Merge branch 'nfs-for-2.6.32' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming
Conflicts:
net/sunrpc/cache.c
diff --git a/.gitignore b/.gitignore
index cecb3b0..b93fb7e 100644
--- a/.gitignore
+++ b/.gitignore
@@ -27,6 +27,7 @@
*.gz
*.lzma
*.patch
+*.gcno
#
# Top-level generic files
diff --git a/CREDITS b/CREDITS
index 2b88fb3..1a41bf4 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1856,7 +1856,7 @@
D: The Linux Support Team Erlangen
N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
D: 6pack driver for AX.25
N: Harald Koerfgen
@@ -2006,6 +2006,9 @@
D: Soundblaster driver fixes, ISAPnP quirk
S: California, USA
+N: Jonathan Layes
+D: ARPD support
+
N: Tom Lees
E: tom@lpsg.demon.co.uk
W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@
S: 2612 XV Delft
S: The Netherlands
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
N: David Woodhouse
E: dwmw2@infradead.org
D: JFFS2 file system, Memory Technology Device subsystem,
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index cbbd3e0..5f3beda 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -94,28 +94,37 @@
Date: May 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
- This is the smallest unit the storage device can write
- without resorting to read-modify-write operation. It is
- usually the same as the logical block size but may be
- bigger. One example is SATA drives with 4KB sectors
- that expose a 512-byte logical block size to the
- operating system.
+ This is the smallest unit a physical storage device can
+ write atomically. It is usually the same as the logical
+ block size but may be bigger. One example is SATA
+ drives with 4KB sectors that expose a 512-byte logical
+ block size to the operating system. For stacked block
+ devices the physical_block_size variable contains the
+ maximum physical_block_size of the component devices.
What: /sys/block/<disk>/queue/minimum_io_size
Date: April 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
- Storage devices may report a preferred minimum I/O size,
- which is the smallest request the device can perform
- without incurring a read-modify-write penalty. For disk
- drives this is often the physical block size. For RAID
- arrays it is often the stripe chunk size.
+ Storage devices may report a granularity or preferred
+ minimum I/O size which is the smallest request the
+ device can perform without incurring a performance
+ penalty. For disk drives this is often the physical
+ block size. For RAID arrays it is often the stripe
+ chunk size. A properly aligned multiple of
+ minimum_io_size is the preferred request size for
+ workloads where a high number of I/O operations is
+ desired.
What: /sys/block/<disk>/queue/optimal_io_size
Date: April 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
Storage devices may report an optimal I/O size, which is
- the device's preferred unit of receiving I/O. This is
- rarely reported for disk drives. For RAID devices it is
- usually the stripe width or the internal block size.
+ the device's preferred unit for sustained I/O. This is
+ rarely reported for disk drives. For RAID arrays it is
+ usually the stripe width or the internal track size. A
+ properly aligned multiple of optimal_io_size is the
+ preferred request size for workloads where sustained
+ throughput is desired. If no optimal I/O size is
+ reported this file contains 0.
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index a50d6cd..992e67e 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -449,8 +449,8 @@
</para>
<programlisting>
-__u32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &ipaddress);
</programlisting>
<para>
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index e369866..f3f37f1 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -184,8 +184,6 @@
!Finclude/net/mac80211.h ieee80211_ctstoself_get
!Finclude/net/mac80211.h ieee80211_ctstoself_duration
!Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
!Finclude/net/mac80211.h ieee80211_wake_queue
!Finclude/net/mac80211.h ieee80211_stop_queue
!Finclude/net/mac80211.h ieee80211_wake_queues
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 93cb28d..18f9651 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -83,11 +83,12 @@
obj = kmem_cache_alloc(...);
lock_chain(); // typically a spin_lock()
obj->key = key;
-atomic_inc(&obj->refcnt);
/*
* we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
*/
smp_wmb();
+atomic_set(&obj->refcnt, 1);
hlist_add_head_rcu(&obj->obj_node, list);
unlock_chain(); // typically a spin_unlock()
@@ -159,6 +160,10 @@
obj = kmem_cache_alloc(cachep);
lock_chain(); // typically a spin_lock()
obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
atomic_set(&obj->refcnt, 1);
/*
* insert obj in RCU way (readers might be traversing chain)
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index 43cb100..9d58c7c5 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -21,6 +21,8 @@
For SA11xx and Xscale, this is used to
setup a minicache mapping.
+ffff4000 ffffffff cache aliasing on ARMv6 and later CPUs.
+
ffff1000 ffff7fff Reserved.
Platforms must not use this address range.
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt
index e8ca040..2d735b0a 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.txt
@@ -50,7 +50,7 @@
scatter-gather lists.
The controller will interleave the buffers on write and split them on
-read. This means that the Linux can DMA the data buffers to and from
+read. This means that Linux can DMA the data buffers to and from
host memory without changes to the page cache.
Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@
The IP checksum is weaker than the CRC in terms of detecting bit
errors. However, the strength is really in the separation of the data
-buffers and the integrity metadata. These two distinct buffers much
+buffers and the integrity metadata. These two distinct buffers must
match up for an I/O to complete.
The separation of the data and integrity metadata buffers as well as
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index f9ca389..1d7e978 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -777,6 +777,18 @@
# /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4
# /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus -> clear cpus list
+
2.3 Setting flags
-----------------
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index f688eba..6a5be5d 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -1,7 +1,7 @@
/*
* cn_test.c
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@
module_exit(cn_test_fini);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Connector's test module");
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
index d738cde..c5092ad 100644
--- a/Documentation/connector/ucon.c
+++ b/Documentation/connector/ucon.c
@@ -1,7 +1,7 @@
/*
* ucon.c
*
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 8213216..60120fb 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -207,8 +207,8 @@
~~~~~~~~~~
struct driver_attribute {
struct attribute attr;
- ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
- ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+ ssize_t (*show)(struct device_driver *driver, char *buf);
+ ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
};
Device drivers can export attributes via their sysfs directories.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index a52adfc9..3d1b0ab 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -25,7 +25,7 @@
"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
- "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+ "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@
$allfiles;
}
+sub mpc718 {
+ my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+ my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+ my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+ wgetfile($archive, $url);
+ unzip($archive, $tmpdir);
+
+ my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+ my $found = 0;
+
+ open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+ binmode IN;
+ open OUT, '>', $fwfile;
+ binmode OUT;
+ {
+ # Block scope because we change the line terminator variable $/
+ my $prevlen = 0;
+ my $currlen;
+
+ # Buried in the data segment are 3 runs of almost identical
+ # register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+ # command for the MT352.
+ # Pull out the middle run (because it's easy) of register-value
+ # pairs to make the "firmware" file.
+
+ local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+ while (<IN>) {
+ $currlen = length($_);
+ if ($prevlen == $currlen && $currlen <= 64) {
+ chop; chop; # Get rid of "TUNER GO"
+ s/^\0\0//; # get rid of leading 00 00 if it's there
+ printf OUT "$_";
+ $found = 1;
+ last;
+ }
+ $prevlen = $currlen;
+ }
+ }
+ close OUT;
+ close IN;
+ if (!$found) {
+ unlink $fwfile;
+ die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+ }
+ $fwfile;
+}
+
sub cx23885 {
my $url = "http://linuxtv.org/downloads/firmware/";
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f8cd450..09e031c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -458,3 +458,13 @@
but the old version has been kept around for easier testing. Note this
doesn't impact the old P5 and WinChip machine check handlers.
Who: Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+ exported interface anymore.
+When: 2.6.33
+Why: cpu_policy_rwsem has a new cleaner definition making it local to
+ cpufreq core and contained inside cpufreq.c. Other dependent
+ drivers should not use it in order to safely avoid lockdep issues.
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
diff --git a/Documentation/filesystems/nfs.txt b/Documentation/filesystems/nfs.txt
new file mode 100644
index 0000000..f50f26c
--- /dev/null
+++ b/Documentation/filesystems/nfs.txt
@@ -0,0 +1,98 @@
+
+The NFS client
+==============
+
+The NFS version 2 protocol was first documented in RFC1094 (March 1989).
+Since then two more major releases of NFS have been published, with NFSv3
+being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
+2003).
+
+The Linux NFS client currently supports all the above published versions,
+and work is in progress on adding support for minor version 1 of the NFSv4
+protocol.
+
+The purpose of this document is to provide information on some of the
+upcall interfaces that are used in order to provide the NFS client with
+some of the information that it requires in order to fully comply with
+the NFS spec.
+
+The DNS resolver
+================
+
+NFSv4 allows for one server to refer the NFS client to data that has been
+migrated onto another server by means of the special "fs_locations"
+attribute. See
+ http://tools.ietf.org/html/rfc3530#section-6
+and
+ http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+
+The fs_locations information can take the form of either an ip address and
+a path, or a DNS hostname and a path. The latter requires the NFS client to
+do a DNS lookup in order to mount the new volume, and hence the need for an
+upcall to allow userland to provide this service.
+
+Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
+/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
+
+ (1) The process checks the dns_resolve cache to see if it contains a
+ valid entry. If so, it returns that entry and exits.
+
+ (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
+ (may be changed using the 'nfs.cache_getent' kernel boot parameter)
+ is run, with two arguments:
+ - the cache name, "dns_resolve"
+ - the hostname to resolve
+
+ (3) After looking up the corresponding ip address, the helper script
+ writes the result into the rpc_pipefs pseudo-file
+ '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
+ in the following (text) format:
+
+ "<ip address> <hostname> <ttl>\n"
+
+ Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
+ (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
+ <hostname> is identical to the second argument of the helper
+ script, and <ttl> is the 'time to live' of this cache entry (in
+ units of seconds).
+
+ Note: If <ip address> is invalid, say the string "0", then a negative
+ entry is created, which will cause the kernel to treat the hostname
+ as having no valid DNS translation.
+
+
+
+
+A basic sample /sbin/nfs_cache_getent
+=====================================
+
+#!/bin/bash
+#
+ttl=600
+#
+cut=/usr/bin/cut
+getent=/usr/bin/getent
+rpc_pipefs=/var/lib/nfs/rpc_pipefs
+#
+die()
+{
+ echo "Usage: $0 cache_name entry_name"
+ exit 1
+}
+
+[ $# -lt 2 ] && die
+cachename="$1"
+cache_path=${rpc_pipefs}/cache/${cachename}/channel
+
+case "${cachename}" in
+ dns_resolve)
+ name="$2"
+ result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
+ [ -z "${result}" ] && result="0"
+ ;;
+ *)
+ die
+ ;;
+esac
+echo "${result} ${name} ${ttl}" >${cache_path}
+
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 7e81e37..b245d52 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -23,7 +23,8 @@
Using sysfs
~~~~~~~~~~~
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
mount -t sysfs sysfs /sys
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
index e716aad..40ec633 100644
--- a/Documentation/gcov.txt
+++ b/Documentation/gcov.txt
@@ -188,13 +188,18 @@
GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
corresponding Makefile.
+Problem: Files copied from sysfs appear empty or incomplete.
+Cause: Due to the way seq_file works, some tools such as cp or tar
+ may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+ Alternatively use the mechanism shown in Appendix B.
+
Appendix A: gather_on_build.sh
==============================
Sample script to gather coverage meta files on the build machine
(see 6a):
-
#!/bin/bash
KSRC=$1
@@ -226,7 +231,7 @@
Sample script to gather coverage data files on the test machine
(see 6b):
-#!/bin/bash
+#!/bin/bash -e
DEST=$1
GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@
exit 1
fi
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
-if [ $? -eq 0 ] ; then
- echo "$DEST successfully created, copy to build system and unpack with:"
- echo " tar xfz $DEST"
-else
- echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo " tar xfz $DEST"
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 7bb0d93..dbea4f9 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -139,6 +139,7 @@
'm' all linux/synclink.h conflict!
'm' 00-1F net/irda/irmod.h conflict!
'n' 00-7F linux/ncp_fs.h
+'n' 80-8F linux/nilfs2_fs.h NILFS2
'n' E0-FF video/matrox.h matroxfb
'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2
'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d08759a..ce88537 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1115,6 +1115,10 @@
libata.dma=4 Compact Flash DMA only
Combinations also work, so libata.dma=3 enables DMA
for disks and CDROMs, but not CFs.
+
+ libata.ignore_hpa= [LIBATA] Ignore HPA limit
+ libata.ignore_hpa=0 keep BIOS limits (default)
+ libata.ignore_hpa=1 ignore limits, using full disk
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
@@ -1499,6 +1503,14 @@
[NFS] set the TCP port on which the NFSv4 callback
channel should listen.
+ nfs.cache_getent=
+ [NFS] sets the pathname to the program which is used
+ to update the NFS client cache entries.
+
+ nfs.cache_getent_timeout=
+ [NFS] sets the timeout after which an attempt to
+ update a cache entry is deemed to have failed.
+
nfs.idmap_cache_timeout=
[NFS] set the maximum lifetime for idmapper cache
entries.
@@ -1720,8 +1732,8 @@
oprofile.cpu_type= Force an oprofile cpu type
This might be useful if you have an older oprofile
userland or if you want common events.
- Format: { archperfmon }
- archperfmon: [X86] Force use of architectural
+ Format: { arch_perfmon }
+ arch_perfmon: [X86] Force use of architectural
perfmon on Intel CPUs instead of the
CPU specific event set.
@@ -1915,6 +1927,12 @@
Format: { 0 | 1 }
See arch/parisc/kernel/pdc_chassis.c
+ percpu_alloc= [X86] Select which percpu first chunk allocator to use.
+ Allowed values are one of "lpage", "embed" and "4k".
+ See comments in arch/x86/kernel/setup_percpu.c for
+ details on each allocator. This parameter is primarily
+ for debugging and performance comparison.
+
pf. [PARIDE]
See Documentation/blockdev/paride.txt.
@@ -2385,6 +2403,18 @@
stifb= [HW]
Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
+ sunrpc.min_resvport=
+ sunrpc.max_resvport=
+ [NFS,SUNRPC]
+ SunRPC servers often require that client requests
+ originate from a privileged port (i.e. a port in the
+ range 0 < portnr < 1024).
+ An administrator who wishes to reserve some of these
+ ports for other uses may adjust the range that the
+ kernel's sunrpc client considers to be privileged
+ using these two parameters to set the minimum and
+ maximum port values.
+
sunrpc.pool_mode=
[NFS]
Control how the NFS server code allocates CPUs to
@@ -2401,6 +2431,15 @@
pernode one pool for each NUMA node (equivalent
to global on non-NUMA machines)
+ sunrpc.tcp_slot_table_entries=
+ sunrpc.udp_slot_table_entries=
+ [NFS,SUNRPC]
+ Sets the upper limit on the number of simultaneous
+ RPC calls that can be sent from the client to a
+ server. Increasing these values may allow you to
+ improve throughput, but will also increase the
+ amount of memory reserved for use by the client.
+
swiotlb= [IA-64] Number of I/O TLB slabs
switches= [HW,M68k]
@@ -2467,7 +2506,8 @@
tp720= [HW,PS2]
- trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+ trace_buf_size=nn[KMG]
+ [FTRACE] will set tracing buffer size.
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format:
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 0112da3..8906803 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -16,13 +16,17 @@
-----
CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
# mount -t debugfs nodev /sys/kernel/debug/
# cat /sys/kernel/debug/kmemleak
+To trigger an intermediate memory scan:
+
+ # echo scan > /sys/kernel/debug/kmemleak
+
Note that the orphan objects are listed in the order they were allocated
and one object at the beginning of the list may cause other subsequent
objects to be reported as orphan.
@@ -31,16 +35,21 @@
/sys/kernel/debug/kmemleak file. The following parameters are supported:
off - disable kmemleak (irreversible)
- stack=on - enable the task stacks scanning
+ stack=on - enable the task stacks scanning (default)
stack=off - disable the tasks stacks scanning
- scan=on - start the automatic memory scanning thread
+ scan=on - start the automatic memory scanning thread (default)
scan=off - stop the automatic memory scanning thread
- scan=<secs> - set the automatic memory scanning period in seconds (0
- to disable it)
+ scan=<secs> - set the automatic memory scanning period in seconds
+ (default 600, 0 to stop the automatic scanning)
+ scan - trigger a memory scan
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
the kernel command line.
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
Basic Algorithm
---------------
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index f2296ec..e2ddcde 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -36,8 +36,6 @@
- Bluetooth enable and disable
- video output switching, expansion control
- ThinkLight on and off
- - limited docking and undocking
- - UltraBay eject
- CMOS/UCMS control
- LED control
- ACPI sounds
@@ -729,131 +727,6 @@
It is impossible to know if the status returned through sysfs is valid.
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
- ibm/dock GDCK 00000003 00000001 -- eject request
- ibm/dock GDCK 00000003 00000002 -- undocked
- ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
- Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
- echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
- echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
- ibm/bay MSTR 00000003 00000000 -- eject request
- ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
- Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
- echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
- echo eject > /proc/acpi/ibm/bay
- put the ThinkPad to sleep
- remove the drive
- resume from sleep
- cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
CMOS/UCMS control
-----------------
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
new file mode 100644
index 0000000..c6eda18
--- /dev/null
+++ b/Documentation/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+ * National Semiconductor LP3944 Fun-light Chip
+ Prefix: 'lp3944'
+ Addresses scanned: None (see the Notes section below)
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+ Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+ - period: from 0s to 1.6s
+ - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("lp3944", 0x60),
+ .platform_data = &a910_lp3944_leds,
+ },
+ };
+
+and register it in the platform init function
+
+ i2c_register_board_info(0, a910_i2c_board_info,
+ ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 9ebcd6e..950cde6 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,7 +1,9 @@
-/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and
- * the virtual devices, then opens /dev/lguest to tell the kernel
- * about the Guest and control it. :*/
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
@@ -46,13 +48,15 @@
#include "linux/virtio_rng.h"
#include "linux/virtio_ring.h"
#include "asm/bootparam.h"
-/*L:110 We can ignore the 39 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
*
* As Linus said, "C is a Spartan language, and so should your naming be." I
* like these abbreviations, so we define them here. Note that u64 is always
* unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64. */
+ * use %llu in printf for any u64.
+ */
typedef unsigned long long u64;
typedef uint32_t u32;
typedef uint16_t u16;
@@ -69,8 +73,10 @@
/* This will occupy 3 pages: it must be a power of 2. */
#define VIRTQUEUE_NUM 256
-/*L:120 verbose is both a global flag and a macro. The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here. */
+/*L:120
+ * verbose is both a global flag and a macro. The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
static bool verbose;
#define verbose(args...) \
do { if (verbose) printf(args); } while(0)
@@ -87,8 +93,7 @@
static unsigned int __thread cpu_id;
/* This is our list of devices. */
-struct device_list
-{
+struct device_list {
/* Counter to assign interrupt numbers. */
unsigned int next_irq;
@@ -100,8 +105,7 @@
/* A single linked list of devices. */
struct device *dev;
- /* And a pointer to the last device for easy append and also for
- * configuration appending. */
+ /* And a pointer to the last device for easy append. */
struct device *lastdev;
};
@@ -109,8 +113,7 @@
static struct device_list devices;
/* The device structure describes a single device. */
-struct device
-{
+struct device {
/* The linked-list pointer. */
struct device *next;
@@ -135,8 +138,7 @@
};
/* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue
-{
+struct virtqueue {
struct virtqueue *next;
/* Which device owns me. */
@@ -168,20 +170,24 @@
/* The original tty settings to restore on exit. */
static struct termios orig_term;
-/* We have to be careful with barriers: our devices are all run in separate
+/*
+ * We have to be careful with barriers: our devices are all run in separate
* threads and so we need to make sure that changes visible to the Guest happen
- * in precise order. */
+ * in precise order.
+ */
#define wmb() __asm__ __volatile__("" : : : "memory")
#define mb() __asm__ __volatile__("" : : : "memory")
-/* Convert an iovec element to the given type.
+/*
+ * Convert an iovec element to the given type.
*
* This is a fairly ugly trick: we need to know the size of the type and
* alignment requirement to check the pointer is kosher. It's also nice to
* have the name of the type in case we report failure.
*
* Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function. */
+ * have a macro which sets them all up and passes to the real function.
+ */
#define convert(iov, type) \
((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
@@ -198,8 +204,10 @@
/* Wrapper for the last available index. Makes it easier to change. */
#define lg_last_avail(vq) ((vq)->last_avail_idx)
-/* The virtio configuration space is defined to be little-endian. x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers. */
+/*
+ * The virtio configuration space is defined to be little-endian. x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
#define cpu_to_le16(v16) (v16)
#define cpu_to_le32(v32) (v32)
#define cpu_to_le64(v64) (v64)
@@ -241,11 +249,12 @@
+ dev->num_vq * sizeof(struct lguest_vqconfig);
}
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free! Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone likes to hack on the
- * kernel!). Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section. Or, maybe not.
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free! Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section. Or, maybe not.
*
* The Launcher sets up a big chunk of memory to be the Guest's "physical"
* memory and stores it in "guest_base". In other words, Guest physical ==
@@ -253,7 +262,8 @@
*
* This can be tough to get your head around, but usually it just means that we
* use these trivial conversion functions when the Guest gives us it's
- * "physical" addresses: */
+ * "physical" addresses:
+ */
static void *from_guest_phys(unsigned long addr)
{
return guest_base + addr;
@@ -268,7 +278,8 @@
* Loading the Kernel.
*
* We start with couple of simple helper routines. open_or_die() avoids
- * error-checking code cluttering the callers: */
+ * error-checking code cluttering the callers:
+ */
static int open_or_die(const char *name, int flags)
{
int fd = open(name, flags);
@@ -283,12 +294,19 @@
int fd = open_or_die("/dev/zero", O_RDONLY);
void *addr;
- /* We use a private mapping (ie. if we write to the page, it will be
- * copied). */
+ /*
+ * We use a private mapping (ie. if we write to the page, it will be
+ * copied).
+ */
addr = mmap(NULL, getpagesize() * num,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
if (addr == MAP_FAILED)
err(1, "Mmaping %u pages of /dev/zero", num);
+
+ /*
+ * One neat mmap feature is that you can close the fd, and it
+ * stays mapped.
+ */
close(fd);
return addr;
@@ -305,20 +323,24 @@
return addr;
}
-/* This routine is used to load the kernel or initrd. It tries mmap, but if
+/*
+ * This routine is used to load the kernel or initrd. It tries mmap, but if
* that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in. */
+ * it falls back to reading the memory in.
+ */
static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
{
ssize_t r;
- /* We map writable even though for some segments are marked read-only.
+ /*
+ * We map writable even though for some segments are marked read-only.
* The kernel really wants to be writable: it patches its own
* instructions.
*
* MAP_PRIVATE means that the page won't be copied until a write is
* done to it. This allows us to share untouched memory between
- * Guests. */
+ * Guests.
+ */
if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
return;
@@ -329,7 +351,8 @@
err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
}
-/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
* the Guest memory. ELF = Embedded Linking Format, which is the format used
* by all modern binaries on Linux including the kernel.
*
@@ -337,23 +360,28 @@
* address. We use the physical address; the Guest will map itself to the
* virtual address.
*
- * We return the starting address. */
+ * We return the starting address.
+ */
static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
{
Elf32_Phdr phdr[ehdr->e_phnum];
unsigned int i;
- /* Sanity checks on the main ELF header: an x86 executable with a
- * reasonable number of correctly-sized program headers. */
+ /*
+ * Sanity checks on the main ELF header: an x86 executable with a
+ * reasonable number of correctly-sized program headers.
+ */
if (ehdr->e_type != ET_EXEC
|| ehdr->e_machine != EM_386
|| ehdr->e_phentsize != sizeof(Elf32_Phdr)
|| ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
errx(1, "Malformed elf header");
- /* An ELF executable contains an ELF header and a number of "program"
+ /*
+ * An ELF executable contains an ELF header and a number of "program"
* headers which indicate which parts ("segments") of the program to
- * load where. */
+ * load where.
+ */
/* We read in all the program headers at once: */
if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
@@ -361,8 +389,10 @@
if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
err(1, "Reading program headers");
- /* Try all the headers: there are usually only three. A read-only one,
- * a read-write one, and a "note" section which we don't load. */
+ /*
+ * Try all the headers: there are usually only three. A read-only one,
+ * a read-write one, and a "note" section which we don't load.
+ */
for (i = 0; i < ehdr->e_phnum; i++) {
/* If this isn't a loadable segment, we ignore it */
if (phdr[i].p_type != PT_LOAD)
@@ -380,13 +410,15 @@
return ehdr->e_entry;
}
-/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded. You're
- * supposed to jump into it and it will unpack itself. We used to have to
- * perform some hairy magic because the unpacking code scared me.
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded. You're supposed
+ * to jump into it and it will unpack itself. We used to have to perform some
+ * hairy magic because the unpacking code scared me.
*
* Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
* a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go! */
+ * the funky header so we know where in the file to load, and away we go!
+ */
static unsigned long load_bzimage(int fd)
{
struct boot_params boot;
@@ -394,8 +426,10 @@
/* Modern bzImages get loaded at 1M. */
void *p = from_guest_phys(0x100000);
- /* Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/x86/i386/boot.txt) */
+ /*
+ * Go back to the start of the file and read the header. It should be
+ * a Linux boot header (see Documentation/x86/i386/boot.txt)
+ */
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));
@@ -414,9 +448,11 @@
return boot.hdr.code32_start;
}
-/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
* come wrapped up in the self-decompressing "bzImage" format. With a little
- * work, we can load those, too. */
+ * work, we can load those, too.
+ */
static unsigned long load_kernel(int fd)
{
Elf32_Ehdr hdr;
@@ -433,24 +469,28 @@
return load_bzimage(fd);
}
-/* This is a trivial little helper to align pages. Andi Kleen hated it because
+/*
+ * This is a trivial little helper to align pages. Andi Kleen hated it because
* it calls getpagesize() twice: "it's dumb code."
*
* Kernel guys get really het up about optimization, even when it's not
- * necessary. I leave this code as a reaction against that. */
+ * necessary. I leave this code as a reaction against that.
+ */
static inline unsigned long page_align(unsigned long addr)
{
/* Add upwards and truncate downwards. */
return ((addr + getpagesize()-1) & ~(getpagesize()-1));
}
-/*L:180 An "initial ram disk" is a disk image loaded into memory along with
- * the kernel which the kernel can use to boot from without needing any
- * drivers. Most distributions now use this as standard: the initrd contains
- * the code to load the appropriate driver modules for the current machine.
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
*
* Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels. He sent me this (and tells me when I break it). */
+ * kernels. He sent me this (and tells me when I break it).
+ */
static unsigned long load_initrd(const char *name, unsigned long mem)
{
int ifd;
@@ -462,12 +502,16 @@
if (fstat(ifd, &st) < 0)
err(1, "fstat() on initrd '%s'", name);
- /* We map the initrd at the top of memory, but mmap wants it to be
- * page-aligned, so we round the size up for that. */
+ /*
+ * We map the initrd at the top of memory, but mmap wants it to be
+ * page-aligned, so we round the size up for that.
+ */
len = page_align(st.st_size);
map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
- /* Once a file is mapped, you can close the file descriptor. It's a
- * little odd, but quite useful. */
+ /*
+ * Once a file is mapped, you can close the file descriptor. It's a
+ * little odd, but quite useful.
+ */
close(ifd);
verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
@@ -476,8 +520,10 @@
}
/*:*/
-/* Simple routine to roll all the commandline arguments together with spaces
- * between them. */
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
static void concat(char *dst, char *args[])
{
unsigned int i, len = 0;
@@ -494,10 +540,12 @@
dst[len] = '\0';
}
-/*L:185 This is where we actually tell the kernel to initialize the Guest. We
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest. We
* saw the arguments it expects when we looked at initialize() in lguest_user.c:
* the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest. */
+ * entry point for the Guest.
+ */
static void tell_kernel(unsigned long start)
{
unsigned long args[] = { LHREQ_INITIALIZE,
@@ -511,7 +559,7 @@
}
/*:*/
-/*
+/*L:200
* Device Handling.
*
* When the Guest gives us a buffer, it sends an array of addresses and sizes.
@@ -522,20 +570,26 @@
static void *_check_pointer(unsigned long addr, unsigned int size,
unsigned int line)
{
- /* We have to separately check addr and addr+size, because size could
- * be huge and addr + size might wrap around. */
+ /*
+ * We have to separately check addr and addr+size, because size could
+ * be huge and addr + size might wrap around.
+ */
if (addr >= guest_limit || addr + size >= guest_limit)
errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
- /* We return a pointer for the caller's convenience, now we know it's
- * safe to use. */
+ /*
+ * We return a pointer for the caller's convenience, now we know it's
+ * safe to use.
+ */
return from_guest_phys(addr);
}
/* A macro which transparently hands the line number to the real function. */
#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
-/* Each buffer in the virtqueues is actually a chain of descriptors. This
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors. This
* function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end. */
+ * at the end.
+ */
static unsigned next_desc(struct vring_desc *desc,
unsigned int i, unsigned int max)
{
@@ -556,7 +610,10 @@
return next;
}
-/* This actually sends the interrupt for this virtqueue */
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
static void trigger_irq(struct virtqueue *vq)
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
@@ -576,12 +633,14 @@
err(1, "Triggering irq %i", vq->config.irq);
}
-/* This looks in the virtqueue and for the first available buffer, and converts
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
* it to an iovec for convenient access. Since descriptors consist of some
* number of output then some number of input descriptors, it's actually two
* iovecs, but we pack them into one and note how many of each there were.
*
- * This function returns the descriptor number found. */
+ * This function waits if necessary, and returns the descriptor number found.
+ */
static unsigned wait_for_vq_desc(struct virtqueue *vq,
struct iovec iov[],
unsigned int *out_num, unsigned int *in_num)
@@ -590,17 +649,23 @@
struct vring_desc *desc;
u16 last_avail = lg_last_avail(vq);
+ /* There's nothing available? */
while (last_avail == vq->vring.avail->idx) {
u64 event;
- /* OK, tell Guest about progress up to now. */
+ /*
+ * Since we're about to sleep, now is a good time to tell the
+ * Guest about what we've used up to now.
+ */
trigger_irq(vq);
/* OK, now we need to know about added descriptors. */
vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
- /* They could have slipped one in as we were doing that: make
- * sure it's written, then check again. */
+ /*
+ * They could have slipped one in as we were doing that: make
+ * sure it's written, then check again.
+ */
mb();
if (last_avail != vq->vring.avail->idx) {
vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
@@ -620,8 +685,10 @@
errx(1, "Guest moved used index from %u to %u",
last_avail, vq->vring.avail->idx);
- /* Grab the next descriptor number they're advertising, and increment
- * the index we've seen. */
+ /*
+ * Grab the next descriptor number they're advertising, and increment
+ * the index we've seen.
+ */
head = vq->vring.avail->ring[last_avail % vq->vring.num];
lg_last_avail(vq)++;
@@ -636,8 +703,10 @@
desc = vq->vring.desc;
i = head;
- /* If this is an indirect entry, then this buffer contains a descriptor
- * table which we handle as if it's any normal descriptor chain. */
+ /*
+ * If this is an indirect entry, then this buffer contains a descriptor
+ * table which we handle as if it's any normal descriptor chain.
+ */
if (desc[i].flags & VRING_DESC_F_INDIRECT) {
if (desc[i].len % sizeof(struct vring_desc))
errx(1, "Invalid size for indirect buffer table");
@@ -656,8 +725,10 @@
if (desc[i].flags & VRING_DESC_F_WRITE)
(*in_num)++;
else {
- /* If it's an output descriptor, they're all supposed
- * to come before any input descriptors. */
+ /*
+ * If it's an output descriptor, they're all supposed
+ * to come before any input descriptors.
+ */
if (*in_num)
errx(1, "Descriptor has out after in");
(*out_num)++;
@@ -671,14 +742,19 @@
return head;
}
-/* After we've used one of their buffers, we tell them about it. We'll then
- * want to send them an interrupt, using trigger_irq(). */
+/*
+ * After we've used one of their buffers, we tell the Guest about it. Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
static void add_used(struct virtqueue *vq, unsigned int head, int len)
{
struct vring_used_elem *used;
- /* The virtqueue contains a ring of used buffers. Get a pointer to the
- * next entry in that used ring. */
+ /*
+ * The virtqueue contains a ring of used buffers. Get a pointer to the
+ * next entry in that used ring.
+ */
used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
used->id = head;
used->len = len;
@@ -698,9 +774,9 @@
/*
* The Console
*
- * We associate some data with the console for our exit hack. */
-struct console_abort
-{
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
/* How many times have they hit ^C? */
int count;
/* When did they start? */
@@ -715,30 +791,35 @@
struct console_abort *abort = vq->dev->priv;
struct iovec iov[vq->vring.num];
- /* Make sure there's a descriptor waiting. */
+ /* Make sure there's a descriptor available. */
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
if (out_num)
errx(1, "Output buffers in console in queue?");
- /* Read it in. */
+ /* Read into it. This is where we usually wait. */
len = readv(STDIN_FILENO, iov, in_num);
if (len <= 0) {
/* Ran out of input? */
warnx("Failed to get console input, ignoring console.");
- /* For simplicity, dying threads kill the whole Launcher. So
- * just nap here. */
+ /*
+ * For simplicity, dying threads kill the whole Launcher. So
+ * just nap here.
+ */
for (;;)
pause();
}
+ /* Tell the Guest we used a buffer. */
add_used_and_trigger(vq, head, len);
- /* Three ^C within one second? Exit.
+ /*
+ * Three ^C within one second? Exit.
*
* This is such a hack, but works surprisingly well. Each ^C has to
* be in a buffer by itself, so they can't be too fast. But we check
* that we get three within about a second, so they can't be too
- * slow. */
+ * slow.
+ */
if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
abort->count = 0;
return;
@@ -763,15 +844,23 @@
unsigned int head, out, in;
struct iovec iov[vq->vring.num];
+ /* We usually wait in here, for the Guest to give us something. */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (in)
errx(1, "Input buffers in console output queue?");
+
+ /* writev can return a partial write, so we loop here. */
while (!iov_empty(iov, out)) {
int len = writev(STDOUT_FILENO, iov, out);
if (len <= 0)
err(1, "Write to stdout gave %i", len);
iov_consume(iov, out, len);
}
+
+ /*
+ * We're finished with that buffer: if we're going to sleep,
+ * wait_for_vq_desc() will prod the Guest with an interrupt.
+ */
add_used(vq, head, 0);
}
@@ -791,15 +880,30 @@
unsigned int head, out, in;
struct iovec iov[vq->vring.num];
+ /* We usually wait in here for the Guest to give us a packet. */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (in)
errx(1, "Input buffers in net output queue?");
+ /*
+ * Send the whole thing through to /dev/net/tun. It expects the exact
+ * same format: what a coincidence!
+ */
if (writev(net_info->tunfd, iov, out) < 0)
errx(1, "Write to tun failed?");
+
+ /*
+ * Done with that one; wait_for_vq_desc() will send the interrupt if
+ * all packets are processed.
+ */
add_used(vq, head, 0);
}
-/* Will reading from this file descriptor block? */
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
static bool will_block(int fd)
{
fd_set fdset;
@@ -809,8 +913,11 @@
return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
}
-/* This is where we handle packets coming in from the tun device to our
- * Guest. */
+/*
+ * This handles packets coming in from the tun device to our Guest. Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
static void net_input(struct virtqueue *vq)
{
int len;
@@ -818,21 +925,38 @@
struct iovec iov[vq->vring.num];
struct net_info *net_info = vq->dev->priv;
+ /*
+ * Get a descriptor to write an incoming packet into. This will also
+ * send an interrupt if they're out of descriptors.
+ */
head = wait_for_vq_desc(vq, iov, &out, &in);
if (out)
errx(1, "Output buffers in net input queue?");
- /* Deliver interrupt now, since we're about to sleep. */
+ /*
+ * If it looks like we'll block reading from the tun device, send them
+ * an interrupt.
+ */
if (vq->pending_used && will_block(net_info->tunfd))
trigger_irq(vq);
+ /*
+ * Read in the packet. This is where we normally wait (when there's no
+ * incoming network traffic).
+ */
len = readv(net_info->tunfd, iov, in);
if (len <= 0)
err(1, "Failed to read from tun.");
+
+ /*
+ * Mark that packet buffer as used, but don't interrupt here. We want
+ * to wait until we've done as much work as we can.
+ */
add_used(vq, head, len);
}
+/*:*/
-/* This is the helper to create threads. */
+/* This is the helper to create threads: run the service routine in a loop. */
static int do_thread(void *_vq)
{
struct virtqueue *vq = _vq;
@@ -842,8 +966,10 @@
return 0;
}
-/* When a child dies, we kill our entire process group with SIGTERM. This
- * also has the side effect that the shell restores the console for us! */
+/*
+ * When a child dies, we kill our entire process group with SIGTERM. This
+ * also has the side effect that the shell restores the console for us!
+ */
static void kill_launcher(int signal)
{
kill(0, SIGTERM);
@@ -878,11 +1004,15 @@
signal(SIGCHLD, (void *)kill_launcher);
}
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
static void create_thread(struct virtqueue *vq)
{
- /* Create stack for thread and run it. Since stack grows
- * upwards, we point the stack pointer to the end of this
- * region. */
+ /*
+ * Create stack for thread. Since the stack grows upwards, we point
+ * the stack pointer to the end of this region.
+ */
char *stack = malloc(32768);
unsigned long args[] = { LHREQ_EVENTFD,
vq->config.pfn*getpagesize(), 0 };
@@ -893,17 +1023,22 @@
err(1, "Creating eventfd");
args[2] = vq->eventfd;
- /* Attach an eventfd to this virtqueue: it will go off
- * when the Guest does an LHCALL_NOTIFY for this vq. */
+ /*
+ * Attach an eventfd to this virtqueue: it will go off when the Guest
+ * does an LHCALL_NOTIFY for this vq.
+ */
if (write(lguest_fd, &args, sizeof(args)) != 0)
err(1, "Attaching eventfd");
- /* CLONE_VM: because it has to access the Guest memory, and
- * SIGCHLD so we get a signal if it dies. */
+ /*
+ * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+ * we get a signal if it dies.
+ */
vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
if (vq->thread == (pid_t)-1)
err(1, "Creating clone");
- /* We close our local copy, now the child has it. */
+
+ /* We close our local copy now the child has it. */
close(vq->eventfd);
}
@@ -955,7 +1090,10 @@
}
}
-/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In
+ * particular, it's used to notify us of device status changes during boot.
+ */
static void handle_output(unsigned long addr)
{
struct device *i;
@@ -964,25 +1102,42 @@
for (i = devices.dev; i; i = i->next) {
struct virtqueue *vq;
- /* Notifications to device descriptors update device status. */
+ /*
+ * Notifications to device descriptors mean they updated the
+ * device status.
+ */
if (from_guest_phys(addr) == i->desc) {
update_device_status(i);
return;
}
- /* Devices *can* be used before status is set to DRIVER_OK. */
+ /*
+ * Devices *can* be used before status is set to DRIVER_OK.
+ * The original plan was that they would never do this: they
+ * would always finish setting up their status bits before
+ * actually touching the virtqueues. In practice, we allowed
+ * them to, and they do (eg. the disk probes for partition
+ * tables as part of initialization).
+ *
+ * If we see this, we start the device: once it's running, we
+ * expect the device to catch all the notifications.
+ */
for (vq = i->vq; vq; vq = vq->next) {
if (addr != vq->config.pfn*getpagesize())
continue;
if (i->running)
errx(1, "Notification on running %s", i->name);
+ /* This just calls create_thread() for each virtqueue */
start_device(i);
return;
}
}
- /* Early console write is done using notify on a nul-terminated string
- * in Guest memory. */
+ /*
+ * Early console write is done using notify on a nul-terminated string
+ * in Guest memory. It's also great for hacking debugging messages
+ * into a Guest.
+ */
if (addr >= guest_limit)
errx(1, "Bad NOTIFY %#lx", addr);
@@ -998,10 +1153,12 @@
* routines to allocate and manage them.
*/
-/* The layout of the device page is a "struct lguest_device_desc" followed by a
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
* number of virtqueue descriptors, then two sets of feature bits, then an
* array of configuration bytes. This routine returns the configuration
- * pointer. */
+ * pointer.
+ */
static u8 *device_config(const struct device *dev)
{
return (void *)(dev->desc + 1)
@@ -1009,9 +1166,11 @@
+ dev->feature_len * 2;
}
-/* This routine allocates a new "struct lguest_device_desc" from descriptor
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
* table page just above the Guest's normal memory. It returns a pointer to
- * that descriptor. */
+ * that descriptor.
+ */
static struct lguest_device_desc *new_dev_desc(u16 type)
{
struct lguest_device_desc d = { .type = type };
@@ -1032,8 +1191,10 @@
return memcpy(p, &d, sizeof(d));
}
-/* Each device descriptor is followed by the description of its virtqueues. We
- * specify how many descriptors the virtqueue is to have. */
+/*
+ * Each device descriptor is followed by the description of its virtqueues. We
+ * specify how many descriptors the virtqueue is to have.
+ */
static void add_virtqueue(struct device *dev, unsigned int num_descs,
void (*service)(struct virtqueue *))
{
@@ -1050,6 +1211,11 @@
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+
+ /*
+ * This is the routine the service thread will run, and its Process ID
+ * once it's running.
+ */
vq->service = service;
vq->thread = (pid_t)-1;
@@ -1061,10 +1227,12 @@
/* Initialize the vring. */
vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
- /* Append virtqueue to this device's descriptor. We use
+ /*
+ * Append virtqueue to this device's descriptor. We use
* device_config() to get the end of the device's current virtqueues;
* we check that we haven't added any config or feature information
- * yet, otherwise we'd be overwriting them. */
+ * yet, otherwise we'd be overwriting them.
+ */
assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
memcpy(device_config(dev), &vq->config, sizeof(vq->config));
dev->num_vq++;
@@ -1072,14 +1240,18 @@
verbose("Virtqueue page %#lx\n", to_guest_phys(p));
- /* Add to tail of list, so dev->vq is first vq, dev->vq->next is
- * second. */
+ /*
+ * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+ * second.
+ */
for (i = &dev->vq; *i; i = &(*i)->next);
*i = vq;
}
-/* The first half of the feature bitmask is for us to advertise features. The
- * second half is for the Guest to accept features. */
+/*
+ * The first half of the feature bitmask is for us to advertise features. The
+ * second half is for the Guest to accept features.
+ */
static void add_feature(struct device *dev, unsigned bit)
{
u8 *features = get_feature_bits(dev);
@@ -1093,9 +1265,11 @@
features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
}
-/* This routine sets the configuration fields for an existing device's
+/*
+ * This routine sets the configuration fields for an existing device's
* descriptor. It only works for the last device, but that's OK because that's
- * how we use it. */
+ * how we use it.
+ */
static void set_config(struct device *dev, unsigned len, const void *conf)
{
/* Check we haven't overflowed our single page. */
@@ -1105,12 +1279,18 @@
/* Copy in the config information, and store the length. */
memcpy(device_config(dev), conf, len);
dev->desc->config_len = len;
+
+ /* Size must fit in config_len field (8 bits)! */
+ assert(dev->desc->config_len == len);
}
-/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory. We
+ * don't actually start the service threads until later.
*
- * See what I mean about userspace being boring? */
+ * See what I mean about userspace being boring?
+ */
static struct device *new_device(const char *name, u16 type)
{
struct device *dev = malloc(sizeof(*dev));
@@ -1123,10 +1303,12 @@
dev->num_vq = 0;
dev->running = false;
- /* Append to device list. Prepending to a single-linked list is
+ /*
+ * Append to device list. Prepending to a single-linked list is
* easier, but the user expects the devices to be arranged on the bus
* in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc. */
+ * is eth0, the first block device /dev/vda, etc.
+ */
if (devices.lastdev)
devices.lastdev->next = dev;
else
@@ -1136,8 +1318,10 @@
return dev;
}
-/* Our first setup routine is the console. It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be. */
+/*
+ * Our first setup routine is the console. It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
static void setup_console(void)
{
struct device *dev;
@@ -1145,8 +1329,10 @@
/* If we can save the initial standard input settings... */
if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
struct termios term = orig_term;
- /* Then we turn off echo, line buffering and ^C etc. We want a
- * raw input stream to the Guest. */
+ /*
+ * Then we turn off echo, line buffering and ^C etc: We want a
+ * raw input stream to the Guest.
+ */
term.c_lflag &= ~(ISIG|ICANON|ECHO);
tcsetattr(STDIN_FILENO, TCSANOW, &term);
}
@@ -1157,10 +1343,12 @@
dev->priv = malloc(sizeof(struct console_abort));
((struct console_abort *)dev->priv)->count = 0;
- /* The console needs two virtqueues: the input then the output. When
+ /*
+ * The console needs two virtqueues: the input then the output. When
* they put something the input queue, we make sure we're listening to
* stdin. When they put something in the output queue, we write it to
- * stdout. */
+ * stdout.
+ */
add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
@@ -1168,7 +1356,8 @@
}
/*:*/
-/*M:010 Inter-guest networking is an interesting area. Simplest is to have a
+/*M:010
+ * Inter-guest networking is an interesting area. Simplest is to have a
* --sharenet=<name> option which opens or creates a named pipe. This can be
* used to send packets to another guest in a 1:1 manner.
*
@@ -1182,7 +1371,8 @@
* multiple inter-guest channels behind one interface, although it would
* require some manner of hotplugging new virtio channels.
*
- * Finally, we could implement a virtio network switch in the kernel. :*/
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
static u32 str2ip(const char *ipaddr)
{
@@ -1207,11 +1397,13 @@
mac[5] = m[5];
}
-/* This code is "adapted" from libbridge: it attaches the Host end of the
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
* network device to the bridge device specified by the command line.
*
* This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it. */
+ * dislike bridging), and I just try not to break it.
+ */
static void add_to_bridge(int fd, const char *if_name, const char *br_name)
{
int ifidx;
@@ -1231,9 +1423,11 @@
err(1, "can't add %s to bridge %s", if_name, br_name);
}
-/* This sets up the Host end of the network device with an IP address, brings
+/*
+ * This sets up the Host end of the network device with an IP address, brings
* it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer. */
+ * pointer.
+ */
static void configure_device(int fd, const char *tapif, u32 ipaddr)
{
struct ifreq ifr;
@@ -1260,10 +1454,12 @@
/* Start with this zeroed. Messy but sure. */
memset(&ifr, 0, sizeof(ifr));
- /* We open the /dev/net/tun device and tell it we want a tap device. A
+ /*
+ * We open the /dev/net/tun device and tell it we want a tap device. A
* tap device is like a tun device, only somehow different. To tell
* the truth, I completely blundered my way through this code, but it
- * works now! */
+ * works now!
+ */
netfd = open_or_die("/dev/net/tun", O_RDWR);
ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
strcpy(ifr.ifr_name, "tap%d");
@@ -1274,18 +1470,22 @@
TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
err(1, "Could not set features for tun device");
- /* We don't need checksums calculated for packets coming in this
- * device: trust us! */
+ /*
+ * We don't need checksums calculated for packets coming in this
+ * device: trust us!
+ */
ioctl(netfd, TUNSETNOCSUM, 1);
memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
return netfd;
}
-/*L:195 Our network is a Host<->Guest network. This can either use bridging or
+/*L:195
+ * Our network is a Host<->Guest network. This can either use bridging or
* routing, but the principle is the same: it uses the "tun" device to inject
* packets into the Host as if they came in from a normal network card. We
- * just shunt packets between the Guest and the tun device. */
+ * just shunt packets between the Guest and the tun device.
+ */
static void setup_tun_net(char *arg)
{
struct device *dev;
@@ -1302,13 +1502,14 @@
dev = new_device("net", VIRTIO_ID_NET);
dev->priv = net_info;
- /* Network devices need a receive and a send queue, just like
- * console. */
+ /* Network devices need a recv and a send queue, just like console. */
add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
- /* We need a socket to perform the magic network ioctls to bring up the
- * tap interface, connect to the bridge etc. Any socket will do! */
+ /*
+ * We need a socket to perform the magic network ioctls to bring up the
+ * tap interface, connect to the bridge etc. Any socket will do!
+ */
ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
if (ipfd < 0)
err(1, "opening IP socket");
@@ -1362,39 +1563,31 @@
verbose("device %u: tun %s: %s\n",
devices.device_num, tapif, arg);
}
-
-/* Our block (disk) device should be really simple: the Guest asks for a block
- * number and we read or write that position in the file. Unfortunately, that
- * was amazingly slow: the Guest waits until the read is finished before
- * running anything else, even if it could have been doing useful work.
- *
- * We could use async I/O, except it's reputed to suck so hard that characters
- * actually go missing from your code when you try to use it.
- *
- * So we farm the I/O out to thread, and communicate with it via a pipe. */
+/*:*/
/* This hangs off device->priv. */
-struct vblk_info
-{
+struct vblk_info {
/* The size of the file. */
off64_t len;
/* The file descriptor for the file. */
int fd;
- /* IO thread listens on this file descriptor [0]. */
- int workpipe[2];
-
- /* IO thread writes to this file descriptor to mark it done, then
- * Launcher triggers interrupt to Guest. */
- int done_fd;
};
/*L:210
* The Disk
*
- * Remember that the block device is handled by a separate I/O thread. We head
- * straight into the core of that thread here:
+ * The disk only has one virtqueue, so it only has one thread. It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
*/
static void blk_request(struct virtqueue *vq)
{
@@ -1406,47 +1599,64 @@
struct iovec iov[vq->vring.num];
off64_t off;
- /* Get the next request. */
+ /*
+ * Get the next request, where we normally wait. It triggers the
+ * interrupt to acknowledge previously serviced requests (if any).
+ */
head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
- /* Every block request should contain at least one output buffer
+ /*
+ * Every block request should contain at least one output buffer
* (detailing the location on disk and the type of request) and one
- * input buffer (to hold the result). */
+ * input buffer (to hold the result).
+ */
if (out_num == 0 || in_num == 0)
errx(1, "Bad virtblk cmd %u out=%u in=%u",
head, out_num, in_num);
out = convert(&iov[0], struct virtio_blk_outhdr);
in = convert(&iov[out_num+in_num-1], u8);
+ /*
+ * For historical reasons, block operations are expressed in 512 byte
+ * "sectors".
+ */
off = out->sector * 512;
- /* The block device implements "barriers", where the Guest indicates
+ /*
+ * The block device implements "barriers", where the Guest indicates
* that it wants all previous writes to occur before this write. We
* don't have a way of asking our kernel to do a barrier, so we just
- * synchronize all the data in the file. Pretty poor, no? */
+ * synchronize all the data in the file. Pretty poor, no?
+ */
if (out->type & VIRTIO_BLK_T_BARRIER)
fdatasync(vblk->fd);
- /* In general the virtio block driver is allowed to try SCSI commands.
- * It'd be nice if we supported eject, for example, but we don't. */
+ /*
+ * In general the virtio block driver is allowed to try SCSI commands.
+ * It'd be nice if we supported eject, for example, but we don't.
+ */
if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
fprintf(stderr, "Scsi commands unsupported\n");
*in = VIRTIO_BLK_S_UNSUPP;
wlen = sizeof(*in);
} else if (out->type & VIRTIO_BLK_T_OUT) {
- /* Write */
-
- /* Move to the right location in the block file. This can fail
- * if they try to write past end. */
+ /*
+ * Write
+ *
+ * Move to the right location in the block file. This can fail
+ * if they try to write past end.
+ */
if (lseek64(vblk->fd, off, SEEK_SET) != off)
err(1, "Bad seek to sector %llu", out->sector);
ret = writev(vblk->fd, iov+1, out_num-1);
verbose("WRITE to sector %llu: %i\n", out->sector, ret);
- /* Grr... Now we know how long the descriptor they sent was, we
+ /*
+ * Grr... Now we know how long the descriptor they sent was, we
* make sure they didn't try to write over the end of the block
- * file (possibly extending it). */
+ * file (possibly extending it).
+ */
if (ret > 0 && off + ret > vblk->len) {
/* Trim it back to the correct length */
ftruncate64(vblk->fd, vblk->len);
@@ -1456,10 +1666,12 @@
wlen = sizeof(*in);
*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
} else {
- /* Read */
-
- /* Move to the right location in the block file. This can fail
- * if they try to read past end. */
+ /*
+ * Read
+ *
+ * Move to the right location in the block file. This can fail
+ * if they try to read past end.
+ */
if (lseek64(vblk->fd, off, SEEK_SET) != off)
err(1, "Bad seek to sector %llu", out->sector);
@@ -1474,13 +1686,16 @@
}
}
- /* OK, so we noted that it was pretty poor to use an fdatasync as a
+ /*
+ * OK, so we noted that it was pretty poor to use an fdatasync as a
* barrier. But Christoph Hellwig points out that we need a sync
* *afterwards* as well: "Barriers specify no reordering to the front
- * or the back." And Jens Axboe confirmed it, so here we are: */
+ * or the back." And Jens Axboe confirmed it, so here we are:
+ */
if (out->type & VIRTIO_BLK_T_BARRIER)
fdatasync(vblk->fd);
+ /* Finished that request. */
add_used(vq, head, wlen);
}
@@ -1491,7 +1706,7 @@
struct vblk_info *vblk;
struct virtio_blk_config conf;
- /* The device responds to return from I/O thread. */
+ /* Creat the device. */
dev = new_device("block", VIRTIO_ID_BLOCK);
/* The device has one virtqueue, where the Guest places requests. */
@@ -1510,27 +1725,32 @@
/* Tell Guest how many sectors this device has. */
conf.capacity = cpu_to_le64(vblk->len / 512);
- /* Tell Guest not to put in too many descriptors at once: two are used
- * for the in and out elements. */
+ /*
+ * Tell Guest not to put in too many descriptors at once: two are used
+ * for the in and out elements.
+ */
add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
- set_config(dev, sizeof(conf), &conf);
+ /* Don't try to put whole struct: we have 8 bit limit. */
+ set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
verbose("device %u: virtblock %llu sectors\n",
++devices.device_num, le64_to_cpu(conf.capacity));
}
-struct rng_info {
- int rfd;
-};
-
-/* Our random number generator device reads from /dev/random into the Guest's
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
* input buffers. The usual case is that the Guest doesn't want random numbers
* and so has no buffers although /dev/random is still readable, whereas
* console is the reverse.
*
- * The same logic applies, however. */
+ * The same logic applies, however.
+ */
+struct rng_info {
+ int rfd;
+};
+
static void rng_input(struct virtqueue *vq)
{
int len;
@@ -1543,9 +1763,10 @@
if (out_num)
errx(1, "Output buffers in rng?");
- /* This is why we convert to iovecs: the readv() call uses them, and so
- * it reads straight into the Guest's buffer. We loop to make sure we
- * fill it. */
+ /*
+ * Just like the console write, we loop to cover the whole iovec.
+ * In this case, short reads actually happen quite a bit.
+ */
while (!iov_empty(iov, in_num)) {
len = readv(rng_info->rfd, iov, in_num);
if (len <= 0)
@@ -1558,15 +1779,18 @@
add_used(vq, head, totlen);
}
-/* And this creates a "hardware" random number device for the Guest. */
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
static void setup_rng(void)
{
struct device *dev;
struct rng_info *rng_info = malloc(sizeof(*rng_info));
+ /* Our device's privat info simply contains the /dev/random fd. */
rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
- /* The device responds to return from I/O thread. */
+ /* Create the new device. */
dev = new_device("rng", VIRTIO_ID_RNG);
dev->priv = rng_info;
@@ -1582,8 +1806,10 @@
{
unsigned int i;
- /* Since we don't track all open fds, we simply close everything beyond
- * stderr. */
+ /*
+ * Since we don't track all open fds, we simply close everything beyond
+ * stderr.
+ */
for (i = 3; i < FD_SETSIZE; i++)
close(i);
@@ -1594,8 +1820,10 @@
err(1, "Could not exec %s", main_args[0]);
}
-/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest. */
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
static void __attribute__((noreturn)) run_guest(void)
{
for (;;) {
@@ -1630,7 +1858,7 @@
*
* Are you ready? Take a deep breath and join me in the core of the Host, in
* "make Host".
- :*/
+:*/
static struct option opts[] = {
{ "verbose", 0, NULL, 'v' },
@@ -1651,8 +1879,7 @@
/*L:105 The main routine is where the real work begins: */
int main(int argc, char *argv[])
{
- /* Memory, top-level pagetable, code startpoint and size of the
- * (optional) initrd. */
+ /* Memory, code startpoint and size of the (optional) initrd. */
unsigned long mem = 0, start, initrd_size = 0;
/* Two temporaries. */
int i, c;
@@ -1664,24 +1891,32 @@
/* Save the args: we "reboot" by execing ourselves again. */
main_args = argv;
- /* First we initialize the device list. We keep a pointer to the last
+ /*
+ * First we initialize the device list. We keep a pointer to the last
* device, and the next interrupt number to use for devices (1:
- * remember that 0 is used by the timer). */
+ * remember that 0 is used by the timer).
+ */
devices.lastdev = NULL;
devices.next_irq = 1;
+ /* We're CPU 0. In fact, that's the only CPU possible right now. */
cpu_id = 0;
- /* We need to know how much memory so we can set up the device
+
+ /*
+ * We need to know how much memory so we can set up the device
* descriptor and memory pages for the devices as we parse the command
* line. So we quickly look through the arguments to find the amount
- * of memory now. */
+ * of memory now.
+ */
for (i = 1; i < argc; i++) {
if (argv[i][0] != '-') {
mem = atoi(argv[i]) * 1024 * 1024;
- /* We start by mapping anonymous pages over all of
+ /*
+ * We start by mapping anonymous pages over all of
* guest-physical memory range. This fills it with 0,
* and ensures that the Guest won't be killed when it
- * tries to access it. */
+ * tries to access it.
+ */
guest_base = map_zeroed_pages(mem / getpagesize()
+ DEVICE_PAGES);
guest_limit = mem;
@@ -1714,8 +1949,10 @@
usage();
}
}
- /* After the other arguments we expect memory and kernel image name,
- * followed by command line arguments for the kernel. */
+ /*
+ * After the other arguments we expect memory and kernel image name,
+ * followed by command line arguments for the kernel.
+ */
if (optind + 2 > argc)
usage();
@@ -1733,20 +1970,26 @@
/* Map the initrd image if requested (at top of physical memory) */
if (initrd_name) {
initrd_size = load_initrd(initrd_name, mem);
- /* These are the location in the Linux boot header where the
- * start and size of the initrd are expected to be found. */
+ /*
+ * These are the location in the Linux boot header where the
+ * start and size of the initrd are expected to be found.
+ */
boot->hdr.ramdisk_image = mem - initrd_size;
boot->hdr.ramdisk_size = initrd_size;
/* The bootloader type 0xFF means "unknown"; that's OK. */
boot->hdr.type_of_loader = 0xFF;
}
- /* The Linux boot header contains an "E820" memory map: ours is a
- * simple, single region. */
+ /*
+ * The Linux boot header contains an "E820" memory map: ours is a
+ * simple, single region.
+ */
boot->e820_entries = 1;
boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
- /* The boot header contains a command line pointer: we put the command
- * line after the boot header. */
+ /*
+ * The boot header contains a command line pointer: we put the command
+ * line after the boot header.
+ */
boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
/* We use a simple helper to copy the arguments separated by spaces. */
concat((char *)(boot + 1), argv+optind+2);
@@ -1760,11 +2003,13 @@
/* Tell the entry path not to try to reload segment registers. */
boot->hdr.loadflags |= KEEP_SEGMENTS;
- /* We tell the kernel to initialize the Guest: this returns the open
- * /dev/lguest file descriptor. */
+ /*
+ * We tell the kernel to initialize the Guest: this returns the open
+ * /dev/lguest file descriptor.
+ */
tell_kernel(start);
- /* Ensure that we terminate if a child dies. */
+ /* Ensure that we terminate if a device-servicing child dies. */
signal(SIGCHLD, kill_launcher);
/* If we exit via err(), this kills all the threads, restores tty. */
diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index e20d913..abf768c 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -30,9 +30,9 @@
The validator tracks lock-class usage history into 4n + 1 separate state bits:
- 'ever held in STATE context'
-- 'ever head as readlock in STATE context'
-- 'ever head with STATE enabled'
-- 'ever head as readlock with STATE enabled'
+- 'ever held as readlock in STATE context'
+- 'ever held with STATE enabled'
+- 'ever held as readlock with STATE enabled'
Where STATE can be either one of (kernel/lockdep_states.h)
- hardirq
diff --git a/Documentation/networking/6pack.txt b/Documentation/networking/6pack.txt
index d0777a1..8f33942 100644
--- a/Documentation/networking/6pack.txt
+++ b/Documentation/networking/6pack.txt
@@ -1,7 +1,7 @@
This is the 6pack-mini-HOWTO, written by
Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
AMPR-net: dg3kq@db0pra.ampr.org
AX.25: dg3kq@db0ach.#nrw.deu.eu
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d8..79f533f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@
defined; this list will expand as more and more SOC-containing
platforms are moved over to use the flattened-device-tree model.
- a) PHY nodes
-
- Required properties:
-
- - device_type : Should be "ethernet-phy"
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
- - linux,phandle : phandle for this node; likely referenced by an
- ethernet controller node.
-
-
- Example:
-
- ethernet-phy@0 {
- linux,phandle = <2452000>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
-
-
- b) Interrupt controllers
-
- Some SOC devices contain interrupt controllers that are different
- from the standard Open PIC specification. The SOC device nodes for
- these types of controllers should be specified just like a standard
- OpenPIC controller. Sense and level information should be encoded
- as specified in section 2) of this chapter for each device that
- specifies an interrupt.
-
- Example :
-
- pic@40000 {
- linux,phandle = <40000>;
- interrupt-controller;
- #address-cells = <0>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- c) 4xx/Axon EMAC ethernet nodes
-
- The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
- the Axon bridge. To operate this needs to interact with a ths
- special McMAL DMA controller, and sometimes an RGMII or ZMII
- interface. In addition to the nodes and properties described
- below, the node for the OPB bus on which the EMAC sits must have a
- correct clock-frequency property.
-
- i) The EMAC node itself
-
- Required properties:
- - device_type : "network"
-
- - compatible : compatible list, contains 2 entries, first is
- "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
- 405gp, Axon) and second is either "ibm,emac" or
- "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
- "ibm,emac4"
- - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- - reg : <registers mapping>
- - local-mac-address : 6 bytes, MAC address
- - mal-device : phandle of the associated McMAL node
- - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
- with this EMAC
- - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
- with this EMAC
- - cell-index : 1 cell, hardware index of the EMAC cell on a given
- ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
- each Axon chip)
- - max-frame-size : 1 cell, maximum frame size supported in bytes
- - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048
- - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048.
- - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
- thresholds).
- For Axon, 0x00000010
- - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
- in bytes.
- For Axon, 0x00000100 (I think ...)
- - phy-mode : string, mode of operations of the PHY interface.
- Supported values are: "mii", "rmii", "smii", "rgmii",
- "tbi", "gmii", rtbi", "sgmii".
- For Axon on CAB, it is "rgmii"
- - mdio-device : 1 cell, required iff using shared MDIO registers
- (440EP). phandle of the EMAC to use to drive the
- MDIO lines for the PHY used by this EMAC.
- - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
- the ZMII device node
- - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
- channel or 0xffffffff if ZMII is only used for MDIO.
- - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
- of the RGMII device node.
- For Axon: phandle of plb5/plb4/opb/rgmii
- - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
- RGMII channel is used by this EMAC.
- Fox Axon: present, whatever value is appropriate for each
- EMAC, that is the content of the current (bogus) "phy-port"
- property.
-
- Optional properties:
- - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
- a search is performed.
- - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
- for, used if phy-address is absent. bit 0x00000001 is
- MDIO address 0.
- For Axon it can be absent, though my current driver
- doesn't handle phy-address yet so for now, keep
- 0x00ffffff in it.
- - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- rx-fifo-size). For Axon, either absent or 2048.
- - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- tx-fifo-size). For Axon, either absent or 2048.
- - tah-device : 1 cell, optional. If connected to a TAH engine for
- offload, phandle of the TAH device node.
- - tah-channel : 1 cell, optional. If appropriate, channel used on the
- TAH engine.
-
- Example:
-
- EMAC0: ethernet@40000800 {
- device_type = "network";
- compatible = "ibm,emac-440gp", "ibm,emac";
- interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
- local-mac-address = [00 04 AC E3 1B 1E];
- mal-device = <&MAL0>;
- mal-tx-channel = <0 1>;
- mal-rx-channel = <0>;
- cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
- phy-mode = "rmii";
- phy-map = <00000001>;
- zmii-device = <&ZMII0>;
- zmii-channel = <0>;
- };
-
- ii) McMAL node
-
- Required properties:
- - device_type : "dma-controller"
- - compatible : compatible list, containing 2 entries, first is
- "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
- emac) and the second is either "ibm,mcmal" or
- "ibm,mcmal2".
- For Axon, "ibm,mcmal-axon","ibm,mcmal2"
- - interrupts : <interrupt mapping for the MAL interrupts sources:
- 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
- For Axon: This is _different_ from the current
- firmware. We use the "delayed" interrupts for txeob
- and rxeob. Thus we end up with mapping those 5 MPIC
- interrupts, all level positive sensitive: 10, 11, 32,
- 33, 34 (in decimal)
- - dcr-reg : < DCR registers range >
- - dcr-parent : if needed for dcr-reg
- - num-tx-chans : 1 cell, number of Tx channels
- - num-rx-chans : 1 cell, number of Rx channels
-
- iii) ZMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,zmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,zmii".
- For Axon, there is no ZMII node.
- - reg : <registers mapping>
-
- iv) RGMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,rgmii".
- For Axon, "ibm,rgmii-axon","ibm,rgmii"
- - reg : <registers mapping>
- - revision : as provided by the RGMII new version register if
- available.
- For Axon: 0x0000012a
-
- d) Xilinx IP cores
-
- The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
- in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
- of standard device types (network, serial, etc.) and miscellaneous
- devices (gpio, LCD, spi, etc). Also, since these devices are
- implemented within the fpga fabric every instance of the device can be
- synthesised with different options that change the behaviour.
-
- Each IP-core has a set of parameters which the FPGA designer can use to
- control how the core is synthesized. Historically, the EDK tool would
- extract the device parameters relevant to device drivers and copy them
- into an 'xparameters.h' in the form of #define symbols. This tells the
- device drivers how the IP cores are configured, but it requres the kernel
- to be recompiled every time the FPGA bitstream is resynthesized.
-
- The new approach is to export the parameters into the device tree and
- generate a new device tree each time the FPGA bitstream changes. The
- parameters which used to be exported as #defines will now become
- properties of the device node. In general, device nodes for IP-cores
- will take the following form:
-
- (name): (generic-name)@(base-address) {
- compatible = "xlnx,(ip-core-name)-(HW_VER)"
- [, (list of compatible devices), ...];
- reg = <(baseaddr) (size)>;
- interrupt-parent = <&interrupt-controller-phandle>;
- interrupts = < ... >;
- xlnx,(parameter1) = "(string-value)";
- xlnx,(parameter2) = <(int-value)>;
- };
-
- (generic-name): an open firmware-style name that describes the
- generic class of device. Preferably, this is one word, such
- as 'serial' or 'ethernet'.
- (ip-core-name): the name of the ip block (given after the BEGIN
- directive in system.mhs). Should be in lowercase
- and all underscores '_' converted to dashes '-'.
- (name): is derived from the "PARAMETER INSTANCE" value.
- (parameter#): C_* parameters from system.mhs. The C_ prefix is
- dropped from the parameter name, the name is converted
- to lowercase and all underscore '_' characters are
- converted to dashes '-'.
- (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
- (HW_VER): from the HW_VER parameter.
- (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
- Typically, the compatible list will include the exact IP core version
- followed by an older IP core version which implements the same
- interface or any other device with the same interface.
-
- 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
- For example, the following block from system.mhs:
-
- BEGIN opb_uartlite
- PARAMETER INSTANCE = opb_uartlite_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BAUDRATE = 115200
- PARAMETER C_DATA_BITS = 8
- PARAMETER C_ODD_PARITY = 0
- PARAMETER C_USE_PARITY = 0
- PARAMETER C_CLK_FREQ = 50000000
- PARAMETER C_BASEADDR = 0xEC100000
- PARAMETER C_HIGHADDR = 0xEC10FFFF
- BUS_INTERFACE SOPB = opb_7
- PORT OPB_Clk = CLK_50MHz
- PORT Interrupt = opb_uartlite_0_Interrupt
- PORT RX = opb_uartlite_0_RX
- PORT TX = opb_uartlite_0_TX
- PORT OPB_Rst = sys_bus_reset_0
- END
-
- becomes the following device tree node:
-
- opb_uartlite_0: serial@ec100000 {
- device_type = "serial";
- compatible = "xlnx,opb-uartlite-1.00.b";
- reg = <ec100000 10000>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <1 0>; // got this from the opb_intc parameters
- current-speed = <d#115200>; // standard serial device prop
- clock-frequency = <d#50000000>; // standard serial device prop
- xlnx,data-bits = <8>;
- xlnx,odd-parity = <0>;
- xlnx,use-parity = <0>;
- };
-
- Some IP cores actually implement 2 or more logical devices. In
- this case, the device should still describe the whole IP core with
- a single node and add a child node for each logical device. The
- ranges property can be used to translate from parent IP-core to the
- registers of each device. In addition, the parent node should be
- compatible with the bus type 'xlnx,compound', and should contain
- #address-cells and #size-cells, as with any other bus. (Note: this
- makes the assumption that both logical devices have the same bus
- binding. If this is not true, then separate nodes should be used
- for each logical device). The 'cell-index' property can be used to
- enumerate logical devices within an IP core. For example, the
- following is the system.mhs entry for the dual ps2 controller found
- on the ml403 reference design.
-
- BEGIN opb_ps2_dual_ref
- PARAMETER INSTANCE = opb_ps2_dual_ref_0
- PARAMETER HW_VER = 1.00.a
- PARAMETER C_BASEADDR = 0xA9000000
- PARAMETER C_HIGHADDR = 0xA9001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- PORT Sys_Intr1 = ps2_1_intr
- PORT Sys_Intr2 = ps2_2_intr
- PORT Clkin1 = ps2_clk_rx_1
- PORT Clkin2 = ps2_clk_rx_2
- PORT Clkpd1 = ps2_clk_tx_1
- PORT Clkpd2 = ps2_clk_tx_2
- PORT Rx1 = ps2_d_rx_1
- PORT Rx2 = ps2_d_rx_2
- PORT Txpd1 = ps2_d_tx_1
- PORT Txpd2 = ps2_d_tx_2
- END
-
- It would result in the following device tree nodes:
-
- opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,compound";
- ranges = <0 a9000000 2000>;
- // If this device had extra parameters, then they would
- // go here.
- ps2@0 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <0 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- ps2@1000 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <1000 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- };
-
- Also, the system.mhs file defines bus attachments from the processor
- to the devices. The device tree structure should reflect the bus
- attachments. Again an example; this system.mhs fragment:
-
- BEGIN ppc405_virtex4
- PARAMETER INSTANCE = ppc405_0
- PARAMETER HW_VER = 1.01.a
- BUS_INTERFACE DPLB = plb_v34_0
- BUS_INTERFACE IPLB = plb_v34_0
- END
-
- BEGIN opb_intc
- PARAMETER INSTANCE = opb_intc_0
- PARAMETER HW_VER = 1.00.c
- PARAMETER C_BASEADDR = 0xD1000FC0
- PARAMETER C_HIGHADDR = 0xD1000FDF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN opb_uart16550
- PARAMETER INSTANCE = opb_uart16550_0
- PARAMETER HW_VER = 1.00.d
- PARAMETER C_BASEADDR = 0xa0000000
- PARAMETER C_HIGHADDR = 0xa0001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN plb_v34
- PARAMETER INSTANCE = plb_v34_0
- PARAMETER HW_VER = 1.02.a
- END
-
- BEGIN plb_bram_if_cntlr
- PARAMETER INSTANCE = plb_bram_if_cntlr_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BASEADDR = 0xFFFF0000
- PARAMETER C_HIGHADDR = 0xFFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- END
-
- BEGIN plb2opb_bridge
- PARAMETER INSTANCE = plb2opb_bridge_0
- PARAMETER HW_VER = 1.01.a
- PARAMETER C_RNG0_BASEADDR = 0x20000000
- PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
- PARAMETER C_RNG1_BASEADDR = 0x60000000
- PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
- PARAMETER C_RNG2_BASEADDR = 0x80000000
- PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
- PARAMETER C_RNG3_BASEADDR = 0xC0000000
- PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- BUS_INTERFACE MOPB = opb_v20_0
- END
-
- Gives this device tree (some properties removed for clarity):
-
- plb@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,plb-v34-1.02.a";
- device_type = "ibm,plb";
- ranges; // 1:1 translation
-
- plb_bram_if_cntrl_0: bram@ffff0000 {
- reg = <ffff0000 10000>;
- }
-
- opb@20000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <20000000 20000000 20000000
- 60000000 60000000 20000000
- 80000000 80000000 40000000
- c0000000 c0000000 20000000>;
-
- opb_uart16550_0: serial@a0000000 {
- reg = <a00000000 2000>;
- };
-
- opb_intc_0: interrupt-controller@d1000fc0 {
- reg = <d1000fc0 20>;
- };
- };
- };
-
- That covers the general approach to binding xilinx IP cores into the
- device tree. The following are bindings for specific devices:
-
- i) Xilinx ML300 Framebuffer
-
- Simple framebuffer device from the ML300 reference design (also on the
- ML403 reference design as well as others).
-
- Optional properties:
- - resolution = <xres yres> : pixel resolution of framebuffer. Some
- implementations use a different resolution.
- Default is <d#640 d#480>
- - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
- Default is <d#1024 d#480>.
- - rotate-display (empty) : rotate display 180 degrees.
-
- ii) Xilinx SystemACE
-
- The Xilinx SystemACE device is used to program FPGAs from an FPGA
- bitstream stored on a CF card. It can also be used as a generic CF
- interface device.
-
- Optional properties:
- - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
- iii) Xilinx EMAC and Xilinx TEMAC
-
- Xilinx Ethernet devices. In addition to general xilinx properties
- listed above, nodes for these devices should include a phy-handle
- property, and may include other common network device properties
- like local-mac-address.
-
- iv) Xilinx Uartlite
-
- Xilinx uartlite devices are simple fixed speed serial ports.
-
- Required properties:
- - current-speed : Baud rate of uartlite
-
- v) Xilinx hwicap
-
- Xilinx hwicap devices provide access to the configuration logic
- of the FPGA through the Internal Configuration Access Port
- (ICAP). The ICAP enables partial reconfiguration of the FPGA,
- readback of the configuration information, and some control over
- 'warm boots' of the FPGA fabric.
-
- Required properties:
- - xlnx,family : The family of the FPGA, necessary since the
- capabilities of the underlying ICAP hardware
- differ between different families. May be
- 'virtex2p', 'virtex4', or 'virtex5'.
-
- vi) Xilinx Uart 16550
-
- Xilinx UART 16550 devices are very similar to the NS16550 but with
- different register spacing and an offset from the base address.
-
- Required properties:
- - clock-frequency : Frequency of the clock input
- - reg-offset : A value of 3 is required
- - reg-shift : A value of 2 is required
-
- e) USB EHCI controllers
-
- Required properties:
- - compatible : should be "usb-ehci".
- - reg : should contain at least address and length of the standard EHCI
- register set for the device. Optional platform-dependent registers
- (debug-port or other) can be also specified here, but only after
- definition of standard EHCI registers.
- - interrupts : one EHCI interrupt should be described here.
- If device registers are implemented in big endian mode, the device
- node should have "big-endian-regs" property.
- If controller implementation operates with big endian descriptors,
- "big-endian-desc" property should be specified.
- If both big endian registers and descriptors are used by the controller
- implementation, "big-endian" property can be specified instead of having
- both "big-endian-regs" and "big-endian-desc".
-
- Example (Sequoia 440EPx):
- ehci@e0000300 {
- compatible = "ibm,usb-ehci-440epx", "usb-ehci";
- interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
- reg = <0 e0000300 90 0 e0000390 70>;
- big-endian;
- };
-
- f) MDIO on GPIOs
-
- Currently defined compatibles:
- - virtual,gpio-mdio
-
- MDC and MDIO lines connected to GPIO controllers are listed in the
- gpios property as described in section VIII.1 in the following order:
-
- MDC, MDIO.
-
- Example:
-
- mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qe_pio_a 11
- &qe_pio_c 6>;
- };
-
- g) SPI (Serial Peripheral Interface) busses
-
- SPI busses can be described with a node for the SPI master device
- and a set of child nodes for each SPI slave on the bus. For this
- discussion, it is assumed that the system's SPI controller is in
- SPI master mode. This binding does not describe SPI controllers
- in slave mode.
-
- The SPI master node requires the following properties:
- - #address-cells - number of cells required to define a chip select
- address on the SPI bus.
- - #size-cells - should be zero.
- - compatible - name of SPI bus controller following generic names
- recommended practice.
- No other properties are required in the SPI bus node. It is assumed
- that a driver for an SPI bus device will understand that it is an SPI bus.
- However, the binding does not attempt to define the specific method for
- assigning chip select numbers. Since SPI chip select configuration is
- flexible and non-standardized, it is left out of this binding with the
- assumption that board specific platform code will be used to manage
- chip selects. Individual drivers can define additional properties to
- support describing the chip select layout.
-
- SPI slave nodes must be children of the SPI master node and can
- contain the following properties.
- - reg - (required) chip select address of device.
- - compatible - (required) name of SPI device following generic names
- recommended practice
- - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- - spi-cpol - (optional) Empty property indicating device requires
- inverse clock polarity (CPOL) mode
- - spi-cpha - (optional) Empty property indicating device requires
- shifted clock phase (CPHA) mode
- - spi-cs-high - (optional) Empty property indicating device requires
- chip select active high
-
- SPI example for an MPC5200 SPI bus:
- spi@f00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
-
- ethernet-switch@0 {
- compatible = "micrel,ks8995m";
- spi-max-frequency = <1000000>;
- reg = <0>;
- };
-
- codec@1 {
- compatible = "ti,tlv320aic26";
- spi-max-frequency = <100000>;
- reg = <1>;
- };
- };
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system. In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains. Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
- This node is used to represent the system-controller and must be
- present when the system uses a system controller chip. The top-level
- system-controller node contains information that is global to all
- devices within the system controller chip. The node name begins
- with "system-controller" followed by the unit address, which is
- the base address of the memory-mapped register set for the system
- controller chip.
-
- Required properties:
-
- - ranges : Describes the translation of system controller addresses
- for memory mapped registers.
- - clock-frequency: Contains the main clock frequency for the system
- controller chip.
- - reg : This property defines the address and size of the
- memory-mapped registers contained within the system controller
- chip. The address specified in the "reg" property should match
- the unit address of the system-controller node.
- - #address-cells : Address representation for system controller
- devices. This field represents the number of cells needed to
- represent the address of the memory-mapped registers of devices
- within the system controller chip.
- - #size-cells : Size representation for for the memory-mapped
- registers within the system controller chip.
- - #interrupt-cells : Defines the width of cells used to represent
- interrupts.
-
- Optional properties:
-
- - model : The specific model of the system controller chip. Such
- as, "mv64360", "mv64460", or "mv64560".
- - compatible : A string identifying the compatibility identifiers
- of the system controller chip.
-
- The system-controller node contains child nodes for each system
- controller device that the platform uses. Nodes should not be created
- for devices which exist on the system controller chip but are not used
-
- Example Marvell Discovery mv64360 system-controller node:
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- [ child node definitions... ]
- }
-
-2) Child nodes of /system-controller
-
- a) Marvell Discovery MDIO bus
-
- The MDIO is a bus to which the PHY devices are connected. For each
- device that exists on this bus, a child node should be created. See
- the definition of the PHY node below for an example of how to define
- a PHY.
-
- Required properties:
- - #address-cells : Should be <1>
- - #size-cells : Should be <0>
- - device_type : Should be "mdio"
- - compatible : Should be "marvell,mv64360-mdio"
-
- Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "mdio";
- compatible = "marvell,mv64360-mdio";
-
- ethernet-phy@0 {
- ......
- };
- };
-
-
- b) Marvell Discovery ethernet controller
-
- The Discover ethernet controller is described with two levels
- of nodes. The first level describes an ethernet silicon block
- and the second level describes up to 3 ethernet nodes within
- that block. The reason for the multiple levels is that the
- registers for the node are interleaved within a single set
- of registers. The "ethernet-block" level describes the
- shared register set, and the "ethernet" nodes describe ethernet
- port-specific properties.
-
- Ethernet block node
-
- Required properties:
- - #address-cells : <1>
- - #size-cells : <0>
- - compatible : "marvell,mv64360-eth-block"
- - reg : Offset and length of the register set for this block
-
- Example Discovery Ethernet block node:
- ethernet-block@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-block";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- .......
- };
- };
-
- Ethernet port node
-
- Required properties:
- - device_type : Should be "network".
- - compatible : Should be "marvell,mv64360-eth".
- - reg : Should be <0>, <1>, or <2>, according to which registers
- within the silicon block the device uses.
- - interrupts : <a> where a is the interrupt number for the port.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
- - phy : the phandle for the PHY connected to this ethernet
- controller.
- - local-mac-address : 6 bytes, MAC address
-
- Example Discovery Ethernet port node:
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
-
-
- c) Marvell Discovery PHY nodes
-
- Required properties:
- - device_type : Should be "ethernet-phy"
- - interrupts : <a> where a is the interrupt number for this phy.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
-
- Example Discovery PHY node:
- ethernet-phy@1 {
- device_type = "ethernet-phy";
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
-
-
- d) Marvell Discovery SDMA nodes
-
- Represent DMA hardware associated with the MPSC (multiprotocol
- serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-sdma"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the DMA
- device.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SDMA node:
- sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
-
- e) Marvell Discovery BRG nodes
-
- Represent baud rate generator hardware associated with the MPSC
- (multiprotocol serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-brg"
- - reg : Offset and length of the register set for this device
- - clock-src : A value from 0 to 15 which selects the clock
- source for the baud rate generator. This value corresponds
- to the CLKS value in the BRGx configuration register. See
- the mv64x60 User's Manual.
- - clock-frequence : The frequency (in Hz) of the baud rate
- generator's input clock.
- - current-speed : The current speed setting (presumably by
- firmware) of the baud rate generator.
-
- Example Discovery BRG node:
- brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
-
- f) Marvell Discovery CUNIT nodes
-
- Represent the Serial Communications Unit device hardware.
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
-
- g) Marvell Discovery MPSCROUTING nodes
-
- Represent the Discovery's MPSC routing hardware
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- mpscrouting@b500 {
- reg = <0xb400 0xc>;
- };
-
-
- h) Marvell Discovery MPSCINTR nodes
-
- Represent the Discovery's MPSC DMA interrupt hardware registers
- (SDMA cause and mask registers).
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPSCINTR node:
- mpsintr@b800 {
- reg = <0xb800 0x100>;
- };
-
-
- i) Marvell Discovery MPSC nodes
-
- Represent the Discovery's MPSC (Multiprotocol Serial Controller)
- serial port.
-
- Required properties:
- - device_type : "serial"
- - compatible : "marvell,mv64360-mpsc"
- - reg : Offset and length of the register set for this device
- - sdma : the phandle for the SDMA node used by this port
- - brg : the phandle for the BRG node used by this port
- - cunit : the phandle for the CUNIT node used by this port
- - mpscrouting : the phandle for the MPSCROUTING node used by this port
- - mpscintr : the phandle for the MPSCINTR node used by this port
- - cell-index : the hardware index of this cell in the MPSC core
- - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
- register
- - interrupts : <a> where a is the interrupt number for the MPSC.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery MPSCINTR node:
- mpsc@8000 {
- device_type = "serial";
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- max_idle = <40>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
-
- j) Marvell Discovery Watch Dog Timer nodes
-
- Represent the Discovery's watchdog timer hardware
-
- Required properties:
- - compatible : "marvell,mv64360-wdt"
- - reg : Offset and length of the register set for this device
-
- Example Discovery Watch Dog Timer node:
- wdt@b410 {
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
-
- k) Marvell Discovery I2C nodes
-
- Represent the Discovery's I2C hardware
-
- Required properties:
- - device_type : "i2c"
- - compatible : "marvell,mv64360-i2c"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the I2C.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery I2C node:
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
-
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
- Represent the Discovery's PIC hardware
-
- Required properties:
- - #interrupt-cells : <1>
- - #address-cells : <0>
- - compatible : "marvell,mv64360-pic"
- - reg : Offset and length of the register set for this device
- - interrupt-controller
-
- Example Discovery PIC node:
- pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
-
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
- Represent the Discovery's MPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-mpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPP node:
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
-
- n) Marvell Discovery GPP (General Purpose Pins) nodes
-
- Represent the Discovery's GPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-gpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery GPP node:
- gpp@f000 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
-
- o) Marvell Discovery PCI host bridge node
-
- Represents the Discovery's PCI host bridge device. The properties
- for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
- 1275-1994. A typical value for the compatible property is
- "marvell,mv64360-pci".
-
- Example Discovery PCI host bridge node
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
-
- p) Marvell Discovery CPU Error nodes
-
- Represent the Discovery's CPU error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-cpu-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery CPU Error node:
- cpu-error@0070 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
-
- q) Marvell Discovery SRAM Controller nodes
-
- Represent the Discovery's SRAM controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-sram-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SRAM Controller node:
- sram-ctrl@0380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
-
- r) Marvell Discovery PCI Error Handler nodes
-
- Represent the Discovery's PCI error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-pci-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery PCI Error Handler node:
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
-
- s) Marvell Discovery Memory Controller nodes
-
- Represent the Discovery's memory controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-mem-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery Memory Controller node:
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
- &gpio-controller2-phandle gpio2-specifier
- 0 /* holes are permitted, means no GPIO 3 */
- &gpio-controller4-phandle gpio4-specifier
- ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
- node {
- gpios = <&qe_pio_e 18 0>;
- };
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
- qe_pio_a: gpio-controller@1400 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
- reg = <0x1400 0x18>;
- gpio-controller;
- };
-
- qe_pio_e: gpio-controller@1460 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
- reg = <0x1460 0x18>;
- gpio-controller;
- };
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
===================================================================
Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 0000000..2161334a
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+ 4xx/Axon EMAC ethernet nodes
+
+ The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+ the Axon bridge. To operate this needs to interact with a ths
+ special McMAL DMA controller, and sometimes an RGMII or ZMII
+ interface. In addition to the nodes and properties described
+ below, the node for the OPB bus on which the EMAC sits must have a
+ correct clock-frequency property.
+
+ i) The EMAC node itself
+
+ Required properties:
+ - device_type : "network"
+
+ - compatible : compatible list, contains 2 entries, first is
+ "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+ 405gp, Axon) and second is either "ibm,emac" or
+ "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
+ "ibm,emac4"
+ - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
+ - interrupt-parent : optional, if needed for interrupt mapping
+ - reg : <registers mapping>
+ - local-mac-address : 6 bytes, MAC address
+ - mal-device : phandle of the associated McMAL node
+ - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
+ with this EMAC
+ - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
+ with this EMAC
+ - cell-index : 1 cell, hardware index of the EMAC cell on a given
+ ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+ each Axon chip)
+ - max-frame-size : 1 cell, maximum frame size supported in bytes
+ - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048
+ - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048.
+ - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
+ thresholds).
+ For Axon, 0x00000010
+ - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
+ in bytes.
+ For Axon, 0x00000100 (I think ...)
+ - phy-mode : string, mode of operations of the PHY interface.
+ Supported values are: "mii", "rmii", "smii", "rgmii",
+ "tbi", "gmii", rtbi", "sgmii".
+ For Axon on CAB, it is "rgmii"
+ - mdio-device : 1 cell, required iff using shared MDIO registers
+ (440EP). phandle of the EMAC to use to drive the
+ MDIO lines for the PHY used by this EMAC.
+ - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
+ the ZMII device node
+ - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
+ channel or 0xffffffff if ZMII is only used for MDIO.
+ - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
+ of the RGMII device node.
+ For Axon: phandle of plb5/plb4/opb/rgmii
+ - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
+ RGMII channel is used by this EMAC.
+ Fox Axon: present, whatever value is appropriate for each
+ EMAC, that is the content of the current (bogus) "phy-port"
+ property.
+
+ Optional properties:
+ - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
+ a search is performed.
+ - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
+ for, used if phy-address is absent. bit 0x00000001 is
+ MDIO address 0.
+ For Axon it can be absent, though my current driver
+ doesn't handle phy-address yet so for now, keep
+ 0x00ffffff in it.
+ - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ rx-fifo-size). For Axon, either absent or 2048.
+ - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ tx-fifo-size). For Axon, either absent or 2048.
+ - tah-device : 1 cell, optional. If connected to a TAH engine for
+ offload, phandle of the TAH device node.
+ - tah-channel : 1 cell, optional. If appropriate, channel used on the
+ TAH engine.
+
+ Example:
+
+ EMAC0: ethernet@40000800 {
+ device_type = "network";
+ compatible = "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <40000800 70>;
+ local-mac-address = [00 04 AC E3 1B 1E];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ ii) McMAL node
+
+ Required properties:
+ - device_type : "dma-controller"
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+ emac) and the second is either "ibm,mcmal" or
+ "ibm,mcmal2".
+ For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+ - interrupts : <interrupt mapping for the MAL interrupts sources:
+ 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+ For Axon: This is _different_ from the current
+ firmware. We use the "delayed" interrupts for txeob
+ and rxeob. Thus we end up with mapping those 5 MPIC
+ interrupts, all level positive sensitive: 10, 11, 32,
+ 33, 34 (in decimal)
+ - dcr-reg : < DCR registers range >
+ - dcr-parent : if needed for dcr-reg
+ - num-tx-chans : 1 cell, number of Tx channels
+ - num-rx-chans : 1 cell, number of Rx channels
+
+ iii) ZMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,zmii".
+ For Axon, there is no ZMII node.
+ - reg : <registers mapping>
+
+ iv) RGMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,rgmii".
+ For Axon, "ibm,rgmii-axon","ibm,rgmii"
+ - reg : <registers mapping>
+ - revision : as provided by the RGMII new version register if
+ available.
+ For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 0000000..edaa84d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+ &gpio-controller2-phandle gpio2-specifier
+ 0 /* holes are permitted, means no GPIO 3 */
+ &gpio-controller4-phandle gpio4-specifier
+ ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+ node {
+ gpios = <&qe_pio_e 18 0>;
+ };
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index 4fe14de..064db92 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -16,10 +16,17 @@
string defining the trigger assigned to the LED. Current triggers are:
"backlight" - LED will act as a back-light, controlled by the framebuffer
system
- "default-on" - LED will turn on
+ "default-on" - LED will turn on, but see "default-state" below
"heartbeat" - LED "double" flashes at a load average based rate
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
+- default-state: (optional) The initial state of the LED. Valid
+ values are "on", "off", and "keep". If the LED is already on or off
+ and the default-state property is set the to same value, then no
+ glitch should be produced where the LED momentarily turns off (or
+ on). The "keep" setting will keep the LED at whatever its current
+ state is, without producing a glitch. The default is off if this
+ property is not present.
Examples:
@@ -30,14 +37,22 @@
gpios = <&mcu_pio 0 1>; /* Active low */
linux,default-trigger = "ide-disk";
};
+
+ fault {
+ gpios = <&mcu_pio 1 0>;
+ /* Keep LED on if BIOS detected hardware fault */
+ default-state = "keep";
+ };
};
run-control {
compatible = "gpio-leds";
red {
gpios = <&mpc8572 6 0>;
+ default-state = "off";
};
green {
gpios = <&mpc8572 7 0>;
+ default-state = "on";
};
}
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 0000000..bc954952
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qe_pio_a 11
+ &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 0000000..3708a2f
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system. In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains. Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+ This node is used to represent the system-controller and must be
+ present when the system uses a system controller chip. The top-level
+ system-controller node contains information that is global to all
+ devices within the system controller chip. The node name begins
+ with "system-controller" followed by the unit address, which is
+ the base address of the memory-mapped register set for the system
+ controller chip.
+
+ Required properties:
+
+ - ranges : Describes the translation of system controller addresses
+ for memory mapped registers.
+ - clock-frequency: Contains the main clock frequency for the system
+ controller chip.
+ - reg : This property defines the address and size of the
+ memory-mapped registers contained within the system controller
+ chip. The address specified in the "reg" property should match
+ the unit address of the system-controller node.
+ - #address-cells : Address representation for system controller
+ devices. This field represents the number of cells needed to
+ represent the address of the memory-mapped registers of devices
+ within the system controller chip.
+ - #size-cells : Size representation for for the memory-mapped
+ registers within the system controller chip.
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts.
+
+ Optional properties:
+
+ - model : The specific model of the system controller chip. Such
+ as, "mv64360", "mv64460", or "mv64560".
+ - compatible : A string identifying the compatibility identifiers
+ of the system controller chip.
+
+ The system-controller node contains child nodes for each system
+ controller device that the platform uses. Nodes should not be created
+ for devices which exist on the system controller chip but are not used
+
+ Example Marvell Discovery mv64360 system-controller node:
+
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+ [ child node definitions... ]
+ }
+
+2) Child nodes of /system-controller
+
+ a) Marvell Discovery MDIO bus
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - #address-cells : Should be <1>
+ - #size-cells : Should be <0>
+ - device_type : Should be "mdio"
+ - compatible : Should be "marvell,mv64360-mdio"
+
+ Example:
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64360-mdio";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Marvell Discovery ethernet controller
+
+ The Discover ethernet controller is described with two levels
+ of nodes. The first level describes an ethernet silicon block
+ and the second level describes up to 3 ethernet nodes within
+ that block. The reason for the multiple levels is that the
+ registers for the node are interleaved within a single set
+ of registers. The "ethernet-block" level describes the
+ shared register set, and the "ethernet" nodes describe ethernet
+ port-specific properties.
+
+ Ethernet block node
+
+ Required properties:
+ - #address-cells : <1>
+ - #size-cells : <0>
+ - compatible : "marvell,mv64360-eth-block"
+ - reg : Offset and length of the register set for this block
+
+ Example Discovery Ethernet block node:
+ ethernet-block@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-block";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
+ .......
+ };
+ };
+
+ Ethernet port node
+
+ Required properties:
+ - device_type : Should be "network".
+ - compatible : Should be "marvell,mv64360-eth".
+ - reg : Should be <0>, <1>, or <2>, according to which registers
+ within the silicon block the device uses.
+ - interrupts : <a> where a is the interrupt number for the port.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+ - phy : the phandle for the PHY connected to this ethernet
+ controller.
+ - local-mac-address : 6 bytes, MAC address
+
+ Example Discovery Ethernet port node:
+ ethernet@0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+
+
+ c) Marvell Discovery PHY nodes
+
+ Required properties:
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a> where a is the interrupt number for this phy.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+
+ Example Discovery PHY node:
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+
+
+ d) Marvell Discovery SDMA nodes
+
+ Represent DMA hardware associated with the MPSC (multiprotocol
+ serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-sdma"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the DMA
+ device.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SDMA node:
+ sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ e) Marvell Discovery BRG nodes
+
+ Represent baud rate generator hardware associated with the MPSC
+ (multiprotocol serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-brg"
+ - reg : Offset and length of the register set for this device
+ - clock-src : A value from 0 to 15 which selects the clock
+ source for the baud rate generator. This value corresponds
+ to the CLKS value in the BRGx configuration register. See
+ the mv64x60 User's Manual.
+ - clock-frequence : The frequency (in Hz) of the baud rate
+ generator's input clock.
+ - current-speed : The current speed setting (presumably by
+ firmware) of the baud rate generator.
+
+ Example Discovery BRG node:
+ brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
+ };
+
+
+ f) Marvell Discovery CUNIT nodes
+
+ Represent the Serial Communications Unit device hardware.
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ cunit@f200 {
+ reg = <0xf200 0x200>;
+ };
+
+
+ g) Marvell Discovery MPSCROUTING nodes
+
+ Represent the Discovery's MPSC routing hardware
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ mpscrouting@b500 {
+ reg = <0xb400 0xc>;
+ };
+
+
+ h) Marvell Discovery MPSCINTR nodes
+
+ Represent the Discovery's MPSC DMA interrupt hardware registers
+ (SDMA cause and mask registers).
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPSCINTR node:
+ mpsintr@b800 {
+ reg = <0xb800 0x100>;
+ };
+
+
+ i) Marvell Discovery MPSC nodes
+
+ Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+ serial port.
+
+ Required properties:
+ - device_type : "serial"
+ - compatible : "marvell,mv64360-mpsc"
+ - reg : Offset and length of the register set for this device
+ - sdma : the phandle for the SDMA node used by this port
+ - brg : the phandle for the BRG node used by this port
+ - cunit : the phandle for the CUNIT node used by this port
+ - mpscrouting : the phandle for the MPSCROUTING node used by this port
+ - mpscintr : the phandle for the MPSCINTR node used by this port
+ - cell-index : the hardware index of this cell in the MPSC core
+ - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+ register
+ - interrupts : <a> where a is the interrupt number for the MPSC.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery MPSCINTR node:
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ max_idle = <40>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ j) Marvell Discovery Watch Dog Timer nodes
+
+ Represent the Discovery's watchdog timer hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-wdt"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery Watch Dog Timer node:
+ wdt@b410 {
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+
+ k) Marvell Discovery I2C nodes
+
+ Represent the Discovery's I2C hardware
+
+ Required properties:
+ - device_type : "i2c"
+ - compatible : "marvell,mv64360-i2c"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the I2C.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery I2C node:
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+ Represent the Discovery's PIC hardware
+
+ Required properties:
+ - #interrupt-cells : <1>
+ - #address-cells : <0>
+ - compatible : "marvell,mv64360-pic"
+ - reg : Offset and length of the register set for this device
+ - interrupt-controller
+
+ Example Discovery PIC node:
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
+ interrupt-controller;
+ };
+
+
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+ Represent the Discovery's MPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-mpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPP node:
+ mpp@f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+ Represent the Discovery's GPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-gpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery GPP node:
+ gpp@f000 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+
+ o) Marvell Discovery PCI host bridge node
+
+ Represents the Discovery's PCI host bridge device. The properties
+ for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+ 1275-1994. A typical value for the compatible property is
+ "marvell,mv64360-pci".
+
+ Example Discovery PCI host bridge node
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
+
+ /* IDSEL 0x0b */
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
+
+ /* IDSEL 0x0c */
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
+
+ /* IDSEL 0x0d */
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
+ >;
+ };
+
+
+ p) Marvell Discovery CPU Error nodes
+
+ Represent the Discovery's CPU error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-cpu-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery CPU Error node:
+ cpu-error@0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ q) Marvell Discovery SRAM Controller nodes
+
+ Represent the Discovery's SRAM controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-sram-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SRAM Controller node:
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ r) Marvell Discovery PCI Error Handler nodes
+
+ Represent the Discovery's PCI error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-pci-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery PCI Error Handler node:
+ pci-error@1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ s) Marvell Discovery Memory Controller nodes
+
+ Represent the Discovery's memory controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-mem-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery Memory Controller node:
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 0000000..bb8c742
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle : phandle for this node; likely referenced by an
+ ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+ linux,phandle = <2452000>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 0000000..e782add
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus. For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode. This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells - number of cells required to define a chip select
+ address on the SPI bus.
+- #size-cells - should be zero.
+- compatible - name of SPI bus controller following generic names
+ recommended practice.
+No other properties are required in the SPI bus node. It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers. Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects. Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg - (required) chip select address of device.
+- compatible - (required) name of SPI device following generic names
+ recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol - (optional) Empty property indicating device requires
+ inverse clock polarity (CPOL) mode
+- spi-cpha - (optional) Empty property indicating device requires
+ shifted clock phase (CPHA) mode
+- spi-cs-high - (optional) Empty property indicating device requires
+ chip select active high
+
+SPI example for an MPC5200 SPI bus:
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 0000000..fa18612
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+ - compatible : should be "usb-ehci".
+ - reg : should contain at least address and length of the standard EHCI
+ register set for the device. Optional platform-dependent registers
+ (debug-port or other) can be also specified here, but only after
+ definition of standard EHCI registers.
+ - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+ ehci@e0000300 {
+ compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+ interrupt-parent = <&UIC0>;
+ interrupts = <1a 4>;
+ reg = <0 e0000300 90 0 e0000390 70>;
+ big-endian;
+ };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 0000000..80339fe
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+ d) Xilinx IP cores
+
+ The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+ in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
+ of standard device types (network, serial, etc.) and miscellaneous
+ devices (gpio, LCD, spi, etc). Also, since these devices are
+ implemented within the fpga fabric every instance of the device can be
+ synthesised with different options that change the behaviour.
+
+ Each IP-core has a set of parameters which the FPGA designer can use to
+ control how the core is synthesized. Historically, the EDK tool would
+ extract the device parameters relevant to device drivers and copy them
+ into an 'xparameters.h' in the form of #define symbols. This tells the
+ device drivers how the IP cores are configured, but it requres the kernel
+ to be recompiled every time the FPGA bitstream is resynthesized.
+
+ The new approach is to export the parameters into the device tree and
+ generate a new device tree each time the FPGA bitstream changes. The
+ parameters which used to be exported as #defines will now become
+ properties of the device node. In general, device nodes for IP-cores
+ will take the following form:
+
+ (name): (generic-name)@(base-address) {
+ compatible = "xlnx,(ip-core-name)-(HW_VER)"
+ [, (list of compatible devices), ...];
+ reg = <(baseaddr) (size)>;
+ interrupt-parent = <&interrupt-controller-phandle>;
+ interrupts = < ... >;
+ xlnx,(parameter1) = "(string-value)";
+ xlnx,(parameter2) = <(int-value)>;
+ };
+
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
+ (ip-core-name): the name of the ip block (given after the BEGIN
+ directive in system.mhs). Should be in lowercase
+ and all underscores '_' converted to dashes '-'.
+ (name): is derived from the "PARAMETER INSTANCE" value.
+ (parameter#): C_* parameters from system.mhs. The C_ prefix is
+ dropped from the parameter name, the name is converted
+ to lowercase and all underscore '_' characters are
+ converted to dashes '-'.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
+ (HW_VER): from the HW_VER parameter.
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+ Typically, the compatible list will include the exact IP core version
+ followed by an older IP core version which implements the same
+ interface or any other device with the same interface.
+
+ 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+ For example, the following block from system.mhs:
+
+ BEGIN opb_uartlite
+ PARAMETER INSTANCE = opb_uartlite_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 0
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0xEC100000
+ PARAMETER C_HIGHADDR = 0xEC10FFFF
+ BUS_INTERFACE SOPB = opb_7
+ PORT OPB_Clk = CLK_50MHz
+ PORT Interrupt = opb_uartlite_0_Interrupt
+ PORT RX = opb_uartlite_0_RX
+ PORT TX = opb_uartlite_0_TX
+ PORT OPB_Rst = sys_bus_reset_0
+ END
+
+ becomes the following device tree node:
+
+ opb_uartlite_0: serial@ec100000 {
+ device_type = "serial";
+ compatible = "xlnx,opb-uartlite-1.00.b";
+ reg = <ec100000 10000>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <1 0>; // got this from the opb_intc parameters
+ current-speed = <d#115200>; // standard serial device prop
+ clock-frequency = <d#50000000>; // standard serial device prop
+ xlnx,data-bits = <8>;
+ xlnx,odd-parity = <0>;
+ xlnx,use-parity = <0>;
+ };
+
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
+
+ BEGIN opb_ps2_dual_ref
+ PARAMETER INSTANCE = opb_ps2_dual_ref_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_BASEADDR = 0xA9000000
+ PARAMETER C_HIGHADDR = 0xA9001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ PORT Sys_Intr1 = ps2_1_intr
+ PORT Sys_Intr2 = ps2_2_intr
+ PORT Clkin1 = ps2_clk_rx_1
+ PORT Clkin2 = ps2_clk_rx_2
+ PORT Clkpd1 = ps2_clk_tx_1
+ PORT Clkpd2 = ps2_clk_tx_2
+ PORT Rx1 = ps2_d_rx_1
+ PORT Rx2 = ps2_d_rx_2
+ PORT Txpd1 = ps2_d_tx_1
+ PORT Txpd2 = ps2_d_tx_2
+ END
+
+ It would result in the following device tree nodes:
+
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges = <0 a9000000 2000>;
+ // If this device had extra parameters, then they would
+ // go here.
+ ps2@0 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <0 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ ps2@1000 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <1000 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ };
+
+ Also, the system.mhs file defines bus attachments from the processor
+ to the devices. The device tree structure should reflect the bus
+ attachments. Again an example; this system.mhs fragment:
+
+ BEGIN ppc405_virtex4
+ PARAMETER INSTANCE = ppc405_0
+ PARAMETER HW_VER = 1.01.a
+ BUS_INTERFACE DPLB = plb_v34_0
+ BUS_INTERFACE IPLB = plb_v34_0
+ END
+
+ BEGIN opb_intc
+ PARAMETER INSTANCE = opb_intc_0
+ PARAMETER HW_VER = 1.00.c
+ PARAMETER C_BASEADDR = 0xD1000FC0
+ PARAMETER C_HIGHADDR = 0xD1000FDF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN opb_uart16550
+ PARAMETER INSTANCE = opb_uart16550_0
+ PARAMETER HW_VER = 1.00.d
+ PARAMETER C_BASEADDR = 0xa0000000
+ PARAMETER C_HIGHADDR = 0xa0001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN plb_v34
+ PARAMETER INSTANCE = plb_v34_0
+ PARAMETER HW_VER = 1.02.a
+ END
+
+ BEGIN plb_bram_if_cntlr
+ PARAMETER INSTANCE = plb_bram_if_cntlr_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0xFFFF0000
+ PARAMETER C_HIGHADDR = 0xFFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ END
+
+ BEGIN plb2opb_bridge
+ PARAMETER INSTANCE = plb2opb_bridge_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_RNG0_BASEADDR = 0x20000000
+ PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+ PARAMETER C_RNG1_BASEADDR = 0x60000000
+ PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+ PARAMETER C_RNG2_BASEADDR = 0x80000000
+ PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+ PARAMETER C_RNG3_BASEADDR = 0xC0000000
+ PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ BUS_INTERFACE MOPB = opb_v20_0
+ END
+
+ Gives this device tree (some properties removed for clarity):
+
+ plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
+ device_type = "ibm,plb";
+ ranges; // 1:1 translation
+
+ plb_bram_if_cntrl_0: bram@ffff0000 {
+ reg = <ffff0000 10000>;
+ }
+
+ opb@20000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <20000000 20000000 20000000
+ 60000000 60000000 20000000
+ 80000000 80000000 40000000
+ c0000000 c0000000 20000000>;
+
+ opb_uart16550_0: serial@a0000000 {
+ reg = <a00000000 2000>;
+ };
+
+ opb_intc_0: interrupt-controller@d1000fc0 {
+ reg = <d1000fc0 20>;
+ };
+ };
+ };
+
+ That covers the general approach to binding xilinx IP cores into the
+ device tree. The following are bindings for specific devices:
+
+ i) Xilinx ML300 Framebuffer
+
+ Simple framebuffer device from the ML300 reference design (also on the
+ ML403 reference design as well as others).
+
+ Optional properties:
+ - resolution = <xres yres> : pixel resolution of framebuffer. Some
+ implementations use a different resolution.
+ Default is <d#640 d#480>
+ - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+ Default is <d#1024 d#480>.
+ - rotate-display (empty) : rotate display 180 degrees.
+
+ ii) Xilinx SystemACE
+
+ The Xilinx SystemACE device is used to program FPGAs from an FPGA
+ bitstream stored on a CF card. It can also be used as a generic CF
+ interface device.
+
+ Optional properties:
+ - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+ iii) Xilinx EMAC and Xilinx TEMAC
+
+ Xilinx Ethernet devices. In addition to general xilinx properties
+ listed above, nodes for these devices should include a phy-handle
+ property, and may include other common network device properties
+ like local-mac-address.
+
+ iv) Xilinx Uartlite
+
+ Xilinx uartlite devices are simple fixed speed serial ports.
+
+ Required properties:
+ - current-speed : Baud rate of uartlite
+
+ v) Xilinx hwicap
+
+ Xilinx hwicap devices provide access to the configuration logic
+ of the FPGA through the Internal Configuration Access Port
+ (ICAP). The ICAP enables partial reconfiguration of the FPGA,
+ readback of the configuration information, and some control over
+ 'warm boots' of the FPGA fabric.
+
+ Required properties:
+ - xlnx,family : The family of the FPGA, necessary since the
+ capabilities of the underlying ICAP hardware
+ differ between different families. May be
+ 'virtex2p', 'virtex4', or 'virtex5'.
+
+ vi) Xilinx Uart 16550
+
+ Xilinx UART 16550 devices are very similar to the NS16550 but with
+ different register spacing and an offset from the base address.
+
+ Required properties:
+ - clock-frequency : Frequency of the clock input
+ - reg-offset : A value of 3 is required
+ - reg-shift : A value of 2 is required
+
+
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 1df7f9c..86eabe6 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -73,7 +73,7 @@
realtime tasks have explicitly allocated the CPU time they need to perform
their tasks, buffer underruns in the graphics or audio can be eliminated.
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
lack an EDF scheduler to make non-uniform periods usable.
@@ -140,14 +140,15 @@
.o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
\Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
@@ -189,7 +190,7 @@
the biggest challenge as the current linux PI infrastructure is geared towards
the limited static priority levels 0-99. With deadline scheduling you need to
do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
This means the whole PI machinery will have to be reworked - and that is one of
the most complex pieces of code we have.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0d8d235..939a3dd 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -240,6 +240,7 @@
laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
ultra 2-channel with EAPD (Samsung Ultra tablet PC)
samsung 2-channel with EAPD (Samsung R65)
+ samsung-p50 2-channel with HP-automute (Samsung P50)
AD1988/AD1988B/AD1989A/AD1989B
==============================
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 381908d..719a819 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -101,6 +101,8 @@
bit 0 = Enable XRUN/jiffies debug messages
bit 1 = Show stack trace at XRUN / jiffies check
bit 2 = Enable additional jiffies check
+ bit 3 = Log hwptr update at each period interrupt
+ bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
When the bit 0 is set, the driver will show the messages to
kernel log when an xrun is detected. The debug message is
@@ -117,6 +119,9 @@
buggy) hardware that doesn't give smooth pointer updates.
This feature is enabled via the bit 2.
+ Bits 3 and 4 are for logging the hwptr records. Note that
+ these will give flood of kernel messages.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index cf0e3ce0..c1a5aad 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -99,11 +99,13 @@
{ "lsb", 0, 0, 'L' },
{ "cs-high", 0, 0, 'C' },
{ "3wire", 0, 0, '3' },
+ { "no-cs", 0, 0, 'N' },
+ { "ready", 0, 0, 'R' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
if (c == -1)
break;
@@ -139,6 +141,12 @@
case '3':
mode |= SPI_3WIRE;
break;
+ case 'N':
+ mode |= SPI_NO_CS;
+ break;
+ case 'R':
+ mode |= SPI_READY;
+ break;
default:
print_usage(argv[0]);
break;
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index cf42b82..d56a017 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -66,7 +66,8 @@
'b' - Will immediately reboot the system without syncing or unmounting
your disks.
-'c' - Will perform a kexec reboot in order to take a crashdump.
+'c' - Will perform a system crash by a NULL pointer dereference.
+ A crashdump will be taken if configured.
'd' - Shows all locks that are held.
@@ -141,8 +142,8 @@
re'B'oot is good when you're unable to shut down. But you should also 'S'ync
and 'U'mount first.
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
'S'ync is great when your system is locked up, it allows you to sync your
disks and will certainly lessen the chance of data loss and fscking. Note
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 873630e..68c236c 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -20,7 +20,7 @@
19 -> EM2860/SAA711X Reference Design (em2860)
20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002]
21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
23 -> Huaqi DLCW-130 (em2750)
24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112]
25 -> Gadmei UTV310 (em2820/em2840)
@@ -66,3 +66,4 @@
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]
70 -> Evga inDtube (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 2bcf788..573f95b 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -44,7 +44,9 @@
zc3xx 0458:700c Genius VideoCam V3
zc3xx 0458:700f Genius VideoCam Web V2
sonixj 0458:7025 Genius Eye 311Q
+sn9c20x 0458:7029 Genius Look 320s
sonixj 0458:702e Genius Slim 310 NB
+sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650)
sonixj 045e:00f5 MicroSoft VX3000
sonixj 045e:00f7 MicroSoft VX1000
ov519 045e:028c Micro$oft xbox cam
@@ -282,6 +284,28 @@
sonixj 0c45:613b Surfer SN-206
sonixj 0c45:613c Sonix Pccam168
sonixj 0c45:6143 Sonix Pccam168
+sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
+sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
+sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
+sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968)
+sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670)
+sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660)
+sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R)
+sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650)
+sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001)
+sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111)
+sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655)
+sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968)
+sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650)
+sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670)
+sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
+sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
+sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
sunplus 0d64:0303 Sunplus FashionCam DXG
etoms 102c:6151 Qcam Sangha CIF
etoms 102c:6251 Qcam xxxxxx VGA
@@ -290,6 +314,7 @@
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201)
pac207 145f:013a Trust WB-1300N
+sn9c20x 145f:013d Trust WB-3600R
vc032x 15b8:6001 HP 2.0 Megapixel
vc032x 15b8:6002 HP 2.0 Megapixel rz406aa
spca501 1776:501c Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@
spca508 8086:0110 Intel Easy PC Camera
spca500 8086:0630 Intel Pocket PC Camera
spca506 99fa:8988 Grandtec V.cap
+sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
spca561 abcd:cdee Petcam
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
index dbe3377..f37b46d 100644
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@@ -2,3 +2,5 @@
- this file
mtrr.txt
- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+ - why and how Linux kernel uses exception tables on x86
diff --git a/Documentation/exception.txt b/Documentation/x86/exception-tables.txt
similarity index 74%
rename from Documentation/exception.txt
rename to Documentation/x86/exception-tables.txt
index 2d5aded..32901aa 100644
--- a/Documentation/exception.txt
+++ b/Documentation/x86/exception-tables.txt
@@ -1,123 +1,123 @@
- Kernel level exception handling in Linux 2.1.8
+ Kernel level exception handling in Linux
Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
-When a process runs in kernel mode, it often has to access user
-mode memory whose address has been passed by an untrusted program.
+When a process runs in kernel mode, it often has to access user
+mode memory whose address has been passed by an untrusted program.
To protect itself the kernel has to verify this address.
-In older versions of Linux this was done with the
-int verify_area(int type, const void * addr, unsigned long size)
+In older versions of Linux this was done with the
+int verify_area(int type, const void * addr, unsigned long size)
function (which has since been replaced by access_ok()).
-This function verified that the memory area starting at address
+This function verified that the memory area starting at address
'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the
-virtual memory area (vma) that contained the address addr. In the
-normal case (correctly working program), this test was successful.
+in type (read or write). To do this, verify_read had to look up the
+virtual memory area (vma) that contained the address addr. In the
+normal case (correctly working program), this test was successful.
It only failed for a few buggy programs. In some kernel profiling
tests, this normally unneeded verification used up a considerable
amount of time.
-To overcome this situation, Linus decided to let the virtual memory
+To overcome this situation, Linus decided to let the virtual memory
hardware present in every Linux-capable CPU handle this test.
How does this work?
-Whenever the kernel tries to access an address that is currently not
-accessible, the CPU generates a page fault exception and calls the
-page fault handler
+Whenever the kernel tries to access an address that is currently not
+accessible, the CPU generates a page fault exception and calls the
+page fault handler
void do_page_fault(struct pt_regs *regs, unsigned long error_code)
-in arch/i386/mm/fault.c. The parameters on the stack are set up by
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
+regs is a pointer to the saved registers on the stack, error_code
contains a reason code for the exception.
-do_page_fault first obtains the unaccessible address from the CPU
-control register CR2. If the address is within the virtual address
-space of the process, the fault probably occurred, because the page
-was not swapped in, write protected or something similar. However,
-we are interested in the other case: the address is not valid, there
-is no vma that contains this address. In this case, the kernel jumps
-to the bad_area label.
+do_page_fault first obtains the unaccessible address from the CPU
+control register CR2. If the address is within the virtual address
+space of the process, the fault probably occurred, because the page
+was not swapped in, write protected or something similar. However,
+we are interested in the other case: the address is not valid, there
+is no vma that contains this address. In this case, the kernel jumps
+to the bad_area label.
-There it uses the address of the instruction that caused the exception
-(i.e. regs->eip) to find an address where the execution can continue
-(fixup). If this search is successful, the fault handler modifies the
-return address (again regs->eip) and returns. The execution will
+There it uses the address of the instruction that caused the exception
+(i.e. regs->eip) to find an address where the execution can continue
+(fixup). If this search is successful, the fault handler modifies the
+return address (again regs->eip) and returns. The execution will
continue at the address in fixup.
Where does fixup point to?
-Since we jump to the contents of fixup, fixup obviously points
-to executable code. This code is hidden inside the user access macros.
-I have picked the get_user macro defined in include/asm/uaccess.h as an
-example. The definition is somewhat hard to follow, so let's peek at
+Since we jump to the contents of fixup, fixup obviously points
+to executable code. This code is hidden inside the user access macros.
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+as an example. The definition is somewhat hard to follow, so let's peek at
the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
get_user(c, buf);
The preprocessor output (edited to become somewhat readable):
(
- {
- long __gu_err = - 14 , __gu_val = 0;
- const __typeof__(*( ( buf ) )) *__gu_addr = ((buf));
- if (((((0 + current_set[0])->tss.segment) == 0x18 ) ||
- (((sizeof(*(buf))) <= 0xC0000000UL) &&
- ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
+ {
+ long __gu_err = - 14 , __gu_val = 0;
+ const __typeof__(*( ( buf ) )) *__gu_addr = ((buf));
+ if (((((0 + current_set[0])->tss.segment) == 0x18 ) ||
+ (((sizeof(*(buf))) <= 0xC0000000UL) &&
+ ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
do {
- __gu_err = 0;
- switch ((sizeof(*(buf)))) {
- case 1:
- __asm__ __volatile__(
- "1: mov" "b" " %2,%" "b" "1\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %3,%0\n"
- " xor" "b" " %" "b" "1,%" "b" "1\n"
- " jmp 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,3b\n"
- ".text" : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
- ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )) ;
- break;
- case 2:
+ __gu_err = 0;
+ switch ((sizeof(*(buf)))) {
+ case 1:
__asm__ __volatile__(
- "1: mov" "w" " %2,%" "w" "1\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %3,%0\n"
- " xor" "w" " %" "w" "1,%" "w" "1\n"
- " jmp 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 1b,3b\n"
+ "1: mov" "b" " %2,%" "b" "1\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %3,%0\n"
+ " xor" "b" " %" "b" "1,%" "b" "1\n"
+ " jmp 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b,3b\n"
+ ".text" : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
+ ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err )) ;
+ break;
+ case 2:
+ __asm__ __volatile__(
+ "1: mov" "w" " %2,%" "w" "1\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %3,%0\n"
+ " xor" "w" " %" "w" "1,%" "w" "1\n"
+ " jmp 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n"
+ " .long 1b,3b\n"
".text" : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
- ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err ));
- break;
- case 4:
- __asm__ __volatile__(
- "1: mov" "l" " %2,%" "" "1\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl %3,%0\n"
- " xor" "l" " %" "" "1,%" "" "1\n"
- " jmp 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 4\n" " .long 1b,3b\n"
+ ( __gu_addr )) ), "i"(- 14 ), "0"( __gu_err ));
+ break;
+ case 4:
+ __asm__ __volatile__(
+ "1: mov" "l" " %2,%" "" "1\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl %3,%0\n"
+ " xor" "l" " %" "" "1,%" "" "1\n"
+ " jmp 2b\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 4\n" " .long 1b,3b\n"
".text" : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
- ( __gu_addr )) ), "i"(- 14 ), "0"(__gu_err));
- break;
- default:
- (__gu_val) = __get_user_bad();
- }
- } while (0) ;
- ((c)) = (__typeof__(*((buf))))__gu_val;
+ ( __gu_addr )) ), "i"(- 14 ), "0"(__gu_err));
+ break;
+ default:
+ (__gu_val) = __get_user_bad();
+ }
+ } while (0) ;
+ ((c)) = (__typeof__(*((buf))))__gu_val;
__gu_err;
}
);
@@ -127,12 +127,12 @@
> xorl %edx,%edx
> movl current_set,%eax
- > cmpl $24,788(%eax)
- > je .L1424
+ > cmpl $24,788(%eax)
+ > je .L1424
> cmpl $-1073741825,64(%esp)
- > ja .L1423
+ > ja .L1423
> .L1424:
- > movl %edx,%eax
+ > movl %edx,%eax
> movl 64(%esp),%ebx
> #APP
> 1: movb (%ebx),%dl /* this is the actual user access */
@@ -149,17 +149,17 @@
> .L1423:
> movzbl %dl,%esi
-The optimizer does a good job and gives us something we can actually
-understand. Can we? The actual user access is quite obvious. Thanks
-to the unified address space we can just access the address in user
+The optimizer does a good job and gives us something we can actually
+understand. Can we? The actual user access is quite obvious. Thanks
+to the unified address space we can just access the address in user
memory. But what does the .section stuff do?????
To understand this we have to look at the final kernel:
> objdump --section-headers vmlinux
- >
+ >
> vmlinux: file format elf32-i386
- >
+ >
> Sections:
> Idx Name Size VMA LMA File off Algn
> 0 .text 00098f40 c0100000 c0100000 00001000 2**4
@@ -198,18 +198,18 @@
The whole user memory access is reduced to 10 x86 machine instructions.
The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section
+in the normal execution path. They are located in a different section
of the executable file:
> objdump --disassemble --section=.fixup vmlinux
- >
+ >
> c0199ff5 <.fixup+10b5> movl $0xfffffff2,%eax
> c0199ffa <.fixup+10ba> xorb %dl,%dl
> c0199ffc <.fixup+10bc> jmp c017e7a7 <do_con_write+e3>
And finally:
> objdump --full-contents --section=__ex_table vmlinux
- >
+ >
> c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0 ................
> c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0 ................
> c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0 ................
@@ -235,8 +235,8 @@
ended up in the .fixup section of the object file and the addresses
.long 1b,3b
ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1
-backward) is the address of the instruction that might fault, i.e.
+are local labels. The local label 1b (1b stands for next label 1
+backward) is the address of the instruction that might fault, i.e.
in our case the address of the label 1 is c017e7a5:
the original assembly code: > 1: movb (%ebx),%dl
and linked in vmlinux : > c017e7a5 <do_con_write+e1> movb (%ebx),%dl
@@ -254,7 +254,7 @@
becomes the value pair
> c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5 ................
^this is ^this is
- 1b 3b
+ 1b 3b
c017e7a5,c0199ff5 in the exception table of the kernel.
So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@
3.) CPU calls do_page_fault
4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
5.) search_exception_table looks up the address c017e7a5 in the
- exception table (i.e. the contents of the ELF section __ex_table)
+ exception table (i.e. the contents of the ELF section __ex_table)
and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault
+6.) do_page_fault modifies its own return address to point to the fault
handle code and returns.
7.) execution continues in the fault handling code.
8.) 8a) EAX becomes -EFAULT (== -14)
diff --git a/MAINTAINERS b/MAINTAINERS
index fa2a16d..b1114cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,8 +73,8 @@
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
-P: Person
-M: Mail patches to
+P: Person (obsolete)
+M: Mail patches to: FullName <address@domain>
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
@@ -104,88 +104,74 @@
matches all files in and below net excluding net/ipv6/
3C505 NETWORK DRIVER
-P: Philip Blundell
-M: philb@gnu.org
+M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/3c505*
3C59X NETWORK DRIVER
-P: Steffen Klassert
-M: klassert@mathematik.tu-chemnitz.de
+M: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/vortex.txt
F: drivers/net/3c59x.c
3CR990 NETWORK DRIVER
-P: David Dillow
-M: dave@thedillows.org
+M: David Dillow <dave@thedillows.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/typhoon*
3W-9XXX SATA-RAID CONTROLLER DRIVER
-P: Adam Radford
-M: linuxraid@amcc.com
+M: Adam Radford <linuxraid@amcc.com>
L: linux-scsi@vger.kernel.org
W: http://www.amcc.com
S: Supported
F: drivers/scsi/3w-9xxx*
3W-XXXX ATA-RAID CONTROLLER DRIVER
-P: Adam Radford
-M: linuxraid@amcc.com
+M: Adam Radford <linuxraid@amcc.com>
L: linux-scsi@vger.kernel.org
W: http://www.amcc.com
S: Supported
F: drivers/scsi/3w-xxxx*
53C700 AND 53C700-66 SCSI DRIVER
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/53c700*
6PACK NETWORK DRIVER FOR AX.25
-P: Andreas Koensgen
-M: ajk@iehk.rwth-aachen.de
+M: Andreas Koensgen <ajk@comnets.uni-bremen.de>
L: linux-hams@vger.kernel.org
S: Maintained
F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-P: Alan Cox
-M: alan@lxorguk.ukuu.org.uk
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
-S: Odd Fixes
+S: Orphan
F: drivers/serial/8250*
F: include/linux/serial_8250.h
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-P: Paul Gortmaker
-M: p_gortmaker@yahoo.com
+M: Paul Gortmaker <p_gortmaker@yahoo.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/*8390*
F: drivers/net/ax88796.c
9P FILE SYSTEM
-P: Eric Van Hensbergen
-M: ericvh@gmail.com
-P: Ron Minnich
-M: rminnich@sandia.gov
-P: Latchesar Ionkov
-M: lucho@ionkov.net
+M: Eric Van Hensbergen <ericvh@gmail.com>
+M: Ron Minnich <rminnich@sandia.gov>
+M: Latchesar Ionkov <lucho@ionkov.net>
L: v9fs-developer@lists.sourceforge.net
W: http://swik.net/v9fs
T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
@@ -194,15 +180,13 @@
F: fs/9p/
A2232 SERIAL BOARD DRIVER
-P: Enver Haase
-M: A2232@gmx.net
+M: Enver Haase <A2232@gmx.net>
L: linux-m68k@lists.linux-m68k.org
S: Maintained
F: drivers/char/ser_a2232*
AACRAID SCSI RAID DRIVER
-P: Adaptec OEM Raid Solutions
-M: aacraid@adaptec.com
+M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Supported
@@ -210,44 +194,38 @@
F: drivers/scsi/aacraid/
ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-P: Hans de Goede
-M: j.w.r.degoede@hhs.nl
+M: Hans de Goede <j.w.r.degoede@hhs.nl>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/abituguru.c
ABIT UGURU 3 HARDWARE MONITOR DRIVER
-P: Alistair John Strachan
-M: alistair@devzero.co.uk
+M: Alistair John Strachan <alistair@devzero.co.uk>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/abituguru3.c
ACENIC DRIVER
-P: Jes Sorensen
-M: jes@trained-monkey.org
+M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
S: Maintained
F: drivers/net/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
-P: Peter Feuerer
-M: peter@piie.net
-W: http://piie.net/?section=acerhdf
-S: Maintained
-F: drivers/platform/x86/acerhdf.c
+M: Peter Feuerer <peter@piie.net>
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
+M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: aceracpi@googlegroups.com (subscribers-only)
W: http://code.google.com/p/aceracpi
S: Maintained
F: drivers/platform/x86/acer-wmi.c
ACPI
-P: Len Brown
-M: lenb@kernel.org
+M: Len Brown <lenb@kernel.org>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
@@ -257,8 +235,7 @@
F: include/linux/acpi.h
ACPI BATTERY DRIVERS
-P: Alexey Starikovskiy
-M: astarikovskiy@suse.de
+M: Alexey Starikovskiy <astarikovskiy@suse.de>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
@@ -266,80 +243,69 @@
F: drivers/acpi/*sbs*
ACPI EC DRIVER
-P: Alexey Starikovskiy
-M: astarikovskiy@suse.de
+M: Alexey Starikovskiy <astarikovskiy@suse.de>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/ec.c
ACPI FAN DRIVER
-P: Zhang Rui
-M: rui.zhang@intel.com
+M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/fan.c
ACPI PCI HOTPLUG DRIVER
-P: Kristen Carlson Accardi
-M: kristen.c.accardi@intel.com
+M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/acpi*
ACPI THERMAL DRIVER
-P: Zhang Rui
-M: rui.zhang@intel.com
+M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/*thermal*
ACPI VIDEO DRIVER
-P: Zhang Rui
-M: rui.zhang@intel.com
+M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/acpi/video.c
ACPI WMI DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
+M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Maintained
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Thibaut Varene
-M: T-Bone@parisc-linux.org
+M: Kyle McMartin <kyle@mcmartin.ca>
+M: Thibaut Varene <T-Bone@parisc-linux.org>
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/pci/ad1889.*
ADM1025 HARDWARE MONITOR DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/adm1025
F: drivers/hwmon/adm1025.c
ADM1029 HARDWARE MONITOR DRIVER
-P: Corentin Labbe
-M: corentin.labbe@geomatys.fr
+M: Corentin Labbe <corentin.labbe@geomatys.fr>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/adm1029.c
ADM8211 WIRELESS DRIVER
-P: Michael Wu
-M: flamingice@sourmilk.net
+M: Michael Wu <flamingice@sourmilk.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -347,35 +313,30 @@
F: drivers/net/wireless/adm8211.*
ADT746X FAN DRIVER
-P: Colin Leroy
-M: colin@colino.net
+M: Colin Leroy <colin@colino.net>
S: Maintained
F: drivers/macintosh/therm_adt746x.c
ADVANSYS SCSI DRIVER
-P: Matthew Wilcox
-M: matthew@wil.cx
+M: Matthew Wilcox <matthew@wil.cx>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/advansys.txt
F: drivers/scsi/advansys.c
AEDSP16 DRIVER
-P: Riccardo Facchetti
-M: fizban@tin.it
+M: Riccardo Facchetti <fizban@tin.it>
S: Maintained
F: sound/oss/aedsp16.c
AFFS FILE SYSTEM
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Roman Zippel <zippel@linux-m68k.org>
S: Maintained
F: Documentation/filesystems/affs.txt
F: fs/affs/
AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
L: linux-afs@lists.infradead.org
S: Supported
F: fs/afs/
@@ -383,40 +344,35 @@
F: net/rxrpc/af_rxrpc.c
AGPGART DRIVER
-P: David Airlie
-M: airlied@linux.ie
+M: David Airlie <airlied@linux.ie>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/char/agp/
F: include/linux/agp*
AHA152X SCSI DRIVER
-P: Juergen E. Fischer
-M: fischer@norbit.de
+M: "Juergen E. Fischer" <fischer@norbit.de>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aha152x*
F: drivers/scsi/pcmcia/aha152x*
AIC7XXX / AIC79XX SCSI DRIVER
-P: Hannes Reinecke
-M: hare@suse.de
+M: Hannes Reinecke <hare@suse.de>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aic7xxx/
F: drivers/scsi/aic7xxx_old/
AIO
-P: Benjamin LaHaise
-M: bcrl@kvack.org
+M: Benjamin LaHaise <bcrl@kvack.org>
L: linux-aio@kvack.org
S: Supported
F: fs/aio.c
F: include/linux/*aio*.h
ALCATEL SPEEDTOUCH USB DRIVER
-P: Duncan Sands
-M: duncan.sands@free.fr
+M: Duncan Sands <duncan.sands@free.fr>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
@@ -424,32 +380,27 @@
F: drivers/usb/atm/usbatm.c
ALCHEMY AU1XX0 MMC DRIVER
-P: Manuel Lauss
-M: manuel.lauss@gmail.com
+M: Manuel Lauss <manuel.lauss@gmail.com>
S: Maintained
F: drivers/mmc/host/au1xmmc.c
ALI1563 I2C DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-ali1563
F: drivers/i2c/busses/i2c-ali1563.c
ALPHA PORT
-P: Richard Henderson
-M: rth@twiddle.net
+M: Richard Henderson <rth@twiddle.net>
S: Odd Fixes for 2.4; Maintained for 2.6.
-P: Ivan Kokshaysky
-M: ink@jurassic.park.msu.ru
+M: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
S: Maintained for 2.4; PCI support for 2.6.
L: linux-alpha@vger.kernel.org
F: arch/alpha/
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-P: Thomas Dahlmann
-M: dahlmann.thomas@arcor.de
+M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
@@ -466,8 +417,7 @@
F: arch/x86/include/asm/geode.h
AMD IOMMU (AMD-VI)
-P: Joerg Roedel
-M: joerg.roedel@amd.com
+M: Joerg Roedel <joerg.roedel@amd.com>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
S: Supported
@@ -475,40 +425,33 @@
F: arch/x86/include/asm/amd_iommu*.h
AMD MICROCODE UPDATE SUPPORT
-P: Andreas Herrmann
-M: andreas.herrmann3@amd.com
+M: Andreas Herrmann <andreas.herrmann3@amd.com>
L: amd64-microcode@amd64.org
S: Supported
F: arch/x86/kernel/microcode_amd.c
AMS (Apple Motion Sensor) DRIVER
-P: Stelian Pop
-M: stelian@popies.net
-P: Michael Hanselmann
-M: linux-kernel@hansmi.ch
+M: Stelian Pop <stelian@popies.net>
+M: Michael Hanselmann <linux-kernel@hansmi.ch>
S: Supported
F: drivers/hwmon/ams/
AMSO1100 RNIC DRIVER
-P: Tom Tucker
-M: tom@opengridcomputing.com
-P: Steve Wise
-M: swise@opengridcomputing.com
+M: Tom Tucker <tom@opengridcomputing.com>
+M: Steve Wise <swise@opengridcomputing.com>
L: general@lists.openfabrics.org
S: Maintained
F: drivers/infiniband/hw/amso1100/
AOA (Apple Onboard Audio) ALSA DRIVER
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linuxppc-dev@ozlabs.org
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: sound/aoa/
APM DRIVER
-P: Stephen Rothwell
-M: sfr@canb.auug.org.au
+M: Stephen Rothwell <sfr@canb.auug.org.au>
L: linux-laptop@vger.kernel.org
W: http://www.canb.auug.org.au/~sfr/
S: Supported
@@ -516,51 +459,44 @@
F: include/linux/apm_bios.h
APPLE BCM5974 MULTITOUCH DRIVER
-P: Henrik Rydberg
-M: rydberg@euromail.se
+M: Henrik Rydberg <rydberg@euromail.se>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
-P: Nicolas Boichat
-M: nicolas@boichat.ch
+M: Nicolas Boichat <nicolas@boichat.ch>
L: mactel-linux-devel@lists.sourceforge.net
S: Maintained
F: drivers/hwmon/applesmc.c
APPLETALK NETWORK LAYER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
S: Maintained
F: drivers/net/appletalk/
F: net/appletalk/
APPLETOUCH TOUCHPAD DRIVER
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-input@vger.kernel.org
S: Maintained
F: Documentation/input/appletouch.txt
F: drivers/input/mouse/appletouch.c
ARC FRAMEBUFFER DRIVER
-P: Jaya Kumar
-M: jayalk@intworks.biz
+M: Jaya Kumar <jayalk@intworks.biz>
S: Maintained
F: drivers/video/arcfb.c
F: drivers/video/fb_defio.c
ARM MFM AND FLOPPY DRIVERS
-P: Ian Molton
-M: spyro@f2s.com
+M: Ian Molton <spyro@f2s.com>
S: Maintained
F: arch/arm/lib/floppydma.S
F: arch/arm/include/asm/floppy.h
ARM PORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
@@ -571,79 +507,67 @@
F: drivers/mmc/host/mmci.*
ARM/ADI ROADRUNNER MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mach-ixp23xx/
F: arch/arm/mach-ixp23xx/include/mach/
ARM/ADS SPHERE MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/AFEB9260 MACHINE SUPPORT
-P: Sergey Lapin
-M: slapin@ossfans.org
+M: Sergey Lapin <slapin@ossfans.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/AJECO 1ARM MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P: Andrew Victor
-M: linux@maxim.org.za
+M: Andrew Victor <linux@maxim.org.za>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://maxim.org.za/at91_26.html
S: Maintained
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CLKDEV SUPPORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
F: arch/arm/common/clkdev.c
F: arch/arm/include/asm/clkdev.h
ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
-P: Mike Rapoport
-M: mike@compulab.co.il
+M: Mike Rapoport <mike@compulab.co.il>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CORGI MACHINE SUPPORT
-P: Richard Purdie
-M: rpurdie@rpsys.net
+M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-P: Paulius Zaleckas
-M: paulius.zaleckas@teltonika.lt
+M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
@@ -651,12 +575,9 @@
F: drivers/net/arm/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-P: Daniel Ribeiro
-M: drwyrm@gmail.com
-P: Stefan Schmidt
-M: stefan@openezx.org
-P: Harald Welte
-M: laforge@openezx.org
+M: Daniel Ribeiro <drwyrm@gmail.com>
+M: Stefan Schmidt <stefan@openezx.org>
+M: Harald Welte <laforge@openezx.org>
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
@@ -664,15 +585,13 @@
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
-P: Paulius Zaleckas
-M: paulius.zaleckas@teltonika.lt
+M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
@@ -680,175 +599,146 @@
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-P: Sascha Hauer
-M: kernel@pengutronix.de
+M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/GUMSTIX MACHINE SUPPORT
-P: Steve Sakoman
-M: sakoman@gmail.com
+M: Steve Sakoman <sakoman@gmail.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
-P: Philipp Zabel
-M: philipp.zabel@gmail.com
+M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
F: arch/arm/mach-pxa/hx4700.c
F: arch/arm/mach-pxa/include/mach/hx4700.h
ARM/HP JORNADA 7XX MACHINE SUPPORT
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
+M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
W: www.jlime.com
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
+F: arch/arm/mach-sa1100/jornada720.c
+F: arch/arm/mach-sa1100/include/mach/jornada720.h
ARM/INTEL IOP32X ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IOP33X ARM ARCHITECTURE
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IOP13XX ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IQ81342EX MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/INTEL IXP2000 ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/INTEL IXDP2850 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/INTEL IXP23XX ARM ARCHITECTURE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/INTEL XSC3 (MANZANO) ARM CORE
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/LOGICPD PXA270 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/MAGICIAN MACHINE SUPPORT
-P: Philipp Zabel
-M: philipp.zabel@gmail.com
+M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
ARM/MIOA701 MACHINE SUPPORT
-P: Robert Jarzmik
-M: robert.jarzmik@free.fr
+M: Robert Jarzmik <robert.jarzmik@free.fr>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
F: arch/arm/mach-pxa/mioa701.c
S: Maintained
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
-P: Michael Petchkovsky
-M: mkpetch@internode.on.net
+M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-P: Nelson Castillo
-M: arhuaco@freaks-unidos.net
+M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
ARM/TOSA MACHINE SUPPORT
-P: Dmitry Eremin-Solenikov
-M: dbaryshkov@gmail.com
-P: Dirk Opfer
-M: dirk@opfer-online.de
+M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-P: Marek Vasut
-M: marek.vasut@gmail.com
+M: Marek Vasut <marek.vasut@gmail.com>
W: http://hackndev.com
S: Maintained
ARM/PALM TREO 680 SUPPORT
-P: Tomas Cech
-M: sleep_walker@suse.cz
+M: Tomas Cech <sleep_walker@suse.cz>
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
-P: Sergey Lapin
-M: slapin@ossfans.org
+M: Sergey Lapin <slapin@ossfans.org>
W: http://hackndev.com
S: Maintained
ARM/PLEB SUPPORT
-P: Peter Chubb
-M: pleb@gelato.unsw.edu.au
+M: Peter Chubb <pleb@gelato.unsw.edu.au>
W: http://www.disy.cse.unsw.edu.au/Hardware/PLEB
S: Maintained
ARM/PT DIGITAL BOARD PORT
-P: Stefan Eletzhofer
-M: stefan.eletzhofer@eletztrick.de
+M: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
ARM/RADISYS ENP2611 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/RISCPC ARCHITECTURE
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
@@ -862,63 +752,86 @@
F: drivers/scsi/arm/
ARM/SHARK MACHINE SUPPORT
-P: Alexander Schulz
-M: alex@shark-linux.de
+M: Alexander Schulz <alex@shark-linux.de>
W: http://www.shark-linux.de/shark.html
S: Maintained
-ARM/S3C2410 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+ARM/SAMSUNG ARM ARCHITECTURES
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
+F: arch/arm/plat-s3c/
+F: arch/arm/plat-s3c24xx/
+
+ARM/S3C2410 ARM ARCHITECTURE
+M: Ben Dooks <ben-linux@fluff.org>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c2410/
ARM/S3C2440 ARM ARCHITECTURE
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.fluff.org/ben/linux/
S: Maintained
+F: arch/arm/mach-s3c2440/
+
+ARM/S3C2442 ARM ARCHITECTURE
+M: Ben Dooks <ben-linux@fluff.org>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c2442/
+
+ARM/S3C2443 ARM ARCHITECTURE
+M: Ben Dooks <ben-linux@fluff.org>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c2443/
+
+ARM/S3C6400 ARM ARCHITECTURE
+M: Ben Dooks <ben-linux@fluff.org>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c6400/
+
+ARM/S3C6410 ARM ARCHITECTURE
+M: Ben Dooks <ben-linux@fluff.org>
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.fluff.org/ben/linux/
+S: Maintained
+F: arch/arm/mach-s3c6410/
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/THECUS N2100 MACHINE SUPPORT
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P: Wan ZongShun
-M: mcuos.com@gmail.com
+M: Wan ZongShun <mcuos.com@gmail.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.mcuos.com
S: Maintained
ARM/VFP SUPPORT
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/vfp/
-ARPD SUPPORT
-P: Jonathan Layes
-L: netdev@vger.kernel.org
-S: Maintained
-F: net/ipv4/arp.c
-
ASUS ACPI EXTRAS DRIVER
-P: Corentin Chary
-M: corentincj@iksaif.net
-P: Karol Kozimor
-M: sziwan@users.sourceforge.net
+M: Corentin Chary <corentincj@iksaif.net>
+M: Karol Kozimor <sziwan@users.sourceforge.net>
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
@@ -926,25 +839,21 @@
F: drivers/platform/x86/asus_acpi.c
ASUS ASB100 HARDWARE MONITOR DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/asb100.c
ASUS LAPTOP EXTRAS DRIVER
-P: Corentin Chary
-M: corentincj@iksaif.net
+M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
-P: Dan Williams
-M: dan.j.williams@intel.com
-P: Maciej Sosnowski
-M: maciej.sosnowski@intel.com
+M: Dan Williams <dan.j.williams@intel.com>
+M: Maciej Sosnowski <maciej.sosnowski@intel.com>
W: http://sourceforge.net/projects/xscaleiop
S: Supported
F: Documentation/crypto/async-tx-api.txt
@@ -954,64 +863,49 @@
F: include/linux/async_tx.h
ATA OVER ETHERNET (AOE) DRIVER
-P: Ed L. Cashin
-M: ecashin@coraid.com
+M: "Ed L. Cashin" <ecashin@coraid.com>
W: http://www.coraid.com/support/linux
S: Supported
F: Documentation/aoe/
F: drivers/block/aoe/
ATHEROS ATH5K WIRELESS DRIVER
-P: Jiri Slaby
-M: jirislaby@gmail.com
-P: Nick Kossifidis
-M: mickflemm@gmail.com
-P: Luis R. Rodriguez
-M: lrodriguez@atheros.com
-P: Bob Copeland
-M: me@bobcopeland.com
+M: Jiri Slaby <jirislaby@gmail.com>
+M: Nick Kossifidis <mickflemm@gmail.com>
+M: "Luis R. Rodriguez" <lrodriguez@atheros.com>
+M: Bob Copeland <me@bobcopeland.com>
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
S: Maintained
F: drivers/net/wireless/ath/ath5k/
ATHEROS ATH9K WIRELESS DRIVER
-P: Luis R. Rodriguez
-M: lrodriguez@atheros.com
-P: Jouni Malinen
-M: jmalinen@atheros.com
-P: Sujith Manoharan
-M: Sujith.Manoharan@atheros.com
-P: Vasanthakumar Thiagarajan
-M: vasanth@atheros.com
-P: Senthil Balasubramanian
-M: senthilkumar@atheros.com
+M: "Luis R. Rodriguez" <lrodriguez@atheros.com>
+M: Jouni Malinen <jmalinen@atheros.com>
+M: Sujith Manoharan <Sujith.Manoharan@atheros.com>
+M: Vasanthakumar Thiagarajan <vasanth@atheros.com>
+M: Senthil Balasubramanian <senthilkumar@atheros.com>
L: linux-wireless@vger.kernel.org
L: ath9k-devel@lists.ath9k.org
S: Supported
F: drivers/net/wireless/ath/ath9k/
ATHEROS AR9170 WIRELESS DRIVER
-P: Christian Lamparter
-M: chunkeey@web.de
+M: Christian Lamparter <chunkeey@web.de>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ar9170
S: Maintained
F: drivers/net/wireless/ath/ar9170/
ATI_REMOTE2 DRIVER
-P: Ville Syrjala
-M: syrjala@sci.fi
+M: Ville Syrjala <syrjala@sci.fi>
S: Maintained
F: drivers/input/misc/ati_remote2.c
ATLX ETHERNET DRIVERS
-P: Jay Cliburn
-M: jcliburn@gmail.com
-P: Chris Snook
-M: csnook@redhat.com
-P: Jie Yang
-M: jie.yang@atheros.com
+M: Jay Cliburn <jcliburn@gmail.com>
+M: Chris Snook <csnook@redhat.com>
+M: Jie Yang <jie.yang@atheros.com>
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
@@ -1019,8 +913,7 @@
F: drivers/net/atlx/
ATM
-P: Chas Williams
-M: chas@cmf.nrl.navy.mil
+M: Chas Williams <chas@cmf.nrl.navy.mil>
L: linux-atm-general@lists.sourceforge.net (subscribers-only)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
@@ -1029,8 +922,7 @@
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
-P: Nicolas Ferre
-M: nicolas.ferre@atmel.com
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
@@ -1038,49 +930,42 @@
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
-P: Nicolas Ferre
-M: nicolas.ferre@atmel.com
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
ATMEL AT91 / AT32 SERIAL DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/serial/atmel_serial.c
ATMEL LCDFB DRIVER
-P: Nicolas Ferre
-M: nicolas.ferre@atmel.com
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/atmel_lcdfb.c
F: include/video/atmel_lcdc.h
ATMEL MACB ETHERNET DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/net/macb.*
ATMEL SPI DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/spi/atmel_spi.*
ATMEL USBA UDC DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
L: kernel@avr32linux.org
W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
S: Supported
F: drivers/usb/gadget/atmel_usba_udc.*
ATMEL WIRELESS DRIVER
-P: Simon Kelley
-M: simon@thekelleys.org.uk
+M: Simon Kelley <simon@thekelleys.org.uk>
L: linux-wireless@vger.kernel.org
W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
@@ -1088,10 +973,8 @@
F: drivers/net/wireless/atmel*
AUDIT SUBSYSTEM
-P: Al Viro
-M: viro@zeniv.linux.org.uk
-P: Eric Paris
-M: eparis@redhat.com
+M: Al Viro <viro@zeniv.linux.org.uk>
+M: Eric Paris <eparis@redhat.com>
L: linux-audit@redhat.com (subscribers-only)
W: http://people.redhat.com/sgrubb/audit/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
@@ -1100,8 +983,7 @@
F: kernel/audit*
AUXILIARY DISPLAY DRIVERS
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -1109,8 +991,7 @@
F: include/linux/cfag12864b.h
AVR32 ARCHITECTURE
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
W: http://www.atmel.com/products/AVR32/
W: http://avr32linux.org/
W: http://avrfreaks.net/
@@ -1118,14 +999,12 @@
F: arch/avr32/
AVR32/AT32AP MACHINE SUPPORT
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: arch/avr32/mach-at32ap/
AX.25 NETWORK LAYER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
@@ -1134,128 +1013,110 @@
F: net/ax25/
B43 WIRELESS DRIVER
-P: Michael Buesch
-M: mb@bu3sch.de
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
+M: Michael Buesch <mb@bu3sch.de>
+M: Stefano Brivio <stefano.brivio@polimi.it>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
F: drivers/net/wireless/b43/
B43LEGACY WIRELESS DRIVER
-P: Larry Finger
-M: Larry.Finger@lwfinger.net
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
+M: Larry Finger <Larry.Finger@lwfinger.net>
+M: Stefano Brivio <stefano.brivio@polimi.it>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
F: drivers/net/wireless/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
-P: Richard Purdie
-M: rpurdie@rpsys.net
+M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
F: drivers/video/backlight/
F: include/linux/backlight.h
BAYCOM/HDLCDRV DRIVERS FOR AX.25
-P: Thomas Sailer
-M: t.sailer@alumni.ethz.ch
+M: Thomas Sailer <t.sailer@alumni.ethz.ch>
L: linux-hams@vger.kernel.org
W: http://www.baycom.org/~tom/ham/ham.html
S: Maintained
F: drivers/net/hamradio/baycom*
BEFS FILE SYSTEM
-P: Sergey S. Kostyliov
-M: rathamahata@php4.ru
+M: "Sergey S. Kostyliov" <rathamahata@php4.ru>
S: Maintained
F: Documentation/filesystems/befs.txt
F: fs/befs/
BFS FILE SYSTEM
-P: Tigran A. Aivazian
-M: tigran@aivazian.fsnet.co.uk
+M: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
S: Maintained
F: Documentation/filesystems/bfs.txt
F: fs/bfs/
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Mike Frysinger
-M: vapier@gentoo.org
+M: Mike Frysinger <vapier@gentoo.org>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Michael Hennerich
-M: michael.hennerich@analog.com
+M: Michael Hennerich <michael.hennerich@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
-P: Mike Frysinger
-M: vapier.adi@gmail.com
+M: Mike Frysinger <vapier.adi@gmail.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
-P: Sonic Zhang
-M: sonic.zhang@analog.com
+M: Sonic Zhang <sonic.zhang@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
-P: Mike Frysinger
-M: vapier.adi@gmail.com
+M: Mike Frysinger <vapier.adi@gmail.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
-P: Sonic Zhang
-M: sonic.zhang@analog.com
+M: Sonic Zhang <sonic.zhang@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
BLOCK LAYER
-P: Jens Axboe
-M: axboe@kernel.dk
+M: Jens Axboe <axboe@kernel.dk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
F: block/
BLOCK2MTD DRIVER
-P: Joern Engel
-M: joern@lazybastard.org
+M: Joern Engel <joern@lazybastard.org>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/block2mtd.c
BLUETOOTH DRIVERS
-P: Marcel Holtmann
-M: marcel@holtmann.org
+M: Marcel Holtmann <marcel@holtmann.org>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
S: Maintained
F: drivers/bluetooth/
BLUETOOTH SUBSYSTEM
-P: Marcel Holtmann
-M: marcel@holtmann.org
+M: Marcel Holtmann <marcel@holtmann.org>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
@@ -1264,8 +1125,7 @@
F: include/net/bluetooth/
BONDING DRIVER
-P: Jay Vosburgh
-M: fubar@us.ibm.com
+M: Jay Vosburgh <fubar@us.ibm.com>
L: bonding-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/bonding/
S: Supported
@@ -1273,54 +1133,46 @@
F: include/linux/if_bonding.h
BROADCOM B44 10/100 ETHERNET DRIVER
-P: Gary Zambrano
-M: zambrano@broadcom.com
+M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-P: Michael Chan
-M: mchan@broadcom.com
+M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bnx2.*
F: drivers/net/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P: Eilon Greenstein
-M: eilong@broadcom.com
+M: Eilon Greenstein <eilong@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/bnx2x*
BROADCOM TG3 GIGABIT ETHERNET DRIVER
-P: Matt Carlson
-M: mcarlson@broadcom.com
-P: Michael Chan
-M: mchan@broadcom.com
+M: Matt Carlson <mcarlson@broadcom.com>
+M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/tg3.*
BSG (block layer generic sg v4 driver)
-P: FUJITA Tomonori
-M: fujita.tomonori@lab.ntt.co.jp
+M: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
L: linux-scsi@vger.kernel.org
S: Supported
F: block/bsg.c
F: include/linux/bsg.h
BT8XXGPIO DRIVER
-P: Michael Buesch
-M: mb@bu3sch.de
+M: Michael Buesch <mb@bu3sch.de>
W: http://bu3sch.de/btgpio.php
S: Maintained
F: drivers/gpio/bt8xxgpio.c
BTRFS FILE SYSTEM
-P: Chris Mason
-M: chris.mason@oracle.com
+M: Chris Mason <chris.mason@oracle.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
@@ -1329,8 +1181,7 @@
F: fs/btrfs/
BTTV VIDEO4LINUX DRIVER
-P: Mauro Carvalho Chehab
-M: mchehab@infradead.org
+M: Mauro Carvalho Chehab <mchehab@infradead.org>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -1339,16 +1190,14 @@
F: drivers/media/video/bt8xx/bttv*
CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
L: linux-cachefs@redhat.com
S: Supported
F: Documentation/filesystems/caching/cachefiles.txt
F: fs/cachefiles/
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P: Jonathan Corbet
-M: corbet@lwn.net
+M: Jonathan Corbet <corbet@lwn.net>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
@@ -1356,10 +1205,8 @@
F: drivers/media/video/cafe_ccic*
CALGARY x86-64 IOMMU
-P: Muli Ben-Yehuda
-M: muli@il.ibm.com
-P: Jon D. Mason
-M: jdmason@kudzu.us
+M: Muli Ben-Yehuda <muli@il.ibm.com>
+M: "Jon D. Mason" <jdmason@kudzu.us>
L: discuss@x86-64.org
S: Maintained
F: arch/x86/kernel/pci-calgary_64.c
@@ -1368,10 +1215,8 @@
F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
-P: Urs Thuermann
-M: urs.thuermann@volkswagen.de
-P: Oliver Hartkopp
-M: oliver.hartkopp@volkswagen.de
+M: Urs Thuermann <urs.thuermann@volkswagen.de>
+M: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
L: socketcan-core@lists.berlios.de (subscribers-only)
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
@@ -1380,15 +1225,13 @@
F: include/linux/can.h
CAN NETWORK DRIVERS
-P: Wolfgang Grandegger
-M: wg@grandegger.com
+M: Wolfgang Grandegger <wg@grandegger.com>
L: socketcan-core@lists.berlios.de (subscribers-only)
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
CELL BROADBAND ENGINE ARCHITECTURE
-P: Arnd Bergmann
-M: arnd@arndb.de
+M: Arnd Bergmann <arnd@arndb.de>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
@@ -1399,8 +1242,7 @@
F: arch/powerpc/platforms/cell/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-P: David Vrabel
-M: david.vrabel@csr.com
+M: David Vrabel <david.vrabel@csr.com>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/WUSB-Design-overview.txt
@@ -1409,8 +1251,7 @@
F: include/linux/usb/wusb*
CFAG12864B LCD DRIVER
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -1418,8 +1259,7 @@
F: include/linux/cfag12864b.h
CFAG12864BFB LCD FRAMEBUFFER DRIVER
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -1427,8 +1267,7 @@
F: include/linux/cfag12864b.h
CFG80211 and NL80211
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
F: include/linux/nl80211.h
@@ -1437,66 +1276,47 @@
X: net/wireless/wext*
CHECKPATCH
-P: Andy Whitcroft
-M: apw@canonical.com
+M: Andy Whitcroft <apw@canonical.com>
S: Supported
F: scripts/checkpatch.pl
CISCO 10G ETHERNET DRIVER
-P: Scott Feldman
-M: scofeldm@cisco.com
-P: Joe Eykholt
-M: jeykholt@cisco.com
+M: Scott Feldman <scofeldm@cisco.com>
+M: Joe Eykholt <jeykholt@cisco.com>
S: Supported
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/codecs/cs4270*
-CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
-P: Cirrus Logic Corporation (kernel 2.2 driver)
-M: Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
-P: Nils Faerber (port to kernel 2.4)
-M: Nils Faerber <nils@kernelconcepts.de>
-S: Maintained
-F: Documentation/input/cs461x.txt
-F: sound/pci/cs46xx/
-
CLK API
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
F: include/linux/clk.h
CISCO FCOE HBA DRIVER
-P: Abhijeet Joglekar
-M: abjoglek@cisco.com
-P: Joe Eykholt
-M: jeykholt@cisco.com
+M: Abhijeet Joglekar <abjoglek@cisco.com>
+M: Joe Eykholt <jeykholt@cisco.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/fnic/
CODA FILE SYSTEM
-P: Jan Harkes
-M: jaharkes@cs.cmu.edu
+M: Jan Harkes <jaharkes@cs.cmu.edu>
M: coda@cs.cmu.edu
L: codalist@coda.cs.cmu.edu
W: http://www.coda.cs.cmu.edu/
@@ -1506,8 +1326,7 @@
F: include/linux/coda*.h
COMMON INTERNET FILE SYSTEM (CIFS)
-P: Steve French
-M: sfrench@samba.org
+M: Steve French <sfrench@samba.org>
L: linux-cifs-client@lists.samba.org
L: samba-technical@lists.samba.org
W: http://linux-cifs.samba.org/
@@ -1517,63 +1336,57 @@
F: fs/cifs/
COMPACTPCI HOTPLUG CORE
-P: Scott Murray
-M: scottm@somanetworks.com
-M: scott@spiteful.org
+M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/pci/hotplug/cpci_hotplug*
COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-P: Scott Murray
-M: scottm@somanetworks.com
-M: scott@spiteful.org
+M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/pci/hotplug/cpcihp_zt5550.*
COMPACTPCI HOTPLUG GENERIC DRIVER
-P: Scott Murray
-M: scottm@somanetworks.com
-M: scott@spiteful.org
+M: Scott Murray <scott@spiteful.org>
L: linux-pci@vger.kernel.org
-S: Supported
+S: Maintained
F: drivers/pci/hotplug/cpcihp_generic.c
COMPAL LAPTOP SUPPORT
-P: Cezary Jackiewicz
-M: cezary.jackiewicz@gmail.com
+M: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
S: Maintained
F: drivers/platform/x86/compal-laptop.c
COMPUTONE INTELLIPORT MULTIPORT CARD
-P: Michael H. Warfield
-M: mhw@wittsend.com
+M: "Michael H. Warfield" <mhw@wittsend.com>
W: http://www.wittsend.com/computone.html
S: Maintained
F: Documentation/serial/computone.txt
F: drivers/char/ip2/
CONEXANT ACCESSRUNNER USB DRIVER
-P: Simon Arlott
-M: cxacru@fire.lp0.eu
+M: Simon Arlott <cxacru@fire.lp0.eu>
L: accessrunner-general@lists.sourceforge.net
W: http://accessrunner.sourceforge.net/
S: Maintained
F: drivers/usb/atm/cxacru.c
CONFIGFS
-P: Joel Becker
-M: joel.becker@oracle.com
+M: Joel Becker <joel.becker@oracle.com>
S: Supported
F: fs/configfs/
F: include/linux/configfs.h
+CONNECTOR
+M: Evgeniy Polyakov <zbr@ioremap.net>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/connector/
+
CONTROL GROUPS (CGROUPS)
-P: Paul Menage
-M: menage@google.com
-P: Li Zefan
-M: lizf@cn.fujitsu.com
+M: Paul Menage <menage@google.com>
+M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
S: Maintained
F: include/linux/cgroup*
@@ -1581,30 +1394,26 @@
F: mm/*cgroup*
CORETEMP HARDWARE MONITORING DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/coretemp
F: drivers/hwmon/coretemp.c
COSA/SRP SYNC SERIAL DRIVER
-P: Jan "Yenya" Kasprzak
-M: kas@fi.muni.cz
+M: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
W: http://www.fi.muni.cz/~kas/cosa/
S: Maintained
F: drivers/net/wan/cosa*
CPMAC ETHERNET DRIVER
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/cpmac.c
CPU FREQUENCY DRIVERS
-P: Dave Jones
-M: davej@redhat.com
+M: Dave Jones <davej@redhat.com>
L: cpufreq@vger.kernel.org
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
@@ -1614,15 +1423,13 @@
F: include/linux/cpufreq.h
CPUID/MSR DRIVER
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
S: Maintained
F: arch/x86/kernel/cpuid.c
F: arch/x86/kernel/msr.c
CPUSETS
-P: Paul Menage
-M: menage@google.com
+M: Paul Menage <menage@google.com>
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
@@ -1637,20 +1444,16 @@
F: fs/cramfs/
CRIS PORT
-P: Mikael Starvik
-M: starvik@axis.com
-P: Jesper Nilsson
-M: jesper.nilsson@axis.com
+M: Mikael Starvik <starvik@axis.com>
+M: Jesper Nilsson <jesper.nilsson@axis.com>
L: linux-cris-kernel@axis.com
W: http://developer.axis.com
S: Maintained
F: arch/cris/
CRYPTO API
-P: Herbert Xu
-M: herbert@gondor.apana.org.au
-P: David S. Miller
-M: davem@davemloft.net
+M: Herbert Xu <herbert@gondor.apana.org.au>
+M: "David S. Miller" <davem@davemloft.net>
L: linux-crypto@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
S: Maintained
@@ -1661,58 +1464,50 @@
F: include/crypto/
CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
-P: Neil Horman
-M: nhorman@tuxdriver.com
+M: Neil Horman <nhorman@tuxdriver.com>
L: linux-crypto@vger.kernel.org
S: Maintained
CS5535 Audio ALSA driver
-P: Jaya Kumar
-M: jayakumar.alsa@gmail.com
+M: Jaya Kumar <jayakumar.alsa@gmail.com>
S: Maintained
F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-P: Hans Verkuil
-M: hverkuil@xs4all.nl
-P: Andy Walls
-M: awalls@radix.net
+M: Hans Verkuil <hverkuil@xs4all.nl>
+M: Andy Walls <awalls@radix.net>
L: ivtv-devel@ivtvdriver.org
-L: ivtv-users@ivtvdriver.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
+W: http://www.ivtvdriver.org/index.php/Cx18
S: Maintained
F: Documentation/video4linux/cx18.txt
F: drivers/media/video/cx18/
CXGB3 ETHERNET DRIVER (CXGB3)
-P: Divy Le Ray
-M: divy@chelsio.com
+M: Divy Le Ray <divy@chelsio.com>
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
F: drivers/net/cxgb3/
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
-P: Steve Wise
-M: swise@chelsio.com
+M: Steve Wise <swise@chelsio.com>
L: general@lists.openfabrics.org
W: http://www.openfabrics.org
S: Supported
F: drivers/infiniband/hw/cxgb3/
CYBERPRO FB DRIVER
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/video/cyber2000fb.*
CYCLADES 2X SYNC CARD DRIVER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wan/cycx*
@@ -1729,8 +1524,7 @@
F: drivers/net/wan/pc300*
DAMA SLAVE for AX.25
-P: Joerg Reuter
-M: jreuter@yaina.de
+M: Joerg Reuter <jreuter@yaina.de>
W: http://yaina.de/jreuter/
W: http://www.qsl.net/dl1bke/
L: linux-hams@vger.kernel.org
@@ -1744,29 +1538,23 @@
F: net/ax25/sysctl_net_ax25.c
DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
-P: Tobias Ringstrom
-M: tori@unhappy.mine.nu
+M: Tobias Ringstrom <tori@unhappy.mine.nu>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/dmfe.txt
F: drivers/net/tulip/dmfe.c
DC390/AM53C974 SCSI driver
-P: Kurt Garloff
-M: garloff@suse.de
+M: Kurt Garloff <garloff@suse.de>
W: http://www.garloff.de/kurt/linux/dc390/
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
+M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
S: Maintained
F: drivers/scsi/tmscsim.*
DC395x SCSI driver
-P: Oliver Neukum
-M: oliver@neukum.name
-P: Ali Akcaagac
-M: aliakc@web.de
-P: Jamie Lenehan
-M: lenehan@twibble.org
+M: Oliver Neukum <oliver@neukum.name>
+M: Ali Akcaagac <aliakc@web.de>
+M: Jamie Lenehan <lenehan@twibble.org>
W: http://twibble.org/dist/dc395x/
L: dc395x@twibble.org
L: http://lists.twibble.org/mailman/listinfo/dc395x/
@@ -1775,8 +1563,7 @@
F: drivers/scsi/dc395x.*
DCCP PROTOCOL
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: dccp@vger.kernel.org
W: http://linux-net.osdl.org/index.php/DCCP
S: Maintained
@@ -1785,8 +1572,7 @@
F: net/dccp/
DECnet NETWORK LAYER
-P: Christine Caulfield
-M: christine.caulfield@googlemail.com
+M: Christine Caulfield <christine.caulfield@googlemail.com>
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
@@ -1794,40 +1580,34 @@
F: net/decnet/
DEFXX FDDI NETWORK DRIVER
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/net/defxx.*
DELL LAPTOP DRIVER
-P: Matthew Garrett
-M: mjg59@srcf.ucam.org
+M: Matthew Garrett <mjg59@srcf.ucam.org>
S: Maintained
F: drivers/platform/x86/dell-laptop.c
DELL LAPTOP SMM DRIVER
-P: Massimo Dal Zotto
-M: dz@debian.org
+M: Massimo Dal Zotto <dz@debian.org>
W: http://www.debian.org/~dz/i8k/
S: Maintained
F: drivers/char/i8k.c
F: include/linux/i8k.h
DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-P: Doug Warzecha
-M: Douglas_Warzecha@dell.com
+M: Doug Warzecha <Douglas_Warzecha@dell.com>
S: Maintained
F: Documentation/dcdbas.txt
F: drivers/firmware/dcdbas.*
DELL WMI EXTRAS DRIVER
-P: Matthew Garrett
-M: mjg59@srcf.ucam.org
+M: Matthew Garrett <mjg59@srcf.ucam.org>
S: Maintained
DEVICE NUMBER REGISTRY
-P: Torben Mathiasen
-M: device@lanana.org
+M: Torben Mathiasen <device@lanana.org>
W: http://lanana.org/docs/device-list/index.html
S: Maintained
@@ -1842,8 +1622,7 @@
F: include/linux/dm-*.h
DIGI INTL. EPCA DRIVER
-P: Digi International, Inc
-M: Eng.Linux@digi.com
+M: "Digi International, Inc" <Eng.Linux@digi.com>
L: Eng.Linux@digi.com
W: http://www.digi.com
S: Orphan
@@ -1852,34 +1631,29 @@
F: drivers/char/digi*
DIRECTORY NOTIFICATION (DNOTIFY)
-P: Eric Paris
-M: eparis@parisplace.org
+M: Eric Paris <eparis@parisplace.org>
S: Maintained
F: Documentation/filesystems/dnotify.txt
F: fs/notify/dnotify/
F: include/linux/dnotify.h
DISK GEOMETRY AND PARTITION HANDLING
-P: Andries Brouwer
-M: aeb@cwi.nl
+M: Andries Brouwer <aeb@cwi.nl>
W: http://www.win.tue.nl/~aeb/linux/Large-Disk.html
W: http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
W: http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
S: Maintained
DISKQUOTA
-P: Jan Kara
-M: jack@suse.cz
+M: Jan Kara <jack@suse.cz>
S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
F: include/linux/quota*.h
DISTRIBUTED LOCK MANAGER (DLM)
-P: Christine Caulfield
-M: ccaulfie@redhat.com
-P: David Teigland
-M: teigland@redhat.com
+M: Christine Caulfield <ccaulfie@redhat.com>
+M: David Teigland <teigland@redhat.com>
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
@@ -1887,52 +1661,44 @@
F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-P: Maciej Sosnowski
-M: maciej.sosnowski@intel.com
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Maciej Sosnowski <maciej.sosnowski@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/
F: include/linux/dma*
DME1737 HARDWARE MONITOR DRIVER
-P: Juerg Haefliger
-M: juergh@gmail.com
+M: Juerg Haefliger <juergh@gmail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/dme1737
F: drivers/hwmon/dme1737.c
DOCBOOK FOR DOCUMENTATION
-P: Randy Dunlap
-M: rdunlap@xenotime.net
+M: Randy Dunlap <rdunlap@xenotime.net>
S: Maintained
DOCKING STATION DRIVER
-P: Shaohua Li
-M: shaohua.li@intel.com
+M: Shaohua Li <shaohua.li@intel.com>
L: linux-acpi@vger.kernel.org
S: Supported
F: drivers/acpi/dock.c
DOCUMENTATION
-P: Randy Dunlap
-M: rdunlap@xenotime.net
+M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
S: Maintained
F: Documentation/
DOUBLETALK DRIVER
-P: James R. Van Zandt
-M: jrv@vanzandt.mv.com
+M: "James R. Van Zandt" <jrv@vanzandt.mv.com>
L: blinux-list@redhat.com
S: Maintained
F: drivers/char/dtlk.c
F: include/linux/dtlk.h
DPT_I2O SCSI RAID DRIVER
-P: Adaptec OEM Raid Solutions
-M: aacraid@adaptec.com
+M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Maintained
@@ -1940,8 +1706,7 @@
F: drivers/scsi/dpt/
DRIVER CORE, KOBJECTS, AND SYSFS
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
F: Documentation/kobject.txt
@@ -1951,52 +1716,45 @@
F: lib/kobj*
DRM DRIVERS
-P: David Airlie
-M: airlied@linux.ie
+M: David Airlie <airlied@linux.ie>
L: dri-devel@lists.sourceforge.net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/gpu/drm/
DSCC4 DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/wan/dscc4.c
DZ DECSTATION DZ11 SERIAL DRIVER
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/serial/dz.*
EATA-DMA SCSI DRIVER
-P: Michael Neuffer
-M: mike@i-Connect.Net
+M: Michael Neuffer <mike@i-Connect.Net>
L: linux-eata@i-connect.net
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata*
EATA ISA/EISA/PCI SCSI DRIVER
-P: Dario Ballabio
-M: ballabio_dario@emc.com
+M: Dario Ballabio <ballabio_dario@emc.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata.c
EATA-PIO SCSI DRIVER
-P: Michael Neuffer
-M: mike@i-Connect.Net
+M: Michael Neuffer <mike@i-Connect.Net>
L: linux-eata@i-connect.net
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/eata_pio.*
EBTABLES
-P: Bart De Schuymer
-M: bart.de.schuymer@pandora.be
+M: Bart De Schuymer <bart.de.schuymer@pandora.be>
L: ebtables-user@lists.sourceforge.net
L: ebtables-devel@lists.sourceforge.net
W: http://ebtables.sourceforge.net/
@@ -2005,10 +1763,8 @@
F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
-P: Tyler Hicks
-M: tyhicks@linux.vnet.ibm.com
-P: Dustin Kirkland
-M: kirkland@canonical.com
+M: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M: Dustin Kirkland <kirkland@canonical.com>
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
@@ -2016,8 +1772,7 @@
F: fs/ecryptfs/
EDAC-CORE
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
@@ -2026,94 +1781,80 @@
F: include/linux/edac.h
EDAC-AMD64
-P: Doug Thompson
-M: dougthompson@xmission.com
-P: Borislav Petkov
-M: borislav.petkov@amd.com
+M: Doug Thompson <dougthompson@xmission.com>
+M: Borislav Petkov <borislav.petkov@amd.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
F: drivers/edac/amd64_edac*
EDAC-E752X
-P: Mark Gross
-M: mark.gross@intel.com
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Mark Gross <mark.gross@intel.com>
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e752x_edac.c
EDAC-E7XXX
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e7xxx_edac.c
EDAC-I82443BXGX
-P: Tim Small
-M: tim@buttersideup.com
+M: Tim Small <tim@buttersideup.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82443bxgx_edac.c
EDAC-I3000
-P: Jason Uhlenkott
-M: juhlenko@akamai.com
+M: Jason Uhlenkott <juhlenko@akamai.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i3000_edac.c
EDAC-I5000
-P: Doug Thompson
-M: dougthompson@xmission.com
+M: Doug Thompson <dougthompson@xmission.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5000_edac.c
EDAC-I5400
-P: Mauro Carvalho Chehab
-M: mchehab@redhat.com
+M: Mauro Carvalho Chehab <mchehab@redhat.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
EDAC-I82975X
-P: Ranganathan Desikan
-M: rdesikan@jetzbroadband.com
-P: Arvind R.
-M: arvind@acarlab.com
+M: Ranganathan Desikan <ravi@jetztechnologies.com>
+M: "Arvind R." <arvind@jetztechnologies.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
EDAC-PASEMI
-P: Egor Martovetsky
-M: egor@pasemi.com
+M: Egor Martovetsky <egor@pasemi.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/pasemi_edac.c
EDAC-R82600
-P: Tim Small
-M: tim@buttersideup.com
+M: Tim Small <tim@buttersideup.com>
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/r82600_edac.c
EEEPC LAPTOP EXTRAS DRIVER
-P: Corentin Chary
-M: corentincj@iksaif.net
+M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
@@ -2125,66 +1866,54 @@
F: fs/efs/
EHCA (IBM GX bus InfiniBand adapter) DRIVER
-P: Hoang-Nam Nguyen
-M: hnguyen@de.ibm.com
-P: Christoph Raisch
-M: raisch@de.ibm.com
+M: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
+M: Christoph Raisch <raisch@de.ibm.com>
L: general@lists.openfabrics.org
S: Supported
F: drivers/infiniband/hw/ehca/
EMBEDDED LINUX
-P: Paul Gortmaker
-M: paul.gortmaker@windriver.com
-P: Matt Mackall
-M: mpm@selenic.com
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: Paul Gortmaker <paul.gortmaker@windriver.com>
+M: Matt Mackall <mpm@selenic.com>
+M: David Woodhouse <dwmw2@infradead.org>
L: linux-embedded@vger.kernel.org
S: Maintained
EMULEX LPFC FC SCSI DRIVER
-P: James Smart
-M: james.smart@emulex.com
+M: James Smart <james.smart@emulex.com>
L: linux-scsi@vger.kernel.org
W: http://sourceforge.net/projects/lpfcxxxx
S: Supported
F: drivers/scsi/lpfc/
ENE CB710 FLASH CARD READER DRIVER
-P: Michał Mirosław
-M: mirq-linux@rere.qmqm.pl
-L: linux-kernel@vger.kernel.org
+M: Michał Mirosław <mirq-linux@rere.qmqm.pl>
S: Maintained
F: drivers/misc/cb710/
F: drivers/mmc/host/cb710-mmc.*
F: include/linux/cb710.h
EPSON 1355 FRAMEBUFFER DRIVER
-P: Christopher Hoover
-M: ch@murgatroid.com
-P: Christopher Hoover
-M: ch@hpl.hp.com
+M: Christopher Hoover <ch@murgatroid.com>
+M: Christopher Hoover <ch@hpl.hp.com>
S: Maintained
F: drivers/video/epson1355fb.c
EPSON S1D13XXX FRAMEBUFFER DRIVER
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
+M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
F: drivers/video/s1d13xxxfb.c
F: include/video/s1d13xxxfb.h
ETHEREXPRESS-16 NETWORK DRIVER
-P: Philip Blundell
-M: philb@gnu.org
+M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/eexpress.*
ETHERNET BRIDGE
-P: Stephen Hemminger
-M: shemminger@linux-foundation.org
+M: Stephen Hemminger <shemminger@linux-foundation.org>
L: bridge@lists.linux-foundation.org
W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
@@ -2192,8 +1921,7 @@
F: net/bridge/
ETHERTEAM 16I DRIVER
-P: Mika Kuoppala
-M: miku@iki.fi
+M: Mika Kuoppala <miku@iki.fi>
S: Maintained
F: drivers/net/eth16i.c
@@ -2205,12 +1933,9 @@
F: include/linux/ext2*
EXT3 FILE SYSTEM
-P: Stephen Tweedie
-M: sct@redhat.com
-P: Andrew Morton
-M: akpm@linux-foundation.org
-P: Andreas Dilger
-M: adilger@sun.com
+M: Stephen Tweedie <sct@redhat.com>
+M: Andrew Morton <akpm@linux-foundation.org>
+M: Andreas Dilger <adilger@sun.com>
L: linux-ext4@vger.kernel.org
S: Maintained
F: Documentation/filesystems/ext3.txt
@@ -2218,10 +1943,8 @@
F: include/linux/ext3*
EXT4 FILE SYSTEM
-P: Theodore Ts'o
-M: tytso@mit.edu
-P: Andreas Dilger
-M: adilger@sun.com
+M: "Theodore Ts'o" <tytso@mit.edu>
+M: Andreas Dilger <adilger@sun.com>
L: linux-ext4@vger.kernel.org
W: http://ext4.wiki.kernel.org
S: Maintained
@@ -2229,30 +1952,26 @@
F: fs/ext4/
F71805F HARDWARE MONITORING DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/f71805f
F: drivers/hwmon/f71805f.c
FARSYNC SYNCHRONOUS DRIVER
-P: Kevin Curtis
-M: kevin.curtis@farsite.co.uk
+M: Kevin Curtis <kevin.curtis@farsite.co.uk>
W: http://www.farsite.co.uk/
S: Supported
F: drivers/net/wan/farsync.*
FAULT INJECTION SUPPORT
-P: Akinobu Mita
-M: akinobu.mita@gmail.com
+M: Akinobu Mita <akinobu.mita@gmail.com>
S: Supported
F: Documentation/fault-injection/
F: lib/fault-inject.c
FILE LOCKING (flock() and fcntl()/lockf())
-P: Matthew Wilcox
-M: matthew@wil.cx
+M: Matthew Wilcox <matthew@wil.cx>
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: include/linux/fcntl.h
@@ -2261,25 +1980,21 @@
F: fs/locks.c
FILESYSTEMS (VFS and infrastructure)
-P: Alexander Viro
-M: viro@zeniv.linux.org.uk
+M: Alexander Viro <viro@zeniv.linux.org.uk>
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: fs/*
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P: Riku Voipio
-M: riku.vipio@iki.fi
+M: Riku Voipio <riku.vipio@iki.fi>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/f75375s.c
F: include/linux/f75375s.h
FIREWIRE SUBSYSTEM
-P: Kristian Hoegsberg
-M: krh@redhat.com
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
+M: Kristian Hoegsberg <krh@redhat.com>
+M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2294,15 +2009,13 @@
F: include/linux/firmware.h
FPU EMULATOR
-P: Bill Metzenthen
-M: billm@melbpc.org.au
+M: Bill Metzenthen <billm@melbpc.org.au>
W: http://floatingpoint.sourceforge.net/emulator/index.html
S: Maintained
F: arch/x86/math-emu/
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-P: Mike McLagan
-M: mike.mclagan@linux.org
+M: Mike McLagan <mike.mclagan@linux.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/wan/dlci.c
@@ -2317,25 +2030,21 @@
F: include/linux/fb.h
FREESCALE DMA DRIVER
-P: Li Yang
-M: leoli@freescale.com
-P: Zhang Wei
-M: zw@zh-kernel.org
+M: Li Yang <leoli@freescale.com>
+M: Zhang Wei <zw@zh-kernel.org>
L: linuxppc-dev@ozlabs.org
S: Maintained
F: drivers/dma/fsldma.*
FREESCALE I2C CPM DRIVER
-P: Jochen Friedrich
-M: jochen@scram.de
+M: Jochen Friedrich <jochen@scram.de>
L: linuxppc-dev@ozlabs.org
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-cpm.c
FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-P: Sascha Hauer
-M: kernel@pengutronix.de
+M: Sascha Hauer <kernel@pengutronix.de>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
@@ -2343,10 +2052,8 @@
F: drivers/video/imxfb.c
FREESCALE SOC FS_ENET DRIVER
-P: Pantelis Antoniou
-M: pantelis.antoniou@gmail.com
-P: Vitaly Bordug
-M: vbordug@ru.mvista.com
+M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M: Vitaly Bordug <vbordug@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
@@ -2354,39 +2061,34 @@
F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@ozlabs.org
S: Supported
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
FREESCALE HIGHSPEED USB DEVICE DRIVER
-P: Li Yang
-M: leoli@freescale.com
+M: Li Yang <leoli@freescale.com>
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
F: drivers/usb/gadget/fsl_usb2_udc.c
FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
-P: Li Yang
-M: leoli@freescale.com
+M: Li Yang <leoli@freescale.com>
L: netdev@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
F: drivers/net/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: linuxppc-dev@ozlabs.org
S: Supported
F: drivers/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
-P: Timur Tabi
-M: timur@freescale.com
+M: Timur Tabi <timur@freescale.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
L: linuxppc-dev@ozlabs.org
S: Supported
@@ -2394,17 +2096,14 @@
F: sound/soc/fsl/mpc8610_hpcd.c
FREEVXFS FILESYSTEM
-P: Christoph Hellwig
-M: hch@infradead.org
+M: Christoph Hellwig <hch@infradead.org>
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained
F: fs/freevxfs/
FREEZER
-P: Pavel Machek
-M: pavel@ucw.cz
-P: Rafael J. Wysocki
-M: rjw@sisk.pl
+M: Pavel Machek <pavel@ucw.cz>
+M: "Rafael J. Wysocki" <rjw@sisk.pl>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: Documentation/power/freezing-of-tasks.txt
@@ -2412,8 +2111,7 @@
F: kernel/freezer.c
FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
L: linux-cachefs@redhat.com
S: Supported
F: Documentation/filesystems/caching/
@@ -2421,8 +2119,7 @@
F: include/linux/fscache*.h
FTRACE
-P: Steven Rostedt
-M: rostedt@goodmis.org
+M: Steven Rostedt <rostedt@goodmis.org>
S: Maintained
F: Documentation/trace/ftrace.txt
F: arch/*/*/*/ftrace.h
@@ -2431,21 +2128,18 @@
F: kernel/trace/
FUJITSU FR-V (FRV) PORT
-P: David Howells
-M: dhowells@redhat.com
+M: David Howells <dhowells@redhat.com>
S: Maintained
F: arch/frv/
FUJITSU LAPTOP EXTRAS
-P: Jonathan Woithe
-M: jwoithe@physics.adelaide.edu.au
+M: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
L: linux-acpi@vger.kernel.org
S: Maintained
F: drivers/platform/x86/fujitsu-laptop.c
FUSE: FILESYSTEM IN USERSPACE
-P: Miklos Szeredi
-M: miklos@szeredi.hu
+M: Miklos Szeredi <miklos@szeredi.hu>
L: fuse-devel@lists.sourceforge.net
W: http://fuse.sourceforge.net/
S: Maintained
@@ -2453,30 +2147,26 @@
F: include/linux/fuse.h
FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-P: Rik Faith
-M: faith@cs.unc.edu
+M: Rik Faith <faith@cs.unc.edu>
L: linux-scsi@vger.kernel.org
S: Odd Fixes (e.g., new signatures)
F: drivers/scsi/fdomain.*
GDT SCSI DISK ARRAY CONTROLLER DRIVER
-P: Achim Leubner
-M: achim_leubner@adaptec.com
+M: Achim Leubner <achim_leubner@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.icp-vortex.com/
S: Supported
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
-P: Haavard Skinnemoen
-M: hskinnemoen@atmel.com
+M: Haavard Skinnemoen <hskinnemoen@atmel.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
GENERIC HDLC (WAN) DRIVERS
-P: Krzysztof Halasa
-M: khc@pm.waw.pl
+M: Krzysztof Halasa <khc@pm.waw.pl>
W: http://www.kernel.org/pub/linux/utils/net/hdlc/
S: Maintained
F: drivers/net/wan/c101.c
@@ -2488,16 +2178,14 @@
F: drivers/net/wan/wanxl*
GENERIC INCLUDE/ASM HEADER FILES
-P: Arnd Bergmann
-M: arnd@arndb.de
+M: Arnd Bergmann <arnd@arndb.de>
L: linux-arch@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
S: Maintained
F: include/asm-generic
GFS2 FILE SYSTEM
-P: Steven Whitehouse
-M: swhiteho@redhat.com
+M: Steven Whitehouse <swhiteho@redhat.com>
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
@@ -2508,10 +2196,8 @@
F: include/linux/gfs2_ondisk.h
GIGASET ISDN DRIVERS
-P: Hansjoerg Lipp
-M: hjlipp@web.de
-P: Tilman Schmidt
-M: tilman@imap.cc
+M: Hansjoerg Lipp <hjlipp@web.de>
+M: Tilman Schmidt <tilman@imap.cc>
L: gigaset307x-common@lists.sourceforge.net
W: http://gigaset307x.sourceforge.net/
S: Maintained
@@ -2520,8 +2206,7 @@
F: include/linux/gigaset_dev.h
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P: Frank Seidel
-M: frank@f-seidel.de
+M: Frank Seidel <frank@f-seidel.de>
L: lm-sensors@lm-sensors.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
@@ -2533,40 +2218,35 @@
F: drivers/char/hvc_*
GSPCA FINEPIX SUBDRIVER
-P: Frank Zago
-M: frank@zago.net
+M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/finepix.c
GSPCA M5602 SUBDRIVER
-P: Erik Andren
-M: erik.andren@gmail.com
+M: Erik Andren <erik.andren@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/m5602/
GSPCA PAC207 SONIXB SUBDRIVER
-P: Hans de Goede
-M: hdegoede@redhat.com
+M: Hans de Goede <hdegoede@redhat.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/pac207.c
GSPCA T613 SUBDRIVER
-P: Leandro Costantino
-M: lcostantino@gmail.com
+M: Leandro Costantino <lcostantino@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/gspca/t613.c
GSPCA USB WEBCAM DRIVER
-P: Jean-Francois Moine
-M: moinejf@free.fr
+M: Jean-Francois Moine <moinejf@free.fr>
W: http://moinejf.free.fr
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2586,31 +2266,27 @@
F: include/linux/hw_random.h
HARMONY SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
+M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/parisc/harmony.*
HAYES ESP SERIAL DRIVER
-P: Andrew J. Robinson
-M: arobinso@nyx.net
+M: "Andrew J. Robinson" <arobinso@nyx.net>
W: http://www.nyx.net/~arobinso
S: Maintained
F: Documentation/serial/hayes-esp.txt
F: drivers/char/esp.c
HEWLETT-PACKARD SMART2 RAID DRIVER
-P: Chirag Kantharia
-M: chirag.kantharia@hp.com
+M: Chirag Kantharia <chirag.kantharia@hp.com>
L: iss_storagedev@hp.com
S: Maintained
F: Documentation/blockdev/cpqarray.txt
F: drivers/block/cpqarray.*
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-P: Mike Miller
-M: mike.miller@hp.com
+M: Mike Miller <mike.miller@hp.com>
L: iss_storagedev@hp.com
S: Supported
F: Documentation/blockdev/cciss.txt
@@ -2618,25 +2294,21 @@
F: include/linux/cciss_ioctl.h
HFS FILESYSTEM
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Roman Zippel <zippel@linux-m68k.org>
S: Maintained
F: Documentation/filesystems/hfs.txt
F: fs/hfs/
HGA FRAMEBUFFER DRIVER
-P: Ferenc Bakonyi
-M: fero@drama.obuda.kando.hu
+M: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
L: linux-nvidia@lists.surfsouth.com
W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
S: Maintained
F: drivers/video/hgafb.c
HIBERNATION (aka Software Suspend, aka swsusp)
-P: Pavel Machek
-M: pavel@ucw.cz
-P: Rafael J. Wysocki
-M: rjw@sisk.pl
+M: Pavel Machek <pavel@ucw.cz>
+M: "Rafael J. Wysocki" <rjw@sisk.pl>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: arch/x86/power/
@@ -2648,8 +2320,7 @@
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
-P: Jiri Kosina
-M: jkosina@suse.cz
+M: Jiri Kosina <jkosina@suse.cz>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
@@ -2657,16 +2328,14 @@
F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
-P: Thomas Gleixner
-M: tglx@linutronix.de
+M: Thomas Gleixner <tglx@linutronix.de>
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
F: include/linux/hrtimer.h
HIGH-SPEED SCC DRIVER FOR AX.25
-P: Klaus Kudielka
-M: klaus.kudielka@ieee.org
+M: Klaus Kudielka <klaus.kudielka@ieee.org>
L: linux-hams@vger.kernel.org
W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/
S: Maintained
@@ -2674,16 +2343,14 @@
F: drivers/net/hamradio/scc.c
HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-P: HighPoint Linux Team
-M: linux@highpoint-tech.com
+M: HighPoint Linux Team <linux@highpoint-tech.com>
W: http://www.highpoint-tech.com
S: Supported
F: Documentation/scsi/hptiop.txt
F: drivers/scsi/hptiop.c
HIPPI
-P: Jes Sorensen
-M: jes@trained-monkey.org
+M: Jes Sorensen <jes@trained-monkey.org>
L: linux-hippi@sunsite.dk
S: Maintained
F: include/linux/hippidevice.h
@@ -2691,8 +2358,7 @@
F: net/802/hippi.c
HOST AP DRIVER
-P: Jouni Malinen
-M: j@w1.fi
+M: Jouni Malinen <j@w1.fi>
L: hostap@shmoo.com (subscribers-only)
L: linux-wireless@vger.kernel.org
W: http://hostap.epitest.fi/
@@ -2700,82 +2366,69 @@
F: drivers/net/wireless/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
+M: Carlos Corbacho <carlos@strangeworlds.co.uk>
S: Odd Fixes
F: drivers/platform/x86/tc1100-wmi.c
HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-P: Jaroslav Kysela
-M: perex@perex.cz
+M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
F: drivers/net/hp100.*
HPET: High Precision Event Timers driver
-P: Clemens Ladisch
-M: clemens@ladisch.de
+M: Clemens Ladisch <clemens@ladisch.de>
S: Maintained
F: Documentation/timers/hpet.txt
F: drivers/char/hpet.c
F: include/linux/hpet.h
HPET: i386
-P: Venkatesh Pallipadi (Venki)
-M: venkatesh.pallipadi@intel.com
+M: "Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
S: Maintained
F: arch/x86/kernel/hpet.c
F: arch/x86/include/asm/hpet.h
HPET: x86_64
-P: Vojtech Pavlik
-M: vojtech@suse.cz
+M: Vojtech Pavlik <vojtech@suse.cz>
S: Maintained
HPET: ACPI
-P: Bob Picco
-M: bob.picco@hp.com
+M: Bob Picco <bob.picco@hp.com>
S: Maintained
F: drivers/char/hpet.c
HPFS FILESYSTEM
-P: Mikulas Patocka
-M: mikulas@artax.karlin.mff.cuni.cz
+M: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained
F: fs/hpfs/
HSO 3G MODEM DRIVER
-P: Jan Dumon
-M: j.dumon@option.com
+M: Jan Dumon <j.dumon@option.com>
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
HTCPEN TOUCHSCREEN DRIVER
-P: Pau Oliva Fora
-M: pof@eslack.org
+M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/input/touchscreen/htcpen.c
HUGETLB FILESYSTEM
-P: William Irwin
-M: wli@holomorphy.com
+M: William Irwin <wli@holomorphy.com>
S: Maintained
F: fs/hugetlbfs/
I2C/SMBUS STUB DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-stub.c
I2C SUBSYSTEM
-P: Jean Delvare (PC drivers, core)
-M: khali@linux-fr.org
-P: Ben Dooks (embedded platforms)
-M: ben-linux@fluff.org
+M: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -2787,28 +2440,25 @@
F: include/linux/i2c-id.h
I2C-TINY-USB DRIVER
-P: Till Harbaum
-M: till@harbaum.org
+M: Till Harbaum <till@harbaum.org>
L: linux-i2c@vger.kernel.org
W: http://www.harbaum.org/till/i2c_tiny_usb
S: Maintained
F: drivers/i2c/busses/i2c-tiny-usb.c
i386 BOOT CODE
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
S: Maintained
F: arch/x86/boot/
i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
S: Maintained
IA64 (Itanium) PLATFORM
-P: Tony Luck
-M: tony.luck@intel.com
+M: Tony Luck <tony.luck@intel.com>
+M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2816,29 +2466,25 @@
F: arch/ia64/
IBM MCA SCSI SUBSYSTEM DRIVER
-P: Michael Lang
-M: langa2@kph.uni-mainz.de
+M: Michael Lang <langa2@kph.uni-mainz.de>
W: http://www.uni-mainz.de/~langm000/linux.html
S: Maintained
F: drivers/scsi/ibmmca.c
IBM Power Linux RAID adapter
-P: Brian King
-M: brking@us.ibm.com
+M: Brian King <brking@us.ibm.com>
S: Supported
F: drivers/scsi/ipr.*
IBM ServeRAID RAID DRIVER
P: Jack Hammer
-P: Dave Jeffery
-M: ipslinux@adaptec.com
+M: Dave Jeffery <ipslinux@adaptec.com>
W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
S: Supported
F: drivers/scsi/ips.*
IDE SUBSYSTEM
-P: David S. Miller
-M: davem@davemloft.net
+M: "David S. Miller" <davem@davemloft.net>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
S: Maintained
@@ -2847,25 +2493,21 @@
F: include/linux/ide.h
IDE/ATAPI DRIVERS
-P: Borislav Petkov
-M: petkovbb@gmail.com
+M: Borislav Petkov <petkovbb@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: Documentation/cdrom/ide-cd
F: drivers/ide/ide-cd*
IDLE-I7300
-P: Andy Henroid
-M: andrew.d.henroid@intel.com
+M: Andy Henroid <andrew.d.henroid@intel.com>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: drivers/idle/i7300_idle.c
IEEE 1394 SUBSYSTEM
-P: Ben Collins
-M: ben.collins@ubuntu.com
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
+M: Ben Collins <ben.collins@ubuntu.com>
+M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2873,20 +2515,16 @@
F: drivers/ieee1394/
IEEE 1394 RAW I/O DRIVER
-P: Dan Dennedy
-M: dan@dennedy.org
-P: Stefan Richter
-M: stefanr@s5r6.in-berlin.de
+M: Dan Dennedy <dan@dennedy.org>
+M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
S: Maintained
F: drivers/ieee1394/raw1394*
IEEE 802.15.4 SUBSYSTEM
-P: Dmitry Eremin-Solenikov
-M: dbaryshkov@gmail.com
-P: Sergey Lapin
-M: slapin@ossfans.org
-L: linux-zigbee-devel@lists.sourceforge.net
+M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M: Sergey Lapin <slapin@ossfans.org>
+L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
@@ -2894,8 +2532,7 @@
F: drivers/ieee802154/
INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-P: Mimi Zohar
-M: zohar@us.ibm.com
+M: Mimi Zohar <zohar@us.ibm.com>
S: Supported
F: security/integrity/ima/
@@ -2905,12 +2542,9 @@
F: drivers/video/imsttfb.c
INFINIBAND SUBSYSTEM
-P: Roland Dreier
-M: rolandd@cisco.com
-P: Sean Hefty
-M: sean.hefty@intel.com
-P: Hal Rosenstock
-M: hal.rosenstock@gmail.com
+M: Roland Dreier <rolandd@cisco.com>
+M: Sean Hefty <sean.hefty@intel.com>
+M: Hal Rosenstock <hal.rosenstock@gmail.com>
L: general@lists.openfabrics.org (moderated for non-subscribers)
W: http://www.openib.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2920,65 +2554,55 @@
F: include/linux/if_infiniband.h
INOTIFY
-P: John McCutchan
-M: john@johnmccutchan.com
-P: Robert Love
-M: rlove@rlove.org
-P: Eric Paris
-M: eparis@parisplace.org
+M: John McCutchan <john@johnmccutchan.com>
+M: Robert Love <rlove@rlove.org>
+M: Eric Paris <eparis@parisplace.org>
S: Maintained
F: Documentation/filesystems/inotify.txt
F: fs/notify/inotify/
F: include/linux/inotify.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
-P: Dmitry Torokhov
-M: dmitry.torokhov@gmail.com
-M: dtor@mail.ru
+M: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+M: Dmitry Torokhov <dtor@mail.ru>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
F: drivers/input/
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-P: Sylvain Meyer
-M: sylvain.meyer@worldonline.fr
+M: Sylvain Meyer <sylvain.meyer@worldonline.fr>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: Documentation/fb/intelfb.txt
F: drivers/video/intelfb/
INTEL 810/815 FRAMEBUFFER DRIVER
-P: Antonino Daplas
-M: adaplas@gmail.com
+M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/i810/
INTEL MENLOW THERMAL DRIVER
-P: Sujith Thomas
-M: sujith.thomas@intel.com
+M: Sujith Thomas <sujith.thomas@intel.com>
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/platform/x86/intel_menlow.c
INTEL IA32 MICROCODE UPDATE SUPPORT
-P: Tigran Aivazian
-M: tigran@aivazian.fsnet.co.uk
+M: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
S: Maintained
F: arch/x86/kernel/microcode_core.c
F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
-P: Maciej Sosnowski
-M: maciej.sosnowski@intel.com
+M: Maciej Sosnowski <maciej.sosnowski@intel.com>
S: Supported
F: drivers/dma/ioat*
INTEL IOMMU (VT-d)
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: David Woodhouse <dwmw2@infradead.org>
L: iommu@lists.linux-foundation.org
T: git git://git.infradead.org/iommu-2.6.git
S: Supported
@@ -2986,14 +2610,12 @@
F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
-P: Dan Williams
-M: dan.j.williams@intel.com
+M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/iop-adma.c
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-P: Krzysztof Halasa
-M: khc@pm.waw.pl
+M: Krzysztof Halasa <khc@pm.waw.pl>
S: Maintained
F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -3003,29 +2625,22 @@
F: drivers/net/wan/ixp4xx_hss.c
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
+M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
INTEL IXP2000 ETHERNET DRIVER
-P: Lennert Buytenhek
-M: kernel@wantstofly.org
+M: Lennert Buytenhek <kernel@wantstofly.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P: Jeff Kirsher
-M: jeffrey.t.kirsher@intel.com
-P: Jesse Brandeburg
-M: jesse.brandeburg@intel.com
-P: Bruce Allan
-M: bruce.w.allan@intel.com
-P: PJ Waskiewicz
-M: peter.p.waskiewicz.jr@intel.com
-P: John Ronciak
-M: john.ronciak@intel.com
+M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M: Jesse Brandeburg <jesse.brandeburg@intel.com>
+M: Bruce Allan <bruce.w.allan@intel.com>
+M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
@@ -3037,12 +2652,9 @@
F: drivers/net/ixgbe/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-P: Zhu Yi
-M: yi.zhu@intel.com
-P: James Ketrenos
-M: jketreno@linux.intel.com
-P: Reinette Chatre
-M: reinette.chatre@intel.com
+M: Zhu Yi <yi.zhu@intel.com>
+M: James Ketrenos <jketreno@linux.intel.com>
+M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-wireless@vger.kernel.org
L: ipw2100-devel@lists.sourceforge.net
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3052,12 +2664,9 @@
F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-P: Zhu Yi
-M: yi.zhu@intel.com
-P: James Ketrenos
-M: jketreno@linux.intel.com
-P: Reinette Chatre
-M: reinette.chatre@intel.com
+M: Zhu Yi <yi.zhu@intel.com>
+M: James Ketrenos <jketreno@linux.intel.com>
+M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-wireless@vger.kernel.org
L: ipw2100-devel@lists.sourceforge.net
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3067,8 +2676,7 @@
F: drivers/net/wireless/ipw2x00/ipw2200.*
INTEL WIRELESS WIMAX CONNECTION 2400
-P: Inaky Perez-Gonzalez
-M: inaky.perez-gonzalez@intel.com
+M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
@@ -3078,10 +2686,8 @@
F: include/linux/wimax/i2400m.h
INTEL WIRELESS WIFI LINK (iwlwifi)
-P: Zhu Yi
-M: yi.zhu@intel.com
-P: Reinette Chatre
-M: reinette.chatre@intel.com
+M: Zhu Yi <yi.zhu@intel.com>
+M: Reinette Chatre <reinette.chatre@intel.com>
L: linux-wireless@vger.kernel.org
L: ipw3945-devel@lists.sourceforge.net
W: http://intellinuxwireless.org
@@ -3090,47 +2696,39 @@
F: drivers/net/wireless/iwlwifi/
IOC3 ETHERNET DRIVER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
S: Maintained
F: drivers/net/ioc3-eth.c
IOC3 SERIAL DRIVER
-P: Pat Gefre
-M: pfg@sgi.com
+M: Pat Gefre <pfg@sgi.com>
L: linux-mips@linux-mips.org
S: Maintained
F: drivers/serial/ioc3_serial.c
IP MASQUERADING
-P: Juanjo Ciarlante
-M: jjciarla@raiz.uncu.edu.ar
+M: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
S: Maintained
F: net/ipv4/netfilter/ipt_MASQUERADE.c
IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
-P: Sorbica Shieh
-M: sorbica@icplus.com.tw
-P: Jesse Huang
-M: jesse@icplus.com.tw
+M: Francois Romieu <romieu@fr.zoreil.com>
+M: Sorbica Shieh <sorbica@icplus.com.tw>
+M: Jesse Huang <jesse@icplus.com.tw>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ipg.c
IPATH DRIVER
-P: Ralph Campbell
-M: infinipath@qlogic.com
+M: Ralph Campbell <infinipath@qlogic.com>
L: general@lists.openfabrics.org
T: git git://git.qlogic.com/ipath-linux-2.6
S: Supported
F: drivers/infiniband/hw/ipath/
IPMI SUBSYSTEM
-P: Corey Minyard
-M: minyard@acm.org
+M: Corey Minyard <minyard@acm.org>
L: openipmi-developer@lists.sourceforge.net
W: http://openipmi.sourceforge.net/
S: Supported
@@ -3139,20 +2737,16 @@
F: include/linux/ipmi*
IPS SCSI RAID DRIVER
-P: Adaptec OEM Raid Solutions
-M: aacraid@adaptec.com
+M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Maintained
F: drivers/scsi/ips*
IPVS
-P: Wensong Zhang
-M: wensong@linux-vs.org
-P: Simon Horman
-M: horms@verge.net.au
-P: Julian Anastasov
-M: ja@ssi.bg
+M: Wensong Zhang <wensong@linux-vs.org>
+M: Simon Horman <horms@verge.net.au>
+M: Julian Anastasov <ja@ssi.bg>
L: netdev@vger.kernel.org
L: lvs-devel@vger.kernel.org
S: Maintained
@@ -3160,17 +2754,14 @@
F: net/netfilter/ipvs/
IPWIRELESS DRIVER
-P: Jiri Kosina
-M: jkosina@suse.cz
-P: David Sterba
-M: dsterba@suse.cz
+M: Jiri Kosina <jkosina@suse.cz>
+M: David Sterba <dsterba@suse.cz>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
F: drivers/char/pcmcia/ipwireless/
IPX NETWORK LAYER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/ipx.h
@@ -3178,8 +2769,7 @@
F: net/ipx/
IRDA SUBSYSTEM
-P: Samuel Ortiz
-M: samuel@sortiz.org
+M: Samuel Ortiz <samuel@sortiz.org>
L: irda-users@lists.sourceforge.net (subscribers-only)
W: http://irda.sourceforge.net/
S: Maintained
@@ -3190,16 +2780,14 @@
F: net/irda/
ISAPNP
-P: Jaroslav Kysela
-M: perex@perex.cz
+M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
F: Documentation/isapnp.txt
F: drivers/pnp/isapnp/
F: include/linux/isapnp.h
ISCSI
-P: Mike Christie
-M: michaelc@cs.wisc.edu
+M: Mike Christie <michaelc@cs.wisc.edu>
L: open-iscsi@googlegroups.com
W: www.open-iscsi.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
@@ -3208,8 +2796,7 @@
F: include/scsi/*iscsi*
ISDN SUBSYSTEM
-P: Karsten Keil
-M: isdn@linux-pingi.de
+M: Karsten Keil <isdn@linux-pingi.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
@@ -3220,18 +2807,15 @@
F: include/linux/isdn/
ISDN SUBSYSTEM (Eicon active card driver)
-P: Armin Schindler
-M: mac@melware.de
+M: Armin Schindler <mac@melware.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.melware.de
S: Maintained
F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
-P: Hans Verkuil
-M: hverkuil@xs4all.nl
+M: Hans Verkuil <hverkuil@xs4all.nl>
L: ivtv-devel@ivtvdriver.org
-L: ivtv-users@ivtvdriver.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
@@ -3241,25 +2825,22 @@
F: include/linux/ivtv*
JFS FILESYSTEM
-P: Dave Kleikamp
-M: shaggy@austin.ibm.com
+M: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
-S: Supported
+S: Maintained
F: Documentation/filesystems/jfs.txt
F: fs/jfs/
JME NETWORK DRIVER
-P: Guo-Fu Tseng
-M: cooldavid@cooldavid.org
+M: Guo-Fu Tseng <cooldavid@cooldavid.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/jme.*
JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: David Woodhouse <dwmw2@infradead.org>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/doc/jffs2.html
S: Maintained
@@ -3267,10 +2848,8 @@
F: include/linux/jffs2.h
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P: Stephen Tweedie
-M: sct@redhat.com
-P: Andrew Morton
-M: akpm@linux-foundation.org
+M: Stephen Tweedie <sct@redhat.com>
+M: Andrew Morton <akpm@linux-foundation.org>
L: linux-ext4@vger.kernel.org
S: Maintained
F: fs/jbd*/
@@ -3278,48 +2857,41 @@
F: include/linux/jbd*.h
K8TEMP HARDWARE MONITORING DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/k8temp
F: drivers/hwmon/k8temp.c
KCONFIG
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Roman Zippel <zippel@linux-m68k.org>
L: linux-kbuild@vger.kernel.org
S: Maintained
F: Documentation/kbuild/kconfig-language.txt
F: scripts/kconfig/
KDUMP
-P: Vivek Goyal
-M: vgoyal@redhat.com
-P: Haren Myneni
-M: hbabu@us.ibm.com
+M: Vivek Goyal <vgoyal@redhat.com>
+M: Haren Myneni <hbabu@us.ibm.com>
L: kexec@lists.infradead.org
W: http://lse.sourceforge.net/kdump/
S: Maintained
F: Documentation/kdump/
KERNEL AUTOMOUNTER (AUTOFS)
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: "H. Peter Anvin" <hpa@zytor.com>
L: autofs@linux.kernel.org
S: Odd Fixes
F: fs/autofs/
KERNEL AUTOMOUNTER v4 (AUTOFS4)
-P: Ian Kent
-M: raven@themaw.net
+M: Ian Kent <raven@themaw.net>
L: autofs@linux.kernel.org
S: Maintained
F: fs/autofs4/
KERNEL BUILD
-P: Sam Ravnborg
-M: sam@ravnborg.org
+M: Sam Ravnborg <sam@ravnborg.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
L: linux-kbuild@vger.kernel.org
@@ -3329,16 +2901,13 @@
F: scripts/Makefile.*
KERNEL JANITORS
-P: Several
L: kernel-janitors@vger.kernel.org
W: http://www.kerneljanitors.org/
-S: Maintained
+S: Odd fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
-P: J. Bruce Fields
-M: bfields@fieldses.org
-P: Neil Brown
-M: neilb@suse.de
+M: "J. Bruce Fields" <bfields@fieldses.org>
+M: Neil Brown <neilb@suse.de>
L: linux-nfs@vger.kernel.org
W: http://nfs.sourceforge.net/
S: Supported
@@ -3351,8 +2920,7 @@
F: include/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-P: Avi Kivity
-M: avi@redhat.com
+M: Avi Kivity <avi@redhat.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
@@ -3363,8 +2931,7 @@
F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
-P: Joerg Roedel
-M: joerg.roedel@amd.com
+M: Joerg Roedel <joerg.roedel@amd.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
@@ -3373,8 +2940,7 @@
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-P: Hollis Blanchard
-M: hollisb@us.ibm.com
+M: Hollis Blanchard <hollisb@us.ibm.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
@@ -3382,8 +2948,7 @@
F: arch/powerpc/kvm/
KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
-P: Xiantao Zhang
-M: xiantao.zhang@intel.com
+M: Xiantao Zhang <xiantao.zhang@intel.com>
L: kvm-ia64@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
@@ -3392,10 +2957,8 @@
F: arch/ia64/kvm/
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-P: Carsten Otte
-M: cotte@de.ibm.com
-P: Christian Borntraeger
-M: borntraeger@de.ibm.com
+M: Carsten Otte <cotte@de.ibm.com>
+M: Christian Borntraeger <borntraeger@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -3405,8 +2968,7 @@
F: arch/s390/kvm/
KEXEC
-P: Eric Biederman
-M: ebiederm@xmission.com
+M: Eric Biederman <ebiederm@xmission.com>
W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
L: kexec@lists.infradead.org
S: Maintained
@@ -3414,8 +2976,7 @@
F: kernel/kexec.c
KGDB
-P: Jason Wessel
-M: jason.wessel@windriver.com
+M: Jason Wessel <jason.wessel@windriver.com>
L: kgdb-bugreport@lists.sourceforge.net
S: Maintained
F: Documentation/DocBook/kgdb.tmpl
@@ -3425,17 +2986,13 @@
F: kernel/kgdb.c
KMEMCHECK
-P: Vegard Nossum
-M: vegardno@ifi.uio.no
+M: Vegard Nossum <vegardno@ifi.uio.no>
P Pekka Enberg
M: penberg@cs.helsinki.fi
-L: linux-kernel@vger.kernel.org
S: Maintained
KMEMLEAK
-P: Catalin Marinas
-M: catalin.marinas@arm.com
-L: linux-kernel@vger.kernel.org
+M: Catalin Marinas <catalin.marinas@arm.com>
S: Maintained
F: Documentation/kmemleak.txt
F: include/linux/kmemleak.h
@@ -3443,30 +3000,24 @@
F: mm/kmemleak-test.c
KMEMTRACE
-P: Eduard - Gabriel Munteanu
-M: eduard.munteanu@linux360.ro
+M: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
S: Maintained
F: Documentation/trace/kmemtrace.txt
F: include/linux/kmemtrace.h
F: kernel/trace/kmemtrace.c
KPROBES
-P: Ananth N Mavinakayanahalli
-M: ananth@in.ibm.com
-P: Anil S Keshavamurthy
-M: anil.s.keshavamurthy@intel.com
-P: David S. Miller
-M: davem@davemloft.net
-P: Masami Hiramatsu
-M: mhiramat@redhat.com
+M: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+M: "David S. Miller" <davem@davemloft.net>
+M: Masami Hiramatsu <mhiramat@redhat.com>
S: Maintained
F: Documentation/kprobes.txt
F: include/linux/kprobes.h
F: kernel/kprobes.c
KS0108 LCD CONTROLLER DRIVER
-P: Miguel Ojeda Sandonis
-M: miguel.ojeda.sandonis@gmail.com
+M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
@@ -3482,31 +3033,27 @@
F: net/lapb/
LASI 53c700 driver for PARISC
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/53c700.txt
F: drivers/scsi/53c700*
LED SUBSYSTEM
-P: Richard Purdie
-M: rpurdie@rpsys.net
+M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
F: drivers/leds/
F: include/linux/leds.h
LEGO USB Tower driver
-P: Juergen Stuber
-M: starblue@users.sourceforge.net
+M: Juergen Stuber <starblue@users.sourceforge.net>
L: legousb-devel@lists.sourceforge.net
W: http://legousb.sourceforge.net/
S: Maintained
F: drivers/usb/misc/legousbtower.c
LGUEST
-P: Rusty Russell
-M: rusty@rustcorp.com.au
+M: Rusty Russell <rusty@rustcorp.com.au>
L: lguest@ozlabs.org
W: http://lguest.ozlabs.org/
S: Maintained
@@ -3517,119 +3064,100 @@
F: arch/x86/include/asm/lguest*.h
LINUX FOR IBM pSERIES (RS/6000)
-P: Paul Mackerras
-M: paulus@au.ibm.com
+M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.ibm.com/linux/ltc/projects/ppc
S: Supported
LINUX FOR POWERPC (32-BIT AND 64-BIT)
-P: Benjamin Herrenschmidt
-M: benh@kernel.crashing.org
-P: Paul Mackerras
-M: paulus@samba.org
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M: Paul Mackerras <paulus@samba.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
S: Supported
LINUX FOR POWER MACINTOSH
-P: Benjamin Herrenschmidt
-M: benh@kernel.crashing.org
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
-P: Grant Likely
-M: grant.likely@secretlab.ca
+M: Grant Likely <grant.likely@secretlab.ca>
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
-P: Josh Boyer
-M: jwboyer@linux.vnet.ibm.com
-P: Matt Porter
-M: mporter@kernel.crashing.org
+M: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-P: Grant Likely
-M: grant.likely@secretlab.ca
+M: Grant Likely <grant.likely@secretlab.ca>
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
-P: Vitaly Bordug
-M: vitb@kernel.crashing.org
-P: Marcelo Tosatti
-M: marcelo@kvack.org
+M: Vitaly Bordug <vitb@kernel.crashing.org>
+M: Marcelo Tosatti <marcelo@kvack.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
-P: Kumar Gala
-M: galak@kernel.crashing.org
+M: Kumar Gala <galak@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC PA SEMI PWRFICIENT
-P: Olof Johansson
-M: olof@lixom.net
+M: Olof Johansson <olof@lixom.net>
W: http://www.pasemi.com/
L: linuxppc-dev@ozlabs.org
S: Supported
LINUX SECURITY MODULE (LSM) FRAMEWORK
-P: Chris Wright
-M: chrisw@sous-sol.org
+M: Chris Wright <chrisw@sous-sol.org>
L: linux-security-module@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
LLC (802.2)
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
S: Maintained
F: include/linux/llc.h
F: include/net/llc*
F: net/llc/
LIS3LV02D ACCELEROMETER DRIVER
-P: Eric Piel
-M: eric.piel@tremplin-utc.net
+M: Eric Piel <eric.piel@tremplin-utc.net>
S: Maintained
F: Documentation/hwmon/lis3lv02d
F: drivers/hwmon/lis3lv02d.*
LM83 HARDWARE MONITOR DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm83
F: drivers/hwmon/lm83.c
LM90 HARDWARE MONITOR DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm90
F: drivers/hwmon/lm90.c
LOCKDEP AND LOCKSTAT
-P: Peter Zijlstra
-M: peterz@infradead.org
-P: Ingo Molnar
-M: mingo@redhat.com
+M: Peter Zijlstra <peterz@infradead.org>
+M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
S: Maintained
F: Documentation/lockdep*.txt
@@ -3638,8 +3166,7 @@
F: kernel/lockdep*
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
-P: Richard Russon (FlatCap)
-M: ldm@flatcap.org
+M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
@@ -3647,8 +3174,7 @@
F: fs/partitions/ldm.*
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-P: Eric Moore
-M: Eric.Moore@lsi.com
+M: Eric Moore <Eric.Moore@lsi.com>
M: support@lsi.com
L: DL-MPTFusionLinux@lsi.com
L: linux-scsi@vger.kernel.org
@@ -3657,25 +3183,21 @@
F: drivers/message/fusion/
LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
-P: Matthew Wilcox
-M: matthew@wil.cx
+M: Matthew Wilcox <matthew@wil.cx>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
-P: Subrata Modak
-M: subrata@linux.vnet.ibm.com
-P: Mike Frysinger
-M: vapier@gentoo.org
+M: Subrata Modak <subrata@linux.vnet.ibm.com>
+M: Mike Frysinger <vapier@gentoo.org>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
S: Maintained
M32R ARCHITECTURE
-P: Hirokazu Takata
-M: takata@linux-m32r.org
+M: Hirokazu Takata <takata@linux-m32r.org>
L: linux-m32r@ml.linux-m32r.org
L: linux-m32r-ja@ml.linux-m32r.org (in Japanese)
W: http://www.linux-m32r.org/
@@ -3683,10 +3205,8 @@
F: arch/m32r/
M68K ARCHITECTURE
-P: Geert Uytterhoeven
-M: geert@linux-m68k.org
-P: Roman Zippel
-M: zippel@linux-m68k.org
+M: Geert Uytterhoeven <geert@linux-m68k.org>
+M: Roman Zippel <zippel@linux-m68k.org>
L: linux-m68k@lists.linux-m68k.org
W: http://www.linux-m68k.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -3695,23 +3215,20 @@
F: drivers/zorro/
M68K ON APPLE MACINTOSH
-P: Joshua Thompson
-M: funaho@jurai.org
+M: Joshua Thompson <funaho@jurai.org>
W: http://www.mac.linux-m68k.org/
L: linux-m68k@lists.linux-m68k.org
S: Maintained
F: arch/m68k/mac/
M68K ON HP9000/300
-P: Philip Blundell
-M: philb@gnu.org
+M: Philip Blundell <philb@gnu.org>
W: http://www.tazenda.demon.co.uk/phil/linux-hp
S: Maintained
F: arch/m68k/hp300/
MAC80211
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3721,10 +3238,8 @@
F: net/mac80211/
MAC80211 PID RATE CONTROL
-P: Stefano Brivio
-M: stefano.brivio@polimi.it
-P: Mattias Nissler
-M: mattias.nissler@gmx.de
+M: Stefano Brivio <stefano.brivio@polimi.it>
+M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3732,67 +3247,57 @@
F: net/mac80211/rc80211_pid*
MACVLAN DRIVER
-P: Patrick McHardy
-M: kaber@trash.net
+M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/macvlan.c
F: include/linux/if_macvlan.h
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
+M: Michael Kerrisk <mtk.manpages@gmail.com>
W: http://www.kernel.org/doc/man-pages
L: linux-man@vger.kernel.org
S: Maintained
MARVELL LIBERTAS WIRELESS DRIVER
-P: Dan Williams
-M: dcbw@redhat.com
+M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
S: Maintained
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
-P: Lennert Buytenhek
-M: buytenh@marvell.com
+M: Lennert Buytenhek <buytenh@marvell.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/mv643xx_eth.*
F: include/linux/mv643xx.h
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-P: Nicolas Pitre
-M: nico@cam.org
+M: Nicolas Pitre <nico@cam.org>
S: Maintained
MARVELL YUKON / SYSKONNECT DRIVER
-P: Mirko Lindner
-M: mlindner@syskonnect.de
-P: Ralph Roesler
-M: rroesler@syskonnect.de
+M: Mirko Lindner <mlindner@syskonnect.de>
+M: Ralph Roesler <rroesler@syskonnect.de>
W: http://www.syskonnect.com
S: Supported
MATROX FRAMEBUFFER DRIVER
-P: Petr Vandrovec
-M: vandrove@vc.cvut.cz
+M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P: Hans J. Koch
-M: hjk@linutronix.de
+M: "Hans J. Koch" <hjk@linutronix.de>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-P: Mauro Carvalho Chehab
-M: mchehab@infradead.org
+M: Mauro Carvalho Chehab <mchehab@infradead.org>
P: LinuxTV.org Project
L: linux-media@vger.kernel.org
W: http://linuxtv.org
@@ -3806,8 +3311,7 @@
F: include/linux/videodev*.h
MEGARAID SCSI DRIVERS
-P: Neela Syam Kolli
-M: megaraidlinux@lsi.com
+M: Neela Syam Kolli <megaraidlinux@lsi.com>
L: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
@@ -3823,19 +3327,15 @@
F: mm/
MEMORY RESOURCE CONTROLLER
-P: Balbir Singh
-M: balbir@linux.vnet.ibm.com
-P: Pavel Emelyanov
-M: xemul@openvz.org
-P: KAMEZAWA Hiroyuki
-M: kamezawa.hiroyu@jp.fujitsu.com
+M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Pavel Emelyanov <xemul@openvz.org>
+M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
MEMORY TECHNOLOGY DEVICES (MTD)
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: David Woodhouse <dwmw2@infradead.org>
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/mtd-2.6.git
@@ -3845,8 +3345,7 @@
F: include/mtd/
MICROBLAZE ARCHITECTURE
-P: Michal Simek
-M: monstr@monstr.eu
+M: Michal Simek <monstr@monstr.eu>
L: microblaze-uclinux@itee.uq.edu.au
W: http://www.monstr.eu/fdt/
T: git git://git.monstr.eu/linux-2.6-microblaze.git
@@ -3854,14 +3353,12 @@
F: arch/microblaze/
MICROTEK X6 SCANNER
-P: Oliver Neukum
-M: oliver@neukum.name
+M: Oliver Neukum <oliver@neukum.name>
S: Maintained
F: drivers/usb/image/microtek.*
MIPS
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
T: git git://git.linux-mips.org/pub/scm/linux.git
@@ -3870,8 +3367,7 @@
F: arch/mips/
MISCELLANEOUS MCA-SUPPORT
-P: James Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: James Bottomley <James.Bottomley@HansenPartnership.com>
S: Maintained
F: Documentation/ia64/mca.txt
F: Documentation/mca.txt
@@ -3879,15 +3375,13 @@
F: include/linux/mca*
MODULE SUPPORT
-P: Rusty Russell
-M: rusty@rustcorp.com.au
+M: Rusty Russell <rusty@rustcorp.com.au>
S: Maintained
F: include/linux/module.h
F: kernel/module.c
MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-P: Stelian Pop
-M: stelian@popies.net
+M: Stelian Pop <stelian@popies.net>
W: http://popies.net/meye/
S: Maintained
F: Documentation/video4linux/meye.txt
@@ -3895,135 +3389,111 @@
F: include/linux/meye.h
MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P: Pavel Pisa
-M: ppisa@pikron.com
+M: Pavel Pisa <ppisa@pikron.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: drivers/mmc/host/imxmmc.*
MOUSE AND MISC DEVICES [GENERAL]
-P: Alessandro Rubini
-M: rubini@ipvvis.unipv.it
+M: Alessandro Rubini <rubini@ipvvis.unipv.it>
S: Maintained
F: drivers/input/mouse/
F: include/linux/gpio_mouse.h
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
-P: Jiri Slaby
-M: jirislaby@gmail.com
+M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: Documentation/serial/moxa-smartio
F: drivers/char/mxser.*
MSI LAPTOP SUPPORT
-P: Lennart Poettering
-M: mzxreary@0pointer.de
+M: Lennart Poettering <mzxreary@0pointer.de>
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
F: drivers/platform/x86/msi-laptop.c
MULTIFUNCTION DEVICES (MFD)
-P: Samuel Ortiz
-M: sameo@linux.intel.com
+M: Samuel Ortiz <sameo@linux.intel.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
S: Supported
F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-P: Pierre Ossman
-M: pierre@ossman.eu
-S: Maintained
+S: Orphan
F: drivers/mmc/
F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
S: Odd Fixes
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
MULTISOUND SOUND DRIVER
-P: Andrew Veliath
-M: andrewtv@usa.net
+M: Andrew Veliath <andrewtv@usa.net>
S: Maintained
F: Documentation/sound/oss/MultiSound
F: sound/oss/msnd*
MULTITECH MULTIPORT CARD (ISICOM)
-P: Jiri Slaby
-M: jirislaby@gmail.com
+M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: drivers/char/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
+M: Felipe Balbi <felipe.balbi@nokia.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/musb/mainline.git
S: Maintained
F: drivers/usb/musb/
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-P: Andrew Gallatin
-M: gallatin@myri.com
-P: Brice Goglin
-M: brice@myri.com
+M: Andrew Gallatin <gallatin@myri.com>
+M: Brice Goglin <brice@myri.com>
L: netdev@vger.kernel.org
W: http://www.myri.com/scs/download-Myri10GE.html
S: Supported
F: drivers/net/myri10ge/
NATSEMI ETHERNET DRIVER (DP8381x)
-P: Tim Hockin
-M: thockin@hockin.org
+M: Tim Hockin <thockin@hockin.org>
S: Maintained
F: drivers/net/natsemi.c
NCP FILESYSTEM
-P: Petr Vandrovec
-M: vandrove@vc.cvut.cz
+M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linware@sh.cvut.cz
S: Maintained
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/NCR_D700.*
NETEFFECT IWARP RNIC DRIVER (IW_NES)
-P: Faisal Latif
-M: faisal.latif@intel.com
-P: Chien Tung
-M: chien.tin.tung@intel.com
+M: Faisal Latif <faisal.latif@intel.com>
+M: Chien Tung <chien.tin.tung@intel.com>
L: general@lists.openfabrics.org
W: http://www.neteffect.com
S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
-P: Stephen Hemminger
-M: shemminger@linux-foundation.org
+M: Stephen Hemminger <shemminger@linux-foundation.org>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-P: Ramkrishna Vepa
-M: ram.vepa@neterion.com
-P: Rastapur Santosh
-M: santosh.rastapur@neterion.com
-P: Sivakumar Subramani
-M: sivakumar.subramani@neterion.com
-P: Sreenivasa Honnur
-M: sreenivasa.honnur@neterion.com
-P: Anil Murthy
-M: anil.murthy@neterion.com
+M: Ramkrishna Vepa <ram.vepa@neterion.com>
+M: Rastapur Santosh <santosh.rastapur@neterion.com>
+M: Sivakumar Subramani <sivakumar.subramani@neterion.com>
+M: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+M: Anil Murthy <anil.murthy@neterion.com>
L: netdev@vger.kernel.org
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -4037,13 +3507,13 @@
P: James Morris
P: Harald Welte
P: Jozsef Kadlecsik
-P: Patrick McHardy
-M: kaber@trash.net
+M: Patrick McHardy <kaber@trash.net>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
+T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
@@ -4053,8 +3523,7 @@
F: net/netfilter/
NETLABEL
-P: Paul Moore
-M: paul.moore@hp.com
+M: Paul Moore <paul.moore@hp.com>
W: http://netlabel.sf.net
L: netdev@vger.kernel.org
S: Supported
@@ -4063,8 +3532,7 @@
F: net/netlabel/
NETROM NETWORK LAYER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
@@ -4073,16 +3541,14 @@
F: net/netrom/
NETWORK BLOCK DEVICE (NBD)
-P: Paul Clements
-M: Paul.Clements@steeleye.com
+M: Paul Clements <Paul.Clements@steeleye.com>
S: Maintained
F: Documentation/blockdev/nbd.txt
F: drivers/block/nbd.c
F: include/linux/nbd.h
NETWORKING [GENERAL]
-P: David S. Miller
-M: davem@davemloft.net
+M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
@@ -4091,18 +3557,12 @@
F: include/net/
NETWORKING [IPv4/IPv6]
-P: David S. Miller
-M: davem@davemloft.net
-P: Alexey Kuznetsov
-M: kuznet@ms2.inr.ac.ru
-P: Pekka Savola (ipv6)
-M: pekkas@netcore.fi
-P: James Morris
-M: jmorris@namei.org
-P: Hideaki YOSHIFUJI
-M: yoshfuji@linux-ipv6.org
-P: Patrick McHardy
-M: kaber@trash.net
+M: "David S. Miller" <davem@davemloft.net>
+M: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
+M: James Morris <jmorris@namei.org>
+M: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
@@ -4111,14 +3571,12 @@
F: include/net/ip*
NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-P: Paul Moore
-M: paul.moore@hp.com
+M: Paul Moore <paul.moore@hp.com>
L: netdev@vger.kernel.org
S: Maintained
NETWORKING [WIRELESS]
-P: John W. Linville
-M: linville@tuxdriver.com
+M: "John W. Linville" <linville@tuxdriver.com>
L: linux-wireless@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
@@ -4134,16 +3592,14 @@
F: drivers/net/
NETXEN (1/10) GbE SUPPORT
-P: Dhananjay Phadke
-M: dhananjay@netxen.com
+M: Dhananjay Phadke <dhananjay@netxen.com>
L: netdev@vger.kernel.org
W: http://www.netxen.com
S: Supported
F: drivers/net/netxen/
NFS, SUNRPC, AND LOCKD CLIENTS
-P: Trond Myklebust
-M: Trond.Myklebust@netapp.com
+M: Trond Myklebust <Trond.Myklebust@netapp.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
@@ -4157,17 +3613,14 @@
F: include/linux/sunrpc/
NI5010 NETWORK DRIVER
-P: Jan-Pascal van Best
-M: janpascal@vanbest.org
-P: Andreas Mohr
-M: andi@lisas.de
+M: Jan-Pascal van Best <janpascal@vanbest.org>
+M: Andreas Mohr <andi@lisas.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ni5010.*
NILFS2 FILESYSTEM
-P: KONISHI Ryusuke
-M: konishi.ryusuke@lab.ntt.co.jp
+M: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
L: users@nilfs.org
W: http://www.nilfs.org/en/
S: Supported
@@ -4176,26 +3629,22 @@
F: include/linux/nilfs2_fs.h
NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
-P: YOKOTA Hiroshi
-M: yokota@netlab.is.tsukuba.ac.jp
+M: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
F: Documentation/scsi/NinjaSCSI.txt
F: drivers/scsi/pcmcia/nsp_*
NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
-P: GOTO Masanori
-M: gotom@debian.or.jp
-P: YOKOTA Hiroshi
-M: yokota@netlab.is.tsukuba.ac.jp
+M: GOTO Masanori <gotom@debian.or.jp>
+M: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
F: Documentation/scsi/NinjaSCSI.txt
F: drivers/scsi/nsp32*
NTFS FILESYSTEM
-P: Anton Altaparmakov
-M: aia21@cantab.net
+M: Anton Altaparmakov <aia21@cantab.net>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
@@ -4204,16 +3653,14 @@
F: fs/ntfs/
NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
-P: Antonino Daplas
-M: adaplas@gmail.com
+M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/riva/
F: drivers/video/nvidia/
OMAP SUPPORT
-P: Tony Lindgren <tony@atomide.com>
-M: tony@atomide.com
+M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
L: linux-omap@vger.kernel.org
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
@@ -4222,98 +3669,83 @@
F: arch/arm/*omap*
OMAP CLOCK FRAMEWORK SUPPORT
-P: Paul Walmsley
-M: paul@pwsan.com
+M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*clock*
OMAP POWER MANAGEMENT SUPPORT
-P: Kevin Hilman
-M: khilman@deeprootsystems.com
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
OMAP AUDIO SUPPORT
-P: Jarkko Nikula
-M: jhnikula@gmail.com
+M: Jarkko Nikula <jhnikula@gmail.com>
L: alsa-devel@alsa-project.org (subscribers-only)
L: linux-omap@vger.kernel.org
S: Maintained
F: sound/soc/omap/
OMAP FRAMEBUFFER SUPPORT
-P: Imre Deak
-M: imre.deak@nokia.com
+M: Imre Deak <imre.deak@nokia.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/video/omap/
OMAP MMC SUPPORT
-P: Jarkko Lavinen
-M: jarkko.lavinen@nokia.com
-L: linux-kernel@vger.kernel.org
+M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/mmc/host/*omap*
OMAP RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
+M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/omap-rng.c
OMAP USB SUPPORT
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: Felipe Balbi <felipe.balbi@nokia.com>
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
OMFS FILESYSTEM
-P: Bob Copeland
-M: me@bobcopeland.com
+M: Bob Copeland <me@bobcopeland.com>
L: linux-karma-devel@lists.sourceforge.net
S: Maintained
F: Documentation/filesystems/omfs.txt
F: fs/omfs/
OMNIKEY CARDMAN 4000 DRIVER
-P: Harald Welte
-M: laforge@gnumonks.org
+M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/char/pcmcia/cm4000_cs.c
F: include/linux/cm4000_cs.h
OMNIKEY CARDMAN 4040 DRIVER
-P: Harald Welte
-M: laforge@gnumonks.org
+M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/char/pcmcia/cm4040_cs.*
OMNIVISION OV7670 SENSOR DRIVER
-P: Jonathan Corbet
-M: corbet@lwn.net
+M: Jonathan Corbet <corbet@lwn.net>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: drivers/media/video/ov7670.c
ONENAND FLASH DRIVER
-P: Kyungmin Park
-M: kyungmin.park@samsung.com
+M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/onenand/
F: include/linux/mtd/onenand*.h
ONSTREAM SCSI TAPE DRIVER
-P: Willem Riede
-M: osst@riede.org
+M: Willem Riede <osst@riede.org>
L: osst-users@lists.sourceforge.net
L: linux-scsi@vger.kernel.org
S: Maintained
@@ -4321,16 +3753,14 @@
F: drivers/scsi/st*
OPENCORES I2C BUS DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
OPROFILE
-P: Robert Richter
-M: robert.richter@amd.com
+M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
S: Maintained
F: arch/*/oprofile/
@@ -4338,10 +3768,8 @@
F: include/linux/oprofile.h
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-P: Mark Fasheh
-M: mfasheh@suse.com
-P: Joel Becker
-M: joel.becker@oracle.com
+M: Mark Fasheh <mfasheh@suse.com>
+M: Joel Becker <joel.becker@oracle.com>
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
@@ -4351,10 +3779,8 @@
F: fs/ocfs2/
ORINOCO DRIVER
-P: Pavel Roskin
-M: proski@gnu.org
-P: David Gibson
-M: hermes@gibson.dropbear.id.au
+M: Pavel Roskin <proski@gnu.org>
+M: David Gibson <hermes@gibson.dropbear.id.au>
L: linux-wireless@vger.kernel.org
L: orinoco-users@lists.sourceforge.net
L: orinoco-devel@lists.sourceforge.net
@@ -4362,19 +3788,19 @@
S: Maintained
F: drivers/net/wireless/orinoco/
-OSD LIBRARY
-P: Boaz Harrosh
-M: bharrosh@panasas.com
-P: Benny Halevy
-M: bhalevy@panasas.com
+OSD LIBRARY and FILESYSTEM
+M: Boaz Harrosh <bharrosh@panasas.com>
+M: Benny Halevy <bhalevy@panasas.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
S: Maintained
+F: drivers/scsi/osd/
+F: drivers/include/scsi/osd_*
+F: fs/exofs/
P54 WIRELESS DRIVER
-P: Michael Wu
-M: flamingice@sourmilk.net
+M: Michael Wu <flamingice@sourmilk.net>
L: linux-wireless@vger.kernel.org
W: http://prism54.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -4382,30 +3808,25 @@
F: drivers/net/wireless/p54/
PA SEMI ETHERNET DRIVER
-P: Olof Johansson
-M: olof@lixom.net
+M: Olof Johansson <olof@lixom.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pasemi_mac.*
PA SEMI SMBUS DRIVER
-P: Olof Johansson
-M: olof@lixom.net
+M: Olof Johansson <olof@lixom.net>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-pasemi.c
PANASONIC LAPTOP ACPI EXTRAS DRIVER
-P: Harald Welte
-M: laforge@gnumonks.org
+M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
PANASONIC MN10300/AM33 PORT
-P: David Howells
-M: dhowells@redhat.com
-P: Koichi Yasutake
-M: yasutake.koichi@jp.panasonic.com
+M: David Howells <dhowells@redhat.com>
+M: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
L: linux-am33-list@redhat.com (moderated for non-subscribers)
W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
S: Maintained
@@ -4421,14 +3842,10 @@
F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
-P: Jeremy Fitzhardinge
-M: jeremy@xensource.com
-P: Chris Wright
-M: chrisw@sous-sol.org
-P: Alok Kataria
-M: akataria@vmware.com
-P: Rusty Russell
-M: rusty@rustcorp.com.au
+M: Jeremy Fitzhardinge <jeremy@xensource.com>
+M: Chris Wright <chrisw@sous-sol.org>
+M: Alok Kataria <akataria@vmware.com>
+M: Rusty Russell <rusty@rustcorp.com.au>
L: virtualization@lists.osdl.org
S: Supported
F: Documentation/ia64/paravirt_ops.txt
@@ -4436,8 +3853,7 @@
F: arch/*/include/asm/paravirt.h
PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
-P: Tim Waugh
-M: tim@cyberelk.net
+M: Tim Waugh <tim@cyberelk.net>
L: linux-parport@lists.infradead.org (subscribers-only)
W: http://www.torque.net/linux-pp.html
S: Maintained
@@ -4445,10 +3861,8 @@
F: drivers/block/paride/
PARISC ARCHITECTURE
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Helge Deller
-M: deller@gmx.de
+M: Kyle McMartin <kyle@mcmartin.ca>
+M: Helge Deller <deller@gmx.de>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4457,37 +3871,32 @@
F: drivers/parisc/
PC87360 HARDWARE MONITORING DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/pc87360
F: drivers/hwmon/pc87360.c
PC8736x GPIO DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Maintained
F: drivers/char/pc8736x_gpio.c
PCA9532 LED DRIVER
-P: Riku Voipio
-M: riku.voipio@iki.fi
+M: Riku Voipio <riku.voipio@iki.fi>
S: Maintained
F: drivers/leds/leds-pca9532.c
F: include/linux/leds-pca9532.h
PCI ERROR RECOVERY
-P: Linas Vepstas
-M: linas@austin.ibm.com
+M: Linas Vepstas <linas@austin.ibm.com>
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/PCI/pci-error-recovery.txt
F: Documentation/powerpc/eeh-pci-error-recovery.txt
PCI SUBSYSTEM
-P: Jesse Barnes
-M: jbarnes@virtuousgeek.org
+M: Jesse Barnes <jbarnes@virtuousgeek.org>
L: linux-pci@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
@@ -4496,8 +3905,7 @@
F: include/linux/pci*
PCIE HOTPLUG DRIVER
-P: Kristen Carlson Accardi
-M: kristen.c.accardi@intel.com
+M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/pcie/
@@ -4513,121 +3921,103 @@
F: include/pcmcia/
PCNET32 NETWORK DRIVER
-P: Don Fry
-M: pcnet32@verizon.net
+M: Don Fry <pcnet32@verizon.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pcnet32.c
PER-TASK DELAY ACCOUNTING
-P: Balbir Singh
-M: balbir@linux.vnet.ibm.com
+M: Balbir Singh <balbir@linux.vnet.ibm.com>
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
PERFORMANCE COUNTER SUBSYSTEM
-P: Peter Zijlstra
-M: a.p.zijlstra@chello.nl
-P: Paul Mackerras
-M: paulus@samba.org
-P: Ingo Molnar
-M: mingo@elte.hu
-L: linux-kernel@vger.kernel.org
+M: Peter Zijlstra <a.p.zijlstra@chello.nl>
+M: Paul Mackerras <paulus@samba.org>
+M: Ingo Molnar <mingo@elte.hu>
S: Supported
PERSONALITY HANDLING
-P: Christoph Hellwig
-M: hch@infradead.org
+M: Christoph Hellwig <hch@infradead.org>
L: linux-abi-devel@lists.sourceforge.net
S: Maintained
F: include/linux/personality.h
PHRAM MTD DRIVER
-P: Joern Engel
-M: joern@lazybastard.org
+M: Joern Engel <joern@lazybastard.org>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/phram.c
PKTCDVD DRIVER
-P: Peter Osterlund
-M: petero2@telia.com
+M: Peter Osterlund <petero2@telia.com>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
POSIX CLOCKS and TIMERS
-P: Thomas Gleixner
-M: tglx@linutronix.de
+M: Thomas Gleixner <tglx@linutronix.de>
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
F: kernel/*timer*
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-P: Anton Vorontsov
-M: cbou@mail.ru
-P: David Woodhouse
-M: dwmw2@infradead.org
+M: Anton Vorontsov <cbou@mail.ru>
+M: David Woodhouse <dwmw2@infradead.org>
T: git git://git.infradead.org/battery-2.6.git
S: Maintained
F: include/linux/power_supply.h
F: drivers/power/power_supply*
PNP SUPPORT
-P: Adam Belay
-M: abelay@mit.edu
-P: Bjorn Helgaas
-M: bjorn.helgaas@hp.com
+M: Adam Belay <abelay@mit.edu>
+M: Bjorn Helgaas <bjorn.helgaas@hp.com>
S: Maintained
F: drivers/pnp/
PNXxxxx I2C DRIVER
-P: Vitaly Wool
-M: vitalywool@gmail.com
+M: Vitaly Wool <vitalywool@gmail.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-pnx.c
PPP PROTOCOL DRIVERS AND COMPRESSORS
-P: Paul Mackerras
-M: paulus@samba.org
+M: Paul Mackerras <paulus@samba.org>
L: linux-ppp@vger.kernel.org
S: Maintained
F: drivers/net/ppp_*
PPP OVER ATM (RFC 2364)
-P: Mitchell Blank Jr
-M: mitch@sfgoth.com
+M: Mitchell Blank Jr <mitch@sfgoth.com>
S: Maintained
F: net/atm/pppoatm.c
F: include/linux/atmppp.h
PPP OVER ETHERNET
-P: Michal Ostrowski
-M: mostrows@earthlink.net
+M: Michal Ostrowski <mostrows@earthlink.net>
S: Maintained
F: drivers/net/pppoe.c
F: drivers/net/pppox.c
PPP OVER L2TP
-P: James Chapman
-M: jchapman@katalix.com
+M: James Chapman <jchapman@katalix.com>
S: Maintained
F: drivers/net/pppol2tp.c
F: include/linux/if_pppol2tp.h
PPS SUPPORT
-P: Rodolfo Giometti
-M: giometti@enneenne.com
+M: Rodolfo Giometti <giometti@enneenne.com>
W: http://wiki.enneenne.com/index.php/LinuxPPS_support
L: linuxpps@ml.enneenne.com (subscribers-only)
S: Maintained
+F: Documentation/pps/
+F: drivers/pps/
+F: include/linux/pps*.h
PREEMPTIBLE KERNEL
-P: Robert Love
-M: rml@tech9.net
+M: Robert Love <rml@tech9.net>
L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
@@ -4635,37 +4025,32 @@
F: include/linux/preempt.h
PRISM54 WIRELESS DRIVER
-P: Luis R. Rodriguez
-M: mcgrof@gmail.com
+M: "Luis R. Rodriguez" <mcgrof@gmail.com>
L: linux-wireless@vger.kernel.org
W: http://prism54.org
S: Maintained
F: drivers/net/wireless/prism54/
PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-P: Peter Denison
-M: promise@pnd-pc.demon.co.uk
+M: Peter Denison <promise@pnd-pc.demon.co.uk>
W: http://www.pnd-pc.demon.co.uk/promise/
S: Maintained
PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-P: Mikael Pettersson
-M: mikpe@it.uu.se
+M: Mikael Pettersson <mikpe@it.uu.se>
L: linux-ide@vger.kernel.org
S: Maintained
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
-P: Geoff Levand
-M: geoffrey.levand@am.sony.com
+M: Geoff Levand <geoffrey.levand@am.sony.com>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
S: Supported
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
-P: Geoff Levand
-M: geoffrey.levand@am.sony.com
+M: Geoff Levand <geoffrey.levand@am.sony.com>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
S: Supported
@@ -4680,16 +4065,13 @@
F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
-P: Jim Paris
-M: jim@jtan.com
+M: Jim Paris <jim@jtan.com>
L: cbe-oss-dev@ozlabs.org
S: Maintained
PTRACE SUPPORT
-P: Roland McGrath
-M: roland@redhat.com
-P: Oleg Nesterov
-M: oleg@redhat.com
+M: Roland McGrath <roland@redhat.com>
+M: Oleg Nesterov <oleg@redhat.com>
S: Maintained
F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
@@ -4698,8 +4080,7 @@
F: kernel/ptrace.c
PVRUSB2 VIDEO4LINUX DRIVER
-P: Mike Isely
-M: isely@pobox.com
+M: Mike Isely <isely@pobox.com>
L: pvrusb2@isely.net (subscribers-only)
L: linux-media@vger.kernel.org
W: http://www.isely.net/pvrusb2/
@@ -4709,10 +4090,8 @@
F: drivers/media/video/pvrusb2/
PXA2xx/PXA3xx SUPPORT
-P: Eric Miao
-M: eric.y.miao@gmail.com
-P: Russell King
-M: linux@arm.linux.org.uk
+M: Eric Miao <eric.y.miao@gmail.com>
+M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mach-pxa/
@@ -4724,17 +4103,14 @@
F: sound/soc/pxa
PXA168 SUPPORT
-P: Eric Miao
-M: eric.y.miao@gmail.com
-P: Jason Chagas
-M: jason.chagas@marvell.com
+M: Eric Miao <eric.y.miao@gmail.com>
+M: Jason Chagas <jason.chagas@marvell.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Maintained
PXA910 SUPPORT
-P: Eric Miao
-M: eric.y.miao@gmail.com
+M: Eric Miao <eric.y.miao@gmail.com>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Maintained
@@ -4743,13 +4119,12 @@
S: Orphan
PXA RTC DRIVER
-P: Robert Jarzmik
-M: robert.jarzmik@free.fr
+M: Robert Jarzmik <robert.jarzmik@free.fr>
L: rtc-linux@googlegroups.com
S: Maintained
QLOGIC QLA2XXX FC-SCSI DRIVER
-P: Andrew Vasquez
+M: Andrew Vasquez <andrew.vasquez@qlogic.com>
M: linux-driver@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
@@ -4757,7 +4132,7 @@
F: drivers/scsi/qla2xxx/
QLOGIC QLA3XXX NETWORK DRIVER
-P: Ron Mercer
+M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
@@ -4765,16 +4140,14 @@
F: drivers/net/qla3xxx.*
QLOGIC QLGE 10Gb ETHERNET DRIVER
-P: Ron Mercer
+M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
-M: ron.mercer@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qlge/
QNX4 FILESYSTEM
-P: Anders Larsen
-M: al@alarsen.net
+M: Anders Larsen <al@alarsen.net>
W: http://www.alarsen.net/linux/qnx4fs/
S: Maintained
F: fs/qnx4/
@@ -4782,16 +4155,14 @@
F: include/linux/qnxtypes.h
RADEON FRAMEBUFFER DISPLAY DRIVER
-P: Benjamin Herrenschmidt
-M: benh@kernel.crashing.org
+M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/aty/radeon*
F: include/linux/radeonfb.h
RAGE128 FRAMEBUFFER DISPLAY DRIVER
-P: Paul Mackerras
-M: paulus@samba.org
+M: Paul Mackerras <paulus@samba.org>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/aty/aty128fb.c
@@ -4806,64 +4177,53 @@
F: drivers/net/wireless/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER
-P: Nick Piggin
-M: npiggin@suse.de
+M: Nick Piggin <npiggin@suse.de>
S: Maintained
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
RANDOM NUMBER DRIVER
-P: Matt Mackall
-M: mpm@selenic.com
+M: Matt Mackall <mpm@selenic.com>
S: Maintained
F: drivers/char/random.c
RAPIDIO SUBSYSTEM
-P: Matt Porter
-M: mporter@kernel.crashing.org
+M: Matt Porter <mporter@kernel.crashing.org>
S: Maintained
F: drivers/rapidio/
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-P: Corey Thomas
-M: coreythomas@charter.net
+M: Corey Thomas <coreythomas@charter.net>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/ray*
RCUTORTURE MODULE
-P: Josh Triplett
-M: josh@freedesktop.org
-P: Paul E. McKenney
-M: paulmck@linux.vnet.ibm.com
+M: Josh Triplett <josh@freedesktop.org>
+M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
S: Maintained
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
RDC R-321X SoC
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
-P: Andy Grover
-M: andy.grover@oracle.com
+M: Andy Grover <andy.grover@oracle.com>
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
S: Supported
F: net/rds/
READ-COPY UPDATE (RCU)
-P: Dipankar Sarma
-M: dipankar@in.ibm.com
-P: Paul E. McKenney
-M: paulmck@linux.vnet.ibm.com
+M: Dipankar Sarma <dipankar@in.ibm.com>
+M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
W: http://www.rdrop.com/users/paulmck/rclock/
S: Supported
F: Documentation/RCU/rcu.txt
@@ -4873,16 +4233,14 @@
F: kernel/rcupdate.c
REAL TIME CLOCK DRIVER
-P: Paul Gortmaker
-M: p_gortmaker@yahoo.com
+M: Paul Gortmaker <p_gortmaker@yahoo.com>
S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
F: include/linux/rtc.h
REAL TIME CLOCK (RTC) SUBSYSTEM
-P: Alessandro Zummo
-M: a.zummo@towertech.it
+M: Alessandro Zummo <a.zummo@towertech.it>
L: rtc-linux@googlegroups.com
S: Maintained
F: Documentation/rtc.txt
@@ -4895,8 +4253,7 @@
F: fs/reiserfs/
RFKILL
-P: Johannes Berg
-M: johannes@sipsolutions.net
+M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
F Documentation/rfkill.txt
@@ -4915,8 +4272,7 @@
F: drivers/char/rocket*
ROSE NETWORK LAYER
-P: Ralf Baechle
-M: ralf@linux-mips.org
+M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
@@ -4925,8 +4281,7 @@
F: net/rose/
RTL8180 WIRELESS DRIVER
-P: John W. Linville
-M: linville@tuxdriver.com
+M: "John W. Linville" <linville@tuxdriver.com>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4934,12 +4289,9 @@
F: drivers/net/wireless/rtl818*
RTL8187 WIRELESS DRIVER
-P: Herton Ronaldo Krzesinski
-M: herton@mandriva.com.br
-P: Hin-Tak Leung
-M: htl10@users.sourceforge.net
-P: Larry Finger
-M: Larry.Finger@lwfinger.net
+M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M: Hin-Tak Leung <htl10@users.sourceforge.net>
+M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4947,17 +4299,14 @@
F: drivers/net/wireless/rtl818x/rtl8187*
S3 SAVAGE FRAMEBUFFER DRIVER
-P: Antonino Daplas
-M: adaplas@gmail.com
+M: Antonino Daplas <adaplas@gmail.com>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/savage/
S390
-P: Martin Schwidefsky
-M: schwidefsky@de.ibm.com
-P: Heiko Carstens
-M: heiko.carstens@de.ibm.com
+M: Martin Schwidefsky <schwidefsky@de.ibm.com>
+M: Heiko Carstens <heiko.carstens@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -4965,10 +4314,8 @@
F: arch/s390/
S390 NETWORK DRIVERS
-P: Ursula Braun
-M: ursula.braun@de.ibm.com
-P: Frank Blaschka
-M: blaschka@linux.vnet.ibm.com
+M: Ursula Braun <ursula.braun@de.ibm.com>
+M: Frank Blaschka <blaschka@linux.vnet.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -4976,20 +4323,16 @@
F: drivers/s390/net/
S390 ZCRYPT DRIVER
-P: Felix Beck
-M: felix.beck@de.ibm.com
-P: Ralph Wuerthner
-M: ralph.wuerthner@de.ibm.com
+M: Felix Beck <felix.beck@de.ibm.com>
+M: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
S: Supported
F: drivers/s390/crypto/
S390 ZFCP DRIVER
-P: Christof Schmitt
-M: christof.schmitt@de.ibm.com
-P: Martin Peschke
-M: mp3@de.ibm.com
+M: Christof Schmitt <christof.schmitt@de.ibm.com>
+M: Martin Peschke <mp3@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -4998,8 +4341,7 @@
F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER
-P: Ursula Braun
-M: ursula.braun@de.ibm.com
+M: Ursula Braun <ursula.braun@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@@ -5009,15 +4351,13 @@
F: net/iucv/
S3C24XX SD/MMC Driver
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Supported
F: drivers/mmc/host/s3cmci.*
SAA7146 VIDEO4LINUX-2 DRIVER
-P: Michael Hunold
-M: michael@mihu.de
+M: Michael Hunold <michael@mihu.de>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.mihu.de/linux/saa7146
@@ -5027,31 +4367,26 @@
F: include/media/*7146*
SC1200 WDT DRIVER
-P: Zwane Mwaikambo
-M: zwane@arm.linux.org.uk
+M: Zwane Mwaikambo <zwane@arm.linux.org.uk>
S: Maintained
F: drivers/watchdog/sc1200wdt.c
SCHEDULER
-P: Ingo Molnar
-M: mingo@elte.hu
-P: Peter Zijlstra
-M: peterz@infradead.org
+M: Ingo Molnar <mingo@elte.hu>
+M: Peter Zijlstra <peterz@infradead.org>
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
SCSI CDROM DRIVER
-P: Jens Axboe
-M: axboe@kernel.dk
+M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
F: drivers/scsi/sr*
SCSI SG DRIVER
-P: Doug Gilbert
-M: dgilbert@interlog.com
+M: Doug Gilbert <dgilbert@interlog.com>
L: linux-scsi@vger.kernel.org
W: http://www.torque.net/sg
S: Maintained
@@ -5059,8 +4394,7 @@
F: include/scsi/sg.h
SCSI SUBSYSTEM
-P: James E.J. Bottomley
-M: James.Bottomley@HansenPartnership.com
+M: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
L: linux-scsi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
@@ -5070,18 +4404,15 @@
F: include/scsi/
SCSI TAPE DRIVER
-P: Kai Mäkisara
-M: Kai.Makisara@kolumbus.fi
+M: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/st.txt
F: drivers/scsi/st*
SCTP PROTOCOL
-P: Vlad Yasevich
-M: vladislav.yasevich@hp.com
-P: Sridhar Samudrala
-M: sri@us.ibm.com
+M: Vlad Yasevich <vladislav.yasevich@hp.com>
+M: Sridhar Samudrala <sri@us.ibm.com>
L: linux-sctp@vger.kernel.org
W: http://lksctp.sourceforge.net
S: Supported
@@ -5091,8 +4422,7 @@
F: net/sctp/
SCx200 CPU SUPPORT
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Odd Fixes
F: Documentation/i2c/busses/scx200_acb
F: arch/x86/kernel/scx200_32.c
@@ -5102,49 +4432,42 @@
F: include/linux/scx200.h
SCx200 GPIO DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Maintained
F: drivers/char/scx200_gpio.c
F: include/linux/scx200_gpio.h
SCx200 HRT CLOCKSOURCE DRIVER
-P: Jim Cromie
-M: jim.cromie@gmail.com
+M: Jim Cromie <jim.cromie@gmail.com>
S: Maintained
F: drivers/clocksource/scx200_hrt.c
SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P: Sascha Sommer
-M: saschasommer@freenet.de
+M: Sascha Sommer <saschasommer@freenet.de>
L: sdricohcs-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-P: Pierre Ossman
-M: pierre@ossman.eu
+M: Pierre Ossman <pierre@ossman.eu>
L: sdhci-devel@lists.ossman.eu
S: Maintained
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-P: Anton Vorontsov
-M: avorontsov@ru.mvista.com
+M: Anton Vorontsov <avorontsov@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
L: sdhci-devel@lists.ossman.eu
S: Maintained
F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
-P: Ben Dooks
-M: ben-linux@fluff.org
+M: Ben Dooks <ben-linux@fluff.org>
L: sdhci-devel@lists.ossman.eu
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
SECURITY SUBSYSTEM
-P: James Morris
-M: jmorris@namei.org
+M: James Morris <jmorris@namei.org>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
@@ -5152,17 +4475,13 @@
F: security/
SECURITY CONTACT
-P: Security Officers
-M: security@kernel.org
+M: Security Officers <security@kernel.org>
S: Supported
SELINUX SECURITY MODULE
-P: Stephen Smalley
-M: sds@tycho.nsa.gov
-P: James Morris
-M: jmorris@namei.org
-P: Eric Paris
-M: eparis@parisplace.org
+M: Stephen Smalley <sds@tycho.nsa.gov>
+M: James Morris <jmorris@namei.org>
+M: Eric Paris <eparis@parisplace.org>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5171,15 +4490,13 @@
F: security/selinux/
SENSABLE PHANTOM
-P: Jiri Slaby
-M: jirislaby@gmail.com
+M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: drivers/misc/phantom.c
F: include/linux/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
-P: Jeff Garzik
-M: jgarzik@pobox.com
+M: Jeff Garzik <jgarzik@pobox.com>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
@@ -5188,10 +4505,8 @@
F: include/linux/libata.h
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-P: Sathya Perla
-M: sathyap@serverengines.com
-P: Subbu Seetharaman
-M: subbus@serverengines.com
+M: Sathya Perla <sathyap@serverengines.com>
+M: Subbu Seetharaman <subbus@serverengines.com>
L: netdev@vger.kernel.org
W: http://www.serverengines.com
S: Supported
@@ -5200,20 +4515,17 @@
SFC NETWORK DRIVER
P: Steve Hodgson
P: Ben Hutchings
-P: Robert Stonehouse
-M: linux-net-drivers@solarflare.com
+M: Robert Stonehouse <linux-net-drivers@solarflare.com>
S: Supported
F: drivers/net/sfc/
SGI GRU DRIVER
-P: Jack Steiner
-M: steiner@sgi.com
+M: Jack Steiner <steiner@sgi.com>
S: Maintained
F: drivers/misc/sgi-gru/
SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
-P: Pat Gefre
-M: pfg@sgi.com
+M: Pat Gefre <pfg@sgi.com>
L: linux-ia64@vger.kernel.org
S: Supported
F: Documentation/ia64/serial.txt
@@ -5221,22 +4533,19 @@
F: include/linux/ioc?.h
SGI VISUAL WORKSTATION 320 AND 540
-P: Andrey Panin
-M: pazke@donpac.ru
+M: Andrey Panin <pazke@donpac.ru>
L: linux-visws-devel@lists.sf.net
W: http://linux-visws.sf.net
S: Maintained for 2.6.
F: Documentation/sgi-visws.txt
SGI XP/XPC/XPNET DRIVER
-P: Robin Holt
-M: holt@sgi.com
+M: Robin Holt <holt@sgi.com>
S: Maintained
F: drivers/misc/sgi-xp/
SHARP LH SUPPORT (LH7952X & LH7A40X)
-P: Marc Singer
-M: elf@buici.com
+M: Marc Singer <elf@buici.com>
W: http://projects.buici.com/arm
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
@@ -5247,23 +4556,20 @@
F: drivers/usb/host/ohci-lh7a40*
SHPC HOTPLUG DRIVER
-P: Kristen Carlson Accardi
-M: kristen.c.accardi@intel.com
+M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: drivers/pci/hotplug/shpchp*
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
-P: Vincent Sanders
-M: support@simtec.co.uk
+M: Vincent Sanders <support@simtec.co.uk>
W: http://www.simtec.co.uk/products/EB110ATX/
S: Supported
SIMTEC EB2410ITX (BAST)
P: Ben Dooks
-P: Vincent Sanders
-M: support@simtec.co.uk
+M: Vincent Sanders <support@simtec.co.uk>
W: http://www.simtec.co.uk/products/EB2410ITX/
S: Supported
F: arch/arm/mach-s3c2410/
@@ -5271,31 +4577,27 @@
F: drivers/*/*/*s3c2410*
SIS 190 ETHERNET DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/sis190.c
SIS 900/7016 FAST ETHERNET DRIVER
-P: Daniele Venzano
-M: venza@brownhat.org
+M: Daniele Venzano <venza@brownhat.org>
W: http://www.brownhat.org/sis900.html
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/sis900.*
SIS 96X I2C/SMBUS DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-sis96x
F: drivers/i2c/busses/i2c-sis96x.c
SIS FRAMEBUFFER DRIVER
-P: Thomas Winischhofer
-M: thomas@winischhofer.net
+M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
S: Maintained
F: Documentation/fb/sisfb.txt
@@ -5303,70 +4605,59 @@
F: include/video/sisfb.h
SIS USB2VGA DRIVER
-P: Thomas Winischhofer
-M: thomas@winischhofer.net
+M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.at/linuxsisusbvga.shtml
S: Maintained
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-P: Stephen Hemminger
-M: shemminger@linux-foundation.org
+M: Stephen Hemminger <shemminger@linux-foundation.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/skge.*
F: drivers/net/sky2.*
SLAB ALLOCATOR
-P: Christoph Lameter
-M: cl@linux-foundation.org
-P: Pekka Enberg
-M: penberg@cs.helsinki.fi
-P: Matt Mackall
-M: mpm@selenic.com
+M: Christoph Lameter <cl@linux-foundation.org>
+M: Pekka Enberg <penberg@cs.helsinki.fi>
+M: Matt Mackall <mpm@selenic.com>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/sl?b*.h
F: mm/sl?b.c
SMC91x ETHERNET DRIVER
-P: Nicolas Pitre
-M: nico@cam.org
+M: Nicolas Pitre <nico@cam.org>
S: Maintained
F: drivers/net/smc91x.*
SMSC47B397 HARDWARE MONITOR DRIVER
-P: Mark M. Hoffman
-M: mhoffman@lightlink.com
+M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
F: drivers/hwmon/smsc47b397.c
SMSC911x ETHERNET DRIVER
-P: Steve Glendinning
-M: steve.glendinning@smsc.com
+M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: include/linux/smsc911x.h
F: drivers/net/smsc911x.*
SMSC9420 PCI ETHERNET DRIVER
-P: Steve Glendinning
-M: steve.glendinning@smsc.com
+M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/smsc9420.*
SMX UIO Interface
-P: Ben Nizette
-M: bn@niasdigital.com
+M: Ben Nizette <bn@niasdigital.com>
S: Maintained
F: drivers/uio/uio_smx.c
SN-IA64 (Itanium) SUB-PLATFORM
-P: Jes Sorensen
-M: jes@sgi.com
+M: Jes Sorensen <jes@sgi.com>
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
@@ -5374,8 +4665,7 @@
F: arch/ia64/sn/
SOC-CAMERA V4L2 SUBSYSTEM
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
+M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
@@ -5383,37 +4673,32 @@
F: drivers/media/video/v4l2*
SOEKRIS NET48XX LED SUPPORT
-P: Chris Boot
-M: bootc@bootc.net
+M: Chris Boot <bootc@bootc.net>
S: Maintained
F: drivers/leds/leds-net48xx.c
SOFTWARE RAID (Multiple Disks) SUPPORT
-P: Neil Brown
-M: neilb@suse.de
+M: Neil Brown <neilb@suse.de>
L: linux-raid@vger.kernel.org
S: Supported
F: drivers/md/
F: include/linux/raid/
SONIC NETWORK DRIVER
-P: Thomas Bogendoerfer
-M: tsbogend@alpha.franken.de
+M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/sonic.*
SONICS SILICON BACKPLANE DRIVER (SSB)
-P: Michael Buesch
-M: mb@bu3sch.de
+M: Michael Buesch <mb@bu3sch.de>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
SONY VAIO CONTROL DEVICE DRIVER
-P: Mattia Dongili
-M: malattia@linux.it
+M: Mattia Dongili <malattia@linux.it>
L: linux-acpi@vger.kernel.org
W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
@@ -5423,17 +4708,14 @@
F: include/linux/sony-laptop.h
SONY MEMORYSTICK CARD SUPPORT
-P: Alex Dubov
-M: oakad@yahoo.com
+M: Alex Dubov <oakad@yahoo.com>
W: http://tifmxx.berlios.de/
S: Maintained
F: drivers/memstick/host/tifm_ms.c
SOUND
-P: Jaroslav Kysela
-M: perex@perex.cz
-P: Takashi Iwai
-M: tiwai@suse.de
+M: Jaroslav Kysela <perex@perex.cz>
+M: Takashi Iwai <tiwai@suse.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
@@ -5444,10 +4726,8 @@
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-P: Liam Girdwood
-M: lrg@slimlogic.co.uk
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
+M: Liam Girdwood <lrg@slimlogic.co.uk>
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
@@ -5456,8 +4736,7 @@
F: include/sound/soc*
SPARC + UltraSPARC (sparc/sparc64)
-P: David S. Miller
-M: davem@davemloft.net
+M: "David S. Miller" <davem@davemloft.net>
L: sparclinux@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
@@ -5465,15 +4744,13 @@
F: arch/sparc/
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-P: Roger Wolff
-M: R.E.Wolff@BitWizard.nl
+M: Roger Wolff <R.E.Wolff@BitWizard.nl>
S: Supported
F: Documentation/serial/specialix.txt
F: drivers/char/specialix*
SPI SUBSYSTEM
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: spi-devel-general@lists.sourceforge.net
S: Maintained
F: Documentation/spi/
@@ -5481,18 +4758,15 @@
F: include/linux/spi/
SPIDERNET NETWORK DRIVER for CELL
-P: Ishizaki Kou
-M: kou.ishizaki@toshiba.co.jp
-P: Jens Osterkamp
-M: jens@de.ibm.com
+M: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M: Jens Osterkamp <jens@de.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/spider_net.txt
F: drivers/net/spider_net*
SPU FILE SYSTEM
-P: Jeremy Kerr
-M: jk@ozlabs.org
+M: Jeremy Kerr <jk@ozlabs.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
@@ -5501,8 +4775,7 @@
F: arch/powerpc/platforms/cell/spufs/
SQUASHFS FILE SYSTEM
-P: Phillip Lougher
-M: phillip@lougher.demon.co.uk
+M: Phillip Lougher <phillip@lougher.demon.co.uk>
L: squashfs-devel@lists.sourceforge.net (subscribers-only)
W: http://squashfs.org.uk
S: Maintained
@@ -5510,49 +4783,41 @@
F: fs/squashfs/
SRM (Alpha) environment access
-P: Jan-Benedict Glaw
-M: jbglaw@lug-owl.de
+M: Jan-Benedict Glaw <jbglaw@lug-owl.de>
S: Maintained
F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
-P: Greg Kroah-Hartman
-M: greg@kroah.com
-P: Chris Wright
-M: chrisw@sous-sol.org
+M: Greg Kroah-Hartman <greg@kroah.com>
+M: Chris Wright <chrisw@sous-sol.org>
L: stable@kernel.org
S: Maintained
STAGING SUBSYSTEM
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
L: devel@driverdev.osuosl.org
S: Maintained
F: drivers/staging/
STARFIRE/DURALAN NETWORK DRIVER
-P: Ion Badulescu
-M: ionut@cs.columbia.edu
-S: Maintained
+M: Ion Badulescu <ionut@badula.org>
+S: Odd Fixes
F: drivers/net/starfire*
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-W: http://mosquitonet.Stanford.EDU/strip.html
S: Orphan
F: drivers/net/wireless/strip.c
F: include/linux/if_strip.h
STRADIS MPEG-2 DECODER DRIVER
-P: Nathan Laredo
-M: laredo@gnu.org
+M: Nathan Laredo <laredo@gnu.org>
W: http://www.stradis.com/
S: Maintained
F: drivers/media/video/stradis.c
SUN3/3X
-P: Sam Creasey
-M: sammy@sammy.net
+M: Sam Creasey <sammy@sammy.net>
W: http://sammy.net/sun3/
S: Maintained
F: arch/m68k/kernel/*sun3*
@@ -5560,8 +4825,7 @@
F: arch/m68k/include/asm/sun3*
SUPERH
-P: Paul Mundt
-M: lethal@linux-sh.org
+M: Paul Mundt <lethal@linux-sh.org>
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
@@ -5571,12 +4835,9 @@
F: drivers/sh/
SUSPEND TO RAM
-P: Len Brown
-M: len.brown@intel.com
-P: Pavel Machek
-M: pavel@ucw.cz
-P: Rafael J. Wysocki
-M: rjw@sisk.pl
+M: Len Brown <len.brown@intel.com>
+M: Pavel Machek <pavel@ucw.cz>
+M: "Rafael J. Wysocki" <rjw@sisk.pl>
L: linux-pm@lists.linux-foundation.org
S: Supported
F: Documentation/power/
@@ -5588,32 +4849,28 @@
F: include/linux/pm.h
SVGA HANDLING
-P: Martin Mares
-M: mj@ucw.cz
+M: Martin Mares <mj@ucw.cz>
L: linux-video@atrey.karlin.mff.cuni.cz
S: Maintained
F: Documentation/svga.txt
F: arch/x86/boot/video*
SYSV FILESYSTEM
-P: Christoph Hellwig
-M: hch@infradead.org
+M: Christoph Hellwig <hch@infradead.org>
S: Maintained
F: Documentation/filesystems/sysv-fs.txt
F: fs/sysv/
F: include/linux/sysv_fs.h
TASKSTATS STATISTICS INTERFACE
-P: Balbir Singh
-M: balbir@linux.vnet.ibm.com
+M: Balbir Singh <balbir@linux.vnet.ibm.com>
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
F: kernel/taskstats.c
TC CLASSIFIER
-P: Jamal Hadi Salim
-M: hadi@cyberus.ca
+M: Jamal Hadi Salim <hadi@cyberus.ca>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/pkt_cls.h
@@ -5621,38 +4878,31 @@
F: net/sched/
TCP LOW PRIORITY MODULE
-P: Wong Hoi Sing, Edison
-M: hswong3i@gmail.com
-P: Hung Hing Lun, Mike
-M: hlhung3i@gmail.com
+M: "Wong Hoi Sing, Edison" <hswong3i@gmail.com>
+M: "Hung Hing Lun, Mike" <hlhung3i@gmail.com>
W: http://tcp-lp-mod.sourceforge.net/
S: Maintained
F: net/ipv4/tcp_lp.c
TEHUTI ETHERNET DRIVER
-P: Alexander Indenbaum
-M: baum@tehutinetworks.net
-P: Andy Gospodarek
-M: andy@greyhouse.net
+M: Alexander Indenbaum <baum@tehutinetworks.net>
+M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/tehuti*
Telecom Clock Driver for MCPL0010
-P: Mark Gross
-M: mark.gross@intel.com
+M: Mark Gross <mark.gross@intel.com>
S: Supported
F: drivers/char/tlclk.c
TENSILICA XTENSA PORT (xtensa)
-P: Chris Zankel
-M: chris@zankel.net
+M: Chris Zankel <chris@zankel.net>
S: Maintained
F: arch/xtensa/
THINKPAD ACPI EXTRAS DRIVER
-P: Henrique de Moraes Holschuh
-M: ibm-acpi@hmh.eng.br
+M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
@@ -5661,20 +4911,22 @@
F: drivers/platform/x86/thinkpad_acpi.c
TI FLASH MEDIA INTERFACE DRIVER
-P: Alex Dubov
-M: oakad@yahoo.com
+M: Alex Dubov <oakad@yahoo.com>
S: Maintained
F: drivers/misc/tifm*
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
+TI TWL4030 SERIES SOC CODEC DRIVER
+M: Peter Ujfalusi <peter.ujfalusi@nokia.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Maintained
+F: sound/soc/codecs/twl4030*
+
TIPC NETWORK LAYER
-P: Per Liden
-M: per.liden@ericsson.com
-P: Jon Maloy
-M: jon.maloy@ericsson.com
-P: Allan Stephens
-M: allan.stephens@windriver.com
+M: Per Liden <per.liden@ericsson.com>
+M: Jon Maloy <jon.maloy@ericsson.com>
+M: Allan Stephens <allan.stephens@windriver.com>
L: tipc-discussion@lists.sourceforge.net
W: http://tipc.sourceforge.net/
W: http://tipc.cslab.ericsson.net/
@@ -5685,8 +4937,7 @@
F: net/tipc/
TLAN NETWORK DRIVER
-P: Samuel Chessman
-M: chessman@tux.org
+M: Samuel Chessman <chessman@tux.org>
L: tlan-devel@lists.sourceforge.net (subscribers-only)
W: http://sourceforge.net/projects/tlan/
S: Maintained
@@ -5694,10 +4945,8 @@
F: drivers/net/tlan.*
TOMOYO SECURITY MODULE
-P: Kentaro Takeda
-M: takedakn@nttdata.co.jp
-P: Tetsuo Handa
-M: penguin-kernel@I-love.SAKURA.ne.jp
+M: Kentaro Takeda <takedakn@nttdata.co.jp>
+M: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
L: tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
L: tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
L: tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5711,8 +4960,7 @@
F: drivers/platform/x86/toshiba_acpi.c
TOSHIBA SMM DRIVER
-P: Jonathan Buzzard
-M: jonathan@buzzard.org.uk
+M: Jonathan Buzzard <jonathan@buzzard.org.uk>
L: tlinux-users@tce.toshiba-dme.co.jp
W: http://www.buzzard.org.uk/toshiba/
S: Maintained
@@ -5720,61 +4968,51 @@
F: include/linux/toshiba.h
TMIO MMC DRIVER
-P: Ian Molton
-M: ian@mnementh.co.uk
+M: Ian Molton <ian@mnementh.co.uk>
S: Maintained
F: drivers/mmc/host/tmio_mmc.*
TMPFS (SHMEM FILESYSTEM)
-P: Hugh Dickins
-M: hugh.dickins@tiscali.co.uk
+M: Hugh Dickins <hugh.dickins@tiscali.co.uk>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/shmem_fs.h
F: mm/shmem.c
TPM DEVICE DRIVER
-P: Debora Velarde
-M: debora@linux.vnet.ibm.com
-P: Rajiv Andrade
-M: srajiv@linux.vnet.ibm.com
+M: Debora Velarde <debora@linux.vnet.ibm.com>
+M: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
W: http://tpmdd.sourceforge.net
-P: Marcel Selhorst
-M: m.selhorst@sirrix.com
+M: Marcel Selhorst <m.selhorst@sirrix.com>
W: http://www.sirrix.com
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/char/tpm/
TRIVIAL PATCHES
-P: Jiri Kosina
-M: trivial@kernel.org
+M: Jiri Kosina <trivial@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
+
+TTY LAYER
+M: Greg Kroah-Hartman <gregkh@suse.de>
+S: Maintained
+T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
F: include/linux/serial.h
F: include/linux/tty.h
-TTY LAYER
-P: Alan Cox
-M: alan@lxorguk.ukuu.org.uk
-S: Maintained
-T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
-
TULIP NETWORK DRIVERS
-P: Grant Grundler
-M: grundler@parisc-linux.org
-P: Kyle McMartin
-M: kyle@mcmartin.ca
+M: Grant Grundler <grundler@parisc-linux.org>
+M: Kyle McMartin <kyle@mcmartin.ca>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
TUN/TAP driver
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
+M: Maxim Krasnyansky <maxk@qualcomm.com>
L: vtun@office.satix.net
W: http://vtun.sourceforge.net/tun
S: Maintained
@@ -5782,24 +5020,20 @@
F: arch/um/os-Linux/drivers/
TURBOCHANNEL SUBSYSTEM
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/tc/
F: include/linux/tc.h
U14-34F SCSI DRIVER
-P: Dario Ballabio
-M: ballabio_dario@emc.com
+M: Dario Ballabio <ballabio_dario@emc.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/u14-34f.c
UBI FILE SYSTEM (UBIFS)
-P: Artem Bityutskiy
-M: dedekind@infradead.org
-P: Adrian Hunter
-M: ext-adrian.hunter@nokia.com
+M: Artem Bityutskiy <dedekind@infradead.org>
+M: Adrian Hunter <adrian.hunter@nokia.com>
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubifs-2.6.git
W: http://www.linux-mtd.infradead.org/doc/ubifs.html
@@ -5808,37 +5042,32 @@
F: fs/ubifs/
UCLINUX (AND M68KNOMMU)
-P: Greg Ungerer
-M: gerg@uclinux.org
+M: Greg Ungerer <gerg@uclinux.org>
W: http://www.uclinux.org/
L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
F: arch/m68knommu/
UCLINUX FOR RENESAS H8/300 (H8300)
-P: Yoshinori Sato
-M: ysato@users.sourceforge.jp
+M: Yoshinori Sato <ysato@users.sourceforge.jp>
W: http://uclinux-h8.sourceforge.jp/
S: Supported
UDF FILESYSTEM
-P: Jan Kara
-M: jack@suse.cz
+M: Jan Kara <jack@suse.cz>
W: http://linux-udf.sourceforge.net
S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
UFS FILESYSTEM
-P: Evgeniy Dushistov
-M: dushistov@mail.ru
+M: Evgeniy Dushistov <dushistov@mail.ru>
S: Maintained
F: Documentation/filesystems/ufs.txt
F: fs/ufs/
ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-P: David Vrabel
-M: david.vrabel@csr.com
+M: David Vrabel <david.vrabel@csr.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/uwb/*
@@ -5846,8 +5075,7 @@
F: include/linux/uwb/
UNIFORM CDROM DRIVER
-P: Jens Axboe
-M: axboe@kernel.dk
+M: Jens Axboe <axboe@kernel.dk>
W: http://www.kernel.dk
S: Maintained
F: Documentation/cdrom/
@@ -5855,8 +5083,7 @@
F: include/linux/cdrom.h
UNSORTED BLOCK IMAGES (UBI)
-P: Artem Bityutskiy
-M: dedekind@infradead.org
+M: Artem Bityutskiy <dedekind@infradead.org>
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubi-2.6.git
@@ -5866,23 +5093,20 @@
F: include/mtd/ubi-user.h
USB ACM DRIVER
-P: Oliver Neukum
-M: oliver@neukum.name
+M: Oliver Neukum <oliver@neukum.name>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/usb/acm.txt
F: drivers/usb/class/cdc-acm.*
USB BLOCK DRIVER (UB ub)
-P: Pete Zaitcev
-M: zaitcev@redhat.com
+M: Pete Zaitcev <zaitcev@redhat.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/block/ub.c
USB CDC ETHERNET DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
+M: Greg Kroah-Hartman <greg@kroah.com>
L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
@@ -5890,39 +5114,34 @@
F: include/linux/usb/cdc.h
USB CYPRESS C67X00 DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/c67x00/
USB DAVICOM DM9601 DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
F: drivers/net/usb/dm9601.c
USB DIAMOND RIO500 DRIVER
-P: Cesar Miquel
-M: miquel@df.uba.ar
+M: Cesar Miquel <miquel@df.uba.ar>
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
USB ET61X[12]51 DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -5931,8 +5150,7 @@
F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
@@ -5940,8 +5158,7 @@
F: include/linux/usb/gadget*
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-P: Jiri Kosina
-M: jkosina@suse.cz
+M: Jiri Kosina <jkosina@suse.cz>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
@@ -5949,23 +5166,20 @@
F: drivers/hid/usbhid/
USB ISP116X DRIVER
-P: Olav Kongas
-M: ok@artecdesign.ee
+M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/host/isp116x*
F: include/linux/usb/isp116x.h
USB KAWASAKI LSI DRIVER
-P: Oliver Neukum
-M: oliver@neukum.name
+M: Oliver Neukum <oliver@neukum.name>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/kl5kusb105.*
USB MASS STORAGE DRIVER
-P: Matthew Dharm
-M: mdharm-usb@one-eyed-alien.net
+M: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
@@ -5973,31 +5187,27 @@
F: drivers/usb/storage/
USB OHCI DRIVER
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
USB OPTION-CARD DRIVER
-P: Matthias Urlichs
-M: smurf@smurf.noris.de
+M: Matthias Urlichs <smurf@smurf.noris.de>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/option.c
USB OV511 DRIVER
-P: Mark McClelland
-M: mmcclell@bigfoot.com
+M: Mark McClelland <mmcclell@bigfoot.com>
L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
F: drivers/media/video/ov511.*
USB PEGASUS DRIVER
-P: Petko Manolov
-M: petkan@users.sourceforge.net
+M: Petko Manolov <petkan@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
@@ -6005,15 +5215,13 @@
F: drivers/net/usb/pegasus.*
USB PRINTER DRIVER (usblp)
-P: Pete Zaitcev
-M: zaitcev@redhat.com
+M: Pete Zaitcev <zaitcev@redhat.com>
L: linux-usb@vger.kernel.org
S: Supported
F: drivers/usb/class/usblp.c
USB RTL8150 DRIVER
-P: Petko Manolov
-M: petkan@users.sourceforge.net
+M: Petko Manolov <petkan@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
@@ -6021,8 +5229,7 @@
F: drivers/net/usb/rtl8150.c
USB SE401 DRIVER
-P: Jeroen Vreeken
-M: pe1rxq@amsat.org
+M: Jeroen Vreeken <pe1rxq@amsat.org>
L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
@@ -6030,15 +5237,13 @@
F: drivers/media/video/se401.*
USB SERIAL BELKIN F5U103 DRIVER
-P: William Greathouse
-M: wgreathouse@smva.com
+M: William Greathouse <wgreathouse@smva.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/belkin_sa.*
USB SERIAL CYPRESS M8 DRIVER
-P: Lonnie Mendez
-M: dignome@gmail.com
+M: Lonnie Mendez <dignome@gmail.com>
L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
@@ -6046,23 +5251,20 @@
F: drivers/usb/serial/cypress_m8.*
USB SERIAL CYBERJACK DRIVER
-P: Matthias Bruestle and Harald Welte
-M: support@reiner-sct.com
+M: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
W: http://www.reiner-sct.de/support/treiber_cyberjack.php
S: Maintained
F: drivers/usb/serial/cyberjack.c
USB SERIAL DIGI ACCELEPORT DRIVER
-P: Peter Berger and Al Borchers
-M: pberger@brimson.com
-M: alborchers@steinerpoint.com
+M: Peter Berger <pberger@brimson.com>
+M: Al Borchers <alborchers@steinerpoint.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/usb-serial.txt
@@ -6071,38 +5273,33 @@
F: include/linux/usb/serial.h
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-P: Gary Brubaker
-M: xavyer@ix.netcom.com
+M: Gary Brubaker <xavyer@ix.netcom.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
+M: Greg Kroah-Hartman <greg@kroah.com>
L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
F: drivers/usb/serial/*keyspan*
USB SERIAL WHITEHEAT DRIVER
-P: Support Department
-M: support@connecttech.com
+M: Support Department <support@connecttech.com>
L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
F: drivers/usb/serial/whiteheat*
USB SMSC95XX ETHERNET DRIVER
-P: Steve Glendinning
-M: steve.glendinning@smsc.com
+M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/usb/smsc95xx.*
USB SN9C1xx DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6112,8 +5309,7 @@
F: drivers/media/video/sn9c102/
USB SUBSYSTEM
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
@@ -6125,15 +5321,13 @@
F: include/linux/usb/
USB UHCI DRIVER
-P: Alan Stern
-M: stern@rowland.harvard.edu
+M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
-P: David Brownell
-M: dbrownell@users.sourceforge.net
+M: David Brownell <dbrownell@users.sourceforge.net>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
@@ -6141,8 +5335,7 @@
F: include/linux/usb/usbnet.h
USB VIDEO CLASS
-P: Laurent Pinchart
-M: laurent.pinchart@skynet.be
+M: Laurent Pinchart <laurent.pinchart@skynet.be>
L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6151,8 +5344,7 @@
F: drivers/media/video/uvc/
USB W996[87]CF DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6162,21 +5354,18 @@
F: drivers/media/video/w996*
USB WIRELESS RNDIS DRIVER (rndis_wlan)
-P: Jussi Kivilinna
-M: jussi.kivilinna@mbnet.fi
+M: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/rndis_wlan.c
USB XHCI DRIVER
-P: Sarah Sharp
-M: sarah.a.sharp@intel.com
+M: Sarah Sharp <sarah.a.sharp@intel.com>
L: linux-usb@vger.kernel.org
S: Supported
USB ZC0301 DRIVER
-P: Luca Risolia
-M: luca.risolia@studio.unibo.it
+M: Luca Risolia <luca.risolia@studio.unibo.it>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6186,16 +5375,14 @@
F: drivers/media/video/zc0301/
USB ZD1201 DRIVER
-P: Jeroen Vreeken
-M: pe1rxq@amsat.org
+M: Jeroen Vreeken <pe1rxq@amsat.org>
L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
F: drivers/net/wireless/zd1201.*
USB ZR364XX DRIVER
-P: Antoine Jacquet
-M: royale@zerezo.com
+M: Antoine Jacquet <royale@zerezo.com>
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6205,8 +5392,7 @@
F: drivers/media/video/zr364xx.c
USER-MODE LINUX (UML)
-P: Jeff Dike
-M: jdike@addtoit.com
+M: Jeff Dike <jdike@addtoit.com>
L: user-mode-linux-devel@lists.sourceforge.net
L: user-mode-linux-user@lists.sourceforge.net
W: http://user-mode-linux.sourceforge.net
@@ -6217,26 +5403,22 @@
F: fs/hppfs/
USERSPACE I/O (UIO)
-P: Hans J. Koch
-M: hjk@linutronix.de
-P: Greg Kroah-Hartman
-M: gregkh@suse.de
+M: "Hans J. Koch" <hjk@linutronix.de>
+M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
F: include/linux/uio*.h
UTIL-LINUX-NG PACKAGE
-P: Karel Zak
-M: kzak@redhat.com
+M: Karel Zak <kzak@redhat.com>
L: util-linux-ng@vger.kernel.org
W: http://kernel.org/~kzak/util-linux-ng/
T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
S: Maintained
UVESAFB DRIVER
-P: Michal Januszewski
-M: spock@gentoo.org
+M: Michal Januszewski <spock@gentoo.org>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://dev.gentoo.org/~spock/projects/uvesafb/
S: Maintained
@@ -6244,53 +5426,44 @@
F: drivers/video/uvesafb.*
VFAT/FAT/MSDOS FILESYSTEM
-P: OGAWA Hirofumi
-M: hirofumi@mail.parknet.co.jp
+M: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
VIA RHINE NETWORK DRIVER
-P: Roger Luethi
-M: rl@hellgate.ch
+M: Roger Luethi <rl@hellgate.ch>
S: Maintained
F: drivers/net/via-rhine.c
VIAPRO SMBUS DRIVER
-P: Jean Delvare
-M: khali@linux-fr.org
+M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-viapro
F: drivers/i2c/busses/i2c-viapro.c
VIA SD/MMC CARD CONTROLLER DRIVER
-P: Joseph Chan
-M: JosephChan@via.com.tw
-P: Harald Welte
-M: HaraldWelte@viatech.com
+M: Joseph Chan <JosephChan@via.com.tw>
+M: Harald Welte <HaraldWelte@viatech.com>
S: Maintained
F: drivers/mmc/host/via-sdmmc.c
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-P: Joseph Chan
-M: JosephChan@via.com.tw
-P: Scott Fang
-M: ScottFang@viatech.com.cn
+M: Joseph Chan <JosephChan@via.com.tw>
+M: Scott Fang <ScottFang@viatech.com.cn>
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/video/via/
VIA VELOCITY NETWORK DRIVER
-P: Francois Romieu
-M: romieu@fr.zoreil.com
+M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/via-velocity.*
VLAN (802.1Q)
-P: Patrick McHardy
-M: kaber@trash.net
+M: Patrick McHardy <kaber@trash.net>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/macvlan.c
@@ -6298,18 +5471,15 @@
F: net/8021q/
VLYNQ BUS
-P: Florian Fainelli
-M: florian@openwrt.org
+M: Florian Fainelli <florian@openwrt.org>
L: openwrt-devel@lists.openwrt.org
S: Maintained
F: drivers/vlynq/vlynq.c
F: include/linux/vlynq.h
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-P: Liam Girdwood
-M: lrg@slimlogic.co.uk
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
+M: Liam Girdwood <lrg@slimlogic.co.uk>
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
W: http://opensource.wolfsonmicro.com/node/15
W: http://www.slimlogic.co.uk/?p=48
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
@@ -6318,52 +5488,45 @@
F: include/linux/regulator/
VT1211 HARDWARE MONITOR DRIVER
-P: Juerg Haefliger
-M: juergh@gmail.com
+M: Juerg Haefliger <juergh@gmail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/vt1211
F: drivers/hwmon/vt1211.c
VT8231 HARDWARE MONITOR DRIVER
-P: Roger Lucas
-M: vt8231@hiddenengine.co.uk
+M: Roger Lucas <vt8231@hiddenengine.co.uk>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/vt8231.c
W1 DALLAS'S 1-WIRE BUS
-P: Evgeniy Polyakov
-M: johnpol@2ka.mipt.ru
+M: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
S: Maintained
F: Documentation/w1/
F: drivers/w1/
W83791D HARDWARE MONITORING DRIVER
-P: Marc Hulsman
-M: m.hulsman@tudelft.nl
+M: Marc Hulsman <m.hulsman@tudelft.nl>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/w83791d
F: drivers/hwmon/w83791d.c
W83793 HARDWARE MONITORING DRIVER
-P: Rudolf Marek
-M: r.marek@assembler.cz
+M: Rudolf Marek <r.marek@assembler.cz>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/w83793
F: drivers/hwmon/w83793.c
W83L51xD SD/MMC CARD INTERFACE DRIVER
-P: Pierre Ossman
-M: pierre@ossman.eu
+M: Pierre Ossman <pierre@ossman.eu>
S: Maintained
F: drivers/mmc/host/wbsd.*
WATCHDOG DEVICE DRIVERS
-P: Wim Van Sebroeck
-M: wim@iguana.be
+M: Wim Van Sebroeck <wim@iguana.be>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
S: Maintained
F: Documentation/watchdog/
@@ -6371,8 +5534,7 @@
F: include/linux/watchdog.h
WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-P: Jean Tourrilhes
-M: jt@hpl.hp.com
+M: Jean Tourrilhes <jt@hpl.hp.com>
L: linux-wireless@vger.kernel.org
W: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
S: Maintained
@@ -6380,46 +5542,39 @@
F: drivers/net/wireless/wavelan*
WD7000 SCSI DRIVER
-P: Miroslav Zagorac
-M: zaga@fly.cc.fer.hr
+M: Miroslav Zagorac <zaga@fly.cc.fer.hr>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/wd7000.c
WIMAX STACK
-P: Inaky Perez-Gonzalez
-M: inaky.perez-gonzalez@intel.com
+M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org
S: Supported
W: http://linuxwimax.org
WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-P: David Vrabel
-M: david.vrabel@csr.com
+M: David Vrabel <david.vrabel@csr.com>
S: Maintained
F: include/linux/wlp.h
F: drivers/uwb/wlp/
WISTRON LAPTOP BUTTON DRIVER
-P: Miloslav Trmac
-M: mitr@volny.cz
+M: Miloslav Trmac <mitr@volny.cz>
S: Maintained
F: drivers/input/misc/wistron_btns.c
WL3501 WIRELESS PCMCIA CARD DRIVER
-P: Arnaldo Carvalho de Melo
-M: acme@ghostprotocols.net
+M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: linux-wireless@vger.kernel.org
W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
-P: Liam Girdwood
-M: lrg@slimlogic.co.uk
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
+M: Liam Girdwood <lrg@slimlogic.co.uk>
L: linux-input@vger.kernel.org
T: git git://opensource.wolfsonmicro.com/linux-2.6-touch
W: http://opensource.wolfsonmicro.com/node/7
@@ -6428,8 +5583,7 @@
F: include/linux/wm97xx.h
X.25 NETWORK LAYER
-P: Henner Eisen
-M: eis@baty.hanse.de
+M: Henner Eisen <eis@baty.hanse.de>
L: linux-x25@vger.kernel.org
S: Maintained
F: Documentation/networking/x25*
@@ -6437,12 +5591,9 @@
F: net/x25/
X86 ARCHITECTURE (32-BIT AND 64-BIT)
-P: Thomas Gleixner
-M: tglx@linutronix.de
-P: Ingo Molnar
-M: mingo@redhat.com
-P: H. Peter Anvin
-M: hpa@zytor.com
+M: Thomas Gleixner <tglx@linutronix.de>
+M: Ingo Molnar <mingo@redhat.com>
+M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
@@ -6450,10 +5601,8 @@
F: arch/x86/
XEN HYPERVISOR INTERFACE
-P: Jeremy Fitzhardinge
-M: jeremy@xensource.com
-P: Chris Wright
-M: chrisw@sous-sol.org
+M: Jeremy Fitzhardinge <jeremy@xensource.com>
+M: Chris Wright <chrisw@sous-sol.org>
L: virtualization@lists.osdl.org
L: xen-devel@lists.xensource.com
S: Supported
@@ -6465,8 +5614,7 @@
XFS FILESYSTEM
P: Silicon Graphics Inc
-P: Felix Blyakher
-M: felixb@sgi.com
+M: Felix Blyakher <felixb@sgi.com>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
@@ -6476,38 +5624,33 @@
F: fs/xfs/
XILINX SYSTEMACE DRIVER
-P: Grant Likely
-M: grant.likely@secretlab.ca
+M: Grant Likely <grant.likely@secretlab.ca>
W: http://www.secretlab.ca/
S: Maintained
F: drivers/block/xsysace.c
XILINX UARTLITE SERIAL DRIVER
-P: Peter Korsgaard
-M: jacmet@sunsite.dk
+M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/serial/uartlite.c
YAM DRIVER FOR AX.25
-P: Jean-Paul Roubelat
-M: jpr@f6fbb.org
+M: Jean-Paul Roubelat <jpr@f6fbb.org>
L: linux-hams@vger.kernel.org
S: Maintained
F: drivers/net/hamradio/yam*
F: include/linux/yam.h
YEALINK PHONE DRIVER
-P: Henk Vergonet
-M: Henk.Vergonet@gmail.com
+M: Henk Vergonet <Henk.Vergonet@gmail.com>
L: usbb2k-api-dev@nongnu.org
S: Maintained
F: Documentation/input/yealink.txt
F: drivers/input/misc/yealink.*
Z8530 DRIVER FOR AX.25
-P: Joerg Reuter
-M: jreuter@yaina.de
+M: Joerg Reuter <jreuter@yaina.de>
W: http://yaina.de/jreuter/
W: http://www.qsl.net/dl1bke/
L: linux-hams@vger.kernel.org
@@ -6517,10 +5660,8 @@
F: drivers/net/hamradio/z8530.h
ZD1211RW WIRELESS DRIVER
-P: Daniel Drake
-M: dsd@gentoo.org
-P: Ulrich Kunitz
-M: kune@deine-taler.de
+M: Daniel Drake <dsd@gentoo.org>
+M: Ulrich Kunitz <kune@deine-taler.de>
W: http://zd1211.ath.cx/wiki/DriverRewrite
L: linux-wireless@vger.kernel.org
L: zd1211-devs@lists.sourceforge.net (subscribers-only)
@@ -6536,14 +5677,12 @@
F: drivers/media/video/zoran/
ZS DECSTATION Z85C30 SERIAL DRIVER
-P: Maciej W. Rozycki
-M: macro@linux-mips.org
+M: "Maciej W. Rozycki" <macro@linux-mips.org>
S: Maintained
F: drivers/serial/zs.*
THE REST
-P: Linus Torvalds
-M: torvalds@linux-foundation.org
+M: Linus Torvalds <torvalds@linux-foundation.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S: Buried alive in reporters
diff --git a/Makefile b/Makefile
index d1216fe..abcfa85 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
@@ -140,15 +140,13 @@
endif
srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR := $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
objtree := $(CURDIR)
src := $(srctree)
obj := $(objtree)
VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
# SUBARCH tells the usermode build what the underlying arch is. That is set
@@ -344,7 +342,9 @@
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
- -Werror-implicit-function-declaration
+ -Werror-implicit-function-declaration \
+ -Wno-format-security \
+ -fno-delete-null-pointer-checks
KBUILD_AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -566,7 +566,7 @@
KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
# disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS += $(call cc-option,-fwrapv)
+KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
# revert to pre-gcc-4.4 behaviour of .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a..b663f1f 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@
#ifndef MODULE
#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#else
/*
* To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@
: "=&r"(__ptr), "=&r"(tmp_gp)); \
(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-#define PER_CPU_ATTRIBUTES __used
+#define PER_CPU_DEF_ATTRIBUTES __used
#endif /* MODULE */
@@ -71,7 +71,7 @@
#define __get_cpu_var(var) per_cpu_var(var)
#define __raw_get_cpu_var(var) per_cpu_var(var)
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
#endif /* SMP */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index d069526..60c83ab 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -37,6 +37,7 @@
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.addr_limit = KERNEL_DS, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h
index c136365..4286675 100644
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -9,7 +9,7 @@
#include <asm-generic/tlb.h>
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd)
#endif
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 1e9ad52..e072041d 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -8,7 +8,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd94..a89e473 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@
output to the second serial port on these devices. Saying N will
cause the debug messages to appear on the first serial port.
-config DEBUG_S3C_PORT
- depends on DEBUG_LL && PLAT_S3C
- bool "Kernel low-level debugging messages via S3C UART"
- help
- Say Y here if you want debug print routines to go to one of the
- S3C internal UARTs. The chosen UART must have been configured
- before it is used.
-
config DEBUG_S3C_UART
depends on PLAT_S3C
int "S3C UART to use for low-level debug"
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9e6e512..17153b5 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -29,7 +29,6 @@
static void putstr(const char *ptr);
-#include <linux/compiler.h>
#include <mach/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index f37afd9..aae5bc0 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/mutex.h>
+#include <linux/clk.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66..605a846 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun 3 13:52:33 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
-# Loadable module support
+# IO Schedulers
#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
# CONFIG_ARCH_AT91RM9200DK is not set
# CONFIG_MACH_AT91RM9200EK is not set
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
@@ -112,23 +249,48 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
@@ -137,8 +299,16 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -149,19 +319,93 @@
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -170,53 +414,156 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
-# Memory Technology Devices (MTD)
+# User Modules And Translation Layers
#
-# CONFIG_MTD is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
-# Parallel port support
+# RAM/ROM/Flash chip drivers
#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
#
-# IO Schedulers
+# EEPROM support
#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -232,145 +579,87 @@
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
-# Ethernet (10000 Mbit)
+# USB Network Adapters
#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -380,7 +669,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -390,23 +678,25 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -419,159 +709,232 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_AT91_SPI is not set
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# Misc devices
+# Memory mapped GPIO expanders:
#
#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -579,55 +942,129 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# OTG and related infrastructure
#
-# CONFIG_MMC is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
-# XFS support
+# Caches
#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 083516c..75263a8 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,15 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr 8 10:18:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Fri Jul 24 16:08:06 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -85,7 +84,12 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -99,6 +103,12 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -111,7 +121,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -138,13 +148,14 @@
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -153,25 +164,25 @@
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
@@ -188,6 +199,8 @@
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_MX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
@@ -213,7 +226,6 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_COMMON_CLKDEV=y
#
@@ -238,7 +250,6 @@
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -253,10 +264,11 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -361,6 +373,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -474,7 +487,16 @@
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
@@ -485,7 +507,15 @@
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -494,7 +524,21 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -508,7 +552,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -534,6 +577,8 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
@@ -580,6 +625,11 @@
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@@ -592,6 +642,7 @@
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -644,6 +695,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
@@ -668,7 +720,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -719,6 +770,7 @@
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
@@ -753,54 +805,16 @@
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -917,6 +931,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -962,12 +977,15 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -1021,6 +1039,12 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1119,25 +1143,11 @@
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
@@ -1151,16 +1161,104 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1168,6 +1266,8 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 20ada52..a4f9a2a 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,15 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr 8 11:06:37 2009
+# Linux kernel version: 2.6.31-rc4
+# Tue Jul 28 14:11:34 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -86,7 +85,12 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -97,6 +101,11 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -136,13 +145,14 @@
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -151,25 +161,25 @@
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
@@ -178,6 +188,7 @@
# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
CONFIG_ARCH_MX31=y
+CONFIG_ARCH_MX35=y
#
# MX3 platforms:
@@ -185,12 +196,19 @@
CONFIG_MACH_MX31ADS=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_MX35_3DS=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
+CONFIG_ARCH_HAS_RNGA=y
+CONFIG_ARCH_MXC_IOMUX_V3=y
#
# Processor Type
@@ -218,6 +236,7 @@
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
+# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
#
@@ -242,7 +261,6 @@
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -257,10 +275,11 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -362,6 +381,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -465,7 +485,16 @@
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
@@ -476,10 +505,30 @@
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -493,7 +542,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -528,7 +576,7 @@
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
+CONFIG_DNET=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,8 +585,10 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -609,6 +659,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
@@ -633,7 +684,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -669,6 +719,7 @@
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
@@ -703,6 +754,8 @@
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
@@ -711,10 +764,8 @@
CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
+# CONFIG_AB3100_CORE is not set
+CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
@@ -758,8 +809,10 @@
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
@@ -847,8 +900,11 @@
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -861,10 +917,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -921,6 +979,12 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -937,6 +1001,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -979,22 +1044,7 @@
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARM_UNWIND=y
@@ -1094,9 +1144,9 @@
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
@@ -1109,9 +1159,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1119,6 +1170,8 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 28be17f..d5ff477 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1107,7 +1107,7 @@
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8f..b498104 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@
CONFIG_SMDK2440_CPU2440=y
CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
#
# S3C2442 Machines
@@ -2298,7 +2299,6 @@
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50..3286060 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98..9d32fae 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
CONFIG_DEBUG_S3C_UART=0
#
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e1..7d61ae6 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun 1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +17,12 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -68,7 +66,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -81,8 +78,13 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -94,6 +96,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -106,7 +112,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -138,9 +144,9 @@
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -216,8 +222,8 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
#
@@ -243,7 +249,6 @@
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -258,17 +263,18 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -359,6 +365,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -497,6 +504,7 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -533,12 +541,14 @@
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -597,9 +607,11 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
#
# External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
#
# SPI Protocol Masters
@@ -647,6 +659,7 @@
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -678,22 +692,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -760,6 +761,11 @@
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
@@ -797,7 +803,7 @@
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -887,7 +894,10 @@
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -900,16 +910,19 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
#
# Caches
@@ -1033,6 +1046,7 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1077,16 @@
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9e07fe5..9ed2377 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -159,8 +159,6 @@
#else /* ARM_ARCH_6 */
-#include <asm/system.h>
-
#ifdef CONFIG_SMP
#error SMP not supported on pre-ARMv6 CPUs
#endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1..9c746af 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d64..c433c6c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -285,15 +285,6 @@
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_special(pte) (0)
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS 30
-
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -384,16 +375,50 @@
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry. Swap entries are stored in the Linux
+ * page tables as follows:
*
- * We support up to 32GB of swap on 4k machines
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file. Note that
+ * the offset field is always non-zero.
*/
-#define __swp_type(x) (((x).val >> 2) & 0x7f)
-#define __swp_offset(x) ((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT 2
+#define __SWP_TYPE_BITS 7
+#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry. File entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 2)
+#define pgoff_to_pte(x) __pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS 30
+
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
/* FIXME: this is not correct */
#define kern_addr_valid(addr) (1)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 4f88482..73394e5 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -73,7 +73,7 @@
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.flags = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.cpu_domain = domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 321c83e..f41a6f5 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -102,8 +102,8 @@
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
#define tlb_migrate_finish(mm) do { } while (0)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e509..8c3de1a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -148,7 +148,7 @@
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
- mov lr, r1 @ restore lr
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600..b7c3490 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@
return 0;
}
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
- .handle_irq = handle_bad_irq,
- .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
@@ -124,10 +113,13 @@
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
- if (irq >= NR_IRQS)
- handle_bad_irq(irq, &bad_irq_desc);
- else
+ if (unlikely(irq >= NR_IRQS)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Bad IRQ%u\n", irq);
+ ack_bad_irq(irq);
+ } else {
generic_handle_irq(irq);
+ }
/* AT91 specific workaround */
irq_finish(irq);
@@ -165,10 +157,6 @@
for (irq = 0; irq < NR_IRQS; irq++)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
-#ifdef CONFIG_SMP
- cpumask_setall(bad_irq_desc.affinity);
- bad_irq_desc.node = smp_processor_id();
-#endif
init_arch_irq();
}
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb424..f6bc5d4 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -133,7 +133,7 @@
}
#ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe *frame)
+static int preserve_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
@@ -146,7 +146,7 @@
return __copy_to_user(frame, kframe, sizeof(*frame));
}
-static int restore_crunch_context(struct crunch_sigframe *frame)
+static int restore_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3..6937102 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/page.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
@@ -63,7 +64,7 @@
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
}
@@ -118,7 +119,7 @@
*(.got) /* Global offset table */
}
- RODATA
+ RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
@@ -158,17 +159,17 @@
*(.data.init_task)
#ifdef CONFIG_XIP_KERNEL
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_DATA
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_begin = .;
*(.data.nosave)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270be..a55398e 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <linux/clk.h>
#include <mach/hardware.h>
@@ -218,6 +220,56 @@
}
};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA30,
+ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA31,
+ .code = BTN_4,
+ .desc = "Button 4",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
+ at91_set_deglitch(AT91_PIN_PA30, 1);
+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
+ at91_set_deglitch(AT91_PIN_PA31, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* Push Buttons */
+ ek_add_device_buttons();
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a4..f6b5672 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@
static void at91_lcdc_power_control(int on)
{
if (on)
- at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
else
- at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+ at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
}
/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
.default_monspecs = &at91fb_default_monspecs,
.atmel_lcdfb_power_control = at91_lcdc_power_control,
.guard_time = 1,
+ .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
};
#else
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
new file mode 100644
index 0000000..187cb58
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+ unsigned int nr_channels;
+ dma_cap_mask_t cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+ AT_DMA_SLAVE_WIDTH_8BIT = 0,
+ AT_DMA_SLAVE_WIDTH_16BIT,
+ AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ * memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ * peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+ struct device *dma_dev;
+ dma_addr_t tx_reg;
+ dma_addr_t rx_reg;
+ enum at_dma_slave_width reg_width;
+ u32 cfg;
+ u32 ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
+#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
+#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
+#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
+#define ATC_SRC_H2SEL_SW (0x0 << 9)
+#define ATC_SRC_H2SEL_HW (0x1 << 9)
+#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
+#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
+#define ATC_DST_H2SEL_SW (0x0 << 13)
+#define ATC_DST_H2SEL_HW (0x1 << 13)
+#define ATC_SOD (0x1 << 16) /* Stop On Done */
+#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
+#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
+#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
+#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
+#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
+#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
+#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
+#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
+#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
+#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
+#define ATC_SCSIZE_1 (0x0 << 16)
+#define ATC_SCSIZE_4 (0x1 << 16)
+#define ATC_SCSIZE_8 (0x2 << 16)
+#define ATC_SCSIZE_16 (0x3 << 16)
+#define ATC_SCSIZE_32 (0x4 << 16)
+#define ATC_SCSIZE_64 (0x5 << 16)
+#define ATC_SCSIZE_128 (0x6 << 16)
+#define ATC_SCSIZE_256 (0x7 << 16)
+#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
+#define ATC_DCSIZE_1 (0x0 << 20)
+#define ATC_DCSIZE_4 (0x1 << 20)
+#define ATC_DCSIZE_8 (0x2 << 20)
+#define ATC_DCSIZE_16 (0x3 << 20)
+#define ATC_DCSIZE_32 (0x4 << 20)
+#define ATC_DCSIZE_64 (0x5 << 20)
+#define ATC_DCSIZE_128 (0x6 << 20)
+#define ATC_DCSIZE_256 (0x7 << 20)
+
+#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5ac2f56..d6ab64c 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -37,7 +37,6 @@
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
-#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 28c9008..84ad5d1 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -36,7 +36,6 @@
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
-#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d9d4045..56c8cd0 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -45,7 +45,6 @@
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/emac.h>
-#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e17de63..8657e72 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -47,7 +47,6 @@
#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/emac.h>
-#include <mach/common.h>
#define DM646X_EVM_PHY_MASK (0x2)
#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 748a8e4..7acdfd8a 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -52,7 +52,6 @@
#include <mach/serial.h>
#include <mach/psc.h>
#include <mach/mux.h>
-#include <mach/common.h>
#define SFFSDR_PHY_MASK (0x2)
#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index a2df5bb..dbcac9c 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -33,6 +33,7 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/io.h>
#include <mach/dma.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec0..4117344 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -41,9 +41,6 @@
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
-#define TS72XX_NOR_PHYS_BASE 0x60000000
-#define TS72XX_NOR2_PHYS_BASE 0x62000000
-
#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d..aaf1371 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -112,13 +112,16 @@
}
}
+/*************************************************************************
+ * NOR flash (TS-7200 only)
+ *************************************************************************/
static struct physmap_flash_data ts72xx_flash_data = {
- .width = 1,
+ .width = 2,
};
static struct resource ts72xx_flash_resource = {
- .start = TS72XX_NOR_PHYS_BASE,
- .end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
+ .start = EP93XX_CS6_PHYS_BASE,
+ .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
@@ -132,6 +135,12 @@
.resource = &ts72xx_flash_resource,
};
+static void __init ts72xx_register_flash(void)
+{
+ if (board_is_ts7200())
+ platform_device_register(&ts72xx_flash);
+}
+
static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
{
__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -165,8 +174,7 @@
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
- if (board_is_ts7200())
- platform_device_register(&ts72xx_flash);
+ ts72xx_register_flash();
platform_device_register(&ts72xx_rtc_device);
ep93xx_register_eth(&ts72xx_eth_data, 1);
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e021a80..bc74278 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -289,7 +289,7 @@
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 )
#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 )
-#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 )
#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 )
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index 1d640d0..e0f911d 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -17,6 +17,11 @@
#include <asm/sizes.h>
/*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE 25000000
+
+/*
* Physical RAM address.
*/
#define KS8695_SDRAM_PA 0x00000000
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
index 4682e35..10f7163 100644
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -14,7 +14,8 @@
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
#endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index f5ebcc0..7849966 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -245,6 +245,9 @@
static void __init ks8695_pci_preinit(void)
{
+ /* make software reset to avoid freeze if PCI bus was messed up */
+ __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
+
/* stage 1 initialization, subid, subdevice = 0x0001 */
__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 17a21a2..851f245 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -36,6 +36,14 @@
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
+config MACH_PCM037_EET
+ bool "Support pcm037 EET board extensions"
+ depends on MACH_PCM037
+ help
+ Add support for PCM037 EET baseboard extensions. If you are using the
+ OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+ command-line parameter.
+
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 0322696..6b97754 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 54118109..ee331fd 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -31,6 +31,8 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -46,8 +48,10 @@
#include <mach/mmc.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
#include "devices.h"
+#include "crm_regs.h"
static int armadillo5x0_pins[] = {
/* UART1 */
@@ -93,7 +97,56 @@
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+ {
+ .name = "nor.bootloader",
+ .offset = 0x00000000,
+ .size = 4*32*1024,
+ }, {
+ .name = "nor.kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16*128*1024,
+ }, {
+ .name = "nor.userland",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 110*128*1024,
+ }, {
+ .name = "nor.config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1*128*1024,
+ },
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+ .width = 2,
+ .parts = armadillo5x0_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &armadillo5x0_nor_flash_resource,
};
/*
@@ -272,6 +325,16 @@
/* Register FB */
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+ /* Register NOR Flash */
+ mxc_register_device(&armadillo5x0_nor_flash,
+ &armadillo5x0_nor_flash_pdata);
+
+ /* Register NAND Flash */
+ mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+ /* set NAND page size to 2k if not configured via boot mode pins */
+ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
}
static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927edd..9e87e08 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/common.h>
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c6f61a1..840cfda3 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -18,7 +18,7 @@
#include <linux/types.h>
#include <linux/init.h>
-
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
#include <linux/irq.h>
#include <linux/fsl_devices.h>
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
#include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+ if (!strcmp("eet", str))
+ pcm037_instance = PCM037_EET;
+ else if (strcmp("pcm970", str))
+ pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+ return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+ return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+};
static unsigned int pcm037_pins[] = {
/* I2C */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
+ MX31_PIN_CSPI2_SS2__I2C3_SDA,
+ MX31_PIN_CSPI2_SCLK__I2C3_SCL,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
/* UART2 */
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@
MX31_PIN_D3_SPL__D3_SPL,
MX31_PIN_D3_CLS__D3_CLS,
MX31_PIN_LCS0__GPI03_23,
+ /* CSI */
+ IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+ MX31_PIN_CSI_D6__CSI_D6,
+ MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8,
+ MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10,
+ MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12,
+ MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14,
+ MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+ MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+ MX31_PIN_CSI_VSYNC__CSI_VSYNC,
};
static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@
.hw_ecc = 1,
};
-#ifdef CONFIG_I2C_IMX
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
};
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+ .bitrate = 20000,
+};
+
static struct at24_platform_data board_eeprom = {
.byte_len = 4096,
.page_size = 32,
.flags = AT24_FLAG_ADDR16,
};
+static int pcm037_camera_power(struct device *dev, int on)
+{
+ /* disable or enable the camera in X7 or X8 PCM970 connector */
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+ return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+ {
+ I2C_BOARD_INFO("mt9t031", 0x5d),
+ },
+};
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .power = pcm037_camera_power,
+ .board_info = &pcm037_i2c_2_devices[0],
+ .i2c_adapter_id = 2,
+ .module_name = "mt9t031",
+};
+
static struct i2c_board_info pcm037_i2c_devices[] = {
- {
+ {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
@@ -270,7 +343,14 @@
.type = "pcf8563",
}
};
-#endif
+
+static struct platform_device pcm037_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink,
+ },
+};
/* Not connected by default */
#ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@
.exit = pcm970_sdhc1_exit,
};
+struct mx3_camera_pdata camera_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+ .mclk_10khz = 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+ dma_addr_t dma_handle;
+ void *buf;
+ int dma;
+
+ if (buf_size < 2 * 1024 * 1024)
+ return -EINVAL;
+
+ buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+ if (!buf) {
+ pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, buf_size);
+
+ dma = dma_declare_coherent_memory(&mx3_camera.dev,
+ dma_handle, dma_handle, buf_size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+ /* The way we call dma_declare_coherent_memory only a malloc can fail */
+ return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
+ &pcm037_camera,
};
static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "CMEL-OLED",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
},
};
@@ -397,6 +525,14 @@
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
+ if (pcm037_variant() == PCM037_EET)
+ mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+ ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+ else
+ mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+ ARRAY_SIZE(pcm037_uart1_handshake_pins),
+ "pcm037_uart1");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@
}
-#ifdef CONFIG_I2C_IMX
+ /* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+ mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
if (!gpio_usbotg_hs_activate())
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+ /* CSI */
+ /* Camera power: default - off */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+ if (!ret)
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+ else
+ iclink.power = NULL;
+
+ if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+ mxc_register_device(&mx3_camera, &camera_pdata);
}
static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
MACHINE_END
-
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h
new file mode 100644
index 0000000..d692972
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.h
@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+ PCM037_PCM970,
+ PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
new file mode 100644
index 0000000..fe52fb1
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+ /* SPI #1 */
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+
+ /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+ IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+ /* GPIO keys */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
+ IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
+ IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
+ IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
+ IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
+ IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
+ IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
+ IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
+
+ /* LEDs */
+ IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
+ IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
+ IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
+ IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+ {
+ .modalias = "dac124s085",
+ .max_speed_hz = 400000,
+ .bus_num = 0,
+ .chip_select = 0, /* Index in pcm037_spi1_cs[] */
+ .mode = SPI_CPHA,
+ },
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+ .chipselect = pcm037_spi1_cs,
+ .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_L,
+ .gpio = 0,
+ .desc = "Wheel Manual",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_A,
+ .gpio = 1,
+ .desc = "Wheel AF",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_V,
+ .gpio = 2,
+ .desc = "Wheel View",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_M,
+ .gpio = 3,
+ .desc = "Wheel Menu",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .gpio = 32,
+ .desc = "Nav Pad Up",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .gpio = 33,
+ .desc = "Nav Pad Right",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .gpio = 34,
+ .desc = "Nav Pad Down",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .gpio = 35,
+ .desc = "Nav Pad Left",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .gpio = 38,
+ .desc = "Nav Pad Ok",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_O,
+ .gpio = 39,
+ .desc = "Wheel Off",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_FORWARD,
+ .gpio = 50,
+ .desc = "Focus Forward",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_BACK,
+ .gpio = 51,
+ .desc = "Focus Backward",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_MIDDLE,
+ .gpio = 52,
+ .desc = "Release Half",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_EXTRA,
+ .gpio = 53,
+ .desc = "Release Full",
+ .wakeup = 0,
+ },
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+ .buttons = pcm037_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
+ .rep = 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pcm037_gpio_keys_platform_data,
+ },
+};
+
+static int eet_init_devices(void)
+{
+ if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+ return 0;
+
+ mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+ ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+ /* SPI */
+ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+ platform_device_register(&pcm037_gpio_keys_device);
+
+ return 0;
+}
+
+late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c..ed2a48a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
-#include <mach/usb.h>
#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -205,9 +204,11 @@
static struct omap_mmc_platform_data nokia770_mmc2_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
+ .max_freq = 12000000,
.slots[0] = {
.set_power = nokia770_mmc_set_power,
.get_cover_state = nokia770_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c..6810b4a 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814..505d98c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
-#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d3cc145..cf3dd77 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -25,6 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -307,6 +308,10 @@
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+ /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+ usb_nop_xceiv_register();
+#endif
usb_musb_init();
ads7846_dev_init();
}
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86..9a0bf67 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
+ .flags = ONENAND_SYNC_READWRITE,
};
static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9..54fec53 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
{
struct gpmc_timings t;
+ u32 reg;
+ int err;
const int t_cer = 15;
const int t_avdp = 12;
@@ -43,6 +45,11 @@
const int t_wpl = 40;
const int t_wph = 30;
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@@ -74,7 +81,16 @@
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- return gpmc_cs_set_timings(cs, &t);
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ /* Ensure sync read and sync write are disabled */
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+ return 0;
}
static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@
} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
sync_read = 1;
sync_write = 1;
- }
+ } else
+ return omap2_onenand_set_async_mode(cs, onenand_base);
if (!freq) {
/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e..a98201c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@
}
EXPORT_SYMBOL(omap_chip_is);
+int omap_type(void)
+{
+ u32 val = 0;
+
+ if (cpu_is_omap24xx())
+ val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+ else if (cpu_is_omap34xx())
+ val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ else {
+ pr_err("Cannot detect omap type!\n");
+ goto out;
+ }
+
+ val &= OMAP2_DEVICETYPE_MASK;
+ val >>= 8;
+
+out:
+ return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5..6f71f37 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@
return -ENOMEM;
/* DSP or IVA2 IRQ */
- mbox_dsp_info.irq = platform_get_irq(pdev, 0);
- if (mbox_dsp_info.irq < 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
- ret = -ENODEV;
goto err_dsp;
}
+ mbox_dsp_info.irq = ret;
ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
if (ret)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f04..99b6e15 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
-#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a87..1541fd4 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@
static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
int ret = 0;
- struct twl_mmc_controller *c = &hsmmc[1];
+ struct twl_mmc_controller *c = NULL;
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+ if (mmc == hsmmc[i].mmc) {
+ c = &hsmmc[i];
+ break;
+ }
+ }
+
+ if (c == NULL)
+ return -ENODEV;
/* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index d85296d..739e59e 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -155,20 +155,6 @@
.resource = musb_resources,
};
-#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
- .name = "nop_usb_xceiv",
- .id = -1,
- .dev = {
- .dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = NULL,
- },
-};
-#endif
-
void __init usb_musb_init(void)
{
if (cpu_is_omap243x())
@@ -183,13 +169,6 @@
*/
musb_plat.clock = "ick";
-#ifdef CONFIG_NOP_USB_XCEIV
- if (platform_device_register(&nop_xceiv_device) < 0) {
- printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
- return;
- }
-#endif
-
if (platform_device_register(&musb_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 63b10d9..9cd0946 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1141,12 +1141,16 @@
static void em_x270_battery_low(void)
{
+#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_LOW_BATTERY);
+#endif
}
static void em_x270_battery_critical(void)
{
+#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
}
struct da9030_battery_info em_x270_batterty_info = {
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index ae84411..7139e0d 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -567,9 +567,9 @@
#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
-#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
#endif /* CONFIG_CPU_PXA310 */
#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ed70f28..169fcc1 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -128,6 +128,10 @@
GPIO38_GPIO, /* wifi ready */
GPIO81_GPIO, /* wifi reset */
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
/* HDD */
GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index aae64a1..33f726f 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -111,6 +111,10 @@
/* PWM */
GPIO16_PWM0_OUT,
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
/* MISC */
GPIO10_GPIO, /* hotsync button */
GPIO90_GPIO, /* power detect */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 6c15d84..83d0208 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -127,6 +127,10 @@
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
+ /* FFUART */
+ GPIO34_FFUART_RXD,
+ GPIO39_FFUART_TXD,
+
/* MISC. */
GPIO10_GPIO, /* hotsync button */
GPIO12_GPIO, /* power detect */
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 6f678d9..09b7b1a 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -250,7 +250,7 @@
static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
- INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index a06f19e..753ec4d 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -409,7 +409,7 @@
static void treo680_irda_shutdown(struct device *dev)
{
- gpio_free(GPIO_NR_TREO680_AMP_EN);
+ gpio_free(GPIO_NR_TREO680_IR_EN);
}
static struct pxaficp_platform_data treo680_ficp_info = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index cefd1c0..8409544 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -197,10 +197,12 @@
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
+ gpio_free(gpio);
}
/* lcd id, flush out bit 1 */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index cc5a228..60d08f2 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -176,10 +176,12 @@
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
+ gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
+ gpio_free(gpio);
}
/* lcd id, flush out bit 1 */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05..facbd49 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -208,8 +208,7 @@
static struct i2c_board_info realview_i2c_board_info[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
- .type = "ds1338",
+ I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 8fe1920..f8b879a 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -28,7 +28,7 @@
return NULL;
chip = &s3c24xx_gpios[pin/32];
- return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+ return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc30..ec71a69 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
#include <plat/mci.h>
#include <plat/udc.h>
-#include <plat/regs-serial.h>
-
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581..0fb385b 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@
*/
.name = "neo1973-nand",
.nr_chips = 1,
- .use_bbt = 1,
- .force_soft_ecc = 1,
+ .flash_bbt = 1,
},
};
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6..111f7ea 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/io.h>
+#include <linux/seq_file.h>
#include <asm/clkdev.h>
#include <mach/hardware.h>
@@ -702,6 +703,7 @@
.rate = 52000000, /* this varies! */
.hw_ctrld = true,
.reset = false,
+ .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
};
/*
@@ -720,6 +722,7 @@
.set_rate = clk_set_rate_cpuclk,
.get_rate = clk_get_rate_cpuclk,
.round_rate = clk_round_rate_cpuclk,
+ .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
};
static struct clk nandif_clk = {
@@ -732,6 +735,7 @@
.clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
};
static struct clk semi_clk = {
@@ -744,6 +748,7 @@
.clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@
.clk_val = U300_SYSCON_SBCER_ISP_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
};
static struct clk cds_clk = {
@@ -771,6 +777,7 @@
.clk_val = U300_SYSCON_SBCER_CDS_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
};
#endif
@@ -785,6 +792,7 @@
.clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
};
static struct clk aaif_clk = {
@@ -798,6 +806,7 @@
.clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
};
static struct clk apex_clk = {
@@ -811,6 +820,7 @@
.clk_val = U300_SYSCON_SBCER_APEX_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
};
static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@
.clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
};
static struct clk xgam_clk = {
@@ -839,6 +850,7 @@
.get_rate = clk_get_rate_xgamclk,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
};
/* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_ahb_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
};
@@ -871,6 +884,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_ahb_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
};
static struct clk intcon_clk = {
@@ -882,6 +896,8 @@
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
.res_mask = U300_SYSCON_RRR_INTCON_RESET_EN,
/* INTCON can be reset but not clock-gated */
+ .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
};
static struct clk mspro_clk = {
@@ -895,6 +911,7 @@
.clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
};
static struct clk emif_clk = {
@@ -909,6 +926,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_emif_clk,
+ .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
};
@@ -926,6 +944,7 @@
.clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
};
static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@
.round_rate = clk_round_rate_mclk,
.disable = syscon_clk_disable,
.enable = syscon_clk_enable,
+ .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
};
static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
};
static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
};
static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
};
static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
};
static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
.get_rate = clk_get_rate_i2s_i2c_spi,
+ .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@
.clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
};
#endif
@@ -1044,6 +1070,7 @@
.clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
};
/* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@
.rate = 32768,
.reset = false,
/* This is always on, cannot be enabled/disabled or reset */
+ .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
};
/* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@
.clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
};
static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@
.clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
};
static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@
.clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
};
static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@
.res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
.res_mask = U300_SYSCON_RSR_RTC_RESET_EN,
/* This clock is always on, cannot be enabled/disabled */
+ .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
};
static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@
.clk_val = U300_SYSCON_SBCER_BTR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
};
static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@
.clk_val = U300_SYSCON_SBCER_EH_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
};
static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@
.clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
};
static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@
.clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
};
#ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@
.clk_val = U300_SYSCON_SBCER_PPM_CLK_EN,
.enable = syscon_clk_enable,
.disable = syscon_clk_disable,
+ .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
};
#endif
@@ -1187,53 +1224,53 @@
*/
static struct clk_lookup lookups[] = {
/* Connected directly to the AMBA bus */
- DEF_LOOKUP("amba", &amba_clk),
- DEF_LOOKUP("cpu", &cpu_clk),
- DEF_LOOKUP("nandif", &nandif_clk),
- DEF_LOOKUP("semi", &semi_clk),
+ DEF_LOOKUP("amba", &amba_clk),
+ DEF_LOOKUP("cpu", &cpu_clk),
+ DEF_LOOKUP("fsmc", &nandif_clk),
+ DEF_LOOKUP("semi", &semi_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("isp", &isp_clk),
- DEF_LOOKUP("cds", &cds_clk),
+ DEF_LOOKUP("isp", &isp_clk),
+ DEF_LOOKUP("cds", &cds_clk),
#endif
- DEF_LOOKUP("dma", &dma_clk),
- DEF_LOOKUP("aaif", &aaif_clk),
- DEF_LOOKUP("apex", &apex_clk),
+ DEF_LOOKUP("dma", &dma_clk),
+ DEF_LOOKUP("msl", &aaif_clk),
+ DEF_LOOKUP("apex", &apex_clk),
DEF_LOOKUP("video_enc", &video_enc_clk),
- DEF_LOOKUP("xgam", &xgam_clk),
- DEF_LOOKUP("ahb", &ahb_clk),
+ DEF_LOOKUP("xgam", &xgam_clk),
+ DEF_LOOKUP("ahb", &ahb_clk),
/* AHB bridge clocks */
- DEF_LOOKUP("ahb", &ahb_subsys_clk),
- DEF_LOOKUP("intcon", &intcon_clk),
- DEF_LOOKUP("mspro", &mspro_clk),
- DEF_LOOKUP("pl172", &emif_clk),
+ DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+ DEF_LOOKUP("intcon", &intcon_clk),
+ DEF_LOOKUP("mspro", &mspro_clk),
+ DEF_LOOKUP("pl172", &emif_clk),
/* FAST bridge clocks */
- DEF_LOOKUP("fast", &fast_clk),
- DEF_LOOKUP("mmci", &mmcsd_clk),
+ DEF_LOOKUP("fast", &fast_clk),
+ DEF_LOOKUP("mmci", &mmcsd_clk),
/*
* The .0 and .1 identifiers on these comes from the platform device
* .id field and are assigned when the platform devices are registered.
*/
- DEF_LOOKUP("i2s.0", &i2s0_clk),
- DEF_LOOKUP("i2s.1", &i2s1_clk),
- DEF_LOOKUP("stddci2c.0", &i2c0_clk),
- DEF_LOOKUP("stddci2c.1", &i2c1_clk),
- DEF_LOOKUP("pl022", &spi_clk),
+ DEF_LOOKUP("i2s.0", &i2s0_clk),
+ DEF_LOOKUP("i2s.1", &i2s1_clk),
+ DEF_LOOKUP("stu300.0", &i2c0_clk),
+ DEF_LOOKUP("stu300.1", &i2c1_clk),
+ DEF_LOOKUP("pl022", &spi_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("uart1", &uart1_clk),
+ DEF_LOOKUP("uart1", &uart1_clk),
#endif
/* SLOW bridge clocks */
- DEF_LOOKUP("slow", &slow_clk),
- DEF_LOOKUP("wdog", &wdog_clk),
- DEF_LOOKUP("uart0", &uart_clk),
- DEF_LOOKUP("apptimer", &app_timer_clk),
- DEF_LOOKUP("keypad", &keypad_clk),
+ DEF_LOOKUP("slow", &slow_clk),
+ DEF_LOOKUP("coh901327_wdog", &wdog_clk),
+ DEF_LOOKUP("uart0", &uart_clk),
+ DEF_LOOKUP("apptimer", &app_timer_clk),
+ DEF_LOOKUP("coh901461-keypad", &keypad_clk),
DEF_LOOKUP("u300-gpio", &gpio_clk),
- DEF_LOOKUP("rtc0", &rtc_clk),
- DEF_LOOKUP("bustr", &bustr_clk),
- DEF_LOOKUP("evhist", &evhist_clk),
- DEF_LOOKUP("timer", &timer_clk),
+ DEF_LOOKUP("rtc-coh901331", &rtc_clk),
+ DEF_LOOKUP("bustr", &bustr_clk),
+ DEF_LOOKUP("evhist", &evhist_clk),
+ DEF_LOOKUP("timer", &timer_clk),
#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("ppm", &ppm_clk),
+ DEF_LOOKUP("ppm", &ppm_clk),
#endif
};
@@ -1427,16 +1464,20 @@
.release = single_release,
};
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
{
/* Expose a simple debugfs interface to view all clocks */
(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
- NULL, NULL, &u300_clocks_operations);
+ NULL, NULL,
+ &u300_clocks_operations);
+ return 0;
}
-#else
-static inline void init_clk_read_procfs(void)
-{
-}
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
#endif
static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@
clk_register();
- init_clk_read_procfs();
-
/*
* Some of these may be on when we boot the system so make sure they
* are turned OFF.
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 89b3ccf..7936085 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -455,8 +455,8 @@
for (i = 0; i < NR_IRQS; i++)
set_bit(i, (unsigned long *) &mask[0]);
u300_enable_intcon_clock();
- vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
- vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+ vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+ vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc..31093af 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -342,8 +342,7 @@
static struct i2c_board_info versatile_i2c_board_info[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
- .type = "ds1338",
+ I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48e..ac5c800 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@
EXPORT_SYMBOL(__cpuc_flush_user_all);
EXPORT_SYMBOL(__cpuc_flush_user_range);
EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */
#else
EXPORT_SYMBOL(cpu_cache);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 27f8d1b..2eb182f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -602,6 +602,8 @@
#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec..7677a4a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@
setup_irq(irq, &omap24xx_dma_irq);
}
+ /* Enable smartidle idlemodes and autoidle */
+ if (cpu_is_omap34xx()) {
+ u32 v = dma_read(OCP_SYSCONFIG);
+ v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+ DMA_SYSCONFIG_SIDLEMODE_MASK |
+ DMA_SYSCONFIG_AUTOIDLE);
+ v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_AUTOIDLE);
+ dma_write(v , OCP_SYSCONFIG);
+ }
+
+
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba..26b387c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@
__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+ __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
/* Initialize interface clock ungated, module enabled */
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4e..285eaa3 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
struct omap_chip_id {
u8 oc;
u8 type;
@@ -424,17 +435,6 @@
int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae8..7b939cc 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
#define DMA_THREAD_FIFO_25 (0x02 << 14)
#define DMA_THREAD_FIFO_50 (0x03 << 14)
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
+#define DMA_SYSCONFIG_EMUFREE (1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE 0x2
+#define DMA_IDLEMODE_NO_IDLE 0x1
+#define DMA_IDLEMODE_FORCE_IDLE 0x0
+
/* Chaining modes*/
#ifndef CONFIG_ARCH_OMAP1
#define OMAP_DMA_STATIC_CHAIN 0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b28147..73f483d 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
-#define IOMEM(x) x
+#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449f..4a03013 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
-
+ iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df..4ea7380 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@
if (cpu_is_omap34xx()) {
omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
- omap_sram_size = 0x8000; /* 32K */
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
} else {
omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index abc79d4..98548c6 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -16,7 +16,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <mach/gpio.h>
@@ -112,17 +112,12 @@
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
- /* this is early, we have to use bootmem allocator, and we really
- * want this to be allocated dynamically for different 'gpio_end'
- */
- chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+ chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
if (chips == NULL) {
pr_err("%s: failed to allocate GPIO chips\n", __func__);
return -ENOMEM;
}
- memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb..0761766 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d..2e17082 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb127..579a165 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_HAVE_PWM) += pwm.o
+obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 0120b76..82a6d4d 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -246,6 +246,10 @@
tcmp = duty_ns / tin_ns;
tcmp = tcnt - tcmp;
+ /* the pwm hw only checks the compare register after a decrement,
+ so the pin never toggles if tcmp = tcnt */
+ if (tcmp == tcnt)
+ tcmp--;
pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf789..da7a617 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc..86b9edc 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
*/
#include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
index 07a6516..47632fc 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -117,8 +117,6 @@
* this.
*/
-#include <plat/regs-gpio.h>
-
static void s3c64xx_cpu_suspend(void)
{
unsigned long tmp;
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 1debc1f..febac19 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -153,7 +153,7 @@
u32 div;
if (parent < rate)
- return rate;
+ return parent;
div = (parent / rate) - 1;
if (div > armclk_mask)
@@ -175,7 +175,7 @@
div = clk_get_rate(clk->parent) / rate;
val = __raw_readl(S3C_CLK_DIV0);
- val &= armclk_mask;
+ val &= ~armclk_mask;
val |= (div - 1);
__raw_writel(val, S3C_CLK_DIV0);
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d412003..6d6b1a4 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
#include <linux/sysdev.h>
#include <linux/string.h>
#include <linux/bitops.h>
-#include <linux/sysdev.h>
#include <linux/irq.h>
#include <mach/hardware.h>
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 6408213..92ecd84 100644
--- a/arch/avr32/include/asm/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -83,7 +83,7 @@
quicklist_free_page(QUICK_PT, NULL, pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 4442f8d..fc42de5 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -40,7 +40,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall \
} \
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491..b91b204 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@
spin_lock_irq(&die_lock);
bust_spinlocks(1);
- printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
str, err, ++die_counter);
+
+ printk(KERN_EMERG);
+
#ifdef CONFIG_PREEMPT
- printk("PREEMPT ");
+ printk(KERN_CONT "PREEMPT ");
#endif
#ifdef CONFIG_FRAME_POINTER
- printk("FRAME_POINTER ");
+ printk(KERN_CONT "FRAME_POINTER ");
#endif
if (current_cpu_data.features & AVR32_FEATURE_OCD) {
unsigned long did = ocd_read(DID);
- printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+ printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
(did >> 1) & 0x7ff,
(did >> 12) & 0x7fff,
(did >> 28) & 0xf);
} else {
- printk("cpu: arch %u r%u / core %u r%u\n",
+ printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
current_cpu_data.arch_type,
current_cpu_data.arch_revision,
current_cpu_data.cpu_type,
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 16561ab..f8a664f 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -223,9 +223,10 @@
[--sp] = RETN;
[--sp] = RETE;
[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
- r1.l = lo(IPEND);
- r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+ p1.l = lo(IPEND);
+ p1.h = hi(IPEND);
+ r1 = [p1];
[--sp] = r1;
#else
[--sp] = r0; /* Skip IPEND as well. */
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 565b813..fadfa82 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -32,7 +32,6 @@
struct task_struct *idle;
unsigned int imemctl;
unsigned int dmemctl;
- unsigned long loops_per_jiffy;
unsigned long dcache_invld_count;
unsigned long icache_invld_count;
};
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index cbd52f8..0b78b87 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -6,6 +6,9 @@
extern void ack_bad_irq(unsigned int irq);
#define ack_bad_irq ack_bad_irq
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
#include <asm-generic/hardirq.h>
#endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index d0be99b..a36ad8d 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -105,23 +105,16 @@
/* Always use CHIPID, to work around ANOMALY_05000234 */
uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
-#ifdef CONFIG_BF52x
- /* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+ /*
+ * ANOMALY_05000364
* Incorrect Revision Number in DSPID Register
*/
- if (revid == 0)
- switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
- case 0x0010:
- revid = 0;
- break;
- case 0x2796:
- revid = 1;
- break;
- default:
- revid = 0xFFFF;
- break;
- }
+ if (ANOMALY_05000364 &&
+ bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+ revid = 1;
#endif
+
return revid;
}
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2920087..2bbfdd9 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -77,7 +77,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index e0bf8cc..9f9b828 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -253,32 +253,31 @@
BUG_ON(src % 4);
BUG_ON(size % 4);
+ src_ch = 0;
+ /* Find an avalible memDMA channel */
+ while (1) {
+ if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
+ dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
+ src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+ } else {
+ dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+ src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
+ }
+
+ if (!bfin_read16(&src_ch->cfg))
+ break;
+ else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+ bfin_write16(&src_ch->cfg, 0);
+ break;
+ }
+ }
+
/* Force a sync in case a previous config reset on this channel
* occurred. This is needed so subsequent writes to DMA registers
* are not spuriously lost/corrupted.
*/
__builtin_bfin_ssync();
- src_ch = 0;
- /* Find an avalible memDMA channel */
- while (1) {
- if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
- dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
- src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
- } else {
- dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
- src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
- }
-
- if (!bfin_read16(&src_ch->cfg)) {
- break;
- } else {
- if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
- bfin_write16(&src_ch->cfg, 0);
- }
-
- }
-
/* Destination */
bfin_write32(&dst_ch->start_addr, dst);
bfin_write16(&dst_ch->x_count, size >> 2);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index beffa00..6b94462 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -686,14 +686,12 @@
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+ & gpio_bank_saved[bank].dir;
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
gpio_array[bank]->both = gpio_bank_saved[bank].both;
-
- gpio_array[bank]->data_set = gpio_bank_saved[bank].data
- | gpio_bank_saved[bank].dir;
-
gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
}
AWA_DUMMY_READ(maska);
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index d6c0677..685f160 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -72,13 +72,24 @@
}
/* Cover L1 memory. One 4M area for code and data each is enough. */
- if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
- d_tbl[i_d].addr = L1_DATA_A_START;
- d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+ if (cpu == 0) {
+ if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+ d_tbl[i_d].addr = L1_DATA_A_START;
+ d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+ }
+ i_tbl[i_i].addr = L1_CODE_START;
+ i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
}
- i_tbl[i_i].addr = L1_CODE_START;
- i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+ else {
+ if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+ d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+ d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+ }
+ i_tbl[i_i].addr = COREB_L1_CODE_START;
+ i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+ }
+#endif
first_switched_dcplb = i_d;
first_switched_icplb = i_i;
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 79cad0a..9da36ba 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -361,7 +361,7 @@
int in_mem_const(unsigned long addr, unsigned long size,
unsigned long const_addr, unsigned long const_size)
{
- return in_mem_const_off(addr, 0, size, const_addr, const_size);
+ return in_mem_const_off(addr, size, 0, const_addr, const_size);
}
#define IN_ASYNC(bnum, bctlnum) \
({ \
@@ -390,13 +390,13 @@
if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#ifdef COREB_L1_CODE_START
- if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
- if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
- if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#endif
if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@
if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
return 1;
#ifdef COREB_L1_CODE_START
- if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return 1;
- if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
return 1;
- if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+ if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return 1;
#endif
if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index d76618d..6a387ee 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -31,7 +31,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023..6225eda 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -168,7 +168,6 @@
struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
cpudata->idle = current;
- cpudata->loops_per_jiffy = loops_per_jiffy;
cpudata->imemctl = bfin_read_IMEM_CONTROL();
cpudata->dmemctl = bfin_read_DMEM_CONTROL();
}
@@ -408,13 +407,14 @@
bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
switch (bfin_memmap.map[i].type) {
case BFIN_MEMMAP_RAM:
- printk("(usable)\n");
- break;
+ printk(KERN_CONT "(usable)\n");
+ break;
case BFIN_MEMMAP_RESERVED:
- printk("(reserved)\n");
- break;
- default: printk("type %lu\n", bfin_memmap.map[i].type);
- break;
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+ break;
}
}
}
@@ -567,17 +567,23 @@
# endif /* ANOMALY_05000263 */
# endif /* CONFIG_ROMFS_FS */
- memory_end -= mtd_size;
+ /* Since the default MTD_UCLINUX has no magic number, we just blindly
+ * read 8 past the end of the kernel's image, and look at it.
+ * When no image is attached, mtd_size is set to a random number
+ * Do some basic sanity checks before operating on things
+ */
+ if (mtd_size == 0 || memory_end <= mtd_size) {
+ pr_emerg("Could not find valid ram mtd attached.\n");
+ } else {
+ memory_end -= mtd_size;
- if (mtd_size == 0) {
- console_init();
- panic("Don't boot kernel without rootfs attached.");
+ /* Relocate MTD image to the top of memory after the uncached memory area */
+ uclinux_ram_map.phys = memory_mtd_start = memory_end;
+ uclinux_ram_map.size = mtd_size;
+ pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+ _end, mtd_size, (void *)memory_mtd_start);
+ dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
}
-
- /* Relocate MTD image to the top of memory after the uncached memory area */
- uclinux_ram_map.phys = memory_mtd_start = memory_end;
- uclinux_ram_map.size = mtd_size;
- dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@@ -614,19 +620,19 @@
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
printk(KERN_INFO "Memory map:\n"
- KERN_INFO " fixedcode = 0x%p-0x%p\n"
- KERN_INFO " text = 0x%p-0x%p\n"
- KERN_INFO " rodata = 0x%p-0x%p\n"
- KERN_INFO " bss = 0x%p-0x%p\n"
- KERN_INFO " data = 0x%p-0x%p\n"
- KERN_INFO " stack = 0x%p-0x%p\n"
- KERN_INFO " init = 0x%p-0x%p\n"
- KERN_INFO " available = 0x%p-0x%p\n"
+ " fixedcode = 0x%p-0x%p\n"
+ " text = 0x%p-0x%p\n"
+ " rodata = 0x%p-0x%p\n"
+ " bss = 0x%p-0x%p\n"
+ " data = 0x%p-0x%p\n"
+ " stack = 0x%p-0x%p\n"
+ " init = 0x%p-0x%p\n"
+ " available = 0x%p-0x%p\n"
#ifdef CONFIG_MTD_UCLINUX
- KERN_INFO " rootfs = 0x%p-0x%p\n"
+ " rootfs = 0x%p-0x%p\n"
#endif
#if DMA_UNCACHED_REGION > 0
- KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+ " DMA Zone = 0x%p-0x%p\n"
#endif
, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
_stext, _etext,
@@ -859,20 +865,13 @@
#endif
printk(KERN_INFO "Hardware Trace ");
if (bfin_read_TBUFCTL() & 0x1)
- printk("Active ");
+ printk(KERN_CONT "Active ");
else
- printk("Off ");
+ printk(KERN_CONT "Off ");
if (bfin_read_TBUFCTL() & 0x2)
- printk("and Enabled\n");
+ printk(KERN_CONT "and Enabled\n");
else
- printk("and Disabled\n");
-
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
- /* we need to initialize the Flashrom device here since we might
- * do things with flash early on in the boot
- */
- flash_probe();
-#endif
+ printk(KERN_CONT "and Disabled\n");
printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
@@ -937,10 +936,6 @@
CPU, bfin_revid());
}
- /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
- if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
- panic("You can't run on this processor due to 05000448");
-
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1163,9 +1158,9 @@
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
"Calibration\t: %lu loops\n",
- (cpudata->loops_per_jiffy * HZ) / 500000,
- ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
- (cpudata->loops_per_jiffy * HZ));
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
/* Check Cache configutation */
switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index a8f1329..3da60fb 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -29,7 +29,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/sem.h>
#include <linux/msg.h>
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457..bf2b2d1 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@
console_verbose();
oops_in_progress = 1;
#ifdef CONFIG_DEBUG_VERBOSE
- printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+ printk(KERN_EMERG "Double Fault\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) {
unsigned int cpu = smp_processor_id();
@@ -570,11 +570,12 @@
if (kernel_mode_regs(fp) || (current && !current->mm)) {
console_verbose();
oops_in_progress = 1;
- if (strerror)
- verbose_printk(strerror);
}
if (sig != SIGTRAP) {
+ if (strerror)
+ verbose_printk(strerror);
+
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
@@ -583,15 +584,14 @@
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
verbose_printk(KERN_NOTICE "No trace since you do not have "
- "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
- KERN_NOTICE "\n");
+ "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
else
#endif
dump_bfin_trace_buffer();
if (oops_in_progress) {
/* Dump the current kernel stack */
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+ verbose_printk(KERN_NOTICE "Kernel Stack\n");
show_stack(current, NULL);
print_modules();
#ifndef CONFIG_ACCESS_CHECK
@@ -620,7 +620,9 @@
force_sig_info(sig, &info, current);
}
- if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+ if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+ (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+ (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
fp->pc = SAFE_USER_INSTRUCTION;
traps_done:
@@ -906,7 +908,7 @@
ret_addr = 0;
if (!j && i % 8 == 0)
- printk("\n" KERN_NOTICE "%p:",addr);
+ printk(KERN_NOTICE "%p:",addr);
/* if it is an odd address, or zero, just skip it */
if (*addr & 0x1 || !*addr)
@@ -996,9 +998,9 @@
printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
- verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_NOTICE "\n",
+ verbose_printk(KERN_NOTICE
+ "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ " BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
(void *)current->mm->start_code,
(void *)current->mm->end_code,
(void *)current->mm->start_data,
@@ -1009,8 +1011,8 @@
else
verbose_printk(KERN_NOTICE "invalid mm\n");
} else
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
- "No Valid process in current context\n");
+ verbose_printk(KERN_NOTICE
+ "No Valid process in current context\n");
#endif
}
@@ -1028,7 +1030,7 @@
addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
addr++) {
if (!((unsigned long)addr & 0xF))
- verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+ verbose_printk(KERN_NOTICE "0x%p: ", addr);
if (!get_instruction(&val, addr)) {
val = 0;
@@ -1056,9 +1058,9 @@
oops_in_progress)){
verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
#ifndef CONFIG_DEBUG_HWERR
- verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
- KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
- " better idea where it came from\n");
+ verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
#else
/* If we are handling only one peripheral interrupt
* and current mm and pid are valid, and the last error
@@ -1114,9 +1116,10 @@
verbose_printk(KERN_NOTICE "%s", linux_banner);
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+ verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+ print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
- (long)fp->seqstat, fp->ipend, fp->syscfg);
+ (long)fp->seqstat, fp->ipend, fp->syscfg);
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1187,7 @@
verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
verbose_printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
verbose_printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index 84b9c55..e57bf6f 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -27,21 +27,7 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
- SItype high, low;
-};
-
-typedef union {
- struct DIstruct s;
- DItype ll;
-} DIunion;
+#include "gcclib.h"
#ifdef CONFIG_ARITHMETIC_OPS_L1
DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d979110..809be26 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -534,7 +534,7 @@
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 426e064..753ed81 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -82,6 +82,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
#define ANOMALY_05000357 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index 0fb2ce5..dbade93 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f4867ce..b09484f 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -793,7 +793,7 @@
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index b2f30f0..2ad68cd 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -591,7 +591,7 @@
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 799a1d1..75e563d 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -858,7 +858,7 @@
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 0d63f74..c438ca8 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -176,6 +176,8 @@
#define ANOMALY_05000443 (1)
/* The WURESET Bit in the SYSCR Register is not Functional */
#define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
#define ANOMALY_05000451 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659..ebd6ceb 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a68ade8..3d743cc 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -453,7 +453,7 @@
.irq = 39,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 70a0ad6..cd83db2 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -335,6 +335,7 @@
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index a3789d7..4062e24 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c1f76dd..bd65690 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1313,10 +1313,10 @@
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
- .irq = IRQ_PF5,
+ .irq = IRQ_PG5,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 57c128c..e66aa13 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -167,6 +167,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b86662f..e95d54f 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index c97acdf..451cf8a 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -137,6 +137,7 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index c536551..999f239 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 81f5b95..dc0dd9b 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -864,7 +864,7 @@
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 18a4cd24..cd040fe 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -195,6 +195,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000400 (0)
#define ANOMALY_05000412 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 94b8e27..a5312b2 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -288,6 +288,7 @@
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index a1b5087..fd5e887 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index a63e15c..5b96ea5 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -37,7 +37,6 @@
/* Memory Map for ADSP-BF561 processors */
-#ifdef CONFIG_BF561
#define COREA_L1_CODE_START 0xFFA00000
#define COREA_L1_DATA_A_START 0xFF800000
#define COREA_L1_DATA_B_START 0xFF900000
@@ -74,6 +73,28 @@
#define BFIN_DCACHESIZE (0*1024)
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A. If we aren't, then we assume Core B is not
+ * using any cache. This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler. Easier to check one region than a
+ * bunch of small ones. Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH 0x14000
+# define COREB_L1_DATA_A_LENGTH 0x8000
+# define COREB_L1_DATA_B_LENGTH 0x8000
#endif
/* Level 2 Memory */
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 5a4e7c7..fb1795d 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -218,7 +218,7 @@
/* Single stepping only a single instruction, so clear the trace
* bit here. */
r7 = syscfg;
- bitclr (r7, 0);
+ bitclr (r7, SYSCFG_SSSTEP_P);
syscfg = R7;
jump _ex_trap_c;
@@ -251,7 +251,7 @@
if !cc jump _bfin_return_from_exception;
r7 = syscfg;
- bitclr (r7, 0);
+ bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */
syscfg = R7;
/* Fall through to _bfin_return_from_exception. */
@@ -342,9 +342,11 @@
r6 = retx;
[p5 + PDA_RETX] = r6;
#endif
+ /* Save the state of single stepping */
r6 = SYSCFG;
[p5 + PDA_SYSCFG] = r6;
- BITCLR(r6, 0);
+ /* Clear it while we handle the exception in IRQ5 mode */
+ BITCLR(r6, SYSCFG_SSSTEP_P);
SYSCFG = r6;
/* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@
* exception. This is a unrecoverable event, so crash.
* Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
*/
-_double_fault:
+ENTRY(_double_fault)
/* Turn caches & protection off, to ensure we don't get any more
* double exceptions
*/
@@ -872,7 +874,7 @@
raise 15; /* raise evt15 to do signal or reschedule */
4:
r0 = syscfg;
- bitclr(r0, 0);
+ bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */
syscfg = r0;
5:
rts;
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 6184005..349ee3f 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -211,6 +211,8 @@
return 0;
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return -ENOMEM;
INIT_LIST_HEAD(&msg->list);
msg->call_struct.func = func;
msg->call_struct.info = info;
@@ -252,6 +254,8 @@
cpu_set(cpu, callmap);
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return -ENOMEM;
INIT_LIST_HEAD(&msg->list);
msg->call_struct.func = func;
msg->call_struct.info = info;
@@ -287,6 +291,8 @@
return;
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return;
memset(msg, 0, sizeof(msg));
INIT_LIST_HEAD(&msg->list);
msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@
return;
msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+ if (!msg)
+ return;
memset(msg, 0, sizeof(msg));
INIT_LIST_HEAD(&msg->list);
msg->type = BFIN_IPI_CPU_STOP;
@@ -450,7 +458,7 @@
unsigned int cpu;
for_each_online_cpu(cpu)
- bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+ bogosum += loops_per_jiffy;
printk(KERN_INFO "SMP: Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h
index a1ba761..6da975d 100644
--- a/arch/cris/include/asm/pgalloc.h
+++ b/arch/cris/include/asm/pgalloc.h
@@ -47,7 +47,7 @@
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index bc5b293..c3aade3 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -50,8 +50,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
#define INIT_THREAD_INFO(tsk) \
@@ -60,7 +58,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index a79fbd8..2ad962c 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -15,7 +15,6 @@
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a..b86e19c 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@
default y
select HAVE_IDE
select HAVE_ARCH_TRACEHOOK
+ select HAVE_PERF_COUNTERS
config ZONE_DMA
bool
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d98..00a57af 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@
#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+ volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+ long long counter;
+
+ asm("ldd%I1 %M1,%0"
+ : "=e"(counter)
+ : "m"(v->counter));
+ return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ asm volatile("std%I0 %1,%M0"
+ : "=m"(v->counter)
+ : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+ return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+ atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+ atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+ atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+ atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0)
+
/*****************************************************************************/
/*
* exchange value with memory
*/
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define xchg(ptr, x) \
@@ -174,8 +236,10 @@
#define tas(ptr) (xchg((ptr), 1))
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new) (xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter))
static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
{
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 0000000..ccf726e
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
index 971e6ad..416d19a 100644
--- a/arch/frv/include/asm/pgalloc.h
+++ b/arch/frv/include/asm/pgalloc.h
@@ -49,7 +49,7 @@
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb),(pte)); \
@@ -62,7 +62,7 @@
*/
#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); })
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
+#define __pmd_free_tlb(tlb,x,a) do { } while (0)
#endif /* CONFIG_MMU */
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 3323301..22c6069 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -225,7 +225,7 @@
*/
#define pud_alloc_one(mm, address) NULL
#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
+#define __pud_free_tlb(tlb, x, address) do { } while (0)
/*
* The "pud_xxx()" functions here are trivial for a folded two-level
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec0..efd22d9 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@
* - if (*ptr == test) then orig = *ptr; *ptr = test;
* - if (*ptr != test) then orig = *ptr;
*/
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
#define cmpxchg(ptr, test, new) \
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e8a5ed7..e608e05 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -56,8 +56,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -67,7 +65,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5..4a8fb42 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
#define __NR_inotify_init1 332
#define __NR_preadv 333
#define __NR_pwritev 334
+#define __NR_rt_tgsigqueueinfo 335
+#define __NR_perf_counter_open 336
#ifdef __KERNEL__
-#define NR_syscalls 335
+#define NR_syscalls 337
#define __ARCH_WANT_IPC_PARSE_VERSION
/* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e3..fde1e44 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
+ .long sys_rt_tgsigqueueinfo /* 335 */
+ .long sys_perf_counter_open
syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c..a89803b 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@
EXPORT_SYMBOL(__xchg_32);
EXPORT_SYMBOL(__cmpxchg_32);
#endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
EXPORT_SYMBOL(__debug_bug_printk);
EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305..0a37721 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
lib-y := \
__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
- checksum.o memcpy.o memset.o atomic-ops.o \
- outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+ checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
+ outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac90..5e9e6ab 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@
ld.p @(gr11,gr0),gr8
orcr cc7,cc7,cc3
subcc gr8,gr9,gr7,icc0
- bne icc0,#0,1f
+ bnelr icc0,#0
cst.p gr10,@(gr11,gr0) ,cc3,#1
corcc gr29,gr29,gr0 ,cc3,#1
beq icc3,#0,0b
-1:
bralr
.size __cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 0000000..b6194ee
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ * Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+ .text
+ .balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_inc_return
+ .type atomic64_inc_return,@function
+atomic64_inc_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addicc gr9,#1,gr9,icc0
+ addxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_dec_return
+ .type atomic64_dec_return,@function
+atomic64_dec_return:
+ or.p gr8,gr8,gr10
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subicc gr9,#1,gr9,icc0
+ subxi gr8,#0,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_add_return
+ .type atomic64_add_return,@function
+atomic64_add_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ addcc gr9,gr5,gr9,icc0
+ addx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+ .globl atomic64_sub_return
+ .type atomic64_sub_return,@function
+atomic64_sub_return:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ subcc gr9,gr5,gr9,icc0
+ subx gr8,gr4,gr8,icc0
+ cstd.p gr8,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+ .globl __xchg_64
+ .type __xchg_64,@function
+__xchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3 /* set CC3 to true */
+ cstd.p gr4,@(gr10,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+ .globl __cmpxchg_64
+ .type __cmpxchg_64,@function
+__cmpxchg_64:
+ or.p gr8,gr8,gr4
+ or gr9,gr9,gr5
+0:
+ orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */
+ ckeq icc3,cc7
+ ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */
+ orcr cc7,cc7,cc3
+ subcc gr8,gr4,gr0,icc0
+ subcc.p gr9,gr5,gr0,icc1
+ bnelr icc0,#0
+ bnelr icc1,#0
+ cstd.p gr10,@(gr12,gr0) ,cc3,#1
+ corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */
+ beq icc3,#0,0b
+ bralr
+
+ .size __cmpxchg_64, .-__cmpxchg_64
+
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 0000000..2000fee
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 700014d..8bbc8b0 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -36,7 +36,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 58a7e46a..e7cbaa0 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -41,11 +41,6 @@
ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
endif
-ifeq ($(call cc-version),0304)
- cflags-$(CONFIG_ITANIUM) += -mtune=merced
- cflags-$(CONFIG_MCKINLEY) += -mtune=mckinley
-endif
-
KBUILD_CFLAGS += $(cflags-y)
head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
index e2ca800..57a2787 100644
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -286,7 +286,7 @@
{
__u32 *p = (__u32 *) addr + (nr >> 5);
__u32 m = 1 << (nr & 31);
- int oldbitset = *p & m;
+ int oldbitset = (*p & m) != 0;
*p &= ~m;
return oldbitset;
diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
index 0c26157..b6395ad 100644
--- a/arch/ia64/include/asm/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
@@ -6,6 +6,8 @@
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/types.h>
+
/* floating point status register: */
#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */
#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6..96a8d92 100644
--- a/arch/ia64/include/asm/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -48,7 +48,7 @@
{
quicklist_free(0, NULL, pud);
}
-#define __pud_free_tlb(tlb, pud) pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address) pud_free((tlb)->mm, pud)
#endif /* CONFIG_PGTABLE_4 */
static inline void
@@ -67,7 +67,7 @@
quicklist_free(0, NULL, pmd);
}
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd)
static inline void
pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
@@ -117,6 +117,6 @@
quicklist_trim(0, NULL, 25, 16);
}
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
#endif /* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 0a9cc73..8840a69 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -155,7 +155,6 @@
#include <linux/bitops.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
-#include <asm/processor.h>
/*
* Next come the mappings that determine how mmap() protection bits
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ae69226..8ce2e38 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -48,7 +48,7 @@
.flags = 0, \
.cpu = 0, \
.addr_limit = KERNEL_DS, \
- .preempt_count = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39..85d965c 100644
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -236,22 +236,22 @@
__tlb_remove_tlb_entry(tlb, ptep, addr); \
} while (0)
-#define pte_free_tlb(tlb, ptep) \
+#define pte_free_tlb(tlb, ptep, address) \
do { \
tlb->need_flush = 1; \
- __pte_free_tlb(tlb, ptep); \
+ __pte_free_tlb(tlb, ptep, address); \
} while (0)
-#define pmd_free_tlb(tlb, ptep) \
+#define pmd_free_tlb(tlb, ptep, address) \
do { \
tlb->need_flush = 1; \
- __pmd_free_tlb(tlb, ptep); \
+ __pmd_free_tlb(tlb, ptep, address); \
} while (0)
-#define pud_free_tlb(tlb, pudp) \
+#define pud_free_tlb(tlb, pudp, address) \
do { \
tlb->need_flush = 1; \
- __pud_free_tlb(tlb, pudp); \
+ __pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif /* _ASM_IA64_TLB_H */
diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
index e425227..88afb54 100644
--- a/arch/ia64/include/asm/xen/hypervisor.h
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -33,6 +33,7 @@
#ifndef _ASM_IA64_XEN_HYPERVISOR_H
#define _ASM_IA64_XEN_HYPERVISOR_H
+#include <linux/err.h>
#include <xen/interface/xen.h>
#include <xen/interface/version.h> /* to compile feature.c */
#include <xen/features.h> /* to comiple xen-netfront.c */
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 086a2ae..39a3cd0 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -6,6 +6,14 @@
struct dma_map_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+}
+fs_initcall(dma_init);
+
struct dma_map_ops *dma_get_ops(struct device *dev)
{
return dma_ops;
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e98..d5764a3 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@
}
if (!esi)
- return -ENODEV;;
+ return -ENODEV;
systab = __va(esi);
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 2d31186..8ebccb5 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -21,6 +21,7 @@
#include <asm/page.h>
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
#ifdef CONFIG_VIRTUAL_MEM_MAP
#include <linux/bootmem.h>
@@ -60,9 +61,6 @@
EXPORT_SYMBOL(__moddi3);
EXPORT_SYMBOL(__umoddi3);
-#include <asm/page.h>
-EXPORT_SYMBOL(copy_page);
-
#if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE)
extern void xor_ia64_2(void);
extern void xor_ia64_3(void);
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index c48b03f..dab4d39 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -1072,6 +1072,10 @@
}
addr = ioremap(phys_addr, 0);
+ if (addr == NULL) {
+ spin_unlock_irqrestore(&iosapic_lock, flags);
+ return -ENOMEM;
+ }
ver = iosapic_version(addr);
if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
iounmap(addr);
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index 0569596..f6b1ff0 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -69,11 +69,6 @@
int iommu_dma_supported(struct device *dev, u64 mask)
{
- struct dma_map_ops *ops = platform_dma_get_ops(dev);
-
- if (ops->dma_supported)
- return ops->dma_supported(dev, mask);
-
/* Copied from i386. Doesn't make much sense, because it will
only work for pci_alloc_coherent.
The caller just has to use GFP_DMA in this case. */
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce246..f178270 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@
* /proc/perfmon interface, for debug only
*/
-#define PFM_PROC_SHOW_HEADER ((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER ((void *)(long)nr_cpu_ids+1)
static void *
pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 92c9689..9daa87f 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -15,7 +15,6 @@
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
-#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
#include <linux/audit.h>
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55..e6676fc 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@
static void
salinfo_work_to_do(struct salinfo_data *data)
{
- down_trylock(&data->mutex);
+ (void)(down_trylock(&data->mutex) ?: 0);
up(&data->mutex);
}
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index bc80dff..8f06035 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -372,6 +372,10 @@
retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj,
&cache_ktype_percpu_entry, &sys_dev->kobj,
"%s", "cache");
+ if (unlikely(retval < 0)) {
+ cpu_cache_sysfs_exit(cpu);
+ return retval;
+ }
for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
this_object = LEAF_KOBJECT_PTR(cpu,i);
@@ -385,7 +389,7 @@
}
kobject_put(&all_cpu_cache_info[cpu].kobj);
cpu_cache_sysfs_exit(cpu);
- break;
+ return retval;
}
kobject_uevent(&(this_object->kobj), KOBJ_ADD);
}
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb61..f1268b8 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
*
*/
#undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
#include "../../../lib/vsprintf.c"
#include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 21f63ff..9bf55af 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -247,7 +247,8 @@
vcpu_get_fpreg(vcpu, inst.M9.f2, &v);
/* Write high word. FIXME: this is a kludge! */
v.u.bits[1] &= 0x3ffff;
- mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+ mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1], 8,
+ ma, IOREQ_WRITE);
data = v.u.bits[0];
size = 3;
} else if (inst.M10.major == 7 && inst.M10.x6 == 0x3B) {
@@ -265,7 +266,8 @@
/* Write high word.FIXME: this is a kludge! */
v.u.bits[1] &= 0x3ffff;
- mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+ mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1],
+ 8, ma, IOREQ_WRITE);
data = v.u.bits[0];
size = 3;
} else if (inst.M10.major == 7 && inst.M10.x6 == 0x31) {
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da..bb862fb 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@
if (vdcr & IA64_DCR_PP) {
vpsr |= IA64_PSR_PP;
} else {
- vpsr &= ~IA64_PSR_PP;;
+ vpsr &= ~IA64_PSR_PP;
}
vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
break;
case PAL_BRAND_INFO:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
break;
default:
- p->u.pal_data.gr29 = gr29;;
+ p->u.pal_data.gr29 = gr29;
p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
}
p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15..cc406d0 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@
* Now look at registers in [0-31] range and init correct UNAT
*/
addr = (unsigned long)regs;
- unat = ®s->eml_unat;;
+ unat = ®s->eml_unat;
addr += gr_info[regnum];
@@ -461,7 +461,7 @@
u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg)
{
struct kvm_pt_regs *regs = vcpu_regs(vcpu);
- u64 val;
+ unsigned long val;
if (!reg)
return 0;
@@ -469,7 +469,7 @@
return val;
}
-void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 value, int nat)
+void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg, u64 value, int nat)
{
struct kvm_pt_regs *regs = vcpu_regs(vcpu);
long sof = (regs->cr_ifs) & 0x7f;
@@ -1072,7 +1072,7 @@
vcpu_set_gr(vcpu, inst.M46.r1, tag, 0);
}
-int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, u64 *padr)
+int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, unsigned long *padr)
{
struct thash_data *data;
union ia64_isr visr, pt_isr;
diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h
index 042af92..360724d 100644
--- a/arch/ia64/kvm/vcpu.h
+++ b/arch/ia64/kvm/vcpu.h
@@ -686,14 +686,15 @@
return highest_bits((int *)&(VMX(vcpu, insvc[0])));
}
-extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
struct ia64_fpreg *val);
-extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
struct ia64_fpreg *val);
-extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, u64 reg);
-extern void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 val, int nat);
-extern u64 vcpu_get_psr(struct kvm_vcpu *vcpu);
-extern void vcpu_set_psr(struct kvm_vcpu *vcpu, u64 val);
+extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg);
+extern void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg,
+ u64 val, int nat);
+extern unsigned long vcpu_get_psr(struct kvm_vcpu *vcpu);
+extern void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val);
extern u64 vcpu_thash(struct kvm_vcpu *vcpu, u64 vadr);
extern void vcpu_bsw0(struct kvm_vcpu *vcpu);
extern void thash_vhpt_insert(struct kvm_vcpu *v, u64 pte,
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a42..20b3852 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@
u64 rid;
rid = vcpu_get_rr(vcpu, va);
- rid = rid & RR_RID_MASK;;
+ rid = rid & RR_RID_MASK;
if (type == D_TLB) {
if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@
struct thash_cb *hcb = &v->arch.vtlb;
- cch = __vtr_lookup(v, va, is_data);;
+ cch = __vtr_lookup(v, va, is_data);
if (cch)
return cch;
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f..7de76dd 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@
/*
* PCI BIOS setup, always defaults to SAL interface
*/
-char * __devinit
+char * __init
pcibios_setup (char *str)
{
return str;
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf..25831c4 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@
bricktype = MODULE_GET_BTYPE(moduleid);
if ((bricktype == L1_BRICKTYPE_191010) ||
(bricktype == L1_BRICKTYPE_1932))
- sprintf(address, "%s^%d", address, geo_slot(geoid));
+ sprintf(address + strlen(address), "^%d",
+ geo_slot(geoid));
}
void __devinit
diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
index f11a2b9..0fc7361 100644
--- a/arch/m32r/include/asm/pgalloc.h
+++ b/arch/m32r/include/asm/pgalloc.h
@@ -58,7 +58,7 @@
__free_page(pte);
}
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte))
/*
* allocating and freeing a pmd is trivial: the 1-entry pmd is
@@ -68,7 +68,7 @@
#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
#define check_pgt_cache() do { } while (0)
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d46..07bb5bd 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -57,8 +57,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -68,7 +66,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index bf0abe9..98b8feb 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -19,7 +19,6 @@
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index d08bf62..15ee4c7 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -54,7 +54,8 @@
__free_page(page);
}
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+ unsigned long address)
{
pgtable_page_dtor(page);
cache_page(kmap(page));
@@ -73,7 +74,8 @@
return free_pointer_table(pmd);
}
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long address)
{
return free_pointer_table(pmd);
}
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index d4c83f1..48d80d5 100644
--- a/arch/m68k/include/asm/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -32,7 +32,7 @@
__free_page(page);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
@@ -80,7 +80,7 @@
* inside the pgd, so has no extra memory associated with it.
*/
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr) do { } while (0)
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda4..6ea5c33 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -19,6 +19,7 @@
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f4..c2bde5e 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -49,6 +49,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6e..8f8f4ab 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@
unsigned char *tp;
int i;
- printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
if (current->mm) {
@@ -301,8 +301,7 @@
(int) current->mm->end_data,
(int) current->mm->end_data,
(int) current->mm->brk);
- printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
- KERN_EMERG "\n",
+ printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
(int) current->mm->start_stack,
(int)(((unsigned long) current) + THREAD_SIZE));
}
@@ -313,35 +312,35 @@
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
- printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x TRAPFRAME: %08x\n",
+ printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %08x\n",
(unsigned int) rdusp(), (unsigned int) fp);
- printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+ printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "KERNEL STACK:");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
printk(KERN_EMERG "USER STACK:");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
- printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+ printk(KERN_EMERG "%08x: ", (int) (tp + i));
printk("%08x ", (int) *sp++);
}
- printk("\n" KERN_EMERG "\n");
+ printk(KERN_EMERG "\n");
}
/*
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d3253..3739c8f 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@
if (i % 5)
printk(KERN_CONT " [%08lx] ", addr);
else
- printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+ printk(KERN_EMERG " [%08lx] ", addr);
i++;
#endif
}
@@ -137,8 +137,8 @@
if (stack + 1 + i > endstack)
break;
if (i % 8 == 0)
- printk("\n" KERN_EMERG " ");
- printk(" %08lx", *(stack + i));
+ printk(KERN_EMERG " ");
+ printk(KERN_CONT " %08lx", *(stack + i));
}
printk("\n");
i = 0;
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845..2db722d 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@
config GENERIC_GPIO
def_bool y
+config GENERIC_CSUM
+ def_bool y
+
config PCI
def_bool n
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d0bcf80..8439598 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -6,14 +6,16 @@
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
# Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
# Work out HW multipler support. This is icky.
# 1. Spartan2 has no HW multiplers.
@@ -34,30 +36,29 @@
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-
# r31 holds current when in kernel mode
-CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS :=
LDFLAGS_vmlinux :=
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
-LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
-head-y := arch/microblaze/kernel/head.o
-libs-y += arch/microblaze/lib/ $(LIBGCC)
-core-y += arch/microblaze/kernel/ arch/microblaze/mm/ \
- arch/microblaze/platform/
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
-MMUEXT := -nommu
+MMU := -nommu
endif
-export MMUEXT
+
+export MMU
all: linux.bin
diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612a..6d2e1d4 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_ATOMIC_H
#define _ASM_MICROBLAZE_ATOMIC_H
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i) { (i) }
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#define atomic_inc(v) (atomic_add_return(1, (v)))
-#define atomic_dec(v) (atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v) (atomic_add_return(i, (v)))
-#define atomic_sub(i, v) (atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v) (atomic_add_return(1, (v)))
-#define atomic_dec_return(v) (atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
-
- return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
-
- c = atomic_read(v);
- while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
- c = old;
- return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- *addr &= ~mask;
- local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val += i;
- local_irq_restore(flags);
-
- return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
/*
* Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@
return res;
}
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic-long.h>
-
#endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd..a72468f 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
#include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdd..b12fd89 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
#include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593..61791e1 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
- /* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b..128bf03 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
#ifndef _ASM_MICROBLAZE_CHECKSUM_H
#define _ASM_MICROBLAZE_CHECKSUM_H
-#include <linux/in6.h>
-
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
+#define csum_tcpudp_nofold csum_tcpudp_nofold
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@
return sum;
}
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
- __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum) \
- csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
- u32 sum = (__force u32)csum;
- sum = (sum & 0xffff) + (sum >> 16);
- sum = (sum & 0xffff) + (sum >> 16);
- return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 0000000..3a4988e
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b0..41e1e1a 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,11 @@
#ifndef _ASM_MICROBLAZE_HARDIRQ_H
#define _ASM_MICROBLAZE_HARDIRQ_H
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
/* should be defined in each interrupt controller driver */
extern unsigned int get_irq(struct pt_regs *regs);
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
+#define ack_bad_irq ack_bad_irq
void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 5c17342..7c3ec13 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -14,7 +14,6 @@
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/types.h>
-#include <asm/byteorder.h>
#include <linux/mm.h> /* Get struct page {...} */
diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b2..ec34c76 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN _IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa4..84c7e51 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515de..90f0505 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
#define _ASM_MICROBLAZE_IRQ_H
#define NR_IRQS 32
+#include <asm-generic/irq.h>
#include <linux/interrupt.h>
@@ -17,11 +18,6 @@
#define NO_IRQ (-1)
-static inline int irq_canonicalize(int irq)
-{
- return irq;
-}
-
struct pt_regs;
extern void do_IRQ(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b13..8eebf89 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a..8d6a654 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
#define _ASM_MICROBLAZE_MMU_H
# ifndef CONFIG_MMU
-# ifndef __ASSEMBLY__
-typedef struct {
- struct vm_list_struct *vmlist;
- unsigned long end_brk;
-} mm_context_t;
-# endif /* __ASSEMBLY__ */
+# include <asm-generic/mmu.h>
# else /* CONFIG_MMU */
# ifdef __KERNEL__
# ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed1..24eab16 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
#ifdef CONFIG_MMU
# include "mmu_context_mm.h"
#else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
#endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba55671..0000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm) ({ 0; })
-
-# define enter_lazy_tlb(mm, tsk) do {} while (0)
-# define change_mm_context(old, ctx, _pml4) do {} while (0)
-# define destroy_context(mm) do {} while (0)
-# define deactivate_mm(tsk, mm) do {} while (0)
-# define switch_mm(prev, next, tsk) do {} while (0)
-# define activate_mm(prev, next) do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a..7be1347 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
#ifndef _ASM_MICROBLAZE_MODULE_H
#define _ASM_MICROBLAZE_MODULE_H
+#include <asm-generic/module.h>
+
/* Microblaze Relocations */
#define R_MICROBLAZE_NONE 0
#define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
/* Keep this the last entry. */
#define R_MICROBLAZE_NUM 11
-struct mod_arch_specific {
- int foo;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
typedef struct { volatile int counter; } module_t;
#endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd970..809134c 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a4..965d454 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ /* internal kernel timer frequency */
-#define USER_HZ 100 /* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 0000000..cf252af
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794..9f0df5f 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 59a757e..b0131da 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -180,7 +180,7 @@
__free_page(ptepage);
}
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, (pte))
#define pmd_populate(mm, pmd, pte) (pmd_val(*(pmd)) = page_address(pte))
@@ -193,7 +193,7 @@
*/
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
/*#define pmd_free(mm, x) do { } while (0)*/
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
extern int do_check_pgt_cache(int, int);
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4c57a58..cc3a4df 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -185,6 +185,7 @@
/* Definitions for MicroBlaze. */
#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
@@ -320,8 +321,7 @@
static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-/* FIXME */
-static inline int pte_file(pte_t pte) { return 0; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -488,7 +488,7 @@
/* Encode and decode a nonlinear file mapping entry */
#define PTE_FILE_MAX_BITS 29
#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
-#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) })
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b23..0e15039 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
#define _ASM_MICROBLAZE_POSIX_TYPES_H
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
-typedef unsigned int __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned int __kernel_ipc_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char *__kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
+#define __kernel_mode_t __kernel_mode_t
-typedef unsigned int __kernel_old_uid_t;
-typedef unsigned int __kernel_old_gid_t;
-typedef unsigned int __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 20f7b3a..37e6f30 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -16,6 +16,18 @@
#define _ASM_MICROBLAZE_PROM_H
#ifdef __KERNEL__
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER 0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
+#define OF_DT_END_NODE 0x2 /* End node */
+#define OF_DT_PROP 0x3 /* Property: name off, size, content */
+#define OF_DT_NOP 0x4 /* nop */
+#define OF_DT_END 0x9
+
+#define OF_DT_VERSION 0x10
+
+#ifndef __ASSEMBLY__
+
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
@@ -29,16 +41,6 @@
#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER 0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
-#define OF_DT_END_NODE 0x2 /* End node */
-#define OF_DT_PROP 0x3 /* Property: name off, size, content */
-#define OF_DT_NOP 0x4 /* nop */
-#define OF_DT_END 0x9
-
-#define OF_DT_VERSION 0x10
-
/*
* This is what gets passed to the kernel by prom_init or kexec
*
@@ -309,5 +311,6 @@
*/
#include <linux/of.h>
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d0..35d786f 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- dma_addr_t dma_address;
- unsigned int offset;
- unsigned int length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed7..7673b83 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8c..a0cb0caf 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c58..83c05fc 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b..93f30de 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911..0815d29 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
#include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc226..7b1573c 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- * Yasushi SHOJI <yashi@atmark-techno.com>
- * Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-# ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-# define _NSIG 64
-# define _NSIG_BPW 32
-# define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-
-# include <asm/sigcontext.h>
-# undef __HAVE_ARCH_SIG_BITOPS
-
-# define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-# else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-# define NSIG 32
-typedef unsigned long sigset_t;
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-# define sa_handler _u._sa_handler
-# define sa_sigaction _u._sa_sigaction
-
-# endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 8259368..6b71384 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a..def6d47 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f775..3dc90fa 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned long st_rdev;
- unsigned long __pad1;
- long st_size;
- int st_blksize;
- int __pad2;
- long st_blocks;
- int st_atime;
- unsigned int st_atime_nsec;
- int st_mtime;
- unsigned int st_mtime_nsec;
- int st_ctime;
- unsigned int st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct stat64 {
- unsigned long long st_dev; /* Device. */
- unsigned long long st_ino; /* File serial number. */
- unsigned int st_mode; /* File mode. */
- unsigned int st_nlink; /* Link count. */
- unsigned int st_uid; /* User ID of the file's owner. */
- unsigned int st_gid; /* Group ID of the file's group. */
- unsigned long long st_rdev; /* Device number, if device. */
- unsigned long long __pad1;
- long long st_size; /* Size of file, in bytes. */
- int st_blksize; /* Optimal block size for I/O. */
- int __pad2;
- long long st_blocks; /* Number 512-byte blocks allocated. */
- int st_atime; /* Time of last access. */
- unsigned int st_atime_nsec;
- int st_mtime; /* Time of last modification. */
- unsigned int st_mtime_nsec;
- int st_ctime; /* Time of last status change. */
- unsigned int st_ctime_nsec;
- unsigned int __unused4;
- unsigned int __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b..7847e56 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb..720761c 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,48 +1,8 @@
#ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
- int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
- char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- struct pt_regs *regs);
-
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
- struct pt_regs *regs);
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
#endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e3088..b1ed615 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
#include <asm/setup.h>
#include <asm/irqflags.h>
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
struct task_struct;
struct thread_info;
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc..3935b10 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define BOTHER 0010000
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1..280d78a 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards
- about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14
-#define N_HCI 15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 7fac444..6e92885 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -75,8 +75,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -84,7 +82,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525d..befcf3d 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
#ifndef _ASM_MICROBLAZE_TIMEX_H
#define _ASM_MICROBLAZE_TIMEX_H
+#include <asm-generic/timex.h>
+
#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
-typedef unsigned long cycles_t;
-
-#define get_cycles() (0)
-
#endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index c472d28..e8abd4a 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,7 +11,7 @@
#ifndef _ASM_MICROBLAZE_TLB_H
#define _ASM_MICROBLAZE_TLB_H
-#define tlb_flush(tlb) do {} while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <asm-generic/tlb.h>
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018..b9e79bc 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-# ifdef __KERNEL__
-# define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-# endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 65adad6..5431b46 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -189,7 +189,7 @@
#define __put_user(x, ptr) \
({ \
- __typeof__(*(ptr)) __gu_val = x; \
+ __typeof__(*(ptr)) volatile __gu_val = (x); \
long __gu_err = 0; \
switch (sizeof(__gu_val)) { \
case 1: \
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3..9bc07b9 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5f..0b85232 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
#define __NR_accept04 362 /* new */
#define __NR_preadv 363 /* new */
#define __NR_pwritev 364 /* new */
+#define __NR_rt_tgsigqueueinfo 365 /* new */
+#define __NR_perf_counter_open 366 /* new */
-#define __NR_syscalls 365
+#define __NR_syscalls 367
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
@@ -408,7 +410,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
/*
* "Conditional" syscalls
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b13789..89d82fd 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f4a5e19..d487729 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -17,4 +17,4 @@
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
obj-$(CONFIG_MMU) += misc.o
-obj-y += entry$(MMUEXT).o
+obj-y += entry$(MMU).o
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index 153f57c5..c259786 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -22,7 +22,7 @@
#define CI(c, p) { ci->c = PVR_##p(pvr); }
#define err_printk(x) \
- early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+ early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
{
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 450ca6b..adb448f 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -18,7 +18,7 @@
static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
#define err_printk(x) \
- early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+ early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
{
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index a10bea1..c411c67 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -26,6 +26,8 @@
{"7.10.b", 0x09},
{"7.10.c", 0x0a},
{"7.10.d", 0x0b},
+ {"7.20.a", 0x0c},
+ {"7.20.b", 0x0d},
/* FIXME There is no keycode defined in MBV for these versions */
{"2.10.a", 0x10},
{"3.00.a", 0x20},
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b8..9083d85 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,30 +551,22 @@
rtid r14, 0
nop
-sys_vfork_wrapper:
- brid sys_vfork
+sys_vfork:
+ brid microblaze_vfork
addk r5, r1, r0
-sys_clone_wrapper:
- brid sys_clone
+sys_clone:
+ brid microblaze_clone
addk r7, r1, r0
-sys_execve_wrapper:
- brid sys_execve
+sys_execve:
+ brid microblaze_execve
addk r8, r1, r0
-sys_sigreturn_wrapper:
- brid sys_sigreturn
- addk r5, r1, r0
-
sys_rt_sigreturn_wrapper:
brid sys_rt_sigreturn
addk r5, r1, r0
-sys_sigsuspend_wrapper:
- brid sys_rt_sigsuspend
- addk r6, r1, r0
-
sys_rt_sigsuspend_wrapper:
brid sys_rt_sigsuspend
addk r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b..c7353e7 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@
brid ret_from_trap; /* Do normal trap return */
nop;
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+ brid microblaze_vfork /* Do real work (tail-call) */
la r5, r1, PTO
- brid sys_vfork /* Do real work (tail-call) */
- nop
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */
lwi r6, r1, PTO+PT_R1; /* If so, use paret's stack ptr */
1: la r7, r1, PTO; /* Arg 2: parent context */
@@ -444,20 +443,9 @@
brid do_fork /* Do real work (tail-call) */
nop;
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
la r8, r1, PTO; /* add user context as 4th arg */
- brid sys_execve; /* Do real work (tail-call).*/
- nop;
-
-C_ENTRY(sys_sigsuspend_wrapper):
- swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- swi r4, r1, PTO+PT_R4;
- la r6, r1, PTO; /* add user context as 2nd arg */
- bralid r15, sys_sigsuspend; /* Do real work.*/
- nop;
- lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- lwi r4, r1, PTO+PT_R4;
- bri ret_from_trap /* fall through will not work here due to align */
+ brid microblaze_execve; /* Do real work (tail-call).*/
nop;
C_ENTRY(sys_rt_sigsuspend_wrapper):
@@ -471,18 +459,6 @@
bri ret_from_trap /* fall through will not work here due to align */
nop;
-
-C_ENTRY(sys_sigreturn_wrapper):
- swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- swi r4, r1, PTO+PT_R4;
- la r5, r1, PTO; /* add user context as 1st arg */
- brlid r15, sys_sigreturn; /* Do real work.*/
- nop;
- lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
- lwi r4, r1, PTO+PT_R4;
- bri ret_from_trap /* fall through will not work here due to align */
- nop;
-
C_ENTRY(sys_rt_sigreturn_wrapper):
swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
swi r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index e568d6e..e41c6ce 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,6 +31,7 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/prom.h> /* for OF_DT_HEADER */
#ifdef CONFIG_MMU
#include <asm/setup.h> /* COMMAND_LINE_SIZE */
@@ -54,11 +55,19 @@
andi r1, r1, ~2
mts rmsr, r1
-/* save fdt to kernel location */
-/* r7 stores pointer to fdt blob */
- beqi r7, no_fdt_arg
+/* r7 may point to an FDT, or there may be one linked in.
+ if it's in r7, we've got to save it away ASAP.
+ We ensure r7 points to a valid FDT, just in case the bootloader
+ is broken or non-existent */
+ beqi r7, no_fdt_arg /* NULL pointer? don't copy */
+ lw r11, r0, r7 /* Does r7 point to a */
+ rsubi r11, r11, OF_DT_HEADER /* valid FDT? */
+ beqi r11, _prepare_copy_fdt
+ or r7, r0, r0 /* clear R7 when not valid DTB */
+ bnei r11, no_fdt_arg /* No - get out of here */
+_prepare_copy_fdt:
or r11, r0, r0 /* incremment */
- ori r4, r0, TOPHYS(_fdt_start) /* save bram context */
+ ori r4, r0, TOPHYS(_fdt_start)
ori r3, r0, (0x4000 - 4)
_copy_fdt:
lw r12, r7, r11 /* r12 = r7 + r11 */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 9d591cd..3288c97 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -74,6 +74,7 @@
#include <asm/mmu.h>
#include <asm/pgtable.h>
+#include <asm/signal.h>
#include <asm/asm-offsets.h>
/* Helpful Macros */
@@ -428,19 +429,9 @@
mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
nop
_no_delayslot:
-#endif
-
-#ifdef CONFIG_MMU
- /* Check if unaligned address is last on a 4k page */
- andi r5, r4, 0xffc
- xori r5, r5, 0xffc
- bnei r5, _unaligned_ex2
- _unaligned_ex1:
- RESTORE_STATE;
-/* Another page must be accessed or physical address not in page table */
- bri unaligned_data_trap
-
- _unaligned_ex2:
+ /* jump to high level unaligned handler */
+ RESTORE_STATE;
+ bri unaligned_data_trap
#endif
andi r6, r3, 0x3E0; /* Mask and extract the register operand */
srl r6, r6; /* r6 >> 5 */
@@ -450,45 +441,6 @@
srl r6, r6;
/* Store the register operand in a temporary location */
sbi r6, r0, TOPHYS(ex_reg_op);
-#ifdef CONFIG_MMU
- /* Get physical address */
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- ori r5, r0, CONFIG_KERNEL_START
- cmpu r5, r4, r5
- bgti r5, _unaligned_ex3
- ori r5, r0, swapper_pg_dir
- bri _unaligned_ex4
-
- /* Get the PGD for the current thread. */
-_unaligned_ex3: /* user thread */
- addi r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
- lwi r5, r5, TASK_THREAD + PGDIR
-_unaligned_ex4:
- tophys(r5,r5)
- BSRLI(r6,r4,20) /* Create L1 (pgdir/pmd) address */
- andi r6, r6, 0xffc
-/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
- or r5, r5, r6
- lwi r6, r5, 0 /* Get L1 entry */
- andi r5, r6, 0xfffff000 /* Extract L2 (pte) base address. */
- beqi r5, _unaligned_ex1 /* Bail if no table */
-
- tophys(r5,r5)
- BSRLI(r6,r4,10) /* Compute PTE address */
- andi r6, r6, 0xffc
- andi r5, r5, 0xfffff003
- or r5, r5, r6
- lwi r5, r5, 0 /* Get Linux PTE */
-
- andi r6, r5, _PAGE_PRESENT
- beqi r6, _unaligned_ex1 /* Bail if no page */
-
- andi r5, r5, 0xfffff000 /* Extract RPN */
- andi r4, r4, 0x00000fff /* Extract offset */
- or r4, r4, r5 /* Create physical address */
-#endif /* CONFIG_MMU */
andi r6, r3, 0x400; /* Extract ESR[S] */
bnei r6, ex_sw;
@@ -959,15 +911,15 @@
andi r6, r3, 0x800; /* Extract ESR[W] - delay slot */
ex_lw_vm:
beqid r6, ex_lhw_vm;
- lbui r5, r4, 0; /* Exception address in r4 - delay slot */
+load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */
/* Load a word, byte-by-byte from destination address and save it in tmp space*/
la r6, r0, ex_tmp_data_loc_0;
sbi r5, r6, 0;
- lbui r5, r4, 1;
+load2: lbui r5, r4, 1;
sbi r5, r6, 1;
- lbui r5, r4, 2;
+load3: lbui r5, r4, 2;
sbi r5, r6, 2;
- lbui r5, r4, 3;
+load4: lbui r5, r4, 3;
sbi r5, r6, 3;
brid ex_lw_tail_vm;
/* Get the destination register value into r3 - delay slot */
@@ -977,7 +929,7 @@
* save it in tmp space */
la r6, r0, ex_tmp_data_loc_0;
sbi r5, r6, 0;
- lbui r5, r4, 1;
+load5: lbui r5, r4, 1;
sbi r5, r6, 1;
lhui r3, r6, 0; /* Get the destination register value into r3 */
ex_lw_tail_vm:
@@ -996,22 +948,53 @@
swi r3, r5, 0; /* Get the word - delay slot */
/* Store the word, byte-by-byte into destination address */
lbui r3, r5, 0;
- sbi r3, r4, 0;
+store1: sbi r3, r4, 0;
lbui r3, r5, 1;
- sbi r3, r4, 1;
+store2: sbi r3, r4, 1;
lbui r3, r5, 2;
- sbi r3, r4, 2;
+store3: sbi r3, r4, 2;
lbui r3, r5, 3;
brid ret_from_exc;
- sbi r3, r4, 3; /* Delay slot */
+store4: sbi r3, r4, 3; /* Delay slot */
ex_shw_vm:
/* Store the lower half-word, byte-by-byte into destination address */
lbui r3, r5, 2;
- sbi r3, r4, 0;
+store5: sbi r3, r4, 0;
lbui r3, r5, 3;
brid ret_from_exc;
- sbi r3, r4, 1; /* Delay slot */
+store6: sbi r3, r4, 1; /* Delay slot */
ex_sw_end_vm: /* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+ ori r5, r7, 0 /* setup pointer to pt_regs */
+ lwi r6, r7, PT_PC; /* faulting address is one instruction above */
+ addik r6, r6, -4 /* for finding proper fixup */
+ swi r6, r7, PT_PC; /* a save back it to PT_PC */
+ addik r7, r0, SIGSEGV
+ /* call bad_page_fault for finding aligned fixup, fixup address is saved
+ * in PT_PC which is used as return address from exception */
+ la r15, r0, ret_from_exc-8 /* setup return address */
+ brid bad_page_fault
+ nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+ .word load1,ex_unaligned_fixup;
+ .word load2,ex_unaligned_fixup;
+ .word load3,ex_unaligned_fixup;
+ .word load4,ex_unaligned_fixup;
+ .word load5,ex_unaligned_fixup;
+ .word store1,ex_unaligned_fixup;
+ .word store2,ex_unaligned_fixup;
+ .word store3,ex_unaligned_fixup;
+ .word store4,ex_unaligned_fixup;
+ .word store5,ex_unaligned_fixup;
+ .word store6,ex_unaligned_fixup;
+.previous;
.end _unaligned_data_exception
#endif /* CONFIG_MMU */
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 5141417..5a45b1a 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -57,7 +57,6 @@
Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
Elf32_Sym *sym;
unsigned long int *location;
- unsigned long int locoffs;
unsigned long int value;
#if __GNUC__ < 4
unsigned long int old_value;
@@ -113,10 +112,12 @@
break;
case R_MICROBLAZE_64_PCREL:
- locoffs = (location[0] & 0xFFFF) << 16 |
+#if __GNUC__ < 4
+ old_value = (location[0] & 0xFFFF) << 16 |
(location[1] & 0xFFFF);
- value -= (unsigned long int)(location) + 4 +
- locoffs;
+ value -= old_value;
+#endif
+ value -= (unsigned long int)(location) + 4;
location[0] = (location[0] & 0xFFFF0000) |
(value >> 16);
location[1] = (location[1] & 0xFFFF0000) |
@@ -125,6 +126,14 @@
value);
break;
+ case R_MICROBLAZE_32_PCREL_LO:
+ pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+ break;
+
+ case R_MICROBLAZE_64_NONE:
+ pr_debug("R_MICROBLAZE_NONE\n");
+ break;
+
case R_MICROBLAZE_NONE:
pr_debug("R_MICROBLAZE_NONE\n");
break;
@@ -133,7 +142,7 @@
printk(KERN_ERR "module %s: "
"Unknown relocation: %u\n",
module->name,
- ELF32_R_TYPE(rela->r_info));
+ ELF32_R_TYPE(rela[i].r_info));
return -ENOEXEC;
}
}
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index b86aa62..53ff39a 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -27,7 +27,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8709bea..2a97bf5 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -138,8 +138,12 @@
setup_early_printk(NULL);
#endif
- early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
- printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+ early_printk("Ramdisk addr 0x%08x, ", ram);
+ if (fdt)
+ early_printk("FDT at 0x%08x\n", fdt);
+ else
+ early_printk("Compiled-in FDT at 0x%08x\n",
+ (unsigned int)_fdt_start);
#ifdef CONFIG_MTD_UCLINUX
early_printk("Found romfs @ 0x%08x (0x%08x)\n",
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e652..1c80e4f 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -21,7 +21,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
@@ -45,91 +44,8 @@
asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
- sigset_t saveset;
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r3 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset, 1))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r3 = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset, 1))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
- struct old_sigaction *oact)
-{
- struct k_sigaction new_ka, old_ka;
- int ret;
-
- if (act) {
- old_sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
- return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
- return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-asmlinkage int
+asmlinkage long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
{
@@ -139,7 +55,6 @@
/*
* Do a signal return; undo the signal stack.
*/
-
struct sigframe {
struct sigcontext sc;
unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +91,7 @@
return err;
}
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
- struct sigframe *frame =
- (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
- sigset_t set;
- int rval;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
-
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->sc, &rval))
- goto badframe;
- return rval;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +206,17 @@
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
/* minus 8 is offset to cater for "rtsd r15,8" */
- if (ka->sa.sa_flags & SA_RESTORER) {
- regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
- } else {
- /* addi r12, r0, __NR_sigreturn */
- err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
- frame->tramp + 0);
- /* brki r14, 0x8 */
- err |= __put_user(0xb9cc0008, frame->tramp + 1);
+ /* addi r12, r0, __NR_sigreturn */
+ err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+ frame->tramp + 0);
+ /* brki r14, 0x8 */
+ err |= __put_user(0xb9cc0008, frame->tramp + 1);
- /* Return from sighandler will jump to the tramp.
- Negative 8 offset because return is rtsd r15, 8 */
- regs->r15 = ((unsigned long)frame->tramp)-8;
+ /* Return from sighandler will jump to the tramp.
+ Negative 8 offset because return is rtsd r15, 8 */
+ regs->r15 = ((unsigned long)frame->tramp)-8;
- __invalidate_cache_sigtramp((unsigned long)frame->tramp);
- }
+ __invalidate_cache_sigtramp((unsigned long)frame->tramp);
if (err)
goto give_sigsegv;
@@ -405,7 +283,7 @@
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
{
@@ -426,6 +304,7 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
}
+ return 1;
}
/*
@@ -456,7 +335,9 @@
if (kernel_mode(regs))
return 1;
- if (!oldset)
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +345,31 @@
/* Whee! Actually deliver the signal. */
if (in_syscall)
handle_restart(regs, &ka, 1);
- handle_signal(signr, &ka, &info, oldset, regs);
+ if (handle_signal(signr, &ka, &info, oldset, regs)) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &=
+ ~TS_RESTORE_SIGMASK;
+ }
return 1;
}
if (in_syscall)
handle_restart(regs, NULL, 0);
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+
/* Did we come from a system call? */
return 0;
}
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff..b96f168 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/sem.h>
#include <linux/msg.h>
@@ -34,120 +33,21 @@
#include <linux/unistd.h>
#include <asm/syscalls.h>
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. This will be remove with new toolchain.
- */
-asmlinkage int
-sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
-{
- int version, ret;
- version = call >> 16; /* hack for backward compatibility */
- call &= 0xffff;
-
- ret = -EINVAL;
- switch (call) {
- case SEMOP:
- ret = sys_semop(first, (struct sembuf *)ptr, second);
- break;
- case SEMGET:
- ret = sys_semget(first, second, third);
- break;
- case SEMCTL:
- {
- union semun fourth;
-
- if (!ptr)
- break;
- ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
- || (get_user(fourth.__pad, (void **)ptr)) ;
- if (ret)
- break;
- ret = sys_semctl(first, second, third, fourth);
- break;
- }
- case MSGSND:
- ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
- break;
- case MSGRCV:
- switch (version) {
- case 0: {
- struct ipc_kludge tmp;
-
- if (!ptr)
- break;
- ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
- ? 0 : -EFAULT) || copy_from_user(&tmp,
- (struct ipc_kludge *) ptr, sizeof(tmp));
- if (ret)
- break;
- ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
- third);
- break;
- }
- default:
- ret = sys_msgrcv(first, (struct msgbuf *) ptr,
- second, fifth, third);
- break;
- }
- break;
- case MSGGET:
- ret = sys_msgget((key_t) first, second);
- break;
- case MSGCTL:
- ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
- break;
- case SHMAT:
- switch (version) {
- default: {
- ulong raddr;
- ret = access_ok(VERIFY_WRITE, (ulong *) third,
- sizeof(ulong)) ? 0 : -EFAULT;
- if (ret)
- break;
- ret = do_shmat(first, (char *) ptr, second, &raddr);
- if (ret)
- break;
- ret = put_user(raddr, (ulong *) third);
- break;
- }
- case 1: /* iBCS2 emulator entry point */
- if (!segment_eq(get_fs(), get_ds()))
- break;
- ret = do_shmat(first, (char *) ptr, second,
- (ulong *) third);
- break;
- }
- break;
- case SHMDT:
- ret = sys_shmdt((char *)ptr);
- break;
- case SHMGET:
- ret = sys_shmget(first, second, third);
- break;
- case SHMCTL:
- ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
- break;
- }
- return ret;
-}
-
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
regs, 0, NULL, NULL);
}
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
{
if (!stack)
stack = regs->r1;
return do_fork(flags, stack, regs, 0, NULL, NULL);
}
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
char __user *__user *envp, struct pt_regs *regs)
{
int error;
@@ -163,8 +63,8 @@
return error;
}
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
@@ -189,18 +89,18 @@
return ret;
}
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
- unsigned long fd, off_t offset)
+ unsigned long fd, off_t pgoff)
{
int err = -EINVAL;
- if (offset & ~PAGE_MASK) {
+ if (pgoff & ~PAGE_MASK) {
printk(KERN_INFO "no pagemask in mmap\r\n");
goto out;
}
- err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+ err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
out:
return err;
}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d178..216db81 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@
.long sys_creat
.long sys_link
.long sys_unlink /* 10 */
- .long sys_execve_wrapper
+ .long sys_execve
.long sys_chdir
.long sys_time
.long sys_mknod
@@ -71,12 +71,12 @@
.long sys_getppid
.long sys_getpgrp /* 65 */
.long sys_setsid
- .long sys_sigaction
+ .long sys_ni_syscall /* sys_sigaction */
.long sys_sgetmask
.long sys_ssetmask
.long sys_setreuid /* 70 */
.long sys_setregid
- .long sys_sigsuspend_wrapper
+ .long sys_ni_syscall /* sys_sigsuspend_wrapper */
.long sys_sigpending
.long sys_sethostname
.long sys_setrlimit /* 75 */
@@ -121,10 +121,10 @@
.long sys_wait4
.long sys_swapoff /* 115 */
.long sys_sysinfo
- .long sys_ipc
+ .long sys_ni_syscall /* old sys_ipc */
.long sys_fsync
- .long sys_sigreturn_wrapper
- .long sys_clone_wrapper /* 120 */
+ .long sys_ni_syscall /* sys_sigreturn_wrapper */
+ .long sys_clone /* 120 */
.long sys_setdomainname
.long sys_newuname
.long sys_ni_syscall /* modify_ldt */
@@ -194,7 +194,7 @@
.long sys_sendfile
.long sys_ni_syscall /* reserved for streams1 */
.long sys_ni_syscall /* reserved for streams2 */
- .long sys_vfork_wrapper /* 190 */
+ .long sys_vfork /* 190 */
.long sys_getrlimit
.long sys_mmap2 /* mmap2 */
.long sys_truncate64
@@ -369,3 +369,5 @@
.long sys_ni_syscall
.long sys_ni_syscall
.long sys_ni_syscall
+ .long sys_rt_tgsigqueueinfo /* 365 */
+ .long sys_perf_counter_open
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6..b579db0 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile
#
-lib-y := memset.o checksum.o
+lib-y := memset.o
ifeq ($(CONFIG_OPT_LIB_ASM),y)
lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e745..0000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc
- * choose these registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
- /* add up 16-bit and 16-bit for 16+c bit */
- x = (x & 0xffff) + (x >> 16);
- /* add up carry.. */
- x = (x & 0xffff) + (x >> 16);
- return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
- int odd, count;
- unsigned long result = 0;
-
- if (len <= 0)
- goto out;
- odd = 1 & (unsigned long) buff;
- if (odd) {
- result = *buff;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *) buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long carry = 0;
- do {
- unsigned long w = *(unsigned long *) buff;
- count--;
- buff += 4;
- result += carry;
- result += w;
- carry = (w > result);
- } while (count);
- result += carry;
- result = (result & 0xffff) + (result >> 16);
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += (*buff << 8);
- result = from32to16(result);
- if (odd)
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
- return result;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
- unsigned int sum = (__force unsigned int)wsum;
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += sum;
- if (sum > result)
- result += 1;
- return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
- __wsum sum, int *csum_err)
-{
- int missing;
-
- missing = __copy_from_user(dst, src, len);
- if (missing) {
- memset(dst + len - missing, 0, missing);
- *csum_err = -EFAULT;
- } else
- *csum_err = 0;
-
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 956607a..d9d249a 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -69,7 +69,7 @@
* It is called from do_page_fault above and from some of the procedures
* in traps.c.
*/
-static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
{
const struct exception_table_entry *fixup;
/* MS: no context */
@@ -122,15 +122,10 @@
}
#endif /* CONFIG_KGDB */
- if (in_atomic() || mm == NULL) {
- /* FIXME */
- if (kernel_mode(regs)) {
- printk(KERN_EMERG
- "Page fault in kernel mode - Oooou!!! pid %d\n",
- current->pid);
- _exception(SIGSEGV, regs, code, address);
- return;
- }
+ if (in_atomic() || !mm) {
+ if (kernel_mode(regs))
+ goto bad_area_nosemaphore;
+
/* in_atomic() in user mode is really bad,
as is current->mm == NULL. */
printk(KERN_EMERG "Page fault in user mode with "
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701c..8d92c4e 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@
memory_size = memory_end - memory_start;
PAGE_OFFSET = memory_start;
printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
- "size 0x%08x\n", __func__, memory_start,
- memory_end, memory_size);
+ "size 0x%08x\n", __func__, (u32) memory_start,
+ (u32) memory_end, (u32) memory_size);
break;
}
}
if (!memory_start || !memory_end) {
panic("%s: Missing memory setting 0x%08x-0x%08x\n",
- __func__, memory_start, memory_end);
+ __func__, (u32) memory_start, (u32) memory_end);
}
/* reservation of region where is the kernel */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f..3ca0fe1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+config AR7
+ bool "Texas Instruments AR7"
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select NO_EXCEPT_FILL
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_GPIO
+ select GCD
+ select VLYNQ
+ help
+ Support for the Texas Instruments AR7 System-on-a-Chip
+ family: TNETD7100, 7200 and 7300.
+
config BASLER_EXCITE
bool "Basler eXcite smart camera"
select CEVT_R4K
@@ -209,7 +229,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken
+ select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
help
@@ -247,6 +267,7 @@
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
+ select ARCH_REQUIRE_GPIOLIB
config NXP_STB220
bool "NXP STB220 board"
@@ -1635,7 +1656,7 @@
config MIPS_CMP
bool "MIPS CMP framework support"
depends on SYS_SUPPORTS_MIPS_CMP
- select SYNC_R4K if BROKEN
+ select SYNC_R4K
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_SCHED_SMT if SMP
select WEAK_ORDERING
@@ -2147,11 +2168,11 @@
config ARCH_HIBERNATION_POSSIBLE
def_bool y
- depends on SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
source "kernel/power/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a..861da51 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -173,6 +173,13 @@
#
#
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7) += arch/mips/ar7/
+cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7) += 0xffffffff94100000
+
+#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 8b5914d..e30e42a 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -1,7 +1,7 @@
/*
* MTX-1 platform devices registration
*
- * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -142,7 +142,17 @@
static int __init mtx1_register_devices(void)
{
- gpio_direction_input(207);
+ int rc;
+
+ rc = gpio_request(mtx1_gpio_button[0].gpio,
+ mtx1_gpio_button[0].desc);
+ if (rc < 0) {
+ printk(KERN_INFO "mtx1: failed to request %d\n",
+ mtx1_gpio_button[0].gpio);
+ goto out;
+ }
+ gpio_direction_input(mtx1_gpio_button[0].gpio);
+out:
return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
}
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 0000000..26bc5da
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,11 @@
+
+obj-y := \
+ prom.o \
+ setup.o \
+ memory.o \
+ irq.o \
+ time.o \
+ platform.o \
+ gpio.o \
+ clock.o
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 0000000..cc65c8e
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK 0x3
+#define CPU_PLL_SOURCE_SHIFT 16
+#define BUS_PLL_SOURCE_SHIFT 14
+#define USB_PLL_SOURCE_SHIFT 18
+#define DSP_PLL_SOURCE_SHIFT 22
+#define BOOT_PLL_SOURCE_AFE 0
+#define BOOT_PLL_SOURCE_BUS 0
+#define BOOT_PLL_SOURCE_REF 1
+#define BOOT_PLL_SOURCE_XTAL 2
+#define BOOT_PLL_SOURCE_CPU 3
+#define BOOT_PLL_BYPASS 0x00000020
+#define BOOT_PLL_ASYNC_MODE 0x02000000
+#define BOOT_PLL_2TO1_MODE 0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU 0
+#define TNETD7200_CLOCK_ID_DSP 1
+#define TNETD7200_CLOCK_ID_USB 2
+
+#define TNETD7200_DEF_CPU_CLK 211000000
+#define TNETD7200_DEF_DSP_CLK 125000000
+#define TNETD7200_DEF_USB_CLK 48000000
+
+struct tnetd7300_clock {
+ u32 ctrl;
+#define PREDIV_MASK 0x001f0000
+#define PREDIV_SHIFT 16
+#define POSTDIV_MASK 0x0000001f
+ u32 unused1[3];
+ u32 pll;
+#define MUL_MASK 0x0000f000
+#define MUL_SHIFT 12
+#define PLL_MODE_MASK 0x00000001
+#define PLL_NDIV 0x00000800
+#define PLL_DIV 0x00000002
+#define PLL_STATUS 0x00000001
+ u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+ struct tnetd7300_clock bus;
+ struct tnetd7300_clock cpu;
+ struct tnetd7300_clock usb;
+ struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+ u32 ctrl;
+ u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+ u32 mul;
+ u32 prediv;
+ u32 postdiv;
+ u32 postdiv2;
+ u32 unused2[6];
+ u32 cmd;
+ u32 status;
+ u32 cmden;
+ u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+ struct tnetd7200_clock cpu;
+ struct tnetd7200_clock dsp;
+ struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+ int *postdiv, int *mul)
+{
+ int i, j, k, freq, res = target;
+ for (i = 1; i <= 16; i++)
+ for (j = 1; j <= 32; j++)
+ for (k = 1; k <= 32; k++) {
+ freq = abs(base / j * i / k - target);
+ if (freq < res) {
+ res = freq;
+ *mul = i;
+ *prediv = j;
+ *postdiv = k;
+ }
+ }
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+ int *mul)
+{
+ int tmp_gcd, tmp_base, tmp_freq;
+
+ for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+ tmp_base = base / *prediv;
+ tmp_gcd = gcd(target, tmp_base);
+ *mul = target / tmp_gcd;
+ *postdiv = tmp_base / tmp_gcd;
+ if ((*mul < 1) || (*mul >= 16))
+ continue;
+ if ((*postdiv > 0) & (*postdiv <= 32))
+ break;
+ }
+
+ if (base / *prediv * *mul / *postdiv != target) {
+ approximate(base, target, prediv, postdiv, mul);
+ tmp_freq = base / *prediv * *mul / *postdiv;
+ printk(KERN_WARNING
+ "Adjusted requested frequency %d to %d\n",
+ target, tmp_freq);
+ }
+
+ printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+ *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+ u32 didr1, didr2;
+ u8 rev = ar7_chip_rev();
+ didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+ didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+ if (didr2 & (1 << 23))
+ return 0;
+ if ((rev >= 0x23) && (rev != 0x57))
+ return 250000000;
+ if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+ > 4208000)
+ return 250000000;
+ return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+ u32 *bootcr, u32 bus_clock)
+{
+ int product;
+ int base_clock = AR7_REF_CLOCK;
+ u32 ctrl = readl(&clock->ctrl);
+ u32 pll = readl(&clock->pll);
+ int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+ int postdiv = (ctrl & POSTDIV_MASK) + 1;
+ int divisor = prediv * postdiv;
+ int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+ case BOOT_PLL_SOURCE_BUS:
+ base_clock = bus_clock;
+ break;
+ case BOOT_PLL_SOURCE_REF:
+ base_clock = AR7_REF_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_XTAL:
+ base_clock = AR7_XTAL_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_CPU:
+ base_clock = ar7_cpu_clock;
+ break;
+ }
+
+ if (*bootcr & BOOT_PLL_BYPASS)
+ return base_clock / divisor;
+
+ if ((pll & PLL_MODE_MASK) == 0)
+ return (base_clock >> (mul / 16 + 1)) / divisor;
+
+ if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+ product = (mul & 1) ?
+ (base_clock * mul) >> 1 :
+ (base_clock * (mul - 1)) >> 2;
+ return product / divisor;
+ }
+
+ if (mul == 16)
+ return base_clock / divisor;
+
+ return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+ u32 *bootcr, u32 frequency)
+{
+ int prediv, postdiv, mul;
+ int base_clock = ar7_bus_clock;
+
+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+ case BOOT_PLL_SOURCE_BUS:
+ base_clock = ar7_bus_clock;
+ break;
+ case BOOT_PLL_SOURCE_REF:
+ base_clock = AR7_REF_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_XTAL:
+ base_clock = AR7_XTAL_CLOCK;
+ break;
+ case BOOT_PLL_SOURCE_CPU:
+ base_clock = ar7_cpu_clock;
+ break;
+ }
+
+ calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+ writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+ msleep(1);
+ writel(4, &clock->pll);
+ while (readl(&clock->pll) & PLL_STATUS)
+ ;
+ writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+ msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7300_clocks *clocks =
+ ioremap_nocache(UR8_REGS_CLOCKS,
+ sizeof(struct tnetd7300_clocks));
+
+ ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+ &clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE)
+ ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+ &clocks->cpu, bootcr, AR7_AFE_CLOCK);
+ else
+ ar7_cpu_clock = ar7_bus_clock;
+
+ if (ar7_dsp_clock == 250000000)
+ tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+ bootcr, ar7_dsp_clock);
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+ int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+ printk(KERN_INFO
+ "Clocks: base = %d, frequency = %u, prediv = %d, "
+ "postdiv = %d, postdiv2 = %d, mul = %d\n",
+ base, frequency, prediv, postdiv, postdiv2, mul);
+
+ writel(0, &clock->ctrl);
+ writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+ writel((mul - 1) & 0xF, &clock->mul);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+ writel(readl(&clock->cmden) | 1, &clock->cmden);
+ writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+ writel(readl(&clock->cmden) | 1, &clock->cmden);
+ writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+ while (readl(&clock->status) & 0x1)
+ ; /* nop */
+
+ writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+ if (*bootcr & BOOT_PLL_ASYNC_MODE)
+ /* Async */
+ switch (clock_id) {
+ case TNETD7200_CLOCK_ID_DSP:
+ return AR7_REF_CLOCK;
+ default:
+ return AR7_AFE_CLOCK;
+ }
+ else
+ /* Sync */
+ if (*bootcr & BOOT_PLL_2TO1_MODE)
+ /* 2:1 */
+ switch (clock_id) {
+ case TNETD7200_CLOCK_ID_DSP:
+ return AR7_REF_CLOCK;
+ default:
+ return AR7_AFE_CLOCK;
+ }
+ else
+ /* 1:1 */
+ return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ struct tnetd7200_clocks *clocks =
+ ioremap_nocache(AR7_REGS_CLOCKS,
+ sizeof(struct tnetd7200_clocks));
+ int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+ int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+ int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+ cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+ dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+ if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+ printk(KERN_INFO "Clocks: Async mode\n");
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+ &dsp_prediv, &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock =
+ ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+ ar7_bus_clock);
+
+ printk(KERN_INFO "Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+ &cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock =
+ ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ } else
+ if (*bootcr & BOOT_PLL_2TO1_MODE) {
+ printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+ printk(KERN_INFO "Clocks: Setting CPU clock\n");
+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+ &cpu_postdiv, &cpu_mul);
+ ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+ / cpu_postdiv;
+ tnetd7200_set_clock(cpu_base, &clocks->cpu,
+ cpu_prediv, cpu_postdiv, -1, cpu_mul,
+ ar7_cpu_clock);
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+ &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ar7_cpu_clock / 2;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+ dsp_mul * 2, ar7_bus_clock);
+ } else {
+ printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+ printk(KERN_INFO "Clocks: Setting DSP clock\n");
+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+ &dsp_postdiv, &dsp_mul);
+ ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+ / dsp_postdiv;
+ tnetd7200_set_clock(dsp_base, &clocks->dsp,
+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+ dsp_mul * 2, ar7_bus_clock);
+
+ ar7_cpu_clock = ar7_bus_clock;
+ }
+
+ printk(KERN_INFO "Clocks: Setting USB clock\n");
+ usb_base = ar7_bus_clock;
+ calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+ &usb_postdiv, &usb_mul);
+ tnetd7200_set_clock(usb_base, &clocks->usb,
+ usb_prediv, usb_postdiv, -1, usb_mul,
+ TNETD7200_DEF_USB_CLK);
+
+ ar7_dsp_clock = ar7_cpu_clock;
+
+ iounmap(clocks);
+ iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+ switch (ar7_chip_id()) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ tnetd7200_init_clocks();
+ break;
+ case AR7_CHIP_7300:
+ ar7_dsp_clock = tnetd7300_dsp_clock();
+ tnetd7300_init_clocks();
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 0000000..74e14a3
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ if (ar7_gpio_list[gpio])
+ return -EBUSY;
+
+ if (label)
+ ar7_gpio_list[gpio] = label;
+ else
+ ar7_gpio_list[gpio] = "busy";
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+ BUG_ON(!ar7_gpio_list[gpio]);
+ ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 0000000..c781556
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET 0x80
+#define PACE_OFFSET 0xA0
+#define CHNLS_OFFSET 0x200
+
+#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */
+#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */
+#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */
+#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */
+#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */
+#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */
+#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */
+#define PIR_OFFSET (0x40)
+#define MSR_OFFSET (0x44)
+#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */
+#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+ writel(1 << ((irq - ar7_irq_base) % 32),
+ REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+ .name = "AR7",
+ .unmask = ar7_unmask_irq,
+ .mask = ar7_mask_irq,
+ .ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+ .name = "AR7",
+ .unmask = ar7_unmask_sec_irq,
+ .mask = ar7_mask_sec_irq,
+ .ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+ .handler = no_action,
+ .name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+ int i;
+ /*
+ * Disable interrupts and clear pending
+ */
+ writel(0xffffffff, REG(ECR_OFFSET(0)));
+ writel(0xff, REG(ECR_OFFSET(32)));
+ writel(0xffffffff, REG(SEC_ECR_OFFSET));
+ writel(0xffffffff, REG(CR_OFFSET(0)));
+ writel(0xff, REG(CR_OFFSET(32)));
+ writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+ ar7_irq_base = base;
+
+ for (i = 0; i < 40; i++) {
+ writel(i, REG(CHNL_OFFSET(i)));
+ /* Primary IRQ's */
+ set_irq_chip_and_handler(base + i, &ar7_irq_type,
+ handle_level_irq);
+ /* Secondary IRQ's */
+ if (i < 32)
+ set_irq_chip_and_handler(base + i + 40,
+ &ar7_sec_irq_type,
+ handle_level_irq);
+ }
+
+ setup_irq(2, &ar7_cascade_action);
+ setup_irq(ar7_irq_base, &ar7_cascade_action);
+ set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+ u32 status;
+ int i, irq;
+
+ /* Primary IRQ's */
+ irq = readl(REG(PIR_OFFSET)) & 0x3f;
+ if (irq) {
+ do_IRQ(ar7_irq_base + irq);
+ return;
+ }
+
+ /* Secondary IRQ's are cascaded through primary '0' */
+ writel(1, REG(CR_OFFSET(irq)));
+ status = readl(REG(SEC_SR_OFFSET));
+ for (i = 0; i < 32; i++) {
+ if (status & 1) {
+ do_IRQ(ar7_irq_base + i + 40);
+ return;
+ }
+ status >>= 1;
+ }
+
+ spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+ if (pending & STATUSF_IP7) /* cpu timer */
+ do_IRQ(7);
+ else if (pending & STATUSF_IP2) /* int0 hardware line */
+ ar7_cascade();
+ else
+ spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 0000000..696c723
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+ u32 size = (64 << 20);
+ u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+ u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+ u32 *tmpaddr = addr;
+
+ while (tmpaddr > kernel_end) {
+ *tmpaddr = (u32)tmpaddr;
+ size >>= 1;
+ tmpaddr -= size >> 2;
+ }
+
+ do {
+ tmpaddr += size >> 2;
+ if (*tmpaddr != (u32)tmpaddr)
+ break;
+ size <<= 1;
+ } while (size < (64 << 20));
+
+ writel((u32)tmpaddr, &addr);
+
+ return size;
+}
+
+void __init prom_meminit(void)
+{
+ unsigned long pages;
+
+ pages = memsize() >> PAGE_SHIFT;
+ add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+ BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 0000000..2ecab61
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+ struct plat_vlynq_ops ops;
+ int gpio_bit;
+ int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+ int result;
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+ result = gpio_request(pdata->gpio_bit, "vlynq");
+ if (result)
+ goto out;
+
+ ar7_device_reset(pdata->reset_bit);
+
+ result = ar7_gpio_disable(pdata->gpio_bit);
+ if (result)
+ goto out_enabled;
+
+ result = ar7_gpio_enable(pdata->gpio_bit);
+ if (result)
+ goto out_enabled;
+
+ result = gpio_direction_output(pdata->gpio_bit, 0);
+ if (result)
+ goto out_gpio_enabled;
+
+ msleep(50);
+
+ gpio_set_value(pdata->gpio_bit, 1);
+ msleep(50);
+
+ return 0;
+
+out_gpio_enabled:
+ ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+ ar7_device_disable(pdata->reset_bit);
+ gpio_free(pdata->gpio_bit);
+out:
+ return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+ struct plat_vlynq_data *pdata = dev->dev.platform_data;
+ ar7_gpio_disable(pdata->gpio_bit);
+ gpio_free(pdata->gpio_bit);
+ ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x10000000,
+ .end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC0,
+ .end = AR7_REGS_MAC0 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 27,
+ .end = 27,
+ },
+};
+
+static struct resource cpmac_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC1,
+ .end = AR7_REGS_MAC1 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 41,
+ .end = 41,
+ },
+};
+
+static struct resource vlynq_low_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ0,
+ .end = AR7_REGS_VLYNQ0 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 29,
+ .end = 29,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x04000000,
+ .end = 0x04ffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 80,
+ .end = 111,
+ },
+};
+
+static struct resource vlynq_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ1,
+ .end = AR7_REGS_VLYNQ1 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 33,
+ .end = 33,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 112,
+ .end = 143,
+ },
+};
+
+static struct resource usb_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_USB,
+ .end = AR7_REGS_USB + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 32,
+ .end = 32,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x03400000,
+ .end = 0x034001fff,
+ },
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+ .width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+ .reset_bit = 17,
+ .power_bit = 20,
+ .phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+ .reset_bit = 21,
+ .power_bit = 22,
+ .phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 20,
+ .gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 16,
+ .gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+ .id = 0,
+ .name = "physmap-flash",
+ .dev.platform_data = &physmap_flash_data,
+ .resource = &physmap_flash_resource,
+ .num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device cpmac_low = {
+ .id = 0,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &cpmac_low_data,
+ },
+ .resource = cpmac_low_res,
+ .num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+ .id = 1,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &cpmac_high_data,
+ },
+ .resource = cpmac_high_res,
+ .num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+ .id = 0,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_low_data,
+ .resource = vlynq_low_res,
+ .num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+ .id = 1,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_high_data,
+ .resource = vlynq_high_res,
+ .num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+ {
+ .name = "status",
+ .gpio = 8,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dsl502t_leds[] = {
+ {
+ .name = "status",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "ethernet",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "usb",
+ .gpio = 12,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led dg834g_leds[] = {
+ {
+ .name = "ppp",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "status",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "adsl",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "wifi",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "power",
+ .gpio = 14,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led fb_sl_leds[] = {
+ {
+ .name = "1",
+ .gpio = 7,
+ },
+ {
+ .name = "2",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "3",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "4",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "5",
+ .gpio = 9,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led fb_fon_leds[] = {
+ {
+ .name = "1",
+ .gpio = 8,
+ },
+ {
+ .name = "2",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "3",
+ .gpio = 5,
+ },
+ {
+ .name = "4",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "5",
+ .gpio = 11,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ar7_led_data,
+ }
+};
+
+static struct platform_device ar7_udc = {
+ .id = -1,
+ .name = "ar7_udc",
+ .resource = usb_res,
+ .num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+ switch (h) {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ return h - '0';
+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+ return h - 'A' + 10;
+ case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+ return h - 'a' + 10;
+ default:
+ return 0;
+ }
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+ int i;
+ char name[5], default_mac[ETH_ALEN], *mac;
+
+ mac = NULL;
+ sprintf(name, "mac%c", 'a' + instance);
+ mac = prom_getenv(name);
+ if (!mac) {
+ sprintf(name, "mac%c", 'a');
+ mac = prom_getenv(name);
+ }
+ if (!mac) {
+ random_ether_addr(default_mac);
+ mac = default_mac;
+ }
+ for (i = 0; i < 6; i++)
+ dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+ char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+ char *prid, *usb_prod;
+
+ /* Default LEDs */
+ ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+ ar7_led_data.leds = default_leds;
+
+ /* FIXME: the whole thing is unreliable */
+ prid = prom_getenv("ProductID");
+ usb_prod = prom_getenv("usb_prod");
+
+ /* If we can't get the product id from PROM, use the default LEDs */
+ if (!prid)
+ return;
+
+ if (strstr(prid, "Fritz_Box_FON")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+ ar7_led_data.leds = fb_fon_leds;
+ } else if (strstr(prid, "Fritz_Box_")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+ ar7_led_data.leds = fb_sl_leds;
+ } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+ && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+ ar7_led_data.leds = dsl502t_leds;
+ } else if (strstr(prid, "DG834")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+ ar7_led_data.leds = dg834g_leds;
+ }
+}
+
+static int __init ar7_register_devices(void)
+{
+ int res;
+#ifdef CONFIG_SERIAL_8250
+ static struct uart_port uart_port[2];
+
+ memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+ uart_port[0].type = PORT_16550A;
+ uart_port[0].line = 0;
+ uart_port[0].irq = AR7_IRQ_UART0;
+ uart_port[0].uartclk = ar7_bus_freq() / 2;
+ uart_port[0].iotype = UPIO_MEM32;
+ uart_port[0].mapbase = AR7_REGS_UART0;
+ uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+ uart_port[0].regshift = 2;
+ res = early_serial_setup(&uart_port[0]);
+ if (res)
+ return res;
+
+
+ /* Only TNETD73xx have a second serial port */
+ if (ar7_has_second_uart()) {
+ uart_port[1].type = PORT_16550A;
+ uart_port[1].line = 1;
+ uart_port[1].irq = AR7_IRQ_UART1;
+ uart_port[1].uartclk = ar7_bus_freq() / 2;
+ uart_port[1].iotype = UPIO_MEM32;
+ uart_port[1].mapbase = UR8_REGS_UART1;
+ uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+ uart_port[1].regshift = 2;
+ res = early_serial_setup(&uart_port[1]);
+ if (res)
+ return res;
+ }
+#endif /* CONFIG_SERIAL_8250 */
+ res = platform_device_register(&physmap_flash);
+ if (res)
+ return res;
+
+ ar7_device_disable(vlynq_low_data.reset_bit);
+ res = platform_device_register(&vlynq_low);
+ if (res)
+ return res;
+
+ if (ar7_has_high_vlynq()) {
+ ar7_device_disable(vlynq_high_data.reset_bit);
+ res = platform_device_register(&vlynq_high);
+ if (res)
+ return res;
+ }
+
+ if (ar7_has_high_cpmac()) {
+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
+ res = platform_device_register(&cpmac_high);
+ if (res)
+ return res;
+ } else {
+ cpmac_low_data.phy_mask = 0xffffffff;
+ }
+
+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ res = platform_device_register(&cpmac_low);
+ if (res)
+ return res;
+
+ detect_leds();
+ res = platform_device_register(&ar7_gpio_leds);
+ if (res)
+ return res;
+
+ res = platform_device_register(&ar7_udc);
+
+ return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 0000000..5ad6f1d
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+ char *name;
+ char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+ int i;
+ for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+ if (!strcmp(name, adam2_env[i].name))
+ return adam2_env[i].value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+static void __init ar7_init_cmdline(int argc, char *argv[])
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while (actr < argc) {
+ strcpy(cp, argv[actr]);
+ cp += strlen(argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) {
+ /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+ }
+}
+
+struct psbl_rec {
+ u32 psbl_size;
+ u32 env_base;
+ u32 env_size;
+ u32 ffs_base;
+ u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+ u8 num;
+ u8 ctrl;
+ u16 csum;
+ u8 len;
+ char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+ u8 num;
+ char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+ { 1, "cpufrequency" },
+ { 2, "memsize" },
+ { 3, "flashsize" },
+ { 4, "modetty0" },
+ { 5, "modetty1" },
+ { 8, "maca" },
+ { 9, "macb" },
+ { 28, "sysfrequency" },
+ { 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE 4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(psp_var_map); i++)
+ if (psp_var_map[i].num == num)
+ return psp_var_map[i].value;
+
+ return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+ int i;
+ for (i = 0; i < MAX_ENTRY; i++) {
+ if (!adam2_env[i].name) {
+ adam2_env[i].name = name;
+ adam2_env[i].value = value;
+ return;
+ } else if (!strcmp(adam2_env[i].name, name)) {
+ adam2_env[i].value = value;
+ return;
+ }
+ }
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+ int i, n;
+ char *name, *value;
+ struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+ memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+ i = 1;
+ n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+ while (i < n) {
+ if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+ break;
+ value = chunks[i].data;
+ if (chunks[i].num) {
+ name = lookup_psp_var_map(chunks[i].num);
+ } else {
+ name = value;
+ value += strlen(name) + 1;
+ }
+ if (name)
+ add_adam2_var(name, value);
+ i += chunks[i].len;
+ }
+ return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+ int i;
+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+ if (strcmp(psp_env, psp_env_version) == 0) {
+ parse_psp_env(psp_env);
+ } else {
+ for (i = 0; i < MAX_ENTRY; i++, env++)
+ if (env->name)
+ add_adam2_var(env->name, env->value);
+ }
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char console_string[40];
+ int baud = 0;
+ char parity = '\0', bits = '\0', flow = '\0';
+ char *s, *p;
+
+ if (strstr(prom_getcmdline(), "console="))
+ return;
+
+#ifdef CONFIG_KGDB
+ if (!strstr(prom_getcmdline(), "nokgdb")) {
+ strcat(prom_getcmdline(), " console=kgdb");
+ kgdb_enabled = 1;
+ return;
+ }
+#endif
+
+ s = prom_getenv("modetty0");
+ if (s) {
+ baud = simple_strtoul(s, &p, 10);
+ s = p;
+ if (*s == ',')
+ s++;
+ if (*s)
+ parity = *s++;
+ if (*s == ',')
+ s++;
+ if (*s)
+ bits = *s++;
+ if (*s == ',')
+ s++;
+ if (*s == 'h')
+ flow = 'r';
+ }
+
+ if (baud == 0)
+ baud = 38400;
+ if (parity != 'n' && parity != 'o' && parity != 'e')
+ parity = 'n';
+ if (bits != '7' && bits != '8')
+ bits = '8';
+
+ if (flow == 'r')
+ sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+ parity, bits, flow);
+ else
+ sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+ bits);
+ strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+ ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+ ar7_init_env((struct env_var *)fw_arg2);
+ console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+ return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+ writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+ while (!(serial_in(UART_LSR) & UART_LSR_DR))
+ ;
+ return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+ while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+ ;
+ serial_out(UART_TX, c);
+ return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 0000000..39f6b5b
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,93 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+ u32 *softres_reg = ioremap(AR7_REGS_RESET +
+ AR7_RESET_SOFTWARE, 1);
+ writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+ while (1)
+ ;
+}
+
+static void ar7_machine_power_off(void)
+{
+ u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+ u32 power_state = readl(power_reg) | (3 << 30);
+ writel(power_state, power_reg);
+ ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7300:
+ return "TI AR7 (TNETD7300)";
+ case AR7_CHIP_7100:
+ return "TI AR7 (TNETD7100)";
+ case AR7_CHIP_7200:
+ return "TI AR7 (TNETD7200)";
+ default:
+ return "TI AR7 (Unknown)";
+ }
+}
+
+static int __init ar7_init_console(void)
+{
+ return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+ unsigned long io_base;
+
+ _machine_restart = ar7_machine_restart;
+ _machine_halt = ar7_machine_halt;
+ pm_power_off = ar7_machine_power_off;
+ panic_timeout = 3;
+
+ io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+ if (!io_base)
+ panic("Can't remap IO base!\n");
+ set_io_port_base(io_base);
+
+ prom_meminit();
+
+ printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+ get_system_type(),
+ ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 0000000..a1fba89
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+ mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b..d6903c3 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@
obj-y += octeon-memcpy.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_PCI) += pci-common.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_PCI) += pcie.o
-obj-$(CONFIG_PCI_MSI) += msi.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162..4b92bfc 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
#include <dma-coherence.h>
#ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
#endif
#define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f8..0000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
- * enumerates through all the bridges and figures out the
- * slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
- * as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (octeon_pcibios_map_irq)
- return octeon_pcibios_map_irq(dev, slot, pin);
- else
- panic("octeon_pcibios_map_irq doesn't point to a "
- "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- uint16_t config;
- uint32_t dconfig;
- int pos;
- /*
- * Force the Cache line setting to 64 bytes. The standard
- * Linux bus scan doesn't seem to set it. Octeon really has
- * 128 byte lines, but Intel bridges get really upset if you
- * try and set values above 64 bytes. Value is specified in
- * 32bit words.
- */
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
- /* Set latency timers for all devices */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
- /* Enable reporting System errors and parity errors on all devices */
- /* Enable parity checking and error reporting */
- pci_read_config_word(dev, PCI_COMMAND, &config);
- config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- pci_write_config_word(dev, PCI_COMMAND, config);
-
- if (dev->subordinate) {
- /* Set latency timers on sub bridges */
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
- /* More bridge error detection */
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
- config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
- }
-
- /* Enable the PCIe normal error reporting */
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (pos) {
- /* Update Device Control */
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
- /* Correctable Error Reporting */
- config |= PCI_EXP_DEVCTL_CERE;
- /* Non-Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_NFERE;
- /* Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_FERE;
- /* Unsupported Request */
- config |= PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
- }
-
- /* Find the Advanced Error Reporting capability */
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (pos) {
- /* Clear Uncorrectable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- dconfig);
- /* Enable reporting of all uncorrectable errors */
- /* Uncorrectable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
- /*
- * Leave severity at HW default. This only controls if
- * errors are reported as uncorrectable or
- * correctable, not if the error is reported.
- */
- /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
- /* Clear Correctable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
- /* Enable reporting of all correctable errors */
- /* Correctable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
- /* Advanced Error Capabilities */
- pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
- /* ECRC Generation Enable */
- if (config & PCI_ERR_CAP_ECRC_GENC)
- config |= PCI_ERR_CAP_ECRC_GENE;
- /* ECRC Check Enable */
- if (config & PCI_ERR_CAP_ECRC_CHKC)
- config |= PCI_ERR_CAP_ECRC_CHKE;
- pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
- /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
- /* Report all errors to the root complex */
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
- PCI_ERR_ROOT_CMD_COR_EN |
- PCI_ERR_ROOT_CMD_NONFATAL_EN |
- PCI_ERR_ROOT_CMD_FATAL_EN);
- /* Clear the Root status register */
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
- }
-
- return 0;
-}
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h
deleted file mode 100644
index 74ae799..0000000
--- a/arch/mips/cavium-octeon/pci-common.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
-
-#include <linux/pci.h>
-
-/* Some PCI cards require delays when accessing config space. */
-#define PCI_CONFIG_SPACE_DELAY 10000
-
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
- Octeon specific version pointed to by this variable. This function needs to
- change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-
-/* The following defines are only used when octeon_dma_bar_type =
- OCTEON_DMA_BAR_TYPE_BIG */
-#define OCTEON_PCI_BAR1_HOLE_BITS 5
-#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
-
-enum octeon_dma_bar_type {
- OCTEON_DMA_BAR_TYPE_INVALID,
- OCTEON_DMA_BAR_TYPE_SMALL,
- OCTEON_DMA_BAR_TYPE_BIG,
- OCTEON_DMA_BAR_TYPE_PCIE
-};
-
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
- */
-extern enum octeon_dma_bar_type octeon_dma_bar_type;
-
-#endif
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 0b891a9..32d51a31 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -194,11 +194,11 @@
void octeon_prepare_cpus(unsigned int max_cpus)
{
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
- if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
+ if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
"mailbox0", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
}
- if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
+ if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
"mailbox1", mailbox_interrupt)) {
panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
}
diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e14398..4eaec8b4 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
/*
* Cobalt buttons platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4f..0f1cd90 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt LCD platform device.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd4..d3ce6fa 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt LED platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef..691d620 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt MTD device.
*
- * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b..3ab3989 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt RTC platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d..7cb51f5 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
/*
* Registration of Cobalt UART platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7..0162f9e 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
/*
* Cobalt time initialization.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 0000000..dad5b67
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6a17c9b..7abce66 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/dec/ecc-berr.c
- *
* Bus error event handling code for systems equipped with ECC
* handling logic, i.e. DECstation/DECsystem 5000/200 (KN02),
* 5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 00cecdc..82c85281 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -1,6 +1,4 @@
/*
- * arch/mips/dec/int-handler.S
- *
* Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
* Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
*
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 3acb133..cb41954 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/dec/ioasic-irq.c
- *
* DEC I/O ASIC interrupts.
*
* Copyright (c) 2002, 2003 Maciej W. Rozycki
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
index d3b8002..b0dc6d5 100644
--- a/arch/mips/dec/kn01-berr.c
+++ b/arch/mips/dec/kn01-berr.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/dec/kn01-berr.c
- *
* Bus error event handling code for DECstation/DECsystem 3100
* and 2100 (KN01) systems equipped with parity error detection
* logic.
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index 02439dc..ed90a8d 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/dec/kn02-irq.c
- *
* DECstation 5000/200 (KN02) Control and Status Register
* interrupts.
*
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
index 5f04545..07ca540 100644
--- a/arch/mips/dec/kn02xa-berr.c
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/dec/kn02xa-berr.c
- *
* Bus error event handling code for 5000-series systems equipped
* with parity error detection logic, i.e. DECstation/DECsystem
* 5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index e523454..8c84981 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -1,6 +1,4 @@
/*
- * arch/mips/dec/prom/call_o32.S
- *
* O32 interface for the 64 (or N32) ABI.
*
* Copyright (C) 2002 Maciej W. Rozycki
diff --git a/arch/mips/dec/prom/console.c b/arch/mips/dec/prom/console.c
index 078e1a1..caa6e04 100644
--- a/arch/mips/dec/prom/console.c
+++ b/arch/mips/dec/prom/console.c
@@ -1,6 +1,4 @@
/*
- * arch/mips/dec/prom/console.c
- *
* DECstation PROM-based early console support.
*
* Copyright (C) 2004, 2007 Maciej W. Rozycki
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 1359c03..463136e 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/dec/time.c
- *
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
* Copyright (C) 2000, 2003 Maciej W. Rozycki
*
diff --git a/arch/mips/emma/common/Makefile b/arch/mips/emma/common/Makefile
index c392d28..f27d84d 100644
--- a/arch/mips/emma/common/Makefile
+++ b/arch/mips/emma/common/Makefile
@@ -1,7 +1,4 @@
#
-# arch/mips/emma2rh/common/Makefile
-# Makefile for the common code of NEC EMMA2RH based board.
-#
# Copyright (C) NEC Electronics Corporation 2005-2006
#
# This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c
index 120f53f..708f087 100644
--- a/arch/mips/emma/common/prom.c
+++ b/arch/mips/emma/common/prom.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/emma2rh/common/prom.c
- * This file is prom file.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/common/prom.c
diff --git a/arch/mips/emma/markeins/Makefile b/arch/mips/emma/markeins/Makefile
index 16e0017..f8ba250 100644
--- a/arch/mips/emma/markeins/Makefile
+++ b/arch/mips/emma/markeins/Makefile
@@ -1,7 +1,4 @@
#
-# arch/mips/emma2rh/markeins/Makefile
-# Makefile for the common code of NEC EMMA2RH based board.
-#
# Copyright (C) NEC Electronics Corporation 2005-2006
#
# This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 43828ae..9504b7e 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/emma2rh/markeins/irq.c
- * This file defines the irq handler for EMMA2RH.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
diff --git a/arch/mips/emma/markeins/led.c b/arch/mips/emma/markeins/led.c
index 377a181..4975589 100644
--- a/arch/mips/emma/markeins/led.c
+++ b/arch/mips/emma/markeins/led.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/emma2rh/markeins/led.c
- * This file defines the led display for Mark-eins.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
index 80ae12e..b05b08b 100644
--- a/arch/mips/emma/markeins/platform.c
+++ b/arch/mips/emma/markeins/platform.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/emma2rh/markeins/platofrm.c
- * This file sets up platform devices for EMMA2RH Mark-eins.
- *
* Copyright(C) MontaVista Software Inc, 2006
*
* Author: dmitry pervushin <dpervushin@ru.mvista.com>
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index 67f4565..335dc8c 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/emma2rh/markeins/setup.c
- * This file is setup for EMMA2RH Mark-eins.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c.
diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S
index bdf7d1d..e0a68713 100644
--- a/arch/mips/fw/lib/call_o32.S
+++ b/arch/mips/fw/lib/call_o32.S
@@ -1,6 +1,4 @@
/*
- * arch/mips/dec/prom/call_o32.S
- *
* O32 interface for the 64 (or N32) ABI.
*
* Copyright (C) 2002 Maciej W. Rozycki
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2f..6f9d085 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
/*
* Registration of WRPPMC UART platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 0000000..c3dc1a6
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+ unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e..3af0b8f 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
/*
* DS1287 timer functions.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128..7990694 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@
extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+#ifndef ELF_CORE_COPY_REGS
#define ELF_CORE_COPY_REGS(elf_regs, regs) \
elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
dump_task_fpu(tsk, elf_fpregs)
diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h
index 30aea91..2afb2fe 100644
--- a/arch/mips/include/asm/emma/emma2rh.h
+++ b/arch/mips/include/asm/emma/emma2rh.h
@@ -1,7 +1,4 @@
/*
- * arch/mips/include/asm/emma/emma2rh.h
- * This file is EMMA2RH common header.
- *
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h
index 973b062..2618bf2 100644
--- a/arch/mips/include/asm/emma/markeins.h
+++ b/arch/mips/include/asm/emma/markeins.h
@@ -1,7 +1,4 @@
/*
- * include/asm-mips/emma2rh/markeins.h
- * This file is EMMA2RH board depended header.
- *
* Copyright (C) NEC Electronics Corporation 2005-2006
*
* This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4..36fd969 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
#define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */
#define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
#endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d..a8f5734 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
+#ifdef CONFIG_SMP
+#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
+#else
#define GIC_NUM_INTRS 32
+#endif
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
@@ -483,5 +487,7 @@
extern unsigned int gic_get_int(void);
extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3a..250a240 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
/*
* Galileo/Marvell GT641xx IRQ definitions.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 0000000..de71694
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE 0x14000000
+
+#define AR7_REGS_BASE 0x08610000
+
+#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL 0x0
+#define AR7_RESET_SOFTWARE 0x4
+#define AR7_RESET_STATUS 0x8
+
+#define AR7_RESET_BIT_CPMAC_LO 17
+#define AR7_RESET_BIT_CPMAC_HI 21
+#define AR7_RESET_BIT_MDIO 22
+#define AR7_RESET_BIT_EPHY 26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT 0x0
+#define AR7_GPIO_OUTPUT 0x4
+#define AR7_GPIO_DIR 0x8
+#define AR7_GPIO_ENABLE 0xc
+
+#define AR7_CHIP_7100 0x18
+#define AR7_CHIP_7200 0x2b
+#define AR7_CHIP_7300 0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0 15
+#define AR7_IRQ_UART1 16
+
+/* Clocks */
+#define AR7_AFE_CLOCK 35328000
+#define AR7_REF_CLOCK 25000000
+#define AR7_XTAL_CLOCK 24000000
+
+struct plat_cpmac_data {
+ int reset_bit;
+ int power_bit;
+ u32 phy_mask;
+ char dev_addr[6];
+};
+
+struct plat_dsl_data {
+ int reset_bit_dsl;
+ int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+ return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+ return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+ return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+ return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+ return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+ return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+ u16 chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ return 0;
+ case AR7_CHIP_7300:
+ return 1;
+ default:
+ return -ENXIO;
+ }
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+ void *reset_reg =
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) | (1 << bit), reset_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+ void *reset_reg =
+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+ writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+ ar7_device_disable(bit);
+ ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) | (1 << bit), power_reg);
+ msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+ writel(readl(power_reg) & ~(1 << bit), power_reg);
+ msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 0000000..cbe9c4f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+ void __iomem *gpio_in =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+ return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ void __iomem *gpio_out =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+ unsigned tmp;
+
+ tmp = readl(gpio_out) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ void __iomem *gpio_dir =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ void __iomem *gpio_dir =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+ if (gpio >= AR7_GPIO_MAX)
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+ void __iomem *gpio_en =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+ writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+ return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+ void __iomem *gpio_en =
+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+ return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 0000000..39e9757
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 0000000..088f61fe
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 0000000..ac28f27
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET 0x94000000UL
+#define PHYS_OFFSET 0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 0000000..f4862b5
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9a..9da9acf 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
* Copyright (C) 1997 Cobalt Microserver
* Copyright (C) 1997, 2003 Ralf Baechle
* Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*/
#ifndef _ASM_COBALT_IRQ_H
#define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c552..f8afec3 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
new file mode 100644
index 0000000..6ac5d3e
--- /dev/null
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2009 Cavium Networks
+ */
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
+
+#include <linux/pci.h>
+
+/* Some PCI cards require delays when accessing config space. */
+#define PCI_CONFIG_SPACE_DELAY 10000
+
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+ u8 slot, u8 pin);
+
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
+#define OCTEON_PCI_BAR1_HOLE_BITS 5
+#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
+
+enum octeon_dma_bar_type {
+ OCTEON_DMA_BAR_TYPE_INVALID,
+ OCTEON_DMA_BAR_TYPE_SMALL,
+ OCTEON_DMA_BAR_TYPE_BIG,
+ OCTEON_DMA_BAR_TYPE_PCIE
+};
+
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
+ */
+extern enum octeon_dma_bar_type octeon_dma_bar_type;
+
+#endif
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa7..96a14a4 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -165,7 +165,14 @@
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn); \
+ /* avoid <linux/bootmem.h> include hell */ \
+ extern unsigned long min_low_pfn; \
+ \
+ __pfn >= min_low_pfn && __pfn < max_mapnr; \
+})
#elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 1275831..3738f4b4 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -98,23 +98,12 @@
__free_pages(pte, PTE_ORDER);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \
} while (0)
-#ifdef CONFIG_32BIT
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
-
-#endif
-
#ifdef CONFIG_64BIT
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
@@ -132,7 +121,7 @@
free_pages((unsigned long)pmd, PMD_ORDER);
}
-#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x)
+#define __pmd_free_tlb(tlb, x, addr) pmd_free((tlb)->mm, x)
#endif
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
index 0bf48fc..9e2ee42 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -23,6 +23,8 @@
#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
defined(CONFIG_PMC_MSP7120_FPGA)
#define MIPS34K_MISSED_ITLB_WAR 1
+#else
+#define MIPS34K_MISSED_ITLB_WAR 0
#endif
#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 0f926aa..087a888 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -311,8 +311,9 @@
unsigned long get_wchan(struct task_struct *p);
-#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
-#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
+ THREAD_SIZE - 32 - sizeof(struct pt_regs))
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk))
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d..910e71a 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
#endif
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
#define EF_R0 0
#define EF_R1 1
diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0..97c2f81 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@
}
#define __arch_swab32 __arch_swab32
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
@@ -50,6 +54,6 @@
return x;
}
#define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
#endif /* CONFIG_CPU_MIPSR2 */
#endif /* _ASM_SWAB_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 143a481..f9df720 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -39,8 +39,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -48,7 +46,7 @@
.exec_domain = &default_exec_domain, \
.flags = _TIF_FIXADE, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 4000501..e753a77 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,19 @@
#define __NR_inotify_init1 (__NR_Linux + 329)
#define __NR_preadv (__NR_Linux + 330)
#define __NR_pwritev (__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 332)
+#define __NR_perf_counter_open (__NR_Linux + 333)
+#define __NR_accept4 (__NR_Linux + 334)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 331
+#define __NR_Linux_syscalls 334
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 331
+#define __NR_O32_Linux_syscalls 334
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -660,16 +663,19 @@
#define __NR_inotify_init1 (__NR_Linux + 288)
#define __NR_preadv (__NR_Linux + 289)
#define __NR_pwritev (__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 291)
+#define __NR_perf_counter_open (__NR_Linux + 292)
+#define __NR_accept4 (__NR_Linux + 293)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 290
+#define __NR_Linux_syscalls 293
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 290
+#define __NR_64_Linux_syscalls 293
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -972,16 +978,19 @@
#define __NR_inotify_init1 (__NR_Linux + 292)
#define __NR_preadv (__NR_Linux + 293)
#define __NR_pwritev (__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 295)
+#define __NR_perf_counter_open (__NR_Linux + 296)
+#define __NR_accept4 (__NR_Linux + 297)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 294
+#define __NR_Linux_syscalls 297
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 294
+#define __NR_N32_Linux_syscalls 297
#ifdef __KERNEL__
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a..fcc6569 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
/*
* capcella.h, Include file for ZAO Networks Capcella.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a..6a90bc1 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series General-purpose I/O Unit.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@
IRQ_SIGNAL_HOLD,
} irq_signal_t;
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+ irq_signal_t signal);
typedef enum {
IRQ_LEVEL_LOW,
@@ -51,23 +52,6 @@
extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
typedef enum {
- GPIO_DATA_LOW,
- GPIO_DATA_HIGH,
- GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
- GPIO_INPUT,
- GPIO_OUTPUT,
- GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
-typedef enum {
GPIO_PULL_DOWN,
GPIO_PULL_UP,
GPIO_PULL_DISABLE,
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfb..b07f732 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
* Copyright (C) 2001, 2002 Paul Mundt
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df8..130d09d 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
/*
* mpc30x.h, Include file for Victor MP-C303/304.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce..c231a3d 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series PCI Control Unit.
*
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e3..ca806bc 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
/*
* Include file for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4..c78e824 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
/*
* tb0219.h, Include file for TANBAC TB0219.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* Modified for TANBAC TB0219:
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dc..36f5f79 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
/*
* tb0226.h, Include file for TANBAC TB0226.
*
- * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be649..7b96a43 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
* Copyright (C) 2001, 2002 Paul Mundt
* Copyright (C) 2002 MontaVista Software, Inc.
* Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index f0fd636..0d64d0f 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -190,7 +190,7 @@
return -1;
}
- while (pgtbl[i].owner == laddr && i < VDMA_PGTBL_ENTRIES) {
+ while (i < VDMA_PGTBL_ENTRIES && pgtbl[i].owner == laddr) {
pgtbl[i].owner = VDMA_PAGE_EMPTY;
i++;
}
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7..ff44823 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@
#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2)
#include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest) \
+({ \
+ int __res = 1; \
+ elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk)); \
+ __res; \
+})
+
#include <linux/module.h>
#include <linux/elfcore.h>
#include <linux/compat.h>
@@ -110,9 +127,6 @@
value->tv_usec = rem / NSEC_PER_USEC;
}
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
{
int i;
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45e..6996da4 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
/*
* DS1287 clockevent driver
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787f..92351e0 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
/*
* GT641xx clockevent routines.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48..23da108 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
/*
* DEC I/O ASIC's counter clocksource
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 492a0a8..531ce7b 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -188,7 +188,8 @@
MTC0 zero, CP0_CONTEXT # clear context register
PTR_LA $28, init_thread_union
- PTR_LI sp, _THREAD_SIZE - 32
+ /* Set the SP after an empty pt_regs. */
+ PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE
PTR_ADDU sp, $28
set_saved_sp sp, t0, t1
PTR_SUBU sp, 4 * SZREG # init stack pointer
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f1..d2072cd 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_SET_INTR_MASK(irq, 1);
return 0;
}
@@ -120,8 +118,7 @@
#endif
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_CLR_INTR_MASK(irq, 1);
if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_CLR_INTR_MASK(irq, 1);
}
static void gic_unmask_irq(unsigned int irq)
{
pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
- GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
- 1 << (irq % 32));
+ GIC_SET_INTR_MASK(irq, 1);
}
#ifdef CONFIG_SMP
@@ -254,6 +247,10 @@
if (cpu == X)
continue;
+ if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+ _intrmap[i].ipiflag == 0)
+ continue;
+
setup_intr(_intrmap[i].intrnum,
_intrmap[i].cpunum,
_intrmap[i].pin,
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b13..ebcc5f7 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
/*
* GT641xx IRQ routines.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c
index a4d1462..9b78029 100644
--- a/arch/mips/kernel/irq_txx9.c
+++ b/arch/mips/kernel/irq_txx9.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/kernel/irq_txx9.c
- *
* Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
* linux/arch/mips/tx4927/common/tx4927_irq.c,
* linux/arch/mips/tx4938/common/irq.c
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 3e9100d..6f51dda 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -98,7 +98,8 @@
static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
{
if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+ me->name);
return -ENOEXEC;
}
@@ -118,7 +119,8 @@
static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
{
if (v % 4) {
- printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+ me->name);
return -ENOEXEC;
}
@@ -222,7 +224,7 @@
return 0;
out_danger:
- printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+ pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
return -ENOEXEC;
}
@@ -301,7 +303,7 @@
/* This is the symbol it is referring to */
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
- if (!sym->st_value) {
+ if (IS_ERR_VALUE(sym->st_value)) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
@@ -341,7 +343,7 @@
/* This is the symbol it is referring to */
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(rel[i]);
- if (!sym->st_value) {
+ if (IS_ERR_VALUE(sym->st_value)) {
/* Ignore unresolved weak symbol */
if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
continue;
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index e0a4ac1..26109c4 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/kernel/proc.c
- *
* Copyright (C) 1995, 1996, 2001 Ralf Baechle
* Copyright (C) 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2004 Maciej W. Rozycki
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c09d681..f3d73e1 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -115,7 +115,7 @@
{
struct thread_info *ti = task_thread_info(p);
struct pt_regs *childregs;
- long childksp;
+ unsigned long childksp;
p->set_child_tid = p->clear_child_tid = NULL;
childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
@@ -132,6 +132,8 @@
/* set up new TSS. */
childregs = (struct pt_regs *) childksp - 1;
+ /* Put the stack after the struct pt_regs. */
+ childksp = (unsigned long) childregs;
*childregs = *regs;
childregs->regs[7] = 0; /* Clear error flag */
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index c4f9ac1..32644b4 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -22,7 +22,6 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/user.h>
#include <linux/security.h>
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9b..b570821 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,9 @@
sys sys_inotify_init1 1
sys sys_preadv 6 /* 4330 */
sys sys_pwritev 6
+ sys sys_rt_tgsigqueueinfo 4
+ sys sys_perf_counter_open 5
+ sys sys_accept4 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6..3d866f2 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,7 @@
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev /* 5390 */
+ PTR sys_rt_tgsigqueueinfo
+ PTR sys_perf_counter_open
+ PTR sys_accept4
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672..e855b11 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,7 @@
PTR sys_inotify_init1
PTR sys_preadv
PTR sys_pwritev
+ PTR compat_sys_rt_tgsigqueueinfo /* 5295 */
+ PTR sys_perf_counter_open
+ PTR sys_accept4
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2..0c49f1a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,7 @@
PTR sys_inotify_init1
PTR compat_sys_preadv /* 4330 */
PTR compat_sys_pwritev
+ PTR compat_sys_rt_tgsigqueueinfo
+ PTR sys_perf_counter_open
+ PTR sys_accept4
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be06..ad0ff5d 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
- cpumask_t cpu_allow_map;
- char buf[256];
- int len;
-
- cpus_clear(cpu_allow_map);
- if (cpulist_parse(str, &cpu_allow_map) == 0) {
- cpu_set(0, cpu_allow_map);
- cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
- len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
- buf[len] = '\0';
- pr_debug("Allowable CPUs: %s\n", buf);
- return 1;
- } else
- return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
static void ipi_call_function(unsigned int cpu)
{
- unsigned int action = 0;
-
pr_debug("CPU%d: %s cpu %d status %08x\n",
smp_processor_id(), __func__, cpu, read_c0_status());
- switch (cpu) {
- case 0:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
- break;
- case 1:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
- break;
- case 2:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
- break;
- case 3:
- action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
- break;
- }
- gic_send_ipi(action);
+ gic_send_ipi(plat_ipi_call_int_xlate(cpu));
}
static void ipi_resched(unsigned int cpu)
{
- unsigned int action = 0;
-
pr_debug("CPU%d: %s cpu %d status %08x\n",
smp_processor_id(), __func__, cpu, read_c0_status());
- switch (cpu) {
- case 0:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
- break;
- case 1:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
- break;
- case 2:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
- break;
- case 3:
- action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
- break;
- }
- gic_send_ipi(action);
+ gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
}
/*
@@ -206,7 +150,7 @@
(unsigned long)(gp + sizeof(struct thread_info)));
#endif
- amon_cpu_start(cpu, pc, sp, gp, a0);
+ amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
}
/*
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 8a0626c..c16bb6d 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -465,11 +465,8 @@
smtc_configure_tlb();
for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
- /*
- * Set the MVP bits.
- */
- settc(tc);
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP);
+ if (tcpervpe[vpe] == 0)
+ continue;
if (vpe != 0)
printk(", ");
printk("VPE %d: TC", vpe);
@@ -488,6 +485,12 @@
}
if (vpe != 0) {
/*
+ * Allow this VPE to control others.
+ */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
+ VPECONF0_MVP);
+
+ /*
* Clear any stale software interrupts from VPE's Cause
*/
write_vpe_c0_cause(0);
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 58f5cd7..d52ff77 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -1,6 +1,4 @@
/*
- * arch/mips/kernel/stacktrace.c
- *
* Stack trace management functions
*
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108..05dd170 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
/*
* Count register synchronisation.
*
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
* value. This can cause a small timewarp for CPU0. All other CPU's should
* not have done anything significant (but they may have had interrupts
* enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
+#include <asm/r4k-timer.h>
#include <asm/atomic.h>
#include <asm/barrier.h>
-#include <asm/cpumask.h>
#include <asm/mipsregs.h>
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
#define COUNTON 100
#define NR_LOOPS 5
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
{
int i;
unsigned long flags;
@@ -42,19 +43,20 @@
return;
#endif
- pr_info("Checking COUNT synchronization across %u CPUs: ",
- num_online_cpus());
+ printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+ num_online_cpus());
local_irq_save(flags);
/*
* Notify the slaves that it's time to start
*/
+ atomic_set(&count_reference, read_c0_count());
atomic_set(&count_start_flag, 1);
smp_wmb();
- /* Count will be initialised to expirelo for all CPU's */
- initcount = expirelo;
+ /* Count will be initialised to current timer for all CPU's */
+ initcount = read_c0_count();
/*
* We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@
printk("done.\n");
}
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
{
int i;
unsigned long flags;
@@ -131,8 +133,8 @@
while (!atomic_read(&count_start_flag))
mb();
- /* Count will be initialised to expirelo for all CPU's */
- initcount = expirelo;
+ /* Count will be initialised to next expire for all CPU's */
+ initcount = atomic_read(&count_reference);
ncpus = num_online_cpus();
for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@
local_irq_restore(flags);
}
#undef NR_LOOPS
-#endif
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42..9a1ab7e 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -73,7 +73,7 @@
static const int minor = 1; /* fixed for now */
#ifdef CONFIG_MIPS_APSP_KSPD
- static struct kspd_notifications kspd_events;
+static struct kspd_notifications kspd_events;
static int kspd_events_reqd = 0;
#endif
@@ -155,10 +155,9 @@
};
static void release_progmem(void *ptr);
-extern void save_gp_address(unsigned int secbase, unsigned int rel);
/* get the vpe associated with this minor */
-struct vpe *get_vpe(int minor)
+static struct vpe *get_vpe(int minor)
{
struct vpe *v;
@@ -174,7 +173,7 @@
}
/* get the vpe associated with this minor */
-struct tc *get_tc(int index)
+static struct tc *get_tc(int index)
{
struct tc *t;
@@ -186,20 +185,8 @@
return NULL;
}
-struct tc *get_tc_unused(void)
-{
- struct tc *t;
-
- list_for_each_entry(t, &vpecontrol.tc_list, list) {
- if (t->state == TC_STATE_UNUSED)
- return t;
- }
-
- return NULL;
-}
-
/* allocate a vpe and associate it with this minor (or index) */
-struct vpe *alloc_vpe(int minor)
+static struct vpe *alloc_vpe(int minor)
{
struct vpe *v;
@@ -216,7 +203,7 @@
}
/* allocate a tc. At startup only tc0 is running, all other can be halted. */
-struct tc *alloc_tc(int index)
+static struct tc *alloc_tc(int index)
{
struct tc *tc;
@@ -232,7 +219,7 @@
}
/* clean up and free everything */
-void release_vpe(struct vpe *v)
+static void release_vpe(struct vpe *v)
{
list_del(&v->list);
if (v->load_addr)
@@ -240,7 +227,7 @@
kfree(v);
}
-void dump_mtregs(void)
+static void dump_mtregs(void)
{
unsigned long val;
@@ -327,7 +314,8 @@
|| (s->sh_flags & masks[m][1])
|| s->sh_entsize != ~0UL)
continue;
- s->sh_entsize = get_offset(&mod->core_size, s);
+ s->sh_entsize =
+ get_offset((unsigned long *)&mod->core_size, s);
}
if (m == 0)
@@ -461,16 +449,15 @@
{
unsigned long insnlo = *location;
Elf32_Addr val, vallo;
+ struct mips_hi16 *l, *next;
/* Sign extend the addend we extract from the lo insn. */
vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
if (mips_hi16_list != NULL) {
- struct mips_hi16 *l;
l = mips_hi16_list;
while (l != NULL) {
- struct mips_hi16 *next;
unsigned long insn;
/*
@@ -480,7 +467,7 @@
printk(KERN_DEBUG "VPE loader: "
"apply_r_mips_lo16/hi16: \t"
"inconsistent value information\n");
- return -ENOEXEC;
+ goto out_free;
}
/*
@@ -518,6 +505,16 @@
*location = insnlo;
return 0;
+
+out_free:
+ while (l != NULL) {
+ next = l->next;
+ kfree(l);
+ l = next;
+ }
+ mips_hi16_list = NULL;
+
+ return -ENOEXEC;
}
static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
@@ -541,7 +538,7 @@
[R_MIPS_PC16] = "MIPS_PC16"
};
-int apply_relocations(Elf32_Shdr *sechdrs,
+static int apply_relocations(Elf32_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
unsigned int relsec,
@@ -586,7 +583,7 @@
return 0;
}
-void save_gp_address(unsigned int secbase, unsigned int rel)
+static inline void save_gp_address(unsigned int secbase, unsigned int rel)
{
gp_addr = secbase + rel;
gp_offs = gp_addr - (secbase & 0xffff0000);
@@ -1387,7 +1384,7 @@
return len;
out_einval:
- return -EINVAL;;
+ return -EINVAL;
}
static struct device_attribute vpe_class_attributes[] = {
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index 0cea932..5492c42 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -89,13 +89,13 @@
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- } else {
-#endif
- {
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+ return mips_cpu_timer_irq;
}
+#endif
+ if (cpu_has_vint)
+ set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
return mips_cpu_timer_irq;
}
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index b165cdc..10ab69f 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -289,7 +289,7 @@
}
/**
- * Called when the the exception is not recoverable
+ * Called when the the exception is recoverable
*/
asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -298,7 +298,7 @@
}
/**
- * Called when the the exception is recoverable
+ * Called when the the exception is not recoverable
*/
asmlinkage void cache_parity_error_octeon_non_recoverable(void)
diff --git a/arch/mips/mm/extable.c b/arch/mips/mm/extable.c
index 297fb9f..9d25d2b 100644
--- a/arch/mips/mm/extable.c
+++ b/arch/mips/mm/extable.c
@@ -1,5 +1,9 @@
/*
- * linux/arch/mips/mm/extable.c
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/module.h>
#include <linux/spinlock.h>
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 6751ce9..f956ecb 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -171,6 +171,7 @@
* We ran out of memory, call the OOM killer, and return the userspace
* (which will retry the fault, or kill us if we got oom-killed).
*/
+ up_read(&mm->mmap_sem);
pagefault_out_of_memory();
return;
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 471c09a..8c2834f 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -16,7 +16,6 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sysctl.h>
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a..27c807b6 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
#include <asm/cacheflush.h>
#include <asm/traps.h>
+#include <asm/gcmpregs.h>
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@
void __init prom_init(void)
{
+ int result;
+
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@
#ifdef CONFIG_SERIAL_8250_CONSOLE
console_config();
#endif
+ /* Early detection of CMP support */
+ result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
#ifdef CONFIG_MIPS_CMP
- register_smp_ops(&cmp_smp_ops);
+ if (result)
+ register_smp_ops(&cmp_smp_ops);
#endif
#ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+ if (!result)
+ register_smp_ops(&vsmp_smp_ops);
+#else
register_smp_ops(&vsmp_smp_ops);
#endif
+#endif
#ifdef CONFIG_MIPS_MT_SMTC
register_smp_ops(&msmtc_smp_ops);
#endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf13..3e0a9b3 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -333,6 +333,21 @@
};
#endif /* CONFIG_MIPS_MT_SMP */
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+ return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+ return GIC_RESCHED_INT(cpu);
+}
+
static struct irqaction i8259irq = {
.handler = no_action,
.name = "XT-PIC cascade"
@@ -370,7 +385,7 @@
* Interrupts and CPUs/Core Interrupts. The nature of the External
* Interrupts is also defined here - polarity/trigger.
*/
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ GIC_EXT_INTR(0), X, X, X, X, 0 },
{ GIC_EXT_INTR(1), X, X, X, X, 0 },
{ GIC_EXT_INTR(2), X, X, X, X, 0 },
@@ -387,21 +402,14 @@
{ GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
{ GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
{ GIC_EXT_INTR(15), X, X, X, X, 0 },
- { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
- { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 },
+/* This is the end of the general interrupts now we do IPI ones */
};
#endif
/*
* GCMP needs to be detected before any SMP initialisation
*/
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
{
if (gcmp_present >= 0)
return gcmp_present;
@@ -416,28 +424,36 @@
}
#if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+ int intr = baseintr + cpu;
+ gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+ gic_intr_map[intr].cpunum = cpu;
+ gic_intr_map[intr].pin = cpupin;
+ gic_intr_map[intr].polarity = GIC_POL_POS;
+ gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+ gic_intr_map[intr].ipiflag = 1;
+ ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
static void __init fill_ipi_map(void)
{
- int i;
+ int cpu;
- for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
- if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
- ipi_map[gic_intr_map[i].cpunum] |=
- (1 << (gic_intr_map[i].pin + 2));
+ for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+ fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
}
}
#endif
void __init arch_init_irq(void)
{
- int gic_present, gcmp_present;
-
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
- gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
if (gcmp_present) {
GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
gic_present = 1;
@@ -514,24 +530,10 @@
if (gic_present) {
/* FIXME */
int i;
- struct {
- unsigned int resched;
- unsigned int call;
- } ipiirq[] = {
- {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0},
- {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1
- }, {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2
- }, {
- .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
- .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3
- }
- };
+
+ gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+ gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
fill_ipi_map();
gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
if (!gcmp_present) {
@@ -553,12 +555,15 @@
printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
write_c0_status(0x1100dc00);
printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
- for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
- setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
- setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
- set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
- set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+ for (i = 0; i < NR_CPUS; i++) {
+ setup_irq(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), &irq_resched);
+ setup_irq(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), &irq_call);
+ set_irq_handler(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), handle_percpu_irq);
+ set_irq_handler(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), handle_percpu_irq);
}
} else {
/* set up ipi interrupts */
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4d..f48d60e 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
#include <asm/reboot.h>
#include <asm/mips-boards/generic.h>
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
static void mips_machine_restart(char *command)
{
unsigned int __iomem *softres_reg =
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index 8df43e9..18b1927 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -138,7 +138,7 @@
* HZ timer interrupts per second.
*/
mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
- cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+ cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
write_c0_count(0);
timer_ack();
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f59e..63d8a29 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
+endif
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca..1c02f57 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
/*
* fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
*
- * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index fba5aad..0d9ccf4 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/pci/fixup-emma2rh.c
- * This file defines the PCI configration.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 5911596..e08f49c 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
/*
* fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
*
- * Copyright (C) 2002,2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002,2004 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index 0ad39e5..f0bb914 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -1,6 +1,4 @@
/*
- * arch/mips/pci/fixup-sb1250.c
- *
* Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
*
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733..8084b17 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
* fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
*
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4..4196ccf 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
/*
* fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
*
- * Copyright (C) 2002-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3d..2fe29db 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
/*
* fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/pci/msi-octeon.c
similarity index 87%
rename from arch/mips/cavium-octeon/msi.c
rename to arch/mips/pci/msi-octeon.c
index 964b03b..03742e6 100644
--- a/arch/mips/cavium-octeon/msi.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -16,8 +16,7 @@
#include <asm/octeon/cvmx-pci-defs.h>
#include <asm/octeon/cvmx-npei-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
/*
* Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
@@ -47,8 +46,8 @@
* programming the MSI control bits [6:4] before calling
* pci_enable_msi().
*
- * @param dev Device requesting MSI interrupts
- * @param desc MSI descriptor
+ * @dev: Device requesting MSI interrupts
+ * @desc: MSI descriptor
*
* Returns 0 on success.
*/
@@ -213,14 +212,9 @@
}
-/**
+/*
* Called by the interrupt handling code when an MSI interrupt
* occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
*/
static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
{
@@ -256,31 +250,37 @@
}
-/**
+/*
* Initializes the MSI interrupt handling code
- *
- * @return
*/
int octeon_msi_initialize(void)
{
- int r;
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
- r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+ if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
IRQF_SHARED,
- "MSI[0:63]", octeon_msi_interrupt);
+ "MSI[0:63]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
} else if (octeon_is_pci_host()) {
- r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+ if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
IRQF_SHARED,
- "MSI[0:15]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[16:31]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[32:47]", octeon_msi_interrupt);
- r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
- IRQF_SHARED,
- "MSI[48:63]", octeon_msi_interrupt);
+ "MSI[0:15]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[16:31]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[32:47]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+ if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+ IRQF_SHARED,
+ "MSI[48:63]", octeon_msi_interrupt))
+ panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
}
return 0;
}
diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c
index 5947a70..710aef5 100644
--- a/arch/mips/pci/ops-emma2rh.c
+++ b/arch/mips/pci/ops-emma2rh.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/pci/ops-emma2rh.c
- * This file defines the PCI operation for EMMA2RH.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/pci/ops-vr41xx.c
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b3..28962a7 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
* ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
*/
#include <linux/pci.h>
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
index 2df4190..773e34f 100644
--- a/arch/mips/pci/pci-emma2rh.c
+++ b/arch/mips/pci/pci-emma2rh.c
@@ -1,7 +1,4 @@
/*
- * arch/mips/pci/pci-emma2rh.c
- * This file defines the PCI configration.
- *
* Copyright (C) NEC Electronics Corporation 2004-2006
*
* This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/pci/pci-octeon.c
similarity index 78%
rename from arch/mips/cavium-octeon/pci.c
rename to arch/mips/pci/pci-octeon.c
index 67c0ff5..9cb0c807 100644
--- a/arch/mips/cavium-octeon/pci.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2005-2007 Cavium Networks
+ * Copyright (C) 2005-2009 Cavium Networks
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -17,8 +17,7 @@
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-npi-defs.h>
#include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
#define USE_OCTEON_INTERNAL_ARBITER
@@ -54,6 +53,126 @@
} s;
};
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+ u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev: The Linux PCI device structure for the device to map
+ * @slot: The slot number for this device on __BUS 0__. Linux
+ * enumerates through all the bridges and figures out the
+ * slot on Bus 0 where this device eventually hooks to.
+ * @pin: The PCI interrupt pin read from the device, then swizzled
+ * as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ if (octeon_pcibios_map_irq)
+ return octeon_pcibios_map_irq(dev, slot, pin);
+ else
+ panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ uint16_t config;
+ uint32_t dconfig;
+ int pos;
+ /*
+ * Force the Cache line setting to 64 bytes. The standard
+ * Linux bus scan doesn't seem to set it. Octeon really has
+ * 128 byte lines, but Intel bridges get really upset if you
+ * try and set values above 64 bytes. Value is specified in
+ * 32bit words.
+ */
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+ /* Set latency timers for all devices */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+ /* Enable reporting System errors and parity errors on all devices */
+ /* Enable parity checking and error reporting */
+ pci_read_config_word(dev, PCI_COMMAND, &config);
+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+ pci_write_config_word(dev, PCI_COMMAND, config);
+
+ if (dev->subordinate) {
+ /* Set latency timers on sub bridges */
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+ /* More bridge error detection */
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+ }
+
+ /* Enable the PCIe normal error reporting */
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pos) {
+ /* Update Device Control */
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+ /* Correctable Error Reporting */
+ config |= PCI_EXP_DEVCTL_CERE;
+ /* Non-Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_NFERE;
+ /* Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_FERE;
+ /* Unsupported Request */
+ config |= PCI_EXP_DEVCTL_URRE;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+ }
+
+ /* Find the Advanced Error Reporting capability */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (pos) {
+ /* Clear Uncorrectable Error Status */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ dconfig);
+ /* Enable reporting of all uncorrectable errors */
+ /* Uncorrectable Error Mask - turned on bits disable errors */
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+ /*
+ * Leave severity at HW default. This only controls if
+ * errors are reported as uncorrectable or
+ * correctable, not if the error is reported.
+ */
+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+ /* Clear Correctable Error Status */
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+ /* Enable reporting of all correctable errors */
+ /* Correctable Error Mask - turned on bits disable errors */
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+ /* Advanced Error Capabilities */
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+ /* ECRC Generation Enable */
+ if (config & PCI_ERR_CAP_ECRC_GENC)
+ config |= PCI_ERR_CAP_ECRC_GENE;
+ /* ECRC Check Enable */
+ if (config & PCI_ERR_CAP_ECRC_CHKC)
+ config |= PCI_ERR_CAP_ECRC_CHKE;
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+ /* Report all errors to the root complex */
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+ PCI_ERR_ROOT_CMD_COR_EN |
+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
+ PCI_ERR_ROOT_CMD_FATAL_EN);
+ /* Clear the Root status register */
+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+ }
+
+ return 0;
+}
+
/**
* Return the mapping of PCI device number to IRQ line. Each
* character in the return string represents the interrupt
@@ -136,9 +255,8 @@
}
-/**
+/*
* Read a value from configuration space
- *
*/
static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
@@ -174,15 +292,8 @@
}
-/**
+/*
* Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
*/
static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 val)
@@ -251,10 +362,8 @@
};
-/**
+/*
* Low level initialize the Octeon PCI controller
- *
- * Returns
*/
static void octeon_pci_initialize(void)
{
@@ -398,7 +507,7 @@
pci_int_arb_cfg.s.en = 1; /* Internal arbiter enable */
cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
}
-#endif /* USE_OCTEON_INTERNAL_ARBITER */
+#endif /* USE_OCTEON_INTERNAL_ARBITER */
/*
* Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
@@ -457,10 +566,8 @@
}
-/**
+/*
* Initialize the Octeon PCI controller
- *
- * Returns
*/
static int __init octeon_pci_setup(void)
{
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index aaa9005..a580740 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/pci/pci-tx4927.c
- *
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index 1ea257b..20e45f3 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/pci/pci-tx4938.c
- *
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
index 5fecf1c..9ef8406 100644
--- a/arch/mips/pci/pci-tx4939.c
+++ b/arch/mips/pci/pci-tx4939.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/pci/pci-tx4939.c
- *
* Based on linux/arch/mips/txx9/rbtx4939/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b..5652571 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
* pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2003 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org>
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
*/
#include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32..6b1ae2e 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
* pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/pci/pcie-octeon.c
similarity index 96%
rename from arch/mips/cavium-octeon/pcie.c
rename to arch/mips/pci/pcie-octeon.c
index 49d1408..6aa5c54 100644
--- a/arch/mips/cavium-octeon/pcie.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -18,8 +18,7 @@
#include <asm/octeon/cvmx-pescx-defs.h>
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
union cvmx_pcie_address {
uint64_t u64;
@@ -976,13 +975,13 @@
/**
* Map a PCI device to the appropriate interrupt line
*
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
+ * @dev: The Linux PCI device structure for the device to map
+ * @slot: The slot number for this device on __BUS 0__. Linux
* enumerates through all the bridges and figures out the
* slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
+ * @pin: The PCI interrupt pin read from the device, then swizzled
* as it goes through each bridge.
- * @return Interrupt number for the device
+ * Returns Interrupt number for the device
*/
int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
u8 slot, u8 pin)
@@ -1025,12 +1024,12 @@
/**
* Read a value from configuration space
*
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
*/
static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
unsigned int devfn, int reg, int size,
@@ -1041,19 +1040,29 @@
int bus_number = bus->number;
/*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * buses on root 0.
+ * For the top level bus make sure our hardware bus number
+ * matches the software one.
*/
- if (bus->parent == NULL)
- bus_number = 0;
+ if (bus->parent == NULL) {
+ union cvmx_pciercx_cfg006 pciercx_cfg006;
+ pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+ CVMX_PCIERCX_CFG006(pcie_port));
+ if (pciercx_cfg006.s.pbnum != bus_number) {
+ pciercx_cfg006.s.pbnum = bus_number;
+ pciercx_cfg006.s.sbnum = bus_number;
+ pciercx_cfg006.s.subbnum = bus_number;
+ cvmx_pcie_cfgx_write(pcie_port,
+ CVMX_PCIERCX_CFG006(pcie_port),
+ pciercx_cfg006.u32);
+ }
+ }
/*
* PCIe only has a single device connected to Octeon. It is
* always device ID 0. Don't bother doing reads for other
* device IDs on the first segment.
*/
- if ((bus_number == 0) && (devfn >> 3 != 0))
+ if ((bus->parent == NULL) && (devfn >> 3 != 0))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
@@ -1071,7 +1080,7 @@
* bridge only respondes to device ID 0, function
* 0-1
*/
- if ((bus_number == 0) && (devfn >= 2))
+ if ((bus->parent == NULL) && (devfn >= 2))
return PCIBIOS_FUNC_NOT_SUPPORTED;
/*
* The PCI-X slots are device ID 2,3. Choose one of
@@ -1156,25 +1165,18 @@
/**
* Write a value to PCI configuration space
*
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
*/
static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
unsigned int devfn, int reg,
int size, u32 val)
{
int bus_number = bus->number;
- /*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * busses on root 0.
- */
- if (bus->parent == NULL)
- bus_number = 0;
switch (size) {
case 4:
@@ -1254,7 +1256,7 @@
/**
* Initialize the Octeon PCIe controllers
*
- * @return
+ * Returns
*/
static int __init octeon_pcie_setup(void)
{
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c
index 69848c5..aaccbe5 100644
--- a/arch/mips/pmc-sierra/msp71xx/gpio.c
+++ b/arch/mips/pmc-sierra/msp71xx/gpio.c
@@ -1,6 +1,4 @@
/*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio.c
- *
* Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
* types of registers. The data register sets the output level when in output
* mode and when in input mode will contain the value at the input. The config
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
index fc6dbc6..2a99f36 100644
--- a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
+++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
@@ -1,6 +1,4 @@
/*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
- *
* Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
* a set of hardware registers that have no need for explicit locking as
* it is handled by unique method of writing individual set/clr bits.
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
index f5f1b8d..61f3902 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
@@ -45,13 +45,6 @@
*/
static inline void ack_msp_slp_irq(unsigned int irq)
{
- mask_slp_irq(irq);
-
- /*
- * only really necessary for 18, 16-14 and sometimes 3:0 (since
- * these can be edge sensitive) but it doesn't hurt for the others.
- */
-
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
@@ -62,8 +55,7 @@
static struct irq_chip msp_slp_irq_controller = {
.name = "MSP_SLP",
.ack = ack_msp_slp_irq,
- .mask = ack_msp_slp_irq,
- .mask_ack = ack_msp_slp_irq,
+ .mask = mask_msp_slp_irq,
.unmask = unmask_msp_slp_irq,
};
@@ -79,7 +71,7 @@
/* initialize all the IRQ descriptors */
for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
- set_irq_chip_and_handler(i, &msp_slp_irq_controller
+ set_irq_chip_and_handler(i, &msp_slp_irq_controller,
handle_level_irq);
}
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index caf5e9a..fc990cb 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -1,6 +1,4 @@
/*
- * arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
- *
* Copyright (C) 2003 PMC-Sierra Inc.
* Author: Manish Lachwani (lachwani@pmc-sierra.com)
*
diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c
index 4282ac9..0625050 100644
--- a/arch/mips/sibyte/swarm/swarm-i2c.c
+++ b/arch/mips/sibyte/swarm/swarm-i2c.c
@@ -1,6 +1,4 @@
/*
- * arch/mips/sibyte/swarm/swarm-i2c.c
- *
* Broadcom BCM91250A (SWARM), etc. I2C platform setup.
*
* Copyright (c) 2008 Maciej W. Rozycki
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
index ef6ea6e..70f9626 100644
--- a/arch/mips/txx9/generic/mem_tx4927.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/txx9/generic/mem_tx4927.c
- *
* common tx4927 memory interface
*
* Author: MontaVista Software, Inc.
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 3b7d77d..a205e2b 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/mips/txx9/generic/setup.c
- *
* Based on linux/arch/mips/txx9/rbtx4938/setup.c,
* and RBTX49xx patch from CELF patch archive.
*
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index c033ffe..b0c241e 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -512,10 +512,10 @@
rbtx4939_ebusc_setup();
/* always enable ATA0 */
txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
- rbtx4939_update_ioc_pen();
if (txx9_master_clock == 0)
txx9_master_clock = 20000000;
tx4939_setup();
+ rbtx4939_update_ioc_pen();
#ifdef HAVE_RBTX4939_IOSWAB
ioswabw = rbtx4939_ioswabw;
__mem_ioswabw = rbtx4939_mem_ioswabw;
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab8..719f4a5 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
/*
* setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
*
- * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330..6346c59 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
* bcu.c, Bus Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Added support for NEC VR4133.
*/
#include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3..8ba7d04 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
* cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copuright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copuright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Added support for NEC VR4133.
*/
#include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1..22cc6f2 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series GIU platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9f..6d39e22 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
* icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
*/
/*
* Changes:
- * MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ * MontaVista Software Inc. <source@mvista.com>
* - New creation, NEC VR4122 and VR4131 are supported.
* - Added support for NEC VR4111 and VR4121.
*
- * Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Yoichi Yuasa <yuasa@linux-mips.org>
* - Coped with INTASSIGN of NEC VR4133.
*/
#include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c649953..1386e6f 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
/*
* init.c, Common initialization routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc3891..bef0687 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
/*
* Interrupt handing routines for NEC VR4100 series.
*
- * Copyright (C) 2005-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005-2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf7..692b4e8 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
/*
* pmu.c, Power Management Unit routines for NEC VR4100 series.
*
- * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14..ebc5dcf 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series RTC platform device.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6..54eae56 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
/*
* NEC VR4100 series SIU platform device.
*
- * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5..ff84142 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
/*
* type.c, System type for NEC VR4100 series.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297..3982f37 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
/*
* setup.c, Setup for the IBM WorkPad z50.
*
- * Copyright (C) 2002-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2002-2006 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a4..19aecc9 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -59,7 +59,6 @@
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
-#include <linux/mm.h>
#include <asm/io.h>
struct pci_dev;
@@ -70,10 +69,6 @@
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device. */
static inline int pci_controller_num(struct pci_dev *dev)
{
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
index ec057e1..a19f113 100644
--- a/arch/mn10300/include/asm/pgalloc.h
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -51,6 +51,6 @@
}
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 78a3881..58d64f8 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -65,8 +65,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -76,7 +74,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b43..fad6861 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
#define __NR_inotify_init1 333
#define __NR_preadv 334
#define __NR_pwritev 335
+#define __NR_rt_tgsigqueueinfo 336
+#define __NR_perf_counter_open 337
#ifdef __KERNEL__
-#define NR_syscalls 326
+#define NR_syscalls 338
/*
* specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27..e0d2563 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev /* 335 */
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_counter_open
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
index e143339..cf847da 100644
--- a/arch/mn10300/kernel/ptrace.c
+++ b/arch/mn10300/kernel/ptrace.c
@@ -13,7 +13,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 9f7572a..feb2f2e 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -12,7 +12,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index bca5a84..3e52a10 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -13,7 +13,6 @@
#include <linux/syscalls.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
@@ -21,7 +20,6 @@
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/utsname.h>
-#include <linux/syscalls.h>
#include <linux/tty.h>
#include <asm/uaccess.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c..91365ad 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -17,7 +17,6 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
@@ -136,8 +135,7 @@
unsigned long *stack, addr, module_start, module_end;
int i;
- printk(KERN_EMERG "\n"
- KERN_EMERG "Call Trace:");
+ printk(KERN_EMERG "\nCall Trace:");
stack = sp;
i = 0;
@@ -153,7 +151,7 @@
printk("\n");
#else
if ((i % 6) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("[<%08lx>] ", addr);
i++;
#endif
@@ -180,7 +178,7 @@
if (((long) stack & (THREAD_SIZE - 1)) == 0)
break;
if ((i % 8) == 0)
- printk("\n" KERN_EMERG " ");
+ printk(KERN_EMERG " ");
printk("%08lx ", *stack++);
}
@@ -264,8 +262,7 @@
show_stack(current, (unsigned long *) sp);
#if 0
- printk(KERN_EMERG "\n"
- KERN_EMERG "Code: ");
+ printk(KERN_EMERG "\nCode: ");
if (regs->pc < PAGE_OFFSET)
goto bad;
@@ -311,16 +308,14 @@
{
console_verbose();
spin_lock_irq(&die_lock);
- printk(KERN_EMERG "\n"
- KERN_EMERG "%s: %04x\n",
+ printk(KERN_EMERG "\n%s: %04x\n",
str, code & 0xffff);
show_registers(regs);
if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
(regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
printk(KERN_EMERG "Exception in usermode interrupt handler\n");
- printk(KERN_EMERG "\n"
- KERN_EMERG " Please connect to kernel debugger !!\n");
+ printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
asm volatile ("0: bra 0b");
}
@@ -429,9 +424,8 @@
{
console_verbose();
- printk(KERN_EMERG "\n"
- KERN_EMERG "Asynchronous I/O Bus Error\n"
- KERN_EMERG "==========================\n");
+ printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+ printk(KERN_EMERG "==========================\n");
if (bcberr & BCBERR_BEME)
printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcef..f4aa079 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@
_edata = .; /* End of data section */
}
- .data.init_task : { INIT_TASK(THREAD_SIZE); }
+ .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
@@ -107,7 +107,7 @@
__init_end = .;
/* freed after init ends here */
- BSS(4)
+ BSS_SECTION(0, PAGE_SIZE, 4)
_end = . ;
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index a62e1e13..53bb17d 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -20,7 +20,6 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/vt_kern.h> /* For unblank_screen() */
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
index 94c4a43..3001625 100644
--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -17,7 +17,6 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39..06f8d5b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,8 @@
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
+ select HAVE_PERF_COUNTERS
+ select GENERIC_ATOMIC64 if !64BIT
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff9..8bc9e96 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v))))
#define atomic_inc(v) ((void)(__atomic_add_return( 1,(v))))
#define atomic_dec(v) ((void)(__atomic_add_return( -1,(v))))
-#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v) (__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v)))
#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
#define atomic_dec_return(v) (__atomic_add_return( -1,(v)))
@@ -336,7 +336,11 @@
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
#include <asm-generic/atomic-long.h>
diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f0..f7a18f9 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 0000000..dc9e829
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8..9ce66e9 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
#include <asm/types.h>
#include <asm/system.h>
#include <asm/percpu.h>
+
#endif /* __ASSEMBLY__ */
#define KERNEL_STACK_SIZE (4*PAGE_SIZE)
@@ -127,6 +128,8 @@
unsigned long flags;
};
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
/* Thread struct flags. */
#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
#define PARISC_UAC_SIGBUS (1UL << 1)
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c92..d91357b 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@
/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
#define __ldcw(a) ({ \
unsigned __ret; \
- __asm__ __volatile__(__LDCW " 0(%1),%0" \
- : "=r" (__ret) : "r" (a)); \
+ __asm__ __volatile__(__LDCW " 0(%2),%0" \
+ : "=r" (__ret), "+m" (*(a)) : "r" (a)); \
__ret; \
})
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0407959..4ce0edf 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -23,7 +23,7 @@
.flags = 0, \
.cpu = 0, \
.addr_limit = KERNEL_DS, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall \
} \
diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h
index 383b1db..0792490 100644
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -21,7 +21,7 @@
#include <asm-generic/tlb.h>
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
#endif
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4f..8f1a810 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
* N class systems, only one PxTLB inter processor broadcast can be
* active at any one time on the Merced bus. This tlb purge
* synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
*/
extern spinlock_t pa_tlb_lock;
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags)
extern void flush_tlb_all(void);
extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr)
{
+ unsigned long flags;
+
/* For one page, it's not worth testing the split_tlb variable */
mb();
mtsp(vma->vm_mm->context,1);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb(addr);
pitlb(addr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b00..f3d3b8b 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,12 @@
#define __NR_dup3 (__NR_Linux + 312)
#define __NR_pipe2 (__NR_Linux + 313)
#define __NR_inotify_init1 (__NR_Linux + 314)
+#define __NR_preadv (__NR_Linux + 315)
+#define __NR_pwritev (__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317)
+#define __NR_perf_counter_open (__NR_Linux + 318)
-#define __NR_Linux_syscalls (__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls (__NR_perf_counter_open + 1)
#define __IGNORE_select /* newselect */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530e..b6ed34d 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -398,12 +397,13 @@
void clear_user_page_asm(void *page, unsigned long vaddr)
{
+ unsigned long flags;
/* This function is implemented in assembly in pacache.S */
extern void __clear_user_page_asm(void *page, unsigned long vaddr);
- purge_tlb_start();
+ purge_tlb_start(flags);
__clear_user_page_asm(page, vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
#define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -444,20 +444,24 @@
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
+ unsigned long flags;
+
purge_kernel_dcache_page((unsigned long)page);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(page);
- purge_tlb_end();
+ purge_tlb_end(flags);
clear_user_page_asm(page, vaddr);
}
EXPORT_SYMBOL(clear_user_page);
void flush_kernel_dcache_page_addr(void *addr)
{
+ unsigned long flags;
+
flush_kernel_dcache_page_asm(addr);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(addr);
- purge_tlb_end();
+ purge_tlb_end(flags);
}
EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
@@ -490,8 +494,10 @@
if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */
flush_tlb_all();
else {
+ unsigned long flags;
+
mtsp(sid, 1);
- purge_tlb_start();
+ purge_tlb_start(flags);
if (split_tlb) {
while (npages--) {
pdtlb(start);
@@ -504,7 +510,7 @@
start += PAGE_SIZE;
}
}
- purge_tlb_end();
+ purge_tlb_end(flags);
}
}
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index ae3e70cd..e552e54 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -553,7 +553,7 @@
* on most of those machines only handles cache transactions.
*/
extrd,u,*= \pte,_PAGE_NO_CACHE_BIT+32,1,%r0
- depi 1,12,1,\prot
+ depdi 1,12,1,\prot
/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
convert_for_tlb_insert20 \pte
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1..d228d82 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@
static int __init
pat_query_module(ulong pcell_loc, ulong mod_index)
{
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
unsigned long bytecnt;
unsigned long temp; /* 64-bit scratch value */
long status; /* PDC return value status */
struct parisc_device *dev;
+ pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ panic("couldn't allocate memory for PDC_PAT_CELL!");
+
/* return cell module (PA or Processor view) */
status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
- PA_VIEW, &pa_pdc_cell);
+ PA_VIEW, pa_pdc_cell);
if (status != PDC_OK) {
/* no more cell modules or error */
return status;
}
- temp = pa_pdc_cell.cba;
- dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+ temp = pa_pdc_cell->cba;
+ dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
if (!dev) {
return PDC_OK;
}
@@ -203,8 +207,8 @@
/* save generic info returned from the call */
/* REVISIT: who is the consumer of this? not sure yet... */
- dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */
- dev->pmod_loc = pa_pdc_cell.mod_location;
+ dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */
+ dev->pmod_loc = pa_pdc_cell->mod_location;
register_parisc_device(dev); /* advertise device */
@@ -216,14 +220,14 @@
case PAT_ENTITY_PROC:
printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
- pa_pdc_cell.mod[0]);
+ pa_pdc_cell->mod[0]);
break;
case PAT_ENTITY_MEM:
printk(KERN_DEBUG
"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
- pa_pdc_cell.mod[0], pa_pdc_cell.mod[1],
- pa_pdc_cell.mod[2]);
+ pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+ pa_pdc_cell->mod[2]);
break;
case PAT_ENTITY_CA:
printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@
print_ranges:
pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
IO_VIEW, &io_pdc_cell);
- printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
- for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+ printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+ for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
printk(KERN_DEBUG
" PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
- i, pa_pdc_cell.mod[2 + i * 3], /* type */
- pa_pdc_cell.mod[3 + i * 3], /* start */
- pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
+ i, pa_pdc_cell->mod[2 + i * 3], /* type */
+ pa_pdc_cell->mod[3 + i * 3], /* start */
+ pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
printk(KERN_DEBUG
" IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
- i, io_pdc_cell.mod[2 + i * 3], /* type */
- io_pdc_cell.mod[3 + i * 3], /* start */
- io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
+ i, io_pdc_cell->mod[2 + i * 3], /* type */
+ io_pdc_cell->mod[3 + i * 3], /* start */
+ io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
}
printk(KERN_DEBUG "\n");
break;
}
#endif /* DEBUG_PAT */
+
+ kfree(pa_pdc_cell);
+
return PDC_OK;
}
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e..330f536 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@
if (CHECK_IRQ_PER_CPU(irq)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
- cpumask_setall(&irq_desc[irq].affinity);
+ cpumask_setall(irq_desc[irq].affinity);
return -EINVAL;
}
@@ -138,13 +138,13 @@
if (cpu_dest < 0)
return -1;
- cpumask_copy(&irq_desc[irq].affinity, dest);
+ cpumask_copy(irq_desc[irq].affinity, dest);
return 0;
}
#endif
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
.typename = "CPU",
.startup = cpu_startup_irq,
.shutdown = cpu_disable_irq,
@@ -299,7 +299,7 @@
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
{
#ifdef CONFIG_SMP
- cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+ cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@
irq = eirr_to_irq(eirr_val);
#ifdef CONFIG_SMP
- cpumask_copy(&dest, &irq_desc[irq].affinity);
+ cpumask_copy(&dest, irq_desc[irq].affinity);
if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
!cpu_isset(smp_processor_id(), dest)) {
int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index ef5caf2..61ee0ee 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -86,8 +86,12 @@
* the bottom of the table, which has a maximum signed displacement of
* 0x3fff; however, since we're only going forward, this becomes
* 0x1fff, and thus, since each GOT entry is 8 bytes long we can have
- * at most 1023 entries */
-#define MAX_GOTS 1023
+ * at most 1023 entries.
+ * To overcome this 14bit displacement with some kernel modules, we'll
+ * use instead the unusal 16bit displacement method (see reassemble_16a)
+ * which gives us a maximum positive displacement of 0x7fff, and as such
+ * allows us to allocate up to 4095 GOT entries. */
+#define MAX_GOTS 4095
/* three functions to determine where in the module core
* or init pieces the location is */
@@ -145,12 +149,40 @@
/* The reassemble_* functions prepare an immediate value for
insertion into an opcode. pa-risc uses all sorts of weird bitfields
in the instruction to hold the value. */
+static inline int sign_unext(int x, int len)
+{
+ int len_ones;
+
+ len_ones = (1 << len) - 1;
+ return x & len_ones;
+}
+
+static inline int low_sign_unext(int x, int len)
+{
+ int sign, temp;
+
+ sign = (x >> (len-1)) & 1;
+ temp = sign_unext(x, len-1);
+ return (temp << 1) | sign;
+}
+
static inline int reassemble_14(int as14)
{
return (((as14 & 0x1fff) << 1) |
((as14 & 0x2000) >> 13));
}
+static inline int reassemble_16a(int as16)
+{
+ int s, t;
+
+ /* Unusual 16-bit encoding, for wide mode only. */
+ t = (as16 << 1) & 0xffff;
+ s = (as16 & 0x8000);
+ return (t ^ s ^ (s >> 1)) | (s >> 15);
+}
+
+
static inline int reassemble_17(int as17)
{
return (((as17 & 0x10000) >> 16) |
@@ -407,6 +439,7 @@
enum elf_stub_type stub_type, Elf_Addr loc0, unsigned int targetsec)
{
struct stub_entry *stub;
+ int __maybe_unused d;
/* initialize stub_offset to point in front of the section */
if (!me->arch.section[targetsec].stub_offset) {
@@ -460,12 +493,19 @@
*/
switch (stub_type) {
case ELF_STUB_GOT:
- stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */
+ d = get_got(me, value, addend);
+ if (d <= 15) {
+ /* Format 5 */
+ stub->insns[0] = 0x0f6010db; /* ldd 0(%dp),%dp */
+ stub->insns[0] |= low_sign_unext(d, 5) << 16;
+ } else {
+ /* Format 3 */
+ stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp */
+ stub->insns[0] |= reassemble_16a(d);
+ }
stub->insns[1] = 0x53610020; /* ldd 10(%dp),%r1 */
stub->insns[2] = 0xe820d000; /* bve (%r1) */
stub->insns[3] = 0x537b0030; /* ldd 18(%dp),%dp */
-
- stub->insns[0] |= reassemble_14(get_got(me, value, addend) & 0x3fff);
break;
case ELF_STUB_MILLI:
stub->insns[0] = 0x20200000; /* ldil 0,%r1 */
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927ea..c07f618 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
+ unsigned long flags;
+
if (!pte_none(*pte))
printk(KERN_ERR "map_pte_uncached: page already exists\n");
set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
+ unsigned long flags;
pte_t page = *pte;
+
pte_clear(&init_mm, vaddr, pte);
- purge_tlb_start();
+ purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
- purge_tlb_end();
+ purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
pte++;
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386..f7064ab 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c0707..1f3aa8d 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@
* software. The user has to press the button himself. */
printk(KERN_EMERG "System shut down completed.\n"
- KERN_EMERG "Please power this system off now.");
+ "Please power this system off now.");
}
void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7..c8fb61e 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
@@ -121,22 +120,28 @@
if (is_pdc_pat()) {
ulong status;
unsigned long bytecnt;
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
#undef USE_PAT_CPUID
#ifdef USE_PAT_CPUID
struct pdc_pat_cpu_num cpu_info;
#endif
+ pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ panic("couldn't allocate memory for PDC_PAT_CELL!");
+
status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
- dev->mod_index, PA_VIEW, &pa_pdc_cell);
+ dev->mod_index, PA_VIEW, pa_pdc_cell);
BUG_ON(PDC_OK != status);
/* verify it's the same as what do_pat_inventory() found */
- BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
- BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+ BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+ BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
- txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */
+ txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */
+
+ kfree(pa_pdc_cell);
#ifdef USE_PAT_CPUID
/* We need contiguous numbers for cpuid. Firmware's notion
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca..cb71f3d 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c..92a0aca 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@
return ret;
}
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty. We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
- n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
- if (ufdset) {
- unsigned long odd;
-
- if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
- return -EFAULT;
-
- odd = n & 1UL;
- n &= ~1UL;
- while (n) {
- unsigned long h, l;
- __get_user(l, ufdset);
- __get_user(h, ufdset+1);
- ufdset += 2;
- *fdset++ = h << 32 | l;
- n -= 2;
- }
- if (odd)
- __get_user(*fdset, ufdset);
- } else {
- /* Tricky, must clear full unsigned long in the
- * kernel fdset at the end, this makes sure that
- * actually happens.
- */
- memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
- }
- return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
- unsigned long odd;
- n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
- if (!ufdset)
- return;
-
- odd = n & 1UL;
- n &= ~1UL;
- while (n) {
- unsigned long h, l;
- l = *fdset++;
- h = l >> 32;
- __put_user(l, ufdset);
- __put_user(h, ufdset+1);
- ufdset += 2;
- n -= 2;
- }
- if (odd)
- __put_user(*fdset, ufdset);
-}
-
struct msgbuf32 {
int mtype;
char mtext[1];
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01..cf145eb 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,10 @@
ENTRY_SAME(dup3)
ENTRY_SAME(pipe2)
ENTRY_SAME(inotify_init1)
+ ENTRY_COMP(preadv) /* 315 */
+ ENTRY_COMP(pwritev)
+ ENTRY_COMP(rt_tgsigqueueinfo)
+ ENTRY_SAME(perf_counter_open)
/* Nothing yet */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd056..a79c6f9 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@
*/
irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
{
- unsigned long now;
+ unsigned long now, now2;
unsigned long next_tick;
- unsigned long cycles_elapsed, ticks_elapsed;
+ unsigned long cycles_elapsed, ticks_elapsed = 1;
unsigned long cycles_remainder;
unsigned int cpu = smp_processor_id();
struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@
/* Initialize next_tick to the expected tick time. */
next_tick = cpuinfo->it_value;
- /* Get current interval timer.
- * CR16 reads as 64 bits in CPU wide mode.
- * CR16 reads as 32 bits in CPU narrow mode.
- */
+ /* Get current cycle counter (Control Register 16). */
now = mfctl(16);
cycles_elapsed = now - next_tick;
- if ((cycles_elapsed >> 5) < cpt) {
+ if ((cycles_elapsed >> 6) < cpt) {
/* use "cheap" math (add/subtract) instead
* of the more expensive div/mul method
*/
cycles_remainder = cycles_elapsed;
- ticks_elapsed = 1;
while (cycles_remainder > cpt) {
cycles_remainder -= cpt;
ticks_elapsed++;
}
} else {
+ /* TODO: Reduce this to one fdiv op */
cycles_remainder = cycles_elapsed % cpt;
- ticks_elapsed = 1 + cycles_elapsed / cpt;
- }
-
- /* Can we differentiate between "early CR16" (aka Scenario 1) and
- * "long delay" (aka Scenario 3)? I don't think so.
- *
- * We expected timer_interrupt to be delivered at least a few hundred
- * cycles after the IT fires. But it's arbitrary how much time passes
- * before we call it "late". I've picked one second.
- */
- if (unlikely(ticks_elapsed > HZ)) {
- /* Scenario 3: very long delay? bad in any case */
- printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
- " cycles %lX rem %lX "
- " next/now %lX/%lX\n",
- cpu,
- cycles_elapsed, cycles_remainder,
- next_tick, now );
+ ticks_elapsed += cycles_elapsed / cpt;
}
/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@
cpuinfo->it_value = next_tick;
- /* Skip one clocktick on purpose if we are likely to miss next_tick.
- * We want to avoid the new next_tick being less than CR16.
- * If that happened, itimer wouldn't fire until CR16 wrapped.
- * We'll catch the tick we missed on the tick after that.
+ /* Program the IT when to deliver the next interrupt.
+ * Only bottom 32-bits of next_tick are writable in CR16!
*/
- if (!(cycles_remainder >> 13))
- next_tick += cpt;
-
- /* Program the IT when to deliver the next interrupt. */
- /* Only bottom 32-bits of next_tick are written to cr16. */
mtctl(next_tick, 16);
+ /* Skip one clocktick on purpose if we missed next_tick.
+ * The new CR16 must be "later" than current CR16 otherwise
+ * itimer would not fire until CR16 wrapped - e.g 4 seconds
+ * later on a 1Ghz processor. We'll account for the missed
+ * tick on the next timer interrupt.
+ *
+ * "next_tick - now" will always give the difference regardless
+ * if one or the other wrapped. If "now" is "bigger" we'll end up
+ * with a very large unsigned number.
+ */
+ now2 = mfctl(16);
+ if (next_tick - now2 > cpt)
+ mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+ if (unlikely(now2 - now > 0x3000)) /* 12K cycles */
+ printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+ " cyc %lX rem %lX "
+ " next/now %lX/%lX\n",
+ cpu, now2 - now, cycles_elapsed, cycles_remainder,
+ next_tick, now );
+#endif
+
+ /* Can we differentiate between "early CR16" (aka Scenario 1) and
+ * "long delay" (aka Scenario 3)? I don't think so.
+ *
+ * Timer_interrupt will be delivered at least a few hundred cycles
+ * after the IT fires. But it's arbitrary how much time passes
+ * before we call it "late". I've picked one second.
+ *
+ * It's important NO printk's are between reading CR16 and
+ * setting up the next value. May introduce huge variance.
+ */
+ if (unlikely(ticks_elapsed > HZ)) {
+ /* Scenario 3: very long delay? bad in any case */
+ printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+ " cycles %lX rem %lX "
+ " next/now %lX/%lX\n",
+ cpu,
+ cycles_elapsed, cycles_remainder,
+ next_tick, now );
+ }
/* Done mucking with unreliable delivery of interrupts.
* Go do system house keeping.
@@ -173,7 +191,7 @@
/* clock source code */
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
{
return get_cycles();
}
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6..528f0ff 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@
oops_enter();
/* Amuse the user in a SPARC fashion */
- if (err) printk(
-KERN_CRIT " _______________________________ \n"
-KERN_CRIT " < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT " ------------------------------- \n"
-KERN_CRIT " \\ ^__^\n"
-KERN_CRIT " \\ (xx)\\_______\n"
-KERN_CRIT " (__)\\ )\\/\\\n"
-KERN_CRIT " U ||----w |\n"
-KERN_CRIT " || ||\n");
+ if (err) printk(KERN_CRIT
+ " _______________________________ \n"
+ " < Your System ate a SPARC! Gah! >\n"
+ " ------------------------------- \n"
+ " \\ ^__^\n"
+ " (__)\\ )\\/\\\n"
+ " U ||----w |\n"
+ " || ||\n");
/* unlock the pdc lock if necessary */
pdc_emergency_unlock();
@@ -797,7 +796,8 @@
else
printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
code);
- printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+ printk(KERN_CONT "pid=%d command='%s'\n",
+ task_pid_nr(current), current->comm);
show_regs(regs);
#endif
si.si_signo = SIGSEGV;
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d..ae66d31 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
*/
#include <linux/module.h>
#include <linux/types.h>
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909..abf41f4 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@
unaligned_copy:
/* possibly we are aligned on a word, but not on a double... */
- if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+ if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
t2 = src & (sizeof(unsigned int) - 1);
if (unlikely(t2 != 0)) {
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f..3ca1c61 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
* END_DESC
*/
-
+#include <linux/kernel.h>
#include "float.h"
#include "sgl_float.h"
#include "dbl_float.h"
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6..c6afbfc 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb..b0831d9 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@
void free_initmem(void)
{
- unsigned long addr, init_begin, init_end;
-
- printk(KERN_INFO "Freeing unused kernel memory: ");
+ unsigned long addr;
+ unsigned long init_begin = (unsigned long)__init_begin;
+ unsigned long init_end = (unsigned long)__init_end;
#ifdef CONFIG_DEBUG_KERNEL
/* Attempt to catch anyone trying to execute code here
* by filling the page with BRK insns.
- *
- * If we disable interrupts for all CPUs, then IPI stops working.
- * Kinda breaks the global cache flushing.
*/
- local_irq_disable();
-
- memset(__init_begin, 0x00,
- (unsigned long)__init_end - (unsigned long)__init_begin);
-
- flush_data_cache();
- asm volatile("sync" : : );
- flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
- asm volatile("sync" : : );
-
- local_irq_enable();
+ memset((void *)init_begin, 0x00, init_end - init_begin);
+ flush_icache_range(init_begin, init_end);
#endif
/* align __init_begin and __init_end to page size,
ignoring linker script where we might have tried to save RAM */
- init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
- init_end = PAGE_ALIGN((unsigned long)(__init_end));
+ init_begin = PAGE_ALIGN(init_begin);
+ init_end = PAGE_ALIGN(init_end);
for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
- printk("%luk freed\n", (init_end - init_begin) >> 10);
+ printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+ (init_end - init_begin) >> 10);
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedf..d00131c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@
config TRACE_IRQFLAGS_SUPPORT
bool
- depends on PPC64
default y
config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd..3d80c3e 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@
zconf.h
zlib.h
zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fc..49ac36b 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
devsel-speed = <0x00000001>;
min-grant = <0>;
max-latency = <0>;
- /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
- ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
#interrupt-cells = <2>;
#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 224b4f0..4f06dbc 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -410,7 +410,7 @@
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 474ea2f..aabf343 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -394,7 +394,7 @@
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index d4838af..9b1da86 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -424,7 +424,7 @@
bus-range = <0x0 0x0>;
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb01..9e4ce99 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
+ sdhci,1-bit-only;
};
crypto@30000 {
@@ -500,6 +501,10 @@
reg = <0x6>;
device_type = "ethernet-phy";
};
+ tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
mdio@3520 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56..31605ee 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
compatible = "gpio-leds";
green {
gpios = <&GPIO1 0 0>;
- default-state = "on";
+ default-state = "keep";
};
red {
gpios = <&GPIO1 1 0>;
+ default-state = "keep";
};
};
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f09..787635f 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun 9 23:35:36 2009
#
# CONFIG_PPC64 is not set
@@ -41,6 +41,7 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -74,7 +77,17 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -149,11 +167,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -173,10 +186,11 @@
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
CONFIG_440EP=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
@@ -235,9 +249,13 @@
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -271,14 +290,12 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -353,6 +370,7 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,7 +383,6 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@
# CONFIG_XILINX_SYSACE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -529,7 +565,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
#
# SCSI Transports
@@ -541,10 +577,12 @@
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -663,6 +703,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IBM_IIC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -721,6 +782,7 @@
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@
#
# LED drivers
#
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -973,6 +1057,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -993,6 +1078,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1039,6 +1129,12 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1122,7 +1219,7 @@
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1190,24 +1297,27 @@
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1223,6 +1333,8 @@
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 2789397..a2df063 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:05 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:02 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,6 +56,7 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -60,6 +64,7 @@
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -108,7 +113,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -121,9 +125,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -136,6 +147,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -190,6 +205,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -383,7 +401,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -490,6 +512,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -525,7 +548,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -545,14 +570,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -599,6 +627,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -618,8 +647,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -786,13 +817,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -847,6 +882,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -900,24 +936,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -960,6 +981,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1069,6 +1091,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1096,6 +1119,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1115,10 +1142,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1192,6 +1221,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1287,6 +1317,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1312,22 +1343,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index bf0853f..93ebd44 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,25 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Apr 3 10:34:33 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:03 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,21 +33,22 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
@@ -52,11 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -71,19 +78,30 @@
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -93,17 +111,23 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
@@ -116,10 +140,15 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +156,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,14 +173,11 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -179,6 +202,8 @@
CONFIG_KMETER1=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -194,6 +219,8 @@
CONFIG_QUICC_ENGINE=y
# CONFIG_QE_GPIO is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
#
# Kernel options
@@ -212,16 +239,17 @@
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -233,12 +261,17 @@
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -331,7 +364,10 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -342,8 +378,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -362,6 +398,7 @@
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
@@ -431,6 +468,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=y
@@ -445,7 +487,6 @@
# CONFIG_MTD_UBI_DEBUG_MSG is not set
# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
# CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
@@ -459,6 +500,7 @@
# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -505,10 +547,15 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -517,11 +564,12 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_NETDEV_10000 is not set
@@ -531,7 +579,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_WAN=y
CONFIG_HDLC=y
# CONFIG_HDLC_RAW is not set
@@ -543,8 +594,6 @@
#
# X.25/LAPB support is disabled
#
-CONFIG_HDLC_KM=y
-CONFIG_FS_UCC_HDLC=y
# CONFIG_DLCI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
@@ -600,16 +649,18 @@
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_BOOTCOUNT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
@@ -642,20 +693,20 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -677,27 +728,15 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -720,11 +759,16 @@
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -736,9 +780,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -748,6 +795,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -772,10 +824,7 @@
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -796,6 +845,7 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -804,6 +854,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -815,7 +866,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -845,11 +895,13 @@
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -859,11 +911,12 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -883,13 +936,18 @@
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c5c0fe7..ff33a7d 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:04 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -383,7 +401,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -562,10 +587,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -643,14 +665,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -714,6 +739,8 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -735,8 +762,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -924,7 +953,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -938,13 +966,18 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1002,6 +1035,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1056,24 +1090,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1135,6 +1155,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1144,9 +1165,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1235,8 +1256,9 @@
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
@@ -1244,9 +1266,11 @@
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
@@ -1298,6 +1322,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1332,6 +1357,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1351,10 +1380,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1428,6 +1459,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1464,7 +1496,46 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
@@ -1488,6 +1559,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1518,6 +1590,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1529,7 +1604,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1543,16 +1617,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1560,6 +1633,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index af4952f..76237d4 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:05 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -383,7 +401,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -562,10 +587,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -704,14 +726,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -775,6 +800,8 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -796,8 +823,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -985,7 +1014,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -999,13 +1027,18 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1063,6 +1096,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1117,24 +1151,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1196,6 +1216,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1205,9 +1226,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1296,8 +1317,9 @@
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
@@ -1305,9 +1327,11 @@
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
@@ -1359,6 +1383,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1393,6 +1418,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1412,10 +1441,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1489,6 +1520,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1525,7 +1557,46 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
@@ -1549,6 +1620,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1579,6 +1651,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1590,7 +1665,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1604,16 +1678,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1621,6 +1694,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 8c8f660..e0e36a1 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:07 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:06 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -383,7 +401,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -404,6 +426,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -438,7 +461,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -461,10 +486,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -482,6 +503,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -490,6 +512,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -509,7 +532,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -532,14 +554,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -586,6 +611,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -605,11 +631,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -787,13 +815,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -848,6 +880,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +929,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -996,6 +1015,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1023,6 +1043,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1042,10 +1066,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1108,6 +1134,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1165,6 +1192,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1190,22 +1218,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 227dbba..4f27d45 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:08 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -383,7 +401,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -405,6 +427,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -441,7 +464,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -464,10 +489,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -485,6 +506,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -493,6 +515,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -512,7 +535,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -535,14 +557,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -590,6 +615,8 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -609,11 +636,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -804,7 +833,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -817,13 +845,18 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -881,6 +914,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -935,24 +969,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1014,6 +1034,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1023,9 +1044,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1127,6 +1148,8 @@
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
@@ -1136,6 +1159,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1155,10 +1182,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1224,6 +1253,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1325,6 +1355,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1350,22 +1381,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 24ee7fc..648dac0 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:09 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -382,7 +400,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -594,10 +619,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -615,6 +636,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -623,6 +645,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -642,7 +665,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -737,14 +759,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -791,8 +816,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -960,7 +987,6 @@
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -973,13 +999,18 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1026,24 +1057,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1085,6 +1102,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1208,6 +1226,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1242,6 +1261,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1261,10 +1284,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1331,6 +1356,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1429,6 +1455,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1454,22 +1481,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 7f39543..bf6deb8 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:10 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:08 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -382,7 +400,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -546,10 +571,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -567,6 +588,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -575,6 +597,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -594,7 +617,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -617,14 +639,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -671,8 +696,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -840,7 +867,6 @@
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -853,13 +879,18 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -906,24 +937,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -965,6 +982,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1087,6 +1105,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1121,6 +1140,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1140,10 +1163,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1210,6 +1235,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1308,6 +1334,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1333,22 +1360,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 1cd1fca..3236c47 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:11 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:09 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -382,7 +400,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -457,14 +482,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -527,6 +555,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -548,8 +577,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -724,13 +755,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -785,6 +820,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -833,23 +869,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -933,6 +955,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -960,6 +983,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -979,10 +1006,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1045,6 +1074,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1100,6 +1130,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1125,22 +1156,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index ce51773..8c5299d 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:10 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -135,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -189,6 +204,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -364,6 +381,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -381,7 +399,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -485,6 +507,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -519,7 +542,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -542,10 +567,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -563,6 +584,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -571,6 +593,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -590,7 +613,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -613,14 +635,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -667,6 +692,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -686,11 +712,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -868,13 +896,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -929,6 +961,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -977,23 +1010,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1077,6 +1096,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1104,6 +1124,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1123,10 +1147,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1190,6 +1216,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1247,6 +1274,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1272,22 +1300,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7f1d138..ff31667 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:13 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:12 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,12 +57,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -108,7 +113,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -121,9 +125,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -136,6 +147,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -190,6 +205,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -383,7 +401,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -498,6 +520,7 @@
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -533,7 +556,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -553,14 +578,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -607,11 +635,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -777,7 +807,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -791,13 +820,18 @@
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -865,23 +899,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -990,6 +1011,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1009,10 +1034,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1086,6 +1113,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1145,6 +1173,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1170,22 +1199,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index bf636fd..e285ec0 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:11 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -108,7 +113,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -121,8 +125,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -136,6 +147,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -190,6 +205,7 @@
# CONFIG_MPC837x_RDB is not set
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -382,7 +400,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -460,10 +485,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -481,6 +502,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -489,6 +511,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -508,7 +531,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -592,14 +614,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -646,6 +671,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -665,8 +691,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -844,13 +872,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -905,6 +937,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -953,23 +986,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1026,6 +1045,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1045,10 +1068,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1111,6 +1136,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1170,6 +1196,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1193,22 +1220,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index fe6454e..1ab3e4c 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:14 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -108,7 +113,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -121,8 +125,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -136,6 +147,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -190,6 +205,7 @@
CONFIG_MPC837x_RDB=y
# CONFIG_SBC834x is not set
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +377,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -377,7 +395,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -398,6 +420,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -433,7 +456,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -456,10 +481,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -476,6 +497,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -484,6 +506,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -503,7 +526,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -598,14 +620,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -652,6 +677,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -671,8 +697,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -842,13 +870,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -903,6 +935,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -956,24 +989,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1011,7 +1029,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1028,10 +1046,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1057,6 +1076,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1141,6 +1161,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1160,10 +1184,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1226,6 +1252,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1262,7 +1289,46 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
@@ -1285,6 +1351,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1308,22 +1375,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index fe08f67..a592b5e 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:15 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,12 +56,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -107,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -120,8 +124,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -134,6 +145,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -146,7 +161,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -188,6 +203,7 @@
# CONFIG_MPC837x_RDB is not set
CONFIG_SBC834x=y
# CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
@@ -232,6 +248,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +269,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -363,6 +380,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -380,7 +398,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -401,6 +423,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -435,7 +458,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -455,14 +480,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -509,6 +537,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -528,8 +557,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -688,13 +719,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -749,6 +784,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -797,23 +833,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -851,6 +873,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -862,10 +888,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -928,6 +956,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -971,6 +1000,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -994,22 +1024,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 09146dd..ff04e10 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:14 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -108,7 +111,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -121,8 +123,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -136,6 +145,11 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -143,7 +157,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -176,6 +190,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -224,6 +239,7 @@
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +362,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +380,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -466,6 +487,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,7 +542,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -560,6 +581,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
@@ -567,6 +589,7 @@
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
@@ -654,6 +677,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -710,22 +738,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -777,6 +790,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -797,10 +814,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -916,6 +935,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -946,6 +966,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -958,7 +981,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -972,16 +994,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -990,9 +1011,13 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 7b43be7..fb10cc8 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:15 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -111,7 +114,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -124,8 +126,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -138,6 +147,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -145,7 +158,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -178,6 +191,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -226,6 +240,7 @@
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -244,9 +259,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +363,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,7 +381,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -387,6 +407,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -423,7 +444,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -462,9 +482,11 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
@@ -555,6 +577,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -590,22 +617,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -657,6 +669,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -676,10 +692,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -794,6 +812,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -824,6 +843,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -835,7 +857,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -849,16 +870,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -866,6 +886,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 62adb71..5c8ce69 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:16 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -112,7 +115,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -125,9 +127,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -141,6 +150,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -148,7 +161,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -181,6 +194,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +375,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -377,7 +393,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -400,6 +420,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -431,6 +452,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -450,14 +472,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -504,6 +529,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
@@ -527,8 +553,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -646,6 +674,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -707,22 +740,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -779,6 +797,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -798,10 +820,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -916,6 +940,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -946,6 +971,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -957,7 +985,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -971,16 +998,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -988,6 +1014,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 41209e3..158e63e 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:17 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -111,7 +114,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -124,9 +126,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -139,6 +148,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -179,6 +192,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -227,6 +241,7 @@
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -245,9 +260,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -358,6 +373,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -375,7 +391,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -397,6 +417,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -428,6 +449,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -502,14 +524,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -556,6 +581,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -575,8 +601,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -698,6 +726,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -737,22 +770,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -809,6 +827,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -828,10 +850,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -946,6 +970,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -976,6 +1001,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -987,7 +1015,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1001,16 +1028,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1018,6 +1044,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 6c36c9c..2726fca1 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:19 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:18 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -110,7 +113,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -123,8 +125,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -137,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -177,6 +190,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -354,6 +369,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -371,7 +387,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -391,6 +411,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -422,6 +443,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -441,14 +463,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -495,6 +520,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -514,8 +540,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -637,6 +665,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -676,22 +709,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -721,6 +739,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -732,10 +754,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -838,6 +862,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -861,22 +886,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 4aaf1a6..b0c4698 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:20 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -111,7 +114,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -124,7 +126,14 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -137,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -177,6 +190,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@
CONFIG_BINFMT_MISC=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +361,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +379,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -385,6 +405,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -421,7 +442,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -460,9 +480,11 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
@@ -551,6 +573,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -586,22 +613,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -690,6 +702,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -701,10 +717,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -819,6 +837,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -848,6 +867,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +881,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +894,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -890,6 +910,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 7998458..04c85da 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:21 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -109,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -122,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -137,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -149,7 +162,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -182,6 +195,7 @@
# CONFIG_MPC85xx_DS is not set
CONFIG_SOCRATES=y
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -357,6 +372,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -373,6 +389,7 @@
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -382,7 +399,11 @@
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -499,6 +520,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -535,7 +557,9 @@
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -558,10 +582,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -588,14 +608,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -643,6 +666,8 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -662,8 +687,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -733,6 +760,7 @@
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@@ -746,6 +774,7 @@
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -862,7 +891,6 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -875,12 +903,18 @@
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_MPC8xxx is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -938,6 +972,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -973,24 +1008,10 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1110,7 +1131,7 @@
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
@@ -1124,10 +1145,11 @@
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1153,6 +1175,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1162,9 +1185,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1284,6 +1307,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1318,6 +1342,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1337,10 +1365,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1449,7 +1479,46 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
@@ -1473,6 +1542,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1498,22 +1568,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index bd1bfcd..e7e81d6 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:22 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:20 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -112,7 +115,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -125,9 +127,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -142,6 +151,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -153,7 +166,7 @@
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -186,6 +199,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -425,6 +440,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -442,7 +458,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -466,6 +486,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
@@ -507,7 +528,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -581,10 +604,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
@@ -602,6 +621,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -610,6 +630,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -631,7 +652,6 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -654,14 +674,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -708,6 +731,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
# CONFIG_FS_ENET is not set
@@ -729,8 +753,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -802,12 +828,13 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -821,6 +848,7 @@
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -911,6 +939,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
@@ -941,13 +970,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -1027,6 +1060,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1060,23 +1094,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1143,6 +1163,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1162,10 +1186,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1316,6 +1342,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1346,6 +1373,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1358,7 +1388,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1372,16 +1401,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1389,6 +1417,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 7676001..2c40752 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:21 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -109,7 +112,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -122,9 +124,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -137,6 +146,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -177,6 +190,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
# CONFIG_TQM8541 is not set
@@ -225,6 +239,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -243,9 +258,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -353,6 +368,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -370,7 +386,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -471,6 +491,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -505,7 +526,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -580,14 +603,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -650,6 +676,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -671,8 +698,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -850,13 +879,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -911,6 +944,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -945,23 +979,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1018,6 +1038,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1037,10 +1061,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1167,6 +1193,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1192,22 +1219,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 52fafc0..845731d 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:22 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -110,7 +113,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -123,9 +125,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -139,6 +148,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -179,6 +192,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_TQM8541=y
@@ -228,6 +242,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -373,7 +389,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -584,14 +607,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1052,6 +1073,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1071,10 +1096,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1226,22 +1254,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 8b4faae7..4f228a9 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:23 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -56,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -111,7 +114,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -124,9 +126,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -140,6 +149,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -152,7 +165,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -185,6 +198,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,8 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
@@ -368,6 +385,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -497,6 +515,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -531,7 +550,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -551,14 +572,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -605,6 +629,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -624,8 +649,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -801,13 +828,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -862,6 +893,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +928,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -977,6 +995,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1004,6 +1023,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1015,10 +1038,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1145,6 +1170,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1175,6 +1201,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1187,7 +1216,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1201,16 +1229,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1218,6 +1245,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 1703609..9196724 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:25 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:24 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -110,7 +113,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -123,9 +125,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -139,6 +148,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -179,6 +192,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -373,7 +389,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -584,14 +607,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1052,6 +1073,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1071,10 +1096,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1226,22 +1254,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index f41cc24..2e49a6e 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:26 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -110,7 +113,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -123,9 +125,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -139,6 +148,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -179,6 +192,7 @@
# CONFIG_MPC85xx_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -373,7 +389,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -584,14 +607,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1052,6 +1073,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1071,10 +1096,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1226,22 +1254,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 2552cbe..1025da2 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Thu Jun 11 11:25:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -35,15 +35,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -64,6 +65,7 @@
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -114,7 +116,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -127,9 +128,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -144,6 +152,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -157,7 +169,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -239,6 +251,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +300,8 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
@@ -404,6 +419,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -540,6 +556,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -575,7 +592,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -599,10 +618,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
@@ -619,6 +634,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -627,6 +643,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -646,7 +663,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -730,14 +746,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -784,6 +803,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -803,8 +823,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -986,13 +1008,17 @@
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -1072,6 +1098,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1126,23 +1153,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1187,7 +1200,7 @@
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
@@ -1201,10 +1214,11 @@
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1230,6 +1244,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
@@ -1325,7 +1340,7 @@
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
@@ -1352,8 +1367,6 @@
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1398,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1425,6 +1439,10 @@
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1444,11 +1462,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1629,6 +1648,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1659,6 +1679,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1671,7 +1694,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1685,16 +1707,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,6 +1723,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index b6a23af..527ad1a 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:31 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:31 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
@@ -32,16 +34,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -112,9 +117,7 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -127,8 +130,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -143,6 +153,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -156,7 +170,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -216,7 +230,7 @@
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
@@ -235,6 +249,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -285,14 +300,32 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
-CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -353,8 +386,8 @@
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -380,174 +413,26 @@
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
-CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
@@ -560,12 +445,7 @@
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -580,9 +460,9 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -672,6 +552,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -707,9 +588,60 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
@@ -731,10 +663,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -751,6 +679,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -759,6 +688,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -778,7 +708,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -791,6 +720,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
@@ -842,6 +772,7 @@
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
@@ -862,14 +793,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -916,6 +850,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -935,8 +870,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -963,22 +900,8 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
@@ -990,7 +913,6 @@
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
@@ -1010,7 +932,7 @@
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
@@ -1058,6 +980,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1080,6 +1003,14 @@
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -1143,18 +1074,21 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
@@ -1229,6 +1163,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1284,24 +1219,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1346,7 +1266,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1363,10 +1283,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1392,6 +1313,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1401,6 +1323,8 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1475,7 +1399,6 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
#
@@ -1521,6 +1444,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1548,6 +1472,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1569,10 +1497,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1589,8 +1519,11 @@
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
@@ -1598,8 +1531,8 @@
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
@@ -1649,6 +1582,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1723,13 +1657,13 @@
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
@@ -1738,6 +1672,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1750,75 +1685,24 @@
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1826,15 +1710,9 @@
# Security options
#
# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -1854,11 +1732,11 @@
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
@@ -1873,53 +1751,52 @@
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a66910e..cd338d4 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:29 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:29 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
@@ -32,16 +34,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -91,7 +96,11 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,7 +118,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -122,8 +130,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -138,6 +153,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -151,7 +170,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -168,7 +187,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
@@ -212,7 +230,7 @@
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
@@ -231,6 +249,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +271,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -281,13 +300,32 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -393,6 +431,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -421,7 +460,9 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -511,6 +552,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -546,9 +588,60 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
@@ -570,10 +663,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -590,6 +679,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -598,6 +688,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -617,7 +708,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -630,6 +720,7 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
@@ -647,14 +738,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -701,6 +795,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -720,8 +815,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -748,6 +845,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -827,6 +925,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -849,6 +948,14 @@
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -912,13 +1019,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -997,6 +1108,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1052,24 +1164,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1114,7 +1211,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1131,10 +1228,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,6 +1258,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1169,6 +1268,8 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1288,6 +1389,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1315,6 +1417,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1336,10 +1442,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1419,6 +1527,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1508,6 +1617,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1531,23 +1641,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index c6a7fc8..ba47883 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:30 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:30 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
@@ -32,16 +34,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -114,7 +119,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -127,8 +131,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -143,6 +154,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -235,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +272,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -285,6 +301,8 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
@@ -510,6 +528,7 @@
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
@@ -566,7 +585,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -678,6 +701,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -713,7 +737,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -737,10 +763,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -757,6 +779,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -765,6 +788,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -784,7 +808,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -868,14 +891,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -922,6 +948,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -941,8 +968,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -1149,13 +1178,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -1235,6 +1268,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1290,24 +1324,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1352,7 +1371,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1369,10 +1388,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1398,6 +1418,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1407,6 +1428,8 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1527,6 +1550,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1554,6 +1578,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1575,10 +1603,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1645,6 +1675,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1734,6 +1765,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1759,10 +1791,14 @@
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1774,7 +1810,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1788,17 +1823,16 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1806,6 +1840,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1829,7 +1866,6 @@
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index cfd2efc..a61f183 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:27 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -53,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -109,7 +114,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -122,9 +126,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -138,6 +149,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -230,6 +245,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -250,9 +266,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -279,6 +295,8 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
@@ -381,6 +399,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -398,7 +417,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -549,7 +572,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -620,10 +645,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -640,6 +661,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -648,6 +670,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -667,7 +690,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -751,14 +773,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -792,6 +817,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -959,13 +985,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -993,23 +1023,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1106,6 +1122,11 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
@@ -1130,6 +1151,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
@@ -1160,6 +1182,7 @@
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -1251,6 +1274,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1278,6 +1302,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1297,12 +1325,15 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -1464,6 +1495,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1494,6 +1526,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1506,7 +1541,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1520,16 +1554,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1537,6 +1570,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0bee3e3..7016ce7 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:28 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
@@ -32,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -54,11 +57,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -113,7 +118,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -126,9 +130,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -143,6 +154,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -234,7 +249,9 @@
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +273,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -401,6 +418,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -419,7 +437,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -444,6 +466,7 @@
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -479,7 +502,9 @@
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -503,10 +528,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
@@ -524,6 +545,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -532,6 +554,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -551,7 +574,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -635,14 +657,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -689,6 +714,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -708,8 +734,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -909,13 +937,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -943,76 +975,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1052,6 +1017,11 @@
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
@@ -1078,6 +1048,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
@@ -1108,6 +1079,7 @@
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -1152,7 +1124,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1169,10 +1141,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1198,6 +1171,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1207,9 +1181,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1329,6 +1303,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1356,6 +1331,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1375,11 +1354,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1454,6 +1434,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
@@ -1555,6 +1536,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1585,6 +1567,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1597,7 +1582,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1611,16 +1595,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1628,6 +1611,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index c30a0c7..f5ca2e0 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:27 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:26 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
@@ -32,16 +34,17 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -55,11 +58,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -113,7 +118,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -126,8 +130,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -142,6 +153,11 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -155,7 +171,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -234,6 +250,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -284,6 +301,8 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
@@ -508,6 +527,7 @@
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
@@ -564,7 +584,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -675,6 +699,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -709,7 +734,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -736,6 +763,7 @@
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
@@ -747,14 +775,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -801,6 +832,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -820,8 +852,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -1018,13 +1052,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1079,6 +1117,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1127,23 +1166,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1207,6 +1232,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1236,8 +1265,8 @@
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
@@ -1245,6 +1274,8 @@
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1318,6 +1349,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1409,6 +1441,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1434,10 +1467,14 @@
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1449,7 +1486,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1463,17 +1499,16 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1482,9 +1517,13 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1505,7 +1544,6 @@
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 74f7f7c..aece6bb 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:50 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:47 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
@@ -27,15 +27,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -49,12 +50,14 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -101,7 +104,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -114,8 +116,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -129,13 +138,18 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -220,6 +234,7 @@
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +254,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +295,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -336,6 +352,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -353,7 +370,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -452,6 +473,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
@@ -469,7 +491,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -508,6 +529,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
@@ -556,11 +578,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -622,6 +644,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -644,22 +671,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -685,6 +697,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -696,12 +712,15 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -818,6 +837,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -846,6 +866,9 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -857,7 +880,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -870,16 +892,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -888,9 +909,13 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 9ffa8de..8105360 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:51 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:48 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -54,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -118,7 +123,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -131,16 +135,23 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
@@ -150,6 +161,11 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -162,7 +178,7 @@
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -258,6 +274,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -279,9 +296,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -331,6 +348,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -583,6 +601,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
@@ -663,7 +682,11 @@
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -772,6 +795,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -816,10 +840,6 @@
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
@@ -836,6 +856,7 @@
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
@@ -854,6 +875,7 @@
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
@@ -875,7 +897,6 @@
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -903,14 +924,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -957,6 +981,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -976,6 +1001,7 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
@@ -1177,13 +1203,17 @@
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1238,6 +1268,7 @@
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1266,7 +1297,6 @@
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
@@ -1289,23 +1319,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1354,6 +1370,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1362,9 +1379,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1545,6 +1562,10 @@
#
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1563,11 +1584,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1652,6 +1674,7 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1764,6 +1787,7 @@
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1794,6 +1818,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
@@ -1807,7 +1834,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
@@ -1824,30 +1850,34 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1869,7 +1899,6 @@
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 04915c3..0aa5b43 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:52 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -99,7 +104,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -112,8 +116,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -127,6 +138,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -134,7 +149,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -213,6 +228,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,9 +244,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -300,6 +316,7 @@
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
@@ -380,7 +397,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -485,6 +506,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,13 +542,17 @@
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -573,6 +599,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
@@ -594,8 +621,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
@@ -685,6 +714,10 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -728,22 +761,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -771,6 +789,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -787,9 +809,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -935,6 +958,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -960,6 +984,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -971,7 +998,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -985,22 +1011,23 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c2a4395..2c292e2 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:53 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
@@ -27,15 +27,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -49,11 +50,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -100,7 +103,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -113,8 +115,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -128,13 +137,17 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -220,6 +233,7 @@
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +253,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +294,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -336,6 +351,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -353,7 +369,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -452,6 +472,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
@@ -469,7 +490,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -508,6 +528,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
@@ -579,6 +600,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -602,22 +628,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -642,6 +653,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -653,12 +668,15 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -775,6 +793,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -803,6 +822,9 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -814,7 +836,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,16 +848,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -844,6 +864,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index a4053ab..45671e7 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:54 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:50 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +55,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -114,7 +119,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -127,9 +131,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -143,6 +154,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -155,7 +170,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -237,6 +252,7 @@
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -257,9 +273,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -480,6 +496,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -498,7 +515,11 @@
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -647,7 +668,9 @@
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -670,10 +693,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -691,6 +710,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -699,6 +719,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -718,7 +739,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -802,14 +822,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -846,6 +869,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -865,8 +889,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -1074,13 +1100,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1135,6 +1165,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1169,23 +1200,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1245,6 +1262,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1254,9 +1272,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1423,6 +1441,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1450,6 +1469,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1469,14 +1492,16 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1548,6 +1573,7 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
@@ -1578,7 +1604,7 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
@@ -1645,6 +1671,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1675,6 +1702,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1686,7 +1716,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1700,16 +1729,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1717,6 +1745,8 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 31e1df6..e9491c1 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:51 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,6 +56,7 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -60,6 +64,7 @@
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -105,7 +110,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -119,8 +123,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -134,6 +145,11 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -141,7 +157,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -225,6 +241,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +257,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -313,6 +330,7 @@
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
@@ -374,7 +392,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -484,6 +506,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -523,13 +546,17 @@
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -577,6 +604,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
@@ -654,6 +682,10 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -697,22 +729,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -740,6 +757,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -757,9 +778,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -916,6 +938,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -941,6 +964,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -952,7 +978,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -966,16 +991,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -983,9 +1007,12 @@
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 24fa9079..1ae85a3 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:52 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
@@ -27,15 +27,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -48,11 +49,13 @@
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -102,7 +105,6 @@
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
@@ -115,7 +117,14 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -129,6 +138,11 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -136,7 +150,7 @@
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -222,6 +236,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -241,9 +256,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -342,6 +358,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -359,7 +376,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -463,6 +484,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -492,7 +514,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -531,6 +552,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
# CONFIG_FS_ENET_HAS_FEC is not set
@@ -602,6 +624,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -625,22 +652,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -665,6 +677,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -687,10 +703,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -823,6 +841,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -844,24 +863,14 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 642ab67..f23428c 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:56 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:53 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +55,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -106,7 +111,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -119,9 +123,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -134,6 +145,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -220,6 +235,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +256,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +364,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,7 +382,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -385,6 +406,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -416,6 +438,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -438,10 +461,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -458,6 +477,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -466,6 +486,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -485,7 +506,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -568,14 +588,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -642,6 +665,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -663,7 +687,9 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -785,6 +811,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -824,22 +855,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -896,6 +912,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -915,11 +935,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1038,6 +1059,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1063,22 +1085,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index cb966ca..02716f7 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:57 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:54 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -99,7 +104,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -112,9 +116,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -128,6 +139,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -135,7 +150,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -216,6 +231,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -231,9 +247,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -303,6 +319,7 @@
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
@@ -383,7 +400,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -489,6 +510,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -524,13 +546,17 @@
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -577,6 +603,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
@@ -598,8 +625,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
@@ -671,12 +700,13 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -741,6 +771,10 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -784,22 +818,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -828,6 +847,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -847,9 +870,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -998,6 +1022,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1028,6 +1053,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1039,7 +1067,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1053,22 +1080,23 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 433c303..4a96cb6 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:58 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,6 +57,7 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -61,6 +65,7 @@
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -110,7 +115,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -123,8 +127,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@@ -138,6 +149,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -192,6 +207,7 @@
CONFIG_MPC837x_RDB=y
CONFIG_SBC834x=y
CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
CONFIG_PPC_MPC831x=y
CONFIG_PPC_MPC832x=y
CONFIG_PPC_MPC834x=y
@@ -241,6 +257,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -261,9 +278,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -374,6 +391,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -391,7 +409,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -507,6 +529,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -542,7 +565,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -565,10 +590,6 @@
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -586,6 +607,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -594,6 +616,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -613,7 +636,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -697,14 +719,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -751,6 +776,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -770,11 +796,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -965,13 +993,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -1050,6 +1082,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1104,24 +1137,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1159,7 +1177,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1176,10 +1194,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1205,6 +1224,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1291,6 +1311,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1310,10 +1334,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1377,6 +1403,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1413,7 +1440,46 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@@ -1438,6 +1504,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1461,22 +1528,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c162724..ada5958 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:40:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -34,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -116,7 +119,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -129,9 +131,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -146,6 +155,11 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -158,7 +172,7 @@
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -191,6 +205,7 @@
CONFIG_MPC85xx_DS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
@@ -241,7 +256,9 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -260,9 +277,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -296,7 +313,8 @@
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
@@ -406,6 +424,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -424,7 +443,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -450,6 +473,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -485,7 +509,9 @@
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -509,10 +535,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
@@ -530,6 +552,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -538,6 +561,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -557,7 +581,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -641,14 +664,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -695,6 +721,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
@@ -718,11 +745,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -897,6 +926,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -927,13 +957,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -987,76 +1021,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1096,6 +1063,11 @@
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
@@ -1122,6 +1094,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
@@ -1152,6 +1125,7 @@
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -1196,7 +1170,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1213,10 +1187,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1242,6 +1217,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1251,9 +1227,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1352,8 +1328,6 @@
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1359,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1425,6 +1400,10 @@
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1445,11 +1424,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1524,6 +1504,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
@@ -1628,6 +1609,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1658,6 +1640,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1670,7 +1655,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1684,16 +1668,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,9 +1685,13 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 1aa1c50..db082ce 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:41:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:56 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
@@ -35,15 +35,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -58,11 +59,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -117,7 +120,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -130,9 +132,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -148,6 +157,11 @@
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -161,7 +175,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -194,6 +208,7 @@
CONFIG_MPC85xx_DS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
@@ -244,7 +259,9 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -264,9 +281,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -300,7 +317,8 @@
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
@@ -410,6 +428,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -428,7 +447,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -454,6 +477,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -489,7 +513,9 @@
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -513,10 +539,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
@@ -534,6 +556,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -542,6 +565,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -561,7 +585,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -645,14 +668,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -699,6 +725,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
@@ -722,11 +749,13 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -901,6 +930,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
@@ -931,13 +961,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -991,76 +1025,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1100,6 +1067,11 @@
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
@@ -1126,6 +1098,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
@@ -1156,6 +1129,7 @@
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -1200,7 +1174,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1217,10 +1191,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1246,6 +1221,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1255,9 +1231,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1356,8 +1332,6 @@
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1389,6 +1363,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1429,6 +1404,10 @@
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1449,11 +1428,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1528,6 +1508,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
@@ -1632,6 +1613,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1662,6 +1644,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1674,7 +1659,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1688,16 +1672,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1706,9 +1689,13 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3add6f6..6809b61 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:57 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
@@ -27,15 +27,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -48,11 +49,13 @@
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -98,7 +101,6 @@
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
@@ -111,8 +113,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -126,6 +135,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -133,7 +146,7 @@
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -219,6 +232,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -238,9 +252,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +292,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -339,6 +354,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -356,7 +372,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -374,6 +394,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -407,7 +428,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -446,6 +466,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FEC=y
@@ -453,6 +474,7 @@
CONFIG_NETDEV_1000=y
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
#
@@ -496,11 +518,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -562,6 +584,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -597,22 +624,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -664,6 +676,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -685,10 +701,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -808,6 +826,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -831,22 +850,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5bb1b8e..0e8684a 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,26 +1,28 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:58 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC32=y
@@ -32,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -55,11 +58,13 @@
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -114,7 +119,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -127,9 +131,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -144,6 +155,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -157,7 +172,7 @@
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -236,7 +251,9 @@
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +275,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -403,6 +420,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -421,7 +439,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -447,6 +469,7 @@
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -482,7 +505,9 @@
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -506,10 +531,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
@@ -527,6 +548,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -535,6 +557,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -554,7 +577,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -638,14 +660,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -692,6 +717,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -711,8 +737,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -913,13 +941,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -973,76 +1005,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1082,6 +1047,11 @@
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
@@ -1108,6 +1078,7 @@
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
@@ -1138,6 +1109,7 @@
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
@@ -1182,7 +1154,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
@@ -1199,10 +1171,11 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1228,6 +1201,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1237,9 +1211,9 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1360,6 +1334,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1387,6 +1362,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1406,11 +1385,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1485,6 +1465,7 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
@@ -1586,6 +1567,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1616,6 +1598,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1628,7 +1613,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1642,16 +1626,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1659,6 +1642,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 42e64eb..dbe8e869 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:01 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:59 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
@@ -27,15 +27,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -49,11 +50,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -100,7 +103,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -113,8 +115,15 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -128,13 +137,17 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -227,6 +240,7 @@
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -246,9 +260,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +301,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -343,6 +358,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -360,7 +376,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -463,6 +483,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
@@ -480,7 +501,6 @@
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -519,6 +539,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
@@ -590,6 +611,11 @@
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -613,22 +639,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -653,6 +664,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -664,12 +679,15 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@@ -786,6 +804,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -814,6 +833,9 @@
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -825,7 +847,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -838,16 +859,15 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -855,6 +875,9 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 129d808..ff96bb4 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:02 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:00 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -103,7 +108,6 @@
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -116,9 +120,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -132,6 +143,10 @@
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -139,7 +154,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -219,6 +234,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -234,9 +250,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -307,6 +323,7 @@
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
@@ -387,7 +404,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -493,6 +514,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -518,6 +540,7 @@
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -583,13 +606,17 @@
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -636,6 +663,7 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
@@ -657,8 +685,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
@@ -730,12 +760,13 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -802,6 +833,10 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
@@ -845,22 +880,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -903,8 +923,9 @@
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -912,9 +933,11 @@
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
@@ -939,6 +962,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -958,9 +985,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1110,6 +1138,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1140,6 +1169,9 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1151,7 +1183,6 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1165,22 +1196,23 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e9f287f..1293c46 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:03 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -54,11 +57,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -114,7 +119,6 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -127,9 +131,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -142,6 +153,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -149,7 +164,7 @@
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -228,6 +243,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -249,9 +265,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -296,6 +312,7 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
@@ -357,6 +374,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -374,7 +392,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -479,6 +501,7 @@
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -514,7 +537,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -591,10 +616,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -611,6 +632,7 @@
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -619,6 +641,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -638,7 +661,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -721,7 +743,11 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -730,7 +756,6 @@
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -797,6 +822,7 @@
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
@@ -818,6 +844,7 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
@@ -1007,13 +1034,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -1068,6 +1099,7 @@
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -1102,23 +1134,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1163,6 +1181,7 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
@@ -1180,9 +1199,14 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1207,6 +1231,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1215,6 +1240,8 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1322,6 +1349,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1349,6 +1377,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1368,11 +1400,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1469,7 +1502,46 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
@@ -1494,6 +1566,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1519,22 +1592,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index bd4a8d4..28384dc 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,25 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
@@ -52,11 +55,13 @@
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -101,7 +106,6 @@
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -114,9 +118,16 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
@@ -129,6 +140,10 @@
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -222,6 +237,7 @@
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -347,6 +363,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -364,7 +381,11 @@
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -501,7 +522,9 @@
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -579,10 +602,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -599,6 +618,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -607,6 +627,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
@@ -626,7 +647,6 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -660,14 +680,17 @@
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -695,8 +718,10 @@
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -845,13 +870,17 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -879,23 +908,9 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -937,6 +952,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -946,6 +962,8 @@
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1064,6 +1082,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1091,6 +1110,10 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1110,7 +1133,6 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
@@ -1119,6 +1141,8 @@
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1273,6 +1297,7 @@
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
@@ -1298,22 +1323,11 @@
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff79874..7685ffd 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#define IMAP_ADDR (get_immrbase())
-
#define CPM_PIN_INPUT 0
#define CPM_PIN_OUTPUT 1
#define CPM_PIN_PRIMARY 0
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41..52e4d54 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@
udelay(delay); \
else \
cpu_relax(); \
+ if (!__ret) \
+ __ret = (condition); \
__ret; \
})
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887..b44aaab 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
size, direction);
}
@@ -320,7 +322,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle,
0, size, direction);
}
@@ -331,7 +335,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_cpu)
+ dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_device)
+ dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle,
offset, size, direction);
}
@@ -362,7 +372,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
size, direction);
}
#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f..a74c4ee 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
#ifdef __KERNEL__
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/highmem.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
@@ -62,6 +60,9 @@
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+ pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@@ -79,62 +80,11 @@
kunmap_high(page);
}
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@
return pte_page(*pte);
}
+
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8e..8b505ea 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) mtmsr(flags)
+#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@
#endif
}
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@
#endif
}
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@@ -110,12 +110,12 @@
#endif
}
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags) local_irq_save_ptr(&flags)
-#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags) ((flags) = mfmsr())
+#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
-#define hard_irq_enable() local_irq_enable()
-#define hard_irq_disable() local_irq_disable()
+#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index dfdf13c..fddc3ed 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -34,7 +34,7 @@
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
/* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1<<31)
+#define KVM_PAGES_PER_HPAGE (1UL << 31)
struct kvm;
struct kvm_run;
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e1..0ea0639 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@
extern unsigned long perf_misc_flags(struct pt_regs *regs);
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+#define PERF_COUNTER_INDEX_OFFSET 1
+
/*
* Only override the default definitions in include/linux/perf_counter.h
* if we have hardware PMU support.
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 0815eb4..c9500d6 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -16,7 +16,7 @@
*/
/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */
#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
+#define __pmd_free_tlb(tlb,x,a) do { } while (0)
/* #define pgd_populate(mm, pmd, pte) BUG() */
#ifndef CONFIG_BOOKE
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index afda2bd..e6f069c 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -118,11 +118,11 @@
kmem_cache_free(pgtable_cache[cachenum], p);
}
-#define __pmd_free_tlb(tlb, pmd) \
+#define __pmd_free_tlb(tlb, pmd,addr) \
pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
#ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud) \
+#define __pud_free_tlb(tlb, pud, addr) \
pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
#endif /* CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 5d84802..1730e5e 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -38,14 +38,14 @@
extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
#ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage) \
+#define __pte_free_tlb(tlb,ptepage,address) \
do { \
pgtable_page_dtor(ptepage); \
pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
- PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+ PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
} while (0)
#else
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, (pte))
#endif
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26f..82b7220 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
* generic accessors and iterators here
*/
#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
+ (e), ((e) & _PAGE_COMBO) ? \
+ (pte_val(*((p) + PTRS_PER_PTE))) : 0 })
#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
(((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
#define __rpte_to_pte(r) ((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c1233..168fce7 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@
unsigned long entry; /* physical address pointer */
unsigned long base; /* physical address pointer */
unsigned long size;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct rtas_args args;
struct device_node *dev; /* virtual address pointer */
};
@@ -245,5 +245,8 @@
(devfn << 8) | (reg & 0xff);
}
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9aba5a3..c8b3292 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -46,15 +46,13 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 20a60d6..ccf129d 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/lmb.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
@@ -90,11 +91,10 @@
static int dma_direct_dma_supported(struct device *dev, u64 mask)
{
#ifdef CONFIG_PPC64
- /* Could be improved to check for memory though it better be
- * done via some global so platforms can set the limit in case
+ /* Could be improved so platforms can set the limit in case
* they have limited DMA windows
*/
- return mask >= DMA_BIT_MASK(32);
+ return mask >= (lmb_end_of_DRAM() - 1);
#else
return 1;
#endif
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f1..3cadba6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 4846946..fc21329 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@
RFI
/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET. From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
- oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
- oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
- mtspr SPRN_IBAT1U,r9
- mtspr SPRN_IBAT1L,r10
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT1U,r11
+ mtspr SPRN_IBAT1L,r8
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT2U,r11
+ mtspr SPRN_IBAT2L,r8
isync
blr
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47f..cc466d0 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
*/
#include <linux/string.h>
#include <linux/perf_counter.h>
-#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
@@ -408,7 +407,8 @@
static int init_mpc7450_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
return -ENODEV;
return register_power_pmu(&mpc7450_pmu);
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a5..a359cb0 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@
dev->dev.archdata.of_node = np;
if (bus_id)
- dev_set_name(&dev->dev, bus_id);
+ dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 809fdf9..70e1f57 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -518,6 +518,8 @@
struct cpu_hw_counters *cpuhw;
unsigned long flags;
+ if (!ppmu)
+ return;
local_irq_save(flags);
cpuhw = &__get_cpu_var(cpu_hw_counters);
@@ -572,6 +574,8 @@
int n_lim;
int idx;
+ if (!ppmu)
+ return;
local_irq_save(flags);
cpuhw = &__get_cpu_var(cpu_hw_counters);
if (!cpuhw->disabled) {
@@ -737,6 +741,8 @@
long i, n, n0;
struct perf_counter *sub;
+ if (!ppmu)
+ return 0;
cpuhw = &__get_cpu_var(cpu_hw_counters);
n0 = cpuhw->n_counters;
n = collect_events(group_leader, ppmu->n_counter - n0,
@@ -1281,6 +1287,8 @@
{
struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu);
+ if (!ppmu)
+ return;
memset(cpuhw, 0, sizeof(*cpuhw));
cpuhw->mmcr[0] = MMCR0_FC;
}
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
index db90b0c..3c90a3d 100644
--- a/arch/powerpc/kernel/power4-pmu.c
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -606,7 +606,8 @@
static int init_power4_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
return -ENODEV;
return register_power_pmu(&power4_pmu);
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index f4adca8..31918af 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -678,8 +678,9 @@
static int init_power5p_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
- && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
+ && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")))
return -ENODEV;
return register_power_pmu(&power5p_pmu);
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index 29b2c6c..867f6f6 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -618,7 +618,8 @@
static int init_power5_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
return -ENODEV;
return register_power_pmu(&power5_pmu);
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index 09ae5bf..fa21890 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -537,7 +537,8 @@
static int init_power6_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
return -ENODEV;
return register_power_pmu(&power6_pmu);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5d755ef..388cf57 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -358,6 +358,7 @@
.get_constraint = power7_get_constraint,
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
+ .flags = PPMU_ALT_SIPR,
.n_generic = ARRAY_SIZE(power7_generic_events),
.generic_events = power7_generic_events,
.cache_events = &power7_cache_events,
@@ -365,7 +366,8 @@
static int init_power7_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
return -ENODEV;
return register_power_pmu(&power7_pmu);
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87f..75dccb7 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
*/
#include <linux/string.h>
#include <linux/perf_counter.h>
-#include <linux/string.h>
#include <asm/reg.h>
#include <asm/cputable.h>
@@ -489,8 +488,9 @@
static int init_ppc970_pmu(void)
{
- if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
- && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP"))
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
+ && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")))
return -ENODEV;
return register_power_pmu(&ppc970_pmu);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bb..892a9f2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
- printk("\n" KERN_INFO "GPR%02d: ", i);
+ printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 9fa2c7d..ef14988 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -736,15 +736,16 @@
{
struct pt_regs *regs = task->thread.regs;
-
-#if defined(CONFIG_BOOKE)
- /* If DAC then do not single step, skip */
- if (task->thread.dabr)
- return;
-#endif
-
if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
+ /* If DAC don't clear DBCRO_IDM or MSR_DE */
+ if (task->thread.dabr)
+ task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
+ else {
+ task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+ regs->msr &= ~MSR_DE;
+ }
+#elif defined(CONFIG_40x)
task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
regs->msr &= ~MSR_DE;
#else
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 297632c..8a6daf4 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -21,7 +21,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/regset.h>
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c760..c434823 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
#include <asm/syscalls.h>
#include <asm/smp.h>
#include <asm/atomic.h>
+#include <asm/time.h>
struct rtas_t rtas = {
- .lock = SPIN_LOCK_UNLOCKED
+ .lock = __RAW_SPIN_LOCK_UNLOCKED
};
EXPORT_SYMBOL(rtas);
@@ -67,6 +68,28 @@
void (*rtas_flash_term_hook)(int);
EXPORT_SYMBOL(rtas_flash_term_hook);
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ __raw_spin_lock_flags(&rtas.lock, flags);
+ return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+ __raw_spin_unlock(&rtas.lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@
if (!rtas.base)
return;
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
args->token = 10;
args->nargs = 1;
@@ -89,7 +112,7 @@
enter_rtas(__pa(args));
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
}
static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@
if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
- /* Gotta do something different here, use global lock for now... */
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
rtas_args = &rtas.args;
rtas_args->token = token;
@@ -439,8 +461,7 @@
outputs[i] = rtas_args->rets[i+1];
ret = (nret > 0)? rtas_args->rets[0]: 0;
- /* Gotta do something different here, use global lock for now... */
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
if (buff_copy) {
log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@
buff_copy = get_errorlog_buffer();
- spin_lock_irqsave(&rtas.lock, flags);
+ flags = lock_rtas();
rtas.args = args;
enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@
if (args.rets[0] == -1)
errbuf = __fetch_rtas_last_error(buff_copy);
- spin_unlock_irqrestore(&rtas.lock, flags);
+ unlock_rtas(flags);
if (buff_copy) {
if (errbuf)
@@ -951,3 +972,33 @@
/* break now */
return 1;
}
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
+ rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+ timebase = get_tb();
+ __raw_spin_unlock(&timebase_lock);
+
+ while (timebase)
+ barrier();
+ rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+ local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+ while (!timebase)
+ barrier();
+ __raw_spin_lock(&timebase_lock);
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ __raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d15424..e1e3059 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
+ lockdep_init();
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2..0b47de0 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
int smt_enabled_at_boot = 1;
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a89..acb74a1 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ef36cbbc..ea4d646 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -80,10 +80,10 @@
mtvscr vr0
REST_32VRS(0,r4,r5)
#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
+ /* Update last_task_used_altivec to 'current' */
subi r4,r5,THREAD /* Back to 'current' */
fromreal(r4)
- PPC_STL r4,ADDROFF(last_task_used_math)(r3)
+ PPC_STL r4,ADDROFF(last_task_used_altivec)(r3)
#endif /* CONFIG_SMP */
/* restore registers and return */
blr
@@ -172,7 +172,7 @@
oris r12,r12,MSR_VSX@h
std r12,_MSR(r1)
#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
+ /* Update last_task_used_vsx to 'current' */
ld r4,PACACURRENT(r13)
std r4,0(r3)
#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e..3e68363 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c7..bc122a1 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@
int psize;
#endif
- pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+ pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
start &= PAGE_MASK;
addr = start;
@@ -170,7 +170,7 @@
start, len)))
goto slow_irqon;
- pr_debug(" aligned: %lx .. %lx\n", start, end);
+ pr_devel(" aligned: %lx .. %lx\n", start, end);
#ifdef CONFIG_HUGETLB_PAGE
/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@
do {
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
ptep = huge_pte_offset(mm, a);
- pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+ pr_devel(" %016lx: huge ptep %p\n", a, ptep);
if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
&nr))
goto slow;
@@ -249,7 +249,7 @@
#ifdef CONFIG_PPC64
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
#endif
- pr_debug(" %016lx: normal pgd %p\n", addr,
+ pr_devel(" %016lx: normal pgd %p\n", addr,
(void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
if (pgd_none(pgd))
@@ -269,7 +269,7 @@
slow:
local_irq_enable();
slow_irqon:
- pr_debug(" slow path ! nr = %d\n", nr);
+ pr_devel(" slow path ! nr = %d\n", nr);
/* Try to get the remaining pages with get_user_pages */
start += nr << PAGE_SHIFT;
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 0000000..c2186c7
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+ local_flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+ pagefault_enable();
+ return;
+ }
+
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ local_flush_tlb_page(NULL, vaddr);
+#endif
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9920d6a..c46ef2f 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -305,7 +305,7 @@
pmd = pmd_offset(pud, start);
pud_clear(pud);
- pmd_free_tlb(tlb, pmd);
+ pmd_free_tlb(tlb, pmd, start);
}
static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -348,7 +348,7 @@
pud = pud_offset(pgd, start);
pgd_clear(pgd);
- pud_free_tlb(tlb, pud);
+ pud_free_tlb(tlb, pud, start);
}
/*
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986..b1a727d 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@
id = first_context;
continue;
}
- pr_debug("[%d] steal context %d from mm @%p\n",
+ pr_devel("[%d] steal context %d from mm @%p\n",
smp_processor_id(), id, mm);
/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@
/* Pick up the victim mm */
mm = context_mm[id];
- pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+ pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@
spin_lock(&context_lock);
#ifndef DEBUG_STEAL_ONLY
- pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+ pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
cpu, next, next->context.active, next->context.id);
#endif
@@ -189,7 +189,7 @@
next->context.active++;
if (prev) {
#ifndef DEBUG_STEAL_ONLY
- pr_debug(" old context %p active was: %d\n",
+ pr_devel(" old context %p active was: %d\n",
prev, prev->context.active);
#endif
WARN_ON(prev->context.active < 1);
@@ -217,6 +217,7 @@
id = steal_context_smp(id);
if (id == MMU_NO_CONTEXT)
goto again;
+ goto stolen;
}
#endif /* CONFIG_SMP */
id = steal_context_up(id);
@@ -236,7 +237,7 @@
next->context.id = id;
#ifndef DEBUG_STEAL_ONLY
- pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+ pr_devel("[%d] picked up new id %d, nrf is now %d\n",
cpu, id, nr_free_contexts);
#endif
@@ -247,7 +248,7 @@
* local TLB for it and unmark it before we use it
*/
if (test_bit(id, stale_map[cpu])) {
- pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+ pr_devel("[%d] flushing stale context %d for mm @%p !\n",
cpu, id, next);
local_flush_tlb_mm(next);
@@ -314,13 +315,13 @@
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+ pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
break;
#ifdef CONFIG_HOTPLUG_CPU
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+ pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
kfree(stale_map[cpu]);
stale_map[cpu] = NULL;
break;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67c..627767d 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@
page = pfn_to_page(pfn);
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
- pr_debug("do_dcache_icache_coherency... flushing\n");
+ pr_devel("do_dcache_icache_coherency... flushing\n");
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
}
else
- pr_debug("do_dcache_icache_coherency... already clean\n");
+ pr_devel("do_dcache_icache_coherency... already clean\n");
return __pte(pte_val(pte) | _PAGE_HWEXEC);
}
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80..5b7038f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#undef DEBUG
-
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
#include <linux/compiler.h>
#include <asm/udbg.h>
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
extern void slb_allocate_realmode(unsigned long ea);
extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
- DBG("SLB: linear LLP = %04lx\n", linear_llp);
- DBG("SLB: io LLP = %04lx\n", io_llp);
+ pr_devel("SLB: linear LLP = %04lx\n", linear_llp);
+ pr_devel("SLB: io LLP = %04lx\n", io_llp);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
patch_slb_encoding(slb_miss_kernel_load_vmemmap,
SLB_VSID_KERNEL | vmemmap_llp);
- DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+ pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
#endif
}
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e..937eb90 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@
*/
if (huge) {
#ifdef CONFIG_HUGETLB_PAGE
- psize = get_slice_psize(mm, addr);;
+ psize = get_slice_psize(mm, addr);
#else
BUG();
psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa44..c591339 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@
goto fail;
if (shdr_str.sh_type != SHT_STRTAB)
- goto fail;;
+ goto fail;
for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9..e5c1b09 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -63,9 +64,6 @@
};
-static u32 post_info;
-
-/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
struct device_node *np;
@@ -87,10 +85,9 @@
iounmap(fpga);
- if (post1 || post2) {
+ if (post1 || post2)
printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
- post_info = 1;
- } else
+ else
printk(KERN_INFO "Warp POST OK\n");
return 0;
@@ -166,6 +163,9 @@
value ^= 1;
mdelay(500);
}
+
+ /* Not reached */
+ return IRQ_HANDLED;
}
static int pika_setup_leds(void)
@@ -179,24 +179,19 @@
}
for_each_child_of_node(np, child)
- if (strcmp(child->name, "green") == 0) {
+ if (strcmp(child->name, "green") == 0)
green_led = of_get_gpio(child, 0);
- /* Turn back on the green LED */
- gpio_set_value(green_led, 1);
- } else if (strcmp(child->name, "red") == 0) {
+ else if (strcmp(child->name, "red") == 0)
red_led = of_get_gpio(child, 0);
- /* Set based on post */
- gpio_set_value(red_led, post_info);
- }
of_node_put(np);
return 0;
}
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+ struct i2c_client *client)
{
- struct device_node *np;
int irq, rc;
/* Do this before enabling critical temp interrupt since we
@@ -208,14 +203,7 @@
i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */
- np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
- return;
- }
-
irq = irq_of_parse_and_map(np, 0);
- of_node_put(np);
if (irq == NO_IRQ) {
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
return;
@@ -244,32 +232,24 @@
static int pika_dtm_thread(void __iomem *fpga)
{
- struct i2c_adapter *adap;
+ struct device_node *np;
struct i2c_client *client;
- /* We loop in case either driver was compiled as a module and
- * has not been insmoded yet.
- */
- while (!(adap = i2c_get_adapter(0))) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL)
+ return -ENOENT;
+
+ client = of_find_i2c_device_by_node(np);
+ if (client == NULL) {
+ of_node_put(np);
+ return -ENOENT;
}
- while (1) {
- list_for_each_entry(client, &adap->clients, list)
- if (client->addr == 0x4a)
- goto found_it;
+ pika_setup_critical_temp(np, client);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
- }
+ of_node_put(np);
-found_it:
- pika_setup_critical_temp(client);
-
- i2c_put_adapter(adap);
-
- printk(KERN_INFO "PIKA DTM thread running.\n");
+ printk(KERN_INFO "Warp DTM thread running.\n");
while (!kthread_should_stop()) {
int val;
@@ -291,7 +271,6 @@
return 0;
}
-
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc..7ee979f 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@
goto out;
}
- priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
of_node_put(np);
ret = -ENOMEM;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b3..bfb3283 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -233,6 +233,19 @@
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+ } else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST (0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
+ /*
+ * U-Boot mangles interrupt polarity for Marvell PHYs,
+ * so reset built-in and UEM Marvell PHYs, this puts
+ * the PHYs into their normal state.
+ */
+ clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+ setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+ setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+ clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
}
iounmap(bcsr_regs);
}
@@ -285,6 +298,7 @@
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db..62c592ede6 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
- local_irq_save(flags);
-
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
- local_irq_restore(flags);
return;
}
/* Map the spin table */
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ local_irq_save(flags);
+
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
@@ -73,10 +72,10 @@
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
- iounmap(bptr_vaddr);
-
local_irq_restore(flags);
+ iounmap(bptr_vaddr);
+
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443..747d8fb 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@
{},
};
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
{
- of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+ return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
+machine_device_initcall(socrates, socrates_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
- .init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532..1b42605 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498d..aca5741 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@
static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
{
- pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+ pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
dcr_write(msic->dcr_host, dcr_n, val);
}
@@ -98,7 +98,7 @@
int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
- pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+ pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
- pr_debug("axon_msi: woff %x roff %x msi %x\n",
+ pr_devel("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@
*/
udelay(1);
retry++;
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
continue;
}
if (retry) {
- pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ pr_devel("axon_msi: late irq 0x%x, retry %d\n",
msi, retry);
retry = 0;
}
@@ -332,7 +332,7 @@
struct axon_msic *msic = dev_get_drvdata(&device->dev);
u32 tmp;
- pr_debug("axon_msi: disabling %s\n",
+ pr_devel("axon_msi: disabling %s\n",
msic->irq_host->of_node->full_name);
tmp = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@
unsigned int virq;
int dcr_base, dcr_len;
- pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+ pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
if (!msic) {
@@ -403,7 +403,7 @@
set_irq_data(virq, msic);
set_irq_chained_handler(virq, axon_msi_cascade);
- pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+ pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
/* Enable the MSIC hardware */
msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@
addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
if (addr == OF_BAD_ADDR) {
- pr_debug("axon_msi: couldn't translate reg property\n");
+ pr_devel("axon_msi: couldn't translate reg property\n");
return;
}
msic->trigger = ioremap(addr, 0x4);
if (!msic->trigger) {
- pr_debug("axon_msi: ioremap failed\n");
+ pr_devel("axon_msi: ioremap failed\n");
return;
}
@@ -498,7 +498,7 @@
if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
msic, &fops_msic)) {
- pr_debug("axon_msi: debugfs_create_file failed!\n");
+ pr_devel("axon_msi: debugfs_create_file failed!\n");
return;
}
}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803..bc97fad 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -140,31 +139,6 @@
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = cell_give_timebase;
- smp_ops->take_timebase = cell_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d..02cafec 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@@ -42,40 +41,12 @@
mpic_setup_this_cpu();
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase_upper = get_tbu();
- timebase_lower = get_tbl();
- spin_unlock(&timebase_lock);
-
- while (timebase_upper || timebase_lower)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
- while (!(timebase_upper || timebase_lower))
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase_upper, timebase_lower);
- timebase_upper = 0;
- timebase_lower = 0;
- spin_unlock(&timebase_lock);
- printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
/* CHRP with openpic */
struct smp_ops_t chrp_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_chrp_kick_cpu,
.setup_cpu = smp_chrp_setup_cpu,
- .give_timebase = smp_chrp_give_timebase,
- .take_timebase = smp_chrp_take_timebase,
+ .give_timebase = rtas_give_timebase,
+ .take_timebase = rtas_take_timebase,
};
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051e..a461934 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@
}
#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
- spin_lock(&timebase_lock);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
+ local_irq_restore(flags);
}
static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@
while (!timebase)
smp_rmb();
- spin_lock(&timebase_lock);
+ __raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe..708c751 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@
static struct pmf_function *pfunc_cpu_setfreq_high;
static struct pmf_function *pfunc_cpu_setfreq_low;
static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
static int g5_pfunc_switch_freq(int speed_mode)
{
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce7363..d212006 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@
np = of_find_node_by_name(NULL, "via-pmu");
if (np == NULL)
goto not_found;
- viaint = irq_of_parse_and_map(np, 0);;
+ viaint = irq_of_parse_and_map(np, 0);
not_found:
#endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4..c205226 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
@@ -341,34 +336,6 @@
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
-#ifdef CONFIG_SMP
- /* Check for Core99 */
- ic = of_find_node_by_name(NULL, "uni-n");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u3");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u4");
- if (ic) {
- of_node_put(ic);
- smp_ops = &core99_smp_ops;
- }
-#ifdef CONFIG_PPC32
- else {
- /*
- * We have to set bits in cpu_possible_map here since the
- * secondary CPU(s) aren't in the device tree, and
- * setup_per_cpu_areas only allocates per-cpu data for
- * CPUs in the cpu_possible_map.
- */
- int cpu;
-
- for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
- smp_ops = &psurge_smp_ops;
- }
-#endif
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
@@ -512,6 +479,14 @@
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
+
+ /* SMP Init has to be done early as we need to patch up
+ * cpu_possible_map before interrupt stacks are allocated
+ * or kaboom...
+ */
+#ifdef CONFIG_SMP
+ pmac_setup_smp();
+#endif
}
static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe7..6d4da7b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
extern void __secondary_start_pmac_0(void);
extern int pmac_pfunc_base_install(void);
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
/*
* Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@
psurge_quad_init();
/* All released cards using this HW design have 4 CPUs */
ncpus = 4;
+ /* No sure how timebase sync works on those, let's use SW */
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
} else {
iounmap(quad_base);
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
- /*
- * This is necessary because OF doesn't know about the
+ /* This is necessary because OF doesn't know about the
* secondary cpu(s), and thus there aren't nodes in the
* device tree for them, and smp_setup_cpu_maps hasn't
- * set their bits in cpu_possible_map and cpu_present_map.
+ * set their bits in cpu_present_map.
*/
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
- for (i = 1; i < ncpus ; ++i) {
+ for (i = 1; i < ncpus ; ++i)
cpu_set(i, cpu_present_map);
- set_hard_smp_processor_id(i, i);
- }
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
@@ -329,8 +330,14 @@
static void __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
- unsigned long a;
- int i;
+ unsigned long a, flags;
+ int i, j;
+
+ /* Defining this here is evil ... but I prefer hiding that
+ * crap to avoid giving people ideas that they can do the
+ * same.
+ */
+ extern volatile unsigned int cpu_callin_map[NR_CPUS];
/* may need to flush here if secondary bats aren't setup */
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+ /* This is going to freeze the timeebase, we disable interrupts */
+ local_irq_save(flags);
+
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
+
/*
* We can't use udelay here because the timebase is now frozen.
*/
for (i = 0; i < 2000; ++i)
- barrier();
+ asm volatile("nop" : : : "memory");
psurge_clr_ipi(nr);
- if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt. This routine
- * uses this to get the timebases synchronized.
- * -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
- int t;
-
- set_dec(tb_ticks_per_jiffy);
- /* XXX fixme */
- set_tb(0, 0);
-
- if (cpu_nr > 0) {
- mb();
- sec_tb_reset = 1;
- return;
+ /*
+ * Also, because the timebase is frozen, we must not return to the
+ * caller which will try to do udelay's etc... Instead, we wait -here-
+ * for the CPU to callin.
+ */
+ for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+ for (j = 1; j < 10000; j++)
+ asm volatile("nop" : : : "memory");
+ asm volatile("sync" : : : "memory");
}
+ if (!cpu_callin_map[nr])
+ goto stuck;
- /* wait for the secondary to have reset its TB before proceeding */
- for (t = 10000000; t > 0 && !sec_tb_reset; --t)
- ;
+ /* And we do the TB sync here too for standard dual CPU cards */
+ if (psurge_type == PSURGE_DUAL) {
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ }
+ stuck:
+ /* now interrupt the secondary, restarting both TBs */
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
- /* now interrupt the secondary, starting both TBs */
- psurge_set_ipi(1);
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
+ if (cpu_nr != 0)
+ return;
- if (cpu_nr == 0) {
- /* If we failed to start the second CPU, we should still
- * send it an IPI to start the timebase & DEC or we might
- * have them stuck.
- */
- if (num_online_cpus() < 2) {
- if (psurge_type == PSURGE_DUAL)
- psurge_set_ipi(1);
- return;
- }
- /* reset the entry point so if we get another intr we won't
- * try to startup again */
- out_be32(psurge_start, 0x100);
- if (setup_irq(30, &psurge_irqaction))
- printk(KERN_ERR "Couldn't get primary IPI interrupt");
- }
-
- if (psurge_type == PSURGE_DUAL)
- psurge_dual_sync_tb(cpu_nr);
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ if (setup_irq(30, &psurge_irqaction))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
void __init smp_psurge_take_timebase(void)
{
- /* Dummy implementation */
+ if (psurge_type != PSURGE_DUAL)
+ return;
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
}
void __init smp_psurge_give_timebase(void)
{
- /* Dummy implementation */
+ /* Nothing to do here */
}
/* PowerSurge-style Macs */
@@ -437,9 +448,6 @@
* Core 99 and later support
*/
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
static void smp_core99_give_timebase(void)
{
@@ -478,7 +486,6 @@
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
- set_dec(tb_ticks_per_jiffy/2);
local_irq_restore(flags);
}
@@ -920,3 +927,34 @@
# endif
#endif
};
+
+void __init pmac_setup_smp(void)
+{
+ struct device_node *np;
+
+ /* Check for Core99 */
+ np = of_find_node_by_name(NULL, "uni-n");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u3");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u4");
+ if (np) {
+ of_node_put(np);
+ smp_ops = &core99_smp_ops;
+ }
+#ifdef CONFIG_PPC32
+ else {
+ /* We have to set bits in cpu_possible_map here since the
+ * secondary CPU(s) aren't in the device tree. Various
+ * things won't be initialized for CPUs not in the possible
+ * map, so we really need to fix it up here.
+ */
+ int cpu;
+
+ for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+ cpu_set(cpu, cpu_possible_map);
+ smp_ops = &psurge_smp_ops;
+ }
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0f..3f763c5 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@
int result;
dump_mmio_region(r);
-;
result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
r->lpar_addr);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa..903eb9e 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@
unsigned long hpte_v, hpte_r;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+ pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
"rflags=%lx, vflags=%lx, psize=%d)\n",
hpte_group, va, pa, rflags, vflags, psize);
@@ -294,7 +294,7 @@
hpte_r = hpte_encode_r(pa, psize) | rflags;
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+ pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
/* Now fill in the actual HPTE */
/* Set CEC cookie to 0 */
@@ -311,7 +311,7 @@
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" full\n");
+ pr_devel(" full\n");
return -1;
}
@@ -322,11 +322,11 @@
*/
if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" lpar err %lu\n", lpar_rc);
+ pr_devel(" lpar err %lu\n", lpar_rc);
return -2;
}
if (!(vflags & HPTE_V_BOLTED))
- pr_debug(" -> slot: %lu\n", slot & 7);
+ pr_devel(" -> slot: %lu\n", slot & 7);
/* Because of iSeries, we have to pass down the secondary
* bucket bit here as well
@@ -418,17 +418,17 @@
want_v = hpte_encode_avpn(va, psize, ssize);
- pr_debug(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+ pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
want_v, slot, flags, psize);
lpar_rc = plpar_pte_protect(flags, slot, want_v);
if (lpar_rc == H_NOT_FOUND) {
- pr_debug("not found !\n");
+ pr_devel("not found !\n");
return -1;
}
- pr_debug("ok\n");
+ pr_devel("ok\n");
BUG_ON(lpar_rc != H_SUCCESS);
@@ -503,7 +503,7 @@
unsigned long lpar_rc;
unsigned long dummy1, dummy2;
- pr_debug(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+ pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
slot, va, psize, local);
want_v = hpte_encode_avpn(va, psize, ssize);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c3..1f8f6cf 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -118,31 +117,6 @@
}
#endif /* CONFIG_XICS */
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = pSeries_give_timebase;
- smp_ops->take_timebase = pSeries_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a..419f8a6 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@
int call_status;
int server;
- pr_debug("xics: unmask virq %d\n", virq);
+ pr_devel("xics: unmask virq %d\n", virq);
irq = (unsigned int)irq_map[virq].hwirq;
- pr_debug(" -> map to hwirq 0x%x\n", irq);
+ pr_devel(" -> map to hwirq 0x%x\n", irq);
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
@@ -252,7 +252,7 @@
{
unsigned int irq;
- pr_debug("xics: mask virq %d\n", virq);
+ pr_devel("xics: mask virq %d\n", virq);
irq = (unsigned int)irq_map[virq].hwirq;
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@
static int xics_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+ pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
/* Insert the interrupt mapping into the radix tree for fast lookup */
irq_radix_revmap_insert(xics_host, virq, hw);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1..cbb3bed 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@
break;
default:
str = "Unknown";
- break;;
+ break;
}
dev_info(dev, "Hardware port width: %s\n", str);
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce..69e2630 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@
if (ret)
return NULL;
- ipic = alloc_bootmem(sizeof(struct ipic));
+ ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
if (ipic == NULL)
return NULL;
- memset(ipic, 0, sizeof(struct ipic));
-
ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_IPIC_INTS,
&ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af50..3981ae4 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+ struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
const u32 *dbasep;
- dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+ dbasep = of_get_property(node, "dcr-reg", NULL);
- rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+ rb->dhost = dcr_map(node, *dbasep + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
- struct mpic_reg_bank *rb, unsigned int offset,
- unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+ phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+ unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, rb, offset, size);
+ _mpic_map_dcr(mpic, node, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -507,9 +508,8 @@
printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
/* Allocate fixups array */
- mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+ mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
BUG_ON(mpic->fixups == NULL);
- memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
/* Init spinlock */
spin_lock_init(&mpic->fixup_lock);
@@ -1052,11 +1052,10 @@
int intvec_top;
u64 paddr = phys_addr;
- mpic = alloc_bootmem(sizeof(struct mpic));
+ mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
return NULL;
-
- memset(mpic, 0, sizeof(struct mpic));
+
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
@@ -1109,9 +1108,8 @@
psize /= 4;
bits = intvec_top + 1;
mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
- mpic->protected = alloc_bootmem(mapsize);
+ mpic->protected = kzalloc(mapsize, GFP_KERNEL);
BUG_ON(mpic->protected == NULL);
- memset(mpic->protected, 0, mapsize);
for (i = 0; i < psize; i++) {
if (psrc[i] > intvec_top)
continue;
@@ -1152,8 +1150,8 @@
}
/* Map the global registers */
- mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1192,7 @@
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
- mpic_map(mpic, paddr, &mpic->cpuregs[i],
+ mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1202,7 +1200,7 @@
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, paddr, &mpic->isus[0],
+ mpic_map(mpic, node, paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1254,10 @@
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+ mpic_map(mpic, mpic->irqhost->of_node,
+ paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size;
}
@@ -1351,7 +1351,8 @@
#ifdef CONFIG_PM
/* allocate memory to save mpic state */
- mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+ mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+ GFP_KERNEL);
BUG_ON(mpic->save_data == NULL);
#endif
}
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93..6ff9d71 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@
*/
/* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(ep_size));;
+ sa = (0xffffffffffffffffull << ilog2(ep_size));
/* Setup BAR0 */
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@
out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
} else {
/* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(size));;
+ sa = (0xffffffffffffffffull << ilog2(size));
if (res->flags & IORESOURCE_PREFETCH)
sa |= 0x8;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e5..237e365 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@
}
/* wait for the QE_CR_FLG to clear */
- while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
- cpu_relax();
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
- return 0;
+ return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf98..074905c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@
if (ret)
return;
- qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+ qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
if (qe_ic == NULL)
return;
- memset(qe_ic, 0, sizeof(struct qe_ic));
-
qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
NR_QE_IC_INTS, &qe_ic_host_ops, 0);
if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c..466ce9a 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@
BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
- uic = alloc_bootmem(sizeof(*uic));
+ uic = kzalloc(sizeof(*uic), GFP_KERNEL);
if (! uic)
return NULL; /* FIXME: panic? */
- memset(uic, 0, sizeof(*uic));
spin_lock_init(&uic->lock);
indexp = of_get_property(node, "cell-index", &len);
if (!indexp || (len != sizeof(u32))) {
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e577839..2ae5d72 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,11 @@
select HAVE_ARCH_TRACEHOOK
select INIT_ALL_POSSIBLE
select HAVE_PERF_COUNTERS
+ select GENERIC_ATOMIC64 if !64BIT
+
+config SCHED_OMIT_FRAME_POINTER
+ bool
+ default y
source "init/Kconfig"
@@ -116,6 +121,9 @@
bool
default y if !64BIT
+config KTIME_SCALAR
+ def_bool 32BIT
+
config SMP
bool "Symmetric multi-processing support"
---help---
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index fca9dff..c7d0abf 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -268,7 +268,12 @@
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#undef __CSG_LOOP
-#endif
+
+#else /* __s390x__ */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* __s390x__ */
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5..1cd02f6 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@
__u8 reservedd0[48]; /* 0x00d0 */
__u64 gcr[16]; /* 0x0100 */
__u64 gbea; /* 0x0180 */
- __u8 reserved188[120]; /* 0x0188 */
+ __u8 reserved188[24]; /* 0x0188 */
+ __u32 fac; /* 0x01a0 */
+ __u8 reserved1a4[92]; /* 0x01a4 */
} __attribute__((packed));
struct kvm_vcpu_stat {
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
index a7205a3..7015188 100644
--- a/arch/s390/include/asm/perf_counter.h
+++ b/arch/s390/include/asm/perf_counter.h
@@ -6,3 +6,5 @@
static inline void set_perf_counter_pending(void) {}
static inline void clear_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 925bcc6..ba1cab9 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,7 +61,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d..81150b0 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -96,7 +96,8 @@
* pte_free_tlb frees a pte table and clears the CRSTE for the
* page table from the tlb.
*/
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+ unsigned long address)
{
if (!tlb->fullmm) {
tlb->array[tlb->nr_ptes++] = pte;
@@ -113,7 +114,8 @@
* as the pgd. pmd_free_tlb checks the asce_limit against 2GB
* to avoid the double free of the pmd in this case.
*/
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long address)
{
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
@@ -134,7 +136,8 @@
* as the pgd. pud_free_tlb checks the asce_limit against 4TB
* to avoid the double free of the pud in this case.
*/
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+ unsigned long address)
{
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index d2f270c..db943a7 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -15,7 +15,6 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index f9b1440..cae14c4 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -208,9 +208,12 @@
machine_flags |= MACHINE_FLAG_KVM;
else
machine_flags |= MACHINE_FLAG_VM;
+
+ /* Store machine flags for setting up lowcore early */
+ S390_lowcore.machine_flags = machine_flags;
}
-static void early_pgm_check_handler(void)
+static __init void early_pgm_check_handler(void)
{
unsigned long addr;
const struct exception_table_entry *fixup;
@@ -222,7 +225,7 @@
S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
}
-void setup_lowcore_early(void)
+static noinline __init void setup_lowcore_early(void)
{
psw_t psw;
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index b8bf4b1..371a2d8 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -70,6 +70,7 @@
char *name;
void (*fn) (struct shutdown_trigger *trigger);
int (*init) (void);
+ int init_rc;
};
static char *ipl_type_str(enum ipl_type type)
@@ -1486,11 +1487,13 @@
int i;
for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
- if (!shutdown_actions_list[i])
- continue;
if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
- trigger->action = shutdown_actions_list[i];
- return len;
+ if (shutdown_actions_list[i]->init_rc) {
+ return shutdown_actions_list[i]->init_rc;
+ } else {
+ trigger->action = shutdown_actions_list[i];
+ return len;
+ }
}
}
return -EINVAL;
@@ -1640,8 +1643,8 @@
for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
if (!shutdown_actions_list[i]->init)
continue;
- if (shutdown_actions_list[i]->init())
- shutdown_actions_list[i] = NULL;
+ shutdown_actions_list[i]->init_rc =
+ shutdown_actions_list[i]->init();
}
}
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 490b399..43acd73 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -26,7 +26,6 @@
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2270730..be2cae0 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -687,13 +687,14 @@
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE)
lowcore->extended_save_area_addr = (u32) save_area;
-#else
- if (vdso_alloc_per_cpu(smp_processor_id(), lowcore))
- BUG();
#endif
set_prefix((u32)(unsigned long) lowcore);
local_mcck_enable();
local_irq_enable();
+#ifdef CONFIG_64BIT
+ if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
+ BUG();
+#endif
for_each_possible_cpu(cpu)
if (cpu != smp_processor_id())
smp_create_idle(cpu);
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 79dbfee..49106c6 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -88,10 +88,17 @@
llilh %r4,0x0100
sar %a4,%r4
lghi %r4,0
+ epsw %r5,0
sacf 512 /* Magic ectg instruction */
.insn ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
- sacf 0
- sar %a4,%r2
+ tml %r5,0x4000
+ jo 11f
+ tml %r5,0x8000
+ jno 10f
+ sacf 256
+ j 11f
+10: sacf 0
+11: sar %a4,%r2
algr %r1,%r0 /* r1 = cputime as TOD value */
mghi %r1,1000 /* convert to nanoseconds */
srlg %r1,%r1,12 /* r1 = cputime in nanosec */
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index f04f530..4d61341 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -386,7 +386,7 @@
}
__unset_cpu_idle(vcpu);
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&vcpu->wq, &wait);
+ remove_wait_queue(&vcpu->arch.local_int.wq, &wait);
spin_unlock_bh(&vcpu->arch.local_int.lock);
spin_unlock(&vcpu->arch.local_int.float_int->lock);
hrtimer_try_to_cancel(&vcpu->arch.ckc_timer);
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d..90d9d1b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
#include <asm/lowcore.h>
#include <asm/pgtable.h>
#include <asm/nmi.h>
+#include <asm/system.h>
#include "kvm-s390.h"
#include "gaccess.h"
@@ -69,6 +70,7 @@
{ NULL }
};
+static unsigned long long *facilities;
/* Section: not file related */
void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@
vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
vcpu->arch.sie_block->ecb = 2;
vcpu->arch.sie_block->eca = 0xC1002001U;
+ vcpu->arch.sie_block->fac = (int) (long) facilities;
hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
(unsigned long) vcpu);
@@ -739,11 +742,29 @@
static int __init kvm_s390_init(void)
{
- return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ int ret;
+ ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+ if (ret)
+ return ret;
+
+ /*
+ * guests can ask for up to 255+1 double words, we need a full page
+ * to hold the maximum amount of facilites. On the other hand, we
+ * only set facilities that are known to work in KVM.
+ */
+ facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+ if (!facilities) {
+ kvm_exit();
+ return -ENOMEM;
+ }
+ stfle(facilities, 1);
+ facilities[0] &= 0xff00fff3f0700000ULL;
+ return 0;
}
static void __exit kvm_s390_exit(void)
{
+ free_page((unsigned long) facilities);
kvm_exit();
}
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06..d426aac 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@
vcpu->stat.instruction_stfl++;
/* only pass the facility bits, which we can handle */
- facility_list &= 0xfe00fff3;
+ facility_list &= 0xff00fff3;
rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
&facility_list, sizeof(facility_list));
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 3667883..0ef81d6 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -169,7 +169,7 @@
unsigned long *reg)
{
struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
- struct kvm_s390_local_interrupt *li;
+ struct kvm_s390_local_interrupt *li = NULL;
struct kvm_s390_interrupt_info *inti;
int rc;
u8 tmp;
@@ -189,9 +189,10 @@
return 2; /* busy */
spin_lock(&fi->lock);
- li = fi->local_int[cpu_addr];
+ if (cpu_addr < KVM_MAX_VCPUS)
+ li = fi->local_int[cpu_addr];
- if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) {
+ if (li == NULL) {
rc = 1; /* incorrect state */
*reg &= SIGP_STAT_INCORRECT_STATE;
kfree(inti);
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index ab6735d..97975ec 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,6 @@
#
lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
lib-$(CONFIG_64BIT) += uaccess_mvcos.o
lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 3f5f680..97c1eca8 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -36,9 +36,11 @@
cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
__ctl_load(cr0 , 0, 0);
mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ lockdep_off();
trace_hardirqs_on();
__load_psw_mask(mask);
local_irq_disable();
+ lockdep_on();
__ctl_load(cr0_saved, 0, 0);
local_tick_enable(clock_saved);
set_clock_comparator(S390_lowcore.clock_comparator);
diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c
new file mode 100644
index 0000000..3e05ff5
--- /dev/null
+++ b/arch/s390/lib/ucmpdi2.c
@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+union ull_union {
+ unsigned long long ull;
+ struct {
+ unsigned int high;
+ unsigned int low;
+ } ui;
+};
+
+int __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+ union ull_union au = {.ull = a};
+ union ull_union bu = {.ull = b};
+
+ if (au.ui.high < bu.ui.high)
+ return 0;
+ else if (au.ui.high > bu.ui.high)
+ return 2;
+ if (au.ui.low < bu.ui.low)
+ return 0;
+ else if (au.ui.low > bu.ui.low)
+ return 2;
+ return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 74eb26b..e5e119f 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -22,7 +22,6 @@
#include <linux/compat.h>
#include <linux/smp.h>
#include <linux/kdebug.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/module.h>
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
index e6a4fe9..bd1f5c6 100644
--- a/arch/s390/power/swsusp.c
+++ b/arch/s390/power/swsusp.c
@@ -7,24 +7,36 @@
*
*/
+#include <asm/system.h>
-/*
- * save CPU registers before creating a hibernation image and before
- * restoring the memory state from it
- */
void save_processor_state(void)
{
- /* implentation contained in the
- * swsusp_arch_suspend function
+ /* swsusp_arch_suspend() actually saves all cpu register contents.
+ * Machine checks must be disabled since swsusp_arch_suspend() stores
+ * register contents to their lowcore save areas. That's the same
+ * place where register contents on machine checks would be saved.
+ * To avoid register corruption disable machine checks.
+ * We must also disable machine checks in the new psw mask for
+ * program checks, since swsusp_arch_suspend() may generate program
+ * checks. Disabling machine checks for all other new psw masks is
+ * just paranoia.
*/
+ local_mcck_disable();
+ /* Disable lowcore protection */
+ __ctl_clear_bit(0,28);
+ S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
}
-/*
- * restore the contents of CPU registers
- */
void restore_processor_state(void)
{
- /* implentation contained in the
- * swsusp_arch_resume function
- */
+ S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+ /* Enable lowcore protection */
+ __ctl_set_bit(0,28);
+ local_mcck_enable();
}
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index 76d688d..b26df5c 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -32,19 +32,14 @@
/* Deactivate DAT */
stnsm __SF_EMPTY(%r15),0xfb
- /* Switch off lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- ni __SF_EMPTY+4(%r15),0xef
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Store prefix register on stack */
stpx __SF_EMPTY(%r15)
- /* Setup base register for lowcore (absolute 0) */
- llgf %r1,__SF_EMPTY(%r15)
+ /* Save prefix register contents for lowcore */
+ llgf %r4,__SF_EMPTY(%r15)
/* Get pointer to save area */
- aghi %r1,0x1000
+ lghi %r1,0x1000
/* Store registers */
mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */
@@ -79,17 +74,15 @@
xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
spx __SF_EMPTY(%r15)
- /* Setup lowcore */
- brasl %r14,setup_lowcore_early
+ lghi %r2,0
+ lghi %r3,2*PAGE_SIZE
+ lghi %r5,2*PAGE_SIZE
+1: mvcle %r2,%r4,0
+ jo 1b
/* Save image */
brasl %r14,swsusp_save
- /* Switch on lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- oi __SF_EMPTY+4(%r15),0x10
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Restore prefix register and return */
lghi %r1,0x1000
spx 0x318(%r1)
@@ -117,11 +110,6 @@
/* Deactivate DAT */
stnsm __SF_EMPTY(%r15),0xfb
- /* Switch off lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- ni __SF_EMPTY+4(%r15),0xef
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Set prefix page to zero */
xc __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
spx __SF_EMPTY(%r15)
@@ -175,7 +163,7 @@
/* Load old stack */
lg %r15,0x2f8(%r13)
- /* Pointer to save arae */
+ /* Pointer to save area */
lghi %r13,0x1000
#ifdef CONFIG_SMP
@@ -187,11 +175,6 @@
/* Restore prefix register */
spx 0x318(%r13)
- /* Switch on lowcore protection */
- stctg %c0,%c0,__SF_EMPTY(%r15)
- oi __SF_EMPTY+4(%r15),0x10
- lctlg %c0,%c0,__SF_EMPTY(%r15)
-
/* Activate DAT */
stosm __SF_EMPTY(%r15),0x04
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5..39224b5 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@
select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
the kernel command line option to toggle back and forth.
-config DEBUG_BOOTMEM
- depends on DEBUG_KERNEL
- bool "Debug BOOTMEM initialization"
-
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7ffd1b43..b9c88cc 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -547,7 +547,7 @@
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}
-device_initcall(ap325rxa_devices_setup);
+arch_initcall(ap325rxa_devices_setup);
/* Return the board specific boot mode pin configuration */
static int ap325rxa_mode_pins(void)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f70f4644..f9b2e4d 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -608,7 +608,7 @@
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
-__initcall(migor_devices_setup);
+arch_initcall(migor_devices_setup);
/* Return the board specific boot mode pin configuration */
static int migor_mode_pins(void)
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a332..1804556 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@
unsigned short se7206_inw(unsigned long port)
{
- return *port2adr(port);;
+ return *port2adr(port);
}
void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd..8fed45a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,10 +19,13 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
@@ -272,6 +275,62 @@
},
};
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+ [0] = {
+ .start = SH_ETH_ADDR,
+ .end = SH_ETH_ADDR + 0x1FC,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 91,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+ .phy = 0x1f, /* SMSC LAN8187 */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "sh-eth",
+ .id = 0,
+ .dev = {
+ .platform_data = &sh_eth_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+ [0] = {
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh7724_usb0_host_data,
+ },
+ .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
+ .resource = sh7724_usb0_host_resources,
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -280,11 +339,62 @@
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &sh_eth_device,
+ &sh7724_usb0_host_device,
};
+#define EEPROM_OP 0xBA206000
+#define EEPROM_ADR 0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+ int t = 10000;
+
+ while (t--) {
+ if (!ctrl_inw(EEPROM_STAT))
+ return 1;
+ cpu_relax();
+ }
+
+ printk(KERN_ERR "ms7724se can not access to eeprom\n");
+ return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+ int i;
+ u16 mac[3];
+
+ /* check EEPROM status */
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ /* read MAC addr from EEPROM */
+ for (i = 0 ; i < 3 ; i++) {
+ ctrl_outw(0x0, EEPROM_OP); /* read */
+ ctrl_outw(i*2, EEPROM_ADR);
+ ctrl_outw(0x1, EEPROM_STRT);
+ if (!sh_eth_is_eeprom_ready())
+ return;
+
+ mac[i] = ctrl_inw(EEPROM_DATA);
+ mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ }
+
+ /* reset sh-eth */
+ ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+ /* set MAC addr */
+ ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+ ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
#define SW41_A 0x0100
#define SW41_B 0x0200
@@ -294,6 +404,7 @@
#define SW41_F 0x2000
#define SW41_G 0x4000
#define SW41_H 0x8000
+
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -302,9 +413,16 @@
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
- (1 << 12)), /* USB0 */
+ (1 << 12) | /* USB0 */
+ (1 << 14)), /* RMII */
FPGA_OUT);
+ /* turn on USB clocks, use external clock */
+ ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+ /* enable USB0 port */
+ ctrl_outw(0x0600, 0xa40501d4);
+
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -374,7 +492,7 @@
gpio_request(GPIO_FN_VIO0_CLK, NULL);
gpio_request(GPIO_FN_VIO0_FLD, NULL);
gpio_request(GPIO_FN_VIO0_HD, NULL);
- platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
/* enable CEU1 */
gpio_request(GPIO_FN_VIO1_D7, NULL);
@@ -389,7 +507,7 @@
gpio_request(GPIO_FN_VIO1_HD, NULL);
gpio_request(GPIO_FN_VIO1_VD, NULL);
gpio_request(GPIO_FN_VIO1_CLK, NULL);
- platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+ platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
@@ -404,6 +522,28 @@
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
+ /*
+ * enable SH-Eth
+ *
+ * please remove J33 pin from your board !!
+ *
+ * ms7724 board should not use GPIO_FN_LNKSTA pin
+ * So, This time PTX5 is set to input pin
+ */
+ gpio_request(GPIO_FN_RMII_RXD0, NULL);
+ gpio_request(GPIO_FN_RMII_RXD1, NULL);
+ gpio_request(GPIO_FN_RMII_TXD0, NULL);
+ gpio_request(GPIO_FN_RMII_TXD1, NULL);
+ gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+ gpio_request(GPIO_FN_RMII_TX_EN, NULL);
+ gpio_request(GPIO_FN_RMII_RX_ER, NULL);
+ gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
+ gpio_request(GPIO_FN_MDIO, NULL);
+ gpio_request(GPIO_FN_MDC, NULL);
+ gpio_request(GPIO_PTX5, NULL);
+ gpio_direction_input(GPIO_PTX5);
+ sh_eth_init();
+
if (sw & SW41_B) {
/* SVGA */
lcdc_info.ch[0].lcd_cfg.xres = 800;
@@ -437,7 +577,7 @@
}
return platform_add_devices(ms7724se_devices,
- ARRAY_SIZE(ms7724se_devices));
+ ARRAY_SIZE(ms7724se_devices));
}
device_initcall(devices_setup);
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d2..b18cfd3 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
# Bus options
@@ -858,7 +858,35 @@
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -870,6 +898,27 @@
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270..3ee783a0 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -88,10 +91,12 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -584,7 +593,6 @@
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
CONFIG_SMC91X=y
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
@@ -1196,6 +1211,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1260,6 +1276,7 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2..d8e6bb9 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,8 @@
#define __ASM_SH_PERF_COUNTER_H
/* SH only supports software counters through this interface. */
-#define set_perf_counter_pending() do { } while (0)
+static inline void set_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db..63ca37b 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -73,20 +73,12 @@
quicklist_free_page(QUICK_PT, NULL, pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), (pte)); \
} while (0)
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
-
static inline void check_pgt_cache(void)
{
quicklist_trim(QUICK_PGD, NULL, 25, 16);
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc3468..6f83f2c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/err.h>
#include <asm/ptrace.h>
/* The system call number is given by the user in R3 */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac48..d570ac2 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -51,7 +51,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index 9c16f73..da8fe7a 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -91,9 +91,9 @@
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp)
-#define pud_free_tlb(tlb, pudp) pud_free((tlb)->mm, pudp)
+#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)
#define tlb_migrate_finish(mm) do { } while (0)
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b6..29514a3 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
*/
#include <asm/addrspace.h>
+/* SH Eth */
+#define SH_ETH_ADDR (0xA4600000)
+#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
+
#define PA_LED (0xba203000) /* 8bit LED */
#define IRQ_MODE (0xba200010)
#define IRQ0_SR (0xba200014)
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 1379873..8555c05 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -187,7 +187,7 @@
return platform_add_devices(sh7619_devices,
ARRAY_SIZE(sh7619_devices));
}
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 869c2da..b673764 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -238,7 +238,7 @@
return platform_add_devices(mxg_devices,
ARRAY_SIZE(mxg_devices));
}
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index d8febe1..fbde5b7 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -357,7 +357,7 @@
return platform_add_devices(sh7201_devices,
ARRAY_SIZE(sh7201_devices));
}
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 62e3039..d3fd536 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -367,7 +367,7 @@
return platform_add_devices(sh7203_devices,
ARRAY_SIZE(sh7203_devices));
}
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 3e6f3d7..a9ccc5e 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -338,7 +338,7 @@
return platform_add_devices(sh7206_devices,
ARRAY_SIZE(sh7206_devices));
}
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
void __init plat_irq_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 88f742f..c231059 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -222,7 +222,7 @@
return platform_add_devices(sh7705_devices,
ARRAY_SIZE(sh7705_devices));
}
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
static struct platform_device *sh7705_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index c563067..347ab35 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -250,7 +250,7 @@
return platform_add_devices(sh770x_devices,
ARRAY_SIZE(sh770x_devices));
}
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
static struct platform_device *sh770x_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index efa76c8..717e90a 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -226,7 +226,7 @@
return platform_add_devices(sh7710_devices,
ARRAY_SIZE(sh7710_devices));
}
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
static struct platform_device *sh7710_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 5b21077..74d8baa 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -388,7 +388,7 @@
return platform_add_devices(sh7720_devices,
ARRAY_SIZE(sh7720_devices));
}
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
static struct platform_device *sh7720_early_devices[] __initdata = {
&cmt0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 6d088d1..de4827d 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -138,7 +138,7 @@
return platform_add_devices(sh4202_devices,
ARRAY_SIZE(sh4202_devices));
}
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
static struct platform_device *sh4202_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 851672d..1b8b122 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -239,7 +239,7 @@
return platform_add_devices(sh7750_devices,
ARRAY_SIZE(sh7750_devices));
}
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
static struct platform_device *sh7750_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b82251..7fbb7be 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -265,7 +265,7 @@
return platform_add_devices(sh7760_devices,
ARRAY_SIZE(sh7760_devices));
}
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
static struct platform_device *sh7760_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6307e08..ac4d567 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -325,7 +325,7 @@
return platform_add_devices(sh7343_devices,
ARRAY_SIZE(sh7343_devices));
}
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
static struct platform_device *sh7343_early_devices[] __initdata = {
&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index c18f7d0..1a956b1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -318,7 +318,7 @@
return platform_add_devices(sh7366_devices,
ARRAY_SIZE(sh7366_devices));
}
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
static struct platform_device *sh7366_early_devices[] __initdata = {
&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index ea524a2..cda76eb 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -359,7 +359,7 @@
return platform_add_devices(sh7722_devices,
ARRAY_SIZE(sh7722_devices));
}
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
static struct platform_device *sh7722_early_devices[] __initdata = {
&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index e1bb80b..b45dace 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -473,7 +473,7 @@
return platform_add_devices(sh7723_devices,
ARRAY_SIZE(sh7723_devices));
}
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
static struct platform_device *sh7723_early_devices[] __initdata = {
&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index e5ac9eb..a04edaa 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -508,7 +508,7 @@
return platform_add_devices(sh7724_devices,
ARRAY_SIZE(sh7724_devices));
}
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
static struct platform_device *sh7724_early_devices[] __initdata = {
&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f1e0c0d..4659fff 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -314,7 +314,7 @@
return platform_add_devices(sh7763_devices,
ARRAY_SIZE(sh7763_devices));
}
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
static struct platform_device *sh7763_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 1e86209..eead08d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -368,7 +368,7 @@
return platform_add_devices(sh7770_devices,
ARRAY_SIZE(sh7770_devices));
}
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
static struct platform_device *sh7770_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 715e05b..2c901f4 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -256,7 +256,7 @@
return platform_add_devices(sh7780_devices,
ARRAY_SIZE(sh7780_devices));
}
-__initcall(sh7780_devices_setup);
+arch_initcall(sh7780_devices_setup);
static struct platform_device *sh7780_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index af56140..7f6c718 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -263,7 +263,7 @@
return platform_add_devices(sh7785_devices,
ARRAY_SIZE(sh7785_devices));
}
-__initcall(sh7785_devices_setup);
+arch_initcall(sh7785_devices_setup);
static struct platform_device *sh7785_early_devices[] __initdata = {
&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index b700494..0104a8e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -547,7 +547,7 @@
return platform_add_devices(sh7786_devices,
ARRAY_SIZE(sh7786_devices));
}
-device_initcall(sh7786_devices_setup);
+arch_initcall(sh7786_devices_setup);
void __init plat_early_device_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 53c65fd..07f0789 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -256,7 +256,7 @@
return platform_add_devices(shx3_devices,
ARRAY_SIZE(shx3_devices));
}
-__initcall(shx3_devices_setup);
+arch_initcall(shx3_devices_setup);
void __init plat_early_device_setup(void)
{
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index f5ff1ac..6a0f82f 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -186,7 +186,7 @@
return platform_add_devices(sh5_devices,
ARRAY_SIZE(sh5_devices));
}
-__initcall(sh5_devices_setup);
+arch_initcall(sh5_devices_setup);
void __init plat_early_device_setup(void)
{
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbd..7192594 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
#include <asm/io_trapped.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+ int ret = 0;
+
+#ifdef CONFIG_KPROBES
+ if (!user_mode(regs)) {
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
+ ret = 1;
+ preempt_enable();
+ }
+#endif
+
+ return ret;
+}
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
@@ -87,14 +103,17 @@
return;
}
- /* Only enable interrupts if they were on before the fault */
- if ((regs->sr & SR_IMASK) != SR_IMASK) {
- trace_hardirqs_on();
- local_irq_enable();
- }
-
mm = tsk->mm;
+ if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+ return;
+
+ /* Only enable interrupts if they were on before the fault */
+ if ((regs->sr & SR_IMASK) != SR_IMASK)
+ local_irq_enable();
+
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@@ -141,10 +160,15 @@
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
up_read(&mm->mmap_sem);
return;
@@ -245,22 +269,6 @@
goto no_context;
}
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
- int ret = 0;
-
-#ifdef CONFIG_KPROBES
- if (!user_mode(regs)) {
- preempt_disable();
- if (kprobe_running() && kprobe_fault_handler(regs, trap))
- ret = 1;
- preempt_enable();
- }
-#endif
-
- return ret;
-}
-
/*
* Called with interrupts disabled.
*/
@@ -273,12 +281,7 @@
pmd_t *pmd;
pte_t *pte;
pte_t entry;
- int ret = 0;
-
- if (notify_page_fault(regs, lookup_exception_vector()))
- goto out;
-
- ret = 1;
+ int ret = 1;
/*
* We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 7fbfd5a..17cb7c3 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -18,7 +18,6 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <asm/system.h>
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e1..3ce40ea 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/perf_counter.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -115,6 +116,8 @@
/* Not an IO address, so reenable interrupts */
local_irq_enable();
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@@ -195,10 +198,16 @@
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+
+ if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
- else
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+ regs, address);
+ } else {
tsk->min_flt++;
+ perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+ regs, address);
+ }
/* If we get here, the page fault has been handled. Do the TLB refill
now from the newly-setup PTE, to avoid having to fault again right
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8..1ff0fd9 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@
ifeq ($(CONFIG_SPARC32),y)
quiet_cmd_piggy = PIGGY $@
- cmd_piggy = $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+ cmd_piggy = $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
quiet_cmd_btfix = BTFIX $@
cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
quiet_cmd_sysmap = SYSMAP $(obj)/System.map
@@ -58,7 +58,7 @@
$(obj)/zImage: $(obj)/image
$(call if_changed,strip)
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@@ -79,7 +79,7 @@
$(call if_changed,strip)
@echo ' kernel: $@ is ready'
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@echo ' kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c..e8dc9ad 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@
int main(int argc,char **argv)
{
static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
- unsigned char buffer[1024], *q, *r;
+ char buffer[1024], *q, *r;
unsigned int i, j, k, start, end, offset;
FILE *map;
struct stat s;
@@ -84,7 +84,7 @@
while (fgets (buffer, 1024, map)) {
if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
start = strtoul (buffer, NULL, 16);
- else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+ else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
end = strtoul (buffer, NULL, 16);
}
fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bf..c63fd1b 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@
struct stat s;
int image, tail;
+ start = end = 0;
if (stat (argv[3], &s) < 0) die (argv[3]);
map = fopen (argv[2], "r");
if (!map) die(argv[2]);
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d..ca2b344 100644
--- a/arch/sparc/include/asm/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -44,8 +44,8 @@
BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
#define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd)
-#define pmd_free(mm, pmd) free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define pmd_free(mm, pmd) free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd)
BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE)
@@ -62,7 +62,7 @@
#define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte)
BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
#endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 0f7b0e5..844d73a 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -54,8 +54,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#define INIT_THREAD_INFO(tsk) \
{ \
@@ -64,7 +62,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 6586572..1b45a7b 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -125,8 +125,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -135,7 +133,7 @@
.task = &tsk, \
.flags = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT, \
.exec_domain = &default_exec_domain, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ee38e73..dca406b 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -100,9 +100,9 @@
}
#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr)
#define tlb_migrate_finish(mm) do { } while (0)
#define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd07505..f0ee790 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/bootmem.h>
#include <linux/irq.h>
#include <asm/ptrace.h>
@@ -914,25 +913,19 @@
tb->nonresum_qmask);
}
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size. The base real address must be aligned to the size of the
+ * region. Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
{
unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
+ unsigned long order = get_order(size);
+ unsigned long p;
+
+ p = __get_free_pages(GFP_KERNEL, order);
if (!p) {
- prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
- prom_halt();
- }
-
- *pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
-{
- unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
-
- if (!p) {
- prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+ prom_printf("SUN4V: Error, cannot allocate queue.\n");
prom_halt();
}
@@ -942,11 +935,11 @@
static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
{
#ifdef CONFIG_SMP
- void *page;
+ unsigned long page;
BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
- page = alloc_bootmem_pages(PAGE_SIZE);
+ page = get_zeroed_page(GFP_KERNEL);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
prom_halt();
@@ -965,13 +958,13 @@
for_each_possible_cpu(cpu) {
struct trap_per_cpu *tb = &trap_block[cpu];
- alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
- alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
- alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
- alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
- alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
- alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
- tb->nonresum_qmask);
+ alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+ alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+ alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+ alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+ tb->nonresum_qmask);
}
}
@@ -999,7 +992,7 @@
kill_prom_timer();
size = sizeof(struct ino_bucket) * NUM_IVECS;
- ivector_table = alloc_bootmem(size);
+ ivector_table = kzalloc(size, GFP_KERNEL);
if (!ivector_table) {
prom_printf("Fatal error, cannot allocate ivector_table\n");
prom_halt();
diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c
index 8ce6285..7e3dfd9 100644
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -16,7 +16,6 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/regset.h>
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index a941c61..4ae91dc 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -17,7 +17,6 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/security.h>
#include <linux/seccomp.h>
#include <linux/audit.h>
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 5c12e79..da1218e 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -11,7 +11,6 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 3582833..c0490c7 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/kdebug.h>
#include <asm/delay.h>
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 753d128..c28c714 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -224,7 +224,12 @@
if (!strcmp(type, "domain-services-port"))
bus_id_name = "ds";
- if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
+ /*
+ * 20 char is the old driver-core name size limit, which is no more.
+ * This check can probably be removed after review and possible
+ * adaption of the vio users name length handling.
+ */
+ if (strlen(bus_id_name) >= 20 - 4) {
printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
bus_id_name);
return NULL;
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec1756..dd2aadc 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7..e376284 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708..378de4b 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@
}
static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
BUG();
}
static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
BUG();
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
index 7189843..32c8ce4 100644
--- a/arch/um/include/asm/pgalloc.h
+++ b/arch/um/include/asm/pgalloc.h
@@ -40,7 +40,7 @@
__free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) \
+#define __pte_free_tlb(tlb,pte, address) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb),(pte)); \
@@ -53,7 +53,7 @@
free_page((unsigned long)pmd);
}
-#define __pmd_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x))
+#define __pmd_free_tlb(tlb,x, address) tlb_remove_page((tlb),virt_to_page(x))
#endif
#define check_pgt_cache() do { } while (0)
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 62274ab..fd911f8 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -32,7 +32,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h
index 5240fa1..660caed 100644
--- a/arch/um/include/asm/tlb.h
+++ b/arch/um/include/asm/tlb.h
@@ -116,11 +116,11 @@
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
-#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
-#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr)
-#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
#define tlb_migrate_finish(mm) do {} while (0)
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0..0960de5 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@
if (kstack_end(stack))
break;
if (i && ((i % 8) == 0))
- printk("\n" KERN_INFO " ");
- printk("%08lx ", *stack++);
+ printk(KERN_INFO " ");
+ printk(KERN_CONT "%08lx ", *stack++);
}
show_trace(task, esp);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef..13ffa5d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,6 +24,7 @@
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_PERF_COUNTERS if (!M386 && !M486)
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -742,7 +743,6 @@
config X86_LOCAL_APIC
def_bool y
depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
- select HAVE_PERF_COUNTERS if (!M386 && !M486)
config X86_IO_APIC
def_bool y
@@ -1913,25 +1913,26 @@
recommended you say N here while the DMAR code remains
experimental.
-config DMAR_GFX_WA
- def_bool y
- prompt "Support for Graphics workaround"
+config DMAR_BROKEN_GFX_WA
+ def_bool n
+ prompt "Workaround broken graphics drivers (going away soon)"
depends on DMAR
---help---
Current Graphics drivers tend to use physical address
for DMA and avoid using DMA APIs. Setting this config
option permits the IOMMU driver to set a unity map for
all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA.
+ to use physical addresses for DMA, at least until this
+ option is removed in the 2.6.32 kernel.
config DMAR_FLOPPY_WA
def_bool y
depends on DMAR
---help---
- Floppy disk drivers are know to bypass DMA API calls
+ Floppy disk drivers are known to bypass DMA API calls
thereby failing to work when IOMMU is enabled. This
workaround will setup a 1:1 mapping for the first
- 16M to make floppy (an ISA device) work.
+ 16MiB to make floppy (an ISA device) work.
config INTR_REMAP
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be4..49e0c18 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@
ireg.al = mode; /* AH=0x00 Set Video Mode */
intcall(0x10, &ireg, NULL);
-
ireg.ah = 0x0f; /* Get Current Video Mode */
intcall(0x10, &ireg, &oreg);
do_restore = 1; /* Assume video contents were lost */
/* Not all BIOSes are clean with the top bit */
- new_mode = ireg.al & 0x7f;
+ new_mode = oreg.al & 0x7f;
if (new_mode == mode)
return 0; /* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147..275dd17 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@
ireg.di = (size_t)&vginfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f ||
+ if (oreg.ax != 0x004f ||
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
@@ -70,7 +70,7 @@
ireg.di = (size_t)&vminfo;
intcall(0x10, &ireg, &oreg);
- if (ireg.ax != 0x004f)
+ if (oreg.ax != 0x004f)
continue;
if ((vminfo.mode_attr & 0x15) == 0x05) {
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e..dc5a667 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -28,7 +31,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -200,8 +206,15 @@
return atomic_add_return(-i, v);
}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is already a given value
@@ -250,45 +263,12 @@
/* An 64bit atomic type */
typedef struct {
- unsigned long long counter;
+ u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(val) { (val) }
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr) ((ptr)->counter)
-
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
- asm volatile(
-
- LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
- : "=A" (old)
-
- : [ptr] "D" (ptr),
- "A" (old),
- "b" (ll_low(new)),
- "c" (ll_high(new))
-
- : "memory");
-
- return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
- unsigned long long new_val)
-{
- return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
/**
* atomic64_xchg - xchg atomic64 variable
@@ -298,18 +278,7 @@
* Atomically xchgs the value of @ptr to @new_val and returns
* the old value.
*/
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
- unsigned long long old_val;
-
- do {
- old_val = atomic_read(ptr);
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
/**
* atomic64_set - set atomic64 variable
@@ -318,10 +287,7 @@
*
* Atomically sets the value of @ptr to @new_val.
*/
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
- atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
/**
* atomic64_read - read atomic64 variable
@@ -329,17 +295,30 @@
*
* Atomically reads the value of @ptr and returns it.
*/
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
+static inline u64 atomic64_read(atomic64_t *ptr)
{
- unsigned long long curr_val;
+ u64 res;
- do {
- curr_val = __atomic64_read(ptr);
- } while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
+ /*
+ * Note, we inline this atomic64_t primitive because
+ * it only clobbers EAX/EDX and leaves the others
+ * untouched. We also (somewhat subtly) rely on the
+ * fact that cmpxchg8b returns the current 64-bit value
+ * of the memory location we are touching:
+ */
+ asm volatile(
+ "mov %%ebx, %%eax\n\t"
+ "mov %%ecx, %%edx\n\t"
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "=&A" (res)
+ : "m" (*ptr)
+ );
- return curr_val;
+ return res;
}
+extern u64 atomic64_read(atomic64_t *ptr);
+
/**
* atomic64_add_return - add and return
* @delta: integer value to add
@@ -347,34 +326,14 @@
*
* Atomically adds @delta to @ptr and returns @delta + *@ptr
*/
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val, new_val;
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
- do {
- old_val = atomic_read(ptr);
- new_val = old_val + delta;
-
- } while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
- return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
- return atomic64_add_return(-delta, ptr);
-}
-
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
- return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
- return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
/**
* atomic64_add - add integer to atomic64 variable
@@ -383,10 +342,7 @@
*
* Atomically adds @delta to @ptr.
*/
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub - subtract the atomic64 variable
@@ -395,10 +351,7 @@
*
* Atomically subtracts @delta from @ptr.
*/
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
- atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
/**
* atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +362,7 @@
* true if the result is zero, or false for all
* other cases.
*/
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
- unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
- return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
/**
* atomic64_inc - increment atomic64 variable
@@ -423,10 +370,7 @@
*
* Atomically increments @ptr by 1.
*/
-static inline void atomic64_inc(atomic64_t *ptr)
-{
- atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
/**
* atomic64_dec - decrement atomic64 variable
@@ -434,10 +378,7 @@
*
* Atomically decrements @ptr by 1.
*/
-static inline void atomic64_dec(atomic64_t *ptr)
-{
- atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
/**
* atomic64_dec_and_test - decrement and test
@@ -447,10 +388,7 @@
* returns true if the result is 0, or false for all other
* cases.
*/
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
/**
* atomic64_inc_and_test - increment and test
@@ -460,10 +398,7 @@
* and returns true if the result is zero, or false for all
* other cases.
*/
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
- return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
/**
* atomic64_add_negative - add and test if negative
@@ -474,13 +409,7 @@
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
- long long old_val = atomic64_add_return(delta, ptr);
-
- return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
#include <asm-generic/atomic-long.h>
#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d63602..d605dc2 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
*
* Atomically reads the value of @v.
*/
-#define atomic_read(v) ((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
/**
* atomic_set - set atomic variable
@@ -27,7 +30,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic_set(v, i) (((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
/**
* atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@
* Atomically reads the value of @v.
* Doesn't imply a read memory barrier.
*/
-#define atomic64_read(v) ((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+ return v->counter;
+}
/**
* atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic64_set(v, i) (((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+ v->counter = i;
+}
/**
* atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@
#define atomic64_inc_return(v) (atomic64_add_return(1, (v)))
#define atomic64_dec_return(v) (atomic64_sub_return(1, (v)))
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+ return xchg(&v->counter, new);
+}
+
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+ return xchg(&v->counter, new);
+}
/**
* atomic_add_unless - add unless the number is a given value
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632..7a10659 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
#ifdef __KERNEL__
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
& ~(CONFIG_PHYSICAL_ALIGN - 1))
/* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
#else
-#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT + THREAD_ORDER)
#endif
#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index edc90f2..8406ed7 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,7 +33,7 @@
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-#define efi_ioremap(addr, size) ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
#else /* !CONFIG_X86_32 */
@@ -84,7 +84,8 @@
efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+ u32 type);
#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3..7b2d71d 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,12 +111,9 @@
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
- FIX_TEXT_POKE0, /* reserve 2 pages for text_poke() */
- FIX_TEXT_POKE1,
+ FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */
+ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- FIX_OHCI1394_BASE,
-#endif
/*
* 256 temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
@@ -129,6 +126,9 @@
FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
(__end_of_permanent_fixed_addresses & 255),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ FIX_OHCI1394_BASE,
+#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index daf866e..330ee80 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -161,6 +161,7 @@
struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
+extern void ioapic_insert_resources(void);
extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
@@ -180,6 +181,7 @@
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
static inline void ioapic_init_mappings(void) { }
+static inline void ioapic_insert_resources(void) { }
static inline void probe_nr_irqs_gsi(void) { }
#endif
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 2bdab21..c6ccbe7 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -12,9 +12,15 @@
{
unsigned long flags;
+ /*
+ * Note: this needs to be "=r" not "=rm", because we have the
+ * stack offset from what gcc expects at the time the "pop" is
+ * executed, and so a memory reference with respect to the stack
+ * would end up using the wrong address.
+ */
asm volatile("# __raw_save_flags\n\t"
"pushf ; pop %0"
- : "=g" (flags)
+ : "=r" (flags)
: /* no input */
: "memory");
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389c..5136dad 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,7 @@
/* Pages for switcher itself, then two pages per cpu */
#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
#ifdef CONFIG_X86_PAE
#define SWITCHER_ADDR 0xFFE00000
#else
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index d31c4a6..ba0eed8 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,27 +30,27 @@
#include <asm/hw_irq.h>
#include <asm/kvm_para.h>
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi. If a return value makes sense, it's returned in %eax.
*
* Grossly invalid calls result in Sudden Death at the hands of the vengeful
* Host, rather than returning failure. This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
/* Can't use our min() macro here: needs to be a constant */
#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
#define LHCALL_RING_SIZE 64
struct hcall_args {
- /* These map directly onto eax, ebx, ecx, edx and esi
- * in struct lguest_regs */
+ /* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
unsigned long arg0, arg1, arg2, arg3, arg4;
};
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5..6be7fc2 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38)
#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39)
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0 0x00000186
-#define MSR_P6_EVNTSEL1 0x00000187
-
/* P4/Xeon+ specific */
#define MSR_IA32_MCG_EAX 0x00000180
#define MSR_IA32_MCG_EBX 0x00000181
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c972644..c86e5ed4 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@
int lapic_watchdog_init(unsigned nmi_hz);
int lapic_wd_event(unsigned nmi_hz);
unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
void disable_lapic_nmi_watchdog(void);
void enable_lapic_nmi_watchdog(void);
void stop_nmi(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d..1ff685c 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30..103f1dd 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
#else /* ...!ASSEMBLY */
+#include <linux/kernel.h>
#include <linux/stringify.h>
#ifdef CONFIG_SMP
@@ -155,6 +156,15 @@
/* We can use this directly for local CPU (faster). */
DECLARE_PER_CPU(unsigned long, this_cpu_off);
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+ return NULL;
+}
+#endif
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e1..fa64e40 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@
#ifdef CONFIG_PERF_COUNTERS
extern void init_hw_perf_counters(void);
extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET 0
+
#else
static inline void init_hw_perf_counters(void) { }
static inline void perf_counters_lapic_init(void) { }
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index dd14c54..0e8c2a0 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -46,7 +46,13 @@
__free_page(pte);
}
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address)
+{
+ ___pte_free_tlb(tlb, pte);
+}
static inline void pmd_populate_kernel(struct mm_struct *mm,
pmd_t *pmd, pte_t *pte)
@@ -78,7 +84,13 @@
free_page((unsigned long)pmd);
}
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long adddress)
+{
+ ___pmd_free_tlb(tlb, pmd);
+}
#ifdef CONFIG_X86_PAE
extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
@@ -108,7 +120,14 @@
free_page((unsigned long)pud);
}
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+ unsigned long address)
+{
+ ___pud_free_tlb(tlb, pud);
+}
+
#endif /* PAGETABLE_LEVELS > 3 */
#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ec..621f56d 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
#endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db8..4e77853 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
#endif /* _ASM_X86_SPINLOCK_H */
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944..cf86a5e 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
extern int kstack_depth_to_print;
+int x86_is_stack_id(int id, char *name);
+
/* Generic stack tracer with callbacks */
struct stacktrace_ops {
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b078352..fad7d40 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 20e6a79..d2c6c93 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -212,9 +212,9 @@
: "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
#else
#define __put_user_asm_u64(x, ptr, retval, errret) \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+ __put_user_asm(x, ptr, retval, "q", "", "er", errret)
#define __put_user_asm_ex_u64(x, addr) \
- __put_user_asm_ex(x, addr, "q", "", "Zr")
+ __put_user_asm_ex(x, addr, "q", "", "er")
#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
#endif
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8cc6873..db24b21 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -88,11 +88,11 @@
ret, "l", "k", "ir", 4);
return ret;
case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
case 10:
__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 10);
+ ret, "q", "", "er", 10);
if (unlikely(ret))
return ret;
asm("":::"memory");
@@ -101,12 +101,12 @@
return ret;
case 16:
__put_user_asm(*(u64 *)src, (u64 __user *)dst,
- ret, "q", "", "ir", 16);
+ ret, "q", "", "er", 16);
if (unlikely(ret))
return ret;
asm("":::"memory");
__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
default:
return copy_user_generic((__force void *)dst, src, size);
@@ -157,7 +157,7 @@
ret, "q", "", "=r", 8);
if (likely(!ret))
__put_user_asm(tmp, (u64 __user *)dst,
- ret, "q", "", "ir", 8);
+ ret, "q", "", "er", 8);
return ret;
}
default:
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 341070f..77a6850 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -175,7 +175,7 @@
#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
#define UV_GLOBAL_MMR64_PNODE_BITS(p) \
- ((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+ (((unsigned long)(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
#define UV_APIC_PNODE_SHIFT 6
@@ -327,6 +327,7 @@
unsigned short nr_possible_cpus;
unsigned short nr_online_cpus;
unsigned short pnode;
+ short memory_nid;
};
extern struct uv_blade_info *uv_blade_info;
extern short *uv_node_to_blade;
@@ -363,6 +364,12 @@
return uv_blade_info[bid].pnode;
}
+/* Nid of memory node on blade. -1 if no blade-local memory */
+static inline int uv_blade_to_memory_nid(int bid)
+{
+ return uv_blade_info[bid].memory_nid;
+}
+
/* Determine the number of possible cpus on a blade */
static inline int uv_blade_nr_possible_cpus(int bid)
{
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b8..430d5b2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@
CFLAGS_paravirt.o := $(nostackp)
GCOV_PROFILE_vsyscall_64.o := n
GCOV_PROFILE_hpet.o := n
+GCOV_PROFILE_tsc.o := n
+GCOV_PROFILE_paravirt.o := n
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f04..6c99f50 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@
return 0;
}
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
.notifier_call = device_change_notifier,
};
@@ -1763,7 +1763,7 @@
flag |= __GFP_ZERO;
virt_addr = (void *)__get_free_pages(flag, get_order(size));
if (!virt_addr)
- return 0;
+ return NULL;
paddr = virt_to_phys(virt_addr);
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2acc..c1b17e9 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@
if (iommu->evt_buf == NULL)
return NULL;
+ iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
return iommu->evt_buf;
}
@@ -691,6 +693,7 @@
devid = e->devid;
devid_to = e->ext >> 8;
+ set_dev_entry_from_acpi(iommu, devid , e->flags, 0);
set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
amd_iommu_alias_table[devid] = devid_to;
break;
@@ -749,11 +752,13 @@
devid = e->devid;
for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
- if (alias)
+ if (alias) {
amd_iommu_alias_table[dev_i] = devid_to;
- set_dev_entry_from_acpi(iommu,
- amd_iommu_alias_table[dev_i],
- flags, ext_flags);
+ set_dev_entry_from_acpi(iommu,
+ devid_to, flags, ext_flags);
+ }
+ set_dev_entry_from_acpi(iommu, dev_i,
+ flags, ext_flags);
}
break;
default:
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042..0a1c283 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@
#ifdef CONFIG_X86_X2APIC
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
-static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
if (x2apic_enabled()) {
@@ -149,7 +148,6 @@
return 0;
}
- disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
}
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac..8952a58 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -652,7 +652,8 @@
return ret && es7000_apic_is_cluster();
}
-struct apic apic_es7000_cluster = {
+/* We've been warned by a false positive warning.Use __refdata to keep calm. */
+struct apic __refdata apic_es7000_cluster = {
.name = "es7000",
.probe = probe_es7000,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216f..d2ed6c5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@
return;
}
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
{
- unsigned int v;
- int i, j;
+ int i;
if (apic_verbosity == APIC_QUIET)
return;
- printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
- for (i = 0; i < 8; i++) {
- v = apic_read(base + i*0x10);
- for (j = 0; j < 32; j++) {
- if (v & (1<<j))
- printk("1");
- else
- printk("0");
- }
- printk("\n");
- }
+ printk(KERN_DEBUG);
+
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+ printk(KERN_CONT "\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,7 @@
if (apic_verbosity == APIC_QUIET)
return;
- printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+ printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1780,11 @@
printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
printk(KERN_DEBUG "... APIC ISR field:\n");
- print_APIC_bitfield(APIC_ISR);
+ print_APIC_field(APIC_ISR);
printk(KERN_DEBUG "... APIC TMR field:\n");
- print_APIC_bitfield(APIC_TMR);
+ print_APIC_field(APIC_TMR);
printk(KERN_DEBUG "... APIC IRR field:\n");
- print_APIC_bitfield(APIC_IRR);
+ print_APIC_field(APIC_IRR);
if (APIC_INTEGRATED(ver)) { /* !82489DX */
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
@@ -3799,6 +3793,9 @@
mmr_pnode = uv_blade_to_pnode(mmr_blade);
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+ if (cfg->move_in_progress)
+ send_cleanup_vector(cfg);
+
return irq;
}
@@ -4187,28 +4184,20 @@
}
}
-static int __init ioapic_insert_resources(void)
+void __init ioapic_insert_resources(void)
{
int i;
struct resource *r = ioapic_resources;
if (!r) {
- if (nr_ioapics > 0) {
+ if (nr_ioapics > 0)
printk(KERN_ERR
"IO APIC resources couldn't be allocated.\n");
- return -1;
- }
- return 0;
+ return;
}
for (i = 0; i < nr_ioapics; i++) {
insert_resource(&iomem_resource, r);
r++;
}
-
- return 0;
}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 533e59c..ca96e68 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -493,7 +493,8 @@
(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}
-struct apic apic_numaq = {
+/* Use __refdata to keep false positive warning calm. */
+struct apic __refdata apic_numaq = {
.name = "NUMAQ",
.probe = probe_numaq,
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 8e4cbb2..a5371ec 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -17,11 +17,13 @@
return x2apic_enabled();
}
-/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
static const struct cpumask *x2apic_target_cpus(void)
{
- return cpumask_of(0);
+ return cpu_online_mask;
}
/*
@@ -170,7 +172,7 @@
static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
{
- return current_cpu_data.initial_apicid >> index_msb;
+ return initial_apicid >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index a284359..a8989aa 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -27,11 +27,13 @@
return 0;
}
-/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
static const struct cpumask *x2apic_target_cpus(void)
{
- return cpumask_of(0);
+ return cpu_online_mask;
}
static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
@@ -162,7 +164,7 @@
static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
{
- return current_cpu_data.initial_apicid >> index_msb;
+ return initial_apicid >> index_msb;
}
static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 096d19a..832e908 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -261,7 +261,7 @@
.apic_id_registered = uv_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
- .irq_dest_mode = 1, /* logical */
+ .irq_dest_mode = 0, /* physical */
.target_cpus = uv_target_cpus,
.disable_esr = 0,
@@ -362,12 +362,6 @@
BUG();
}
-static __init void map_low_mmrs(void)
-{
- init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
- init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
-}
-
enum map_type {map_wb, map_uc};
static __init void map_high(char *id, unsigned long base, int shift,
@@ -395,26 +389,6 @@
map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
}
-static __init void map_config_high(int max_pnode)
-{
- union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
- int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
- cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
- if (cfg.s.enable)
- map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmr_high(int max_pnode)
-{
- union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
- int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
- mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
- if (mmr.s.enable)
- map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
-}
-
static __init void map_mmioh_high(int max_pnode)
{
union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
@@ -566,8 +540,6 @@
unsigned long mmr_base, present, paddr;
unsigned short pnode_mask;
- map_low_mmrs();
-
m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
@@ -591,6 +563,8 @@
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kmalloc(bytes, GFP_KERNEL);
BUG_ON(!uv_blade_info);
+ for (blade = 0; blade < uv_num_possible_blades(); blade++)
+ uv_blade_info[blade].memory_nid = -1;
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
@@ -629,6 +603,9 @@
lcpu = uv_blade_info[blade].nr_possible_cpus;
uv_blade_info[blade].nr_possible_cpus++;
+ /* Any node on the blade, else will contain -1. */
+ uv_blade_info[blade].memory_nid = nid;
+
uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
@@ -662,11 +639,10 @@
pnode = (paddr >> m_val) & pnode_mask;
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
+ max_pnode = max(pnode, max_pnode);
}
map_gru_high(max_pnode);
- map_mmr_high(max_pnode);
- map_config_high(max_pnode);
map_mmioh_high(max_pnode);
uv_cpu_init();
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 79302e9..442b550 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -811,7 +811,7 @@
u8 ret = 0;
int idled = 0;
int polling;
- int err;
+ int err = 0;
polling = !!(current_thread_info()->status & TS_POLLING);
if (polling) {
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8..63fddcd0 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@
{
#ifdef CONFIG_X86_HT
unsigned bits;
+ int cpu = smp_processor_id();
bits = c->x86_coreid_bits;
-
/* Low order bits define the core id (index of core in socket) */
c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
/* Convert the initial APIC ID into the socket ID */
c->phys_proc_id = c->initial_apicid >> bits;
+ /* use socket ID also for last level cache */
+ per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
#endif
}
@@ -354,7 +356,7 @@
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
/* check CPU config space for extended APIC ID */
- if (c->x86 >= 0xf) {
+ if (cpu_has_apic && c->x86 >= 0xf) {
unsigned int val;
val = read_pci_config(0, 24, 0, 0x68);
if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
@@ -398,6 +400,13 @@
level = cpuid_eax(1);
if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+ /*
+ * Some BIOSes incorrectly force this feature, but only K8
+ * revision D (model = 0x14) and later actually support it.
+ */
+ if (c->x86_model < 0x14)
+ clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
}
if (c->x86 == 0x10 || c->x86 == 0x11)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4d..5ce60a8 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -59,7 +59,30 @@
alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
}
-static const struct cpu_dev *this_cpu __cpuinitdata;
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_64
+ display_cacheinfo(c);
+#else
+ /* Not much we can do here... */
+ /* Check if at least it has cpuid */
+ if (c->cpuid_level == -1) {
+ /* No cpuid. It must be an ancient CPU */
+ if (c->x86 == 4)
+ strcpy(c->x86_model_id, "486");
+ else if (c->x86 == 3)
+ strcpy(c->x86_model_id, "386");
+ }
+#endif
+}
+
+static const struct cpu_dev __cpuinitconst default_cpu = {
+ .c_init = default_init,
+ .c_vendor = "Unknown",
+ .c_x86_vendor = X86_VENDOR_UNKNOWN,
+};
+
+static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
#ifdef CONFIG_X86_64
@@ -332,29 +355,6 @@
static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {};
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
- display_cacheinfo(c);
-#else
- /* Not much we can do here... */
- /* Check if at least it has cpuid */
- if (c->cpuid_level == -1) {
- /* No cpuid. It must be an ancient CPU */
- if (c->x86 == 4)
- strcpy(c->x86_model_id, "486");
- else if (c->x86 == 3)
- strcpy(c->x86_model_id, "386");
- }
-#endif
-}
-
-static const struct cpu_dev __cpuinitconst default_cpu = {
- .c_init = default_init,
- .c_vendor = "Unknown",
- .c_x86_vendor = X86_VENDOR_UNKNOWN,
-};
-
static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
@@ -848,9 +848,6 @@
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
numa_add_cpu(smp_processor_id());
#endif
-
- /* Cap the iomem address space to what is addressable on all CPUs */
- iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64..2a50ef8 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@
static int transition_fid_vid(struct powernow_k8_data *data,
u32 reqfid, u32 reqvid)
{
- if (core_voltage_pre_transition(data, reqvid))
+ if (core_voltage_pre_transition(data, reqvid, reqfid))
return 1;
if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@
/* Phase 1 - core voltage transition ... setup voltage */
static int core_voltage_pre_transition(struct powernow_k8_data *data,
- u32 reqvid)
+ u32 reqvid, u32 reqfid)
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
- u32 maxvid, lo;
+ u32 maxvid, lo, rvomult = 1;
dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
"reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+ rvomult = 2;
+ rvosteps *= rvomult;
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ while ((rvosteps > 0) &&
+ ((rvomult * data->rvo + data->currvid) > reqvid)) {
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
@@ -384,13 +388,6 @@
u32 vcoreqfid, vcocurrfid, vcofiddiff;
u32 fid_interval, savevid = data->currvid;
- if ((reqfid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
- "0x%x 0x%x\n", reqfid, data->currfid);
- return 1;
- }
-
if (data->currfid == reqfid) {
printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
data->currfid);
@@ -407,6 +404,9 @@
vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
: vcoreqfid - vcocurrfid;
+ if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+ vcofiddiff = 0;
+
while (vcofiddiff > 2) {
(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
@@ -1081,14 +1081,6 @@
return 0;
}
- if ((fid < HI_FID_TABLE_BOTTOM) &&
- (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX
- "ignoring illegal change in lo freq table-%x to 0x%x\n",
- data->currfid, fid);
- return 1;
- }
-
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
freqs.old = find_khz_freq_from_fid(data->currfid);
@@ -1267,7 +1259,7 @@
{
static const char ACPI_PSS_BIOS_BUG_MSG[] =
KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
- KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+ FW_BUG PFX "Try again with latest BIOS.\n";
struct powernow_k8_data *data;
struct init_on_cpu init_on_cpu;
int rc;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190..02ce824 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+ u32 reqvid, u32 regfid);
static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de..1cfb623 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@
m->cs, m->ip);
if (m->cs == __KERNEL_CS)
print_symbol("{%s}", m->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
printk(KERN_EMERG "TSC %llx ", m->tsc);
if (m->addr)
- printk("ADDR %llx ", m->addr);
+ printk(KERN_CONT "ADDR %llx ", m->addr);
if (m->misc)
- printk("MISC %llx ", m->misc);
- printk("\n");
+ printk(KERN_CONT "MISC %llx ", m->misc);
+ printk(KERN_CONT "\n");
printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid,
m->apicid);
@@ -209,13 +209,13 @@
static void print_mce_head(void)
{
- printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+ printk(KERN_EMERG "\nHARDWARE ERROR\n");
}
static void print_mce_tail(void)
{
printk(KERN_EMERG "This is not a software problem!\n"
- KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+ "Run through mcelog --ascii to decode and contact your hardware vendor\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -1117,7 +1117,7 @@
*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
t->expires = jiffies + *n;
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@
return;
setup_timer(t, mcheck_timer, smp_processor_id());
t->expires = round_jiffies(jiffies + *n);
- add_timer(t);
+ add_timer_on(t, smp_processor_id());
}
/*
@@ -1692,17 +1692,15 @@
const char *buf, size_t siz)
{
char *p;
- int len;
strncpy(mce_helper, buf, sizeof(mce_helper));
mce_helper[sizeof(mce_helper)-1] = 0;
- len = strlen(mce_helper);
p = strchr(mce_helper, '\n');
- if (*p)
+ if (p)
*p = 0;
- return len;
+ return strlen(mce_helper) + !!p;
}
static ssize_t set_ignore_ce(struct sys_device *s,
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index bff8dd1..8bc64cf 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -36,6 +36,7 @@
static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+static DEFINE_PER_CPU(bool, thermal_throttle_active);
static atomic_t therm_throt_en = ATOMIC_INIT(0);
@@ -96,24 +97,27 @@
{
unsigned int cpu = smp_processor_id();
__u64 tmp_jiffs = get_jiffies_64();
+ bool was_throttled = __get_cpu_var(thermal_throttle_active);
+ bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
- if (curr)
+ if (is_throttled)
__get_cpu_var(thermal_throttle_count)++;
- if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+ if (!(was_throttled ^ is_throttled) &&
+ time_before64(tmp_jiffs, __get_cpu_var(next_check)))
return 0;
__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
/* if we just entered the thermal event */
- if (curr) {
+ if (is_throttled) {
printk(KERN_CRIT "CPU%d: Temperature above threshold, "
- "cpu clock throttled (total events = %lu)\n", cpu,
- __get_cpu_var(thermal_throttle_count));
+ "cpu clock throttled (total events = %lu)\n",
+ cpu, __get_cpu_var(thermal_throttle_count));
add_taint(TAINT_MACHINE_CHECK);
- } else {
- printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+ } else if (was_throttled) {
+ printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
}
return 1;
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef2..900332b 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -55,6 +55,7 @@
int num_counters_fixed;
int counter_bits;
u64 counter_mask;
+ int apic;
u64 max_period;
u64 intel_ctrl;
};
@@ -66,6 +67,52 @@
};
/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0079,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e,
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x012e,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
+ [PERF_COUNT_HW_BUS_CYCLES] = 0x0062,
+};
+
+static u64 p6_pmu_event_map(int event)
+{
+ return p6_perfmon_event_map[event];
+}
+
+/*
+ * Counter setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_COUNTER 0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 event)
+{
+#define P6_EVNTSEL_EVENT_MASK 0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK 0x00040000ULL
+#define P6_EVNTSEL_INV_MASK 0x00800000ULL
+#define P6_EVNTSEL_COUNTER_MASK 0xFF000000ULL
+
+#define P6_EVNTSEL_MASK \
+ (P6_EVNTSEL_EVENT_MASK | \
+ P6_EVNTSEL_UNIT_MASK | \
+ P6_EVNTSEL_EDGE_MASK | \
+ P6_EVNTSEL_INV_MASK | \
+ P6_EVNTSEL_COUNTER_MASK)
+
+ return event & P6_EVNTSEL_MASK;
+}
+
+
+/*
* Intel PerfMon v3. Used on Core2 and later.
*/
static const u64 intel_perfmon_event_map[] =
@@ -401,7 +448,7 @@
[ C(RESULT_MISS) ] = 0x0041, /* Data Cache Misses */
},
[ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+ [ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
[ C(RESULT_MISS) ] = 0,
},
[ C(OP_PREFETCH) ] = {
@@ -567,6 +614,7 @@
static bool reserve_pmc_hardware(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
int i;
if (nmi_watchdog == NMI_LOCAL_APIC)
@@ -581,9 +629,11 @@
if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
goto eventsel_fail;
}
+#endif
return true;
+#ifdef CONFIG_X86_LOCAL_APIC
eventsel_fail:
for (i--; i >= 0; i--)
release_evntsel_nmi(x86_pmu.eventsel + i);
@@ -598,10 +648,12 @@
enable_lapic_nmi_watchdog();
return false;
+#endif
}
static void release_pmc_hardware(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
int i;
for (i = 0; i < x86_pmu.num_counters; i++) {
@@ -611,6 +663,7 @@
if (nmi_watchdog == NMI_LOCAL_APIC)
enable_lapic_nmi_watchdog();
+#endif
}
static void hw_perf_counter_destroy(struct perf_counter *counter)
@@ -666,6 +719,7 @@
{
struct perf_counter_attr *attr = &counter->attr;
struct hw_perf_counter *hwc = &counter->hw;
+ u64 config;
int err;
if (!x86_pmu_initialized())
@@ -701,6 +755,15 @@
hwc->sample_period = x86_pmu.max_period;
hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
+ } else {
+ /*
+ * If we have a PMU initialized but no APIC
+ * interrupts, we cannot sample hardware
+ * counters (user-space has to fall back and
+ * sample via a hrtimer based software counter):
+ */
+ if (!x86_pmu.apic)
+ return -EOPNOTSUPP;
}
counter->destroy = hw_perf_counter_destroy;
@@ -718,14 +781,40 @@
if (attr->config >= x86_pmu.max_events)
return -EINVAL;
+
/*
* The generic map:
*/
- hwc->config |= x86_pmu.event_map(attr->config);
+ config = x86_pmu.event_map(attr->config);
+
+ if (config == 0)
+ return -ENOENT;
+
+ if (config == -1LL)
+ return -EINVAL;
+
+ hwc->config |= config;
return 0;
}
+static void p6_pmu_disable_all(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ if (!cpuc->enabled)
+ return;
+
+ cpuc->enabled = 0;
+ barrier();
+
+ /* p6 only has one enable register */
+ rdmsrl(MSR_P6_EVNTSEL0, val);
+ val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
static void intel_pmu_disable_all(void)
{
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
@@ -767,6 +856,23 @@
return x86_pmu.disable_all();
}
+static void p6_pmu_enable_all(void)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ unsigned long val;
+
+ if (cpuc->enabled)
+ return;
+
+ cpuc->enabled = 1;
+ barrier();
+
+ /* p6 only has one enable register */
+ rdmsrl(MSR_P6_EVNTSEL0, val);
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
static void intel_pmu_enable_all(void)
{
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
@@ -784,13 +890,13 @@
barrier();
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ struct perf_counter *counter = cpuc->counters[idx];
u64 val;
if (!test_bit(idx, cpuc->active_mask))
continue;
- rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
- if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
- continue;
+
+ val = counter->hw.config;
val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
}
@@ -819,16 +925,13 @@
static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
- int err;
- err = checking_wrmsrl(hwc->config_base + idx,
+ (void)checking_wrmsrl(hwc->config_base + idx,
hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
}
static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
{
- int err;
- err = checking_wrmsrl(hwc->config_base + idx,
- hwc->config);
+ (void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
}
static inline void
@@ -836,13 +939,24 @@
{
int idx = __idx - X86_PMC_IDX_FIXED;
u64 ctrl_val, mask;
- int err;
mask = 0xfULL << (idx * 4);
rdmsrl(hwc->config_base, ctrl_val);
ctrl_val &= ~mask;
- err = checking_wrmsrl(hwc->config_base, ctrl_val);
+ (void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val = P6_NOP_COUNTER;
+
+ if (cpuc->enabled)
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+ (void)checking_wrmsrl(hwc->config_base + idx, val);
}
static inline void
@@ -912,6 +1026,8 @@
err = checking_wrmsrl(hwc->counter_base + idx,
(u64)(-left) & x86_pmu.counter_mask);
+ perf_counter_update_userpage(counter);
+
return ret;
}
@@ -941,6 +1057,19 @@
err = checking_wrmsrl(hwc->config_base, ctrl_val);
}
+static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+ struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+ u64 val;
+
+ val = hwc->config;
+ if (cpuc->enabled)
+ val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+ (void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+
static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
{
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
@@ -957,8 +1086,6 @@
if (cpuc->enabled)
x86_pmu_enable_counter(hwc, idx);
- else
- x86_pmu_disable_counter(hwc, idx);
}
static int
@@ -969,13 +1096,6 @@
if (!x86_pmu.num_counters_fixed)
return -1;
- /*
- * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
- */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86_model == 28)
- return -1;
-
event = hwc->config & ARCH_PERFMON_EVENT_MASK;
if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1161,8 @@
x86_perf_counter_set_period(counter, hwc, idx);
x86_pmu.enable(hwc, idx);
+ perf_counter_update_userpage(counter);
+
return 0;
}
@@ -1133,6 +1255,8 @@
x86_perf_counter_update(counter, hwc, idx);
cpuc->counters[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
+
+ perf_counter_update_userpage(counter);
}
/*
@@ -1177,6 +1301,49 @@
local_irq_restore(flags);
}
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+ struct perf_sample_data data;
+ struct cpu_hw_counters *cpuc;
+ struct perf_counter *counter;
+ struct hw_perf_counter *hwc;
+ int idx, handled = 0;
+ u64 val;
+
+ data.regs = regs;
+ data.addr = 0;
+
+ cpuc = &__get_cpu_var(cpu_hw_counters);
+
+ for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ counter = cpuc->counters[idx];
+ hwc = &counter->hw;
+
+ val = x86_perf_counter_update(counter, hwc, idx);
+ if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+ continue;
+
+ /*
+ * counter overflow
+ */
+ handled = 1;
+ data.period = counter->hw.last_period;
+
+ if (!x86_perf_counter_set_period(counter, hwc, idx))
+ continue;
+
+ if (perf_counter_overflow(counter, 1, &data))
+ p6_pmu_disable_counter(hwc, idx);
+ }
+
+ if (handled)
+ inc_irq_stat(apic_perf_irqs);
+
+ return handled;
+}
/*
* This handler is triggered by the local APIC, so the APIC IRQ handling
@@ -1186,14 +1353,13 @@
{
struct perf_sample_data data;
struct cpu_hw_counters *cpuc;
- int bit, cpu, loops;
+ int bit, loops;
u64 ack, status;
data.regs = regs;
data.addr = 0;
- cpu = smp_processor_id();
- cpuc = &per_cpu(cpu_hw_counters, cpu);
+ cpuc = &__get_cpu_var(cpu_hw_counters);
perf_disable();
status = intel_pmu_get_status();
@@ -1250,14 +1416,13 @@
struct cpu_hw_counters *cpuc;
struct perf_counter *counter;
struct hw_perf_counter *hwc;
- int cpu, idx, handled = 0;
+ int idx, handled = 0;
u64 val;
data.regs = regs;
data.addr = 0;
- cpu = smp_processor_id();
- cpuc = &per_cpu(cpu_hw_counters, cpu);
+ cpuc = &__get_cpu_var(cpu_hw_counters);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
if (!test_bit(idx, cpuc->active_mask))
@@ -1300,18 +1465,22 @@
void set_perf_counter_pending(void)
{
+#ifdef CONFIG_X86_LOCAL_APIC
apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+#endif
}
void perf_counters_lapic_init(void)
{
- if (!x86_pmu_initialized())
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (!x86_pmu.apic || !x86_pmu_initialized())
return;
/*
* Always use NMI for PMU
*/
apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
}
static int __kprobes
@@ -1335,7 +1504,9 @@
regs = args->regs;
+#ifdef CONFIG_X86_LOCAL_APIC
apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
/*
* Can't rely on the handled return value to say it was our NMI, two
* counters could trigger 'simultaneously' raising two back-to-back NMIs.
@@ -1354,6 +1525,33 @@
.priority = 1
};
+static struct x86_pmu p6_pmu = {
+ .name = "p6",
+ .handle_irq = p6_pmu_handle_irq,
+ .disable_all = p6_pmu_disable_all,
+ .enable_all = p6_pmu_enable_all,
+ .enable = p6_pmu_enable_counter,
+ .disable = p6_pmu_disable_counter,
+ .eventsel = MSR_P6_EVNTSEL0,
+ .perfctr = MSR_P6_PERFCTR0,
+ .event_map = p6_pmu_event_map,
+ .raw_event = p6_pmu_raw_event,
+ .max_events = ARRAY_SIZE(p6_perfmon_event_map),
+ .apic = 1,
+ .max_period = (1ULL << 31) - 1,
+ .version = 0,
+ .num_counters = 2,
+ /*
+ * Counters have 40 bits implemented. However they are designed such
+ * that bits [32-39] are sign extensions of bit 31. As such the
+ * effective width of a counter for P6-like PMU is 32 bits only.
+ *
+ * See IA-32 Intel Architecture Software developer manual Vol 3B
+ */
+ .counter_bits = 32,
+ .counter_mask = (1ULL << 32) - 1,
+};
+
static struct x86_pmu intel_pmu = {
.name = "Intel",
.handle_irq = intel_pmu_handle_irq,
@@ -1366,6 +1564,7 @@
.event_map = intel_pmu_event_map,
.raw_event = intel_pmu_raw_event,
.max_events = ARRAY_SIZE(intel_perfmon_event_map),
+ .apic = 1,
/*
* Intel PMCs cannot be accessed sanely above 32 bit width,
* so we install an artificial 1<<31 period regardless of
@@ -1389,10 +1588,43 @@
.num_counters = 4,
.counter_bits = 48,
.counter_mask = (1ULL << 48) - 1,
+ .apic = 1,
/* use highest bit to detect overflow */
.max_period = (1ULL << 47) - 1,
};
+static int p6_pmu_init(void)
+{
+ switch (boot_cpu_data.x86_model) {
+ case 1:
+ case 3: /* Pentium Pro */
+ case 5:
+ case 6: /* Pentium II */
+ case 7:
+ case 8:
+ case 11: /* Pentium III */
+ break;
+ case 9:
+ case 13:
+ /* Pentium M */
+ break;
+ default:
+ pr_cont("unsupported p6 CPU model %d ",
+ boot_cpu_data.x86_model);
+ return -ENODEV;
+ }
+
+ x86_pmu = p6_pmu;
+
+ if (!cpu_has_apic) {
+ pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
+ pr_info("no hardware sampling interrupt available.\n");
+ x86_pmu.apic = 0;
+ }
+
+ return 0;
+}
+
static int intel_pmu_init(void)
{
union cpuid10_edx edx;
@@ -1401,8 +1633,14 @@
unsigned int ebx;
int version;
- if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ /* check for P6 processor family */
+ if (boot_cpu_data.x86 == 6) {
+ return p6_pmu_init();
+ } else {
return -ENODEV;
+ }
+ }
/*
* Check whether the Architectural PerfMon supports
@@ -1428,8 +1666,6 @@
*/
x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
- rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
/*
* Install the hw-cache-events table:
*/
@@ -1499,21 +1735,22 @@
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
- x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+ x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
}
perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
perf_max_counters = x86_pmu.num_counters;
if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
- x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+ x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
}
perf_counter_mask |=
((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+ x86_pmu.intel_ctrl = perf_counter_mask;
perf_counters_lapic_init();
register_die_notifier(&perf_counter_nmi_notifier);
@@ -1563,6 +1800,7 @@
static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
static void
@@ -1578,7 +1816,9 @@
static int backtrace_stack(void *data, char *name)
{
- /* Process all stacks: */
+ per_cpu(in_nmi_frame, smp_processor_id()) =
+ x86_is_stack_id(NMI_STACK, name);
+
return 0;
}
@@ -1586,6 +1826,9 @@
{
struct perf_callchain_entry *entry = data;
+ if (per_cpu(in_nmi_frame, smp_processor_id()))
+ return;
+
if (reliable)
callchain_store(entry, addr);
}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6..e60ed74 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@
wd_ops->rearm(wd, nmi_hz);
return 1;
}
-
-int lapic_watchdog_ok(void)
-{
- return wd_ops != NULL;
-}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa..c8405718 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
#include "dumpstack.h"
int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
unsigned int code_bytes = 64;
int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
static int die_counter;
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1..bca5fba 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
#include "dumpstack.h"
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+ return 0;
+}
+
void dump_trace(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp,
const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db59..54b0a32 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
#include "dumpstack.h"
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
- unsigned *usedp, char **idp)
-{
- static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
[DEBUG_STACK - 1] = "#DB",
[NMI_STACK - 1] = "NMI",
[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@
N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
#endif
};
+
+int x86_is_stack_id(int id, char *name)
+{
+ return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+ unsigned *usedp, char **idp)
+{
unsigned k;
/*
@@ -61,7 +68,7 @@
if (*usedp & (1U << k))
break;
*usedp |= 1U << k;
- *idp = ids[k];
+ *idp = x86_stack_ids[k];
return (unsigned long *)end;
}
/*
@@ -81,12 +88,13 @@
do {
++j;
end -= EXCEPTION_STKSZ;
- ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+ x86_stack_ids[j][4] = '1' +
+ (j - N_EXCEPTION_STACKS);
} while (stack < end - EXCEPTION_STKSZ);
if (*usedp & (1U << j))
break;
*usedp |= 1U << j;
- *idp = ids[j];
+ *idp = x86_stack_ids[j];
return (unsigned long *)end;
}
#endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa3..5cb5725 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
+ printk(KERN_ERR
+ "PCI: Warning: Cannot find a gap in the 32bit address range\n"
+ "PCI: Unassigned devices with 32bit resource registers may break!\n");
}
#endif
@@ -1383,6 +1382,8 @@
return 32*1024*1024;
}
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
void __init e820_reserve_resources_late(void)
{
int i;
@@ -1400,17 +1401,19 @@
* avoid stolen RAM:
*/
for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *entry = &e820_saved.map[i];
- resource_size_t start, end;
+ struct e820entry *entry = &e820.map[i];
+ u64 start, end;
if (entry->type != E820_RAM)
continue;
start = entry->addr + entry->size;
- end = round_up(start, ram_alignment(start));
- if (start == end)
+ end = round_up(start, ram_alignment(start)) - 1;
+ if (end > MAX_RESOURCE_SIZE)
+ end = MAX_RESOURCE_SIZE;
+ if (start >= end)
continue;
- reserve_region_with_split(&iomem_resource, start,
- end - 1, "RAM buffer");
+ reserve_region_with_split(&iomem_resource, start, end,
+ "RAM buffer");
}
}
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 96f7ac0..fe26ba3 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -354,7 +354,7 @@
*/
c16 = tmp = early_ioremap(efi.systab->fw_vendor, 2);
if (c16) {
- for (i = 0; i < sizeof(vendor) && *c16; ++i)
+ for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i)
vendor[i] = *c16++;
vendor[i] = '\0';
} else
@@ -512,7 +512,7 @@
&& end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
else
- va = efi_ioremap(md->phys_addr, size);
+ va = efi_ioremap(md->phys_addr, size, md->type);
md->virt_addr = (u64) (unsigned long) va;
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 22c3b78..ac0621a 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -98,10 +98,14 @@
early_runtime_code_mapping_set_exec(0);
}
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+ u32 type)
{
unsigned long last_map_pfn;
+ if (type == EFI_MEMORY_MAPPED_IO)
+ return ioremap(phys_addr, size);
+
last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
return NULL;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 8663afb..0d98a01 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -602,7 +602,11 @@
#endif
iret
-.section .cpuinit.data,"wa"
+#ifndef CONFIG_HOTPLUG_CPU
+ __CPUINITDATA
+#else
+ __REFDATA
+#endif
.align 4
ENTRY(initial_code)
.long i386_start_kernel
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e4..92b7703 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -187,7 +187,7 @@
#ifdef CONFIG_X86_THERMAL_VECTOR
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
#endif
#if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad..c664d51 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@
state->mode = paravirt_get_lazy_mode();
}
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
{
pv_info.name = "KVM";
pv_info.paravirt_enabled = 1;
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 846510b..2a62d84 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -347,7 +347,7 @@
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
.name = "mfgpt-timer"
};
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 4763047..1a041bc 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
+#endif
if (!strncmp(p, "pt", 2)) {
iommu_pass_through = 1;
return 1;
}
-#endif
gart_parse_options(p);
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f90..d2e56b8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@
nommu:
/* Should not happen anymore */
printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_WARNING "falling back to iommu=soft.\n");
+ "falling back to iommu=soft.\n");
return -1;
}
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 4f9c55f..03801f2 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -60,7 +60,7 @@
"adc %5,%%edx ; "
: "=A" (product), "=r" (tmp1), "=r" (tmp2)
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
+#elif defined(__x86_64__)
__asm__ (
"mul %%rdx ; shrd $32,%%rdx,%%rax"
: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8..a06e8d1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -3,6 +3,7 @@
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/efi.h>
+#include <linux/dmi.h>
#include <acpi/reboot.h>
#include <asm/io.h>
#include <asm/apic.h>
@@ -17,7 +18,6 @@
#include <asm/cpu.h>
#ifdef CONFIG_X86_32
-# include <linux/dmi.h>
# include <linux/ctype.h>
# include <linux/mc146818rtc.h>
#else
@@ -249,6 +249,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
},
},
+ { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+ .callback = set_bios_reboot,
+ .ident = "CompuLab SBC-FITPC2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+ },
+ },
{ }
};
@@ -396,6 +404,46 @@
#endif /* CONFIG_X86_32 */
+/*
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+ if (reboot_type != BOOT_CF9) {
+ reboot_type = BOOT_CF9;
+ printk(KERN_INFO "%s series board detected. "
+ "Selecting PCI-method for reboots.\n", d->ident);
+ }
+ return 0;
+}
+
+static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
+ { /* Handle problems with rebooting on Apple MacBook5 */
+ .callback = set_pci_reboot,
+ .ident = "Apple MacBook5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
+ },
+ },
+ { /* Handle problems with rebooting on Apple MacBookPro5 */
+ .callback = set_pci_reboot,
+ .ident = "Apple MacBookPro5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
+ },
+ },
+ { }
+};
+
+static int __init pci_reboot_init(void)
+{
+ dmi_check_system(pci_reboot_dmi_table);
+ return 0;
+}
+core_initcall(pci_reboot_init);
+
static inline void kb_wait(void)
{
int i;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80..63f32d2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@
return ret;
}
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+ if (direct_gbpages && cpu_has_gbpages)
+ printk(KERN_INFO "Using GB pages for direct mapping\n");
+ else
+ direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
static void __init reserve_brk(void)
{
if (_brk_end > _brk_start)
@@ -658,6 +672,19 @@
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
+ {
+ /*
+ * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+ * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+ * match only DMI_BOARD_NAME and see if there is more bad products
+ * with this vendor.
+ */
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+ },
+ },
#endif
{}
};
@@ -871,6 +898,8 @@
reserve_brk();
+ init_gbpages();
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f082..29a3eef 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@
}
/*
- * Remap allocator
+ * Large page remap allocator
*
* This allocator uses PMD page as unit. A PMD page is allocated for
* each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,105 +137,185 @@
* better than only using 4k mappings while still being NUMA friendly.
*/
#ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+struct pcpul_ent {
+ unsigned int cpu;
+ void *ptr;
+};
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
+static struct vm_struct pcpul_vm;
+
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
{
size_t off = (size_t)pageno << PAGE_SHIFT;
- if (off >= pcpur_size)
+ if (off >= pcpul_size)
return NULL;
- return virt_to_page(pcpur_ptrs[cpu] + off);
+ return virt_to_page(pcpul_map[cpu].ptr + off);
}
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
- static struct vm_struct vm;
- size_t ptrs_size, dyn_size;
+ size_t map_size, dyn_size;
unsigned int cpu;
+ int i, j;
ssize_t ret;
- /*
- * If large page isn't supported, there's no benefit in doing
- * this. Also, on non-NUMA, embedding is better.
- *
- * NOTE: disabled for now.
- */
- if (true || !cpu_has_pse || !pcpu_need_numa())
+ if (!chosen) {
+ size_t vm_size = VMALLOC_END - VMALLOC_START;
+ size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+ /* on non-NUMA, embedding is better */
+ if (!pcpu_need_numa())
+ return -EINVAL;
+
+ /* don't consume more than 20% of vmalloc area */
+ if (tot_size > vm_size / 5) {
+ pr_info("PERCPU: too large chunk size %zuMB for "
+ "large page remap\n", tot_size >> 20);
+ return -EINVAL;
+ }
+ }
+
+ /* need PSE */
+ if (!cpu_has_pse) {
+ pr_warning("PERCPU: lpage allocator requires PSE\n");
return -EINVAL;
+ }
/*
* Currently supports only single page. Supporting multiple
* pages won't be too difficult if it ever becomes necessary.
*/
- pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+ pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
PERCPU_DYNAMIC_RESERVE);
- if (pcpur_size > PMD_SIZE) {
+ if (pcpul_size > PMD_SIZE) {
pr_warning("PERCPU: static data is larger than large page, "
"can't use large page\n");
return -EINVAL;
}
- dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+ dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
/* allocate pointer array and alloc large pages */
- ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
- pcpur_ptrs = alloc_bootmem(ptrs_size);
+ map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+ pcpul_map = alloc_bootmem(map_size);
for_each_possible_cpu(cpu) {
- pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
- if (!pcpur_ptrs[cpu])
+ pcpul_map[cpu].cpu = cpu;
+ pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+ PMD_SIZE);
+ if (!pcpul_map[cpu].ptr) {
+ pr_warning("PERCPU: failed to allocate large page "
+ "for cpu%u\n", cpu);
goto enomem;
+ }
/*
- * Only use pcpur_size bytes and give back the rest.
+ * Only use pcpul_size bytes and give back the rest.
*
* Ingo: The 2MB up-rounding bootmem is needed to make
* sure the partial 2MB page is still fully RAM - it's
* not well-specified to have a PAT-incompatible area
* (unmapped RAM, device memory, etc.) in that hole.
*/
- free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
- PMD_SIZE - pcpur_size);
+ free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
+ PMD_SIZE - pcpul_size);
- memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+ memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
}
/* allocate address and map */
- vm.flags = VM_ALLOC;
- vm.size = num_possible_cpus() * PMD_SIZE;
- vm_area_register_early(&vm, PMD_SIZE);
+ pcpul_vm.flags = VM_ALLOC;
+ pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+ vm_area_register_early(&pcpul_vm, PMD_SIZE);
for_each_possible_cpu(cpu) {
- pmd_t *pmd;
+ pmd_t *pmd, pmd_v;
- pmd = populate_extra_pmd((unsigned long)vm.addr
- + cpu * PMD_SIZE);
- set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
- PAGE_KERNEL_LARGE));
+ pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+ cpu * PMD_SIZE);
+ pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+ PAGE_KERNEL_LARGE);
+ set_pmd(pmd, pmd_v);
}
/* we're ready, commit */
pr_info("PERCPU: Remapped at %p with large pages, static data "
- "%zu bytes\n", vm.addr, static_size);
+ "%zu bytes\n", pcpul_vm.addr, static_size);
- ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+ ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
- PMD_SIZE, vm.addr, NULL);
- goto out_free_ar;
+ PMD_SIZE, pcpul_vm.addr, NULL);
+
+ /* sort pcpul_map array for pcpu_lpage_remapped() */
+ for (i = 0; i < num_possible_cpus() - 1; i++)
+ for (j = i + 1; j < num_possible_cpus(); j++)
+ if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+ struct pcpul_ent tmp = pcpul_map[i];
+ pcpul_map[i] = pcpul_map[j];
+ pcpul_map[j] = tmp;
+ }
+
+ return ret;
enomem:
for_each_possible_cpu(cpu)
- if (pcpur_ptrs[cpu])
- free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
- ret = -ENOMEM;
-out_free_ar:
- free_bootmem(__pa(pcpur_ptrs), ptrs_size);
- return ret;
+ if (pcpul_map[cpu].ptr)
+ free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
+ free_bootmem(__pa(pcpul_map), map_size);
+ return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area. This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+ void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+ unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+ int left = 0, right = num_possible_cpus() - 1;
+ int pos;
+
+ /* pcpul in use at all? */
+ if (!pcpul_map)
+ return NULL;
+
+ /* okay, perform binary search */
+ while (left <= right) {
+ pos = (left + right) / 2;
+
+ if (pcpul_map[pos].ptr < pmd_addr)
+ left = pos + 1;
+ else if (pcpul_map[pos].ptr > pmd_addr)
+ right = pos - 1;
+ else {
+ /* it shouldn't be in the area for the first chunk */
+ WARN_ON(offset < pcpul_size);
+
+ return pcpul_vm.addr +
+ pcpul_map[pos].cpu * PMD_SIZE + offset;
+ }
+ }
+
+ return NULL;
}
#else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
{
return -EINVAL;
}
@@ -249,7 +329,7 @@
* mapping so that it can use PMD mapping without additional TLB
* pressure.
*/
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
{
size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
@@ -258,7 +338,7 @@
* this. Also, embedding allocation doesn't play well with
* NUMA.
*/
- if (!cpu_has_pse || pcpu_need_numa())
+ if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
return -EINVAL;
return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -308,8 +388,11 @@
void *ptr;
ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
- if (!ptr)
+ if (!ptr) {
+ pr_warning("PERCPU: failed to allocate "
+ "4k page for cpu%u\n", cpu);
goto enomem;
+ }
memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -333,6 +416,16 @@
return ret;
}
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+ strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+ return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
static inline void setup_percpu_segment(int cpu)
{
#ifdef CONFIG_X86_32
@@ -346,11 +439,6 @@
#endif
}
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
void __init setup_per_cpu_areas(void)
{
size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -367,9 +455,26 @@
* of large page mappings. Please read comments on top of
* each allocator for details.
*/
- ret = setup_pcpu_remap(static_size);
- if (ret < 0)
- ret = setup_pcpu_embed(static_size);
+ ret = -EINVAL;
+ if (strlen(pcpu_chosen_alloc)) {
+ if (strcmp(pcpu_chosen_alloc, "4k")) {
+ if (!strcmp(pcpu_chosen_alloc, "lpage"))
+ ret = setup_pcpu_lpage(static_size, true);
+ else if (!strcmp(pcpu_chosen_alloc, "embed"))
+ ret = setup_pcpu_embed(static_size, true);
+ else
+ pr_warning("PERCPU: unknown allocator %s "
+ "specified\n", pcpu_chosen_alloc);
+ if (ret < 0)
+ pr_warning("PERCPU: %s allocator failed (%zd), "
+ "falling back to 4k\n",
+ pcpu_chosen_alloc, ret);
+ }
+ } else {
+ ret = setup_pcpu_lpage(static_size, false);
+ if (ret < 0)
+ ret = setup_pcpu_embed(static_size, false);
+ }
if (ret < 0)
ret = setup_pcpu_4k(static_size);
if (ret < 0)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c..8ccabb8 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@
unsigned long pa;
unsigned long m;
unsigned long n;
- unsigned long mmr_image;
struct bau_desc *adp;
struct bau_desc *ad2;
@@ -727,12 +726,8 @@
n = pa >> uv_nshift;
m = pa & uv_mmask;
- mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
- if (mmr_image) {
- uv_write_global_mmr64(pnode, (unsigned long)
- UVH_LB_BAU_SB_DESCRIPTOR_BASE,
- (n << UV_DESC_BASE_PNODE_SHIFT | m));
- }
+ uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+ (n << UV_DESC_BASE_PNODE_SHIFT | m));
/*
* initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5..5204332 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@
printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
show_registers(regs);
+ if (panic_on_io_nmi)
+ panic("NMI IOCK error: Not continuing");
+
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 6e1a368..71f4368 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -275,15 +275,20 @@
* use the TSC value at the transitions to calculate a pretty
* good value for the TSC frequencty.
*/
+static inline int pit_verify_msb(unsigned char val)
+{
+ /* Ignore LSB */
+ inb(0x42);
+ return inb(0x42) == val;
+}
+
static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
{
int count;
u64 tsc = 0;
for (count = 0; count < 50000; count++) {
- /* Ignore LSB */
- inb(0x42);
- if (inb(0x42) != val)
+ if (!pit_verify_msb(val))
break;
tsc = get_cycles();
}
@@ -336,8 +341,7 @@
* to do that is to just read back the 16-bit counter
* once from the PIT.
*/
- inb(0x42);
- inb(0x42);
+ pit_verify_msb(0);
if (pit_expect_msb(0xff, &tsc, &d1)) {
for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
@@ -348,8 +352,19 @@
* Iterate until the error is less than 500 ppm
*/
delta -= tsc;
- if (d1+d2 < delta >> 11)
- goto success;
+ if (d1+d2 >= delta >> 11)
+ continue;
+
+ /*
+ * Check the PIT one more time to verify that
+ * all TSC reads were stable wrt the PIT.
+ *
+ * This also guarantees serialization of the
+ * last cycle read ('d2') in pit_expect_msb.
+ */
+ if (!pit_verify_msb(0xfe - i))
+ break;
+ goto success;
}
}
printk("Fast TSC calibration failed\n");
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b263423..95a7289 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -441,7 +441,7 @@
ap.ds = __USER_DS;
ap.es = __USER_DS;
ap.fs = __KERNEL_PERCPU;
- ap.gs = 0;
+ ap.gs = __KERNEL_STACK_CANARY;
ap.eflags = 0;
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e878..78d185d 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -112,11 +112,6 @@
_sdata = .;
DATA_DATA
CONSTRUCTORS
-
-#ifdef CONFIG_X86_64
- /* End of data section */
- _edata = .;
-#endif
} :data
#ifdef CONFIG_X86_32
@@ -156,10 +151,8 @@
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
-#ifdef CONFIG_X86_32
/* End of data section */
_edata = .;
-#endif
}
#ifdef CONFIG_X86_64
@@ -400,8 +393,8 @@
#ifdef CONFIG_X86_32
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE");
#else
/*
* Per-cpu symbols which need to be offset from __per_cpu_load
@@ -414,12 +407,12 @@
/*
* Build-time check on the image size:
*/
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE");
#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
- "irq_stack_union is not at start of per-cpu area");
+. = ASSERT((per_cpu__irq_stack_union == 0),
+ "irq_stack_union is not at start of per-cpu area");
#endif
#endif /* CONFIG_X86_32 */
@@ -427,7 +420,7 @@
#ifdef CONFIG_KEXEC
#include <asm/kexec.h>
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
+. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big");
#endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4d6f0d2..21f68e0 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -104,6 +104,9 @@
ktime_t remaining;
struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
+ if (!ps->pit_timer.period)
+ return 0;
+
/*
* The Counter does not stop when it reaches zero. In
* Modes 0, 1, 4, and 5 the Counter ``wraps around'' to
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e8..0ef5bb2 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -489,16 +489,20 @@
*
* If rmapp bit zero is one, (then rmap & ~1) points to a struct kvm_rmap_desc
* containing more mappings.
+ *
+ * Returns the number of rmap entries before the spte was added or zero if
+ * the spte was not added.
+ *
*/
-static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
{
struct kvm_mmu_page *sp;
struct kvm_rmap_desc *desc;
unsigned long *rmapp;
- int i;
+ int i, count = 0;
if (!is_rmap_pte(*spte))
- return;
+ return count;
gfn = unalias_gfn(vcpu->kvm, gfn);
sp = page_header(__pa(spte));
sp->gfns[spte - sp->spt] = gfn;
@@ -515,8 +519,10 @@
} else {
rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
- while (desc->shadow_ptes[RMAP_EXT-1] && desc->more)
+ while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
desc = desc->more;
+ count += RMAP_EXT;
+ }
if (desc->shadow_ptes[RMAP_EXT-1]) {
desc->more = mmu_alloc_rmap_desc(vcpu);
desc = desc->more;
@@ -525,6 +531,7 @@
;
desc->shadow_ptes[i] = spte;
}
+ return count;
}
static void rmap_desc_remove_entry(unsigned long *rmapp,
@@ -754,6 +761,19 @@
return young;
}
+#define RMAP_RECYCLE_THRESHOLD 1000
+
+static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+{
+ unsigned long *rmapp;
+
+ gfn = unalias_gfn(vcpu->kvm, gfn);
+ rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+
+ kvm_unmap_rmapp(vcpu->kvm, rmapp);
+ kvm_flush_remote_tlbs(vcpu->kvm);
+}
+
int kvm_age_hva(struct kvm *kvm, unsigned long hva)
{
return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
@@ -1407,24 +1427,25 @@
*/
void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
{
+ int used_pages;
+
+ used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages;
+ used_pages = max(0, used_pages);
+
/*
* If we set the number of mmu pages to be smaller be than the
* number of actived pages , we must to free some mmu pages before we
* change the value
*/
- if ((kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages) >
- kvm_nr_mmu_pages) {
- int n_used_mmu_pages = kvm->arch.n_alloc_mmu_pages
- - kvm->arch.n_free_mmu_pages;
-
- while (n_used_mmu_pages > kvm_nr_mmu_pages) {
+ if (used_pages > kvm_nr_mmu_pages) {
+ while (used_pages > kvm_nr_mmu_pages) {
struct kvm_mmu_page *page;
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(kvm, page);
- n_used_mmu_pages--;
+ used_pages--;
}
kvm->arch.n_free_mmu_pages = 0;
}
@@ -1740,6 +1761,7 @@
{
int was_rmapped = 0;
int was_writeble = is_writeble_pte(*shadow_pte);
+ int rmap_count;
pgprintk("%s: spte %llx access %x write_fault %d"
" user_fault %d gfn %lx\n",
@@ -1781,9 +1803,11 @@
page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
if (!was_rmapped) {
- rmap_add(vcpu, shadow_pte, gfn, largepage);
+ rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
if (!is_rmap_pte(*shadow_pte))
kvm_release_pfn_clean(pfn);
+ if (rmap_count > RMAP_RECYCLE_THRESHOLD)
+ rmap_recycle(vcpu, gfn, largepage);
} else {
if (was_writeble)
kvm_release_pfn_dirty(pfn);
@@ -2157,7 +2181,7 @@
else
/* 32 bits PSE 4MB page */
context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT32E_ROOT_LEVEL:
context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2194,7 @@
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 62) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
case PT64_ROOT_LEVEL:
context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2210,7 @@
context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
rsvd_bits(maxphyaddr, 51) |
rsvd_bits(13, 20); /* large page */
- context->rsvd_bits_mask[1][0] = ~0ull;
+ context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
break;
}
}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e459..67785f6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@
{
unsigned access = gw->pt_access;
struct kvm_mmu_page *shadow_page;
- u64 spte, *sptep;
+ u64 spte, *sptep = NULL;
int direct;
gfn_t table_gfn;
int r;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 71510e0..b1f658a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -711,6 +711,7 @@
svm->vmcb->control.tsc_offset += delta;
vcpu->cpu = cpu;
kvm_migrate_timers(vcpu);
+ svm->asid_generation = 0;
}
for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
@@ -1031,7 +1032,6 @@
svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
}
- svm->vcpu.cpu = svm_data->cpu;
svm->asid_generation = svm_data->asid_generation;
svm->vmcb->control.asid = svm_data->next_asid++;
}
@@ -2300,8 +2300,8 @@
struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING;
- if (svm->vcpu.cpu != cpu ||
- svm->asid_generation != svm_data->asid_generation)
+ /* FIXME: handle wraparound of asid_generation */
+ if (svm->asid_generation != svm_data->asid_generation)
new_asid(svm, svm_data);
}
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf3..29f9129 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@
return 1;
}
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
+}
+
static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
{
unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3151,8 +3157,8 @@
struct vcpu_vmx *vmx = to_vmx(vcpu);
enum emulation_result err = EMULATE_DONE;
- preempt_enable();
local_irq_enable();
+ preempt_enable();
while (!guest_state_valid(vcpu)) {
err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
@@ -3162,7 +3168,7 @@
if (err != EMULATE_DONE) {
kvm_report_emulation_failure(vcpu, "emulation failure");
- return;
+ break;
}
if (signal_pending(current))
@@ -3171,8 +3177,8 @@
schedule();
}
- local_irq_disable();
preempt_disable();
+ local_irq_disable();
vmx->invalid_state_emulation_result = err;
}
@@ -3198,6 +3204,15 @@
[EXIT_REASON_HLT] = handle_halt,
[EXIT_REASON_INVLPG] = handle_invlpg,
[EXIT_REASON_VMCALL] = handle_vmcall,
+ [EXIT_REASON_VMCLEAR] = handle_vmx_insn,
+ [EXIT_REASON_VMLAUNCH] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRLD] = handle_vmx_insn,
+ [EXIT_REASON_VMPTRST] = handle_vmx_insn,
+ [EXIT_REASON_VMREAD] = handle_vmx_insn,
+ [EXIT_REASON_VMRESUME] = handle_vmx_insn,
+ [EXIT_REASON_VMWRITE] = handle_vmx_insn,
+ [EXIT_REASON_VMOFF] = handle_vmx_insn,
+ [EXIT_REASON_VMON] = handle_vmx_insn,
[EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f..3d45290 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -704,11 +704,48 @@
return false;
}
+static bool valid_pat_type(unsigned t)
+{
+ return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */
+}
+
+static bool valid_mtrr_type(unsigned t)
+{
+ return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */
+}
+
+static bool mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+ int i;
+
+ if (!msr_mtrr_valid(msr))
+ return false;
+
+ if (msr == MSR_IA32_CR_PAT) {
+ for (i = 0; i < 8; i++)
+ if (!valid_pat_type((data >> (i * 8)) & 0xff))
+ return false;
+ return true;
+ } else if (msr == MSR_MTRRdefType) {
+ if (data & ~0xcff)
+ return false;
+ return valid_mtrr_type(data & 0xff);
+ } else if (msr >= MSR_MTRRfix64K_00000 && msr <= MSR_MTRRfix4K_F8000) {
+ for (i = 0; i < 8 ; i++)
+ if (!valid_mtrr_type((data >> (i * 8)) & 0xff))
+ return false;
+ return true;
+ }
+
+ /* variable MTRRs */
+ return valid_mtrr_type(data & 0xff);
+}
+
static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
u64 *p = (u64 *)&vcpu->arch.mtrr_state.fixed_ranges;
- if (!msr_mtrr_valid(msr))
+ if (!mtrr_valid(vcpu, msr, data))
return 1;
if (msr == MSR_MTRRdefType) {
@@ -898,6 +935,7 @@
case MSR_VM_HSAVE_PA:
case MSR_P6_EVNTSEL0:
case MSR_P6_EVNTSEL1:
+ case MSR_K7_EVNTSEL0:
data = 0;
break;
case MSR_MTRRcap:
@@ -1078,14 +1116,13 @@
if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
goto out;
r = -E2BIG;
- if (n < num_msrs_to_save)
+ if (n < msr_list.nmsrs)
goto out;
r = -EFAULT;
if (copy_to_user(user_msr_list->indices, &msrs_to_save,
num_msrs_to_save * sizeof(u32)))
goto out;
- if (copy_to_user(user_msr_list->indices
- + num_msrs_to_save * sizeof(u32),
+ if (copy_to_user(user_msr_list->indices + num_msrs_to_save,
&emulated_msrs,
ARRAY_SIZE(emulated_msrs) * sizeof(u32)))
goto out;
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c23..616de46 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@
return 0;
}
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
{
u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
/*
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 7bc65f0..d677fa9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -22,7 +22,8 @@
*
* So how does the kernel know it's a Guest? We'll see that later, but let's
* just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
/*
* Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -74,7 +75,8 @@
*
* The Guest in our tale is a simple creature: identical to the Host but
* behaving in simplified but equivalent ways. In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
struct lguest_data lguest_data = {
.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
@@ -85,7 +87,8 @@
.syscall_vec = SYSCALL_VECTOR,
};
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
* do a normal hypercall. Each entry in the ring has 5 slots for the hypercall
* arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -94,7 +97,8 @@
* If we come around to a slot which hasn't been finished, then the table is
* full and we just make the hypercall directly. This has the nice side
* effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
static void async_hcall(unsigned long call, unsigned long arg1,
unsigned long arg2, unsigned long arg3,
unsigned long arg4)
@@ -103,9 +107,11 @@
static unsigned int next_call;
unsigned long flags;
- /* Disable interrupts if not already disabled: we don't want an
+ /*
+ * Disable interrupts if not already disabled: we don't want an
* interrupt handler making a hypercall while we're already doing
- * one! */
+ * one!
+ */
local_irq_save(flags);
if (lguest_data.hcall_status[next_call] != 0xFF) {
/* Table full, so do normal hcall which will flush table. */
@@ -125,8 +131,9 @@
local_irq_restore(flags);
}
-/*G:035 Notice the lazy_hcall() above, rather than hcall(). This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall(). This is our first real
+ * optimization trick!
*
* When lazy_mode is set, it means we're allowed to defer all hypercalls and do
* them as a batch when lazy_mode is eventually turned off. Because hypercalls
@@ -136,7 +143,8 @@
* lguest_leave_lazy_mode().
*
* So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
static void lazy_hcall1(unsigned long call,
unsigned long arg1)
{
@@ -146,6 +154,7 @@
async_hcall(call, arg1, 0, 0, 0);
}
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
static void lazy_hcall2(unsigned long call,
unsigned long arg1,
unsigned long arg2)
@@ -181,8 +190,10 @@
}
#endif
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
static void lguest_leave_lazy_mmu_mode(void)
{
kvm_hypercall0(LHCALL_FLUSH_ASYNC);
@@ -208,9 +219,11 @@
* check there before it tries to deliver an interrupt.
*/
-/* save_flags() is expected to return the processor state (ie. "flags"). The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags"). The
* flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag. Our "save_flags()" just returns that. */
+ * about the interrupt flag. Our "save_flags()" just returns that.
+ */
static unsigned long save_fl(void)
{
return lguest_data.irq_enabled;
@@ -222,13 +235,15 @@
lguest_data.irq_enabled = 0;
}
-/* Let's pause a moment. Remember how I said these are called so often?
+/*
+ * Let's pause a moment. Remember how I said these are called so often?
* Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
* break some rules. In particular, these functions are assumed to save their
* own registers if they need to: normal C functions assume they can trash the
* eax register. To use normal C functions, we use
* PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
PV_CALLEE_SAVE_REGS_THUNK(save_fl);
PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
/*:*/
@@ -237,18 +252,18 @@
extern void lg_irq_enable(void);
extern void lg_restore_fl(unsigned long flags);
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt). This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch. One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled. There will then be a page fault as soon as
+ * interrupts are re-enabled.
*
* A better method is to implement soft interrupt disable generally for x86:
* instead of disabling interrupts, we set a flag. If an interrupt does come
* in, we then disable them for real. This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
/*G:034
* The Interrupt Descriptor Table (IDT).
@@ -261,10 +276,12 @@
static void lguest_write_idt_entry(gate_desc *dt,
int entrynum, const gate_desc *g)
{
- /* The gate_desc structure is 8 bytes long: we hand it to the Host in
+ /*
+ * The gate_desc structure is 8 bytes long: we hand it to the Host in
* two 32-bit chunks. The whole 32-bit kernel used to hand descriptors
* around like this; typesafety wasn't a big concern in Linux's early
- * years. */
+ * years.
+ */
u32 *desc = (u32 *)g;
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
@@ -272,9 +289,11 @@
kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
}
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
* time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
static void lguest_load_idt(const struct desc_ptr *desc)
{
unsigned int i;
@@ -305,9 +324,11 @@
kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
}
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
* then tell the Host to reload the entire thing. This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
const void *desc, int type)
{
@@ -317,29 +338,36 @@
dt[entrynum].a, dt[entrynum].b);
}
-/* OK, I lied. There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied. There are three "thread local storage" GDT entries which change
* on every context switch (these three entries are how glibc implements
- * __thread variables). So we have a hypercall specifically for this case. */
+ * __thread variables). So we have a hypercall specifically for this case.
+ */
static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
{
- /* There's one problem which normal hardware doesn't have: the Host
+ /*
+ * There's one problem which normal hardware doesn't have: the Host
* can't handle us removing entries we're currently using. So we clear
- * the GS register here: if it's needed it'll be reloaded anyway. */
+ * the GS register here: if it's needed it'll be reloaded anyway.
+ */
lazy_load_gs(0);
lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
}
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
*
* This is the Local Descriptor Table, another weird Intel thingy. Linux only
* uses this for some strange applications like Wine. We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
static void lguest_set_ldt(const void *addr, unsigned entries)
{
}
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
* structure called the Task State Segment. Some comments scattered though the
* kernel code indicate that this used for task switching in ages past, along
* with blood sacrifice and astrology.
@@ -347,19 +375,21 @@
* Now there's nothing interesting in here that we don't get told elsewhere.
* But the native version uses the "ltr" instruction, which makes the Host
* complain to the Guest about a Segmentation Fault and it'll oops. So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
static void lguest_load_tr_desc(void)
{
}
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
* (manufacturer, model, etc) and its features. It was introduced before the
* Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
* As you might imagine, after a decade and a half this treatment, it is now a
* giant ball of hair. Its entry in the current Intel manual runs to 28 pages.
*
* This instruction even it has its own Wikipedia entry. The Wikipedia entry
- * has been translated into 4 languages. I am not making this up!
+ * has been translated into 5 languages. I am not making this up!
*
* We could get funky here and identify ourselves as "GenuineLguest", but
* instead we just use the real "cpuid" instruction. Then I pretty much turned
@@ -371,7 +401,8 @@
* Replacing the cpuid so we can turn features off is great for the kernel, but
* anyone (including userspace) can just use the raw "cpuid" instruction and
* the Host won't even notice since it isn't privileged. So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
@@ -379,38 +410,63 @@
native_cpuid(ax, bx, cx, dx);
switch (function) {
- case 1: /* Basic feature request. */
- /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+ /*
+ * CPUID 0 gives the highest legal CPUID number (and the ID string).
+ * We futureproof our code a little by sticking to known CPUID values.
+ */
+ case 0:
+ if (*ax > 5)
+ *ax = 5;
+ break;
+
+ /*
+ * CPUID 1 is a basic feature request.
+ *
+ * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+ * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+ */
+ case 1:
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
*dx &= 0x07808151;
- /* The Host can do a nice optimization if it knows that the
+ /*
+ * The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
* flush_tlb_user() for both user and kernel mappings unless
- * the Page Global Enable (PGE) feature bit is set. */
+ * the Page Global Enable (PGE) feature bit is set.
+ */
*dx |= 0x00002000;
- /* We also lie, and say we're family id 5. 6 or greater
+ /*
+ * We also lie, and say we're family id 5. 6 or greater
* leads to a rdmsr in early_init_intel which we can't handle.
- * Family ID is returned as bits 8-12 in ax. */
+ * Family ID is returned as bits 8-12 in ax.
+ */
*ax &= 0xFFFFF0FF;
*ax |= 0x00000500;
break;
+ /*
+ * 0x80000000 returns the highest Extended Function, so we futureproof
+ * like we do above by limiting it to known fields.
+ */
case 0x80000000:
- /* Futureproof this a little: if they ask how much extended
- * processor information there is, limit it to known fields. */
if (*ax > 0x80000008)
*ax = 0x80000008;
break;
+
+ /*
+ * PAE systems can mark pages as non-executable. Linux calls this the
+ * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+ * Virus Protection). We just switch turn if off here, since we don't
+ * support it.
+ */
case 0x80000001:
- /* Here we should fix nx cap depending on host. */
- /* For this version of PAE, we just clear NX bit. */
*dx &= ~(1 << 20);
break;
}
}
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
* I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
* it. The Host needs to know when the Guest wants to change them, so we have
* a whole series of functions like read_cr0() and write_cr0().
@@ -425,7 +481,8 @@
* name like "FPUTRAP bit" be a little less cryptic?
*
* We store cr0 locally because the Host never changes it. The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
static unsigned long current_cr0;
static void lguest_write_cr0(unsigned long val)
{
@@ -438,18 +495,22 @@
return current_cr0;
}
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
* to use write_cr0() to do it. This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
static void lguest_clts(void)
{
lazy_hcall1(LHCALL_TS, 0);
current_cr0 &= ~X86_CR0_TS;
}
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
* reads. The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
static unsigned long lguest_read_cr2(void)
{
return lguest_data.cr2;
@@ -458,10 +519,12 @@
/* See lguest_set_pte() below. */
static bool cr3_changed = false;
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
* cr0. Keep a local copy, and tell the Host when it changes. The only
* difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
static void lguest_write_cr3(unsigned long cr3)
{
lguest_data.pgdir = cr3;
@@ -506,7 +569,7 @@
* cr3 ---> +---------+
* | --------->+---------+
* | | | PADDR1 |
- * Top-level | | PADDR2 |
+ * Mid-level | | PADDR2 |
* (PMD) page | | |
* | | Lower-level |
* | | (PTE) page |
@@ -526,21 +589,62 @@
* Index into top Index into second Offset within page
* page directory page pagetable page
*
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages. The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper ]
+ * [ Level ]
+ * [ Entries ]
+ * [(PUD Page)]---> +---------+
+ * | --------->+---------+
+ * | | | PADDR1 |
+ * Mid-level | | PADDR2 |
+ * (PMD) page | | |
+ * | | Lower-level |
+ * | | (PTE) page |
+ * | | | |
+ * .... ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into Index into mid Index into lower Offset within page
+ * top entries directory page pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set. Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages. The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
*/
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space. We set the entry then tell the Host the
- * toplevel and address this corresponds to. The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space. Wetell the Host the toplevel and
+ * address this corresponds to. The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
#ifdef CONFIG_X86_PAE
+ /* PAE needs to hand a 64 bit page table entry, so it uses two args. */
lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
ptep->pte_low, ptep->pte_high);
#else
@@ -548,6 +652,7 @@
#endif
}
+/* This is the "set and update" combo-meal-deal version. */
static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
@@ -555,10 +660,13 @@
lguest_pte_update(mm, addr, ptep);
}
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
* to set a middle-level entry when PAE is activated.
+ *
* Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
#ifdef CONFIG_X86_PAE
static void lguest_set_pud(pud_t *pudp, pud_t pudval)
{
@@ -577,8 +685,7 @@
}
#else
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
native_set_pmd(pmdp, pmdval);
@@ -587,7 +694,8 @@
}
#endif
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
* don't know the top level any more. This is useless for us, since we don't
* know which pagetable is changing or what address, so we just tell the Host
* to forget all of them. Fortunately, this is very rare.
@@ -595,7 +703,8 @@
* ... except in early boot when the kernel sets up the initial pagetables,
* which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
* the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
native_set_pte(ptep, pteval);
@@ -604,6 +713,11 @@
}
#ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry. These
+ * versions ensure we update all 64 bits at once.
+ */
static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
{
native_set_pte_atomic(ptep, pte);
@@ -611,19 +725,21 @@
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
}
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
{
native_pte_clear(mm, addr, ptep);
lguest_pte_update(mm, addr, ptep);
}
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
{
lguest_set_pmd(pmdp, __pmd(0));
}
#endif
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
* native page table operations. On native hardware you can set a new page
* table entry whenever you want, but if you want to remove one you have to do
* a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
@@ -632,24 +748,29 @@
* called when a valid entry is written, not when it's removed (ie. marked not
* present). Instead, this is where we come when the Guest wants to remove a
* page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
static void lguest_flush_tlb_single(unsigned long addr)
{
/* Simply set it to zero: if it was not, it will fault back in. */
lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
}
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
* This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
static void lguest_flush_tlb_user(void)
{
lazy_hcall1(LHCALL_FLUSH_TLB, 0);
}
-/* This is called when the kernel page tables have changed. That's not very
+/*
+ * This is called when the kernel page tables have changed. That's not very
* common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
static void lguest_flush_tlb_kernel(void)
{
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
@@ -686,26 +807,38 @@
.unmask = enable_lguest_irq,
};
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
* interrupt (except 128, which is used for system calls), and then tells the
* Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
static void __init lguest_init_IRQ(void)
{
unsigned int i;
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
- /* Some systems map "vectors" to interrupts weirdly. Lguest has
- * a straightforward 1 to 1 mapping, so force that here. */
+ /* Some systems map "vectors" to interrupts weirdly. Not us! */
__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
if (i != SYSCALL_VECTOR)
set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
}
- /* This call is required to set up for 4k stacks, where we have
- * separate stacks for hard and soft interrupts. */
+
+ /*
+ * This call is required to set up for 4k stacks, where we have
+ * separate stacks for hard and soft interrupts.
+ */
irq_ctx_init(smp_processor_id());
}
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
void lguest_setup_irq(unsigned int irq)
{
irq_to_desc_alloc_node(irq, 0);
@@ -724,31 +857,39 @@
return lguest_data.time.tv_sec;
}
-/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
* what speed it runs at, or 0 if it's unusable as a reliable clock source.
* This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
static unsigned long lguest_tsc_khz(void)
{
return lguest_data.tsc_khz;
}
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
static cycle_t lguest_clock_read(struct clocksource *cs)
{
unsigned long sec, nsec;
- /* Since the time is in two parts (seconds and nanoseconds), we risk
+ /*
+ * Since the time is in two parts (seconds and nanoseconds), we risk
* reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
* and getting 99 and 0. As Linux tends to come apart under the stress
- * of time travel, we must be careful: */
+ * of time travel, we must be careful:
+ */
do {
/* First we read the seconds part. */
sec = lguest_data.time.tv_sec;
- /* This read memory barrier tells the compiler and the CPU that
+ /*
+ * This read memory barrier tells the compiler and the CPU that
* this can't be reordered: we have to complete the above
- * before going on. */
+ * before going on.
+ */
rmb();
/* Now we read the nanoseconds part. */
nsec = lguest_data.time.tv_nsec;
@@ -772,9 +913,11 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
* off some time in the future. Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
static int lguest_clockevent_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
@@ -824,8 +967,10 @@
.max_delta_ns = LG_CLOCK_MAX_DELTA,
};
-/* This is the Guest timer interrupt handler (hardware interrupt 0). We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0). We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned long flags;
@@ -836,10 +981,12 @@
local_irq_restore(flags);
}
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
* infrastructure. The kernel doesn't expect timer interrupts before this, but
* we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
static void lguest_time_init(void)
{
/* Set up the timer interrupt (0) to go to our simple timer routine */
@@ -863,14 +1010,16 @@
* to work. They're pretty simple.
*/
-/* The Guest needs to tell the Host what stack it expects traps to use. For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use. For
* native hardware, this is part of the Task State Segment mentioned above in
* lguest_load_tr_desc(), but to help hypervisors there's this special call.
*
* We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
* segment), the privilege level (we're privilege level 1, the Host is 0 and
* will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
static void lguest_load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
@@ -884,7 +1033,8 @@
/* FIXME: Implement */
}
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
* caught in the cache (that they've all reached real hardware devices). This
* doesn't matter for the Guest which has virtual hardware.
*
@@ -898,11 +1048,13 @@
{
}
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
* we play dumb by ignoring writes and returning 0 for reads. So it's no
* longer Programmable nor Controlling anything, and I don't think 8 lines of
* code qualifies for Advanced. It will also never interrupt anything. It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
#ifdef CONFIG_X86_LOCAL_APIC
static void lguest_apic_write(u32 reg, u32 v)
{
@@ -951,11 +1103,13 @@
kvm_hypercall0(LHCALL_HALT);
}
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
* an argument which says whether this to restart (reboot) the Guest or not.
*
* Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
static void lguest_power_off(void)
{
kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
@@ -986,8 +1140,10 @@
* nice to move it back to lguest_init. Patch welcome... */
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- /* The Linux bootloader header contains an "e820" memory map: the
- * Launcher populated the first entry with our memory limit. */
+ /*
+ *The Linux bootloader header contains an "e820" memory map: the
+ * Launcher populated the first entry with our memory limit.
+ */
e820_add_region(boot_params.e820_map[0].addr,
boot_params.e820_map[0].size,
boot_params.e820_map[0].type);
@@ -996,16 +1152,17 @@
return "LGUEST";
}
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
* but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
static __init int early_put_chars(u32 vtermno, const char *buf, int count)
{
char scratch[17];
unsigned int len = count;
- /* We use a nul-terminated string, so we have to make a copy. Icky,
- * huh? */
+ /* We use a nul-terminated string, so we make a copy. Icky, huh? */
if (len > sizeof(scratch) - 1)
len = sizeof(scratch) - 1;
scratch[len] = '\0';
@@ -1016,8 +1173,10 @@
return len;
}
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
static void lguest_restart(char *reason)
{
kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
@@ -1044,7 +1203,8 @@
* fit comfortably.
*
* First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
/*G:060 We construct a table from the assembler templates: */
static const struct lguest_insns
@@ -1055,9 +1215,11 @@
[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
};
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
* paravirt.c). If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
unsigned long addr, unsigned len)
{
@@ -1069,8 +1231,7 @@
insn_len = lguest_insns[type].end - lguest_insns[type].start;
- /* Similarly if we can't fit replacement (shouldn't happen, but let's
- * be thorough). */
+ /* Similarly if it can't fit (doesn't happen, but let's be thorough). */
if (len < insn_len)
return paravirt_patch_default(type, clobber, ibuf, addr, len);
@@ -1079,22 +1240,28 @@
return insn_len;
}
-/*G:030 Once we get to lguest_init(), we know we're a Guest. The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest. The various
* pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
__init void lguest_init(void)
{
- /* We're under lguest, paravirt is enabled, and we're running at
- * privilege level 1, not 0 as normal. */
+ /* We're under lguest. */
pv_info.name = "lguest";
+ /* Paravirt is enabled. */
pv_info.paravirt_enabled = 1;
+ /* We're running at privilege level 1, not 0 as normal. */
pv_info.kernel_rpl = 1;
+ /* Everyone except Xen runs with this set. */
pv_info.shared_kernel_pmd = 1;
- /* We set up all the lguest overrides for sensitive operations. These
- * are detailed with the operations themselves. */
+ /*
+ * We set up all the lguest overrides for sensitive operations. These
+ * are detailed with the operations themselves.
+ */
- /* interrupt-related operations */
+ /* Interrupt-related operations */
pv_irq_ops.init_IRQ = lguest_init_IRQ;
pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
@@ -1102,11 +1269,11 @@
pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
pv_irq_ops.safe_halt = lguest_safe_halt;
- /* init-time operations */
+ /* Setup operations */
pv_init_ops.memory_setup = lguest_memory_setup;
pv_init_ops.patch = lguest_patch;
- /* Intercepts of various cpu instructions */
+ /* Intercepts of various CPU instructions */
pv_cpu_ops.load_gdt = lguest_load_gdt;
pv_cpu_ops.cpuid = lguest_cpuid;
pv_cpu_ops.load_idt = lguest_load_idt;
@@ -1127,7 +1294,7 @@
pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
pv_cpu_ops.end_context_switch = lguest_end_context_switch;
- /* pagetable management */
+ /* Pagetable management */
pv_mmu_ops.write_cr3 = lguest_write_cr3;
pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
@@ -1149,54 +1316,71 @@
pv_mmu_ops.pte_update_defer = lguest_pte_update;
#ifdef CONFIG_X86_LOCAL_APIC
- /* apic read/write intercepts */
+ /* APIC read/write intercepts */
set_lguest_basic_apic_ops();
#endif
- /* time operations */
+ /* Time operations */
pv_time_ops.get_wallclock = lguest_get_wallclock;
pv_time_ops.time_init = lguest_time_init;
pv_time_ops.get_tsc_khz = lguest_tsc_khz;
- /* Now is a good time to look at the implementations of these functions
- * before returning to the rest of lguest_init(). */
+ /*
+ * Now is a good time to look at the implementations of these functions
+ * before returning to the rest of lguest_init().
+ */
- /*G:070 Now we've seen all the paravirt_ops, we return to
+ /*G:070
+ * Now we've seen all the paravirt_ops, we return to
* lguest_init() where the rest of the fairly chaotic boot setup
- * occurs. */
+ * occurs.
+ */
- /* The stack protector is a weird thing where gcc places a canary
+ /*
+ * The stack protector is a weird thing where gcc places a canary
* value on the stack and then checks it on return. This file is
* compiled with -fno-stack-protector it, so we got this far without
* problems. The value of the canary is kept at offset 20 from the
* %gs register, so we need to set that up before calling C functions
- * in other files. */
+ * in other files.
+ */
setup_stack_canary_segment(0);
- /* We could just call load_stack_canary_segment(), but we might as
- * call switch_to_new_gdt() which loads the whole table and sets up
- * the per-cpu segment descriptor register %fs as well. */
+
+ /*
+ * We could just call load_stack_canary_segment(), but we might as well
+ * call switch_to_new_gdt() which loads the whole table and sets up the
+ * per-cpu segment descriptor register %fs as well.
+ */
switch_to_new_gdt(0);
- /* As described in head_32.S, we map the first 128M of memory. */
+ /* We actually boot with all memory mapped, but let's say 128MB. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
- /* The Host<->Guest Switcher lives at the top of our address space, and
+ /*
+ * The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
- * it put the answer in lguest_data.reserve_mem */
+ * it put the answer in lguest_data.reserve_mem
+ */
reserve_top_address(lguest_data.reserve_mem);
- /* If we don't initialize the lock dependency checker now, it crashes
- * paravirt_disable_iospace. */
+ /*
+ * If we don't initialize the lock dependency checker now, it crashes
+ * paravirt_disable_iospace.
+ */
lockdep_init();
- /* The IDE code spends about 3 seconds probing for disks: if we reserve
+ /*
+ * The IDE code spends about 3 seconds probing for disks: if we reserve
* all the I/O ports up front it can't get them and so doesn't probe.
* Other device drivers are similar (but less severe). This cuts the
- * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+ * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+ */
paravirt_disable_iospace();
- /* This is messy CPU setup stuff which the native boot code does before
- * start_kernel, so we have to do, too: */
+ /*
+ * This is messy CPU setup stuff which the native boot code does before
+ * start_kernel, so we have to do, too:
+ */
cpu_detect(&new_cpu_data);
/* head.S usually sets up the first capability word, so do it here. */
new_cpu_data.x86_capability[0] = cpuid_edx(1);
@@ -1213,22 +1397,28 @@
acpi_ht = 0;
#endif
- /* We set the preferred console to "hvc". This is the "hypervisor
+ /*
+ * We set the preferred console to "hvc". This is the "hypervisor
* virtual console" driver written by the PowerPC people, which we also
- * adapted for lguest's use. */
+ * adapted for lguest's use.
+ */
add_preferred_console("hvc", 0, NULL);
/* Register our very early console. */
virtio_cons_early_init(early_put_chars);
- /* Last of all, we set the power management poweroff hook to point to
+ /*
+ * Last of all, we set the power management poweroff hook to point to
* the Guest routine to power off, and the reboot hook to our restart
- * routine. */
+ * routine.
+ */
pm_power_off = lguest_power_off;
machine_ops.restart = lguest_restart;
- /* Now we're set up, call i386_start_kernel() in head32.c and we proceed
- * to boot as normal. It never returns. */
+ /*
+ * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+ * to boot as normal. It never returns.
+ */
i386_start_kernel();
}
/*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index a9c8cfe..27eac0f 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,7 +5,8 @@
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
* arch/x86/kernel/head_32.S. It expects a boot header, which is created by
* the bootloader (the Launcher in our case).
*
@@ -21,11 +22,14 @@
* data without remembering to subtract __PAGE_OFFSET!
*
* The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
.section .init.text, "ax", @progbits
ENTRY(lguest_entry)
- /* We make the "initialization" hypercall now to tell the Host about
- * us, and also find out where it put our page tables. */
+ /*
+ * We make the "initialization" hypercall now to tell the Host about
+ * us, and also find out where it put our page tables.
+ */
movl $LHCALL_LGUEST_INIT, %eax
movl $lguest_data - __PAGE_OFFSET, %ebx
.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
@@ -33,13 +37,14 @@
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
- /* Jumps are relative, and we're running __PAGE_OFFSET too low at the
- * moment. */
+ /* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers. These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers. These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
.text
#define LGUEST_PATCH(name, insns...) \
lgstart_##name: insns; lgend_##name:; \
@@ -48,83 +53,103 @@
LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later). If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later). If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
*
* I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages. First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages. First, the routine to
+ * enable interrupts:
+ */
ENTRY(lg_irq_enable)
- /* The reverse of irq_disable, this sets lguest_data.irq_enabled to
- * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+ /*
+ * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+ * X86_EFLAGS_IF (ie. "Interrupts enabled").
+ */
movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
- /* But now we need to check if the Host wants to know: there might have
+ /*
+ * But now we need to check if the Host wants to know: there might have
* been interrupts waiting to be delivered, in which case it will have
* set lguest_data.irq_pending to X86_EFLAGS_IF. If it's not zero, we
- * jump to send_interrupts, otherwise we're done. */
+ * jump to send_interrupts, otherwise we're done.
+ */
testl $0, lguest_data+LGUEST_DATA_irq_pending
jnz send_interrupts
- /* One cool thing about x86 is that you can do many things without using
+ /*
+ * One cool thing about x86 is that you can do many things without using
* a register. In this case, the normal path hasn't needed to save or
- * restore any registers at all! */
+ * restore any registers at all!
+ */
ret
send_interrupts:
- /* OK, now we need a register: eax is used for the hypercall number,
+ /*
+ * OK, now we need a register: eax is used for the hypercall number,
* which is LHCALL_SEND_INTERRUPTS.
*
* We used not to bother with this pending detection at all, which was
* much simpler. Sooner or later the Host would realize it had to
* send us an interrupt. But that turns out to make performance 7
* times worse on a simple tcp benchmark. So now we do this the hard
- * way. */
+ * way.
+ */
pushl %eax
movl $LHCALL_SEND_INTERRUPTS, %eax
- /* This is a vmcall instruction (same thing that KVM uses). Older
+ /*
+ * This is a vmcall instruction (same thing that KVM uses). Older
* assembler versions might not know the "vmcall" instruction, so we
- * create one manually here. */
+ * create one manually here.
+ */
.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+ /* Put eax back the way we found it. */
popl %eax
ret
-/* Finally, the "popf" or "restore flags" routine. The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine. The %eax register holds the
* flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
ENTRY(lg_restore_fl)
/* This is just "lguest_data.irq_enabled = flags;" */
movl %eax, lguest_data+LGUEST_DATA_irq_enabled
- /* Now, if the %eax value has enabled interrupts and
+ /*
+ * Now, if the %eax value has enabled interrupts and
* lguest_data.irq_pending is set, we want to tell the Host so it can
* deliver any outstanding interrupts. Fortunately, both values will
* be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
* instruction will AND them together for us. If both are set, we
- * jump to send_interrupts. */
+ * jump to send_interrupts.
+ */
testl lguest_data+LGUEST_DATA_irq_pending, %eax
jnz send_interrupts
/* Again, the normal path has used no extra registers. Clever, huh? */
ret
+/*:*/
/* These demark the EIP range where host should never deliver interrupts. */
.global lguest_noirq_start
.global lguest_noirq_end
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it. However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it. However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
*
* This turns out to be harmless: the only trap which should happen under Linux
* with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
* regions), which has to be reflected through the Host anyway. If another
* trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last. It's *cool*! It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last. It's *cool*! It's in *assembler*!
*
* The "iret" instruction is used to return from an interrupt or trap. The
* stack looks like this:
@@ -148,15 +173,18 @@
* return to userspace or wherever. Our solution to this is to surround the
* code with lguest_noirq_start: and lguest_noirq_end: labels. We tell the
* Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
ENTRY(lguest_iret)
pushl %eax
movl 12(%esp), %eax
lguest_noirq_start:
- /* Note the %ss: segment prefix here. Normal data accesses use the
+ /*
+ * Note the %ss: segment prefix here. Normal data accesses use the
* "ds" segment, but that will have already been restored for whatever
* we're returning to (such as userspace): we can't trust it. The %ss:
- * prefix makes sure we use the stack segment, which is still valid. */
+ * prefix makes sure we use the stack segment, which is still valid.
+ */
movl %eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
popl %eax
iret
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f9d3563..07c3189 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@
lib-y += memcpy_$(BITS).o
ifeq ($(CONFIG_X86_32),y)
+ obj-y += atomic64_32.o
lib-y += checksum_32.o
lib-y += strstr_32.o
lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
new file mode 100644
index 0000000..824fa0b
--- /dev/null
+++ b/arch/x86/lib/atomic64_32.c
@@ -0,0 +1,230 @@
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+#include <asm/atomic.h>
+
+static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+{
+ u32 low = new;
+ u32 high = new >> 32;
+
+ asm volatile(
+ LOCK_PREFIX "cmpxchg8b %1\n"
+ : "+A" (old), "+m" (*ptr)
+ : "b" (low), "c" (high)
+ );
+ return old;
+}
+
+u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
+{
+ return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+EXPORT_SYMBOL(atomic64_cmpxchg);
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return old_val;
+}
+EXPORT_SYMBOL(atomic64_xchg);
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ * @new_val: value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+void atomic64_set(atomic64_t *ptr, u64 new_val)
+{
+ atomic64_xchg(ptr, new_val);
+}
+EXPORT_SYMBOL(atomic64_set);
+
+/**
+EXPORT_SYMBOL(atomic64_read);
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+{
+ /*
+ * Try first with a (possibly incorrect) assumption about
+ * what we have there. We'll do two loops most likely,
+ * but we'll get an ownership MESI transaction straight away
+ * instead of a read transaction followed by a
+ * flush-for-ownership transaction:
+ */
+ u64 old_val, new_val, real_val = 0;
+
+ do {
+ old_val = real_val;
+ new_val = old_val + delta;
+
+ real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+ } while (real_val != old_val);
+
+ return new_val;
+}
+EXPORT_SYMBOL(atomic64_add_return);
+
+u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
+{
+ return atomic64_add_return(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub_return);
+
+u64 atomic64_inc_return(atomic64_t *ptr)
+{
+ return atomic64_add_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_return);
+
+u64 atomic64_dec_return(atomic64_t *ptr)
+{
+ return atomic64_sub_return(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_return);
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+void atomic64_add(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add_return(delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_add);
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+void atomic64_sub(u64 delta, atomic64_t *ptr)
+{
+ atomic64_add(-delta, ptr);
+}
+EXPORT_SYMBOL(atomic64_sub);
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
+{
+ u64 new_val = atomic64_sub_return(delta, ptr);
+
+ return new_val == 0;
+}
+EXPORT_SYMBOL(atomic64_sub_and_test);
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+void atomic64_inc(atomic64_t *ptr)
+{
+ atomic64_add(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc);
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+void atomic64_dec(atomic64_t *ptr)
+{
+ atomic64_sub(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec);
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+int atomic64_dec_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(1, ptr);
+}
+EXPORT_SYMBOL(atomic64_dec_and_test);
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_inc_and_test(atomic64_t *ptr)
+{
+ return atomic64_sub_and_test(-1, ptr);
+}
+EXPORT_SYMBOL(atomic64_inc_and_test);
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+int atomic64_add_negative(u64 delta, atomic64_t *ptr)
+{
+ s64 new_val = atomic64_add_return(delta, ptr);
+
+ return new_val < 0;
+}
+EXPORT_SYMBOL(atomic64_add_negative);
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78..ebeafcc 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
* Zero a page.
* rdi page
*/
- ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
CFI_STARTPROC
movl $4096/8,%ecx
xorl %eax,%eax
rep stosq
ret
CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
ENTRY(clear_page)
CFI_STARTPROC
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c11..6ba0f7b 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@
jae bad_to_user
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
CFI_ENDPROC
+ENDPROC(copy_to_user)
/* Standard copy_from_user with segment limit checking */
ENTRY(copy_from_user)
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f456860..ff485d3 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@
preempt_disable();
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
for (;;) {
+ rdtsc_barrier();
rdtscl(now);
if ((now - bclock) >= loops)
break;
@@ -78,6 +80,7 @@
if (unlikely(cpu != smp_processor_id())) {
loops -= (now - bclock);
cpu = smp_processor_id();
+ rdtsc_barrier();
rdtscl(bclock);
}
}
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 1440b9c..caa24ac 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -89,16 +89,13 @@
rv.msrs = msrs;
rv.msr_no = msr_no;
- preempt_disable();
- /*
- * FIXME: handle the CPU we're executing on separately for now until
- * smp_call_function_many has been fixed to not skip it.
- */
- this_cpu = raw_smp_processor_id();
- smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+ this_cpu = get_cpu();
+
+ if (cpumask_test_cpu(this_cpu, mask))
+ __rdmsr_on_cpu(&rv);
smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
- preempt_enable();
+ put_cpu();
}
EXPORT_SYMBOL(rdmsr_on_cpus);
@@ -121,16 +118,13 @@
rv.msrs = msrs;
rv.msr_no = msr_no;
- preempt_disable();
- /*
- * FIXME: handle the CPU we're executing on separately for now until
- * smp_call_function_many has been fixed to not skip it.
- */
- this_cpu = raw_smp_processor_id();
- smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+ this_cpu = get_cpu();
+
+ if (cpumask_test_cpu(this_cpu, mask))
+ __wrmsr_on_cpu(&rv);
smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
- preempt_enable();
+ put_cpu();
}
EXPORT_SYMBOL(wrmsr_on_cpus);
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 7c8ca91..1f118d4 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -751,7 +751,7 @@
if (retval == -ENOMEM && is_global_init(current)) {
up_read(¤t->mm->mmap_sem);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto survive;
}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff..bfae139 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@
}
static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
/*
* No vm86 mode in 64-bit mode:
@@ -696,7 +697,7 @@
if (!printk_ratelimit())
return;
- printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+ printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
tsk->comm, task_pid_nr(tsk), address,
(void *)regs->ip, (void *)regs->sp, error_code);
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e..2112ed5 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -103,6 +103,7 @@
EXPORT_SYMBOL(kunmap);
EXPORT_SYMBOL(kmap_atomic);
EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
void __init set_highmem_pages_init(void)
{
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e..0607119 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include <asm/proto.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -177,20 +178,6 @@
return nr_range;
}
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
- if (direct_gbpages && cpu_has_gbpages)
- printk(KERN_INFO "Using GB pages for direct mapping\n");
- else
- direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
/*
* Setup the direct mapping of the physical memory at PAGE_OFFSET.
* This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +197,6 @@
printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
- if (!after_bootmem)
- init_gbpages();
-
#if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
/*
* For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4..6176fe8 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,15 @@
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
+
+ /*
+ * clear the default setting with node 0
+ * note: don't use nodes_clear here, that is really clearing when
+ * numa support is not compiled in, and later node_set_state
+ * will not set it back.
+ */
+ node_clear_state(0, N_NORMAL_MEMORY);
+
free_area_init_nodes(max_zone_pfns);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ce..7e600c1 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/pfn.h>
#include <asm/e820.h>
#include <asm/processor.h>
@@ -590,9 +591,12 @@
unsigned int level;
pte_t *kpte, old_pte;
- if (cpa->flags & CPA_PAGES_ARRAY)
- address = (unsigned long)page_address(cpa->pages[cpa->curpage]);
- else if (cpa->flags & CPA_ARRAY)
+ if (cpa->flags & CPA_PAGES_ARRAY) {
+ struct page *page = cpa->pages[cpa->curpage];
+ if (unlikely(PageHighMem(page)))
+ return 0;
+ address = (unsigned long)page_address(page);
+ } else if (cpa->flags & CPA_ARRAY)
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
@@ -681,8 +685,9 @@
static int cpa_process_alias(struct cpa_data *cpa)
{
struct cpa_data alias_cpa;
- int ret = 0;
- unsigned long temp_cpa_vaddr, vaddr;
+ unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+ unsigned long vaddr, remapped;
+ int ret;
if (cpa->pfn >= max_pfn_mapped)
return 0;
@@ -695,9 +700,12 @@
* No need to redo, when the primary call touched the direct
* mapping already:
*/
- if (cpa->flags & CPA_PAGES_ARRAY)
- vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]);
- else if (cpa->flags & CPA_ARRAY)
+ if (cpa->flags & CPA_PAGES_ARRAY) {
+ struct page *page = cpa->pages[cpa->curpage];
+ if (unlikely(PageHighMem(page)))
+ return 0;
+ vaddr = (unsigned long)page_address(page);
+ } else if (cpa->flags & CPA_ARRAY)
vaddr = cpa->vaddr[cpa->curpage];
else
vaddr = *cpa->vaddr;
@@ -706,42 +714,55 @@
PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
alias_cpa = *cpa;
- temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
- alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.vaddr = &laddr;
alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
-
ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
}
#ifdef CONFIG_X86_64
- if (ret)
- return ret;
/*
- * No need to redo, when the primary call touched the high
- * mapping already:
- */
- if (within(vaddr, (unsigned long) _text, _brk_end))
- return 0;
-
- /*
- * If the physical address is inside the kernel map, we need
+ * If the primary call didn't touch the high mapping already
+ * and the physical address is inside the kernel map, we need
* to touch the high mapped kernel as well:
*/
- if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
- return 0;
+ if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+ within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+ unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+ __START_KERNEL_map - phys_base;
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &temp_cpa_vaddr;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
- alias_cpa = *cpa;
- temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
- alias_cpa.vaddr = &temp_cpa_vaddr;
- alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ /*
+ * The high mapping range is imprecise, so ignore the
+ * return value.
+ */
+ __change_page_attr_set_clr(&alias_cpa, 0);
+ }
+#endif
/*
- * The high mapping range is imprecise, so ignore the return value.
+ * If the PMD page was partially used for per-cpu remapping,
+ * the recycled area needs to be split and modified. Because
+ * the area is always proper subset of a PMD page
+ * cpa->numpages is guaranteed to be 1 for these areas, so
+ * there's no need to loop over and check for further remaps.
*/
- __change_page_attr_set_clr(&alias_cpa, 0);
-#endif
- return ret;
+ remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+ if (remapped) {
+ WARN_ON(cpa->numpages > 1);
+ alias_cpa = *cpa;
+ alias_cpa.vaddr = &remapped;
+ alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+ ret = __change_page_attr_set_clr(&alias_cpa, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
@@ -982,12 +1003,15 @@
int _set_memory_wc(unsigned long addr, int numpages)
{
int ret;
+ unsigned long addr_copy = addr;
+
ret = change_page_attr_set(&addr, numpages,
__pgprot(_PAGE_CACHE_UC_MINUS), 0);
-
if (!ret) {
- ret = change_page_attr_set(&addr, numpages,
- __pgprot(_PAGE_CACHE_WC), 0);
+ ret = change_page_attr_set_clr(&addr_copy, numpages,
+ __pgprot(_PAGE_CACHE_WC),
+ __pgprot(_PAGE_CACHE_MASK),
+ 0, 0, NULL);
}
return ret;
}
@@ -1104,7 +1128,9 @@
int free_idx;
for (i = 0; i < addrinarray; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
goto err_out;
@@ -1117,7 +1143,9 @@
err_out:
free_idx = i;
for (i = 0; i < free_idx; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
free_memtype(start, end);
}
@@ -1146,7 +1174,9 @@
return retval;
for (i = 0; i < addrinarray; i++) {
- start = (unsigned long)page_address(pages[i]);
+ if (PageHighMem(pages[i]))
+ continue;
+ start = page_to_pfn(pages[i]) << PAGE_SHIFT;
end = start + PAGE_SIZE;
free_memtype(start, end);
}
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 8e43bdd..ed34f5e 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -25,7 +25,7 @@
return pte;
}
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
{
pgtable_page_dtor(pte);
paravirt_release_pte(page_to_pfn(pte));
@@ -33,14 +33,14 @@
}
#if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
{
paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
tlb_remove_page(tlb, virt_to_page(pmd));
}
#if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
{
paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
tlb_remove_page(tlb, virt_to_page(pud));
@@ -329,7 +329,6 @@
printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
(int)-reserve);
__FIXADDR_TOP = -reserve - PAGE_SIZE;
- __VMALLOC_RESERVE += reserve;
#endif
}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 2dfcbf9..dbb5381 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,8 +79,10 @@
acpi_numa = -1;
for (i = 0; i < MAX_LOCAL_APIC; i++)
apicid_to_node[i] = NUMA_NO_NODE;
- for (i = 0; i < MAX_NUMNODES; i++)
- nodes_add[i].start = nodes[i].end = 0;
+ for (i = 0; i < MAX_NUMNODES; i++) {
+ nodes[i].start = nodes[i].end = 0;
+ nodes_add[i].start = nodes_add[i].end = 0;
+ }
remove_all_active_ranges();
}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b07dd8d..89b9a5c 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -390,7 +390,7 @@
static int force_arch_perfmon;
static int force_cpu_type(const char *str, struct kernel_param *kp)
{
- if (!strcmp(str, "archperfmon")) {
+ if (!strcmp(str, "arch_perfmon")) {
force_arch_perfmon = 1;
printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
}
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626d..1014eb4 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@
unsigned long flags;
struct resource *root;
int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+ u64 start, end;
+
+ if (bus_has_transparent_bridge(info->bus))
+ max_root_bus_resources -= 3;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@
} else
return AE_OK;
- res = &info->res[info->res_num];
- res->name = info->name;
- res->flags = flags;
- res->start = addr.minimum + addr.translation_offset;
- res->end = res->start + addr.address_length - 1;
- res->child = NULL;
-
- if (bus_has_transparent_bridge(info->bus))
- max_root_bus_resources -= 3;
+ start = addr.minimum + addr.translation_offset;
+ end = start + addr.address_length - 1;
if (info->res_num >= max_root_bus_resources) {
printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s due to _CRS returning more than "
- "%d resource descriptors\n", (unsigned long) res->start,
- (unsigned long) res->end, root->name, info->name,
+ "%d resource descriptors\n", (unsigned long) start,
+ (unsigned long) end, root->name, info->name,
max_root_bus_resources);
- info->res_num++;
return AE_OK;
}
+ res = &info->res[info->res_num];
+ res->name = info->name;
+ res->flags = flags;
+ res->start = start;
+ res->end = end;
+ res->child = NULL;
+
if (insert_resource(root, res)) {
printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s\n", (unsigned long) res->start,
@@ -115,23 +118,6 @@
}
static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- int i;
- u16 class = dev->class >> 8;
-
- if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
- for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
- dev->subordinate->resource[i] =
- dev->bus->resource[i - 3];
- }
- }
-}
-
-static void
get_current_resources(struct acpi_device *device, int busnum,
int domain, struct pci_bus *bus)
{
@@ -158,8 +144,6 @@
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
- if (info.res_num)
- adjust_transparent_bridge_resources(bus);
return;
@@ -222,8 +206,15 @@
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(sd);
- } else
- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+ } else {
+ bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+ if (bus) {
+ if (pci_probe & PCI_USE__CRS)
+ get_current_resources(device, busnum, domain,
+ bus);
+ bus->subordinate = pci_scan_child_bus(bus);
+ }
+ }
if (!bus)
kfree(sd);
@@ -238,8 +229,6 @@
#endif
}
- if (bus && (pci_probe & PCI_USE__CRS))
- get_current_resources(device, busnum, domain, bus);
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a..3ffa10d 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@
int j;
struct pci_root_info *info;
- /* don't go for it if _CRS is used */
- if (pci_probe & PCI_USE__CRS)
+ /* don't go for it if _CRS is used already */
+ if (b->resource[0] != &ioport_resource ||
+ b->resource[1] != &iomem_resource)
return;
/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@
if (i == pci_root_num)
return;
+ printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+ b->number);
+
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 0fb56db..52e62e5 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -35,6 +35,7 @@
#include <asm/pat.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
+#include <asm/io_apic.h>
static int
@@ -227,6 +228,12 @@
pcibios_allocate_resources(1);
e820_reserve_resources_late();
+ /*
+ * Insert the IO APIC resources after PCI initialization has
+ * occured to handle IO APICS that are mapped in on a BAR in
+ * PCI space, but before trying to assign unassigned pci res.
+ */
+ ioapic_insert_resources();
}
/**
diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd..a6a198c 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
# __restore_processor_state() restores %gs after S3 resume and so should not
# itself be stack-protected
nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o := $(nostackp)
+CFLAGS_cpu.o := $(nostackp)
obj-$(CONFIG_PM_SLEEP) += cpu.o
obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1..b3d20b9 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@
do_fpu_end();
mtrr_ap_init();
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
mcheck_init(&boot_cpu_data);
#endif
}
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 0f4fe1f..1316564 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -80,8 +80,6 @@
/*
* macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
@@ -92,7 +90,7 @@
.exec_domain = &default_exec_domain, \
.flags = 0, \
.cpu = 0, \
- .preempt_count = 1, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h
index 31c220f..0d766f9 100644
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -42,6 +42,6 @@
#include <asm-generic/tlb.h>
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
#endif /* _XTENSA_TLB_H */
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ba9ab93..e64efac 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -354,10 +354,10 @@
for (i = 0; i < 16; i++) {
if ((i % 8) == 0)
- printk ("\n" KERN_INFO "a%02d: ", i);
- printk("%08lx ", regs->areg[i]);
+ printk(KERN_INFO "a%02d:", i);
+ printk(KERN_CONT " %08lx", regs->areg[i]);
}
- printk("\n");
+ printk(KERN_CONT "\n");
printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
regs->pc, regs->ps, regs->depc, regs->excvaddr);
diff --git a/block/Kconfig b/block/Kconfig
index 95a86ad..9be0b56 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -48,9 +48,9 @@
If unsure, say Y.
config BLK_DEV_BSG
- bool "Block layer SG support v4 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- ---help---
+ bool "Block layer SG support v4"
+ default y
+ help
Saying Y here will enable generic SG (SCSI generic) v4 support
for any block device.
@@ -60,7 +60,10 @@
protocols (e.g. Task Management Functions and SMP in Serial
Attached SCSI).
- If unsure, say N.
+ This option is required by recent UDEV versions to properly
+ access device serial numbers, etc.
+
+ If unsure, say Y.
config BLK_DEV_INTEGRITY
bool "Block layer data integrity support"
diff --git a/block/Makefile b/block/Makefile
index e9fa4dd..6c54ed0 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -5,7 +5,7 @@
obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \
blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \
blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \
- ioctl.o genhd.o scsi_ioctl.o cmd-filter.o
+ ioctl.o genhd.o scsi_ioctl.o
obj-$(CONFIG_BLK_DEV_BSG) += bsg.o
obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o
diff --git a/block/blk-core.c b/block/blk-core.c
index b06cf5c..e3299a7 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -575,13 +575,6 @@
return NULL;
}
- /*
- * if caller didn't supply a lock, they get per-queue locking with
- * our embedded lock
- */
- if (!lock)
- lock = &q->__queue_lock;
-
q->request_fn = rfn;
q->prep_rq_fn = NULL;
q->unplug_fn = generic_unplug_device;
@@ -595,8 +588,6 @@
q->sg_reserved_size = INT_MAX;
- blk_set_cmd_filter_defaults(&q->cmd_filter);
-
/*
* all done
*/
@@ -1172,6 +1163,11 @@
const int unplug = bio_unplug(bio);
int rw_flags;
+ if (bio_barrier(bio) && bio_has_data(bio) &&
+ (q->next_ordered == QUEUE_ORDERED_NONE)) {
+ bio_endio(bio, -EOPNOTSUPP);
+ return 0;
+ }
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
@@ -1472,11 +1468,6 @@
err = -EOPNOTSUPP;
goto end_io;
}
- if (bio_barrier(bio) && bio_has_data(bio) &&
- (q->next_ordered == QUEUE_ORDERED_NONE)) {
- err = -EOPNOTSUPP;
- goto end_io;
- }
ret = q->make_request_fn(q, bio);
} while (ret);
@@ -2145,7 +2136,7 @@
{
return blk_end_bidi_request(rq, error, nr_bytes, 0);
}
-EXPORT_SYMBOL_GPL(blk_end_request);
+EXPORT_SYMBOL(blk_end_request);
/**
* blk_end_request_all - Helper function for drives to finish the request.
@@ -2166,7 +2157,7 @@
pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
-EXPORT_SYMBOL_GPL(blk_end_request_all);
+EXPORT_SYMBOL(blk_end_request_all);
/**
* blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2184,7 +2175,7 @@
{
return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
-EXPORT_SYMBOL_GPL(blk_end_request_cur);
+EXPORT_SYMBOL(blk_end_request_cur);
/**
* __blk_end_request - Helper function for drivers to complete the request.
@@ -2203,7 +2194,7 @@
{
return __blk_end_bidi_request(rq, error, nr_bytes, 0);
}
-EXPORT_SYMBOL_GPL(__blk_end_request);
+EXPORT_SYMBOL(__blk_end_request);
/**
* __blk_end_request_all - Helper function for drives to finish the request.
@@ -2224,7 +2215,7 @@
pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
-EXPORT_SYMBOL_GPL(__blk_end_request_all);
+EXPORT_SYMBOL(__blk_end_request_all);
/**
* __blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2243,7 +2234,7 @@
{
return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
-EXPORT_SYMBOL_GPL(__blk_end_request_cur);
+EXPORT_SYMBOL(__blk_end_request_cur);
void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
@@ -2365,7 +2356,7 @@
__bio_clone(bio, bio_src);
if (bio_integrity(bio_src) &&
- bio_integrity_clone(bio, bio_src, gfp_mask))
+ bio_integrity_clone(bio, bio_src, gfp_mask, bs))
goto free_and_out;
if (bio_ctr && bio_ctr(bio, bio_src, data))
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 73e28d3..15c6308 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -379,6 +379,7 @@
kobject_uevent(&bi->kobj, KOBJ_REMOVE);
kobject_del(&bi->kobj);
+ kobject_put(&bi->kobj);
kmem_cache_free(integrity_cachep, bi);
disk->integrity = NULL;
}
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 39ce644..e199967 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -350,6 +350,12 @@
if (blk_integrity_rq(req) != blk_integrity_rq(next))
return 0;
+ /* don't merge requests of different failfast settings */
+ if (blk_failfast_dev(req) != blk_failfast_dev(next) ||
+ blk_failfast_transport(req) != blk_failfast_transport(next) ||
+ blk_failfast_driver(req) != blk_failfast_driver(next))
+ return 0;
+
/*
* If we are allowed to merge, then append bio list
* from next to rq and release next. merge_requests_fn
diff --git a/block/blk-settings.c b/block/blk-settings.c
index bd582a7..476d870 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -7,6 +7,7 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h> /* for max_pfn/max_low_pfn */
+#include <linux/gcd.h>
#include "blk.h"
@@ -165,6 +166,13 @@
blk_set_default_limits(&q->limits);
/*
+ * If the caller didn't supply a lock, fall back to our embedded
+ * per-queue locks
+ */
+ if (!q->queue_lock)
+ q->queue_lock = &q->__queue_lock;
+
+ /*
* by default assume old behaviour and bounce for any highmem page
*/
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
@@ -377,8 +385,8 @@
EXPORT_SYMBOL(blk_queue_alignment_offset);
/**
- * blk_queue_io_min - set minimum request size for the queue
- * @q: the request queue for the device
+ * blk_limits_io_min - set minimum request size for a device
+ * @limits: the queue limits
* @min: smallest I/O size in bytes
*
* Description:
@@ -387,15 +395,35 @@
* smallest I/O the device can perform without incurring a performance
* penalty.
*/
+void blk_limits_io_min(struct queue_limits *limits, unsigned int min)
+{
+ limits->io_min = min;
+
+ if (limits->io_min < limits->logical_block_size)
+ limits->io_min = limits->logical_block_size;
+
+ if (limits->io_min < limits->physical_block_size)
+ limits->io_min = limits->physical_block_size;
+}
+EXPORT_SYMBOL(blk_limits_io_min);
+
+/**
+ * blk_queue_io_min - set minimum request size for the queue
+ * @q: the request queue for the device
+ * @min: smallest I/O size in bytes
+ *
+ * Description:
+ * Storage devices may report a granularity or preferred minimum I/O
+ * size which is the smallest request the device can perform without
+ * incurring a performance penalty. For disk drives this is often the
+ * physical block size. For RAID arrays it is often the stripe chunk
+ * size. A properly aligned multiple of minimum_io_size is the
+ * preferred request size for workloads where a high number of I/O
+ * operations is desired.
+ */
void blk_queue_io_min(struct request_queue *q, unsigned int min)
{
- q->limits.io_min = min;
-
- if (q->limits.io_min < q->limits.logical_block_size)
- q->limits.io_min = q->limits.logical_block_size;
-
- if (q->limits.io_min < q->limits.physical_block_size)
- q->limits.io_min = q->limits.physical_block_size;
+ blk_limits_io_min(&q->limits, min);
}
EXPORT_SYMBOL(blk_queue_io_min);
@@ -405,8 +433,12 @@
* @opt: optimal request size in bytes
*
* Description:
- * Drivers can call this function to set the preferred I/O request
- * size for devices that report such a value.
+ * Storage devices may report an optimal I/O size, which is the
+ * device's preferred unit for sustained I/O. This is rarely reported
+ * for disk drives. For RAID arrays it is usually the stripe width or
+ * the internal track size. A properly aligned multiple of
+ * optimal_io_size is the preferred request size for workloads where
+ * sustained throughput is desired.
*/
void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
{
@@ -426,27 +458,7 @@
**/
void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
{
- /* zero is "infinity" */
- t->limits.max_sectors = min_not_zero(queue_max_sectors(t),
- queue_max_sectors(b));
-
- t->limits.max_hw_sectors = min_not_zero(queue_max_hw_sectors(t),
- queue_max_hw_sectors(b));
-
- t->limits.seg_boundary_mask = min_not_zero(queue_segment_boundary(t),
- queue_segment_boundary(b));
-
- t->limits.max_phys_segments = min_not_zero(queue_max_phys_segments(t),
- queue_max_phys_segments(b));
-
- t->limits.max_hw_segments = min_not_zero(queue_max_hw_segments(t),
- queue_max_hw_segments(b));
-
- t->limits.max_segment_size = min_not_zero(queue_max_segment_size(t),
- queue_max_segment_size(b));
-
- t->limits.logical_block_size = max(queue_logical_block_size(t),
- queue_logical_block_size(b));
+ blk_stack_limits(&t->limits, &b->limits, 0);
if (!t->queue_lock)
WARN_ON_ONCE(1);
@@ -516,6 +528,16 @@
return -1;
}
+ /* Find lcm() of optimal I/O size */
+ if (t->io_opt && b->io_opt)
+ t->io_opt = (t->io_opt * b->io_opt) / gcd(t->io_opt, b->io_opt);
+ else if (b->io_opt)
+ t->io_opt = b->io_opt;
+
+ /* Verify that optimal I/O size is a multiple of io_min */
+ if (t->io_min && t->io_opt % t->io_min)
+ return -1;
+
return 0;
}
EXPORT_SYMBOL(blk_stack_limits);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index b1cd040..418d636 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -16,9 +16,9 @@
};
static ssize_t
-queue_var_show(unsigned int var, char *page)
+queue_var_show(unsigned long var, char *page)
{
- return sprintf(page, "%d\n", var);
+ return sprintf(page, "%lu\n", var);
}
static ssize_t
@@ -77,7 +77,8 @@
static ssize_t queue_ra_show(struct request_queue *q, char *page)
{
- int ra_kb = q->backing_dev_info.ra_pages << (PAGE_CACHE_SHIFT - 10);
+ unsigned long ra_kb = q->backing_dev_info.ra_pages <<
+ (PAGE_CACHE_SHIFT - 10);
return queue_var_show(ra_kb, (page));
}
@@ -189,9 +190,9 @@
static ssize_t queue_rq_affinity_show(struct request_queue *q, char *page)
{
- unsigned int set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
+ bool set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
- return queue_var_show(set != 0, page);
+ return queue_var_show(set, page);
}
static ssize_t
diff --git a/block/bsg.c b/block/bsg.c
index e7d4752..5f184bb 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -186,7 +186,7 @@
return -EFAULT;
if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
- if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
+ if (blk_verify_command(rq->cmd, has_write_perm))
return -EPERM;
} else if (!capable(CAP_SYS_RAWIO))
return -EPERM;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 833ec18..fd7080e 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -71,6 +71,51 @@
#define CFQ_RB_ROOT (struct cfq_rb_root) { RB_ROOT, NULL, }
/*
+ * Per process-grouping structure
+ */
+struct cfq_queue {
+ /* reference count */
+ atomic_t ref;
+ /* various state flags, see below */
+ unsigned int flags;
+ /* parent cfq_data */
+ struct cfq_data *cfqd;
+ /* service_tree member */
+ struct rb_node rb_node;
+ /* service_tree key */
+ unsigned long rb_key;
+ /* prio tree member */
+ struct rb_node p_node;
+ /* prio tree root we belong to, if any */
+ struct rb_root *p_root;
+ /* sorted list of pending requests */
+ struct rb_root sort_list;
+ /* if fifo isn't expired, next request to serve */
+ struct request *next_rq;
+ /* requests queued in sort_list */
+ int queued[2];
+ /* currently allocated requests */
+ int allocated[2];
+ /* fifo list of requests in sort_list */
+ struct list_head fifo;
+
+ unsigned long slice_end;
+ long slice_resid;
+ unsigned int slice_dispatch;
+
+ /* pending metadata requests */
+ int meta_pending;
+ /* number of requests that are on the dispatch list or inside driver */
+ int dispatched;
+
+ /* io prio of this group */
+ unsigned short ioprio, org_ioprio;
+ unsigned short ioprio_class, org_ioprio_class;
+
+ pid_t pid;
+};
+
+/*
* Per block device queue structure
*/
struct cfq_data {
@@ -135,51 +180,11 @@
unsigned int cfq_slice_idle;
struct list_head cic_list;
-};
-/*
- * Per process-grouping structure
- */
-struct cfq_queue {
- /* reference count */
- atomic_t ref;
- /* various state flags, see below */
- unsigned int flags;
- /* parent cfq_data */
- struct cfq_data *cfqd;
- /* service_tree member */
- struct rb_node rb_node;
- /* service_tree key */
- unsigned long rb_key;
- /* prio tree member */
- struct rb_node p_node;
- /* prio tree root we belong to, if any */
- struct rb_root *p_root;
- /* sorted list of pending requests */
- struct rb_root sort_list;
- /* if fifo isn't expired, next request to serve */
- struct request *next_rq;
- /* requests queued in sort_list */
- int queued[2];
- /* currently allocated requests */
- int allocated[2];
- /* fifo list of requests in sort_list */
- struct list_head fifo;
-
- unsigned long slice_end;
- long slice_resid;
- unsigned int slice_dispatch;
-
- /* pending metadata requests */
- int meta_pending;
- /* number of requests that are on the dispatch list or inside driver */
- int dispatched;
-
- /* io prio of this group */
- unsigned short ioprio, org_ioprio;
- unsigned short ioprio_class, org_ioprio_class;
-
- pid_t pid;
+ /*
+ * Fallback dummy cfqq for extreme OOM conditions
+ */
+ struct cfq_queue oom_cfqq;
};
enum cfqq_state_flags {
@@ -1641,6 +1646,26 @@
ioc->ioprio_changed = 0;
}
+static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ pid_t pid, int is_sync)
+{
+ RB_CLEAR_NODE(&cfqq->rb_node);
+ RB_CLEAR_NODE(&cfqq->p_node);
+ INIT_LIST_HEAD(&cfqq->fifo);
+
+ atomic_set(&cfqq->ref, 0);
+ cfqq->cfqd = cfqd;
+
+ cfq_mark_cfqq_prio_changed(cfqq);
+
+ if (is_sync) {
+ if (!cfq_class_idle(cfqq))
+ cfq_mark_cfqq_idle_window(cfqq);
+ cfq_mark_cfqq_sync(cfqq);
+ }
+ cfqq->pid = pid;
+}
+
static struct cfq_queue *
cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
struct io_context *ioc, gfp_t gfp_mask)
@@ -1653,56 +1678,40 @@
/* cic always exists here */
cfqq = cic_to_cfqq(cic, is_sync);
- if (!cfqq) {
+ /*
+ * Always try a new alloc if we fell back to the OOM cfqq
+ * originally, since it should just be a temporary situation.
+ */
+ if (!cfqq || cfqq == &cfqd->oom_cfqq) {
+ cfqq = NULL;
if (new_cfqq) {
cfqq = new_cfqq;
new_cfqq = NULL;
} else if (gfp_mask & __GFP_WAIT) {
- /*
- * Inform the allocator of the fact that we will
- * just repeat this allocation if it fails, to allow
- * the allocator to do whatever it needs to attempt to
- * free memory.
- */
spin_unlock_irq(cfqd->queue->queue_lock);
new_cfqq = kmem_cache_alloc_node(cfq_pool,
- gfp_mask | __GFP_NOFAIL | __GFP_ZERO,
+ gfp_mask | __GFP_ZERO,
cfqd->queue->node);
spin_lock_irq(cfqd->queue->queue_lock);
- goto retry;
+ if (new_cfqq)
+ goto retry;
} else {
cfqq = kmem_cache_alloc_node(cfq_pool,
gfp_mask | __GFP_ZERO,
cfqd->queue->node);
- if (!cfqq)
- goto out;
}
- RB_CLEAR_NODE(&cfqq->rb_node);
- RB_CLEAR_NODE(&cfqq->p_node);
- INIT_LIST_HEAD(&cfqq->fifo);
-
- atomic_set(&cfqq->ref, 0);
- cfqq->cfqd = cfqd;
-
- cfq_mark_cfqq_prio_changed(cfqq);
-
- cfq_init_prio_data(cfqq, ioc);
-
- if (is_sync) {
- if (!cfq_class_idle(cfqq))
- cfq_mark_cfqq_idle_window(cfqq);
- cfq_mark_cfqq_sync(cfqq);
- }
- cfqq->pid = current->pid;
- cfq_log_cfqq(cfqd, cfqq, "alloced");
+ if (cfqq) {
+ cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
+ cfq_init_prio_data(cfqq, ioc);
+ cfq_log_cfqq(cfqd, cfqq, "alloced");
+ } else
+ cfqq = &cfqd->oom_cfqq;
}
if (new_cfqq)
kmem_cache_free(cfq_pool, new_cfqq);
-out:
- WARN_ON((gfp_mask & __GFP_WAIT) && !cfqq);
return cfqq;
}
@@ -1735,11 +1744,8 @@
cfqq = *async_cfqq;
}
- if (!cfqq) {
+ if (!cfqq)
cfqq = cfq_find_alloc_queue(cfqd, is_sync, ioc, gfp_mask);
- if (!cfqq)
- return NULL;
- }
/*
* pin the queue now that it's allocated, scheduler exit will prune it
@@ -2305,12 +2311,8 @@
goto queue_fail;
cfqq = cic_to_cfqq(cic, is_sync);
- if (!cfqq) {
+ if (!cfqq || cfqq == &cfqd->oom_cfqq) {
cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask);
-
- if (!cfqq)
- goto queue_fail;
-
cic_set_cfqq(cic, cfqq, is_sync);
}
@@ -2465,6 +2467,14 @@
for (i = 0; i < CFQ_PRIO_LISTS; i++)
cfqd->prio_trees[i] = RB_ROOT;
+ /*
+ * Our fallback cfqq if cfq_find_alloc_queue() runs into OOM issues.
+ * Grab a permanent reference to it, so that the normal code flow
+ * will not attempt to free it.
+ */
+ cfq_init_cfqq(cfqd, &cfqd->oom_cfqq, 1, 0);
+ atomic_inc(&cfqd->oom_cfqq.ref);
+
INIT_LIST_HEAD(&cfqd->cic_list);
cfqd->queue = q;
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
deleted file mode 100644
index 572bbc2..0000000
--- a/block/cmd-filter.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright 2004 Peter M. Jones <pjones@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public Licens
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
- *
- */
-
-#include <linux/list.h>
-#include <linux/genhd.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-
-#include <scsi/scsi.h>
-#include <linux/cdrom.h>
-
-int blk_verify_command(struct blk_cmd_filter *filter,
- unsigned char *cmd, fmode_t has_write_perm)
-{
- /* root can do any command. */
- if (capable(CAP_SYS_RAWIO))
- return 0;
-
- /* if there's no filter set, assume we're filtering everything out */
- if (!filter)
- return -EPERM;
-
- /* Anybody who can open the device can do a read-safe command */
- if (test_bit(cmd[0], filter->read_ok))
- return 0;
-
- /* Write-safe commands require a writable open */
- if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
- return 0;
-
- return -EPERM;
-}
-EXPORT_SYMBOL(blk_verify_command);
-
-#if 0
-/* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
- int rw)
-{
- char *npage = page;
- unsigned long *okbits;
- int i;
-
- if (rw == READ)
- okbits = filter->read_ok;
- else
- okbits = filter->write_ok;
-
- for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
- if (test_bit(i, okbits)) {
- npage += sprintf(npage, "0x%02x", i);
- if (i < BLK_SCSI_MAX_CMDS - 1)
- sprintf(npage++, " ");
- }
- }
-
- if (npage != page)
- npage += sprintf(npage, "\n");
-
- return npage - page;
-}
-
-static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
-{
- return rcf_cmds_show(filter, page, READ);
-}
-
-static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
- char *page)
-{
- return rcf_cmds_show(filter, page, WRITE);
-}
-
-static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
- const char *page, size_t count, int rw)
-{
- unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
- int cmd, set;
- char *p, *status;
-
- if (rw == READ) {
- memcpy(&okbits, filter->read_ok, sizeof(okbits));
- target_okbits = filter->read_ok;
- } else {
- memcpy(&okbits, filter->write_ok, sizeof(okbits));
- target_okbits = filter->write_ok;
- }
-
- while ((p = strsep((char **)&page, " ")) != NULL) {
- set = 1;
-
- if (p[0] == '+') {
- p++;
- } else if (p[0] == '-') {
- set = 0;
- p++;
- }
-
- cmd = simple_strtol(p, &status, 16);
-
- /* either of these cases means invalid input, so do nothing. */
- if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
- return -EINVAL;
-
- if (set)
- __set_bit(cmd, okbits);
- else
- __clear_bit(cmd, okbits);
- }
-
- memcpy(target_okbits, okbits, sizeof(okbits));
- return count;
-}
-
-static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
- const char *page, size_t count)
-{
- return rcf_cmds_store(filter, page, count, READ);
-}
-
-static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
- const char *page, size_t count)
-{
- return rcf_cmds_store(filter, page, count, WRITE);
-}
-
-struct rcf_sysfs_entry {
- struct attribute attr;
- ssize_t (*show)(struct blk_cmd_filter *, char *);
- ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
-};
-
-static struct rcf_sysfs_entry rcf_readcmds_entry = {
- .attr = { .name = "read_table", .mode = S_IRUGO | S_IWUSR },
- .show = rcf_readcmds_show,
- .store = rcf_readcmds_store,
-};
-
-static struct rcf_sysfs_entry rcf_writecmds_entry = {
- .attr = {.name = "write_table", .mode = S_IRUGO | S_IWUSR },
- .show = rcf_writecmds_show,
- .store = rcf_writecmds_store,
-};
-
-static struct attribute *default_attrs[] = {
- &rcf_readcmds_entry.attr,
- &rcf_writecmds_entry.attr,
- NULL,
-};
-
-#define to_rcf(atr) container_of((atr), struct rcf_sysfs_entry, attr)
-
-static ssize_t
-rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
-{
- struct rcf_sysfs_entry *entry = to_rcf(attr);
- struct blk_cmd_filter *filter;
-
- filter = container_of(kobj, struct blk_cmd_filter, kobj);
- if (entry->show)
- return entry->show(filter, page);
-
- return 0;
-}
-
-static ssize_t
-rcf_attr_store(struct kobject *kobj, struct attribute *attr,
- const char *page, size_t length)
-{
- struct rcf_sysfs_entry *entry = to_rcf(attr);
- struct blk_cmd_filter *filter;
-
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- if (!entry->store)
- return -EINVAL;
-
- filter = container_of(kobj, struct blk_cmd_filter, kobj);
- return entry->store(filter, page, length);
-}
-
-static struct sysfs_ops rcf_sysfs_ops = {
- .show = rcf_attr_show,
- .store = rcf_attr_store,
-};
-
-static struct kobj_type rcf_ktype = {
- .sysfs_ops = &rcf_sysfs_ops,
- .default_attrs = default_attrs,
-};
-
-int blk_register_filter(struct gendisk *disk)
-{
- int ret;
- struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
- ret = kobject_init_and_add(&filter->kobj, &rcf_ktype,
- &disk_to_dev(disk)->kobj,
- "%s", "cmd_filter");
- if (ret < 0)
- return ret;
-
- return 0;
-}
-EXPORT_SYMBOL(blk_register_filter);
-
-void blk_unregister_filter(struct gendisk *disk)
-{
- struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
- kobject_put(&filter->kobj);
-}
-EXPORT_SYMBOL(blk_unregister_filter);
-#endif
diff --git a/block/elevator.c b/block/elevator.c
index ca86192..2d511f9 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -100,6 +100,19 @@
if (bio_integrity(bio) != blk_integrity_rq(rq))
return 0;
+ /*
+ * Don't merge if failfast settings don't match.
+ *
+ * FIXME: The negation in front of each condition is necessary
+ * because bio and request flags use different bit positions
+ * and the accessors return those bits directly. This
+ * ugliness will soon go away.
+ */
+ if (!bio_failfast_dev(bio) != !blk_failfast_dev(rq) ||
+ !bio_failfast_transport(bio) != !blk_failfast_transport(rq) ||
+ !bio_failfast_driver(bio) != !blk_failfast_driver(rq))
+ return 0;
+
if (!elv_iosched_allow_merge(rq, bio))
return 0;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5f8e798..e5b1001 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -32,6 +32,11 @@
#include <scsi/scsi_ioctl.h>
#include <scsi/scsi_cmnd.h>
+struct blk_cmd_filter {
+ unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+ unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+} blk_default_cmd_filter;
+
/* Command group 3 is reserved and should never be used. */
const unsigned char scsi_command_size_tbl[8] =
{
@@ -105,7 +110,7 @@
return put_user(1, p);
}
-void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
+static void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
{
/* Basic read-only commands */
__set_bit(TEST_UNIT_READY, filter->read_ok);
@@ -187,14 +192,37 @@
__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
__set_bit(GPCMD_SET_READ_AHEAD, filter->write_ok);
}
-EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
+int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm)
+{
+ struct blk_cmd_filter *filter = &blk_default_cmd_filter;
+
+ /* root can do any command. */
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
+ /* if there's no filter set, assume we're filtering everything out */
+ if (!filter)
+ return -EPERM;
+
+ /* Anybody who can open the device can do a read-safe command */
+ if (test_bit(cmd[0], filter->read_ok))
+ return 0;
+
+ /* Write-safe commands require a writable open */
+ if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
+ return 0;
+
+ return -EPERM;
+}
+EXPORT_SYMBOL(blk_verify_command);
static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
struct sg_io_hdr *hdr, fmode_t mode)
{
if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
return -EFAULT;
- if (blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE))
+ if (blk_verify_command(rq->cmd, mode & FMODE_WRITE))
return -EPERM;
/*
@@ -427,7 +455,7 @@
if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
goto error;
- err = blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE);
+ err = blk_verify_command(rq->cmd, mode & FMODE_WRITE);
if (err)
goto error;
@@ -645,5 +673,11 @@
blk_put_queue(q);
return err;
}
-
EXPORT_SYMBOL(scsi_cmd_ioctl);
+
+int __init blk_scsi_ioctl_init(void)
+{
+ blk_set_cmd_filter_defaults(&blk_default_cmd_filter);
+ return 0;
+}
+fs_initcall(blk_scsi_ioctl_init);
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 95fe2c8..90dd3f8 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -300,7 +300,7 @@
static int __init async_xor_init(void)
{
- #ifdef CONFIG_DMA_ENGINE
+ #ifdef CONFIG_ASYNC_TX_DMA
/* To conserve stack space the input src_list (array of page pointers)
* is reused to hold the array of dma addresses passed to the driver.
* This conversion is only possible when dma_addr_t is less than the
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 7a0f4aa..9a62224 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -38,6 +38,9 @@
#define _COMPONENT ACPI_MEMORY_DEVICE_COMPONENT
+#undef PREFIX
+#define PREFIX "ACPI:memory_hp:"
+
ACPI_MODULE_NAME("acpi_memhotplug");
MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
MODULE_DESCRIPTION("Hotplug Mem Driver");
@@ -153,6 +156,7 @@
acpi_handle phandle;
struct acpi_device *device = NULL;
struct acpi_device *pdevice = NULL;
+ int result;
if (!acpi_bus_get_device(handle, &device) && device)
@@ -165,9 +169,9 @@
}
/* Get the parent device */
- status = acpi_bus_get_device(phandle, &pdevice);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot get acpi bus device"));
+ result = acpi_bus_get_device(phandle, &pdevice);
+ if (result) {
+ printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
return -EINVAL;
}
@@ -175,9 +179,9 @@
* Now add the notified device. This creates the acpi_device
* and invokes .add function
*/
- status = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Cannot add acpi bus"));
+ result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
+ if (result) {
+ printk(KERN_WARNING PREFIX "Cannot add acpi bus");
return -EINVAL;
}
@@ -238,7 +242,12 @@
num_enabled++;
continue;
}
-
+ /*
+ * If the memory block size is zero, please ignore it.
+ * Don't try to do the following memory hotplug flowchart.
+ */
+ if (!info->length)
+ continue;
if (node < 0)
node = memory_add_physaddr_to_nid(info->start_addr);
@@ -253,8 +262,15 @@
mem_device->state = MEMORY_INVALID_STATE;
return -EINVAL;
}
-
- return result;
+ /*
+ * Sometimes the memory device will contain several memory blocks.
+ * When one memory block is hot-added to the system memory, it will
+ * be regarded as a success.
+ * Otherwise if the last memory block can't be hot-added to the system
+ * memory, it will be failure and the memory device can't be bound with
+ * driver.
+ */
+ return 0;
}
static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 544dcf8..eb6f038 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -97,6 +97,7 @@
#define AOPOBJ_OBJECT_INITIALIZED 0x08
#define AOPOBJ_SETUP_COMPLETE 0x10
#define AOPOBJ_SINGLE_DATUM 0x20
+#define AOPOBJ_INVALID 0x40 /* Used if host OS won't allow an op_region address */
/******************************************************************************
*
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index 584d766..b79978f 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -397,6 +397,30 @@
status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
extra_desc->extra.aml_length,
extra_desc->extra.aml_start);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Validate the region address/length via the host OS */
+
+ status = acpi_os_validate_address(obj_desc->region.space_id,
+ obj_desc->region.address,
+ (acpi_size) obj_desc->region.length,
+ acpi_ut_get_node_name(node));
+
+ if (ACPI_FAILURE(status)) {
+ /*
+ * Invalid address/length. We will emit an error message and mark
+ * the region as invalid, so that it will cause an additional error if
+ * it is ever used. Then return AE_OK.
+ */
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During address validation of OpRegion [%4.4s]",
+ node->name.ascii));
+ obj_desc->common.flags |= AOPOBJ_INVALID;
+ status = AE_OK;
+ }
+
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index d4075b8..6687be1 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -113,6 +113,12 @@
}
}
+ /* Exit if Address/Length have been disallowed by the host OS */
+
+ if (rgn_desc->common.flags & AOPOBJ_INVALID) {
+ return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ }
+
/*
* Exit now for SMBus address space, it has a non-linear address space
* and the request cannot be directly validated
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 7167071..5691f16 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -189,11 +189,36 @@
return AE_OK;
}
+static void bind_to_cpu0(struct work_struct *work)
+{
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ kfree(work);
+}
+
+static void bind_workqueue(struct workqueue_struct *wq)
+{
+ struct work_struct *work;
+
+ work = kzalloc(sizeof(struct work_struct), GFP_KERNEL);
+ INIT_WORK(work, bind_to_cpu0);
+ queue_work(wq, work);
+}
+
acpi_status acpi_os_initialize1(void)
{
+ /*
+ * On some machines, a software-initiated SMI causes corruption unless
+ * the SMI runs on CPU 0. An SMI can be initiated by any AML, but
+ * typically it's done in GPE-related methods that are run via
+ * workqueues, so we can avoid the known corruption cases by binding
+ * the workqueues to CPU 0.
+ */
kacpid_wq = create_singlethread_workqueue("kacpid");
+ bind_workqueue(kacpid_wq);
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+ bind_workqueue(kacpi_notify_wq);
kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
+ bind_workqueue(kacpi_hotplug_wq);
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
BUG_ON(!kacpi_hotplug_wq);
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 8a5bf3b..55b5b90 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -395,7 +395,7 @@
fn = adr & 0xffff;
pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
- if (hnd == handle)
+ if (!pdev || hnd == handle)
break;
pbus = pdev->subordinate;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 01574a0..42159a2 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -397,6 +397,14 @@
},
},
{
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard HP G7000 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
+ },
+ },
+ {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 0944dae..9c61ab2 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -121,7 +121,7 @@
table_attr->attr.size = 0;
table_attr->attr.read = acpi_table_show;
table_attr->attr.attr.name = table_attr->name;
- table_attr->attr.attr.mode = 0444;
+ table_attr->attr.attr.mode = 0400;
return;
}
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 3d763fd..2466506 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -207,6 +207,16 @@
void __iomem *tmp;
int i, ret;
+ device_initialize(&dev->dev);
+
+ /*
+ * Copy from device_add
+ */
+ if (dev->dev.init_name) {
+ dev_set_name(&dev->dev, "%s", dev->dev.init_name);
+ dev->dev.init_name = NULL;
+ }
+
dev->dev.release = amba_device_release;
dev->dev.bus = &amba_bustype;
dev->dev.dma_mask = &dev->dma_mask;
@@ -240,7 +250,7 @@
goto err_release;
}
- ret = device_register(&dev->dev);
+ ret = device_add(&dev->dev);
if (ret)
goto err_release;
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 15a2303..fe3eba5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -219,6 +219,8 @@
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
/* ap->flags bits */
@@ -513,11 +515,16 @@
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+ { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -1658,6 +1665,7 @@
int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@@ -1696,12 +1704,21 @@
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, check_ready);
- /* link occupied, -ENODEV too is an error */
- if (rc) {
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_printk(link, KERN_INFO,
+ "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
reason = "device not ready";
goto fail;
- }
- *class = ahci_dev_classify(ap);
+ } else
+ *class = ahci_dev_classify(ap);
DPRINTK("EXIT, class=%u\n", *class);
return 0;
@@ -1768,7 +1785,8 @@
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
if (irq_sts & PORT_IRQ_BAD_PMP) {
ata_link_printk(link, KERN_WARNING,
- "failed due to HW bug, retry pmp=0\n");
+ "applying SB600 PMP SRST workaround "
+ "and retrying\n");
rc = ahci_do_softreset(link, class, 0, deadline,
ahci_check_ready);
}
@@ -2721,6 +2739,56 @@
return !ver || strcmp(ver, dmi->driver_data) < 0;
}
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func) \
+ (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * There are several gigabyte boards which use
+ * SIMG5723s configured as hardware RAID. Certain
+ * 5723 firmware revisions shipped there keep the link
+ * online but fail to answer properly to SRST or
+ * IDENTIFY when no device is attached downstream
+ * causing libata to retry quite a few times leading
+ * to excessive detection delay.
+ *
+ * As these firmwares respond to the second reset try
+ * with invalid device signature, considering unknown
+ * sig as offline works around the problem acceptably.
+ */
+ {
+ .ident = "EP45-DQ6",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+ },
+ {
+ .ident = "EP45-DS5",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+ },
+ .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+ },
+ { } /* terminate list */
+ };
+#undef ENCODE_BUSDEVFN
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int val;
+
+ if (!dmi)
+ return false;
+
+ val = (unsigned long)dmi->driver_data;
+
+ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -2836,6 +2904,12 @@
"BIOS update required for suspend/resume\n");
}
+ if (ahci_broken_online(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+ dev_info(&pdev->dev,
+ "online status unreliable, applying workaround\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d0a14cf..56b8a3f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -596,9 +596,12 @@
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
{ 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
+ { 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
+ { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */
{ 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
+ { 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 045a486..072ba5e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1515,6 +1515,7 @@
return rc;
}
+ dev->n_native_sectors = native_sectors;
/* nothing to do? */
if (native_sectors <= sectors || !ata_ignore_hpa) {
@@ -3392,17 +3393,27 @@
static int ata_dev_set_mode(struct ata_device *dev)
{
+ struct ata_port *ap = dev->link->ap;
struct ata_eh_context *ehc = &dev->link->eh_context;
+ const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
const char *dev_err_whine = "";
int ign_dev_err = 0;
- unsigned int err_mask;
+ unsigned int err_mask = 0;
int rc;
dev->flags &= ~ATA_DFLAG_PIO;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
- err_mask = ata_dev_set_xfermode(dev);
+ if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
+ dev_err_whine = " (SET_XFERMODE skipped)";
+ else {
+ if (nosetxfer)
+ ata_dev_printk(dev, KERN_WARNING,
+ "NOSETXFER but PATA detected - can't "
+ "skip SETXFER, might malfunction\n");
+ err_mask = ata_dev_set_xfermode(dev);
+ }
if (err_mask & ~AC_ERR_DEV)
goto fail;
@@ -4089,6 +4100,7 @@
unsigned int readid_flags)
{
u64 n_sectors = dev->n_sectors;
+ u64 n_native_sectors = dev->n_native_sectors;
int rc;
if (!ata_dev_enabled(dev))
@@ -4118,16 +4130,30 @@
/* verify n_sectors hasn't changed */
if (dev->class == ATA_DEV_ATA && n_sectors &&
dev->n_sectors != n_sectors) {
- ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+ ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
"%llu != %llu\n",
(unsigned long long)n_sectors,
(unsigned long long)dev->n_sectors);
-
- /* restore original n_sectors */
- dev->n_sectors = n_sectors;
-
- rc = -ENODEV;
- goto fail;
+ /*
+ * Something could have caused HPA to be unlocked
+ * involuntarily. If n_native_sectors hasn't changed
+ * and the new size matches it, keep the device.
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors > n_sectors &&
+ dev->n_sectors == n_native_sectors) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "new n_sectors matches native, probably "
+ "late HPA unlock, continuing\n");
+ /* keep using the old n_sectors */
+ dev->n_sectors = n_sectors;
+ } else {
+ /* restore original n_[native]_sectors and fail */
+ dev->n_native_sectors = n_native_sectors;
+ dev->n_sectors = n_sectors;
+ rc = -ENODEV;
+ goto fail;
+ }
}
return 0;
@@ -4276,6 +4302,9 @@
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
+ /* this one allows HPA unlocking but fails IOs on the area */
+ { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
+
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
@@ -4297,6 +4326,12 @@
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+ /*
+ * Devices which choke on SETXFER. Applies only if both the
+ * device and controller are SATA.
+ */
+ { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
+
/* End Marker */
{ }
};
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index fa22f94..79711b6 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2327,7 +2327,7 @@
struct ata_port *ap = link->ap;
struct ata_link *slave = ap->slave_link;
struct ata_eh_context *ehc = &link->eh_context;
- struct ata_eh_context *sehc = &slave->eh_context;
+ struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
unsigned int *classes = ehc->classes;
unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
@@ -2517,6 +2517,10 @@
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
rc = ata_do_reset(link, reset, classes, deadline, true);
+ if (rc) {
+ failed_link = link;
+ goto fail;
+ }
}
} else {
if (verbose)
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 4b27617..41c94b1 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -26,9 +26,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <mach/at91sam9260_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
#include <mach/board.h>
#include <mach/gpio.h>
@@ -44,65 +42,62 @@
unsigned long mode;
unsigned int cs;
+ struct clk *mck;
+
void __iomem *ide_addr;
void __iomem *alt_addr;
};
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
{
unsigned long mul;
- /*
- * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
- * x * (f / 1_000_000_000) =
- * x * ((f * 65536) / 1_000_000_000) / 65536 =
- * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
- */
+ /*
+ * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+ * x * (f / 1_000_000_000) =
+ * x * ((f * 65536) / 1_000_000_000) / 65536 =
+ * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+ */
- mul = (mck_hz / 10000) << 16;
- mul /= 100000;
+ mul = (mck_hz / 10000) << 16;
+ mul /= 100000;
- return (ns * mul + 65536) >> 16; /* rounding */
+ return (ns * mul + 65536) >> 16; /* rounding */
}
static void set_smc_mode(struct at91_ide_info *info)
{
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
- return;
+ at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+ return;
}
static void set_smc_timing(struct device *dev,
struct at91_ide_info *info, const struct ata_timing *ata)
{
- int read_cycle, write_cycle, active, recover;
- int nrd_setup, nrd_pulse, nrd_recover;
- int nwe_setup, nwe_pulse;
+ unsigned long read_cycle, write_cycle, active, recover;
+ unsigned long nrd_setup, nrd_pulse, nrd_recover;
+ unsigned long nwe_setup, nwe_pulse;
- int ncs_write_setup, ncs_write_pulse;
- int ncs_read_setup, ncs_read_pulse;
+ unsigned long ncs_write_setup, ncs_write_pulse;
+ unsigned long ncs_read_setup, ncs_read_pulse;
- unsigned int mck_hz;
- struct clk *mck;
+ unsigned long mck_hz;
read_cycle = ata->cyc8b;
nrd_setup = ata->setup;
nrd_pulse = ata->act8b;
nrd_recover = ata->rec8b;
- mck = clk_get(NULL, "mck");
- BUG_ON(IS_ERR(mck));
- mck_hz = clk_get_rate(mck);
+ mck_hz = clk_get_rate(info->mck);
read_cycle = calc_mck_cycles(read_cycle, mck_hz);
nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
- clk_put(mck);
-
active = nrd_setup + nrd_pulse;
recover = read_cycle - active;
@@ -121,13 +116,13 @@
ncs_write_setup = ncs_read_setup;
ncs_write_pulse = ncs_read_pulse;
- dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+ dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
nrd_setup, nrd_pulse, read_cycle);
- dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+ dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
nwe_setup, nwe_pulse, write_cycle);
- dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+ dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
ncs_read_setup, ncs_read_pulse);
- dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+ dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
ncs_write_setup, ncs_write_pulse);
at91_sys_write(AT91_SMC_SETUP(info->cs),
@@ -217,6 +212,7 @@
struct resource *mem_res;
struct ata_host *host;
struct ata_port *ap;
+
int irq_flags = 0;
int irq = 0;
int ret;
@@ -254,13 +250,20 @@
ata_port_desc(ap, "no IRQ, using PIO polling");
}
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(dev, "failed to allocate memory for private data\n");
return -ENOMEM;
}
+ info->mck = clk_get(NULL, "mck");
+
+ if (IS_ERR(info->mck)) {
+ dev_err(dev, "failed to get access to mck clock\n");
+ return -ENODEV;
+ }
+
info->cs = board->chipselect;
info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
@@ -272,7 +275,7 @@
if (!info->ide_addr) {
dev_err(dev, "failed to map IO base\n");
ret = -ENOMEM;
- goto err_ide_ioremap;
+ goto err_put;
}
info->alt_addr = devm_ioremap(dev,
@@ -281,7 +284,7 @@
if (!info->alt_addr) {
dev_err(dev, "failed to map CTL base\n");
ret = -ENOMEM;
- goto err_alt_ioremap;
+ goto err_put;
}
ap->ioaddr.cmd_addr = info->ide_addr;
@@ -300,33 +303,27 @@
irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_at91_sht);
-err_alt_ioremap:
- devm_iounmap(dev, info->ide_addr);
-
-err_ide_ioremap:
- kfree(info);
-
+err_put:
+ clk_put(info->mck);
return ret;
}
static int __devexit pata_at91_remove(struct platform_device *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- struct at91_ide_info *info = host->private_data;
- struct device *dev = &pdev->dev;
+ struct at91_ide_info *info;
if (!host)
return 0;
+ info = host->private_data;
ata_host_detach(host);
if (!info)
return 0;
- devm_iounmap(dev, info->ide_addr);
- devm_iounmap(dev, info->alt_addr);
+ clk_put(info->mck);
- kfree(info);
return 0;
}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index bec0b8a..4591556 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,6 +1,7 @@
/*
* pata_atiixp.c - ATI PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2009 Bartlomiej Zolnierkiewicz
*
* Based on
*
@@ -61,20 +62,19 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int dn = 2 * ap->port_no + adev->devno;
-
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
- u16 pio_mode_data, pio_timing_data;
+ u32 pio_timing_data;
+ u16 pio_mode_data;
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
pio_mode_data &= ~(0x7 << (4 * dn));
pio_mode_data |= pio << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
- pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
pio_timing_data &= ~(0xFF << timing_shift);
pio_timing_data |= (pio_timings[pio] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
}
/**
@@ -119,16 +119,17 @@
udma_mode_data |= dma << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
} else {
- u16 mwdma_timing_data;
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+ u32 mwdma_timing_data;
dma -= XFER_MW_DMA_0;
- pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ &mwdma_timing_data);
mwdma_timing_data &= ~(0xFF << timing_shift);
mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ mwdma_timing_data);
}
/*
* We must now look at the PIO mode situation. We may need to
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 8d9343a..abdd19f 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,7 +653,8 @@
ap = host->ports[i];
ocd = ap->dev->platform_data;
- if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+
+ if (ap->flags & ATA_FLAG_DISABLED)
continue;
ocd = ap->dev->platform_data;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index f4d009e..dc99e26 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -411,6 +411,7 @@
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+ PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 23714ae..c19417e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2514,7 +2514,7 @@
char *when = "idle";
ata_ehi_clear_desc(ehi);
- if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+ if (ap->flags & ATA_FLAG_DISABLED) {
when = "disabled";
} else if (edma_was_enabled) {
when = "EDMA enabled";
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2d11f3..86a4058 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -602,6 +602,7 @@
static int adma_enabled;
static int swncq_enabled = 1;
+static int msi_enabled;
static void nv_adma_register_mode(struct ata_port *ap)
{
@@ -2459,6 +2460,11 @@
} else if (type == SWNCQ)
nv_swncq_host_init(host);
+ if (msi_enabled) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+ pci_enable_msi(pdev);
+ }
+
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
IRQF_SHARED, ipriv->sht);
@@ -2558,4 +2564,6 @@
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 030ec07..35bd5cc 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -532,7 +532,7 @@
struct ata_port *ap = host->ports[i];
u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
- if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+ if (unlikely(ap->flags & ATA_FLAG_DISABLED))
continue;
/* turn off SATA_IRQ if not supported */
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index e8beb8e..05dd307 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -428,6 +428,9 @@
{
unsigned long flags;
+ /* Looks like an uninitialized device structure */
+ if (WARN_ON(dev->devres_head.next == NULL))
+ return -ENODEV;
spin_lock_irqsave(&dev->devres_lock, flags);
return release_nodes(dev, dev->devres_head.next, &dev->devres_head,
flags);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index ddeb819..7376367 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -180,7 +180,6 @@
goto err;
}
/* Pages will be freed by vfree() */
- fw_priv->pages = NULL;
fw_priv->page_array_size = 0;
fw_priv->nr_pages = 0;
complete(&fw_priv->completion);
@@ -217,8 +216,10 @@
ret_count = -ENODEV;
goto out;
}
- if (offset > fw->size)
- return 0;
+ if (offset > fw->size) {
+ ret_count = 0;
+ goto out;
+ }
if (count > fw->size - offset)
count = fw->size - offset;
@@ -357,7 +358,7 @@
kfree(fw_priv->pages);
kfree(fw_priv->fw_id);
kfree(fw_priv);
- put_device(dev);
+ kfree(dev);
module_put(THIS_MODULE);
}
@@ -408,13 +409,11 @@
if (retval) {
dev_err(device, "%s: device_register failed\n", __func__);
put_device(f_dev);
- goto error_kfree_fw_id;
+ return retval;
}
*dev_p = f_dev;
return 0;
-error_kfree_fw_id:
- kfree(fw_priv->fw_id);
error_kfree:
kfree(f_dev);
kfree(fw_priv);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 81cb01b..456594b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -483,9 +483,6 @@
drv->driver.remove = platform_drv_remove;
if (drv->shutdown)
drv->driver.shutdown = platform_drv_shutdown;
- if (drv->suspend || drv->resume)
- pr_warning("Platform driver '%s' needs updating - please use "
- "dev_pm_ops\n", drv->driver.name);
return driver_register(&drv->driver);
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index fae7254..58a3e57 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -762,6 +762,7 @@
dev->power.status = DPM_ON;
if (error == -EAGAIN) {
put_device(dev);
+ error = 0;
continue;
}
printk(KERN_ERR "PM: Failed to prepare device %s "
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 79a9ae5..0d90390 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -275,9 +275,9 @@
drv->add(sysdev);
}
mutex_unlock(&sysdev_drivers_lock);
+ kobject_uevent(&sysdev->kobj, KOBJ_ADD);
}
- kobject_uevent(&sysdev->kobj, KOBJ_ADD);
return error;
}
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 668dc23..1e6b7c1 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -36,6 +36,7 @@
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/proc_fs.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index bb72ada..1d886e0 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -298,6 +298,22 @@
If unsure, say N.
+config BLK_DEV_OSD
+ tristate "OSD object-as-blkdev support"
+ depends on SCSI_OSD_ULD
+ ---help---
+ Saying Y or M here will allow the exporting of a single SCSI
+ OSD (object-based storage) object as a Linux block device.
+
+ For example, if you create a 2G object on an OSD device,
+ you can then use this module to present that 2G object as
+ a Linux block device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called osdblk.
+
+ If unsure, say N.
+
config BLK_DEV_SX8
tristate "Promise SATA SX8 support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 7755a5e2..cdaa3f8 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
obj-$(CONFIG_MG_DISK) += mg_disk.o
obj-$(CONFIG_SUNVDC) += sunvdc.o
+obj-$(CONFIG_BLK_DEV_OSD) += osdblk.o
obj-$(CONFIG_BLK_DEV_UMEM) += umem.o
obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 9c6e5b0..2f07b7c 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1645,7 +1645,7 @@
{
int drive,drives,nomem;
- printk(KERN_INFO "FD: probing units\n" KERN_INFO "found ");
+ printk(KERN_INFO "FD: probing units\nfound ");
drives=0;
nomem=0;
for(drive=0;drive<FD_MAX_UNITS;drive++) {
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index f5e7180..3ff0294 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1627,7 +1627,7 @@
drive, dtp->blocks, dtp->spt, dtp->stretch);
/* sanity check */
- if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 ||
+ if (setprm.track != dtp->blocks/dtp->spt/2 ||
setprm.head != 2) {
redo_fd_request();
return -EINVAL;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index c7a527c..a52cc7f 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -26,6 +26,7 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/major.h>
#include <linux/fs.h>
@@ -226,8 +227,18 @@
static inline void removeQ(CommandList_struct *c)
{
- if (WARN_ON(hlist_unhashed(&c->list)))
+ /*
+ * After kexec/dump some commands might still
+ * be in flight, which the firmware will try
+ * to complete. Resetting the firmware doesn't work
+ * with old fw revisions, so we have to mark
+ * them off as 'stale' to prevent the driver from
+ * falling over.
+ */
+ if (WARN_ON(hlist_unhashed(&c->list))) {
+ c->cmd_type = CMD_MSG_STALE;
return;
+ }
hlist_del_init(&c->list);
}
@@ -4246,7 +4257,8 @@
while (!hlist_empty(&h->cmpQ)) {
c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
removeQ(c);
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ if (c->cmd_type != CMD_MSG_STALE)
+ c->err_info->CommandStatus = CMD_HARDWARE_ERR;
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
} else if (c->cmd_type == CMD_IOCTL_PEND)
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index cd665b0..dbaed1e 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -274,6 +274,7 @@
#define CMD_SCSI 0x03
#define CMD_MSG_DONE 0x04
#define CMD_MSG_TIMEOUT 0x05
+#define CMD_MSG_STALE 0xff
/* This structure needs to be divisible by 8 for new
* indexing method.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 862b40c..91b7530 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3327,7 +3327,10 @@
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
mutex_lock(&open_lock);
- LOCK_FDC(drive, 1);
+ if (lock_fdc(drive, 1)) {
+ mutex_unlock(&open_lock);
+ return -EINTR;
+ }
floppy_type[type] = *g;
floppy_type[type].name = "user format";
for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 801f4ab..5757188 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -61,7 +61,6 @@
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/loop.h>
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index f703f54..6d7fbaa 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -36,7 +36,6 @@
/* Register offsets */
#define MG_BUFF_OFFSET 0x8000
-#define MG_STORAGE_BUFFER_SIZE 0x200
#define MG_REG_OFFSET 0xC000
#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */
#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */
@@ -219,6 +218,16 @@
host->error = MG_ERR_NONE;
expire = jiffies + msecs_to_jiffies(msec);
+ /* These 2 times dummy status read prevents reading invalid
+ * status. A very little time (3 times of mflash operating clk)
+ * is required for busy bit is set. Use dummy read instead of
+ * busy wait, because mflash's PLL is machine dependent.
+ */
+ if (prv_data->use_polling) {
+ status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+ status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+ }
+
status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
do {
@@ -245,8 +254,6 @@
mg_dump_status("not ready", status, host);
return MG_ERR_INV_STAT;
}
- if (prv_data->use_polling)
- msleep(1);
status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
} while (time_before(cur_jiffies, expire));
@@ -469,9 +476,18 @@
return MG_ERR_NONE;
}
+static void mg_read_one(struct mg_host *host, struct request *req)
+{
+ u16 *buff = (u16 *)req->buffer;
+ u32 i;
+
+ for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+ *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+ (i << 1));
+}
+
static void mg_read(struct request *req)
{
- u32 j;
struct mg_host *host = req->rq_disk->private_data;
if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
@@ -482,49 +498,65 @@
blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
do {
- u16 *buff = (u16 *)req->buffer;
-
if (mg_wait(host, ATA_DRQ,
MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
- for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
- *buff++ = inw((unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
+
+ mg_read_one(host, req);
outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
}
+static void mg_write_one(struct mg_host *host, struct request *req)
+{
+ u16 *buff = (u16 *)req->buffer;
+ u32 i;
+
+ for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+ outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET +
+ (i << 1));
+}
+
static void mg_write(struct request *req)
{
- u32 j;
struct mg_host *host = req->rq_disk->private_data;
+ unsigned int rem = blk_rq_sectors(req);
- if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+ if (mg_out(host, blk_rq_pos(req), rem,
MG_CMD_WR, NULL) != MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
}
MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
- blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+ rem, blk_rq_pos(req), req->buffer);
+
+ if (mg_wait(host, ATA_DRQ,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ }
do {
- u16 *buff = (u16 *)req->buffer;
-
- if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
- mg_bad_rw_intr(host);
- return;
- }
- for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
- outw(*buff++, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
+ mg_write_one(host, req);
outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
+
+ rem--;
+ if (rem > 1 && mg_wait(host, ATA_DRQ,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ } else if (mg_wait(host, MG_STAT_READY,
+ MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+ mg_bad_rw_intr(host);
+ return;
+ }
} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
}
@@ -532,7 +564,6 @@
{
struct request *req = host->req;
u32 i;
- u16 *buff;
/* check status */
do {
@@ -550,13 +581,7 @@
return;
ok_to_read:
- /* get current segment of request */
- buff = (u16 *)req->buffer;
-
- /* read 1 sector */
- for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
- *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
- (i << 1));
+ mg_read_one(host, req);
MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
@@ -575,8 +600,7 @@
static void mg_write_intr(struct mg_host *host)
{
struct request *req = host->req;
- u32 i, j;
- u16 *buff;
+ u32 i;
bool rem;
/* check status */
@@ -597,12 +621,7 @@
ok_to_write:
if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
/* write 1 sector and set handler if remains */
- buff = (u16 *)req->buffer;
- for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
- outw(*buff, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (j << 1));
- buff++;
- }
+ mg_write_one(host, req);
MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
host->mg_do_intr = mg_write_intr;
@@ -667,9 +686,6 @@
unsigned int sect_num,
unsigned int sect_cnt)
{
- u16 *buff;
- u32 i;
-
switch (rq_data_dir(req)) {
case READ:
if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr)
@@ -693,12 +709,7 @@
mg_bad_rw_intr(host);
return host->error;
}
- buff = (u16 *)req->buffer;
- for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
- outw(*buff, (unsigned long)host->dev_base +
- MG_BUFF_OFFSET + (i << 1));
- buff++;
- }
+ mg_write_one(host, req);
mod_timer(&host->timer, jiffies + 3 * HZ);
outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
MG_REG_COMMAND);
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
new file mode 100644
index 0000000..13c1aee
--- /dev/null
+++ b/drivers/block/osdblk.c
@@ -0,0 +1,701 @@
+
+/*
+ osdblk.c -- Export a single SCSI OSD object as a Linux block device
+
+
+ Copyright 2009 Red Hat, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+ Instructions for use
+ --------------------
+
+ 1) Map a Linux block device to an existing OSD object.
+
+ In this example, we will use partition id 1234, object id 5678,
+ OSD device /dev/osd1.
+
+ $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add
+
+
+ 2) List all active blkdev<->object mappings.
+
+ In this example, we have performed step #1 twice, creating two blkdevs,
+ mapped to two separate OSD objects.
+
+ $ cat /sys/class/osdblk/list
+ 0 174 1234 5678 /dev/osd1
+ 1 179 1994 897123 /dev/osd0
+
+ The columns, in order, are:
+ - blkdev unique id
+ - blkdev assigned major
+ - OSD object partition id
+ - OSD object id
+ - OSD device
+
+
+ 3) Remove an active blkdev<->object mapping.
+
+ In this example, we remove the mapping with blkdev unique id 1.
+
+ $ echo 1 > /sys/class/osdblk/remove
+
+
+ NOTE: The actual creation and deletion of OSD objects is outside the scope
+ of this driver.
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <scsi/osd_initiator.h>
+#include <scsi/osd_attributes.h>
+#include <scsi/osd_sec.h>
+#include <scsi/scsi_device.h>
+
+#define DRV_NAME "osdblk"
+#define PFX DRV_NAME ": "
+
+/* #define _OSDBLK_DEBUG */
+#ifdef _OSDBLK_DEBUG
+#define OSDBLK_DEBUG(fmt, a...) \
+ printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a)
+#else
+#define OSDBLK_DEBUG(fmt, a...) \
+ do { if (0) printk(fmt, ##a); } while (0)
+#endif
+
+MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>");
+MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko");
+MODULE_LICENSE("GPL");
+
+struct osdblk_device;
+
+enum {
+ OSDBLK_MINORS_PER_MAJOR = 256, /* max minors per blkdev */
+ OSDBLK_MAX_REQ = 32, /* max parallel requests */
+ OSDBLK_OP_TIMEOUT = 4 * 60, /* sync OSD req timeout */
+};
+
+struct osdblk_request {
+ struct request *rq; /* blk layer request */
+ struct bio *bio; /* cloned bio */
+ struct osdblk_device *osdev; /* associated blkdev */
+};
+
+struct osdblk_device {
+ int id; /* blkdev unique id */
+
+ int major; /* blkdev assigned major */
+ struct gendisk *disk; /* blkdev's gendisk and rq */
+ struct request_queue *q;
+
+ struct osd_dev *osd; /* associated OSD */
+
+ char name[32]; /* blkdev name, e.g. osdblk34 */
+
+ spinlock_t lock; /* queue lock */
+
+ struct osd_obj_id obj; /* OSD partition, obj id */
+ uint8_t obj_cred[OSD_CAP_LEN]; /* OSD cred */
+
+ struct osdblk_request req[OSDBLK_MAX_REQ]; /* request table */
+
+ struct list_head node;
+
+ char osd_path[0]; /* OSD device path */
+};
+
+static struct class *class_osdblk; /* /sys/class/osdblk */
+static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */
+static LIST_HEAD(osdblkdev_list);
+
+static struct block_device_operations osdblk_bd_ops = {
+ .owner = THIS_MODULE,
+};
+
+static const struct osd_attr g_attr_logical_length = ATTR_DEF(
+ OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
+
+static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN],
+ const struct osd_obj_id *obj)
+{
+ osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
+}
+
+/* copied from exofs; move to libosd? */
+/*
+ * Perform a synchronous OSD operation. copied from exofs; move to libosd?
+ */
+static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential)
+{
+ int ret;
+
+ or->timeout = timeout;
+ ret = osd_finalize_request(or, 0, credential, NULL);
+ if (ret)
+ return ret;
+
+ ret = osd_execute_request(or);
+
+ /* osd_req_decode_sense(or, ret); */
+ return ret;
+}
+
+/*
+ * Perform an asynchronous OSD operation. copied from exofs; move to libosd?
+ */
+static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done,
+ void *caller_context, u8 *cred)
+{
+ int ret;
+
+ ret = osd_finalize_request(or, 0, cred, NULL);
+ if (ret)
+ return ret;
+
+ ret = osd_execute_request_async(or, async_done, caller_context);
+
+ return ret;
+}
+
+/* copied from exofs; move to libosd? */
+static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
+{
+ struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
+ void *iter = NULL;
+ int nelem;
+
+ do {
+ nelem = 1;
+ osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter);
+ if ((cur_attr.attr_page == attr->attr_page) &&
+ (cur_attr.attr_id == attr->attr_id)) {
+ attr->len = cur_attr.len;
+ attr->val_ptr = cur_attr.val_ptr;
+ return 0;
+ }
+ } while (iter);
+
+ return -EIO;
+}
+
+static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out)
+{
+ struct osd_request *or;
+ struct osd_attr attr;
+ int ret;
+
+ /* start request */
+ or = osd_start_request(osdev->osd, GFP_KERNEL);
+ if (!or)
+ return -ENOMEM;
+
+ /* create a get-attributes(length) request */
+ osd_req_get_attributes(or, &osdev->obj);
+
+ osd_req_add_get_attr_list(or, &g_attr_logical_length, 1);
+
+ /* execute op synchronously */
+ ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred);
+ if (ret)
+ goto out;
+
+ /* extract length from returned attribute info */
+ attr = g_attr_logical_length;
+ ret = extract_attr_from_req(or, &attr);
+ if (ret)
+ goto out;
+
+ *size_out = get_unaligned_be64(attr.val_ptr);
+
+out:
+ osd_end_request(or);
+ return ret;
+
+}
+
+static void osdblk_osd_complete(struct osd_request *or, void *private)
+{
+ struct osdblk_request *orq = private;
+ struct osd_sense_info osi;
+ int ret = osd_req_decode_sense(or, &osi);
+
+ if (ret) {
+ ret = -EIO;
+ OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret);
+ }
+
+ /* complete OSD request */
+ osd_end_request(or);
+
+ /* complete request passed to osdblk by block layer */
+ __blk_end_request_all(orq->rq, ret);
+}
+
+static void bio_chain_put(struct bio *chain)
+{
+ struct bio *tmp;
+
+ while (chain) {
+ tmp = chain;
+ chain = chain->bi_next;
+
+ bio_put(tmp);
+ }
+}
+
+static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask)
+{
+ struct bio *tmp, *new_chain = NULL, *tail = NULL;
+
+ while (old_chain) {
+ tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs);
+ if (!tmp)
+ goto err_out;
+
+ __bio_clone(tmp, old_chain);
+ tmp->bi_bdev = NULL;
+ gfpmask &= ~__GFP_WAIT;
+ tmp->bi_next = NULL;
+
+ if (!new_chain)
+ new_chain = tail = tmp;
+ else {
+ tail->bi_next = tmp;
+ tail = tmp;
+ }
+
+ old_chain = old_chain->bi_next;
+ }
+
+ return new_chain;
+
+err_out:
+ OSDBLK_DEBUG("bio_chain_clone with err\n");
+ bio_chain_put(new_chain);
+ return NULL;
+}
+
+static void osdblk_rq_fn(struct request_queue *q)
+{
+ struct osdblk_device *osdev = q->queuedata;
+
+ while (1) {
+ struct request *rq;
+ struct osdblk_request *orq;
+ struct osd_request *or;
+ struct bio *bio;
+ bool do_write, do_flush;
+
+ /* peek at request from block layer */
+ rq = blk_fetch_request(q);
+ if (!rq)
+ break;
+
+ /* filter out block requests we don't understand */
+ if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) {
+ blk_end_request_all(rq, 0);
+ continue;
+ }
+
+ /* deduce our operation (read, write, flush) */
+ /* I wish the block layer simplified cmd_type/cmd_flags/cmd[]
+ * into a clearly defined set of RPC commands:
+ * read, write, flush, scsi command, power mgmt req,
+ * driver-specific, etc.
+ */
+
+ do_flush = (rq->special == (void *) 0xdeadbeefUL);
+ do_write = (rq_data_dir(rq) == WRITE);
+
+ if (!do_flush) { /* osd_flush does not use a bio */
+ /* a bio clone to be passed down to OSD request */
+ bio = bio_chain_clone(rq->bio, GFP_ATOMIC);
+ if (!bio)
+ break;
+ } else
+ bio = NULL;
+
+ /* alloc internal OSD request, for OSD command execution */
+ or = osd_start_request(osdev->osd, GFP_ATOMIC);
+ if (!or) {
+ bio_chain_put(bio);
+ OSDBLK_DEBUG("osd_start_request with err\n");
+ break;
+ }
+
+ orq = &osdev->req[rq->tag];
+ orq->rq = rq;
+ orq->bio = bio;
+ orq->osdev = osdev;
+
+ /* init OSD command: flush, write or read */
+ if (do_flush)
+ osd_req_flush_object(or, &osdev->obj,
+ OSD_CDB_FLUSH_ALL, 0, 0);
+ else if (do_write)
+ osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+ bio, blk_rq_bytes(rq));
+ else
+ osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL,
+ bio, blk_rq_bytes(rq));
+
+ OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n",
+ do_flush ? "flush" : do_write ?
+ "write" : "read", blk_rq_bytes(rq),
+ blk_rq_pos(rq) * 512ULL);
+
+ /* begin OSD command execution */
+ if (osd_async_op(or, osdblk_osd_complete, orq,
+ osdev->obj_cred)) {
+ osd_end_request(or);
+ blk_requeue_request(q, rq);
+ bio_chain_put(bio);
+ OSDBLK_DEBUG("osd_execute_request_async with err\n");
+ break;
+ }
+
+ /* remove the special 'flush' marker, now that the command
+ * is executing
+ */
+ rq->special = NULL;
+ }
+}
+
+static void osdblk_prepare_flush(struct request_queue *q, struct request *rq)
+{
+ /* add driver-specific marker, to indicate that this request
+ * is a flush command
+ */
+ rq->special = (void *) 0xdeadbeefUL;
+}
+
+static void osdblk_free_disk(struct osdblk_device *osdev)
+{
+ struct gendisk *disk = osdev->disk;
+
+ if (!disk)
+ return;
+
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (disk->queue)
+ blk_cleanup_queue(disk->queue);
+ put_disk(disk);
+}
+
+static int osdblk_init_disk(struct osdblk_device *osdev)
+{
+ struct gendisk *disk;
+ struct request_queue *q;
+ int rc;
+ u64 obj_size = 0;
+
+ /* contact OSD, request size info about the object being mapped */
+ rc = osdblk_get_obj_size(osdev, &obj_size);
+ if (rc)
+ return rc;
+
+ /* create gendisk info */
+ disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR);
+ if (!disk)
+ return -ENOMEM;
+
+ sprintf(disk->disk_name, DRV_NAME "%d", osdev->id);
+ disk->major = osdev->major;
+ disk->first_minor = 0;
+ disk->fops = &osdblk_bd_ops;
+ disk->private_data = osdev;
+
+ /* init rq */
+ q = blk_init_queue(osdblk_rq_fn, &osdev->lock);
+ if (!q) {
+ put_disk(disk);
+ return -ENOMEM;
+ }
+
+ /* switch queue to TCQ mode; allocate tag map */
+ rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL);
+ if (rc) {
+ blk_cleanup_queue(q);
+ put_disk(disk);
+ return rc;
+ }
+
+ /* Set our limits to the lower device limits, because osdblk cannot
+ * sleep when allocating a lower-request and therefore cannot be
+ * bouncing.
+ */
+ blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
+
+ blk_queue_prep_rq(q, blk_queue_start_tag);
+ blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+
+ disk->queue = q;
+
+ q->queuedata = osdev;
+
+ osdev->disk = disk;
+ osdev->q = q;
+
+ /* finally, announce the disk to the world */
+ set_capacity(disk, obj_size / 512ULL);
+ add_disk(disk);
+
+ printk(KERN_INFO "%s: Added of size 0x%llx\n",
+ disk->disk_name, (unsigned long long)obj_size);
+
+ return 0;
+}
+
+/********************************************************************
+ * /sys/class/osdblk/
+ * add map OSD object to blkdev
+ * remove unmap OSD object
+ * list show mappings
+ *******************************************************************/
+
+static void class_osdblk_release(struct class *cls)
+{
+ kfree(cls);
+}
+
+static ssize_t class_osdblk_list(struct class *c, char *data)
+{
+ int n = 0;
+ struct list_head *tmp;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ list_for_each(tmp, &osdblkdev_list) {
+ struct osdblk_device *osdev;
+
+ osdev = list_entry(tmp, struct osdblk_device, node);
+
+ n += sprintf(data+n, "%d %d %llu %llu %s\n",
+ osdev->id,
+ osdev->major,
+ osdev->obj.partition,
+ osdev->obj.id,
+ osdev->osd_path);
+ }
+
+ mutex_unlock(&ctl_mutex);
+ return n;
+}
+
+static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count)
+{
+ struct osdblk_device *osdev;
+ ssize_t rc;
+ int irc, new_id = 0;
+ struct list_head *tmp;
+
+ if (!try_module_get(THIS_MODULE))
+ return -ENODEV;
+
+ /* new osdblk_device object */
+ osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL);
+ if (!osdev) {
+ rc = -ENOMEM;
+ goto err_out_mod;
+ }
+
+ /* static osdblk_device initialization */
+ spin_lock_init(&osdev->lock);
+ INIT_LIST_HEAD(&osdev->node);
+
+ /* generate unique id: find highest unique id, add one */
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ list_for_each(tmp, &osdblkdev_list) {
+ struct osdblk_device *osdev;
+
+ osdev = list_entry(tmp, struct osdblk_device, node);
+ if (osdev->id > new_id)
+ new_id = osdev->id + 1;
+ }
+
+ osdev->id = new_id;
+
+ /* add to global list */
+ list_add_tail(&osdev->node, &osdblkdev_list);
+
+ mutex_unlock(&ctl_mutex);
+
+ /* parse add command */
+ if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id,
+ osdev->osd_path) != 3) {
+ rc = -EINVAL;
+ goto err_out_slot;
+ }
+
+ /* initialize rest of new object */
+ sprintf(osdev->name, DRV_NAME "%d", osdev->id);
+
+ /* contact requested OSD */
+ osdev->osd = osduld_path_lookup(osdev->osd_path);
+ if (IS_ERR(osdev->osd)) {
+ rc = PTR_ERR(osdev->osd);
+ goto err_out_slot;
+ }
+
+ /* build OSD credential */
+ osdblk_make_credential(osdev->obj_cred, &osdev->obj);
+
+ /* register our block device */
+ irc = register_blkdev(0, osdev->name);
+ if (irc < 0) {
+ rc = irc;
+ goto err_out_osd;
+ }
+
+ osdev->major = irc;
+
+ /* set up and announce blkdev mapping */
+ rc = osdblk_init_disk(osdev);
+ if (rc)
+ goto err_out_blkdev;
+
+ return count;
+
+err_out_blkdev:
+ unregister_blkdev(osdev->major, osdev->name);
+err_out_osd:
+ osduld_put_device(osdev->osd);
+err_out_slot:
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ list_del_init(&osdev->node);
+ mutex_unlock(&ctl_mutex);
+
+ kfree(osdev);
+err_out_mod:
+ OSDBLK_DEBUG("Error adding device %s\n", buf);
+ module_put(THIS_MODULE);
+ return rc;
+}
+
+static ssize_t class_osdblk_remove(struct class *c, const char *buf,
+ size_t count)
+{
+ struct osdblk_device *osdev = NULL;
+ int target_id, rc;
+ unsigned long ul;
+ struct list_head *tmp;
+
+ rc = strict_strtoul(buf, 10, &ul);
+ if (rc)
+ return rc;
+
+ /* convert to int; abort if we lost anything in the conversion */
+ target_id = (int) ul;
+ if (target_id != ul)
+ return -EINVAL;
+
+ /* remove object from list immediately */
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ list_for_each(tmp, &osdblkdev_list) {
+ osdev = list_entry(tmp, struct osdblk_device, node);
+ if (osdev->id == target_id) {
+ list_del_init(&osdev->node);
+ break;
+ }
+ osdev = NULL;
+ }
+
+ mutex_unlock(&ctl_mutex);
+
+ if (!osdev)
+ return -ENOENT;
+
+ /* clean up and free blkdev and associated OSD connection */
+ osdblk_free_disk(osdev);
+ unregister_blkdev(osdev->major, osdev->name);
+ osduld_put_device(osdev->osd);
+ kfree(osdev);
+
+ /* release module ref */
+ module_put(THIS_MODULE);
+
+ return count;
+}
+
+static struct class_attribute class_osdblk_attrs[] = {
+ __ATTR(add, 0200, NULL, class_osdblk_add),
+ __ATTR(remove, 0200, NULL, class_osdblk_remove),
+ __ATTR(list, 0444, class_osdblk_list, NULL),
+ __ATTR_NULL
+};
+
+static int osdblk_sysfs_init(void)
+{
+ int ret = 0;
+
+ /*
+ * create control files in sysfs
+ * /sys/class/osdblk/...
+ */
+ class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL);
+ if (!class_osdblk)
+ return -ENOMEM;
+
+ class_osdblk->name = DRV_NAME;
+ class_osdblk->owner = THIS_MODULE;
+ class_osdblk->class_release = class_osdblk_release;
+ class_osdblk->class_attrs = class_osdblk_attrs;
+
+ ret = class_register(class_osdblk);
+ if (ret) {
+ kfree(class_osdblk);
+ class_osdblk = NULL;
+ printk(PFX "failed to create class osdblk\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void osdblk_sysfs_cleanup(void)
+{
+ if (class_osdblk)
+ class_destroy(class_osdblk);
+ class_osdblk = NULL;
+}
+
+static int __init osdblk_init(void)
+{
+ int rc;
+
+ rc = osdblk_sysfs_init();
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+static void __exit osdblk_exit(void)
+{
+ osdblk_sysfs_cleanup();
+}
+
+module_init(osdblk_init);
+module_exit(osdblk_exit);
+
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 83650e0..99a506f 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -1372,8 +1372,10 @@
wakeup = (pd->write_congestion_on > 0
&& pd->bio_queue_size <= pd->write_congestion_off);
spin_unlock(&pd->lock);
- if (wakeup)
- clear_bdi_congested(&pd->disk->queue->backing_dev_info, WRITE);
+ if (wakeup) {
+ clear_bdi_congested(&pd->disk->queue->backing_dev_info,
+ BLK_RW_ASYNC);
+ }
pkt->sleep_time = max(PACKET_WAIT_TIME, 1);
pkt_set_state(pkt, PACKET_WAITING_STATE);
@@ -2592,10 +2594,10 @@
spin_lock(&pd->lock);
if (pd->write_congestion_on > 0
&& pd->bio_queue_size >= pd->write_congestion_on) {
- set_bdi_congested(&q->backing_dev_info, WRITE);
+ set_bdi_congested(&q->backing_dev_info, BLK_RW_ASYNC);
do {
spin_unlock(&pd->lock);
- congestion_wait(WRITE, HZ);
+ congestion_wait(BLK_RW_ASYNC, HZ);
spin_lock(&pd->lock);
} while(pd->bio_queue_size > pd->write_congestion_off);
}
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 43db3ea..aa1a3d5 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -213,7 +213,7 @@
* Only allow the generic SCSI ioctls if the host can support it.
*/
if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
- return -ENOIOCTLCMD;
+ return -ENOTTY;
return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
}
@@ -360,6 +360,9 @@
blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
+ /* No need to bounce any requests */
+ blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+
/* No real sector limit. */
blk_queue_max_sectors(vblk->disk->queue, -1U);
@@ -424,7 +427,12 @@
VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY
};
-static struct virtio_driver virtio_blk = {
+/*
+ * virtio_blk causes spurious section mismatch warning by
+ * simultaneously referring to a __devinit and a __devexit function.
+ * Use __refdata to avoid this warning.
+ */
+static struct virtio_driver __refdata virtio_blk = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index f08491a..b20abe10 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -390,9 +390,10 @@
static void ace_dump_regs(struct ace_device *ace)
{
- dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
- KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n"
- KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
+ dev_info(ace->dev,
+ " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
+ " status:%.8x mpu_lba:%.8x busmode:%4x\n"
+ " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
ace_in32(ace, ACE_CTRL),
ace_in(ace, ACE_SECCNTCMD),
ace_in(ace, ACE_VERSION),
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 4575171..b259040 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -374,7 +374,7 @@
static void __exit z2_exit(void)
{
int i, j;
- blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), 256);
+ blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), Z2MINOR_COUNT);
unregister_blkdev(Z2RAM_MAJOR, DEVICE_NAME);
del_gendisk(z2ram_gendisk);
put_disk(z2ram_gendisk);
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 1df9dda..d5cde6d 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -28,7 +28,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/sched.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 0bd01f4..6a06913 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1029,10 +1029,6 @@
If compiled as a module, it will be called cs5535_gpio.
-config GPIO_VR41XX
- tristate "NEC VR4100 series General-purpose I/O Unit support"
- depends on CPU_VR41XX
-
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN)"
depends on BLOCK
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 189efcf..66f779a 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -95,7 +95,6 @@
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
-obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index f4bb43f..e077701 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -225,7 +225,7 @@
.configure = parisc_agp_configure,
.fetch_size = parisc_agp_fetch_size,
.tlb_flush = parisc_agp_tlbflush,
- .mask_memory = parisc_agp_mask_memory,
+ .mask_memory = parisc_agp_page_mask_memory,
.masks = parisc_agp_masks,
.agp_enable = parisc_agp_enable,
.cache_flush = global_cache_flush,
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 72429b6..6c32fbf 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -81,6 +81,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/bitops.h>
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 140ea10..c02db01f7 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -27,6 +27,7 @@
#include <linux/cdev.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <asm/pgtable.h>
#include <asm/io.h>
/*
@@ -75,12 +76,13 @@
static int bsr_major;
enum {
- BSR_8 = 0,
- BSR_16 = 1,
- BSR_64 = 2,
- BSR_128 = 3,
- BSR_UNKNOWN = 4,
- BSR_MAX = 5,
+ BSR_8 = 0,
+ BSR_16 = 1,
+ BSR_64 = 2,
+ BSR_128 = 3,
+ BSR_4096 = 4,
+ BSR_UNKNOWN = 5,
+ BSR_MAX = 6,
};
static unsigned bsr_types[BSR_MAX];
@@ -117,15 +119,22 @@
{
unsigned long size = vma->vm_end - vma->vm_start;
struct bsr_dev *dev = filp->private_data;
+ int ret;
- if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
- return -EINVAL;
-
- vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
- size, vma->vm_page_prot))
+ /* check for the case of a small BSR device and map one 4k page for it*/
+ if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
+ ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
+ vma->vm_page_prot);
+ else if (size <= dev->bsr_len)
+ ret = io_remap_pfn_range(vma, vma->vm_start,
+ dev->bsr_addr >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+ else
+ return -EINVAL;
+
+ if (ret)
return -EAGAIN;
return 0;
@@ -205,6 +214,11 @@
cur->bsr_stride = bsr_stride[i];
cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs);
+ /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
+ /* we can only map 4k of it, so only advertise the 4k in sysfs */
+ if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
+ cur->bsr_len = 4096;
+
switch(cur->bsr_bytes) {
case 8:
cur->bsr_type = BSR_8;
@@ -218,9 +232,11 @@
case 128:
cur->bsr_type = BSR_128;
break;
+ case 4096:
+ cur->bsr_type = BSR_4096;
+ break;
default:
cur->bsr_type = BSR_UNKNOWN;
- printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
}
cur->bsr_num = bsr_types[cur->bsr_type];
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index f3366d3..2dafc2d 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -633,6 +633,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index abef1f7..ff647ca 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -36,6 +36,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 94e7e3c..d97779e 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -552,7 +552,7 @@
struct hvc_struct *hp = tty->driver_data;
if (!hp)
- return -1;
+ return 0;
return hp->n_outbuf;
}
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 5dcbe60..91b53eb 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -305,10 +305,11 @@
(BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))
== BIOS_CNTL_LOCK_ENABLE_MASK) {
static __initdata /*const*/ char warning[] =
- KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n"
- KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n"
- KERN_WARNING PFX "you are certain that your system has a functional\n"
- KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n";
+ KERN_WARNING
+PFX "Firmware space is locked read-only. If you can't or\n"
+PFX "don't want to disable this in firmware setup, and if\n"
+PFX "you are certain that your system has a functional\n"
+PFX "RNG, try using the 'no_fwh_detect' option.\n";
if (no_fwh_detect)
return -ENODEV;
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4159292..4f1f4cd 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -122,6 +122,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
@@ -1478,10 +1479,10 @@
status = inw(base + 0x4);
if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected load header:\n"
- KERN_WARNING "Address:0x%x\n"
- KERN_WARNING "Count:0x%x\n"
- KERN_WARNING "Status:0x%x\n",
- index + 1, frame->addr, frame->count, status);
+ "Address:0x%x\n"
+ "Count:0x%x\n"
+ "Status:0x%x\n",
+ index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
outsw(base, frame->data, word_count);
@@ -1526,10 +1527,10 @@
status = inw(base + 0x4);
if (status != 0) {
dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
- KERN_WARNING "Address:0x%x\n"
- KERN_WARNING "Count:0x%x\n"
- KERN_WARNING "Status: 0x%x\n",
- index + 1, frame->addr, frame->count, status);
+ "Address:0x%x\n"
+ "Count:0x%x\n"
+ "Status: 0x%x\n",
+ index + 1, frame->addr, frame->count, status);
goto errrelfw;
}
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 0c999f5..ab2f334 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 65b6ff2..dd0083b 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -34,6 +34,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 52d953e..dbf8d52 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -23,6 +23,7 @@
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 1c43c8c..c68118e 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -97,6 +97,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
+#include <linux/smp_lock.h>
#include <linux/string.h> /* used in new tty drivers */
#include <linux/signal.h> /* used in new tty drivers */
#include <linux/if.h>
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 2e99158..6934025 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -58,6 +58,7 @@
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h> /* used in new tty drivers */
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 94a5d50..973be2f 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1331,9 +1331,6 @@
static void n_tty_write_wakeup(struct tty_struct *tty)
{
- /* Write out any echoed characters that are still pending */
- process_echoes(tty);
-
if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
}
@@ -1586,6 +1583,7 @@
static inline int input_available_p(struct tty_struct *tty, int amt)
{
+ tty_flush_to_ldisc(tty);
if (tty->icanon) {
if (tty->canon_data)
return 1;
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 574f1c7..ec58d8c 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -828,7 +828,7 @@
struct port *port = &dc->port[index];
void __iomem *addr = port->dl_addr[port->toggle_dl];
struct tty_struct *tty = tty_port_tty_get(&port->port);
- int i;
+ int i, ret;
if (unlikely(!tty)) {
DBG1("tty not open for port: %d?", index);
@@ -844,12 +844,14 @@
/* disable interrupt in downlink... */
disable_transmit_dl(index, dc);
- return 0;
+ ret = 0;
+ goto put;
}
if (unlikely(size == 0)) {
dev_err(&dc->pdev->dev, "size == 0?\n");
- return 1;
+ ret = 1;
+ goto put;
}
tty_buffer_request_room(tty, size);
@@ -871,8 +873,10 @@
}
set_bit(index, &dc->flip);
+ ret = 1;
+put:
tty_kref_put(tty);
- return 1;
+ return ret;
}
/* Debug for interrupts */
@@ -1862,16 +1866,14 @@
{
struct port *port = tty->driver_data;
struct nozomi *dc = get_dc_by_tty(tty);
- s32 rval;
+ s32 rval = 0;
if (unlikely(!dc || !port)) {
- rval = -ENODEV;
goto exit_in_buffer;
}
if (unlikely(!port->port.count)) {
dev_err(&dc->pdev->dev, "No tty open?\n");
- rval = -ENODEV;
goto exit_in_buffer;
}
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 569f2f7..674b3ab 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -320,10 +320,10 @@
struct ipw_tty *tty = linux_tty->driver_data;
if (!tty)
- return -ENODEV;
+ return 0;
if (!tty->open_count)
- return -EINVAL;
+ return 0;
return tty->tx_bytes_queued;
}
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index daebe1b..d083c73 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -22,6 +22,7 @@
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/sysctl.h>
#include <linux/device.h>
#include <linux/uaccess.h>
@@ -75,114 +76,90 @@
*/
static void pty_unthrottle(struct tty_struct *tty)
{
- struct tty_struct *o_tty = tty->link;
-
- if (!o_tty)
- return;
-
- tty_wakeup(o_tty);
+ tty_wakeup(tty->link);
set_bit(TTY_THROTTLED, &tty->flags);
}
-/*
- * WSH 05/24/97: modified to
- * (1) use space in tty->flip instead of a shared temp buffer
- * The flip buffers aren't being used for a pty, so there's lots
- * of space available. The buffer is protected by a per-pty
- * semaphore that should almost never come under contention.
- * (2) avoid redundant copying for cases where count >> receive_room
- * N.B. Calls from user space may now return an error code instead of
- * a count.
+/**
+ * pty_space - report space left for writing
+ * @to: tty we are writing into
*
- * FIXME: Our pty_write method is called with our ldisc lock held but
- * not our partners. We can't just wait on the other one blindly without
- * risking deadlocks. At some point when everything has settled down we need
- * to look into making pty_write at least able to sleep over an ldisc change.
- *
- * The return on no ldisc is a bit counter intuitive but the logic works
- * like this. During an ldisc change the other end will flush its buffers. We
- * thus return the full length which is identical to the case where we had
- * proper locking and happened to queue the bytes just before the flush during
- * the ldisc change.
+ * The tty buffers allow 64K but we sneak a peak and clip at 8K this
+ * allows a lot of overspill room for echo and other fun messes to
+ * be handled properly
*/
+
+static int pty_space(struct tty_struct *to)
+{
+ int n = 8192 - to->buf.memory_used;
+ if (n < 0)
+ return 0;
+ return n;
+}
+
+/**
+ * pty_write - write to a pty
+ * @tty: the tty we write from
+ * @buf: kernel buffer of data
+ * @count: bytes to write
+ *
+ * Our "hardware" write method. Data is coming from the ldisc which
+ * may be in a non sleeping state. We simply throw this at the other
+ * end of the link as if we were an IRQ handler receiving stuff for
+ * the other side of the pty/tty pair.
+ */
+
static int pty_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct tty_struct *to = tty->link;
- struct tty_ldisc *ld;
- int c = count;
+ int c;
- if (!to || tty->stopped)
+ if (tty->stopped)
return 0;
- ld = tty_ldisc_ref(to);
- if (ld) {
- c = to->receive_room;
- if (c > count)
- c = count;
- ld->ops->receive_buf(to, buf, NULL, c);
- tty_ldisc_deref(ld);
+ /* This isn't locked but our 8K is quite sloppy so no
+ big deal */
+
+ c = pty_space(to);
+ if (c > count)
+ c = count;
+ if (c > 0) {
+ /* Stuff the data into the input queue of the other end */
+ c = tty_insert_flip_string(to, buf, c);
+ /* And shovel */
+ tty_flip_buffer_push(to);
+ tty_wakeup(tty);
}
return c;
}
+/**
+ * pty_write_room - write space
+ * @tty: tty we are writing from
+ *
+ * Report how many bytes the ldisc can send into the queue for
+ * the other device.
+ */
+
static int pty_write_room(struct tty_struct *tty)
{
- struct tty_struct *to = tty->link;
-
- if (!to || tty->stopped)
+ if (tty->stopped)
return 0;
-
- return to->receive_room;
+ return pty_space(tty->link);
}
-/*
- * WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior
- * The chars_in_buffer() value is used by the ldisc select() function
- * to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
- * The pty driver chars_in_buffer() Master/Slave must behave differently:
+/**
+ * pty_chars_in_buffer - characters currently in our tx queue
+ * @tty: our tty
*
- * The Master side needs to allow typed-ahead commands to accumulate
- * while being canonicalized, so we report "our buffer" as empty until
- * some threshold is reached, and then report the count. (Any count >
- * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
- * the count returned must be 0 if no canonical data is available to be
- * read. (The N_TTY ldisc.chars_in_buffer now knows this.)
- *
- * The Slave side passes all characters in raw mode to the Master side's
- * buffer where they can be read immediately, so in this case we can
- * return the true count in the buffer.
+ * Report how much we have in the transmit queue. As everything is
+ * instantly at the other end this is easy to implement.
*/
+
static int pty_chars_in_buffer(struct tty_struct *tty)
{
- struct tty_struct *to = tty->link;
- struct tty_ldisc *ld;
- int count = 0;
-
- /* We should get the line discipline lock for "tty->link" */
- if (!to)
- return 0;
- /* We cannot take a sleeping reference here without deadlocking with
- an ldisc change - but it doesn't really matter */
- ld = tty_ldisc_ref(to);
- if (ld == NULL)
- return 0;
-
- /* The ldisc must report 0 if no characters available to be read */
- if (ld->ops->chars_in_buffer)
- count = ld->ops->chars_in_buffer(to);
-
- tty_ldisc_deref(ld);
-
- if (tty->driver->subtype == PTY_TYPE_SLAVE)
- return count;
-
- /* Master side driver ... if the other side's read buffer is less than
- * half full, return 0 to allow writers to proceed; otherwise return
- * the count. This leaves a comfortable margin to avoid overflow,
- * and still allows half a buffer's worth of typed-ahead commands.
- */
- return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
+ return 0;
}
/* Set the lock flag on a pty */
@@ -202,20 +179,10 @@
{
struct tty_struct *to = tty->link;
unsigned long flags;
- struct tty_ldisc *ld;
if (!to)
return;
- ld = tty_ldisc_ref(to);
-
- /* The other end is changing discipline */
- if (!ld)
- return;
-
- if (ld->ops->flush_buffer)
- to->ldisc->ops->flush_buffer(to);
- tty_ldisc_deref(ld);
-
+ /* tty_buffer_flush(to); FIXME */
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index ce81da5..d58c2eb 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -44,6 +44,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/miscdevice.h>
#include <linux/init.h>
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 2176604..171711a 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -47,6 +47,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/tty_flip.h>
+#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 63d5b62..0e29a23 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -73,6 +73,7 @@
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index f1f24f0..51e7a46 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -52,6 +52,7 @@
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/serialP.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index e72be41..268e17f 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -87,6 +87,7 @@
#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/serial.h>
+#include <linux/smp_lock.h>
#include <linux/fcntl.h>
#include <linux/major.h>
#include <linux/delay.h>
@@ -1808,10 +1809,10 @@
if (clear & TIOCM_DTR)
port->MSVR &= ~MSVR_DTR;
}
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
return 0;
@@ -1832,11 +1833,11 @@
port->break_length = SPECIALIX_TPS / HZ * length;
port->COR2 |= COR2_ETC;
port->IER |= IER_TXRDY;
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_COR2, port->COR2);
sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
@@ -2022,9 +2023,9 @@
if (sx_crtscts(tty))
port->MSVR |= MSVR_DTR;
/* Else clause: see remark in "sx_throttle"... */
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
if (I_IXOFF(tty)) {
spin_unlock_irqrestore(&port->lock, flags);
sx_wait_CCR(bp);
@@ -2034,9 +2035,9 @@
sx_wait_CCR(bp);
spin_lock_irqsave(&port->lock, flags);
}
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
@@ -2060,10 +2061,10 @@
spin_lock_irqsave(&port->lock, flags);
port->IER &= ~IER_TXRDY;
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
spin_unlock_irqrestore(&port->lock, flags);
func_exit();
@@ -2088,10 +2089,10 @@
spin_lock_irqsave(&port->lock, flags);
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
- spin_lock_irqsave(&bp->lock, flags);
+ spin_lock(&bp->lock);
sx_out(bp, CD186x_CAR, port_No(port));
sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
+ spin_unlock(&bp->lock);
}
spin_unlock_irqrestore(&port->lock, flags);
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 518f2a2..a81ec4f 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -216,6 +216,7 @@
#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/bitops.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index afded3a..813552f 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -81,6 +81,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index a2e67e6..91f20a9 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -62,6 +62,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 6f727e3..8d4a2a8 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -52,6 +52,7 @@
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 0db3585..5d7a02f 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -35,7 +35,6 @@
#include <linux/spinlock.h>
#include <linux/vt_kern.h>
#include <linux/workqueue.h>
-#include <linux/kexec.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
@@ -124,9 +123,12 @@
static void sysrq_handle_crash(int key, struct tty_struct *tty)
{
char *killer = NULL;
+
+ panic_on_oops = 1; /* force panic */
+ wmb();
*killer = 1;
}
-static struct sysrq_key_op sysrq_crashdump_op = {
+static struct sysrq_key_op sysrq_crash_op = {
.handler = sysrq_handle_crash,
.help_msg = "Crash",
.action_msg = "Trigger a crash",
@@ -401,7 +403,7 @@
*/
NULL, /* a */
&sysrq_reboot_op, /* b */
- &sysrq_crashdump_op, /* c & ibm_emac driver debug */
+ &sysrq_crash_op, /* c & ibm_emac driver debug */
&sysrq_showlocks_op, /* d */
&sysrq_term_op, /* e */
&sysrq_moom_op, /* f */
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index 6062b62..b3ec9b1 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -1,7 +1,7 @@
/*
* Driver for TANBAC TB0219 base board.
*
- * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@
#include <asm/vr41xx/giu.h>
#include <asm/vr41xx/tb0219.h>
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("TANBAC TB0219 base board driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index ccdd828..b0603b2 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -26,7 +26,6 @@
#include <linux/poll.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <linux/smp_lock.h>
#include "tpm.h"
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 810ee25..3108991 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -462,6 +462,19 @@
}
/**
+ * tty_flush_to_ldisc
+ * @tty: tty to push
+ *
+ * Push the terminal flip buffers to the line discipline.
+ *
+ * Must not be called from IRQ context.
+ */
+void tty_flush_to_ldisc(struct tty_struct *tty)
+{
+ flush_to_ldisc(&tty->buf.work.work);
+}
+
+/**
* tty_flip_buffer_push - terminal
* @tty: tty to push
*
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index b24f6c6..ad6ba4e 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
-#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index a19e935..1733d34 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -21,7 +21,6 @@
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/bitops.h>
@@ -49,6 +48,41 @@
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
+static inline struct tty_ldisc *get_ldisc(struct tty_ldisc *ld)
+{
+ if (ld)
+ atomic_inc(&ld->users);
+ return ld;
+}
+
+static void put_ldisc(struct tty_ldisc *ld)
+{
+ unsigned long flags;
+
+ if (WARN_ON_ONCE(!ld))
+ return;
+
+ /*
+ * If this is the last user, free the ldisc, and
+ * release the ldisc ops.
+ *
+ * We really want an "atomic_dec_and_lock_irqsave()",
+ * but we don't have it, so this does it by hand.
+ */
+ local_irq_save(flags);
+ if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) {
+ struct tty_ldisc_ops *ldo = ld->ops;
+
+ ldo->refcount--;
+ module_put(ldo->owner);
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+ kfree(ld);
+ return;
+ }
+ local_irq_restore(flags);
+}
+
/**
* tty_register_ldisc - install a line discipline
* @disc: ldisc number
@@ -143,7 +177,7 @@
/* lock it */
ldops->refcount++;
ld->ops = ldops;
- ld->refcount = 0;
+ atomic_set(&ld->users, 1);
err = 0;
}
}
@@ -182,35 +216,6 @@
return ld;
}
-/**
- * tty_ldisc_put - drop ldisc reference
- * @ld: ldisc
- *
- * Drop a reference to a line discipline. Manage refcounts and
- * module usage counts. Free the ldisc once the recount hits zero.
- *
- * Locking:
- * takes tty_ldisc_lock to guard against ldisc races
- */
-
-static void tty_ldisc_put(struct tty_ldisc *ld)
-{
- unsigned long flags;
- int disc = ld->ops->num;
- struct tty_ldisc_ops *ldo;
-
- BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- ldo = tty_ldiscs[disc];
- BUG_ON(ldo->refcount == 0);
- ldo->refcount--;
- module_put(ldo->owner);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- WARN_ON(ld->refcount);
- kfree(ld);
-}
-
static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
{
return (*pos < NR_LDISCS) ? pos : NULL;
@@ -235,7 +240,7 @@
if (IS_ERR(ld))
return 0;
seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
- tty_ldisc_put(ld);
+ put_ldisc(ld);
return 0;
}
@@ -289,20 +294,17 @@
* Locking: takes tty_ldisc_lock
*/
-static int tty_ldisc_try(struct tty_struct *tty)
+static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
{
unsigned long flags;
struct tty_ldisc *ld;
- int ret = 0;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld = tty->ldisc;
- if (test_bit(TTY_LDISC, &tty->flags)) {
- ld->refcount++;
- ret = 1;
- }
+ ld = NULL;
+ if (test_bit(TTY_LDISC, &tty->flags))
+ ld = get_ldisc(tty->ldisc);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return ret;
+ return ld;
}
/**
@@ -323,10 +325,11 @@
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
+ struct tty_ldisc *ld;
+
/* wait_event is a macro */
- wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
- WARN_ON(tty->ldisc->refcount == 0);
- return tty->ldisc;
+ wait_event(tty_ldisc_wait, (ld = tty_ldisc_try(tty)) != NULL);
+ return ld;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
@@ -343,9 +346,7 @@
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
- if (tty_ldisc_try(tty))
- return tty->ldisc;
- return NULL;
+ return tty_ldisc_try(tty);
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
@@ -361,21 +362,15 @@
void tty_ldisc_deref(struct tty_ldisc *ld)
{
- unsigned long flags;
-
- BUG_ON(ld == NULL);
-
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- if (ld->refcount == 0)
- printk(KERN_ERR "tty_ldisc_deref: no references.\n");
- else
- ld->refcount--;
- if (ld->refcount == 0)
- wake_up(&tty_ldisc_wait);
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ put_ldisc(ld);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
+static inline void tty_ldisc_put(struct tty_ldisc *ld)
+{
+ put_ldisc(ld);
+}
+
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
@@ -524,31 +519,6 @@
}
/**
- * tty_ldisc_wait_idle - wait for the ldisc to become idle
- * @tty: tty to wait for
- *
- * Wait for the line discipline to become idle. The discipline must
- * have been halted for this to guarantee it remains idle.
- *
- * tty_ldisc_lock protects the ref counts currently.
- */
-
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- while (tty->ldisc->refcount) {
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- if (wait_event_timeout(tty_ldisc_wait,
- tty->ldisc->refcount == 0, 5 * HZ) == 0)
- return -EBUSY;
- spin_lock_irqsave(&tty_ldisc_lock, flags);
- }
- spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- return 0;
-}
-
-/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
@@ -643,14 +613,6 @@
flush_scheduled_work();
- /* Let any existing reference holders finish */
- retval = tty_ldisc_wait_idle(tty);
- if (retval < 0) {
- clear_bit(TTY_LDISC_CHANGING, &tty->flags);
- tty_ldisc_put(new_ldisc);
- return retval;
- }
-
mutex_lock(&tty->ldisc_mutex);
if (test_bit(TTY_HUPPED, &tty->flags)) {
/* We were raced by the hangup method. It will have stomped
@@ -791,17 +753,19 @@
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* Avoid racing set_ldisc */
+ /* Avoid racing set_ldisc or tty_ldisc_release */
mutex_lock(&tty->ldisc_mutex);
- /* Switch back to N_TTY */
- tty_ldisc_halt(tty);
- tty_ldisc_wait_idle(tty);
- tty_ldisc_reinit(tty);
- /* At this point we have a closed ldisc and we want to
- reopen it. We could defer this to the next open but
- it means auditing a lot of other paths so this is a FIXME */
- WARN_ON(tty_ldisc_open(tty, tty->ldisc));
- tty_ldisc_enable(tty);
+ if (tty->ldisc) { /* Not yet closed */
+ /* Switch back to N_TTY */
+ tty_ldisc_halt(tty);
+ tty_ldisc_reinit(tty);
+ /* At this point we have a closed ldisc and we want to
+ reopen it. We could defer this to the next open but
+ it means auditing a lot of other paths so this is
+ a FIXME */
+ WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+ tty_ldisc_enable(tty);
+ }
mutex_unlock(&tty->ldisc_mutex);
tty_reset_termios(tty);
}
@@ -858,24 +822,25 @@
tty_ldisc_halt(tty);
flush_scheduled_work();
+ mutex_lock(&tty->ldisc_mutex);
/*
- * Wait for any short term users (we know they are just driver
- * side waiters as the file is closing so user count on the file
- * side is zero.
+ * Now kill off the ldisc
*/
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ /* Force an oops if we mess this up */
+ tty->ldisc = NULL;
- tty_ldisc_wait_idle(tty);
+ /* Ensure the next open requests the N_TTY ldisc */
+ tty_set_termios_ldisc(tty, N_TTY);
+ mutex_unlock(&tty->ldisc_mutex);
- /*
- * Shutdown the current line discipline, and reset it to N_TTY.
- *
- * FIXME: this MUST get fixed for the new reflocking
- */
-
- tty_ldisc_reinit(tty);
/* This will need doing differently if we need to lock */
if (o_tty)
tty_ldisc_release(o_tty, NULL);
+
+ /* And the memory resources remaining (buffers, termios) will be
+ disposed of when the kref hits zero */
}
/**
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 4e862a7..9769b11 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -267,7 +267,7 @@
if (retval == 0)
port->flags |= ASYNC_NORMAL_ACTIVE;
spin_unlock_irqrestore(&port->lock, flags);
- return 0;
+ return retval;
}
EXPORT_SYMBOL(tty_port_block_til_ready);
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index d94d25c..c1791a6 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -495,11 +495,15 @@
int __init vcs_init(void)
{
+ unsigned int i;
+
if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops))
panic("unable to get major %d for vcs device", VCS_MAJOR);
vc_class = class_create(THIS_MODULE, "vc");
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+ for (i = 0; i < MIN_NR_CONSOLES; i++)
+ vcs_make_sysfs(i);
return 0;
}
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index d9113b4..404f4c1 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -89,6 +89,7 @@
#include <linux/mutex.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
+#include <linux/smp_lock.h>
#include <linux/tiocl.h>
#include <linux/kbd_kern.h>
#include <linux/consolemap.h>
@@ -769,14 +770,12 @@
visual_init(vc, currcons, 1);
if (!*vc->vc_uni_pagedir_loc)
con_set_default_unimap(vc);
- if (!vc->vc_kmalloced)
- vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
+ vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf) {
kfree(vc);
vc_cons[currcons].d = NULL;
return -ENOMEM;
}
- vc->vc_kmalloced = 1;
vc_init(vc, vc->vc_rows, vc->vc_cols, 1);
vcs_make_sysfs(currcons);
atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, ¶m);
@@ -912,10 +911,8 @@
if (new_scr_end > new_origin)
scr_memsetw((void *)new_origin, vc->vc_video_erase_char,
new_scr_end - new_origin);
- if (vc->vc_kmalloced)
- kfree(vc->vc_screenbuf);
+ kfree(vc->vc_screenbuf);
vc->vc_screenbuf = newscreen;
- vc->vc_kmalloced = 1;
vc->vc_screenbuf_size = new_screen_size;
set_origin(vc);
@@ -994,8 +991,7 @@
vc->vc_sw->con_deinit(vc);
put_pid(vc->vt_pid);
module_put(vc->vc_sw->owner);
- if (vc->vc_kmalloced)
- kfree(vc->vc_screenbuf);
+ kfree(vc->vc_screenbuf);
if (currcons >= MIN_NR_CONSOLES)
kfree(vc);
vc_cons[currcons].d = NULL;
@@ -2880,7 +2876,6 @@
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
- vc->vc_kmalloced = 0;
vc_init(vc, vc->vc_rows, vc->vc_cols,
currcons || !vc->vc_sw->con_save_screen);
}
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 7539bed..95189f2 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -25,6 +25,7 @@
#include <linux/console.h>
#include <linux/consolemap.h>
#include <linux/signal.h>
+#include <linux/smp_lock.h>
#include <linux/timex.h>
#include <asm/io.h>
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 9ffb05f..93c2322 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -161,7 +161,7 @@
if (periodic)
sh_tmu_write(p, TCOR, delta);
else
- sh_tmu_write(p, TCOR, 0);
+ sh_tmu_write(p, TCOR, 0xffffffff);
sh_tmu_write(p, TCNT, delta);
diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index c769ef2..408c2af 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -1,7 +1,7 @@
/*
* cn_queue.c
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index fd336c5..08b2500 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -1,7 +1,7 @@
/*
* connector.c
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
@@ -33,7 +33,7 @@
#include <net/sock.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
static u32 cn_idx = CN_IDX_CONNECTOR;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 6e2ec0b..fd69086 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -761,6 +761,10 @@
* cpufreq_add_dev - add a CPU device
*
* Adds the cpufreq interface for a CPU device.
+ *
+ * The Oracle says: try running cpufreq registration/unregistration concurrently
+ * with with cpu hotplugging and all hell will break loose. Tried to clean this
+ * mess up, but more thorough testing is needed. - Mathieu
*/
static int cpufreq_add_dev(struct sys_device *sys_dev)
{
@@ -772,9 +776,6 @@
struct sys_device *cpu_sys_dev;
unsigned long flags;
unsigned int j;
-#ifdef CONFIG_SMP
- struct cpufreq_policy *managed_policy;
-#endif
if (cpu_is_offline(cpu))
return 0;
@@ -804,15 +805,12 @@
goto nomem_out;
}
if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) {
- kfree(policy);
ret = -ENOMEM;
- goto nomem_out;
+ goto err_free_policy;
}
if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
- free_cpumask_var(policy->cpus);
- kfree(policy);
ret = -ENOMEM;
- goto nomem_out;
+ goto err_free_cpumask;
}
policy->cpu = cpu;
@@ -820,7 +818,8 @@
/* Initially set CPU itself as the policy_cpu */
per_cpu(policy_cpu, cpu) = cpu;
- lock_policy_rwsem_write(cpu);
+ ret = (lock_policy_rwsem_write(cpu) < 0);
+ WARN_ON(ret);
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update);
@@ -833,7 +832,7 @@
ret = cpufreq_driver->init(policy);
if (ret) {
dprintk("initialization failed\n");
- goto err_out;
+ goto err_unlock_policy;
}
policy->user_policy.min = policy->min;
policy->user_policy.max = policy->max;
@@ -852,21 +851,31 @@
#endif
for_each_cpu(j, policy->cpus) {
+ struct cpufreq_policy *managed_policy;
+
if (cpu == j)
continue;
/* Check for existing affected CPUs.
* They may not be aware of it due to CPU Hotplug.
+ * cpufreq_cpu_put is called when the device is removed
+ * in __cpufreq_remove_dev()
*/
- managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */
+ managed_policy = cpufreq_cpu_get(j);
if (unlikely(managed_policy)) {
/* Set proper policy_cpu */
unlock_policy_rwsem_write(cpu);
per_cpu(policy_cpu, cpu) = managed_policy->cpu;
- if (lock_policy_rwsem_write(cpu) < 0)
- goto err_out_driver_exit;
+ if (lock_policy_rwsem_write(cpu) < 0) {
+ /* Should not go through policy unlock path */
+ if (cpufreq_driver->exit)
+ cpufreq_driver->exit(policy);
+ ret = -EBUSY;
+ cpufreq_cpu_put(managed_policy);
+ goto err_free_cpumask;
+ }
spin_lock_irqsave(&cpufreq_driver_lock, flags);
cpumask_copy(managed_policy->cpus, policy->cpus);
@@ -878,11 +887,13 @@
&managed_policy->kobj,
"cpufreq");
if (ret)
- goto err_out_driver_exit;
-
- cpufreq_debug_enable_ratelimit();
- ret = 0;
- goto err_out_driver_exit; /* call driver->exit() */
+ cpufreq_cpu_put(managed_policy);
+ /*
+ * Success. We only needed to be added to the mask.
+ * Call driver->exit() because only the cpu parent of
+ * the kobj needed to call init().
+ */
+ goto out_driver_exit; /* call driver->exit() */
}
}
#endif
@@ -892,29 +903,31 @@
ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
"cpufreq");
if (ret)
- goto err_out_driver_exit;
+ goto out_driver_exit;
/* set up files for this cpu device */
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
- goto err_out_driver_exit;
+ goto err_out_kobj_put;
drv_attr++;
}
if (cpufreq_driver->get) {
ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
if (ret)
- goto err_out_driver_exit;
+ goto err_out_kobj_put;
}
if (cpufreq_driver->target) {
ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
- goto err_out_driver_exit;
+ goto err_out_kobj_put;
}
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus) {
+ if (!cpu_online(j))
+ continue;
per_cpu(cpufreq_cpu_data, j) = policy;
per_cpu(policy_cpu, j) = policy->cpu;
}
@@ -922,18 +935,22 @@
/* symlink affected CPUs */
for_each_cpu(j, policy->cpus) {
+ struct cpufreq_policy *managed_policy;
+
if (j == cpu)
continue;
if (!cpu_online(j))
continue;
dprintk("CPU %u already managed, adding link\n", j);
- cpufreq_cpu_get(cpu);
+ managed_policy = cpufreq_cpu_get(cpu);
cpu_sys_dev = get_cpu_sysdev(j);
ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
"cpufreq");
- if (ret)
+ if (ret) {
+ cpufreq_cpu_put(managed_policy);
goto err_out_unregister;
+ }
}
policy->governor = NULL; /* to assure that the starting sequence is
@@ -965,17 +982,20 @@
per_cpu(cpufreq_cpu_data, j) = NULL;
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
+err_out_kobj_put:
kobject_put(&policy->kobj);
wait_for_completion(&policy->kobj_unregister);
-err_out_driver_exit:
+out_driver_exit:
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
-err_out:
+err_unlock_policy:
unlock_policy_rwsem_write(cpu);
+err_free_cpumask:
+ free_cpumask_var(policy->cpus);
+err_free_policy:
kfree(policy);
-
nomem_out:
module_put(cpufreq_driver->owner);
module_out:
@@ -1070,8 +1090,6 @@
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
- unlock_policy_rwsem_write(cpu);
-
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
@@ -1088,6 +1106,8 @@
if (cpufreq_driver->exit)
cpufreq_driver->exit(data);
+ unlock_policy_rwsem_write(cpu);
+
free_cpumask_var(data->related_cpus);
free_cpumask_var(data->cpus);
kfree(data);
@@ -1228,13 +1248,22 @@
static int cpufreq_suspend(struct sys_device *sysdev, pm_message_t pmsg)
{
- int cpu = sysdev->id;
int ret = 0;
+
+#ifdef __powerpc__
+ int cpu = sysdev->id;
unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
+ /*
+ * This whole bogosity is here because Powerbooks are made of fail.
+ * No sane platform should need any of the code below to be run.
+ * (it's entirely the wrong thing to do, as driver->get may
+ * reenable interrupts on some architectures).
+ */
+
if (!cpu_online(cpu))
return 0;
@@ -1293,6 +1322,7 @@
out:
cpufreq_cpu_put(cpu_policy);
+#endif /* __powerpc__ */
return ret;
}
@@ -1306,12 +1336,18 @@
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
- int cpu = sysdev->id;
int ret = 0;
+
+#ifdef __powerpc__
+ int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
+ /* As with the ->suspend method, all the code below is
+ * only necessary because Powerbooks suck.
+ * See commit 42d4dc3f4e1e for jokes. */
+
if (!cpu_online(cpu))
return 0;
@@ -1375,6 +1411,7 @@
schedule_work(&cpu_policy->update);
fail:
cpufreq_cpu_put(cpu_policy);
+#endif /* __powerpc__ */
return ret;
}
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 7fc58af..bdea7e2 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -64,21 +64,20 @@
unsigned int requested_freq;
int cpu;
unsigned int enable:1;
+ /*
+ * percpu mutex that serializes governor limit change with
+ * do_dbs_timer invocation. We do not want do_dbs_timer to run
+ * when user is changing the governor or limits.
+ */
+ struct mutex timer_mutex;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
static unsigned int dbs_enable; /* number of CPUs using this policy */
/*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
*/
static DEFINE_MUTEX(dbs_mutex);
@@ -488,18 +487,12 @@
delay -= jiffies % delay;
- if (lock_policy_rwsem_write(cpu) < 0)
- return;
-
- if (!dbs_info->enable) {
- unlock_policy_rwsem_write(cpu);
- return;
- }
+ mutex_lock(&dbs_info->timer_mutex);
dbs_check_cpu(dbs_info);
queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay);
- unlock_policy_rwsem_write(cpu);
+ mutex_unlock(&dbs_info->timer_mutex);
}
static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -535,9 +528,6 @@
if ((!cpu_online(cpu)) || (!policy->cur))
return -EINVAL;
- if (this_dbs_info->enable) /* Already enabled */
- break;
-
mutex_lock(&dbs_mutex);
rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
@@ -561,6 +551,7 @@
this_dbs_info->down_skip = 0;
this_dbs_info->requested_freq = policy->cur;
+ mutex_init(&this_dbs_info->timer_mutex);
dbs_enable++;
/*
* Start the timerschedule work, when this governor
@@ -590,17 +581,19 @@
&dbs_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
}
- dbs_timer_init(this_dbs_info);
-
mutex_unlock(&dbs_mutex);
+ dbs_timer_init(this_dbs_info);
+
break;
case CPUFREQ_GOV_STOP:
- mutex_lock(&dbs_mutex);
dbs_timer_exit(this_dbs_info);
+
+ mutex_lock(&dbs_mutex);
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
+ mutex_destroy(&this_dbs_info->timer_mutex);
/*
* Stop the timerschedule work, when this governor
@@ -616,7 +609,7 @@
break;
case CPUFREQ_GOV_LIMITS:
- mutex_lock(&dbs_mutex);
+ mutex_lock(&this_dbs_info->timer_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(
this_dbs_info->cur_policy,
@@ -625,7 +618,7 @@
__cpufreq_driver_target(
this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- mutex_unlock(&dbs_mutex);
+ mutex_unlock(&this_dbs_info->timer_mutex);
break;
}
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 1911d17..d6ba142 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -70,23 +70,21 @@
unsigned int freq_lo_jiffies;
unsigned int freq_hi_jiffies;
int cpu;
- unsigned int enable:1,
- sample_type:1;
+ unsigned int sample_type:1;
+ /*
+ * percpu mutex that serializes governor limit change with
+ * do_dbs_timer invocation. We do not want do_dbs_timer to run
+ * when user is changing the governor or limits.
+ */
+ struct mutex timer_mutex;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
static unsigned int dbs_enable; /* number of CPUs using this policy */
/*
- * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug
- * lock and dbs_mutex. cpu_hotplug lock should always be held before
- * dbs_mutex. If any function that can potentially take cpu_hotplug lock
- * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
- * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
- * is recursive for the same process. -Venki
- * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
- * would deadlock with cancel_delayed_work_sync(), which is needed for proper
- * raceless workqueue teardown.
+ * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on
+ * different CPUs. It protects dbs_enable in governor start/stop.
*/
static DEFINE_MUTEX(dbs_mutex);
@@ -192,13 +190,18 @@
return freq_hi;
}
+static void ondemand_powersave_bias_init_cpu(int cpu)
+{
+ struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
+ dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+ dbs_info->freq_lo = 0;
+}
+
static void ondemand_powersave_bias_init(void)
{
int i;
for_each_online_cpu(i) {
- struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i);
- dbs_info->freq_table = cpufreq_frequency_get_table(i);
- dbs_info->freq_lo = 0;
+ ondemand_powersave_bias_init_cpu(i);
}
}
@@ -240,12 +243,10 @@
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
+ if (ret != 1)
+ return -EINVAL;
mutex_lock(&dbs_mutex);
- if (ret != 1) {
- mutex_unlock(&dbs_mutex);
- return -EINVAL;
- }
dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
mutex_unlock(&dbs_mutex);
@@ -259,13 +260,12 @@
int ret;
ret = sscanf(buf, "%u", &input);
- mutex_lock(&dbs_mutex);
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
input < MIN_FREQUENCY_UP_THRESHOLD) {
- mutex_unlock(&dbs_mutex);
return -EINVAL;
}
+ mutex_lock(&dbs_mutex);
dbs_tuners_ins.up_threshold = input;
mutex_unlock(&dbs_mutex);
@@ -363,9 +363,6 @@
struct cpufreq_policy *policy;
unsigned int j;
- if (!this_dbs_info->enable)
- return;
-
this_dbs_info->freq_lo = 0;
policy = this_dbs_info->cur_policy;
@@ -493,14 +490,7 @@
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
-
- if (lock_policy_rwsem_write(cpu) < 0)
- return;
-
- if (!dbs_info->enable) {
- unlock_policy_rwsem_write(cpu);
- return;
- }
+ mutex_lock(&dbs_info->timer_mutex);
/* Common NORMAL_SAMPLE setup */
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
@@ -517,7 +507,7 @@
dbs_info->freq_lo, CPUFREQ_RELATION_H);
}
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
- unlock_policy_rwsem_write(cpu);
+ mutex_unlock(&dbs_info->timer_mutex);
}
static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
@@ -526,8 +516,6 @@
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
- dbs_info->enable = 1;
- ondemand_powersave_bias_init();
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer);
queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work,
@@ -536,7 +524,6 @@
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
- dbs_info->enable = 0;
cancel_delayed_work_sync(&dbs_info->work);
}
@@ -555,19 +542,15 @@
if ((!cpu_online(cpu)) || (!policy->cur))
return -EINVAL;
- if (this_dbs_info->enable) /* Already enabled */
- break;
-
mutex_lock(&dbs_mutex);
- dbs_enable++;
rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
if (rc) {
- dbs_enable--;
mutex_unlock(&dbs_mutex);
return rc;
}
+ dbs_enable++;
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
@@ -581,6 +564,8 @@
}
}
this_dbs_info->cpu = cpu;
+ ondemand_powersave_bias_init_cpu(cpu);
+ mutex_init(&this_dbs_info->timer_mutex);
/*
* Start the timerschedule work, when this governor
* is used for first time
@@ -598,29 +583,31 @@
max(min_sampling_rate,
latency * LATENCY_MULTIPLIER);
}
- dbs_timer_init(this_dbs_info);
-
mutex_unlock(&dbs_mutex);
+
+ dbs_timer_init(this_dbs_info);
break;
case CPUFREQ_GOV_STOP:
- mutex_lock(&dbs_mutex);
dbs_timer_exit(this_dbs_info);
+
+ mutex_lock(&dbs_mutex);
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
+ mutex_destroy(&this_dbs_info->timer_mutex);
dbs_enable--;
mutex_unlock(&dbs_mutex);
break;
case CPUFREQ_GOV_LIMITS:
- mutex_lock(&dbs_mutex);
+ mutex_lock(&this_dbs_info->timer_mutex);
if (policy->max < this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(this_dbs_info->cur_policy,
policy->max, CPUFREQ_RELATION_H);
else if (policy->min > this_dbs_info->cur_policy->cur)
__cpufreq_driver_target(this_dbs_info->cur_policy,
policy->min, CPUFREQ_RELATION_L);
- mutex_unlock(&dbs_mutex);
+ mutex_unlock(&this_dbs_info->timer_mutex);
break;
}
return 0;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 070357a..81e1020 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,7 +4,7 @@
menuconfig DMADEVICES
bool "DMA Engine support"
- depends on !HIGHMEM64G && HAS_DMA
+ depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
@@ -46,6 +46,14 @@
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config AT_HDMAC
+ tristate "Atmel AHB DMA support"
+ depends on ARCH_AT91SAM9RL
+ select DMA_ENGINE
+ help
+ Support the Atmel AHB DMA controller. This can be integrated in
+ chips such as the Atmel AT91SAM9RL.
+
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
@@ -108,7 +116,7 @@
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
- depends on DMA_ENGINE
+ depends on DMA_ENGINE && !HIGHMEM64G
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a0b6564..40e1e00 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,5 +7,6 @@
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
new file mode 100644
index 0000000..9a1e5fb
--- /dev/null
+++ b/drivers/dma/at_hdmac.c
@@ -0,0 +1,1213 @@
+/*
+ * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * This supports the Atmel AHB DMA Controller,
+ *
+ * The driver has currently been tested with the Atmel AT91SAM9RL
+ * and AT91SAM9G45 series.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "at_hdmac_regs.h"
+
+/*
+ * Glossary
+ * --------
+ *
+ * at_hdmac : Name of the ATmel AHB DMA Controller
+ * at_dma_ / atdma : ATmel DMA controller entity related
+ * atc_ / atchan : ATmel DMA Channel entity related
+ */
+
+#define ATC_DEFAULT_CFG (ATC_FIFOCFG_HALFFIFO)
+#define ATC_DEFAULT_CTRLA (0)
+#define ATC_DEFAULT_CTRLB (ATC_SIF(0) \
+ |ATC_DIF(1))
+
+/*
+ * Initial number of descriptors to allocate for each channel. This could
+ * be increased during dma usage.
+ */
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+ "initial descriptors per channel (default: 64)");
+
+
+/* prototypes */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
+
+
+/*----------------------------------------------------------------------*/
+
+static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
+{
+ return list_first_entry(&atchan->active_list,
+ struct at_desc, desc_node);
+}
+
+static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
+{
+ return list_first_entry(&atchan->queue,
+ struct at_desc, desc_node);
+}
+
+/**
+ * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * @chan: the channel to allocate descriptors for
+ * @gfp_flags: GFP allocation flags
+ *
+ * Note: The ack-bit is positioned in the descriptor flag at creation time
+ * to make initial allocation more convenient. This bit will be cleared
+ * and control will be given to client at usage time (during
+ * preparation functions).
+ */
+static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
+ gfp_t gfp_flags)
+{
+ struct at_desc *desc = NULL;
+ struct at_dma *atdma = to_at_dma(chan->device);
+ dma_addr_t phys;
+
+ desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
+ if (desc) {
+ memset(desc, 0, sizeof(struct at_desc));
+ dma_async_tx_descriptor_init(&desc->txd, chan);
+ /* txd.flags will be overwritten in prep functions */
+ desc->txd.flags = DMA_CTRL_ACK;
+ desc->txd.tx_submit = atc_tx_submit;
+ desc->txd.phys = phys;
+ }
+
+ return desc;
+}
+
+/**
+ * atc_desc_get - get a unsused descriptor from free_list
+ * @atchan: channel we want a new descriptor for
+ */
+static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ struct at_desc *ret = NULL;
+ unsigned int i = 0;
+ LIST_HEAD(tmp_list);
+
+ spin_lock_bh(&atchan->lock);
+ list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+ i++;
+ if (async_tx_test_ack(&desc->txd)) {
+ list_del(&desc->desc_node);
+ ret = desc;
+ break;
+ }
+ dev_dbg(chan2dev(&atchan->chan_common),
+ "desc %p not ACKed\n", desc);
+ }
+ spin_unlock_bh(&atchan->lock);
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "scanned %u descriptors on freelist\n", i);
+
+ /* no more descriptor available in initial pool: create one more */
+ if (!ret) {
+ ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
+ if (ret) {
+ spin_lock_bh(&atchan->lock);
+ atchan->descs_allocated++;
+ spin_unlock_bh(&atchan->lock);
+ } else {
+ dev_err(chan2dev(&atchan->chan_common),
+ "not enough descriptors available\n");
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * atc_desc_put - move a descriptor, including any children, to the free list
+ * @atchan: channel we work on
+ * @desc: descriptor, at the head of a chain, to move to free list
+ */
+static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ if (desc) {
+ struct at_desc *child;
+
+ spin_lock_bh(&atchan->lock);
+ list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "moving child desc %p to freelist\n",
+ child);
+ list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "moving desc %p to freelist\n", desc);
+ list_add(&desc->desc_node, &atchan->free_list);
+ spin_unlock_bh(&atchan->lock);
+ }
+}
+
+/**
+ * atc_assign_cookie - compute and assign new cookie
+ * @atchan: channel we work on
+ * @desc: descriptor to asign cookie for
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static dma_cookie_t
+atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ dma_cookie_t cookie = atchan->chan_common.cookie;
+
+ if (++cookie < 0)
+ cookie = 1;
+
+ atchan->chan_common.cookie = cookie;
+ desc->txd.cookie = cookie;
+
+ return cookie;
+}
+
+/**
+ * atc_dostart - starts the DMA engine for real
+ * @atchan: the channel we want to start
+ * @first: first descriptor in the list we want to begin with
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ /* ASSERT: channel is idle */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(&atchan->chan_common),
+ "BUG: Attempted to start non-idle channel\n");
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+ channel_readl(atchan, SADDR),
+ channel_readl(atchan, DADDR),
+ channel_readl(atchan, CTRLA),
+ channel_readl(atchan, CTRLB),
+ channel_readl(atchan, DSCR));
+
+ /* The tasklet will hopefully advance the queue... */
+ return;
+ }
+
+ vdbg_dump_regs(atchan);
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ channel_writel(atchan, SADDR, 0);
+ channel_writel(atchan, DADDR, 0);
+ channel_writel(atchan, CTRLA, 0);
+ channel_writel(atchan, CTRLB, 0);
+ channel_writel(atchan, DSCR, first->txd.phys);
+ dma_writel(atdma, CHER, atchan->mask);
+
+ vdbg_dump_regs(atchan);
+}
+
+/**
+ * atc_chain_complete - finish work for one transaction chain
+ * @atchan: channel we work on
+ * @desc: descriptor at the head of the chain we want do complete
+ *
+ * Called with atchan->lock held and bh disabled */
+static void
+atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+ dma_async_tx_callback callback;
+ void *param;
+ struct dma_async_tx_descriptor *txd = &desc->txd;
+
+ dev_vdbg(chan2dev(&atchan->chan_common),
+ "descriptor %u complete\n", txd->cookie);
+
+ atchan->completed_cookie = txd->cookie;
+ callback = txd->callback;
+ param = txd->callback_param;
+
+ /* move children to free_list */
+ list_splice_init(&txd->tx_list, &atchan->free_list);
+ /* move myself to free_list */
+ list_move(&desc->desc_node, &atchan->free_list);
+
+ /* unmap dma addresses */
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&atchan->chan_common),
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&atchan->chan_common),
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&atchan->chan_common),
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&atchan->chan_common),
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ }
+
+ /*
+ * The API requires that no submissions are done from a
+ * callback, so we don't need to drop the lock here
+ */
+ if (callback)
+ callback(param);
+
+ dma_run_dependencies(txd);
+}
+
+/**
+ * atc_complete_all - finish work for all transactions
+ * @atchan: channel to complete transactions for
+ *
+ * Eventually submit queued descriptors if any
+ *
+ * Assume channel is idle while calling this function
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_complete_all(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
+
+ BUG_ON(atc_chan_is_enabled(atchan));
+
+ /*
+ * Submit queued descriptors ASAP, i.e. before we go through
+ * the completed ones.
+ */
+ if (!list_empty(&atchan->queue))
+ atc_dostart(atchan, atc_first_queued(atchan));
+ /* empty active_list now it is completed */
+ list_splice_init(&atchan->active_list, &list);
+ /* empty queue list by moving descriptors (if any) to active_list */
+ list_splice_init(&atchan->queue, &atchan->active_list);
+
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_cleanup_descriptors - cleanup up finished descriptors in active_list
+ * @atchan: channel to be cleaned up
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_cleanup_descriptors(struct at_dma_chan *atchan)
+{
+ struct at_desc *desc, *_desc;
+ struct at_desc *child;
+
+ dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n");
+
+ list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
+ if (!(desc->lli.ctrla & ATC_DONE))
+ /* This one is currently in progress */
+ return;
+
+ list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ if (!(child->lli.ctrla & ATC_DONE))
+ /* Currently in progress */
+ return;
+
+ /*
+ * No descriptors so far seem to be in progress, i.e.
+ * this chain must be done.
+ */
+ atc_chain_complete(atchan, desc);
+ }
+}
+
+/**
+ * atc_advance_work - at the end of a transaction, move forward
+ * @atchan: channel where the transaction ended
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_advance_work(struct at_dma_chan *atchan)
+{
+ dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
+
+ if (list_empty(&atchan->active_list) ||
+ list_is_singular(&atchan->active_list)) {
+ atc_complete_all(atchan);
+ } else {
+ atc_chain_complete(atchan, atc_first_active(atchan));
+ /* advance work */
+ atc_dostart(atchan, atc_first_active(atchan));
+ }
+}
+
+
+/**
+ * atc_handle_error - handle errors reported by DMA controller
+ * @atchan: channel where error occurs
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_handle_error(struct at_dma_chan *atchan)
+{
+ struct at_desc *bad_desc;
+ struct at_desc *child;
+
+ /*
+ * The descriptor currently at the head of the active list is
+ * broked. Since we don't have any way to report errors, we'll
+ * just have to scream loudly and try to carry on.
+ */
+ bad_desc = atc_first_active(atchan);
+ list_del_init(&bad_desc->desc_node);
+
+ /* As we are stopped, take advantage to push queued descriptors
+ * in active_list */
+ list_splice_init(&atchan->queue, atchan->active_list.prev);
+
+ /* Try to restart the controller */
+ if (!list_empty(&atchan->active_list))
+ atc_dostart(atchan, atc_first_active(atchan));
+
+ /*
+ * KERN_CRITICAL may seem harsh, but since this only happens
+ * when someone submits a bad physical address in a
+ * descriptor, we should consider ourselves lucky that the
+ * controller flagged an error instead of scribbling over
+ * random memory locations.
+ */
+ dev_crit(chan2dev(&atchan->chan_common),
+ "Bad descriptor submitted for DMA!\n");
+ dev_crit(chan2dev(&atchan->chan_common),
+ " cookie: %d\n", bad_desc->txd.cookie);
+ atc_dump_lli(atchan, &bad_desc->lli);
+ list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ atc_dump_lli(atchan, &child->lli);
+
+ /* Pretend the descriptor completed successfully */
+ atc_chain_complete(atchan, bad_desc);
+}
+
+
+/*-- IRQ & Tasklet ---------------------------------------------------*/
+
+static void atc_tasklet(unsigned long data)
+{
+ struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+
+ /* Channel cannot be enabled here */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_err(chan2dev(&atchan->chan_common),
+ "BUG: channel enabled in tasklet\n");
+ return;
+ }
+
+ spin_lock(&atchan->lock);
+ if (test_and_clear_bit(0, &atchan->error_status))
+ atc_handle_error(atchan);
+ else
+ atc_advance_work(atchan);
+
+ spin_unlock(&atchan->lock);
+}
+
+static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
+{
+ struct at_dma *atdma = (struct at_dma *)dev_id;
+ struct at_dma_chan *atchan;
+ int i;
+ u32 status, pending, imr;
+ int ret = IRQ_NONE;
+
+ do {
+ imr = dma_readl(atdma, EBCIMR);
+ status = dma_readl(atdma, EBCISR);
+ pending = status & imr;
+
+ if (!pending)
+ break;
+
+ dev_vdbg(atdma->dma_common.dev,
+ "interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
+ status, imr, pending);
+
+ for (i = 0; i < atdma->dma_common.chancnt; i++) {
+ atchan = &atdma->chan[i];
+ if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+ if (pending & AT_DMA_ERR(i)) {
+ /* Disable channel on AHB error */
+ dma_writel(atdma, CHDR, atchan->mask);
+ /* Give information to tasklet */
+ set_bit(0, &atchan->error_status);
+ }
+ tasklet_schedule(&atchan->tasklet);
+ ret = IRQ_HANDLED;
+ }
+ }
+
+ } while (pending);
+
+ return ret;
+}
+
+
+/*-- DMA Engine API --------------------------------------------------*/
+
+/**
+ * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
+ * @desc: descriptor at the head of the transaction chain
+ *
+ * Queue chain if DMA engine is working already
+ *
+ * Cookie increment and adding to active_list or queue must be atomic
+ */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct at_desc *desc = txd_to_at_desc(tx);
+ struct at_dma_chan *atchan = to_at_dma_chan(tx->chan);
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&atchan->lock);
+ cookie = atc_assign_cookie(atchan, desc);
+
+ if (list_empty(&atchan->active_list)) {
+ dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
+ desc->txd.cookie);
+ atc_dostart(atchan, desc);
+ list_add_tail(&desc->desc_node, &atchan->active_list);
+ } else {
+ dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
+ desc->txd.cookie);
+ list_add_tail(&desc->desc_node, &atchan->queue);
+ }
+
+ spin_unlock_bh(&atchan->lock);
+
+ return cookie;
+}
+
+/**
+ * atc_prep_dma_memcpy - prepare a memcpy operation
+ * @chan: the channel to prepare operation on
+ * @dest: operation virtual destination address
+ * @src: operation virtual source address
+ * @len: operation length
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_desc *desc = NULL;
+ struct at_desc *first = NULL;
+ struct at_desc *prev = NULL;
+ size_t xfer_count;
+ size_t offset;
+ unsigned int src_width;
+ unsigned int dst_width;
+ u32 ctrla;
+ u32 ctrlb;
+
+ dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
+ dest, src, len, flags);
+
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ return NULL;
+ }
+
+ ctrla = ATC_DEFAULT_CTRLA;
+ ctrlb = ATC_DEFAULT_CTRLB
+ | ATC_SRC_ADDR_MODE_INCR
+ | ATC_DST_ADDR_MODE_INCR
+ | ATC_FC_MEM2MEM;
+
+ /*
+ * We can be a lot more clever here, but this should take care
+ * of the most common optimization.
+ */
+ if (!((src | dest | len) & 3)) {
+ ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
+ src_width = dst_width = 2;
+ } else if (!((src | dest | len) & 1)) {
+ ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
+ src_width = dst_width = 1;
+ } else {
+ ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
+ src_width = dst_width = 0;
+ }
+
+ for (offset = 0; offset < len; offset += xfer_count << src_width) {
+ xfer_count = min_t(size_t, (len - offset) >> src_width,
+ ATC_BTSIZE_MAX);
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ desc->lli.saddr = src + offset;
+ desc->lli.daddr = dest + offset;
+ desc->lli.ctrla = ctrla | xfer_count;
+ desc->lli.ctrlb = ctrlb;
+
+ desc->txd.cookie = 0;
+ async_tx_ack(&desc->txd);
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ }
+
+ /* First descriptor of the chain embedds additional information */
+ first->txd.cookie = -EBUSY;
+ first->len = len;
+
+ /* set end-of-link to the last link descriptor of list*/
+ set_desc_eol(desc);
+
+ desc->txd.flags = flags; /* client is in control of this ack */
+
+ return &first->txd;
+
+err_desc_get:
+ atc_desc_put(atchan, first);
+ return NULL;
+}
+
+
+/**
+ * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_data_direction direction,
+ unsigned long flags)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma_slave *atslave = chan->private;
+ struct at_desc *first = NULL;
+ struct at_desc *prev = NULL;
+ u32 ctrla;
+ u32 ctrlb;
+ dma_addr_t reg;
+ unsigned int reg_width;
+ unsigned int mem_width;
+ unsigned int i;
+ struct scatterlist *sg;
+ size_t total_len = 0;
+
+ dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n",
+ direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE",
+ flags);
+
+ if (unlikely(!atslave || !sg_len)) {
+ dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ return NULL;
+ }
+
+ reg_width = atslave->reg_width;
+
+ sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
+
+ ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
+ ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ ctrla |= ATC_DST_WIDTH(reg_width);
+ ctrlb |= ATC_DST_ADDR_MODE_FIXED
+ | ATC_SRC_ADDR_MODE_INCR
+ | ATC_FC_MEM2PER;
+ reg = atslave->tx_reg;
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_desc *desc;
+ u32 len;
+ u32 mem;
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ mem = sg_phys(sg);
+ len = sg_dma_len(sg);
+ mem_width = 2;
+ if (unlikely(mem & 3 || len & 3))
+ mem_width = 0;
+
+ desc->lli.saddr = mem;
+ desc->lli.daddr = reg;
+ desc->lli.ctrla = ctrla
+ | ATC_SRC_WIDTH(mem_width)
+ | len >> mem_width;
+ desc->lli.ctrlb = ctrlb;
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ total_len += len;
+ }
+ break;
+ case DMA_FROM_DEVICE:
+ ctrla |= ATC_SRC_WIDTH(reg_width);
+ ctrlb |= ATC_DST_ADDR_MODE_INCR
+ | ATC_SRC_ADDR_MODE_FIXED
+ | ATC_FC_PER2MEM;
+
+ reg = atslave->rx_reg;
+ for_each_sg(sgl, sg, sg_len, i) {
+ struct at_desc *desc;
+ u32 len;
+ u32 mem;
+
+ desc = atc_desc_get(atchan);
+ if (!desc)
+ goto err_desc_get;
+
+ mem = sg_phys(sg);
+ len = sg_dma_len(sg);
+ mem_width = 2;
+ if (unlikely(mem & 3 || len & 3))
+ mem_width = 0;
+
+ desc->lli.saddr = reg;
+ desc->lli.daddr = mem;
+ desc->lli.ctrla = ctrla
+ | ATC_DST_WIDTH(mem_width)
+ | len >> mem_width;
+ desc->lli.ctrlb = ctrlb;
+
+ if (!first) {
+ first = desc;
+ } else {
+ /* inform the HW lli about chaining */
+ prev->lli.dscr = desc->txd.phys;
+ /* insert the link descriptor to the LD ring */
+ list_add_tail(&desc->desc_node,
+ &first->txd.tx_list);
+ }
+ prev = desc;
+ total_len += len;
+ }
+ break;
+ default:
+ return NULL;
+ }
+
+ /* set end-of-link to the last link descriptor of list*/
+ set_desc_eol(prev);
+
+ /* First descriptor of the chain embedds additional information */
+ first->txd.cookie = -EBUSY;
+ first->len = total_len;
+
+ /* last link descriptor of list is responsible of flags */
+ prev->txd.flags = flags; /* client is in control of this ack */
+
+ return &first->txd;
+
+err_desc_get:
+ dev_err(chan2dev(chan), "not enough descriptors available\n");
+ atc_desc_put(atchan, first);
+ return NULL;
+}
+
+static void atc_terminate_all(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ /*
+ * This is only called when something went wrong elsewhere, so
+ * we don't really care about the data. Just disable the
+ * channel. We still have to poll the channel enable bit due
+ * to AHB/HSB limitations.
+ */
+ spin_lock_bh(&atchan->lock);
+
+ dma_writel(atdma, CHDR, atchan->mask);
+
+ /* confirm that this channel is disabled */
+ while (dma_readl(atdma, CHSR) & atchan->mask)
+ cpu_relax();
+
+ /* active_list entries will end up before queued entries */
+ list_splice_init(&atchan->queue, &list);
+ list_splice_init(&atchan->active_list, &list);
+
+ spin_unlock_bh(&atchan->lock);
+
+ /* Flush all pending and queued descriptors */
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @done: if not %NULL, updated with last completed transaction
+ * @used: if not %NULL, updated with last used transaction
+ *
+ * If @done and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static enum dma_status
+atc_is_tx_complete(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+ enum dma_status ret;
+
+ dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
+ cookie, done ? *done : 0, used ? *used : 0);
+
+ spin_lock_bh(atchan->lock);
+
+ last_complete = atchan->completed_cookie;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ if (ret != DMA_SUCCESS) {
+ atc_cleanup_descriptors(atchan);
+
+ last_complete = atchan->completed_cookie;
+ last_used = chan->cookie;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ }
+
+ spin_unlock_bh(atchan->lock);
+
+ if (done)
+ *done = last_complete;
+ if (used)
+ *used = last_used;
+
+ return ret;
+}
+
+/**
+ * atc_issue_pending - try to finish work
+ * @chan: target DMA channel
+ */
+static void atc_issue_pending(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ dev_vdbg(chan2dev(chan), "issue_pending\n");
+
+ if (!atc_chan_is_enabled(atchan)) {
+ spin_lock_bh(&atchan->lock);
+ atc_advance_work(atchan);
+ spin_unlock_bh(&atchan->lock);
+ }
+}
+
+/**
+ * atc_alloc_chan_resources - allocate resources for DMA channel
+ * @chan: allocate descriptor resources for this channel
+ * @client: current client requesting the channel be ready for requests
+ *
+ * return - the number of allocated descriptors
+ */
+static int atc_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc;
+ struct at_dma_slave *atslave;
+ int i;
+ u32 cfg;
+ LIST_HEAD(tmp_list);
+
+ dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
+
+ /* ASSERT: channel is idle */
+ if (atc_chan_is_enabled(atchan)) {
+ dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+ return -EIO;
+ }
+
+ cfg = ATC_DEFAULT_CFG;
+
+ atslave = chan->private;
+ if (atslave) {
+ /*
+ * We need controller-specific data to set up slave
+ * transfers.
+ */
+ BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
+
+ /* if cfg configuration specified take it instad of default */
+ if (atslave->cfg)
+ cfg = atslave->cfg;
+ }
+
+ /* have we already been set up?
+ * reconfigure channel but no need to reallocate descriptors */
+ if (!list_empty(&atchan->free_list))
+ return atchan->descs_allocated;
+
+ /* Allocate initial pool of descriptors */
+ for (i = 0; i < init_nr_desc_per_channel; i++) {
+ desc = atc_alloc_descriptor(chan, GFP_KERNEL);
+ if (!desc) {
+ dev_err(atdma->dma_common.dev,
+ "Only %d initial descriptors\n", i);
+ break;
+ }
+ list_add_tail(&desc->desc_node, &tmp_list);
+ }
+
+ spin_lock_bh(&atchan->lock);
+ atchan->descs_allocated = i;
+ list_splice(&tmp_list, &atchan->free_list);
+ atchan->completed_cookie = chan->cookie = 1;
+ spin_unlock_bh(&atchan->lock);
+
+ /* channel parameters */
+ channel_writel(atchan, CFG, cfg);
+
+ dev_dbg(chan2dev(chan),
+ "alloc_chan_resources: allocated %d descriptors\n",
+ atchan->descs_allocated);
+
+ return atchan->descs_allocated;
+}
+
+/**
+ * atc_free_chan_resources - free all channel resources
+ * @chan: DMA channel
+ */
+static void atc_free_chan_resources(struct dma_chan *chan)
+{
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+ struct at_dma *atdma = to_at_dma(chan->device);
+ struct at_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
+ atchan->descs_allocated);
+
+ /* ASSERT: channel is idle */
+ BUG_ON(!list_empty(&atchan->active_list));
+ BUG_ON(!list_empty(&atchan->queue));
+ BUG_ON(atc_chan_is_enabled(atchan));
+
+ list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+ dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc);
+ list_del(&desc->desc_node);
+ /* free link descriptor */
+ dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
+ }
+ list_splice_init(&atchan->free_list, &list);
+ atchan->descs_allocated = 0;
+
+ dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
+}
+
+
+/*-- Module Management -----------------------------------------------*/
+
+/**
+ * at_dma_off - disable DMA controller
+ * @atdma: the Atmel HDAMC device
+ */
+static void at_dma_off(struct at_dma *atdma)
+{
+ dma_writel(atdma, EN, 0);
+
+ /* disable all interrupts */
+ dma_writel(atdma, EBCIDR, -1L);
+
+ /* confirm that all channels are disabled */
+ while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
+ cpu_relax();
+}
+
+static int __init at_dma_probe(struct platform_device *pdev)
+{
+ struct at_dma_platform_data *pdata;
+ struct resource *io;
+ struct at_dma *atdma;
+ size_t size;
+ int irq;
+ int err;
+ int i;
+
+ /* get DMA Controller parameters from platform */
+ pdata = pdev->dev.platform_data;
+ if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
+ return -EINVAL;
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!io)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ size = sizeof(struct at_dma);
+ size += pdata->nr_channels * sizeof(struct at_dma_chan);
+ atdma = kzalloc(size, GFP_KERNEL);
+ if (!atdma)
+ return -ENOMEM;
+
+ /* discover transaction capabilites from the platform data */
+ atdma->dma_common.cap_mask = pdata->cap_mask;
+ atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+ size = io->end - io->start + 1;
+ if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
+ err = -EBUSY;
+ goto err_kfree;
+ }
+
+ atdma->regs = ioremap(io->start, size);
+ if (!atdma->regs) {
+ err = -ENOMEM;
+ goto err_release_r;
+ }
+
+ atdma->clk = clk_get(&pdev->dev, "dma_clk");
+ if (IS_ERR(atdma->clk)) {
+ err = PTR_ERR(atdma->clk);
+ goto err_clk;
+ }
+ clk_enable(atdma->clk);
+
+ /* force dma off, just in case */
+ at_dma_off(atdma);
+
+ err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
+ if (err)
+ goto err_irq;
+
+ platform_set_drvdata(pdev, atdma);
+
+ /* create a pool of consistent memory blocks for hardware descriptors */
+ atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
+ &pdev->dev, sizeof(struct at_desc),
+ 4 /* word alignment */, 0);
+ if (!atdma->dma_desc_pool) {
+ dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+ err = -ENOMEM;
+ goto err_pool_create;
+ }
+
+ /* clear any pending interrupt */
+ while (dma_readl(atdma, EBCISR))
+ cpu_relax();
+
+ /* initialize channels related values */
+ INIT_LIST_HEAD(&atdma->dma_common.channels);
+ for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+ struct at_dma_chan *atchan = &atdma->chan[i];
+
+ atchan->chan_common.device = &atdma->dma_common;
+ atchan->chan_common.cookie = atchan->completed_cookie = 1;
+ atchan->chan_common.chan_id = i;
+ list_add_tail(&atchan->chan_common.device_node,
+ &atdma->dma_common.channels);
+
+ atchan->ch_regs = atdma->regs + ch_regs(i);
+ spin_lock_init(&atchan->lock);
+ atchan->mask = 1 << i;
+
+ INIT_LIST_HEAD(&atchan->active_list);
+ INIT_LIST_HEAD(&atchan->queue);
+ INIT_LIST_HEAD(&atchan->free_list);
+
+ tasklet_init(&atchan->tasklet, atc_tasklet,
+ (unsigned long)atchan);
+ atc_enable_irq(atchan);
+ }
+
+ /* set base routines */
+ atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
+ atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
+ atdma->dma_common.device_is_tx_complete = atc_is_tx_complete;
+ atdma->dma_common.device_issue_pending = atc_issue_pending;
+ atdma->dma_common.dev = &pdev->dev;
+
+ /* set prep routines based on capability */
+ if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
+ atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
+
+ if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
+ atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
+ atdma->dma_common.device_terminate_all = atc_terminate_all;
+ }
+
+ dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+ dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+ dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
+ dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "",
+ atdma->dma_common.chancnt);
+
+ dma_async_device_register(&atdma->dma_common);
+
+ return 0;
+
+err_pool_create:
+ platform_set_drvdata(pdev, NULL);
+ free_irq(platform_get_irq(pdev, 0), atdma);
+err_irq:
+ clk_disable(atdma->clk);
+ clk_put(atdma->clk);
+err_clk:
+ iounmap(atdma->regs);
+ atdma->regs = NULL;
+err_release_r:
+ release_mem_region(io->start, size);
+err_kfree:
+ kfree(atdma);
+ return err;
+}
+
+static int __exit at_dma_remove(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+ struct dma_chan *chan, *_chan;
+ struct resource *io;
+
+ at_dma_off(atdma);
+ dma_async_device_unregister(&atdma->dma_common);
+
+ dma_pool_destroy(atdma->dma_desc_pool);
+ platform_set_drvdata(pdev, NULL);
+ free_irq(platform_get_irq(pdev, 0), atdma);
+
+ list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+ device_node) {
+ struct at_dma_chan *atchan = to_at_dma_chan(chan);
+
+ /* Disable interrupts */
+ atc_disable_irq(atchan);
+ tasklet_disable(&atchan->tasklet);
+
+ tasklet_kill(&atchan->tasklet);
+ list_del(&chan->device_node);
+ }
+
+ clk_disable(atdma->clk);
+ clk_put(atdma->clk);
+
+ iounmap(atdma->regs);
+ atdma->regs = NULL;
+
+ io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(io->start, io->end - io->start + 1);
+
+ kfree(atdma);
+
+ return 0;
+}
+
+static void at_dma_shutdown(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ at_dma_off(platform_get_drvdata(pdev));
+ clk_disable(atdma->clk);
+}
+
+static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ at_dma_off(platform_get_drvdata(pdev));
+ clk_disable(atdma->clk);
+ return 0;
+}
+
+static int at_dma_resume_early(struct platform_device *pdev)
+{
+ struct at_dma *atdma = platform_get_drvdata(pdev);
+
+ clk_enable(atdma->clk);
+ dma_writel(atdma, EN, AT_DMA_ENABLE);
+ return 0;
+
+}
+
+static struct platform_driver at_dma_driver = {
+ .remove = __exit_p(at_dma_remove),
+ .shutdown = at_dma_shutdown,
+ .suspend_late = at_dma_suspend_late,
+ .resume_early = at_dma_resume_early,
+ .driver = {
+ .name = "at_hdmac",
+ },
+};
+
+static int __init at_dma_init(void)
+{
+ return platform_driver_probe(&at_dma_driver, at_dma_probe);
+}
+module_init(at_dma_init);
+
+static void __exit at_dma_exit(void)
+{
+ platform_driver_unregister(&at_dma_driver);
+}
+module_exit(at_dma_exit);
+
+MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at_hdmac");
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
new file mode 100644
index 0000000..4c972af
--- /dev/null
+++ b/drivers/dma/at_hdmac_regs.h
@@ -0,0 +1,353 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define AT_DMA_MAX_NR_CHANNELS 8
+
+
+#define AT_DMA_GCFG 0x00 /* Global Configuration Register */
+#define AT_DMA_IF_BIGEND(i) (0x1 << (i)) /* AHB-Lite Interface i in Big-endian mode */
+#define AT_DMA_ARB_CFG (0x1 << 4) /* Arbiter mode. */
+#define AT_DMA_ARB_CFG_FIXED (0x0 << 4)
+#define AT_DMA_ARB_CFG_ROUND_ROBIN (0x1 << 4)
+
+#define AT_DMA_EN 0x04 /* Controller Enable Register */
+#define AT_DMA_ENABLE (0x1 << 0)
+
+#define AT_DMA_SREQ 0x08 /* Software Single Request Register */
+#define AT_DMA_SSREQ(x) (0x1 << ((x) << 1)) /* Request a source single transfer on channel x */
+#define AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination single transfer on channel x */
+
+#define AT_DMA_CREQ 0x0C /* Software Chunk Transfer Request Register */
+#define AT_DMA_SCREQ(x) (0x1 << ((x) << 1)) /* Request a source chunk transfer on channel x */
+#define AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination chunk transfer on channel x */
+
+#define AT_DMA_LAST 0x10 /* Software Last Transfer Flag Register */
+#define AT_DMA_SLAST(x) (0x1 << ((x) << 1)) /* This src rq is last tx of buffer on channel x */
+#define AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1))) /* This dst rq is last tx of buffer on channel x */
+
+#define AT_DMA_SYNC 0x14 /* Request Synchronization Register */
+#define AT_DMA_SYR(h) (0x1 << (h)) /* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define AT_DMA_EBCIER 0x18 /* Enable register */
+#define AT_DMA_EBCIDR 0x1C /* Disable register */
+#define AT_DMA_EBCIMR 0x20 /* Mask Register */
+#define AT_DMA_EBCISR 0x24 /* Status Register */
+#define AT_DMA_CBTC_OFFSET 8
+#define AT_DMA_ERR_OFFSET 16
+#define AT_DMA_BTC(x) (0x1 << (x))
+#define AT_DMA_CBTC(x) (0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define AT_DMA_ERR(x) (0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define AT_DMA_CHER 0x28 /* Channel Handler Enable Register */
+#define AT_DMA_ENA(x) (0x1 << (x))
+#define AT_DMA_SUSP(x) (0x1 << ( 8 + (x)))
+#define AT_DMA_KEEP(x) (0x1 << (24 + (x)))
+
+#define AT_DMA_CHDR 0x2C /* Channel Handler Disable Register */
+#define AT_DMA_DIS(x) (0x1 << (x))
+#define AT_DMA_RES(x) (0x1 << ( 8 + (x)))
+
+#define AT_DMA_CHSR 0x30 /* Channel Handler Status Register */
+#define AT_DMA_EMPT(x) (0x1 << (16 + (x)))
+#define AT_DMA_STAL(x) (0x1 << (24 + (x)))
+
+
+#define AT_DMA_CH_REGS_BASE 0x3C /* Channel registers base address */
+#define ch_regs(x) (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define ATC_SADDR_OFFSET 0x00 /* Source Address Register */
+#define ATC_DADDR_OFFSET 0x04 /* Destination Address Register */
+#define ATC_DSCR_OFFSET 0x08 /* Descriptor Address Register */
+#define ATC_CTRLA_OFFSET 0x0C /* Control A Register */
+#define ATC_CTRLB_OFFSET 0x10 /* Control B Register */
+#define ATC_CFG_OFFSET 0x14 /* Configuration Register */
+#define ATC_SPIP_OFFSET 0x18 /* Src PIP Configuration Register */
+#define ATC_DPIP_OFFSET 0x1C /* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define ATC_DSCR_IF(i) (0x3 & (i)) /* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */
+#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */
+#define ATC_SRC_WIDTH(x) ((x) << 24)
+#define ATC_SRC_WIDTH_BYTE (0x0 << 24)
+#define ATC_SRC_WIDTH_HALFWORD (0x1 << 24)
+#define ATC_SRC_WIDTH_WORD (0x2 << 24)
+#define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */
+#define ATC_DST_WIDTH(x) ((x) << 28)
+#define ATC_DST_WIDTH_BYTE (0x0 << 28)
+#define ATC_DST_WIDTH_HALFWORD (0x1 << 28)
+#define ATC_DST_WIDTH_WORD (0x2 << 28)
+#define ATC_DONE (0x1 << 31) /* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */
+#define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */
+#define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */
+#define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */
+#define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */
+#define ATC_DST_DSCR_DIS (0x1 << 20) /* Dst Descriptor fetch disable */
+#define ATC_FC_MASK (0x7 << 21) /* Choose Flow Controller */
+#define ATC_FC_MEM2MEM (0x0 << 21) /* Mem-to-Mem (DMA) */
+#define ATC_FC_MEM2PER (0x1 << 21) /* Mem-to-Periph (DMA) */
+#define ATC_FC_PER2MEM (0x2 << 21) /* Periph-to-Mem (DMA) */
+#define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */
+#define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */
+#define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */
+#define ATC_FC_PER2PER_SRCPER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */
+#define ATC_FC_PER2PER_DSTPER (0x7 << 21) /* Periph-to-Periph (Dst Peripheral) */
+#define ATC_SRC_ADDR_MODE_MASK (0x3 << 24)
+#define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */
+#define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */
+#define ATC_SRC_ADDR_MODE_FIXED (0x2 << 24) /* Fixed Mode */
+#define ATC_DST_ADDR_MODE_MASK (0x3 << 28)
+#define ATC_DST_ADDR_MODE_INCR (0x0 << 28) /* Incrementing Mode */
+#define ATC_DST_ADDR_MODE_DECR (0x1 << 28) /* Decrementing Mode */
+#define ATC_DST_ADDR_MODE_FIXED (0x2 << 28) /* Fixed Mode */
+#define ATC_IEN (0x1 << 30) /* BTC interrupt enable (active low) */
+#define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define ATC_SPIP_HOLE(x) (0xFFFFU & (x))
+#define ATC_SPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define ATC_DPIP_HOLE(x) (0xFFFFU & (x))
+#define ATC_DPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
+
+
+/*-- descriptors -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+ /* values that are not changed by hardware */
+ dma_addr_t saddr;
+ dma_addr_t daddr;
+ /* value that may get written back: */
+ u32 ctrla;
+ /* more values that are not changed by hardware */
+ u32 ctrlb;
+ dma_addr_t dscr; /* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+ /* FIRST values the hardware uses */
+ struct at_lli lli;
+
+ /* THEN values for driver housekeeping */
+ struct dma_async_tx_descriptor txd;
+ struct list_head desc_node;
+ size_t len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+ return container_of(txd, struct at_desc, txd);
+}
+
+
+/*-- Channels --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ * to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+ struct dma_chan chan_common;
+ struct at_dma *device;
+ void __iomem *ch_regs;
+ u8 mask;
+ unsigned long error_status;
+ struct tasklet_struct tasklet;
+
+ spinlock_t lock;
+
+ /* these other elements are all protected by lock */
+ dma_cookie_t completed_cookie;
+ struct list_head active_list;
+ struct list_head queue;
+ struct list_head free_list;
+ unsigned int descs_allocated;
+};
+
+#define channel_readl(atchan, name) \
+ __raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define channel_writel(atchan, name, val) \
+ __raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+ return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*-- Controller ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+ struct dma_device dma_common;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u8 all_chan_mask;
+
+ struct dma_pool *dma_desc_pool;
+ /* AT THE END channels table */
+ struct at_dma_chan chan[0];
+};
+
+#define dma_readl(atdma, name) \
+ __raw_readl((atdma)->regs + AT_DMA_##name)
+#define dma_writel(atdma, name, val) \
+ __raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+ return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*-- Helper functions ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+ return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+ return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel %d : imr = 0x%x, chsr = 0x%x\n",
+ atchan->chan_common.chan_id,
+ dma_readl(atdma, EBCIMR),
+ dma_readl(atdma, CHSR));
+
+ dev_err(chan2dev(&atchan->chan_common),
+ " channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+ channel_readl(atchan, SADDR),
+ channel_readl(atchan, DADDR),
+ channel_readl(atchan, CTRLA),
+ channel_readl(atchan, CTRLB),
+ channel_readl(atchan, CFG),
+ channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+ dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+ " desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+ lli->saddr, lli->daddr,
+ lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+ u32 ebci;
+
+ /* enable interrupts on buffer chain completion & error */
+ ebci = AT_DMA_CBTC(atchan->chan_common.chan_id)
+ | AT_DMA_ERR(atchan->chan_common.chan_id);
+ if (on)
+ dma_writel(atdma, EBCIER, ebci);
+ else
+ dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+ atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+ atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+ struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
+
+ return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+ desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+ desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index fb7da51..d93017f 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -38,6 +38,11 @@
MODULE_PARM_DESC(max_channels,
"Maximum number of channels to use (default: all)");
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+ "Iterations before stopping test (default: infinite)");
+
static unsigned int xor_sources = 3;
module_param(xor_sources, uint, S_IRUGO);
MODULE_PARM_DESC(xor_sources,
@@ -114,7 +119,7 @@
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
for ( ; i < start + len; i++)
buf[i] = PATTERN_SRC | PATTERN_COPY
- | (~i & PATTERN_COUNT_MASK);;
+ | (~i & PATTERN_COUNT_MASK);
for ( ; i < test_buf_size; i++)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
buf++;
@@ -270,7 +275,8 @@
flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
- while (!kthread_should_stop()) {
+ while (!kthread_should_stop()
+ && !(iterations && total_tests >= iterations)) {
struct dma_device *dev = chan->device;
struct dma_async_tx_descriptor *tx = NULL;
dma_addr_t dma_srcs[src_cnt];
@@ -416,6 +422,13 @@
err_srcs:
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
+
+ if (iterations > 0)
+ while (!kthread_should_stop()) {
+ DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+ interruptible_sleep_on(&wait_dmatest_exit);
+ }
+
return ret;
}
@@ -495,11 +508,11 @@
if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_XOR);
- thread_count += cnt > 0 ?: 0;
+ thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index f18d1bd..ef87a89 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -12,6 +12,11 @@
* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
* The support for MPC8349 DMA contorller is also added.
*
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -49,9 +54,10 @@
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
* EOTIE - End-of-transfer interrupt enable
+ * PRC_RM - PCI read multiple
*/
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
- 32);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+ | FSL_DMA_MR_PRC_RM, 32);
break;
}
@@ -136,15 +142,16 @@
static void dma_start(struct fsl_dma_chan *fsl_chan)
{
- u32 mr_set = 0;;
+ u32 mr_set = 0;
if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
mr_set |= FSL_DMA_MR_EMP_EN;
- } else
+ } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
& ~FSL_DMA_MR_EMP_EN, 32);
+ }
if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
mr_set |= FSL_DMA_MR_EMS_EN;
@@ -871,9 +878,9 @@
switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
- new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
case FSL_DMA_IP_83XX:
+ new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
}
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index 4f21a51..dc7f268 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -38,6 +38,7 @@
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
+#define FSL_DMA_MR_PRC_RM 0x00000800
#define FSL_DMA_SR_CH 0x00000020
#define FSL_DMA_SR_PE 0x00000010
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index ddab94f..3f23eab 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1176,7 +1176,7 @@
if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
- dma_dev->max_xor = 8; ;
+ dma_dev->max_xor = 8;
dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
}
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c36bf40..e2a10bc 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -754,13 +754,13 @@
static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
int bit;
- enum dev_type edac_cap = EDAC_NONE;
+ enum dev_type edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
? 19
: 17;
- if (pvt->dclr0 >> BIT(bit))
+ if (pvt->dclr0 & BIT(bit))
edac_cap = EDAC_FLAG_SECDED;
return edac_cap;
@@ -868,6 +868,8 @@
goto err_reg;
}
+ return;
+
err_reg:
debugf0("Error reading F2x%03x.\n", reg);
}
@@ -970,7 +972,7 @@
}
for (cs = 0; cs < pvt->num_dcsm; cs++) {
- reg = K8_DCSB0 + (cs * 4);
+ reg = K8_DCSM0 + (cs * 4);
err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
&pvt->dcsm0[cs]);
if (unlikely(err))
@@ -1269,7 +1271,7 @@
if (channels == 0)
channels = 1;
- debugf0("DIMM count= %d\n", channels);
+ debugf0("MCT channel count: %d\n", channels);
return channels;
@@ -2634,6 +2636,8 @@
amd64_dump_misc_regs(pvt);
+ return;
+
err_reg:
debugf0("Reading an MC register failed\n");
@@ -2966,12 +2970,20 @@
" Use of the override can cause "
"unknown side effects.\n");
ret = -ENODEV;
- }
+ } else
+ /*
+ * enable further driver loading if ECC enable is
+ * overridden.
+ */
+ ret = 0;
} else {
amd64_printk(KERN_INFO,
"ECC is enabled by BIOS, Proceeding "
"with EDAC module initialization\n");
+ /* Signal good ECC status */
+ ret = 0;
+
/* CLEAR the override, since BIOS controlled it */
ecc_enable_override = 0;
}
@@ -3006,7 +3018,6 @@
mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
- mci->edac_cap = EDAC_FLAG_NONE;
if (pvt->nbcap & K8_NBCAP_SECDED)
mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
@@ -3052,7 +3063,7 @@
if (!pvt)
goto err_exit;
- pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+ pvt->mc_node_id = get_node_id(dram_f2_ctl);
pvt->dram_f2_ctl = dram_f2_ctl;
pvt->ext_model = boot_cpu_data.x86_model >> 4;
@@ -3179,8 +3190,7 @@
{
int ret = 0;
- debugf0("(MC node=%d,mc_type='%s')\n",
- get_mc_node_id_from_pdev(pdev),
+ debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
get_amd_family_name(mc_type->driver_data));
ret = pci_enable_device(pdev);
@@ -3319,15 +3329,17 @@
err = amd64_init_2nd_stage(pvt_lookup[nb]);
if (err)
- goto err_exit;
+ goto err_2nd_stage;
}
amd64_setup_pci_device();
return 0;
+err_2nd_stage:
+ debugf0("2nd stage failed\n");
+
err_exit:
- debugf0("'finish_setup' stage failed\n");
pci_unregister_driver(&amd64_pci_driver);
return err;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index a159957..ba73015 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -444,7 +444,7 @@
#define K8_MSR_MC4ADDR 0x0412
/* AMD sets the first MC device at device ID 0x18. */
-static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+static inline int get_node_id(struct pci_dev *pdev)
{
return PCI_SLOT(pdev->devfn) - 0x18;
}
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3493c6b..871c13b 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -150,6 +150,8 @@
MEM_FB_DDR2, /* fully buffered DDR2 */
MEM_RDDR2, /* Registered DDR2 RAM */
MEM_XDR, /* Rambus XDR */
+ MEM_DDR3, /* DDR3 RAM */
+ MEM_RDDR3, /* Registered DDR3 RAM */
};
#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
@@ -167,6 +169,8 @@
#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
#define MEM_FLAG_XDR BIT(MEM_XDR)
+#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
/* chipset Error Detection and Correction capabilities and mode */
enum edac_type {
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index ad218fe..e1d4ce0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -94,7 +94,9 @@
[MEM_DDR2] = "Unbuffered-DDR2",
[MEM_FB_DDR2] = "FullyBuffered-DDR2",
[MEM_RDDR2] = "Registered-DDR2",
- [MEM_XDR] = "XDR"
+ [MEM_XDR] = "XDR",
+ [MEM_DDR3] = "Unbuffered-DDR3",
+ [MEM_RDDR3] = "Registered-DDR3"
};
static const char *dev_types[] = {
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 7c8c2d7..3f2ccfc 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -757,6 +757,9 @@
case DSC_SDTYPE_DDR2:
mtype = MEM_RDDR2;
break;
+ case DSC_SDTYPE_DDR3:
+ mtype = MEM_RDDR3;
+ break;
default:
mtype = MEM_UNKNOWN;
break;
@@ -769,6 +772,9 @@
case DSC_SDTYPE_DDR2:
mtype = MEM_DDR2;
break;
+ case DSC_SDTYPE_DDR3:
+ mtype = MEM_DDR3;
+ break;
default:
mtype = MEM_UNKNOWN;
break;
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 135b353..52432ee 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -53,6 +53,7 @@
#define DSC_SDTYPE_DDR 0x02000000
#define DSC_SDTYPE_DDR2 0x03000000
+#define DSC_SDTYPE_DDR3 0x07000000
#define DSC_X32_EN 0x00000020
/* Err_Int_En */
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
index 2406c2c..d4ec605 100644
--- a/drivers/edac/x38_edac.c
+++ b/drivers/edac/x38_edac.c
@@ -30,7 +30,7 @@
/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
#define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */
-#define X38_MCHBAR_HIGH 0x4b
+#define X38_MCHBAR_HIGH 0x4c
#define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */
#define X38_MMR_WINDOW_SIZE 16384
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 543fcca..f74edae 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -196,8 +196,8 @@
{
int channel, bandwidth = 0;
- fw_iso_resource_manage(card, generation, 1ULL << 31,
- &channel, &bandwidth, true);
+ fw_iso_resource_manage(card, generation, 1ULL << 31, &channel,
+ &bandwidth, true, card->bm_transaction_data);
if (channel == 31) {
card->broadcast_channel_allocated = true;
device_for_each_child(card->device, (void *)(long)generation,
@@ -230,7 +230,6 @@
bool do_reset = false;
bool root_device_is_running;
bool root_device_is_cmc;
- __be32 lock_data[2];
spin_lock_irqsave(&card->lock, flags);
@@ -273,22 +272,23 @@
goto pick_me;
}
- lock_data[0] = cpu_to_be32(0x3f);
- lock_data[1] = cpu_to_be32(local_id);
+ card->bm_transaction_data[0] = cpu_to_be32(0x3f);
+ card->bm_transaction_data[1] = cpu_to_be32(local_id);
spin_unlock_irqrestore(&card->lock, flags);
rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
irm_id, generation, SCODE_100,
CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
- lock_data, sizeof(lock_data));
+ card->bm_transaction_data,
+ sizeof(card->bm_transaction_data));
if (rcode == RCODE_GENERATION)
/* Another bus reset, BM work has been rescheduled. */
goto out;
if (rcode == RCODE_COMPLETE &&
- lock_data[0] != cpu_to_be32(0x3f)) {
+ card->bm_transaction_data[0] != cpu_to_be32(0x3f)) {
/* Somebody else is BM. Only act as IRM. */
if (local_id == irm_id)
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index d1d30c6..ced186d 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -125,6 +125,7 @@
int generation;
u64 channels;
s32 bandwidth;
+ __be32 transaction_data[2];
struct iso_resource_event *e_alloc, *e_dealloc;
};
@@ -1049,7 +1050,8 @@
r->channels, &channel, &bandwidth,
todo == ISO_RES_ALLOC ||
todo == ISO_RES_REALLOC ||
- todo == ISO_RES_ALLOC_ONCE);
+ todo == ISO_RES_ALLOC_ONCE,
+ r->transaction_data);
/*
* Is this generation outdated already? As long as this resource sticks
* in the idr, it will be scheduled again for a newer generation or at
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 166f19c..110e731 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -177,9 +177,8 @@
*/
static int manage_bandwidth(struct fw_card *card, int irm_id, int generation,
- int bandwidth, bool allocate)
+ int bandwidth, bool allocate, __be32 data[2])
{
- __be32 data[2];
int try, new, old = allocate ? BANDWIDTH_AVAILABLE_INITIAL : 0;
/*
@@ -215,9 +214,9 @@
}
static int manage_channel(struct fw_card *card, int irm_id, int generation,
- u32 channels_mask, u64 offset, bool allocate)
+ u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
{
- __be32 data[2], c, all, old;
+ __be32 c, all, old;
int i, retry = 5;
old = all = allocate ? cpu_to_be32(~0) : 0;
@@ -260,7 +259,7 @@
}
static void deallocate_channel(struct fw_card *card, int irm_id,
- int generation, int channel)
+ int generation, int channel, __be32 buffer[2])
{
u32 mask;
u64 offset;
@@ -269,7 +268,7 @@
offset = channel < 32 ? CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI :
CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO;
- manage_channel(card, irm_id, generation, mask, offset, false);
+ manage_channel(card, irm_id, generation, mask, offset, false, buffer);
}
/**
@@ -298,7 +297,7 @@
*/
void fw_iso_resource_manage(struct fw_card *card, int generation,
u64 channels_mask, int *channel, int *bandwidth,
- bool allocate)
+ bool allocate, __be32 buffer[2])
{
u32 channels_hi = channels_mask; /* channels 31...0 */
u32 channels_lo = channels_mask >> 32; /* channels 63...32 */
@@ -310,10 +309,12 @@
if (channels_hi)
c = manage_channel(card, irm_id, generation, channels_hi,
- CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI, allocate);
+ CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_HI,
+ allocate, buffer);
if (channels_lo && c < 0) {
c = manage_channel(card, irm_id, generation, channels_lo,
- CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO, allocate);
+ CSR_REGISTER_BASE + CSR_CHANNELS_AVAILABLE_LO,
+ allocate, buffer);
if (c >= 0)
c += 32;
}
@@ -325,12 +326,13 @@
if (*bandwidth == 0)
return;
- ret = manage_bandwidth(card, irm_id, generation, *bandwidth, allocate);
+ ret = manage_bandwidth(card, irm_id, generation, *bandwidth,
+ allocate, buffer);
if (ret < 0)
*bandwidth = 0;
if (allocate && ret < 0 && c >= 0) {
- deallocate_channel(card, irm_id, generation, c);
+ deallocate_channel(card, irm_id, generation, c, buffer);
*channel = ret;
}
}
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index c3cfc64..6052816 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -120,7 +120,8 @@
int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
void fw_iso_resource_manage(struct fw_card *card, int generation,
- u64 channels_mask, int *channel, int *bandwidth, bool allocate);
+ u64 channels_mask, int *channel, int *bandwidth,
+ bool allocate, __be32 buffer[2]);
/* -topology */
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 24c4563..8d51568 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -201,6 +201,12 @@
#define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */
/*
+ * There is no transport protocol limit to the CDB length, but we implement
+ * a fixed length only. 16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE 16
+
+/*
* The default maximum s/g segment size of a FireWire controller is
* usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
* be quadlet-aligned, we set the length limit to 0xffff & ~3.
@@ -312,7 +318,7 @@
struct sbp2_pointer next;
struct sbp2_pointer data_descriptor;
__be32 misc;
- u8 command_block[12];
+ u8 command_block[SBP2_MAX_CDB_SIZE];
} request;
struct scsi_cmnd *cmd;
scsi_done_fn_t done;
@@ -1146,6 +1152,8 @@
if (fw_device_enable_phys_dma(device) < 0)
goto fail_shost_put;
+ shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
+
if (scsi_add_host(shost, &unit->device) < 0)
goto fail_shost_put;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3582c39..96dda81 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -79,6 +79,12 @@
help
Say yes here to support the Xilinx FPGA GPIO device
+config GPIO_VR41XX
+ tristate "NEC VR4100 series General-purpose I/O Uint support"
+ depends on CPU_VR41XX
+ help
+ Say yes here to support the NEC VR4100 series General-purpose I/O Uint
+
comment "I2C GPIO expanders:"
config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ef90203..9244c6f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -13,3 +13,4 @@
obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
+obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index aa8e7cb..4ee4c83 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -109,6 +109,16 @@
writeb(!!value << offset, chip->base + (1 << (offset + 2)));
}
+static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+ if (chip->irq_base == (unsigned) -1)
+ return -EINVAL;
+
+ return chip->irq_base + offset;
+}
+
/*
* PL061 GPIO IRQ
*/
@@ -200,7 +210,7 @@
desc->chip->ack(irq);
list_for_each(ptr, chip_list) {
unsigned long pending;
- int gpio;
+ int offset;
chip = list_entry(ptr, struct pl061_gpio, list);
pending = readb(chip->base + GPIOMIS);
@@ -209,8 +219,8 @@
if (pending == 0)
continue;
- for_each_bit(gpio, &pending, PL061_GPIO_NR)
- generic_handle_irq(gpio_to_irq(gpio));
+ for_each_bit(offset, &pending, PL061_GPIO_NR)
+ generic_handle_irq(pl061_to_irq(&chip->gc, offset));
}
desc->chip->unmask(irq);
}
@@ -221,7 +231,7 @@
struct pl061_gpio *chip;
struct list_head *chip_list;
int ret, irq, i;
- static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)];
+ static DECLARE_BITMAP(init_irq, NR_IRQS);
pdata = dev->dev.platform_data;
if (pdata == NULL)
@@ -251,6 +261,7 @@
chip->gc.direction_output = pl061_direction_output;
chip->gc.get = pl061_get_value;
chip->gc.set = pl061_set_value;
+ chip->gc.to_irq = pl061_to_irq;
chip->gc.base = pdata->gpio_base;
chip->gc.ngpio = PL061_GPIO_NR;
chip->gc.label = dev_name(&dev->dev);
@@ -280,6 +291,7 @@
if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
if (chip_list == NULL) {
+ clear_bit(irq, init_irq);
ret = -ENOMEM;
goto iounmap;
}
diff --git a/drivers/char/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c
similarity index 66%
rename from drivers/char/vr41xx_giu.c
rename to drivers/gpio/vr41xx_giu.c
index 54c8372..b16c9a8 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/gpio/vr41xx_giu.c
@@ -2,8 +2,8 @@
* Driver for NEC VR4100 series General-purpose I/O Unit.
*
* Copyright (C) 2002 MontaVista Software Inc.
- * Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Author: Yoichi Yuasa <source@mvista.com>
+ * Copyright (C) 2003-2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,29 +21,25 @@
*/
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/types.h>
-#include <asm/io.h>
#include <asm/vr41xx/giu.h>
#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/vr41xx.h>
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("NEC VR4100 series General-purpose I/O Unit driver");
MODULE_LICENSE("GPL");
-static int major; /* default is dynamic major device number */
-module_param(major, int, 0);
-MODULE_PARM_DESC(major, "Major device number");
-
#define GIUIOSELL 0x00
#define GIUIOSELH 0x02
#define GIUPIODL 0x04
@@ -76,9 +72,13 @@
#define GPIO_HAS_OUTPUT_ENABLE 0x0002
#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100
-static spinlock_t giu_lock;
+enum {
+ GPIO_INPUT,
+ GPIO_OUTPUT,
+};
+
+static DEFINE_SPINLOCK(giu_lock);
static unsigned long giu_flags;
-static unsigned int giu_nr_pins;
static void __iomem *giu_base;
@@ -89,9 +89,9 @@
#define GIUINT_HIGH_OFFSET 16
#define GIUINT_HIGH_MAX 32
-static inline uint16_t giu_set(uint16_t offset, uint16_t set)
+static inline u16 giu_set(u16 offset, u16 set)
{
- uint16_t data;
+ u16 data;
data = giu_read(offset);
data |= set;
@@ -100,9 +100,9 @@
return data;
}
-static inline uint16_t giu_clear(uint16_t offset, uint16_t clear)
+static inline u16 giu_clear(u16 offset, u16 clear)
{
- uint16_t data;
+ u16 data;
data = giu_read(offset);
data &= ~clear;
@@ -145,7 +145,8 @@
static void ack_giuint_high(unsigned int irq)
{
- giu_write(GIUINTSTATH, 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
+ giu_write(GIUINTSTATH,
+ 1 << (GPIO_PIN_OF_IRQ(irq) - GIUINT_HIGH_OFFSET));
}
static void mask_giuint_high(unsigned int irq)
@@ -177,7 +178,7 @@
static int giu_get_irq(unsigned int irq)
{
- uint16_t pendl, pendh, maskl, maskh;
+ u16 pendl, pendh, maskl, maskh;
int i;
pendl = giu_read(GIUINTSTATL);
@@ -208,14 +209,15 @@
return -EINVAL;
}
-void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal)
+void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+ irq_signal_t signal)
{
- uint16_t mask;
+ u16 mask;
if (pin < GIUINT_HIGH_OFFSET) {
mask = 1 << pin;
if (trigger != IRQ_TRIGGER_LEVEL) {
- giu_set(GIUINTTYPL, mask);
+ giu_set(GIUINTTYPL, mask);
if (signal == IRQ_SIGNAL_HOLD)
giu_set(GIUINTHTSELL, mask);
else
@@ -237,14 +239,14 @@
}
}
set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_low_irq_chip,
- handle_edge_irq);
+ &giuint_low_irq_chip,
+ handle_edge_irq);
} else {
giu_clear(GIUINTTYPL, mask);
giu_clear(GIUINTHTSELL, mask);
set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_low_irq_chip,
- handle_level_irq);
+ &giuint_low_irq_chip,
+ handle_level_irq);
}
giu_write(GIUINTSTATL, mask);
} else if (pin < GIUINT_HIGH_MAX) {
@@ -272,14 +274,14 @@
}
}
set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_high_irq_chip,
- handle_edge_irq);
+ &giuint_high_irq_chip,
+ handle_edge_irq);
} else {
giu_clear(GIUINTTYPH, mask);
giu_clear(GIUINTHTSELH, mask);
set_irq_chip_and_handler(GIU_IRQ(pin),
- &giuint_high_irq_chip,
- handle_level_irq);
+ &giuint_high_irq_chip,
+ handle_level_irq);
}
giu_write(GIUINTSTATH, mask);
}
@@ -288,7 +290,7 @@
void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
{
- uint16_t mask;
+ u16 mask;
if (pin < GIUINT_HIGH_OFFSET) {
mask = 1 << pin;
@@ -308,89 +310,24 @@
}
EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
-gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
+static int giu_set_direction(struct gpio_chip *chip, unsigned pin, int dir)
{
- uint16_t reg, mask;
-
- if (pin >= giu_nr_pins)
- return GPIO_DATA_INVAL;
-
- if (pin < 16) {
- reg = giu_read(GIUPIODL);
- mask = (uint16_t)1 << pin;
- } else if (pin < 32) {
- reg = giu_read(GIUPIODH);
- mask = (uint16_t)1 << (pin - 16);
- } else if (pin < 48) {
- reg = giu_read(GIUPODATL);
- mask = (uint16_t)1 << (pin - 32);
- } else {
- reg = giu_read(GIUPODATH);
- mask = (uint16_t)1 << (pin - 48);
- }
-
- if (reg & mask)
- return GPIO_DATA_HIGH;
-
- return GPIO_DATA_LOW;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin);
-
-int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
-{
- uint16_t offset, mask, reg;
+ u16 offset, mask, reg;
unsigned long flags;
- if (pin >= giu_nr_pins)
- return -EINVAL;
-
- if (pin < 16) {
- offset = GIUPIODL;
- mask = (uint16_t)1 << pin;
- } else if (pin < 32) {
- offset = GIUPIODH;
- mask = (uint16_t)1 << (pin - 16);
- } else if (pin < 48) {
- offset = GIUPODATL;
- mask = (uint16_t)1 << (pin - 32);
- } else {
- offset = GIUPODATH;
- mask = (uint16_t)1 << (pin - 48);
- }
-
- spin_lock_irqsave(&giu_lock, flags);
-
- reg = giu_read(offset);
- if (data == GPIO_DATA_HIGH)
- reg |= mask;
- else
- reg &= ~mask;
- giu_write(offset, reg);
-
- spin_unlock_irqrestore(&giu_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin);
-
-int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
-{
- uint16_t offset, mask, reg;
- unsigned long flags;
-
- if (pin >= giu_nr_pins)
+ if (pin >= chip->ngpio)
return -EINVAL;
if (pin < 16) {
offset = GIUIOSELL;
- mask = (uint16_t)1 << pin;
+ mask = 1 << pin;
} else if (pin < 32) {
offset = GIUIOSELH;
- mask = (uint16_t)1 << (pin - 16);
+ mask = 1 << (pin - 16);
} else {
if (giu_flags & GPIO_HAS_OUTPUT_ENABLE) {
offset = GIUPODATEN;
- mask = (uint16_t)1 << (pin - 32);
+ mask = 1 << (pin - 32);
} else {
switch (pin) {
case 48:
@@ -420,11 +357,10 @@
return 0;
}
-EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction);
int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
{
- uint16_t reg, mask;
+ u16 reg, mask;
unsigned long flags;
if ((giu_flags & GPIO_HAS_PULLUPDOWN_IO) != GPIO_HAS_PULLUPDOWN_IO)
@@ -433,7 +369,7 @@
if (pin >= 15)
return -EINVAL;
- mask = (uint16_t)1 << pin;
+ mask = 1 << pin;
spin_lock_irqsave(&giu_lock, flags);
@@ -460,146 +396,125 @@
}
EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
-static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
- loff_t *ppos)
+static int vr41xx_gpio_get(struct gpio_chip *chip, unsigned pin)
{
- unsigned int pin;
- char value = '0';
+ u16 reg, mask;
- pin = iminor(file->f_path.dentry->d_inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
+ if (pin >= chip->ngpio)
+ return -EINVAL;
- if (vr41xx_gpio_get_pin(pin) == GPIO_DATA_HIGH)
- value = '1';
-
- if (len <= 0)
- return -EFAULT;
-
- if (put_user(value, buf))
- return -EFAULT;
-
- return 1;
-}
-
-static ssize_t gpio_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- unsigned int pin;
- size_t i;
- char c;
- int retval = 0;
-
- pin = iminor(file->f_path.dentry->d_inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
-
- for (i = 0; i < len; i++) {
- if (get_user(c, data + i))
- return -EFAULT;
-
- switch (c) {
- case '0':
- retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_LOW);
- break;
- case '1':
- retval = vr41xx_gpio_set_pin(pin, GPIO_DATA_HIGH);
- break;
- case 'D':
- printk(KERN_INFO "GPIO%d: pull down\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DOWN);
- break;
- case 'd':
- printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
- break;
- case 'I':
- printk(KERN_INFO "GPIO%d: input\n", pin);
- retval = vr41xx_gpio_set_direction(pin, GPIO_INPUT);
- break;
- case 'O':
- printk(KERN_INFO "GPIO%d: output\n", pin);
- retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT);
- break;
- case 'o':
- printk(KERN_INFO "GPIO%d: output disable\n", pin);
- retval = vr41xx_gpio_set_direction(pin, GPIO_OUTPUT_DISABLE);
- break;
- case 'P':
- printk(KERN_INFO "GPIO%d: pull up\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_UP);
- break;
- case 'p':
- printk(KERN_INFO "GPIO%d: pull up/down disable\n", pin);
- retval = vr41xx_gpio_pullupdown(pin, GPIO_PULL_DISABLE);
- break;
- default:
- break;
- }
-
- if (retval < 0)
- break;
+ if (pin < 16) {
+ reg = giu_read(GIUPIODL);
+ mask = 1 << pin;
+ } else if (pin < 32) {
+ reg = giu_read(GIUPIODH);
+ mask = 1 << (pin - 16);
+ } else if (pin < 48) {
+ reg = giu_read(GIUPODATL);
+ mask = 1 << (pin - 32);
+ } else {
+ reg = giu_read(GIUPODATH);
+ mask = 1 << (pin - 48);
}
- return i;
-}
-
-static int gpio_open(struct inode *inode, struct file *file)
-{
- unsigned int pin;
-
- cycle_kernel_lock();
- pin = iminor(inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
-
- return nonseekable_open(inode, file);
-}
-
-static int gpio_release(struct inode *inode, struct file *file)
-{
- unsigned int pin;
-
- pin = iminor(inode);
- if (pin >= giu_nr_pins)
- return -EBADF;
+ if (reg & mask)
+ return 1;
return 0;
}
-static const struct file_operations gpio_fops = {
- .owner = THIS_MODULE,
- .read = gpio_read,
- .write = gpio_write,
- .open = gpio_open,
- .release = gpio_release,
+static void vr41xx_gpio_set(struct gpio_chip *chip, unsigned pin,
+ int value)
+{
+ u16 offset, mask, reg;
+ unsigned long flags;
+
+ if (pin >= chip->ngpio)
+ return;
+
+ if (pin < 16) {
+ offset = GIUPIODL;
+ mask = 1 << pin;
+ } else if (pin < 32) {
+ offset = GIUPIODH;
+ mask = 1 << (pin - 16);
+ } else if (pin < 48) {
+ offset = GIUPODATL;
+ mask = 1 << (pin - 32);
+ } else {
+ offset = GIUPODATH;
+ mask = 1 << (pin - 48);
+ }
+
+ spin_lock_irqsave(&giu_lock, flags);
+
+ reg = giu_read(offset);
+ if (value)
+ reg |= mask;
+ else
+ reg &= ~mask;
+ giu_write(offset, reg);
+
+ spin_unlock_irqrestore(&giu_lock, flags);
+}
+
+
+static int vr41xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return giu_set_direction(chip, offset, GPIO_INPUT);
+}
+
+static int vr41xx_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ vr41xx_gpio_set(chip, offset, value);
+
+ return giu_set_direction(chip, offset, GPIO_OUTPUT);
+}
+
+static int vr41xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset >= chip->ngpio)
+ return -EINVAL;
+
+ return GIU_IRQ_BASE + offset;
+}
+
+static struct gpio_chip vr41xx_gpio_chip = {
+ .label = "vr41xx",
+ .owner = THIS_MODULE,
+ .direction_input = vr41xx_gpio_direction_input,
+ .get = vr41xx_gpio_get,
+ .direction_output = vr41xx_gpio_direction_output,
+ .set = vr41xx_gpio_set,
+ .to_irq = vr41xx_gpio_to_irq,
};
-static int __devinit giu_probe(struct platform_device *dev)
+static int __devinit giu_probe(struct platform_device *pdev)
{
struct resource *res;
unsigned int trigger, i, pin;
struct irq_chip *chip;
int irq, retval;
- switch (dev->id) {
+ switch (pdev->id) {
case GPIO_50PINS_PULLUPDOWN:
giu_flags = GPIO_HAS_PULLUPDOWN_IO;
- giu_nr_pins = 50;
+ vr41xx_gpio_chip.ngpio = 50;
break;
case GPIO_36PINS:
- giu_nr_pins = 36;
+ vr41xx_gpio_chip.ngpio = 36;
break;
case GPIO_48PINS_EDGE_SELECT:
giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
- giu_nr_pins = 48;
+ vr41xx_gpio_chip.ngpio = 48;
break;
default:
- printk(KERN_ERR "GIU: unknown ID %d\n", dev->id);
+ dev_err(&pdev->dev, "GIU: unknown ID %d\n", pdev->id);
return -ENODEV;
}
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EBUSY;
@@ -607,19 +522,9 @@
if (!giu_base)
return -ENOMEM;
- retval = register_chrdev(major, "GIU", &gpio_fops);
- if (retval < 0) {
- iounmap(giu_base);
- giu_base = NULL;
- return retval;
- }
+ vr41xx_gpio_chip.dev = &pdev->dev;
- if (major == 0) {
- major = retval;
- printk(KERN_INFO "GIU: major number %d\n", major);
- }
-
- spin_lock_init(&giu_lock);
+ retval = gpiochip_add(&vr41xx_gpio_chip);
giu_write(GIUINTENL, 0);
giu_write(GIUINTENH, 0);
@@ -640,14 +545,14 @@
}
- irq = platform_get_irq(dev, 0);
+ irq = platform_get_irq(pdev, 0);
if (irq < 0 || irq >= nr_irqs)
return -EBUSY;
return cascade_irq(irq, giu_get_irq);
}
-static int __devexit giu_remove(struct platform_device *dev)
+static int __devexit giu_remove(struct platform_device *pdev)
{
if (giu_base) {
iounmap(giu_base);
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c961fe4..39b393d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -81,6 +81,7 @@
config DRM_I915
tristate "i915 driver"
+ depends on AGP_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4e89ab0..fe23f29 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -16,6 +16,7 @@
drm-$(CONFIG_COMPAT) += drm_ioc32.o
obj-$(CONFIG_DRM) += drm.o
+obj-$(CONFIG_DRM_TTM) += ttm/
obj-$(CONFIG_DRM_TDFX) += tdfx/
obj-$(CONFIG_DRM_R128) += r128/
obj-$(CONFIG_DRM_RADEON)+= radeon/
@@ -26,4 +27,3 @@
obj-$(CONFIG_DRM_SIS) += sis/
obj-$(CONFIG_DRM_SAVAGE)+= savage/
obj-$(CONFIG_DRM_VIA) +=via/
-obj-$(CONFIG_DRM_TTM) += ttm/
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 8fab789..33be210 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1461,7 +1461,7 @@
goto out;
}
- if (crtc_req->count_connectors > 0 && !mode && !fb) {
+ if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG("Count connectors is %d but no mode or fb set\n",
crtc_req->count_connectors);
ret = -EINVAL;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index a6f73f1..6aaa2cb 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -706,8 +706,8 @@
struct drm_encoder **save_encoders, *new_encoder;
struct drm_framebuffer *old_fb = NULL;
bool save_enabled;
- bool mode_changed = false;
- bool fb_changed = false;
+ bool mode_changed = false; /* if true do a full mode set */
+ bool fb_changed = false; /* if true and !mode_changed just do a flip */
struct drm_connector *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
@@ -758,6 +758,8 @@
if (set->crtc->fb == NULL) {
DRM_DEBUG("crtc has no fb, full mode set\n");
mode_changed = true;
+ } else if (set->fb == NULL) {
+ mode_changed = true;
} else if ((set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) ||
set->fb->depth != set->crtc->fb->depth)
@@ -1090,6 +1092,8 @@
if (ret == false)
DRM_ERROR("failed to set mode on crtc %p\n", crtc);
}
+ /* disable the unused connectors while restoring the modesetting */
+ drm_helper_disable_unused_functions(dev);
return 0;
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 2960b6d..9903f27 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -101,6 +101,10 @@
continue;
tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
+ if (tmp == NULL) {
+ ret = -1;
+ goto fail;
+ }
ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
root, tmp, &drm_debugfs_fops);
if (!ent) {
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7d08352..80cc6d0 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -294,10 +294,10 @@
unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
- unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
- unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
- unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
- unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
+ unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
+ unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
/* ignore tiny modes */
if (hactive < 64 || vactive < 64)
@@ -347,8 +347,8 @@
mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
- mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
- mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+ mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+ mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
mode->width_mm *= 10;
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 8104eca..ffe8f43 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -134,26 +134,29 @@
BUG_ON((size & (PAGE_SIZE - 1)) != 0);
obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+ if (!obj)
+ goto free;
obj->dev = dev;
obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
- if (IS_ERR(obj->filp)) {
- kfree(obj);
- return NULL;
- }
+ if (IS_ERR(obj->filp))
+ goto free;
kref_init(&obj->refcount);
kref_init(&obj->handlecount);
obj->size = size;
if (dev->driver->gem_init_object != NULL &&
dev->driver->gem_init_object(obj) != 0) {
- fput(obj->filp);
- kfree(obj);
- return NULL;
+ goto fput;
}
atomic_inc(&dev->object_count);
atomic_add(obj->size, &dev->object_memory);
return obj;
+fput:
+ fput(obj->filp);
+free:
+ kfree(obj);
+ return NULL;
}
EXPORT_SYMBOL(drm_gem_object_alloc);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index b4a3dbc..f85aaf2 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -566,7 +566,7 @@
ret = drm_vblank_get(dev, crtc);
if (ret) {
- DRM_ERROR("failed to acquire vblank counter, %d\n", ret);
+ DRM_DEBUG("failed to acquire vblank counter, %d\n", ret);
return ret;
}
seq = drm_vblank_count(dev, crtc);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 54f492a..7914097 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -566,6 +566,8 @@
found_it = 1;
/* if equal delete the probed mode */
mode->status = pmode->status;
+ /* Merge type bits together */
+ mode->type |= pmode->type;
list_del(&pmode->head);
drm_mode_destroy(connector->dev, pmode);
break;
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 155a5bb..55bb8a8 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -489,7 +489,7 @@
*/
void drm_put_dev(struct drm_device *dev)
{
- struct drm_driver *driver = dev->driver;
+ struct drm_driver *driver;
struct drm_map_list *r_list, *list_temp;
DRM_DEBUG("\n");
@@ -498,6 +498,7 @@
DRM_ERROR("cleanup called no dev\n");
return;
}
+ driver = dev->driver;
drm_vblank_cleanup(dev);
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 51c5a05..30d6b99 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -13,6 +13,8 @@
intel_crt.o \
intel_lvds.o \
intel_bios.o \
+ intel_dp.o \
+ intel_dp_i2c.o \
intel_hdmi.o \
intel_sdvo.o \
intel_modes.o \
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index e747ac4..288fc50 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -37,7 +37,7 @@
/* GPIO register used for i2c bus to control this device */
u32 gpio;
int slave_addr;
- struct intel_i2c_chan *i2c_bus;
+ struct i2c_adapter *i2c_bus;
const struct intel_dvo_dev_ops *dev_ops;
void *dev_priv;
@@ -52,7 +52,7 @@
* Returns NULL if the device does not exist.
*/
bool (*init)(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus);
+ struct i2c_adapter *i2cbus);
/*
* Called to allow the output a chance to create properties after the
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index 03d4b49..621815b 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -176,19 +176,20 @@
static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
{
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -208,10 +209,11 @@
static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
{
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -228,8 +230,9 @@
/** Probes for a CH7017 on the given bus and slave address. */
static bool ch7017_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
struct ch7017_priv *priv;
uint8_t val;
@@ -237,8 +240,7 @@
if (priv == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = priv;
if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
@@ -248,7 +250,7 @@
val != CH7018_DEVICE_ID_VALUE &&
val != CH7019_DEVICE_ID_VALUE) {
DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
- val, i2cbus->adapter.name,i2cbus->slave_addr);
+ val, i2cbus->adapter.name,dvo->slave_addr);
goto fail;
}
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index d2fd95d..a9b8962 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -123,19 +123,20 @@
static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -152,7 +153,7 @@
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -161,10 +162,11 @@
static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -178,14 +180,14 @@
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
static bool ch7xxx_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the CH7xxx chip on the specified i2c bus */
struct ch7xxx_priv *ch7xxx;
@@ -196,8 +198,7 @@
if (ch7xxx == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = ch7xxx;
ch7xxx->quiet = true;
@@ -207,7 +208,7 @@
name = ch7xxx_get_id(vendor);
if (!name) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
- vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+ vendor, adapter->name, dvo->slave_addr);
goto out;
}
@@ -217,7 +218,7 @@
if (device != CH7xxx_DID) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
- vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+ vendor, adapter->name, dvo->slave_addr);
goto out;
}
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 0c8d375..aa176f9 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -169,13 +169,14 @@
static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
{
struct ivch_priv *priv = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[1];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 0,
},
@@ -186,7 +187,7 @@
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD | I2C_M_NOSTART,
.len = 2,
.buf = in_buf,
@@ -202,7 +203,7 @@
if (!priv->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -211,10 +212,11 @@
static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
{
struct ivch_priv *priv = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[3];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 3,
.buf = out_buf,
@@ -229,7 +231,7 @@
if (!priv->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -237,7 +239,7 @@
/** Probes the given bus and slave address for an ivch */
static bool ivch_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
struct ivch_priv *priv;
uint16_t temp;
@@ -246,8 +248,7 @@
if (priv == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = priv;
priv->quiet = true;
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index 033a4bb..e1c1f73 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -76,19 +76,20 @@
static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct sil164_priv *sil = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -105,7 +106,7 @@
if (!sil->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -113,10 +114,11 @@
static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct sil164_priv *sil= dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -130,7 +132,7 @@
if (!sil->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -138,7 +140,7 @@
/* Silicon Image 164 driver for chip on i2c bus */
static bool sil164_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the SIL164 chip on the specified i2c bus */
struct sil164_priv *sil;
@@ -148,8 +150,7 @@
if (sil == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = sil;
sil->quiet = true;
@@ -158,7 +159,7 @@
if (ch != (SIL164_VID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
- ch, i2cbus->adapter.name, i2cbus->slave_addr);
+ ch, adapter->name, dvo->slave_addr);
goto out;
}
@@ -167,7 +168,7 @@
if (ch != (SIL164_DID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
- ch, i2cbus->adapter.name, i2cbus->slave_addr);
+ ch, adapter->name, dvo->slave_addr);
goto out;
}
sil->quiet = false;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 207fda8..9ecc907 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -101,19 +101,20 @@
static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -130,7 +131,7 @@
if (!tfp->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -138,10 +139,11 @@
static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -155,7 +157,7 @@
if (!tfp->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -174,7 +176,7 @@
/* Ti TFP410 driver for chip on i2c bus */
static bool tfp410_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the tfp410 chip on the specified i2c bus */
struct tfp410_priv *tfp;
@@ -184,20 +186,19 @@
if (tfp == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = tfp;
tfp->quiet = true;
if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
- id, i2cbus->adapter.name, i2cbus->slave_addr);
+ id, adapter->name, dvo->slave_addr);
goto out;
}
if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
- id, i2cbus->adapter.name, i2cbus->slave_addr);
+ id, adapter->name, dvo->slave_addr);
goto out;
}
tfp->quiet = false;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f112c76..50d1f78 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -846,7 +846,7 @@
return 0;
}
- printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
+ DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr);
dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
@@ -885,8 +885,8 @@
* some RAM for the framebuffer at early boot. This code figures out
* how much was set aside so we can use it for our own purposes.
*/
-static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size,
- unsigned long *preallocated_size)
+static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
+ uint32_t *preallocated_size)
{
struct pci_dev *bridge_dev;
u16 tmp = 0;
@@ -984,10 +984,11 @@
return 0;
}
-static int i915_load_modeset_init(struct drm_device *dev)
+static int i915_load_modeset_init(struct drm_device *dev,
+ unsigned long prealloc_size,
+ unsigned long agp_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- unsigned long agp_size, prealloc_size;
int fb_bar = IS_I9XX(dev) ? 2 : 0;
int ret = 0;
@@ -1002,10 +1003,6 @@
if (IS_I965G(dev) || IS_G33(dev))
dev_priv->cursor_needs_physical = false;
- ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
- if (ret)
- goto out;
-
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
@@ -1082,6 +1079,44 @@
master->driver_priv = NULL;
}
+static void i915_get_mem_freq(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 tmp;
+
+ if (!IS_IGD(dev))
+ return;
+
+ tmp = I915_READ(CLKCFG);
+
+ switch (tmp & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_533:
+ dev_priv->fsb_freq = 533; /* 133*4 */
+ break;
+ case CLKCFG_FSB_800:
+ dev_priv->fsb_freq = 800; /* 200*4 */
+ break;
+ case CLKCFG_FSB_667:
+ dev_priv->fsb_freq = 667; /* 167*4 */
+ break;
+ case CLKCFG_FSB_400:
+ dev_priv->fsb_freq = 400; /* 100*4 */
+ break;
+ }
+
+ switch (tmp & CLKCFG_MEM_MASK) {
+ case CLKCFG_MEM_533:
+ dev_priv->mem_freq = 533;
+ break;
+ case CLKCFG_MEM_667:
+ dev_priv->mem_freq = 667;
+ break;
+ case CLKCFG_MEM_800:
+ dev_priv->mem_freq = 800;
+ break;
+ }
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
@@ -1098,6 +1133,7 @@
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+ uint32_t agp_size, prealloc_size;
/* i915 has 4 more counters */
dev->counters += 4;
@@ -1146,9 +1182,29 @@
"performance may suffer.\n");
}
+ ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
+ if (ret)
+ goto out_iomapfree;
+
+ dev_priv->wq = create_workqueue("i915");
+ if (dev_priv->wq == NULL) {
+ DRM_ERROR("Failed to create our workqueue.\n");
+ ret = -ENOMEM;
+ goto out_iomapfree;
+ }
+
/* enable GEM by default */
dev_priv->has_gem = 1;
+ if (prealloc_size > agp_size * 3 / 4) {
+ DRM_ERROR("Detected broken video BIOS with %d/%dkB of video "
+ "memory stolen.\n",
+ prealloc_size / 1024, agp_size / 1024);
+ DRM_ERROR("Disabling GEM. (try reducing stolen memory or "
+ "updating the BIOS to fix).\n");
+ dev_priv->has_gem = 0;
+ }
+
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || IS_IGDNG(dev)) {
@@ -1162,9 +1218,11 @@
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
- goto out_iomapfree;
+ goto out_workqueue_free;
}
+ i915_get_mem_freq(dev);
+
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
* according to the published specs. It doesn't appear to function
@@ -1180,6 +1238,7 @@
pci_enable_msi(dev->pdev);
spin_lock_init(&dev_priv->user_irq_lock);
+ spin_lock_init(&dev_priv->error_lock);
dev_priv->user_irq_refcount = 0;
ret = drm_vblank_init(dev, I915_NUM_PIPE);
@@ -1190,10 +1249,10 @@
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- ret = i915_load_modeset_init(dev);
+ ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
- goto out_rmmap;
+ goto out_workqueue_free;
}
}
@@ -1204,6 +1263,8 @@
return 0;
+out_workqueue_free:
+ destroy_workqueue(dev_priv->wq);
out_iomapfree:
io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
@@ -1217,6 +1278,8 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ destroy_workqueue(dev_priv->wq);
+
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 98560e1..fc4b68a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -35,6 +35,7 @@
#include "drm_pciids.h"
#include <linux/console.h>
+#include "drm_crtc_helper.h"
static unsigned int i915_modeset = -1;
module_param_named(modeset, i915_modeset, int, 0400);
@@ -57,8 +58,8 @@
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev || !dev_priv) {
- printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv);
- printk(KERN_ERR "DRM not initialized, aborting suspend.\n");
+ DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
+ DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
@@ -67,8 +68,6 @@
pci_save_state(dev->pdev);
- i915_save_state(dev);
-
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
if (i915_gem_idle(dev))
@@ -77,6 +76,8 @@
drm_irq_uninstall(dev);
}
+ i915_save_state(dev);
+
intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
@@ -115,6 +116,10 @@
drm_irq_install(dev);
}
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ /* Resume the modeset for every activated CRTC */
+ drm_helper_resume_force_mode(dev);
+ }
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a84f04..7537f57 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -133,6 +133,22 @@
u8 initialized;
};
+struct drm_i915_error_state {
+ u32 eir;
+ u32 pgtbl_er;
+ u32 pipeastat;
+ u32 pipebstat;
+ u32 ipeir;
+ u32 ipehr;
+ u32 instdone;
+ u32 acthd;
+ u32 instpm;
+ u32 instps;
+ u32 instdone1;
+ u32 seqno;
+ struct timeval time;
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
@@ -203,12 +219,20 @@
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
+ unsigned int edp_support:1;
int lvds_ssc_freq;
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
+ unsigned int fsb_freq, mem_freq;
+
+ spinlock_t error_lock;
+ struct drm_i915_error_state *first_error;
+ struct work_struct error_work;
+ struct workqueue_struct *wq;
+
/* Register state */
u8 saveLBB;
u32 saveDSPACNTR;
@@ -306,6 +330,17 @@
u32 saveCURBPOS;
u32 saveCURBBASE;
u32 saveCURSIZE;
+ u32 saveDP_B;
+ u32 saveDP_C;
+ u32 saveDP_D;
+ u32 savePIPEA_GMCH_DATA_M;
+ u32 savePIPEB_GMCH_DATA_M;
+ u32 savePIPEA_GMCH_DATA_N;
+ u32 savePIPEB_GMCH_DATA_N;
+ u32 savePIPEA_DP_LINK_M;
+ u32 savePIPEB_DP_LINK_M;
+ u32 savePIPEA_DP_LINK_N;
+ u32 savePIPEB_DP_LINK_N;
struct {
struct drm_mm gtt_space;
@@ -457,9 +492,6 @@
*/
int fence_reg;
- /** Boolean whether this object has a valid gtt offset. */
- int gtt_bound;
-
/** How many users have pinned this object in GTT space */
int pin_count;
@@ -644,6 +676,7 @@
int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment);
void i915_gem_object_unpin(struct drm_gem_object *obj);
int i915_gem_object_unbind(struct drm_gem_object *obj);
+void i915_gem_release_mmap(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
uint32_t i915_get_gem_seqno(struct drm_device *dev);
int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
@@ -857,7 +890,11 @@
#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
IS_I915GM(dev)))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_EDP(dev) (IS_IGDNG_M(dev))
#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+/* dsparb controlled by hw only */
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index fd2b8bd..140bee1 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1006,7 +1006,7 @@
mutex_lock(&dev->struct_mutex);
#if WATCH_BUF
- DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+ DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n",
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
@@ -1050,7 +1050,7 @@
}
#if WATCH_BUF
- DRM_INFO("%s: sw_finish %d (%p %d)\n",
+ DRM_INFO("%s: sw_finish %d (%p %zd)\n",
__func__, args->handle, obj, obj->size);
#endif
obj_priv = obj->driver_private;
@@ -1252,6 +1252,31 @@
return ret;
}
+/**
+ * i915_gem_release_mmap - remove physical page mappings
+ * @obj: obj in question
+ *
+ * Preserve the reservation of the mmaping with the DRM core code, but
+ * relinquish ownership of the pages back to the system.
+ *
+ * It is vital that we remove the page mapping if we have mapped a tiled
+ * object through the GTT and then lose the fence register due to
+ * resource pressure. Similarly if the object has been moved out of the
+ * aperture, than pages mapped into userspace must be revoked. Removing the
+ * mapping will then trigger a page fault on the next user access, allowing
+ * fixup by i915_gem_fault().
+ */
+void
+i915_gem_release_mmap(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ if (dev->dev_mapping)
+ unmap_mapping_range(dev->dev_mapping,
+ obj_priv->mmap_offset, obj->size, 1);
+}
+
static void
i915_gem_free_mmap_offset(struct drm_gem_object *obj)
{
@@ -1545,7 +1570,7 @@
}
if (was_empty && !dev_priv->mm.suspended)
- schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
return seqno;
}
@@ -1694,7 +1719,7 @@
i915_gem_retire_requests(dev);
if (!dev_priv->mm.suspended &&
!list_empty(&dev_priv->mm.request_list))
- schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
mutex_unlock(&dev->struct_mutex);
}
@@ -1861,7 +1886,6 @@
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
- loff_t offset;
int ret = 0;
#if WATCH_BUF
@@ -1898,9 +1922,7 @@
BUG_ON(obj_priv->active);
/* blow away mappings if mapped through GTT */
- offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT;
- if (dev->dev_mapping)
- unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
+ i915_gem_release_mmap(obj);
if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
i915_gem_clear_fence_reg(obj);
@@ -2222,7 +2244,6 @@
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
uint32_t seqno = dev_priv->mm.next_gem_seqno;
- loff_t offset;
if (avail == 0)
return -ENOSPC;
@@ -2274,10 +2295,7 @@
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
*/
- offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT;
- if (dev->dev_mapping)
- unmap_mapping_range(dev->dev_mapping, offset,
- reg->obj->size, 1);
+ i915_gem_release_mmap(reg->obj);
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
}
@@ -2423,7 +2441,7 @@
}
#if WATCH_BUF
- DRM_INFO("Binding object of size %d at 0x%08x\n",
+ DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
ret = i915_gem_object_get_pages(obj);
@@ -4227,6 +4245,7 @@
void
i915_gem_load(struct drm_device *dev)
{
+ int i;
drm_i915_private_t *dev_priv = dev->dev_private;
spin_lock_init(&dev_priv->mm.active_list_lock);
@@ -4246,6 +4265,18 @@
else
dev_priv->num_fence_regs = 8;
+ /* Initialize fence registers to zero */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+ }
+
i915_gem_detect_bit_6_swizzle(dev);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8d0b943..e602614 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -87,7 +87,7 @@
chunk_len = page_len - chunk;
if (chunk_len > 128)
chunk_len = 128;
- i915_gem_dump_page(obj_priv->page_list[page],
+ i915_gem_dump_page(obj_priv->pages[page],
chunk, chunk + chunk_len,
obj_priv->gtt_offset +
page * PAGE_SIZE,
@@ -143,7 +143,7 @@
uint32_t *backing_map = NULL;
int bad_count = 0;
- DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n",
+ DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
__func__, obj, obj_priv->gtt_offset, handle,
obj->size / 1024);
@@ -157,7 +157,7 @@
for (page = 0; page < obj->size / PAGE_SIZE; page++) {
int i;
- backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0);
+ backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0);
if (backing_map == NULL) {
DRM_ERROR("failed to map backing page\n");
diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c
index 28146e4..cb3b974 100644
--- a/drivers/gpu/drm/i915/i915_gem_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c
@@ -75,11 +75,10 @@
case ACTIVE_LIST:
seq_printf(m, "Active:\n");
lock = &dev_priv->mm.active_list_lock;
- spin_lock(lock);
head = &dev_priv->mm.active_list;
break;
case INACTIVE_LIST:
- seq_printf(m, "Inctive:\n");
+ seq_printf(m, "Inactive:\n");
head = &dev_priv->mm.inactive_list;
break;
case FLUSHING_LIST:
@@ -91,6 +90,8 @@
return 0;
}
+ if (lock)
+ spin_lock(lock);
list_for_each_entry(obj_priv, head, list)
{
struct drm_gem_object *obj = obj_priv->obj;
@@ -104,7 +105,10 @@
if (obj->name)
seq_printf(m, " (name: %d)", obj->name);
if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg);
+ seq_printf(m, " (fence: %d)", obj_priv->fence_reg);
+ if (obj_priv->gtt_space != NULL)
+ seq_printf(m, " (gtt_offset: %08x)", obj_priv->gtt_offset);
+
seq_printf(m, "\n");
}
@@ -323,6 +327,41 @@
return 0;
}
+static int i915_error_state(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_error_state *error;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->error_lock, flags);
+ if (!dev_priv->first_error) {
+ seq_printf(m, "no error state collected\n");
+ goto out;
+ }
+
+ error = dev_priv->first_error;
+
+ seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
+ error->time.tv_usec);
+ seq_printf(m, "EIR: 0x%08x\n", error->eir);
+ seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+ seq_printf(m, " INSTPM: 0x%08x\n", error->instpm);
+ seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir);
+ seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr);
+ seq_printf(m, " INSTDONE: 0x%08x\n", error->instdone);
+ seq_printf(m, " ACTHD: 0x%08x\n", error->acthd);
+ if (IS_I965G(dev)) {
+ seq_printf(m, " INSTPS: 0x%08x\n", error->instps);
+ seq_printf(m, " INSTDONE1: 0x%08x\n", error->instdone1);
+ }
+
+out:
+ spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+ return 0;
+}
static struct drm_info_list i915_gem_debugfs_list[] = {
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
@@ -336,6 +375,7 @@
{"i915_ringbuffer_data", i915_ringbuffer_data, 0},
{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
{"i915_batchbuffers", i915_batchbuffer_info, 0},
+ {"i915_error_state", i915_error_state, 0},
};
#define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 5c1ceec..a2d527b 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -114,11 +114,13 @@
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
if (mchbar_addr &&
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
ret = 0;
goto out_put;
}
+#endif
/* Get some space for it */
ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
@@ -519,6 +521,12 @@
goto err;
}
+ /* If we've changed tiling, GTT-mappings of the object
+ * need to re-fault to ensure that the correct fence register
+ * setup is in place.
+ */
+ i915_gem_release_mmap(obj);
+
obj_priv->tiling_mode = args->tiling_mode;
obj_priv->stride = args->stride;
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b86b7b7..7ebc84c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -26,6 +26,7 @@
*
*/
+#include <linux/sysrq.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
@@ -41,9 +42,10 @@
* we leave them always unmasked in IMR and then control enabling them through
* PIPESTAT alone.
*/
-#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \
+ I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
/** Interrupts that we mask and unmask at runtime. */
#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
@@ -188,7 +190,7 @@
low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
if (!i915_pipe_enabled(dev, pipe)) {
- DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+ DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
@@ -217,7 +219,7 @@
int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
if (!i915_pipe_enabled(dev, pipe)) {
- DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
+ DRM_DEBUG("trying to get vblank count for disabled pipe %d\n", pipe);
return 0;
}
@@ -232,7 +234,17 @@
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ if (mode_config->num_connector) {
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->hot_plug)
+ (*intel_output->hot_plug) (intel_output);
+ }
+ }
/* Just fire off a uevent and let userspace tell us what to do */
drm_sysfs_hotplug_event(dev);
}
@@ -278,6 +290,201 @@
return ret;
}
+/**
+ * i915_error_work_func - do process context error handling work
+ * @work: work struct
+ *
+ * Fire an error uevent so userspace can see that a hang or error
+ * was detected.
+ */
+static void i915_error_work_func(struct work_struct *work)
+{
+ drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+ error_work);
+ struct drm_device *dev = dev_priv->dev;
+ char *event_string = "ERROR=1";
+ char *envp[] = { event_string, NULL };
+
+ DRM_DEBUG("generating error event\n");
+
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * i915_capture_error_state - capture an error record for later analysis
+ * @dev: drm device
+ *
+ * Should be called when an error is detected (either a hang or an error
+ * interrupt) to capture error state from the time of the error. Fills
+ * out a structure which becomes available in debugfs for user level tools
+ * to pick up.
+ */
+static void i915_capture_error_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_error_state *error;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev_priv->error_lock, flags);
+ if (dev_priv->first_error)
+ goto out;
+
+ error = kmalloc(sizeof(*error), GFP_ATOMIC);
+ if (!error) {
+ DRM_DEBUG("out ot memory, not capturing error state\n");
+ goto out;
+ }
+
+ error->eir = I915_READ(EIR);
+ error->pgtbl_er = I915_READ(PGTBL_ER);
+ error->pipeastat = I915_READ(PIPEASTAT);
+ error->pipebstat = I915_READ(PIPEBSTAT);
+ error->instpm = I915_READ(INSTPM);
+ if (!IS_I965G(dev)) {
+ error->ipeir = I915_READ(IPEIR);
+ error->ipehr = I915_READ(IPEHR);
+ error->instdone = I915_READ(INSTDONE);
+ error->acthd = I915_READ(ACTHD);
+ } else {
+ error->ipeir = I915_READ(IPEIR_I965);
+ error->ipehr = I915_READ(IPEHR_I965);
+ error->instdone = I915_READ(INSTDONE_I965);
+ error->instps = I915_READ(INSTPS);
+ error->instdone1 = I915_READ(INSTDONE1);
+ error->acthd = I915_READ(ACTHD_I965);
+ }
+
+ do_gettimeofday(&error->time);
+
+ dev_priv->first_error = error;
+
+out:
+ spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+}
+
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog. Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs. Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+static void i915_handle_error(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 eir = I915_READ(EIR);
+ u32 pipea_stats = I915_READ(PIPEASTAT);
+ u32 pipeb_stats = I915_READ(PIPEBSTAT);
+
+ i915_capture_error_state(dev);
+
+ printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+ eir);
+
+ if (IS_G4X(dev)) {
+ if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ if (eir & GM45_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ }
+
+ if (IS_I9XX(dev)) {
+ if (eir & I915_ERROR_PAGE_TABLE) {
+ u32 pgtbl_err = I915_READ(PGTBL_ER);
+ printk(KERN_ERR "page table error\n");
+ printk(KERN_ERR " PGTBL_ER: 0x%08x\n",
+ pgtbl_err);
+ I915_WRITE(PGTBL_ER, pgtbl_err);
+ (void)I915_READ(PGTBL_ER);
+ }
+ }
+
+ if (eir & I915_ERROR_MEMORY_REFRESH) {
+ printk(KERN_ERR "memory refresh error\n");
+ printk(KERN_ERR "PIPEASTAT: 0x%08x\n",
+ pipea_stats);
+ printk(KERN_ERR "PIPEBSTAT: 0x%08x\n",
+ pipeb_stats);
+ /* pipestat has already been acked */
+ }
+ if (eir & I915_ERROR_INSTRUCTION) {
+ printk(KERN_ERR "instruction error\n");
+ printk(KERN_ERR " INSTPM: 0x%08x\n",
+ I915_READ(INSTPM));
+ if (!IS_I965G(dev)) {
+ u32 ipeir = I915_READ(IPEIR);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD));
+ I915_WRITE(IPEIR, ipeir);
+ (void)I915_READ(IPEIR);
+ } else {
+ u32 ipeir = I915_READ(IPEIR_I965);
+
+ printk(KERN_ERR " IPEIR: 0x%08x\n",
+ I915_READ(IPEIR_I965));
+ printk(KERN_ERR " IPEHR: 0x%08x\n",
+ I915_READ(IPEHR_I965));
+ printk(KERN_ERR " INSTDONE: 0x%08x\n",
+ I915_READ(INSTDONE_I965));
+ printk(KERN_ERR " INSTPS: 0x%08x\n",
+ I915_READ(INSTPS));
+ printk(KERN_ERR " INSTDONE1: 0x%08x\n",
+ I915_READ(INSTDONE1));
+ printk(KERN_ERR " ACTHD: 0x%08x\n",
+ I915_READ(ACTHD_I965));
+ I915_WRITE(IPEIR_I965, ipeir);
+ (void)I915_READ(IPEIR_I965);
+ }
+ }
+
+ I915_WRITE(EIR, eir);
+ (void)I915_READ(EIR);
+ eir = I915_READ(EIR);
+ if (eir) {
+ /*
+ * some errors might have become stuck,
+ * mask them.
+ */
+ DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+ I915_WRITE(EMR, I915_READ(EMR) | eir);
+ I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+ }
+
+ queue_work(dev_priv->wq, &dev_priv->error_work);
+}
+
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -319,15 +526,22 @@
pipea_stats = I915_READ(PIPEASTAT);
pipeb_stats = I915_READ(PIPEBSTAT);
+ if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
+ i915_handle_error(dev);
+
/*
* Clear the PIPE(A|B)STAT regs before the IIR
*/
if (pipea_stats & 0x8000ffff) {
+ if (pipea_stats & PIPE_FIFO_UNDERRUN_STATUS)
+ DRM_DEBUG("pipe a underrun\n");
I915_WRITE(PIPEASTAT, pipea_stats);
irq_received = 1;
}
if (pipeb_stats & 0x8000ffff) {
+ if (pipeb_stats & PIPE_FIFO_UNDERRUN_STATUS)
+ DRM_DEBUG("pipe b underrun\n");
I915_WRITE(PIPEBSTAT, pipeb_stats);
irq_received = 1;
}
@@ -346,7 +560,8 @@
DRM_DEBUG("hotplug event received, stat 0x%08x\n",
hotplug_status);
if (hotplug_status & dev_priv->hotplug_supported_mask)
- schedule_work(&dev_priv->hotplug_work);
+ queue_work(dev_priv->wq,
+ &dev_priv->hotplug_work);
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
@@ -699,6 +914,7 @@
atomic_set(&dev_priv->irq_received, 0);
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+ INIT_WORK(&dev_priv->error_work, i915_error_work_func);
if (IS_IGDNG(dev)) {
igdng_irq_preinstall(dev);
@@ -722,6 +938,7 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
+ u32 error_mask;
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
@@ -758,6 +975,21 @@
i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
}
+ /*
+ * Enable some error detection, note the instruction error mask
+ * bit is reserved, so we leave it masked.
+ */
+ if (IS_G4X(dev)) {
+ error_mask = ~(GM45_ERROR_PAGE_TABLE |
+ GM45_ERROR_MEM_PRIV |
+ GM45_ERROR_CP_PRIV |
+ I915_ERROR_MEMORY_REFRESH);
+ } else {
+ error_mask = ~(I915_ERROR_PAGE_TABLE |
+ I915_ERROR_MEMORY_REFRESH);
+ }
+ I915_WRITE(EMR, error_mask);
+
/* Disable pipe interrupt enables, clear pending pipe status */
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f6237a0..2955083 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -206,6 +206,7 @@
/*
* Instruction and interrupt control regs
*/
+#define PGTBL_ER 0x02024
#define PRB0_TAIL 0x02030
#define PRB0_HEAD 0x02034
#define PRB0_START 0x02038
@@ -226,11 +227,18 @@
#define PRB1_HEAD 0x02044 /* 915+ only */
#define PRB1_START 0x02048 /* 915+ only */
#define PRB1_CTL 0x0204c /* 915+ only */
+#define IPEIR_I965 0x02064
+#define IPEHR_I965 0x02068
+#define INSTDONE_I965 0x0206c
+#define INSTPS 0x02070 /* 965+ only */
+#define INSTDONE1 0x0207c /* 965+ only */
#define ACTHD_I965 0x02074
#define HWS_PGA 0x02080
#define HWS_ADDRESS_MASK 0xfffff000
#define HWS_START_ADDRESS_SHIFT 4
#define IPEIR 0x02088
+#define IPEHR 0x0208c
+#define INSTDONE 0x02090
#define NOPID 0x02094
#define HWSTAM 0x02098
#define SCPD0 0x0209c /* 915+ only */
@@ -258,10 +266,22 @@
#define EIR 0x020b0
#define EMR 0x020b4
#define ESR 0x020b8
+#define GM45_ERROR_PAGE_TABLE (1<<5)
+#define GM45_ERROR_MEM_PRIV (1<<4)
+#define I915_ERROR_PAGE_TABLE (1<<4)
+#define GM45_ERROR_CP_PRIV (1<<3)
+#define I915_ERROR_MEMORY_REFRESH (1<<1)
+#define I915_ERROR_INSTRUCTION (1<<0)
#define INSTPM 0x020c0
#define ACTHD 0x020c8
#define FW_BLC 0x020d8
+#define FW_BLC2 0x020dc
#define FW_BLC_SELF 0x020e0 /* 915+ only */
+#define FW_BLC_SELF_EN (1<<15)
+#define MM_BURST_LENGTH 0x00700000
+#define MM_FIFO_WATERMARK 0x0001F000
+#define LM_BURST_LENGTH 0x00000700
+#define LM_FIFO_WATERMARK 0x0000001F
#define MI_ARB_STATE 0x020e4 /* 915+ only */
#define CACHE_MODE_0 0x02120 /* 915+ only */
#define CM0_MASK_SHIFT 16
@@ -569,6 +589,23 @@
#define C0DRB3 0x10206
#define C1DRB3 0x10606
+/* Clocking configuration register */
+#define CLKCFG 0x10c00
+#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */
+#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */
+#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */
+#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */
+#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */
+#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */
+/* Note, below two are guess */
+#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */
+#define CLKCFG_FSB_MASK (7 << 0)
+#define CLKCFG_MEM_533 (1 << 4)
+#define CLKCFG_MEM_667 (2 << 4)
+#define CLKCFG_MEM_800 (3 << 4)
+#define CLKCFG_MEM_MASK (7 << 4)
+
/** GM965 GM45 render standby register */
#define MCHBAR_RENDER_STANDBY 0x111B8
@@ -834,9 +871,25 @@
#define HORIZ_INTERP_MASK (3 << 6)
#define HORIZ_AUTO_SCALE (1 << 5)
#define PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define PFIT_FILTER_FUZZY (0 << 24)
+#define PFIT_SCALING_AUTO (0 << 26)
+#define PFIT_SCALING_PROGRAMMED (1 << 26)
+#define PFIT_SCALING_PILLAR (2 << 26)
+#define PFIT_SCALING_LETTER (3 << 26)
#define PFIT_PGM_RATIOS 0x61234
#define PFIT_VERT_SCALE_MASK 0xfff00000
#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+/* Pre-965 */
+#define PFIT_VERT_SCALE_SHIFT 20
+#define PFIT_VERT_SCALE_MASK 0xfff00000
+#define PFIT_HORIZ_SCALE_SHIFT 4
+#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+/* 965+ */
+#define PFIT_VERT_SCALE_SHIFT_965 16
+#define PFIT_VERT_SCALE_MASK_965 0x1fff0000
+#define PFIT_HORIZ_SCALE_SHIFT_965 0
+#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff
+
#define PFIT_AUTO_RATIOS 0x61238
/* Backlight control */
@@ -1342,6 +1395,7 @@
#define TV_V_CHROMA_42 0x684a8
/* Display Port */
+#define DP_A 0x64000 /* eDP */
#define DP_B 0x64100
#define DP_C 0x64200
#define DP_D 0x64300
@@ -1384,13 +1438,22 @@
/* Mystic DPCD version 1.1 special mode */
#define DP_ENHANCED_FRAMING (1 << 18)
+/* eDP */
+#define DP_PLL_FREQ_270MHZ (0 << 16)
+#define DP_PLL_FREQ_160MHZ (1 << 16)
+#define DP_PLL_FREQ_MASK (3 << 16)
+
/** locked once port is enabled */
#define DP_PORT_REVERSAL (1 << 15)
+/* eDP */
+#define DP_PLL_ENABLE (1 << 14)
+
/** sends the clock on lane 15 of the PEG for debug */
#define DP_CLOCK_OUTPUT_ENABLE (1 << 13)
#define DP_SCRAMBLING_DISABLE (1 << 12)
+#define DP_SCRAMBLING_DISABLE_IGDNG (1 << 7)
/** limit RGB values to avoid confusing TVs */
#define DP_COLOR_RANGE_16_235 (1 << 8)
@@ -1410,6 +1473,13 @@
* is 20 bytes in each direction, hence the 5 fixed
* data registers
*/
+#define DPA_AUX_CH_CTL 0x64010
+#define DPA_AUX_CH_DATA1 0x64014
+#define DPA_AUX_CH_DATA2 0x64018
+#define DPA_AUX_CH_DATA3 0x6401c
+#define DPA_AUX_CH_DATA4 0x64020
+#define DPA_AUX_CH_DATA5 0x64024
+
#define DPB_AUX_CH_CTL 0x64110
#define DPB_AUX_CH_DATA1 0x64114
#define DPB_AUX_CH_DATA2 0x64118
@@ -1552,6 +1622,34 @@
#define DSPARB_CSTART_SHIFT 7
#define DSPARB_BSTART_MASK (0x7f)
#define DSPARB_BSTART_SHIFT 0
+#define DSPARB_BEND_SHIFT 9 /* on 855 */
+#define DSPARB_AEND_SHIFT 0
+
+#define DSPFW1 0x70034
+#define DSPFW2 0x70038
+#define DSPFW3 0x7003c
+#define IGD_SELF_REFRESH_EN (1<<30)
+
+/* FIFO watermark sizes etc */
+#define I915_FIFO_LINE_SIZE 64
+#define I830_FIFO_LINE_SIZE 32
+#define I945_FIFO_SIZE 127 /* 945 & 965 */
+#define I915_FIFO_SIZE 95
+#define I855GM_FIFO_SIZE 127 /* In cachelines */
+#define I830_FIFO_SIZE 95
+#define I915_MAX_WM 0x3f
+
+#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */
+#define IGD_FIFO_LINE_SIZE 64
+#define IGD_MAX_WM 0x1ff
+#define IGD_DFT_WM 0x3f
+#define IGD_DFT_HPLLOFF_WM 0
+#define IGD_GUARD_WM 10
+#define IGD_CURSOR_FIFO 64
+#define IGD_CURSOR_MAX_WM 0x3f
+#define IGD_CURSOR_DFT_WM 0
+#define IGD_CURSOR_GUARD_WM 5
+
/*
* The two pipe frame counter registers are not synchronized, so
* reading a stable value is somewhat tricky. The following code
@@ -1767,6 +1865,8 @@
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PFA_WIN_SZ 0x68074
+#define PFB_WIN_SZ 0x68874
/* legacy palette */
#define LGC_PALETTE_A 0x4a000
@@ -2127,4 +2227,28 @@
#define PCH_PP_OFF_DELAYS 0xc720c
#define PCH_PP_DIVISOR 0xc7210
+#define PCH_DP_B 0xe4100
+#define PCH_DPB_AUX_CH_CTL 0xe4110
+#define PCH_DPB_AUX_CH_DATA1 0xe4114
+#define PCH_DPB_AUX_CH_DATA2 0xe4118
+#define PCH_DPB_AUX_CH_DATA3 0xe411c
+#define PCH_DPB_AUX_CH_DATA4 0xe4120
+#define PCH_DPB_AUX_CH_DATA5 0xe4124
+
+#define PCH_DP_C 0xe4200
+#define PCH_DPC_AUX_CH_CTL 0xe4210
+#define PCH_DPC_AUX_CH_DATA1 0xe4214
+#define PCH_DPC_AUX_CH_DATA2 0xe4218
+#define PCH_DPC_AUX_CH_DATA3 0xe421c
+#define PCH_DPC_AUX_CH_DATA4 0xe4220
+#define PCH_DPC_AUX_CH_DATA5 0xe4224
+
+#define PCH_DP_D 0xe4300
+#define PCH_DPD_AUX_CH_CTL 0xe4310
+#define PCH_DPD_AUX_CH_DATA1 0xe4314
+#define PCH_DPD_AUX_CH_DATA2 0xe4318
+#define PCH_DPD_AUX_CH_DATA3 0xe431c
+#define PCH_DPD_AUX_CH_DATA4 0xe4320
+#define PCH_DPD_AUX_CH_DATA5 0xe4324
+
#endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a98e283..1d04e19 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -222,23 +222,12 @@
I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
}
-int i915_save_state(struct drm_device *dev)
+static void i915_save_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
- pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-
- /* Hardware status page */
- dev_priv->saveHWS = I915_READ(HWS_PGA);
-
- /* Display arbitration control */
- dev_priv->saveDSPARB = I915_READ(DSPARB);
-
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ return;
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
@@ -294,116 +283,14 @@
}
i915_save_palette(dev, PIPE_B);
dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
-
- /* Cursor state */
- dev_priv->saveCURACNTR = I915_READ(CURACNTR);
- dev_priv->saveCURAPOS = I915_READ(CURAPOS);
- dev_priv->saveCURABASE = I915_READ(CURABASE);
- dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
- dev_priv->saveCURBPOS = I915_READ(CURBPOS);
- dev_priv->saveCURBBASE = I915_READ(CURBBASE);
- if (!IS_I9XX(dev))
- dev_priv->saveCURSIZE = I915_READ(CURSIZE);
-
- /* CRT state */
- dev_priv->saveADPA = I915_READ(ADPA);
-
- /* LVDS state */
- dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
- if (IS_I965G(dev))
- dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
- dev_priv->saveLVDS = I915_READ(LVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
- dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
- dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
- dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
- dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
-
- /* FIXME: save TV & SDVO state */
-
- /* FBC state */
- dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
- dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
- dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
- dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
-
- /* Interrupt state */
- dev_priv->saveIIR = I915_READ(IIR);
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
-
- /* VGA state */
- dev_priv->saveVGA0 = I915_READ(VGA0);
- dev_priv->saveVGA1 = I915_READ(VGA1);
- dev_priv->saveVGA_PD = I915_READ(VGA_PD);
- dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
-
- /* Clock gating state */
- dev_priv->saveD_STATE = I915_READ(D_STATE);
- dev_priv->saveCG_2D_DIS = I915_READ(CG_2D_DIS);
-
- /* Cache mode state */
- dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
-
- /* Memory Arbitration state */
- dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
-
- /* Scratch space */
- for (i = 0; i < 16; i++) {
- dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
- dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
- }
- for (i = 0; i < 3; i++)
- dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
-
- /* Fences */
- if (IS_I965G(dev)) {
- for (i = 0; i < 16; i++)
- dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
- } else {
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
- }
- i915_save_vga(dev);
-
- return 0;
+ return;
}
-
-int i915_restore_state(struct drm_device *dev)
+static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
- pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
-
- /* Hardware status page */
- I915_WRITE(HWS_PGA, dev_priv->saveHWS);
-
- /* Display arbitration */
- I915_WRITE(DSPARB, dev_priv->saveDSPARB);
-
- /* Fences */
- if (IS_I965G(dev)) {
- for (i = 0; i < 16; i++)
- I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
- } else {
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
- }
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ return;
/* Pipe & plane A info */
/* Prime the clock */
@@ -490,6 +377,166 @@
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
+ return;
+}
+int i915_save_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+ /* Display arbitration control */
+ dev_priv->saveDSPARB = I915_READ(DSPARB);
+
+ /* This is only meaningful in non-KMS mode */
+ /* Don't save them in KMS mode */
+ i915_save_modeset_reg(dev);
+ /* Cursor state */
+ dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+ dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+ dev_priv->saveCURABASE = I915_READ(CURABASE);
+ dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+ dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+ dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+ if (!IS_I9XX(dev))
+ dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
+ /* CRT state */
+ dev_priv->saveADPA = I915_READ(ADPA);
+
+ /* LVDS state */
+ dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ if (IS_I965G(dev))
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ dev_priv->saveLVDS = I915_READ(LVDS);
+ if (!IS_I830(dev) && !IS_845G(dev))
+ dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
+ dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ dev_priv->saveDP_B = I915_READ(DP_B);
+ dev_priv->saveDP_C = I915_READ(DP_C);
+ dev_priv->saveDP_D = I915_READ(DP_D);
+ dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+ dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+ dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+ dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+ dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+ dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+ dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+ dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+ }
+ /* FIXME: save TV & SDVO state */
+
+ /* FBC state */
+ dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+ dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+ dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+ dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+
+ /* Interrupt state */
+ dev_priv->saveIIR = I915_READ(IIR);
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+
+ /* VGA state */
+ dev_priv->saveVGA0 = I915_READ(VGA0);
+ dev_priv->saveVGA1 = I915_READ(VGA1);
+ dev_priv->saveVGA_PD = I915_READ(VGA_PD);
+ dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+
+ /* Clock gating state */
+ dev_priv->saveD_STATE = I915_READ(D_STATE);
+ dev_priv->saveCG_2D_DIS = I915_READ(CG_2D_DIS);
+
+ /* Cache mode state */
+ dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
+
+ /* Memory Arbitration state */
+ dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
+
+ /* Scratch space */
+ for (i = 0; i < 16; i++) {
+ dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
+ dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
+ }
+ for (i = 0; i < 3; i++)
+ dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+ } else {
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ }
+ i915_save_vga(dev);
+
+ return 0;
+}
+
+int i915_restore_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
+ /* Display arbitration */
+ I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ }
+
+ /* Display port ratios (must be done before clock is set) */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+ I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+ I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+ I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+ I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+ I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+ I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+ I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+ }
+ /* This is only meaningful in non-KMS mode */
+ /* Don't restore them in KMS mode */
+ i915_restore_modeset_reg(dev);
/* Cursor state */
I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
@@ -518,6 +565,12 @@
I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(DP_B, dev_priv->saveDP_B);
+ I915_WRITE(DP_C, dev_priv->saveDP_C);
+ I915_WRITE(DP_D, dev_priv->saveDP_D);
+ }
/* FIXME: restore TV & SDVO state */
/* FBC info */
@@ -545,7 +598,7 @@
for (i = 0; i < 16; i++) {
I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
- I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]);
+ I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i]);
}
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index cdd126d..300aee3 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -99,9 +99,11 @@
{
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
+ struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
struct bdb_lvds_lfp_data_entry *entry;
struct lvds_dvo_timing *dvo_timing;
struct drm_display_mode *panel_fixed_mode;
+ int lfp_data_size, dvo_timing_offset;
/* Defaults if we can't find VBT info */
dev_priv->lvds_dither = 0;
@@ -119,10 +121,27 @@
if (!lvds_lfp_data)
return;
+ lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+ if (!lvds_lfp_data_ptrs)
+ return;
+
dev_priv->lvds_vbt = 1;
- entry = &lvds_lfp_data->data[lvds_options->panel_type];
- dvo_timing = &entry->dvo_timing;
+ lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+ lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+ entry = (struct bdb_lvds_lfp_data_entry *)
+ ((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
+ lvds_options->panel_type));
+ dvo_timing_offset = lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
+ lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
+
+ /*
+ * the size of fp_timing varies on the different platform.
+ * So calculate the DVO timing relative offset in LVDS data
+ * entry to get the DVO timing entry
+ */
+ dvo_timing = (struct lvds_dvo_timing *)
+ ((unsigned char *)entry + dvo_timing_offset);
panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
@@ -185,10 +204,12 @@
dev_priv->lvds_use_ssc = general->enable_ssc;
if (dev_priv->lvds_use_ssc) {
- if (IS_I855(dev_priv->dev))
- dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
- else
- dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+ if (IS_I85X(dev_priv->dev))
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 66 : 48;
+ else
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 100 : 96;
}
}
}
@@ -275,6 +296,25 @@
}
return;
}
+
+static void
+parse_driver_features(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct bdb_driver_features *driver;
+
+ /* set default for chips without eDP */
+ if (!SUPPORTS_EDP(dev)) {
+ dev_priv->edp_support = 0;
+ return;
+ }
+
+ driver = find_section(bdb, BDB_DRIVER_FEATURES);
+ if (driver && driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+ dev_priv->edp_support = 1;
+}
+
/**
* intel_init_bios - initialize VBIOS settings & find VBT
* @dev: DRM device
@@ -325,6 +365,8 @@
parse_lfp_panel_data(dev_priv, bdb);
parse_sdvo_panel_data(dev_priv, bdb);
parse_sdvo_device_mapping(dev_priv, bdb);
+ parse_driver_features(dev_priv, bdb);
+
pci_unmap_rom(pdev, bios);
return 0;
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index fe72e1c..0f8e5f6 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -381,6 +381,51 @@
} __attribute__((packed));
+#define BDB_DRIVER_FEATURE_NO_LVDS 0
+#define BDB_DRIVER_FEATURE_INT_LVDS 1
+#define BDB_DRIVER_FEATURE_SDVO_LVDS 2
+#define BDB_DRIVER_FEATURE_EDP 3
+
+struct bdb_driver_features {
+ u8 boot_dev_algorithm:1;
+ u8 block_display_switch:1;
+ u8 allow_display_switch:1;
+ u8 hotplug_dvo:1;
+ u8 dual_view_zoom:1;
+ u8 int15h_hook:1;
+ u8 sprite_in_clone:1;
+ u8 primary_lfp_id:1;
+
+ u16 boot_mode_x;
+ u16 boot_mode_y;
+ u8 boot_mode_bpp;
+ u8 boot_mode_refresh;
+
+ u16 enable_lfp_primary:1;
+ u16 selective_mode_pruning:1;
+ u16 dual_frequency:1;
+ u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+ u16 nt_clone_support:1;
+ u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+ u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+ u16 cui_aspect_scaling:1;
+ u16 preserve_aspect_ratio:1;
+ u16 sdvo_device_power_down:1;
+ u16 crt_hotplug:1;
+ u16 lvds_config:2;
+ u16 tv_hotplug:1;
+ u16 hdmi_config:2;
+
+ u8 static_display:1;
+ u8 reserved2:7;
+ u16 legacy_crt_max_x;
+ u16 legacy_crt_max_y;
+ u8 legacy_crt_max_refresh;
+
+ u8 hdmi_termination;
+ u8 custom_vbt_version;
+} __attribute__((packed));
+
bool intel_init_bios(struct drm_device *dev);
/*
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 6de97fc..4cf8e2e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -46,7 +46,7 @@
temp = I915_READ(reg);
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
- temp |= ADPA_DAC_ENABLE;
+ temp &= ~ADPA_DAC_ENABLE;
switch(mode) {
case DRM_MODE_DPMS_ON:
@@ -156,6 +156,9 @@
temp = adpa = I915_READ(PCH_ADPA);
+ adpa &= ~ADPA_DAC_ENABLE;
+ I915_WRITE(PCH_ADPA, adpa);
+
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
@@ -169,13 +172,14 @@
DRM_DEBUG("pch crt adpa 0x%x", adpa);
I915_WRITE(PCH_ADPA, adpa);
- /* This might not be needed as not specified in spec...*/
- udelay(1000);
+ while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0)
+ ;
/* Check the status to see if both blue and green are on now */
adpa = I915_READ(PCH_ADPA);
- if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) ==
- ADPA_CRT_HOTPLUG_MONITOR_COLOR)
+ adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
+ if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
+ (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
ret = true;
else
ret = false;
@@ -428,8 +432,34 @@
static int intel_crt_get_modes(struct drm_connector *connector)
{
+ int ret;
struct intel_output *intel_output = to_intel_output(connector);
- return intel_ddc_get_modes(intel_output);
+ struct i2c_adapter *ddcbus;
+ struct drm_device *dev = connector->dev;
+
+
+ ret = intel_ddc_get_modes(intel_output);
+ if (ret || !IS_G4X(dev))
+ goto end;
+
+ ddcbus = intel_output->ddc_bus;
+ /* Try to probe digital port for output in DVI-I -> VGA mode. */
+ intel_output->ddc_bus =
+ intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
+
+ if (!intel_output->ddc_bus) {
+ intel_output->ddc_bus = ddcbus;
+ dev_printk(KERN_ERR, &connector->dev->pdev->dev,
+ "DDC bus registration failed for CRTDDC_D.\n");
+ goto end;
+ }
+ /* Try to get modes by GPIOD port */
+ ret = intel_ddc_get_modes(intel_output);
+ intel_i2c_destroy(ddcbus);
+
+end:
+ return ret;
+
}
static int intel_crt_set_property(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e1c781..d6fce21 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -25,14 +25,19 @@
*/
#include <linux/i2c.h>
+#include <linux/kernel.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "intel_dp.h"
#include "drm_crtc_helper.h"
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+static void intel_update_watermarks(struct drm_device *dev);
typedef struct {
/* given values */
@@ -85,7 +90,7 @@
#define I8XX_P2_SLOW 4
#define I8XX_P2_FAST 2
#define I8XX_P2_LVDS_SLOW 14
-#define I8XX_P2_LVDS_FAST 14 /* No fast option */
+#define I8XX_P2_LVDS_FAST 7
#define I8XX_P2_SLOW_LIMIT 165000
#define I9XX_DOT_MIN 20000
@@ -127,19 +132,6 @@
#define I9XX_P2_LVDS_FAST 7
#define I9XX_P2_LVDS_SLOW_LIMIT 112000
-#define INTEL_LIMIT_I8XX_DVO_DAC 0
-#define INTEL_LIMIT_I8XX_LVDS 1
-#define INTEL_LIMIT_I9XX_SDVO_DAC 2
-#define INTEL_LIMIT_I9XX_LVDS 3
-#define INTEL_LIMIT_G4X_SDVO 4
-#define INTEL_LIMIT_G4X_HDMI_DAC 5
-#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6
-#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7
-#define INTEL_LIMIT_IGD_SDVO_DAC 8
-#define INTEL_LIMIT_IGD_LVDS 9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC 10
-#define INTEL_LIMIT_IGDNG_LVDS 11
-
/*The parameter is for SDVO on G4x platform*/
#define G4X_DOT_SDVO_MIN 25000
#define G4X_DOT_SDVO_MAX 270000
@@ -218,6 +210,25 @@
#define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
#define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN 161670
+#define G4X_DOT_DISPLAY_PORT_MAX 227000
+#define G4X_N_DISPLAY_PORT_MIN 1
+#define G4X_N_DISPLAY_PORT_MAX 2
+#define G4X_M_DISPLAY_PORT_MIN 97
+#define G4X_M_DISPLAY_PORT_MAX 108
+#define G4X_M1_DISPLAY_PORT_MIN 0x10
+#define G4X_M1_DISPLAY_PORT_MAX 0x12
+#define G4X_M2_DISPLAY_PORT_MIN 0x05
+#define G4X_M2_DISPLAY_PORT_MAX 0x06
+#define G4X_P_DISPLAY_PORT_MIN 10
+#define G4X_P_DISPLAY_PORT_MAX 20
+#define G4X_P1_DISPLAY_PORT_MIN 1
+#define G4X_P1_DISPLAY_PORT_MAX 2
+#define G4X_P2_DISPLAY_PORT_SLOW 10
+#define G4X_P2_DISPLAY_PORT_FAST 10
+#define G4X_P2_DISPLAY_PORT_LIMIT 0
+
/* IGDNG */
/* as we calculate clock using (register_value + 2) for
N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,8 +267,14 @@
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
-static const intel_limit_t intel_limits[] = {
- { /* INTEL_LIMIT_I8XX_DVO_DAC */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
+static bool
+intel_find_pll_igdng_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
.n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
@@ -269,8 +286,9 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I8XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
.n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
@@ -282,8 +300,9 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_i9xx_sdvo = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
.n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
@@ -295,8 +314,9 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I9XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
.n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
@@ -311,9 +331,10 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- },
+};
+
/* below parameter and function is for G4X Chipset Family*/
- { /* INTEL_LIMIT_G4X_SDVO */
+static const intel_limit_t intel_limits_g4x_sdvo = {
.dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX },
.vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
.n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX },
@@ -327,8 +348,9 @@
.p2_fast = G4X_P2_SDVO_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_HDMI_DAC */
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
.dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX },
.vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
.n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX },
@@ -342,8 +364,9 @@
.p2_fast = G4X_P2_HDMI_DAC_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
.dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
.max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
.vco = { .min = G4X_VCO_MIN,
@@ -365,8 +388,9 @@
.p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
.dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
.max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
.vco = { .min = G4X_VCO_MIN,
@@ -388,8 +412,32 @@
.p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGD_SDVO */
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+ .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+ .max = G4X_DOT_DISPLAY_PORT_MAX },
+ .vco = { .min = G4X_VCO_MIN,
+ .max = G4X_VCO_MAX},
+ .n = { .min = G4X_N_DISPLAY_PORT_MIN,
+ .max = G4X_N_DISPLAY_PORT_MAX },
+ .m = { .min = G4X_M_DISPLAY_PORT_MIN,
+ .max = G4X_M_DISPLAY_PORT_MAX },
+ .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN,
+ .max = G4X_M1_DISPLAY_PORT_MAX },
+ .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN,
+ .max = G4X_M2_DISPLAY_PORT_MAX },
+ .p = { .min = G4X_P_DISPLAY_PORT_MIN,
+ .max = G4X_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN,
+ .max = G4X_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_igd_sdvo = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
.n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
@@ -401,8 +449,9 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGD_LVDS */
+};
+
+static const intel_limit_t intel_limits_igd_lvds = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
.n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
@@ -415,8 +464,9 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_igdng_sdvo = {
.dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
.vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
.n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
@@ -429,8 +479,9 @@
.p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
.p2_fast = IGDNG_P2_SDVO_DAC_FAST },
.find_pll = intel_igdng_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGDNG_LVDS */
+};
+
+static const intel_limit_t intel_limits_igdng_lvds = {
.dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
.vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
.n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
@@ -443,16 +494,15 @@
.p2_slow = IGDNG_P2_LVDS_SLOW,
.p2_fast = IGDNG_P2_LVDS_FAST },
.find_pll = intel_igdng_find_best_PLL,
- },
};
static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
{
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+ limit = &intel_limits_igdng_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+ limit = &intel_limits_igdng_sdvo;
return limit;
}
@@ -467,19 +517,19 @@
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
/* LVDS with dual channel */
- limit = &intel_limits
- [INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS];
+ limit = &intel_limits_g4x_dual_channel_lvds;
else
/* LVDS with dual channel */
- limit = &intel_limits
- [INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS];
+ limit = &intel_limits_g4x_single_channel_lvds;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
- limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
+ limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
- limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+ limit = &intel_limits_g4x_sdvo;
+ } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ limit = &intel_limits_g4x_display_port;
} else /* The option is for other outputs */
- limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ limit = &intel_limits_i9xx_sdvo;
return limit;
}
@@ -495,19 +545,19 @@
limit = intel_g4x_limit(crtc);
} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+ limit = &intel_limits_i9xx_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ limit = &intel_limits_i9xx_sdvo;
} else if (IS_IGD(dev)) {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_IGD_LVDS];
+ limit = &intel_limits_igd_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC];
+ limit = &intel_limits_igd_sdvo;
} else {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+ limit = &intel_limits_i8xx_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+ limit = &intel_limits_i8xx_dvo;
}
return limit;
}
@@ -553,6 +603,23 @@
return false;
}
+struct drm_connector *
+intel_pipe_get_output (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry, *ret = NULL;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder &&
+ l_entry->encoder->crtc == crtc) {
+ ret = l_entry;
+ break;
+ }
+ }
+ return ret;
+}
+
#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
@@ -600,7 +667,7 @@
int err = target;
if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
- (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ (I915_READ(LVDS)) != 0) {
/*
* For LVDS, if the panel is on, just rely on its current
* settings for dual-channel. We haven't figured out how to
@@ -707,6 +774,30 @@
}
static bool
+intel_find_pll_igdng_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.n = 1;
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.m1 = 12;
+ clock.m2 = 9;
+ } else {
+ clock.n = 2;
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.m1 = 14;
+ clock.m2 = 8;
+ }
+ intel_clock(dev, refclk, &clock);
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
+static bool
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
{
@@ -718,6 +809,14 @@
int err_most = 47;
found = false;
+ /* eDP has only 2 clock choice, no n/m/p setting */
+ if (HAS_eDP)
+ return true;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ return intel_find_pll_igdng_dp(limit, crtc, target,
+ refclk, best_clock);
+
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
@@ -764,6 +863,32 @@
return found;
}
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 2;
+ clock.m1 = 23;
+ clock.m2 = 8;
+ } else {
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 1;
+ clock.m1 = 14;
+ clock.m2 = 2;
+ }
+ clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
+ clock.p = (clock.p1 * clock.p2);
+ clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
void
intel_wait_for_vblank(struct drm_device *dev)
{
@@ -927,13 +1052,97 @@
return 0;
}
+/* Disable the VGA plane that we never use */
+static void i915_disable_vga (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u8 sr1;
+ u32 vga_reg;
+
+ if (IS_IGDNG(dev))
+ vga_reg = CPU_VGACNTRL;
+ else
+ vga_reg = VGACNTRL;
+
+ if (I915_READ(vga_reg) & VGA_DISP_DISABLE)
+ return;
+
+ I915_WRITE8(VGA_SR_INDEX, 1);
+ sr1 = I915_READ8(VGA_SR_DATA);
+ I915_WRITE8(VGA_SR_DATA, sr1 | (1 << 5));
+ udelay(100);
+
+ I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+}
+
+static void igdng_disable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("\n");
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+}
+
+static void igdng_enable_pll_edp (struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl |= DP_PLL_ENABLE;
+ I915_WRITE(DP_A, dpa_ctl);
+ udelay(200);
+}
+
+
+static void igdng_set_pll_edp (struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ u32 temp;
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ /* workaround for 160Mhz:
+ 1) program 0x4600c bits 15:0 = 0x8124
+ 2) program 0x46010 bit 0 = 1
+ 3) program 0x46034 bit 24 = 1
+ 4) program 0x64000 bit 14 = 1
+ */
+ temp = I915_READ(0x4600c);
+ temp &= 0xffff0000;
+ I915_WRITE(0x4600c, temp | 0x8124);
+
+ temp = I915_READ(0x46010);
+ I915_WRITE(0x46010, temp | 1);
+
+ temp = I915_READ(0x46034);
+ I915_WRITE(0x46034, temp | (1 << 24));
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+ I915_WRITE(DP_A, dpa_ctl);
+
+ udelay(500);
+}
+
static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int plane = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
@@ -944,6 +1153,7 @@
int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+ int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
@@ -957,7 +1167,7 @@
int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
u32 temp;
- int tries = 5, j;
+ int tries = 5, j, n;
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -967,27 +1177,32 @@
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
DRM_DEBUG("crtc %d dpms on\n", pipe);
- /* enable PCH DPLL */
- temp = I915_READ(pch_dpll_reg);
- if ((temp & DPLL_VCO_ENABLE) == 0) {
- I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
- I915_READ(pch_dpll_reg);
- }
+ if (HAS_eDP) {
+ /* enable eDP PLL */
+ igdng_enable_pll_edp(crtc);
+ } else {
+ /* enable PCH DPLL */
+ temp = I915_READ(pch_dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
+ I915_READ(pch_dpll_reg);
+ }
- /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
- FDI_SEL_PCDCLK |
- FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
- I915_READ(fdi_rx_reg);
- udelay(200);
+ /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
+ FDI_SEL_PCDCLK |
+ FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+ I915_READ(fdi_rx_reg);
+ udelay(200);
- /* Enable CPU FDI TX PLL, always on for IGDNG */
- temp = I915_READ(fdi_tx_reg);
- if ((temp & FDI_TX_PLL_ENABLE) == 0) {
- I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
- I915_READ(fdi_tx_reg);
- udelay(100);
+ /* Enable CPU FDI TX PLL, always on for IGDNG */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+ I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
}
/* Enable CPU pipe */
@@ -1006,122 +1221,126 @@
I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
}
- /* enable CPU FDI TX and PCH FDI RX */
- temp = I915_READ(fdi_tx_reg);
- temp |= FDI_TX_ENABLE;
- temp |= FDI_DP_PORT_WIDTH_X4; /* default */
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_tx_reg, temp);
- I915_READ(fdi_tx_reg);
+ if (!HAS_eDP) {
+ /* enable CPU FDI TX and PCH FDI RX */
+ temp = I915_READ(fdi_tx_reg);
+ temp |= FDI_TX_ENABLE;
+ temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_tx_reg, temp);
+ I915_READ(fdi_tx_reg);
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
- I915_READ(fdi_rx_reg);
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
+ I915_READ(fdi_rx_reg);
- udelay(150);
+ udelay(150);
- /* Train FDI. */
- /* umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- temp = I915_READ(fdi_rx_imr_reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(fdi_rx_imr_reg, temp);
- I915_READ(fdi_rx_imr_reg);
- udelay(150);
+ /* Train FDI. */
+ /* umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ temp = I915_READ(fdi_rx_imr_reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(fdi_rx_imr_reg, temp);
+ I915_READ(fdi_rx_imr_reg);
+ udelay(150);
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if ((temp & FDI_RX_BIT_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_BIT_LOCK)
- break;
- udelay(200);
- }
- if (j != tries)
+ if ((temp & FDI_RX_BIT_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries)
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_BIT_LOCK);
+ else
+ DRM_DEBUG("train 1 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_BIT_LOCK);
- else
- DRM_DEBUG("train 1 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg,
- temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG("train 1 ok 2!\n");
- }
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_tx_reg, temp);
-
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(fdi_rx_reg, temp);
-
- udelay(150);
-
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
-
- if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
- for (j = 0; j < tries; j++) {
- temp = I915_READ(fdi_rx_iir_reg);
- DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK)
- break;
- udelay(200);
+ DRM_DEBUG("train 1 ok 2!\n");
}
- if (j != tries) {
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_tx_reg, temp);
+
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(fdi_rx_reg, temp);
+
+ udelay(150);
+
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+
+ if ((temp & FDI_RX_SYMBOL_LOCK) == 0) {
+ for (j = 0; j < tries; j++) {
+ temp = I915_READ(fdi_rx_iir_reg);
+ DRM_DEBUG("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK)
+ break;
+ udelay(200);
+ }
+ if (j != tries) {
+ I915_WRITE(fdi_rx_iir_reg,
+ temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG("train 2 ok 1!\n");
+ } else
+ DRM_DEBUG("train 2 fail\n");
+ } else {
I915_WRITE(fdi_rx_iir_reg,
temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 1!\n");
- } else
- DRM_DEBUG("train 2 fail\n");
- } else {
- I915_WRITE(fdi_rx_iir_reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG("train 2 ok 2!\n");
+ DRM_DEBUG("train 2 ok 2!\n");
+ }
+ DRM_DEBUG("train done\n");
+
+ /* set transcoder timing */
+ I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
+ I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
+ I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
+
+ I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
+ I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
+ I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
+
+ /* enable PCH transcoder */
+ temp = I915_READ(transconf_reg);
+ I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
+ I915_READ(transconf_reg);
+
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
+ ;
+
+ /* enable normal */
+
+ temp = I915_READ(fdi_tx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_TX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_tx_reg);
+
+ temp = I915_READ(fdi_rx_reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
+ FDI_RX_ENHANCE_FRAME_ENABLE);
+ I915_READ(fdi_rx_reg);
+
+ /* wait one idle pattern time */
+ udelay(100);
+
}
- DRM_DEBUG("train done\n");
-
- /* set transcoder timing */
- I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
- I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
- I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
-
- I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
- I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
- I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
-
- /* enable PCH transcoder */
- temp = I915_READ(transconf_reg);
- I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
- I915_READ(transconf_reg);
-
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0)
- ;
-
- /* enable normal */
-
- temp = I915_READ(fdi_tx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_TX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_tx_reg);
-
- temp = I915_READ(fdi_rx_reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- I915_WRITE(fdi_rx_reg, temp | FDI_LINK_TRAIN_NONE |
- FDI_RX_ENHANCE_FRAME_ENABLE);
- I915_READ(fdi_rx_reg);
-
- /* wait one idle pattern time */
- udelay(100);
intel_crtc_load_lut(crtc);
@@ -1129,8 +1348,7 @@
case DRM_MODE_DPMS_OFF:
DRM_DEBUG("crtc %d dpms off\n", pipe);
- /* Disable the VGA plane that we never use */
- I915_WRITE(CPU_VGACNTRL, VGA_DISP_DISABLE);
+ i915_disable_vga(dev);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
@@ -1146,17 +1364,23 @@
if ((temp & PIPEACONF_ENABLE) != 0) {
I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
I915_READ(pipeconf_reg);
+ n = 0;
/* wait for cpu pipe off, pipe state */
- while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
- ;
+ while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
+ n++;
+ if (n < 60) {
+ udelay(500);
+ continue;
+ } else {
+ DRM_DEBUG("pipe %d off delay\n", pipe);
+ break;
+ }
+ }
} else
DRM_DEBUG("crtc %d is disabled\n", pipe);
- /* IGDNG-A : disable cpu panel fitter ? */
- temp = I915_READ(pf_ctl_reg);
- if ((temp & PF_ENABLE) != 0) {
- I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
- I915_READ(pf_ctl_reg);
+ if (HAS_eDP) {
+ igdng_disable_pll_edp(crtc);
}
/* disable CPU FDI tx and PCH FDI rx */
@@ -1168,6 +1392,8 @@
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
I915_READ(fdi_rx_reg);
+ udelay(100);
+
/* still set train pattern 1 */
temp = I915_READ(fdi_tx_reg);
temp &= ~FDI_LINK_TRAIN_NONE;
@@ -1179,14 +1405,25 @@
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(fdi_rx_reg, temp);
+ udelay(100);
+
/* disable PCH transcoder */
temp = I915_READ(transconf_reg);
if ((temp & TRANS_ENABLE) != 0) {
I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
I915_READ(transconf_reg);
+ n = 0;
/* wait for PCH transcoder off, transcoder state */
- while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
- ;
+ while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
+ n++;
+ if (n < 60) {
+ udelay(500);
+ continue;
+ } else {
+ DRM_DEBUG("transcoder %d off delay\n", pipe);
+ break;
+ }
+ }
}
/* disable PCH DPLL */
@@ -1204,6 +1441,22 @@
I915_READ(fdi_rx_reg);
}
+ /* Disable CPU FDI TX PLL */
+ temp = I915_READ(fdi_tx_reg);
+ if ((temp & FDI_TX_PLL_ENABLE) != 0) {
+ I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
+ I915_READ(fdi_tx_reg);
+ udelay(100);
+ }
+
+ /* Disable PF */
+ temp = I915_READ(pf_ctl_reg);
+ if ((temp & PF_ENABLE) != 0) {
+ I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+ I915_READ(pf_ctl_reg);
+ }
+ I915_WRITE(pf_win_size, 0);
+
/* Wait for the clocks to turn off. */
udelay(150);
break;
@@ -1263,13 +1516,15 @@
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
+ intel_update_watermarks(dev);
break;
case DRM_MODE_DPMS_OFF:
+ intel_update_watermarks(dev);
/* Give the overlay scaler a chance to disable if it's on this pipe */
//intel_crtc_dpms_video(crtc, FALSE); TODO
/* Disable the VGA plane that we never use */
- I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+ i915_disable_vga(dev);
/* Disable display plane */
temp = I915_READ(dspcntr_reg);
@@ -1443,7 +1698,6 @@
return 0; /* Silence gcc warning */
}
-
/**
* Return the pipe currently connected to the panel fitter,
* or -1 if the panel fitter is not present or not in use
@@ -1502,7 +1756,7 @@
temp = (u64) DATA_N * pixel_clock;
temp = div_u64(temp, link_clock);
- m_n->gmch_m = (temp * bytes_per_pixel) / nlanes;
+ m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
m_n->gmch_n = DATA_N;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
@@ -1513,6 +1767,464 @@
}
+struct intel_watermark_params {
+ unsigned long fifo_size;
+ unsigned long max_wm;
+ unsigned long default_wm;
+ unsigned long guard_size;
+ unsigned long cacheline_size;
+};
+
+/* IGD has different values for various configs */
+static struct intel_watermark_params igd_display_wm = {
+ IGD_DISPLAY_FIFO,
+ IGD_MAX_WM,
+ IGD_DFT_WM,
+ IGD_GUARD_WM,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_display_hplloff_wm = {
+ IGD_DISPLAY_FIFO,
+ IGD_MAX_WM,
+ IGD_DFT_HPLLOFF_WM,
+ IGD_GUARD_WM,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params igd_cursor_wm = {
+ IGD_CURSOR_FIFO,
+ IGD_CURSOR_MAX_WM,
+ IGD_CURSOR_DFT_WM,
+ IGD_CURSOR_GUARD_WM,
+ IGD_FIFO_LINE_SIZE,
+};
+static struct intel_watermark_params igd_cursor_hplloff_wm = {
+ IGD_CURSOR_FIFO,
+ IGD_CURSOR_MAX_WM,
+ IGD_CURSOR_DFT_WM,
+ IGD_CURSOR_GUARD_WM,
+ IGD_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i945_wm_info = {
+ I945_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 2,
+ I915_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i915_wm_info = {
+ I915_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 2,
+ I915_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i855_wm_info = {
+ I855GM_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 2,
+ I830_FIFO_LINE_SIZE
+};
+static struct intel_watermark_params i830_wm_info = {
+ I830_FIFO_SIZE,
+ I915_MAX_WM,
+ 1,
+ 2,
+ I830_FIFO_LINE_SIZE
+};
+
+/**
+ * intel_calculate_wm - calculate watermark level
+ * @clock_in_khz: pixel clock
+ * @wm: chip FIFO params
+ * @pixel_size: display pixel size
+ * @latency_ns: memory latency for the platform
+ *
+ * Calculate the watermark level (the level at which the display plane will
+ * start fetching from memory again). Each chip has a different display
+ * FIFO size and allocation, so the caller needs to figure that out and pass
+ * in the correct intel_watermark_params structure.
+ *
+ * As the pixel clock runs, the FIFO will be drained at a rate that depends
+ * on the pixel size. When it reaches the watermark level, it'll start
+ * fetching FIFO line sized based chunks from memory until the FIFO fills
+ * past the watermark point. If the FIFO drains completely, a FIFO underrun
+ * will occur, and a display engine hang could result.
+ */
+static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
+ struct intel_watermark_params *wm,
+ int pixel_size,
+ unsigned long latency_ns)
+{
+ long entries_required, wm_size;
+
+ entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ entries_required /= wm->cacheline_size;
+
+ DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
+
+ wm_size = wm->fifo_size - (entries_required + wm->guard_size);
+
+ DRM_DEBUG("FIFO watermark level: %d\n", wm_size);
+
+ /* Don't promote wm_size to unsigned... */
+ if (wm_size > (long)wm->max_wm)
+ wm_size = wm->max_wm;
+ if (wm_size <= 0)
+ wm_size = wm->default_wm;
+ return wm_size;
+}
+
+struct cxsr_latency {
+ int is_desktop;
+ unsigned long fsb_freq;
+ unsigned long mem_freq;
+ unsigned long display_sr;
+ unsigned long display_hpll_disable;
+ unsigned long cursor_sr;
+ unsigned long cursor_hpll_disable;
+};
+
+static struct cxsr_latency cxsr_latency_table[] = {
+ {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
+ {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
+ {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
+
+ {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
+ {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
+ {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
+
+ {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
+ {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
+ {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
+
+ {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
+ {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
+ {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
+
+ {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
+ {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
+ {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
+
+ {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
+ {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
+ {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
+};
+
+static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb,
+ int mem)
+{
+ int i;
+ struct cxsr_latency *latency;
+
+ if (fsb == 0 || mem == 0)
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
+ latency = &cxsr_latency_table[i];
+ if (is_desktop == latency->is_desktop &&
+ fsb == latency->fsb_freq && mem == latency->mem_freq)
+ break;
+ }
+ if (i >= ARRAY_SIZE(cxsr_latency_table)) {
+ DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+ return NULL;
+ }
+ return latency;
+}
+
+static void igd_disable_cxsr(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg;
+
+ /* deactivate cxsr */
+ reg = I915_READ(DSPFW3);
+ reg &= ~(IGD_SELF_REFRESH_EN);
+ I915_WRITE(DSPFW3, reg);
+ DRM_INFO("Big FIFO is disabled\n");
+}
+
+static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock,
+ int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg;
+ unsigned long wm;
+ struct cxsr_latency *latency;
+
+ latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq,
+ dev_priv->mem_freq);
+ if (!latency) {
+ DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+ igd_disable_cxsr(dev);
+ return;
+ }
+
+ /* Display SR */
+ wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size,
+ latency->display_sr);
+ reg = I915_READ(DSPFW1);
+ reg &= 0x7fffff;
+ reg |= wm << 23;
+ I915_WRITE(DSPFW1, reg);
+ DRM_DEBUG("DSPFW1 register is %x\n", reg);
+
+ /* cursor SR */
+ wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size,
+ latency->cursor_sr);
+ reg = I915_READ(DSPFW3);
+ reg &= ~(0x3f << 24);
+ reg |= (wm & 0x3f) << 24;
+ I915_WRITE(DSPFW3, reg);
+
+ /* Display HPLL off SR */
+ wm = intel_calculate_wm(clock, &igd_display_hplloff_wm,
+ latency->display_hpll_disable, I915_FIFO_LINE_SIZE);
+ reg = I915_READ(DSPFW3);
+ reg &= 0xfffffe00;
+ reg |= wm & 0x1ff;
+ I915_WRITE(DSPFW3, reg);
+
+ /* cursor HPLL off SR */
+ wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size,
+ latency->cursor_hpll_disable);
+ reg = I915_READ(DSPFW3);
+ reg &= ~(0x3f << 16);
+ reg |= (wm & 0x3f) << 16;
+ I915_WRITE(DSPFW3, reg);
+ DRM_DEBUG("DSPFW3 register is %x\n", reg);
+
+ /* activate cxsr */
+ reg = I915_READ(DSPFW3);
+ reg |= IGD_SELF_REFRESH_EN;
+ I915_WRITE(DSPFW3, reg);
+
+ DRM_INFO("Big FIFO is enabled\n");
+
+ return;
+}
+
+const static int latency_ns = 3000; /* default for non-igd platforms */
+
+static int intel_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ if (IS_I9XX(dev)) {
+ if (plane == 0)
+ size = dsparb & 0x7f;
+ else
+ size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
+ (dsparb & 0x7f);
+ } else if (IS_I85X(dev)) {
+ if (plane == 0)
+ size = dsparb & 0x1ff;
+ else
+ size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
+ (dsparb & 0x1ff);
+ size >>= 1; /* Convert to cachelines */
+ } else if (IS_845G(dev)) {
+ size = dsparb & 0x7f;
+ size >>= 2; /* Convert to cachelines */
+ } else {
+ size = dsparb & 0x7f;
+ size >>= 1; /* Convert to cachelines */
+ }
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
+
+static void i965_update_wm(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n");
+
+ /* 965 has limitations... */
+ I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0));
+ I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+}
+
+static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t fwater_lo;
+ uint32_t fwater_hi;
+ int total_size, cacheline_size, cwm, srwm = 1;
+ int planea_wm, planeb_wm;
+ struct intel_watermark_params planea_params, planeb_params;
+ unsigned long line_time_us;
+ int sr_clock, sr_entries = 0;
+
+ /* Create copies of the base settings for each pipe */
+ if (IS_I965GM(dev) || IS_I945GM(dev))
+ planea_params = planeb_params = i945_wm_info;
+ else if (IS_I9XX(dev))
+ planea_params = planeb_params = i915_wm_info;
+ else
+ planea_params = planeb_params = i855_wm_info;
+
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
+
+ /* Update per-plane FIFO sizes */
+ planea_params.fifo_size = intel_get_fifo_size(dev, 0);
+ planeb_params.fifo_size = intel_get_fifo_size(dev, 1);
+
+ planea_wm = intel_calculate_wm(planea_clock, &planea_params,
+ pixel_size, latency_ns);
+ planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
+ pixel_size, latency_ns);
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+ /*
+ * Overlay gets an aggressive default since video jitter is bad.
+ */
+ cwm = 2;
+
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 6000;
+
+ sr_clock = planea_clock ? planea_clock : planeb_clock;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ srwm = total_size - sr_entries;
+ if (srwm < 0)
+ srwm = 1;
+ if (IS_I9XX(dev))
+ I915_WRITE(FW_BLC_SELF, (srwm & 0x3f));
+ }
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
+ planea_wm, planeb_wm, cwm, srwm);
+
+ fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
+ fwater_hi = (cwm & 0x1f);
+
+ /* Set request length to 8 cachelines per fetch */
+ fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
+ fwater_hi = fwater_hi | (1 << 8);
+
+ I915_WRITE(FW_BLC, fwater_lo);
+ I915_WRITE(FW_BLC2, fwater_hi);
+}
+
+static void i830_update_wm(struct drm_device *dev, int planea_clock,
+ int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
+ int planea_wm;
+
+ i830_wm_info.fifo_size = intel_get_fifo_size(dev, 0);
+
+ planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
+ pixel_size, latency_ns);
+ fwater_lo |= (3<<8) | planea_wm;
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d\n", planea_wm);
+
+ I915_WRITE(FW_BLC, fwater_lo);
+}
+
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ * - normal (i.e. non-self-refresh)
+ * - self-refresh (SR) mode
+ * - lines are large relative to FIFO size (buffer can hold up to 2)
+ * - lines are small relative to FIFO size (buffer can hold more than 2
+ * lines), so need to account for TLB latency
+ *
+ * The normal calculation is:
+ * watermark = dotclock * bytes per pixel * latency
+ * where latency is platform & configuration dependent (we assume pessimal
+ * values here).
+ *
+ * The SR calculation is:
+ * watermark = (trunc(latency/line time)+1) * surface width *
+ * bytes per pixel
+ * where
+ * line time = htotal / dotclock
+ * and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that. And on Crestline we have
+ * to set the non-SR watermarks to 8.
+ */
+static void intel_update_watermarks(struct drm_device *dev)
+{
+ struct drm_crtc *crtc;
+ struct intel_crtc *intel_crtc;
+ int sr_hdisplay = 0;
+ unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
+ int enabled = 0, pixel_size = 0;
+
+ if (DSPARB_HWCONTROL(dev))
+ return;
+
+ /* Get the clock config from both planes */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ intel_crtc = to_intel_crtc(crtc);
+ if (crtc->enabled) {
+ enabled++;
+ if (intel_crtc->plane == 0) {
+ DRM_DEBUG("plane A (pipe %d) clock: %d\n",
+ intel_crtc->pipe, crtc->mode.clock);
+ planea_clock = crtc->mode.clock;
+ } else {
+ DRM_DEBUG("plane B (pipe %d) clock: %d\n",
+ intel_crtc->pipe, crtc->mode.clock);
+ planeb_clock = crtc->mode.clock;
+ }
+ sr_hdisplay = crtc->mode.hdisplay;
+ sr_clock = crtc->mode.clock;
+ if (crtc->fb)
+ pixel_size = crtc->fb->bits_per_pixel / 8;
+ else
+ pixel_size = 4; /* by default */
+ }
+ }
+
+ if (enabled <= 0)
+ return;
+
+ /* Single plane configs can enable self refresh */
+ if (enabled == 1 && IS_IGD(dev))
+ igd_enable_cxsr(dev, sr_clock, pixel_size);
+ else if (IS_IGD(dev))
+ igd_disable_cxsr(dev);
+
+ if (IS_I965G(dev))
+ i965_update_wm(dev);
+ else if (IS_I9XX(dev) || IS_MOBILE(dev))
+ i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay,
+ pixel_size);
+ else
+ i830_update_wm(dev, planea_clock, pixel_size);
+}
+
static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -1541,7 +2253,8 @@
intel_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ bool is_edp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
@@ -1557,6 +2270,7 @@
int lvds_reg = LVDS;
u32 temp;
int sdvo_pixel_multiply;
+ int target_clock;
drm_vblank_pre_modeset(dev, pipe);
@@ -1585,6 +2299,12 @@
case INTEL_OUTPUT_ANALOG:
is_crt = true;
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ is_edp = true;
+ break;
}
num_outputs++;
@@ -1600,6 +2320,7 @@
} else {
refclk = 48000;
}
+
/*
* Returns a set of divisors for the desired target clock with the given
@@ -1635,11 +2356,29 @@
}
/* FDI link */
- if (IS_IGDNG(dev))
- igdng_compute_m_n(3, 4, /* lane num 4 */
- adjusted_mode->clock,
- 270000, /* lane clock */
- &m_n);
+ if (IS_IGDNG(dev)) {
+ int lane, link_bw;
+ /* eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (is_edp) {
+ struct drm_connector *edp;
+ target_clock = mode->clock;
+ edp = intel_pipe_get_output(crtc);
+ intel_edp_link_config(to_intel_output(edp),
+ &lane, &link_bw);
+ } else {
+ /* DP over FDI requires target mode clock
+ instead of link clock */
+ if (is_dp)
+ target_clock = mode->clock;
+ else
+ target_clock = adjusted_mode->clock;
+ lane = 4;
+ link_bw = 270000;
+ }
+ igdng_compute_m_n(3, lane, target_clock,
+ link_bw, &m_n);
+ }
if (IS_IGD(dev))
fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
@@ -1662,6 +2401,8 @@
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
+ if (is_dp)
+ dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (IS_IGD(dev))
@@ -1758,29 +2499,15 @@
dpll_reg = pch_dpll_reg;
}
- if (dpll & DPLL_VCO_ENABLE) {
+ if (is_edp) {
+ igdng_disable_pll_edp(crtc);
+ } else if ((dpll & DPLL_VCO_ENABLE)) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);
udelay(150);
}
- if (IS_IGDNG(dev)) {
- /* enable PCH clock reference source */
- /* XXX need to change the setting for other outputs */
- u32 temp;
- temp = I915_READ(PCH_DREF_CONTROL);
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_CK505_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- temp &= ~DREF_SSC1_ENABLE;
- /* if no eDP, disable source output to CPU */
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
- temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
- }
-
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
* This is an exception to the general rule that mode_set doesn't turn
* things on.
@@ -1809,24 +2536,28 @@
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
+ if (is_dp)
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
- I915_WRITE(fp_reg, fp);
- I915_WRITE(dpll_reg, dpll);
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
-
- if (IS_I965G(dev) && !IS_IGDNG(dev)) {
- sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
- ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
- } else {
- /* write it again -- the BIOS does, after all */
+ if (!is_edp) {
+ I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ if (IS_I965G(dev) && !IS_IGDNG(dev)) {
+ sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else {
+ /* write it again -- the BIOS does, after all */
+ I915_WRITE(dpll_reg, dpll);
+ }
+ I915_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
}
- I915_READ(dpll_reg);
- /* Wait for the clocks to stabilize. */
- udelay(150);
I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
@@ -1856,10 +2587,14 @@
I915_WRITE(link_m1_reg, m_n.link_m);
I915_WRITE(link_n1_reg, m_n.link_n);
- /* enable FDI RX PLL too */
- temp = I915_READ(fdi_rx_reg);
- I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
- udelay(200);
+ if (is_edp) {
+ igdng_set_pll_edp(crtc, adjusted_mode->clock);
+ } else {
+ /* enable FDI RX PLL too */
+ temp = I915_READ(fdi_rx_reg);
+ I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
+ udelay(200);
+ }
}
I915_WRITE(pipeconf_reg, pipeconf);
@@ -1871,6 +2606,9 @@
/* Flush the plane changes */
ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+ intel_update_watermarks(dev);
+
drm_vblank_post_modeset(dev, pipe);
return ret;
@@ -2359,6 +3097,7 @@
drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
intel_crtc->pipe = pipe;
+ intel_crtc->plane = pipe;
for (i = 0; i < 256; i++) {
intel_crtc->lut_r[i] = i;
intel_crtc->lut_g[i] = i;
@@ -2453,12 +3192,17 @@
if (IS_IGDNG(dev)) {
int found;
+ if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+ intel_dp_init(dev, DP_A);
+
if (I915_READ(HDMIB) & PORT_DETECTED) {
/* check SDVOB */
/* found = intel_sdvo_init(dev, HDMIB); */
found = 0;
if (!found)
intel_hdmi_init(dev, HDMIB);
+ if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+ intel_dp_init(dev, PCH_DP_B);
}
if (I915_READ(HDMIC) & PORT_DETECTED)
@@ -2467,6 +3211,12 @@
if (I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
+ if (I915_READ(PCH_DP_C) & DP_DETECTED)
+ intel_dp_init(dev, PCH_DP_C);
+
+ if (I915_READ(PCH_DP_D) & DP_DETECTED)
+ intel_dp_init(dev, PCH_DP_D);
+
} else if (IS_I9XX(dev)) {
int found;
u32 reg;
@@ -2475,6 +3225,8 @@
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
@@ -2487,7 +3239,11 @@
found = intel_sdvo_init(dev, SDVOC);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_C);
}
+ if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ intel_dp_init(dev, DP_D);
} else
intel_dvo_init(dev);
@@ -2530,6 +3286,15 @@
(1 << 1));
clone_mask = (1 << INTEL_OUTPUT_TVOUT);
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ crtc_mask = ((1 << 0) |
+ (1 << 1));
+ clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+ break;
+ case INTEL_OUTPUT_EDP:
+ crtc_mask = (1 << 1);
+ clone_mask = (1 << INTEL_OUTPUT_EDP);
+ break;
}
encoder->possible_crtcs = crtc_mask;
encoder->possible_clones = intel_connector_clones(dev, clone_mask);
@@ -2639,6 +3404,9 @@
if (IS_I965G(dev)) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
+ } else if (IS_I9XX(dev)) {
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
} else {
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 0000000..a6ff15a
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,1318 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE 6
+#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE 9
+
+#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
+
+struct intel_dp_priv {
+ uint32_t output_reg;
+ uint32_t DP;
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ uint32_t save_DP;
+ uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ bool has_audio;
+ int dpms_mode;
+ uint8_t link_bw;
+ uint8_t lane_count;
+ uint8_t dpcd[4];
+ struct intel_output *intel_output;
+ struct i2c_adapter adapter;
+ struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+void
+intel_edp_link_config (struct intel_output *intel_output,
+ int *lane_num, int *link_bw)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ *lane_num = dp_priv->lane_count;
+ if (dp_priv->link_bw == DP_LINK_BW_1_62)
+ *link_bw = 162000;
+ else if (dp_priv->link_bw == DP_LINK_BW_2_7)
+ *link_bw = 270000;
+}
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_lane_count = 4;
+
+ if (dp_priv->dpcd[0] >= 0x11) {
+ max_lane_count = dp_priv->dpcd[2] & 0x1f;
+ switch (max_lane_count) {
+ case 1: case 2: case 4:
+ break;
+ default:
+ max_lane_count = 4;
+ }
+ }
+ return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_link_bw = dp_priv->dpcd[1];
+
+ switch (max_link_bw) {
+ case DP_LINK_BW_1_62:
+ case DP_LINK_BW_2_7:
+ break;
+ default:
+ max_link_bw = DP_LINK_BW_1_62;
+ break;
+ }
+ return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+ if (link_bw == DP_LINK_BW_2_7)
+ return 270000;
+ else
+ return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+ return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+ int max_lanes = intel_dp_max_lane_count(intel_output);
+
+ if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ return MODE_CLOCK_HIGH;
+
+ if (mode->clock < 10000)
+ return MODE_CLOCK_LOW;
+
+ return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+ int i;
+ uint32_t v = 0;
+
+ if (src_bytes > 4)
+ src_bytes = 4;
+ for (i = 0; i < src_bytes; i++)
+ v |= ((uint32_t) src[i]) << ((3-i) * 8);
+ return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+ int i;
+ if (dst_bytes > 4)
+ dst_bytes = 4;
+ for (i = 0; i < dst_bytes; i++)
+ dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_size)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t output_reg = dp_priv->output_reg;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = output_reg + 0x10;
+ uint32_t ch_data = ch_ctl + 4;
+ int i;
+ int recv_bytes;
+ uint32_t ctl;
+ uint32_t status;
+ uint32_t aux_clock_divider;
+ int try;
+
+ /* The clock divider is based off the hrawclk,
+ * and would like to run at 2MHz. So, take the
+ * hrawclk value and divide by 2 and use that
+ */
+ if (IS_eDP(intel_output))
+ aux_clock_divider = 225; /* eDP input clock at 450Mhz */
+ else if (IS_IGDNG(dev))
+ aux_clock_divider = 62; /* IGDNG: input clock fixed at 125Mhz */
+ else
+ aux_clock_divider = intel_hrawclk(dev) / 2;
+
+ /* Must try at least 3 times according to DP spec */
+ for (try = 0; try < 5; try++) {
+ /* Load the send data into the aux channel data registers */
+ for (i = 0; i < send_bytes; i += 4) {
+ uint32_t d = pack_aux(send + i, send_bytes - i);;
+
+ I915_WRITE(ch_data + i, d);
+ }
+
+ ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+ DP_AUX_CH_CTL_TIME_OUT_400us |
+ (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+ (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+ (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR);
+
+ /* Send the command and wait for it to complete */
+ I915_WRITE(ch_ctl, ctl);
+ (void) I915_READ(ch_ctl);
+ for (;;) {
+ udelay(100);
+ status = I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ break;
+ }
+
+ /* Clear done status and any errors */
+ I915_WRITE(ch_ctl, (status |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR));
+ (void) I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
+ break;
+ }
+
+ if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+ DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
+ return -EBUSY;
+ }
+
+ /* Check for timeout or receive error.
+ * Timeouts occur when the sink is not connected
+ */
+ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+ DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
+ return -EIO;
+ }
+
+ /* Timeouts occur when the device isn't connected, so they're
+ * "normal" -- don't fill the kernel log with these */
+ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+ DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status);
+ return -ETIMEDOUT;
+ }
+
+ /* Unload any bytes sent back from the other side */
+ recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+ DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+ if (recv_bytes > recv_size)
+ recv_bytes = recv_size;
+
+ for (i = 0; i < recv_bytes; i += 4) {
+ uint32_t d = I915_READ(ch_data + i);
+
+ unpack_aux(d, recv + i, recv_bytes - i);
+ }
+
+ return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+ uint16_t address, uint8_t *send, int send_bytes)
+{
+ int ret;
+ uint8_t msg[20];
+ int msg_bytes;
+ uint8_t ack;
+
+ if (send_bytes > 16)
+ return -1;
+ msg[0] = AUX_NATIVE_WRITE << 4;
+ msg[1] = address >> 8;
+ msg[2] = address & 0xff;
+ msg[3] = send_bytes - 1;
+ memcpy(&msg[4], send, send_bytes);
+ msg_bytes = send_bytes + 4;
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+ if (ret < 0)
+ return ret;
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+ break;
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -EIO;
+ }
+ return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+ uint16_t address, uint8_t byte)
+{
+ return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+ uint16_t address, uint8_t *recv, int recv_bytes)
+{
+ uint8_t msg[4];
+ int msg_bytes;
+ uint8_t reply[20];
+ int reply_bytes;
+ uint8_t ack;
+ int ret;
+
+ msg[0] = AUX_NATIVE_READ << 4;
+ msg[1] = address >> 8;
+ msg[2] = address & 0xff;
+ msg[3] = recv_bytes - 1;
+
+ msg_bytes = 4;
+ reply_bytes = recv_bytes + 1;
+
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret == 0)
+ return -EPROTO;
+ if (ret < 0)
+ return ret;
+ ack = reply[0];
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+ memcpy(recv, reply + 1, ret - 1);
+ return ret - 1;
+ }
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -EIO;
+ }
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes)
+{
+ struct intel_dp_priv *dp_priv = container_of(adapter,
+ struct intel_dp_priv,
+ adapter);
+ struct intel_output *intel_output = dp_priv->intel_output;
+
+ return intel_dp_aux_ch(intel_output,
+ send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ DRM_ERROR("i2c_init %s\n", name);
+ dp_priv->algo.running = false;
+ dp_priv->algo.address = 0;
+ dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+ memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+ dp_priv->adapter.owner = THIS_MODULE;
+ dp_priv->adapter.class = I2C_CLASS_DDC;
+ strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1);
+ dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0';
+ dp_priv->adapter.algo_data = &dp_priv->algo;
+ dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+
+ return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int lane_count, clock;
+ int max_lane_count = intel_dp_max_lane_count(intel_output);
+ int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+ static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+ for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+ for (clock = 0; clock <= max_clock; clock++) {
+ int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+ if (intel_dp_link_required(mode->clock) <= link_avail) {
+ dp_priv->link_bw = bws[clock];
+ dp_priv->lane_count = lane_count;
+ adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+ DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n",
+ dp_priv->link_bw, dp_priv->lane_count,
+ adjusted_mode->clock);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
+struct intel_dp_m_n {
+ uint32_t tu;
+ uint32_t gmch_m;
+ uint32_t gmch_n;
+ uint32_t link_m;
+ uint32_t link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+ while (*num > 0xffffff || *den > 0xffffff) {
+ *num >>= 1;
+ *den >>= 1;
+ }
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+ int nlanes,
+ int pixel_clock,
+ int link_clock,
+ struct intel_dp_m_n *m_n)
+{
+ m_n->tu = 64;
+ m_n->gmch_m = pixel_clock * bytes_per_pixel;
+ m_n->gmch_n = link_clock * nlanes;
+ intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
+ intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int lane_count = 4;
+ struct intel_dp_m_n m_n;
+
+ /*
+ * Find the lane count in the intel_output private
+ */
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (!connector->encoder || connector->encoder->crtc != crtc)
+ continue;
+
+ if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+ lane_count = dp_priv->lane_count;
+ break;
+ }
+ }
+
+ /*
+ * Compute the GMCH and Link ratios. The '3' here is
+ * the number of bytes_per_pixel post-LUT, which we always
+ * set up for 8-bits of R/G/B, or 3 bytes total.
+ */
+ intel_dp_compute_m_n(3, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
+
+ if (IS_IGDNG(dev)) {
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(TRANSA_DATA_M1,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(TRANSA_DATA_N1, m_n.gmch_n);
+ I915_WRITE(TRANSA_DP_LINK_M1, m_n.link_m);
+ I915_WRITE(TRANSA_DP_LINK_N1, m_n.link_n);
+ } else {
+ I915_WRITE(TRANSB_DATA_M1,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(TRANSB_DATA_N1, m_n.gmch_n);
+ I915_WRITE(TRANSB_DP_LINK_M1, m_n.link_m);
+ I915_WRITE(TRANSB_DP_LINK_N1, m_n.link_n);
+ }
+ } else {
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(PIPEA_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEA_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ } else {
+ I915_WRITE(PIPEB_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEB_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ }
+ }
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_crtc *crtc = intel_output->enc.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ dp_priv->DP = (DP_LINK_TRAIN_OFF |
+ DP_VOLTAGE_0_4 |
+ DP_PRE_EMPHASIS_0 |
+ DP_SYNC_VS_HIGH |
+ DP_SYNC_HS_HIGH);
+
+ switch (dp_priv->lane_count) {
+ case 1:
+ dp_priv->DP |= DP_PORT_WIDTH_1;
+ break;
+ case 2:
+ dp_priv->DP |= DP_PORT_WIDTH_2;
+ break;
+ case 4:
+ dp_priv->DP |= DP_PORT_WIDTH_4;
+ break;
+ }
+ if (dp_priv->has_audio)
+ dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+ memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+ dp_priv->link_configuration[0] = dp_priv->link_bw;
+ dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+ /*
+ * Check for DPCD version > 1.1,
+ * enable enahanced frame stuff in that case
+ */
+ if (dp_priv->dpcd[0] >= 0x11) {
+ dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ dp_priv->DP |= DP_ENHANCED_FRAMING;
+ }
+
+ if (intel_crtc->pipe == 1)
+ dp_priv->DP |= DP_PIPEB_SELECT;
+
+ if (IS_eDP(intel_output)) {
+ /* don't miss out required setting for eDP */
+ dp_priv->DP |= DP_PLL_ENABLE;
+ if (adjusted_mode->clock < 200000)
+ dp_priv->DP |= DP_PLL_FREQ_160MHZ;
+ else
+ dp_priv->DP |= DP_PLL_FREQ_270MHZ;
+ }
+}
+
+static void igdng_edp_backlight_on (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp;
+
+ DRM_DEBUG("\n");
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp |= EDP_BLC_ENABLE;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void igdng_edp_backlight_off (struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp;
+
+ DRM_DEBUG("\n");
+ pp = I915_READ(PCH_PP_CONTROL);
+ pp &= ~EDP_BLC_ENABLE;
+ I915_WRITE(PCH_PP_CONTROL, pp);
+}
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+ if (mode != DRM_MODE_DPMS_ON) {
+ if (dp_reg & DP_PORT_EN) {
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ if (IS_eDP(intel_output))
+ igdng_edp_backlight_off(dev);
+ }
+ } else {
+ if (!(dp_reg & DP_PORT_EN)) {
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ if (IS_eDP(intel_output))
+ igdng_edp_backlight_on(dev);
+ }
+ }
+ dp_priv->dpms_mode = mode;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+ int ret;
+
+ ret = intel_dp_aux_native_read(intel_output,
+ DP_LANE0_1_STATUS,
+ link_status, DP_LINK_STATUS_SIZE);
+ if (ret != DP_LINK_STATUS_SIZE)
+ return false;
+ return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int r)
+{
+ return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+ intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+ dp_priv->save_link_configuration,
+ sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+ DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+ DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char *voltage_names[] = {
+ "0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char *pre_emph_names[] = {
+ "0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char *link_train_names[] = {
+ "pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane_count,
+ uint8_t train_set[4])
+{
+ uint8_t v = 0;
+ uint8_t p = 0;
+ int lane;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+ uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+ if (this_v > v)
+ v = this_v;
+ if (this_p > p)
+ p = this_p;
+ }
+
+ if (v >= I830_DP_VOLTAGE_MAX)
+ v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+ if (p >= intel_dp_pre_emphasis_max(v))
+ p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+ for (lane = 0; lane < 4; lane++)
+ train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+ uint32_t signal_levels = 0;
+
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ default:
+ signal_levels |= DP_VOLTAGE_0_4;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ signal_levels |= DP_VOLTAGE_0_6;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ signal_levels |= DP_VOLTAGE_0_8;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ signal_levels |= DP_VOLTAGE_1_2;
+ break;
+ }
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+ case DP_TRAIN_PRE_EMPHASIS_0:
+ default:
+ signal_levels |= DP_PRE_EMPHASIS_0;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_3_5:
+ signal_levels |= DP_PRE_EMPHASIS_3_5;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_6:
+ signal_levels |= DP_PRE_EMPHASIS_6;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_9_5:
+ signal_levels |= DP_PRE_EMPHASIS_9_5;
+ break;
+ }
+ return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_LANE0_1_STATUS + (lane >> 1);
+ int s = (lane & 1) * 4;
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ int lane;
+ uint8_t lane_status;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & DP_LANE_CR_DONE) == 0)
+ return false;
+ }
+ return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+ DP_LANE_CHANNEL_EQ_DONE|\
+ DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ uint8_t lane_align;
+ uint8_t lane_status;
+ int lane;
+
+ lane_align = intel_dp_link_status(link_status,
+ DP_LANE_ALIGN_STATUS_UPDATED);
+ if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+ return false;
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+ return false;
+ }
+ return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+ uint32_t dp_reg_value,
+ uint8_t dp_train_pat,
+ uint8_t train_set[4],
+ bool first)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int ret;
+
+ I915_WRITE(dp_priv->output_reg, dp_reg_value);
+ POSTING_READ(dp_priv->output_reg);
+ if (first)
+ intel_wait_for_vblank(dev);
+
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET,
+ dp_train_pat);
+
+ ret = intel_dp_aux_native_write(intel_output,
+ DP_TRAINING_LANE0_SET, train_set, 4);
+ if (ret != 4)
+ return false;
+
+ return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t train_set[4];
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+ int i;
+ uint8_t voltage;
+ bool clock_recovery = false;
+ bool channel_eq = false;
+ bool first = true;
+ int tries;
+
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_output, 0x100,
+ link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+ DP |= DP_PORT_EN;
+ DP &= ~DP_LINK_TRAIN_MASK;
+ memset(train_set, 0, 4);
+ voltage = 0xff;
+ tries = 0;
+ clock_recovery = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+ DP_TRAINING_PATTERN_1, train_set, first))
+ break;
+ first = false;
+ /* Set training pattern 1 */
+
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+ clock_recovery = true;
+ break;
+ }
+
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < dp_priv->lane_count; i++)
+ if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+ break;
+ if (i == dp_priv->lane_count)
+ break;
+
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
+ break;
+ } else
+ tries = 0;
+ voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ }
+
+ /* channel equalization */
+ tries = 0;
+ channel_eq = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ /* channel eq pattern */
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+ DP_TRAINING_PATTERN_2, train_set,
+ false))
+ break;
+
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+ channel_eq = true;
+ break;
+ }
+
+ /* Try 5 times */
+ if (tries > 5)
+ break;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ ++tries;
+ }
+
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+ POSTING_READ(dp_priv->output_reg);
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ DRM_DEBUG("\n");
+
+ if (IS_eDP(intel_output)) {
+ DP &= ~DP_PLL_ENABLE;
+ I915_WRITE(dp_priv->output_reg, DP);
+ POSTING_READ(dp_priv->output_reg);
+ udelay(100);
+ }
+
+ DP &= ~DP_LINK_TRAIN_MASK;
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+ POSTING_READ(dp_priv->output_reg);
+
+ udelay(17000);
+
+ if (IS_eDP(intel_output))
+ DP |= DP_LINK_TRAIN_OFF;
+ I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+ POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->save_DP & DP_PORT_EN)
+ intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+ else
+ intel_dp_link_down(intel_output, dp_priv->save_DP);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ * 1. Read DPCD
+ * 2. Configure link according to Receiver Capabilities
+ * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ * 4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+ if (!intel_output->enc.crtc)
+ return;
+
+ if (!intel_dp_get_link_status(intel_output, link_status)) {
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ return;
+ }
+
+ if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+
+static enum drm_connector_status
+igdng_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ enum drm_connector_status status;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t temp, bit;
+ enum drm_connector_status status;
+
+ dp_priv->has_audio = false;
+
+ if (IS_IGDNG(dev))
+ return igdng_dp_detect(connector);
+
+ temp = I915_READ(PORT_HOTPLUG_EN);
+
+ I915_WRITE(PORT_HOTPLUG_EN,
+ temp |
+ DPB_HOTPLUG_INT_EN |
+ DPC_HOTPLUG_INT_EN |
+ DPD_HOTPLUG_INT_EN);
+
+ POSTING_READ(PORT_HOTPLUG_EN);
+
+ switch (dp_priv->output_reg) {
+ case DP_B:
+ bit = DPB_HOTPLUG_INT_STATUS;
+ break;
+ case DP_C:
+ bit = DPC_HOTPLUG_INT_STATUS;
+ break;
+ case DP_D:
+ bit = DPD_HOTPLUG_INT_STATUS;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ temp = I915_READ(PORT_HOTPLUG_STAT);
+
+ if ((temp & bit) == 0)
+ return connector_status_disconnected;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
+
+ /* We should parse the EDID data and find out if it has an audio sink
+ */
+
+ ret = intel_ddc_get_modes(intel_output);
+ if (ret)
+ return ret;
+
+ /* if eDP has no EDID, try to use fixed panel mode from VBT */
+ if (IS_eDP(intel_output)) {
+ if (dev_priv->panel_fixed_mode != NULL) {
+ struct drm_display_mode *mode;
+ mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+ drm_mode_probed_add(connector, mode);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->i2c_bus)
+ intel_i2c_destroy(intel_output->i2c_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+ .dpms = intel_dp_dpms,
+ .mode_fixup = intel_dp_mode_fixup,
+ .prepare = intel_encoder_prepare,
+ .mode_set = intel_dp_mode_set,
+ .commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .save = intel_dp_save,
+ .restore = intel_dp_restore,
+ .detect = intel_dp_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+ .get_modes = intel_dp_get_modes,
+ .mode_valid = intel_dp_mode_valid,
+ .best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+ .destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_hot_plug(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
+ intel_dp_check_link_status(intel_output);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector;
+ struct intel_output *intel_output;
+ struct intel_dp_priv *dp_priv;
+ const char *name = NULL;
+
+ intel_output = kcalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+ if (!intel_output)
+ return;
+
+ dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+ connector = &intel_output->base;
+ drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+ if (output_reg == DP_A)
+ intel_output->type = INTEL_OUTPUT_EDP;
+ else
+ intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = 0;
+
+ dp_priv->intel_output = intel_output;
+ dp_priv->output_reg = output_reg;
+ dp_priv->has_audio = false;
+ dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
+ intel_output->dev_priv = dp_priv;
+
+ drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+ drm_mode_connector_attach_encoder(&intel_output->base,
+ &intel_output->enc);
+ drm_sysfs_connector_add(connector);
+
+ /* Set up the DDC bus. */
+ switch (output_reg) {
+ case DP_A:
+ name = "DPDDC-A";
+ break;
+ case DP_B:
+ case PCH_DP_B:
+ name = "DPDDC-B";
+ break;
+ case DP_C:
+ case PCH_DP_C:
+ name = "DPDDC-C";
+ break;
+ case DP_D:
+ case PCH_DP_D:
+ name = "DPDDC-D";
+ break;
+ }
+
+ intel_dp_i2c_init(intel_output, name);
+
+ intel_output->ddc_bus = &dp_priv->adapter;
+ intel_output->hot_plug = intel_dp_hot_plug;
+
+ if (output_reg == DP_A) {
+ /* initialize panel mode from VBT if available for eDP */
+ if (dev_priv->lfp_lvds_vbt_mode) {
+ dev_priv->panel_fixed_mode =
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (dev_priv->panel_fixed_mode) {
+ dev_priv->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ }
+ }
+ }
+
+ /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+ * 0xd. Failure to do so will result in spurious interrupts being
+ * generated on the port when a cable is not attached.
+ */
+ if (IS_G4X(dev) && !IS_GM45(dev)) {
+ u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+ I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+ }
+}
diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h
new file mode 100644
index 0000000..2b38054
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE 0x8
+#define AUX_NATIVE_READ 0x9
+#define AUX_I2C_WRITE 0x0
+#define AUX_I2C_READ 0x1
+#define AUX_I2C_STATUS 0x2
+#define AUX_I2C_MOT 0x4
+
+#define AUX_NATIVE_REPLY_ACK (0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK (0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER (0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK (0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK (0x0 << 6)
+#define AUX_I2C_REPLY_NACK (0x1 << 6)
+#define AUX_I2C_REPLY_DEFER (0x2 << 6)
+#define AUX_I2C_REPLY_MASK (0x3 << 6)
+
+/* AUX CH addresses */
+#define DP_LINK_BW_SET 0x100
+# define DP_LINK_BW_1_62 0x06
+# define DP_LINK_BW_2_7 0x0a
+
+#define DP_LANE_COUNT_SET 0x101
+# define DP_LANE_COUNT_MASK 0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET 0x102
+
+# define DP_TRAINING_PATTERN_DISABLE 0
+# define DP_TRAINING_PATTERN_1 1
+# define DP_TRAINING_PATTERN_2 2
+# define DP_TRAINING_PATTERN_MASK 0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)
+
+#define DP_TRAINING_LANE0_SET 0x103
+#define DP_TRAINING_LANE1_SET 0x104
+#define DP_TRAINING_LANE2_SET 0x105
+#define DP_TRAINING_LANE3_SET 0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
+# define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL 0x107
+# define DP_SPREAD_AMP_0_5 (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
+# define DP_SET_ANSI_8B10B (1 << 0)
+
+#define DP_LANE0_1_STATUS 0x202
+#define DP_LANE2_3_STATUS 0x203
+
+# define DP_LANE_CR_DONE (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED 0x204
+
+#define DP_INTERLANE_ALIGN_DONE (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
+#define DP_LINK_STATUS_UPDATED (1 << 7)
+
+#define DP_SINK_STATUS 0x205
+
+#define DP_RECEIVE_PORT_0_STATUS (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1 0x206
+#define DP_ADJUST_REQUEST_LANE2_3 0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
+
+struct i2c_algo_dp_aux_data {
+ bool running;
+ u16 address;
+ int (*aux_ch) (struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
new file mode 100644
index 0000000..a63b6f5
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+#include "drmP.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START 1
+#define MODE_I2C_WRITE 2
+#define MODE_I2C_READ 4
+#define MODE_I2C_STOP 8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+ uint8_t write_byte, uint8_t *read_byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ uint16_t address = algo_data->address;
+ uint8_t msg[5];
+ uint8_t reply[2];
+ int msg_bytes;
+ int reply_bytes;
+ int ret;
+
+ /* Set up the command byte */
+ if (mode & MODE_I2C_READ)
+ msg[0] = AUX_I2C_READ << 4;
+ else
+ msg[0] = AUX_I2C_WRITE << 4;
+
+ if (!(mode & MODE_I2C_STOP))
+ msg[0] |= AUX_I2C_MOT << 4;
+
+ msg[1] = address >> 8;
+ msg[2] = address;
+
+ switch (mode) {
+ case MODE_I2C_WRITE:
+ msg[3] = 0;
+ msg[4] = write_byte;
+ msg_bytes = 5;
+ reply_bytes = 1;
+ break;
+ case MODE_I2C_READ:
+ msg[3] = 0;
+ msg_bytes = 4;
+ reply_bytes = 2;
+ break;
+ default:
+ msg_bytes = 3;
+ reply_bytes = 1;
+ break;
+ }
+
+ for (;;) {
+ ret = (*algo_data->aux_ch)(adapter,
+ msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret < 0) {
+ DRM_DEBUG("aux_ch failed %d\n", ret);
+ return ret;
+ }
+ switch (reply[0] & AUX_I2C_REPLY_MASK) {
+ case AUX_I2C_REPLY_ACK:
+ if (mode == MODE_I2C_READ) {
+ *read_byte = reply[1];
+ }
+ return reply_bytes - 1;
+ case AUX_I2C_REPLY_NACK:
+ DRM_DEBUG("aux_ch nack\n");
+ return -EREMOTEIO;
+ case AUX_I2C_REPLY_DEFER:
+ DRM_DEBUG("aux_ch defer\n");
+ udelay(100);
+ break;
+ default:
+ DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
+ return -EREMOTEIO;
+ }
+ }
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_START;
+ int ret;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ algo_data->address = address;
+ algo_data->running = true;
+ ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_STOP;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ if (algo_data->running) {
+ (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ algo_data->running = false;
+ }
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+ return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+ return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ int ret = 0;
+ bool reading = false;
+ int m;
+ int b;
+
+ for (m = 0; m < num; m++) {
+ u16 len = msgs[m].len;
+ u8 *buf = msgs[m].buf;
+ reading = (msgs[m].flags & I2C_M_RD) != 0;
+ ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+ if (ret < 0)
+ break;
+ if (reading) {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+ if (ret < 0)
+ break;
+ }
+ } else {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+ if (ret < 0)
+ break;
+ }
+ }
+ if (ret < 0)
+ break;
+ }
+ if (ret >= 0)
+ ret = num;
+ i2c_algo_dp_aux_stop(adapter, reading);
+ DRM_DEBUG("dp_aux_xfer return %d\n", ret);
+ return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+ .master_xfer = i2c_algo_dp_aux_xfer,
+ .functionality = i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+ (void) i2c_algo_dp_aux_address(adapter, 0, false);
+ (void) i2c_algo_dp_aux_stop(adapter, false);
+
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+ adapter->algo = &i2c_dp_aux_algo;
+ adapter->retries = 3;
+ i2c_dp_aux_reset_bus(adapter);
+ return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+ int error;
+
+ error = i2c_dp_aux_prepare_bus(adapter);
+ if (error)
+ return error;
+ error = i2c_add_adapter(adapter);
+ return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cd4b9c5..d6f92ea 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -54,6 +54,8 @@
#define INTEL_OUTPUT_LVDS 4
#define INTEL_OUTPUT_TVOUT 5
#define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
+#define INTEL_OUTPUT_EDP 8
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
@@ -65,7 +67,6 @@
u32 reg; /* GPIO reg */
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
- u8 slave_addr;
};
struct intel_framebuffer {
@@ -79,11 +80,12 @@
struct drm_encoder enc;
int type;
- struct intel_i2c_chan *i2c_bus; /* for control functions */
- struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+ struct i2c_adapter *i2c_bus;
+ struct i2c_adapter *ddc_bus;
bool load_detect_temp;
bool needs_tv_clock;
void *dev_priv;
+ void (*hot_plug)(struct intel_output *);
};
struct intel_crtc {
@@ -104,9 +106,9 @@
#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
- const char *name);
-void intel_i2c_destroy(struct intel_i2c_chan *chan);
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+ const char *name);
+void intel_i2c_destroy(struct i2c_adapter *adapter);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
@@ -116,6 +118,12 @@
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+extern void intel_edp_link_config (struct intel_output *, int *, int *);
+
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 1ee3007..13bff20 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -384,10 +384,9 @@
{
struct intel_output *intel_output;
struct intel_dvo_device *dvo;
- struct intel_i2c_chan *i2cbus = NULL;
+ struct i2c_adapter *i2cbus = NULL;
int ret = 0;
int i;
- int gpio_inited = 0;
int encoder_type = DRM_MODE_ENCODER_NONE;
intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output)
@@ -420,14 +419,11 @@
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
- if (gpio_inited != gpio) {
- if (i2cbus != NULL)
- intel_i2c_destroy(i2cbus);
- if (!(i2cbus = intel_i2c_create(dev, gpio,
- gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
- continue;
- }
- gpio_inited = gpio;
+ if (i2cbus != NULL)
+ intel_i2c_destroy(i2cbus);
+ if (!(i2cbus = intel_i2c_create(dev, gpio,
+ gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+ continue;
}
if (dvo->dev_ops!= NULL)
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 1af7d68..1d30802 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -453,7 +453,7 @@
size = ALIGN(size, PAGE_SIZE);
fbo = drm_gem_object_alloc(dev, size);
if (!fbo) {
- printk(KERN_ERR "failed to allocate framebuffer\n");
+ DRM_ERROR("failed to allocate framebuffer\n");
ret = -ENOMEM;
goto out;
}
@@ -610,8 +610,8 @@
par->dev = dev;
/* To allow resizeing without swapping buffers */
- printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
- intel_fb->base.height, obj_priv->gtt_offset, fbo);
+ DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
+ intel_fb->base.height, obj_priv->gtt_offset, fbo);
mutex_unlock(&dev->struct_mutex);
return 0;
@@ -698,13 +698,13 @@
} else
intelfb_set_par(info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+ DRM_INFO("fb%d: %s frame buffer device\n", info->node,
info->fix.id);
/* Switch back to kernel console on panic */
kernelfb_mode = *modeset;
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- printk(KERN_INFO "registered panic notifier\n");
+ DRM_DEBUG("registered panic notifier\n");
return 0;
}
@@ -852,13 +852,13 @@
} else
intelfb_set_par(info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+ DRM_INFO("fb%d: %s frame buffer device\n", info->node,
info->fix.id);
/* Switch back to kernel console on panic */
kernelfb_mode = *modeset;
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
- printk(KERN_INFO "registered panic notifier\n");
+ DRM_DEBUG("registered panic notifier\n");
return 0;
}
@@ -872,8 +872,8 @@
{
int ret;
if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) {
- printk(KERN_ERR "Failed to restore crtc configuration: %d\n",
- ret);
+ DRM_ERROR("Failed to restore crtc configuration: %d\n",
+ ret);
}
}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 4ea2a65..1842290 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -31,6 +31,7 @@
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
@@ -56,8 +57,7 @@
sdvox = SDVO_ENCODING_HDMI |
SDVO_BORDER_ENABLE |
SDVO_VSYNC_ACTIVE_HIGH |
- SDVO_HSYNC_ACTIVE_HIGH |
- SDVO_NULL_PACKETS_DURING_VSYNC;
+ SDVO_HSYNC_ACTIVE_HIGH;
if (hdmi_priv->has_hdmi_sink)
sdvox |= SDVO_AUDIO_ENABLE;
@@ -129,83 +129,28 @@
return true;
}
-static void
-intel_hdmi_sink_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_hdmi_detect(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
struct edid *edid = NULL;
-
- edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
- if (edid != NULL) {
- hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
- kfree(edid);
- intel_output->base.display_info.raw_edid = NULL;
- }
-}
-
-static enum drm_connector_status
-igdng_hdmi_detect(struct drm_connector *connector)
-{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
-
- /* FIXME hotplug detect */
+ enum drm_connector_status status = connector_status_disconnected;
hdmi_priv->has_hdmi_sink = false;
- intel_hdmi_sink_detect(connector);
- if (hdmi_priv->has_hdmi_sink)
- return connector_status_connected;
- else
- return connector_status_disconnected;
-}
+ edid = drm_get_edid(&intel_output->base,
+ intel_output->ddc_bus);
-static enum drm_connector_status
-intel_hdmi_detect(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
- u32 temp, bit;
-
- if (IS_IGDNG(dev))
- return igdng_hdmi_detect(connector);
-
- temp = I915_READ(PORT_HOTPLUG_EN);
-
- switch (hdmi_priv->sdvox_reg) {
- case SDVOB:
- temp |= HDMIB_HOTPLUG_INT_EN;
- break;
- case SDVOC:
- temp |= HDMIC_HOTPLUG_INT_EN;
- break;
- default:
- return connector_status_unknown;
+ if (edid) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ status = connector_status_connected;
+ hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+ }
+ intel_output->base.display_info.raw_edid = NULL;
+ kfree(edid);
}
- I915_WRITE(PORT_HOTPLUG_EN, temp);
-
- POSTING_READ(PORT_HOTPLUG_EN);
-
- switch (hdmi_priv->sdvox_reg) {
- case SDVOB:
- bit = HDMIB_HOTPLUG_INT_STATUS;
- break;
- case SDVOC:
- bit = HDMIC_HOTPLUG_INT_STATUS;
- break;
- default:
- return connector_status_unknown;
- }
-
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
- intel_hdmi_sink_detect(connector);
- return connector_status_connected;
- } else
- return connector_status_disconnected;
+ return status;
}
static int intel_hdmi_get_modes(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index f7061f6..62b8bea 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -124,6 +124,7 @@
* @output: driver specific output device
* @reg: GPIO reg to use
* @name: name for this bus
+ * @slave_addr: slave address (if fixed)
*
* Creates and registers a new i2c bus with the Linux i2c layer, for use
* in output probing and control (e.g. DDC or SDVO control functions).
@@ -139,8 +140,8 @@
* %GPIOH
* see PRM for details on how these different busses are used.
*/
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
- const char *name)
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+ const char *name)
{
struct intel_i2c_chan *chan;
@@ -174,7 +175,7 @@
intel_i2c_quirk_set(dev, false);
udelay(20);
- return chan;
+ return &chan->adapter;
out_free:
kfree(chan);
@@ -187,11 +188,16 @@
*
* Unregister the adapter from the i2c layer, then free the structure.
*/
-void intel_i2c_destroy(struct intel_i2c_chan *chan)
+void intel_i2c_destroy(struct i2c_adapter *adapter)
{
- if (!chan)
+ struct intel_i2c_chan *chan;
+
+ if (!adapter)
return;
+ chan = container_of(adapter,
+ struct intel_i2c_chan,
+ adapter);
i2c_del_adapter(&chan->adapter);
kfree(chan);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f073ed8..3f445a8 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -36,9 +36,25 @@
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include <linux/acpi.h>
#define I915_LVDS "i915_lvds"
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU 0
+ * #define DRM_MODE_SCALE_FULLSCREEN 1
+ * #define DRM_MODE_SCALE_NO_SCALE 2
+ * #define DRM_MODE_SCALE_ASPECT 3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+ int fitting_mode;
+ u32 pfit_control;
+ u32 pfit_pgm_ratios;
+};
+
/**
* Sets the backlight level.
*
@@ -213,26 +229,45 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ /*
+ * float point operation is not supported . So the PANEL_RATIO_FACTOR
+ * is defined, which can avoid the float point computation when
+ * calculating the panel ratio.
+ */
+#define PANEL_RATIO_FACTOR 8192
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ u32 pfit_control = 0, pfit_pgm_ratios = 0;
+ int left_border = 0, right_border = 0, top_border = 0;
+ int bottom_border = 0;
+ bool border = 0;
+ int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+ int horiz_ratio, vert_ratio;
+ u32 hsync_width, vsync_width;
+ u32 hblank_width, vblank_width;
+ u32 hsync_pos, vsync_pos;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
- printk(KERN_ERR "Can't support LVDS on pipe A\n");
+ DRM_ERROR("Can't support LVDS on pipe A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
- printk(KERN_ERR "Can't enable LVDS and another "
+ DRM_ERROR("Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
-
+ /* If we don't have a panel mode, there is nothing we can do */
+ if (dev_priv->panel_fixed_mode == NULL)
+ return true;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
@@ -256,6 +291,243 @@
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
+ /* Make sure pre-965s set dither correctly */
+ if (!IS_I965G(dev)) {
+ if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+ }
+
+ /* Native modes don't need fitting */
+ if (adjusted_mode->hdisplay == mode->hdisplay &&
+ adjusted_mode->vdisplay == mode->vdisplay) {
+ pfit_pgm_ratios = 0;
+ border = 0;
+ goto out;
+ }
+
+ /* 965+ wants fuzzy fitting */
+ if (IS_I965G(dev))
+ pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+ PFIT_FILTER_FUZZY;
+
+ hsync_width = adjusted_mode->crtc_hsync_end -
+ adjusted_mode->crtc_hsync_start;
+ vsync_width = adjusted_mode->crtc_vsync_end -
+ adjusted_mode->crtc_vsync_start;
+ hblank_width = adjusted_mode->crtc_hblank_end -
+ adjusted_mode->crtc_hblank_start;
+ vblank_width = adjusted_mode->crtc_vblank_end -
+ adjusted_mode->crtc_vblank_start;
+ /*
+ * Deal with panel fitting options. Figure out how to stretch the
+ * image based on its aspect ratio & the current panel fitting mode.
+ */
+ panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+ adjusted_mode->vdisplay;
+ desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+ mode->vdisplay;
+ /*
+ * Enable automatic panel scaling for non-native modes so that they fill
+ * the screen. Should be enabled before the pipe is enabled, according
+ * to register description and PRM.
+ * Change the value here to see the borders for debugging
+ */
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+
+ switch (lvds_priv->fitting_mode) {
+ case DRM_MODE_SCALE_NO_SCALE:
+ /*
+ * For centered modes, we have to calculate border widths &
+ * heights and modify the values programmed into the CRTC.
+ */
+ left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1)
+ right_border++;
+ top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ /* Set active & border values */
+ adjusted_mode->crtc_hdisplay = mode->hdisplay;
+ /* Keep the boder be even */
+ if (right_border & 1)
+ right_border++;
+ /* use the border directly instead of border minuse one */
+ adjusted_mode->crtc_hblank_start = mode->hdisplay +
+ right_border;
+ /* keep the blank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start + hblank_width;
+ /* get the hsync pos relative to hblank start */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start + hsync_pos;
+ /* keep the hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start + hsync_width;
+ adjusted_mode->crtc_vdisplay = mode->vdisplay;
+ /* use the border instead of border minus one */
+ adjusted_mode->crtc_vblank_start = mode->vdisplay +
+ bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start + vblank_width;
+ /* get the vsync start postion relative to vblank start */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start + vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vblank_start + vsync_width;
+ border = 1;
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ /* Scale but preserve the spect ratio */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev)) {
+ /* 965+ is easy, it does everything in hw */
+ if (panel_ratio > desired_ratio)
+ pfit_control |= PFIT_SCALING_PILLAR;
+ else if (panel_ratio < desired_ratio)
+ pfit_control |= PFIT_SCALING_LETTER;
+ else
+ pfit_control |= PFIT_SCALING_AUTO;
+ } else {
+ /*
+ * For earlier chips we have to calculate the scaling
+ * ratio by hand and program it into the
+ * PFIT_PGM_RATIO register
+ */
+ u32 horiz_bits, vert_bits, bits = 12;
+ horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->hdisplay;
+ vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->vdisplay;
+ horiz_scale = adjusted_mode->hdisplay *
+ PANEL_RATIO_FACTOR / mode->hdisplay;
+ vert_scale = adjusted_mode->vdisplay *
+ PANEL_RATIO_FACTOR / mode->vdisplay;
+
+ /* retain aspect ratio */
+ if (panel_ratio > desired_ratio) { /* Pillar */
+ u32 scaled_width;
+ scaled_width = mode->hdisplay * vert_scale /
+ PANEL_RATIO_FACTOR;
+ horiz_ratio = vert_ratio;
+ pfit_control |= (VERT_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Pillar will have left/right borders */
+ left_border = (adjusted_mode->hdisplay -
+ scaled_width) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1) /* odd resolutions */
+ right_border++;
+ /* keep the border be even */
+ if (right_border & 1)
+ right_border++;
+ adjusted_mode->crtc_hdisplay = scaled_width;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_hblank_start =
+ scaled_width + right_border;
+ /* keep the hblank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start +
+ hblank_width;
+ /*
+ * get the hsync start pos relative to
+ * hblank start
+ */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync_pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start +
+ hsync_pos;
+ /* keept hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start +
+ hsync_width;
+ border = 1;
+ } else if (panel_ratio < desired_ratio) { /* letter */
+ u32 scaled_height = mode->vdisplay *
+ horiz_scale / PANEL_RATIO_FACTOR;
+ vert_ratio = horiz_ratio;
+ pfit_control |= (HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Letterbox will have top/bottom border */
+ top_border = (adjusted_mode->vdisplay -
+ scaled_height) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ adjusted_mode->crtc_vdisplay = scaled_height;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_vblank_start =
+ scaled_height + bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start +
+ vblank_width;
+ /*
+ * get the vsync start pos relative to
+ * vblank start
+ */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start +
+ vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vsync_start +
+ vsync_width;
+ border = 1;
+ } else {
+ /* Aspects match, Let hw scale both directions */
+ pfit_control |= (VERT_AUTO_SCALE |
+ HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ horiz_bits = (1 << bits) * horiz_ratio /
+ PANEL_RATIO_FACTOR;
+ vert_bits = (1 << bits) * vert_ratio /
+ PANEL_RATIO_FACTOR;
+ pfit_pgm_ratios =
+ ((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+ PFIT_VERT_SCALE_MASK) |
+ ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+ PFIT_HORIZ_SCALE_MASK);
+ }
+ break;
+
+ case DRM_MODE_SCALE_FULLSCREEN:
+ /*
+ * Full scaling, even if it changes the aspect ratio.
+ * Fortunately this is all done for us in hw.
+ */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev))
+ pfit_control |= PFIT_SCALING_AUTO;
+ else
+ pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ break;
+ default:
+ break;
+ }
+
+out:
+ lvds_priv->pfit_control = pfit_control;
+ lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
@@ -301,8 +573,8 @@
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
- u32 pfit_control;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
@@ -319,22 +591,8 @@
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (!IS_I965G(dev)) {
- if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
- }
- else
- pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
- I915_WRITE(PFIT_CONTROL, pfit_control);
+ I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
/**
@@ -406,6 +664,34 @@
struct drm_property *property,
uint64_t value)
{
+ struct drm_device *dev = connector->dev;
+ struct intel_output *intel_output =
+ to_intel_output(connector);
+
+ if (property == dev->mode_config.scaling_mode_property &&
+ connector->encoder) {
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ if (value == DRM_MODE_SCALE_NON_GPU) {
+ DRM_DEBUG_KMS(I915_LVDS,
+ "non_GPU property is unsupported\n");
+ return 0;
+ }
+ if (lvds_priv->fitting_mode == value) {
+ /* the LVDS scaling property is not changed */
+ return 0;
+ }
+ lvds_priv->fitting_mode = value;
+ if (crtc && crtc->enabled) {
+ /*
+ * If the CRTC is enabled, the display will be changed
+ * according to the new panel fitting mode.
+ */
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
+ }
+ }
+
return 0;
}
@@ -456,7 +742,7 @@
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
@@ -464,7 +750,7 @@
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core 2 series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
},
},
@@ -494,6 +780,14 @@
},
{
.callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen Mini PC MP915",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
.ident = "Aopen i945GTt-VFA",
.matches = {
DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
@@ -503,6 +797,65 @@
{ } /* terminating entry */
};
+#ifdef CONFIG_ACPI
+/*
+ * check_lid_device -- check whether @handle is an ACPI LID device.
+ * @handle: ACPI device handle
+ * @level : depth in the ACPI namespace tree
+ * @context: the number of LID device when we find the device
+ * @rv: a return value to fill if desired (Not use)
+ */
+static acpi_status
+check_lid_device(acpi_handle handle, u32 level, void *context,
+ void **return_value)
+{
+ struct acpi_device *acpi_dev;
+ int *lid_present = context;
+
+ acpi_dev = NULL;
+ /* Get the acpi device for device handle */
+ if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
+ /* If there is no ACPI device for handle, return */
+ return AE_OK;
+ }
+
+ if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
+ *lid_present = 1;
+
+ return AE_OK;
+}
+
+/**
+ * check whether there exists the ACPI LID device by enumerating the ACPI
+ * device tree.
+ */
+static int intel_lid_present(void)
+{
+ int lid_present = 0;
+
+ if (acpi_disabled) {
+ /* If ACPI is disabled, there is no ACPI device tree to
+ * check, so assume the LID device would have been present.
+ */
+ return 1;
+ }
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX,
+ check_lid_device, &lid_present, NULL);
+
+ return lid_present;
+}
+#else
+static int intel_lid_present(void)
+{
+ /* In the absence of ACPI built in, assume that the LID device would
+ * have been present.
+ */
+ return 1;
+}
+#endif
+
/**
* intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
@@ -518,6 +871,7 @@
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
+ struct intel_lvds_priv *lvds_priv;
u32 lvds;
int pipe, gpio = GPIOC;
@@ -525,13 +879,28 @@
if (dmi_check_system(intel_no_lvds))
return;
+ /* Assume that any device without an ACPI LID device also doesn't
+ * have an integrated LVDS. We would be better off parsing the BIOS
+ * to get a reliable indicator, but that code isn't written yet.
+ *
+ * In the case of all-in-one desktops using LVDS that we've seen,
+ * they're using SDVO LVDS.
+ */
+ if (!intel_lid_present())
+ return;
+
if (IS_IGDNG(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
return;
+ if (dev_priv->edp_support) {
+ DRM_DEBUG("disable LVDS for eDP support\n");
+ return;
+ }
gpio = PCH_GPIOC;
}
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+ intel_output = kzalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_lvds_priv), GFP_KERNEL);
if (!intel_output) {
return;
}
@@ -553,7 +922,18 @@
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
+ lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+ intel_output->dev_priv = lvds_priv;
+ /* create the scaling mode property */
+ drm_mode_create_scaling_mode_property(dev);
+ /*
+ * the initial panel fitting mode will be FULL_SCREEN.
+ */
+ drm_connector_attach_property(&intel_output->base,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
/*
* LVDS discovery:
* 1) check for EDID on DDC
@@ -649,5 +1029,5 @@
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
- kfree(connector);
+ kfree(intel_output);
}
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index e0910fe..67e2f46 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -53,10 +53,9 @@
}
};
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
- ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
-
+ intel_i2c_quirk_set(intel_output->base.dev, true);
+ ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
+ intel_i2c_quirk_set(intel_output->base.dev, false);
if (ret == 2)
return true;
@@ -74,10 +73,9 @@
struct edid *edid;
int ret = 0;
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
- edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+ intel_i2c_quirk_set(intel_output->base.dev, true);
+ edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
+ intel_i2c_quirk_set(intel_output->base.dev, false);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9a00adb..5371d93 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -31,6 +31,7 @@
#include "drm.h"
#include "drm_crtc.h"
#include "intel_drv.h"
+#include "drm_edid.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_sdvo_regs.h"
@@ -38,8 +39,7 @@
#undef SDVO_DEBUG
#define I915_SDVO "i915_sdvo"
struct intel_sdvo_priv {
- struct intel_i2c_chan *i2c_bus;
- int slaveaddr;
+ u8 slave_addr;
/* Register for the SDVO device: SDVOB or SDVOC */
int output_device;
@@ -56,6 +56,12 @@
/* Pixel clock limitations reported by the SDVO device, in kHz */
int pixel_clock_min, pixel_clock_max;
+ /*
+ * For multiple function SDVO device,
+ * this is for current attached outputs.
+ */
+ uint16_t attached_output;
+
/**
* This is set if we're going to treat the device as TV-out.
*
@@ -69,12 +75,23 @@
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
+
/**
* This is set if we detect output of sdvo device as LVDS.
*/
bool is_lvds;
/**
+ * This is sdvo flags for input timing.
+ */
+ uint8_t sdvo_flags;
+
+ /**
+ * This is sdvo fixed pannel mode pointer
+ */
+ struct drm_display_mode *sdvo_lvds_fixed_mode;
+
+ /**
* Returned SDTV resolutions allowed for the current format, if the
* device reported it.
*/
@@ -104,6 +121,9 @@
u32 save_SDVOX;
};
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags);
+
/**
* Writes the SDVOB or SDVOC with the given value, but always writes both
* SDVOB and SDVOC to work around apparent hardware issues (according to
@@ -146,13 +166,13 @@
struct i2c_msg msgs[] = {
{
- .addr = sdvo_priv->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = sdvo_priv->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = I2C_M_RD,
.len = 1,
.buf = buf,
@@ -162,7 +182,7 @@
out_buf[0] = addr;
out_buf[1] = 0;
- if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+ if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
{
*ch = buf[0];
return true;
@@ -175,10 +195,11 @@
static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
u8 ch)
{
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
u8 out_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = intel_output->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -188,7 +209,7 @@
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+ if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
{
return true;
}
@@ -592,6 +613,7 @@
uint16_t height)
{
struct intel_sdvo_preferred_input_timing_args args;
+ struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
uint8_t status;
memset(&args, 0, sizeof(args));
@@ -599,7 +621,12 @@
args.width = width;
args.height = height;
args.interlace = 0;
- args.scaled = 0;
+
+ if (sdvo_priv->is_lvds &&
+ (sdvo_priv->sdvo_lvds_fixed_mode->hdisplay != width ||
+ sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height))
+ args.scaled = 1;
+
intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
&args, sizeof(args));
status = intel_sdvo_read_response(output, NULL, 0);
@@ -944,12 +971,7 @@
struct intel_output *output = enc_to_intel_output(encoder);
struct intel_sdvo_priv *dev_priv = output->dev_priv;
- if (!dev_priv->is_tv) {
- /* Make the CRTC code factor in the SDVO pixel multiplier. The
- * SDVO device will be told of the multiplier during mode_set.
- */
- adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
- } else {
+ if (dev_priv->is_tv) {
struct intel_sdvo_dtd output_dtd;
bool success;
@@ -980,6 +1002,7 @@
intel_sdvo_get_preferred_input_timing(output,
&input_dtd);
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+ dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
drm_mode_set_crtcinfo(adjusted_mode, 0);
@@ -990,6 +1013,52 @@
} else {
return false;
}
+ } else if (dev_priv->is_lvds) {
+ struct intel_sdvo_dtd output_dtd;
+ bool success;
+
+ drm_mode_set_crtcinfo(dev_priv->sdvo_lvds_fixed_mode, 0);
+ /* Set output timings */
+ intel_sdvo_get_dtd_from_mode(&output_dtd,
+ dev_priv->sdvo_lvds_fixed_mode);
+
+ intel_sdvo_set_target_output(output,
+ dev_priv->controlled_output);
+ intel_sdvo_set_output_timing(output, &output_dtd);
+
+ /* Set the input timing to the screen. Assume always input 0. */
+ intel_sdvo_set_target_input(output, true, false);
+
+
+ success = intel_sdvo_create_preferred_input_timing(
+ output,
+ mode->clock / 10,
+ mode->hdisplay,
+ mode->vdisplay);
+
+ if (success) {
+ struct intel_sdvo_dtd input_dtd;
+
+ intel_sdvo_get_preferred_input_timing(output,
+ &input_dtd);
+ intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+ dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
+
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+ mode->clock = adjusted_mode->clock;
+
+ adjusted_mode->clock *=
+ intel_sdvo_get_pixel_multiplier(mode);
+ } else {
+ return false;
+ }
+
+ } else {
+ /* Make the CRTC code factor in the SDVO pixel multiplier. The
+ * SDVO device will be told of the multiplier during mode_set.
+ */
+ adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
}
return true;
}
@@ -1033,15 +1102,16 @@
/* We have tried to get input timing in mode_fixup, and filled into
adjusted_mode */
- if (sdvo_priv->is_tv)
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
- else
+ input_dtd.part2.sdvo_flags = sdvo_priv->sdvo_flags;
+ } else
intel_sdvo_get_dtd_from_mode(&input_dtd, mode);
/* If it's a TV, we already set the output timing in mode_fixup.
* Otherwise, the output timing is equal to the input timing.
*/
- if (!sdvo_priv->is_tv) {
+ if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) {
/* Set the output timing to the screen */
intel_sdvo_set_target_output(output,
sdvo_priv->controlled_output);
@@ -1116,6 +1186,8 @@
sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
}
+ if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL)
+ sdvox |= SDVO_STALL_SELECT;
intel_sdvo_write_sdvox(output, sdvox);
}
@@ -1276,6 +1348,17 @@
if (sdvo_priv->pixel_clock_max < mode->clock)
return MODE_CLOCK_HIGH;
+ if (sdvo_priv->is_lvds == true) {
+ if (sdvo_priv->sdvo_lvds_fixed_mode == NULL)
+ return MODE_PANEL;
+
+ if (mode->hdisplay > sdvo_priv->sdvo_lvds_fixed_mode->hdisplay)
+ return MODE_PANEL;
+
+ if (mode->vdisplay > sdvo_priv->sdvo_lvds_fixed_mode->vdisplay)
+ return MODE_PANEL;
+ }
+
return MODE_OK;
}
@@ -1362,42 +1445,96 @@
intel_sdvo_read_response(intel_output, &response, 2);
}
-static void
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+static bool
+intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
+{
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ int caps = 0;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
+ caps++;
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_YPRPB0 | SDVO_OUTPUT_YPRPB1))
+ caps++;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_SCART0 | SDVO_OUTPUT_SCART1))
+ caps++;
+
+ if (sdvo_priv->caps.output_flags &
+ (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1))
+ caps++;
+
+ return (caps > 1);
+}
+
+enum drm_connector_status
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ enum drm_connector_status status = connector_status_connected;
struct edid *edid = NULL;
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
+ intel_output->ddc_bus);
if (edid != NULL) {
- sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+ /* Don't report the output as connected if it's a DVI-I
+ * connector with a non-digital EDID coming out.
+ */
+ if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL)
+ sdvo_priv->is_hdmi =
+ drm_detect_hdmi_monitor(edid);
+ else
+ status = connector_status_disconnected;
+ }
+
kfree(edid);
intel_output->base.display_info.raw_edid = NULL;
- }
+
+ } else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+ status = connector_status_disconnected;
+
+ return status;
}
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
{
- u8 response[2];
+ uint16_t response;
u8 status;
struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
status = intel_sdvo_read_response(intel_output, &response, 2);
- DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+ DRM_DEBUG("SDVO response %d %d\n", response & 0xff, response >> 8);
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
- if ((response[0] != 0) || (response[1] != 0)) {
- intel_sdvo_hdmi_sink_detect(connector);
- return connector_status_connected;
- } else
+ if (response == 0)
return connector_status_disconnected;
+
+ if (intel_sdvo_multifunc_encoder(intel_output) &&
+ sdvo_priv->attached_output != response) {
+ if (sdvo_priv->controlled_output != response &&
+ intel_sdvo_output_setup(intel_output, response) != true)
+ return connector_status_unknown;
+ sdvo_priv->attached_output = response;
+ }
+ return intel_sdvo_hdmi_sink_detect(connector, response);
}
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
@@ -1549,23 +1686,21 @@
static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_display_mode *newmode;
/*
* Attempt to get the mode list from DDC.
* Assume that the preferred modes are
* arranged in priority order.
*/
- /* set the bus switch and get the modes */
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
intel_ddc_get_modes(intel_output);
if (list_empty(&connector->probed_modes) == false)
- return;
+ goto end;
/* Fetch modes from VBT */
if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
- struct drm_display_mode *newmode;
newmode = drm_mode_duplicate(connector->dev,
dev_priv->sdvo_lvds_vbt_mode);
if (newmode != NULL) {
@@ -1575,6 +1710,16 @@
drm_mode_probed_add(connector, newmode);
}
}
+
+end:
+ list_for_each_entry(newmode, &connector->probed_modes, head) {
+ if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
+ sdvo_priv->sdvo_lvds_fixed_mode =
+ drm_mode_duplicate(connector->dev, newmode);
+ break;
+ }
+ }
+
}
static int intel_sdvo_get_modes(struct drm_connector *connector)
@@ -1597,14 +1742,20 @@
static void intel_sdvo_destroy(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
if (intel_output->i2c_bus)
intel_i2c_destroy(intel_output->i2c_bus);
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
+ if (sdvo_priv->sdvo_lvds_fixed_mode != NULL)
+ drm_mode_destroy(connector->dev,
+ sdvo_priv->sdvo_lvds_fixed_mode);
+
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
+
kfree(intel_output);
}
@@ -1709,7 +1860,7 @@
list_for_each_entry(connector,
&dev->mode_config.connector_list, head) {
- if (to_intel_output(connector)->ddc_bus == chan) {
+ if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
intel_output = to_intel_output(connector);
break;
}
@@ -1723,7 +1874,7 @@
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
struct i2c_algo_bit_data *algo_data;
- struct i2c_algorithm *algo;
+ const struct i2c_algorithm *algo;
algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
intel_output =
@@ -1733,7 +1884,7 @@
return -EINVAL;
sdvo_priv = intel_output->dev_priv;
- algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+ algo = intel_output->i2c_bus->algo;
intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
return algo->master_xfer(i2c_adap, msgs, num);
@@ -1780,18 +1931,101 @@
return 0x72;
}
+static bool
+intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
+{
+ struct drm_connector *connector = &intel_output->base;
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ bool ret = true, registered = false;
+
+ sdvo_priv->is_tv = false;
+ intel_output->needs_tv_clock = false;
+ sdvo_priv->is_lvds = false;
+
+ if (device_is_registered(&connector->kdev)) {
+ drm_sysfs_connector_remove(connector);
+ registered = true;
+ }
+
+ if (flags &
+ (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
+ if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+ sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
+ else
+ sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
+
+ encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_DVID;
+
+ if (intel_sdvo_get_supp_encode(intel_output,
+ &sdvo_priv->encode) &&
+ intel_sdvo_get_digital_encoding_mode(intel_output) &&
+ sdvo_priv->is_hdmi) {
+ /* enable hdmi encoding mode if supported */
+ intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
+ intel_sdvo_set_colorimetry(intel_output,
+ SDVO_COLORIMETRY_RGB256);
+ connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ }
+ } else if (flags & SDVO_OUTPUT_SVID0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
+ encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+ sdvo_priv->is_tv = true;
+ intel_output->needs_tv_clock = true;
+ } else if (flags & SDVO_OUTPUT_RGB0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
+ encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ } else if (flags & SDVO_OUTPUT_RGB1) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
+ encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ } else if (flags & SDVO_OUTPUT_LVDS0) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
+ encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
+ } else if (flags & SDVO_OUTPUT_LVDS1) {
+
+ sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
+ encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
+ } else {
+
+ unsigned char bytes[2];
+
+ sdvo_priv->controlled_output = 0;
+ memcpy(bytes, &sdvo_priv->caps.output_flags, 2);
+ DRM_DEBUG_KMS(I915_SDVO,
+ "%s: Unknown SDVO output type (0x%02x%02x)\n",
+ SDVO_NAME(sdvo_priv),
+ bytes[0], bytes[1]);
+ ret = false;
+ }
+
+ if (ret && registered)
+ ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
+
+
+ return ret;
+
+}
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
- struct intel_i2c_chan *i2cbus = NULL;
- struct intel_i2c_chan *ddcbus = NULL;
- int connector_type;
+
u8 ch[0x40];
int i;
- int encoder_type, output_id;
- u8 slave_addr;
intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
if (!intel_output) {
@@ -1799,29 +2033,24 @@
}
sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+ sdvo_priv->output_device = output_device;
+
+ intel_output->dev_priv = sdvo_priv;
intel_output->type = INTEL_OUTPUT_SDVO;
/* setup the DDC bus. */
if (output_device == SDVOB)
- i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+ intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
else
- i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+ intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
- if (!i2cbus)
+ if (!intel_output->i2c_bus)
goto err_inteloutput;
- slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
- sdvo_priv->i2c_bus = i2cbus;
+ sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
- if (output_device == SDVOB) {
- output_id = 1;
- } else {
- output_id = 2;
- }
- sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
- sdvo_priv->output_device = output_device;
- intel_output->i2c_bus = i2cbus;
- intel_output->dev_priv = sdvo_priv;
+ /* Save the bit-banging i2c functionality for use by the DDC wrapper */
+ intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
@@ -1835,101 +2064,39 @@
/* setup the DDC bus. */
if (output_device == SDVOB)
- ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
else
- ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
- if (ddcbus == NULL)
+ if (intel_output->ddc_bus == NULL)
goto err_i2c;
- intel_sdvo_i2c_bit_algo.functionality =
- intel_output->i2c_bus->adapter.algo->functionality;
- ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
- intel_output->ddc_bus = ddcbus;
+ /* Wrap with our custom algo which switches to DDC mode */
+ intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
/* In defaut case sdvo lvds is false */
- sdvo_priv->is_lvds = false;
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
- if (sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
- if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
- sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS0;
- else
- sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
-
- encoder_type = DRM_MODE_ENCODER_TMDS;
- connector_type = DRM_MODE_CONNECTOR_DVID;
-
- if (intel_sdvo_get_supp_encode(intel_output,
- &sdvo_priv->encode) &&
- intel_sdvo_get_digital_encoding_mode(intel_output) &&
- sdvo_priv->is_hdmi) {
- /* enable hdmi encoding mode if supported */
- intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
- intel_sdvo_set_colorimetry(intel_output,
- SDVO_COLORIMETRY_RGB256);
- connector_type = DRM_MODE_CONNECTOR_HDMIA;
- }
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
- encoder_type = DRM_MODE_ENCODER_TVDAC;
- connector_type = DRM_MODE_CONNECTOR_SVIDEO;
- sdvo_priv->is_tv = true;
- intel_output->needs_tv_clock = true;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
- encoder_type = DRM_MODE_ENCODER_DAC;
- connector_type = DRM_MODE_CONNECTOR_VGA;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
- encoder_type = DRM_MODE_ENCODER_LVDS;
- connector_type = DRM_MODE_CONNECTOR_LVDS;
- sdvo_priv->is_lvds = true;
- }
- else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
- {
- sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
- encoder_type = DRM_MODE_ENCODER_LVDS;
- connector_type = DRM_MODE_CONNECTOR_LVDS;
- sdvo_priv->is_lvds = true;
- }
- else
- {
- unsigned char bytes[2];
-
- sdvo_priv->controlled_output = 0;
- memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
- DRM_DEBUG_KMS(I915_SDVO,
- "%s: Unknown SDVO output type (0x%02x%02x)\n",
- SDVO_NAME(sdvo_priv),
- bytes[0], bytes[1]);
- encoder_type = DRM_MODE_ENCODER_NONE;
- connector_type = DRM_MODE_CONNECTOR_Unknown;
+ if (intel_sdvo_output_setup(intel_output,
+ sdvo_priv->caps.output_flags) != true) {
+ DRM_DEBUG("SDVO output failed to setup on SDVO%c\n",
+ output_device == SDVOB ? 'B' : 'C');
goto err_i2c;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
- connector_type);
+ connector->connector_type);
+
drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
+ drm_encoder_init(dev, &intel_output->enc,
+ &intel_sdvo_enc_funcs, intel_output->enc.encoder_type);
+
drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
@@ -1965,9 +2132,10 @@
return true;
err_i2c:
- if (ddcbus != NULL)
+ if (intel_output->ddc_bus != NULL)
intel_i2c_destroy(intel_output->ddc_bus);
- intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_output->i2c_bus != NULL)
+ intel_i2c_destroy(intel_output->i2c_bus);
err_inteloutput:
kfree(intel_output);
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index 193938b..ba5cdf8 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -715,6 +715,7 @@
#define SDVO_HBUF_TX_ONCE (2 << 6)
#define SDVO_HBUF_TX_VSYNC (3 << 6)
#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c
+#define SDVO_NEED_TO_STALL (1 << 7)
struct intel_sdvo_encode{
u8 dvi_rev;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea68992..da4ab4d 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1383,34 +1383,31 @@
/*
* Detect TV by polling)
*/
- if (intel_output->load_detect_temp) {
- /* TV not currently running, prod it with destructive detect */
- save_tv_dac = tv_dac;
- tv_ctl = I915_READ(TV_CTL);
- save_tv_ctl = tv_ctl;
- tv_ctl &= ~TV_ENC_ENABLE;
- tv_ctl &= ~TV_TEST_MODE_MASK;
- tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
- tv_dac &= ~TVDAC_SENSE_MASK;
- tv_dac &= ~DAC_A_MASK;
- tv_dac &= ~DAC_B_MASK;
- tv_dac &= ~DAC_C_MASK;
- tv_dac |= (TVDAC_STATE_CHG_EN |
- TVDAC_A_SENSE_CTL |
- TVDAC_B_SENSE_CTL |
- TVDAC_C_SENSE_CTL |
- DAC_CTL_OVERRIDE |
- DAC_A_0_7_V |
- DAC_B_0_7_V |
- DAC_C_0_7_V);
- I915_WRITE(TV_CTL, tv_ctl);
- I915_WRITE(TV_DAC, tv_dac);
- intel_wait_for_vblank(dev);
- tv_dac = I915_READ(TV_DAC);
- I915_WRITE(TV_DAC, save_tv_dac);
- I915_WRITE(TV_CTL, save_tv_ctl);
- intel_wait_for_vblank(dev);
- }
+ save_tv_dac = tv_dac;
+ tv_ctl = I915_READ(TV_CTL);
+ save_tv_ctl = tv_ctl;
+ tv_ctl &= ~TV_ENC_ENABLE;
+ tv_ctl &= ~TV_TEST_MODE_MASK;
+ tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+ tv_dac &= ~TVDAC_SENSE_MASK;
+ tv_dac &= ~DAC_A_MASK;
+ tv_dac &= ~DAC_B_MASK;
+ tv_dac &= ~DAC_C_MASK;
+ tv_dac |= (TVDAC_STATE_CHG_EN |
+ TVDAC_A_SENSE_CTL |
+ TVDAC_B_SENSE_CTL |
+ TVDAC_C_SENSE_CTL |
+ DAC_CTL_OVERRIDE |
+ DAC_A_0_7_V |
+ DAC_B_0_7_V |
+ DAC_C_0_7_V);
+ I915_WRITE(TV_CTL, tv_ctl);
+ I915_WRITE(TV_DAC, tv_dac);
+ intel_wait_for_vblank(dev);
+ tv_dac = I915_READ(TV_DAC);
+ I915_WRITE(TV_DAC, save_tv_dac);
+ I915_WRITE(TV_CTL, save_tv_ctl);
+ intel_wait_for_vblank(dev);
/*
* A B C
* 0 1 1 Composite
@@ -1493,6 +1490,27 @@
{"1920x1080", 1920, 1080},
};
+/*
+ * Chose preferred mode according to line number of TV format
+ */
+static void
+intel_tv_chose_preferred_modes(struct drm_connector *connector,
+ struct drm_display_mode *mode_ptr)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+
+ if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ else if (tv_mode->nbr_end > 480) {
+ if (tv_mode->progressive == true && tv_mode->nbr_end < 720) {
+ if (mode_ptr->vdisplay == 720)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ } else if (mode_ptr->vdisplay == 1080)
+ mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+ }
+}
+
/**
* Stub get_modes function.
*
@@ -1547,6 +1565,7 @@
mode_ptr->clock = (int) tmp;
mode_ptr->type = DRM_MODE_TYPE_DRIVER;
+ intel_tv_chose_preferred_modes(connector, mode_ptr);
drm_mode_probed_add(connector, mode_ptr);
count++;
}
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 5fae1e0..013d380 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -13,7 +13,8 @@
radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \
radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \
radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
- rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o
+ rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o \
+ radeon_test.o
radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c0080cc..74d034f 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -31,6 +31,132 @@
#include "atom.h"
#include "atom-bits.h"
+static void atombios_overscan_setup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ SET_CRTC_OVERSCAN_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
+ int a1, a2;
+
+ memset(&args, 0, sizeof(args));
+
+ args.usOverscanRight = 0;
+ args.usOverscanLeft = 0;
+ args.usOverscanBottom = 0;
+ args.usOverscanTop = 0;
+ args.ucCRTC = radeon_crtc->crtc_id;
+
+ switch (radeon_crtc->rmx_type) {
+ case RMX_CENTER:
+ args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+ args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+ args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+ args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ break;
+ case RMX_ASPECT:
+ a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
+ a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
+
+ if (a1 > a2) {
+ args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+ args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+ } else if (a2 > a1) {
+ args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+ args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+ }
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ break;
+ case RMX_FULL:
+ default:
+ args.usOverscanRight = 0;
+ args.usOverscanLeft = 0;
+ args.usOverscanBottom = 0;
+ args.usOverscanTop = 0;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ break;
+ }
+}
+
+static void atombios_scaler_setup(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ ENABLE_SCALER_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
+ /* fixme - fill in enc_priv for atom dac */
+ enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+ if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
+ return;
+
+ memset(&args, 0, sizeof(args));
+
+ args.ucScaler = radeon_crtc->crtc_id;
+
+ if (radeon_crtc->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+ switch (tv_std) {
+ case TV_STD_NTSC:
+ default:
+ args.ucTVStandard = ATOM_TV_NTSC;
+ break;
+ case TV_STD_PAL:
+ args.ucTVStandard = ATOM_TV_PAL;
+ break;
+ case TV_STD_PAL_M:
+ args.ucTVStandard = ATOM_TV_PALM;
+ break;
+ case TV_STD_PAL_60:
+ args.ucTVStandard = ATOM_TV_PAL60;
+ break;
+ case TV_STD_NTSC_J:
+ args.ucTVStandard = ATOM_TV_NTSCJ;
+ break;
+ case TV_STD_SCART_PAL:
+ args.ucTVStandard = ATOM_TV_PAL; /* ??? */
+ break;
+ case TV_STD_SECAM:
+ args.ucTVStandard = ATOM_TV_SECAM;
+ break;
+ case TV_STD_PAL_CN:
+ args.ucTVStandard = ATOM_TV_PALCN;
+ break;
+ }
+ args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+ } else if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT)) {
+ args.ucTVStandard = ATOM_TV_CV;
+ args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+ } else {
+ switch (radeon_crtc->rmx_type) {
+ case RMX_FULL:
+ args.ucEnable = ATOM_SCALER_EXPANSION;
+ break;
+ case RMX_CENTER:
+ args.ucEnable = ATOM_SCALER_CENTER;
+ break;
+ case RMX_ASPECT:
+ args.ucEnable = ATOM_SCALER_EXPANSION;
+ break;
+ default:
+ if (ASIC_IS_AVIVO(rdev))
+ args.ucEnable = ATOM_SCALER_DISABLE;
+ else
+ args.ucEnable = ATOM_SCALER_CENTER;
+ break;
+ }
+ }
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
+ && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
+ atom_rv515_force_tv_scaler(rdev);
+ }
+}
+
static void atombios_lock_crtc(struct drm_crtc *crtc, int lock)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -203,6 +329,12 @@
if (ASIC_IS_AVIVO(rdev)) {
uint32_t ss_cntl;
+ if ((rdev->family == CHIP_RS600) ||
+ (rdev->family == CHIP_RS690) ||
+ (rdev->family == CHIP_RS740))
+ pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+ RADEON_PLL_PREFER_CLOSEST_LOWER);
+
if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */
pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
@@ -321,7 +453,7 @@
struct drm_gem_object *obj;
struct drm_radeon_gem_object *obj_priv;
uint64_t fb_location;
- uint32_t fb_format, fb_pitch_pixels;
+ uint32_t fb_format, fb_pitch_pixels, tiling_flags;
if (!crtc->fb)
return -EINVAL;
@@ -358,7 +490,14 @@
return -EINVAL;
}
- /* TODO tiling */
+ radeon_object_get_tiling_flags(obj->driver_private,
+ &tiling_flags, NULL);
+ if (tiling_flags & RADEON_TILING_MACRO)
+ fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
+
+ if (tiling_flags & RADEON_TILING_MICRO)
+ fb_format |= AVIVO_D1GRPH_TILED;
+
if (radeon_crtc->crtc_id == 0)
WREG32(AVIVO_D1VGA_CONTROL, 0);
else
@@ -509,6 +648,9 @@
radeon_crtc_set_base(crtc, x, y, old_fb);
radeon_legacy_atom_set_surface(crtc);
}
+ atombios_overscan_setup(crtc, mode, adjusted_mode);
+ atombios_scaler_setup(crtc);
+ radeon_bandwidth_update(rdev);
return 0;
}
@@ -516,6 +658,8 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+ return false;
return true;
}
@@ -548,148 +692,3 @@
AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
-
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2)
-{
- struct radeon_device *rdev = dev->dev_private;
- fixed20_12 min_mem_eff;
- fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff;
- fixed20_12 sclk_ff, mclk_ff;
- uint32_t dc_lb_memory_split, temp;
-
- min_mem_eff.full = rfixed_const_8(0);
- if (rdev->disp_priority == 2) {
- uint32_t mc_init_misc_lat_timer = 0;
- if (rdev->family == CHIP_RV515)
- mc_init_misc_lat_timer =
- RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER);
- else if (rdev->family == CHIP_RS690)
- mc_init_misc_lat_timer =
- RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER);
-
- mc_init_misc_lat_timer &=
- ~(R300_MC_DISP1R_INIT_LAT_MASK <<
- R300_MC_DISP1R_INIT_LAT_SHIFT);
- mc_init_misc_lat_timer &=
- ~(R300_MC_DISP0R_INIT_LAT_MASK <<
- R300_MC_DISP0R_INIT_LAT_SHIFT);
-
- if (mode2)
- mc_init_misc_lat_timer |=
- (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
- if (mode1)
- mc_init_misc_lat_timer |=
- (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-
- if (rdev->family == CHIP_RV515)
- WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER,
- mc_init_misc_lat_timer);
- else if (rdev->family == CHIP_RS690)
- WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER,
- mc_init_misc_lat_timer);
- }
-
- /*
- * determine is there is enough bw for current mode
- */
- temp_ff.full = rfixed_const(100);
- mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
- mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
- sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
- sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
- temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
- temp_ff.full = rfixed_const(temp);
- mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
- mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-
- pix_clk.full = 0;
- pix_clk2.full = 0;
- peak_disp_bw.full = 0;
- if (mode1) {
- temp_ff.full = rfixed_const(1000);
- pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
- pix_clk.full = rfixed_div(pix_clk, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes1);
- peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
- }
- if (mode2) {
- temp_ff.full = rfixed_const(1000);
- pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
- pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes2);
- peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
- }
-
- if (peak_disp_bw.full >= mem_bw.full) {
- DRM_ERROR
- ("You may not have enough display bandwidth for current mode\n"
- "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
- printk("peak disp bw %d, mem_bw %d\n",
- rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw));
- }
-
- /*
- * Line Buffer Setup
- * There is a single line buffer shared by both display controllers.
- * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display
- * controllers. The paritioning can either be done manually or via one of four
- * preset allocations specified in bits 1:0:
- * 0 - line buffer is divided in half and shared between each display controller
- * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
- * 2 - D1 gets the whole buffer
- * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
- * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode.
- * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits
- * 14:4; D2 allocation follows D1.
- */
-
- /* is auto or manual better ? */
- dc_lb_memory_split =
- RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK;
- dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-#if 1
- /* auto */
- if (mode1 && mode2) {
- if (mode1->hdisplay > mode2->hdisplay) {
- if (mode1->hdisplay > 2560)
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
- else
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
- } else if (mode2->hdisplay > mode1->hdisplay) {
- if (mode2->hdisplay > 2560)
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
- else
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
- } else
- dc_lb_memory_split |=
- AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
- } else if (mode1) {
- dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY;
- } else if (mode2) {
- dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
- }
-#else
- /* manual */
- dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
- dc_lb_memory_split &=
- ~(AVIVO_DC_LB_DISP1_END_ADR_MASK <<
- AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
- if (mode1) {
- dc_lb_memory_split |=
- ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK)
- << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
- } else if (mode2) {
- dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
- }
-#endif
- WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split);
-}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index c550932..f1ba8ff 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -110,7 +110,7 @@
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr);
+ rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
return 0;
}
@@ -173,8 +173,12 @@
DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
}
/* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ /* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
+ * if the aperture is 64MB but we have 32MB VRAM
+ * we report only 32MB VRAM but we have to set MC_FB_LOCATION
+ * to 64MB, otherwise the gpu accidentially dies */
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -215,7 +219,6 @@
r100_pci_gart_disable(rdev);
/* Setup GPU memory space */
- rdev->mc.vram_location = 0xFFFFFFFFUL;
rdev->mc.gtt_location = 0xFFFFFFFFUL;
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
@@ -719,13 +722,14 @@
unsigned idx)
{
struct radeon_cs_chunk *ib_chunk = &p->chunks[p->chunk_ib_idx];
- uint32_t header = ib_chunk->kdata[idx];
+ uint32_t header;
if (idx >= ib_chunk->length_dw) {
DRM_ERROR("Can not parse packet at %d after CS end %d !\n",
idx, ib_chunk->length_dw);
return -EINVAL;
}
+ header = ib_chunk->kdata[idx];
pkt->idx = idx;
pkt->type = CP_PACKET_GET_TYPE(header);
pkt->count = CP_PACKET_GET_COUNT(header);
@@ -753,6 +757,102 @@
}
/**
+ * r100_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser: parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET0 - WAIT_UNTIL +_value
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT UNTIL packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_chunk *ib_chunk;
+ struct drm_mode_object *obj;
+ struct drm_crtc *crtc;
+ struct radeon_crtc *radeon_crtc;
+ struct radeon_cs_packet p3reloc, waitreloc;
+ int crtc_id;
+ int r;
+ uint32_t header, h_idx, reg;
+
+ ib_chunk = &p->chunks[p->chunk_ib_idx];
+
+ /* parse the wait until */
+ r = r100_cs_packet_parse(p, &waitreloc, p->idx);
+ if (r)
+ return r;
+
+ /* check its a wait until and only 1 count */
+ if (waitreloc.reg != RADEON_WAIT_UNTIL ||
+ waitreloc.count != 0) {
+ DRM_ERROR("vline wait had illegal wait until segment\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+ DRM_ERROR("vline wait had illegal wait until\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ /* jump over the NOP */
+ r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+ if (r)
+ return r;
+
+ h_idx = p->idx - 2;
+ p->idx += waitreloc.count;
+ p->idx += p3reloc.count;
+
+ header = ib_chunk->kdata[h_idx];
+ crtc_id = ib_chunk->kdata[h_idx + 5];
+ reg = ib_chunk->kdata[h_idx] >> 2;
+ mutex_lock(&p->rdev->ddev->mode_config.mutex);
+ obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+ if (!obj) {
+ DRM_ERROR("cannot find crtc %d\n", crtc_id);
+ r = -EINVAL;
+ goto out;
+ }
+ crtc = obj_to_crtc(obj);
+ radeon_crtc = to_radeon_crtc(crtc);
+ crtc_id = radeon_crtc->crtc_id;
+
+ if (!crtc->enabled) {
+ /* if the CRTC isn't enabled - we need to nop out the wait until */
+ ib_chunk->kdata[h_idx + 2] = PACKET2(0);
+ ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+ } else if (crtc_id == 1) {
+ switch (reg) {
+ case AVIVO_D1MODE_VLINE_START_END:
+ header &= R300_CP_PACKET0_REG_MASK;
+ header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+ break;
+ case RADEON_CRTC_GUI_TRIG_VLINE:
+ header &= R300_CP_PACKET0_REG_MASK;
+ header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
+ break;
+ default:
+ DRM_ERROR("unknown crtc reloc\n");
+ r = -EINVAL;
+ goto out;
+ }
+ ib_chunk->kdata[h_idx] = header;
+ ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+ }
+out:
+ mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+ return r;
+}
+
+/**
* r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3
* @parser: parser structure holding parsing context.
* @data: pointer to relocation data
@@ -814,6 +914,7 @@
unsigned idx;
bool onereg;
int r;
+ u32 tile_flags = 0;
ib = p->ib->ptr;
ib_chunk = &p->chunks[p->chunk_ib_idx];
@@ -825,6 +926,15 @@
}
for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
switch (reg) {
+ case RADEON_CRTC_GUI_TRIG_VLINE:
+ r = r100_cs_packet_parse_vline(p);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ break;
/* FIXME: only allow PACKET3 blit? easier to check for out of
* range access */
case RADEON_DST_PITCH_OFFSET:
@@ -838,7 +948,20 @@
}
tmp = ib_chunk->kdata[idx] & 0x003fffff;
tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
- ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_DST_TILE_MACRO;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ if (reg == RADEON_SRC_PITCH_OFFSET) {
+ DRM_ERROR("Cannot src blit from microtiled surface\n");
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
+ tile_flags |= RADEON_DST_TILE_MICRO;
+ }
+
+ tmp |= tile_flags;
+ ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
break;
case RADEON_RB3D_DEPTHOFFSET:
case RADEON_RB3D_COLOROFFSET:
@@ -869,6 +992,11 @@
case R300_TX_OFFSET_0+52:
case R300_TX_OFFSET_0+56:
case R300_TX_OFFSET_0+60:
+ /* rn50 has no 3D engine so fail on any 3d setup */
+ if (ASIC_IS_RN50(p->rdev)) {
+ DRM_ERROR("attempt to use RN50 3D engine failed\n");
+ return -EINVAL;
+ }
r = r100_cs_packet_next_reloc(p, &reloc);
if (r) {
DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
@@ -878,6 +1006,25 @@
}
ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
break;
+ case R300_RB3D_COLORPITCH0:
+ case RADEON_RB3D_COLORPITCH:
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_COLOR_TILE_ENABLE;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
+
+ tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp |= tile_flags;
+ ib[idx] = tmp;
+ break;
default:
/* FIXME: we don't want to allow anyothers packet */
break;
@@ -1256,29 +1403,100 @@
}
}
-void r100_vram_info(struct radeon_device *rdev)
+static u32 r100_get_accessible_vram(struct radeon_device *rdev)
{
- r100_vram_get_type(rdev);
+ u32 aper_size;
+ u8 byte;
+
+ aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
+
+ /* Set HDP_APER_CNTL only on cards that are known not to be broken,
+ * that is has the 2nd generation multifunction PCI interface
+ */
+ if (rdev->family == CHIP_RV280 ||
+ rdev->family >= CHIP_RV350) {
+ WREG32_P(RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL,
+ ~RADEON_HDP_APER_CNTL);
+ DRM_INFO("Generation 2 PCI interface, using max accessible memory\n");
+ return aper_size * 2;
+ }
+
+ /* Older cards have all sorts of funny issues to deal with. First
+ * check if it's a multifunction card by reading the PCI config
+ * header type... Limit those to one aperture size
+ */
+ pci_read_config_byte(rdev->pdev, 0xe, &byte);
+ if (byte & 0x80) {
+ DRM_INFO("Generation 1 PCI interface in multifunction mode\n");
+ DRM_INFO("Limiting VRAM to one aperture\n");
+ return aper_size;
+ }
+
+ /* Single function older card. We read HDP_APER_CNTL to see how the BIOS
+ * have set it up. We don't write this as it's broken on some ASICs but
+ * we expect the BIOS to have done the right thing (might be too optimistic...)
+ */
+ if (RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL)
+ return aper_size * 2;
+ return aper_size;
+}
+
+void r100_vram_init_sizes(struct radeon_device *rdev)
+{
+ u64 config_aper_size;
+ u32 accessible;
+
+ config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
if (rdev->flags & RADEON_IS_IGP) {
uint32_t tom;
/* read NB_TOM to get the amount of ram stolen for the GPU */
tom = RREG32(RADEON_NB_TOM);
- rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+ rdev->mc.real_vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+ /* for IGPs we need to keep VRAM where it was put by the BIOS */
+ rdev->mc.vram_location = (tom & 0xffff) << 16;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
} else {
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
/* Some production boards of m6 will report 0
* if it's 8 MB
*/
- if (rdev->mc.vram_size == 0) {
- rdev->mc.vram_size = 8192 * 1024;
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+ if (rdev->mc.real_vram_size == 0) {
+ rdev->mc.real_vram_size = 8192 * 1024;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
}
+ /* let driver place VRAM */
+ rdev->mc.vram_location = 0xFFFFFFFFUL;
+ /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM -
+ * Novell bug 204882 + along with lots of ubuntu ones */
+ if (config_aper_size > rdev->mc.real_vram_size)
+ rdev->mc.mc_vram_size = config_aper_size;
+ else
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
}
+ /* work out accessible VRAM */
+ accessible = r100_get_accessible_vram(rdev);
+
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+
+ if (accessible > rdev->mc.aper_size)
+ accessible = rdev->mc.aper_size;
+
+ if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+ rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+ if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+ rdev->mc.real_vram_size = rdev->mc.aper_size;
+}
+
+void r100_vram_info(struct radeon_device *rdev)
+{
+ r100_vram_get_type(rdev);
+
+ r100_vram_init_sizes(rdev);
}
@@ -1533,3 +1751,530 @@
return 0;
#endif
}
+
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+ uint32_t tiling_flags, uint32_t pitch,
+ uint32_t offset, uint32_t obj_size)
+{
+ int surf_index = reg * 16;
+ int flags = 0;
+
+ /* r100/r200 divide by 16 */
+ if (rdev->family < CHIP_R300)
+ flags = pitch / 16;
+ else
+ flags = pitch / 8;
+
+ if (rdev->family <= CHIP_RS200) {
+ if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+ == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+ flags |= RADEON_SURF_TILE_COLOR_BOTH;
+ if (tiling_flags & RADEON_TILING_MACRO)
+ flags |= RADEON_SURF_TILE_COLOR_MACRO;
+ } else if (rdev->family <= CHIP_RV280) {
+ if (tiling_flags & (RADEON_TILING_MACRO))
+ flags |= R200_SURF_TILE_COLOR_MACRO;
+ if (tiling_flags & RADEON_TILING_MICRO)
+ flags |= R200_SURF_TILE_COLOR_MICRO;
+ } else {
+ if (tiling_flags & RADEON_TILING_MACRO)
+ flags |= R300_SURF_TILE_MACRO;
+ if (tiling_flags & RADEON_TILING_MICRO)
+ flags |= R300_SURF_TILE_MICRO;
+ }
+
+ DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
+ WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
+ WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
+ WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1);
+ return 0;
+}
+
+void r100_clear_surface_reg(struct radeon_device *rdev, int reg)
+{
+ int surf_index = reg * 16;
+ WREG32(RADEON_SURFACE0_INFO + surf_index, 0);
+}
+
+void r100_bandwidth_update(struct radeon_device *rdev)
+{
+ fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
+ fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
+ fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
+ uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
+ fixed20_12 memtcas_ff[8] = {
+ fixed_init(1),
+ fixed_init(2),
+ fixed_init(3),
+ fixed_init(0),
+ fixed_init_half(1),
+ fixed_init_half(2),
+ fixed_init(0),
+ };
+ fixed20_12 memtcas_rs480_ff[8] = {
+ fixed_init(0),
+ fixed_init(1),
+ fixed_init(2),
+ fixed_init(3),
+ fixed_init(0),
+ fixed_init_half(1),
+ fixed_init_half(2),
+ fixed_init_half(3),
+ };
+ fixed20_12 memtcas2_ff[8] = {
+ fixed_init(0),
+ fixed_init(1),
+ fixed_init(2),
+ fixed_init(3),
+ fixed_init(4),
+ fixed_init(5),
+ fixed_init(6),
+ fixed_init(7),
+ };
+ fixed20_12 memtrbs[8] = {
+ fixed_init(1),
+ fixed_init_half(1),
+ fixed_init(2),
+ fixed_init_half(2),
+ fixed_init(3),
+ fixed_init_half(3),
+ fixed_init(4),
+ fixed_init_half(4)
+ };
+ fixed20_12 memtrbs_r4xx[8] = {
+ fixed_init(4),
+ fixed_init(5),
+ fixed_init(6),
+ fixed_init(7),
+ fixed_init(8),
+ fixed_init(9),
+ fixed_init(10),
+ fixed_init(11)
+ };
+ fixed20_12 min_mem_eff;
+ fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
+ fixed20_12 cur_latency_mclk, cur_latency_sclk;
+ fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
+ disp_drain_rate2, read_return_rate;
+ fixed20_12 time_disp1_drop_priority;
+ int c;
+ int cur_size = 16; /* in octawords */
+ int critical_point = 0, critical_point2;
+/* uint32_t read_return_rate, time_disp1_drop_priority; */
+ int stop_req, max_stop_req;
+ struct drm_display_mode *mode1 = NULL;
+ struct drm_display_mode *mode2 = NULL;
+ uint32_t pixel_bytes1 = 0;
+ uint32_t pixel_bytes2 = 0;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled) {
+ mode1 = &rdev->mode_info.crtcs[0]->base.mode;
+ pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
+ }
+ if (rdev->mode_info.crtcs[1]->base.enabled) {
+ mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+ pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+ }
+
+ min_mem_eff.full = rfixed_const_8(0);
+ /* get modes */
+ if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
+ uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
+ mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
+ mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
+ /* check crtc enables */
+ if (mode2)
+ mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+ if (mode1)
+ mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+ WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
+ }
+
+ /*
+ * determine is there is enough bw for current mode
+ */
+ mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+ temp_ff.full = rfixed_const(100);
+ mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+ sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+ sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+ temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+ temp_ff.full = rfixed_const(temp);
+ mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+
+ pix_clk.full = 0;
+ pix_clk2.full = 0;
+ peak_disp_bw.full = 0;
+ if (mode1) {
+ temp_ff.full = rfixed_const(1000);
+ pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
+ pix_clk.full = rfixed_div(pix_clk, temp_ff);
+ temp_ff.full = rfixed_const(pixel_bytes1);
+ peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+ }
+ if (mode2) {
+ temp_ff.full = rfixed_const(1000);
+ pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
+ pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+ temp_ff.full = rfixed_const(pixel_bytes2);
+ peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+ }
+
+ mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+ if (peak_disp_bw.full >= mem_bw.full) {
+ DRM_ERROR("You may not have enough display bandwidth for current mode\n"
+ "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+ }
+
+ /* Get values from the EXT_MEM_CNTL register...converting its contents. */
+ temp = RREG32(RADEON_MEM_TIMING_CNTL);
+ if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
+ mem_trcd = ((temp >> 2) & 0x3) + 1;
+ mem_trp = ((temp & 0x3)) + 1;
+ mem_tras = ((temp & 0x70) >> 4) + 1;
+ } else if (rdev->family == CHIP_R300 ||
+ rdev->family == CHIP_R350) { /* r300, r350 */
+ mem_trcd = (temp & 0x7) + 1;
+ mem_trp = ((temp >> 8) & 0x7) + 1;
+ mem_tras = ((temp >> 11) & 0xf) + 4;
+ } else if (rdev->family == CHIP_RV350 ||
+ rdev->family <= CHIP_RV380) {
+ /* rv3x0 */
+ mem_trcd = (temp & 0x7) + 3;
+ mem_trp = ((temp >> 8) & 0x7) + 3;
+ mem_tras = ((temp >> 11) & 0xf) + 6;
+ } else if (rdev->family == CHIP_R420 ||
+ rdev->family == CHIP_R423 ||
+ rdev->family == CHIP_RV410) {
+ /* r4xx */
+ mem_trcd = (temp & 0xf) + 3;
+ if (mem_trcd > 15)
+ mem_trcd = 15;
+ mem_trp = ((temp >> 8) & 0xf) + 3;
+ if (mem_trp > 15)
+ mem_trp = 15;
+ mem_tras = ((temp >> 12) & 0x1f) + 6;
+ if (mem_tras > 31)
+ mem_tras = 31;
+ } else { /* RV200, R200 */
+ mem_trcd = (temp & 0x7) + 1;
+ mem_trp = ((temp >> 8) & 0x7) + 1;
+ mem_tras = ((temp >> 12) & 0xf) + 4;
+ }
+ /* convert to FF */
+ trcd_ff.full = rfixed_const(mem_trcd);
+ trp_ff.full = rfixed_const(mem_trp);
+ tras_ff.full = rfixed_const(mem_tras);
+
+ /* Get values from the MEM_SDRAM_MODE_REG register...converting its */
+ temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+ data = (temp & (7 << 20)) >> 20;
+ if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
+ if (rdev->family == CHIP_RS480) /* don't think rs400 */
+ tcas_ff = memtcas_rs480_ff[data];
+ else
+ tcas_ff = memtcas_ff[data];
+ } else
+ tcas_ff = memtcas2_ff[data];
+
+ if (rdev->family == CHIP_RS400 ||
+ rdev->family == CHIP_RS480) {
+ /* extra cas latency stored in bits 23-25 0-4 clocks */
+ data = (temp >> 23) & 0x7;
+ if (data < 5)
+ tcas_ff.full += rfixed_const(data);
+ }
+
+ if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
+ /* on the R300, Tcas is included in Trbs.
+ */
+ temp = RREG32(RADEON_MEM_CNTL);
+ data = (R300_MEM_NUM_CHANNELS_MASK & temp);
+ if (data == 1) {
+ if (R300_MEM_USE_CD_CH_ONLY & temp) {
+ temp = RREG32(R300_MC_IND_INDEX);
+ temp &= ~R300_MC_IND_ADDR_MASK;
+ temp |= R300_MC_READ_CNTL_CD_mcind;
+ WREG32(R300_MC_IND_INDEX, temp);
+ temp = RREG32(R300_MC_IND_DATA);
+ data = (R300_MEM_RBS_POSITION_C_MASK & temp);
+ } else {
+ temp = RREG32(R300_MC_READ_CNTL_AB);
+ data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+ }
+ } else {
+ temp = RREG32(R300_MC_READ_CNTL_AB);
+ data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+ }
+ if (rdev->family == CHIP_RV410 ||
+ rdev->family == CHIP_R420 ||
+ rdev->family == CHIP_R423)
+ trbs_ff = memtrbs_r4xx[data];
+ else
+ trbs_ff = memtrbs[data];
+ tcas_ff.full += trbs_ff.full;
+ }
+
+ sclk_eff_ff.full = sclk_ff.full;
+
+ if (rdev->flags & RADEON_IS_AGP) {
+ fixed20_12 agpmode_ff;
+ agpmode_ff.full = rfixed_const(radeon_agpmode);
+ temp_ff.full = rfixed_const_666(16);
+ sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
+ }
+ /* TODO PCIE lanes may affect this - agpmode == 16?? */
+
+ if (ASIC_IS_R300(rdev)) {
+ sclk_delay_ff.full = rfixed_const(250);
+ } else {
+ if ((rdev->family == CHIP_RV100) ||
+ rdev->flags & RADEON_IS_IGP) {
+ if (rdev->mc.vram_is_ddr)
+ sclk_delay_ff.full = rfixed_const(41);
+ else
+ sclk_delay_ff.full = rfixed_const(33);
+ } else {
+ if (rdev->mc.vram_width == 128)
+ sclk_delay_ff.full = rfixed_const(57);
+ else
+ sclk_delay_ff.full = rfixed_const(41);
+ }
+ }
+
+ mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
+
+ if (rdev->mc.vram_is_ddr) {
+ if (rdev->mc.vram_width == 32) {
+ k1.full = rfixed_const(40);
+ c = 3;
+ } else {
+ k1.full = rfixed_const(20);
+ c = 1;
+ }
+ } else {
+ k1.full = rfixed_const(40);
+ c = 3;
+ }
+
+ temp_ff.full = rfixed_const(2);
+ mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
+ temp_ff.full = rfixed_const(c);
+ mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
+ temp_ff.full = rfixed_const(4);
+ mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
+ mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
+ mc_latency_mclk.full += k1.full;
+
+ mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
+ mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
+
+ /*
+ HW cursor time assuming worst case of full size colour cursor.
+ */
+ temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
+ temp_ff.full += trcd_ff.full;
+ if (temp_ff.full < tras_ff.full)
+ temp_ff.full = tras_ff.full;
+ cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
+
+ temp_ff.full = rfixed_const(cur_size);
+ cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
+ /*
+ Find the total latency for the display data.
+ */
+ disp_latency_overhead.full = rfixed_const(80);
+ disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
+ mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
+ mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
+
+ if (mc_latency_mclk.full > mc_latency_sclk.full)
+ disp_latency.full = mc_latency_mclk.full;
+ else
+ disp_latency.full = mc_latency_sclk.full;
+
+ /* setup Max GRPH_STOP_REQ default value */
+ if (ASIC_IS_RV100(rdev))
+ max_stop_req = 0x5c;
+ else
+ max_stop_req = 0x7c;
+
+ if (mode1) {
+ /* CRTC1
+ Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
+ GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
+ */
+ stop_req = mode1->hdisplay * pixel_bytes1 / 16;
+
+ if (stop_req > max_stop_req)
+ stop_req = max_stop_req;
+
+ /*
+ Find the drain rate of the display buffer.
+ */
+ temp_ff.full = rfixed_const((16/pixel_bytes1));
+ disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
+
+ /*
+ Find the critical point of the display buffer.
+ */
+ crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
+ crit_point_ff.full += rfixed_const_half(0);
+
+ critical_point = rfixed_trunc(crit_point_ff);
+
+ if (rdev->disp_priority == 2) {
+ critical_point = 0;
+ }
+
+ /*
+ The critical point should never be above max_stop_req-4. Setting
+ GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
+ */
+ if (max_stop_req - critical_point < 4)
+ critical_point = 0;
+
+ if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
+ /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
+ critical_point = 0x10;
+ }
+
+ temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
+ temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
+ temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+ temp &= ~(RADEON_GRPH_START_REQ_MASK);
+ if ((rdev->family == CHIP_R350) &&
+ (stop_req > 0x15)) {
+ stop_req -= 0x10;
+ }
+ temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+ temp |= RADEON_GRPH_BUFFER_SIZE;
+ temp &= ~(RADEON_GRPH_CRITICAL_CNTL |
+ RADEON_GRPH_CRITICAL_AT_SOF |
+ RADEON_GRPH_STOP_CNTL);
+ /*
+ Write the result into the register.
+ */
+ WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+ (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+#if 0
+ if ((rdev->family == CHIP_RS400) ||
+ (rdev->family == CHIP_RS480)) {
+ /* attempt to program RS400 disp regs correctly ??? */
+ temp = RREG32(RS400_DISP1_REG_CNTL);
+ temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
+ RS400_DISP1_STOP_REQ_LEVEL_MASK);
+ WREG32(RS400_DISP1_REQ_CNTL1, (temp |
+ (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+ (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+ temp = RREG32(RS400_DMIF_MEM_CNTL1);
+ temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
+ RS400_DISP1_CRITICAL_POINT_STOP_MASK);
+ WREG32(RS400_DMIF_MEM_CNTL1, (temp |
+ (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
+ (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
+ }
+#endif
+
+ DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+ /* (unsigned int)info->SavedReg->grph_buffer_cntl, */
+ (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
+ }
+
+ if (mode2) {
+ u32 grph2_cntl;
+ stop_req = mode2->hdisplay * pixel_bytes2 / 16;
+
+ if (stop_req > max_stop_req)
+ stop_req = max_stop_req;
+
+ /*
+ Find the drain rate of the display buffer.
+ */
+ temp_ff.full = rfixed_const((16/pixel_bytes2));
+ disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
+
+ grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
+ grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
+ grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+ grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
+ if ((rdev->family == CHIP_R350) &&
+ (stop_req > 0x15)) {
+ stop_req -= 0x10;
+ }
+ grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+ grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
+ grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL |
+ RADEON_GRPH_CRITICAL_AT_SOF |
+ RADEON_GRPH_STOP_CNTL);
+
+ if ((rdev->family == CHIP_RS100) ||
+ (rdev->family == CHIP_RS200))
+ critical_point2 = 0;
+ else {
+ temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
+ temp_ff.full = rfixed_const(temp);
+ temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
+ if (sclk_ff.full < temp_ff.full)
+ temp_ff.full = sclk_ff.full;
+
+ read_return_rate.full = temp_ff.full;
+
+ if (mode1) {
+ temp_ff.full = read_return_rate.full - disp_drain_rate.full;
+ time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
+ } else {
+ time_disp1_drop_priority.full = 0;
+ }
+ crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
+ crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
+ crit_point_ff.full += rfixed_const_half(0);
+
+ critical_point2 = rfixed_trunc(crit_point_ff);
+
+ if (rdev->disp_priority == 2) {
+ critical_point2 = 0;
+ }
+
+ if (max_stop_req - critical_point2 < 4)
+ critical_point2 = 0;
+
+ }
+
+ if (critical_point2 == 0 && rdev->family == CHIP_R300) {
+ /* some R300 cards have problem with this set to 0 */
+ critical_point2 = 0x10;
+ }
+
+ WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+ (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+ if ((rdev->family == CHIP_RS400) ||
+ (rdev->family == CHIP_RS480)) {
+#if 0
+ /* attempt to program RS400 disp2 regs correctly ??? */
+ temp = RREG32(RS400_DISP2_REQ_CNTL1);
+ temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
+ RS400_DISP2_STOP_REQ_LEVEL_MASK);
+ WREG32(RS400_DISP2_REQ_CNTL1, (temp |
+ (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+ (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+ temp = RREG32(RS400_DISP2_REQ_CNTL2);
+ temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
+ RS400_DISP2_CRITICAL_POINT_STOP_MASK);
+ WREG32(RS400_DISP2_REQ_CNTL2, (temp |
+ (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
+ (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
+#endif
+ WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
+ WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
+ WREG32(RS400_DMIF_MEM_CNTL1, 0x29CA71DC);
+ WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
+ }
+
+ DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+ (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
+ }
+}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index e2ed5bc..9c8d415 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -30,6 +30,8 @@
#include "drm.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_drm.h"
+#include "radeon_share.h"
/* r300,r350,rv350,rv370,rv380 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
@@ -44,6 +46,7 @@
int r100_cs_packet_parse(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt,
unsigned idx);
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
struct radeon_cs_reloc **cs_reloc);
int r100_cs_parse_packet0(struct radeon_cs_parser *p,
@@ -150,8 +153,13 @@
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC;
- writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4));
+ addr = (lower_32_bits(addr) >> 8) |
+ ((upper_32_bits(addr) & 0xff) << 24) |
+ 0xc;
+ /* on x86 we want this to be CPU endian, on powerpc
+ * on powerpc without HW swappers, it'll get swapped on way
+ * into VRAM - so no need for cpu_to_le32 on VRAM tables */
+ writel(addr, ((void __iomem *)ptr) + (i * 4));
return 0;
}
@@ -579,10 +587,8 @@
} else {
rdev->mc.vram_width = 64;
}
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r100_vram_init_sizes(rdev);
}
@@ -970,7 +976,7 @@
static const unsigned r300_reg_safe_bm[159] = {
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -1019,7 +1025,7 @@
struct radeon_cs_reloc *reloc;
struct r300_cs_track *track;
volatile uint32_t *ib;
- uint32_t tmp;
+ uint32_t tmp, tile_flags = 0;
unsigned i;
int r;
@@ -1027,6 +1033,16 @@
ib_chunk = &p->chunks[p->chunk_ib_idx];
track = (struct r300_cs_track*)p->track;
switch(reg) {
+ case AVIVO_D1MODE_VLINE_START_END:
+ case RADEON_CRTC_GUI_TRIG_VLINE:
+ r = r100_cs_packet_parse_vline(p);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ break;
case RADEON_DST_PITCH_OFFSET:
case RADEON_SRC_PITCH_OFFSET:
r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1038,7 +1054,19 @@
}
tmp = ib_chunk->kdata[idx] & 0x003fffff;
tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
- ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= RADEON_DST_TILE_MACRO;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+ if (reg == RADEON_SRC_PITCH_OFFSET) {
+ DRM_ERROR("Cannot src blit from microtiled surface\n");
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
+ tile_flags |= RADEON_DST_TILE_MICRO;
+ }
+ tmp |= tile_flags;
+ ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
break;
case R300_RB3D_COLOROFFSET0:
case R300_RB3D_COLOROFFSET1:
@@ -1127,6 +1155,23 @@
/* RB3D_COLORPITCH1 */
/* RB3D_COLORPITCH2 */
/* RB3D_COLORPITCH3 */
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= R300_COLOR_TILE_ENABLE;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+
+ tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp |= tile_flags;
+ ib[idx] = tmp;
+
i = (reg - 0x4E38) >> 2;
track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
@@ -1182,6 +1227,23 @@
break;
case 0x4F24:
/* ZB_DEPTHPITCH */
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+ tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+ if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+ tile_flags |= R300_DEPTHMICROTILE_TILED;;
+
+ tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp |= tile_flags;
+ ib[idx] = tmp;
+
track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
break;
case 0x4104:
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 70f4860..4b7afef 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -27,7 +27,9 @@
#ifndef _R300_REG_H_
#define _R300_REG_H_
-
+#define R300_SURF_TILE_MACRO (1<<16)
+#define R300_SURF_TILE_MICRO (2<<16)
+#define R300_SURF_TILE_BOTH (3<<16)
#define R300_MC_INIT_MISC_LAT_TIMER 0x180
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index 9070a1c..036691b 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -445,6 +445,7 @@
#define AVIVO_D1MODE_DATA_FORMAT 0x6528
# define AVIVO_D1MODE_INTERLEAVE_EN (1 << 0)
#define AVIVO_D1MODE_DESKTOP_HEIGHT 0x652C
+#define AVIVO_D1MODE_VLINE_START_END 0x6538
#define AVIVO_D1MODE_VIEWPORT_START 0x6580
#define AVIVO_D1MODE_VIEWPORT_SIZE 0x6584
#define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6588
@@ -496,6 +497,7 @@
#define AVIVO_D2CUR_SIZE 0x6c10
#define AVIVO_D2CUR_POSITION 0x6c14
+#define AVIVO_D2MODE_VLINE_START_END 0x6d38
#define AVIVO_D2MODE_VIEWPORT_START 0x6d80
#define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84
#define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6d88
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 570a244..09fb0b6 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -28,6 +28,7 @@
#include "drmP.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_share.h"
/* r520,rv530,rv560,rv570,r580 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
@@ -94,8 +95,8 @@
"programming pipes. Bad things might happen.\n");
}
/* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32_MC(R520_MC_FB_LOCATION, tmp);
@@ -226,9 +227,20 @@
void r520_vram_info(struct radeon_device *rdev)
{
- r520_vram_get_type(rdev);
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ fixed20_12 a;
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r520_vram_get_type(rdev);
+
+ r100_vram_init_sizes(rdev);
+ /* FIXME: we should enforce default clock in case GPU is not in
+ * default setup
+ */
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void r520_bandwidth_update(struct radeon_device *rdev)
+{
+ rv515_bandwidth_avivo_update(rdev);
}
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c45559f..538cd90 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -67,7 +67,7 @@
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24);
tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24);
WREG32(R600_MC_VM_FB_LOCATION, tmp);
@@ -140,7 +140,8 @@
void r600_vram_info(struct radeon_device *rdev)
{
r600_vram_get_type(rdev);
- rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE);
+ rdev->mc.real_vram_size = RREG32(R600_CONFIG_MEMSIZE);
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
/* Could aper size report 0 ? */
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index 146f357..20f1790 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -384,8 +384,9 @@
DRM_INFO("Loading RV670 PFP Microcode\n");
for (i = 0; i < PFP_UCODE_SIZE; i++)
RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RV670_pfp_microcode[i]);
- } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
- DRM_INFO("Loading RS780 CP Microcode\n");
+ } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
+ DRM_INFO("Loading RS780/RS880 CP Microcode\n");
for (i = 0; i < PM4_UCODE_SIZE; i++) {
RADEON_WRITE(R600_CP_ME_RAM_DATA,
RS780_cp_microcode[i][0]);
@@ -396,7 +397,7 @@
}
RADEON_WRITE(R600_CP_PFP_UCODE_ADDR, 0);
- DRM_INFO("Loading RS780 PFP Microcode\n");
+ DRM_INFO("Loading RS780/RS880 PFP Microcode\n");
for (i = 0; i < PFP_UCODE_SIZE; i++)
RADEON_WRITE(R600_CP_PFP_UCODE_DATA, RS780_pfp_microcode[i]);
}
@@ -783,6 +784,7 @@
break;
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
dev_priv->r600_max_pipes = 1;
dev_priv->r600_max_tile_pipes = 1;
@@ -917,7 +919,8 @@
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV630) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
RADEON_WRITE(R600_DB_DEBUG, R600_PREZ_MUST_WAIT_FOR_POSTZ_DONE);
else
RADEON_WRITE(R600_DB_DEBUG, 0);
@@ -935,7 +938,8 @@
sq_ms_fifo_sizes = RADEON_READ(R600_SQ_MS_FIFO_SIZES);
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
sq_ms_fifo_sizes = (R600_CACHE_FIFO_SIZE(0xa) |
R600_FETCH_FIFO_HIWATER(0xa) |
R600_DONE_FIFO_HIWATER(0xe0) |
@@ -978,7 +982,8 @@
R600_NUM_ES_STACK_ENTRIES(0));
} else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780)) {
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880)) {
/* no vertex cache */
sq_config &= ~R600_VC_ENABLE;
@@ -1035,7 +1040,8 @@
if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV610) ||
((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV620) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780))
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS780) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS880))
RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_TC_ONLY));
else
RADEON_WRITE(R600_VGT_CACHE_INVALIDATION, R600_CACHE_INVALIDATION(R600_VC_AND_TC));
@@ -1078,6 +1084,7 @@
break;
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
gs_prim_buffer_depth = 32;
break;
@@ -1123,6 +1130,7 @@
switch (dev_priv->flags & RADEON_FAMILY_MASK) {
case CHIP_RV610:
case CHIP_RS780:
+ case CHIP_RS880:
case CHIP_RV620:
tc_cntl = R600_TC_L2_SIZE(8);
break;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index d61f2fc..b1d945b 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -64,6 +64,7 @@
extern int radeon_vram_limit;
extern int radeon_gart_size;
extern int radeon_benchmarking;
+extern int radeon_testing;
extern int radeon_connector_table;
/*
@@ -113,6 +114,7 @@
CHIP_RV770,
CHIP_RV730,
CHIP_RV710,
+ CHIP_RS880,
CHIP_LAST,
};
@@ -201,6 +203,14 @@
struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence);
void radeon_fence_unref(struct radeon_fence **fence);
+/*
+ * Tiling registers
+ */
+struct radeon_surface_reg {
+ struct radeon_object *robj;
+};
+
+#define RADEON_GEM_MAX_SURFACES 8
/*
* Radeon buffer.
@@ -213,6 +223,7 @@
uint64_t gpu_offset;
unsigned rdomain;
unsigned wdomain;
+ uint32_t tiling_flags;
};
int radeon_object_init(struct radeon_device *rdev);
@@ -242,8 +253,15 @@
int radeon_object_fbdev_mmap(struct radeon_object *robj,
struct vm_area_struct *vma);
unsigned long radeon_object_size(struct radeon_object *robj);
-
-
+void radeon_object_clear_surface_reg(struct radeon_object *robj);
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+ bool force_drop);
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+ uint32_t tiling_flags, uint32_t pitch);
+void radeon_object_get_tiling_flags(struct radeon_object *robj, uint32_t *tiling_flags, uint32_t *pitch);
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *mem);
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
/*
* GEM objects.
*/
@@ -315,8 +333,11 @@
unsigned gtt_location;
unsigned gtt_size;
unsigned vram_location;
- unsigned vram_size;
+ /* for some chips with <= 32MB we need to lie
+ * about vram size near mc fb location */
+ unsigned mc_vram_size;
unsigned vram_width;
+ unsigned real_vram_size;
int vram_mtrr;
bool vram_is_ddr;
};
@@ -474,6 +495,39 @@
uint64_t gpu_addr;
};
+/**
+ * struct radeon_pm - power management datas
+ * @max_bandwidth: maximum bandwidth the gpu has (MByte/s)
+ * @igp_sideport_mclk: sideport memory clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_system_mclk: system clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_clk: ht link clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_width: ht link width in bits (rs690,rs740,rs780,rs880)
+ * @k8_bandwidth: k8 bandwidth the gpu has (MByte/s) (IGP)
+ * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
+ * @ht_bandwidth: ht bandwidth the gpu has (MByte/s) (IGP)
+ * @core_bandwidth: core GPU bandwidth the gpu has (MByte/s) (IGP)
+ * @sclk: GPU clock Mhz (core bandwith depends of this clock)
+ * @needed_bandwidth: current bandwidth needs
+ *
+ * It keeps track of various data needed to take powermanagement decision.
+ * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Equation between gpu/memory clock and available bandwidth is hw dependent
+ * (type of memory, bus size, efficiency, ...)
+ */
+struct radeon_pm {
+ fixed20_12 max_bandwidth;
+ fixed20_12 igp_sideport_mclk;
+ fixed20_12 igp_system_mclk;
+ fixed20_12 igp_ht_link_clk;
+ fixed20_12 igp_ht_link_width;
+ fixed20_12 k8_bandwidth;
+ fixed20_12 sideport_bandwidth;
+ fixed20_12 ht_bandwidth;
+ fixed20_12 core_bandwidth;
+ fixed20_12 sclk;
+ fixed20_12 needed_bandwidth;
+};
+
/*
* Benchmarking
@@ -482,6 +536,12 @@
/*
+ * Testing
+ */
+void radeon_test_moves(struct radeon_device *rdev);
+
+
+/*
* Debugfs
*/
int radeon_debugfs_add_files(struct radeon_device *rdev,
@@ -535,6 +595,11 @@
void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
void (*set_clock_gating)(struct radeon_device *rdev, int enable);
+ int (*set_surface_reg)(struct radeon_device *rdev, int reg,
+ uint32_t tiling_flags, uint32_t pitch,
+ uint32_t offset, uint32_t obj_size);
+ int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
+ void (*bandwidth_update)(struct radeon_device *rdev);
};
union radeon_asic_config {
@@ -566,6 +631,10 @@
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp);
int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp);
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp);
/*
@@ -594,8 +663,8 @@
struct radeon_object *fbdev_robj;
struct radeon_framebuffer *fbdev_rfb;
/* Register mmio */
- unsigned long rmmio_base;
- unsigned long rmmio_size;
+ resource_size_t rmmio_base;
+ resource_size_t rmmio_size;
void *rmmio;
radeon_rreg_t mm_rreg;
radeon_wreg_t mm_wreg;
@@ -619,11 +688,14 @@
struct radeon_irq irq;
struct radeon_asic *asic;
struct radeon_gem gem;
+ struct radeon_pm pm;
struct mutex cs_mutex;
struct radeon_wb wb;
bool gpu_lockup;
bool shutdown;
bool suspend;
+ bool need_dma32;
+ struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
};
int radeon_device_init(struct radeon_device *rdev,
@@ -670,6 +742,8 @@
/*
* ASICs helpers.
*/
+#define ASIC_IS_RN50(rdev) ((rdev->pdev->device == 0x515e) || \
+ (rdev->pdev->device == 0x5969))
#define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \
(rdev->family == CHIP_RV200) || \
(rdev->family == CHIP_RS100) || \
@@ -796,5 +870,8 @@
#define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
#define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
#define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
+#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
+#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
+#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
#endif
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index e2e5673..9a75876 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -71,6 +71,11 @@
uint64_t dst_offset,
unsigned num_pages,
struct radeon_fence *fence);
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+ uint32_t tiling_flags, uint32_t pitch,
+ uint32_t offset, uint32_t obj_size);
+int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r100_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic r100_asic = {
.init = &r100_init,
@@ -100,6 +105,9 @@
.set_memory_clock = NULL,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
@@ -128,6 +136,7 @@
uint64_t dst_offset,
unsigned num_pages,
struct radeon_fence *fence);
+
static struct radeon_asic r300_asic = {
.init = &r300_init,
.errata = &r300_errata,
@@ -156,6 +165,9 @@
.set_memory_clock = NULL,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
/*
@@ -193,6 +205,9 @@
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
@@ -237,6 +252,9 @@
.set_memory_clock = NULL,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
};
@@ -254,6 +272,7 @@
int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs600_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs600_asic = {
.init = &r300_init,
.errata = &rs600_errata,
@@ -282,6 +301,7 @@
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .bandwidth_update = &rs600_bandwidth_update,
};
@@ -294,6 +314,7 @@
void rs690_mc_fini(struct radeon_device *rdev);
uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs690_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs690_asic = {
.init = &r300_init,
.errata = &rs690_errata,
@@ -322,6 +343,9 @@
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rs690_bandwidth_update,
};
@@ -339,6 +363,7 @@
void rv515_ring_start(struct radeon_device *rdev);
uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv515_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rv515_asic = {
.init = &rv515_init,
.errata = &rv515_errata,
@@ -367,6 +392,9 @@
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rv515_bandwidth_update,
};
@@ -377,6 +405,7 @@
void r520_vram_info(struct radeon_device *rdev);
int r520_mc_init(struct radeon_device *rdev);
void r520_mc_fini(struct radeon_device *rdev);
+void r520_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic r520_asic = {
.init = &rv515_init,
.errata = &r520_errata,
@@ -405,6 +434,9 @@
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r520_bandwidth_update,
};
/*
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 1f5a1a4..fcfe5c0 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -103,7 +103,8 @@
static bool radeon_atom_apply_quirks(struct drm_device *dev,
uint32_t supported_device,
int *connector_type,
- struct radeon_i2c_bus_rec *i2c_bus)
+ struct radeon_i2c_bus_rec *i2c_bus,
+ uint8_t *line_mux)
{
/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
@@ -127,8 +128,10 @@
if ((dev->pdev->device == 0x5653) &&
(dev->pdev->subsystem_vendor == 0x1462) &&
(dev->pdev->subsystem_device == 0x0291)) {
- if (*connector_type == DRM_MODE_CONNECTOR_LVDS)
+ if (*connector_type == DRM_MODE_CONNECTOR_LVDS) {
i2c_bus->valid = false;
+ *line_mux = 53;
+ }
}
/* Funky macbooks */
@@ -526,7 +529,7 @@
if (!radeon_atom_apply_quirks
(dev, (1 << i), &bios_connectors[i].connector_type,
- &bios_connectors[i].ddc_bus))
+ &bios_connectors[i].ddc_bus, &bios_connectors[i].line_mux))
continue;
bios_connectors[i].valid = true;
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index c44403a..2e938f7 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -63,7 +63,7 @@
if (r) {
goto out_cleanup;
}
- r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence);
+ r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence);
if (r) {
goto out_cleanup;
}
@@ -88,7 +88,7 @@
if (r) {
goto out_cleanup;
}
- r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence);
+ r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence);
if (r) {
goto out_cleanup;
}
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index b843f9b..a169067 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -127,17 +127,23 @@
sizeof(struct drm_radeon_cs_chunk))) {
return -EFAULT;
}
+ p->chunks[i].length_dw = user_chunk.length_dw;
+ p->chunks[i].kdata = NULL;
p->chunks[i].chunk_id = user_chunk.chunk_id;
+
if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) {
p->chunk_relocs_idx = i;
}
if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) {
p->chunk_ib_idx = i;
+ /* zero length IB isn't useful */
+ if (p->chunks[i].length_dw == 0)
+ return -EINVAL;
}
+
p->chunks[i].length_dw = user_chunk.length_dw;
cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
- p->chunks[i].kdata = NULL;
size = p->chunks[i].length_dw * sizeof(uint32_t);
p->chunks[i].kdata = kzalloc(size, GFP_KERNEL);
if (p->chunks[i].kdata == NULL) {
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 5232441..b13c79e 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -111,9 +111,11 @@
if (ASIC_IS_AVIVO(rdev))
WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
- else
+ else {
+ radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr;
/* offset is from DISP(2)_BASE_ADDRESS */
- WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr);
+ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset);
+ }
}
int radeon_crtc_cursor_set(struct drm_crtc *crtc,
@@ -245,6 +247,9 @@
(RADEON_CUR_LOCK
| ((xorigin ? 0 : x) << 16)
| (yorigin ? 0 : y)));
+ /* offset is from DISP(2)_BASE_ADDRESS */
+ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
+ (yorigin * 256)));
}
radeon_lock_cursor(crtc, false);
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f30aa72..9ff6dcb 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -35,6 +35,25 @@
#include "atom.h"
/*
+ * Clear GPU surface registers.
+ */
+static void radeon_surface_init(struct radeon_device *rdev)
+{
+ /* FIXME: check this out */
+ if (rdev->family < CHIP_R600) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ WREG32(RADEON_SURFACE0_INFO +
+ i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
+ 0);
+ }
+ /* enable surfaces */
+ WREG32(RADEON_SURFACE_CNTL, 0);
+ }
+}
+
+/*
* GPU scratch registers helpers function.
*/
static void radeon_scratch_init(struct radeon_device *rdev)
@@ -102,7 +121,7 @@
if (rdev->mc.vram_location != 0xFFFFFFFFUL) {
/* vram location was already setup try to put gtt after
* if it fits */
- tmp = rdev->mc.vram_location + rdev->mc.vram_size;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
rdev->mc.gtt_location = tmp;
@@ -117,13 +136,13 @@
} else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) {
/* gtt location was already setup try to put vram before
* if it fits */
- if (rdev->mc.vram_size < rdev->mc.gtt_location) {
+ if (rdev->mc.mc_vram_size < rdev->mc.gtt_location) {
rdev->mc.vram_location = 0;
} else {
tmp = rdev->mc.gtt_location + rdev->mc.gtt_size;
- tmp += (rdev->mc.vram_size - 1);
- tmp &= ~(rdev->mc.vram_size - 1);
- if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) {
+ tmp += (rdev->mc.mc_vram_size - 1);
+ tmp &= ~(rdev->mc.mc_vram_size - 1);
+ if ((0xFFFFFFFFUL - tmp) >= rdev->mc.mc_vram_size) {
rdev->mc.vram_location = tmp;
} else {
printk(KERN_ERR "[drm] vram too big to fit "
@@ -133,12 +152,16 @@
}
} else {
rdev->mc.vram_location = 0;
- rdev->mc.gtt_location = rdev->mc.vram_size;
+ tmp = rdev->mc.mc_vram_size;
+ tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
+ rdev->mc.gtt_location = tmp;
}
- DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20);
+ DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20);
DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
rdev->mc.vram_location,
- rdev->mc.vram_location + rdev->mc.vram_size - 1);
+ rdev->mc.vram_location + rdev->mc.mc_vram_size - 1);
+ if (rdev->mc.real_vram_size != rdev->mc.mc_vram_size)
+ DRM_INFO("radeon: VRAM less than aperture workaround enabled\n");
DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20);
DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n",
rdev->mc.gtt_location,
@@ -433,6 +456,7 @@
uint32_t flags)
{
int r, ret;
+ int dma_bits;
DRM_INFO("radeon: Initializing kernel modesetting.\n");
rdev->shutdown = false;
@@ -475,8 +499,20 @@
return r;
}
- /* Report DMA addressing limitation */
- r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
+ /* set DMA mask + need_dma32 flags.
+ * PCIE - can handle 40-bits.
+ * IGP - can handle 40-bits (in theory)
+ * AGP - generally dma32 is safest
+ * PCI - only dma32
+ */
+ rdev->need_dma32 = false;
+ if (rdev->flags & RADEON_IS_AGP)
+ rdev->need_dma32 = true;
+ if (rdev->flags & RADEON_IS_PCI)
+ rdev->need_dma32 = true;
+
+ dma_bits = rdev->need_dma32 ? 32 : 40;
+ r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
if (r) {
printk(KERN_WARNING "radeon: No suitable DMA available.\n");
}
@@ -496,6 +532,8 @@
radeon_errata(rdev);
/* Initialize scratch registers */
radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
/* TODO: disable VGA need to use VGA request */
/* BIOS*/
@@ -527,27 +565,22 @@
radeon_combios_asic_init(rdev->ddev);
}
}
- /* Get vram informations */
- radeon_vram_info(rdev);
- /* Device is severly broken if aper size > vram size.
- * for RN50/M6/M7 - Novell bug 204882 ?
- */
- if (rdev->mc.vram_size < rdev->mc.aper_size) {
- rdev->mc.aper_size = rdev->mc.vram_size;
- }
- /* Add an MTRR for the VRAM */
- rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
- MTRR_TYPE_WRCOMB, 1);
- DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
- rdev->mc.vram_size >> 20,
- (unsigned)rdev->mc.aper_size >> 20);
- DRM_INFO("RAM width %dbits %cDR\n",
- rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
/* Initialize clocks */
r = radeon_clocks_init(rdev);
if (r) {
return r;
}
+ /* Get vram informations */
+ radeon_vram_info(rdev);
+
+ /* Add an MTRR for the VRAM */
+ rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
+ MTRR_TYPE_WRCOMB, 1);
+ DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
+ rdev->mc.real_vram_size >> 20,
+ (unsigned)rdev->mc.aper_size >> 20);
+ DRM_INFO("RAM width %dbits %cDR\n",
+ rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
/* Initialize memory controller (also test AGP) */
r = radeon_mc_init(rdev);
if (r) {
@@ -604,12 +637,12 @@
if (r) {
return r;
}
- if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
- rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
- }
if (!ret) {
DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
}
+ if (radeon_testing) {
+ radeon_test_moves(rdev);
+ }
if (radeon_benchmarking) {
radeon_benchmark(rdev);
}
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 3efcf1a..a8fa1bb 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -187,6 +187,7 @@
drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256);
radeon_crtc->crtc_id = index;
+ rdev->mode_info.crtcs[index] = radeon_crtc;
radeon_crtc->mode_set.crtc = &radeon_crtc->base;
radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1);
@@ -491,7 +492,11 @@
tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
current_freq = radeon_div(tmp, ref_div * post_div);
- error = abs(current_freq - freq);
+ if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+ error = freq - current_freq;
+ error = error < 0 ? 0xffffffff : error;
+ } else
+ error = abs(current_freq - freq);
vco_diff = abs(vco - best_vco);
if ((best_vco == 0 && error < best_error) ||
@@ -657,36 +662,51 @@
}
}
-void radeon_init_disp_bandwidth(struct drm_device *dev)
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct radeon_device *rdev = dev->dev_private;
- struct drm_display_mode *modes[2];
- int pixel_bytes[2];
- struct drm_crtc *crtc;
+ struct drm_device *dev = crtc->dev;
+ struct drm_encoder *encoder;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct radeon_encoder *radeon_encoder;
+ bool first = true;
- pixel_bytes[0] = pixel_bytes[1] = 0;
- modes[0] = modes[1] = NULL;
-
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-
- if (crtc->enabled && crtc->fb) {
- modes[radeon_crtc->crtc_id] = &crtc->mode;
- pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8;
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ if (encoder->crtc != crtc)
+ continue;
+ if (first) {
+ radeon_crtc->rmx_type = radeon_encoder->rmx_type;
+ radeon_crtc->devices = radeon_encoder->devices;
+ memcpy(&radeon_crtc->native_mode,
+ &radeon_encoder->native_mode,
+ sizeof(struct radeon_native_mode));
+ first = false;
+ } else {
+ if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
+ /* WARNING: Right now this can't happen but
+ * in the future we need to check that scaling
+ * are consistent accross different encoder
+ * (ie all encoder can work with the same
+ * scaling).
+ */
+ DRM_ERROR("Scaling not consistent accross encoder.\n");
+ return false;
+ }
}
}
-
- if (ASIC_IS_AVIVO(rdev)) {
- radeon_init_disp_bw_avivo(dev,
- modes[0],
- pixel_bytes[0],
- modes[1],
- pixel_bytes[1]);
+ if (radeon_crtc->rmx_type != RMX_OFF) {
+ fixed20_12 a, b;
+ a.full = rfixed_const(crtc->mode.vdisplay);
+ b.full = rfixed_const(radeon_crtc->native_mode.panel_xres);
+ radeon_crtc->vsc.full = rfixed_div(a, b);
+ a.full = rfixed_const(crtc->mode.hdisplay);
+ b.full = rfixed_const(radeon_crtc->native_mode.panel_yres);
+ radeon_crtc->hsc.full = rfixed_div(a, b);
} else {
- radeon_init_disp_bw_legacy(dev,
- modes[0],
- pixel_bytes[0],
- modes[1],
- pixel_bytes[1]);
+ radeon_crtc->vsc.full = rfixed_const(1);
+ radeon_crtc->hsc.full = rfixed_const(1);
}
+ return true;
}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 09c9fb9..0bd5879 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -89,6 +89,7 @@
int radeon_vram_limit = 0;
int radeon_gart_size = 512; /* default gart size */
int radeon_benchmarking = 0;
+int radeon_testing = 0;
int radeon_connector_table = 0;
#endif
@@ -117,6 +118,9 @@
MODULE_PARM_DESC(benchmark, "Run benchmark");
module_param_named(benchmark, radeon_benchmarking, int, 0444);
+MODULE_PARM_DESC(test, "Run tests");
+module_param_named(test, radeon_testing, int, 0444);
+
MODULE_PARM_DESC(connector_table, "Force connector table");
module_param_named(connector_table, radeon_connector_table, int, 0444);
#endif
@@ -314,6 +318,14 @@
driver = &driver_old;
driver->num_ioctls = radeon_max_ioctl;
#if defined(CONFIG_DRM_RADEON_KMS)
+#ifdef CONFIG_VGA_CONSOLE
+ if (vgacon_text_force() && radeon_modeset == -1) {
+ DRM_INFO("VGACON disable radeon kernel modesetting.\n");
+ driver = &driver_old;
+ driver->driver_features &= ~DRIVER_MODESET;
+ radeon_modeset = 0;
+ }
+#endif
/* if enabled by default */
if (radeon_modeset == -1) {
DRM_INFO("radeon default to kernel modesetting.\n");
@@ -325,17 +337,8 @@
driver->driver_features |= DRIVER_MODESET;
driver->num_ioctls = radeon_max_kms_ioctl;
}
-
/* if the vga console setting is enabled still
* let modprobe override it */
-#ifdef CONFIG_VGA_CONSOLE
- if (vgacon_text_force() && radeon_modeset == -1) {
- DRM_INFO("VGACON disable radeon kernel modesetting.\n");
- driver = &driver_old;
- driver->driver_features &= ~DRIVER_MODESET;
- radeon_modeset = 0;
- }
-#endif
#endif
return drm_init(driver);
}
@@ -345,7 +348,7 @@
drm_exit(driver);
}
-late_initcall(radeon_init);
+module_init(radeon_init);
module_exit(radeon_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 127d045..3933f821 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -143,6 +143,7 @@
CHIP_RV635,
CHIP_RV670,
CHIP_RS780,
+ CHIP_RS880,
CHIP_RV770,
CHIP_RV730,
CHIP_RV710,
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index c8ef0d1..0a92706 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -154,7 +154,6 @@
if (mode->hdisplay < native_mode->panel_xres ||
mode->vdisplay < native_mode->panel_yres) {
- radeon_encoder->flags |= RADEON_USE_RMX;
if (ASIC_IS_AVIVO(rdev)) {
adjusted_mode->hdisplay = native_mode->panel_xres;
adjusted_mode->vdisplay = native_mode->panel_yres;
@@ -197,15 +196,13 @@
}
}
+
static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
-
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- radeon_encoder->flags &= ~RADEON_USE_RMX;
-
drm_mode_set_crtcinfo(adjusted_mode, 0);
if (radeon_encoder->rmx_type != RMX_OFF)
@@ -808,234 +805,6 @@
}
-static void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
-{
-
- WREG32(0x659C, 0x0);
- WREG32(0x6594, 0x705);
- WREG32(0x65A4, 0x10001);
- WREG32(0x65D8, 0x0);
- WREG32(0x65B0, 0x0);
- WREG32(0x65C0, 0x0);
- WREG32(0x65D4, 0x0);
- WREG32(0x6578, 0x0);
- WREG32(0x657C, 0x841880A8);
- WREG32(0x6578, 0x1);
- WREG32(0x657C, 0x84208680);
- WREG32(0x6578, 0x2);
- WREG32(0x657C, 0xBFF880B0);
- WREG32(0x6578, 0x100);
- WREG32(0x657C, 0x83D88088);
- WREG32(0x6578, 0x101);
- WREG32(0x657C, 0x84608680);
- WREG32(0x6578, 0x102);
- WREG32(0x657C, 0xBFF080D0);
- WREG32(0x6578, 0x200);
- WREG32(0x657C, 0x83988068);
- WREG32(0x6578, 0x201);
- WREG32(0x657C, 0x84A08680);
- WREG32(0x6578, 0x202);
- WREG32(0x657C, 0xBFF080F8);
- WREG32(0x6578, 0x300);
- WREG32(0x657C, 0x83588058);
- WREG32(0x6578, 0x301);
- WREG32(0x657C, 0x84E08660);
- WREG32(0x6578, 0x302);
- WREG32(0x657C, 0xBFF88120);
- WREG32(0x6578, 0x400);
- WREG32(0x657C, 0x83188040);
- WREG32(0x6578, 0x401);
- WREG32(0x657C, 0x85008660);
- WREG32(0x6578, 0x402);
- WREG32(0x657C, 0xBFF88150);
- WREG32(0x6578, 0x500);
- WREG32(0x657C, 0x82D88030);
- WREG32(0x6578, 0x501);
- WREG32(0x657C, 0x85408640);
- WREG32(0x6578, 0x502);
- WREG32(0x657C, 0xBFF88180);
- WREG32(0x6578, 0x600);
- WREG32(0x657C, 0x82A08018);
- WREG32(0x6578, 0x601);
- WREG32(0x657C, 0x85808620);
- WREG32(0x6578, 0x602);
- WREG32(0x657C, 0xBFF081B8);
- WREG32(0x6578, 0x700);
- WREG32(0x657C, 0x82608010);
- WREG32(0x6578, 0x701);
- WREG32(0x657C, 0x85A08600);
- WREG32(0x6578, 0x702);
- WREG32(0x657C, 0x800081F0);
- WREG32(0x6578, 0x800);
- WREG32(0x657C, 0x8228BFF8);
- WREG32(0x6578, 0x801);
- WREG32(0x657C, 0x85E085E0);
- WREG32(0x6578, 0x802);
- WREG32(0x657C, 0xBFF88228);
- WREG32(0x6578, 0x10000);
- WREG32(0x657C, 0x82A8BF00);
- WREG32(0x6578, 0x10001);
- WREG32(0x657C, 0x82A08CC0);
- WREG32(0x6578, 0x10002);
- WREG32(0x657C, 0x8008BEF8);
- WREG32(0x6578, 0x10100);
- WREG32(0x657C, 0x81F0BF28);
- WREG32(0x6578, 0x10101);
- WREG32(0x657C, 0x83608CA0);
- WREG32(0x6578, 0x10102);
- WREG32(0x657C, 0x8018BED0);
- WREG32(0x6578, 0x10200);
- WREG32(0x657C, 0x8148BF38);
- WREG32(0x6578, 0x10201);
- WREG32(0x657C, 0x84408C80);
- WREG32(0x6578, 0x10202);
- WREG32(0x657C, 0x8008BEB8);
- WREG32(0x6578, 0x10300);
- WREG32(0x657C, 0x80B0BF78);
- WREG32(0x6578, 0x10301);
- WREG32(0x657C, 0x85008C20);
- WREG32(0x6578, 0x10302);
- WREG32(0x657C, 0x8020BEA0);
- WREG32(0x6578, 0x10400);
- WREG32(0x657C, 0x8028BF90);
- WREG32(0x6578, 0x10401);
- WREG32(0x657C, 0x85E08BC0);
- WREG32(0x6578, 0x10402);
- WREG32(0x657C, 0x8018BE90);
- WREG32(0x6578, 0x10500);
- WREG32(0x657C, 0xBFB8BFB0);
- WREG32(0x6578, 0x10501);
- WREG32(0x657C, 0x86C08B40);
- WREG32(0x6578, 0x10502);
- WREG32(0x657C, 0x8010BE90);
- WREG32(0x6578, 0x10600);
- WREG32(0x657C, 0xBF58BFC8);
- WREG32(0x6578, 0x10601);
- WREG32(0x657C, 0x87A08AA0);
- WREG32(0x6578, 0x10602);
- WREG32(0x657C, 0x8010BE98);
- WREG32(0x6578, 0x10700);
- WREG32(0x657C, 0xBF10BFF0);
- WREG32(0x6578, 0x10701);
- WREG32(0x657C, 0x886089E0);
- WREG32(0x6578, 0x10702);
- WREG32(0x657C, 0x8018BEB0);
- WREG32(0x6578, 0x10800);
- WREG32(0x657C, 0xBED8BFE8);
- WREG32(0x6578, 0x10801);
- WREG32(0x657C, 0x89408940);
- WREG32(0x6578, 0x10802);
- WREG32(0x657C, 0xBFE8BED8);
- WREG32(0x6578, 0x20000);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20001);
- WREG32(0x657C, 0x90008000);
- WREG32(0x6578, 0x20002);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20003);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20100);
- WREG32(0x657C, 0x80108000);
- WREG32(0x6578, 0x20101);
- WREG32(0x657C, 0x8FE0BF70);
- WREG32(0x6578, 0x20102);
- WREG32(0x657C, 0xBFE880C0);
- WREG32(0x6578, 0x20103);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20200);
- WREG32(0x657C, 0x8018BFF8);
- WREG32(0x6578, 0x20201);
- WREG32(0x657C, 0x8F80BF08);
- WREG32(0x6578, 0x20202);
- WREG32(0x657C, 0xBFD081A0);
- WREG32(0x6578, 0x20203);
- WREG32(0x657C, 0xBFF88000);
- WREG32(0x6578, 0x20300);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20301);
- WREG32(0x657C, 0x8EE0BEC0);
- WREG32(0x6578, 0x20302);
- WREG32(0x657C, 0xBFB082A0);
- WREG32(0x6578, 0x20303);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20400);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20401);
- WREG32(0x657C, 0x8E00BEA0);
- WREG32(0x6578, 0x20402);
- WREG32(0x657C, 0xBF8883C0);
- WREG32(0x6578, 0x20403);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x20500);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20501);
- WREG32(0x657C, 0x8D00BE90);
- WREG32(0x6578, 0x20502);
- WREG32(0x657C, 0xBF588500);
- WREG32(0x6578, 0x20503);
- WREG32(0x657C, 0x80008008);
- WREG32(0x6578, 0x20600);
- WREG32(0x657C, 0x80188000);
- WREG32(0x6578, 0x20601);
- WREG32(0x657C, 0x8BC0BE98);
- WREG32(0x6578, 0x20602);
- WREG32(0x657C, 0xBF308660);
- WREG32(0x6578, 0x20603);
- WREG32(0x657C, 0x80008008);
- WREG32(0x6578, 0x20700);
- WREG32(0x657C, 0x80108000);
- WREG32(0x6578, 0x20701);
- WREG32(0x657C, 0x8A80BEB0);
- WREG32(0x6578, 0x20702);
- WREG32(0x657C, 0xBF0087C0);
- WREG32(0x6578, 0x20703);
- WREG32(0x657C, 0x80008008);
- WREG32(0x6578, 0x20800);
- WREG32(0x657C, 0x80108000);
- WREG32(0x6578, 0x20801);
- WREG32(0x657C, 0x8920BED0);
- WREG32(0x6578, 0x20802);
- WREG32(0x657C, 0xBED08920);
- WREG32(0x6578, 0x20803);
- WREG32(0x657C, 0x80008010);
- WREG32(0x6578, 0x30000);
- WREG32(0x657C, 0x90008000);
- WREG32(0x6578, 0x30001);
- WREG32(0x657C, 0x80008000);
- WREG32(0x6578, 0x30100);
- WREG32(0x657C, 0x8FE0BF90);
- WREG32(0x6578, 0x30101);
- WREG32(0x657C, 0xBFF880A0);
- WREG32(0x6578, 0x30200);
- WREG32(0x657C, 0x8F60BF40);
- WREG32(0x6578, 0x30201);
- WREG32(0x657C, 0xBFE88180);
- WREG32(0x6578, 0x30300);
- WREG32(0x657C, 0x8EC0BF00);
- WREG32(0x6578, 0x30301);
- WREG32(0x657C, 0xBFC88280);
- WREG32(0x6578, 0x30400);
- WREG32(0x657C, 0x8DE0BEE0);
- WREG32(0x6578, 0x30401);
- WREG32(0x657C, 0xBFA083A0);
- WREG32(0x6578, 0x30500);
- WREG32(0x657C, 0x8CE0BED0);
- WREG32(0x6578, 0x30501);
- WREG32(0x657C, 0xBF7884E0);
- WREG32(0x6578, 0x30600);
- WREG32(0x657C, 0x8BA0BED8);
- WREG32(0x6578, 0x30601);
- WREG32(0x657C, 0xBF508640);
- WREG32(0x6578, 0x30700);
- WREG32(0x657C, 0x8A60BEE8);
- WREG32(0x6578, 0x30701);
- WREG32(0x657C, 0xBF2087A0);
- WREG32(0x6578, 0x30800);
- WREG32(0x657C, 0x8900BF00);
- WREG32(0x6578, 0x30801);
- WREG32(0x657C, 0xBF008900);
-}
-
static void
atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
{
@@ -1074,129 +843,6 @@
}
static void
-atombios_overscan_setup(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- SET_CRTC_OVERSCAN_PS_ALLOCATION args;
- int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
-
- memset(&args, 0, sizeof(args));
-
- args.usOverscanRight = 0;
- args.usOverscanLeft = 0;
- args.usOverscanBottom = 0;
- args.usOverscanTop = 0;
- args.ucCRTC = radeon_crtc->crtc_id;
-
- if (radeon_encoder->flags & RADEON_USE_RMX) {
- if (radeon_encoder->rmx_type == RMX_FULL) {
- args.usOverscanRight = 0;
- args.usOverscanLeft = 0;
- args.usOverscanBottom = 0;
- args.usOverscanTop = 0;
- } else if (radeon_encoder->rmx_type == RMX_CENTER) {
- args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
- args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
- args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
- args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
- } else if (radeon_encoder->rmx_type == RMX_ASPECT) {
- int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
- int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
-
- if (a1 > a2) {
- args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
- args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
- } else if (a2 > a1) {
- args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
- args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
- }
- }
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_scaler_setup(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- ENABLE_SCALER_PS_ALLOCATION args;
- int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
- /* fixme - fill in enc_priv for atom dac */
- enum radeon_tv_std tv_std = TV_STD_NTSC;
-
- if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
- return;
-
- memset(&args, 0, sizeof(args));
-
- args.ucScaler = radeon_crtc->crtc_id;
-
- if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
- switch (tv_std) {
- case TV_STD_NTSC:
- default:
- args.ucTVStandard = ATOM_TV_NTSC;
- break;
- case TV_STD_PAL:
- args.ucTVStandard = ATOM_TV_PAL;
- break;
- case TV_STD_PAL_M:
- args.ucTVStandard = ATOM_TV_PALM;
- break;
- case TV_STD_PAL_60:
- args.ucTVStandard = ATOM_TV_PAL60;
- break;
- case TV_STD_NTSC_J:
- args.ucTVStandard = ATOM_TV_NTSCJ;
- break;
- case TV_STD_SCART_PAL:
- args.ucTVStandard = ATOM_TV_PAL; /* ??? */
- break;
- case TV_STD_SECAM:
- args.ucTVStandard = ATOM_TV_SECAM;
- break;
- case TV_STD_PAL_CN:
- args.ucTVStandard = ATOM_TV_PALCN;
- break;
- }
- args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
- } else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) {
- args.ucTVStandard = ATOM_TV_CV;
- args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
- } else if (radeon_encoder->flags & RADEON_USE_RMX) {
- if (radeon_encoder->rmx_type == RMX_FULL)
- args.ucEnable = ATOM_SCALER_EXPANSION;
- else if (radeon_encoder->rmx_type == RMX_CENTER)
- args.ucEnable = ATOM_SCALER_CENTER;
- else if (radeon_encoder->rmx_type == RMX_ASPECT)
- args.ucEnable = ATOM_SCALER_EXPANSION;
- } else {
- if (ASIC_IS_AVIVO(rdev))
- args.ucEnable = ATOM_SCALER_DISABLE;
- else
- args.ucEnable = ATOM_SCALER_CENTER;
- }
-
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
- if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
- && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
- atom_rv515_force_tv_scaler(rdev);
- }
-
-}
-
-static void
radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
@@ -1448,8 +1094,6 @@
radeon_encoder->pixel_clock = adjusted_mode->clock;
radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
- atombios_overscan_setup(encoder, mode, adjusted_mode);
- atombios_scaler_setup(encoder);
atombios_set_encoder_crtc_source(encoder);
if (ASIC_IS_AVIVO(rdev)) {
@@ -1667,6 +1311,7 @@
radeon_encoder->encoder_id = encoder_id;
radeon_encoder->devices = supported_device;
+ radeon_encoder->rmx_type = RMX_OFF;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index fa86d39..3206c0a 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -101,9 +101,10 @@
break;
case 24:
case 32:
- fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
- (green & 0xff00) |
- ((blue & 0xff00) >> 8);
+ fb->pseudo_palette[regno] =
+ (((red >> 8) & 0xff) << info->var.red.offset) |
+ (((green >> 8) & 0xff) << info->var.green.offset) |
+ (((blue >> 8) & 0xff) << info->var.blue.offset);
break;
}
}
@@ -154,6 +155,7 @@
var->transp.length = 0;
var->transp.offset = 0;
break;
+#ifdef __LITTLE_ENDIAN
case 15:
var->red.offset = 10;
var->green.offset = 5;
@@ -194,6 +196,28 @@
var->transp.length = 8;
var->transp.offset = 24;
break;
+#else
+ case 24:
+ var->red.offset = 8;
+ var->green.offset = 16;
+ var->blue.offset = 24;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ break;
+ case 32:
+ var->red.offset = 8;
+ var->green.offset = 16;
+ var->blue.offset = 24;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 8;
+ var->transp.offset = 0;
+ break;
+#endif
default:
return -EINVAL;
}
@@ -447,10 +471,10 @@
.notifier_call = radeonfb_panic,
};
-static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp)
+static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bool tiled)
{
int aligned = width;
- int align_large = (ASIC_IS_AVIVO(rdev));
+ int align_large = (ASIC_IS_AVIVO(rdev)) || tiled;
int pitch_mask = 0;
switch (bpp / 8) {
@@ -478,36 +502,42 @@
{
struct fb_info *info;
struct radeon_fb_device *rfbdev;
- struct drm_framebuffer *fb;
+ struct drm_framebuffer *fb = NULL;
struct radeon_framebuffer *rfb;
struct drm_mode_fb_cmd mode_cmd;
struct drm_gem_object *gobj = NULL;
struct radeon_object *robj = NULL;
struct device *device = &rdev->pdev->dev;
int size, aligned_size, ret;
+ u64 fb_gpuaddr;
void *fbptr = NULL;
+ unsigned long tmp;
+ bool fb_tiled = false; /* useful for testing */
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
mode_cmd.bpp = 32;
/* need to align pitch with crtc limits */
- mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8);
+ mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
mode_cmd.depth = 24;
size = mode_cmd.pitch * mode_cmd.height;
aligned_size = ALIGN(size, PAGE_SIZE);
ret = radeon_gem_object_create(rdev, aligned_size, 0,
- RADEON_GEM_DOMAIN_VRAM,
- false, ttm_bo_type_kernel,
- false, &gobj);
+ RADEON_GEM_DOMAIN_VRAM,
+ false, ttm_bo_type_kernel,
+ false, &gobj);
if (ret) {
- printk(KERN_ERR "failed to allocate framebuffer\n");
+ printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n",
+ surface_width, surface_height);
ret = -ENOMEM;
goto out;
}
robj = gobj->driver_private;
+ if (fb_tiled)
+ radeon_object_set_tiling_flags(robj, RADEON_TILING_MACRO|RADEON_TILING_SURFACE, mode_cmd.pitch);
mutex_lock(&rdev->ddev->struct_mutex);
fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj);
if (fb == NULL) {
@@ -515,12 +545,19 @@
ret = -ENOMEM;
goto out_unref;
}
+ ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr);
+ if (ret) {
+ printk(KERN_ERR "failed to pin framebuffer\n");
+ ret = -ENOMEM;
+ goto out_unref;
+ }
list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
rfb = to_radeon_framebuffer(fb);
*rfb_p = rfb;
rdev->fbdev_rfb = rfb;
+ rdev->fbdev_robj = robj;
info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
if (info == NULL) {
@@ -529,6 +566,9 @@
}
rfbdev = info->par;
+ if (fb_tiled)
+ radeon_object_check_tiling(robj, 0, 0);
+
ret = radeon_object_kmap(robj, &fbptr);
if (ret) {
goto out_unref;
@@ -541,13 +581,13 @@
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
info->fix.ywrapstep = 0;
- info->fix.accel = FB_ACCEL_I830;
+ info->fix.accel = FB_ACCEL_NONE;
info->fix.type_aux = 0;
info->flags = FBINFO_DEFAULT;
info->fbops = &radeonfb_ops;
info->fix.line_length = fb->pitch;
- info->screen_base = fbptr;
- info->fix.smem_start = (unsigned long)fbptr;
+ tmp = fb_gpuaddr - rdev->mc.vram_location;
+ info->fix.smem_start = rdev->mc.aper_base + tmp;
info->fix.smem_len = size;
info->screen_base = fbptr;
info->screen_size = size;
@@ -562,8 +602,13 @@
info->var.width = -1;
info->var.xres = fb_width;
info->var.yres = fb_height;
- info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
- info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+
+ /* setup aperture base/size for vesafb takeover */
+ info->aperture_base = rdev->ddev->mode_config.fb_base;
+ info->aperture_size = rdev->mc.real_vram_size;
+
+ info->fix.mmio_start = 0;
+ info->fix.mmio_len = 0;
info->pixmap.size = 64*1024;
info->pixmap.buf_align = 8;
info->pixmap.access_align = 32;
@@ -590,6 +635,7 @@
info->var.transp.offset = 0;
info->var.transp.length = 0;
break;
+#ifdef __LITTLE_ENDIAN
case 15:
info->var.red.offset = 10;
info->var.green.offset = 5;
@@ -629,7 +675,29 @@
info->var.transp.offset = 24;
info->var.transp.length = 8;
break;
+#else
+ case 24:
+ info->var.red.offset = 8;
+ info->var.green.offset = 16;
+ info->var.blue.offset = 24;
+ info->var.red.length = 8;
+ info->var.green.length = 8;
+ info->var.blue.length = 8;
+ info->var.transp.offset = 0;
+ info->var.transp.length = 0;
+ break;
+ case 32:
+ info->var.red.offset = 8;
+ info->var.green.offset = 16;
+ info->var.blue.offset = 24;
+ info->var.red.length = 8;
+ info->var.green.length = 8;
+ info->var.blue.length = 8;
+ info->var.transp.offset = 0;
+ info->var.transp.length = 8;
+ break;
default:
+#endif
break;
}
@@ -644,7 +712,7 @@
if (robj) {
radeon_object_kunmap(robj);
}
- if (ret) {
+ if (fb && ret) {
list_del(&fb->filp_head);
drm_gem_object_unreference(gobj);
drm_framebuffer_cleanup(fb);
@@ -813,6 +881,7 @@
robj = rfb->obj->driver_private;
unregister_framebuffer(info);
radeon_object_kunmap(robj);
+ radeon_object_unpin(robj);
framebuffer_release(info);
}
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 96afbf5..b4e48dd 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -195,7 +195,7 @@
r = wait_event_interruptible_timeout(rdev->fence_drv.queue,
radeon_fence_signaled(fence), timeout);
if (unlikely(r == -ERESTARTSYS)) {
- return -ERESTART;
+ return -EBUSY;
}
} else {
r = wait_event_timeout(rdev->fence_drv.queue,
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index d343a15..2977539 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -177,7 +177,7 @@
return -ENOMEM;
}
rdev->gart.pages[p] = pagelist[i];
- page_base = (uint32_t)rdev->gart.pages_addr[p];
+ page_base = rdev->gart.pages_addr[p];
for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
radeon_gart_set_page(rdev, t, page_base);
page_base += 4096;
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index eb51603..cded518 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -157,9 +157,9 @@
struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_info *args = data;
- args->vram_size = rdev->mc.vram_size;
+ args->vram_size = rdev->mc.real_vram_size;
/* FIXME: report somethings that makes sense */
- args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024);
+ args->vram_visible = rdev->mc.real_vram_size - (4 * 1024 * 1024);
args->gart_size = rdev->mc.gtt_size;
return 0;
}
@@ -285,3 +285,44 @@
mutex_unlock(&dev->struct_mutex);
return r;
}
+
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp)
+{
+ struct drm_radeon_gem_set_tiling *args = data;
+ struct drm_gem_object *gobj;
+ struct radeon_object *robj;
+ int r = 0;
+
+ DRM_DEBUG("%d \n", args->handle);
+ gobj = drm_gem_object_lookup(dev, filp, args->handle);
+ if (gobj == NULL)
+ return -EINVAL;
+ robj = gobj->driver_private;
+ radeon_object_set_tiling_flags(robj, args->tiling_flags, args->pitch);
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(gobj);
+ mutex_unlock(&dev->struct_mutex);
+ return r;
+}
+
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *filp)
+{
+ struct drm_radeon_gem_get_tiling *args = data;
+ struct drm_gem_object *gobj;
+ struct radeon_object *robj;
+ int r = 0;
+
+ DRM_DEBUG("\n");
+ gobj = drm_gem_object_lookup(dev, filp, args->handle);
+ if (gobj == NULL)
+ return -EINVAL;
+ robj = gobj->driver_private;
+ radeon_object_get_tiling_flags(robj, &args->tiling_flags,
+ &args->pitch);
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(gobj);
+ mutex_unlock(&dev->struct_mutex);
+ return r;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 4612a7c..3357110 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -58,6 +58,8 @@
if (r) {
DRM_ERROR("Failed to initialize radeon, disabling IOCTL\n");
radeon_device_fini(rdev);
+ kfree(rdev);
+ dev->dev_private = NULL;
return r;
}
return 0;
@@ -291,5 +293,7 @@
DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH),
};
int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 8086ecf..7d06dc9 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -29,6 +29,171 @@
#include "radeon_fixed.h"
#include "radeon.h"
+static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ int xres = mode->hdisplay;
+ int yres = mode->vdisplay;
+ bool hscale = true, vscale = true;
+ int hsync_wid;
+ int vsync_wid;
+ int hsync_start;
+ int blank_width;
+ u32 scale, inc, crtc_more_cntl;
+ u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active;
+ u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp;
+ u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp;
+ struct radeon_native_mode *native_mode = &radeon_crtc->native_mode;
+
+ fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
+ (RADEON_VERT_STRETCH_RESERVED |
+ RADEON_VERT_AUTO_RATIO_INC);
+ fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
+ (RADEON_HORZ_FP_LOOP_STRETCH |
+ RADEON_HORZ_AUTO_RATIO_INC);
+
+ crtc_more_cntl = 0;
+ if ((rdev->family == CHIP_RS100) ||
+ (rdev->family == CHIP_RS200)) {
+ /* This is to workaround the asic bug for RMX, some versions
+ of BIOS dosen't have this register initialized correctly. */
+ crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
+ }
+
+
+ fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+ | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+ hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+ if (!hsync_wid)
+ hsync_wid = 1;
+ hsync_start = mode->crtc_hsync_start - 8;
+
+ fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
+ | ((hsync_wid & 0x3f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+ ? RADEON_CRTC_H_SYNC_POL
+ : 0));
+
+ fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+ | ((mode->crtc_vdisplay - 1) << 16));
+
+ vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ if (!vsync_wid)
+ vsync_wid = 1;
+
+ fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+ | ((vsync_wid & 0x1f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+ ? RADEON_CRTC_V_SYNC_POL
+ : 0));
+
+ fp_horz_vert_active = 0;
+
+ if (native_mode->panel_xres == 0 ||
+ native_mode->panel_yres == 0) {
+ hscale = false;
+ vscale = false;
+ } else {
+ if (xres > native_mode->panel_xres)
+ xres = native_mode->panel_xres;
+ if (yres > native_mode->panel_yres)
+ yres = native_mode->panel_yres;
+
+ if (xres == native_mode->panel_xres)
+ hscale = false;
+ if (yres == native_mode->panel_yres)
+ vscale = false;
+ }
+
+ switch (radeon_crtc->rmx_type) {
+ case RMX_FULL:
+ case RMX_ASPECT:
+ if (!hscale)
+ fp_horz_stretch |= ((xres/8-1) << 16);
+ else {
+ inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
+ scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
+ / native_mode->panel_xres + 1;
+ fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
+ RADEON_HORZ_STRETCH_BLEND |
+ RADEON_HORZ_STRETCH_ENABLE |
+ ((native_mode->panel_xres/8-1) << 16));
+ }
+
+ if (!vscale)
+ fp_vert_stretch |= ((yres-1) << 12);
+ else {
+ inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
+ scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
+ / native_mode->panel_yres + 1;
+ fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
+ RADEON_VERT_STRETCH_ENABLE |
+ RADEON_VERT_STRETCH_BLEND |
+ ((native_mode->panel_yres-1) << 12));
+ }
+ break;
+ case RMX_CENTER:
+ fp_horz_stretch |= ((xres/8-1) << 16);
+ fp_vert_stretch |= ((yres-1) << 12);
+
+ crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
+ RADEON_CRTC_AUTO_VERT_CENTER_EN);
+
+ blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
+ if (blank_width > 110)
+ blank_width = 110;
+
+ fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
+ | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+ hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+ if (!hsync_wid)
+ hsync_wid = 1;
+
+ fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
+ | ((hsync_wid & 0x3f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+ ? RADEON_CRTC_H_SYNC_POL
+ : 0));
+
+ fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
+ | ((mode->crtc_vdisplay - 1) << 16));
+
+ vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ if (!vsync_wid)
+ vsync_wid = 1;
+
+ fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
+ | ((vsync_wid & 0x1f) << 16)
+ | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+ ? RADEON_CRTC_V_SYNC_POL
+ : 0)));
+
+ fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
+ (((native_mode->panel_xres / 8) & 0x1ff) << 16));
+ break;
+ case RMX_OFF:
+ default:
+ fp_horz_stretch |= ((xres/8-1) << 16);
+ fp_vert_stretch |= ((yres-1) << 12);
+ break;
+ }
+
+ WREG32(RADEON_FP_HORZ_STRETCH, fp_horz_stretch);
+ WREG32(RADEON_FP_VERT_STRETCH, fp_vert_stretch);
+ WREG32(RADEON_CRTC_MORE_CNTL, crtc_more_cntl);
+ WREG32(RADEON_FP_HORZ_VERT_ACTIVE, fp_horz_vert_active);
+ WREG32(RADEON_FP_H_SYNC_STRT_WID, fp_h_sync_strt_wid);
+ WREG32(RADEON_FP_V_SYNC_STRT_WID, fp_v_sync_strt_wid);
+ WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
+ WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
+}
+
void radeon_restore_common_regs(struct drm_device *dev)
{
/* don't need this yet */
@@ -235,6 +400,7 @@
uint64_t base;
uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0;
uint32_t crtc_pitch, pitch_pixels;
+ uint32_t tiling_flags;
DRM_DEBUG("\n");
@@ -244,7 +410,12 @@
if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) {
return -EINVAL;
}
- crtc_offset = (u32)base;
+ /* if scanout was in GTT this really wouldn't work */
+ /* crtc offset is from display base addr not FB location */
+ radeon_crtc->legacy_display_base_addr = rdev->mc.vram_location;
+
+ base -= radeon_crtc->legacy_display_base_addr;
+
crtc_offset_cntl = 0;
pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
@@ -253,8 +424,12 @@
(crtc->fb->bits_per_pixel * 8));
crtc_pitch |= crtc_pitch << 16;
- /* TODO tiling */
- if (0) {
+ radeon_object_get_tiling_flags(obj->driver_private,
+ &tiling_flags, NULL);
+ if (tiling_flags & RADEON_TILING_MICRO)
+ DRM_ERROR("trying to scanout microtiled buffer\n");
+
+ if (tiling_flags & RADEON_TILING_MACRO) {
if (ASIC_IS_R300(rdev))
crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN |
R300_CRTC_MICRO_TILE_BUFFER_DIS |
@@ -270,15 +445,13 @@
crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN;
}
-
- /* TODO more tiling */
- if (0) {
+ if (tiling_flags & RADEON_TILING_MACRO) {
if (ASIC_IS_R300(rdev)) {
crtc_tile_x0_y0 = x | (y << 16);
base &= ~0x7ff;
} else {
int byteshift = crtc->fb->bits_per_pixel >> 4;
- int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11;
+ int tile_addr = (((y >> 3) * pitch_pixels + x) >> (8 - byteshift)) << 11;
base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8);
crtc_offset_cntl |= (y % 16);
}
@@ -303,11 +476,9 @@
base &= ~7;
- /* update sarea TODO */
-
crtc_offset = (u32)base;
- WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location);
+ WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, radeon_crtc->legacy_display_base_addr);
if (ASIC_IS_R300(rdev)) {
if (radeon_crtc->crtc_id)
@@ -751,6 +922,8 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+ return false;
return true;
}
@@ -759,16 +932,25 @@
struct drm_display_mode *adjusted_mode,
int x, int y, struct drm_framebuffer *old_fb)
{
-
- DRM_DEBUG("\n");
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
/* TODO TV */
-
radeon_crtc_set_base(crtc, x, y, old_fb);
radeon_set_crtc_timing(crtc, adjusted_mode);
radeon_set_pll(crtc, adjusted_mode);
- radeon_init_disp_bandwidth(crtc->dev);
-
+ radeon_bandwidth_update(rdev);
+ if (radeon_crtc->crtc_id == 0) {
+ radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode);
+ } else {
+ if (radeon_crtc->rmx_type != RMX_OFF) {
+ /* FIXME: only first crtc has rmx what should we
+ * do ?
+ */
+ DRM_ERROR("Mode need scaling but only first crtc can do that.\n");
+ }
+ }
return 0;
}
@@ -799,478 +981,3 @@
radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP;
drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs);
}
-
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2)
-{
- struct radeon_device *rdev = dev->dev_private;
- fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
- fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
- fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
- uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
- fixed20_12 memtcas_ff[8] = {
- fixed_init(1),
- fixed_init(2),
- fixed_init(3),
- fixed_init(0),
- fixed_init_half(1),
- fixed_init_half(2),
- fixed_init(0),
- };
- fixed20_12 memtcas_rs480_ff[8] = {
- fixed_init(0),
- fixed_init(1),
- fixed_init(2),
- fixed_init(3),
- fixed_init(0),
- fixed_init_half(1),
- fixed_init_half(2),
- fixed_init_half(3),
- };
- fixed20_12 memtcas2_ff[8] = {
- fixed_init(0),
- fixed_init(1),
- fixed_init(2),
- fixed_init(3),
- fixed_init(4),
- fixed_init(5),
- fixed_init(6),
- fixed_init(7),
- };
- fixed20_12 memtrbs[8] = {
- fixed_init(1),
- fixed_init_half(1),
- fixed_init(2),
- fixed_init_half(2),
- fixed_init(3),
- fixed_init_half(3),
- fixed_init(4),
- fixed_init_half(4)
- };
- fixed20_12 memtrbs_r4xx[8] = {
- fixed_init(4),
- fixed_init(5),
- fixed_init(6),
- fixed_init(7),
- fixed_init(8),
- fixed_init(9),
- fixed_init(10),
- fixed_init(11)
- };
- fixed20_12 min_mem_eff;
- fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
- fixed20_12 cur_latency_mclk, cur_latency_sclk;
- fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
- disp_drain_rate2, read_return_rate;
- fixed20_12 time_disp1_drop_priority;
- int c;
- int cur_size = 16; /* in octawords */
- int critical_point = 0, critical_point2;
-/* uint32_t read_return_rate, time_disp1_drop_priority; */
- int stop_req, max_stop_req;
-
- min_mem_eff.full = rfixed_const_8(0);
- /* get modes */
- if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
- uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
- mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
- mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
- /* check crtc enables */
- if (mode2)
- mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
- if (mode1)
- mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
- WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
- }
-
- /*
- * determine is there is enough bw for current mode
- */
- mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
- temp_ff.full = rfixed_const(100);
- mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
- sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
- sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
- temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
- temp_ff.full = rfixed_const(temp);
- mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-
- pix_clk.full = 0;
- pix_clk2.full = 0;
- peak_disp_bw.full = 0;
- if (mode1) {
- temp_ff.full = rfixed_const(1000);
- pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
- pix_clk.full = rfixed_div(pix_clk, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes1);
- peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
- }
- if (mode2) {
- temp_ff.full = rfixed_const(1000);
- pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
- pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
- temp_ff.full = rfixed_const(pixel_bytes2);
- peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
- }
-
- mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
- if (peak_disp_bw.full >= mem_bw.full) {
- DRM_ERROR("You may not have enough display bandwidth for current mode\n"
- "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
- }
-
- /* Get values from the EXT_MEM_CNTL register...converting its contents. */
- temp = RREG32(RADEON_MEM_TIMING_CNTL);
- if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
- mem_trcd = ((temp >> 2) & 0x3) + 1;
- mem_trp = ((temp & 0x3)) + 1;
- mem_tras = ((temp & 0x70) >> 4) + 1;
- } else if (rdev->family == CHIP_R300 ||
- rdev->family == CHIP_R350) { /* r300, r350 */
- mem_trcd = (temp & 0x7) + 1;
- mem_trp = ((temp >> 8) & 0x7) + 1;
- mem_tras = ((temp >> 11) & 0xf) + 4;
- } else if (rdev->family == CHIP_RV350 ||
- rdev->family <= CHIP_RV380) {
- /* rv3x0 */
- mem_trcd = (temp & 0x7) + 3;
- mem_trp = ((temp >> 8) & 0x7) + 3;
- mem_tras = ((temp >> 11) & 0xf) + 6;
- } else if (rdev->family == CHIP_R420 ||
- rdev->family == CHIP_R423 ||
- rdev->family == CHIP_RV410) {
- /* r4xx */
- mem_trcd = (temp & 0xf) + 3;
- if (mem_trcd > 15)
- mem_trcd = 15;
- mem_trp = ((temp >> 8) & 0xf) + 3;
- if (mem_trp > 15)
- mem_trp = 15;
- mem_tras = ((temp >> 12) & 0x1f) + 6;
- if (mem_tras > 31)
- mem_tras = 31;
- } else { /* RV200, R200 */
- mem_trcd = (temp & 0x7) + 1;
- mem_trp = ((temp >> 8) & 0x7) + 1;
- mem_tras = ((temp >> 12) & 0xf) + 4;
- }
- /* convert to FF */
- trcd_ff.full = rfixed_const(mem_trcd);
- trp_ff.full = rfixed_const(mem_trp);
- tras_ff.full = rfixed_const(mem_tras);
-
- /* Get values from the MEM_SDRAM_MODE_REG register...converting its */
- temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
- data = (temp & (7 << 20)) >> 20;
- if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
- if (rdev->family == CHIP_RS480) /* don't think rs400 */
- tcas_ff = memtcas_rs480_ff[data];
- else
- tcas_ff = memtcas_ff[data];
- } else
- tcas_ff = memtcas2_ff[data];
-
- if (rdev->family == CHIP_RS400 ||
- rdev->family == CHIP_RS480) {
- /* extra cas latency stored in bits 23-25 0-4 clocks */
- data = (temp >> 23) & 0x7;
- if (data < 5)
- tcas_ff.full += rfixed_const(data);
- }
-
- if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
- /* on the R300, Tcas is included in Trbs.
- */
- temp = RREG32(RADEON_MEM_CNTL);
- data = (R300_MEM_NUM_CHANNELS_MASK & temp);
- if (data == 1) {
- if (R300_MEM_USE_CD_CH_ONLY & temp) {
- temp = RREG32(R300_MC_IND_INDEX);
- temp &= ~R300_MC_IND_ADDR_MASK;
- temp |= R300_MC_READ_CNTL_CD_mcind;
- WREG32(R300_MC_IND_INDEX, temp);
- temp = RREG32(R300_MC_IND_DATA);
- data = (R300_MEM_RBS_POSITION_C_MASK & temp);
- } else {
- temp = RREG32(R300_MC_READ_CNTL_AB);
- data = (R300_MEM_RBS_POSITION_A_MASK & temp);
- }
- } else {
- temp = RREG32(R300_MC_READ_CNTL_AB);
- data = (R300_MEM_RBS_POSITION_A_MASK & temp);
- }
- if (rdev->family == CHIP_RV410 ||
- rdev->family == CHIP_R420 ||
- rdev->family == CHIP_R423)
- trbs_ff = memtrbs_r4xx[data];
- else
- trbs_ff = memtrbs[data];
- tcas_ff.full += trbs_ff.full;
- }
-
- sclk_eff_ff.full = sclk_ff.full;
-
- if (rdev->flags & RADEON_IS_AGP) {
- fixed20_12 agpmode_ff;
- agpmode_ff.full = rfixed_const(radeon_agpmode);
- temp_ff.full = rfixed_const_666(16);
- sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
- }
- /* TODO PCIE lanes may affect this - agpmode == 16?? */
-
- if (ASIC_IS_R300(rdev)) {
- sclk_delay_ff.full = rfixed_const(250);
- } else {
- if ((rdev->family == CHIP_RV100) ||
- rdev->flags & RADEON_IS_IGP) {
- if (rdev->mc.vram_is_ddr)
- sclk_delay_ff.full = rfixed_const(41);
- else
- sclk_delay_ff.full = rfixed_const(33);
- } else {
- if (rdev->mc.vram_width == 128)
- sclk_delay_ff.full = rfixed_const(57);
- else
- sclk_delay_ff.full = rfixed_const(41);
- }
- }
-
- mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
-
- if (rdev->mc.vram_is_ddr) {
- if (rdev->mc.vram_width == 32) {
- k1.full = rfixed_const(40);
- c = 3;
- } else {
- k1.full = rfixed_const(20);
- c = 1;
- }
- } else {
- k1.full = rfixed_const(40);
- c = 3;
- }
-
- temp_ff.full = rfixed_const(2);
- mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
- temp_ff.full = rfixed_const(c);
- mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
- temp_ff.full = rfixed_const(4);
- mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
- mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
- mc_latency_mclk.full += k1.full;
-
- mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
- mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
-
- /*
- HW cursor time assuming worst case of full size colour cursor.
- */
- temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
- temp_ff.full += trcd_ff.full;
- if (temp_ff.full < tras_ff.full)
- temp_ff.full = tras_ff.full;
- cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
-
- temp_ff.full = rfixed_const(cur_size);
- cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
- /*
- Find the total latency for the display data.
- */
- disp_latency_overhead.full = rfixed_const(80);
- disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
- mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
- mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
-
- if (mc_latency_mclk.full > mc_latency_sclk.full)
- disp_latency.full = mc_latency_mclk.full;
- else
- disp_latency.full = mc_latency_sclk.full;
-
- /* setup Max GRPH_STOP_REQ default value */
- if (ASIC_IS_RV100(rdev))
- max_stop_req = 0x5c;
- else
- max_stop_req = 0x7c;
-
- if (mode1) {
- /* CRTC1
- Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
- GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
- */
- stop_req = mode1->hdisplay * pixel_bytes1 / 16;
-
- if (stop_req > max_stop_req)
- stop_req = max_stop_req;
-
- /*
- Find the drain rate of the display buffer.
- */
- temp_ff.full = rfixed_const((16/pixel_bytes1));
- disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
-
- /*
- Find the critical point of the display buffer.
- */
- crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
- crit_point_ff.full += rfixed_const_half(0);
-
- critical_point = rfixed_trunc(crit_point_ff);
-
- if (rdev->disp_priority == 2) {
- critical_point = 0;
- }
-
- /*
- The critical point should never be above max_stop_req-4. Setting
- GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
- */
- if (max_stop_req - critical_point < 4)
- critical_point = 0;
-
- if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
- /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
- critical_point = 0x10;
- }
-
- temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
- temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
- temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
- temp &= ~(RADEON_GRPH_START_REQ_MASK);
- if ((rdev->family == CHIP_R350) &&
- (stop_req > 0x15)) {
- stop_req -= 0x10;
- }
- temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
- temp |= RADEON_GRPH_BUFFER_SIZE;
- temp &= ~(RADEON_GRPH_CRITICAL_CNTL |
- RADEON_GRPH_CRITICAL_AT_SOF |
- RADEON_GRPH_STOP_CNTL);
- /*
- Write the result into the register.
- */
- WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
- (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-#if 0
- if ((rdev->family == CHIP_RS400) ||
- (rdev->family == CHIP_RS480)) {
- /* attempt to program RS400 disp regs correctly ??? */
- temp = RREG32(RS400_DISP1_REG_CNTL);
- temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
- RS400_DISP1_STOP_REQ_LEVEL_MASK);
- WREG32(RS400_DISP1_REQ_CNTL1, (temp |
- (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
- (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
- temp = RREG32(RS400_DMIF_MEM_CNTL1);
- temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
- RS400_DISP1_CRITICAL_POINT_STOP_MASK);
- WREG32(RS400_DMIF_MEM_CNTL1, (temp |
- (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
- (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
- }
-#endif
-
- DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
- /* (unsigned int)info->SavedReg->grph_buffer_cntl, */
- (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
- }
-
- if (mode2) {
- u32 grph2_cntl;
- stop_req = mode2->hdisplay * pixel_bytes2 / 16;
-
- if (stop_req > max_stop_req)
- stop_req = max_stop_req;
-
- /*
- Find the drain rate of the display buffer.
- */
- temp_ff.full = rfixed_const((16/pixel_bytes2));
- disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
-
- grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
- grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
- grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
- grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
- if ((rdev->family == CHIP_R350) &&
- (stop_req > 0x15)) {
- stop_req -= 0x10;
- }
- grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
- grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
- grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL |
- RADEON_GRPH_CRITICAL_AT_SOF |
- RADEON_GRPH_STOP_CNTL);
-
- if ((rdev->family == CHIP_RS100) ||
- (rdev->family == CHIP_RS200))
- critical_point2 = 0;
- else {
- temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
- temp_ff.full = rfixed_const(temp);
- temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
- if (sclk_ff.full < temp_ff.full)
- temp_ff.full = sclk_ff.full;
-
- read_return_rate.full = temp_ff.full;
-
- if (mode1) {
- temp_ff.full = read_return_rate.full - disp_drain_rate.full;
- time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
- } else {
- time_disp1_drop_priority.full = 0;
- }
- crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
- crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
- crit_point_ff.full += rfixed_const_half(0);
-
- critical_point2 = rfixed_trunc(crit_point_ff);
-
- if (rdev->disp_priority == 2) {
- critical_point2 = 0;
- }
-
- if (max_stop_req - critical_point2 < 4)
- critical_point2 = 0;
-
- }
-
- if (critical_point2 == 0 && rdev->family == CHIP_R300) {
- /* some R300 cards have problem with this set to 0 */
- critical_point2 = 0x10;
- }
-
- WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
- (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
- if ((rdev->family == CHIP_RS400) ||
- (rdev->family == CHIP_RS480)) {
-#if 0
- /* attempt to program RS400 disp2 regs correctly ??? */
- temp = RREG32(RS400_DISP2_REQ_CNTL1);
- temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
- RS400_DISP2_STOP_REQ_LEVEL_MASK);
- WREG32(RS400_DISP2_REQ_CNTL1, (temp |
- (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
- (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
- temp = RREG32(RS400_DISP2_REQ_CNTL2);
- temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
- RS400_DISP2_CRITICAL_POINT_STOP_MASK);
- WREG32(RS400_DISP2_REQ_CNTL2, (temp |
- (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
- (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
-#endif
- WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
- WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
- WREG32(RS400_DMIF_MEM_CNTL1, 0x29CA71DC);
- WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
- }
-
- DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
- (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
- }
-}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 2c2f42d..34d0f58 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -30,170 +30,6 @@
#include "atom.h"
-static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- int xres = mode->hdisplay;
- int yres = mode->vdisplay;
- bool hscale = true, vscale = true;
- int hsync_wid;
- int vsync_wid;
- int hsync_start;
- uint32_t scale, inc;
- uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active;
- uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp;
- struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
- DRM_DEBUG("\n");
-
- fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
- (RADEON_VERT_STRETCH_RESERVED |
- RADEON_VERT_AUTO_RATIO_INC);
- fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
- (RADEON_HORZ_FP_LOOP_STRETCH |
- RADEON_HORZ_AUTO_RATIO_INC);
-
- crtc_more_cntl = 0;
- if ((rdev->family == CHIP_RS100) ||
- (rdev->family == CHIP_RS200)) {
- /* This is to workaround the asic bug for RMX, some versions
- of BIOS dosen't have this register initialized correctly. */
- crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
- }
-
-
- fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
- | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
- hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
- if (!hsync_wid)
- hsync_wid = 1;
- hsync_start = mode->crtc_hsync_start - 8;
-
- fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
- | ((hsync_wid & 0x3f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
- ? RADEON_CRTC_H_SYNC_POL
- : 0));
-
- fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
- | ((mode->crtc_vdisplay - 1) << 16));
-
- vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
- if (!vsync_wid)
- vsync_wid = 1;
-
- fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
- | ((vsync_wid & 0x1f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
- ? RADEON_CRTC_V_SYNC_POL
- : 0));
-
- fp_horz_vert_active = 0;
-
- if (native_mode->panel_xres == 0 ||
- native_mode->panel_yres == 0) {
- hscale = false;
- vscale = false;
- } else {
- if (xres > native_mode->panel_xres)
- xres = native_mode->panel_xres;
- if (yres > native_mode->panel_yres)
- yres = native_mode->panel_yres;
-
- if (xres == native_mode->panel_xres)
- hscale = false;
- if (yres == native_mode->panel_yres)
- vscale = false;
- }
-
- if (radeon_encoder->flags & RADEON_USE_RMX) {
- if (radeon_encoder->rmx_type != RMX_CENTER) {
- if (!hscale)
- fp_horz_stretch |= ((xres/8-1) << 16);
- else {
- inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
- scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
- / native_mode->panel_xres + 1;
- fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
- RADEON_HORZ_STRETCH_BLEND |
- RADEON_HORZ_STRETCH_ENABLE |
- ((native_mode->panel_xres/8-1) << 16));
- }
-
- if (!vscale)
- fp_vert_stretch |= ((yres-1) << 12);
- else {
- inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
- scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
- / native_mode->panel_yres + 1;
- fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
- RADEON_VERT_STRETCH_ENABLE |
- RADEON_VERT_STRETCH_BLEND |
- ((native_mode->panel_yres-1) << 12));
- }
- } else if (radeon_encoder->rmx_type == RMX_CENTER) {
- int blank_width;
-
- fp_horz_stretch |= ((xres/8-1) << 16);
- fp_vert_stretch |= ((yres-1) << 12);
-
- crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
- RADEON_CRTC_AUTO_VERT_CENTER_EN);
-
- blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
- if (blank_width > 110)
- blank_width = 110;
-
- fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
- | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
- hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
- if (!hsync_wid)
- hsync_wid = 1;
-
- fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
- | ((hsync_wid & 0x3f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
- ? RADEON_CRTC_H_SYNC_POL
- : 0));
-
- fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
- | ((mode->crtc_vdisplay - 1) << 16));
-
- vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
- if (!vsync_wid)
- vsync_wid = 1;
-
- fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
- | ((vsync_wid & 0x1f) << 16)
- | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
- ? RADEON_CRTC_V_SYNC_POL
- : 0)));
-
- fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
- (((native_mode->panel_xres / 8) & 0x1ff) << 16));
- }
- } else {
- fp_horz_stretch |= ((xres/8-1) << 16);
- fp_vert_stretch |= ((yres-1) << 12);
- }
-
- WREG32(RADEON_FP_HORZ_STRETCH, fp_horz_stretch);
- WREG32(RADEON_FP_VERT_STRETCH, fp_vert_stretch);
- WREG32(RADEON_CRTC_MORE_CNTL, crtc_more_cntl);
- WREG32(RADEON_FP_HORZ_VERT_ACTIVE, fp_horz_vert_active);
- WREG32(RADEON_FP_H_SYNC_STRT_WID, fp_h_sync_strt_wid);
- WREG32(RADEON_FP_V_SYNC_STRT_WID, fp_v_sync_strt_wid);
- WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
- WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
-
-}
-
static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
@@ -287,9 +123,6 @@
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
@@ -318,7 +151,7 @@
if (radeon_crtc->crtc_id == 0) {
if (ASIC_IS_R300(rdev)) {
- if (radeon_encoder->flags & RADEON_USE_RMX)
+ if (radeon_encoder->rmx_type != RMX_OFF)
lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX;
} else
lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2;
@@ -350,8 +183,6 @@
drm_mode_set_crtcinfo(adjusted_mode, 0);
- radeon_encoder->flags &= ~RADEON_USE_RMX;
-
if (radeon_encoder->rmx_type != RMX_OFF)
radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
@@ -455,9 +286,6 @@
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
if (radeon_crtc->crtc_id == 0) {
if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
@@ -653,9 +481,6 @@
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
tmp &= 0xfffff;
if (rdev->family == CHIP_RV280) {
@@ -711,7 +536,7 @@
if (radeon_crtc->crtc_id == 0) {
if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
- if (radeon_encoder->flags & RADEON_USE_RMX)
+ if (radeon_encoder->rmx_type != RMX_OFF)
fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX;
else
fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
@@ -820,9 +645,6 @@
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
if (rdev->is_atom_bios) {
radeon_encoder->pixel_clock = adjusted_mode->clock;
atombios_external_tmds_setup(encoder, ATOM_ENABLE);
@@ -856,7 +678,7 @@
if (radeon_crtc->crtc_id == 0) {
if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
- if (radeon_encoder->flags & RADEON_USE_RMX)
+ if (radeon_encoder->rmx_type != RMX_OFF)
fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX;
else
fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1;
@@ -1014,9 +836,6 @@
DRM_DEBUG("\n");
- if (radeon_crtc->crtc_id == 0)
- radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
if (rdev->family != CHIP_R200) {
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
if (rdev->family == CHIP_R420 ||
@@ -1243,6 +1062,7 @@
radeon_encoder->encoder_id = encoder_id;
radeon_encoder->devices = supported_device;
+ radeon_encoder->rmx_type = RMX_OFF;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 9173b68..3b09a1f 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -36,6 +36,9 @@
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
+#include "radeon_fixed.h"
+
+struct radeon_device;
#define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base)
#define to_radeon_connector(x) container_of(x, struct radeon_connector, base)
@@ -124,6 +127,7 @@
#define RADEON_PLL_PREFER_LOW_POST_DIV (1 << 8)
#define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
#define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10)
+#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
struct radeon_pll {
uint16_t reference_freq;
@@ -170,6 +174,18 @@
struct atom_context *atom_context;
enum radeon_connector_table connector_table;
bool mode_config_initialized;
+ struct radeon_crtc *crtcs[2];
+};
+
+struct radeon_native_mode {
+ /* preferred mode */
+ uint32_t panel_xres, panel_yres;
+ uint32_t hoverplus, hsync_width;
+ uint32_t hblank;
+ uint32_t voverplus, vsync_width;
+ uint32_t vblank;
+ uint32_t dotclock;
+ uint32_t flags;
};
struct radeon_crtc {
@@ -185,19 +201,13 @@
uint64_t cursor_addr;
int cursor_width;
int cursor_height;
-};
-
-#define RADEON_USE_RMX 1
-
-struct radeon_native_mode {
- /* preferred mode */
- uint32_t panel_xres, panel_yres;
- uint32_t hoverplus, hsync_width;
- uint32_t hblank;
- uint32_t voverplus, vsync_width;
- uint32_t vblank;
- uint32_t dotclock;
- uint32_t flags;
+ uint32_t legacy_display_base_addr;
+ uint32_t legacy_cursor_offset;
+ enum radeon_rmx_type rmx_type;
+ uint32_t devices;
+ fixed20_12 vsc;
+ fixed20_12 hsc;
+ struct radeon_native_mode native_mode;
};
struct radeon_encoder_primary_dac {
@@ -383,16 +393,9 @@
void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
void radeon_combios_asic_init(struct drm_device *dev);
extern int radeon_static_clocks_init(struct drm_device *dev);
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2);
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
- struct drm_display_mode *mode1,
- uint32_t pixel_bytes1,
- struct drm_display_mode *mode2,
- uint32_t pixel_bytes2);
-void radeon_init_disp_bandwidth(struct drm_device *dev);
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev);
#endif
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 983e8df..e98cae3 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -44,6 +44,9 @@
uint64_t gpu_addr;
void *kptr;
bool is_iomem;
+ uint32_t tiling_flags;
+ uint32_t pitch;
+ int surface_reg;
};
int radeon_ttm_init(struct radeon_device *rdev);
@@ -70,6 +73,7 @@
robj = container_of(tobj, struct radeon_object, tobj);
list_del_init(&robj->list);
+ radeon_object_clear_surface_reg(robj);
kfree(robj);
}
@@ -99,16 +103,16 @@
{
uint32_t flags = 0;
if (domain & RADEON_GEM_DOMAIN_VRAM) {
- flags |= TTM_PL_FLAG_VRAM;
+ flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
}
if (domain & RADEON_GEM_DOMAIN_GTT) {
- flags |= TTM_PL_FLAG_TT;
+ flags |= TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
}
if (domain & RADEON_GEM_DOMAIN_CPU) {
- flags |= TTM_PL_FLAG_SYSTEM;
+ flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
}
if (!flags) {
- flags |= TTM_PL_FLAG_SYSTEM;
+ flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
}
return flags;
}
@@ -141,6 +145,7 @@
}
robj->rdev = rdev;
robj->gobj = gobj;
+ robj->surface_reg = -1;
INIT_LIST_HEAD(&robj->list);
flags = radeon_object_flags_from_domain(domain);
@@ -223,7 +228,6 @@
{
uint32_t flags;
uint32_t tmp;
- void *fbptr;
int r;
flags = radeon_object_flags_from_domain(domain);
@@ -242,10 +246,6 @@
DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
return r;
}
- if (robj->rdev->fbdev_robj == robj) {
- mutex_lock(&robj->rdev->fbdev_info->lock);
- radeon_object_kunmap(robj);
- }
tmp = robj->tobj.mem.placement;
ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
@@ -261,23 +261,12 @@
DRM_ERROR("radeon: failed to pin object.\n");
}
radeon_object_unreserve(robj);
- if (robj->rdev->fbdev_robj == robj) {
- if (!r) {
- r = radeon_object_kmap(robj, &fbptr);
- }
- if (!r) {
- robj->rdev->fbdev_info->screen_base = fbptr;
- robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
- }
- mutex_unlock(&robj->rdev->fbdev_info->lock);
- }
return r;
}
void radeon_object_unpin(struct radeon_object *robj)
{
uint32_t flags;
- void *fbptr;
int r;
spin_lock(&robj->tobj.lock);
@@ -297,10 +286,6 @@
DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
return;
}
- if (robj->rdev->fbdev_robj == robj) {
- mutex_lock(&robj->rdev->fbdev_info->lock);
- radeon_object_kunmap(robj);
- }
flags = robj->tobj.mem.placement;
robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
r = ttm_buffer_object_validate(&robj->tobj,
@@ -310,16 +295,6 @@
DRM_ERROR("radeon: failed to unpin buffer.\n");
}
radeon_object_unreserve(robj);
- if (robj->rdev->fbdev_robj == robj) {
- if (!r) {
- r = radeon_object_kmap(robj, &fbptr);
- }
- if (!r) {
- robj->rdev->fbdev_info->screen_base = fbptr;
- robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
- }
- mutex_unlock(&robj->rdev->fbdev_info->lock);
- }
}
int radeon_object_wait(struct radeon_object *robj)
@@ -334,7 +309,7 @@
}
spin_lock(&robj->tobj.lock);
if (robj->tobj.sync_obj) {
- r = ttm_bo_wait(&robj->tobj, true, false, false);
+ r = ttm_bo_wait(&robj->tobj, true, true, false);
}
spin_unlock(&robj->tobj.lock);
radeon_object_unreserve(robj);
@@ -433,7 +408,6 @@
struct radeon_object *robj;
struct radeon_fence *old_fence = NULL;
struct list_head *i;
- uint32_t flags;
int r;
r = radeon_object_list_reserve(head);
@@ -444,27 +418,25 @@
list_for_each(i, head) {
lobj = list_entry(i, struct radeon_object_list, list);
robj = lobj->robj;
- if (lobj->wdomain) {
- flags = radeon_object_flags_from_domain(lobj->wdomain);
- flags |= TTM_PL_FLAG_TT;
- } else {
- flags = radeon_object_flags_from_domain(lobj->rdomain);
- flags |= TTM_PL_FLAG_TT;
- flags |= TTM_PL_FLAG_VRAM;
- }
if (!robj->pin_count) {
- robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING;
+ if (lobj->wdomain) {
+ robj->tobj.proposed_placement =
+ radeon_object_flags_from_domain(lobj->wdomain);
+ } else {
+ robj->tobj.proposed_placement =
+ radeon_object_flags_from_domain(lobj->rdomain);
+ }
r = ttm_buffer_object_validate(&robj->tobj,
robj->tobj.proposed_placement,
true, false);
if (unlikely(r)) {
- radeon_object_list_unreserve(head);
DRM_ERROR("radeon: failed to validate.\n");
return r;
}
radeon_object_gpu_addr(robj);
}
lobj->gpu_offset = robj->gpu_addr;
+ lobj->tiling_flags = robj->tiling_flags;
if (fence) {
old_fence = (struct radeon_fence *)robj->tobj.sync_obj;
robj->tobj.sync_obj = radeon_fence_ref(fence);
@@ -509,3 +481,127 @@
{
return robj->tobj.num_pages << PAGE_SHIFT;
}
+
+int radeon_object_get_surface_reg(struct radeon_object *robj)
+{
+ struct radeon_device *rdev = robj->rdev;
+ struct radeon_surface_reg *reg;
+ struct radeon_object *old_object;
+ int steal;
+ int i;
+
+ if (!robj->tiling_flags)
+ return 0;
+
+ if (robj->surface_reg >= 0) {
+ reg = &rdev->surface_regs[robj->surface_reg];
+ i = robj->surface_reg;
+ goto out;
+ }
+
+ steal = -1;
+ for (i = 0; i < RADEON_GEM_MAX_SURFACES; i++) {
+
+ reg = &rdev->surface_regs[i];
+ if (!reg->robj)
+ break;
+
+ old_object = reg->robj;
+ if (old_object->pin_count == 0)
+ steal = i;
+ }
+
+ /* if we are all out */
+ if (i == RADEON_GEM_MAX_SURFACES) {
+ if (steal == -1)
+ return -ENOMEM;
+ /* find someone with a surface reg and nuke their BO */
+ reg = &rdev->surface_regs[steal];
+ old_object = reg->robj;
+ /* blow away the mapping */
+ DRM_DEBUG("stealing surface reg %d from %p\n", steal, old_object);
+ ttm_bo_unmap_virtual(&old_object->tobj);
+ old_object->surface_reg = -1;
+ i = steal;
+ }
+
+ robj->surface_reg = i;
+ reg->robj = robj;
+
+out:
+ radeon_set_surface_reg(rdev, i, robj->tiling_flags, robj->pitch,
+ robj->tobj.mem.mm_node->start << PAGE_SHIFT,
+ robj->tobj.num_pages << PAGE_SHIFT);
+ return 0;
+}
+
+void radeon_object_clear_surface_reg(struct radeon_object *robj)
+{
+ struct radeon_device *rdev = robj->rdev;
+ struct radeon_surface_reg *reg;
+
+ if (robj->surface_reg == -1)
+ return;
+
+ reg = &rdev->surface_regs[robj->surface_reg];
+ radeon_clear_surface_reg(rdev, robj->surface_reg);
+
+ reg->robj = NULL;
+ robj->surface_reg = -1;
+}
+
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+ uint32_t tiling_flags, uint32_t pitch)
+{
+ robj->tiling_flags = tiling_flags;
+ robj->pitch = pitch;
+}
+
+void radeon_object_get_tiling_flags(struct radeon_object *robj,
+ uint32_t *tiling_flags,
+ uint32_t *pitch)
+{
+ if (tiling_flags)
+ *tiling_flags = robj->tiling_flags;
+ if (pitch)
+ *pitch = robj->pitch;
+}
+
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+ bool force_drop)
+{
+ if (!(robj->tiling_flags & RADEON_TILING_SURFACE))
+ return 0;
+
+ if (force_drop) {
+ radeon_object_clear_surface_reg(robj);
+ return 0;
+ }
+
+ if (robj->tobj.mem.mem_type != TTM_PL_VRAM) {
+ if (!has_moved)
+ return 0;
+
+ if (robj->surface_reg >= 0)
+ radeon_object_clear_surface_reg(robj);
+ return 0;
+ }
+
+ if ((robj->surface_reg >= 0) && !has_moved)
+ return 0;
+
+ return radeon_object_get_surface_reg(robj);
+}
+
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *mem)
+{
+ struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+ radeon_object_check_tiling(robj, 0, 1);
+}
+
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo)
+{
+ struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+ radeon_object_check_tiling(robj, 0, 0);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index a853261..60d1593 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -126,32 +126,19 @@
}
}
-static void radeon_ib_cpu_flush(struct radeon_device *rdev,
- struct radeon_ib *ib)
-{
- unsigned long tmp;
- unsigned i;
-
- /* To force CPU cache flush ugly but seems reliable */
- for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) {
- tmp = readl(&ib->ptr[i]);
- }
-}
-
int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib)
{
int r = 0;
mutex_lock(&rdev->ib_pool.mutex);
radeon_ib_align(rdev, ib);
- radeon_ib_cpu_flush(rdev, ib);
if (!ib->length_dw || !rdev->cp.ready) {
/* TODO: Nothings in the ib we should report. */
mutex_unlock(&rdev->ib_pool.mutex);
DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
return -EINVAL;
}
- /* 64 dwords should be enought for fence too */
+ /* 64 dwords should be enough for fence too */
r = radeon_ring_lock(rdev, 64);
if (r) {
DRM_ERROR("radeon: scheduling IB failled (%d).\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_share.h b/drivers/gpu/drm/radeon/radeon_share.h
new file mode 100644
index 0000000..63a7735
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_share.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RADEON_SHARE_H__
+#define __RADEON_SHARE_H__
+
+void r100_vram_init_sizes(struct radeon_device *rdev);
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+ struct drm_display_mode *mode1,
+ struct drm_display_mode *mode2);
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
new file mode 100644
index 0000000..03c33cf
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2009 VMware, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Michel Dänzer
+ */
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+
+/* Test BO GTT->VRAM and VRAM->GTT GPU copies across the whole GTT aperture */
+void radeon_test_moves(struct radeon_device *rdev)
+{
+ struct radeon_object *vram_obj = NULL;
+ struct radeon_object **gtt_obj = NULL;
+ struct radeon_fence *fence = NULL;
+ uint64_t gtt_addr, vram_addr;
+ unsigned i, n, size;
+ int r;
+
+ size = 1024 * 1024;
+
+ /* Number of tests =
+ * (Total GTT - IB pool - writeback page - ring buffer) / test size
+ */
+ n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 -
+ rdev->cp.ring_size) / size;
+
+ gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
+ if (!gtt_obj) {
+ DRM_ERROR("Failed to allocate %d pointers\n", n);
+ r = 1;
+ goto out_cleanup;
+ }
+
+ r = radeon_object_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+ false, &vram_obj);
+ if (r) {
+ DRM_ERROR("Failed to create VRAM object\n");
+ goto out_cleanup;
+ }
+
+ r = radeon_object_pin(vram_obj, RADEON_GEM_DOMAIN_VRAM, &vram_addr);
+ if (r) {
+ DRM_ERROR("Failed to pin VRAM object\n");
+ goto out_cleanup;
+ }
+
+ for (i = 0; i < n; i++) {
+ void *gtt_map, *vram_map;
+ void **gtt_start, **gtt_end;
+ void **vram_start, **vram_end;
+
+ r = radeon_object_create(rdev, NULL, size, true,
+ RADEON_GEM_DOMAIN_GTT, false, gtt_obj + i);
+ if (r) {
+ DRM_ERROR("Failed to create GTT object %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_object_pin(gtt_obj[i], RADEON_GEM_DOMAIN_GTT, >t_addr);
+ if (r) {
+ DRM_ERROR("Failed to pin GTT object %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_object_kmap(gtt_obj[i], >t_map);
+ if (r) {
+ DRM_ERROR("Failed to map GTT object %d\n", i);
+ goto out_cleanup;
+ }
+
+ for (gtt_start = gtt_map, gtt_end = gtt_map + size;
+ gtt_start < gtt_end;
+ gtt_start++)
+ *gtt_start = gtt_start;
+
+ radeon_object_kunmap(gtt_obj[i]);
+
+ r = radeon_fence_create(rdev, &fence);
+ if (r) {
+ DRM_ERROR("Failed to create GTT->VRAM fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence);
+ if (r) {
+ DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_fence_wait(fence, false);
+ if (r) {
+ DRM_ERROR("Failed to wait for GTT->VRAM fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ radeon_fence_unref(&fence);
+
+ r = radeon_object_kmap(vram_obj, &vram_map);
+ if (r) {
+ DRM_ERROR("Failed to map VRAM object after copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+ vram_start = vram_map, vram_end = vram_map + size;
+ vram_start < vram_end;
+ gtt_start++, vram_start++) {
+ if (*vram_start != gtt_start) {
+ DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, "
+ "expected 0x%p (GTT map 0x%p-0x%p)\n",
+ i, *vram_start, gtt_start, gtt_map,
+ gtt_end);
+ radeon_object_kunmap(vram_obj);
+ goto out_cleanup;
+ }
+ *vram_start = vram_start;
+ }
+
+ radeon_object_kunmap(vram_obj);
+
+ r = radeon_fence_create(rdev, &fence);
+ if (r) {
+ DRM_ERROR("Failed to create VRAM->GTT fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence);
+ if (r) {
+ DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ r = radeon_fence_wait(fence, false);
+ if (r) {
+ DRM_ERROR("Failed to wait for VRAM->GTT fence %d\n", i);
+ goto out_cleanup;
+ }
+
+ radeon_fence_unref(&fence);
+
+ r = radeon_object_kmap(gtt_obj[i], >t_map);
+ if (r) {
+ DRM_ERROR("Failed to map GTT object after copy %d\n", i);
+ goto out_cleanup;
+ }
+
+ for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+ vram_start = vram_map, vram_end = vram_map + size;
+ gtt_start < gtt_end;
+ gtt_start++, vram_start++) {
+ if (*gtt_start != vram_start) {
+ DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, "
+ "expected 0x%p (VRAM map 0x%p-0x%p)\n",
+ i, *gtt_start, vram_start, vram_map,
+ vram_end);
+ radeon_object_kunmap(gtt_obj[i]);
+ goto out_cleanup;
+ }
+ }
+
+ radeon_object_kunmap(gtt_obj[i]);
+
+ DRM_INFO("Tested GTT->VRAM and VRAM->GTT copy for GTT offset 0x%llx\n",
+ gtt_addr - rdev->mc.gtt_location);
+ }
+
+out_cleanup:
+ if (vram_obj) {
+ radeon_object_unpin(vram_obj);
+ radeon_object_unref(&vram_obj);
+ }
+ if (gtt_obj) {
+ for (i = 0; i < n; i++) {
+ if (gtt_obj[i]) {
+ radeon_object_unpin(gtt_obj[i]);
+ radeon_object_unref(>t_obj[i]);
+ }
+ }
+ kfree(gtt_obj);
+ }
+ if (fence) {
+ radeon_fence_unref(&fence);
+ }
+ if (r) {
+ printk(KERN_WARNING "Error while testing BO move.\n");
+ }
+}
+
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 1227a97..15c3531 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -355,23 +355,26 @@
if (!rdev->cp.ready) {
/* use memcpy */
DRM_ERROR("CP is not ready use memcpy.\n");
- return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ goto memcpy;
}
if (old_mem->mem_type == TTM_PL_VRAM &&
new_mem->mem_type == TTM_PL_SYSTEM) {
- return radeon_move_vram_ram(bo, evict, interruptible,
+ r = radeon_move_vram_ram(bo, evict, interruptible,
no_wait, new_mem);
} else if (old_mem->mem_type == TTM_PL_SYSTEM &&
new_mem->mem_type == TTM_PL_VRAM) {
- return radeon_move_ram_vram(bo, evict, interruptible,
+ r = radeon_move_ram_vram(bo, evict, interruptible,
no_wait, new_mem);
} else {
r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem);
- if (unlikely(r)) {
- return r;
- }
}
+
+ if (r) {
+memcpy:
+ r = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+ }
+
return r;
}
@@ -429,6 +432,8 @@
.sync_obj_flush = &radeon_sync_obj_flush,
.sync_obj_unref = &radeon_sync_obj_unref,
.sync_obj_ref = &radeon_sync_obj_ref,
+ .move_notify = &radeon_bo_move_notify,
+ .fault_reserve_notify = &radeon_bo_fault_reserve_notify,
};
int radeon_ttm_init(struct radeon_device *rdev)
@@ -442,13 +447,14 @@
/* No others user of address space so set it to 0 */
r = ttm_bo_device_init(&rdev->mman.bdev,
rdev->mman.mem_global_ref.object,
- &radeon_bo_driver, DRM_FILE_PAGE_OFFSET);
+ &radeon_bo_driver, DRM_FILE_PAGE_OFFSET,
+ rdev->need_dma32);
if (r) {
DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
return r;
}
r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0,
- ((rdev->mc.aper_size) >> PAGE_SHIFT));
+ ((rdev->mc.real_vram_size) >> PAGE_SHIFT));
if (r) {
DRM_ERROR("Failed initializing VRAM heap.\n");
return r;
@@ -465,7 +471,7 @@
return r;
}
DRM_INFO("radeon: %uM of VRAM memory ready\n",
- rdev->mc.vram_size / (1024 * 1024));
+ rdev->mc.real_vram_size / (1024 * 1024));
r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0,
((rdev->mc.gtt_size) >> PAGE_SHIFT));
if (r) {
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index cc074b5..b29affd 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -29,6 +29,7 @@
#include <drm/drmP.h>
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_share.h"
/* rs400,rs480 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
@@ -164,7 +165,9 @@
WREG32(RADEON_BUS_CNTL, tmp);
}
/* Table should be in 32bits address space so ignore bits above. */
- tmp = rdev->gart.table_addr & 0xfffff000;
+ tmp = (u32)rdev->gart.table_addr & 0xfffff000;
+ tmp |= (upper_32_bits(rdev->gart.table_addr) & 0xff) << 4;
+
WREG32_MC(RS480_GART_BASE, tmp);
/* TODO: more tweaking here */
WREG32_MC(RS480_GART_FEATURE_ID,
@@ -201,10 +204,17 @@
int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
{
+ uint32_t entry;
+
if (i < 0 || i > rdev->gart.num_gpu_pages) {
return -EINVAL;
}
- rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC);
+
+ entry = (lower_32_bits(addr) & PAGE_MASK) |
+ ((upper_32_bits(addr) & 0xff) << 4) |
+ 0xc;
+ entry = cpu_to_le32(entry);
+ rdev->gart.table.ram.ptr[i] = entry;
return 0;
}
@@ -223,10 +233,9 @@
rs400_gpu_init(rdev);
rs400_gart_disable(rdev);
- rdev->mc.gtt_location = rdev->mc.vram_size;
+ rdev->mc.gtt_location = rdev->mc.mc_vram_size;
rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
- rdev->mc.vram_location = 0xFFFFFFFFUL;
r = radeon_mc_setup(rdev);
if (r) {
return r;
@@ -238,7 +247,7 @@
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -284,21 +293,12 @@
*/
void rs400_vram_info(struct radeon_device *rdev)
{
- uint32_t tom;
-
rs400_gart_adjust_size(rdev);
/* DDR for all card after R300 & IGP */
rdev->mc.vram_is_ddr = true;
rdev->mc.vram_width = 128;
- /* read NB_TOM to get the amount of ram stolen for the GPU */
- tom = RREG32(RADEON_NB_TOM);
- rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-
- /* Could aper size report 0 ? */
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ r100_vram_init_sizes(rdev);
}
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index ab0c967..bbea6dee 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -223,7 +223,7 @@
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32_MC(RS600_MC_FB_LOCATION, tmp);
@@ -301,6 +301,11 @@
rdev->mc.vram_width = 128;
}
+void rs600_bandwidth_update(struct radeon_device *rdev)
+{
+ /* FIXME: implement, should this be like rs690 ? */
+}
+
/*
* Indirect registers accessor
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 79ba850..839595b 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -28,6 +28,9 @@
#include "drmP.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "rs690r.h"
+#include "atom.h"
+#include "atom-bits.h"
/* rs690,rs740 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
@@ -64,7 +67,7 @@
rs400_gart_disable(rdev);
/* Setup GPU memory space */
- rdev->mc.gtt_location = rdev->mc.vram_size;
+ rdev->mc.gtt_location = rdev->mc.mc_vram_size;
rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
rdev->mc.vram_location = 0xFFFFFFFFUL;
@@ -79,7 +82,7 @@
printk(KERN_WARNING "Failed to wait MC idle while "
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
@@ -138,9 +141,82 @@
/*
* VRAM info.
*/
+void rs690_pm_info(struct radeon_device *rdev)
+{
+ int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+ struct _ATOM_INTEGRATED_SYSTEM_INFO *info;
+ struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2;
+ void *ptr;
+ uint16_t data_offset;
+ uint8_t frev, crev;
+ fixed20_12 tmp;
+
+ atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
+ &frev, &crev, &data_offset);
+ ptr = rdev->mode_info.atom_context->bios + data_offset;
+ info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr;
+ info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr;
+ /* Get various system informations from bios */
+ switch (crev) {
+ case 1:
+ tmp.full = rfixed_const(100);
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock);
+ rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+ rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock));
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock));
+ rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth);
+ break;
+ case 2:
+ tmp.full = rfixed_const(100);
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock);
+ rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+ rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock);
+ rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq);
+ rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
+ rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth));
+ break;
+ default:
+ tmp.full = rfixed_const(100);
+ /* We assume the slower possible clock ie worst case */
+ /* DDR 333Mhz */
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(333);
+ /* FIXME: system clock ? */
+ rdev->pm.igp_system_mclk.full = rfixed_const(100);
+ rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
+ rdev->pm.igp_ht_link_width.full = rfixed_const(8);
+ DRM_ERROR("No integrated system info for your GPU, using safe default\n");
+ break;
+ }
+ /* Compute various bandwidth */
+ /* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4 */
+ tmp.full = rfixed_const(4);
+ rdev->pm.k8_bandwidth.full = rfixed_mul(rdev->pm.igp_system_mclk, tmp);
+ /* ht_bandwidth = ht_clk * 2 * ht_width / 8 * 0.8
+ * = ht_clk * ht_width / 5
+ */
+ tmp.full = rfixed_const(5);
+ rdev->pm.ht_bandwidth.full = rfixed_mul(rdev->pm.igp_ht_link_clk,
+ rdev->pm.igp_ht_link_width);
+ rdev->pm.ht_bandwidth.full = rfixed_div(rdev->pm.ht_bandwidth, tmp);
+ if (tmp.full < rdev->pm.max_bandwidth.full) {
+ /* HT link is a limiting factor */
+ rdev->pm.max_bandwidth.full = tmp.full;
+ }
+ /* sideport_bandwidth = (sideport_clk / 2) * 2 * 2 * 0.7
+ * = (sideport_clk * 14) / 10
+ */
+ tmp.full = rfixed_const(14);
+ rdev->pm.sideport_bandwidth.full = rfixed_mul(rdev->pm.igp_sideport_mclk, tmp);
+ tmp.full = rfixed_const(10);
+ rdev->pm.sideport_bandwidth.full = rfixed_div(rdev->pm.sideport_bandwidth, tmp);
+}
+
void rs690_vram_info(struct radeon_device *rdev)
{
uint32_t tmp;
+ fixed20_12 a;
rs400_gart_adjust_size(rdev);
/* DDR for all card after R300 & IGP */
@@ -152,12 +228,409 @@
} else {
rdev->mc.vram_width = 64;
}
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ rs690_pm_info(rdev);
+ /* FIXME: we should enforce default clock in case GPU is not in
+ * default setup
+ */
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ a.full = rfixed_const(16);
+ /* core_bandwidth = sclk(Mhz) * 16 */
+ rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
}
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+ struct drm_display_mode *mode1,
+ struct drm_display_mode *mode2)
+{
+ u32 tmp;
+
+ /*
+ * Line Buffer Setup
+ * There is a single line buffer shared by both display controllers.
+ * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+ * the display controllers. The paritioning can either be done
+ * manually or via one of four preset allocations specified in bits 1:0:
+ * 0 - line buffer is divided in half and shared between crtc
+ * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
+ * 2 - D1 gets the whole buffer
+ * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
+ * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+ * allocation mode. In manual allocation mode, D1 always starts at 0,
+ * D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
+ */
+ tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
+ tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+ /* auto */
+ if (mode1 && mode2) {
+ if (mode1->hdisplay > mode2->hdisplay) {
+ if (mode1->hdisplay > 2560)
+ tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+ else
+ tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ } else if (mode2->hdisplay > mode1->hdisplay) {
+ if (mode2->hdisplay > 2560)
+ tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+ else
+ tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ } else
+ tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ } else if (mode1) {
+ tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+ } else if (mode2) {
+ tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+ }
+ WREG32(DC_LB_MEMORY_SPLIT, tmp);
+}
+
+struct rs690_watermark {
+ u32 lb_request_fifo_depth;
+ fixed20_12 num_line_pair;
+ fixed20_12 estimated_width;
+ fixed20_12 worst_case_latency;
+ fixed20_12 consumption_rate;
+ fixed20_12 active_time;
+ fixed20_12 dbpp;
+ fixed20_12 priority_mark_max;
+ fixed20_12 priority_mark;
+ fixed20_12 sclk;
+};
+
+void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
+ struct radeon_crtc *crtc,
+ struct rs690_watermark *wm)
+{
+ struct drm_display_mode *mode = &crtc->base.mode;
+ fixed20_12 a, b, c;
+ fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+ fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+ /* FIXME: detect IGP with sideport memory, i don't think there is any
+ * such product available
+ */
+ bool sideport = false;
+
+ if (!crtc->base.enabled) {
+ /* FIXME: wouldn't it better to set priority mark to maximum */
+ wm->lb_request_fifo_depth = 4;
+ return;
+ }
+
+ if (crtc->vsc.full > rfixed_const(2))
+ wm->num_line_pair.full = rfixed_const(2);
+ else
+ wm->num_line_pair.full = rfixed_const(1);
+
+ b.full = rfixed_const(mode->crtc_hdisplay);
+ c.full = rfixed_const(256);
+ a.full = rfixed_mul(wm->num_line_pair, b);
+ request_fifo_depth.full = rfixed_div(a, c);
+ if (a.full < rfixed_const(4)) {
+ wm->lb_request_fifo_depth = 4;
+ } else {
+ wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+ }
+
+ /* Determine consumption rate
+ * pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+ * vtaps = number of vertical taps,
+ * vsc = vertical scaling ratio, defined as source/destination
+ * hsc = horizontal scaling ration, defined as source/destination
+ */
+ a.full = rfixed_const(mode->clock);
+ b.full = rfixed_const(1000);
+ a.full = rfixed_div(a, b);
+ pclk.full = rfixed_div(b, a);
+ if (crtc->rmx_type != RMX_OFF) {
+ b.full = rfixed_const(2);
+ if (crtc->vsc.full > b.full)
+ b.full = crtc->vsc.full;
+ b.full = rfixed_mul(b, crtc->hsc);
+ c.full = rfixed_const(2);
+ b.full = rfixed_div(b, c);
+ consumption_time.full = rfixed_div(pclk, b);
+ } else {
+ consumption_time.full = pclk.full;
+ }
+ a.full = rfixed_const(1);
+ wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+ /* Determine line time
+ * LineTime = total time for one line of displayhtotal
+ * LineTime = total number of horizontal pixels
+ * pclk = pixel clock period(ns)
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ line_time.full = rfixed_mul(a, pclk);
+
+ /* Determine active time
+ * ActiveTime = time of active region of display within one line,
+ * hactive = total number of horizontal active pixels
+ * htotal = total number of horizontal pixels
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->active_time.full = rfixed_mul(line_time, b);
+ wm->active_time.full = rfixed_div(wm->active_time, a);
+
+ /* Maximun bandwidth is the minimun bandwidth of all component */
+ rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
+ if (sideport) {
+ if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
+ rdev->pm.sideport_bandwidth.full)
+ rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
+ read_delay_latency.full = rfixed_const(370 * 800 * 1000);
+ read_delay_latency.full = rfixed_div(read_delay_latency,
+ rdev->pm.igp_sideport_mclk);
+ } else {
+ if (rdev->pm.max_bandwidth.full > rdev->pm.k8_bandwidth.full &&
+ rdev->pm.k8_bandwidth.full)
+ rdev->pm.max_bandwidth = rdev->pm.k8_bandwidth;
+ if (rdev->pm.max_bandwidth.full > rdev->pm.ht_bandwidth.full &&
+ rdev->pm.ht_bandwidth.full)
+ rdev->pm.max_bandwidth = rdev->pm.ht_bandwidth;
+ read_delay_latency.full = rfixed_const(5000);
+ }
+
+ /* sclk = system clocks(ns) = 1000 / max_bandwidth / 16 */
+ a.full = rfixed_const(16);
+ rdev->pm.sclk.full = rfixed_mul(rdev->pm.max_bandwidth, a);
+ a.full = rfixed_const(1000);
+ rdev->pm.sclk.full = rfixed_div(a, rdev->pm.sclk);
+ /* Determine chunk time
+ * ChunkTime = the time it takes the DCP to send one chunk of data
+ * to the LB which consists of pipeline delay and inter chunk gap
+ * sclk = system clock(ns)
+ */
+ a.full = rfixed_const(256 * 13);
+ chunk_time.full = rfixed_mul(rdev->pm.sclk, a);
+ a.full = rfixed_const(10);
+ chunk_time.full = rfixed_div(chunk_time, a);
+
+ /* Determine the worst case latency
+ * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+ * WorstCaseLatency = worst case time from urgent to when the MC starts
+ * to return data
+ * READ_DELAY_IDLE_MAX = constant of 1us
+ * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+ * which consists of pipeline delay and inter chunk gap
+ */
+ if (rfixed_trunc(wm->num_line_pair) > 1) {
+ a.full = rfixed_const(3);
+ wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+ wm->worst_case_latency.full += read_delay_latency.full;
+ } else {
+ a.full = rfixed_const(2);
+ wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+ wm->worst_case_latency.full += read_delay_latency.full;
+ }
+
+ /* Determine the tolerable latency
+ * TolerableLatency = Any given request has only 1 line time
+ * for the data to be returned
+ * LBRequestFifoDepth = Number of chunk requests the LB can
+ * put into the request FIFO for a display
+ * LineTime = total time for one line of display
+ * ChunkTime = the time it takes the DCP to send one chunk
+ * of data to the LB which consists of
+ * pipeline delay and inter chunk gap
+ */
+ if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+ tolerable_latency.full = line_time.full;
+ } else {
+ tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+ tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+ tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+ tolerable_latency.full = line_time.full - tolerable_latency.full;
+ }
+ /* We assume worst case 32bits (4 bytes) */
+ wm->dbpp.full = rfixed_const(4 * 8);
+
+ /* Determine the maximum priority mark
+ * width = viewport width in pixels
+ */
+ a.full = rfixed_const(16);
+ wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+ /* Determine estimated width */
+ estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+ estimated_width.full = rfixed_div(estimated_width, consumption_time);
+ if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+ wm->priority_mark.full = rfixed_const(10);
+ } else {
+ a.full = rfixed_const(16);
+ wm->priority_mark.full = rfixed_div(estimated_width, a);
+ wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+ }
+}
+
+void rs690_bandwidth_update(struct radeon_device *rdev)
+{
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+ struct rs690_watermark wm0;
+ struct rs690_watermark wm1;
+ u32 tmp;
+ fixed20_12 priority_mark02, priority_mark12, fill_rate;
+ fixed20_12 a, b;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+ /*
+ * Set display0/1 priority up in the memory controller for
+ * modes if the user specifies HIGH for displaypriority
+ * option.
+ */
+ if (rdev->disp_priority == 2) {
+ tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
+ tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+ tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+ if (mode1)
+ tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+ if (mode0)
+ tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+ WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+ }
+ rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+ if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
+ WREG32(DCP_CONTROL, 0);
+ if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
+ WREG32(DCP_CONTROL, 2);
+
+ rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+ rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+ tmp = (wm0.lb_request_fifo_depth - 1);
+ tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
+ WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+ if (mode0 && mode1) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ b.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+ else
+ b.full = wm1.num_line_pair.full;
+ a.full += b.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ } else if (mode0) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ } else {
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+ else
+ a.full = wm1.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm1.sclk, a);
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ a.full = a.full + b.full;
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ }
+}
/*
* Indirect registers accessor
diff --git a/drivers/gpu/drm/radeon/rs690r.h b/drivers/gpu/drm/radeon/rs690r.h
new file mode 100644
index 0000000..c0d9faa
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs690r.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef RS690R_H
+#define RS690R_H
+
+/* RS690/RS740 registers */
+#define MC_INDEX 0x0078
+# define MC_INDEX_MASK 0x1FF
+# define MC_INDEX_WR_EN (1 << 9)
+# define MC_INDEX_WR_ACK 0x7F
+#define MC_DATA 0x007C
+#define HDP_FB_LOCATION 0x0134
+#define DC_LB_MEMORY_SPLIT 0x6520
+#define DC_LB_MEMORY_SPLIT_MASK 0x00000003
+#define DC_LB_MEMORY_SPLIT_SHIFT 0
+#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0
+#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1
+#define DC_LB_MEMORY_SPLIT_D1_ONLY 2
+#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3
+#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2)
+#define DC_LB_DISP1_END_ADR_SHIFT 4
+#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0
+#define D1MODE_PRIORITY_A_CNT 0x6548
+#define MODE_PRIORITY_MARK_MASK 0x00007FFF
+#define MODE_PRIORITY_OFF (1 << 16)
+#define MODE_PRIORITY_ALWAYS_ON (1 << 20)
+#define MODE_PRIORITY_FORCE_MASK (1 << 24)
+#define D1MODE_PRIORITY_B_CNT 0x654C
+#define LB_MAX_REQ_OUTSTANDING 0x6D58
+#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F
+#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0
+#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000
+#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16
+#define DCP_CONTROL 0x6C9C
+#define D2MODE_PRIORITY_A_CNT 0x6D48
+#define D2MODE_PRIORITY_B_CNT 0x6D4C
+
+/* MC indirect registers */
+#define MC_STATUS_IDLE (1 << 0)
+#define MC_MISC_CNTL 0x18
+#define DISABLE_GTW (1 << 1)
+#define GART_INDEX_REG_EN (1 << 12)
+#define BLOCK_GFX_D3_EN (1 << 14)
+#define GART_FEATURE_ID 0x2B
+#define HANG_EN (1 << 11)
+#define TLB_ENABLE (1 << 18)
+#define P2P_ENABLE (1 << 19)
+#define GTW_LAC_EN (1 << 25)
+#define LEVEL2_GART (0 << 30)
+#define LEVEL1_GART (1 << 30)
+#define PDC_EN (1 << 31)
+#define GART_BASE 0x2C
+#define GART_CACHE_CNTRL 0x2E
+# define GART_CACHE_INVALIDATE (1 << 0)
+#define MC_STATUS 0x90
+#define MCCFG_FB_LOCATION 0x100
+#define MC_FB_START_MASK 0x0000FFFF
+#define MC_FB_START_SHIFT 0
+#define MC_FB_TOP_MASK 0xFFFF0000
+#define MC_FB_TOP_SHIFT 16
+#define MCCFG_AGP_LOCATION 0x101
+#define MC_AGP_START_MASK 0x0000FFFF
+#define MC_AGP_START_SHIFT 0
+#define MC_AGP_TOP_MASK 0xFFFF0000
+#define MC_AGP_TOP_SHIFT 16
+#define MCCFG_AGP_BASE 0x102
+#define MCCFG_AGP_BASE_2 0x103
+#define MC_INIT_MISC_LAT_TIMER 0x104
+#define MC_DISP0R_INIT_LAT_SHIFT 8
+#define MC_DISP0R_INIT_LAT_MASK 0x00000F00
+#define MC_DISP1R_INIT_LAT_SHIFT 12
+#define MC_DISP1R_INIT_LAT_MASK 0x0000F000
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index ffea37b..fd8f3ca 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -27,8 +27,9 @@
*/
#include <linux/seq_file.h>
#include "drmP.h"
-#include "radeon_reg.h"
+#include "rv515r.h"
#include "radeon.h"
+#include "radeon_share.h"
/* rv515 depends on : */
void r100_hdp_reset(struct radeon_device *rdev);
@@ -99,26 +100,26 @@
"programming pipes. Bad things might happen.\n");
}
/* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
- tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+ WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
WREG32(0x134, tmp);
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
- tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32_MC(RV515_MC_FB_LOCATION, tmp);
- WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
+ tmp = REG_SET(MC_FB_TOP, tmp >> 16);
+ tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
+ WREG32_MC(MC_FB_LOCATION, tmp);
+ WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
WREG32(0x310, rdev->mc.vram_location);
if (rdev->flags & RADEON_IS_AGP) {
tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16);
- tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16);
- WREG32_MC(RV515_MC_AGP_LOCATION, tmp);
- WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base);
- WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+ tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
+ tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
+ WREG32_MC(MC_AGP_LOCATION, tmp);
+ WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
+ WREG32_MC(MC_AGP_BASE_2, 0);
} else {
- WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF);
- WREG32_MC(RV515_MC_AGP_BASE, 0);
- WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+ WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
+ WREG32_MC(MC_AGP_BASE, 0);
+ WREG32_MC(MC_AGP_BASE_2, 0);
}
return 0;
}
@@ -136,95 +137,67 @@
*/
void rv515_ring_start(struct radeon_device *rdev)
{
- unsigned gb_tile_config;
int r;
- /* Sub pixel 1/12 so we can have 4K rendering according to doc */
- gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16;
- switch (rdev->num_gb_pipes) {
- case 2:
- gb_tile_config |= R300_PIPE_COUNT_R300;
- break;
- case 3:
- gb_tile_config |= R300_PIPE_COUNT_R420_3P;
- break;
- case 4:
- gb_tile_config |= R300_PIPE_COUNT_R420;
- break;
- case 1:
- default:
- gb_tile_config |= R300_PIPE_COUNT_RV350;
- break;
- }
-
r = radeon_ring_lock(rdev, 64);
if (r) {
return;
}
- radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
+ radeon_ring_write(rdev, PACKET0(ISYNC_CNTL, 0));
radeon_ring_write(rdev,
- RADEON_ISYNC_ANY2D_IDLE3D |
- RADEON_ISYNC_ANY3D_IDLE2D |
- RADEON_ISYNC_WAIT_IDLEGUI |
- RADEON_ISYNC_CPSCRATCH_IDLEGUI);
- radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
- radeon_ring_write(rdev, gb_tile_config);
- radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
- radeon_ring_write(rdev,
- RADEON_WAIT_2D_IDLECLEAN |
- RADEON_WAIT_3D_IDLECLEAN);
+ ISYNC_ANY2D_IDLE3D |
+ ISYNC_ANY3D_IDLE2D |
+ ISYNC_WAIT_IDLEGUI |
+ ISYNC_CPSCRATCH_IDLEGUI);
+ radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+ radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
radeon_ring_write(rdev, PACKET0(0x170C, 0));
radeon_ring_write(rdev, 1 << 31);
- radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+ radeon_ring_write(rdev, PACKET0(GB_SELECT, 0));
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+ radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0));
radeon_ring_write(rdev, 0);
radeon_ring_write(rdev, PACKET0(0x42C8, 0));
radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1);
- radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0));
+ radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0));
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
- radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
- radeon_ring_write(rdev,
- RADEON_WAIT_2D_IDLECLEAN |
- RADEON_WAIT_3D_IDLECLEAN);
- radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+ radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+ radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+ radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+ radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
+ radeon_ring_write(rdev, PACKET0(GB_AA_CONFIG, 0));
radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
- radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
- radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
- radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
+ radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+ radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+ radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+ radeon_ring_write(rdev, PACKET0(GB_MSPOS0, 0));
radeon_ring_write(rdev,
- ((6 << R300_MS_X0_SHIFT) |
- (6 << R300_MS_Y0_SHIFT) |
- (6 << R300_MS_X1_SHIFT) |
- (6 << R300_MS_Y1_SHIFT) |
- (6 << R300_MS_X2_SHIFT) |
- (6 << R300_MS_Y2_SHIFT) |
- (6 << R300_MSBD0_Y_SHIFT) |
- (6 << R300_MSBD0_X_SHIFT)));
- radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
+ ((6 << MS_X0_SHIFT) |
+ (6 << MS_Y0_SHIFT) |
+ (6 << MS_X1_SHIFT) |
+ (6 << MS_Y1_SHIFT) |
+ (6 << MS_X2_SHIFT) |
+ (6 << MS_Y2_SHIFT) |
+ (6 << MSBD0_Y_SHIFT) |
+ (6 << MSBD0_X_SHIFT)));
+ radeon_ring_write(rdev, PACKET0(GB_MSPOS1, 0));
radeon_ring_write(rdev,
- ((6 << R300_MS_X3_SHIFT) |
- (6 << R300_MS_Y3_SHIFT) |
- (6 << R300_MS_X4_SHIFT) |
- (6 << R300_MS_Y4_SHIFT) |
- (6 << R300_MS_X5_SHIFT) |
- (6 << R300_MS_Y5_SHIFT) |
- (6 << R300_MSBD1_SHIFT)));
- radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
- radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
- radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
- radeon_ring_write(rdev,
- R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
- radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
- radeon_ring_write(rdev,
- R300_GEOMETRY_ROUND_NEAREST |
- R300_COLOR_ROUND_NEAREST);
+ ((6 << MS_X3_SHIFT) |
+ (6 << MS_Y3_SHIFT) |
+ (6 << MS_X4_SHIFT) |
+ (6 << MS_Y4_SHIFT) |
+ (6 << MS_X5_SHIFT) |
+ (6 << MS_Y5_SHIFT) |
+ (6 << MSBD1_SHIFT)));
+ radeon_ring_write(rdev, PACKET0(GA_ENHANCE, 0));
+ radeon_ring_write(rdev, GA_DEADLOCK_CNTL | GA_FASTSYNC_CNTL);
+ radeon_ring_write(rdev, PACKET0(GA_POLY_MODE, 0));
+ radeon_ring_write(rdev, FRONT_PTYPE_TRIANGE | BACK_PTYPE_TRIANGE);
+ radeon_ring_write(rdev, PACKET0(GA_ROUND_MODE, 0));
+ radeon_ring_write(rdev, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST);
radeon_ring_write(rdev, PACKET0(0x20C8, 0));
radeon_ring_write(rdev, 0);
radeon_ring_unlock_commit(rdev);
@@ -242,8 +215,8 @@
for (i = 0; i < rdev->usec_timeout; i++) {
/* read MC_STATUS */
- tmp = RREG32_MC(RV515_MC_STATUS);
- if (tmp & RV515_MC_STATUS_IDLE) {
+ tmp = RREG32_MC(MC_STATUS);
+ if (tmp & MC_STATUS_IDLE) {
return 0;
}
DRM_UDELAY(1);
@@ -291,33 +264,33 @@
reinit_cp = rdev->cp.ready;
rdev->cp.ready = false;
for (i = 0; i < rdev->usec_timeout; i++) {
- WREG32(RADEON_CP_CSQ_MODE, 0);
- WREG32(RADEON_CP_CSQ_CNTL, 0);
- WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
- (void)RREG32(RADEON_RBBM_SOFT_RESET);
+ WREG32(CP_CSQ_MODE, 0);
+ WREG32(CP_CSQ_CNTL, 0);
+ WREG32(RBBM_SOFT_RESET, 0x32005);
+ (void)RREG32(RBBM_SOFT_RESET);
udelay(200);
- WREG32(RADEON_RBBM_SOFT_RESET, 0);
+ WREG32(RBBM_SOFT_RESET, 0);
/* Wait to prevent race in RBBM_STATUS */
mdelay(1);
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
if (tmp & ((1 << 20) | (1 << 26))) {
DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp);
/* GA still busy soft reset it */
WREG32(0x429C, 0x200);
- WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+ WREG32(VAP_PVS_STATE_FLUSH_REG, 0);
WREG32(0x43E0, 0);
WREG32(0x43E4, 0);
WREG32(0x24AC, 0);
}
/* Wait to prevent race in RBBM_STATUS */
mdelay(1);
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
if (!(tmp & ((1 << 20) | (1 << 26)))) {
break;
}
}
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
if (!(tmp & ((1 << 20) | (1 << 26)))) {
DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
tmp);
@@ -331,7 +304,7 @@
}
DRM_UDELAY(1);
}
- tmp = RREG32(RADEON_RBBM_STATUS);
+ tmp = RREG32(RBBM_STATUS);
DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
return -1;
}
@@ -341,7 +314,7 @@
uint32_t status;
/* reset order likely matter */
- status = RREG32(RADEON_RBBM_STATUS);
+ status = RREG32(RBBM_STATUS);
/* reset HDP */
r100_hdp_reset(rdev);
/* reset rb2d */
@@ -353,12 +326,12 @@
rv515_ga_reset(rdev);
}
/* reset CP */
- status = RREG32(RADEON_RBBM_STATUS);
+ status = RREG32(RBBM_STATUS);
if (status & (1 << 16)) {
r100_cp_reset(rdev);
}
/* Check if GPU is idle */
- status = RREG32(RADEON_RBBM_STATUS);
+ status = RREG32(RBBM_STATUS);
if (status & (1 << 31)) {
DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
return -1;
@@ -377,8 +350,7 @@
rdev->mc.vram_width = 128;
rdev->mc.vram_is_ddr = true;
- tmp = RREG32_MC(RV515_MC_CNTL);
- tmp &= RV515_MEM_NUM_CHANNELS_MASK;
+ tmp = RREG32_MC(RV515_MC_CNTL) & MEM_NUM_CHANNELS_MASK;
switch (tmp) {
case 0:
rdev->mc.vram_width = 64;
@@ -394,11 +366,17 @@
void rv515_vram_info(struct radeon_device *rdev)
{
- rv515_vram_get_type(rdev);
- rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+ fixed20_12 a;
- rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
- rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+ rv515_vram_get_type(rdev);
+
+ r100_vram_init_sizes(rdev);
+ /* FIXME: we should enforce default clock in case GPU is not in
+ * default setup
+ */
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
}
@@ -409,35 +387,35 @@
{
uint32_t r;
- WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
- r = RREG32(R520_MC_IND_DATA);
- WREG32(R520_MC_IND_INDEX, 0);
+ WREG32(MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
+ r = RREG32(MC_IND_DATA);
+ WREG32(MC_IND_INDEX, 0);
return r;
}
void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
- WREG32(R520_MC_IND_DATA, (v));
- WREG32(R520_MC_IND_INDEX, 0);
+ WREG32(MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
+ WREG32(MC_IND_DATA, (v));
+ WREG32(MC_IND_INDEX, 0);
}
uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
{
uint32_t r;
- WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
- (void)RREG32(RADEON_PCIE_INDEX);
- r = RREG32(RADEON_PCIE_DATA);
+ WREG32(PCIE_INDEX, ((reg) & 0x7ff));
+ (void)RREG32(PCIE_INDEX);
+ r = RREG32(PCIE_DATA);
return r;
}
void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
- (void)RREG32(RADEON_PCIE_INDEX);
- WREG32(RADEON_PCIE_DATA, (v));
- (void)RREG32(RADEON_PCIE_DATA);
+ WREG32(PCIE_INDEX, ((reg) & 0x7ff));
+ (void)RREG32(PCIE_INDEX);
+ WREG32(PCIE_DATA, (v));
+ (void)RREG32(PCIE_DATA);
}
@@ -452,13 +430,13 @@
struct radeon_device *rdev = dev->dev_private;
uint32_t tmp;
- tmp = RREG32(R400_GB_PIPE_SELECT);
+ tmp = RREG32(GB_PIPE_SELECT);
seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
- tmp = RREG32(R500_SU_REG_DEST);
+ tmp = RREG32(SU_REG_DEST);
seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp);
- tmp = RREG32(R300_GB_TILE_CONFIG);
+ tmp = RREG32(GB_TILE_CONFIG);
seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
- tmp = RREG32(R300_DST_PIPE_CONFIG);
+ tmp = RREG32(DST_PIPE_CONFIG);
seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
return 0;
}
@@ -509,9 +487,9 @@
/*
* Asic initialization
*/
-static const unsigned r500_reg_safe_bm[159] = {
+static const unsigned r500_reg_safe_bm[219] = {
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -549,14 +527,575 @@
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
- 0x0003FC01, 0x3FFFFCF8, 0xFE800B19,
+ 0x0003FC01, 0x3FFFFCF8, 0xFE800B19, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
};
-
-
int rv515_init(struct radeon_device *rdev)
{
rdev->config.r300.reg_safe_bm = r500_reg_safe_bm;
rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm);
return 0;
}
+
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
+{
+
+ WREG32(0x659C, 0x0);
+ WREG32(0x6594, 0x705);
+ WREG32(0x65A4, 0x10001);
+ WREG32(0x65D8, 0x0);
+ WREG32(0x65B0, 0x0);
+ WREG32(0x65C0, 0x0);
+ WREG32(0x65D4, 0x0);
+ WREG32(0x6578, 0x0);
+ WREG32(0x657C, 0x841880A8);
+ WREG32(0x6578, 0x1);
+ WREG32(0x657C, 0x84208680);
+ WREG32(0x6578, 0x2);
+ WREG32(0x657C, 0xBFF880B0);
+ WREG32(0x6578, 0x100);
+ WREG32(0x657C, 0x83D88088);
+ WREG32(0x6578, 0x101);
+ WREG32(0x657C, 0x84608680);
+ WREG32(0x6578, 0x102);
+ WREG32(0x657C, 0xBFF080D0);
+ WREG32(0x6578, 0x200);
+ WREG32(0x657C, 0x83988068);
+ WREG32(0x6578, 0x201);
+ WREG32(0x657C, 0x84A08680);
+ WREG32(0x6578, 0x202);
+ WREG32(0x657C, 0xBFF080F8);
+ WREG32(0x6578, 0x300);
+ WREG32(0x657C, 0x83588058);
+ WREG32(0x6578, 0x301);
+ WREG32(0x657C, 0x84E08660);
+ WREG32(0x6578, 0x302);
+ WREG32(0x657C, 0xBFF88120);
+ WREG32(0x6578, 0x400);
+ WREG32(0x657C, 0x83188040);
+ WREG32(0x6578, 0x401);
+ WREG32(0x657C, 0x85008660);
+ WREG32(0x6578, 0x402);
+ WREG32(0x657C, 0xBFF88150);
+ WREG32(0x6578, 0x500);
+ WREG32(0x657C, 0x82D88030);
+ WREG32(0x6578, 0x501);
+ WREG32(0x657C, 0x85408640);
+ WREG32(0x6578, 0x502);
+ WREG32(0x657C, 0xBFF88180);
+ WREG32(0x6578, 0x600);
+ WREG32(0x657C, 0x82A08018);
+ WREG32(0x6578, 0x601);
+ WREG32(0x657C, 0x85808620);
+ WREG32(0x6578, 0x602);
+ WREG32(0x657C, 0xBFF081B8);
+ WREG32(0x6578, 0x700);
+ WREG32(0x657C, 0x82608010);
+ WREG32(0x6578, 0x701);
+ WREG32(0x657C, 0x85A08600);
+ WREG32(0x6578, 0x702);
+ WREG32(0x657C, 0x800081F0);
+ WREG32(0x6578, 0x800);
+ WREG32(0x657C, 0x8228BFF8);
+ WREG32(0x6578, 0x801);
+ WREG32(0x657C, 0x85E085E0);
+ WREG32(0x6578, 0x802);
+ WREG32(0x657C, 0xBFF88228);
+ WREG32(0x6578, 0x10000);
+ WREG32(0x657C, 0x82A8BF00);
+ WREG32(0x6578, 0x10001);
+ WREG32(0x657C, 0x82A08CC0);
+ WREG32(0x6578, 0x10002);
+ WREG32(0x657C, 0x8008BEF8);
+ WREG32(0x6578, 0x10100);
+ WREG32(0x657C, 0x81F0BF28);
+ WREG32(0x6578, 0x10101);
+ WREG32(0x657C, 0x83608CA0);
+ WREG32(0x6578, 0x10102);
+ WREG32(0x657C, 0x8018BED0);
+ WREG32(0x6578, 0x10200);
+ WREG32(0x657C, 0x8148BF38);
+ WREG32(0x6578, 0x10201);
+ WREG32(0x657C, 0x84408C80);
+ WREG32(0x6578, 0x10202);
+ WREG32(0x657C, 0x8008BEB8);
+ WREG32(0x6578, 0x10300);
+ WREG32(0x657C, 0x80B0BF78);
+ WREG32(0x6578, 0x10301);
+ WREG32(0x657C, 0x85008C20);
+ WREG32(0x6578, 0x10302);
+ WREG32(0x657C, 0x8020BEA0);
+ WREG32(0x6578, 0x10400);
+ WREG32(0x657C, 0x8028BF90);
+ WREG32(0x6578, 0x10401);
+ WREG32(0x657C, 0x85E08BC0);
+ WREG32(0x6578, 0x10402);
+ WREG32(0x657C, 0x8018BE90);
+ WREG32(0x6578, 0x10500);
+ WREG32(0x657C, 0xBFB8BFB0);
+ WREG32(0x6578, 0x10501);
+ WREG32(0x657C, 0x86C08B40);
+ WREG32(0x6578, 0x10502);
+ WREG32(0x657C, 0x8010BE90);
+ WREG32(0x6578, 0x10600);
+ WREG32(0x657C, 0xBF58BFC8);
+ WREG32(0x6578, 0x10601);
+ WREG32(0x657C, 0x87A08AA0);
+ WREG32(0x6578, 0x10602);
+ WREG32(0x657C, 0x8010BE98);
+ WREG32(0x6578, 0x10700);
+ WREG32(0x657C, 0xBF10BFF0);
+ WREG32(0x6578, 0x10701);
+ WREG32(0x657C, 0x886089E0);
+ WREG32(0x6578, 0x10702);
+ WREG32(0x657C, 0x8018BEB0);
+ WREG32(0x6578, 0x10800);
+ WREG32(0x657C, 0xBED8BFE8);
+ WREG32(0x6578, 0x10801);
+ WREG32(0x657C, 0x89408940);
+ WREG32(0x6578, 0x10802);
+ WREG32(0x657C, 0xBFE8BED8);
+ WREG32(0x6578, 0x20000);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20001);
+ WREG32(0x657C, 0x90008000);
+ WREG32(0x6578, 0x20002);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20003);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20100);
+ WREG32(0x657C, 0x80108000);
+ WREG32(0x6578, 0x20101);
+ WREG32(0x657C, 0x8FE0BF70);
+ WREG32(0x6578, 0x20102);
+ WREG32(0x657C, 0xBFE880C0);
+ WREG32(0x6578, 0x20103);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20200);
+ WREG32(0x657C, 0x8018BFF8);
+ WREG32(0x6578, 0x20201);
+ WREG32(0x657C, 0x8F80BF08);
+ WREG32(0x6578, 0x20202);
+ WREG32(0x657C, 0xBFD081A0);
+ WREG32(0x6578, 0x20203);
+ WREG32(0x657C, 0xBFF88000);
+ WREG32(0x6578, 0x20300);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20301);
+ WREG32(0x657C, 0x8EE0BEC0);
+ WREG32(0x6578, 0x20302);
+ WREG32(0x657C, 0xBFB082A0);
+ WREG32(0x6578, 0x20303);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20400);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20401);
+ WREG32(0x657C, 0x8E00BEA0);
+ WREG32(0x6578, 0x20402);
+ WREG32(0x657C, 0xBF8883C0);
+ WREG32(0x6578, 0x20403);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x20500);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20501);
+ WREG32(0x657C, 0x8D00BE90);
+ WREG32(0x6578, 0x20502);
+ WREG32(0x657C, 0xBF588500);
+ WREG32(0x6578, 0x20503);
+ WREG32(0x657C, 0x80008008);
+ WREG32(0x6578, 0x20600);
+ WREG32(0x657C, 0x80188000);
+ WREG32(0x6578, 0x20601);
+ WREG32(0x657C, 0x8BC0BE98);
+ WREG32(0x6578, 0x20602);
+ WREG32(0x657C, 0xBF308660);
+ WREG32(0x6578, 0x20603);
+ WREG32(0x657C, 0x80008008);
+ WREG32(0x6578, 0x20700);
+ WREG32(0x657C, 0x80108000);
+ WREG32(0x6578, 0x20701);
+ WREG32(0x657C, 0x8A80BEB0);
+ WREG32(0x6578, 0x20702);
+ WREG32(0x657C, 0xBF0087C0);
+ WREG32(0x6578, 0x20703);
+ WREG32(0x657C, 0x80008008);
+ WREG32(0x6578, 0x20800);
+ WREG32(0x657C, 0x80108000);
+ WREG32(0x6578, 0x20801);
+ WREG32(0x657C, 0x8920BED0);
+ WREG32(0x6578, 0x20802);
+ WREG32(0x657C, 0xBED08920);
+ WREG32(0x6578, 0x20803);
+ WREG32(0x657C, 0x80008010);
+ WREG32(0x6578, 0x30000);
+ WREG32(0x657C, 0x90008000);
+ WREG32(0x6578, 0x30001);
+ WREG32(0x657C, 0x80008000);
+ WREG32(0x6578, 0x30100);
+ WREG32(0x657C, 0x8FE0BF90);
+ WREG32(0x6578, 0x30101);
+ WREG32(0x657C, 0xBFF880A0);
+ WREG32(0x6578, 0x30200);
+ WREG32(0x657C, 0x8F60BF40);
+ WREG32(0x6578, 0x30201);
+ WREG32(0x657C, 0xBFE88180);
+ WREG32(0x6578, 0x30300);
+ WREG32(0x657C, 0x8EC0BF00);
+ WREG32(0x6578, 0x30301);
+ WREG32(0x657C, 0xBFC88280);
+ WREG32(0x6578, 0x30400);
+ WREG32(0x657C, 0x8DE0BEE0);
+ WREG32(0x6578, 0x30401);
+ WREG32(0x657C, 0xBFA083A0);
+ WREG32(0x6578, 0x30500);
+ WREG32(0x657C, 0x8CE0BED0);
+ WREG32(0x6578, 0x30501);
+ WREG32(0x657C, 0xBF7884E0);
+ WREG32(0x6578, 0x30600);
+ WREG32(0x657C, 0x8BA0BED8);
+ WREG32(0x6578, 0x30601);
+ WREG32(0x657C, 0xBF508640);
+ WREG32(0x6578, 0x30700);
+ WREG32(0x657C, 0x8A60BEE8);
+ WREG32(0x6578, 0x30701);
+ WREG32(0x657C, 0xBF2087A0);
+ WREG32(0x6578, 0x30800);
+ WREG32(0x657C, 0x8900BF00);
+ WREG32(0x6578, 0x30801);
+ WREG32(0x657C, 0xBF008900);
+}
+
+struct rv515_watermark {
+ u32 lb_request_fifo_depth;
+ fixed20_12 num_line_pair;
+ fixed20_12 estimated_width;
+ fixed20_12 worst_case_latency;
+ fixed20_12 consumption_rate;
+ fixed20_12 active_time;
+ fixed20_12 dbpp;
+ fixed20_12 priority_mark_max;
+ fixed20_12 priority_mark;
+ fixed20_12 sclk;
+};
+
+void rv515_crtc_bandwidth_compute(struct radeon_device *rdev,
+ struct radeon_crtc *crtc,
+ struct rv515_watermark *wm)
+{
+ struct drm_display_mode *mode = &crtc->base.mode;
+ fixed20_12 a, b, c;
+ fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+ fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+
+ if (!crtc->base.enabled) {
+ /* FIXME: wouldn't it better to set priority mark to maximum */
+ wm->lb_request_fifo_depth = 4;
+ return;
+ }
+
+ if (crtc->vsc.full > rfixed_const(2))
+ wm->num_line_pair.full = rfixed_const(2);
+ else
+ wm->num_line_pair.full = rfixed_const(1);
+
+ b.full = rfixed_const(mode->crtc_hdisplay);
+ c.full = rfixed_const(256);
+ a.full = rfixed_mul(wm->num_line_pair, b);
+ request_fifo_depth.full = rfixed_div(a, c);
+ if (a.full < rfixed_const(4)) {
+ wm->lb_request_fifo_depth = 4;
+ } else {
+ wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+ }
+
+ /* Determine consumption rate
+ * pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+ * vtaps = number of vertical taps,
+ * vsc = vertical scaling ratio, defined as source/destination
+ * hsc = horizontal scaling ration, defined as source/destination
+ */
+ a.full = rfixed_const(mode->clock);
+ b.full = rfixed_const(1000);
+ a.full = rfixed_div(a, b);
+ pclk.full = rfixed_div(b, a);
+ if (crtc->rmx_type != RMX_OFF) {
+ b.full = rfixed_const(2);
+ if (crtc->vsc.full > b.full)
+ b.full = crtc->vsc.full;
+ b.full = rfixed_mul(b, crtc->hsc);
+ c.full = rfixed_const(2);
+ b.full = rfixed_div(b, c);
+ consumption_time.full = rfixed_div(pclk, b);
+ } else {
+ consumption_time.full = pclk.full;
+ }
+ a.full = rfixed_const(1);
+ wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+ /* Determine line time
+ * LineTime = total time for one line of displayhtotal
+ * LineTime = total number of horizontal pixels
+ * pclk = pixel clock period(ns)
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ line_time.full = rfixed_mul(a, pclk);
+
+ /* Determine active time
+ * ActiveTime = time of active region of display within one line,
+ * hactive = total number of horizontal active pixels
+ * htotal = total number of horizontal pixels
+ */
+ a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+ b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->active_time.full = rfixed_mul(line_time, b);
+ wm->active_time.full = rfixed_div(wm->active_time, a);
+
+ /* Determine chunk time
+ * ChunkTime = the time it takes the DCP to send one chunk of data
+ * to the LB which consists of pipeline delay and inter chunk gap
+ * sclk = system clock(Mhz)
+ */
+ a.full = rfixed_const(600 * 1000);
+ chunk_time.full = rfixed_div(a, rdev->pm.sclk);
+ read_delay_latency.full = rfixed_const(1000);
+
+ /* Determine the worst case latency
+ * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+ * WorstCaseLatency = worst case time from urgent to when the MC starts
+ * to return data
+ * READ_DELAY_IDLE_MAX = constant of 1us
+ * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+ * which consists of pipeline delay and inter chunk gap
+ */
+ if (rfixed_trunc(wm->num_line_pair) > 1) {
+ a.full = rfixed_const(3);
+ wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+ wm->worst_case_latency.full += read_delay_latency.full;
+ } else {
+ wm->worst_case_latency.full = chunk_time.full + read_delay_latency.full;
+ }
+
+ /* Determine the tolerable latency
+ * TolerableLatency = Any given request has only 1 line time
+ * for the data to be returned
+ * LBRequestFifoDepth = Number of chunk requests the LB can
+ * put into the request FIFO for a display
+ * LineTime = total time for one line of display
+ * ChunkTime = the time it takes the DCP to send one chunk
+ * of data to the LB which consists of
+ * pipeline delay and inter chunk gap
+ */
+ if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+ tolerable_latency.full = line_time.full;
+ } else {
+ tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+ tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+ tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+ tolerable_latency.full = line_time.full - tolerable_latency.full;
+ }
+ /* We assume worst case 32bits (4 bytes) */
+ wm->dbpp.full = rfixed_const(2 * 16);
+
+ /* Determine the maximum priority mark
+ * width = viewport width in pixels
+ */
+ a.full = rfixed_const(16);
+ wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+ wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+ /* Determine estimated width */
+ estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+ estimated_width.full = rfixed_div(estimated_width, consumption_time);
+ if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+ wm->priority_mark.full = rfixed_const(10);
+ } else {
+ a.full = rfixed_const(16);
+ wm->priority_mark.full = rfixed_div(estimated_width, a);
+ wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+ }
+}
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
+{
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+ struct rv515_watermark wm0;
+ struct rv515_watermark wm1;
+ u32 tmp;
+ fixed20_12 priority_mark02, priority_mark12, fill_rate;
+ fixed20_12 a, b;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+ rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+ rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+ rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+ tmp = wm0.lb_request_fifo_depth;
+ tmp |= wm1.lb_request_fifo_depth << 16;
+ WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+ if (mode0 && mode1) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ b.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+ else
+ b.full = wm1.num_line_pair.full;
+ a.full += b.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ priority_mark02.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ priority_mark12.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ } else if (mode0) {
+ if (rfixed_trunc(wm0.dbpp) > 64)
+ a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+ else
+ a.full = wm0.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm0.sclk, a);
+ if (wm0.consumption_rate.full > fill_rate.full) {
+ b.full = wm0.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm0.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ priority_mark02.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm0.worst_case_latency,
+ wm0.consumption_rate);
+ b.full = rfixed_const(16);
+ priority_mark02.full = rfixed_div(a, b);
+ }
+ if (wm0.priority_mark.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark.full;
+ if (rfixed_trunc(priority_mark02) < 0)
+ priority_mark02.full = 0;
+ if (wm0.priority_mark_max.full > priority_mark02.full)
+ priority_mark02.full = wm0.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ } else {
+ if (rfixed_trunc(wm1.dbpp) > 64)
+ a.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+ else
+ a.full = wm1.num_line_pair.full;
+ fill_rate.full = rfixed_div(wm1.sclk, a);
+ if (wm1.consumption_rate.full > fill_rate.full) {
+ b.full = wm1.consumption_rate.full - fill_rate.full;
+ b.full = rfixed_mul(b, wm1.active_time);
+ a.full = rfixed_const(16);
+ b.full = rfixed_div(b, a);
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ priority_mark12.full = a.full + b.full;
+ } else {
+ a.full = rfixed_mul(wm1.worst_case_latency,
+ wm1.consumption_rate);
+ b.full = rfixed_const(16 * 1000);
+ priority_mark12.full = rfixed_div(a, b);
+ }
+ if (wm1.priority_mark.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark.full;
+ if (rfixed_trunc(priority_mark12) < 0)
+ priority_mark12.full = 0;
+ if (wm1.priority_mark_max.full > priority_mark12.full)
+ priority_mark12.full = wm1.priority_mark_max.full;
+ WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+ WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ }
+}
+
+void rv515_bandwidth_update(struct radeon_device *rdev)
+{
+ uint32_t tmp;
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+ /*
+ * Set display0/1 priority up in the memory controller for
+ * modes if the user specifies HIGH for displaypriority
+ * option.
+ */
+ if (rdev->disp_priority == 2) {
+ tmp = RREG32_MC(MC_MISC_LAT_TIMER);
+ tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+ tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+ if (mode1)
+ tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+ if (mode0)
+ tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+ WREG32_MC(MC_MISC_LAT_TIMER, tmp);
+ }
+ rv515_bandwidth_avivo_update(rdev);
+}
diff --git a/drivers/gpu/drm/radeon/rv515r.h b/drivers/gpu/drm/radeon/rv515r.h
new file mode 100644
index 0000000..f3cf840
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv515r.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef RV515R_H
+#define RV515R_H
+
+/* RV515 registers */
+#define PCIE_INDEX 0x0030
+#define PCIE_DATA 0x0034
+#define MC_IND_INDEX 0x0070
+#define MC_IND_WR_EN (1 << 24)
+#define MC_IND_DATA 0x0074
+#define RBBM_SOFT_RESET 0x00F0
+#define CONFIG_MEMSIZE 0x00F8
+#define HDP_FB_LOCATION 0x0134
+#define CP_CSQ_CNTL 0x0740
+#define CP_CSQ_MODE 0x0744
+#define CP_CSQ_ADDR 0x07F0
+#define CP_CSQ_DATA 0x07F4
+#define CP_CSQ_STAT 0x07F8
+#define CP_CSQ2_STAT 0x07FC
+#define RBBM_STATUS 0x0E40
+#define DST_PIPE_CONFIG 0x170C
+#define WAIT_UNTIL 0x1720
+#define WAIT_2D_IDLE (1 << 14)
+#define WAIT_3D_IDLE (1 << 15)
+#define WAIT_2D_IDLECLEAN (1 << 16)
+#define WAIT_3D_IDLECLEAN (1 << 17)
+#define ISYNC_CNTL 0x1724
+#define ISYNC_ANY2D_IDLE3D (1 << 0)
+#define ISYNC_ANY3D_IDLE2D (1 << 1)
+#define ISYNC_TRIG2D_IDLE3D (1 << 2)
+#define ISYNC_TRIG3D_IDLE2D (1 << 3)
+#define ISYNC_WAIT_IDLEGUI (1 << 4)
+#define ISYNC_CPSCRATCH_IDLEGUI (1 << 5)
+#define VAP_INDEX_OFFSET 0x208C
+#define VAP_PVS_STATE_FLUSH_REG 0x2284
+#define GB_ENABLE 0x4008
+#define GB_MSPOS0 0x4010
+#define MS_X0_SHIFT 0
+#define MS_Y0_SHIFT 4
+#define MS_X1_SHIFT 8
+#define MS_Y1_SHIFT 12
+#define MS_X2_SHIFT 16
+#define MS_Y2_SHIFT 20
+#define MSBD0_Y_SHIFT 24
+#define MSBD0_X_SHIFT 28
+#define GB_MSPOS1 0x4014
+#define MS_X3_SHIFT 0
+#define MS_Y3_SHIFT 4
+#define MS_X4_SHIFT 8
+#define MS_Y4_SHIFT 12
+#define MS_X5_SHIFT 16
+#define MS_Y5_SHIFT 20
+#define MSBD1_SHIFT 24
+#define GB_TILE_CONFIG 0x4018
+#define ENABLE_TILING (1 << 0)
+#define PIPE_COUNT_MASK 0x0000000E
+#define PIPE_COUNT_SHIFT 1
+#define TILE_SIZE_8 (0 << 4)
+#define TILE_SIZE_16 (1 << 4)
+#define TILE_SIZE_32 (2 << 4)
+#define SUBPIXEL_1_12 (0 << 16)
+#define SUBPIXEL_1_16 (1 << 16)
+#define GB_SELECT 0x401C
+#define GB_AA_CONFIG 0x4020
+#define GB_PIPE_SELECT 0x402C
+#define GA_ENHANCE 0x4274
+#define GA_DEADLOCK_CNTL (1 << 0)
+#define GA_FASTSYNC_CNTL (1 << 1)
+#define GA_POLY_MODE 0x4288
+#define FRONT_PTYPE_POINT (0 << 4)
+#define FRONT_PTYPE_LINE (1 << 4)
+#define FRONT_PTYPE_TRIANGE (2 << 4)
+#define BACK_PTYPE_POINT (0 << 7)
+#define BACK_PTYPE_LINE (1 << 7)
+#define BACK_PTYPE_TRIANGE (2 << 7)
+#define GA_ROUND_MODE 0x428C
+#define GEOMETRY_ROUND_TRUNC (0 << 0)
+#define GEOMETRY_ROUND_NEAREST (1 << 0)
+#define COLOR_ROUND_TRUNC (0 << 2)
+#define COLOR_ROUND_NEAREST (1 << 2)
+#define SU_REG_DEST 0x42C8
+#define RB3D_DSTCACHE_CTLSTAT 0x4E4C
+#define RB3D_DC_FLUSH (2 << 0)
+#define RB3D_DC_FREE (2 << 2)
+#define RB3D_DC_FINISH (1 << 4)
+#define ZB_ZCACHE_CTLSTAT 0x4F18
+#define ZC_FLUSH (1 << 0)
+#define ZC_FREE (1 << 1)
+#define DC_LB_MEMORY_SPLIT 0x6520
+#define DC_LB_MEMORY_SPLIT_MASK 0x00000003
+#define DC_LB_MEMORY_SPLIT_SHIFT 0
+#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0
+#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1
+#define DC_LB_MEMORY_SPLIT_D1_ONLY 2
+#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3
+#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2)
+#define DC_LB_DISP1_END_ADR_SHIFT 4
+#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0
+#define D1MODE_PRIORITY_A_CNT 0x6548
+#define MODE_PRIORITY_MARK_MASK 0x00007FFF
+#define MODE_PRIORITY_OFF (1 << 16)
+#define MODE_PRIORITY_ALWAYS_ON (1 << 20)
+#define MODE_PRIORITY_FORCE_MASK (1 << 24)
+#define D1MODE_PRIORITY_B_CNT 0x654C
+#define LB_MAX_REQ_OUTSTANDING 0x6D58
+#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F
+#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0
+#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000
+#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16
+#define D2MODE_PRIORITY_A_CNT 0x6D48
+#define D2MODE_PRIORITY_B_CNT 0x6D4C
+
+/* ix[MC] registers */
+#define MC_FB_LOCATION 0x01
+#define MC_FB_START_MASK 0x0000FFFF
+#define MC_FB_START_SHIFT 0
+#define MC_FB_TOP_MASK 0xFFFF0000
+#define MC_FB_TOP_SHIFT 16
+#define MC_AGP_LOCATION 0x02
+#define MC_AGP_START_MASK 0x0000FFFF
+#define MC_AGP_START_SHIFT 0
+#define MC_AGP_TOP_MASK 0xFFFF0000
+#define MC_AGP_TOP_SHIFT 16
+#define MC_AGP_BASE 0x03
+#define MC_AGP_BASE_2 0x04
+#define MC_CNTL 0x5
+#define MEM_NUM_CHANNELS_MASK 0x00000003
+#define MC_STATUS 0x08
+#define MC_STATUS_IDLE (1 << 4)
+#define MC_MISC_LAT_TIMER 0x09
+#define MC_CPR_INIT_LAT_MASK 0x0000000F
+#define MC_VF_INIT_LAT_MASK 0x000000F0
+#define MC_DISP0R_INIT_LAT_MASK 0x00000F00
+#define MC_DISP0R_INIT_LAT_SHIFT 8
+#define MC_DISP1R_INIT_LAT_MASK 0x0000F000
+#define MC_DISP1R_INIT_LAT_SHIFT 12
+#define MC_FIXED_INIT_LAT_MASK 0x000F0000
+#define MC_E2R_INIT_LAT_MASK 0x00F00000
+#define SAME_PAGE_PRIO_MASK 0x0F000000
+#define MC_GLOBW_INIT_LAT_MASK 0xF0000000
+
+
+#endif
+
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index da50cc5..21d8ffd 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -67,7 +67,7 @@
"programming pipes. Bad things might happen.\n");
}
- tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24);
tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24);
WREG32(R700_MC_VM_FB_LOCATION, tmp);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c1c407f..c2b0d71 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -43,7 +43,6 @@
#define TTM_BO_HASH_ORDER 13
static int ttm_bo_setup_vm(struct ttm_buffer_object *bo);
-static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
static int ttm_bo_swapout(struct ttm_mem_shrink *shrink);
static inline uint32_t ttm_bo_type_flags(unsigned type)
@@ -224,6 +223,9 @@
TTM_ASSERT_LOCKED(&bo->mutex);
bo->ttm = NULL;
+ if (bdev->need_dma32)
+ page_flags |= TTM_PAGE_FLAG_DMA32;
+
switch (bo->type) {
case ttm_bo_type_device:
if (zero_alloc)
@@ -304,6 +306,9 @@
}
+ if (bdev->driver->move_notify)
+ bdev->driver->move_notify(bo, mem);
+
if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED))
ret = ttm_bo_move_ttm(bo, evict, no_wait, mem);
@@ -655,31 +660,52 @@
return 0;
}
+static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
+ uint32_t cur_placement,
+ uint32_t proposed_placement)
+{
+ uint32_t caching = proposed_placement & TTM_PL_MASK_CACHING;
+ uint32_t result = proposed_placement & ~TTM_PL_MASK_CACHING;
+
+ /**
+ * Keep current caching if possible.
+ */
+
+ if ((cur_placement & caching) != 0)
+ result |= (cur_placement & caching);
+ else if ((man->default_caching & caching) != 0)
+ result |= man->default_caching;
+ else if ((TTM_PL_FLAG_CACHED & caching) != 0)
+ result |= TTM_PL_FLAG_CACHED;
+ else if ((TTM_PL_FLAG_WC & caching) != 0)
+ result |= TTM_PL_FLAG_WC;
+ else if ((TTM_PL_FLAG_UNCACHED & caching) != 0)
+ result |= TTM_PL_FLAG_UNCACHED;
+
+ return result;
+}
+
+
static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man,
bool disallow_fixed,
uint32_t mem_type,
- uint32_t mask, uint32_t *res_mask)
+ uint32_t proposed_placement,
+ uint32_t *masked_placement)
{
uint32_t cur_flags = ttm_bo_type_flags(mem_type);
if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed)
return false;
- if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0)
+ if ((cur_flags & proposed_placement & TTM_PL_MASK_MEM) == 0)
return false;
- if ((mask & man->available_caching) == 0)
+ if ((proposed_placement & man->available_caching) == 0)
return false;
- if (mask & man->default_caching)
- cur_flags |= man->default_caching;
- else if (mask & TTM_PL_FLAG_CACHED)
- cur_flags |= TTM_PL_FLAG_CACHED;
- else if (mask & TTM_PL_FLAG_WC)
- cur_flags |= TTM_PL_FLAG_WC;
- else
- cur_flags |= TTM_PL_FLAG_UNCACHED;
- *res_mask = cur_flags;
+ cur_flags |= (proposed_placement & man->available_caching);
+
+ *masked_placement = cur_flags;
return true;
}
@@ -723,6 +749,9 @@
if (!type_ok)
continue;
+ cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+ cur_flags);
+
if (mem_type == TTM_PL_SYSTEM)
break;
@@ -779,6 +808,9 @@
proposed_placement, &cur_flags))
continue;
+ cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+ cur_flags);
+
ret = ttm_bo_mem_force_space(bdev, mem, mem_type,
interruptible, no_wait);
@@ -1150,13 +1182,14 @@
int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type)
{
- struct ttm_mem_type_manager *man = &bdev->man[mem_type];
+ struct ttm_mem_type_manager *man;
int ret = -EINVAL;
if (mem_type >= TTM_NUM_MEM_TYPES) {
printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", mem_type);
return ret;
}
+ man = &bdev->man[mem_type];
if (!man->has_type) {
printk(KERN_ERR TTM_PFX "Trying to take down uninitialized "
@@ -1305,7 +1338,8 @@
int ttm_bo_device_init(struct ttm_bo_device *bdev,
struct ttm_mem_global *mem_glob,
- struct ttm_bo_driver *driver, uint64_t file_page_offset)
+ struct ttm_bo_driver *driver, uint64_t file_page_offset,
+ bool need_dma32)
{
int ret = -EINVAL;
@@ -1342,6 +1376,7 @@
INIT_LIST_HEAD(&bdev->ddestroy);
INIT_LIST_HEAD(&bdev->swap_lru);
bdev->dev_mapping = NULL;
+ bdev->need_dma32 = need_dma32;
ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout);
ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink);
if (unlikely(ret != 0)) {
@@ -1419,6 +1454,7 @@
unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1);
}
+EXPORT_SYMBOL(ttm_bo_unmap_virtual);
static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo)
{
@@ -1540,6 +1576,10 @@
driver->sync_obj_unref(&sync_obj);
driver->sync_obj_unref(&tmp_obj);
spin_lock(&bo->lock);
+ } else {
+ spin_unlock(&bo->lock);
+ driver->sync_obj_unref(&sync_obj);
+ spin_lock(&bo->lock);
}
}
return 0;
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 517c845..ad4ada0 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -34,7 +34,6 @@
#include <linux/highmem.h>
#include <linux/wait.h>
#include <linux/vmalloc.h>
-#include <linux/version.h>
#include <linux/module.h>
void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
@@ -137,7 +136,8 @@
}
static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
- unsigned long page)
+ unsigned long page,
+ pgprot_t prot)
{
struct page *d = ttm_tt_get_page(ttm, page);
void *dst;
@@ -146,17 +146,35 @@
return -ENOMEM;
src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
- dst = kmap(d);
+
+#ifdef CONFIG_X86
+ dst = kmap_atomic_prot(d, KM_USER0, prot);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ dst = vmap(&d, 1, 0, prot);
+ else
+ dst = kmap(d);
+#endif
if (!dst)
return -ENOMEM;
memcpy_fromio(dst, src, PAGE_SIZE);
- kunmap(d);
+
+#ifdef CONFIG_X86
+ kunmap_atomic(dst, KM_USER0);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ vunmap(dst);
+ else
+ kunmap(d);
+#endif
+
return 0;
}
static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
- unsigned long page)
+ unsigned long page,
+ pgprot_t prot)
{
struct page *s = ttm_tt_get_page(ttm, page);
void *src;
@@ -165,12 +183,28 @@
return -ENOMEM;
dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
- src = kmap(s);
+#ifdef CONFIG_X86
+ src = kmap_atomic_prot(s, KM_USER0, prot);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ src = vmap(&s, 1, 0, prot);
+ else
+ src = kmap(s);
+#endif
if (!src)
return -ENOMEM;
memcpy_toio(dst, src, PAGE_SIZE);
- kunmap(s);
+
+#ifdef CONFIG_X86
+ kunmap_atomic(src, KM_USER0);
+#else
+ if (pgprot_val(prot) != pgprot_val(PAGE_KERNEL))
+ vunmap(src);
+ else
+ kunmap(s);
+#endif
+
return 0;
}
@@ -215,11 +249,17 @@
for (i = 0; i < new_mem->num_pages; ++i) {
page = i * dir + add;
- if (old_iomap == NULL)
- ret = ttm_copy_ttm_io_page(ttm, new_iomap, page);
- else if (new_iomap == NULL)
- ret = ttm_copy_io_ttm_page(ttm, old_iomap, page);
- else
+ if (old_iomap == NULL) {
+ pgprot_t prot = ttm_io_prot(old_mem->placement,
+ PAGE_KERNEL);
+ ret = ttm_copy_ttm_io_page(ttm, new_iomap, page,
+ prot);
+ } else if (new_iomap == NULL) {
+ pgprot_t prot = ttm_io_prot(new_mem->placement,
+ PAGE_KERNEL);
+ ret = ttm_copy_io_ttm_page(ttm, old_iomap, page,
+ prot);
+ } else
ret = ttm_copy_io_page(new_iomap, old_iomap, page);
if (ret)
goto out1;
@@ -510,8 +550,8 @@
if (evict) {
ret = ttm_bo_wait(bo, false, false, false);
spin_unlock(&bo->lock);
- driver->sync_obj_unref(&bo->sync_obj);
-
+ if (tmp_obj)
+ driver->sync_obj_unref(&tmp_obj);
if (ret)
return ret;
@@ -533,6 +573,8 @@
set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
spin_unlock(&bo->lock);
+ if (tmp_obj)
+ driver->sync_obj_unref(&tmp_obj);
ret = ttm_buffer_object_transfer(bo, &ghost_obj);
if (ret)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 27b146c..33de763 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -32,7 +32,6 @@
#include <ttm/ttm_bo_driver.h>
#include <ttm/ttm_placement.h>
#include <linux/mm.h>
-#include <linux/version.h>
#include <linux/rbtree.h>
#include <linux/module.h>
#include <linux/uaccess.h>
@@ -102,6 +101,9 @@
return VM_FAULT_NOPAGE;
}
+ if (bdev->driver->fault_reserve_notify)
+ bdev->driver->fault_reserve_notify(bo);
+
/*
* Wait for buffer data in transit, due to a pipelined
* move.
@@ -328,7 +330,7 @@
goto out_unref;
kmap_offset = dev_offset - bo->vm_node->start;
- if (unlikely(kmap_offset) >= bo->num_pages) {
+ if (unlikely(kmap_offset >= bo->num_pages)) {
ret = -EFBIG;
goto out_unref;
}
@@ -402,7 +404,7 @@
bool dummy;
kmap_offset = (*f_pos >> PAGE_SHIFT);
- if (unlikely(kmap_offset) >= bo->num_pages)
+ if (unlikely(kmap_offset >= bo->num_pages))
return -EFBIG;
page_offset = *f_pos & ~PAGE_MASK;
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 0331fa7..b8b6c4a 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -28,7 +28,6 @@
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-#include <linux/version.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/highmem.h>
@@ -87,10 +86,16 @@
unsigned long i;
for (i = 0; i < num_pages; ++i) {
- if (pages[i]) {
- unsigned long start = (unsigned long)page_address(pages[i]);
- flush_dcache_range(start, start + PAGE_SIZE);
- }
+ struct page *page = pages[i];
+ void *page_virtual;
+
+ if (unlikely(page == NULL))
+ continue;
+
+ page_virtual = kmap_atomic(page, KM_USER0);
+ flush_dcache_range((unsigned long) page_virtual,
+ (unsigned long) page_virtual + PAGE_SIZE);
+ kunmap_atomic(page_virtual, KM_USER0);
}
#else
if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
@@ -132,10 +137,17 @@
static struct page *ttm_tt_alloc_page(unsigned page_flags)
{
- if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
- return alloc_page(GFP_HIGHUSER | __GFP_ZERO);
+ gfp_t gfp_flags = GFP_USER;
- return alloc_page(GFP_HIGHUSER);
+ if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
+ gfp_flags |= __GFP_ZERO;
+
+ if (page_flags & TTM_PAGE_FLAG_DMA32)
+ gfp_flags |= __GFP_DMA32;
+ else
+ gfp_flags |= __GFP_HIGHMEM;
+
+ return alloc_page(gfp_flags);
}
static void ttm_tt_free_user_pages(struct ttm_tt *ttm)
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index c248c1d..5935b88 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -183,7 +183,7 @@
}
status = VIA_READ(VIA_REG_INTERRUPT);
- VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE);
+ VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE);
VIA_WRITE8(0x83d4, 0x11);
VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
@@ -194,6 +194,10 @@
void via_disable_vblank(struct drm_device *dev, int crtc)
{
drm_via_private_t *dev_priv = dev->dev_private;
+ u32 status;
+
+ status = VIA_READ(VIA_REG_INTERRUPT);
+ VIA_WRITE(VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE);
VIA_WRITE8(0x83d4, 0x11);
VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index f2c21d5..5eb10c2 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1075,14 +1075,16 @@
*/
int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int interrupt)
{
- struct hid_report_enum *report_enum = hid->report_enum + type;
- struct hid_driver *hdrv = hid->driver;
+ struct hid_report_enum *report_enum;
+ struct hid_driver *hdrv;
struct hid_report *report;
unsigned int i;
int ret;
if (!hid || !hid->driver)
return -ENODEV;
+ report_enum = hid->report_enum + type;
+ hdrv = hid->driver;
if (!size) {
dbg_hid("empty report\n");
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 76c4bbe..3c1fcb7 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -22,7 +22,6 @@
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/mutex.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 9e94215..215b2ad 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -527,8 +527,10 @@
goto goodreturn;
case HIDIOCGCOLLECTIONINDEX:
+ i = field->usage[uref->usage_index].collection_index;
+ unlock_kernel();
kfree(uref_multi);
- return field->usage[uref->usage_index].collection_index;
+ return i;
case HIDIOCGUSAGES:
for (i = 0; i < uref_multi->num_values; i++)
uref_multi->values[i] =
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ad2b343..7d3f15d 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -357,7 +357,7 @@
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
+ { 0x0014, "AB9", /* + AB9 Pro */ {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -455,7 +455,7 @@
{ "AUX3 FAN", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0018, NULL /* Unknown, need DMI string */, {
+ { 0x0018, "AB9 QuadGT", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
@@ -564,7 +564,7 @@
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001C, NULL /* Unknown, need DMI string */, {
+ { 0x001C, "IX38 QuadGT", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index bff0103..fe4fa29 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -593,7 +593,11 @@
sensor->data = data;
sensor->id = flags->integer.value;
sensor->limit1 = limit1->integer.value;
- sensor->limit2 = limit2->integer.value;
+ if (data->old_interface)
+ sensor->limit2 = limit2->integer.value;
+ else
+ /* The upper limit is expressed as delta from lower limit */
+ sensor->limit2 = sensor->limit1 + limit2->integer.value;
snprintf(sensor->input_attr_name, ATTR_NAME_SIZE,
"%s%d_input", base_name, start + *num);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 86142a8..58f66be 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -418,6 +418,7 @@
data->count = 3;
break;
default:
+ mutex_unlock(&data->update_lock);
dev_err(&client->dev,
"illegal value for fan divider (%d)\n", div);
return -EINVAL;
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 56cd600..6290a25 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -257,7 +257,7 @@
(data->flag == SHT15_READING_NOTHING),
msecs_to_jiffies(timeout_msecs));
if (ret == 0) {/* timeout occurred */
- disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
sht15_connection_reset(data);
return -ETIME;
}
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index a92dbb9..ba75bfc 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -86,6 +86,7 @@
#define SUPERIO_REG_ACT 0x30
#define SUPERIO_REG_BASE 0x60
#define SUPERIO_REG_DEVID 0x20
+#define SUPERIO_REG_DEVREV 0x21
/* Logical device registers */
@@ -429,6 +430,9 @@
* The LPC47M292 (device id 0x6B) is somewhat compatible, but it
* supports a 3rd fan, and the pin configuration registers are
* unfortunately different.
+ * The LPC47M233 has the same device id (0x6B) but is not compatible.
+ * We check the high bit of the device revision register to
+ * differentiate them.
*/
switch (val) {
case 0x51:
@@ -448,6 +452,13 @@
sio_data->type = smsc47m1;
break;
case 0x6B:
+ if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
+ pr_debug(DRVNAME ": "
+ "Found SMSC LPC47M233, unsupported\n");
+ superio_exit();
+ return -ENODEV;
+ }
+
pr_info(DRVNAME ": Found SMSC LPC47M292\n");
sio_data->type = smsc47m2;
break;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index aa87b6a..8206442 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -328,6 +328,7 @@
config I2C_DESIGNWARE
tristate "Synopsys DesignWare"
+ depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 3fae3a9..c89687a 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -187,6 +187,11 @@
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
+ /* Respond at reserved "SMBus Host" slave address" (and zero);
+ * we seem to have no option to not respond...
+ */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
+
dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
dev_dbg(dev->dev, "PSC = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
@@ -387,7 +392,7 @@
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
if (!dev->terminate)
- dev_err(dev->dev, "TDR IRQ while no data to send\n");
+ dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
}
/*
@@ -473,9 +478,14 @@
break;
case DAVINCI_I2C_IVR_AAS:
- dev_warn(dev->dev, "Address as slave interrupt\n");
- }/* switch */
- }/* while */
+ dev_dbg(dev->dev, "Address as slave interrupt\n");
+ break;
+
+ default:
+ dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
+ break;
+ }
+ }
return count ? IRQ_HANDLED : IRQ_NONE;
}
@@ -505,7 +515,7 @@
return -ENODEV;
}
- ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+ ioarea = request_mem_region(mem->start, resource_size(mem),
pdev->name);
if (!ioarea) {
dev_err(&pdev->dev, "I2C region already claimed\n");
@@ -523,7 +533,7 @@
dev->irq = irq->start;
platform_set_drvdata(pdev, dev);
- dev->clk = clk_get(&pdev->dev, "I2CCLK");
+ dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
r = -ENODEV;
goto err_free_mem;
@@ -568,7 +578,7 @@
put_device(&pdev->dev);
kfree(dev);
err_release_region:
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return r;
}
@@ -591,7 +601,7 @@
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return 0;
}
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e447674..b1bc6e2 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -85,10 +85,11 @@
{
volatile struct iic_regs __iomem *iic = dev->vaddr;
printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
- printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n"
- KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n"
- KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
- KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
+ printk(KERN_DEBUG
+ " cntl = 0x%02x, mdcntl = 0x%02x\n"
+ " sts = 0x%02x, extsts = 0x%02x\n"
+ " clkdiv = 0x%02x, xfrcnt = 0x%02x\n"
+ " xtcntlss = 0x%02x, directcntl = 0x%02x\n",
in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts),
in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt),
in_8(&iic->xtcntlss), in_8(&iic->directcntl));
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ad8d201..d258b02 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -672,9 +672,10 @@
break;
}
+ err = 0;
+complete:
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
- err = 0;
if (stat & OMAP_I2C_STAT_NACK) {
err |= OMAP_I2C_STAT_NACK;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -685,16 +686,19 @@
err |= OMAP_I2C_STAT_AL;
}
if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
- OMAP_I2C_STAT_AL))
+ OMAP_I2C_STAT_AL)) {
omap_i2c_complete_cmd(dev, err);
+ return IRQ_HANDLED;
+ }
if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
u8 num_bytes = 1;
if (dev->fifo_size) {
if (stat & OMAP_I2C_STAT_RRDY)
num_bytes = dev->fifo_size;
- else
- num_bytes = omap_i2c_read_reg(dev,
- OMAP_I2C_BUFSTAT_REG);
+ else /* read RXSTAT on RDR interrupt */
+ num_bytes = (omap_i2c_read_reg(dev,
+ OMAP_I2C_BUFSTAT_REG)
+ >> 8) & 0x3F;
}
while (num_bytes) {
num_bytes--;
@@ -731,9 +735,10 @@
if (dev->fifo_size) {
if (stat & OMAP_I2C_STAT_XRDY)
num_bytes = dev->fifo_size;
- else
+ else /* read TXSTAT on XDR interrupt */
num_bytes = omap_i2c_read_reg(dev,
- OMAP_I2C_BUFSTAT_REG);
+ OMAP_I2C_BUFSTAT_REG)
+ & 0x3F;
}
while (num_bytes) {
num_bytes--;
@@ -760,6 +765,27 @@
"data to send\n");
break;
}
+
+ /*
+ * OMAP3430 Errata 1.153: When an XRDY/XDR
+ * is hit, wait for XUDF before writing data
+ * to DATA_REG. Otherwise some data bytes can
+ * be lost while transferring them from the
+ * memory to the I2C interface.
+ */
+
+ if (cpu_is_omap34xx()) {
+ while (!(stat & OMAP_I2C_STAT_XUDF)) {
+ if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+ omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+ err |= OMAP_I2C_STAT_XUDF;
+ goto complete;
+ }
+ cpu_relax();
+ stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+ }
+ }
+
omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
}
omap_i2c_ack_stat(dev,
@@ -806,7 +832,7 @@
return -ENODEV;
}
- ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+ ioarea = request_mem_region(mem->start, resource_size(mem),
pdev->name);
if (!ioarea) {
dev_err(&pdev->dev, "I2C region already claimed\n");
@@ -879,7 +905,7 @@
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON;
- strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+ strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
@@ -905,7 +931,7 @@
platform_set_drvdata(pdev, NULL);
kfree(dev);
err_release_region:
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return r;
}
@@ -925,7 +951,7 @@
iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ release_mem_region(mem->start, resource_size(mem));
return 0;
}
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 8f42a45..20bb0ce 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -763,11 +763,6 @@
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
- /* check for s3c2440 i2c controller */
-
- if (s3c24xx_i2c_is2440(i2c))
- writel(0x0, i2c->regs + S3C2440_IICLC);
-
return 0;
}
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 1c01083..820487d 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -563,7 +563,7 @@
goto err_irq;
}
- size = (res->end - res->start) + 1;
+ size = resource_size(res);
pd->reg = ioremap(res->start, size);
if (pd->reg == NULL) {
@@ -637,7 +637,7 @@
platform_driver_unregister(&sh_mobile_i2c_driver);
}
-module_init(sh_mobile_i2c_adap_init);
+subsys_initcall(sh_mobile_i2c_adap_init);
module_exit(sh_mobile_i2c_adap_exit);
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 042fda2..6407f47 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -92,7 +92,7 @@
goto err;
}
- size = (res->end-res->start)+1;
+ size = resource_size(res);
pd->ioarea = request_mem_region(res->start, size, dev->name);
if (pd->ioarea == NULL) {
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index 1a9cc13..b96f302 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -27,7 +27,7 @@
#include <linux/delay.h>
#define TSL2550_DRV_NAME "tsl2550"
-#define DRIVER_VERSION "1.1.1"
+#define DRIVER_VERSION "1.1.2"
/*
* Defines
@@ -189,13 +189,16 @@
u8 r = 128;
/* Avoid division by 0 and count 1 cannot be greater than count 0 */
- if (c0 && (c1 <= c0))
- r = c1 * 128 / c0;
- else
- return -1;
+ if (c1 <= c0)
+ if (c0) {
+ r = c1 * 128 / c0;
- /* Calculate LUX */
- lux = ((c0 - c1) * ratio_lut[r]) / 256;
+ /* Calculate LUX */
+ lux = ((c0 - c1) * ratio_lut[r]) / 256;
+ } else
+ lux = 0;
+ else
+ return -EAGAIN;
/* LUX range check */
return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index bd066bb..09f98ed 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -135,6 +135,7 @@
ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
hw[0].irq = 14;
+ hw[1].irq = 15;
return ide_host_add(d, hws, 2, NULL);
}
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 77f79d2..c509c99 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -92,6 +92,11 @@
return 0;
}
+bool ide_port_acpi(ide_hwif_t *hwif)
+{
+ return ide_noacpi == 0 && hwif->acpidata;
+}
+
/**
* ide_get_dev_handle - finds acpi_handle and PCI device.function
* @dev: device to locate
@@ -352,9 +357,6 @@
unsigned long gtf_address;
unsigned long obj_loc;
- if (ide_noacpi)
- return 0;
-
DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc);
@@ -389,16 +391,6 @@
struct acpi_buffer output;
union acpi_object *out_obj;
- if (ide_noacpi)
- return;
-
- DEBPRINT("ENTER:\n");
-
- if (!hwif->acpidata) {
- DEBPRINT("no ACPI data for %s\n", hwif->name);
- return;
- }
-
/* Setting up output buffer for _GTM */
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
@@ -479,16 +471,6 @@
struct ide_acpi_drive_link *master = &hwif->acpidata->master;
struct ide_acpi_drive_link *slave = &hwif->acpidata->slave;
- if (ide_noacpi)
- return;
-
- DEBPRINT("ENTER:\n");
-
- if (!hwif->acpidata) {
- DEBPRINT("no ACPI data for %s\n", hwif->name);
- return;
- }
-
/* Give the GTM buffer + drive Identify data to the channel via the
* _STM method: */
/* setup input parameters buffer for _STM */
@@ -527,16 +509,11 @@
ide_drive_t *drive;
int i;
- if (ide_noacpi || ide_noacpi_psx)
+ if (ide_noacpi_psx)
return;
DEBPRINT("ENTER:\n");
- if (!hwif->acpidata) {
- DEBPRINT("no ACPI data for %s\n", hwif->name);
- return;
- }
-
/* channel first and then drives for power on and verse versa for power off */
if (on)
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
@@ -616,7 +593,7 @@
drive->name, err);
}
- if (!ide_acpionboot) {
+ if (ide_noacpi || ide_acpionboot == 0) {
DEBPRINT("ACPI methods disabled on boot\n");
return;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4a19686..6a9a769 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -592,9 +592,19 @@
}
} else if (!blk_pc_request(rq)) {
ide_cd_request_sense_fixup(drive, cmd);
- /* complain if we still have data left to transfer */
+
uptodate = cmd->nleft ? 0 : 1;
- if (uptodate == 0)
+
+ /*
+ * suck out the remaining bytes from the drive in an
+ * attempt to complete the data xfer. (see BZ#13399)
+ */
+ if (!(stat & ATA_ERR) && !uptodate && thislen) {
+ ide_pio_bytes(drive, cmd, write, thislen);
+ uptodate = cmd->nleft ? 0 : 1;
+ }
+
+ if (!uptodate)
rq->cmd_flags |= REQ_FAILED;
}
goto out_end;
@@ -876,9 +886,12 @@
return stat;
/*
- * Sanity check the given block size
+ * Sanity check the given block size, in so far as making
+ * sure the sectors_per_frame we give to the caller won't
+ * end up being bogus.
*/
blocklen = be32_to_cpu(capbuf.blocklen);
+ blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS;
switch (blocklen) {
case 512:
case 1024:
@@ -886,10 +899,9 @@
case 4096:
break;
default:
- printk(KERN_ERR PFX "%s: weird block size %u\n",
+ printk_once(KERN_ERR PFX "%s: weird block size %u; "
+ "setting default block size to 2048\n",
drive->name, blocklen);
- printk(KERN_ERR PFX "%s: default to 2kb block size\n",
- drive->name);
blocklen = 2048;
break;
}
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index 5bf958e..1099bf7 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -183,6 +183,6 @@
err = setfunc(drive, *(int *)&rq->cmd[1]);
if (err)
rq->errors = err;
- ide_complete_rq(drive, err, ide_rq_bytes(rq));
+ ide_complete_rq(drive, err, blk_rq_bytes(rq));
return ide_stopped;
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 6951811..7f87801 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -455,6 +455,7 @@
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->special = cmd;
+ cmd->rq = rq;
}
ide_devset_get(multcount, mult_count);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 219e6fb..ee58c88 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -361,9 +361,6 @@
if (__ide_dma_bad_drive(drive))
return 0;
- if (ide_id_dma_bug(drive))
- return 0;
-
if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
@@ -394,24 +391,6 @@
return -1;
}
-int ide_id_dma_bug(ide_drive_t *drive)
-{
- u16 *id = drive->id;
-
- if (id[ATA_ID_FIELD_VALID] & 4) {
- if ((id[ATA_ID_UDMA_MODES] >> 8) &&
- (id[ATA_ID_MWDMA_MODES] >> 8))
- goto err_out;
- } else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
- (id[ATA_ID_SWDMA_MODES] >> 8))
- goto err_out;
-
- return 0;
-err_out:
- printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
- return 1;
-}
-
int ide_set_dma(ide_drive_t *drive)
{
int rc;
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 2b91419..e9abf2c 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -149,7 +149,7 @@
if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
if (err <= 0 && rq->errors == 0)
rq->errors = -EIO;
- ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq));
+ ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq));
}
}
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 8b3f204..fefbdfc 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -293,7 +293,7 @@
drive->failed_pc = NULL;
if (blk_fs_request(rq) == 0 && rq->errors == 0)
rq->errors = -EIO;
- ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
+ ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
return ide_stopped;
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1059f80..db96138 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -112,16 +112,6 @@
}
}
-/* obsolete, blk_rq_bytes() should be used instead */
-unsigned int ide_rq_bytes(struct request *rq)
-{
- if (blk_pc_request(rq))
- return blk_rq_bytes(rq);
- else
- return blk_rq_cur_sectors(rq) << 9;
-}
-EXPORT_SYMBOL_GPL(ide_rq_bytes);
-
int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
{
ide_hwif_t *hwif = drive->hwif;
@@ -152,14 +142,14 @@
if ((media == ide_floppy || media == ide_tape) && drv_req) {
rq->errors = 0;
- ide_complete_rq(drive, 0, blk_rq_bytes(rq));
} else {
if (media == ide_tape)
rq->errors = IDE_DRV_ERROR_GENERAL;
else if (blk_fs_request(rq) == 0 && rq->errors == 0)
rq->errors = -EIO;
- ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
}
+
+ ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
}
static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 82f252c..e246d3d 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -64,7 +64,8 @@
goto out;
}
- id = kmalloc(size, GFP_KERNEL);
+ /* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */
+ id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
if (id == NULL) {
rc = -ENOMEM;
goto out;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fa04715..2892b24 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -210,6 +210,7 @@
*/
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
+ { "QUANTUM FIREBALLlct20 30" , "APL.0900" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB00" },
@@ -329,9 +330,6 @@
kfree(id);
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
- ide_dma_off(drive);
-
return 1;
out_err:
if (rc == 2)
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index c14ca14..ad7be266 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -10,9 +10,11 @@
struct request_pm_state rqpm;
int ret;
- /* call ACPI _GTM only once */
- if ((drive->dn & 1) == 0 || pair == NULL)
- ide_acpi_get_timing(hwif);
+ if (ide_port_acpi(hwif)) {
+ /* call ACPI _GTM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL)
+ ide_acpi_get_timing(hwif);
+ }
memset(&rqpm, 0, sizeof(rqpm));
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
@@ -26,9 +28,11 @@
ret = blk_execute_rq(drive->queue, NULL, rq, 0);
blk_put_request(rq);
- /* call ACPI _PS3 only after both devices are suspended */
- if (ret == 0 && ((drive->dn & 1) || pair == NULL))
- ide_acpi_set_state(hwif, 0);
+ if (ret == 0 && ide_port_acpi(hwif)) {
+ /* call ACPI _PS3 only after both devices are suspended */
+ if ((drive->dn & 1) || pair == NULL)
+ ide_acpi_set_state(hwif, 0);
+ }
return ret;
}
@@ -42,13 +46,15 @@
struct request_pm_state rqpm;
int err;
- /* call ACPI _PS0 / _STM only once */
- if ((drive->dn & 1) == 0 || pair == NULL) {
- ide_acpi_set_state(hwif, 1);
- ide_acpi_push_timing(hwif);
- }
+ if (ide_port_acpi(hwif)) {
+ /* call ACPI _PS0 / _STM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL) {
+ ide_acpi_set_state(hwif, 1);
+ ide_acpi_push_timing(hwif);
+ }
- ide_acpi_exec_tfs(drive);
+ ide_acpi_exec_tfs(drive);
+ }
memset(&rqpm, 0, sizeof(rqpm));
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 51af4ee..1bb106f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -818,6 +818,24 @@
return j;
}
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ ide_host_for_each_port(i, hwif, host) {
+ if (hwif == NULL)
+ continue;
+
+ /* clear any pending IRQs */
+ hwif->tp_ops->read_status(hwif);
+
+ /* unmask IRQs */
+ if (hwif->io_ports.ctl_addr)
+ hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+ }
+}
+
/*
* This routine sets up the IRQ for an IDE interface.
*/
@@ -831,9 +849,6 @@
if (irq_handler == NULL)
irq_handler = ide_intr;
- if (io_ports->ctl_addr)
- hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
@@ -1404,6 +1419,8 @@
ide_port_tune_devices(hwif);
}
+ ide_host_enable_irqs(host);
+
ide_host_for_each_port(i, hwif, host) {
if (hwif == NULL)
continue;
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 013dc59..bc5fb12 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1064,6 +1064,7 @@
tape->best_dsc_rw_freq = config.dsc_rw_frequency;
break;
case 0x0350:
+ memset(&config, 0, sizeof(config));
config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
config.nr_stages = 1;
if (copy_to_user(argp, &config, sizeof(config)))
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 83b734a..52b25f8 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -880,6 +880,7 @@
}
shost->hostdata[0] = (unsigned long)lu;
+ shost->max_cmd_len = SBP2_MAX_CDB_SIZE;
if (!scsi_add_host(shost, &ud->device)) {
lu->shost = shost;
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index c5036f1..64a3a66 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -25,6 +25,12 @@
#define SBP2_DEVICE_NAME "sbp2"
/*
+ * There is no transport protocol limit to the CDB length, but we implement
+ * a fixed length only. 16 bytes is enough for disks larger than 2 TB.
+ */
+#define SBP2_MAX_CDB_SIZE 16
+
+/*
* SBP-2 specific definitions
*/
@@ -51,7 +57,7 @@
u32 data_descriptor_hi;
u32 data_descriptor_lo;
u32 misc;
- u8 cdb[12];
+ u8 cdb[SBP2_MAX_CDB_SIZE];
} __attribute__((packed));
#define SBP2_LOGIN_REQUEST 0x0
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 114efd8..1148140 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -608,8 +608,7 @@
p, compat_mode);
if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
- return str_to_user(dev_name(&evdev->dev),
- _IOC_SIZE(cmd), p);
+ return str_to_user(dev->name, _IOC_SIZE(cmd), p);
if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 0e12f89..4cfd084f 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -536,7 +536,7 @@
default:
if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
int len;
- const char *name = dev_name(&dev->dev);
+ const char *name = dev->name;
if (!name)
return 0;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index b868b8d..f155ad8 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -470,20 +470,20 @@
status = urb->status;
switch (status) {
- case 0:
+ case 0:
/* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __func__, status);
- goto exit;
+ return;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __func__, status);
+ return;
+
+ default:
+ dbg("%s - nonzero urb status received: %d", __func__, status);
+ goto exit;
}
exit:
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796..a6b989a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@
if INPUT_KEYBOARD
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ select INPUT_POLLDEV
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
config KEYBOARD_ATKBD
tristate "AT keyboard" if EMBEDDED || !X86
default y
@@ -68,16 +104,25 @@
right-hand column will be interpreted as the key shown in the
left-hand column.
-config KEYBOARD_SUNKBD
- tristate "Sun Type 4 and Type 5 keyboard"
- select SERIO
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
help
- Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
- connected either to the Sun keyboard connector or to an serial
- (RS-232) port via a simple adapter.
+ Say Y here if you want to use the BF54x keypad.
To compile this driver as a module, choose M here: the
- module will be called sunkbd.
+ module will be called bf54x-keys.
+
+config KEYBOARD_CORGI
+ tristate "Corgi keyboard"
+ depends on PXA_SHARPSL
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
+ series of PDAs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called corgikbd.
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
@@ -91,113 +136,38 @@
To compile this driver as a module, choose M here: the
module will be called lkkbd.
-config KEYBOARD_LOCOMO
- tristate "LoCoMo Keyboard Support"
- depends on SHARP_LOCOMO && INPUT_KEYBOARD
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
help
- Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
To compile this driver as a module, choose M here: the
- module will be called locomokbd.
+ module will be called ep93xx_keypad.
-config KEYBOARD_XTKBD
- tristate "XT keyboard"
- select SERIO
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GENERIC_GPIO
help
- Say Y here if you want to use the old IBM PC/XT keyboard (or
- compatible) on your system. This is only possible with a
- parallel port keyboard adapter, you cannot connect it to the
- keyboard port on a PC that runs Linux.
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
- module will be called xtkbd.
+ module will be called gpio_keys.
-config KEYBOARD_NEWTON
- tristate "Newton keyboard"
- select SERIO
+config KEYBOARD_MATRIX
+ tristate "GPIO driven matrix keypad support"
+ depends on GENERIC_GPIO
help
- Say Y here if you have a Newton keyboard on a serial port.
+ Enable support for GPIO driven matrix keypad.
To compile this driver as a module, choose M here: the
- module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
- tristate "Stowaway keyboard"
- select SERIO
- help
- Say Y here if you have a Stowaway keyboard on a serial port.
- Stowaway compatible keyboards like Dicota Input-PDA keyboard
- are also supported by this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called stowaway.
-
-config KEYBOARD_CORGI
- tristate "Corgi keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
- series of PDAs.
-
- To compile this driver as a module, choose M here: the
- module will be called corgikbd.
-
-config KEYBOARD_SPITZ
- tristate "Spitz keyboard"
- depends on PXA_SHARPSL
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
- SL-C3000 and Sl-C3100 series of PDAs.
-
- To compile this driver as a module, choose M here: the
- module will be called spitzkbd.
-
-config KEYBOARD_TOSA
- tristate "Tosa keyboard"
- depends on MACH_TOSA
- default y
- help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
-
- To compile this driver as a module, choose M here: the
- module will be called tosakbd.
-
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on KEYBOARD_TOSA
- default n
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
-
-config KEYBOARD_AMIGA
- tristate "Amiga keyboard"
- depends on AMIGA
- help
- Say Y here if you are running Linux on any AMIGA and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called amikbd.
-
-config ATARI_KBD_CORE
- bool
-
-config KEYBOARD_ATARI
- tristate "Atari keyboard"
- depends on ATARI
- select ATARI_KBD_CORE
- help
- Say Y here if you are running Linux on any Atari and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called atakbd.
+ module will be called matrix_keypad.
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
@@ -261,20 +231,39 @@
To compile this driver as a module, choose M here: the
module will be called lm8323.
-config KEYBOARD_OMAP
- tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
help
- Say Y here if you want to use the OMAP keypad.
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
To compile this driver as a module, choose M here: the
- module will be called omap-keypad.
+ module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx
help
- Enable support for PXA27x/PXA3xx keypad controller
+ Enable support for PXA27x/PXA3xx keypad controller.
To compile this driver as a module, choose M here: the
module will be called pxa27x_keypad.
@@ -288,51 +277,38 @@
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
-config KEYBOARD_AAED2000
- tristate "AAED-2000 keyboard"
- depends on MACH_AAED2000
- select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+ tristate "Spitz keyboard"
+ depends on PXA_SHARPSL
default y
help
- Say Y here to enable the keyboard on the Agilent AAED-2000
- development board.
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+ SL-C3000 and Sl-C3100 series of PDAs.
To compile this driver as a module, choose M here: the
- module will be called aaed2000_kbd.
+ module will be called spitzkbd.
-config KEYBOARD_GPIO
- tristate "GPIO Buttons"
- depends on GENERIC_GPIO
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
help
- This driver implements support for buttons connected
- to GPIO pins of various CPUs (and some other chips).
-
- Say Y here if your device has buttons connected
- directly to such GPIO pins. Your board-specific
- setup logic must also provide a platform device,
- with configuration data saying which GPIOs are used.
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
To compile this driver as a module, choose M here: the
- module will be called gpio-keys.
+ module will be called stowaway.
-config KEYBOARD_MAPLE
- tristate "Maple bus keyboard"
- depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
help
- Say Y here if you have a Dreamcast console running Linux and have
- a keyboard attached to its Maple bus.
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
To compile this driver as a module, choose M here: the
- module will be called maple_keyb.
-
-config KEYBOARD_BFIN
- tristate "Blackfin BF54x keypad support"
- depends on (BF54x && !BF544)
- help
- Say Y here if you want to use the BF54x keypad.
-
- To compile this driver as a module, choose M here: the
- module will be called bf54x-keys.
+ module will be called sunkbd.
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
@@ -344,13 +320,45 @@
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
-config KEYBOARD_EP93XX
- tristate "EP93xx Matrix Keypad support"
- depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on (ARCH_OMAP1 || ARCH_OMAP2)
help
- Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+ Say Y here if you want to use the OMAP keypad.
To compile this driver as a module, choose M here: the
- module will be called ep93xx_keypad.
+ module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+ tristate "Tosa keyboard"
+ depends on MACH_TOSA
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+ To compile this driver as a module, choose M here: the
+ module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on KEYBOARD_TOSA
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 156b647..b5b5eae 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -4,29 +4,30 @@
# Each configuration option enables a list of files.
-obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
-obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
-obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
-obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
+obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
-obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
-obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
-obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
+obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
-obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
-obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
+obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
+obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
+obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
+obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
+obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
+obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
-obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
-obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
-obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
-obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
-obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
-obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
-obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
+obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
+obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
+obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index df3f8aa..95fe045 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -895,6 +895,13 @@
};
/*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+ 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
+/*
* Amilo Xi 3650 key release for light touch bar not working
*/
static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
@@ -902,6 +909,13 @@
};
/*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+ 0xa0, 0xae, 0xb0, -1U
+};
+
+/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
*/
@@ -1568,6 +1582,15 @@
.driver_data = atkbd_amilo_pa1510_forced_release_keys,
},
{
+ .ident = "Fujitsu Amilo Pi 3525",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_pi3525_forced_release_keys,
+ },
+ {
.ident = "Fujitsu Amilo Xi 3650",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
@@ -1576,6 +1599,15 @@
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_amilo_xi3650_forced_release_keys,
},
+ {
+ .ident = "Soltech Corporation TA12",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkdb_soltech_ta12_forced_release_keys,
+ },
{ }
};
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2157cd7..efed0c9 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,7 +29,8 @@
struct gpio_button_data {
struct gpio_keys_button *button;
struct input_dev *input;
- struct delayed_work work;
+ struct timer_list timer;
+ struct work_struct work;
};
struct gpio_keys_drvdata {
@@ -40,7 +41,7 @@
static void gpio_keys_report_event(struct work_struct *work)
{
struct gpio_button_data *bdata =
- container_of(work, struct gpio_button_data, work.work);
+ container_of(work, struct gpio_button_data, work);
struct gpio_keys_button *button = bdata->button;
struct input_dev *input = bdata->input;
unsigned int type = button->type ?: EV_KEY;
@@ -50,17 +51,25 @@
input_sync(input);
}
+static void gpio_keys_timer(unsigned long _data)
+{
+ struct gpio_button_data *data = (struct gpio_button_data *)_data;
+
+ schedule_work(&data->work);
+}
+
static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
{
struct gpio_button_data *bdata = dev_id;
struct gpio_keys_button *button = bdata->button;
- unsigned long delay;
BUG_ON(irq != gpio_to_irq(button->gpio));
- delay = button->debounce_interval ?
- msecs_to_jiffies(button->debounce_interval) : 0;
- schedule_delayed_work(&bdata->work, delay);
+ if (button->debounce_interval)
+ mod_timer(&bdata->timer,
+ jiffies + msecs_to_jiffies(button->debounce_interval));
+ else
+ schedule_work(&bdata->work);
return IRQ_HANDLED;
}
@@ -107,7 +116,9 @@
bdata->input = input;
bdata->button = button;
- INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event);
+ setup_timer(&bdata->timer,
+ gpio_keys_timer, (unsigned long)bdata);
+ INIT_WORK(&bdata->work, gpio_keys_report_event);
error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
if (error < 0) {
@@ -166,7 +177,9 @@
fail2:
while (--i >= 0) {
free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
- cancel_delayed_work_sync(&ddata->data[i].work);
+ if (pdata->buttons[i].debounce_interval)
+ del_timer_sync(&ddata->data[i].timer);
+ cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
}
@@ -190,7 +203,9 @@
for (i = 0; i < pdata->nbuttons; i++) {
int irq = gpio_to_irq(pdata->buttons[i].gpio);
free_irq(irq, &ddata->data[i]);
- cancel_delayed_work_sync(&ddata->data[i].work);
+ if (pdata->buttons[i].debounce_interval)
+ del_timer_sync(&ddata->data[i].timer);
+ cancel_work_sync(&ddata->data[i].work);
gpio_free(pdata->buttons[i].gpio);
}
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
new file mode 100644
index 0000000..541b981
--- /dev/null
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -0,0 +1,453 @@
+/*
+ * GPIO driven matrix keyboard driver
+ *
+ * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on corgikbd.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+
+struct matrix_keypad {
+ const struct matrix_keypad_platform_data *pdata;
+ struct input_dev *input_dev;
+ unsigned short *keycodes;
+ unsigned int row_shift;
+
+ uint32_t last_key_state[MATRIX_MAX_COLS];
+ struct delayed_work work;
+ bool scan_pending;
+ bool stopped;
+ spinlock_t lock;
+};
+
+/*
+ * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
+ * minmal side effect when scanning other columns, here it is configured to
+ * be input, and it should work on most platforms.
+ */
+static void __activate_col(const struct matrix_keypad_platform_data *pdata,
+ int col, bool on)
+{
+ bool level_on = !pdata->active_low;
+
+ if (on) {
+ gpio_direction_output(pdata->col_gpios[col], level_on);
+ } else {
+ gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
+ gpio_direction_input(pdata->col_gpios[col]);
+ }
+}
+
+static void activate_col(const struct matrix_keypad_platform_data *pdata,
+ int col, bool on)
+{
+ __activate_col(pdata, col, on);
+
+ if (on && pdata->col_scan_delay_us)
+ udelay(pdata->col_scan_delay_us);
+}
+
+static void activate_all_cols(const struct matrix_keypad_platform_data *pdata,
+ bool on)
+{
+ int col;
+
+ for (col = 0; col < pdata->num_col_gpios; col++)
+ __activate_col(pdata, col, on);
+}
+
+static bool row_asserted(const struct matrix_keypad_platform_data *pdata,
+ int row)
+{
+ return gpio_get_value_cansleep(pdata->row_gpios[row]) ?
+ !pdata->active_low : pdata->active_low;
+}
+
+static void enable_row_irqs(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+static void disable_row_irqs(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+}
+
+/*
+ * This gets the keys from keyboard and reports it to input subsystem
+ */
+static void matrix_keypad_scan(struct work_struct *work)
+{
+ struct matrix_keypad *keypad =
+ container_of(work, struct matrix_keypad, work.work);
+ struct input_dev *input_dev = keypad->input_dev;
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ uint32_t new_state[MATRIX_MAX_COLS];
+ int row, col, code;
+
+ /* de-activate all columns for scanning */
+ activate_all_cols(pdata, false);
+
+ memset(new_state, 0, sizeof(new_state));
+
+ /* assert each column and read the row status out */
+ for (col = 0; col < pdata->num_col_gpios; col++) {
+
+ activate_col(pdata, col, true);
+
+ for (row = 0; row < pdata->num_row_gpios; row++)
+ new_state[col] |=
+ row_asserted(pdata, row) ? (1 << row) : 0;
+
+ activate_col(pdata, col, false);
+ }
+
+ for (col = 0; col < pdata->num_col_gpios; col++) {
+ uint32_t bits_changed;
+
+ bits_changed = keypad->last_key_state[col] ^ new_state[col];
+ if (bits_changed == 0)
+ continue;
+
+ for (row = 0; row < pdata->num_row_gpios; row++) {
+ if ((bits_changed & (1 << row)) == 0)
+ continue;
+
+ code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+ input_event(input_dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(input_dev,
+ keypad->keycodes[code],
+ new_state[col] & (1 << row));
+ }
+ }
+ input_sync(input_dev);
+
+ memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+ activate_all_cols(pdata, true);
+
+ /* Enable IRQs again */
+ spin_lock_irq(&keypad->lock);
+ keypad->scan_pending = false;
+ enable_row_irqs(keypad);
+ spin_unlock_irq(&keypad->lock);
+}
+
+static irqreturn_t matrix_keypad_interrupt(int irq, void *id)
+{
+ struct matrix_keypad *keypad = id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&keypad->lock, flags);
+
+ /*
+ * See if another IRQ beaten us to it and scheduled the
+ * scan already. In that case we should not try to
+ * disable IRQs again.
+ */
+ if (unlikely(keypad->scan_pending || keypad->stopped))
+ goto out;
+
+ disable_row_irqs(keypad);
+ keypad->scan_pending = true;
+ schedule_delayed_work(&keypad->work,
+ msecs_to_jiffies(keypad->pdata->debounce_ms));
+
+out:
+ spin_unlock_irqrestore(&keypad->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static int matrix_keypad_start(struct input_dev *dev)
+{
+ struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+ keypad->stopped = false;
+ mb();
+
+ /*
+ * Schedule an immediate key scan to capture current key state;
+ * columns will be activated and IRQs be enabled after the scan.
+ */
+ schedule_delayed_work(&keypad->work, 0);
+
+ return 0;
+}
+
+static void matrix_keypad_stop(struct input_dev *dev)
+{
+ struct matrix_keypad *keypad = input_get_drvdata(dev);
+
+ keypad->stopped = true;
+ mb();
+ flush_work(&keypad->work.work);
+ /*
+ * matrix_keypad_scan() will leave IRQs enabled;
+ * we should disable them now.
+ */
+ disable_row_irqs(keypad);
+}
+
+#ifdef CONFIG_PM
+static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ matrix_keypad_stop(keypad->input_dev);
+
+ if (device_may_wakeup(&pdev->dev))
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ enable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+ return 0;
+}
+
+static int matrix_keypad_resume(struct platform_device *pdev)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ if (device_may_wakeup(&pdev->dev))
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ disable_irq_wake(gpio_to_irq(pdata->row_gpios[i]));
+
+ matrix_keypad_start(keypad->input_dev);
+
+ return 0;
+}
+#else
+#define matrix_keypad_suspend NULL
+#define matrix_keypad_resume NULL
+#endif
+
+static int __devinit init_matrix_gpio(struct platform_device *pdev,
+ struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i, err = -EINVAL;
+
+ /* initialized strobe lines as outputs, activated */
+ for (i = 0; i < pdata->num_col_gpios; i++) {
+ err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col");
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to request GPIO%d for COL%d\n",
+ pdata->col_gpios[i], i);
+ goto err_free_cols;
+ }
+
+ gpio_direction_output(pdata->col_gpios[i], !pdata->active_low);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row");
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to request GPIO%d for ROW%d\n",
+ pdata->row_gpios[i], i);
+ goto err_free_rows;
+ }
+
+ gpio_direction_input(pdata->row_gpios[i]);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+ matrix_keypad_interrupt,
+ IRQF_DISABLED |
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "matrix-keypad", keypad);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to acquire interrupt for GPIO line %i\n",
+ pdata->row_gpios[i]);
+ goto err_free_irqs;
+ }
+ }
+
+ /* initialized as disabled - enabled by input->open */
+ disable_row_irqs(keypad);
+ return 0;
+
+err_free_irqs:
+ while (--i >= 0)
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ i = pdata->num_row_gpios;
+err_free_rows:
+ while (--i >= 0)
+ gpio_free(pdata->row_gpios[i]);
+ i = pdata->num_col_gpios;
+err_free_cols:
+ while (--i >= 0)
+ gpio_free(pdata->col_gpios[i]);
+
+ return err;
+}
+
+static int __devinit matrix_keypad_probe(struct platform_device *pdev)
+{
+ const struct matrix_keypad_platform_data *pdata;
+ const struct matrix_keymap_data *keymap_data;
+ struct matrix_keypad *keypad;
+ struct input_dev *input_dev;
+ unsigned short *keycodes;
+ unsigned int row_shift;
+ int i;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ keymap_data = pdata->keymap_data;
+ if (!keymap_data) {
+ dev_err(&pdev->dev, "no keymap data defined\n");
+ return -EINVAL;
+ }
+
+ row_shift = get_count_order(pdata->num_col_gpios);
+
+ keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
+ keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
+ sizeof(*keycodes),
+ GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!keypad || !keycodes || !input_dev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ keypad->input_dev = input_dev;
+ keypad->pdata = pdata;
+ keypad->keycodes = keycodes;
+ keypad->row_shift = row_shift;
+ keypad->stopped = true;
+ INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
+ spin_lock_init(&keypad->lock);
+
+ input_dev->name = pdev->name;
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->open = matrix_keypad_start;
+ input_dev->close = matrix_keypad_stop;
+
+ input_dev->keycode = keycodes;
+ input_dev->keycodesize = sizeof(*keycodes);
+ input_dev->keycodemax = pdata->num_row_gpios << keypad->row_shift;
+
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned short code = KEY_VAL(key);
+
+ keycodes[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+ __set_bit(code, input_dev->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
+ err = init_matrix_gpio(pdev, keypad);
+ if (err)
+ goto err_free_mem;
+
+ err = input_register_device(keypad->input_dev);
+ if (err)
+ goto err_free_mem;
+
+ device_init_wakeup(&pdev->dev, pdata->wakeup);
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(keycodes);
+ kfree(keypad);
+ return err;
+}
+
+static int __devexit matrix_keypad_remove(struct platform_device *pdev)
+{
+ struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ device_init_wakeup(&pdev->dev, 0);
+
+ for (i = 0; i < pdata->num_row_gpios; i++) {
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ gpio_free(pdata->row_gpios[i]);
+ }
+
+ for (i = 0; i < pdata->num_col_gpios; i++)
+ gpio_free(pdata->col_gpios[i]);
+
+ input_unregister_device(keypad->input_dev);
+ platform_set_drvdata(pdev, NULL);
+ kfree(keypad->keycodes);
+ kfree(keypad);
+
+ return 0;
+}
+
+static struct platform_driver matrix_keypad_driver = {
+ .probe = matrix_keypad_probe,
+ .remove = __devexit_p(matrix_keypad_remove),
+ .suspend = matrix_keypad_suspend,
+ .resume = matrix_keypad_resume,
+ .driver = {
+ .name = "matrix-keypad",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init matrix_keypad_init(void)
+{
+ return platform_driver_register(&matrix_keypad_driver);
+}
+
+static void __exit matrix_keypad_exit(void)
+{
+ platform_driver_unregister(&matrix_keypad_driver);
+}
+
+module_init(matrix_keypad_init);
+module_exit(matrix_keypad_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:matrix-keypad");
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 2adf9cb..d114d3a 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -1,7 +1,7 @@
/*
* Cobalt button interface driver.
*
- * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -148,7 +148,7 @@
return 0;
}
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("Cobalt button interface driver");
MODULE_LICENSE("GPL");
/* work with hotplug and coldplug */
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 6d67af5..21cb755 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -114,7 +114,7 @@
return 0;
}
-static int pcspkr_suspend(struct platform_device *dev, pm_message_t state)
+static int pcspkr_suspend(struct device *dev)
{
pcspkr_event(NULL, EV_SND, SND_BELL, 0);
@@ -127,14 +127,18 @@
pcspkr_event(NULL, EV_SND, SND_BELL, 0);
}
+static struct dev_pm_ops pcspkr_pm_ops = {
+ .suspend = pcspkr_suspend,
+};
+
static struct platform_driver pcspkr_platform_driver = {
.driver = {
.name = "pcspkr",
.owner = THIS_MODULE,
+ .pm = &pcspkr_pm_ops,
},
.probe = pcspkr_probe,
.remove = __devexit_p(pcspkr_remove),
- .suspend = pcspkr_suspend,
.shutdown = pcspkr_shutdown,
};
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 7c8957d..27ee976 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -611,6 +611,20 @@
{ KE_END, 0 }
};
+static struct key_entry keymap_prestigio[] __initdata = {
+ { KE_KEY, 0x11, {KEY_PROG1} },
+ { KE_KEY, 0x12, {KEY_PROG2} },
+ { KE_WIFI, 0x30 },
+ { KE_KEY, 0x22, {KEY_REWIND} },
+ { KE_KEY, 0x23, {KEY_FORWARD} },
+ { KE_KEY, 0x24, {KEY_PLAYPAUSE} },
+ { KE_KEY, 0x25, {KEY_STOPCD} },
+ { KE_KEY, 0x31, {KEY_MAIL} },
+ { KE_KEY, 0x36, {KEY_WWW} },
+ { KE_END, 0 }
+};
+
+
/*
* If your machine is not here (which is currently rather likely), please send
* a list of buttons and their key codes (reported when loading this module
@@ -646,6 +660,15 @@
},
{
.callback = dmi_matched,
+ .ident = "Maxdata Pro 7000 DX",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"),
+ },
+ .driver_data = keymap_fs_amilo_pro_v2000
+ },
+ {
+ .callback = dmi_matched,
.ident = "Fujitsu N3510",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -962,6 +985,8 @@
if (keymap_name != NULL) {
if (strcmp (keymap_name, "1557/MS2141") == 0)
keymap = keymap_wistron_ms2141;
+ else if (strcmp (keymap_name, "prestigio") == 0)
+ keymap = keymap_prestigio;
else if (strcmp (keymap_name, "generic") == 0)
keymap = keymap_wistron_generic;
else {
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 5e5eb88..7b6ce17 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -46,7 +46,7 @@
input_sync(input);
}
-static int __init gpio_mouse_probe(struct platform_device *pdev)
+static int __devinit gpio_mouse_probe(struct platform_device *pdev)
{
struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
struct input_polled_dev *input_poll;
@@ -170,10 +170,8 @@
return 0;
}
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:gpio_mouse");
-
static struct platform_driver gpio_mouse_device_driver = {
+ .probe = gpio_mouse_probe,
.remove = __devexit_p(gpio_mouse_remove),
.driver = {
.name = "gpio_mouse",
@@ -183,8 +181,7 @@
static int __init gpio_mouse_init(void)
{
- return platform_driver_probe(&gpio_mouse_device_driver,
- gpio_mouse_probe);
+ return platform_driver_register(&gpio_mouse_device_driver);
}
module_init(gpio_mouse_init);
@@ -197,3 +194,5 @@
MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
MODULE_DESCRIPTION("GPIO mouse driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
+
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index b587e2d..820e516 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -296,7 +296,7 @@
priv->tseq[3] = 0;
if (mlc->opacket & HIL_CTRL_APE) {
priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
- down_trylock(&mlc->csem);
+ BUG_ON(down_trylock(&mlc->csem));
}
enqueue:
hp_sdc_enqueue_transaction(&priv->trans);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fb8a3cd..ae04d8a4 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -78,6 +78,14 @@
},
},
{
+ .ident = "ASUS G1S",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "G1S"),
+ DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+ },
+ },
+ {
/* AUX LOOP command does not raise AUX IRQ */
.ident = "ASUS P65UP5",
.matches = {
@@ -392,6 +400,34 @@
DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
},
},
+ {
+ .ident = "Acer Aspire One 150",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
+ },
+ },
+ {
+ .ident = "Advent 4211",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
+ },
+ },
+ {
+ .ident = "Medion Akoya Mini E1210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
+ },
+ },
+ {
+ .ident = "Mivvy M310",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
+ },
+ },
{ }
};
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index f919bf5..582245c 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -934,10 +934,11 @@
static int i8042_suspend(struct platform_device *dev, pm_message_t state)
{
- if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) {
+ if (!i8042_suspended && state.event == PM_EVENT_SUSPEND)
i8042_controller_reset();
- i8042_suspended = true;
- }
+
+ i8042_suspended = state.event == PM_EVENT_SUSPEND ||
+ state.event == PM_EVENT_FREEZE;
return 0;
}
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index fb17573..d66f494 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -935,10 +935,11 @@
{
struct serio *serio = to_serio_port(dev);
- if (!serio->suspended && state.event == PM_EVENT_SUSPEND) {
+ if (!serio->suspended && state.event == PM_EVENT_SUSPEND)
serio_cleanup(serio);
- serio->suspended = true;
- }
+
+ serio->suspended = state.event == PM_EVENT_SUSPEND ||
+ state.event == PM_EVENT_FREEZE;
return 0;
}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 38bf863..c896d6a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -384,6 +384,8 @@
wacom_report_key(wcombo, BTN_STYLUS2, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom_report_abs(wcombo, ABS_WHEEL, 0);
+ if (wacom->features->type >= INTUOS3S)
+ wacom_report_abs(wcombo, ABS_Z, 0);
}
wacom_report_key(wcombo, wacom->tool[idx], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
@@ -836,6 +838,7 @@
{ "Wacom DTU710", 8, 34080, 27660, 511, 0, PL },
{ "Wacom DTF521", 8, 6282, 4762, 511, 0, PL },
{ "Wacom DTF720", 8, 6858, 5506, 511, 0, PL },
+ { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL },
{ "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
@@ -897,8 +900,9 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ec51696..2d91049 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -294,32 +294,33 @@
{RSP_OK, 604,604, -1, 605, 5, {ACT_CMD+AT_MSN}},
{RSP_OK, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}},
{RSP_NULL, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}},
- {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"}, /* set "Endgeraetemodus" */
+ {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"},
{RSP_OK, 607,607, -1, 608,-1},
- //{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 608, 0, {ACT_ERROR}},//DELETE
{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 609, 5, {ACT_CMD+AT_DIAL}},
{RSP_OK, 609,609, -1, 650, 0, {ACT_DIALING}},
- {RSP_ZVLS, 608,608, 17, -1,-1, {ACT_DEBUG}},
- {RSP_ZCTP, 609,609, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZCPN, 609,609, -1, -1,-1, {ACT_DEBUG}},
{RSP_ERROR, 601,609, -1, 0, 0, {ACT_ABORTDIAL}},
{EV_TIMEOUT, 601,609, -1, 0, 0, {ACT_ABORTDIAL}},
- /* dialing */
- {RSP_ZCTP, 650,650, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZCPN, 650,650, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZSAU, 650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */
+ /* optional dialing responses */
+ {EV_BC_OPEN, 650,650, -1, 651,-1},
+ {RSP_ZVLS, 608,651, 17, -1,-1, {ACT_DEBUG}},
+ {RSP_ZCTP, 609,651, -1, -1,-1, {ACT_DEBUG}},
+ {RSP_ZCPN, 609,651, -1, -1,-1, {ACT_DEBUG}},
+ {RSP_ZSAU, 650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
- /* connection established */
- {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
- {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-
- {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout
+ /* connect */
+ {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}},
+ {RSP_ZSAU, 651,651,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT,
+ ACT_NOTIFY_BC_UP}},
+ {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}},
+ {RSP_ZSAU, 751,751,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT,
+ ACT_NOTIFY_BC_UP}},
+ {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}},
/* remote hangup */
- {RSP_ZSAU, 650,650,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}},
- {RSP_ZSAU, 750,750,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
+ {RSP_ZSAU, 650,651,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}},
+ {RSP_ZSAU, 750,751,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
{RSP_ZSAU, 800,800,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
/* hangup */
@@ -358,7 +359,8 @@
{RSP_ZSAU, 700,729,ZSAU_ACTIVE, 0, 0, {ACT_ABORTACCEPT}},
{RSP_ZSAU, 700,729,ZSAU_DISCONNECT_IND, 0, 0, {ACT_ABORTACCEPT}},
- {EV_TIMEOUT, 750,750, -1, 0, 0, {ACT_CONNTIMEOUT}},
+ {EV_BC_OPEN, 750,750, -1, 751,-1},
+ {EV_TIMEOUT, 750,751, -1, 0, 0, {ACT_CONNTIMEOUT}},
/* B channel closed (general case) */
{EV_BC_CLOSED, -1, -1, -1, -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
@@ -876,12 +878,6 @@
static void bchannel_up(struct bc_state *bcs)
{
- if (!(bcs->chstate & CHS_D_UP)) {
- dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__);
- bcs->chstate |= CHS_D_UP;
- gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
- }
-
if (bcs->chstate & CHS_B_UP) {
dev_notice(bcs->cs->dev, "%s: B channel already up\n",
__func__);
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 1ebfcab..8ff7e35 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -408,6 +408,8 @@
return retval;
}
+/* FIXME: This function does not have error returns */
+
static int if_chars_in_buffer(struct tty_struct *tty)
{
struct cardstate *cs;
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index db3a1e4..bed38fc 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -174,12 +174,6 @@
pr_err("invalid size %d\n", size);
return -EINVAL;
}
- src = iwb->read;
- if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
- (read < src && limit >= src))) {
- pr_err("isoc write buffer frame reservation violated\n");
- return -EFAULT;
- }
#endif
if (read < write) {
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 8df889b..9de5420 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -37,7 +37,6 @@
#include <linux/kernel_stat.h>
#include <linux/usb.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/sched.h>
#include <linux/moduleparam.h>
#include "hisax.h"
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b4d4522..2881a66 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -13,6 +13,7 @@
#include <linux/isdn.h>
#include <linux/delay.h>
+#include <linux/smp_lock.h>
#include "isdn_common.h"
#include "isdn_tty.h"
#ifdef CONFIG_ISDN_AUDIO
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 990e6a7..7e5f30d 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -731,10 +731,10 @@
while (!signal_pending(current)) {
struct kvec iov = {
.iov_base = recvbuf,
- .iov_len = sizeof(recvbuf),
+ .iov_len = recvbuf_size,
};
recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
- sizeof(recvbuf), 0);
+ recvbuf_size, 0);
if (recvlen > 0) {
l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
} else {
@@ -1480,7 +1480,7 @@
return -ENOMEM;
l1oip_cnt = 0;
- while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+ while (l1oip_cnt < MAX_CARDS && type[l1oip_cnt]) {
switch (type[l1oip_cnt] & 0xff) {
case 1:
pri = 0;
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index e2f4501..3e1532a 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -17,6 +17,7 @@
#include <linux/mISDNif.h>
#include <linux/kthread.h>
+#include <linux/smp_lock.h>
#include "core.h"
static u_int *debug;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9b60b6b..7c8e7122a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -75,6 +75,7 @@
depends on LEDS_CLASS && X86 && EXPERIMENTAL
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+ You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
@@ -145,15 +146,16 @@
of_platform devices. For instance, LEDs which are listed in a "dts"
file.
-config LEDS_LP5521
- tristate "LED Support for the LP5521 LEDs"
+config LEDS_LP3944
+ tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS && I2C
help
- If you say 'Y' here you get support for the National Semiconductor
- LP5521 LED driver used in n8x0 boards.
+ This option enables support for LEDs connected to the National
+ Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+ Fun Light Chip.
- This driver can be built as a module by choosing 'M'. The module
- will be called leds-lp5521.
+ To compile this driver as a module, choose M here: the
+ module will be called leds-lp3944.
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2d41c4d..e8cdcf7 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
index ddbd773..731d4ee 100644
--- a/drivers/leds/leds-alix2.c
+++ b/drivers/leds/leds-alix2.c
@@ -14,7 +14,7 @@
static int force = 0;
module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs");
+MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
struct alix_led {
struct led_classdev cdev;
@@ -155,6 +155,11 @@
goto out;
}
+ /* enable output on GPIO for LED 1,2,3 */
+ outl(1 << 6, 0x6104);
+ outl(1 << 9, 0x6184);
+ outl(1 << 11, 0x6184);
+
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
if (!IS_ERR(pdev)) {
ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 4149ecb..779d7f2 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -97,6 +97,10 @@
enum led_ids led_id;
enum led_colors color;
enum led_bits state;
+
+ /* General attributes of RGB LEDs */
+ int wave_pattern;
+ int rgb_current;
};
@@ -254,7 +258,7 @@
bd2802_reset_cancel(led);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
- bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
@@ -275,9 +279,9 @@
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
- bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
- bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+ bd2802_write_byte(led->client, reg, led->wave_pattern);
bd2802_enable(led, id);
bd2802_update_state(led, id, color, BD2802_BLINK);
@@ -406,7 +410,7 @@
ret = device_create_file(&led->client->dev,
bd2802_addr_attributes[i]);
if (ret) {
- dev_err(&led->client->dev, "failed to sysfs file %s\n",
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
bd2802_addr_attributes[i]->attr.name);
goto failed_remove_files;
}
@@ -483,6 +487,52 @@
.store = bd2802_store_adv_conf,
};
+#define BD2802_CONTROL_ATTR(attr_name, name_str) \
+static ssize_t bd2802_show_##attr_name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ ssize_t ret; \
+ down_read(&led->rwsem); \
+ ret = sprintf(buf, "0x%02x\n", led->attr_name); \
+ up_read(&led->rwsem); \
+ return ret; \
+} \
+static ssize_t bd2802_store_##attr_name(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ unsigned long val; \
+ int ret; \
+ if (!count) \
+ return -EINVAL; \
+ ret = strict_strtoul(buf, 16, &val); \
+ if (ret) \
+ return ret; \
+ down_write(&led->rwsem); \
+ led->attr_name = val; \
+ up_write(&led->rwsem); \
+ return count; \
+} \
+static struct device_attribute bd2802_##attr_name##_attr = { \
+ .attr = { \
+ .name = name_str, \
+ .mode = 0644, \
+ .owner = THIS_MODULE \
+ }, \
+ .show = bd2802_show_##attr_name, \
+ .store = bd2802_store_##attr_name, \
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+ &bd2802_adv_conf_attr,
+ &bd2802_wave_pattern_attr,
+ &bd2802_rgb_current_attr,
+};
+
static void bd2802_led_work(struct work_struct *work)
{
struct bd2802_led *led = container_of(work, struct bd2802_led, work);
@@ -538,7 +588,6 @@
led->cdev_led1r.brightness = LED_OFF;
led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
- led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
if (ret < 0) {
@@ -551,7 +600,6 @@
led->cdev_led1g.brightness = LED_OFF;
led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
- led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
if (ret < 0) {
@@ -564,7 +612,6 @@
led->cdev_led1b.brightness = LED_OFF;
led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
- led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
if (ret < 0) {
@@ -577,7 +624,6 @@
led->cdev_led2r.brightness = LED_OFF;
led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
- led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
if (ret < 0) {
@@ -590,7 +636,6 @@
led->cdev_led2g.brightness = LED_OFF;
led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
- led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
if (ret < 0) {
@@ -640,7 +685,7 @@
{
struct bd2802_led *led;
struct bd2802_led_platform_data *pdata;
- int ret;
+ int ret, i;
led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
if (!led) {
@@ -670,13 +715,20 @@
/* To save the power, reset BD2802 after detecting */
gpio_set_value(led->pdata->reset_gpio, 0);
+ /* Default attributes */
+ led->wave_pattern = BD2802_PATTERN_HALF;
+ led->rgb_current = BD2802_CURRENT_032;
+
init_rwsem(&led->rwsem);
- ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
- if (ret) {
- dev_err(&client->dev, "failed to create sysfs file %s\n",
- bd2802_adv_conf_attr.attr.name);
- goto failed_free;
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+ ret = device_create_file(&led->client->dev,
+ bd2802_attributes[i]);
+ if (ret) {
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
+ bd2802_attributes[i]->attr.name);
+ goto failed_unregister_dev_file;
+ }
}
ret = bd2802_register_led_classdev(led);
@@ -686,7 +738,8 @@
return 0;
failed_unregister_dev_file:
- device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+ for (i--; i >= 0; i--)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
failed_free:
i2c_set_clientdata(client, NULL);
kfree(led);
@@ -697,12 +750,14 @@
static int __exit bd2802_remove(struct i2c_client *client)
{
struct bd2802_led *led = i2c_get_clientdata(client);
+ int i;
- bd2802_unregister_led_classdev(led);
gpio_set_value(led->pdata->reset_gpio, 0);
+ bd2802_unregister_led_classdev(led);
if (led->adf_on)
bd2802_disable_adv_conf(led);
- device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
i2c_set_clientdata(client, NULL);
kfree(led);
@@ -723,8 +778,7 @@
struct bd2802_led *led = i2c_get_clientdata(client);
if (!bd2802_is_all_off(led) || led->adf_on) {
- gpio_set_value(led->pdata->reset_gpio, 1);
- udelay(100);
+ bd2802_reset_cancel(led);
bd2802_restore_state(led);
}
@@ -762,4 +816,4 @@
MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
MODULE_DESCRIPTION("BD2802 LED driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index ff0e8c3..5f1ce81 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -1,7 +1,7 @@
/*
* LEDs driver for the Cobalt Raq series.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d210905..6b06638 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -76,7 +76,7 @@
struct gpio_led_data *led_dat, struct device *parent,
int (*blink_set)(unsigned, unsigned long *, unsigned long *))
{
- int ret;
+ int ret, state;
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
@@ -99,11 +99,15 @@
led_dat->cdev.blink_set = gpio_blink_set;
}
led_dat->cdev.brightness_set = gpio_led_set;
- led_dat->cdev.brightness = LED_OFF;
+ if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
+ state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+ else
+ state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+ led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
- ret = gpio_direction_output(led_dat->gpio, led_dat->active_low);
+ ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
if (ret < 0)
goto err;
@@ -129,7 +133,7 @@
}
#ifdef CONFIG_LEDS_GPIO_PLATFORM
-static int gpio_led_probe(struct platform_device *pdev)
+static int __devinit gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct gpio_led_data *leds_data;
@@ -223,12 +227,22 @@
memset(&led, 0, sizeof(led));
for_each_child_of_node(np, child) {
enum of_gpio_flags flags;
+ const char *state;
led.gpio = of_get_gpio_flags(child, 0, &flags);
led.active_low = flags & OF_GPIO_ACTIVE_LOW;
led.name = of_get_property(child, "label", NULL) ? : child->name;
led.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
+ state = of_get_property(child, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep"))
+ led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ else if(!strcmp(state, "on"))
+ led.default_state = LEDS_GPIO_DEFSTATE_ON;
+ else
+ led.default_state = LEDS_GPIO_DEFSTATE_OFF;
+ }
ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++],
&ofdev->dev, NULL);
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
new file mode 100644
index 0000000..5946208
--- /dev/null
+++ b/drivers/leds/leds-lp3944.c
@@ -0,0 +1,466 @@
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ * - period: from 0s to 1.6s
+ * - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8 0x08
+#define LP3944_REG_REGISTER9 0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+ u8 id;
+ enum lp3944_type type;
+ enum lp3944_status status;
+ struct led_classdev ldev;
+ struct i2c_client *client;
+ struct work_struct work;
+};
+
+struct lp3944_data {
+ struct mutex lock;
+ struct i2c_client *client;
+ struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+ int tmp;
+
+ tmp = i2c_smbus_read_byte_data(client, reg);
+ if (tmp < 0)
+ return -EINVAL;
+
+ *value = tmp;
+
+ return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+ u8 psc_reg;
+ u8 psc_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ psc_reg = LP3944_REG_PSC0;
+ else if (dim == LP3944_DIM1)
+ psc_reg = LP3944_REG_PSC1;
+ else
+ return -EINVAL;
+
+ /* Convert period to Prescaler value */
+ if (period > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+ err = lp3944_reg_write(client, psc_reg, psc_value);
+
+ return err;
+}
+
+/**
+ * Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+ u8 duty_cycle)
+{
+ u8 pwm_reg;
+ u8 pwm_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ pwm_reg = LP3944_REG_PWM0;
+ else if (dim == LP3944_DIM1)
+ pwm_reg = LP3944_REG_PWM1;
+ else
+ return -EINVAL;
+
+ /* Convert duty cycle to PWM value */
+ if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+ return -EINVAL;
+
+ pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+ err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+ return err;
+}
+
+/**
+ * Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ * LP3944_LED_STATUS_ON
+ * LP3944_LED_STATUS_DIM0
+ * LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+ struct lp3944_data *data = i2c_get_clientdata(led->client);
+ u8 id = led->id;
+ u8 reg;
+ u8 val = 0;
+ int err;
+
+ dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+ __func__, led->ldev.name, status);
+
+ switch (id) {
+ case LP3944_LED0:
+ case LP3944_LED1:
+ case LP3944_LED2:
+ case LP3944_LED3:
+ reg = LP3944_REG_LS0;
+ break;
+ case LP3944_LED4:
+ case LP3944_LED5:
+ case LP3944_LED6:
+ case LP3944_LED7:
+ id -= LP3944_LED4;
+ reg = LP3944_REG_LS1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (status > LP3944_LED_STATUS_DIM1)
+ return -EINVAL;
+
+ /* invert only 0 and 1, leave unchanged the other values,
+ * remember we are abusing status to set blink patterns
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+ status = 1 - status;
+
+ mutex_lock(&data->lock);
+ lp3944_reg_read(led->client, reg, &val);
+
+ val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+ val |= (status << (id << 1));
+
+ dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+ __func__, led->ldev.name, reg, id, status, val);
+
+ /* set led status */
+ err = lp3944_reg_write(led->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+ u16 period;
+ u8 duty_cycle;
+ int err;
+
+ /* units are in ms */
+ if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* Special case: the leds subsystem requires a default user
+ * friendly blink pattern for the LED. Let's blink the led
+ * slowly (1Hz).
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = (*delay_on) + (*delay_off);
+
+ /* duty_cycle is the percentage of period during which the led is ON */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ /* invert duty cycle for inverted leds, this has the same effect of
+ * swapping delay_on and delay_off
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+ duty_cycle = 100 - duty_cycle;
+
+ /* NOTE: using always the first DIM mode, this means that all leds
+ * will have the same blinking pattern.
+ *
+ * We could find a way later to have two leds blinking in hardware
+ * with different patterns at the same time, falling back to software
+ * control for the other ones.
+ */
+ err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+ if (err)
+ return err;
+
+ err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+ if (err)
+ return err;
+
+ dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+ __func__);
+
+ led->status = LP3944_LED_STATUS_DIM0;
+ schedule_work(&led->work);
+
+ return 0;
+}
+
+static void lp3944_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+ dev_dbg(&led->client->dev, "%s: %s, %d\n",
+ __func__, led_cdev->name, brightness);
+
+ led->status = brightness;
+ schedule_work(&led->work);
+}
+
+static void lp3944_led_work(struct work_struct *work)
+{
+ struct lp3944_led_data *led;
+
+ led = container_of(work, struct lp3944_led_data, work);
+ lp3944_led_set(led, led->status);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+ struct lp3944_data *data,
+ struct lp3944_platform_data *pdata)
+{
+ int i, err = 0;
+
+ for (i = 0; i < pdata->leds_size; i++) {
+ struct lp3944_led *pled = &pdata->leds[i];
+ struct lp3944_led_data *led = &data->leds[i];
+ led->client = client;
+ led->id = i;
+
+ switch (pled->type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led->type = pled->type;
+ led->status = pled->status;
+ led->ldev.name = pled->name;
+ led->ldev.max_brightness = 1;
+ led->ldev.brightness_set = lp3944_led_set_brightness;
+ led->ldev.blink_set = lp3944_led_set_blink;
+ led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+ INIT_WORK(&led->work, lp3944_led_work);
+ err = led_classdev_register(&client->dev, &led->ldev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led->ldev.name);
+ goto exit;
+ }
+
+ /* to expose the default value to userspace */
+ led->ldev.brightness = led->status;
+
+ /* Set the default led status */
+ err = lp3944_led_set(led, led->status);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "%s couldn't set STATUS %d\n",
+ led->ldev.name, led->status);
+ goto exit;
+ }
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+
+ }
+ }
+ return 0;
+
+exit:
+ if (i > 0)
+ for (i = i - 1; i >= 0; i--)
+ switch (pdata->leds[i].type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ return err;
+}
+
+static int __devinit lp3944_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
+ struct lp3944_data *data;
+
+ if (lp3944_pdata == NULL) {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ /* Let's see whether this adapter can support what we need. */
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "insufficient functionality!\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ dev_info(&client->dev, "lp3944 enabled\n");
+
+ lp3944_configure(client, data, lp3944_pdata);
+ return 0;
+}
+
+static int __devexit lp3944_remove(struct i2c_client *client)
+{
+ struct lp3944_platform_data *pdata = client->dev.platform_data;
+ struct lp3944_data *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->leds_size; i++)
+ switch (data->leds[i].type) {
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ kfree(data);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+ {"lp3944", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+ .driver = {
+ .name = "lp3944",
+ },
+ .probe = lp3944_probe,
+ .remove = __devexit_p(lp3944_remove),
+ .id_table = lp3944_id,
+};
+
+static int __init lp3944_module_init(void)
+{
+ return i2c_add_driver(&lp3944_driver);
+}
+
+static void __exit lp3944_module_exit(void)
+{
+ i2c_del_driver(&lp3944_driver);
+}
+
+module_init(lp3944_module_init);
+module_exit(lp3944_module_exit);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 3937244..dba8921 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -35,7 +35,7 @@
struct pca9532_led leds[16];
struct mutex update_lock;
struct input_dev *idev;
- struct work_struct work;
+ struct work_struct work;
u8 pwm[2];
u8 psc[2];
};
@@ -87,14 +87,14 @@
if (b > 0xFF)
return -EINVAL;
data->pwm[pwm] = b;
- data->psc[pwm] = blink;
- return 0;
+ data->psc[pwm] = blink;
+ return 0;
}
static int pca9532_setpwm(struct i2c_client *client, int pwm)
{
- struct pca9532_data *data = i2c_get_clientdata(client);
- mutex_lock(&data->update_lock);
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
data->pwm[pwm]);
i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
@@ -132,11 +132,11 @@
led->state = PCA9532_ON;
else {
led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
- err = pca9532_calcpwm(led->client, 0, 0, value);
+ err = pca9532_calcpwm(led->client, 0, 0, value);
if (err)
return; /* XXX: led api doesn't allow error code? */
}
- schedule_work(&led->work);
+ schedule_work(&led->work);
}
static int pca9532_set_blink(struct led_classdev *led_cdev,
@@ -145,7 +145,7 @@
struct pca9532_led *led = ldev_to_led(led_cdev);
struct i2c_client *client = led->client;
int psc;
- int err = 0;
+ int err = 0;
if (*delay_on == 0 && *delay_off == 0) {
/* led subsystem ask us for a blink rate */
@@ -157,11 +157,11 @@
/* Thecus specific: only use PSC/PWM 0 */
psc = (*delay_on * 152-1)/1000;
- err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
- if (err)
- return err;
- schedule_work(&led->work);
- return 0;
+ err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+ if (err)
+ return err;
+ schedule_work(&led->work);
+ return 0;
}
static int pca9532_event(struct input_dev *dev, unsigned int type,
@@ -178,15 +178,15 @@
else
data->pwm[1] = 0;
- schedule_work(&data->work);
+ schedule_work(&data->work);
- return 0;
+ return 0;
}
static void pca9532_input_work(struct work_struct *work)
{
- struct pca9532_data *data;
- data = container_of(work, struct pca9532_data, work);
+ struct pca9532_data *data;
+ data = container_of(work, struct pca9532_data, work);
mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
data->pwm[1]);
@@ -195,11 +195,11 @@
static void pca9532_led_work(struct work_struct *work)
{
- struct pca9532_led *led;
- led = container_of(work, struct pca9532_led, work);
- if (led->state == PCA9532_PWM0)
- pca9532_setpwm(led->client, 0);
- pca9532_setled(led);
+ struct pca9532_led *led;
+ led = container_of(work, struct pca9532_led, work);
+ if (led->state == PCA9532_PWM0)
+ pca9532_setpwm(led->client, 0);
+ pca9532_setled(led);
}
static int pca9532_configure(struct i2c_client *client,
@@ -232,7 +232,7 @@
led->ldev.brightness = LED_OFF;
led->ldev.brightness_set = pca9532_set_brightness;
led->ldev.blink_set = pca9532_set_blink;
- INIT_WORK(&led->work, pca9532_led_work);
+ INIT_WORK(&led->work, pca9532_led_work);
err = led_classdev_register(&client->dev, &led->ldev);
if (err < 0) {
dev_err(&client->dev,
@@ -262,11 +262,11 @@
BIT_MASK(SND_TONE);
data->idev->event = pca9532_event;
input_set_drvdata(data->idev, data);
- INIT_WORK(&data->work, pca9532_input_work);
+ INIT_WORK(&data->work, pca9532_input_work);
err = input_register_device(data->idev);
if (err) {
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
goto exit;
}
@@ -283,13 +283,13 @@
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
- cancel_work_sync(&data->leds[i].work);
+ cancel_work_sync(&data->leds[i].work);
break;
case PCA9532_TYPE_N2100_BEEP:
if (data->idev != NULL) {
input_unregister_device(data->idev);
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
}
break;
@@ -340,13 +340,13 @@
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
- cancel_work_sync(&data->leds[i].work);
+ cancel_work_sync(&data->leds[i].work);
break;
case PCA9532_TYPE_N2100_BEEP:
if (data->idev != NULL) {
input_unregister_device(data->idev);
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
}
break;
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index a6974e9..1e2cb84 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,6 +1,8 @@
-/*P:400 This contains run_guest() which actually calls into the Host<->Guest
+/*P:400
+ * This contains run_guest() which actually calls into the Host<->Guest
* Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something. This file also contains useful helper routines. :*/
+ * Host to do something. This file also contains useful helper routines.
+:*/
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/stddef.h>
@@ -24,7 +26,8 @@
/* This One Big lock protects all inter-guest data structures. */
DEFINE_MUTEX(lguest_lock);
-/*H:010 We need to set up the Switcher at a high virtual address. Remember the
+/*H:010
+ * We need to set up the Switcher at a high virtual address. Remember the
* Switcher is a few hundred bytes of assembler code which actually changes the
* CPU to run the Guest, and then changes back to the Host when a trap or
* interrupt happens.
@@ -33,7 +36,8 @@
* Host since it will be running as the switchover occurs.
*
* Trying to map memory at a particular address is an unusual thing to do, so
- * it's not a simple one-liner. */
+ * it's not a simple one-liner.
+ */
static __init int map_switcher(void)
{
int i, err;
@@ -47,8 +51,10 @@
* easy.
*/
- /* We allocate an array of struct page pointers. map_vm_area() wants
- * this, rather than just an array of pages. */
+ /*
+ * We allocate an array of struct page pointers. map_vm_area() wants
+ * this, rather than just an array of pages.
+ */
switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
GFP_KERNEL);
if (!switcher_page) {
@@ -56,8 +62,10 @@
goto out;
}
- /* Now we actually allocate the pages. The Guest will see these pages,
- * so we make sure they're zeroed. */
+ /*
+ * Now we actually allocate the pages. The Guest will see these pages,
+ * so we make sure they're zeroed.
+ */
for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
unsigned long addr = get_zeroed_page(GFP_KERNEL);
if (!addr) {
@@ -67,19 +75,23 @@
switcher_page[i] = virt_to_page(addr);
}
- /* First we check that the Switcher won't overlap the fixmap area at
+ /*
+ * First we check that the Switcher won't overlap the fixmap area at
* the top of memory. It's currently nowhere near, but it could have
- * very strange effects if it ever happened. */
+ * very strange effects if it ever happened.
+ */
if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
err = -ENOMEM;
printk("lguest: mapping switcher would thwack fixmap\n");
goto free_pages;
}
- /* Now we reserve the "virtual memory area" we want: 0xFFC00000
+ /*
+ * Now we reserve the "virtual memory area" we want: 0xFFC00000
* (SWITCHER_ADDR). We might not get it in theory, but in practice
* it's worked so far. The end address needs +1 because __get_vm_area
- * allocates an extra guard page, so we need space for that. */
+ * allocates an extra guard page, so we need space for that.
+ */
switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
+ (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
@@ -89,11 +101,13 @@
goto free_pages;
}
- /* This code actually sets up the pages we've allocated to appear at
+ /*
+ * This code actually sets up the pages we've allocated to appear at
* SWITCHER_ADDR. map_vm_area() takes the vma we allocated above, the
* kind of pages we're mapping (kernel pages), and a pointer to our
* array of struct pages. It increments that pointer, but we don't
- * care. */
+ * care.
+ */
pagep = switcher_page;
err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
if (err) {
@@ -101,8 +115,10 @@
goto free_vma;
}
- /* Now the Switcher is mapped at the right address, we can't fail!
- * Copy in the compiled-in Switcher code (from <arch>_switcher.S). */
+ /*
+ * Now the Switcher is mapped at the right address, we can't fail!
+ * Copy in the compiled-in Switcher code (from <arch>_switcher.S).
+ */
memcpy(switcher_vma->addr, start_switcher_text,
end_switcher_text - start_switcher_text);
@@ -124,8 +140,7 @@
}
/*:*/
-/* Cleaning up the mapping when the module is unloaded is almost...
- * too easy. */
+/* Cleaning up the mapping when the module is unloaded is almost... too easy. */
static void unmap_switcher(void)
{
unsigned int i;
@@ -151,16 +166,19 @@
* But we can't trust the Guest: it might be trying to access the Launcher
* code. We have to check that the range is below the pfn_limit the Launcher
* gave us. We have to make sure that addr + len doesn't give us a false
- * positive by overflowing, too. */
+ * positive by overflowing, too.
+ */
bool lguest_address_ok(const struct lguest *lg,
unsigned long addr, unsigned long len)
{
return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
}
-/* This routine copies memory from the Guest. Here we can see how useful the
+/*
+ * This routine copies memory from the Guest. Here we can see how useful the
* kill_lguest() routine we met in the Launcher can be: we return a random
- * value (all zeroes) instead of needing to return an error. */
+ * value (all zeroes) instead of needing to return an error.
+ */
void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
{
if (!lguest_address_ok(cpu->lg, addr, bytes)
@@ -181,9 +199,11 @@
}
/*:*/
-/*H:030 Let's jump straight to the the main loop which runs the Guest.
+/*H:030
+ * Let's jump straight to the the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
- * going around and around until something interesting happens. */
+ * going around and around until something interesting happens.
+ */
int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
{
/* We stop running once the Guest is dead. */
@@ -195,10 +215,17 @@
if (cpu->hcall)
do_hypercalls(cpu);
- /* It's possible the Guest did a NOTIFY hypercall to the
- * Launcher, in which case we return from the read() now. */
+ /*
+ * It's possible the Guest did a NOTIFY hypercall to the
+ * Launcher.
+ */
if (cpu->pending_notify) {
+ /*
+ * Does it just needs to write to a registered
+ * eventfd (ie. the appropriate virtqueue thread)?
+ */
if (!send_notify_to_eventfd(cpu)) {
+ /* OK, we tell the main Laucher. */
if (put_user(cpu->pending_notify, user))
return -EFAULT;
return sizeof(cpu->pending_notify);
@@ -209,29 +236,39 @@
if (signal_pending(current))
return -ERESTARTSYS;
- /* Check if there are any interrupts which can be delivered now:
+ /*
+ * Check if there are any interrupts which can be delivered now:
* if so, this sets up the hander to be executed when we next
- * run the Guest. */
+ * run the Guest.
+ */
irq = interrupt_pending(cpu, &more);
if (irq < LGUEST_IRQS)
try_deliver_interrupt(cpu, irq, more);
- /* All long-lived kernel loops need to check with this horrible
+ /*
+ * All long-lived kernel loops need to check with this horrible
* thing called the freezer. If the Host is trying to suspend,
- * it stops us. */
+ * it stops us.
+ */
try_to_freeze();
- /* Just make absolutely sure the Guest is still alive. One of
- * those hypercalls could have been fatal, for example. */
+ /*
+ * Just make absolutely sure the Guest is still alive. One of
+ * those hypercalls could have been fatal, for example.
+ */
if (cpu->lg->dead)
break;
- /* If the Guest asked to be stopped, we sleep. The Guest's
- * clock timer will wake us. */
+ /*
+ * If the Guest asked to be stopped, we sleep. The Guest's
+ * clock timer will wake us.
+ */
if (cpu->halted) {
set_current_state(TASK_INTERRUPTIBLE);
- /* Just before we sleep, make sure no interrupt snuck in
- * which we should be doing. */
+ /*
+ * Just before we sleep, make sure no interrupt snuck in
+ * which we should be doing.
+ */
if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
set_current_state(TASK_RUNNING);
else
@@ -239,8 +276,10 @@
continue;
}
- /* OK, now we're ready to jump into the Guest. First we put up
- * the "Do Not Disturb" sign: */
+ /*
+ * OK, now we're ready to jump into the Guest. First we put up
+ * the "Do Not Disturb" sign:
+ */
local_irq_disable();
/* Actually run the Guest until something happens. */
@@ -327,8 +366,10 @@
}
/*:*/
-/* The Host side of lguest can be a module. This is a nice way for people to
- * play with it. */
+/*
+ * The Host side of lguest can be a module. This is a nice way for people to
+ * play with it.
+ */
module_init(init);
module_exit(fini);
MODULE_LICENSE("GPL");
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index c29ffa1..83511eb 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -1,8 +1,10 @@
-/*P:500 Just as userspace programs request kernel operations through a system
+/*P:500
+ * Just as userspace programs request kernel operations through a system
* call, the Guest requests Host operations through a "hypercall". You might
* notice this nomenclature doesn't really follow any logic, but the name has
* been around for long enough that we're stuck with it. As you'd expect, this
- * code is basically a one big switch statement. :*/
+ * code is basically a one big switch statement.
+:*/
/* Copyright (C) 2006 Rusty Russell IBM Corporation
@@ -28,30 +30,41 @@
#include <asm/pgtable.h>
#include "lg.h"
-/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. */
+/*H:120
+ * This is the core hypercall routine: where the Guest gets what it wants.
+ * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both.
+ */
static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
case LHCALL_FLUSH_ASYNC:
- /* This call does nothing, except by breaking out of the Guest
- * it makes us process all the asynchronous hypercalls. */
+ /*
+ * This call does nothing, except by breaking out of the Guest
+ * it makes us process all the asynchronous hypercalls.
+ */
break;
case LHCALL_SEND_INTERRUPTS:
- /* This call does nothing too, but by breaking out of the Guest
- * it makes us process any pending interrupts. */
+ /*
+ * This call does nothing too, but by breaking out of the Guest
+ * it makes us process any pending interrupts.
+ */
break;
case LHCALL_LGUEST_INIT:
- /* You can't get here unless you're already initialized. Don't
- * do that. */
+ /*
+ * You can't get here unless you're already initialized. Don't
+ * do that.
+ */
kill_guest(cpu, "already have lguest_data");
break;
case LHCALL_SHUTDOWN: {
- /* Shutdown is such a trivial hypercall that we do it in four
- * lines right here. */
char msg[128];
- /* If the lgread fails, it will call kill_guest() itself; the
- * kill_guest() with the message will be ignored. */
+ /*
+ * Shutdown is such a trivial hypercall that we do it in five
+ * lines right here.
+ *
+ * If the lgread fails, it will call kill_guest() itself; the
+ * kill_guest() with the message will be ignored.
+ */
__lgread(cpu, msg, args->arg1, sizeof(msg));
msg[sizeof(msg)-1] = '\0';
kill_guest(cpu, "CRASH: %s", msg);
@@ -60,16 +73,17 @@
break;
}
case LHCALL_FLUSH_TLB:
- /* FLUSH_TLB comes in two flavors, depending on the
- * argument: */
+ /* FLUSH_TLB comes in two flavors, depending on the argument: */
if (args->arg1)
guest_pagetable_clear_all(cpu);
else
guest_pagetable_flush_user(cpu);
break;
- /* All these calls simply pass the arguments through to the right
- * routines. */
+ /*
+ * All these calls simply pass the arguments through to the right
+ * routines.
+ */
case LHCALL_NEW_PGTABLE:
guest_new_pagetable(cpu, args->arg1);
break;
@@ -112,15 +126,16 @@
kill_guest(cpu, "Bad hypercall %li\n", args->arg0);
}
}
-/*:*/
-/*H:124 Asynchronous hypercalls are easy: we just look in the array in the
+/*H:124
+ * Asynchronous hypercalls are easy: we just look in the array in the
* Guest's "struct lguest_data" to see if any new ones are marked "ready".
*
* We are careful to do these in order: obviously we respect the order the
* Guest put them in the ring, but we also promise the Guest that they will
* happen before any normal hypercall (which is why we check this before
- * checking for a normal hcall). */
+ * checking for a normal hcall).
+ */
static void do_async_hcalls(struct lg_cpu *cpu)
{
unsigned int i;
@@ -133,22 +148,28 @@
/* We process "struct lguest_data"s hcalls[] ring once. */
for (i = 0; i < ARRAY_SIZE(st); i++) {
struct hcall_args args;
- /* We remember where we were up to from last time. This makes
+ /*
+ * We remember where we were up to from last time. This makes
* sure that the hypercalls are done in the order the Guest
- * places them in the ring. */
+ * places them in the ring.
+ */
unsigned int n = cpu->next_hcall;
/* 0xFF means there's no call here (yet). */
if (st[n] == 0xFF)
break;
- /* OK, we have hypercall. Increment the "next_hcall" cursor,
- * and wrap back to 0 if we reach the end. */
+ /*
+ * OK, we have hypercall. Increment the "next_hcall" cursor,
+ * and wrap back to 0 if we reach the end.
+ */
if (++cpu->next_hcall == LHCALL_RING_SIZE)
cpu->next_hcall = 0;
- /* Copy the hypercall arguments into a local copy of
- * the hcall_args struct. */
+ /*
+ * Copy the hypercall arguments into a local copy of the
+ * hcall_args struct.
+ */
if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n],
sizeof(struct hcall_args))) {
kill_guest(cpu, "Fetching async hypercalls");
@@ -164,19 +185,25 @@
break;
}
- /* Stop doing hypercalls if they want to notify the Launcher:
- * it needs to service this first. */
+ /*
+ * Stop doing hypercalls if they want to notify the Launcher:
+ * it needs to service this first.
+ */
if (cpu->pending_notify)
break;
}
}
-/* Last of all, we look at what happens first of all. The very first time the
- * Guest makes a hypercall, we end up here to set things up: */
+/*
+ * Last of all, we look at what happens first of all. The very first time the
+ * Guest makes a hypercall, we end up here to set things up:
+ */
static void initialize(struct lg_cpu *cpu)
{
- /* You can't do anything until you're initialized. The Guest knows the
- * rules, so we're unforgiving here. */
+ /*
+ * You can't do anything until you're initialized. The Guest knows the
+ * rules, so we're unforgiving here.
+ */
if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) {
kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0);
return;
@@ -185,32 +212,44 @@
if (lguest_arch_init_hypercalls(cpu))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* The Guest tells us where we're not to deliver interrupts by putting
- * the range of addresses into "struct lguest_data". */
+ /*
+ * The Guest tells us where we're not to deliver interrupts by putting
+ * the range of addresses into "struct lguest_data".
+ */
if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start)
|| get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* We write the current time into the Guest's data page once so it can
- * set its clock. */
+ /*
+ * We write the current time into the Guest's data page once so it can
+ * set its clock.
+ */
write_timestamp(cpu);
/* page_tables.c will also do some setup. */
page_table_guest_data_init(cpu);
- /* This is the one case where the above accesses might have been the
+ /*
+ * This is the one case where the above accesses might have been the
* first write to a Guest page. This may have caused a copy-on-write
* fault, but the old page might be (read-only) in the Guest
- * pagetable. */
+ * pagetable.
+ */
guest_pagetable_clear_all(cpu);
}
/*:*/
-/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+/*M:013
+ * If a Guest reads from a page (so creates a mapping) that it has never
* written to, and then the Launcher writes to it (ie. the output of a virtual
* device), the Guest will still see the old page. In practice, this never
* happens: why would the Guest read a page which it has never written to? But
- * a similar scenario might one day bite us, so it's worth mentioning. :*/
+ * a similar scenario might one day bite us, so it's worth mentioning.
+ *
+ * Note that if we used a shared anonymous mapping in the Launcher instead of
+ * mapping /dev/zero private, we wouldn't worry about cop-on-write. And we
+ * need that to switch the Launcher to processes (away from threads) anyway.
+:*/
/*H:100
* Hypercalls
@@ -229,17 +268,22 @@
return;
}
- /* The Guest has initialized.
+ /*
+ * The Guest has initialized.
*
- * Look in the hypercall ring for the async hypercalls: */
+ * Look in the hypercall ring for the async hypercalls:
+ */
do_async_hcalls(cpu);
- /* If we stopped reading the hypercall ring because the Guest did a
+ /*
+ * If we stopped reading the hypercall ring because the Guest did a
* NOTIFY to the Launcher, we want to return now. Otherwise we do
- * the hypercall. */
+ * the hypercall.
+ */
if (!cpu->pending_notify) {
do_hcall(cpu, cpu->hcall);
- /* Tricky point: we reset the hcall pointer to mark the
+ /*
+ * Tricky point: we reset the hcall pointer to mark the
* hypercall as "done". We use the hcall pointer rather than
* the trap number to indicate a hypercall is pending.
* Normally it doesn't matter: the Guest will run again and
@@ -248,13 +292,16 @@
* However, if we are signalled or the Guest sends I/O to the
* Launcher, the run_guest() loop will exit without running the
* Guest. When it comes back it would try to re-run the
- * hypercall. Finding that bug sucked. */
+ * hypercall. Finding that bug sucked.
+ */
cpu->hcall = NULL;
}
}
-/* This routine supplies the Guest with time: it's used for wallclock time at
- * initial boot and as a rough time source if the TSC isn't available. */
+/*
+ * This routine supplies the Guest with time: it's used for wallclock time at
+ * initial boot and as a rough time source if the TSC isn't available.
+ */
void write_timestamp(struct lg_cpu *cpu)
{
struct timespec now;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0e9067b..1864818 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -1,4 +1,5 @@
-/*P:800 Interrupts (traps) are complicated enough to earn their own file.
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
* There are three classes of interrupts:
*
* 1) Real hardware interrupts which occur while we're running the Guest,
@@ -10,7 +11,8 @@
* just like real hardware would deliver them. Traps from the Guest can be set
* up to go directly back into the Guest, but sometimes the Host wants to see
* them first, so we also have a way of "reflecting" them into the Guest as if
- * they had been delivered to it directly. :*/
+ * they had been delivered to it directly.
+:*/
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/module.h>
@@ -26,8 +28,10 @@
return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
}
-/* The "type" of the interrupt handler is a 4 bit field: we only support a
- * couple of types. */
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
static int idt_type(u32 lo, u32 hi)
{
return (hi >> 8) & 0xF;
@@ -39,8 +43,10 @@
return (hi & 0x8000);
}
-/* We need a helper to "push" a value onto the Guest's stack, since that's a
- * big part of what delivering an interrupt does. */
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
{
/* Stack grows upwards: move stack then write value. */
@@ -48,7 +54,8 @@
lgwrite(cpu, *gstack, u32, val);
}
-/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
+/*H:210
+ * The set_guest_interrupt() routine actually delivers the interrupt or
* trap. The mechanics of delivering traps and interrupts to the Guest are the
* same, except some traps have an "error code" which gets pushed onto the
* stack as well: the caller tells us if this is one.
@@ -59,7 +66,8 @@
*
* We set up the stack just like the CPU does for a real interrupt, so it's
* identical for the Guest (and the standard "iret" instruction will undo
- * it). */
+ * it).
+ */
static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
bool has_err)
{
@@ -67,20 +75,26 @@
u32 eflags, ss, irq_enable;
unsigned long virtstack;
- /* There are two cases for interrupts: one where the Guest is already
+ /*
+ * There are two cases for interrupts: one where the Guest is already
* in the kernel, and a more complex one where the Guest is in
- * userspace. We check the privilege level to find out. */
+ * userspace. We check the privilege level to find out.
+ */
if ((cpu->regs->ss&0x3) != GUEST_PL) {
- /* The Guest told us their kernel stack with the SET_STACK
- * hypercall: both the virtual address and the segment */
+ /*
+ * The Guest told us their kernel stack with the SET_STACK
+ * hypercall: both the virtual address and the segment.
+ */
virtstack = cpu->esp1;
ss = cpu->ss1;
origstack = gstack = guest_pa(cpu, virtstack);
- /* We push the old stack segment and pointer onto the new
+ /*
+ * We push the old stack segment and pointer onto the new
* stack: when the Guest does an "iret" back from the interrupt
* handler the CPU will notice they're dropping privilege
- * levels and expect these here. */
+ * levels and expect these here.
+ */
push_guest_stack(cpu, &gstack, cpu->regs->ss);
push_guest_stack(cpu, &gstack, cpu->regs->esp);
} else {
@@ -91,18 +105,22 @@
origstack = gstack = guest_pa(cpu, virtstack);
}
- /* Remember that we never let the Guest actually disable interrupts, so
+ /*
+ * Remember that we never let the Guest actually disable interrupts, so
* the "Interrupt Flag" bit is always set. We copy that bit from the
* Guest's "irq_enabled" field into the eflags word: we saw the Guest
- * copy it back in "lguest_iret". */
+ * copy it back in "lguest_iret".
+ */
eflags = cpu->regs->eflags;
if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
&& !(irq_enable & X86_EFLAGS_IF))
eflags &= ~X86_EFLAGS_IF;
- /* An interrupt is expected to push three things on the stack: the old
+ /*
+ * An interrupt is expected to push three things on the stack: the old
* "eflags" word, the old code segment, and the old instruction
- * pointer. */
+ * pointer.
+ */
push_guest_stack(cpu, &gstack, eflags);
push_guest_stack(cpu, &gstack, cpu->regs->cs);
push_guest_stack(cpu, &gstack, cpu->regs->eip);
@@ -111,15 +129,19 @@
if (has_err)
push_guest_stack(cpu, &gstack, cpu->regs->errcode);
- /* Now we've pushed all the old state, we change the stack, the code
- * segment and the address to execute. */
+ /*
+ * Now we've pushed all the old state, we change the stack, the code
+ * segment and the address to execute.
+ */
cpu->regs->ss = ss;
cpu->regs->esp = virtstack + (gstack - origstack);
cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
cpu->regs->eip = idt_address(lo, hi);
- /* There are two kinds of interrupt handlers: 0xE is an "interrupt
- * gate" which expects interrupts to be disabled on entry. */
+ /*
+ * There are two kinds of interrupt handlers: 0xE is an "interrupt
+ * gate" which expects interrupts to be disabled on entry.
+ */
if (idt_type(lo, hi) == 0xE)
if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
kill_guest(cpu, "Disabling interrupts");
@@ -130,7 +152,8 @@
*
* interrupt_pending() returns the first pending interrupt which isn't blocked
* by the Guest. It is called before every entry to the Guest, and just before
- * we go to sleep when the Guest has halted itself. */
+ * we go to sleep when the Guest has halted itself.
+ */
unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
{
unsigned int irq;
@@ -140,8 +163,10 @@
if (!cpu->lg->lguest_data)
return LGUEST_IRQS;
- /* Take our "irqs_pending" array and remove any interrupts the Guest
- * wants blocked: the result ends up in "blk". */
+ /*
+ * Take our "irqs_pending" array and remove any interrupts the Guest
+ * wants blocked: the result ends up in "blk".
+ */
if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
sizeof(blk)))
return LGUEST_IRQS;
@@ -154,16 +179,20 @@
return irq;
}
-/* This actually diverts the Guest to running an interrupt handler, once an
- * interrupt has been identified by interrupt_pending(). */
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
{
struct desc_struct *idt;
BUG_ON(irq >= LGUEST_IRQS);
- /* They may be in the middle of an iret, where they asked us never to
- * deliver interrupts. */
+ /*
+ * They may be in the middle of an iret, where they asked us never to
+ * deliver interrupts.
+ */
if (cpu->regs->eip >= cpu->lg->noirq_start &&
(cpu->regs->eip < cpu->lg->noirq_end))
return;
@@ -187,29 +216,37 @@
}
}
- /* Look at the IDT entry the Guest gave us for this interrupt. The
+ /*
+ * Look at the IDT entry the Guest gave us for this interrupt. The
* first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
- * over them. */
+ * over them.
+ */
idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
/* If they don't have a handler (yet?), we just ignore it */
if (idt_present(idt->a, idt->b)) {
/* OK, mark it no longer pending and deliver it. */
clear_bit(irq, cpu->irqs_pending);
- /* set_guest_interrupt() takes the interrupt descriptor and a
+ /*
+ * set_guest_interrupt() takes the interrupt descriptor and a
* flag to say whether this interrupt pushes an error code onto
- * the stack as well: virtual interrupts never do. */
+ * the stack as well: virtual interrupts never do.
+ */
set_guest_interrupt(cpu, idt->a, idt->b, false);
}
- /* Every time we deliver an interrupt, we update the timestamp in the
+ /*
+ * Every time we deliver an interrupt, we update the timestamp in the
* Guest's lguest_data struct. It would be better for the Guest if we
* did this more often, but it can actually be quite slow: doing it
* here is a compromise which means at least it gets updated every
- * timer interrupt. */
+ * timer interrupt.
+ */
write_timestamp(cpu);
- /* If there are no other interrupts we want to deliver, clear
- * the pending flag. */
+ /*
+ * If there are no other interrupts we want to deliver, clear
+ * the pending flag.
+ */
if (!more)
put_user(0, &cpu->lg->lguest_data->irq_pending);
}
@@ -217,24 +254,29 @@
/* And this is the routine when we want to set an interrupt for the Guest. */
void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
{
- /* Next time the Guest runs, the core code will see if it can deliver
- * this interrupt. */
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
set_bit(irq, cpu->irqs_pending);
- /* Make sure it sees it; it might be asleep (eg. halted), or
- * running the Guest right now, in which case kick_process()
- * will knock it out. */
+ /*
+ * Make sure it sees it; it might be asleep (eg. halted), or running
+ * the Guest right now, in which case kick_process() will knock it out.
+ */
if (!wake_up_process(cpu->tsk))
kick_process(cpu->tsk);
}
/*:*/
-/* Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
+/*
+ * Linux uses trap 128 for system calls. Plan9 uses 64, and Ron Minnich sent
* me a patch, so we support that too. It'd be a big step for lguest if half
* the Plan 9 user base were to start using it.
*
* Actually now I think of it, it's possible that Ron *is* half the Plan 9
- * userbase. Oh well. */
+ * userbase. Oh well.
+ */
static bool could_be_syscall(unsigned int num)
{
/* Normal Linux SYSCALL_VECTOR or reserved vector? */
@@ -274,9 +316,11 @@
clear_bit(syscall_vector, used_vectors);
}
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
* page fault is easy. The only trick is that Intel decided that some traps
- * should have error codes: */
+ * should have error codes:
+ */
static bool has_err(unsigned int trap)
{
return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
@@ -285,13 +329,17 @@
/* deliver_trap() returns true if it could deliver the trap. */
bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
{
- /* Trap numbers are always 8 bit, but we set an impossible trap number
- * for traps inside the Switcher, so check that here. */
+ /*
+ * Trap numbers are always 8 bit, but we set an impossible trap number
+ * for traps inside the Switcher, so check that here.
+ */
if (num >= ARRAY_SIZE(cpu->arch.idt))
return false;
- /* Early on the Guest hasn't set the IDT entries (or maybe it put a
- * bogus one in): if we fail here, the Guest will be killed. */
+ /*
+ * Early on the Guest hasn't set the IDT entries (or maybe it put a
+ * bogus one in): if we fail here, the Guest will be killed.
+ */
if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
return false;
set_guest_interrupt(cpu, cpu->arch.idt[num].a,
@@ -299,7 +347,8 @@
return true;
}
-/*H:250 Here's the hard part: returning to the Host every time a trap happens
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
* and then calling deliver_trap() and re-entering the Guest is slow.
* Particularly because Guest userspace system calls are traps (usually trap
* 128).
@@ -311,69 +360,87 @@
* the other hypervisors would beat it up at lunchtime.
*
* This routine indicates if a particular trap number could be delivered
- * directly. */
+ * directly.
+ */
static bool direct_trap(unsigned int num)
{
- /* Hardware interrupts don't go to the Guest at all (except system
- * call). */
+ /*
+ * Hardware interrupts don't go to the Guest at all (except system
+ * call).
+ */
if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
return false;
- /* The Host needs to see page faults (for shadow paging and to save the
+ /*
+ * The Host needs to see page faults (for shadow paging and to save the
* fault address), general protection faults (in/out emulation) and
* device not available (TS handling), invalid opcode fault (kvm hcall),
- * and of course, the hypercall trap. */
+ * and of course, the hypercall trap.
+ */
return num != 14 && num != 13 && num != 7 &&
num != 6 && num != LGUEST_TRAP_ENTRY;
}
/*:*/
-/*M:005 The Guest has the ability to turn its interrupt gates into trap gates,
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
* if it is careful. The Host will let trap gates can go directly to the
* Guest, but the Guest needs the interrupts atomically disabled for an
* interrupt gate. It can do this by pointing the trap gate at instructions
- * within noirq_start and noirq_end, where it can safely disable interrupts. */
+ * within noirq_start and noirq_end, where it can safely disable interrupts.
+ */
-/*M:006 The Guests do not use the sysenter (fast system call) instruction,
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
* because it's hardcoded to enter privilege level 0 and so can't go direct.
* It's about twice as fast as the older "int 0x80" system call, so it might
* still be worthwhile to handle it in the Switcher and lcall down to the
* Guest. The sysenter semantics are hairy tho: search for that keyword in
- * entry.S :*/
+ * entry.S
+:*/
-/*H:260 When we make traps go directly into the Guest, we need to make sure
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
* the kernel stack is valid (ie. mapped in the page tables). Otherwise, the
* CPU trying to deliver the trap will fault while trying to push the interrupt
* words on the stack: this is called a double fault, and it forces us to kill
* the Guest.
*
- * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
void pin_stack_pages(struct lg_cpu *cpu)
{
unsigned int i;
- /* Depending on the CONFIG_4KSTACKS option, the Guest can have one or
- * two pages of stack space. */
+ /*
+ * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+ * two pages of stack space.
+ */
for (i = 0; i < cpu->lg->stack_pages; i++)
- /* The stack grows *upwards*, so the address we're given is the
+ /*
+ * The stack grows *upwards*, so the address we're given is the
* start of the page after the kernel stack. Subtract one to
* get back onto the first stack page, and keep subtracting to
- * get to the rest of the stack pages. */
+ * get to the rest of the stack pages.
+ */
pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
}
-/* Direct traps also mean that we need to know whenever the Guest wants to use
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
* a different kernel stack, so we can change the IDT entries to use that
* stack. The IDT entries expect a virtual address, so unlike most addresses
* the Guest gives us, the "esp" (stack pointer) value here is virtual, not
* physical.
*
* In Linux each process has its own kernel stack, so this happens a lot: we
- * change stacks on each context switch. */
+ * change stacks on each context switch.
+ */
void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
{
- /* You are not allowed have a stack segment with privilege level 0: bad
- * Guest! */
+ /*
+ * You're not allowed a stack segment with privilege level 0: bad Guest!
+ */
if ((seg & 0x3) != GUEST_PL)
kill_guest(cpu, "bad stack segment %i", seg);
/* We only expect one or two stack pages. */
@@ -387,11 +454,15 @@
pin_stack_pages(cpu);
}
-/* All this reference to mapping stacks leads us neatly into the other complex
- * part of the Host: page table handling. */
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
-/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into the entry in "struct lguest": */
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
unsigned int num, u32 lo, u32 hi)
{
@@ -407,30 +478,38 @@
if (type != 0xE && type != 0xF)
kill_guest(cpu, "bad IDT type %i", type);
- /* We only copy the handler address, present bit, privilege level and
+ /*
+ * We only copy the handler address, present bit, privilege level and
* type. The privilege level controls where the trap can be triggered
* manually with an "int" instruction. This is usually GUEST_PL,
- * except for system calls which userspace can use. */
+ * except for system calls which userspace can use.
+ */
trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
trap->b = (hi&0xFFFFEF00);
}
-/*H:230 While we're here, dealing with delivering traps and interrupts to the
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
* Guest, we might as well complete the picture: how the Guest tells us where
* it wants them to go. This would be simple, except making traps fast
* requires some tricks.
*
* We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
- * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
{
- /* Guest never handles: NMI, doublefault, spurious interrupt or
- * hypercall. We ignore when it tries to set them. */
+ /*
+ * Guest never handles: NMI, doublefault, spurious interrupt or
+ * hypercall. We ignore when it tries to set them.
+ */
if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
return;
- /* Mark the IDT as changed: next time the Guest runs we'll know we have
- * to copy this again. */
+ /*
+ * Mark the IDT as changed: next time the Guest runs we'll know we have
+ * to copy this again.
+ */
cpu->changed |= CHANGED_IDT;
/* Check that the Guest doesn't try to step outside the bounds. */
@@ -440,9 +519,11 @@
set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
}
-/* The default entry for each interrupt points into the Switcher routines which
+/*
+ * The default entry for each interrupt points into the Switcher routines which
* simply return to the Host. The run_guest() loop will then call
- * deliver_trap() to bounce it back into the Guest. */
+ * deliver_trap() to bounce it back into the Guest.
+ */
static void default_idt_entry(struct desc_struct *idt,
int trap,
const unsigned long handler,
@@ -451,13 +532,17 @@
/* A present interrupt gate. */
u32 flags = 0x8e00;
- /* Set the privilege level on the entry for the hypercall: this allows
- * the Guest to use the "int" instruction to trigger it. */
+ /*
+ * Set the privilege level on the entry for the hypercall: this allows
+ * the Guest to use the "int" instruction to trigger it.
+ */
if (trap == LGUEST_TRAP_ENTRY)
flags |= (GUEST_PL << 13);
else if (base)
- /* Copy priv. level from what Guest asked for. This allows
- * debug (int 3) traps from Guest userspace, for example. */
+ /*
+ * Copy privilege level from what Guest asked for. This allows
+ * debug (int 3) traps from Guest userspace, for example.
+ */
flags |= (base->b & 0x6000);
/* Now pack it into the IDT entry in its weird format. */
@@ -475,16 +560,20 @@
default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
}
-/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
* we copy them into the IDT which we've set up for Guests on this CPU, just
- * before we run the Guest. This routine does that copy. */
+ * before we run the Guest. This routine does that copy.
+ */
void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
const unsigned long *def)
{
unsigned int i;
- /* We can simply copy the direct traps, otherwise we use the default
- * ones in the Switcher: they will return to the Host. */
+ /*
+ * We can simply copy the direct traps, otherwise we use the default
+ * ones in the Switcher: they will return to the Host.
+ */
for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
const struct desc_struct *gidt = &cpu->arch.idt[i];
@@ -492,14 +581,16 @@
if (!direct_trap(i))
continue;
- /* Only trap gates (type 15) can go direct to the Guest.
+ /*
+ * Only trap gates (type 15) can go direct to the Guest.
* Interrupt gates (type 14) disable interrupts as they are
* entered, which we never let the Guest do. Not present
* entries (type 0x0) also can't go direct, of course.
*
* If it can't go direct, we still need to copy the priv. level:
* they might want to give userspace access to a software
- * interrupt. */
+ * interrupt.
+ */
if (idt_type(gidt->a, gidt->b) == 0xF)
idt[i] = *gidt;
else
@@ -518,7 +609,8 @@
* the next timer interrupt (in nanoseconds). We use the high-resolution timer
* infrastructure to set a callback at that time.
*
- * 0 means "turn off the clock". */
+ * 0 means "turn off the clock".
+ */
void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
{
ktime_t expires;
@@ -529,9 +621,11 @@
return;
}
- /* We use wallclock time here, so the Guest might not be running for
+ /*
+ * We use wallclock time here, so the Guest might not be running for
* all the time between now and the timer interrupt it asked for. This
- * is almost always the right thing to do. */
+ * is almost always the right thing to do.
+ */
expires = ktime_add_ns(ktime_get_real(), delta);
hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
}
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index d4e8979..bc28745 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -16,15 +16,13 @@
void free_pagetables(void);
int init_pagetables(struct page **switcher_page, unsigned int pages);
-struct pgdir
-{
+struct pgdir {
unsigned long gpgdir;
pgd_t *pgdir;
};
/* We have two pages shared with guests, per cpu. */
-struct lguest_pages
-{
+struct lguest_pages {
/* This is the stack page mapped rw in guest */
char spare[PAGE_SIZE - sizeof(struct lguest_regs)];
struct lguest_regs regs;
@@ -38,8 +36,6 @@
#define CHANGED_GDT_TLS 4 /* Actually a subset of CHANGED_GDT */
#define CHANGED_ALL 3
-struct lguest;
-
struct lg_cpu {
unsigned int id;
struct lguest *lg;
@@ -56,13 +52,13 @@
unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
- /* At end of a page shared mapped over lguest_pages in guest. */
+ /* At end of a page shared mapped over lguest_pages in guest. */
unsigned long regs_page;
struct lguest_regs *regs;
struct lguest_pages *last_pages;
- int cpu_pgd; /* which pgd this cpu is currently using */
+ int cpu_pgd; /* Which pgd this cpu is currently using */
/* If a hypercall was asked for, this points to the arguments. */
struct hcall_args *hcall;
@@ -82,7 +78,7 @@
struct lg_eventfd {
unsigned long addr;
- struct file *event;
+ struct eventfd_ctx *event;
};
struct lg_eventfd_map {
@@ -91,15 +87,17 @@
};
/* The private info the thread maintains about the guest. */
-struct lguest
-{
+struct lguest {
struct lguest_data __user *lguest_data;
struct lg_cpu cpus[NR_CPUS];
unsigned int nr_cpus;
u32 pfn_limit;
- /* This provides the offset to the base of guest-physical
- * memory in the Launcher. */
+
+ /*
+ * This provides the offset to the base of guest-physical memory in the
+ * Launcher.
+ */
void __user *mem_base;
unsigned long kernel_address;
@@ -124,11 +122,13 @@
void __lgread(struct lg_cpu *, void *, unsigned long, unsigned);
void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
-/*H:035 Using memory-copy operations like that is usually inconvient, so we
+/*H:035
+ * Using memory-copy operations like that is usually inconvient, so we
* have the following helper macros which read and write a specific type (often
* an unsigned long).
*
- * This reads into a variable of the given type then returns that. */
+ * This reads into a variable of the given type then returns that.
+ */
#define lgread(cpu, addr, type) \
({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; })
@@ -142,9 +142,11 @@
int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
-/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
+/*
+ * Helper macros to obtain the first 12 or the last 20 bits, this is only the
* first step in the migration to the kernel types. pte_pfn is already defined
- * in the kernel. */
+ * in the kernel.
+ */
#define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK)
#define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT)
#define pmd_flags(x) (pmd_val(x) & ~PAGE_MASK)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index e082cda..b6200bc 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,12 @@
-/*P:050 Lguest guests use a very simple method to describe devices. It's a
+/*P:050
+ * Lguest guests use a very simple method to describe devices. It's a
* series of device descriptors contained just above the top of normal Guest
* memory.
*
* We use the standard "virtio" device infrastructure, which provides us with a
* console, a network and a block driver. Each one expects some configuration
- * information and a "virtqueue" or two to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data.
+:*/
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/lguest_launcher.h>
@@ -20,8 +22,10 @@
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* For Guests, device memory can be used as normal memory, so we cast away the
- * __iomem to quieten sparse. */
+/*
+ * For Guests, device memory can be used as normal memory, so we cast away the
+ * __iomem to quieten sparse.
+ */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
@@ -32,8 +36,10 @@
iounmap((__force void __iomem *)addr);
}
-/*D:100 Each lguest device is just a virtio device plus a pointer to its entry
- * in the lguest_devices page. */
+/*D:100
+ * Each lguest device is just a virtio device plus a pointer to its entry
+ * in the lguest_devices page.
+ */
struct lguest_device {
struct virtio_device vdev;
@@ -41,9 +47,11 @@
struct lguest_device_desc *desc;
};
-/* Since the virtio infrastructure hands us a pointer to the virtio_device all
+/*
+ * Since the virtio infrastructure hands us a pointer to the virtio_device all
* the time, it helps to have a curt macro to get a pointer to the struct
- * lguest_device it's enclosed in. */
+ * lguest_device it's enclosed in.
+ */
#define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
/*D:130
@@ -55,7 +63,8 @@
* the driver will look at them during setup.
*
* A convenient routine to return the device's virtqueue config array:
- * immediately after the descriptor. */
+ * immediately after the descriptor.
+ */
static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
{
return (void *)(desc + 1);
@@ -98,10 +107,12 @@
return features;
}
-/* The virtio core takes the features the Host offers, and copies the
- * ones supported by the driver into the vdev->features array. Once
- * that's all sorted out, this routine is called so we can tell the
- * Host which features we understand and accept. */
+/*
+ * The virtio core takes the features the Host offers, and copies the ones
+ * supported by the driver into the vdev->features array. Once that's all
+ * sorted out, this routine is called so we can tell the Host which features we
+ * understand and accept.
+ */
static void lg_finalize_features(struct virtio_device *vdev)
{
unsigned int i, bits;
@@ -112,10 +123,11 @@
/* Give virtio_ring a chance to accept features. */
vring_transport_features(vdev);
- /* The vdev->feature array is a Linux bitmask: this isn't the
- * same as a the simple array of bits used by lguest devices
- * for features. So we do this slow, manual conversion which is
- * completely general. */
+ /*
+ * The vdev->feature array is a Linux bitmask: this isn't the same as a
+ * the simple array of bits used by lguest devices for features. So we
+ * do this slow, manual conversion which is completely general.
+ */
memset(out_features, 0, desc->feature_len);
bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
for (i = 0; i < bits; i++) {
@@ -146,15 +158,19 @@
memcpy(lg_config(desc) + offset, buf, len);
}
-/* The operations to get and set the status word just access the status field
- * of the device descriptor. */
+/*
+ * The operations to get and set the status word just access the status field
+ * of the device descriptor.
+ */
static u8 lg_get_status(struct virtio_device *vdev)
{
return to_lgdev(vdev)->desc->status;
}
-/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
- * descriptor address of the device. A zero status means "reset". */
+/*
+ * To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device. A zero status means "reset".
+ */
static void set_status(struct virtio_device *vdev, u8 status)
{
unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
@@ -191,8 +207,7 @@
*/
/*D:140 This is the information we remember about each virtqueue. */
-struct lguest_vq_info
-{
+struct lguest_vq_info {
/* A copy of the information contained in the device config. */
struct lguest_vqconfig config;
@@ -200,13 +215,17 @@
void *pages;
};
-/* When the virtio_ring code wants to prod the Host, it calls us here and we
+/*
+ * When the virtio_ring code wants to prod the Host, it calls us here and we
* make a hypercall. We hand the physical address of the virtqueue so the Host
- * knows which virtqueue we're talking about. */
+ * knows which virtqueue we're talking about.
+ */
static void lg_notify(struct virtqueue *vq)
{
- /* We store our virtqueue information in the "priv" pointer of the
- * virtqueue structure. */
+ /*
+ * We store our virtqueue information in the "priv" pointer of the
+ * virtqueue structure.
+ */
struct lguest_vq_info *lvq = vq->priv;
kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
@@ -215,7 +234,8 @@
/* An extern declaration inside a C file is bad form. Don't do it. */
extern void lguest_setup_irq(unsigned int irq);
-/* This routine finds the first virtqueue described in the configuration of
+/*
+ * This routine finds the Nth virtqueue described in the configuration of
* this device and sets it up.
*
* This is kind of an ugly duckling. It'd be nicer to have a standard
@@ -223,9 +243,7 @@
* everyone wants to do it differently. The KVM coders want the Guest to
* allocate its own pages and tell the Host where they are, but for lguest it's
* simpler for the Host to simply tell us where the pages are.
- *
- * So we provide drivers with a "find the Nth virtqueue and set it up"
- * function. */
+ */
static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
unsigned index,
void (*callback)(struct virtqueue *vq),
@@ -244,9 +262,11 @@
if (!lvq)
return ERR_PTR(-ENOMEM);
- /* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+ /*
+ * Make a copy of the "struct lguest_vqconfig" entry, which sits after
* the descriptor. We need a copy because the config space might not
- * be aligned correctly. */
+ * be aligned correctly.
+ */
memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
printk("Mapping virtqueue %i addr %lx\n", index,
@@ -261,8 +281,10 @@
goto free_lvq;
}
- /* OK, tell virtio_ring.c to set up a virtqueue now we know its size
- * and we've got a pointer to its pages. */
+ /*
+ * OK, tell virtio_ring.c to set up a virtqueue now we know its size
+ * and we've got a pointer to its pages.
+ */
vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
vdev, lvq->pages, lg_notify, callback, name);
if (!vq) {
@@ -273,18 +295,23 @@
/* Make sure the interrupt is allocated. */
lguest_setup_irq(lvq->config.irq);
- /* Tell the interrupt for this virtqueue to go to the virtio_ring
- * interrupt handler. */
- /* FIXME: We used to have a flag for the Host to tell us we could use
+ /*
+ * Tell the interrupt for this virtqueue to go to the virtio_ring
+ * interrupt handler.
+ *
+ * FIXME: We used to have a flag for the Host to tell us we could use
* the interrupt as a source of randomness: it'd be nice to have that
- * back.. */
+ * back.
+ */
err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED,
dev_name(&vdev->dev), vq);
if (err)
goto destroy_vring;
- /* Last of all we hook up our 'struct lguest_vq_info" to the
- * virtqueue's priv pointer. */
+ /*
+ * Last of all we hook up our 'struct lguest_vq_info" to the
+ * virtqueue's priv pointer.
+ */
vq->priv = lvq;
return vq;
@@ -358,11 +385,14 @@
.del_vqs = lg_del_vqs,
};
-/* The root device for the lguest virtio devices. This makes them appear as
- * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */
+/*
+ * The root device for the lguest virtio devices. This makes them appear as
+ * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2.
+ */
static struct device *lguest_root;
-/*D:120 This is the core of the lguest bus: actually adding a new device.
+/*D:120
+ * This is the core of the lguest bus: actually adding a new device.
* It's a separate function because it's neater that way, and because an
* earlier version of the code supported hotplug and unplug. They were removed
* early on because they were never used.
@@ -371,14 +401,14 @@
*
* It's worth reading this carefully: we start with a pointer to the new device
* descriptor in the "lguest_devices" page, and the offset into the device
- * descriptor page so we can uniquely identify it if things go badly wrong. */
+ * descriptor page so we can uniquely identify it if things go badly wrong.
+ */
static void add_lguest_device(struct lguest_device_desc *d,
unsigned int offset)
{
struct lguest_device *ldev;
- /* Start with zeroed memory; Linux's device layer seems to count on
- * it. */
+ /* Start with zeroed memory; Linux's device layer counts on it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
@@ -388,17 +418,25 @@
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = lguest_root;
- /* We have a unique device index thanks to the dev_index counter. */
+ /*
+ * The device type comes straight from the descriptor. There's also a
+ * device vendor field in the virtio_device struct, which we leave as
+ * 0.
+ */
ldev->vdev.id.device = d->type;
- /* We have a simple set of routines for querying the device's
- * configuration information and setting its status. */
+ /*
+ * We have a simple set of routines for querying the device's
+ * configuration information and setting its status.
+ */
ldev->vdev.config = &lguest_config_ops;
/* And we remember the device's descriptor for lguest_config_ops. */
ldev->desc = d;
- /* register_virtio_device() sets up the generic fields for the struct
+ /*
+ * register_virtio_device() sets up the generic fields for the struct
* virtio_device and calls device_register(). This makes the bus
- * infrastructure look for a matching driver. */
+ * infrastructure look for a matching driver.
+ */
if (register_virtio_device(&ldev->vdev) != 0) {
printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
offset, d->type);
@@ -406,8 +444,10 @@
}
}
-/*D:110 scan_devices() simply iterates through the device page. The type 0 is
- * reserved to mean "end of devices". */
+/*D:110
+ * scan_devices() simply iterates through the device page. The type 0 is
+ * reserved to mean "end of devices".
+ */
static void scan_devices(void)
{
unsigned int i;
@@ -426,7 +466,8 @@
}
}
-/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the
+/*D:105
+ * Fairly early in boot, lguest_devices_init() is called to set up the
* lguest device infrastructure. We check that we are a Guest by checking
* pv_info.name: there are other ways of checking, but this seems most
* obvious to me.
@@ -437,7 +478,8 @@
* correct sysfs incantation).
*
* Finally we call scan_devices() which adds all the devices found in the
- * lguest_devices page. */
+ * lguest_devices page.
+ */
static int __init lguest_devices_init(void)
{
if (strcmp(pv_info.name, "lguest") != 0)
@@ -456,11 +498,13 @@
/* We do this after core stuff, but before the drivers. */
postcore_initcall(lguest_devices_init);
-/*D:150 At this point in the journey we used to now wade through the lguest
+/*D:150
+ * At this point in the journey we used to now wade through the lguest
* devices themselves: net, block and console. Since they're all now virtio
* devices rather than lguest-specific, I've decided to ignore them. Mostly,
* they're kind of boring. But this does mean you'll never experience the
* thrill of reading the forbidden love scene buried deep in the block driver.
*
* "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?". */
+ * come from?", and "What do you do when someone asks for optimization?".
+ */
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 32e2971..b4d3f7c 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -1,8 +1,9 @@
/*P:200 This contains all the /dev/lguest code, whereby the userspace launcher
* controls and communicates with the Guest. For example, the first write will
- * tell us the Guest's memory layout, pagetable, entry point and kernel address
- * offset. A read will run the Guest until something happens, such as a signal
- * or the Guest doing a NOTIFY out to the Launcher. :*/
+ * tell us the Guest's memory layout and entry point. A read will run the
+ * Guest until something happens, such as a signal or the Guest doing a NOTIFY
+ * out to the Launcher.
+:*/
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
@@ -11,14 +12,41 @@
#include <linux/file.h>
#include "lg.h"
+/*L:056
+ * Before we move on, let's jump ahead and look at what the kernel does when
+ * it needs to look up the eventfds. That will complete our picture of how we
+ * use RCU.
+ *
+ * The notification value is in cpu->pending_notify: we return true if it went
+ * to an eventfd.
+ */
bool send_notify_to_eventfd(struct lg_cpu *cpu)
{
unsigned int i;
struct lg_eventfd_map *map;
- /* lg->eventfds is RCU-protected */
+ /*
+ * This "rcu_read_lock()" helps track when someone is still looking at
+ * the (RCU-using) eventfds array. It's not actually a lock at all;
+ * indeed it's a noop in many configurations. (You didn't expect me to
+ * explain all the RCU secrets here, did you?)
+ */
rcu_read_lock();
+ /*
+ * rcu_dereference is the counter-side of rcu_assign_pointer(); it
+ * makes sure we don't access the memory pointed to by
+ * cpu->lg->eventfds before cpu->lg->eventfds is set. Sounds crazy,
+ * but Alpha allows this! Paul McKenney points out that a really
+ * aggressive compiler could have the same effect:
+ * http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html
+ *
+ * So play safe, use rcu_dereference to get the rcu-protected pointer:
+ */
map = rcu_dereference(cpu->lg->eventfds);
+ /*
+ * Simple array search: even if they add an eventfd while we do this,
+ * we'll continue to use the old array and just won't see the new one.
+ */
for (i = 0; i < map->num; i++) {
if (map->map[i].addr == cpu->pending_notify) {
eventfd_signal(map->map[i].event, 1);
@@ -26,19 +54,50 @@
break;
}
}
+ /* We're done with the rcu-protected variable cpu->lg->eventfds. */
rcu_read_unlock();
+
+ /* If we cleared the notification, it's because we found a match. */
return cpu->pending_notify == 0;
}
+/*L:055
+ * One of the more tricksy tricks in the Linux Kernel is a technique called
+ * Read Copy Update. Since one point of lguest is to teach lguest journeyers
+ * about kernel coding, I use it here. (In case you're curious, other purposes
+ * include learning about virtualization and instilling a deep appreciation for
+ * simplicity and puppies).
+ *
+ * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we
+ * add new eventfds without ever blocking readers from accessing the array.
+ * The current Launcher only does this during boot, so that never happens. But
+ * Read Copy Update is cool, and adding a lock risks damaging even more puppies
+ * than this code does.
+ *
+ * We allocate a brand new one-larger array, copy the old one and add our new
+ * element. Then we make the lg eventfd pointer point to the new array.
+ * That's the easy part: now we need to free the old one, but we need to make
+ * sure no slow CPU somewhere is still looking at it. That's what
+ * synchronize_rcu does for us: waits until every CPU has indicated that it has
+ * moved on to know it's no longer using the old one.
+ *
+ * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update.
+ */
static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
{
struct lg_eventfd_map *new, *old = lg->eventfds;
+ /*
+ * We don't allow notifications on value 0 anyway (pending_notify of
+ * 0 means "nothing pending").
+ */
if (!addr)
return -EINVAL;
- /* Replace the old array with the new one, carefully: others can
- * be accessing it at the same time */
+ /*
+ * Replace the old array with the new one, carefully: others can
+ * be accessing it at the same time.
+ */
new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
GFP_KERNEL);
if (!new)
@@ -50,24 +109,43 @@
/* Now append new entry. */
new->map[new->num].addr = addr;
- new->map[new->num].event = eventfd_fget(fd);
+ new->map[new->num].event = eventfd_ctx_fdget(fd);
if (IS_ERR(new->map[new->num].event)) {
+ int err = PTR_ERR(new->map[new->num].event);
kfree(new);
- return PTR_ERR(new->map[new->num].event);
+ return err;
}
new->num++;
- /* Now put new one in place. */
+ /*
+ * Now put new one in place: rcu_assign_pointer() is a fancy way of
+ * doing "lg->eventfds = new", but it uses memory barriers to make
+ * absolutely sure that the contents of "new" written above is nailed
+ * down before we actually do the assignment.
+ *
+ * We have to think about these kinds of things when we're operating on
+ * live data without locks.
+ */
rcu_assign_pointer(lg->eventfds, new);
- /* We're not in a big hurry. Wait until noone's looking at old
- * version, then delete it. */
+ /*
+ * We're not in a big hurry. Wait until noone's looking at old
+ * version, then free it.
+ */
synchronize_rcu();
kfree(old);
return 0;
}
+/*L:052
+ * Receiving notifications from the Guest is usually done by attaching a
+ * particular LHCALL_NOTIFY value to an event filedescriptor. The eventfd will
+ * become readable when the Guest does an LHCALL_NOTIFY with that value.
+ *
+ * This is really convenient for processing each virtqueue in a separate
+ * thread.
+ */
static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
{
unsigned long addr, fd;
@@ -79,15 +157,22 @@
if (get_user(fd, input) != 0)
return -EFAULT;
+ /*
+ * Just make sure two callers don't add eventfds at once. We really
+ * only need to lock against callers adding to the same Guest, so using
+ * the Big Lguest Lock is overkill. But this is setup, not a fast path.
+ */
mutex_lock(&lguest_lock);
err = add_eventfd(lg, addr, fd);
mutex_unlock(&lguest_lock);
- return 0;
+ return err;
}
-/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
- * number to /dev/lguest. */
+/*L:050
+ * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
+ * number to /dev/lguest.
+ */
static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
{
unsigned long irq;
@@ -97,12 +182,18 @@
if (irq >= LGUEST_IRQS)
return -EINVAL;
+ /*
+ * Next time the Guest runs, the core code will see if it can deliver
+ * this interrupt.
+ */
set_interrupt(cpu, irq);
return 0;
}
-/*L:040 Once our Guest is initialized, the Launcher makes it run by reading
- * from /dev/lguest. */
+/*L:040
+ * Once our Guest is initialized, the Launcher makes it run by reading
+ * from /dev/lguest.
+ */
static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
{
struct lguest *lg = file->private_data;
@@ -138,8 +229,10 @@
return len;
}
- /* If we returned from read() last time because the Guest sent I/O,
- * clear the flag. */
+ /*
+ * If we returned from read() last time because the Guest sent I/O,
+ * clear the flag.
+ */
if (cpu->pending_notify)
cpu->pending_notify = 0;
@@ -147,8 +240,10 @@
return run_guest(cpu, (unsigned long __user *)user);
}
-/*L:025 This actually initializes a CPU. For the moment, a Guest is only
- * uniprocessor, so "id" is always 0. */
+/*L:025
+ * This actually initializes a CPU. For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0.
+ */
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
/* We have a limited number the number of CPUs in the lguest struct. */
@@ -163,8 +258,10 @@
/* Each CPU has a timer it can set. */
init_clockdev(cpu);
- /* We need a complete page for the Guest registers: they are accessible
- * to the Guest and we can only grant it access to whole pages. */
+ /*
+ * We need a complete page for the Guest registers: they are accessible
+ * to the Guest and we can only grant it access to whole pages.
+ */
cpu->regs_page = get_zeroed_page(GFP_KERNEL);
if (!cpu->regs_page)
return -ENOMEM;
@@ -172,29 +269,38 @@
/* We actually put the registers at the bottom of the page. */
cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs);
- /* Now we initialize the Guest's registers, handing it the start
- * address. */
+ /*
+ * Now we initialize the Guest's registers, handing it the start
+ * address.
+ */
lguest_arch_setup_regs(cpu, start_ip);
- /* We keep a pointer to the Launcher task (ie. current task) for when
- * other Guests want to wake this one (eg. console input). */
+ /*
+ * We keep a pointer to the Launcher task (ie. current task) for when
+ * other Guests want to wake this one (eg. console input).
+ */
cpu->tsk = current;
- /* We need to keep a pointer to the Launcher's memory map, because if
+ /*
+ * We need to keep a pointer to the Launcher's memory map, because if
* the Launcher dies we need to clean it up. If we don't keep a
- * reference, it is destroyed before close() is called. */
+ * reference, it is destroyed before close() is called.
+ */
cpu->mm = get_task_mm(cpu->tsk);
- /* We remember which CPU's pages this Guest used last, for optimization
- * when the same Guest runs on the same CPU twice. */
+ /*
+ * We remember which CPU's pages this Guest used last, for optimization
+ * when the same Guest runs on the same CPU twice.
+ */
cpu->last_pages = NULL;
/* No error == success. */
return 0;
}
-/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit)
- * values (in addition to the LHREQ_INITIALIZE value). These are:
+/*L:020
+ * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in
+ * addition to the LHREQ_INITIALIZE value). These are:
*
* base: The start of the Guest-physical memory inside the Launcher memory.
*
@@ -206,14 +312,15 @@
*/
static int initialize(struct file *file, const unsigned long __user *input)
{
- /* "struct lguest" contains everything we (the Host) know about a
- * Guest. */
+ /* "struct lguest" contains all we (the Host) know about a Guest. */
struct lguest *lg;
int err;
unsigned long args[3];
- /* We grab the Big Lguest lock, which protects against multiple
- * simultaneous initializations. */
+ /*
+ * We grab the Big Lguest lock, which protects against multiple
+ * simultaneous initializations.
+ */
mutex_lock(&lguest_lock);
/* You can't initialize twice! Close the device and start again... */
if (file->private_data) {
@@ -248,8 +355,10 @@
if (err)
goto free_eventfds;
- /* Initialize the Guest's shadow page tables, using the toplevel
- * address the Launcher gave us. This allocates memory, so can fail. */
+ /*
+ * Initialize the Guest's shadow page tables, using the toplevel
+ * address the Launcher gave us. This allocates memory, so can fail.
+ */
err = init_guest_pagetable(lg);
if (err)
goto free_regs;
@@ -274,20 +383,24 @@
return err;
}
-/*L:010 The first operation the Launcher does must be a write. All writes
+/*L:010
+ * The first operation the Launcher does must be a write. All writes
* start with an unsigned long number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
- * writes of other values to send interrupts.
+ * writes of other values to send interrupts or set up receipt of notifications.
*
* Note that we overload the "offset" in the /dev/lguest file to indicate what
- * CPU number we're dealing with. Currently this is always 0, since we only
+ * CPU number we're dealing with. Currently this is always 0 since we only
* support uniprocessor Guests, but you can see the beginnings of SMP support
- * here. */
+ * here.
+ */
static ssize_t write(struct file *file, const char __user *in,
size_t size, loff_t *off)
{
- /* Once the Guest is initialized, we hold the "struct lguest" in the
- * file private data. */
+ /*
+ * Once the Guest is initialized, we hold the "struct lguest" in the
+ * file private data.
+ */
struct lguest *lg = file->private_data;
const unsigned long __user *input = (const unsigned long __user *)in;
unsigned long req;
@@ -322,13 +435,15 @@
}
}
-/*L:060 The final piece of interface code is the close() routine. It reverses
+/*L:060
+ * The final piece of interface code is the close() routine. It reverses
* everything done in initialize(). This is usually called because the
* Launcher exited.
*
* Note that the close routine returns 0 or a negative error number: it can't
* really fail, but it can whine. I blame Sun for this wart, and K&R C for
- * letting them do it. :*/
+ * letting them do it.
+:*/
static int close(struct inode *inode, struct file *file)
{
struct lguest *lg = file->private_data;
@@ -338,8 +453,10 @@
if (!lg)
return 0;
- /* We need the big lock, to protect from inter-guest I/O and other
- * Launchers initializing guests. */
+ /*
+ * We need the big lock, to protect from inter-guest I/O and other
+ * Launchers initializing guests.
+ */
mutex_lock(&lguest_lock);
/* Free up the shadow page tables for the Guest. */
@@ -350,18 +467,22 @@
hrtimer_cancel(&lg->cpus[i].hrt);
/* We can free up the register page we allocated. */
free_page(lg->cpus[i].regs_page);
- /* Now all the memory cleanups are done, it's safe to release
- * the Launcher's memory management structure. */
+ /*
+ * Now all the memory cleanups are done, it's safe to release
+ * the Launcher's memory management structure.
+ */
mmput(lg->cpus[i].mm);
}
/* Release any eventfds they registered. */
for (i = 0; i < lg->eventfds->num; i++)
- fput(lg->eventfds->map[i].event);
+ eventfd_ctx_put(lg->eventfds->map[i].event);
kfree(lg->eventfds);
- /* If lg->dead doesn't contain an error code it will be NULL or a
- * kmalloc()ed string, either of which is ok to hand to kfree(). */
+ /*
+ * If lg->dead doesn't contain an error code it will be NULL or a
+ * kmalloc()ed string, either of which is ok to hand to kfree().
+ */
if (!IS_ERR(lg->dead))
kfree(lg->dead);
/* Free the memory allocated to the lguest_struct */
@@ -385,7 +506,8 @@
*
* We begin our understanding with the Host kernel interface which the Launcher
* uses: reading and writing a character device called /dev/lguest. All the
- * work happens in the read(), write() and close() routines: */
+ * work happens in the read(), write() and close() routines:
+ */
static struct file_operations lguest_fops = {
.owner = THIS_MODULE,
.release = close,
@@ -393,8 +515,10 @@
.read = read,
};
-/* This is a textbook example of a "misc" character device. Populate a "struct
- * miscdevice" and register it with misc_register(). */
+/*
+ * This is a textbook example of a "misc" character device. Populate a "struct
+ * miscdevice" and register it with misc_register().
+ */
static struct miscdevice lguest_dev = {
.minor = MISC_DYNAMIC_MINOR,
.name = "lguest",
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a6fe1ab..a8d0aee 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -1,9 +1,11 @@
-/*P:700 The pagetable code, on the other hand, still shows the scars of
+/*P:700
+ * The pagetable code, on the other hand, still shows the scars of
* previous encounters. It's functional, and as neat as it can be in the
* circumstances, but be wary, for these things are subtle and break easily.
* The Guest provides a virtual to physical mapping, but we can neither trust
* it nor use it: we verify and convert it here then point the CPU to the
- * converted Guest pages when running the Guest. :*/
+ * converted Guest pages when running the Guest.
+:*/
/* Copyright (C) Rusty Russell IBM Corporation 2006.
* GPL v2 and any later version */
@@ -17,18 +19,20 @@
#include <asm/bootparam.h>
#include "lg.h"
-/*M:008 We hold reference to pages, which prevents them from being swapped.
+/*M:008
+ * We hold reference to pages, which prevents them from being swapped.
* It'd be nice to have a callback in the "struct mm_struct" when Linux wants
* to swap out. If we had this, and a shrinker callback to trim PTE pages, we
- * could probably consider launching Guests as non-root. :*/
+ * could probably consider launching Guests as non-root.
+:*/
/*H:300
* The Page Table Code
*
- * We use two-level page tables for the Guest. If you're not entirely
- * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
- * diagrams!).
+ * We use two-level page tables for the Guest, or three-level with PAE. If
+ * you're not entirely comfortable with virtual addresses, physical addresses
+ * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page
+ * Table Handling" (with diagrams!).
*
* The Guest keeps page tables, but we maintain the actual ones here: these are
* called "shadow" page tables. Which is a very Guest-centric name: these are
@@ -45,16 +49,18 @@
* (v) Flushing (throwing away) page tables,
* (vi) Mapping the Switcher when the Guest is about to run,
* (vii) Setting up the page tables initially.
- :*/
+:*/
-
-/* 1024 entries in a page table page maps 1024 pages: 4MB. The Switcher is
- * conveniently placed at the top 4MB, so it uses a separate, complete PTE
- * page. */
+/*
+ * The Switcher uses the complete top PTE page. That's 1024 PTE entries (4MB)
+ * or 512 PTE entries with PAE (2MB).
+ */
#define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
-/* For PAE we need the PMD index as well. We use the last 2MB, so we
- * will need the last pmd entry of the last pmd page. */
+/*
+ * For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.
+ */
#ifdef CONFIG_X86_PAE
#define SWITCHER_PMD_INDEX (PTRS_PER_PMD - 1)
#define RESERVE_MEM 2U
@@ -64,14 +70,18 @@
#define CHECK_GPGD_MASK _PAGE_TABLE
#endif
-/* We actually need a separate PTE page for each CPU. Remember that after the
+/*
+ * We actually need a separate PTE page for each CPU. Remember that after the
* Switcher code itself comes two pages for each CPU, and we don't want this
- * CPU's guest to see the pages of any other CPU. */
+ * CPU's guest to see the pages of any other CPU.
+ */
static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
#define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
-/*H:320 The page table code is curly enough to need helper functions to keep it
- * clear and clean.
+/*H:320
+ * The page table code is curly enough to need helper functions to keep it
+ * clear and clean. The kernel itself provides many of them; one advantage
+ * of insisting that the Guest and Host use the same CONFIG_PAE setting.
*
* There are two functions which return pointers to the shadow (aka "real")
* page tables.
@@ -79,7 +89,8 @@
* spgd_addr() takes the virtual address and returns a pointer to the top-level
* page directory entry (PGD) for that address. Since we keep track of several
* page tables, the "i" argument tells us which one we're interested in (it's
- * usually the current one). */
+ * usually the current one).
+ */
static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
{
unsigned int index = pgd_index(vaddr);
@@ -96,9 +107,11 @@
}
#ifdef CONFIG_X86_PAE
-/* This routine then takes the PGD entry given above, which contains the
+/*
+ * This routine then takes the PGD entry given above, which contains the
* address of the PMD page. It then returns a pointer to the PMD entry for the
- * given address. */
+ * given address.
+ */
static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
unsigned int index = pmd_index(vaddr);
@@ -119,9 +132,11 @@
}
#endif
-/* This routine then takes the page directory entry returned above, which
+/*
+ * This routine then takes the page directory entry returned above, which
* contains the address of the page table entry (PTE) page. It then returns a
- * pointer to the PTE entry for the given address. */
+ * pointer to the PTE entry for the given address.
+ */
static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
{
#ifdef CONFIG_X86_PAE
@@ -139,8 +154,10 @@
return &page[pte_index(vaddr)];
}
-/* These two functions just like the above two, except they access the Guest
- * page tables. Hence they return a Guest address. */
+/*
+ * These functions are just like the above two, except they access the Guest
+ * page tables. Hence they return a Guest address.
+ */
static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
{
unsigned int index = vaddr >> (PGDIR_SHIFT);
@@ -148,6 +165,7 @@
}
#ifdef CONFIG_X86_PAE
+/* Follow the PGD to the PMD. */
static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
{
unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
@@ -155,6 +173,7 @@
return gpage + pmd_index(vaddr) * sizeof(pmd_t);
}
+/* Follow the PMD to the PTE. */
static unsigned long gpte_addr(struct lg_cpu *cpu,
pmd_t gpmd, unsigned long vaddr)
{
@@ -164,6 +183,7 @@
return gpage + pte_index(vaddr) * sizeof(pte_t);
}
#else
+/* Follow the PGD to the PTE (no mid-level for !PAE). */
static unsigned long gpte_addr(struct lg_cpu *cpu,
pgd_t gpgd, unsigned long vaddr)
{
@@ -175,17 +195,21 @@
#endif
/*:*/
-/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
- * an optimization (ie. pre-faulting). :*/
+/*M:014
+ * get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting).
+:*/
-/*H:350 This routine takes a page number given by the Guest and converts it to
+/*H:350
+ * This routine takes a page number given by the Guest and converts it to
* an actual, physical page number. It can fail for several reasons: the
* virtual address might not be mapped by the Launcher, the write flag is set
* and the page is read-only, or the write flag was set and the page was
* shared so had to be copied, but we ran out of memory.
*
* This holds a reference to the page, so release_pte() is careful to put that
- * back. */
+ * back.
+ */
static unsigned long get_pfn(unsigned long virtpfn, int write)
{
struct page *page;
@@ -198,33 +222,41 @@
return -1UL;
}
-/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
+/*H:340
+ * Converting a Guest page table entry to a shadow (ie. real) page table
* entry can be a little tricky. The flags are (almost) the same, but the
* Guest PTE contains a virtual page number: the CPU needs the real page
- * number. */
+ * number.
+ */
static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
{
unsigned long pfn, base, flags;
- /* The Guest sets the global flag, because it thinks that it is using
+ /*
+ * The Guest sets the global flag, because it thinks that it is using
* PGE. We only told it to use PGE so it would tell us whether it was
* flushing a kernel mapping or a userspace mapping. We don't actually
- * use the global bit, so throw it away. */
+ * use the global bit, so throw it away.
+ */
flags = (pte_flags(gpte) & ~_PAGE_GLOBAL);
/* The Guest's pages are offset inside the Launcher. */
base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE;
- /* We need a temporary "unsigned long" variable to hold the answer from
+ /*
+ * We need a temporary "unsigned long" variable to hold the answer from
* get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't
* fit in spte.pfn. get_pfn() finds the real physical number of the
- * page, given the virtual number. */
+ * page, given the virtual number.
+ */
pfn = get_pfn(base + pte_pfn(gpte), write);
if (pfn == -1UL) {
kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte));
- /* When we destroy the Guest, we'll go through the shadow page
+ /*
+ * When we destroy the Guest, we'll go through the shadow page
* tables and release_pte() them. Make sure we don't think
- * this one is valid! */
+ * this one is valid!
+ */
flags = 0;
}
/* Now we assemble our shadow PTE from the page number and flags. */
@@ -234,8 +266,10 @@
/*H:460 And to complete the chain, release_pte() looks like this: */
static void release_pte(pte_t pte)
{
- /* Remember that get_user_pages_fast() took a reference to the page, in
- * get_pfn()? We have to put it back now. */
+ /*
+ * Remember that get_user_pages_fast() took a reference to the page, in
+ * get_pfn()? We have to put it back now.
+ */
if (pte_flags(pte) & _PAGE_PRESENT)
put_page(pte_page(pte));
}
@@ -273,7 +307,8 @@
* and return to the Guest without it knowing.
*
* If we fixed up the fault (ie. we mapped the address), this routine returns
- * true. Otherwise, it was a real fault and we need to tell the Guest. */
+ * true. Otherwise, it was a real fault and we need to tell the Guest.
+ */
bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
{
pgd_t gpgd;
@@ -282,6 +317,7 @@
pte_t gpte;
pte_t *spte;
+ /* Mid level for PAE. */
#ifdef CONFIG_X86_PAE
pmd_t *spmd;
pmd_t gpmd;
@@ -298,22 +334,26 @@
if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
- /* This is not really the Guest's fault, but killing it is
- * simple for this corner case. */
+ /*
+ * This is not really the Guest's fault, but killing it is
+ * simple for this corner case.
+ */
if (!ptepage) {
kill_guest(cpu, "out of memory allocating pte page");
return false;
}
/* We check that the Guest pgd is OK. */
check_gpgd(cpu, gpgd);
- /* And we copy the flags to the shadow PGD entry. The page
- * number in the shadow PGD is the page we just allocated. */
+ /*
+ * And we copy the flags to the shadow PGD entry. The page
+ * number in the shadow PGD is the page we just allocated.
+ */
set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
}
#ifdef CONFIG_X86_PAE
gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
- /* middle level not present? We can't map it in. */
+ /* Middle level not present? We can't map it in. */
if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
return false;
@@ -324,8 +364,10 @@
/* No shadow entry: allocate a new shadow PTE page. */
unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
- /* This is not really the Guest's fault, but killing it is
- * simple for this corner case. */
+ /*
+ * This is not really the Guest's fault, but killing it is
+ * simple for this corner case.
+ */
if (!ptepage) {
kill_guest(cpu, "out of memory allocating pte page");
return false;
@@ -334,27 +376,37 @@
/* We check that the Guest pmd is OK. */
check_gpmd(cpu, gpmd);
- /* And we copy the flags to the shadow PMD entry. The page
- * number in the shadow PMD is the page we just allocated. */
+ /*
+ * And we copy the flags to the shadow PMD entry. The page
+ * number in the shadow PMD is the page we just allocated.
+ */
native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
}
- /* OK, now we look at the lower level in the Guest page table: keep its
- * address, because we might update it later. */
+ /*
+ * OK, now we look at the lower level in the Guest page table: keep its
+ * address, because we might update it later.
+ */
gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
#else
- /* OK, now we look at the lower level in the Guest page table: keep its
- * address, because we might update it later. */
+ /*
+ * OK, now we look at the lower level in the Guest page table: keep its
+ * address, because we might update it later.
+ */
gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
#endif
+
+ /* Read the actual PTE value. */
gpte = lgread(cpu, gpte_ptr, pte_t);
/* If this page isn't in the Guest page tables, we can't page it in. */
if (!(pte_flags(gpte) & _PAGE_PRESENT))
return false;
- /* Check they're not trying to write to a page the Guest wants
- * read-only (bit 2 of errcode == write). */
+ /*
+ * Check they're not trying to write to a page the Guest wants
+ * read-only (bit 2 of errcode == write).
+ */
if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
return false;
@@ -362,8 +414,10 @@
if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
return false;
- /* Check that the Guest PTE flags are OK, and the page number is below
- * the pfn_limit (ie. not mapping the Launcher binary). */
+ /*
+ * Check that the Guest PTE flags are OK, and the page number is below
+ * the pfn_limit (ie. not mapping the Launcher binary).
+ */
check_gpte(cpu, gpte);
/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
@@ -373,29 +427,40 @@
/* Get the pointer to the shadow PTE entry we're going to set. */
spte = spte_addr(cpu, *spgd, vaddr);
- /* If there was a valid shadow PTE entry here before, we release it.
- * This can happen with a write to a previously read-only entry. */
+
+ /*
+ * If there was a valid shadow PTE entry here before, we release it.
+ * This can happen with a write to a previously read-only entry.
+ */
release_pte(*spte);
- /* If this is a write, we insist that the Guest page is writable (the
- * final arg to gpte_to_spte()). */
+ /*
+ * If this is a write, we insist that the Guest page is writable (the
+ * final arg to gpte_to_spte()).
+ */
if (pte_dirty(gpte))
*spte = gpte_to_spte(cpu, gpte, 1);
else
- /* If this is a read, don't set the "writable" bit in the page
+ /*
+ * If this is a read, don't set the "writable" bit in the page
* table entry, even if the Guest says it's writable. That way
* we will come back here when a write does actually occur, so
- * we can update the Guest's _PAGE_DIRTY flag. */
+ * we can update the Guest's _PAGE_DIRTY flag.
+ */
native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
- /* Finally, we write the Guest PTE entry back: we've set the
- * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
+ /*
+ * Finally, we write the Guest PTE entry back: we've set the
+ * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags.
+ */
lgwrite(cpu, gpte_ptr, pte_t, gpte);
- /* The fault is fixed, the page table is populated, the mapping
+ /*
+ * The fault is fixed, the page table is populated, the mapping
* manipulated, the result returned and the code complete. A small
* delay and a trace of alliteration are the only indications the Guest
- * has that a page fault occurred at all. */
+ * has that a page fault occurred at all.
+ */
return true;
}
@@ -408,7 +473,8 @@
* mapped, so it's overkill.
*
* This is a quick version which answers the question: is this virtual address
- * mapped by the shadow page tables, and is it writable? */
+ * mapped by the shadow page tables, and is it writable?
+ */
static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
{
pgd_t *spgd;
@@ -428,21 +494,26 @@
return false;
#endif
- /* Check the flags on the pte entry itself: it must be present and
- * writable. */
+ /*
+ * Check the flags on the pte entry itself: it must be present and
+ * writable.
+ */
flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
}
-/* So, when pin_stack_pages() asks us to pin a page, we check if it's already
+/*
+ * So, when pin_stack_pages() asks us to pin a page, we check if it's already
* in the page tables, and if not, we call demand_page() with error code 2
- * (meaning "write"). */
+ * (meaning "write").
+ */
void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
{
if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2))
kill_guest(cpu, "bad stack page %#lx", vaddr);
}
+/*:*/
#ifdef CONFIG_X86_PAE
static void release_pmd(pmd_t *spmd)
@@ -479,15 +550,21 @@
}
#else /* !CONFIG_X86_PAE */
-/*H:450 If we chase down the release_pgd() code, it looks like this: */
+/*H:450
+ * If we chase down the release_pgd() code, the non-PAE version looks like
+ * this. The PAE version is almost identical, but instead of calling
+ * release_pte it calls release_pmd(), which looks much like this.
+ */
static void release_pgd(pgd_t *spgd)
{
/* If the entry's not present, there's nothing to release. */
if (pgd_flags(*spgd) & _PAGE_PRESENT) {
unsigned int i;
- /* Converting the pfn to find the actual PTE page is easy: turn
+ /*
+ * Converting the pfn to find the actual PTE page is easy: turn
* the page number into a physical address, then convert to a
- * virtual address (easy for kernel pages like this one). */
+ * virtual address (easy for kernel pages like this one).
+ */
pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
/* For each entry in the page, we might need to release it. */
for (i = 0; i < PTRS_PER_PTE; i++)
@@ -499,9 +576,12 @@
}
}
#endif
-/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+
+/*H:445
+ * We saw flush_user_mappings() twice: once from the flush_user_mappings()
* hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the Guest's kernel address. */
+ * It simply releases every PTE page from 0 up to the Guest's kernel address.
+ */
static void flush_user_mappings(struct lguest *lg, int idx)
{
unsigned int i;
@@ -510,10 +590,12 @@
release_pgd(lg->pgdirs[idx].pgdir + i);
}
-/*H:440 (v) Flushing (throwing away) page tables,
+/*H:440
+ * (v) Flushing (throwing away) page tables,
*
* The Guest has a hypercall to throw away the page tables: it's used when a
- * large number of mappings have been changed. */
+ * large number of mappings have been changed.
+ */
void guest_pagetable_flush_user(struct lg_cpu *cpu)
{
/* Drop the userspace part of the current page table. */
@@ -551,9 +633,11 @@
return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
}
-/* We keep several page tables. This is a simple routine to find the page
+/*
+ * We keep several page tables. This is a simple routine to find the page
* table (if any) corresponding to this top-level address the Guest has given
- * us. */
+ * us.
+ */
static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
{
unsigned int i;
@@ -563,9 +647,11 @@
return i;
}
-/*H:435 And this is us, creating the new page directory. If we really do
+/*H:435
+ * And this is us, creating the new page directory. If we really do
* allocate a new one (and so the kernel parts are not there), we set
- * blank_pgdir. */
+ * blank_pgdir.
+ */
static unsigned int new_pgdir(struct lg_cpu *cpu,
unsigned long gpgdir,
int *blank_pgdir)
@@ -575,8 +661,10 @@
pmd_t *pmd_table;
#endif
- /* We pick one entry at random to throw out. Choosing the Least
- * Recently Used might be better, but this is easy. */
+ /*
+ * We pick one entry at random to throw out. Choosing the Least
+ * Recently Used might be better, but this is easy.
+ */
next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
/* If it's never been allocated at all before, try now. */
if (!cpu->lg->pgdirs[next].pgdir) {
@@ -587,8 +675,10 @@
next = cpu->cpu_pgd;
else {
#ifdef CONFIG_X86_PAE
- /* In PAE mode, allocate a pmd page and populate the
- * last pgd entry. */
+ /*
+ * In PAE mode, allocate a pmd page and populate the
+ * last pgd entry.
+ */
pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
if (!pmd_table) {
free_page((long)cpu->lg->pgdirs[next].pgdir);
@@ -598,8 +688,10 @@
set_pgd(cpu->lg->pgdirs[next].pgdir +
SWITCHER_PGD_INDEX,
__pgd(__pa(pmd_table) | _PAGE_PRESENT));
- /* This is a blank page, so there are no kernel
- * mappings: caller must map the stack! */
+ /*
+ * This is a blank page, so there are no kernel
+ * mappings: caller must map the stack!
+ */
*blank_pgdir = 1;
}
#else
@@ -615,19 +707,23 @@
return next;
}
-/*H:430 (iv) Switching page tables
+/*H:430
+ * (iv) Switching page tables
*
* Now we've seen all the page table setting and manipulation, let's see
* what happens when the Guest changes page tables (ie. changes the top-level
- * pgdir). This occurs on almost every context switch. */
+ * pgdir). This occurs on almost every context switch.
+ */
void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
{
int newpgdir, repin = 0;
/* Look to see if we have this one already. */
newpgdir = find_pgdir(cpu->lg, pgtable);
- /* If not, we allocate or mug an existing one: if it's a fresh one,
- * repin gets set to 1. */
+ /*
+ * If not, we allocate or mug an existing one: if it's a fresh one,
+ * repin gets set to 1.
+ */
if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
newpgdir = new_pgdir(cpu, pgtable, &repin);
/* Change the current pgd index to the new one. */
@@ -637,9 +733,11 @@
pin_stack_pages(cpu);
}
-/*H:470 Finally, a routine which throws away everything: all PGD entries in all
+/*H:470
+ * Finally, a routine which throws away everything: all PGD entries in all
* the shadow page tables, including the Guest's kernel mappings. This is used
- * when we destroy the Guest. */
+ * when we destroy the Guest.
+ */
static void release_all_pagetables(struct lguest *lg)
{
unsigned int i, j;
@@ -656,8 +754,10 @@
spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
- /* And release the pmd entries of that pmd page,
- * except for the switcher pmd. */
+ /*
+ * And release the pmd entries of that pmd page,
+ * except for the switcher pmd.
+ */
for (k = 0; k < SWITCHER_PMD_INDEX; k++)
release_pmd(&pmdpage[k]);
#endif
@@ -667,10 +767,12 @@
}
}
-/* We also throw away everything when a Guest tells us it's changed a kernel
+/*
+ * We also throw away everything when a Guest tells us it's changed a kernel
* mapping. Since kernel mappings are in every page table, it's easiest to
* throw them all away. This traps the Guest in amber for a while as
- * everything faults back in, but it's rare. */
+ * everything faults back in, but it's rare.
+ */
void guest_pagetable_clear_all(struct lg_cpu *cpu)
{
release_all_pagetables(cpu->lg);
@@ -678,15 +780,19 @@
pin_stack_pages(cpu);
}
/*:*/
-/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+
+/*M:009
+ * Since we throw away all mappings when a kernel mapping changes, our
* performance sucks for guests using highmem. In fact, a guest with
* PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
* usually slower than a Guest with less memory.
*
* This, of course, cannot be fixed. It would take some kind of... well, I
- * don't know, but the term "puissant code-fu" comes to mind. :*/
+ * don't know, but the term "puissant code-fu" comes to mind.
+:*/
-/*H:420 This is the routine which actually sets the page table entry for then
+/*H:420
+ * This is the routine which actually sets the page table entry for then
* "idx"'th shadow page table.
*
* Normally, we can just throw out the old entry and replace it with 0: if they
@@ -715,31 +821,36 @@
spmd = spmd_addr(cpu, *spgd, vaddr);
if (pmd_flags(*spmd) & _PAGE_PRESENT) {
#endif
- /* Otherwise, we start by releasing
- * the existing entry. */
+ /* Otherwise, start by releasing the existing entry. */
pte_t *spte = spte_addr(cpu, *spgd, vaddr);
release_pte(*spte);
- /* If they're setting this entry as dirty or accessed,
- * we might as well put that entry they've given us
- * in now. This shaves 10% off a
- * copy-on-write micro-benchmark. */
+ /*
+ * If they're setting this entry as dirty or accessed,
+ * we might as well put that entry they've given us in
+ * now. This shaves 10% off a copy-on-write
+ * micro-benchmark.
+ */
if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
check_gpte(cpu, gpte);
native_set_pte(spte,
gpte_to_spte(cpu, gpte,
pte_flags(gpte) & _PAGE_DIRTY));
- } else
- /* Otherwise kill it and we can demand_page()
- * it in later. */
+ } else {
+ /*
+ * Otherwise kill it and we can demand_page()
+ * it in later.
+ */
native_set_pte(spte, __pte(0));
+ }
#ifdef CONFIG_X86_PAE
}
#endif
}
}
-/*H:410 Updating a PTE entry is a little trickier.
+/*H:410
+ * Updating a PTE entry is a little trickier.
*
* We keep track of several different page tables (the Guest uses one for each
* process, so it makes sense to cache at least a few). Each of these have
@@ -748,12 +859,15 @@
* all the page tables, not just the current one. This is rare.
*
* The benefit is that when we have to track a new page table, we can keep all
- * the kernel mappings. This speeds up context switch immensely. */
+ * the kernel mappings. This speeds up context switch immensely.
+ */
void guest_set_pte(struct lg_cpu *cpu,
unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
{
- /* Kernel mappings must be changed on all top levels. Slow, but doesn't
- * happen often. */
+ /*
+ * Kernel mappings must be changed on all top levels. Slow, but doesn't
+ * happen often.
+ */
if (vaddr >= cpu->lg->kernel_address) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -795,19 +909,25 @@
/* ... throw it away. */
release_pgd(lg->pgdirs[pgdir].pgdir + idx);
}
+
#ifdef CONFIG_X86_PAE
+/* For setting a mid-level, we just throw everything away. It's easy. */
void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
{
guest_pagetable_clear_all(&lg->cpus[0]);
}
#endif
-/* Once we know how much memory we have we can construct simple identity
- * (which set virtual == physical) and linear mappings
- * which will get the Guest far enough into the boot to create its own.
+/*H:505
+ * To get through boot, we construct simple identity page mappings (which
+ * set virtual == physical) and linear mappings which will get the Guest far
+ * enough into the boot to create its own. The linear mapping means we
+ * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET,
+ * as you'll see.
*
* We lay them out of the way, just below the initrd (which is why we need to
- * know its size here). */
+ * know its size here).
+ */
static unsigned long setup_pagetables(struct lguest *lg,
unsigned long mem,
unsigned long initrd_size)
@@ -825,8 +945,10 @@
unsigned int phys_linear;
#endif
- /* We have mapped_pages frames to map, so we need
- * linear_pages page tables to map them. */
+ /*
+ * We have mapped_pages frames to map, so we need linear_pages page
+ * tables to map them.
+ */
mapped_pages = mem / PAGE_SIZE;
linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE;
@@ -837,10 +959,16 @@
linear = (void *)pgdir - linear_pages * PAGE_SIZE;
#ifdef CONFIG_X86_PAE
+ /*
+ * And the single mid page goes below that. We only use one, but
+ * that's enough to map 1G, which definitely gets us through boot.
+ */
pmds = (void *)linear - PAGE_SIZE;
#endif
- /* Linear mapping is easy: put every page's address into the
- * mapping in order. */
+ /*
+ * Linear mapping is easy: put every page's address into the
+ * mapping in order.
+ */
for (i = 0; i < mapped_pages; i++) {
pte_t pte;
pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER));
@@ -848,11 +976,14 @@
return -EFAULT;
}
- /* The top level points to the linear page table pages above.
- * We setup the identity and linear mappings here. */
#ifdef CONFIG_X86_PAE
+ /*
+ * Make the Guest PMD entries point to the corresponding place in the
+ * linear mapping (up to one page worth of PMD).
+ */
for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
i += PTRS_PER_PTE, j++) {
+ /* FIXME: native_set_pmd is overkill here. */
native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
@@ -860,18 +991,36 @@
return -EFAULT;
}
+ /* One PGD entry, pointing to that PMD page. */
set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+ /* Copy it in as the first PGD entry (ie. addresses 0-1G). */
if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
return -EFAULT;
+ /*
+ * And the third PGD entry (ie. addresses 3G-4G).
+ *
+ * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000.
+ */
if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
return -EFAULT;
#else
+ /*
+ * The top level points to the linear page table pages above.
+ * We setup the identity and linear mappings here.
+ */
phys_linear = (unsigned long)linear - mem_base;
for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
pgd_t pgd;
+ /*
+ * Create a PGD entry which points to the right part of the
+ * linear PTE pages.
+ */
pgd = __pgd((phys_linear + i * sizeof(pte_t)) |
(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
+ /*
+ * Copy it into the PGD page at 0 and PAGE_OFFSET.
+ */
if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd))
|| copy_to_user(&pgdir[pgd_index(PAGE_OFFSET)
+ i / PTRS_PER_PTE],
@@ -880,15 +1029,19 @@
}
#endif
- /* We return the top level (guest-physical) address: remember where
- * this is. */
+ /*
+ * We return the top level (guest-physical) address: we remember where
+ * this is to write it into lguest_data when the Guest initializes.
+ */
return (unsigned long)pgdir - mem_base;
}
-/*H:500 (vii) Setting up the page tables initially.
+/*H:500
+ * (vii) Setting up the page tables initially.
*
* When a Guest is first created, the Launcher tells us where the toplevel of
- * its first page table is. We set some things up here: */
+ * its first page table is. We set some things up here:
+ */
int init_guest_pagetable(struct lguest *lg)
{
u64 mem;
@@ -898,21 +1051,27 @@
pgd_t *pgd;
pmd_t *pmd_table;
#endif
- /* Get the Guest memory size and the ramdisk size from the boot header
- * located at lg->mem_base (Guest address 0). */
+ /*
+ * Get the Guest memory size and the ramdisk size from the boot header
+ * located at lg->mem_base (Guest address 0).
+ */
if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
|| get_user(initrd_size, &boot->hdr.ramdisk_size))
return -EFAULT;
- /* We start on the first shadow page table, and give it a blank PGD
- * page. */
+ /*
+ * We start on the first shadow page table, and give it a blank PGD
+ * page.
+ */
lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
return lg->pgdirs[0].gpgdir;
lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
if (!lg->pgdirs[0].pgdir)
return -ENOMEM;
+
#ifdef CONFIG_X86_PAE
+ /* For PAE, we also create the initial mid-level. */
pgd = lg->pgdirs[0].pgdir;
pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
if (!pmd_table)
@@ -921,27 +1080,33 @@
set_pgd(pgd + SWITCHER_PGD_INDEX,
__pgd(__pa(pmd_table) | _PAGE_PRESENT));
#endif
+
+ /* This is the current page table. */
lg->cpus[0].cpu_pgd = 0;
return 0;
}
-/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
+/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
void page_table_guest_data_init(struct lg_cpu *cpu)
{
/* We get the kernel address: above this is all kernel memory. */
if (get_user(cpu->lg->kernel_address,
&cpu->lg->lguest_data->kernel_address)
- /* We tell the Guest that it can't use the top 2 or 4 MB
- * of virtual addresses used by the Switcher. */
+ /*
+ * We tell the Guest that it can't use the top 2 or 4 MB
+ * of virtual addresses used by the Switcher.
+ */
|| put_user(RESERVE_MEM * 1024 * 1024,
&cpu->lg->lguest_data->reserve_mem)
|| put_user(cpu->lg->pgdirs[0].gpgdir,
&cpu->lg->lguest_data->pgdir))
kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
- /* In flush_user_mappings() we loop from 0 to
+ /*
+ * In flush_user_mappings() we loop from 0 to
* "pgd_index(lg->kernel_address)". This assumes it won't hit the
- * Switcher mappings, so check that now. */
+ * Switcher mappings, so check that now.
+ */
#ifdef CONFIG_X86_PAE
if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
@@ -964,12 +1129,14 @@
free_page((long)lg->pgdirs[i].pgdir);
}
-/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
+/*H:480
+ * (vi) Mapping the Switcher when the Guest is about to run.
*
* The Switcher and the two pages for this CPU need to be visible in the
* Guest (and not the pages for other CPUs). We have the appropriate PTE pages
* for each CPU already set up, we just need to hook them in now we know which
- * Guest is about to run on this CPU. */
+ * Guest is about to run on this CPU.
+ */
void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
{
pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -980,30 +1147,38 @@
pmd_t switcher_pmd;
pmd_t *pmd_table;
+ /* FIXME: native_set_pmd is overkill here. */
native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
PAGE_SHIFT, PAGE_KERNEL_EXEC));
+ /* Figure out where the pmd page is, by reading the PGD, and converting
+ * it to a virtual address. */
pmd_table = __va(pgd_pfn(cpu->lg->
pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
<< PAGE_SHIFT);
+ /* Now write it into the shadow page table. */
native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
#else
pgd_t switcher_pgd;
- /* Make the last PGD entry for this Guest point to the Switcher's PTE
- * page for this CPU (with appropriate flags). */
+ /*
+ * Make the last PGD entry for this Guest point to the Switcher's PTE
+ * page for this CPU (with appropriate flags).
+ */
switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
#endif
- /* We also change the Switcher PTE page. When we're running the Guest,
+ /*
+ * We also change the Switcher PTE page. When we're running the Guest,
* we want the Guest's "regs" page to appear where the first Switcher
* page for this CPU is. This is an optimization: when the Switcher
* saves the Guest registers, it saves them into the first page of this
* CPU's "struct lguest_pages": if we make sure the Guest's register
* page is already mapped there, we don't have to copy them out
- * again. */
+ * again.
+ */
pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
native_set_pte(®s_pte, pfn_pte(pfn, PAGE_KERNEL));
native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
@@ -1019,10 +1194,12 @@
free_page((long)switcher_pte_page(i));
}
-/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
+/*H:520
+ * Setting up the Switcher PTE page for given CPU is fairly easy, given
* the CPU number and the "struct page"s for the Switcher code itself.
*
- * Currently the Switcher is less than a page long, so "pages" is always 1. */
+ * Currently the Switcher is less than a page long, so "pages" is always 1.
+ */
static __init void populate_switcher_pte_page(unsigned int cpu,
struct page *switcher_page[],
unsigned int pages)
@@ -1043,13 +1220,16 @@
native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
- /* The second page contains the "struct lguest_ro_state", and is
- * read-only. */
+ /*
+ * The second page contains the "struct lguest_ro_state", and is
+ * read-only.
+ */
native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
}
-/* We've made it through the page table code. Perhaps our tired brains are
+/*
+ * We've made it through the page table code. Perhaps our tired brains are
* still processing the details, or perhaps we're simply glad it's over.
*
* If nothing else, note that all this complexity in juggling shadow page tables
@@ -1058,10 +1238,13 @@
* uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
* have implemented shadow page table support directly into hardware.
*
- * There is just one file remaining in the Host. */
+ * There is just one file remaining in the Host.
+ */
-/*H:510 At boot or module load time, init_pagetables() allocates and populates
- * the Switcher PTE page for each CPU. */
+/*H:510
+ * At boot or module load time, init_pagetables() allocates and populates
+ * the Switcher PTE page for each CPU.
+ */
__init int init_pagetables(struct page **switcher_page, unsigned int pages)
{
unsigned int i;
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 482ed5a..951c57b 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -1,4 +1,5 @@
-/*P:600 The x86 architecture has segments, which involve a table of descriptors
+/*P:600
+ * The x86 architecture has segments, which involve a table of descriptors
* which can be used to do funky things with virtual address interpretation.
* We originally used to use segments so the Guest couldn't alter the
* Guest<->Host Switcher, and then we had to trim Guest segments, and restore
@@ -8,7 +9,8 @@
*
* In these modern times, the segment handling code consists of simple sanity
* checks, and the worst you'll experience reading this code is butterfly-rash
- * from frolicking through its parklike serenity. :*/
+ * from frolicking through its parklike serenity.
+:*/
#include "lg.h"
/*H:600
@@ -41,10 +43,12 @@
* begin.
*/
-/* There are several entries we don't let the Guest set. The TSS entry is the
+/*
+ * There are several entries we don't let the Guest set. The TSS entry is the
* "Task State Segment" which controls all kinds of delicate things. The
* LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the
- * the Guest can't be trusted to deal with double faults. */
+ * the Guest can't be trusted to deal with double faults.
+ */
static bool ignored_gdt(unsigned int num)
{
return (num == GDT_ENTRY_TSS
@@ -53,42 +57,52 @@
|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
}
-/*H:630 Once the Guest gave us new GDT entries, we fix them up a little. We
+/*H:630
+ * Once the Guest gave us new GDT entries, we fix them up a little. We
* don't care if they're invalid: the worst that can happen is a General
* Protection Fault in the Switcher when it restores a Guest segment register
* which tries to use that entry. Then we kill the Guest for causing such a
- * mess: the message will be "unhandled trap 256". */
+ * mess: the message will be "unhandled trap 256".
+ */
static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end)
{
unsigned int i;
for (i = start; i < end; i++) {
- /* We never copy these ones to real GDT, so we don't care what
- * they say */
+ /*
+ * We never copy these ones to real GDT, so we don't care what
+ * they say
+ */
if (ignored_gdt(i))
continue;
- /* Segment descriptors contain a privilege level: the Guest is
+ /*
+ * Segment descriptors contain a privilege level: the Guest is
* sometimes careless and leaves this as 0, even though it's
- * running at privilege level 1. If so, we fix it here. */
+ * running at privilege level 1. If so, we fix it here.
+ */
if ((cpu->arch.gdt[i].b & 0x00006000) == 0)
cpu->arch.gdt[i].b |= (GUEST_PL << 13);
- /* Each descriptor has an "accessed" bit. If we don't set it
+ /*
+ * Each descriptor has an "accessed" bit. If we don't set it
* now, the CPU will try to set it when the Guest first loads
* that entry into a segment register. But the GDT isn't
- * writable by the Guest, so bad things can happen. */
+ * writable by the Guest, so bad things can happen.
+ */
cpu->arch.gdt[i].b |= 0x00000100;
}
}
-/*H:610 Like the IDT, we never simply use the GDT the Guest gives us. We keep
+/*H:610
+ * Like the IDT, we never simply use the GDT the Guest gives us. We keep
* a GDT for each CPU, and copy across the Guest's entries each time we want to
* run the Guest on that CPU.
*
* This routine is called at boot or modprobe time for each CPU to set up the
* constant GDT entries: the ones which are the same no matter what Guest we're
- * running. */
+ * running.
+ */
void setup_default_gdt_entries(struct lguest_ro_state *state)
{
struct desc_struct *gdt = state->guest_gdt;
@@ -98,30 +112,37 @@
gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
- /* The TSS segment refers to the TSS entry for this particular CPU.
+ /*
+ * The TSS segment refers to the TSS entry for this particular CPU.
* Forgive the magic flags: the 0x8900 means the entry is Present, it's
* privilege level 0 Available 386 TSS system segment, and the 0x67
- * means Saturn is eclipsed by Mercury in the twelfth house. */
+ * means Saturn is eclipsed by Mercury in the twelfth house.
+ */
gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
| ((tss >> 16) & 0x000000FF);
}
-/* This routine sets up the initial Guest GDT for booting. All entries start
- * as 0 (unusable). */
+/*
+ * This routine sets up the initial Guest GDT for booting. All entries start
+ * as 0 (unusable).
+ */
void setup_guest_gdt(struct lg_cpu *cpu)
{
- /* Start with full 0-4G segments... */
+ /*
+ * Start with full 0-4G segments...except the Guest is allowed to use
+ * them, so set the privilege level appropriately in the flags.
+ */
cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT;
cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT;
- /* ...except the Guest is allowed to use them, so set the privilege
- * level appropriately in the flags. */
cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13);
cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
}
-/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
- * entries. */
+/*H:650
+ * An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries.
+ */
void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
{
unsigned int i;
@@ -130,26 +151,34 @@
gdt[i] = cpu->arch.gdt[i];
}
-/*H:640 When the Guest is run on a different CPU, or the GDT entries have
- * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
- * CPU's GDT. */
+/*H:640
+ * When the Guest is run on a different CPU, or the GDT entries have changed,
+ * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's
+ * GDT.
+ */
void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
{
unsigned int i;
- /* The default entries from setup_default_gdt_entries() are not
- * replaced. See ignored_gdt() above. */
+ /*
+ * The default entries from setup_default_gdt_entries() are not
+ * replaced. See ignored_gdt() above.
+ */
for (i = 0; i < GDT_ENTRIES; i++)
if (!ignored_gdt(i))
gdt[i] = cpu->arch.gdt[i];
}
-/*H:620 This is where the Guest asks us to load a new GDT entry
- * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */
+/*H:620
+ * This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in.
+ */
void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
{
- /* We assume the Guest has the same number of GDT entries as the
- * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
+ /*
+ * We assume the Guest has the same number of GDT entries as the
+ * Host, otherwise we'd have to dynamically allocate the Guest GDT.
+ */
if (num >= ARRAY_SIZE(cpu->arch.gdt))
kill_guest(cpu, "too many gdt entries %i", num);
@@ -157,15 +186,19 @@
cpu->arch.gdt[num].a = lo;
cpu->arch.gdt[num].b = hi;
fixup_gdt_table(cpu, num, num+1);
- /* Mark that the GDT changed so the core knows it has to copy it again,
- * even if the Guest is run on the same CPU. */
+ /*
+ * Mark that the GDT changed so the core knows it has to copy it again,
+ * even if the Guest is run on the same CPU.
+ */
cpu->changed |= CHANGED_GDT;
}
-/* This is the fast-track version for just changing the three TLS entries.
+/*
+ * This is the fast-track version for just changing the three TLS entries.
* Remember that this happens on every context switch, so it's worth
* optimizing. But wouldn't it be neater to have a single hypercall to cover
- * both cases? */
+ * both cases?
+ */
void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
{
struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN];
@@ -175,7 +208,6 @@
/* Note that just the TLS entries have changed. */
cpu->changed |= CHANGED_GDT_TLS;
}
-/*:*/
/*H:660
* With this, we have finished the Host.
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index eaf722f..6ae3888 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,13 +17,15 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/*P:450 This file contains the x86-specific lguest code. It used to be all
+/*P:450
+ * This file contains the x86-specific lguest code. It used to be all
* mixed in with drivers/lguest/core.c but several foolhardy code slashers
* wrestled most of the dependencies out to here in preparation for porting
* lguest to other architectures (see what I mean by foolhardy?).
*
* This also contains a couple of non-obvious setup and teardown pieces which
- * were implemented after days of debugging pain. :*/
+ * were implemented after days of debugging pain.
+:*/
#include <linux/kernel.h>
#include <linux/start_kernel.h>
#include <linux/string.h>
@@ -82,25 +84,33 @@
*/
static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages)
{
- /* Copying all this data can be quite expensive. We usually run the
+ /*
+ * Copying all this data can be quite expensive. We usually run the
* same Guest we ran last time (and that Guest hasn't run anywhere else
* meanwhile). If that's not the case, we pretend everything in the
- * Guest has changed. */
+ * Guest has changed.
+ */
if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) {
__get_cpu_var(last_cpu) = cpu;
cpu->last_pages = pages;
cpu->changed = CHANGED_ALL;
}
- /* These copies are pretty cheap, so we do them unconditionally: */
- /* Save the current Host top-level page directory. */
+ /*
+ * These copies are pretty cheap, so we do them unconditionally: */
+ /* Save the current Host top-level page directory.
+ */
pages->state.host_cr3 = __pa(current->mm->pgd);
- /* Set up the Guest's page tables to see this CPU's pages (and no
- * other CPU's pages). */
+ /*
+ * Set up the Guest's page tables to see this CPU's pages (and no
+ * other CPU's pages).
+ */
map_switcher_in_guest(cpu, pages);
- /* Set up the two "TSS" members which tell the CPU what stack to use
+ /*
+ * Set up the two "TSS" members which tell the CPU what stack to use
* for traps which do directly into the Guest (ie. traps at privilege
- * level 1). */
+ * level 1).
+ */
pages->state.guest_tss.sp1 = cpu->esp1;
pages->state.guest_tss.ss1 = cpu->ss1;
@@ -125,97 +135,126 @@
/* This is a dummy value we need for GCC's sake. */
unsigned int clobber;
- /* Copy the guest-specific information into this CPU's "struct
- * lguest_pages". */
+ /*
+ * Copy the guest-specific information into this CPU's "struct
+ * lguest_pages".
+ */
copy_in_guest_info(cpu, pages);
- /* Set the trap number to 256 (impossible value). If we fault while
+ /*
+ * Set the trap number to 256 (impossible value). If we fault while
* switching to the Guest (bad segment registers or bug), this will
- * cause us to abort the Guest. */
+ * cause us to abort the Guest.
+ */
cpu->regs->trapnum = 256;
- /* Now: we push the "eflags" register on the stack, then do an "lcall".
+ /*
+ * Now: we push the "eflags" register on the stack, then do an "lcall".
* This is how we change from using the kernel code segment to using
* the dedicated lguest code segment, as well as jumping into the
* Switcher.
*
* The lcall also pushes the old code segment (KERNEL_CS) onto the
* stack, then the address of this call. This stack layout happens to
- * exactly match the stack layout created by an interrupt... */
+ * exactly match the stack layout created by an interrupt...
+ */
asm volatile("pushf; lcall *lguest_entry"
- /* This is how we tell GCC that %eax ("a") and %ebx ("b")
- * are changed by this routine. The "=" means output. */
+ /*
+ * This is how we tell GCC that %eax ("a") and %ebx ("b")
+ * are changed by this routine. The "=" means output.
+ */
: "=a"(clobber), "=b"(clobber)
- /* %eax contains the pages pointer. ("0" refers to the
+ /*
+ * %eax contains the pages pointer. ("0" refers to the
* 0-th argument above, ie "a"). %ebx contains the
* physical address of the Guest's top-level page
- * directory. */
+ * directory.
+ */
: "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
- /* We tell gcc that all these registers could change,
+ /*
+ * We tell gcc that all these registers could change,
* which means we don't have to save and restore them in
- * the Switcher. */
+ * the Switcher.
+ */
: "memory", "%edx", "%ecx", "%edi", "%esi");
}
/*:*/
-/*M:002 There are hooks in the scheduler which we can register to tell when we
+/*M:002
+ * There are hooks in the scheduler which we can register to tell when we
* get kicked off the CPU (preempt_notifier_register()). This would allow us
* to lazily disable SYSENTER which would regain some performance, and should
* also simplify copy_in_guest_info(). Note that we'd still need to restore
* things when we exit to Launcher userspace, but that's fairly easy.
*
- * We could also try using this hooks for PGE, but that might be too expensive.
+ * We could also try using these hooks for PGE, but that might be too expensive.
*
- * The hooks were designed for KVM, but we can also put them to good use. :*/
+ * The hooks were designed for KVM, but we can also put them to good use.
+:*/
-/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
- * are disabled: we own the CPU. */
+/*H:040
+ * This is the i386-specific code to setup and run the Guest. Interrupts
+ * are disabled: we own the CPU.
+ */
void lguest_arch_run_guest(struct lg_cpu *cpu)
{
- /* Remember the awfully-named TS bit? If the Guest has asked to set it
+ /*
+ * Remember the awfully-named TS bit? If the Guest has asked to set it
* we set it now, so we can trap and pass that trap to the Guest if it
- * uses the FPU. */
+ * uses the FPU.
+ */
if (cpu->ts)
unlazy_fpu(current);
- /* SYSENTER is an optimized way of doing system calls. We can't allow
+ /*
+ * SYSENTER is an optimized way of doing system calls. We can't allow
* it because it always jumps to privilege level 0. A normal Guest
* won't try it because we don't advertise it in CPUID, but a malicious
* Guest (or malicious Guest userspace program) could, so we tell the
- * CPU to disable it before running the Guest. */
+ * CPU to disable it before running the Guest.
+ */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
- /* Now we actually run the Guest. It will return when something
+ /*
+ * Now we actually run the Guest. It will return when something
* interesting happens, and we can examine its registers to see what it
- * was doing. */
+ * was doing.
+ */
run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
- /* Note that the "regs" structure contains two extra entries which are
+ /*
+ * Note that the "regs" structure contains two extra entries which are
* not really registers: a trap number which says what interrupt or
* trap made the switcher code come back, and an error code which some
- * traps set. */
+ * traps set.
+ */
/* Restore SYSENTER if it's supposed to be on. */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
- /* If the Guest page faulted, then the cr2 register will tell us the
+ /*
+ * If the Guest page faulted, then the cr2 register will tell us the
* bad virtual address. We have to grab this now, because once we
* re-enable interrupts an interrupt could fault and thus overwrite
- * cr2, or we could even move off to a different CPU. */
+ * cr2, or we could even move off to a different CPU.
+ */
if (cpu->regs->trapnum == 14)
cpu->arch.last_pagefault = read_cr2();
- /* Similarly, if we took a trap because the Guest used the FPU,
+ /*
+ * Similarly, if we took a trap because the Guest used the FPU,
* we have to restore the FPU it expects to see.
* math_state_restore() may sleep and we may even move off to
* a different CPU. So all the critical stuff should be done
- * before this. */
+ * before this.
+ */
else if (cpu->regs->trapnum == 7)
math_state_restore();
}
-/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+/*H:130
+ * Now we've examined the hypercall code; our Guest can make requests.
* Our Guest is usually so well behaved; it never tries to do things it isn't
* allowed to, and uses hypercalls instead. Unfortunately, Linux's paravirtual
* infrastructure isn't quite complete, because it doesn't contain replacements
@@ -225,26 +264,33 @@
*
* When the Guest uses one of these instructions, we get a trap (General
* Protection Fault) and come here. We see if it's one of those troublesome
- * instructions and skip over it. We return true if we did. */
+ * instructions and skip over it. We return true if we did.
+ */
static int emulate_insn(struct lg_cpu *cpu)
{
u8 insn;
unsigned int insnlen = 0, in = 0, shift = 0;
- /* The eip contains the *virtual* address of the Guest's instruction:
- * guest_pa just subtracts the Guest's page_offset. */
+ /*
+ * The eip contains the *virtual* address of the Guest's instruction:
+ * guest_pa just subtracts the Guest's page_offset.
+ */
unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
- /* This must be the Guest kernel trying to do something, not userspace!
+ /*
+ * This must be the Guest kernel trying to do something, not userspace!
* The bottom two bits of the CS segment register are the privilege
- * level. */
+ * level.
+ */
if ((cpu->regs->cs & 3) != GUEST_PL)
return 0;
/* Decoding x86 instructions is icky. */
insn = lgread(cpu, physaddr, u8);
- /* 0x66 is an "operand prefix". It means it's using the upper 16 bits
- of the eax register. */
+ /*
+ * 0x66 is an "operand prefix". It means it's using the upper 16 bits
+ * of the eax register.
+ */
if (insn == 0x66) {
shift = 16;
/* The instruction is 1 byte so far, read the next byte. */
@@ -252,8 +298,10 @@
insn = lgread(cpu, physaddr + insnlen, u8);
}
- /* We can ignore the lower bit for the moment and decode the 4 opcodes
- * we need to emulate. */
+ /*
+ * We can ignore the lower bit for the moment and decode the 4 opcodes
+ * we need to emulate.
+ */
switch (insn & 0xFE) {
case 0xE4: /* in <next byte>,%al */
insnlen += 2;
@@ -274,9 +322,11 @@
return 0;
}
- /* If it was an "IN" instruction, they expect the result to be read
+ /*
+ * If it was an "IN" instruction, they expect the result to be read
* into %eax, so we change %eax. We always return all-ones, which
- * traditionally means "there's nothing there". */
+ * traditionally means "there's nothing there".
+ */
if (in) {
/* Lower bit tells is whether it's a 16 or 32 bit access */
if (insn & 0x1)
@@ -290,7 +340,8 @@
return 1;
}
-/* Our hypercalls mechanism used to be based on direct software interrupts.
+/*
+ * Our hypercalls mechanism used to be based on direct software interrupts.
* After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to
* change over to using kvm hypercalls.
*
@@ -318,16 +369,20 @@
*/
static void rewrite_hypercall(struct lg_cpu *cpu)
{
- /* This are the opcodes we use to patch the Guest. The opcode for "int
+ /*
+ * This are the opcodes we use to patch the Guest. The opcode for "int
* $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we
- * complete the sequence with a NOP (0x90). */
+ * complete the sequence with a NOP (0x90).
+ */
u8 insn[3] = {0xcd, 0x1f, 0x90};
__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
- /* The above write might have caused a copy of that page to be made
+ /*
+ * The above write might have caused a copy of that page to be made
* (if it was read-only). We need to make sure the Guest has
* up-to-date pagetables. As this doesn't happen often, we can just
- * drop them all. */
+ * drop them all.
+ */
guest_pagetable_clear_all(cpu);
}
@@ -335,9 +390,11 @@
{
u8 insn[3];
- /* This must be the Guest kernel trying to do something.
+ /*
+ * This must be the Guest kernel trying to do something.
* The bottom two bits of the CS segment register are the privilege
- * level. */
+ * level.
+ */
if ((cpu->regs->cs & 3) != GUEST_PL)
return false;
@@ -351,86 +408,105 @@
{
switch (cpu->regs->trapnum) {
case 13: /* We've intercepted a General Protection Fault. */
- /* Check if this was one of those annoying IN or OUT
+ /*
+ * Check if this was one of those annoying IN or OUT
* instructions which we need to emulate. If so, we just go
- * back into the Guest after we've done it. */
+ * back into the Guest after we've done it.
+ */
if (cpu->regs->errcode == 0) {
if (emulate_insn(cpu))
return;
}
- /* If KVM is active, the vmcall instruction triggers a
- * General Protection Fault. Normally it triggers an
- * invalid opcode fault (6): */
+ /*
+ * If KVM is active, the vmcall instruction triggers a General
+ * Protection Fault. Normally it triggers an invalid opcode
+ * fault (6):
+ */
case 6:
- /* We need to check if ring == GUEST_PL and
- * faulting instruction == vmcall. */
+ /*
+ * We need to check if ring == GUEST_PL and faulting
+ * instruction == vmcall.
+ */
if (is_hypercall(cpu)) {
rewrite_hypercall(cpu);
return;
}
break;
case 14: /* We've intercepted a Page Fault. */
- /* The Guest accessed a virtual address that wasn't mapped.
+ /*
+ * The Guest accessed a virtual address that wasn't mapped.
* This happens a lot: we don't actually set up most of the page
* tables for the Guest at all when we start: as it runs it asks
* for more and more, and we set them up as required. In this
* case, we don't even tell the Guest that the fault happened.
*
* The errcode tells whether this was a read or a write, and
- * whether kernel or userspace code. */
+ * whether kernel or userspace code.
+ */
if (demand_page(cpu, cpu->arch.last_pagefault,
cpu->regs->errcode))
return;
- /* OK, it's really not there (or not OK): the Guest needs to
+ /*
+ * OK, it's really not there (or not OK): the Guest needs to
* know. We write out the cr2 value so it knows where the
* fault occurred.
*
* Note that if the Guest were really messed up, this could
* happen before it's done the LHCALL_LGUEST_INIT hypercall, so
- * lg->lguest_data could be NULL */
+ * lg->lguest_data could be NULL
+ */
if (cpu->lg->lguest_data &&
put_user(cpu->arch.last_pagefault,
&cpu->lg->lguest_data->cr2))
kill_guest(cpu, "Writing cr2");
break;
case 7: /* We've intercepted a Device Not Available fault. */
- /* If the Guest doesn't want to know, we already restored the
- * Floating Point Unit, so we just continue without telling
- * it. */
+ /*
+ * If the Guest doesn't want to know, we already restored the
+ * Floating Point Unit, so we just continue without telling it.
+ */
if (!cpu->ts)
return;
break;
case 32 ... 255:
- /* These values mean a real interrupt occurred, in which case
+ /*
+ * These values mean a real interrupt occurred, in which case
* the Host handler has already been run. We just do a
* friendly check if another process should now be run, then
- * return to run the Guest again */
+ * return to run the Guest again
+ */
cond_resched();
return;
case LGUEST_TRAP_ENTRY:
- /* Our 'struct hcall_args' maps directly over our regs: we set
- * up the pointer now to indicate a hypercall is pending. */
+ /*
+ * Our 'struct hcall_args' maps directly over our regs: we set
+ * up the pointer now to indicate a hypercall is pending.
+ */
cpu->hcall = (struct hcall_args *)cpu->regs;
return;
}
/* We didn't handle the trap, so it needs to go to the Guest. */
if (!deliver_trap(cpu, cpu->regs->trapnum))
- /* If the Guest doesn't have a handler (either it hasn't
+ /*
+ * If the Guest doesn't have a handler (either it hasn't
* registered any yet, or it's one of the faults we don't let
- * it handle), it dies with this cryptic error message. */
+ * it handle), it dies with this cryptic error message.
+ */
kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
cpu->regs->trapnum, cpu->regs->eip,
cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
: cpu->regs->errcode);
}
-/* Now we can look at each of the routines this calls, in increasing order of
+/*
+ * Now we can look at each of the routines this calls, in increasing order of
* complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
* deliver_trap() and demand_page(). After all those, we'll be ready to
* examine the Switcher, and our philosophical understanding of the Host/Guest
- * duality will be complete. :*/
+ * duality will be complete.
+:*/
static void adjust_pge(void *on)
{
if (on)
@@ -439,13 +515,16 @@
write_cr4(read_cr4() & ~X86_CR4_PGE);
}
-/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
- * some more i386-specific initialization. */
+/*H:020
+ * Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization.
+ */
void __init lguest_arch_host_init(void)
{
int i;
- /* Most of the i386/switcher.S doesn't care that it's been moved; on
+ /*
+ * Most of the i386/switcher.S doesn't care that it's been moved; on
* Intel, jumps are relative, and it doesn't access any references to
* external code or data.
*
@@ -453,7 +532,8 @@
* addresses are placed in a table (default_idt_entries), so we need to
* update the table with the new addresses. switcher_offset() is a
* convenience function which returns the distance between the
- * compiled-in switcher code and the high-mapped copy we just made. */
+ * compiled-in switcher code and the high-mapped copy we just made.
+ */
for (i = 0; i < IDT_ENTRIES; i++)
default_idt_entries[i] += switcher_offset();
@@ -468,63 +548,81 @@
for_each_possible_cpu(i) {
/* lguest_pages() returns this CPU's two pages. */
struct lguest_pages *pages = lguest_pages(i);
- /* This is a convenience pointer to make the code fit one
- * statement to a line. */
+ /* This is a convenience pointer to make the code neater. */
struct lguest_ro_state *state = &pages->state;
- /* The Global Descriptor Table: the Host has a different one
+ /*
+ * The Global Descriptor Table: the Host has a different one
* for each CPU. We keep a descriptor for the GDT which says
* where it is and how big it is (the size is actually the last
- * byte, not the size, hence the "-1"). */
+ * byte, not the size, hence the "-1").
+ */
state->host_gdt_desc.size = GDT_SIZE-1;
state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
- /* All CPUs on the Host use the same Interrupt Descriptor
+ /*
+ * All CPUs on the Host use the same Interrupt Descriptor
* Table, so we just use store_idt(), which gets this CPU's IDT
- * descriptor. */
+ * descriptor.
+ */
store_idt(&state->host_idt_desc);
- /* The descriptors for the Guest's GDT and IDT can be filled
+ /*
+ * The descriptors for the Guest's GDT and IDT can be filled
* out now, too. We copy the GDT & IDT into ->guest_gdt and
- * ->guest_idt before actually running the Guest. */
+ * ->guest_idt before actually running the Guest.
+ */
state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
state->guest_idt_desc.address = (long)&state->guest_idt;
state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
state->guest_gdt_desc.address = (long)&state->guest_gdt;
- /* We know where we want the stack to be when the Guest enters
+ /*
+ * We know where we want the stack to be when the Guest enters
* the Switcher: in pages->regs. The stack grows upwards, so
- * we start it at the end of that structure. */
+ * we start it at the end of that structure.
+ */
state->guest_tss.sp0 = (long)(&pages->regs + 1);
- /* And this is the GDT entry to use for the stack: we keep a
- * couple of special LGUEST entries. */
+ /*
+ * And this is the GDT entry to use for the stack: we keep a
+ * couple of special LGUEST entries.
+ */
state->guest_tss.ss0 = LGUEST_DS;
- /* x86 can have a finegrained bitmap which indicates what I/O
+ /*
+ * x86 can have a finegrained bitmap which indicates what I/O
* ports the process can use. We set it to the end of our
- * structure, meaning "none". */
+ * structure, meaning "none".
+ */
state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
- /* Some GDT entries are the same across all Guests, so we can
- * set them up now. */
+ /*
+ * Some GDT entries are the same across all Guests, so we can
+ * set them up now.
+ */
setup_default_gdt_entries(state);
/* Most IDT entries are the same for all Guests, too.*/
setup_default_idt_entries(state, default_idt_entries);
- /* The Host needs to be able to use the LGUEST segments on this
- * CPU, too, so put them in the Host GDT. */
+ /*
+ * The Host needs to be able to use the LGUEST segments on this
+ * CPU, too, so put them in the Host GDT.
+ */
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
}
- /* In the Switcher, we want the %cs segment register to use the
+ /*
+ * In the Switcher, we want the %cs segment register to use the
* LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
* it will be undisturbed when we switch. To change %cs and jump we
- * need this structure to feed to Intel's "lcall" instruction. */
+ * need this structure to feed to Intel's "lcall" instruction.
+ */
lguest_entry.offset = (long)switch_to_guest + switcher_offset();
lguest_entry.segment = LGUEST_CS;
- /* Finally, we need to turn off "Page Global Enable". PGE is an
+ /*
+ * Finally, we need to turn off "Page Global Enable". PGE is an
* optimization where page table entries are specially marked to show
* they never change. The Host kernel marks all the kernel pages this
* way because it's always present, even when userspace is running.
@@ -534,16 +632,21 @@
* you'll get really weird bugs that you'll chase for two days.
*
* I used to turn PGE off every time we switched to the Guest and back
- * on when we return, but that slowed the Switcher down noticibly. */
+ * on when we return, but that slowed the Switcher down noticibly.
+ */
- /* We don't need the complexity of CPUs coming and going while we're
- * doing this. */
+ /*
+ * We don't need the complexity of CPUs coming and going while we're
+ * doing this.
+ */
get_online_cpus();
if (cpu_has_pge) { /* We have a broader idea of "global". */
/* Remember that this was originally set (for cleanup). */
cpu_had_pge = 1;
- /* adjust_pge is a helper function which sets or unsets the PGE
- * bit on its CPU, depending on the argument (0 == unset). */
+ /*
+ * adjust_pge is a helper function which sets or unsets the PGE
+ * bit on its CPU, depending on the argument (0 == unset).
+ */
on_each_cpu(adjust_pge, (void *)0, 1);
/* Turn off the feature in the global feature set. */
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
@@ -590,26 +693,32 @@
{
u32 tsc_speed;
- /* The pointer to the Guest's "struct lguest_data" is the only argument.
- * We check that address now. */
+ /*
+ * The pointer to the Guest's "struct lguest_data" is the only argument.
+ * We check that address now.
+ */
if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
sizeof(*cpu->lg->lguest_data)))
return -EFAULT;
- /* Having checked it, we simply set lg->lguest_data to point straight
+ /*
+ * Having checked it, we simply set lg->lguest_data to point straight
* into the Launcher's memory at the right place and then use
* copy_to_user/from_user from now on, instead of lgread/write. I put
* this in to show that I'm not immune to writing stupid
- * optimizations. */
+ * optimizations.
+ */
cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1;
- /* We insist that the Time Stamp Counter exist and doesn't change with
+ /*
+ * We insist that the Time Stamp Counter exist and doesn't change with
* cpu frequency. Some devious chip manufacturers decided that TSC
* changes could be handled in software. I decided that time going
* backwards might be good for benchmarks, but it's bad for users.
*
* We also insist that the TSC be stable: the kernel detects unreliable
- * TSCs for its own purposes, and we use that here. */
+ * TSCs for its own purposes, and we use that here.
+ */
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
tsc_speed = tsc_khz;
else
@@ -625,38 +734,47 @@
}
/*:*/
-/*L:030 lguest_arch_setup_regs()
+/*L:030
+ * lguest_arch_setup_regs()
*
* Most of the Guest's registers are left alone: we used get_zeroed_page() to
- * allocate the structure, so they will be 0. */
+ * allocate the structure, so they will be 0.
+ */
void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start)
{
struct lguest_regs *regs = cpu->regs;
- /* There are four "segment" registers which the Guest needs to boot:
+ /*
+ * There are four "segment" registers which the Guest needs to boot:
* The "code segment" register (cs) refers to the kernel code segment
* __KERNEL_CS, and the "data", "extra" and "stack" segment registers
* refer to the kernel data segment __KERNEL_DS.
*
* The privilege level is packed into the lower bits. The Guest runs
- * at privilege level 1 (GUEST_PL).*/
+ * at privilege level 1 (GUEST_PL).
+ */
regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL;
regs->cs = __KERNEL_CS|GUEST_PL;
- /* The "eflags" register contains miscellaneous flags. Bit 1 (0x002)
+ /*
+ * The "eflags" register contains miscellaneous flags. Bit 1 (0x002)
* is supposed to always be "1". Bit 9 (0x200) controls whether
* interrupts are enabled. We always leave interrupts enabled while
- * running the Guest. */
+ * running the Guest.
+ */
regs->eflags = X86_EFLAGS_IF | 0x2;
- /* The "Extended Instruction Pointer" register says where the Guest is
- * running. */
+ /*
+ * The "Extended Instruction Pointer" register says where the Guest is
+ * running.
+ */
regs->eip = start;
- /* %esi points to our boot information, at physical address 0, so don't
- * touch it. */
+ /*
+ * %esi points to our boot information, at physical address 0, so don't
+ * touch it.
+ */
- /* There are a couple of GDT entries the Guest expects when first
- * booting. */
+ /* There are a couple of GDT entries the Guest expects at boot. */
setup_guest_gdt(cpu);
}
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 3fc1531..40634b0 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,12 +1,15 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
- * Host and Guest to do the low-level Guest<->Host switch. It is as simple as
- * it can be made, but it's naturally very specific to x86.
+/*P:900
+ * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride
+ * both the Host and Guest to do the low-level Guest<->Host switch. It is as
+ * simple as it can be made, but it's naturally very specific to x86.
*
* You have now completed Preparation. If this has whet your appetite; if you
* are feeling invigorated and refreshed then the next, more challenging stage
- * can be found in "make Guest". :*/
+ * can be found in "make Guest".
+ :*/
-/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+/*M:012
+ * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
* gain at least 1% more performance. Since neither LOC nor performance can be
* measured beforehand, it generally means implementing a feature then deciding
* if it's worth it. And once it's implemented, who can say no?
@@ -31,11 +34,14 @@
* Host (which is actually really easy).
*
* Two questions remain. Would the performance gain outweigh the complexity?
- * And who would write the verse documenting it? :*/
+ * And who would write the verse documenting it?
+:*/
-/*M:011 Lguest64 handles NMI. This gave me NMI envy (until I looked at their
+/*M:011
+ * Lguest64 handles NMI. This gave me NMI envy (until I looked at their
* code). It's worth doing though, since it would let us use oprofile in the
- * Host when a Guest is running. :*/
+ * Host when a Guest is running.
+:*/
/*S:100
* Welcome to the Switcher itself!
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 6e149f4..a0f6838 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -378,6 +378,17 @@
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
+#ifdef CONFIG_PCI
+ /* Set the DMA ops to the ones from the PCI device, this could be
+ * fishy if we didn't know that on PowerMac it's always direct ops
+ * or iommu ops that will work fine
+ */
+ dev->ofdev.dev.archdata.dma_ops =
+ chip->lbus.pdev->dev.archdata.dma_ops;
+ dev->ofdev.dev.archdata.dma_data =
+ chip->lbus.pdev->dev.archdata.dma_data;
+#endif /* CONFIG_PCI */
+
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 9933eb8..ed10381 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -776,7 +776,7 @@
* But don't wait if split was due to the io size restriction
*/
if (unlikely(out_of_pages))
- congestion_wait(WRITE, HZ/100);
+ congestion_wait(BLK_RW_ASYNC, HZ/100);
/*
* With async crypto it is unsafe to share the crypto context
@@ -1318,7 +1318,7 @@
{
struct crypt_config *cc = ti->private;
- return fn(ti, cc->dev, cc->start, data);
+ return fn(ti, cc->dev, cc->start, ti->len, data);
}
static struct target_type crypt_target = {
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 4e5b843..ebe7381 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -324,12 +324,12 @@
struct delay_c *dc = ti->private;
int ret = 0;
- ret = fn(ti, dc->dev_read, dc->start_read, data);
+ ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data);
if (ret)
goto out;
if (dc->dev_write)
- ret = fn(ti, dc->dev_write, dc->start_write, data);
+ ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data);
out:
return ret;
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index c3ae515..3710ff8 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -195,7 +195,7 @@
struct dm_exception_store **store)
{
int r = 0;
- struct dm_exception_store_type *type;
+ struct dm_exception_store_type *type = NULL;
struct dm_exception_store *tmp_store;
char persistent;
@@ -211,12 +211,15 @@
}
persistent = toupper(*argv[1]);
- if (persistent != 'P' && persistent != 'N') {
+ if (persistent == 'P')
+ type = get_type("P");
+ else if (persistent == 'N')
+ type = get_type("N");
+ else {
ti->error = "Persistent flag is not P or N";
return -EINVAL;
}
- type = get_type(&persistent);
if (!type) {
ti->error = "Exception store type not recognised";
r = -EINVAL;
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 9184b6de..82f7d6e 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -139,7 +139,7 @@
{
struct linear_c *lc = ti->private;
- return fn(ti, lc->dev, lc->start, data);
+ return fn(ti, lc->dev, lc->start, ti->len, data);
}
static struct target_type linear_target = {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c70604a..6f0d90d 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1453,7 +1453,7 @@
list_for_each_entry(pg, &m->priority_groups, list) {
list_for_each_entry(p, &pg->pgpaths, list) {
- ret = fn(ti, p->path.dev, ti->begin, data);
+ ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
if (ret)
goto out;
}
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ce8868c..9726577 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -638,6 +638,7 @@
spin_lock_irq(&ms->lock);
bio_list_merge(&ms->writes, &requeue);
spin_unlock_irq(&ms->lock);
+ delayed_wake(ms);
}
/*
@@ -1292,7 +1293,7 @@
for (i = 0; !ret && i < ms->nr_mirrors; i++)
ret = fn(ti, ms->mirror[i].dev,
- ms->mirror[i].offset, data);
+ ms->mirror[i].offset, ti->len, data);
return ret;
}
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index b240e85..4e0e593 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -320,10 +320,11 @@
int ret = 0;
unsigned i = 0;
- do
+ do {
ret = fn(ti, sc->stripe[i].dev,
- sc->stripe[i].physical_start, data);
- while (!ret && ++i < sc->stripes);
+ sc->stripe[i].physical_start,
+ sc->stripe_width, data);
+ } while (!ret && ++i < sc->stripes);
return ret;
}
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 4899ebe..d952b34 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -346,7 +346,7 @@
* If possible, this checks an area of a destination device is valid.
*/
static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, void *data)
+ sector_t start, sector_t len, void *data)
{
struct queue_limits *limits = data;
struct block_device *bdev = dev->bdev;
@@ -359,7 +359,7 @@
if (!dev_size)
return 1;
- if ((start >= dev_size) || (start + ti->len > dev_size)) {
+ if ((start >= dev_size) || (start + len > dev_size)) {
DMWARN("%s: %s too small for target",
dm_device_name(ti->table->md), bdevname(bdev, b));
return 0;
@@ -377,11 +377,11 @@
return 0;
}
- if (ti->len & (logical_block_size_sectors - 1)) {
+ if (len & (logical_block_size_sectors - 1)) {
DMWARN("%s: len=%llu not aligned to h/w "
"logical block size %hu of %s",
dm_device_name(ti->table->md),
- (unsigned long long)ti->len,
+ (unsigned long long)len,
limits->logical_block_size, bdevname(bdev, b));
return 0;
}
@@ -482,7 +482,7 @@
#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, void *data)
+ sector_t start, sector_t len, void *data)
{
struct queue_limits *limits = data;
struct block_device *bdev = dev->bdev;
@@ -495,7 +495,7 @@
return 0;
}
- if (blk_stack_limits(limits, &q->limits, start) < 0)
+ if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
DMWARN("%s: target device %s is misaligned",
dm_device_name(ti->table->md), bdevname(bdev, b));
@@ -830,11 +830,6 @@
return t->type;
}
-bool dm_table_bio_based(struct dm_table *t)
-{
- return dm_table_get_type(t) == DM_TYPE_BIO_BASED;
-}
-
bool dm_table_request_based(struct dm_table *t)
{
return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3c6d4ee..8a311ea 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1017,7 +1017,7 @@
clone->bi_flags |= 1 << BIO_CLONED;
if (bio_integrity(bio)) {
- bio_integrity_clone(clone, bio, GFP_NOIO);
+ bio_integrity_clone(clone, bio, GFP_NOIO, bs);
bio_integrity_trim(clone,
bio_sector_offset(bio, idx, offset), len);
}
@@ -1045,7 +1045,7 @@
clone->bi_flags &= ~(1 << BIO_SEG_VALID);
if (bio_integrity(bio)) {
- bio_integrity_clone(clone, bio, GFP_NOIO);
+ bio_integrity_clone(clone, bio, GFP_NOIO, bs);
if (idx != bio->bi_idx || clone->bi_size < bio->bi_size)
bio_integrity_trim(clone,
@@ -2203,16 +2203,6 @@
goto out;
}
- /*
- * It is enought that blk_queue_ordered() is called only once when
- * the first bio-based table is bound.
- *
- * This setting should be moved to alloc_dev() when request-based dm
- * supports barrier.
- */
- if (!md->map && dm_table_bio_based(table))
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
-
__unbind(md);
r = __bind(md, table, &limits);
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 23278ae..a7663eb 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -61,7 +61,6 @@
int dm_table_any_busy_target(struct dm_table *t);
int dm_table_set_type(struct dm_table *t);
unsigned dm_table_get_type(struct dm_table *t);
-bool dm_table_bio_based(struct dm_table *t);
bool dm_table_request_based(struct dm_table *t);
int dm_table_alloc_md_mempools(struct dm_table *t);
void dm_table_free_md_mempools(struct dm_table *t);
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 15c8b7b..5fe39c2 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -166,8 +166,8 @@
rdev->sectors = sectors * mddev->chunk_sectors;
}
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -220,6 +220,7 @@
mddev->queue->unplug_fn = linear_unplug;
mddev->queue->backing_dev_info.congested_fn = linear_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
+ md_integrity_register(mddev);
return 0;
}
@@ -256,6 +257,7 @@
rcu_assign_pointer(mddev->private, newconf);
md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
+ revalidate_disk(mddev->gendisk);
call_rcu(&oldconf->rcu, free_conf);
return 0;
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 09be637..103f2d3 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -359,6 +359,7 @@
else
new->md_minor = MINOR(unit) >> MdpMinorShift;
+ mutex_init(&new->open_mutex);
mutex_init(&new->reconfig_mutex);
INIT_LIST_HEAD(&new->disks);
INIT_LIST_HEAD(&new->all_mddevs);
@@ -1308,7 +1309,12 @@
}
if (mddev->level != LEVEL_MULTIPATH) {
int role;
- role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
+ if (rdev->desc_nr < 0 ||
+ rdev->desc_nr >= le32_to_cpu(sb->max_dev)) {
+ role = 0xffff;
+ rdev->desc_nr = -1;
+ } else
+ role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
switch(role) {
case 0xffff: /* spare */
break;
@@ -1394,8 +1400,14 @@
if (rdev2->desc_nr+1 > max_dev)
max_dev = rdev2->desc_nr+1;
- if (max_dev > le32_to_cpu(sb->max_dev))
+ if (max_dev > le32_to_cpu(sb->max_dev)) {
+ int bmask;
sb->max_dev = cpu_to_le32(max_dev);
+ rdev->sb_size = max_dev * 2 + 256;
+ bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
+ if (rdev->sb_size & bmask)
+ rdev->sb_size = (rdev->sb_size | bmask) + 1;
+ }
for (i=0; i<max_dev;i++)
sb->dev_roles[i] = cpu_to_le16(0xfffe);
@@ -1487,37 +1499,76 @@
static LIST_HEAD(pending_raid_disks);
-static void md_integrity_check(mdk_rdev_t *rdev, mddev_t *mddev)
+/*
+ * Try to register data integrity profile for an mddev
+ *
+ * This is called when an array is started and after a disk has been kicked
+ * from the array. It only succeeds if all working and active component devices
+ * are integrity capable with matching profiles.
+ */
+int md_integrity_register(mddev_t *mddev)
{
- struct mdk_personality *pers = mddev->pers;
- struct gendisk *disk = mddev->gendisk;
- struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
- struct blk_integrity *bi_mddev = blk_get_integrity(disk);
+ mdk_rdev_t *rdev, *reference = NULL;
- /* Data integrity passthrough not supported on RAID 4, 5 and 6 */
- if (pers && pers->level >= 4 && pers->level <= 6)
- return;
-
- /* If rdev is integrity capable, register profile for mddev */
- if (!bi_mddev && bi_rdev) {
- if (blk_integrity_register(disk, bi_rdev))
- printk(KERN_ERR "%s: %s Could not register integrity!\n",
- __func__, disk->disk_name);
- else
- printk(KERN_NOTICE "Enabling data integrity on %s\n",
- disk->disk_name);
- return;
+ if (list_empty(&mddev->disks))
+ return 0; /* nothing to do */
+ if (blk_get_integrity(mddev->gendisk))
+ return 0; /* already registered */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ /* skip spares and non-functional disks */
+ if (test_bit(Faulty, &rdev->flags))
+ continue;
+ if (rdev->raid_disk < 0)
+ continue;
+ /*
+ * If at least one rdev is not integrity capable, we can not
+ * enable data integrity for the md device.
+ */
+ if (!bdev_get_integrity(rdev->bdev))
+ return -EINVAL;
+ if (!reference) {
+ /* Use the first rdev as the reference */
+ reference = rdev;
+ continue;
+ }
+ /* does this rdev's profile match the reference profile? */
+ if (blk_integrity_compare(reference->bdev->bd_disk,
+ rdev->bdev->bd_disk) < 0)
+ return -EINVAL;
}
-
- /* Check that mddev and rdev have matching profiles */
- if (blk_integrity_compare(disk, rdev->bdev->bd_disk) < 0) {
- printk(KERN_ERR "%s: %s/%s integrity mismatch!\n", __func__,
- disk->disk_name, rdev->bdev->bd_disk->disk_name);
- printk(KERN_NOTICE "Disabling data integrity on %s\n",
- disk->disk_name);
- blk_integrity_unregister(disk);
+ /*
+ * All component devices are integrity capable and have matching
+ * profiles, register the common profile for the md device.
+ */
+ if (blk_integrity_register(mddev->gendisk,
+ bdev_get_integrity(reference->bdev)) != 0) {
+ printk(KERN_ERR "md: failed to register integrity for %s\n",
+ mdname(mddev));
+ return -EINVAL;
}
+ printk(KERN_NOTICE "md: data integrity on %s enabled\n",
+ mdname(mddev));
+ return 0;
}
+EXPORT_SYMBOL(md_integrity_register);
+
+/* Disable data integrity if non-capable/non-matching disk is being added */
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+ struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
+ struct blk_integrity *bi_mddev = blk_get_integrity(mddev->gendisk);
+
+ if (!bi_mddev) /* nothing to do */
+ return;
+ if (rdev->raid_disk < 0) /* skip spares */
+ return;
+ if (bi_rdev && blk_integrity_compare(mddev->gendisk,
+ rdev->bdev->bd_disk) >= 0)
+ return;
+ printk(KERN_NOTICE "disabling data integrity on %s\n", mdname(mddev));
+ blk_integrity_unregister(mddev->gendisk);
+}
+EXPORT_SYMBOL(md_integrity_add_rdev);
static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev)
{
@@ -1591,7 +1642,6 @@
/* May as well allow recovery to be retried once */
mddev->recovery_disabled = 0;
- md_integrity_check(rdev, mddev);
return 0;
fail:
@@ -1756,9 +1806,10 @@
__u8 *uuid;
uuid = sb->set_uuid;
- printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
- ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
- KERN_INFO "md: Name: \"%s\" CT:%llu\n",
+ printk(KERN_INFO
+ "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x"
+ ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n"
+ "md: Name: \"%s\" CT:%llu\n",
le32_to_cpu(sb->major_version),
le32_to_cpu(sb->feature_map),
uuid[0], uuid[1], uuid[2], uuid[3],
@@ -1770,12 +1821,13 @@
& MD_SUPERBLOCK_1_TIME_SEC_MASK);
uuid = sb->device_uuid;
- printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
+ printk(KERN_INFO
+ "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu"
" RO:%llu\n"
- KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
- ":%02x%02x%02x%02x%02x%02x\n"
- KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
- KERN_INFO "md: (MaxDev:%u) \n",
+ "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x"
+ ":%02x%02x%02x%02x%02x%02x\n"
+ "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n"
+ "md: (MaxDev:%u) \n",
le32_to_cpu(sb->level),
(unsigned long long)le64_to_cpu(sb->size),
le32_to_cpu(sb->raid_disks),
@@ -1923,17 +1975,14 @@
/* otherwise we have to go forward and ... */
mddev->events ++;
if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */
- /* .. if the array isn't clean, insist on an odd 'events' */
- if ((mddev->events&1)==0) {
- mddev->events++;
+ /* .. if the array isn't clean, an 'even' event must also go
+ * to spares. */
+ if ((mddev->events&1)==0)
nospares = 0;
- }
} else {
- /* otherwise insist on an even 'events' (for clean states) */
- if ((mddev->events&1)) {
- mddev->events++;
+ /* otherwise an 'odd' event must go to spares */
+ if ((mddev->events&1))
nospares = 0;
- }
}
}
@@ -2655,6 +2704,7 @@
ssize_t rv = len;
struct mdk_personality *pers;
void *priv;
+ mdk_rdev_t *rdev;
if (mddev->pers == NULL) {
if (len == 0)
@@ -2734,6 +2784,12 @@
mddev_suspend(mddev);
mddev->pers->stop(mddev);
module_put(mddev->pers->owner);
+ /* Invalidate devices that are now superfluous */
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= mddev->raid_disks) {
+ rdev->raid_disk = -1;
+ clear_bit(In_sync, &rdev->flags);
+ }
mddev->pers = pers;
mddev->private = priv;
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
@@ -3543,6 +3599,7 @@
if (max < mddev->resync_min)
return -EINVAL;
if (max < mddev->resync_max &&
+ mddev->ro == 0 &&
test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
return -EBUSY;
@@ -3573,7 +3630,8 @@
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
- if (mddev->pers->quiesce == NULL)
+ if (mddev->pers == NULL ||
+ mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
@@ -3601,7 +3659,8 @@
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
- if (mddev->pers->quiesce == NULL)
+ if (mddev->pers == NULL ||
+ mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
@@ -3681,17 +3740,8 @@
mddev->array_sectors = sectors;
set_capacity(mddev->gendisk, mddev->array_sectors);
- if (mddev->pers) {
- struct block_device *bdev = bdget_disk(mddev->gendisk, 0);
-
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
+ if (mddev->pers)
+ revalidate_disk(mddev->gendisk);
return len;
}
@@ -3844,11 +3894,9 @@
flush_scheduled_work();
mutex_lock(&disks_mutex);
- if (mddev->gendisk) {
- mutex_unlock(&disks_mutex);
- mddev_put(mddev);
- return -EEXIST;
- }
+ error = -EEXIST;
+ if (mddev->gendisk)
+ goto abort;
if (name) {
/* Need to ensure that 'name' is not a duplicate.
@@ -3860,17 +3908,15 @@
if (mddev2->gendisk &&
strcmp(mddev2->gendisk->disk_name, name) == 0) {
spin_unlock(&all_mddevs_lock);
- return -EEXIST;
+ goto abort;
}
spin_unlock(&all_mddevs_lock);
}
+ error = -ENOMEM;
mddev->queue = blk_alloc_queue(GFP_KERNEL);
- if (!mddev->queue) {
- mutex_unlock(&disks_mutex);
- mddev_put(mddev);
- return -ENOMEM;
- }
+ if (!mddev->queue)
+ goto abort;
mddev->queue->queuedata = mddev;
/* Can be unlocked because the queue is new: no concurrency */
@@ -3880,11 +3926,9 @@
disk = alloc_disk(1 << shift);
if (!disk) {
- mutex_unlock(&disks_mutex);
blk_cleanup_queue(mddev->queue);
mddev->queue = NULL;
- mddev_put(mddev);
- return -ENOMEM;
+ goto abort;
}
disk->major = MAJOR(mddev->unit);
disk->first_minor = unit << shift;
@@ -3906,16 +3950,22 @@
mddev->gendisk = disk;
error = kobject_init_and_add(&mddev->kobj, &md_ktype,
&disk_to_dev(disk)->kobj, "%s", "md");
- mutex_unlock(&disks_mutex);
- if (error)
+ if (error) {
+ /* This isn't possible, but as kobject_init_and_add is marked
+ * __must_check, we must do something with the result
+ */
printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
disk->disk_name);
- else {
+ error = 0;
+ }
+ abort:
+ mutex_unlock(&disks_mutex);
+ if (!error) {
kobject_uevent(&mddev->kobj, KOBJ_ADD);
mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state");
}
mddev_put(mddev);
- return 0;
+ return error;
}
static struct kobject *md_probe(dev_t dev, int *part, void *data)
@@ -4044,10 +4094,6 @@
}
strlcpy(mddev->clevel, pers->name, sizeof(mddev->clevel));
- if (pers->level >= 4 && pers->level <= 6)
- /* Cannot support integrity (yet) */
- blk_integrity_unregister(mddev->gendisk);
-
if (mddev->reshape_position != MaxSector &&
pers->start_reshape == NULL) {
/* This personality cannot handle reshaping... */
@@ -4185,6 +4231,7 @@
md_wakeup_thread(mddev->thread);
md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
+ revalidate_disk(mddev->gendisk);
mddev->changed = 1;
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
@@ -4256,12 +4303,11 @@
struct gendisk *disk = mddev->gendisk;
mdk_rdev_t *rdev;
+ mutex_lock(&mddev->open_mutex);
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
- return -EBUSY;
- }
-
- if (mddev->pers) {
+ err = -EBUSY;
+ } else if (mddev->pers) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
@@ -4319,7 +4365,10 @@
set_disk_ro(disk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
-
+out:
+ mutex_unlock(&mddev->open_mutex);
+ if (err)
+ return err;
/*
* Free resources if final stop
*/
@@ -4385,7 +4434,6 @@
blk_integrity_unregister(disk);
md_new_event(mddev);
sysfs_notify_dirent(mddev->sysfs_state);
-out:
return err;
}
@@ -5083,18 +5131,8 @@
return -ENOSPC;
}
rv = mddev->pers->resize(mddev, num_sectors);
- if (!rv) {
- struct block_device *bdev;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
- }
+ if (!rv)
+ revalidate_disk(mddev->gendisk);
return rv;
}
@@ -5480,12 +5518,12 @@
}
BUG_ON(mddev != bdev->bd_disk->private_data);
- if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
+ if ((err = mutex_lock_interruptible(&mddev->open_mutex)))
goto out;
err = 0;
atomic_inc(&mddev->openers);
- mddev_unlock(mddev);
+ mutex_unlock(&mddev->open_mutex);
check_disk_change(bdev);
out:
@@ -6334,10 +6372,16 @@
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
- if (j >= mddev->resync_max)
- wait_event(mddev->recovery_wait,
- mddev->resync_max > j
- || kthread_should_stop());
+ while (j >= mddev->resync_max && !kthread_should_stop()) {
+ /* As this condition is controlled by user-space,
+ * we can block indefinitely, so use '_interruptible'
+ * to avoid triggering warnings.
+ */
+ flush_signals(current); /* just in case */
+ wait_event_interruptible(mddev->recovery_wait,
+ mddev->resync_max > j
+ || kthread_should_stop());
+ }
if (kthread_should_stop())
goto interrupted;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 9430a11..f8fc188 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -223,6 +223,16 @@
* so we don't loop trying */
int in_sync; /* know to not need resync */
+ /* 'open_mutex' avoids races between 'md_open' and 'do_md_stop', so
+ * that we are never stopping an array while it is open.
+ * 'reconfig_mutex' protects all other reconfiguration.
+ * These locks are separate due to conflicting interactions
+ * with bdev->bd_mutex.
+ * Lock ordering is:
+ * reconfig_mutex -> bd_mutex : e.g. do_md_run -> revalidate_disk
+ * bd_mutex -> open_mutex: e.g. __blkdev_get -> md_open
+ */
+ struct mutex open_mutex;
struct mutex reconfig_mutex;
atomic_t active; /* general refcount */
atomic_t openers; /* number of active opens */
@@ -431,5 +441,7 @@
extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
extern int md_check_no_bitmap(mddev_t *mddev);
+extern int md_integrity_register(mddev_t *mddev);
+void md_integrity_add_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
#endif /* _MD_MD_H */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index cbe368f..7140909 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -294,7 +294,8 @@
for (path = first; path <= last; path++)
if ((p=conf->multipaths+path)->rdev == NULL) {
q = rdev->bdev->bd_disk->queue;
- blk_queue_stack_limits(mddev->queue, q);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
@@ -312,6 +313,7 @@
set_bit(In_sync, &rdev->flags);
rcu_assign_pointer(p->rdev, rdev);
err = 0;
+ md_integrity_add_rdev(rdev, mddev);
break;
}
@@ -344,7 +346,9 @@
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
@@ -463,9 +467,9 @@
disk = conf->multipaths + disk_idx;
disk->rdev = rdev;
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, not that we ever expect a device with
* a merge_bvec_fn to be involved in multipath */
@@ -518,7 +522,7 @@
mddev->queue->unplug_fn = multipath_unplug;
mddev->queue->backing_dev_info.congested_fn = multipath_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
-
+ md_integrity_register(mddev);
return 0;
out_free_conf:
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index ab4a489..898e2bd 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -170,8 +170,8 @@
}
dev[j] = rdev1;
- blk_queue_stack_limits(mddev->queue,
- rdev1->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev1->bdev,
+ rdev1->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -250,6 +250,11 @@
mddev->chunk_sectors << 9);
goto abort;
}
+
+ blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
+ blk_queue_io_opt(mddev->queue,
+ (mddev->chunk_sectors << 9) * mddev->raid_disks);
+
printk(KERN_INFO "raid0: done.\n");
mddev->private = conf;
return 0;
@@ -346,6 +351,7 @@
blk_queue_merge_bvec(mddev->queue, raid0_mergeable_bvec);
dump_zones(mddev);
+ md_integrity_register(mddev);
return 0;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 89939a7..8726fd7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1123,8 +1123,8 @@
for (mirror = first; mirror <= last; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -1144,7 +1144,7 @@
rcu_assign_pointer(p->rdev, rdev);
break;
}
-
+ md_integrity_add_rdev(rdev, mddev);
print_conf(conf);
return err;
}
@@ -1178,7 +1178,9 @@
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
@@ -1988,9 +1990,8 @@
disk = conf->mirrors + disk_idx;
disk->rdev = rdev;
-
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -2068,7 +2069,7 @@
mddev->queue->unplug_fn = raid1_unplug;
mddev->queue->backing_dev_info.congested_fn = raid1_congested;
mddev->queue->backing_dev_info.congested_data = mddev;
-
+ md_integrity_register(mddev);
return 0;
out_no_mem:
@@ -2133,6 +2134,7 @@
return -EINVAL;
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
+ revalidate_disk(mddev->gendisk);
if (sectors > mddev->dev_sectors &&
mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->dev_sectors;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index ae12cea..3d9020c 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1151,8 +1151,8 @@
for ( ; mirror <= last ; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -1170,6 +1170,7 @@
break;
}
+ md_integrity_add_rdev(rdev, mddev);
print_conf(conf);
return err;
}
@@ -1203,7 +1204,9 @@
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
+ goto abort;
}
+ md_integrity_register(mddev);
}
abort:
@@ -2044,7 +2047,7 @@
static int run(mddev_t *mddev)
{
conf_t *conf;
- int i, disk_idx;
+ int i, disk_idx, chunk_size;
mirror_info_t *disk;
mdk_rdev_t *rdev;
int nc, fc, fo;
@@ -2130,6 +2133,14 @@
spin_lock_init(&conf->device_lock);
mddev->queue->queue_lock = &conf->device_lock;
+ chunk_size = mddev->chunk_sectors << 9;
+ blk_queue_io_min(mddev->queue, chunk_size);
+ if (conf->raid_disks % conf->near_copies)
+ blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks);
+ else
+ blk_queue_io_opt(mddev->queue, chunk_size *
+ (conf->raid_disks / conf->near_copies));
+
list_for_each_entry(rdev, &mddev->disks, same_set) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -2138,9 +2149,8 @@
disk = conf->mirrors + disk_idx;
disk->rdev = rdev;
-
- blk_queue_stack_limits(mddev->queue,
- rdev->bdev->bd_disk->queue);
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
* violating it, so limit ->max_sector to one PAGE, as
* a one page request is never in violation.
@@ -2218,6 +2228,7 @@
if (conf->near_copies < mddev->raid_disks)
blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
+ md_integrity_register(mddev);
return 0;
out_free_conf:
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f9f991e..b8a2c5d 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3699,13 +3699,21 @@
goto retry;
}
}
- /* FIXME what if we get a false positive because these
- * are being updated.
- */
- if (logical_sector >= mddev->suspend_lo &&
+
+ if (bio_data_dir(bi) == WRITE &&
+ logical_sector >= mddev->suspend_lo &&
logical_sector < mddev->suspend_hi) {
release_stripe(sh);
- schedule();
+ /* As the suspend_* range is controlled by
+ * userspace, we want an interruptible
+ * wait.
+ */
+ flush_signals(current);
+ prepare_to_wait(&conf->wait_for_overlap,
+ &w, TASK_INTERRUPTIBLE);
+ if (logical_sector >= mddev->suspend_lo &&
+ logical_sector < mddev->suspend_hi)
+ schedule();
goto retry;
}
@@ -3777,7 +3785,7 @@
conf->reshape_progress < raid5_size(mddev, 0, 0)) {
sector_nr = raid5_size(mddev, 0, 0)
- conf->reshape_progress;
- } else if (mddev->delta_disks > 0 &&
+ } else if (mddev->delta_disks >= 0 &&
conf->reshape_progress > 0)
sector_nr = conf->reshape_progress;
sector_div(sector_nr, new_data_disks);
@@ -3991,6 +3999,9 @@
return 0;
}
+ /* Allow raid5_quiesce to complete */
+ wait_event(conf->wait_for_overlap, conf->quiesce != 2);
+
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
return reshape_request(mddev, sector_nr, skipped);
@@ -4308,6 +4319,15 @@
return sectors * (raid_disks - conf->max_degraded);
}
+static void free_conf(raid5_conf_t *conf)
+{
+ shrink_stripes(conf);
+ safe_put_page(conf->spare_page);
+ kfree(conf->disks);
+ kfree(conf->stripe_hashtbl);
+ kfree(conf);
+}
+
static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
@@ -4439,11 +4459,7 @@
abort:
if (conf) {
- shrink_stripes(conf);
- safe_put_page(conf->spare_page);
- kfree(conf->disks);
- kfree(conf->stripe_hashtbl);
- kfree(conf);
+ free_conf(conf);
return ERR_PTR(-EIO);
} else
return ERR_PTR(-ENOMEM);
@@ -4452,7 +4468,7 @@
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
- int working_disks = 0;
+ int working_disks = 0, chunk_size;
mdk_rdev_t *rdev;
if (mddev->recovery_cp != MaxSector)
@@ -4493,7 +4509,26 @@
(old_disks-max_degraded));
/* here_old is the first stripe that we might need to read
* from */
- if (here_new >= here_old) {
+ if (mddev->delta_disks == 0) {
+ /* We cannot be sure it is safe to start an in-place
+ * reshape. It is only safe if user-space if monitoring
+ * and taking constant backups.
+ * mdadm always starts a situation like this in
+ * readonly mode so it can take control before
+ * allowing any writes. So just check for that.
+ */
+ if ((here_new * mddev->new_chunk_sectors !=
+ here_old * mddev->chunk_sectors) ||
+ mddev->ro == 0) {
+ printk(KERN_ERR "raid5: in-place reshape must be started"
+ " in read-only mode - aborting\n");
+ return -EINVAL;
+ }
+ } else if (mddev->delta_disks < 0
+ ? (here_new * mddev->new_chunk_sectors <=
+ here_old * mddev->chunk_sectors)
+ : (here_new * mddev->new_chunk_sectors >=
+ here_old * mddev->chunk_sectors)) {
/* Reading from the same stripe as writing to - bad */
printk(KERN_ERR "raid5: reshape_position too early for "
"auto-recovery - aborting.\n");
@@ -4607,18 +4642,22 @@
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+ chunk_size = mddev->chunk_sectors << 9;
+ blk_queue_io_min(mddev->queue, chunk_size);
+ blk_queue_io_opt(mddev->queue, chunk_size *
+ (conf->raid_disks - conf->max_degraded));
+
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
return 0;
abort:
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
if (conf) {
- shrink_stripes(conf);
print_raid5_conf(conf);
- safe_put_page(conf->spare_page);
- kfree(conf->disks);
- kfree(conf->stripe_hashtbl);
- kfree(conf);
+ free_conf(conf);
}
mddev->private = NULL;
printk(KERN_ALERT "raid5: failed to run raid set %s\n", mdname(mddev));
@@ -4633,13 +4672,10 @@
md_unregister_thread(mddev->thread);
mddev->thread = NULL;
- shrink_stripes(conf);
- kfree(conf->stripe_hashtbl);
mddev->queue->backing_dev_info.congested_fn = NULL;
blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
- kfree(conf->disks);
- kfree(conf);
+ free_conf(conf);
mddev->private = NULL;
return 0;
}
@@ -4841,6 +4877,7 @@
return -EINVAL;
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
+ revalidate_disk(mddev->gendisk);
if (sectors > mddev->dev_sectors && mddev->recovery_cp == MaxSector) {
mddev->recovery_cp = mddev->dev_sectors;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
@@ -4986,7 +5023,7 @@
spin_unlock_irqrestore(&conf->device_lock, flags);
}
mddev->raid_disks = conf->raid_disks;
- mddev->reshape_position = 0;
+ mddev->reshape_position = conf->reshape_progress;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -5041,7 +5078,6 @@
*/
static void raid5_finish_reshape(mddev_t *mddev)
{
- struct block_device *bdev;
raid5_conf_t *conf = mddev->private;
if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -5050,15 +5086,7 @@
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
set_capacity(mddev->gendisk, mddev->array_sectors);
mddev->changed = 1;
-
- bdev = bdget_disk(mddev->gendisk, 0);
- if (bdev) {
- mutex_lock(&bdev->bd_inode->i_mutex);
- i_size_write(bdev->bd_inode,
- (loff_t)mddev->array_sectors << 9);
- mutex_unlock(&bdev->bd_inode->i_mutex);
- bdput(bdev);
- }
+ revalidate_disk(mddev->gendisk);
} else {
int d;
mddev->degraded = conf->raid_disks;
@@ -5069,8 +5097,15 @@
mddev->degraded--;
for (d = conf->raid_disks ;
d < conf->raid_disks - mddev->delta_disks;
- d++)
- raid5_remove_disk(mddev, d);
+ d++) {
+ mdk_rdev_t *rdev = conf->disks[d].rdev;
+ if (rdev && raid5_remove_disk(mddev, d) == 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ rdev->raid_disk = -1;
+ }
+ }
}
mddev->layout = conf->algorithm;
mddev->chunk_sectors = conf->chunk_sectors;
@@ -5090,12 +5125,18 @@
case 1: /* stop all writes */
spin_lock_irq(&conf->device_lock);
- conf->quiesce = 1;
+ /* '2' tells resync/reshape to pause so that all
+ * active stripes can drain
+ */
+ conf->quiesce = 2;
wait_event_lock_irq(conf->wait_for_stripe,
atomic_read(&conf->active_stripes) == 0 &&
atomic_read(&conf->active_aligned_reads) == 0,
conf->device_lock, /* nothing */);
+ conf->quiesce = 1;
spin_unlock_irq(&conf->device_lock);
+ /* allow reshape to continue */
+ wake_up(&conf->wait_for_overlap);
break;
case 0: /* re-enable writes */
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index b6da9c38..aa20ce8 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -1096,8 +1096,19 @@
}
/* All S-code tables need a 200kHz shift */
- if (priv->ctrl.demod)
+ if (priv->ctrl.demod) {
demod = priv->ctrl.demod + 200;
+ /*
+ * The DTV7 S-code table needs a 700 kHz shift.
+ * Thanks to Terry Wu <terrywu2009@gmail.com> for reporting this
+ *
+ * DTV7 is only used in Australia. Germany or Italy may also
+ * use this firmware after initialization, but a tune to a UHF
+ * channel should then cause DTV78 to be used.
+ */
+ if (type & DTV7)
+ demod += 500;
+ }
return generic_set_freq(fe, p->frequency,
T_DIGITAL_TV, type, 0, demod);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index efb4a6c..9a6307a 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -20,8 +20,14 @@
#include "tuner-simple.h"
#include "stv0297.h"
+
+/* Can we use the specified front-end? Remember that if we are compiled
+ * into the kernel we can't call code that's in modules. */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+ (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
/* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@
}
#endif
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
- || defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
static int flexcop_sleep(struct dvb_frontend* fe)
{
struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@
#endif
/* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
{
/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -193,10 +198,12 @@
}
return 0;
}
+#else
+#define skystar2_rev23_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
@@ -321,10 +328,12 @@
}
return 0;
}
+#else
+#define skystar2_rev26_attach NULL
#endif
/* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
.demod_address = 0x53,
.invert = 1,
@@ -385,10 +394,12 @@
fc->fc_i2c_adap[0].no_base_addr = 0;
return 0;
}
+#else
+#define skystar2_rev27_attach NULL
#endif
/* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
static struct cx24123_config skystar2_rev2_8_cx24123_config = {
.demod_address = 0x55,
.dont_use_pll = 1,
@@ -433,10 +444,12 @@
* IR-receiver (PIC16F818) - but the card has no input for that ??? */
return 1;
}
+#else
+#define skystar2_rev28_attach NULL
#endif
/* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
{
static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -495,10 +508,12 @@
}
return 0;
}
+#else
+#define airstar_dvbt_attach NULL
#endif
/* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
const struct firmware **fw, char* name)
{
@@ -517,10 +532,12 @@
fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
return fc->fe != NULL;
}
+#else
+#define airstar_atsc1_attach NULL
#endif
/* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
static struct nxt200x_config samsung_tbmv_config = {
.demod_address = 0x0a,
};
@@ -535,10 +552,12 @@
return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
DVB_PLL_SAMSUNG_TBMV);
}
+#else
+#define airstar_atsc2_attach NULL
#endif
/* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
@@ -556,10 +575,12 @@
return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
TUNER_LG_TDVS_H06XF);
}
+#else
+#define airstar_atsc3_attach NULL
#endif
/* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
@@ -698,39 +719,23 @@
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
return 1;
}
+#else
+#define cablestar2_attach NULL
#endif
static struct {
flexcop_device_type_t type;
int (*attach)(struct flexcop_device *, struct i2c_adapter *);
} flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
};
/* try to figure out the frontend */
@@ -738,6 +743,8 @@
{
int i;
for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+ if (!flexcop_frontends[i].attach)
+ continue;
/* type needs to be set before, because of some workarounds
* done based on the probed card type */
fc->dev_type = flexcop_frontends[i].type;
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 4601b05..0e246ea 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/dvb/ca.h>
#include "dvbdev.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 7992730..487919b 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -27,7 +27,6 @@
#include <linux/poll.h>
#include <linux/fs.h>
#include <linux/list.h>
-#include <linux/smp_lock.h>
#define DVB_MAJOR 212
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 136c586..12e018b 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -527,6 +527,10 @@
u8 i, buf[3] = {0, 0, 0};
*auto_mode = 0; /* set if parameters are requested to auto set */
+ /* Try auto-detect transmission parameters in case of AUTO requested or
+ garbage parameters given by application for compatibility.
+ MPlayer seems to provide garbage parameters currently. */
+
switch (params->transmission_mode) {
case TRANSMISSION_MODE_AUTO:
*auto_mode = 1;
@@ -536,7 +540,8 @@
buf[0] |= (1 << 0);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid transmission_mode\n", __func__);
+ *auto_mode = 1;
}
switch (params->guard_interval) {
@@ -554,7 +559,8 @@
buf[0] |= (3 << 2);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid guard_interval\n", __func__);
+ *auto_mode = 1;
}
switch (params->hierarchy_information) {
@@ -572,7 +578,8 @@
buf[0] |= (3 << 4);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid hierarchy_information\n", __func__);
+ *auto_mode = 1;
};
switch (params->constellation) {
@@ -587,7 +594,8 @@
buf[1] |= (2 << 6);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid constellation\n", __func__);
+ *auto_mode = 1;
}
/* Use HP. How and which case we can switch to LP? */
@@ -611,7 +619,8 @@
buf[2] |= (4 << 0);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid code_rate_HP\n", __func__);
+ *auto_mode = 1;
}
switch (params->code_rate_LP) {
@@ -638,7 +647,8 @@
if (params->hierarchy_information == HIERARCHY_AUTO)
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid code_rate_LP\n", __func__);
+ *auto_mode = 1;
}
switch (params->bandwidth) {
@@ -651,7 +661,8 @@
buf[1] |= (2 << 2);
break;
default:
- return -EINVAL;
+ deb_info("%s: invalid bandwidth\n", __func__);
+ buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */
}
/* program */
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 68eb449..d8d4214 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,5 +1,6 @@
config TTPCI_EEPROM
tristate
+ depends on I2C
default n
config DVB_AV7110
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d1d959e..8d65c65 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -36,7 +36,6 @@
#include <linux/fs.h>
#include <linux/timer.h>
#include <linux/poll.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/sched.h>
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 837467f..575bf9d 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,6 +58,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 640421c..e85f318 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -127,6 +127,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/hid.h>
@@ -1200,7 +1201,7 @@
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
- goto done;
+ goto unlock;
}
/* stop rds reception */
@@ -1213,9 +1214,8 @@
retval = si470x_stop(radio);
usb_autopm_put_interface(radio->intf);
}
-
+unlock:
mutex_unlock(&radio->disconnect_lock);
-
done:
return retval;
}
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 061e147..84b6fc1 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -312,6 +312,14 @@
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 7fb3add..9f2e321 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -69,6 +69,7 @@
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o
obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index fdb4adf..ca6558c 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3324,8 +3324,6 @@
/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
- int addr=ADDR_UNSET;
-
btv->tuner_type = UNSET;
if (BTTV_BOARD_UNKNOWN == btv->c.type) {
@@ -3470,9 +3468,6 @@
btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
- if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
- addr = bttv_tvcards[btv->c.type].tuner_addr;
-
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
if (UNSET == btv->tuner_type)
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
@@ -3496,40 +3491,6 @@
if (UNSET == btv->tuner_type)
btv->tuner_type = TUNER_ABSENT;
- if (btv->tuner_type != TUNER_ABSENT) {
- struct tuner_setup tun_setup;
-
- /* Load tuner module before issuing tuner config call! */
- if (bttv_tvcards[btv->c.type].has_radio)
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_RADIO));
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
- v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, "tuner", "tuner",
- v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
- tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
- tun_setup.type = btv->tuner_type;
- tun_setup.addr = addr;
-
- if (bttv_tvcards[btv->c.type].has_radio)
- tun_setup.mode_mask |= T_RADIO;
-
- bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
- }
-
- if (btv->tda9887_conf) {
- struct v4l2_priv_tun_config tda9887_cfg;
-
- tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &btv->tda9887_conf;
-
- bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
- }
-
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
@@ -3540,15 +3501,15 @@
btv->has_remote = remote[btv->c.nr];
if (bttv_tvcards[btv->c.type].has_radio)
- btv->has_radio=1;
+ btv->has_radio = 1;
if (bttv_tvcards[btv->c.type].has_remote)
- btv->has_remote=1;
+ btv->has_remote = 1;
if (!bttv_tvcards[btv->c.type].no_gpioirq)
- btv->gpioirq=1;
+ btv->gpioirq = 1;
if (bttv_tvcards[btv->c.type].volume_gpio)
- btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+ btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
- btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+ btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
if (btv->tuner_type == TUNER_ABSENT)
return; /* no tuner or related drivers to load */
@@ -3666,6 +3627,49 @@
}
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+ int addr = ADDR_UNSET;
+
+ if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+ addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+ if (btv->tuner_type != TUNER_ABSENT) {
+ struct tuner_setup tun_setup;
+
+ /* Load tuner module before issuing tuner config call! */
+ if (bttv_tvcards[btv->c.type].has_radio)
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+ &btv->c.i2c_adap, "tuner", "tuner",
+ v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+ tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.type = btv->tuner_type;
+ tun_setup.addr = addr;
+
+ if (bttv_tvcards[btv->c.type].has_radio)
+ tun_setup.mode_mask |= T_RADIO;
+
+ bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+ }
+
+ if (btv->tda9887_conf) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &btv->tda9887_conf;
+
+ bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+ }
+}
+
/* ----------------------------------------------------------------------- */
static void modtec_eeprom(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5eb1464..8cc6dd2 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -41,6 +41,7 @@
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include "bttvp.h"
@@ -4418,6 +4419,7 @@
/* some card-specific stuff (needs working i2c) */
bttv_init_card2(btv);
+ bttv_init_tuner(btv);
init_irqreg(btv);
/* register video4linux + input */
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 3d36daf..3ec2402 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -283,6 +283,7 @@
extern void bttv_idcard(struct bttv *btv);
extern void bttv_init_card1(struct bttv *btv);
extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
/* card-specific funtions */
extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index c92a250..36f2d76 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -198,11 +198,14 @@
static const struct cx18_card cx18_card_mpc718 = {
.type = CX18_CARD_YUAN_MPC718,
- .name = "Yuan MPC718",
- .comment = "Analog video capture works; some audio line in may not.\n",
+ .name = "Yuan MPC718 MiniPCI DVB-T/Analog",
+ .comment = "Experimenters needed for device to work well.\n"
+ "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
- .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL,
+ .hw_muxer = CX18_HW_GPIO_MUX,
+ .hw_all = CX18_HW_418_AV | CX18_HW_TUNER |
+ CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
.video_inputs = {
{ CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 },
{ CX18_CARD_INPUT_SVIDEO1, 1,
@@ -211,27 +214,34 @@
{ CX18_CARD_INPUT_SVIDEO2, 2,
CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
- { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 },
- { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 },
- { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 },
+ { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 },
+ { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 },
},
- .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 },
.tuners = {
/* XC3028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
+ /* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
.ddr = {
- /* Probably Samsung K4D263238G-VC33 memory */
- .chip_config = 0x003,
- .refresh = 0x30c,
- .timing1 = 0x23230b73,
- .timing2 = 0x08,
+ /* Hynix HY5DU283222B DDR RAM */
+ .chip_config = 0x303,
+ .refresh = 0x3bd,
+ .timing1 = 0x36320966,
+ .timing2 = 0x1f,
.tune_lane = 0,
.initial_emrs = 2,
},
+ .gpio_init.initial_value = 0x1,
+ .gpio_init.direction = 0x3,
+ /* FIXME - these GPIO's are just guesses */
+ .gpio_audio_input = { .mask = 0x3,
+ .tuner = 0x1,
+ .linein = 0x3,
+ .radio = 0x1 },
.xceive_pin = 0,
.pci_list = cx18_pci_mpc718,
.i2c = &cx18_i2c_std,
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6ea3fe6..51a0c33 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -30,6 +30,10 @@
#include "s5h1409.h"
#include "mxl5005s.h"
#include "zl10353.h"
+
+#include <linux/firmware.h>
+#include "mt352.h"
+#include "mt352_priv.h"
#include "tuner-xc2028.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
@@ -38,6 +42,11 @@
#define CX18_CLOCK_ENABLE2 0xc71024
#define CX18_DMUX_CLK_MASK 0x0080
+/*
+ * CX18_CARD_HVR_1600_ESMT
+ * CX18_CARD_HVR_1600_SAMSUNG
+ */
+
static struct mxl5005s_config hauppauge_hvr1600_tuner = {
.i2c_address = 0xC6 >> 1,
.if_freq = IF_FREQ_5380000HZ,
@@ -65,6 +74,9 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
+/*
+ * CX18_CARD_LEADTEK_DVR3100H
+ */
/* Information/confirmation of proper config values provided by Terry Wu */
static struct zl10353_config leadtek_dvr3100h_demod = {
.demod_address = 0x1e >> 1, /* Datasheet suggested straps */
@@ -74,6 +86,121 @@
.disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
};
+/*
+ * CX18_CARD_YUAN_MPC718
+ */
+/*
+ * Due to
+ *
+ * 1. an absence of information on how to prgram the MT352
+ * 2. the Linux mt352 module pushing MT352 initialzation off onto us here
+ *
+ * We have to use an init sequence that *you* must extract from the Windows
+ * driver (yuanrap.sys) and which we load as a firmware.
+ *
+ * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual
+ * with chip programming details, then I can remove this annoyance.
+ */
+static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
+ const struct firmware **fw)
+{
+ struct cx18 *cx = stream->cx;
+ const char *fn = "dvb-cx18-mpc718-mt352.fw";
+ int ret;
+
+ ret = request_firmware(fw, fn, &cx->pci_dev->dev);
+ if (ret)
+ CX18_ERR("Unable to open firmware file %s\n", fn);
+ else {
+ size_t sz = (*fw)->size;
+ if (sz < 2 || sz > 64 || (sz % 2) != 0) {
+ CX18_ERR("Firmware %s has a bad size: %lu bytes\n",
+ fn, (unsigned long) sz);
+ ret = -EILSEQ;
+ release_firmware(*fw);
+ *fw = NULL;
+ }
+ }
+
+ if (ret) {
+ CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
+ "demodualtor will not work without it\n");
+ CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
+ "mpc718' if you need the firmware\n");
+ }
+ return ret;
+}
+
+static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
+{
+ struct cx18_dvb *dvb = container_of(fe->dvb,
+ struct cx18_dvb, dvb_adapter);
+ struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+ const struct firmware *fw = NULL;
+ int ret;
+ int i;
+ u8 buf[3];
+
+ ret = yuan_mpc718_mt352_reqfw(stream, &fw);
+ if (ret)
+ return ret;
+
+ /* Loop through all the register-value pairs in the firmware file */
+ for (i = 0; i < fw->size; i += 2) {
+ buf[0] = fw->data[i];
+ /* Intercept a few registers we want to set ourselves */
+ switch (buf[0]) {
+ case TRL_NOMINAL_RATE_0:
+ /* Set our custom OFDM bandwidth in the case below */
+ break;
+ case TRL_NOMINAL_RATE_1:
+ /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */
+ /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */
+ /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */
+ buf[1] = 0x72;
+ buf[2] = 0x49;
+ mt352_write(fe, buf, 3);
+ break;
+ case INPUT_FREQ_0:
+ /* Set our custom IF in the case below */
+ break;
+ case INPUT_FREQ_1:
+ /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */
+ buf[1] = 0x31;
+ buf[2] = 0xc0;
+ mt352_write(fe, buf, 3);
+ break;
+ default:
+ /* Pass through the register-value pair from the fw */
+ buf[1] = fw->data[i+1];
+ mt352_write(fe, buf, 2);
+ break;
+ }
+ }
+
+ buf[0] = (u8) TUNER_GO;
+ buf[1] = 0x01; /* Go */
+ mt352_write(fe, buf, 2);
+ release_firmware(fw);
+ return 0;
+}
+
+static struct mt352_config yuan_mpc718_mt352_demod = {
+ .demod_address = 0x1e >> 1,
+ .adc_clock = 20480, /* 20.480 MHz */
+ .if2 = 4560, /* 4.560 MHz */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .demod_init = yuan_mpc718_mt352_init,
+};
+
+static struct zl10353_config yuan_mpc718_zl10353_demod = {
+ .demod_address = 0x1e >> 1, /* Datasheet suggested straps */
+ .if2 = 45600, /* 4.560 MHz IF from the XC3028 */
+ .parallel_ts = 1, /* Not a serial TS */
+ .no_tuner = 1, /* XC3028 is not behind the gate */
+ .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */
+};
+
static int dvb_register(struct cx18_stream *stream);
/* Kernel DVB framework calls this when the feed needs to start.
@@ -113,6 +240,7 @@
break;
case CX18_CARD_LEADTEK_DVR3100H:
+ case CX18_CARD_YUAN_MPC718:
default:
/* Assumption - Parallel transport - Signalling
* undefined or default.
@@ -326,6 +454,38 @@
fe->ops.tuner_ops.set_config(fe, &ctrl);
}
break;
+ case CX18_CARD_YUAN_MPC718:
+ /*
+ * TODO
+ * Apparently, these cards also could instead have a
+ * DiBcom demod supported by one of the db7000 drivers
+ */
+ dvb->fe = dvb_attach(mt352_attach,
+ &yuan_mpc718_mt352_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe == NULL)
+ dvb->fe = dvb_attach(zl10353_attach,
+ &yuan_mpc718_zl10353_demod,
+ &cx->i2c_adap[1]);
+ if (dvb->fe != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &cx->i2c_adap[1],
+ .i2c_addr = 0xc2 >> 1,
+ .ctrl = NULL,
+ };
+ static struct xc2028_ctrl ctrl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ .type = XC2028_AUTO,
+ };
+
+ fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctrl);
+ }
+ break;
default:
/* No Digital Tv Support */
break;
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 2943bfd3..e0cf21e 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,6 +31,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/smp_lock.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/cx2341x.h>
@@ -57,7 +58,8 @@
#define dprintk(level, fmt, arg...)\
do { if (v4l_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+ printk(KERN_DEBUG "%s: " fmt, \
+ (dev) ? dev->name : "cx23885[?]", ## arg); \
} while (0)
static struct cx23885_tvnorm cx23885_tvnorms[] = {
@@ -1676,6 +1678,7 @@
.read = mpeg_read,
.poll = mpeg_poll,
.mmap = mpeg_mmap,
+ .ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 48a9751..86ac529 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -463,6 +463,30 @@
.if_khz = 5380,
};
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *param)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ switch (param->u.vsb.modulation) {
+ case VSB_8:
+ cx23885_gpio_clear(dev, GPIO_5);
+ break;
+ case QAM_64:
+ case QAM_256:
+ default:
+ cx23885_gpio_set(dev, GPIO_5);
+ break;
+ }
+ break;
+ }
+ return (port->set_frontend_save) ?
+ port->set_frontend_save(fe, param) : -ENODEV;
+}
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -502,6 +526,12 @@
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_hvr127x_config);
}
+
+ /* FIXME: temporary hack */
+ /* define bridge override to set_frontend */
+ port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+ fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
i2c_bus = &dev->i2c_bus[0];
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 70836af..5d60933 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,6 +26,7 @@
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/kthread.h>
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 1a2ac51..214a55e 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -288,6 +288,10 @@
/* Allow a single tsport to have multiple frontends */
u32 num_frontends;
void *port_priv;
+
+ /* FIXME: temporary hack */
+ int (*set_frontend_save) (struct dvb_frontend *,
+ struct dvb_frontend_parameters *);
};
struct cx23885_dev {
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 44eacfb..356d689 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/smp_lock.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/cx2341x.h>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b127708..2bb54c3 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,6 +31,7 @@
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ec2f45d..0664d11 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 16a5af3..6524b49 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -8,6 +8,8 @@
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+
---help---
This is a video4linux driver for Empia 28xx based TV cards.
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c43fdb9..320f1f6 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -157,6 +157,20 @@
{ -1, -1, -1, -1},
};
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+ {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
+
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
@@ -191,18 +205,27 @@
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
- .name = "Unknown EM2750/EM2751 webcam grabber",
+ .name = "EM2710/EM2750/EM2751 webcam grabber",
.xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
} },
},
[EM2800_BOARD_UNKNOWN] = {
@@ -224,13 +247,15 @@
[EM2820_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/28xx video grabber",
.tuner_type = TUNER_ABSENT,
+ .is_webcam = 1, /* To enable sensor probe */
},
[EM2750_BOARD_DLCW_130] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "Huaqi DLCW-130",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
@@ -431,13 +456,25 @@
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
+ [EM2820_BOARD_SILVERCREST_WEBCAM] = {
+ .name = "Silvercrest Webcam 1.3mpix",
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
+ } },
+ },
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -479,7 +516,8 @@
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "NetGMBH Cam",
.valid = EM28XX_BOARD_NOT_VALIDATED,
- .tuner_type = TUNER_ABSENT, /* This is a webcam */
+ .tuner_type = TUNER_ABSENT,
+ .is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
@@ -826,7 +864,7 @@
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
- .dvb_gpio = default_analog,
+ .dvb_gpio = default_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1229,25 +1267,26 @@
},
[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = pinnacle_hybrid_pro_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
- .gpio = default_analog,
+ .gpio = pinnacle_hybrid_pro_analog,
} },
},
[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -1617,6 +1656,7 @@
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+ {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
@@ -1639,6 +1679,11 @@
I2C_CLIENT_END
};
+static unsigned short mt9v011_addrs[] = {
+ 0xba >> 1,
+ I2C_CLIENT_END
+};
+
static unsigned short msp3400_addrs[] = {
0x80 >> 1,
0x88 >> 1,
@@ -1678,6 +1723,91 @@
EM28XX_I2C_FREQ_100_KHZ;
}
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, },
+ { 0x0d, 0x00, 0x00, },
+ { 0x04, 0x05, 0x00, }, /* hres = 1280 */
+ { 0x03, 0x04, 0x00, }, /* vres = 1024 */
+ { 0x20, 0x11, 0x00, },
+ { 0x06, 0x00, 0x10, },
+ { 0x2b, 0x00, 0x24, },
+ { 0x2e, 0x00, 0x24, },
+ { 0x35, 0x00, 0x24, },
+ { 0x2d, 0x00, 0x20, },
+ { 0x2c, 0x00, 0x20, },
+ { 0x09, 0x0a, 0xd4, },
+ { 0x35, 0x00, 0x57, },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+
+ return 0;
+}
+
+/* HINT method: webcam I2C chips
+ *
+ * This method work for webcams with Micron sensors
+ */
+static int em28xx_hint_sensor(struct em28xx *dev)
+{
+ int rc;
+ char *sensor_name;
+ unsigned char cmd;
+ __be16 version_be;
+ u16 version;
+
+ dev->i2c_client.addr = 0xba >> 1;
+ cmd = 0;
+ i2c_master_send(&dev->i2c_client, &cmd, 1);
+ rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
+ if (rc != 2)
+ return -EINVAL;
+
+ version = be16_to_cpu(version_be);
+
+ switch (version) {
+ case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */
+ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
+ sensor_name = "mt9v011";
+ dev->em28xx_sensor = EM28XX_MT9V011;
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 480;
+ dev->sensor_xtal = 6300000;
+
+ /* probably means GRGB 16 bit bayer */
+ dev->vinmode = 0x0d;
+ dev->vinctl = 0x00;
+
+ break;
+ case 0x8431:
+ dev->model = EM2750_BOARD_UNKNOWN;
+ sensor_name = "mt9m001";
+ dev->em28xx_sensor = EM28XX_MT9M001;
+ em28xx_initialize_mt9m001(dev);
+ dev->sensor_xres = 1280;
+ dev->sensor_yres = 1024;
+
+ /* probably means BGGR 16 bit bayer */
+ dev->vinmode = 0x0c;
+ dev->vinctl = 0x00;
+
+ break;
+ default:
+ printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
+ return -EINVAL;
+ }
+
+ em28xx_errdev("Sensor is %s, using model %s entry.\n",
+ sensor_name, em28xx_boards[dev->model].name);
+
+ return 0;
+}
+
/* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
@@ -1706,7 +1836,7 @@
em28xx_info("chip ID is em2750\n");
break;
case CHIP_ID_EM2820:
- em28xx_info("chip ID is em2820\n");
+ em28xx_info("chip ID is em2710 or em2820\n");
break;
case CHIP_ID_EM2840:
em28xx_info("chip ID is em2840\n");
@@ -1860,6 +1990,7 @@
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
@@ -2156,8 +2287,13 @@
em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
so make the call now so the analog GPIOs are set properly
before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
+ case EM2820_BOARD_SILVERCREST_WEBCAM:
+ /* FIXME: need to document the registers bellow */
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ em28xx_write_reg(dev, 0x13, 0x08);
}
if (dev->board.has_snapshot_button)
@@ -2189,6 +2325,15 @@
v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvp5150", "tvp5150", tvp5150_addrs);
+ if (dev->em28xx_sensor == EM28XX_MT9V011) {
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+ v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+ }
+
+
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvaudio", "tvaudio", dev->board.tvaudio_addr);
@@ -2333,6 +2478,20 @@
return errCode;
}
+ /*
+ * Default format, used for tvp5150 or saa711x output formats
+ */
+ dev->vinmode = 0x10;
+ dev->vinctl = 0x11;
+
+ /*
+ * If the device can be a webcam, seek for a sensor.
+ * If sensor is not found, then it isn't a webcam.
+ */
+ if (dev->board.is_webcam)
+ if (em28xx_hint_sensor(dev) < 0)
+ dev->board.is_webcam = 0;
+
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
@@ -2573,6 +2732,7 @@
retval = em28xx_init_dev(&dev, udev, interface, nr);
if (retval) {
em28xx_devused &= ~(1<<dev->devno);
+ mutex_unlock(&dev->lock);
kfree(dev);
goto err;
}
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index c8d7ce8..5b78e19 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -650,15 +650,15 @@
int ret;
ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
- dev->format->reg | 0x20, 0x3f);
+ dev->format->reg | 0x20, 0xff);
+ if (ret < 0)
+ return ret;
+
+ ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
if (ret < 0)
return ret;
- ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
- if (ret < 0)
- return ret;
-
- return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
+ return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl);
}
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -695,13 +695,16 @@
{
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
- if (dev->board.is_em2800)
+
+ if (dev->board.is_em2800) {
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
- else {
+ } else {
u8 buf[2];
+
buf[0] = h;
buf[1] = h >> 8;
em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
buf[0] = v;
buf[1] = v >> 8;
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
@@ -720,8 +723,11 @@
height = norm_maxh(dev) >> 1;
em28xx_set_outfmt(dev);
+
+
em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index e7b47c8..cf0ac7f 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -31,6 +31,8 @@
#include "lgdt330x.h"
#include "zl10353.h"
#include "s5h1409.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -243,6 +245,14 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
+static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
+ .parallel_ts = 1,
+ .if2 = 45600,
+};
+
#ifdef EM28XX_DRX397XD_SUPPORT
/* [TODO] djh - not sure yet what the device config needs to contain */
static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
@@ -250,6 +260,41 @@
};
#endif
+static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+{
+ /* Values extracted from a USB trace of the Terratec Windows driver */
+ static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c };
+ static u8 reset[] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 };
+ static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
+ static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+ static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
+ static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
+ static u8 tuner_go[] = { TUNER_GO, 0x01};
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
+ mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+ mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg));
+ mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg));
+ mt352_write(fe, tuner_go, sizeof(tuner_go));
+ return 0;
+}
+
+static struct mt352_config terratec_xs_mt352_cfg = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+ .if2 = 45600,
+ .demod_init = mt352_terratec_xs_init,
+};
+
/* ------------------------------------------------------------------ */
static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -432,8 +477,6 @@
goto out_free;
}
break;
- case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
- case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_KWORLD_DVB_310U:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
@@ -444,6 +487,33 @@
goto out_free;
}
break;
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ dvb->frontend = dvb_attach(zl10353_attach,
+ &em28xx_zl10353_xc3028_no_i2c_gate,
+ &dev->i2c_adap);
+ if (attach_xc3028(0x61, dev) < 0) {
+ result = -EINVAL;
+ goto out_free;
+ }
+ break;
+ case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+ dvb->frontend = dvb_attach(zl10353_attach,
+ &em28xx_zl10353_xc3028_no_i2c_gate,
+ &dev->i2c_adap);
+ if (dvb->frontend == NULL) {
+ /* This board could have either a zl10353 or a mt352.
+ If the chip id isn't for zl10353, try mt352 */
+ dvb->frontend = dvb_attach(mt352_attach,
+ &terratec_xs_mt352_cfg,
+ &dev->i2c_adap);
+ }
+
+ if (attach_xc3028(0x61, dev) < 0) {
+ result = -EINVAL;
+ goto out_free;
+ }
+ break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_EVGA_INDTUBE:
dvb->frontend = dvb_attach(s5h1409_attach,
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 2c86fcf..27e33a2 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -483,7 +483,7 @@
[0xa0 >> 1] = "eeprom",
[0xb0 >> 1] = "tda9874",
[0xb8 >> 1] = "tvp5150a",
- [0xba >> 1] = "tvp5150a",
+ [0xba >> 1] = "webcam sensor or tvp5150a",
[0xc0 >> 1] = "tuner (analog)",
[0xc2 >> 1] = "tuner (analog)",
[0xc4 >> 1] = "tuner (analog)",
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8fe1bee..ff37b4c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -90,10 +90,35 @@
/* supported video standards */
static struct em28xx_fmt format[] = {
{
- .name = "16bpp YUY2, 4:2:2, packed",
+ .name = "16 bpp YUY2, 4:2:2, packed",
.fourcc = V4L2_PIX_FMT_YUYV,
.depth = 16,
.reg = EM28XX_OUTFMT_YUV422_Y0UY1V,
+ }, {
+ .name = "16 bpp RGB 565, LE",
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .depth = 16,
+ .reg = EM28XX_OUTFMT_RGB_16_656,
+ }, {
+ .name = "8 bpp Bayer BGBG..GRGR",
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .depth = 8,
+ .reg = EM28XX_OUTFMT_RGB_8_BGBG,
+ }, {
+ .name = "8 bpp Bayer GRGR..BGBG",
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .depth = 8,
+ .reg = EM28XX_OUTFMT_RGB_8_GRGR,
+ }, {
+ .name = "8 bpp Bayer GBGB..RGRG",
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .depth = 8,
+ .reg = EM28XX_OUTFMT_RGB_8_GBGB,
+ }, {
+ .name = "12 bpp YUV411",
+ .fourcc = V4L2_PIX_FMT_YUV411P,
+ .depth = 12,
+ .reg = EM28XX_OUTFMT_YUV411,
},
};
@@ -632,8 +657,8 @@
unsigned int width, unsigned int height,
unsigned int *hscale, unsigned int *vscale)
{
- unsigned int maxw = norm_maxw(dev);
- unsigned int maxh = norm_maxh(dev);
+ unsigned int maxw = norm_maxw(dev);
+ unsigned int maxh = norm_maxh(dev);
*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
if (*hscale >= 0x4000)
@@ -733,13 +758,34 @@
return 0;
}
+static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
+ unsigned width, unsigned height)
+{
+ struct em28xx_fmt *fmt;
+
+ fmt = format_by_fourcc(fourcc);
+ if (!fmt)
+ return -EINVAL;
+
+ dev->format = fmt;
+ dev->width = width;
+ dev->height = height;
+
+ /* set new image size */
+ get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
+
+ em28xx_set_alternate(dev);
+ em28xx_resolution_set(dev);
+
+ return 0;
+}
+
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
int rc;
- struct em28xx_fmt *fmt;
rc = check_dev(dev);
if (rc < 0)
@@ -749,12 +795,6 @@
vidioc_try_fmt_vid_cap(file, priv, f);
- fmt = format_by_fourcc(f->fmt.pix.pixelformat);
- if (!fmt) {
- rc = -EINVAL;
- goto out;
- }
-
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
em28xx_errdev("%s queue busy\n", __func__);
rc = -EBUSY;
@@ -767,16 +807,8 @@
goto out;
}
- /* set new image size */
- dev->width = f->fmt.pix.width;
- dev->height = f->fmt.pix.height;
- dev->format = fmt;
- get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
-
- em28xx_set_alternate(dev);
- em28xx_resolution_set(dev);
-
- rc = 0;
+ rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat,
+ f->fmt.pix.width, f->fmt.pix.height);
out:
mutex_unlock(&dev->lock);
@@ -1616,11 +1648,6 @@
filp->private_data = fh;
if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
- dev->width = norm_maxw(dev);
- dev->height = norm_maxh(dev);
- dev->hscale = 0;
- dev->vscale = 0;
-
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
em28xx_set_alternate(dev);
em28xx_resolution_set(dev);
@@ -1962,15 +1989,14 @@
/* set default norm */
dev->norm = em28xx_video_template.current_norm;
- dev->width = norm_maxw(dev);
- dev->height = norm_maxh(dev);
dev->interlaced = EM28XX_INTERLACED_DEFAULT;
- dev->hscale = 0;
- dev->vscale = 0;
dev->ctl_input = 0;
/* Analog specific initialization */
dev->format = &format[0];
+ em28xx_set_video_format(dev, format[0].fourcc,
+ norm_maxw(dev), norm_maxh(dev));
+
video_mux(dev, dev->ctl_input);
/* Audio defaults */
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 813ce45..45bd513 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -107,6 +107,7 @@
#define EM2860_BOARD_TERRATEC_AV350 68
#define EM2882_BOARD_KWORLD_ATSC_315U 69
#define EM2882_BOARD_EVGA_INDTUBE 70
+#define EM2820_BOARD_SILVERCREST_WEBCAM 71
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -357,11 +358,17 @@
#define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
enum em28xx_decoder {
- EM28XX_NODECODER,
+ EM28XX_NODECODER = 0,
EM28XX_TVP5150,
EM28XX_SAA711X,
};
+enum em28xx_sensor {
+ EM28XX_NOSENSOR = 0,
+ EM28XX_MT9V011,
+ EM28XX_MT9M001,
+};
+
enum em28xx_adecoder {
EM28XX_NOADECODER = 0,
EM28XX_TVAUDIO,
@@ -388,6 +395,7 @@
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int has_snapshot_button:1;
+ unsigned int is_webcam:1;
unsigned int valid:1;
unsigned char xclk, i2c_speed;
@@ -471,6 +479,14 @@
struct v4l2_device v4l2_dev;
struct em28xx_board board;
+ /* Webcam specific fields */
+ enum em28xx_sensor em28xx_sensor;
+ int sensor_xres, sensor_yres;
+ int sensor_xtal;
+
+ /* Vinmode/Vinctl used at the driver */
+ int vinmode, vinctl;
+
unsigned int stream_on:1; /* Locks streams */
unsigned int has_audio_class:1;
unsigned int has_alsa_audio:1;
@@ -751,17 +767,23 @@
/*FIXME: maxw should be dependent of alt mode */
static inline unsigned int norm_maxw(struct em28xx *dev)
{
+ if (dev->board.is_webcam)
+ return dev->sensor_xres;
+
if (dev->board.max_range_640_480)
return 640;
- else
- return 720;
+
+ return 720;
}
static inline unsigned int norm_maxh(struct em28xx *dev)
{
+ if (dev->board.is_webcam)
+ return dev->sensor_yres;
+
if (dev->board.max_range_640_480)
return 480;
- else
- return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
+
+ return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
}
#endif
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 578dc4f..34f46f2 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -102,6 +102,22 @@
To compile this driver as a module, choose M here: the
module will be called gspca_pac7311.
+config USB_GSPCA_SN9C20X
+ tristate "SN9C20X USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the
+ sn9c20x chips (SN9C201 and SN9C202).
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_sn9c20x.
+
+config USB_GSPCA_SN9C20X_EVDEV
+ bool "Enable evdev support"
+ depends on USB_GSPCA_SN9C20X
+ ---help---
+ Say Y here in order to enable evdev support for sn9c20x webcam button.
+
config USB_GSPCA_SONIXB
tristate "SONIX Bayer USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 8a6643e..f6d3b86 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o
obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o
obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o
obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o
obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o
obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o
@@ -35,6 +36,7 @@
gspca_ov534-objs := ov534.o
gspca_pac207-objs := pac207.o
gspca_pac7311-objs := pac7311.o
+gspca_sn9c20x-objs := sn9c20x.o
gspca_sonixb-objs := sonixb.o
gspca_sonixj-objs := sonixj.o
gspca_spca500-objs := spca500.o
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 219cfa6..8d48ea1 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -846,6 +846,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 1e89600..b8561df 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -727,6 +727,74 @@
return -EINVAL;
}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+ struct v4l2_dbg_register *reg)
+{
+ int ret;
+ struct gspca_dev *gspca_dev = priv;
+
+ if (!gspca_dev->sd_desc->get_chip_ident)
+ return -EINVAL;
+
+ if (!gspca_dev->sd_desc->get_register)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
+ if (gspca_dev->present)
+ ret = gspca_dev->sd_desc->get_register(gspca_dev, reg);
+ else
+ ret = -ENODEV;
+ mutex_unlock(&gspca_dev->usb_lock);
+
+ return ret;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+ struct v4l2_dbg_register *reg)
+{
+ int ret;
+ struct gspca_dev *gspca_dev = priv;
+
+ if (!gspca_dev->sd_desc->get_chip_ident)
+ return -EINVAL;
+
+ if (!gspca_dev->sd_desc->set_register)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
+ if (gspca_dev->present)
+ ret = gspca_dev->sd_desc->set_register(gspca_dev, reg);
+ else
+ ret = -ENODEV;
+ mutex_unlock(&gspca_dev->usb_lock);
+
+ return ret;
+}
+#endif
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ int ret;
+ struct gspca_dev *gspca_dev = priv;
+
+ if (!gspca_dev->sd_desc->get_chip_ident)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
+ if (gspca_dev->present)
+ ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip);
+ else
+ ret = -ENODEV;
+ mutex_unlock(&gspca_dev->usb_lock);
+
+ return ret;
+}
+
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_fmtdesc *fmtdesc)
{
@@ -1883,6 +1951,11 @@
.vidioc_s_parm = vidioc_s_parm,
.vidioc_s_std = vidioc_s_std,
.vidioc_enum_framesizes = vidioc_enum_framesizes,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
+#endif
+ .vidioc_g_chip_ident = vidioc_g_chip_ident,
#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index bd1faff..46c4eff 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -69,6 +69,10 @@
typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
typedef int (*cam_jpg_op) (struct gspca_dev *,
struct v4l2_jpegcompression *);
+typedef int (*cam_reg_op) (struct gspca_dev *,
+ struct v4l2_dbg_register *);
+typedef int (*cam_ident_op) (struct gspca_dev *,
+ struct v4l2_dbg_chip_ident *);
typedef int (*cam_streamparm_op) (struct gspca_dev *,
struct v4l2_streamparm *);
typedef int (*cam_qmnu_op) (struct gspca_dev *,
@@ -105,6 +109,11 @@
cam_qmnu_op querymenu;
cam_streamparm_op get_streamparm;
cam_streamparm_op set_streamparm;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ cam_reg_op set_register;
+ cam_reg_op get_register;
+#endif
+ cam_ident_op get_chip_ident;
};
/* packet types when moving from iso buf to frame buf */
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 191bcd7..0163903 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -476,9 +476,6 @@
err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
if (err < 0)
return err;
- err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
- if (err < 0)
- return err;
err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
if (err < 0)
@@ -524,9 +521,6 @@
err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
if (err < 0)
return err;
- err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
- if (err < 0)
- return err;
err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
if (err < 0)
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 75e8d14..de769ca 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -201,6 +201,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
new file mode 100644
index 0000000..fcfbbd3
--- /dev/null
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -0,0 +1,2434 @@
+/*
+ * Sonix sn9c201 sn9c202 library
+ * Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com>
+ * Copyright (C) 2009 Brian Johnson <brijohn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/usb/input.h>
+#include <linux/input.h>
+#endif
+
+#include "gspca.h"
+#include "jpeg.h"
+
+#include <media/v4l2-chip-ident.h>
+
+MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
+ "microdia project <microdia@googlegroups.com>");
+MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+#define MODULE_NAME "sn9c20x"
+
+#define MODE_RAW 0x10
+#define MODE_JPEG 0x20
+#define MODE_SXGA 0x80
+
+#define SENSOR_OV9650 0
+#define SENSOR_OV9655 1
+#define SENSOR_SOI968 2
+#define SENSOR_OV7660 3
+#define SENSOR_OV7670 4
+#define SENSOR_MT9V011 5
+#define SENSOR_MT9V111 6
+#define SENSOR_MT9V112 7
+#define SENSOR_MT9M001 8
+#define SENSOR_MT9M111 9
+#define SENSOR_HV7131R 10
+#define SENSOR_MT9VPRB 20
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev;
+
+#define MIN_AVG_LUM 80
+#define MAX_AVG_LUM 130
+ atomic_t avg_lum;
+ u8 old_step;
+ u8 older_step;
+ u8 exposure_step;
+
+ u8 brightness;
+ u8 contrast;
+ u8 saturation;
+ s16 hue;
+ u8 gamma;
+ u8 red;
+ u8 blue;
+
+ u8 hflip;
+ u8 vflip;
+ u8 gain;
+ u16 exposure;
+ u8 auto_exposure;
+
+ u8 i2c_addr;
+ u8 sensor;
+ u8 hstart;
+ u8 vstart;
+
+ u8 *jpeg_hdr;
+ u8 quality;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+ struct input_dev *input_dev;
+ u8 input_gpio;
+ struct task_struct *input_task;
+#endif
+};
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+ {
+#define BRIGHTNESS_IDX 0
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define BRIGHTNESS_DEFAULT 0x7f
+ .default_value = BRIGHTNESS_DEFAULT,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+#define CONTRAST_IDX 1
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define CONTRAST_DEFAULT 0x7f
+ .default_value = CONTRAST_DEFAULT,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ {
+#define SATURATION_IDX 2
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define SATURATION_DEFAULT 0x7f
+ .default_value = SATURATION_DEFAULT,
+ },
+ .set = sd_setsaturation,
+ .get = sd_getsaturation,
+ },
+ {
+#define HUE_IDX 3
+ {
+ .id = V4L2_CID_HUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Hue",
+ .minimum = -180,
+ .maximum = 180,
+ .step = 1,
+#define HUE_DEFAULT 0
+ .default_value = HUE_DEFAULT,
+ },
+ .set = sd_sethue,
+ .get = sd_gethue,
+ },
+ {
+#define GAMMA_IDX 4
+ {
+ .id = V4L2_CID_GAMMA,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gamma",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+#define GAMMA_DEFAULT 0x10
+ .default_value = GAMMA_DEFAULT,
+ },
+ .set = sd_setgamma,
+ .get = sd_getgamma,
+ },
+ {
+#define BLUE_IDX 5
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue Balance",
+ .minimum = 0,
+ .maximum = 0x7f,
+ .step = 1,
+#define BLUE_DEFAULT 0x28
+ .default_value = BLUE_DEFAULT,
+ },
+ .set = sd_setbluebalance,
+ .get = sd_getbluebalance,
+ },
+ {
+#define RED_IDX 6
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red Balance",
+ .minimum = 0,
+ .maximum = 0x7f,
+ .step = 1,
+#define RED_DEFAULT 0x28
+ .default_value = RED_DEFAULT,
+ },
+ .set = sd_setredbalance,
+ .get = sd_getredbalance,
+ },
+ {
+#define HFLIP_IDX 7
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Horizontal Flip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define HFLIP_DEFAULT 0
+ .default_value = HFLIP_DEFAULT,
+ },
+ .set = sd_sethflip,
+ .get = sd_gethflip,
+ },
+ {
+#define VFLIP_IDX 8
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vertical Flip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define VFLIP_DEFAULT 0
+ .default_value = VFLIP_DEFAULT,
+ },
+ .set = sd_setvflip,
+ .get = sd_getvflip,
+ },
+ {
+#define EXPOSURE_IDX 9
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 0x1780,
+ .step = 1,
+#define EXPOSURE_DEFAULT 0x33
+ .default_value = EXPOSURE_DEFAULT,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ {
+#define GAIN_IDX 10
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 28,
+ .step = 1,
+#define GAIN_DEFAULT 0x00
+ .default_value = GAIN_DEFAULT,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ {
+#define AUTOGAIN_IDX 11
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Exposure",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTO_EXPOSURE_DEFAULT 1
+ .default_value = AUTO_EXPOSURE_DEFAULT,
+ },
+ .set = sd_setautoexposure,
+ .get = sd_getautoexposure,
+ },
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0 | MODE_JPEG},
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0 | MODE_RAW},
+ {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1 | MODE_JPEG},
+ {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW},
+ {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2 | MODE_JPEG},
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2 | MODE_RAW},
+ {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+};
+
+static const struct v4l2_pix_format sxga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0 | MODE_JPEG},
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0 | MODE_RAW},
+ {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 240,
+ .sizeimage = 240 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1 | MODE_JPEG},
+ {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW},
+ {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 480,
+ .sizeimage = 480 * 240 ,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2 | MODE_JPEG},
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2 | MODE_RAW},
+ {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+ .bytesperline = 960,
+ .sizeimage = 960 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+ {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 1280,
+ .sizeimage = (1280 * 1024) + 64,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 3 | MODE_RAW | MODE_SXGA},
+};
+
+static const int hsv_red_x[] = {
+ 41, 44, 46, 48, 50, 52, 54, 56,
+ 58, 60, 62, 64, 66, 68, 70, 72,
+ 74, 76, 78, 80, 81, 83, 85, 87,
+ 88, 90, 92, 93, 95, 97, 98, 100,
+ 101, 102, 104, 105, 107, 108, 109, 110,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 123, 124, 125, 125,
+ 126, 127, 127, 128, 128, 129, 129, 129,
+ 130, 130, 130, 130, 131, 131, 131, 131,
+ 131, 131, 131, 131, 130, 130, 130, 130,
+ 129, 129, 129, 128, 128, 127, 127, 126,
+ 125, 125, 124, 123, 122, 122, 121, 120,
+ 119, 118, 117, 116, 115, 114, 112, 111,
+ 110, 109, 107, 106, 105, 103, 102, 101,
+ 99, 98, 96, 94, 93, 91, 90, 88,
+ 86, 84, 83, 81, 79, 77, 75, 74,
+ 72, 70, 68, 66, 64, 62, 60, 58,
+ 56, 54, 52, 49, 47, 45, 43, 41,
+ 39, 36, 34, 32, 30, 28, 25, 23,
+ 21, 19, 16, 14, 12, 9, 7, 5,
+ 3, 0, -1, -3, -6, -8, -10, -12,
+ -15, -17, -19, -22, -24, -26, -28, -30,
+ -33, -35, -37, -39, -41, -44, -46, -48,
+ -50, -52, -54, -56, -58, -60, -62, -64,
+ -66, -68, -70, -72, -74, -76, -78, -80,
+ -81, -83, -85, -87, -88, -90, -92, -93,
+ -95, -97, -98, -100, -101, -102, -104, -105,
+ -107, -108, -109, -110, -112, -113, -114, -115,
+ -116, -117, -118, -119, -120, -121, -122, -123,
+ -123, -124, -125, -125, -126, -127, -127, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -127, -127, -126, -125, -125, -124, -123,
+ -122, -122, -121, -120, -119, -118, -117, -116,
+ -115, -114, -112, -111, -110, -109, -107, -106,
+ -105, -103, -102, -101, -99, -98, -96, -94,
+ -93, -91, -90, -88, -86, -84, -83, -81,
+ -79, -77, -75, -74, -72, -70, -68, -66,
+ -64, -62, -60, -58, -56, -54, -52, -49,
+ -47, -45, -43, -41, -39, -36, -34, -32,
+ -30, -28, -25, -23, -21, -19, -16, -14,
+ -12, -9, -7, -5, -3, 0, 1, 3,
+ 6, 8, 10, 12, 15, 17, 19, 22,
+ 24, 26, 28, 30, 33, 35, 37, 39, 41
+};
+
+static const int hsv_red_y[] = {
+ 82, 80, 78, 76, 74, 73, 71, 69,
+ 67, 65, 63, 61, 58, 56, 54, 52,
+ 50, 48, 46, 44, 41, 39, 37, 35,
+ 32, 30, 28, 26, 23, 21, 19, 16,
+ 14, 12, 10, 7, 5, 3, 0, -1,
+ -3, -6, -8, -10, -13, -15, -17, -19,
+ -22, -24, -26, -29, -31, -33, -35, -38,
+ -40, -42, -44, -46, -48, -51, -53, -55,
+ -57, -59, -61, -63, -65, -67, -69, -71,
+ -73, -75, -77, -79, -81, -82, -84, -86,
+ -88, -89, -91, -93, -94, -96, -98, -99,
+ -101, -102, -104, -105, -106, -108, -109, -110,
+ -112, -113, -114, -115, -116, -117, -119, -120,
+ -120, -121, -122, -123, -124, -125, -126, -126,
+ -127, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -128, -128, -128, -128, -128, -128, -128, -128,
+ -127, -127, -126, -125, -125, -124, -123, -122,
+ -121, -120, -119, -118, -117, -116, -115, -114,
+ -113, -111, -110, -109, -107, -106, -105, -103,
+ -102, -100, -99, -97, -96, -94, -92, -91,
+ -89, -87, -85, -84, -82, -80, -78, -76,
+ -74, -73, -71, -69, -67, -65, -63, -61,
+ -58, -56, -54, -52, -50, -48, -46, -44,
+ -41, -39, -37, -35, -32, -30, -28, -26,
+ -23, -21, -19, -16, -14, -12, -10, -7,
+ -5, -3, 0, 1, 3, 6, 8, 10,
+ 13, 15, 17, 19, 22, 24, 26, 29,
+ 31, 33, 35, 38, 40, 42, 44, 46,
+ 48, 51, 53, 55, 57, 59, 61, 63,
+ 65, 67, 69, 71, 73, 75, 77, 79,
+ 81, 82, 84, 86, 88, 89, 91, 93,
+ 94, 96, 98, 99, 101, 102, 104, 105,
+ 106, 108, 109, 110, 112, 113, 114, 115,
+ 116, 117, 119, 120, 120, 121, 122, 123,
+ 124, 125, 126, 126, 127, 128, 128, 129,
+ 129, 130, 130, 131, 131, 131, 131, 132,
+ 132, 132, 132, 132, 132, 132, 132, 132,
+ 132, 132, 132, 131, 131, 131, 130, 130,
+ 130, 129, 129, 128, 127, 127, 126, 125,
+ 125, 124, 123, 122, 121, 120, 119, 118,
+ 117, 116, 115, 114, 113, 111, 110, 109,
+ 107, 106, 105, 103, 102, 100, 99, 97,
+ 96, 94, 92, 91, 89, 87, 85, 84, 82
+};
+
+static const int hsv_green_x[] = {
+ -124, -124, -125, -125, -125, -125, -125, -125,
+ -125, -126, -126, -125, -125, -125, -125, -125,
+ -125, -124, -124, -124, -123, -123, -122, -122,
+ -121, -121, -120, -120, -119, -118, -117, -117,
+ -116, -115, -114, -113, -112, -111, -110, -109,
+ -108, -107, -105, -104, -103, -102, -100, -99,
+ -98, -96, -95, -93, -92, -91, -89, -87,
+ -86, -84, -83, -81, -79, -77, -76, -74,
+ -72, -70, -69, -67, -65, -63, -61, -59,
+ -57, -55, -53, -51, -49, -47, -45, -43,
+ -41, -39, -37, -35, -33, -30, -28, -26,
+ -24, -22, -20, -18, -15, -13, -11, -9,
+ -7, -4, -2, 0, 1, 3, 6, 8,
+ 10, 12, 14, 17, 19, 21, 23, 25,
+ 27, 29, 32, 34, 36, 38, 40, 42,
+ 44, 46, 48, 50, 52, 54, 56, 58,
+ 60, 62, 64, 66, 68, 70, 71, 73,
+ 75, 77, 78, 80, 82, 83, 85, 87,
+ 88, 90, 91, 93, 94, 96, 97, 98,
+ 100, 101, 102, 104, 105, 106, 107, 108,
+ 109, 111, 112, 113, 113, 114, 115, 116,
+ 117, 118, 118, 119, 120, 120, 121, 122,
+ 122, 123, 123, 124, 124, 124, 125, 125,
+ 125, 125, 125, 125, 125, 126, 126, 125,
+ 125, 125, 125, 125, 125, 124, 124, 124,
+ 123, 123, 122, 122, 121, 121, 120, 120,
+ 119, 118, 117, 117, 116, 115, 114, 113,
+ 112, 111, 110, 109, 108, 107, 105, 104,
+ 103, 102, 100, 99, 98, 96, 95, 93,
+ 92, 91, 89, 87, 86, 84, 83, 81,
+ 79, 77, 76, 74, 72, 70, 69, 67,
+ 65, 63, 61, 59, 57, 55, 53, 51,
+ 49, 47, 45, 43, 41, 39, 37, 35,
+ 33, 30, 28, 26, 24, 22, 20, 18,
+ 15, 13, 11, 9, 7, 4, 2, 0,
+ -1, -3, -6, -8, -10, -12, -14, -17,
+ -19, -21, -23, -25, -27, -29, -32, -34,
+ -36, -38, -40, -42, -44, -46, -48, -50,
+ -52, -54, -56, -58, -60, -62, -64, -66,
+ -68, -70, -71, -73, -75, -77, -78, -80,
+ -82, -83, -85, -87, -88, -90, -91, -93,
+ -94, -96, -97, -98, -100, -101, -102, -104,
+ -105, -106, -107, -108, -109, -111, -112, -113,
+ -113, -114, -115, -116, -117, -118, -118, -119,
+ -120, -120, -121, -122, -122, -123, -123, -124, -124
+};
+
+static const int hsv_green_y[] = {
+ -100, -99, -98, -97, -95, -94, -93, -91,
+ -90, -89, -87, -86, -84, -83, -81, -80,
+ -78, -76, -75, -73, -71, -70, -68, -66,
+ -64, -63, -61, -59, -57, -55, -53, -51,
+ -49, -48, -46, -44, -42, -40, -38, -36,
+ -34, -32, -30, -27, -25, -23, -21, -19,
+ -17, -15, -13, -11, -9, -7, -4, -2,
+ 0, 1, 3, 5, 7, 9, 11, 14,
+ 16, 18, 20, 22, 24, 26, 28, 30,
+ 32, 34, 36, 38, 40, 42, 44, 46,
+ 48, 50, 52, 54, 56, 58, 59, 61,
+ 63, 65, 67, 68, 70, 72, 74, 75,
+ 77, 78, 80, 82, 83, 85, 86, 88,
+ 89, 90, 92, 93, 95, 96, 97, 98,
+ 100, 101, 102, 103, 104, 105, 106, 107,
+ 108, 109, 110, 111, 112, 112, 113, 114,
+ 115, 115, 116, 116, 117, 117, 118, 118,
+ 119, 119, 119, 120, 120, 120, 120, 120,
+ 121, 121, 121, 121, 121, 121, 120, 120,
+ 120, 120, 120, 119, 119, 119, 118, 118,
+ 117, 117, 116, 116, 115, 114, 114, 113,
+ 112, 111, 111, 110, 109, 108, 107, 106,
+ 105, 104, 103, 102, 100, 99, 98, 97,
+ 95, 94, 93, 91, 90, 89, 87, 86,
+ 84, 83, 81, 80, 78, 76, 75, 73,
+ 71, 70, 68, 66, 64, 63, 61, 59,
+ 57, 55, 53, 51, 49, 48, 46, 44,
+ 42, 40, 38, 36, 34, 32, 30, 27,
+ 25, 23, 21, 19, 17, 15, 13, 11,
+ 9, 7, 4, 2, 0, -1, -3, -5,
+ -7, -9, -11, -14, -16, -18, -20, -22,
+ -24, -26, -28, -30, -32, -34, -36, -38,
+ -40, -42, -44, -46, -48, -50, -52, -54,
+ -56, -58, -59, -61, -63, -65, -67, -68,
+ -70, -72, -74, -75, -77, -78, -80, -82,
+ -83, -85, -86, -88, -89, -90, -92, -93,
+ -95, -96, -97, -98, -100, -101, -102, -103,
+ -104, -105, -106, -107, -108, -109, -110, -111,
+ -112, -112, -113, -114, -115, -115, -116, -116,
+ -117, -117, -118, -118, -119, -119, -119, -120,
+ -120, -120, -120, -120, -121, -121, -121, -121,
+ -121, -121, -120, -120, -120, -120, -120, -119,
+ -119, -119, -118, -118, -117, -117, -116, -116,
+ -115, -114, -114, -113, -112, -111, -111, -110,
+ -109, -108, -107, -106, -105, -104, -103, -102, -100
+};
+
+static const int hsv_blue_x[] = {
+ 112, 113, 114, 114, 115, 116, 117, 117,
+ 118, 118, 119, 119, 120, 120, 120, 121,
+ 121, 121, 122, 122, 122, 122, 122, 122,
+ 122, 122, 122, 122, 122, 122, 121, 121,
+ 121, 120, 120, 120, 119, 119, 118, 118,
+ 117, 116, 116, 115, 114, 113, 113, 112,
+ 111, 110, 109, 108, 107, 106, 105, 104,
+ 103, 102, 100, 99, 98, 97, 95, 94,
+ 93, 91, 90, 88, 87, 85, 84, 82,
+ 80, 79, 77, 76, 74, 72, 70, 69,
+ 67, 65, 63, 61, 60, 58, 56, 54,
+ 52, 50, 48, 46, 44, 42, 40, 38,
+ 36, 34, 32, 30, 28, 26, 24, 22,
+ 19, 17, 15, 13, 11, 9, 7, 5,
+ 2, 0, -1, -3, -5, -7, -9, -12,
+ -14, -16, -18, -20, -22, -24, -26, -28,
+ -31, -33, -35, -37, -39, -41, -43, -45,
+ -47, -49, -51, -53, -54, -56, -58, -60,
+ -62, -64, -66, -67, -69, -71, -73, -74,
+ -76, -78, -79, -81, -83, -84, -86, -87,
+ -89, -90, -92, -93, -94, -96, -97, -98,
+ -99, -101, -102, -103, -104, -105, -106, -107,
+ -108, -109, -110, -111, -112, -113, -114, -114,
+ -115, -116, -117, -117, -118, -118, -119, -119,
+ -120, -120, -120, -121, -121, -121, -122, -122,
+ -122, -122, -122, -122, -122, -122, -122, -122,
+ -122, -122, -121, -121, -121, -120, -120, -120,
+ -119, -119, -118, -118, -117, -116, -116, -115,
+ -114, -113, -113, -112, -111, -110, -109, -108,
+ -107, -106, -105, -104, -103, -102, -100, -99,
+ -98, -97, -95, -94, -93, -91, -90, -88,
+ -87, -85, -84, -82, -80, -79, -77, -76,
+ -74, -72, -70, -69, -67, -65, -63, -61,
+ -60, -58, -56, -54, -52, -50, -48, -46,
+ -44, -42, -40, -38, -36, -34, -32, -30,
+ -28, -26, -24, -22, -19, -17, -15, -13,
+ -11, -9, -7, -5, -2, 0, 1, 3,
+ 5, 7, 9, 12, 14, 16, 18, 20,
+ 22, 24, 26, 28, 31, 33, 35, 37,
+ 39, 41, 43, 45, 47, 49, 51, 53,
+ 54, 56, 58, 60, 62, 64, 66, 67,
+ 69, 71, 73, 74, 76, 78, 79, 81,
+ 83, 84, 86, 87, 89, 90, 92, 93,
+ 94, 96, 97, 98, 99, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111, 112
+};
+
+static const int hsv_blue_y[] = {
+ -11, -13, -15, -17, -19, -21, -23, -25,
+ -27, -29, -31, -33, -35, -37, -39, -41,
+ -43, -45, -46, -48, -50, -52, -54, -55,
+ -57, -59, -61, -62, -64, -66, -67, -69,
+ -71, -72, -74, -75, -77, -78, -80, -81,
+ -83, -84, -86, -87, -88, -90, -91, -92,
+ -93, -95, -96, -97, -98, -99, -100, -101,
+ -102, -103, -104, -105, -106, -106, -107, -108,
+ -109, -109, -110, -111, -111, -112, -112, -113,
+ -113, -114, -114, -114, -115, -115, -115, -115,
+ -116, -116, -116, -116, -116, -116, -116, -116,
+ -116, -115, -115, -115, -115, -114, -114, -114,
+ -113, -113, -112, -112, -111, -111, -110, -110,
+ -109, -108, -108, -107, -106, -105, -104, -103,
+ -102, -101, -100, -99, -98, -97, -96, -95,
+ -94, -93, -91, -90, -89, -88, -86, -85,
+ -84, -82, -81, -79, -78, -76, -75, -73,
+ -71, -70, -68, -67, -65, -63, -62, -60,
+ -58, -56, -55, -53, -51, -49, -47, -45,
+ -44, -42, -40, -38, -36, -34, -32, -30,
+ -28, -26, -24, -22, -20, -18, -16, -14,
+ -12, -10, -8, -6, -4, -2, 0, 1,
+ 3, 5, 7, 9, 11, 13, 15, 17,
+ 19, 21, 23, 25, 27, 29, 31, 33,
+ 35, 37, 39, 41, 43, 45, 46, 48,
+ 50, 52, 54, 55, 57, 59, 61, 62,
+ 64, 66, 67, 69, 71, 72, 74, 75,
+ 77, 78, 80, 81, 83, 84, 86, 87,
+ 88, 90, 91, 92, 93, 95, 96, 97,
+ 98, 99, 100, 101, 102, 103, 104, 105,
+ 106, 106, 107, 108, 109, 109, 110, 111,
+ 111, 112, 112, 113, 113, 114, 114, 114,
+ 115, 115, 115, 115, 116, 116, 116, 116,
+ 116, 116, 116, 116, 116, 115, 115, 115,
+ 115, 114, 114, 114, 113, 113, 112, 112,
+ 111, 111, 110, 110, 109, 108, 108, 107,
+ 106, 105, 104, 103, 102, 101, 100, 99,
+ 98, 97, 96, 95, 94, 93, 91, 90,
+ 89, 88, 86, 85, 84, 82, 81, 79,
+ 78, 76, 75, 73, 71, 70, 68, 67,
+ 65, 63, 62, 60, 58, 56, 55, 53,
+ 51, 49, 47, 45, 44, 42, 40, 38,
+ 36, 34, 32, 30, 28, 26, 24, 22,
+ 20, 18, 16, 14, 12, 10, 8, 6,
+ 4, 2, 0, -1, -3, -5, -7, -9, -11
+};
+
+static u16 i2c_ident[] = {
+ V4L2_IDENT_OV9650,
+ V4L2_IDENT_OV9655,
+ V4L2_IDENT_SOI968,
+ V4L2_IDENT_OV7660,
+ V4L2_IDENT_OV7670,
+ V4L2_IDENT_MT9V011,
+ V4L2_IDENT_MT9V111,
+ V4L2_IDENT_MT9V112,
+ V4L2_IDENT_MT9M001C12ST,
+ V4L2_IDENT_MT9M111,
+ V4L2_IDENT_HV7131R,
+};
+
+static u16 bridge_init[][2] = {
+ {0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c},
+ {0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40},
+ {0x1068, 0x30}, {0x1069, 0x20}, {0x106a, 0x10},
+ {0x106b, 0x08}, {0x1188, 0x87}, {0x11a1, 0x00},
+ {0x11a2, 0x00}, {0x11a3, 0x6a}, {0x11a4, 0x50},
+ {0x11ab, 0x00}, {0x11ac, 0x00}, {0x11ad, 0x50},
+ {0x11ae, 0x3c}, {0x118a, 0x04}, {0x0395, 0x04},
+ {0x11b8, 0x3a}, {0x118b, 0x0e}, {0x10f7, 0x05},
+ {0x10f8, 0x14}, {0x10fa, 0xff}, {0x10f9, 0x00},
+ {0x11ba, 0x0a}, {0x11a5, 0x2d}, {0x11a6, 0x2d},
+ {0x11a7, 0x3a}, {0x11a8, 0x05}, {0x11a9, 0x04},
+ {0x11aa, 0x3f}, {0x11af, 0x28}, {0x11b0, 0xd8},
+ {0x11b1, 0x14}, {0x11b2, 0xec}, {0x11b3, 0x32},
+ {0x11b4, 0xdd}, {0x11b5, 0x32}, {0x11b6, 0xdd},
+ {0x10e0, 0x2c}, {0x11bc, 0x40}, {0x11bd, 0x01},
+ {0x11be, 0xf0}, {0x11bf, 0x00}, {0x118c, 0x1f},
+ {0x118d, 0x1f}, {0x118e, 0x1f}, {0x118f, 0x1f},
+ {0x1180, 0x01}, {0x1181, 0x00}, {0x1182, 0x01},
+ {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80}
+};
+
+/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */
+static u8 ov_gain[] = {
+ 0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */,
+ 0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */,
+ 0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */,
+ 0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */,
+ 0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */,
+ 0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */,
+ 0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */,
+ 0x70 /* 8x */
+};
+
+/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */
+static u16 micron1_gain[] = {
+ /* 1x 1.25x 1.5x 1.75x */
+ 0x0020, 0x0028, 0x0030, 0x0038,
+ /* 2x 2.25x 2.5x 2.75x */
+ 0x00a0, 0x00a4, 0x00a8, 0x00ac,
+ /* 3x 3.25x 3.5x 3.75x */
+ 0x00b0, 0x00b4, 0x00b8, 0x00bc,
+ /* 4x 4.25x 4.5x 4.75x */
+ 0x00c0, 0x00c4, 0x00c8, 0x00cc,
+ /* 5x 5.25x 5.5x 5.75x */
+ 0x00d0, 0x00d4, 0x00d8, 0x00dc,
+ /* 6x 6.25x 6.5x 6.75x */
+ 0x00e0, 0x00e4, 0x00e8, 0x00ec,
+ /* 7x 7.25x 7.5x 7.75x */
+ 0x00f0, 0x00f4, 0x00f8, 0x00fc,
+ /* 8x */
+ 0x01c0
+};
+
+/* mt9m001 sensor uses a different gain formula then other micron sensors */
+/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */
+static u16 micron2_gain[] = {
+ /* 1x 1.25x 1.5x 1.75x */
+ 0x0008, 0x000a, 0x000c, 0x000e,
+ /* 2x 2.25x 2.5x 2.75x */
+ 0x0010, 0x0012, 0x0014, 0x0016,
+ /* 3x 3.25x 3.5x 3.75x */
+ 0x0018, 0x001a, 0x001c, 0x001e,
+ /* 4x 4.25x 4.5x 4.75x */
+ 0x0020, 0x0051, 0x0052, 0x0053,
+ /* 5x 5.25x 5.5x 5.75x */
+ 0x0054, 0x0055, 0x0056, 0x0057,
+ /* 6x 6.25x 6.5x 6.75x */
+ 0x0058, 0x0059, 0x005a, 0x005b,
+ /* 7x 7.25x 7.5x 7.75x */
+ 0x005c, 0x005d, 0x005e, 0x005f,
+ /* 8x */
+ 0x0060
+};
+
+/* Gain = .5 + bit[7:0] / 16 */
+static u8 hv7131r_gain[] = {
+ 0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */,
+ 0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */,
+ 0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */,
+ 0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */,
+ 0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */,
+ 0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */,
+ 0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */,
+ 0x78 /* 8x */
+};
+
+static u8 soi968_init[][2] = {
+ {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f},
+ {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00},
+ {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c},
+ {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff},
+ {0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20},
+ {0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e},
+ {0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13},
+ {0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79},
+ {0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40},
+ {0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32},
+ {0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80},
+};
+
+static u8 ov7660_init[][2] = {
+ {0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3},
+ {0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40},
+ {0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a},
+ {0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43},
+ {0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6},
+ {0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50},
+};
+
+static u8 ov7670_init[][2] = {
+ {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01},
+ {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00},
+ {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0},
+ {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00},
+ {0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07},
+ {0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75},
+ {0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8},
+ {0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5},
+ {0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27},
+ {0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b},
+ {0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a},
+ {0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00},
+ {0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00},
+ {0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80},
+ {0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82},
+ {0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20},
+ {0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c},
+ {0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66},
+ {0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11},
+ {0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40},
+ {0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02},
+ {0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a},
+ {0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08},
+ {0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04},
+ {0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30},
+ {0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88},
+ {0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30},
+ {0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99},
+ {0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0},
+ {0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e},
+ {0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01},
+ {0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20},
+ {0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0},
+ {0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30},
+ {0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06},
+ {0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a},
+ {0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a},
+ {0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84},
+ {0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d},
+ {0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d},
+ {0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00},
+ {0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00},
+ {0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60},
+ {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d},
+ {0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e},
+ {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56},
+ {0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03},
+ {0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47},
+ {0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74},
+ {0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2},
+ {0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00},
+ {0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a},
+ {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00},
+ {0x93, 0x00},
+};
+
+static u8 ov9650_init[][2] = {
+ {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78},
+ {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03},
+ {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00},
+ {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00},
+ {0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c},
+ {0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2},
+ {0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07},
+ {0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00},
+ {0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04},
+ {0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68},
+ {0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80},
+ {0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00},
+ {0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00},
+ {0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30},
+ {0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf},
+ {0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00},
+ {0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01},
+ {0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19},
+ {0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1},
+ {0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80},
+ {0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00},
+ {0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20},
+ {0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf},
+ {0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88},
+ {0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00},
+ {0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8},
+ {0xaa, 0x92}, {0xab, 0x0a},
+};
+
+static u8 ov9655_init[][2] = {
+ {0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61},
+ {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24},
+ {0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08},
+ {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf},
+ {0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12},
+ {0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c},
+ {0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40},
+ {0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a},
+ {0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc},
+ {0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04},
+ {0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02},
+ {0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c},
+ {0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60},
+ {0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04},
+ {0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80},
+ {0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf},
+ {0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b},
+ {0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01},
+ {0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0},
+ {0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61},
+ {0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a},
+ {0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01},
+ {0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10},
+ {0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04},
+ {0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00},
+ {0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80},
+ {0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d},
+ {0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14},
+ {0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf},
+ {0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00},
+ {0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00},
+ {0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03},
+ {0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03},
+ {0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13},
+};
+
+static u16 mt9v112_init[][2] = {
+ {0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020},
+ {0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b},
+ {0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001},
+ {0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a},
+ {0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58},
+ {0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001},
+ {0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020},
+ {0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020},
+ {0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020},
+ {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+ {0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2},
+ {0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+ {0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020},
+ {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+ {0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae},
+ {0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae},
+};
+
+static u16 mt9v111_init[][2] = {
+ {0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000},
+ {0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1},
+ {0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002},
+ {0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03},
+ {0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c},
+ {0x2d, 0xf0a0}, {0x2e, 0x0c64}, {0x2f, 0x0064},
+ {0x67, 0x4010}, {0x06, 0x301e}, {0x08, 0x0480},
+ {0x01, 0x0004}, {0x02, 0x0016}, {0x03, 0x01e6},
+ {0x04, 0x0286}, {0x05, 0x0004}, {0x06, 0x0000},
+ {0x07, 0x3002}, {0x08, 0x0008}, {0x0c, 0x0000},
+ {0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000},
+ {0x10, 0x0000}, {0x11, 0x0000}, {0x12, 0x00b0},
+ {0x13, 0x007c}, {0x14, 0x0000}, {0x15, 0x0000},
+ {0x16, 0x0000}, {0x17, 0x0000}, {0x18, 0x0000},
+ {0x19, 0x0000}, {0x1a, 0x0000}, {0x1b, 0x0000},
+ {0x1c, 0x0000}, {0x1d, 0x0000}, {0x30, 0x0000},
+ {0x30, 0x0005}, {0x31, 0x0000}, {0x02, 0x0016},
+ {0x03, 0x01e1}, {0x04, 0x0281}, {0x05, 0x0004},
+ {0x06, 0x0000}, {0x07, 0x3002}, {0x06, 0x002d},
+ {0x05, 0x0004}, {0x09, 0x0064}, {0x2b, 0x00a0},
+ {0x2c, 0x00a0}, {0x2d, 0x00a0}, {0x2e, 0x00a0},
+ {0x02, 0x0016}, {0x03, 0x01e1}, {0x04, 0x0281},
+ {0x05, 0x0004}, {0x06, 0x002d}, {0x07, 0x3002},
+ {0x0e, 0x0008}, {0x06, 0x002d}, {0x05, 0x0004},
+};
+
+static u16 mt9v011_init[][2] = {
+ {0x07, 0x0002}, {0x0d, 0x0001}, {0x0d, 0x0000},
+ {0x01, 0x0008}, {0x02, 0x0016}, {0x03, 0x01e1},
+ {0x04, 0x0281}, {0x05, 0x0083}, {0x06, 0x0006},
+ {0x0d, 0x0002}, {0x0a, 0x0000}, {0x0b, 0x0000},
+ {0x0c, 0x0000}, {0x0d, 0x0000}, {0x0e, 0x0000},
+ {0x0f, 0x0000}, {0x10, 0x0000}, {0x11, 0x0000},
+ {0x12, 0x0000}, {0x13, 0x0000}, {0x14, 0x0000},
+ {0x15, 0x0000}, {0x16, 0x0000}, {0x17, 0x0000},
+ {0x18, 0x0000}, {0x19, 0x0000}, {0x1a, 0x0000},
+ {0x1b, 0x0000}, {0x1c, 0x0000}, {0x1d, 0x0000},
+ {0x32, 0x0000}, {0x20, 0x1101}, {0x21, 0x0000},
+ {0x22, 0x0000}, {0x23, 0x0000}, {0x24, 0x0000},
+ {0x25, 0x0000}, {0x26, 0x0000}, {0x27, 0x0024},
+ {0x2f, 0xf7b0}, {0x30, 0x0005}, {0x31, 0x0000},
+ {0x32, 0x0000}, {0x33, 0x0000}, {0x34, 0x0100},
+ {0x3d, 0x068f}, {0x40, 0x01e0}, {0x41, 0x00d1},
+ {0x44, 0x0082}, {0x5a, 0x0000}, {0x5b, 0x0000},
+ {0x5c, 0x0000}, {0x5d, 0x0000}, {0x5e, 0x0000},
+ {0x5f, 0xa31d}, {0x62, 0x0611}, {0x0a, 0x0000},
+ {0x06, 0x0029}, {0x05, 0x0009}, {0x20, 0x1101},
+ {0x20, 0x1101}, {0x09, 0x0064}, {0x07, 0x0003},
+ {0x2b, 0x0033}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+ {0x2e, 0x0033}, {0x07, 0x0002}, {0x06, 0x0000},
+ {0x06, 0x0029}, {0x05, 0x0009},
+};
+
+static u16 mt9m001_init[][2] = {
+ {0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
+ {0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
+ {0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
+ {0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
+ {0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
+ {0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
+ {0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
+ {0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
+ {0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
+ {0x2e, 0x0029}, {0x07, 0x0002},
+};
+
+static u16 mt9m111_init[][2] = {
+ {0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009},
+ {0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300},
+ {0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200},
+ {0x06, 0x308e}, {0xf0, 0x0000},
+};
+
+static u8 hv7131r_init[][2] = {
+ {0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08},
+ {0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0},
+ {0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08},
+ {0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07},
+ {0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62},
+ {0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10},
+ {0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00},
+ {0x23, 0x09}, {0x01, 0x08},
+};
+
+int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int result;
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x00,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ reg,
+ 0x00,
+ gspca_dev->usb_buf,
+ length,
+ 500);
+ if (unlikely(result < 0 || result != length)) {
+ err("Read register failed 0x%02X", reg);
+ return -EIO;
+ }
+ return 0;
+}
+
+int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int result;
+ memcpy(gspca_dev->usb_buf, buffer, length);
+ result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x08,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ reg,
+ 0x00,
+ gspca_dev->usb_buf,
+ length,
+ 500);
+ if (unlikely(result < 0 || result != length)) {
+ err("Write register failed index 0x%02X", reg);
+ return -EIO;
+ }
+ return 0;
+}
+
+int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value)
+{
+ u8 data[1] = {value};
+ return reg_w(gspca_dev, reg, data, 1);
+}
+
+int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer)
+{
+ int i;
+ reg_w(gspca_dev, 0x10c0, buffer, 8);
+ for (i = 0; i < 5; i++) {
+ reg_r(gspca_dev, 0x10c0, 1);
+ if (gspca_dev->usb_buf[0] & 0x04) {
+ if (gspca_dev->usb_buf[0] & 0x08)
+ return -1;
+ return 0;
+ }
+ msleep(1);
+ }
+ return -1;
+}
+
+int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ u8 row[8];
+
+ /*
+ * from the point of view of the bridge, the length
+ * includes the address
+ */
+ row[0] = 0x81 | (2 << 4);
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = val;
+ row[4] = 0x00;
+ row[5] = 0x00;
+ row[6] = 0x00;
+ row[7] = 0x10;
+
+ return i2c_w(gspca_dev, row);
+}
+
+int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 row[8];
+
+ /*
+ * from the point of view of the bridge, the length
+ * includes the address
+ */
+ row[0] = 0x81 | (3 << 4);
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = (val >> 8) & 0xff;
+ row[4] = val & 0xff;
+ row[5] = 0x00;
+ row[6] = 0x00;
+ row[7] = 0x10;
+
+ return i2c_w(gspca_dev, row);
+}
+
+int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 row[8];
+
+ row[0] = 0x81 | 0x10;
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = 0;
+ row[4] = 0;
+ row[5] = 0;
+ row[6] = 0;
+ row[7] = 0x10;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ row[0] = 0x81 | (2 << 4) | 0x02;
+ row[2] = 0;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ reg_r(gspca_dev, 0x10c2, 5);
+ *val = gspca_dev->usb_buf[3];
+ return 0;
+}
+
+int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 row[8];
+
+ row[0] = 0x81 | 0x10;
+ row[1] = sd->i2c_addr;
+ row[2] = reg;
+ row[3] = 0;
+ row[4] = 0;
+ row[5] = 0;
+ row[6] = 0;
+ row[7] = 0x10;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ row[0] = 0x81 | (3 << 4) | 0x02;
+ row[2] = 0;
+ reg_w(gspca_dev, 0x10c0, row, 8);
+ msleep(1);
+ reg_r(gspca_dev, 0x10c2, 5);
+ *val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3];
+ return 0;
+}
+
+static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
+ if (i2c_w1(gspca_dev, ov9650_init[i][0],
+ ov9650_init[i][1]) < 0) {
+ err("OV9650 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 1;
+ sd->vstart = 7;
+ return 0;
+}
+
+static int ov9655_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) {
+ if (i2c_w1(gspca_dev, ov9655_init[i][0],
+ ov9655_init[i][1]) < 0) {
+ err("OV9655 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 0;
+ sd->vstart = 7;
+ return 0;
+}
+
+static int soi968_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(soi968_init); i++) {
+ if (i2c_w1(gspca_dev, soi968_init[i][0],
+ soi968_init[i][1]) < 0) {
+ err("SOI968 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 60;
+ sd->vstart = 11;
+ return 0;
+}
+
+static int ov7660_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) {
+ if (i2c_w1(gspca_dev, ov7660_init[i][0],
+ ov7660_init[i][1]) < 0) {
+ err("OV7660 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 1;
+ sd->vstart = 1;
+ return 0;
+}
+
+static int ov7670_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) {
+ if (i2c_w1(gspca_dev, ov7670_init[i][0],
+ ov7670_init[i][1]) < 0) {
+ err("OV7670 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 0;
+ sd->vstart = 1;
+ return 0;
+}
+
+static int mt9v_init_sensor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ u16 value;
+ int ret;
+
+ sd->i2c_addr = 0x5d;
+ ret = i2c_r2(gspca_dev, 0xff, &value);
+ if ((ret == 0) && (value == 0x8243)) {
+ for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) {
+ if (i2c_w2(gspca_dev, mt9v011_init[i][0],
+ mt9v011_init[i][1]) < 0) {
+ err("MT9V011 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 2;
+ sd->vstart = 2;
+ sd->sensor = SENSOR_MT9V011;
+ info("MT9V011 sensor detected");
+ return 0;
+ }
+
+ sd->i2c_addr = 0x5c;
+ i2c_w2(gspca_dev, 0x01, 0x0004);
+ ret = i2c_r2(gspca_dev, 0xff, &value);
+ if ((ret == 0) && (value == 0x823a)) {
+ for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) {
+ if (i2c_w2(gspca_dev, mt9v111_init[i][0],
+ mt9v111_init[i][1]) < 0) {
+ err("MT9V111 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 2;
+ sd->vstart = 2;
+ sd->sensor = SENSOR_MT9V111;
+ info("MT9V111 sensor detected");
+ return 0;
+ }
+
+ sd->i2c_addr = 0x5d;
+ ret = i2c_w2(gspca_dev, 0xf0, 0x0000);
+ if (ret < 0) {
+ sd->i2c_addr = 0x48;
+ i2c_w2(gspca_dev, 0xf0, 0x0000);
+ }
+ ret = i2c_r2(gspca_dev, 0x00, &value);
+ if ((ret == 0) && (value == 0x1229)) {
+ for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) {
+ if (i2c_w2(gspca_dev, mt9v112_init[i][0],
+ mt9v112_init[i][1]) < 0) {
+ err("MT9V112 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 6;
+ sd->vstart = 2;
+ sd->sensor = SENSOR_MT9V112;
+ info("MT9V112 sensor detected");
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static int mt9m111_init_sensor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) {
+ if (i2c_w2(gspca_dev, mt9m111_init[i][0],
+ mt9m111_init[i][1]) < 0) {
+ err("MT9M111 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 0;
+ sd->vstart = 2;
+ return 0;
+}
+
+static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
+ if (i2c_w2(gspca_dev, mt9m001_init[i][0],
+ mt9m001_init[i][1]) < 0) {
+ err("MT9M001 sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ /* disable hflip and vflip */
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+ sd->hstart = 2;
+ sd->vstart = 2;
+ return 0;
+}
+
+static int hv7131r_init_sensor(struct gspca_dev *gspca_dev)
+{
+ int i;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) {
+ if (i2c_w1(gspca_dev, hv7131r_init[i][0],
+ hv7131r_init[i][1]) < 0) {
+ err("HV7131R Sensor initialization failed");
+ return -ENODEV;
+ }
+ }
+ sd->hstart = 0;
+ sd->vstart = 1;
+ return 0;
+}
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+static int input_kthread(void *data)
+{
+ struct gspca_dev *gspca_dev = (struct gspca_dev *)data;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ DECLARE_WAIT_QUEUE_HEAD(wait);
+ set_freezable();
+ for (;;) {
+ if (kthread_should_stop())
+ break;
+
+ if (reg_r(gspca_dev, 0x1005, 1) < 0)
+ continue;
+
+ input_report_key(sd->input_dev,
+ KEY_CAMERA,
+ gspca_dev->usb_buf[0] & sd->input_gpio);
+ input_sync(sd->input_dev);
+
+ wait_event_freezable_timeout(wait,
+ kthread_should_stop(),
+ msecs_to_jiffies(100));
+ }
+ return 0;
+}
+
+
+static int sn9c20x_input_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ if (sd->input_gpio == 0)
+ return 0;
+
+ sd->input_dev = input_allocate_device();
+ if (!sd->input_dev)
+ return -ENOMEM;
+
+ sd->input_dev->name = "SN9C20X Webcam";
+
+ sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s",
+ gspca_dev->dev->bus->bus_name,
+ gspca_dev->dev->devpath);
+
+ if (!sd->input_dev->phys)
+ return -ENOMEM;
+
+ usb_to_input_id(gspca_dev->dev, &sd->input_dev->id);
+ sd->input_dev->dev.parent = &gspca_dev->dev->dev;
+
+ set_bit(EV_KEY, sd->input_dev->evbit);
+ set_bit(KEY_CAMERA, sd->input_dev->keybit);
+
+ if (input_register_device(sd->input_dev))
+ return -EINVAL;
+
+ sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d",
+ gspca_dev->vdev.minor);
+
+ if (IS_ERR(sd->input_task))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ if (sd->input_task != NULL && !IS_ERR(sd->input_task))
+ kthread_stop(sd->input_task);
+
+ if (sd->input_dev != NULL) {
+ input_unregister_device(sd->input_dev);
+ kfree(sd->input_dev->phys);
+ input_free_device(sd->input_dev);
+ sd->input_dev = NULL;
+ }
+}
+#endif
+
+static int set_cmatrix(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 hue_coord, hue_index = 180 + sd->hue;
+ u8 cmatrix[21];
+ memset(cmatrix, 0, 21);
+
+ cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26;
+ cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25;
+ cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25;
+ cmatrix[18] = sd->brightness - 0x80;
+
+ hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8;
+ cmatrix[6] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8;
+ cmatrix[8] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8;
+ cmatrix[10] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8;
+ cmatrix[12] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8;
+ cmatrix[14] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8;
+ cmatrix[16] = (unsigned char)(hue_coord & 0xff);
+ cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+ return reg_w(gspca_dev, 0x10e1, cmatrix, 21);
+}
+
+static int set_gamma(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 gamma[17];
+ u8 gval = sd->gamma * 0xb8 / 0x100;
+
+
+ gamma[0] = 0x0a;
+ gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8);
+ gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8);
+ gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8);
+ gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8);
+ gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8);
+ gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8);
+ gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8);
+ gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8);
+ gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8);
+ gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8);
+ gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8);
+ gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8);
+ gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8);
+ gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8);
+ gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8);
+ gamma[16] = 0xf5;
+
+ return reg_w(gspca_dev, 0x1190, gamma, 17);
+}
+
+static int set_redblue(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ reg_w1(gspca_dev, 0x118c, sd->red);
+ reg_w1(gspca_dev, 0x118f, sd->blue);
+ return 0;
+}
+
+static int set_hvflip(struct gspca_dev *gspca_dev)
+{
+ u8 value, tslb;
+ u16 value2;
+ struct sd *sd = (struct sd *) gspca_dev;
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ i2c_r1(gspca_dev, 0x1e, &value);
+ value &= ~0x30;
+ tslb = 0x01;
+ if (sd->hflip)
+ value |= 0x20;
+ if (sd->vflip) {
+ value |= 0x10;
+ tslb = 0x49;
+ }
+ i2c_w1(gspca_dev, 0x1e, value);
+ i2c_w1(gspca_dev, 0x3a, tslb);
+ break;
+ case SENSOR_MT9V111:
+ case SENSOR_MT9V011:
+ i2c_r2(gspca_dev, 0x20, &value2);
+ value2 &= ~0xc0a0;
+ if (sd->hflip)
+ value2 |= 0x8080;
+ if (sd->vflip)
+ value2 |= 0x4020;
+ i2c_w2(gspca_dev, 0x20, value2);
+ break;
+ case SENSOR_MT9M111:
+ case SENSOR_MT9V112:
+ i2c_r2(gspca_dev, 0x20, &value2);
+ value2 &= ~0x0003;
+ if (sd->hflip)
+ value2 |= 0x0002;
+ if (sd->vflip)
+ value2 |= 0x0001;
+ i2c_w2(gspca_dev, 0x20, value2);
+ break;
+ case SENSOR_HV7131R:
+ i2c_r1(gspca_dev, 0x01, &value);
+ value &= ~0x03;
+ if (sd->vflip)
+ value |= 0x01;
+ if (sd->hflip)
+ value |= 0x02;
+ i2c_w1(gspca_dev, 0x01, value);
+ break;
+ }
+ return 0;
+}
+
+static int set_exposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e};
+ switch (sd->sensor) {
+ case SENSOR_OV7660:
+ case SENSOR_OV7670:
+ case SENSOR_SOI968:
+ case SENSOR_OV9655:
+ case SENSOR_OV9650:
+ exp[0] |= (3 << 4);
+ exp[2] = 0x2d;
+ exp[3] = sd->exposure & 0xff;
+ exp[4] = sd->exposure >> 8;
+ break;
+ case SENSOR_MT9M001:
+ case SENSOR_MT9M111:
+ case SENSOR_MT9V112:
+ case SENSOR_MT9V111:
+ case SENSOR_MT9V011:
+ exp[0] |= (3 << 4);
+ exp[2] = 0x09;
+ exp[3] = sd->exposure >> 8;
+ exp[4] = sd->exposure & 0xff;
+ break;
+ case SENSOR_HV7131R:
+ exp[0] |= (4 << 4);
+ exp[2] = 0x25;
+ exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16;
+ exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8;
+ exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff;
+ break;
+ }
+ i2c_w(gspca_dev, exp);
+ return 0;
+}
+
+static int set_gain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d};
+ switch (sd->sensor) {
+ case SENSOR_OV7660:
+ case SENSOR_OV7670:
+ case SENSOR_SOI968:
+ case SENSOR_OV9655:
+ case SENSOR_OV9650:
+ gain[0] |= (2 << 4);
+ gain[3] = ov_gain[sd->gain];
+ break;
+ case SENSOR_MT9V011:
+ case SENSOR_MT9V111:
+ gain[0] |= (3 << 4);
+ gain[2] = 0x35;
+ gain[3] = micron1_gain[sd->gain] >> 8;
+ gain[4] = micron1_gain[sd->gain] & 0xff;
+ break;
+ case SENSOR_MT9V112:
+ case SENSOR_MT9M111:
+ gain[0] |= (3 << 4);
+ gain[2] = 0x2f;
+ gain[3] = micron1_gain[sd->gain] >> 8;
+ gain[4] = micron1_gain[sd->gain] & 0xff;
+ break;
+ case SENSOR_MT9M001:
+ gain[0] |= (3 << 4);
+ gain[2] = 0x2f;
+ gain[3] = micron2_gain[sd->gain] >> 8;
+ gain[4] = micron2_gain[sd->gain] & 0xff;
+ break;
+ case SENSOR_HV7131R:
+ gain[0] |= (2 << 4);
+ gain[2] = 0x30;
+ gain[3] = hv7131r_gain[sd->gain];
+ break;
+ }
+ i2c_w(gspca_dev, gain);
+ return 0;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->brightness = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->brightness;
+ return 0;
+}
+
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->contrast;
+ return 0;
+}
+
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->saturation = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->saturation;
+ return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hue = val;
+ if (gspca_dev->streaming)
+ return set_cmatrix(gspca_dev);
+ return 0;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->hue;
+ return 0;
+}
+
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gamma = val;
+ if (gspca_dev->streaming)
+ return set_gamma(gspca_dev);
+ return 0;
+}
+
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->gamma;
+ return 0;
+}
+
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->red = val;
+ if (gspca_dev->streaming)
+ return set_redblue(gspca_dev);
+ return 0;
+}
+
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->red;
+ return 0;
+}
+
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->blue = val;
+ if (gspca_dev->streaming)
+ return set_redblue(gspca_dev);
+ return 0;
+}
+
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->blue;
+ return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hflip = val;
+ if (gspca_dev->streaming)
+ return set_hvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->hflip;
+ return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->vflip = val;
+ if (gspca_dev->streaming)
+ return set_hvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->vflip;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ return set_exposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ return set_gain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ sd->auto_exposure = val;
+ return 0;
+}
+
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ *val = sd->auto_exposure;
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_register *reg)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ switch (reg->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ if (reg->match.addr != 0)
+ return -EINVAL;
+ if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+ return -EINVAL;
+ if (reg_r(gspca_dev, reg->reg, 1) < 0)
+ return -EINVAL;
+ reg->val = gspca_dev->usb_buf[0];
+ return 0;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ if (reg->match.addr != sd->i2c_addr)
+ return -EINVAL;
+ if (sd->sensor >= SENSOR_MT9V011 &&
+ sd->sensor <= SENSOR_MT9M111) {
+ if (i2c_r2(gspca_dev, reg->reg, (u16 *)®->val) < 0)
+ return -EINVAL;
+ } else {
+ if (i2c_r1(gspca_dev, reg->reg, (u8 *)®->val) < 0)
+ return -EINVAL;
+ }
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_register *reg)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ switch (reg->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ if (reg->match.addr != 0)
+ return -EINVAL;
+ if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+ return -EINVAL;
+ if (reg_w1(gspca_dev, reg->reg, reg->val) < 0)
+ return -EINVAL;
+ return 0;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ if (reg->match.addr != sd->i2c_addr)
+ return -EINVAL;
+ if (sd->sensor >= SENSOR_MT9V011 &&
+ sd->sensor <= SENSOR_MT9M111) {
+ if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0)
+ return -EINVAL;
+ } else {
+ if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0)
+ return -EINVAL;
+ }
+ return 0;
+ }
+ return -EINVAL;
+}
+#endif
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ switch (chip->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ if (chip->match.addr != 0)
+ return -EINVAL;
+ chip->revision = 0;
+ chip->ident = V4L2_IDENT_SN9C20X;
+ return 0;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ if (chip->match.addr != sd->i2c_addr)
+ return -EINVAL;
+ chip->revision = 0;
+ chip->ident = i2c_ident[sd->sensor];
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam;
+
+ cam = &gspca_dev->cam;
+
+ sd->sensor = (id->driver_info >> 8) & 0xff;
+ sd->i2c_addr = id->driver_info & 0xff;
+
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ cam->cam_mode = sxga_mode;
+ cam->nmodes = ARRAY_SIZE(sxga_mode);
+ break;
+ default:
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ }
+
+ sd->old_step = 0;
+ sd->older_step = 0;
+ sd->exposure_step = 16;
+
+ sd->brightness = BRIGHTNESS_DEFAULT;
+ sd->contrast = CONTRAST_DEFAULT;
+ sd->saturation = SATURATION_DEFAULT;
+ sd->hue = HUE_DEFAULT;
+ sd->gamma = GAMMA_DEFAULT;
+ sd->red = RED_DEFAULT;
+ sd->blue = BLUE_DEFAULT;
+
+ sd->hflip = HFLIP_DEFAULT;
+ sd->vflip = VFLIP_DEFAULT;
+ sd->exposure = EXPOSURE_DEFAULT;
+ sd->gain = GAIN_DEFAULT;
+ sd->auto_exposure = AUTO_EXPOSURE_DEFAULT;
+
+ sd->quality = 95;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+ sd->input_gpio = (id->driver_info >> 16) & 0xff;
+ if (sn9c20x_input_init(gspca_dev) < 0)
+ return -ENODEV;
+#endif
+ return 0;
+}
+
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+ u8 value;
+ u8 i2c_init[9] =
+ {0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03};
+
+ for (i = 0; i < ARRAY_SIZE(bridge_init); i++) {
+ value = bridge_init[i][1];
+ if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) {
+ err("Device initialization failed");
+ return -ENODEV;
+ }
+ }
+
+ if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) {
+ err("Device initialization failed");
+ return -ENODEV;
+ }
+
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ if (ov9650_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV9650 sensor detected");
+ break;
+ case SENSOR_OV9655:
+ if (ov9655_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV9655 sensor detected");
+ break;
+ case SENSOR_SOI968:
+ if (soi968_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("SOI968 sensor detected");
+ break;
+ case SENSOR_OV7660:
+ if (ov7660_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV7660 sensor detected");
+ break;
+ case SENSOR_OV7670:
+ if (ov7670_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("OV7670 sensor detected");
+ break;
+ case SENSOR_MT9VPRB:
+ if (mt9v_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ break;
+ case SENSOR_MT9M111:
+ if (mt9m111_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("MT9M111 sensor detected");
+ break;
+ case SENSOR_MT9M001:
+ if (mt9m001_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("MT9M001 sensor detected");
+ break;
+ case SENSOR_HV7131R:
+ if (hv7131r_init_sensor(gspca_dev) < 0)
+ return -ENODEV;
+ info("HV7131R sensor detected");
+ break;
+ default:
+ info("Unsupported Sensor");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 value;
+ switch (sd->sensor) {
+ case SENSOR_OV9650:
+ if (mode & MODE_SXGA) {
+ i2c_w1(gspca_dev, 0x17, 0x1b);
+ i2c_w1(gspca_dev, 0x18, 0xbc);
+ i2c_w1(gspca_dev, 0x19, 0x01);
+ i2c_w1(gspca_dev, 0x1a, 0x82);
+ i2c_r1(gspca_dev, 0x12, &value);
+ i2c_w1(gspca_dev, 0x12, value & 0x07);
+ } else {
+ i2c_w1(gspca_dev, 0x17, 0x24);
+ i2c_w1(gspca_dev, 0x18, 0xc5);
+ i2c_w1(gspca_dev, 0x19, 0x00);
+ i2c_w1(gspca_dev, 0x1a, 0x3c);
+ i2c_r1(gspca_dev, 0x12, &value);
+ i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40);
+ }
+ break;
+ }
+}
+
+#define HW_WIN(mode, hstart, vstart) \
+((const u8 []){hstart & 0xff, hstart >> 8, \
+vstart & 0xff, vstart >> 8, \
+(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \
+(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)})
+
+#define CLR_WIN(width, height) \
+((const u8 [])\
+{0, width >> 2, 0, height >> 1,\
+((width >> 10) & 0x01) | ((height >> 8) & 0x6)})
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ int width = gspca_dev->width;
+ int height = gspca_dev->height;
+ u8 fmt, scale = 0;
+
+ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (sd->jpeg_hdr == NULL)
+ return -ENOMEM;
+
+ jpeg_define(sd->jpeg_hdr, height, width,
+ 0x21);
+ jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+
+ if (mode & MODE_RAW)
+ fmt = 0x2d;
+ else if (mode & MODE_JPEG)
+ fmt = 0x2c;
+ else
+ fmt = 0x2f;
+
+ switch (mode & 0x0f) {
+ case 3:
+ scale = 0xc0;
+ info("Set 1280x1024");
+ break;
+ case 2:
+ scale = 0x80;
+ info("Set 640x480");
+ break;
+ case 1:
+ scale = 0x90;
+ info("Set 320x240");
+ break;
+ case 0:
+ scale = 0xa0;
+ info("Set 160x120");
+ break;
+ }
+
+ configure_sensor_output(gspca_dev, mode);
+ reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64);
+ reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64);
+ reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5);
+ reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6);
+ reg_w1(gspca_dev, 0x1189, scale);
+ reg_w1(gspca_dev, 0x10e0, fmt);
+
+ set_cmatrix(gspca_dev);
+ set_gamma(gspca_dev);
+ set_redblue(gspca_dev);
+ set_gain(gspca_dev);
+ set_exposure(gspca_dev);
+ set_hvflip(gspca_dev);
+
+ reg_r(gspca_dev, 0x1061, 1);
+ reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02);
+ return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ reg_r(gspca_dev, 0x1061, 1);
+ reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02);
+}
+
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ kfree(sd->jpeg_hdr);
+}
+
+static void do_autoexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int avg_lum, new_exp;
+
+ if (!sd->auto_exposure)
+ return;
+
+ avg_lum = atomic_read(&sd->avg_lum);
+
+ /*
+ * some hardcoded values are present
+ * like those for maximal/minimal exposure
+ * and exposure steps
+ */
+ if (avg_lum < MIN_AVG_LUM) {
+ if (sd->exposure > 0x1770)
+ return;
+
+ new_exp = sd->exposure + sd->exposure_step;
+ if (new_exp > 0x1770)
+ new_exp = 0x1770;
+ if (new_exp < 0x10)
+ new_exp = 0x10;
+ sd->exposure = new_exp;
+ set_exposure(gspca_dev);
+
+ sd->older_step = sd->old_step;
+ sd->old_step = 1;
+
+ if (sd->old_step ^ sd->older_step)
+ sd->exposure_step /= 2;
+ else
+ sd->exposure_step += 2;
+ }
+ if (avg_lum > MAX_AVG_LUM) {
+ if (sd->exposure < 0x10)
+ return;
+ new_exp = sd->exposure - sd->exposure_step;
+ if (new_exp > 0x1700)
+ new_exp = 0x1770;
+ if (new_exp < 0x10)
+ new_exp = 0x10;
+ sd->exposure = new_exp;
+ set_exposure(gspca_dev);
+ sd->older_step = sd->old_step;
+ sd->old_step = 0;
+
+ if (sd->old_step ^ sd->older_step)
+ sd->exposure_step /= 2;
+ else
+ sd->exposure_step += 2;
+ }
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ struct gspca_frame *frame, /* target */
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int avg_lum;
+ static unsigned char frame_header[] =
+ {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
+ if (len == 64 && memcmp(data, frame_header, 6) == 0) {
+ avg_lum = ((data[35] >> 2) & 3) |
+ (data[20] << 2) |
+ (data[19] << 10);
+ avg_lum += ((data[35] >> 4) & 3) |
+ (data[22] << 2) |
+ (data[21] << 10);
+ avg_lum += ((data[35] >> 6) & 3) |
+ (data[24] << 2) |
+ (data[23] << 10);
+ avg_lum += (data[36] & 3) |
+ (data[26] << 2) |
+ (data[25] << 10);
+ avg_lum += ((data[36] >> 2) & 3) |
+ (data[28] << 2) |
+ (data[27] << 10);
+ avg_lum += ((data[36] >> 4) & 3) |
+ (data[30] << 2) |
+ (data[29] << 10);
+ avg_lum += ((data[36] >> 6) & 3) |
+ (data[32] << 2) |
+ (data[31] << 10);
+ avg_lum += ((data[44] >> 4) & 3) |
+ (data[34] << 2) |
+ (data[33] << 10);
+ avg_lum >>= 9;
+ atomic_set(&sd->avg_lum, avg_lum);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ frame, data, len);
+ return;
+ }
+ if (gspca_dev->last_packet_type == LAST_PACKET) {
+ if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv
+ & MODE_JPEG) {
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ sd->jpeg_hdr, JPEG_HDR_SZ);
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ data, len);
+ } else {
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ data, len);
+ }
+ } else {
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ }
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .stop0 = sd_stop0,
+ .pkt_scan = sd_pkt_scan,
+ .dq_callback = do_autoexposure,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .set_register = sd_dbg_s_register,
+ .get_register = sd_dbg_g_register,
+#endif
+ .get_chip_ident = sd_chip_ident,
+};
+
+#define SN9C20X(sensor, i2c_addr, button_mask) \
+ .driver_info = (button_mask << 16) \
+ | (SENSOR_ ## sensor << 8) \
+ | (i2c_addr)
+
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)},
+ {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)},
+ {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)},
+ {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)},
+ {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)},
+ {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)},
+ {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)},
+ {USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)},
+ {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)},
+ {USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static void sd_disconnect(struct usb_interface *intf)
+{
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ sn9c20x_input_cleanup(gspca_dev);
+#endif
+
+ gspca_disconnect(intf);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = sd_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+ .reset_resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ info("registered");
+ return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0d02f41..d6332ab 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1634,6 +1634,8 @@
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (gspca_dev->ctrl_dis & (1 << FREQ_IDX))
+ return;
if (sd->sensor == SENSOR_OV7660) {
switch (sd->freq) {
case 0: /* Banding filter disabled */
@@ -1735,6 +1737,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 8806b2f..fab7ef8 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -670,6 +670,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index f25be20..4762896 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -333,6 +333,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 9df7137..992ce53 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -36,10 +36,6 @@
#define STV_ISOC_ENDPOINT_ADDR 0x81
-#ifndef V4L2_PIX_FMT_SGRBG8
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G')
-#endif
-
#define STV_REG23 0x0423
/* Control registers of the STV0600 ASIC */
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 3039ec2..e5024c8 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -64,7 +64,7 @@
{
HDCS_1X00_DEF_WIDTH,
HDCS_1X00_DEF_HEIGHT,
- V4L2_PIX_FMT_SBGGR8,
+ V4L2_PIX_FMT_SGRBG8,
V4L2_FIELD_NONE,
.sizeimage =
HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT,
@@ -80,7 +80,7 @@
{
HDCS_1020_DEF_WIDTH,
HDCS_1020_DEF_HEIGHT,
- V4L2_PIX_FMT_SBGGR8,
+ V4L2_PIX_FMT_SGRBG8,
V4L2_FIELD_NONE,
.sizeimage =
HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT,
@@ -131,9 +131,11 @@
(reg + len > 0xff)))
return -EINVAL;
- for (i = 0; i < len; i++, reg++) {
- regs[2*i] = reg;
- regs[2*i+1] = vals[i];
+ for (i = 0; i < len; i++) {
+ regs[2 * i] = reg;
+ regs[2 * i + 1] = vals[i];
+ /* All addresses are shifted left one bit as bit 0 toggles r/w */
+ reg += 2;
}
return stv06xx_write_sensor_bytes(sd, regs, len);
@@ -174,7 +176,9 @@
}
ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val);
- if (ret < 0)
+
+ /* Update the state if the write succeeded */
+ if (!ret)
hdcs->state = state;
return ret;
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 9623f29..5127bbf 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -973,6 +973,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x22); /* JPEG 411 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 08422d3..3d2756f 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7243,6 +7243,8 @@
/* create the JPEG header */
sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
new file mode 100644
index 0000000..b2260de6
--- /dev/null
+++ b/drivers/media/video/mt9v011.c
@@ -0,0 +1,496 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+#include <media/v4l2-device.h>
+#include "mt9v011.h"
+#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
+
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* supported controls */
+static struct v4l2_queryctrl mt9v011_qctrl[] = {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = (1 << 10) - 1,
+ .step = 1,
+ .default_value = 0x0020,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red Balance",
+ .minimum = -1 << 9,
+ .maximum = (1 << 9) - 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ }, {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue Balance",
+ .minimum = -1 << 9,
+ .maximum = (1 << 9) - 1,
+ .step = 1,
+ .default_value = 0,
+ .flags = 0,
+ },
+};
+
+struct mt9v011 {
+ struct v4l2_subdev sd;
+ unsigned width, height;
+ unsigned xtal;
+
+ u16 global_gain, red_bal, blue_bal;
+};
+
+static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct mt9v011, sd);
+}
+
+static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ __be16 buffer;
+ int rc, val;
+
+ rc = i2c_master_send(c, &addr, 1);
+ if (rc != 1)
+ v4l2_dbg(0, debug, sd,
+ "i2c i/o error: rc == %d (should be 1)\n", rc);
+
+ msleep(10);
+
+ rc = i2c_master_recv(c, (char *)&buffer, 2);
+ if (rc != 2)
+ v4l2_dbg(0, debug, sd,
+ "i2c i/o error: rc == %d (should be 2)\n", rc);
+
+ val = be16_to_cpu(buffer);
+
+ v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
+
+ return val;
+}
+
+static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
+ u16 value)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ unsigned char buffer[3];
+ int rc;
+
+ buffer[0] = addr;
+ buffer[1] = value >> 8;
+ buffer[2] = value & 0xff;
+
+ v4l2_dbg(2, debug, sd,
+ "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
+ rc = i2c_master_send(c, buffer, 3);
+ if (rc != 3)
+ v4l2_dbg(0, debug, sd,
+ "i2c i/o error: rc == %d (should be 3)\n", rc);
+}
+
+
+struct i2c_reg_value {
+ unsigned char reg;
+ u16 value;
+};
+
+/*
+ * Values used at the original driver
+ * Some values are marked as Reserved at the datasheet
+ */
+static const struct i2c_reg_value mt9v011_init_default[] = {
+ { R0D_MT9V011_RESET, 0x0001 },
+ { R0D_MT9V011_RESET, 0x0000 },
+
+ { R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
+ { R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
+
+ { R0A_MT9V011_CLK_SPEED, 0x0000 },
+ { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
+ { R20_MT9V011_READ_MODE, 0x1000 },
+
+ { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */
+};
+
+static void set_balance(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ u16 green1_gain, green2_gain, blue_gain, red_gain;
+
+ green1_gain = core->global_gain;
+ green2_gain = core->global_gain;
+
+ blue_gain = core->global_gain +
+ core->global_gain * core->blue_bal / (1 << 9);
+
+ red_gain = core->global_gain +
+ core->global_gain * core->blue_bal / (1 << 9);
+
+ mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
+ mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain);
+ mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
+ mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+}
+
+static void calc_fps(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned height, width, hblank, vblank, speed;
+ unsigned row_time, t_time;
+ u64 frames_per_ms;
+ unsigned tmp;
+
+ height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+ width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+ hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+ vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+ speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
+
+ row_time = (width + 113 + hblank) * (speed + 2);
+ t_time = row_time * (height + vblank + 1);
+
+ frames_per_ms = core->xtal * 1000l;
+ do_div(frames_per_ms, t_time);
+ tmp = frames_per_ms;
+
+ v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
+ tmp / 1000, tmp % 1000, t_time);
+}
+
+static void set_res(struct v4l2_subdev *sd)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned vstart, hstart;
+
+ /*
+ * The mt9v011 doesn't have scaling. So, in order to select the desired
+ * resolution, we're cropping at the middle of the sensor.
+ * hblank and vblank should be adjusted, in order to warrant that
+ * we'll preserve the line timings for 30 fps, no matter what resolution
+ * is selected.
+ * NOTE: datasheet says that width (and height) should be filled with
+ * width-1. However, this doesn't work, since one pixel per line will
+ * be missing.
+ */
+
+ hstart = 14 + (640 - core->width) / 2;
+ mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
+ mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
+ mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
+
+ vstart = 8 + (480 - core->height) / 2;
+ mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
+ mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
+ mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+
+ calc_fps(sd);
+};
+
+static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
+ mt9v011_write(sd, mt9v011_init_default[i].reg,
+ mt9v011_init_default[i].value);
+
+ set_balance(sd);
+ set_res(sd);
+
+ return 0;
+};
+
+static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+
+ v4l2_dbg(1, debug, sd, "g_ctrl called\n");
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ ctrl->value = core->global_gain;
+ return 0;
+ case V4L2_CID_RED_BALANCE:
+ ctrl->value = core->red_bal;
+ return 0;
+ case V4L2_CID_BLUE_BALANCE:
+ ctrl->value = core->blue_bal;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ v4l2_dbg(1, debug, sd, "queryctrl called\n");
+
+ for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
+ if (qc->id && qc->id == mt9v011_qctrl[i].id) {
+ memcpy(qc, &(mt9v011_qctrl[i]),
+ sizeof(*qc));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
+static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ u8 i, n;
+ n = ARRAY_SIZE(mt9v011_qctrl);
+
+ for (i = 0; i < n; i++) {
+ if (ctrl->id != mt9v011_qctrl[i].id)
+ continue;
+ if (ctrl->value < mt9v011_qctrl[i].minimum ||
+ ctrl->value > mt9v011_qctrl[i].maximum)
+ return -ERANGE;
+ v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
+ ctrl->id, ctrl->value);
+ break;
+ }
+
+ switch (ctrl->id) {
+ case V4L2_CID_GAIN:
+ core->global_gain = ctrl->value;
+ break;
+ case V4L2_CID_RED_BALANCE:
+ core->red_bal = ctrl->value;
+ break;
+ case V4L2_CID_BLUE_BALANCE:
+ core->blue_bal = ctrl->value;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ set_balance(sd);
+
+ return 0;
+}
+
+static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt)
+{
+ if (fmt->index > 0)
+ return -EINVAL;
+
+ fmt->flags = 0;
+ strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG");
+ fmt->pixelformat = V4L2_PIX_FMT_SGRBG8;
+
+ return 0;
+}
+
+static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8)
+ return -EINVAL;
+
+ v4l_bound_align_image(&pix->width, 48, 639, 1,
+ &pix->height, 32, 480, 1, 0);
+
+ return 0;
+}
+
+static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+ struct mt9v011 *core = to_mt9v011(sd);
+ int rc;
+
+ rc = mt9v011_try_fmt(sd, fmt);
+ if (rc < 0)
+ return -EINVAL;
+
+ core->width = pix->width;
+ core->height = pix->height;
+
+ set_res(sd);
+
+ return 0;
+}
+
+static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
+{
+ struct mt9v011 *core = to_mt9v011(sd);
+ unsigned *xtal = data;
+
+ v4l2_dbg(1, debug, sd, "s_config called\n");
+
+ if (xtal) {
+ core->xtal = *xtal;
+ v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
+ *xtal / 1000000, (*xtal / 1000) % 1000);
+ }
+
+ return 0;
+}
+
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mt9v011_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ reg->val = mt9v011_read(sd, reg->reg & 0xff);
+ reg->size = 2;
+
+ return 0;
+}
+
+static int mt9v011_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
+
+ return 0;
+}
+#endif
+
+static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
+ MT9V011_VERSION);
+}
+
+static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+ .queryctrl = mt9v011_queryctrl,
+ .g_ctrl = mt9v011_g_ctrl,
+ .s_ctrl = mt9v011_s_ctrl,
+ .reset = mt9v011_reset,
+ .s_config = mt9v011_s_config,
+ .g_chip_ident = mt9v011_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = mt9v011_g_register,
+ .s_register = mt9v011_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
+ .enum_fmt = mt9v011_enum_fmt,
+ .try_fmt = mt9v011_try_fmt,
+ .s_fmt = mt9v011_s_fmt,
+};
+
+static const struct v4l2_subdev_ops mt9v011_ops = {
+ .core = &mt9v011_core_ops,
+ .video = &mt9v011_video_ops,
+};
+
+
+/****************************************************************************
+ I2C Client & Driver
+ ****************************************************************************/
+
+static int mt9v011_probe(struct i2c_client *c,
+ const struct i2c_device_id *id)
+{
+ u16 version;
+ struct mt9v011 *core;
+ struct v4l2_subdev *sd;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(c->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ sd = &core->sd;
+ v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
+
+ /* Check if the sensor is really a MT9V011 */
+ version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
+ if (version != MT9V011_VERSION) {
+ v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n",
+ version);
+ kfree(core);
+ return -EINVAL;
+ }
+
+ core->global_gain = 0x0024;
+ core->width = 640;
+ core->height = 480;
+ core->xtal = 27000000; /* Hz */
+
+ v4l_info(c, "chip found @ 0x%02x (%s)\n",
+ c->addr << 1, c->adapter->name);
+
+ return 0;
+}
+
+static int mt9v011_remove(struct i2c_client *c)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(c);
+
+ v4l2_dbg(1, debug, sd,
+ "mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
+ c->addr << 1);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_mt9v011(sd));
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id mt9v011_id[] = {
+ { "mt9v011", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mt9v011_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "mt9v011",
+ .probe = mt9v011_probe,
+ .remove = mt9v011_remove,
+ .id_table = mt9v011_id,
+};
diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h
new file mode 100644
index 0000000..9e443ee
--- /dev/null
+++ b/drivers/media/video/mt9v011.h
@@ -0,0 +1,35 @@
+/*
+ * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
+ *
+ * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * This code is placed under the terms of the GNU General Public License v2
+ */
+
+#ifndef MT9V011_H_
+#define MT9V011_H_
+
+#define R00_MT9V011_CHIP_VERSION 0x00
+#define R01_MT9V011_ROWSTART 0x01
+#define R02_MT9V011_COLSTART 0x02
+#define R03_MT9V011_HEIGHT 0x03
+#define R04_MT9V011_WIDTH 0x04
+#define R05_MT9V011_HBLANK 0x05
+#define R06_MT9V011_VBLANK 0x06
+#define R07_MT9V011_OUT_CTRL 0x07
+#define R09_MT9V011_SHUTTER_WIDTH 0x09
+#define R0A_MT9V011_CLK_SPEED 0x0a
+#define R0B_MT9V011_RESTART 0x0b
+#define R0C_MT9V011_SHUTTER_DELAY 0x0c
+#define R0D_MT9V011_RESET 0x0d
+#define R1E_MT9V011_DIGITAL_ZOOM 0x1e
+#define R20_MT9V011_READ_MODE 0x20
+#define R2B_MT9V011_GREEN_1_GAIN 0x2b
+#define R2C_MT9V011_BLUE_GAIN 0x2c
+#define R2D_MT9V011_RED_GAIN 0x2d
+#define R2E_MT9V011_GREEN_2_GAIN 0x2e
+#define R35_MT9V011_GLOBAL_GAIN 0x35
+#define RF1_MT9V011_CHIP_ENABLE 0xf1
+
+#define MT9V011_VERSION 0x8243
+
+#endif
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index db25c30..8d17cf6 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,6 +62,7 @@
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#ifdef CONFIG_USB_PWC_INPUT_EVDEV
#include <linux/usb/input.h>
#endif
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 0be6f81..0b658de 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
#include <linux/usb.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
-#include <linux/smp_lock.h>
#include <linux/version.h>
#include <linux/mutex.h>
#include <linux/mm.h>
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 6be845c..9e3262c 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -48,6 +48,7 @@
#include <linux/videodev2.h>
#include <linux/version.h>
#include <linux/mm.h>
+#include <linux/smp_lock.h>
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 155804b..b624a4c 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -43,7 +43,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/videotext.h>
#include <linux/videodev2.h>
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 271d6e9..12835fb8 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -46,7 +46,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/videotext.h>
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index add1757..296788c 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/delay.h>
#include "saa7134-reg.h"
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index c8f0529..85ffc2c 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/usb.h>
#include "se401.h"
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 16f595d..9f5ae81 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -237,11 +237,11 @@
return -ENOMEM;
icd->num_user_formats = fmts;
- fmts = 0;
dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
/* Second pass - actually fill data formats */
+ fmts = 0;
for (i = 0; i < icd->num_formats; i++)
if (!ici->ops->get_formats) {
icd->user_formats[i].host_fmt = icd->formats + i;
@@ -877,8 +877,11 @@
(unsigned short)~0;
ret = soc_camera_init_user_formats(icd);
- if (ret < 0)
+ if (ret < 0) {
+ if (icd->ops->remove)
+ icd->ops->remove(icd);
goto eiufmt;
+ }
icd->height = DEFAULT_HEIGHT;
icd->width = DEFAULT_WIDTH;
@@ -902,8 +905,10 @@
{
struct soc_camera_device *icd = to_soc_camera_dev(dev);
+ mutex_lock(&icd->video_lock);
if (icd->ops->remove)
icd->ops->remove(icd);
+ mutex_unlock(&icd->video_lock);
soc_camera_free_user_formats(icd);
@@ -1145,6 +1150,7 @@
}
EXPORT_SYMBOL(soc_camera_video_start);
+/* Called from client .remove() methods with .video_lock held */
void soc_camera_video_stop(struct soc_camera_device *icd)
{
struct video_device *vdev = icd->vdev;
@@ -1154,10 +1160,8 @@
if (!icd->dev.parent || !vdev)
return;
- mutex_lock(&icd->video_lock);
video_unregister_device(vdev);
icd->vdev = NULL;
- mutex_unlock(&icd->video_lock);
}
EXPORT_SYMBOL(soc_camera_video_stop);
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 2e59370..4d6785e 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/mm.h>
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 0eb3130..eaada39 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/poll.h>
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 75f286f..8b4e7daf 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -62,6 +62,7 @@
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/errno.h>
#include <linux/videodev.h>
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 8d73979..45fce39 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -43,6 +43,7 @@
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 90b5891..90d9b5c 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,6 +50,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/highmem.h>
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 31eac66..a7f1b69 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index cd72668..7705fc6 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -343,6 +343,53 @@
#define TO_U(r, g, b) \
(((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128)
+/* precalculate color bar values to speed up rendering */
+static void precalculate_bars(struct vivi_fh *fh)
+{
+ struct vivi_dev *dev = fh->dev;
+ unsigned char r, g, b;
+ int k, is_yuv;
+
+ fh->input = dev->input;
+
+ for (k = 0; k < 8; k++) {
+ r = bars[fh->input].bar[k][0];
+ g = bars[fh->input].bar[k][1];
+ b = bars[fh->input].bar[k][2];
+ is_yuv = 0;
+
+ switch (fh->fmt->fourcc) {
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
+ is_yuv = 1;
+ break;
+ case V4L2_PIX_FMT_RGB565:
+ case V4L2_PIX_FMT_RGB565X:
+ r >>= 3;
+ g >>= 2;
+ b >>= 3;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ case V4L2_PIX_FMT_RGB555X:
+ r >>= 3;
+ g >>= 3;
+ b >>= 3;
+ break;
+ }
+
+ if (is_yuv) {
+ fh->bars[k][0] = TO_Y(r, g, b); /* Luma */
+ fh->bars[k][1] = TO_U(r, g, b); /* Cb */
+ fh->bars[k][2] = TO_V(r, g, b); /* Cr */
+ } else {
+ fh->bars[k][0] = r;
+ fh->bars[k][1] = g;
+ fh->bars[k][2] = b;
+ }
+ }
+
+}
+
#define TSTAMP_MIN_Y 24
#define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15)
#define TSTAMP_INPUT_X 10
@@ -755,6 +802,8 @@
buf->vb.height = fh->height;
buf->vb.field = field;
+ precalculate_bars(fh);
+
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
rc = videobuf_iolock(vq, &buf->vb, NULL);
if (rc < 0)
@@ -893,53 +942,6 @@
return 0;
}
-/* precalculate color bar values to speed up rendering */
-static void precalculate_bars(struct vivi_fh *fh)
-{
- struct vivi_dev *dev = fh->dev;
- unsigned char r, g, b;
- int k, is_yuv;
-
- fh->input = dev->input;
-
- for (k = 0; k < 8; k++) {
- r = bars[fh->input].bar[k][0];
- g = bars[fh->input].bar[k][1];
- b = bars[fh->input].bar[k][2];
- is_yuv = 0;
-
- switch (fh->fmt->fourcc) {
- case V4L2_PIX_FMT_YUYV:
- case V4L2_PIX_FMT_UYVY:
- is_yuv = 1;
- break;
- case V4L2_PIX_FMT_RGB565:
- case V4L2_PIX_FMT_RGB565X:
- r >>= 3;
- g >>= 2;
- b >>= 3;
- break;
- case V4L2_PIX_FMT_RGB555:
- case V4L2_PIX_FMT_RGB555X:
- r >>= 3;
- g >>= 3;
- b >>= 3;
- break;
- }
-
- if (is_yuv) {
- fh->bars[k][0] = TO_Y(r, g, b); /* Luma */
- fh->bars[k][1] = TO_U(r, g, b); /* Cb */
- fh->bars[k][2] = TO_V(r, g, b); /* Cr */
- } else {
- fh->bars[k][0] = r;
- fh->bars[k][1] = g;
- fh->bars[k][2] = b;
- }
- }
-
-}
-
/*FIXME: This seems to be generic enough to be at videodev2 */
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
struct v4l2_format *f)
@@ -965,8 +967,6 @@
fh->vb_vidq.field = f->fmt.pix.field;
fh->type = f->type;
- precalculate_bars(fh);
-
ret = 0;
out:
mutex_unlock(&q->vb_lock);
@@ -1357,6 +1357,7 @@
goto unreg_dev;
*vfd = vivi_template;
+ vfd->debug = debug;
ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
if (ret < 0)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 3d7df32..bcdefb1 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,6 +49,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 7ac12cb..5b6e58a 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -32,8 +32,7 @@
* This driver was tested with firmware revision A4.
*/
-#if defined(CONFIG_KEYBOARD_DM355EVM) \
- || defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE)
#define msp_has_keyboard() true
#else
#define msp_has_keyboard() false
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index 671a7ef..c1de4af 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -238,8 +238,10 @@
mutex_lock(&pcap->adc_mutex);
req = pcap->adc_queue[pcap->adc_head];
- if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
+ if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) {
+ mutex_unlock(&pcap->adc_mutex);
return IRQ_HANDLED;
+ }
/* read requested channels results */
ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 4c7b796..0cc5eef 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -367,7 +367,8 @@
break;
default:
- return -1;
+ gate = -1;
+ goto already;
}
writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index bae61b2..7d43083 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,14 +180,9 @@
static int twl4030_irq_thread(void *data)
{
long irq = (long)data;
- struct irq_desc *desc = irq_to_desc(irq);
static unsigned i2c_errors;
static const unsigned max_i2c_errors = 100;
- if (!desc) {
- pr_err("twl4030: Invalid IRQ: %ld\n", irq);
- return -EINVAL;
- }
current->flags |= PF_NOFREEZE;
@@ -240,7 +235,7 @@
}
local_irq_enable();
- desc->chip->unmask(irq);
+ enable_irq(irq);
}
return 0;
@@ -255,25 +250,13 @@
* thread. All we do here is acknowledge and mask the interrupt and wakeup
* the kernel thread.
*/
-static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
/* Acknowledge, clear *AND* mask the interrupt... */
- desc->chip->ack(irq);
- complete(&irq_event);
+ disable_irq_nosync(irq);
+ complete(devid);
+ return IRQ_HANDLED;
}
-
-static struct task_struct *start_twl4030_irq_thread(long irq)
-{
- struct task_struct *thread;
-
- init_completion(&irq_event);
- thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
- if (!thread)
- pr_err("twl4030: could not create irq %ld thread!\n", irq);
-
- return thread;
-}
-
/*----------------------------------------------------------------------*/
/*
@@ -734,18 +717,28 @@
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
- task = start_twl4030_irq_thread(irq_num);
- if (!task) {
- pr_err("twl4030: irq thread FAIL\n");
- status = -ESRCH;
- goto fail;
+
+
+ init_completion(&irq_event);
+
+ status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
+ "TWL4030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_rqirq;
}
- set_irq_data(irq_num, task);
- set_irq_chained_handler(irq_num, handle_twl4030_pih);
-
+ task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+ if (IS_ERR(task)) {
+ pr_err("twl4030: could not create irq %d thread!\n", irq_num);
+ status = PTR_ERR(task);
+ goto fail_kthread;
+ }
return status;
-
+fail_kthread:
+ free_irq(irq_num, &irq_event);
+fail_rqirq:
+ /* clean up twl4030_sih_setup */
fail:
for (i = irq_base; i < irq_end; i++)
set_irq_chip_and_handler(i, NULL, NULL);
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d38a7ac..d019746 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -114,7 +114,6 @@
if (!left)
return;
addr += len;
- flush_kernel_dcache_page(miter->page);
} while (sg_dwiter_next(miter));
}
@@ -142,9 +141,6 @@
return;
} else
sg_dwiter_write_slow(miter, data);
-
- if (miter->length == miter->consumed)
- flush_kernel_dcache_page(miter->page);
}
EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b34cb5f..2e535a0 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -173,6 +173,7 @@
unsigned segment;
unsigned offset = (unsigned) off;
u8 *cp = bounce + 1;
+ int sr;
*cp = AT25_WREN;
status = spi_write(at25->spi, cp, 1);
@@ -214,7 +215,6 @@
timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
retries = 0;
do {
- int sr;
sr = spi_w8r8(at25->spi, AT25_RDSR);
if (sr < 0 || (sr & AT25_SR_nRDY)) {
@@ -228,7 +228,7 @@
break;
} while (retries++ < 3 || time_before_eq(jiffies, timeout));
- if (time_after(jiffies, timeout)) {
+ if ((sr < 0) || (sr & AT25_SR_nRDY)) {
dev_err(&at25->spi->dev,
"write %d bytes offset %d, "
"timeout after %u msecs\n",
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index fa2d93a..aed6098 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/io.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index eedbf9c..79689b1 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -24,7 +24,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 8d1c60a..5d778ec 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -235,7 +235,7 @@
skb->ip_summed = CHECKSUM_UNNECESSARY;
dev_dbg(xpnet, "passing skb to network layer\n"
- KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
+ "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "
"skb->end=0x%p skb->len=%d\n",
(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
skb_end_pointer(skb), skb->len);
@@ -399,7 +399,7 @@
msg->buf_pa = xp_pa((void *)start_addr);
dev_dbg(xpnet, "sending XPC message to %d:%d\n"
- KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+ "msg->buf_pa=0x%lx, msg->size=%u, "
"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
msg->leadin_ignore, msg->tailout_ignore);
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 11efefb..4e72964 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -278,7 +278,7 @@
if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
return -EINVAL;
- sg_miter_start(&miter, data->sg, data->sg_len, 0);
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
@@ -307,7 +307,7 @@
goto out;
}
out:
- cb710_sg_miter_stop_writing(&miter);
+ sg_miter_stop(&miter);
return err;
}
@@ -322,7 +322,7 @@
if (unlikely(data->blocks > 1 && data->blksz & 15))
return -EINVAL;
- sg_miter_start(&miter, data->sg, data->sg_len, 0);
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index e0be21a..bf98d7c 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -652,7 +652,7 @@
set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
tasklet_schedule(&host->tasklet);
- return IRQ_RETVAL(handled);;
+ return IRQ_RETVAL(handled);
}
static void imxmci_tasklet_fnc(unsigned long data)
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 240608c..a461017 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1313,6 +1313,12 @@
struct mmc_spi_host *host;
int status;
+ /* We rely on full duplex transfers, mostly to reduce
+ * per-transfer overheads (by making fewer transfers).
+ */
+ if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
+ return -EINVAL;
+
/* MMC and SD specs only seem to care that sampling is on the
* rising edge ... meaning SPI modes 0 or 3. So either SPI mode
* should be legit. We'll use mode 0 since the steady state is 0,
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index b56d72f..34e2348 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -384,7 +384,7 @@
u16 val[2] = {0, 0};
val[0] = mvsd_read(MVSD_FIFO);
val[1] = mvsd_read(MVSD_FIFO);
- memcpy(p, &val, s);
+ memcpy(p, ((void *)&val) + 4 - s, s);
s = 0;
intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
}
@@ -423,7 +423,7 @@
if (s < 4) {
if (s && (intr_status & MVSD_NOR_TX_AVAIL)) {
u16 val[2] = {0, 0};
- memcpy(&val, p, s);
+ memcpy(((void *)&val) + 4 - s, p, s);
mvsd_write(MVSD_FIFO, val[0]);
mvsd_write(MVSD_FIFO, val[1]);
s = 0;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d7d7109..e55ac79 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -168,12 +168,12 @@
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
- dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
+ dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
DRCMR(host->dma_drcmrtx) = 0;
DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
} else {
host->dma_dir = DMA_TO_DEVICE;
- dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
+ dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
DRCMR(host->dma_drcmrrx) = 0;
DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
}
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index d79fa55..1e8aa590 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -158,6 +158,13 @@
return of_host->clock;
}
+static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_of_host *of_host = sdhci_priv(host);
+
+ return of_host->clock / 256 / 16;
+}
+
static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host)
{
struct sdhci_of_host *of_host = sdhci_priv(host);
@@ -184,6 +191,7 @@
.set_clock = esdhc_set_clock,
.enable_dma = esdhc_enable_dma,
.get_max_clock = esdhc_get_max_clock,
+ .get_min_clock = esdhc_get_min_clock,
.get_timeout_clock = esdhc_get_timeout_clock,
},
};
@@ -226,7 +234,7 @@
return -ENODEV;
host = sdhci_alloc_host(&ofdev->dev, sizeof(*of_host));
- if (!host)
+ if (IS_ERR(host))
return -ENOMEM;
of_host = sdhci_priv(host);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6779b4e..fc96f8c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -773,8 +773,14 @@
}
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
- sg_miter_start(&host->sg_miter,
- data->sg, data->sg_len, SG_MITER_ATOMIC);
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->blocks = data->blocks;
}
@@ -1766,7 +1772,10 @@
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
- mmc->f_min = host->max_clk / 256;
+ if (host->ops->get_min_clock)
+ mmc->f_min = host->ops->get_min_clock(host);
+ else
+ mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_SDIO_IRQ;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 831ddf7..c77e9ff 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -302,6 +302,7 @@
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
+ unsigned int (*get_min_clock)(struct sdhci_host *host);
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
};
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 5011fa7..1479da6 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -194,7 +194,7 @@
parts[this_part].name = extra_mem;
extra_mem += name_len + 1;
- dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n",
+ dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n",
this_part,
parts[this_part].name,
parts[this_part].offset,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 59c4612..ae5fe91 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
#define SR_SRWD 0x80 /* SR write protect */
/* Define max times to check status register before we give up. */
-#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */
+#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
#define CMD_SIZE 4
#ifdef CONFIG_M25PXX_USE_FAST_READ
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 73f0522..d8cf29c 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -226,7 +226,7 @@
if (!desperate && inftl->numfreeEUNs < 2) {
DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free "
"EUNs (%d)\n", inftl->numfreeEUNs);
- return 0xffff;
+ return BLOCK_NIL;
}
/* Scan for a free block */
@@ -281,7 +281,8 @@
silly = MAX_LOOPS;
while (thisEUN < inftl->nb_blocks) {
for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) {
- if ((BlockMap[block] != 0xffff) || BlockDeleted[block])
+ if ((BlockMap[block] != BLOCK_NIL) ||
+ BlockDeleted[block])
continue;
if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize)
@@ -525,7 +526,7 @@
if (!silly--) {
printk(KERN_WARNING "INFTL: infinite loop in "
"Virtual Unit Chain 0x%x\n", thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
/* Skip to next block in chain */
@@ -549,7 +550,7 @@
* waiting to be picked up. We're going to have to fold
* a chain to make room.
*/
- thisEUN = INFTL_makefreeblock(inftl, 0xffff);
+ thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL);
/*
* Hopefully we free something, lets try again.
@@ -631,7 +632,7 @@
printk(KERN_WARNING "INFTL: error folding to make room for Virtual "
"Unit Chain 0x%x\n", thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
/*
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 0b98654..7a58bd5 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -284,13 +284,6 @@
BE VERY CAREFUL.
-config MTD_SBC8240
- tristate "Flash device on SBC8240"
- depends on MTD_JEDECPROBE && 8260
- help
- Flash access on the SBC8240 board from Wind River. See
- <http://www.windriver.com/products/sbc8240/>
-
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
depends on MTD_CFI && TQM8xxL
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 8bae7f9..5beb066 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -50,7 +50,6 @@
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
-obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index b08a798..2aac41b 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -42,10 +42,8 @@
#include <mach/hardware.h>
#include <asm/system.h>
-#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2)
-
struct armflash_subdev_info {
- char name[SUBDEV_NAME_SIZE];
+ char *name;
struct mtd_info *mtd;
struct map_info map;
struct flash_platform_data *plat;
@@ -134,6 +132,8 @@
map_destroy(subdev->mtd);
if (subdev->map.virt)
iounmap(subdev->map.virt);
+ kfree(subdev->name);
+ subdev->name = NULL;
release_mem_region(subdev->map.phys, subdev->map.size);
}
@@ -177,16 +177,22 @@
if (nr == 1)
/* No MTD concatenation, just use the default name */
- snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s",
- dev_name(&dev->dev));
+ subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
else
- snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d",
- dev_name(&dev->dev), i);
+ subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
+ dev_name(&dev->dev), i);
+ if (!subdev->name) {
+ err = -ENOMEM;
+ break;
+ }
subdev->plat = plat;
err = armflash_subdev_probe(subdev, res);
- if (err)
+ if (err) {
+ kfree(subdev->name);
+ subdev->name = NULL;
break;
+ }
}
info->nr_subdev = i;
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
deleted file mode 100644
index d5374cd..0000000
--- a/drivers/mtd/maps/sbc8240.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines on the SBC8240 board.
- *
- * Carolyn Smith, Tektronix, Inc.
- *
- * This code is GPLed
- */
-
-/*
- * The SBC8240 has 2 flash banks.
- * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors.
- * It contains the U-Boot code (7 sectors) and the environment (1 sector).
- * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector,
- * 2 x 8 KiB sectors, 1 x 16 KiB sectors.
- * Both parts are JEDEC compatible.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#define DEBUG
-
-#ifdef DEBUG
-# define debugk(fmt,args...) printk(fmt ,##args)
-#else
-# define debugk(fmt,args...)
-#endif
-
-
-#define WINDOW_ADDR0 0xFFF00000 /* 512 KiB */
-#define WINDOW_SIZE0 0x00080000
-#define BUSWIDTH0 1
-
-#define WINDOW_ADDR1 0xFF000000 /* 4 MiB */
-#define WINDOW_SIZE1 0x00400000
-#define BUSWIDTH1 8
-
-#define MSG_PREFIX "sbc8240:" /* prefix for our printk()'s */
-#define MTDID "sbc8240-%d" /* for mtdparts= partitioning */
-
-
-static struct map_info sbc8240_map[2] = {
- {
- .name = "sbc8240 Flash Bank #0",
- .size = WINDOW_SIZE0,
- .bankwidth = BUSWIDTH0,
- },
- {
- .name = "sbc8240 Flash Bank #1",
- .size = WINDOW_SIZE1,
- .bankwidth = BUSWIDTH1,
- }
-};
-
-#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map)
-
-/*
- * The following defines the partition layout of SBC8240 boards.
- *
- * See include/linux/mtd/partitions.h for definition of the
- * mtd_partition structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size
- * which is not necessarily the actual flash size. It must correspond
- * to the value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition sbc8240_uboot_partitions [] = {
- /* Bank 0 */
- {
- .name = "U-boot", /* U-Boot Firmware */
- .offset = 0,
- .size = 0x00070000, /* 7 x 64 KiB sectors */
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "environment", /* U-Boot environment */
- .offset = 0x00070000,
- .size = 0x00010000, /* 1 x 64 KiB sector */
- },
-};
-
-static struct mtd_partition sbc8240_fs_partitions [] = {
- {
- .name = "jffs", /* JFFS filesystem */
- .offset = 0,
- .size = 0x003C0000, /* 4 * 15 * 64KiB */
- },
- {
- .name = "tmp32",
- .offset = 0x003C0000,
- .size = 0x00020000, /* 4 * 32KiB */
- },
- {
- .name = "tmp8a",
- .offset = 0x003E0000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp8b",
- .offset = 0x003E8000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp16",
- .offset = 0x003F0000,
- .size = 0x00010000, /* 4 * 16KiB */
- }
-};
-
-/* trivial struct to describe partition information */
-struct mtd_part_def
-{
- int nums;
- unsigned char *type;
- struct mtd_partition* mtd_part;
-};
-
-static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS];
-static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS];
-
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-
-static int __init init_sbc8240_mtd (void)
-{
- static struct _cjs {
- u_long addr;
- u_long size;
- } pt[NUM_FLASH_BANKS] = {
- {
- .addr = WINDOW_ADDR0,
- .size = WINDOW_SIZE0
- },
- {
- .addr = WINDOW_ADDR1,
- .size = WINDOW_SIZE1
- },
- };
-
- int devicesfound = 0;
- int i,j;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- printk (KERN_NOTICE MSG_PREFIX
- "Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr);
-
- sbc8240_map[i].map_priv_1 =
- (unsigned long) ioremap (pt[i].addr, pt[i].size);
- if (!sbc8240_map[i].map_priv_1) {
- printk (MSG_PREFIX "failed to ioremap\n");
- for (j = 0; j < i; j++) {
- iounmap((void *) sbc8240_map[j].map_priv_1);
- sbc8240_map[j].map_priv_1 = 0;
- }
- return -EIO;
- }
- simple_map_init(&sbc8240_mtd[i]);
-
- sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]);
-
- if (sbc8240_mtd[i]) {
- sbc8240_mtd[i]->module = THIS_MODULE;
- devicesfound++;
- } else {
- if (sbc8240_map[i].map_priv_1) {
- iounmap((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
- }
-
- if (!devicesfound) {
- printk(KERN_NOTICE MSG_PREFIX
- "No suppported flash chips found!\n");
- return -ENXIO;
- }
-
-#ifdef CONFIG_MTD_PARTITIONS
- sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions;
- sbc8240_part_banks[0].type = "static image";
- sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions);
- sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions;
- sbc8240_part_banks[1].type = "static file system";
- sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions);
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
-
- if (!sbc8240_mtd[i]) continue;
- if (sbc8240_part_banks[i].nums == 0) {
- printk (KERN_NOTICE MSG_PREFIX
- "No partition info available, registering whole device\n");
- add_mtd_device(sbc8240_mtd[i]);
- } else {
- printk (KERN_NOTICE MSG_PREFIX
- "Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
- add_mtd_partitions (sbc8240_mtd[i],
- sbc8240_part_banks[i].mtd_part,
- sbc8240_part_banks[i].nums);
- }
- }
-#else
- printk(KERN_NOTICE MSG_PREFIX
- "Registering %d flash banks at once\n", devicesfound);
-
- for (i = 0; i < devicesfound; i++) {
- add_mtd_device(sbc8240_mtd[i]);
- }
-#endif /* CONFIG_MTD_PARTITIONS */
-
- return devicesfound == 0 ? -ENXIO : 0;
-}
-
-static void __exit cleanup_sbc8240_mtd (void)
-{
- int i;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- if (sbc8240_mtd[i]) {
- del_mtd_device (sbc8240_mtd[i]);
- map_destroy (sbc8240_mtd[i]);
- }
- if (sbc8240_map[i].map_priv_1) {
- iounmap ((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
-}
-
-module_init (init_sbc8240_mtd);
-module_exit (cleanup_sbc8240_mtd);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
-MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
-
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index c3f6265..7baba40 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -144,7 +144,7 @@
struct mtd_blktrans_ops *tr = dev->tr;
int ret = -ENODEV;
- if (!try_module_get(dev->mtd->owner))
+ if (!get_mtd_device(NULL, dev->mtd->index))
goto out;
if (!try_module_get(tr->owner))
@@ -158,7 +158,7 @@
ret = 0;
if (tr->open && (ret = tr->open(dev))) {
dev->mtd->usecount--;
- module_put(dev->mtd->owner);
+ put_mtd_device(dev->mtd);
out_tr:
module_put(tr->owner);
}
@@ -177,7 +177,7 @@
if (!ret) {
dev->mtd->usecount--;
- module_put(dev->mtd->owner);
+ put_mtd_device(dev->mtd);
module_put(tr->owner);
}
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 208c6fa..77db5ce 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -29,6 +29,8 @@
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
} *mtdblks[MAX_MTD_DEVICES];
+static struct mutex mtdblks_lock;
+
/*
* Cache stuff...
*
@@ -270,15 +272,19 @@
DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n");
+ mutex_lock(&mtdblks_lock);
if (mtdblks[dev]) {
mtdblks[dev]->count++;
+ mutex_unlock(&mtdblks_lock);
return 0;
}
/* OK, it's not open. Create cache info for it */
mtdblk = kzalloc(sizeof(struct mtdblk_dev), GFP_KERNEL);
- if (!mtdblk)
+ if (!mtdblk) {
+ mutex_unlock(&mtdblks_lock);
return -ENOMEM;
+ }
mtdblk->count = 1;
mtdblk->mtd = mtd;
@@ -291,6 +297,7 @@
}
mtdblks[dev] = mtdblk;
+ mutex_unlock(&mtdblks_lock);
DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
@@ -304,6 +311,8 @@
DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n");
+ mutex_lock(&mtdblks_lock);
+
mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
mutex_unlock(&mtdblk->cache_mutex);
@@ -316,6 +325,9 @@
vfree(mtdblk->cache_data);
kfree(mtdblk);
}
+
+ mutex_unlock(&mtdblks_lock);
+
DEBUG(MTD_DEBUG_LEVEL1, "ok\n");
return 0;
@@ -376,6 +388,8 @@
static int __init init_mtdblock(void)
{
+ mutex_init(&mtdblks_lock);
+
return register_mtd_blktrans(&mtdblock_tr);
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index fac54a3..00ebf7a 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -65,8 +65,8 @@
static int mtd_cls_suspend(struct device *dev, pm_message_t state)
{
struct mtd_info *mtd = dev_to_mtd(dev);
-
- if (mtd->suspend)
+
+ if (mtd && mtd->suspend)
return mtd->suspend(mtd);
else
return 0;
@@ -76,7 +76,7 @@
{
struct mtd_info *mtd = dev_to_mtd(dev);
- if (mtd->resume)
+ if (mtd && mtd->resume)
mtd->resume(mtd);
return 0;
}
@@ -298,6 +298,7 @@
mtd->dev.class = &mtd_class;
mtd->dev.devt = MTD_DEVT(i);
dev_set_name(&mtd->dev, "mtd%d", i);
+ dev_set_drvdata(&mtd->dev, mtd);
if (device_register(&mtd->dev) != 0) {
mtd_table[i] = NULL;
break;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 2802992..20c828b 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -534,7 +534,7 @@
&num_partitions);
if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
+ printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
res = ENXIO;
goto err_no_partitions;
}
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0cd76f8..ebd07e9 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -11,6 +11,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -541,7 +543,7 @@
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
unsigned long timeo = jiffies;
- int status, state = this->state;
+ int status = NAND_STATUS_FAIL, state = this->state;
if (state == FL_ERASING)
timeo += (HZ * 400) / 1000;
@@ -556,8 +558,9 @@
while (time_before(jiffies, timeo)) {
status = __raw_readb(this->IO_ADDR_R);
- if (!(status & 0x40))
+ if (status & NAND_STATUS_READY)
break;
+ cond_resched();
}
return status;
}
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index e3f8495..fb86cac 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -208,7 +208,7 @@
/* Normally, we force a fold to happen before we run out of free blocks completely */
if (!desperate && nftl->numfreeEUNs < 2) {
DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n");
- return 0xffff;
+ return BLOCK_NIL;
}
/* Scan for a free block */
@@ -230,11 +230,11 @@
printk("Argh! No free blocks found! LastFreeEUN = %d, "
"FirstEUN = %d\n", nftl->LastFreeEUN,
le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN));
- return 0xffff;
+ return BLOCK_NIL;
}
} while (pot != nftl->LastFreeEUN);
- return 0xffff;
+ return BLOCK_NIL;
}
static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock )
@@ -431,7 +431,7 @@
/* add the header so that it is now a valid chain */
oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC);
- oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff;
+ oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL;
nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8,
8, &retlen, (char *)&oob.u);
@@ -515,7 +515,7 @@
if (ChainLength < 2) {
printk(KERN_WARNING "No Virtual Unit Chains available for folding. "
"Failing request\n");
- return 0xffff;
+ return BLOCK_NIL;
}
return NFTL_foldchain (nftl, LongestChain, pendingblock);
@@ -578,7 +578,7 @@
printk(KERN_WARNING
"Infinite loop in Virtual Unit Chain 0x%x\n",
thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
/* Skip to next block in chain */
@@ -601,7 +601,7 @@
//u16 startEUN = nftl->EUNtable[thisVUC];
//printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC);
- writeEUN = NFTL_makefreeblock(nftl, 0xffff);
+ writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL);
if (writeEUN == BLOCK_NIL) {
/* OK, we accept that the above comment is
@@ -673,7 +673,7 @@
printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n",
thisVUC);
- return 0xffff;
+ return BLOCK_NIL;
}
static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block,
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 38d656b..0108ed4 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -266,7 +266,7 @@
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
- return mtd->writesize;
+ return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
@@ -770,6 +770,7 @@
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ gpmc_cs_free(c->gpmc_cs);
kfree(c);
return 0;
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 286ed59..e1f7d0a 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -657,6 +657,11 @@
if (ubi->mtd->block_isbad && ubi->mtd->block_markbad)
ubi->bad_allowed = 1;
+ if (ubi->mtd->type == MTD_NORFLASH) {
+ ubi_assert(ubi->mtd->writesize == 1);
+ ubi->nor_flash = 1;
+ }
+
ubi->min_io_size = ubi->mtd->writesize;
ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
@@ -996,6 +1001,7 @@
ubi_msg("number of PEBs reserved for bad PEB handling: %d",
ubi->beb_rsvd_pebs);
ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+ ubi_msg("image sequence number: %d", ubi->image_seq);
/*
* The below lock makes sure we do not race with 'ubi_thread()' which
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index c0ed60e..54b0186 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -44,6 +44,8 @@
be32_to_cpu(ec_hdr->vid_hdr_offset));
printk(KERN_DEBUG "\tdata_offset %d\n",
be32_to_cpu(ec_hdr->data_offset));
+ printk(KERN_DEBUG "\timage_seq %d\n",
+ be32_to_cpu(ec_hdr->image_seq));
printk(KERN_DEBUG "\thdr_crc %#08x\n",
be32_to_cpu(ec_hdr->hdr_crc));
printk(KERN_DEBUG "erase counter header hexdump:\n");
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index 13777e5..a4da7a0 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -93,6 +93,12 @@
#define UBI_IO_DEBUG 0
#endif
+#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
+#else
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
+#endif
+
#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
#define DBG_DISABLE_BGT 1
#else
@@ -167,6 +173,7 @@
#define ubi_dbg_is_bitflip() 0
#define ubi_dbg_is_write_failure() 0
#define ubi_dbg_is_erase_failure() 0
+#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0
#endif /* !CONFIG_MTD_UBI_DEBUG */
#endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 0f2034c..e4d9ef0 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1254,6 +1254,7 @@
if (!ubi->volumes[i])
continue;
kfree(ubi->volumes[i]->eba_tbl);
+ ubi->volumes[i]->eba_tbl = NULL;
}
return err;
}
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 95aaac0..b5e478f 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -332,6 +332,7 @@
}
gluebi->vol_id = vi->vol_id;
+ gluebi->ubi_num = vi->ubi_num;
mtd->type = MTD_UBIVOLUME;
if (!di->ro_mode)
mtd->flags = MTD_WRITEABLE;
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index effaff2..4cb6992 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -98,17 +98,12 @@
static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
const struct ubi_vid_hdr *vid_hdr);
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
- int len);
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum);
#else
#define paranoid_check_not_bad(ubi, pnum) 0
#define paranoid_check_peb_ec_hdr(ubi, pnum) 0
#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0
#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#define paranoid_check_all_ff(ubi, pnum, offset, len) 0
-#define paranoid_check_empty(ubi, pnum) 0
#endif
/**
@@ -244,7 +239,7 @@
return err > 0 ? -EINVAL : err;
/* The area we are writing to has to contain all 0xFF bytes */
- err = paranoid_check_all_ff(ubi, pnum, offset, len);
+ err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
if (err)
return err > 0 ? -EINVAL : err;
@@ -271,8 +266,8 @@
addr = (loff_t)pnum * ubi->peb_size + offset;
err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf);
if (err) {
- ubi_err("error %d while writing %d bytes to PEB %d:%d, written"
- " %zd bytes", err, len, pnum, offset, written);
+ ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
+ "%zd bytes", err, len, pnum, offset, written);
ubi_dbg_dump_stack();
} else
ubi_assert(written == len);
@@ -350,7 +345,7 @@
return -EIO;
}
- err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+ err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
if (err)
return err > 0 ? -EINVAL : err;
@@ -459,6 +454,54 @@
}
/**
+ * nor_erase_prepare - prepare a NOR flash PEB for erasure.
+ * @ubi: UBI device description object
+ * @pnum: physical eraseblock number to prepare
+ *
+ * NOR flash, or at least some of them, have peculiar embedded PEB erasure
+ * algorithm: the PEB is first filled with zeroes, then it is erased. And
+ * filling with zeroes starts from the end of the PEB. This was observed with
+ * Spansion S29GL512N NOR flash.
+ *
+ * This means that in case of a power cut we may end up with intact data at the
+ * beginning of the PEB, and all zeroes at the end of PEB. In other words, the
+ * EC and VID headers are OK, but a large chunk of data at the end of PEB is
+ * zeroed. This makes UBI mistakenly treat this PEB as used and associate it
+ * with an LEB, which leads to subsequent failures (e.g., UBIFS fails).
+ *
+ * This function is called before erasing NOR PEBs and it zeroes out EC and VID
+ * magic numbers in order to invalidate them and prevent the failures. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
+{
+ int err;
+ size_t written;
+ loff_t addr;
+ uint32_t data = 0;
+
+ addr = (loff_t)pnum * ubi->peb_size;
+ err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+ if (err) {
+ ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+ "%zd bytes", err, pnum, 0, written);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ addr += ubi->vid_hdr_aloffset;
+ err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
+ if (err) {
+ ubi_err("error %d while writing 4 bytes to PEB %d:%d, written "
+ "%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written);
+ ubi_dbg_dump_stack();
+ return err;
+ }
+
+ return 0;
+}
+
+/**
* ubi_io_sync_erase - synchronously erase a physical eraseblock.
* @ubi: UBI device description object
* @pnum: physical eraseblock number to erase
@@ -489,6 +532,12 @@
return -EROFS;
}
+ if (ubi->nor_flash) {
+ err = nor_erase_prepare(ubi, pnum);
+ if (err)
+ return err;
+ }
+
if (torture) {
ret = torture_peb(ubi, pnum);
if (ret < 0)
@@ -672,11 +721,6 @@
if (read_err != -EBADMSG &&
check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
/* The physical eraseblock is supposedly empty */
- err = paranoid_check_all_ff(ubi, pnum, 0,
- ubi->peb_size);
- if (err)
- return err > 0 ? UBI_IO_BAD_EC_HDR : err;
-
if (verbose)
ubi_warn("no EC header found at PEB %d, "
"only 0xFF bytes", pnum);
@@ -752,6 +796,7 @@
ec_hdr->version = UBI_VERSION;
ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset);
ec_hdr->data_offset = cpu_to_be32(ubi->leb_start);
+ ec_hdr->image_seq = cpu_to_be32(ubi->image_seq);
crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
ec_hdr->hdr_crc = cpu_to_be32(crc);
@@ -947,15 +992,6 @@
if (read_err != -EBADMSG &&
check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
/* The physical eraseblock is supposedly free */
-
- /*
- * The below is just a paranoid check, it has to be
- * compiled out if paranoid checks are disabled.
- */
- err = paranoid_check_empty(ubi, pnum);
- if (err)
- return err > 0 ? UBI_IO_BAD_VID_HDR : err;
-
if (verbose)
ubi_warn("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
@@ -1229,7 +1265,7 @@
}
/**
- * paranoid_check_all_ff - check that a region of flash is empty.
+ * ubi_dbg_check_all_ff - check that a region of flash is empty.
* @ubi: UBI device description object
* @pnum: the physical eraseblock number to check
* @offset: the starting offset within the physical eraseblock to check
@@ -1239,8 +1275,7 @@
* @offset of the physical eraseblock @pnum, %1 if not, and a negative error
* code if an error occurred.
*/
-static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
- int len)
+int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
{
size_t read;
int err;
@@ -1276,74 +1311,4 @@
return err;
}
-/**
- * paranoid_check_empty - whether a PEB is empty.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to check
- *
- * This function makes sure PEB @pnum is empty, which means it contains only
- * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a
- * negative error code in case of failure.
- *
- * Empty PEBs have the EC header, and do not have the VID header. The caller of
- * this function should have already made sure the PEB does not have the VID
- * header. However, this function re-checks that, because it is possible that
- * the header and data has already been written to the PEB.
- *
- * Let's consider a possible scenario. Suppose there are 2 tasks - A and B.
- * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to
- * find which LEB it corresponds to. PEB X is currently unmapped, and has no
- * VID header. Task B is trying to write to PEB X.
- *
- * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The
- * read data contain all 0xFF bytes;
- * Task B: writes VID header and some data to PEB X;
- * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we
- * do not re-read the VID header, and do not cancel the checking if it
- * is there, we fail.
- */
-static int paranoid_check_empty(struct ubi_device *ubi, int pnum)
-{
- int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize;
- size_t read;
- uint32_t magic;
- const struct ubi_vid_hdr *vid_hdr;
-
- mutex_lock(&ubi->dbg_buf_mutex);
- err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf);
- if (err && err != -EUCLEAN) {
- ubi_err("error %d while reading %d bytes from PEB %d:%d, "
- "read %zd bytes", err, len, pnum, offs, read);
- goto error;
- }
-
- vid_hdr = ubi->dbg_peb_buf;
- magic = be32_to_cpu(vid_hdr->magic);
- if (magic == UBI_VID_HDR_MAGIC)
- /* The PEB contains VID header, so it is not empty */
- goto out;
-
- err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
- if (err == 0) {
- ubi_err("flash region at PEB %d:%d, length %d does not "
- "contain all 0xFF bytes", pnum, offs, len);
- goto fail;
- }
-
-out:
- mutex_unlock(&ubi->dbg_buf_mutex);
- return 0;
-
-fail:
- ubi_err("paranoid check failed for PEB %d", pnum);
- ubi_msg("hex dump of the %d-%d region", offs, offs + len);
- print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
- ubi->dbg_peb_buf, len, 1);
- err = 1;
-error:
- ubi_dbg_dump_stack();
- mutex_unlock(&ubi->dbg_buf_mutex);
- return err;
-}
-
#endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index c3d653b..b847745 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -757,6 +757,8 @@
si->is_empty = 0;
if (!ec_corr) {
+ int image_seq;
+
/* Make sure UBI version is OK */
if (ech->version != UBI_VERSION) {
ubi_err("this UBI version is %d, image version is %d",
@@ -778,6 +780,29 @@
ubi_dbg_dump_ec_hdr(ech);
return -EINVAL;
}
+
+ /*
+ * Make sure that all PEBs have the same image sequence number.
+ * This allows us to detect situations when users flash UBI
+ * images incorrectly, so that the flash has the new UBI image
+ * and leftovers from the old one. This feature was added
+ * relatively recently, and the sequence number was always
+ * zero, because old UBI implementations always set it to zero.
+ * For this reasons, we do not panic if some PEBs have zero
+ * sequence number, while other PEBs have non-zero sequence
+ * number.
+ */
+ image_seq = be32_to_cpu(ech->image_seq);
+ if (!si->image_seq_set) {
+ ubi->image_seq = image_seq;
+ si->image_seq_set = 1;
+ } else if (ubi->image_seq && ubi->image_seq != image_seq) {
+ ubi_err("bad image sequence number %d in PEB %d, "
+ "expected %d", image_seq, pnum, ubi->image_seq);
+ ubi_dbg_dump_ec_hdr(ech);
+ return -EINVAL;
+ }
+
}
/* OK, we've done with the EC header, let's look at the VID header */
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
index 61df208..1017cf1 100644
--- a/drivers/mtd/ubi/scan.h
+++ b/drivers/mtd/ubi/scan.h
@@ -102,6 +102,7 @@
* @mean_ec: mean erase counter value
* @ec_sum: a temporary variable used when calculating @mean_ec
* @ec_count: a temporary variable used when calculating @mean_ec
+ * @image_seq_set: indicates @ubi->image_seq is known
*
* This data structure contains the result of scanning and may be used by other
* UBI sub-systems to build final UBI data structures, further error-recovery
@@ -124,6 +125,7 @@
int mean_ec;
uint64_t ec_sum;
int ec_count;
+ int image_seq_set;
};
struct ubi_device;
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 8419fdc..503ea9b 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -129,6 +129,7 @@
* @ec: the erase counter
* @vid_hdr_offset: where the VID header starts
* @data_offset: where the user data start
+ * @image_seq: image sequence number
* @padding2: reserved for future, zeroes
* @hdr_crc: erase counter header CRC checksum
*
@@ -144,6 +145,14 @@
* volume identifier header and user data, relative to the beginning of the
* physical eraseblock. These values have to be the same for all physical
* eraseblocks.
+ *
+ * The @image_seq field is used to validate a UBI image that has been prepared
+ * for a UBI device. The @image_seq value can be any value, but it must be the
+ * same on all eraseblocks. UBI will ensure that all new erase counter headers
+ * also contain this value, and will check the value when scanning at start-up.
+ * One way to make use of @image_seq is to increase its value by one every time
+ * an image is flashed over an existing image, then, if the flashing does not
+ * complete, UBI will detect the error when scanning.
*/
struct ubi_ec_hdr {
__be32 magic;
@@ -152,7 +161,8 @@
__be64 ec; /* Warning: the current limit is 31-bit anyway! */
__be32 vid_hdr_offset;
__be32 data_offset;
- __u8 padding2[36];
+ __be32 image_seq;
+ __u8 padding2[32];
__be32 hdr_crc;
} __attribute__ ((packed));
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 28acd13..6a5fe96 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -301,6 +301,7 @@
* @vol->readers, @vol->writers, @vol->exclusive,
* @vol->ref_count, @vol->mapping and @vol->eba_tbl.
* @ref_count: count of references on the UBI device
+ * @image_seq: image sequence number recorded on EC headers
*
* @rsvd_pebs: count of reserved physical eraseblocks
* @avail_pebs: count of available physical eraseblocks
@@ -372,6 +373,7 @@
* @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
* not
+ * @nor_flash: non-zero if working on top of NOR flash
* @mtd: MTD device descriptor
*
* @peb_buf1: a buffer of PEB size used for different purposes
@@ -390,6 +392,7 @@
struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT];
spinlock_t volumes_lock;
int ref_count;
+ int image_seq;
int rsvd_pebs;
int avail_pebs;
@@ -452,7 +455,8 @@
int vid_hdr_offset;
int vid_hdr_aloffset;
int vid_hdr_shift;
- int bad_allowed;
+ unsigned int bad_allowed:1;
+ unsigned int nor_flash:1;
struct mtd_info *mtd;
void *peb_buf1;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 2b24723..600c722 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -459,6 +459,14 @@
dbg_wl("PEB %d EC %d", e->pnum, e->ec);
prot_queue_add(ubi, e);
spin_unlock(&ubi->wl_lock);
+
+ err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
+ ubi->peb_size - ubi->vid_hdr_aloffset);
+ if (err) {
+ ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
+ return err > 0 ? -EINVAL : err;
+ }
+
return e->pnum;
}
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 3e00fa8..4a7c328 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -832,7 +832,9 @@
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
}
- vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
+ if (i != 0)
+ vp->rx_ring[i - 1].next =
+ isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
}
if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c34aee9..c204168 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -2721,13 +2721,15 @@
&vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
issue_and_wait(dev, DownStall);
for (i = 0; i < TX_RING_SIZE; i++) {
- pr_err(" %d: @%p length %8.8x status %8.8x\n", i,
- &vp->tx_ring[i],
+ unsigned int length;
+
#if DO_ZEROCOPY
- le32_to_cpu(vp->tx_ring[i].frag[0].length),
+ length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
#else
- le32_to_cpu(vp->tx_ring[i].length),
+ length = le32_to_cpu(vp->tx_ring[i].length);
#endif
+ pr_err(" %d: @%p length %8.8x status %8.8x\n",
+ i, &vp->tx_ring[i], length,
le32_to_cpu(vp->tx_ring[i].status));
}
if (!stalled)
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 8ae72ec..0e2ba21 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -908,6 +908,7 @@
.ndo_open = rtl8139_open,
.ndo_stop = rtl8139_close,
.ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = rtl8139_set_mac_address,
.ndo_start_xmit = rtl8139_start_xmit,
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c155bd3..5f6509a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1729,6 +1729,13 @@
help
This platform driver is for Micrel KSZ8842 chip.
+config KS8851
+ tristate "Micrel KS8851 SPI"
+ depends on SPI
+ select MII
+ help
+ SPI driver for Micrel KS8851 SPI attached network chip.
+
config VIA_RHINE
tristate "VIA Rhine support"
depends on NET_PCI && PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4b58a59..ead8cab 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -88,6 +88,7 @@
obj-$(CONFIG_SKY2) += sky2.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_KS8842) += ks8842.o
+obj-$(CONFIG_KS8851) += ks8851.o
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 85a1817..08787f5 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -569,16 +569,8 @@
#ifdef DEBUG_DRIVER
/* dump the packet */
- {
- int i;
-
- for (i = 0; i < 64; i++) {
- if ((i % 16) == 0)
- printk("\n" KERN_DEBUG);
- printk ("%2.2x ", skb->data [i]);
- }
- printk("\n");
- }
+ print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE,
+ 16, 1, skb->data, 64, true);
#endif
entry = lp->tx_new & lp->tx_ring_mod_mask;
ib->btx_ring [entry].length = (-skblen) | 0xf000;
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index d6d4ab3..7d227cda 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -158,15 +158,12 @@
void arcnet_dump_skb(struct net_device *dev,
struct sk_buff *skb, char *desc)
{
- int i;
+ char hdr[32];
- printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc);
- for (i = 0; i < skb->len; i++) {
- if (i % 16 == 0)
- printk("\n" KERN_DEBUG "[%04X] ", i);
- printk("%02X ", ((u_char *) skb->data)[i]);
- }
- printk("\n");
+ /* dump the packet */
+ snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc);
+ print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+ 16, 1, skb->data, skb->len, true);
}
EXPORT_SYMBOL(arcnet_dump_skb);
@@ -184,6 +181,7 @@
int i, length;
unsigned long flags = 0;
static uint8_t buf[512];
+ char hdr[32];
/* hw.copy_from_card expects IRQ context so take the IRQ lock
to keep it single threaded */
@@ -197,14 +195,10 @@
/* if the offset[0] byte is nonzero, this is a 256-byte packet */
length = (buf[2] ? 256 : 512);
- printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc);
- for (i = 0; i < length; i++) {
- if (i % 16 == 0)
- printk("\n" KERN_DEBUG "[%04X] ", i);
- printk("%02X ", buf[i]);
- }
- printk("\n");
-
+ /* dump the packet */
+ snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc);
+ print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET,
+ 16, 1, buf, length, true);
}
#else
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 2895db1..c37ee9e 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -63,3 +63,11 @@
help
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
+
+config W90P910_ETH
+ tristate "Nuvoton w90p910 Ethernet support"
+ depends on ARM && ARCH_W90X900
+ select PHYLIB
+ help
+ Say Y here if you want to use built-in Ethernet ports
+ on w90p910 processor.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 811a3cc..303171f 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 2e7419a..5041d10 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -1228,7 +1228,6 @@
#endif
static struct platform_driver at91ether_driver = {
- .probe = at91ether_probe,
.remove = __devexit_p(at91ether_remove),
.suspend = at91ether_suspend,
.resume = at91ether_resume,
@@ -1240,7 +1239,7 @@
static int __init at91ether_init(void)
{
- return platform_driver_register(&at91ether_driver);
+ return platform_driver_probe(&at91ether_driver, at91ether_probe);
}
static void __exit at91ether_exit(void)
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 6f42ad7..3fe0987 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -1142,7 +1142,9 @@
.ndo_start_xmit = eth_xmit,
.ndo_set_multicast_list = eth_set_mcast_list,
.ndo_do_ioctl = eth_ioctl,
-
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
static int __devinit eth_init_one(struct platform_device *pdev)
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
new file mode 100644
index 0000000..616fb79
--- /dev/null
+++ b/drivers/net/arm/w90p910_ether.c
@@ -0,0 +1,1105 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#define DRV_MODULE_NAME "w90p910-emc"
+#define DRV_MODULE_VERSION "0.1"
+
+/* Ethernet MAC Registers */
+#define REG_CAMCMR 0x00
+#define REG_CAMEN 0x04
+#define REG_CAMM_BASE 0x08
+#define REG_CAML_BASE 0x0c
+#define REG_TXDLSA 0x88
+#define REG_RXDLSA 0x8C
+#define REG_MCMDR 0x90
+#define REG_MIID 0x94
+#define REG_MIIDA 0x98
+#define REG_FFTCR 0x9C
+#define REG_TSDR 0xa0
+#define REG_RSDR 0xa4
+#define REG_DMARFC 0xa8
+#define REG_MIEN 0xac
+#define REG_MISTA 0xb0
+#define REG_CTXDSA 0xcc
+#define REG_CTXBSA 0xd0
+#define REG_CRXDSA 0xd4
+#define REG_CRXBSA 0xd8
+
+/* mac controller bit */
+#define MCMDR_RXON 0x01
+#define MCMDR_ACP (0x01 << 3)
+#define MCMDR_SPCRC (0x01 << 5)
+#define MCMDR_TXON (0x01 << 8)
+#define MCMDR_FDUP (0x01 << 18)
+#define MCMDR_ENMDC (0x01 << 19)
+#define MCMDR_OPMOD (0x01 << 20)
+#define SWR (0x01 << 24)
+
+/* cam command regiser */
+#define CAMCMR_AUP 0x01
+#define CAMCMR_AMP (0x01 << 1)
+#define CAMCMR_ABP (0x01 << 2)
+#define CAMCMR_CCAM (0x01 << 3)
+#define CAMCMR_ECMP (0x01 << 4)
+#define CAM0EN 0x01
+
+/* mac mii controller bit */
+#define MDCCR (0x0a << 20)
+#define PHYAD (0x01 << 8)
+#define PHYWR (0x01 << 16)
+#define PHYBUSY (0x01 << 17)
+#define PHYPRESP (0x01 << 18)
+#define CAM_ENTRY_SIZE 0x08
+
+/* rx and tx status */
+#define TXDS_TXCP (0x01 << 19)
+#define RXDS_CRCE (0x01 << 17)
+#define RXDS_PTLE (0x01 << 19)
+#define RXDS_RXGD (0x01 << 20)
+#define RXDS_ALIE (0x01 << 21)
+#define RXDS_RP (0x01 << 22)
+
+/* mac interrupt status*/
+#define MISTA_EXDEF (0x01 << 19)
+#define MISTA_TXBERR (0x01 << 24)
+#define MISTA_TDU (0x01 << 23)
+#define MISTA_RDU (0x01 << 10)
+#define MISTA_RXBERR (0x01 << 11)
+
+#define ENSTART 0x01
+#define ENRXINTR 0x01
+#define ENRXGD (0x01 << 4)
+#define ENRXBERR (0x01 << 11)
+#define ENTXINTR (0x01 << 16)
+#define ENTXCP (0x01 << 18)
+#define ENTXABT (0x01 << 21)
+#define ENTXBERR (0x01 << 24)
+#define ENMDC (0x01 << 19)
+#define PHYBUSY (0x01 << 17)
+#define MDCCR_VAL 0xa00000
+
+/* rx and tx owner bit */
+#define RX_OWEN_DMA (0x01 << 31)
+#define RX_OWEN_CPU (~(0x03 << 30))
+#define TX_OWEN_DMA (0x01 << 31)
+#define TX_OWEN_CPU (~(0x01 << 31))
+
+/* tx frame desc controller bit */
+#define MACTXINTEN 0x04
+#define CRCMODE 0x02
+#define PADDINGMODE 0x01
+
+/* fftcr controller bit */
+#define TXTHD (0x03 << 8)
+#define BLENGTH (0x01 << 20)
+
+/* global setting for driver */
+#define RX_DESC_SIZE 50
+#define TX_DESC_SIZE 10
+#define MAX_RBUFF_SZ 0x600
+#define MAX_TBUFF_SZ 0x600
+#define TX_TIMEOUT 50
+#define DELAY 1000
+#define CAM0 0x0
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg);
+
+struct w90p910_rxbd {
+ unsigned int sl;
+ unsigned int buffer;
+ unsigned int reserved;
+ unsigned int next;
+};
+
+struct w90p910_txbd {
+ unsigned int mode;
+ unsigned int buffer;
+ unsigned int sl;
+ unsigned int next;
+};
+
+struct recv_pdesc {
+ struct w90p910_rxbd desclist[RX_DESC_SIZE];
+ char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ];
+};
+
+struct tran_pdesc {
+ struct w90p910_txbd desclist[TX_DESC_SIZE];
+ char tran_buf[RX_DESC_SIZE][MAX_TBUFF_SZ];
+};
+
+struct w90p910_ether {
+ struct recv_pdesc *rdesc;
+ struct recv_pdesc *rdesc_phys;
+ struct tran_pdesc *tdesc;
+ struct tran_pdesc *tdesc_phys;
+ struct net_device_stats stats;
+ struct platform_device *pdev;
+ struct sk_buff *skb;
+ struct clk *clk;
+ struct clk *rmiiclk;
+ struct mii_if_info mii;
+ struct timer_list check_timer;
+ void __iomem *reg;
+ unsigned int rxirq;
+ unsigned int txirq;
+ unsigned int cur_tx;
+ unsigned int cur_rx;
+ unsigned int finish_tx;
+ unsigned int rx_packets;
+ unsigned int rx_bytes;
+ unsigned int start_tx_ptr;
+ unsigned int start_rx_ptr;
+ unsigned int linkflag;
+ spinlock_t lock;
+};
+
+static void update_linkspeed_register(struct net_device *dev,
+ unsigned int speed, unsigned int duplex)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+
+ if (speed == SPEED_100) {
+ /* 100 full/half duplex */
+ if (duplex == DUPLEX_FULL) {
+ val |= (MCMDR_OPMOD | MCMDR_FDUP);
+ } else {
+ val |= MCMDR_OPMOD;
+ val &= ~MCMDR_FDUP;
+ }
+ } else {
+ /* 10 full/half duplex */
+ if (duplex == DUPLEX_FULL) {
+ val |= MCMDR_FDUP;
+ val &= ~MCMDR_OPMOD;
+ } else {
+ val &= ~(MCMDR_FDUP | MCMDR_OPMOD);
+ }
+ }
+
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void update_linkspeed(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ unsigned int bmsr, bmcr, lpa, speed, duplex;
+
+ pdev = ether->pdev;
+
+ if (!mii_link_ok(ðer->mii)) {
+ ether->linkflag = 0x0;
+ netif_carrier_off(dev);
+ dev_warn(&pdev->dev, "%s: Link down.\n", dev->name);
+ return;
+ }
+
+ if (ether->linkflag == 1)
+ return;
+
+ bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR);
+ bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR);
+
+ if (bmcr & BMCR_ANENABLE) {
+ if (!(bmsr & BMSR_ANEGCOMPLETE))
+ return;
+
+ lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA);
+
+ if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF))
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL))
+ duplex = DUPLEX_FULL;
+ else
+ duplex = DUPLEX_HALF;
+
+ } else {
+ speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
+ duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ }
+
+ update_linkspeed_register(dev, speed, duplex);
+
+ dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed,
+ (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
+ ether->linkflag = 0x01;
+
+ netif_carrier_on(dev);
+}
+
+static void w90p910_check_link(unsigned long dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ update_linkspeed(dev);
+ mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000));
+}
+
+static void w90p910_write_cam(struct net_device *dev,
+ unsigned int x, unsigned char *pval)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int msw, lsw;
+
+ msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
+
+ lsw = (pval[4] << 24) | (pval[5] << 16);
+
+ __raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE);
+ __raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE);
+}
+
+static void w90p910_init_desc(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_txbd *tdesc, *tdesc_phys;
+ struct w90p910_rxbd *rdesc, *rdesc_phys;
+ unsigned int i, j;
+
+ ether = netdev_priv(dev);
+
+ ether->tdesc = (struct tran_pdesc *)
+ dma_alloc_coherent(NULL, sizeof(struct tran_pdesc),
+ (dma_addr_t *) ðer->tdesc_phys, GFP_KERNEL);
+
+ ether->rdesc = (struct recv_pdesc *)
+ dma_alloc_coherent(NULL, sizeof(struct recv_pdesc),
+ (dma_addr_t *) ðer->rdesc_phys, GFP_KERNEL);
+
+ for (i = 0; i < TX_DESC_SIZE; i++) {
+ tdesc = &(ether->tdesc->desclist[i]);
+
+ j = ((i + 1) / TX_DESC_SIZE);
+
+ if (j != 0) {
+ tdesc_phys = &(ether->tdesc_phys->desclist[0]);
+ ether->start_tx_ptr = (unsigned int)tdesc_phys;
+ tdesc->next = (unsigned int)ether->start_tx_ptr;
+ } else {
+ tdesc_phys = &(ether->tdesc_phys->desclist[i+1]);
+ tdesc->next = (unsigned int)tdesc_phys;
+ }
+
+ tdesc->buffer = (unsigned int)ether->tdesc_phys->tran_buf[i];
+ tdesc->sl = 0;
+ tdesc->mode = 0;
+ }
+
+ for (i = 0; i < RX_DESC_SIZE; i++) {
+ rdesc = &(ether->rdesc->desclist[i]);
+
+ j = ((i + 1) / RX_DESC_SIZE);
+
+ if (j != 0) {
+ rdesc_phys = &(ether->rdesc_phys->desclist[0]);
+ ether->start_rx_ptr = (unsigned int)rdesc_phys;
+ rdesc->next = (unsigned int)ether->start_rx_ptr;
+ } else {
+ rdesc_phys = &(ether->rdesc_phys->desclist[i+1]);
+ rdesc->next = (unsigned int)rdesc_phys;
+ }
+
+ rdesc->sl = RX_OWEN_DMA;
+ rdesc->buffer = (unsigned int)ether->rdesc_phys->recv_buf[i];
+ }
+}
+
+static void w90p910_set_fifo_threshold(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = TXTHD | BLENGTH;
+ __raw_writel(val, ether->reg + REG_FFTCR);
+}
+
+static void w90p910_return_default_idle(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+ val |= SWR;
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_trigger_rx(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ __raw_writel(ENSTART, ether->reg + REG_RSDR);
+}
+
+static void w90p910_trigger_tx(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ __raw_writel(ENSTART, ether->reg + REG_TSDR);
+}
+
+static void w90p910_enable_mac_interrupt(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP;
+ val |= ENTXBERR | ENRXBERR | ENTXABT;
+
+ __raw_writel(val, ether->reg + REG_MIEN);
+}
+
+static void w90p910_get_and_clear_int(struct net_device *dev,
+ unsigned int *val)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ *val = __raw_readl(ether->reg + REG_MISTA);
+ __raw_writel(*val, ether->reg + REG_MISTA);
+}
+
+static void w90p910_set_global_maccmd(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+ val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC;
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_cam(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+ val = __raw_readl(ether->reg + REG_CAMEN);
+ val |= CAM0EN;
+ __raw_writel(val, ether->reg + REG_CAMEN);
+}
+
+static void w90p910_enable_cam_command(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP;
+ __raw_writel(val, ether->reg + REG_CAMCMR);
+}
+
+static void w90p910_enable_tx(struct net_device *dev, unsigned int enable)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+
+ if (enable)
+ val |= MCMDR_TXON;
+ else
+ val &= ~MCMDR_TXON;
+
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_rx(struct net_device *dev, unsigned int enable)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ unsigned int val;
+
+ val = __raw_readl(ether->reg + REG_MCMDR);
+
+ if (enable)
+ val |= MCMDR_RXON;
+ else
+ val &= ~MCMDR_RXON;
+
+ __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_set_curdest(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ __raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA);
+ __raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA);
+}
+
+static void w90p910_reset_mac(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ spin_lock(ðer->lock);
+
+ w90p910_enable_tx(dev, 0);
+ w90p910_enable_rx(dev, 0);
+ w90p910_set_fifo_threshold(dev);
+ w90p910_return_default_idle(dev);
+
+ if (!netif_queue_stopped(dev))
+ netif_stop_queue(dev);
+
+ w90p910_init_desc(dev);
+
+ dev->trans_start = jiffies;
+ ether->cur_tx = 0x0;
+ ether->finish_tx = 0x0;
+ ether->cur_rx = 0x0;
+
+ w90p910_set_curdest(dev);
+ w90p910_enable_cam(dev);
+ w90p910_enable_cam_command(dev);
+ w90p910_enable_mac_interrupt(dev);
+ w90p910_enable_tx(dev, 1);
+ w90p910_enable_rx(dev, 1);
+ w90p910_trigger_tx(dev);
+ w90p910_trigger_rx(dev);
+
+ dev->trans_start = jiffies;
+
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+
+ spin_unlock(ðer->lock);
+}
+
+static void w90p910_mdio_write(struct net_device *dev,
+ int phy_id, int reg, int data)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ unsigned int val, i;
+
+ pdev = ether->pdev;
+
+ __raw_writel(data, ether->reg + REG_MIID);
+
+ val = (phy_id << 0x08) | reg;
+ val |= PHYBUSY | PHYWR | MDCCR_VAL;
+ __raw_writel(val, ether->reg + REG_MIIDA);
+
+ for (i = 0; i < DELAY; i++) {
+ if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+ break;
+ }
+
+ if (i == DELAY)
+ dev_warn(&pdev->dev, "mdio write timed out\n");
+}
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ unsigned int val, i, data;
+
+ pdev = ether->pdev;
+
+ val = (phy_id << 0x08) | reg;
+ val |= PHYBUSY | MDCCR_VAL;
+ __raw_writel(val, ether->reg + REG_MIIDA);
+
+ for (i = 0; i < DELAY; i++) {
+ if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+ break;
+ }
+
+ if (i == DELAY) {
+ dev_warn(&pdev->dev, "mdio read timed out\n");
+ data = 0xffff;
+ } else {
+ data = __raw_readl(ether->reg + REG_MIID);
+ }
+
+ return data;
+}
+
+static int set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (!is_valid_ether_addr(address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+ w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+ return 0;
+}
+
+static int w90p910_ether_close(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ dma_free_writecombine(NULL, sizeof(struct w90p910_rxbd),
+ ether->rdesc, (dma_addr_t)ether->rdesc_phys);
+ dma_free_writecombine(NULL, sizeof(struct w90p910_txbd),
+ ether->tdesc, (dma_addr_t)ether->tdesc_phys);
+
+ netif_stop_queue(dev);
+
+ del_timer_sync(ðer->check_timer);
+ clk_disable(ether->rmiiclk);
+ clk_disable(ether->clk);
+
+ free_irq(ether->txirq, dev);
+ free_irq(ether->rxirq, dev);
+
+ return 0;
+}
+
+static struct net_device_stats *w90p910_ether_stats(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+
+ ether = netdev_priv(dev);
+
+ return ðer->stats;
+}
+
+static int w90p910_send_frame(struct net_device *dev,
+ unsigned char *data, int length)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_txbd *txbd;
+ struct platform_device *pdev;
+ unsigned char *buffer;
+
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ txbd = ðer->tdesc->desclist[ether->cur_tx];
+ buffer = ether->tdesc->tran_buf[ether->cur_tx];
+ if (length > 1514) {
+ dev_err(&pdev->dev, "send data %d bytes, check it\n", length);
+ length = 1514;
+ }
+
+ txbd->sl = length & 0xFFFF;
+
+ memcpy(buffer, data, length);
+
+ txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
+
+ w90p910_enable_tx(dev, 1);
+
+ w90p910_trigger_tx(dev);
+
+ ether->cur_tx = (ether->cur_tx+1) % TX_DESC_SIZE;
+ txbd = ðer->tdesc->desclist[ether->cur_tx];
+
+ dev->trans_start = jiffies;
+
+ if (txbd->mode & TX_OWEN_DMA)
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ if (!(w90p910_send_frame(dev, skb->data, skb->len))) {
+ ether->skb = skb;
+ dev_kfree_skb_irq(skb);
+ return 0;
+ }
+ return -1;
+}
+
+static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_txbd *txbd;
+ struct platform_device *pdev;
+ struct tran_pdesc *tran_pdesc;
+ struct net_device *dev;
+ unsigned int cur_entry, entry, status;
+
+ dev = (struct net_device *)dev_id;
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ spin_lock(ðer->lock);
+
+ w90p910_get_and_clear_int(dev, &status);
+
+ cur_entry = __raw_readl(ether->reg + REG_CTXDSA);
+
+ tran_pdesc = ether->tdesc_phys;
+ entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+
+ while (entry != cur_entry) {
+ txbd = ðer->tdesc->desclist[ether->finish_tx];
+
+ ether->finish_tx = (ether->finish_tx + 1) % TX_DESC_SIZE;
+
+ if (txbd->sl & TXDS_TXCP) {
+ ether->stats.tx_packets++;
+ ether->stats.tx_bytes += txbd->sl & 0xFFFF;
+ } else {
+ ether->stats.tx_errors++;
+ }
+
+ txbd->sl = 0x0;
+ txbd->mode = 0x0;
+
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+
+ entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+ }
+
+ if (status & MISTA_EXDEF) {
+ dev_err(&pdev->dev, "emc defer exceed interrupt\n");
+ } else if (status & MISTA_TXBERR) {
+ dev_err(&pdev->dev, "emc bus error interrupt\n");
+ w90p910_reset_mac(dev);
+ } else if (status & MISTA_TDU) {
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+
+ spin_unlock(ðer->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void netdev_rx(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ struct w90p910_rxbd *rxbd;
+ struct platform_device *pdev;
+ struct recv_pdesc *rdesc_phys;
+ struct sk_buff *skb;
+ unsigned char *data;
+ unsigned int length, status, val, entry;
+
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+ rdesc_phys = ether->rdesc_phys;
+
+ rxbd = ðer->rdesc->desclist[ether->cur_rx];
+
+ do {
+ val = __raw_readl(ether->reg + REG_CRXDSA);
+ entry = (unsigned int)&rdesc_phys->desclist[ether->cur_rx];
+
+ if (val == entry)
+ break;
+
+ status = rxbd->sl;
+ length = status & 0xFFFF;
+
+ if (status & RXDS_RXGD) {
+ data = ether->rdesc->recv_buf[ether->cur_rx];
+ skb = dev_alloc_skb(length+2);
+ if (!skb) {
+ dev_err(&pdev->dev, "get skb buffer error\n");
+ ether->stats.rx_dropped++;
+ return;
+ }
+
+ skb->dev = dev;
+ skb_reserve(skb, 2);
+ skb_put(skb, length);
+ skb_copy_to_linear_data(skb, data, length);
+ skb->protocol = eth_type_trans(skb, dev);
+ ether->stats.rx_packets++;
+ ether->stats.rx_bytes += length;
+ netif_rx(skb);
+ } else {
+ ether->stats.rx_errors++;
+
+ if (status & RXDS_RP) {
+ dev_err(&pdev->dev, "rx runt err\n");
+ ether->stats.rx_length_errors++;
+ } else if (status & RXDS_CRCE) {
+ dev_err(&pdev->dev, "rx crc err\n");
+ ether->stats.rx_crc_errors++;
+ }
+
+ if (status & RXDS_ALIE) {
+ dev_err(&pdev->dev, "rx aligment err\n");
+ ether->stats.rx_frame_errors++;
+ } else if (status & RXDS_PTLE) {
+ dev_err(&pdev->dev, "rx longer err\n");
+ ether->stats.rx_over_errors++;
+ }
+ }
+
+ rxbd->sl = RX_OWEN_DMA;
+ rxbd->reserved = 0x0;
+ ether->cur_rx = (ether->cur_rx+1) % RX_DESC_SIZE;
+ rxbd = ðer->rdesc->desclist[ether->cur_rx];
+
+ dev->last_rx = jiffies;
+ } while (1);
+}
+
+static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev;
+ struct w90p910_ether *ether;
+ struct platform_device *pdev;
+ unsigned int status;
+
+ dev = (struct net_device *)dev_id;
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ spin_lock(ðer->lock);
+
+ w90p910_get_and_clear_int(dev, &status);
+
+ if (status & MISTA_RDU) {
+ netdev_rx(dev);
+
+ w90p910_trigger_rx(dev);
+
+ spin_unlock(ðer->lock);
+ return IRQ_HANDLED;
+ } else if (status & MISTA_RXBERR) {
+ dev_err(&pdev->dev, "emc rx bus error\n");
+ w90p910_reset_mac(dev);
+ }
+
+ netdev_rx(dev);
+ spin_unlock(ðer->lock);
+ return IRQ_HANDLED;
+}
+
+static int w90p910_ether_open(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ struct platform_device *pdev;
+
+ ether = netdev_priv(dev);
+ pdev = ether->pdev;
+
+ w90p910_reset_mac(dev);
+ w90p910_set_fifo_threshold(dev);
+ w90p910_set_curdest(dev);
+ w90p910_enable_cam(dev);
+ w90p910_enable_cam_command(dev);
+ w90p910_enable_mac_interrupt(dev);
+ w90p910_set_global_maccmd(dev);
+ w90p910_enable_rx(dev, 1);
+
+ ether->rx_packets = 0x0;
+ ether->rx_bytes = 0x0;
+
+ if (request_irq(ether->txirq, w90p910_tx_interrupt,
+ 0x0, pdev->name, dev)) {
+ dev_err(&pdev->dev, "register irq tx failed\n");
+ return -EAGAIN;
+ }
+
+ if (request_irq(ether->rxirq, w90p910_rx_interrupt,
+ 0x0, pdev->name, dev)) {
+ dev_err(&pdev->dev, "register irq rx failed\n");
+ return -EAGAIN;
+ }
+
+ mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000));
+ netif_start_queue(dev);
+ w90p910_trigger_rx(dev);
+
+ dev_info(&pdev->dev, "%s is OPENED\n", dev->name);
+
+ return 0;
+}
+
+static void w90p910_ether_set_multicast_list(struct net_device *dev)
+{
+ struct w90p910_ether *ether;
+ unsigned int rx_mode;
+
+ ether = netdev_priv(dev);
+
+ if (dev->flags & IFF_PROMISC)
+ rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+ else if ((dev->flags & IFF_ALLMULTI) || dev->mc_list)
+ rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+ else
+ rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
+ __raw_writel(rx_mode, ether->reg + REG_CAMCMR);
+}
+
+static int w90p910_ether_ioctl(struct net_device *dev,
+ struct ifreq *ifr, int cmd)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ return generic_mii_ioctl(ðer->mii, data, cmd, NULL);
+}
+
+static void w90p910_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int w90p910_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_ethtool_gset(ðer->mii, cmd);
+}
+
+static int w90p910_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_ethtool_sset(ðer->mii, cmd);
+}
+
+static int w90p910_nway_reset(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_nway_restart(ðer->mii);
+}
+
+static u32 w90p910_get_link(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ return mii_link_ok(ðer->mii);
+}
+
+static const struct ethtool_ops w90p910_ether_ethtool_ops = {
+ .get_settings = w90p910_get_settings,
+ .set_settings = w90p910_set_settings,
+ .get_drvinfo = w90p910_get_drvinfo,
+ .nway_reset = w90p910_nway_reset,
+ .get_link = w90p910_get_link,
+};
+
+static const struct net_device_ops w90p910_ether_netdev_ops = {
+ .ndo_open = w90p910_ether_open,
+ .ndo_stop = w90p910_ether_close,
+ .ndo_start_xmit = w90p910_ether_start_xmit,
+ .ndo_get_stats = w90p910_ether_stats,
+ .ndo_set_multicast_list = w90p910_ether_set_multicast_list,
+ .ndo_set_mac_address = set_mac_address,
+ .ndo_do_ioctl = w90p910_ether_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+static void __init get_mac_address(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+ struct platform_device *pdev;
+ char addr[6];
+
+ pdev = ether->pdev;
+
+ addr[0] = 0x00;
+ addr[1] = 0x02;
+ addr[2] = 0xac;
+ addr[3] = 0x55;
+ addr[4] = 0x88;
+ addr[5] = 0xa8;
+
+ if (is_valid_ether_addr(addr))
+ memcpy(dev->dev_addr, &addr, 0x06);
+ else
+ dev_err(&pdev->dev, "invalid mac address\n");
+}
+
+static int w90p910_ether_setup(struct net_device *dev)
+{
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ ether_setup(dev);
+ dev->netdev_ops = &w90p910_ether_netdev_ops;
+ dev->ethtool_ops = &w90p910_ether_ethtool_ops;
+
+ dev->tx_queue_len = 16;
+ dev->dma = 0x0;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ get_mac_address(dev);
+
+ spin_lock_init(ðer->lock);
+
+ ether->cur_tx = 0x0;
+ ether->cur_rx = 0x0;
+ ether->finish_tx = 0x0;
+ ether->linkflag = 0x0;
+ ether->mii.phy_id = 0x01;
+ ether->mii.phy_id_mask = 0x1f;
+ ether->mii.reg_num_mask = 0x1f;
+ ether->mii.dev = dev;
+ ether->mii.mdio_read = w90p910_mdio_read;
+ ether->mii.mdio_write = w90p910_mdio_write;
+
+ setup_timer(ðer->check_timer, w90p910_check_link,
+ (unsigned long)dev);
+
+ return 0;
+}
+
+static int __devinit w90p910_ether_probe(struct platform_device *pdev)
+{
+ struct w90p910_ether *ether;
+ struct net_device *dev;
+ struct resource *res;
+ int error;
+
+ dev = alloc_etherdev(sizeof(struct w90p910_ether));
+ if (!dev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ error = -ENXIO;
+ goto failed_free;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto failed_free;
+ }
+
+ ether = netdev_priv(dev);
+
+ ether->reg = ioremap(res->start, resource_size(res));
+ if (ether->reg == NULL) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto failed_free_mem;
+ }
+
+ ether->txirq = platform_get_irq(pdev, 0);
+ if (ether->txirq < 0) {
+ dev_err(&pdev->dev, "failed to get ether tx irq\n");
+ error = -ENXIO;
+ goto failed_free_io;
+ }
+
+ ether->rxirq = platform_get_irq(pdev, 1);
+ if (ether->rxirq < 0) {
+ dev_err(&pdev->dev, "failed to get ether rx irq\n");
+ error = -ENXIO;
+ goto failed_free_txirq;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ ether->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ether->clk)) {
+ dev_err(&pdev->dev, "failed to get ether clock\n");
+ error = PTR_ERR(ether->clk);
+ goto failed_free_rxirq;
+ }
+
+ ether->rmiiclk = clk_get(&pdev->dev, "RMII");
+ if (IS_ERR(ether->rmiiclk)) {
+ dev_err(&pdev->dev, "failed to get ether clock\n");
+ error = PTR_ERR(ether->rmiiclk);
+ goto failed_put_clk;
+ }
+
+ ether->pdev = pdev;
+
+ w90p910_ether_setup(dev);
+
+ error = register_netdev(dev);
+ if (error != 0) {
+ dev_err(&pdev->dev, "Regiter EMC w90p910 FAILED\n");
+ error = -ENODEV;
+ goto failed_put_rmiiclk;
+ }
+
+ return 0;
+failed_put_rmiiclk:
+ clk_put(ether->rmiiclk);
+failed_put_clk:
+ clk_put(ether->clk);
+failed_free_rxirq:
+ free_irq(ether->rxirq, pdev);
+ platform_set_drvdata(pdev, NULL);
+failed_free_txirq:
+ free_irq(ether->txirq, pdev);
+failed_free_io:
+ iounmap(ether->reg);
+failed_free_mem:
+ release_mem_region(res->start, resource_size(res));
+failed_free:
+ free_netdev(dev);
+ return error;
+}
+
+static int __devexit w90p910_ether_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct w90p910_ether *ether = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ clk_put(ether->rmiiclk);
+ clk_put(ether->clk);
+ del_timer_sync(ðer->check_timer);
+ platform_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver w90p910_ether_driver = {
+ .probe = w90p910_ether_probe,
+ .remove = __devexit_p(w90p910_ether_remove),
+ .driver = {
+ .name = "w90p910-emc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init w90p910_ether_init(void)
+{
+ return platform_driver_register(&w90p910_ether_driver);
+}
+
+static void __exit w90p910_ether_exit(void)
+{
+ platform_driver_unregister(&w90p910_ether_driver);
+}
+
+module_init(w90p910_ether_init);
+module_exit(w90p910_ether_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 MAC driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-emc");
+
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 18b566a..cf30e27 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -318,7 +318,7 @@
pos3 = mca_read_stored_pos( slot, 3 );
pos4 = mca_read_stored_pos( slot, 4 );
- for (l_i = 0; l_i < 0x09; l_i++)
+ for (l_i = 0; l_i < 8; l_i++)
if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
break;
ioaddr = at1700_mca_probe_list[l_i];
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index e1658ef..2a1120a 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -188,14 +188,14 @@
#define RRS_HDS_TYPE_DATA 2
#define RRS_IS_NO_HDS_TYPE(flag) \
- (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+ ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == 0)
#define RRS_IS_HDS_HEAD(flag) \
- (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+ ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
RRS_HDS_TYPE_HEAD)
#define RRS_IS_HDS_DATA(flag) \
- (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+ ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
RRS_HDS_TYPE_DATA)
/* rrs word 3 bit 0:31 */
@@ -245,7 +245,7 @@
#define RRS_PACKET_TYPE_802_3 1
#define RRS_PACKET_TYPE_ETH 0
#define RRS_PACKET_IS_ETH(word) \
- (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+ ((((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK) == \
RRS_PACKET_TYPE_ETH)
#define RRS_RXD_IS_VALID(word) \
((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index e4afbd6..607007d 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -281,6 +281,8 @@
if (wol->wolopts & WAKE_PHY)
adapter->wol |= AT_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index cd547a2..a383122 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1689,7 +1689,7 @@
if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
RRS_RX_RFD_CNT_MASK;
- if (unlikely(rfd_num) != 1)
+ if (unlikely(rfd_num != 1))
/* TODO support mul rfd*/
if (netif_msg_rx_err(adapter))
dev_warn(&pdev->dev,
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 619c658..4003955 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -365,6 +365,8 @@
if (wol->wolopts & WAKE_PHY)
adapter->wol |= AT_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index c734b19..204db96 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -2071,7 +2071,7 @@
if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
- if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST))
+ if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
return -EOPNOTSUPP;
/* these settings will always override what we currently have */
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index f703758..5b4bf3d 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -73,7 +73,7 @@
#define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST)
#define BE_MAX_LRO_DESCRIPTORS 16
-#define BE_MAX_FRAGS_PER_FRAME 16
+#define BE_MAX_FRAGS_PER_FRAME (min((u32) 16, (u32) MAX_SKB_FRAGS))
struct be_dma_mem {
void *va;
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 9592f22..cccc541 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -162,8 +162,8 @@
return -EINVAL;
adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
- if (adapter->max_rx_coal > MAX_SKB_FRAGS)
- adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+ if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME)
+ adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
/* if AIC is being turned on now, start with an EQD of 0 */
if (rx_eq->enable_aic == 0 &&
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b02e805..29c33c7 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -55,6 +55,10 @@
#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK 0x7 /* bits 26 - 28 */
#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT 26
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 0xC18
+#define CEV_ISR_SIZE 4
+
/********* Event Q door bell *************/
#define DB_EQ_OFFSET DB_CQ_OFFSET
#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 66c10c8..dea3155 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -666,8 +666,8 @@
{
struct be_queue_info *rxq = &adapter->rx_obj.q;
struct be_rx_page_info *page_info;
- u16 rxq_idx, i, num_rcvd;
- u32 pktsize, hdr_len, curr_frag_len;
+ u16 rxq_idx, i, num_rcvd, j;
+ u32 pktsize, hdr_len, curr_frag_len, size;
u8 *start;
rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
@@ -708,23 +708,34 @@
}
/* More frags present for this completion */
- pktsize -= curr_frag_len; /* account for above copied frag */
- for (i = 1; i < num_rcvd; i++) {
+ size = pktsize;
+ for (i = 1, j = 0; i < num_rcvd; i++) {
+ size -= curr_frag_len;
index_inc(&rxq_idx, rxq->len);
page_info = get_rx_page_info(adapter, rxq_idx);
- curr_frag_len = min(pktsize, rx_frag_size);
+ curr_frag_len = min(size, rx_frag_size);
- skb_shinfo(skb)->frags[i].page = page_info->page;
- skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
- skb_shinfo(skb)->frags[i].size = curr_frag_len;
+ /* Coalesce all frags from the same physical page in one slot */
+ if (page_info->page_offset == 0) {
+ /* Fresh page */
+ j++;
+ skb_shinfo(skb)->frags[j].page = page_info->page;
+ skb_shinfo(skb)->frags[j].page_offset =
+ page_info->page_offset;
+ skb_shinfo(skb)->frags[j].size = 0;
+ skb_shinfo(skb)->nr_frags++;
+ } else {
+ put_page(page_info->page);
+ }
+
+ skb_shinfo(skb)->frags[j].size += curr_frag_len;
skb->len += curr_frag_len;
skb->data_len += curr_frag_len;
- skb_shinfo(skb)->nr_frags++;
- pktsize -= curr_frag_len;
memset(page_info, 0, sizeof(*page_info));
}
+ BUG_ON(j > MAX_SKB_FRAGS);
done:
be_rx_stats_update(adapter, pktsize, num_rcvd);
@@ -786,7 +797,7 @@
struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
struct be_queue_info *rxq = &adapter->rx_obj.q;
u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
- u16 i, rxq_idx = 0, vid;
+ u16 i, rxq_idx = 0, vid, j;
num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
@@ -794,20 +805,28 @@
rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
remaining = pkt_size;
- for (i = 0; i < num_rcvd; i++) {
+ for (i = 0, j = -1; i < num_rcvd; i++) {
page_info = get_rx_page_info(adapter, rxq_idx);
curr_frag_len = min(remaining, rx_frag_size);
- rx_frags[i].page = page_info->page;
- rx_frags[i].page_offset = page_info->page_offset;
- rx_frags[i].size = curr_frag_len;
+ /* Coalesce all frags from the same physical page in one slot */
+ if (i == 0 || page_info->page_offset == 0) {
+ /* First frag or Fresh page */
+ j++;
+ rx_frags[j].page = page_info->page;
+ rx_frags[j].page_offset = page_info->page_offset;
+ rx_frags[j].size = 0;
+ } else {
+ put_page(page_info->page);
+ }
+ rx_frags[j].size += curr_frag_len;
+
remaining -= curr_frag_len;
-
index_inc(&rxq_idx, rxq->len);
-
memset(page_info, 0, sizeof(*page_info));
}
+ BUG_ON(j > MAX_SKB_FRAGS);
if (likely(!vlanf)) {
lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
@@ -1255,15 +1274,17 @@
{
struct be_adapter *adapter = dev;
struct be_ctrl_info *ctrl = &adapter->ctrl;
- int rx, tx;
+ int isr;
- tx = event_handle(ctrl, &adapter->tx_eq);
- rx = event_handle(ctrl, &adapter->rx_eq);
+ isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+ ctrl->pci_func * CEV_ISR_SIZE);
+ if (!isr)
+ return IRQ_NONE;
- if (rx || tx)
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
+ event_handle(ctrl, &adapter->tx_eq);
+ event_handle(ctrl, &adapter->rx_eq);
+
+ return IRQ_HANDLED;
}
static irqreturn_t be_msix_rx(int irq, void *dev)
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 9578a3d..206144f 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -428,10 +428,11 @@
printk(KERN_DEBUG "phy registers:");
for (addr = 0; addr < 32; ++addr) {
if ((addr & 7) == 0)
- printk("\n" KERN_DEBUG);
- printk(" %.4x", bmac_mif_read(dev, addr));
+ printk(KERN_DEBUG);
+ printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr));
}
- printk("\n");
+ printk(KERN_CONT "\n");
+
if (bp->is_bmac_plus) {
unsigned int capable, ctrl;
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8678457..85a737c 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -902,6 +902,8 @@
u16 rx_quick_cons_trip;
u16 rx_ticks_int;
u16 rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT (0xf0*12)
u32 lin_cnt;
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ed648ac..2ee581a 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -4212,13 +4212,14 @@
u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
u8 *version, u16 len)
{
- struct bnx2x *bp = params->bp;
+ struct bnx2x *bp;
u32 ext_phy_type = 0;
u32 spirom_ver = 0;
u8 status = 0 ;
if (version == NULL || params == NULL)
return -EINVAL;
+ bp = params->bp;
spirom_ver = REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region,
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index fbf1352..c36a5f3 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -484,8 +484,9 @@
mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
mark = ((mark + 0x3) & ~0x3);
- printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark);
+ printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+ printk(KERN_ERR PFX);
for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
@@ -500,7 +501,7 @@
data[8] = 0x0;
printk(KERN_CONT "%s", (char *)data);
}
- printk("\n" KERN_ERR PFX "end of fw dump\n");
+ printk(KERN_ERR PFX "end of fw dump\n");
}
static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -4434,7 +4435,7 @@
REG_WR16(bp, BAR_USTRORM_INTMEM +
USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
U_SB_ETH_RX_CQ_INDEX),
- bp->rx_ticks ? 0 : 1);
+ (bp->rx_ticks/12) ? 0 : 1);
/* HC_INDEX_C_ETH_TX_CQ_CONS */
REG_WR8(bp, BAR_CSTRORM_INTMEM +
@@ -4444,7 +4445,7 @@
REG_WR16(bp, BAR_CSTRORM_INTMEM +
CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
C_SB_ETH_TX_CQ_INDEX),
- bp->tx_ticks ? 0 : 1);
+ (bp->tx_ticks/12) ? 0 : 1);
}
}
@@ -7354,7 +7355,7 @@
#ifdef BNX2X_STOP_ON_ERROR
BNX2X_ERR("reset task called but STOP_ON_ERROR defined"
" so reset not done to allow debug dump,\n"
- KERN_ERR " you will need to reboot when done\n");
+ " you will need to reboot when done\n");
return;
#endif
@@ -8637,6 +8638,14 @@
return 0;
}
+static u32
+bnx2x_get_link(struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ return bp->link_vars.link_up;
+}
+
static int bnx2x_get_eeprom_len(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -9061,12 +9070,12 @@
struct bnx2x *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
- if (bp->rx_ticks > 3000)
- bp->rx_ticks = 3000;
+ if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
- if (bp->tx_ticks > 0x3000)
- bp->tx_ticks = 0x3000;
+ if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
if (netif_running(dev))
bnx2x_update_coalesce(bp);
@@ -10034,7 +10043,7 @@
.get_msglevel = bnx2x_get_msglevel,
.set_msglevel = bnx2x_set_msglevel,
.nway_reset = bnx2x_nway_reset,
- .get_link = ethtool_op_get_link,
+ .get_link = bnx2x_get_link,
.get_eeprom_len = bnx2x_get_eeprom_len,
.get_eeprom = bnx2x_get_eeprom,
.set_eeprom = bnx2x_set_eeprom,
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d927f71..aa1be1f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1459,8 +1459,16 @@
* ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
*/
if (bond->slave_cnt == 0) {
- if (slave_dev->type != ARPHRD_ETHER)
- bond_setup_by_slave(bond_dev, slave_dev);
+ if (bond_dev->type != slave_dev->type) {
+ dev_close(bond_dev);
+ pr_debug("%s: change device type from %d to %d\n",
+ bond_dev->name, bond_dev->type, slave_dev->type);
+ if (slave_dev->type != ARPHRD_ETHER)
+ bond_setup_by_slave(bond_dev, slave_dev);
+ else
+ ether_setup(bond_dev);
+ dev_open(bond_dev);
+ }
} else if (bond_dev->type != slave_dev->type) {
pr_err(DRV_NAME ": %s ether type (%d) is different "
"from other slaves (%d), can not enslave it.\n",
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 574dadd..9e4283a 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -346,7 +346,7 @@
skb = dev_alloc_skb(sizeof(struct can_frame));
if (skb == NULL) {
err = -ENOMEM;
- goto out;
+ goto restart;
}
skb->dev = dev;
skb->protocol = htons(ETH_P_CAN);
@@ -361,13 +361,13 @@
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+restart:
dev_dbg(dev->dev.parent, "restarted\n");
priv->can_stats.restarts++;
/* Now restart the device */
err = priv->do_set_mode(dev, CAN_MODE_START);
-out:
netif_carrier_on(dev);
if (err)
dev_err(dev->dev.parent, "Error %d during restart", err);
@@ -473,6 +473,10 @@
return -EINVAL;
}
+ /* Switch carrier on if device was stopped while in bus-off state */
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+
setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
return 0;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 571f133..08ebee7 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -63,7 +63,6 @@
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
-#include <linux/can/dev.h>
#include "sja1000.h"
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 4d1515f..4869d77 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -227,7 +227,7 @@
}
rcu_read_lock();
- ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+ ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
if (ulp_ops)
ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
rcu_read_unlock();
@@ -319,6 +319,20 @@
return 0;
}
+static void cnic_uio_stop(void)
+{
+ struct cnic_dev *dev;
+
+ read_lock(&cnic_dev_lock);
+ list_for_each_entry(dev, &cnic_dev_list, list) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (cp->cnic_uinfo)
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+ }
+ read_unlock(&cnic_dev_lock);
+}
+
int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
{
struct cnic_dev *dev;
@@ -390,6 +404,9 @@
}
read_unlock(&cnic_dev_lock);
+ if (ulp_type == CNIC_ULP_ISCSI)
+ cnic_uio_stop();
+
rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
mutex_unlock(&cnic_lock);
@@ -632,7 +649,6 @@
int i = 0;
if (cp->cnic_uinfo) {
- cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
while (cp->uio_dev != -1 && i < 15) {
msleep(100);
i++;
@@ -1057,6 +1073,9 @@
struct cnic_local *cp = dev->cnic_priv;
int if_type;
+ if (cp->cnic_uinfo)
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
rcu_read_lock();
for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
struct cnic_ulp_ops *ulp_ops;
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 58afafb..fd5e32c 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1097,7 +1097,7 @@
.ndo_start_xmit = cpmac_start_xmit,
.ndo_tx_timeout = cpmac_tx_timeout,
.ndo_set_multicast_list = cpmac_set_multicast_list,
- .ndo_so_ioctl = cpmac_ioctl,
+ .ndo_do_ioctl = cpmac_ioctl,
.ndo_set_config = cpmac_config,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 3eee666..55445f9 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1524,6 +1524,7 @@
static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
if (net_debug > 3) {
printk("%s: sent %d byte packet of type %x\n",
@@ -1535,7 +1536,7 @@
ask the chip to start transmitting before the
whole packet has been completely uploaded. */
- spin_lock_irq(&lp->lock);
+ spin_lock_irqsave(&lp->lock, flags);
netif_stop_queue(dev);
/* initiate a transmit sequence */
@@ -1549,13 +1550,13 @@
* we're waiting for TxOk, so return 1 and requeue this packet.
*/
- spin_unlock_irq(&lp->lock);
+ spin_unlock_irqrestore(&lp->lock, flags);
if (net_debug) printk("cs89x0: Tx buffer not free!\n");
return NETDEV_TX_BUSY;
}
/* Write the contents of the packet */
writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
- spin_unlock_irq(&lp->lock);
+ spin_unlock_irqrestore(&lp->lock, flags);
lp->stats.tx_bytes += skb->len;
dev->trans_start = jiffies;
dev_kfree_skb (skb);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 538dda4..fb5df5c 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -642,8 +642,7 @@
struct port_info *pi = netdev_priv(dev);
pi->qs = &adap->sge.qs[pi->first_qset];
- for (j = pi->first_qset; j < pi->first_qset + pi->nqsets;
- ++j, ++qset_idx) {
+ for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
err = t3_sge_alloc_qset(adap, qset_idx, 1,
(adap->flags & USING_MSIX) ? qset_idx + 1 :
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 2df8fb0a..12fd446 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -1820,11 +1820,19 @@
struct device *emac_dev = &priv->ndev->dev;
struct sockaddr *sa = addr;
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EINVAL;
+
/* Store mac addr in priv and rx channel and set it in EMAC hw */
memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
- memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
- emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+
+ /* If the interface is down - rxch is NULL. */
+ /* MAC address is configured only after the interface is enabled. */
+ if (netif_running(ndev)) {
+ memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len);
+ emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr);
+ }
if (netif_msg_drv(priv))
dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 895d721..4b6a219 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -268,8 +268,9 @@
printk(KERN_INFO "tx_coalesce:\t%d packets\n",
tx_coalesce);
if (np->coalesce)
- printk(KERN_INFO "rx_coalesce:\t%d packets\n"
- KERN_INFO "rx_timeout: \t%d ns\n",
+ printk(KERN_INFO
+ "rx_coalesce:\t%d packets\n"
+ "rx_timeout: \t%d ns\n",
np->rx_coalesce, np->rx_timeout*640);
if (np->vlan)
printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
@@ -1522,9 +1523,9 @@
printk (KERN_INFO "Operating at 10 Mbps, ");
}
if (bmcr & MII_BMCR_DUPLEX_MODE) {
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
}
if (np->tx_flow)
@@ -1614,9 +1615,9 @@
}
if (np->full_duplex) {
bmcr |= MII_BMCR_DUPLEX_MODE;
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
#if 0
/* Set 1000BaseT Master/Slave setting */
@@ -1669,9 +1670,9 @@
__u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
printk (KERN_INFO "Operating at 1000 Mbps, ");
if (bmcr & MII_BMCR_DUPLEX_MODE) {
- printk ("Full duplex\n");
+ printk (KERN_CONT "Full duplex\n");
} else {
- printk ("Half duplex\n");
+ printk (KERN_CONT "Half duplex\n");
}
}
if (np->tx_flow)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index efa680f..41b648a 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1897,6 +1897,9 @@
if (ioread8(&nic->csr->scb.status) & rus_no_res)
nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
return -ENODATA;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5e3356f..5b8cbdb 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2185,12 +2185,16 @@
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->skb) {
+ if (buffer_info->dma) {
pci_unmap_single(pdev,
buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ }
+ buffer_info->dma = 0;
+
+ if (buffer_info->skb) {
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
}
@@ -4033,6 +4037,7 @@
buffer_info->dma,
buffer_info->length,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
length = le16_to_cpu(rx_desc->length);
/* !EOP means multiple descriptors were used to store a single
@@ -4222,6 +4227,7 @@
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
break; /* while !buffer_info->skb */
}
@@ -4817,6 +4823,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
e1000_down(adapter);
pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 8890c97..c0f185b 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -238,6 +238,7 @@
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -575,6 +576,8 @@
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
+
/* NVM Control */
#define E1000_EECD_SK 0x00000001 /* NVM Clock */
#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 163c1c0..fd44d9f 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -215,6 +215,7 @@
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
+ E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
E1000_HICR = 0x08F00, /* Host Interface Control */
};
@@ -302,6 +303,9 @@
#define E1000_KMRNCTRLSTA_REN 0x00200000
#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E
+#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400
#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e23f50f..d56c747 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,6 +338,7 @@
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ union ich8_hws_flash_status hsfsts;
u32 gfpreg;
u32 sector_base_addr;
u32 sector_end_addr;
@@ -374,6 +375,20 @@
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
+ /*
+ * Make sure the flash bank size does not overwrite the 4k
+ * sector ranges. We may have 64k allotted to us but we only care
+ * about the first 2 4k sectors. Therefore, if we have anything less
+ * than 64k set in the HSFSTS register, we will reduce the bank size
+ * down to 4k and let the rest remain unused. If berasesz == 3, then
+ * we are working in 64k mode. Otherwise we are not.
+ */
+ if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.berasesz != 3)
+ nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
+ }
+
nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
/* Clear shadow ram */
@@ -446,6 +461,95 @@
return 0;
}
+/**
+ * e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ E1000_KMRNCTRLSTA_K1_ENABLE);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = e1000_link_stall_workaround_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ e1000e_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ e1000e_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -694,6 +798,38 @@
}
/**
+ * e1000_lan_init_done_ich8lan - Check for PHY config completion
+ * @hw: pointer to the HW structure
+ *
+ * Check the appropriate indication the MAC has finished configuring the
+ * PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+ u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+ /* Wait for basic configuration completes before proceeding */
+ do {
+ data = er32(STATUS);
+ data &= E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ } while ((!data) && --loop);
+
+ /*
+ * If basic configuration is incomplete before the above loop
+ * count reaches 0, loading the configuration from NVM will
+ * leave the PHY in a bad state possibly resulting in no link.
+ */
+ if (loop == 0)
+ hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+
+ /* Clear the Init Done bit for the next init event */
+ data = er32(STATUS);
+ data &= ~E1000_STATUS_LAN_INIT_DONE;
+ ew32(STATUS, data);
+}
+
+/**
* e1000_phy_hw_reset_ich8lan - Performs a PHY reset
* @hw: pointer to the HW structure
*
@@ -707,13 +843,15 @@
u32 i;
u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val;
- u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
return ret_val;
+ /* Allow time for h/w to get to a quiescent state after reset */
+ mdelay(10);
+
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
@@ -741,26 +879,8 @@
if (!(data & sw_cfg_mask))
return 0;
- /* Wait for basic configuration completes before proceeding*/
- do {
- data = er32(STATUS);
- data &= E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
- } while ((!data) && --loop);
-
- /*
- * If basic configuration is incomplete before the above loop
- * count reaches 0, loading the configuration from NVM will
- * leave the PHY in a bad state possibly resulting in no link.
- */
- if (loop == 0) {
- hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
- }
-
- /* Clear the Init Done bit for the next init event */
- data = er32(STATUS);
- data &= ~E1000_STATUS_LAN_INIT_DONE;
- ew32(STATUS, data);
+ /* Wait for basic configuration completes before proceeding */
+ e1000_lan_init_done_ich8lan(hw);
/*
* Make sure HW does not configure LCD from PHY
@@ -961,12 +1081,14 @@
phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* Call gig speed drop workaround on LPLU before accessing
* any PHY registers
*/
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3))
+ if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
@@ -979,6 +1101,9 @@
phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
@@ -1038,6 +1163,10 @@
if (!active) {
phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
@@ -1073,12 +1202,14 @@
phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* Call gig speed drop workaround on LPLU before accessing
* any PHY registers
*/
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3))
+ if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
@@ -1905,7 +2036,7 @@
break;
case 1:
sector_size = ICH_FLASH_SEG_SIZE_4K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
+ iteration = 1;
break;
case 2:
if (hw->mac.type == e1000_ich9lan) {
@@ -1917,7 +2048,7 @@
break;
case 3:
sector_size = ICH_FLASH_SEG_SIZE_64K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
+ iteration = 1;
break;
default:
return -E1000_ERR_NVM;
@@ -2143,6 +2274,12 @@
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
+ /* Clear PHY Reset Asserted bit */
+ if (hw->mac.type >= e1000_pchlan) {
+ u32 status = er32(STATUS);
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ }
+
/*
* PHY HW reset requires MAC CORE reset at the same
* time to make sure the interface between MAC and the
@@ -2156,22 +2293,33 @@
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- if (!ret_val) {
- /* release the swflag because it is not reset by
- * hardware reset
- */
+ if (!ret_val)
e1000_release_swflag_ich8lan(hw);
+
+ if (ctrl & E1000_CTRL_PHY_RST)
+ ret_val = hw->phy.ops.get_cfg_done(hw);
+
+ if (hw->mac.type >= e1000_ich10lan) {
+ e1000_lan_init_done_ich8lan(hw);
+ } else {
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg(hw, "Auto Read Done did not complete\n");
+ }
}
- ret_val = e1000e_get_auto_rd_done(hw);
- if (ret_val) {
- /*
- * When auto config read does not complete, do not
- * return with an error. This can happen in situations
- * where there is no eeprom and prevents getting link.
- */
- hw_dbg(hw, "Auto Read Done did not complete\n");
- }
+ /*
+ * For PCH, this write will make sure that any noise
+ * will be detected as a CRC error and be dropped rather than show up
+ * as a bad packet to the DMA engine.
+ */
+ if (hw->mac.type == e1000_pchlan)
+ ew32(CRC_OFFSET, 0x65656565);
ew32(IMC, 0xffffffff);
icr = er32(ICR);
@@ -2222,6 +2370,18 @@
for (i = 0; i < mac->mta_reg_count; i++)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+ /*
+ * The 82578 Rx buffer will stall if wakeup is enabled in host and
+ * the ME. Reading the BM_WUC register will clear the host wakeup bit.
+ * Reset the phy after disabling host wakeup to reset the Rx buffer.
+ */
+ if (hw->phy.type == e1000_phy_82578) {
+ hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+ ret_val = e1000_phy_hw_reset_ich8lan(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Setup link and flow control */
ret_val = e1000_setup_link_ich8lan(hw);
@@ -2254,16 +2414,6 @@
ew32(CTRL_EXT, ctrl_ext);
/*
- * The 82578 Rx buffer will stall if wakeup is enabled in host and
- * the ME. Reading the BM_WUC register will clear the host wakeup bit.
- * Reset the phy after disabling host wakeup to reset the Rx buffer.
- */
- if (hw->phy.type == e1000_phy_82578) {
- e1e_rphy(hw, BM_WUC, &i);
- e1000e_phy_hw_reset_generic(hw);
- }
-
- /*
* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
@@ -2485,6 +2635,14 @@
if (ret_val)
return ret_val;
+ if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ E1000_KMRNCTRLSTA_K1_DISABLE);
+ if (ret_val)
+ return ret_val;
+ }
+
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3) &&
(*speed == SPEED_1000)) {
@@ -2850,6 +3008,16 @@
{
u32 bank = 0;
+ if (hw->mac.type >= e1000_pchlan) {
+ u32 status = er32(STATUS);
+
+ if (status & E1000_STATUS_PHYRA)
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ else
+ hw_dbg(hw,
+ "PHY Reset Asserted not set - needs delay\n");
+ }
+
e1000e_get_cfg_done(hw);
/* If EEPROM is not marked present, init the IGP 3 PHY manually */
@@ -2921,7 +3089,7 @@
static struct e1000_mac_operations ich8_mac_ops = {
.id_led_init = e1000e_id_led_init,
.check_mng_mode = e1000_check_mng_mode_ich8lan,
- .check_for_link = e1000e_check_for_copper_link,
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
.get_bus_info = e1000_get_bus_info_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index be6d9e9..99ba2b8 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,12 +378,6 @@
mac->get_link_status = 0;
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = e1000_link_stall_workaround_hv(hw);
- if (ret_val)
- return ret_val;
- }
-
/*
* Check if there was DownShift, must be checked
* immediately after link-up
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 679885a..63415bb 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4785,6 +4785,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
e1000e_down(adapter);
pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e23459c..994401f 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1531,7 +1531,12 @@
*/
ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
if (ret_val)
- break;
+ /*
+ * If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ udelay(usec_interval);
ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
if (ret_val)
break;
@@ -2737,6 +2742,11 @@
if (hw->phy.type != e1000_phy_82578)
goto out;
+ /* Do not apply workaround if in PHY loopback bit 14 set */
+ hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+ if (data & PHY_CONTROL_LB)
+ goto out;
+
/* check if link is up and at 1Gbps */
ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
if (ret_val)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index cc2ab64..4f70034 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1784,7 +1784,7 @@
printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
}
- for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) {
+ for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
dev = alloc_etherdev(sizeof(struct eepro_local));
if (!dev)
break;
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 1686dca..1f016d6 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1474,13 +1474,13 @@
outw(0x0000, ioaddr + 0x800c);
outw(0x0000, ioaddr + 0x800e);
- for (i = 0; i < (sizeof(start_code)); i+=32) {
+ for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) {
int j;
outw(i, ioaddr + SM_PTR);
- for (j = 0; j < 16; j+=2)
+ for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2)
outw(start_code[(i+j)/2],
ioaddr+0x4000+j);
- for (j = 0; j < 16; j+=2)
+ for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2)
outw(start_code[(i+j+16)/2],
ioaddr+0x8000+j);
}
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 78952f8..fa311a9 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0101"
+#define DRV_VERSION "EHEA_0102"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 147c4b0..977c3d3 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1545,6 +1545,9 @@
{
int ret, i;
+ if (pr->qp)
+ netif_napi_del(&pr->napi);
+
ret = ehea_destroy_qp(pr->qp);
if (!ret) {
@@ -3080,7 +3083,9 @@
.ndo_poll_controller = ehea_netpoll,
#endif
.ndo_get_stats = ehea_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = ehea_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = ehea_set_multicast_list,
.ndo_change_mtu = ehea_change_mtu,
.ndo_vlan_rx_register = ehea_vlan_rx_register,
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index b60e27d..88d7ebf 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -338,8 +338,7 @@
#ifndef MODULE
static int printed_version;
if (!printed_version++)
- printk (KERN_INFO "%s" KERN_INFO "%s",
- version, version2);
+ printk(KERN_INFO "%s%s", version, version2);
#endif
card_idx++;
@@ -1600,7 +1599,7 @@
{
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
- printk (KERN_INFO "%s" KERN_INFO "%s",
+ printk (KERN_INFO "%s%s",
version, version2);
#endif
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 891be28..160655d 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -584,7 +584,8 @@
if (np->flags == HAS_MII_XCVR) {
int phy, phy_idx = 0;
- for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
+ for (phy = 1; phy < 32 && phy_idx < ARRAY_SIZE(np->phys);
+ phy++) {
int mii_status = mdio_read(dev, phy, 1);
if (mii_status != 0xffff && mii_status != 0x0000) {
@@ -1209,17 +1210,20 @@
unsigned long flags;
int i;
- printk(KERN_WARNING "%s: Transmit timed out, status %8.8x,"
- " resetting...\n", dev->name, ioread32(ioaddr + ISR));
+ printk(KERN_WARNING
+ "%s: Transmit timed out, status %8.8x, resetting...\n",
+ dev->name, ioread32(ioaddr + ISR));
{
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int) np->rx_ring[i].status);
- printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ (unsigned int) np->rx_ring[i].status);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", np->tx_ring[i].status);
- printk("\n");
+ printk(KERN_CONT " %4.4x", np->tx_ring[i].status);
+ printk(KERN_CONT "\n");
}
spin_lock_irqsave(&np->lock, flags);
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 0f19b74..d4b9807 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1642,6 +1642,7 @@
.ndo_stop = fec_enet_close,
.ndo_start_xmit = fec_enet_start_xmit,
.ndo_set_multicast_list = set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = fec_timeout,
.ndo_set_mac_address = fec_set_mac_address,
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index 30b7dd6..cc47f3f 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -46,12 +46,12 @@
#else
-#define FEC_ECNTRL; 0x000 /* Ethernet control reg */
-#define FEC_IEVENT; 0x004 /* Interrupt even reg */
-#define FEC_IMASK; 0x008 /* Interrupt mask reg */
-#define FEC_IVEC; 0x00c /* Interrupt vec status reg */
-#define FEC_R_DES_ACTIVE; 0x010 /* Receive descriptor reg */
-#define FEC_X_DES_ACTIVE; 0x01c /* Transmit descriptor reg */
+#define FEC_ECNTRL 0x000 /* Ethernet control reg */
+#define FEC_IEVENT 0x004 /* Interrupt even reg */
+#define FEC_IMASK 0x008 /* Interrupt mask reg */
+#define FEC_IVEC 0x00c /* Interrupt vec status reg */
+#define FEC_R_DES_ACTIVE 0x010 /* Receive descriptor reg */
+#define FEC_X_DES_ACTIVE 0x014 /* Transmit descriptor reg */
#define FEC_MII_DATA 0x040 /* MII manage frame reg */
#define FEC_MII_SPEED 0x044 /* MII speed control reg */
#define FEC_R_BOUND 0x08c /* FIFO receive bound reg */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1094d29..3b4e076 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3514,11 +3514,13 @@
nv_msi_workaround(np);
#ifdef CONFIG_FORCEDETH_NAPI
- napi_schedule(&np->napi);
-
- /* Disable furthur irq's
- (msix not enabled with napi) */
- writel(0, base + NvRegIrqMask);
+ if (napi_schedule_prep(&np->napi)) {
+ /*
+ * Disable further irq's (msix not enabled with napi)
+ */
+ writel(0, base + NvRegIrqMask);
+ __napi_schedule(&np->napi);
+ }
#else
do
@@ -3615,12 +3617,13 @@
nv_msi_workaround(np);
#ifdef CONFIG_FORCEDETH_NAPI
- napi_schedule(&np->napi);
-
- /* Disable furthur irq's
- (msix not enabled with napi) */
- writel(0, base + NvRegIrqMask);
-
+ if (napi_schedule_prep(&np->napi)) {
+ /*
+ * Disable further irq's (msix not enabled with napi)
+ */
+ writel(0, base + NvRegIrqMask);
+ __napi_schedule(&np->napi);
+ }
#else
do
{
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index b892c3a..2bc2d2b 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -754,17 +754,16 @@
fep->oldlink = 0;
fep->oldspeed = 0;
fep->oldduplex = -1;
- if(fep->fpi->phy_node)
- phydev = of_phy_connect(dev, fep->fpi->phy_node,
- &fs_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
- else {
- printk("No phy bus ID specified in BSP code\n");
- return -EINVAL;
+
+ phydev = of_phy_connect(dev, fep->fpi->phy_node, &fs_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (!phydev) {
+ phydev = of_phy_connect_fixed_link(dev, &fs_adjust_link,
+ PHY_INTERFACE_MODE_MII);
}
- if (IS_ERR(phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(phydev);
+ if (!phydev) {
+ dev_err(&dev->dev, "Could not attach to PHY\n");
+ return -ENODEV;
}
fep->phydev = phydev;
@@ -1005,6 +1004,7 @@
goto out_free_fpi;
}
+ SET_NETDEV_DEV(ndev, &ofdev->dev);
dev_set_drvdata(&ofdev->dev, ndev);
fep = netdev_priv(ndev);
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 3af5813..d167090 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -188,7 +188,7 @@
}
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
{
struct gfar __iomem *enet_regs;
@@ -206,7 +206,7 @@
#endif
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
{
struct device_node *np = NULL;
@@ -291,7 +291,7 @@
if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
of_device_is_compatible(np, "fsl,gianfar-tbi") ||
of_device_is_compatible(np, "gianfar")) {
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
tbipa = get_gfar_tbipa(regs);
#else
err = -ENODEV;
@@ -299,7 +299,7 @@
#endif
} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
of_device_is_compatible(np, "ucc_geth_phy")) {
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
u32 id;
static u32 mii_mng_master;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4ae1d25..f8ffcbf 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -156,6 +156,8 @@
.ndo_tx_timeout = gfar_timeout,
.ndo_do_ioctl = gfar_ioctl,
.ndo_vlan_rx_register = gfar_vlan_rx_register,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gfar_netpoll,
#endif
@@ -262,15 +264,6 @@
priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
- if (!priv->phy_node) {
- u32 *fixed_link;
-
- fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
- if (!fixed_link) {
- err = -ENODEV;
- goto err_out;
- }
- }
/* Find the TBI PHY. If it's not there, we don't support SGMII */
priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -657,13 +650,14 @@
interface = gfar_get_interface(dev);
- if (priv->phy_node) {
- priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
- 0, interface);
- if (!priv->phydev) {
- dev_err(&dev->dev, "error: Could not attach to PHY\n");
- return -ENODEV;
- }
+ priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+ interface);
+ if (!priv->phydev)
+ priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+ interface);
+ if (!priv->phydev) {
+ dev_err(&dev->dev, "could not attach to PHY\n");
+ return -ENODEV;
}
if (interface == PHY_INTERFACE_MODE_SGMII)
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index dbf06e9..2234118 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -366,9 +366,8 @@
return -EINVAL;
}
- priv->rxic = mk_ic_value(
- gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs),
- cvals->rx_max_coalesced_frames);
+ priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
+ gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
/* Set up tx coalescing */
if ((cvals->tx_coalesce_usecs == 0) ||
@@ -390,9 +389,8 @@
return -EINVAL;
}
- priv->txic = mk_ic_value(
- gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs),
- cvals->tx_max_coalesced_frames);
+ priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
+ gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
gfar_write(&priv->regs->rxic, 0);
if (priv->rxcoalescing)
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 9d5b62c..d62378c 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -173,8 +173,8 @@
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n"
-KERN_INFO " Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
-KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
+" Some modifications by Eric kasten <kasten@nscl.msu.edu>\n"
+" Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n";
/* IP_MF appears to be only defined in <netinet/ip.h>, however,
@@ -1080,11 +1080,14 @@
{
printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length));
- printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ le32_to_cpu(hmp->rx_ring[i].status_n_length));
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length));
- printk("\n");
+ printk(KERN_CONT " %4.4x",
+ le32_to_cpu(hmp->tx_ring[i].status_n_length));
+ printk(KERN_CONT "\n");
}
/* Reinit the hardware and make sure the Rx and Tx processes
@@ -1753,13 +1756,13 @@
#ifdef __i386__
if (hamachi_debug > 2) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ printk(KERN_DEBUG " Tx ring at %8.8x:\n",
(int)hmp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %c #%d desc. %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n",
readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ',
i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)hmp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n",
@@ -1770,7 +1773,7 @@
u16 *addr = (u16 *)
hmp->rx_skbuff[i]->data;
int j;
-
+ printk(KERN_DEBUG "Addr: ");
for (j = 0; j < 0x50; j++)
printk(" %4.4x", addr[j]);
printk("\n");
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 1551600..981ab53 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -3,7 +3,7 @@
* devices like TTY. It interfaces between a raw TTY and the
* kernel's AX.25 protocol layers.
*
- * Authors: Andreas Könsgen <ajk@iehk.rwth-aachen.de>
+ * Authors: Andreas Könsgen <ajk@comnets.uni-bremen.de>
* Ralf Baechle DL5RB <ralf@linux-mips.org>
*
* Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 5e4b7af..3527032 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -68,7 +68,7 @@
static const char bc_drvname[] = "baycom_epp";
static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 2e6fc4d..5f5af9a 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -102,7 +102,7 @@
static const char bc_drvname[] = "baycom_par";
static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index b6a816e..aa4488e 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -91,7 +91,7 @@
static const char bc_drvname[] = "baycom_ser_fdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 3bcc57a..88c5935 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -79,7 +79,7 @@
static const char bc_drvname[] = "baycom_ser_hdx";
static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
-KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
+"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n";
/* --------------------------------------------------------------------- */
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c
index 1d5379d..8d76cb8 100644
--- a/drivers/net/ibm_newemac/rgmii.c
+++ b/drivers/net/ibm_newemac/rgmii.c
@@ -188,11 +188,12 @@
void rgmii_detach(struct of_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
- struct rgmii_regs __iomem *p = dev->base;
-
- mutex_lock(&dev->lock);
+ struct rgmii_regs __iomem *p;
BUG_ON(!dev || dev->users == 0);
+ p = dev->base;
+
+ mutex_lock(&dev->lock);
RGMII_DBG(dev, "detach(%d)" NL, input);
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index efd9be2..ac28dd5 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -190,6 +190,10 @@
phy->ops.write_reg = igb_write_phy_reg_igp;
}
+ /* set lan id */
+ hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+ E1000_STATUS_FUNC_SHIFT;
+
/* Set phy->phy_addr and phy->id. */
ret_val = igb_get_phy_id_82575(hw);
if (ret_val)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ea17319..adb09d3 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -127,14 +127,48 @@
static void igb_ping_all_vfs(struct igb_adapter *);
static void igb_msg_task(struct igb_adapter *);
static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
static void igb_vmm_control(struct igb_adapter *);
-static inline void igb_set_vmolr(struct e1000_hw *, int);
-static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int);
static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
+{
+ u32 reg_data;
+
+ reg_data = rd32(E1000_VMOLR(vfn));
+ reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */
+ E1000_VMOLR_ROPE | /* Accept packets matched in UTA */
+ E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */
+ E1000_VMOLR_AUPE | /* Accept untagged packets */
+ E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+ wr32(E1000_VMOLR(vfn), reg_data);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+ int vfn)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= size | E1000_VMOLR_LPE;
+ wr32(E1000_VMOLR(vfn), vmolr);
+
+ return 0;
+}
+
+static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
+{
+ u32 reg_data;
+
+ reg_data = rd32(E1000_RAH(entry));
+ reg_data &= ~E1000_RAH_POOL_MASK;
+ reg_data |= E1000_RAH_POOL_1 << pool;;
+ wr32(E1000_RAH(entry), reg_data);
+}
+
#ifdef CONFIG_PM
static int igb_suspend(struct pci_dev *, pm_message_t);
static int igb_resume(struct pci_dev *);
@@ -4549,11 +4583,12 @@
cleaned = true;
cleaned_count++;
+ /* this is the fast path for the non-packet split case */
if (!adapter->rx_ps_hdr_size) {
pci_unmap_single(pdev, buffer_info->dma,
- adapter->rx_buffer_len +
- NET_IP_ALIGN,
+ adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb_put(skb, length);
goto send_up;
}
@@ -4570,8 +4605,9 @@
if (!skb_shinfo(skb)->nr_frags) {
pci_unmap_single(pdev, buffer_info->dma,
- adapter->rx_ps_hdr_size + NET_IP_ALIGN,
+ adapter->rx_ps_hdr_size,
PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb_put(skb, hlen);
}
@@ -4713,7 +4749,6 @@
bufsz = adapter->rx_ps_hdr_size;
else
bufsz = adapter->rx_buffer_len;
- bufsz += NET_IP_ALIGN;
while (cleaned_count--) {
rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
@@ -4737,7 +4772,7 @@
}
if (!buffer_info->skb) {
- skb = netdev_alloc_skb(netdev, bufsz);
+ skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
if (!skb) {
adapter->alloc_rx_buff_failed++;
goto no_buffers;
@@ -5338,6 +5373,9 @@
netif_device_detach(netdev);
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
if (netif_running(netdev))
igb_down(adapter);
pci_disable_device(pdev);
@@ -5414,43 +5452,6 @@
igb_get_hw_control(adapter);
}
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
- u32 reg_data;
-
- reg_data = rd32(E1000_VMOLR(vfn));
- reg_data |= E1000_VMOLR_BAM | /* Accept broadcast */
- E1000_VMOLR_ROPE | /* Accept packets matched in UTA */
- E1000_VMOLR_ROMPE | /* Accept packets matched in MTA */
- E1000_VMOLR_AUPE | /* Accept untagged packets */
- E1000_VMOLR_STRVLAN; /* Strip vlan tags */
- wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
- int vfn)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 vmolr;
-
- vmolr = rd32(E1000_VMOLR(vfn));
- vmolr &= ~E1000_VMOLR_RLPML_MASK;
- vmolr |= size | E1000_VMOLR_LPE;
- wr32(E1000_VMOLR(vfn), vmolr);
-
- return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
- u32 reg_data;
-
- reg_data = rd32(E1000_RAH(entry));
- reg_data &= ~E1000_RAH_POOL_MASK;
- reg_data |= E1000_RAH_POOL_1 << pool;;
- wr32(E1000_RAH(entry), reg_data);
-}
-
static void igb_set_mc_list_pools(struct igb_adapter *adapter,
int entry_count, u16 total_rar_filters)
{
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c
index 2a4faf9..a9a61ef 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/igbvf/vf.c
@@ -274,6 +274,8 @@
err = mbx->ops.read_posted(hw, msgbuf, 2);
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
/* if nacked the vlan was rejected */
if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
err = -E1000_ERR_MAC_INIT;
@@ -317,6 +319,8 @@
if (!ret_val)
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
/* if nacked the address was rejected, use "perm_addr" */
if (!ret_val &&
(msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
index f3eed6a..911c082 100644
--- a/drivers/net/irda/bfin_sir.c
+++ b/drivers/net/irda/bfin_sir.c
@@ -677,6 +677,14 @@
return 0;
}
+static const struct net_device_ops bfin_sir_ndo = {
+ .ndo_open = bfin_sir_open,
+ .ndo_stop = bfin_sir_stop,
+ .ndo_start_xmit = bfin_sir_hard_xmit,
+ .ndo_do_ioctl = bfin_sir_ioctl,
+ .ndo_get_stats = bfin_sir_stats,
+};
+
static int __devinit bfin_sir_probe(struct platform_device *pdev)
{
struct net_device *dev;
@@ -718,12 +726,8 @@
if (err)
goto err_mem_3;
- dev->hard_start_xmit = bfin_sir_hard_xmit;
- dev->open = bfin_sir_open;
- dev->stop = bfin_sir_stop;
- dev->do_ioctl = bfin_sir_ioctl;
- dev->get_stats = bfin_sir_stats;
- dev->irq = sir_port->irq;
+ dev->netdev_ops = &bfin_sir_ndo;
+ dev->irq = sir_port->irq;
irda_init_max_qos_capabilies(&self->qos);
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index d53aa95..20f9bc6 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -31,7 +31,6 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <asm/uaccess.h>
-#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/mutex.h>
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index 73585fd..d12377b 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -430,7 +430,8 @@
* hardware interrupt handler. Queue flow control is
* thus managed under this lock as well.
*/
- spin_lock_irq(&np->lock);
+ unsigned long flags;
+ spin_lock_irqsave(&np->lock, flags);
add_to_tx_ring(np, skb, length);
dev->trans_start = jiffies;
@@ -446,7 +447,7 @@
* is when the transmit statistics are updated.
*/
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
#else
/* This is the case for older hardware which takes
* a single transmit buffer at a time, and it is
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index cd22323..e11d83d 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -96,6 +96,8 @@
#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
+#define IXGBE_MAX_RSC_INT_RATE 162760
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
@@ -327,6 +329,7 @@
#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 25)
#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 26)
#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 28)
#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 29)
u32 flags2;
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index b992304..522c03b 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -50,6 +50,51 @@
u8 *eeprom_data);
/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pci_read_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ pci_write_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
* ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
* @hw: pointer to hardware structure
*
@@ -153,6 +198,26 @@
}
/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+
+ /* set the completion timeout for interface */
+ if (ret_val == 0)
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
+/**
* ixgbe_get_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
@@ -1085,7 +1150,7 @@
static struct ixgbe_mac_operations mac_ops_82598 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82598,
- .start_hw = &ixgbe_start_hw_generic,
+ .start_hw = &ixgbe_start_hw_82598,
.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index d56890f..1c72657 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -106,8 +106,6 @@
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- DPRINTK(DRV, INFO, "Get DCB Admin Mode.\n");
-
return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
}
@@ -116,8 +114,6 @@
u8 err = 0;
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- DPRINTK(DRV, INFO, "Set DCB Admin Mode.\n");
-
if (state > 0) {
/* Turn on DCB */
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
@@ -138,7 +134,23 @@
adapter->hw.fc.requested_mode = ixgbe_fc_none;
}
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+ }
adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+#ifdef IXGBE_FCOE
+ /* Turn on FCoE offload */
+ if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) &&
+ (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) {
+ adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices =
+ IXGBE_FCRETA_SIZE;
+ netdev->features |= NETIF_F_FCOE_CRC;
+ netdev->features |= NETIF_F_FSO;
+ netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+ }
+#endif /* IXGBE_FCOE */
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
@@ -154,6 +166,20 @@
adapter->dcb_cfg.pfc_mode_enable = false;
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+ /* Turn off FCoE offload */
+ if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE |
+ IXGBE_FLAG_FCOE_ENABLED)) {
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
+ netdev->features &= ~NETIF_F_FCOE_CRC;
+ netdev->features &= ~NETIF_F_FSO;
+ netdev->fcoe_ddp_xid = 0;
+ }
+#endif /* IXGBE_FCOE */
ixgbe_init_interrupt_scheme(adapter);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
@@ -169,6 +195,8 @@
struct ixgbe_adapter *adapter = netdev_priv(netdev);
int i, j;
+ memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
for (i = 0; i < netdev->addr_len; i++)
perm_addr[i] = adapter->hw.mac.perm_addr[i];
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 86f4f3e..79144e9 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -139,7 +139,7 @@
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->transceiver = XCVR_EXTERNAL;
if ((hw->phy.media_type == ixgbe_media_type_copper) ||
- (hw->mac.type == ixgbe_mac_82599EB)) {
+ (hw->phy.multispeed_fiber)) {
ecmd->supported |= (SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg);
@@ -217,7 +217,7 @@
s32 err = 0;
if ((hw->phy.media_type == ixgbe_media_type_copper) ||
- (hw->mac.type == ixgbe_mac_82599EB)) {
+ (hw->phy.multispeed_fiber)) {
/* 10000/copper and 1000/copper must autoneg
* this function does not support any duplex forcing, but can
* limit the advertising of the adapter to only 10000 or 1000 */
@@ -245,6 +245,7 @@
} else {
/* in this case we currently only support 10Gb/FULL */
if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+ (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
(ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
return -EINVAL;
}
@@ -1829,7 +1830,6 @@
break;
default:
wol->supported = 0;
- retval = 0;
}
return retval;
@@ -1975,7 +1975,10 @@
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
- adapter->eitr_param = IXGBE_MAX_INT_RATE;
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+ adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+ else
+ adapter->eitr_param = IXGBE_MAX_INT_RATE;
adapter->itr_setting = 0;
}
@@ -1999,13 +2002,13 @@
ethtool_op_set_flags(netdev, data);
- if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
return 0;
/* if state changes we need to update adapter->flags and reset */
if ((!!(data & ETH_FLAG_LRO)) !=
- (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
- adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+ (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+ adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
if (netif_running(netdev))
ixgbe_reinit_locked(adapter);
else
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e756e22..110c65a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -34,6 +34,7 @@
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
+#include <linux/pkt_sched.h>
#include <linux/ipv6.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
@@ -510,8 +511,11 @@
* @skb: skb currently being received and modified
**/
static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
- u32 status_err, struct sk_buff *skb)
+ union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
{
+ u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error);
+
skb->ip_summed = CHECKSUM_NONE;
/* Rx csum disabled */
@@ -529,6 +533,16 @@
return;
if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+ u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+ /*
+ * 82599 errata, UDP frames with a 0 checksum can be marked as
+ * checksum errors.
+ */
+ if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
+ (adapter->hw.mac.type == ixgbe_mac_82599EB))
+ return;
+
adapter->hw_csum_rx_error++;
return;
}
@@ -563,7 +577,6 @@
union ixgbe_adv_rx_desc *rx_desc;
struct ixgbe_rx_buffer *bi;
unsigned int i;
- unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
bi = &rx_ring->rx_buffer_info[i];
@@ -593,7 +606,9 @@
if (!bi->skb) {
struct sk_buff *skb;
- skb = netdev_alloc_skb(adapter->netdev, bufsz);
+ skb = netdev_alloc_skb(adapter->netdev,
+ (rx_ring->rx_buf_len +
+ NET_IP_ALIGN));
if (!skb) {
adapter->alloc_rx_buff_failed++;
@@ -608,7 +623,8 @@
skb_reserve(skb, NET_IP_ALIGN);
bi->skb = skb;
- bi->dma = pci_map_single(pdev, skb->data, bufsz,
+ bi->dma = pci_map_single(pdev, skb->data,
+ rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
}
/* Refresh the desc even if buffer_addrs didn't change because
@@ -732,6 +748,7 @@
pci_unmap_single(pdev, rx_buffer_info->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ rx_buffer_info->dma = 0;
skb_put(skb, len);
}
@@ -763,7 +780,7 @@
prefetch(next_rxd);
cleaned_count++;
- if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
rsc_count = ixgbe_get_rsc_count(rx_desc);
if (rsc_count) {
@@ -799,7 +816,7 @@
goto next_desc;
}
- ixgbe_rx_checksum(adapter, staterr, skb);
+ ixgbe_rx_checksum(adapter, rx_desc, skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
@@ -2019,7 +2036,7 @@
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
}
} else {
- if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
(netdev->mtu <= ETH_DATA_LEN))
rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
else
@@ -2148,7 +2165,7 @@
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
}
- if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
for (i = 0; i < adapter->num_rx_queues; i++) {
j = adapter->rx_ring[i].reg_idx;
@@ -2694,16 +2711,23 @@
/*
* For hot-pluggable SFP+ devices, a new SFP+ module may have
- * arrived before interrupts were enabled. We need to kick off
- * the SFP+ module setup first, then try to bring up link.
+ * arrived before interrupts were enabled but after probe. Such
+ * devices wouldn't have their type identified yet. We need to
+ * kick off the SFP+ module setup first, then try to bring up link.
* If we're not hot-pluggable SFP+, we just need to configure link
* and bring it up.
*/
- err = hw->phy.ops.identify(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
- ixgbe_down(adapter);
- return err;
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ err = hw->phy.ops.identify(hw);
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ /*
+ * Take the device down and schedule the sfp tasklet
+ * which will unregister_netdev and log it.
+ */
+ ixgbe_down(adapter);
+ schedule_work(&adapter->sfp_config_module_task);
+ return err;
+ }
}
if (ixgbe_is_sfp(hw)) {
@@ -2812,9 +2836,11 @@
}
if (!rx_buffer_info->page)
continue;
- pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2,
- PCI_DMA_FROMDEVICE);
- rx_buffer_info->page_dma = 0;
+ if (rx_buffer_info->page_dma) {
+ pci_unmap_page(pdev, rx_buffer_info->page_dma,
+ PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
+ rx_buffer_info->page_dma = 0;
+ }
put_page(rx_buffer_info->page);
rx_buffer_info->page = NULL;
rx_buffer_info->page_offset = 0;
@@ -3118,7 +3144,11 @@
#endif
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n");
- ixgbe_set_rss_queues(adapter);
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+ (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ ixgbe_set_fdir_queues(adapter);
+ else
+ ixgbe_set_rss_queues(adapter);
}
/* adding FCoE rx rings to the end */
f->mask = adapter->num_rx_queues;
@@ -3376,7 +3406,12 @@
}
#endif /* CONFIG_IXGBE_DCB */
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- ixgbe_cache_ring_rss(adapter);
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+ (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ ixgbe_cache_ring_fdir(adapter);
+ else
+ ixgbe_cache_ring_rss(adapter);
+
fcoe_i = f->mask;
}
for (i = 0; i < f->indices; i++, fcoe_i++)
@@ -3716,14 +3751,15 @@
if ((hw->phy.type == ixgbe_phy_nl) &&
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
s32 ret = hw->phy.ops.identify_sfp(hw);
- if (ret)
+ if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
goto reschedule;
ret = hw->phy.ops.reset(hw);
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "failed to initialize because an "
- "unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a "
- "supported module.\n");
+ dev_err(&adapter->pdev->dev, "failed to initialize "
+ "because an unsupported SFP+ module type "
+ "was detected.\n"
+ "Reload the driver after installing a "
+ "supported module.\n");
unregister_netdev(adapter->netdev);
} else {
DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
@@ -3776,16 +3812,17 @@
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
} else if (hw->mac.type == ixgbe_mac_82599EB) {
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
- adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
- adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->ring_feature[RING_F_FDIR].indices =
IXGBE_MAX_FDIR_INDICES;
adapter->atr_sample_rate = 20;
adapter->fdir_pballoc = 0;
#ifdef IXGBE_FCOE
- adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+ adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
#endif /* IXGBE_FCOE */
}
@@ -4502,7 +4539,8 @@
u32 autoneg;
adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
- if (hw->mac.ops.get_link_capabilities)
+ autoneg = hw->phy.autoneg_advertised;
+ if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg,
&hw->mac.autoneg);
if (hw->mac.ops.setup_link_speed)
@@ -4524,10 +4562,17 @@
u32 err;
adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+ /* Time for electrical oscillations to settle down */
+ msleep(100);
err = hw->phy.ops.identify_sfp(hw);
+
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
- ixgbe_down(adapter);
+ dev_err(&adapter->pdev->dev, "failed to initialize because "
+ "an unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a supported "
+ "module.\n");
+ unregister_netdev(adapter->netdev);
return;
}
hw->mac.ops.setup_sfp(hw);
@@ -5095,9 +5140,6 @@
int count = 0;
unsigned int f;
- r_idx = skb->queue_mapping;
- tx_ring = &adapter->tx_ring[r_idx];
-
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
tx_flags |= vlan_tx_tag_get(skb);
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
@@ -5107,11 +5149,19 @@
tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
tx_flags |= IXGBE_TX_FLAGS_VLAN;
} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- tx_flags |= (skb->queue_mapping << 13);
- tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
- tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ if (skb->priority != TC_PRIO_CONTROL) {
+ tx_flags |= (skb->queue_mapping << 13);
+ tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ } else {
+ skb->queue_mapping =
+ adapter->ring_feature[RING_F_DCB].indices-1;
+ }
}
+ r_idx = skb->queue_mapping;
+ tx_ring = &adapter->tx_ring[r_idx];
+
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
(skb->protocol == htons(ETH_P_FCOE)))
tx_flags |= IXGBE_TX_FLAGS_FCOE;
@@ -5310,12 +5360,19 @@
static void ixgbe_netpoll(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i;
- disable_irq(adapter->pdev->irq);
adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
- ixgbe_intr(adapter->pdev->irq, netdev);
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+ ixgbe_msix_clean_many(0, q_vector);
+ }
+ } else {
+ ixgbe_intr(adapter->pdev->irq, netdev);
+ }
adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
- enable_irq(adapter->pdev->irq);
}
#endif
@@ -5513,8 +5570,10 @@
round_jiffies(jiffies + (2 * HZ)));
err = 0;
} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to load because an "
- "unsupported SFP+ module type was detected.\n");
+ dev_err(&adapter->pdev->dev, "failed to initialize because "
+ "an unsupported SFP+ module type was detected.\n"
+ "Reload the driver after installing a supported "
+ "module.\n");
goto err_sw_init;
} else if (err) {
dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
@@ -5548,29 +5607,18 @@
#endif
#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+ if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
if (hw->mac.ops.get_device_caps) {
hw->mac.ops.get_device_caps(hw, &device_caps);
- if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
- netdev->features |= NETIF_F_FCOE_CRC;
- netdev->features |= NETIF_F_FSO;
- netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- DPRINTK(DRV, INFO, "FCoE enabled, "
- "disabling Flow Director\n");
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->flags &=
- ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
- adapter->atr_sample_rate = 0;
- } else {
- adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
- }
+ if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+ adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
}
}
#endif /* IXGBE_FCOE */
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
netdev->features |= NETIF_F_LRO;
/* make sure the EEPROM is good */
@@ -5612,7 +5660,6 @@
adapter->wol = 0;
break;
}
- device_init_wakeup(&adapter->pdev->dev, true);
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* pick up the PCI bus settings for reporting later */
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966..9ecad17 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@
if (hw->phy.type == ixgbe_phy_unknown) {
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.mdio.prtad = phy_addr;
if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
ixgbe_get_phy_id(hw);
hw->phy.type =
@@ -68,6 +69,8 @@
break;
}
}
+ /* clear value if nothing found */
+ hw->phy.mdio.prtad = 0;
} else {
status = 0;
}
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index fa87309..be90eb4 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -718,6 +718,12 @@
#define IXGBE_ECC_STATUS_82599 0x110E0
#define IXGBE_BAR_CTRL_82599 0x110F4
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define IXGBE_GCR_CAP_VER2 0x00040000
+
/* Time Sync Registers */
#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
@@ -1521,6 +1527,7 @@
/* PCI Bus Info */
#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
#define IXGBE_PCI_LINK_WIDTH 0x3F0
#define IXGBE_PCI_LINK_WIDTH_1 0x10
#define IXGBE_PCI_LINK_WIDTH_2 0x20
@@ -1531,6 +1538,7 @@
#define IXGBE_PCI_LINK_SPEED_5000 0x2
#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
/* Number of 100 microseconds we wait for PCI Express master disable */
#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index d12106b..2f28609 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -229,6 +229,7 @@
lp = netdev_priv(dev);
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
netdev_boot_setup_check(dev);
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
new file mode 100644
index 0000000..9a1dea6
--- /dev/null
+++ b/drivers/net/ks8851.c
@@ -0,0 +1,1322 @@
+/* drivers/net/ks8651.c
+ *
+ * Copyright 2009 Simtec Electronics
+ * http://www.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+
+#include <linux/spi/spi.h>
+
+#include "ks8851.h"
+
+/**
+ * struct ks8851_rxctrl - KS8851 driver rx control
+ * @mchash: Multicast hash-table data.
+ * @rxcr1: KS_RXCR1 register setting
+ * @rxcr2: KS_RXCR2 register setting
+ *
+ * Representation of the settings needs to control the receive filtering
+ * such as the multicast hash-filter and the receive register settings. This
+ * is used to make the job of working out if the receive settings change and
+ * then issuing the new settings to the worker that will send the necessary
+ * commands.
+ */
+struct ks8851_rxctrl {
+ u16 mchash[4];
+ u16 rxcr1;
+ u16 rxcr2;
+};
+
+/**
+ * union ks8851_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks8851_tx_hdr {
+ u8 txb[6];
+ __le16 txw[3];
+};
+
+/**
+ * struct ks8851_net - KS8851 driver private data
+ * @netdev: The network device we're bound to
+ * @spidev: The spi device we're bound to.
+ * @lock: Lock to ensure that the device is not accessed when busy.
+ * @statelock: Lock on this structure for tx list.
+ * @mii: The MII state information for the mii calls.
+ * @rxctrl: RX settings for @rxctrl_work.
+ * @tx_work: Work queue for tx packets
+ * @irq_work: Work queue for servicing interrupts
+ * @rxctrl_work: Work queue for updating RX mode and multicast lists
+ * @txq: Queue of packets for transmission.
+ * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
+ * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
+ * @txh: Space for generating packet TX header in DMA-able data
+ * @rxd: Space for receiving SPI data, in DMA-able space.
+ * @txd: Space for transmitting SPI data, in DMA-able space.
+ * @msg_enable: The message flags controlling driver output (see ethtool).
+ * @fid: Incrementing frame id tag.
+ * @rc_ier: Cached copy of KS_IER.
+ * @rc_rxqcr: Cached copy of KS_RXQCR.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not ccessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ * We align the buffers we may use for rx/tx to ensure that if the SPI driver
+ * wants to DMA map them, it will not have any problems with data the driver
+ * modifies.
+ */
+struct ks8851_net {
+ struct net_device *netdev;
+ struct spi_device *spidev;
+ struct mutex lock;
+ spinlock_t statelock;
+
+ union ks8851_tx_hdr txh ____cacheline_aligned;
+ u8 rxd[8];
+ u8 txd[8];
+
+ u32 msg_enable ____cacheline_aligned;
+ u16 tx_space;
+ u8 fid;
+
+ u16 rc_ier;
+ u16 rc_rxqcr;
+
+ struct mii_if_info mii;
+ struct ks8851_rxctrl rxctrl;
+
+ struct work_struct tx_work;
+ struct work_struct irq_work;
+ struct work_struct rxctrl_work;
+
+ struct sk_buff_head txq;
+
+ struct spi_message spi_msg1;
+ struct spi_message spi_msg2;
+ struct spi_transfer spi_xfer1;
+ struct spi_transfer spi_xfer2[2];
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->spidev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->spidev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->spidev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->spidev->dev, _msg)
+
+/* shift for byte-enable data */
+#define BYTE_EN(_x) ((_x) << 2)
+
+/* turn register number and byte-enable mask into data for start of packet */
+#define MK_OP(_byteen, _reg) (BYTE_EN(_byteen) | (_reg) << (8+2) | (_reg) >> 6)
+
+/* SPI register read/write calls.
+ *
+ * All these calls issue SPI transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks8851_wrreg16 - write 16bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
+{
+ struct spi_transfer *xfer = &ks->spi_xfer1;
+ struct spi_message *msg = &ks->spi_msg1;
+ __le16 txb[2];
+ int ret;
+
+ txb[0] = cpu_to_le16(MK_OP(reg & 2 ? 0xC : 0x03, reg) | KS_SPIOP_WR);
+ txb[1] = cpu_to_le16(val);
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 4;
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "spi_sync() failed\n");
+}
+
+/**
+ * ks8851_rx_1msg - select whether to use one or two messages for spi read
+ * @ks: The device structure
+ *
+ * Return whether to generate a single message with a tx and rx buffer
+ * supplied to spi_sync(), or alternatively send the tx and rx buffers
+ * as separate messages.
+ *
+ * Depending on the hardware in use, a single message may be more efficient
+ * on interrupts or work done by the driver.
+ *
+ * This currently always returns true until we add some per-device data passed
+ * from the platform code to specify which mode is better.
+ */
+static inline bool ks8851_rx_1msg(struct ks8851_net *ks)
+{
+ return true;
+}
+
+/**
+ * ks8851_rdreg - issue read register command and return the data
+ * @ks: The device state
+ * @op: The register address and byte enables in message format.
+ * @rxb: The RX buffer to return the result into
+ * @rxl: The length of data expected.
+ *
+ * This is the low level read call that issues the necessary spi message(s)
+ * to read data from the register specified in @op.
+ */
+static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
+ u8 *rxb, unsigned rxl)
+{
+ struct spi_transfer *xfer;
+ struct spi_message *msg;
+ __le16 *txb = (__le16 *)ks->txd;
+ u8 *trx = ks->rxd;
+ int ret;
+
+ txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
+
+ if (ks8851_rx_1msg(ks)) {
+ msg = &ks->spi_msg1;
+ xfer = &ks->spi_xfer1;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = trx;
+ xfer->len = rxl + 2;
+ } else {
+ msg = &ks->spi_msg2;
+ xfer = ks->spi_xfer2;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 2;
+
+ xfer++;
+ xfer->tx_buf = NULL;
+ xfer->rx_buf = trx;
+ xfer->len = rxl;
+ }
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "read: spi_sync() failed\n");
+ else if (ks8851_rx_1msg(ks))
+ memcpy(rxb, trx + 2, rxl);
+ else
+ memcpy(rxb, trx, rxl);
+}
+
+/**
+ * ks8851_rdreg8 - read 8 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg8(struct ks8851_net *ks, unsigned reg)
+{
+ u8 rxb[1];
+
+ ks8851_rdreg(ks, MK_OP(1 << (reg & 3), reg), rxb, 1);
+ return rxb[0];
+}
+
+/**
+ * ks8851_rdreg16 - read 16 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg16(struct ks8851_net *ks, unsigned reg)
+{
+ __le16 rx = 0;
+
+ ks8851_rdreg(ks, MK_OP(reg & 2 ? 0xC : 0x3, reg), (u8 *)&rx, 2);
+ return le16_to_cpu(rx);
+}
+
+/**
+ * ks8851_rdreg32 - read 32 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 32bit register from the chip.
+ *
+ * Note, this read requires the address be aligned to 4 bytes.
+*/
+static unsigned ks8851_rdreg32(struct ks8851_net *ks, unsigned reg)
+{
+ __le32 rx = 0;
+
+ WARN_ON(reg & 3);
+
+ ks8851_rdreg(ks, MK_OP(0xf, reg), (u8 *)&rx, 4);
+ return le32_to_cpu(rx);
+}
+
+/**
+ * ks8851_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op)
+{
+ ks8851_wrreg16(ks, KS_GRR, op);
+ mdelay(1); /* wait a short time to effect reset */
+ ks8851_wrreg16(ks, KS_GRR, 0);
+ mdelay(1); /* wait for condition to clear */
+}
+
+/**
+ * ks8851_write_mac_addr - write mac address to device registers
+ * @dev: The network device
+ *
+ * Update the KS8851 MAC address registers from the address in @dev.
+ *
+ * This call assumes that the chip is not running, so there is no need to
+ * shutdown the RXQ process whilst setting this.
+*/
+static int ks8851_write_mac_addr(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ u16 *mcp = (u16 *)dev->dev_addr;
+
+ mutex_lock(&ks->lock);
+
+ ks8851_wrreg16(ks, KS_MARL, mcp[0]);
+ ks8851_wrreg16(ks, KS_MARM, mcp[1]);
+ ks8851_wrreg16(ks, KS_MARH, mcp[2]);
+
+ mutex_unlock(&ks->lock);
+
+ return 0;
+}
+
+/**
+ * ks8851_init_mac - initialise the mac address
+ * @ks: The device structure
+ *
+ * Get or create the initial mac address for the device and then set that
+ * into the station address register. Currently we assume that the device
+ * does not have a valid mac address in it, and so we use random_ether_addr()
+ * to create a new one.
+ *
+ * In future, the driver should check to see if the device has an EEPROM
+ * attached and whether that has a valid ethernet address in it.
+ */
+static void ks8851_init_mac(struct ks8851_net *ks)
+{
+ struct net_device *dev = ks->netdev;
+
+ random_ether_addr(dev->dev_addr);
+ ks8851_write_mac_addr(dev);
+}
+
+/**
+ * ks8851_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks8851_net.
+ *
+ * Disable the interrupt from happening again until we've processed the
+ * current status by scheduling ks8851_irq_work().
+ */
+static irqreturn_t ks8851_irq(int irq, void *pw)
+{
+ struct ks8851_net *ks = pw;
+
+ disable_irq_nosync(irq);
+ schedule_work(&ks->irq_work);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ks8851_rdfifo - read data from the receive fifo
+ * @ks: The device state.
+ * @buff: The buffer address
+ * @len: The length of the data to read
+ *
+ * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * the FIFO into the buffer specified by @buff.
+ */
+static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
+{
+ struct spi_transfer *xfer = ks->spi_xfer2;
+ struct spi_message *msg = &ks->spi_msg2;
+ u8 txb[1];
+ int ret;
+
+ if (netif_msg_rx_status(ks))
+ ks_dbg(ks, "%s: %d@%p\n", __func__, len, buff);
+
+ /* set the operation we're issuing */
+ txb[0] = KS_SPIOP_RXFIFO;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 1;
+
+ xfer++;
+ xfer->rx_buf = buff;
+ xfer->tx_buf = NULL;
+ xfer->len = len;
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_dbg_dumpkkt - dump initial packet contents to debug
+ * @ks: The device state
+ * @rxpkt: The data for the received packet
+ *
+ * Dump the initial data from the packet to dev_dbg().
+*/
+static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt)
+{
+ ks_dbg(ks, "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
+ rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7],
+ rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11],
+ rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]);
+}
+
+/**
+ * ks8851_rx_pkts - receive packets from the host
+ * @ks: The device information.
+ *
+ * This is called from the IRQ work queue when the system detects that there
+ * are packets in the receive queue. Find out how many packets there are and
+ * read them from the FIFO.
+ */
+static void ks8851_rx_pkts(struct ks8851_net *ks)
+{
+ struct sk_buff *skb;
+ unsigned rxfc;
+ unsigned rxlen;
+ unsigned rxstat;
+ u32 rxh;
+ u8 *rxpkt;
+
+ rxfc = ks8851_rdreg8(ks, KS_RXFC);
+
+ if (netif_msg_rx_status(ks))
+ ks_dbg(ks, "%s: %d packets\n", __func__, rxfc);
+
+ /* Currently we're issuing a read per packet, but we could possibly
+ * improve the code by issuing a single read, getting the receive
+ * header, allocating the packet and then reading the packet data
+ * out in one go.
+ *
+ * This form of operation would require us to hold the SPI bus'
+ * chipselect low during the entie transaction to avoid any
+ * reset to the data stream comming from the chip.
+ */
+
+ for (; rxfc != 0; rxfc--) {
+ rxh = ks8851_rdreg32(ks, KS_RXFHSR);
+ rxstat = rxh & 0xffff;
+ rxlen = rxh >> 16;
+
+ if (netif_msg_rx_status(ks))
+ ks_dbg(ks, "rx: stat 0x%04x, len 0x%04x\n",
+ rxstat, rxlen);
+
+ /* the length of the packet includes the 32bit CRC */
+
+ /* set dma read address */
+ ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
+
+ /* start the packet dma process, and set auto-dequeue rx */
+ ks8851_wrreg16(ks, KS_RXQCR,
+ ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE);
+
+ if (rxlen > 0) {
+ skb = netdev_alloc_skb(ks->netdev, rxlen + 2 + 8);
+ if (!skb) {
+ /* todo - dump frame and move on */
+ }
+
+ /* two bytes to ensure ip is aligned, and four bytes
+ * for the status header and 4 bytes of garbage */
+ skb_reserve(skb, 2 + 4 + 4);
+
+ rxpkt = skb_put(skb, rxlen - 4) - 8;
+
+ /* align the packet length to 4 bytes, and add 4 bytes
+ * as we're getting the rx status header as well */
+ ks8851_rdfifo(ks, rxpkt, ALIGN(rxlen, 4) + 8);
+
+ if (netif_msg_pktdata(ks))
+ ks8851_dbg_dumpkkt(ks, rxpkt);
+
+ skb->protocol = eth_type_trans(skb, ks->netdev);
+ netif_rx(skb);
+
+ ks->netdev->stats.rx_packets++;
+ ks->netdev->stats.rx_bytes += rxlen - 4;
+ }
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+ }
+}
+
+/**
+ * ks8851_irq_work - work queue handler for dealing with interrupt requests
+ * @work: The work structure that was scheduled by schedule_work()
+ *
+ * This is the handler invoked when the ks8851_irq() is called to find out
+ * what happened, as we cannot allow ourselves to sleep whilst waiting for
+ * anything other process has the chip's lock.
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+static void ks8851_irq_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, irq_work);
+ unsigned status;
+ unsigned handled = 0;
+
+ mutex_lock(&ks->lock);
+
+ status = ks8851_rdreg16(ks, KS_ISR);
+
+ if (netif_msg_intr(ks))
+ dev_dbg(&ks->spidev->dev, "%s: status 0x%04x\n",
+ __func__, status);
+
+ if (status & IRQ_LCI) {
+ /* should do something about checking link status */
+ handled |= IRQ_LCI;
+ }
+
+ if (status & IRQ_LDI) {
+ u16 pmecr = ks8851_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_WKEVT_MASK;
+ ks8851_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+
+ handled |= IRQ_LDI;
+ }
+
+ if (status & IRQ_RXPSI)
+ handled |= IRQ_RXPSI;
+
+ if (status & IRQ_TXI) {
+ handled |= IRQ_TXI;
+
+ /* no lock here, tx queue should have been stopped */
+
+ /* update our idea of how much tx space is available to the
+ * system */
+ ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
+
+ if (netif_msg_intr(ks))
+ ks_dbg(ks, "%s: txspace %d\n", __func__, ks->tx_space);
+ }
+
+ if (status & IRQ_RXI)
+ handled |= IRQ_RXI;
+
+ if (status & IRQ_SPIBEI) {
+ dev_err(&ks->spidev->dev, "%s: spi bus error\n", __func__);
+ handled |= IRQ_SPIBEI;
+ }
+
+ ks8851_wrreg16(ks, KS_ISR, handled);
+
+ if (status & IRQ_RXI) {
+ /* the datasheet says to disable the rx interrupt during
+ * packet read-out, however we're masking the interrupt
+ * from the device so do not bother masking just the RX
+ * from the device. */
+
+ ks8851_rx_pkts(ks);
+ }
+
+ /* if something stopped the rx process, probably due to wanting
+ * to change the rx settings, then do something about restarting
+ * it. */
+ if (status & IRQ_RXPSI) {
+ struct ks8851_rxctrl *rxc = &ks->rxctrl;
+
+ /* update the multicast hash table */
+ ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]);
+ ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]);
+ ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]);
+ ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]);
+
+ ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2);
+ ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1);
+ }
+
+ mutex_unlock(&ks->lock);
+
+ if (status & IRQ_TXI)
+ netif_wake_queue(ks->netdev);
+
+ enable_irq(ks->netdev->irq);
+}
+
+/**
+ * calc_txlen - calculate size of message to send packet
+ * @len: Lenght of data
+ *
+ * Returns the size of the TXFIFO message needed to send
+ * this packet.
+ */
+static inline unsigned calc_txlen(unsigned len)
+{
+ return ALIGN(len + 4, 4);
+}
+
+/**
+ * ks8851_wrpkt - write packet to TX FIFO
+ * @ks: The device state.
+ * @txp: The sk_buff to transmit.
+ * @irq: IRQ on completion of the packet.
+ *
+ * Send the @txp to the chip. This means creating the relevant packet header
+ * specifying the length of the packet and the other information the chip
+ * needs, such as IRQ on completion. Send the header and the packet data to
+ * the device.
+ */
+static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
+{
+ struct spi_transfer *xfer = ks->spi_xfer2;
+ struct spi_message *msg = &ks->spi_msg2;
+ unsigned fid = 0;
+ int ret;
+
+ if (netif_msg_tx_queued(ks))
+ dev_dbg(&ks->spidev->dev, "%s: skb %p, %d@%p, irq %d\n",
+ __func__, txp, txp->len, txp->data, irq);
+
+ fid = ks->fid++;
+ fid &= TXFR_TXFID_MASK;
+
+ if (irq)
+ fid |= TXFR_TXIC; /* irq on completion */
+
+ /* start header at txb[1] to align txw entries */
+ ks->txh.txb[1] = KS_SPIOP_TXFIFO;
+ ks->txh.txw[1] = cpu_to_le16(fid);
+ ks->txh.txw[2] = cpu_to_le16(txp->len);
+
+ xfer->tx_buf = &ks->txh.txb[1];
+ xfer->rx_buf = NULL;
+ xfer->len = 5;
+
+ xfer++;
+ xfer->tx_buf = txp->data;
+ xfer->rx_buf = NULL;
+ xfer->len = ALIGN(txp->len, 4);
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_done_tx - update and then free skbuff after transmitting
+ * @ks: The device state
+ * @txb: The buffer transmitted
+ */
+static void ks8851_done_tx(struct ks8851_net *ks, struct sk_buff *txb)
+{
+ struct net_device *dev = ks->netdev;
+
+ dev->stats.tx_bytes += txb->len;
+ dev->stats.tx_packets++;
+
+ dev_kfree_skb(txb);
+}
+
+/**
+ * ks8851_tx_work - process tx packet(s)
+ * @work: The work strucutre what was scheduled.
+ *
+ * This is called when a number of packets have been scheduled for
+ * transmission and need to be sent to the device.
+ */
+static void ks8851_tx_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
+ struct sk_buff *txb;
+ bool last = false;
+
+ mutex_lock(&ks->lock);
+
+ while (!last) {
+ txb = skb_dequeue(&ks->txq);
+ last = skb_queue_empty(&ks->txq);
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
+ ks8851_wrpkt(ks, txb, last);
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+ ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+
+ ks8851_done_tx(ks, txb);
+ }
+
+ mutex_unlock(&ks->lock);
+}
+
+/**
+ * ks8851_set_powermode - set power mode of the device
+ * @ks: The device state
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode)
+{
+ unsigned pmecr;
+
+ if (netif_msg_hw(ks))
+ ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+ pmecr = ks8851_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_PM_MASK;
+ pmecr |= pwrmode;
+
+ ks8851_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks8851_net_open - open network device
+ * @dev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks8851_net_open(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ /* lock the card, even if we may not actually be doing anything
+ * else at the moment */
+ mutex_lock(&ks->lock);
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "opening %s\n", dev->name);
+
+ /* bring chip out of any power saving mode it was in */
+ ks8851_set_powermode(ks, PMECR_PM_NORMAL);
+
+ /* issue a soft reset to the RX/TX QMU to put it into a known
+ * state. */
+ ks8851_soft_reset(ks, GRR_QMU);
+
+ /* setup transmission parameters */
+
+ ks8851_wrreg16(ks, KS_TXCR, (TXCR_TXE | /* enable transmit process */
+ TXCR_TXPE | /* pad to min length */
+ TXCR_TXCRC | /* add CRC */
+ TXCR_TXFCE)); /* enable flow control */
+
+ /* auto-increment tx data, reset tx pointer */
+ ks8851_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+ /* setup receiver control */
+
+ ks8851_wrreg16(ks, KS_RXCR1, (RXCR1_RXPAFMA | /* from mac filter */
+ RXCR1_RXFCE | /* enable flow control */
+ RXCR1_RXBE | /* broadcast enable */
+ RXCR1_RXUE | /* unicast enable */
+ RXCR1_RXE)); /* enable rx block */
+
+ /* transfer entire frames out in one go */
+ ks8851_wrreg16(ks, KS_RXCR2, RXCR2_SRDBL_FRAME);
+
+ /* set receive counter timeouts */
+ ks8851_wrreg16(ks, KS_RXDTTR, 1000); /* 1ms after first frame to IRQ */
+ ks8851_wrreg16(ks, KS_RXDBCTR, 4096); /* >4Kbytes in buffer to IRQ */
+ ks8851_wrreg16(ks, KS_RXFCTR, 10); /* 10 frames to IRQ */
+
+ ks->rc_rxqcr = (RXQCR_RXFCTE | /* IRQ on frame count exceeded */
+ RXQCR_RXDBCTE | /* IRQ on byte count exceeded */
+ RXQCR_RXDTTE); /* IRQ on time exceeded */
+
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+ /* clear then enable interrupts */
+
+#define STD_IRQ (IRQ_LCI | /* Link Change */ \
+ IRQ_TXI | /* TX done */ \
+ IRQ_RXI | /* RX done */ \
+ IRQ_SPIBEI | /* SPI bus error */ \
+ IRQ_TXPSI | /* TX process stop */ \
+ IRQ_RXPSI) /* RX process stop */
+
+ ks->rc_ier = STD_IRQ;
+ ks8851_wrreg16(ks, KS_ISR, STD_IRQ);
+ ks8851_wrreg16(ks, KS_IER, STD_IRQ);
+
+ netif_start_queue(ks->netdev);
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "network device %s up\n", dev->name);
+
+ mutex_unlock(&ks->lock);
+ return 0;
+}
+
+/**
+ * ks8851_net_stop - close network device
+ * @dev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks8851_net_stop(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ if (netif_msg_ifdown(ks))
+ ks_info(ks, "%s: shutting down\n", dev->name);
+
+ netif_stop_queue(dev);
+
+ mutex_lock(&ks->lock);
+
+ /* stop any outstanding work */
+ flush_work(&ks->irq_work);
+ flush_work(&ks->tx_work);
+ flush_work(&ks->rxctrl_work);
+
+ /* turn off the IRQs and ack any outstanding */
+ ks8851_wrreg16(ks, KS_IER, 0x0000);
+ ks8851_wrreg16(ks, KS_ISR, 0xffff);
+
+ /* shutdown RX process */
+ ks8851_wrreg16(ks, KS_RXCR1, 0x0000);
+
+ /* shutdown TX process */
+ ks8851_wrreg16(ks, KS_TXCR, 0x0000);
+
+ /* set powermode to soft power down to save power */
+ ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+
+ /* ensure any queued tx buffers are dumped */
+ while (!skb_queue_empty(&ks->txq)) {
+ struct sk_buff *txb = skb_dequeue(&ks->txq);
+
+ if (netif_msg_ifdown(ks))
+ ks_dbg(ks, "%s: freeing txb %p\n", __func__, txb);
+
+ dev_kfree_skb(txb);
+ }
+
+ mutex_unlock(&ks->lock);
+ return 0;
+}
+
+/**
+ * ks8851_start_xmit - transmit packet
+ * @skb: The buffer to transmit
+ * @dev: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb. Queue the packet for
+ * the device and schedule the necessary work to transmit the packet when
+ * it is free.
+ *
+ * We do this to firstly avoid sleeping with the network device locked,
+ * and secondly so we can round up more than one packet to transmit which
+ * means we can try and avoid generating too many transmit done interrupts.
+ */
+static int ks8851_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ unsigned needed = calc_txlen(skb->len);
+ int ret = NETDEV_TX_OK;
+
+ if (netif_msg_tx_queued(ks))
+ ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__,
+ skb, skb->len, skb->data);
+
+ spin_lock(&ks->statelock);
+
+ if (needed > ks->tx_space) {
+ netif_stop_queue(dev);
+ ret = NETDEV_TX_BUSY;
+ } else {
+ ks->tx_space -= needed;
+ skb_queue_tail(&ks->txq, skb);
+ }
+
+ spin_unlock(&ks->statelock);
+ schedule_work(&ks->tx_work);
+
+ return ret;
+}
+
+/**
+ * ks8851_rxctrl_work - work handler to change rx mode
+ * @work: The work structure this belongs to.
+ *
+ * Lock the device and issue the necessary changes to the receive mode from
+ * the network device layer. This is done so that we can do this without
+ * having to sleep whilst holding the network device lock.
+ *
+ * Since the recommendation from Micrel is that the RXQ is shutdown whilst the
+ * receive parameters are programmed, we issue a write to disable the RXQ and
+ * then wait for the interrupt handler to be triggered once the RXQ shutdown is
+ * complete. The interrupt handler then writes the new values into the chip.
+ */
+static void ks8851_rxctrl_work(struct work_struct *work)
+{
+ struct ks8851_net *ks = container_of(work, struct ks8851_net, rxctrl_work);
+
+ mutex_lock(&ks->lock);
+
+ /* need to shutdown RXQ before modifying filter parameters */
+ ks8851_wrreg16(ks, KS_RXCR1, 0x00);
+
+ mutex_unlock(&ks->lock);
+}
+
+static void ks8851_set_rx_mode(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ struct ks8851_rxctrl rxctrl;
+
+ memset(&rxctrl, 0, sizeof(rxctrl));
+
+ if (dev->flags & IFF_PROMISC) {
+ /* interface to receive everything */
+
+ rxctrl.rxcr1 = RXCR1_RXAE | RXCR1_RXINVF;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ /* accept all multicast packets */
+
+ rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
+ RXCR1_RXPAFMA | RXCR1_RXMAFMA);
+ } else if (dev->flags & IFF_MULTICAST && dev->mc_count > 0) {
+ struct dev_mc_list *mcptr = dev->mc_list;
+ u32 crc;
+ int i;
+
+ /* accept some multicast */
+
+ for (i = dev->mc_count; i > 0; i--) {
+ crc = ether_crc(ETH_ALEN, mcptr->dmi_addr);
+ crc >>= (32 - 6); /* get top six bits */
+
+ rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf));
+ mcptr = mcptr->next;
+ }
+
+ rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA;
+ } else {
+ /* just accept broadcast / unicast */
+ rxctrl.rxcr1 = RXCR1_RXPAFMA;
+ }
+
+ rxctrl.rxcr1 |= (RXCR1_RXUE | /* unicast enable */
+ RXCR1_RXBE | /* broadcast enable */
+ RXCR1_RXE | /* RX process enable */
+ RXCR1_RXFCE); /* enable flow control */
+
+ rxctrl.rxcr2 |= RXCR2_SRDBL_FRAME;
+
+ /* schedule work to do the actual set of the data if needed */
+
+ spin_lock(&ks->statelock);
+
+ if (memcmp(&rxctrl, &ks->rxctrl, sizeof(rxctrl)) != 0) {
+ memcpy(&ks->rxctrl, &rxctrl, sizeof(ks->rxctrl));
+ schedule_work(&ks->rxctrl_work);
+ }
+
+ spin_unlock(&ks->statelock);
+}
+
+static int ks8851_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *sa = addr;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
+ return ks8851_write_mac_addr(dev);
+}
+
+static int ks8851_net_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks8851_netdev_ops = {
+ .ndo_open = ks8851_net_open,
+ .ndo_stop = ks8851_net_stop,
+ .ndo_do_ioctl = ks8851_net_ioctl,
+ .ndo_start_xmit = ks8851_start_xmit,
+ .ndo_set_mac_address = ks8851_set_mac_address,
+ .ndo_set_rx_mode = ks8851_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks8851_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *di)
+{
+ strlcpy(di->driver, "KS8851", sizeof(di->driver));
+ strlcpy(di->version, "1.00", sizeof(di->version));
+ strlcpy(di->bus_info, dev_name(dev->dev.parent), sizeof(di->bus_info));
+}
+
+static u32 ks8851_get_msglevel(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return ks->msg_enable;
+}
+
+static void ks8851_set_msglevel(struct net_device *dev, u32 to)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ ks->msg_enable = to;
+}
+
+static int ks8851_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks8851_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks8851_get_link(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_link_ok(&ks->mii);
+}
+
+static int ks8851_nway_reset(struct net_device *dev)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks8851_ethtool_ops = {
+ .get_drvinfo = ks8851_get_drvinfo,
+ .get_msglevel = ks8851_get_msglevel,
+ .set_msglevel = ks8851_set_msglevel,
+ .get_settings = ks8851_get_settings,
+ .set_settings = ks8851_set_settings,
+ .get_link = ks8851_get_link,
+ .nway_reset = ks8851_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks8851_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks8851_phy_reg(int reg)
+{
+ switch (reg) {
+ case MII_BMCR:
+ return KS_P1MBCR;
+ case MII_BMSR:
+ return KS_P1MBSR;
+ case MII_PHYSID1:
+ return KS_PHY1ILR;
+ case MII_PHYSID2:
+ return KS_PHY1IHR;
+ case MII_ADVERTISE:
+ return KS_P1ANAR;
+ case MII_LPA:
+ return KS_P1ANLPR;
+ }
+
+ return 0x0;
+}
+
+/**
+ * ks8851_phy_read - MII interface PHY register read.
+ * @dev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int ksreg;
+ int result;
+
+ ksreg = ks8851_phy_reg(reg);
+ if (!ksreg)
+ return 0x0; /* no error return allowed, so use zero */
+
+ mutex_lock(&ks->lock);
+ result = ks8851_rdreg16(ks, ksreg);
+ mutex_unlock(&ks->lock);
+
+ return result;
+}
+
+static void ks8851_phy_write(struct net_device *dev,
+ int phy, int reg, int value)
+{
+ struct ks8851_net *ks = netdev_priv(dev);
+ int ksreg;
+
+ ksreg = ks8851_phy_reg(reg);
+ if (ksreg) {
+ mutex_lock(&ks->lock);
+ ks8851_wrreg16(ks, ksreg, value);
+ mutex_unlock(&ks->lock);
+ }
+}
+
+/**
+ * ks8851_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks8851_read_selftest(struct ks8851_net *ks)
+{
+ unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+ int ret = 0;
+ unsigned rd;
+
+ rd = ks8851_rdreg16(ks, KS_MBIR);
+
+ if ((rd & both_done) != both_done) {
+ ks_warn(ks, "Memory selftest not finished\n");
+ return 0;
+ }
+
+ if (rd & MBIR_TXMBFA) {
+ ks_err(ks, "TX memory selftest fail\n");
+ ret |= 1;
+ }
+
+ if (rd & MBIR_RXMBFA) {
+ ks_err(ks, "RX memory selftest fail\n");
+ ret |= 2;
+ }
+
+ return 0;
+}
+
+/* driver bus management functions */
+
+static int __devinit ks8851_probe(struct spi_device *spi)
+{
+ struct net_device *ndev;
+ struct ks8851_net *ks;
+ int ret;
+
+ ndev = alloc_etherdev(sizeof(struct ks8851_net));
+ if (!ndev) {
+ dev_err(&spi->dev, "failed to alloc ethernet device\n");
+ return -ENOMEM;
+ }
+
+ spi->bits_per_word = 8;
+
+ ks = netdev_priv(ndev);
+
+ ks->netdev = ndev;
+ ks->spidev = spi;
+ ks->tx_space = 6144;
+
+ mutex_init(&ks->lock);
+ spin_lock_init(&ks->statelock);
+
+ INIT_WORK(&ks->tx_work, ks8851_tx_work);
+ INIT_WORK(&ks->irq_work, ks8851_irq_work);
+ INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
+
+ /* initialise pre-made spi transfer messages */
+
+ spi_message_init(&ks->spi_msg1);
+ spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1);
+
+ spi_message_init(&ks->spi_msg2);
+ spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2);
+ spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2);
+
+ /* setup mii state */
+ ks->mii.dev = ndev;
+ ks->mii.phy_id = 1,
+ ks->mii.phy_id_mask = 1;
+ ks->mii.reg_num_mask = 0xf;
+ ks->mii.mdio_read = ks8851_phy_read;
+ ks->mii.mdio_write = ks8851_phy_write;
+
+ dev_info(&spi->dev, "message enable is %d\n", msg_enable);
+
+ /* set the default message enable */
+ ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+ NETIF_MSG_PROBE |
+ NETIF_MSG_LINK));
+
+ skb_queue_head_init(&ks->txq);
+
+ SET_ETHTOOL_OPS(ndev, &ks8851_ethtool_ops);
+ SET_NETDEV_DEV(ndev, &spi->dev);
+
+ dev_set_drvdata(&spi->dev, ks);
+
+ ndev->if_port = IF_PORT_100BASET;
+ ndev->netdev_ops = &ks8851_netdev_ops;
+ ndev->irq = spi->irq;
+
+ /* simple check for a valid chip being connected to the bus */
+
+ if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+ dev_err(&spi->dev, "failed to read device ID\n");
+ ret = -ENODEV;
+ goto err_id;
+ }
+
+ ks8851_read_selftest(ks);
+ ks8851_init_mac(ks);
+
+ ret = request_irq(spi->irq, ks8851_irq, IRQF_TRIGGER_LOW,
+ ndev->name, ks);
+ if (ret < 0) {
+ dev_err(&spi->dev, "failed to get irq\n");
+ goto err_irq;
+ }
+
+ ret = register_netdev(ndev);
+ if (ret) {
+ dev_err(&spi->dev, "failed to register network device\n");
+ goto err_netdev;
+ }
+
+ dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n",
+ CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
+ ndev->dev_addr, ndev->irq);
+
+ return 0;
+
+
+err_netdev:
+ free_irq(ndev->irq, ndev);
+
+err_id:
+err_irq:
+ free_netdev(ndev);
+ return ret;
+}
+
+static int __devexit ks8851_remove(struct spi_device *spi)
+{
+ struct ks8851_net *priv = dev_get_drvdata(&spi->dev);
+
+ if (netif_msg_drv(priv))
+ dev_info(&spi->dev, "remove");
+
+ unregister_netdev(priv->netdev);
+ free_irq(spi->irq, priv);
+ free_netdev(priv->netdev);
+
+ return 0;
+}
+
+static struct spi_driver ks8851_driver = {
+ .driver = {
+ .name = "ks8851",
+ .owner = THIS_MODULE,
+ },
+ .probe = ks8851_probe,
+ .remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+ return spi_register_driver(&ks8851_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+ spi_unregister_driver(&ks8851_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 Network driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h
new file mode 100644
index 0000000..85abe14
--- /dev/null
+++ b/drivers/net/ks8851.h
@@ -0,0 +1,296 @@
+/* drivers/net/ks8851.h
+ *
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8851 register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define KS_CCR 0x08
+#define CCR_EEPROM (1 << 9)
+#define CCR_SPI (1 << 8)
+#define CCR_32PIN (1 << 0)
+
+/* MAC address registers */
+#define KS_MARL 0x10
+#define KS_MARM 0x12
+#define KS_MARH 0x14
+
+#define KS_OBCR 0x20
+#define OBCR_ODS_16mA (1 << 6)
+
+#define KS_EEPCR 0x22
+#define EEPCR_EESA (1 << 4)
+#define EEPCR_EESB (1 << 3)
+#define EEPCR_EEDO (1 << 2)
+#define EEPCR_EESCK (1 << 1)
+#define EEPCR_EECS (1 << 0)
+
+#define KS_MBIR 0x24
+#define MBIR_TXMBF (1 << 12)
+#define MBIR_TXMBFA (1 << 11)
+#define MBIR_RXMBF (1 << 4)
+#define MBIR_RXMBFA (1 << 3)
+
+#define KS_GRR 0x26
+#define GRR_QMU (1 << 1)
+#define GRR_GSR (1 << 0)
+
+#define KS_WFCR 0x2A
+#define WFCR_MPRXE (1 << 7)
+#define WFCR_WF3E (1 << 3)
+#define WFCR_WF2E (1 << 2)
+#define WFCR_WF1E (1 << 1)
+#define WFCR_WF0E (1 << 0)
+
+#define KS_WF0CRC0 0x30
+#define KS_WF0CRC1 0x32
+#define KS_WF0BM0 0x34
+#define KS_WF0BM1 0x36
+#define KS_WF0BM2 0x38
+#define KS_WF0BM3 0x3A
+
+#define KS_WF1CRC0 0x40
+#define KS_WF1CRC1 0x42
+#define KS_WF1BM0 0x44
+#define KS_WF1BM1 0x46
+#define KS_WF1BM2 0x48
+#define KS_WF1BM3 0x4A
+
+#define KS_WF2CRC0 0x50
+#define KS_WF2CRC1 0x52
+#define KS_WF2BM0 0x54
+#define KS_WF2BM1 0x56
+#define KS_WF2BM2 0x58
+#define KS_WF2BM3 0x5A
+
+#define KS_WF3CRC0 0x60
+#define KS_WF3CRC1 0x62
+#define KS_WF3BM0 0x64
+#define KS_WF3BM1 0x66
+#define KS_WF3BM2 0x68
+#define KS_WF3BM3 0x6A
+
+#define KS_TXCR 0x70
+#define TXCR_TCGICMP (1 << 8)
+#define TXCR_TCGUDP (1 << 7)
+#define TXCR_TCGTCP (1 << 6)
+#define TXCR_TCGIP (1 << 5)
+#define TXCR_FTXQ (1 << 4)
+#define TXCR_TXFCE (1 << 3)
+#define TXCR_TXPE (1 << 2)
+#define TXCR_TXCRC (1 << 1)
+#define TXCR_TXE (1 << 0)
+
+#define KS_TXSR 0x72
+#define TXSR_TXLC (1 << 13)
+#define TXSR_TXMC (1 << 12)
+#define TXSR_TXFID_MASK (0x3f << 0)
+#define TXSR_TXFID_SHIFT (0)
+#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f)
+
+#define KS_RXCR1 0x74
+#define RXCR1_FRXQ (1 << 15)
+#define RXCR1_RXUDPFCC (1 << 14)
+#define RXCR1_RXTCPFCC (1 << 13)
+#define RXCR1_RXIPFCC (1 << 12)
+#define RXCR1_RXPAFMA (1 << 11)
+#define RXCR1_RXFCE (1 << 10)
+#define RXCR1_RXEFE (1 << 9)
+#define RXCR1_RXMAFMA (1 << 8)
+#define RXCR1_RXBE (1 << 7)
+#define RXCR1_RXME (1 << 6)
+#define RXCR1_RXUE (1 << 5)
+#define RXCR1_RXAE (1 << 4)
+#define RXCR1_RXINVF (1 << 1)
+#define RXCR1_RXE (1 << 0)
+
+#define KS_RXCR2 0x76
+#define RXCR2_SRDBL_MASK (0x7 << 5)
+#define RXCR2_SRDBL_SHIFT (5)
+#define RXCR2_SRDBL_4B (0x0 << 5)
+#define RXCR2_SRDBL_8B (0x1 << 5)
+#define RXCR2_SRDBL_16B (0x2 << 5)
+#define RXCR2_SRDBL_32B (0x3 << 5)
+#define RXCR2_SRDBL_FRAME (0x4 << 5)
+#define RXCR2_IUFFP (1 << 4)
+#define RXCR2_RXIUFCEZ (1 << 3)
+#define RXCR2_UDPLFE (1 << 2)
+#define RXCR2_RXICMPFCC (1 << 1)
+#define RXCR2_RXSAF (1 << 0)
+
+#define KS_TXMIR 0x78
+
+#define KS_RXFHSR 0x7C
+#define RXFSHR_RXFV (1 << 15)
+#define RXFSHR_RXICMPFCS (1 << 13)
+#define RXFSHR_RXIPFCS (1 << 12)
+#define RXFSHR_RXTCPFCS (1 << 11)
+#define RXFSHR_RXUDPFCS (1 << 10)
+#define RXFSHR_RXBF (1 << 7)
+#define RXFSHR_RXMF (1 << 6)
+#define RXFSHR_RXUF (1 << 5)
+#define RXFSHR_RXMR (1 << 4)
+#define RXFSHR_RXFT (1 << 3)
+#define RXFSHR_RXFTL (1 << 2)
+#define RXFSHR_RXRF (1 << 1)
+#define RXFSHR_RXCE (1 << 0)
+
+#define KS_RXFHBCR 0x7E
+#define KS_TXQCR 0x80
+#define TXQCR_AETFE (1 << 2)
+#define TXQCR_TXQMAM (1 << 1)
+#define TXQCR_METFE (1 << 0)
+
+#define KS_RXQCR 0x82
+#define RXQCR_RXDTTS (1 << 12)
+#define RXQCR_RXDBCTS (1 << 11)
+#define RXQCR_RXFCTS (1 << 10)
+#define RXQCR_RXIPHTOE (1 << 9)
+#define RXQCR_RXDTTE (1 << 7)
+#define RXQCR_RXDBCTE (1 << 6)
+#define RXQCR_RXFCTE (1 << 5)
+#define RXQCR_ADRFE (1 << 4)
+#define RXQCR_SDA (1 << 3)
+#define RXQCR_RRXEF (1 << 0)
+
+#define KS_TXFDPR 0x84
+#define TXFDPR_TXFPAI (1 << 14)
+#define TXFDPR_TXFP_MASK (0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT (0)
+
+#define KS_RXFDPR 0x86
+#define RXFDPR_RXFPAI (1 << 14)
+
+#define KS_RXDTTR 0x8C
+#define KS_RXDBCTR 0x8E
+
+#define KS_IER 0x90
+#define KS_ISR 0x92
+#define IRQ_LCI (1 << 15)
+#define IRQ_TXI (1 << 14)
+#define IRQ_RXI (1 << 13)
+#define IRQ_RXOI (1 << 11)
+#define IRQ_TXPSI (1 << 9)
+#define IRQ_RXPSI (1 << 8)
+#define IRQ_TXSAI (1 << 6)
+#define IRQ_RXWFDI (1 << 5)
+#define IRQ_RXMPDI (1 << 4)
+#define IRQ_LDI (1 << 3)
+#define IRQ_EDI (1 << 2)
+#define IRQ_SPIBEI (1 << 1)
+#define IRQ_DEDI (1 << 0)
+
+#define KS_RXFCTR 0x9C
+#define KS_RXFC 0x9D
+#define RXFCTR_RXFC_MASK (0xff << 8)
+#define RXFCTR_RXFC_SHIFT (8)
+#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK (0xff << 0)
+#define RXFCTR_RXFCT_SHIFT (0)
+
+#define KS_TXNTFSR 0x9E
+
+#define KS_MAHTR0 0xA0
+#define KS_MAHTR1 0xA2
+#define KS_MAHTR2 0xA4
+#define KS_MAHTR3 0xA6
+
+#define KS_FCLWR 0xB0
+#define KS_FCHWR 0xB2
+#define KS_FCOWR 0xB4
+
+#define KS_CIDER 0xC0
+#define CIDER_ID 0x8870
+#define CIDER_REV_MASK (0x7 << 1)
+#define CIDER_REV_SHIFT (1)
+#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7)
+
+#define KS_CGCR 0xC6
+
+#define KS_IACR 0xC8
+#define IACR_RDEN (1 << 12)
+#define IACR_TSEL_MASK (0x3 << 10)
+#define IACR_TSEL_SHIFT (10)
+#define IACR_TSEL_MIB (0x3 << 10)
+#define IACR_ADDR_MASK (0x1f << 0)
+#define IACR_ADDR_SHIFT (0)
+
+#define KS_IADLR 0xD0
+#define KS_IAHDR 0xD2
+
+#define KS_PMECR 0xD4
+#define PMECR_PME_DELAY (1 << 14)
+#define PMECR_PME_POL (1 << 12)
+#define PMECR_WOL_WAKEUP (1 << 11)
+#define PMECR_WOL_MAGICPKT (1 << 10)
+#define PMECR_WOL_LINKUP (1 << 9)
+#define PMECR_WOL_ENERGY (1 << 8)
+#define PMECR_AUTO_WAKE_EN (1 << 7)
+#define PMECR_WAKEUP_NORMAL (1 << 6)
+#define PMECR_WKEVT_MASK (0xf << 2)
+#define PMECR_WKEVT_SHIFT (2)
+#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY (0x1 << 2)
+#define PMECR_WKEVT_LINK (0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT (0x4 << 2)
+#define PMECR_WKEVT_FRAME (0x8 << 2)
+#define PMECR_PM_MASK (0x3 << 0)
+#define PMECR_PM_SHIFT (0)
+#define PMECR_PM_NORMAL (0x0 << 0)
+#define PMECR_PM_ENERGY (0x1 << 0)
+#define PMECR_PM_SOFTDOWN (0x2 << 0)
+#define PMECR_PM_POWERSAVE (0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR 0xE4
+#define KS_P1MBSR 0xE6
+#define KS_PHY1ILR 0xE8
+#define KS_PHY1IHR 0xEA
+#define KS_P1ANAR 0xEC
+#define KS_P1ANLPR 0xEE
+
+#define KS_P1SCLMD 0xF4
+#define P1SCLMD_LEDOFF (1 << 15)
+#define P1SCLMD_TXIDS (1 << 14)
+#define P1SCLMD_RESTARTAN (1 << 13)
+#define P1SCLMD_DISAUTOMDIX (1 << 10)
+#define P1SCLMD_FORCEMDIX (1 << 9)
+#define P1SCLMD_AUTONEGEN (1 << 7)
+#define P1SCLMD_FORCE100 (1 << 6)
+#define P1SCLMD_FORCEFDX (1 << 5)
+#define P1SCLMD_ADV_FLOW (1 << 4)
+#define P1SCLMD_ADV_100BT_FDX (1 << 3)
+#define P1SCLMD_ADV_100BT_HDX (1 << 2)
+#define P1SCLMD_ADV_10BT_FDX (1 << 1)
+#define P1SCLMD_ADV_10BT_HDX (1 << 0)
+
+#define KS_P1CR 0xF6
+#define P1CR_HP_MDIX (1 << 15)
+#define P1CR_REV_POL (1 << 13)
+#define P1CR_OP_100M (1 << 10)
+#define P1CR_OP_FDX (1 << 9)
+#define P1CR_OP_MDI (1 << 7)
+#define P1CR_AN_DONE (1 << 6)
+#define P1CR_LINK_GOOD (1 << 5)
+#define P1CR_PNTR_FLOW (1 << 4)
+#define P1CR_PNTR_100BT_FDX (1 << 3)
+#define P1CR_PNTR_100BT_HDX (1 << 2)
+#define P1CR_PNTR_10BT_FDX (1 << 1)
+#define P1CR_PNTR_10BT_HDX (1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC (1 << 15)
+#define TXFR_TXFID_MASK (0x3f << 0)
+#define TXFR_TXFID_SHIFT (0)
+
+/* SPI frame opcodes */
+#define KS_SPIOP_RD (0x00)
+#define KS_SPIOP_WR (0x40)
+#define KS_SPIOP_RXFIFO (0x80)
+#define KS_SPIOP_TXFIFO (0xC0)
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index acd143d..61eabca 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -179,7 +179,7 @@
.ndo_set_mac_address = eth_mac_addr,
};
-static int __init macsonic_init(struct net_device *dev)
+static int __devinit macsonic_init(struct net_device *dev)
{
struct sonic_local* lp = netdev_priv(dev);
@@ -223,7 +223,7 @@
return 0;
}
-static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
{
struct sonic_local *lp = netdev_priv(dev);
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
@@ -288,7 +288,7 @@
} else return 0;
}
-static int __init mac_onboard_sonic_probe(struct net_device *dev)
+static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
{
/* Bwahahaha */
static int once_is_more_than_enough;
@@ -409,7 +409,7 @@
return macsonic_init(dev);
}
-static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev,
+static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev,
unsigned long prom_addr,
int id)
{
@@ -424,7 +424,7 @@
return 0;
}
-static int __init macsonic_ident(struct nubus_dev *ndev)
+static int __devinit macsonic_ident(struct nubus_dev *ndev)
{
if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
@@ -449,7 +449,7 @@
return -1;
}
-static int __init mac_nubus_sonic_probe(struct net_device *dev)
+static int __devinit mac_nubus_sonic_probe(struct net_device *dev)
{
static int slots;
struct nubus_dev* ndev = NULL;
@@ -562,7 +562,7 @@
return macsonic_init(dev);
}
-static int __init mac_sonic_probe(struct platform_device *pdev)
+static int __devinit mac_sonic_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct sonic_local *lp;
@@ -575,6 +575,7 @@
lp = netdev_priv(dev);
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
/* This will catch fatal stuff like -ENOMEM as well as success */
err = mac_onboard_sonic_probe(dev);
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index dc45e98..6851bdb 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -14,6 +14,10 @@
#include <linux/mdio.h>
#include <linux/module.h>
+MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
+MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
+MODULE_LICENSE("GPL");
+
/**
* mdio45_probe - probe for an MDIO (clause 45) device
* @mdio: MDIO interface
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index 2845a05..65ec77d 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -80,7 +80,9 @@
/* Bad management packet (silently discarded): */
CMD_STAT_BAD_PKT = 0x30,
/* More outstanding CQEs in CQ than new CQ size: */
- CMD_STAT_BAD_SIZE = 0x40
+ CMD_STAT_BAD_SIZE = 0x40,
+ /* Multi Function device support required: */
+ CMD_STAT_MULTI_FUNC_REQ = 0x50,
};
enum {
@@ -128,6 +130,7 @@
[CMD_STAT_LAM_NOT_PRE] = -EAGAIN,
[CMD_STAT_BAD_PKT] = -EINVAL,
[CMD_STAT_BAD_SIZE] = -ENOMEM,
+ [CMD_STAT_MULTI_FUNC_REQ] = -EACCES,
};
if (status >= ARRAY_SIZE(trans_table) ||
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index 091f990..86467b4 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -220,7 +220,7 @@
{
cmd->autoneg = AUTONEG_DISABLE;
cmd->supported = SUPPORTED_10000baseT_Full;
- cmd->advertising = SUPPORTED_10000baseT_Full;
+ cmd->advertising = ADVERTISED_1000baseT_Full;
if (netif_carrier_ok(dev)) {
cmd->speed = SPEED_10000;
cmd->duplex = DUPLEX_FULL;
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 08c43f2..5a88b3f5 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -249,6 +249,7 @@
pci_unmap_page(mdev->pdev,
(dma_addr_t) be64_to_cpu(data->addr),
frag->size, PCI_DMA_TODEVICE);
+ ++data;
}
}
/* Stamp the freed descriptor */
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 018348c..dac621b 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -729,7 +729,10 @@
err = mlx4_QUERY_FW(dev);
if (err) {
- mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
+ if (err == -EACCES)
+ mlx4_info(dev, "non-primary physical function, skipping.\n");
+ else
+ mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
return err;
}
@@ -1285,6 +1288,7 @@
{ PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */
{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
+ { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
{ 0, }
};
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index c9bfe4e..78c0883 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -130,8 +130,8 @@
static const char version[] __devinitconst =
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
- KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+ " originally by Donald Becker <becker@scyld.com>\n"
+ " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 5c3e242..992dbff 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -321,7 +321,7 @@
}
if (ei_debug && version_printed++ == 0)
- printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
+ printk(KERN_INFO "%s%s", version1, version2);
printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 970cede..f86e050 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -60,7 +60,18 @@
#define _NETXEN_NIC_LINUX_SUBVERSION 30
#define NETXEN_NIC_LINUX_VERSIONID "4.0.30"
-#define NETXEN_VERSION_CODE(a, b, c) (((a) << 16) + ((b) << 8) + (c))
+#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
+#define _major(v) (((v) >> 24) & 0xff)
+#define _minor(v) (((v) >> 16) & 0xff)
+#define _build(v) ((v) & 0xffff)
+
+/* version in image has weird encoding:
+ * 7:0 - major
+ * 15:8 - minor
+ * 31:16 - build (little endian)
+ */
+#define NETXEN_DECODE_VERSION(v) \
+ NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
#define NETXEN_NUM_FLASH_SECTORS (64)
#define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
@@ -199,6 +210,7 @@
#define NETXEN_CTX_SIGNATURE 0xdee0
#define NETXEN_CTX_SIGNATURE_V2 0x0002dee0
#define NETXEN_CTX_RESET 0xbad0
+#define NETXEN_CTX_D3_RESET 0xacc0
#define NETXEN_RCV_PRODUCER(ringid) (ringid)
#define PHAN_PEG_RCV_INITIALIZED 0xff01
@@ -614,6 +626,7 @@
#define NX_P2_MN_ROMIMAGE 0
#define NX_P3_CT_ROMIMAGE 1
#define NX_P3_MN_ROMIMAGE 2
+#define NX_FLASH_ROMIMAGE 3
#define NETXEN_USER_START_OLD NETXEN_PXE_START /* for backward compatibility */
@@ -761,6 +774,8 @@
u32 crb_cmd_consumer;
u32 num_desc;
+ struct netdev_queue *txq;
+
struct netxen_cmd_buffer *cmd_buf_arr;
struct cmd_desc_type0 *desc_head;
dma_addr_t phys_addr;
@@ -1243,7 +1258,7 @@
u32 resv3;
u8 has_link_events;
- u8 resv1;
+ u8 fw_type;
u16 tx_context_id;
u16 mtu;
u16 is_up;
@@ -1387,6 +1402,7 @@
int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
int netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_need_fw_reset(struct netxen_adapter *adapter);
void netxen_request_firmware(struct netxen_adapter *adapter);
void netxen_release_firmware(struct netxen_adapter *adapter);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 4754f5c..9f8ae47 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -684,10 +684,8 @@
goto err_out_free;
} else {
err = netxen_init_old_ctx(adapter);
- if (err) {
- netxen_free_hw_resources(adapter);
- return err;
- }
+ if (err)
+ goto err_out_free;
}
return 0;
@@ -708,15 +706,18 @@
int port = adapter->portnum;
if (adapter->fw_major >= 4) {
- nx_fw_cmd_destroy_tx_ctx(adapter);
nx_fw_cmd_destroy_rx_ctx(adapter);
+ nx_fw_cmd_destroy_tx_ctx(adapter);
} else {
netxen_api_lock(adapter);
NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
- NETXEN_CTX_RESET | port);
+ NETXEN_CTX_D3_RESET | port);
netxen_api_unlock(adapter);
}
+ /* Allow dma queues to drain after context reset */
+ msleep(20);
+
recv_ctx = &adapter->recv_ctx;
if (recv_ctx->hwctx != NULL) {
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3cc0478..8241036 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -853,6 +853,7 @@
#define NX_PEG_TUNE_CAPABILITY (NETXEN_CAM_RAM(0x02c))
#define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14)
+#define NETXEN_PEG_ALIVE_COUNTER (NETXEN_CAM_RAM(0xb0))
#define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
#define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index ce3b89d..b9123d4 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -461,13 +461,14 @@
i = 0;
tx_ring = adapter->tx_ring;
- netif_tx_lock_bh(adapter->netdev);
+ __netif_tx_lock_bh(tx_ring->txq);
producer = tx_ring->producer;
consumer = tx_ring->sw_consumer;
- if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) {
- netif_tx_unlock_bh(adapter->netdev);
+ if (nr_desc >= netxen_tx_avail(tx_ring)) {
+ netif_tx_stop_queue(tx_ring->txq);
+ __netif_tx_unlock_bh(tx_ring->txq);
return -EBUSY;
}
@@ -490,7 +491,7 @@
netxen_nic_update_cmd_producer(adapter, tx_ring);
- netif_tx_unlock_bh(adapter->netdev);
+ __netif_tx_unlock_bh(tx_ring->txq);
return 0;
}
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 055bb61..7acf204 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -184,6 +184,13 @@
kfree(recv_ctx->rds_rings);
skip_rds:
+ if (recv_ctx->sds_rings == NULL)
+ goto skip_sds;
+
+ for(ring = 0; ring < adapter->max_sds_rings; ring++)
+ recv_ctx->sds_rings[ring].consumer = 0;
+
+skip_sds:
if (adapter->tx_ring == NULL)
return;
@@ -214,6 +221,7 @@
adapter->tx_ring = tx_ring;
tx_ring->num_desc = adapter->num_txd;
+ tx_ring->txq = netdev_get_tx_queue(netdev, 0);
cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
if (cmd_buf_arr == NULL) {
@@ -684,11 +692,84 @@
}
int
+netxen_need_fw_reset(struct netxen_adapter *adapter)
+{
+ u32 count, old_count;
+ u32 val, version, major, minor, build;
+ int i, timeout;
+ u8 fw_type;
+
+ /* NX2031 firmware doesn't support heartbit */
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 1;
+
+ /* last attempt had failed */
+ if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+ return 1;
+
+ old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+
+ for (i = 0; i < 10; i++) {
+
+ timeout = msleep_interruptible(200);
+ if (timeout) {
+ NXWR32(adapter, CRB_CMDPEG_STATE,
+ PHAN_INITIALIZE_FAILED);
+ return -EINTR;
+ }
+
+ count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ if (count != old_count)
+ break;
+ }
+
+ /* firmware is dead */
+ if (count == old_count)
+ return 1;
+
+ /* check if we have got newer or different file firmware */
+ if (adapter->fw) {
+
+ const struct firmware *fw = adapter->fw;
+
+ val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+ version = NETXEN_DECODE_VERSION(val);
+
+ major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+ minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+ build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+ if (version > NETXEN_VERSION_CODE(major, minor, build))
+ return 1;
+
+ if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+
+ val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
+ fw_type = (val & 0x4) ?
+ NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE;
+
+ if (adapter->fw_type != fw_type)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static char *fw_name[] = {
+ "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+};
+
+int
netxen_load_firmware(struct netxen_adapter *adapter)
{
u64 *ptr64;
u32 i, flashaddr, size;
const struct firmware *fw = adapter->fw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ dev_info(&pdev->dev, "loading firmware from %s\n",
+ fw_name[adapter->fw_type]);
if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
@@ -756,7 +837,7 @@
netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
{
__le32 val;
- u32 major, minor, build, ver, min_ver, bios;
+ u32 ver, min_ver, bios;
struct pci_dev *pdev = adapter->pdev;
const struct firmware *fw = adapter->fw;
@@ -768,21 +849,18 @@
return -EINVAL;
val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
- major = (__force u32)val & 0xff;
- minor = ((__force u32)val >> 8) & 0xff;
- build = (__force u32)val >> 16;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
min_ver = NETXEN_VERSION_CODE(4, 0, 216);
else
min_ver = NETXEN_VERSION_CODE(3, 4, 216);
- ver = NETXEN_VERSION_CODE(major, minor, build);
+ ver = NETXEN_DECODE_VERSION(val);
- if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+ if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
dev_err(&pdev->dev,
"%s: firmware version %d.%d.%d unsupported\n",
- fwname, major, minor, build);
+ fwname, _major(ver), _minor(ver), _build(ver));
return -EINVAL;
}
@@ -798,22 +876,21 @@
if (netxen_rom_fast_read(adapter,
NX_FW_VERSION_OFFSET, (int *)&val))
return -EIO;
- major = (__force u32)val & 0xff;
- minor = ((__force u32)val >> 8) & 0xff;
- build = (__force u32)val >> 16;
- if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+ val = NETXEN_DECODE_VERSION(val);
+ if (val > ver) {
+ dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+ fwname);
return -EINVAL;
+ }
NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
return 0;
}
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
void netxen_request_firmware(struct netxen_adapter *adapter)
{
u32 capability, flashed_ver;
- int fw_type;
+ u8 fw_type;
struct pci_dev *pdev = adapter->pdev;
int rc = 0;
@@ -830,6 +907,8 @@
netxen_rom_fast_read(adapter,
NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+ flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
+
if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
if (capability & NX_PEG_TUNE_MN_PRESENT) {
@@ -838,6 +917,10 @@
}
}
+ fw_type = NX_FLASH_ROMIMAGE;
+ adapter->fw = NULL;
+ goto done;
+
request_fw:
rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
if (rc != 0) {
@@ -846,6 +929,7 @@
goto request_mn;
}
+ fw_type = NX_FLASH_ROMIMAGE;
adapter->fw = NULL;
goto done;
}
@@ -859,16 +943,13 @@
goto request_mn;
}
+ fw_type = NX_FLASH_ROMIMAGE;
adapter->fw = NULL;
goto done;
}
done:
- if (adapter->fw)
- dev_info(&pdev->dev, "loading firmware from file %s\n",
- fw_name[fw_type]);
- else
- dev_info(&pdev->dev, "loading firmware from flash\n");
+ adapter->fw_type = fw_type;
}
@@ -1327,10 +1408,10 @@
smp_mb();
if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
- netif_tx_lock(netdev);
+ __netif_tx_lock(tx_ring->txq, smp_processor_id());
if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
netif_wake_queue(netdev);
- netif_tx_unlock(netdev);
+ __netif_tx_unlock(tx_ring->txq);
}
}
/*
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2919a2d..3cd8cfc 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -215,13 +215,13 @@
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &recv_ctx->sds_rings[ring];
- napi_disable(&sds_ring->napi);
netxen_nic_disable_int(sds_ring);
- synchronize_irq(sds_ring->irq);
+ napi_synchronize(&sds_ring->napi);
+ napi_disable(&sds_ring->napi);
}
}
-static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
+static int nx_set_dma_mask(struct netxen_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
uint64_t mask, cmask;
@@ -229,19 +229,17 @@
adapter->pci_using_dac = 0;
mask = DMA_BIT_MASK(32);
- /*
- * Consistent DMA mask is set to 32 bit because it cannot be set to
- * 35 bits. For P3 also leave it at 32 bits for now. Only the rings
- * come off this pool.
- */
cmask = DMA_BIT_MASK(32);
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
#ifndef CONFIG_IA64
- if (revision_id >= NX_P3_B0)
- mask = DMA_BIT_MASK(39);
- else if (revision_id == NX_P2_C1)
mask = DMA_BIT_MASK(35);
#endif
+ } else {
+ mask = DMA_BIT_MASK(39);
+ cmask = mask;
+ }
+
if (pci_set_dma_mask(pdev, mask) == 0 &&
pci_set_consistent_dma_mask(pdev, cmask) == 0) {
adapter->pci_using_dac = 1;
@@ -256,7 +254,7 @@
nx_update_dma_mask(struct netxen_adapter *adapter)
{
int change, shift, err;
- uint64_t mask, old_mask;
+ uint64_t mask, old_mask, old_cmask;
struct pci_dev *pdev = adapter->pdev;
change = 0;
@@ -272,14 +270,29 @@
if (change) {
old_mask = pdev->dma_mask;
+ old_cmask = pdev->dev.coherent_dma_mask;
+
mask = (1ULL<<(32+shift)) - 1;
err = pci_set_dma_mask(pdev, mask);
if (err)
- return pci_set_dma_mask(pdev, old_mask);
+ goto err_out;
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+ err = pci_set_consistent_dma_mask(pdev, mask);
+ if (err)
+ goto err_out;
+ }
+ dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
}
return 0;
+
+err_out:
+ pci_set_dma_mask(pdev, old_mask);
+ pci_set_consistent_dma_mask(pdev, old_cmask);
+ return err;
}
static void netxen_check_options(struct netxen_adapter *adapter)
@@ -718,6 +731,10 @@
if (request_fw)
netxen_request_firmware(adapter);
+ err = netxen_need_fw_reset(adapter);
+ if (err <= 0)
+ return err;
+
if (first_boot != 0x55555555) {
NXWR32(adapter, CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
@@ -829,11 +846,11 @@
adapter->ahw.linkup = 0;
- netxen_napi_enable(adapter);
-
if (adapter->max_sds_rings > 1)
netxen_config_rss(adapter, 1);
+ netxen_napi_enable(adapter);
+
if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
netxen_linkevent_request(adapter, 1);
else
@@ -847,8 +864,9 @@
static void
netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
{
+ spin_lock(&adapter->tx_clean_lock);
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
+ netif_tx_disable(netdev);
if (adapter->stop_port)
adapter->stop_port(adapter);
@@ -859,9 +877,10 @@
netxen_napi_disable(adapter);
netxen_release_tx_buffers(adapter);
+ spin_unlock(&adapter->tx_clean_lock);
- FLUSH_SCHEDULED_WORK();
del_timer_sync(&adapter->watchdog_timer);
+ FLUSH_SCHEDULED_WORK();
}
@@ -939,8 +958,8 @@
static void
netxen_nic_detach(struct netxen_adapter *adapter)
{
- netxen_release_rx_buffers(adapter);
netxen_free_hw_resources(adapter);
+ netxen_release_rx_buffers(adapter);
netxen_nic_free_irq(adapter);
netxen_free_sw_resources(adapter);
@@ -1000,7 +1019,7 @@
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
- err = nx_set_dma_mask(adapter, revision_id);
+ err = nx_set_dma_mask(adapter);
if (err)
goto err_out_free_netdev;
@@ -1529,10 +1548,12 @@
printk(KERN_ALERT
"%s: Device temperature %d degrees C exceeds"
" maximum allowed. Hardware has been shut down.\n",
- netxen_nic_driver_name, temp_val);
+ netdev->name, temp_val);
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
+ netif_device_detach(netdev);
+ netxen_nic_down(adapter, netdev);
+ netxen_nic_detach(adapter);
+
rv = 1;
} else if (temp_state == NX_TEMP_WARN) {
if (adapter->temp == NX_TEMP_NORMAL) {
@@ -1540,13 +1561,13 @@
"%s: Device temperature %d degrees C "
"exceeds operating range."
" Immediate action needed.\n",
- netxen_nic_driver_name, temp_val);
+ netdev->name, temp_val);
}
} else {
if (adapter->temp == NX_TEMP_WARN) {
printk(KERN_INFO
"%s: Device temperature is now %d degrees C"
- " in normal range.\n", netxen_nic_driver_name,
+ " in normal range.\n", netdev->name,
temp_val);
}
}
@@ -1619,7 +1640,7 @@
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, watchdog_task);
- if ((adapter->portnum == 0) && netxen_nic_check_temp(adapter))
+ if (netxen_nic_check_temp(adapter))
return;
if (!adapter->has_link_events)
@@ -1641,6 +1662,9 @@
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, tx_timeout_task);
+ if (!netif_running(adapter->netdev))
+ return;
+
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
netxen_nic_driver_name, adapter->netdev->name);
@@ -1753,7 +1777,8 @@
if ((work_done < budget) && tx_complete) {
napi_complete(&sds_ring->napi);
- netxen_nic_enable_int(sds_ring);
+ if (netif_running(adapter->netdev))
+ netxen_nic_enable_int(sds_ring);
}
return work_done;
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 8c1f698..89f7b2a 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -105,7 +105,7 @@
static char version[] __devinitdata =
KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-KERN_INFO " Support available from http://foo.com/bar/baz.html\n";
+" Support available from http://foo.com/bar/baz.html\n";
/* define to 1 to enable PIO instead of MMIO */
#undef USE_IO_OPS
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ec7cf5a..690b9c7 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -156,6 +156,7 @@
static int el3_rx(struct net_device *dev);
static int el3_close(struct net_device *dev);
static void el3_tx_timeout(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static const struct ethtool_ops netdev_ethtool_ops;
@@ -488,8 +489,7 @@
/* Switch to register set 1 for normal use. */
EL3WINDOW(1);
- /* Accept b-cast and phys addr only. */
- outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+ set_rx_mode(dev);
outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
@@ -700,7 +700,7 @@
if (fifo_diag & 0x2000) {
/* Rx underrun */
tc589_wait_for_completion(dev, RxReset);
- set_multicast_list(dev);
+ set_rx_mode(dev);
outw(RxEnable, ioaddr + EL3_CMD);
}
outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
@@ -905,14 +905,11 @@
return 0;
}
-static void set_multicast_list(struct net_device *dev)
+static void set_rx_mode(struct net_device *dev)
{
- struct el3_private *lp = netdev_priv(dev);
- struct pcmcia_device *link = lp->p_dev;
unsigned int ioaddr = dev->base_addr;
u16 opts = SetRxFilter | RxStation | RxBroadcast;
- if (!pcmcia_dev_present(link)) return;
if (dev->flags & IFF_PROMISC)
opts |= RxMulticast | RxProm;
else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
@@ -920,6 +917,16 @@
outw(opts, ioaddr + EL3_CMD);
}
+static void set_multicast_list(struct net_device *dev)
+{
+ struct el3_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ set_rx_mode(dev);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
static int el3_close(struct net_device *dev)
{
struct el3_private *lp = netdev_priv(dev);
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index f51944b..06618af 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -298,14 +298,11 @@
strcpy(info->node.dev_name, dev->name);
- printk(KERN_INFO "%s: port %#3lx, irq %d,",
- dev->name, dev->base_addr, dev->irq);
- printk (" mmio %#5lx,", (u_long)ti->mmio);
- printk (" sram %#5lx,", (u_long)ti->sram_base << 12);
- printk ("\n" KERN_INFO " hwaddr=");
- for (i = 0; i < TR_ALEN; i++)
- printk("%02X", dev->dev_addr[i]);
- printk("\n");
+ printk(KERN_INFO
+ "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
+ dev->name, dev->base_addr, dev->irq,
+ (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
+ dev->dev_addr);
return 0;
cs_failed:
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 02ef63e..36de91b 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1425,15 +1425,12 @@
ladrf[byte] |= (1 << (hashcode & 7));
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- printk(KERN_DEBUG " adr =");
- for (i = 0; i < 6; i++)
- printk(" %02X", adr[i]);
- printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]"
- " =", hashcode);
- for (i = 0; i < 8; i++)
- printk(" %02X", ladrf[i]);
- printk("\n");
+ if (pc_debug > 2)
+ printk(KERN_DEBUG " adr =%pM\n", adr);
+ printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode);
+ for (i = 0; i < 8; i++)
+ printk(KERN_CONT " %02X", ladrf[i]);
+ printk(KERN_CONT "\n");
}
#endif
} /* BuildLAF */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 652a368..9ef1c1b 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@
PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
+ PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 1c35e1d..a646a44 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -485,7 +485,7 @@
&new_ring_dma_addr);
if (new_tx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Consistent memory allocation failed.\n",
dev->name);
return;
@@ -496,7 +496,7 @@
GFP_ATOMIC);
if (!new_dma_addr_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_tx_ring;
}
@@ -505,7 +505,7 @@
GFP_ATOMIC);
if (!new_skb_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_lists;
}
@@ -563,7 +563,7 @@
&new_ring_dma_addr);
if (new_rx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Consistent memory allocation failed.\n",
dev->name);
return;
@@ -574,7 +574,7 @@
GFP_ATOMIC);
if (!new_dma_addr_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_rx_ring;
}
@@ -583,7 +583,7 @@
GFP_ATOMIC);
if (!new_skb_list) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR
+ printk(KERN_ERR
"%s: Memory allocation failed.\n", dev->name);
goto free_new_lists;
}
@@ -1611,8 +1611,11 @@
if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
&& pcnet32_dwio_check(ioaddr)) {
a = &pcnet32_dwio;
- } else
+ } else {
+ if (pcnet32_debug & NETIF_MSG_PROBE)
+ printk(KERN_ERR PFX "No access methods\n");
goto err_release_region;
+ }
}
chip_version =
@@ -1719,7 +1722,9 @@
ret = -ENOMEM;
goto err_release_region;
}
- SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pdev)
+ SET_NETDEV_DEV(dev, &pdev->dev);
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
@@ -1766,38 +1771,38 @@
/* Version 0x2623 and 0x2624 */
if (((chip_version + 1) & 0xfffe) == 0x2624) {
i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */
- printk("\n" KERN_INFO " tx_start_pt(0x%04x):", i);
+ printk(KERN_INFO " tx_start_pt(0x%04x):", i);
switch (i >> 10) {
case 0:
- printk(" 20 bytes,");
+ printk(KERN_CONT " 20 bytes,");
break;
case 1:
- printk(" 64 bytes,");
+ printk(KERN_CONT " 64 bytes,");
break;
case 2:
- printk(" 128 bytes,");
+ printk(KERN_CONT " 128 bytes,");
break;
case 3:
- printk("~220 bytes,");
+ printk(KERN_CONT "~220 bytes,");
break;
}
i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */
- printk(" BCR18(%x):", i & 0xffff);
+ printk(KERN_CONT " BCR18(%x):", i & 0xffff);
if (i & (1 << 5))
- printk("BurstWrEn ");
+ printk(KERN_CONT "BurstWrEn ");
if (i & (1 << 6))
- printk("BurstRdEn ");
+ printk(KERN_CONT "BurstRdEn ");
if (i & (1 << 7))
- printk("DWordIO ");
+ printk(KERN_CONT "DWordIO ");
if (i & (1 << 11))
- printk("NoUFlow ");
+ printk(KERN_CONT "NoUFlow ");
i = a->read_bcr(ioaddr, 25);
- printk("\n" KERN_INFO " SRAMSIZE=0x%04x,", i << 8);
+ printk(KERN_INFO " SRAMSIZE=0x%04x,", i << 8);
i = a->read_bcr(ioaddr, 26);
- printk(" SRAM_BND=0x%04x,", i << 8);
+ printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8);
i = a->read_bcr(ioaddr, 27);
if (i & (1 << 14))
- printk("LowLatRx");
+ printk(KERN_CONT "LowLatRx");
}
}
@@ -1818,7 +1823,6 @@
spin_lock_init(&lp->lock);
- SET_NETDEV_DEV(dev, &pdev->dev);
lp->name = chipname;
lp->shared_irq = shared;
lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */
@@ -1852,12 +1856,6 @@
((cards_found >= MAX_UNITS) || full_duplex[cards_found]))
lp->options |= PCNET32_PORT_FD;
- if (!a) {
- if (pcnet32_debug & NETIF_MSG_PROBE)
- printk(KERN_ERR PFX "No access methods\n");
- ret = -ENODEV;
- goto err_free_consistent;
- }
lp->a = *a;
/* prior to register_netdev, dev->name is not yet correct */
@@ -1973,14 +1971,13 @@
return 0;
- err_free_ring:
+err_free_ring:
pcnet32_free_ring(dev);
- err_free_consistent:
pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block),
lp->init_block, lp->init_dma_addr);
- err_free_netdev:
+err_free_netdev:
free_netdev(dev);
- err_release_region:
+err_release_region:
release_region(ioaddr, PCNET32_TOTAL_SIZE);
return ret;
}
@@ -1996,7 +1993,7 @@
&lp->tx_ring_dma_addr);
if (lp->tx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
@@ -2008,7 +2005,7 @@
&lp->rx_ring_dma_addr);
if (lp->rx_ring == NULL) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Consistent memory allocation failed.\n",
name);
return -ENOMEM;
@@ -2018,7 +2015,7 @@
GFP_ATOMIC);
if (!lp->tx_dma_addr) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2027,7 +2024,7 @@
GFP_ATOMIC);
if (!lp->rx_dma_addr) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2036,7 +2033,7 @@
GFP_ATOMIC);
if (!lp->tx_skbuff) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2045,7 +2042,7 @@
GFP_ATOMIC);
if (!lp->rx_skbuff) {
if (netif_msg_drv(lp))
- printk("\n" KERN_ERR PFX
+ printk(KERN_ERR PFX
"%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
@@ -2089,6 +2086,7 @@
static int pcnet32_open(struct net_device *dev)
{
struct pcnet32_private *lp = netdev_priv(dev);
+ struct pci_dev *pdev = lp->pci_dev;
unsigned long ioaddr = dev->base_addr;
u16 val;
int i;
@@ -2149,9 +2147,9 @@
lp->a.write_csr(ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
- if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
- (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
- lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+ (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
if (lp->options & PCNET32_PORT_ASEL) {
lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
if (netif_msg_link(lp))
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 33984b7..22cdd45 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -30,6 +30,7 @@
#ifdef CONFIG_OF_GPIO
#include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
#include <linux/of_platform.h>
#endif
@@ -81,13 +82,12 @@
.get_mdio_data = mdio_get,
};
-static int __devinit mdio_gpio_bus_init(struct device *dev,
+static struct mii_bus * __devinit mdio_gpio_bus_init(struct device *dev,
struct mdio_gpio_platform_data *pdata,
int bus_id)
{
struct mii_bus *new_bus;
struct mdio_gpio_info *bitbang;
- int ret = -ENOMEM;
int i;
bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
@@ -104,8 +104,6 @@
new_bus->name = "GPIO Bitbanged MDIO",
- ret = -ENODEV;
-
new_bus->phy_mask = pdata->phy_mask;
new_bus->irq = pdata->irqs;
new_bus->parent = dev;
@@ -129,15 +127,8 @@
dev_set_drvdata(dev, new_bus);
- ret = mdiobus_register(new_bus);
- if (ret)
- goto out_free_all;
+ return new_bus;
- return 0;
-
-out_free_all:
- dev_set_drvdata(dev, NULL);
- gpio_free(bitbang->mdio);
out_free_mdc:
gpio_free(bitbang->mdc);
out_free_bus:
@@ -145,30 +136,47 @@
out_free_bitbang:
kfree(bitbang);
out:
- return ret;
+ return NULL;
+}
+
+static void __devinit mdio_gpio_bus_deinit(struct device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(dev);
+ struct mdio_gpio_info *bitbang = bus->priv;
+
+ dev_set_drvdata(dev, NULL);
+ gpio_free(bitbang->mdio);
+ gpio_free(bitbang->mdc);
+ free_mdio_bitbang(bus);
+ kfree(bitbang);
}
static void __devexit mdio_gpio_bus_destroy(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
- struct mdio_gpio_info *bitbang = bus->priv;
mdiobus_unregister(bus);
- free_mdio_bitbang(bus);
- dev_set_drvdata(dev, NULL);
- gpio_free(bitbang->mdc);
- gpio_free(bitbang->mdio);
- kfree(bitbang);
+ mdio_gpio_bus_deinit(dev);
}
static int __devinit mdio_gpio_probe(struct platform_device *pdev)
{
struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
+ struct mii_bus *new_bus;
+ int ret;
if (!pdata)
return -ENODEV;
- return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+ new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+ if (!new_bus)
+ return -ENODEV;
+
+ ret = mdiobus_register(new_bus);
+ if (ret)
+ mdio_gpio_bus_deinit(&pdev->dev);
+
+ return ret;
}
static int __devexit mdio_gpio_remove(struct platform_device *pdev)
@@ -179,29 +187,12 @@
}
#ifdef CONFIG_OF_GPIO
-static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
- struct device_node *np)
-{
- const u32 *data;
- int len, id, irq;
-
- data = of_get_property(np, "reg", &len);
- if (!data || len != 4)
- return;
-
- id = *data;
- pdata->phy_mask &= ~(1 << id);
-
- irq = of_irq_to_resource(np, 0, NULL);
- if (irq)
- pdata->irqs[id] = irq;
-}
static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = NULL;
struct mdio_gpio_platform_data *pdata;
+ struct mii_bus *new_bus;
int ret;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
@@ -215,14 +206,18 @@
ret = of_get_gpio(ofdev->node, 1);
if (ret < 0)
- goto out_free;
+ goto out_free;
pdata->mdio = ret;
- while ((np = of_get_next_child(ofdev->node, np)))
- if (!strcmp(np->type, "ethernet-phy"))
- add_phy(pdata, np);
+ new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+ if (!new_bus)
+ return -ENODEV;
- return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+ ret = of_mdiobus_register(new_bus, ofdev->node);
+ if (ret)
+ mdio_gpio_bus_deinit(&ofdev->dev);
+
+ return ret;
out_free:
kfree(pdata);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 61755cb..eda94fc 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -928,13 +928,32 @@
* Otherwise, it's 0, and we're
* still waiting for AN */
if (err > 0) {
- phydev->state = PHY_RUNNING;
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else
+ phydev->state = PHY_NOLINK;
+ phydev->adjust_link(phydev->attached_dev);
} else {
phydev->state = PHY_AN;
phydev->link_timeout = PHY_AN_TIMEOUT;
}
- } else
- phydev->state = PHY_RUNNING;
+ } else {
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else
+ phydev->state = PHY_NOLINK;
+ phydev->adjust_link(phydev->attached_dev);
+ }
break;
}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index eba937c..b10fedd 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -134,8 +134,10 @@
err = fixup->run(phydev);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&phy_fixup_lock);
return err;
+ }
}
}
mutex_unlock(&phy_fixup_lock);
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 7a62f78..2ca8b0d 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -270,6 +270,9 @@
.ndo_stop = plip_close,
.ndo_start_xmit = plip_tx_packet,
.ndo_do_ioctl = plip_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
/* Entry point of PLIP driver.
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 17c116b..6de8399 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -356,6 +356,7 @@
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
ap_put(ap);
+ tty_unthrottle(tty);
}
static void
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 639d11b..cd37d73 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1384,7 +1384,7 @@
/* create a fragment for each channel */
bits = B;
- while (nfree > 0 && len > 0) {
+ while (len > 0) {
list = list->next;
if (list == &ppp->channels) {
i = 0;
@@ -1431,29 +1431,31 @@
*otherwise divide it according to the speed
*of the channel we are going to transmit on
*/
- if (pch->speed == 0) {
- flen = totlen/nfree ;
- if (nbigger > 0) {
- flen++;
- nbigger--;
- }
- } else {
- flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
- ((totspeed*totfree)/pch->speed)) - hdrlen;
- if (nbigger > 0) {
- flen += ((totfree - nzero)*pch->speed)/totspeed;
- nbigger -= ((totfree - nzero)*pch->speed)/
+ if (nfree > 0) {
+ if (pch->speed == 0) {
+ flen = totlen/nfree ;
+ if (nbigger > 0) {
+ flen++;
+ nbigger--;
+ }
+ } else {
+ flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
+ ((totspeed*totfree)/pch->speed)) - hdrlen;
+ if (nbigger > 0) {
+ flen += ((totfree - nzero)*pch->speed)/totspeed;
+ nbigger -= ((totfree - nzero)*pch->speed)/
totspeed;
+ }
}
+ nfree--;
}
- nfree--;
/*
*check if we are on the last channel or
*we exceded the lenght of the data to
*fragment
*/
- if ((nfree == 0) || (flen > len))
+ if ((nfree <= 0) || (flen > len))
flen = len;
/*
*it is not worth to tx on slow channels:
@@ -1467,7 +1469,7 @@
continue;
}
- mtu = pch->chan->mtu + 2 - hdrlen;
+ mtu = pch->chan->mtu - hdrlen;
if (mtu < 4)
mtu = 4;
if (flen > mtu)
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index aa3d39f..d2fa2db 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -397,6 +397,7 @@
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
sp_put(ap);
+ tty_unthrottle(tty);
}
static void
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index f0031f1..5f20902 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -1063,6 +1063,7 @@
else {
int hash = hash_item(po->pppoe_pa.sid, po->pppoe_pa.remote);
+ po = NULL;
while (++hash < PPPOE_HASH_SIZE) {
po = pn->hash_table[hash];
if (po)
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index e7935d0..e0f9219 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -2680,6 +2680,7 @@
static void __exit pppol2tp_exit(void)
{
unregister_pppox_proto(PX_PROTO_OL2TP);
+ unregister_pernet_gen_device(pppol2tp_net_id, &pppol2tp_net_ops);
proto_unregister(&pppol2tp_sk_proto);
}
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index d1a5fb4..a3932c9 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1411,6 +1411,7 @@
.ndo_set_multicast_list = gelic_net_set_multi,
.ndo_change_mtu = gelic_net_change_mtu,
.ndo_tx_timeout = gelic_net_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gelic_net_poll_controller,
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index b6b3ca9..6932b08 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2707,6 +2707,7 @@
.ndo_set_multicast_list = gelic_net_set_multi,
.ndo_change_mtu = gelic_net_change_mtu,
.ndo_tx_timeout = gelic_net_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = gelic_net_poll_controller,
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 156e02e..6ed5317 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1607,6 +1607,8 @@
int ql_cam_route_initialize(struct ql_adapter *qdev);
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
int ql_mb_about_fw(struct ql_adapter *qdev);
+void ql_link_on(struct ql_adapter *qdev);
+void ql_link_off(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 37c99fe..eb6a9ee 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -59,7 +59,7 @@
cqicb->pkt_delay =
cpu_to_le16(qdev->tx_max_coalesced_frames);
cqicb->flags = FLAGS_LI;
- status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+ status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
CFG_LCQ, rx_ring->cq_id);
if (status) {
QPRINTK(qdev, IFUP, ERR,
@@ -82,7 +82,7 @@
cqicb->pkt_delay =
cpu_to_le16(qdev->rx_max_coalesced_frames);
cqicb->flags = FLAGS_LI;
- status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+ status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
CFG_LCQ, rx_ring->cq_id);
if (status) {
QPRINTK(qdev, IFUP, ERR,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 90d1f76..5768af1 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -214,6 +214,10 @@
return -ENOMEM;
}
+ status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
+ if (status)
+ return status;
+
status = ql_wait_cfg(qdev, bit);
if (status) {
QPRINTK(qdev, IFUP, ERR,
@@ -221,12 +225,8 @@
goto exit;
}
- status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
- if (status)
- goto exit;
ql_write32(qdev, ICB_L, (u32) map);
ql_write32(qdev, ICB_H, (u32) (map >> 32));
- ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
mask = CFG_Q_MASK | (bit << 16);
value = bit | (q_id << CFG_Q_SHIFT);
@@ -237,6 +237,7 @@
*/
status = ql_wait_cfg(qdev, bit);
exit:
+ ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
pci_unmap_single(qdev->pdev, map, size, direction);
return status;
}
@@ -412,6 +413,57 @@
return status;
}
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
+{
+ int status;
+ char zero_mac_addr[ETH_ALEN];
+ char *addr;
+
+ if (set) {
+ addr = &qdev->ndev->dev_addr[0];
+ QPRINTK(qdev, IFUP, DEBUG,
+ "Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ addr[0], addr[1], addr[2], addr[3],
+ addr[4], addr[5]);
+ } else {
+ memset(zero_mac_addr, 0, ETH_ALEN);
+ addr = &zero_mac_addr[0];
+ QPRINTK(qdev, IFUP, DEBUG,
+ "Clearing MAC address on %s\n",
+ qdev->ndev->name);
+ }
+ status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+ if (status)
+ return status;
+ status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
+ MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+ ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+ if (status)
+ QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
+ "address.\n");
+ return status;
+}
+
+void ql_link_on(struct ql_adapter *qdev)
+{
+ QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
+ qdev->ndev->name);
+ netif_carrier_on(qdev->ndev);
+ ql_set_mac_addr(qdev, 1);
+}
+
+void ql_link_off(struct ql_adapter *qdev)
+{
+ QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
+ qdev->ndev->name);
+ netif_carrier_off(qdev->ndev);
+ ql_set_mac_addr(qdev, 0);
+}
+
/* Get a specific frame routing value from the CAM.
* Used for debug and reg dump.
*/
@@ -1628,7 +1680,7 @@
tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
tx_ring_desc = &tx_ring->q[mac_rsp->tid];
ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
- qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
+ qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
qdev->stats.tx_packets++;
dev_kfree_skb(tx_ring_desc->skb);
tx_ring_desc->skb = NULL;
@@ -1660,13 +1712,13 @@
/* Fire up a handler to reset the MPI processor. */
void ql_queue_fw_error(struct ql_adapter *qdev)
{
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
}
void ql_queue_asic_error(struct ql_adapter *qdev)
{
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
ql_disable_interrupts(qdev);
/* Clear adapter up bit to signal the recovery
* process that it shouldn't kill the reset worker
@@ -2104,7 +2156,7 @@
}
tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
mac_iocb_ptr = tx_ring_desc->queue_entry;
- memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
+ memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
mac_iocb_ptr->tid = tx_ring_desc->index;
@@ -2743,7 +2795,7 @@
ql_init_tx_ring(qdev, tx_ring);
- err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
+ err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
(u16) tx_ring->wq_id);
if (err) {
QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
@@ -3008,7 +3060,7 @@
int i;
u8 *hash_id = (u8 *) ricb->hash_cq_id;
- memset((void *)ricb, 0, sizeof(ricb));
+ memset((void *)ricb, 0, sizeof(*ricb));
ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
ricb->flags =
@@ -3030,7 +3082,7 @@
QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
- status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
+ status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
return status;
@@ -3039,25 +3091,40 @@
return status;
}
+static int ql_clear_routing_entries(struct ql_adapter *qdev)
+{
+ int i, status = 0;
+
+ status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+ if (status)
+ return status;
+ /* Clear all the entries in the routing table. */
+ for (i = 0; i < 16; i++) {
+ status = ql_set_routing_reg(qdev, i, 0, 0);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR,
+ "Failed to init routing register for CAM "
+ "packets.\n");
+ break;
+ }
+ }
+ ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+ return status;
+}
+
/* Initialize the frame-to-queue routing. */
static int ql_route_initialize(struct ql_adapter *qdev)
{
int status = 0;
- int i;
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
if (status)
return status;
/* Clear all the entries in the routing table. */
- for (i = 0; i < 16; i++) {
- status = ql_set_routing_reg(qdev, i, 0, 0);
- if (status) {
- QPRINTK(qdev, IFUP, ERR,
- "Failed to init routing register for CAM packets.\n");
- goto exit;
- }
- }
+ status = ql_clear_routing_entries(qdev);
+ if (status)
+ goto exit;
status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
if (status) {
@@ -3096,14 +3163,15 @@
int ql_cam_route_initialize(struct ql_adapter *qdev)
{
- int status;
+ int status, set;
- status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
- if (status)
- return status;
- status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
- MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
- ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+ /* If check if the link is up and use to
+ * determine if we are setting or clearing
+ * the MAC address in the CAM.
+ */
+ set = ql_read32(qdev, STS);
+ set &= qdev->port_link_up;
+ status = ql_set_mac_addr(qdev, set);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
return status;
@@ -3210,9 +3278,17 @@
{
u32 value;
int status = 0;
- unsigned long end_jiffies = jiffies +
- max((unsigned long)1, usecs_to_jiffies(30));
+ unsigned long end_jiffies;
+ /* Clear all the entries in the routing table. */
+ status = ql_clear_routing_entries(qdev);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+ return status;
+ }
+
+ end_jiffies = jiffies +
+ max((unsigned long)1, usecs_to_jiffies(30));
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
do {
@@ -3252,7 +3328,7 @@
int i, status = 0;
struct rx_ring *rx_ring;
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
/* Don't kill the reset worker thread if we
* are in the process of recovery.
@@ -3319,8 +3395,12 @@
}
set_bit(QL_ADAPTER_UP, &qdev->flags);
ql_alloc_rx_buffers(qdev);
- if ((ql_read32(qdev, STS) & qdev->port_init))
- netif_carrier_on(qdev->ndev);
+ /* If the port is initialized and the
+ * link is up the turn on the carrier.
+ */
+ if ((ql_read32(qdev, STS) & qdev->port_init) &&
+ (ql_read32(qdev, STS) & qdev->port_link_up))
+ ql_link_on(qdev);
ql_enable_interrupts(qdev);
ql_enable_all_completion_interrupts(qdev);
netif_tx_start_all_queues(qdev->ndev);
@@ -3346,11 +3426,6 @@
return -ENOMEM;
}
status = ql_request_irq(qdev);
- if (status)
- goto err_irq;
- return status;
-err_irq:
- ql_free_mem_resources(qdev);
return status;
}
@@ -3414,7 +3489,7 @@
for (i = 0; i < qdev->tx_ring_count; i++) {
tx_ring = &qdev->tx_ring[i];
- memset((void *)tx_ring, 0, sizeof(tx_ring));
+ memset((void *)tx_ring, 0, sizeof(*tx_ring));
tx_ring->qdev = qdev;
tx_ring->wq_id = i;
tx_ring->wq_len = qdev->tx_ring_size;
@@ -3430,7 +3505,7 @@
for (i = 0; i < qdev->rx_ring_count; i++) {
rx_ring = &qdev->rx_ring[i];
- memset((void *)rx_ring, 0, sizeof(rx_ring));
+ memset((void *)rx_ring, 0, sizeof(*rx_ring));
rx_ring->qdev = qdev;
rx_ring->cq_id = i;
rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */
@@ -3789,7 +3864,7 @@
int pos, err = 0;
u16 val16;
- memset((void *)qdev, 0, sizeof(qdev));
+ memset((void *)qdev, 0, sizeof(*qdev));
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "PCI device enable failed.\n");
@@ -3976,7 +4051,7 @@
pci_disable_device(pdev);
return err;
}
- netif_carrier_off(ndev);
+ ql_link_off(qdev);
ql_display_dev_info(ndev);
cards_found++;
return 0;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 71afbf8..6685bd9 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -238,7 +238,7 @@
&qdev->mpi_port_cfg_work, 0);
}
- netif_carrier_on(qdev->ndev);
+ ql_link_on(qdev);
}
static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -251,7 +251,7 @@
if (status)
QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
}
static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -849,7 +849,7 @@
case MB_CMD_PORT_RESET:
case MB_CMD_SET_PORT_CFG:
case MB_CMD_STOP_FW:
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
/* Signal the resulting link up AEN
* that the frame routing and mac addr
* needs to be set.
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index ed63d23..961b539 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
#include <asm/processor.h>
#define DRV_NAME "r6040"
-#define DRV_VERSION "0.23"
-#define DRV_RELDATE "05May2009"
+#define DRV_VERSION "0.24"
+#define DRV_RELDATE "08Jul2009"
/* PHY CHIP Address */
#define PHY1_ADDR 1 /* For MAC1 */
@@ -704,8 +704,11 @@
/* Read MISR status and clear */
status = ioread16(ioaddr + MISR);
- if (status == 0x0000 || status == 0xffff)
+ if (status == 0x0000 || status == 0xffff) {
+ /* Restore RDC MAC interrupt */
+ iowrite16(misr, ioaddr + MIER);
return IRQ_NONE;
+ }
/* RX interrupt request */
if (status & RX_INTS) {
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4b53b58..b82780d 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2060,8 +2060,6 @@
}
}
- pci_set_master(pdev);
-
/* ioremap MMIO region */
ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
if (!ioaddr) {
@@ -2089,6 +2087,8 @@
RTL_W16(IntrStatus, 0xffff);
+ pci_set_master(pdev);
+
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, ioaddr);
@@ -3874,6 +3874,15 @@
spin_unlock_irq(&tp->lock);
if (system_state == SYSTEM_POWER_OFF) {
+ /* WoL fails with some 8168 when the receiver is disabled. */
+ if (tp->features & RTL_FEATURE_WOL) {
+ pci_clear_master(pdev);
+
+ RTL_W8(ChipCmd, CmdRxEnb);
+ /* PCI commit */
+ RTL_R8(ChipCmd);
+ }
+
pci_wake_from_d3(pdev, true);
pci_set_power_state(pdev, PCI_D3hot);
}
diff --git a/drivers/net/s6gmac.c b/drivers/net/s6gmac.c
index 5345e47..4525cbe 100644
--- a/drivers/net/s6gmac.c
+++ b/drivers/net/s6gmac.c
@@ -793,7 +793,7 @@
struct s6gmac *pd = netdev_priv(dev);
int i = 0;
struct phy_device *p = NULL;
- while ((!(p = pd->mii.bus->phy_map[i])) && (i < PHY_MAX_ADDR))
+ while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
i++;
p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0,
PHY_INTERFACE_MODE_RGMII);
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 18821f2..e3156c9 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1593,6 +1593,7 @@
static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
{ PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
+ { PCI_DEVICE(0x1088, 0x2031) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 341882f..a2d82dd 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -865,8 +865,7 @@
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
- u32 ioaddr, boguscnt = RX_RING_SIZE;
- u32 intr_status = 0;
+ u32 ioaddr, intr_status = 0;
ioaddr = ndev->base_addr;
spin_lock(&mdp->lock);
@@ -901,12 +900,6 @@
if (intr_status & cd->eesr_err_check)
sh_eth_error(ndev, intr_status);
- if (--boguscnt < 0) {
- printk(KERN_WARNING
- "%s: Too much work at interrupt, status=0x%4.4x.\n",
- ndev->name, intr_status);
- }
-
other_irq:
spin_unlock(&mdp->lock);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 60d502e..543af20 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3854,8 +3854,10 @@
skge->speed = -1;
skge->advertising = skge_supported_modes(hw);
- if (device_may_wakeup(&hw->pdev->dev))
+ if (device_can_wakeup(&hw->pdev->dev)) {
skge->wol = wol_supported(hw) & WAKE_MAGIC;
+ device_set_wakeup_enable(&hw->pdev->dev, skge->wol);
+ }
hw->dev[port] = dev;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7681d28..0a551d8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1151,14 +1151,7 @@
/* reset the Rx prefetch unit */
sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
-
- /* Reset the RAM Buffer receive queue */
- sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET);
-
- /* Reset Rx MAC FIFO */
- sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET);
-
- sky2_read8(hw, B0_CTST);
+ mmiowb();
}
/* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -1495,6 +1488,8 @@
sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
#endif
+ sky2->restarting = 0;
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
@@ -1507,6 +1502,9 @@
sky2_set_multicast(dev);
+ /* wake queue incase we are restarting */
+ netif_wake_queue(dev);
+
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
return 0;
@@ -1540,6 +1538,8 @@
/* Number of list elements available for next tx */
static inline int tx_avail(const struct sky2_port *sky2)
{
+ if (unlikely(sky2->restarting))
+ return 0;
return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
}
@@ -1825,11 +1825,9 @@
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
- /* Disable port IRQ */
- imask = sky2_read32(hw, B0_IMSK);
- imask &= ~portirq_msk[port];
- sky2_write32(hw, B0_IMSK, imask);
- sky2_read32(hw, B0_IMSK);
+ /* explicitly shut off tx incase we're restarting */
+ sky2->restarting = 1;
+ netif_tx_disable(dev);
/* Force flow control off */
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -1870,8 +1868,6 @@
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
- sky2_rx_stop(sky2);
-
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
@@ -1881,6 +1877,14 @@
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
sky2_read8(hw, STAT_ISR_TIMER_CTRL);
+ sky2_rx_stop(sky2);
+
+ /* Disable port IRQ */
+ imask = sky2_read32(hw, B0_IMSK);
+ imask &= ~portirq_msk[port];
+ sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_IMSK);
+
synchronize_irq(hw->pdev->irq);
napi_synchronize(&hw->napi);
@@ -2366,7 +2370,7 @@
{
struct sky2_port *sky2 = netdev_priv(dev);
- if (netif_running(dev)) {
+ if (likely(netif_running(dev) && !sky2->restarting)) {
netif_tx_lock(dev);
sky2_tx_complete(sky2, last);
netif_tx_unlock(dev);
@@ -2495,7 +2499,7 @@
if (likely(status >> 16 == (status & 0xffff))) {
skb = sky2->rx_ring[sky2->rx_next].skb;
skb->ip_summed = CHECKSUM_COMPLETE;
- skb->csum = status & 0xffff;
+ skb->csum = le16_to_cpu(status);
} else {
printk(KERN_NOTICE PFX "%s: hardware receive "
"checksum problem (status = %#x)\n",
@@ -4290,6 +4294,7 @@
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
sky2->rx_pending = RX_DEF_PENDING;
+ sky2->restarting = 0;
hw->dev[port] = dev;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b5549c9..4486b06 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2051,6 +2051,7 @@
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
u8 rx_csum;
u8 wol;
+ u8 restarting;
enum flow_control flow_mode;
enum flow_control flow_status;
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fdcbaf8..1c70e99 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1774,6 +1774,7 @@
.ndo_start_xmit = smc_hard_start_xmit,
.ndo_tx_timeout = smc_timeout,
.ndo_set_multicast_list = smc_set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index f1f773b..57a159f 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -186,7 +186,8 @@
#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
#define SMC_IRQ_FLAGS (-1) /* from resource */
-#elif defined(CONFIG_MACH_LOGICPD_PXA270)
+#elif defined(CONFIG_MACH_LOGICPD_PXA270) \
+ || defined(CONFIG_MACH_NOMADIK_8815NHK)
#define SMC_CAN_USE_8BIT 0
#define SMC_CAN_USE_16BIT 1
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b60639b..94b6d26 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1779,6 +1779,7 @@
.ndo_get_stats = smsc911x_get_stats,
.ndo_set_multicast_list = smsc911x_set_multicast_list,
.ndo_do_ioctl = smsc911x_do_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = smsc911x_set_mac_address,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1938,7 +1939,7 @@
if (!res)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
iounmap(pdata->ioaddr);
@@ -1976,7 +1977,7 @@
retval = -ENODEV;
goto out_0;
}
- res_size = res->end - res->start + 1;
+ res_size = resource_size(res);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
@@ -2104,7 +2105,7 @@
out_free_netdev_2:
free_netdev(dev);
out_release_io_1:
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
out_0:
return retval;
}
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 838cce8..669253c 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -180,7 +180,7 @@
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 545f81b..d1521c3 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1698,13 +1698,13 @@
#ifdef __i386__
if (netif_msg_hw(np)) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ printk(KERN_DEBUG " Tx ring at %8.8x:\n",
(int)(np->tx_ring_dma));
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
np->tx_ring[i].frag[0].length);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)(np->rx_ring_dma));
for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index a82fb2a..f1e5e45 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -1016,7 +1016,9 @@
.ndo_open = vnet_open,
.ndo_stop = vnet_close,
.ndo_set_multicast_list = vnet_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = vnet_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = vnet_tx_timeout,
.ndo_change_mtu = vnet_change_mtu,
.ndo_start_xmit = vnet_start_xmit,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 9d89611..08a6c41 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -1912,7 +1912,7 @@
find_turbo_adapters(io);
- for (i = 0; io[i] && (i < IBMTR_MAX_ADAPTERS); i++) {
+ for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) {
struct net_device *dev;
irq[i] = 0;
mem[i] = 0;
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 0f78f99..7030bd5 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1132,7 +1132,9 @@
}
if (!is_valid_ether_addr(dev->dev_addr)) {
- printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2);
+ printk(KERN_ERR
+ "%s: Invalid MAC address. word1: %08x, word2: %08x\n",
+ dev->name, word1, word2);
return -EINVAL;
}
@@ -1201,8 +1203,8 @@
__set_bit(hash, &data->mc_hash[0]);
} else {
printk(KERN_ERR
- "%s: got multicast address of length %d "
- "instead of 6.\n", dev->name,
+ "%s: got multicast address of length %d instead of 6.\n",
+ dev->name,
mc->dmi_addrlen);
}
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 81f054d..ef49744 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -944,9 +944,10 @@
macmode &= ~FullDuplex;
if (netif_msg_link(de)) {
- printk(KERN_INFO "%s: set link %s\n"
- KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
- KERN_INFO "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+ printk(KERN_INFO
+ "%s: set link %s\n"
+ "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
+ "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
de->dev->name, media_name[media],
de->dev->name, dr32(MacMode), dr32(SIAStatus),
dr32(CSR13), dr32(CSR14), dr32(CSR15),
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index eb72d2e..acfdccd 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -5059,7 +5059,7 @@
if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
for (j=0; j<limit; j++) { /* Search PHY table */
if (id != phy_info[j].id) continue; /* ID match? */
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
if (k < DE4X5_MAX_PHY) {
memcpy((char *)&lp->phy[k],
(char *)&phy_info[j], sizeof(struct phy_table));
@@ -5072,7 +5072,7 @@
break;
}
if ((j == limit) && (i < DE4X5_MAX_MII)) {
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
lp->phy[k].addr = i;
lp->phy[k].id = id;
lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
@@ -5091,7 +5091,7 @@
purgatory:
lp->active = 0;
if (lp->phy[0].id) { /* Reset the PHY devices */
- for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
+ for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 2abb5d3..99a6364 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -570,16 +570,18 @@
(unsigned int)tp->rx_ring[i].buffer2,
buf[0], buf[1], buf[2]);
for (j = 0; buf[j] != 0xee && j < 1600; j++)
- if (j < 100) printk(" %2.2x", buf[j]);
- printk(" j=%d.\n", j);
+ if (j < 100)
+ printk(KERN_CONT " %2.2x", buf[j]);
+ printk(KERN_CONT " j=%d.\n", j);
}
printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
- printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ (unsigned int)tp->rx_ring[i].status);
+ printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
- printk("\n");
+ printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
+ printk(KERN_CONT "\n");
}
#endif
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 842b1a2c..0f15773 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -142,7 +142,7 @@
static const char version[] __initconst =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) "
DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
- KERN_INFO " http://www.scyld.com/network/drivers.html\n";
+ " http://www.scyld.com/network/drivers.html\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
@@ -939,7 +939,7 @@
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
- printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring);
+ printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
printk(" %8.8x", np->tx_ring[i].status);
printk("\n");
@@ -1520,7 +1520,7 @@
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n",
i, np->tx_ring[i].length,
np->tx_ring[i].status, np->tx_ring[i].buffer1);
- printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ printk(KERN_DEBUG " Rx ring %8.8x:\n",
(int)np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 11a0ba4..027f7ab 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun = __tun_get(tfile);
- struct sock *sk = tun->sk;
+ struct sock *sk;
unsigned int mask = 0;
if (!tun)
return POLLERR;
+ sk = tun->sk;
+
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
poll_wait(file, &tun->socket.wait, wait);
@@ -1324,20 +1326,22 @@
struct tun_file *tfile = file->private_data;
struct tun_struct *tun;
-
- rtnl_lock();
tun = __tun_get(tfile);
if (tun) {
- DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
+ struct net_device *dev = tun->dev;
+
+ DBG(KERN_INFO "%s: tun_chr_close\n", dev->name);
__tun_detach(tun);
/* If desireable, unregister the netdevice. */
- if (!(tun->flags & TUN_PERSIST))
- unregister_netdevice(tun->dev);
-
+ if (!(tun->flags & TUN_PERSIST)) {
+ rtnl_lock();
+ if (dev->reg_state == NETREG_REGISTERED)
+ unregister_netdevice(dev);
+ rtnl_unlock();
+ }
}
- rtnl_unlock();
tun = tfile->tun;
if (tun)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 40c6eba..3b957e6 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1590,13 +1590,13 @@
priv->oldspeed = 0;
priv->oldduplex = -1;
- if (!ug_info->phy_node)
- return 0;
-
phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
priv->phy_interface);
+ if (!phydev)
+ phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+ priv->phy_interface);
if (!phydev) {
- printk("%s: Could not attach to PHY\n", dev->name);
+ dev_err(&dev->dev, "Could not attach to PHY\n");
return -ENODEV;
}
@@ -3608,9 +3608,7 @@
struct ucc_geth_private *ugeth = NULL;
struct ucc_geth_info *ug_info;
struct resource res;
- struct device_node *phy;
int err, ucc_num, max_speed = 0;
- const u32 *fixed_link;
const unsigned int *prop;
const char *sprop;
const void *mac_addr;
@@ -3708,15 +3706,8 @@
ug_info->uf_info.regs = res.start;
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
- fixed_link = of_get_property(np, "fixed-link", NULL);
- if (fixed_link) {
- phy = NULL;
- } else {
- phy = of_parse_phandle(np, "phy-handle", 0);
- if (phy == NULL)
- return -ENODEV;
- }
- ug_info->phy_node = phy;
+
+ ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
/* Find the TBI PHY node. If it's not there, we don't support SGMII */
ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -3725,7 +3716,7 @@
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
/* handle interface property present in old trees */
- prop = of_get_property(phy, "interface", NULL);
+ prop = of_get_property(ug_info->phy_node, "interface", NULL);
if (prop != NULL) {
phy_interface = enet_to_phy_interface[*prop];
max_speed = enet_to_speed[*prop];
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a906d39..c47237c 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -369,4 +369,12 @@
(Powerline Communications) solution with an Intellon
INT51x1/INT5200 chip, like the "devolo dLan duo".
+config USB_CDC_PHONET
+ tristate "CDC Phonet support"
+ depends on PHONET
+ help
+ Choose this option to support the Phonet interface to a Nokia
+ cellular modem, as found on most Nokia handsets with the
+ "PC suite" USB profile.
+
endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index b870b0b..e17afb7 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -21,4 +21,5 @@
obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
+obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
new file mode 100644
index 0000000..792af72
--- /dev/null
+++ b/drivers/net/usb/cdc-phonet.c
@@ -0,0 +1,461 @@
+/*
+ * phonet.c -- USB CDC Phonet host driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+
+#define PN_MEDIA_USB 0x1B
+
+static const unsigned rxq_size = 17;
+
+struct usbpn_dev {
+ struct net_device *dev;
+
+ struct usb_interface *intf, *data_intf;
+ struct usb_device *usb;
+ unsigned int tx_pipe, rx_pipe;
+ u8 active_setting;
+ u8 disconnected;
+
+ unsigned tx_queue;
+ spinlock_t tx_lock;
+
+ spinlock_t rx_lock;
+ struct sk_buff *rx_skb;
+ struct urb *urbs[0];
+};
+
+static void tx_complete(struct urb *req);
+static void rx_complete(struct urb *req);
+
+/*
+ * Network device callbacks
+ */
+static int usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ struct urb *req = NULL;
+ unsigned long flags;
+ int err;
+
+ if (skb->protocol != htons(ETH_P_PHONET))
+ goto drop;
+
+ req = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!req)
+ goto drop;
+ usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
+ tx_complete, skb);
+ req->transfer_flags = URB_ZERO_PACKET;
+ err = usb_submit_urb(req, GFP_ATOMIC);
+ if (err) {
+ usb_free_urb(req);
+ goto drop;
+ }
+
+ spin_lock_irqsave(&pnd->tx_lock, flags);
+ pnd->tx_queue++;
+ if (pnd->tx_queue >= dev->tx_queue_len)
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&pnd->tx_lock, flags);
+ return 0;
+
+drop:
+ dev_kfree_skb(skb);
+ dev->stats.tx_dropped++;
+ return 0;
+}
+
+static void tx_complete(struct urb *req)
+{
+ struct sk_buff *skb = req->context;
+ struct net_device *dev = skb->dev;
+ struct usbpn_dev *pnd = netdev_priv(dev);
+
+ switch (req->status) {
+ case 0:
+ dev->stats.tx_bytes += skb->len;
+ break;
+
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev->stats.tx_aborted_errors++;
+ default:
+ dev->stats.tx_errors++;
+ dev_dbg(&dev->dev, "TX error (%d)\n", req->status);
+ }
+ dev->stats.tx_packets++;
+
+ spin_lock(&pnd->tx_lock);
+ pnd->tx_queue--;
+ netif_wake_queue(dev);
+ spin_unlock(&pnd->tx_lock);
+
+ dev_kfree_skb_any(skb);
+ usb_free_urb(req);
+}
+
+static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
+{
+ struct net_device *dev = pnd->dev;
+ struct page *page;
+ int err;
+
+ page = __netdev_alloc_page(dev, gfp_flags);
+ if (!page)
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
+ PAGE_SIZE, rx_complete, dev);
+ req->transfer_flags = 0;
+ err = usb_submit_urb(req, gfp_flags);
+ if (unlikely(err)) {
+ dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
+ netdev_free_page(dev, page);
+ }
+ return err;
+}
+
+static void rx_complete(struct urb *req)
+{
+ struct net_device *dev = req->context;
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ struct page *page = virt_to_page(req->transfer_buffer);
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ switch (req->status) {
+ case 0:
+ spin_lock_irqsave(&pnd->rx_lock, flags);
+ skb = pnd->rx_skb;
+ if (!skb) {
+ skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
+ if (likely(skb)) {
+ /* Can't use pskb_pull() on page in IRQ */
+ memcpy(skb_put(skb, 1), page_address(page), 1);
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+ page, 1, req->actual_length);
+ page = NULL;
+ }
+ } else {
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+ page, 0, req->actual_length);
+ page = NULL;
+ }
+ if (req->actual_length < PAGE_SIZE)
+ pnd->rx_skb = NULL; /* Last fragment */
+ else
+ skb = NULL;
+ spin_unlock_irqrestore(&pnd->rx_lock, flags);
+ if (skb) {
+ skb->protocol = htons(ETH_P_PHONET);
+ skb_reset_mac_header(skb);
+ __skb_pull(skb, 1);
+ skb->dev = dev;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
+
+ netif_rx(skb);
+ }
+ goto resubmit;
+
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ req = NULL;
+ break;
+
+ case -EOVERFLOW:
+ dev->stats.rx_over_errors++;
+ dev_dbg(&dev->dev, "RX overflow\n");
+ break;
+
+ case -EILSEQ:
+ dev->stats.rx_crc_errors++;
+ break;
+ }
+
+ dev->stats.rx_errors++;
+resubmit:
+ if (page)
+ netdev_free_page(dev, page);
+ if (req)
+ rx_submit(pnd, req, GFP_ATOMIC);
+}
+
+static int usbpn_close(struct net_device *dev);
+
+static int usbpn_open(struct net_device *dev)
+{
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ int err;
+ unsigned i;
+ unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+ err = usb_set_interface(pnd->usb, num, pnd->active_setting);
+ if (err)
+ return err;
+
+ for (i = 0; i < rxq_size; i++) {
+ struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
+
+ if (!req || rx_submit(pnd, req, GFP_KERNEL)) {
+ usbpn_close(dev);
+ return -ENOMEM;
+ }
+ pnd->urbs[i] = req;
+ }
+
+ netif_wake_queue(dev);
+ return 0;
+}
+
+static int usbpn_close(struct net_device *dev)
+{
+ struct usbpn_dev *pnd = netdev_priv(dev);
+ unsigned i;
+ unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+ netif_stop_queue(dev);
+
+ for (i = 0; i < rxq_size; i++) {
+ struct urb *req = pnd->urbs[i];
+
+ if (!req)
+ continue;
+ usb_kill_urb(req);
+ usb_free_urb(req);
+ pnd->urbs[i] = NULL;
+ }
+
+ return usb_set_interface(pnd->usb, num, !pnd->active_setting);
+}
+
+static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+static const struct net_device_ops usbpn_ops = {
+ .ndo_open = usbpn_open,
+ .ndo_stop = usbpn_close,
+ .ndo_start_xmit = usbpn_xmit,
+ .ndo_change_mtu = usbpn_set_mtu,
+};
+
+static void usbpn_setup(struct net_device *dev)
+{
+ dev->features = 0;
+ dev->netdev_ops = &usbpn_ops,
+ dev->header_ops = &phonet_header_ops;
+ dev->type = ARPHRD_PHONET;
+ dev->flags = IFF_POINTOPOINT | IFF_NOARP;
+ dev->mtu = PHONET_MAX_MTU;
+ dev->hard_header_len = 1;
+ dev->dev_addr[0] = PN_MEDIA_USB;
+ dev->addr_len = 1;
+ dev->tx_queue_len = 3;
+
+ dev->destructor = free_netdev;
+}
+
+/*
+ * USB driver callbacks
+ */
+static struct usb_device_id usbpn_ids[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_INT_CLASS
+ | USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x0421, /* Nokia */
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = 0xFE,
+ },
+ { },
+};
+
+MODULE_DEVICE_TABLE(usb, usbpn_ids);
+
+static struct usb_driver usbpn_driver;
+
+int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ static const char ifname[] = "usbpn%d";
+ const struct usb_cdc_union_desc *union_header = NULL;
+ const struct usb_cdc_header_desc *phonet_header = NULL;
+ const struct usb_host_interface *data_desc;
+ struct usb_interface *data_intf;
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct net_device *dev;
+ struct usbpn_dev *pnd;
+ u8 *data;
+ int len, err;
+
+ data = intf->altsetting->extra;
+ len = intf->altsetting->extralen;
+ while (len >= 3) {
+ u8 dlen = data[0];
+ if (dlen < 3)
+ return -EINVAL;
+
+ /* bDescriptorType */
+ if (data[1] == USB_DT_CS_INTERFACE) {
+ /* bDescriptorSubType */
+ switch (data[2]) {
+ case USB_CDC_UNION_TYPE:
+ if (union_header || dlen < 5)
+ break;
+ union_header =
+ (struct usb_cdc_union_desc *)data;
+ break;
+ case 0xAB:
+ if (phonet_header || dlen < 5)
+ break;
+ phonet_header =
+ (struct usb_cdc_header_desc *)data;
+ break;
+ }
+ }
+ data += dlen;
+ len -= dlen;
+ }
+
+ if (!union_header || !phonet_header)
+ return -EINVAL;
+
+ data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
+ if (data_intf == NULL)
+ return -ENODEV;
+ /* Data interface has one inactive and one active setting */
+ if (data_intf->num_altsetting != 2)
+ return -EINVAL;
+ if (data_intf->altsetting[0].desc.bNumEndpoints == 0
+ && data_intf->altsetting[1].desc.bNumEndpoints == 2)
+ data_desc = data_intf->altsetting + 1;
+ else
+ if (data_intf->altsetting[0].desc.bNumEndpoints == 2
+ && data_intf->altsetting[1].desc.bNumEndpoints == 0)
+ data_desc = data_intf->altsetting;
+ else
+ return -EINVAL;
+
+ dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
+ ifname, usbpn_setup);
+ if (!dev)
+ return -ENOMEM;
+
+ pnd = netdev_priv(dev);
+ SET_NETDEV_DEV(dev, &intf->dev);
+ netif_stop_queue(dev);
+
+ pnd->dev = dev;
+ pnd->usb = usb_get_dev(usbdev);
+ pnd->intf = intf;
+ pnd->data_intf = data_intf;
+ spin_lock_init(&pnd->tx_lock);
+ spin_lock_init(&pnd->rx_lock);
+ /* Endpoints */
+ if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
+ pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+ data_desc->endpoint[0].desc.bEndpointAddress);
+ pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+ data_desc->endpoint[1].desc.bEndpointAddress);
+ } else {
+ pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+ data_desc->endpoint[1].desc.bEndpointAddress);
+ pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+ data_desc->endpoint[0].desc.bEndpointAddress);
+ }
+ pnd->active_setting = data_desc - data_intf->altsetting;
+
+ err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
+ if (err)
+ goto out;
+
+ /* Force inactive mode until the network device is brought UP */
+ usb_set_interface(usbdev, union_header->bSlaveInterface0,
+ !pnd->active_setting);
+ usb_set_intfdata(intf, pnd);
+
+ err = register_netdev(dev);
+ if (err) {
+ usb_driver_release_interface(&usbpn_driver, data_intf);
+ goto out;
+ }
+
+ dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
+ return 0;
+
+out:
+ usb_set_intfdata(intf, NULL);
+ free_netdev(dev);
+ return err;
+}
+
+static void usbpn_disconnect(struct usb_interface *intf)
+{
+ struct usbpn_dev *pnd = usb_get_intfdata(intf);
+ struct usb_device *usb = pnd->usb;
+
+ if (pnd->disconnected)
+ return;
+
+ pnd->disconnected = 1;
+ usb_driver_release_interface(&usbpn_driver,
+ (pnd->intf == intf) ? pnd->data_intf : pnd->intf);
+ unregister_netdev(pnd->dev);
+ usb_put_dev(usb);
+}
+
+static struct usb_driver usbpn_driver = {
+ .name = "cdc_phonet",
+ .probe = usbpn_probe,
+ .disconnect = usbpn_disconnect,
+ .id_table = usbpn_ids,
+};
+
+static int __init usbpn_init(void)
+{
+ return usb_register(&usbpn_driver);
+}
+
+static void __exit usbpn_exit(void)
+{
+ usb_deregister(&usbpn_driver);
+}
+
+module_init(usbpn_init);
+module_exit(usbpn_exit);
+
+MODULE_AUTHOR("Remi Denis-Courmont");
+MODULE_DESCRIPTION("USB CDC Phonet host interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 80e0177..45cebfb 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -311,7 +311,7 @@
* bmCRC = 0 : CRC = 0xDEADBEEF
*/
if (header & BIT(14))
- crc2 = ~crc32_le(~0, skb2->data, len);
+ crc2 = ~crc32_le(~0, skb2->data, skb2->len);
else
crc2 = 0xdeadbeef;
@@ -319,7 +319,7 @@
return crc == crc2;
if (unlikely(crc != crc2)) {
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
dev_kfree_skb_any(skb2);
} else
usbnet_skb_return(dev, skb2);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 7ae8244..1d3730d 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -513,11 +513,11 @@
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
if (unlikely(status & 0xbf)) {
- if (status & 0x01) dev->stats.rx_fifo_errors++;
- if (status & 0x02) dev->stats.rx_crc_errors++;
- if (status & 0x04) dev->stats.rx_frame_errors++;
- if (status & 0x20) dev->stats.rx_missed_errors++;
- if (status & 0x90) dev->stats.rx_length_errors++;
+ if (status & 0x01) dev->net->stats.rx_fifo_errors++;
+ if (status & 0x02) dev->net->stats.rx_crc_errors++;
+ if (status & 0x04) dev->net->stats.rx_frame_errors++;
+ if (status & 0x20) dev->net->stats.rx_missed_errors++;
+ if (status & 0x90) dev->net->stats.rx_length_errors++;
return 0;
}
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index e013147..1f9ec29 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -999,6 +999,9 @@
.ndo_tx_timeout = kaweth_tx_timeout,
.ndo_set_multicast_list = kaweth_set_rx_mode,
.ndo_get_stats = kaweth_netdev_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
static int kaweth_probe(
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index 034e8a7..aeb1ab0 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -433,7 +433,7 @@
dbg("rx framesize %d range %d..%d mtu %d", skb->len,
net->hard_header_len, dev->hard_mtu, net->mtu);
#endif
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
nc_ensure_sync(dev);
return 0;
}
@@ -442,12 +442,12 @@
hdr_len = le16_to_cpup(&header->hdr_len);
packet_len = le16_to_cpup(&header->packet_len);
if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("packet too big, %d", packet_len);
nc_ensure_sync(dev);
return 0;
} else if (hdr_len < MIN_HEADER) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("header too short, %d", hdr_len);
nc_ensure_sync(dev);
return 0;
@@ -465,21 +465,21 @@
if ((packet_len & 0x01) == 0) {
if (skb->data [packet_len] != PAD_BYTE) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("bad pad");
return 0;
}
skb_trim(skb, skb->len - 1);
}
if (skb->len != packet_len) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
dbg("bad packet len %d (expected %d)",
skb->len, packet_len);
nc_ensure_sync(dev);
return 0;
}
if (header->packet_id != get_unaligned(&trailer->packet_id)) {
- dev->stats.rx_fifo_errors++;
+ dev->net->stats.rx_fifo_errors++;
dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
le16_to_cpu(header->packet_id),
le16_to_cpu(trailer->packet_id));
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 73acbd2..631d269a 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1493,6 +1493,9 @@
.ndo_set_multicast_list = pegasus_set_multicast,
.ndo_get_stats = pegasus_netdev_stats,
.ndo_tx_timeout = pegasus_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
};
static struct usb_driver pegasus_driver = {
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 1bf243e..2232232 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -487,7 +487,7 @@
if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
|| skb->len < msg_len
|| (data_offset + data_len + 8) > msg_len)) {
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
le32_to_cpu(hdr->msg_type),
msg_len, data_offset, data_len, skb->len);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 89a91f8..fe04589 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1108,18 +1108,18 @@
if (unlikely(header & RX_STS_ES_)) {
if (netif_msg_rx_err(dev))
devdbg(dev, "Error header=0x%08x", header);
- dev->stats.rx_errors++;
- dev->stats.rx_dropped++;
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_dropped++;
if (header & RX_STS_CRC_) {
- dev->stats.rx_crc_errors++;
+ dev->net->stats.rx_crc_errors++;
} else {
if (header & (RX_STS_TL_ | RX_STS_RF_))
- dev->stats.rx_frame_errors++;
+ dev->net->stats.rx_frame_errors++;
if ((header & RX_STS_LE_) &&
(!(header & RX_STS_FT_)))
- dev->stats.rx_length_errors++;
+ dev->net->stats.rx_length_errors++;
}
} else {
/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 22c0585..edfd9e1 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -234,8 +234,8 @@
int status;
skb->protocol = eth_type_trans (skb, dev->net);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += skb->len;
if (netif_msg_rx_status (dev))
devdbg (dev, "< rx, len %zu, type 0x%x",
@@ -397,7 +397,7 @@
if (netif_msg_rx_err (dev))
devdbg (dev, "drop");
error:
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
skb_queue_tail (&dev->done, skb);
}
}
@@ -420,8 +420,8 @@
case 0:
if (skb->len < dev->net->hard_header_len) {
entry->state = rx_cleanup;
- dev->stats.rx_errors++;
- dev->stats.rx_length_errors++;
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_length_errors++;
if (netif_msg_rx_err (dev))
devdbg (dev, "rx length %d", skb->len);
}
@@ -433,7 +433,7 @@
* storm, recovering as needed.
*/
case -EPIPE:
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
usbnet_defer_kevent (dev, EVENT_RX_HALT);
// FALLTHROUGH
@@ -451,7 +451,7 @@
case -EPROTO:
case -ETIME:
case -EILSEQ:
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
if (!timer_pending (&dev->delay)) {
mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
if (netif_msg_link (dev))
@@ -465,12 +465,12 @@
/* data overrun ... flush fifo? */
case -EOVERFLOW:
- dev->stats.rx_over_errors++;
+ dev->net->stats.rx_over_errors++;
// FALLTHROUGH
default:
entry->state = rx_cleanup;
- dev->stats.rx_errors++;
+ dev->net->stats.rx_errors++;
if (netif_msg_rx_err (dev))
devdbg (dev, "rx status %d", urb_status);
break;
@@ -583,8 +583,8 @@
if (netif_msg_ifdown (dev))
devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
- dev->stats.rx_packets, dev->stats.tx_packets,
- dev->stats.rx_errors, dev->stats.tx_errors
+ net->stats.rx_packets, net->stats.tx_packets,
+ net->stats.rx_errors, net->stats.tx_errors
);
// ensure there are no more active urbs
@@ -891,10 +891,10 @@
struct usbnet *dev = entry->dev;
if (urb->status == 0) {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += entry->length;
+ dev->net->stats.tx_packets++;
+ dev->net->stats.tx_bytes += entry->length;
} else {
- dev->stats.tx_errors++;
+ dev->net->stats.tx_errors++;
switch (urb->status) {
case -EPIPE:
@@ -1020,7 +1020,7 @@
devdbg (dev, "drop, code %d", retval);
drop:
retval = NET_XMIT_SUCCESS;
- dev->stats.tx_dropped++;
+ dev->net->stats.tx_dropped++;
if (skb)
dev_kfree_skb_any (skb);
usb_free_urb (urb);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 87197dd..1097c72 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -208,11 +208,14 @@
static struct net_device_stats *veth_get_stats(struct net_device *dev)
{
- struct veth_priv *priv = netdev_priv(dev);
- struct net_device_stats *dev_stats = &dev->stats;
- unsigned int cpu;
+ struct veth_priv *priv;
+ struct net_device_stats *dev_stats;
+ int cpu;
struct veth_net_stats *stats;
+ priv = netdev_priv(dev);
+ dev_stats = &dev->stats;
+
dev_stats->rx_packets = 0;
dev_stats->tx_packets = 0;
dev_stats->rx_bytes = 0;
@@ -220,17 +223,16 @@
dev_stats->tx_dropped = 0;
dev_stats->rx_dropped = 0;
- if (priv->stats)
- for_each_online_cpu(cpu) {
- stats = per_cpu_ptr(priv->stats, cpu);
+ for_each_online_cpu(cpu) {
+ stats = per_cpu_ptr(priv->stats, cpu);
- dev_stats->rx_packets += stats->rx_packets;
- dev_stats->tx_packets += stats->tx_packets;
- dev_stats->rx_bytes += stats->rx_bytes;
- dev_stats->tx_bytes += stats->tx_bytes;
- dev_stats->tx_dropped += stats->tx_dropped;
- dev_stats->rx_dropped += stats->rx_dropped;
- }
+ dev_stats->rx_packets += stats->rx_packets;
+ dev_stats->tx_packets += stats->tx_packets;
+ dev_stats->rx_bytes += stats->rx_bytes;
+ dev_stats->tx_bytes += stats->tx_bytes;
+ dev_stats->tx_dropped += stats->tx_dropped;
+ dev_stats->rx_dropped += stats->rx_dropped;
+ }
return dev_stats;
}
@@ -257,8 +259,6 @@
netif_carrier_off(dev);
netif_carrier_off(priv->peer);
- free_percpu(priv->stats);
- priv->stats = NULL;
return 0;
}
@@ -289,6 +289,15 @@
return 0;
}
+static void veth_dev_free(struct net_device *dev)
+{
+ struct veth_priv *priv;
+
+ priv = netdev_priv(dev);
+ free_percpu(priv->stats);
+ free_netdev(dev);
+}
+
static const struct net_device_ops veth_netdev_ops = {
.ndo_init = veth_dev_init,
.ndo_open = veth_open,
@@ -306,7 +315,7 @@
dev->netdev_ops = &veth_netdev_ops;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
- dev->destructor = free_netdev;
+ dev->destructor = veth_dev_free;
}
/*
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index d3489a3..88c30a5 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -621,6 +621,7 @@
.ndo_start_xmit = rhine_start_tx,
.ndo_get_stats = rhine_get_stats,
.ndo_set_multicast_list = rhine_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_do_ioctl = netdev_ioctl,
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index 223238d..1ea1ef6 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -584,8 +584,9 @@
sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ printk(KERN_CONT "\n");
- printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+ printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inw(get_dmac_tx(port) + CDAL, card),
sca_inw(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index 497b003..f099c34 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -529,8 +529,9 @@
sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in");
for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++)
printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat)));
+ printk(KERN_CONT "\n");
- printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
+ printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
"last=%u %sactive",
sca_inl(get_dmac_tx(port) + CDAL, card),
sca_inl(get_dmac_tx(port) + EDAL, card),
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 3fb9dbc..d14e95a 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -326,11 +326,9 @@
}
if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
- printk( KERN_WARNING " WARNING: The PCI BIOS assigned "
- "this PCI card to IRQ %d, which is unlikely "
- "to work!.\n"
- KERN_WARNING " You should use the PCI BIOS "
- "setup to assign a valid IRQ line.\n",
+ printk( KERN_WARNING
+ " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+ " You should use the PCI BIOS setup to assign a valid IRQ line.\n",
pci_irq_line );
/* avoiding re-enable dual adapters */
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index c70604f..8ce5e4c 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5918,20 +5918,19 @@
readSsidRid(local, &SSID_rid);
/* Check if we asked for `any' */
- if(dwrq->flags == 0) {
+ if (dwrq->flags == 0) {
/* Just send an empty SSID list */
memset(&SSID_rid, 0, sizeof(SSID_rid));
} else {
- int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ unsigned index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
/* Check the size of the string */
- if(dwrq->length > IW_ESSID_MAX_SIZE) {
+ if (dwrq->length > IW_ESSID_MAX_SIZE)
return -E2BIG ;
- }
+
/* Check if index is valid */
- if((index < 0) || (index >= 4)) {
+ if (index >= ARRAY_SIZE(SSID_rid.ssids))
return -EINVAL;
- }
/* Set the SSID */
memset(SSID_rid.ssids[index].ssid, 0,
@@ -6819,7 +6818,7 @@
return -EINVAL;
}
clear_bit (FLAG_RADIO_OFF, &local->flags);
- for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
+ for (i = 0; i < 8 && cap_rid.txPowerLevels[i]; i++)
if (v == cap_rid.txPowerLevels[i]) {
readConfigRid(local, 1);
local->config.txPower = v;
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index d26e7b4..eb0337c 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,5 +1,6 @@
config ATH_COMMON
tristate "Atheros Wireless Cards"
+ depends on WLAN_80211
depends on ATH5K || ATH9K || AR9170_USB
source "drivers/net/wireless/ath/ath5k/Kconfig"
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ea04515..029c1bc 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2970,6 +2970,9 @@
if (modparam_nohwcrypt)
return -EOPNOTSUPP;
+ if (sc->opmode == NL80211_IFTYPE_AP)
+ return -EOPNOTSUPP;
+
switch (key->alg) {
case ALG_WEP:
case ALG_TKIP:
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 1aeafb5..aad259b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -478,6 +478,18 @@
"Reset ANI state opmode %u\n", ah->opmode);
ah->stats.ast_ani_reset++;
+ if (ah->opmode == NL80211_IFTYPE_AP) {
+ /*
+ * ath9k_hw_ani_control() will only process items set on
+ * ah->ani_function
+ */
+ if (IS_CHAN_2GHZ(chan))
+ ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+ ATH9K_ANI_FIRSTEP_LEVEL);
+ else
+ ah->ani_function = 0;
+ }
+
ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index a2fda70..ce0e86c 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -460,7 +460,7 @@
integer = swab32(eep->modalHeader.antCtrlCommon);
eep->modalHeader.antCtrlCommon = integer;
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
integer = swab32(eep->modalHeader.antCtrlChain[i]);
eep->modalHeader.antCtrlChain[i] = integer;
}
@@ -914,7 +914,7 @@
ctlMode, numCtlModes, isHt40CtlMode,
(pCtlMode[ctlMode] & EXT_ADDITIVE));
- for (i = 0; (i < AR5416_NUM_CTLS) &&
+ for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
pEepData->ctlIndex[i]; i++) {
DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b61a071..4ccf48e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -355,7 +355,14 @@
}
if (bf_next == NULL) {
- INIT_LIST_HEAD(&bf_head);
+ /*
+ * Make sure the last desc is reclaimed if it
+ * not a holding desc.
+ */
+ if (!bf_last->bf_stale)
+ list_move_tail(&bf->list, &bf_head);
+ else
+ INIT_LIST_HEAD(&bf_head);
} else {
ASSERT(!list_empty(bf_q));
list_move_tail(&bf->list, &bf_head);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index eef370bd..bf3d25b 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -474,6 +474,21 @@
return 0;
}
+/*
+ * Some users have reported their EEPROM programmed with
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
+ */
+static void ath_regd_sanitize(struct ath_regulatory *reg)
+{
+ if (reg->current_rd != COUNTRY_ERD_FLAG)
+ return;
+ printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
+ reg->current_rd = 0x64;
+}
+
int
ath_regd_init(struct ath_regulatory *reg,
struct wiphy *wiphy,
@@ -486,6 +501,8 @@
if (!reg)
return -EINVAL;
+ ath_regd_sanitize(reg);
+
printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
if (!ath_regd_is_eeprom_valid(reg)) {
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f580c28..4044806 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,6 +648,7 @@
u8 nr_devs;
bool radiotap_enabled;
+ bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode).
* This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6456afe..e71c8d9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3497,8 +3497,8 @@
if (phy->ops->set_rx_antenna)
phy->ops->set_rx_antenna(dev, antenna);
- if (!!conf->radio_enabled != phy->radio_on) {
- if (conf->radio_enabled) {
+ if (wl->radio_enabled != phy->radio_on) {
+ if (wl->radio_enabled) {
b43_software_rfkill(dev, false);
b43info(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable) {
@@ -4339,6 +4339,7 @@
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
+ wl->radio_enabled = 1;
mutex_lock(&wl->mutex);
@@ -4378,6 +4379,7 @@
if (b43_status(dev) >= B43_STAT_STARTED)
b43_wireless_core_stop(dev);
b43_wireless_core_exit(dev);
+ wl->radio_enabled = 0;
mutex_unlock(&wl->mutex);
cancel_work_sync(&(wl->txpower_adjust_work));
@@ -4560,6 +4562,7 @@
B43_WARN_ON(1);
dev->phy.gmode = have_2ghz_phy;
+ dev->phy.radio_on = 1;
tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 3cfc303..6c3a749 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -35,6 +35,7 @@
static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = {
PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
+ PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
PCMCIA_DEVICE_NULL,
};
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 77fda14..038baa8 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -607,6 +607,7 @@
u8 nr_devs;
bool radiotap_enabled;
+ bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode).
* This beacon stuff is protected by the irq_lock. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e5136fb..c4973c1 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2689,8 +2689,8 @@
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
- if (!!conf->radio_enabled != phy->radio_on) {
- if (conf->radio_enabled) {
+ if (wl->radio_enabled != phy->radio_on) {
+ if (wl->radio_enabled) {
b43legacy_radio_turn_on(dev);
b43legacyinfo(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable)
@@ -3441,6 +3441,7 @@
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
wl->beacon_templates_virgin = 1;
+ wl->radio_enabled = 1;
mutex_lock(&wl->mutex);
@@ -3479,6 +3480,7 @@
if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
b43legacy_wireless_core_exit(dev);
+ wl->radio_enabled = 0;
mutex_unlock(&wl->mutex);
}
@@ -3620,6 +3622,7 @@
have_bphy = 1;
dev->phy.gmode = (have_gphy || have_bphy);
+ dev->phy.radio_on = 1;
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index fbb3a57..2de6471 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -112,7 +112,7 @@
#define IWL_TX_FIFO_NONE 7
/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES 4
+#define IWL39_MIN_NUM_QUEUES 4
#define IEEE80211_DATA_LEN 2304
#define IEEE80211_4ADDR_LEN 30
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6d1519e..355f50e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2675,12 +2675,10 @@
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
- int mode = priv->power_data.user_power_setting;
int level = priv->power_data.power_mode;
char *p = buf;
- p += sprintf(p, "INDEX:%d\t", level);
- p += sprintf(p, "USER:%d\n", mode);
+ p += sprintf(p, "%d\n", level);
return p - buf + 1;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 6ab0716..18b135f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1332,6 +1332,9 @@
hw->wiphy->custom_regulatory = true;
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 11e08c0..ca00cc8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -308,18 +308,18 @@
return -ENODATA;
}
+ ptr = priv->eeprom;
+ if (!ptr) {
+ IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+ return -ENOMEM;
+ }
+
/* 4 characters for byte 0xYY */
buf = kzalloc(buf_size, GFP_KERNEL);
if (!buf) {
IWL_ERR(priv, "Can not allocate Buffer\n");
return -ENOMEM;
}
-
- ptr = priv->eeprom;
- if (!ptr) {
- IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
- return -ENOMEM;
- }
pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
? "OTP" : "EEPROM");
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index e2d620f..650e20a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -258,8 +258,10 @@
#define IWL_TX_FIFO_HCCA_2 6
#define IWL_TX_FIFO_NONE 7
-/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES 4
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IWL_MIN_NUM_QUEUES 10
/* Power management (not Tx power) structures */
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 2addf73..ffd5c61 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -566,6 +566,8 @@
unsigned long flags;
spin_lock_irqsave(&priv->sta_lock, flags);
+ IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+ keyconf->keyidx);
if (!test_and_clear_bit(keyconf->keyidx, &priv->ucode_key_table))
IWL_ERR(priv, "index %d not used in uCode key table.\n",
@@ -573,6 +575,11 @@
priv->default_wep_key--;
memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_WEP(priv, "Not sending REPLY_WEPKEY command due to RFKILL.\n");
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
ret = iwl_send_static_wepkey_cmd(priv, 1);
IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
keyconf->keyidx, ret);
@@ -853,6 +860,11 @@
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
spin_unlock_irqrestore(&priv->sta_lock, flags);
return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 85ae7a6..2e89040 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -720,8 +720,6 @@
goto drop_unlock;
}
- spin_unlock_irqrestore(&priv->lock, flags);
-
hdr_len = ieee80211_hdrlen(fc);
/* Find (or create) index into station table for destination station */
@@ -729,7 +727,7 @@
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
hdr->addr1);
- goto drop;
+ goto drop_unlock;
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -750,14 +748,17 @@
txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
}
- priv->stations[sta_id].tid[tid].tfds_in_queue++;
}
txq = &priv->txq[txq_id];
q = &txq->q;
txq->swq_id = swq_id;
- spin_lock_irqsave(&priv->lock, flags);
+ if (unlikely(iwl_queue_space(q) < q->high_mark))
+ goto drop_unlock;
+
+ if (ieee80211_is_data_qos(fc))
+ priv->stations[sta_id].tid[tid].tfds_in_queue++;
/* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
@@ -872,7 +873,8 @@
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
- priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
le16_to_cpu(tx_cmd->len));
pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
@@ -901,7 +903,6 @@
drop_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
-drop:
return -1;
}
EXPORT_SYMBOL(iwl_tx_skb);
@@ -1170,6 +1171,8 @@
IWL_ERR(priv, "Start AGG on invalid station\n");
return -ENXIO;
}
+ if (unlikely(tid >= MAX_TID_COUNT))
+ return -EINVAL;
if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index cb9bd4c..5238433 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3643,12 +3643,10 @@
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
- int mode = priv->power_data.user_power_setting;
int level = priv->power_data.power_mode;
char *p = buf;
- p += sprintf(p, "INDEX:%d\t", level);
- p += sprintf(p, "USER:%d\n", mode);
+ p += sprintf(p, "%d\n", level);
return p - buf + 1;
}
@@ -3970,6 +3968,9 @@
hw->wiphy->custom_regulatory = true;
+ /* Firmware does not support this */
+ hw->wiphy->disable_beacon_hints = true;
+
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
@@ -4020,10 +4021,10 @@
SET_IEEE80211_DEV(hw, &pdev->dev);
if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
- (iwl3945_mod_params.num_of_queues < IWL_MIN_NUM_QUEUES)) {
+ (iwl3945_mod_params.num_of_queues < IWL39_MIN_NUM_QUEUES)) {
IWL_ERR(priv,
"invalid queues_num, should be between %d and %d\n",
- IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
+ IWL39_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
err = -EINVAL;
goto out_ieee80211_free_hw;
}
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index 1eccb6d..030401d 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -4,6 +4,15 @@
depends on CFG80211
select WIRELESS_EXT
select FW_LOADER
+ help
+ The Intel Wireless Multicomm 3200 hardware is a combo
+ card with GPS, Bluetooth, WiMax and 802.11 radios. It
+ runs over SDIO and is typically found on Moorestown
+ based platform. This driver takes care of the 802.11
+ part, which is a fullmac one.
+
+ If you choose to build it as a module, it'll be called
+ iwmc3200wifi.ko.
config IWM_DEBUG
bool "Enable full debugging output in iwmc3200wifi"
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 834a7f5..e2334d1 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -220,6 +220,7 @@
eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
if (IS_ERR(eeprom_rxiq)) {
IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+ kfree(rxiq);
return PTR_ERR(eeprom_rxiq);
}
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index aaa20c6..bf294e4 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -106,10 +106,8 @@
int ret = 0;
wdev = iwm_wdev_alloc(sizeof_bus, dev);
- if (!wdev) {
- dev_err(dev, "no memory for wireless device instance\n");
- return ERR_PTR(-ENOMEM);
- }
+ if (IS_ERR(wdev))
+ return wdev;
iwm = wdev_to_iwm(wdev);
iwm->bus_ops = if_ops;
@@ -151,8 +149,8 @@
return;
free_netdev(iwm_to_ndev(iwm));
- iwm_wdev_free(iwm);
iwm_priv_deinit(iwm);
+ iwm_wdev_free(iwm);
}
int iwm_if_add(struct iwm_priv *iwm)
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
index 9a5408e..5c69681 100644
--- a/drivers/net/wireless/libertas/11d.c
+++ b/drivers/net/wireless/libertas/11d.c
@@ -47,7 +47,7 @@
{
u8 i;
- for (i = 0; region[i] && i < COUNTRY_CODE_LEN; i++)
+ for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
region[i] = toupper(region[i]);
for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index b9b3741..d699737 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -1,6 +1,7 @@
/* Copyright (C) 2006, Red Hat, Inc. */
#include <linux/types.h>
+#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
#include <linux/if_arp.h>
@@ -43,21 +44,21 @@
u16 *rates_size)
{
u8 *card_rates = lbs_bg_rates;
- size_t num_card_rates = sizeof(lbs_bg_rates);
int ret = 0, i, j;
- u8 tmp[30];
+ u8 tmp[(ARRAY_SIZE(lbs_bg_rates) - 1) * (*rates_size - 1)];
size_t tmp_size = 0;
/* For each rate in card_rates that exists in rate1, copy to tmp */
- for (i = 0; card_rates[i] && (i < num_card_rates); i++) {
- for (j = 0; rates[j] && (j < *rates_size); j++) {
+ for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && card_rates[i]; i++) {
+ for (j = 0; j < *rates_size && rates[j]; j++) {
if (rates[j] == card_rates[i])
tmp[tmp_size++] = card_rates[i];
}
}
lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size);
- lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates);
+ lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates,
+ ARRAY_SIZE(lbs_bg_rates));
lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
@@ -69,10 +70,7 @@
lbs_pr_alert("Previously set fixed data rate %#x isn't "
"compatible with the network.\n", priv->cur_rate);
ret = -1;
- goto done;
}
- ret = 0;
-
done:
memset(rates, 0, *rates_size);
*rates_size = min_t(int, tmp_size, *rates_size);
@@ -322,7 +320,7 @@
rates = (struct mrvl_ie_rates_param_set *) pos;
rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
memcpy(&rates->rates, &bss->rates, MAX_RATES);
- tmplen = MAX_RATES;
+ tmplen = min_t(u16, ARRAY_SIZE(rates->rates), MAX_RATES);
if (get_common_rates(priv, rates->rates, &tmplen)) {
ret = -1;
goto done;
@@ -598,7 +596,7 @@
/* Copy Data rates from the rates recorded in scan response */
memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates));
- ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES);
+ ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), MAX_RATES);
memcpy(cmd.bss.rates, bss->rates, ratesize);
if (get_common_rates(priv, cmd.bss.rates, &ratesize)) {
lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n");
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 01db705..6850981 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -135,8 +135,14 @@
/* Clamp region code to 8-bit since FW spec indicates that it should
* only ever be 8-bit, even though the field size is 16-bit. Some firmware
* returns non-zero high 8 bits here.
+ *
+ * Firmware version 4.0.102 used in CF8381 has region code shifted. We
+ * need to check for this problem and handle it properly.
*/
- priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
+ if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4)
+ priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF;
+ else
+ priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
/* use the region code to search for the index */
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 48da157..72f3479 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -234,6 +234,8 @@
/** Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
+/** FW definition from Marvell v4 */
+#define MRVL_FW_V4 (0x04)
/** FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
/** FW definition from Marvell v10 */
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 601b542..6c95af3 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -5,6 +5,7 @@
* for sending scan commands to the firmware.
*/
#include <linux/types.h>
+#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <asm/unaligned.h>
@@ -876,7 +877,7 @@
iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = 0;
- for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) {
+ for (j = 0; j < ARRAY_SIZE(bss->rates) && bss->rates[j]; j++) {
/* Bit rate given in 500 kb/s units */
iwe.u.bitrate.value = bss->rates[j] * 500000;
current_val = iwe_stream_add_value(info, start, current_val,
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index e789c6e..7916ca3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -418,6 +418,7 @@
continue;
if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+ !data->channel || !data2->channel ||
data->channel->center_freq != data2->channel->center_freq ||
!(data->group & data2->group))
continue;
@@ -708,7 +709,7 @@
static void mac80211_hwsim_free(void)
{
struct list_head tmplist, *i, *tmp;
- struct mac80211_hwsim_data *data;
+ struct mac80211_hwsim_data *data, *tmpdata;
INIT_LIST_HEAD(&tmplist);
@@ -717,7 +718,7 @@
list_move(i, &tmplist);
spin_unlock_bh(&hwsim_radio_lock);
- list_for_each_entry(data, &tmplist, list) {
+ list_for_each_entry_safe(data, tmpdata, &tmplist, list) {
debugfs_remove(data->debugfs_group);
debugfs_remove(data->debugfs_ps);
debugfs_remove(data->debugfs);
@@ -1166,8 +1167,8 @@
{
printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n");
- unregister_netdev(hwsim_mon);
mac80211_hwsim_free();
+ unregister_netdev(hwsim_mon);
}
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 345593c..a370e51 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -2521,6 +2521,8 @@
.ndo_start_xmit = orinoco_xmit,
.ndo_set_multicast_list = orinoco_set_multicast_list,
.ndo_change_mtu = orinoco_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = orinoco_tx_timeout,
.ndo_get_stats = orinoco_get_stats,
};
@@ -2555,7 +2557,6 @@
priv->wireless_data.spy_data = &priv->spy_data;
dev->wireless_data = &priv->wireless_data;
#endif
- /* we use the default eth_mac_addr for setting the MAC addr */
/* Reserve space in skb for the SNAP header */
dev->hard_header_len += ENCAPS_OVERHEAD;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd1..22ca122 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -823,30 +823,30 @@
struct p54_tx_info *range;
unsigned long flags;
- if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
+ if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
return;
- /* There used to be a check here to see if the SKB was on the
- * TX queue or not. This can never happen because all SKBs we
- * see here successfully went through p54_assign_address()
- * which means the SKB is on the ->tx_queue.
+ /*
+ * don't try to free an already unlinked skb
*/
+ if (unlikely((!skb->next) || (!skb->prev)))
+ return;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
info = IEEE80211_SKB_CB(skb);
range = (void *)info->rate_driver_data;
- if (!skb_queue_is_first(&priv->tx_queue, skb)) {
+ if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
+ ni = IEEE80211_SKB_CB(skb->prev);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
- if (!skb_queue_is_last(&priv->tx_queue, skb)) {
+ if (skb->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
+ ni = IEEE80211_SKB_CB(skb->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
__skb_unlink(skb, &priv->tx_queue);
@@ -864,13 +864,15 @@
unsigned long flags;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
if (hdr->req_id == req_id) {
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return entry;
}
+ entry = entry->next;
}
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return NULL;
@@ -888,33 +890,36 @@
int count, idx;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = (struct sk_buff *) priv->tx_queue.next;
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
struct p54_tx_data *entry_data;
unsigned int pad = 0, frame_len;
range = (void *)info->rate_driver_data;
- if (range->start_addr != addr)
+ if (range->start_addr != addr) {
+ entry = entry->next;
continue;
+ }
- if (!skb_queue_is_last(&priv->tx_queue, entry)) {
+ if (entry->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
- entry));
+ ni = IEEE80211_SKB_CB(entry->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
__skb_unlink(entry, &priv->tx_queue);
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
frame_len = entry->len;
entry_hdr = (struct p54_hdr *) entry->data;
entry_data = (struct p54_tx_data *) entry_hdr->data;
- priv->tx_stats[entry_data->hw_queue].len--;
+ if (priv->tx_stats[entry_data->hw_queue].len)
+ priv->tx_stats[entry_data->hw_queue].len--;
priv->stats.dot11ACKFailureCount += payload->tries - 1;
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
/*
* Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are
@@ -1164,21 +1169,23 @@
}
}
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
range = (void *)info->rate_driver_data;
hole_size = range->start_addr - last_addr;
if (!target_skb && hole_size >= len) {
- target_skb = skb_queue_prev(&priv->tx_queue, entry);
+ target_skb = entry->prev;
hole_size -= len;
target_addr = last_addr;
}
largest_hole = max(largest_hole, hole_size);
last_addr = range->end_addr;
+ entry = entry->next;
}
if (!target_skb && priv->rx_end - last_addr >= len) {
- target_skb = skb_peek_tail(&priv->tx_queue);
+ target_skb = priv->tx_queue.prev;
largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
if (!skb_queue_empty(&priv->tx_queue)) {
info = IEEE80211_SKB_CB(target_skb);
@@ -2084,6 +2091,7 @@
static void p54_stop(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
+ struct sk_buff *skb;
mutex_lock(&priv->conf_mutex);
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
@@ -2098,7 +2106,8 @@
p54_tx_cancel(dev, priv->cached_beacon);
priv->stop(dev);
- skb_queue_purge(&priv->tx_queue);
+ while ((skb = skb_dequeue(&priv->tx_queue)))
+ kfree_skb(skb);
priv->cached_beacon = NULL;
priv->tsf_high32 = priv->tsf_low32 = 0;
mutex_unlock(&priv->conf_mutex);
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 83116ba..72c7dbd 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -635,7 +635,7 @@
hw = p54_init_common(sizeof(*priv));
if (!hw) {
- dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+ dev_err(&spi->dev, "could not alloc ieee80211_hw");
return -ENOMEM;
}
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b10b038..698b11b 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2427,11 +2427,10 @@
#ifdef PCMCIA_DEBUG
if (pc_debug > 3) {
- int i;
- printk(KERN_DEBUG "skb->data before untranslate");
- for (i = 0; i < 64; i++)
- printk("%02x ", skb->data[i]);
- printk("\n" KERN_DEBUG
+ print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
+ DUMP_PREFIX_NONE, 16, 1,
+ skb->data, 64, true);
+ printk(KERN_DEBUG
"type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
psnap->org[0], psnap->org[1], psnap->org[2]);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 66daf68..ce75426 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1550,7 +1550,9 @@
rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®);
rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
+ if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
+ rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
return -ENODEV;
}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index b442535..cf9f899 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -208,11 +208,12 @@
{
struct rtl8187_priv *priv = dev->priv;
- rtl8187_unregister_led(&priv->led_tx);
/* turn the LED off before exiting */
queue_delayed_work(dev->workqueue, &priv->led_off, 0);
cancel_delayed_work_sync(&priv->led_off);
+ cancel_delayed_work_sync(&priv->led_on);
rtl8187_unregister_led(&priv->led_rx);
+ rtl8187_unregister_led(&priv->led_tx);
}
#endif /* def CONFIG_RTL8187_LED */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 6af7064..c6d3006 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3556,17 +3556,8 @@
cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */
#ifdef DEBUG_I82593_SHOW
- {
- u_char *c = (u_char *) &cfblk;
- int i;
- printk(KERN_DEBUG "wavelan_cs: config block:");
- for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
- {
- if((i % 16) == 0) printk("\n" KERN_DEBUG);
- printk("%02x ", *c);
- }
- printk("\n");
- }
+ print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
+ 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
#endif
/* Copy the config block to the i82593 */
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 40b07b9..3bd3c77 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -698,7 +698,7 @@
&& !mac->pass_ctrl)
return 0;
- fc = *(__le16 *)buffer;
+ fc = get_unaligned((__le16*)buffer);
need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 14a19ba..0e6e446 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -38,7 +38,6 @@
/* ZD1211 */
{ USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 },
- { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 },
@@ -61,6 +60,7 @@
{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
+ { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
@@ -87,6 +87,7 @@
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 3c7a505..a075801 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -109,7 +109,7 @@
/* These identify the driver base version and may not be removed. */
static const char version[] __devinitconst =
KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
+ " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
@@ -700,12 +700,15 @@
int i;
printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(" %8.8x", yp->rx_ring[i].result_status);
- printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring);
+ printk(KERN_CONT " %8.8x",
+ yp->rx_ring[i].result_status);
+ printk(KERN_CONT "\n");
+ printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
- yp->tx_ring[i].result_status);
- printk("\n");
+ printk(KERN_CONT " %4.4x /%8.8x",
+ yp->tx_status[i].tx_errs,
+ yp->tx_ring[i].result_status);
+ printk(KERN_CONT "\n");
}
/* If the hardware is found to hang regularly, we will update the code
@@ -1216,20 +1219,20 @@
#if defined(__i386__)
if (yellowfin_debug > 2) {
- printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n",
+ printk(KERN_DEBUG" Tx ring at %8.8llx:\n",
(unsigned long long)yp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE*2; i++)
- printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+ printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n",
i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
- printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n",
+ printk(KERN_DEBUG " Rx ring %8.8llx:\n",
(unsigned long long)yp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index aee967d..bacaa53 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -9,6 +9,10 @@
* out of the OpenFirmware device tree and using it to populate an mii_bus.
*/
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/err.h>
#include <linux/phy.h>
#include <linux/of.h>
#include <linux/of_mdio.h>
@@ -137,3 +141,41 @@
return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
}
EXPORT_SYMBOL(of_phy_connect);
+
+/**
+ * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
+ * @dev: pointer to net_device claiming the phy
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * This function is a temporary stop-gap and will be removed soon. It is
+ * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers. Do
+ * not call this function from new drivers.
+ */
+struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+ void (*hndlr)(struct net_device *),
+ phy_interface_t iface)
+{
+ struct device_node *net_np;
+ char bus_id[MII_BUS_ID_SIZE + 3];
+ struct phy_device *phy;
+ const u32 *phy_id;
+ int sz;
+
+ if (!dev->dev.parent)
+ return NULL;
+
+ net_np = dev_archdata_get_node(&dev->dev.parent->archdata);
+ if (!net_np)
+ return NULL;
+
+ phy_id = of_get_property(net_np, "fixed-link", &sz);
+ if (!phy_id || sz < sizeof(*phy_id))
+ return NULL;
+
+ sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+
+ phy = phy_connect(dev, bus_id, hndlr, 0, iface);
+ return IS_ERR(phy) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect_fixed_link);
diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c
index e1f6ce0..3c2270a 100644
--- a/drivers/oprofile/oprofile_stats.c
+++ b/drivers/oprofile/oprofile_stats.c
@@ -33,6 +33,7 @@
atomic_set(&oprofile_stats.sample_lost_no_mm, 0);
atomic_set(&oprofile_stats.sample_lost_no_mapping, 0);
atomic_set(&oprofile_stats.event_lost_overflow, 0);
+ atomic_set(&oprofile_stats.bt_lost_no_mapping, 0);
}
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 5d610cb..a45b0c0 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -70,7 +70,6 @@
#undef CCIO_COLLECT_STATS
#endif
-#include <linux/proc_fs.h>
#include <asm/runway.h> /* for proc_runway_root */
#ifdef DEBUG_CCIO_INIT
@@ -1134,7 +1133,7 @@
.llseek = seq_lseek,
.release = single_release,
};
-#endif
+#endif /* CONFIG_PROC_FS */
/**
* ccio_find_ioc - Find the ioc in the ioc_list
@@ -1568,14 +1567,15 @@
/* if this fails, no I/O cards will work, so may as well bug */
BUG_ON(dev->dev.platform_data == NULL);
HBA_DATA(dev->dev.platform_data)->iommu = ioc;
-
+
+#ifdef CONFIG_PROC_FS
if (ioc_count == 0) {
proc_create(MODULE_NAME, 0, proc_runway_root,
&ccio_proc_info_fops);
proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root,
&ccio_proc_bitmap_fops);
}
-
+#endif
ioc_count++;
parisc_has_iommu();
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 52ae0b1..d69bde6 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -353,7 +353,7 @@
return 0;
}
-static struct hw_interrupt_type dino_interrupt_type = {
+static struct irq_chip dino_interrupt_type = {
.typename = "GSC-PCI",
.startup = dino_startup_irq,
.shutdown = dino_disable_irq,
@@ -614,7 +614,7 @@
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
- pci_assign_resource(bus->self, i);
+ WARN_ON(pci_assign_resource(bus->self, i));
DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
@@ -1019,22 +1019,22 @@
** It's not used to avoid chicken/egg problems
** with configuration accessor functions.
*/
- bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
- &dino_cfg_ops, NULL);
+ dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
+ dino_current_bus, &dino_cfg_ops, NULL);
+
if(bus) {
- pci_bus_add_devices(bus);
/* This code *depends* on scanning being single threaded
* if it isn't, this global bus number count will fail
*/
dino_current_bus = bus->subordinate + 1;
pci_bus_assign_resources(bus);
+ pci_bus_add_devices(bus);
} else {
- printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+ printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
dev_name(&dev->dev), dino_current_bus);
/* increment the bus number in case of duplicates */
dino_current_bus++;
}
- dino_dev->hba.hba_bus = bus;
return 0;
}
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 5b89f40..5122074 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -188,7 +188,7 @@
return 0;
}
-static struct hw_interrupt_type eisa_interrupt_type = {
+static struct irq_chip eisa_interrupt_type = {
.typename = "EISA",
.startup = eisa_startup_irq,
.shutdown = eisa_disable_irq,
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 685d94e..8c0b26e9 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -55,7 +55,7 @@
ssize_t ret;
int i;
- if (*ppos >= HPEE_MAX_LENGTH)
+ if (*ppos < 0 || *ppos >= HPEE_MAX_LENGTH)
return 0;
count = *ppos + count < HPEE_MAX_LENGTH ? count : HPEE_MAX_LENGTH - *ppos;
diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c
index c709ecc..0be1d50 100644
--- a/drivers/parisc/eisa_enumerator.c
+++ b/drivers/parisc/eisa_enumerator.c
@@ -101,7 +101,7 @@
printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
result = request_resource(mem_parent, res);
if (result < 0) {
- printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
return result;
}
}
@@ -191,7 +191,7 @@
printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end);
result = request_resource(io_parent, res);
if (result < 0) {
- printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
return result;
}
}
@@ -224,7 +224,7 @@
case HPEE_PORT_INIT_WIDTH_BYTE:
s=1;
if (c & HPEE_PORT_INIT_MASK) {
- printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
outb((inb(get_16(buf+len+1) &
get_8(buf+len+3)) |
get_8(buf+len+4)), get_16(buf+len+1));
@@ -249,7 +249,7 @@
case HPEE_PORT_INIT_WIDTH_DWORD:
s=4;
if (c & HPEE_PORT_INIT_MASK) {
- printk("\n" KERN_WARNING "port_init: unverified mask attribute\n");
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
outl((inl(get_16(buf+len+1) &
get_32(buf+len+3)) |
get_32(buf+len+7)), get_16(buf+len+1));
@@ -259,7 +259,7 @@
break;
default:
- printk("\n" KERN_ERR "Invalid port init word %02x\n", c);
+ printk(KERN_ERR "Invalid port init word %02x\n", c);
return 0;
}
@@ -297,7 +297,7 @@
/* just skip past the type field */
len = get_8(buf);
if (len > 80) {
- printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
+ printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
}
return 1+len;
@@ -398,7 +398,7 @@
}
if (p0 + function_len < pos) {
- printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match "
+ printk(KERN_ERR "eisa_enumerator: function %d length mis-match "
"got %d, expected %d\n",
num_func, pos-p0, function_len);
res=-1;
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index d336329..647adc9 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -148,7 +148,7 @@
return 0;
}
-static struct hw_interrupt_type gsc_asic_interrupt_type = {
+static struct irq_chip gsc_asic_interrupt_type = {
.typename = "GSC-ASIC",
.startup = gsc_asic_startup_irq,
.shutdown = gsc_asic_disable_irq,
@@ -158,7 +158,7 @@
.end = no_end_irq,
};
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data)
+int gsc_assign_irq(struct irq_chip *type, void *data)
{
static int irq = GSC_IRQ_BASE;
struct irq_desc *desc;
diff --git a/drivers/parisc/gsc.h b/drivers/parisc/gsc.h
index 762a1ba..b9d7bfb 100644
--- a/drivers/parisc/gsc.h
+++ b/drivers/parisc/gsc.h
@@ -38,7 +38,7 @@
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic);
int gsc_alloc_irq(struct gsc_irq *dev); /* dev needs an irq */
int gsc_claim_irq(struct gsc_irq *dev, int irq); /* dev needs this irq */
-int gsc_assign_irq(struct hw_interrupt_type *type, void *data);
+int gsc_assign_irq(struct irq_chip *type, void *data);
int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit);
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose)(struct parisc_device *child, void *ctrl));
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 1385641..815db17 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -62,7 +62,8 @@
}
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%x\n", dev->hpa.start);
+ printk(KERN_INFO "Found GeckoBoa at 0x%llx\n",
+ (unsigned long long) dev->hpa.start);
card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
@@ -73,8 +74,10 @@
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
- printk(KERN_ERR "%s: failed to claim HP-PB bus space (%08x, %08x)\n",
- __FILE__, card->mmio_region.start, card->mmio_region.end);
+ printk(KERN_ERR "%s: failed to claim HP-PB "
+ "bus space (0x%08llx, 0x%08llx)\n",
+ __FILE__, (unsigned long long) card->mmio_region.start,
+ (unsigned long long) card->mmio_region.end);
}
return 0;
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 4a9cc92..88e3335 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -729,7 +729,7 @@
}
#endif
-static struct hw_interrupt_type iosapic_interrupt_type = {
+static struct irq_chip iosapic_interrupt_type = {
.typename = "IO-SAPIC-level",
.startup = iosapic_startup_irq,
.shutdown = iosapic_disable_irq,
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 59fbbf1..3aeb327 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -980,28 +980,38 @@
lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
{
unsigned long bytecnt;
- pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; /* PA_VIEW */
- pdc_pat_cell_mod_maddr_block_t io_pdc_cell; /* IO_VIEW */
long io_count;
long status; /* PDC return status */
long pa_count;
+ pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */
+ pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */
int i;
+ pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+ if (!pa_pdc_cell)
+ return;
+
+ io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
+ if (!io_pdc_cell) {
+ kfree(pa_pdc_cell);
+ return;
+ }
+
/* return cell module (IO view) */
status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
- PA_VIEW, & pa_pdc_cell);
- pa_count = pa_pdc_cell.mod[1];
+ PA_VIEW, pa_pdc_cell);
+ pa_count = pa_pdc_cell->mod[1];
status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
- IO_VIEW, &io_pdc_cell);
- io_count = io_pdc_cell.mod[1];
+ IO_VIEW, io_pdc_cell);
+ io_count = io_pdc_cell->mod[1];
/* We've already done this once for device discovery...*/
if (status != PDC_OK) {
panic("pdc_pat_cell_module() call failed for LBA!\n");
}
- if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) {
+ if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
}
@@ -1016,8 +1026,8 @@
} *p, *io;
struct resource *r;
- p = (void *) &(pa_pdc_cell.mod[2+i*3]);
- io = (void *) &(io_pdc_cell.mod[2+i*3]);
+ p = (void *) &(pa_pdc_cell->mod[2+i*3]);
+ io = (void *) &(io_pdc_cell->mod[2+i*3]);
/* Convert the PAT range data to PCI "struct resource" */
switch(p->type & 0xff) {
@@ -1096,6 +1106,9 @@
break;
}
}
+
+ kfree(pa_pdc_cell);
+ kfree(io_pdc_cell);
}
#else
/* keep compiler from complaining about missing declarations */
@@ -1509,10 +1522,6 @@
lba_bus = lba_dev->hba.hba_bus =
pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
cfg_ops, NULL);
- if (lba_bus) {
- lba_next_bus = lba_bus->subordinate + 1;
- pci_bus_add_devices(lba_bus);
- }
/* This is in lieu of calling pci_assign_unassigned_resources() */
if (is_pdc_pat()) {
@@ -1533,7 +1542,6 @@
}
pci_enable_bridges(lba_bus);
-
/*
** Once PCI register ops has walked the bus, access to config
** space is restricted. Avoids master aborts on config cycles.
@@ -1543,6 +1551,11 @@
lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
}
+ if (lba_bus) {
+ lba_next_bus = lba_bus->subordinate + 1;
+ pci_bus_add_devices(lba_bus);
+ }
+
/* Whew! Finally done! Tell services we got this one covered. */
return 0;
}
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index f9f9a5f..13a64bc 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -370,7 +370,7 @@
if (!i) /* entry is not ready */
return -ENODATA;
- for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
+ for (i = 0; i < 6 && devpath->layers[i]; i++)
out += sprintf(out, "%u ", devpath->layers[i]);
out += sprintf(out, "\n");
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index d46dd57..123d8fe 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2057,6 +2057,7 @@
r->start = (base & ~1UL) | PCI_F_EXTEND;
size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
r->end = r->start + size;
+ r->flags = IORESOURCE_MEM;
}
}
@@ -2093,4 +2094,5 @@
size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
r->start += rope * (size + 1); /* adjust base for this rope */
r->end = r->start + size;
+ r->flags = IORESOURCE_MEM;
}
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 33e5ade..675f04e 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -325,7 +325,7 @@
return 0;
}
-static struct hw_interrupt_type superio_interrupt_type = {
+static struct irq_chip superio_interrupt_type = {
.typename = SUPERIO,
.startup = superio_startup_irq,
.shutdown = superio_disable_irq,
@@ -434,8 +434,8 @@
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */),
- 0 /* shared irq flags */ )
+ NULL /*struct pci_dev* */,
+ 0 /* shared irq flags */))
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 1032d5f..2597145 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2907,6 +2907,7 @@
netmos_9755,
netmos_9805,
netmos_9815,
+ netmos_9901,
quatech_sppxp100,
};
@@ -2987,7 +2988,7 @@
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
/* netmos_9805 */ { 1, { { 0, -1 }, } },
/* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
-
+ /* netmos_9901 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
};
@@ -3089,6 +3090,8 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+ 0xA000, 0x2000, 0, 0, netmos_9901 },
/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index a5b9f6a..d703e73 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -32,7 +32,6 @@
#include <linux/pci_hotplug.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <asm/atomic.h>
#include <linux/delay.h>
#include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 2fa47af..0ff689a 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -34,7 +34,6 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/wait.h>
-#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c
index 8450f4a..e6089bd 100644
--- a/drivers/pci/hotplug/cpqphp_sysfs.c
+++ b/drivers/pci/hotplug/cpqphp_sysfs.c
@@ -33,6 +33,7 @@
#include <linux/workqueue.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
+#include <linux/smp_lock.h>
#include <linux/debugfs.h>
#include "cpqphp.h"
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 8445804..5c5043f 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -555,6 +555,8 @@
* @slot: pointer to the &struct hotplug_slot to register
* @devnr: device number
* @name: name registered with kobject core
+ * @owner: caller module owner
+ * @mod_name: caller module name
*
* Registers a hotplug slot with the pci hotplug subsystem, which will allow
* userspace interaction to the slot.
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index ff40345..8aab8ed 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -30,7 +30,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "../pci.h"
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index a4494d7..8aebe1e9 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -90,11 +90,10 @@
static DEFINE_MUTEX(sn_hotplug_mutex);
-static ssize_t path_show (struct hotplug_slot *bss_hotplug_slot,
- char *buf)
+static ssize_t path_show(struct pci_slot *pci_slot, char *buf)
{
int retval = -ENOENT;
- struct slot *slot = bss_hotplug_slot->private;
+ struct slot *slot = pci_slot->hotplug->private;
if (!slot)
return retval;
@@ -103,7 +102,7 @@
return retval;
}
-static struct hotplug_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
+static struct pci_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
{
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index e53eacd..2314ad7 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,7 +39,6 @@
#include <linux/sysdev.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
-#include <asm/e820.h>
#include "pci.h"
#define ROOT_SIZE VTD_PAGE_SIZE
@@ -57,14 +56,32 @@
#define MAX_AGAW_WIDTH 64
#define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
+#define DOMAIN_MAX_PFN(gaw) ((((u64)1) << (gaw-VTD_PAGE_SHIFT)) - 1)
#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT)
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
-#ifndef PHYSICAL_PAGE_MASK
-#define PHYSICAL_PAGE_MASK PAGE_MASK
-#endif
+
+/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
+ are never going to work. */
+static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
+{
+ return dma_pfn >> (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+
+static inline unsigned long mm_to_dma_pfn(unsigned long mm_pfn)
+{
+ return mm_pfn << (PAGE_SHIFT - VTD_PAGE_SHIFT);
+}
+static inline unsigned long page_to_dma_pfn(struct page *pg)
+{
+ return mm_to_dma_pfn(page_to_pfn(pg));
+}
+static inline unsigned long virt_to_dma_pfn(void *p)
+{
+ return page_to_dma_pfn(virt_to_page(p));
+}
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
@@ -205,12 +222,17 @@
static inline u64 dma_pte_addr(struct dma_pte *pte)
{
- return (pte->val & VTD_PAGE_MASK);
+#ifdef CONFIG_64BIT
+ return pte->val & VTD_PAGE_MASK;
+#else
+ /* Must have a full atomic 64-bit read */
+ return __cmpxchg64(pte, 0ULL, 0ULL) & VTD_PAGE_MASK;
+#endif
}
-static inline void dma_set_pte_addr(struct dma_pte *pte, u64 addr)
+static inline void dma_set_pte_pfn(struct dma_pte *pte, unsigned long pfn)
{
- pte->val |= (addr & VTD_PAGE_MASK);
+ pte->val |= (uint64_t)pfn << VTD_PAGE_SHIFT;
}
static inline bool dma_pte_present(struct dma_pte *pte)
@@ -218,6 +240,11 @@
return (pte->val & 3) != 0;
}
+static inline int first_pte_in_page(struct dma_pte *pte)
+{
+ return !((unsigned long)pte & ~VTD_PAGE_MASK);
+}
+
/*
* This domain is a statically identity mapping domain.
* 1. This domain creats a static 1:1 mapping to all usable memory.
@@ -245,7 +272,6 @@
struct iova_domain iovad; /* iova's that belong to this domain */
struct dma_pte *pgd; /* virtual address */
- spinlock_t mapping_lock; /* page table lock */
int gaw; /* max guest address width */
/* adjusted guest address width, 0 is level 2 30-bit */
@@ -649,80 +675,78 @@
static inline unsigned int level_to_offset_bits(int level)
{
- return (12 + (level - 1) * LEVEL_STRIDE);
+ return (level - 1) * LEVEL_STRIDE;
}
-static inline int address_level_offset(u64 addr, int level)
+static inline int pfn_level_offset(unsigned long pfn, int level)
{
- return ((addr >> level_to_offset_bits(level)) & LEVEL_MASK);
+ return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
}
-static inline u64 level_mask(int level)
+static inline unsigned long level_mask(int level)
{
- return ((u64)-1 << level_to_offset_bits(level));
+ return -1UL << level_to_offset_bits(level);
}
-static inline u64 level_size(int level)
+static inline unsigned long level_size(int level)
{
- return ((u64)1 << level_to_offset_bits(level));
+ return 1UL << level_to_offset_bits(level);
}
-static inline u64 align_to_level(u64 addr, int level)
+static inline unsigned long align_to_level(unsigned long pfn, int level)
{
- return ((addr + level_size(level) - 1) & level_mask(level));
+ return (pfn + level_size(level) - 1) & level_mask(level);
}
-static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr)
+static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
+ unsigned long pfn)
{
- int addr_width = agaw_to_width(domain->agaw);
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
struct dma_pte *parent, *pte = NULL;
int level = agaw_to_level(domain->agaw);
int offset;
- unsigned long flags;
BUG_ON(!domain->pgd);
-
- addr &= (((u64)1) << addr_width) - 1;
+ BUG_ON(addr_width < BITS_PER_LONG && pfn >> addr_width);
parent = domain->pgd;
- spin_lock_irqsave(&domain->mapping_lock, flags);
while (level > 0) {
void *tmp_page;
- offset = address_level_offset(addr, level);
+ offset = pfn_level_offset(pfn, level);
pte = &parent[offset];
if (level == 1)
break;
if (!dma_pte_present(pte)) {
+ uint64_t pteval;
+
tmp_page = alloc_pgtable_page();
- if (!tmp_page) {
- spin_unlock_irqrestore(&domain->mapping_lock,
- flags);
+ if (!tmp_page)
return NULL;
+
+ domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
+ pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
+ if (cmpxchg64(&pte->val, 0ULL, pteval)) {
+ /* Someone else set it while we were thinking; use theirs. */
+ free_pgtable_page(tmp_page);
+ } else {
+ dma_pte_addr(pte);
+ domain_flush_cache(domain, pte, sizeof(*pte));
}
- domain_flush_cache(domain, tmp_page, PAGE_SIZE);
- dma_set_pte_addr(pte, virt_to_phys(tmp_page));
- /*
- * high level table always sets r/w, last level page
- * table control read/write
- */
- dma_set_pte_readable(pte);
- dma_set_pte_writable(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
}
parent = phys_to_virt(dma_pte_addr(pte));
level--;
}
- spin_unlock_irqrestore(&domain->mapping_lock, flags);
return pte;
}
/* return address's pte at specific level */
-static struct dma_pte *dma_addr_level_pte(struct dmar_domain *domain, u64 addr,
- int level)
+static struct dma_pte *dma_pfn_level_pte(struct dmar_domain *domain,
+ unsigned long pfn,
+ int level)
{
struct dma_pte *parent, *pte = NULL;
int total = agaw_to_level(domain->agaw);
@@ -730,7 +754,7 @@
parent = domain->pgd;
while (level <= total) {
- offset = address_level_offset(addr, total);
+ offset = pfn_level_offset(pfn, total);
pte = &parent[offset];
if (level == total)
return pte;
@@ -743,74 +767,82 @@
return NULL;
}
-/* clear one page's page table */
-static void dma_pte_clear_one(struct dmar_domain *domain, u64 addr)
-{
- struct dma_pte *pte = NULL;
-
- /* get last level pte */
- pte = dma_addr_level_pte(domain, addr, 1);
-
- if (pte) {
- dma_clear_pte(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
- }
-}
-
/* clear last level pte, a tlb flush should be followed */
-static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end)
+static void dma_pte_clear_range(struct dmar_domain *domain,
+ unsigned long start_pfn,
+ unsigned long last_pfn)
{
- int addr_width = agaw_to_width(domain->agaw);
- int npages;
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+ struct dma_pte *first_pte, *pte;
- start &= (((u64)1) << addr_width) - 1;
- end &= (((u64)1) << addr_width) - 1;
- /* in case it's partial page */
- start &= PAGE_MASK;
- end = PAGE_ALIGN(end);
- npages = (end - start) / VTD_PAGE_SIZE;
+ BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+ BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
- /* we don't need lock here, nobody else touches the iova range */
- while (npages--) {
- dma_pte_clear_one(domain, start);
- start += VTD_PAGE_SIZE;
+ /* we don't need lock here; nobody else touches the iova range */
+ while (start_pfn <= last_pfn) {
+ first_pte = pte = dma_pfn_level_pte(domain, start_pfn, 1);
+ if (!pte) {
+ start_pfn = align_to_level(start_pfn + 1, 2);
+ continue;
+ }
+ do {
+ dma_clear_pte(pte);
+ start_pfn++;
+ pte++;
+ } while (start_pfn <= last_pfn && !first_pte_in_page(pte));
+
+ domain_flush_cache(domain, first_pte,
+ (void *)pte - (void *)first_pte);
}
}
/* free page table pages. last level pte should already be cleared */
static void dma_pte_free_pagetable(struct dmar_domain *domain,
- u64 start, u64 end)
+ unsigned long start_pfn,
+ unsigned long last_pfn)
{
- int addr_width = agaw_to_width(domain->agaw);
- struct dma_pte *pte;
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+ struct dma_pte *first_pte, *pte;
int total = agaw_to_level(domain->agaw);
int level;
- u64 tmp;
+ unsigned long tmp;
- start &= (((u64)1) << addr_width) - 1;
- end &= (((u64)1) << addr_width) - 1;
+ BUG_ON(addr_width < BITS_PER_LONG && start_pfn >> addr_width);
+ BUG_ON(addr_width < BITS_PER_LONG && last_pfn >> addr_width);
- /* we don't need lock here, nobody else touches the iova range */
+ /* We don't need lock here; nobody else touches the iova range */
level = 2;
while (level <= total) {
- tmp = align_to_level(start, level);
- if (tmp >= end || (tmp + level_size(level) > end))
+ tmp = align_to_level(start_pfn, level);
+
+ /* If we can't even clear one PTE at this level, we're done */
+ if (tmp + level_size(level) - 1 > last_pfn)
return;
- while (tmp < end) {
- pte = dma_addr_level_pte(domain, tmp, level);
- if (pte) {
- free_pgtable_page(
- phys_to_virt(dma_pte_addr(pte)));
- dma_clear_pte(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
+ while (tmp + level_size(level) - 1 <= last_pfn) {
+ first_pte = pte = dma_pfn_level_pte(domain, tmp, level);
+ if (!pte) {
+ tmp = align_to_level(tmp + 1, level + 1);
+ continue;
}
- tmp += level_size(level);
+ do {
+ if (dma_pte_present(pte)) {
+ free_pgtable_page(phys_to_virt(dma_pte_addr(pte)));
+ dma_clear_pte(pte);
+ }
+ pte++;
+ tmp += level_size(level);
+ } while (!first_pte_in_page(pte) &&
+ tmp + level_size(level) - 1 <= last_pfn);
+
+ domain_flush_cache(domain, first_pte,
+ (void *)pte - (void *)first_pte);
+
}
level++;
}
/* free pgd */
- if (start == 0 && end >= ((((u64)1) << addr_width) - 1)) {
+ if (start_pfn == 0 && last_pfn == DOMAIN_MAX_PFN(domain->gaw)) {
free_pgtable_page(domain->pgd);
domain->pgd = NULL;
}
@@ -1036,11 +1068,11 @@
}
static void iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did,
- u64 addr, unsigned int pages)
+ unsigned long pfn, unsigned int pages)
{
unsigned int mask = ilog2(__roundup_pow_of_two(pages));
+ uint64_t addr = (uint64_t)pfn << VTD_PAGE_SHIFT;
- BUG_ON(addr & (~VTD_PAGE_MASK));
BUG_ON(pages == 0);
/*
@@ -1055,7 +1087,12 @@
else
iommu->flush.flush_iotlb(iommu, did, addr, mask,
DMA_TLB_PSI_FLUSH);
- if (did)
+
+ /*
+ * In caching mode, domain ID 0 is reserved for non-present to present
+ * mapping flush. Device IOTLB doesn't need to be flushed in this case.
+ */
+ if (!cap_caching_mode(iommu->cap) || did)
iommu_flush_dev_iotlb(iommu->domains[did], addr, mask);
}
@@ -1280,7 +1317,6 @@
struct pci_dev *pdev = NULL;
struct iova *iova;
int i;
- u64 addr, size;
init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN);
@@ -1303,12 +1339,9 @@
r = &pdev->resource[i];
if (!r->flags || !(r->flags & IORESOURCE_MEM))
continue;
- addr = r->start;
- addr &= PHYSICAL_PAGE_MASK;
- size = r->end - addr;
- size = PAGE_ALIGN(size);
- iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
- IOVA_PFN(size + addr) - 1);
+ iova = reserve_iova(&reserved_iova_list,
+ IOVA_PFN(r->start),
+ IOVA_PFN(r->end));
if (!iova)
printk(KERN_ERR "Reserve iova failed\n");
}
@@ -1342,7 +1375,6 @@
unsigned long sagaw;
init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
- spin_lock_init(&domain->mapping_lock);
spin_lock_init(&domain->iommu_lock);
domain_reserve_special_ranges(domain);
@@ -1389,7 +1421,6 @@
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
- u64 end;
/* Domain 0 is reserved, so dont process it */
if (!domain)
@@ -1398,14 +1429,12 @@
domain_remove_dev_info(domain);
/* destroy iovas */
put_iova_domain(&domain->iovad);
- end = DOMAIN_MAX_ADDR(domain->gaw);
- end = end & (~PAGE_MASK);
/* clear ptes */
- dma_pte_clear_range(domain, 0, end);
+ dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
/* free page tables */
- dma_pte_free_pagetable(domain, 0, end);
+ dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
for_each_active_iommu(iommu, drhd)
if (test_bit(iommu->seq_id, &domain->iommu_bmp))
@@ -1476,7 +1505,6 @@
}
set_bit(num, iommu->domain_ids);
- set_bit(iommu->seq_id, &domain->iommu_bmp);
iommu->domains[num] = domain;
id = num;
}
@@ -1619,42 +1647,94 @@
tmp->devfn);
}
-static int
-domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova,
- u64 hpa, size_t size, int prot)
+/* Returns a number of VTD pages, but aligned to MM page size */
+static inline unsigned long aligned_nrpages(unsigned long host_addr,
+ size_t size)
{
- u64 start_pfn, end_pfn;
- struct dma_pte *pte;
- int index;
- int addr_width = agaw_to_width(domain->agaw);
+ host_addr &= ~PAGE_MASK;
+ return PAGE_ALIGN(host_addr + size) >> VTD_PAGE_SHIFT;
+}
- hpa &= (((u64)1) << addr_width) - 1;
+static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+ struct scatterlist *sg, unsigned long phys_pfn,
+ unsigned long nr_pages, int prot)
+{
+ struct dma_pte *first_pte = NULL, *pte = NULL;
+ phys_addr_t uninitialized_var(pteval);
+ int addr_width = agaw_to_width(domain->agaw) - VTD_PAGE_SHIFT;
+ unsigned long sg_res;
+
+ BUG_ON(addr_width < BITS_PER_LONG && (iov_pfn + nr_pages - 1) >> addr_width);
if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0)
return -EINVAL;
- iova &= PAGE_MASK;
- start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT;
- end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT;
- index = 0;
- while (start_pfn < end_pfn) {
- pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index);
- if (!pte)
- return -ENOMEM;
+
+ prot &= DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP;
+
+ if (sg)
+ sg_res = 0;
+ else {
+ sg_res = nr_pages + 1;
+ pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | prot;
+ }
+
+ while (nr_pages--) {
+ uint64_t tmp;
+
+ if (!sg_res) {
+ sg_res = aligned_nrpages(sg->offset, sg->length);
+ sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
+ sg->dma_length = sg->length;
+ pteval = page_to_phys(sg_page(sg)) | prot;
+ }
+ if (!pte) {
+ first_pte = pte = pfn_to_dma_pte(domain, iov_pfn);
+ if (!pte)
+ return -ENOMEM;
+ }
/* We don't need lock here, nobody else
* touches the iova range
*/
- BUG_ON(dma_pte_addr(pte));
- dma_set_pte_addr(pte, start_pfn << VTD_PAGE_SHIFT);
- dma_set_pte_prot(pte, prot);
- if (prot & DMA_PTE_SNP)
- dma_set_pte_snp(pte);
- domain_flush_cache(domain, pte, sizeof(*pte));
- start_pfn++;
- index++;
+ tmp = cmpxchg64_local(&pte->val, 0ULL, pteval);
+ if (tmp) {
+ static int dumps = 5;
+ printk(KERN_CRIT "ERROR: DMA PTE for vPFN 0x%lx already set (to %llx not %llx)\n",
+ iov_pfn, tmp, (unsigned long long)pteval);
+ if (dumps) {
+ dumps--;
+ debug_dma_dump_mappings(NULL);
+ }
+ WARN_ON(1);
+ }
+ pte++;
+ if (!nr_pages || first_pte_in_page(pte)) {
+ domain_flush_cache(domain, first_pte,
+ (void *)pte - (void *)first_pte);
+ pte = NULL;
+ }
+ iov_pfn++;
+ pteval += VTD_PAGE_SIZE;
+ sg_res--;
+ if (!sg_res)
+ sg = sg_next(sg);
}
return 0;
}
+static inline int domain_sg_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+ struct scatterlist *sg, unsigned long nr_pages,
+ int prot)
+{
+ return __domain_mapping(domain, iov_pfn, sg, 0, nr_pages, prot);
+}
+
+static inline int domain_pfn_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
+ unsigned long phys_pfn, unsigned long nr_pages,
+ int prot)
+{
+ return __domain_mapping(domain, iov_pfn, NULL, phys_pfn, nr_pages, prot);
+}
+
static void iommu_detach_dev(struct intel_iommu *iommu, u8 bus, u8 devfn)
{
if (!iommu)
@@ -1845,58 +1925,61 @@
static int iommu_identity_mapping;
+static int iommu_domain_identity_map(struct dmar_domain *domain,
+ unsigned long long start,
+ unsigned long long end)
+{
+ unsigned long first_vpfn = start >> VTD_PAGE_SHIFT;
+ unsigned long last_vpfn = end >> VTD_PAGE_SHIFT;
+
+ if (!reserve_iova(&domain->iovad, dma_to_mm_pfn(first_vpfn),
+ dma_to_mm_pfn(last_vpfn))) {
+ printk(KERN_ERR "IOMMU: reserve iova failed\n");
+ return -ENOMEM;
+ }
+
+ pr_debug("Mapping reserved region %llx-%llx for domain %d\n",
+ start, end, domain->id);
+ /*
+ * RMRR range might have overlap with physical memory range,
+ * clear it first
+ */
+ dma_pte_clear_range(domain, first_vpfn, last_vpfn);
+
+ return domain_pfn_mapping(domain, first_vpfn, first_vpfn,
+ last_vpfn - first_vpfn + 1,
+ DMA_PTE_READ|DMA_PTE_WRITE);
+}
+
static int iommu_prepare_identity_map(struct pci_dev *pdev,
unsigned long long start,
unsigned long long end)
{
struct dmar_domain *domain;
- unsigned long size;
- unsigned long long base;
int ret;
printk(KERN_INFO
- "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
- pci_name(pdev), start, end);
- if (iommu_identity_mapping)
- domain = si_domain;
- else
- /* page table init */
- domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+ "IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
+ pci_name(pdev), start, end);
+
+ domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
if (!domain)
return -ENOMEM;
- /* The address might not be aligned */
- base = start & PAGE_MASK;
- size = end - base;
- size = PAGE_ALIGN(size);
- if (!reserve_iova(&domain->iovad, IOVA_PFN(base),
- IOVA_PFN(base + size) - 1)) {
- printk(KERN_ERR "IOMMU: reserve iova failed\n");
- ret = -ENOMEM;
- goto error;
- }
-
- pr_debug("Mapping reserved region %lx@%llx for %s\n",
- size, base, pci_name(pdev));
- /*
- * RMRR range might have overlap with physical memory range,
- * clear it first
- */
- dma_pte_clear_range(domain, base, base + size);
-
- ret = domain_page_mapping(domain, base, base, size,
- DMA_PTE_READ|DMA_PTE_WRITE);
+ ret = iommu_domain_identity_map(domain, start, end);
if (ret)
goto error;
/* context entry init */
ret = domain_context_mapping(domain, pdev, CONTEXT_TT_MULTI_LEVEL);
- if (!ret)
- return 0;
-error:
+ if (ret)
+ goto error;
+
+ return 0;
+
+ error:
domain_exit(domain);
return ret;
-
}
static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr,
@@ -1908,64 +1991,6 @@
rmrr->end_address + 1);
}
-#ifdef CONFIG_DMAR_GFX_WA
-struct iommu_prepare_data {
- struct pci_dev *pdev;
- int ret;
-};
-
-static int __init iommu_prepare_work_fn(unsigned long start_pfn,
- unsigned long end_pfn, void *datax)
-{
- struct iommu_prepare_data *data;
-
- data = (struct iommu_prepare_data *)datax;
-
- data->ret = iommu_prepare_identity_map(data->pdev,
- start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
- return data->ret;
-
-}
-
-static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev)
-{
- int nid;
- struct iommu_prepare_data data;
-
- data.pdev = pdev;
- data.ret = 0;
-
- for_each_online_node(nid) {
- work_with_active_regions(nid, iommu_prepare_work_fn, &data);
- if (data.ret)
- return data.ret;
- }
- return data.ret;
-}
-
-static void __init iommu_prepare_gfx_mapping(void)
-{
- struct pci_dev *pdev = NULL;
- int ret;
-
- for_each_pci_dev(pdev) {
- if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO ||
- !IS_GFX_DEVICE(pdev))
- continue;
- printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n",
- pci_name(pdev));
- ret = iommu_prepare_with_active_regions(pdev);
- if (ret)
- printk(KERN_ERR "IOMMU: mapping reserved region failed\n");
- }
-}
-#else /* !CONFIG_DMAR_GFX_WA */
-static inline void iommu_prepare_gfx_mapping(void)
-{
- return;
-}
-#endif
-
#ifdef CONFIG_DMAR_FLOPPY_WA
static inline void iommu_prepare_isa(void)
{
@@ -1976,12 +2001,12 @@
if (!pdev)
return;
- printk(KERN_INFO "IOMMU: Prepare 0-16M unity mapping for LPC\n");
+ printk(KERN_INFO "IOMMU: Prepare 0-16MiB unity mapping for LPC\n");
ret = iommu_prepare_identity_map(pdev, 0, 16*1024*1024);
if (ret)
- printk(KERN_ERR "IOMMU: Failed to create 0-64M identity map, "
- "floppy might not work\n");
+ printk(KERN_ERR "IOMMU: Failed to create 0-16MiB identity map; "
+ "floppy might not work\n");
}
#else
@@ -2009,16 +2034,30 @@
}
static int md_domain_init(struct dmar_domain *domain, int guest_width);
+
+static int __init si_domain_work_fn(unsigned long start_pfn,
+ unsigned long end_pfn, void *datax)
+{
+ int *ret = datax;
+
+ *ret = iommu_domain_identity_map(si_domain,
+ (uint64_t)start_pfn << PAGE_SHIFT,
+ (uint64_t)end_pfn << PAGE_SHIFT);
+ return *ret;
+
+}
+
static int si_domain_init(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
- int ret = 0;
+ int nid, ret = 0;
si_domain = alloc_domain();
if (!si_domain)
return -EFAULT;
+ pr_debug("Identity mapping domain is domain %d\n", si_domain->id);
for_each_active_iommu(iommu, drhd) {
ret = iommu_attach_domain(si_domain, iommu);
@@ -2035,6 +2074,12 @@
si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY;
+ for_each_online_node(nid) {
+ work_with_active_regions(nid, si_domain_work_fn, &ret);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
@@ -2079,9 +2124,49 @@
return 0;
}
+static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
+{
+ if (iommu_identity_mapping == 2)
+ return IS_GFX_DEVICE(pdev);
+
+ /*
+ * We want to start off with all devices in the 1:1 domain, and
+ * take them out later if we find they can't access all of memory.
+ *
+ * However, we can't do this for PCI devices behind bridges,
+ * because all PCI devices behind the same bridge will end up
+ * with the same source-id on their transactions.
+ *
+ * Practically speaking, we can't change things around for these
+ * devices at run-time, because we can't be sure there'll be no
+ * DMA transactions in flight for any of their siblings.
+ *
+ * So PCI devices (unless they're on the root bus) as well as
+ * their parent PCI-PCI or PCIe-PCI bridges must be left _out_ of
+ * the 1:1 domain, just in _case_ one of their siblings turns out
+ * not to be able to map all of memory.
+ */
+ if (!pdev->is_pcie) {
+ if (!pci_is_root_bus(pdev->bus))
+ return 0;
+ if (pdev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+ return 0;
+ } else if (pdev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+ return 0;
+
+ /*
+ * At boot time, we don't yet know if devices will be 64-bit capable.
+ * Assume that they will -- if they turn out not to be, then we can
+ * take them out of the 1:1 domain later.
+ */
+ if (!startup)
+ return pdev->dma_mask > DMA_BIT_MASK(32);
+
+ return 1;
+}
+
static int iommu_prepare_static_identity_mapping(void)
{
- int i;
struct pci_dev *pdev = NULL;
int ret;
@@ -2089,23 +2174,19 @@
if (ret)
return -EFAULT;
- printk(KERN_INFO "IOMMU: Setting identity map:\n");
for_each_pci_dev(pdev) {
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
+ if (iommu_should_identity_map(pdev, 1)) {
+ printk(KERN_INFO "IOMMU: identity mapping for device %s\n",
+ pci_name(pdev));
- if (ei->type == E820_RAM) {
- ret = iommu_prepare_identity_map(pdev,
- ei->addr, ei->addr + ei->size);
- if (ret) {
- printk(KERN_INFO "1:1 mapping to one domain failed.\n");
- return -EFAULT;
- }
- }
+ ret = domain_context_mapping(si_domain, pdev,
+ CONTEXT_TT_MULTI_LEVEL);
+ if (ret)
+ return ret;
+ ret = domain_add_dev_info(si_domain, pdev);
+ if (ret)
+ return ret;
}
- ret = domain_add_dev_info(si_domain, pdev);
- if (ret)
- return ret;
}
return 0;
@@ -2260,6 +2341,10 @@
* identity mapping if iommu_identity_mapping is set.
*/
if (!iommu_pass_through) {
+#ifdef CONFIG_DMAR_BROKEN_GFX_WA
+ if (!iommu_identity_mapping)
+ iommu_identity_mapping = 2;
+#endif
if (iommu_identity_mapping)
iommu_prepare_static_identity_mapping();
/*
@@ -2293,8 +2378,6 @@
}
}
- iommu_prepare_gfx_mapping();
-
iommu_prepare_isa();
}
@@ -2339,50 +2422,32 @@
return ret;
}
-static inline u64 aligned_size(u64 host_addr, size_t size)
-{
- u64 addr;
- addr = (host_addr & (~PAGE_MASK)) + size;
- return PAGE_ALIGN(addr);
-}
-
-struct iova *
-iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end)
-{
- struct iova *piova;
-
- /* Make sure it's in range */
- end = min_t(u64, DOMAIN_MAX_ADDR(domain->gaw), end);
- if (!size || (IOVA_START_ADDR + size > end))
- return NULL;
-
- piova = alloc_iova(&domain->iovad,
- size >> PAGE_SHIFT, IOVA_PFN(end), 1);
- return piova;
-}
-
-static struct iova *
-__intel_alloc_iova(struct device *dev, struct dmar_domain *domain,
- size_t size, u64 dma_mask)
+/* This takes a number of _MM_ pages, not VTD pages */
+static struct iova *intel_alloc_iova(struct device *dev,
+ struct dmar_domain *domain,
+ unsigned long nrpages, uint64_t dma_mask)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct iova *iova = NULL;
- if (dma_mask <= DMA_BIT_MASK(32) || dmar_forcedac)
- iova = iommu_alloc_iova(domain, size, dma_mask);
- else {
+ /* Restrict dma_mask to the width that the iommu can handle */
+ dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask);
+
+ if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) {
/*
* First try to allocate an io virtual address in
* DMA_BIT_MASK(32) and if that fails then try allocating
* from higher range
*/
- iova = iommu_alloc_iova(domain, size, DMA_BIT_MASK(32));
- if (!iova)
- iova = iommu_alloc_iova(domain, size, dma_mask);
+ iova = alloc_iova(&domain->iovad, nrpages,
+ IOVA_PFN(DMA_BIT_MASK(32)), 1);
+ if (iova)
+ return iova;
}
-
- if (!iova) {
- printk(KERN_ERR"Allocating iova for %s failed", pci_name(pdev));
+ iova = alloc_iova(&domain->iovad, nrpages, IOVA_PFN(dma_mask), 1);
+ if (unlikely(!iova)) {
+ printk(KERN_ERR "Allocating %ld-page iova for %s failed",
+ nrpages, pci_name(pdev));
return NULL;
}
@@ -2424,16 +2489,24 @@
}
/* Check if the pdev needs to go through non-identity map and unmap process.*/
-static int iommu_no_mapping(struct pci_dev *pdev)
+static int iommu_no_mapping(struct device *dev)
{
+ struct pci_dev *pdev;
int found;
+ if (unlikely(dev->bus != &pci_bus_type))
+ return 1;
+
+ pdev = to_pci_dev(dev);
+ if (iommu_dummy(pdev))
+ return 1;
+
if (!iommu_identity_mapping)
- return iommu_dummy(pdev);
+ return 0;
found = identity_mapping(pdev);
if (found) {
- if (pdev->dma_mask > DMA_BIT_MASK(32))
+ if (iommu_should_identity_map(pdev, 0))
return 1;
else {
/*
@@ -2450,9 +2523,12 @@
* In case of a detached 64 bit DMA device from vm, the device
* is put into si_domain for identity mapping.
*/
- if (pdev->dma_mask > DMA_BIT_MASK(32)) {
+ if (iommu_should_identity_map(pdev, 0)) {
int ret;
ret = domain_add_dev_info(si_domain, pdev);
+ if (ret)
+ return 0;
+ ret = domain_context_mapping(si_domain, pdev, CONTEXT_TT_MULTI_LEVEL);
if (!ret) {
printk(KERN_INFO "64bit %s uses identity mapping\n",
pci_name(pdev));
@@ -2461,7 +2537,7 @@
}
}
- return iommu_dummy(pdev);
+ return 0;
}
static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
@@ -2474,10 +2550,11 @@
int prot = 0;
int ret;
struct intel_iommu *iommu;
+ unsigned long paddr_pfn = paddr >> PAGE_SHIFT;
BUG_ON(dir == DMA_NONE);
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(hwdev))
return paddr;
domain = get_valid_domain_for_dev(pdev);
@@ -2485,14 +2562,13 @@
return 0;
iommu = domain_get_iommu(domain);
- size = aligned_size((u64)paddr, size);
+ size = aligned_nrpages(paddr, size);
- iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+ iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+ pdev->dma_mask);
if (!iova)
goto error;
- start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
-
/*
* Check if DMAR supports zero-length reads on write only
* mappings..
@@ -2508,20 +2584,20 @@
* might have two guest_addr mapping to the same host paddr, but this
* is not a big problem
*/
- ret = domain_page_mapping(domain, start_paddr,
- ((u64)paddr) & PHYSICAL_PAGE_MASK,
- size, prot);
+ ret = domain_pfn_mapping(domain, mm_to_dma_pfn(iova->pfn_lo),
+ mm_to_dma_pfn(paddr_pfn), size, prot);
if (ret)
goto error;
/* it's a non-present to present mapping. Only flush if caching mode */
if (cap_caching_mode(iommu->cap))
- iommu_flush_iotlb_psi(iommu, 0, start_paddr,
- size >> VTD_PAGE_SHIFT);
+ iommu_flush_iotlb_psi(iommu, 0, mm_to_dma_pfn(iova->pfn_lo), size);
else
iommu_flush_write_buffer(iommu);
- return start_paddr + ((u64)paddr & (~PAGE_MASK));
+ start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT;
+ start_paddr += paddr & ~PAGE_MASK;
+ return start_paddr;
error:
if (iova)
@@ -2614,11 +2690,11 @@
{
struct pci_dev *pdev = to_pci_dev(dev);
struct dmar_domain *domain;
- unsigned long start_addr;
+ unsigned long start_pfn, last_pfn;
struct iova *iova;
struct intel_iommu *iommu;
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(dev))
return;
domain = find_domain(pdev);
@@ -2627,22 +2703,25 @@
iommu = domain_get_iommu(domain);
iova = find_iova(&domain->iovad, IOVA_PFN(dev_addr));
- if (!iova)
+ if (WARN_ONCE(!iova, "Driver unmaps unmatched page at PFN %llx\n",
+ (unsigned long long)dev_addr))
return;
- start_addr = iova->pfn_lo << PAGE_SHIFT;
- size = aligned_size((u64)dev_addr, size);
+ start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+ last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
- pr_debug("Device %s unmapping: %zx@%llx\n",
- pci_name(pdev), size, (unsigned long long)start_addr);
+ pr_debug("Device %s unmapping: pfn %lx-%lx\n",
+ pci_name(pdev), start_pfn, last_pfn);
/* clear the whole page */
- dma_pte_clear_range(domain, start_addr, start_addr + size);
+ dma_pte_clear_range(domain, start_pfn, last_pfn);
+
/* free page tables */
- dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+ dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
if (intel_iommu_strict) {
- iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
- size >> VTD_PAGE_SHIFT);
+ iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+ last_pfn - start_pfn + 1);
/* free iova */
__free_iova(&domain->iovad, iova);
} else {
@@ -2700,17 +2779,13 @@
int nelems, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
- int i;
struct pci_dev *pdev = to_pci_dev(hwdev);
struct dmar_domain *domain;
- unsigned long start_addr;
+ unsigned long start_pfn, last_pfn;
struct iova *iova;
- size_t size = 0;
- phys_addr_t addr;
- struct scatterlist *sg;
struct intel_iommu *iommu;
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(hwdev))
return;
domain = find_domain(pdev);
@@ -2719,22 +2794,21 @@
iommu = domain_get_iommu(domain);
iova = find_iova(&domain->iovad, IOVA_PFN(sglist[0].dma_address));
- if (!iova)
+ if (WARN_ONCE(!iova, "Driver unmaps unmatched sglist at PFN %llx\n",
+ (unsigned long long)sglist[0].dma_address))
return;
- for_each_sg(sglist, sg, nelems, i) {
- addr = page_to_phys(sg_page(sg)) + sg->offset;
- size += aligned_size((u64)addr, sg->length);
- }
- start_addr = iova->pfn_lo << PAGE_SHIFT;
+ start_pfn = mm_to_dma_pfn(iova->pfn_lo);
+ last_pfn = mm_to_dma_pfn(iova->pfn_hi + 1) - 1;
/* clear the whole page */
- dma_pte_clear_range(domain, start_addr, start_addr + size);
- /* free page tables */
- dma_pte_free_pagetable(domain, start_addr, start_addr + size);
+ dma_pte_clear_range(domain, start_pfn, last_pfn);
- iommu_flush_iotlb_psi(iommu, domain->id, start_addr,
- size >> VTD_PAGE_SHIFT);
+ /* free page tables */
+ dma_pte_free_pagetable(domain, start_pfn, last_pfn);
+
+ iommu_flush_iotlb_psi(iommu, domain->id, start_pfn,
+ (last_pfn - start_pfn + 1));
/* free iova */
__free_iova(&domain->iovad, iova);
@@ -2757,21 +2831,20 @@
static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems,
enum dma_data_direction dir, struct dma_attrs *attrs)
{
- phys_addr_t addr;
int i;
struct pci_dev *pdev = to_pci_dev(hwdev);
struct dmar_domain *domain;
size_t size = 0;
int prot = 0;
- size_t offset = 0;
+ size_t offset_pfn = 0;
struct iova *iova = NULL;
int ret;
struct scatterlist *sg;
- unsigned long start_addr;
+ unsigned long start_vpfn;
struct intel_iommu *iommu;
BUG_ON(dir == DMA_NONE);
- if (iommu_no_mapping(pdev))
+ if (iommu_no_mapping(hwdev))
return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir);
domain = get_valid_domain_for_dev(pdev);
@@ -2780,12 +2853,11 @@
iommu = domain_get_iommu(domain);
- for_each_sg(sglist, sg, nelems, i) {
- addr = page_to_phys(sg_page(sg)) + sg->offset;
- size += aligned_size((u64)addr, sg->length);
- }
+ for_each_sg(sglist, sg, nelems, i)
+ size += aligned_nrpages(sg->offset, sg->length);
- iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask);
+ iova = intel_alloc_iova(hwdev, domain, dma_to_mm_pfn(size),
+ pdev->dma_mask);
if (!iova) {
sglist->dma_length = 0;
return 0;
@@ -2801,35 +2873,24 @@
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
prot |= DMA_PTE_WRITE;
- start_addr = iova->pfn_lo << PAGE_SHIFT;
- offset = 0;
- for_each_sg(sglist, sg, nelems, i) {
- addr = page_to_phys(sg_page(sg)) + sg->offset;
- size = aligned_size((u64)addr, sg->length);
- ret = domain_page_mapping(domain, start_addr + offset,
- ((u64)addr) & PHYSICAL_PAGE_MASK,
- size, prot);
- if (ret) {
- /* clear the page */
- dma_pte_clear_range(domain, start_addr,
- start_addr + offset);
- /* free page tables */
- dma_pte_free_pagetable(domain, start_addr,
- start_addr + offset);
- /* free iova */
- __free_iova(&domain->iovad, iova);
- return 0;
- }
- sg->dma_address = start_addr + offset +
- ((u64)addr & (~PAGE_MASK));
- sg->dma_length = sg->length;
- offset += size;
+ start_vpfn = mm_to_dma_pfn(iova->pfn_lo);
+
+ ret = domain_sg_mapping(domain, start_vpfn, sglist, size, prot);
+ if (unlikely(ret)) {
+ /* clear the page */
+ dma_pte_clear_range(domain, start_vpfn,
+ start_vpfn + size - 1);
+ /* free page tables */
+ dma_pte_free_pagetable(domain, start_vpfn,
+ start_vpfn + size - 1);
+ /* free iova */
+ __free_iova(&domain->iovad, iova);
+ return 0;
}
/* it's a non-present to present mapping. Only flush if caching mode */
if (cap_caching_mode(iommu->cap))
- iommu_flush_iotlb_psi(iommu, 0, start_addr,
- offset >> VTD_PAGE_SHIFT);
+ iommu_flush_iotlb_psi(iommu, 0, start_vpfn, offset_pfn);
else
iommu_flush_write_buffer(iommu);
@@ -3334,7 +3395,6 @@
int adjust_width;
init_iova_domain(&domain->iovad, DMA_32BIT_PFN);
- spin_lock_init(&domain->mapping_lock);
spin_lock_init(&domain->iommu_lock);
domain_reserve_special_ranges(domain);
@@ -3348,6 +3408,7 @@
domain->iommu_count = 0;
domain->iommu_coherency = 0;
+ domain->iommu_snooping = 0;
domain->max_addr = 0;
/* always allocate the top pgd */
@@ -3388,8 +3449,6 @@
static void vm_domain_exit(struct dmar_domain *domain)
{
- u64 end;
-
/* Domain 0 is reserved, so dont process it */
if (!domain)
return;
@@ -3397,14 +3456,12 @@
vm_domain_remove_all_dev_info(domain);
/* destroy iovas */
put_iova_domain(&domain->iovad);
- end = DOMAIN_MAX_ADDR(domain->gaw);
- end = end & (~VTD_PAGE_MASK);
/* clear ptes */
- dma_pte_clear_range(domain, 0, end);
+ dma_pte_clear_range(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
/* free page tables */
- dma_pte_free_pagetable(domain, 0, end);
+ dma_pte_free_pagetable(domain, 0, DOMAIN_MAX_PFN(domain->gaw));
iommu_free_vm_domain(domain);
free_domain_mem(domain);
@@ -3513,7 +3570,7 @@
if ((iommu_prot & IOMMU_CACHE) && dmar_domain->iommu_snooping)
prot |= DMA_PTE_SNP;
- max_addr = (iova & VTD_PAGE_MASK) + VTD_PAGE_ALIGN(size);
+ max_addr = iova + size;
if (dmar_domain->max_addr < max_addr) {
int min_agaw;
u64 end;
@@ -3531,8 +3588,11 @@
}
dmar_domain->max_addr = max_addr;
}
-
- ret = domain_page_mapping(dmar_domain, iova, hpa, size, prot);
+ /* Round up size to next multiple of PAGE_SIZE, if it and
+ the low bits of hpa would take us onto the next page */
+ size = aligned_nrpages(hpa, size);
+ ret = domain_pfn_mapping(dmar_domain, iova >> VTD_PAGE_SHIFT,
+ hpa >> VTD_PAGE_SHIFT, size, prot);
return ret;
}
@@ -3540,15 +3600,15 @@
unsigned long iova, size_t size)
{
struct dmar_domain *dmar_domain = domain->priv;
- dma_addr_t base;
- /* The address might not be aligned */
- base = iova & VTD_PAGE_MASK;
- size = VTD_PAGE_ALIGN(size);
- dma_pte_clear_range(dmar_domain, base, base + size);
+ if (!size)
+ return;
- if (dmar_domain->max_addr == base + size)
- dmar_domain->max_addr = base;
+ dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT,
+ (iova + size - 1) >> VTD_PAGE_SHIFT);
+
+ if (dmar_domain->max_addr == iova + size)
+ dmar_domain->max_addr = iova;
}
static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -3558,7 +3618,7 @@
struct dma_pte *pte;
u64 phys = 0;
- pte = addr_to_dma_pte(dmar_domain, iova);
+ pte = pfn_to_dma_pte(dmar_domain, iova >> VTD_PAGE_SHIFT);
if (pte)
phys = dma_pte_addr(pte);
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 2287116..46dd440 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -1,9 +1,19 @@
/*
- * Copyright (c) 2006, Intel Corporation.
+ * Copyright © 2006-2009, Intel Corporation.
*
- * This file is released under the GPLv2.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
*
- * Copyright (C) 2006-2008 Intel Corporation
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
* Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
*/
@@ -123,7 +133,15 @@
/* Insert the new_iova into domain rbtree by holding writer lock */
/* Add new node and rebalance tree. */
{
- struct rb_node **entry = &((prev)), *parent = NULL;
+ struct rb_node **entry, *parent = NULL;
+
+ /* If we have 'prev', it's a valid place to start the
+ insertion. Otherwise, start from the root. */
+ if (prev)
+ entry = &prev;
+ else
+ entry = &iovad->rbroot.rb_node;
+
/* Figure out where to put new node */
while (*entry) {
struct iova *this = container_of(*entry,
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d9f06fb..d986afb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -127,17 +127,23 @@
* reliably as devices without an INTx disable bit will then generate a
* level IRQ which will never be cleared.
*/
-static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+static u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
u32 mask_bits = desc->masked;
if (!desc->msi_attrib.maskbit)
- return;
+ return 0;
mask_bits &= ~mask;
mask_bits |= flag;
pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits);
- desc->masked = mask_bits;
+
+ return mask_bits;
+}
+
+static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+{
+ desc->masked = __msi_mask_irq(desc, mask, flag);
}
/*
@@ -147,15 +153,21 @@
* file. This saves a few milliseconds when initialising devices with lots
* of MSI-X interrupts.
*/
-static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
{
u32 mask_bits = desc->masked;
unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
+ PCI_MSIX_ENTRY_VECTOR_CTRL;
mask_bits &= ~1;
mask_bits |= flag;
writel(mask_bits, desc->mask_base + offset);
- desc->masked = mask_bits;
+
+ return mask_bits;
+}
+
+static void msix_mask_irq(struct msi_desc *desc, u32 flag)
+{
+ desc->masked = __msix_mask_irq(desc, flag);
}
static void msi_set_mask_bit(unsigned irq, u32 flag)
@@ -188,9 +200,9 @@
void __iomem *base = entry->mask_base +
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
- msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
- msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
- msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET);
+ msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
+ msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
+ msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
} else {
struct pci_dev *dev = entry->dev;
int pos = entry->msi_attrib.pos;
@@ -225,11 +237,9 @@
base = entry->mask_base +
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
- writel(msg->address_lo,
- base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
- writel(msg->address_hi,
- base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
- writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
+ writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
+ writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
+ writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
} else {
struct pci_dev *dev = entry->dev;
int pos = entry->msi_attrib.pos;
@@ -385,6 +395,7 @@
/* Configure MSI capability structure */
ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
if (ret) {
+ msi_mask_irq(entry, mask, ~mask);
msi_free_irqs(dev);
return ret;
}
@@ -439,8 +450,14 @@
for (i = 0; i < nvec; i++) {
entry = alloc_msi_entry(dev);
- if (!entry)
- break;
+ if (!entry) {
+ if (!i)
+ iounmap(base);
+ else
+ msi_free_irqs(dev);
+ /* No enough memory. Don't try again */
+ return -ENOMEM;
+ }
j = entries[i].entry;
entry->msi_attrib.is_msix = 1;
@@ -487,7 +504,7 @@
set_irq_msi(entry->irq, entry);
j = entries[i].entry;
entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+ PCI_MSIX_ENTRY_VECTOR_CTRL);
msix_mask_irq(entry, 1);
i++;
}
@@ -611,9 +628,11 @@
pci_intx_for_msi(dev, 1);
dev->msi_enabled = 0;
+ /* Return the device with MSI unmasked as initial states */
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl);
mask = msi_capable_mask(ctrl);
- msi_mask_irq(desc, mask, ~mask);
+ /* Keep cached state to be restored */
+ __msi_mask_irq(desc, mask, ~mask);
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = desc->msi_attrib.default_irq;
@@ -653,7 +672,6 @@
list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
if (entry->msi_attrib.is_msix) {
- msix_mask_irq(entry, 1);
if (list_is_last(&entry->list, &dev->msi_list))
iounmap(entry->mask_base);
}
@@ -741,9 +759,17 @@
void pci_msix_shutdown(struct pci_dev* dev)
{
+ struct msi_desc *entry;
+
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
+ /* Return the device with MSI-X masked as initial states */
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ /* Keep cached states to be restored */
+ __msix_mask_irq(entry, 1);
+ }
+
msix_set_enable(dev, 0);
pci_intx_for_msi(dev, 1);
dev->msix_enabled = 0;
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index a066284..de27c1c 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,11 +6,11 @@
#ifndef MSI_H
#define MSI_H
-#define PCI_MSIX_ENTRY_SIZE 16
-#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0
-#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4
-#define PCI_MSIX_ENTRY_DATA_OFFSET 8
-#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12
+#define PCI_MSIX_ENTRY_SIZE 16
+#define PCI_MSIX_ENTRY_LOWER_ADDR 0
+#define PCI_MSIX_ENTRY_UPPER_ADDR 4
+#define PCI_MSIX_ENTRY_DATA 8
+#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
#define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6c93af5..dbd0f94 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1517,11 +1517,20 @@
*
* Perform INTx swizzling for a device behind one level of bridge. This is
* required by section 9.1 of the PCI-to-PCI bridge specification for devices
- * behind bridges on add-in cards.
+ * behind bridges on add-in cards. For devices with ARI enabled, the slot
+ * number is always 0 (see the Implementation Note in section 2.2.8.1 of
+ * the PCI Express Base Specification, Revision 2.1)
*/
u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
{
- return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+ int slot;
+
+ if (pci_ari_enabled(dev->bus))
+ slot = 0;
+ else
+ slot = PCI_SLOT(dev->devfn);
+
+ return (((pin - 1) + slot) % 4) + 1;
}
int
@@ -2171,7 +2180,7 @@
u16 ctrl;
struct pci_dev *pdev;
- if (dev->subordinate)
+ if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
return -ENOTTY;
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c
index ece97df..a928d8a 100644
--- a/drivers/pci/pcie/aer/ecrc.c
+++ b/drivers/pci/pcie/aer/ecrc.c
@@ -106,7 +106,7 @@
disable_ecrc_checking(dev);
break;
case ECRC_POLICY_ON:
- enable_ecrc_checking(dev);;
+ enable_ecrc_checking(dev);
break;
default:
return;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 56552d7..06b9656 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1058,6 +1058,11 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+ occur when mode detecting */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index b711fb7..1898c7b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -100,16 +100,16 @@
{
struct resource *res = &dev->resource[resource];
struct resource *root;
- char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
int err;
root = pci_find_parent_resource(dev, res);
err = -EINVAL;
if (root != NULL)
- err = insert_resource(root, res);
+ err = request_resource(root, res);
if (err) {
+ const char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
dev_err(&dev->dev, "BAR %d: %s of %s %pR\n",
resource,
root ? "address space collision on" :
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index eddb074..8c02b6c 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -311,7 +311,7 @@
#include <linux/pci_hotplug.h>
/**
* pci_hp_create_link - create symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
*
* Helper function for pci_hotplug_core.c to create symbolic link to
* the hotplug driver module.
@@ -334,7 +334,7 @@
/**
* pci_hp_remove_link - remove symbolic link to the hotplug driver module.
- * @slot: struct pci_slot
+ * @pci_slot: struct pci_slot
*
* Helper function for pci_hotplug_core.c to remove symbolic link to
* the hotplug driver module.
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index ec22284..e1c1ec5 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -9,7 +9,6 @@
#include <linux/errno.h>
#include <linux/pci.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include "pci.h"
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 9ad97ea..8eb0423 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -472,7 +472,8 @@
init_timer(&poll_timer);
/* Build interrupt mask */
- printk(", %d sockets\n" KERN_INFO " irq list (", sockets);
+ printk(KERN_CONT ", %d sockets\n", sockets);
+ printk(KERN_INFO " irq list (");
if (irq_list_count == 0)
mask = irq_mask;
else
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 659421d..d4ad50d 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -1,7 +1,7 @@
/*
* vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
*
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -32,7 +32,7 @@
#include "i82365.h"
MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_LICENSE("GPL");
#define CARD_MAX_SLOTS 2
diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c
index 812f038..9b3c158 100644
--- a/drivers/pcmcia/vrc4173_cardu.c
+++ b/drivers/pcmcia/vrc4173_cardu.c
@@ -6,7 +6,7 @@
* NEC VRC4173 CARDU driver for Socket Services
* (This device doesn't support CardBus. it is supporting only 16bit PC Card.)
*
- * Copyright 2002,2003 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002,2003 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -41,7 +41,7 @@
#include "vrc4173_cardu.h"
MODULE_DESCRIPTION("NEC VRC4173 CARDU driver for Socket Services");
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_LICENSE("GPL");
static int vrc4173_cardu_slots;
diff --git a/drivers/pcmcia/vrc4173_cardu.h b/drivers/pcmcia/vrc4173_cardu.h
index 7d77c74..a7d9601 100644
--- a/drivers/pcmcia/vrc4173_cardu.h
+++ b/drivers/pcmcia/vrc4173_cardu.h
@@ -5,7 +5,7 @@
* BRIEF MODULE DESCRIPTION
* Include file for NEC VRC4173 CARDU.
*
- * Copyright 2002 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright 2002 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7232fe7..77c6097 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -277,31 +277,6 @@
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
-config THINKPAD_ACPI_DOCK
- bool "Legacy Docking Station Support"
- depends on THINKPAD_ACPI
- depends on ACPI_DOCK=n
- default n
- ---help---
- Allows the thinkpad_acpi driver to handle docking station events.
- This support was made obsolete by the generic ACPI docking station
- support (CONFIG_ACPI_DOCK). It will allow locking and removing the
- laptop from the docking station, but will not properly connect PCI
- devices.
-
- If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
- bool "Legacy Removable Bay Support"
- depends on THINKPAD_ACPI
- default y
- ---help---
- Allows the thinkpad_acpi driver to handle removable bays. It will
- electrically disable the device in the bay, and also generate
- notifications when the bay lever is ejected or inserted.
-
- If you are not sure, say Y here.
-
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
@@ -355,6 +330,7 @@
depends on INPUT
depends on EXPERIMENTAL
depends on RFKILL || RFKILL = n
+ depends on HOTPLUG_PCI
select BACKLIGHT_CLASS_DEVICE
select HWMON
---help---
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index be2fd6f..fb45f5e 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -973,7 +973,7 @@
{
acpi_status status;
u32 cap = (unsigned long)data;
- status = set_u32(!!blocked, cap);
+ status = set_u32(!blocked, cap);
if (ACPI_FAILURE(status))
return -ENODEV;
return 0;
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 4207b26..222ffb89 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -16,6 +16,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -31,6 +33,7 @@
#include <linux/input.h>
#include <linux/rfkill.h>
#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
#define EEEPC_LAPTOP_VERSION "0.1"
@@ -40,11 +43,6 @@
#define EEEPC_HOTK_DEVICE_NAME "Hotkey"
#define EEEPC_HOTK_HID "ASUS010"
-#define EEEPC_LOG EEEPC_HOTK_FILE ": "
-#define EEEPC_ERR KERN_ERR EEEPC_LOG
-#define EEEPC_WARNING KERN_WARNING EEEPC_LOG
-#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG
-#define EEEPC_INFO KERN_INFO EEEPC_LOG
/*
* Definitions for Asus EeePC
@@ -141,8 +139,11 @@
u16 event_count[128]; /* count for each event */
struct input_dev *inputdev;
u16 *keycode_map;
- struct rfkill *eeepc_wlan_rfkill;
- struct rfkill *eeepc_bluetooth_rfkill;
+ struct rfkill *wlan_rfkill;
+ struct rfkill *bluetooth_rfkill;
+ struct rfkill *wwan3g_rfkill;
+ struct hotplug_slot *hotplug_slot;
+ struct work_struct hotplug_work;
};
/* The actual device the driver binds to */
@@ -213,6 +214,15 @@
},
};
+/* PCI hotplug ops */
+static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
+ .owner = THIS_MODULE,
+ .get_adapter_status = eeepc_get_adapter_status,
+ .get_power_status = eeepc_get_adapter_status,
+};
+
/* The backlight device /sys/class/backlight */
static struct backlight_device *eeepc_backlight_device;
@@ -274,20 +284,20 @@
if (method == NULL)
return -ENODEV;
if (write_acpi_int(ehotk->handle, method, value, NULL))
- printk(EEEPC_WARNING "Error writing %s\n", method);
+ pr_warning("Error writing %s\n", method);
}
return 0;
}
static int get_acpi(int cm)
{
- int value = -1;
+ int value = -ENODEV;
if ((ehotk->cm_supported & (0x1 << cm))) {
const char *method = cm_getv[cm];
if (method == NULL)
return -ENODEV;
if (read_acpi_int(ehotk->handle, method, &value))
- printk(EEEPC_WARNING "Error reading %s\n", method);
+ pr_warning("Error reading %s\n", method);
}
return value;
}
@@ -359,13 +369,19 @@
rv = parse_arg(buf, count, &value);
if (rv > 0)
- set_acpi(cm, value);
+ value = set_acpi(cm, value);
+ if (value < 0)
+ return value;
return rv;
}
static ssize_t show_sys_acpi(int cm, char *buf)
{
- return sprintf(buf, "%d\n", get_acpi(cm));
+ int value = get_acpi(cm);
+
+ if (value < 0)
+ return value;
+ return sprintf(buf, "%d\n", value);
}
#define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \
@@ -539,6 +555,28 @@
return -EINVAL;
}
+static void cmsg_quirk(int cm, const char *name)
+{
+ int dummy;
+
+ /* Some BIOSes do not report cm although it is avaliable.
+ Check if cm_getv[cm] works and, if yes, assume cm should be set. */
+ if (!(ehotk->cm_supported & (1 << cm))
+ && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) {
+ pr_info("%s (%x) not reported by BIOS,"
+ " enabling anyway\n", name, 1 << cm);
+ ehotk->cm_supported |= 1 << cm;
+ }
+}
+
+static void cmsg_quirks(void)
+{
+ cmsg_quirk(CM_ASL_LID, "LID");
+ cmsg_quirk(CM_ASL_TYPE, "TYPE");
+ cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER");
+ cmsg_quirk(CM_ASL_TPD, "TPD");
+}
+
static int eeepc_hotk_check(void)
{
const struct key_entry *key;
@@ -551,26 +589,24 @@
if (ehotk->device->status.present) {
if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
&buffer)) {
- printk(EEEPC_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
} else {
- printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
- ehotk->init_flag);
+ pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag);
}
/* get control methods supported */
if (read_acpi_int(ehotk->handle, "CMSG"
, &ehotk->cm_supported)) {
- printk(EEEPC_ERR
- "Get control methods supported failed\n");
+ pr_err("Get control methods supported failed\n");
return -ENODEV;
} else {
- printk(EEEPC_INFO
- "Get control methods supported: 0x%x\n",
- ehotk->cm_supported);
+ cmsg_quirks();
+ pr_info("Get control methods supported: 0x%x\n",
+ ehotk->cm_supported);
}
ehotk->inputdev = input_allocate_device();
if (!ehotk->inputdev) {
- printk(EEEPC_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
ehotk->inputdev->name = "Asus EeePC extra buttons";
@@ -589,12 +625,12 @@
}
result = input_register_device(ehotk->inputdev);
if (result) {
- printk(EEEPC_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(ehotk->inputdev);
return 0;
}
} else {
- printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
return 0;
@@ -612,14 +648,27 @@
return -1;
}
-static void eeepc_rfkill_hotplug(void)
+static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
+ u8 *value)
+{
+ int val = get_acpi(CM_ASL_WLAN);
+
+ if (val == 1 || val == 0)
+ *value = val;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+static void eeepc_hotplug_work(struct work_struct *work)
{
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
bool blocked;
if (!bus) {
- printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+ pr_warning("Unable to find PCI bus 1?\n");
return;
}
@@ -635,7 +684,7 @@
if (dev) {
pci_bus_assign_resources(bus);
if (pci_bus_add_device(dev))
- printk(EEEPC_ERR "Unable to hotplug wifi\n");
+ pr_err("Unable to hotplug wifi\n");
}
} else {
dev = pci_get_slot(bus, 0);
@@ -645,7 +694,7 @@
}
}
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
+ rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -653,7 +702,7 @@
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug();
+ schedule_work(&ehotk->hotplug_work);
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
@@ -718,8 +767,7 @@
eeepc_rfkill_notify,
NULL);
if (ACPI_FAILURE(status))
- printk(EEEPC_WARNING
- "Failed to register notify on %s\n", node);
+ pr_warning("Failed to register notify on %s\n", node);
} else
return -ENODEV;
@@ -738,19 +786,66 @@
ACPI_SYSTEM_NOTIFY,
eeepc_rfkill_notify);
if (ACPI_FAILURE(status))
- printk(EEEPC_ERR
- "Error removing rfkill notify handler %s\n",
+ pr_err("Error removing rfkill notify handler %s\n",
node);
}
}
+static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
+{
+ kfree(hotplug_slot->info);
+ kfree(hotplug_slot);
+}
+
+static int eeepc_setup_pci_hotplug(void)
+{
+ int ret = -ENOMEM;
+ struct pci_bus *bus = pci_find_bus(0, 1);
+
+ if (!bus) {
+ pr_err("Unable to find wifi PCI bus\n");
+ return -ENODEV;
+ }
+
+ ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
+ if (!ehotk->hotplug_slot)
+ goto error_slot;
+
+ ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
+ GFP_KERNEL);
+ if (!ehotk->hotplug_slot->info)
+ goto error_info;
+
+ ehotk->hotplug_slot->private = ehotk;
+ ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug;
+ ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops;
+ eeepc_get_adapter_status(ehotk->hotplug_slot,
+ &ehotk->hotplug_slot->info->adapter_status);
+
+ ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi");
+ if (ret) {
+ pr_err("Unable to register hotplug slot - %d\n", ret);
+ goto error_register;
+ }
+
+ return 0;
+
+error_register:
+ kfree(ehotk->hotplug_slot->info);
+error_info:
+ kfree(ehotk->hotplug_slot);
+ ehotk->hotplug_slot = NULL;
+error_slot:
+ return ret;
+}
+
static int eeepc_hotk_add(struct acpi_device *device)
{
int result;
if (!device)
return -EINVAL;
- printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+ pr_notice(EEEPC_HOTK_NAME "\n");
ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
if (!ehotk)
return -ENOMEM;
@@ -764,53 +859,8 @@
if (result)
goto ehotk_fail;
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
- if (get_acpi(CM_ASL_WLAN) != -1) {
- ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
- &device->dev,
- RFKILL_TYPE_WLAN,
- &eeepc_rfkill_ops,
- (void *)CM_ASL_WLAN);
-
- if (!ehotk->eeepc_wlan_rfkill)
- goto wlan_fail;
-
- rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
- get_acpi(CM_ASL_WLAN) != 1);
- result = rfkill_register(ehotk->eeepc_wlan_rfkill);
- if (result)
- goto wlan_fail;
- }
-
- if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
- ehotk->eeepc_bluetooth_rfkill =
- rfkill_alloc("eeepc-bluetooth",
- &device->dev,
- RFKILL_TYPE_BLUETOOTH,
- &eeepc_rfkill_ops,
- (void *)CM_ASL_BLUETOOTH);
-
- if (!ehotk->eeepc_bluetooth_rfkill)
- goto bluetooth_fail;
-
- rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
- get_acpi(CM_ASL_BLUETOOTH) != 1);
- result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
- if (result)
- goto bluetooth_fail;
- }
-
return 0;
- bluetooth_fail:
- rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
- rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- wlan_fail:
- rfkill_destroy(ehotk->eeepc_wlan_rfkill);
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
ehotk_fail:
kfree(ehotk);
ehotk = NULL;
@@ -823,16 +873,13 @@
if (!device || !acpi_driver_data(device))
return -EINVAL;
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
-
kfree(ehotk);
return 0;
}
static int eeepc_hotk_resume(struct acpi_device *device)
{
- if (ehotk->eeepc_wlan_rfkill) {
+ if (ehotk->wlan_rfkill) {
bool wlan;
/* Workaround - it seems that _PTS disables the wireless
@@ -844,14 +891,13 @@
wlan = get_acpi(CM_ASL_WLAN);
set_acpi(CM_ASL_WLAN, wlan);
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
- wlan != 1);
+ rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
- eeepc_rfkill_hotplug();
+ schedule_work(&ehotk->hotplug_work);
}
- if (ehotk->eeepc_bluetooth_rfkill)
- rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ if (ehotk->bluetooth_rfkill)
+ rfkill_set_sw_state(ehotk->bluetooth_rfkill,
get_acpi(CM_ASL_BLUETOOTH) != 1);
return 0;
@@ -973,10 +1019,16 @@
static void eeepc_rfkill_exit(void)
{
- if (ehotk->eeepc_wlan_rfkill)
- rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- if (ehotk->eeepc_bluetooth_rfkill)
- rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
+ if (ehotk->wlan_rfkill)
+ rfkill_unregister(ehotk->wlan_rfkill);
+ if (ehotk->bluetooth_rfkill)
+ rfkill_unregister(ehotk->bluetooth_rfkill);
+ if (ehotk->wwan3g_rfkill)
+ rfkill_unregister(ehotk->wwan3g_rfkill);
+ if (ehotk->hotplug_slot)
+ pci_hp_deregister(ehotk->hotplug_slot);
}
static void eeepc_input_exit(void)
@@ -1011,6 +1063,77 @@
platform_driver_unregister(&platform_driver);
}
+static int eeepc_new_rfkill(struct rfkill **rfkill,
+ const char *name, struct device *dev,
+ enum rfkill_type type, int cm)
+{
+ int result;
+
+ result = get_acpi(cm);
+ if (result < 0)
+ return result;
+
+ *rfkill = rfkill_alloc(name, dev, type,
+ &eeepc_rfkill_ops, (void *)(unsigned long)cm);
+
+ if (!*rfkill)
+ return -EINVAL;
+
+ rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1);
+ result = rfkill_register(*rfkill);
+ if (result) {
+ rfkill_destroy(*rfkill);
+ *rfkill = NULL;
+ return result;
+ }
+ return 0;
+}
+
+
+static int eeepc_rfkill_init(struct device *dev)
+{
+ int result = 0;
+
+ INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work);
+
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
+ result = eeepc_new_rfkill(&ehotk->wlan_rfkill,
+ "eeepc-wlan", dev,
+ RFKILL_TYPE_WLAN, CM_ASL_WLAN);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill,
+ "eeepc-bluetooth", dev,
+ RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill,
+ "eeepc-wwan3g", dev,
+ RFKILL_TYPE_WWAN, CM_ASL_3G);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_setup_pci_hotplug();
+ /*
+ * If we get -EBUSY then something else is handling the PCI hotplug -
+ * don't fail in this case
+ */
+ if (result == -EBUSY)
+ result = 0;
+
+exit:
+ if (result && result != -ENODEV)
+ eeepc_rfkill_exit();
+ return result;
+}
+
static int eeepc_backlight_init(struct device *dev)
{
struct backlight_device *bd;
@@ -1018,8 +1141,7 @@
bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
NULL, &eeepcbl_ops);
if (IS_ERR(bd)) {
- printk(EEEPC_ERR
- "Could not register eeepc backlight device\n");
+ pr_err("Could not register eeepc backlight device\n");
eeepc_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -1038,8 +1160,7 @@
hwmon = hwmon_device_register(dev);
if (IS_ERR(hwmon)) {
- printk(EEEPC_ERR
- "Could not register eeepc hwmon device\n");
+ pr_err("Could not register eeepc hwmon device\n");
eeepc_hwmon_device = NULL;
return PTR_ERR(hwmon);
}
@@ -1065,19 +1186,6 @@
acpi_bus_unregister_driver(&eeepc_hotk_driver);
return -ENODEV;
}
- dev = acpi_get_physical_device(ehotk->device->handle);
-
- if (!acpi_video_backlight_support()) {
- result = eeepc_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(EEEPC_INFO "Backlight controlled by ACPI video "
- "driver\n");
-
- result = eeepc_hwmon_init(dev);
- if (result)
- goto fail_hwmon;
eeepc_enable_camera();
@@ -1097,7 +1205,33 @@
&platform_attribute_group);
if (result)
goto fail_sysfs;
+
+ dev = &platform_device->dev;
+
+ if (!acpi_video_backlight_support()) {
+ result = eeepc_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Backlight controlled by ACPI video "
+ "driver\n");
+
+ result = eeepc_hwmon_init(dev);
+ if (result)
+ goto fail_hwmon;
+
+ result = eeepc_rfkill_init(dev);
+ if (result)
+ goto fail_rfkill;
+
return 0;
+fail_rfkill:
+ eeepc_hwmon_exit();
+fail_hwmon:
+ eeepc_backlight_exit();
+fail_backlight:
+ sysfs_remove_group(&platform_device->dev.kobj,
+ &platform_attribute_group);
fail_sysfs:
platform_device_del(platform_device);
fail_platform_device2:
@@ -1105,12 +1239,7 @@
fail_platform_device1:
platform_driver_unregister(&platform_driver);
fail_platform_driver:
- eeepc_hwmon_exit();
-fail_hwmon:
- eeepc_backlight_exit();
-fail_backlight:
eeepc_input_exit();
- eeepc_rfkill_exit();
return result;
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 4ac2311..a2ad53e 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -171,7 +171,7 @@
static int hp_wmi_set_block(void *data, bool blocked)
{
unsigned long b = (unsigned long) data;
- int query = BIT(b + 8) | ((!!blocked) << b);
+ int query = BIT(b + 8) | ((!blocked) << b);
return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
}
@@ -520,11 +520,13 @@
* the input layer will only actually pass it on if the state
* changed.
*/
-
- input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
- input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
- hp_wmi_tablet_state());
- input_sync(hp_wmi_input_dev);
+ if (hp_wmi_input_dev) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+ }
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a463fd7..e856008 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -239,12 +239,6 @@
};
static struct {
-#ifdef CONFIG_THINKPAD_ACPI_BAY
- u32 bay_status:1;
- u32 bay_eject:1;
- u32 bay_status2:1;
- u32 bay_eject2:1;
-#endif
u32 bluetooth:1;
u32 hotkey:1;
u32 hotkey_mask:1;
@@ -589,18 +583,6 @@
return 1;
}
-#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY)
-static int _sta(acpi_handle handle)
-{
- int status;
-
- if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
- status = 0;
-
- return status;
-}
-#endif
-
static int issue_thinkpad_cmos_command(int cmos_cmd)
{
if (!cmos_handle)
@@ -784,6 +766,8 @@
if (!ibm || !ibm->write)
return -EINVAL;
+ if (count > PAGE_SIZE - 2)
+ return -EINVAL;
kernbuf = kmalloc(count + 2, GFP_KERNEL);
if (!kernbuf)
@@ -4442,293 +4426,6 @@
};
/*************************************************************************
- * Dock subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-
-static void dock_notify(struct ibm_struct *ibm, u32 event);
-static int dock_read(char *p);
-static int dock_write(char *buf);
-
-TPACPI_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
- "\\_SB.PCI0.DOCK", /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
- "\\_SB.PCI0.PCI1.DOCK", /* all others */
- "\\_SB.PCI.ISA.SLCE", /* 570 */
- ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-TPACPI_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
-
-static const struct acpi_device_id ibm_pci_device_ids[] = {
- {PCI_ROOT_HID_STRING, 0},
- {"", 0},
-};
-
-static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
- {
- .notify = dock_notify,
- .handle = &dock_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
- {
- /* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
- * We just use it to get notifications of dock hotplug
- * in very old thinkpads */
- .hid = ibm_pci_device_ids,
- .notify = dock_notify,
- .handle = &pci_handle,
- .type = ACPI_SYSTEM_NOTIFY,
- },
-};
-
-static struct ibm_struct dock_driver_data[2] = {
- {
- .name = "dock",
- .read = dock_read,
- .write = dock_write,
- .acpi = &ibm_dock_acpidriver[0],
- },
- {
- .name = "dock",
- .acpi = &ibm_dock_acpidriver[1],
- },
-};
-
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int __init dock_init(struct ibm_init_struct *iibm)
-{
- vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
-
- TPACPI_ACPIHANDLE_INIT(dock);
-
- vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
- str_supported(dock_handle != NULL));
-
- return (dock_handle)? 0 : 1;
-}
-
-static int __init dock_init2(struct ibm_init_struct *iibm)
-{
- int dock2_needed;
-
- vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
-
- if (dock_driver_data[0].flags.acpi_driver_registered &&
- dock_driver_data[0].flags.acpi_notify_installed) {
- TPACPI_ACPIHANDLE_INIT(pci);
- dock2_needed = (pci_handle != NULL);
- vdbg_printk(TPACPI_DBG_INIT,
- "dock PCI handler for the TP 570 is %s\n",
- str_supported(dock2_needed));
- } else {
- vdbg_printk(TPACPI_DBG_INIT,
- "dock subdriver part 2 not required\n");
- dock2_needed = 0;
- }
-
- return (dock2_needed)? 0 : 1;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
- int docked = dock_docked();
- int pci = ibm->acpi->hid && ibm->acpi->device &&
- acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
- int data;
-
- if (event == 1 && !pci) /* 570 */
- data = 1; /* button */
- else if (event == 1 && pci) /* 570 */
- data = 3; /* dock */
- else if (event == 3 && docked)
- data = 1; /* button */
- else if (event == 3 && !docked)
- data = 2; /* undock */
- else if (event == 0 && docked)
- data = 3; /* dock */
- else {
- printk(TPACPI_ERR "unknown dock event %d, status %d\n",
- event, _sta(dock_handle));
- data = 0; /* unknown */
- }
- acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- dev_name(&ibm->acpi->device->dev),
- event, data);
-}
-
-static int dock_read(char *p)
-{
- int len = 0;
- int docked = dock_docked();
-
- if (!dock_handle)
- len += sprintf(p + len, "status:\t\tnot supported\n");
- else if (!docked)
- len += sprintf(p + len, "status:\t\tundocked\n");
- else {
- len += sprintf(p + len, "status:\t\tdocked\n");
- len += sprintf(p + len, "commands:\tdock, undock\n");
- }
-
- return len;
-}
-
-static int dock_write(char *buf)
-{
- char *cmd;
-
- if (!dock_docked())
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (strlencmp(cmd, "undock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
- !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
- return -EIO;
- } else if (strlencmp(cmd, "dock") == 0) {
- if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-#endif /* CONFIG_THINKPAD_ACPI_DOCK */
-
-/*************************************************************************
- * Bay subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-
-TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
- "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
- "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
- "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
- ); /* A21e, R30, R31 */
-TPACPI_HANDLE(bay_ej, bay, "_EJ3", /* 600e/x, A2xm/p, A3x */
- "_EJ0", /* all others */
- ); /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */
- "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
- ); /* all others */
-TPACPI_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
- "_EJ0", /* 770x */
- ); /* all others */
-
-static int __init bay_init(struct ibm_init_struct *iibm)
-{
- vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
-
- TPACPI_ACPIHANDLE_INIT(bay);
- if (bay_handle)
- TPACPI_ACPIHANDLE_INIT(bay_ej);
- TPACPI_ACPIHANDLE_INIT(bay2);
- if (bay2_handle)
- TPACPI_ACPIHANDLE_INIT(bay2_ej);
-
- tp_features.bay_status = bay_handle &&
- acpi_evalf(bay_handle, NULL, "_STA", "qv");
- tp_features.bay_status2 = bay2_handle &&
- acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
- tp_features.bay_eject = bay_handle && bay_ej_handle &&
- (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
- tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
- (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
- vdbg_printk(TPACPI_DBG_INIT,
- "bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
- str_supported(tp_features.bay_status),
- str_supported(tp_features.bay_eject),
- str_supported(tp_features.bay_status2),
- str_supported(tp_features.bay_eject2));
-
- return (tp_features.bay_status || tp_features.bay_eject ||
- tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
- acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
- acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- dev_name(&ibm->acpi->device->dev),
- event, 0);
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
- int len = 0;
- int occupied = bay_occupied(bay);
- int occupied2 = bay_occupied(bay2);
- int eject, eject2;
-
- len += sprintf(p + len, "status:\t\t%s\n",
- tp_features.bay_status ?
- (occupied ? "occupied" : "unoccupied") :
- "not supported");
- if (tp_features.bay_status2)
- len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
- "occupied" : "unoccupied");
-
- eject = tp_features.bay_eject && occupied;
- eject2 = tp_features.bay_eject2 && occupied2;
-
- if (eject && eject2)
- len += sprintf(p + len, "commands:\teject, eject2\n");
- else if (eject)
- len += sprintf(p + len, "commands:\teject\n");
- else if (eject2)
- len += sprintf(p + len, "commands:\teject2\n");
-
- return len;
-}
-
-static int bay_write(char *buf)
-{
- char *cmd;
-
- if (!tp_features.bay_eject && !tp_features.bay_eject2)
- return -ENODEV;
-
- while ((cmd = next_cmd(&buf))) {
- if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
- if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else if (tp_features.bay_eject2 &&
- strlencmp(cmd, "eject2") == 0) {
- if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
- return -EIO;
- } else
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
- .notify = bay_notify,
- .handle = &bay_handle,
- .type = ACPI_SYSTEM_NOTIFY,
-};
-
-static struct ibm_struct bay_driver_data = {
- .name = "bay",
- .read = bay_read,
- .write = bay_write,
- .acpi = &ibm_bay_acpidriver,
-};
-
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
-
-/*************************************************************************
* CMOS subdriver
*/
@@ -5945,14 +5642,48 @@
/* --------------------------------------------------------------------- */
+/*
+ * These are only useful for models that have only one possibility
+ * of GPU. If the BIOS model handles both ATI and Intel, don't use
+ * these quirks.
+ */
+#define TPACPI_BRGHT_Q_NOEC 0x0001 /* Must NOT use EC HBRV */
+#define TPACPI_BRGHT_Q_EC 0x0002 /* Should or must use EC HBRV */
+#define TPACPI_BRGHT_Q_ASK 0x8000 /* Ask for user report */
+
+static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
+ /* Models with ATI GPUs known to require ECNVRAM mode */
+ TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */
+
+ /* Models with ATI GPUs (waiting confirmation) */
+ TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+
+ /* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+ TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+ TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+
+ /* Models with Intel GMA900 */
+ TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
+ TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC), /* X41 */
+ TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC), /* X41 Tablet */
+};
+
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
mutex_init(&brightness_mutex);
+ quirks = tpacpi_check_quirks(brightness_quirk_table,
+ ARRAY_SIZE(brightness_quirk_table));
+
/*
* We always attempt to detect acpi support, so as to switch
* Lenovo Vista BIOS to ACPI brightness mode even if we are not
@@ -6009,23 +5740,13 @@
/* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
brightness_mode == TPACPI_BRGHT_MODE_MAX) {
- if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
- /*
- * IBM models that define HBRV probably have
- * EC-based backlight level control
- */
- if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
- /* T40-T43, R50-R52, R50e, R51e, X31-X41 */
- brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
- else
- /* all other IBM ThinkPads */
- brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
- } else
- /* All Lenovo ThinkPads */
+ if (quirks & TPACPI_BRGHT_Q_EC)
+ brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
+ else
brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
dbg_printk(TPACPI_DBG_BRGHT,
- "selected brightness_mode=%d\n",
+ "driver auto-selected brightness_mode=%d\n",
brightness_mode);
}
@@ -6052,6 +5773,15 @@
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
+ if (quirks & TPACPI_BRGHT_Q_ASK) {
+ printk(TPACPI_NOTICE
+ "brightness: will use unverified default: "
+ "brightness_mode=%d\n", brightness_mode);
+ printk(TPACPI_NOTICE
+ "brightness: please report to %s whether it works well "
+ "or not on your ThinkPad\n", TPACPI_MAIL);
+ }
+
ibm_backlight_device->props.max_brightness =
(tp_features.bright_16levels)? 15 : 7;
ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
@@ -7854,22 +7584,6 @@
.init = light_init,
.data = &light_driver_data,
},
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
- {
- .init = dock_init,
- .data = &dock_driver_data[0],
- },
- {
- .init = dock_init2,
- .data = &dock_driver_data[1],
- },
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
- {
- .init = bay_init,
- .data = &bay_driver_data,
- },
-#endif
{
.init = cmos_init,
.data = &cmos_driver_data,
@@ -7968,12 +7682,6 @@
TPACPI_PARAM(bluetooth);
TPACPI_PARAM(video);
TPACPI_PARAM(light);
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-TPACPI_PARAM(dock);
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-TPACPI_PARAM(bay);
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
TPACPI_PARAM(cmos);
TPACPI_PARAM(led);
TPACPI_PARAM(beep);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7eda348..bdbc4f7 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -43,6 +43,13 @@
help
Say Y here to enable support for batteries with ds2760 chip.
+config BATTERY_DS2782
+ tristate "DS2782 standalone gas-gauge"
+ depends on I2C
+ help
+ Say Y here to enable support for the DS2782 standalone battery
+ gas-gauge.
+
config BATTERY_PMU
tristate "Apple PMU battery"
depends on PPC32 && ADB_PMU
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index daf3179..380d17c 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
new file mode 100644
index 0000000..da14f37
--- /dev/null
+++ b/drivers/power/ds2782_battery.c
@@ -0,0 +1,330 @@
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB 0x0c
+#define DS2782_REG_TEMP_MSB 0x0a
+#define DS2782_REG_CURRENT_MSB 0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS 1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+ struct i2c_client *client;
+ struct power_supply battery;
+ int id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(info->client, reg);
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+ s16 *val)
+{
+ int ret;
+
+ ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Temperature is measured in units of 0.125 degrees celcius, the
+ * power_supply class measures temperature in tenths of degrees
+ * celsius. The temperature value is stored as a 10 bit number, plus
+ * sign in the upper bits of a 16 bit register.
+ */
+ err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+ if (err)
+ return err;
+ *temp = ((raw / 32) * 125) / 100;
+ return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+ int sense_res;
+ int err;
+ u8 sense_res_raw;
+ s16 raw;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+ if (err)
+ return err;
+ if (sense_res_raw == 0) {
+ dev_err(&info->client->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+ sense_res);
+ err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+ if (err)
+ return err;
+ *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Voltage is measured in units of 4.88mV. The voltage is stored as
+ * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ */
+ err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+ if (err)
+ return err;
+ *voltage_uA = (raw / 32) * 4800;
+ return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+ int err;
+ u8 raw;
+
+ err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+ if (err)
+ return err;
+ *capacity = raw;
+ return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+ int err;
+ int current_uA;
+ int capacity;
+
+ err = ds2782_get_current(info, ¤t_uA);
+ if (err)
+ return err;
+
+ err = ds2782_get_capacity(info, &capacity);
+ if (err)
+ return err;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct ds2782_info *info = to_ds2782_info(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2782_get_status(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2782_get_capacity(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2782_get_voltage(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2782_get_current(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2782_get_temp(info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+ battery->type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->properties = ds2782_battery_props;
+ battery->num_properties = ARRAY_SIZE(ds2782_battery_props);
+ battery->get_property = ds2782_battery_get_property;
+ battery->external_power_changed = NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+ struct ds2782_info *info = i2c_get_clientdata(client);
+
+ power_supply_unregister(&info->battery);
+ kfree(info->battery.name);
+
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, info->id);
+ mutex_unlock(&battery_lock);
+
+ i2c_set_clientdata(client, info);
+
+ kfree(info);
+ return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds2782_info *info;
+ int ret;
+ int num;
+
+ /* Get an ID for this battery */
+ ret = idr_pre_get(&battery_id, GFP_KERNEL);
+ if (ret == 0) {
+ ret = -ENOMEM;
+ goto fail_id;
+ }
+
+ mutex_lock(&battery_lock);
+ ret = idr_get_new(&battery_id, client, &num);
+ mutex_unlock(&battery_lock);
+ if (ret < 0)
+ goto fail_id;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ ret = -ENOMEM;
+ goto fail_info;
+ }
+
+ info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+ if (!info->battery.name) {
+ ret = -ENOMEM;
+ goto fail_name;
+ }
+
+ i2c_set_clientdata(client, info);
+ info->client = client;
+ ds2782_power_supply_init(&info->battery);
+
+ ret = power_supply_register(&client->dev, &info->battery);
+ if (ret) {
+ dev_err(&client->dev, "failed to register battery\n");
+ goto fail_register;
+ }
+
+ return 0;
+
+fail_register:
+ kfree(info->battery.name);
+fail_name:
+ i2c_set_clientdata(client, info);
+ kfree(info);
+fail_info:
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, num);
+ mutex_unlock(&battery_lock);
+fail_id:
+ return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+ {"ds2782", 0},
+ {},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+ .driver = {
+ .name = "ds2782-battery",
+ },
+ .probe = ds2782_battery_probe,
+ .remove = ds2782_battery_remove,
+ .id_table = ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+ return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+ i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index 5fbca26..58e4192 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -35,6 +36,7 @@
#define BAT_STAT_AC 0x10
#define BAT_STAT_CHARGING 0x20
#define BAT_STAT_DISCHARGING 0x40
+#define BAT_STAT_TRICKLE 0x80
#define BAT_ERR_INFOFAIL 0x02
#define BAT_ERR_OVERVOLTAGE 0x04
@@ -89,7 +91,7 @@
static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
{
if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
+ if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +221,8 @@
It doesn't matter though -- the EC will return the last-known
information, and it's as if we just ran that _little_ bit faster
and managed to read it out before the battery went away. */
- if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+ if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+ psp != POWER_SUPPLY_PROP_PRESENT)
return -ENODEV;
switch (psp) {
@@ -229,7 +232,8 @@
return ret;
break;
case POWER_SUPPLY_PROP_PRESENT:
- val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+ val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+ BAT_STAT_TRICKLE));
break;
case POWER_SUPPLY_PROP_HEALTH:
@@ -334,21 +338,21 @@
struct bin_attribute *attr, char *buf, loff_t off, size_t count)
{
uint8_t ec_byte;
- int ret, end;
+ int ret;
+ int i;
if (off >= EEPROM_SIZE)
return 0;
if (off + count > EEPROM_SIZE)
count = EEPROM_SIZE - off;
- end = EEPROM_START + off + count;
- for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
- &buf[ec_byte - EEPROM_START], 1);
+ for (i = 0; i < count; i++) {
+ ec_byte = EEPROM_START + off + i;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
if (ret) {
- printk(KERN_ERR "olpc-battery: EC command "
- "EC_BAT_EEPROM @ 0x%x failed -"
- " %d!\n", ec_byte, ret);
+ pr_err("olpc-battery: "
+ "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+ ec_byte, ret);
return -EIO;
}
}
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 8bde921..b787335 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -33,14 +33,14 @@
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->batt_aux) * pdata->batt_mult /
pdata->batt_div;
}
static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->temp_aux) * pdata->temp_mult /
pdata->temp_div;
}
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index aafd3e6..a118eb0 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,8 +1,8 @@
/*
* Blackfin On-Chip Real Time Clock Driver
- * Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
+ * Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
*
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -363,7 +363,7 @@
struct bfin_rtc *rtc;
struct device *dev = &pdev->dev;
int ret = 0;
- unsigned long timeout;
+ unsigned long timeout = jiffies + HZ;
dev_dbg_stamp(dev);
@@ -374,32 +374,32 @@
platform_set_drvdata(pdev, rtc);
device_init_wakeup(dev, 1);
+ /* Register our RTC with the RTC framework */
+ rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops,
+ THIS_MODULE);
+ if (unlikely(IS_ERR(rtc->rtc_dev))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err;
+ }
+
/* Grab the IRQ and init the hardware */
ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
if (unlikely(ret))
- goto err;
+ goto err_reg;
/* sometimes the bootloader touched things, but the write complete was not
* enabled, so let's just do a quick timeout here since the IRQ will not fire ...
*/
- timeout = jiffies + HZ;
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
if (time_after(jiffies, timeout))
break;
bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
bfin_write_RTC_SWCNT(0);
- /* Register our RTC with the RTC framework */
- rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
- if (unlikely(IS_ERR(rtc->rtc_dev))) {
- ret = PTR_ERR(rtc->rtc_dev);
- goto err_irq;
- }
-
return 0;
- err_irq:
- free_irq(IRQ_RTC, dev);
- err:
+err_reg:
+ rtc_device_unregister(rtc->rtc_dev);
+err:
kfree(rtc);
return ret;
}
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 23e10b6..f7a4701 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1174,23 +1174,34 @@
}
};
+#ifdef CONFIG_PNP
+static bool pnp_driver_registered;
+#endif
+static bool platform_driver_registered;
+
static int __init cmos_init(void)
{
int retval = 0;
#ifdef CONFIG_PNP
- pnp_register_driver(&cmos_pnp_driver);
+ retval = pnp_register_driver(&cmos_pnp_driver);
+ if (retval == 0)
+ pnp_driver_registered = true;
#endif
- if (!cmos_rtc.dev)
+ if (!cmos_rtc.dev) {
retval = platform_driver_probe(&cmos_platform_driver,
cmos_platform_probe);
+ if (retval == 0)
+ platform_driver_registered = true;
+ }
if (retval == 0)
return 0;
#ifdef CONFIG_PNP
- pnp_unregister_driver(&cmos_pnp_driver);
+ if (pnp_driver_registered)
+ pnp_unregister_driver(&cmos_pnp_driver);
#endif
return retval;
}
@@ -1199,9 +1210,11 @@
static void __exit cmos_exit(void)
{
#ifdef CONFIG_PNP
- pnp_unregister_driver(&cmos_pnp_driver);
+ if (pnp_driver_registered)
+ pnp_unregister_driver(&cmos_pnp_driver);
#endif
- platform_driver_unregister(&cmos_platform_driver);
+ if (platform_driver_registered)
+ platform_driver_unregister(&cmos_platform_driver);
}
module_exit(cmos_exit);
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 32b2773..713f7bf 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -283,7 +283,7 @@
stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
if (stat < 0)
- return;
+ goto unlock;
if (stat & DS1374_REG_SR_AF) {
stat &= ~DS1374_REG_SR_AF;
@@ -302,7 +302,7 @@
out:
if (!ds1374->exiting)
enable_irq(client->irq);
-
+unlock:
mutex_unlock(&ds1374->mutex);
}
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index f11297a..2c839d0 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -1,7 +1,7 @@
/*
* Driver for NEC VR4100 series Real Time Clock unit.
*
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,7 +33,7 @@
#include <asm/io.h>
#include <asm/uaccess.h>
-MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index f8b1f04..c11770f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1696,8 +1696,7 @@
DBF_DEV_EVENT(DBF_ERR, device, "%s",
"unsolicited interrupt received "
"(sense available)");
- device->discipline->dump_sense_dbf(device, NULL, irb,
- "unsolicited");
+ device->discipline->dump_sense_dbf(device, irb, "unsolicited");
}
dasd_schedule_device_bh(device);
@@ -2941,42 +2940,20 @@
}
static void
-dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
- struct irb *irb, char *reason)
+dasd_eckd_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
+ char *reason)
{
u64 *sense;
- int sl;
- struct tsb *tsb;
- sense = NULL;
- tsb = NULL;
- if (req && scsw_is_tm(&req->irb.scsw)) {
- if (irb->scsw.tm.tcw)
- tsb = tcw_get_tsb(
- (struct tcw *)(unsigned long)irb->scsw.tm.tcw);
- if (tsb && (irb->scsw.tm.fcxs == 0x01)) {
- switch (tsb->flags & 0x07) {
- case 1: /* tsa_iostat */
- sense = (u64 *)tsb->tsa.iostat.sense;
- break;
- case 2: /* ts_ddpc */
- sense = (u64 *)tsb->tsa.ddpc.sense;
- break;
- case 3: /* tsa_intrg */
- break;
- }
- }
- } else {
- if (irb->esw.esw0.erw.cons)
- sense = (u64 *)irb->ecw;
- }
+ sense = (u64 *) dasd_get_sense(irb);
if (sense) {
- for (sl = 0; sl < 4; sl++) {
- DBF_DEV_EVENT(DBF_EMERG, device,
- "%s: %016llx %016llx %016llx %016llx",
- reason, sense[0], sense[1], sense[2],
- sense[3]);
- }
+ DBF_DEV_EVENT(DBF_EMERG, device,
+ "%s: %s %02x%02x%02x %016llx %016llx %016llx "
+ "%016llx", reason,
+ scsw_is_tm(&irb->scsw) ? "t" : "c",
+ scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
+ scsw_dstat(&irb->scsw), sense[0], sense[1],
+ sense[2], sense[3]);
} else {
DBF_DEV_EVENT(DBF_EMERG, device, "%s",
"SORRY - NO VALID SENSE AVAILABLE\n");
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index d970ce2..cb8f9ce 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -172,7 +172,7 @@
device = cqr->startdev;
/* dump sense data to s390 debugfeature*/
if (device->discipline && device->discipline->dump_sense_dbf)
- device->discipline->dump_sense_dbf(device, cqr, irb, "log");
+ device->discipline->dump_sense_dbf(device, irb, "log");
}
EXPORT_SYMBOL(dasd_log_sense_dbf);
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index e21ee73..31849ad 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -241,7 +241,7 @@
/* check for unsolicited interrupts */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"unsolicited interrupt received");
- device->discipline->dump_sense_dbf(device, NULL, irb, "unsolicited");
+ device->discipline->dump_sense_dbf(device, irb, "unsolicited");
dasd_schedule_device_bh(device);
return;
};
@@ -444,17 +444,20 @@
}
static void
-dasd_fba_dump_sense_dbf(struct dasd_device *device, struct dasd_ccw_req *req,
- struct irb *irb, char *reason)
+dasd_fba_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
+ char *reason)
{
- int sl;
- if (irb->esw.esw0.erw.cons) {
- for (sl = 0; sl < 4; sl++) {
- DBF_DEV_EVENT(DBF_EMERG, device,
- "%s: %08x %08x %08x %08x",
- reason, irb->ecw[8 * 0], irb->ecw[8 * 1],
- irb->ecw[8 * 2], irb->ecw[8 * 3]);
- }
+ u64 *sense;
+
+ sense = (u64 *) dasd_get_sense(irb);
+ if (sense) {
+ DBF_DEV_EVENT(DBF_EMERG, device,
+ "%s: %s %02x%02x%02x %016llx %016llx %016llx "
+ "%016llx", reason,
+ scsw_is_tm(&irb->scsw) ? "t" : "c",
+ scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
+ scsw_dstat(&irb->scsw), sense[0], sense[1],
+ sense[2], sense[3]);
} else {
DBF_DEV_EVENT(DBF_EMERG, device, "%s",
"SORRY - NO VALID SENSE AVAILABLE\n");
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fd63b2f..b699ca3 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -284,8 +284,7 @@
dasd_erp_fn_t(*erp_postaction) (struct dasd_ccw_req *);
void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *,
struct irb *);
- void (*dump_sense_dbf) (struct dasd_device *, struct dasd_ccw_req *,
- struct irb *, char *);
+ void (*dump_sense_dbf) (struct dasd_device *, struct irb *, char *);
void (*handle_unsolicited_interrupt) (struct dasd_device *,
struct irb *);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 4ce3f72..df918ef 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -16,6 +16,7 @@
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/blkpg.h>
+#include <linux/smp_lock.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 016f9e9..d346176 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -964,7 +964,8 @@
break;
}
if (rc)
- pr_err("Suspend failed because device %s is writeable.\n",
+ pr_err("Suspending the system failed because DCSS device %s "
+ "is writable\n",
dev_info->segment_name);
return rc;
}
@@ -987,8 +988,8 @@
goto out_panic;
}
if (start != entry->start || end != entry->end) {
- pr_err("Mismatch of start / end address after "
- "resuming device %s\n",
+ pr_err("The address range of DCSS %s changed "
+ "while the system was suspended\n",
entry->segment_name);
goto out_panic;
}
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 2e9e1ec..db442cd 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -443,7 +443,7 @@
*/
static void xpram_resume_error(const char *message)
{
- pr_err("Resume error: %s\n", message);
+ pr_err("Resuming the system failed: %s\n", message);
panic("xpram resume error\n");
}
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 7892550..3234e90 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -320,7 +320,7 @@
goto out_path;
}
filp->private_data = monpriv;
- dev_set_drvdata(&monreader_device, monpriv);
+ dev_set_drvdata(monreader_device, monpriv);
unlock_kernel();
return nonseekable_open(inode, filp);
@@ -463,7 +463,7 @@
*****************************************************************************/
static int monreader_freeze(struct device *dev)
{
- struct mon_private *monpriv = dev_get_drvdata(&dev);
+ struct mon_private *monpriv = dev_get_drvdata(dev);
int rc;
if (!monpriv)
diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h
index 85f491e..7a7bfc9 100644
--- a/drivers/s390/char/sclp_rw.h
+++ b/drivers/s390/char/sclp_rw.h
@@ -92,5 +92,10 @@
void sclp_set_htab(struct sclp_buffer *, unsigned short);
int sclp_chars_in_buffer(struct sclp_buffer *);
+#ifdef CONFIG_SCLP_CONSOLE
void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event);
+#else
+static inline void sclp_console_pm_event(enum sclp_pm_event sclp_pm_event) { }
+#endif
+
#endif /* __SCLP_RW_H__ */
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index cb7854c..f2bc287 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -250,14 +250,14 @@
static int vmwdt_suspend(void)
{
if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
- pr_err("The watchdog is in use. "
- "This prevents hibernation or suspend.\n");
+ pr_err("The system cannot be suspended while the watchdog"
+ " is in use\n");
return NOTIFY_BAD;
}
if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) {
clear_bit(VMWDT_OPEN, &vmwdt_is_open);
- pr_err("The watchdog is running. "
- "This prevents hibernation or suspend.\n");
+ pr_err("The system cannot be suspended while the watchdog"
+ " is running\n");
return NOTIFY_BAD;
}
return NOTIFY_DONE;
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 727a809..ed3dcde 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1145,12 +1145,17 @@
*/
static inline void ap_schedule_poll_timer(void)
{
+ ktime_t hr_time;
if (ap_using_interrupts() || ap_suspend_flag)
return;
if (hrtimer_is_queued(&ap_poll_timer))
return;
- hrtimer_start(&ap_poll_timer, ktime_set(0, poll_timeout),
- HRTIMER_MODE_ABS);
+ if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
+ hr_time = ktime_set(0, poll_timeout);
+ hrtimer_forward_now(&ap_poll_timer, hr_time);
+ hrtimer_restart(&ap_poll_timer);
+ }
+ return;
}
/**
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 8030e25..c75d6f3 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -553,40 +553,35 @@
_zfcp_erp_unit_reopen(unit, clear, id, ref);
}
-static void zfcp_erp_strategy_followup_actions(struct zfcp_erp_action *act)
+static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
{
- struct zfcp_adapter *adapter = act->adapter;
- struct zfcp_port *port = act->port;
- struct zfcp_unit *unit = act->unit;
- u32 status = act->status;
-
- /* initiate follow-up actions depending on success of finished action */
switch (act->action) {
-
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen_all(adapter, 0, "ersfa_1", NULL);
- else
- _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_2", NULL);
+ _zfcp_erp_adapter_reopen(act->adapter, 0, "ersff_1", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen(port, 0, "ersfa_3", NULL);
- else
- _zfcp_erp_adapter_reopen(adapter, 0, "ersfa_4", NULL);
+ _zfcp_erp_port_forced_reopen(act->port, 0, "ersff_2", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_PORT:
- if (status == ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_unit_reopen_all(port, 0, "ersfa_5", NULL);
- else
- _zfcp_erp_port_forced_reopen(port, 0, "ersfa_6", NULL);
+ _zfcp_erp_port_reopen(act->port, 0, "ersff_3", NULL);
break;
-
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- if (status != ZFCP_ERP_SUCCEEDED)
- _zfcp_erp_port_reopen(unit->port, 0, "ersfa_7", NULL);
+ _zfcp_erp_unit_reopen(act->unit, 0, "ersff_4", NULL);
+ break;
+ }
+}
+
+static void zfcp_erp_strategy_followup_success(struct zfcp_erp_action *act)
+{
+ switch (act->action) {
+ case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
+ _zfcp_erp_port_reopen_all(act->adapter, 0, "ersfs_1", NULL);
+ break;
+ case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
+ _zfcp_erp_port_reopen(act->port, 0, "ersfs_2", NULL);
+ break;
+ case ZFCP_ERP_ACTION_REOPEN_PORT:
+ _zfcp_erp_unit_reopen_all(act->port, 0, "ersfs_3", NULL);
break;
}
}
@@ -801,7 +796,7 @@
return ZFCP_ERP_FAILED;
case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
- if (status & ZFCP_STATUS_PORT_PHYS_OPEN)
+ if (!(status & ZFCP_STATUS_PORT_PHYS_OPEN))
return ZFCP_ERP_SUCCEEDED;
}
return ZFCP_ERP_FAILED;
@@ -853,11 +848,17 @@
gid_pn_work);
retval = zfcp_fc_ns_gid_pn(&port->erp_action);
- if (retval == -ENOMEM)
- zfcp_erp_notify(&port->erp_action, ZFCP_ERP_NOMEM);
- port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
- if (retval)
- zfcp_erp_notify(&port->erp_action, ZFCP_ERP_FAILED);
+ if (!retval) {
+ port->erp_action.step = ZFCP_ERP_STEP_NAMESERVER_LOOKUP;
+ goto out;
+ }
+ if (retval == -ENOMEM) {
+ zfcp_erp_notify(&port->erp_action, ZFCP_STATUS_ERP_LOWMEM);
+ goto out;
+ }
+ /* all other error condtions */
+ zfcp_erp_notify(&port->erp_action, 0);
+out:
zfcp_port_put(port);
}
@@ -1289,7 +1290,10 @@
retval = zfcp_erp_strategy_statechange(erp_action, retval);
if (retval == ZFCP_ERP_EXIT)
goto unlock;
- zfcp_erp_strategy_followup_actions(erp_action);
+ if (retval == ZFCP_ERP_SUCCEEDED)
+ zfcp_erp_strategy_followup_success(erp_action);
+ if (retval == ZFCP_ERP_FAILED)
+ zfcp_erp_strategy_followup_failed(erp_action);
unlock:
write_unlock(&adapter->erp_lock);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 2f0705d..47daebf 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -79,11 +79,9 @@
mutex_unlock(&wka_port->mutex);
- wait_event_timeout(
- wka_port->completion_wq,
- wka_port->status == ZFCP_WKA_PORT_ONLINE ||
- wka_port->status == ZFCP_WKA_PORT_OFFLINE,
- HZ >> 1);
+ wait_event(wka_port->completion_wq,
+ wka_port->status == ZFCP_WKA_PORT_ONLINE ||
+ wka_port->status == ZFCP_WKA_PORT_OFFLINE);
if (wka_port->status == ZFCP_WKA_PORT_ONLINE) {
atomic_inc(&wka_port->refcount);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index c57658f..47795fb 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -670,8 +670,11 @@
zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
- if (!ret)
+ if (!ret) {
atomic_inc(&adapter->qdio_outb_full);
+ /* assume hanging outbound queue, try queue recovery */
+ zfcp_erp_adapter_reopen(adapter, 0, "fsrsg_1", NULL);
+ }
spin_lock_bh(&adapter->req_q_lock);
return -EIO;
@@ -722,7 +725,7 @@
req = zfcp_fsf_alloc_qtcb(pool);
if (unlikely(!req))
- return ERR_PTR(-EIO);
+ return ERR_PTR(-ENOMEM);
if (adapter->req_no == 0)
adapter->req_no++;
@@ -1010,6 +1013,23 @@
send_ct->handler(send_ct->handler_data);
}
+static void zfcp_fsf_setup_ct_els_unchained(struct qdio_buffer_element *sbale,
+ struct scatterlist *sg_req,
+ struct scatterlist *sg_resp)
+{
+ sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
+ sbale[2].addr = sg_virt(sg_req);
+ sbale[2].length = sg_req->length;
+ sbale[3].addr = sg_virt(sg_resp);
+ sbale[3].length = sg_resp->length;
+ sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+}
+
+static int zfcp_fsf_one_sbal(struct scatterlist *sg)
+{
+ return sg_is_last(sg) && sg->length <= PAGE_SIZE;
+}
+
static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req,
struct scatterlist *sg_req,
struct scatterlist *sg_resp,
@@ -1020,30 +1040,30 @@
int bytes;
if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) {
- if (sg_req->length > PAGE_SIZE || sg_resp->length > PAGE_SIZE ||
- !sg_is_last(sg_req) || !sg_is_last(sg_resp))
+ if (!zfcp_fsf_one_sbal(sg_req) || !zfcp_fsf_one_sbal(sg_resp))
return -EOPNOTSUPP;
- sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ;
- sbale[2].addr = sg_virt(sg_req);
- sbale[2].length = sg_req->length;
- sbale[3].addr = sg_virt(sg_resp);
- sbale[3].length = sg_resp->length;
- sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY;
+ zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
+ return 0;
+ }
+
+ /* use single, unchained SBAL if it can hold the request */
+ if (zfcp_fsf_one_sbal(sg_req) && zfcp_fsf_one_sbal(sg_resp)) {
+ zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp);
return 0;
}
bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
sg_req, max_sbals);
if (bytes <= 0)
- return -ENOMEM;
+ return -EIO;
req->qtcb->bottom.support.req_buf_length = bytes;
req->sbale_curr = ZFCP_LAST_SBALE_PER_SBAL;
bytes = zfcp_qdio_sbals_from_sg(req, SBAL_FLAGS0_TYPE_WRITE_READ,
sg_resp, max_sbals);
if (bytes <= 0)
- return -ENOMEM;
+ return -EIO;
req->qtcb->bottom.support.resp_buf_length = bytes;
return 0;
@@ -1607,10 +1627,10 @@
case FSF_ACCESS_DENIED:
wka_port->status = ZFCP_WKA_PORT_OFFLINE;
break;
- case FSF_PORT_ALREADY_OPEN:
- break;
case FSF_GOOD:
wka_port->handle = header->port_handle;
+ /* fall through */
+ case FSF_PORT_ALREADY_OPEN:
wka_port->status = ZFCP_WKA_PORT_ONLINE;
}
out:
@@ -1731,15 +1751,16 @@
zfcp_fsf_access_denied_port(req, port);
break;
case FSF_PORT_BOXED:
- zfcp_erp_port_boxed(port, "fscpph2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
/* can't use generic zfcp_erp_modify_port_status because
* ZFCP_STATUS_COMMON_OPEN must not be reset for the port */
atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
list_for_each_entry(unit, &port->unit_list_head, list)
atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN,
&unit->status);
+ zfcp_erp_port_boxed(port, "fscpph2", req);
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR |
+ ZFCP_STATUS_FSFREQ_RETRY;
+
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]) {
@@ -2541,7 +2562,6 @@
bytes = zfcp_qdio_sbals_from_sg(req, direction, fsf_cfdc->sg,
FSF_MAX_SBALS_PER_REQ);
if (bytes != ZFCP_CFDC_MAX_SIZE) {
- retval = -ENOMEM;
zfcp_fsf_req_free(req);
goto out;
}
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 967ede7..6925a17 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -167,20 +167,21 @@
struct zfcp_unit *unit = scpnt->device->hostdata;
struct zfcp_fsf_req *old_req, *abrt_req;
unsigned long flags;
- unsigned long old_req_id = (unsigned long) scpnt->host_scribble;
+ unsigned long old_reqid = (unsigned long) scpnt->host_scribble;
int retval = SUCCESS;
int retry = 3;
+ char *dbf_tag;
/* avoid race condition between late normal completion and abort */
write_lock_irqsave(&adapter->abort_lock, flags);
spin_lock(&adapter->req_list_lock);
- old_req = zfcp_reqlist_find(adapter, old_req_id);
+ old_req = zfcp_reqlist_find(adapter, old_reqid);
spin_unlock(&adapter->req_list_lock);
if (!old_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
- old_req_id);
+ old_reqid);
return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
@@ -189,7 +190,7 @@
write_unlock_irqrestore(&adapter->abort_lock, flags);
while (retry--) {
- abrt_req = zfcp_fsf_abort_fcp_command(old_req_id, unit);
+ abrt_req = zfcp_fsf_abort_fcp_command(old_reqid, unit);
if (abrt_req)
break;
@@ -197,7 +198,7 @@
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL,
- old_req_id);
+ old_reqid);
return SUCCESS;
}
}
@@ -208,13 +209,14 @@
abrt_req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
- zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "okay";
else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
- zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "lte2";
else {
- zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, abrt_req, 0);
+ dbf_tag = "fail";
retval = FAILED;
}
+ zfcp_scsi_dbf_event_abort(dbf_tag, adapter, scpnt, abrt_req, old_reqid);
zfcp_fsf_req_free(abrt_req);
return retval;
}
@@ -534,6 +536,9 @@
struct fc_rport_identifiers ids;
struct fc_rport *rport;
+ if (port->rport)
+ return;
+
ids.node_name = port->wwnn;
ids.port_name = port->wwpn;
ids.port_id = port->d_id;
@@ -557,8 +562,10 @@
{
struct fc_rport *rport = port->rport;
- if (rport)
+ if (rport) {
fc_remote_port_delete(rport);
+ port->rport = NULL;
+ }
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 3e51e64..0fe5cce 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -494,9 +494,14 @@
struct Scsi_Host *scsi_host = class_to_shost(dev);
struct zfcp_adapter *adapter =
(struct zfcp_adapter *) scsi_host->hostdata[0];
+ u64 util;
+
+ spin_lock_bh(&adapter->qdio_stat_lock);
+ util = adapter->req_q_util;
+ spin_unlock_bh(&adapter->qdio_stat_lock);
return sprintf(buf, "%d %llu\n", atomic_read(&adapter->qdio_outb_full),
- (unsigned long long)adapter->req_q_util);
+ (unsigned long long)util);
}
static DEVICE_ATTR(queue_full, S_IRUGO, zfcp_sysfs_adapter_q_full_show, NULL);
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 0471f88..4240b05 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2826,8 +2826,7 @@
*/
local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
/* Maybe it is sufficient just to release the ST-DMA lock... (if
* possible at all) At least, we should check if the lock could be
diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild
index 25a2032..70d060b 100644
--- a/drivers/scsi/cxgb3i/Kbuild
+++ b/drivers/scsi/cxgb3i/Kbuild
@@ -1,4 +1,4 @@
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3
+EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o cxgb3i_ddp.o
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 74369a3..c399f48 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
#include <linux/inet.h>
#include <linux/crypto.h>
+#include <linux/if_vlan.h>
#include <net/dst.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
@@ -184,6 +185,9 @@
struct cxgb3i_adapter *snic;
int i;
+ if (ndev->priv_flags & IFF_802_1Q_VLAN)
+ ndev = vlan_dev_real_dev(ndev);
+
read_lock(&cxgb3i_snic_rwlock);
list_for_each_entry(snic, &cxgb3i_snic_list, list_head) {
for (i = 0; i < snic->hba_cnt; i++) {
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index a840728..2c266c0 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -473,16 +473,16 @@
* limitation for the device. Try 40-bit first, and
* fail to 32-bit.
*/
- err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
if (err) {
- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"No usable DMA configuration "
"aborting\n");
goto err_out_release_regions;
}
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"Unable to obtain 32-bit DMA "
@@ -490,7 +490,7 @@
goto err_out_release_regions;
}
} else {
- err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"Unable to obtain 40-bit DMA "
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index eabf365..bfc9969 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -245,7 +245,7 @@
struct vnic_wq_copy *wq,
struct fnic_io_req *io_req,
struct scsi_cmnd *sc,
- u32 sg_count)
+ int sg_count)
{
struct scatterlist *sg;
struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
@@ -260,9 +260,6 @@
char msg[2];
if (sg_count) {
- BUG_ON(sg_count < 0);
- BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
-
/* For each SGE, create a device desc entry */
desc = io_req->sgl_list;
for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
@@ -344,7 +341,7 @@
struct fnic *fnic;
struct vnic_wq_copy *wq;
int ret;
- u32 sg_count;
+ int sg_count;
unsigned long flags;
unsigned long ptr;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 869a11b..9928704 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1095,9 +1095,14 @@
MAX_INDIRECT_BUFS);
hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
}
+
+ if (hostdata->madapter_info.os_type == 3) {
+ enable_fast_fail(hostdata);
+ return;
+ }
}
- enable_fast_fail(hostdata);
+ send_srp_login(hostdata);
}
/**
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 2bc22be..145ab9b 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -415,9 +415,9 @@
e_stat = ep->esb_stat;
if (e_stat & ESB_ST_COMPLETE) {
ep->esb_stat = e_stat & ~ESB_ST_REC_QUAL;
+ spin_unlock_bh(&ep->ex_lock);
if (e_stat & ESB_ST_REC_QUAL)
fc_exch_rrq(ep);
- spin_unlock_bh(&ep->ex_lock);
goto done;
} else {
resp = ep->resp;
@@ -1624,14 +1624,14 @@
struct fc_lport *lp;
struct fc_els_rrq *rrq;
struct fc_frame *fp;
- struct fc_seq *rrq_sp;
u32 did;
lp = ep->lp;
fp = fc_frame_alloc(lp, sizeof(*rrq));
if (!fp)
- return;
+ goto retry;
+
rrq = fc_frame_payload_get(fp, sizeof(*rrq));
memset(rrq, 0, sizeof(*rrq));
rrq->rrq_cmd = ELS_RRQ;
@@ -1647,13 +1647,20 @@
fc_host_port_id(lp->host), FC_TYPE_ELS,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- rrq_sp = fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep,
- lp->e_d_tov);
- if (!rrq_sp) {
- ep->esb_stat |= ESB_ST_REC_QUAL;
- fc_exch_timer_set_locked(ep, ep->r_a_tov);
+ if (fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, lp->e_d_tov))
+ return;
+
+retry:
+ spin_lock_bh(&ep->ex_lock);
+ if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE)) {
+ spin_unlock_bh(&ep->ex_lock);
+ /* drop hold for rec qual */
+ fc_exch_release(ep);
return;
}
+ ep->esb_stat |= ESB_ST_REC_QUAL;
+ fc_exch_timer_set_locked(ep, ep->r_a_tov);
+ spin_unlock_bh(&ep->ex_lock);
}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 716cc34..a751f62 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1974,10 +1974,10 @@
* good and have never sent us a successful tmf response
* then sent more data for the cmd.
*/
- spin_lock(&session->lock);
+ spin_lock_bh(&session->lock);
fail_scsi_task(task, DID_ABORT);
conn->tmf_state = TMF_INITIAL;
- spin_unlock(&session->lock);
+ spin_unlock_bh(&session->lock);
iscsi_start_tx(conn);
goto success_unlocked;
case TMF_TIMEDOUT:
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 54fa1e4..b338195 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -766,6 +766,7 @@
if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
SAS_ADDR_SIZE) && ephy->port) {
sas_port_add_phy(ephy->port, phy->phy);
+ phy->port = ephy->port;
phy->phy_state = PHY_DEVICE_DISCOVERED;
return 0;
}
@@ -945,11 +946,21 @@
if (ex->ex_phy[i].phy_state == PHY_VACANT ||
ex->ex_phy[i].phy_state == PHY_NOT_PRESENT)
continue;
-
+ /*
+ * Due to races, the phy might not get added to the
+ * wide port, so we add the phy to the wide port here.
+ */
if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) ==
- SAS_ADDR(child->sas_addr))
+ SAS_ADDR(child->sas_addr)) {
ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED;
+ res = sas_ex_join_wide_port(dev, i);
+ if (!res)
+ SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+ i, SAS_ADDR(ex->ex_phy[i].attached_sas_addr));
+
+ }
}
+ res = 0;
}
return res;
@@ -1598,7 +1609,7 @@
}
static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
- int from_phy)
+ int from_phy, bool update)
{
struct expander_device *ex = &dev->ex_dev;
int res = 0;
@@ -1611,7 +1622,9 @@
if (res)
goto out;
else if (phy_change_count != ex->ex_phy[i].phy_change_count) {
- ex->ex_phy[i].phy_change_count = phy_change_count;
+ if (update)
+ ex->ex_phy[i].phy_change_count =
+ phy_change_count;
*phy_id = i;
return 0;
}
@@ -1653,31 +1666,52 @@
kfree(rg_req);
return res;
}
+/**
+ * sas_find_bcast_dev - find the device issue BROADCAST(CHANGE).
+ * @dev:domain device to be detect.
+ * @src_dev: the device which originated BROADCAST(CHANGE).
+ *
+ * Add self-configuration expander suport. Suppose two expander cascading,
+ * when the first level expander is self-configuring, hotplug the disks in
+ * second level expander, BROADCAST(CHANGE) will not only be originated
+ * in the second level expander, but also be originated in the first level
+ * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
+ * expander changed count in two level expanders will all increment at least
+ * once, but the phy which chang count has changed is the source device which
+ * we concerned.
+ */
static int sas_find_bcast_dev(struct domain_device *dev,
struct domain_device **src_dev)
{
struct expander_device *ex = &dev->ex_dev;
int ex_change_count = -1;
+ int phy_id = -1;
int res;
+ struct domain_device *ch;
res = sas_get_ex_change_count(dev, &ex_change_count);
if (res)
goto out;
- if (ex_change_count != -1 &&
- ex_change_count != ex->ex_change_count) {
- *src_dev = dev;
- ex->ex_change_count = ex_change_count;
- } else {
- struct domain_device *ch;
-
- list_for_each_entry(ch, &ex->children, siblings) {
- if (ch->dev_type == EDGE_DEV ||
- ch->dev_type == FANOUT_DEV) {
- res = sas_find_bcast_dev(ch, src_dev);
- if (src_dev)
- return res;
- }
+ if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
+ /* Just detect if this expander phys phy change count changed,
+ * in order to determine if this expander originate BROADCAST,
+ * and do not update phy change count field in our structure.
+ */
+ res = sas_find_bcast_phy(dev, &phy_id, 0, false);
+ if (phy_id != -1) {
+ *src_dev = dev;
+ ex->ex_change_count = ex_change_count;
+ SAS_DPRINTK("Expander phy change count has changed\n");
+ return res;
+ } else
+ SAS_DPRINTK("Expander phys DID NOT change\n");
+ }
+ list_for_each_entry(ch, &ex->children, siblings) {
+ if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+ res = sas_find_bcast_dev(ch, src_dev);
+ if (src_dev)
+ return res;
}
}
out:
@@ -1700,24 +1734,26 @@
}
static void sas_unregister_devs_sas_addr(struct domain_device *parent,
- int phy_id)
+ int phy_id, bool last)
{
struct expander_device *ex_dev = &parent->ex_dev;
struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
struct domain_device *child, *n;
-
- list_for_each_entry_safe(child, n, &ex_dev->children, siblings) {
- if (SAS_ADDR(child->sas_addr) ==
- SAS_ADDR(phy->attached_sas_addr)) {
- if (child->dev_type == EDGE_DEV ||
- child->dev_type == FANOUT_DEV)
- sas_unregister_ex_tree(child);
- else
- sas_unregister_dev(child);
- break;
+ if (last) {
+ list_for_each_entry_safe(child, n,
+ &ex_dev->children, siblings) {
+ if (SAS_ADDR(child->sas_addr) ==
+ SAS_ADDR(phy->attached_sas_addr)) {
+ if (child->dev_type == EDGE_DEV ||
+ child->dev_type == FANOUT_DEV)
+ sas_unregister_ex_tree(child);
+ else
+ sas_unregister_dev(child);
+ break;
+ }
}
+ sas_disable_routing(parent, phy->attached_sas_addr);
}
- sas_disable_routing(parent, phy->attached_sas_addr);
memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
sas_port_delete_phy(phy->port, phy->phy);
if (phy->port->num_phys == 0)
@@ -1770,15 +1806,31 @@
{
struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
struct domain_device *child;
- int res;
+ bool found = false;
+ int res, i;
SAS_DPRINTK("ex %016llx phy%d new device attached\n",
SAS_ADDR(dev->sas_addr), phy_id);
res = sas_ex_phy_discover(dev, phy_id);
if (res)
goto out;
+ /* to support the wide port inserted */
+ for (i = 0; i < dev->ex_dev.num_phys; i++) {
+ struct ex_phy *ex_phy_temp = &dev->ex_dev.ex_phy[i];
+ if (i == phy_id)
+ continue;
+ if (SAS_ADDR(ex_phy_temp->attached_sas_addr) ==
+ SAS_ADDR(ex_phy->attached_sas_addr)) {
+ found = true;
+ break;
+ }
+ }
+ if (found) {
+ sas_ex_join_wide_port(dev, phy_id);
+ return 0;
+ }
res = sas_ex_discover_devices(dev, phy_id);
- if (res)
+ if (!res)
goto out;
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
if (SAS_ADDR(child->sas_addr) ==
@@ -1793,7 +1845,7 @@
return res;
}
-static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
+static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
@@ -1804,11 +1856,11 @@
switch (res) {
case SMP_RESP_NO_PHY:
phy->phy_state = PHY_NOT_PRESENT;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
goto out; break;
case SMP_RESP_PHY_VACANT:
phy->phy_state = PHY_VACANT;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
goto out; break;
case SMP_RESP_FUNC_ACC:
break;
@@ -1816,7 +1868,7 @@
if (SAS_ADDR(attached_sas_addr) == 0) {
phy->phy_state = PHY_EMPTY;
- sas_unregister_devs_sas_addr(dev, phy_id);
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
} else if (SAS_ADDR(attached_sas_addr) ==
SAS_ADDR(phy->attached_sas_addr)) {
SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
@@ -1828,12 +1880,27 @@
return res;
}
+/**
+ * sas_rediscover - revalidate the domain.
+ * @dev:domain device to be detect.
+ * @phy_id: the phy id will be detected.
+ *
+ * NOTE: this process _must_ quit (return) as soon as any connection
+ * errors are encountered. Connection recovery is done elsewhere.
+ * Discover process only interrogates devices in order to discover the
+ * domain.For plugging out, we un-register the device only when it is
+ * the last phy in the port, for other phys in this port, we just delete it
+ * from the port.For inserting, we do discovery when it is the
+ * first phy,for other phys in this port, we add it to the port to
+ * forming the wide-port.
+ */
static int sas_rediscover(struct domain_device *dev, const int phy_id)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
int res = 0;
int i;
+ bool last = true; /* is this the last phy of the port */
SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n",
SAS_ADDR(dev->sas_addr), phy_id);
@@ -1848,13 +1915,13 @@
SAS_ADDR(changed_phy->attached_sas_addr)) {
SAS_DPRINTK("phy%d part of wide port with "
"phy%d\n", phy_id, i);
- goto out;
+ last = false;
+ break;
}
}
- res = sas_rediscover_dev(dev, phy_id);
+ res = sas_rediscover_dev(dev, phy_id, last);
} else
res = sas_discover_new(dev, phy_id);
-out:
return res;
}
@@ -1881,7 +1948,7 @@
do {
phy_id = -1;
- res = sas_find_bcast_phy(dev, &phy_id, i);
+ res = sas_find_bcast_phy(dev, &phy_id, i, true);
if (phy_id == -1)
break;
res = sas_rediscover(dev, phy_id);
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index e6ac59c..fe8b74c 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -56,7 +56,7 @@
}
}
- /* find a port */
+ /* see if the phy should be part of a wide port */
spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
for (i = 0; i < sas_ha->num_phys; i++) {
port = sas_ha->sas_port[i];
@@ -69,12 +69,23 @@
SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
port->id);
break;
- } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) {
- memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE);
- break;
}
spin_unlock(&port->phy_list_lock);
}
+ /* The phy does not match any existing port, create a new one */
+ if (i == sas_ha->num_phys) {
+ for (i = 0; i < sas_ha->num_phys; i++) {
+ port = sas_ha->sas_port[i];
+ spin_lock(&port->phy_list_lock);
+ if (*(u64 *)port->sas_addr == 0
+ && port->num_phys == 0) {
+ memcpy(port->sas_addr, phy->sas_addr,
+ SAS_ADDR_SIZE);
+ break;
+ }
+ spin_unlock(&port->phy_list_lock);
+ }
+ }
if (i >= sas_ha->num_phys) {
printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index b12ad7c7..18735b3 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -75,8 +75,9 @@
int i;
printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
for (i = 0; i < cmd->cmd_len; ++i)
- printk(" %.2x", cmd->cmnd[i]);
- printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
+ printk(KERN_CONT " %.2x", cmd->cmnd[i]);
+ printk(KERN_CONT "\n");
+ printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
}
#endif
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 650bcef..cd78c50 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -9,7 +9,6 @@
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <linux/smp_lock.h>
#include <linux/list.h>
#include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.c b/drivers/scsi/qla4xxx/ql4_dbg.c
index fcc184c..cbceb0e 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.c
+++ b/drivers/scsi/qla4xxx/ql4_dbg.c
@@ -15,19 +15,18 @@
uint32_t cnt;
uint8_t *c = b;
- printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
+ printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
"Fh\n");
printk("------------------------------------------------------------"
"--\n");
- for (cnt = 0; cnt < size; cnt++, c++) {
- printk(KERN_DEBUG "%02x", *c);
- if (!(cnt % 16))
- printk(KERN_DEBUG "\n");
+ for (cnt = 0; cnt < size; c++) {
+ printk(KERN_INFO "%02x", *c);
+ if (!(++cnt % 16))
+ printk(KERN_INFO "\n");
else
- printk(KERN_DEBUG " ");
+ printk(KERN_INFO " ");
}
- if (cnt % 16)
- printk(KERN_DEBUG "\n");
+ printk(KERN_INFO "\n");
}
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index b586f27..81b5f29 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -100,7 +100,6 @@
#define MAX_SRBS MAX_CMDS_TO_RISC
#define MBOX_AEN_REG_COUNT 5
#define MAX_INIT_RETRIES 5
-#define IOCB_HIWAT_CUSHION 16
/*
* Buffer sizes
@@ -184,6 +183,11 @@
uint16_t cc_stat;
u_long r_start; /* Time we recieve a cmd from OS */
u_long u_start; /* Time when we handed the cmd to F/W */
+
+ /* Used for extended sense / status continuation */
+ uint8_t *req_sense_ptr;
+ uint16_t req_sense_len;
+ uint16_t reserved2;
};
/*
@@ -302,7 +306,6 @@
uint32_t tot_ddbs;
uint16_t iocb_cnt;
- uint16_t iocb_hiwat;
/* SRB cache. */
#define SRB_MIN_REQ 128
@@ -436,6 +439,8 @@
/* Map ddb_list entry by FW ddb index */
struct ddb_entry *fw_ddb_index_map[MAX_DDB_ENTRIES];
+ /* Saved srb for status continuation entry processing */
+ struct srb *status_srb;
};
static inline int is_qla4010(struct scsi_qla_host *ha)
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 1b667a7..9cd7a60 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -572,6 +572,7 @@
*************************************************************************/
#define IOCB_MAX_CDB_LEN 16 /* Bytes in a CBD */
#define IOCB_MAX_SENSEDATA_LEN 32 /* Bytes of sense data */
+#define IOCB_MAX_EXT_SENSEDATA_LEN 60 /* Bytes of extended sense data */
/* IOCB header structure */
struct qla4_header {
@@ -733,6 +734,12 @@
};
+/* Status Continuation entry */
+struct status_cont_entry {
+ struct qla4_header hdr; /* 00-03 */
+ uint8_t ext_sense_data[IOCB_MAX_EXT_SENSEDATA_LEN]; /* 04-63 */
+};
+
struct passthru0 {
struct qla4_header hdr; /* 00-03 */
uint32_t handle; /* 04-07 */
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 912a674..e0c3215 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -10,9 +10,42 @@
#include "ql4_dbg.h"
#include "ql4_inline.h"
-
#include <scsi/scsi_tcq.h>
+static int
+qla4xxx_space_in_req_ring(struct scsi_qla_host *ha, uint16_t req_cnt)
+{
+ uint16_t cnt;
+
+ /* Calculate number of free request entries. */
+ if ((req_cnt + 2) >= ha->req_q_count) {
+ cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
+ if (ha->request_in < cnt)
+ ha->req_q_count = cnt - ha->request_in;
+ else
+ ha->req_q_count = REQUEST_QUEUE_DEPTH -
+ (ha->request_in - cnt);
+ }
+
+ /* Check if room for request in request ring. */
+ if ((req_cnt + 2) < ha->req_q_count)
+ return 1;
+ else
+ return 0;
+}
+
+static void qla4xxx_advance_req_ring_ptr(struct scsi_qla_host *ha)
+{
+ /* Advance request queue pointer */
+ if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
+ ha->request_in = 0;
+ ha->request_ptr = ha->request_ring;
+ } else {
+ ha->request_in++;
+ ha->request_ptr++;
+ }
+}
+
/**
* qla4xxx_get_req_pkt - returns a valid entry in request queue.
* @ha: Pointer to host adapter structure.
@@ -26,35 +59,18 @@
static int qla4xxx_get_req_pkt(struct scsi_qla_host *ha,
struct queue_entry **queue_entry)
{
- uint16_t request_in;
- uint8_t status = QLA_SUCCESS;
+ uint16_t req_cnt = 1;
- *queue_entry = ha->request_ptr;
-
- /* get the latest request_in and request_out index */
- request_in = ha->request_in;
- ha->request_out = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
-
- /* Advance request queue pointer and check for queue full */
- if (request_in == (REQUEST_QUEUE_DEPTH - 1)) {
- request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else {
- request_in++;
- ha->request_ptr++;
- }
-
- /* request queue is full, try again later */
- if ((ha->iocb_cnt + 1) >= ha->iocb_hiwat) {
- /* restore request pointer */
- ha->request_ptr = *queue_entry;
- status = QLA_ERROR;
- } else {
- ha->request_in = request_in;
+ if (qla4xxx_space_in_req_ring(ha, req_cnt)) {
+ *queue_entry = ha->request_ptr;
memset(*queue_entry, 0, sizeof(**queue_entry));
+
+ qla4xxx_advance_req_ring_ptr(ha);
+ ha->req_q_count -= req_cnt;
+ return QLA_SUCCESS;
}
- return status;
+ return QLA_ERROR;
}
/**
@@ -100,21 +116,14 @@
return status;
}
-static struct continuation_t1_entry* qla4xxx_alloc_cont_entry(
- struct scsi_qla_host *ha)
+static struct continuation_t1_entry *
+qla4xxx_alloc_cont_entry(struct scsi_qla_host *ha)
{
struct continuation_t1_entry *cont_entry;
cont_entry = (struct continuation_t1_entry *)ha->request_ptr;
- /* Advance request queue pointer */
- if (ha->request_in == (REQUEST_QUEUE_DEPTH - 1)) {
- ha->request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else {
- ha->request_in++;
- ha->request_ptr++;
- }
+ qla4xxx_advance_req_ring_ptr(ha);
/* Load packet defaults */
cont_entry->hdr.entryType = ET_CONTINUE;
@@ -197,13 +206,10 @@
struct scsi_cmnd *cmd = srb->cmd;
struct ddb_entry *ddb_entry;
struct command_t3_entry *cmd_entry;
-
int nseg;
uint16_t tot_dsds;
uint16_t req_cnt;
-
unsigned long flags;
- uint16_t cnt;
uint32_t index;
char tag[2];
@@ -217,6 +223,19 @@
index = (uint32_t)cmd->request->tag;
+ /*
+ * Check to see if adapter is online before placing request on
+ * request queue. If a reset occurs and a request is in the queue,
+ * the firmware will still attempt to process the request, retrieving
+ * garbage for pointers.
+ */
+ if (!test_bit(AF_ONLINE, &ha->flags)) {
+ DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
+ "Do not issue command.\n",
+ ha->host_no, __func__));
+ goto queuing_error;
+ }
+
/* Calculate the number of request entries needed. */
nseg = scsi_dma_map(cmd);
if (nseg < 0)
@@ -224,17 +243,7 @@
tot_dsds = nseg;
req_cnt = qla4xxx_calc_request_entries(tot_dsds);
-
- if (ha->req_q_count < (req_cnt + 2)) {
- cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
- if (ha->request_in < cnt)
- ha->req_q_count = cnt - ha->request_in;
- else
- ha->req_q_count = REQUEST_QUEUE_DEPTH -
- (ha->request_in - cnt);
- }
-
- if (ha->req_q_count < (req_cnt + 2))
+ if (!qla4xxx_space_in_req_ring(ha, req_cnt))
goto queuing_error;
/* total iocbs active */
@@ -286,32 +295,10 @@
break;
}
-
- /* Advance request queue pointer */
- ha->request_in++;
- if (ha->request_in == REQUEST_QUEUE_DEPTH) {
- ha->request_in = 0;
- ha->request_ptr = ha->request_ring;
- } else
- ha->request_ptr++;
-
-
+ qla4xxx_advance_req_ring_ptr(ha);
qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds);
wmb();
- /*
- * Check to see if adapter is online before placing request on
- * request queue. If a reset occurs and a request is in the queue,
- * the firmware will still attempt to process the request, retrieving
- * garbage for pointers.
- */
- if (!test_bit(AF_ONLINE, &ha->flags)) {
- DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
- "Do not issue command.\n",
- ha->host_no, __func__));
- goto queuing_error;
- }
-
srb->cmd->host_scribble = (unsigned char *)srb;
/* update counters */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 799120f..8025ee1 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -11,6 +11,98 @@
#include "ql4_inline.h"
/**
+ * qla4xxx_copy_sense - copy sense data into cmd sense buffer
+ * @ha: Pointer to host adapter structure.
+ * @sts_entry: Pointer to status entry structure.
+ * @srb: Pointer to srb structure.
+ **/
+static void qla4xxx_copy_sense(struct scsi_qla_host *ha,
+ struct status_entry *sts_entry,
+ struct srb *srb)
+{
+ struct scsi_cmnd *cmd = srb->cmd;
+ uint16_t sense_len;
+
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ sense_len = le16_to_cpu(sts_entry->senseDataByteCnt);
+ if (sense_len == 0)
+ return;
+
+ /* Save total available sense length,
+ * not to exceed cmd's sense buffer size */
+ sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE);
+ srb->req_sense_ptr = cmd->sense_buffer;
+ srb->req_sense_len = sense_len;
+
+ /* Copy sense from sts_entry pkt */
+ sense_len = min_t(uint16_t, sense_len, IOCB_MAX_SENSEDATA_LEN);
+ memcpy(cmd->sense_buffer, sts_entry->senseData, sense_len);
+
+ DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: %s: sense key = %x, "
+ "ASL= %02x, ASC/ASCQ = %02x/%02x\n", ha->host_no,
+ cmd->device->channel, cmd->device->id,
+ cmd->device->lun, __func__,
+ sts_entry->senseData[2] & 0x0f,
+ sts_entry->senseData[7],
+ sts_entry->senseData[12],
+ sts_entry->senseData[13]));
+
+ DEBUG5(qla4xxx_dump_buffer(cmd->sense_buffer, sense_len));
+ srb->flags |= SRB_GOT_SENSE;
+
+ /* Update srb, in case a sts_cont pkt follows */
+ srb->req_sense_ptr += sense_len;
+ srb->req_sense_len -= sense_len;
+ if (srb->req_sense_len != 0)
+ ha->status_srb = srb;
+ else
+ ha->status_srb = NULL;
+}
+
+/**
+ * qla4xxx_status_cont_entry - Process a Status Continuations entry.
+ * @ha: SCSI driver HA context
+ * @sts_cont: Entry pointer
+ *
+ * Extended sense data.
+ */
+static void
+qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
+ struct status_cont_entry *sts_cont)
+{
+ struct srb *srb = ha->status_srb;
+ struct scsi_cmnd *cmd;
+ uint8_t sense_len;
+
+ if (srb == NULL)
+ return;
+
+ cmd = srb->cmd;
+ if (cmd == NULL) {
+ DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
+ "back to OS srb=%p srb->state:%d\n", ha->host_no,
+ __func__, srb, srb->state));
+ ha->status_srb = NULL;
+ return;
+ }
+
+ /* Copy sense data. */
+ sense_len = min_t(uint16_t, srb->req_sense_len,
+ IOCB_MAX_EXT_SENSEDATA_LEN);
+ memcpy(srb->req_sense_ptr, sts_cont->ext_sense_data, sense_len);
+ DEBUG5(qla4xxx_dump_buffer(srb->req_sense_ptr, sense_len));
+
+ srb->req_sense_ptr += sense_len;
+ srb->req_sense_len -= sense_len;
+
+ /* Place command on done queue. */
+ if (srb->req_sense_len == 0) {
+ qla4xxx_srb_compl(ha, srb);
+ ha->status_srb = NULL;
+ }
+}
+
+/**
* qla4xxx_status_entry - processes status IOCBs
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
@@ -23,7 +115,6 @@
struct srb *srb;
struct ddb_entry *ddb_entry;
uint32_t residual;
- uint16_t sensebytecnt;
srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
if (!srb) {
@@ -92,24 +183,7 @@
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
- sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt);
- if (sensebytecnt == 0)
- break;
-
- memcpy(cmd->sense_buffer, sts_entry->senseData,
- min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
- "ASC/ASCQ = %02x/%02x\n", ha->host_no,
- cmd->device->channel, cmd->device->id,
- cmd->device->lun, __func__,
- sts_entry->senseData[2] & 0x0f,
- sts_entry->senseData[12],
- sts_entry->senseData[13]));
-
- srb->flags |= SRB_GOT_SENSE;
+ qla4xxx_copy_sense(ha, sts_entry, srb);
break;
case SCS_INCOMPLETE:
@@ -176,23 +250,7 @@
break;
/* Copy Sense Data into sense buffer. */
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-
- sensebytecnt =
- le16_to_cpu(sts_entry->senseDataByteCnt);
- if (sensebytecnt == 0)
- break;
-
- memcpy(cmd->sense_buffer, sts_entry->senseData,
- min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE));
-
- DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, "
- "ASC/ASCQ = %02x/%02x\n", ha->host_no,
- cmd->device->channel, cmd->device->id,
- cmd->device->lun, __func__,
- sts_entry->senseData[2] & 0x0f,
- sts_entry->senseData[12],
- sts_entry->senseData[13]));
+ qla4xxx_copy_sense(ha, sts_entry, srb);
} else {
/*
* If RISC reports underrun and target does not
@@ -268,9 +326,10 @@
status_entry_exit:
- /* complete the request */
+ /* complete the request, if not waiting for status_continuation pkt */
srb->cc_stat = sts_entry->completionStatus;
- qla4xxx_srb_compl(ha, srb);
+ if (ha->status_srb == NULL)
+ qla4xxx_srb_compl(ha, srb);
}
/**
@@ -305,10 +364,7 @@
/* process entry */
switch (sts_entry->hdr.entryType) {
case ET_STATUS:
- /*
- * Common status - Single completion posted in single
- * IOSB.
- */
+ /* Common status */
qla4xxx_status_entry(ha, sts_entry);
break;
@@ -316,9 +372,8 @@
break;
case ET_STATUS_CONTINUATION:
- /* Just throw away the status continuation entries */
- DEBUG2(printk("scsi%ld: %s: Status Continuation entry "
- "- ignoring\n", ha->host_no, __func__));
+ qla4xxx_status_cont_entry(ha,
+ (struct status_cont_entry *) sts_entry);
break;
case ET_COMMAND:
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 051b0f5..09d6d4b 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -385,16 +385,6 @@
mbox_sts[0]));
return QLA_ERROR;
}
-
- /* High-water mark of IOCBs */
- ha->iocb_hiwat = mbox_sts[2];
- if (ha->iocb_hiwat > IOCB_HIWAT_CUSHION)
- ha->iocb_hiwat -= IOCB_HIWAT_CUSHION;
- else
- dev_info(&ha->pdev->dev, "WARNING!!! You have less than %d "
- "firmware IOCBs available (%d).\n",
- IOCB_HIWAT_CUSHION, ha->iocb_hiwat);
-
return QLA_SUCCESS;
}
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index ec9da6c..40e3caf 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -66,6 +66,7 @@
static int qla4xxx_host_get_param(struct Scsi_Host *shost,
enum iscsi_host_param param, char *buf);
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
/*
* SCSI host template entry points
@@ -89,6 +90,7 @@
.eh_device_reset_handler = qla4xxx_eh_device_reset,
.eh_target_reset_handler = qla4xxx_eh_target_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
+ .eh_timed_out = qla4xxx_eh_cmd_timed_out,
.slave_configure = qla4xxx_slave_configure,
.slave_alloc = qla4xxx_slave_alloc,
@@ -124,6 +126,21 @@
static struct scsi_transport_template *qla4xxx_scsi_transport;
+static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc)
+{
+ struct iscsi_cls_session *session;
+ struct ddb_entry *ddb_entry;
+
+ session = starget_to_session(scsi_target(sc->device));
+ ddb_entry = session->dd_data;
+
+ /* if we are not logged in then the LLD is going to clean up the cmd */
+ if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE)
+ return BLK_EH_RESET_TIMER;
+ else
+ return BLK_EH_NOT_HANDLED;
+}
+
static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
{
struct ddb_entry *ddb_entry = session->dd_data;
@@ -904,18 +921,17 @@
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+ qla4xxx_flush_active_srbs(ha);
+
/* Reset the firmware. If successful, function
* returns with ISP interrupts enabled.
*/
- if (status == QLA_SUCCESS) {
- DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
- ha->host_no, __func__));
- qla4xxx_flush_active_srbs(ha);
- if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
- status = qla4xxx_soft_reset(ha);
- else
- status = QLA_ERROR;
- }
+ DEBUG2(printk("scsi%ld: %s - Performing soft reset..\n",
+ ha->host_no, __func__));
+ if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS)
+ status = qla4xxx_soft_reset(ha);
+ else
+ status = QLA_ERROR;
/* Flush any pending ddb changed AENs */
qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
@@ -1527,11 +1543,9 @@
{
struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
struct ddb_entry *ddb_entry = cmd->device->hostdata;
- struct srb *sp;
int ret = FAILED, stat;
- sp = (struct srb *) cmd->SCp.ptr;
- if (!sp || !ddb_entry)
+ if (!ddb_entry)
return ret;
dev_info(&ha->pdev->dev,
@@ -1644,7 +1658,7 @@
ha = (struct scsi_qla_host *) cmd->device->host->hostdata;
dev_info(&ha->pdev->dev,
- "scsi(%ld:%d:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no,
+ "scsi(%ld:%d:%d:%d): HOST RESET ISSUED.\n", ha->host_no,
cmd->device->channel, cmd->device->id, cmd->device->lun);
if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index ab984cb..6980cb2 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,5 +5,5 @@
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.01.00-k8"
+#define QLA4XXX_DRIVER_VERSION "5.01.00-k9"
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2eee9e6..292c02f 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3670,13 +3670,14 @@
fc_bsg_goose_queue(struct fc_rport *rport)
{
int flagset;
+ unsigned long flags;
if (!rport->rqst_q)
return;
get_device(&rport->dev);
- spin_lock(rport->rqst_q->queue_lock);
+ spin_lock_irqsave(rport->rqst_q->queue_lock, flags);
flagset = test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags) &&
!test_bit(QUEUE_FLAG_REENTER, &rport->rqst_q->queue_flags);
if (flagset)
@@ -3684,7 +3685,7 @@
__blk_run_queue(rport->rqst_q);
if (flagset)
queue_flag_clear(QUEUE_FLAG_REENTER, rport->rqst_q);
- spin_unlock(rport->rqst_q->queue_lock);
+ spin_unlock_irqrestore(rport->rqst_q->queue_lock, flags);
put_device(&rport->dev);
}
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 783e33c..b47240c 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -990,7 +990,7 @@
struct iscsi_uevent *ev;
int len = NLMSG_SPACE(sizeof(*ev) + data_size);
- skb = alloc_skb(len, GFP_NOIO);
+ skb = alloc_skb(len, GFP_ATOMIC);
if (!skb) {
printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
return -ENOMEM;
@@ -1012,7 +1012,7 @@
memcpy((char *)ev + sizeof(*ev), data, data_size);
- return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+ return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5616cd7..b7b9fec 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1840,6 +1840,18 @@
kfree(buffer);
}
+static int sd_try_extended_inquiry(struct scsi_device *sdp)
+{
+ /*
+ * Although VPD inquiries can go to SCSI-2 type devices,
+ * some USB ones crash on receiving them, and the pages
+ * we currently ask for are for SPC-3 and beyond
+ */
+ if (sdp->scsi_level > SCSI_SPC_2)
+ return 1;
+ return 0;
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -1877,8 +1889,12 @@
*/
if (sdkp->media_present) {
sd_read_capacity(sdkp, buffer);
- sd_read_block_limits(sdkp);
- sd_read_block_characteristics(sdkp);
+
+ if (sd_try_extended_inquiry(sdp)) {
+ sd_read_block_limits(sdkp);
+ sd_read_block_characteristics(sdkp);
+ }
+
sd_read_write_protect_flag(sdkp, buffer);
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 8201387..9230402 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -210,13 +210,11 @@
static int sg_allow_access(struct file *filp, unsigned char *cmd)
{
struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
- struct request_queue *q = sfp->parentdp->device->request_queue;
if (sfp->parentdp->device->type == TYPE_SCANNER)
return 0;
- return blk_verify_command(&q->cmd_filter,
- cmd, filp->f_mode & FMODE_WRITE);
+ return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE);
}
static int
@@ -621,7 +619,7 @@
if (strcmp(current->comm, cmd) && printk_ratelimit()) {
printk(KERN_WARNING
"sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
- "guessing data in;\n" KERN_WARNING " "
+ "guessing data in;\n "
"program %s not setting count and/or reply_len properly\n",
old_hdr.reply_len - (int)SZ_SG_HEADER,
input_size, (unsigned int) cmnd[0],
@@ -1658,6 +1656,10 @@
md->nr_entries = req_schp->k_use_sg;
md->offset = 0;
md->null_mapped = hp->dxferp ? 0 : 1;
+ if (dxfer_dir == SG_DXFER_TO_FROM_DEV)
+ md->from_user = 1;
+ else
+ md->from_user = 0;
}
if (iov_count) {
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index bcaba86..75da6e5 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2860,8 +2860,7 @@
*/
local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n"
- KERN_INFO " before abortion\n", HOSTNO);
+ printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
return SCSI_ABORT_NOT_RUNNING;
}
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 97f3158..27e84e4 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -134,7 +134,7 @@
host = ncr_attach(&zalon7xx_template, unit, &device);
if (!host)
- goto fail;
+ return -ENODEV;
if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a07015d..e7108e7 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -60,11 +60,12 @@
static void moan_device(const char *str, struct pci_dev *dev)
{
- printk(KERN_WARNING "%s: %s\n"
- KERN_WARNING "Please send the output of lspci -vv, this\n"
- KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
- KERN_WARNING "manufacturer and name of serial board or\n"
- KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+ printk(KERN_WARNING
+ "%s: %s\n"
+ "Please send the output of lspci -vv, this\n"
+ "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ "manufacturer and name of serial board or\n"
+ "modem board to rmk+serial@arm.linux.org.uk.\n",
pci_name(dev), str, dev->vendor, dev->device,
dev->subsystem_vendor, dev->subsystem_device);
}
@@ -759,6 +760,8 @@
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
+ if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+ return 0;
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return 0;
@@ -3557,6 +3560,10 @@
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 338b15c..607d43a 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1551,6 +1551,7 @@
if (ret)
goto err_add_port;
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
if (atmel_is_console_port(&port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
@@ -1559,6 +1560,7 @@
*/
clk_disable(port->clk);
}
+#endif
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 34b4ae0..c108b1a 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -236,7 +236,6 @@
int retval;
pr_debug("%s enter\n", __func__);
- memset(buffer, 20, '\0');
snprintf(buffer, 20, "%s rx", up->name);
retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
if (retval) {
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 141c0a3..a9802e7 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -132,7 +132,7 @@
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
- mem_addr = alloc_bootmem(memsz);
+ mem_addr = kzalloc(memsz, GFP_NOWAIT);
dma_addr = virt_to_bus(mem_addr);
}
else
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index 698048f..f7c24ba 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -730,7 +730,6 @@
}
static struct platform_driver msm_platform_driver = {
- .probe = msm_serial_probe,
.remove = msm_serial_remove,
.driver = {
.name = "msm_serial",
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index fb00ed5..fed1a9a 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -76,7 +76,7 @@
return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
}
-static struct platform_driver s3c2400_serial_drv = {
+static struct platform_driver s3c2400_serial_driver = {
.probe = s3c2400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -85,16 +85,16 @@
},
};
-s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
static inline int s3c2400_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+ return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
}
static inline void s3c2400_serial_exit(void)
{
- platform_driver_unregister(&s3c2400_serial_drv);
+ platform_driver_unregister(&s3c2400_serial_driver);
}
module_init(s3c2400_serial_init);
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index b5d7cbc..c99f082 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -88,7 +88,7 @@
return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
}
-static struct platform_driver s3c2410_serial_drv = {
+static struct platform_driver s3c2410_serial_driver = {
.probe = s3c2410_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -97,16 +97,16 @@
},
};
-s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
static int __init s3c2410_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+ return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
}
static void __exit s3c2410_serial_exit(void)
{
- platform_driver_unregister(&s3c2410_serial_drv);
+ platform_driver_unregister(&s3c2410_serial_driver);
}
module_init(s3c2410_serial_init);
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 11dcb90..6e057d8 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -121,7 +121,7 @@
return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
}
-static struct platform_driver s3c2412_serial_drv = {
+static struct platform_driver s3c2412_serial_driver = {
.probe = s3c2412_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -130,16 +130,16 @@
},
};
-s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
static inline int s3c2412_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
+ return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
}
static inline void s3c2412_serial_exit(void)
{
- platform_driver_unregister(&s3c2412_serial_drv);
+ platform_driver_unregister(&s3c2412_serial_driver);
}
module_init(s3c2412_serial_init);
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 06c5b0c..69ff5d3 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -151,7 +151,7 @@
return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
}
-static struct platform_driver s3c2440_serial_drv = {
+static struct platform_driver s3c2440_serial_driver = {
.probe = s3c2440_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -160,16 +160,16 @@
},
};
-s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
static int __init s3c2440_serial_init(void)
{
- return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+ return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
}
static void __exit s3c2440_serial_exit(void)
{
- platform_driver_unregister(&s3c2440_serial_drv);
+ platform_driver_unregister(&s3c2440_serial_driver);
}
module_init(s3c2440_serial_init);
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 786a067..26c49e1 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -92,7 +92,7 @@
return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
}
-static struct platform_driver s3c24a0_serial_drv = {
+static struct platform_driver s3c24a0_serial_driver = {
.probe = s3c24a0_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -101,16 +101,16 @@
},
};
-s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
static int __init s3c24a0_serial_init(void)
{
- return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+ return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
}
static void __exit s3c24a0_serial_exit(void)
{
- platform_driver_unregister(&s3c24a0_serial_drv);
+ platform_driver_unregister(&s3c24a0_serial_driver);
}
module_init(s3c24a0_serial_init);
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 48f1a37..4be92ab 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -122,7 +122,7 @@
return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
}
-static struct platform_driver s3c6400_serial_drv = {
+static struct platform_driver s3c6400_serial_driver = {
.probe = s3c6400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
@@ -131,16 +131,16 @@
},
};
-s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
static int __init s3c6400_serial_init(void)
{
- return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+ return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
}
static void __exit s3c6400_serial_exit(void)
{
- platform_driver_unregister(&s3c6400_serial_drv);
+ platform_driver_unregister(&s3c6400_serial_driver);
}
module_init(s3c6400_serial_init);
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 998e89d..e066563 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -549,7 +549,7 @@
.mapbase = KS8695_UART_VA,
.iotype = SERIAL_IO_MEM,
.irq = KS8695_IRQ_UART_TX,
- .uartclk = CLOCK_TICK_RATE * 16,
+ .uartclk = KS8695_CLOCK_RATE * 16,
.fifosize = 16,
.ops = &ks8695uart_pops,
.flags = ASYNC_BOOT_AUTOCONF,
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 66f5267..8e2feb5 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -707,24 +707,25 @@
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
- unsigned short ssr_status, scr_status;
+ unsigned short ssr_status, scr_status, err_enabled;
struct uart_port *port = ptr;
irqreturn_t ret = IRQ_NONE;
ssr_status = sci_in(port, SCxSR);
scr_status = sci_in(port, SCSCR);
+ err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
/* Tx Interrupt */
- if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+ if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
ret = sci_tx_interrupt(irq, ptr);
/* Rx Interrupt */
- if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+ if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
ret = sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
- if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
- if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+ if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
return ret;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0573f3b..dac550e 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -1,7 +1,7 @@
/*
* Driver for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2004-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* Based on drivers/serial/8250.c, by Russell King.
*
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index eee4b6e..9b80ad3 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -59,6 +59,8 @@
/* per-register bitmasks: */
+#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
@@ -90,6 +92,7 @@
#define OMAP2_MCSPI_CHCTRL_EN (1 << 0)
+#define OMAP2_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
/* We have 2 DMA channels per CS, one for RX and one for TX */
struct omap2_mcspi_dma {
@@ -269,7 +272,7 @@
if (rx != NULL) {
omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
- data_type, element_count, 1,
+ data_type, element_count - 1, 1,
OMAP_DMA_SYNC_ELEMENT,
mcspi_dma->dma_rx_sync_dev, 1);
@@ -300,6 +303,25 @@
if (rx != NULL) {
wait_for_completion(&mcspi_dma->dma_rx_completion);
dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+ omap2_mcspi_set_enable(spi, 0);
+ if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
+ & OMAP2_MCSPI_CHSTAT_RXS)) {
+ u32 w;
+
+ w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
+ if (word_len <= 8)
+ ((u8 *)xfer->rx_buf)[element_count - 1] = w;
+ else if (word_len <= 16)
+ ((u16 *)xfer->rx_buf)[element_count - 1] = w;
+ else /* word_len <= 32 */
+ ((u32 *)xfer->rx_buf)[element_count - 1] = w;
+ } else {
+ dev_err(&spi->dev, "DMA RX last word empty");
+ count -= (word_len <= 8) ? 1 :
+ (word_len <= 16) ? 2 :
+ /* word_len <= 32 */ 4;
+ }
+ omap2_mcspi_set_enable(spi, 1);
}
return count;
}
@@ -873,8 +895,12 @@
} while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
- /* (3 << 8) | (2 << 3) | */
- OMAP2_MCSPI_SYSCONFIG_AUTOIDLE);
+ OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
+ OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
+ OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
+
+ mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
+ OMAP2_MCSPI_WAKEUPENABLE_WKEN);
omap2_mcspi_set_master_mode(master);
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index aa90ddb..8980a56 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -514,6 +514,8 @@
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+
master->bus_num = 2; /* "official" */
master->num_chipselect = 4;
master->setup = uwire_setup;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 2a5abc0..f1db395 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -258,6 +258,11 @@
struct spi_bitbang *bitbang =
container_of(work, struct spi_bitbang, work);
unsigned long flags;
+ int do_setup = -1;
+ int (*setup_transfer)(struct spi_device *,
+ struct spi_transfer *);
+
+ setup_transfer = bitbang->setup_transfer;
spin_lock_irqsave(&bitbang->lock, flags);
bitbang->busy = 1;
@@ -269,8 +274,6 @@
unsigned tmp;
unsigned cs_change;
int status;
- int (*setup_transfer)(struct spi_device *,
- struct spi_transfer *);
m = container_of(bitbang->queue.next, struct spi_message,
queue);
@@ -287,19 +290,19 @@
tmp = 0;
cs_change = 1;
status = 0;
- setup_transfer = NULL;
list_for_each_entry (t, &m->transfers, transfer_list) {
- /* override or restore speed and wordsize */
- if (t->speed_hz || t->bits_per_word) {
- setup_transfer = bitbang->setup_transfer;
+ /* override speed or wordsize? */
+ if (t->speed_hz || t->bits_per_word)
+ do_setup = 1;
+
+ /* init (-1) or override (1) transfer params */
+ if (do_setup != 0) {
if (!setup_transfer) {
status = -ENOPROTOOPT;
break;
}
- }
- if (setup_transfer) {
status = setup_transfer(spi, t);
if (status < 0)
break;
@@ -363,9 +366,10 @@
m->status = status;
m->complete(m->context);
- /* restore speed and wordsize */
- if (setup_transfer)
+ /* restore speed and wordsize if it was overridden */
+ if (do_setup == 1)
setup_transfer(spi, NULL);
+ do_setup = 0;
/* normally deactivate chipselect ... unless no error and
* cs_change has hinted that the next message will probably
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4..606e7a4 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -58,15 +58,20 @@
/* Bit masks for spi_device.mode management. Note that incorrect
- * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other
- * devices on a shared bus: CS_HIGH, because this device will be
- * active when it shouldn't be; 3WIRE, because when active it won't
- * behave as it should.
+ * settings for some settings can cause *lots* of trouble for other
+ * devices on a shared bus:
*
- * REVISIT should changing those two modes be privileged?
+ * - CS_HIGH ... this device will be active when it shouldn't be
+ * - 3WIRE ... when active, it won't behave as it should
+ * - NO_CS ... there will be no explicit message boundaries; this
+ * is completely incompatible with the shared bus model
+ * - READY ... transfers may proceed when they shouldn't.
+ *
+ * REVISIT should changing those flags be privileged?
*/
#define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
- | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
+ | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
+ | SPI_NO_CS | SPI_READY)
struct spidev_data {
dev_t devt;
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 3fd3e3b..3c6feed 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -49,29 +49,54 @@
static inline u32 ssb_irqflag(struct ssb_device *dev)
{
- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
+ if (tpsflag)
+ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
+ else
+ /* not irq supported */
+ return 0x3f;
+}
+
+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
+{
+ struct ssb_bus *bus = rdev->bus;
+ int i;
+ for (i = 0; i < bus->nr_devices; i++) {
+ struct ssb_device *dev;
+ dev = &(bus->devices[i]);
+ if (ssb_irqflag(dev) == irqflag)
+ return dev;
+ }
+ return NULL;
}
/* Get the MIPS IRQ assignment for a specified device.
* If unassigned, 0 is returned.
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
*/
unsigned int ssb_mips_irq(struct ssb_device *dev)
{
struct ssb_bus *bus = dev->bus;
+ struct ssb_device *mdev = bus->mipscore.dev;
u32 irqflag;
u32 ipsflag;
u32 tmp;
unsigned int irq;
irqflag = ssb_irqflag(dev);
+ if (irqflag == 0x3f)
+ return 6;
ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
for (irq = 1; irq <= 4; irq++) {
tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
if (tmp == irqflag)
break;
}
- if (irq == 5)
- irq = 0;
+ if (irq == 5) {
+ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
+ irq = 0;
+ }
return irq;
}
@@ -97,25 +122,56 @@
struct ssb_device *mdev = bus->mipscore.dev;
u32 irqflag = ssb_irqflag(dev);
+ BUG_ON(oldirq == 6);
+
dev->irq = irq + 2;
- ssb_dprintk(KERN_INFO PFX
- "set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.coreid, oldirq, irq);
/* clear the old irq */
if (oldirq == 0)
ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
- else
+ else if (oldirq != 5)
clear_irq(bus, oldirq);
/* assign the new one */
if (irq == 0) {
ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
} else {
+ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
+ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
+ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
+ struct ssb_device *olddev = find_device(dev, oldipsflag);
+ if (olddev)
+ set_irq(olddev, 0);
+ }
irqflag <<= ipsflag_irq_shift[irq];
- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
ssb_write32(mdev, SSB_IPSFLAG, irqflag);
}
+ ssb_dprintk(KERN_INFO PFX
+ "set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.coreid, oldirq+2, irq+2);
+}
+
+static void print_irq(struct ssb_device *dev, unsigned int irq)
+{
+ int i;
+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+ ssb_dprintk(KERN_INFO PFX
+ "core 0x%04x, irq :", dev->id.coreid);
+ for (i = 0; i <= 6; i++) {
+ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
+ }
+ ssb_dprintk("\n");
+}
+
+static void dump_irq(struct ssb_bus *bus)
+{
+ int i;
+ for (i = 0; i < bus->nr_devices; i++) {
+ struct ssb_device *dev;
+ dev = &(bus->devices[i]);
+ print_irq(dev, ssb_mips_irq(dev));
+ }
}
static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
@@ -197,16 +253,23 @@
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
for (irq = 2, i = 0; i < bus->nr_devices; i++) {
+ int mips_irq;
dev = &(bus->devices[i]);
- dev->irq = ssb_mips_irq(dev) + 2;
+ mips_irq = ssb_mips_irq(dev);
+ if (mips_irq > 4)
+ dev->irq = 0;
+ else
+ dev->irq = mips_irq + 2;
+ if (dev->irq > 5)
+ continue;
switch (dev->id.coreid) {
case SSB_DEV_USB11_HOST:
/* shouldn't need a separate irq line for non-4710, most of them have a proper
* external usb controller on the pci */
if ((bus->chip_id == 0x4710) && (irq <= 4)) {
set_irq(dev, irq++);
- break;
}
+ break;
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
@@ -220,6 +283,8 @@
}
}
}
+ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+ dump_irq(bus);
ssb_mips_serial_init(mcore);
ssb_mips_flash_detect(mcore);
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index fbfadba..100e7a5 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -583,7 +583,7 @@
ssb_printk(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Failed to write to SPROM.\n");
failed = 1;
break;
@@ -591,7 +591,7 @@
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_printk("\n" KERN_NOTICE PFX
+ ssb_printk(KERN_NOTICE PFX
"Could not disable SPROM write access.\n");
failed = 1;
}
@@ -678,7 +678,8 @@
sprom->board_rev = tuple.TupleData[1];
break;
case SSB_PCMCIA_CIS_PA:
- GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+ GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+ (tuple.TupleDataLen != 10),
"pa tpl size");
sprom->pa0b0 = tuple.TupleData[1] |
((u16)tuple.TupleData[2] << 8);
@@ -718,7 +719,8 @@
sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
break;
case SSB_PCMCIA_CIS_BFLAGS:
- GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+ GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+ (tuple.TupleDataLen != 5),
"bfl tpl size");
sprom->boardflags_lo = tuple.TupleData[1] |
((u16)tuple.TupleData[2] << 8);
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 348bf61..975ecdd 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -103,8 +103,6 @@
source "drivers/staging/stlc45xx/Kconfig"
-source "drivers/staging/uc2322/Kconfig"
-
source "drivers/staging/b3dfg/Kconfig"
source "drivers/staging/phison/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8d61d7b..2241ae1 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -34,7 +34,6 @@
obj-$(CONFIG_DST) += dst/
obj-$(CONFIG_POHMELFS) += pohmelfs/
obj-$(CONFIG_STLC45XX) += stlc45xx/
-obj-$(CONFIG_USB_SERIAL_ATEN2011) += uc2322/
obj-$(CONFIG_B3DFG) += b3dfg/
obj-$(CONFIG_IDE_PHISON) += phison/
obj-$(CONFIG_PLAN9AUTH) += p9auth/
diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c
index fe72240..f934393 100644
--- a/drivers/staging/android/lowmemorykiller.c
+++ b/drivers/staging/android/lowmemorykiller.c
@@ -96,19 +96,21 @@
read_lock(&tasklist_lock);
for_each_process(p) {
+ struct mm_struct *mm;
int oom_adj;
task_lock(p);
- if (!p->mm) {
+ mm = p->mm;
+ if (!mm) {
task_unlock(p);
continue;
}
- oom_adj = p->oomkilladj;
+ oom_adj = mm->oom_adj;
if (oom_adj < min_adj) {
task_unlock(p);
continue;
}
- tasksize = get_mm_rss(p->mm);
+ tasksize = get_mm_rss(mm);
task_unlock(p);
if (tasksize <= 0)
continue;
diff --git a/drivers/staging/b3dfg/Kconfig b/drivers/staging/b3dfg/Kconfig
index 5242310..9e6573c 100644
--- a/drivers/staging/b3dfg/Kconfig
+++ b/drivers/staging/b3dfg/Kconfig
@@ -1,5 +1,6 @@
config B3DFG
tristate "Brontes 3d Frame Framegrabber"
+ depends on PCI
default n
---help---
This driver provides support for the Brontes 3d Framegrabber
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index baf83c6..e3c3adc 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -45,6 +45,8 @@
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include "comedi_pci.h"
#include "jr3_pci.h"
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 92121cf..5d9bab3 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -111,9 +111,13 @@
#define PCI_VENDOR_ID_S626 0x1131
#define PCI_DEVICE_ID_S626 0x7146
+/*
+ * For devices with vendor:device id == 0x1131:0x7146 you must specify
+ * also subvendor:subdevice ids, because otherwise it will conflict with
+ * Philips SAA7146 media/dvb based cards.
+ */
static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
- {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- 0},
+ {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
{0}
};
@@ -499,25 +503,26 @@
resource_size_t resourceStart;
dma_addr_t appdma;
struct comedi_subdevice *s;
- struct pci_dev *pdev;
+ const struct pci_device_id *ids;
+ struct pci_dev *pdev = NULL;
if (alloc_private(dev, sizeof(struct s626_private)) < 0)
return -ENOMEM;
- for (pdev = pci_get_device(PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
- NULL); pdev != NULL;
- pdev = pci_get_device(PCI_VENDOR_ID_S626,
- PCI_DEVICE_ID_S626, pdev)) {
- if (it->options[0] || it->options[1]) {
- if (pdev->bus->number == it->options[0] &&
- PCI_SLOT(pdev->devfn) == it->options[1]) {
+ for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
+ ids = &s626_pci_table[i];
+ do {
+ pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor,
+ ids->subdevice, pdev);
+
+ if ((it->options[0] || it->options[1]) && pdev) {
/* matches requested bus/slot */
+ if (pdev->bus->number == it->options[0] &&
+ PCI_SLOT(pdev->devfn) == it->options[1])
+ break;
+ } else
break;
- }
- } else {
- /* no bus/slot specified */
- break;
- }
+ } while (1);
}
devpriv->pdev = pdev;
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c
index a5e4aca..bb22347 100644
--- a/drivers/staging/go7007/s2250-loader.c
+++ b/drivers/staging/go7007/s2250-loader.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <dvb-usb.h>
diff --git a/drivers/staging/heci/Kconfig b/drivers/staging/heci/Kconfig
index ae8d588..c7206f8 100644
--- a/drivers/staging/heci/Kconfig
+++ b/drivers/staging/heci/Kconfig
@@ -1,5 +1,6 @@
config HECI
tristate "Intel Management Engine Interface (MEI) Support"
+ depends on PCI
---help---
The Intel Management Engine Interface (Intel MEI) driver allows
applications to access the Active Management Technology
diff --git a/drivers/staging/meilhaus/TODO b/drivers/staging/meilhaus/TODO
index 6ec2520..d6ce398 100644
--- a/drivers/staging/meilhaus/TODO
+++ b/drivers/staging/meilhaus/TODO
@@ -7,4 +7,4 @@
- possible comedi merge
Please send cleanup patches to Greg Kroah-Hartman <greg@kroah.com>
-and CC: David Kiliani <mail@davidkiliani.de>
+and CC: David Kiliani <mail@davidkiliani.de> and Meilhaus Support <support@meilhaus.de>
diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c
index 1cdfe69..04e2f92 100644
--- a/drivers/staging/rspiusb/rspiusb.c
+++ b/drivers/staging/rspiusb/rspiusb.c
@@ -444,8 +444,7 @@
__func__, status);
pdx->pendingWrite = 0;
- usb_buffer_free(urb->dev, urb->transfer_buffer_length,
- urb->transfer_buffer, urb->transfer_dma);
+ kfree(urb->transfer_buffer);
}
int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
@@ -457,9 +456,7 @@
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb != NULL) {
- kbuf =
- usb_buffer_alloc(pdx->udev, len, GFP_KERNEL,
- &urb->transfer_dma);
+ kbuf = kmalloc(len, GFP_KERNEL);
if (!kbuf) {
dev_err(&pdx->udev->dev, "buffer_alloc failed\n");
return -ENOMEM;
@@ -470,7 +467,6 @@
}
usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf,
len, piusb_write_bulk_callback, pdx);
- urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dev_err(&pdx->udev->dev,
@@ -641,7 +637,7 @@
numPagesRequired =
((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
dbg("Number of pages needed = %d", numPagesRequired);
- maplist_p = vmalloc(numPagesRequired * sizeof(struct page));
+ maplist_p = vmalloc(numPagesRequired * sizeof(struct page *));
if (!maplist_p) {
dbg("Can't Allocate Memory for maplist_p");
return -ENOMEM;
@@ -712,9 +708,7 @@
usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i],
pdx->udev,
epAddr,
- (dma_addr_t *) sg_dma_address(&pdx->
- sgl[frameInfo]
- [i]),
+ NULL, // non-DMA HC? buy a better hardware
sg_dma_len(&pdx->sgl[frameInfo][i]),
piusb_readPIXEL_callback, (void *)pdx);
pdx->PixelUrb[frameInfo][i]->transfer_dma =
@@ -722,6 +716,8 @@
pdx->PixelUrb[frameInfo][i]->transfer_flags =
URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT;
}
+ if (i == 0)
+ return -EINVAL;
/* only interrupt when last URB completes */
pdx->PixelUrb[frameInfo][--i]->transfer_flags &= ~URB_NO_INTERRUPT;
pdx->pendedPixelUrbs[frameInfo] =
diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h
index 85175c1..25b53ac 100644
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -43,9 +43,6 @@
#include "rtmp_type.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#if !defined(RT2860) && !defined(RT30xx)
-#include <linux/kthread.h>
-#endif
#include <linux/spinlock.h>
#include <linux/init.h>
@@ -166,9 +163,7 @@
#ifndef RT30xx
typedef struct pid * THREAD_PID;
-#ifdef RT2860
#define THREAD_PID_INIT_VALUE NULL
-#endif
#define GET_PID(_v) find_get_pid(_v)
#define GET_PID_NUMBER(_v) pid_nr(_v)
#define CHECK_PID_LEGALITY(_pid) if (pid_nr(_pid) >= 0)
@@ -188,12 +183,12 @@
dma_addr_t pAd_pa;
#endif
#ifdef RT2870
- struct usb_device *pUsb_Dev;
+ struct usb_device *pUsb_Dev;
#ifndef RT30xx
- struct task_struct *MLMEThr_task;
- struct task_struct *RTUSBCmdThr_task;
- struct task_struct *TimerQThr_task;
+ THREAD_PID MLMEThr_pid;
+ THREAD_PID RTUSBCmdThr_pid;
+ THREAD_PID TimerQThr_pid;
#endif
#ifdef RT30xx
struct pid *MLMEThr_pid;
diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c
index dd01c64..a4e8696 100644
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -235,7 +235,7 @@
DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
@@ -348,7 +348,7 @@
DBGPRINT(RT_DEBUG_TRACE,( "<---RTUSBCmdThread\n"));
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = NULL;
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = NULL;
@@ -447,7 +447,7 @@
DBGPRINT(RT_DEBUG_TRACE,( "<---%s\n",__func__));
#ifndef RT30xx
- pObj->TimerQThr_task = NULL;
+ pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = NULL;
@@ -883,46 +883,69 @@
// Terminate Threads
#ifndef RT30xx
- BUG_ON(pObj->TimerQThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->TimerQThr_task))
+ CHECK_PID_LEGALITY(pObj->TimerQThr_pid)
{
POS_COOKIE pObj = (POS_COOKIE)pAd->OS_Cookie;
- printk(KERN_DEBUG "Terminate the TimerQThr pid=%d!\n",
- pid_nr(task_pid(pObj->TimerQThr_task)));
+ printk("Terminate the TimerQThr_pid=%d!\n", GET_PID_NUMBER(pObj->TimerQThr_pid));
mb();
pAd->TimerFunc_kill = 1;
mb();
- kthread_stop(pObj->TimerQThr_task);
- pObj->TimerQThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->TimerQThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk(KERN_WARNING "%s: unable to stop TimerQThread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->TimerQThr_pid), ret);
+ }
+ else
+ {
+ wait_for_completion(&pAd->TimerQComplete);
+ pObj->TimerQThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
- BUG_ON(pObj->MLMEThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task))
+ CHECK_PID_LEGALITY(pObj->MLMEThr_pid)
{
- printk(KERN_DEBUG "Terminate the MLMEThr pid=%d!\n",
- pid_nr(task_pid(pObj->MLMEThr_task)));
+ printk("Terminate the MLMEThr_pid=%d!\n", GET_PID_NUMBER(pObj->MLMEThr_pid));
mb();
pAd->mlme_kill = 1;
//RT28XX_MLME_HANDLER(pAd);
mb();
- kthread_stop(pObj->MLMEThr_task);
- pObj->MLMEThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->MLMEThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk (KERN_WARNING "%s: unable to Mlme thread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->MLMEThr_pid), ret);
+ }
+ else
+ {
+ //wait_for_completion (&pAd->notify);
+ wait_for_completion (&pAd->mlmeComplete);
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
- BUG_ON(pObj->RTUSBCmdThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
{
- printk(KERN_DEBUG "Terminate the RTUSBCmdThr pid=%d!\n",
- pid_nr(task_pid(pObj->RTUSBCmdThr_task)));
+ printk("Terminate the RTUSBCmdThr_pid=%d!\n", GET_PID_NUMBER(pObj->RTUSBCmdThr_pid));
mb();
NdisAcquireSpinLock(&pAd->CmdQLock);
pAd->CmdQ.CmdQState = RT2870_THREAD_STOPED;
NdisReleaseSpinLock(&pAd->CmdQLock);
mb();
//RTUSBCMDUp(pAd);
- kthread_stop(pObj->RTUSBCmdThr_task);
- pObj->RTUSBCmdThr_task = NULL;
+ ret = KILL_THREAD_PID(pObj->RTUSBCmdThr_pid, SIGTERM, 1);
+ if (ret)
+ {
+ printk(KERN_WARNING "%s: unable to RTUSBCmd thread, pid=%d, ret=%d!\n",
+ pAd->net_dev->name, GET_PID_NUMBER(pObj->RTUSBCmdThr_pid), ret);
+ }
+ else
+ {
+ //wait_for_completion (&pAd->notify);
+ wait_for_completion (&pAd->CmdQComplete);
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
+ }
}
#endif
#ifdef RT30xx
@@ -1045,7 +1068,7 @@
dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
{
#ifndef RT30xx
- printk(KERN_DEBUG "rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
+ printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
#endif
#ifdef RT30xx
printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c
index 0f4c8af..80909e9 100644
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -700,8 +700,8 @@
usb_dev = pObj->pUsb_Dev;
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
- pObj->RTUSBCmdThr_task = NULL;
+ pObj->MLMEThr_pid = THREAD_PID_INIT_VALUE;
+ pObj->RTUSBCmdThr_pid = THREAD_PID_INIT_VALUE;
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
@@ -743,7 +743,7 @@
PRTMP_ADAPTER pAd = net_dev->ml_priv;
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
#ifndef RT30xx
- struct task_struct *tsk;
+ pid_t pid_number = -1;
#endif
#ifdef RT30xx
pid_t pid_number;
@@ -762,10 +762,10 @@
// Creat MLME Thread
#ifndef RT30xx
- pObj->MLMEThr_task = NULL;
- tsk = kthread_run(MlmeThread, pAd, "%s", pAd->net_dev->name);
-
- if (IS_ERR(tsk)) {
+ pObj->MLMEThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(MlmeThread, pAd, CLONE_VM);
+ if (pid_number < 0)
+ {
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = NULL;
@@ -778,7 +778,7 @@
}
#ifndef RT30xx
- pObj->MLMEThr_task = tsk;
+ pObj->MLMEThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->MLMEThr_pid = find_get_pid(pid_number);
@@ -788,10 +788,9 @@
// Creat Command Thread
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = NULL;
- tsk = kthread_run(RTUSBCmdThread, pAd, "%s", pAd->net_dev->name);
-
- if (IS_ERR(tsk) < 0)
+ pObj->RTUSBCmdThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(RTUSBCmdThread, pAd, CLONE_VM);
+ if (pid_number < 0)
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = NULL;
@@ -804,7 +803,7 @@
}
#ifndef RT30xx
- pObj->RTUSBCmdThr_task = tsk;
+ pObj->RTUSBCmdThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->RTUSBCmdThr_pid = find_get_pid(pid_number);
@@ -812,9 +811,9 @@
wait_for_completion(&(pAd->CmdQComplete));
#ifndef RT30xx
- pObj->TimerQThr_task = NULL;
- tsk = kthread_run(TimerQThread, pAd, "%s", pAd->net_dev->name);
- if (IS_ERR(tsk) < 0)
+ pObj->TimerQThr_pid= THREAD_PID_INIT_VALUE;
+ pid_number = kernel_thread(TimerQThread, pAd, CLONE_VM);
+ if (pid_number < 0)
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = NULL;
@@ -826,7 +825,7 @@
return NDIS_STATUS_FAILURE;
}
#ifndef RT30xx
- pObj->TimerQThr_task = tsk;
+ pObj->TimerQThr_pid = GET_PID(pid_number);
#endif
#ifdef RT30xx
pObj->TimerQThr_pid = find_get_pid(pid_number);
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index fd1b0c1..704b5c2 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -984,8 +984,7 @@
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
#ifndef RT30xx
- BUG_ON(pObj->RTUSBCmdThr_task == NULL);
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid)
#endif
#ifdef RT30xx
if (pObj->RTUSBCmdThr_pid < 0)
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5e5b3f2..2b8872b 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -79,6 +79,7 @@
{ \
{USB_DEVICE(0x148F,0x2770)}, /* Ralink */ \
{USB_DEVICE(0x1737,0x0071)}, /* Linksys WUSB600N */ \
+ {USB_DEVICE(0x1737,0x0070)}, /* Linksys */ \
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */ \
{USB_DEVICE(0x148F,0x3070)}, /* Ralink */ \
{USB_DEVICE(0x0B05,0x1731)}, /* Asus */ \
@@ -89,15 +90,18 @@
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \
+ {USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom WL-608 */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
+ {USB_DEVICE(0x2019,0xED14)}, /* Planex Communications, Inc. */ \
{USB_DEVICE(0x2019,0xAB25)}, /* Planex Communications, Inc. RT3070 */ \
{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */ \
{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */ \
{USB_DEVICE(0x14B2,0x3C07)}, /* AL */ \
{USB_DEVICE(0x14B2,0x3C12)}, /* AL */ \
{USB_DEVICE(0x050D,0x8053)}, /* Belkin */ \
+ {USB_DEVICE(0x050D,0x815C)}, /* Belkin */ \
{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */ \
{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */ \
{USB_DEVICE(0x07AA,0x002F)}, /* Corega */ \
@@ -586,16 +590,14 @@
#define RTUSBMlmeUp(pAd) \
{ \
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; \
- BUG_ON(pObj->MLMEThr_task == NULL); \
- CHECK_PID_LEGALITY(task_pid(pObj->MLMEThr_task)) \
+ CHECK_PID_LEGALITY(pObj->MLMEThr_pid) \
up(&(pAd->mlme_semaphore)); \
}
#define RTUSBCMDUp(pAd) \
{ \
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; \
- BUG_ON(pObj->RTUSBCmdThr_task == NULL); \
- CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task)) \
+ CHECK_PID_LEGALITY(pObj->RTUSBCmdThr_pid) \
up(&(pAd->RTUSBCmd_semaphore)); \
}
#endif
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index 93af37e..54b4b71 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -461,19 +461,19 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- strcpy(wrqu->name, "802.11");
+ strlcpy(wrqu->name, "802.11", IFNAMSIZ);
if(ieee->modulation & IEEE80211_CCK_MODULATION){
- strcat(wrqu->name, "b");
+ strlcat(wrqu->name, "b", IFNAMSIZ);
if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "/g");
+ strlcat(wrqu->name, "/g", IFNAMSIZ);
}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "g");
+ strlcat(wrqu->name, "g", IFNAMSIZ);
if((ieee->state == IEEE80211_LINKED) ||
(ieee->state == IEEE80211_LINKED_SCANNING))
- strcat(wrqu->name," linked");
+ strlcat(wrqu->name," link", IFNAMSIZ);
else if(ieee->state != IEEE80211_NOLINK)
- strcat(wrqu->name," link..");
+ strlcat(wrqu->name," .....", IFNAMSIZ);
return 0;
diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
index 4b5552c..770f412 100644
--- a/drivers/staging/rtl8192su/Kconfig
+++ b/drivers/staging/rtl8192su/Kconfig
@@ -1,6 +1,6 @@
config RTL8192SU
tristate "RealTek RTL8192SU Wireless LAN NIC driver"
depends on PCI
- depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+ depends on WIRELESS_EXT
default N
---help---
diff --git a/drivers/staging/rtl8192su/ieee80211.h b/drivers/staging/rtl8192su/ieee80211.h
index 0edb09a..ea97393 100644
--- a/drivers/staging/rtl8192su/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211.h
@@ -2645,7 +2645,7 @@
struct sk_buff *frag,
int hdr_len);
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
index 720bfcb..5e3a2cb 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -2645,7 +2645,7 @@
struct sk_buff *frag,
int hdr_len);
-extern int ieee80211_xmit(struct sk_buff *skb,
+extern int rtl8192_ieee80211_xmit(struct sk_buff *skb,
struct net_device *dev);
extern void ieee80211_txb_free(struct ieee80211_txb *);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
index f408b45..759032d 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
@@ -118,7 +118,6 @@
#else
ieee = (struct ieee80211_device *)dev->priv;
#endif
- dev->hard_start_xmit = ieee80211_xmit;
memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
ieee->dev = dev;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
index 1f50c46..191dc3f 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
@@ -548,21 +548,21 @@
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- strcpy(wrqu->name, "802.11");
+ strlcpy(wrqu->name, "802.11", IFNAMSIZ);
if(ieee->modulation & IEEE80211_CCK_MODULATION){
- strcat(wrqu->name, "b");
+ strlcat(wrqu->name, "b", IFNAMSIZ);
if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "/g");
+ strlcat(wrqu->name, "/g", IFNAMSIZ);
}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
- strcat(wrqu->name, "g");
+ strlcat(wrqu->name, "g", IFNAMSIZ);
if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
- strcat(wrqu->name, "/n");
+ strlcat(wrqu->name, "/n", IFNAMSIZ);
if((ieee->state == IEEE80211_LINKED) ||
(ieee->state == IEEE80211_LINKED_SCANNING))
- strcat(wrqu->name," linked");
+ strlcat(wrqu->name, " link", IFNAMSIZ);
else if(ieee->state != IEEE80211_NOLINK)
- strcat(wrqu->name," link..");
+ strlcat(wrqu->name, " .....", IFNAMSIZ);
return 0;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
index 7294572..cba12b8 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -618,7 +618,7 @@
}
}
-int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
+int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
struct ieee80211_device *ieee = netdev_priv(dev);
@@ -943,5 +943,6 @@
return 1;
}
+EXPORT_SYMBOL(rtl8192_ieee80211_xmit);
EXPORT_SYMBOL(ieee80211_txb_free);
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index f1423d7..70f81a8 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -12132,6 +12132,19 @@
}
#endif
+static const struct net_device_ops rtl8192_netdev_ops = {
+ .ndo_open = rtl8192_open,
+ .ndo_stop = rtl8192_close,
+ .ndo_get_stats = rtl8192_stats,
+ .ndo_tx_timeout = tx_timeout,
+ .ndo_do_ioctl = rtl8192_ioctl,
+ .ndo_set_multicast_list = r8192_set_multicast,
+ .ndo_set_mac_address = r8192_set_mac_adr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_start_xmit = rtl8192_ieee80211_xmit,
+};
+
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -12186,15 +12199,7 @@
priv->ops = &rtl8192u_ops;
#endif
- dev->open = rtl8192_open;
- dev->stop = rtl8192_close;
- //dev->hard_start_xmit = rtl8192_8023_hard_start_xmit;
- dev->tx_timeout = tx_timeout;
- //dev->wireless_handlers = &r8192_wx_handlers_def;
- dev->do_ioctl = rtl8192_ioctl;
- dev->set_multicast_list = r8192_set_multicast;
- dev->set_mac_address = r8192_set_mac_adr;
- dev->get_stats = rtl8192_stats;
+ dev->netdev_ops = &rtl8192_netdev_ops;
//DMESG("Oops: i'm coming\n");
#if WIRELESS_EXT >= 12
diff --git a/drivers/staging/rtl8192su/r8192U_pm.c b/drivers/staging/rtl8192su/r8192U_pm.c
index 92c95aa..b1531a8 100644
--- a/drivers/staging/rtl8192su/r8192U_pm.c
+++ b/drivers/staging/rtl8192su/r8192U_pm.c
@@ -35,7 +35,9 @@
return 0;
}
- dev->stop(dev);
+ if (dev->netdev_ops->ndo_stop)
+ dev->netdev_ops->ndo_stop(dev);
+
mdelay(10);
netif_device_detach(dev);
@@ -61,7 +63,9 @@
}
netif_device_attach(dev);
- dev->open(dev);
+
+ if (dev->netdev_ops->ndo_open)
+ dev->netdev_ops->ndo_open(dev);
}
return 0;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 90b29b5..0fdf8c6 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -360,18 +360,18 @@
if (port_paranoia_check(port, __func__) != 0) {
dbg("%s - port_paranoia_check, exiting\n", __func__);
qt_port->ReadBulkStopped = 1;
- return;
+ goto exit;
}
if (!serial) {
dbg("%s - bad serial pointer, exiting\n", __func__);
- return;
+ goto exit;
}
if (qt_port->closePending == 1) {
/* Were closing , stop reading */
dbg("%s - (qt_port->closepending == 1\n", __func__);
qt_port->ReadBulkStopped = 1;
- return;
+ goto exit;
}
/*
@@ -381,7 +381,7 @@
*/
if (qt_port->RxHolding == 1) {
qt_port->ReadBulkStopped = 1;
- return;
+ goto exit;
}
if (urb->status) {
@@ -389,7 +389,7 @@
dbg("%s - nonzero read bulk status received: %d\n",
__func__, urb->status);
- return;
+ goto exit;
}
if (tty && RxCount) {
@@ -463,6 +463,8 @@
}
schedule_work(&port->work);
+exit:
+ tty_kref_put(tty);
}
/*
@@ -736,6 +738,11 @@
if (!qt_port) {
dbg("%s: kmalloc for quatech_port (%d) failed!.",
__func__, i);
+ for(--i; i >= 0; i--) {
+ port = serial->port[i];
+ kfree(usb_get_serial_port_data(port));
+ usb_set_serial_port_data(port, NULL);
+ }
return -ENOMEM;
}
spin_lock_init(&qt_port->lock);
@@ -866,7 +873,7 @@
}
-int qt_open(struct tty_struct *tty,
+static int qt_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
@@ -1041,17 +1048,19 @@
}
}
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static void qt_close(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct quatech_port *qt_port;
struct quatech_port *port0;
+ struct tty_struct *tty;
int status;
unsigned int index;
status = 0;
dbg("%s - port %d\n", __func__, port->number);
+
+ tty = tty_port_tty_get(&port->port);
index = tty->index - serial->minor;
qt_port = qt_get_port_private(port);
@@ -1066,6 +1075,7 @@
/* wait up to for transmitter to empty */
if (serial->dev)
qt_block_until_empty(tty, qt_port);
+ tty_kref_put(tty);
/* Close uart channel */
status = qt_close_channel(serial, index);
diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c
index cfdaac9..a137c78 100644
--- a/drivers/staging/stlc45xx/stlc45xx.c
+++ b/drivers/staging/stlc45xx/stlc45xx.c
@@ -2235,24 +2235,6 @@
stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
}
-static int stlc45xx_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct stlc45xx *stlc = hw->priv;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- memcpy(stlc->bssid, conf->bssid, ETH_ALEN);
- stlc45xx_tx_setup(stlc);
-
- mutex_unlock(&stlc->mutex);
-
- return 0;
-}
-
static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct stlc45xx *stlc = hw->priv;
@@ -2295,6 +2277,14 @@
{
struct stlc45xx *stlc = hw->priv;
+ stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
+ mutex_lock(&stlc->mutex);
+
+ memcpy(stlc->bssid, info->bssid, ETH_ALEN);
+ stlc45xx_tx_setup(stlc);
+
+ mutex_unlock(&stlc->mutex);
+
if (changed & BSS_CHANGED_ASSOC) {
stlc->associated = info->assoc;
if (info->assoc)
@@ -2357,7 +2347,6 @@
.add_interface = stlc45xx_op_add_interface,
.remove_interface = stlc45xx_op_remove_interface,
.config = stlc45xx_op_config,
- .config_interface = stlc45xx_op_config_interface,
.configure_filter = stlc45xx_op_configure_filter,
.tx = stlc45xx_op_tx,
.bss_info_changed = stlc45xx_op_bss_info_changed,
diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig
deleted file mode 100644
index 2e0c6e79..0000000
--- a/drivers/staging/uc2322/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config USB_SERIAL_ATEN2011
- tristate "ATEN 2011 USB to serial device support"
- depends on USB_SERIAL
- default N
- ---help---
- Say Y here if you want to use a ATEN 2011 dual port USB to serial
- adapter.
-
- To compile this driver as a module, choose M here: the module will be
- called aten2011.
diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile
deleted file mode 100644
index 49c18d6..0000000
--- a/drivers/staging/uc2322/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_ATEN2011) += aten2011.o
diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO
deleted file mode 100644
index c189a64..0000000
--- a/drivers/staging/uc2322/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-TODO:
- - checkpatch.pl cleanups
- - remove dead and useless code (auditing the tty ioctls to
- verify that they really are correct and needed.)
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Russell Lang <gsview@ghostgum.com.au>.
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
deleted file mode 100644
index 39d0926..0000000
--- a/drivers/staging/uc2322/aten2011.c
+++ /dev/null
@@ -1,2430 +0,0 @@
-/*
- * Aten 2011 USB serial driver for 4 port devices
- *
- * Copyright (C) 2000 Inside Out Networks
- * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2009 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */
-#define ZLP_REG2 0x3B /* Zero_Flag_Reg2 59 */
-#define ZLP_REG3 0x3C /* Zero_Flag_Reg3 60 */
-#define ZLP_REG4 0x3D /* Zero_Flag_Reg4 61 */
-#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */
-
-/* Interrupt Rotinue Defines */
-#define SERIAL_IIR_RLS 0x06
-#define SERIAL_IIR_RDA 0x04
-#define SERIAL_IIR_CTI 0x0c
-#define SERIAL_IIR_THR 0x02
-#define SERIAL_IIR_MS 0x00
-
-/* Emulation of the bit mask on the LINE STATUS REGISTER. */
-#define SERIAL_LSR_DR 0x0001
-#define SERIAL_LSR_OE 0x0002
-#define SERIAL_LSR_PE 0x0004
-#define SERIAL_LSR_FE 0x0008
-#define SERIAL_LSR_BI 0x0010
-#define SERIAL_LSR_THRE 0x0020
-#define SERIAL_LSR_TEMT 0x0040
-#define SERIAL_LSR_FIFOERR 0x0080
-
-/* MSR bit defines(place holders) */
-#define ATEN_MSR_DELTA_CTS 0x10
-#define ATEN_MSR_DELTA_DSR 0x20
-#define ATEN_MSR_DELTA_RI 0x40
-#define ATEN_MSR_DELTA_CD 0x80
-
-/* Serial Port register Address */
-#define RECEIVE_BUFFER_REGISTER ((__u16)(0x00))
-#define TRANSMIT_HOLDING_REGISTER ((__u16)(0x00))
-#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01))
-#define INTERRUPT_IDENT_REGISTER ((__u16)(0x02))
-#define FIFO_CONTROL_REGISTER ((__u16)(0x02))
-#define LINE_CONTROL_REGISTER ((__u16)(0x03))
-#define MODEM_CONTROL_REGISTER ((__u16)(0x04))
-#define LINE_STATUS_REGISTER ((__u16)(0x05))
-#define MODEM_STATUS_REGISTER ((__u16)(0x06))
-#define SCRATCH_PAD_REGISTER ((__u16)(0x07))
-#define DIVISOR_LATCH_LSB ((__u16)(0x00))
-#define DIVISOR_LATCH_MSB ((__u16)(0x01))
-
-#define SP1_REGISTER ((__u16)(0x00))
-#define CONTROL1_REGISTER ((__u16)(0x01))
-#define CLK_MULTI_REGISTER ((__u16)(0x02))
-#define CLK_START_VALUE_REGISTER ((__u16)(0x03))
-#define DCR1_REGISTER ((__u16)(0x04))
-#define GPIO_REGISTER ((__u16)(0x07))
-
-#define SERIAL_LCR_DLAB ((__u16)(0x0080))
-
-/*
- * URB POOL related defines
- */
-#define NUM_URBS 16 /* URB Count */
-#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
-
-#define USB_VENDOR_ID_ATENINTL 0x0557
-#define ATENINTL_DEVICE_ID_2011 0x2011
-#define ATENINTL_DEVICE_ID_7820 0x7820
-
-static struct usb_device_id id_table[] = {
- { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) },
- { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) },
- { } /* terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* This structure holds all of the local port information */
-struct ATENINTL_port {
- int port_num; /*Actual port number in the device(1,2,etc)*/
- __u8 bulk_out_endpoint; /* the bulk out endpoint handle */
- unsigned char *bulk_out_buffer; /* buffer used for the bulk out endpoint */
- struct urb *write_urb; /* write URB for this port */
- __u8 bulk_in_endpoint; /* the bulk in endpoint handle */
- unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
- struct urb *read_urb; /* read URB for this port */
- __u8 shadowLCR; /* last LCR value received */
- __u8 shadowMCR; /* last MCR value received */
- char open;
- char chaseResponsePending;
- wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
- wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */
- struct async_icount icount;
- struct usb_serial_port *port; /* loop back to the owner of this object */
- /*Offsets*/
- __u8 SpRegOffset;
- __u8 ControlRegOffset;
- __u8 DcrRegOffset;
- /* for processing control URBS in interrupt context */
- struct urb *control_urb;
- char *ctrl_buf;
- int MsrLsr;
-
- struct urb *write_urb_pool[NUM_URBS];
- /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
- struct ktermios tmp_termios; /* stores the old termios settings */
- spinlock_t lock; /* private lock */
-};
-
-/* This structure holds all of the individual serial device information */
-struct ATENINTL_serial {
- __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */
- unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */
- struct urb *interrupt_read_urb; /* our interrupt urb */
- __u8 bulk_in_endpoint; /* the bulk in endpoint handle */
- unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
- struct urb *read_urb; /* our bulk read urb */
- __u8 bulk_out_endpoint; /* the bulk out endpoint handle */
- struct usb_serial *serial; /* loop back to the owner of this object */
- int ATEN2011_spectrum_2or4ports; /* this says the number of ports in the device */
- /* Indicates about the no.of opened ports of an individual USB-serial adapater. */
- unsigned int NoOfOpenPorts;
- /* a flag for Status endpoint polling */
- unsigned char status_polling_started;
-};
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios);
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- struct ktermios *old_termios);
-
-/*************************************
- * Bit definitions for each register *
- *************************************/
-#define LCR_BITS_5 0x00 /* 5 bits/char */
-#define LCR_BITS_6 0x01 /* 6 bits/char */
-#define LCR_BITS_7 0x02 /* 7 bits/char */
-#define LCR_BITS_8 0x03 /* 8 bits/char */
-#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
-
-#define LCR_STOP_1 0x00 /* 1 stop bit */
-#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */
-#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */
-#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */
-
-#define LCR_PAR_NONE 0x00 /* No parity */
-#define LCR_PAR_ODD 0x08 /* Odd parity */
-#define LCR_PAR_EVEN 0x18 /* Even parity */
-#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */
-#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */
-#define LCR_PAR_MASK 0x38 /* Mask for parity field */
-
-#define LCR_SET_BREAK 0x40 /* Set Break condition */
-#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */
-
-#define MCR_DTR 0x01 /* Assert DTR */
-#define MCR_RTS 0x02 /* Assert RTS */
-#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */
-#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */
-#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */
-#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */
-
-#define ATEN2011_MSR_CTS 0x10 /* Current state of CTS */
-#define ATEN2011_MSR_DSR 0x20 /* Current state of DSR */
-#define ATEN2011_MSR_RI 0x40 /* Current state of RI */
-#define ATEN2011_MSR_CD 0x80 /* Current state of CD */
-
-
-static int debug;
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.0"
-#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter"
-
-/*
- * Defines used for sending commands to port
- */
-
-#define ATEN_WDR_TIMEOUT (50) /* default urb timeout */
-
-/* Requests */
-#define ATEN_RD_RTYPE 0xC0
-#define ATEN_WR_RTYPE 0x40
-#define ATEN_RDREQ 0x0D
-#define ATEN_WRREQ 0x0E
-#define ATEN_CTRL_TIMEOUT 500
-#define VENDOR_READ_LENGTH (0x01)
-
-/* set to 1 for RS485 mode and 0 for RS232 mode */
-/* FIXME make this somehow dynamic and not build time specific */
-static int RS485mode;
-
-static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
- struct usb_device *dev = port->serial->dev;
- val = val & 0x00ff;
-
- dbg("%s: is %x, value %x", __func__, reg, val);
-
- return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
- ATEN_WR_RTYPE, val, reg, NULL, 0,
- ATEN_WDR_TIMEOUT);
-}
-
-static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
- struct usb_device *dev = port->serial->dev;
- int ret;
-
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
- ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
- ATEN_WDR_TIMEOUT);
- dbg("%s: offset is %x, return val %x", __func__, reg, *val);
- *val = (*val) & 0x00ff;
- return ret;
-}
-
-static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
- struct usb_device *dev = port->serial->dev;
- struct ATENINTL_serial *a_serial;
- __u16 minor;
-
- a_serial = usb_get_serial_data(port->serial);
- minor = port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- val = val & 0x00ff;
-
- /*
- * For the UART control registers,
- * the application number need to be Or'ed
- */
- if (a_serial->ATEN2011_spectrum_2or4ports == 4)
- val |= (((__u16)port->number - minor) + 1) << 8;
- else {
- if (((__u16) port->number - minor) == 0)
- val |= (((__u16)port->number - minor) + 1) << 8;
- else
- val |= (((__u16)port->number - minor) + 2) << 8;
- }
- dbg("%s: application number is %x", __func__, val);
-
- return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
- ATEN_WR_RTYPE, val, reg, NULL, 0,
- ATEN_WDR_TIMEOUT);
-}
-
-static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
- struct usb_device *dev = port->serial->dev;
- int ret = 0;
- __u16 wval;
- struct ATENINTL_serial *a_serial;
- __u16 minor = port->serial->minor;
-
- a_serial = usb_get_serial_data(port->serial);
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
-
- /* wval is same as application number */
- if (a_serial->ATEN2011_spectrum_2or4ports == 4)
- wval = (((__u16)port->number - minor) + 1) << 8;
- else {
- if (((__u16) port->number - minor) == 0)
- wval = (((__u16) port->number - minor) + 1) << 8;
- else
- wval = (((__u16) port->number - minor) + 2) << 8;
- }
- dbg("%s: application number is %x", __func__, wval);
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
- ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
- ATEN_WDR_TIMEOUT);
- *val = (*val) & 0x00ff;
- return ret;
-}
-
-static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr)
-{
- struct ATENINTL_port *ATEN2011_port;
- struct async_icount *icount;
- ATEN2011_port = port;
- icount = &ATEN2011_port->icount;
- if (newMsr &
- (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI |
- ATEN_MSR_DELTA_CD)) {
- icount = &ATEN2011_port->icount;
-
- /* update input line counters */
- if (newMsr & ATEN_MSR_DELTA_CTS)
- icount->cts++;
- if (newMsr & ATEN_MSR_DELTA_DSR)
- icount->dsr++;
- if (newMsr & ATEN_MSR_DELTA_CD)
- icount->dcd++;
- if (newMsr & ATEN_MSR_DELTA_RI)
- icount->rng++;
- }
-
- return 0;
-}
-
-static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr)
-{
- struct async_icount *icount;
-
- dbg("%s - %02x", __func__, newLsr);
-
- if (newLsr & SERIAL_LSR_BI) {
- /*
- * Parity and Framing errors only count if they occur exclusive
- * of a break being received.
- */
- newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
- }
-
- /* update input line counters */
- icount = &port->icount;
- if (newLsr & SERIAL_LSR_BI)
- icount->brk++;
- if (newLsr & SERIAL_LSR_OE)
- icount->overrun++;
- if (newLsr & SERIAL_LSR_PE)
- icount->parity++;
- if (newLsr & SERIAL_LSR_FE)
- icount->frame++;
-
- return 0;
-}
-
-static void ATEN2011_control_callback(struct urb *urb)
-{
- unsigned char *data;
- struct ATENINTL_port *ATEN2011_port;
- __u8 regval = 0x0;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __func__,
- urb->status);
- goto exit;
- }
-
- ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
- dbg("%s urb buffer size is %d", __func__, urb->actual_length);
- dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__,
- ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
- data = urb->transfer_buffer;
- regval = (__u8) data[0];
- dbg("%s data is %x", __func__, regval);
- if (ATEN2011_port->MsrLsr == 0)
- handle_newMsr(ATEN2011_port, regval);
- else if (ATEN2011_port->MsrLsr == 1)
- handle_newLsr(ATEN2011_port, regval);
-
-exit:
- return;
-}
-
-static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg,
- __u16 *val)
-{
- struct usb_device *dev = ATEN->port->serial->dev;
- struct usb_ctrlrequest *dr = NULL;
- unsigned char *buffer = NULL;
- int ret = 0;
- buffer = (__u8 *) ATEN->ctrl_buf;
-
- dr = (void *)(buffer + 2);
- dr->bRequestType = ATEN_RD_RTYPE;
- dr->bRequest = ATEN_RDREQ;
- dr->wValue = cpu_to_le16(Wval);
- dr->wIndex = cpu_to_le16(reg);
- dr->wLength = cpu_to_le16(2);
-
- usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0),
- (unsigned char *)dr, buffer, 2,
- ATEN2011_control_callback, ATEN);
- ATEN->control_urb->transfer_buffer_length = 2;
- ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC);
- return ret;
-}
-
-static void ATEN2011_interrupt_callback(struct urb *urb)
-{
- int result;
- int length;
- struct ATENINTL_port *ATEN2011_port;
- struct ATENINTL_serial *ATEN2011_serial;
- struct usb_serial *serial;
- __u16 Data;
- unsigned char *data;
- __u8 sp[5], st;
- int i;
- __u16 wval;
- int minor;
-
- dbg("%s", " : Entering");
-
- ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __func__,
- urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __func__,
- urb->status);
- goto exit;
- }
- length = urb->actual_length;
- data = urb->transfer_buffer;
-
- serial = ATEN2011_serial->serial;
-
- /* ATENINTL get 5 bytes
- * Byte 1 IIR Port 1 (port.number is 0)
- * Byte 2 IIR Port 2 (port.number is 1)
- * Byte 3 IIR Port 3 (port.number is 2)
- * Byte 4 IIR Port 4 (port.number is 3)
- * Byte 5 FIFO status for both */
-
- if (length && length > 5) {
- dbg("%s", "Wrong data !!!");
- return;
- }
-
- /* MATRIX */
- if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) {
- sp[0] = (__u8) data[0];
- sp[1] = (__u8) data[1];
- sp[2] = (__u8) data[2];
- sp[3] = (__u8) data[3];
- st = (__u8) data[4];
- } else {
- sp[0] = (__u8) data[0];
- sp[1] = (__u8) data[2];
- /* sp[2]=(__u8)data[2]; */
- /* sp[3]=(__u8)data[3]; */
- st = (__u8) data[4];
-
- }
- for (i = 0; i < serial->num_ports; i++) {
- ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
- minor = serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
- && (i != 0))
- wval =
- (((__u16) serial->port[i]->number -
- (__u16) (minor)) + 2) << 8;
- else
- wval =
- (((__u16) serial->port[i]->number -
- (__u16) (minor)) + 1) << 8;
- if (ATEN2011_port->open != 0) {
- if (sp[i] & 0x01) {
- dbg("SP%d No Interrupt !!!", i);
- } else {
- switch (sp[i] & 0x0f) {
- case SERIAL_IIR_RLS:
- dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
- ATEN2011_port->MsrLsr = 1;
- ATEN2011_get_reg(ATEN2011_port, wval,
- LINE_STATUS_REGISTER,
- &Data);
- break;
- case SERIAL_IIR_MS:
- dbg("Serial Port %d: Modem status change", i);
- ATEN2011_port->MsrLsr = 0;
- ATEN2011_get_reg(ATEN2011_port, wval,
- MODEM_STATUS_REGISTER,
- &Data);
- break;
- }
- }
- }
-
- }
-exit:
- if (ATEN2011_serial->status_polling_started == 0)
- return;
-
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result) {
- dev_err(&urb->dev->dev,
- "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
-
- return;
-}
-
-static void ATEN2011_bulk_in_callback(struct urb *urb)
-{
- int status;
- unsigned char *data;
- struct usb_serial *serial;
- struct usb_serial_port *port;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- struct tty_struct *tty;
-
- if (urb->status) {
- dbg("nonzero read bulk status received: %d", urb->status);
- return;
- }
-
- ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
- serial = port->serial;
-
- dbg("%s", "Entering...");
-
- data = urb->transfer_buffer;
- ATEN2011_serial = usb_get_serial_data(serial);
-
- if (urb->actual_length) {
- tty = tty_port_tty_get(&ATEN2011_port->port->port);
- if (tty) {
- tty_buffer_request_room(tty, urb->actual_length);
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
-
- ATEN2011_port->icount.rx += urb->actual_length;
- dbg("ATEN2011_port->icount.rx is %d:",
- ATEN2011_port->icount.rx);
- }
-
- if (!ATEN2011_port->read_urb) {
- dbg("%s", "URB KILLED !!!");
- return;
- }
-
- if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
- ATEN2011_port->read_urb->dev = serial->dev;
-
- status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
- if (status)
- dbg("usb_submit_urb(read bulk) failed, status = %d", status);
- }
-}
-
-static void ATEN2011_bulk_out_data_callback(struct urb *urb)
-{
- struct ATENINTL_port *ATEN2011_port;
- struct tty_struct *tty;
-
- if (urb->status) {
- dbg("nonzero write bulk status received:%d", urb->status);
- return;
- }
-
- ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
- dbg("%s", "Entering .........");
-
- tty = tty_port_tty_get(&ATEN2011_port->port->port);
-
- if (tty && ATEN2011_port->open)
- /* tell the tty driver that something has changed */
- tty_wakeup(tty);
-
- /* schedule_work(&ATEN2011_port->port->work); */
- tty_kref_put(tty);
-
-}
-
-#ifdef ATENSerialProbe
-static int ATEN2011_serial_probe(struct usb_serial *serial,
- const struct usb_device_id *id)
-{
-
- /*need to implement the mode_reg reading and updating\
- structures usb_serial_ device_type\
- (i.e num_ports, num_bulkin,bulkout etc) */
- /* Also we can update the changes attach */
- return 1;
-}
-#endif
-
-static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
-{
- int response;
- int j;
- struct usb_serial *serial;
- struct urb *urb;
- __u16 Data;
- int status;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- struct ktermios tmp_termios;
- int minor;
-
- serial = port->serial;
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return -ENODEV;
-
- ATEN2011_serial = usb_get_serial_data(serial);
- if (ATEN2011_serial == NULL)
- return -ENODEV;
-
- /* increment the number of opened ports counter here */
- ATEN2011_serial->NoOfOpenPorts++;
-
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
-
- /* Initialising the write urb pool */
- for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- ATEN2011_port->write_urb_pool[j] = urb;
-
- if (urb == NULL) {
- err("No more urbs???");
- continue;
- }
-
- urb->transfer_buffer = NULL;
- urb->transfer_buffer =
- kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
- if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __func__);
- continue;
- }
- }
-
-/*****************************************************************************
- * Initialize ATEN2011 -- Write Init values to corresponding Registers
- *
- * Register Index
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- *
- * 0x08 : SP1/2 Control Reg
- *****************************************************************************/
-
-/* NEED to check the fallowing Block */
-
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
- if (status < 0) {
- dbg("Reading Spreg failed");
- return -1;
- }
- Data |= 0x80;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- if (status < 0) {
- dbg("writing Spreg failed");
- return -1;
- }
-
- Data &= ~0x80;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- if (status < 0) {
- dbg("writing Spreg failed");
- return -1;
- }
-
-/* End of block to be checked */
-/**************************CHECK***************************/
-
- if (RS485mode == 0)
- Data = 0xC0;
- else
- Data = 0x00;
- status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
- if (status < 0) {
- dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
- return -1;
- } else
- dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
-
-/**************************CHECK***************************/
-
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
- if (status < 0) {
- dbg("Reading Controlreg failed");
- return -1;
- }
- Data |= 0x08; /* Driver done bit */
- Data |= 0x20; /* rx_disable */
- status = 0;
- status =
- set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
- if (status < 0) {
- dbg("writing Controlreg failed");
- return -1;
- }
- /*
- * do register settings here
- * Set all regs to the device default values.
- * First Disable all interrupts.
- */
-
- Data = 0x00;
- status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
- if (status < 0) {
- dbg("disableing interrupts failed");
- return -1;
- }
- /* Set FIFO_CONTROL_REGISTER to the default value */
- Data = 0x00;
- status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed");
- return -1;
- }
-
- Data = 0xcf; /* chk */
- status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing FIFO_CONTROL_REGISTER failed");
- return -1;
- }
-
- Data = 0x03; /* LCR_BITS_8 */
- status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
- ATEN2011_port->shadowLCR = Data;
-
- Data = 0x0b; /* MCR_DTR|MCR_RTS|MCR_MASTER_IE */
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- ATEN2011_port->shadowMCR = Data;
-
-#ifdef Check
- Data = 0x00;
- status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
- ATEN2011_port->shadowLCR = Data;
-
- Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */
- status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- Data = 0x0c;
- status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
- Data = 0x0;
- status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
- Data = 0x00;
- status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-
-/* Data = ATEN2011_port->shadowLCR; */ /* data latch disable */
- Data = Data & ~SERIAL_LCR_DLAB;
- status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
- ATEN2011_port->shadowLCR = Data;
-#endif
- /* clearing Bulkin and Bulkout Fifo */
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-
- Data = Data | 0x0c;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-
- Data = Data & ~0x0c;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- /* Finally enable all interrupts */
- Data = 0x0;
- Data = 0x0c;
- status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- /* clearing rx_disable */
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
- Data = Data & ~0x20;
- status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
- /* rx_negate */
- Data = 0x0;
- status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
- Data = Data | 0x10;
- status = 0;
- status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
- /*
- * Check to see if we've set up our endpoint info yet
- * (can't set it up in ATEN2011_startup as the structures
- * were not set up at that time.)
- */
- if (ATEN2011_serial->NoOfOpenPorts == 1) {
- /* start the status polling here */
- ATEN2011_serial->status_polling_started = 1;
- /* If not yet set, Set here */
- ATEN2011_serial->interrupt_in_buffer =
- serial->port[0]->interrupt_in_buffer;
- ATEN2011_serial->interrupt_in_endpoint =
- serial->port[0]->interrupt_in_endpointAddress;
- ATEN2011_serial->interrupt_read_urb =
- serial->port[0]->interrupt_in_urb;
-
- /* set up interrupt urb */
- usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb,
- serial->dev,
- usb_rcvintpipe(serial->dev,
- ATEN2011_serial->
- interrupt_in_endpoint),
- ATEN2011_serial->interrupt_in_buffer,
- ATEN2011_serial->interrupt_read_urb->
- transfer_buffer_length,
- ATEN2011_interrupt_callback, ATEN2011_serial,
- ATEN2011_serial->interrupt_read_urb->interval);
-
- /* start interrupt read for ATEN2011 *
- * will continue as long as ATEN2011 is connected */
-
- response =
- usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
- GFP_KERNEL);
- if (response) {
- dbg("%s - Error %d submitting interrupt urb",
- __func__, response);
- }
-
- }
-
- /*
- * See if we've set up our endpoint info yet
- * (can't set it up in ATEN2011_startup as the
- * structures were not set up at that time.)
- */
-
- dbg("port number is %d", port->number);
- dbg("serial number is %d", port->serial->minor);
- dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
- dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
- dbg("Interrupt endpoint is %d",
- port->interrupt_in_endpointAddress);
- dbg("port's number in the device is %d", ATEN2011_port->port_num);
- ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
- ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
- ATEN2011_port->read_urb = port->read_urb;
- ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress;
-
- minor = port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
-
- /* set up our bulk in urb */
- if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
- && (((__u16) port->number - (__u16) (minor)) != 0)) {
- usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- (port->
- bulk_in_endpointAddress +
- 2)), port->bulk_in_buffer,
- ATEN2011_port->read_urb->
- transfer_buffer_length,
- ATEN2011_bulk_in_callback, ATEN2011_port);
- } else
- usb_fill_bulk_urb(ATEN2011_port->read_urb,
- serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->
- bulk_in_endpointAddress),
- port->bulk_in_buffer,
- ATEN2011_port->read_urb->
- transfer_buffer_length,
- ATEN2011_bulk_in_callback, ATEN2011_port);
-
- dbg("ATEN2011_open: bulkin endpoint is %d",
- port->bulk_in_endpointAddress);
- response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
- if (response) {
- err("%s - Error %d submitting control urb", __func__,
- response);
- }
-
- /* initialize our wait queues */
- init_waitqueue_head(&ATEN2011_port->wait_chase);
- init_waitqueue_head(&ATEN2011_port->wait_command);
-
- /* initialize our icount structure */
- memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount));
-
- /* initialize our port settings */
- ATEN2011_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */
- ATEN2011_port->chaseResponsePending = 0;
- /* send a open port command */
- ATEN2011_port->open = 1;
- /* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */
- /* Setup termios */
- ATEN2011_set_termios(tty, port, &tmp_termios);
- ATEN2011_port->icount.tx = 0;
- ATEN2011_port->icount.rx = 0;
-
- dbg("usb_serial serial:%x ATEN2011_port:%x\nATEN2011_serial:%x usb_serial_port port:%x",
- (unsigned int)serial, (unsigned int)ATEN2011_port,
- (unsigned int)ATEN2011_serial, (unsigned int)port);
-
- return 0;
-
-}
-
-static int ATEN2011_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- int i;
- int chars = 0;
- struct ATENINTL_port *ATEN2011_port;
-
- /* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
-
- ATEN2011_port = usb_get_serial_port_data(port);
- if (ATEN2011_port == NULL) {
- dbg("%s", "ATEN2011_break:leaving ...........");
- return -1;
- }
-
- for (i = 0; i < NUM_URBS; ++i)
- if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS)
- chars += URB_TRANSFER_BUFFER_SIZE;
-
- dbg("%s - returns %d", __func__, chars);
- return chars;
-
-}
-
-static void ATEN2011_block_until_tx_empty(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port)
-{
- int timeout = HZ / 10;
- int wait = 30;
- int count;
-
- while (1) {
- count = ATEN2011_chars_in_buffer(tty);
-
- /* Check for Buffer status */
- if (count <= 0)
- return;
-
- /* Block the thread for a while */
- interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
- timeout);
-
- /* No activity.. count down section */
- wait--;
- if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
- return;
- } else {
- /* Reset timout value back to seconds */
- wait = 30;
- }
- }
-}
-
-static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
-{
- struct usb_serial *serial;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- int no_urbs;
- __u16 Data;
-
- dbg("%s", "ATEN2011_close:entering...");
- serial = port->serial;
-
- /* take the Adpater and port's private data */
- ATEN2011_serial = usb_get_serial_data(serial);
- ATEN2011_port = usb_get_serial_port_data(port);
- if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
- return;
-
- if (serial->dev) {
- /* flush and block(wait) until tx is empty */
- ATEN2011_block_until_tx_empty(tty, ATEN2011_port);
- }
- /* kill the ports URB's */
- for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++)
- usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]);
- /* Freeing Write URBs */
- for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) {
- kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer);
- usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]);
- }
- /* While closing port, shutdown all bulk read, write *
- * and interrupt read if they exists */
- if (serial->dev) {
- if (ATEN2011_port->write_urb) {
- dbg("%s", "Shutdown bulk write");
- usb_kill_urb(ATEN2011_port->write_urb);
- }
- if (ATEN2011_port->read_urb) {
- dbg("%s", "Shutdown bulk read");
- usb_kill_urb(ATEN2011_port->read_urb);
- }
- if ((&ATEN2011_port->control_urb)) {
- dbg("%s", "Shutdown control read");
- /* usb_kill_urb (ATEN2011_port->control_urb); */
-
- }
- }
- /* if(ATEN2011_port->ctrl_buf != NULL) */
- /* kfree(ATEN2011_port->ctrl_buf); */
- /* decrement the no.of open ports counter of an individual USB-serial adapter. */
- ATEN2011_serial->NoOfOpenPorts--;
- dbg("NoOfOpenPorts in close%d:in port%d",
- ATEN2011_serial->NoOfOpenPorts, port->number);
- if (ATEN2011_serial->NoOfOpenPorts == 0) {
- /* stop the stus polling here */
- ATEN2011_serial->status_polling_started = 0;
- if (ATEN2011_serial->interrupt_read_urb) {
- dbg("%s", "Shutdown interrupt_read_urb");
- /* ATEN2011_serial->interrupt_in_buffer=NULL; */
- /* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
- }
- }
- if (ATEN2011_port->write_urb) {
- /* if this urb had a transfer buffer already (old tx) free it */
- kfree(ATEN2011_port->write_urb->transfer_buffer);
- usb_free_urb(ATEN2011_port->write_urb);
- }
-
- /* clear the MCR & IER */
- Data = 0x00;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- Data = 0x00;
- set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- ATEN2011_port->open = 0;
- dbg("%s", "Leaving ............");
-
-}
-
-static void ATEN2011_block_until_chase_response(struct tty_struct *tty,
- struct ATENINTL_port
- *ATEN2011_port)
-{
- int timeout = 1 * HZ;
- int wait = 10;
- int count;
-
- while (1) {
- count = ATEN2011_chars_in_buffer(tty);
-
- /* Check for Buffer status */
- if (count <= 0) {
- ATEN2011_port->chaseResponsePending = 0;
- return;
- }
-
- /* Block the thread for a while */
- interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
- timeout);
- /* No activity.. count down section */
- wait--;
- if (wait == 0) {
- dbg("%s - TIMEOUT", __func__);
- return;
- } else {
- /* Reset timout value back to seconds */
- wait = 10;
- }
- }
-
-}
-
-static void ATEN2011_break(struct tty_struct *tty, int break_state)
-{
- struct usb_serial_port *port = tty->driver_data;
- unsigned char data;
- struct usb_serial *serial;
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
-
- dbg("%s", "Entering ...........");
- dbg("ATEN2011_break: Start");
-
- serial = port->serial;
-
- ATEN2011_serial = usb_get_serial_data(serial);
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
- return;
-
- /* flush and chase */
- ATEN2011_port->chaseResponsePending = 1;
-
- if (serial->dev) {
- /* flush and block until tx is empty */
- ATEN2011_block_until_chase_response(tty, ATEN2011_port);
- }
-
- if (break_state == -1)
- data = ATEN2011_port->shadowLCR | LCR_SET_BREAK;
- else
- data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK;
-
- ATEN2011_port->shadowLCR = data;
- dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
- ATEN2011_port->shadowLCR);
- set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
-
- return;
-}
-
-static int ATEN2011_write_room(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- int i;
- int room = 0;
- struct ATENINTL_port *ATEN2011_port;
-
- ATEN2011_port = usb_get_serial_port_data(port);
- if (ATEN2011_port == NULL) {
- dbg("%s", "ATEN2011_break:leaving ...........");
- return -1;
- }
-
- for (i = 0; i < NUM_URBS; ++i)
- if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS)
- room += URB_TRANSFER_BUFFER_SIZE;
-
- dbg("%s - returns %d", __func__, room);
- return room;
-
-}
-
-static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *data, int count)
-{
- int status;
- int i;
- int bytes_sent = 0;
- int transfer_size;
- int minor;
-
- struct ATENINTL_port *ATEN2011_port;
- struct usb_serial *serial;
- struct ATENINTL_serial *ATEN2011_serial;
- struct urb *urb;
- const unsigned char *current_position = data;
- unsigned char *data1;
- dbg("%s", "entering ...........");
-
- serial = port->serial;
-
- ATEN2011_port = usb_get_serial_port_data(port);
- if (ATEN2011_port == NULL) {
- dbg("%s", "ATEN2011_port is NULL");
- return -1;
- }
-
- ATEN2011_serial = usb_get_serial_data(serial);
- if (ATEN2011_serial == NULL) {
- dbg("%s", "ATEN2011_serial is NULL");
- return -1;
- }
-
- /* try to find a free urb in the list */
- urb = NULL;
-
- for (i = 0; i < NUM_URBS; ++i) {
- if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
- urb = ATEN2011_port->write_urb_pool[i];
- dbg("URB:%d", i);
- break;
- }
- }
-
- if (urb == NULL) {
- dbg("%s - no more free urbs", __func__);
- goto exit;
- }
-
- if (urb->transfer_buffer == NULL) {
- urb->transfer_buffer =
- kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
- if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __func__);
- goto exit;
- }
- }
- transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
- memcpy(urb->transfer_buffer, current_position, transfer_size);
- /* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */
-
- /* fill urb with data and submit */
- minor = port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
- && (((__u16) port->number - (__u16) (minor)) != 0)) {
- usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev,
- usb_sndbulkpipe(ATEN2011_serial->serial->dev,
- (port->
- bulk_out_endpointAddress) +
- 2), urb->transfer_buffer,
- transfer_size,
- ATEN2011_bulk_out_data_callback,
- ATEN2011_port);
- } else
-
- usb_fill_bulk_urb(urb,
- ATEN2011_serial->serial->dev,
- usb_sndbulkpipe(ATEN2011_serial->serial->dev,
- port->
- bulk_out_endpointAddress),
- urb->transfer_buffer, transfer_size,
- ATEN2011_bulk_out_data_callback,
- ATEN2011_port);
-
- data1 = urb->transfer_buffer;
- dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
- /* for(i=0;i < urb->actual_length;i++) */
- /* dbg("Data is %c ",data1[i]); */
-
- /* send it down the pipe */
- status = usb_submit_urb(urb, GFP_ATOMIC);
-
- if (status) {
- err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __func__, status);
- bytes_sent = status;
- goto exit;
- }
- bytes_sent = transfer_size;
- ATEN2011_port->icount.tx += transfer_size;
- dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
-
-exit:
- return bytes_sent;
-}
-
-static void ATEN2011_throttle(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- int status;
-
- dbg("- port %d", port->number);
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return;
-
- if (!ATEN2011_port->open) {
- dbg("%s", "port not opened");
- return;
- }
-
- dbg("%s", "Entering .......... ");
-
- if (!tty) {
- dbg("%s - no tty available", __func__);
- return;
- }
-
- /* if we are implementing XON/XOFF, send the stop character */
- if (I_IXOFF(tty)) {
- unsigned char stop_char = STOP_CHAR(tty);
- status = ATEN2011_write(tty, port, &stop_char, 1);
- if (status <= 0)
- return;
- }
-
- /* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
- ATEN2011_port->shadowMCR &= ~MCR_RTS;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
- ATEN2011_port->shadowMCR);
- if (status < 0)
- return;
- }
-
- return;
-}
-
-static void ATEN2011_unthrottle(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- int status;
- struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return;
-
- if (!ATEN2011_port->open) {
- dbg("%s - port not opened", __func__);
- return;
- }
-
- dbg("%s", "Entering .......... ");
-
- if (!tty) {
- dbg("%s - no tty available", __func__);
- return;
- }
-
- /* if we are implementing XON/XOFF, send the start character */
- if (I_IXOFF(tty)) {
- unsigned char start_char = START_CHAR(tty);
- status = ATEN2011_write(tty, port, &start_char, 1);
- if (status <= 0)
- return;
- }
-
- /* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
- ATEN2011_port->shadowMCR |= MCR_RTS;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
- ATEN2011_port->shadowMCR);
- if (status < 0)
- return;
- }
-
- return;
-}
-
-static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- unsigned int result;
- __u16 msr;
- __u16 mcr;
- /* unsigned int mcr; */
- int status = 0;
- ATEN2011_port = usb_get_serial_port_data(port);
-
- dbg("%s - port %d", __func__, port->number);
-
- if (ATEN2011_port == NULL)
- return -ENODEV;
-
- status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
- status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
- /* mcr = ATEN2011_port->shadowMCR; */
- /* COMMENT2: the Fallowing three line are commented for updating only MSR values */
- result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
- | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
- | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
- | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)
- | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)
- | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
- | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
-
- dbg("%s - 0x%04X", __func__, result);
-
- return result;
-}
-
-static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- unsigned int mcr;
- unsigned int status;
-
- dbg("%s - port %d", __func__, port->number);
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return -ENODEV;
-
- mcr = ATEN2011_port->shadowMCR;
- if (clear & TIOCM_RTS)
- mcr &= ~MCR_RTS;
- if (clear & TIOCM_DTR)
- mcr &= ~MCR_DTR;
- if (clear & TIOCM_LOOP)
- mcr &= ~MCR_LOOPBACK;
-
- if (set & TIOCM_RTS)
- mcr |= MCR_RTS;
- if (set & TIOCM_DTR)
- mcr |= MCR_DTR;
- if (set & TIOCM_LOOP)
- mcr |= MCR_LOOPBACK;
-
- ATEN2011_port->shadowMCR = mcr;
-
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
- if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed");
- return -1;
- }
-
- return 0;
-}
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- int status;
- unsigned int cflag;
- struct usb_serial *serial;
- struct ATENINTL_port *ATEN2011_port;
-
- dbg("ATEN2011_set_termios: START");
-
- serial = port->serial;
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return;
-
- if (!ATEN2011_port->open) {
- dbg("%s - port not opened", __func__);
- return;
- }
-
- dbg("%s", "setting termios - ");
-
- cflag = tty->termios->c_cflag;
-
- dbg("%s - cflag %08x iflag %08x", __func__,
- tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
- if (old_termios) {
- dbg("%s - old clfag %08x old iflag %08x", __func__,
- old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- }
-
- dbg("%s - port %d", __func__, port->number);
-
- /* change the port settings to the new ones specified */
-
- ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
-
- if (!ATEN2011_port->read_urb) {
- dbg("%s", "URB KILLED !!!!!");
- return;
- }
-
- if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
- ATEN2011_port->read_urb->dev = serial->dev;
- status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
- if (status) {
- dbg
- (" usb_submit_urb(read bulk) failed, status = %d",
- status);
- }
- }
- return;
-}
-
-static int get_lsr_info(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- unsigned int __user *value)
-{
- int count;
- unsigned int result = 0;
-
- count = ATEN2011_chars_in_buffer(tty);
- if (count == 0) {
- dbg("%s -- Empty", __func__);
- result = TIOCSER_TEMT;
- }
-
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
- return 0;
-}
-
-static int get_number_bytes_avail(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
-
- if (!tty)
- return -ENOIOCTLCMD;
-
- result = tty->read_cnt;
-
- dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result);
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
-
- return -ENOIOCTLCMD;
-}
-
-static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd,
- unsigned int __user *value)
-{
- unsigned int mcr;
- unsigned int arg;
- __u16 Data;
- int status;
- struct usb_serial_port *port;
-
- if (ATEN2011_port == NULL)
- return -1;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
-
- mcr = ATEN2011_port->shadowMCR;
-
- if (copy_from_user(&arg, value, sizeof(int)))
- return -EFAULT;
-
- switch (cmd) {
- case TIOCMBIS:
- if (arg & TIOCM_RTS)
- mcr |= MCR_RTS;
- if (arg & TIOCM_DTR)
- mcr |= MCR_RTS;
- if (arg & TIOCM_LOOP)
- mcr |= MCR_LOOPBACK;
- break;
-
- case TIOCMBIC:
- if (arg & TIOCM_RTS)
- mcr &= ~MCR_RTS;
- if (arg & TIOCM_DTR)
- mcr &= ~MCR_RTS;
- if (arg & TIOCM_LOOP)
- mcr &= ~MCR_LOOPBACK;
- break;
-
- case TIOCMSET:
- /* turn off the RTS and DTR and LOOPBACK
- * and then only turn on what was asked to */
- mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
- mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
- mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
- mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
- break;
- }
-
- ATEN2011_port->shadowMCR = mcr;
-
- Data = ATEN2011_port->shadowMCR;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed");
- return -1;
- }
-
- return 0;
-}
-
-static int get_modem_info(struct ATENINTL_port *ATEN2011_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
- __u16 msr;
- unsigned int mcr = ATEN2011_port->shadowMCR;
- int status;
-
- status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr);
- result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */
- |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */
- |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
- |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */
- |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
- |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
-
- dbg("%s -- %x", __func__, result);
-
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
- return 0;
-}
-
-static int get_serial_info(struct ATENINTL_port *ATEN2011_port,
- struct serial_struct __user *retinfo)
-{
- struct serial_struct tmp;
-
- if (ATEN2011_port == NULL)
- return -1;
-
- if (!retinfo)
- return -EFAULT;
-
- memset(&tmp, 0, sizeof(tmp));
-
- tmp.type = PORT_16550A;
- tmp.line = ATEN2011_port->port->serial->minor;
- if (tmp.line == SERIAL_TTY_NO_MINOR)
- tmp.line = 0;
- tmp.port = ATEN2011_port->port->number;
- tmp.irq = 0;
- tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
- tmp.baud_base = 9600;
- tmp.close_delay = 5 * HZ;
- tmp.closing_wait = 30 * HZ;
-
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
- return 0;
-}
-
-static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct ATENINTL_port *ATEN2011_port;
- struct async_icount cnow;
- struct async_icount cprev;
- struct serial_icounter_struct icount;
- int ATENret = 0;
- unsigned int __user *user_arg = (unsigned int __user *)arg;
-
- ATEN2011_port = usb_get_serial_port_data(port);
-
- if (ATEN2011_port == NULL)
- return -1;
-
- dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
-
- switch (cmd) {
- /* return number of bytes available */
-
- case TIOCINQ:
- dbg("%s (%d) TIOCINQ", __func__, port->number);
- return get_number_bytes_avail(tty, ATEN2011_port, user_arg);
- break;
-
- case TIOCOUTQ:
- dbg("%s (%d) TIOCOUTQ", __func__, port->number);
- return put_user(ATEN2011_chars_in_buffer(tty), user_arg);
- break;
-
- case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
- return get_lsr_info(tty, ATEN2011_port, user_arg);
- return 0;
-
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
- port->number);
- ATENret = set_modem_info(ATEN2011_port, cmd, user_arg);
- return ATENret;
-
- case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __func__, port->number);
- return get_modem_info(ATEN2011_port, user_arg);
-
- case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
- return get_serial_info(ATEN2011_port,
- (struct serial_struct __user *)arg);
-
- case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
- break;
-
- case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
- cprev = ATEN2011_port->icount;
- while (1) {
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- cnow = ATEN2011_port->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- return 0;
- }
- cprev = cnow;
- }
- /* NOTREACHED */
- break;
-
- case TIOCGICOUNT:
- cnow = ATEN2011_port->icount;
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
- port->number, icount.rx, icount.tx);
- if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
-
- default:
- break;
- }
-
- return -ENOIOCTLCMD;
-}
-
-static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor,
- __u16 *clk_sel_val)
-{
- dbg("%s - %d", __func__, baudRate);
-
- if (baudRate <= 115200) {
- *divisor = 115200 / baudRate;
- *clk_sel_val = 0x0;
- }
- if ((baudRate > 115200) && (baudRate <= 230400)) {
- *divisor = 230400 / baudRate;
- *clk_sel_val = 0x10;
- } else if ((baudRate > 230400) && (baudRate <= 403200)) {
- *divisor = 403200 / baudRate;
- *clk_sel_val = 0x20;
- } else if ((baudRate > 403200) && (baudRate <= 460800)) {
- *divisor = 460800 / baudRate;
- *clk_sel_val = 0x30;
- } else if ((baudRate > 460800) && (baudRate <= 806400)) {
- *divisor = 806400 / baudRate;
- *clk_sel_val = 0x40;
- } else if ((baudRate > 806400) && (baudRate <= 921600)) {
- *divisor = 921600 / baudRate;
- *clk_sel_val = 0x50;
- } else if ((baudRate > 921600) && (baudRate <= 1572864)) {
- *divisor = 1572864 / baudRate;
- *clk_sel_val = 0x60;
- } else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
- *divisor = 3145728 / baudRate;
- *clk_sel_val = 0x70;
- }
- return 0;
-}
-
-static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
- *ATEN2011_port, int baudRate)
-{
- int divisor = 0;
- int status;
- __u16 Data;
- unsigned char number;
- __u16 clk_sel_val;
- struct usb_serial_port *port;
- int minor;
-
- if (ATEN2011_port == NULL)
- return -1;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
-
- dbg("%s", "Entering .......... ");
-
- minor = ATEN2011_port->port->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- number = ATEN2011_port->port->number - minor;
-
- dbg("%s - port = %d, baud = %d", __func__,
- ATEN2011_port->port->number, baudRate);
- /* reset clk_uart_sel in spregOffset */
- if (baudRate > 115200) {
-#ifdef HW_flow_control
- /*
- * NOTE: need to see the pther register to modify
- * setting h/w flow control bit to 1;
- */
- /* Data = ATEN2011_port->shadowMCR; */
- Data = 0x2b;
- ATEN2011_port->shadowMCR = Data;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
- return -1;
- }
-#endif
-
- } else {
-#ifdef HW_flow_control
- /* setting h/w flow control bit to 0; */
- /* Data = ATEN2011_port->shadowMCR; */
- Data = 0xb;
- ATEN2011_port->shadowMCR = Data;
- status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
- return -1;
- }
-#endif
-
- }
-
- if (1) /* baudRate <= 115200) */ {
- clk_sel_val = 0x0;
- Data = 0x0;
- status =
- ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
- &clk_sel_val);
- status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
- if (status < 0) {
- dbg("reading spreg failed in set_serial_baud");
- return -1;
- }
- Data = (Data & 0x8f) | clk_sel_val;
- status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
- if (status < 0) {
- dbg("Writing spreg failed in set_serial_baud");
- return -1;
- }
- /* Calculate the Divisor */
-
- if (status) {
- err("%s - bad baud rate", __func__);
- dbg("%s", "bad baud rate");
- return status;
- }
- /* Enable access to divisor latch */
- Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB;
- ATEN2011_port->shadowLCR = Data;
- set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- /* Write the divisor */
- Data = (unsigned char)(divisor & 0xff);
- dbg("set_serial_baud Value to write DLL is %x", Data);
- set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
- Data = (unsigned char)((divisor & 0xff00) >> 8);
- dbg("set_serial_baud Value to write DLM is %x", Data);
- set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
- /* Disable access to divisor latch */
- Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB;
- ATEN2011_port->shadowLCR = Data;
- set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- }
-
- return status;
-}
-
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
- struct ATENINTL_port *ATEN2011_port,
- struct ktermios *old_termios)
-{
- int baud;
- unsigned cflag;
- unsigned iflag;
- __u8 lData;
- __u8 lParity;
- __u8 lStop;
- int status;
- __u16 Data;
- struct usb_serial_port *port;
- struct usb_serial *serial;
-
- if (ATEN2011_port == NULL)
- return;
-
- port = (struct usb_serial_port *)ATEN2011_port->port;
-
- serial = port->serial;
-
- dbg("%s - port %d", __func__, ATEN2011_port->port->number);
-
- if (!ATEN2011_port->open) {
- dbg("%s - port not opened", __func__);
- return;
- }
-
- if ((!tty) || (!tty->termios)) {
- dbg("%s - no tty structures", __func__);
- return;
- }
-
- dbg("%s", "Entering .......... ");
-
- lData = LCR_BITS_8;
- lStop = LCR_STOP_1;
- lParity = LCR_PAR_NONE;
-
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
-
- /* Change the number of bits */
-
- /* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */
- /* if(cflag & CSIZE) */
- {
- switch (cflag & CSIZE) {
- case CS5:
- lData = LCR_BITS_5;
- break;
-
- case CS6:
- lData = LCR_BITS_6;
- break;
-
- case CS7:
- lData = LCR_BITS_7;
- break;
- default:
- case CS8:
- lData = LCR_BITS_8;
- break;
- }
- }
- /* Change the Parity bit */
- if (cflag & PARENB) {
- if (cflag & PARODD) {
- lParity = LCR_PAR_ODD;
- dbg("%s - parity = odd", __func__);
- } else {
- lParity = LCR_PAR_EVEN;
- dbg("%s - parity = even", __func__);
- }
-
- } else {
- dbg("%s - parity = none", __func__);
- }
-
- if (cflag & CMSPAR)
- lParity = lParity | 0x20;
-
- /* Change the Stop bit */
- if (cflag & CSTOPB) {
- lStop = LCR_STOP_2;
- dbg("%s - stop bits = 2", __func__);
- } else {
- lStop = LCR_STOP_1;
- dbg("%s - stop bits = 1", __func__);
- }
-
- /* Update the LCR with the correct value */
- ATEN2011_port->shadowLCR &=
- ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
- ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
-
- dbg
- ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
- ATEN2011_port->shadowLCR);
- /* Disable Interrupts */
- Data = 0x00;
- set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- Data = 0x00;
- set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
- Data = 0xcf;
- set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
- /* Send the updated LCR value to the ATEN2011 */
- Data = ATEN2011_port->shadowLCR;
-
- set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
- Data = 0x00b;
- ATEN2011_port->shadowMCR = Data;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- Data = 0x00b;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
- /* set up the MCR register and send it to the ATEN2011 */
-
- ATEN2011_port->shadowMCR = MCR_MASTER_IE;
- if (cflag & CBAUD)
- ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-
- if (cflag & CRTSCTS)
- ATEN2011_port->shadowMCR |= (MCR_XON_ANY);
- else
- ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY);
-
- Data = ATEN2011_port->shadowMCR;
- set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
- /* Determine divisor based on baud rate */
- baud = tty_get_baud_rate(tty);
-
- if (!baud) {
- /* pick a default, any default... */
- dbg("%s", "Picked default baud...");
- baud = 9600;
- }
-
- dbg("%s - baud rate = %d", __func__, baud);
- status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud);
-
- /* Enable Interrupts */
- Data = 0x0c;
- set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
- if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
- ATEN2011_port->read_urb->dev = serial->dev;
-
- status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-
- if (status) {
- dbg
- (" usb_submit_urb(read bulk) failed, status = %d",
- status);
- }
- }
- dbg
- ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
- ATEN2011_port->shadowLCR);
-
- return;
-}
-
-static int ATEN2011_calc_num_ports(struct usb_serial *serial)
-{
-
- __u16 Data = 0x00;
- int ret = 0;
- int ATEN2011_2or4ports;
- ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER,
- &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT);
-
-/* ghostgum: here is where the problem appears to bet */
-/* Which of the following are needed? */
-/* Greg used the serial->type->num_ports=2 */
-/* But the code in the ATEN2011_open relies on serial->num_ports=2 */
- if ((Data & 0x01) == 0) {
- ATEN2011_2or4ports = 2;
- serial->type->num_ports = 2;
- serial->num_ports = 2;
- }
- /* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */
- else {
- ATEN2011_2or4ports = 4;
- serial->type->num_ports = 4;
- serial->num_ports = 4;
-
- }
-
- return ATEN2011_2or4ports;
-}
-
-static int ATEN2011_startup(struct usb_serial *serial)
-{
- struct ATENINTL_serial *ATEN2011_serial;
- struct ATENINTL_port *ATEN2011_port;
- struct usb_device *dev;
- int i, status;
- int minor;
-
- __u16 Data;
- dbg("%s", " ATEN2011_startup :entering..........");
-
- if (!serial) {
- dbg("%s", "Invalid Handler");
- return -1;
- }
-
- dev = serial->dev;
-
- dbg("%s", "Entering...");
-
- /* create our private serial structure */
- ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
- if (ATEN2011_serial == NULL) {
- err("%s - Out of memory", __func__);
- return -ENOMEM;
- }
-
- /* resetting the private structure field values to zero */
- memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial));
-
- ATEN2011_serial->serial = serial;
- /* initilize status polling flag to 0 */
- ATEN2011_serial->status_polling_started = 0;
-
- usb_set_serial_data(serial, ATEN2011_serial);
- ATEN2011_serial->ATEN2011_spectrum_2or4ports =
- ATEN2011_calc_num_ports(serial);
- /* we set up the pointers to the endpoints in the ATEN2011_open *
- * function, as the structures aren't created yet. */
-
- /* set up port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- ATEN2011_port =
- kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL);
- if (ATEN2011_port == NULL) {
- err("%s - Out of memory", __func__);
- usb_set_serial_data(serial, NULL);
- kfree(ATEN2011_serial);
- return -ENOMEM;
- }
- memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port));
-
- /*
- * Initialize all port interrupt end point to port 0
- * int endpoint. Our device has only one interrupt end point
- * comman to all port
- */
- /* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */
-
- ATEN2011_port->port = serial->port[i];
- usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
- minor = serial->port[i]->serial->minor;
- if (minor == SERIAL_TTY_NO_MINOR)
- minor = 0;
- ATEN2011_port->port_num =
- ((serial->port[i]->number - minor) + 1);
-
- if (ATEN2011_port->port_num == 1) {
- ATEN2011_port->SpRegOffset = 0x0;
- ATEN2011_port->ControlRegOffset = 0x1;
- ATEN2011_port->DcrRegOffset = 0x4;
- } else if ((ATEN2011_port->port_num == 2)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 4)) {
- ATEN2011_port->SpRegOffset = 0x8;
- ATEN2011_port->ControlRegOffset = 0x9;
- ATEN2011_port->DcrRegOffset = 0x16;
- } else if ((ATEN2011_port->port_num == 2)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 2)) {
- ATEN2011_port->SpRegOffset = 0xa;
- ATEN2011_port->ControlRegOffset = 0xb;
- ATEN2011_port->DcrRegOffset = 0x19;
- } else if ((ATEN2011_port->port_num == 3)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 4)) {
- ATEN2011_port->SpRegOffset = 0xa;
- ATEN2011_port->ControlRegOffset = 0xb;
- ATEN2011_port->DcrRegOffset = 0x19;
- } else if ((ATEN2011_port->port_num == 4)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
- 4)) {
- ATEN2011_port->SpRegOffset = 0xc;
- ATEN2011_port->ControlRegOffset = 0xd;
- ATEN2011_port->DcrRegOffset = 0x1c;
- }
-
- usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
- /* enable rx_disable bit in control register */
-
- status = get_reg_sync(serial->port[i],
- ATEN2011_port->ControlRegOffset, &Data);
- if (status < 0) {
- dbg("Reading ControlReg failed status-0x%x",
- status);
- break;
- } else
- dbg
- ("ControlReg Reading success val is %x, status%d",
- Data, status);
- Data |= 0x08; /* setting driver done bit */
- Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */
-
- /* Data |= 0x20; */ /* rx_disable bit */
- status = set_reg_sync(serial->port[i],
- ATEN2011_port->ControlRegOffset, Data);
- if (status < 0) {
- dbg
- ("Writing ControlReg failed(rx_disable) status-0x%x",
- status);
- break;
- } else
- dbg
- ("ControlReg Writing success(rx_disable) status%d",
- status);
-
- /*
- * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
- * and 0x24 in DCR3
- */
- Data = 0x01;
- status = set_reg_sync(serial->port[i],
- (__u16)(ATEN2011_port->DcrRegOffset + 0),
- Data);
- if (status < 0) {
- dbg("Writing DCR0 failed status-0x%x", status);
- break;
- } else
- dbg("DCR0 Writing success status%d", status);
-
- Data = 0x05;
- status = set_reg_sync(serial->port[i],
- (__u16)(ATEN2011_port->DcrRegOffset + 1),
- Data);
- if (status < 0) {
- dbg("Writing DCR1 failed status-0x%x", status);
- break;
- } else
- dbg("DCR1 Writing success status%d", status);
-
- Data = 0x24;
- status = set_reg_sync(serial->port[i],
- (__u16)(ATEN2011_port->DcrRegOffset + 2),
- Data);
- if (status < 0) {
- dbg("Writing DCR2 failed status-0x%x", status);
- break;
- } else
- dbg("DCR2 Writing success status%d", status);
-
- /* write values in clkstart0x0 and clkmulti 0x20 */
- Data = 0x0;
- status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
- Data);
- if (status < 0) {
- dbg
- ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
- status);
- break;
- } else
- dbg
- ("CLK_START_VALUE_REGISTER Writing success status%d",
- status);
-
- Data = 0x20;
- status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
- Data);
- if (status < 0) {
- dbg
- ("Writing CLK_MULTI_REGISTER failed status-0x%x",
- status);
- break;
- } else
- dbg("CLK_MULTI_REGISTER Writing success status%d",
- status);
-
- /* Zero Length flag register */
- if ((ATEN2011_port->port_num != 1)
- && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) {
-
- Data = 0xff;
- status = set_reg_sync(serial->port[i],
- (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
- Data);
- dbg("ZLIP offset%x",
- (__u16) (ZLP_REG1 +
- ((__u16) ATEN2011_port->port_num)));
- if (status < 0) {
- dbg
- ("Writing ZLP_REG%d failed status-0x%x",
- i + 2, status);
- break;
- } else
- dbg("ZLP_REG%d Writing success status%d",
- i + 2, status);
- } else {
- Data = 0xff;
- status = set_reg_sync(serial->port[i],
- (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
- Data);
- dbg("ZLIP offset%x",
- (__u16) (ZLP_REG1 +
- ((__u16) ATEN2011_port->port_num) -
- 0x1));
- if (status < 0) {
- dbg
- ("Writing ZLP_REG%d failed status-0x%x",
- i + 1, status);
- break;
- } else
- dbg("ZLP_REG%d Writing success status%d",
- i + 1, status);
-
- }
- ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
- ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
- }
-
- /* Zero Length flag enable */
- Data = 0x0f;
- status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
- if (status < 0) {
- dbg("Writing ZLP_REG5 failed status-0x%x", status);
- return -1;
- } else
- dbg("ZLP_REG5 Writing success status%d", status);
-
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
- return 0;
-}
-
-static void ATEN2011_release(struct usb_serial *serial)
-{
- int i;
- struct ATENINTL_port *ATEN2011_port;
-
- /* check for the ports to be closed,close the ports and disconnect */
-
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
-
- for (i = 0; i < serial->num_ports; ++i) {
- ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
- kfree(ATEN2011_port->ctrl_buf);
- usb_kill_urb(ATEN2011_port->control_urb);
- kfree(ATEN2011_port);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
-
- /* free private structure allocated for serial device */
-
- kfree(usb_get_serial_data(serial));
- usb_set_serial_data(serial, NULL);
-}
-
-static struct usb_serial_driver aten_serial_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "aten2011",
- },
- .description = DRIVER_DESC,
- .id_table = id_table,
- .open = ATEN2011_open,
- .close = ATEN2011_close,
- .write = ATEN2011_write,
- .write_room = ATEN2011_write_room,
- .chars_in_buffer = ATEN2011_chars_in_buffer,
- .throttle = ATEN2011_throttle,
- .unthrottle = ATEN2011_unthrottle,
- .calc_num_ports = ATEN2011_calc_num_ports,
-
- .ioctl = ATEN2011_ioctl,
- .set_termios = ATEN2011_set_termios,
- .break_ctl = ATEN2011_break,
- .tiocmget = ATEN2011_tiocmget,
- .tiocmset = ATEN2011_tiocmset,
- .attach = ATEN2011_startup,
- .release = ATEN2011_release,
- .read_bulk_callback = ATEN2011_bulk_in_callback,
- .read_int_callback = ATEN2011_interrupt_callback,
-};
-
-static struct usb_driver aten_driver = {
- .name = "aten2011",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
-static int __init aten_init(void)
-{
- int retval;
-
- /* Register with the usb serial */
- retval = usb_serial_register(&aten_serial_driver);
- if (retval)
- return retval;
-
- printk(KERN_INFO KBUILD_MODNAME ":"
- DRIVER_DESC " " DRIVER_VERSION "\n");
-
- /* Register with the usb */
- retval = usb_register(&aten_driver);
- if (retval)
- usb_serial_deregister(&aten_serial_driver);
-
- return retval;
-}
-
-static void __exit aten_exit(void)
-{
- usb_deregister(&aten_driver);
- usb_serial_deregister(&aten_serial_driver);
-}
-
-module_init(aten_init);
-module_exit(aten_exit);
-
-/* Module information */
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index 0ab9d15..f5416af 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -21,6 +21,7 @@
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/mutex.h>
+#include <linux/vmalloc.h>
#include "udlfb.h"
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 22f93dd..251220d 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -18,6 +18,7 @@
*/
#include <linux/kernel.h>
+#include <linux/smp_lock.h>
#include <linux/file.h>
#include <linux/tcp.h>
#include <linux/in.h>
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index a10ed27..f43ca41 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -344,7 +344,7 @@
};
static struct pci_device_id device_id_table[] __devinitdata = {
-{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]},
+{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long)&chip_info_table[0]},
{ 0, }
};
#endif
@@ -369,7 +369,7 @@
#ifdef CONFIG_PM
static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
-static int viawget_suspend(struct pci_dev *pcid, u32 state);
+static int viawget_suspend(struct pci_dev *pcid, pm_message_t state);
static int viawget_resume(struct pci_dev *pcid);
struct notifier_block device_notifier = {
notifier_call: device_notify_reboot,
@@ -3941,7 +3941,7 @@
while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
if(pci_dev_driver(pdev) == &device_driver) {
if (pci_get_drvdata(pdev))
- viawget_suspend(pdev, 3);
+ viawget_suspend(pdev, PMSG_HIBERNATE);
}
}
}
@@ -3949,7 +3949,7 @@
}
static int
-viawget_suspend(struct pci_dev *pcid, u32 state)
+viawget_suspend(struct pci_dev *pcid, pm_message_t state)
{
int power_status; // to silence the compiler
@@ -3971,7 +3971,7 @@
memset(pMgmt->abyCurrBSSID, 0, 6);
pMgmt->eCurrState = WMAC_STATE_IDLE;
pci_disable_device(pcid);
- power_status = pci_set_power_state(pcid, state);
+ power_status = pci_set_power_state(pcid, pci_choose_state(pcid, state));
spin_unlock_irq(&pDevice->lock);
return 0;
}
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index a913efc..40de151 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -257,6 +257,7 @@
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index b52cc83..f3873f6 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -23,7 +23,6 @@
#include <linux/errno.h>
#include <linux/phonedev.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 38bfdb0..2bfc41e 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -462,11 +462,18 @@
rcv->buffer = buf;
- usb_fill_bulk_urb(rcv->urb, acm->dev,
- acm->rx_endpoint,
- buf->base,
- acm->readsize,
- acm_read_bulk, rcv);
+ if (acm->is_int_ep)
+ usb_fill_int_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv, acm->bInterval);
+ else
+ usb_fill_bulk_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv);
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -550,7 +557,7 @@
static int acm_tty_open(struct tty_struct *tty, struct file *filp)
{
struct acm *acm;
- int rv = -EINVAL;
+ int rv = -ENODEV;
int i;
dbg("Entering acm_tty_open.");
@@ -677,7 +684,7 @@
/* Perform the closing process and see if we need to do the hardware
shutdown */
- if (tty_port_close_start(&acm->port, tty, filp) == 0)
+ if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
return;
acm_port_down(acm, 0);
tty_port_close_end(&acm->port, tty);
@@ -740,7 +747,7 @@
{
struct acm *acm = tty->driver_data;
if (!ACM_READY(acm))
- return -EINVAL;
+ return 0;
/*
* This is inaccurate (overcounts), but it works.
*/
@@ -1173,6 +1180,9 @@
spin_lock_init(&acm->read_lock);
mutex_init(&acm->mutex);
acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+ acm->is_int_ep = usb_endpoint_xfer_int(epread);
+ if (acm->is_int_ep)
+ acm->bInterval = epread->bInterval;
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
@@ -1227,9 +1237,14 @@
goto alloc_fail7;
}
- usb_fill_bulk_urb(snd->urb, usb_dev,
- usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
- NULL, acm->writesize, acm_write_bulk, snd);
+ if (usb_endpoint_xfer_int(epwrite))
+ usb_fill_int_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+ else
+ usb_fill_bulk_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
snd->instance = acm;
}
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1602324..c4a0ee8 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -126,6 +126,8 @@
unsigned int ctrl_caps; /* control capabilities from the class specific header */
unsigned int susp_count; /* number of suspended interfaces */
int combined_interfaces:1; /* control and data collapsed */
+ int is_int_ep:1; /* interrupt endpoints contrary to spec used */
+ u8 bInterval;
struct acm_wb *delayed_wb; /* write queued for a device about to be woken */
};
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 0fe4345..ba589d4 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/bitops.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3703789..b09a527 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -751,7 +751,7 @@
{
struct device *dev = &data->usb_dev->dev;
char *buffer;
- int rv;
+ int rv = 0;
buffer = kmalloc(0x18, GFP_KERNEL);
if (!buffer)
@@ -763,7 +763,7 @@
0, 0, buffer, 0x18, USBTMC_TIMEOUT);
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
- return rv;
+ goto err_out;
}
dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
@@ -773,7 +773,8 @@
dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
if (buffer[0] != USBTMC_STATUS_SUCCESS) {
dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
- return -EPERM;
+ rv = -EPERM;
+ goto err_out;
}
data->capabilities.interface_capabilities = buffer[4];
@@ -781,8 +782,9 @@
data->capabilities.usb488_interface_capabilities = buffer[14];
data->capabilities.usb488_device_capabilities = buffer[15];
+err_out:
kfree(buffer);
- return 0;
+ return rv;
}
#define capability_attribute(name) \
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 69280c3..ad92594 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@
depends on USB
config USB_DEVICEFS
- bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+ bool "USB device filesystem (DEPRECATED)"
depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 24dfb33..a16c538 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -80,38 +80,18 @@
int max_tx;
int i;
- /* Allocate space for the SS endpoint companion descriptor */
- ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
- GFP_KERNEL);
- if (!ep->ss_ep_comp)
- return -ENOMEM;
desc = (struct usb_ss_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
" interface %d altsetting %d ep %d: "
"using minimum values\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
- ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
- ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
- ep->ss_ep_comp->desc.bMaxBurst = 0;
- /*
- * Leave bmAttributes as zero, which will mean no streams for
- * bulk, and isoc won't support multiple bursts of packets.
- * With bursts of only one packet, and a Mult of 1, the max
- * amount of data moved per endpoint service interval is one
- * packet.
- */
- if (usb_endpoint_xfer_isoc(&ep->desc) ||
- usb_endpoint_xfer_int(&ep->desc))
- ep->ss_ep_comp->desc.wBytesPerInterval =
- ep->desc.wMaxPacketSize;
/*
* The next descriptor is for an Endpoint or Interface,
* no extra descriptors to copy into the companion structure,
* and we didn't eat up any of the buffer.
*/
- retval = 0;
- goto valid;
+ return 0;
}
memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
desc = &ep->ss_ep_comp->desc;
@@ -320,6 +300,28 @@
buffer += i;
size -= i;
+ /* Allocate space for the SS endpoint companion descriptor */
+ endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+ GFP_KERNEL);
+ if (!endpoint->ss_ep_comp)
+ return -ENOMEM;
+
+ /* Fill in some default values (may be overwritten later) */
+ endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+ endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+ endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+ /*
+ * Leave bmAttributes as zero, which will mean no streams for
+ * bulk, and isoc won't support multiple bursts of packets.
+ * With bursts of only one packet, and a Mult of 1, the max
+ * amount of data moved per endpoint service interval is one
+ * packet.
+ */
+ if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+ usb_endpoint_xfer_int(&endpoint->desc))
+ endpoint->ss_ep_comp->desc.wBytesPerInterval =
+ endpoint->desc.wMaxPacketSize;
+
if (size > 0) {
retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, num_ep, buffer,
@@ -329,6 +331,10 @@
retval = buffer - buffer0;
}
} else {
+ dev_warn(ddev, "config %d interface %d altsetting %d "
+ "endpoint 0x%X has no "
+ "SuperSpeed companion descriptor\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
retval = buffer - buffer0;
}
} else {
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 73c108d..96f1171 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -136,17 +136,19 @@
{USB_CLASS_AUDIO, "audio"},
{USB_CLASS_COMM, "comm."},
{USB_CLASS_HID, "HID"},
- {USB_CLASS_HUB, "hub"},
{USB_CLASS_PHYSICAL, "PID"},
+ {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_PRINTER, "print"},
{USB_CLASS_MASS_STORAGE, "stor."},
+ {USB_CLASS_HUB, "hub"},
{USB_CLASS_CDC_DATA, "data"},
- {USB_CLASS_APP_SPEC, "app."},
- {USB_CLASS_VENDOR_SPEC, "vend."},
- {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_CSCID, "scard"},
{USB_CLASS_CONTENT_SEC, "c-sec"},
{USB_CLASS_VIDEO, "video"},
+ {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"},
+ {USB_CLASS_MISC, "misc"},
+ {USB_CLASS_APP_SPEC, "app."},
+ {USB_CLASS_VENDOR_SPEC, "vend."},
{-1, "unk."} /* leave as last */
};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 3086090..4247ecc 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -325,21 +325,34 @@
struct async *as = urb->context;
struct dev_state *ps = as->ps;
struct siginfo sinfo;
+ struct pid *pid = NULL;
+ uid_t uid = 0;
+ uid_t euid = 0;
+ u32 secid = 0;
+ int signr;
spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
- spin_unlock(&ps->lock);
as->status = urb->status;
- if (as->signr) {
+ signr = as->signr;
+ if (signr) {
sinfo.si_signo = as->signr;
sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
- kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
- as->euid, as->secid);
+ pid = as->pid;
+ uid = as->uid;
+ euid = as->euid;
+ secid = as->secid;
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);
+ spin_unlock(&ps->lock);
+
+ if (signr)
+ kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+ euid, secid);
+
wake_up(&ps->wait);
}
@@ -582,7 +595,7 @@
if (!ps)
goto out;
- ret = -ENOENT;
+ ret = -ENODEV;
/* usbdev device-node */
if (imajor(inode) == USB_DEVICE_MAJOR)
@@ -982,7 +995,7 @@
USBDEVFS_URB_ZERO_PACKET |
USBDEVFS_URB_NO_INTERRUPT))
return -EINVAL;
- if (!uurb->buffer)
+ if (uurb->buffer_length > 0 && !uurb->buffer)
return -EINVAL;
if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
(uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
@@ -1038,11 +1051,6 @@
is_in = 0;
uurb->endpoint &= ~USB_DIR_IN;
}
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length)) {
- kfree(dr);
- return -EFAULT;
- }
snoop(&ps->dev->dev, "control urb: bRequest=%02x "
"bRrequestType=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
@@ -1062,9 +1070,6 @@
uurb->number_of_packets = 0;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "bulk urb\n");
break;
@@ -1106,27 +1111,34 @@
return -EINVAL;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "interrupt urb\n");
break;
default:
return -EINVAL;
}
+ if (uurb->buffer_length > 0 &&
+ !access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length)) {
+ kfree(isopkt);
+ kfree(dr);
+ return -EFAULT;
+ }
as = alloc_async(uurb->number_of_packets);
if (!as) {
kfree(isopkt);
kfree(dr);
return -ENOMEM;
}
- as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
- if (!as->urb->transfer_buffer) {
- kfree(isopkt);
- kfree(dr);
- free_async(as);
- return -ENOMEM;
+ if (uurb->buffer_length > 0) {
+ as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+ GFP_KERNEL);
+ if (!as->urb->transfer_buffer) {
+ kfree(isopkt);
+ kfree(dr);
+ free_async(as);
+ return -ENOMEM;
+ }
}
as->urb->dev = ps->dev;
as->urb->pipe = (uurb->type << 30) |
@@ -1169,7 +1181,7 @@
kfree(isopkt);
as->ps = ps;
as->userurb = arg;
- if (uurb->endpoint & USB_DIR_IN)
+ if (is_in && uurb->buffer_length > 0)
as->userbuffer = uurb->buffer;
else
as->userbuffer = NULL;
@@ -1179,9 +1191,9 @@
as->uid = cred->uid;
as->euid = cred->euid;
security_task_getsecid(current, &as->secid);
- if (!is_in) {
+ if (!is_in && uurb->buffer_length > 0) {
if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
- as->urb->transfer_buffer_length)) {
+ uurb->buffer_length)) {
free_async(as);
return -EFAULT;
}
@@ -1231,22 +1243,22 @@
if (as->userbuffer)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
urb->transfer_buffer_length))
- return -EFAULT;
+ goto err_out;
if (put_user(as->status, &userurb->status))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->actual_length, &userurb->actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->error_count, &userurb->error_count))
- return -EFAULT;
+ goto err_out;
if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
for (i = 0; i < urb->number_of_packets; i++) {
if (put_user(urb->iso_frame_desc[i].actual_length,
&userurb->iso_frame_desc[i].actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->iso_frame_desc[i].status,
&userurb->iso_frame_desc[i].status))
- return -EFAULT;
+ goto err_out;
}
}
@@ -1255,6 +1267,10 @@
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
+
+err_out:
+ free_async(as);
+ return -EFAULT;
}
static struct async *reap_as(struct dev_state *ps)
@@ -1305,7 +1321,8 @@
struct usbdevfs_urb32 __user *uurb)
{
__u32 uptr;
- if (get_user(kurb->type, &uurb->type) ||
+ if (!access_ok(VERIFY_READ, uurb, sizeof(*uurb)) ||
+ __get_user(kurb->type, &uurb->type) ||
__get_user(kurb->endpoint, &uurb->endpoint) ||
__get_user(kurb->status, &uurb->status) ||
__get_user(kurb->flags, &uurb->flags) ||
@@ -1520,8 +1537,9 @@
u32 udata;
uioc = compat_ptr((long)arg);
- if (get_user(ctrl.ifno, &uioc->ifno) ||
- get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+ if (!access_ok(VERIFY_READ, uioc, sizeof(*uioc)) ||
+ __get_user(ctrl.ifno, &uioc->ifno) ||
+ __get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
__get_user(udata, &uioc->data))
return -EFAULT;
ctrl.data = compat_ptr(udata);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ce3f453..95ccfa0 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -648,7 +648,7 @@
struct urb *urb;
int length;
unsigned long flags;
- char buffer[4]; /* Any root hubs with > 31 ports? */
+ char buffer[6]; /* Any root hubs with > 31 ports? */
if (unlikely(!hcd->rh_registered))
return;
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index d397ecf..ec5c67e 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -227,6 +227,10 @@
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
+ /* CLEAR_TT_BUFFER completion callback */
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
/* xHCI specific functions */
/* Called by usb_alloc_dev to alloc HC device structures */
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2af3b4f..71f86c6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -450,10 +450,10 @@
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
{
struct usb_hub *hub =
- container_of(work, struct usb_hub, tt.kevent);
+ container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
int limit = 100;
@@ -462,6 +462,7 @@
struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
+ const struct hc_driver *drv;
int status;
next = hub->tt.clear_list.next;
@@ -471,21 +472,25 @@
/* drop lock so HCD can concurrently report other TT errors */
spin_unlock_irqrestore (&hub->tt.lock, flags);
status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
- spin_lock_irqsave (&hub->tt.lock, flags);
-
if (status)
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
+
+ /* Tell the HCD, even if the operation failed */
+ drv = clear->hcd->driver;
+ if (drv->clear_tt_buffer_complete)
+ (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
kfree(clear);
+ spin_lock_irqsave(&hub->tt.lock, flags);
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* bulk transaction failed in a way that requires clearing internal state of
@@ -495,8 +500,10 @@
* It may not be possible for that hub to handle additional full (or low)
* speed transactions until that state is fully cleared out.
*/
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
{
+ struct usb_device *udev = urb->dev;
+ int pipe = urb->pipe;
struct usb_tt *tt = udev->tt;
unsigned long flags;
struct usb_tt_clear *clear;
@@ -508,7 +515,7 @@
if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
- return;
+ return -ENOMEM;
}
/* info that CLEAR_TT_BUFFER needs */
@@ -520,14 +527,19 @@
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
clear->devinfo |= 1 << 15;
-
+
+ /* info for completion callback */
+ clear->hcd = bus_to_hcd(udev->bus);
+ clear->ep = urb->ep;
+
/* tell keventd to clear state for this TT */
spin_lock_irqsave (&tt->lock, flags);
list_add_tail (&clear->clear_list, &tt->clear_list);
- schedule_work (&tt->kevent);
+ schedule_work(&tt->clear_work);
spin_unlock_irqrestore (&tt->lock, flags);
+ return 0;
}
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
/* If do_delay is false, return the number of milliseconds the caller
* needs to delay.
@@ -818,7 +830,7 @@
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.kevent);
+ cancel_work_sync(&hub->tt.clear_work);
}
/* caller has locked the hub device */
@@ -935,7 +947,7 @@
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+ INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 889c0f3..de8081f 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -188,16 +188,18 @@
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
spinlock_t lock;
struct list_head clear_list; /* of usb_tt_clear */
- struct work_struct kevent;
+ struct work_struct clear_work;
};
struct usb_tt_clear {
struct list_head clear_list;
unsigned tt;
u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
};
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
extern void usb_ep0_reinit(struct usb_device *);
#endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2bed83c..9720e699 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -806,6 +806,48 @@
return rc;
}
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+ int err;
+
+ if (dev->have_langid)
+ return 0;
+
+ if (dev->string_langid < 0)
+ return -EPIPE;
+
+ err = usb_string_sub(dev, 0, 0, tbuf);
+
+ /* If the string was reported but is malformed, default to english
+ * (0x0409) */
+ if (err == -ENODATA || (err > 0 && err < 4)) {
+ dev->string_langid = 0x0409;
+ dev->have_langid = 1;
+ dev_err(&dev->dev,
+ "string descriptor 0 malformed (err = %d), "
+ "defaulting to 0x%04x\n",
+ err, dev->string_langid);
+ return 0;
+ }
+
+ /* In case of all other errors, we assume the device is not able to
+ * deal with strings at all. Set string_langid to -1 in order to
+ * prevent any string to be retrieved from the device */
+ if (err < 0) {
+ dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+ err);
+ dev->string_langid = -1;
+ return -EPIPE;
+ }
+
+ /* always use the first langid listed */
+ dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+ dev->have_langid = 1;
+ dev_dbg(&dev->dev, "default language 0x%04x\n",
+ dev->string_langid);
+ return 0;
+}
+
/**
* usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
@@ -837,24 +879,9 @@
if (!tbuf)
return -ENOMEM;
- /* get langid for strings if it's not yet known */
- if (!dev->have_langid) {
- err = usb_string_sub(dev, 0, 0, tbuf);
- if (err < 0) {
- dev_err(&dev->dev,
- "string descriptor 0 read error: %d\n",
- err);
- } else if (err < 4) {
- dev_err(&dev->dev, "string descriptor 0 too short\n");
- } else {
- dev->string_langid = tbuf[2] | (tbuf[3] << 8);
- /* always use the first langid listed */
- dev_dbg(&dev->dev, "default language 0x%04x\n",
- dev->string_langid);
- }
-
- dev->have_langid = 1;
- }
+ err = usb_get_langid(dev, tbuf);
+ if (err < 0)
+ goto errout;
err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5d1ddf4..7f8e83a 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -286,6 +286,27 @@
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_IMX
+ boolean "Freescale IMX USB Peripheral Controller"
+ depends on ARCH_MX1
+ help
+ Freescale's IMX series include an integrated full speed
+ USB 1.1 device controller. The controller in the IMX series
+ is register-compatible.
+
+ It has Six fixed-function endpoints, as well as endpoint
+ zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "imx_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_IMX
+ tristate
+ depends on USB_GADGET_IMX
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_S3C2410
boolean "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
@@ -321,27 +342,6 @@
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
-config USB_GADGET_IMX
- boolean "Freescale IMX USB Peripheral Controller"
- depends on ARCH_MX1
- help
- Freescale's IMX series include an integrated full speed
- USB 1.1 device controller. The controller in the IMX series
- is register-compatible.
-
- It has Six fixed-function endpoints, as well as endpoint
- zero (for control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "imx_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_IMX
- tristate
- depends on USB_GADGET_IMX
- default USB_GADGET
- select USB_GADGET_SELECTED
-
config USB_GADGET_M66592
boolean "Renesas M66592 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
@@ -604,6 +604,7 @@
config USB_AUDIO
tristate "Audio Gadget (EXPERIMENTAL)"
depends on SND
+ select SND_PCM
help
Gadget Audio is compatible with USB Audio Class specification 1.0.
It will include at least one AudioControl interface, zero or more
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 826f3ad..77352cc 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -48,7 +48,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 94de7e8..9f80f4e 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -42,9 +42,9 @@
* Instead: allocate your own, using normal USB-IF procedures.
*/
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */
-#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM 0x1d6b /* Linux Foundation */
+#define AUDIO_PRODUCT_NUM 0x0101 /* Linux-USB Audio Gadget */
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d006dc6..bd102f5 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,15 +293,16 @@
/* CDC Subset */
eth_config_driver.label = "CDC Subset/SAFE";
- device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
- device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+ if (!has_rndis())
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
if (has_rndis()) {
/* RNDIS plus ECM-or-Subset */
- device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+ device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
device_desc.bNumConfigurations = 2;
}
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 6829d59..a391351 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -34,7 +34,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ce4e28..ed21e26 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,7 +139,7 @@
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
- if (mach->gpio_vbus) {
+ if (gpio_is_valid(mach->gpio_vbus)) {
int value = gpio_get_value(mach->gpio_vbus);
if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int off_level = mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, off_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int on_level = !mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, on_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@
udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
return -EOPNOTSUPP;
udc->pullup = (is_active != 0);
@@ -1802,11 +1802,13 @@
USIR0 |= tmp;
handled = 1;
}
+#ifndef CONFIG_USB_PXA25X_SMALL
if (usir1 & tmp) {
handle_ep(&dev->ep[i+8]);
USIR1 |= tmp;
handled = 1;
}
+#endif
}
}
@@ -2160,7 +2162,7 @@
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
@@ -2173,7 +2175,7 @@
} else
vbus_irq = 0;
- if (dev->mach->gpio_pullup) {
+ if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
@@ -2256,10 +2258,10 @@
#endif
free_irq(irq, dev);
err_irq1:
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (dev->mach->gpio_vbus)
+ if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
clk_put(dev->clk);
@@ -2294,11 +2296,11 @@
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
gpio_free(dev->mach->gpio_vbus);
}
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
clk_put(dev->clk);
@@ -2329,7 +2331,7 @@
struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 2b4660e..ca41b0b 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -442,6 +442,8 @@
case OID_802_3_MAC_OPTIONS:
pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+ *outbuf = cpu_to_le32(0);
+ retval = 0;
break;
/* ieee802.3 statistics OIDs (table 4-4) */
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 9a2b892..a9b452f 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -28,7 +28,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1576a05..1a920c7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -181,26 +181,27 @@
Enables support for the USB controller on the MPC52xx or
STB03xxx processor chip. If unsure, say Y.
-config USB_OHCI_HCD_PPC_OF
- bool "OHCI support for PPC USB controller on OF platform bus"
- depends on USB_OHCI_HCD && PPC_OF
- default y
- ---help---
- Enables support for the USB controller PowerPC present on the
- OpenFirmware platform bus.
-
config USB_OHCI_HCD_PPC_OF_BE
- bool "Support big endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default y
+ bool "OHCI support for OF platform bus (big endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
+ ---help---
+ Enables support for big-endian USB controllers present on the
+ OpenFirmware platform bus.
config USB_OHCI_HCD_PPC_OF_LE
- bool "Support little endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default n
+ bool "OHCI support for OF platform bus (little endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_LITTLE_ENDIAN
+ ---help---
+ Enables support for little-endian USB controllers present on the
+ OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+ bool
+ depends on USB_OHCI_HCD && PPC_OF
+ default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
bool "OHCI support for PCI-bus USB controllers"
@@ -337,10 +338,10 @@
config SUPERH_ON_CHIP_R8A66597
boolean "Enable SuperH on-chip R8A66597 USB"
- depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
help
This driver enables support for the on-chip R8A66597 in the
- SH7366 and SH7723 processors.
+ SH7366, SH7723 and SH7724 processors.
config USB_WHCI_HCD
tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index c3a778b..59d208d 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -113,6 +113,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf86809..9911749 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -325,6 +325,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2b72473..11c627c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -903,7 +903,8 @@
/* already started */
break;
case QH_STATE_IDLE:
- WARN_ON(1);
+ /* QH might be waiting for a Clear-TT-Buffer */
+ qh_completions(ehci, qh);
break;
}
break;
@@ -1003,6 +1004,8 @@
schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
+ if (qh->clearing_tt)
+ goto idle_timeout;
if (list_empty (&qh->qtd_list)) {
qh_put (qh);
break;
@@ -1030,12 +1033,14 @@
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_qh *qh;
int eptype = usb_endpoint_type(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ unsigned long flags;
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
return;
- rescan:
- spin_lock_irq(&ehci->lock);
+ spin_lock_irqsave(&ehci->lock, flags);
qh = ep->hcpriv;
/* For Bulk and Interrupt endpoints we maintain the toggle state
@@ -1044,29 +1049,24 @@
* the toggle bit in the QH.
*/
if (qh) {
+ usb_settoggle(qh->dev, epnum, is_out, 0);
if (!list_empty(&qh->qtd_list)) {
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
- } else if (qh->qh_state == QH_STATE_IDLE) {
- qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
- } else {
- /* It's not safe to write into the overlay area
- * while the QH is active. Unlink it first and
- * wait for the unlink to complete.
+ } else if (qh->qh_state == QH_STATE_LINKED) {
+
+ /* The toggle value in the QH can't be updated
+ * while the QH is active. Unlink it now;
+ * re-linking will call qh_refresh().
*/
- if (qh->qh_state == QH_STATE_LINKED) {
- if (eptype == USB_ENDPOINT_XFER_BULK) {
- unlink_async(ehci, qh);
- } else {
- intr_deschedule(ehci, qh);
- (void) qh_schedule(ehci, qh);
- }
+ if (eptype == USB_ENDPOINT_XFER_BULK) {
+ unlink_async(ehci, qh);
+ } else {
+ intr_deschedule(ehci, qh);
+ (void) qh_schedule(ehci, qh);
}
- spin_unlock_irq(&ehci->lock);
- schedule_timeout_uninterruptible(1);
- goto rescan;
}
}
- spin_unlock_irq(&ehci->lock);
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_get_frame (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index a44bb4a..89b7c70 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -61,6 +61,8 @@
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 770dd9a..1d283e1 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -105,6 +105,7 @@
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
+ ehci_reset(ehci);
retval = ehci_halt(ehci);
if (retval)
return retval;
@@ -118,7 +119,6 @@
hcd->has_tt = 1;
- ehci_reset(ehci);
ehci_port_power(ehci, 0);
return retval;
@@ -165,6 +165,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static void __init
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f3683e1..c2f1b7d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -404,6 +404,8 @@
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fbd27228..36f96da 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -79,6 +79,8 @@
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 93f7035..1dee33b 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -75,6 +75,8 @@
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3192f68..7673554 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,6 +93,22 @@
qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
qh->hw_alt_next = EHCI_LIST_END(ehci);
+ /* Except for control endpoints, we make hardware maintain data
+ * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+ * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+ * ever clear it.
+ */
+ if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+ unsigned is_out, epnum;
+
+ is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+ epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+ if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+ qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+ usb_settoggle (qh->dev, epnum, is_out, 1);
+ }
+ }
+
/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
wmb ();
qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -123,6 +139,55 @@
/*-------------------------------------------------------------------------*/
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh = ep->hcpriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+ qh->clearing_tt = 0;
+ if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+ && HC_IS_RUNNING(hcd->state))
+ qh_link_async(ehci, qh);
+ spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+ struct urb *urb, u32 token)
+{
+
+ /* If an async split transaction gets an error or is unlinked,
+ * the TT buffer may be left in an indeterminate state. We
+ * have to clear the TT buffer.
+ *
+ * Note: this routine is never called for Isochronous transfers.
+ */
+ if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+ struct usb_device *tt = urb->dev->tt->hub;
+ dev_dbg(&tt->dev,
+ "clear tt buffer port %d, a%d ep%d t%08x\n",
+ urb->dev->ttport, urb->dev->devnum,
+ usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+ if (!ehci_is_TDI(ehci)
+ || urb->dev->tt->hub !=
+ ehci_to_hcd(ehci)->self.root_hub) {
+ if (usb_hub_clear_tt_buffer(urb) == 0)
+ qh->clearing_tt = 1;
+ } else {
+
+ /* REVISIT ARC-derived cores don't clear the root
+ * hub TT buffer in this way...
+ */
+ }
+ }
+}
+
static int qtd_copy_status (
struct ehci_hcd *ehci,
struct urb *urb,
@@ -149,6 +214,14 @@
if (token & QTD_STS_BABBLE) {
/* FIXME "must" disable babbling device's port too */
status = -EOVERFLOW;
+ /* CERR nonzero + halt --> stall */
+ } else if (QTD_CERR(token)) {
+ status = -EPIPE;
+
+ /* In theory, more than one of the following bits can be set
+ * since they are sticky and the transaction is retried.
+ * Which to test first is rather arbitrary.
+ */
} else if (token & QTD_STS_MMF) {
/* fs/ls interrupt xfer missed the complete-split */
status = -EPROTO;
@@ -157,21 +230,15 @@
? -ENOSR /* hc couldn't read data */
: -ECOMM; /* hc couldn't write data */
} else if (token & QTD_STS_XACT) {
- /* timeout, bad crc, wrong PID, etc; retried */
- if (QTD_CERR (token))
- status = -EPIPE;
- else {
- ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
- urb->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out");
- status = -EPROTO;
- }
- /* CERR nonzero + no errors + halt --> stall */
- } else if (QTD_CERR (token))
- status = -EPIPE;
- else /* unknown */
+ /* timeout, bad CRC, wrong PID, etc */
+ ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+ urb->dev->devpath,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out");
status = -EPROTO;
+ } else { /* unknown */
+ status = -EPROTO;
+ }
ehci_vdbg (ehci,
"dev%d ep%d%s qtd token %08x --> status %d\n",
@@ -179,28 +246,6 @@
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
token, status);
-
- /* if async CSPLIT failed, try cleaning out the TT buffer */
- if (status != -EPIPE
- && urb->dev->tt
- && !usb_pipeint(urb->pipe)
- && ((token & QTD_STS_MMF) != 0
- || QTD_CERR(token) == 0)
- && (!ehci_is_TDI(ehci)
- || urb->dev->tt->hub !=
- ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
- struct usb_device *tt = urb->dev->tt->hub;
- dev_dbg (&tt->dev,
- "clear tt buffer port %d, a%d ep%d t%08x\n",
- urb->dev->ttport, urb->dev->devnum,
- usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
- /* REVISIT ARC-derived cores don't clear the root
- * hub TT buffer in this way...
- */
- usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
- }
}
return status;
@@ -330,12 +375,11 @@
*/
if ((token & QTD_STS_XACT) &&
QTD_CERR(token) == 0 &&
- --qh->xacterrs > 0 &&
+ ++qh->xacterrs < QH_XACTERR_MAX &&
!urb->unlinked) {
ehci_dbg(ehci,
"detected XactErr len %zu/%zu retry %d\n",
- qtd->length - QTD_LENGTH(token), qtd->length,
- QH_XACTERR_MAX - qh->xacterrs);
+ qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
/* reset the token in the qtd and the
* qh overlay (which still contains
@@ -391,9 +435,16 @@
/* qh unlinked; token in overlay may be most current */
if (state == QH_STATE_IDLE
&& cpu_to_hc32(ehci, qtd->qtd_dma)
- == qh->hw_current)
+ == qh->hw_current) {
token = hc32_to_cpu(ehci, qh->hw_token);
+ /* An unlink may leave an incomplete
+ * async transaction in the TT buffer.
+ * We have to clear it.
+ */
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
+ }
+
/* force halt for unlinked or blocked qh, so we'll
* patch the qh later and so that completions can't
* activate it while we "know" it's stopped.
@@ -419,6 +470,13 @@
&& (qtd->hw_alt_next
& EHCI_LIST_END(ehci)))
last_status = -EINPROGRESS;
+
+ /* As part of low/full-speed endpoint-halt processing
+ * we must clear the TT buffer (11.17.5).
+ */
+ if (unlikely(last_status != -EINPROGRESS &&
+ last_status != -EREMOTEIO))
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
}
/* if we're removing something not at the queue head,
@@ -435,7 +493,7 @@
last = qtd;
/* reinit the xacterr counter for the next qtd */
- qh->xacterrs = QH_XACTERR_MAX;
+ qh->xacterrs = 0;
}
/* last urb's completion might still need calling */
@@ -834,6 +892,7 @@
qh->qh_state = QH_STATE_IDLE;
qh->hw_info1 = cpu_to_hc32(ehci, info1);
qh->hw_info2 = cpu_to_hc32(ehci, info2);
+ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
qh_refresh (ehci, qh);
return qh;
}
@@ -847,6 +906,10 @@
__hc32 dma = QH_NEXT(ehci, qh->qh_dma);
struct ehci_qh *head;
+ /* Don't link a QH if there's a Clear-TT-Buffer pending */
+ if (unlikely(qh->clearing_tt))
+ return;
+
/* (re)start the async schedule? */
head = ehci->async;
timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -864,7 +927,7 @@
}
}
- /* clear halt and maybe recover from silicon quirk */
+ /* clear halt and/or toggle; and maybe recover from silicon quirk */
if (qh->qh_state == QH_STATE_IDLE)
qh_refresh (ehci, qh);
@@ -876,7 +939,8 @@
head->qh_next.qh = qh;
head->hw_next = dma;
- qh->xacterrs = QH_XACTERR_MAX;
+ qh_get(qh);
+ qh->xacterrs = 0;
qh->qh_state = QH_STATE_LINKED;
/* qtd completions reported later by interrupt */
}
@@ -1016,7 +1080,7 @@
* the HC and TT handle it when the TT has a buffer ready.
*/
if (likely (qh->qh_state == QH_STATE_IDLE))
- qh_link_async (ehci, qh_get (qh));
+ qh_link_async(ehci, qh);
done:
spin_unlock_irqrestore (&ehci->lock, flags);
if (unlikely (qh == NULL))
@@ -1051,8 +1115,6 @@
&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
qh_link_async (ehci, qh);
else {
- qh_put (qh); // refcount from async list
-
/* it's not free to turn the async schedule on/off; leave it
* active but idle for a while once it empties.
*/
@@ -1060,6 +1122,7 @@
&& ehci->async->qh_next.qh == NULL)
timer_action (ehci, TIMER_ASYNC_OFF);
}
+ qh_put(qh); /* refcount from async list */
if (next) {
ehci->reclaim = NULL;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 9d1babc..edd61ee 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -542,6 +542,7 @@
}
}
qh->qh_state = QH_STATE_LINKED;
+ qh->xacterrs = 0;
qh_get (qh);
/* update per-qh bandwidth for usbfs */
@@ -1619,11 +1620,14 @@
desc->status = -EPROTO;
/* HC need not update length with this error */
- if (!(t & EHCI_ISOC_BABBLE))
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ if (!(t & EHCI_ISOC_BABBLE)) {
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
+ }
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
} else {
/* URB was too late */
desc->status = -EXDEV;
@@ -2014,7 +2018,8 @@
desc->status = -EPROTO;
} else {
desc->status = 0;
- desc->actual_length = desc->length - SITD_LENGTH (t);
+ desc->actual_length = desc->length - SITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
}
stream->depth -= stream->interval << 3;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 90ad339..2bfff30 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -354,7 +354,9 @@
unsigned short period; /* polling interval */
unsigned short start; /* where polling starts */
#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
struct usb_device *dev; /* access to TT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
} __attribute__ ((aligned (32)));
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index bb63b68..62a226b 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -576,9 +576,7 @@
out_be16(&usb->fhci->regs->usb_event,
usb->saved_msk);
} else if (usb->port_status == FHCI_PORT_DISABLED) {
- if (fhci_ioports_check_bus_state(fhci) == 1 &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL)
+ if (fhci_ioports_check_bus_state(fhci) == 1)
fhci_device_connected_interrupt(fhci);
}
usb_er &= ~USB_E_RESET_MASK;
@@ -605,9 +603,7 @@
}
if (usb_er & USB_E_IDLE_MASK) {
- if (usb->port_status == FHCI_PORT_DISABLED &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL) {
+ if (usb->port_status == FHCI_PORT_DISABLED) {
usb_er &= ~USB_E_RESET_MASK;
fhci_device_connected_interrupt(fhci);
} else if (usb->port_status ==
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 3fa3a17..d4feebf 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -361,7 +361,7 @@
static struct platform_driver isp1760_plat_driver = {
.probe = isp1760_plat_probe,
- .remove = isp1760_plat_remove,
+ .remove = __devexit_p(isp1760_plat_remove),
.driver = {
.name = "isp1760",
},
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f3aaba3..83cbecd 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -282,6 +282,7 @@
static void ohci_omap_stop(struct usb_hcd *hcd)
{
dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+ ohci_stop(hcd);
omap_ohci_clock_power(0);
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 56976cc..e18f749 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2501c57..705e343 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -173,6 +173,7 @@
{
void *addr;
u32 temp;
+ u64 temp_64;
addr = &ir_set->irq_pending;
temp = xhci_readl(xhci, addr);
@@ -200,25 +201,15 @@
xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
addr, (unsigned int)temp);
- addr = &ir_set->erst_base[0];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_base[0] = 0x%x\n",
- addr, (unsigned int) temp);
+ addr = &ir_set->erst_base;
+ temp_64 = xhci_read_64(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n",
+ addr, temp_64);
- addr = &ir_set->erst_base[1];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_base[1] = 0x%x\n",
- addr, (unsigned int) temp);
-
- addr = &ir_set->erst_dequeue[0];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_dequeue[0] = 0x%x\n",
- addr, (unsigned int) temp);
-
- addr = &ir_set->erst_dequeue[1];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_dequeue[1] = 0x%x\n",
- addr, (unsigned int) temp);
+ addr = &ir_set->erst_dequeue;
+ temp_64 = xhci_read_64(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n",
+ addr, temp_64);
}
void xhci_print_run_regs(struct xhci_hcd *xhci)
@@ -268,8 +259,7 @@
xhci_dbg(xhci, "Link TRB:\n");
xhci_print_trb_offsets(xhci, trb);
- address = trb->link.segment_ptr[0] +
- (((u64) trb->link.segment_ptr[1]) << 32);
+ address = trb->link.segment_ptr;
xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
xhci_dbg(xhci, "Interrupter target = 0x%x\n",
@@ -282,8 +272,7 @@
(unsigned int) (trb->link.control & TRB_NO_SNOOP));
break;
case TRB_TYPE(TRB_TRANSFER):
- address = trb->trans_event.buffer[0] +
- (((u64) trb->trans_event.buffer[1]) << 32);
+ address = trb->trans_event.buffer;
/*
* FIXME: look at flags to figure out if it's an address or if
* the data is directly in the buffer field.
@@ -291,8 +280,7 @@
xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
break;
case TRB_TYPE(TRB_COMPLETION):
- address = trb->event_cmd.cmd_trb[0] +
- (((u64) trb->event_cmd.cmd_trb[1]) << 32);
+ address = trb->event_cmd.cmd_trb;
xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
xhci_dbg(xhci, "Completion status = %u\n",
(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
@@ -328,8 +316,8 @@
for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
trb = &seg->trbs[i];
xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
- (unsigned int) trb->link.segment_ptr[0],
- (unsigned int) trb->link.segment_ptr[1],
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
(unsigned int) trb->link.intr_target,
(unsigned int) trb->link.control);
addr += sizeof(*trb);
@@ -386,8 +374,8 @@
entry = &erst->entries[i];
xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
(unsigned int) addr,
- (unsigned int) entry->seg_addr[0],
- (unsigned int) entry->seg_addr[1],
+ lower_32_bits(entry->seg_addr),
+ upper_32_bits(entry->seg_addr),
(unsigned int) entry->seg_size,
(unsigned int) entry->rsvd);
addr += sizeof(*entry);
@@ -396,90 +384,147 @@
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
{
- u32 val;
+ u64 val;
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
- xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
- xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
+ lower_32_bits(val));
+ xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
+ upper_32_bits(val));
}
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+/* Print the last 32 bytes for 64-byte contexts */
+static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
+{
+ int i;
+ for (i = 0; i < 4; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx "
+ "(dma) %#08llx - rsvd64[%d]\n",
+ &ctx[4 + i], (unsigned long long)dma,
+ ctx[4 + i], i);
+ dma += 8;
+ }
+}
+
+void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
+{
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+ int i;
+
+ struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+ dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+ xhci_dbg(xhci, "Slot Context:\n");
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
+ &slot_ctx->dev_info,
+ (unsigned long long)dma, slot_ctx->dev_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
+ &slot_ctx->dev_info2,
+ (unsigned long long)dma, slot_ctx->dev_info2);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
+ &slot_ctx->tt_info,
+ (unsigned long long)dma, slot_ctx->tt_info);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
+ &slot_ctx->dev_state,
+ (unsigned long long)dma, slot_ctx->dev_state);
+ dma += field_size;
+ for (i = 0; i < 4; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
+ &slot_ctx->reserved[i], (unsigned long long)dma,
+ slot_ctx->reserved[i], i);
+ dma += field_size;
+ }
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
+}
+
+void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int last_ep)
{
int i, j;
int last_ep_ctx = 31;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
-
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
- &ctx->drop_flags, (unsigned long long)dma,
- ctx->drop_flags);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
- &ctx->add_flags, (unsigned long long)dma,
- ctx->add_flags);
- dma += field_size;
- for (i = 0; i > 6; ++i) {
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->rsvd[i], (unsigned long long)dma,
- ctx->rsvd[i], i);
- dma += field_size;
- }
-
- xhci_dbg(xhci, "Slot Context:\n");
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
- &ctx->slot.dev_info,
- (unsigned long long)dma, ctx->slot.dev_info);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
- &ctx->slot.dev_info2,
- (unsigned long long)dma, ctx->slot.dev_info2);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
- &ctx->slot.tt_info,
- (unsigned long long)dma, ctx->slot.tt_info);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
- &ctx->slot.dev_state,
- (unsigned long long)dma, ctx->slot.dev_state);
- dma += field_size;
- for (i = 0; i > 4; ++i) {
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->slot.reserved[i], (unsigned long long)dma,
- ctx->slot.reserved[i], i);
- dma += field_size;
- }
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
if (last_ep < 31)
last_ep_ctx = last_ep + 1;
for (i = 0; i < last_ep_ctx; ++i) {
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
+ dma_addr_t dma = ctx->dma +
+ ((unsigned long)ep_ctx - (unsigned long)ctx);
+
xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
- &ctx->ep[i].ep_info,
- (unsigned long long)dma, ctx->ep[i].ep_info);
+ &ep_ctx->ep_info,
+ (unsigned long long)dma, ep_ctx->ep_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
- &ctx->ep[i].ep_info2,
- (unsigned long long)dma, ctx->ep[i].ep_info2);
+ &ep_ctx->ep_info2,
+ (unsigned long long)dma, ep_ctx->ep_info2);
dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
- &ctx->ep[i].deq[0],
- (unsigned long long)dma, ctx->ep[i].deq[0]);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
- &ctx->ep[i].deq[1],
- (unsigned long long)dma, ctx->ep[i].deq[1]);
- dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
+ &ep_ctx->deq,
+ (unsigned long long)dma, ep_ctx->deq);
+ dma += 2*field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
- &ctx->ep[i].tx_info,
- (unsigned long long)dma, ctx->ep[i].tx_info);
+ &ep_ctx->tx_info,
+ (unsigned long long)dma, ep_ctx->tx_info);
dma += field_size;
for (j = 0; j < 3; ++j) {
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->ep[i].reserved[j],
+ &ep_ctx->reserved[j],
(unsigned long long)dma,
- ctx->ep[i].reserved[j], j);
+ ep_ctx->reserved[j], j);
dma += field_size;
}
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
}
}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int last_ep)
+{
+ int i;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+ struct xhci_slot_ctx *slot_ctx;
+ dma_addr_t dma = ctx->dma;
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+ if (ctx->type == XHCI_CTX_TYPE_INPUT) {
+ struct xhci_input_control_ctx *ctrl_ctx =
+ xhci_get_input_control_ctx(xhci, ctx);
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+ &ctrl_ctx->drop_flags, (unsigned long long)dma,
+ ctrl_ctx->drop_flags);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+ &ctrl_ctx->add_flags, (unsigned long long)dma,
+ ctrl_ctx->add_flags);
+ dma += field_size;
+ for (i = 0; i < 6; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
+ &ctrl_ctx->rsvd2[i], (unsigned long long)dma,
+ ctrl_ctx->rsvd2[i], i);
+ dma += field_size;
+ }
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
+ }
+
+ slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+ xhci_dbg_slot_ctx(xhci, ctx);
+ xhci_dbg_ep_ctx(xhci, ctx, last_ep);
+}
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index dba3e07..816c39c 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -103,7 +103,10 @@
u32 state;
state = xhci_readl(xhci, &xhci->op_regs->status);
- BUG_ON((state & STS_HALT) == 0);
+ if ((state & STS_HALT) == 0) {
+ xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+ return 0;
+ }
xhci_dbg(xhci, "// Reset the HC\n");
command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -226,6 +229,7 @@
static void xhci_work(struct xhci_hcd *xhci)
{
u32 temp;
+ u64 temp_64;
/*
* Clear the op reg interrupt status first,
@@ -248,9 +252,9 @@
/* FIXME this should be a delayed service routine that clears the EHB */
xhci_handle_event(xhci);
- /* Clear the event handler busy flag; the event ring should be empty. */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+ /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
/* Flush posted writes -- FIXME is this necessary? */
xhci_readl(xhci, &xhci->ir_set->irq_pending);
}
@@ -266,19 +270,34 @@
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 temp, temp2;
+ union xhci_trb *trb;
spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
/* Check if the xHC generated the interrupt, or the irq is shared */
temp = xhci_readl(xhci, &xhci->op_regs->status);
temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (temp == 0xffffffff && temp2 == 0xffffffff)
+ goto hw_died;
+
if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
spin_unlock(&xhci->lock);
return IRQ_NONE;
}
+ xhci_dbg(xhci, "op reg status = %08x\n", temp);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
if (temp & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
+hw_died:
xhci_to_hcd(xhci)->state = HC_STATE_HALT;
spin_unlock(&xhci->lock);
return -ESHUTDOWN;
@@ -295,6 +314,7 @@
{
unsigned long flags;
int temp;
+ u64 temp_64;
struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
int i, j;
@@ -311,9 +331,9 @@
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
xhci_dbg(xhci, "Command ring:\n");
xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
@@ -356,6 +376,7 @@
int xhci_run(struct usb_hcd *hcd)
{
u32 temp;
+ u64 temp_64;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
void (*doorbell)(struct xhci_hcd *) = NULL;
@@ -382,6 +403,20 @@
add_timer(&xhci->event_ring_timer);
#endif
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
xhci_dbg(xhci, "// Set the interrupt modulation register\n");
temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -406,22 +441,6 @@
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
- xhci_dbg(xhci, "Command ring memory map follows:\n");
- xhci_debug_ring(xhci, xhci->cmd_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
- xhci_dbg_cmd_ptrs(xhci);
-
- xhci_dbg(xhci, "ERST memory map follows:\n");
- xhci_dbg_erst(xhci, &xhci->erst);
- xhci_dbg(xhci, "Event ring:\n");
- xhci_debug_ring(xhci, xhci->event_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
- xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
temp = xhci_readl(xhci, &xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
@@ -601,10 +620,13 @@
goto exit;
}
if (usb_endpoint_xfer_control(&urb->ep->desc))
- ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+ /* We have a spinlock and interrupts disabled, so we must pass
+ * atomic context to this function, which may allocate memory.
+ */
+ ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
- ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else
ret = -EINVAL;
@@ -661,8 +683,12 @@
goto done;
xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+ xhci_dbg(xhci, "Endpoint ring:\n");
+ xhci_debug_ring(xhci, ep_ring);
td = (struct xhci_td *) urb->hcpriv;
ep_ring->cancels_pending++;
@@ -696,7 +722,9 @@
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
unsigned int last_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
@@ -724,31 +752,34 @@
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HC already knows the endpoint is disabled,
* or the HCD has noted it is disabled, ignore this request
*/
if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
- in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
__func__, ep);
return 0;
}
- in_ctx->drop_flags |= drop_flag;
- new_drop_flags = in_ctx->drop_flags;
+ ctrl_ctx->drop_flags |= drop_flag;
+ new_drop_flags = ctrl_ctx->drop_flags;
- in_ctx->add_flags = ~drop_flag;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags = ~drop_flag;
+ new_add_flags = ctrl_ctx->add_flags;
- last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+ last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we deleted the last one */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
@@ -778,17 +809,22 @@
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
unsigned int last_ctx;
u32 new_add_flags, new_drop_flags, new_slot_info;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, __func__);
- if (ret <= 0)
+ if (ret <= 0) {
+ /* So we won't queue a reset ep command for a root hub */
+ ep->hcpriv = NULL;
return ret;
+ }
xhci = hcd_to_xhci(hcd);
added_ctxs = xhci_get_endpoint_flag(&ep->desc);
@@ -810,12 +846,14 @@
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
- if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
__func__, ep);
return 0;
@@ -833,8 +871,8 @@
return -ENOMEM;
}
- in_ctx->add_flags |= added_ctxs;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags |= added_ctxs;
+ new_add_flags = ctrl_ctx->add_flags;
/* If xhci_endpoint_disable() was called for this endpoint, but the
* xHC hasn't been notified yet through the check_bandwidth() call,
@@ -842,14 +880,18 @@
* descriptors. We must drop and re-add this endpoint, so we leave the
* drop flags alone.
*/
- new_drop_flags = in_ctx->drop_flags;
+ new_drop_flags = ctrl_ctx->drop_flags;
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we just added one past */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
+
+ /* Store the usb_device pointer for later use */
+ ep->hcpriv = udev;
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
@@ -860,9 +902,11 @@
return 0;
}
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
{
+ struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
int i;
/* When a device's add flag and drop flag are zero, any subsequent
@@ -870,17 +914,18 @@
* untouched. Make sure we don't leave any old state in the input
* endpoint contexts.
*/
- virt_dev->in_ctx->drop_flags = 0;
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->drop_flags = 0;
+ ctrl_ctx->add_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
/* Endpoint 0 is always valid */
- virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
for (i = 1; i < 31; ++i) {
- ep_ctx = &virt_dev->in_ctx->ep[i];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
}
}
@@ -903,6 +948,8 @@
unsigned long flags;
struct xhci_hcd *xhci;
struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
if (ret <= 0)
@@ -918,16 +965,18 @@
virt_dev = xhci->devs[udev->slot_id];
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- virt_dev->in_ctx->add_flags |= SLOT_FLAG;
- virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
- virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
- virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+ ctrl_ctx->add_flags &= ~EP0_FLAG;
+ ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+ ctrl_ctx->drop_flags &= ~EP0_FLAG;
xhci_dbg(xhci, "New Input Control Context:\n");
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret < 0) {
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -982,10 +1031,10 @@
}
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
/* Free any old rings */
for (i = 1; i < 31; ++i) {
if (virt_dev->new_ep_rings[i]) {
@@ -1023,7 +1072,67 @@
virt_dev->new_ep_rings[i] = NULL;
}
}
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints. The core should have sent the control message
+ * to clear the halt condition. However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ unsigned int ep_index;
+ unsigned long flags;
+ int ret;
+ struct xhci_dequeue_state deq_state;
+ struct xhci_ring *ep_ring;
+
+ xhci = hcd_to_xhci(hcd);
+ udev = (struct usb_device *) ep->hcpriv;
+ /* Called with a root hub endpoint (or an endpoint that wasn't added
+ * with xhci_add_endpoint()
+ */
+ if (!ep->hcpriv)
+ return;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+ if (!ep_ring->stopped_td) {
+ xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+ ep->desc.bEndpointAddress);
+ return;
+ }
+
+ xhci_dbg(xhci, "Queueing reset endpoint command\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+ /*
+ * Can't change the ring dequeue pointer until it's transitioned to the
+ * stopped state, which is only upon a successful reset endpoint
+ * command. Better hope that last command worked!
+ */
+ if (!ret) {
+ xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ /* We need to move the HW's dequeue pointer past this TD,
+ * or it will attempt to resend it on the next doorbell ring.
+ */
+ xhci_find_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, ep_ring->stopped_td, &deq_state);
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ udev->slot_id,
+ ep_index, &deq_state);
+ kfree(ep_ring->stopped_td);
+ xhci_ring_cmd_db(xhci);
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (ret)
+ xhci_warn(xhci, "FIXME allocate a new ring segment\n");
}
/*
@@ -1120,7 +1229,9 @@
struct xhci_virt_device *virt_dev;
int ret = 0;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u64 temp_64;
if (!udev->slot_id) {
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -1133,10 +1244,12 @@
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
- udev->slot_id);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
@@ -1176,41 +1289,37 @@
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", virt_dev->cmd_status);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
ret = -EINVAL;
break;
}
if (ret) {
return ret;
}
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
- udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+ &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+ (unsigned long long)
+ xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
- (unsigned long long)virt_dev->out_ctx_dma);
+ (unsigned long long)virt_dev->out_ctx->dma);
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
/*
* USB core uses address 1 for the roothubs, so we add one to the
* address given back to us by the HC.
*/
- udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
/* Zero the input context control for later use */
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->drop_flags = 0;
- /* Mirror flags in the output context for future ep enable/disable */
- virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
- virt_dev->out_ctx->drop_flags = 0;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
/* XXX Meh, not sure if anyone else but choose_address uses this. */
@@ -1252,7 +1361,6 @@
/* xhci_device_control has eight fields, and also
* embeds one xhci_slot_ctx and 31 xhci_ep_ctx
*/
- BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c8a72de..e6b9a1c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -88,7 +88,7 @@
return;
prev->next = next;
if (link_trbs) {
- prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
@@ -189,6 +189,63 @@
return 0;
}
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+ int type, gfp_t flags)
+{
+ struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+ if (!ctx)
+ return NULL;
+
+ BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+ ctx->type = type;
+ ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+ if (type == XHCI_CTX_TYPE_INPUT)
+ ctx->size += CTX_SIZE(xhci->hcc_params);
+
+ ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+ memset(ctx->bytes, 0, ctx->size);
+ return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+ kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+ return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+ return (struct xhci_slot_ctx *)ctx->bytes;
+
+ return (struct xhci_slot_ctx *)
+ (ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int ep_index)
+{
+ /* increment ep index by offset of start of ep ctx array */
+ ep_index++;
+ if (ctx->type == XHCI_CTX_TYPE_INPUT)
+ ep_index++;
+
+ return (struct xhci_ep_ctx *)
+ (ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+
/* All the xhci_tds in the ring's TD list should be freed at this point */
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
{
@@ -200,8 +257,7 @@
return;
dev = xhci->devs[slot_id];
- xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
- xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
if (!dev)
return;
@@ -210,11 +266,10 @@
xhci_ring_free(xhci, dev->ep_rings[i]);
if (dev->in_ctx)
- dma_pool_free(xhci->device_pool,
- dev->in_ctx, dev->in_ctx_dma);
+ xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
- dma_pool_free(xhci->device_pool,
- dev->out_ctx, dev->out_ctx_dma);
+ xhci_free_container_ctx(xhci, dev->out_ctx);
+
kfree(xhci->devs[slot_id]);
xhci->devs[slot_id] = 0;
}
@@ -222,7 +277,6 @@
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
- dma_addr_t dma;
struct xhci_virt_device *dev;
/* Slot ID 0 is reserved */
@@ -236,23 +290,21 @@
return 0;
dev = xhci->devs[slot_id];
- /* Allocate the (output) device context that will be used in the HC */
- dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ /* Allocate the (output) device context that will be used in the HC. */
+ dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
if (!dev->out_ctx)
goto fail;
- dev->out_ctx_dma = dma;
+
xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dma);
- memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+ (unsigned long long)dev->out_ctx->dma);
/* Allocate the (input) device context for address device command */
- dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
if (!dev->in_ctx)
goto fail;
- dev->in_ctx_dma = dma;
+
xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dma);
- memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+ (unsigned long long)dev->in_ctx->dma);
/* Allocate endpoint 0 ring */
dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
@@ -261,17 +313,12 @@
init_completion(&dev->cmd_completion);
- /*
- * Point to output device context in dcbaa; skip the output control
- * context, which is eight 32 bit fields (or 32 bytes long)
- */
- xhci->dcbaa->dev_context_ptrs[2*slot_id] =
- (u32) dev->out_ctx_dma + (32);
+ /* Point to output device context in dcbaa. */
+ xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*slot_id],
- (unsigned long long)dev->out_ctx_dma);
- xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ &xhci->dcbaa->dev_context_ptrs[slot_id],
+ (unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
return 1;
fail:
@@ -285,6 +332,8 @@
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct usb_device *top_dev;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
@@ -293,27 +342,29 @@
udev->slot_id);
return -EINVAL;
}
- ep0_ctx = &dev->in_ctx->ep[0];
+ ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
+ slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
/* 2) New slot context and endpoint 0 context are valid*/
- dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+ ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
/* 3) Only the control endpoint is valid - one endpoint context */
- dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
switch (udev->speed) {
case USB_SPEED_SUPER:
- dev->in_ctx->slot.dev_info |= (u32) udev->route;
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+ slot_ctx->dev_info |= (u32) udev->route;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
break;
case USB_SPEED_HIGH:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
break;
case USB_SPEED_FULL:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
break;
case USB_SPEED_LOW:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
break;
case USB_SPEED_VARIABLE:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -327,7 +378,7 @@
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+ slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
/* Is this a LS/FS device under a HS hub? */
@@ -337,8 +388,8 @@
*/
if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
udev->tt) {
- dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
- dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+ slot_ctx->tt_info = udev->tt->hub->slot_id;
+ slot_ctx->tt_info |= udev->ttport << 8;
}
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
@@ -360,10 +411,9 @@
ep0_ctx->ep_info2 |= MAX_BURST(0);
ep0_ctx->ep_info2 |= ERROR_COUNT(3);
- ep0_ctx->deq[0] =
+ ep0_ctx->deq =
dev->ep_rings[0]->first_seg->dma;
- ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
- ep0_ctx->deq[1] = 0;
+ ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
@@ -470,25 +520,26 @@
unsigned int max_burst;
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
/* Set up the endpoint ring */
virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
if (!virt_dev->new_ep_rings[ep_index])
return -ENOMEM;
ep_ring = virt_dev->new_ep_rings[ep_index];
- ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
/* FIXME dig Mult and streams info out of ep companion desc */
- /* Allow 3 retries for everything but isoc */
+ /* Allow 3 retries for everything but isoc;
+ * error count = 0 means infinite retries.
+ */
if (!usb_endpoint_xfer_isoc(&ep->desc))
ep_ctx->ep_info2 = ERROR_COUNT(3);
else
- ep_ctx->ep_info2 = ERROR_COUNT(0);
+ ep_ctx->ep_info2 = ERROR_COUNT(1);
ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
@@ -498,7 +549,12 @@
max_packet = ep->desc.wMaxPacketSize;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
/* dig out max burst from ep companion desc */
- max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ if (!ep->ss_ep_comp) {
+ xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+ max_packet = 0;
+ } else {
+ max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ }
ep_ctx->ep_info2 |= MAX_BURST(max_packet);
break;
case USB_SPEED_HIGH:
@@ -531,18 +587,114 @@
struct xhci_ep_ctx *ep_ctx;
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
/* Don't free the endpoint ring until the set interface or configuration
* request succeeds.
*/
}
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+ int i;
+ struct device *dev = xhci_to_hcd(xhci)->self.controller;
+ int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+ xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
+
+ if (!num_sp)
+ return 0;
+
+ xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
+ if (!xhci->scratchpad)
+ goto fail_sp;
+
+ xhci->scratchpad->sp_array =
+ pci_alloc_consistent(to_pci_dev(dev),
+ num_sp * sizeof(u64),
+ &xhci->scratchpad->sp_dma);
+ if (!xhci->scratchpad->sp_array)
+ goto fail_sp2;
+
+ xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
+ if (!xhci->scratchpad->sp_buffers)
+ goto fail_sp3;
+
+ xhci->scratchpad->sp_dma_buffers =
+ kzalloc(sizeof(dma_addr_t) * num_sp, flags);
+
+ if (!xhci->scratchpad->sp_dma_buffers)
+ goto fail_sp4;
+
+ xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+ for (i = 0; i < num_sp; i++) {
+ dma_addr_t dma;
+ void *buf = pci_alloc_consistent(to_pci_dev(dev),
+ xhci->page_size, &dma);
+ if (!buf)
+ goto fail_sp5;
+
+ xhci->scratchpad->sp_array[i] = dma;
+ xhci->scratchpad->sp_buffers[i] = buf;
+ xhci->scratchpad->sp_dma_buffers[i] = dma;
+ }
+
+ return 0;
+
+ fail_sp5:
+ for (i = i - 1; i >= 0; i--) {
+ pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+ xhci->scratchpad->sp_buffers[i],
+ xhci->scratchpad->sp_dma_buffers[i]);
+ }
+ kfree(xhci->scratchpad->sp_dma_buffers);
+
+ fail_sp4:
+ kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+ pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+ xhci->scratchpad->sp_array,
+ xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+ kfree(xhci->scratchpad);
+ xhci->scratchpad = NULL;
+
+ fail_sp:
+ return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+ int num_sp;
+ int i;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ if (!xhci->scratchpad)
+ return;
+
+ num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+ for (i = 0; i < num_sp; i++) {
+ pci_free_consistent(pdev, xhci->page_size,
+ xhci->scratchpad->sp_buffers[i],
+ xhci->scratchpad->sp_dma_buffers[i]);
+ }
+ kfree(xhci->scratchpad->sp_dma_buffers);
+ kfree(xhci->scratchpad->sp_buffers);
+ pci_free_consistent(pdev, num_sp * sizeof(u64),
+ xhci->scratchpad->sp_array,
+ xhci->scratchpad->sp_dma);
+ kfree(xhci->scratchpad);
+ xhci->scratchpad = NULL;
+}
+
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
@@ -551,10 +703,8 @@
/* Free the Event Ring Segment Table and the actual Event Ring */
xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
@@ -566,8 +716,7 @@
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
- xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
- xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
@@ -586,8 +735,7 @@
xhci->device_pool = NULL;
xhci_dbg(xhci, "Freed device context pool\n");
- xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
if (xhci->dcbaa)
pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
@@ -595,6 +743,7 @@
xhci->page_size = 0;
xhci->page_shift = 0;
+ scratchpad_free(xhci);
}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
@@ -602,6 +751,7 @@
dma_addr_t dma;
struct device *dev = xhci_to_hcd(xhci)->self.controller;
unsigned int val, val2;
+ u64 val_64;
struct xhci_segment *seg;
u32 page_size;
int i;
@@ -647,8 +797,7 @@
xhci->dcbaa->dma = dma;
xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
- xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
@@ -658,11 +807,10 @@
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
SEGMENT_SIZE, 64, xhci->page_size);
+
/* See Table 46 and Note on Figure 55 */
- /* FIXME support 64-byte contexts */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
- sizeof(struct xhci_device_control),
- 64, xhci->page_size);
+ 2112, 64, xhci->page_size);
if (!xhci->segment_pool || !xhci->device_pool)
goto fail;
@@ -675,14 +823,12 @@
(unsigned long long)xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
- val = (val & ~CMD_RING_ADDR_MASK) |
- (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
- xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
- xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
- xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
- xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
val = xhci_readl(xhci, &xhci->cap_regs->db_off);
@@ -722,8 +868,7 @@
/* set ring base address and size for each segment table entry */
for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
struct xhci_erst_entry *entry = &xhci->erst.entries[val];
- entry->seg_addr[0] = seg->dma;
- entry->seg_addr[1] = 0;
+ entry->seg_addr = seg->dma;
entry->seg_size = TRBS_PER_SEGMENT;
entry->rsvd = 0;
seg = seg->next;
@@ -741,11 +886,10 @@
/* set the segment table base address */
xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
(unsigned long long)xhci->erst.erst_dma_addr);
- val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
- val &= ERST_PTR_MASK;
- val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
- xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+ val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ val_64 &= ERST_PTR_MASK;
+ val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+ xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
@@ -761,7 +905,11 @@
for (i = 0; i < MAX_HC_SLOTS; ++i)
xhci->devs[i] = 0;
+ if (scratchpad_alloc(xhci, flags))
+ goto fail;
+
return 0;
+
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
xhci_mem_cleanup(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1462709..592fe7e 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -117,6 +117,7 @@
.free_dev = xhci_free_dev,
.add_endpoint = xhci_add_endpoint,
.drop_endpoint = xhci_drop_endpoint,
+ .endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 02d8198..aa88a06 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -135,6 +135,7 @@
static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
{
union xhci_trb *next = ++(ring->dequeue);
+ unsigned long long addr;
ring->deq_updates++;
/* Update the dequeue pointer further if that was a link TRB or we're at
@@ -152,6 +153,13 @@
ring->dequeue = ring->deq_seg->trbs;
next = ring->dequeue;
}
+ addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+ if (ring == xhci->event_ring)
+ xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
+ else if (ring == xhci->cmd_ring)
+ xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
+ else
+ xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
}
/*
@@ -171,6 +179,7 @@
{
u32 chain;
union xhci_trb *next;
+ unsigned long long addr;
chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
next = ++(ring->enqueue);
@@ -204,6 +213,13 @@
ring->enqueue = ring->enq_seg->trbs;
next = ring->enqueue;
}
+ addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+ if (ring == xhci->event_ring)
+ xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
+ else if (ring == xhci->cmd_ring)
+ xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
+ else
+ xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
}
/*
@@ -237,7 +253,7 @@
void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
{
- u32 temp;
+ u64 temp;
dma_addr_t deq;
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -246,13 +262,15 @@
xhci_warn(xhci, "WARN something wrong with SW event ring "
"dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp &= ERST_PTR_MASK;
- if (!in_interrupt())
- xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
- xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
- &xhci->ir_set->erst_dequeue[0]);
+ /* Don't clear the EHB bit (which is RW1C) because
+ * there might be more events to service.
+ */
+ temp &= ~ERST_EHB;
+ xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue);
}
/* Ring the host controller doorbell after placing a command on the ring */
@@ -279,7 +297,8 @@
/* Don't ring the doorbell for this endpoint if there are pending
* cancellations because the we don't want to interrupt processing.
*/
- if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+ if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
+ && !(ep_ring->state & EP_HALTED)) {
field = xhci_readl(xhci, db_addr) & DB_MASK;
xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
/* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -316,12 +335,6 @@
return cur_seg;
}
-struct dequeue_state {
- struct xhci_segment *new_deq_seg;
- union xhci_trb *new_deq_ptr;
- int new_cycle_state;
-};
-
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
@@ -336,24 +349,30 @@
* - Finally we move the dequeue state one TRB further, toggling the cycle bit
* if we've moved it past a link TRB with the toggle cycle bit set.
*/
-static void find_new_dequeue_state(struct xhci_hcd *xhci,
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
- struct xhci_td *cur_td, struct dequeue_state *state)
+ struct xhci_td *cur_td, struct xhci_dequeue_state *state)
{
struct xhci_virt_device *dev = xhci->devs[slot_id];
struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
struct xhci_generic_trb *trb;
+ struct xhci_ep_ctx *ep_ctx;
+ dma_addr_t addr;
state->new_cycle_state = 0;
+ xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
state->new_deq_seg = find_trb_seg(cur_td->start_seg,
ep_ring->stopped_trb,
&state->new_cycle_state);
if (!state->new_deq_seg)
BUG();
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
- state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+ xhci_dbg(xhci, "Finding endpoint context\n");
+ ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+ state->new_cycle_state = 0x1 & ep_ctx->deq;
state->new_deq_ptr = cur_td->last_trb;
+ xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
state->new_deq_ptr,
&state->new_cycle_state);
@@ -367,6 +386,12 @@
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
/* Don't update the ring cycle state for the producer (us). */
+ xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+ state->new_deq_seg);
+ addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+ xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+ (unsigned long long) addr);
+ xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
ep_ring->dequeue = state->new_deq_ptr;
ep_ring->deq_seg = state->new_deq_seg;
}
@@ -416,6 +441,30 @@
unsigned int ep_index, struct xhci_segment *deq_seg,
union xhci_trb *deq_ptr, u32 cycle_state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+ struct xhci_ring *ep_ring, unsigned int slot_id,
+ unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+{
+ xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+ "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+ deq_state->new_deq_seg,
+ (unsigned long long)deq_state->new_deq_seg->dma,
+ deq_state->new_deq_ptr,
+ (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
+ deq_state->new_cycle_state);
+ queue_set_tr_deq(xhci, slot_id, ep_index,
+ deq_state->new_deq_seg,
+ deq_state->new_deq_ptr,
+ (u32) deq_state->new_cycle_state);
+ /* Stop the TD queueing code from ringing the doorbell until
+ * this command completes. The HC won't set the dequeue pointer
+ * if the ring is running, and ringing the doorbell starts the
+ * ring running.
+ */
+ ep_ring->state |= SET_DEQ_PENDING;
+ xhci_ring_cmd_db(xhci);
+}
+
/*
* When we get a command completion for a Stop Endpoint Command, we need to
* unlink any cancelled TDs from the ring. There are two ways to do that:
@@ -436,7 +485,7 @@
struct xhci_td *cur_td = 0;
struct xhci_td *last_unlinked_td;
- struct dequeue_state deq_state;
+ struct xhci_dequeue_state deq_state;
#ifdef CONFIG_USB_HCD_STAT
ktime_t stop_time = ktime_get();
#endif
@@ -464,7 +513,7 @@
* move the xHC endpoint ring dequeue pointer past this TD.
*/
if (cur_td == ep_ring->stopped_td)
- find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
&deq_state);
else
td_to_noop(xhci, ep_ring, cur_td);
@@ -480,24 +529,8 @@
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
- xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
- "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
- deq_state.new_deq_seg,
- (unsigned long long)deq_state.new_deq_seg->dma,
- deq_state.new_deq_ptr,
- (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
- deq_state.new_cycle_state);
- queue_set_tr_deq(xhci, slot_id, ep_index,
- deq_state.new_deq_seg,
- deq_state.new_deq_ptr,
- (u32) deq_state.new_cycle_state);
- /* Stop the TD queueing code from ringing the doorbell until
- * this command completes. The HC won't set the dequeue pointer
- * if the ring is running, and ringing the doorbell starts the
- * ring running.
- */
- ep_ring->state |= SET_DEQ_PENDING;
- xhci_ring_cmd_db(xhci);
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ slot_id, ep_index, &deq_state);
} else {
/* Otherwise just ring the doorbell to restart the ring */
ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -551,11 +584,15 @@
unsigned int ep_index;
struct xhci_ring *ep_ring;
struct xhci_virt_device *dev;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
dev = xhci->devs[slot_id];
ep_ring = dev->ep_rings[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+ slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
unsigned int ep_state;
@@ -569,9 +606,9 @@
case COMP_CTX_STATE:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
"to incorrect slot or ep state.\n");
- ep_state = dev->out_ctx->ep[ep_index].ep_info;
+ ep_state = ep_ctx->ep_info;
ep_state &= EP_STATE_MASK;
- slot_state = dev->out_ctx->slot.dev_state;
+ slot_state = slot_ctx->dev_state;
slot_state = GET_SLOT_STATE(slot_state);
xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
slot_state, ep_state);
@@ -593,16 +630,33 @@
* cancelling URBs, which might not be an error...
*/
} else {
- xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
- "deq[1] = 0x%x.\n",
- dev->out_ctx->ep[ep_index].deq[0],
- dev->out_ctx->ep[ep_index].deq[1]);
+ xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+ ep_ctx->deq);
}
ep_ring->state &= ~SET_DEQ_PENDING;
ring_ep_doorbell(xhci, slot_id, ep_index);
}
+static void handle_reset_ep_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event,
+ union xhci_trb *trb)
+{
+ int slot_id;
+ unsigned int ep_index;
+
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ /* This command will only fail if the endpoint wasn't halted,
+ * but we don't care.
+ */
+ xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+ (unsigned int) GET_COMP_CODE(event->status));
+
+ /* Clear our internal halted state and restart the ring */
+ xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
static void handle_cmd_completion(struct xhci_hcd *xhci,
struct xhci_event_cmd *event)
@@ -611,7 +665,7 @@
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
- cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+ cmd_dma = event->cmd_trb;
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
xhci->cmd_ring->dequeue);
/* Is the command ring deq ptr out of sync with the deq seg ptr? */
@@ -653,6 +707,9 @@
case TRB_TYPE(TRB_CMD_NOOP):
++xhci->noops_handled;
break;
+ case TRB_TYPE(TRB_RESET_EP):
+ handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+ break;
default:
/* Skip over unknown commands on the event ring */
xhci->error_bitmask |= 1 << 6;
@@ -756,7 +813,9 @@
union xhci_trb *event_trb;
struct urb *urb = 0;
int status = -EINPROGRESS;
+ struct xhci_ep_ctx *ep_ctx;
+ xhci_dbg(xhci, "In %s\n", __func__);
xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
@@ -765,17 +824,17 @@
/* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
ep_ring = xdev->ep_rings[ep_index];
- if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
return -ENODEV;
}
- event_dma = event->buffer[0];
- if (event->buffer[1] != 0)
- xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
-
+ event_dma = event->buffer;
/* This TRB should be in the TD at the head of this ring's TD list */
+ xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
if (list_empty(&ep_ring->td_list)) {
xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
TRB_TO_SLOT_ID(event->flags), ep_index);
@@ -785,11 +844,14 @@
urb = NULL;
goto cleanup;
}
+ xhci_dbg(xhci, "%s - getting list entry\n", __func__);
td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
/* Is this a TRB in the currently executing TD? */
+ xhci_dbg(xhci, "%s - looking for TD\n", __func__);
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, event_dma);
+ xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
if (!event_seg) {
/* HC is busted, give up! */
xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
@@ -798,10 +860,10 @@
event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
- (unsigned int) event->buffer[0]);
- xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
- (unsigned int) event->buffer[1]);
+ xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
+ lower_32_bits(event->buffer));
+ xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
+ upper_32_bits(event->buffer));
xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
(unsigned int) event->transfer_len);
xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
@@ -823,6 +885,7 @@
break;
case COMP_STALL:
xhci_warn(xhci, "WARN: Stalled endpoint\n");
+ ep_ring->state |= EP_HALTED;
status = -EPIPE;
break;
case COMP_TRB_ERR:
@@ -833,6 +896,10 @@
xhci_warn(xhci, "WARN: transfer error on endpoint\n");
status = -EPROTO;
break;
+ case COMP_BABBLE:
+ xhci_warn(xhci, "WARN: babble error on endpoint\n");
+ status = -EOVERFLOW;
+ break;
case COMP_DB_ERR:
xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
status = -ENOSR;
@@ -874,15 +941,26 @@
if (event_trb != ep_ring->dequeue) {
/* The event was for the status stage */
if (event_trb == td->last_trb) {
- td->urb->actual_length =
- td->urb->transfer_buffer_length;
+ if (td->urb->actual_length != 0) {
+ /* Don't overwrite a previously set error code */
+ if (status == -EINPROGRESS || status == 0)
+ /* Did we already see a short data stage? */
+ status = -EREMOTEIO;
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ }
} else {
/* Maybe the event was for the data stage? */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
/* We didn't stop on a link TRB in the middle */
td->urb->actual_length =
td->urb->transfer_buffer_length -
TRB_LEN(event->transfer_len);
+ xhci_dbg(xhci, "Waiting for status stage event\n");
+ urb = NULL;
+ goto cleanup;
+ }
}
}
} else {
@@ -929,16 +1007,20 @@
TRB_LEN(event->transfer_len));
td->urb->actual_length = 0;
}
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
+ /* Don't overwrite a previously set error code */
+ if (status == -EINPROGRESS) {
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ }
} else {
td->urb->actual_length = td->urb->transfer_buffer_length;
/* Ignore a short packet completion if the
* untransferred length was zero.
*/
- status = 0;
+ if (status == -EREMOTEIO)
+ status = 0;
}
} else {
/* Slow path - walk the list, starting from the dequeue
@@ -965,19 +1047,30 @@
TRB_LEN(event->transfer_len);
}
}
- /* The Endpoint Stop Command completion will take care of
- * any stopped TDs. A stopped TD may be restarted, so don't update the
- * ring dequeue pointer or take this TD off any lists yet.
- */
if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ /* The Endpoint Stop Command completion will take care of any
+ * stopped TDs. A stopped TD may be restarted, so don't update
+ * the ring dequeue pointer or take this TD off any lists yet.
+ */
ep_ring->stopped_td = td;
ep_ring->stopped_trb = event_trb;
} else {
- /* Update ring dequeue pointer */
- while (ep_ring->dequeue != td->last_trb)
+ if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+ /* The transfer is completed from the driver's
+ * perspective, but we need to issue a set dequeue
+ * command for this stalled endpoint to move the dequeue
+ * pointer past the TD. We can't do that here because
+ * the halt condition must be cleared first.
+ */
+ ep_ring->stopped_td = td;
+ ep_ring->stopped_trb = event_trb;
+ } else {
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
+ inc_deq(xhci, ep_ring, false);
inc_deq(xhci, ep_ring, false);
- inc_deq(xhci, ep_ring, false);
+ }
/* Clean up the endpoint's TD list */
urb = td->urb;
@@ -987,7 +1080,10 @@
list_del(&td->cancelled_td_list);
ep_ring->cancels_pending--;
}
- kfree(td);
+ /* Leave the TD around for the reset endpoint function to use */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+ kfree(td);
+ }
urb->hcpriv = NULL;
}
cleanup:
@@ -997,6 +1093,8 @@
/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
if (urb) {
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
+ urb, td->urb->actual_length, status);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
spin_lock(&xhci->lock);
@@ -1014,6 +1112,7 @@
int update_ptrs = 1;
int ret;
+ xhci_dbg(xhci, "In %s\n", __func__);
if (!xhci->event_ring || !xhci->event_ring->dequeue) {
xhci->error_bitmask |= 1 << 1;
return;
@@ -1026,18 +1125,25 @@
xhci->error_bitmask |= 1 << 2;
return;
}
+ xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
/* FIXME: Handle more event types. */
switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
case TRB_TYPE(TRB_COMPLETION):
+ xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
handle_cmd_completion(xhci, &event->event_cmd);
+ xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
break;
case TRB_TYPE(TRB_PORT_STATUS):
+ xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
handle_port_status(xhci, event);
+ xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
update_ptrs = 0;
break;
case TRB_TYPE(TRB_TRANSFER):
+ xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
ret = handle_tx_event(xhci, &event->trans_event);
+ xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
if (ret < 0)
xhci->error_bitmask |= 1 << 9;
else
@@ -1093,13 +1199,13 @@
*/
xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
return -ENOENT;
- case EP_STATE_HALTED:
case EP_STATE_ERROR:
- xhci_warn(xhci, "WARN waiting for halt or error on ep "
- "to be cleared\n");
+ xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
/* FIXME event handling code for error needs to clear it */
/* XXX not sure if this should be -ENOENT or not */
return -EINVAL;
+ case EP_STATE_HALTED:
+ xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
case EP_STATE_STOPPED:
case EP_STATE_RUNNING:
break;
@@ -1128,9 +1234,9 @@
gfp_t mem_flags)
{
int ret;
-
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
- xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+ ep_ctx->ep_info & EP_STATE_MASK,
num_trbs, mem_flags);
if (ret)
return ret;
@@ -1285,6 +1391,7 @@
/* Queue the first TRB, even if it's zero-length */
do {
u32 field = 0;
+ u32 length_field = 0;
/* Don't change the cycle bit of the first TRB until later */
if (first_trb)
@@ -1314,10 +1421,13 @@
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
(unsigned int) addr + trb_buff_len);
}
+ length_field = TRB_LEN(trb_buff_len) |
+ TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+ TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
- (u32) addr,
- (u32) ((u64) addr >> 32),
- TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
/* We always want to know if the TRB was short,
* or we won't get an event when it completes.
* (Unless we use event data TRBs, which are a
@@ -1365,7 +1475,7 @@
struct xhci_generic_trb *start_trb;
bool first_trb;
int start_cycle;
- u32 field;
+ u32 field, length_field;
int running_total, trb_buff_len, ret;
u64 addr;
@@ -1443,10 +1553,13 @@
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
}
+ length_field = TRB_LEN(trb_buff_len) |
+ TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+ TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
- (u32) addr,
- (u32) ((u64) addr >> 32),
- TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
/* We always want to know if the TRB was short,
* or we won't get an event when it completes.
* (Unless we use event data TRBs, which are a
@@ -1478,7 +1591,7 @@
struct usb_ctrlrequest *setup;
struct xhci_generic_trb *start_trb;
int start_cycle;
- u32 field;
+ u32 field, length_field;
struct xhci_td *td;
ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
@@ -1528,13 +1641,16 @@
/* If there's data, queue data TRBs */
field = 0;
+ length_field = TRB_LEN(urb->transfer_buffer_length) |
+ TD_REMAINDER(urb->transfer_buffer_length) |
+ TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
queue_trb(xhci, ep_ring, false,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
- TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+ length_field,
/* Event on short tx */
field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
}
@@ -1603,7 +1719,8 @@
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
- return queue_command(xhci, in_ctx_ptr, 0, 0,
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
}
@@ -1611,7 +1728,8 @@
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
- return queue_command(xhci, in_ctx_ptr, 0, 0,
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
}
@@ -1639,10 +1757,23 @@
u32 type = TRB_TYPE(TRB_SET_DEQ);
addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
- if (addr == 0)
+ if (addr == 0) {
xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
deq_seg, deq_ptr);
- return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+ return 0;
+ }
+ return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+ upper_32_bits(addr), 0,
trb_slot_id | trb_ep_index | type);
}
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index)
+{
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_RESET_EP);
+
+ return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8936eeb..d31d322 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -25,6 +25,7 @@
#include <linux/usb.h>
#include <linux/timer.h>
+#include <linux/kernel.h>
#include "../core/hcd.h"
/* Code sharing between pci-quirks and xhci hcd */
@@ -42,14 +43,6 @@
* xHCI register interface.
* This corresponds to the eXtensible Host Controller Interface (xHCI)
* Revision 0.95 specification
- *
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
*/
/**
@@ -96,6 +89,7 @@
#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
/* HCSPARAMS3 - hcs_params3 - bitmasks */
/* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -166,10 +160,10 @@
u32 reserved1;
u32 reserved2;
u32 dev_notification;
- u32 cmd_ring[2];
+ u64 cmd_ring;
/* rsvd: offset 0x20-2F */
u32 reserved3[4];
- u32 dcbaa_ptr[2];
+ u64 dcbaa_ptr;
u32 config_reg;
/* rsvd: offset 0x3C-3FF */
u32 reserved4[241];
@@ -254,7 +248,7 @@
#define CMD_RING_RUNNING (1 << 3)
/* bits 4:5 reserved and should be preserved */
/* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_ADDR_MASK (0xffffffc0)
+#define CMD_RING_RSVD_BITS (0x3f)
/* CONFIG - Configure Register - config_reg bitmasks */
/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
@@ -382,8 +376,8 @@
u32 irq_control;
u32 erst_size;
u32 rsvd;
- u32 erst_base[2];
- u32 erst_dequeue[2];
+ u64 erst_base;
+ u64 erst_dequeue;
};
/* irq_pending bitmasks */
@@ -453,6 +447,27 @@
/**
+ * struct xhci_container_ctx
+ * @type: Type of context. Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context. Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+ unsigned type;
+#define XHCI_CTX_TYPE_DEVICE 0x1
+#define XHCI_CTX_TYPE_INPUT 0x2
+
+ int size;
+
+ u8 *bytes;
+ dma_addr_t dma;
+};
+
+/**
* struct xhci_slot_ctx
* @dev_info: Route string, device speed, hub info, and last valid endpoint
* @dev_info2: Max exit latency for device number, root hub port number
@@ -538,7 +553,7 @@
struct xhci_ep_ctx {
u32 ep_info;
u32 ep_info2;
- u32 deq[2];
+ u64 deq;
u32 tx_info;
/* offset 0x14 - 0x1f reserved for HC internal use */
u32 reserved[3];
@@ -589,18 +604,16 @@
/**
- * struct xhci_device_control
- * Input/Output context; see section 6.2.5.
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
*
* @drop_context: set the bit of the endpoint context you want to disable
* @add_context: set the bit of the endpoint context you want to enable
*/
-struct xhci_device_control {
+struct xhci_input_control_ctx {
u32 drop_flags;
u32 add_flags;
- u32 rsvd[6];
- struct xhci_slot_ctx slot;
- struct xhci_ep_ctx ep[31];
+ u32 rsvd2[6];
};
/* drop context bitmasks */
@@ -608,7 +621,6 @@
/* add context bitmasks */
#define ADD_EP(x) (0x1 << x)
-
struct xhci_virt_device {
/*
* Commands to the hardware are passed an "input context" that
@@ -618,11 +630,10 @@
* track of input and output contexts separately because
* these commands might fail and we don't trust the hardware.
*/
- struct xhci_device_control *out_ctx;
- dma_addr_t out_ctx_dma;
+ struct xhci_container_ctx *out_ctx;
/* Used for addressing devices and configuration changes */
- struct xhci_device_control *in_ctx;
- dma_addr_t in_ctx_dma;
+ struct xhci_container_ctx *in_ctx;
+
/* FIXME when stream support is added */
struct xhci_ring *ep_rings[31];
/* Temporary storage in case the configure endpoint command fails and we
@@ -641,7 +652,7 @@
*/
struct xhci_device_context_array {
/* 64-bit device addresses; we only write 32-bit addresses */
- u32 dev_context_ptrs[2*MAX_HC_SLOTS];
+ u64 dev_context_ptrs[MAX_HC_SLOTS];
/* private xHCD pointers */
dma_addr_t dma;
};
@@ -654,7 +665,7 @@
struct xhci_stream_ctx {
/* 64-bit stream ring address, cycle state, and stream type */
- u32 stream_ring[2];
+ u64 stream_ring;
/* offset 0x14 - 0x1f reserved for HC internal use */
u32 reserved[2];
};
@@ -662,7 +673,7 @@
struct xhci_transfer_event {
/* 64-bit buffer address, or immediate data */
- u32 buffer[2];
+ u64 buffer;
u32 transfer_len;
/* This field is interpreted differently based on the type of TRB */
u32 flags;
@@ -744,7 +755,7 @@
struct xhci_link_trb {
/* 64-bit segment pointer*/
- u32 segment_ptr[2];
+ u64 segment_ptr;
u32 intr_target;
u32 control;
};
@@ -755,7 +766,7 @@
/* Command completion event TRB */
struct xhci_event_cmd {
/* Pointer to command TRB, or the value passed by the event data trb */
- u32 cmd_trb[2];
+ u64 cmd_trb;
u32 status;
u32 flags;
};
@@ -848,8 +859,8 @@
#define TRB_CONFIG_EP 12
/* Evaluate Context Command */
#define TRB_EVAL_CONTEXT 13
-/* Reset Transfer Ring Command */
-#define TRB_RESET_RING 14
+/* Reset Endpoint Command */
+#define TRB_RESET_EP 14
/* Stop Transfer Ring Command */
#define TRB_STOP_RING 15
/* Set Transfer Ring Dequeue Pointer Command */
@@ -929,6 +940,7 @@
unsigned int cancels_pending;
unsigned int state;
#define SET_DEQ_PENDING (1 << 0)
+#define EP_HALTED (1 << 1)
/* The TRB that was last reported in a stopped endpoint ring */
union xhci_trb *stopped_trb;
struct xhci_td *stopped_td;
@@ -940,9 +952,15 @@
u32 cycle_state;
};
+struct xhci_dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
struct xhci_erst_entry {
/* 64-bit event ring segment address */
- u32 seg_addr[2];
+ u64 seg_addr;
u32 seg_size;
/* Set to zero */
u32 rsvd;
@@ -957,6 +975,13 @@
unsigned int erst_size;
};
+struct xhci_scratchpad {
+ u64 *sp_array;
+ dma_addr_t sp_dma;
+ void **sp_buffers;
+ dma_addr_t *sp_dma_buffers;
+};
+
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1011,6 +1036,9 @@
struct xhci_ring *cmd_ring;
struct xhci_ring *event_ring;
struct xhci_erst erst;
+ /* Scratchpad */
+ struct xhci_scratchpad *scratchpad;
+
/* slot enabling and address device helpers */
struct completion addr_dev;
int slot_id;
@@ -1071,13 +1099,43 @@
static inline void xhci_writel(struct xhci_hcd *xhci,
const unsigned int val, __u32 __iomem *regs)
{
- if (!in_interrupt())
- xhci_dbg(xhci,
- "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
- regs, val);
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+ regs, val);
writel(val, regs);
}
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+ __u64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+ const u64 val, __u64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u32 val_lo = lower_32_bits(val);
+ u32 val_hi = upper_32_bits(val);
+
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
+ regs, (long unsigned int) val);
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
/* xHCI debugging */
void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1090,7 +1148,7 @@
void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
/* xHCI memory managment */
void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1128,6 +1186,7 @@
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
@@ -1148,10 +1207,23 @@
int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index);
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+ struct xhci_ring *ep_ring, unsigned int slot_id,
+ unsigned int ep_index, struct xhci_dequeue_state *deq_state);
/* xHCI roothub code */
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a68d91a..abe3aa6 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -220,7 +220,7 @@
config USB_TEST
tristate "USB testing driver"
- depends on USB && USB_DEVICEFS
+ depends on USB
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 3c5fe5c..90e1a8d 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <linux/usb/iowarrior.h>
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index deb95bb..d645f38 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,6 +32,7 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e0ff9cc..29092b8 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index f8d9045..0f7a30b 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1261,7 +1261,7 @@
return -ENOMEM;
}
map[n].ptr = (unsigned char *) vaddr;
- map[n].pg = virt_to_page(vaddr);
+ map[n].pg = virt_to_page((void *) vaddr);
}
return 0;
}
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 70073b1..803adcb 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,6 +12,7 @@
depends on !SUPERH
select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
+ select NOP_USB_XCEIV if MACH_OMAP3EVM
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 8a39de3..59bf949 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -5,7 +5,6 @@
#include <linux/slab.h>
#include <linux/list.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/dmapool.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 180d7da..e16ff60 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,13 +35,14 @@
#include <mach/hardware.h>
#include <mach/memory.h>
#include <mach/gpio.h>
+#include <mach/cputype.h>
#include <asm/mach-types.h>
#include "musb_core.h"
#ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV 87
+#define GPIO_nVBUS_DRV 144
#endif
#include "davinci.h"
@@ -329,7 +330,6 @@
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
- musb->is_active = 1;
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
- /* NOTE: this must complete poweron within 100 msec */
+ /* NOTE: this must complete poweron within 100 msec
+ * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+ */
davinci_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@
__raw_writel(phy_ctrl, USB_PHY_CTRL);
}
+ /* On dm355, the default-A state machine needs DRVVBUS control.
+ * If we won't be a host, there's no need to turn it on.
+ */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ if (is_host_enabled(musb)) {
+ deepsleep &= ~DRVVBUS_OVERRIDE;
+ } else {
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ }
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
/* reset the controller */
musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
@@ -437,6 +454,15 @@
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
+ /* force VBUS off */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 554a414..c7c1ca0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1326,7 +1326,6 @@
int i;
/* log core options (read using indexed model) */
- musb_ep_select(mbase, 0);
reg = musb_read_configdata(mbase);
strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
@@ -1990,7 +1989,7 @@
if (status < 0)
goto fail2;
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_MUSB_OTG
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
#endif
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f3772ca..381d648 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,7 +38,6 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/clk.h>
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 40ed50e..7a67786 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -407,7 +407,7 @@
csr |= MUSB_RXCSR_P_SENDSTALL
| MUSB_RXCSR_FLUSHFIFO
| MUSB_RXCSR_CLRDATATOG
- | MUSB_TXCSR_P_WZC_BITS;
+ | MUSB_RXCSR_P_WZC_BITS;
musb_writew(regs, MUSB_RXCSR,
csr);
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a35..cf94511 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -373,7 +373,7 @@
musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (urb->error_count)
+ if (status == 0 && urb->error_count)
status = -EXDEV;
break;
}
@@ -2235,13 +2235,30 @@
static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
+ u8 devctl;
- if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+ if (!is_host_active(musb))
return 0;
- if (is_host_active(musb) && musb->is_active) {
- WARNING("trying to suspend as %s is_active=%i\n",
- otg_state_string(musb), musb->is_active);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_SUSPEND:
+ return 0;
+ case OTG_STATE_A_WAIT_VRISE:
+ /* ID could be grounded even if there's no device
+ * on the other end of the cable. NOTE that the
+ * A_WAIT_VRISE timers are messy with MUSB...
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ break;
+ default:
+ break;
+ }
+
+ if (musb->is_active) {
+ WARNING("trying to suspend as %s while active\n",
+ otg_state_string(musb));
return -EBUSY;
} else
return 0;
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index de3b2f1..fbfd3fd 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -323,6 +323,7 @@
static inline u8 musb_read_configdata(void __iomem *mbase)
{
+ musb_writeb(mbase, MUSB_INDEX, 0);
return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
}
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 69feeec..aa884d0 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,18 +59,4 @@
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
-config USB_LANGWELL_OTG
- tristate "Intel Langwell USB OTG dual-role support"
- depends on USB && MRST
- select USB_OTG
- select USB_OTG_UTILS
- help
- Say Y here if you want to build Intel Langwell USB OTG
- transciever driver in kernel. This driver implements role
- switch between EHCI host driver and Langwell USB OTG
- client driver.
-
- To compile this driver as a module, choose M here: the
- module will be called langwell_otg.
-
endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 6d1abdd..2081678 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,7 +9,6 @@
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index 6f628d0..0000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-#include <asm/ipc_defs.h>
-#include <linux/delay.h>
-#include "../core/hcd.h"
-
-#include <linux/usb/langwell_otg.h>
-
-#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver"
-#define DRIVER_VERSION "3.0.0.32L.0002"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x8086,
- .device = 0x0811,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
- .name = (char *) driver_name,
- .id_table = pci_ids,
-
- .probe = langwell_otg_probe,
- .remove = langwell_otg_remove,
-
- .suspend = langwell_otg_suspend,
- .resume = langwell_otg_resume,
-};
-
-static const char *state_string(enum usb_otg_state state)
-{
- switch (state) {
- case OTG_STATE_A_IDLE:
- return "a_idle";
- case OTG_STATE_A_WAIT_VRISE:
- return "a_wait_vrise";
- case OTG_STATE_A_WAIT_BCON:
- return "a_wait_bcon";
- case OTG_STATE_A_HOST:
- return "a_host";
- case OTG_STATE_A_SUSPEND:
- return "a_suspend";
- case OTG_STATE_A_PERIPHERAL:
- return "a_peripheral";
- case OTG_STATE_A_WAIT_VFALL:
- return "a_wait_vfall";
- case OTG_STATE_A_VBUS_ERR:
- return "a_vbus_err";
- case OTG_STATE_B_IDLE:
- return "b_idle";
- case OTG_STATE_B_SRP_INIT:
- return "b_srp_init";
- case OTG_STATE_B_PERIPHERAL:
- return "b_peripheral";
- case OTG_STATE_B_WAIT_ACON:
- return "b_wait_acon";
- case OTG_STATE_B_HOST:
- return "b_host";
- default:
- return "UNDEFINED";
- }
-}
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
- struct langwell_otg_timer *timer;
- timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
- timer->function = function;
- timer->expires = expires;
- timer->data = data;
- return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
- *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
- *b_bus_suspend_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver()
-{
- otg_dbg("transceiver driver is notified\n");
- queue_work(the_transceiver->qwork, &the_transceiver->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host)
-{
- otg->host = host;
-
- return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget)
-{
- otg->gadget = gadget;
-
- return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
- unsigned mA)
-{
- return 0;
-}
-
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
-static void langwell_otg_drv_vbus(int on)
-{
- struct ipc_pmic_reg_data pmic_data = {0};
- struct ipc_pmic_reg_data battery_data;
-
- /* Check if battery is attached or not */
- battery_data.pmic_reg_data[0].register_address = 0xd2;
- battery_data.ioc = 0;
- battery_data.num_entries = 1;
- if (ipc_pmic_register_read(&battery_data)) {
- otg_dbg("Failed to read PMIC register 0xd2.\n");
- return;
- }
-
- if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
- otg_dbg("no battery attached\n");
- return;
- }
-
- /* Workaround for battery attachment issue */
- if (battery_data.pmic_reg_data[0].value == 0x34) {
- otg_dbg("battery \n");
- return;
- }
-
- otg_dbg("battery attached\n");
-
- pmic_data.ioc = 0;
- pmic_data.pmic_reg_data[0].register_address = 0xD4;
- pmic_data.num_entries = 1;
- if (on)
- pmic_data.pmic_reg_data[0].value = 0x20;
- else
- pmic_data.pmic_reg_data[0].value = 0xc0;
-
- if (ipc_pmic_register_write(&pmic_data, TRUE))
- otg_dbg("Failed to write PMIC.\n");
-
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-
- u32 val;
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
- the_transceiver->regs + CI_OTGSC);
-
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
- u32 val;
-
- otg_dbg("Start SRP ->\n");
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
- the_transceiver->regs + CI_OTGSC);
-
- /* Check if the data plus is finished or not */
- msleep(8);
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (val & (OTGSC_HADP | OTGSC_DP))
- otg_dbg("DataLine SRP Error\n");
-
- /* FIXME: VBus SRP */
-
- return 0;
-}
-
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
- struct usb_hcd *hcd;
- int err;
-
- otg_dbg("loc_sof -> %d\n", on);
-
- hcd = bus_to_hcd(the_transceiver->otg.host);
- if (on)
- err = hcd->driver->bus_resume(hcd);
- else
- err = hcd->driver->bus_suspend(hcd);
-
- if (err)
- otg_dbg("Failed to resume/suspend bus - %d\n", err);
-}
-
-static void langwell_otg_phy_low_power(int on)
-{
- u32 val;
-
- otg_dbg("phy low power mode-> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_HOSTPC1);
- if (on)
- writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
- else
- writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
- u32 val;
-
- otg_dbg("interrupt -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on) {
- val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- } else {
- val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
- u32 val;
-
- otg_dbg("HAAR -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
- u32 val;
-
- otg_dbg("HABA -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
- u32 val;
-
- int delay_time = TB_SE0_SRP * 10; /* step is 100us */
-
- otg_dbg("check_se0_srp -> \n");
-
- do {
- udelay(100);
- if (!delay_time--)
- break;
- val = readl(the_transceiver->regs + CI_PORTSC1);
- val &= PORTSC_LS;
- } while (!val);
-
- otg_dbg("check_se0_srp <- \n");
- return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
- *(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
- switch (indicator) {
- case 2:
- case 4:
- case 6:
- case 7:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
- indicator);
- break;
- case 3:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
- indicator);
- break;
- default:
- printk(KERN_ERR "Do not have this kind of NSF\n");
- break;
- }
-}
-
-/* Initialize timers */
-static void langwell_otg_init_timers(struct otg_hsm *hsm)
-{
- /* HSM used timers */
- a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
- (unsigned long)&hsm->a_wait_vrise_tmout);
- a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
- (unsigned long)&hsm->a_wait_bcon_tmout);
- a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
- (unsigned long)&hsm->a_aidl_bdis_tmout);
- b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
- (unsigned long)&hsm->b_ase0_brst_tmout);
- b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
- (unsigned long)&hsm->b_se0_srp);
- b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
- (unsigned long)&hsm->b_srp_res_tmout);
- b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
- (unsigned long)&hsm->b_bus_suspend_tmout);
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
- kfree(a_wait_vrise_tmr);
- kfree(a_wait_bcon_tmr);
- kfree(a_aidl_bdis_tmr);
- kfree(b_ase0_brst_tmr);
- kfree(b_se0_srp_tmr);
- kfree(b_srp_res_tmr);
- kfree(b_bus_suspend_tmr);
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer;
- u32 val32;
-
- /* Check if the timer is already in the active list,
- * if so update timer count
- */
- list_for_each_entry(tmp_timer, &active_timers, list)
- if (tmp_timer == timer) {
- timer->count = timer->expires;
- return;
- }
- timer->count = timer->expires;
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-
- list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- u32 val32;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
- if (tmp_timer == timer)
- list_del(&timer->list);
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- int expired = 0;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
- tmp_timer->count--;
- /* check if timer expires */
- if (!tmp_timer->count) {
- list_del(&tmp_timer->list);
- tmp_timer->function(tmp_timer->data);
- expired = 1;
- }
- }
-
- if (list_empty(&active_timers)) {
- otg_dbg("tick timer: disable 1ms int\n");
- *int_sts = *int_sts & ~OTGSC_1MSE;
- }
- return expired;
-}
-
-static void reset_otg(void)
-{
- u32 val;
- int delay_time = 1000;
-
- otg_dbg("reseting OTG controller ...\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
- do {
- udelay(100);
- if (!delay_time--)
- otg_dbg("reset timeout\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- val &= USBCMD_RST;
- } while (val != 0);
- otg_dbg("reset done.\n");
-}
-
-static void set_host_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_HOST;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
- struct langwell_otg *langwell = the_transceiver;
- u32 val32;
-
- /* read OTGSC after reset */
- val32 = readl(langwell->regs + CI_OTGSC);
- otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
-
- /* set init state */
- if (val32 & OTGSC_ID) {
- langwell->hsm.id = 1;
- langwell->otg.default_a = 0;
- set_client_mode();
- langwell->otg.state = OTG_STATE_B_IDLE;
- langwell_otg_drv_vbus(0);
- } else {
- langwell->hsm.id = 0;
- langwell->otg.default_a = 1;
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
-
- /* set session indicator */
- if (val32 & OTGSC_BSE)
- langwell->hsm.b_sess_end = 1;
- if (val32 & OTGSC_BSV)
- langwell->hsm.b_sess_vld = 1;
- if (val32 & OTGSC_ASV)
- langwell->hsm.a_sess_vld = 1;
- if (val32 & OTGSC_AVV)
- langwell->hsm.a_vbus_vld = 1;
-
- /* defautly power the bus */
- langwell->hsm.a_bus_req = 1;
- langwell->hsm.a_bus_drop = 0;
- /* defautly don't request bus as B device */
- langwell->hsm.b_bus_req = 0;
- /* no system error */
- langwell->hsm.a_clr_err = 0;
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
- void __iomem *reg_base = _dev;
- u32 val;
- u32 int_mask = 0;
-
- val = readl(reg_base + CI_USBMODE);
- if ((val & USBMODE_CM) != USBMODE_DEVICE)
- return IRQ_NONE;
-
- val = readl(reg_base + CI_USBSTS);
- int_mask = val & INTR_DUMMY_MASK;
-
- if (int_mask == 0)
- return IRQ_NONE;
-
- /* clear hsm.b_conn here since host driver can't detect it
- * otg_dummy_irq called means B-disconnect happened.
- */
- if (the_transceiver->hsm.b_conn) {
- the_transceiver->hsm.b_conn = 0;
- if (spin_trylock(&the_transceiver->wq_lock)) {
- queue_work(the_transceiver->qwork,
- &the_transceiver->work);
- spin_unlock(&the_transceiver->wq_lock);
- }
- }
- /* Clear interrupts */
- writel(int_mask, reg_base + CI_USBSTS);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
- struct langwell_otg *langwell = _dev;
- u32 int_sts, int_en;
- u32 int_mask = 0;
- int flag = 0;
-
- int_sts = readl(langwell->regs + CI_OTGSC);
- int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
- int_mask = int_sts & int_en;
- if (int_mask == 0)
- return IRQ_NONE;
-
- if (int_mask & OTGSC_IDIS) {
- otg_dbg("%s: id change int\n", __func__);
- langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_DPIS) {
- otg_dbg("%s: data pulse int\n", __func__);
- langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSEIS) {
- otg_dbg("%s: b session end int\n", __func__);
- langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSVIS) {
- otg_dbg("%s: b session valid int\n", __func__);
- langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_ASVIS) {
- otg_dbg("%s: a session valid int\n", __func__);
- langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_AVVIS) {
- otg_dbg("%s: a vbus valid int\n", __func__);
- langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
- flag = 1;
- }
-
- if (int_mask & OTGSC_1MSS) {
- /* need to schedule otg_work if any timer is expired */
- if (langwell_otg_tick_timer(&int_sts))
- flag = 1;
- }
-
- writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
- langwell->regs + CI_OTGSC);
- if (flag)
- queue_work(langwell->qwork, &langwell->work);
-
- return IRQ_HANDLED;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
- struct langwell_otg *langwell = container_of(work,
- struct langwell_otg, work);
- int retval;
-
- otg_dbg("%s: old state = %s\n", __func__,
- state_string(langwell->otg.state));
-
- switch (langwell->otg.state) {
- case OTG_STATE_UNDEFINED:
- case OTG_STATE_B_IDLE:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_chrg_vbus(0);
- langwell_otg_drv_vbus(0);
-
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_srp_res_tmout) {
- langwell->hsm.b_srp_res_tmout = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_nsf_msg(6);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->hsm.b_sess_end = 0;
- langwell->hsm.a_bus_suspend = 0;
-
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
-
- } else if (langwell->hsm.b_bus_req &&
- (langwell->hsm.b_sess_end)) {
- /* workaround for b_se0_srp detection */
- retval = langwell_otg_check_se0_srp(0);
- if (retval) {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("LS is not SE0, try again later\n");
- } else {
- /* Start SRP */
- langwell_otg_start_srp(&langwell->otg);
- langwell_otg_add_timer(b_srp_res_tmr);
- }
- }
- break;
- case OTG_STATE_B_SRP_INIT:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
- }
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
- && langwell->hsm.a_bus_suspend) {
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell_otg_HAAR(1);
- langwell->hsm.a_conn = 0;
-
- if (langwell->host_ops) {
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- langwell->otg.state = OTG_STATE_B_WAIT_ACON;
- } else
- otg_dbg("host driver not loaded.\n");
-
- langwell->hsm.a_bus_resume = 0;
- langwell->hsm.b_ase0_brst_tmout = 0;
- langwell_otg_add_timer(b_ase0_brst_tmr);
- }
- break;
-
- case OTG_STATE_B_WAIT_ACON:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- langwell_otg_HAAR(0);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_conn) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell->otg.state = OTG_STATE_B_HOST;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_resume ||
- langwell->hsm.b_ase0_brst_tmout) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell_otg_nsf_msg(7);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
- langwell->hsm.b_bus_req = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_B_HOST:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if ((!langwell->hsm.b_bus_req) ||
- (!langwell->hsm.a_conn)) {
- langwell->hsm.b_bus_req = 0;
- langwell_otg_loc_sof(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_A_IDLE:
- langwell->otg.default_a = 1;
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_sess_vld) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_srp_det = 1;
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_bus_drop &&
- (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VRISE:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.b_bus_req = 0;
- langwell->otg.default_a = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.a_wait_vrise_tmout) {
- if (langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->probe(
- langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else {
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- }
- break;
- case OTG_STATE_A_WAIT_BCON:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop ||
- (langwell->hsm.a_wait_bcon_tmout &&
- !langwell->hsm.a_bus_req)) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_conn) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->hsm.a_suspend_req = 0;
- langwell->otg.state = OTG_STATE_A_HOST;
- if (!langwell->hsm.a_bus_req &&
- langwell->hsm.a_set_b_hnp_en) {
- /* It is not safe enough to do a fast
- * transistion from A_WAIT_BCON to
- * A_SUSPEND */
- msleep(10000);
- if (langwell->hsm.a_bus_req)
- break;
-
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED,
- driver_name, langwell->regs) != 0) {
- otg_dbg("request interrupt %d fail\n",
- langwell->pdev->irq);
- }
-
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
-
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.a_bus_req &&
- !langwell->hsm.a_set_b_hnp_en) {
- struct pci_dev *pdev = langwell->pdev;
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- }
- }
- break;
- case OTG_STATE_A_HOST:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_drop ||
- (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_set_b_hnp_en
- && !langwell->hsm.a_bus_req) {
- /* Set HABA to enable hardware assistance to signal
- * A-connect after receiver B-disconnect. Hardware
- * will then set client mode and enable URE, SLE and
- * PCE after the assistance. otg_dummy_irq is used to
- * clean these ints when client driver is not resumed.
- */
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED, driver_name,
- langwell->regs) != 0) {
- otg_dbg("request interrupt %d failed\n",
- langwell->pdev->irq);
- }
-
- /* set HABA */
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_SUSPEND:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req ||
- langwell->hsm.b_bus_resume) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->hsm.a_suspend_req = 0;
- langwell_otg_loc_sof(1);
- langwell->otg.state = OTG_STATE_A_HOST;
- } else if (langwell->hsm.a_aidl_bdis_tmout ||
- langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.b_conn &&
- langwell->hsm.a_set_b_hnp_en) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.b_bus_suspend = 0;
- langwell->hsm.b_bus_suspend_vld = 0;
- langwell->hsm.b_bus_suspend_tmout = 0;
-
- /* msleep(200); */
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell_otg_add_timer(b_bus_suspend_tmr);
- langwell->otg.state = OTG_STATE_A_PERIPHERAL;
- break;
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_bus_suspend) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
-
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.b_bus_suspend_tmout) {
- u32 val;
- val = readl(langwell->regs + CI_PORTSC1);
- if (!(val & PORTSC_SUSP))
- break;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_VBUS_ERR:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_clr_err) {
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- reset_otg();
- init_hsm();
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VFALL:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- } else if (!langwell->hsm.a_sess_vld) {
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
- break;
- default:
- ;
- }
-
- otg_dbg("%s: new state = %s\n", __func__,
- state_string(langwell->otg.state));
-}
-
- static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "USBCMD = 0x%08x \n"
- "USBSTS = 0x%08x \n"
- "USBINTR = 0x%08x \n"
- "ASYNCLISTADDR = 0x%08x \n"
- "PORTSC1 = 0x%08x \n"
- "HOSTPC1 = 0x%08x \n"
- "OTGSC = 0x%08x \n"
- "USBMODE = 0x%08x \n",
- readl(langwell->regs + 0x30),
- readl(langwell->regs + 0x34),
- readl(langwell->regs + 0x38),
- readl(langwell->regs + 0x48),
- readl(langwell->regs + 0x74),
- readl(langwell->regs + 0xb4),
- readl(langwell->regs + 0xf4),
- readl(langwell->regs + 0xf8)
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "current state = %s\n"
- "a_bus_resume = \t%d\n"
- "a_bus_suspend = \t%d\n"
- "a_conn = \t%d\n"
- "a_sess_vld = \t%d\n"
- "a_srp_det = \t%d\n"
- "a_vbus_vld = \t%d\n"
- "b_bus_resume = \t%d\n"
- "b_bus_suspend = \t%d\n"
- "b_conn = \t%d\n"
- "b_se0_srp = \t%d\n"
- "b_sess_end = \t%d\n"
- "b_sess_vld = \t%d\n"
- "id = \t%d\n"
- "a_set_b_hnp_en = \t%d\n"
- "b_srp_done = \t%d\n"
- "b_hnp_enable = \t%d\n"
- "a_wait_vrise_tmout = \t%d\n"
- "a_wait_bcon_tmout = \t%d\n"
- "a_aidl_bdis_tmout = \t%d\n"
- "b_ase0_brst_tmout = \t%d\n"
- "a_bus_drop = \t%d\n"
- "a_bus_req = \t%d\n"
- "a_clr_err = \t%d\n"
- "a_suspend_req = \t%d\n"
- "b_bus_req = \t%d\n"
- "b_bus_suspend_tmout = \t%d\n"
- "b_bus_suspend_vld = \t%d\n",
- state_string(langwell->otg.state),
- langwell->hsm.a_bus_resume,
- langwell->hsm.a_bus_suspend,
- langwell->hsm.a_conn,
- langwell->hsm.a_sess_vld,
- langwell->hsm.a_srp_det,
- langwell->hsm.a_vbus_vld,
- langwell->hsm.b_bus_resume,
- langwell->hsm.b_bus_suspend,
- langwell->hsm.b_conn,
- langwell->hsm.b_se0_srp,
- langwell->hsm.b_sess_end,
- langwell->hsm.b_sess_vld,
- langwell->hsm.id,
- langwell->hsm.a_set_b_hnp_en,
- langwell->hsm.b_srp_done,
- langwell->hsm.b_hnp_enable,
- langwell->hsm.a_wait_vrise_tmout,
- langwell->hsm.a_wait_bcon_tmout,
- langwell->hsm.a_aidl_bdis_tmout,
- langwell->hsm.b_ase0_brst_tmout,
- langwell->hsm.a_bus_drop,
- langwell->hsm.a_bus_req,
- langwell->hsm.a_clr_err,
- langwell->hsm.a_suspend_req,
- langwell->hsm.b_bus_req,
- langwell->hsm.b_bus_suspend_tmout,
- langwell->hsm.b_bus_suspend_vld
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_req = 0\n");
- } else if (buf[0] == '1') {
- /* If a_bus_drop is TRUE, a_bus_req can't be set */
- if (langwell->hsm.a_bus_drop)
- return -1;
- langwell->hsm.a_bus_req = 1;
- otg_dbg("a_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_drop = 0;
- otg_dbg("a_bus_drop = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.a_bus_drop = 1;
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
- get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (langwell->otg.default_a)
- return -1;
-
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("b_bus_req = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.b_bus_req = 1;
- otg_dbg("b_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '1') {
- langwell->hsm.a_clr_err = 1;
- otg_dbg("a_clr_err = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
- &dev_attr_a_bus_req.attr,
- &dev_attr_a_bus_drop.attr,
- &dev_attr_b_bus_req.attr,
- &dev_attr_a_clr_err.attr,
- NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
- .name = "inputs",
- .attrs = inputs_attrs,
-};
-
-int langwell_register_host(struct pci_driver *host_driver)
-{
- int ret = 0;
-
- the_transceiver->host_ops = host_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is registered\n");
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_host);
-
-void langwell_unregister_host(struct pci_driver *host_driver)
-{
- if (the_transceiver->host_ops)
- the_transceiver->host_ops->remove(the_transceiver->pdev);
- the_transceiver->host_ops = NULL;
- the_transceiver->hsm.a_bus_drop = 1;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_host);
-
-int langwell_register_peripheral(struct pci_driver *client_driver)
-{
- int ret = 0;
-
- if (client_driver)
- ret = client_driver->probe(the_transceiver->pdev,
- client_driver->id_table);
- if (!ret) {
- the_transceiver->client_ops = client_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is registered\n");
- }
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_peripheral);
-
-void langwell_unregister_peripheral(struct pci_driver *client_driver)
-{
- if (the_transceiver->client_ops)
- the_transceiver->client_ops->remove(the_transceiver->pdev);
- the_transceiver->client_ops = NULL;
- the_transceiver->hsm.b_bus_req = 0;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_peripheral);
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- unsigned long resource, len;
- void __iomem *base = NULL;
- int retval;
- u32 val32;
- struct langwell_otg *langwell;
- char qname[] = "langwell_otg_queue";
-
- retval = 0;
- otg_dbg("\notg controller is detected.\n");
- if (pci_enable_device(pdev) < 0) {
- retval = -ENODEV;
- goto done;
- }
-
- langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
- if (langwell == NULL) {
- retval = -ENOMEM;
- goto done;
- }
- the_transceiver = langwell;
-
- /* control register: BAR 0 */
- resource = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- if (!request_mem_region(resource, len, driver_name)) {
- retval = -EBUSY;
- goto err;
- }
- langwell->region = 1;
-
- base = ioremap_nocache(resource, len);
- if (base == NULL) {
- retval = -EFAULT;
- goto err;
- }
- langwell->regs = base;
-
- if (!pdev->irq) {
- otg_dbg("No IRQ.\n");
- retval = -ENODEV;
- goto err;
- }
-
- langwell->qwork = create_workqueue(qname);
- if (!langwell->qwork) {
- otg_dbg("cannot create workqueue %s\n", qname);
- retval = -ENOMEM;
- goto err;
- }
- INIT_WORK(&langwell->work, langwell_otg_work);
-
- /* OTG common part */
- langwell->pdev = pdev;
- langwell->otg.dev = &pdev->dev;
- langwell->otg.label = driver_name;
- langwell->otg.set_host = langwell_otg_set_host;
- langwell->otg.set_peripheral = langwell_otg_set_peripheral;
- langwell->otg.set_power = langwell_otg_set_power;
- langwell->otg.start_srp = langwell_otg_start_srp;
- langwell->otg.state = OTG_STATE_UNDEFINED;
- if (otg_set_transceiver(&langwell->otg)) {
- otg_dbg("can't set transceiver\n");
- retval = -EBUSY;
- goto err;
- }
-
- reset_otg();
- init_hsm();
-
- spin_lock_init(&langwell->lock);
- spin_lock_init(&langwell->wq_lock);
- INIT_LIST_HEAD(&active_timers);
- langwell_otg_init_timers(&langwell->hsm);
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, langwell) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- retval = -EBUSY;
- goto err;
- }
-
- /* enable OTGSC int */
- val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
- OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
- writel(val32, langwell->regs + CI_OTGSC);
-
- retval = device_create_file(&pdev->dev, &dev_attr_registers);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = device_create_file(&pdev->dev, &dev_attr_hsm);
- if (retval < 0) {
- otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attr group: %d\n", retval);
- goto err;
- }
-
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
-
- return 0;
-
-err:
- if (the_transceiver)
- langwell_otg_remove(pdev);
-done:
- return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- if (langwell->qwork) {
- flush_workqueue(langwell->qwork);
- destroy_workqueue(langwell->qwork);
- }
- langwell_otg_free_timers();
-
- /* disable OTGSC interrupt as OTGSC doesn't change in reset */
- writel(0, langwell->regs + CI_OTGSC);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
- if (langwell->regs)
- iounmap(langwell->regs);
- if (langwell->region)
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
-
- otg_set_transceiver(NULL);
- pci_disable_device(pdev);
- sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
- device_remove_file(&pdev->dev, &dev_attr_hsm);
- device_remove_file(&pdev->dev, &dev_attr_registers);
- kfree(langwell);
- langwell = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
- langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- /* Disbale OTG interrupts */
- langwell_otg_intr(0);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
-
- /* Prevent more otg_work */
- flush_workqueue(langwell->qwork);
- spin_lock(&langwell->wq_lock);
-
- /* start actions */
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_VRISE:
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_IDLE;
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_del_timer(a_wait_bcon_tmr);
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- break;
- case OTG_STATE_A_HOST:
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- langwell_otg_phy_low_power(1);
- break;
- case OTG_STATE_A_SUSPEND:
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_B_HOST:
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_B_IDLE;
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- break;
- case OTG_STATE_B_WAIT_ACON:
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- transceiver_suspend(pdev);
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
- spin_unlock(&langwell->wq_lock);
-
- return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
- pci_restore_state(pdev);
- pci_set_power_state(pdev, PCI_D0);
- langwell_otg_phy_low_power(0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- spin_lock(&langwell->wq_lock);
-
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_resume(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell_otg_drv_vbus(1);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_A_HOST:
- langwell_otg_drv_vbus(1);
- langwell_otg_phy_low_power(0);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->resume(pdev);
- else
- otg_dbg("client driver not loaded.\n");
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, the_transceiver) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- ret = -EBUSY;
- }
-
- /* enable OTG interrupts */
- langwell_otg_intr(1);
-
- spin_unlock(&langwell->wq_lock);
-
- queue_work(langwell->qwork, &langwell->work);
-
-
- return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
- return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
- pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 9ed5ea5..af456b4 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -53,6 +53,7 @@
void usb_nop_xceiv_unregister(void)
{
platform_device_unregister(pd);
+ pd = NULL;
}
EXPORT_SYMBOL(usb_nop_xceiv_unregister);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 247b61b..0e4f2e4 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,9 +169,11 @@
kfree(tty);
}
}
- /* So we know not to kill the hardware on a hangup on this
- port. We have also bumped the use count by one so it won't go
- idle */
+ /* Now that any required fake tty operations are completed restore
+ * the tty port count */
+ --port->port.count;
+ /* The console is special in terms of closing the device so
+ * indicate this port is now acting as a system console. */
port->console = 1;
retval = 0;
@@ -204,7 +206,7 @@
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->port.count) {
+ if (!port->console) {
dbg("%s - port not opened", __func__);
return;
}
@@ -300,8 +302,7 @@
{
if (usbcons_info.port) {
unregister_console(&usbcons);
- if (usbcons_info.port->port.count)
- usbcons_info.port->port.count--;
+ usbcons_info.port->console = 0;
usbcons_info.port = NULL;
}
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 2b9eeda..985cbcf 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -67,6 +67,8 @@
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -78,6 +80,7 @@
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
@@ -94,7 +97,9 @@
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9734085..59adfe1 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1228,8 +1228,8 @@
/* precursor to disconnect so just go away */
return;
case -EPIPE:
- usb_clear_halt(port->serial->dev, 0x81);
- break;
+ /* Can't call usb_clear_halt while in_interrupt */
+ /* FALLS THROUGH */
default:
/* something ugly is going on... */
dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc3768..8fec5d4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,6 +33,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -107,6 +108,7 @@
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int ftdi_NDI_device_setup(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -118,6 +120,10 @@
.probe = ftdi_mtxorb_hack_setup,
};
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+ .probe = ftdi_NDI_device_setup,
+};
+
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
@@ -191,6 +197,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -579,6 +586,9 @@
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
@@ -644,6 +654,16 @@
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
@@ -660,6 +680,8 @@
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
@@ -667,7 +689,6 @@
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
@@ -677,6 +698,10 @@
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+ { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+ { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
+ { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1023,6 +1048,16 @@
case FT2232C: /* FT2232C chip */
case FT232RL:
if (baud <= 3000000) {
+ __u16 product_id = le16_to_cpu(
+ port->serial->dev->descriptor.idProduct);
+ if (((FTDI_NDI_HUC_PID == product_id) ||
+ (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+ (FTDI_NDI_FUTURE_2_PID == product_id) ||
+ (FTDI_NDI_FUTURE_3_PID == product_id) ||
+ (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+ (baud == 19200)) {
+ baud = 1200000;
+ }
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
@@ -1554,6 +1589,39 @@
} /* ftdi_HE_TIRA1_setup */
/*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ int latency = ndi_latency_timer;
+ int rv = 0;
+ char buf[1];
+
+ if (latency == 0)
+ latency = 1;
+ if (latency > 99)
+ latency = 99;
+
+ dbg("%s setting NDI device latency to %d", __func__, latency);
+ dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+ rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ latency, 0, buf, 0, WDR_TIMEOUT);
+ return 0;
+}
+
+/*
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
* userspace using openocd.
@@ -2121,7 +2189,7 @@
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
- if (!usb_serial_handle_sysrq_char(port,
+ if (!usb_serial_handle_sysrq_char(tty, port,
data[packet_offset + i]))
tty_insert_flip_char(tty,
data[packet_offset + i],
@@ -2622,3 +2690,5 @@
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified product ID");
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f1d440a..8c92b88 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -506,6 +506,7 @@
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
@@ -614,6 +615,9 @@
#define FTDI_CCSICDU20_0_PID 0xF9D0
#define FTDI_CCSICDU40_1_PID 0xF9D1
#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
@@ -736,6 +740,15 @@
#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
+/*
* Posiflex inc retail equipment (http://www.posiflex.com.tw)
*/
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
@@ -848,9 +861,6 @@
#define TML_VID 0x1B91 /* Vendor ID */
#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID 0xDA70
-
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
@@ -934,6 +944,29 @@
#define MARVELL_VID 0x9e88
#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
+#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
+
+/*
+ * Bayer Ascensia Contour blood glucose meter USB-converter cable.
+ * http://winglucofacts.com/cables/
+ */
+#define BAYER_VID 0x1A79
+#define BAYER_CONTOUR_CABLE_PID 0x6001
+
+/*
+ * Marvell OpenRD Base, Client
+ * http://www.open-rd.org
+ * OpenRD Base, Client use VID 0x0403
+ */
+#define MARVELL_OPENRD_PID 0x9e90
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 932d624..ce57f6a 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -424,10 +424,17 @@
if (!tty)
goto done;
- /* Push data to tty */
- for (i = 0; i < urb->actual_length; i++, ch++) {
- if (!usb_serial_handle_sysrq_char(port, *ch))
- tty_insert_flip_char(tty, *ch, TTY_NORMAL);
+ /* The per character mucking around with sysrq path it too slow for
+ stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
+ where the USB serial is not a console anyway */
+ if (!port->console || !port->sysrq)
+ tty_insert_flip_string(tty, ch, urb->actual_length);
+ else {
+ /* Push data to tty */
+ for (i = 0; i < urb->actual_length; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+ tty_insert_flip_char(tty, *ch, TTY_NORMAL);
+ }
}
tty_flip_buffer_push(tty);
tty_kref_put(tty);
@@ -527,11 +534,12 @@
}
}
-int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch)
+int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+ struct usb_serial_port *port, unsigned int ch)
{
if (port->sysrq && port->console) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, tty_port_tty_get(&port->port));
+ handle_sysrq(ch, tty);
port->sysrq = 0;
return 1;
}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bfc5ce0..ccd4dd3 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -521,7 +521,7 @@
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
dbg("%s:leaving ...........", __func__);
- return -ENODEV;
+ return 0;
}
for (i = 0; i < NUM_URBS; ++i) {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c40f95c..270009a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,6 +26,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -123,10 +124,13 @@
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- * - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
#define USB_VENDOR_ID_ATENINTL 0x0557
#define ATENINTL_DEVICE_ID_UC2324 0x2011
+#define ATENINTL_DEVICE_ID_UC2322 0x7820
/* Interrupt Routine Defines */
@@ -176,6 +180,7 @@
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
};
@@ -185,6 +190,7 @@
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
};
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 575816e..c784ddb 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -66,8 +66,10 @@
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct usb_serial_port *port);
+#ifdef CONFIG_PM
static int option_suspend(struct usb_serial *serial, pm_message_t message);
static int option_resume(struct usb_serial *serial);
+#endif
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -205,7 +207,9 @@
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
+#define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100
#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
@@ -258,11 +262,6 @@
#define AXESSTEL_VENDOR_ID 0x1726
#define AXESSTEL_PRODUCT_MV110H 0x1000
-#define ONDA_VENDOR_ID 0x19d2
-#define ONDA_PRODUCT_MSA501HS 0x0001
-#define ONDA_PRODUCT_ET502HS 0x0002
-#define ONDA_PRODUCT_MT503HS 0x2000
-
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
@@ -300,6 +299,7 @@
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
+#define ZTE_PRODUCT_AC8710 0xfff1
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -307,11 +307,25 @@
#define DLINK_VENDOR_ID 0x1186
#define DLINK_PRODUCT_DWM_652 0x3e04
+#define QISDA_VENDOR_ID 0x1da5
+#define QISDA_PRODUCT_H21_4512 0x4512
+#define QISDA_PRODUCT_H21_4523 0x4523
+#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4519 0x4519
+
/* TOSHIBA PRODUCTS */
#define TOSHIBA_VENDOR_ID 0x0930
#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_3GU 0x9200
+
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID 0x1bbb
+#define ALCATEL_PRODUCT_X060S 0x0000
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -428,8 +442,10 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -463,42 +479,6 @@
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
@@ -523,14 +503,85 @@
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
- { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -539,8 +590,10 @@
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+#ifdef CONFIG_PM
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
+#endif
.id_table = option_ids,
.no_dynamic_id = 1,
};
@@ -572,8 +625,10 @@
.disconnect = option_disconnect,
.release = option_release,
.read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
.suspend = option_suspend,
.resume = option_resume,
+#endif
};
static int debug;
@@ -732,7 +787,6 @@
memcpy(this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
- this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed "
@@ -816,7 +870,6 @@
int status = urb->status;
struct usb_serial_port *port = urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
- struct usb_serial *serial = port->serial;
dbg("%s", __func__);
dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -860,7 +913,6 @@
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN && status != -ENOENT) {
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
@@ -913,7 +965,6 @@
struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
- struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
@@ -921,23 +972,11 @@
dbg("%s", __func__);
- /* Reset low level data toggle and start reading from endpoints */
+ /* Start reading from the IN endpoint */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (!urb)
continue;
- if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __func__,
- urb->dev, serial->dev);
- continue;
- }
-
- /*
- * make sure endpoint data toggle is synchronized with the
- * device
- */
- usb_clear_halt(urb->dev, urb->pipe);
-
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
@@ -946,16 +985,6 @@
}
}
- /* Reset low level data toggle on out endpoints */
- for (i = 0; i < N_OUT_URB; i++) {
- urb = portdata->out_urbs[i];
- if (!urb)
- continue;
- urb->dev = serial->dev;
- /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), 0); */
- }
-
option_send_setup(port);
return 0;
@@ -1195,6 +1224,7 @@
}
}
+#ifdef CONFIG_PM
static int option_suspend(struct usb_serial *serial, pm_message_t message)
{
dbg("%s entered", __func__);
@@ -1218,7 +1248,6 @@
dbg("%s: No interrupt URB for port %d\n", __func__, i);
continue;
}
- port->interrupt_in_urb->dev = serial->dev;
err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
dbg("Submitted interrupt URB for port %d (result %d)", i, err);
if (err < 0) {
@@ -1254,6 +1283,7 @@
}
return 0;
}
+#endif
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ec6c132..3e86815 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -94,6 +94,8 @@
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ } /* Terminating entry */
};
@@ -971,18 +973,46 @@
__func__, retval);
}
+static void pl2303_push_data(struct tty_struct *tty,
+ struct usb_serial_port *port, struct urb *urb,
+ u8 line_status)
+{
+ unsigned char *data = urb->transfer_buffer;
+ /* get tty_flag from status */
+ char tty_flag = TTY_NORMAL;
+ /* break takes precedence over parity, */
+ /* which takes precedence over framing errors */
+ if (line_status & UART_BREAK_ERROR)
+ tty_flag = TTY_BREAK;
+ else if (line_status & UART_PARITY_ERROR)
+ tty_flag = TTY_PARITY;
+ else if (line_status & UART_FRAME_ERROR)
+ tty_flag = TTY_FRAME;
+ dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+ tty_buffer_request_room(tty, urb->actual_length + 1);
+ /* overrun is special, not associated with a char */
+ if (line_status & UART_OVERRUN_ERROR)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ if (port->console && port->sysrq) {
+ int i;
+ for (i = 0; i < urb->actual_length; ++i)
+ if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
+ tty_insert_flip_char(tty, data[i], tty_flag);
+ } else
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ tty_flip_buffer_push(tty);
+}
+
static void pl2303_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
- unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- int i;
int result;
int status = urb->status;
u8 line_status;
- char tty_flag;
dbg("%s - port %d", __func__, port->number);
@@ -1010,10 +1040,7 @@
}
usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length, data);
-
- /* get tty_flag from status */
- tty_flag = TTY_NORMAL;
+ urb->actual_length, urb->transfer_buffer);
spin_lock_irqsave(&priv->lock, flags);
line_status = priv->line_status;
@@ -1021,26 +1048,9 @@
spin_unlock_irqrestore(&priv->lock, flags);
wake_up_interruptible(&priv->delta_msr_wait);
- /* break takes precedence over parity, */
- /* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR)
- tty_flag = TTY_BREAK;
- else if (line_status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (line_status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dbg("%s - tty_flag = %d", __func__, tty_flag);
-
tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, urb->actual_length + 1);
- /* overrun is special, not associated with a char */
- if (line_status & UART_OVERRUN_ERROR)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- for (i = 0; i < urb->actual_length; ++i)
- if (!usb_serial_handle_sysrq_char(port, data[i]))
- tty_insert_flip_char(tty, data[i], tty_flag);
- tty_flip_buffer_push(tty);
+ pl2303_push_data(tty, port, urb, line_status);
}
tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 1d7a22e..ee9505e 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -122,3 +122,11 @@
/* Hewlett-Packard LD220-HP POS Pole Display */
#define HP_VENDOR_ID 0x03f0
#define HP_LD220_PRODUCT_ID 0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID 0x04b8
+#define CRESSI_EDY_PRODUCT_ID 0x0521
+
+/* Sony, USB data cable for CMD-Jxx mobile phones */
+#define SONY_VENDOR_ID 0x054c
+#define SONY_QN3USB_PRODUCT_ID 0x0437
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 032f7ae..f48d05e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -181,35 +181,50 @@
};
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+ { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+ { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
+
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */
+ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
+ { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
- /* Sierra Wireless C597 */
+ /* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
- /* Sierra Wireless Device */
+ /* Sierra Wireless T598 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
- { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+ { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+ { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+ { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
- { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */
+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
- { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
+ { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
+ { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
@@ -227,16 +242,13 @@
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C22/C33 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
- { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
- { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+ { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
@@ -814,7 +826,7 @@
return 0;
}
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
@@ -830,7 +842,6 @@
if (!portdata)
continue;
kfree(portdata);
- usb_set_serial_port_data(port, NULL);
}
}
@@ -853,7 +864,7 @@
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
- .disconnect = sierra_disconnect,
+ .release = sierra_release,
.read_int_callback = sierra_instat_callback,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 991d823..3bc609f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -191,7 +191,6 @@
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
- { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -728,7 +727,7 @@
dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&tport->tp_lock, flags);
room = ti_buf_space_avail(tport->tp_write_buf);
@@ -749,7 +748,7 @@
dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&tport->tp_lock, flags);
chars = ti_buf_data_avail(tport->tp_write_buf);
@@ -1658,7 +1657,7 @@
u8 cs = 0;
int done;
struct ti_firmware_header *header;
- int status;
+ int status = 0;
int len;
for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d595aa5..99188c9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,6 +21,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -31,6 +32,7 @@
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/uaccess.h>
+#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "pl2303.h"
@@ -183,6 +185,7 @@
struct usb_serial_port *port;
unsigned int portNumber;
int retval = 0;
+ int first = 0;
dbg("%s", __func__);
@@ -220,8 +223,9 @@
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
- if (port->port.count == 1) {
-
+ /* If the console is attached, the device is already open */
+ if (port->port.count == 1 && !port->console) {
+ first = 1;
/* lock this module before we call it
* this may fail, which means we must bail out,
* safe because we are called with BKL held */
@@ -244,13 +248,21 @@
if (retval)
goto bailout_interface_put;
mutex_unlock(&serial->disc_mutex);
+ set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
mutex_unlock(&port->mutex);
/* Now do the correct tty layer semantics */
retval = tty_port_block_til_ready(&port->port, tty, filp);
- if (retval == 0)
+ if (retval == 0) {
+ if (!first)
+ usb_serial_put(serial);
return 0;
-
+ }
+ mutex_lock(&port->mutex);
+ if (first == 0)
+ goto bailout_mutex_unlock;
+ /* Undo the initial port actions */
+ mutex_lock(&serial->disc_mutex);
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
@@ -333,8 +345,27 @@
{
struct usb_serial_port *port = tty->driver_data;
+ if (!port)
+ return;
+
dbg("%s - port %d", __func__, port->number);
+ /* FIXME:
+ This leaves a very narrow race. Really we should do the
+ serial_do_free() on tty->shutdown(), but tty->shutdown can
+ be called from IRQ context and serial_do_free can sleep.
+
+ The right fix is probably to make the tty free (which is rare)
+ and thus tty->shutdown() occur via a work queue and simplify all
+ the drivers that use it.
+ */
+ if (tty_hung_up_p(filp)) {
+ /* serial_hangup already called serial_down at this point.
+ Another user may have already reopened the port but
+ serial_do_free is refcounted */
+ serial_do_free(port);
+ return;
+ }
if (tty_port_close_start(&port->port, tty, filp) == 0)
return;
@@ -350,7 +381,8 @@
struct usb_serial_port *port = tty->driver_data;
serial_do_down(port);
tty_port_hangup(&port->port);
- serial_do_free(port);
+ /* We must not free port yet - the USB serial layer depends on it's
+ continued existence */
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -389,7 +421,6 @@
struct usb_serial_port *port = tty->driver_data;
dbg("%s = port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
if (port->serial->disconnected)
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index d41cc0a..773a5cd 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -118,6 +118,9 @@
result = memcmp(buffer+8, "Option", 6);
+ if (result != 0)
+ result = memcmp(buffer+8, "ZCOPTION", 8);
+
/* Read the CSW */
usb_stor_bulk_transfer_buf(us,
us->recv_bulk_pipe,
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcb3202..e20dc52 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -961,7 +961,7 @@
US_BULK_GET_MAX_LUN,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE,
- 0, us->ifnum, us->iobuf, 1, HZ);
+ 0, us->ifnum, us->iobuf, 1, 10*HZ);
US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
result, us->iobuf[0]);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1b9c5dd..7477d41 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -838,6 +838,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Rogerio Brito <rbrito@ime.usp.br> */
+UNUSUAL_DEV( 0x067b, 0x2317, 0x0001, 0x001,
+ "Prolific Technology, Inc.",
+ "Mass Storage Device",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
+
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
* Thomas Bartosik <tbartdev@gmx-topmail.de> */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d6d65ef..3b54b39 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -616,6 +616,8 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select STI_CONSOLE
+ select VT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
@@ -1117,12 +1119,13 @@
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+ depends on !DRM_I915
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index fb8163d..a21efcd 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -226,9 +226,10 @@
clcdfb_enable(fb, regs.cntl);
#ifdef DEBUG
- printk(KERN_INFO "CLCD: Registers set to\n"
- KERN_INFO " %08x %08x %08x %08x\n"
- KERN_INFO " %08x %08x %08x %08x\n",
+ printk(KERN_INFO
+ "CLCD: Registers set to\n"
+ " %08x %08x %08x %08x\n"
+ " %08x %08x %08x %08x\n",
readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 018850c..8cd279b 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2405,6 +2405,9 @@
return 0;
}
+/* fbhw->encode_fix() must be called with fb_info->mm_lock held
+ * if it is called after the register_framebuffer() - not a case here
+ */
static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
{
struct atafb_par par;
@@ -2414,7 +2417,8 @@
if (err)
return err;
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
- return fbhw->encode_fix(fix, &par);
+ err = fbhw->encode_fix(fix, &par);
+ return err;
}
static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -2743,7 +2747,9 @@
/* Decode wanted screen parameters */
fbhw->decode_var(&info->var, par);
+ mutex_lock(&info->mm_lock);
fbhw->encode_fix(&info->fix, par);
+ mutex_unlock(&info->mm_lock);
/* Set new videomode */
ata_set_par(par);
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5afd644..da05f08 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -261,6 +261,9 @@
/**
* atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
* @sinfo: the frame buffer to allocate memory for
+ *
+ * This function is called only from the atmel_lcdfb_probe()
+ * so no locking by fb_info->mm_lock around smem_len setting is needed.
*/
static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
{
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 7691e73..1f39a62 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -187,6 +187,8 @@
int mtrr_reg;
#endif
u32 mem_cntl;
+ struct crtc saved_crtc;
+ union aty_pll saved_pll;
};
/*
@@ -217,6 +219,7 @@
#define M64F_XL_DLL 0x00080000
#define M64F_MFB_FORCE_4 0x00100000
#define M64F_HW_TRIPLE 0x00200000
+#define M64F_XL_MEM 0x00400000
/*
* Register access
*/
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1207c20..63d3739 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -66,6 +66,8 @@
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/backlight.h>
+#include <linux/reboot.h>
+#include <linux/dmi.h>
#include <asm/io.h>
#include <linux/uaccess.h>
@@ -249,8 +251,6 @@
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
-static struct crtc saved_crtc;
-static union aty_pll saved_pll;
static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
@@ -261,6 +261,8 @@
static int read_aty_sense(const struct atyfb_par *par);
#endif
+static DEFINE_MUTEX(reboot_lock);
+static struct fb_info *reboot_info;
/*
* Interface used by the world
@@ -361,8 +363,8 @@
#define ATI_CHIP_264GTPRO (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
#define ATI_CHIP_264LTPRO (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
-#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4)
-#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS)
+#define ATI_CHIP_264XL (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM)
+#define ATI_CHIP_MOBILITY (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS)
static struct {
u16 pci_id;
@@ -539,6 +541,7 @@
static char ram_sdram[] __devinitdata = "SDRAM (1:1)";
static char ram_sgram[] __devinitdata = "SGRAM (1:1)";
static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)";
+static char ram_wram[] __devinitdata = "WRAM";
static char ram_off[] __devinitdata = "OFF";
#endif /* CONFIG_FB_ATY_CT */
@@ -553,6 +556,10 @@
#ifdef CONFIG_FB_ATY_CT
static char *aty_ct_ram[8] __devinitdata = {
ram_off, ram_dram, ram_edo, ram_edo,
+ ram_sdram, ram_sgram, ram_wram, ram_resv
+};
+static char *aty_xl_ram[8] __devinitdata = {
+ ram_off, ram_dram, ram_edo, ram_edo,
ram_sdram, ram_sgram, ram_sdram32, ram_resv
};
#endif /* CONFIG_FB_ATY_CT */
@@ -760,6 +767,17 @@
#endif /* CONFIG_FB_ATY_GENERIC_LCD */
}
+static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp)
+{
+ u32 line_length = vxres * bpp / 8;
+
+ if (par->ram_type == SGRAM ||
+ (!M64_HAS(XL_MEM) && par->ram_type == WRAM))
+ line_length = (line_length + 63) & ~63;
+
+ return line_length;
+}
+
static int aty_var_to_crtc(const struct fb_info *info,
const struct fb_var_screeninfo *var, struct crtc *crtc)
{
@@ -769,13 +787,14 @@
u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol;
u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync;
u32 pix_width, dp_pix_width, dp_chain_mask;
+ u32 line_length;
/* input */
- xres = var->xres;
+ xres = (var->xres + 7) & ~7;
yres = var->yres;
- vxres = var->xres_virtual;
+ vxres = (var->xres_virtual + 7) & ~7;
vyres = var->yres_virtual;
- xoffset = var->xoffset;
+ xoffset = (var->xoffset + 7) & ~7;
yoffset = var->yoffset;
bpp = var->bits_per_pixel;
if (bpp == 16)
@@ -827,7 +846,9 @@
} else
FAIL("invalid bpp");
- if (vxres * vyres * bpp / 8 > info->fix.smem_len)
+ line_length = calc_line_length(par, vxres, bpp);
+
+ if (vyres * line_length > info->fix.smem_len)
FAIL("not enough video RAM");
h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
@@ -969,7 +990,9 @@
crtc->xoffset = xoffset;
crtc->yoffset = yoffset;
crtc->bpp = bpp;
- crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19);
+ crtc->off_pitch =
+ ((yoffset * line_length + xoffset * bpp / 8) / 8) |
+ ((line_length / bpp) << 22);
crtc->vline_crnt_vline = 0;
crtc->h_tot_disp = h_total | (h_disp<<16);
@@ -1394,7 +1417,9 @@
}
aty_st_8(DAC_MASK, 0xff, par);
- info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8;
+ info->fix.line_length = calc_line_length(par, var->xres_virtual,
+ var->bits_per_pixel);
+
info->fix.visual = var->bits_per_pixel <= 8 ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
@@ -1505,10 +1530,12 @@
{
u32 xoffset = info->var.xoffset;
u32 yoffset = info->var.yoffset;
- u32 vxres = par->crtc.vxres;
+ u32 line_length = info->fix.line_length;
u32 bpp = info->var.bits_per_pixel;
- par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19);
+ par->crtc.off_pitch =
+ ((yoffset * line_length + xoffset * bpp / 8) / 8) |
+ ((line_length / bpp) << 22);
}
@@ -2201,7 +2228,7 @@
const int *refresh_tbl;
int i, size;
- if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) {
+ if (M64_HAS(XL_MEM)) {
refresh_tbl = ragexl_tbl;
size = ARRAY_SIZE(ragexl_tbl);
} else {
@@ -2335,7 +2362,10 @@
par->pll_ops = &aty_pll_ct;
par->bus_type = PCI;
par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
- ramname = aty_ct_ram[par->ram_type];
+ if (M64_HAS(XL_MEM))
+ ramname = aty_xl_ram[par->ram_type];
+ else
+ ramname = aty_ct_ram[par->ram_type];
/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
par->pll_limits.mclk = 63;
@@ -2390,9 +2420,9 @@
#endif /* CONFIG_FB_ATY_CT */
/* save previous video mode */
- aty_get_crtc(par, &saved_crtc);
+ aty_get_crtc(par, &par->saved_crtc);
if(par->pll_ops->get_pll)
- par->pll_ops->get_pll(info, &saved_pll);
+ par->pll_ops->get_pll(info, &par->saved_pll);
par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
gtb_memsize = M64_HAS(GTB_DSP);
@@ -2667,8 +2697,8 @@
aty_init_exit:
/* restore video mode */
- aty_set_crtc(par, &saved_crtc);
- par->pll_ops->set_pll(info, &saved_pll);
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(info, &par->saved_pll);
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
@@ -3502,6 +3532,11 @@
par->mmap_map[1].prot_flag = _PAGE_E;
#endif /* __sparc__ */
+ mutex_lock(&reboot_lock);
+ if (!reboot_info)
+ reboot_info = info;
+ mutex_unlock(&reboot_lock);
+
return 0;
err_release_io:
@@ -3614,8 +3649,8 @@
struct atyfb_par *par = (struct atyfb_par *) info->par;
/* restore video mode */
- aty_set_crtc(par, &saved_crtc);
- par->pll_ops->set_pll(info, &saved_pll);
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(info, &par->saved_pll);
unregister_framebuffer(info);
@@ -3661,6 +3696,11 @@
{
struct fb_info *info = pci_get_drvdata(pdev);
+ mutex_lock(&reboot_lock);
+ if (reboot_info == info)
+ reboot_info = NULL;
+ mutex_unlock(&reboot_lock);
+
atyfb_remove(info);
}
@@ -3808,6 +3848,56 @@
}
#endif /* MODULE */
+static int atyfb_reboot_notify(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ struct atyfb_par *par;
+
+ if (code != SYS_RESTART)
+ return NOTIFY_DONE;
+
+ mutex_lock(&reboot_lock);
+
+ if (!reboot_info)
+ goto out;
+
+ if (!lock_fb_info(reboot_info))
+ goto out;
+
+ par = reboot_info->par;
+
+ /*
+ * HP OmniBook 500's BIOS doesn't like the state of the
+ * hardware after atyfb has been used. Restore the hardware
+ * to the original state to allow successful reboots.
+ */
+ aty_set_crtc(par, &par->saved_crtc);
+ par->pll_ops->set_pll(reboot_info, &par->saved_pll);
+
+ unlock_fb_info(reboot_info);
+ out:
+ mutex_unlock(&reboot_lock);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block atyfb_reboot_notifier = {
+ .notifier_call = atyfb_reboot_notify,
+};
+
+static const struct dmi_system_id atyfb_reboot_ids[] = {
+ {
+ .ident = "HP OmniBook 500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"),
+ },
+ },
+
+ { }
+};
+
static int __init atyfb_init(void)
{
int err1 = 1, err2 = 1;
@@ -3826,11 +3916,20 @@
err2 = atyfb_atari_probe();
#endif
- return (err1 && err2) ? -ENODEV : 0;
+ if (err1 && err2)
+ return -ENODEV;
+
+ if (dmi_check_system(atyfb_reboot_ids))
+ register_reboot_notifier(&atyfb_reboot_notifier);
+
+ return 0;
}
static void __exit atyfb_exit(void)
{
+ if (dmi_check_system(atyfb_reboot_ids))
+ unregister_reboot_notifier(&atyfb_reboot_notifier);
+
#ifdef CONFIG_PCI
pci_unregister_driver(&atyfb_driver);
#endif
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c
index 0cc9724..51fcc0a 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/aty/mach64_accel.c
@@ -63,14 +63,17 @@
void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
{
u32 pitch_value;
+ u32 vxres;
/* determine modal information from global mode structure */
- pitch_value = info->var.xres_virtual;
+ pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
+ vxres = info->var.xres_virtual;
if (info->var.bits_per_pixel == 24) {
/* In 24 bpp, the engine is in 8 bpp - this requires that all */
/* horizontal coordinates and widths must be adjusted */
pitch_value *= 3;
+ vxres *= 3;
}
/* On GTC (RagePro), we need to reset the 3D engine before */
@@ -133,7 +136,7 @@
aty_st_le32(SC_LEFT, 0, par);
aty_st_le32(SC_TOP, 0, par);
aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
- aty_st_le32(SC_RIGHT, pitch_value - 1, par);
+ aty_st_le32(SC_RIGHT, vxres - 1, par);
/* set background color to minimum value (usually BLACK) */
aty_st_le32(DP_BKGD_CLR, 0, par);
diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index c3ebb6b..7aed256 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -72,7 +72,7 @@
if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
printk(KERN_INFO "bl : failed to set brightness\n");
ret = -ETIMEDOUT;
- goto out
+ goto out;
}
/* at this point we expect that the mcu has accepted
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index e641584..8871662 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -145,6 +145,8 @@
struct backlight_device *bl = platform_get_drvdata(pdev);
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ if (pb->notify)
+ pb->notify(0);
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
return 0;
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 1dae7f8..51422fc 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -356,7 +356,7 @@
lcd->power = FB_BLANK_POWERDOWN;
lcd->mode = MODE_VGA; /* default to VGA */
- lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
+ lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL);
if (lcd->buf == NULL) {
kfree(lcd);
return -ENOMEM;
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 7bad24e..108b89e 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -1,7 +1,7 @@
/*
* Cobalt server LCD frame buffer driver.
*
- * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 471a9a6..3a44695 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1082,7 +1082,6 @@
new_rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
new_cols /= vc->vc_font.width;
new_rows /= vc->vc_font.height;
- vc_resize(vc, new_cols, new_rows);
/*
* We must always set the mode. The mode of the previous console
@@ -1111,10 +1110,11 @@
* vc_{cols,rows}, but we must not set those if we are only
* resizing the console.
*/
- if (!init) {
+ if (init) {
vc->vc_cols = new_cols;
vc->vc_rows = new_rows;
- }
+ } else
+ vc_resize(vc, new_cols, new_rows);
if (logo)
fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows);
diff --git a/drivers/video/console/fbcon_rotate.h b/drivers/video/console/fbcon_rotate.h
index 75be5ce..e233444 100644
--- a/drivers/video/console/fbcon_rotate.h
+++ b/drivers/video/console/fbcon_rotate.h
@@ -45,7 +45,7 @@
width = (width + 7) & ~7;
for (i = 0; i < height; i++) {
- for (j = 0; j < width; j++) {
+ for (j = 0; j < width - shift; j++) {
if (pattern_test_bit(j, i, width, in))
pattern_set_bit(width - (1 + j + shift),
height - (1 + i),
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index ef7870f..857b366 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -957,9 +957,14 @@
#ifdef CONFIG_PCI
unsigned long fb_base, rom_base;
unsigned int fb_len, rom_len;
+ int err;
struct sti_struct *sti;
- pci_enable_device(pd);
+ err = pci_enable_device(pd);
+ if (err < 0) {
+ dev_err(&pd->dev, "Cannot enable PCI device\n");
+ return err;
+ }
fb_base = pci_resource_start(pd, 0);
fb_len = pci_resource_len(pd, 0);
@@ -1048,7 +1053,7 @@
/* Register drivers for native & PCI cards */
register_parisc_driver(&pa_sti_driver);
- pci_register_driver(&pci_sti_driver);
+ WARN_ON(pci_register_driver(&pci_sti_driver));
/* if we didn't find the given default sti, take the first one */
if (!default_sti)
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index f8a09bf..a85c818 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -16,7 +16,6 @@
#include <linux/compat.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/smp_lock.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
@@ -1310,8 +1309,6 @@
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
-__acquires(&info->lock)
-__releases(&info->lock)
{
int fbidx = iminor(file->f_path.dentry->d_inode);
struct fb_info *info = registered_fb[fbidx];
@@ -1325,16 +1322,14 @@
off = vma->vm_pgoff << PAGE_SHIFT;
if (!fb)
return -ENODEV;
+ mutex_lock(&info->mm_lock);
if (fb->fb_mmap) {
int res;
- mutex_lock(&info->lock);
res = fb->fb_mmap(info, vma);
- mutex_unlock(&info->lock);
+ mutex_unlock(&info->mm_lock);
return res;
}
- mutex_lock(&info->lock);
-
/* frame buffer memory */
start = info->fix.smem_start;
len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
@@ -1342,13 +1337,13 @@
/* memory mapped io */
off -= len;
if (info->var.accel_flags) {
- mutex_unlock(&info->lock);
+ mutex_unlock(&info->mm_lock);
return -EINVAL;
}
start = info->fix.mmio_start;
len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
}
- mutex_unlock(&info->lock);
+ mutex_unlock(&info->mm_lock);
start &= PAGE_MASK;
if ((vma->vm_end - vma->vm_start + off) > len)
return -EINVAL;
@@ -1518,6 +1513,7 @@
break;
fb_info->node = i;
mutex_init(&fb_info->lock);
+ mutex_init(&fb_info->mm_lock);
fb_info->dev = device_create(fb_class, fb_info->device,
MKDEV(FB_MAJOR, i), NULL, "fb%d", i);
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 5c1a2c0..9ae9cd3 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -256,8 +256,8 @@
static int edid_checksum(unsigned char *edid)
{
- unsigned char i, csum = 0, all_null = 0;
- int err = 0, fix = check_edid(edid);
+ unsigned char csum = 0, all_null = 0;
+ int i, err = 0, fix = check_edid(edid);
if (fix)
fix_edid(edid, fix);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index f153c58..72d68b3 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -750,24 +750,26 @@
static int map_video_memory(struct fb_info *info)
{
phys_addr_t phys;
+ u32 smem_len = info->fix.line_length * info->var.yres_virtual;
pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
pr_debug("info->fix.line_length = %d\n", info->fix.line_length);
+ pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
- info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
- pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
- info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
+ info->screen_base = fsl_diu_alloc(smem_len, &phys);
if (info->screen_base == NULL) {
printk(KERN_ERR "Unable to allocate fb memory\n");
return -ENOMEM;
}
+ mutex_lock(&info->mm_lock);
info->fix.smem_start = (unsigned long) phys;
+ info->fix.smem_len = smem_len;
+ mutex_unlock(&info->mm_lock);
info->screen_size = info->fix.smem_len;
pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
- info->fix.smem_start,
- info->fix.smem_len);
+ info->fix.smem_start, info->fix.smem_len);
pr_debug("screen base %p\n", info->screen_base);
return 0;
@@ -776,9 +778,11 @@
static void unmap_video_memory(struct fb_info *info)
{
fsl_diu_free(info->screen_base, info->fix.smem_len);
+ mutex_lock(&info->mm_lock);
info->screen_base = NULL;
info->fix.smem_start = 0;
info->fix.smem_len = 0;
+ mutex_unlock(&info->mm_lock);
}
/*
@@ -1219,12 +1223,6 @@
return -EINVAL;
}
- if (fsl_diu_set_par(info)) {
- printk(KERN_ERR "fb_set_par failed");
- fb_dealloc_cmap(&info->cmap);
- return -EINVAL;
- }
-
if (register_framebuffer(info) < 0) {
printk(KERN_ERR "register_framebuffer failed");
unmap_video_memory(info);
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 020db7f..e7116a6 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -44,9 +44,6 @@
.accel = FB_ACCEL_NONE,
};
-static u32 pseudo_palette[16];
-static struct fb_info fb_info;
-
static inline void hitfb_accel_wait(void)
{
while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ;
@@ -331,6 +328,8 @@
static int __init hitfb_probe(struct platform_device *dev)
{
unsigned short lcdclor, ldr3, ldvndr;
+ struct fb_info *info;
+ int ret;
if (fb_get_options("hitfb", NULL))
return -ENODEV;
@@ -384,32 +383,53 @@
break;
}
- fb_info.fbops = &hitfb_ops;
- fb_info.var = hitfb_var;
- fb_info.fix = hitfb_fix;
- fb_info.pseudo_palette = pseudo_palette;
- fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+ info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
+ if (unlikely(!info))
+ return -ENOMEM;
+
+ info->fbops = &hitfb_ops;
+ info->var = hitfb_var;
+ info->fix = hitfb_fix;
+ info->pseudo_palette = info->par;
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
- fb_info.screen_base = (void *)hitfb_fix.smem_start;
+ info->screen_base = (void *)hitfb_fix.smem_start;
- fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (unlikely(ret < 0))
+ goto err_fb;
- if (register_framebuffer(&fb_info) < 0)
- return -EINVAL;
+ ret = register_framebuffer(info);
+ if (unlikely(ret < 0))
+ goto err;
+
+ platform_set_drvdata(dev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n",
- fb_info.node, fb_info.fix.id);
+ info->node, info->fix.id);
+
return 0;
+
+err:
+ fb_dealloc_cmap(&info->cmap);
+err_fb:
+ framebuffer_release(info);
+ return ret;
}
static int __exit hitfb_remove(struct platform_device *dev)
{
- return unregister_framebuffer(&fb_info);
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
+
+ return 0;
}
-#ifdef CONFIG_PM
-static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
+static int hitfb_suspend(struct device *dev)
{
u16 v;
@@ -421,7 +441,7 @@
return 0;
}
-static int hitfb_resume(struct platform_device *dev)
+static int hitfb_resume(struct device *dev)
{
u16 v;
@@ -435,17 +455,19 @@
return 0;
}
-#endif
+
+static struct dev_pm_ops hitfb_dev_pm_ops = {
+ .suspend = hitfb_suspend,
+ .resume = hitfb_resume,
+};
static struct platform_driver hitfb_driver = {
.probe = hitfb_probe,
.remove = __exit_p(hitfb_remove),
-#ifdef CONFIG_PM
- .suspend = hitfb_suspend,
- .resume = hitfb_resume,
-#endif
.driver = {
.name = "hitfb",
+ .owner = THIS_MODULE,
+ .pm = &hitfb_dev_pm_ops,
},
};
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 2e94019..5743ea2 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1090,8 +1090,10 @@
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
strcpy(fix->id, "I810");
+ mutex_lock(&info->mm_lock);
fix->smem_start = par->fb.physical;
fix->smem_len = par->fb.size;
+ mutex_unlock(&info->mm_lock);
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
fix->xpanstep = 8;
@@ -2058,8 +2060,7 @@
fb_var_to_videomode(&mode, &info->var);
fb_add_videomode(&mode, &info->modelist);
- encode_fix(&info->fix, info);
-
+
i810fb_init_ringbuffer(info);
err = register_framebuffer(info);
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c
index 0ce3b0a..a74e5da 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/matrox/matroxfb_DAC1064.c
@@ -454,9 +454,9 @@
dprintk(KERN_DEBUG "DAC1064regs ");
for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) {
dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]);
- if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+ if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
}
- dprintk("\n" KERN_DEBUG "DAC1064clk ");
+ dprintk(KERN_DEBUG "DAC1064clk ");
for (i = 0; i < 6; i++)
dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]);
dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index 1352482..4e82511 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -651,9 +651,9 @@
dprintk(KERN_DEBUG "3026DACregs ");
for (i = 0; i < 21; i++) {
dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]);
- if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... ");
+ if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... ");
}
- dprintk("\n" KERN_DEBUG "DACclk ");
+ dprintk(KERN_DEBUG "DACclk ");
for (i = 0; i < 6; i++)
dprintk("C%02X=%02X ", i, hw->DACclk[i]);
dprintk("\n");
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 8e7a275..0c1049b 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -724,8 +724,10 @@
struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix;
DBG(__func__)
+ mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock);
fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes);
fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes);
+ mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock);
}
static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -1874,7 +1876,6 @@
}
matroxfb_init_fix(PMINFO2);
ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase));
- matroxfb_update_fix(PMINFO2);
/* Normalize values (namely yres_virtual) */
matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon));
/* And put it into "current" var. Do NOT program hardware yet, or we'll not take over
@@ -2081,6 +2082,7 @@
spin_lock_init(&ACCESS_FBINFO(lock.accel));
init_rwsem(&ACCESS_FBINFO(crtc2.lock));
init_rwsem(&ACCESS_FBINFO(altout.lock));
+ mutex_init(&ACCESS_FBINFO(fbcon).mm_lock);
ACCESS_FBINFO(irq_flags) = 0;
init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait));
init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait));
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index 7ac4c5f..ebcb5c6 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -289,7 +289,12 @@
#undef m2info
}
-static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) {
+/*
+ * This function is called before the register_framebuffer so
+ * no locking is needed.
+ */
+static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info)
+{
struct fb_fix_screeninfo *fix = &m2info->fbcon.fix;
strcpy(fix->id, "MATROX DH");
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index b7af525..054ef29 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -669,7 +669,8 @@
}
static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+ bool lock);
static int mx3fb_unmap_video_memory(struct fb_info *fbi);
/**
@@ -711,12 +712,7 @@
complete(&mx3_fbi->flip_cmpl);
}
-/**
- * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi: framebuffer information pointer.
- * @return: 0 on success or negative error code on failure.
- */
-static int mx3fb_set_par(struct fb_info *fbi)
+static int __set_par(struct fb_info *fbi, bool lock)
{
u32 mem_len;
struct ipu_di_signal_cfg sig_cfg;
@@ -727,10 +723,6 @@
struct idmac_video_param *video = &ichan->params.video;
struct scatterlist *sg = mx3_fbi->sg;
- dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
- mutex_lock(&mx3_fbi->mutex);
-
/* Total cleanup */
if (mx3_fbi->txd)
sdc_disable_channel(mx3_fbi);
@@ -742,11 +734,8 @@
if (fbi->fix.smem_start)
mx3fb_unmap_video_memory(fbi);
- fbi->fix.smem_len = mem_len;
- if (mx3fb_map_video_memory(fbi) < 0) {
- mutex_unlock(&mx3_fbi->mutex);
+ if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0)
return -ENOMEM;
- }
}
sg_init_table(&sg[0], 1);
@@ -792,7 +781,6 @@
fbi->var.vsync_len,
fbi->var.lower_margin +
fbi->var.vsync_len, sig_cfg) != 0) {
- mutex_unlock(&mx3_fbi->mutex);
dev_err(fbi->device,
"mx3fb: Error initializing panel.\n");
return -EINVAL;
@@ -811,9 +799,30 @@
if (mx3_fbi->blank == FB_BLANK_UNBLANK)
sdc_enable_channel(mx3_fbi);
+ return 0;
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ int ret;
+
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ ret = __set_par(fbi, true);
+
mutex_unlock(&mx3_fbi->mutex);
- return 0;
+ return ret;
}
/**
@@ -967,21 +976,11 @@
return ret;
}
-/**
- * mx3fb_blank() - blank the display.
- */
-static int mx3fb_blank(int blank, struct fb_info *fbi)
+static void __blank(int blank, struct fb_info *fbi)
{
struct mx3fb_info *mx3_fbi = fbi->par;
struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
- blank, fbi->screen_base, fbi->fix.smem_len);
-
- if (mx3_fbi->blank == blank)
- return 0;
-
- mutex_lock(&mx3_fbi->mutex);
mx3_fbi->blank = blank;
switch (blank) {
@@ -1000,6 +999,23 @@
sdc_set_brightness(mx3fb, mx3fb->backlight_level);
break;
}
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+
+ dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
+ blank, fbi->screen_base, fbi->fix.smem_len);
+
+ if (mx3_fbi->blank == blank)
+ return 0;
+
+ mutex_lock(&mx3_fbi->mutex);
+ __blank(blank, fbi);
mutex_unlock(&mx3_fbi->mutex);
return 0;
@@ -1198,6 +1214,8 @@
/**
* mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
* @fbi: framebuffer information pointer
+ * @mem_len: length of mapped memory
+ * @lock: do not lock during initialisation
* @return: Error code indicating success or failure
*
* This buffer is remapped into a non-cached, non-buffered, memory region to
@@ -1205,23 +1223,29 @@
* area is remapped, all virtual memory access to the video memory should occur
* at the new region.
*/
-static int mx3fb_map_video_memory(struct fb_info *fbi)
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
+ bool lock)
{
int retval = 0;
dma_addr_t addr;
fbi->screen_base = dma_alloc_writecombine(fbi->device,
- fbi->fix.smem_len,
+ mem_len,
&addr, GFP_DMA);
if (!fbi->screen_base) {
dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
- fbi->fix.smem_len);
+ mem_len);
retval = -EBUSY;
goto err0;
}
+ if (lock)
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = addr;
+ fbi->fix.smem_len = mem_len;
+ if (lock)
+ mutex_unlock(&fbi->mm_lock);
dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
@@ -1251,8 +1275,10 @@
fbi->screen_base, fbi->fix.smem_start);
fbi->screen_base = 0;
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = 0;
fbi->fix.smem_len = 0;
+ mutex_unlock(&fbi->mm_lock);
return 0;
}
@@ -1360,11 +1386,11 @@
init_completion(&mx3fbi->flip_cmpl);
disable_irq(ichan->eof_irq);
dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
- ret = mx3fb_set_par(fbi);
+ ret = __set_par(fbi, false);
if (ret < 0)
goto esetpar;
- mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+ __blank(FB_BLANK_UNBLANK, fbi);
dev_info(dev, "registered, using mode %s\n", fb_mode);
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 060d72f..8862233 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -393,8 +393,10 @@
rg = &plane->fbdev->mem_desc.region[plane->idx];
fbi->screen_base = rg->vaddr;
+ mutex_lock(&fbi->mm_lock);
fix->smem_start = rg->paddr;
fix->smem_len = rg->size;
+ mutex_unlock(&fbi->mm_lock);
fix->type = FB_TYPE_PACKED_PIXELS;
bpp = var->bits_per_pixel;
@@ -886,8 +888,10 @@
* plane memory is dealloce'd, the other
* screen parameters in var / fix are invalid.
*/
+ mutex_lock(&fbi->mm_lock);
fbi->fix.smem_start = 0;
fbi->fix.smem_len = 0;
+ mutex_unlock(&fbi->mm_lock);
}
}
}
@@ -1250,7 +1254,7 @@
static ssize_t omapfb_show_caps_num(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int plane;
size_t size;
struct omapfb_caps caps;
@@ -1270,7 +1274,7 @@
static ssize_t omapfb_show_caps_text(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int i;
struct omapfb_caps caps;
int plane;
@@ -1317,7 +1321,7 @@
static ssize_t omapfb_show_panel_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->panel->name);
}
@@ -1326,7 +1330,7 @@
struct device_attribute *attr,
char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int r;
if (fbdev->panel->get_bklight_level) {
@@ -1341,7 +1345,7 @@
struct device_attribute *attr,
const char *buf, size_t size)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int r;
if (fbdev->panel->set_bklight_level) {
@@ -1360,7 +1364,7 @@
static ssize_t omapfb_show_bklight_max(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
int r;
if (fbdev->panel->get_bklight_level) {
@@ -1393,7 +1397,7 @@
static ssize_t omapfb_show_ctrl_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+ struct omapfb_device *fbdev = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->ctrl->name);
}
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 03b3670..bacfabd 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -141,7 +141,9 @@
offset = 0x10;
info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
+ mutex_lock(&info->mm_lock);
info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
+ mutex_unlock(&info->mm_lock);
info->fix.visual = (pinfo->cmode == CMODE_8) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 0889d50..6506117 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -815,8 +815,10 @@
ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
ofb->video_mem_size = size;
+ mutex_lock(&ofb->fb.mm_lock);
ofb->fb.fix.smem_start = ofb->video_mem_phys;
ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual;
+ mutex_unlock(&ofb->fb.mm_lock);
ofb->fb.screen_base = ofb->video_mem;
return 0;
}
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 43680e5..5a72083 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,23 +211,21 @@
/**
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
+ * @id: window id.
* @sfb: The hardware state.
* @pixclock: The pixel clock wanted, in picoseconds.
*
* Given the specified pixel clock, work out the necessary divider to get
* close to the output frequency.
*/
-static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
{
+ struct s3c_fb_pd_win *win = sfb->pdata->win[id];
unsigned long clk = clk_get_rate(sfb->bus_clk);
- unsigned long long tmp;
unsigned int result;
- tmp = (unsigned long long)clk;
- tmp *= pixclk;
-
- do_div(tmp, 1000000000UL);
- result = (unsigned int)tmp / 1000;
+ pixclk *= win->win_mode.refresh;
+ result = clk / pixclk;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
pixclk, clk, result, clk / result);
@@ -267,6 +265,7 @@
struct s3c_fb *sfb = win->parent;
void __iomem *regs = sfb->regs;
int win_no = win->index;
+ u32 osdc_data = 0;
u32 data;
u32 pagewidth;
int clkdiv;
@@ -302,7 +301,7 @@
/* use window 0 as the basis for the lcd output timings */
if (win_no == 0) {
- clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
+ clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
data = sfb->pdata->vidcon0;
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
@@ -359,8 +358,6 @@
data = var->xres * var->yres;
- u32 osdc_data = 0;
-
osdc_data = VIDISD14C_ALPHA1_R(0xf) |
VIDISD14C_ALPHA1_G(0xf) |
VIDISD14C_ALPHA1_B(0xf);
@@ -967,7 +964,7 @@
struct s3c_fb *sfb = platform_get_drvdata(pdev);
int win;
- for (win = 0; win <= S3C_FB_MAX_WIN; win++)
+ for (win = 0; win < S3C_FB_MAX_WIN; win++)
if (sfb->windows[win])
s3c_fb_release_win(sfb, sfb->windows[win]);
@@ -991,7 +988,7 @@
struct s3c_fb_win *win;
int win_no;
- for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) {
+ for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
win = sfb->windows[win_no];
if (!win)
continue;
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 653bdfe..9f6d6e6 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -120,18 +120,6 @@
return 0;
}
-static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
- unsigned long stride)
-{
- memset(fix, 0, sizeof(struct fb_fix_screeninfo));
- strcpy(fix->id, "sh7760-lcdc");
-
- fix->smem_start = (unsigned long)info->screen_base;
- fix->smem_len = info->screen_size;
-
- fix->line_length = stride;
-}
-
static int sh7760fb_get_color_info(struct device *dev,
u16 lddfr, int *bpp, int *gray)
{
@@ -334,7 +322,8 @@
iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */
- encode_fix(&info->fix, info, stride);
+ info->fix.line_length = stride;
+
sh7760fb_check_var(&info->var, info);
sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */
@@ -435,6 +424,8 @@
info->screen_base = fbmem;
info->screen_size = vram;
+ info->fix.smem_start = (unsigned long)info->screen_base;
+ info->fix.smem_len = info->screen_size;
return 0;
}
@@ -520,6 +511,8 @@
info->var.transp.length = 0;
info->var.transp.msb_right = 0;
+ strcpy(info->fix.id, "sh7760-lcdc");
+
/* set the DON2 bit now, before cmap allocation, as it will randomize
* palette memory.
*/
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f10d2fb..8f24564 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/atomic.h>
@@ -30,9 +31,10 @@
unsigned long enabled; /* ME and SE in LDCNT2R */
struct sh_mobile_lcdc_chan_cfg cfg;
u32 pseudo_palette[PALETTE_NR];
- struct fb_info info;
+ struct fb_info *info;
dma_addr_t dma_handle;
struct fb_deferred_io defio;
+ struct scatterlist *sglist;
unsigned long frame_end;
wait_queue_head_t frame_end_wait;
};
@@ -206,16 +208,38 @@
static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) {}
#endif
+static int sh_mobile_lcdc_sginit(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT;
+ struct page *page;
+ int nr_pages = 0;
+
+ sg_init_table(ch->sglist, nr_pages_max);
+
+ list_for_each_entry(page, pagelist, lru)
+ sg_set_page(&ch->sglist[nr_pages++], page, PAGE_SIZE, 0);
+
+ return nr_pages;
+}
+
static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
struct list_head *pagelist)
{
struct sh_mobile_lcdc_chan *ch = info->par;
+ unsigned int nr_pages;
/* enable clocks before accessing hardware */
sh_mobile_lcdc_clk_on(ch->lcdc);
+ nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
+ dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+
/* trigger panel update */
lcdc_write_chan(ch, LDSM2R, 1);
+
+ dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
}
static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
@@ -418,22 +442,22 @@
/* set bpp format in PKF[4:0] */
tmp = lcdc_read_chan(ch, LDDFR);
tmp &= ~(0x0001001f);
- tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
+ tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
lcdc_write_chan(ch, LDDFR, tmp);
/* point out our frame buffer */
- lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
+ lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start);
/* set line size */
- lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
+ lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length);
/* setup deferred io if SYS bus */
tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
if (ch->ldmt1r_value & (1 << 12) && tmp) {
ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
ch->defio.delay = msecs_to_jiffies(tmp);
- ch->info.fbdefio = &ch->defio;
- fb_deferred_io_init(&ch->info);
+ ch->info->fbdefio = &ch->defio;
+ fb_deferred_io_init(ch->info);
/* one-shot mode */
lcdc_write_chan(ch, LDSM1R, 1);
@@ -479,12 +503,12 @@
* flush frame, and wait for frame end interrupt
* clean up deferred io and enable clock
*/
- if (ch->info.fbdefio) {
+ if (ch->info->fbdefio) {
ch->frame_end = 0;
- schedule_delayed_work(&ch->info.deferred_work, 0);
+ schedule_delayed_work(&ch->info->deferred_work, 0);
wait_event(ch->frame_end_wait, ch->frame_end);
- fb_deferred_io_cleanup(&ch->info);
- ch->info.fbdefio = NULL;
+ fb_deferred_io_cleanup(ch->info);
+ ch->info->fbdefio = NULL;
sh_mobile_lcdc_clk_on(priv);
}
@@ -793,9 +817,16 @@
priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
for (i = 0; i < j; i++) {
- info = &priv->ch[i].info;
cfg = &priv->ch[i].cfg;
+ priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
+ if (!priv->ch[i].info) {
+ dev_err(&pdev->dev, "unable to allocate fb_info\n");
+ error = -ENOMEM;
+ break;
+ }
+
+ info = priv->ch[i].info;
info->fbops = &sh_mobile_lcdc_ops;
info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
@@ -846,21 +877,31 @@
}
for (i = 0; i < j; i++) {
- error = register_framebuffer(&priv->ch[i].info);
+ struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+
+ info = ch->info;
+
+ if (info->fbdefio) {
+ priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+ info->fix.smem_len >> PAGE_SHIFT);
+ if (!priv->ch->sglist) {
+ dev_err(&pdev->dev, "cannot allocate sglist\n");
+ goto err1;
+ }
+ }
+
+ error = register_framebuffer(info);
if (error < 0)
goto err1;
- }
- for (i = 0; i < j; i++) {
- info = &priv->ch[i].info;
dev_info(info->dev,
"registered %s/%s as %dx%d %dbpp.\n",
pdev->name,
- (priv->ch[i].cfg.chan == LCDC_CHAN_MAINLCD) ?
+ (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
"mainlcd" : "sublcd",
- (int) priv->ch[i].cfg.lcd_cfg.xres,
- (int) priv->ch[i].cfg.lcd_cfg.yres,
- priv->ch[i].cfg.bpp);
+ (int) ch->cfg.lcd_cfg.xres,
+ (int) ch->cfg.lcd_cfg.yres,
+ ch->cfg.bpp);
/* deferred io mode: disable clock to save power */
if (info->fbdefio)
@@ -881,20 +922,24 @@
int i;
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
- if (priv->ch[i].info.dev)
- unregister_framebuffer(&priv->ch[i].info);
+ if (priv->ch[i].info->dev)
+ unregister_framebuffer(priv->ch[i].info);
sh_mobile_lcdc_stop(priv);
for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
- info = &priv->ch[i].info;
+ info = priv->ch[i].info;
- if (!info->device)
+ if (!info || !info->device)
continue;
+ if (priv->ch[i].sglist)
+ vfree(priv->ch[i].sglist);
+
dma_free_coherent(&pdev->dev, info->fix.smem_len,
info->screen_base, priv->ch[i].dma_handle);
fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
}
#ifdef CONFIG_HAVE_CLK
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7072d19..4a067f0 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1847,8 +1847,10 @@
strcpy(fix->id, ivideo->myid);
+ mutex_lock(&info->mm_lock);
fix->smem_start = ivideo->video_base + ivideo->video_offset;
fix->smem_len = ivideo->sisfb_mem;
+ mutex_unlock(&info->mm_lock);
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
fix->visual = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
@@ -6365,7 +6367,6 @@
sis_fb_info->fix = ivideo->sisfb_fix;
sis_fb_info->screen_base = ivideo->video_vbase + ivideo->video_offset;
sis_fb_info->fbops = &sisfb_ops;
- sisfb_get_fix(&sis_fb_info->fix, -1, sis_fb_info);
sis_fb_info->pseudo_palette = ivideo->pseudo_palette;
fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0);
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index eb5d73a..924d794 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -145,7 +145,7 @@
#define SM501_MEMF_ACCEL (8)
static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
- unsigned int why, size_t size)
+ unsigned int why, size_t size, u32 smem_len)
{
struct sm501fb_par *par;
struct fb_info *fbi;
@@ -172,7 +172,7 @@
if (ptr > 0)
ptr &= ~(PAGE_SIZE - 1);
- if (fbi && ptr < fbi->fix.smem_len)
+ if (fbi && ptr < smem_len)
return -ENOMEM;
break;
@@ -197,7 +197,7 @@
case SM501_MEMF_ACCEL:
fbi = inf->fb[HEAD_CRT];
- ptr = fbi ? fbi->fix.smem_len : 0;
+ ptr = fbi ? smem_len : 0;
fbi = inf->fb[HEAD_PANEL];
if (fbi) {
@@ -413,6 +413,7 @@
unsigned int mem_type;
unsigned int clock_type;
unsigned int head_addr;
+ unsigned int smem_len;
dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
__func__, var->xres, var->yres, var->bits_per_pixel,
@@ -453,18 +454,20 @@
/* allocate fb memory within 501 */
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
- info->fix.smem_len = info->fix.line_length * var->yres_virtual;
+ smem_len = info->fix.line_length * var->yres_virtual;
dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
info->fix.line_length);
- if (sm501_alloc_mem(fbi, &par->screen, mem_type,
- info->fix.smem_len)) {
+ if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) {
dev_err(fbi->dev, "no memory available\n");
return -ENOMEM;
}
+ mutex_lock(&info->mm_lock);
info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
+ info->fix.smem_len = smem_len;
+ mutex_unlock(&info->mm_lock);
info->screen_base = fbi->fbmem + par->screen.sm_addr;
info->screen_size = info->fix.smem_len;
@@ -637,7 +640,8 @@
if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
/* the head is displaying panel data... */
- sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
+ sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0,
+ info->fix.smem_len);
goto out_update;
}
@@ -1289,7 +1293,8 @@
par->cursor_regs = info->regs + reg_base;
- ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
+ ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024,
+ fbi->fix.smem_len);
if (ret < 0)
return ret;
@@ -1535,9 +1540,6 @@
if (ret)
dev_err(info->dev, "check_var() failed on initial setup?\n");
- /* ensure we've activated our new configuration */
- (fb->fbops->fb_set_par)(fb);
-
return 0;
}
@@ -1619,6 +1621,8 @@
if (!fbi)
return 0;
+ mutex_init(&info->fb[head]->mm_lock);
+
ret = sm501fb_init_fb(info->fb[head], head, drvname);
if (ret) {
dev_err(info->dev, "cannot initialise fb %s\n", drvname);
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index eec9dcb..6120f0c 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1115,10 +1115,9 @@
if the device name contains the string "DX" and tell the
user how to reconfigure the card. */
if (strstr(sti->outptr.dev_name, "DX")) {
- printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
- "support '%s' in double-buffer mode.\n"
- KERN_WARNING "WARNING: Please disable the double-buffer mode "
- "in IPL menu (the PARISC-BIOS).\n",
+ printk(KERN_WARNING
+"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
+"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
sti->outptr.dev_name);
goto out_err0;
}
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index fcd53ce..c896000 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -2407,14 +2407,14 @@
viafb_dvi_set_mode(viafb_get_mode_index
(viaparinfo->tmds_setting_info->h_active,
viaparinfo->tmds_setting_info->
- v_active, 1),
+ v_active),
video_bpp1, viaparinfo->
tmds_setting_info->iga_path);
} else {
viafb_dvi_set_mode(viafb_get_mode_index
(viaparinfo->tmds_setting_info->h_active,
viaparinfo->
- tmds_setting_info->v_active, 0),
+ tmds_setting_info->v_active),
video_bpp, viaparinfo->
tmds_setting_info->iga_path);
}
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 6c7290a..78c6b33 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -580,10 +580,7 @@
int reg_num = 0;
struct io_reg *lcd_patch_reg = NULL;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
switch (panel_id) {
/* LCD 800x600 */
case LCD_PANEL_ID1_800X600:
@@ -761,10 +758,7 @@
int reg_num = 0;
struct io_reg *lcd_patch_reg = NULL;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
switch (panel_id) {
case LCD_PANEL_ID5_1400X1050:
@@ -832,10 +826,7 @@
{
int vmode_index;
- if (viaparinfo->lvds_setting_info->iga_path == IGA2)
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 1);
- else
- vmode_index = viafb_get_mode_index(set_hres, set_vres, 0);
+ vmode_index = viafb_get_mode_index(set_hres, set_vres);
viafb_unlock_crt();
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index a0fec29..72833f3 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -32,7 +32,6 @@
/* video mode */
static char *viafb_mode = "640x480";
static char *viafb_mode1 = "640x480";
-static int viafb_resMode = VIA_RES_640X480;
/* Added for specifying active devices.*/
char *viafb_active_dev = "";
@@ -56,47 +55,47 @@
/* Mode information */
static const struct viafb_modeinfo viafb_modentry[] = {
- {480, 640, VIA_RES_480X640, "480x640"},
- {640, 480, VIA_RES_640X480, "640x480"},
- {800, 480, VIA_RES_800X480, "800x480"},
- {800, 600, VIA_RES_800X600, "800x600"},
- {1024, 768, VIA_RES_1024X768, "1024x768"},
- {1152, 864, VIA_RES_1152X864, "1152x864"},
- {1280, 1024, VIA_RES_1280X1024, "1280x1024"},
- {1600, 1200, VIA_RES_1600X1200, "1600x1200"},
- {1440, 1050, VIA_RES_1440X1050, "1440x1050"},
- {1280, 768, VIA_RES_1280X768, "1280x768"},
- {1280, 800, VIA_RES_1280X800, "1280x800"},
- {1280, 960, VIA_RES_1280X960, "1280x960"},
- {1920, 1440, VIA_RES_1920X1440, "1920x1440"},
- {848, 480, VIA_RES_848X480, "848x480"},
- {1400, 1050, VIA_RES_1400X1050, "1400x1050"},
- {720, 480, VIA_RES_720X480, "720x480"},
- {720, 576, VIA_RES_720X576, "720x576"},
- {1024, 512, VIA_RES_1024X512, "1024x512"},
- {1024, 576, VIA_RES_1024X576, "1024x576"},
- {1024, 600, VIA_RES_1024X600, "1024x600"},
- {1280, 720, VIA_RES_1280X720, "1280x720"},
- {1920, 1080, VIA_RES_1920X1080, "1920x1080"},
- {1366, 768, VIA_RES_1368X768, "1368x768"},
- {1680, 1050, VIA_RES_1680X1050, "1680x1050"},
- {960, 600, VIA_RES_960X600, "960x600"},
- {1000, 600, VIA_RES_1000X600, "1000x600"},
- {1024, 576, VIA_RES_1024X576, "1024x576"},
- {1024, 600, VIA_RES_1024X600, "1024x600"},
- {1088, 612, VIA_RES_1088X612, "1088x612"},
- {1152, 720, VIA_RES_1152X720, "1152x720"},
- {1200, 720, VIA_RES_1200X720, "1200x720"},
- {1280, 600, VIA_RES_1280X600, "1280x600"},
- {1360, 768, VIA_RES_1360X768, "1360x768"},
- {1440, 900, VIA_RES_1440X900, "1440x900"},
- {1600, 900, VIA_RES_1600X900, "1600x900"},
- {1600, 1024, VIA_RES_1600X1024, "1600x1024"},
- {1792, 1344, VIA_RES_1792X1344, "1792x1344"},
- {1856, 1392, VIA_RES_1856X1392, "1856x1392"},
- {1920, 1200, VIA_RES_1920X1200, "1920x1200"},
- {2048, 1536, VIA_RES_2048X1536, "2048x1536"},
- {0, 0, VIA_RES_INVALID, "640x480"}
+ {480, 640, VIA_RES_480X640},
+ {640, 480, VIA_RES_640X480},
+ {800, 480, VIA_RES_800X480},
+ {800, 600, VIA_RES_800X600},
+ {1024, 768, VIA_RES_1024X768},
+ {1152, 864, VIA_RES_1152X864},
+ {1280, 1024, VIA_RES_1280X1024},
+ {1600, 1200, VIA_RES_1600X1200},
+ {1440, 1050, VIA_RES_1440X1050},
+ {1280, 768, VIA_RES_1280X768,},
+ {1280, 800, VIA_RES_1280X800},
+ {1280, 960, VIA_RES_1280X960},
+ {1920, 1440, VIA_RES_1920X1440},
+ {848, 480, VIA_RES_848X480},
+ {1400, 1050, VIA_RES_1400X1050},
+ {720, 480, VIA_RES_720X480},
+ {720, 576, VIA_RES_720X576},
+ {1024, 512, VIA_RES_1024X512},
+ {1024, 576, VIA_RES_1024X576},
+ {1024, 600, VIA_RES_1024X600},
+ {1280, 720, VIA_RES_1280X720},
+ {1920, 1080, VIA_RES_1920X1080},
+ {1366, 768, VIA_RES_1368X768},
+ {1680, 1050, VIA_RES_1680X1050},
+ {960, 600, VIA_RES_960X600},
+ {1000, 600, VIA_RES_1000X600},
+ {1024, 576, VIA_RES_1024X576},
+ {1024, 600, VIA_RES_1024X600},
+ {1088, 612, VIA_RES_1088X612},
+ {1152, 720, VIA_RES_1152X720},
+ {1200, 720, VIA_RES_1200X720},
+ {1280, 600, VIA_RES_1280X600},
+ {1360, 768, VIA_RES_1360X768},
+ {1440, 900, VIA_RES_1440X900},
+ {1600, 900, VIA_RES_1600X900},
+ {1600, 1024, VIA_RES_1600X1024},
+ {1792, 1344, VIA_RES_1792X1344},
+ {1856, 1392, VIA_RES_1856X1392},
+ {1920, 1200, VIA_RES_1920X1200},
+ {2048, 1536, VIA_RES_2048X1536},
+ {0, 0, VIA_RES_INVALID}
};
static struct fb_ops viafb_ops;
@@ -177,7 +176,7 @@
if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
return -EINVAL;
- vmode_index = viafb_get_mode_index(var->xres, var->yres, 0);
+ vmode_index = viafb_get_mode_index(var->xres, var->yres);
if (vmode_index == VIA_RES_INVALID) {
DEBUG_MSG(KERN_INFO
"viafb: Mode %dx%dx%d not supported!!\n",
@@ -233,14 +232,14 @@
viafb_update_device_setting(info->var.xres, info->var.yres,
info->var.bits_per_pixel, viafb_refresh, 0);
- vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres, 0);
+ vmode_index = viafb_get_mode_index(info->var.xres, info->var.yres);
if (viafb_SAMM_ON == 1) {
DEBUG_MSG(KERN_INFO
"viafb_second_xres = %d, viafb_second_yres = %d, bpp = %d\n",
viafb_second_xres, viafb_second_yres, viafb_bpp1);
vmode_index1 = viafb_get_mode_index(viafb_second_xres,
- viafb_second_yres, 1);
+ viafb_second_yres);
DEBUG_MSG(KERN_INFO "->viafb_SAMM_ON: index=%d\n",
vmode_index1);
@@ -1262,7 +1261,7 @@
return 0;
}
-int viafb_get_mode_index(int hres, int vres, int flag)
+int viafb_get_mode_index(int hres, int vres)
{
u32 i;
DEBUG_MSG(KERN_INFO "viafb_get_mode_index!\n");
@@ -1272,13 +1271,7 @@
viafb_modentry[i].yres == vres)
break;
- viafb_resMode = viafb_modentry[i].mode_index;
- if (flag)
- viafb_mode1 = viafb_modentry[i].mode_res;
- else
- viafb_mode = viafb_modentry[i].mode_res;
-
- return viafb_resMode;
+ return viafb_modentry[i].mode_index;
}
static void check_available_device_to_enable(int device_id)
@@ -2199,7 +2192,7 @@
strict_strtoul(tmpc, 0, &default_xres);
strict_strtoul(tmpm, 0, &default_yres);
- vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
+ vmode_index = viafb_get_mode_index(default_xres, default_yres);
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
if (viafb_SAMM_ON == 1) {
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index a4158e8..227b000 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -81,7 +81,6 @@
u32 xres;
u32 yres;
int mode_index;
- char *mode_res;
};
extern unsigned int viafb_second_virtual_yres;
extern unsigned int viafb_second_virtual_xres;
@@ -102,7 +101,7 @@
void viafb_memory_pitch_patch(struct fb_info *info);
void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
int mode_index);
-int viafb_get_mode_index(int hres, int vres, int flag);
+int viafb_get_mode_index(int hres, int vres);
u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
*plvds_setting_info, struct lvds_chip_information
*plvds_chip_info, u8 index);
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index d0674f1..2376f68 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -523,6 +523,7 @@
info->fix.ywrapstep = 0;
info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
+ mutex_lock(&info->mm_lock);
if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
par->extmem_active = 1;
info->fix.smem_len = par->mach->mem->size+1;
@@ -530,6 +531,7 @@
par->extmem_active = 0;
info->fix.smem_len = MEM_INT_SIZE+1;
}
+ mutex_unlock(&info->mm_lock);
w100fb_activate_var(par);
}
@@ -746,8 +748,6 @@
goto out;
}
- w100fb_set_par(info);
-
if (register_framebuffer(info) < 0) {
err = -EINVAL;
goto out;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 193c8f0..248e00e 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -52,8 +52,10 @@
char (*msix_names)[256];
/* Number of available vectors */
unsigned msix_vectors;
- /* Vectors allocated */
+ /* Vectors allocated, excluding per-vq vectors if any */
unsigned msix_used_vectors;
+ /* Whether we have vector per vq */
+ bool per_vq_vectors;
};
/* Constants for MSI-X */
@@ -258,7 +260,6 @@
for (i = 0; i < vp_dev->msix_used_vectors; ++i)
free_irq(vp_dev->msix_entries[i].vector, vp_dev);
- vp_dev->msix_used_vectors = 0;
if (vp_dev->msix_enabled) {
/* Disable the vector used for configuration */
@@ -267,80 +268,77 @@
/* Flush the write out to device */
ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- vp_dev->msix_enabled = 0;
pci_disable_msix(vp_dev->pci_dev);
+ vp_dev->msix_enabled = 0;
+ vp_dev->msix_vectors = 0;
}
+
+ vp_dev->msix_used_vectors = 0;
+ kfree(vp_dev->msix_names);
+ vp_dev->msix_names = NULL;
+ kfree(vp_dev->msix_entries);
+ vp_dev->msix_entries = NULL;
}
-static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
- int *options, int noptions)
-{
- int i;
- for (i = 0; i < noptions; ++i)
- if (!pci_enable_msix(dev, entries, options[i]))
- return options[i];
- return -EBUSY;
-}
-
-static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+static int vp_request_vectors(struct virtio_device *vdev, int nvectors,
+ bool per_vq_vectors)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
const char *name = dev_name(&vp_dev->vdev.dev);
unsigned i, v;
int err = -ENOMEM;
- /* We want at most one vector per queue and one for config changes.
- * Fallback to separate vectors for config and a shared for queues.
- * Finally fall back to regular interrupts. */
- int options[] = { max_vqs + 1, 2 };
- int nvectors = max(options[0], options[1]);
- vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
- GFP_KERNEL);
- if (!vp_dev->msix_entries)
- goto error_entries;
- vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
- GFP_KERNEL);
- if (!vp_dev->msix_names)
- goto error_names;
-
- for (i = 0; i < nvectors; ++i)
- vp_dev->msix_entries[i].entry = i;
-
- err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
- options, ARRAY_SIZE(options));
- if (err < 0) {
- /* Can't allocate enough MSI-X vectors, use regular interrupt */
+ if (!nvectors) {
+ /* Can't allocate MSI-X vectors, use regular interrupt */
vp_dev->msix_vectors = 0;
err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
IRQF_SHARED, name, vp_dev);
if (err)
- goto error_irq;
+ return err;
vp_dev->intx_enabled = 1;
- } else {
- vp_dev->msix_vectors = err;
- vp_dev->msix_enabled = 1;
-
- /* Set the vector used for configuration */
- v = vp_dev->msix_used_vectors;
- snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
- "%s-config", name);
- err = request_irq(vp_dev->msix_entries[v].vector,
- vp_config_changed, 0, vp_dev->msix_names[v],
- vp_dev);
- if (err)
- goto error_irq;
- ++vp_dev->msix_used_vectors;
-
- iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- /* Verify we had enough resources to assign the vector */
- v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
- if (v == VIRTIO_MSI_NO_VECTOR) {
- err = -EBUSY;
- goto error_irq;
- }
+ return 0;
}
- if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+ vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
+ GFP_KERNEL);
+ if (!vp_dev->msix_entries)
+ goto error;
+ vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
+ GFP_KERNEL);
+ if (!vp_dev->msix_names)
+ goto error;
+
+ for (i = 0; i < nvectors; ++i)
+ vp_dev->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors);
+ if (err > 0)
+ err = -ENOSPC;
+ if (err)
+ goto error;
+ vp_dev->msix_vectors = nvectors;
+ vp_dev->msix_enabled = 1;
+
+ /* Set the vector used for configuration */
+ v = vp_dev->msix_used_vectors;
+ snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+ "%s-config", name);
+ err = request_irq(vp_dev->msix_entries[v].vector,
+ vp_config_changed, 0, vp_dev->msix_names[v],
+ vp_dev);
+ if (err)
+ goto error;
+ ++vp_dev->msix_used_vectors;
+
+ iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+ /* Verify we had enough resources to assign the vector */
+ v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+ if (v == VIRTIO_MSI_NO_VECTOR) {
+ err = -EBUSY;
+ goto error;
+ }
+
+ if (!per_vq_vectors) {
/* Shared vector for all VQs */
v = vp_dev->msix_used_vectors;
snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
@@ -349,28 +347,25 @@
vp_vring_interrupt, 0, vp_dev->msix_names[v],
vp_dev);
if (err)
- goto error_irq;
+ goto error;
++vp_dev->msix_used_vectors;
}
return 0;
-error_irq:
+error:
vp_free_vectors(vdev);
- kfree(vp_dev->msix_names);
-error_names:
- kfree(vp_dev->msix_entries);
-error_entries:
return err;
}
static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
void (*callback)(struct virtqueue *vq),
- const char *name)
+ const char *name,
+ u16 vector)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
struct virtio_pci_vq_info *info;
struct virtqueue *vq;
unsigned long flags, size;
- u16 num, vector;
+ u16 num;
int err;
/* Select the queue we're interested in */
@@ -389,7 +384,7 @@
info->queue_index = index;
info->num = num;
- info->vector = VIRTIO_MSI_NO_VECTOR;
+ info->vector = vector;
size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -413,22 +408,7 @@
vq->priv = info;
info->vq = vq;
- /* allocate per-vq vector if available and necessary */
- if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
- vector = vp_dev->msix_used_vectors;
- snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
- "%s-%s", dev_name(&vp_dev->vdev.dev), name);
- err = request_irq(vp_dev->msix_entries[vector].vector,
- vring_interrupt, 0,
- vp_dev->msix_names[vector], vq);
- if (err)
- goto out_request_irq;
- info->vector = vector;
- ++vp_dev->msix_used_vectors;
- } else
- vector = VP_MSIX_VQ_VECTOR;
-
- if (callback && vp_dev->msix_enabled) {
+ if (vector != VIRTIO_MSI_NO_VECTOR) {
iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
if (vector == VIRTIO_MSI_NO_VECTOR) {
@@ -444,11 +424,6 @@
return vq;
out_assign:
- if (info->vector != VIRTIO_MSI_NO_VECTOR) {
- free_irq(vp_dev->msix_entries[info->vector].vector, vq);
- --vp_dev->msix_used_vectors;
- }
-out_request_irq:
vring_del_virtqueue(vq);
out_activate_queue:
iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
@@ -462,13 +437,14 @@
{
struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
struct virtio_pci_vq_info *info = vq->priv;
- unsigned long size;
+ unsigned long flags, size;
+
+ spin_lock_irqsave(&vp_dev->lock, flags);
+ list_del(&info->node);
+ spin_unlock_irqrestore(&vp_dev->lock, flags);
iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
- if (info->vector != VIRTIO_MSI_NO_VECTOR)
- free_irq(vp_dev->msix_entries[info->vector].vector, vq);
-
if (vp_dev->msix_enabled) {
iowrite16(VIRTIO_MSI_NO_VECTOR,
vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
@@ -489,14 +465,72 @@
/* the config->del_vqs() implementation */
static void vp_del_vqs(struct virtio_device *vdev)
{
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
struct virtqueue *vq, *n;
+ struct virtio_pci_vq_info *info;
- list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+ list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+ info = vq->priv;
+ if (vp_dev->per_vq_vectors)
+ free_irq(vp_dev->msix_entries[info->vector].vector, vq);
vp_del_vq(vq);
+ }
+ vp_dev->per_vq_vectors = false;
vp_free_vectors(vdev);
}
+static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[],
+ int nvectors,
+ bool per_vq_vectors)
+{
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+ u16 vector;
+ int i, err, allocated_vectors;
+
+ err = vp_request_vectors(vdev, nvectors, per_vq_vectors);
+ if (err)
+ goto error_request;
+
+ vp_dev->per_vq_vectors = per_vq_vectors;
+ allocated_vectors = vp_dev->msix_used_vectors;
+ for (i = 0; i < nvqs; ++i) {
+ if (!callbacks[i] || !vp_dev->msix_enabled)
+ vector = VIRTIO_MSI_NO_VECTOR;
+ else if (vp_dev->per_vq_vectors)
+ vector = allocated_vectors++;
+ else
+ vector = VP_MSIX_VQ_VECTOR;
+ vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector);
+ if (IS_ERR(vqs[i])) {
+ err = PTR_ERR(vqs[i]);
+ goto error_find;
+ }
+ /* allocate per-vq irq if available and necessary */
+ if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) {
+ snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+ "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]);
+ err = request_irq(vp_dev->msix_entries[vector].vector,
+ vring_interrupt, 0,
+ vp_dev->msix_names[vector], vqs[i]);
+ if (err) {
+ vp_del_vq(vqs[i]);
+ goto error_find;
+ }
+ }
+ }
+ return 0;
+
+error_find:
+ vp_del_vqs(vdev);
+
+error_request:
+ return err;
+}
+
/* the config->find_vqs() implementation */
static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
struct virtqueue *vqs[],
@@ -504,29 +538,27 @@
const char *names[])
{
int vectors = 0;
- int i, err;
+ int i, uninitialized_var(err);
/* How many vectors would we like? */
for (i = 0; i < nvqs; ++i)
if (callbacks[i])
++vectors;
- err = vp_request_vectors(vdev, vectors);
- if (err)
- goto error_request;
-
- for (i = 0; i < nvqs; ++i) {
- vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
- if (IS_ERR(vqs[i]))
- goto error_find;
- }
- return 0;
-
-error_find:
- vp_del_vqs(vdev);
-
-error_request:
- return PTR_ERR(vqs[i]);
+ /* We want at most one vector per queue and one for config changes. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ vectors + 1, true);
+ if (!err)
+ return 0;
+ /* Fallback to separate vectors for config and a shared for queues. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ 2, false);
+ if (!err)
+ return 0;
+ /* Finally fall back to regular interrupts. */
+ err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+ 0, false);
+ return err;
}
static struct virtio_config_ops virtio_pci_config_ops = {
@@ -669,7 +701,7 @@
err = pci_register_driver(&virtio_pci_driver);
if (err)
- device_unregister(virtio_pci_root);
+ root_device_unregister(virtio_pci_root);
return err;
}
diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig
index f654221..a9efb16 100644
--- a/drivers/vlynq/Kconfig
+++ b/drivers/vlynq/Kconfig
@@ -13,7 +13,7 @@
config VLYNQ_DEBUG
bool "VLYNQ bus debug"
- depends on VLYNQ && KERNEL_DEBUG
+ depends on VLYNQ && DEBUG_KERNEL
help
Turn on VLYNQ bus debugging.
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
index 7335433..f05d2a3 100644
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -76,7 +76,7 @@
u32 int_device[8];
};
-#ifdef VLYNQ_DEBUG
+#ifdef CONFIG_VLYNQ_DEBUG
static void vlynq_dump_regs(struct vlynq_device *dev)
{
int i;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index a7e3b70..0d92969 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -687,6 +687,7 @@
if (hdq_data->hdq_usecount) {
dev_dbg(&pdev->dev, "removed when use count is not zero\n");
+ mutex_unlock(&hdq_data->hdq_mutex);
return -EBUSY;
}
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 5c7011c..751c003 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -161,7 +161,7 @@
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
- int new_value, retval = -EINVAL;;
+ int new_value, retval = -EINVAL;
switch (cmd) {
case WDIOC_GETSUPPORT:
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index fecb307..aec7cef 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -18,6 +18,7 @@
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#define DRV_NAME "WDOG COH 901 327"
@@ -92,6 +93,8 @@
static void coh901327_enable(u16 timeout)
{
u16 val;
+ unsigned long freq;
+ unsigned long delay_ns;
clk_enable(clk);
/* Restart timer if it is disabled */
@@ -102,6 +105,14 @@
/* Acknowledge any pending interrupt so it doesn't just fire off */
writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
virtbase + U300_WDOG_IER);
+ /*
+ * The interrupt is cleared in the 32 kHz clock domain.
+ * Wait 3 32 kHz cycles for it to take effect
+ */
+ freq = clk_get_rate(clk);
+ delay_ns = (1000000000 + freq - 1) / freq; /* Freq to ns and round up */
+ delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+ ndelay(delay_ns);
/* Enable the watchdog interrupt */
writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
/* Activate the watchdog timer */
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index e9f950f..cdd55e0 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -29,6 +29,7 @@
#include <linux/watchdog.h>
#include <linux/timer.h>
#include <linux/uaccess.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#define WDT_VERSION "0.3"
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 00b03eb..e1c8276 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -66,7 +66,7 @@
static inline void ks8695_wdt_start(void)
{
unsigned long tmcon;
- unsigned long tval = wdt_time * CLOCK_TICK_RATE;
+ unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
spin_lock(&ks8695_lock);
/* disable timer0 */
@@ -103,7 +103,7 @@
static int ks8695_wdt_settimeout(int new_time)
{
/*
- * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+ * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
* 65536 / 0.256 = 256 seconds.
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index ee1caae..0162454 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -38,7 +38,7 @@
static unsigned long oscr_freq;
static unsigned long sa1100wdt_users;
-static int pre_margin;
+static unsigned int pre_margin;
static int boot_status;
/*
@@ -84,6 +84,7 @@
.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT
| WDIOF_KEEPALIVEPING,
.identity = "SA1100/PXA255 Watchdog",
+ .firmware_version = 1,
};
static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
@@ -118,7 +119,7 @@
if (ret)
break;
- if (time <= 0 || time > 255) {
+ if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
ret = -EINVAL;
break;
}
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 916890a..f201acc 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -89,6 +89,11 @@
c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
outb_p(0x2b, WDT_EFER);
outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
+ } else if (c == 0x88) { /* W83627EHF */
+ outb_p(0x2d, WDT_EFER); /* select GPIO5 */
+ c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
+ outb_p(0x2d, WDT_EFER);
+ outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
}
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index 883b5f7..a6c12de 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -149,8 +149,10 @@
{
spin_lock(&io_lock);
- if (w83697ug_select_wd_register() < 0)
+ if (w83697ug_select_wd_register() < 0) {
+ spin_unlock(&io_lock);
return;
+ }
outb_p(0xF4, WDT_EFER); /* Select CRF4 */
outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a4fe7a3..3bde56b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -218,16 +218,14 @@
*/
static int wdrtas_get_temperature(void)
{
- long result;
+ int result;
int temperature = 0;
- result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
- (void *)__pa(&temperature),
- WDRTAS_THERMAL_SENSOR, 0);
+ result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
if (result < 0)
printk(KERN_WARNING "wdrtas: reading the thermal sensor "
- "faild: %li\n", result);
+ "failed: %i\n", result);
else
temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 891d2e9..abad71b 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -927,9 +927,9 @@
void __init xen_init_IRQ(void)
{
int i;
- size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s);
- cpu_evtchn_mask_p = alloc_bootmem(size);
+ cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
+ GFP_KERNEL);
BUG_ON(cpu_evtchn_mask_p == NULL);
init_evtchn_cpu_bindings();
diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c
index 6fcb1e7..9282828 100644
--- a/fs/9p/vfs_addr.c
+++ b/fs/9p/vfs_addr.c
@@ -57,7 +57,7 @@
buffer = kmap(page);
offset = page_offset(page);
- retval = v9fs_file_readn(filp, buffer, NULL, offset, PAGE_CACHE_SIZE);
+ retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
if (retval < 0)
goto done;
diff --git a/fs/Kconfig b/fs/Kconfig
index a97263b..0e7da7b 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -186,32 +186,7 @@
source "fs/sysv/Kconfig"
source "fs/ufs/Kconfig"
source "fs/exofs/Kconfig"
-
-config NILFS2_FS
- tristate "NILFS2 file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- select CRC32
- help
- NILFS2 is a log-structured file system (LFS) supporting continuous
- snapshotting. In addition to versioning capability of the entire
- file system, users can even restore files mistakenly overwritten or
- destroyed just a few seconds ago. Since this file system can keep
- consistency like conventional LFS, it achieves quick recovery after
- system crashes.
-
- NILFS2 creates a number of checkpoints every few seconds or per
- synchronous write basis (unless there is no change). Users can
- select significant versions among continuously created checkpoints,
- and can change them into snapshots which will be preserved for long
- periods until they are changed back to checkpoints. Each
- snapshot is mountable as a read-only file system concurrently with
- its writable mount, and this feature is convenient for online backup.
-
- Some features including atime, extended attributes, and POSIX ACLs,
- are not supported yet.
-
- To compile this file system support as a module, choose M here: the
- module will be called nilfs2. If unsure, say N.
+source "fs/nilfs2/Kconfig"
endif # MISC_FILESYSTEMS
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index aad92f0..6910a98 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -13,6 +13,7 @@
#include <linux/parser.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/statfs.h>
#include "adfs.h"
#include "dir_f.h"
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 9bd7577..88067f3 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -564,7 +564,7 @@
static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
{
struct afs_vnode *vnode, *dir;
- struct afs_fid fid;
+ struct afs_fid uninitialized_var(fid);
struct dentry *parent;
struct key *key;
void *dir_version;
diff --git a/fs/afs/flock.c b/fs/afs/flock.c
index 210acaf..3ff8bdd 100644
--- a/fs/afs/flock.c
+++ b/fs/afs/flock.c
@@ -432,7 +432,6 @@
list_del_init(&fl->fl_u.afs.link);
if (list_empty(&vnode->granted_locks))
afs_defer_unlock(vnode, key);
- spin_unlock(&vnode->lock);
goto abort_attempt;
}
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index c52be53..5ffb570 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -17,7 +17,6 @@
#include <linux/pagemap.h>
#include <linux/mount.h>
#include <linux/namei.h>
-#include <linux/mnt_namespace.h>
#include "internal.h"
diff --git a/fs/afs/super.c b/fs/afs/super.c
index ad0514d..e1ea1c2 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/parser.h>
diff --git a/fs/aio.c b/fs/aio.c
index 76da125..d065b2c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -485,6 +485,8 @@
{
assert_spin_locked(&ctx->ctx_lock);
+ if (req->ki_eventfd != NULL)
+ eventfd_ctx_put(req->ki_eventfd);
if (req->ki_dtor)
req->ki_dtor(req);
if (req->ki_iovec != &req->ki_inline_vec)
@@ -509,8 +511,6 @@
/* Complete the fput(s) */
if (req->ki_filp != NULL)
__fput(req->ki_filp);
- if (req->ki_eventfd != NULL)
- __fput(req->ki_eventfd);
/* Link the iocb into the context's free list */
spin_lock_irq(&ctx->ctx_lock);
@@ -528,8 +528,6 @@
*/
static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
{
- int schedule_putreq = 0;
-
dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
req, atomic_long_read(&req->ki_filp->f_count));
@@ -549,24 +547,16 @@
* we would not be holding the last reference to the file*, so
* this function will be executed w/out any aio kthread wakeup.
*/
- if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
- schedule_putreq++;
- else
- req->ki_filp = NULL;
- if (req->ki_eventfd != NULL) {
- if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
- schedule_putreq++;
- else
- req->ki_eventfd = NULL;
- }
- if (unlikely(schedule_putreq)) {
+ if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
get_ioctx(ctx);
spin_lock(&fput_lock);
list_add(&req->ki_list, &fput_head);
spin_unlock(&fput_lock);
queue_work(aio_wq, &fput_work);
- } else
+ } else {
+ req->ki_filp = NULL;
really_put_req(ctx, req);
+ }
return 1;
}
@@ -1622,7 +1612,7 @@
* an eventfd() fd, and will be signaled for each completed
* event using the eventfd_signal() function.
*/
- req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
+ req->ki_eventfd = eventfd_ctx_fdget((int) iocb->aio_resfd);
if (IS_ERR(req->ki_eventfd)) {
ret = PTR_ERR(req->ki_eventfd);
req->ki_eventfd = NULL;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index f3da2eb..00bf8fc 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -19,7 +19,6 @@
#include <linux/sched.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
-#include <linux/smp_lock.h>
#include <linux/magic.h>
#include <linux/dcache.h>
#include <linux/uaccess.h>
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 54bd07d..1e41aad 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -8,7 +8,6 @@
#include <linux/time.h>
#include <linux/string.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/sched.h>
#include "bfs.h"
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 6a02126..88b9a3f 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -11,7 +11,6 @@
#include <linux/fs.h>
#include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
#include "bfs.h"
#undef DEBUG
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 9fa212b0..b7c1603 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1522,11 +1522,11 @@
info->thread = NULL;
psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
- fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
-
if (psinfo == NULL)
return 0;
+ fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
+
/*
* Figure out how many notes we're going to need for each thread.
*/
@@ -1929,7 +1929,10 @@
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
if (!elf)
goto out;
-
+ /*
+ * The number of segs are recored into ELF header as 16bit value.
+ * Please check DEFAULT_MAX_MAP_COUNT definition when you modify here.
+ */
segs = current->mm->map_count;
#ifdef ELF_CORE_EXTRA_PHDRS
segs += ELF_CORE_EXTRA_PHDRS;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 697f6b5..e92f229 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -828,15 +828,22 @@
if (IS_ERR(bprm.file))
return res;
+ bprm.cred = prepare_exec_creds();
+ res = -ENOMEM;
+ if (!bprm.cred)
+ goto out;
+
res = prepare_binprm(&bprm);
if (res <= (unsigned long)-4096)
res = load_flat_file(&bprm, libs, id, NULL);
- if (bprm.file) {
- allow_write_access(bprm.file);
- fput(bprm.file);
- bprm.file = NULL;
- }
+
+ abort_creds(bprm.cred);
+
+out:
+ allow_write_access(bprm.file);
+ fput(bprm.file);
+
return(res);
}
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 31c46a2..49a34e7 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -1,7 +1,7 @@
/*
* bio-integrity.c - bio data integrity extensions
*
- * Copyright (C) 2007, 2008 Oracle Corporation
+ * Copyright (C) 2007, 2008, 2009 Oracle Corporation
* Written by: Martin K. Petersen <martin.petersen@oracle.com>
*
* This program is free software; you can redistribute it and/or
@@ -25,11 +25,94 @@
#include <linux/bio.h>
#include <linux/workqueue.h>
-static struct kmem_cache *bio_integrity_slab __read_mostly;
-static mempool_t *bio_integrity_pool;
-static struct bio_set *integrity_bio_set;
+struct integrity_slab {
+ struct kmem_cache *slab;
+ unsigned short nr_vecs;
+ char name[8];
+};
+
+#define IS(x) { .nr_vecs = x, .name = "bip-"__stringify(x) }
+struct integrity_slab bip_slab[BIOVEC_NR_POOLS] __read_mostly = {
+ IS(1), IS(4), IS(16), IS(64), IS(128), IS(BIO_MAX_PAGES),
+};
+#undef IS
+
static struct workqueue_struct *kintegrityd_wq;
+static inline unsigned int vecs_to_idx(unsigned int nr)
+{
+ switch (nr) {
+ case 1:
+ return 0;
+ case 2 ... 4:
+ return 1;
+ case 5 ... 16:
+ return 2;
+ case 17 ... 64:
+ return 3;
+ case 65 ... 128:
+ return 4;
+ case 129 ... BIO_MAX_PAGES:
+ return 5;
+ default:
+ BUG();
+ }
+}
+
+static inline int use_bip_pool(unsigned int idx)
+{
+ if (idx == BIOVEC_NR_POOLS)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * bio_integrity_alloc_bioset - Allocate integrity payload and attach it to bio
+ * @bio: bio to attach integrity metadata to
+ * @gfp_mask: Memory allocation mask
+ * @nr_vecs: Number of integrity metadata scatter-gather elements
+ * @bs: bio_set to allocate from
+ *
+ * Description: This function prepares a bio for attaching integrity
+ * metadata. nr_vecs specifies the maximum number of pages containing
+ * integrity metadata that can be attached.
+ */
+struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio,
+ gfp_t gfp_mask,
+ unsigned int nr_vecs,
+ struct bio_set *bs)
+{
+ struct bio_integrity_payload *bip;
+ unsigned int idx = vecs_to_idx(nr_vecs);
+
+ BUG_ON(bio == NULL);
+ bip = NULL;
+
+ /* Lower order allocations come straight from slab */
+ if (!use_bip_pool(idx))
+ bip = kmem_cache_alloc(bip_slab[idx].slab, gfp_mask);
+
+ /* Use mempool if lower order alloc failed or max vecs were requested */
+ if (bip == NULL) {
+ bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
+
+ if (unlikely(bip == NULL)) {
+ printk(KERN_ERR "%s: could not alloc bip\n", __func__);
+ return NULL;
+ }
+ }
+
+ memset(bip, 0, sizeof(*bip));
+
+ bip->bip_slab = idx;
+ bip->bip_bio = bio;
+ bio->bi_integrity = bip;
+
+ return bip;
+}
+EXPORT_SYMBOL(bio_integrity_alloc_bioset);
+
/**
* bio_integrity_alloc - Allocate integrity payload and attach it to bio
* @bio: bio to attach integrity metadata to
@@ -44,44 +127,19 @@
gfp_t gfp_mask,
unsigned int nr_vecs)
{
- struct bio_integrity_payload *bip;
- struct bio_vec *iv;
- unsigned long idx;
-
- BUG_ON(bio == NULL);
-
- bip = mempool_alloc(bio_integrity_pool, gfp_mask);
- if (unlikely(bip == NULL)) {
- printk(KERN_ERR "%s: could not alloc bip\n", __func__);
- return NULL;
- }
-
- memset(bip, 0, sizeof(*bip));
-
- iv = bvec_alloc_bs(gfp_mask, nr_vecs, &idx, integrity_bio_set);
- if (unlikely(iv == NULL)) {
- printk(KERN_ERR "%s: could not alloc bip_vec\n", __func__);
- mempool_free(bip, bio_integrity_pool);
- return NULL;
- }
-
- bip->bip_pool = idx;
- bip->bip_vec = iv;
- bip->bip_bio = bio;
- bio->bi_integrity = bip;
-
- return bip;
+ return bio_integrity_alloc_bioset(bio, gfp_mask, nr_vecs, fs_bio_set);
}
EXPORT_SYMBOL(bio_integrity_alloc);
/**
* bio_integrity_free - Free bio integrity payload
* @bio: bio containing bip to be freed
+ * @bs: bio_set this bio was allocated from
*
* Description: Used to free the integrity portion of a bio. Usually
* called from bio_free().
*/
-void bio_integrity_free(struct bio *bio)
+void bio_integrity_free(struct bio *bio, struct bio_set *bs)
{
struct bio_integrity_payload *bip = bio->bi_integrity;
@@ -92,8 +150,10 @@
&& bip->bip_buf != NULL)
kfree(bip->bip_buf);
- bvec_free_bs(integrity_bio_set, bip->bip_vec, bip->bip_pool);
- mempool_free(bip, bio_integrity_pool);
+ if (use_bip_pool(bip->bip_slab))
+ mempool_free(bip, bs->bio_integrity_pool);
+ else
+ kmem_cache_free(bip_slab[bip->bip_slab].slab, bip);
bio->bi_integrity = NULL;
}
@@ -114,7 +174,7 @@
struct bio_integrity_payload *bip = bio->bi_integrity;
struct bio_vec *iv;
- if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_pool)) {
+ if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) {
printk(KERN_ERR "%s: bip_vec full\n", __func__);
return 0;
}
@@ -647,8 +707,8 @@
bp->iv1 = bip->bip_vec[0];
bp->iv2 = bip->bip_vec[0];
- bp->bip1.bip_vec = &bp->iv1;
- bp->bip2.bip_vec = &bp->iv2;
+ bp->bip1.bip_vec[0] = bp->iv1;
+ bp->bip2.bip_vec[0] = bp->iv2;
bp->iv1.bv_len = sectors * bi->tuple_size;
bp->iv2.bv_offset += sectors * bi->tuple_size;
@@ -667,17 +727,19 @@
* @bio: New bio
* @bio_src: Original bio
* @gfp_mask: Memory allocation mask
+ * @bs: bio_set to allocate bip from
*
* Description: Called to allocate a bip when cloning a bio
*/
-int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask)
+int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+ gfp_t gfp_mask, struct bio_set *bs)
{
struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
struct bio_integrity_payload *bip;
BUG_ON(bip_src == NULL);
- bip = bio_integrity_alloc(bio, gfp_mask, bip_src->bip_vcnt);
+ bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
if (bip == NULL)
return -EIO;
@@ -693,25 +755,43 @@
}
EXPORT_SYMBOL(bio_integrity_clone);
-static int __init bio_integrity_init(void)
+int bioset_integrity_create(struct bio_set *bs, int pool_size)
{
- kintegrityd_wq = create_workqueue("kintegrityd");
+ unsigned int max_slab = vecs_to_idx(BIO_MAX_PAGES);
- if (!kintegrityd_wq)
- panic("Failed to create kintegrityd\n");
+ bs->bio_integrity_pool =
+ mempool_create_slab_pool(pool_size, bip_slab[max_slab].slab);
- bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC);
-
- bio_integrity_pool = mempool_create_slab_pool(BIO_POOL_SIZE,
- bio_integrity_slab);
- if (!bio_integrity_pool)
- panic("bio_integrity: can't allocate bip pool\n");
-
- integrity_bio_set = bioset_create(BIO_POOL_SIZE, 0);
- if (!integrity_bio_set)
- panic("bio_integrity: can't allocate bio_set\n");
+ if (!bs->bio_integrity_pool)
+ return -1;
return 0;
}
-subsys_initcall(bio_integrity_init);
+EXPORT_SYMBOL(bioset_integrity_create);
+
+void bioset_integrity_free(struct bio_set *bs)
+{
+ if (bs->bio_integrity_pool)
+ mempool_destroy(bs->bio_integrity_pool);
+}
+EXPORT_SYMBOL(bioset_integrity_free);
+
+void __init bio_integrity_init(void)
+{
+ unsigned int i;
+
+ kintegrityd_wq = create_workqueue("kintegrityd");
+ if (!kintegrityd_wq)
+ panic("Failed to create kintegrityd\n");
+
+ for (i = 0 ; i < BIOVEC_NR_POOLS ; i++) {
+ unsigned int size;
+
+ size = sizeof(struct bio_integrity_payload)
+ + bip_slab[i].nr_vecs * sizeof(struct bio_vec);
+
+ bip_slab[i].slab =
+ kmem_cache_create(bip_slab[i].name, size, 0,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+ }
+}
diff --git a/fs/bio.c b/fs/bio.c
index 24c9140..7673800 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -238,7 +238,7 @@
bvec_free_bs(bs, bio->bi_io_vec, BIO_POOL_IDX(bio));
if (bio_integrity(bio))
- bio_integrity_free(bio);
+ bio_integrity_free(bio, bs);
/*
* If we have front padding, adjust the bio pointer before freeing
@@ -341,7 +341,7 @@
static void bio_kmalloc_destructor(struct bio *bio)
{
if (bio_integrity(bio))
- bio_integrity_free(bio);
+ bio_integrity_free(bio, fs_bio_set);
kfree(bio);
}
@@ -472,7 +472,7 @@
if (bio_integrity(bio)) {
int ret;
- ret = bio_integrity_clone(b, bio, gfp_mask);
+ ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
if (ret < 0) {
bio_put(b);
@@ -705,14 +705,13 @@
}
static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
- struct sg_iovec *iov, int iov_count, int uncopy,
- int do_free_page)
+ struct sg_iovec *iov, int iov_count,
+ int to_user, int from_user, int do_free_page)
{
int ret = 0, i;
struct bio_vec *bvec;
int iov_idx = 0;
unsigned int iov_off = 0;
- int read = bio_data_dir(bio) == READ;
__bio_for_each_segment(bvec, bio, i, 0) {
char *bv_addr = page_address(bvec->bv_page);
@@ -727,13 +726,14 @@
iov_addr = iov[iov_idx].iov_base + iov_off;
if (!ret) {
- if (!read && !uncopy)
- ret = copy_from_user(bv_addr, iov_addr,
- bytes);
- if (read && uncopy)
+ if (to_user)
ret = copy_to_user(iov_addr, bv_addr,
bytes);
+ if (from_user)
+ ret = copy_from_user(bv_addr, iov_addr,
+ bytes);
+
if (ret)
ret = -EFAULT;
}
@@ -770,7 +770,8 @@
if (!bio_flagged(bio, BIO_NULL_MAPPED))
ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs,
- bmd->nr_sgvecs, 1, bmd->is_our_pages);
+ bmd->nr_sgvecs, bio_data_dir(bio) == READ,
+ 0, bmd->is_our_pages);
bio_free_map_data(bmd);
bio_put(bio);
return ret;
@@ -875,8 +876,9 @@
/*
* success
*/
- if (!write_to_vm && (!map_data || !map_data->null_mapped)) {
- ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0, 0);
+ if ((!write_to_vm && (!map_data || !map_data->null_mapped)) ||
+ (map_data && map_data->from_user)) {
+ ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0, 1, 0);
if (ret)
goto cleanup;
}
@@ -1539,6 +1541,7 @@
if (bs->bio_pool)
mempool_destroy(bs->bio_pool);
+ bioset_integrity_free(bs);
biovec_free_pools(bs);
bio_put_slab(bs);
@@ -1579,6 +1582,9 @@
if (!bs->bio_pool)
goto bad;
+ if (bioset_integrity_create(bs, pool_size))
+ goto bad;
+
if (!biovec_create_pools(bs, pool_size))
return bs;
@@ -1616,6 +1622,7 @@
if (!bio_slabs)
panic("bio: can't allocate bios\n");
+ bio_integrity_init();
biovec_init_slabs();
fs_bio_set = bioset_create(BIO_POOL_SIZE, 0);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 3a6d4fb..94dfda2 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -564,6 +564,16 @@
EXPORT_SYMBOL(bdget);
+/**
+ * bdgrab -- Grab a reference to an already referenced block device
+ * @bdev: Block device to grab a reference to.
+ */
+struct block_device *bdgrab(struct block_device *bdev)
+{
+ atomic_inc(&bdev->bd_inode->i_count);
+ return bdev;
+}
+
long nr_blockdev_pages(void)
{
struct block_device *bdev;
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 7f88628..019e8af 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -299,8 +299,8 @@
"btrfs-%s-%d", workers->name,
workers->num_workers + i);
if (IS_ERR(worker->task)) {
- kfree(worker);
ret = PTR_ERR(worker->task);
+ kfree(worker);
goto fail;
}
@@ -424,11 +424,11 @@
* list
*/
if (worker->idle) {
- spin_lock_irqsave(&worker->workers->lock, flags);
+ spin_lock(&worker->workers->lock);
worker->idle = 0;
list_move_tail(&worker->worker_list,
&worker->workers->worker_list);
- spin_unlock_irqrestore(&worker->workers->lock, flags);
+ spin_unlock(&worker->workers->lock);
}
if (!worker->working) {
wake = 1;
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index de1e2fd..9d8ba4d 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -26,7 +26,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mpage.h>
#include <linux/swap.h>
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 60a45f3..3fdcc05 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -557,19 +557,7 @@
btrfs_disk_key_to_cpu(&k1, disk);
- if (k1.objectid > k2->objectid)
- return 1;
- if (k1.objectid < k2->objectid)
- return -1;
- if (k1.type > k2->type)
- return 1;
- if (k1.type < k2->type)
- return -1;
- if (k1.offset > k2->offset)
- return 1;
- if (k1.offset < k2->offset)
- return -1;
- return 0;
+ return btrfs_comp_cpu_keys(&k1, k2);
}
/*
@@ -1052,9 +1040,6 @@
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
return 0;
- if (btrfs_header_nritems(mid) > 2)
- return 0;
-
if (btrfs_header_nritems(mid) < 2)
err_on_enospc = 1;
@@ -1701,6 +1686,7 @@
struct extent_buffer *b;
int slot;
int ret;
+ int err;
int level;
int lowest_unlock = 1;
u8 lowest_level = 0;
@@ -1737,8 +1723,6 @@
p->locks[level] = 1;
if (cow) {
- int wret;
-
/*
* if we don't really need to cow this block
* then we don't want to set the path blocking,
@@ -1749,12 +1733,12 @@
btrfs_set_path_blocking(p);
- wret = btrfs_cow_block(trans, root, b,
- p->nodes[level + 1],
- p->slots[level + 1], &b);
- if (wret) {
+ err = btrfs_cow_block(trans, root, b,
+ p->nodes[level + 1],
+ p->slots[level + 1], &b);
+ if (err) {
free_extent_buffer(b);
- ret = wret;
+ ret = err;
goto done;
}
}
@@ -1793,41 +1777,45 @@
ret = bin_search(b, key, level, &slot);
if (level != 0) {
- if (ret && slot > 0)
+ int dec = 0;
+ if (ret && slot > 0) {
+ dec = 1;
slot -= 1;
+ }
p->slots[level] = slot;
- ret = setup_nodes_for_search(trans, root, p, b, level,
+ err = setup_nodes_for_search(trans, root, p, b, level,
ins_len);
- if (ret == -EAGAIN)
+ if (err == -EAGAIN)
goto again;
- else if (ret)
+ if (err) {
+ ret = err;
goto done;
+ }
b = p->nodes[level];
slot = p->slots[level];
unlock_up(p, level, lowest_unlock);
- /* this is only true while dropping a snapshot */
if (level == lowest_level) {
- ret = 0;
+ if (dec)
+ p->slots[level]++;
goto done;
}
- ret = read_block_for_search(trans, root, p,
+ err = read_block_for_search(trans, root, p,
&b, level, slot, key);
- if (ret == -EAGAIN)
+ if (err == -EAGAIN)
goto again;
-
- if (ret == -EIO)
+ if (err) {
+ ret = err;
goto done;
+ }
if (!p->skip_locking) {
- int lret;
-
btrfs_clear_path_blocking(p, NULL);
- lret = btrfs_try_spin_lock(b);
+ err = btrfs_try_spin_lock(b);
- if (!lret) {
+ if (!err) {
btrfs_set_path_blocking(p);
btrfs_tree_lock(b);
btrfs_clear_path_blocking(p, b);
@@ -1837,16 +1825,14 @@
p->slots[level] = slot;
if (ins_len > 0 &&
btrfs_leaf_free_space(root, b) < ins_len) {
- int sret;
-
btrfs_set_path_blocking(p);
- sret = split_leaf(trans, root, key,
- p, ins_len, ret == 0);
+ err = split_leaf(trans, root, key,
+ p, ins_len, ret == 0);
btrfs_clear_path_blocking(p, NULL);
- BUG_ON(sret > 0);
- if (sret) {
- ret = sret;
+ BUG_ON(err > 0);
+ if (err) {
+ ret = err;
goto done;
}
}
@@ -3807,7 +3793,7 @@
}
/* delete the leaf if it is mostly empty */
- if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
+ if (used < BTRFS_LEAF_DATA_SIZE(root) / 3) {
/* push_leaf_left fixes the path.
* make sure the path still points to our leaf
* for possible call to del_ptr below
@@ -4042,10 +4028,9 @@
* calling this function.
*/
int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
- struct btrfs_key *key, int lowest_level,
+ struct btrfs_key *key, int level,
int cache_only, u64 min_trans)
{
- int level = lowest_level;
int slot;
struct extent_buffer *c;
@@ -4058,11 +4043,40 @@
c = path->nodes[level];
next:
if (slot >= btrfs_header_nritems(c)) {
- level++;
- if (level == BTRFS_MAX_LEVEL)
+ int ret;
+ int orig_lowest;
+ struct btrfs_key cur_key;
+ if (level + 1 >= BTRFS_MAX_LEVEL ||
+ !path->nodes[level + 1])
return 1;
- continue;
+
+ if (path->locks[level + 1]) {
+ level++;
+ continue;
+ }
+
+ slot = btrfs_header_nritems(c) - 1;
+ if (level == 0)
+ btrfs_item_key_to_cpu(c, &cur_key, slot);
+ else
+ btrfs_node_key_to_cpu(c, &cur_key, slot);
+
+ orig_lowest = path->lowest_level;
+ btrfs_release_path(root, path);
+ path->lowest_level = level;
+ ret = btrfs_search_slot(NULL, root, &cur_key, path,
+ 0, 0);
+ path->lowest_level = orig_lowest;
+ if (ret < 0)
+ return ret;
+
+ c = path->nodes[level];
+ slot = path->slots[level];
+ if (ret == 0)
+ slot++;
+ goto next;
}
+
if (level == 0)
btrfs_item_key_to_cpu(c, key, slot);
else {
@@ -4146,7 +4160,8 @@
* advance the path if there are now more items available.
*/
if (nritems > 0 && path->slots[0] < nritems - 1) {
- path->slots[0]++;
+ if (ret == 0)
+ path->slots[0]++;
ret = 0;
goto done;
}
@@ -4278,10 +4293,10 @@
path->slots[0]--;
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
- if (found_key.type == type)
- return 0;
if (found_key.objectid < min_objectid)
break;
+ if (found_key.type == type)
+ return 0;
if (found_key.objectid == min_objectid &&
found_key.type < type)
break;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 2779c2f..837435c 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -481,7 +481,7 @@
struct btrfs_extent_inline_ref {
u8 type;
- u64 offset;
+ __le64 offset;
} __attribute__ ((__packed__));
/* old style backrefs item */
@@ -689,6 +689,7 @@
struct list_head block_groups;
spinlock_t lock;
struct rw_semaphore groups_sem;
+ atomic_t caching_threads;
};
/*
@@ -707,6 +708,9 @@
/* first extent starting offset */
u64 window_start;
+ /* if this cluster simply points at a bitmap in the block group */
+ bool points_to_bitmap;
+
struct btrfs_block_group_cache *block_group;
/*
* when a cluster is allocated from a block group, we put the
@@ -716,24 +720,37 @@
struct list_head block_group_list;
};
+enum btrfs_caching_type {
+ BTRFS_CACHE_NO = 0,
+ BTRFS_CACHE_STARTED = 1,
+ BTRFS_CACHE_FINISHED = 2,
+};
+
struct btrfs_block_group_cache {
struct btrfs_key key;
struct btrfs_block_group_item item;
+ struct btrfs_fs_info *fs_info;
spinlock_t lock;
- struct mutex cache_mutex;
u64 pinned;
u64 reserved;
u64 flags;
- int cached;
+ u64 sectorsize;
+ int extents_thresh;
+ int free_extents;
+ int total_bitmaps;
int ro;
int dirty;
+ /* cache tracking stuff */
+ wait_queue_head_t caching_q;
+ int cached;
+
struct btrfs_space_info *space_info;
/* free space cache stuff */
spinlock_t tree_lock;
- struct rb_root free_space_bytes;
struct rb_root free_space_offset;
+ u64 free_space;
/* block group cache stuff */
struct rb_node cache_node;
@@ -808,6 +825,7 @@
struct mutex drop_mutex;
struct mutex volume_mutex;
struct mutex tree_reloc_mutex;
+ struct rw_semaphore extent_commit_sem;
/*
* this protects the ordered operations list only while we are
@@ -1988,6 +2006,7 @@
u64 bytes);
void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
u64 bytes);
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
int level, int *slot);
@@ -2074,8 +2093,7 @@
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
- *root);
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref);
int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *node,
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index d28d29c..e83be2e 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1639,6 +1639,7 @@
mutex_init(&fs_info->cleaner_mutex);
mutex_init(&fs_info->volume_mutex);
mutex_init(&fs_info->tree_reloc_mutex);
+ init_rwsem(&fs_info->extent_commit_sem);
btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
@@ -1799,6 +1800,11 @@
btrfs_super_chunk_root(disk_super),
blocksize, generation);
BUG_ON(!chunk_root->node);
+ if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
+ printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
+ sb->s_id);
+ goto fail_chunk_root;
+ }
btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
chunk_root->commit_root = btrfs_root_node(chunk_root);
@@ -1826,6 +1832,11 @@
blocksize, generation);
if (!tree_root->node)
goto fail_chunk_root;
+ if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+ printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
+ sb->s_id);
+ goto fail_tree_root;
+ }
btrfs_set_root_node(&tree_root->root_item, tree_root->node);
tree_root->commit_root = btrfs_root_node(tree_root);
@@ -2322,6 +2333,9 @@
printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
}
+ fs_info->closing = 2;
+ smp_mb();
+
if (fs_info->delalloc_bytes) {
printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
(unsigned long long)fs_info->delalloc_bytes);
@@ -2343,6 +2357,7 @@
free_extent_buffer(root->fs_info->csum_root->commit_root);
btrfs_free_block_groups(root->fs_info);
+ btrfs_free_pinned_extents(root->fs_info);
del_fs_roots(fs_info);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index edc7d20..72a2b9c 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -21,6 +21,7 @@
#include <linux/blkdev.h>
#include <linux/sort.h>
#include <linux/rcupdate.h>
+#include <linux/kthread.h>
#include "compat.h"
#include "hash.h"
#include "ctree.h"
@@ -61,6 +62,13 @@
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force);
+static noinline int
+block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+ smp_mb();
+ return cache->cached == BTRFS_CACHE_FINISHED;
+}
+
static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
{
return (cache->flags & bits) == bits;
@@ -146,20 +154,70 @@
}
/*
+ * We always set EXTENT_LOCKED for the super mirror extents so we don't
+ * overwrite them, so those bits need to be unset. Also, if we are unmounting
+ * with pinned extents still sitting there because we had a block group caching,
+ * we need to clear those now, since we are done.
+ */
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+{
+ u64 start, end, last = 0;
+ int ret;
+
+ while (1) {
+ ret = find_first_extent_bit(&info->pinned_extents, last,
+ &start, &end,
+ EXTENT_LOCKED|EXTENT_DIRTY);
+ if (ret)
+ break;
+
+ clear_extent_bits(&info->pinned_extents, start, end,
+ EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
+ last = end+1;
+ }
+}
+
+static int remove_sb_from_cache(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ u64 bytenr;
+ u64 *logical;
+ int stripe_len;
+ int i, nr, ret;
+
+ for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
+ bytenr = btrfs_sb_offset(i);
+ ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
+ cache->key.objectid, bytenr,
+ 0, &logical, &nr, &stripe_len);
+ BUG_ON(ret);
+ while (nr--) {
+ try_lock_extent(&fs_info->pinned_extents,
+ logical[nr],
+ logical[nr] + stripe_len - 1, GFP_NOFS);
+ }
+ kfree(logical);
+ }
+
+ return 0;
+}
+
+/*
* this is only called by cache_block_group, since we could have freed extents
* we need to check the pinned_extents for any extents that can't be used yet
* since their free space will be released as soon as the transaction commits.
*/
-static int add_new_free_space(struct btrfs_block_group_cache *block_group,
+static u64 add_new_free_space(struct btrfs_block_group_cache *block_group,
struct btrfs_fs_info *info, u64 start, u64 end)
{
- u64 extent_start, extent_end, size;
+ u64 extent_start, extent_end, size, total_added = 0;
int ret;
while (start < end) {
ret = find_first_extent_bit(&info->pinned_extents, start,
&extent_start, &extent_end,
- EXTENT_DIRTY);
+ EXTENT_DIRTY|EXTENT_LOCKED);
if (ret)
break;
@@ -167,6 +225,7 @@
start = extent_end + 1;
} else if (extent_start > start && extent_start < end) {
size = extent_start - start;
+ total_added += size;
ret = btrfs_add_free_space(block_group, start,
size);
BUG_ON(ret);
@@ -178,84 +237,93 @@
if (start < end) {
size = end - start;
+ total_added += size;
ret = btrfs_add_free_space(block_group, start, size);
BUG_ON(ret);
}
- return 0;
+ return total_added;
}
-static int remove_sb_from_cache(struct btrfs_root *root,
- struct btrfs_block_group_cache *cache)
+static int caching_kthread(void *data)
{
- u64 bytenr;
- u64 *logical;
- int stripe_len;
- int i, nr, ret;
-
- for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
- bytenr = btrfs_sb_offset(i);
- ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
- cache->key.objectid, bytenr, 0,
- &logical, &nr, &stripe_len);
- BUG_ON(ret);
- while (nr--) {
- btrfs_remove_free_space(cache, logical[nr],
- stripe_len);
- }
- kfree(logical);
- }
- return 0;
-}
-
-static int cache_block_group(struct btrfs_root *root,
- struct btrfs_block_group_cache *block_group)
-{
+ struct btrfs_block_group_cache *block_group = data;
+ struct btrfs_fs_info *fs_info = block_group->fs_info;
+ u64 last = 0;
struct btrfs_path *path;
int ret = 0;
struct btrfs_key key;
struct extent_buffer *leaf;
int slot;
- u64 last;
+ u64 total_found = 0;
- if (!block_group)
- return 0;
-
- root = root->fs_info->extent_root;
-
- if (block_group->cached)
- return 0;
+ BUG_ON(!fs_info);
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
- path->reada = 2;
+ atomic_inc(&block_group->space_info->caching_threads);
+ last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
/*
- * we get into deadlocks with paths held by callers of this function.
- * since the alloc_mutex is protecting things right now, just
- * skip the locking here
+ * We don't want to deadlock with somebody trying to allocate a new
+ * extent for the extent root while also trying to search the extent
+ * root to add free space. So we skip locking and search the commit
+ * root, since its read-only
*/
path->skip_locking = 1;
- last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+ path->search_commit_root = 1;
+ path->reada = 2;
+
key.objectid = last;
key.offset = 0;
btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+again:
+ /* need to make sure the commit_root doesn't disappear */
+ down_read(&fs_info->extent_commit_sem);
+
+ ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
goto err;
while (1) {
+ smp_mb();
+ if (block_group->fs_info->closing > 1) {
+ last = (u64)-1;
+ break;
+ }
+
leaf = path->nodes[0];
slot = path->slots[0];
if (slot >= btrfs_header_nritems(leaf)) {
- ret = btrfs_next_leaf(root, path);
+ ret = btrfs_next_leaf(fs_info->extent_root, path);
if (ret < 0)
goto err;
- if (ret == 0)
- continue;
- else
+ else if (ret)
break;
+
+ if (need_resched() ||
+ btrfs_transaction_in_commit(fs_info)) {
+ leaf = path->nodes[0];
+
+ /* this shouldn't happen, but if the
+ * leaf is empty just move on.
+ */
+ if (btrfs_header_nritems(leaf) == 0)
+ break;
+ /*
+ * we need to copy the key out so that
+ * we are sure the next search advances
+ * us forward in the btree.
+ */
+ btrfs_item_key_to_cpu(leaf, &key, 0);
+ btrfs_release_path(fs_info->extent_root, path);
+ up_read(&fs_info->extent_commit_sem);
+ schedule_timeout(1);
+ goto again;
+ }
+
+ continue;
}
btrfs_item_key_to_cpu(leaf, &key, slot);
if (key.objectid < block_group->key.objectid)
@@ -266,24 +334,59 @@
break;
if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
- add_new_free_space(block_group, root->fs_info, last,
- key.objectid);
-
+ total_found += add_new_free_space(block_group,
+ fs_info, last,
+ key.objectid);
last = key.objectid + key.offset;
}
+
+ if (total_found > (1024 * 1024 * 2)) {
+ total_found = 0;
+ wake_up(&block_group->caching_q);
+ }
next:
path->slots[0]++;
}
-
- add_new_free_space(block_group, root->fs_info, last,
- block_group->key.objectid +
- block_group->key.offset);
-
- block_group->cached = 1;
- remove_sb_from_cache(root, block_group);
ret = 0;
+
+ total_found += add_new_free_space(block_group, fs_info, last,
+ block_group->key.objectid +
+ block_group->key.offset);
+
+ spin_lock(&block_group->lock);
+ block_group->cached = BTRFS_CACHE_FINISHED;
+ spin_unlock(&block_group->lock);
+
err:
btrfs_free_path(path);
+ up_read(&fs_info->extent_commit_sem);
+ atomic_dec(&block_group->space_info->caching_threads);
+ wake_up(&block_group->caching_q);
+
+ return 0;
+}
+
+static int cache_block_group(struct btrfs_block_group_cache *cache)
+{
+ struct task_struct *tsk;
+ int ret = 0;
+
+ spin_lock(&cache->lock);
+ if (cache->cached != BTRFS_CACHE_NO) {
+ spin_unlock(&cache->lock);
+ return ret;
+ }
+ cache->cached = BTRFS_CACHE_STARTED;
+ spin_unlock(&cache->lock);
+
+ tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
+ cache->key.objectid);
+ if (IS_ERR(tsk)) {
+ ret = PTR_ERR(tsk);
+ printk(KERN_ERR "error running thread %d\n", ret);
+ BUG();
+ }
+
return ret;
}
@@ -990,15 +1093,13 @@
return type;
}
-static int find_next_key(struct btrfs_path *path, struct btrfs_key *key)
+static int find_next_key(struct btrfs_path *path, int level,
+ struct btrfs_key *key)
{
- int level;
- BUG_ON(!path->keep_locks);
- for (level = 0; level < BTRFS_MAX_LEVEL; level++) {
+ for (; level < BTRFS_MAX_LEVEL; level++) {
if (!path->nodes[level])
break;
- btrfs_assert_tree_locked(path->nodes[level]);
if (path->slots[level] + 1 >=
btrfs_header_nritems(path->nodes[level]))
continue;
@@ -1158,7 +1259,8 @@
* For simplicity, we just do not add new inline back
* ref if there is any kind of item for this block
*/
- if (find_next_key(path, &key) == 0 && key.objectid == bytenr &&
+ if (find_next_key(path, 0, &key) == 0 &&
+ key.objectid == bytenr &&
key.type < BTRFS_BLOCK_GROUP_ITEM_KEY) {
err = -EAGAIN;
goto out;
@@ -2388,13 +2490,29 @@
}
+static struct btrfs_block_group_cache *
+next_block_group(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ struct rb_node *node;
+ spin_lock(&root->fs_info->block_group_cache_lock);
+ node = rb_next(&cache->cache_node);
+ btrfs_put_block_group(cache);
+ if (node) {
+ cache = rb_entry(node, struct btrfs_block_group_cache,
+ cache_node);
+ atomic_inc(&cache->count);
+ } else
+ cache = NULL;
+ spin_unlock(&root->fs_info->block_group_cache_lock);
+ return cache;
+}
+
int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- struct btrfs_block_group_cache *cache, *entry;
- struct rb_node *n;
+ struct btrfs_block_group_cache *cache;
int err = 0;
- int werr = 0;
struct btrfs_path *path;
u64 last = 0;
@@ -2403,39 +2521,35 @@
return -ENOMEM;
while (1) {
- cache = NULL;
- spin_lock(&root->fs_info->block_group_cache_lock);
- for (n = rb_first(&root->fs_info->block_group_cache_tree);
- n; n = rb_next(n)) {
- entry = rb_entry(n, struct btrfs_block_group_cache,
- cache_node);
- if (entry->dirty) {
- cache = entry;
- break;
- }
+ if (last == 0) {
+ err = btrfs_run_delayed_refs(trans, root,
+ (unsigned long)-1);
+ BUG_ON(err);
}
- spin_unlock(&root->fs_info->block_group_cache_lock);
- if (!cache)
- break;
-
- cache->dirty = 0;
- last += cache->key.offset;
-
- err = write_one_cache_group(trans, root,
- path, cache);
- /*
- * if we fail to write the cache group, we want
- * to keep it marked dirty in hopes that a later
- * write will work
- */
- if (err) {
- werr = err;
+ cache = btrfs_lookup_first_block_group(root->fs_info, last);
+ while (cache) {
+ if (cache->dirty)
+ break;
+ cache = next_block_group(root, cache);
+ }
+ if (!cache) {
+ if (last == 0)
+ break;
+ last = 0;
continue;
}
+
+ cache->dirty = 0;
+ last = cache->key.objectid + cache->key.offset;
+
+ err = write_one_cache_group(trans, root, path, cache);
+ BUG_ON(err);
+ btrfs_put_block_group(cache);
}
+
btrfs_free_path(path);
- return werr;
+ return 0;
}
int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr)
@@ -2485,6 +2599,7 @@
found->force_alloc = 0;
*space_info = found;
list_add_rcu(&found->list, &info->space_info);
+ atomic_set(&found->caching_threads, 0);
return 0;
}
@@ -2697,7 +2812,7 @@
printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
", %llu bytes_used, %llu bytes_reserved, "
- "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+ "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
"%llu total\n", (unsigned long long)bytes,
(unsigned long long)data_sinfo->bytes_delalloc,
(unsigned long long)data_sinfo->bytes_used,
@@ -2948,13 +3063,9 @@
struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *fs_info = root->fs_info;
- if (pin) {
+ if (pin)
set_extent_dirty(&fs_info->pinned_extents,
bytenr, bytenr + num - 1, GFP_NOFS);
- } else {
- clear_extent_dirty(&fs_info->pinned_extents,
- bytenr, bytenr + num - 1, GFP_NOFS);
- }
while (num > 0) {
cache = btrfs_lookup_block_group(fs_info, bytenr);
@@ -2970,14 +3081,34 @@
spin_unlock(&cache->space_info->lock);
fs_info->total_pinned += len;
} else {
+ int unpin = 0;
+
+ /*
+ * in order to not race with the block group caching, we
+ * only want to unpin the extent if we are cached. If
+ * we aren't cached, we want to start async caching this
+ * block group so we can free the extent the next time
+ * around.
+ */
spin_lock(&cache->space_info->lock);
spin_lock(&cache->lock);
- cache->pinned -= len;
- cache->space_info->bytes_pinned -= len;
+ unpin = (cache->cached == BTRFS_CACHE_FINISHED);
+ if (likely(unpin)) {
+ cache->pinned -= len;
+ cache->space_info->bytes_pinned -= len;
+ fs_info->total_pinned -= len;
+ }
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
- fs_info->total_pinned -= len;
- if (cache->cached)
+
+ if (likely(unpin))
+ clear_extent_dirty(&fs_info->pinned_extents,
+ bytenr, bytenr + len -1,
+ GFP_NOFS);
+ else
+ cache_block_group(cache);
+
+ if (unpin)
btrfs_add_free_space(cache, bytenr, len);
}
btrfs_put_block_group(cache);
@@ -3031,6 +3162,7 @@
&start, &end, EXTENT_DIRTY);
if (ret)
break;
+
set_extent_dirty(copy, start, end, GFP_NOFS);
last = end + 1;
}
@@ -3059,6 +3191,7 @@
cond_resched();
}
+
return ret;
}
@@ -3437,6 +3570,45 @@
}
/*
+ * when we wait for progress in the block group caching, its because
+ * our allocation attempt failed at least once. So, we must sleep
+ * and let some progress happen before we try again.
+ *
+ * This function will sleep at least once waiting for new free space to
+ * show up, and then it will check the block group free space numbers
+ * for our min num_bytes. Another option is to have it go ahead
+ * and look in the rbtree for a free extent of a given size, but this
+ * is a good start.
+ */
+static noinline int
+wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
+ u64 num_bytes)
+{
+ DEFINE_WAIT(wait);
+
+ prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
+
+ if (block_group_cache_done(cache)) {
+ finish_wait(&cache->caching_q, &wait);
+ return 0;
+ }
+ schedule();
+ finish_wait(&cache->caching_q, &wait);
+
+ wait_event(cache->caching_q, block_group_cache_done(cache) ||
+ (cache->free_space >= num_bytes));
+ return 0;
+}
+
+enum btrfs_loop_type {
+ LOOP_CACHED_ONLY = 0,
+ LOOP_CACHING_NOWAIT = 1,
+ LOOP_CACHING_WAIT = 2,
+ LOOP_ALLOC_CHUNK = 3,
+ LOOP_NO_EMPTY_SIZE = 4,
+};
+
+/*
* walks the btree of allocated extents and find a hole of a given size.
* The key ins is changed to record the hole:
* ins->objectid == block start
@@ -3461,6 +3633,7 @@
struct btrfs_space_info *space_info;
int last_ptr_loop = 0;
int loop = 0;
+ bool found_uncached_bg = false;
WARN_ON(num_bytes < root->sectorsize);
btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
@@ -3492,15 +3665,18 @@
search_start = max(search_start, first_logical_byte(root, 0));
search_start = max(search_start, hint_byte);
- if (!last_ptr) {
+ if (!last_ptr)
empty_cluster = 0;
- loop = 1;
- }
if (search_start == hint_byte) {
block_group = btrfs_lookup_block_group(root->fs_info,
search_start);
- if (block_group && block_group_bits(block_group, data)) {
+ /*
+ * we don't want to use the block group if it doesn't match our
+ * allocation bits, or if its not cached.
+ */
+ if (block_group && block_group_bits(block_group, data) &&
+ block_group_cache_done(block_group)) {
down_read(&space_info->groups_sem);
if (list_empty(&block_group->list) ||
block_group->ro) {
@@ -3523,21 +3699,35 @@
down_read(&space_info->groups_sem);
list_for_each_entry(block_group, &space_info->block_groups, list) {
u64 offset;
+ int cached;
atomic_inc(&block_group->count);
search_start = block_group->key.objectid;
have_block_group:
- if (unlikely(!block_group->cached)) {
- mutex_lock(&block_group->cache_mutex);
- ret = cache_block_group(root, block_group);
- mutex_unlock(&block_group->cache_mutex);
- if (ret) {
- btrfs_put_block_group(block_group);
- break;
+ if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+ /*
+ * we want to start caching kthreads, but not too many
+ * right off the bat so we don't overwhelm the system,
+ * so only start them if there are less than 2 and we're
+ * in the initial allocation phase.
+ */
+ if (loop > LOOP_CACHING_NOWAIT ||
+ atomic_read(&space_info->caching_threads) < 2) {
+ ret = cache_block_group(block_group);
+ BUG_ON(ret);
}
}
+ cached = block_group_cache_done(block_group);
+ if (unlikely(!cached)) {
+ found_uncached_bg = true;
+
+ /* if we only want cached bgs, loop */
+ if (loop == LOOP_CACHED_ONLY)
+ goto loop;
+ }
+
if (unlikely(block_group->ro))
goto loop;
@@ -3616,14 +3806,21 @@
spin_unlock(&last_ptr->refill_lock);
goto checks;
}
+ } else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+ spin_unlock(&last_ptr->refill_lock);
+
+ wait_block_group_cache_progress(block_group,
+ num_bytes + empty_cluster + empty_size);
+ goto have_block_group;
}
+
/*
* at this point we either didn't find a cluster
* or we weren't able to allocate a block from our
* cluster. Free the cluster we've been trying
* to use, and go to the next block group
*/
- if (loop < 2) {
+ if (loop < LOOP_NO_EMPTY_SIZE) {
btrfs_return_cluster_to_free_space(NULL,
last_ptr);
spin_unlock(&last_ptr->refill_lock);
@@ -3634,11 +3831,17 @@
offset = btrfs_find_space_for_alloc(block_group, search_start,
num_bytes, empty_size);
- if (!offset)
+ if (!offset && (cached || (!cached &&
+ loop == LOOP_CACHING_NOWAIT))) {
goto loop;
+ } else if (!offset && (!cached &&
+ loop > LOOP_CACHING_NOWAIT)) {
+ wait_block_group_cache_progress(block_group,
+ num_bytes + empty_size);
+ goto have_block_group;
+ }
checks:
search_start = stripe_align(root, offset);
-
/* move on to the next group */
if (search_start + num_bytes >= search_end) {
btrfs_add_free_space(block_group, offset, num_bytes);
@@ -3684,13 +3887,26 @@
}
up_read(&space_info->groups_sem);
- /* loop == 0, try to find a clustered alloc in every block group
- * loop == 1, try again after forcing a chunk allocation
- * loop == 2, set empty_size and empty_cluster to 0 and try again
+ /* LOOP_CACHED_ONLY, only search fully cached block groups
+ * LOOP_CACHING_NOWAIT, search partially cached block groups, but
+ * dont wait foR them to finish caching
+ * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching
+ * LOOP_ALLOC_CHUNK, force a chunk allocation and try again
+ * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
+ * again
*/
- if (!ins->objectid && loop < 3 &&
- (empty_size || empty_cluster || allowed_chunk_alloc)) {
- if (loop >= 2) {
+ if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
+ (found_uncached_bg || empty_size || empty_cluster ||
+ allowed_chunk_alloc)) {
+ if (found_uncached_bg) {
+ found_uncached_bg = false;
+ if (loop < LOOP_CACHING_WAIT) {
+ loop++;
+ goto search;
+ }
+ }
+
+ if (loop == LOOP_ALLOC_CHUNK) {
empty_size = 0;
empty_cluster = 0;
}
@@ -3703,7 +3919,7 @@
space_info->force_alloc = 1;
}
- if (loop < 3) {
+ if (loop < LOOP_NO_EMPTY_SIZE) {
loop++;
goto search;
}
@@ -3799,7 +4015,7 @@
num_bytes, data, 1);
goto again;
}
- if (ret) {
+ if (ret == -ENOSPC) {
struct btrfs_space_info *sinfo;
sinfo = __find_space_info(root->fs_info, data);
@@ -3807,7 +4023,6 @@
"wanted %llu\n", (unsigned long long)data,
(unsigned long long)num_bytes);
dump_space_info(sinfo, num_bytes);
- BUG();
}
return ret;
@@ -3845,7 +4060,9 @@
ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
empty_size, hint_byte, search_end, ins,
data);
- update_reserved_extents(root, ins->objectid, ins->offset, 1);
+ if (!ret)
+ update_reserved_extents(root, ins->objectid, ins->offset, 1);
+
return ret;
}
@@ -4007,9 +4224,9 @@
struct btrfs_block_group_cache *block_group;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
- mutex_lock(&block_group->cache_mutex);
- cache_block_group(root, block_group);
- mutex_unlock(&block_group->cache_mutex);
+ cache_block_group(block_group);
+ wait_event(block_group->caching_q,
+ block_group_cache_done(block_group));
ret = btrfs_remove_free_space(block_group, ins->objectid,
ins->offset);
@@ -4040,7 +4257,8 @@
ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
empty_size, hint_byte, search_end,
ins, 0);
- BUG_ON(ret);
+ if (ret)
+ return ret;
if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
if (parent == 0)
@@ -4128,6 +4346,7 @@
return buf;
}
+#if 0
int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct extent_buffer *leaf)
{
@@ -4171,8 +4390,6 @@
return 0;
}
-#if 0
-
static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_leaf_ref *ref)
@@ -4553,262 +4770,471 @@
}
#endif
+struct walk_control {
+ u64 refs[BTRFS_MAX_LEVEL];
+ u64 flags[BTRFS_MAX_LEVEL];
+ struct btrfs_key update_progress;
+ int stage;
+ int level;
+ int shared_level;
+ int update_ref;
+ int keep_locks;
+};
+
+#define DROP_REFERENCE 1
+#define UPDATE_BACKREF 2
+
/*
- * helper function for drop_subtree, this function is similar to
- * walk_down_tree. The main difference is that it checks reference
- * counts while tree blocks are locked.
+ * hepler to process tree block while walking down the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function checks
+ * reference count of the block. if the block is shared and
+ * we need update back refs for the subtree rooted at the
+ * block, this function changes wc->stage to UPDATE_BACKREF
+ *
+ * when wc->stage == UPDATE_BACKREF, this function updates
+ * back refs for pointers in the block.
+ *
+ * NOTE: return value 1 means we should stop walking down.
*/
+static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ struct walk_control *wc)
+{
+ int level = wc->level;
+ struct extent_buffer *eb = path->nodes[level];
+ struct btrfs_key key;
+ u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+ int ret;
+
+ if (wc->stage == UPDATE_BACKREF &&
+ btrfs_header_owner(eb) != root->root_key.objectid)
+ return 1;
+
+ /*
+ * when reference count of tree block is 1, it won't increase
+ * again. once full backref flag is set, we never clear it.
+ */
+ if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
+ (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) {
+ BUG_ON(!path->locks[level]);
+ ret = btrfs_lookup_extent_info(trans, root,
+ eb->start, eb->len,
+ &wc->refs[level],
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
+ }
+
+ if (wc->stage == DROP_REFERENCE &&
+ wc->update_ref && wc->refs[level] > 1) {
+ BUG_ON(eb == root->node);
+ BUG_ON(path->slots[level] > 0);
+ if (level == 0)
+ btrfs_item_key_to_cpu(eb, &key, path->slots[level]);
+ else
+ btrfs_node_key_to_cpu(eb, &key, path->slots[level]);
+ if (btrfs_header_owner(eb) == root->root_key.objectid &&
+ btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) {
+ wc->stage = UPDATE_BACKREF;
+ wc->shared_level = level;
+ }
+ }
+
+ if (wc->stage == DROP_REFERENCE) {
+ if (wc->refs[level] > 1)
+ return 1;
+
+ if (path->locks[level] && !wc->keep_locks) {
+ btrfs_tree_unlock(eb);
+ path->locks[level] = 0;
+ }
+ return 0;
+ }
+
+ /* wc->stage == UPDATE_BACKREF */
+ if (!(wc->flags[level] & flag)) {
+ BUG_ON(!path->locks[level]);
+ ret = btrfs_inc_ref(trans, root, eb, 1);
+ BUG_ON(ret);
+ ret = btrfs_dec_ref(trans, root, eb, 0);
+ BUG_ON(ret);
+ ret = btrfs_set_disk_extent_flags(trans, root, eb->start,
+ eb->len, flag, 0);
+ BUG_ON(ret);
+ wc->flags[level] |= flag;
+ }
+
+ /*
+ * the block is shared by multiple trees, so it's not good to
+ * keep the tree lock
+ */
+ if (path->locks[level] && level > 0) {
+ btrfs_tree_unlock(eb);
+ path->locks[level] = 0;
+ }
+ return 0;
+}
+
+/*
+ * hepler to process tree block while walking up the tree.
+ *
+ * when wc->stage == DROP_REFERENCE, this function drops
+ * reference count on the block.
+ *
+ * when wc->stage == UPDATE_BACKREF, this function changes
+ * wc->stage back to DROP_REFERENCE if we changed wc->stage
+ * to UPDATE_BACKREF previously while processing the block.
+ *
+ * NOTE: return value 1 means we should stop walking up.
+ */
+static noinline int walk_up_proc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ struct walk_control *wc)
+{
+ int ret = 0;
+ int level = wc->level;
+ struct extent_buffer *eb = path->nodes[level];
+ u64 parent = 0;
+
+ if (wc->stage == UPDATE_BACKREF) {
+ BUG_ON(wc->shared_level < level);
+ if (level < wc->shared_level)
+ goto out;
+
+ BUG_ON(wc->refs[level] <= 1);
+ ret = find_next_key(path, level + 1, &wc->update_progress);
+ if (ret > 0)
+ wc->update_ref = 0;
+
+ wc->stage = DROP_REFERENCE;
+ wc->shared_level = -1;
+ path->slots[level] = 0;
+
+ /*
+ * check reference count again if the block isn't locked.
+ * we should start walking down the tree again if reference
+ * count is one.
+ */
+ if (!path->locks[level]) {
+ BUG_ON(level == 0);
+ btrfs_tree_lock(eb);
+ btrfs_set_lock_blocking(eb);
+ path->locks[level] = 1;
+
+ ret = btrfs_lookup_extent_info(trans, root,
+ eb->start, eb->len,
+ &wc->refs[level],
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
+ if (wc->refs[level] == 1) {
+ btrfs_tree_unlock(eb);
+ path->locks[level] = 0;
+ return 1;
+ }
+ } else {
+ BUG_ON(level != 0);
+ }
+ }
+
+ /* wc->stage == DROP_REFERENCE */
+ BUG_ON(wc->refs[level] > 1 && !path->locks[level]);
+
+ if (wc->refs[level] == 1) {
+ if (level == 0) {
+ if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+ ret = btrfs_dec_ref(trans, root, eb, 1);
+ else
+ ret = btrfs_dec_ref(trans, root, eb, 0);
+ BUG_ON(ret);
+ }
+ /* make block locked assertion in clean_tree_block happy */
+ if (!path->locks[level] &&
+ btrfs_header_generation(eb) == trans->transid) {
+ btrfs_tree_lock(eb);
+ btrfs_set_lock_blocking(eb);
+ path->locks[level] = 1;
+ }
+ clean_tree_block(trans, root, eb);
+ }
+
+ if (eb == root->node) {
+ if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+ parent = eb->start;
+ else
+ BUG_ON(root->root_key.objectid !=
+ btrfs_header_owner(eb));
+ } else {
+ if (wc->flags[level + 1] & BTRFS_BLOCK_FLAG_FULL_BACKREF)
+ parent = path->nodes[level + 1]->start;
+ else
+ BUG_ON(root->root_key.objectid !=
+ btrfs_header_owner(path->nodes[level + 1]));
+ }
+
+ ret = btrfs_free_extent(trans, root, eb->start, eb->len, parent,
+ root->root_key.objectid, level, 0);
+ BUG_ON(ret);
+out:
+ wc->refs[level] = 0;
+ wc->flags[level] = 0;
+ return ret;
+}
+
static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- struct btrfs_path *path, int *level)
+ struct btrfs_path *path,
+ struct walk_control *wc)
{
struct extent_buffer *next;
struct extent_buffer *cur;
- struct extent_buffer *parent;
u64 bytenr;
u64 ptr_gen;
- u64 refs;
- u64 flags;
u32 blocksize;
+ int level = wc->level;
int ret;
- cur = path->nodes[*level];
- ret = btrfs_lookup_extent_info(trans, root, cur->start, cur->len,
- &refs, &flags);
- BUG_ON(ret);
- if (refs > 1)
- goto out;
+ while (level >= 0) {
+ cur = path->nodes[level];
+ BUG_ON(path->slots[level] >= btrfs_header_nritems(cur));
- BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
-
- while (*level >= 0) {
- cur = path->nodes[*level];
- if (*level == 0) {
- ret = btrfs_drop_leaf_ref(trans, root, cur);
- BUG_ON(ret);
- clean_tree_block(trans, root, cur);
+ ret = walk_down_proc(trans, root, path, wc);
+ if (ret > 0)
break;
- }
- if (path->slots[*level] >= btrfs_header_nritems(cur)) {
- clean_tree_block(trans, root, cur);
- break;
- }
- bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
- blocksize = btrfs_level_size(root, *level - 1);
- ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
+ if (level == 0)
+ break;
+
+ bytenr = btrfs_node_blockptr(cur, path->slots[level]);
+ blocksize = btrfs_level_size(root, level - 1);
+ ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]);
next = read_tree_block(root, bytenr, blocksize, ptr_gen);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
- ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
- &refs, &flags);
- BUG_ON(ret);
- if (refs > 1) {
- parent = path->nodes[*level];
- ret = btrfs_free_extent(trans, root, bytenr,
- blocksize, parent->start,
- btrfs_header_owner(parent),
- *level - 1, 0);
- BUG_ON(ret);
- path->slots[*level]++;
- btrfs_tree_unlock(next);
- free_extent_buffer(next);
- continue;
- }
-
- BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));
-
- *level = btrfs_header_level(next);
- path->nodes[*level] = next;
- path->slots[*level] = 0;
- path->locks[*level] = 1;
- cond_resched();
+ level--;
+ BUG_ON(level != btrfs_header_level(next));
+ path->nodes[level] = next;
+ path->slots[level] = 0;
+ path->locks[level] = 1;
+ wc->level = level;
}
-out:
- if (path->nodes[*level] == root->node)
- parent = path->nodes[*level];
- else
- parent = path->nodes[*level + 1];
- bytenr = path->nodes[*level]->start;
- blocksize = path->nodes[*level]->len;
-
- ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent->start,
- btrfs_header_owner(parent), *level, 0);
- BUG_ON(ret);
-
- if (path->locks[*level]) {
- btrfs_tree_unlock(path->nodes[*level]);
- path->locks[*level] = 0;
- }
- free_extent_buffer(path->nodes[*level]);
- path->nodes[*level] = NULL;
- *level += 1;
- cond_resched();
return 0;
}
-/*
- * helper for dropping snapshots. This walks back up the tree in the path
- * to find the first node higher up where we haven't yet gone through
- * all the slots
- */
static noinline int walk_up_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
- int *level, int max_level)
+ struct walk_control *wc, int max_level)
{
- struct btrfs_root_item *root_item = &root->root_item;
- int i;
- int slot;
+ int level = wc->level;
int ret;
- for (i = *level; i < max_level && path->nodes[i]; i++) {
- slot = path->slots[i];
- if (slot + 1 < btrfs_header_nritems(path->nodes[i])) {
- /*
- * there is more work to do in this level.
- * Update the drop_progress marker to reflect
- * the work we've done so far, and then bump
- * the slot number
- */
- path->slots[i]++;
- WARN_ON(*level == 0);
- if (max_level == BTRFS_MAX_LEVEL) {
- btrfs_node_key(path->nodes[i],
- &root_item->drop_progress,
- path->slots[i]);
- root_item->drop_level = i;
- }
- *level = i;
+ path->slots[level] = btrfs_header_nritems(path->nodes[level]);
+ while (level < max_level && path->nodes[level]) {
+ wc->level = level;
+ if (path->slots[level] + 1 <
+ btrfs_header_nritems(path->nodes[level])) {
+ path->slots[level]++;
return 0;
} else {
- struct extent_buffer *parent;
+ ret = walk_up_proc(trans, root, path, wc);
+ if (ret > 0)
+ return 0;
- /*
- * this whole node is done, free our reference
- * on it and go up one level
- */
- if (path->nodes[*level] == root->node)
- parent = path->nodes[*level];
- else
- parent = path->nodes[*level + 1];
-
- clean_tree_block(trans, root, path->nodes[i]);
- ret = btrfs_free_extent(trans, root,
- path->nodes[i]->start,
- path->nodes[i]->len,
- parent->start,
- btrfs_header_owner(parent),
- *level, 0);
- BUG_ON(ret);
- if (path->locks[*level]) {
- btrfs_tree_unlock(path->nodes[i]);
- path->locks[i] = 0;
+ if (path->locks[level]) {
+ btrfs_tree_unlock(path->nodes[level]);
+ path->locks[level] = 0;
}
- free_extent_buffer(path->nodes[i]);
- path->nodes[i] = NULL;
- *level = i + 1;
+ free_extent_buffer(path->nodes[level]);
+ path->nodes[level] = NULL;
+ level++;
}
}
return 1;
}
/*
- * drop the reference count on the tree rooted at 'snap'. This traverses
- * the tree freeing any blocks that have a ref count of zero after being
- * decremented.
+ * drop a subvolume tree.
+ *
+ * this function traverses the tree freeing any blocks that only
+ * referenced by the tree.
+ *
+ * when a shared tree block is found. this function decreases its
+ * reference count by one. if update_ref is true, this function
+ * also make sure backrefs for the shared block and all lower level
+ * blocks are properly updated.
*/
-int btrfs_drop_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root
- *root)
+int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref)
{
- int ret = 0;
- int wret;
- int level;
struct btrfs_path *path;
- int update_count;
+ struct btrfs_trans_handle *trans;
+ struct btrfs_root *tree_root = root->fs_info->tree_root;
struct btrfs_root_item *root_item = &root->root_item;
+ struct walk_control *wc;
+ struct btrfs_key key;
+ int err = 0;
+ int ret;
+ int level;
path = btrfs_alloc_path();
BUG_ON(!path);
- level = btrfs_header_level(root->node);
+ wc = kzalloc(sizeof(*wc), GFP_NOFS);
+ BUG_ON(!wc);
+
+ trans = btrfs_start_transaction(tree_root, 1);
+
if (btrfs_disk_key_objectid(&root_item->drop_progress) == 0) {
+ level = btrfs_header_level(root->node);
path->nodes[level] = btrfs_lock_root_node(root);
btrfs_set_lock_blocking(path->nodes[level]);
path->slots[level] = 0;
path->locks[level] = 1;
+ memset(&wc->update_progress, 0,
+ sizeof(wc->update_progress));
} else {
- struct btrfs_key key;
- struct btrfs_disk_key found_key;
- struct extent_buffer *node;
-
btrfs_disk_key_to_cpu(&key, &root_item->drop_progress);
+ memcpy(&wc->update_progress, &key,
+ sizeof(wc->update_progress));
+
level = root_item->drop_level;
+ BUG_ON(level == 0);
path->lowest_level = level;
- wret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (wret < 0) {
- ret = wret;
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ path->lowest_level = 0;
+ if (ret < 0) {
+ err = ret;
goto out;
}
- node = path->nodes[level];
- btrfs_node_key(node, &found_key, path->slots[level]);
- WARN_ON(memcmp(&found_key, &root_item->drop_progress,
- sizeof(found_key)));
+ btrfs_node_key_to_cpu(path->nodes[level], &key,
+ path->slots[level]);
+ WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key)));
+
/*
* unlock our path, this is safe because only this
* function is allowed to delete this snapshot
*/
btrfs_unlock_up_safe(path, 0);
- }
- while (1) {
- unsigned long update;
- wret = walk_down_tree(trans, root, path, &level);
- if (wret > 0)
- break;
- if (wret < 0)
- ret = wret;
- wret = walk_up_tree(trans, root, path, &level,
- BTRFS_MAX_LEVEL);
- if (wret > 0)
- break;
- if (wret < 0)
- ret = wret;
- if (trans->transaction->in_commit ||
- trans->transaction->delayed_refs.flushing) {
- ret = -EAGAIN;
+ level = btrfs_header_level(root->node);
+ while (1) {
+ btrfs_tree_lock(path->nodes[level]);
+ btrfs_set_lock_blocking(path->nodes[level]);
+
+ ret = btrfs_lookup_extent_info(trans, root,
+ path->nodes[level]->start,
+ path->nodes[level]->len,
+ &wc->refs[level],
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
+
+ if (level == root_item->drop_level)
+ break;
+
+ btrfs_tree_unlock(path->nodes[level]);
+ WARN_ON(wc->refs[level] != 1);
+ level--;
+ }
+ }
+
+ wc->level = level;
+ wc->shared_level = -1;
+ wc->stage = DROP_REFERENCE;
+ wc->update_ref = update_ref;
+ wc->keep_locks = 0;
+
+ while (1) {
+ ret = walk_down_tree(trans, root, path, wc);
+ if (ret < 0) {
+ err = ret;
break;
}
- for (update_count = 0; update_count < 16; update_count++) {
+
+ ret = walk_up_tree(trans, root, path, wc, BTRFS_MAX_LEVEL);
+ if (ret < 0) {
+ err = ret;
+ break;
+ }
+
+ if (ret > 0) {
+ BUG_ON(wc->stage != DROP_REFERENCE);
+ break;
+ }
+
+ if (wc->stage == DROP_REFERENCE) {
+ level = wc->level;
+ btrfs_node_key(path->nodes[level],
+ &root_item->drop_progress,
+ path->slots[level]);
+ root_item->drop_level = level;
+ }
+
+ BUG_ON(wc->level == 0);
+ if (trans->transaction->in_commit ||
+ trans->transaction->delayed_refs.flushing) {
+ ret = btrfs_update_root(trans, tree_root,
+ &root->root_key,
+ root_item);
+ BUG_ON(ret);
+
+ btrfs_end_transaction(trans, tree_root);
+ trans = btrfs_start_transaction(tree_root, 1);
+ } else {
+ unsigned long update;
update = trans->delayed_ref_updates;
trans->delayed_ref_updates = 0;
if (update)
- btrfs_run_delayed_refs(trans, root, update);
- else
- break;
+ btrfs_run_delayed_refs(trans, tree_root,
+ update);
}
}
+ btrfs_release_path(root, path);
+ BUG_ON(err);
+
+ ret = btrfs_del_root(trans, tree_root, &root->root_key);
+ BUG_ON(ret);
+
+ free_extent_buffer(root->node);
+ free_extent_buffer(root->commit_root);
+ kfree(root);
out:
+ btrfs_end_transaction(trans, tree_root);
+ kfree(wc);
btrfs_free_path(path);
- return ret;
+ return err;
}
+/*
+ * drop subtree rooted at tree block 'node'.
+ *
+ * NOTE: this function will unlock and release tree block 'node'
+ */
int btrfs_drop_subtree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *node,
struct extent_buffer *parent)
{
struct btrfs_path *path;
+ struct walk_control *wc;
int level;
int parent_level;
int ret = 0;
int wret;
+ BUG_ON(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID);
+
path = btrfs_alloc_path();
BUG_ON(!path);
+ wc = kzalloc(sizeof(*wc), GFP_NOFS);
+ BUG_ON(!wc);
+
btrfs_assert_tree_locked(parent);
parent_level = btrfs_header_level(parent);
extent_buffer_get(parent);
@@ -4817,24 +5243,33 @@
btrfs_assert_tree_locked(node);
level = btrfs_header_level(node);
- extent_buffer_get(node);
path->nodes[level] = node;
path->slots[level] = 0;
+ path->locks[level] = 1;
+
+ wc->refs[parent_level] = 1;
+ wc->flags[parent_level] = BTRFS_BLOCK_FLAG_FULL_BACKREF;
+ wc->level = level;
+ wc->shared_level = -1;
+ wc->stage = DROP_REFERENCE;
+ wc->update_ref = 0;
+ wc->keep_locks = 1;
while (1) {
- wret = walk_down_tree(trans, root, path, &level);
- if (wret < 0)
+ wret = walk_down_tree(trans, root, path, wc);
+ if (wret < 0) {
ret = wret;
- if (wret != 0)
break;
+ }
- wret = walk_up_tree(trans, root, path, &level, parent_level);
+ wret = walk_up_tree(trans, root, path, wc, parent_level);
if (wret < 0)
ret = wret;
if (wret != 0)
break;
}
+ kfree(wc);
btrfs_free_path(path);
return ret;
}
@@ -6739,11 +7174,16 @@
&info->block_group_cache_tree);
spin_unlock(&info->block_group_cache_lock);
- btrfs_remove_free_space_cache(block_group);
down_write(&block_group->space_info->groups_sem);
list_del(&block_group->list);
up_write(&block_group->space_info->groups_sem);
+ if (block_group->cached == BTRFS_CACHE_STARTED)
+ wait_event(block_group->caching_q,
+ block_group_cache_done(block_group));
+
+ btrfs_remove_free_space_cache(block_group);
+
WARN_ON(atomic_read(&block_group->count) != 1);
kfree(block_group);
@@ -6809,9 +7249,19 @@
atomic_set(&cache->count, 1);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
- mutex_init(&cache->cache_mutex);
+ cache->fs_info = info;
+ init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
+
+ /*
+ * we only want to have 32k of ram per block group for keeping
+ * track of free space, and if we pass 1/2 of that we want to
+ * start converting things over to using bitmaps
+ */
+ cache->extents_thresh = ((1024 * 32) / 2) /
+ sizeof(struct btrfs_free_space);
+
read_extent_buffer(leaf, &cache->item,
btrfs_item_ptr_offset(leaf, path->slots[0]),
sizeof(cache->item));
@@ -6820,6 +7270,26 @@
key.objectid = found_key.objectid + found_key.offset;
btrfs_release_path(root, path);
cache->flags = btrfs_block_group_flags(&cache->item);
+ cache->sectorsize = root->sectorsize;
+
+ remove_sb_from_cache(root, cache);
+
+ /*
+ * check for two cases, either we are full, and therefore
+ * don't need to bother with the caching work since we won't
+ * find any space, or we are empty, and we can just add all
+ * the space in and be done with it. This saves us _alot_ of
+ * time, particularly in the full case.
+ */
+ if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+ cache->cached = BTRFS_CACHE_FINISHED;
+ } else if (btrfs_block_group_used(&cache->item) == 0) {
+ cache->cached = BTRFS_CACHE_FINISHED;
+ add_new_free_space(cache, root->fs_info,
+ found_key.objectid,
+ found_key.objectid +
+ found_key.offset);
+ }
ret = update_space_info(info, cache->flags, found_key.offset,
btrfs_block_group_used(&cache->item),
@@ -6863,10 +7333,19 @@
cache->key.objectid = chunk_offset;
cache->key.offset = size;
cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
+ cache->sectorsize = root->sectorsize;
+
+ /*
+ * we only want to have 32k of ram per block group for keeping track
+ * of free space, and if we pass 1/2 of that we want to start
+ * converting things over to using bitmaps
+ */
+ cache->extents_thresh = ((1024 * 32) / 2) /
+ sizeof(struct btrfs_free_space);
atomic_set(&cache->count, 1);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
- mutex_init(&cache->cache_mutex);
+ init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
@@ -6875,6 +7354,12 @@
cache->flags = type;
btrfs_set_block_group_flags(&cache->item, type);
+ cache->cached = BTRFS_CACHE_FINISHED;
+ remove_sb_from_cache(root, cache);
+
+ add_new_free_space(cache, root->fs_info, chunk_offset,
+ chunk_offset + size);
+
ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
&cache->space_info);
BUG_ON(ret);
@@ -6933,7 +7418,7 @@
rb_erase(&block_group->cache_node,
&root->fs_info->block_group_cache_tree);
spin_unlock(&root->fs_info->block_group_cache_lock);
- btrfs_remove_free_space_cache(block_group);
+
down_write(&block_group->space_info->groups_sem);
/*
* we must use list_del_init so people can check to see if they
@@ -6942,11 +7427,18 @@
list_del_init(&block_group->list);
up_write(&block_group->space_info->groups_sem);
+ if (block_group->cached == BTRFS_CACHE_STARTED)
+ wait_event(block_group->caching_q,
+ block_group_cache_done(block_group));
+
+ btrfs_remove_free_space_cache(block_group);
+
spin_lock(&block_group->space_info->lock);
block_group->space_info->total_bytes -= block_group->key.offset;
block_group->space_info->bytes_readonly -= block_group->key.offset;
spin_unlock(&block_group->space_info->lock);
- block_group->space_info->full = 0;
+
+ btrfs_clear_space_info_full(root->fs_info);
btrfs_put_block_group(block_group);
btrfs_put_block_group(block_group);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 126477e..4b83397 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -22,7 +22,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mpage.h>
#include <linux/swap.h>
@@ -151,7 +150,10 @@
}
if (end_pos > isize) {
i_size_write(inode, end_pos);
- btrfs_update_inode(trans, root, inode);
+ /* we've only changed i_size in ram, and we haven't updated
+ * the disk i_size. There is no need to log the inode
+ * at this time.
+ */
}
err = btrfs_end_transaction(trans, root);
out_unlock:
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 4538e48..5edcee3 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -16,20 +16,46 @@
* Boston, MA 021110-1307, USA.
*/
+#include <linux/pagemap.h>
#include <linux/sched.h>
+#include <linux/math64.h>
#include "ctree.h"
#include "free-space-cache.h"
#include "transaction.h"
-struct btrfs_free_space {
- struct rb_node bytes_index;
- struct rb_node offset_index;
- u64 offset;
- u64 bytes;
-};
+#define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8)
+#define MAX_CACHE_BYTES_PER_GIG (32 * 1024)
+
+static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize,
+ u64 offset)
+{
+ BUG_ON(offset < bitmap_start);
+ offset -= bitmap_start;
+ return (unsigned long)(div64_u64(offset, sectorsize));
+}
+
+static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize)
+{
+ return (unsigned long)(div64_u64(bytes, sectorsize));
+}
+
+static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group,
+ u64 offset)
+{
+ u64 bitmap_start;
+ u64 bytes_per_bitmap;
+
+ bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize;
+ bitmap_start = offset - block_group->key.objectid;
+ bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap);
+ bitmap_start *= bytes_per_bitmap;
+ bitmap_start += block_group->key.objectid;
+
+ return bitmap_start;
+}
static int tree_insert_offset(struct rb_root *root, u64 offset,
- struct rb_node *node)
+ struct rb_node *node, int bitmap)
{
struct rb_node **p = &root->rb_node;
struct rb_node *parent = NULL;
@@ -39,35 +65,32 @@
parent = *p;
info = rb_entry(parent, struct btrfs_free_space, offset_index);
- if (offset < info->offset)
+ if (offset < info->offset) {
p = &(*p)->rb_left;
- else if (offset > info->offset)
+ } else if (offset > info->offset) {
p = &(*p)->rb_right;
- else
- return -EEXIST;
- }
-
- rb_link_node(node, parent, p);
- rb_insert_color(node, root);
-
- return 0;
-}
-
-static int tree_insert_bytes(struct rb_root *root, u64 bytes,
- struct rb_node *node)
-{
- struct rb_node **p = &root->rb_node;
- struct rb_node *parent = NULL;
- struct btrfs_free_space *info;
-
- while (*p) {
- parent = *p;
- info = rb_entry(parent, struct btrfs_free_space, bytes_index);
-
- if (bytes < info->bytes)
- p = &(*p)->rb_left;
- else
- p = &(*p)->rb_right;
+ } else {
+ /*
+ * we could have a bitmap entry and an extent entry
+ * share the same offset. If this is the case, we want
+ * the extent entry to always be found first if we do a
+ * linear search through the tree, since we want to have
+ * the quickest allocation time, and allocating from an
+ * extent is faster than allocating from a bitmap. So
+ * if we're inserting a bitmap and we find an entry at
+ * this offset, we want to go right, or after this entry
+ * logically. If we are inserting an extent and we've
+ * found a bitmap, we want to go left, or before
+ * logically.
+ */
+ if (bitmap) {
+ WARN_ON(info->bitmap);
+ p = &(*p)->rb_right;
+ } else {
+ WARN_ON(!info->bitmap);
+ p = &(*p)->rb_left;
+ }
+ }
}
rb_link_node(node, parent, p);
@@ -79,110 +102,143 @@
/*
* searches the tree for the given offset.
*
- * fuzzy == 1: this is used for allocations where we are given a hint of where
- * to look for free space. Because the hint may not be completely on an offset
- * mark, or the hint may no longer point to free space we need to fudge our
- * results a bit. So we look for free space starting at or after offset with at
- * least bytes size. We prefer to find as close to the given offset as we can.
- * Also if the offset is within a free space range, then we will return the free
- * space that contains the given offset, which means we can return a free space
- * chunk with an offset before the provided offset.
- *
- * fuzzy == 0: this is just a normal tree search. Give us the free space that
- * starts at the given offset which is at least bytes size, and if its not there
- * return NULL.
+ * fuzzy - If this is set, then we are trying to make an allocation, and we just
+ * want a section that has at least bytes size and comes at or after the given
+ * offset.
*/
-static struct btrfs_free_space *tree_search_offset(struct rb_root *root,
- u64 offset, u64 bytes,
- int fuzzy)
+static struct btrfs_free_space *
+tree_search_offset(struct btrfs_block_group_cache *block_group,
+ u64 offset, int bitmap_only, int fuzzy)
{
- struct rb_node *n = root->rb_node;
- struct btrfs_free_space *entry, *ret = NULL;
+ struct rb_node *n = block_group->free_space_offset.rb_node;
+ struct btrfs_free_space *entry, *prev = NULL;
- while (n) {
- entry = rb_entry(n, struct btrfs_free_space, offset_index);
-
- if (offset < entry->offset) {
- if (fuzzy &&
- (!ret || entry->offset < ret->offset) &&
- (bytes <= entry->bytes))
- ret = entry;
- n = n->rb_left;
- } else if (offset > entry->offset) {
- if (fuzzy &&
- (entry->offset + entry->bytes - 1) >= offset &&
- bytes <= entry->bytes) {
- ret = entry;
- break;
- }
- n = n->rb_right;
- } else {
- if (bytes > entry->bytes) {
- n = n->rb_right;
- continue;
- }
- ret = entry;
+ /* find entry that is closest to the 'offset' */
+ while (1) {
+ if (!n) {
+ entry = NULL;
break;
}
+
+ entry = rb_entry(n, struct btrfs_free_space, offset_index);
+ prev = entry;
+
+ if (offset < entry->offset)
+ n = n->rb_left;
+ else if (offset > entry->offset)
+ n = n->rb_right;
+ else
+ break;
}
- return ret;
-}
+ if (bitmap_only) {
+ if (!entry)
+ return NULL;
+ if (entry->bitmap)
+ return entry;
-/*
- * return a chunk at least bytes size, as close to offset that we can get.
- */
-static struct btrfs_free_space *tree_search_bytes(struct rb_root *root,
- u64 offset, u64 bytes)
-{
- struct rb_node *n = root->rb_node;
- struct btrfs_free_space *entry, *ret = NULL;
+ /*
+ * bitmap entry and extent entry may share same offset,
+ * in that case, bitmap entry comes after extent entry.
+ */
+ n = rb_next(n);
+ if (!n)
+ return NULL;
+ entry = rb_entry(n, struct btrfs_free_space, offset_index);
+ if (entry->offset != offset)
+ return NULL;
- while (n) {
- entry = rb_entry(n, struct btrfs_free_space, bytes_index);
-
- if (bytes < entry->bytes) {
+ WARN_ON(!entry->bitmap);
+ return entry;
+ } else if (entry) {
+ if (entry->bitmap) {
/*
- * We prefer to get a hole size as close to the size we
- * are asking for so we don't take small slivers out of
- * huge holes, but we also want to get as close to the
- * offset as possible so we don't have a whole lot of
- * fragmentation.
+ * if previous extent entry covers the offset,
+ * we should return it instead of the bitmap entry
*/
- if (offset <= entry->offset) {
- if (!ret)
- ret = entry;
- else if (entry->bytes < ret->bytes)
- ret = entry;
- else if (entry->offset < ret->offset)
- ret = entry;
+ n = &entry->offset_index;
+ while (1) {
+ n = rb_prev(n);
+ if (!n)
+ break;
+ prev = rb_entry(n, struct btrfs_free_space,
+ offset_index);
+ if (!prev->bitmap) {
+ if (prev->offset + prev->bytes > offset)
+ entry = prev;
+ break;
+ }
}
- n = n->rb_left;
- } else if (bytes > entry->bytes) {
- n = n->rb_right;
+ }
+ return entry;
+ }
+
+ if (!prev)
+ return NULL;
+
+ /* find last entry before the 'offset' */
+ entry = prev;
+ if (entry->offset > offset) {
+ n = rb_prev(&entry->offset_index);
+ if (n) {
+ entry = rb_entry(n, struct btrfs_free_space,
+ offset_index);
+ BUG_ON(entry->offset > offset);
} else {
- /*
- * Ok we may have multiple chunks of the wanted size,
- * so we don't want to take the first one we find, we
- * want to take the one closest to our given offset, so
- * keep searching just in case theres a better match.
- */
- n = n->rb_right;
- if (offset > entry->offset)
- continue;
- else if (!ret || entry->offset < ret->offset)
- ret = entry;
+ if (fuzzy)
+ return entry;
+ else
+ return NULL;
}
}
- return ret;
+ if (entry->bitmap) {
+ n = &entry->offset_index;
+ while (1) {
+ n = rb_prev(n);
+ if (!n)
+ break;
+ prev = rb_entry(n, struct btrfs_free_space,
+ offset_index);
+ if (!prev->bitmap) {
+ if (prev->offset + prev->bytes > offset)
+ return prev;
+ break;
+ }
+ }
+ if (entry->offset + BITS_PER_BITMAP *
+ block_group->sectorsize > offset)
+ return entry;
+ } else if (entry->offset + entry->bytes > offset)
+ return entry;
+
+ if (!fuzzy)
+ return NULL;
+
+ while (1) {
+ if (entry->bitmap) {
+ if (entry->offset + BITS_PER_BITMAP *
+ block_group->sectorsize > offset)
+ break;
+ } else {
+ if (entry->offset + entry->bytes > offset)
+ break;
+ }
+
+ n = rb_next(&entry->offset_index);
+ if (!n)
+ return NULL;
+ entry = rb_entry(n, struct btrfs_free_space, offset_index);
+ }
+ return entry;
}
static void unlink_free_space(struct btrfs_block_group_cache *block_group,
struct btrfs_free_space *info)
{
rb_erase(&info->offset_index, &block_group->free_space_offset);
- rb_erase(&info->bytes_index, &block_group->free_space_bytes);
+ block_group->free_extents--;
+ block_group->free_space -= info->bytes;
}
static int link_free_space(struct btrfs_block_group_cache *block_group,
@@ -190,17 +246,353 @@
{
int ret = 0;
-
- BUG_ON(!info->bytes);
+ BUG_ON(!info->bitmap && !info->bytes);
ret = tree_insert_offset(&block_group->free_space_offset, info->offset,
- &info->offset_index);
+ &info->offset_index, (info->bitmap != NULL));
if (ret)
return ret;
- ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes,
- &info->bytes_index);
- if (ret)
- return ret;
+ block_group->free_space += info->bytes;
+ block_group->free_extents++;
+ return ret;
+}
+
+static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
+{
+ u64 max_bytes, possible_bytes;
+
+ /*
+ * The goal is to keep the total amount of memory used per 1gb of space
+ * at or below 32k, so we need to adjust how much memory we allow to be
+ * used by extent based free space tracking
+ */
+ max_bytes = MAX_CACHE_BYTES_PER_GIG *
+ (div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
+
+ possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
+ (sizeof(struct btrfs_free_space) *
+ block_group->extents_thresh);
+
+ if (possible_bytes > max_bytes) {
+ int extent_bytes = max_bytes -
+ (block_group->total_bitmaps * PAGE_CACHE_SIZE);
+
+ if (extent_bytes <= 0) {
+ block_group->extents_thresh = 0;
+ return;
+ }
+
+ block_group->extents_thresh = extent_bytes /
+ (sizeof(struct btrfs_free_space));
+ }
+}
+
+static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ unsigned long start, end;
+ unsigned long i;
+
+ start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+ end = start + bytes_to_bits(bytes, block_group->sectorsize);
+ BUG_ON(end > BITS_PER_BITMAP);
+
+ for (i = start; i < end; i++)
+ clear_bit(i, info->bitmap);
+
+ info->bytes -= bytes;
+ block_group->free_space -= bytes;
+}
+
+static void bitmap_set_bits(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ unsigned long start, end;
+ unsigned long i;
+
+ start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+ end = start + bytes_to_bits(bytes, block_group->sectorsize);
+ BUG_ON(end > BITS_PER_BITMAP);
+
+ for (i = start; i < end; i++)
+ set_bit(i, info->bitmap);
+
+ info->bytes += bytes;
+ block_group->free_space += bytes;
+}
+
+static int search_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *bitmap_info, u64 *offset,
+ u64 *bytes)
+{
+ unsigned long found_bits = 0;
+ unsigned long bits, i;
+ unsigned long next_zero;
+
+ i = offset_to_bit(bitmap_info->offset, block_group->sectorsize,
+ max_t(u64, *offset, bitmap_info->offset));
+ bits = bytes_to_bits(*bytes, block_group->sectorsize);
+
+ for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i);
+ i < BITS_PER_BITMAP;
+ i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i + 1)) {
+ next_zero = find_next_zero_bit(bitmap_info->bitmap,
+ BITS_PER_BITMAP, i);
+ if ((next_zero - i) >= bits) {
+ found_bits = next_zero - i;
+ break;
+ }
+ i = next_zero;
+ }
+
+ if (found_bits) {
+ *offset = (u64)(i * block_group->sectorsize) +
+ bitmap_info->offset;
+ *bytes = (u64)(found_bits) * block_group->sectorsize;
+ return 0;
+ }
+
+ return -1;
+}
+
+static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache
+ *block_group, u64 *offset,
+ u64 *bytes, int debug)
+{
+ struct btrfs_free_space *entry;
+ struct rb_node *node;
+ int ret;
+
+ if (!block_group->free_space_offset.rb_node)
+ return NULL;
+
+ entry = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, *offset),
+ 0, 1);
+ if (!entry)
+ return NULL;
+
+ for (node = &entry->offset_index; node; node = rb_next(node)) {
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ if (entry->bytes < *bytes)
+ continue;
+
+ if (entry->bitmap) {
+ ret = search_bitmap(block_group, entry, offset, bytes);
+ if (!ret)
+ return entry;
+ continue;
+ }
+
+ *offset = entry->offset;
+ *bytes = entry->bytes;
+ return entry;
+ }
+
+ return NULL;
+}
+
+static void add_new_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info, u64 offset)
+{
+ u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize;
+ int max_bitmaps = (int)div64_u64(block_group->key.offset +
+ bytes_per_bg - 1, bytes_per_bg);
+ BUG_ON(block_group->total_bitmaps >= max_bitmaps);
+
+ info->offset = offset_to_bitmap(block_group, offset);
+ link_free_space(block_group, info);
+ block_group->total_bitmaps++;
+
+ recalculate_thresholds(block_group);
+}
+
+static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *bitmap_info,
+ u64 *offset, u64 *bytes)
+{
+ u64 end;
+ u64 search_start, search_bytes;
+ int ret;
+
+again:
+ end = bitmap_info->offset +
+ (u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1;
+
+ /*
+ * XXX - this can go away after a few releases.
+ *
+ * since the only user of btrfs_remove_free_space is the tree logging
+ * stuff, and the only way to test that is under crash conditions, we
+ * want to have this debug stuff here just in case somethings not
+ * working. Search the bitmap for the space we are trying to use to
+ * make sure its actually there. If its not there then we need to stop
+ * because something has gone wrong.
+ */
+ search_start = *offset;
+ search_bytes = *bytes;
+ ret = search_bitmap(block_group, bitmap_info, &search_start,
+ &search_bytes);
+ BUG_ON(ret < 0 || search_start != *offset);
+
+ if (*offset > bitmap_info->offset && *offset + *bytes > end) {
+ bitmap_clear_bits(block_group, bitmap_info, *offset,
+ end - *offset + 1);
+ *bytes -= end - *offset + 1;
+ *offset = end + 1;
+ } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
+ bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes);
+ *bytes = 0;
+ }
+
+ if (*bytes) {
+ struct rb_node *next = rb_next(&bitmap_info->offset_index);
+ if (!bitmap_info->bytes) {
+ unlink_free_space(block_group, bitmap_info);
+ kfree(bitmap_info->bitmap);
+ kfree(bitmap_info);
+ block_group->total_bitmaps--;
+ recalculate_thresholds(block_group);
+ }
+
+ /*
+ * no entry after this bitmap, but we still have bytes to
+ * remove, so something has gone wrong.
+ */
+ if (!next)
+ return -EINVAL;
+
+ bitmap_info = rb_entry(next, struct btrfs_free_space,
+ offset_index);
+
+ /*
+ * if the next entry isn't a bitmap we need to return to let the
+ * extent stuff do its work.
+ */
+ if (!bitmap_info->bitmap)
+ return -EAGAIN;
+
+ /*
+ * Ok the next item is a bitmap, but it may not actually hold
+ * the information for the rest of this free space stuff, so
+ * look for it, and if we don't find it return so we can try
+ * everything over again.
+ */
+ search_start = *offset;
+ search_bytes = *bytes;
+ ret = search_bitmap(block_group, bitmap_info, &search_start,
+ &search_bytes);
+ if (ret < 0 || search_start != *offset)
+ return -EAGAIN;
+
+ goto again;
+ } else if (!bitmap_info->bytes) {
+ unlink_free_space(block_group, bitmap_info);
+ kfree(bitmap_info->bitmap);
+ kfree(bitmap_info);
+ block_group->total_bitmaps--;
+ recalculate_thresholds(block_group);
+ }
+
+ return 0;
+}
+
+static int insert_into_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *info)
+{
+ struct btrfs_free_space *bitmap_info;
+ int added = 0;
+ u64 bytes, offset, end;
+ int ret;
+
+ /*
+ * If we are below the extents threshold then we can add this as an
+ * extent, and don't have to deal with the bitmap
+ */
+ if (block_group->free_extents < block_group->extents_thresh &&
+ info->bytes > block_group->sectorsize * 4)
+ return 0;
+
+ /*
+ * some block groups are so tiny they can't be enveloped by a bitmap, so
+ * don't even bother to create a bitmap for this
+ */
+ if (BITS_PER_BITMAP * block_group->sectorsize >
+ block_group->key.offset)
+ return 0;
+
+ bytes = info->bytes;
+ offset = info->offset;
+
+again:
+ bitmap_info = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, offset),
+ 1, 0);
+ if (!bitmap_info) {
+ BUG_ON(added);
+ goto new_bitmap;
+ }
+
+ end = bitmap_info->offset +
+ (u64)(BITS_PER_BITMAP * block_group->sectorsize);
+
+ if (offset >= bitmap_info->offset && offset + bytes > end) {
+ bitmap_set_bits(block_group, bitmap_info, offset,
+ end - offset);
+ bytes -= end - offset;
+ offset = end;
+ added = 0;
+ } else if (offset >= bitmap_info->offset && offset + bytes <= end) {
+ bitmap_set_bits(block_group, bitmap_info, offset, bytes);
+ bytes = 0;
+ } else {
+ BUG();
+ }
+
+ if (!bytes) {
+ ret = 1;
+ goto out;
+ } else
+ goto again;
+
+new_bitmap:
+ if (info && info->bitmap) {
+ add_new_bitmap(block_group, info, offset);
+ added = 1;
+ info = NULL;
+ goto again;
+ } else {
+ spin_unlock(&block_group->tree_lock);
+
+ /* no pre-allocated info, allocate a new one */
+ if (!info) {
+ info = kzalloc(sizeof(struct btrfs_free_space),
+ GFP_NOFS);
+ if (!info) {
+ spin_lock(&block_group->tree_lock);
+ ret = -ENOMEM;
+ goto out;
+ }
+ }
+
+ /* allocate the bitmap */
+ info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+ spin_lock(&block_group->tree_lock);
+ if (!info->bitmap) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ goto again;
+ }
+
+out:
+ if (info) {
+ if (info->bitmap)
+ kfree(info->bitmap);
+ kfree(info);
+ }
return ret;
}
@@ -208,8 +600,8 @@
int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
u64 offset, u64 bytes)
{
- struct btrfs_free_space *right_info;
- struct btrfs_free_space *left_info;
+ struct btrfs_free_space *right_info = NULL;
+ struct btrfs_free_space *left_info = NULL;
struct btrfs_free_space *info = NULL;
int ret = 0;
@@ -227,18 +619,38 @@
* are adding, if there is remove that struct and add a new one to
* cover the entire range
*/
- right_info = tree_search_offset(&block_group->free_space_offset,
- offset+bytes, 0, 0);
- left_info = tree_search_offset(&block_group->free_space_offset,
- offset-1, 0, 1);
+ right_info = tree_search_offset(block_group, offset + bytes, 0, 0);
+ if (right_info && rb_prev(&right_info->offset_index))
+ left_info = rb_entry(rb_prev(&right_info->offset_index),
+ struct btrfs_free_space, offset_index);
+ else
+ left_info = tree_search_offset(block_group, offset - 1, 0, 0);
- if (right_info) {
+ /*
+ * If there was no extent directly to the left or right of this new
+ * extent then we know we're going to have to allocate a new extent, so
+ * before we do that see if we need to drop this into a bitmap
+ */
+ if ((!left_info || left_info->bitmap) &&
+ (!right_info || right_info->bitmap)) {
+ ret = insert_into_bitmap(block_group, info);
+
+ if (ret < 0) {
+ goto out;
+ } else if (ret) {
+ ret = 0;
+ goto out;
+ }
+ }
+
+ if (right_info && !right_info->bitmap) {
unlink_free_space(block_group, right_info);
info->bytes += right_info->bytes;
kfree(right_info);
}
- if (left_info && left_info->offset + left_info->bytes == offset) {
+ if (left_info && !left_info->bitmap &&
+ left_info->offset + left_info->bytes == offset) {
unlink_free_space(block_group, left_info);
info->offset = left_info->offset;
info->bytes += left_info->bytes;
@@ -248,11 +660,11 @@
ret = link_free_space(block_group, info);
if (ret)
kfree(info);
-
+out:
spin_unlock(&block_group->tree_lock);
if (ret) {
- printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret);
+ printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret);
BUG_ON(ret == -EEXIST);
}
@@ -263,40 +675,74 @@
u64 offset, u64 bytes)
{
struct btrfs_free_space *info;
+ struct btrfs_free_space *next_info = NULL;
int ret = 0;
spin_lock(&block_group->tree_lock);
- info = tree_search_offset(&block_group->free_space_offset, offset, 0,
- 1);
- if (info && info->offset == offset) {
- if (info->bytes < bytes) {
- printk(KERN_ERR "Found free space at %llu, size %llu,"
- "trying to use %llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)bytes);
+again:
+ info = tree_search_offset(block_group, offset, 0, 0);
+ if (!info) {
+ /*
+ * oops didn't find an extent that matched the space we wanted
+ * to remove, look for a bitmap instead
+ */
+ info = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, offset),
+ 1, 0);
+ if (!info) {
+ WARN_ON(1);
+ goto out_lock;
+ }
+ }
+
+ if (info->bytes < bytes && rb_next(&info->offset_index)) {
+ u64 end;
+ next_info = rb_entry(rb_next(&info->offset_index),
+ struct btrfs_free_space,
+ offset_index);
+
+ if (next_info->bitmap)
+ end = next_info->offset + BITS_PER_BITMAP *
+ block_group->sectorsize - 1;
+ else
+ end = next_info->offset + next_info->bytes;
+
+ if (next_info->bytes < bytes ||
+ next_info->offset > offset || offset > end) {
+ printk(KERN_CRIT "Found free space at %llu, size %llu,"
+ " trying to use %llu\n",
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes,
+ (unsigned long long)bytes);
WARN_ON(1);
ret = -EINVAL;
- spin_unlock(&block_group->tree_lock);
- goto out;
+ goto out_lock;
}
+
+ info = next_info;
+ }
+
+ if (info->bytes == bytes) {
unlink_free_space(block_group, info);
-
- if (info->bytes == bytes) {
- kfree(info);
- spin_unlock(&block_group->tree_lock);
- goto out;
+ if (info->bitmap) {
+ kfree(info->bitmap);
+ block_group->total_bitmaps--;
}
+ kfree(info);
+ goto out_lock;
+ }
+ if (!info->bitmap && info->offset == offset) {
+ unlink_free_space(block_group, info);
info->offset += bytes;
info->bytes -= bytes;
+ link_free_space(block_group, info);
+ goto out_lock;
+ }
- ret = link_free_space(block_group, info);
- spin_unlock(&block_group->tree_lock);
- BUG_ON(ret);
- } else if (info && info->offset < offset &&
- info->offset + info->bytes >= offset + bytes) {
+ if (!info->bitmap && info->offset <= offset &&
+ info->offset + info->bytes >= offset + bytes) {
u64 old_start = info->offset;
/*
* we're freeing space in the middle of the info,
@@ -312,7 +758,9 @@
info->offset = offset + bytes;
info->bytes = old_end - info->offset;
ret = link_free_space(block_group, info);
- BUG_ON(ret);
+ WARN_ON(ret);
+ if (ret)
+ goto out_lock;
} else {
/* the hole we're creating ends at the end
* of the info struct, just free the info
@@ -320,32 +768,22 @@
kfree(info);
}
spin_unlock(&block_group->tree_lock);
- /* step two, insert a new info struct to cover anything
- * before the hole
+
+ /* step two, insert a new info struct to cover
+ * anything before the hole
*/
ret = btrfs_add_free_space(block_group, old_start,
offset - old_start);
- BUG_ON(ret);
- } else {
- spin_unlock(&block_group->tree_lock);
- if (!info) {
- printk(KERN_ERR "couldn't find space %llu to free\n",
- (unsigned long long)offset);
- printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
- block_group->cached,
- (unsigned long long)block_group->key.objectid,
- (unsigned long long)block_group->key.offset);
- btrfs_dump_free_space(block_group, bytes);
- } else if (info) {
- printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
- "but wanted offset=%llu bytes=%llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)offset,
- (unsigned long long)bytes);
- }
- WARN_ON(1);
+ WARN_ON(ret);
+ goto out;
}
+
+ ret = remove_from_bitmap(block_group, info, &offset, &bytes);
+ if (ret == -EAGAIN)
+ goto again;
+ BUG_ON(ret);
+out_lock:
+ spin_unlock(&block_group->tree_lock);
out:
return ret;
}
@@ -361,10 +799,13 @@
info = rb_entry(n, struct btrfs_free_space, offset_index);
if (info->bytes >= bytes)
count++;
- printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+ printk(KERN_CRIT "entry offset %llu, bytes %llu, bitmap %s\n",
(unsigned long long)info->offset,
- (unsigned long long)info->bytes);
+ (unsigned long long)info->bytes,
+ (info->bitmap) ? "yes" : "no");
}
+ printk(KERN_INFO "block group has cluster?: %s\n",
+ list_empty(&block_group->cluster_list) ? "no" : "yes");
printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
"\n", count);
}
@@ -397,26 +838,35 @@
{
struct btrfs_free_space *entry;
struct rb_node *node;
+ bool bitmap;
spin_lock(&cluster->lock);
if (cluster->block_group != block_group)
goto out;
+ bitmap = cluster->points_to_bitmap;
+ cluster->block_group = NULL;
cluster->window_start = 0;
+ list_del_init(&cluster->block_group_list);
+ cluster->points_to_bitmap = false;
+
+ if (bitmap)
+ goto out;
+
node = rb_first(&cluster->root);
- while(node) {
+ while (node) {
entry = rb_entry(node, struct btrfs_free_space, offset_index);
node = rb_next(&entry->offset_index);
rb_erase(&entry->offset_index, &cluster->root);
- link_free_space(block_group, entry);
+ BUG_ON(entry->bitmap);
+ tree_insert_offset(&block_group->free_space_offset,
+ entry->offset, &entry->offset_index, 0);
}
- list_del_init(&cluster->block_group_list);
-
- btrfs_put_block_group(cluster->block_group);
- cluster->block_group = NULL;
cluster->root.rb_node = NULL;
+
out:
spin_unlock(&cluster->lock);
+ btrfs_put_block_group(block_group);
return 0;
}
@@ -425,20 +875,28 @@
struct btrfs_free_space *info;
struct rb_node *node;
struct btrfs_free_cluster *cluster;
- struct btrfs_free_cluster *safe;
+ struct list_head *head;
spin_lock(&block_group->tree_lock);
-
- list_for_each_entry_safe(cluster, safe, &block_group->cluster_list,
- block_group_list) {
+ while ((head = block_group->cluster_list.next) !=
+ &block_group->cluster_list) {
+ cluster = list_entry(head, struct btrfs_free_cluster,
+ block_group_list);
WARN_ON(cluster->block_group != block_group);
__btrfs_return_cluster_to_free_space(block_group, cluster);
+ if (need_resched()) {
+ spin_unlock(&block_group->tree_lock);
+ cond_resched();
+ spin_lock(&block_group->tree_lock);
+ }
}
- while ((node = rb_last(&block_group->free_space_bytes)) != NULL) {
- info = rb_entry(node, struct btrfs_free_space, bytes_index);
+ while ((node = rb_last(&block_group->free_space_offset)) != NULL) {
+ info = rb_entry(node, struct btrfs_free_space, offset_index);
unlink_free_space(block_group, info);
+ if (info->bitmap)
+ kfree(info->bitmap);
kfree(info);
if (need_resched()) {
spin_unlock(&block_group->tree_lock);
@@ -446,6 +904,7 @@
spin_lock(&block_group->tree_lock);
}
}
+
spin_unlock(&block_group->tree_lock);
}
@@ -453,25 +912,35 @@
u64 offset, u64 bytes, u64 empty_size)
{
struct btrfs_free_space *entry = NULL;
+ u64 bytes_search = bytes + empty_size;
u64 ret = 0;
spin_lock(&block_group->tree_lock);
- entry = tree_search_offset(&block_group->free_space_offset, offset,
- bytes + empty_size, 1);
+ entry = find_free_space(block_group, &offset, &bytes_search, 0);
if (!entry)
- entry = tree_search_bytes(&block_group->free_space_bytes,
- offset, bytes + empty_size);
- if (entry) {
+ goto out;
+
+ ret = offset;
+ if (entry->bitmap) {
+ bitmap_clear_bits(block_group, entry, offset, bytes);
+ if (!entry->bytes) {
+ unlink_free_space(block_group, entry);
+ kfree(entry->bitmap);
+ kfree(entry);
+ block_group->total_bitmaps--;
+ recalculate_thresholds(block_group);
+ }
+ } else {
unlink_free_space(block_group, entry);
- ret = entry->offset;
entry->offset += bytes;
entry->bytes -= bytes;
-
if (!entry->bytes)
kfree(entry);
else
link_free_space(block_group, entry);
}
+
+out:
spin_unlock(&block_group->tree_lock);
return ret;
@@ -517,6 +986,54 @@
return ret;
}
+static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ u64 bytes, u64 min_start)
+{
+ struct btrfs_free_space *entry;
+ int err;
+ u64 search_start = cluster->window_start;
+ u64 search_bytes = bytes;
+ u64 ret = 0;
+
+ spin_lock(&block_group->tree_lock);
+ spin_lock(&cluster->lock);
+
+ if (!cluster->points_to_bitmap)
+ goto out;
+
+ if (cluster->block_group != block_group)
+ goto out;
+
+ /*
+ * search_start is the beginning of the bitmap, but at some point it may
+ * be a good idea to point to the actual start of the free area in the
+ * bitmap, so do the offset_to_bitmap trick anyway, and set bitmap_only
+ * to 1 to make sure we get the bitmap entry
+ */
+ entry = tree_search_offset(block_group,
+ offset_to_bitmap(block_group, search_start),
+ 1, 0);
+ if (!entry || !entry->bitmap)
+ goto out;
+
+ search_start = min_start;
+ search_bytes = bytes;
+
+ err = search_bitmap(block_group, entry, &search_start,
+ &search_bytes);
+ if (err)
+ goto out;
+
+ ret = search_start;
+ bitmap_clear_bits(block_group, entry, ret, bytes);
+out:
+ spin_unlock(&cluster->lock);
+ spin_unlock(&block_group->tree_lock);
+
+ return ret;
+}
+
/*
* given a cluster, try to allocate 'bytes' from it, returns 0
* if it couldn't find anything suitably large, or a logical disk offset
@@ -530,6 +1047,10 @@
struct rb_node *node;
u64 ret = 0;
+ if (cluster->points_to_bitmap)
+ return btrfs_alloc_from_bitmap(block_group, cluster, bytes,
+ min_start);
+
spin_lock(&cluster->lock);
if (bytes > cluster->max_size)
goto out;
@@ -567,9 +1088,73 @@
}
out:
spin_unlock(&cluster->lock);
+
return ret;
}
+static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_space *entry,
+ struct btrfs_free_cluster *cluster,
+ u64 offset, u64 bytes, u64 min_bytes)
+{
+ unsigned long next_zero;
+ unsigned long i;
+ unsigned long search_bits;
+ unsigned long total_bits;
+ unsigned long found_bits;
+ unsigned long start = 0;
+ unsigned long total_found = 0;
+ bool found = false;
+
+ i = offset_to_bit(entry->offset, block_group->sectorsize,
+ max_t(u64, offset, entry->offset));
+ search_bits = bytes_to_bits(min_bytes, block_group->sectorsize);
+ total_bits = bytes_to_bits(bytes, block_group->sectorsize);
+
+again:
+ found_bits = 0;
+ for (i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i);
+ i < BITS_PER_BITMAP;
+ i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i + 1)) {
+ next_zero = find_next_zero_bit(entry->bitmap,
+ BITS_PER_BITMAP, i);
+ if (next_zero - i >= search_bits) {
+ found_bits = next_zero - i;
+ break;
+ }
+ i = next_zero;
+ }
+
+ if (!found_bits)
+ return -1;
+
+ if (!found) {
+ start = i;
+ found = true;
+ }
+
+ total_found += found_bits;
+
+ if (cluster->max_size < found_bits * block_group->sectorsize)
+ cluster->max_size = found_bits * block_group->sectorsize;
+
+ if (total_found < total_bits) {
+ i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, next_zero);
+ if (i - start > total_bits * 2) {
+ total_found = 0;
+ cluster->max_size = 0;
+ found = false;
+ }
+ goto again;
+ }
+
+ cluster->window_start = start * block_group->sectorsize +
+ entry->offset;
+ cluster->points_to_bitmap = true;
+
+ return 0;
+}
+
/*
* here we try to find a cluster of blocks in a block group. The goal
* is to find at least bytes free and up to empty_size + bytes free.
@@ -587,12 +1172,12 @@
struct btrfs_free_space *entry = NULL;
struct rb_node *node;
struct btrfs_free_space *next;
- struct btrfs_free_space *last;
+ struct btrfs_free_space *last = NULL;
u64 min_bytes;
u64 window_start;
u64 window_free;
u64 max_extent = 0;
- int total_retries = 0;
+ bool found_bitmap = false;
int ret;
/* for metadata, allow allocates with more holes */
@@ -620,31 +1205,80 @@
goto out;
}
again:
- min_bytes = min(min_bytes, bytes + empty_size);
- entry = tree_search_bytes(&block_group->free_space_bytes,
- offset, min_bytes);
+ entry = tree_search_offset(block_group, offset, found_bitmap, 1);
if (!entry) {
ret = -ENOSPC;
goto out;
}
+
+ /*
+ * If found_bitmap is true, we exhausted our search for extent entries,
+ * and we just want to search all of the bitmaps that we can find, and
+ * ignore any extent entries we find.
+ */
+ while (entry->bitmap || found_bitmap ||
+ (!entry->bitmap && entry->bytes < min_bytes)) {
+ struct rb_node *node = rb_next(&entry->offset_index);
+
+ if (entry->bitmap && entry->bytes > bytes + empty_size) {
+ ret = btrfs_bitmap_cluster(block_group, entry, cluster,
+ offset, bytes + empty_size,
+ min_bytes);
+ if (!ret)
+ goto got_it;
+ }
+
+ if (!node) {
+ ret = -ENOSPC;
+ goto out;
+ }
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ }
+
+ /*
+ * We already searched all the extent entries from the passed in offset
+ * to the end and didn't find enough space for the cluster, and we also
+ * didn't find any bitmaps that met our criteria, just go ahead and exit
+ */
+ if (found_bitmap) {
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ cluster->points_to_bitmap = false;
window_start = entry->offset;
window_free = entry->bytes;
last = entry;
max_extent = entry->bytes;
- while(1) {
+ while (1) {
/* out window is just right, lets fill it */
if (window_free >= bytes + empty_size)
break;
node = rb_next(&last->offset_index);
if (!node) {
+ if (found_bitmap)
+ goto again;
ret = -ENOSPC;
goto out;
}
next = rb_entry(node, struct btrfs_free_space, offset_index);
/*
+ * we found a bitmap, so if this search doesn't result in a
+ * cluster, we know to go and search again for the bitmaps and
+ * start looking for space there
+ */
+ if (next->bitmap) {
+ if (!found_bitmap)
+ offset = next->offset;
+ found_bitmap = true;
+ last = next;
+ continue;
+ }
+
+ /*
* we haven't filled the empty size and the window is
* very large. reset and try again
*/
@@ -655,19 +1289,6 @@
window_free = entry->bytes;
last = entry;
max_extent = 0;
- total_retries++;
- if (total_retries % 64 == 0) {
- if (min_bytes >= (bytes + empty_size)) {
- ret = -ENOSPC;
- goto out;
- }
- /*
- * grow our allocation a bit, we're not having
- * much luck
- */
- min_bytes *= 2;
- goto again;
- }
} else {
last = next;
window_free += next->bytes;
@@ -685,11 +1306,19 @@
* The cluster includes an rbtree, but only uses the offset index
* of each free space cache entry.
*/
- while(1) {
+ while (1) {
node = rb_next(&entry->offset_index);
- unlink_free_space(block_group, entry);
+ if (entry->bitmap && node) {
+ entry = rb_entry(node, struct btrfs_free_space,
+ offset_index);
+ continue;
+ } else if (entry->bitmap && !node) {
+ break;
+ }
+
+ rb_erase(&entry->offset_index, &block_group->free_space_offset);
ret = tree_insert_offset(&cluster->root, entry->offset,
- &entry->offset_index);
+ &entry->offset_index, 0);
BUG_ON(ret);
if (!node || entry == last)
@@ -697,8 +1326,10 @@
entry = rb_entry(node, struct btrfs_free_space, offset_index);
}
- ret = 0;
+
cluster->max_size = max_extent;
+got_it:
+ ret = 0;
atomic_inc(&block_group->count);
list_add_tail(&cluster->block_group_list, &block_group->cluster_list);
cluster->block_group = block_group;
@@ -718,6 +1349,7 @@
spin_lock_init(&cluster->refill_lock);
cluster->root.rb_node = NULL;
cluster->max_size = 0;
+ cluster->points_to_bitmap = false;
INIT_LIST_HEAD(&cluster->block_group_list);
cluster->block_group = NULL;
}
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index 266fb87..890a8e7 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -19,6 +19,14 @@
#ifndef __BTRFS_FREE_SPACE_CACHE
#define __BTRFS_FREE_SPACE_CACHE
+struct btrfs_free_space {
+ struct rb_node offset_index;
+ u64 offset;
+ u64 bytes;
+ unsigned long *bitmap;
+ struct list_head list;
+};
+
int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
u64 bytenr, u64 size);
int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index dbe1aab..272b9b2 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -26,7 +26,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mpage.h>
#include <linux/swap.h>
@@ -2604,8 +2603,8 @@
if (root->ref_cows)
btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0);
path = btrfs_alloc_path();
- path->reada = -1;
BUG_ON(!path);
+ path->reada = -1;
/* FIXME, add redo link to tree so we don't leak on crash */
key.objectid = inode->i_ino;
@@ -3580,12 +3579,6 @@
owner = 1;
BTRFS_I(inode)->block_group =
btrfs_find_block_group(root, 0, alloc_hint, owner);
- if ((mode & S_IFREG)) {
- if (btrfs_test_opt(root, NODATASUM))
- BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
- if (btrfs_test_opt(root, NODATACOW))
- BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
- }
key[0].objectid = objectid;
btrfs_set_key_type(&key[0], BTRFS_INODE_ITEM_KEY);
@@ -3640,6 +3633,13 @@
btrfs_inherit_iflags(inode, dir);
+ if ((mode & S_IFREG)) {
+ if (btrfs_test_opt(root, NODATASUM))
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM;
+ if (btrfs_test_opt(root, NODATACOW))
+ BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW;
+ }
+
insert_inode_hash(inode);
inode_tree_add(inode);
return inode;
@@ -4785,8 +4785,7 @@
* and the replacement file is large. Start IO on it now so
* we don't add too much work to the end of the transaction
*/
- if (new_inode && old_inode && S_ISREG(old_inode->i_mode) &&
- new_inode->i_size &&
+ if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size &&
old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
filemap_flush(old_inode->i_mapping);
@@ -5082,6 +5081,7 @@
u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
struct extent_map *em;
struct btrfs_trans_handle *trans;
+ struct btrfs_root *root;
int ret;
alloc_start = offset & ~mask;
@@ -5100,6 +5100,13 @@
goto out;
}
+ root = BTRFS_I(inode)->root;
+
+ ret = btrfs_check_data_free_space(root, inode,
+ alloc_end - alloc_start);
+ if (ret)
+ goto out;
+
locked_end = alloc_end - 1;
while (1) {
struct btrfs_ordered_extent *ordered;
@@ -5107,7 +5114,7 @@
trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
if (!trans) {
ret = -EIO;
- goto out;
+ goto out_free;
}
/* the extent lock is ordered inside the running
@@ -5168,6 +5175,8 @@
GFP_NOFS);
btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+out_free:
+ btrfs_free_reserved_data_space(root, inode, alloc_end - alloc_start);
out:
mutex_unlock(&inode->i_mutex);
return ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index eff18f5..bd88f25 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -27,7 +27,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mount.h>
#include <linux/mpage.h>
@@ -1028,7 +1027,8 @@
struct btrfs_file_extent_item);
comp = btrfs_file_extent_compression(leaf, extent);
type = btrfs_file_extent_type(leaf, extent);
- if (type == BTRFS_FILE_EXTENT_REG) {
+ if (type == BTRFS_FILE_EXTENT_REG ||
+ type == BTRFS_FILE_EXTENT_PREALLOC) {
disko = btrfs_file_extent_disk_bytenr(leaf,
extent);
diskl = btrfs_file_extent_disk_num_bytes(leaf,
@@ -1051,7 +1051,8 @@
new_key.objectid = inode->i_ino;
new_key.offset = key.offset + destoff - off;
- if (type == BTRFS_FILE_EXTENT_REG) {
+ if (type == BTRFS_FILE_EXTENT_REG ||
+ type == BTRFS_FILE_EXTENT_PREALLOC) {
ret = btrfs_insert_empty_item(trans, root, path,
&new_key, size);
if (ret)
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index 6d6523d..0d126be 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -309,7 +309,7 @@
}
printk(KERN_INFO "node %llu level %d total ptrs %d free spc %u\n",
(unsigned long long)btrfs_header_bytenr(c),
- btrfs_header_level(c), nr,
+ level, nr,
(u32)BTRFS_NODEPTRS_PER_BLOCK(root) - nr);
for (i = 0; i < nr; i++) {
btrfs_node_key_to_cpu(c, &key, i);
@@ -326,10 +326,10 @@
btrfs_level_size(root, level - 1),
btrfs_node_ptr_generation(c, i));
if (btrfs_is_leaf(next) &&
- btrfs_header_level(c) != 1)
+ level != 1)
BUG();
if (btrfs_header_level(next) !=
- btrfs_header_level(c) - 1)
+ level - 1)
BUG();
btrfs_print_tree(root, next);
free_extent_buffer(next);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index b23dc20..c04f7f2 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -670,6 +670,8 @@
err = ret;
goto out;
}
+ if (ret > 0 && path2->slots[level] > 0)
+ path2->slots[level]--;
eb = path2->nodes[level];
WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
@@ -1609,6 +1611,7 @@
BUG_ON(level == 0);
path->lowest_level = level;
ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+ path->lowest_level = 0;
if (ret < 0) {
btrfs_free_path(path);
return ret;
@@ -1788,7 +1791,7 @@
btrfs_end_transaction(trans, root);
}
- btrfs_drop_dead_root(reloc_root);
+ btrfs_drop_snapshot(reloc_root, 0);
if (atomic_dec_and_test(async->num_pending))
complete(async->done);
@@ -2075,9 +2078,6 @@
ret = btrfs_drop_subtree(trans, root, eb, upper->eb);
BUG_ON(ret);
-
- btrfs_tree_unlock(eb);
- free_extent_buffer(eb);
}
if (!lowest) {
btrfs_tree_unlock(upper->eb);
@@ -2553,8 +2553,13 @@
last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
/* make sure the dirty trick played by the caller work */
- ret = invalidate_inode_pages2_range(inode->i_mapping,
- first_index, last_index);
+ while (1) {
+ ret = invalidate_inode_pages2_range(inode->i_mapping,
+ first_index, last_index);
+ if (ret != -EBUSY)
+ break;
+ schedule_timeout(HZ/10);
+ }
if (ret)
goto out_unlock;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9f179d4..6d6d06c 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -26,7 +26,6 @@
#include <linux/init.h>
#include <linux/seq_file.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/backing-dev.h>
#include <linux/mount.h>
#include <linux/mpage.h>
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 4e83457..cdbb502 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -40,6 +40,12 @@
}
}
+static noinline void switch_commit_root(struct btrfs_root *root)
+{
+ free_extent_buffer(root->commit_root);
+ root->commit_root = btrfs_root_node(root);
+}
+
/*
* either allocate a new transaction or hop into the existing one
*/
@@ -444,9 +450,6 @@
btrfs_write_dirty_block_groups(trans, root);
- ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
- BUG_ON(ret);
-
while (1) {
old_root_bytenr = btrfs_root_bytenr(&root->root_item);
if (old_root_bytenr == root->node->start)
@@ -457,13 +460,14 @@
&root->root_key,
&root->root_item);
BUG_ON(ret);
- btrfs_write_dirty_block_groups(trans, root);
- ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
+ ret = btrfs_write_dirty_block_groups(trans, root);
BUG_ON(ret);
}
- free_extent_buffer(root->commit_root);
- root->commit_root = btrfs_root_node(root);
+
+ if (root != root->fs_info->extent_root)
+ switch_commit_root(root);
+
return 0;
}
@@ -495,10 +499,12 @@
root = list_entry(next, struct btrfs_root, dirty_list);
update_cowonly_root(trans, root);
-
- ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
- BUG_ON(ret);
}
+
+ down_write(&fs_info->extent_commit_sem);
+ switch_commit_root(fs_info->extent_root);
+ up_write(&fs_info->extent_commit_sem);
+
return 0;
}
@@ -544,8 +550,7 @@
btrfs_update_reloc_root(trans, root);
if (root->commit_root != root->node) {
- free_extent_buffer(root->commit_root);
- root->commit_root = btrfs_root_node(root);
+ switch_commit_root(root);
btrfs_set_root_node(&root->root_item,
root->node);
}
@@ -593,6 +598,7 @@
return 0;
}
+#if 0
/*
* when dropping snapshots, we generate a ton of delayed refs, and it makes
* sense not to join the transaction while it is trying to flush the current
@@ -681,6 +687,7 @@
btrfs_btree_balance_dirty(tree_root, nr);
return ret;
}
+#endif
/*
* new snapshots need to be created at a very specific time in the
@@ -850,6 +857,16 @@
super->root_level = root_item->level;
}
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
+{
+ int ret = 0;
+ spin_lock(&info->new_trans_lock);
+ if (info->running_transaction)
+ ret = info->running_transaction->in_commit;
+ spin_unlock(&info->new_trans_lock);
+ return ret;
+}
+
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
@@ -941,9 +958,11 @@
mutex_unlock(&root->fs_info->trans_mutex);
- if (flush_on_commit || snap_pending) {
- if (flush_on_commit)
- btrfs_start_delalloc_inodes(root);
+ if (flush_on_commit) {
+ btrfs_start_delalloc_inodes(root);
+ ret = btrfs_wait_ordered_extents(root, 0);
+ BUG_ON(ret);
+ } else if (snap_pending) {
ret = btrfs_wait_ordered_extents(root, 1);
BUG_ON(ret);
}
@@ -1007,15 +1026,11 @@
btrfs_set_root_node(&root->fs_info->tree_root->root_item,
root->fs_info->tree_root->node);
- free_extent_buffer(root->fs_info->tree_root->commit_root);
- root->fs_info->tree_root->commit_root =
- btrfs_root_node(root->fs_info->tree_root);
+ switch_commit_root(root->fs_info->tree_root);
btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
root->fs_info->chunk_root->node);
- free_extent_buffer(root->fs_info->chunk_root->commit_root);
- root->fs_info->chunk_root->commit_root =
- btrfs_root_node(root->fs_info->chunk_root);
+ switch_commit_root(root->fs_info->chunk_root);
update_super_roots(root);
@@ -1055,6 +1070,7 @@
cur_trans->commit_done = 1;
root->fs_info->last_trans_committed = cur_trans->transid;
+
wake_up(&cur_trans->commit_wait);
put_transaction(cur_trans);
@@ -1081,7 +1097,7 @@
while (!list_empty(&list)) {
root = list_entry(list.next, struct btrfs_root, root_list);
list_del_init(&root->root_list);
- btrfs_drop_dead_root(root);
+ btrfs_drop_snapshot(root, 0);
}
return 0;
}
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 961c3ee..663c674 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -107,4 +107,5 @@
struct btrfs_root *root);
int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
struct extent_io_tree *dirty_pages);
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
#endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c139222..d91b0de 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -797,7 +797,7 @@
return -ENOENT;
inode = read_one_inode(root, key->objectid);
- BUG_ON(!dir);
+ BUG_ON(!inode);
ref_ptr = btrfs_item_ptr_offset(eb, slot);
ref_end = ref_ptr + btrfs_item_size_nr(eb, slot);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 3ab80e9..5dbefd1 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -721,7 +721,8 @@
*/
static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
struct btrfs_device *device,
- u64 num_bytes, u64 *start)
+ u64 num_bytes, u64 *start,
+ u64 *max_avail)
{
struct btrfs_key key;
struct btrfs_root *root = device->dev_root;
@@ -758,9 +759,13 @@
ret = btrfs_search_slot(trans, root, &key, path, 0, 0);
if (ret < 0)
goto error;
- ret = btrfs_previous_item(root, path, 0, key.type);
- if (ret < 0)
- goto error;
+ if (ret > 0) {
+ ret = btrfs_previous_item(root, path, key.objectid, key.type);
+ if (ret < 0)
+ goto error;
+ if (ret > 0)
+ start_found = 1;
+ }
l = path->nodes[0];
btrfs_item_key_to_cpu(l, &key, path->slots[0]);
while (1) {
@@ -803,6 +808,10 @@
if (last_byte < search_start)
last_byte = search_start;
hole_size = key.offset - last_byte;
+
+ if (hole_size > *max_avail)
+ *max_avail = hole_size;
+
if (key.offset > last_byte &&
hole_size >= num_bytes) {
*start = last_byte;
@@ -1621,6 +1630,7 @@
device->fs_devices->total_rw_bytes += diff;
device->total_bytes = new_size;
+ device->disk_total_bytes = new_size;
btrfs_clear_space_info_full(device->dev_root->fs_info);
return btrfs_update_device(trans, device);
@@ -2007,7 +2017,7 @@
goto done;
if (ret) {
ret = 0;
- goto done;
+ break;
}
l = path->nodes[0];
@@ -2015,7 +2025,7 @@
btrfs_item_key_to_cpu(l, &key, path->slots[0]);
if (key.objectid != device->devid)
- goto done;
+ break;
dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
length = btrfs_dev_extent_length(l, dev_extent);
@@ -2171,6 +2181,7 @@
max_chunk_size);
again:
+ max_avail = 0;
if (!map || map->num_stripes != num_stripes) {
kfree(map);
map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS);
@@ -2219,7 +2230,8 @@
if (device->in_fs_metadata && avail >= min_free) {
ret = find_free_dev_extent(trans, device,
- min_free, &dev_offset);
+ min_free, &dev_offset,
+ &max_avail);
if (ret == 0) {
list_move_tail(&device->dev_alloc_list,
&private_devs);
@@ -2795,26 +2807,6 @@
}
}
- for (i = 0; i > nr; i++) {
- struct btrfs_multi_bio *multi;
- struct btrfs_bio_stripe *stripe;
- int ret;
-
- length = 1;
- ret = btrfs_map_block(map_tree, WRITE, buf[i],
- &length, &multi, 0);
- BUG_ON(ret);
-
- stripe = multi->stripes;
- for (j = 0; j < multi->num_stripes; j++) {
- if (stripe->physical >= physical &&
- physical < stripe->physical + length)
- break;
- }
- BUG_ON(j >= multi->num_stripes);
- kfree(multi);
- }
-
*logical = buf;
*naddrs = nr;
*stripe_len = map->stripe_len;
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index ecfbce8..3e2b90e 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -208,7 +208,7 @@
*total_in = 0;
workspace = find_zlib_workspace();
- if (!workspace)
+ if (IS_ERR(workspace))
return -1;
if (Z_OK != zlib_deflateInit(&workspace->def_strm, 3)) {
@@ -366,7 +366,7 @@
char *kaddr;
workspace = find_zlib_workspace();
- if (!workspace)
+ if (IS_ERR(workspace))
return -ENOMEM;
data_in = kmap(pages_in[page_in_index]);
@@ -547,7 +547,7 @@
return -ENOMEM;
workspace = find_zlib_workspace();
- if (!workspace)
+ if (IS_ERR(workspace))
return -ENOMEM;
workspace->inf_strm.next_in = data_in;
diff --git a/fs/char_dev.c b/fs/char_dev.c
index b7c9d51..a173551 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -13,7 +13,6 @@
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/kobject.h>
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index b486898..e85b1e4 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,10 @@
+Version 1.60
+-------------
+Fix memory leak in reconnect. Fix oops in DFS mount error path.
+Set s_maxbytes to smaller (the max that vfs can handle) so that
+sendfile will now work over cifs mounts again. Add noforcegid
+and noforceuid mount parameters.
+
Version 1.59
------------
Client uses server inode numbers (which are persistent) rather than
@@ -5,7 +12,11 @@
on by default if server supports it). Add forceuid and forcegid
mount options (so that when negotiating unix extensions specifying
which uid mounted does not immediately force the server's reported
-uids to be overridden).
+uids to be overridden). Add support for scope mount parm. Improve
+hard link detection to use same inode for both. Do not set
+read-only dos attribute on directories (for chmod) since Windows
+explorer special cases this attribute bit for directories for
+a different purpose.
Version 1.58
------------
diff --git a/fs/cifs/README b/fs/cifs/README
index ad92921..79c1a93 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -262,11 +262,11 @@
mount.
domain Set the SMB/CIFS workgroup name prepended to the
username during CIFS session establishment
- forceuid Set the default uid for inodes based on the uid
- passed in. For mounts to servers
+ forceuid Set the default uid for inodes to the uid
+ passed in on mount. For mounts to servers
which do support the CIFS Unix extensions, such as a
properly configured Samba server, the server provides
- the uid, gid and mode so this parameter should not be
+ the uid, gid and mode so this parameter should not be
specified unless the server and clients uid and gid
numbering differ. If the server and client are in the
same domain (e.g. running winbind or nss_ldap) and
@@ -278,11 +278,7 @@
of existing files will be the uid (gid) of the person
who executed the mount (root, except when mount.cifs
is configured setuid for user mounts) unless the "uid="
- (gid) mount option is specified. For the uid (gid) of newly
- created files and directories, ie files created since
- the last mount of the server share, the expected uid
- (gid) is cached as long as the inode remains in
- memory on the client. Also note that permission
+ (gid) mount option is specified. Also note that permission
checks (authorization checks) on accesses to a file occur
at the server, but there are cases in which an administrator
may want to restrict at the client as well. For those
@@ -290,12 +286,15 @@
(such as Windows), permissions can also be checked at the
client, and a crude form of client side permission checking
can be enabled by specifying file_mode and dir_mode on
- the client. Note that the mount.cifs helper must be
- at version 1.10 or higher to support specifying the uid
- (or gid) in non-numeric form.
- forcegid (similar to above but for the groupid instead of uid)
+ the client. (default)
+ forcegid (similar to above but for the groupid instead of uid) (default)
+ noforceuid Fill in file owner information (uid) by requesting it from
+ the server if possible. With this option, the value given in
+ the uid= option (on mount) will only be used if the server
+ can not support returning uids on inodes.
+ noforcegid (similar to above but for the group owner, gid, instead of uid)
uid Set the default uid for inodes, and indicate to the
- cifs kernel driver which local user mounted . If the server
+ cifs kernel driver which local user mounted. If the server
supports the unix extensions the default uid is
not used to fill in the owner fields of inodes (files)
unless the "forceuid" parameter is specified.
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 1b09f16..20692fb 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -49,6 +49,7 @@
#define ASN1_OJI 6 /* Object Identifier */
#define ASN1_OJD 7 /* Object Description */
#define ASN1_EXT 8 /* External */
+#define ASN1_ENUM 10 /* Enumerated */
#define ASN1_SEQ 16 /* Sequence */
#define ASN1_SET 17 /* Set */
#define ASN1_NUMSTR 18 /* Numerical String */
@@ -78,10 +79,12 @@
#define SPNEGO_OID_LEN 7
#define NTLMSSP_OID_LEN 10
#define KRB5_OID_LEN 7
+#define KRB5U2U_OID_LEN 8
#define MSKRB5_OID_LEN 7
static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 };
+static unsigned long KRB5U2U_OID[8] = { 1, 2, 840, 113554, 1, 2, 2, 3 };
static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 };
/*
@@ -122,6 +125,28 @@
return 1;
}
+#if 0 /* will be needed later by spnego decoding/encoding of ntlmssp */
+static unsigned char
+asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val)
+{
+ unsigned char ch;
+
+ if (ctx->pointer >= ctx->end) {
+ ctx->error = ASN1_ERR_DEC_EMPTY;
+ return 0;
+ }
+
+ ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+ if ((ch) == ASN1_ENUM) /* if ch value is ENUM, 0xa */
+ *val = *(++(ctx->pointer)); /* value has enum value */
+ else
+ return 0;
+
+ ctx->pointer++;
+ return 1;
+}
+#endif
+
static unsigned char
asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag)
{
@@ -476,10 +501,9 @@
unsigned int cls, con, tag, oidlen, rc;
bool use_ntlmssp = false;
bool use_kerberos = false;
+ bool use_kerberosu2u = false;
bool use_mskerberos = false;
- *secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
-
/* cifs_dump_mem(" Received SecBlob ", security_blob, length); */
asn1_open(&ctx, security_blob, length);
@@ -515,6 +539,7 @@
return 0;
}
+ /* SPNEGO */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding negTokenInit"));
return 0;
@@ -526,6 +551,7 @@
return 0;
}
+ /* negTokenInit */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding negTokenInit"));
return 0;
@@ -537,6 +563,7 @@
return 0;
}
+ /* sequence */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding 2nd part of negTokenInit"));
return 0;
@@ -548,6 +575,7 @@
return 0;
}
+ /* sequence of */
if (asn1_header_decode
(&ctx, &sequence_end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding 2nd part of negTokenInit"));
@@ -560,6 +588,7 @@
return 0;
}
+ /* list of security mechanisms */
while (!asn1_eoc_decode(&ctx, sequence_end)) {
rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
if (!rc) {
@@ -576,11 +605,15 @@
if (compare_oid(oid, oidlen, MSKRB5_OID,
MSKRB5_OID_LEN) &&
- !use_kerberos)
+ !use_mskerberos)
use_mskerberos = true;
+ else if (compare_oid(oid, oidlen, KRB5U2U_OID,
+ KRB5U2U_OID_LEN) &&
+ !use_kerberosu2u)
+ use_kerberosu2u = true;
else if (compare_oid(oid, oidlen, KRB5_OID,
KRB5_OID_LEN) &&
- !use_mskerberos)
+ !use_kerberos)
use_kerberos = true;
else if (compare_oid(oid, oidlen, NTLMSSP_OID,
NTLMSSP_OID_LEN))
@@ -593,7 +626,12 @@
}
}
+ /* mechlistMIC */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+ /* Check if we have reached the end of the blob, but with
+ no mechListMic (e.g. NTLMSSP instead of KRB5) */
+ if (ctx.error == ASN1_ERR_DEC_EMPTY)
+ goto decode_negtoken_exit;
cFYI(1, ("Error decoding last part negTokenInit exit3"));
return 0;
} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
@@ -602,6 +640,8 @@
cls, con, tag, end, *end));
return 0;
}
+
+ /* sequence */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit5"));
return 0;
@@ -611,6 +651,7 @@
cls, con, tag, end, *end));
}
+ /* sequence of */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit 7"));
return 0;
@@ -619,6 +660,8 @@
cls, con, tag, end, *end));
return 0;
}
+
+ /* general string */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit9"));
return 0;
@@ -630,13 +673,13 @@
}
cFYI(1, ("Need to call asn1_octets_decode() function for %s",
ctx.pointer)); /* is this UTF-8 or ASCII? */
-
+decode_negtoken_exit:
if (use_kerberos)
*secType = Kerberos;
else if (use_mskerberos)
*secType = MSKerberos;
else if (use_ntlmssp)
- *secType = NTLMSSP;
+ *secType = RawNTLMSSP;
return 1;
}
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 7f19fef..42cec2a 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -261,6 +261,8 @@
atomic_set(&tcon->num_reads, 0);
atomic_set(&tcon->num_oplock_brks, 0);
atomic_set(&tcon->num_opens, 0);
+ atomic_set(&tcon->num_posixopens, 0);
+ atomic_set(&tcon->num_posixmkdirs, 0);
atomic_set(&tcon->num_closes, 0);
atomic_set(&tcon->num_deletes, 0);
atomic_set(&tcon->num_mkdirs, 0);
@@ -347,11 +349,15 @@
atomic_read(&tcon->num_locks),
atomic_read(&tcon->num_hardlinks),
atomic_read(&tcon->num_symlinks));
- seq_printf(m, "\nOpens: %d Closes: %d"
+ seq_printf(m, "\nOpens: %d Closes: %d "
"Deletes: %d",
atomic_read(&tcon->num_opens),
atomic_read(&tcon->num_closes),
atomic_read(&tcon->num_deletes));
+ seq_printf(m, "\nPosix Opens: %d "
+ "Posix Mkdirs: %d",
+ atomic_read(&tcon->num_posixopens),
+ atomic_read(&tcon->num_posixmkdirs));
seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
atomic_read(&tcon->num_mkdirs),
atomic_read(&tcon->num_rmdirs));
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 3bb11be..606912d 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -55,7 +55,7 @@
* i.e. strips from UNC trailing path that is not part of share
* name and fixup missing '\' in the begining of DFS node refferal
* if neccessary.
- * Returns pointer to share name on success or NULL on error.
+ * Returns pointer to share name on success or ERR_PTR on error.
* Caller is responsible for freeing returned string.
*/
static char *cifs_get_share_name(const char *node_name)
@@ -68,7 +68,7 @@
UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */,
GFP_KERNEL);
if (!UNC)
- return NULL;
+ return ERR_PTR(-ENOMEM);
/* get share name and server name */
if (node_name[1] != '\\') {
@@ -87,7 +87,7 @@
cERROR(1, ("%s: no server name end in node name: %s",
__func__, node_name));
kfree(UNC);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
/* find sharename end */
@@ -133,6 +133,12 @@
return ERR_PTR(-EINVAL);
*devname = cifs_get_share_name(ref->node_name);
+ if (IS_ERR(*devname)) {
+ rc = PTR_ERR(*devname);
+ *devname = NULL;
+ goto compose_mount_options_err;
+ }
+
rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
if (rc != 0) {
cERROR(1, ("%s: Failed to resolve server part of %s to IP: %d",
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 4a4581c..051caec 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -86,6 +86,9 @@
/* strlen of ";user=" */
#define USER_KEY_LEN 6
+/* strlen of ";pid=0x" */
+#define PID_KEY_LEN 7
+
/* get a key struct with a SPNEGO security blob, suitable for session setup */
struct key *
cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
@@ -103,7 +106,8 @@
IP_KEY_LEN + INET6_ADDRSTRLEN +
MAX_MECH_STR_LEN +
UID_KEY_LEN + (sizeof(uid_t) * 2) +
- USER_KEY_LEN + strlen(sesInfo->userName) + 1;
+ USER_KEY_LEN + strlen(sesInfo->userName) +
+ PID_KEY_LEN + (sizeof(pid_t) * 2) + 1;
spnego_key = ERR_PTR(-ENOMEM);
description = kzalloc(desc_len, GFP_KERNEL);
@@ -141,6 +145,9 @@
dp = description + strlen(description);
sprintf(dp, ";user=%s", sesInfo->userName);
+ dp = description + strlen(description);
+ sprintf(dp, ";pid=0x%x", current->pid);
+
cFYI(1, ("key description = %s", description));
spnego_key = request_key(&cifs_spnego_key_type, description, "");
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 60e3c42..714a542 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -44,7 +44,7 @@
int maxwords = maxbytes / 2;
char tmp[NLS_MAX_CHARSET_SIZE];
- for (i = 0; from[i] && i < maxwords; i++) {
+ for (i = 0; i < maxwords && from[i]; i++) {
charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
NLS_MAX_CHARSET_SIZE);
if (charlen > 0)
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 1403b5d..6941c22 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -327,7 +327,7 @@
static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
struct cifs_sid *pownersid, struct cifs_sid *pgrpsid,
- struct inode *inode)
+ struct cifs_fattr *fattr)
{
int i;
int num_aces = 0;
@@ -340,7 +340,7 @@
if (!pdacl) {
/* no DACL in the security descriptor, set
all the permissions for user/group/other */
- inode->i_mode |= S_IRWXUGO;
+ fattr->cf_mode |= S_IRWXUGO;
return;
}
@@ -357,7 +357,7 @@
/* reset rwx permissions for user/group/other.
Also, if num_aces is 0 i.e. DACL has no ACEs,
user/group/other have no permissions */
- inode->i_mode &= ~(S_IRWXUGO);
+ fattr->cf_mode &= ~(S_IRWXUGO);
acl_base = (char *)pdacl;
acl_size = sizeof(struct cifs_acl);
@@ -379,17 +379,17 @@
if (compare_sids(&(ppace[i]->sid), pownersid))
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
- &(inode->i_mode),
+ &fattr->cf_mode,
&user_mask);
if (compare_sids(&(ppace[i]->sid), pgrpsid))
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
- &(inode->i_mode),
+ &fattr->cf_mode,
&group_mask);
if (compare_sids(&(ppace[i]->sid), &sid_everyone))
access_flags_to_mode(ppace[i]->access_req,
ppace[i]->type,
- &(inode->i_mode),
+ &fattr->cf_mode,
&other_mask);
/* memcpy((void *)(&(cifscred->aces[i])),
@@ -464,7 +464,7 @@
/* Convert CIFS ACL to POSIX form */
static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len,
- struct inode *inode)
+ struct cifs_fattr *fattr)
{
int rc;
struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
@@ -472,7 +472,7 @@
char *end_of_acl = ((char *)pntsd) + acl_len;
__u32 dacloffset;
- if ((inode == NULL) || (pntsd == NULL))
+ if (pntsd == NULL)
return -EIO;
owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
@@ -497,7 +497,7 @@
if (dacloffset)
parse_dacl(dacl_ptr, end_of_acl, owner_sid_ptr,
- group_sid_ptr, inode);
+ group_sid_ptr, fattr);
else
cFYI(1, ("no ACL")); /* BB grant all or default perms? */
@@ -508,7 +508,6 @@
memcpy((void *)(&(cifscred->gsid)), (void *)group_sid_ptr,
sizeof(struct cifs_sid)); */
-
return 0;
}
@@ -671,8 +670,9 @@
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
- const char *path, const __u16 *pfid)
+void
+cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
+ struct inode *inode, const char *path, const __u16 *pfid)
{
struct cifs_ntsd *pntsd = NULL;
u32 acllen = 0;
@@ -687,7 +687,7 @@
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
if (pntsd)
- rc = parse_sec_desc(pntsd, acllen, inode);
+ rc = parse_sec_desc(pntsd, acllen, fattr);
if (rc)
cFYI(1, ("parse sec desc failed rc = %d", rc));
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d92114..84b7525 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -308,7 +308,6 @@
if (!cifs_inode)
return NULL;
cifs_inode->cifsAttrs = 0x20; /* default */
- atomic_set(&cifs_inode->inUse, 0);
cifs_inode->time = 0;
cifs_inode->write_behind_rc = 0;
/* Until the file is open and we have gotten oplock
@@ -333,6 +332,27 @@
kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
}
+static void
+cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
+{
+ seq_printf(s, ",addr=");
+
+ switch (server->addr.sockAddr.sin_family) {
+ case AF_INET:
+ seq_printf(s, "%pI4", &server->addr.sockAddr.sin_addr.s_addr);
+ break;
+ case AF_INET6:
+ seq_printf(s, "%pI6",
+ &server->addr.sockAddr6.sin6_addr.s6_addr);
+ if (server->addr.sockAddr6.sin6_scope_id)
+ seq_printf(s, "%%%u",
+ server->addr.sockAddr6.sin6_scope_id);
+ break;
+ default:
+ seq_printf(s, "(unknown)");
+ }
+}
+
/*
* cifs_show_options() is for displaying mount options in /proc/mounts.
* Not all settable options are displayed but most of the important
@@ -343,83 +363,68 @@
{
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
- struct TCP_Server_Info *server;
cifs_sb = CIFS_SB(m->mnt_sb);
+ tcon = cifs_sb->tcon;
- if (cifs_sb) {
- tcon = cifs_sb->tcon;
- if (tcon) {
- seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
- if (tcon->ses) {
- if (tcon->ses->userName)
- seq_printf(s, ",username=%s",
- tcon->ses->userName);
- if (tcon->ses->domainName)
- seq_printf(s, ",domain=%s",
- tcon->ses->domainName);
- server = tcon->ses->server;
- if (server) {
- seq_printf(s, ",addr=");
- switch (server->addr.sockAddr6.
- sin6_family) {
- case AF_INET6:
- seq_printf(s, "%pI6",
- &server->addr.sockAddr6.sin6_addr);
- break;
- case AF_INET:
- seq_printf(s, "%pI4",
- &server->addr.sockAddr.sin_addr.s_addr);
- break;
- }
- }
- }
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) ||
- !(tcon->unix_ext))
- seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
- !(tcon->unix_ext))
- seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
- if (!tcon->unix_ext) {
- seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+ seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
+ if (tcon->ses->userName)
+ seq_printf(s, ",username=%s", tcon->ses->userName);
+ if (tcon->ses->domainName)
+ seq_printf(s, ",domain=%s", tcon->ses->domainName);
+
+ seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+ seq_printf(s, ",forceuid");
+ else
+ seq_printf(s, ",noforceuid");
+
+ seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+ seq_printf(s, ",forcegid");
+ else
+ seq_printf(s, ",noforcegid");
+
+ cifs_show_address(s, tcon->ses->server);
+
+ if (!tcon->unix_ext)
+ seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
cifs_sb->mnt_file_mode,
cifs_sb->mnt_dir_mode);
- }
- if (tcon->seal)
- seq_printf(s, ",seal");
- if (tcon->nocase)
- seq_printf(s, ",nocase");
- if (tcon->retry)
- seq_printf(s, ",hard");
- }
- if (cifs_sb->prepath)
- seq_printf(s, ",prepath=%s", cifs_sb->prepath);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- seq_printf(s, ",posixpaths");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
- seq_printf(s, ",setuids");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- seq_printf(s, ",serverino");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
- seq_printf(s, ",directio");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
- seq_printf(s, ",nouser_xattr");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- seq_printf(s, ",mapchars");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
- seq_printf(s, ",sfu");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- seq_printf(s, ",nobrl");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- seq_printf(s, ",cifsacl");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
- seq_printf(s, ",dynperm");
- if (m->mnt_sb->s_flags & MS_POSIXACL)
- seq_printf(s, ",acl");
+ if (tcon->seal)
+ seq_printf(s, ",seal");
+ if (tcon->nocase)
+ seq_printf(s, ",nocase");
+ if (tcon->retry)
+ seq_printf(s, ",hard");
+ if (cifs_sb->prepath)
+ seq_printf(s, ",prepath=%s", cifs_sb->prepath);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
+ seq_printf(s, ",posixpaths");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+ seq_printf(s, ",setuids");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ seq_printf(s, ",serverino");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ seq_printf(s, ",directio");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+ seq_printf(s, ",nouser_xattr");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+ seq_printf(s, ",mapchars");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ seq_printf(s, ",sfu");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ seq_printf(s, ",nobrl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+ seq_printf(s, ",cifsacl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ seq_printf(s, ",dynperm");
+ if (m->mnt_sb->s_flags & MS_POSIXACL)
+ seq_printf(s, ",acl");
- seq_printf(s, ",rsize=%d", cifs_sb->rsize);
- seq_printf(s, ",wsize=%d", cifs_sb->wsize);
- }
+ seq_printf(s, ",rsize=%d", cifs_sb->rsize);
+ seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+
return 0;
}
@@ -535,9 +540,14 @@
if (tcon == NULL)
return;
- lock_kernel();
read_lock(&cifs_tcp_ses_lock);
- if (tcon->tc_count == 1)
+ if ((tcon->tc_count > 1) || (tcon->tidStatus == CifsExiting)) {
+ /* we have other mounts to same share or we have
+ already tried to force umount this and woken up
+ all waiting network requests, nothing to do */
+ read_unlock(&cifs_tcp_ses_lock);
+ return;
+ } else if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
read_unlock(&cifs_tcp_ses_lock);
@@ -552,9 +562,7 @@
wake_up_all(&tcon->ses->server->response_q);
msleep(1);
}
-/* BB FIXME - finish add checks for tidStatus BB */
- unlock_kernel();
return;
}
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 9570a0e..6c17094 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -24,6 +24,19 @@
#define ROOT_I 2
+/*
+ * ino_t is 32-bits on 32-bit arch. We have to squash the 64-bit value down
+ * so that it will fit.
+ */
+static inline ino_t
+cifs_uniqueid_to_ino_t(u64 fileid)
+{
+ ino_t ino = (ino_t) fileid;
+ if (sizeof(ino_t) < sizeof(u64))
+ ino ^= fileid >> (sizeof(u64)-sizeof(ino_t)) * 8;
+ return ino;
+}
+
extern struct file_system_type cifs_fs_type;
extern const struct address_space_operations cifs_addr_ops;
extern const struct address_space_operations cifs_addr_ops_smallbuf;
@@ -100,5 +113,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.59"
+#define CIFS_VERSION "1.60"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a61ab77..6084d63 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -83,7 +83,7 @@
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
- NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
+/* NTLMSSP, */ /* can use rawNTLMSSP instead of NTLMSSP via SPNEGO */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
@@ -260,6 +260,8 @@
atomic_t num_closes;
atomic_t num_deletes;
atomic_t num_mkdirs;
+ atomic_t num_posixopens;
+ atomic_t num_posixmkdirs;
atomic_t num_rmdirs;
atomic_t num_renames;
atomic_t num_t2renames;
@@ -364,13 +366,13 @@
struct list_head openFileList;
int write_behind_rc;
__u32 cifsAttrs; /* e.g. DOS archive bit, sparse, compressed, system */
- atomic_t inUse; /* num concurrent users (local openers cifs) of file*/
unsigned long time; /* jiffies of last update/check of inode */
bool clientCanCacheRead:1; /* read oplock */
bool clientCanCacheAll:1; /* read and writebehind oplock */
bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
u64 server_eof; /* current file size on server */
+ u64 uniqueid; /* server inode number */
struct inode vfs_inode;
};
@@ -472,6 +474,32 @@
char *node_name;
};
+/*
+ * common struct for holding inode info when searching for or updating an
+ * inode with new info
+ */
+
+#define CIFS_FATTR_DFS_REFERRAL 0x1
+#define CIFS_FATTR_DELETE_PENDING 0x2
+#define CIFS_FATTR_NEED_REVAL 0x4
+
+struct cifs_fattr {
+ u32 cf_flags;
+ u32 cf_cifsattrs;
+ u64 cf_uniqueid;
+ u64 cf_eof;
+ u64 cf_bytes;
+ uid_t cf_uid;
+ gid_t cf_gid;
+ umode_t cf_mode;
+ dev_t cf_rdev;
+ unsigned int cf_nlink;
+ unsigned int cf_dtype;
+ struct timespec cf_atime;
+ struct timespec cf_mtime;
+ struct timespec cf_ctime;
+};
+
static inline void free_dfs_info_param(struct dfs_info3_param *param)
{
if (param) {
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index a785f69..2d07f89 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2328,19 +2328,7 @@
typedef struct {
__le32 NextEntryOffset;
__u32 ResumeKey; /* as with FileIndex - no need to convert */
- __le64 EndOfFile;
- __le64 NumOfBytes;
- __le64 LastStatusChange; /*SNIA specs DCE time for the 3 time fields */
- __le64 LastAccessTime;
- __le64 LastModificationTime;
- __le64 Uid;
- __le64 Gid;
- __le32 Type;
- __le64 DevMajor;
- __le64 DevMinor;
- __le64 UniqueId;
- __le64 Permissions;
- __le64 Nlinks;
+ FILE_UNIX_BASIC_INFO basic;
char FileName[1];
} __attribute__((packed)) FILE_UNIX_INFO; /* level 0x202 */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index f945232..da8fbf5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -74,7 +74,7 @@
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
enum securityEnum *secType);
-extern int cifs_inet_pton(const int, const char *source, void *dst);
+extern int cifs_convert_address(char *src, void *dst);
extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
extern void header_assemble(struct smb_hdr *, char /* command */ ,
const struct cifsTconInfo *, int /* length of
@@ -98,9 +98,13 @@
extern int cifs_posix_open(char *full_path, struct inode **pinode,
struct super_block *sb, int mode, int oflags,
int *poplock, __u16 *pnetfid, int xid);
-extern void posix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_BASIC_INFO *pData, int isNewInode);
-extern struct inode *cifs_new_inode(struct super_block *sb, __u64 *inum);
+extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
+ FILE_UNIX_BASIC_INFO *info,
+ struct cifs_sb_info *cifs_sb);
+extern void cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr);
+extern struct inode *cifs_iget(struct super_block *sb,
+ struct cifs_fattr *fattr);
+
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
FILE_ALL_INFO *pfile_info,
@@ -108,8 +112,9 @@
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, int xid);
-extern void acl_to_uid_mode(struct cifs_sb_info *cifs_sb, struct inode *inode,
- const char *path, const __u16 *pfid);
+extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+ struct cifs_fattr *fattr, struct inode *inode,
+ const char *path, const __u16 *pfid);
extern int mode_to_acl(struct inode *inode, const char *path, __u64);
extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
@@ -215,7 +220,11 @@
dev_t device;
};
-extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon,
+extern int CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+ const struct cifs_unix_set_info_args *args,
+ u16 fid, u32 pid_of_opener);
+
+extern int CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *pTcon,
char *fileName,
const struct cifs_unix_set_info_args *args,
const struct nls_table *nls_codepage,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b84c61d..1866bc2 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -594,7 +594,7 @@
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
else if (secFlags & CIFSSEC_MAY_NTLMSSP)
- server->secType = NTLMSSP;
+ server->secType = RawNTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -729,7 +729,7 @@
* the tcon is no longer on the list, so no need to take lock before
* checking this.
*/
- if (tcon->need_reconnect)
+ if ((tcon->need_reconnect) || (tcon->ses->need_reconnect))
return 0;
rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
@@ -1113,7 +1113,10 @@
psx_create_err:
cifs_buf_release(pSMB);
- cifs_stats_inc(&tcon->num_mkdirs);
+ if (posix_flags & SMB_O_DIRECTORY)
+ cifs_stats_inc(&tcon->num_posixmkdirs);
+ else
+ cifs_stats_inc(&tcon->num_posixopens);
if (rc == -EAGAIN)
goto PsxCreat;
@@ -5074,10 +5077,114 @@
}
#endif /* temporarily unneeded SetAttr legacy function */
+static void
+cifs_fill_unix_set_info(FILE_UNIX_BASIC_INFO *data_offset,
+ const struct cifs_unix_set_info_args *args)
+{
+ u64 mode = args->mode;
+
+ /*
+ * Samba server ignores set of file size to zero due to bugs in some
+ * older clients, but we should be precise - we use SetFileSize to
+ * set file size and do not want to truncate file size to zero
+ * accidently as happened on one Samba server beta by putting
+ * zero instead of -1 here
+ */
+ data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
+ data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
+ data_offset->LastStatusChange = cpu_to_le64(args->ctime);
+ data_offset->LastAccessTime = cpu_to_le64(args->atime);
+ data_offset->LastModificationTime = cpu_to_le64(args->mtime);
+ data_offset->Uid = cpu_to_le64(args->uid);
+ data_offset->Gid = cpu_to_le64(args->gid);
+ /* better to leave device as zero when it is */
+ data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
+ data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
+ data_offset->Permissions = cpu_to_le64(mode);
+
+ if (S_ISREG(mode))
+ data_offset->Type = cpu_to_le32(UNIX_FILE);
+ else if (S_ISDIR(mode))
+ data_offset->Type = cpu_to_le32(UNIX_DIR);
+ else if (S_ISLNK(mode))
+ data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
+ else if (S_ISCHR(mode))
+ data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
+ else if (S_ISBLK(mode))
+ data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
+ else if (S_ISFIFO(mode))
+ data_offset->Type = cpu_to_le32(UNIX_FIFO);
+ else if (S_ISSOCK(mode))
+ data_offset->Type = cpu_to_le32(UNIX_SOCKET);
+}
+
int
-CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
- const struct cifs_unix_set_info_args *args,
- const struct nls_table *nls_codepage, int remap)
+CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon,
+ const struct cifs_unix_set_info_args *args,
+ u16 fid, u32 pid_of_opener)
+{
+ struct smb_com_transaction2_sfi_req *pSMB = NULL;
+ FILE_UNIX_BASIC_INFO *data_offset;
+ int rc = 0;
+ u16 params, param_offset, offset, byte_count, count;
+
+ cFYI(1, ("Set Unix Info (via SetFileInfo)"));
+ rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
+
+ if (rc)
+ return rc;
+
+ pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener);
+ pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));
+
+ params = 6;
+ pSMB->MaxSetupCount = 0;
+ pSMB->Reserved = 0;
+ pSMB->Flags = 0;
+ pSMB->Timeout = 0;
+ pSMB->Reserved2 = 0;
+ param_offset = offsetof(struct smb_com_transaction2_sfi_req, Fid) - 4;
+ offset = param_offset + params;
+
+ data_offset = (FILE_UNIX_BASIC_INFO *)
+ ((char *)(&pSMB->hdr.Protocol) + offset);
+ count = sizeof(FILE_UNIX_BASIC_INFO);
+
+ pSMB->MaxParameterCount = cpu_to_le16(2);
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
+ pSMB->SetupCount = 1;
+ pSMB->Reserved3 = 0;
+ pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
+ byte_count = 3 /* pad */ + params + count;
+ pSMB->DataCount = cpu_to_le16(count);
+ pSMB->ParameterCount = cpu_to_le16(params);
+ pSMB->TotalDataCount = pSMB->DataCount;
+ pSMB->TotalParameterCount = pSMB->ParameterCount;
+ pSMB->ParameterOffset = cpu_to_le16(param_offset);
+ pSMB->DataOffset = cpu_to_le16(offset);
+ pSMB->Fid = fid;
+ pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
+ pSMB->Reserved4 = 0;
+ pSMB->hdr.smb_buf_length += byte_count;
+ pSMB->ByteCount = cpu_to_le16(byte_count);
+
+ cifs_fill_unix_set_info(data_offset, args);
+
+ rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
+ if (rc)
+ cFYI(1, ("Send error in Set Time (SetFileInfo) = %d", rc));
+
+ /* Note: On -EAGAIN error only caller can retry on handle based calls
+ since file handle passed in no longer valid */
+
+ return rc;
+}
+
+int
+CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *tcon, char *fileName,
+ const struct cifs_unix_set_info_args *args,
+ const struct nls_table *nls_codepage, int remap)
{
TRANSACTION2_SPI_REQ *pSMB = NULL;
TRANSACTION2_SPI_RSP *pSMBr = NULL;
@@ -5086,7 +5193,6 @@
int bytes_returned = 0;
FILE_UNIX_BASIC_INFO *data_offset;
__u16 params, param_offset, offset, count, byte_count;
- __u64 mode = args->mode;
cFYI(1, ("In SetUID/GID/Mode"));
setPermsRetry:
@@ -5137,38 +5243,8 @@
pSMB->InformationLevel = cpu_to_le16(SMB_SET_FILE_UNIX_BASIC);
pSMB->Reserved4 = 0;
pSMB->hdr.smb_buf_length += byte_count;
- /* Samba server ignores set of file size to zero due to bugs in some
- older clients, but we should be precise - we use SetFileSize to
- set file size and do not want to truncate file size to zero
- accidently as happened on one Samba server beta by putting
- zero instead of -1 here */
- data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64);
- data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64);
- data_offset->LastStatusChange = cpu_to_le64(args->ctime);
- data_offset->LastAccessTime = cpu_to_le64(args->atime);
- data_offset->LastModificationTime = cpu_to_le64(args->mtime);
- data_offset->Uid = cpu_to_le64(args->uid);
- data_offset->Gid = cpu_to_le64(args->gid);
- /* better to leave device as zero when it is */
- data_offset->DevMajor = cpu_to_le64(MAJOR(args->device));
- data_offset->DevMinor = cpu_to_le64(MINOR(args->device));
- data_offset->Permissions = cpu_to_le64(mode);
- if (S_ISREG(mode))
- data_offset->Type = cpu_to_le32(UNIX_FILE);
- else if (S_ISDIR(mode))
- data_offset->Type = cpu_to_le32(UNIX_DIR);
- else if (S_ISLNK(mode))
- data_offset->Type = cpu_to_le32(UNIX_SYMLINK);
- else if (S_ISCHR(mode))
- data_offset->Type = cpu_to_le32(UNIX_CHARDEV);
- else if (S_ISBLK(mode))
- data_offset->Type = cpu_to_le32(UNIX_BLOCKDEV);
- else if (S_ISFIFO(mode))
- data_offset->Type = cpu_to_le32(UNIX_FIFO);
- else if (S_ISSOCK(mode))
- data_offset->Type = cpu_to_le32(UNIX_SOCKET);
-
+ cifs_fill_unix_set_info(data_offset, args);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 97f4311..1f3345d 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -70,7 +70,6 @@
mode_t file_mode;
mode_t dir_mode;
unsigned secFlg;
- bool rw:1;
bool retry:1;
bool intr:1;
bool setuids:1;
@@ -804,6 +803,10 @@
char *data;
unsigned int temp_len, i, j;
char separator[2];
+ short int override_uid = -1;
+ short int override_gid = -1;
+ bool uid_specified = false;
+ bool gid_specified = false;
separator[0] = ',';
separator[1] = 0;
@@ -832,7 +835,6 @@
vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR;
/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
- vol->rw = true;
/* default is always to request posix paths. */
vol->posix_paths = 1;
/* default to using server inode numbers where available */
@@ -1095,18 +1097,20 @@
"too long.\n");
return 1;
}
- } else if (strnicmp(data, "uid", 3) == 0) {
- if (value && *value)
- vol->linux_uid =
- simple_strtoul(value, &value, 0);
- } else if (strnicmp(data, "forceuid", 8) == 0) {
- vol->override_uid = 1;
- } else if (strnicmp(data, "gid", 3) == 0) {
- if (value && *value)
- vol->linux_gid =
- simple_strtoul(value, &value, 0);
- } else if (strnicmp(data, "forcegid", 8) == 0) {
- vol->override_gid = 1;
+ } else if (!strnicmp(data, "uid", 3) && value && *value) {
+ vol->linux_uid = simple_strtoul(value, &value, 0);
+ uid_specified = true;
+ } else if (!strnicmp(data, "forceuid", 8)) {
+ override_uid = 1;
+ } else if (!strnicmp(data, "noforceuid", 10)) {
+ override_uid = 0;
+ } else if (!strnicmp(data, "gid", 3) && value && *value) {
+ vol->linux_gid = simple_strtoul(value, &value, 0);
+ gid_specified = true;
+ } else if (!strnicmp(data, "forcegid", 8)) {
+ override_gid = 1;
+ } else if (!strnicmp(data, "noforcegid", 10)) {
+ override_gid = 0;
} else if (strnicmp(data, "file_mode", 4) == 0) {
if (value && *value) {
vol->file_mode =
@@ -1199,7 +1203,9 @@
} else if (strnicmp(data, "guest", 5) == 0) {
/* ignore */
} else if (strnicmp(data, "rw", 2) == 0) {
- vol->rw = true;
+ /* ignore */
+ } else if (strnicmp(data, "ro", 2) == 0) {
+ /* ignore */
} else if (strnicmp(data, "noblocksend", 11) == 0) {
vol->noblocksnd = 1;
} else if (strnicmp(data, "noautotune", 10) == 0) {
@@ -1218,8 +1224,6 @@
parse these options again and set anything and it
is ok to just ignore them */
continue;
- } else if (strnicmp(data, "ro", 2) == 0) {
- vol->rw = false;
} else if (strnicmp(data, "hard", 4) == 0) {
vol->retry = 1;
} else if (strnicmp(data, "soft", 4) == 0) {
@@ -1357,6 +1361,18 @@
if (vol->UNCip == NULL)
vol->UNCip = &vol->UNC[2];
+ if (uid_specified)
+ vol->override_uid = override_uid;
+ else if (override_uid == 1)
+ printk(KERN_NOTICE "CIFS: ignoring forceuid mount option "
+ "specified with no uid= option.\n");
+
+ if (gid_specified)
+ vol->override_gid = override_gid;
+ else if (override_gid == 1)
+ printk(KERN_NOTICE "CIFS: ignoring forcegid mount option "
+ "specified with no gid= option.\n");
+
return 0;
}
@@ -1386,8 +1402,10 @@
server->addr.sockAddr.sin_addr.s_addr))
continue;
else if (addr->ss_family == AF_INET6 &&
- !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
- &addr6->sin6_addr))
+ (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+ &addr6->sin6_addr) ||
+ server->addr.sockAddr6.sin6_scope_id !=
+ addr6->sin6_scope_id))
continue;
++server->srv_count;
@@ -1433,28 +1451,15 @@
memset(&addr, 0, sizeof(struct sockaddr_storage));
+ cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip));
+
if (volume_info->UNCip && volume_info->UNC) {
- rc = cifs_inet_pton(AF_INET, volume_info->UNCip,
- &sin_server->sin_addr.s_addr);
-
- if (rc <= 0) {
- /* not ipv4 address, try ipv6 */
- rc = cifs_inet_pton(AF_INET6, volume_info->UNCip,
- &sin_server6->sin6_addr.in6_u);
- if (rc > 0)
- addr.ss_family = AF_INET6;
- } else {
- addr.ss_family = AF_INET;
- }
-
- if (rc <= 0) {
+ rc = cifs_convert_address(volume_info->UNCip, &addr);
+ if (!rc) {
/* we failed translating address */
rc = -EINVAL;
goto out_err;
}
-
- cFYI(1, ("UNC: %s ip: %s", volume_info->UNC,
- volume_info->UNCip));
} else if (volume_info->UNCip) {
/* BB using ip addr as tcp_ses name to connect to the
DFS root below */
@@ -1513,14 +1518,14 @@
cFYI(1, ("attempting ipv6 connect"));
/* BB should we allow ipv6 on port 139? */
/* other OS never observed in Wild doing 139 with v6 */
+ sin_server6->sin6_port = htons(volume_info->port);
memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
sizeof(struct sockaddr_in6));
- sin_server6->sin6_port = htons(volume_info->port);
rc = ipv6_connect(tcp_ses);
} else {
+ sin_server->sin_port = htons(volume_info->port);
memcpy(&tcp_ses->addr.sockAddr, sin_server,
sizeof(struct sockaddr_in));
- sin_server->sin_port = htons(volume_info->port);
rc = ipv4_connect(tcp_ses);
}
if (rc < 0) {
@@ -2465,10 +2470,10 @@
tcon->local_lease = volume_info->local_lease;
}
if (pSesInfo) {
- if (pSesInfo->capabilities & CAP_LARGE_FILES) {
- sb->s_maxbytes = (u64) 1 << 63;
- } else
- sb->s_maxbytes = (u64) 1 << 31; /* 2 GB */
+ if (pSesInfo->capabilities & CAP_LARGE_FILES)
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
+ else
+ sb->s_maxbytes = MAX_NON_LFS;
}
/* BB FIXME fix time_gran to be larger for LANMAN sessions */
@@ -2557,11 +2562,20 @@
if (mount_data != mount_data_global)
kfree(mount_data);
+
mount_data = cifs_compose_mount_options(
cifs_sb->mountdata, full_path + 1,
referrals, &fake_devname);
- kfree(fake_devname);
+
free_dfs_info_array(referrals, num_referrals);
+ kfree(fake_devname);
+ kfree(full_path);
+
+ if (IS_ERR(mount_data)) {
+ rc = PTR_ERR(mount_data);
+ mount_data = NULL;
+ goto mount_fail_check;
+ }
if (tcon)
cifs_put_tcon(tcon);
@@ -2569,8 +2583,6 @@
cifs_put_smb_ses(pSesInfo);
cleanup_volume_info(&volume_info);
- FreeXid(xid);
- kfree(full_path);
referral_walks_count++;
goto try_mount_again;
}
@@ -2739,6 +2751,7 @@
strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
/* mostly informational -- no need to fail on error here */
+ kfree(tcon->nativeFileSystem);
tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
bytes_left, is_unicode,
nls_codepage);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 3758965d..4326ffd 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -188,6 +188,7 @@
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifs_fattr fattr;
cFYI(1, ("posix open %s", full_path));
@@ -236,22 +237,21 @@
if (presp_data->Type == cpu_to_le32(-1))
goto posix_open_ret; /* open ok, caller does qpathinfo */
- /* get new inode and set it up */
if (!pinode)
goto posix_open_ret; /* caller does not need info */
+ cifs_unix_basic_to_fattr(&fattr, presp_data, cifs_sb);
+
+ /* get new inode and set it up */
if (*pinode == NULL) {
- __u64 unique_id = le64_to_cpu(presp_data->UniqueId);
- *pinode = cifs_new_inode(sb, &unique_id);
+ *pinode = cifs_iget(sb, &fattr);
+ if (!*pinode) {
+ rc = -ENOMEM;
+ goto posix_open_ret;
+ }
+ } else {
+ cifs_fattr_to_inode(*pinode, &fattr);
}
- /* else an inode was passed in. Update its info, don't create one */
-
- /* We do not need to close the file if new_inode fails since
- the caller will retry qpathinfo as long as inode is null */
- if (*pinode == NULL)
- goto posix_open_ret;
-
- posix_fill_in_inode(*pinode, presp_data, 1);
cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
@@ -307,8 +307,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if (oplockEnabled)
@@ -424,9 +425,10 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
/* BB implement mode setting via Windows security
descriptors e.g. */
@@ -514,10 +516,10 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path,
- &args, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
rc = cifs_get_inode_info_unix(&newinode, full_path,
@@ -540,8 +542,9 @@
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (buf == NULL) {
kfree(full_path);
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
rc = CIFSSMBOpen(xid, pTcon, full_path,
@@ -641,6 +644,15 @@
}
}
+ /*
+ * O_EXCL: optimize away the lookup, but don't hash the dentry. Let
+ * the VFS handle the create.
+ */
+ if (nd->flags & LOOKUP_EXCL) {
+ d_instantiate(direntry, NULL);
+ return 0;
+ }
+
/* can not grab the rename sem here since it would
deadlock in the cases (beginning of sys_rename itself)
in which we already have the sb rename sem */
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index df4a306..8794814 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -35,26 +35,11 @@
* 0 - name is not IP
*/
static int
-is_ip(const char *name)
+is_ip(char *name)
{
- int rc;
- struct sockaddr_in sin_server;
- struct sockaddr_in6 sin_server6;
+ struct sockaddr_storage ss;
- rc = cifs_inet_pton(AF_INET, name,
- &sin_server.sin_addr.s_addr);
-
- if (rc <= 0) {
- /* not ipv4 address, try ipv6 */
- rc = cifs_inet_pton(AF_INET6, name,
- &sin_server6.sin6_addr.in6_u);
- if (rc > 0)
- return 1;
- } else {
- return 1;
- }
- /* we failed translating address */
- return 0;
+ return cifs_convert_address(name, &ss);
}
static int
@@ -72,7 +57,7 @@
ip[datalen] = '\0';
/* make sure this looks like an address */
- if (!is_ip((const char *) ip)) {
+ if (!is_ip(ip)) {
kfree(ip);
return -EINVAL;
}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0686684..c34b7f8 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -300,14 +300,16 @@
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
pCifsFile = cifs_fill_filedata(file);
if (pCifsFile) {
+ rc = 0;
FreeXid(xid);
- return 0;
+ return rc;
}
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("inode = 0x%p file flags are 0x%x for %s",
@@ -446,9 +448,9 @@
.mtime = NO_CHANGE_64,
.device = 0,
};
- CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
+ CIFSSMBUnixSetPathInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
}
@@ -491,11 +493,12 @@
return -EBADF;
xid = GetXid();
- mutex_unlock(&pCifsFile->fh_mutex);
+ mutex_lock(&pCifsFile->fh_mutex);
if (!pCifsFile->invalidHandle) {
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
+ rc = 0;
FreeXid(xid);
- return 0;
+ return rc;
}
if (file->f_path.dentry == NULL) {
@@ -524,7 +527,7 @@
if (full_path == NULL) {
rc = -ENOMEM;
reopen_error_exit:
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
FreeXid(xid);
return rc;
}
@@ -566,14 +569,14 @@
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
cFYI(1, ("cifs_open returned 0x%x", rc));
cFYI(1, ("oplock: %d", oplock));
} else {
reopen_success:
pCifsFile->netfid = netfid;
pCifsFile->invalidHandle = false;
- mutex_lock(&pCifsFile->fh_mutex);
+ mutex_unlock(&pCifsFile->fh_mutex);
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
@@ -845,8 +848,9 @@
tcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
@@ -1805,8 +1809,9 @@
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
@@ -1885,8 +1890,9 @@
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
@@ -2019,8 +2025,9 @@
xid = GetXid();
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -2185,8 +2192,9 @@
xid = GetXid();
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
cFYI(1, ("readpage %p at offset %d 0x%x\n",
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fad882b..82d8383 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -77,239 +77,202 @@
}
}
-static void cifs_unix_info_to_inode(struct inode *inode,
- FILE_UNIX_BASIC_INFO *info, int force_uid_gid)
+/* populate an inode with info from a cifs_fattr struct */
+void
+cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
{
+ struct cifsInodeInfo *cifs_i = CIFS_I(inode);
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
- struct cifsInodeInfo *cifsInfo = CIFS_I(inode);
- __u64 num_of_bytes = le64_to_cpu(info->NumOfBytes);
- __u64 end_of_file = le64_to_cpu(info->EndOfFile);
+ unsigned long oldtime = cifs_i->time;
- inode->i_atime = cifs_NTtimeToUnix(info->LastAccessTime);
- inode->i_mtime =
- cifs_NTtimeToUnix(info->LastModificationTime);
- inode->i_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
- inode->i_mode = le64_to_cpu(info->Permissions);
+ inode->i_atime = fattr->cf_atime;
+ inode->i_mtime = fattr->cf_mtime;
+ inode->i_ctime = fattr->cf_ctime;
+ inode->i_rdev = fattr->cf_rdev;
+ inode->i_nlink = fattr->cf_nlink;
+ inode->i_uid = fattr->cf_uid;
+ inode->i_gid = fattr->cf_gid;
+
+ /* if dynperm is set, don't clobber existing mode */
+ if (inode->i_state & I_NEW ||
+ !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM))
+ inode->i_mode = fattr->cf_mode;
+
+ cifs_i->cifsAttrs = fattr->cf_cifsattrs;
+ cifs_i->uniqueid = fattr->cf_uniqueid;
+
+ if (fattr->cf_flags & CIFS_FATTR_NEED_REVAL)
+ cifs_i->time = 0;
+ else
+ cifs_i->time = jiffies;
+
+ cFYI(1, ("inode 0x%p old_time=%ld new_time=%ld", inode,
+ oldtime, cifs_i->time));
+
+ cifs_i->delete_pending = fattr->cf_flags & CIFS_FATTR_DELETE_PENDING;
/*
- * Since we set the inode type below we need to mask off
- * to avoid strange results if bits set above.
+ * Can't safely change the file size here if the client is writing to
+ * it due to potential races.
*/
- inode->i_mode &= ~S_IFMT;
- switch (le32_to_cpu(info->Type)) {
- case UNIX_FILE:
- inode->i_mode |= S_IFREG;
- break;
- case UNIX_SYMLINK:
- inode->i_mode |= S_IFLNK;
- break;
- case UNIX_DIR:
- inode->i_mode |= S_IFDIR;
- break;
- case UNIX_CHARDEV:
- inode->i_mode |= S_IFCHR;
- inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
- le64_to_cpu(info->DevMinor) & MINORMASK);
- break;
- case UNIX_BLOCKDEV:
- inode->i_mode |= S_IFBLK;
- inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
- le64_to_cpu(info->DevMinor) & MINORMASK);
- break;
- case UNIX_FIFO:
- inode->i_mode |= S_IFIFO;
- break;
- case UNIX_SOCKET:
- inode->i_mode |= S_IFSOCK;
- break;
- default:
- /* safest to call it a file if we do not know */
- inode->i_mode |= S_IFREG;
- cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
- break;
- }
-
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) &&
- !force_uid_gid)
- inode->i_uid = cifs_sb->mnt_uid;
- else
- inode->i_uid = le64_to_cpu(info->Uid);
-
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) &&
- !force_uid_gid)
- inode->i_gid = cifs_sb->mnt_gid;
- else
- inode->i_gid = le64_to_cpu(info->Gid);
-
- inode->i_nlink = le64_to_cpu(info->Nlinks);
-
- cifsInfo->server_eof = end_of_file;
spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /*
- * We can not safely change the file size here if the client
- * is writing to it due to potential races.
- */
- i_size_write(inode, end_of_file);
+ if (is_size_safe_to_change(cifs_i, fattr->cf_eof)) {
+ i_size_write(inode, fattr->cf_eof);
/*
* i_blocks is not related to (i_size / i_blksize),
* but instead 512 byte (2**9) size is required for
* calculating num blocks.
*/
- inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
+ inode->i_blocks = (512 - 1 + fattr->cf_bytes) >> 9;
}
spin_unlock(&inode->i_lock);
+
+ cifs_set_ops(inode, fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL);
}
+/* Fill a cifs_fattr struct with info from FILE_UNIX_BASIC_INFO. */
+void
+cifs_unix_basic_to_fattr(struct cifs_fattr *fattr, FILE_UNIX_BASIC_INFO *info,
+ struct cifs_sb_info *cifs_sb)
+{
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_uniqueid = le64_to_cpu(info->UniqueId);
+ fattr->cf_bytes = le64_to_cpu(info->NumOfBytes);
+ fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+
+ fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+ fattr->cf_mtime = cifs_NTtimeToUnix(info->LastModificationTime);
+ fattr->cf_ctime = cifs_NTtimeToUnix(info->LastStatusChange);
+ fattr->cf_mode = le64_to_cpu(info->Permissions);
+
+ /*
+ * Since we set the inode type below we need to mask off
+ * to avoid strange results if bits set above.
+ */
+ fattr->cf_mode &= ~S_IFMT;
+ switch (le32_to_cpu(info->Type)) {
+ case UNIX_FILE:
+ fattr->cf_mode |= S_IFREG;
+ fattr->cf_dtype = DT_REG;
+ break;
+ case UNIX_SYMLINK:
+ fattr->cf_mode |= S_IFLNK;
+ fattr->cf_dtype = DT_LNK;
+ break;
+ case UNIX_DIR:
+ fattr->cf_mode |= S_IFDIR;
+ fattr->cf_dtype = DT_DIR;
+ break;
+ case UNIX_CHARDEV:
+ fattr->cf_mode |= S_IFCHR;
+ fattr->cf_dtype = DT_CHR;
+ fattr->cf_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+ le64_to_cpu(info->DevMinor) & MINORMASK);
+ break;
+ case UNIX_BLOCKDEV:
+ fattr->cf_mode |= S_IFBLK;
+ fattr->cf_dtype = DT_BLK;
+ fattr->cf_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+ le64_to_cpu(info->DevMinor) & MINORMASK);
+ break;
+ case UNIX_FIFO:
+ fattr->cf_mode |= S_IFIFO;
+ fattr->cf_dtype = DT_FIFO;
+ break;
+ case UNIX_SOCKET:
+ fattr->cf_mode |= S_IFSOCK;
+ fattr->cf_dtype = DT_SOCK;
+ break;
+ default:
+ /* safest to call it a file if we do not know */
+ fattr->cf_mode |= S_IFREG;
+ fattr->cf_dtype = DT_REG;
+ cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
+ break;
+ }
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ else
+ fattr->cf_uid = le64_to_cpu(info->Uid);
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+ fattr->cf_gid = cifs_sb->mnt_gid;
+ else
+ fattr->cf_gid = le64_to_cpu(info->Gid);
+
+ fattr->cf_nlink = le64_to_cpu(info->Nlinks);
+}
/*
- * Needed to setup inode data for the directory which is the
- * junction to the new submount (ie to setup the fake directory
- * which represents a DFS referral)
- */
-static void fill_fake_finddataunix(FILE_UNIX_BASIC_INFO *pfnd_dat,
- struct super_block *sb)
-{
- struct inode *pinode = NULL;
-
- memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
-
-/* __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
- __le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
- __u64 UniqueId = 0; */
- pfnd_dat->LastStatusChange =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastAccessTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastModificationTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->Type = cpu_to_le32(UNIX_DIR);
- pfnd_dat->Permissions = cpu_to_le64(S_IXUGO | S_IRWXU);
- pfnd_dat->Nlinks = cpu_to_le64(2);
- if (sb->s_root)
- pinode = sb->s_root->d_inode;
- if (pinode == NULL)
- return;
-
- /* fill in default values for the remaining based on root
- inode since we can not query the server for this inode info */
- pfnd_dat->DevMajor = cpu_to_le64(MAJOR(pinode->i_rdev));
- pfnd_dat->DevMinor = cpu_to_le64(MINOR(pinode->i_rdev));
- pfnd_dat->Uid = cpu_to_le64(pinode->i_uid);
- pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
-}
-
-/**
- * cifs_new inode - create new inode, initialize, and hash it
- * @sb - pointer to superblock
- * @inum - if valid pointer and serverino is enabled, replace i_ino with val
+ * Fill a cifs_fattr struct with fake inode info.
*
- * Create a new inode, initialize it for CIFS and hash it. Returns the new
- * inode or NULL if one couldn't be allocated.
- *
- * If the share isn't mounted with "serverino" or inum is a NULL pointer then
- * we'll just use the inode number assigned by new_inode(). Note that this can
- * mean i_ino collisions since the i_ino assigned by new_inode is not
- * guaranteed to be unique.
+ * Needed to setup cifs_fattr data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral).
*/
-struct inode *
-cifs_new_inode(struct super_block *sb, __u64 *inum)
+static void
+cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
{
- struct inode *inode;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- inode = new_inode(sb);
- if (inode == NULL)
- return NULL;
+ cFYI(1, ("creating fake fattr for DFS referral"));
- /*
- * BB: Is i_ino == 0 legal? Here, we assume that it is. If it isn't we
- * stop passing inum as ptr. Are there sanity checks we can use to
- * ensure that the server is really filling in that field? Also,
- * if serverino is disabled, perhaps we should be using iunique()?
- */
- if (inum && (CIFS_SB(sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
- inode->i_ino = (unsigned long) *inum;
-
- /*
- * must set this here instead of cifs_alloc_inode since VFS will
- * clobber i_flags
- */
- if (sb->s_flags & MS_NOATIME)
- inode->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(inode);
-
- return inode;
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_mode = S_IFDIR | S_IXUGO | S_IRWXU;
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ fattr->cf_gid = cifs_sb->mnt_gid;
+ fattr->cf_atime = CURRENT_TIME;
+ fattr->cf_ctime = CURRENT_TIME;
+ fattr->cf_mtime = CURRENT_TIME;
+ fattr->cf_nlink = 2;
+ fattr->cf_flags |= CIFS_FATTR_DFS_REFERRAL;
}
int cifs_get_inode_info_unix(struct inode **pinode,
- const unsigned char *full_path, struct super_block *sb, int xid)
+ const unsigned char *full_path,
+ struct super_block *sb, int xid)
{
- int rc = 0;
+ int rc;
FILE_UNIX_BASIC_INFO find_data;
- struct cifsTconInfo *pTcon;
- struct inode *inode;
+ struct cifs_fattr fattr;
+ struct cifsTconInfo *tcon;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- bool is_dfs_referral = false;
- struct cifsInodeInfo *cifsInfo;
- __u64 num_of_bytes;
- __u64 end_of_file;
- pTcon = cifs_sb->tcon;
+ tcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", full_path));
/* could have done a find first instead but this returns more info */
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
+ rc = CIFSSMBUnixQPathInfo(xid, tcon, full_path, &find_data,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc == -EREMOTE && !is_dfs_referral) {
- is_dfs_referral = true;
- cFYI(DBG2, ("DFS ref"));
- /* for DFS, server does not give us real inode data */
- fill_fake_finddataunix(&find_data, sb);
+
+ if (!rc) {
+ cifs_unix_basic_to_fattr(&fattr, &find_data, cifs_sb);
+ } else if (rc == -EREMOTE) {
+ cifs_create_dfs_fattr(&fattr, sb);
rc = 0;
- } else if (rc)
- goto cgiiu_exit;
-
- num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
- end_of_file = le64_to_cpu(find_data.EndOfFile);
-
- /* get new inode */
- if (*pinode == NULL) {
- __u64 unique_id = le64_to_cpu(find_data.UniqueId);
- *pinode = cifs_new_inode(sb, &unique_id);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgiiu_exit;
- }
+ } else {
+ return rc;
}
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
+ if (*pinode == NULL) {
+ /* get new inode */
+ *pinode = cifs_iget(sb, &fattr);
+ if (!*pinode)
+ rc = -ENOMEM;
+ } else {
+ /* we already have inode, update it */
+ cifs_fattr_to_inode(*pinode, &fattr);
+ }
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
- /* this is ok to set on every inode revalidate */
- atomic_set(&cifsInfo->inUse, 1);
-
- cifs_unix_info_to_inode(inode, &find_data, 0);
-
- if (num_of_bytes < end_of_file)
- cFYI(1, ("allocation size less than end of file"));
- cFYI(1, ("Size %ld and blocks %llu",
- (unsigned long) inode->i_size,
- (unsigned long long)inode->i_blocks));
-
- cifs_set_ops(inode, is_dfs_referral);
-cgiiu_exit:
return rc;
}
-static int decode_sfu_inode(struct inode *inode, __u64 size,
- const unsigned char *path,
- struct cifs_sb_info *cifs_sb, int xid)
+static int
+cifs_sfu_type(struct cifs_fattr *fattr, const unsigned char *path,
+ struct cifs_sb_info *cifs_sb, int xid)
{
int rc;
int oplock = 0;
@@ -321,10 +284,15 @@
pbuf = buf;
- if (size == 0) {
- inode->i_mode |= S_IFIFO;
+ fattr->cf_mode &= ~S_IFMT;
+
+ if (fattr->cf_eof == 0) {
+ fattr->cf_mode |= S_IFIFO;
+ fattr->cf_dtype = DT_FIFO;
return 0;
- } else if (size < 8) {
+ } else if (fattr->cf_eof < 8) {
+ fattr->cf_mode |= S_IFREG;
+ fattr->cf_dtype = DT_REG;
return -EINVAL; /* EOPNOTSUPP? */
}
@@ -336,42 +304,46 @@
if (rc == 0) {
int buf_type = CIFS_NO_BUFFER;
/* Read header */
- rc = CIFSSMBRead(xid, pTcon,
- netfid,
+ rc = CIFSSMBRead(xid, pTcon, netfid,
24 /* length */, 0 /* offset */,
&bytes_read, &pbuf, &buf_type);
if ((rc == 0) && (bytes_read >= 8)) {
if (memcmp("IntxBLK", pbuf, 8) == 0) {
cFYI(1, ("Block device"));
- inode->i_mode |= S_IFBLK;
+ fattr->cf_mode |= S_IFBLK;
+ fattr->cf_dtype = DT_BLK;
if (bytes_read == 24) {
/* we have enough to decode dev num */
__u64 mjr; /* major */
__u64 mnr; /* minor */
mjr = le64_to_cpu(*(__le64 *)(pbuf+8));
mnr = le64_to_cpu(*(__le64 *)(pbuf+16));
- inode->i_rdev = MKDEV(mjr, mnr);
+ fattr->cf_rdev = MKDEV(mjr, mnr);
}
} else if (memcmp("IntxCHR", pbuf, 8) == 0) {
cFYI(1, ("Char device"));
- inode->i_mode |= S_IFCHR;
+ fattr->cf_mode |= S_IFCHR;
+ fattr->cf_dtype = DT_CHR;
if (bytes_read == 24) {
/* we have enough to decode dev num */
__u64 mjr; /* major */
__u64 mnr; /* minor */
mjr = le64_to_cpu(*(__le64 *)(pbuf+8));
mnr = le64_to_cpu(*(__le64 *)(pbuf+16));
- inode->i_rdev = MKDEV(mjr, mnr);
+ fattr->cf_rdev = MKDEV(mjr, mnr);
}
} else if (memcmp("IntxLNK", pbuf, 7) == 0) {
cFYI(1, ("Symlink"));
- inode->i_mode |= S_IFLNK;
+ fattr->cf_mode |= S_IFLNK;
+ fattr->cf_dtype = DT_LNK;
} else {
- inode->i_mode |= S_IFREG; /* file? */
+ fattr->cf_mode |= S_IFREG; /* file? */
+ fattr->cf_dtype = DT_REG;
rc = -EOPNOTSUPP;
}
} else {
- inode->i_mode |= S_IFREG; /* then it is a file */
+ fattr->cf_mode |= S_IFREG; /* then it is a file */
+ fattr->cf_dtype = DT_REG;
rc = -EOPNOTSUPP; /* or some unknown SFU type */
}
CIFSSMBClose(xid, pTcon, netfid);
@@ -381,9 +353,13 @@
#define SFBITS_MASK (S_ISVTX | S_ISGID | S_ISUID) /* SETFILEBITS valid bits */
-static int get_sfu_mode(struct inode *inode,
- const unsigned char *path,
- struct cifs_sb_info *cifs_sb, int xid)
+/*
+ * Fetch mode bits as provided by SFU.
+ *
+ * FIXME: Doesn't this clobber the type bit we got from cifs_sfu_type ?
+ */
+static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,
+ struct cifs_sb_info *cifs_sb, int xid)
{
#ifdef CONFIG_CIFS_XATTR
ssize_t rc;
@@ -391,68 +367,80 @@
__u32 mode;
rc = CIFSSMBQueryEA(xid, cifs_sb->tcon, path, "SETFILEBITS",
- ea_value, 4 /* size of buf */, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ ea_value, 4 /* size of buf */, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc < 0)
return (int)rc;
else if (rc > 3) {
mode = le32_to_cpu(*((__le32 *)ea_value));
- inode->i_mode &= ~SFBITS_MASK;
- cFYI(1, ("special bits 0%o org mode 0%o", mode, inode->i_mode));
- inode->i_mode = (mode & SFBITS_MASK) | inode->i_mode;
+ fattr->cf_mode &= ~SFBITS_MASK;
+ cFYI(1, ("special bits 0%o org mode 0%o", mode,
+ fattr->cf_mode));
+ fattr->cf_mode = (mode & SFBITS_MASK) | fattr->cf_mode;
cFYI(1, ("special mode bits 0%o", mode));
- return 0;
- } else {
- return 0;
}
+
+ return 0;
#else
return -EOPNOTSUPP;
#endif
}
-/*
- * Needed to setup inode data for the directory which is the
- * junction to the new submount (ie to setup the fake directory
- * which represents a DFS referral)
- */
-static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
- struct super_block *sb)
+/* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
+static void
+cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
+ struct cifs_sb_info *cifs_sb, bool adjust_tz)
{
- memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_cifsattrs = le32_to_cpu(info->Attributes);
+ if (info->DeletePending)
+ fattr->cf_flags |= CIFS_FATTR_DELETE_PENDING;
-/* __le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
- __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
- __u8 pfnd_dat->DeletePending = 0;
- __u8 pfnd_data->Directory = 0;
- __le32 pfnd_dat->EASize = 0;
- __u64 pfnd_dat->IndexNumber = 0;
- __u64 pfnd_dat->IndexNumber1 = 0; */
- pfnd_dat->CreationTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastAccessTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->LastWriteTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->ChangeTime =
- cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
- pfnd_dat->Attributes = cpu_to_le32(ATTR_DIRECTORY);
- pfnd_dat->NumberOfLinks = cpu_to_le32(2);
+ if (info->LastAccessTime)
+ fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+ else
+ fattr->cf_atime = CURRENT_TIME;
+
+ fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
+ fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
+
+ if (adjust_tz) {
+ fattr->cf_ctime.tv_sec += cifs_sb->tcon->ses->server->timeAdj;
+ fattr->cf_mtime.tv_sec += cifs_sb->tcon->ses->server->timeAdj;
+ }
+
+ fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+ fattr->cf_bytes = le64_to_cpu(info->AllocationSize);
+
+ if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
+ fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
+ fattr->cf_dtype = DT_DIR;
+ } else {
+ fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
+ fattr->cf_dtype = DT_REG;
+
+ /* clear write bits if ATTR_READONLY is set */
+ if (fattr->cf_cifsattrs & ATTR_READONLY)
+ fattr->cf_mode &= ~(S_IWUGO);
+ }
+
+ fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ fattr->cf_gid = cifs_sb->mnt_gid;
}
int cifs_get_inode_info(struct inode **pinode,
const unsigned char *full_path, FILE_ALL_INFO *pfindData,
struct super_block *sb, int xid, const __u16 *pfid)
{
- int rc = 0;
- __u32 attr;
- struct cifsInodeInfo *cifsInfo;
+ int rc = 0, tmprc;
struct cifsTconInfo *pTcon;
- struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
char *buf = NULL;
bool adjustTZ = false;
- bool is_dfs_referral = false;
- umode_t default_mode;
+ struct cifs_fattr fattr;
pTcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", full_path));
@@ -487,164 +475,86 @@
adjustTZ = true;
}
}
- /* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
- if (rc == -EREMOTE) {
- is_dfs_referral = true;
- fill_fake_finddata(pfindData, sb);
+
+ if (!rc) {
+ cifs_all_info_to_fattr(&fattr, (FILE_ALL_INFO *) pfindData,
+ cifs_sb, adjustTZ);
+ } else if (rc == -EREMOTE) {
+ cifs_create_dfs_fattr(&fattr, sb);
rc = 0;
- } else if (rc)
+ } else {
goto cgii_exit;
+ }
- attr = le32_to_cpu(pfindData->Attributes);
-
- /* get new inode */
+ /*
+ * If an inode wasn't passed in, then get the inode number
+ *
+ * Is an i_ino of zero legal? Can we use that to check if the server
+ * supports returning inode numbers? Are there other sanity checks we
+ * can use to ensure that the server is really filling in that field?
+ *
+ * We can not use the IndexNumber field by default from Windows or
+ * Samba (in ALL_INFO buf) but we can request it explicitly. The SNIA
+ * CIFS spec claims that this value is unique within the scope of a
+ * share, and the windows docs hint that it's actually unique
+ * per-machine.
+ *
+ * There may be higher info levels that work but are there Windows
+ * server or network appliances for which IndexNumber field is not
+ * guaranteed unique?
+ */
if (*pinode == NULL) {
- __u64 inode_num;
- __u64 *pinum = &inode_num;
-
- /* Is an i_ino of zero legal? Can we use that to check
- if the server supports returning inode numbers? Are
- there other sanity checks we can use to ensure that
- the server is really filling in that field? */
-
- /* We can not use the IndexNumber field by default from
- Windows or Samba (in ALL_INFO buf) but we can request
- it explicitly. It may not be unique presumably if
- the server has multiple devices mounted under one share */
-
- /* There may be higher info levels that work but are
- there Windows server or network appliances for which
- IndexNumber field is not guaranteed unique? */
-
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
int rc1 = 0;
rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- full_path, pinum,
+ full_path, &fattr.cf_uniqueid,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc1) {
cFYI(1, ("GetSrvInodeNum rc %d", rc1));
- pinum = NULL;
- /* BB EOPNOSUPP disable SERVER_INUM? */
+ fattr.cf_uniqueid = iunique(sb, ROOT_I);
+ /* disable serverino if call not supported */
+ if (rc1 == -EINVAL)
+ cifs_sb->mnt_cifs_flags &=
+ ~CIFS_MOUNT_SERVER_INUM;
}
} else {
- pinum = NULL;
+ fattr.cf_uniqueid = iunique(sb, ROOT_I);
}
-
- *pinode = cifs_new_inode(sb, pinum);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
- }
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
- cifsInfo->cifsAttrs = attr;
- cifsInfo->delete_pending = pfindData->DeletePending ? true : false;
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
-
- /* blksize needs to be multiple of two. So safer to default to
- blksize and blkbits set in superblock so 2**blkbits and blksize
- will match rather than setting to:
- (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
- /* Linux can not store file creation time so ignore it */
- if (pfindData->LastAccessTime)
- inode->i_atime = cifs_NTtimeToUnix(pfindData->LastAccessTime);
- else /* do not need to use current_fs_time - time not stored */
- inode->i_atime = CURRENT_TIME;
- inode->i_mtime = cifs_NTtimeToUnix(pfindData->LastWriteTime);
- inode->i_ctime = cifs_NTtimeToUnix(pfindData->ChangeTime);
- cFYI(DBG2, ("Attributes came in as 0x%x", attr));
- if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
- inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
- inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
- }
-
- /* get default inode mode */
- if (attr & ATTR_DIRECTORY)
- default_mode = cifs_sb->mnt_dir_mode;
- else
- default_mode = cifs_sb->mnt_file_mode;
-
- /* set permission bits */
- if (atomic_read(&cifsInfo->inUse) == 0 ||
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
- inode->i_mode = default_mode;
- else {
- /* just reenable write bits if !ATTR_READONLY */
- if ((inode->i_mode & S_IWUGO) == 0 &&
- (attr & ATTR_READONLY) == 0)
- inode->i_mode |= (S_IWUGO & default_mode);
-
- inode->i_mode &= ~S_IFMT;
- }
- /* clear write bits if ATTR_READONLY is set */
- if (attr & ATTR_READONLY)
- inode->i_mode &= ~S_IWUGO;
-
- /* set inode type */
- if ((attr & ATTR_SYSTEM) &&
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
- /* no need to fix endianness on 0 */
- if (pfindData->EndOfFile == 0)
- inode->i_mode |= S_IFIFO;
- else if (decode_sfu_inode(inode,
- le64_to_cpu(pfindData->EndOfFile),
- full_path, cifs_sb, xid))
- cFYI(1, ("unknown SFU file type\n"));
} else {
- if (attr & ATTR_DIRECTORY)
- inode->i_mode |= S_IFDIR;
- else
- inode->i_mode |= S_IFREG;
+ fattr.cf_uniqueid = CIFS_I(*pinode)->uniqueid;
}
- cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
- spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
- /* can not safely shrink the file size here if the
- client is writing to it due to potential races */
- i_size_write(inode, cifsInfo->server_eof);
-
- /* 512 bytes (2**9) is the fake blocksize that must be
- used for this calculation */
- inode->i_blocks = (512 - 1 + le64_to_cpu(
- pfindData->AllocationSize)) >> 9;
+ /* query for SFU type info if supported and needed */
+ if (fattr.cf_cifsattrs & ATTR_SYSTEM &&
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+ tmprc = cifs_sfu_type(&fattr, full_path, cifs_sb, xid);
+ if (tmprc)
+ cFYI(1, ("cifs_sfu_type failed: %d", tmprc));
}
- spin_unlock(&inode->i_lock);
- inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
-
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
#ifdef CONFIG_CIFS_EXPERIMENTAL
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
cFYI(1, ("Getting mode bits from ACL"));
- acl_to_uid_mode(cifs_sb, inode, full_path, pfid);
+ cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
}
#endif
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- /* fill in remaining high mode bits e.g. SUID, VTX */
- get_sfu_mode(inode, full_path, cifs_sb, xid);
- } else if (atomic_read(&cifsInfo->inUse) == 0) {
- inode->i_uid = cifs_sb->mnt_uid;
- inode->i_gid = cifs_sb->mnt_gid;
- /* set so we do not keep refreshing these fields with
- bad data after user has changed them in memory */
- atomic_set(&cifsInfo->inUse, 1);
+
+ /* fill in remaining high mode bits e.g. SUID, VTX */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ cifs_sfu_mode(&fattr, full_path, cifs_sb, xid);
+
+ if (!*pinode) {
+ *pinode = cifs_iget(sb, &fattr);
+ if (!*pinode)
+ rc = -ENOMEM;
+ } else {
+ cifs_fattr_to_inode(*pinode, &fattr);
}
- cifs_set_ops(inode, is_dfs_referral);
-
-
-
-
cgii_exit:
kfree(buf);
return rc;
@@ -695,33 +605,78 @@
return full_path;
}
+static int
+cifs_find_inode(struct inode *inode, void *opaque)
+{
+ struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
+
+ if (CIFS_I(inode)->uniqueid != fattr->cf_uniqueid)
+ return 0;
+
+ return 1;
+}
+
+static int
+cifs_init_inode(struct inode *inode, void *opaque)
+{
+ struct cifs_fattr *fattr = (struct cifs_fattr *) opaque;
+
+ CIFS_I(inode)->uniqueid = fattr->cf_uniqueid;
+ return 0;
+}
+
+/* Given fattrs, get a corresponding inode */
+struct inode *
+cifs_iget(struct super_block *sb, struct cifs_fattr *fattr)
+{
+ unsigned long hash;
+ struct inode *inode;
+
+ cFYI(1, ("looking for uniqueid=%llu", fattr->cf_uniqueid));
+
+ /* hash down to 32-bits on 32-bit arch */
+ hash = cifs_uniqueid_to_ino_t(fattr->cf_uniqueid);
+
+ inode = iget5_locked(sb, hash, cifs_find_inode, cifs_init_inode, fattr);
+
+ /* we have fattrs in hand, update the inode */
+ if (inode) {
+ cifs_fattr_to_inode(inode, fattr);
+ if (sb->s_flags & MS_NOATIME)
+ inode->i_flags |= S_NOATIME | S_NOCMTIME;
+ if (inode->i_state & I_NEW) {
+ inode->i_ino = hash;
+ unlock_new_inode(inode);
+ }
+ }
+
+ return inode;
+}
+
/* gets root inode */
struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
{
int xid;
struct cifs_sb_info *cifs_sb;
- struct inode *inode;
+ struct inode *inode = NULL;
long rc;
char *full_path;
- inode = iget_locked(sb, ino);
- if (!inode)
- return ERR_PTR(-ENOMEM);
- if (!(inode->i_state & I_NEW))
- return inode;
-
- cifs_sb = CIFS_SB(inode->i_sb);
+ cifs_sb = CIFS_SB(sb);
full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
xid = GetXid();
if (cifs_sb->tcon->unix_ext)
- rc = cifs_get_inode_info_unix(&inode, full_path, inode->i_sb,
- xid);
+ rc = cifs_get_inode_info_unix(&inode, full_path, sb, xid);
else
- rc = cifs_get_inode_info(&inode, full_path, NULL, inode->i_sb,
+ rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
xid, NULL);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
if (rc && cifs_sb->tcon->ipc) {
cFYI(1, ("ipc connection - fake read inode"));
inode->i_mode |= S_IFDIR;
@@ -737,7 +692,6 @@
return ERR_PTR(rc);
}
- unlock_new_inode(inode);
kfree(full_path);
/* can not call macro FreeXid here since in a void func
@@ -988,8 +942,9 @@
* sb->s_vfs_rename_mutex here */
full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if ((tcon->ses->capabilities & CAP_UNIX) &&
@@ -1062,44 +1017,6 @@
return rc;
}
-void posix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_BASIC_INFO *pData, int isNewInode)
-{
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- loff_t local_size;
- struct timespec local_mtime;
-
- cifsInfo->time = jiffies;
- atomic_inc(&cifsInfo->inUse);
-
- /* save mtime and size */
- local_mtime = tmp_inode->i_mtime;
- local_size = tmp_inode->i_size;
-
- cifs_unix_info_to_inode(tmp_inode, pData, 1);
- cifs_set_ops(tmp_inode, false);
-
- if (!S_ISREG(tmp_inode->i_mode))
- return;
-
- /*
- * No sense invalidating pages for new inode
- * since we we have not started caching
- * readahead file data yet.
- */
- if (isNewInode)
- return;
-
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
-}
-
int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
{
int rc = 0, tmprc;
@@ -1108,6 +1025,7 @@
struct cifsTconInfo *pTcon;
char *full_path = NULL;
struct inode *newinode = NULL;
+ struct cifs_fattr fattr;
cFYI(1, ("In cifs_mkdir, mode = 0x%x inode = 0x%p", mode, inode));
@@ -1118,8 +1036,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if ((pTcon->ses->capabilities & CAP_UNIX) &&
@@ -1146,7 +1065,6 @@
cFYI(1, ("posix mkdir returned 0x%x", rc));
d_drop(direntry);
} else {
- __u64 unique_id;
if (pInfo->Type == cpu_to_le32(-1)) {
/* no return info, go query for it */
kfree(pInfo);
@@ -1160,20 +1078,15 @@
else
direntry->d_op = &cifs_dentry_ops;
- unique_id = le64_to_cpu(pInfo->UniqueId);
- newinode = cifs_new_inode(inode->i_sb, &unique_id);
- if (newinode == NULL) {
+ cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
+ newinode = cifs_iget(inode->i_sb, &fattr);
+ if (!newinode) {
kfree(pInfo);
goto mkdir_get_info;
}
- newinode->i_nlink = 2;
d_instantiate(direntry, newinode);
- /* we already checked in POSIXCreate whether
- frame was long enough */
- posix_fill_in_inode(direntry->d_inode,
- pInfo, 1 /* NewInode */);
#ifdef CONFIG_CIFS_DEBUG2
cFYI(1, ("instantiated dentry %p %s to inode %p",
direntry, direntry->d_name.name, newinode));
@@ -1236,10 +1149,10 @@
args.uid = NO_CHANGE_64;
args.gid = NO_CHANGE_64;
}
- CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
(mode & S_IWUGO) == 0) {
@@ -1303,8 +1216,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls,
@@ -1508,8 +1422,9 @@
since that would deadlock */
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
"jiffies %ld", full_path, direntry->d_inode,
@@ -1618,6 +1533,7 @@
if (!err) {
generic_fillattr(dentry->d_inode, stat);
stat->blksize = CIFS_MAX_MSGSIZE;
+ stat->ino = CIFS_I(dentry->d_inode)->uniqueid;
}
return err;
}
@@ -1782,6 +1698,7 @@
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct cifsTconInfo *pTcon = cifs_sb->tcon;
struct cifs_unix_set_info_args *args = NULL;
+ struct cifsFileInfo *open_file;
cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x",
direntry->d_name.name, attrs->ia_valid));
@@ -1868,10 +1785,18 @@
args->ctime = NO_CHANGE_64;
args->device = 0;
- rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ open_file = find_writable_file(cifsInode);
+ if (open_file) {
+ u16 nfid = open_file->netfid;
+ u32 npid = open_file->pid;
+ rc = CIFSSMBUnixSetFileInfo(xid, pTcon, args, nfid, npid);
+ atomic_dec(&open_file->wrtPending);
+ } else {
+ rc = CIFSSMBUnixSetPathInfo(xid, pTcon, full_path, args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ }
if (!rc)
rc = inode_setattr(inode, attrs);
@@ -1911,8 +1836,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/*
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index cd83c53..fc1e048 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -172,8 +172,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("Full path: %s", full_path));
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 32d6baa..bd6d689 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -133,10 +133,12 @@
{0, 0}
};
-/* Convert string containing dotted ip address to binary form */
-/* returns 0 if invalid address */
-
-int
+/*
+ * Convert a string containing text IPv4 or IPv6 address to binary form.
+ *
+ * Returns 0 on failure.
+ */
+static int
cifs_inet_pton(const int address_family, const char *cp, void *dst)
{
int ret = 0;
@@ -153,6 +155,52 @@
return ret;
}
+/*
+ * Try to convert a string to an IPv4 address and then attempt to convert
+ * it to an IPv6 address if that fails. Set the family field if either
+ * succeeds. If it's an IPv6 address and it has a '%' sign in it, try to
+ * treat the part following it as a numeric sin6_scope_id.
+ *
+ * Returns 0 on failure.
+ */
+int
+cifs_convert_address(char *src, void *dst)
+{
+ int rc;
+ char *pct, *endp;
+ struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
+ struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
+
+ /* IPv4 address */
+ if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) {
+ s4->sin_family = AF_INET;
+ return 1;
+ }
+
+ /* temporarily terminate string */
+ pct = strchr(src, '%');
+ if (pct)
+ *pct = '\0';
+
+ rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr);
+
+ /* repair temp termination (if any) and make pct point to scopeid */
+ if (pct)
+ *pct++ = '%';
+
+ if (!rc)
+ return rc;
+
+ s6->sin6_family = AF_INET6;
+ if (pct) {
+ s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
+ if (!*pct || *endp)
+ return 0;
+ }
+
+ return rc;
+}
+
/*****************************************************************************
convert a NT status code to a dos class/code
*****************************************************************************/
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 86d0055..f823a4a 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -63,374 +63,123 @@
}
#endif /* DEBUG2 */
-/* Returns 1 if new inode created, 2 if both dentry and inode were */
-/* Might check in the future if inode number changed so we can rehash inode */
-static int
-construct_dentry(struct qstr *qstring, struct file *file,
- struct inode **ptmp_inode, struct dentry **pnew_dentry,
- __u64 *inum)
+/*
+ * Find the dentry that matches "name". If there isn't one, create one. If it's
+ * a negative dentry or the uniqueid changed, then drop it and recreate it.
+ */
+static struct dentry *
+cifs_readdir_lookup(struct dentry *parent, struct qstr *name,
+ struct cifs_fattr *fattr)
{
- struct dentry *tmp_dentry = NULL;
- struct super_block *sb = file->f_path.dentry->d_sb;
- int rc = 0;
+ struct dentry *dentry, *alias;
+ struct inode *inode;
+ struct super_block *sb = parent->d_inode->i_sb;
- cFYI(1, ("For %s", qstring->name));
+ cFYI(1, ("For %s", name->name));
- qstring->hash = full_name_hash(qstring->name, qstring->len);
- tmp_dentry = d_lookup(file->f_path.dentry, qstring);
- if (tmp_dentry) {
- /* BB: overwrite old name? i.e. tmp_dentry->d_name and
- * tmp_dentry->d_name.len??
- */
- cFYI(0, ("existing dentry with inode 0x%p",
- tmp_dentry->d_inode));
- *ptmp_inode = tmp_dentry->d_inode;
- if (*ptmp_inode == NULL) {
- *ptmp_inode = cifs_new_inode(sb, inum);
- if (*ptmp_inode == NULL)
- return rc;
- rc = 1;
- }
- } else {
- tmp_dentry = d_alloc(file->f_path.dentry, qstring);
- if (tmp_dentry == NULL) {
- cERROR(1, ("Failed allocating dentry"));
- *ptmp_inode = NULL;
- return rc;
- }
-
- if (CIFS_SB(sb)->tcon->nocase)
- tmp_dentry->d_op = &cifs_ci_dentry_ops;
- else
- tmp_dentry->d_op = &cifs_dentry_ops;
-
- *ptmp_inode = cifs_new_inode(sb, inum);
- if (*ptmp_inode == NULL)
- return rc;
- rc = 2;
+ dentry = d_lookup(parent, name);
+ if (dentry) {
+ /* FIXME: check for inode number changes? */
+ if (dentry->d_inode != NULL)
+ return dentry;
+ d_drop(dentry);
+ dput(dentry);
}
- tmp_dentry->d_time = jiffies;
- *pnew_dentry = tmp_dentry;
- return rc;
+ dentry = d_alloc(parent, name);
+ if (dentry == NULL)
+ return NULL;
+
+ inode = cifs_iget(sb, fattr);
+ if (!inode) {
+ dput(dentry);
+ return NULL;
+ }
+
+ if (CIFS_SB(sb)->tcon->nocase)
+ dentry->d_op = &cifs_ci_dentry_ops;
+ else
+ dentry->d_op = &cifs_dentry_ops;
+
+ alias = d_materialise_unique(dentry, inode);
+ if (alias != NULL) {
+ dput(dentry);
+ if (IS_ERR(alias))
+ return NULL;
+ dentry = alias;
+ }
+
+ return dentry;
}
-static void fill_in_inode(struct inode *tmp_inode, int new_buf_type,
- char *buf, unsigned int *pobject_type, int isNewInode)
+static void
+cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)
{
- loff_t local_size;
- struct timespec local_mtime;
+ fattr->cf_uid = cifs_sb->mnt_uid;
+ fattr->cf_gid = cifs_sb->mnt_gid;
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
- __u32 attr;
- __u64 allocation_size;
- __u64 end_of_file;
- umode_t default_mode;
-
- /* save mtime and size */
- local_mtime = tmp_inode->i_mtime;
- local_size = tmp_inode->i_size;
-
- if (new_buf_type) {
- FILE_DIRECTORY_INFO *pfindData = (FILE_DIRECTORY_INFO *)buf;
-
- attr = le32_to_cpu(pfindData->ExtFileAttributes);
- allocation_size = le64_to_cpu(pfindData->AllocationSize);
- end_of_file = le64_to_cpu(pfindData->EndOfFile);
- tmp_inode->i_atime =
- cifs_NTtimeToUnix(pfindData->LastAccessTime);
- tmp_inode->i_mtime =
- cifs_NTtimeToUnix(pfindData->LastWriteTime);
- tmp_inode->i_ctime =
- cifs_NTtimeToUnix(pfindData->ChangeTime);
- } else { /* legacy, OS2 and DOS style */
- int offset = cifs_sb->tcon->ses->server->timeAdj;
- FIND_FILE_STANDARD_INFO *pfindData =
- (FIND_FILE_STANDARD_INFO *)buf;
-
- tmp_inode->i_mtime = cnvrtDosUnixTm(pfindData->LastWriteDate,
- pfindData->LastWriteTime,
- offset);
- tmp_inode->i_atime = cnvrtDosUnixTm(pfindData->LastAccessDate,
- pfindData->LastAccessTime,
- offset);
- tmp_inode->i_ctime = cnvrtDosUnixTm(pfindData->LastWriteDate,
- pfindData->LastWriteTime,
- offset);
- attr = le16_to_cpu(pfindData->Attributes);
- allocation_size = le32_to_cpu(pfindData->AllocationSize);
- end_of_file = le32_to_cpu(pfindData->DataSize);
+ if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
+ fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
+ fattr->cf_dtype = DT_DIR;
+ } else {
+ fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
+ fattr->cf_dtype = DT_REG;
}
- /* Linux can not store file creation time unfortunately so ignore it */
+ if (fattr->cf_cifsattrs & ATTR_READONLY)
+ fattr->cf_mode &= ~S_IWUGO;
- cifsInfo->cifsAttrs = attr;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- /* get more accurate mode via ACL - so force inode refresh */
- cifsInfo->time = 0;
- } else
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
- cifsInfo->time = jiffies;
-
- /* treat dos attribute of read-only as read-only mode bit e.g. 555? */
- /* 2767 perms - indicate mandatory locking */
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
- if (atomic_read(&cifsInfo->inUse) == 0) {
- tmp_inode->i_uid = cifs_sb->mnt_uid;
- tmp_inode->i_gid = cifs_sb->mnt_gid;
- }
-
- if (attr & ATTR_DIRECTORY)
- default_mode = cifs_sb->mnt_dir_mode;
- else
- default_mode = cifs_sb->mnt_file_mode;
-
- /* set initial permissions */
- if ((atomic_read(&cifsInfo->inUse) == 0) ||
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
- tmp_inode->i_mode = default_mode;
- else {
- /* just reenable write bits if !ATTR_READONLY */
- if ((tmp_inode->i_mode & S_IWUGO) == 0 &&
- (attr & ATTR_READONLY) == 0)
- tmp_inode->i_mode |= (S_IWUGO & default_mode);
-
- tmp_inode->i_mode &= ~S_IFMT;
- }
-
- /* clear write bits if ATTR_READONLY is set */
- if (attr & ATTR_READONLY)
- tmp_inode->i_mode &= ~S_IWUGO;
-
- /* set inode type */
- if ((attr & ATTR_SYSTEM) &&
- (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
- if (end_of_file == 0) {
- tmp_inode->i_mode |= S_IFIFO;
- *pobject_type = DT_FIFO;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL &&
+ fattr->cf_cifsattrs & ATTR_SYSTEM) {
+ if (fattr->cf_eof == 0) {
+ fattr->cf_mode &= ~S_IFMT;
+ fattr->cf_mode |= S_IFIFO;
+ fattr->cf_dtype = DT_FIFO;
} else {
/*
- * trying to get the type can be slow, so just call
- * this a regular file for now, and mark for reval
+ * trying to get the type and mode via SFU can be slow,
+ * so just call those regular files for now, and mark
+ * for reval
*/
- tmp_inode->i_mode |= S_IFREG;
- *pobject_type = DT_REG;
- cifsInfo->time = 0;
+ fattr->cf_flags |= CIFS_FATTR_NEED_REVAL;
}
- } else {
- if (attr & ATTR_DIRECTORY) {
- tmp_inode->i_mode |= S_IFDIR;
- *pobject_type = DT_DIR;
- } else {
- tmp_inode->i_mode |= S_IFREG;
- *pobject_type = DT_REG;
- }
- }
-
- /* can not fill in nlink here as in qpathinfo version and Unx search */
- if (atomic_read(&cifsInfo->inUse) == 0)
- atomic_set(&cifsInfo->inUse, 1);
-
- cifsInfo->server_eof = end_of_file;
- spin_lock(&tmp_inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /* can not safely change the file size here if the
- client is writing to it due to potential races */
- i_size_write(tmp_inode, end_of_file);
-
- /* 512 bytes (2**9) is the fake blocksize that must be used */
- /* for this calculation, even though the reported blocksize is larger */
- tmp_inode->i_blocks = (512 - 1 + allocation_size) >> 9;
- }
- spin_unlock(&tmp_inode->i_lock);
-
- if (allocation_size < end_of_file)
- cFYI(1, ("May be sparse file, allocation less than file size"));
- cFYI(1, ("File Size %ld and blocks %llu",
- (unsigned long)tmp_inode->i_size,
- (unsigned long long)tmp_inode->i_blocks));
- if (S_ISREG(tmp_inode->i_mode)) {
- cFYI(1, ("File inode"));
- tmp_inode->i_op = &cifs_file_inode_ops;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_direct_ops;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_ops;
-
- if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
- (cifs_sb->tcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
- tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
- if (isNewInode)
- return; /* No sense invalidating pages for new inode
- since have not started caching readahead file
- data yet */
-
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
- } else if (S_ISDIR(tmp_inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- tmp_inode->i_op = &cifs_dir_inode_ops;
- tmp_inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(tmp_inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- tmp_inode->i_op = &cifs_symlink_inode_ops;
- } else {
- cFYI(1, ("Init special inode"));
- init_special_inode(tmp_inode, tmp_inode->i_mode,
- tmp_inode->i_rdev);
}
}
-static void unix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_INFO *pfindData, unsigned int *pobject_type, int isNewInode)
+void
+cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
+ struct cifs_sb_info *cifs_sb)
{
- loff_t local_size;
- struct timespec local_mtime;
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_cifsattrs = le32_to_cpu(info->ExtFileAttributes);
+ fattr->cf_eof = le64_to_cpu(info->EndOfFile);
+ fattr->cf_bytes = le64_to_cpu(info->AllocationSize);
+ fattr->cf_atime = cifs_NTtimeToUnix(info->LastAccessTime);
+ fattr->cf_ctime = cifs_NTtimeToUnix(info->ChangeTime);
+ fattr->cf_mtime = cifs_NTtimeToUnix(info->LastWriteTime);
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
+ cifs_fill_common_info(fattr, cifs_sb);
+}
- __u32 type = le32_to_cpu(pfindData->Type);
- __u64 num_of_bytes = le64_to_cpu(pfindData->NumOfBytes);
- __u64 end_of_file = le64_to_cpu(pfindData->EndOfFile);
- cifsInfo->time = jiffies;
- atomic_inc(&cifsInfo->inUse);
+void
+cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
+ struct cifs_sb_info *cifs_sb)
+{
+ int offset = cifs_sb->tcon->ses->server->timeAdj;
- /* save mtime and size */
- local_mtime = tmp_inode->i_mtime;
- local_size = tmp_inode->i_size;
+ memset(fattr, 0, sizeof(*fattr));
+ fattr->cf_atime = cnvrtDosUnixTm(info->LastAccessDate,
+ info->LastAccessTime, offset);
+ fattr->cf_ctime = cnvrtDosUnixTm(info->LastWriteDate,
+ info->LastWriteTime, offset);
+ fattr->cf_mtime = cnvrtDosUnixTm(info->LastWriteDate,
+ info->LastWriteTime, offset);
- tmp_inode->i_atime =
- cifs_NTtimeToUnix(pfindData->LastAccessTime);
- tmp_inode->i_mtime =
- cifs_NTtimeToUnix(pfindData->LastModificationTime);
- tmp_inode->i_ctime =
- cifs_NTtimeToUnix(pfindData->LastStatusChange);
+ fattr->cf_cifsattrs = le16_to_cpu(info->Attributes);
+ fattr->cf_bytes = le32_to_cpu(info->AllocationSize);
+ fattr->cf_eof = le32_to_cpu(info->DataSize);
- tmp_inode->i_mode = le64_to_cpu(pfindData->Permissions);
- /* since we set the inode type below we need to mask off type
- to avoid strange results if bits above were corrupt */
- tmp_inode->i_mode &= ~S_IFMT;
- if (type == UNIX_FILE) {
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- } else if (type == UNIX_SYMLINK) {
- *pobject_type = DT_LNK;
- tmp_inode->i_mode |= S_IFLNK;
- } else if (type == UNIX_DIR) {
- *pobject_type = DT_DIR;
- tmp_inode->i_mode |= S_IFDIR;
- } else if (type == UNIX_CHARDEV) {
- *pobject_type = DT_CHR;
- tmp_inode->i_mode |= S_IFCHR;
- tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
- le64_to_cpu(pfindData->DevMinor) & MINORMASK);
- } else if (type == UNIX_BLOCKDEV) {
- *pobject_type = DT_BLK;
- tmp_inode->i_mode |= S_IFBLK;
- tmp_inode->i_rdev = MKDEV(le64_to_cpu(pfindData->DevMajor),
- le64_to_cpu(pfindData->DevMinor) & MINORMASK);
- } else if (type == UNIX_FIFO) {
- *pobject_type = DT_FIFO;
- tmp_inode->i_mode |= S_IFIFO;
- } else if (type == UNIX_SOCKET) {
- *pobject_type = DT_SOCK;
- tmp_inode->i_mode |= S_IFSOCK;
- } else {
- /* safest to just call it a file */
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- cFYI(1, ("unknown inode type %d", type));
- }
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
- tmp_inode->i_uid = cifs_sb->mnt_uid;
- else
- tmp_inode->i_uid = le64_to_cpu(pfindData->Uid);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
- tmp_inode->i_gid = cifs_sb->mnt_gid;
- else
- tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
- tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
-
- cifsInfo->server_eof = end_of_file;
- spin_lock(&tmp_inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /* can not safely change the file size here if the
- client is writing to it due to potential races */
- i_size_write(tmp_inode, end_of_file);
-
- /* 512 bytes (2**9) is the fake blocksize that must be used */
- /* for this calculation, not the real blocksize */
- tmp_inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
- }
- spin_unlock(&tmp_inode->i_lock);
-
- if (S_ISREG(tmp_inode->i_mode)) {
- cFYI(1, ("File inode"));
- tmp_inode->i_op = &cifs_file_inode_ops;
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_direct_ops;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_ops;
-
- if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
- (cifs_sb->tcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
- tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
- if (isNewInode)
- return; /* No sense invalidating pages for new inode
- since we have not started caching readahead
- file data for it yet */
-
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
- } else if (S_ISDIR(tmp_inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- tmp_inode->i_op = &cifs_dir_inode_ops;
- tmp_inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(tmp_inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- tmp_inode->i_op = &cifs_symlink_inode_ops;
-/* tmp_inode->i_fop = *//* do not need to set to anything */
- } else {
- cFYI(1, ("Special inode"));
- init_special_inode(tmp_inode, tmp_inode->i_mode,
- tmp_inode->i_rdev);
- }
+ cifs_fill_common_info(fattr, cifs_sb);
}
/* BB eventually need to add the following helper function to
@@ -872,7 +621,7 @@
len = strnlen(filename, PATH_MAX);
}
- *pinum = le64_to_cpu(pFindData->UniqueId);
+ *pinum = le64_to_cpu(pFindData->basic.UniqueId);
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
@@ -932,11 +681,12 @@
int rc = 0;
struct qstr qstring;
struct cifsFileInfo *pCifsF;
- unsigned int obj_type;
- __u64 inum;
+ u64 inum;
+ ino_t ino;
+ struct super_block *sb;
struct cifs_sb_info *cifs_sb;
- struct inode *tmp_inode;
struct dentry *tmp_dentry;
+ struct cifs_fattr fattr;
/* get filename and len into qstring */
/* get dentry */
@@ -954,60 +704,53 @@
if (rc != 0)
return 0;
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
+ sb = file->f_path.dentry->d_sb;
+ cifs_sb = CIFS_SB(sb);
qstring.name = scratch_buf;
rc = cifs_get_name_from_search_buf(&qstring, pfindEntry,
pCifsF->srch_inf.info_level,
pCifsF->srch_inf.unicode, cifs_sb,
- max_len,
- &inum /* returned */);
+ max_len, &inum /* returned */);
if (rc)
return rc;
- /* only these two infolevels return valid inode numbers */
- if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX ||
- pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
- rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
- &inum);
- else
- rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
- NULL);
-
- if ((tmp_inode == NULL) || (tmp_dentry == NULL))
- return -ENOMEM;
-
- /* we pass in rc below, indicating whether it is a new inode,
- so we can figure out whether to invalidate the inode cached
- data if the file has changed */
if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX)
- unix_fill_in_inode(tmp_inode,
- (FILE_UNIX_INFO *)pfindEntry,
- &obj_type, rc);
+ cifs_unix_basic_to_fattr(&fattr,
+ &((FILE_UNIX_INFO *) pfindEntry)->basic,
+ cifs_sb);
else if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_INFO_STANDARD)
- fill_in_inode(tmp_inode, 0 /* old level 1 buffer type */,
- pfindEntry, &obj_type, rc);
+ cifs_std_info_to_fattr(&fattr, (FIND_FILE_STANDARD_INFO *)
+ pfindEntry, cifs_sb);
else
- fill_in_inode(tmp_inode, 1 /* NT */, pfindEntry, &obj_type, rc);
+ cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *)
+ pfindEntry, cifs_sb);
- if (rc) /* new inode - needs to be tied to dentry */ {
- d_instantiate(tmp_dentry, tmp_inode);
- if (rc == 2)
- d_rehash(tmp_dentry);
- }
+ /* FIXME: make _to_fattr functions fill this out */
+ if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+ fattr.cf_uniqueid = inum;
+ else
+ fattr.cf_uniqueid = iunique(sb, ROOT_I);
+ ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid);
+ tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr);
rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
- tmp_inode->i_ino, obj_type);
+ ino, fattr.cf_dtype);
+
+ /*
+ * we can not return filldir errors to the caller since they are
+ * "normal" when the stat blocksize is too small - we return remapped
+ * error instead
+ *
+ * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
+ * case already. Why should we be clobbering other errors from it?
+ */
if (rc) {
cFYI(1, ("filldir rc = %d", rc));
- /* we can not return filldir errors to the caller
- since they are "normal" when the stat blocksize
- is too small - we return remapped error instead */
rc = -EOVERFLOW;
}
-
dput(tmp_dentry);
return rc;
}
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 897a052..7085a62 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -802,7 +802,7 @@
#endif /* CONFIG_CIFS_UPCALL */
} else {
#ifdef CONFIG_CIFS_EXPERIMENTAL
- if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if (type == RawNTLMSSP) {
if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
cERROR(1, ("NTLMSSP requires Unicode support"));
rc = -ENOSYS;
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index e9527ee..a75afa3 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -64,8 +64,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if (ea_name == NULL) {
cFYI(1, ("Null xattr names not supported"));
@@ -118,8 +119,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
@@ -225,8 +227,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
@@ -351,8 +354,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
diff --git a/fs/compat.c b/fs/compat.c
index cdd51a3..94502da 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -32,7 +32,6 @@
#include <linux/smb_mount.h>
#include <linux/ncp_mount.h>
#include <linux/nfs4_mount.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
#include <linux/module.h>
@@ -1486,8 +1485,8 @@
if (!bprm)
goto out_files;
- retval = mutex_lock_interruptible(¤t->cred_guard_mutex);
- if (retval < 0)
+ retval = -ERESTARTNOINTR;
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
goto out_free;
current->in_execve = 1;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 626c748..f91fd51b 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -19,6 +19,7 @@
#include <linux/compiler.h>
#include <linux/sched.h>
#include <linux/smp.h>
+#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#include <linux/if.h>
#include <linux/if_bridge.h>
@@ -1904,6 +1905,7 @@
COMPATIBLE_IOCTL(FIOASYNC)
COMPATIBLE_IOCTL(FIONBIO)
COMPATIBLE_IOCTL(FIONREAD) /* This is also TIOCINQ */
+COMPATIBLE_IOCTL(FS_IOC_FIEMAP)
/* 0x00 */
COMPATIBLE_IOCTL(FIBMAP)
COMPATIBLE_IOCTL(FIGETBSZ)
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 205ec95..eb507c4 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -435,7 +435,7 @@
static int find_rsb(struct dlm_ls *ls, char *name, int namelen,
unsigned int flags, struct dlm_rsb **r_ret)
{
- struct dlm_rsb *r, *tmp;
+ struct dlm_rsb *r = NULL, *tmp;
uint32_t hash, bucket;
int error = -EINVAL;
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index cdb580a..618a60f 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -902,7 +902,7 @@
int result = -EHOSTUNREACH;
struct sockaddr_storage saddr, src_addr;
int addr_len;
- struct socket *sock;
+ struct socket *sock = NULL;
if (con->nodeid == 0) {
log_print("attempt to connect sock 0 foiled");
@@ -962,6 +962,8 @@
if (con->sock) {
sock_release(con->sock);
con->sock = NULL;
+ } else if (sock) {
+ sock_release(sock);
}
/*
* Some errors are fatal and this list might need adjusting. For other
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index 894a32d..16f682e 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -353,7 +353,7 @@
{
struct dlm_plock_info info;
struct plock_op *op;
- int found = 0;
+ int found = 0, do_callback = 0;
if (count != sizeof(info))
return -EINVAL;
@@ -366,21 +366,24 @@
spin_lock(&ops_lock);
list_for_each_entry(op, &recv_list, list) {
- if (op->info.fsid == info.fsid && op->info.number == info.number &&
+ if (op->info.fsid == info.fsid &&
+ op->info.number == info.number &&
op->info.owner == info.owner) {
+ struct plock_xop *xop = (struct plock_xop *)op;
list_del_init(&op->list);
- found = 1;
- op->done = 1;
memcpy(&op->info, &info, sizeof(info));
+ if (xop->callback)
+ do_callback = 1;
+ else
+ op->done = 1;
+ found = 1;
break;
}
}
spin_unlock(&ops_lock);
if (found) {
- struct plock_xop *xop;
- xop = (struct plock_xop *)op;
- if (xop->callback)
+ if (do_callback)
dlm_plock_callback(op);
else
wake_up(&recv_wq);
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index af737bb..259525c9 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -1303,6 +1303,13 @@
}
(*new_auth_tok)->session_key.encrypted_key_size =
(body_size - (ECRYPTFS_SALT_SIZE + 5));
+ if ((*new_auth_tok)->session_key.encrypted_key_size
+ > ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES) {
+ printk(KERN_WARNING "Tag 3 packet contains key larger "
+ "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES\n");
+ rc = -EINVAL;
+ goto out_free;
+ }
if (unlikely(data[(*packet_size)++] != 0x04)) {
printk(KERN_WARNING "Unknown version number [%d]\n",
data[(*packet_size) - 1]);
@@ -1449,6 +1456,12 @@
rc = -EINVAL;
goto out;
}
+ if (unlikely((*tag_11_contents_size) > max_contents_bytes)) {
+ printk(KERN_ERR "Literal data section in tag 11 packet exceeds "
+ "expected size\n");
+ rc = -EINVAL;
+ goto out;
+ }
if (data[(*packet_size)++] != 0x62) {
printk(KERN_WARNING "Unrecognizable packet\n");
rc = -EINVAL;
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 3f0e197..31d12de8 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -14,35 +14,44 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/anon_inodes.h>
-#include <linux/eventfd.h>
#include <linux/syscalls.h>
#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/eventfd.h>
struct eventfd_ctx {
+ struct kref kref;
wait_queue_head_t wqh;
/*
* Every time that a write(2) is performed on an eventfd, the
* value of the __u64 being written is added to "count" and a
* wakeup is performed on "wqh". A read(2) will return the "count"
* value to userspace, and will reset "count" to zero. The kernel
- * size eventfd_signal() also, adds to the "count" counter and
+ * side eventfd_signal() also, adds to the "count" counter and
* issue a wakeup.
*/
__u64 count;
unsigned int flags;
};
-/*
- * Adds "n" to the eventfd counter "count". Returns "n" in case of
- * success, or a value lower then "n" in case of coutner overflow.
- * This function is supposed to be called by the kernel in paths
- * that do not allow sleeping. In this function we allow the counter
- * to reach the ULLONG_MAX value, and we signal this as overflow
- * condition by returining a POLLERR to poll(2).
+/**
+ * eventfd_signal - Adds @n to the eventfd counter.
+ * @ctx: [in] Pointer to the eventfd context.
+ * @n: [in] Value of the counter to be added to the eventfd internal counter.
+ * The value cannot be negative.
+ *
+ * This function is supposed to be called by the kernel in paths that do not
+ * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX
+ * value, and we signal this as overflow condition by returining a POLLERR
+ * to poll(2).
+ *
+ * Returns @n in case of success, a non-negative number lower than @n in case
+ * of overflow, or the following error codes:
+ *
+ * -EINVAL : The value of @n is negative.
*/
-int eventfd_signal(struct file *file, int n)
+int eventfd_signal(struct eventfd_ctx *ctx, int n)
{
- struct eventfd_ctx *ctx = file->private_data;
unsigned long flags;
if (n < 0)
@@ -59,9 +68,45 @@
}
EXPORT_SYMBOL_GPL(eventfd_signal);
+static void eventfd_free(struct kref *kref)
+{
+ struct eventfd_ctx *ctx = container_of(kref, struct eventfd_ctx, kref);
+
+ kfree(ctx);
+}
+
+/**
+ * eventfd_ctx_get - Acquires a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to the eventfd context.
+ *
+ * Returns: In case of success, returns a pointer to the eventfd context.
+ */
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx)
+{
+ kref_get(&ctx->kref);
+ return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_get);
+
+/**
+ * eventfd_ctx_put - Releases a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to eventfd context.
+ *
+ * The eventfd context reference must have been previously acquired either
+ * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ */
+void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+ kref_put(&ctx->kref, eventfd_free);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_put);
+
static int eventfd_release(struct inode *inode, struct file *file)
{
- kfree(file->private_data);
+ struct eventfd_ctx *ctx = file->private_data;
+
+ wake_up_poll(&ctx->wqh, POLLHUP);
+ eventfd_ctx_put(ctx);
return 0;
}
@@ -185,6 +230,16 @@
.write = eventfd_write,
};
+/**
+ * eventfd_fget - Acquire a reference of an eventfd file descriptor.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the eventfd file structure in case of success, or the
+ * following error pointer:
+ *
+ * -EBADF : Invalid @fd file descriptor.
+ * -EINVAL : The @fd file descriptor is not an eventfd file.
+ */
struct file *eventfd_fget(int fd)
{
struct file *file;
@@ -201,6 +256,48 @@
}
EXPORT_SYMBOL_GPL(eventfd_fget);
+/**
+ * eventfd_ctx_fdget - Acquires a reference to the internal eventfd context.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointers returned by the following functions:
+ *
+ * eventfd_fget
+ */
+struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+ struct file *file;
+ struct eventfd_ctx *ctx;
+
+ file = eventfd_fget(fd);
+ if (IS_ERR(file))
+ return (struct eventfd_ctx *) file;
+ ctx = eventfd_ctx_get(file->private_data);
+ fput(file);
+
+ return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fdget);
+
+/**
+ * eventfd_ctx_fileget - Acquires a reference to the internal eventfd context.
+ * @file: [in] Eventfd file pointer.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointer:
+ *
+ * -EINVAL : The @fd file descriptor is not an eventfd file.
+ */
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file)
+{
+ if (file->f_op != &eventfd_fops)
+ return ERR_PTR(-EINVAL);
+
+ return eventfd_ctx_get(file->private_data);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fileget);
+
SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
{
int fd;
@@ -217,6 +314,7 @@
if (!ctx)
return -ENOMEM;
+ kref_init(&ctx->kref);
init_waitqueue_head(&ctx->wqh);
ctx->count = count;
ctx->flags = flags;
diff --git a/fs/exec.c b/fs/exec.c
index e639957..4a8849e 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1277,8 +1277,8 @@
if (!bprm)
goto out_files;
- retval = mutex_lock_interruptible(¤t->cred_guard_mutex);
- if (retval < 0)
+ retval = -ERESTARTNOINTR;
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
goto out_free;
current->in_execve = 1;
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index 24667ee..c6718e4 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -2,9 +2,7 @@
* common.h - Common definitions for both Kernel and user-mode utilities
*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/dir.c b/fs/exofs/dir.c
index 65b0c8c..4cfab1c 100644
--- a/fs/exofs/dir.c
+++ b/fs/exofs/dir.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 0fd4c785..5ec72e0 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -156,6 +154,9 @@
int exofs_set_link(struct inode *, struct exofs_dir_entry *, struct page *,
struct inode *);
+/* super.c */
+int exofs_sync_fs(struct super_block *sb, int wait);
+
/*********************
* operation vectors *
*********************/
diff --git a/fs/exofs/file.c b/fs/exofs/file.c
index 6ed7fe4..839b9dc 100644
--- a/fs/exofs/file.c
+++ b/fs/exofs/file.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -47,16 +45,23 @@
{
int ret;
struct address_space *mapping = filp->f_mapping;
+ struct inode *inode = dentry->d_inode;
+ struct super_block *sb;
ret = filemap_write_and_wait(mapping);
if (ret)
return ret;
- /*Note: file_fsync below also calles sync_blockdev, which is a no-op
- * for exofs, but other then that it does sync_inode and
- * sync_superblock which is what we need here.
- */
- return file_fsync(filp, dentry, datasync);
+ /* sync the inode attributes */
+ ret = write_inode_now(inode, 1);
+
+ /* This is a good place to write the sb */
+ /* TODO: Sechedule an sb-sync on create */
+ sb = inode->i_sb;
+ if (sb->s_dirt)
+ exofs_sync_fs(sb, 1);
+
+ return ret;
}
static int exofs_flush(struct file *file, fl_owner_t id)
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 77d0a29..6c10f74 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -295,6 +293,9 @@
err:
if (!is_sync)
_unlock_pcol_pages(pcol, ret, READ);
+ else /* Pages unlocked by caller in sync mode only free bio */
+ pcol_free(pcol);
+
kfree(pcol_copy);
if (or)
osd_end_request(or);
diff --git a/fs/exofs/namei.c b/fs/exofs/namei.c
index 77fdd76..b7dd0c2 100644
--- a/fs/exofs/namei.c
+++ b/fs/exofs/namei.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index b3d2ccb..4372542 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 8216c5b..5ab10c3 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
@@ -33,6 +31,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/parser.h>
#include <linux/vfs.h>
@@ -200,7 +199,7 @@
/*
* Write the superblock to the OSD
*/
-static int exofs_sync_fs(struct super_block *sb, int wait)
+int exofs_sync_fs(struct super_block *sb, int wait)
{
struct exofs_sb_info *sbi;
struct exofs_fscb *fscb;
diff --git a/fs/exofs/symlink.c b/fs/exofs/symlink.c
index 36e2d7b..4dd687c 100644
--- a/fs/exofs/symlink.c
+++ b/fs/exofs/symlink.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com) (avishay@il.ibm.com)
- * Copyright (C) 2005, 2006
- * International Business Machines
+ * Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
* Boaz Harrosh <bharrosh@panasas.com>
*
diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c
index 7cb4bad..e743130 100644
--- a/fs/ext2/ioctl.c
+++ b/fs/ext2/ioctl.c
@@ -13,7 +13,6 @@
#include <linux/sched.h>
#include <linux/compat.h>
#include <linux/mount.h>
-#include <linux/smp_lock.h>
#include <asm/current.h>
#include <asm/uaccess.h>
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 6524eca..e1dedb0 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -66,8 +66,16 @@
inode = NULL;
if (ino) {
inode = ext2_iget(dir->i_sb, ino);
- if (IS_ERR(inode))
- return ERR_CAST(inode);
+ if (unlikely(IS_ERR(inode))) {
+ if (PTR_ERR(inode) == -ESTALE) {
+ ext2_error(dir->i_sb, __func__,
+ "deleted inode referenced: %lu",
+ ino);
+ return ERR_PTR(-EIO);
+ } else {
+ return ERR_CAST(inode);
+ }
+ }
}
return d_splice_alias(inode, dentry);
}
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 3d724a9..373fa90 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -130,8 +130,7 @@
struct buffer_head *bh = NULL;
map_bh.b_state = 0;
- err = ext3_get_blocks_handle(NULL, inode, blk, 1,
- &map_bh, 0, 0);
+ err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0);
if (err > 0) {
pgoff_t index = map_bh.b_blocknr >>
(PAGE_CACHE_SHIFT - inode->i_blkbits);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 5f51fed..b49908a 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -788,7 +788,7 @@
int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
sector_t iblock, unsigned long maxblocks,
struct buffer_head *bh_result,
- int create, int extend_disksize)
+ int create)
{
int err = -EIO;
int offsets[4];
@@ -911,13 +911,6 @@
if (!err)
err = ext3_splice_branch(handle, inode, iblock,
partial, indirect_blks, count);
- /*
- * i_disksize growing is protected by truncate_mutex. Don't forget to
- * protect it if you're about to implement concurrent
- * ext3_get_block() -bzzz
- */
- if (!err && extend_disksize && inode->i_size > ei->i_disksize)
- ei->i_disksize = inode->i_size;
mutex_unlock(&ei->truncate_mutex);
if (err)
goto cleanup;
@@ -972,7 +965,7 @@
}
ret = ext3_get_blocks_handle(handle, inode, iblock,
- max_blocks, bh_result, create, 0);
+ max_blocks, bh_result, create);
if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
ret = 0;
@@ -1005,7 +998,7 @@
dummy.b_blocknr = -1000;
buffer_trace_init(&dummy.b_history);
err = ext3_get_blocks_handle(handle, inode, block, 1,
- &dummy, create, 1);
+ &dummy, create);
/*
* ext3_get_blocks_handle() returns number of blocks
* mapped. 0 in case of a HOLE.
@@ -1193,15 +1186,16 @@
* i_size_read because we hold i_mutex.
*
* Add inode to orphan list in case we crash before truncate
- * finishes.
+ * finishes. Do this only if ext3_can_truncate() agrees so
+ * that orphan processing code is happy.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
ext3_journal_stop(handle);
unlock_page(page);
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
}
if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
goto retry;
@@ -1287,7 +1281,7 @@
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
ret2 = ext3_journal_stop(handle);
if (!ret)
@@ -1296,7 +1290,7 @@
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
return ret ? ret : copied;
}
@@ -1315,14 +1309,14 @@
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
ret = ext3_journal_stop(handle);
unlock_page(page);
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
return ret ? ret : copied;
}
@@ -1358,7 +1352,7 @@
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext3_can_truncate(inode))
ext3_orphan_add(handle, inode);
EXT3_I(inode)->i_state |= EXT3_STATE_JDATA;
if (inode->i_size > EXT3_I(inode)->i_disksize) {
@@ -1375,7 +1369,7 @@
page_cache_release(page);
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext3_truncate(inode);
return ret ? ret : copied;
}
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 0ddf7e5..9714db3 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -93,20 +93,20 @@
struct ext4_allocation_request {
/* target inode for block we're allocating */
struct inode *inode;
- /* logical block in target inode */
- ext4_lblk_t logical;
- /* phys. target (a hint) */
- ext4_fsblk_t goal;
- /* the closest logical allocated block to the left */
- ext4_lblk_t lleft;
- /* phys. block for ^^^ */
- ext4_fsblk_t pleft;
- /* the closest logical allocated block to the right */
- ext4_lblk_t lright;
- /* phys. block for ^^^ */
- ext4_fsblk_t pright;
/* how many blocks we want to allocate */
unsigned int len;
+ /* logical block in target inode */
+ ext4_lblk_t logical;
+ /* the closest logical allocated block to the left */
+ ext4_lblk_t lleft;
+ /* the closest logical allocated block to the right */
+ ext4_lblk_t lright;
+ /* phys. target (a hint) */
+ ext4_fsblk_t goal;
+ /* phys. block for the closest logical allocated block to the left */
+ ext4_fsblk_t pleft;
+ /* phys. block for the closest logical allocated block to the right */
+ ext4_fsblk_t pright;
/* flags. see above EXT4_MB_HINT_* */
unsigned int flags;
};
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index ad13a84..eb27fd0 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -43,6 +43,8 @@
ext4_journal_abort_handle(where, __func__, bh,
handle, err);
}
+ else
+ brelse(bh);
return err;
}
@@ -57,6 +59,8 @@
ext4_journal_abort_handle(where, __func__, bh,
handle, err);
}
+ else
+ brelse(bh);
return err;
}
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index be2f426..139fb8c 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -131,9 +131,11 @@
int __ext4_journal_get_write_access(const char *where, handle_t *handle,
struct buffer_head *bh);
+/* When called with an invalid handle, this will still do a put on the BH */
int __ext4_journal_forget(const char *where, handle_t *handle,
struct buffer_head *bh);
+/* When called with an invalid handle, this will still do a put on the BH */
int __ext4_journal_revoke(const char *where, handle_t *handle,
ext4_fsblk_t blocknr, struct buffer_head *bh);
@@ -281,10 +283,10 @@
static inline int ext4_should_writeback_data(struct inode *inode)
{
- if (EXT4_JOURNAL(inode) == NULL)
- return 0;
if (!S_ISREG(inode->i_mode))
return 0;
+ if (EXT4_JOURNAL(inode) == NULL)
+ return 1;
if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
return 0;
if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 50322a0..73ebfb4 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1977,6 +1977,7 @@
*/
/* 1 bitmap, 1 block group descriptor */
ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+ return ret;
}
}
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 2f64573..29e6dc7 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -833,7 +833,7 @@
if (!goal)
goal = sbi->s_inode_goal;
- if (goal && goal < le32_to_cpu(sbi->s_es->s_inodes_count)) {
+ if (goal && goal <= le32_to_cpu(sbi->s_es->s_inodes_count)) {
group = (goal - 1) / EXT4_INODES_PER_GROUP(sb);
ino = (goal - 1) % EXT4_INODES_PER_GROUP(sb);
ret2 = 0;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 60a26f3..f9c642b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -78,16 +78,14 @@
* but there may still be a record of it in the journal, and that record
* still needs to be revoked.
*
- * If the handle isn't valid we're not journaling so there's nothing to do.
+ * If the handle isn't valid we're not journaling, but we still need to
+ * call into ext4_journal_revoke() to put the buffer head.
*/
int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
struct buffer_head *bh, ext4_fsblk_t blocknr)
{
int err;
- if (!ext4_handle_valid(handle))
- return 0;
-
might_sleep();
BUFFER_TRACE(bh, "enter");
@@ -1513,14 +1511,14 @@
* Add inode to orphan list in case we crash before
* truncate finishes
*/
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
ext4_orphan_add(handle, inode);
ext4_journal_stop(handle);
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might
+ * If truncate failed early the inode might
* still be on the orphan list; we need to
* make sure the inode is removed from the
* orphan list in that case.
@@ -1614,7 +1612,7 @@
ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
copied = ret2;
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
@@ -1628,9 +1626,9 @@
ret = ret2;
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might still be
+ * If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
@@ -1655,7 +1653,7 @@
ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
copied = ret2;
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
@@ -1670,9 +1668,9 @@
ret = ret2;
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might still be
+ * If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
@@ -1722,7 +1720,7 @@
unlock_page(page);
page_cache_release(page);
- if (pos + len > inode->i_size)
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
@@ -1733,9 +1731,9 @@
if (!ret)
ret = ret2;
if (pos + len > inode->i_size) {
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
/*
- * If vmtruncate failed early the inode might still be
+ * If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
* is removed from the orphan list in that case.
*/
@@ -2305,15 +2303,9 @@
return;
}
-static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh)
+static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh)
{
- /*
- * unmapped buffer is possible for holes.
- * delay buffer is possible with delayed allocation.
- * We also need to consider unwritten buffer as unmapped.
- */
- return (!buffer_mapped(bh) || buffer_delay(bh) ||
- buffer_unwritten(bh)) && buffer_dirty(bh);
+ return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh);
}
/*
@@ -2398,9 +2390,9 @@
* We need to try to allocate
* unmapped blocks in the same page.
* Otherwise we won't make progress
- * with the page in ext4_da_writepage
+ * with the page in ext4_writepage
*/
- if (ext4_bh_unmapped_or_delay(NULL, bh)) {
+ if (ext4_bh_delay_or_unwritten(NULL, bh)) {
mpage_add_bh_to_extent(mpd, logical,
bh->b_size,
bh->b_state);
@@ -2517,7 +2509,6 @@
* so call get_block_wrap with create = 0
*/
ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0);
- BUG_ON(create && ret == 0);
if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
ret = 0;
@@ -2525,15 +2516,102 @@
return ret;
}
+static int bget_one(handle_t *handle, struct buffer_head *bh)
+{
+ get_bh(bh);
+ return 0;
+}
+
+static int bput_one(handle_t *handle, struct buffer_head *bh)
+{
+ put_bh(bh);
+ return 0;
+}
+
+static int __ext4_journalled_writepage(struct page *page,
+ struct writeback_control *wbc,
+ unsigned int len)
+{
+ struct address_space *mapping = page->mapping;
+ struct inode *inode = mapping->host;
+ struct buffer_head *page_bufs;
+ handle_t *handle = NULL;
+ int ret = 0;
+ int err;
+
+ page_bufs = page_buffers(page);
+ BUG_ON(!page_bufs);
+ walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one);
+ /* As soon as we unlock the page, it can go away, but we have
+ * references to buffers so we are safe */
+ unlock_page(page);
+
+ handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ goto out;
+ }
+
+ ret = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+ do_journal_get_write_access);
+
+ err = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+ write_end_fn);
+ if (ret == 0)
+ ret = err;
+ err = ext4_journal_stop(handle);
+ if (!ret)
+ ret = err;
+
+ walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one);
+ EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
+out:
+ return ret;
+}
+
/*
+ * Note that we don't need to start a transaction unless we're journaling data
+ * because we should have holes filled from ext4_page_mkwrite(). We even don't
+ * need to file the inode to the transaction's list in ordered mode because if
+ * we are writing back data added by write(), the inode is already there and if
+ * we are writing back data modified via mmap(), noone guarantees in which
+ * transaction the data will hit the disk. In case we are journaling data, we
+ * cannot start transaction directly because transaction start ranks above page
+ * lock so we have to do some magic.
+ *
* This function can get called via...
* - ext4_da_writepages after taking page lock (have journal handle)
* - journal_submit_inode_data_buffers (no journal handle)
* - shrink_page_list via pdflush (no journal handle)
* - grab_page_cache when doing write_begin (have journal handle)
+ *
+ * We don't do any block allocation in this function. If we have page with
+ * multiple blocks we need to write those buffer_heads that are mapped. This
+ * is important for mmaped based write. So if we do with blocksize 1K
+ * truncate(f, 1024);
+ * a = mmap(f, 0, 4096);
+ * a[0] = 'a';
+ * truncate(f, 4096);
+ * we have in the page first buffer_head mapped via page_mkwrite call back
+ * but other bufer_heads would be unmapped but dirty(dirty done via the
+ * do_wp_page). So writepage should write the first block. If we modify
+ * the mmap area beyond 1024 we will again get a page_fault and the
+ * page_mkwrite callback will do the block allocation and mark the
+ * buffer_heads mapped.
+ *
+ * We redirty the page if we have any buffer_heads that is either delay or
+ * unwritten in the page.
+ *
+ * We can get recursively called as show below.
+ *
+ * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
+ * ext4_writepage()
+ *
+ * But since we don't do any block allocation we should not deadlock.
+ * Page also have the dirty flag cleared so we don't get recurive page_lock.
*/
-static int ext4_da_writepage(struct page *page,
- struct writeback_control *wbc)
+static int ext4_writepage(struct page *page,
+ struct writeback_control *wbc)
{
int ret = 0;
loff_t size;
@@ -2541,7 +2619,7 @@
struct buffer_head *page_bufs;
struct inode *inode = page->mapping->host;
- trace_ext4_da_writepage(inode, page);
+ trace_ext4_writepage(inode, page);
size = i_size_read(inode);
if (page->index == size >> PAGE_CACHE_SHIFT)
len = size & ~PAGE_CACHE_MASK;
@@ -2551,7 +2629,7 @@
if (page_has_buffers(page)) {
page_bufs = page_buffers(page);
if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
- ext4_bh_unmapped_or_delay)) {
+ ext4_bh_delay_or_unwritten)) {
/*
* We don't want to do block allocation
* So redirty the page and return
@@ -2578,13 +2656,13 @@
* all are mapped and non delay. We don't want to
* do block allocation here.
*/
- ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
+ ret = block_prepare_write(page, 0, len,
noalloc_get_block_write);
if (!ret) {
page_bufs = page_buffers(page);
/* check whether all are mapped and non delay */
if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
- ext4_bh_unmapped_or_delay)) {
+ ext4_bh_delay_or_unwritten)) {
redirty_page_for_writepage(wbc, page);
unlock_page(page);
return 0;
@@ -2600,7 +2678,16 @@
return 0;
}
/* now mark the buffer_heads as dirty and uptodate */
- block_commit_write(page, 0, PAGE_CACHE_SIZE);
+ block_commit_write(page, 0, len);
+ }
+
+ if (PageChecked(page) && ext4_should_journal_data(inode)) {
+ /*
+ * It's mmapped pagecache. Add buffers and journal it. There
+ * doesn't seem much point in redirtying the page here.
+ */
+ ClearPageChecked(page);
+ return __ext4_journalled_writepage(page, wbc, len);
}
if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
@@ -2907,7 +2994,7 @@
* i_size_read because we hold i_mutex.
*/
if (pos + len > inode->i_size)
- vmtruncate(inode, inode->i_size);
+ ext4_truncate(inode);
}
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -3130,222 +3217,6 @@
return generic_block_bmap(mapping, block, ext4_get_block);
}
-static int bget_one(handle_t *handle, struct buffer_head *bh)
-{
- get_bh(bh);
- return 0;
-}
-
-static int bput_one(handle_t *handle, struct buffer_head *bh)
-{
- put_bh(bh);
- return 0;
-}
-
-/*
- * Note that we don't need to start a transaction unless we're journaling data
- * because we should have holes filled from ext4_page_mkwrite(). We even don't
- * need to file the inode to the transaction's list in ordered mode because if
- * we are writing back data added by write(), the inode is already there and if
- * we are writing back data modified via mmap(), noone guarantees in which
- * transaction the data will hit the disk. In case we are journaling data, we
- * cannot start transaction directly because transaction start ranks above page
- * lock so we have to do some magic.
- *
- * In all journaling modes block_write_full_page() will start the I/O.
- *
- * Problem:
- *
- * ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
- * ext4_writepage()
- *
- * Similar for:
- *
- * ext4_file_write() -> generic_file_write() -> __alloc_pages() -> ...
- *
- * Same applies to ext4_get_block(). We will deadlock on various things like
- * lock_journal and i_data_sem
- *
- * Setting PF_MEMALLOC here doesn't work - too many internal memory
- * allocations fail.
- *
- * 16May01: If we're reentered then journal_current_handle() will be
- * non-zero. We simply *return*.
- *
- * 1 July 2001: @@@ FIXME:
- * In journalled data mode, a data buffer may be metadata against the
- * current transaction. But the same file is part of a shared mapping
- * and someone does a writepage() on it.
- *
- * We will move the buffer onto the async_data list, but *after* it has
- * been dirtied. So there's a small window where we have dirty data on
- * BJ_Metadata.
- *
- * Note that this only applies to the last partial page in the file. The
- * bit which block_write_full_page() uses prepare/commit for. (That's
- * broken code anyway: it's wrong for msync()).
- *
- * It's a rare case: affects the final partial page, for journalled data
- * where the file is subject to bith write() and writepage() in the same
- * transction. To fix it we'll need a custom block_write_full_page().
- * We'll probably need that anyway for journalling writepage() output.
- *
- * We don't honour synchronous mounts for writepage(). That would be
- * disastrous. Any write() or metadata operation will sync the fs for
- * us.
- *
- */
-static int __ext4_normal_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct inode *inode = page->mapping->host;
-
- if (test_opt(inode->i_sb, NOBH))
- return nobh_writepage(page, noalloc_get_block_write, wbc);
- else
- return block_write_full_page(page, noalloc_get_block_write,
- wbc);
-}
-
-static int ext4_normal_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct inode *inode = page->mapping->host;
- loff_t size = i_size_read(inode);
- loff_t len;
-
- trace_ext4_normal_writepage(inode, page);
- J_ASSERT(PageLocked(page));
- if (page->index == size >> PAGE_CACHE_SHIFT)
- len = size & ~PAGE_CACHE_MASK;
- else
- len = PAGE_CACHE_SIZE;
-
- if (page_has_buffers(page)) {
- /* if page has buffers it should all be mapped
- * and allocated. If there are not buffers attached
- * to the page we know the page is dirty but it lost
- * buffers. That means that at some moment in time
- * after write_begin() / write_end() has been called
- * all buffers have been clean and thus they must have been
- * written at least once. So they are all mapped and we can
- * happily proceed with mapping them and writing the page.
- */
- BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
- ext4_bh_unmapped_or_delay));
- }
-
- if (!ext4_journal_current_handle())
- return __ext4_normal_writepage(page, wbc);
-
- redirty_page_for_writepage(wbc, page);
- unlock_page(page);
- return 0;
-}
-
-static int __ext4_journalled_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct address_space *mapping = page->mapping;
- struct inode *inode = mapping->host;
- struct buffer_head *page_bufs;
- handle_t *handle = NULL;
- int ret = 0;
- int err;
-
- ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
- noalloc_get_block_write);
- if (ret != 0)
- goto out_unlock;
-
- page_bufs = page_buffers(page);
- walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, NULL,
- bget_one);
- /* As soon as we unlock the page, it can go away, but we have
- * references to buffers so we are safe */
- unlock_page(page);
-
- handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
- if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- goto out;
- }
-
- ret = walk_page_buffers(handle, page_bufs, 0,
- PAGE_CACHE_SIZE, NULL, do_journal_get_write_access);
-
- err = walk_page_buffers(handle, page_bufs, 0,
- PAGE_CACHE_SIZE, NULL, write_end_fn);
- if (ret == 0)
- ret = err;
- err = ext4_journal_stop(handle);
- if (!ret)
- ret = err;
-
- walk_page_buffers(handle, page_bufs, 0,
- PAGE_CACHE_SIZE, NULL, bput_one);
- EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
- goto out;
-
-out_unlock:
- unlock_page(page);
-out:
- return ret;
-}
-
-static int ext4_journalled_writepage(struct page *page,
- struct writeback_control *wbc)
-{
- struct inode *inode = page->mapping->host;
- loff_t size = i_size_read(inode);
- loff_t len;
-
- trace_ext4_journalled_writepage(inode, page);
- J_ASSERT(PageLocked(page));
- if (page->index == size >> PAGE_CACHE_SHIFT)
- len = size & ~PAGE_CACHE_MASK;
- else
- len = PAGE_CACHE_SIZE;
-
- if (page_has_buffers(page)) {
- /* if page has buffers it should all be mapped
- * and allocated. If there are not buffers attached
- * to the page we know the page is dirty but it lost
- * buffers. That means that at some moment in time
- * after write_begin() / write_end() has been called
- * all buffers have been clean and thus they must have been
- * written at least once. So they are all mapped and we can
- * happily proceed with mapping them and writing the page.
- */
- BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
- ext4_bh_unmapped_or_delay));
- }
-
- if (ext4_journal_current_handle())
- goto no_write;
-
- if (PageChecked(page)) {
- /*
- * It's mmapped pagecache. Add buffers and journal it. There
- * doesn't seem much point in redirtying the page here.
- */
- ClearPageChecked(page);
- return __ext4_journalled_writepage(page, wbc);
- } else {
- /*
- * It may be a page full of checkpoint-mode buffers. We don't
- * really know unless we go poke around in the buffer_heads.
- * But block_write_full_page will do the right thing.
- */
- return block_write_full_page(page, noalloc_get_block_write,
- wbc);
- }
-no_write:
- redirty_page_for_writepage(wbc, page);
- unlock_page(page);
- return 0;
-}
-
static int ext4_readpage(struct file *file, struct page *page)
{
return mpage_readpage(page, ext4_get_block);
@@ -3492,7 +3363,7 @@
static const struct address_space_operations ext4_ordered_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_normal_writepage,
+ .writepage = ext4_writepage,
.sync_page = block_sync_page,
.write_begin = ext4_write_begin,
.write_end = ext4_ordered_write_end,
@@ -3507,7 +3378,7 @@
static const struct address_space_operations ext4_writeback_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_normal_writepage,
+ .writepage = ext4_writepage,
.sync_page = block_sync_page,
.write_begin = ext4_write_begin,
.write_end = ext4_writeback_write_end,
@@ -3522,7 +3393,7 @@
static const struct address_space_operations ext4_journalled_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_journalled_writepage,
+ .writepage = ext4_writepage,
.sync_page = block_sync_page,
.write_begin = ext4_write_begin,
.write_end = ext4_journalled_write_end,
@@ -3536,7 +3407,7 @@
static const struct address_space_operations ext4_da_aops = {
.readpage = ext4_readpage,
.readpages = ext4_readpages,
- .writepage = ext4_da_writepage,
+ .writepage = ext4_writepage,
.writepages = ext4_da_writepages,
.sync_page = block_sync_page,
.write_begin = ext4_da_write_begin,
@@ -3583,7 +3454,8 @@
struct page *page;
int err = 0;
- page = grab_cache_page(mapping, from >> PAGE_CACHE_SHIFT);
+ page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
+ mapping_gfp_mask(mapping) & ~__GFP_FS);
if (!page)
return -EINVAL;
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index bb415408..7050a9c 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -12,7 +12,6 @@
#include <linux/capability.h>
#include <linux/time.h>
#include <linux/compat.h>
-#include <linux/smp_lock.h>
#include <linux/mount.h>
#include <linux/file.h>
#include <asm/uaccess.h>
@@ -192,7 +191,7 @@
case EXT4_IOC_GROUP_EXTEND: {
ext4_fsblk_t n_blocks_count;
struct super_block *sb = inode->i_sb;
- int err, err2;
+ int err, err2=0;
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
@@ -205,9 +204,11 @@
return err;
err = ext4_group_extend(sb, EXT4_SB(sb)->s_es, n_blocks_count);
- jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
- err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
- jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ if (EXT4_SB(sb)->s_journal) {
+ jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+ err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+ jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ }
if (err == 0)
err = err2;
mnt_drop_write(filp->f_path.mnt);
@@ -252,7 +253,7 @@
case EXT4_IOC_GROUP_ADD: {
struct ext4_new_group_data input;
struct super_block *sb = inode->i_sb;
- int err, err2;
+ int err, err2=0;
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
@@ -266,9 +267,11 @@
return err;
err = ext4_group_add(sb, &input);
- jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
- err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
- jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ if (EXT4_SB(sb)->s_journal) {
+ jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+ err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+ jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ }
if (err == 0)
err = err2;
mnt_drop_write(filp->f_path.mnt);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 519a0a6..cd25846 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -657,7 +657,8 @@
}
}
-static void ext4_mb_generate_buddy(struct super_block *sb,
+static noinline_for_stack
+void ext4_mb_generate_buddy(struct super_block *sb,
void *buddy, void *bitmap, ext4_group_t group)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -1480,7 +1481,8 @@
ext4_mb_check_limits(ac, e4b, 0);
}
-static int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct ext4_free_extent ex = ac->ac_b_ex;
@@ -1507,7 +1509,8 @@
return 0;
}
-static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
ext4_group_t group = ac->ac_g_ex.fe_group;
@@ -1566,7 +1569,8 @@
* The routine scans buddy structures (not bitmap!) from given order
* to max order and tries to find big enough chunk to satisfy the req
*/
-static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct super_block *sb = ac->ac_sb;
@@ -1609,7 +1613,8 @@
* In order to optimize scanning, caller must pass number of
* free blocks in the group, so the routine can know upper limit.
*/
-static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct super_block *sb = ac->ac_sb;
@@ -1668,7 +1673,8 @@
* we try to find stripe-aligned chunks for stripe-size requests
* XXX should do so at least for multiples of stripe size as well
*/
-static void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
struct ext4_buddy *e4b)
{
struct super_block *sb = ac->ac_sb;
@@ -1831,7 +1837,8 @@
}
-static int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
+static noinline_for_stack
+int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
{
int ret;
@@ -2902,7 +2909,11 @@
void exit_ext4_mballoc(void)
{
- /* XXX: synchronize_rcu(); */
+ /*
+ * Wait for completion of call_rcu()'s on ext4_pspace_cachep
+ * before destroying the slab cache.
+ */
+ rcu_barrier();
kmem_cache_destroy(ext4_pspace_cachep);
kmem_cache_destroy(ext4_ac_cachep);
kmem_cache_destroy(ext4_free_ext_cachep);
@@ -3457,7 +3468,8 @@
* used in in-core bitmap. buddy must be generated from this bitmap
* Need to be called with ext4 group lock held
*/
-static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
+static noinline_for_stack
+void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
ext4_group_t group)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -4215,14 +4227,9 @@
ext4_get_group_no_and_offset(sb, goal, &group, &block);
/* set up allocation goals */
+ memset(ac, 0, sizeof(struct ext4_allocation_context));
ac->ac_b_ex.fe_logical = ar->logical;
- ac->ac_b_ex.fe_group = 0;
- ac->ac_b_ex.fe_start = 0;
- ac->ac_b_ex.fe_len = 0;
ac->ac_status = AC_STATUS_CONTINUE;
- ac->ac_groups_scanned = 0;
- ac->ac_ex_scanned = 0;
- ac->ac_found = 0;
ac->ac_sb = sb;
ac->ac_inode = ar->inode;
ac->ac_o_ex.fe_logical = ar->logical;
@@ -4233,15 +4240,7 @@
ac->ac_g_ex.fe_group = group;
ac->ac_g_ex.fe_start = block;
ac->ac_g_ex.fe_len = len;
- ac->ac_f_ex.fe_len = 0;
ac->ac_flags = ar->flags;
- ac->ac_2order = 0;
- ac->ac_criteria = 0;
- ac->ac_pa = NULL;
- ac->ac_bitmap_page = NULL;
- ac->ac_buddy_page = NULL;
- ac->alloc_semp = NULL;
- ac->ac_lg = NULL;
/* we have to define context: we'll we work with a file or
* locality group. this is a policy, actually */
@@ -4509,10 +4508,7 @@
}
ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
- if (ac) {
- ac->ac_sb = sb;
- ac->ac_inode = ar->inode;
- } else {
+ if (!ac) {
ar->len = 0;
*errp = -ENOMEM;
goto out1;
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 38ff75a..530b4ca 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -16,7 +16,6 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/time.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/compat.h>
#include <asm/uaccess.h>
diff --git a/fs/fat/file.c b/fs/fat/file.c
index b28ea64..f042b96 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -134,7 +134,7 @@
if ((filp->f_mode & FMODE_WRITE) &&
MSDOS_SB(inode->i_sb)->options.flush) {
fat_flush_inodes(inode->i_sb, inode, NULL);
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
return 0;
}
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 82f88733..bbc94ae 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/time.h>
#include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
#include "fat.h"
/* Characters that are undesirable in an MS-DOS file name */
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 73471b7..cb6e835 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -19,7 +19,6 @@
#include <linux/jiffies.h>
#include <linux/ctype.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/namei.h>
#include "fat.h"
diff --git a/fs/fcntl.c b/fs/fcntl.c
index a040b76..ae41308 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,7 +19,6 @@
#include <linux/signal.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
-#include <linux/smp_lock.h>
#include <asm/poll.h>
#include <asm/siginfo.h>
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index cdbd165..1e8af93 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -38,6 +38,7 @@
#include <linux/buffer_head.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/stat.h>
#include <linux/vfs.h>
#include <linux/mount.h>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 8fed2ed..6484eb7 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -286,8 +286,8 @@
}
if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
fc->connected && fc->bdi_initialized) {
- clear_bdi_congested(&fc->bdi, READ);
- clear_bdi_congested(&fc->bdi, WRITE);
+ clear_bdi_congested(&fc->bdi, BLK_RW_SYNC);
+ clear_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
}
fc->num_background--;
fc->active_background--;
@@ -414,8 +414,8 @@
fc->blocked = 1;
if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
fc->bdi_initialized) {
- set_bdi_congested(&fc->bdi, READ);
- set_bdi_congested(&fc->bdi, WRITE);
+ set_bdi_congested(&fc->bdi, BLK_RW_SYNC);
+ set_bdi_congested(&fc->bdi, BLK_RW_ASYNC);
}
list_add_tail(&req->list, &fc->bg_queue);
flush_bg_queue(fc);
@@ -849,6 +849,81 @@
return err;
}
+static int fuse_notify_inval_inode(struct fuse_conn *fc, unsigned int size,
+ struct fuse_copy_state *cs)
+{
+ struct fuse_notify_inval_inode_out outarg;
+ int err = -EINVAL;
+
+ if (size != sizeof(outarg))
+ goto err;
+
+ err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+ if (err)
+ goto err;
+ fuse_copy_finish(cs);
+
+ down_read(&fc->killsb);
+ err = -ENOENT;
+ if (!fc->sb)
+ goto err_unlock;
+
+ err = fuse_reverse_inval_inode(fc->sb, outarg.ino,
+ outarg.off, outarg.len);
+
+err_unlock:
+ up_read(&fc->killsb);
+ return err;
+
+err:
+ fuse_copy_finish(cs);
+ return err;
+}
+
+static int fuse_notify_inval_entry(struct fuse_conn *fc, unsigned int size,
+ struct fuse_copy_state *cs)
+{
+ struct fuse_notify_inval_entry_out outarg;
+ int err = -EINVAL;
+ char buf[FUSE_NAME_MAX+1];
+ struct qstr name;
+
+ if (size < sizeof(outarg))
+ goto err;
+
+ err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+ if (err)
+ goto err;
+
+ err = -ENAMETOOLONG;
+ if (outarg.namelen > FUSE_NAME_MAX)
+ goto err;
+
+ name.name = buf;
+ name.len = outarg.namelen;
+ err = fuse_copy_one(cs, buf, outarg.namelen + 1);
+ if (err)
+ goto err;
+ fuse_copy_finish(cs);
+ buf[outarg.namelen] = 0;
+ name.hash = full_name_hash(name.name, name.len);
+
+ down_read(&fc->killsb);
+ err = -ENOENT;
+ if (!fc->sb)
+ goto err_unlock;
+
+ err = fuse_reverse_inval_entry(fc->sb, outarg.parent, &name);
+
+err_unlock:
+ up_read(&fc->killsb);
+ return err;
+
+err:
+ fuse_copy_finish(cs);
+ return err;
+}
+
static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
unsigned int size, struct fuse_copy_state *cs)
{
@@ -856,6 +931,12 @@
case FUSE_NOTIFY_POLL:
return fuse_notify_poll(fc, size, cs);
+ case FUSE_NOTIFY_INVAL_INODE:
+ return fuse_notify_inval_inode(fc, size, cs);
+
+ case FUSE_NOTIFY_INVAL_ENTRY:
+ return fuse_notify_inval_entry(fc, size, cs);
+
default:
fuse_copy_finish(cs);
return -EINVAL;
@@ -910,7 +991,7 @@
unsigned long nr_segs, loff_t pos)
{
int err;
- unsigned nbytes = iov_length(iov, nr_segs);
+ size_t nbytes = iov_length(iov, nr_segs);
struct fuse_req *req;
struct fuse_out_header oh;
struct fuse_copy_state cs;
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index b3089a0..e703654 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -375,7 +375,7 @@
struct fuse_conn *fc = get_fuse_conn(dir);
struct fuse_req *req;
struct fuse_req *forget_req;
- struct fuse_open_in inarg;
+ struct fuse_create_in inarg;
struct fuse_open_out outopen;
struct fuse_entry_out outentry;
struct fuse_file *ff;
@@ -399,15 +399,20 @@
if (!ff)
goto out_put_request;
+ if (!fc->dont_mask)
+ mode &= ~current_umask();
+
flags &= ~O_NOCTTY;
memset(&inarg, 0, sizeof(inarg));
memset(&outentry, 0, sizeof(outentry));
inarg.flags = flags;
inarg.mode = mode;
+ inarg.umask = current_umask();
req->in.h.opcode = FUSE_CREATE;
req->in.h.nodeid = get_node_id(dir);
req->in.numargs = 2;
- req->in.args[0].size = sizeof(inarg);
+ req->in.args[0].size = fc->minor < 12 ? sizeof(struct fuse_open_in) :
+ sizeof(inarg);
req->in.args[0].value = &inarg;
req->in.args[1].size = entry->d_name.len + 1;
req->in.args[1].value = entry->d_name.name;
@@ -546,12 +551,17 @@
if (IS_ERR(req))
return PTR_ERR(req);
+ if (!fc->dont_mask)
+ mode &= ~current_umask();
+
memset(&inarg, 0, sizeof(inarg));
inarg.mode = mode;
inarg.rdev = new_encode_dev(rdev);
+ inarg.umask = current_umask();
req->in.h.opcode = FUSE_MKNOD;
req->in.numargs = 2;
- req->in.args[0].size = sizeof(inarg);
+ req->in.args[0].size = fc->minor < 12 ? FUSE_COMPAT_MKNOD_IN_SIZE :
+ sizeof(inarg);
req->in.args[0].value = &inarg;
req->in.args[1].size = entry->d_name.len + 1;
req->in.args[1].value = entry->d_name.name;
@@ -578,8 +588,12 @@
if (IS_ERR(req))
return PTR_ERR(req);
+ if (!fc->dont_mask)
+ mode &= ~current_umask();
+
memset(&inarg, 0, sizeof(inarg));
inarg.mode = mode;
+ inarg.umask = current_umask();
req->in.h.opcode = FUSE_MKDIR;
req->in.numargs = 2;
req->in.args[0].size = sizeof(inarg);
@@ -845,6 +859,43 @@
return err;
}
+int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid,
+ struct qstr *name)
+{
+ int err = -ENOTDIR;
+ struct inode *parent;
+ struct dentry *dir;
+ struct dentry *entry;
+
+ parent = ilookup5(sb, parent_nodeid, fuse_inode_eq, &parent_nodeid);
+ if (!parent)
+ return -ENOENT;
+
+ mutex_lock(&parent->i_mutex);
+ if (!S_ISDIR(parent->i_mode))
+ goto unlock;
+
+ err = -ENOENT;
+ dir = d_find_alias(parent);
+ if (!dir)
+ goto unlock;
+
+ entry = d_lookup(dir, name);
+ dput(dir);
+ if (!entry)
+ goto unlock;
+
+ fuse_invalidate_attr(parent);
+ fuse_invalidate_entry(entry);
+ dput(entry);
+ err = 0;
+
+ unlock:
+ mutex_unlock(&parent->i_mutex);
+ iput(parent);
+ return err;
+}
+
/*
* Calling into a user-controlled filesystem gives the filesystem
* daemon ptrace-like capabilities over the requester process. This
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index fce6ce6..cbc4640 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1922,7 +1922,7 @@
req = fuse_get_req(fc);
if (IS_ERR(req))
- return PTR_ERR(req);
+ return POLLERR;
req->in.h.opcode = FUSE_POLL;
req->in.h.nodeid = ff->nodeid;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index aaf2f9f..52b641f 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -446,6 +446,9 @@
/** Do multi-page cached writes */
unsigned big_writes:1;
+ /** Don't apply umask to creation modes */
+ unsigned dont_mask:1;
+
/** The number of requests waiting for completion */
atomic_t num_waiting;
@@ -481,6 +484,12 @@
/** Called on final put */
void (*release)(struct fuse_conn *);
+
+ /** Super block for this connection. */
+ struct super_block *sb;
+
+ /** Read/write semaphore to hold when accessing sb. */
+ struct rw_semaphore killsb;
};
static inline struct fuse_conn *get_fuse_conn_super(struct super_block *sb)
@@ -509,6 +518,11 @@
extern const struct dentry_operations fuse_dentry_operations;
/**
+ * Inode to nodeid comparison.
+ */
+int fuse_inode_eq(struct inode *inode, void *_nodeidp);
+
+/**
* Get a filled in inode
*/
struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
@@ -708,6 +722,19 @@
u64 fuse_get_attr_version(struct fuse_conn *fc);
+/**
+ * File-system tells the kernel to invalidate cache for the given node id.
+ */
+int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid,
+ loff_t offset, loff_t len);
+
+/**
+ * File-system tells the kernel to invalidate parent attributes and
+ * the dentry matching parent/name.
+ */
+int fuse_reverse_inval_entry(struct super_block *sb, u64 parent_nodeid,
+ struct qstr *name);
+
int fuse_do_open(struct fuse_conn *fc, u64 nodeid, struct file *file,
bool isdir);
ssize_t fuse_direct_io(struct file *file, const char __user *buf,
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index d8673cc..f91ccc4 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -206,7 +206,7 @@
BUG();
}
-static int fuse_inode_eq(struct inode *inode, void *_nodeidp)
+int fuse_inode_eq(struct inode *inode, void *_nodeidp)
{
u64 nodeid = *(u64 *) _nodeidp;
if (get_node_id(inode) == nodeid)
@@ -257,6 +257,31 @@
return inode;
}
+int fuse_reverse_inval_inode(struct super_block *sb, u64 nodeid,
+ loff_t offset, loff_t len)
+{
+ struct inode *inode;
+ pgoff_t pg_start;
+ pgoff_t pg_end;
+
+ inode = ilookup5(sb, nodeid, fuse_inode_eq, &nodeid);
+ if (!inode)
+ return -ENOENT;
+
+ fuse_invalidate_attr(inode);
+ if (offset >= 0) {
+ pg_start = offset >> PAGE_CACHE_SHIFT;
+ if (len <= 0)
+ pg_end = -1;
+ else
+ pg_end = (offset + len - 1) >> PAGE_CACHE_SHIFT;
+ invalidate_inode_pages2_range(inode->i_mapping,
+ pg_start, pg_end);
+ }
+ iput(inode);
+ return 0;
+}
+
static void fuse_umount_begin(struct super_block *sb)
{
fuse_abort_conn(get_fuse_conn_super(sb));
@@ -480,6 +505,7 @@
memset(fc, 0, sizeof(*fc));
spin_lock_init(&fc->lock);
mutex_init(&fc->inst_mutex);
+ init_rwsem(&fc->killsb);
atomic_set(&fc->count, 1);
init_waitqueue_head(&fc->waitq);
init_waitqueue_head(&fc->blocked_waitq);
@@ -725,6 +751,8 @@
}
if (arg->flags & FUSE_BIG_WRITES)
fc->big_writes = 1;
+ if (arg->flags & FUSE_DONT_MASK)
+ fc->dont_mask = 1;
} else {
ra_pages = fc->max_read / PAGE_CACHE_SIZE;
fc->no_lock = 1;
@@ -748,7 +776,7 @@
arg->minor = FUSE_KERNEL_MINOR_VERSION;
arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
- FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES;
+ FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
@@ -860,10 +888,16 @@
fuse_conn_init(fc);
fc->dev = sb->s_dev;
+ fc->sb = sb;
err = fuse_bdi_init(fc, sb);
if (err)
goto err_put_conn;
+ /* Handle umasking inside the fuse code */
+ if (sb->s_flags & MS_POSIXACL)
+ fc->dont_mask = 1;
+ sb->s_flags |= MS_POSIXACL;
+
fc->release = fuse_free_conn;
fc->flags = d.flags;
fc->user_id = d.user_id;
@@ -941,12 +975,25 @@
return get_sb_nodev(fs_type, flags, raw_data, fuse_fill_super, mnt);
}
+static void fuse_kill_sb_anon(struct super_block *sb)
+{
+ struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+ if (fc) {
+ down_write(&fc->killsb);
+ fc->sb = NULL;
+ up_write(&fc->killsb);
+ }
+
+ kill_anon_super(sb);
+}
+
static struct file_system_type fuse_fs_type = {
.owner = THIS_MODULE,
.name = "fuse",
.fs_flags = FS_HAS_SUBTYPE,
.get_sb = fuse_get_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = fuse_kill_sb_anon,
};
#ifdef CONFIG_BLOCK
@@ -958,11 +1005,24 @@
mnt);
}
+static void fuse_kill_sb_blk(struct super_block *sb)
+{
+ struct fuse_conn *fc = get_fuse_conn_super(sb);
+
+ if (fc) {
+ down_write(&fc->killsb);
+ fc->sb = NULL;
+ up_write(&fc->killsb);
+ }
+
+ kill_block_super(sb);
+}
+
static struct file_system_type fuseblk_fs_type = {
.owner = THIS_MODULE,
.name = "fuseblk",
.get_sb = fuse_get_sb_blk,
- .kill_sb = kill_block_super,
+ .kill_sb = fuse_kill_sb_blk,
.fs_flags = FS_REQUIRES_DEV | FS_HAS_SUBTYPE,
};
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 03ebb43..7ebae9a 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -624,6 +624,7 @@
{
struct gfs2_inode *ip = GFS2_I(mapping->host);
struct gfs2_sbd *sdp = GFS2_SB(mapping->host);
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
int alloc_required;
int error = 0;
@@ -637,6 +638,14 @@
error = gfs2_glock_nq(&ip->i_gh);
if (unlikely(error))
goto out_uninit;
+ if (&ip->i_inode == sdp->sd_rindex) {
+ error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE,
+ GL_NOCACHE, &m_ip->i_gh);
+ if (unlikely(error)) {
+ gfs2_glock_dq(&ip->i_gh);
+ goto out_uninit;
+ }
+ }
error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
if (error)
@@ -667,6 +676,8 @@
rblocks += data_blocks ? data_blocks : 1;
if (ind_blocks || data_blocks)
rblocks += RES_STATFS + RES_QUOTA;
+ if (&ip->i_inode == sdp->sd_rindex)
+ rblocks += 2 * RES_STATFS;
error = gfs2_trans_begin(sdp, rblocks,
PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize);
@@ -712,6 +723,10 @@
gfs2_alloc_put(ip);
}
out_unlock:
+ if (&ip->i_inode == sdp->sd_rindex) {
+ gfs2_glock_dq(&m_ip->i_gh);
+ gfs2_holder_uninit(&m_ip->i_gh);
+ }
gfs2_glock_dq(&ip->i_gh);
out_uninit:
gfs2_holder_uninit(&ip->i_gh);
@@ -725,14 +740,21 @@
static void adjust_fs_space(struct inode *inode)
{
struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+ struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+ struct buffer_head *m_bh, *l_bh;
u64 fs_total, new_free;
/* Total up the file system space, according to the latest rindex. */
fs_total = gfs2_ri_total(sdp);
+ if (gfs2_meta_inode_buffer(m_ip, &m_bh) != 0)
+ return;
spin_lock(&sdp->sd_statfs_spin);
+ gfs2_statfs_change_in(m_sc, m_bh->b_data +
+ sizeof(struct gfs2_dinode));
if (fs_total > (m_sc->sc_total + l_sc->sc_total))
new_free = fs_total - (m_sc->sc_total + l_sc->sc_total);
else
@@ -741,6 +763,13 @@
fs_warn(sdp, "File system extended by %llu blocks.\n",
(unsigned long long)new_free);
gfs2_statfs_change(sdp, new_free, new_free, 0);
+
+ if (gfs2_meta_inode_buffer(l_ip, &l_bh) != 0)
+ goto out;
+ update_statfs(sdp, m_bh, l_bh);
+ brelse(l_bh);
+out:
+ brelse(m_bh);
}
/**
@@ -763,6 +792,7 @@
{
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
u64 to = pos + copied;
void *kaddr;
unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
@@ -794,6 +824,10 @@
brelse(dibh);
gfs2_trans_end(sdp);
+ if (inode == sdp->sd_rindex) {
+ gfs2_glock_dq(&m_ip->i_gh);
+ gfs2_holder_uninit(&m_ip->i_gh);
+ }
gfs2_glock_dq(&ip->i_gh);
gfs2_holder_uninit(&ip->i_gh);
return copied;
@@ -823,6 +857,7 @@
struct inode *inode = page->mapping->host;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
struct buffer_head *dibh;
struct gfs2_alloc *al = ip->i_alloc;
unsigned int from = pos & (PAGE_CACHE_SIZE - 1);
@@ -865,6 +900,10 @@
gfs2_quota_unlock(ip);
gfs2_alloc_put(ip);
}
+ if (inode == sdp->sd_rindex) {
+ gfs2_glock_dq(&m_ip->i_gh);
+ gfs2_holder_uninit(&m_ip->i_gh);
+ }
gfs2_glock_dq(&ip->i_gh);
gfs2_holder_uninit(&ip->i_gh);
return ret;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 297421c..8b674b1 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -63,6 +63,7 @@
static DECLARE_RWSEM(gfs2_umount_flush_sem);
static struct dentry *gfs2_root;
static struct workqueue_struct *glock_workqueue;
+struct workqueue_struct *gfs2_delete_workqueue;
static LIST_HEAD(lru_list);
static atomic_t lru_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(lru_lock);
@@ -167,13 +168,33 @@
*
*/
-static void gfs2_glock_hold(struct gfs2_glock *gl)
+void gfs2_glock_hold(struct gfs2_glock *gl)
{
GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
atomic_inc(&gl->gl_ref);
}
/**
+ * demote_ok - Check to see if it's ok to unlock a glock
+ * @gl: the glock
+ *
+ * Returns: 1 if it's ok
+ */
+
+static int demote_ok(const struct gfs2_glock *gl)
+{
+ const struct gfs2_glock_operations *glops = gl->gl_ops;
+
+ if (gl->gl_state == LM_ST_UNLOCKED)
+ return 0;
+ if (!list_empty(&gl->gl_holders))
+ return 0;
+ if (glops->go_demote_ok)
+ return glops->go_demote_ok(gl);
+ return 1;
+}
+
+/**
* gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
* @gl: the glock
*
@@ -181,8 +202,13 @@
static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
{
+ int may_reclaim;
+ may_reclaim = (demote_ok(gl) &&
+ (atomic_read(&gl->gl_ref) == 1 ||
+ (gl->gl_name.ln_type == LM_TYPE_INODE &&
+ atomic_read(&gl->gl_ref) <= 2)));
spin_lock(&lru_lock);
- if (list_empty(&gl->gl_lru) && gl->gl_state != LM_ST_UNLOCKED) {
+ if (list_empty(&gl->gl_lru) && may_reclaim) {
list_add_tail(&gl->gl_lru, &lru_list);
atomic_inc(&lru_count);
}
@@ -190,6 +216,21 @@
}
/**
+ * gfs2_glock_put_nolock() - Decrement reference count on glock
+ * @gl: The glock to put
+ *
+ * This function should only be used if the caller has its own reference
+ * to the glock, in addition to the one it is dropping.
+ */
+
+void gfs2_glock_put_nolock(struct gfs2_glock *gl)
+{
+ if (atomic_dec_and_test(&gl->gl_ref))
+ GLOCK_BUG_ON(gl, 1);
+ gfs2_glock_schedule_for_reclaim(gl);
+}
+
+/**
* gfs2_glock_put() - Decrement reference count on glock
* @gl: The glock to put
*
@@ -214,9 +255,9 @@
rv = 1;
goto out;
}
- /* 1 for being hashed, 1 for having state != LM_ST_UNLOCKED */
- if (atomic_read(&gl->gl_ref) == 2)
- gfs2_glock_schedule_for_reclaim(gl);
+ spin_lock(&gl->gl_spin);
+ gfs2_glock_schedule_for_reclaim(gl);
+ spin_unlock(&gl->gl_spin);
write_unlock(gl_lock_addr(gl->gl_hash));
out:
return rv;
@@ -398,7 +439,7 @@
if (held2)
gfs2_glock_hold(gl);
else
- gfs2_glock_put(gl);
+ gfs2_glock_put_nolock(gl);
}
gl->gl_state = new_state;
@@ -633,12 +674,35 @@
out_sched:
gfs2_glock_hold(gl);
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
- gfs2_glock_put(gl);
+ gfs2_glock_put_nolock(gl);
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
goto out;
}
+static void delete_work_func(struct work_struct *work)
+{
+ struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
+ struct gfs2_sbd *sdp = gl->gl_sbd;
+ struct gfs2_inode *ip = NULL;
+ struct inode *inode;
+ u64 no_addr = 0;
+
+ spin_lock(&gl->gl_spin);
+ ip = (struct gfs2_inode *)gl->gl_object;
+ if (ip)
+ no_addr = ip->i_no_addr;
+ spin_unlock(&gl->gl_spin);
+ if (ip) {
+ inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+ if (inode) {
+ d_prune_aliases(inode);
+ iput(inode);
+ }
+ }
+ gfs2_glock_put(gl);
+}
+
static void glock_work_func(struct work_struct *work)
{
unsigned long delay = 0;
@@ -717,6 +781,7 @@
gl->gl_sbd = sdp;
gl->gl_aspace = NULL;
INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
+ INIT_WORK(&gl->gl_delete, delete_work_func);
/* If this glock protects actual on-disk data or metadata blocks,
create a VFS inode to manage the pages/buffers holding them. */
@@ -858,6 +923,8 @@
gl->gl_demote_state != state) {
gl->gl_demote_state = LM_ST_UNLOCKED;
}
+ if (gl->gl_ops->go_callback)
+ gl->gl_ops->go_callback(gl);
trace_gfs2_demote_rq(gl);
}
@@ -1274,33 +1341,12 @@
gfs2_glock_put(gl);
}
-/**
- * demote_ok - Check to see if it's ok to unlock a glock
- * @gl: the glock
- *
- * Returns: 1 if it's ok
- */
-
-static int demote_ok(const struct gfs2_glock *gl)
-{
- const struct gfs2_glock_operations *glops = gl->gl_ops;
-
- if (gl->gl_state == LM_ST_UNLOCKED)
- return 0;
- if (!list_empty(&gl->gl_holders))
- return 0;
- if (glops->go_demote_ok)
- return glops->go_demote_ok(gl);
- return 1;
-}
-
static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
{
struct gfs2_glock *gl;
int may_demote;
int nr_skipped = 0;
- int got_ref = 0;
LIST_HEAD(skipped);
if (nr == 0)
@@ -1315,37 +1361,29 @@
list_del_init(&gl->gl_lru);
atomic_dec(&lru_count);
+ /* Check if glock is about to be freed */
+ if (atomic_read(&gl->gl_ref) == 0)
+ continue;
+
/* Test for being demotable */
if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
gfs2_glock_hold(gl);
- got_ref = 1;
spin_unlock(&lru_lock);
spin_lock(&gl->gl_spin);
may_demote = demote_ok(gl);
- spin_unlock(&gl->gl_spin);
- clear_bit(GLF_LOCK, &gl->gl_flags);
if (may_demote) {
handle_callback(gl, LM_ST_UNLOCKED, 0);
nr--;
- if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
- gfs2_glock_put(gl);
- got_ref = 0;
}
+ if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
+ gfs2_glock_put_nolock(gl);
+ spin_unlock(&gl->gl_spin);
+ clear_bit(GLF_LOCK, &gl->gl_flags);
spin_lock(&lru_lock);
- if (may_demote)
- continue;
+ continue;
}
- if (list_empty(&gl->gl_lru) &&
- (atomic_read(&gl->gl_ref) <= (2 + got_ref))) {
- nr_skipped++;
- list_add(&gl->gl_lru, &skipped);
- }
- if (got_ref) {
- spin_unlock(&lru_lock);
- gfs2_glock_put(gl);
- spin_lock(&lru_lock);
- got_ref = 0;
- }
+ nr_skipped++;
+ list_add(&gl->gl_lru, &skipped);
}
list_splice(&skipped, &lru_list);
atomic_add(nr_skipped, &lru_count);
@@ -1727,6 +1765,11 @@
glock_workqueue = create_workqueue("glock_workqueue");
if (IS_ERR(glock_workqueue))
return PTR_ERR(glock_workqueue);
+ gfs2_delete_workqueue = create_workqueue("delete_workqueue");
+ if (IS_ERR(gfs2_delete_workqueue)) {
+ destroy_workqueue(glock_workqueue);
+ return PTR_ERR(gfs2_delete_workqueue);
+ }
register_shrinker(&glock_shrinker);
@@ -1737,6 +1780,7 @@
{
unregister_shrinker(&glock_shrinker);
destroy_workqueue(glock_workqueue);
+ destroy_workqueue(gfs2_delete_workqueue);
}
static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index a602a28..c609894 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -143,6 +143,7 @@
#define GLR_TRYFAILED 13
+extern struct workqueue_struct *gfs2_delete_workqueue;
static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl)
{
struct gfs2_holder *gh;
@@ -191,6 +192,8 @@
int gfs2_glock_get(struct gfs2_sbd *sdp,
u64 number, const struct gfs2_glock_operations *glops,
int create, struct gfs2_glock **glp);
+void gfs2_glock_hold(struct gfs2_glock *gl);
+void gfs2_glock_put_nolock(struct gfs2_glock *gl);
int gfs2_glock_put(struct gfs2_glock *gl);
void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags,
struct gfs2_holder *gh);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index d5e4ab1..6985eef 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -323,6 +323,7 @@
if (gl->gl_state != LM_ST_UNLOCKED &&
test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
+ flush_workqueue(gfs2_delete_workqueue);
gfs2_meta_syncfs(sdp);
gfs2_log_shutdown(sdp);
}
@@ -372,6 +373,25 @@
return 0;
}
+/**
+ * iopen_go_callback - schedule the dcache entry for the inode to be deleted
+ * @gl: the glock
+ *
+ * gl_spin lock is held while calling this
+ */
+static void iopen_go_callback(struct gfs2_glock *gl)
+{
+ struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object;
+
+ if (gl->gl_demote_state == LM_ST_UNLOCKED &&
+ gl->gl_state == LM_ST_SHARED &&
+ ip && test_bit(GIF_USER, &ip->i_flags)) {
+ gfs2_glock_hold(gl);
+ if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+ gfs2_glock_put_nolock(gl);
+ }
+}
+
const struct gfs2_glock_operations gfs2_meta_glops = {
.go_type = LM_TYPE_META,
};
@@ -406,6 +426,7 @@
const struct gfs2_glock_operations gfs2_iopen_glops = {
.go_type = LM_TYPE_IOPEN,
+ .go_callback = iopen_go_callback,
};
const struct gfs2_glock_operations gfs2_flock_glops = {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 225347f..61801ad 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -159,6 +159,7 @@
int (*go_lock) (struct gfs2_holder *gh);
void (*go_unlock) (struct gfs2_holder *gh);
int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl);
+ void (*go_callback) (struct gfs2_glock *gl);
const int go_type;
const unsigned long go_min_hold_time;
};
@@ -228,6 +229,7 @@
struct list_head gl_ail_list;
atomic_t gl_ail_count;
struct delayed_work gl_work;
+ struct work_struct gl_delete;
};
#define GFS2_MIN_LVB_SIZE 32 /* Min size of LVB that gfs2 supports */
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index daa4ae3..fba7957 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -285,27 +285,19 @@
}
tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes;
- if (count[1] + count[2] != tmp) {
+ if (count[1] != tmp) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "used data mismatch: %u != %u\n",
count[1], tmp);
return;
}
- if (count[3] != rgd->rd_dinodes) {
+ if (count[2] + count[3] != rgd->rd_dinodes) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "used metadata mismatch: %u != %u\n",
- count[3], rgd->rd_dinodes);
+ count[2] + count[3], rgd->rd_dinodes);
return;
}
-
- if (count[2] > count[3]) {
- if (gfs2_consist_rgrpd(rgd))
- fs_err(sdp, "unlinked inodes > inodes: %u\n",
- count[2]);
- return;
- }
-
}
static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block)
@@ -961,7 +953,8 @@
* Returns: The inode, if one has been found
*/
-static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
+static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
+ u64 skip)
{
struct inode *inode;
u32 goal = 0, block;
@@ -985,6 +978,8 @@
goal++;
if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked)
continue;
+ if (no_addr == skip)
+ continue;
*last_unlinked = no_addr;
inode = gfs2_inode_lookup(rgd->rd_sbd->sd_vfs, DT_UNKNOWN,
no_addr, -1, 1);
@@ -1104,7 +1099,7 @@
if (try_rgrp_fit(rgd, al))
goto out;
if (rgd->rd_flags & GFS2_RDF_CHECK)
- inode = try_rgrp_unlink(rgd, last_unlinked);
+ inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
if (inode)
@@ -1138,7 +1133,7 @@
if (try_rgrp_fit(rgd, al))
goto out;
if (rgd->rd_flags & GFS2_RDF_CHECK)
- inode = try_rgrp_unlink(rgd, last_unlinked);
+ inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
if (!rg_locked)
gfs2_glock_dq_uninit(&al->al_rgd_gh);
if (inode)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 0a68013..f522bb0 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -353,7 +353,7 @@
return error;
}
-static void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
+void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
{
const struct gfs2_statfs_change *str = buf;
@@ -441,6 +441,29 @@
brelse(l_bh);
}
+void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+ struct buffer_head *l_bh)
+{
+ struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+ struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
+ struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
+ struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+
+ gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
+
+ spin_lock(&sdp->sd_statfs_spin);
+ m_sc->sc_total += l_sc->sc_total;
+ m_sc->sc_free += l_sc->sc_free;
+ m_sc->sc_dinodes += l_sc->sc_dinodes;
+ memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
+ memset(l_bh->b_data + sizeof(struct gfs2_dinode),
+ 0, sizeof(struct gfs2_statfs_change));
+ spin_unlock(&sdp->sd_statfs_spin);
+
+ gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
+ gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+}
+
int gfs2_statfs_sync(struct gfs2_sbd *sdp)
{
struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
@@ -477,19 +500,7 @@
if (error)
goto out_bh2;
- gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
-
- spin_lock(&sdp->sd_statfs_spin);
- m_sc->sc_total += l_sc->sc_total;
- m_sc->sc_free += l_sc->sc_free;
- m_sc->sc_dinodes += l_sc->sc_dinodes;
- memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
- memset(l_bh->b_data + sizeof(struct gfs2_dinode),
- 0, sizeof(struct gfs2_statfs_change));
- spin_unlock(&sdp->sd_statfs_spin);
-
- gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
- gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+ update_statfs(sdp, m_bh, l_bh);
gfs2_trans_end(sdp);
@@ -680,6 +691,7 @@
struct gfs2_holder t_gh;
int error;
+ flush_workqueue(gfs2_delete_workqueue);
gfs2_quota_sync(sdp);
gfs2_statfs_sync(sdp);
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index b56413e..22e0417 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -40,6 +40,10 @@
extern int gfs2_statfs_init(struct gfs2_sbd *sdp);
extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
s64 dinodes);
+extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc,
+ const void *buf);
+extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+ struct buffer_head *l_bh);
extern int gfs2_statfs_sync(struct gfs2_sbd *sdp);
extern int gfs2_freeze_fs(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
index 98d6ef1..148d55c 100644
--- a/fs/gfs2/trace_gfs2.h
+++ b/fs/gfs2/trace_gfs2.h
@@ -1,12 +1,11 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+
#if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_GFS2_H
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM gfs2
-#define TRACE_INCLUDE_FILE trace_gfs2
-
#include <linux/fs.h>
#include <linux/buffer_head.h>
#include <linux/dlmconstants.h>
@@ -403,5 +402,6 @@
/* This part must be outside protection */
#undef TRACE_INCLUDE_PATH
#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_gfs2
#include <trace/define_trace.h>
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 6f833dc..f7fcbe4 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -19,6 +19,7 @@
#include <linux/nls.h>
#include <linux/parser.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/vfs.h>
#include "hfs_fs.h"
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 9fc3af0c..c0759fe 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -12,6 +12,7 @@
#include <linux/pagemap.h>
#include <linux/fs.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/vfs.h>
#include <linux/nls.h>
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index fe02ad4..032604e 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -972,6 +972,7 @@
sb->s_blocksize_bits = 10;
sb->s_magic = HOSTFS_SUPER_MAGIC;
sb->s_op = &hostfs_sbops;
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
/* NULL is printed as <NULL> by sprintf: avoid that. */
if (req_root == NULL)
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index 6916c41..8865c94 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -6,6 +6,7 @@
* directory VFS functions
*/
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
static int hpfs_dir_release(struct inode *inode, struct file *filp)
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 64ab522..3efabff 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -6,6 +6,7 @@
* file VFS functions
*/
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
#define BLOCKS(size) (((size) + 511) >> 9)
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c2ea31b..701ca54 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -13,7 +13,6 @@
#include <linux/pagemap.h>
#include <linux/buffer_head.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include "hpfs.h"
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 39a1bfb..fe703ae 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -6,6 +6,7 @@
* inode VFS functions
*/
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
void hpfs_init_inode(struct inode *i)
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index b649232..82b9c4b 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -6,6 +6,7 @@
* adding & removing files & directories
*/
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include "hpfs_fn.h"
static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
diff --git a/fs/inode.c b/fs/inode.c
index 901bad1..ae7b67e 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -120,12 +120,11 @@
* These are initializations that need to be done on every inode
* allocation as the fields are not initialised by slab allocation.
*/
-struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
+int inode_init_always(struct super_block *sb, struct inode *inode)
{
static const struct address_space_operations empty_aops;
static struct inode_operations empty_iops;
static const struct file_operations empty_fops;
-
struct address_space *const mapping = &inode->i_data;
inode->i_sb = sb;
@@ -152,7 +151,7 @@
inode->dirtied_when = 0;
if (security_inode_alloc(inode))
- goto out_free_inode;
+ goto out;
/* allocate and initialize an i_integrity */
if (ima_inode_alloc(inode))
@@ -198,16 +197,12 @@
inode->i_fsnotify_mask = 0;
#endif
- return inode;
+ return 0;
out_free_security:
security_inode_free(inode);
-out_free_inode:
- if (inode->i_sb->s_op->destroy_inode)
- inode->i_sb->s_op->destroy_inode(inode);
- else
- kmem_cache_free(inode_cachep, (inode));
- return NULL;
+out:
+ return -ENOMEM;
}
EXPORT_SYMBOL(inode_init_always);
@@ -220,12 +215,21 @@
else
inode = kmem_cache_alloc(inode_cachep, GFP_KERNEL);
- if (inode)
- return inode_init_always(sb, inode);
- return NULL;
+ if (!inode)
+ return NULL;
+
+ if (unlikely(inode_init_always(sb, inode))) {
+ if (inode->i_sb->s_op->destroy_inode)
+ inode->i_sb->s_op->destroy_inode(inode);
+ else
+ kmem_cache_free(inode_cachep, inode);
+ return NULL;
+ }
+
+ return inode;
}
-void destroy_inode(struct inode *inode)
+void __destroy_inode(struct inode *inode)
{
BUG_ON(inode_has_buffers(inode));
ima_inode_free(inode);
@@ -237,13 +241,17 @@
if (inode->i_default_acl && inode->i_default_acl != ACL_NOT_CACHED)
posix_acl_release(inode->i_default_acl);
#endif
+}
+EXPORT_SYMBOL(__destroy_inode);
+
+void destroy_inode(struct inode *inode)
+{
+ __destroy_inode(inode);
if (inode->i_sb->s_op->destroy_inode)
inode->i_sb->s_op->destroy_inode(inode);
else
kmem_cache_free(inode_cachep, (inode));
}
-EXPORT_SYMBOL(destroy_inode);
-
/*
* These are initializations that only need to be done
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 58a7963..85f96bc 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -142,6 +142,7 @@
struct iso9660_options{
unsigned int rock:1;
+ unsigned int joliet:1;
unsigned int cruft:1;
unsigned int hide:1;
unsigned int showassoc:1;
@@ -151,7 +152,6 @@
unsigned int gid_set:1;
unsigned int utf8:1;
unsigned char map;
- char joliet;
unsigned char check;
unsigned int blocksize;
mode_t fmode;
@@ -632,7 +632,7 @@
else if (isonum_711(vdp->type) == ISO_VD_SUPPLEMENTARY) {
sec = (struct iso_supplementary_descriptor *)vdp;
if (sec->escape[0] == 0x25 && sec->escape[1] == 0x2f) {
- if (opt.joliet == 'y') {
+ if (opt.joliet) {
if (sec->escape[2] == 0x40)
joliet_level = 1;
else if (sec->escape[2] == 0x43)
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 737f724..f96f850 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -287,6 +287,7 @@
struct page *new_page;
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
+ journal_t *journal = transaction->t_journal;
/*
* The buffer really shouldn't be locked: only the current committing
@@ -300,6 +301,11 @@
J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+ /* keep subsequent assertions sane */
+ new_bh->b_state = 0;
+ init_buffer(new_bh, NULL, NULL);
+ atomic_set(&new_bh->b_count, 1);
+ new_jh = journal_add_journal_head(new_bh); /* This sleeps */
/*
* If a new transaction has already done a buffer copy-out, then
@@ -361,14 +367,6 @@
kunmap_atomic(mapped_data, KM_USER0);
}
- /* keep subsequent assertions sane */
- new_bh->b_state = 0;
- init_buffer(new_bh, NULL, NULL);
- atomic_set(&new_bh->b_count, 1);
- jbd_unlock_bh_state(bh_in);
-
- new_jh = journal_add_journal_head(new_bh); /* This sleeps */
-
set_bh_page(new_bh, new_page, new_offset);
new_jh->b_transaction = NULL;
new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -385,7 +383,11 @@
* copying is moved to the transaction's shadow queue.
*/
JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
- journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_lock(&journal->j_list_lock);
+ __journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_unlock(&journal->j_list_lock);
+ jbd_unlock_bh_state(bh_in);
+
JBUFFER_TRACE(new_jh, "file as BJ_IO");
journal_file_buffer(new_jh, transaction, BJ_IO);
@@ -848,6 +850,12 @@
first = be32_to_cpu(sb->s_first);
last = be32_to_cpu(sb->s_maxlen);
+ if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) {
+ printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n",
+ first, last);
+ journal_fail_superblock(journal);
+ return -EINVAL;
+ }
journal->j_first = first;
journal->j_last = last;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 73242ba..c03ac11 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -489,34 +489,15 @@
wake_up(&journal->j_wait_transaction_locked);
}
-/*
- * Report any unexpected dirty buffers which turn up. Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible. #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
{
- int jlist;
+ char b[BDEVNAME_SIZE];
- /* If this buffer is one which might reasonably be dirty
- * --- ie. data, or not part of this journal --- then
- * we're OK to leave it alone, but otherwise we need to
- * move the dirty bit to the journal's own internal
- * JBDDirty bit. */
- jlist = jh->b_jlist;
-
- if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
- jlist == BJ_Shadow || jlist == BJ_Forget) {
- struct buffer_head *bh = jh2bh(jh);
-
- if (test_clear_buffer_dirty(bh))
- set_buffer_jbddirty(bh);
- }
+ printk(KERN_WARNING
+ "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+ "There's a risk of filesystem corruption in case of system "
+ "crash.\n",
+ bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
}
/*
@@ -583,14 +564,16 @@
if (jh->b_next_transaction)
J_ASSERT_JH(jh, jh->b_next_transaction ==
transaction);
+ warn_dirty_buffer(bh);
}
/*
* In any case we need to clean the dirty flag and we must
* do it under the buffer lock to be sure we don't race
* with running write-out.
*/
- JBUFFER_TRACE(jh, "Unexpected dirty buffer");
- jbd_unexpected_dirty_buffer(jh);
+ JBUFFER_TRACE(jh, "Journalling dirty buffer");
+ clear_buffer_dirty(bh);
+ set_buffer_jbddirty(bh);
}
unlock_buffer(bh);
@@ -826,6 +809,15 @@
J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
if (jh->b_transaction == NULL) {
+ /*
+ * Previous journal_forget() could have left the buffer
+ * with jbddirty bit set because it was being committed. When
+ * the commit finished, we've filed the buffer for
+ * checkpointing and marked it dirty. Now we are reallocating
+ * the buffer so the transaction freeing it must have
+ * committed and so it's safe to clear the dirty bit.
+ */
+ clear_buffer_dirty(jh2bh(jh));
jh->b_transaction = transaction;
/* first access by this transaction */
@@ -1782,8 +1774,13 @@
if (jh->b_cp_transaction) {
JBUFFER_TRACE(jh, "on running+cp transaction");
+ /*
+ * We don't want to write the buffer anymore, clear the
+ * bit so that we don't confuse checks in
+ * __journal_file_buffer
+ */
+ clear_buffer_dirty(bh);
__journal_file_buffer(jh, transaction, BJ_Forget);
- clear_buffer_jbddirty(bh);
may_free = 0;
} else {
JBUFFER_TRACE(jh, "on running transaction");
@@ -2041,12 +2038,17 @@
if (jh->b_transaction && jh->b_jlist == jlist)
return;
- /* The following list of buffer states needs to be consistent
- * with __jbd_unexpected_dirty_buffer()'s handling of dirty
- * state. */
-
if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
jlist == BJ_Shadow || jlist == BJ_Forget) {
+ /*
+ * For metadata buffers, we track dirty bit in buffer_jbddirty
+ * instead of buffer_dirty. We should not see a dirty bit set
+ * here because we clear it in do_get_write_access but e.g.
+ * tune2fs can modify the sb and set the dirty bit at any time
+ * so we try to gracefully handle that.
+ */
+ if (buffer_dirty(bh))
+ warn_dirty_buffer(bh);
if (test_clear_buffer_dirty(bh) ||
test_clear_buffer_jbddirty(bh))
was_dirty = 1;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 18bfd5d..e378cb3 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,6 +297,7 @@
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
struct jbd2_buffer_trigger_type *triggers;
+ journal_t *journal = transaction->t_journal;
/*
* The buffer really shouldn't be locked: only the current committing
@@ -310,6 +311,11 @@
J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+ /* keep subsequent assertions sane */
+ new_bh->b_state = 0;
+ init_buffer(new_bh, NULL, NULL);
+ atomic_set(&new_bh->b_count, 1);
+ new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */
/*
* If a new transaction has already done a buffer copy-out, then
@@ -388,14 +394,6 @@
kunmap_atomic(mapped_data, KM_USER0);
}
- /* keep subsequent assertions sane */
- new_bh->b_state = 0;
- init_buffer(new_bh, NULL, NULL);
- atomic_set(&new_bh->b_count, 1);
- jbd_unlock_bh_state(bh_in);
-
- new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */
-
set_bh_page(new_bh, new_page, new_offset);
new_jh->b_transaction = NULL;
new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -412,7 +410,11 @@
* copying is moved to the transaction's shadow queue.
*/
JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
- jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_lock(&journal->j_list_lock);
+ __jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+ spin_unlock(&journal->j_list_lock);
+ jbd_unlock_bh_state(bh_in);
+
JBUFFER_TRACE(new_jh, "file as BJ_IO");
jbd2_journal_file_buffer(new_jh, transaction, BJ_IO);
@@ -2410,6 +2412,7 @@
int i = hash_32(device, CACHE_SIZE_BITS);
char *ret;
struct block_device *bd;
+ static struct devname_cache *new_dev;
rcu_read_lock();
if (devcache[i] && devcache[i]->device == device) {
@@ -2419,20 +2422,20 @@
}
rcu_read_unlock();
+ new_dev = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
+ if (!new_dev)
+ return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
spin_lock(&devname_cache_lock);
if (devcache[i]) {
if (devcache[i]->device == device) {
+ kfree(new_dev);
ret = devcache[i]->devname;
spin_unlock(&devname_cache_lock);
return ret;
}
call_rcu(&devcache[i]->rcu, free_devcache);
}
- devcache[i] = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
- if (!devcache[i]) {
- spin_unlock(&devname_cache_lock);
- return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
- }
+ devcache[i] = new_dev;
devcache[i]->device = device;
bd = bdget(device);
if (bd) {
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 494501e..6213ac7 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -499,34 +499,15 @@
wake_up(&journal->j_wait_transaction_locked);
}
-/*
- * Report any unexpected dirty buffers which turn up. Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible. #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
{
- int jlist;
+ char b[BDEVNAME_SIZE];
- /* If this buffer is one which might reasonably be dirty
- * --- ie. data, or not part of this journal --- then
- * we're OK to leave it alone, but otherwise we need to
- * move the dirty bit to the journal's own internal
- * JBDDirty bit. */
- jlist = jh->b_jlist;
-
- if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
- jlist == BJ_Shadow || jlist == BJ_Forget) {
- struct buffer_head *bh = jh2bh(jh);
-
- if (test_clear_buffer_dirty(bh))
- set_buffer_jbddirty(bh);
- }
+ printk(KERN_WARNING
+ "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+ "There's a risk of filesystem corruption in case of system "
+ "crash.\n",
+ bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
}
/*
@@ -593,14 +574,16 @@
if (jh->b_next_transaction)
J_ASSERT_JH(jh, jh->b_next_transaction ==
transaction);
+ warn_dirty_buffer(bh);
}
/*
* In any case we need to clean the dirty flag and we must
* do it under the buffer lock to be sure we don't race
* with running write-out.
*/
- JBUFFER_TRACE(jh, "Unexpected dirty buffer");
- jbd_unexpected_dirty_buffer(jh);
+ JBUFFER_TRACE(jh, "Journalling dirty buffer");
+ clear_buffer_dirty(bh);
+ set_buffer_jbddirty(bh);
}
unlock_buffer(bh);
@@ -843,6 +826,15 @@
J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
if (jh->b_transaction == NULL) {
+ /*
+ * Previous jbd2_journal_forget() could have left the buffer
+ * with jbddirty bit set because it was being committed. When
+ * the commit finished, we've filed the buffer for
+ * checkpointing and marked it dirty. Now we are reallocating
+ * the buffer so the transaction freeing it must have
+ * committed and so it's safe to clear the dirty bit.
+ */
+ clear_buffer_dirty(jh2bh(jh));
jh->b_transaction = transaction;
/* first access by this transaction */
@@ -1644,8 +1636,13 @@
if (jh->b_cp_transaction) {
JBUFFER_TRACE(jh, "on running+cp transaction");
+ /*
+ * We don't want to write the buffer anymore, clear the
+ * bit so that we don't confuse checks in
+ * __journal_file_buffer
+ */
+ clear_buffer_dirty(bh);
__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
- clear_buffer_jbddirty(bh);
may_free = 0;
} else {
JBUFFER_TRACE(jh, "on running transaction");
@@ -1896,12 +1893,17 @@
if (jh->b_transaction && jh->b_jlist == jlist)
return;
- /* The following list of buffer states needs to be consistent
- * with __jbd_unexpected_dirty_buffer()'s handling of dirty
- * state. */
-
if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
jlist == BJ_Shadow || jlist == BJ_Forget) {
+ /*
+ * For metadata buffers, we track dirty bit in buffer_jbddirty
+ * instead of buffer_dirty. We should not see a dirty bit set
+ * here because we clear it in do_get_write_access but e.g.
+ * tune2fs can modify the sb and set the dirty bit at any time
+ * so we try to gracefully handle that.
+ */
+ if (buffer_dirty(bh))
+ warn_dirty_buffer(bh);
if (test_clear_buffer_dirty(bh) ||
test_clear_buffer_jbddirty(bh))
was_dirty = 1;
diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c
index a024474..b47679b 100644
--- a/fs/jffs2/erase.c
+++ b/fs/jffs2/erase.c
@@ -270,19 +270,21 @@
D2({
int i=0;
struct jffs2_raw_node_ref *this;
- printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n" KERN_DEBUG);
+ printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n");
this = ic->nodes;
+ printk(KERN_DEBUG);
while(this) {
- printk( "0x%08x(%d)->", ref_offset(this), ref_flags(this));
+ printk(KERN_CONT "0x%08x(%d)->",
+ ref_offset(this), ref_flags(this));
if (++i == 5) {
- printk("\n" KERN_DEBUG);
+ printk(KERN_DEBUG);
i=0;
}
this = this->next_in_ino;
}
- printk("\n");
+ printk(KERN_CONT "\n");
});
switch (ic->class) {
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 5edc2bf..23c9475 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -99,7 +99,7 @@
kunmap(pg);
D2(printk(KERN_DEBUG "readpage finished\n"));
- return 0;
+ return ret;
}
int jffs2_do_readpage_unlock(struct inode *inode, struct page *pg)
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
index 7515e73..696686c 100644
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -130,9 +130,9 @@
if (jffs2_sum_active()) {
s = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
if (!s) {
- kfree(flashbuf);
JFFS2_WARNING("Can't allocate memory for summary\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
}
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 07a22ca..0035c02 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/fs.h>
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 91fa3ad..a29c7c3 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -67,10 +67,8 @@
acl = posix_acl_from_xattr(value, size);
}
kfree(value);
- if (!IS_ERR(acl)) {
+ if (!IS_ERR(acl))
set_cached_acl(inode, type, acl);
- posix_acl_release(acl);
- }
return acl;
}
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index f2fdcbc..4336adb 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -7,6 +7,7 @@
*/
#include <linux/module.h>
+#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/fs.h>
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 99d737b..7cb076a 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -87,18 +87,6 @@
return hash & (NLM_HOST_NRHASH - 1);
}
-static void nlm_clear_port(struct sockaddr *sap)
-{
- switch (sap->sa_family) {
- case AF_INET:
- ((struct sockaddr_in *)sap)->sin_port = 0;
- break;
- case AF_INET6:
- ((struct sockaddr_in6 *)sap)->sin6_port = 0;
- break;
- }
-}
-
/*
* Common host lookup routine for server & client
*/
@@ -177,7 +165,7 @@
host->h_addrbuf = nsm->sm_addrbuf;
memcpy(nlm_addr(host), ni->sap, ni->salen);
host->h_addrlen = ni->salen;
- nlm_clear_port(nlm_addr(host));
+ rpc_set_port(nlm_addr(host), 0);
memcpy(nlm_srcaddr(host), ni->src_sap, ni->src_len);
host->h_version = ni->version;
host->h_proto = ni->protocol;
diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c
index 7fce1b5..30c9331 100644
--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -61,43 +61,6 @@
return (struct sockaddr *)&nsm->sm_addr;
}
-static void nsm_display_ipv4_address(const struct sockaddr *sap, char *buf,
- const size_t len)
-{
- const struct sockaddr_in *sin = (struct sockaddr_in *)sap;
- snprintf(buf, len, "%pI4", &sin->sin_addr.s_addr);
-}
-
-static void nsm_display_ipv6_address(const struct sockaddr *sap, char *buf,
- const size_t len)
-{
- const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
-
- if (ipv6_addr_v4mapped(&sin6->sin6_addr))
- snprintf(buf, len, "%pI4", &sin6->sin6_addr.s6_addr32[3]);
- else if (sin6->sin6_scope_id != 0)
- snprintf(buf, len, "%pI6%%%u", &sin6->sin6_addr,
- sin6->sin6_scope_id);
- else
- snprintf(buf, len, "%pI6", &sin6->sin6_addr);
-}
-
-static void nsm_display_address(const struct sockaddr *sap,
- char *buf, const size_t len)
-{
- switch (sap->sa_family) {
- case AF_INET:
- nsm_display_ipv4_address(sap, buf, len);
- break;
- case AF_INET6:
- nsm_display_ipv6_address(sap, buf, len);
- break;
- default:
- snprintf(buf, len, "unsupported address family");
- break;
- }
-}
-
static struct rpc_clnt *nsm_create(void)
{
struct sockaddr_in sin = {
@@ -307,8 +270,11 @@
memcpy(nsm_addr(new), sap, salen);
new->sm_addrlen = salen;
nsm_init_private(new);
- nsm_display_address((const struct sockaddr *)&new->sm_addr,
- new->sm_addrbuf, sizeof(new->sm_addrbuf));
+
+ if (rpc_ntop(nsm_addr(new), new->sm_addrbuf,
+ sizeof(new->sm_addrbuf)) == 0)
+ (void)snprintf(new->sm_addrbuf, sizeof(new->sm_addrbuf),
+ "unsupported address family");
memcpy(new->sm_name, hostname, hostname_len);
new->sm_name[hostname_len] = '\0';
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 17250373..bd173a6 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/time.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/in.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/clnt.h>
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index 3688e55..e1d28dd 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -10,6 +10,7 @@
#include <linux/types.h>
#include <linux/time.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/in.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/clnt.h>
diff --git a/fs/namei.c b/fs/namei.c
index 5b961eb..f3c5b27 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1761,6 +1761,10 @@
goto exit;
}
filp = nameidata_to_filp(&nd, open_flag);
+ if (IS_ERR(filp))
+ ima_counts_put(&nd.path,
+ acc_mode & (MAY_READ | MAY_WRITE |
+ MAY_EXEC));
mnt_drop_write(nd.path.mnt);
if (nd.root.mnt)
path_put(&nd.root);
@@ -1817,6 +1821,9 @@
goto exit;
}
filp = nameidata_to_filp(&nd, open_flag);
+ if (IS_ERR(filp))
+ ima_counts_put(&nd.path,
+ acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
/*
* It is now safe to drop the mnt write
* because the filp has had a write taken
diff --git a/fs/namespace.c b/fs/namespace.c
index 3dc283f..7230787 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -22,6 +22,7 @@
#include <linux/seq_file.h>
#include <linux/mnt_namespace.h>
#include <linux/namei.h>
+#include <linux/nsproxy.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/ramfs.h>
@@ -315,7 +316,8 @@
*/
int mnt_want_write_file(struct file *file)
{
- if (!(file->f_mode & FMODE_WRITE))
+ struct inode *inode = file->f_dentry->d_inode;
+ if (!(file->f_mode & FMODE_WRITE) || special_file(inode->i_mode))
return mnt_want_write(file->f_path.mnt);
else
return mnt_clone_write(file->f_path.mnt);
diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile
index 8451598..da7fda6 100644
--- a/fs/nfs/Makefile
+++ b/fs/nfs/Makefile
@@ -6,7 +6,8 @@
nfs-y := client.o dir.o file.o getroot.o inode.o super.o nfs2xdr.o \
direct.o pagelist.o proc.o read.o symlink.o unlink.o \
- write.o namespace.o mount_clnt.o
+ write.o namespace.o mount_clnt.o \
+ dns_resolve.o cache_lib.o
nfs-$(CONFIG_ROOT_NFS) += nfsroot.o
nfs-$(CONFIG_NFS_V3) += nfs3proc.o nfs3xdr.o
nfs-$(CONFIG_NFS_V3_ACL) += nfs3acl.o
diff --git a/fs/nfs/cache_lib.c b/fs/nfs/cache_lib.c
new file mode 100644
index 0000000..b4ffd01
--- /dev/null
+++ b/fs/nfs/cache_lib.c
@@ -0,0 +1,140 @@
+/*
+ * linux/fs/nfs/cache_lib.c
+ *
+ * Helper routines for the NFS client caches
+ *
+ * Copyright (c) 2009 Trond Myklebust <Trond.Myklebust@netapp.com>
+ */
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mount.h>
+#include <linux/namei.h>
+#include <linux/sunrpc/cache.h>
+#include <linux/sunrpc/rpc_pipe_fs.h>
+
+#include "cache_lib.h"
+
+#define NFS_CACHE_UPCALL_PATHLEN 256
+#define NFS_CACHE_UPCALL_TIMEOUT 15
+
+static char nfs_cache_getent_prog[NFS_CACHE_UPCALL_PATHLEN] =
+ "/sbin/nfs_cache_getent";
+static unsigned long nfs_cache_getent_timeout = NFS_CACHE_UPCALL_TIMEOUT;
+
+module_param_string(cache_getent, nfs_cache_getent_prog,
+ sizeof(nfs_cache_getent_prog), 0600);
+MODULE_PARM_DESC(cache_getent, "Path to the client cache upcall program");
+module_param_named(cache_getent_timeout, nfs_cache_getent_timeout, ulong, 0600);
+MODULE_PARM_DESC(cache_getent_timeout, "Timeout (in seconds) after which "
+ "the cache upcall is assumed to have failed");
+
+int nfs_cache_upcall(struct cache_detail *cd, char *entry_name)
+{
+ static char *envp[] = { "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL
+ };
+ char *argv[] = {
+ nfs_cache_getent_prog,
+ cd->name,
+ entry_name,
+ NULL
+ };
+ int ret = -EACCES;
+
+ if (nfs_cache_getent_prog[0] == '\0')
+ goto out;
+ ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_EXEC);
+ /*
+ * Disable the upcall mechanism if we're getting an ENOENT or
+ * EACCES error. The admin can re-enable it on the fly by using
+ * sysfs to set the 'cache_getent' parameter once the problem
+ * has been fixed.
+ */
+ if (ret == -ENOENT || ret == -EACCES)
+ nfs_cache_getent_prog[0] = '\0';
+out:
+ return ret > 0 ? 0 : ret;
+}
+
+/*
+ * Deferred request handling
+ */
+void nfs_cache_defer_req_put(struct nfs_cache_defer_req *dreq)
+{
+ if (atomic_dec_and_test(&dreq->count))
+ kfree(dreq);
+}
+
+static void nfs_dns_cache_revisit(struct cache_deferred_req *d, int toomany)
+{
+ struct nfs_cache_defer_req *dreq;
+
+ dreq = container_of(d, struct nfs_cache_defer_req, deferred_req);
+
+ complete_all(&dreq->completion);
+ nfs_cache_defer_req_put(dreq);
+}
+
+static struct cache_deferred_req *nfs_dns_cache_defer(struct cache_req *req)
+{
+ struct nfs_cache_defer_req *dreq;
+
+ dreq = container_of(req, struct nfs_cache_defer_req, req);
+ dreq->deferred_req.revisit = nfs_dns_cache_revisit;
+ atomic_inc(&dreq->count);
+
+ return &dreq->deferred_req;
+}
+
+struct nfs_cache_defer_req *nfs_cache_defer_req_alloc(void)
+{
+ struct nfs_cache_defer_req *dreq;
+
+ dreq = kzalloc(sizeof(*dreq), GFP_KERNEL);
+ if (dreq) {
+ init_completion(&dreq->completion);
+ atomic_set(&dreq->count, 1);
+ dreq->req.defer = nfs_dns_cache_defer;
+ }
+ return dreq;
+}
+
+int nfs_cache_wait_for_upcall(struct nfs_cache_defer_req *dreq)
+{
+ if (wait_for_completion_timeout(&dreq->completion,
+ nfs_cache_getent_timeout * HZ) == 0)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+int nfs_cache_register(struct cache_detail *cd)
+{
+ struct nameidata nd;
+ struct vfsmount *mnt;
+ int ret;
+
+ mnt = rpc_get_mount();
+ if (IS_ERR(mnt))
+ return PTR_ERR(mnt);
+ ret = vfs_path_lookup(mnt->mnt_root, mnt, "/cache", 0, &nd);
+ if (ret)
+ goto err;
+ ret = sunrpc_cache_register_pipefs(nd.path.dentry,
+ cd->name, 0600, cd);
+ path_put(&nd.path);
+ if (!ret)
+ return ret;
+err:
+ rpc_put_mount();
+ return ret;
+}
+
+void nfs_cache_unregister(struct cache_detail *cd)
+{
+ sunrpc_cache_unregister_pipefs(cd);
+ rpc_put_mount();
+}
+
diff --git a/fs/nfs/cache_lib.h b/fs/nfs/cache_lib.h
new file mode 100644
index 0000000..76f856e
--- /dev/null
+++ b/fs/nfs/cache_lib.h
@@ -0,0 +1,27 @@
+/*
+ * Helper routines for the NFS client caches
+ *
+ * Copyright (c) 2009 Trond Myklebust <Trond.Myklebust@netapp.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/sunrpc/cache.h>
+#include <asm/atomic.h>
+
+/*
+ * Deferred request handling
+ */
+struct nfs_cache_defer_req {
+ struct cache_req req;
+ struct cache_deferred_req deferred_req;
+ struct completion completion;
+ atomic_t count;
+};
+
+extern int nfs_cache_upcall(struct cache_detail *cd, char *entry_name);
+extern struct nfs_cache_defer_req *nfs_cache_defer_req_alloc(void);
+extern void nfs_cache_defer_req_put(struct nfs_cache_defer_req *dreq);
+extern int nfs_cache_wait_for_upcall(struct nfs_cache_defer_req *dreq);
+
+extern int nfs_cache_register(struct cache_detail *cd);
+extern void nfs_cache_unregister(struct cache_detail *cd);
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 7f604c7..293fa05 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -43,21 +43,29 @@
unsigned int nfs_callback_set_tcpport;
unsigned short nfs_callback_tcpport;
unsigned short nfs_callback_tcpport6;
-static const int nfs_set_port_min = 0;
-static const int nfs_set_port_max = 65535;
+#define NFS_CALLBACK_MAXPORTNR (65535U)
-static int param_set_port(const char *val, struct kernel_param *kp)
+static int param_set_portnr(const char *val, struct kernel_param *kp)
{
- char *endp;
- int num = simple_strtol(val, &endp, 0);
- if (endp == val || *endp || num < nfs_set_port_min || num > nfs_set_port_max)
+ unsigned long num;
+ int ret;
+
+ if (!val)
return -EINVAL;
- *((int *)kp->arg) = num;
+ ret = strict_strtoul(val, 0, &num);
+ if (ret == -EINVAL || num > NFS_CALLBACK_MAXPORTNR)
+ return -EINVAL;
+ *((unsigned int *)kp->arg) = num;
return 0;
}
-module_param_call(callback_tcpport, param_set_port, param_get_int,
- &nfs_callback_set_tcpport, 0644);
+static int param_get_portnr(char *buffer, struct kernel_param *kp)
+{
+ return param_get_uint(buffer, kp);
+}
+#define param_check_portnr(name, p) __param_check(name, p, unsigned int);
+
+module_param_named(callback_tcpport, nfs_callback_set_tcpport, portnr, 0644);
/*
* This is the NFSv4 callback kernel thread.
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index c2d0616..d36925f 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -809,6 +809,9 @@
/* Initialise the client representation from the mount data */
server->flags = data->flags;
server->options = data->options;
+ server->caps |= NFS_CAP_HARDLINKS|NFS_CAP_SYMLINKS|NFS_CAP_FILEID|
+ NFS_CAP_MODE|NFS_CAP_NLINK|NFS_CAP_OWNER|NFS_CAP_OWNER_GROUP|
+ NFS_CAP_ATIME|NFS_CAP_CTIME|NFS_CAP_MTIME;
if (data->rsize)
server->rsize = nfs_block_size(data->rsize, NULL);
@@ -1074,10 +1077,6 @@
(unsigned long long) server->fsid.major,
(unsigned long long) server->fsid.minor);
- BUG_ON(!server->nfs_client);
- BUG_ON(!server->nfs_client->rpc_ops);
- BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
spin_lock(&nfs_client_lock);
list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
list_add_tail(&server->master_link, &nfs_volume_list);
@@ -1242,20 +1241,6 @@
return error;
}
-/*
- * Initialize a session.
- * Note: save the mount rsize and wsize for create_server negotiation.
- */
-static void nfs4_init_session(struct nfs_client *clp,
- unsigned int wsize, unsigned int rsize)
-{
-#if defined(CONFIG_NFS_V4_1)
- if (nfs4_has_session(clp)) {
- clp->cl_session->fc_attrs.max_rqst_sz = wsize;
- clp->cl_session->fc_attrs.max_resp_sz = rsize;
- }
-#endif /* CONFIG_NFS_V4_1 */
-}
/*
* Session has been established, and the client marked ready.
@@ -1288,7 +1273,7 @@
/* Initialise the client representation from the mount data */
server->flags = data->flags;
- server->caps |= NFS_CAP_ATOMIC_OPEN;
+ server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR;
server->options = data->options;
/* Get a client record */
@@ -1350,7 +1335,9 @@
BUG_ON(!server->nfs_client->rpc_ops);
BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
- nfs4_init_session(server->nfs_client, server->wsize, server->rsize);
+ error = nfs4_init_session(server);
+ if (error < 0)
+ goto error;
/* Probe the root fh to retrieve its FSID */
error = nfs4_path_walk(server, mntfh, data->nfs_server.export_path);
@@ -1371,10 +1358,6 @@
if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
server->namelen = NFS4_MAXNAMLEN;
- BUG_ON(!server->nfs_client);
- BUG_ON(!server->nfs_client->rpc_ops);
- BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
-
spin_lock(&nfs_client_lock);
list_add_tail(&server->client_link, &server->nfs_client->cl_superblocks);
list_add_tail(&server->master_link, &nfs_volume_list);
@@ -1412,7 +1395,7 @@
/* Initialise the client representation from the parent server */
nfs_server_copy_userdata(server, parent_server);
- server->caps |= NFS_CAP_ATOMIC_OPEN;
+ server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR;
/* Get a client representation.
* Note: NFSv4 always uses TCP, */
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index af05b91..6dd48a4 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -10,6 +10,7 @@
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/nfs4.h>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 89f98e9..32062c3 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -29,7 +29,6 @@
#include <linux/nfs_fs.h>
#include <linux/nfs_mount.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/pagevec.h>
#include <linux/namei.h>
#include <linux/mount.h>
@@ -1026,12 +1025,12 @@
res = NULL;
goto out;
/* This turned out not to be a regular file */
- case -EISDIR:
case -ENOTDIR:
goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
+ /* case -EISDIR: */
/* case -EINVAL: */
default:
goto out;
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 489fc01..6c32100 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -255,7 +255,7 @@
if (put_dreq(dreq))
nfs_direct_complete(dreq);
- nfs_readdata_release(calldata);
+ nfs_readdata_free(data);
}
static const struct rpc_call_ops nfs_read_direct_ops = {
@@ -314,14 +314,14 @@
data->npages, 1, 0, data->pagevec, NULL);
up_read(¤t->mm->mmap_sem);
if (result < 0) {
- nfs_readdata_release(data);
+ nfs_readdata_free(data);
break;
}
if ((unsigned)result < data->npages) {
bytes = result * PAGE_SIZE;
if (bytes <= pgbase) {
nfs_direct_release_pages(data->pagevec, result);
- nfs_readdata_release(data);
+ nfs_readdata_free(data);
break;
}
bytes -= pgbase;
@@ -334,7 +334,7 @@
data->inode = inode;
data->cred = msg.rpc_cred;
data->args.fh = NFS_FH(inode);
- data->args.context = get_nfs_open_context(ctx);
+ data->args.context = ctx;
data->args.offset = pos;
data->args.pgbase = pgbase;
data->args.pages = data->pagevec;
@@ -441,7 +441,7 @@
struct nfs_write_data *data = list_entry(dreq->rewrite_list.next, struct nfs_write_data, pages);
list_del(&data->pages);
nfs_direct_release_pages(data->pagevec, data->npages);
- nfs_writedata_release(data);
+ nfs_writedata_free(data);
}
}
@@ -534,7 +534,7 @@
dprintk("NFS: %5u commit returned %d\n", data->task.tk_pid, status);
nfs_direct_write_complete(dreq, data->inode);
- nfs_commitdata_release(calldata);
+ nfs_commit_free(data);
}
static const struct rpc_call_ops nfs_commit_direct_ops = {
@@ -570,7 +570,7 @@
data->args.fh = NFS_FH(data->inode);
data->args.offset = 0;
data->args.count = 0;
- data->args.context = get_nfs_open_context(dreq->ctx);
+ data->args.context = dreq->ctx;
data->res.count = 0;
data->res.fattr = &data->fattr;
data->res.verf = &data->verf;
@@ -734,14 +734,14 @@
data->npages, 0, 0, data->pagevec, NULL);
up_read(¤t->mm->mmap_sem);
if (result < 0) {
- nfs_writedata_release(data);
+ nfs_writedata_free(data);
break;
}
if ((unsigned)result < data->npages) {
bytes = result * PAGE_SIZE;
if (bytes <= pgbase) {
nfs_direct_release_pages(data->pagevec, result);
- nfs_writedata_release(data);
+ nfs_writedata_free(data);
break;
}
bytes -= pgbase;
@@ -756,7 +756,7 @@
data->inode = inode;
data->cred = msg.rpc_cred;
data->args.fh = NFS_FH(inode);
- data->args.context = get_nfs_open_context(ctx);
+ data->args.context = ctx;
data->args.offset = pos;
data->args.pgbase = pgbase;
data->args.pages = data->pagevec;
@@ -934,9 +934,6 @@
* back into its cache. We let the server do generic write
* parameter checking and report problems.
*
- * We also avoid an unnecessary invocation of generic_osync_inode(),
- * as it is fairly meaningless to sync the metadata of an NFS file.
- *
* We eliminate local atime updates, see direct read above.
*
* We avoid unnecessary page cache invalidations for normal cached
diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c
new file mode 100644
index 0000000..f4d54ba
--- /dev/null
+++ b/fs/nfs/dns_resolve.c
@@ -0,0 +1,335 @@
+/*
+ * linux/fs/nfs/dns_resolve.c
+ *
+ * Copyright (c) 2009 Trond Myklebust <Trond.Myklebust@netapp.com>
+ *
+ * Resolves DNS hostnames into valid ip addresses
+ */
+
+#include <linux/hash.h>
+#include <linux/string.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/socket.h>
+#include <linux/seq_file.h>
+#include <linux/inet.h>
+#include <linux/sunrpc/clnt.h>
+#include <linux/sunrpc/cache.h>
+#include <linux/sunrpc/svcauth.h>
+
+#include "dns_resolve.h"
+#include "cache_lib.h"
+
+#define NFS_DNS_HASHBITS 4
+#define NFS_DNS_HASHTBL_SIZE (1 << NFS_DNS_HASHBITS)
+
+static struct cache_head *nfs_dns_table[NFS_DNS_HASHTBL_SIZE];
+
+struct nfs_dns_ent {
+ struct cache_head h;
+
+ char *hostname;
+ size_t namelen;
+
+ struct sockaddr_storage addr;
+ size_t addrlen;
+};
+
+
+static void nfs_dns_ent_init(struct cache_head *cnew,
+ struct cache_head *ckey)
+{
+ struct nfs_dns_ent *new;
+ struct nfs_dns_ent *key;
+
+ new = container_of(cnew, struct nfs_dns_ent, h);
+ key = container_of(ckey, struct nfs_dns_ent, h);
+
+ kfree(new->hostname);
+ new->hostname = kstrndup(key->hostname, key->namelen, GFP_KERNEL);
+ if (new->hostname) {
+ new->namelen = key->namelen;
+ memcpy(&new->addr, &key->addr, key->addrlen);
+ new->addrlen = key->addrlen;
+ } else {
+ new->namelen = 0;
+ new->addrlen = 0;
+ }
+}
+
+static void nfs_dns_ent_put(struct kref *ref)
+{
+ struct nfs_dns_ent *item;
+
+ item = container_of(ref, struct nfs_dns_ent, h.ref);
+ kfree(item->hostname);
+ kfree(item);
+}
+
+static struct cache_head *nfs_dns_ent_alloc(void)
+{
+ struct nfs_dns_ent *item = kmalloc(sizeof(*item), GFP_KERNEL);
+
+ if (item != NULL) {
+ item->hostname = NULL;
+ item->namelen = 0;
+ item->addrlen = 0;
+ return &item->h;
+ }
+ return NULL;
+};
+
+static unsigned int nfs_dns_hash(const struct nfs_dns_ent *key)
+{
+ return hash_str(key->hostname, NFS_DNS_HASHBITS);
+}
+
+static void nfs_dns_request(struct cache_detail *cd,
+ struct cache_head *ch,
+ char **bpp, int *blen)
+{
+ struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h);
+
+ qword_add(bpp, blen, key->hostname);
+ (*bpp)[-1] = '\n';
+}
+
+static int nfs_dns_upcall(struct cache_detail *cd,
+ struct cache_head *ch)
+{
+ struct nfs_dns_ent *key = container_of(ch, struct nfs_dns_ent, h);
+ int ret;
+
+ ret = nfs_cache_upcall(cd, key->hostname);
+ if (ret)
+ ret = sunrpc_cache_pipe_upcall(cd, ch, nfs_dns_request);
+ return ret;
+}
+
+static int nfs_dns_match(struct cache_head *ca,
+ struct cache_head *cb)
+{
+ struct nfs_dns_ent *a;
+ struct nfs_dns_ent *b;
+
+ a = container_of(ca, struct nfs_dns_ent, h);
+ b = container_of(cb, struct nfs_dns_ent, h);
+
+ if (a->namelen == 0 || a->namelen != b->namelen)
+ return 0;
+ return memcmp(a->hostname, b->hostname, a->namelen) == 0;
+}
+
+static int nfs_dns_show(struct seq_file *m, struct cache_detail *cd,
+ struct cache_head *h)
+{
+ struct nfs_dns_ent *item;
+ long ttl;
+
+ if (h == NULL) {
+ seq_puts(m, "# ip address hostname ttl\n");
+ return 0;
+ }
+ item = container_of(h, struct nfs_dns_ent, h);
+ ttl = (long)item->h.expiry_time - (long)get_seconds();
+ if (ttl < 0)
+ ttl = 0;
+
+ if (!test_bit(CACHE_NEGATIVE, &h->flags)) {
+ char buf[INET6_ADDRSTRLEN+IPV6_SCOPE_ID_LEN+1];
+
+ rpc_ntop((struct sockaddr *)&item->addr, buf, sizeof(buf));
+ seq_printf(m, "%15s ", buf);
+ } else
+ seq_puts(m, "<none> ");
+ seq_printf(m, "%15s %ld\n", item->hostname, ttl);
+ return 0;
+}
+
+struct nfs_dns_ent *nfs_dns_lookup(struct cache_detail *cd,
+ struct nfs_dns_ent *key)
+{
+ struct cache_head *ch;
+
+ ch = sunrpc_cache_lookup(cd,
+ &key->h,
+ nfs_dns_hash(key));
+ if (!ch)
+ return NULL;
+ return container_of(ch, struct nfs_dns_ent, h);
+}
+
+struct nfs_dns_ent *nfs_dns_update(struct cache_detail *cd,
+ struct nfs_dns_ent *new,
+ struct nfs_dns_ent *key)
+{
+ struct cache_head *ch;
+
+ ch = sunrpc_cache_update(cd,
+ &new->h, &key->h,
+ nfs_dns_hash(key));
+ if (!ch)
+ return NULL;
+ return container_of(ch, struct nfs_dns_ent, h);
+}
+
+static int nfs_dns_parse(struct cache_detail *cd, char *buf, int buflen)
+{
+ char buf1[NFS_DNS_HOSTNAME_MAXLEN+1];
+ struct nfs_dns_ent key, *item;
+ unsigned long ttl;
+ ssize_t len;
+ int ret = -EINVAL;
+
+ if (buf[buflen-1] != '\n')
+ goto out;
+ buf[buflen-1] = '\0';
+
+ len = qword_get(&buf, buf1, sizeof(buf1));
+ if (len <= 0)
+ goto out;
+ key.addrlen = rpc_pton(buf1, len,
+ (struct sockaddr *)&key.addr,
+ sizeof(key.addr));
+
+ len = qword_get(&buf, buf1, sizeof(buf1));
+ if (len <= 0)
+ goto out;
+
+ key.hostname = buf1;
+ key.namelen = len;
+ memset(&key.h, 0, sizeof(key.h));
+
+ ttl = get_expiry(&buf);
+ if (ttl == 0)
+ goto out;
+ key.h.expiry_time = ttl + get_seconds();
+
+ ret = -ENOMEM;
+ item = nfs_dns_lookup(cd, &key);
+ if (item == NULL)
+ goto out;
+
+ if (key.addrlen == 0)
+ set_bit(CACHE_NEGATIVE, &key.h.flags);
+
+ item = nfs_dns_update(cd, &key, item);
+ if (item == NULL)
+ goto out;
+
+ ret = 0;
+ cache_put(&item->h, cd);
+out:
+ return ret;
+}
+
+static struct cache_detail nfs_dns_resolve = {
+ .owner = THIS_MODULE,
+ .hash_size = NFS_DNS_HASHTBL_SIZE,
+ .hash_table = nfs_dns_table,
+ .name = "dns_resolve",
+ .cache_put = nfs_dns_ent_put,
+ .cache_upcall = nfs_dns_upcall,
+ .cache_parse = nfs_dns_parse,
+ .cache_show = nfs_dns_show,
+ .match = nfs_dns_match,
+ .init = nfs_dns_ent_init,
+ .update = nfs_dns_ent_init,
+ .alloc = nfs_dns_ent_alloc,
+};
+
+static int do_cache_lookup(struct cache_detail *cd,
+ struct nfs_dns_ent *key,
+ struct nfs_dns_ent **item,
+ struct nfs_cache_defer_req *dreq)
+{
+ int ret = -ENOMEM;
+
+ *item = nfs_dns_lookup(cd, key);
+ if (*item) {
+ ret = cache_check(cd, &(*item)->h, &dreq->req);
+ if (ret)
+ *item = NULL;
+ }
+ return ret;
+}
+
+static int do_cache_lookup_nowait(struct cache_detail *cd,
+ struct nfs_dns_ent *key,
+ struct nfs_dns_ent **item)
+{
+ int ret = -ENOMEM;
+
+ *item = nfs_dns_lookup(cd, key);
+ if (!*item)
+ goto out_err;
+ ret = -ETIMEDOUT;
+ if (!test_bit(CACHE_VALID, &(*item)->h.flags)
+ || (*item)->h.expiry_time < get_seconds()
+ || cd->flush_time > (*item)->h.last_refresh)
+ goto out_put;
+ ret = -ENOENT;
+ if (test_bit(CACHE_NEGATIVE, &(*item)->h.flags))
+ goto out_put;
+ return 0;
+out_put:
+ cache_put(&(*item)->h, cd);
+out_err:
+ *item = NULL;
+ return ret;
+}
+
+static int do_cache_lookup_wait(struct cache_detail *cd,
+ struct nfs_dns_ent *key,
+ struct nfs_dns_ent **item)
+{
+ struct nfs_cache_defer_req *dreq;
+ int ret = -ENOMEM;
+
+ dreq = nfs_cache_defer_req_alloc();
+ if (!dreq)
+ goto out;
+ ret = do_cache_lookup(cd, key, item, dreq);
+ if (ret == -EAGAIN) {
+ ret = nfs_cache_wait_for_upcall(dreq);
+ if (!ret)
+ ret = do_cache_lookup_nowait(cd, key, item);
+ }
+ nfs_cache_defer_req_put(dreq);
+out:
+ return ret;
+}
+
+ssize_t nfs_dns_resolve_name(char *name, size_t namelen,
+ struct sockaddr *sa, size_t salen)
+{
+ struct nfs_dns_ent key = {
+ .hostname = name,
+ .namelen = namelen,
+ };
+ struct nfs_dns_ent *item = NULL;
+ ssize_t ret;
+
+ ret = do_cache_lookup_wait(&nfs_dns_resolve, &key, &item);
+ if (ret == 0) {
+ if (salen >= item->addrlen) {
+ memcpy(sa, &item->addr, item->addrlen);
+ ret = item->addrlen;
+ } else
+ ret = -EOVERFLOW;
+ cache_put(&item->h, &nfs_dns_resolve);
+ } else if (ret == -ENOENT)
+ ret = -ESRCH;
+ return ret;
+}
+
+int nfs_dns_resolver_init(void)
+{
+ return nfs_cache_register(&nfs_dns_resolve);
+}
+
+void nfs_dns_resolver_destroy(void)
+{
+ nfs_cache_unregister(&nfs_dns_resolve);
+}
+
diff --git a/fs/nfs/dns_resolve.h b/fs/nfs/dns_resolve.h
new file mode 100644
index 0000000..a3f0938
--- /dev/null
+++ b/fs/nfs/dns_resolve.h
@@ -0,0 +1,14 @@
+/*
+ * Resolve DNS hostnames into valid ip addresses
+ */
+#ifndef __LINUX_FS_NFS_DNS_RESOLVE_H
+#define __LINUX_FS_NFS_DNS_RESOLVE_H
+
+#define NFS_DNS_HOSTNAME_MAXLEN (128)
+
+extern int nfs_dns_resolver_init(void);
+extern void nfs_dns_resolver_destroy(void);
+extern ssize_t nfs_dns_resolve_name(char *name, size_t namelen,
+ struct sockaddr *sa, size_t salen);
+
+#endif
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0055b81..5021b75 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -26,7 +26,6 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include <linux/aio.h>
#include <asm/uaccess.h>
@@ -329,6 +328,42 @@
}
/*
+ * Decide whether a read/modify/write cycle may be more efficient
+ * then a modify/write/read cycle when writing to a page in the
+ * page cache.
+ *
+ * The modify/write/read cycle may occur if a page is read before
+ * being completely filled by the writer. In this situation, the
+ * page must be completely written to stable storage on the server
+ * before it can be refilled by reading in the page from the server.
+ * This can lead to expensive, small, FILE_SYNC mode writes being
+ * done.
+ *
+ * It may be more efficient to read the page first if the file is
+ * open for reading in addition to writing, the page is not marked
+ * as Uptodate, it is not dirty or waiting to be committed,
+ * indicating that it was previously allocated and then modified,
+ * that there were valid bytes of data in that range of the file,
+ * and that the new data won't completely replace the old data in
+ * that range of the file.
+ */
+static int nfs_want_read_modify_write(struct file *file, struct page *page,
+ loff_t pos, unsigned len)
+{
+ unsigned int pglen = nfs_page_length(page);
+ unsigned int offset = pos & (PAGE_CACHE_SIZE - 1);
+ unsigned int end = offset + len;
+
+ if ((file->f_mode & FMODE_READ) && /* open for read? */
+ !PageUptodate(page) && /* Uptodate? */
+ !PagePrivate(page) && /* i/o request already? */
+ pglen && /* valid bytes of file? */
+ (end < pglen || offset)) /* replace all valid bytes? */
+ return 1;
+ return 0;
+}
+
+/*
* This does the "real" work of the write. We must allocate and lock the
* page to be sent back to the generic routine, which then copies the
* data from user space.
@@ -341,15 +376,16 @@
struct page **pagep, void **fsdata)
{
int ret;
- pgoff_t index;
+ pgoff_t index = pos >> PAGE_CACHE_SHIFT;
struct page *page;
- index = pos >> PAGE_CACHE_SHIFT;
+ int once_thru = 0;
dfprintk(PAGECACHE, "NFS: write_begin(%s/%s(%ld), %u@%lld)\n",
file->f_path.dentry->d_parent->d_name.name,
file->f_path.dentry->d_name.name,
mapping->host->i_ino, len, (long long) pos);
+start:
/*
* Prevent starvation issues if someone is doing a consistency
* sync-to-disk
@@ -368,6 +404,13 @@
if (ret) {
unlock_page(page);
page_cache_release(page);
+ } else if (!once_thru &&
+ nfs_want_read_modify_write(file, page, pos, len)) {
+ once_thru = 1;
+ ret = nfs_readpage(file, page);
+ page_cache_release(page);
+ if (!ret)
+ goto start;
}
return ret;
}
@@ -480,6 +523,7 @@
.invalidatepage = nfs_invalidate_page,
.releasepage = nfs_release_page,
.direct_IO = nfs_direct_IO,
+ .migratepage = nfs_migrate_page,
.launder_page = nfs_launder_page,
};
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 46177cb..b35d2a6 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -30,7 +30,6 @@
#include <linux/nfs_idmap.h>
#include <linux/vfs.h>
#include <linux/namei.h>
-#include <linux/mnt_namespace.h>
#include <linux/security.h>
#include <asm/system.h>
diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c
index 86147b0..21a84d45 100644
--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -101,7 +101,7 @@
static unsigned int fnvhash32(const void *, size_t);
-static struct rpc_pipe_ops idmap_upcall_ops = {
+static const struct rpc_pipe_ops idmap_upcall_ops = {
.upcall = idmap_pipe_upcall,
.downcall = idmap_pipe_downcall,
.destroy_msg = idmap_pipe_destroy_msg,
@@ -119,8 +119,8 @@
if (idmap == NULL)
return -ENOMEM;
- idmap->idmap_dentry = rpc_mkpipe(clp->cl_rpcclient->cl_dentry, "idmap",
- idmap, &idmap_upcall_ops, 0);
+ idmap->idmap_dentry = rpc_mkpipe(clp->cl_rpcclient->cl_path.dentry,
+ "idmap", idmap, &idmap_upcall_ops, 0);
if (IS_ERR(idmap->idmap_dentry)) {
error = PTR_ERR(idmap->idmap_dentry);
kfree(idmap);
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 64f87194d..060022b 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -30,7 +30,6 @@
#include <linux/nfs_mount.h>
#include <linux/nfs4_mount.h>
#include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/nfs_idmap.h>
@@ -47,6 +46,7 @@
#include "iostat.h"
#include "internal.h"
#include "fscache.h"
+#include "dns_resolve.h"
#define NFSDBG_FACILITY NFSDBG_VFS
@@ -287,6 +287,11 @@
/* We can't support update_atime(), since the server will reset it */
inode->i_flags |= S_NOATIME|S_NOCMTIME;
inode->i_mode = fattr->mode;
+ if ((fattr->valid & NFS_ATTR_FATTR_MODE) == 0
+ && nfs_server_capable(inode, NFS_CAP_MODE))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
/* Why so? Because we want revalidate for devices/FIFOs, and
* that's precisely what we have in nfs_file_inode_operations.
*/
@@ -331,20 +336,46 @@
nfsi->attr_gencount = fattr->gencount;
if (fattr->valid & NFS_ATTR_FATTR_ATIME)
inode->i_atime = fattr->atime;
+ else if (nfs_server_capable(inode, NFS_CAP_ATIME))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (fattr->valid & NFS_ATTR_FATTR_MTIME)
inode->i_mtime = fattr->mtime;
+ else if (nfs_server_capable(inode, NFS_CAP_MTIME))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA;
if (fattr->valid & NFS_ATTR_FATTR_CTIME)
inode->i_ctime = fattr->ctime;
+ else if (nfs_server_capable(inode, NFS_CAP_CTIME))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
if (fattr->valid & NFS_ATTR_FATTR_CHANGE)
nfsi->change_attr = fattr->change_attr;
+ else if (nfs_server_capable(inode, NFS_CAP_CHANGE_ATTR))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA;
if (fattr->valid & NFS_ATTR_FATTR_SIZE)
inode->i_size = nfs_size_to_loff_t(fattr->size);
+ else
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA
+ | NFS_INO_REVAL_PAGECACHE;
if (fattr->valid & NFS_ATTR_FATTR_NLINK)
inode->i_nlink = fattr->nlink;
+ else if (nfs_server_capable(inode, NFS_CAP_NLINK))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (fattr->valid & NFS_ATTR_FATTR_OWNER)
inode->i_uid = fattr->uid;
+ else if (nfs_server_capable(inode, NFS_CAP_OWNER))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
if (fattr->valid & NFS_ATTR_FATTR_GROUP)
inode->i_gid = fattr->gid;
+ else if (nfs_server_capable(inode, NFS_CAP_OWNER_GROUP))
+ nfsi->cache_validity |= NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL;
if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED)
inode->i_blocks = fattr->du.nfs2.blocks;
if (fattr->valid & NFS_ATTR_FATTR_SPACE_USED) {
@@ -1146,6 +1177,7 @@
loff_t cur_isize, new_isize;
unsigned long invalid = 0;
unsigned long now = jiffies;
+ unsigned long save_cache_validity;
dfprintk(VFS, "NFS: %s(%s/%ld ct=%d info=0x%x)\n",
__func__, inode->i_sb->s_id, inode->i_ino,
@@ -1172,10 +1204,11 @@
*/
nfsi->read_cache_jiffies = fattr->time_start;
- if ((fattr->valid & NFS_ATTR_FATTR_CHANGE) || (fattr->valid & (NFS_ATTR_FATTR_MTIME|NFS_ATTR_FATTR_CTIME)))
- nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR
- | NFS_INO_INVALID_ATIME
- | NFS_INO_REVAL_PAGECACHE);
+ save_cache_validity = nfsi->cache_validity;
+ nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ATIME
+ | NFS_INO_REVAL_FORCED
+ | NFS_INO_REVAL_PAGECACHE);
/* Do atomic weak cache consistency updates */
nfs_wcc_update_inode(inode, fattr);
@@ -1190,7 +1223,8 @@
nfs_force_lookup_revalidate(inode);
nfsi->change_attr = fattr->change_attr;
}
- }
+ } else if (server->caps & NFS_CAP_CHANGE_ATTR)
+ invalid |= save_cache_validity;
if (fattr->valid & NFS_ATTR_FATTR_MTIME) {
/* NFSv2/v3: Check if the mtime agrees */
@@ -1202,7 +1236,12 @@
nfs_force_lookup_revalidate(inode);
memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime));
}
- }
+ } else if (server->caps & NFS_CAP_MTIME)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_DATA
+ | NFS_INO_REVAL_PAGECACHE
+ | NFS_INO_REVAL_FORCED);
+
if (fattr->valid & NFS_ATTR_FATTR_CTIME) {
/* If ctime has changed we should definitely clear access+acl caches */
if (!timespec_equal(&inode->i_ctime, &fattr->ctime)) {
@@ -1216,7 +1255,11 @@
}
memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime));
}
- }
+ } else if (server->caps & NFS_CAP_CTIME)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
/* Check if our cached file size is stale */
if (fattr->valid & NFS_ATTR_FATTR_SIZE) {
@@ -1232,30 +1275,50 @@
dprintk("NFS: isize change on server for file %s/%ld\n",
inode->i_sb->s_id, inode->i_ino);
}
- }
+ } else
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_REVAL_PAGECACHE
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_ATIME)
memcpy(&inode->i_atime, &fattr->atime, sizeof(inode->i_atime));
+ else if (server->caps & NFS_CAP_ATIME)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATIME
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_MODE) {
if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) {
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
inode->i_mode = fattr->mode;
}
- }
+ } else if (server->caps & NFS_CAP_MODE)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
+
if (fattr->valid & NFS_ATTR_FATTR_OWNER) {
if (inode->i_uid != fattr->uid) {
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
inode->i_uid = fattr->uid;
}
- }
+ } else if (server->caps & NFS_CAP_OWNER)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
+
if (fattr->valid & NFS_ATTR_FATTR_GROUP) {
if (inode->i_gid != fattr->gid) {
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
inode->i_gid = fattr->gid;
}
- }
+ } else if (server->caps & NFS_CAP_OWNER_GROUP)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_INVALID_ACCESS
+ | NFS_INO_INVALID_ACL
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_NLINK) {
if (inode->i_nlink != fattr->nlink) {
@@ -1264,7 +1327,9 @@
invalid |= NFS_INO_INVALID_DATA;
inode->i_nlink = fattr->nlink;
}
- }
+ } else if (server->caps & NFS_CAP_NLINK)
+ invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
+ | NFS_INO_REVAL_FORCED);
if (fattr->valid & NFS_ATTR_FATTR_SPACE_USED) {
/*
@@ -1294,9 +1359,8 @@
|| S_ISLNK(inode->i_mode)))
invalid &= ~NFS_INO_INVALID_DATA;
if (!nfs_have_delegation(inode, FMODE_READ) ||
- (nfsi->cache_validity & NFS_INO_REVAL_FORCED))
+ (save_cache_validity & NFS_INO_REVAL_FORCED))
nfsi->cache_validity |= invalid;
- nfsi->cache_validity &= ~NFS_INO_REVAL_FORCED;
return 0;
out_changed:
@@ -1443,6 +1507,10 @@
{
int err;
+ err = nfs_dns_resolver_init();
+ if (err < 0)
+ goto out8;
+
err = nfs_fscache_register();
if (err < 0)
goto out7;
@@ -1501,6 +1569,8 @@
out6:
nfs_fscache_unregister();
out7:
+ nfs_dns_resolver_destroy();
+out8:
return err;
}
@@ -1512,6 +1582,7 @@
nfs_destroy_inodecache();
nfs_destroy_nfspagecache();
nfs_fscache_unregister();
+ nfs_dns_resolver_destroy();
#ifdef CONFIG_PROC_FS
rpc_proc_unregister("nfs");
#endif
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 7dd90a6..2e48567 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -102,6 +102,7 @@
};
extern int nfs_mount(struct nfs_mount_request *info);
+extern void nfs_umount(const struct nfs_mount_request *info);
/* client.c */
extern struct rpc_program nfs_program;
@@ -213,7 +214,6 @@
extern int nfs_wait_bit_killable(void *word);
/* super.c */
-void nfs_parse_ip_address(char *, size_t, struct sockaddr *, size_t *);
extern struct file_system_type nfs_xdev_fs_type;
#ifdef CONFIG_NFS_V4
extern struct file_system_type nfs4_xdev_fs_type;
@@ -248,6 +248,12 @@
/* write.c */
extern void nfs_write_prepare(struct rpc_task *task, void *calldata);
+#ifdef CONFIG_MIGRATION
+extern int nfs_migrate_page(struct address_space *,
+ struct page *, struct page *);
+#else
+#define nfs_migrate_page NULL
+#endif
/* nfs4proc.c */
extern int _nfs4_call_sync(struct nfs_server *server,
@@ -368,24 +374,3 @@
return ((unsigned long)len + (unsigned long)base +
PAGE_SIZE - 1) >> PAGE_SHIFT;
}
-
-#define IPV6_SCOPE_DELIMITER '%'
-
-/*
- * Set the port number in an address. Be agnostic about the address
- * family.
- */
-static inline void nfs_set_port(struct sockaddr *sap, unsigned short port)
-{
- struct sockaddr_in *ap = (struct sockaddr_in *)sap;
- struct sockaddr_in6 *ap6 = (struct sockaddr_in6 *)sap;
-
- switch (sap->sa_family) {
- case AF_INET:
- ap->sin_port = htons(port);
- break;
- case AF_INET6:
- ap6->sin6_port = htons(port);
- break;
- }
-}
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 38ef9ea..0adefc4 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -209,6 +209,71 @@
goto out;
}
+/**
+ * nfs_umount - Notify a server that we have unmounted this export
+ * @info: pointer to umount request arguments
+ *
+ * MOUNTPROC_UMNT is advisory, so we set a short timeout, and always
+ * use UDP.
+ */
+void nfs_umount(const struct nfs_mount_request *info)
+{
+ static const struct rpc_timeout nfs_umnt_timeout = {
+ .to_initval = 1 * HZ,
+ .to_maxval = 3 * HZ,
+ .to_retries = 2,
+ };
+ struct rpc_create_args args = {
+ .protocol = IPPROTO_UDP,
+ .address = info->sap,
+ .addrsize = info->salen,
+ .timeout = &nfs_umnt_timeout,
+ .servername = info->hostname,
+ .program = &mnt_program,
+ .version = info->version,
+ .authflavor = RPC_AUTH_UNIX,
+ .flags = RPC_CLNT_CREATE_NOPING,
+ };
+ struct mountres result;
+ struct rpc_message msg = {
+ .rpc_argp = info->dirpath,
+ .rpc_resp = &result,
+ };
+ struct rpc_clnt *clnt;
+ int status;
+
+ if (info->noresvport)
+ args.flags |= RPC_CLNT_CREATE_NONPRIVPORT;
+
+ clnt = rpc_create(&args);
+ if (unlikely(IS_ERR(clnt)))
+ goto out_clnt_err;
+
+ dprintk("NFS: sending UMNT request for %s:%s\n",
+ (info->hostname ? info->hostname : "server"), info->dirpath);
+
+ if (info->version == NFS_MNT3_VERSION)
+ msg.rpc_proc = &clnt->cl_procinfo[MOUNTPROC3_UMNT];
+ else
+ msg.rpc_proc = &clnt->cl_procinfo[MOUNTPROC_UMNT];
+
+ status = rpc_call_sync(clnt, &msg, 0);
+ rpc_shutdown_client(clnt);
+
+ if (unlikely(status < 0))
+ goto out_call_err;
+
+ return;
+
+out_clnt_err:
+ dprintk("NFS: failed to create UMNT RPC client, status=%ld\n",
+ PTR_ERR(clnt));
+ return;
+
+out_call_err:
+ dprintk("NFS: UMNT request failed, status=%d\n", status);
+}
+
/*
* XDR encode/decode functions for MOUNT
*/
@@ -258,7 +323,7 @@
return -EIO;
status = ntohl(*p);
- for (i = 0; i <= ARRAY_SIZE(mnt_errtbl); i++) {
+ for (i = 0; i < ARRAY_SIZE(mnt_errtbl); i++) {
if (mnt_errtbl[i].status == status) {
res->errno = mnt_errtbl[i].errno;
return 0;
@@ -309,7 +374,7 @@
return -EIO;
status = ntohl(*p);
- for (i = 0; i <= ARRAY_SIZE(mnt3_errtbl); i++) {
+ for (i = 0; i < ARRAY_SIZE(mnt3_errtbl); i++) {
if (mnt3_errtbl[i].status == status) {
res->errno = mnt3_errtbl[i].errno;
return 0;
@@ -407,6 +472,13 @@
.p_statidx = MOUNTPROC_MNT,
.p_name = "MOUNT",
},
+ [MOUNTPROC_UMNT] = {
+ .p_proc = MOUNTPROC_UMNT,
+ .p_encode = (kxdrproc_t)mnt_enc_dirpath,
+ .p_arglen = MNT_enc_dirpath_sz,
+ .p_statidx = MOUNTPROC_UMNT,
+ .p_name = "UMOUNT",
+ },
};
static struct rpc_procinfo mnt3_procedures[] = {
@@ -419,6 +491,13 @@
.p_statidx = MOUNTPROC3_MNT,
.p_name = "MOUNT",
},
+ [MOUNTPROC3_UMNT] = {
+ .p_proc = MOUNTPROC3_UMNT,
+ .p_encode = (kxdrproc_t)mnt_enc_dirpath,
+ .p_arglen = MNT_enc_dirpath_sz,
+ .p_statidx = MOUNTPROC3_UMNT,
+ .p_name = "UMOUNT",
+ },
};
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 61bc3a3..6ea07a3 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -220,6 +220,7 @@
extern struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp);
extern int nfs4_proc_create_session(struct nfs_client *, int reset);
extern int nfs4_proc_destroy_session(struct nfs4_session *);
+extern int nfs4_init_session(struct nfs_server *server);
#else /* CONFIG_NFS_v4_1 */
static inline int nfs4_setup_sequence(struct nfs_client *clp,
struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
@@ -227,6 +228,11 @@
{
return 0;
}
+
+static inline int nfs4_init_session(struct nfs_server *server)
+{
+ return 0;
+}
#endif /* CONFIG_NFS_V4_1 */
extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[];
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 2a2a0a7..2636c26 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -17,6 +17,7 @@
#include <linux/inet.h>
#include "internal.h"
#include "nfs4_fs.h"
+#include "dns_resolve.h"
#define NFSDBG_FACILITY NFSDBG_VFS
@@ -95,6 +96,20 @@
return 0;
}
+static size_t nfs_parse_server_name(char *string, size_t len,
+ struct sockaddr *sa, size_t salen)
+{
+ ssize_t ret;
+
+ ret = rpc_pton(string, len, sa, salen);
+ if (ret == 0) {
+ ret = nfs_dns_resolve_name(string, len, sa, salen);
+ if (ret < 0)
+ ret = 0;
+ }
+ return ret;
+}
+
static struct vfsmount *try_location(struct nfs_clone_mount *mountdata,
char *page, char *page2,
const struct nfs4_fs_location *location)
@@ -121,11 +136,12 @@
if (memchr(buf->data, IPV6_SCOPE_DELIMITER, buf->len))
continue;
- nfs_parse_ip_address(buf->data, buf->len,
- mountdata->addr, &mountdata->addrlen);
- if (mountdata->addr->sa_family == AF_UNSPEC)
+ mountdata->addrlen = nfs_parse_server_name(buf->data,
+ buf->len,
+ mountdata->addr, mountdata->addrlen);
+ if (mountdata->addrlen == 0)
continue;
- nfs_set_port(mountdata->addr, NFS_PORT);
+ rpc_set_port(mountdata->addr, NFS_PORT);
memcpy(page2, buf->data, buf->len);
page2[buf->len] = '\0';
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 92ce435..be6544a 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -45,7 +45,6 @@
#include <linux/nfs4.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/module.h>
@@ -62,6 +61,8 @@
#define NFS4_POLL_RETRY_MIN (HZ/10)
#define NFS4_POLL_RETRY_MAX (15*HZ)
+#define NFS4_MAX_LOOP_ON_RECOVER (10)
+
struct nfs4_opendata;
static int _nfs4_proc_open(struct nfs4_opendata *data);
static int nfs4_do_fsinfo(struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *);
@@ -427,17 +428,19 @@
static int nfs4_recover_session(struct nfs4_session *session)
{
struct nfs_client *clp = session->clp;
+ unsigned int loop;
int ret;
- for (;;) {
+ for (loop = NFS4_MAX_LOOP_ON_RECOVER; loop != 0; loop--) {
ret = nfs4_wait_clnt_recover(clp);
if (ret != 0)
- return ret;
+ break;
if (!test_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state))
break;
nfs4_schedule_state_manager(clp);
+ ret = -EIO;
}
- return 0;
+ return ret;
}
static int nfs41_setup_sequence(struct nfs4_session *session,
@@ -1445,18 +1448,20 @@
static int nfs4_recover_expired_lease(struct nfs_server *server)
{
struct nfs_client *clp = server->nfs_client;
+ unsigned int loop;
int ret;
- for (;;) {
+ for (loop = NFS4_MAX_LOOP_ON_RECOVER; loop != 0; loop--) {
ret = nfs4_wait_clnt_recover(clp);
if (ret != 0)
- return ret;
+ break;
if (!test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state) &&
!test_bit(NFS4CLNT_CHECK_LEASE,&clp->cl_state))
break;
nfs4_schedule_state_recovery(clp);
+ ret = -EIO;
}
- return 0;
+ return ret;
}
/*
@@ -1998,12 +2003,34 @@
status = nfs4_call_sync(server, &msg, &args, &res, 0);
if (status == 0) {
memcpy(server->attr_bitmask, res.attr_bitmask, sizeof(server->attr_bitmask));
+ server->caps &= ~(NFS_CAP_ACLS|NFS_CAP_HARDLINKS|
+ NFS_CAP_SYMLINKS|NFS_CAP_FILEID|
+ NFS_CAP_MODE|NFS_CAP_NLINK|NFS_CAP_OWNER|
+ NFS_CAP_OWNER_GROUP|NFS_CAP_ATIME|
+ NFS_CAP_CTIME|NFS_CAP_MTIME);
if (res.attr_bitmask[0] & FATTR4_WORD0_ACL)
server->caps |= NFS_CAP_ACLS;
if (res.has_links != 0)
server->caps |= NFS_CAP_HARDLINKS;
if (res.has_symlinks != 0)
server->caps |= NFS_CAP_SYMLINKS;
+ if (res.attr_bitmask[0] & FATTR4_WORD0_FILEID)
+ server->caps |= NFS_CAP_FILEID;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_MODE)
+ server->caps |= NFS_CAP_MODE;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_NUMLINKS)
+ server->caps |= NFS_CAP_NLINK;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_OWNER)
+ server->caps |= NFS_CAP_OWNER;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_OWNER_GROUP)
+ server->caps |= NFS_CAP_OWNER_GROUP;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_TIME_ACCESS)
+ server->caps |= NFS_CAP_ATIME;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_TIME_METADATA)
+ server->caps |= NFS_CAP_CTIME;
+ if (res.attr_bitmask[1] & FATTR4_WORD1_TIME_MODIFY)
+ server->caps |= NFS_CAP_MTIME;
+
memcpy(server->cache_consistency_bitmask, res.attr_bitmask, sizeof(server->cache_consistency_bitmask));
server->cache_consistency_bitmask[0] &= FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE;
server->cache_consistency_bitmask[1] &= FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY;
@@ -2041,15 +2068,9 @@
.rpc_argp = &args,
.rpc_resp = &res,
};
- int status;
nfs_fattr_init(info->fattr);
- status = nfs4_recover_expired_lease(server);
- if (!status)
- status = nfs4_check_client_ready(server->nfs_client);
- if (!status)
- status = nfs4_call_sync(server, &msg, &args, &res, 0);
- return status;
+ return nfs4_call_sync(server, &msg, &args, &res, 0);
}
static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
@@ -4100,15 +4121,23 @@
if (request->fl_start < 0 || request->fl_end < 0)
return -EINVAL;
- if (IS_GETLK(cmd))
- return nfs4_proc_getlk(state, F_GETLK, request);
+ if (IS_GETLK(cmd)) {
+ if (state != NULL)
+ return nfs4_proc_getlk(state, F_GETLK, request);
+ return 0;
+ }
if (!(IS_SETLK(cmd) || IS_SETLKW(cmd)))
return -EINVAL;
- if (request->fl_type == F_UNLCK)
- return nfs4_proc_unlck(state, cmd, request);
+ if (request->fl_type == F_UNLCK) {
+ if (state != NULL)
+ return nfs4_proc_unlck(state, cmd, request);
+ return 0;
+ }
+ if (state == NULL)
+ return -ENOLCK;
do {
status = nfs4_proc_setlk(state, cmd, request);
if ((status != -EAGAIN) || IS_SETLK(cmd))
@@ -4794,6 +4823,22 @@
return status;
}
+int nfs4_init_session(struct nfs_server *server)
+{
+ struct nfs_client *clp = server->nfs_client;
+ int ret;
+
+ if (!nfs4_has_session(clp))
+ return 0;
+
+ clp->cl_session->fc_attrs.max_rqst_sz = server->wsize;
+ clp->cl_session->fc_attrs.max_resp_sz = server->rsize;
+ ret = nfs4_recover_expired_lease(server);
+ if (!ret)
+ ret = nfs4_check_client_ready(clp);
+ return ret;
+}
+
/*
* Renew the cl_session lease.
*/
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index b73c5a7..65ca8c1 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -553,6 +553,7 @@
INIT_LIST_HEAD(&lsp->ls_sequence.list);
lsp->ls_seqid.sequence = &lsp->ls_sequence;
atomic_set(&lsp->ls_count, 1);
+ lsp->ls_state = state;
lsp->ls_owner = fl_owner;
spin_lock(&clp->cl_lock);
nfs_alloc_unique_id(&clp->cl_lockowner_id, &lsp->ls_id, 1, 64);
@@ -587,7 +588,6 @@
if (lsp != NULL)
break;
if (new != NULL) {
- new->ls_state = state;
list_add(&new->ls_locks, &state->lock_states);
set_bit(LK_STATE_IN_USE, &state->flags);
lsp = new;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 617273e..cfc30d3 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -702,29 +702,12 @@
u32 minorversion;
};
-/*
- * START OF "GENERIC" ENCODE ROUTINES.
- * These may look a little ugly since they are imported from a "generic"
- * set of XDR encode/decode routines which are intended to be shared by
- * all of our NFSv4 implementations (OpenBSD, MacOS X...).
- *
- * If the pain of reading these is too great, it should be a straightforward
- * task to translate them into Linux-specific versions which are more
- * consistent with the style used in NFSv2/v3...
- */
-#define WRITE32(n) *p++ = htonl(n)
-#define WRITE64(n) do { \
- *p++ = htonl((uint32_t)((n) >> 32)); \
- *p++ = htonl((uint32_t)(n)); \
-} while (0)
-#define WRITEMEM(ptr,nbytes) do { \
- p = xdr_encode_opaque_fixed(p, ptr, nbytes); \
-} while (0)
-
-#define RESERVE_SPACE(nbytes) do { \
- p = xdr_reserve_space(xdr, nbytes); \
- BUG_ON(!p); \
-} while (0)
+static __be32 *reserve_space(struct xdr_stream *xdr, size_t nbytes)
+{
+ __be32 *p = xdr_reserve_space(xdr, nbytes);
+ BUG_ON(!p);
+ return p;
+}
static void encode_string(struct xdr_stream *xdr, unsigned int len, const char *str)
{
@@ -749,12 +732,11 @@
dprintk("encode_compound: tag=%.*s\n", (int)hdr->taglen, hdr->tag);
BUG_ON(hdr->taglen > NFS4_MAXTAGLEN);
- RESERVE_SPACE(12+(XDR_QUADLEN(hdr->taglen)<<2));
- WRITE32(hdr->taglen);
- WRITEMEM(hdr->tag, hdr->taglen);
- WRITE32(hdr->minorversion);
+ p = reserve_space(xdr, 4 + hdr->taglen + 8);
+ p = xdr_encode_opaque(p, hdr->tag, hdr->taglen);
+ *p++ = cpu_to_be32(hdr->minorversion);
hdr->nops_p = p;
- WRITE32(hdr->nops);
+ *p = cpu_to_be32(hdr->nops);
}
static void encode_nops(struct compound_hdr *hdr)
@@ -829,55 +811,53 @@
len += 16;
else if (iap->ia_valid & ATTR_MTIME)
len += 4;
- RESERVE_SPACE(len);
+ p = reserve_space(xdr, len);
/*
* We write the bitmap length now, but leave the bitmap and the attribute
* buffer length to be backfilled at the end of this routine.
*/
- WRITE32(2);
+ *p++ = cpu_to_be32(2);
q = p;
p += 3;
if (iap->ia_valid & ATTR_SIZE) {
bmval0 |= FATTR4_WORD0_SIZE;
- WRITE64(iap->ia_size);
+ p = xdr_encode_hyper(p, iap->ia_size);
}
if (iap->ia_valid & ATTR_MODE) {
bmval1 |= FATTR4_WORD1_MODE;
- WRITE32(iap->ia_mode & S_IALLUGO);
+ *p++ = cpu_to_be32(iap->ia_mode & S_IALLUGO);
}
if (iap->ia_valid & ATTR_UID) {
bmval1 |= FATTR4_WORD1_OWNER;
- WRITE32(owner_namelen);
- WRITEMEM(owner_name, owner_namelen);
+ p = xdr_encode_opaque(p, owner_name, owner_namelen);
}
if (iap->ia_valid & ATTR_GID) {
bmval1 |= FATTR4_WORD1_OWNER_GROUP;
- WRITE32(owner_grouplen);
- WRITEMEM(owner_group, owner_grouplen);
+ p = xdr_encode_opaque(p, owner_group, owner_grouplen);
}
if (iap->ia_valid & ATTR_ATIME_SET) {
bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
- WRITE32(NFS4_SET_TO_CLIENT_TIME);
- WRITE32(0);
- WRITE32(iap->ia_mtime.tv_sec);
- WRITE32(iap->ia_mtime.tv_nsec);
+ *p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
+ *p++ = cpu_to_be32(0);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
}
else if (iap->ia_valid & ATTR_ATIME) {
bmval1 |= FATTR4_WORD1_TIME_ACCESS_SET;
- WRITE32(NFS4_SET_TO_SERVER_TIME);
+ *p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
}
if (iap->ia_valid & ATTR_MTIME_SET) {
bmval1 |= FATTR4_WORD1_TIME_MODIFY_SET;
- WRITE32(NFS4_SET_TO_CLIENT_TIME);
- WRITE32(0);
- WRITE32(iap->ia_mtime.tv_sec);
- WRITE32(iap->ia_mtime.tv_nsec);
+ *p++ = cpu_to_be32(NFS4_SET_TO_CLIENT_TIME);
+ *p++ = cpu_to_be32(0);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_sec);
+ *p++ = cpu_to_be32(iap->ia_mtime.tv_nsec);
}
else if (iap->ia_valid & ATTR_MTIME) {
bmval1 |= FATTR4_WORD1_TIME_MODIFY_SET;
- WRITE32(NFS4_SET_TO_SERVER_TIME);
+ *p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
}
/*
@@ -891,7 +871,7 @@
len = (char *)p - (char *)q - 12;
*q++ = htonl(bmval0);
*q++ = htonl(bmval1);
- *q++ = htonl(len);
+ *q = htonl(len);
/* out: */
}
@@ -900,9 +880,9 @@
{
__be32 *p;
- RESERVE_SPACE(8);
- WRITE32(OP_ACCESS);
- WRITE32(access);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(OP_ACCESS);
+ *p = cpu_to_be32(access);
hdr->nops++;
hdr->replen += decode_access_maxsz;
}
@@ -911,10 +891,10 @@
{
__be32 *p;
- RESERVE_SPACE(8+NFS4_STATEID_SIZE);
- WRITE32(OP_CLOSE);
- WRITE32(arg->seqid->sequence->counter);
- WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 8+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_CLOSE);
+ *p++ = cpu_to_be32(arg->seqid->sequence->counter);
+ xdr_encode_opaque_fixed(p, arg->stateid->data, NFS4_STATEID_SIZE);
hdr->nops++;
hdr->replen += decode_close_maxsz;
}
@@ -923,10 +903,10 @@
{
__be32 *p;
- RESERVE_SPACE(16);
- WRITE32(OP_COMMIT);
- WRITE64(args->offset);
- WRITE32(args->count);
+ p = reserve_space(xdr, 16);
+ *p++ = cpu_to_be32(OP_COMMIT);
+ p = xdr_encode_hyper(p, args->offset);
+ *p = cpu_to_be32(args->count);
hdr->nops++;
hdr->replen += decode_commit_maxsz;
}
@@ -935,30 +915,28 @@
{
__be32 *p;
- RESERVE_SPACE(8);
- WRITE32(OP_CREATE);
- WRITE32(create->ftype);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(OP_CREATE);
+ *p = cpu_to_be32(create->ftype);
switch (create->ftype) {
case NF4LNK:
- RESERVE_SPACE(4);
- WRITE32(create->u.symlink.len);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(create->u.symlink.len);
xdr_write_pages(xdr, create->u.symlink.pages, 0, create->u.symlink.len);
break;
case NF4BLK: case NF4CHR:
- RESERVE_SPACE(8);
- WRITE32(create->u.device.specdata1);
- WRITE32(create->u.device.specdata2);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(create->u.device.specdata1);
+ *p = cpu_to_be32(create->u.device.specdata2);
break;
default:
break;
}
- RESERVE_SPACE(4 + create->name->len);
- WRITE32(create->name->len);
- WRITEMEM(create->name->name, create->name->len);
+ encode_string(xdr, create->name->len, create->name->name);
hdr->nops++;
hdr->replen += decode_create_maxsz;
@@ -969,10 +947,10 @@
{
__be32 *p;
- RESERVE_SPACE(12);
- WRITE32(OP_GETATTR);
- WRITE32(1);
- WRITE32(bitmap);
+ p = reserve_space(xdr, 12);
+ *p++ = cpu_to_be32(OP_GETATTR);
+ *p++ = cpu_to_be32(1);
+ *p = cpu_to_be32(bitmap);
hdr->nops++;
hdr->replen += decode_getattr_maxsz;
}
@@ -981,11 +959,11 @@
{
__be32 *p;
- RESERVE_SPACE(16);
- WRITE32(OP_GETATTR);
- WRITE32(2);
- WRITE32(bm0);
- WRITE32(bm1);
+ p = reserve_space(xdr, 16);
+ *p++ = cpu_to_be32(OP_GETATTR);
+ *p++ = cpu_to_be32(2);
+ *p++ = cpu_to_be32(bm0);
+ *p = cpu_to_be32(bm1);
hdr->nops++;
hdr->replen += decode_getattr_maxsz;
}
@@ -1012,8 +990,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_GETFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_GETFH);
hdr->nops++;
hdr->replen += decode_getfh_maxsz;
}
@@ -1022,10 +1000,9 @@
{
__be32 *p;
- RESERVE_SPACE(8 + name->len);
- WRITE32(OP_LINK);
- WRITE32(name->len);
- WRITEMEM(name->name, name->len);
+ p = reserve_space(xdr, 8 + name->len);
+ *p++ = cpu_to_be32(OP_LINK);
+ xdr_encode_opaque(p, name->name, name->len);
hdr->nops++;
hdr->replen += decode_link_maxsz;
}
@@ -1052,27 +1029,27 @@
{
__be32 *p;
- RESERVE_SPACE(32);
- WRITE32(OP_LOCK);
- WRITE32(nfs4_lock_type(args->fl, args->block));
- WRITE32(args->reclaim);
- WRITE64(args->fl->fl_start);
- WRITE64(nfs4_lock_length(args->fl));
- WRITE32(args->new_lock_owner);
+ p = reserve_space(xdr, 32);
+ *p++ = cpu_to_be32(OP_LOCK);
+ *p++ = cpu_to_be32(nfs4_lock_type(args->fl, args->block));
+ *p++ = cpu_to_be32(args->reclaim);
+ p = xdr_encode_hyper(p, args->fl->fl_start);
+ p = xdr_encode_hyper(p, nfs4_lock_length(args->fl));
+ *p = cpu_to_be32(args->new_lock_owner);
if (args->new_lock_owner){
- RESERVE_SPACE(4+NFS4_STATEID_SIZE+32);
- WRITE32(args->open_seqid->sequence->counter);
- WRITEMEM(args->open_stateid->data, NFS4_STATEID_SIZE);
- WRITE32(args->lock_seqid->sequence->counter);
- WRITE64(args->lock_owner.clientid);
- WRITE32(16);
- WRITEMEM("lock id:", 8);
- WRITE64(args->lock_owner.id);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+32);
+ *p++ = cpu_to_be32(args->open_seqid->sequence->counter);
+ p = xdr_encode_opaque_fixed(p, args->open_stateid->data, NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(args->lock_seqid->sequence->counter);
+ p = xdr_encode_hyper(p, args->lock_owner.clientid);
+ *p++ = cpu_to_be32(16);
+ p = xdr_encode_opaque_fixed(p, "lock id:", 8);
+ xdr_encode_hyper(p, args->lock_owner.id);
}
else {
- RESERVE_SPACE(NFS4_STATEID_SIZE+4);
- WRITEMEM(args->lock_stateid->data, NFS4_STATEID_SIZE);
- WRITE32(args->lock_seqid->sequence->counter);
+ p = reserve_space(xdr, NFS4_STATEID_SIZE+4);
+ p = xdr_encode_opaque_fixed(p, args->lock_stateid->data, NFS4_STATEID_SIZE);
+ *p = cpu_to_be32(args->lock_seqid->sequence->counter);
}
hdr->nops++;
hdr->replen += decode_lock_maxsz;
@@ -1082,15 +1059,15 @@
{
__be32 *p;
- RESERVE_SPACE(52);
- WRITE32(OP_LOCKT);
- WRITE32(nfs4_lock_type(args->fl, 0));
- WRITE64(args->fl->fl_start);
- WRITE64(nfs4_lock_length(args->fl));
- WRITE64(args->lock_owner.clientid);
- WRITE32(16);
- WRITEMEM("lock id:", 8);
- WRITE64(args->lock_owner.id);
+ p = reserve_space(xdr, 52);
+ *p++ = cpu_to_be32(OP_LOCKT);
+ *p++ = cpu_to_be32(nfs4_lock_type(args->fl, 0));
+ p = xdr_encode_hyper(p, args->fl->fl_start);
+ p = xdr_encode_hyper(p, nfs4_lock_length(args->fl));
+ p = xdr_encode_hyper(p, args->lock_owner.clientid);
+ *p++ = cpu_to_be32(16);
+ p = xdr_encode_opaque_fixed(p, "lock id:", 8);
+ xdr_encode_hyper(p, args->lock_owner.id);
hdr->nops++;
hdr->replen += decode_lockt_maxsz;
}
@@ -1099,13 +1076,13 @@
{
__be32 *p;
- RESERVE_SPACE(12+NFS4_STATEID_SIZE+16);
- WRITE32(OP_LOCKU);
- WRITE32(nfs4_lock_type(args->fl, 0));
- WRITE32(args->seqid->sequence->counter);
- WRITEMEM(args->stateid->data, NFS4_STATEID_SIZE);
- WRITE64(args->fl->fl_start);
- WRITE64(nfs4_lock_length(args->fl));
+ p = reserve_space(xdr, 12+NFS4_STATEID_SIZE+16);
+ *p++ = cpu_to_be32(OP_LOCKU);
+ *p++ = cpu_to_be32(nfs4_lock_type(args->fl, 0));
+ *p++ = cpu_to_be32(args->seqid->sequence->counter);
+ p = xdr_encode_opaque_fixed(p, args->stateid->data, NFS4_STATEID_SIZE);
+ p = xdr_encode_hyper(p, args->fl->fl_start);
+ xdr_encode_hyper(p, nfs4_lock_length(args->fl));
hdr->nops++;
hdr->replen += decode_locku_maxsz;
}
@@ -1115,10 +1092,9 @@
int len = name->len;
__be32 *p;
- RESERVE_SPACE(8 + len);
- WRITE32(OP_LOOKUP);
- WRITE32(len);
- WRITEMEM(name->name, len);
+ p = reserve_space(xdr, 8 + len);
+ *p++ = cpu_to_be32(OP_LOOKUP);
+ xdr_encode_opaque(p, name->name, len);
hdr->nops++;
hdr->replen += decode_lookup_maxsz;
}
@@ -1127,21 +1103,21 @@
{
__be32 *p;
- RESERVE_SPACE(8);
+ p = reserve_space(xdr, 8);
switch (fmode & (FMODE_READ|FMODE_WRITE)) {
case FMODE_READ:
- WRITE32(NFS4_SHARE_ACCESS_READ);
+ *p++ = cpu_to_be32(NFS4_SHARE_ACCESS_READ);
break;
case FMODE_WRITE:
- WRITE32(NFS4_SHARE_ACCESS_WRITE);
+ *p++ = cpu_to_be32(NFS4_SHARE_ACCESS_WRITE);
break;
case FMODE_READ|FMODE_WRITE:
- WRITE32(NFS4_SHARE_ACCESS_BOTH);
+ *p++ = cpu_to_be32(NFS4_SHARE_ACCESS_BOTH);
break;
default:
- WRITE32(0);
+ *p++ = cpu_to_be32(0);
}
- WRITE32(0); /* for linux, share_deny = 0 always */
+ *p = cpu_to_be32(0); /* for linux, share_deny = 0 always */
}
static inline void encode_openhdr(struct xdr_stream *xdr, const struct nfs_openargs *arg)
@@ -1151,29 +1127,29 @@
* opcode 4, seqid 4, share_access 4, share_deny 4, clientid 8, ownerlen 4,
* owner 4 = 32
*/
- RESERVE_SPACE(8);
- WRITE32(OP_OPEN);
- WRITE32(arg->seqid->sequence->counter);
+ p = reserve_space(xdr, 8);
+ *p++ = cpu_to_be32(OP_OPEN);
+ *p = cpu_to_be32(arg->seqid->sequence->counter);
encode_share_access(xdr, arg->fmode);
- RESERVE_SPACE(28);
- WRITE64(arg->clientid);
- WRITE32(16);
- WRITEMEM("open id:", 8);
- WRITE64(arg->id);
+ p = reserve_space(xdr, 28);
+ p = xdr_encode_hyper(p, arg->clientid);
+ *p++ = cpu_to_be32(16);
+ p = xdr_encode_opaque_fixed(p, "open id:", 8);
+ xdr_encode_hyper(p, arg->id);
}
static inline void encode_createmode(struct xdr_stream *xdr, const struct nfs_openargs *arg)
{
__be32 *p;
- RESERVE_SPACE(4);
+ p = reserve_space(xdr, 4);
switch(arg->open_flags & O_EXCL) {
case 0:
- WRITE32(NFS4_CREATE_UNCHECKED);
+ *p = cpu_to_be32(NFS4_CREATE_UNCHECKED);
encode_attrs(xdr, arg->u.attrs, arg->server);
break;
default:
- WRITE32(NFS4_CREATE_EXCLUSIVE);
+ *p = cpu_to_be32(NFS4_CREATE_EXCLUSIVE);
encode_nfs4_verifier(xdr, &arg->u.verifier);
}
}
@@ -1182,14 +1158,14 @@
{
__be32 *p;
- RESERVE_SPACE(4);
+ p = reserve_space(xdr, 4);
switch (arg->open_flags & O_CREAT) {
case 0:
- WRITE32(NFS4_OPEN_NOCREATE);
+ *p = cpu_to_be32(NFS4_OPEN_NOCREATE);
break;
default:
BUG_ON(arg->claim != NFS4_OPEN_CLAIM_NULL);
- WRITE32(NFS4_OPEN_CREATE);
+ *p = cpu_to_be32(NFS4_OPEN_CREATE);
encode_createmode(xdr, arg);
}
}
@@ -1198,16 +1174,16 @@
{
__be32 *p;
- RESERVE_SPACE(4);
+ p = reserve_space(xdr, 4);
switch (delegation_type) {
case 0:
- WRITE32(NFS4_OPEN_DELEGATE_NONE);
+ *p = cpu_to_be32(NFS4_OPEN_DELEGATE_NONE);
break;
case FMODE_READ:
- WRITE32(NFS4_OPEN_DELEGATE_READ);
+ *p = cpu_to_be32(NFS4_OPEN_DELEGATE_READ);
break;
case FMODE_WRITE|FMODE_READ:
- WRITE32(NFS4_OPEN_DELEGATE_WRITE);
+ *p = cpu_to_be32(NFS4_OPEN_DELEGATE_WRITE);
break;
default:
BUG();
@@ -1218,8 +1194,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(NFS4_OPEN_CLAIM_NULL);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(NFS4_OPEN_CLAIM_NULL);
encode_string(xdr, name->len, name->name);
}
@@ -1227,8 +1203,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(NFS4_OPEN_CLAIM_PREVIOUS);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(NFS4_OPEN_CLAIM_PREVIOUS);
encode_delegation_type(xdr, type);
}
@@ -1236,9 +1212,9 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
- WRITE32(NFS4_OPEN_CLAIM_DELEGATE_CUR);
- WRITEMEM(stateid->data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(NFS4_OPEN_CLAIM_DELEGATE_CUR);
+ xdr_encode_opaque_fixed(p, stateid->data, NFS4_STATEID_SIZE);
encode_string(xdr, name->len, name->name);
}
@@ -1267,10 +1243,10 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE+4);
- WRITE32(OP_OPEN_CONFIRM);
- WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
- WRITE32(arg->seqid->sequence->counter);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+4);
+ *p++ = cpu_to_be32(OP_OPEN_CONFIRM);
+ p = xdr_encode_opaque_fixed(p, arg->stateid->data, NFS4_STATEID_SIZE);
+ *p = cpu_to_be32(arg->seqid->sequence->counter);
hdr->nops++;
hdr->replen += decode_open_confirm_maxsz;
}
@@ -1279,10 +1255,10 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE+4);
- WRITE32(OP_OPEN_DOWNGRADE);
- WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE);
- WRITE32(arg->seqid->sequence->counter);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+4);
+ *p++ = cpu_to_be32(OP_OPEN_DOWNGRADE);
+ p = xdr_encode_opaque_fixed(p, arg->stateid->data, NFS4_STATEID_SIZE);
+ *p = cpu_to_be32(arg->seqid->sequence->counter);
encode_share_access(xdr, arg->fmode);
hdr->nops++;
hdr->replen += decode_open_downgrade_maxsz;
@@ -1294,10 +1270,9 @@
int len = fh->size;
__be32 *p;
- RESERVE_SPACE(8 + len);
- WRITE32(OP_PUTFH);
- WRITE32(len);
- WRITEMEM(fh->data, len);
+ p = reserve_space(xdr, 8 + len);
+ *p++ = cpu_to_be32(OP_PUTFH);
+ xdr_encode_opaque(p, fh->data, len);
hdr->nops++;
hdr->replen += decode_putfh_maxsz;
}
@@ -1306,8 +1281,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_PUTROOTFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_PUTROOTFH);
hdr->nops++;
hdr->replen += decode_putrootfh_maxsz;
}
@@ -1317,26 +1292,26 @@
nfs4_stateid stateid;
__be32 *p;
- RESERVE_SPACE(NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, NFS4_STATEID_SIZE);
if (ctx->state != NULL) {
nfs4_copy_stateid(&stateid, ctx->state, ctx->lockowner);
- WRITEMEM(stateid.data, NFS4_STATEID_SIZE);
+ xdr_encode_opaque_fixed(p, stateid.data, NFS4_STATEID_SIZE);
} else
- WRITEMEM(zero_stateid.data, NFS4_STATEID_SIZE);
+ xdr_encode_opaque_fixed(p, zero_stateid.data, NFS4_STATEID_SIZE);
}
static void encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args, struct compound_hdr *hdr)
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_READ);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_READ);
encode_stateid(xdr, args->context);
- RESERVE_SPACE(12);
- WRITE64(args->offset);
- WRITE32(args->count);
+ p = reserve_space(xdr, 12);
+ p = xdr_encode_hyper(p, args->offset);
+ *p = cpu_to_be32(args->count);
hdr->nops++;
hdr->replen += decode_read_maxsz;
}
@@ -1349,20 +1324,20 @@
};
__be32 *p;
- RESERVE_SPACE(12+NFS4_VERIFIER_SIZE+20);
- WRITE32(OP_READDIR);
- WRITE64(readdir->cookie);
- WRITEMEM(readdir->verifier.data, NFS4_VERIFIER_SIZE);
- WRITE32(readdir->count >> 1); /* We're not doing readdirplus */
- WRITE32(readdir->count);
- WRITE32(2);
+ p = reserve_space(xdr, 12+NFS4_VERIFIER_SIZE+20);
+ *p++ = cpu_to_be32(OP_READDIR);
+ p = xdr_encode_hyper(p, readdir->cookie);
+ p = xdr_encode_opaque_fixed(p, readdir->verifier.data, NFS4_VERIFIER_SIZE);
+ *p++ = cpu_to_be32(readdir->count >> 1); /* We're not doing readdirplus */
+ *p++ = cpu_to_be32(readdir->count);
+ *p++ = cpu_to_be32(2);
/* Switch to mounted_on_fileid if the server supports it */
if (readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)
attrs[0] &= ~FATTR4_WORD0_FILEID;
else
attrs[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
- WRITE32(attrs[0] & readdir->bitmask[0]);
- WRITE32(attrs[1] & readdir->bitmask[1]);
+ *p++ = cpu_to_be32(attrs[0] & readdir->bitmask[0]);
+ *p = cpu_to_be32(attrs[1] & readdir->bitmask[1]);
hdr->nops++;
hdr->replen += decode_readdir_maxsz;
dprintk("%s: cookie = %Lu, verifier = %08x:%08x, bitmap = %08x:%08x\n",
@@ -1378,8 +1353,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_READLINK);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_READLINK);
hdr->nops++;
hdr->replen += decode_readlink_maxsz;
}
@@ -1388,10 +1363,9 @@
{
__be32 *p;
- RESERVE_SPACE(8 + name->len);
- WRITE32(OP_REMOVE);
- WRITE32(name->len);
- WRITEMEM(name->name, name->len);
+ p = reserve_space(xdr, 8 + name->len);
+ *p++ = cpu_to_be32(OP_REMOVE);
+ xdr_encode_opaque(p, name->name, name->len);
hdr->nops++;
hdr->replen += decode_remove_maxsz;
}
@@ -1400,14 +1374,10 @@
{
__be32 *p;
- RESERVE_SPACE(8 + oldname->len);
- WRITE32(OP_RENAME);
- WRITE32(oldname->len);
- WRITEMEM(oldname->name, oldname->len);
-
- RESERVE_SPACE(4 + newname->len);
- WRITE32(newname->len);
- WRITEMEM(newname->name, newname->len);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_RENAME);
+ encode_string(xdr, oldname->len, oldname->name);
+ encode_string(xdr, newname->len, newname->name);
hdr->nops++;
hdr->replen += decode_rename_maxsz;
}
@@ -1416,9 +1386,9 @@
{
__be32 *p;
- RESERVE_SPACE(12);
- WRITE32(OP_RENEW);
- WRITE64(client_stateid->cl_clientid);
+ p = reserve_space(xdr, 12);
+ *p++ = cpu_to_be32(OP_RENEW);
+ xdr_encode_hyper(p, client_stateid->cl_clientid);
hdr->nops++;
hdr->replen += decode_renew_maxsz;
}
@@ -1428,8 +1398,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_RESTOREFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_RESTOREFH);
hdr->nops++;
hdr->replen += decode_restorefh_maxsz;
}
@@ -1439,16 +1409,16 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
- WRITE32(OP_SETATTR);
- WRITEMEM(zero_stateid.data, NFS4_STATEID_SIZE);
- RESERVE_SPACE(2*4);
- WRITE32(1);
- WRITE32(FATTR4_WORD0_ACL);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_SETATTR);
+ xdr_encode_opaque_fixed(p, zero_stateid.data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 2*4);
+ *p++ = cpu_to_be32(1);
+ *p = cpu_to_be32(FATTR4_WORD0_ACL);
if (arg->acl_len % 4)
return -EINVAL;
- RESERVE_SPACE(4);
- WRITE32(arg->acl_len);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(arg->acl_len);
xdr_write_pages(xdr, arg->acl_pages, arg->acl_pgbase, arg->acl_len);
hdr->nops++;
hdr->replen += decode_setacl_maxsz;
@@ -1460,8 +1430,8 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_SAVEFH);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_SAVEFH);
hdr->nops++;
hdr->replen += decode_savefh_maxsz;
}
@@ -1470,9 +1440,9 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
- WRITE32(OP_SETATTR);
- WRITEMEM(arg->stateid.data, NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_SETATTR);
+ xdr_encode_opaque_fixed(p, arg->stateid.data, NFS4_STATEID_SIZE);
hdr->nops++;
hdr->replen += decode_setattr_maxsz;
encode_attrs(xdr, arg->iap, server);
@@ -1482,17 +1452,17 @@
{
__be32 *p;
- RESERVE_SPACE(4 + NFS4_VERIFIER_SIZE);
- WRITE32(OP_SETCLIENTID);
- WRITEMEM(setclientid->sc_verifier->data, NFS4_VERIFIER_SIZE);
+ p = reserve_space(xdr, 4 + NFS4_VERIFIER_SIZE);
+ *p++ = cpu_to_be32(OP_SETCLIENTID);
+ xdr_encode_opaque_fixed(p, setclientid->sc_verifier->data, NFS4_VERIFIER_SIZE);
encode_string(xdr, setclientid->sc_name_len, setclientid->sc_name);
- RESERVE_SPACE(4);
- WRITE32(setclientid->sc_prog);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(setclientid->sc_prog);
encode_string(xdr, setclientid->sc_netid_len, setclientid->sc_netid);
encode_string(xdr, setclientid->sc_uaddr_len, setclientid->sc_uaddr);
- RESERVE_SPACE(4);
- WRITE32(setclientid->sc_cb_ident);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(setclientid->sc_cb_ident);
hdr->nops++;
hdr->replen += decode_setclientid_maxsz;
}
@@ -1501,10 +1471,10 @@
{
__be32 *p;
- RESERVE_SPACE(12 + NFS4_VERIFIER_SIZE);
- WRITE32(OP_SETCLIENTID_CONFIRM);
- WRITE64(client_state->cl_clientid);
- WRITEMEM(client_state->cl_confirm.data, NFS4_VERIFIER_SIZE);
+ p = reserve_space(xdr, 12 + NFS4_VERIFIER_SIZE);
+ *p++ = cpu_to_be32(OP_SETCLIENTID_CONFIRM);
+ p = xdr_encode_hyper(p, client_state->cl_clientid);
+ xdr_encode_opaque_fixed(p, client_state->cl_confirm.data, NFS4_VERIFIER_SIZE);
hdr->nops++;
hdr->replen += decode_setclientid_confirm_maxsz;
}
@@ -1513,15 +1483,15 @@
{
__be32 *p;
- RESERVE_SPACE(4);
- WRITE32(OP_WRITE);
+ p = reserve_space(xdr, 4);
+ *p = cpu_to_be32(OP_WRITE);
encode_stateid(xdr, args->context);
- RESERVE_SPACE(16);
- WRITE64(args->offset);
- WRITE32(args->stable);
- WRITE32(args->count);
+ p = reserve_space(xdr, 16);
+ p = xdr_encode_hyper(p, args->offset);
+ *p++ = cpu_to_be32(args->stable);
+ *p = cpu_to_be32(args->count);
xdr_write_pages(xdr, args->pages, args->pgbase, args->count);
hdr->nops++;
@@ -1532,10 +1502,10 @@
{
__be32 *p;
- RESERVE_SPACE(4+NFS4_STATEID_SIZE);
+ p = reserve_space(xdr, 4+NFS4_STATEID_SIZE);
- WRITE32(OP_DELEGRETURN);
- WRITEMEM(stateid->data, NFS4_STATEID_SIZE);
+ *p++ = cpu_to_be32(OP_DELEGRETURN);
+ xdr_encode_opaque_fixed(p, stateid->data, NFS4_STATEID_SIZE);
hdr->nops++;
hdr->replen += decode_delegreturn_maxsz;
}
@@ -1548,16 +1518,16 @@
{
__be32 *p;
- RESERVE_SPACE(4 + sizeof(args->verifier->data));
- WRITE32(OP_EXCHANGE_ID);
- WRITEMEM(args->verifier->data, sizeof(args->verifier->data));
+ p = reserve_space(xdr, 4 + sizeof(args->verifier->data));
+ *p++ = cpu_to_be32(OP_EXCHANGE_ID);
+ xdr_encode_opaque_fixed(p, args->verifier->data, sizeof(args->verifier->data));
encode_string(xdr, args->id_len, args->id);
- RESERVE_SPACE(12);
- WRITE32(args->flags);
- WRITE32(0); /* zero length state_protect4_a */
- WRITE32(0); /* zero length implementation id array */
+ p = reserve_space(xdr, 12);
+ *p++ = cpu_to_be32(args->flags);
+ *p++ = cpu_to_be32(0); /* zero length state_protect4_a */
+ *p = cpu_to_be32(0); /* zero length implementation id array */
hdr->nops++;
hdr->replen += decode_exchange_id_maxsz;
}
@@ -1571,55 +1541,43 @@
uint32_t len;
struct nfs_client *clp = args->client;
- RESERVE_SPACE(4);
- WRITE32(OP_CREATE_SESSION);
-
- RESERVE_SPACE(8);
- WRITE64(clp->cl_ex_clid);
-
- RESERVE_SPACE(8);
- WRITE32(clp->cl_seqid); /*Sequence id */
- WRITE32(args->flags); /*flags */
-
- RESERVE_SPACE(2*28); /* 2 channel_attrs */
- /* Fore Channel */
- WRITE32(args->fc_attrs.headerpadsz); /* header padding size */
- WRITE32(args->fc_attrs.max_rqst_sz); /* max req size */
- WRITE32(args->fc_attrs.max_resp_sz); /* max resp size */
- WRITE32(args->fc_attrs.max_resp_sz_cached); /* Max resp sz cached */
- WRITE32(args->fc_attrs.max_ops); /* max operations */
- WRITE32(args->fc_attrs.max_reqs); /* max requests */
- WRITE32(0); /* rdmachannel_attrs */
-
- /* Back Channel */
- WRITE32(args->fc_attrs.headerpadsz); /* header padding size */
- WRITE32(args->bc_attrs.max_rqst_sz); /* max req size */
- WRITE32(args->bc_attrs.max_resp_sz); /* max resp size */
- WRITE32(args->bc_attrs.max_resp_sz_cached); /* Max resp sz cached */
- WRITE32(args->bc_attrs.max_ops); /* max operations */
- WRITE32(args->bc_attrs.max_reqs); /* max requests */
- WRITE32(0); /* rdmachannel_attrs */
-
- RESERVE_SPACE(4);
- WRITE32(args->cb_program); /* cb_program */
-
- RESERVE_SPACE(4); /* # of security flavors */
- WRITE32(1);
-
- RESERVE_SPACE(4);
- WRITE32(RPC_AUTH_UNIX); /* auth_sys */
-
- /* authsys_parms rfc1831 */
- RESERVE_SPACE(4);
- WRITE32((u32)clp->cl_boot_time.tv_nsec); /* stamp */
len = scnprintf(machine_name, sizeof(machine_name), "%s",
clp->cl_ipaddr);
- RESERVE_SPACE(16 + len);
- WRITE32(len);
- WRITEMEM(machine_name, len);
- WRITE32(0); /* UID */
- WRITE32(0); /* GID */
- WRITE32(0); /* No more gids */
+
+ p = reserve_space(xdr, 20 + 2*28 + 20 + len + 12);
+ *p++ = cpu_to_be32(OP_CREATE_SESSION);
+ p = xdr_encode_hyper(p, clp->cl_ex_clid);
+ *p++ = cpu_to_be32(clp->cl_seqid); /*Sequence id */
+ *p++ = cpu_to_be32(args->flags); /*flags */
+
+ /* Fore Channel */
+ *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */
+ *p++ = cpu_to_be32(args->fc_attrs.max_rqst_sz); /* max req size */
+ *p++ = cpu_to_be32(args->fc_attrs.max_resp_sz); /* max resp size */
+ *p++ = cpu_to_be32(args->fc_attrs.max_resp_sz_cached); /* Max resp sz cached */
+ *p++ = cpu_to_be32(args->fc_attrs.max_ops); /* max operations */
+ *p++ = cpu_to_be32(args->fc_attrs.max_reqs); /* max requests */
+ *p++ = cpu_to_be32(0); /* rdmachannel_attrs */
+
+ /* Back Channel */
+ *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */
+ *p++ = cpu_to_be32(args->bc_attrs.max_rqst_sz); /* max req size */
+ *p++ = cpu_to_be32(args->bc_attrs.max_resp_sz); /* max resp size */
+ *p++ = cpu_to_be32(args->bc_attrs.max_resp_sz_cached); /* Max resp sz cached */
+ *p++ = cpu_to_be32(args->bc_attrs.max_ops); /* max operations */
+ *p++ = cpu_to_be32(args->bc_attrs.max_reqs); /* max requests */
+ *p++ = cpu_to_be32(0); /* rdmachannel_attrs */
+
+ *p++ = cpu_to_be32(args->cb_program); /* cb_program */
+ *p++ = cpu_to_be32(1);
+ *p++ = cpu_to_be32(RPC_AUTH_UNIX); /* auth_sys */
+
+ /* authsys_parms rfc1831 */
+ *p++ = cpu_to_be32((u32)clp->cl_boot_time.tv_nsec); /* stamp */
+ p = xdr_encode_opaque(p, machine_name, len);
+ *p++ = cpu_to_be32(0); /* UID */
+ *p++ = cpu_to_be32(0); /* GID */
+ *p = cpu_to_be32(0); /* No more gids */
hdr->nops++;
hdr->replen += decode_create_session_maxsz;
}
@@ -1629,9 +1587,9 @@
struct compound_hdr *hdr)
{
__be32 *p;
- RESERVE_SPACE(4 + NFS4_MAX_SESSIONID_LEN);
- WRITE32(OP_DESTROY_SESSION);
- WRITEMEM(session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
+ p = reserve_space(xdr, 4 + NFS4_MAX_SESSIONID_LEN);
+ *p++ = cpu_to_be32(OP_DESTROY_SESSION);
+ xdr_encode_opaque_fixed(p, session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
hdr->nops++;
hdr->replen += decode_destroy_session_maxsz;
}
@@ -1655,8 +1613,8 @@
WARN_ON(args->sa_slotid == NFS4_MAX_SLOT_TABLE);
slot = tp->slots + args->sa_slotid;
- RESERVE_SPACE(4);
- WRITE32(OP_SEQUENCE);
+ p = reserve_space(xdr, 4 + NFS4_MAX_SESSIONID_LEN + 16);
+ *p++ = cpu_to_be32(OP_SEQUENCE);
/*
* Sessionid + seqid + slotid + max slotid + cache_this
@@ -1670,12 +1628,11 @@
((u32 *)session->sess_id.data)[3],
slot->seq_nr, args->sa_slotid,
tp->highest_used_slotid, args->sa_cache_this);
- RESERVE_SPACE(NFS4_MAX_SESSIONID_LEN + 16);
- WRITEMEM(session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
- WRITE32(slot->seq_nr);
- WRITE32(args->sa_slotid);
- WRITE32(tp->highest_used_slotid);
- WRITE32(args->sa_cache_this);
+ p = xdr_encode_opaque_fixed(p, session->sess_id.data, NFS4_MAX_SESSIONID_LEN);
+ *p++ = cpu_to_be32(slot->seq_nr);
+ *p++ = cpu_to_be32(args->sa_slotid);
+ *p++ = cpu_to_be32(tp->highest_used_slotid);
+ *p = cpu_to_be32(args->sa_cache_this);
hdr->nops++;
hdr->replen += decode_sequence_maxsz;
#endif /* CONFIG_NFS_V4_1 */
@@ -2466,68 +2423,53 @@
}
#endif /* CONFIG_NFS_V4_1 */
-/*
- * START OF "GENERIC" DECODE ROUTINES.
- * These may look a little ugly since they are imported from a "generic"
- * set of XDR encode/decode routines which are intended to be shared by
- * all of our NFSv4 implementations (OpenBSD, MacOS X...).
- *
- * If the pain of reading these is too great, it should be a straightforward
- * task to translate them into Linux-specific versions which are more
- * consistent with the style used in NFSv2/v3...
- */
-#define READ32(x) (x) = ntohl(*p++)
-#define READ64(x) do { \
- (x) = (u64)ntohl(*p++) << 32; \
- (x) |= ntohl(*p++); \
-} while (0)
-#define READTIME(x) do { \
- p++; \
- (x.tv_sec) = ntohl(*p++); \
- (x.tv_nsec) = ntohl(*p++); \
-} while (0)
-#define COPYMEM(x,nbytes) do { \
- memcpy((x), p, nbytes); \
- p += XDR_QUADLEN(nbytes); \
-} while (0)
-
-#define READ_BUF(nbytes) do { \
- p = xdr_inline_decode(xdr, nbytes); \
- if (unlikely(!p)) { \
- dprintk("nfs: %s: prematurely hit end of receive" \
- " buffer\n", __func__); \
- dprintk("nfs: %s: xdr->p=%p, bytes=%u, xdr->end=%p\n", \
- __func__, xdr->p, nbytes, xdr->end); \
- return -EIO; \
- } \
-} while (0)
+static void print_overflow_msg(const char *func, const struct xdr_stream *xdr)
+{
+ dprintk("nfs: %s: prematurely hit end of receive buffer. "
+ "Remaining buffer length is %tu words.\n",
+ func, xdr->end - xdr->p);
+}
static int decode_opaque_inline(struct xdr_stream *xdr, unsigned int *len, char **string)
{
__be32 *p;
- READ_BUF(4);
- READ32(*len);
- READ_BUF(*len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, *len);
+ if (unlikely(!p))
+ goto out_overflow;
*string = (char *)p;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_compound_hdr(struct xdr_stream *xdr, struct compound_hdr *hdr)
{
__be32 *p;
- READ_BUF(8);
- READ32(hdr->status);
- READ32(hdr->taglen);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ hdr->status = be32_to_cpup(p++);
+ hdr->taglen = be32_to_cpup(p);
- READ_BUF(hdr->taglen + 4);
+ p = xdr_inline_decode(xdr, hdr->taglen + 4);
+ if (unlikely(!p))
+ goto out_overflow;
hdr->tag = (char *)p;
p += XDR_QUADLEN(hdr->taglen);
- READ32(hdr->nops);
+ hdr->nops = be32_to_cpup(p);
if (unlikely(hdr->nops < 1))
return nfs4_stat_to_errno(hdr->status);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
@@ -2536,18 +2478,23 @@
uint32_t opnum;
int32_t nfserr;
- READ_BUF(8);
- READ32(opnum);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ opnum = be32_to_cpup(p++);
if (opnum != expected) {
dprintk("nfs: Server returned operation"
" %d but we issued a request for %d\n",
opnum, expected);
return -EIO;
}
- READ32(nfserr);
+ nfserr = be32_to_cpup(p);
if (nfserr != NFS_OK)
return nfs4_stat_to_errno(nfserr);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
/* Dummy routine */
@@ -2557,8 +2504,11 @@
unsigned int strlen;
char *str;
- READ_BUF(12);
- return decode_opaque_inline(xdr, &strlen, &str);
+ p = xdr_inline_decode(xdr, 12);
+ if (likely(p))
+ return decode_opaque_inline(xdr, &strlen, &str);
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_bitmap(struct xdr_stream *xdr, uint32_t *bitmap)
@@ -2566,27 +2516,39 @@
uint32_t bmlen;
__be32 *p;
- READ_BUF(4);
- READ32(bmlen);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ bmlen = be32_to_cpup(p);
bitmap[0] = bitmap[1] = 0;
- READ_BUF((bmlen << 2));
+ p = xdr_inline_decode(xdr, (bmlen << 2));
+ if (unlikely(!p))
+ goto out_overflow;
if (bmlen > 0) {
- READ32(bitmap[0]);
+ bitmap[0] = be32_to_cpup(p++);
if (bmlen > 1)
- READ32(bitmap[1]);
+ bitmap[1] = be32_to_cpup(p);
}
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static inline int decode_attr_length(struct xdr_stream *xdr, uint32_t *attrlen, __be32 **savep)
{
__be32 *p;
- READ_BUF(4);
- READ32(*attrlen);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *attrlen = be32_to_cpup(p);
*savep = xdr->p;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_supported(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *bitmask)
@@ -2609,8 +2571,10 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_TYPE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_TYPE)) {
- READ_BUF(4);
- READ32(*type);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *type = be32_to_cpup(p);
if (*type < NF4REG || *type > NF4NAMEDATTR) {
dprintk("%s: bad type %d\n", __func__, *type);
return -EIO;
@@ -2620,6 +2584,9 @@
}
dprintk("%s: type=0%o\n", __func__, nfs_type2fmt[*type]);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_change(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *change)
@@ -2631,14 +2598,19 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_CHANGE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_CHANGE)) {
- READ_BUF(8);
- READ64(*change);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, change);
bitmap[0] &= ~FATTR4_WORD0_CHANGE;
ret = NFS_ATTR_FATTR_CHANGE;
}
dprintk("%s: change attribute=%Lu\n", __func__,
(unsigned long long)*change);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_size(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *size)
@@ -2650,13 +2622,18 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_SIZE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_SIZE)) {
- READ_BUF(8);
- READ64(*size);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, size);
bitmap[0] &= ~FATTR4_WORD0_SIZE;
ret = NFS_ATTR_FATTR_SIZE;
}
dprintk("%s: file size=%Lu\n", __func__, (unsigned long long)*size);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_link_support(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2667,12 +2644,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_LINK_SUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_LINK_SUPPORT)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_LINK_SUPPORT;
}
dprintk("%s: link support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_symlink_support(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2683,12 +2665,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_SYMLINK_SUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_SYMLINK_SUPPORT)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_SYMLINK_SUPPORT;
}
dprintk("%s: symlink support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_fsid(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_fsid *fsid)
@@ -2701,9 +2688,11 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FSID - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FSID)) {
- READ_BUF(16);
- READ64(fsid->major);
- READ64(fsid->minor);
+ p = xdr_inline_decode(xdr, 16);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &fsid->major);
+ xdr_decode_hyper(p, &fsid->minor);
bitmap[0] &= ~FATTR4_WORD0_FSID;
ret = NFS_ATTR_FATTR_FSID;
}
@@ -2711,6 +2700,9 @@
(unsigned long long)fsid->major,
(unsigned long long)fsid->minor);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_lease_time(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2721,12 +2713,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_LEASE_TIME - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_LEASE_TIME)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_LEASE_TIME;
}
dprintk("%s: file size=%u\n", __func__, (unsigned int)*res);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_aclsupport(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -2737,12 +2734,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_ACLSUPPORT - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_ACLSUPPORT)) {
- READ_BUF(4);
- READ32(*res);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *res = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_ACLSUPPORT;
}
dprintk("%s: ACLs supported=%u\n", __func__, (unsigned int)*res);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_fileid(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *fileid)
@@ -2754,13 +2756,18 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILEID - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILEID)) {
- READ_BUF(8);
- READ64(*fileid);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, fileid);
bitmap[0] &= ~FATTR4_WORD0_FILEID;
ret = NFS_ATTR_FATTR_FILEID;
}
dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_mounted_on_fileid(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *fileid)
@@ -2772,13 +2779,18 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_MOUNTED_ON_FILEID - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)) {
- READ_BUF(8);
- READ64(*fileid);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, fileid);
bitmap[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
ret = NFS_ATTR_FATTR_FILEID;
}
dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_files_avail(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -2790,12 +2802,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILES_AVAIL - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILES_AVAIL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_FILES_AVAIL;
}
dprintk("%s: files avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_files_free(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -2807,12 +2824,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILES_FREE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILES_FREE)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_FILES_FREE;
}
dprintk("%s: files free=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_files_total(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -2824,12 +2846,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_FILES_TOTAL - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_FILES_TOTAL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_FILES_TOTAL;
}
dprintk("%s: files total=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_pathname(struct xdr_stream *xdr, struct nfs4_pathname *path)
@@ -2838,8 +2865,10 @@
__be32 *p;
int status = 0;
- READ_BUF(4);
- READ32(n);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ n = be32_to_cpup(p);
if (n == 0)
goto root_path;
dprintk("path ");
@@ -2873,6 +2902,9 @@
dprintk(" status %d", status);
status = -EIO;
goto out;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_fs_locations(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs4_fs_locations *res)
@@ -2890,8 +2922,10 @@
status = decode_pathname(xdr, &res->fs_path);
if (unlikely(status != 0))
goto out;
- READ_BUF(4);
- READ32(n);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ n = be32_to_cpup(p);
if (n <= 0)
goto out_eio;
res->nlocations = 0;
@@ -2899,8 +2933,10 @@
u32 m;
struct nfs4_fs_location *loc = &res->locations[res->nlocations];
- READ_BUF(4);
- READ32(m);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ m = be32_to_cpup(p);
loc->nservers = 0;
dprintk("%s: servers ", __func__);
@@ -2939,6 +2975,8 @@
out:
dprintk("%s: fs_locations done, error = %d\n", __func__, status);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
out_eio:
status = -EIO;
goto out;
@@ -2953,12 +2991,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_MAXFILESIZE - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXFILESIZE)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[0] &= ~FATTR4_WORD0_MAXFILESIZE;
}
dprintk("%s: maxfilesize=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxlink(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *maxlink)
@@ -2970,12 +3013,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_MAXLINK - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXLINK)) {
- READ_BUF(4);
- READ32(*maxlink);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *maxlink = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_MAXLINK;
}
dprintk("%s: maxlink=%u\n", __func__, *maxlink);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxname(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *maxname)
@@ -2987,12 +3035,17 @@
if (unlikely(bitmap[0] & (FATTR4_WORD0_MAXNAME - 1U)))
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXNAME)) {
- READ_BUF(4);
- READ32(*maxname);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *maxname = be32_to_cpup(p);
bitmap[0] &= ~FATTR4_WORD0_MAXNAME;
}
dprintk("%s: maxname=%u\n", __func__, *maxname);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxread(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -3005,8 +3058,10 @@
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXREAD)) {
uint64_t maxread;
- READ_BUF(8);
- READ64(maxread);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, &maxread);
if (maxread > 0x7FFFFFFF)
maxread = 0x7FFFFFFF;
*res = (uint32_t)maxread;
@@ -3014,6 +3069,9 @@
}
dprintk("%s: maxread=%lu\n", __func__, (unsigned long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_maxwrite(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *res)
@@ -3026,8 +3084,10 @@
return -EIO;
if (likely(bitmap[0] & FATTR4_WORD0_MAXWRITE)) {
uint64_t maxwrite;
- READ_BUF(8);
- READ64(maxwrite);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, &maxwrite);
if (maxwrite > 0x7FFFFFFF)
maxwrite = 0x7FFFFFFF;
*res = (uint32_t)maxwrite;
@@ -3035,6 +3095,9 @@
}
dprintk("%s: maxwrite=%lu\n", __func__, (unsigned long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_mode(struct xdr_stream *xdr, uint32_t *bitmap, umode_t *mode)
@@ -3047,14 +3110,19 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_MODE - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_MODE)) {
- READ_BUF(4);
- READ32(tmp);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ tmp = be32_to_cpup(p);
*mode = tmp & ~S_IFMT;
bitmap[1] &= ~FATTR4_WORD1_MODE;
ret = NFS_ATTR_FATTR_MODE;
}
dprintk("%s: file mode=0%o\n", __func__, (unsigned int)*mode);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_nlink(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t *nlink)
@@ -3066,16 +3134,22 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_NUMLINKS - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_NUMLINKS)) {
- READ_BUF(4);
- READ32(*nlink);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ *nlink = be32_to_cpup(p);
bitmap[1] &= ~FATTR4_WORD1_NUMLINKS;
ret = NFS_ATTR_FATTR_NLINK;
}
dprintk("%s: nlink=%u\n", __func__, (unsigned int)*nlink);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
-static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, uint32_t *uid)
+static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap,
+ struct nfs_client *clp, uint32_t *uid, int may_sleep)
{
uint32_t len;
__be32 *p;
@@ -3085,10 +3159,16 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_OWNER - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_OWNER)) {
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
- if (len < XDR_MAX_NETOBJ) {
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
+ if (!may_sleep) {
+ /* do nothing */
+ } else if (len < XDR_MAX_NETOBJ) {
if (nfs_map_name_to_uid(clp, (char *)p, len, uid) == 0)
ret = NFS_ATTR_FATTR_OWNER;
else
@@ -3101,9 +3181,13 @@
}
dprintk("%s: uid=%d\n", __func__, (int)*uid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
-static int decode_attr_group(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, uint32_t *gid)
+static int decode_attr_group(struct xdr_stream *xdr, uint32_t *bitmap,
+ struct nfs_client *clp, uint32_t *gid, int may_sleep)
{
uint32_t len;
__be32 *p;
@@ -3113,10 +3197,16 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_OWNER_GROUP - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_OWNER_GROUP)) {
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
- if (len < XDR_MAX_NETOBJ) {
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
+ if (!may_sleep) {
+ /* do nothing */
+ } else if (len < XDR_MAX_NETOBJ) {
if (nfs_map_group_to_gid(clp, (char *)p, len, gid) == 0)
ret = NFS_ATTR_FATTR_GROUP;
else
@@ -3129,6 +3219,9 @@
}
dprintk("%s: gid=%d\n", __func__, (int)*gid);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_rdev(struct xdr_stream *xdr, uint32_t *bitmap, dev_t *rdev)
@@ -3143,9 +3236,11 @@
if (likely(bitmap[1] & FATTR4_WORD1_RAWDEV)) {
dev_t tmp;
- READ_BUF(8);
- READ32(major);
- READ32(minor);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ major = be32_to_cpup(p++);
+ minor = be32_to_cpup(p);
tmp = MKDEV(major, minor);
if (MAJOR(tmp) == major && MINOR(tmp) == minor)
*rdev = tmp;
@@ -3154,6 +3249,9 @@
}
dprintk("%s: rdev=(0x%x:0x%x)\n", __func__, major, minor);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_avail(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -3165,12 +3263,17 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_AVAIL - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_AVAIL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_AVAIL;
}
dprintk("%s: space avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_free(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -3182,12 +3285,17 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_FREE - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_FREE)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_FREE;
}
dprintk("%s: space free=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_total(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *res)
@@ -3199,12 +3307,17 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_TOTAL - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_TOTAL)) {
- READ_BUF(8);
- READ64(*res);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_TOTAL;
}
dprintk("%s: space total=%Lu\n", __func__, (unsigned long long)*res);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_space_used(struct xdr_stream *xdr, uint32_t *bitmap, uint64_t *used)
@@ -3216,14 +3329,19 @@
if (unlikely(bitmap[1] & (FATTR4_WORD1_SPACE_USED - 1U)))
return -EIO;
if (likely(bitmap[1] & FATTR4_WORD1_SPACE_USED)) {
- READ_BUF(8);
- READ64(*used);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, used);
bitmap[1] &= ~FATTR4_WORD1_SPACE_USED;
ret = NFS_ATTR_FATTR_SPACE_USED;
}
dprintk("%s: space used=%Lu\n", __func__,
(unsigned long long)*used);
return ret;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_time(struct xdr_stream *xdr, struct timespec *time)
@@ -3232,12 +3350,17 @@
uint64_t sec;
uint32_t nsec;
- READ_BUF(12);
- READ64(sec);
- READ32(nsec);
+ p = xdr_inline_decode(xdr, 12);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &sec);
+ nsec = be32_to_cpup(p);
time->tv_sec = (time_t)sec;
time->tv_nsec = (long)nsec;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_attr_time_access(struct xdr_stream *xdr, uint32_t *bitmap, struct timespec *time)
@@ -3315,11 +3438,16 @@
{
__be32 *p;
- READ_BUF(20);
- READ32(cinfo->atomic);
- READ64(cinfo->before);
- READ64(cinfo->after);
+ p = xdr_inline_decode(xdr, 20);
+ if (unlikely(!p))
+ goto out_overflow;
+ cinfo->atomic = be32_to_cpup(p++);
+ p = xdr_decode_hyper(p, &cinfo->before);
+ xdr_decode_hyper(p, &cinfo->after);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_access(struct xdr_stream *xdr, struct nfs4_accessres *access)
@@ -3331,40 +3459,62 @@
status = decode_op_hdr(xdr, OP_ACCESS);
if (status)
return status;
- READ_BUF(8);
- READ32(supp);
- READ32(acc);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ supp = be32_to_cpup(p++);
+ acc = be32_to_cpup(p);
access->supported = supp;
access->access = acc;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
+}
+
+static int decode_opaque_fixed(struct xdr_stream *xdr, void *buf, size_t len)
+{
+ __be32 *p;
+
+ p = xdr_inline_decode(xdr, len);
+ if (likely(p)) {
+ memcpy(buf, p, len);
+ return 0;
+ }
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
+}
+
+static int decode_stateid(struct xdr_stream *xdr, nfs4_stateid *stateid)
+{
+ return decode_opaque_fixed(xdr, stateid->data, NFS4_STATEID_SIZE);
}
static int decode_close(struct xdr_stream *xdr, struct nfs_closeres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_CLOSE);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
- return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- return 0;
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ return status;
+}
+
+static int decode_verifier(struct xdr_stream *xdr, void *verifier)
+{
+ return decode_opaque_fixed(xdr, verifier, 8);
}
static int decode_commit(struct xdr_stream *xdr, struct nfs_writeres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_COMMIT);
- if (status)
- return status;
- READ_BUF(8);
- COPYMEM(res->verf->verifier, 8);
- return 0;
+ if (!status)
+ status = decode_verifier(xdr, res->verf->verifier);
+ return status;
}
static int decode_create(struct xdr_stream *xdr, struct nfs4_change_info *cinfo)
@@ -3378,10 +3528,16 @@
return status;
if ((status = decode_change_info(xdr, cinfo)))
return status;
- READ_BUF(4);
- READ32(bmlen);
- READ_BUF(bmlen << 2);
- return 0;
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ bmlen = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, bmlen << 2);
+ if (likely(p))
+ return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_server_caps(struct xdr_stream *xdr, struct nfs4_server_caps_res *res)
@@ -3466,7 +3622,8 @@
return status;
}
-static int decode_getfattr(struct xdr_stream *xdr, struct nfs_fattr *fattr, const struct nfs_server *server)
+static int decode_getfattr(struct xdr_stream *xdr, struct nfs_fattr *fattr,
+ const struct nfs_server *server, int may_sleep)
{
__be32 *savep;
uint32_t attrlen,
@@ -3538,12 +3695,14 @@
goto xdr_error;
fattr->valid |= status;
- status = decode_attr_owner(xdr, bitmap, server->nfs_client, &fattr->uid);
+ status = decode_attr_owner(xdr, bitmap, server->nfs_client,
+ &fattr->uid, may_sleep);
if (status < 0)
goto xdr_error;
fattr->valid |= status;
- status = decode_attr_group(xdr, bitmap, server->nfs_client, &fattr->gid);
+ status = decode_attr_group(xdr, bitmap, server->nfs_client,
+ &fattr->gid, may_sleep);
if (status < 0)
goto xdr_error;
fattr->valid |= status;
@@ -3633,14 +3792,21 @@
if (status)
return status;
- READ_BUF(4);
- READ32(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
if (len > NFS4_FHSIZE)
return -EIO;
fh->size = len;
- READ_BUF(len);
- COPYMEM(fh->data, len);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
+ memcpy(fh->data, p, len);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_link(struct xdr_stream *xdr, struct nfs4_change_info *cinfo)
@@ -3662,10 +3828,12 @@
__be32 *p;
uint32_t namelen, type;
- READ_BUF(32);
- READ64(offset);
- READ64(length);
- READ32(type);
+ p = xdr_inline_decode(xdr, 32);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &offset);
+ p = xdr_decode_hyper(p, &length);
+ type = be32_to_cpup(p++);
if (fl != NULL) {
fl->fl_start = (loff_t)offset;
fl->fl_end = fl->fl_start + (loff_t)length - 1;
@@ -3676,23 +3844,27 @@
fl->fl_type = F_RDLCK;
fl->fl_pid = 0;
}
- READ64(clientid);
- READ32(namelen);
- READ_BUF(namelen);
- return -NFS4ERR_DENIED;
+ p = xdr_decode_hyper(p, &clientid);
+ namelen = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, namelen);
+ if (likely(p))
+ return -NFS4ERR_DENIED;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_lock(struct xdr_stream *xdr, struct nfs_lock_res *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_LOCK);
if (status == -EIO)
goto out;
if (status == 0) {
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
+ status = decode_stateid(xdr, &res->stateid);
+ if (unlikely(status))
+ goto out;
} else if (status == -NFS4ERR_DENIED)
status = decode_lock_denied(xdr, NULL);
if (res->open_seqid != NULL)
@@ -3713,16 +3885,13 @@
static int decode_locku(struct xdr_stream *xdr, struct nfs_locku_res *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_LOCKU);
if (status != -EIO)
nfs_increment_lock_seqid(status, res->seqid);
- if (status == 0) {
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- }
+ if (status == 0)
+ status = decode_stateid(xdr, &res->stateid);
return status;
}
@@ -3737,34 +3906,46 @@
__be32 *p;
uint32_t limit_type, nblocks, blocksize;
- READ_BUF(12);
- READ32(limit_type);
+ p = xdr_inline_decode(xdr, 12);
+ if (unlikely(!p))
+ goto out_overflow;
+ limit_type = be32_to_cpup(p++);
switch (limit_type) {
case 1:
- READ64(*maxsize);
+ xdr_decode_hyper(p, maxsize);
break;
case 2:
- READ32(nblocks);
- READ32(blocksize);
+ nblocks = be32_to_cpup(p++);
+ blocksize = be32_to_cpup(p);
*maxsize = (uint64_t)nblocks * (uint64_t)blocksize;
}
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_delegation(struct xdr_stream *xdr, struct nfs_openres *res)
{
__be32 *p;
uint32_t delegation_type;
+ int status;
- READ_BUF(4);
- READ32(delegation_type);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ delegation_type = be32_to_cpup(p);
if (delegation_type == NFS4_OPEN_DELEGATE_NONE) {
res->delegation_type = 0;
return 0;
}
- READ_BUF(NFS4_STATEID_SIZE+4);
- COPYMEM(res->delegation.data, NFS4_STATEID_SIZE);
- READ32(res->do_recall);
+ status = decode_stateid(xdr, &res->delegation);
+ if (unlikely(status))
+ return status;
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ res->do_recall = be32_to_cpup(p);
switch (delegation_type) {
case NFS4_OPEN_DELEGATE_READ:
@@ -3776,6 +3957,9 @@
return -EIO;
}
return decode_ace(xdr, NULL, res->server->nfs_client);
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_open(struct xdr_stream *xdr, struct nfs_openres *res)
@@ -3787,23 +3971,27 @@
status = decode_op_hdr(xdr, OP_OPEN);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ if (unlikely(status))
return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
decode_change_info(xdr, &res->cinfo);
- READ_BUF(8);
- READ32(res->rflags);
- READ32(bmlen);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ res->rflags = be32_to_cpup(p++);
+ bmlen = be32_to_cpup(p);
if (bmlen > 10)
goto xdr_error;
- READ_BUF(bmlen << 2);
+ p = xdr_inline_decode(xdr, bmlen << 2);
+ if (unlikely(!p))
+ goto out_overflow;
savewords = min_t(uint32_t, bmlen, NFS4_BITMAP_SIZE);
for (i = 0; i < savewords; ++i)
- READ32(res->attrset[i]);
+ res->attrset[i] = be32_to_cpup(p++);
for (; i < NFS4_BITMAP_SIZE; i++)
res->attrset[i] = 0;
@@ -3811,36 +3999,33 @@
xdr_error:
dprintk("%s: Bitmap too large! Length = %u\n", __func__, bmlen);
return -EIO;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_open_confirm(struct xdr_stream *xdr, struct nfs_open_confirmres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_OPEN_CONFIRM);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
- return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- return 0;
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ return status;
}
static int decode_open_downgrade(struct xdr_stream *xdr, struct nfs_closeres *res)
{
- __be32 *p;
int status;
status = decode_op_hdr(xdr, OP_OPEN_DOWNGRADE);
if (status != -EIO)
nfs_increment_open_seqid(status, res->seqid);
- if (status)
- return status;
- READ_BUF(NFS4_STATEID_SIZE);
- COPYMEM(res->stateid.data, NFS4_STATEID_SIZE);
- return 0;
+ if (!status)
+ status = decode_stateid(xdr, &res->stateid);
+ return status;
}
static int decode_putfh(struct xdr_stream *xdr)
@@ -3863,9 +4048,11 @@
status = decode_op_hdr(xdr, OP_READ);
if (status)
return status;
- READ_BUF(8);
- READ32(eof);
- READ32(count);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ eof = be32_to_cpup(p++);
+ count = be32_to_cpup(p);
hdrlen = (u8 *) p - (u8 *) iov->iov_base;
recvd = req->rq_rcv_buf.len - hdrlen;
if (count > recvd) {
@@ -3878,6 +4065,9 @@
res->eof = eof;
res->count = count;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct nfs4_readdir_res *readdir)
@@ -3892,17 +4082,17 @@
int status;
status = decode_op_hdr(xdr, OP_READDIR);
- if (status)
+ if (!status)
+ status = decode_verifier(xdr, readdir->verifier.data);
+ if (unlikely(status))
return status;
- READ_BUF(8);
- COPYMEM(readdir->verifier.data, 8);
dprintk("%s: verifier = %08x:%08x\n",
__func__,
((u32 *)readdir->verifier.data)[0],
((u32 *)readdir->verifier.data)[1]);
- hdrlen = (char *) p - (char *) iov->iov_base;
+ hdrlen = (char *) xdr->p - (char *) iov->iov_base;
recvd = rcvbuf->len - hdrlen;
if (pglen > recvd)
pglen = recvd;
@@ -3990,8 +4180,10 @@
return status;
/* Convert length of symlink */
- READ_BUF(4);
- READ32(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
if (len >= rcvbuf->page_len || len <= 0) {
dprintk("nfs: server returned giant symlink!\n");
return -ENAMETOOLONG;
@@ -4015,6 +4207,9 @@
kaddr[len+rcvbuf->page_base] = '\0';
kunmap_atomic(kaddr, KM_USER0);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_remove(struct xdr_stream *xdr, struct nfs4_change_info *cinfo)
@@ -4112,10 +4307,16 @@
status = decode_op_hdr(xdr, OP_SETATTR);
if (status)
return status;
- READ_BUF(4);
- READ32(bmlen);
- READ_BUF(bmlen << 2);
- return 0;
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ bmlen = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, bmlen << 2);
+ if (likely(p))
+ return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_setclientid(struct xdr_stream *xdr, struct nfs_client *clp)
@@ -4124,35 +4325,50 @@
uint32_t opnum;
int32_t nfserr;
- READ_BUF(8);
- READ32(opnum);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ opnum = be32_to_cpup(p++);
if (opnum != OP_SETCLIENTID) {
dprintk("nfs: decode_setclientid: Server returned operation"
" %d\n", opnum);
return -EIO;
}
- READ32(nfserr);
+ nfserr = be32_to_cpup(p);
if (nfserr == NFS_OK) {
- READ_BUF(8 + NFS4_VERIFIER_SIZE);
- READ64(clp->cl_clientid);
- COPYMEM(clp->cl_confirm.data, NFS4_VERIFIER_SIZE);
+ p = xdr_inline_decode(xdr, 8 + NFS4_VERIFIER_SIZE);
+ if (unlikely(!p))
+ goto out_overflow;
+ p = xdr_decode_hyper(p, &clp->cl_clientid);
+ memcpy(clp->cl_confirm.data, p, NFS4_VERIFIER_SIZE);
} else if (nfserr == NFSERR_CLID_INUSE) {
uint32_t len;
/* skip netid string */
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
/* skip uaddr string */
- READ_BUF(4);
- READ32(len);
- READ_BUF(len);
+ p = xdr_inline_decode(xdr, 4);
+ if (unlikely(!p))
+ goto out_overflow;
+ len = be32_to_cpup(p);
+ p = xdr_inline_decode(xdr, len);
+ if (unlikely(!p))
+ goto out_overflow;
return -NFSERR_CLID_INUSE;
} else
return nfs4_stat_to_errno(nfserr);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_setclientid_confirm(struct xdr_stream *xdr)
@@ -4169,11 +4385,16 @@
if (status)
return status;
- READ_BUF(16);
- READ32(res->count);
- READ32(res->verf->committed);
- COPYMEM(res->verf->verifier, 8);
+ p = xdr_inline_decode(xdr, 16);
+ if (unlikely(!p))
+ goto out_overflow;
+ res->count = be32_to_cpup(p++);
+ res->verf->committed = be32_to_cpup(p++);
+ memcpy(res->verf->verifier, p, 8);
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_delegreturn(struct xdr_stream *xdr)
@@ -4187,6 +4408,7 @@
{
__be32 *p;
uint32_t dummy;
+ char *dummy_str;
int status;
struct nfs_client *clp = res->client;
@@ -4194,36 +4416,45 @@
if (status)
return status;
- READ_BUF(8);
- READ64(clp->cl_ex_clid);
- READ_BUF(12);
- READ32(clp->cl_seqid);
- READ32(clp->cl_exchange_flags);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ xdr_decode_hyper(p, &clp->cl_ex_clid);
+ p = xdr_inline_decode(xdr, 12);
+ if (unlikely(!p))
+ goto out_overflow;
+ clp->cl_seqid = be32_to_cpup(p++);
+ clp->cl_exchange_flags = be32_to_cpup(p++);
/* We ask for SP4_NONE */
- READ32(dummy);
+ dummy = be32_to_cpup(p);
if (dummy != SP4_NONE)
return -EIO;
/* Throw away minor_id */
- READ_BUF(8);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
/* Throw away Major id */
- READ_BUF(4);
- READ32(dummy);
- READ_BUF(dummy);
+ status = decode_opaque_inline(xdr, &dummy, &dummy_str);
+ if (unlikely(status))
+ return status;
/* Throw away server_scope */
- READ_BUF(4);
- READ32(dummy);
- READ_BUF(dummy);
+ status = decode_opaque_inline(xdr, &dummy, &dummy_str);
+ if (unlikely(status))
+ return status;
/* Throw away Implementation id array */
- READ_BUF(4);
- READ32(dummy);
- READ_BUF(dummy);
+ status = decode_opaque_inline(xdr, &dummy, &dummy_str);
+ if (unlikely(status))
+ return status;
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_chan_attrs(struct xdr_stream *xdr,
@@ -4232,22 +4463,35 @@
__be32 *p;
u32 nr_attrs;
- READ_BUF(28);
- READ32(attrs->headerpadsz);
- READ32(attrs->max_rqst_sz);
- READ32(attrs->max_resp_sz);
- READ32(attrs->max_resp_sz_cached);
- READ32(attrs->max_ops);
- READ32(attrs->max_reqs);
- READ32(nr_attrs);
+ p = xdr_inline_decode(xdr, 28);
+ if (unlikely(!p))
+ goto out_overflow;
+ attrs->headerpadsz = be32_to_cpup(p++);
+ attrs->max_rqst_sz = be32_to_cpup(p++);
+ attrs->max_resp_sz = be32_to_cpup(p++);
+ attrs->max_resp_sz_cached = be32_to_cpup(p++);
+ attrs->max_ops = be32_to_cpup(p++);
+ attrs->max_reqs = be32_to_cpup(p++);
+ nr_attrs = be32_to_cpup(p);
if (unlikely(nr_attrs > 1)) {
printk(KERN_WARNING "%s: Invalid rdma channel attrs count %u\n",
__func__, nr_attrs);
return -EINVAL;
}
- if (nr_attrs == 1)
- READ_BUF(4); /* skip rdma_attrs */
+ if (nr_attrs == 1) {
+ p = xdr_inline_decode(xdr, 4); /* skip rdma_attrs */
+ if (unlikely(!p))
+ goto out_overflow;
+ }
return 0;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
+}
+
+static int decode_sessionid(struct xdr_stream *xdr, struct nfs4_sessionid *sid)
+{
+ return decode_opaque_fixed(xdr, sid->data, NFS4_MAX_SESSIONID_LEN);
}
static int decode_create_session(struct xdr_stream *xdr,
@@ -4259,24 +4503,26 @@
struct nfs4_session *session = clp->cl_session;
status = decode_op_hdr(xdr, OP_CREATE_SESSION);
-
- if (status)
+ if (!status)
+ status = decode_sessionid(xdr, &session->sess_id);
+ if (unlikely(status))
return status;
- /* sessionid */
- READ_BUF(NFS4_MAX_SESSIONID_LEN);
- COPYMEM(&session->sess_id, NFS4_MAX_SESSIONID_LEN);
-
/* seqid, flags */
- READ_BUF(8);
- READ32(clp->cl_seqid);
- READ32(session->flags);
+ p = xdr_inline_decode(xdr, 8);
+ if (unlikely(!p))
+ goto out_overflow;
+ clp->cl_seqid = be32_to_cpup(p++);
+ session->flags = be32_to_cpup(p);
/* Channel attributes */
status = decode_chan_attrs(xdr, &session->fc_attrs);
if (!status)
status = decode_chan_attrs(xdr, &session->bc_attrs);
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ return -EIO;
}
static int decode_destroy_session(struct xdr_stream *xdr, void *dummy)
@@ -4300,7 +4546,9 @@
return 0;
status = decode_op_hdr(xdr, OP_SEQUENCE);
- if (status)
+ if (!status)
+ status = decode_sessionid(xdr, &id);
+ if (unlikely(status))
goto out_err;
/*
@@ -4309,36 +4557,43 @@
*/
status = -ESERVERFAULT;
- slot = &res->sr_session->fc_slot_table.slots[res->sr_slotid];
- READ_BUF(NFS4_MAX_SESSIONID_LEN + 20);
- COPYMEM(id.data, NFS4_MAX_SESSIONID_LEN);
if (memcmp(id.data, res->sr_session->sess_id.data,
NFS4_MAX_SESSIONID_LEN)) {
dprintk("%s Invalid session id\n", __func__);
goto out_err;
}
+
+ p = xdr_inline_decode(xdr, 20);
+ if (unlikely(!p))
+ goto out_overflow;
+
/* seqid */
- READ32(dummy);
+ slot = &res->sr_session->fc_slot_table.slots[res->sr_slotid];
+ dummy = be32_to_cpup(p++);
if (dummy != slot->seq_nr) {
dprintk("%s Invalid sequence number\n", __func__);
goto out_err;
}
/* slot id */
- READ32(dummy);
+ dummy = be32_to_cpup(p++);
if (dummy != res->sr_slotid) {
dprintk("%s Invalid slot id\n", __func__);
goto out_err;
}
/* highest slot id - currently not processed */
- READ32(dummy);
+ dummy = be32_to_cpup(p++);
/* target highest slot id - currently not processed */
- READ32(dummy);
+ dummy = be32_to_cpup(p++);
/* result flags - currently not processed */
- READ32(dummy);
+ dummy = be32_to_cpup(p);
status = 0;
out_err:
res->sr_status = status;
return status;
+out_overflow:
+ print_overflow_msg(__func__, xdr);
+ status = -EIO;
+ goto out_err;
#else /* CONFIG_NFS_V4_1 */
return 0;
#endif /* CONFIG_NFS_V4_1 */
@@ -4370,7 +4625,8 @@
status = decode_open_downgrade(&xdr, res);
if (status != 0)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4397,7 +4653,8 @@
status = decode_access(&xdr, res);
if (status != 0)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4424,7 +4681,8 @@
goto out;
if ((status = decode_getfh(&xdr, res->fh)) != 0)
goto out;
- status = decode_getfattr(&xdr, res->fattr, res->server);
+ status = decode_getfattr(&xdr, res->fattr, res->server
+ ,!RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4448,7 +4706,8 @@
if ((status = decode_putrootfh(&xdr)) != 0)
goto out;
if ((status = decode_getfh(&xdr, res->fh)) == 0)
- status = decode_getfattr(&xdr, res->fattr, res->server);
+ status = decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4473,7 +4732,8 @@
goto out;
if ((status = decode_remove(&xdr, &res->cinfo)) != 0)
goto out;
- decode_getfattr(&xdr, &res->dir_attr, res->server);
+ decode_getfattr(&xdr, &res->dir_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4503,11 +4763,13 @@
if ((status = decode_rename(&xdr, &res->old_cinfo, &res->new_cinfo)) != 0)
goto out;
/* Current FH is target directory */
- if (decode_getfattr(&xdr, res->new_fattr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->new_fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if ((status = decode_restorefh(&xdr)) != 0)
goto out;
- decode_getfattr(&xdr, res->old_fattr, res->server);
+ decode_getfattr(&xdr, res->old_fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4540,11 +4802,13 @@
* Note order: OP_LINK leaves the directory as the current
* filehandle.
*/
- if (decode_getfattr(&xdr, res->dir_attr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->dir_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if ((status = decode_restorefh(&xdr)) != 0)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4573,11 +4837,13 @@
goto out;
if ((status = decode_getfh(&xdr, res->fh)) != 0)
goto out;
- if (decode_getfattr(&xdr, res->fattr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if ((status = decode_restorefh(&xdr)) != 0)
goto out;
- decode_getfattr(&xdr, res->dir_fattr, res->server);
+ decode_getfattr(&xdr, res->dir_fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4609,7 +4875,8 @@
status = decode_putfh(&xdr);
if (status)
goto out;
- status = decode_getfattr(&xdr, res->fattr, res->server);
+ status = decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4716,7 +4983,8 @@
* an ESTALE error. Shouldn't be a problem,
* though, since fattr->valid will remain unset.
*/
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4748,11 +5016,13 @@
goto out;
if (decode_getfh(&xdr, &res->fh) != 0)
goto out;
- if (decode_getfattr(&xdr, res->f_attr, res->server) != 0)
+ if (decode_getfattr(&xdr, res->f_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task)) != 0)
goto out;
if (decode_restorefh(&xdr) != 0)
goto out;
- decode_getfattr(&xdr, res->dir_attr, res->server);
+ decode_getfattr(&xdr, res->dir_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4800,7 +5070,8 @@
status = decode_open(&xdr, res);
if (status)
goto out;
- decode_getfattr(&xdr, res->f_attr, res->server);
+ decode_getfattr(&xdr, res->f_attr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -4827,7 +5098,8 @@
status = decode_setattr(&xdr);
if (status)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -5001,7 +5273,8 @@
status = decode_write(&xdr, res);
if (status)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
if (!status)
status = res->count;
out:
@@ -5030,7 +5303,8 @@
status = decode_commit(&xdr, res);
if (status)
goto out;
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -5194,7 +5468,8 @@
if (status != 0)
goto out;
status = decode_delegreturn(&xdr);
- decode_getfattr(&xdr, res->fattr, res->server);
+ decode_getfattr(&xdr, res->fattr, res->server,
+ !RPC_IS_ASYNC(rqstp->rq_task));
out:
return status;
}
@@ -5222,7 +5497,8 @@
goto out;
xdr_enter_page(&xdr, PAGE_SIZE);
status = decode_getfattr(&xdr, &res->fs_locations->fattr,
- res->fs_locations->server);
+ res->fs_locations->server,
+ !RPC_IS_ASYNC(req->rq_task));
out:
return status;
}
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 96c4ebf..12c9e66 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -18,7 +18,6 @@
#include <linux/sunrpc/clnt.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
#include <asm/system.h>
@@ -61,17 +60,15 @@
return p;
}
-static void nfs_readdata_free(struct nfs_read_data *p)
+void nfs_readdata_free(struct nfs_read_data *p)
{
if (p && (p->pagevec != &p->page_array[0]))
kfree(p->pagevec);
mempool_free(p, nfs_rdata_mempool);
}
-void nfs_readdata_release(void *data)
+static void nfs_readdata_release(struct nfs_read_data *rdata)
{
- struct nfs_read_data *rdata = data;
-
put_nfs_open_context(rdata->args.context);
nfs_readdata_free(rdata);
}
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 0b4cbdc..9c85cdb 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -158,7 +158,7 @@
{ Opt_mountvers, "mountvers=%s" },
{ Opt_nfsvers, "nfsvers=%s" },
{ Opt_nfsvers, "vers=%s" },
- { Opt_minorversion, "minorversion=%u" },
+ { Opt_minorversion, "minorversion=%s" },
{ Opt_sec, "sec=%s" },
{ Opt_proto, "proto=%s" },
@@ -742,129 +742,10 @@
}
}
+ dfprintk(MOUNT, "NFS: Invalid IP address specified\n");
return 0;
}
-static void nfs_parse_ipv4_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- struct sockaddr_in *sin = (struct sockaddr_in *)sap;
- u8 *addr = (u8 *)&sin->sin_addr.s_addr;
-
- if (str_len <= INET_ADDRSTRLEN) {
- dfprintk(MOUNT, "NFS: parsing IPv4 address %*s\n",
- (int)str_len, string);
-
- sin->sin_family = AF_INET;
- *addr_len = sizeof(*sin);
- if (in4_pton(string, str_len, addr, '\0', NULL))
- return;
- }
-
- sap->sa_family = AF_UNSPEC;
- *addr_len = 0;
-}
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-static int nfs_parse_ipv6_scope_id(const char *string, const size_t str_len,
- const char *delim,
- struct sockaddr_in6 *sin6)
-{
- char *p;
- size_t len;
-
- if ((string + str_len) == delim)
- return 1;
-
- if (*delim != IPV6_SCOPE_DELIMITER)
- return 0;
-
- if (!(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL))
- return 0;
-
- len = (string + str_len) - delim - 1;
- p = kstrndup(delim + 1, len, GFP_KERNEL);
- if (p) {
- unsigned long scope_id = 0;
- struct net_device *dev;
-
- dev = dev_get_by_name(&init_net, p);
- if (dev != NULL) {
- scope_id = dev->ifindex;
- dev_put(dev);
- } else {
- if (strict_strtoul(p, 10, &scope_id) == 0) {
- kfree(p);
- return 0;
- }
- }
-
- kfree(p);
-
- sin6->sin6_scope_id = scope_id;
- dfprintk(MOUNT, "NFS: IPv6 scope ID = %lu\n", scope_id);
- return 1;
- }
-
- return 0;
-}
-
-static void nfs_parse_ipv6_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
- u8 *addr = (u8 *)&sin6->sin6_addr.in6_u;
- const char *delim;
-
- if (str_len <= INET6_ADDRSTRLEN) {
- dfprintk(MOUNT, "NFS: parsing IPv6 address %*s\n",
- (int)str_len, string);
-
- sin6->sin6_family = AF_INET6;
- *addr_len = sizeof(*sin6);
- if (in6_pton(string, str_len, addr,
- IPV6_SCOPE_DELIMITER, &delim) != 0) {
- if (nfs_parse_ipv6_scope_id(string, str_len,
- delim, sin6) != 0)
- return;
- }
- }
-
- sap->sa_family = AF_UNSPEC;
- *addr_len = 0;
-}
-#else
-static void nfs_parse_ipv6_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- sap->sa_family = AF_UNSPEC;
- *addr_len = 0;
-}
-#endif
-
-/*
- * Construct a sockaddr based on the contents of a string that contains
- * an IP address in presentation format.
- *
- * If there is a problem constructing the new sockaddr, set the address
- * family to AF_UNSPEC.
- */
-void nfs_parse_ip_address(char *string, size_t str_len,
- struct sockaddr *sap, size_t *addr_len)
-{
- unsigned int i, colons;
-
- colons = 0;
- for (i = 0; i < str_len; i++)
- if (string[i] == ':')
- colons++;
-
- if (colons >= 2)
- nfs_parse_ipv6_address(string, str_len, sap, addr_len);
- else
- nfs_parse_ipv4_address(string, str_len, sap, addr_len);
-}
-
/*
* Sanity check the NFS transport protocol.
*
@@ -904,8 +785,6 @@
/*
* Parse the value of the 'sec=' option.
- *
- * The flavor_len setting is for v4 mounts.
*/
static int nfs_parse_security_flavors(char *value,
struct nfs_parsed_mount_data *mnt)
@@ -916,53 +795,43 @@
switch (match_token(value, nfs_secflavor_tokens, args)) {
case Opt_sec_none:
- mnt->auth_flavor_len = 0;
mnt->auth_flavors[0] = RPC_AUTH_NULL;
break;
case Opt_sec_sys:
- mnt->auth_flavor_len = 0;
mnt->auth_flavors[0] = RPC_AUTH_UNIX;
break;
case Opt_sec_krb5:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_KRB5;
break;
case Opt_sec_krb5i:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_KRB5I;
break;
case Opt_sec_krb5p:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_KRB5P;
break;
case Opt_sec_lkey:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_LKEY;
break;
case Opt_sec_lkeyi:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_LKEYI;
break;
case Opt_sec_lkeyp:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_LKEYP;
break;
case Opt_sec_spkm:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_SPKM;
break;
case Opt_sec_spkmi:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_SPKMI;
break;
case Opt_sec_spkmp:
- mnt->auth_flavor_len = 1;
mnt->auth_flavors[0] = RPC_AUTH_GSS_SPKMP;
break;
default:
return 0;
}
+ mnt->auth_flavor_len = 1;
return 1;
}
@@ -1001,7 +870,6 @@
while ((p = strsep(&raw, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
unsigned long option;
- int int_option;
int token;
if (!*p)
@@ -1273,11 +1141,16 @@
}
break;
case Opt_minorversion:
- if (match_int(args, &int_option))
- return 0;
- if (int_option < 0 || int_option > NFS4_MAX_MINOR_VERSION)
- return 0;
- mnt->minorversion = int_option;
+ string = match_strdup(args);
+ if (string == NULL)
+ goto out_nomem;
+ rc = strict_strtoul(string, 10, &option);
+ kfree(string);
+ if (rc != 0)
+ goto out_invalid_value;
+ if (option > NFS4_MAX_MINOR_VERSION)
+ goto out_invalid_value;
+ mnt->minorversion = option;
break;
/*
@@ -1352,11 +1225,14 @@
string = match_strdup(args);
if (string == NULL)
goto out_nomem;
- nfs_parse_ip_address(string, strlen(string),
- (struct sockaddr *)
- &mnt->nfs_server.address,
- &mnt->nfs_server.addrlen);
+ mnt->nfs_server.addrlen =
+ rpc_pton(string, strlen(string),
+ (struct sockaddr *)
+ &mnt->nfs_server.address,
+ sizeof(mnt->nfs_server.address));
kfree(string);
+ if (mnt->nfs_server.addrlen == 0)
+ goto out_invalid_address;
break;
case Opt_clientaddr:
string = match_strdup(args);
@@ -1376,11 +1252,14 @@
string = match_strdup(args);
if (string == NULL)
goto out_nomem;
- nfs_parse_ip_address(string, strlen(string),
- (struct sockaddr *)
- &mnt->mount_server.address,
- &mnt->mount_server.addrlen);
+ mnt->mount_server.addrlen =
+ rpc_pton(string, strlen(string),
+ (struct sockaddr *)
+ &mnt->mount_server.address,
+ sizeof(mnt->mount_server.address));
kfree(string);
+ if (mnt->mount_server.addrlen == 0)
+ goto out_invalid_address;
break;
case Opt_lookupcache:
string = match_strdup(args);
@@ -1432,8 +1311,11 @@
return 1;
+out_invalid_address:
+ printk(KERN_INFO "NFS: bad IP address specified: %s\n", p);
+ return 0;
out_invalid_value:
- printk(KERN_INFO "NFS: bad mount option value specified: %s \n", p);
+ printk(KERN_INFO "NFS: bad mount option value specified: %s\n", p);
return 0;
out_nomem:
printk(KERN_INFO "NFS: not enough memory to parse option\n");
@@ -1445,13 +1327,50 @@
}
/*
+ * Match the requested auth flavors with the list returned by
+ * the server. Returns zero and sets the mount's authentication
+ * flavor on success; returns -EACCES if server does not support
+ * the requested flavor.
+ */
+static int nfs_walk_authlist(struct nfs_parsed_mount_data *args,
+ struct nfs_mount_request *request)
+{
+ unsigned int i, j, server_authlist_len = *(request->auth_flav_len);
+
+ /*
+ * We avoid sophisticated negotiating here, as there are
+ * plenty of cases where we can get it wrong, providing
+ * either too little or too much security.
+ *
+ * RFC 2623, section 2.7 suggests we SHOULD prefer the
+ * flavor listed first. However, some servers list
+ * AUTH_NULL first. Our caller plants AUTH_SYS, the
+ * preferred default, in args->auth_flavors[0] if user
+ * didn't specify sec= mount option.
+ */
+ for (i = 0; i < args->auth_flavor_len; i++)
+ for (j = 0; j < server_authlist_len; j++)
+ if (args->auth_flavors[i] == request->auth_flavs[j]) {
+ dfprintk(MOUNT, "NFS: using auth flavor %d\n",
+ request->auth_flavs[j]);
+ args->auth_flavors[0] = request->auth_flavs[j];
+ return 0;
+ }
+
+ dfprintk(MOUNT, "NFS: server does not support requested auth flavor\n");
+ nfs_umount(request);
+ return -EACCES;
+}
+
+/*
* Use the remote server's MOUNT service to request the NFS file handle
* corresponding to the provided path.
*/
static int nfs_try_mount(struct nfs_parsed_mount_data *args,
struct nfs_fh *root_fh)
{
- unsigned int auth_flavor_len = 0;
+ rpc_authflavor_t server_authlist[NFS_MAX_SECFLAVORS];
+ unsigned int server_authlist_len = ARRAY_SIZE(server_authlist);
struct nfs_mount_request request = {
.sap = (struct sockaddr *)
&args->mount_server.address,
@@ -1459,7 +1378,8 @@
.protocol = args->mount_server.protocol,
.fh = root_fh,
.noresvport = args->flags & NFS_MOUNT_NORESVPORT,
- .auth_flav_len = &auth_flavor_len,
+ .auth_flav_len = &server_authlist_len,
+ .auth_flavs = server_authlist,
};
int status;
@@ -1489,19 +1409,25 @@
/*
* autobind will be used if mount_server.port == 0
*/
- nfs_set_port(request.sap, args->mount_server.port);
+ rpc_set_port(request.sap, args->mount_server.port);
/*
* Now ask the mount server to map our export path
* to a file handle.
*/
status = nfs_mount(&request);
- if (status == 0)
- return 0;
+ if (status != 0) {
+ dfprintk(MOUNT, "NFS: unable to mount server %s, error %d\n",
+ request.hostname, status);
+ return status;
+ }
- dfprintk(MOUNT, "NFS: unable to mount server %s, error %d\n",
- request.hostname, status);
- return status;
+ /*
+ * MNTv1 (NFSv2) does not support auth flavor negotiation.
+ */
+ if (args->mount_server.version != NFS_MNT3_VERSION)
+ return 0;
+ return nfs_walk_authlist(args, &request);
}
static int nfs_parse_simple_hostname(const char *dev_name,
@@ -1676,6 +1602,7 @@
args->nfs_server.port = 0; /* autobind unless user sets port */
args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
args->auth_flavors[0] = RPC_AUTH_UNIX;
+ args->auth_flavor_len = 1;
switch (data->version) {
case 1:
@@ -1776,7 +1703,7 @@
&args->nfs_server.address))
goto out_no_address;
- nfs_set_port((struct sockaddr *)&args->nfs_server.address,
+ rpc_set_port((struct sockaddr *)&args->nfs_server.address,
args->nfs_server.port);
nfs_set_mount_transport_protocol(args);
@@ -2339,7 +2266,7 @@
args->acdirmax = NFS_DEF_ACDIRMAX;
args->nfs_server.port = NFS_PORT; /* 2049 unless user set port= */
args->auth_flavors[0] = RPC_AUTH_UNIX;
- args->auth_flavor_len = 0;
+ args->auth_flavor_len = 1;
args->minorversion = 0;
switch (data->version) {
@@ -2409,7 +2336,7 @@
&args->nfs_server.address))
return -EINVAL;
- nfs_set_port((struct sockaddr *)&args->nfs_server.address,
+ rpc_set_port((struct sockaddr *)&args->nfs_server.address,
args->nfs_server.port);
nfs_validate_transport_protocol(args);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index ce72882..120acad 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -13,6 +13,7 @@
#include <linux/file.h>
#include <linux/writeback.h>
#include <linux/swap.h>
+#include <linux/migrate.h>
#include <linux/sunrpc/clnt.h>
#include <linux/nfs_fs.h>
@@ -26,6 +27,7 @@
#include "internal.h"
#include "iostat.h"
#include "nfs4_fs.h"
+#include "fscache.h"
#define NFSDBG_FACILITY NFSDBG_PAGECACHE
@@ -87,17 +89,15 @@
return p;
}
-static void nfs_writedata_free(struct nfs_write_data *p)
+void nfs_writedata_free(struct nfs_write_data *p)
{
if (p && (p->pagevec != &p->page_array[0]))
kfree(p->pagevec);
mempool_free(p, nfs_wdata_mempool);
}
-void nfs_writedata_release(void *data)
+static void nfs_writedata_release(struct nfs_write_data *wdata)
{
- struct nfs_write_data *wdata = data;
-
put_nfs_open_context(wdata->args.context);
nfs_writedata_free(wdata);
}
@@ -202,8 +202,10 @@
struct nfs_server *nfss = NFS_SERVER(inode);
if (atomic_long_inc_return(&nfss->writeback) >
- NFS_CONGESTION_ON_THRESH)
- set_bdi_congested(&nfss->backing_dev_info, WRITE);
+ NFS_CONGESTION_ON_THRESH) {
+ set_bdi_congested(&nfss->backing_dev_info,
+ BLK_RW_ASYNC);
+ }
}
return ret;
}
@@ -215,27 +217,20 @@
end_page_writeback(page);
if (atomic_long_dec_return(&nfss->writeback) < NFS_CONGESTION_OFF_THRESH)
- clear_bdi_congested(&nfss->backing_dev_info, WRITE);
+ clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
}
-/*
- * Find an associated nfs write request, and prepare to flush it out
- * May return an error if the user signalled nfs_wait_on_request().
- */
-static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
- struct page *page)
+static struct nfs_page *nfs_find_and_lock_request(struct page *page)
{
struct inode *inode = page->mapping->host;
struct nfs_page *req;
int ret;
spin_lock(&inode->i_lock);
- for(;;) {
+ for (;;) {
req = nfs_page_find_request_locked(page);
- if (req == NULL) {
- spin_unlock(&inode->i_lock);
- return 0;
- }
+ if (req == NULL)
+ break;
if (nfs_set_page_tag_locked(req))
break;
/* Note: If we hold the page lock, as is the case in nfs_writepage,
@@ -247,23 +242,40 @@
ret = nfs_wait_on_request(req);
nfs_release_request(req);
if (ret != 0)
- return ret;
+ return ERR_PTR(ret);
spin_lock(&inode->i_lock);
}
- if (test_bit(PG_CLEAN, &req->wb_flags)) {
- spin_unlock(&inode->i_lock);
- BUG();
- }
- if (nfs_set_page_writeback(page) != 0) {
- spin_unlock(&inode->i_lock);
- BUG();
- }
spin_unlock(&inode->i_lock);
+ return req;
+}
+
+/*
+ * Find an associated nfs write request, and prepare to flush it out
+ * May return an error if the user signalled nfs_wait_on_request().
+ */
+static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
+ struct page *page)
+{
+ struct nfs_page *req;
+ int ret = 0;
+
+ req = nfs_find_and_lock_request(page);
+ if (!req)
+ goto out;
+ ret = PTR_ERR(req);
+ if (IS_ERR(req))
+ goto out;
+
+ ret = nfs_set_page_writeback(page);
+ BUG_ON(ret != 0);
+ BUG_ON(test_bit(PG_CLEAN, &req->wb_flags));
+
if (!nfs_pageio_add_request(pgio, req)) {
nfs_redirty_request(req);
- return pgio->pg_error;
+ ret = pgio->pg_error;
}
- return 0;
+out:
+ return ret;
}
static int nfs_do_writepage(struct page *page, struct writeback_control *wbc, struct nfs_pageio_descriptor *pgio)
@@ -1580,6 +1592,41 @@
return nfs_wb_page_priority(inode, page, FLUSH_STABLE);
}
+#ifdef CONFIG_MIGRATION
+int nfs_migrate_page(struct address_space *mapping, struct page *newpage,
+ struct page *page)
+{
+ struct nfs_page *req;
+ int ret;
+
+ if (PageFsCache(page))
+ nfs_fscache_release_page(page, GFP_KERNEL);
+
+ req = nfs_find_and_lock_request(page);
+ ret = PTR_ERR(req);
+ if (IS_ERR(req))
+ goto out;
+
+ ret = migrate_page(mapping, newpage, page);
+ if (!req)
+ goto out;
+ if (ret)
+ goto out_unlock;
+ page_cache_get(newpage);
+ req->wb_page = newpage;
+ SetPagePrivate(newpage);
+ set_page_private(newpage, page_private(page));
+ ClearPagePrivate(page);
+ set_page_private(page, 0);
+ page_cache_release(page);
+out_unlock:
+ nfs_clear_page_tag_locked(req);
+ nfs_release_request(req);
+out:
+ return ret;
+}
+#endif
+
int __init nfs_init_writepagecache(void)
{
nfs_wdata_cachep = kmem_cache_create("nfs_write_data",
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index b92a276..d946264 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -85,6 +85,11 @@
(*bpp)[-1] = '\n';
}
+static int expkey_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, expkey_request);
+}
+
static struct svc_expkey *svc_expkey_update(struct svc_expkey *new, struct svc_expkey *old);
static struct svc_expkey *svc_expkey_lookup(struct svc_expkey *);
static struct cache_detail svc_expkey_cache;
@@ -259,7 +264,7 @@
.hash_table = expkey_table,
.name = "nfsd.fh",
.cache_put = expkey_put,
- .cache_request = expkey_request,
+ .cache_upcall = expkey_upcall,
.cache_parse = expkey_parse,
.cache_show = expkey_show,
.match = expkey_match,
@@ -355,6 +360,11 @@
(*bpp)[-1] = '\n';
}
+static int svc_export_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, svc_export_request);
+}
+
static struct svc_export *svc_export_update(struct svc_export *new,
struct svc_export *old);
static struct svc_export *svc_export_lookup(struct svc_export *);
@@ -724,7 +734,7 @@
.hash_table = export_table,
.name = "nfsd.export",
.cache_put = svc_export_put,
- .cache_request = svc_export_request,
+ .cache_upcall = svc_export_upcall,
.cache_parse = svc_export_parse,
.cache_show = svc_export_show,
.match = svc_export_match,
diff --git a/fs/nfsd/nfs4idmap.c b/fs/nfsd/nfs4idmap.c
index 5b39842..cdfa86f 100644
--- a/fs/nfsd/nfs4idmap.c
+++ b/fs/nfsd/nfs4idmap.c
@@ -146,6 +146,12 @@
}
static int
+idtoname_upcall(struct cache_detail *cd, struct cache_head *ch)
+{
+ return sunrpc_cache_pipe_upcall(cd, ch, idtoname_request);
+}
+
+static int
idtoname_match(struct cache_head *ca, struct cache_head *cb)
{
struct ent *a = container_of(ca, struct ent, h);
@@ -175,10 +181,10 @@
}
static void
-warn_no_idmapd(struct cache_detail *detail)
+warn_no_idmapd(struct cache_detail *detail, int has_died)
{
printk("nfsd: nfsv4 idmapping failing: has idmapd %s?\n",
- detail->last_close? "died" : "not been started");
+ has_died ? "died" : "not been started");
}
@@ -192,7 +198,7 @@
.hash_table = idtoname_table,
.name = "nfs4.idtoname",
.cache_put = ent_put,
- .cache_request = idtoname_request,
+ .cache_upcall = idtoname_upcall,
.cache_parse = idtoname_parse,
.cache_show = idtoname_show,
.warn_no_listener = warn_no_idmapd,
@@ -325,6 +331,12 @@
}
static int
+nametoid_upcall(struct cache_detail *cd, struct cache_head *ch)
+{
+ return sunrpc_cache_pipe_upcall(cd, ch, nametoid_request);
+}
+
+static int
nametoid_match(struct cache_head *ca, struct cache_head *cb)
{
struct ent *a = container_of(ca, struct ent, h);
@@ -363,7 +375,7 @@
.hash_table = nametoid_table,
.name = "nfs4.nametoid",
.cache_put = ent_put,
- .cache_request = nametoid_request,
+ .cache_upcall = nametoid_upcall,
.cache_parse = nametoid_parse,
.cache_show = nametoid_show,
.warn_no_listener = warn_no_idmapd,
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index b51e7ae..b764d7d 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/inet.h>
#include <linux/string.h>
-#include <linux/smp_lock.h>
#include <linux/ctype.h>
#include <linux/nfs.h>
@@ -38,6 +37,7 @@
#include <linux/nfsd/xdr.h>
#include <linux/nfsd/syscall.h>
#include <linux/lockd/lockd.h>
+#include <linux/sunrpc/clnt.h>
#include <asm/uaccess.h>
#include <net/ipv6.h>
@@ -491,22 +491,18 @@
*
* Input:
* buf: '\n'-terminated C string containing a
- * presentation format IPv4 address
+ * presentation format IP address
* size: length of C string in @buf
* Output:
* On success: returns zero if all specified locks were released;
* returns one if one or more locks were not released
* On error: return code is negative errno value
- *
- * Note: Only AF_INET client addresses are passed in
*/
static ssize_t write_unlock_ip(struct file *file, char *buf, size_t size)
{
- struct sockaddr_in sin = {
- .sin_family = AF_INET,
- };
- int b1, b2, b3, b4;
- char c;
+ struct sockaddr_storage address;
+ struct sockaddr *sap = (struct sockaddr *)&address;
+ size_t salen = sizeof(address);
char *fo_path;
/* sanity check */
@@ -520,14 +516,10 @@
if (qword_get(&buf, fo_path, size) < 0)
return -EINVAL;
- /* get ipv4 address */
- if (sscanf(fo_path, "%u.%u.%u.%u%c", &b1, &b2, &b3, &b4, &c) != 4)
+ if (rpc_pton(fo_path, size, sap, salen) == 0)
return -EINVAL;
- if (b1 > 255 || b2 > 255 || b3 > 255 || b4 > 255)
- return -EINVAL;
- sin.sin_addr.s_addr = htonl((b1 << 24) | (b2 << 16) | (b3 << 8) | b4);
- return nlmsvc_unlock_all_by_ip((struct sockaddr *)&sin);
+ return nlmsvc_unlock_all_by_ip(sap);
}
/**
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 5a280a9..d68cd05 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -18,7 +18,6 @@
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/freezer.h>
#include <linux/fs_struct.h>
#include <linux/kthread.h>
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 4145083..23341c1 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -678,7 +678,6 @@
nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
int access, struct file **filp)
{
- const struct cred *cred = current_cred();
struct dentry *dentry;
struct inode *inode;
int flags = O_RDONLY|O_LARGEFILE;
@@ -733,7 +732,7 @@
vfs_dq_init(inode);
}
*filp = dentry_open(dget(dentry), mntget(fhp->fh_export->ex_path.mnt),
- flags, cred);
+ flags, current_cred());
if (IS_ERR(*filp))
host_err = PTR_ERR(*filp);
else
diff --git a/fs/nilfs2/Kconfig b/fs/nilfs2/Kconfig
new file mode 100644
index 0000000..72da095
--- /dev/null
+++ b/fs/nilfs2/Kconfig
@@ -0,0 +1,25 @@
+config NILFS2_FS
+ tristate "NILFS2 file system support (EXPERIMENTAL)"
+ depends on BLOCK && EXPERIMENTAL
+ select CRC32
+ help
+ NILFS2 is a log-structured file system (LFS) supporting continuous
+ snapshotting. In addition to versioning capability of the entire
+ file system, users can even restore files mistakenly overwritten or
+ destroyed just a few seconds ago. Since this file system can keep
+ consistency like conventional LFS, it achieves quick recovery after
+ system crashes.
+
+ NILFS2 creates a number of checkpoints every few seconds or per
+ synchronous write basis (unless there is no change). Users can
+ select significant versions among continuously created checkpoints,
+ and can change them into snapshots which will be preserved for long
+ periods until they are changed back to checkpoints. Each
+ snapshot is mountable as a read-only file system concurrently with
+ its writable mount, and this feature is convenient for online backup.
+
+ Some features including atime, extended attributes, and POSIX ACLs,
+ are not supported yet.
+
+ To compile this file system support as a module, choose M here: the
+ module will be called nilfs2. If unsure, say N.
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index 36df60b..99d58a0 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -568,6 +568,7 @@
}
static struct lock_class_key nilfs_bmap_dat_lock_key;
+static struct lock_class_key nilfs_bmap_mdt_lock_key;
/**
* nilfs_bmap_read - read a bmap from an inode
@@ -603,7 +604,11 @@
bmap->b_ptr_type = NILFS_BMAP_PTR_VS;
bmap->b_last_allocated_key = 0;
bmap->b_last_allocated_ptr = NILFS_BMAP_INVALID_PTR;
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_mdt_lock_key);
break;
+ case NILFS_IFILE_INO:
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_mdt_lock_key);
+ /* Fall through */
default:
bmap->b_ptr_type = NILFS_BMAP_PTR_VM;
bmap->b_last_allocated_key = 0;
diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c
index 7d49813..aec942c 100644
--- a/fs/nilfs2/cpfile.c
+++ b/fs/nilfs2/cpfile.c
@@ -307,7 +307,7 @@
ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
if (ret < 0) {
if (ret != -ENOENT)
- goto out_header;
+ break;
/* skip hole */
ret = 0;
continue;
@@ -340,7 +340,7 @@
continue;
printk(KERN_ERR "%s: cannot delete block\n",
__func__);
- goto out_header;
+ break;
}
}
@@ -358,7 +358,6 @@
kunmap_atomic(kaddr, KM_USER0);
}
- out_header:
brelse(header_bh);
out_sem:
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 0b2710e..8927ca2 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -134,15 +134,6 @@
entry = nilfs_palloc_block_get_entry(dat, req->pr_entry_nr,
req->pr_entry_bh, kaddr);
entry->de_start = cpu_to_le64(nilfs_mdt_cno(dat));
- if (entry->de_blocknr != cpu_to_le64(0) ||
- entry->de_end != cpu_to_le64(NILFS_CNO_MAX)) {
- printk(KERN_CRIT
- "%s: vbn = %llu, start = %llu, end = %llu, pbn = %llu\n",
- __func__, (unsigned long long)req->pr_entry_nr,
- (unsigned long long)le64_to_cpu(entry->de_start),
- (unsigned long long)le64_to_cpu(entry->de_end),
- (unsigned long long)le64_to_cpu(entry->de_blocknr));
- }
entry->de_blocknr = cpu_to_le64(blocknr);
kunmap_atomic(kaddr, KM_USER0);
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 54100ac..1a4fa04 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -43,7 +43,6 @@
*/
#include <linux/pagemap.h>
-#include <linux/smp_lock.h>
#include "nilfs.h"
#include "page.h"
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 3d3ddb3..2dfd477 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -412,8 +412,10 @@
return 0; /* Do not request flush for shadow page cache */
if (!sb) {
writer = nilfs_get_writer(NILFS_MDT(inode)->mi_nilfs);
- if (!writer)
+ if (!writer) {
+ nilfs_put_writer(NILFS_MDT(inode)->mi_nilfs);
return -EROFS;
+ }
sb = writer->s_super;
}
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index aa97754..51ff3d0 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1829,26 +1829,13 @@
err = nilfs_segbuf_write(segbuf, &wi);
res = nilfs_segbuf_wait(segbuf, &wi);
- err = unlikely(err) ? : res;
- if (unlikely(err))
+ err = err ? : res;
+ if (err)
return err;
}
return 0;
}
-static int nilfs_page_has_uncleared_buffer(struct page *page)
-{
- struct buffer_head *head, *bh;
-
- head = bh = page_buffers(page);
- do {
- if (buffer_dirty(bh) && !list_empty(&bh->b_assoc_buffers))
- return 1;
- bh = bh->b_this_page;
- } while (bh != head);
- return 0;
-}
-
static void __nilfs_end_page_io(struct page *page, int err)
{
if (!err) {
@@ -1872,13 +1859,26 @@
if (!page)
return;
- if (buffer_nilfs_node(page_buffers(page)) &&
- nilfs_page_has_uncleared_buffer(page))
- /* For b-tree node pages, this function may be called twice
- or more because they might be split in a segment.
- This check assures that cleanup has been done for all
- buffers in a split btnode page. */
+ if (buffer_nilfs_node(page_buffers(page)) && !PageWriteback(page)) {
+ /*
+ * For b-tree node pages, this function may be called twice
+ * or more because they might be split in a segment.
+ */
+ if (PageDirty(page)) {
+ /*
+ * For pages holding split b-tree node buffers, dirty
+ * flag on the buffers may be cleared discretely.
+ * In that case, the page is once redirtied for
+ * remaining buffers, and it must be cancelled if
+ * all the buffers get cleaned later.
+ */
+ lock_page(page);
+ if (nilfs_page_buffers_clean(page))
+ __nilfs_clear_page_dirty(page);
+ unlock_page(page);
+ }
return;
+ }
__nilfs_end_page_io(page, err);
}
@@ -1940,7 +1940,7 @@
}
if (bh->b_page != fs_page) {
nilfs_end_page_io(fs_page, err);
- if (unlikely(fs_page == failed_page))
+ if (fs_page && fs_page == failed_page)
goto done;
fs_page = bh->b_page;
}
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 31dac7e..dffbb09 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -1,15 +1,5 @@
config FSNOTIFY
- bool "Filesystem notification backend"
- default y
- ---help---
- fsnotify is a backend for filesystem notification. fsnotify does
- not provide any userspace interface but does provide the basis
- needed for other notification schemes such as dnotify, inotify,
- and fanotify.
-
- Say Y here to enable fsnotify suport.
-
- If unsure, say Y.
+ def_bool n
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig
index 904ff8d..f9c1ca1 100644
--- a/fs/notify/dnotify/Kconfig
+++ b/fs/notify/dnotify/Kconfig
@@ -1,6 +1,6 @@
config DNOTIFY
bool "Dnotify support"
- depends on FSNOTIFY
+ select FSNOTIFY
default y
help
Dnotify is a directory-based per-fd file change notification system
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index ec2f7bd..037e878 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -159,7 +159,9 @@
if (!group->ops->should_send_event(group, to_tell, mask))
continue;
if (!event) {
- event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+ event = fsnotify_create_event(to_tell, mask, data,
+ data_is, file_name, cookie,
+ GFP_KERNEL);
/* shit, we OOM'd and now we can't tell, maybe
* someday someone else will want to do something
* here */
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 5356884..3e56dbf 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -15,7 +15,7 @@
config INOTIFY_USER
bool "Inotify support for userspace"
- depends on FSNOTIFY
+ select FSNOTIFY
default y
---help---
Say Y here to enable inotify support for userspace, including the
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ff231ad..f30d9bb 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -57,7 +57,6 @@
static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
struct kmem_cache *event_priv_cachep __read_mostly;
-static struct fsnotify_event *inotify_ignored_event;
/*
* When inotify registers a new group it increments this and uses that
@@ -296,12 +295,15 @@
static int inotify_release(struct inode *ignored, struct file *file)
{
struct fsnotify_group *group = file->private_data;
+ struct user_struct *user = group->inotify_data.user;
fsnotify_clear_marks_by_group(group);
/* free this group, matching get was inotify_init->fsnotify_obtain_group */
fsnotify_put_group(group);
+ atomic_dec(&user->inotify_devs);
+
return 0;
}
@@ -362,6 +364,17 @@
return error;
}
+static void inotify_remove_from_idr(struct fsnotify_group *group,
+ struct inotify_inode_mark_entry *ientry)
+{
+ struct idr *idr;
+
+ spin_lock(&group->inotify_data.idr_lock);
+ idr = &group->inotify_data.idr;
+ idr_remove(idr, ientry->wd);
+ spin_unlock(&group->inotify_data.idr_lock);
+ ientry->wd = -1;
+}
/*
* Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
* internal reference help on the mark because it is in the idr.
@@ -370,13 +383,19 @@
struct fsnotify_group *group)
{
struct inotify_inode_mark_entry *ientry;
+ struct fsnotify_event *ignored_event;
struct inotify_event_private_data *event_priv;
struct fsnotify_event_private_data *fsn_event_priv;
- struct idr *idr;
+
+ ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
+ FSNOTIFY_EVENT_NONE, NULL, 0,
+ GFP_NOFS);
+ if (!ignored_event)
+ return;
ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
- event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+ event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
if (unlikely(!event_priv))
goto skip_send_ignore;
@@ -385,7 +404,7 @@
fsn_event_priv->group = group;
event_priv->wd = ientry->wd;
- fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
+ fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
/* did the private data get added? */
if (list_empty(&fsn_event_priv->event_list))
@@ -393,14 +412,16 @@
skip_send_ignore:
+ /* matches the reference taken when the event was created */
+ fsnotify_put_event(ignored_event);
+
/* remove this entry from the idr */
- spin_lock(&group->inotify_data.idr_lock);
- idr = &group->inotify_data.idr;
- idr_remove(idr, ientry->wd);
- spin_unlock(&group->inotify_data.idr_lock);
+ inotify_remove_from_idr(group, ientry);
/* removed from idr, drop that reference */
fsnotify_put_mark(entry);
+
+ atomic_dec(&group->inotify_data.user->inotify_watches);
}
/* ding dong the mark is dead */
@@ -415,6 +436,7 @@
{
struct fsnotify_mark_entry *entry = NULL;
struct inotify_inode_mark_entry *ientry;
+ struct inotify_inode_mark_entry *tmp_ientry;
int ret = 0;
int add = (arg & IN_MASK_ADD);
__u32 mask;
@@ -425,54 +447,66 @@
if (unlikely(!mask))
return -EINVAL;
- ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
- if (unlikely(!ientry))
+ tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+ if (unlikely(!tmp_ientry))
return -ENOMEM;
/* we set the mask at the end after attaching it */
- fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
- ientry->wd = 0;
+ fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+ tmp_ientry->wd = -1;
find_entry:
spin_lock(&inode->i_lock);
entry = fsnotify_find_mark_entry(group, inode);
spin_unlock(&inode->i_lock);
if (entry) {
- kmem_cache_free(inotify_inode_mark_cachep, ientry);
ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
} else {
- if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
- ret = -ENOSPC;
+ ret = -ENOSPC;
+ if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
goto out_err;
- }
-
- ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
- if (ret == -EEXIST)
- goto find_entry;
- else if (ret)
- goto out_err;
-
- entry = &ientry->fsn_entry;
retry:
ret = -ENOMEM;
if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
goto out_err;
spin_lock(&group->inotify_data.idr_lock);
- /* if entry is added to the idr we keep the reference obtained
- * through fsnotify_mark_add. remember to drop this reference
- * when entry is removed from idr */
- ret = idr_get_new_above(&group->inotify_data.idr, entry,
- ++group->inotify_data.last_wd,
- &ientry->wd);
+ ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+ group->inotify_data.last_wd,
+ &tmp_ientry->wd);
spin_unlock(&group->inotify_data.idr_lock);
if (ret) {
if (ret == -EAGAIN)
goto retry;
goto out_err;
}
+
+ ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+ if (ret) {
+ inotify_remove_from_idr(group, tmp_ientry);
+ if (ret == -EEXIST)
+ goto find_entry;
+ goto out_err;
+ }
+
+ /* tmp_ientry has been added to the inode, so we are all set up.
+ * now we just need to make sure tmp_ientry doesn't get freed and
+ * we need to set up entry and ientry so the generic code can
+ * do its thing. */
+ ientry = tmp_ientry;
+ entry = &ientry->fsn_entry;
+ tmp_ientry = NULL;
+
atomic_inc(&group->inotify_data.user->inotify_watches);
+
+ /* update the idr hint */
+ group->inotify_data.last_wd = ientry->wd;
+
+ /* we put the mark on the idr, take a reference */
+ fsnotify_get_mark(entry);
}
+ ret = ientry->wd;
+
spin_lock(&entry->lock);
old_mask = entry->mask;
@@ -503,14 +537,19 @@
fsnotify_recalc_group_mask(group);
}
- return ientry->wd;
+ /* this either matches fsnotify_find_mark_entry, or init_mark_entry
+ * depending on which path we took... */
+ fsnotify_put_mark(entry);
out_err:
- /* see this isn't supposed to happen, just kill the watch */
- if (entry) {
- fsnotify_destroy_mark_by_entry(entry);
- fsnotify_put_mark(entry);
+ /* could be an error, could be that we found an existing mark */
+ if (tmp_ientry) {
+ /* on the idr but didn't make it on the inode */
+ if (tmp_ientry->wd != -1)
+ inotify_remove_from_idr(group, tmp_ientry);
+ kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
}
+
return ret;
}
@@ -718,9 +757,6 @@
inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
- inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
- if (!inotify_ignored_event)
- panic("unable to allocate the inotify ignored event\n");
inotify_max_queued_events = 16384;
inotify_max_user_instances = 128;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 959b73e..5213685 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -136,18 +136,24 @@
{
if ((old->mask == new->mask) &&
(old->to_tell == new->to_tell) &&
- (old->data_type == new->data_type)) {
+ (old->data_type == new->data_type) &&
+ (old->name_len == new->name_len)) {
switch (old->data_type) {
case (FSNOTIFY_EVENT_INODE):
- if (old->inode == new->inode)
+ /* remember, after old was put on the wait_q we aren't
+ * allowed to look at the inode any more, only thing
+ * left to check was if the file_name is the same */
+ if (old->name_len &&
+ !strcmp(old->file_name, new->file_name))
return true;
break;
case (FSNOTIFY_EVENT_PATH):
if ((old->path.mnt == new->path.mnt) &&
(old->path.dentry == new->path.dentry))
return true;
+ break;
case (FSNOTIFY_EVENT_NONE):
- return true;
+ return false;
};
}
return false;
@@ -339,18 +345,19 @@
* @name the filename, if available
*/
struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
- int data_type, const char *name, u32 cookie)
+ int data_type, const char *name, u32 cookie,
+ gfp_t gfp)
{
struct fsnotify_event *event;
- event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+ event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
if (!event)
return NULL;
initialize_event(event);
if (name) {
- event->file_name = kstrdup(name, GFP_KERNEL);
+ event->file_name = kstrdup(name, gfp);
if (!event->file_name) {
kmem_cache_free(fsnotify_event_cachep, event);
return NULL;
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 9edcde4..f9a3e89 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -1914,7 +1914,8 @@
* immediately to their right.
*/
left_clusters = le32_to_cpu(right_child_el->l_recs[0].e_cpos);
- if (ocfs2_is_empty_extent(&right_child_el->l_recs[0])) {
+ if (!ocfs2_rec_clusters(right_child_el, &right_child_el->l_recs[0])) {
+ BUG_ON(right_child_el->l_tree_depth);
BUG_ON(le16_to_cpu(right_child_el->l_next_free_rec) <= 1);
left_clusters = le32_to_cpu(right_child_el->l_recs[1].e_cpos);
}
@@ -2476,15 +2477,37 @@
return ret;
}
-static void ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
- struct ocfs2_path *path)
+static int ocfs2_update_edge_lengths(struct inode *inode, handle_t *handle,
+ int subtree_index, struct ocfs2_path *path)
{
- int i, idx;
+ int i, idx, ret;
struct ocfs2_extent_rec *rec;
struct ocfs2_extent_list *el;
struct ocfs2_extent_block *eb;
u32 range;
+ /*
+ * In normal tree rotation process, we will never touch the
+ * tree branch above subtree_index and ocfs2_extend_rotate_transaction
+ * doesn't reserve the credits for them either.
+ *
+ * But we do have a special case here which will update the rightmost
+ * records for all the bh in the path.
+ * So we have to allocate extra credits and access them.
+ */
+ ret = ocfs2_extend_trans(handle,
+ handle->h_buffer_credits + subtree_index);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_journal_access_path(inode, handle, path);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
/* Path should always be rightmost. */
eb = (struct ocfs2_extent_block *)path_leaf_bh(path)->b_data;
BUG_ON(eb->h_next_leaf_blk != 0ULL);
@@ -2505,6 +2528,8 @@
ocfs2_journal_dirty(handle, path->p_node[i].bh);
}
+out:
+ return ret;
}
static void ocfs2_unlink_path(struct inode *inode, handle_t *handle,
@@ -2717,7 +2742,12 @@
if (del_right_subtree) {
ocfs2_unlink_subtree(inode, handle, left_path, right_path,
subtree_index, dealloc);
- ocfs2_update_edge_lengths(inode, handle, left_path);
+ ret = ocfs2_update_edge_lengths(inode, handle, subtree_index,
+ left_path);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
eb = (struct ocfs2_extent_block *)path_leaf_bh(left_path)->b_data;
ocfs2_et_set_last_eb_blk(et, le64_to_cpu(eb->h_blkno));
@@ -3034,7 +3064,12 @@
ocfs2_unlink_subtree(inode, handle, left_path, path,
subtree_index, dealloc);
- ocfs2_update_edge_lengths(inode, handle, left_path);
+ ret = ocfs2_update_edge_lengths(inode, handle, subtree_index,
+ left_path);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
eb = (struct ocfs2_extent_block *)path_leaf_bh(left_path)->b_data;
ocfs2_et_set_last_eb_blk(et, le64_to_cpu(eb->h_blkno));
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index b2c52b3..b401654 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -193,6 +193,7 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno);
mlog(ML_ERROR, "Size %llu, clusters %u\n", (unsigned long long)i_size_read(inode), OCFS2_I(inode)->ip_clusters);
dump_stack();
+ goto bail;
}
past_eof = ocfs2_blocks_for_bytes(inode->i_sb, i_size_read(inode));
@@ -894,18 +895,17 @@
*/
unsigned c_new;
unsigned c_unwritten;
+ unsigned c_needs_zero;
};
-static inline int ocfs2_should_zero_cluster(struct ocfs2_write_cluster_desc *d)
-{
- return d->c_new || d->c_unwritten;
-}
-
struct ocfs2_write_ctxt {
/* Logical cluster position / len of write */
u32 w_cpos;
u32 w_clen;
+ /* First cluster allocated in a nonsparse extend */
+ u32 w_first_new_cpos;
+
struct ocfs2_write_cluster_desc w_desc[OCFS2_MAX_CLUSTERS_PER_PAGE];
/*
@@ -983,6 +983,7 @@
return -ENOMEM;
wc->w_cpos = pos >> osb->s_clustersize_bits;
+ wc->w_first_new_cpos = UINT_MAX;
cend = (pos + len - 1) >> osb->s_clustersize_bits;
wc->w_clen = cend - wc->w_cpos + 1;
get_bh(di_bh);
@@ -1217,20 +1218,18 @@
*/
static int ocfs2_write_cluster(struct address_space *mapping,
u32 phys, unsigned int unwritten,
+ unsigned int should_zero,
struct ocfs2_alloc_context *data_ac,
struct ocfs2_alloc_context *meta_ac,
struct ocfs2_write_ctxt *wc, u32 cpos,
loff_t user_pos, unsigned user_len)
{
- int ret, i, new, should_zero = 0;
+ int ret, i, new;
u64 v_blkno, p_blkno;
struct inode *inode = mapping->host;
struct ocfs2_extent_tree et;
new = phys == 0 ? 1 : 0;
- if (new || unwritten)
- should_zero = 1;
-
if (new) {
u32 tmp_pos;
@@ -1301,7 +1300,7 @@
if (tmpret) {
mlog_errno(tmpret);
if (ret == 0)
- tmpret = ret;
+ ret = tmpret;
}
}
@@ -1341,7 +1340,9 @@
local_len = osb->s_clustersize - cluster_off;
ret = ocfs2_write_cluster(mapping, desc->c_phys,
- desc->c_unwritten, data_ac, meta_ac,
+ desc->c_unwritten,
+ desc->c_needs_zero,
+ data_ac, meta_ac,
wc, desc->c_cpos, pos, local_len);
if (ret) {
mlog_errno(ret);
@@ -1391,14 +1392,14 @@
* newly allocated cluster.
*/
desc = &wc->w_desc[0];
- if (ocfs2_should_zero_cluster(desc))
+ if (desc->c_needs_zero)
ocfs2_figure_cluster_boundaries(osb,
desc->c_cpos,
&wc->w_target_from,
NULL);
desc = &wc->w_desc[wc->w_clen - 1];
- if (ocfs2_should_zero_cluster(desc))
+ if (desc->c_needs_zero)
ocfs2_figure_cluster_boundaries(osb,
desc->c_cpos,
NULL,
@@ -1466,13 +1467,28 @@
phys++;
}
+ /*
+ * If w_first_new_cpos is < UINT_MAX, we have a non-sparse
+ * file that got extended. w_first_new_cpos tells us
+ * where the newly allocated clusters are so we can
+ * zero them.
+ */
+ if (desc->c_cpos >= wc->w_first_new_cpos) {
+ BUG_ON(phys == 0);
+ desc->c_needs_zero = 1;
+ }
+
desc->c_phys = phys;
if (phys == 0) {
desc->c_new = 1;
+ desc->c_needs_zero = 1;
*clusters_to_alloc = *clusters_to_alloc + 1;
}
- if (ext_flags & OCFS2_EXT_UNWRITTEN)
+
+ if (ext_flags & OCFS2_EXT_UNWRITTEN) {
desc->c_unwritten = 1;
+ desc->c_needs_zero = 1;
+ }
num_clusters--;
}
@@ -1632,10 +1648,13 @@
if (newsize <= i_size_read(inode))
return 0;
- ret = ocfs2_extend_no_holes(inode, newsize, newsize - len);
+ ret = ocfs2_extend_no_holes(inode, newsize, pos);
if (ret)
mlog_errno(ret);
+ wc->w_first_new_cpos =
+ ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
+
return ret;
}
@@ -1644,7 +1663,7 @@
struct page **pagep, void **fsdata,
struct buffer_head *di_bh, struct page *mmap_page)
{
- int ret, credits = OCFS2_INODE_UPDATE_CREDITS;
+ int ret, cluster_of_pages, credits = OCFS2_INODE_UPDATE_CREDITS;
unsigned int clusters_to_alloc, extents_to_split;
struct ocfs2_write_ctxt *wc;
struct inode *inode = mapping->host;
@@ -1722,8 +1741,19 @@
}
- ocfs2_set_target_boundaries(osb, wc, pos, len,
- clusters_to_alloc + extents_to_split);
+ /*
+ * We have to zero sparse allocated clusters, unwritten extent clusters,
+ * and non-sparse clusters we just extended. For non-sparse writes,
+ * we know zeros will only be needed in the first and/or last cluster.
+ */
+ if (clusters_to_alloc || extents_to_split ||
+ wc->w_desc[0].c_needs_zero ||
+ wc->w_desc[wc->w_clen - 1].c_needs_zero)
+ cluster_of_pages = 1;
+ else
+ cluster_of_pages = 0;
+
+ ocfs2_set_target_boundaries(osb, wc, pos, len, cluster_of_pages);
handle = ocfs2_start_trans(osb, credits);
if (IS_ERR(handle)) {
@@ -1756,8 +1786,7 @@
* extent.
*/
ret = ocfs2_grab_pages_for_write(mapping, wc, wc->w_cpos, pos,
- clusters_to_alloc + extents_to_split,
- mmap_page);
+ cluster_of_pages, mmap_page);
if (ret) {
mlog_errno(ret);
goto out_quota;
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index b574431..2f28b7d 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -310,22 +310,19 @@
return ret;
}
-static DEFINE_SPINLOCK(dentry_list_lock);
+DEFINE_SPINLOCK(dentry_list_lock);
/* We limit the number of dentry locks to drop in one go. We have
* this limit so that we don't starve other users of ocfs2_wq. */
#define DL_INODE_DROP_COUNT 64
/* Drop inode references from dentry locks */
-void ocfs2_drop_dl_inodes(struct work_struct *work)
+static void __ocfs2_drop_dl_inodes(struct ocfs2_super *osb, int drop_count)
{
- struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
- dentry_lock_work);
struct ocfs2_dentry_lock *dl;
- int drop_count = DL_INODE_DROP_COUNT;
spin_lock(&dentry_list_lock);
- while (osb->dentry_lock_list && drop_count--) {
+ while (osb->dentry_lock_list && (drop_count < 0 || drop_count--)) {
dl = osb->dentry_lock_list;
osb->dentry_lock_list = dl->dl_next;
spin_unlock(&dentry_list_lock);
@@ -333,11 +330,32 @@
kfree(dl);
spin_lock(&dentry_list_lock);
}
- if (osb->dentry_lock_list)
+ spin_unlock(&dentry_list_lock);
+}
+
+void ocfs2_drop_dl_inodes(struct work_struct *work)
+{
+ struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
+ dentry_lock_work);
+
+ __ocfs2_drop_dl_inodes(osb, DL_INODE_DROP_COUNT);
+ /*
+ * Don't queue dropping if umount is in progress. We flush the
+ * list in ocfs2_dismount_volume
+ */
+ spin_lock(&dentry_list_lock);
+ if (osb->dentry_lock_list &&
+ !ocfs2_test_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED))
queue_work(ocfs2_wq, &osb->dentry_lock_work);
spin_unlock(&dentry_list_lock);
}
+/* Flush the whole work queue */
+void ocfs2_drop_all_dl_inodes(struct ocfs2_super *osb)
+{
+ __ocfs2_drop_dl_inodes(osb, -1);
+}
+
/*
* ocfs2_dentry_iput() and friends.
*
@@ -368,7 +386,8 @@
/* We leave dropping of inode reference to ocfs2_wq as that can
* possibly lead to inode deletion which gets tricky */
spin_lock(&dentry_list_lock);
- if (!osb->dentry_lock_list)
+ if (!osb->dentry_lock_list &&
+ !ocfs2_test_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED))
queue_work(ocfs2_wq, &osb->dentry_lock_work);
dl->dl_next = osb->dentry_lock_list;
osb->dentry_lock_list = dl;
diff --git a/fs/ocfs2/dcache.h b/fs/ocfs2/dcache.h
index faa12e7..f5dd178 100644
--- a/fs/ocfs2/dcache.h
+++ b/fs/ocfs2/dcache.h
@@ -49,10 +49,13 @@
int ocfs2_dentry_attach_lock(struct dentry *dentry, struct inode *inode,
u64 parent_blkno);
+extern spinlock_t dentry_list_lock;
+
void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
struct ocfs2_dentry_lock *dl);
void ocfs2_drop_dl_inodes(struct work_struct *work);
+void ocfs2_drop_all_dl_inodes(struct ocfs2_super *osb);
struct dentry *ocfs2_find_local_alias(struct inode *inode, u64 parent_blkno,
int skip_unhashed);
diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c
index d07ddbe..81eff8e 100644
--- a/fs/ocfs2/dlm/dlmast.c
+++ b/fs/ocfs2/dlm/dlmast.c
@@ -103,7 +103,6 @@
lock->ast_pending, lock->ml.type);
BUG();
}
- BUG_ON(!list_empty(&lock->ast_list));
if (lock->ast_pending)
mlog(0, "lock has an ast getting flushed right now\n");
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index bcb9260..43e6e32 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -1118,7 +1118,7 @@
mlog(0, "%s:%.*s: sending mig lockres (%s) to %u\n",
dlm->name, res->lockname.len, res->lockname.name,
- orig_flags & DLM_MRES_MIGRATION ? "migrate" : "recovery",
+ orig_flags & DLM_MRES_MIGRATION ? "migration" : "recovery",
send_to);
/* send it */
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 62442e4..aa501d3 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1851,6 +1851,7 @@
if (ret)
goto out_dio;
+ count = ocount;
ret = generic_write_checks(file, ppos, &count,
S_ISBLK(inode->i_mode));
if (ret)
@@ -1918,8 +1919,10 @@
mutex_unlock(&inode->i_mutex);
+ if (written)
+ ret = written;
mlog_exit(ret);
- return written ? written : ret;
+ return ret;
}
static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index 9fcd36d..467b413 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -7,7 +7,6 @@
#include <linux/fs.h>
#include <linux/mount.h>
-#include <linux/smp_lock.h>
#define MLOG_MASK_PREFIX ML_INODE
#include <cluster/masklog.h>
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index f033760..c48b93a 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1954,10 +1954,16 @@
os->os_osb = osb;
os->os_count = 0;
os->os_seqno = 0;
- os->os_scantime = CURRENT_TIME;
mutex_init(&os->os_lock);
INIT_DELAYED_WORK(&os->os_orphan_scan_work, ocfs2_orphan_scan_work);
+}
+void ocfs2_orphan_scan_start(struct ocfs2_super *osb)
+{
+ struct ocfs2_orphan_scan *os;
+
+ os = &osb->osb_orphan_scan;
+ os->os_scantime = CURRENT_TIME;
if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb))
atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
else {
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 5432c7f..2c3222a 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -145,6 +145,7 @@
/* Exported only for the journal struct init code in super.c. Do not call. */
void ocfs2_orphan_scan_init(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_start(struct ocfs2_super *osb);
void ocfs2_orphan_scan_stop(struct ocfs2_super *osb);
void ocfs2_orphan_scan_exit(struct ocfs2_super *osb);
@@ -329,20 +330,27 @@
/* extended attribute block update */
#define OCFS2_XATTR_BLOCK_UPDATE_CREDITS 1
-/* global quotafile inode update, data block */
-#define OCFS2_QINFO_WRITE_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1)
+/* Update of a single quota block */
+#define OCFS2_QUOTA_BLOCK_UPDATE_CREDITS 1
+/* global quotafile inode update, data block */
+#define OCFS2_QINFO_WRITE_CREDITS (OCFS2_INODE_UPDATE_CREDITS + \
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
+
+#define OCFS2_LOCAL_QINFO_WRITE_CREDITS OCFS2_QUOTA_BLOCK_UPDATE_CREDITS
/*
* The two writes below can accidentally see global info dirty due
* to set_info() quotactl so make them prepared for the writes.
*/
/* quota data block, global info */
/* Write to local quota file */
-#define OCFS2_QWRITE_CREDITS (OCFS2_QINFO_WRITE_CREDITS + 1)
+#define OCFS2_QWRITE_CREDITS (OCFS2_QINFO_WRITE_CREDITS + \
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
/* global quota data block, local quota data block, global quota inode,
* global quota info */
-#define OCFS2_QSYNC_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 3)
+#define OCFS2_QSYNC_CREDITS (OCFS2_QINFO_WRITE_CREDITS + \
+ 2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS)
static inline int ocfs2_quota_trans_credits(struct super_block *sb)
{
@@ -355,11 +363,6 @@
return credits;
}
-/* Number of credits needed for removing quota structure from file */
-int ocfs2_calc_qdel_credits(struct super_block *sb, int type);
-/* Number of credits needed for initialization of new quota structure */
-int ocfs2_calc_qinit_credits(struct super_block *sb, int type);
-
/* group extend. inode update and last group update. */
#define OCFS2_GROUP_EXTEND_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1)
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index c9345eb..39e1d5a 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -224,10 +224,12 @@
OCFS2_MOUNT_GRPQUOTA = 1 << 10, /* We support group quotas */
};
-#define OCFS2_OSB_SOFT_RO 0x0001
-#define OCFS2_OSB_HARD_RO 0x0002
-#define OCFS2_OSB_ERROR_FS 0x0004
-#define OCFS2_DEFAULT_ATIME_QUANTUM 60
+#define OCFS2_OSB_SOFT_RO 0x0001
+#define OCFS2_OSB_HARD_RO 0x0002
+#define OCFS2_OSB_ERROR_FS 0x0004
+#define OCFS2_OSB_DROP_DENTRY_LOCK_IMMED 0x0008
+
+#define OCFS2_DEFAULT_ATIME_QUANTUM 60
struct ocfs2_journal;
struct ocfs2_slot_info;
@@ -490,6 +492,18 @@
spin_unlock(&osb->osb_lock);
}
+
+static inline unsigned long ocfs2_test_osb_flag(struct ocfs2_super *osb,
+ unsigned long flag)
+{
+ unsigned long ret;
+
+ spin_lock(&osb->osb_lock);
+ ret = osb->osb_flags & flag;
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
static inline void ocfs2_set_ro_flag(struct ocfs2_super *osb,
int hard)
{
diff --git a/fs/ocfs2/quota.h b/fs/ocfs2/quota.h
index 7365e2e..3fb96fcd 100644
--- a/fs/ocfs2/quota.h
+++ b/fs/ocfs2/quota.h
@@ -50,7 +50,6 @@
unsigned int dqi_chunks; /* Number of chunks in local quota file */
unsigned int dqi_blocks; /* Number of blocks allocated for local quota file */
unsigned int dqi_syncms; /* How often should we sync with other nodes */
- unsigned int dqi_syncjiff; /* Precomputed dqi_syncms in jiffies */
struct list_head dqi_chunk; /* List of chunks */
struct inode *dqi_gqinode; /* Global quota file inode */
struct ocfs2_lock_res dqi_gqlock; /* Lock protecting quota information structure */
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index edfa60c..bf7742d 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -69,6 +69,7 @@
d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
d->dqb_btime = cpu_to_le64(m->dqb_btime);
d->dqb_itime = cpu_to_le64(m->dqb_itime);
+ d->dqb_pad1 = d->dqb_pad2 = 0;
}
static int ocfs2_global_is_id(void *dp, struct dquot *dquot)
@@ -211,14 +212,13 @@
mutex_lock_nested(&gqinode->i_mutex, I_MUTEX_QUOTA);
if (gqinode->i_size < off + len) {
- down_write(&OCFS2_I(gqinode)->ip_alloc_sem);
- err = ocfs2_extend_no_holes(gqinode, off + len, off);
- up_write(&OCFS2_I(gqinode)->ip_alloc_sem);
- if (err < 0)
- goto out;
+ loff_t rounded_end =
+ ocfs2_align_bytes_to_blocks(sb, off + len);
+
+ /* Space is already allocated in ocfs2_global_read_dquot() */
err = ocfs2_simple_size_update(gqinode,
oinfo->dqi_gqi_bh,
- off + len);
+ rounded_end);
if (err < 0)
goto out;
new = 1;
@@ -234,7 +234,7 @@
}
if (err) {
mlog_errno(err);
- return err;
+ goto out;
}
lock_buffer(bh);
if (new)
@@ -342,7 +342,6 @@
info->dqi_bgrace = le32_to_cpu(dinfo.dqi_bgrace);
info->dqi_igrace = le32_to_cpu(dinfo.dqi_igrace);
oinfo->dqi_syncms = le32_to_cpu(dinfo.dqi_syncms);
- oinfo->dqi_syncjiff = msecs_to_jiffies(oinfo->dqi_syncms);
oinfo->dqi_gi.dqi_blocks = le32_to_cpu(dinfo.dqi_blocks);
oinfo->dqi_gi.dqi_free_blk = le32_to_cpu(dinfo.dqi_free_blk);
oinfo->dqi_gi.dqi_free_entry = le32_to_cpu(dinfo.dqi_free_entry);
@@ -352,7 +351,7 @@
oinfo->dqi_gi.dqi_qtree_depth = qtree_depth(&oinfo->dqi_gi);
INIT_DELAYED_WORK(&oinfo->dqi_sync_work, qsync_work_fn);
queue_delayed_work(ocfs2_quota_wq, &oinfo->dqi_sync_work,
- oinfo->dqi_syncjiff);
+ msecs_to_jiffies(oinfo->dqi_syncms));
out_err:
mlog_exit(status);
@@ -402,13 +401,36 @@
return err;
}
+static int ocfs2_global_qinit_alloc(struct super_block *sb, int type)
+{
+ struct ocfs2_mem_dqinfo *oinfo = sb_dqinfo(sb, type)->dqi_priv;
+
+ /*
+ * We may need to allocate tree blocks and a leaf block but not the
+ * root block
+ */
+ return oinfo->dqi_gi.dqi_qtree_depth;
+}
+
+static int ocfs2_calc_global_qinit_credits(struct super_block *sb, int type)
+{
+ /* We modify all the allocated blocks, tree root, and info block */
+ return (ocfs2_global_qinit_alloc(sb, type) + 2) *
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS;
+}
+
/* Read in information from global quota file and acquire a reference to it.
* dquot_acquire() has already started the transaction and locked quota file */
int ocfs2_global_read_dquot(struct dquot *dquot)
{
int err, err2, ex = 0;
- struct ocfs2_mem_dqinfo *info =
- sb_dqinfo(dquot->dq_sb, dquot->dq_type)->dqi_priv;
+ struct super_block *sb = dquot->dq_sb;
+ int type = dquot->dq_type;
+ struct ocfs2_mem_dqinfo *info = sb_dqinfo(sb, type)->dqi_priv;
+ struct ocfs2_super *osb = OCFS2_SB(sb);
+ struct inode *gqinode = info->dqi_gqinode;
+ int need_alloc = ocfs2_global_qinit_alloc(sb, type);
+ handle_t *handle = NULL;
err = ocfs2_qinfo_lock(info, 0);
if (err < 0)
@@ -419,14 +441,33 @@
OCFS2_DQUOT(dquot)->dq_use_count++;
OCFS2_DQUOT(dquot)->dq_origspace = dquot->dq_dqb.dqb_curspace;
OCFS2_DQUOT(dquot)->dq_originodes = dquot->dq_dqb.dqb_curinodes;
+ ocfs2_qinfo_unlock(info, 0);
+
if (!dquot->dq_off) { /* No real quota entry? */
- /* Upgrade to exclusive lock for allocation */
- ocfs2_qinfo_unlock(info, 0);
- err = ocfs2_qinfo_lock(info, 1);
- if (err < 0)
- goto out_qlock;
ex = 1;
+ /*
+ * Add blocks to quota file before we start a transaction since
+ * locking allocators ranks above a transaction start
+ */
+ WARN_ON(journal_current_handle());
+ down_write(&OCFS2_I(gqinode)->ip_alloc_sem);
+ err = ocfs2_extend_no_holes(gqinode,
+ gqinode->i_size + (need_alloc << sb->s_blocksize_bits),
+ gqinode->i_size);
+ up_write(&OCFS2_I(gqinode)->ip_alloc_sem);
+ if (err < 0)
+ goto out;
}
+
+ handle = ocfs2_start_trans(osb,
+ ocfs2_calc_global_qinit_credits(sb, type));
+ if (IS_ERR(handle)) {
+ err = PTR_ERR(handle);
+ goto out;
+ }
+ err = ocfs2_qinfo_lock(info, ex);
+ if (err < 0)
+ goto out_trans;
err = qtree_write_dquot(&info->dqi_gi, dquot);
if (ex && info_dirty(sb_dqinfo(dquot->dq_sb, dquot->dq_type))) {
err2 = __ocfs2_global_write_info(dquot->dq_sb, dquot->dq_type);
@@ -438,6 +479,9 @@
ocfs2_qinfo_unlock(info, 1);
else
ocfs2_qinfo_unlock(info, 0);
+out_trans:
+ if (handle)
+ ocfs2_commit_trans(osb, handle);
out:
if (err < 0)
mlog_errno(err);
@@ -607,7 +651,7 @@
dquot_scan_active(sb, ocfs2_sync_dquot_helper, oinfo->dqi_type);
queue_delayed_work(ocfs2_quota_wq, &oinfo->dqi_sync_work,
- oinfo->dqi_syncjiff);
+ msecs_to_jiffies(oinfo->dqi_syncms));
}
/*
@@ -635,20 +679,18 @@
return status;
}
-int ocfs2_calc_qdel_credits(struct super_block *sb, int type)
+static int ocfs2_calc_qdel_credits(struct super_block *sb, int type)
{
- struct ocfs2_mem_dqinfo *oinfo;
- int features[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
- OCFS2_FEATURE_RO_COMPAT_GRPQUOTA };
-
- if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, features[type]))
- return 0;
-
- oinfo = sb_dqinfo(sb, type)->dqi_priv;
- /* We modify tree, leaf block, global info, local chunk header,
- * global and local inode */
- return oinfo->dqi_gi.dqi_qtree_depth + 2 + 1 +
- 2 * OCFS2_INODE_UPDATE_CREDITS;
+ struct ocfs2_mem_dqinfo *oinfo = sb_dqinfo(sb, type)->dqi_priv;
+ /*
+ * We modify tree, leaf block, global info, local chunk header,
+ * global and local inode; OCFS2_QINFO_WRITE_CREDITS already
+ * accounts for inode update
+ */
+ return (oinfo->dqi_gi.dqi_qtree_depth + 2) *
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS +
+ OCFS2_QINFO_WRITE_CREDITS +
+ OCFS2_INODE_UPDATE_CREDITS;
}
static int ocfs2_release_dquot(struct dquot *dquot)
@@ -680,33 +722,10 @@
return status;
}
-int ocfs2_calc_qinit_credits(struct super_block *sb, int type)
-{
- struct ocfs2_mem_dqinfo *oinfo;
- int features[MAXQUOTAS] = { OCFS2_FEATURE_RO_COMPAT_USRQUOTA,
- OCFS2_FEATURE_RO_COMPAT_GRPQUOTA };
- struct ocfs2_dinode *lfe, *gfe;
-
- if (!OCFS2_HAS_RO_COMPAT_FEATURE(sb, features[type]))
- return 0;
-
- oinfo = sb_dqinfo(sb, type)->dqi_priv;
- gfe = (struct ocfs2_dinode *)oinfo->dqi_gqi_bh->b_data;
- lfe = (struct ocfs2_dinode *)oinfo->dqi_lqi_bh->b_data;
- /* We can extend local file + global file. In local file we
- * can modify info, chunk header block and dquot block. In
- * global file we can modify info, tree and leaf block */
- return ocfs2_calc_extend_credits(sb, &lfe->id2.i_list, 0) +
- ocfs2_calc_extend_credits(sb, &gfe->id2.i_list, 0) +
- 3 + oinfo->dqi_gi.dqi_qtree_depth + 2;
-}
-
static int ocfs2_acquire_dquot(struct dquot *dquot)
{
- handle_t *handle;
struct ocfs2_mem_dqinfo *oinfo =
sb_dqinfo(dquot->dq_sb, dquot->dq_type)->dqi_priv;
- struct ocfs2_super *osb = OCFS2_SB(dquot->dq_sb);
int status = 0;
mlog_entry("id=%u, type=%d", dquot->dq_id, dquot->dq_type);
@@ -715,16 +734,7 @@
status = ocfs2_lock_global_qf(oinfo, 1);
if (status < 0)
goto out;
- handle = ocfs2_start_trans(osb,
- ocfs2_calc_qinit_credits(dquot->dq_sb, dquot->dq_type));
- if (IS_ERR(handle)) {
- status = PTR_ERR(handle);
- mlog_errno(status);
- goto out_ilock;
- }
status = dquot_acquire(dquot);
- ocfs2_commit_trans(osb, handle);
-out_ilock:
ocfs2_unlock_global_qf(oinfo, 1);
out:
mlog_exit(status);
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index 5a460fa..bdb09cb 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -20,6 +20,7 @@
#include "sysfile.h"
#include "dlmglue.h"
#include "quota.h"
+#include "uptodate.h"
/* Number of local quota structures per block */
static inline unsigned int ol_quota_entries_per_block(struct super_block *sb)
@@ -100,7 +101,8 @@
handle_t *handle;
int status;
- handle = ocfs2_start_trans(OCFS2_SB(sb), 1);
+ handle = ocfs2_start_trans(OCFS2_SB(sb),
+ OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
@@ -610,7 +612,8 @@
goto out_bh;
/* Mark quota file as clean if we are recovering quota file of
* some other node. */
- handle = ocfs2_start_trans(osb, 1);
+ handle = ocfs2_start_trans(osb,
+ OCFS2_LOCAL_QINFO_WRITE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
@@ -940,7 +943,7 @@
struct ocfs2_local_disk_chunk *dchunk;
int status;
handle_t *handle;
- struct buffer_head *bh = NULL;
+ struct buffer_head *bh = NULL, *dbh = NULL;
u64 p_blkno;
/* We are protected by dqio_sem so no locking needed */
@@ -964,32 +967,35 @@
mlog_errno(status);
goto out;
}
-
- down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
- status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
- &p_blkno, NULL, NULL);
- up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
- if (status < 0) {
- mlog_errno(status);
- goto out;
- }
- bh = sb_getblk(sb, p_blkno);
- if (!bh) {
- status = -ENOMEM;
- mlog_errno(status);
- goto out;
- }
- dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data;
-
- handle = ocfs2_start_trans(OCFS2_SB(sb), 2);
+ /* Local quota info and two new blocks we initialize */
+ handle = ocfs2_start_trans(OCFS2_SB(sb),
+ OCFS2_LOCAL_QINFO_WRITE_CREDITS +
+ 2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
goto out;
}
+ /* Initialize chunk header */
+ down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
+ &p_blkno, NULL, NULL);
+ up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ bh = sb_getblk(sb, p_blkno);
+ if (!bh) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto out_trans;
+ }
+ dchunk = (struct ocfs2_local_disk_chunk *)bh->b_data;
+ ocfs2_set_new_buffer_uptodate(lqinode, bh);
status = ocfs2_journal_access_dq(handle, lqinode, bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
+ OCFS2_JOURNAL_ACCESS_CREATE);
if (status < 0) {
mlog_errno(status);
goto out_trans;
@@ -999,7 +1005,6 @@
memset(dchunk->dqc_bitmap, 0,
sb->s_blocksize - sizeof(struct ocfs2_local_disk_chunk) -
OCFS2_QBLK_RESERVED_SPACE);
- set_buffer_uptodate(bh);
unlock_buffer(bh);
status = ocfs2_journal_dirty(handle, bh);
if (status < 0) {
@@ -1007,6 +1012,38 @@
goto out_trans;
}
+ /* Initialize new block with structures */
+ down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks + 1,
+ &p_blkno, NULL, NULL);
+ up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ dbh = sb_getblk(sb, p_blkno);
+ if (!dbh) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto out_trans;
+ }
+ ocfs2_set_new_buffer_uptodate(lqinode, dbh);
+ status = ocfs2_journal_access_dq(handle, lqinode, dbh,
+ OCFS2_JOURNAL_ACCESS_CREATE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ lock_buffer(dbh);
+ memset(dbh->b_data, 0, sb->s_blocksize - OCFS2_QBLK_RESERVED_SPACE);
+ unlock_buffer(dbh);
+ status = ocfs2_journal_dirty(handle, dbh);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+
+ /* Update local quotafile info */
oinfo->dqi_blocks += 2;
oinfo->dqi_chunks++;
status = ocfs2_local_write_info(sb, type);
@@ -1031,6 +1068,7 @@
ocfs2_commit_trans(OCFS2_SB(sb), handle);
out:
brelse(bh);
+ brelse(dbh);
kmem_cache_free(ocfs2_qf_chunk_cachep, chunk);
return ERR_PTR(status);
}
@@ -1048,6 +1086,8 @@
struct ocfs2_local_disk_chunk *dchunk;
int epb = ol_quota_entries_per_block(sb);
unsigned int chunk_blocks;
+ struct buffer_head *bh;
+ u64 p_blkno;
int status;
handle_t *handle;
@@ -1075,12 +1115,49 @@
mlog_errno(status);
goto out;
}
- handle = ocfs2_start_trans(OCFS2_SB(sb), 2);
+
+ /* Get buffer from the just added block */
+ down_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ status = ocfs2_extent_map_get_blocks(lqinode, oinfo->dqi_blocks,
+ &p_blkno, NULL, NULL);
+ up_read(&OCFS2_I(lqinode)->ip_alloc_sem);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out;
+ }
+ bh = sb_getblk(sb, p_blkno);
+ if (!bh) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto out;
+ }
+ ocfs2_set_new_buffer_uptodate(lqinode, bh);
+
+ /* Local quota info, chunk header and the new block we initialize */
+ handle = ocfs2_start_trans(OCFS2_SB(sb),
+ OCFS2_LOCAL_QINFO_WRITE_CREDITS +
+ 2 * OCFS2_QUOTA_BLOCK_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
mlog_errno(status);
goto out;
}
+ /* Zero created block */
+ status = ocfs2_journal_access_dq(handle, lqinode, bh,
+ OCFS2_JOURNAL_ACCESS_CREATE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ lock_buffer(bh);
+ memset(bh->b_data, 0, sb->s_blocksize);
+ unlock_buffer(bh);
+ status = ocfs2_journal_dirty(handle, bh);
+ if (status < 0) {
+ mlog_errno(status);
+ goto out_trans;
+ }
+ /* Update chunk header */
status = ocfs2_journal_access_dq(handle, lqinode, chunk->qc_headerbh,
OCFS2_JOURNAL_ACCESS_WRITE);
if (status < 0) {
@@ -1097,6 +1174,7 @@
mlog_errno(status);
goto out_trans;
}
+ /* Update file header */
oinfo->dqi_blocks++;
status = ocfs2_local_write_info(sb, type);
if (status < 0) {
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index 3f661376..e49c410 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -17,6 +17,7 @@
* General Public License for more details.
*/
+#include <linux/kernel.h>
#include <linux/crc32.h>
#include <linux/module.h>
@@ -153,7 +154,7 @@
static int dlm_status_to_errno(enum dlm_status status)
{
- BUG_ON(status > (sizeof(status_map) / sizeof(status_map[0])));
+ BUG_ON(status < 0 || status >= ARRAY_SIZE(status_map));
return status_map[status];
}
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 7efb349..b0ee0fd 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -777,6 +777,7 @@
}
di = (struct ocfs2_dinode *) (*bh)->b_data;
memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
+ spin_lock_init(&stats->b_lock);
status = ocfs2_verify_volume(di, *bh, blksize, stats);
if (status >= 0)
goto bail;
@@ -1182,7 +1183,7 @@
wake_up(&osb->osb_mount_event);
/* Start this when the mount is almost sure of being successful */
- ocfs2_orphan_scan_init(osb);
+ ocfs2_orphan_scan_start(osb);
mlog_exit(status);
return status;
@@ -1213,14 +1214,27 @@
mnt);
}
+static void ocfs2_kill_sb(struct super_block *sb)
+{
+ struct ocfs2_super *osb = OCFS2_SB(sb);
+
+ /* Prevent further queueing of inode drop events */
+ spin_lock(&dentry_list_lock);
+ ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED);
+ spin_unlock(&dentry_list_lock);
+ /* Wait for work to finish and/or remove it */
+ cancel_work_sync(&osb->dentry_lock_work);
+
+ kill_block_super(sb);
+}
+
static struct file_system_type ocfs2_fs_type = {
.owner = THIS_MODULE,
.name = "ocfs2",
.get_sb = ocfs2_get_sb, /* is this called when we mount
* the fs? */
- .kill_sb = kill_block_super, /* set to the generic one
- * right now, but do we
- * need to change that? */
+ .kill_sb = ocfs2_kill_sb,
+
.fs_flags = FS_REQUIRES_DEV|FS_RENAME_DOES_D_MOVE,
.next = NULL
};
@@ -1819,6 +1833,12 @@
debugfs_remove(osb->osb_ctxt);
+ /*
+ * Flush inode dropping work queue so that deletes are
+ * performed while the filesystem is still working
+ */
+ ocfs2_drop_all_dl_inodes(osb);
+
/* Orphan scan should be stopped as early as possible */
ocfs2_orphan_scan_stop(osb);
@@ -1981,6 +2001,8 @@
snprintf(osb->dev_str, sizeof(osb->dev_str), "%u,%u",
MAJOR(osb->sb->s_dev), MINOR(osb->sb->s_dev));
+ ocfs2_orphan_scan_init(osb);
+
status = ocfs2_recovery_init(osb);
if (status) {
mlog(ML_ERROR, "Unable to initialize recovery state\n");
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index ba320e2..d1a27cd 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -1052,7 +1052,8 @@
struct ocfs2_xattr_block *xb;
struct ocfs2_xattr_value_root *xv;
size_t size;
- int ret = -ENODATA, name_offset, name_len, block_off, i;
+ int ret = -ENODATA, name_offset, name_len, i;
+ int uninitialized_var(block_off);
xs->bucket = ocfs2_xattr_bucket_new(inode);
if (!xs->bucket) {
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 1a9c787..ea4e6cb 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -436,7 +436,7 @@
rcu_assign_pointer(ptbl->part[partno], p);
/* suppress uevent if the disk supresses it */
- if (!dev_get_uevent_suppress(pdev))
+ if (!dev_get_uevent_suppress(ddev))
kobject_uevent(&pdev->kobj, KOBJ_ADD);
return p;
diff --git a/fs/pipe.c b/fs/pipe.c
index f7dd21a..52c4151 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -68,8 +68,8 @@
pipe_lock_nested(pipe1, I_MUTEX_PARENT);
pipe_lock_nested(pipe2, I_MUTEX_CHILD);
} else {
- pipe_lock_nested(pipe2, I_MUTEX_CHILD);
- pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe2, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe1, I_MUTEX_CHILD);
}
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 3ce5ae9e..175db25 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -234,23 +234,20 @@
struct mm_struct *mm_for_maps(struct task_struct *task)
{
- struct mm_struct *mm = get_task_mm(task);
- if (!mm)
+ struct mm_struct *mm;
+
+ if (mutex_lock_killable(&task->cred_guard_mutex))
return NULL;
- down_read(&mm->mmap_sem);
- task_lock(task);
- if (task->mm != mm)
- goto out;
- if (task->mm != current->mm &&
- __ptrace_may_access(task, PTRACE_MODE_READ) < 0)
- goto out;
- task_unlock(task);
+
+ mm = get_task_mm(task);
+ if (mm && mm != current->mm &&
+ !ptrace_may_access(task, PTRACE_MODE_READ)) {
+ mmput(mm);
+ mm = NULL;
+ }
+ mutex_unlock(&task->cred_guard_mutex);
+
return mm;
-out:
- task_unlock(task);
- up_read(&mm->mmap_sem);
- mmput(mm);
- return NULL;
}
static int proc_pid_cmdline(struct task_struct *task, char * buffer)
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 6f61b7c..9bd8be1 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -119,6 +119,7 @@
mm = mm_for_maps(priv->task);
if (!mm)
return NULL;
+ down_read(&mm->mmap_sem);
tail_vma = get_gate_vma(priv->task);
priv->tail_vma = tail_vma;
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 64a72e2..8f5c05d 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -189,6 +189,7 @@
priv->task = NULL;
return NULL;
}
+ down_read(&mm->mmap_sem);
/* start from the Nth VMA */
for (p = rb_first(&mm->mm_rb); p; p = rb_next(p))
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 607c579..38f7bd5 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2042,7 +2042,6 @@
* changes */
invalidate_bdev(sb->s_bdev);
}
- mutex_lock(&inode->i_mutex);
mutex_lock(&dqopt->dqonoff_mutex);
if (sb_has_quota_loaded(sb, type)) {
error = -EBUSY;
@@ -2054,9 +2053,11 @@
* possible) Also nobody should write to the file - we use
* special IO operations which ignore the immutable bit. */
down_write(&dqopt->dqptr_sem);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
oldflags = inode->i_flags & (S_NOATIME | S_IMMUTABLE |
S_NOQUOTA);
inode->i_flags |= S_NOQUOTA | S_NOATIME | S_IMMUTABLE;
+ mutex_unlock(&inode->i_mutex);
up_write(&dqopt->dqptr_sem);
sb->dq_op->drop(inode);
}
@@ -2080,7 +2081,6 @@
goto out_file_init;
}
mutex_unlock(&dqopt->dqio_mutex);
- mutex_unlock(&inode->i_mutex);
spin_lock(&dq_state_lock);
dqopt->flags |= dquot_state_flag(flags, type);
spin_unlock(&dq_state_lock);
@@ -2094,16 +2094,17 @@
dqopt->files[type] = NULL;
iput(inode);
out_lock:
- mutex_unlock(&dqopt->dqonoff_mutex);
if (oldflags != -1) {
down_write(&dqopt->dqptr_sem);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
/* Set the flags back (in the case of accidental quotaon()
* on a wrong file we don't want to mess up the flags) */
inode->i_flags &= ~(S_NOATIME | S_NOQUOTA | S_IMMUTABLE);
inode->i_flags |= oldflags;
+ mutex_unlock(&inode->i_mutex);
up_write(&dqopt->dqptr_sem);
}
- mutex_unlock(&inode->i_mutex);
+ mutex_unlock(&dqopt->dqonoff_mutex);
out_fmt:
put_quota_format(fmt);
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index ebb2c41..11f0c06 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -20,6 +20,7 @@
#include <linux/ramfs.h>
#include <linux/pagevec.h>
#include <linux/mman.h>
+#include <linux/sched.h>
#include <asm/uaccess.h>
#include "internal.h"
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 77f5bb7..9062220 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -997,7 +997,7 @@
DEFINE_WAIT(wait);
struct reiserfs_journal *j = SB_JOURNAL(s);
if (atomic_read(&j->j_async_throttle))
- congestion_wait(WRITE, HZ / 10);
+ congestion_wait(BLK_RW_ASYNC, HZ / 10);
return 0;
}
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index d3aeb06..7adea74 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -24,7 +24,6 @@
#include <linux/exportfs.h>
#include <linux/quotaops.h>
#include <linux/vfs.h>
-#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/crc32.h>
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f3d47d8..6925b83 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -46,7 +46,6 @@
#include <linux/reiserfs_acl.h>
#include <asm/uaccess.h>
#include <net/checksum.h>
-#include <linux/smp_lock.h>
#include <linux/stat.h>
#include <linux/quotaops.h>
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 3b52770..cb5fc57 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -30,6 +30,7 @@
#include <linux/fs.h>
#include <linux/vfs.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/pagemap.h>
#include <linux/init.h>
diff --git a/fs/sync.c b/fs/sync.c
index dd20002..3422ba6 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -112,8 +112,13 @@
mutex_unlock(&mutex);
}
+/*
+ * sync everything. Start out by waking pdflush, because that writes back
+ * all queues in parallel.
+ */
SYSCALL_DEFINE0(sync)
{
+ wakeup_pdflush(0);
sync_filesystems(0);
sync_filesystems(1);
if (unlikely(laptop_mode))
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 9345806..2524714 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -171,6 +171,7 @@
if (count > 0)
*off = offs + count;
+ kfree(temp);
return count;
}
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index d88d0fa..14f2d71 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -939,8 +939,10 @@
/* Remove from old parent's list and insert into new parent's list. */
sysfs_unlink_sibling(sd);
sysfs_get(new_parent_sd);
+ drop_nlink(old_parent->d_inode);
sysfs_put(sd->s_parent);
sd->s_parent = new_parent_sd;
+ inc_nlink(new_parent->d_inode);
sysfs_link_sibling(sd);
out_unlock:
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index bc58571..762a7d6 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -297,6 +297,7 @@
{
struct ubifs_wbuf *wbuf = container_of(timer, struct ubifs_wbuf, timer);
+ dbg_io("jhead %d", wbuf->jhead);
wbuf->need_sync = 1;
wbuf->c->need_wbuf_sync = 1;
ubifs_wake_up_bgt(wbuf->c);
@@ -311,8 +312,12 @@
{
ubifs_assert(!hrtimer_active(&wbuf->timer));
- if (!ktime_to_ns(wbuf->softlimit))
+ if (wbuf->no_timer)
return;
+ dbg_io("set timer for jhead %d, %llu-%llu millisecs", wbuf->jhead,
+ div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC),
+ div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta,
+ USEC_PER_SEC));
hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta,
HRTIMER_MODE_REL);
}
@@ -323,11 +328,8 @@
*/
static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
{
- /*
- * If the syncer is waiting for the lock (from the background thread's
- * context) and another task is changing write-buffer then the syncing
- * should be canceled.
- */
+ if (wbuf->no_timer)
+ return;
wbuf->need_sync = 0;
hrtimer_cancel(&wbuf->timer);
}
@@ -349,8 +351,8 @@
/* Write-buffer is empty or not seeked */
return 0;
- dbg_io("LEB %d:%d, %d bytes",
- wbuf->lnum, wbuf->offs, wbuf->used);
+ dbg_io("LEB %d:%d, %d bytes, jhead %d",
+ wbuf->lnum, wbuf->offs, wbuf->used, wbuf->jhead);
ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY));
ubifs_assert(!(wbuf->avail & 7));
ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size);
@@ -390,7 +392,7 @@
* @offs: logical eraseblock offset to seek to
* @dtype: data type
*
- * This function targets the write buffer to logical eraseblock @lnum:@offs.
+ * This function targets the write-buffer to logical eraseblock @lnum:@offs.
* The write-buffer is synchronized if it is not empty. Returns zero in case of
* success and a negative error code in case of failure.
*/
@@ -399,7 +401,7 @@
{
const struct ubifs_info *c = wbuf->c;
- dbg_io("LEB %d:%d", lnum, offs);
+ dbg_io("LEB %d:%d, jhead %d", lnum, offs, wbuf->jhead);
ubifs_assert(lnum >= 0 && lnum < c->leb_cnt);
ubifs_assert(offs >= 0 && offs <= c->leb_size);
ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7));
@@ -506,9 +508,9 @@
struct ubifs_info *c = wbuf->c;
int err, written, n, aligned_len = ALIGN(len, 8), offs;
- dbg_io("%d bytes (%s) to wbuf at LEB %d:%d", len,
- dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->lnum,
- wbuf->offs + wbuf->used);
+ dbg_io("%d bytes (%s) to jhead %d wbuf at LEB %d:%d", len,
+ dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->jhead,
+ wbuf->lnum, wbuf->offs + wbuf->used);
ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
@@ -533,8 +535,8 @@
memcpy(wbuf->buf + wbuf->used, buf, len);
if (aligned_len == wbuf->avail) {
- dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum,
- wbuf->offs);
+ dbg_io("flush jhead %d wbuf to LEB %d:%d",
+ wbuf->jhead, wbuf->lnum, wbuf->offs);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf,
wbuf->offs, c->min_io_size,
wbuf->dtype);
@@ -562,7 +564,8 @@
* minimal I/O unit. We have to fill and flush write-buffer and switch
* to the next min. I/O unit.
*/
- dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum, wbuf->offs);
+ dbg_io("flush jhead %d wbuf to LEB %d:%d",
+ wbuf->jhead, wbuf->lnum, wbuf->offs);
memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
c->min_io_size, wbuf->dtype);
@@ -695,7 +698,8 @@
int err, rlen, overlap;
struct ubifs_ch *ch = buf;
- dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
+ dbg_io("LEB %d:%d, %s, length %d, jhead %d", lnum, offs,
+ dbg_ntype(type), len, wbuf->jhead);
ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
ubifs_assert(!(offs & 7) && offs < c->leb_size);
ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
@@ -819,13 +823,12 @@
* @c: UBIFS file-system description object
* @wbuf: write-buffer to initialize
*
- * This function initializes write buffer. Returns zero in case of success
+ * This function initializes write-buffer. Returns zero in case of success
* %-ENOMEM in case of failure.
*/
int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
{
size_t size;
- ktime_t hardlimit;
wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL);
if (!wbuf->buf)
@@ -851,22 +854,16 @@
hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
wbuf->timer.function = wbuf_timer_callback_nolock;
- /*
- * Make write-buffer soft limit to be 20% of the hard limit. The
- * write-buffer timer is allowed to expire any time between the soft
- * and hard limits.
- */
- hardlimit = ktime_set(DEFAULT_WBUF_TIMEOUT_SECS, 0);
- wbuf->delta = (DEFAULT_WBUF_TIMEOUT_SECS * NSEC_PER_SEC) * 2 / 10;
- wbuf->softlimit = ktime_sub_ns(hardlimit, wbuf->delta);
- hrtimer_set_expires_range_ns(&wbuf->timer, wbuf->softlimit,
- wbuf->delta);
+ wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
+ wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
+ wbuf->delta *= 1000000000ULL;
+ ubifs_assert(wbuf->delta <= ULONG_MAX);
return 0;
}
/**
* ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array.
- * @wbuf: the write-buffer whereto add
+ * @wbuf: the write-buffer where to add
* @inum: the inode number
*
* This function adds an inode number to the inode array of the write-buffer.
diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c
index 6db7a6b..8aacd64 100644
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -25,7 +25,6 @@
/* This file implements EXT2-compatible extended attribute ioctl() calls */
#include <linux/compat.h>
-#include <linux/smp_lock.h>
#include <linux/mount.h>
#include "ubifs.h"
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 8056052..e5f6cf8 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -53,6 +53,25 @@
}
/**
+ * first_non_ff - find offset of the first non-0xff byte.
+ * @buf: buffer to search in
+ * @len: length of buffer
+ *
+ * This function returns offset of the first non-0xff byte in @buf or %-1 if
+ * the buffer contains only 0xff bytes.
+ */
+static int first_non_ff(void *buf, int len)
+{
+ uint8_t *p = buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (*p++ != 0xff)
+ return i;
+ return -1;
+}
+
+/**
* get_master_node - get the last valid master node allowing for corruption.
* @c: UBIFS file-system description object
* @lnum: LEB number
@@ -357,11 +376,7 @@
empty_offs = ALIGN(offs + 1, c->min_io_size);
check_len = c->leb_size - empty_offs;
p = buf + empty_offs - offs;
-
- for (; check_len > 0; check_len--)
- if (*p++ != 0xff)
- return 0;
- return 1;
+ return is_empty(p, check_len);
}
/**
@@ -543,8 +558,8 @@
*
* This function does a scan of a LEB, but caters for errors that might have
* been caused by the unclean unmount from which we are attempting to recover.
- *
- * This function returns %0 on success and a negative error code on failure.
+ * Returns %0 in case of success, %-EUCLEAN if an unrecoverable corruption is
+ * found, and a negative error code in case of failure.
*/
struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
int offs, void *sbuf, int grouped)
@@ -643,7 +658,8 @@
goto corrupted;
default:
dbg_err("unknown");
- goto corrupted;
+ err = -EINVAL;
+ goto error;
}
}
@@ -652,8 +668,13 @@
clean_buf(c, &buf, lnum, &offs, &len);
need_clean = 1;
} else {
- ubifs_err("corrupt empty space at LEB %d:%d",
- lnum, offs);
+ int corruption = first_non_ff(buf, len);
+
+ ubifs_err("corrupt empty space LEB %d:%d, corruption "
+ "starts at %d", lnum, offs, corruption);
+ /* Make sure we dump interesting non-0xFF data */
+ offs = corruption;
+ buf += corruption;
goto corrupted;
}
}
@@ -813,7 +834,7 @@
static int recover_head(const struct ubifs_info *c, int lnum, int offs,
void *sbuf)
{
- int len, err, need_clean = 0;
+ int len, err;
if (c->min_io_size > 1)
len = c->min_io_size;
@@ -827,19 +848,7 @@
/* Read at the head location and check it is empty flash */
err = ubi_read(c->ubi, lnum, sbuf, offs, len);
- if (err)
- need_clean = 1;
- else {
- uint8_t *p = sbuf;
-
- while (len--)
- if (*p++ != 0xff) {
- need_clean = 1;
- break;
- }
- }
-
- if (need_clean) {
+ if (err || !is_empty(sbuf, len)) {
dbg_rcvry("cleaning head at %d:%d", lnum, offs);
if (offs == 0)
return ubifs_leb_unmap(c, lnum);
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index 11cc801..2970500 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -837,9 +837,10 @@
dbg_mnt("replay log LEB %d:%d", lnum, offs);
sleb = ubifs_scan(c, lnum, offs, sbuf);
- if (IS_ERR(sleb)) {
- if (c->need_recovery)
- sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
+ if (IS_ERR(sleb) ) {
+ if (PTR_ERR(sleb) != -EUCLEAN || !c->need_recovery)
+ return PTR_ERR(sleb);
+ sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf);
if (IS_ERR(sleb))
return PTR_ERR(sleb);
}
@@ -957,7 +958,7 @@
return err;
out_dump:
- ubifs_err("log error detected while replying the log at LEB %d:%d",
+ ubifs_err("log error detected while replaying the log at LEB %d:%d",
lnum, offs + snod->offs);
dbg_dump_node(c, snod->node);
ubifs_scan_destroy(sleb);
diff --git a/fs/ubifs/scan.c b/fs/ubifs/scan.c
index 0ed8247..892ebfe 100644
--- a/fs/ubifs/scan.c
+++ b/fs/ubifs/scan.c
@@ -238,12 +238,12 @@
{
int len;
- ubifs_err("corrupted data at LEB %d:%d", lnum, offs);
+ ubifs_err("corruption at LEB %d:%d", lnum, offs);
if (dbg_failure_mode)
return;
len = c->leb_size - offs;
- if (len > 4096)
- len = 4096;
+ if (len > 8192)
+ len = 8192;
dbg_err("first %d bytes from LEB %d:%d", len, lnum, offs);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 4, buf, len, 1);
}
@@ -256,7 +256,9 @@
* @sbuf: scan buffer (must be c->leb_size)
*
* This function scans LEB number @lnum and returns complete information about
- * its contents. Returns an error code in case of failure.
+ * its contents. Returns the scaned information in case of success and,
+ * %-EUCLEAN if the LEB neads recovery, and other negative error codes in case
+ * of failure.
*/
struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum,
int offs, void *sbuf)
@@ -279,7 +281,6 @@
cond_resched();
ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 0);
-
if (ret > 0) {
/* Padding bytes or a valid padding node */
offs += ret;
@@ -304,7 +305,8 @@
goto corrupted;
default:
dbg_err("unknown");
- goto corrupted;
+ err = -EINVAL;
+ goto error;
}
err = ubifs_add_snod(c, sleb, buf, offs);
@@ -317,8 +319,10 @@
len -= node_len;
}
- if (offs % c->min_io_size)
- goto corrupted;
+ if (offs % c->min_io_size) {
+ ubifs_err("empty space starts at non-aligned offset %d", offs);
+ goto corrupted;;
+ }
ubifs_end_scan(c, sleb, lnum, offs);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 79fad43..26d2e0d 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -797,7 +797,7 @@
* does not need to be synchronized by timer.
*/
c->jheads[GCHD].wbuf.dtype = UBI_LONGTERM;
- c->jheads[GCHD].wbuf.softlimit = ktime_set(0, 0);
+ c->jheads[GCHD].wbuf.no_timer = 1;
return 0;
}
@@ -986,7 +986,7 @@
switch (token) {
/*
* %Opt_fast_unmount and %Opt_norm_unmount options are ignored.
- * We accepte them in order to be backware-compatible. But this
+ * We accept them in order to be backward-compatible. But this
* should be removed at some point.
*/
case Opt_fast_unmount:
@@ -1287,6 +1287,9 @@
if (err)
goto out_journal;
+ /* Calculate 'min_idx_lebs' after journal replay */
+ c->min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+
err = ubifs_mount_orphans(c, c->need_recovery, mounted_read_only);
if (err)
goto out_orphans;
@@ -1754,10 +1757,8 @@
/* Synchronize write-buffers */
if (c->jheads)
- for (i = 0; i < c->jhead_cnt; i++) {
+ for (i = 0; i < c->jhead_cnt; i++)
ubifs_wbuf_sync(&c->jheads[i].wbuf);
- hrtimer_cancel(&c->jheads[i].wbuf.timer);
- }
/*
* On fatal errors c->ro_media is set to 1, in which case we do
@@ -1975,7 +1976,8 @@
err = bdi_init(&c->bdi);
if (err)
goto out_close;
- err = bdi_register(&c->bdi, NULL, "ubifs");
+ err = bdi_register(&c->bdi, NULL, "ubifs_%d_%d",
+ c->vi.ubi_num, c->vi.vol_id);
if (err)
goto out_bdi;
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 1bf01d8..a293490 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -95,8 +95,9 @@
*/
#define BGT_NAME_PATTERN "ubifs_bgt%d_%d"
-/* Default write-buffer synchronization timeout in seconds */
-#define DEFAULT_WBUF_TIMEOUT_SECS 5
+/* Write-buffer synchronization timeout interval in seconds */
+#define WBUF_TIMEOUT_SOFTLIMIT 3
+#define WBUF_TIMEOUT_HARDLIMIT 5
/* Maximum possible inode number (only 32-bit inodes are supported now) */
#define MAX_INUM 0xFFFFFFFF
@@ -654,7 +655,8 @@
* @delta: hard and soft timeouts delta (the timer expire inteval is @softlimit
* and @softlimit + @delta)
* @timer: write-buffer timer
- * @need_sync: it is set if its timer expired and needs sync
+ * @no_timer: non-zero if this write-buffer does not have a timer
+ * @need_sync: non-zero if the timer expired and the wbuf needs sync'ing
* @next_ino: points to the next position of the following inode number
* @inodes: stores the inode numbers of the nodes which are in wbuf
*
@@ -683,7 +685,8 @@
ktime_t softlimit;
unsigned long long delta;
struct hrtimer timer;
- int need_sync;
+ unsigned int no_timer:1;
+ unsigned int need_sync:1;
int next_ino;
ino_t *inodes;
};
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 6832135..9d1b8c2 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1087,11 +1087,23 @@
struct udf_inode_info *vati;
uint32_t pos;
struct virtualAllocationTable20 *vat20;
+ sector_t blocks = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
/* VAT file entry is in the last recorded block */
ino.partitionReferenceNum = type1_index;
ino.logicalBlockNum = sbi->s_last_block - map->s_partition_root;
sbi->s_vat_inode = udf_iget(sb, &ino);
+ if (!sbi->s_vat_inode &&
+ sbi->s_last_block != blocks - 1) {
+ printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
+ " last recorded block (%lu), retrying with the last "
+ "block of the device (%lu).\n",
+ (unsigned long)sbi->s_last_block,
+ (unsigned long)blocks - 1);
+ ino.partitionReferenceNum = type1_index;
+ ino.logicalBlockNum = blocks - 1 - map->s_partition_root;
+ sbi->s_vat_inode = udf_iget(sb, &ino);
+ }
if (!sbi->s_vat_inode)
return 1;
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index 1cd3b55..2d3f90a 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -53,7 +53,7 @@
printk(KERN_ERR "XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
__func__, lflags);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
} while (1);
}
@@ -130,7 +130,7 @@
printk(KERN_ERR "XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
__func__, lflags);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
} while (1);
}
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 7ec89fc..aecf251 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1268,6 +1268,14 @@
if (!page_has_buffers(page))
create_empty_buffers(page, 1 << inode->i_blkbits, 0);
+
+ /*
+ * VM calculation for nr_to_write seems off. Bump it way
+ * up, this gets simple streaming writes zippy again.
+ * To be reviewed again after Jens' writeback changes.
+ */
+ wbc->nr_to_write *= 4;
+
/*
* Convert delayed allocate, unwritten or unmapped space
* to real space and flush out to disk.
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 1418b91..965df12 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -412,7 +412,7 @@
XFS_STATS_INC(xb_page_retries);
xfsbufd_wakeup(0, gfp_mask);
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
@@ -770,7 +770,7 @@
bp->b_pages = NULL;
bp->b_addr = mem;
- rval = _xfs_buf_get_pages(bp, page_count, 0);
+ rval = _xfs_buf_get_pages(bp, page_count, XBF_DONT_BLOCK);
if (rval)
return rval;
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index f4e2554..0542fd5 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -41,7 +41,6 @@
#include "xfs_ioctl.h"
#include <linux/dcache.h>
-#include <linux/smp_lock.h>
static struct vm_operations_struct xfs_file_vm_ops;
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 58973bb..8070b34 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -680,8 +680,8 @@
else
bm.bmv_length = BTOBB(length);
- /* our formatter will tell xfs_getbmap when to stop. */
- bm.bmv_count = MAXEXTNUM;
+ /* We add one because in getbmap world count includes the header */
+ bm.bmv_count = fieinfo->fi_extents_max + 1;
bm.bmv_iflags = BMV_IF_PREALLOC;
if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR)
bm.bmv_iflags |= BMV_IF_ATTRFORK;
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index db15feb..4ece190 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -2010,7 +2010,9 @@
dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock);
blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
error = xfs_read_buf(mp, mp->m_ddev_targp, dblkno,
- blkcnt, XFS_BUF_LOCK, &bp);
+ blkcnt,
+ XFS_BUF_LOCK | XBF_DONT_BLOCK,
+ &bp);
if (error)
return(error);
@@ -2141,8 +2143,8 @@
dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock),
blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
- bp = xfs_buf_get_flags(mp->m_ddev_targp, dblkno,
- blkcnt, XFS_BUF_LOCK);
+ bp = xfs_buf_get_flags(mp->m_ddev_targp, dblkno, blkcnt,
+ XFS_BUF_LOCK | XBF_DONT_BLOCK);
ASSERT(bp);
ASSERT(!XFS_BUF_GETERROR(bp));
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 7928b99..8ee5b5a 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -6009,7 +6009,7 @@
*/
error = ENOMEM;
subnex = 16;
- map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+ map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL | KM_NOFS);
if (!map)
goto out_unlock_ilock;
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index e9df995..2671738 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -120,8 +120,8 @@
XFS_RANDOM_BTREE_CHECK_SBLOCK))) {
if (bp)
xfs_buftrace("SBTREE ERROR", bp);
- XFS_ERROR_REPORT("xfs_btree_check_sblock", XFS_ERRLEVEL_LOW,
- cur->bc_mp);
+ XFS_CORRUPTION_ERROR("xfs_btree_check_sblock",
+ XFS_ERRLEVEL_LOW, cur->bc_mp, block);
return XFS_ERROR(EFSCORRUPTED);
}
return 0;
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index 9ff6e57..2847bbc 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -2201,7 +2201,7 @@
xfs_da_state_t *
xfs_da_state_alloc(void)
{
- return kmem_zone_zalloc(xfs_da_state_zone, KM_SLEEP);
+ return kmem_zone_zalloc(xfs_da_state_zone, KM_NOFS);
}
/*
@@ -2261,9 +2261,9 @@
int off;
if (nbuf == 1)
- dabuf = kmem_zone_alloc(xfs_dabuf_zone, KM_SLEEP);
+ dabuf = kmem_zone_alloc(xfs_dabuf_zone, KM_NOFS);
else
- dabuf = kmem_alloc(XFS_DA_BUF_SIZE(nbuf), KM_SLEEP);
+ dabuf = kmem_alloc(XFS_DA_BUF_SIZE(nbuf), KM_NOFS);
dabuf->dirty = 0;
#ifdef XFS_DABUF_DEBUG
dabuf->ra = ra;
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index c657bec..bb1d58eb 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -256,7 +256,7 @@
!(args->op_flags & XFS_DA_OP_CILOOKUP))
return EEXIST;
- args->value = kmem_alloc(len, KM_MAYFAIL);
+ args->value = kmem_alloc(len, KM_NOFS | KM_MAYFAIL);
if (!args->value)
return ENOMEM;
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index cbd451b..2d0b3e1 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -167,17 +167,25 @@
new = nb - mp->m_sb.sb_dblocks;
oagcount = mp->m_sb.sb_agcount;
if (nagcount > oagcount) {
+ void *new_perag, *old_perag;
+
xfs_filestream_flush(mp);
+
+ new_perag = kmem_zalloc(sizeof(xfs_perag_t) * nagcount,
+ KM_MAYFAIL);
+ if (!new_perag)
+ return XFS_ERROR(ENOMEM);
+
down_write(&mp->m_peraglock);
- mp->m_perag = kmem_realloc(mp->m_perag,
- sizeof(xfs_perag_t) * nagcount,
- sizeof(xfs_perag_t) * oagcount,
- KM_SLEEP);
- memset(&mp->m_perag[oagcount], 0,
- (nagcount - oagcount) * sizeof(xfs_perag_t));
+ memcpy(new_perag, mp->m_perag, sizeof(xfs_perag_t) * oagcount);
+ old_perag = mp->m_perag;
+ mp->m_perag = new_perag;
+
mp->m_flags |= XFS_MOUNT_32BITINODES;
nagimax = xfs_initialize_perag(mp, nagcount);
up_write(&mp->m_peraglock);
+
+ kmem_free(old_perag);
}
tp = xfs_trans_alloc(mp, XFS_TRANS_GROWFS);
tp->t_flags |= XFS_TRANS_RESERVE;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 5fcec6f..34ec869 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -64,6 +64,10 @@
ip = kmem_zone_alloc(xfs_inode_zone, KM_SLEEP);
if (!ip)
return NULL;
+ if (inode_init_always(mp->m_super, VFS_I(ip))) {
+ kmem_zone_free(xfs_inode_zone, ip);
+ return NULL;
+ }
ASSERT(atomic_read(&ip->i_iocount) == 0);
ASSERT(atomic_read(&ip->i_pincount) == 0);
@@ -105,17 +109,6 @@
#ifdef XFS_DIR2_TRACE
ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
#endif
- /*
- * Now initialise the VFS inode. We do this after the xfs_inode
- * initialisation as internal failures will result in ->destroy_inode
- * being called and that will pass down through the reclaim path and
- * free the XFS inode. This path requires the XFS inode to already be
- * initialised. Hence if this call fails, the xfs_inode has already
- * been freed and we should not reference it at all in the error
- * handling.
- */
- if (!inode_init_always(mp->m_super, VFS_I(ip)))
- return NULL;
/* prevent anyone from using this yet */
VFS_I(ip)->i_state = I_NEW|I_LOCK;
@@ -123,6 +116,71 @@
return ip;
}
+STATIC void
+xfs_inode_free(
+ struct xfs_inode *ip)
+{
+ switch (ip->i_d.di_mode & S_IFMT) {
+ case S_IFREG:
+ case S_IFDIR:
+ case S_IFLNK:
+ xfs_idestroy_fork(ip, XFS_DATA_FORK);
+ break;
+ }
+
+ if (ip->i_afp)
+ xfs_idestroy_fork(ip, XFS_ATTR_FORK);
+
+#ifdef XFS_INODE_TRACE
+ ktrace_free(ip->i_trace);
+#endif
+#ifdef XFS_BMAP_TRACE
+ ktrace_free(ip->i_xtrace);
+#endif
+#ifdef XFS_BTREE_TRACE
+ ktrace_free(ip->i_btrace);
+#endif
+#ifdef XFS_RW_TRACE
+ ktrace_free(ip->i_rwtrace);
+#endif
+#ifdef XFS_ILOCK_TRACE
+ ktrace_free(ip->i_lock_trace);
+#endif
+#ifdef XFS_DIR2_TRACE
+ ktrace_free(ip->i_dir_trace);
+#endif
+
+ if (ip->i_itemp) {
+ /*
+ * Only if we are shutting down the fs will we see an
+ * inode still in the AIL. If it is there, we should remove
+ * it to prevent a use-after-free from occurring.
+ */
+ xfs_log_item_t *lip = &ip->i_itemp->ili_item;
+ struct xfs_ail *ailp = lip->li_ailp;
+
+ ASSERT(((lip->li_flags & XFS_LI_IN_AIL) == 0) ||
+ XFS_FORCED_SHUTDOWN(ip->i_mount));
+ if (lip->li_flags & XFS_LI_IN_AIL) {
+ spin_lock(&ailp->xa_lock);
+ if (lip->li_flags & XFS_LI_IN_AIL)
+ xfs_trans_ail_delete(ailp, lip);
+ else
+ spin_unlock(&ailp->xa_lock);
+ }
+ xfs_inode_item_destroy(ip);
+ ip->i_itemp = NULL;
+ }
+
+ /* asserts to verify all state is correct here */
+ ASSERT(atomic_read(&ip->i_iocount) == 0);
+ ASSERT(atomic_read(&ip->i_pincount) == 0);
+ ASSERT(!spin_is_locked(&ip->i_flags_lock));
+ ASSERT(completion_done(&ip->i_flush));
+
+ kmem_zone_free(xfs_inode_zone, ip);
+}
+
/*
* Check the validity of the inode we just found it the cache
*/
@@ -167,7 +225,7 @@
* errors cleanly, then tag it so it can be set up correctly
* later.
*/
- if (!inode_init_always(mp->m_super, VFS_I(ip))) {
+ if (inode_init_always(mp->m_super, VFS_I(ip))) {
error = ENOMEM;
goto out_error;
}
@@ -299,7 +357,8 @@
if (lock_flags)
xfs_iunlock(ip, lock_flags);
out_destroy:
- xfs_destroy_inode(ip);
+ __destroy_inode(VFS_I(ip));
+ xfs_inode_free(ip);
return error;
}
@@ -504,62 +563,7 @@
xfs_qm_dqdetach(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- switch (ip->i_d.di_mode & S_IFMT) {
- case S_IFREG:
- case S_IFDIR:
- case S_IFLNK:
- xfs_idestroy_fork(ip, XFS_DATA_FORK);
- break;
- }
-
- if (ip->i_afp)
- xfs_idestroy_fork(ip, XFS_ATTR_FORK);
-
-#ifdef XFS_INODE_TRACE
- ktrace_free(ip->i_trace);
-#endif
-#ifdef XFS_BMAP_TRACE
- ktrace_free(ip->i_xtrace);
-#endif
-#ifdef XFS_BTREE_TRACE
- ktrace_free(ip->i_btrace);
-#endif
-#ifdef XFS_RW_TRACE
- ktrace_free(ip->i_rwtrace);
-#endif
-#ifdef XFS_ILOCK_TRACE
- ktrace_free(ip->i_lock_trace);
-#endif
-#ifdef XFS_DIR2_TRACE
- ktrace_free(ip->i_dir_trace);
-#endif
- if (ip->i_itemp) {
- /*
- * Only if we are shutting down the fs will we see an
- * inode still in the AIL. If it is there, we should remove
- * it to prevent a use-after-free from occurring.
- */
- xfs_log_item_t *lip = &ip->i_itemp->ili_item;
- struct xfs_ail *ailp = lip->li_ailp;
-
- ASSERT(((lip->li_flags & XFS_LI_IN_AIL) == 0) ||
- XFS_FORCED_SHUTDOWN(ip->i_mount));
- if (lip->li_flags & XFS_LI_IN_AIL) {
- spin_lock(&ailp->xa_lock);
- if (lip->li_flags & XFS_LI_IN_AIL)
- xfs_trans_ail_delete(ailp, lip);
- else
- spin_unlock(&ailp->xa_lock);
- }
- xfs_inode_item_destroy(ip);
- ip->i_itemp = NULL;
- }
- /* asserts to verify all state is correct here */
- ASSERT(atomic_read(&ip->i_iocount) == 0);
- ASSERT(atomic_read(&ip->i_pincount) == 0);
- ASSERT(!spin_is_locked(&ip->i_flags_lock));
- ASSERT(completion_done(&ip->i_flush));
- kmem_zone_free(xfs_inode_zone, ip);
+ xfs_inode_free(ip);
}
/*
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 1f22d65..da428b3 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -343,6 +343,16 @@
return XFS_ERROR(EFSCORRUPTED);
}
+ if (unlikely((ip->i_d.di_flags & XFS_DIFLAG_REALTIME) &&
+ !ip->i_mount->m_rtdev_targp)) {
+ xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+ "corrupt dinode %Lu, has realtime flag set.",
+ ip->i_ino);
+ XFS_CORRUPTION_ERROR("xfs_iformat(realtime)",
+ XFS_ERRLEVEL_LOW, ip->i_mount, dip);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+
switch (ip->i_d.di_mode & S_IFMT) {
case S_IFIFO:
case S_IFCHR:
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 1804f86..65f24a3 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -310,23 +310,6 @@
}
/*
- * Get rid of a partially initialized inode.
- *
- * We have to go through destroy_inode to make sure allocations
- * from init_inode_always like the security data are undone.
- *
- * We mark the inode bad so that it takes the short cut in
- * the reclaim path instead of going through the flush path
- * which doesn't make sense for an inode that has never seen the
- * light of day.
- */
-static inline void xfs_destroy_inode(struct xfs_inode *ip)
-{
- make_bad_inode(VFS_I(ip));
- return destroy_inode(VFS_I(ip));
-}
-
-/*
* i_flags helper functions
*/
static inline void
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 3750f04..9dbdff3 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -3180,7 +3180,7 @@
STATIC void
xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog)
{
- ASSERT(spin_is_locked(&log->l_icloglock));
+ assert_spin_locked(&log->l_icloglock);
if (iclog->ic_state == XLOG_STATE_ACTIVE) {
xlog_state_switch_iclogs(log, iclog, 0);
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index c4eca5e..492d75b 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -538,7 +538,9 @@
d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock);
byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount);
- bp = xfs_buf_read(mp->m_ddev_targp, d, BTOBB(byte_cnt), 0);
+ bp = xfs_buf_read_flags(mp->m_ddev_targp, d, BTOBB(byte_cnt),
+ XBF_LOCK | XBF_MAPPED |
+ XBF_DONT_BLOCK);
error = XFS_BUF_GETERROR(bp);
if (error) {
xfs_ioerror_alert("xfs_readlink",
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 3e798593b..ab0b85c 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -242,6 +242,10 @@
acpi_status acpi_os_validate_interface(char *interface);
acpi_status acpi_osi_invalidate(char* interface);
+acpi_status
+acpi_os_validate_address(u8 space_id, acpi_physical_address address,
+ acpi_size length, char *name);
+
u64 acpi_os_get_timer(void);
acpi_status acpi_os_signal(u32 function, void *info);
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index 9d40e87..77ff547 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -27,9 +27,9 @@
#define pud_page_vaddr(pud) pgd_page_vaddr(pud)
#undef pud_free_tlb
-#define pud_free_tlb(tlb, x) do { } while (0)
+#define pud_free_tlb(tlb, x, addr) do { } while (0)
#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
+#define __pud_free_tlb(tlb, x, addr) do { } while (0)
#undef pud_addr_end
#define pud_addr_end(addr, end) (end)
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index d7d50d7..aa00800 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -97,4 +97,8 @@
#define PER_CPU_ATTRIBUTES
#endif
+#ifndef PER_CPU_DEF_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
+#endif
+
#endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index a7cdc48..725612b 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -59,7 +59,7 @@
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
{
}
-#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x, a) do { } while (0)
#undef pmd_addr_end
#define pmd_addr_end(addr, end) (end)
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index 87cf449..810431d 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -52,7 +52,7 @@
*/
#define pud_alloc_one(mm, address) NULL
#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
+#define __pud_free_tlb(tlb, x, a) do { } while (0)
#undef pud_addr_end
#define pud_addr_end(addr, end) (end)
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index f490e43..e43f976 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -123,24 +123,24 @@
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
-#define pte_free_tlb(tlb, ptep) \
+#define pte_free_tlb(tlb, ptep, address) \
do { \
tlb->need_flush = 1; \
- __pte_free_tlb(tlb, ptep); \
+ __pte_free_tlb(tlb, ptep, address); \
} while (0)
#ifndef __ARCH_HAS_4LEVEL_HACK
-#define pud_free_tlb(tlb, pudp) \
+#define pud_free_tlb(tlb, pudp, address) \
do { \
tlb->need_flush = 1; \
- __pud_free_tlb(tlb, pudp); \
+ __pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif
-#define pmd_free_tlb(tlb, pmdp) \
+#define pmd_free_tlb(tlb, pmdp, address) \
do { \
tlb->need_flush = 1; \
- __pmd_free_tlb(tlb, pmdp); \
+ __pmd_free_tlb(tlb, pmdp, address); \
} while (0)
#define tlb_migrate_finish(mm) do {} while (0)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 92b73b6..6ad76bf5f 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -30,9 +30,7 @@
* EXCEPTION_TABLE(...)
* NOTES
*
- * __bss_start = .;
- * BSS_SECTION(0, 0)
- * __bss_stop = .;
+ * BSS_SECTION(0, 0, 0)
* _end = .;
*
* /DISCARD/ : {
@@ -191,7 +189,7 @@
. = ALIGN(align); \
*(.data.cacheline_aligned)
-#define INIT_TASK(align) \
+#define INIT_TASK_DATA(align) \
. = ALIGN(align); \
*(.data.init_task)
@@ -434,14 +432,15 @@
/*
* Init task
*/
-#define INIT_TASK_DATA(align) \
+#define INIT_TASK_DATA_SECTION(align) \
. = ALIGN(align); \
.data.init_task : { \
- INIT_TASK \
+ INIT_TASK_DATA(align) \
}
#ifdef CONFIG_CONSTRUCTORS
-#define KERNEL_CTORS() VMLINUX_SYMBOL(__ctors_start) = .; \
+#define KERNEL_CTORS() . = ALIGN(8); \
+ VMLINUX_SYMBOL(__ctors_start) = .; \
*(.ctors) \
VMLINUX_SYMBOL(__ctors_end) = .;
#else
@@ -488,7 +487,8 @@
* bss (Block Started by Symbol) - uninitialized data
* zeroed during startup
*/
-#define SBSS \
+#define SBSS(sbss_align) \
+ . = ALIGN(sbss_align); \
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
*(.sbss) \
*(.scommon) \
@@ -497,12 +497,10 @@
#define BSS(bss_align) \
. = ALIGN(bss_align); \
.bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__bss_start) = .; \
*(.bss.page_aligned) \
*(.dynbss) \
*(.bss) \
*(COMMON) \
- VMLINUX_SYMBOL(__bss_stop) = .; \
}
/*
@@ -704,15 +702,15 @@
* matches the requirment of PAGE_ALIGNED_DATA.
*
* use 0 as page_align if page_aligned data is not used */
-#define RW_DATA_SECTION(cacheline, nosave, pagealigned, inittask) \
+#define RW_DATA_SECTION(cacheline, pagealigned, inittask) \
. = ALIGN(PAGE_SIZE); \
.data : AT(ADDR(.data) - LOAD_OFFSET) { \
- INIT_TASK(inittask) \
+ INIT_TASK_DATA(inittask) \
CACHELINE_ALIGNED_DATA(cacheline) \
READ_MOSTLY_DATA(cacheline) \
DATA_DATA \
CONSTRUCTORS \
- NOSAVE_DATA(nosave) \
+ NOSAVE_DATA \
PAGE_ALIGNED_DATA(pagealigned) \
}
@@ -734,8 +732,10 @@
INIT_RAM_FS \
}
-#define BSS_SECTION(sbss_align, bss_align) \
- SBSS \
+#define BSS_SECTION(sbss_align, bss_align, stop_align) \
+ . = ALIGN(sbss_align); \
+ VMLINUX_SYMBOL(__bss_start) = .; \
+ SBSS(sbss_align) \
BSS(bss_align) \
- . = ALIGN(4);
-
+ . = ALIGN(stop_align); \
+ VMLINUX_SYMBOL(__bss_stop) = .;
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c263e4d..7d6c9a2 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -35,11 +35,11 @@
} __attribute__((packed));
/* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
-#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_SHIFT 6
#define EDID_TIMING_ASPECT_MASK (0x3 << EDID_TIMING_ASPECT_SHIFT)
/* need to add 60 */
-#define EDID_TIMING_VFREQ_SHIFT 2
+#define EDID_TIMING_VFREQ_SHIFT 0
#define EDID_TIMING_VFREQ_MASK (0x3f << EDID_TIMING_VFREQ_SHIFT)
struct std_timing {
@@ -47,11 +47,11 @@
u8 vfreq_aspect;
} __attribute__((packed));
-#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
-#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
#define DRM_EDID_PT_SEPARATE_SYNC (3 << 3)
-#define DRM_EDID_PT_STEREO (1 << 2)
-#define DRM_EDID_PT_INTERLACED (1 << 1)
+#define DRM_EDID_PT_STEREO (1 << 5)
+#define DRM_EDID_PT_INTERLACED (1 << 7)
/* If detailed data is pixel timing */
struct detailed_pixel_timing {
@@ -93,7 +93,7 @@
} __attribute__((packed));
struct detailed_data_wpindex {
- u8 white_xy_lo; /* Upper 2 bits each */
+ u8 white_yx_lo; /* Lower 2 bits each */
u8 white_x_hi;
u8 white_y_hi;
u8 gamma; /* need to divide by 100 then add 1 */
@@ -135,21 +135,21 @@
} data;
} __attribute__((packed));
-#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
-#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 5)
-#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 4)
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 2)
#define DRM_EDID_INPUT_SEPARATE_SYNCS (1 << 3)
-#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 2)
-#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 1)
-#define DRM_EDID_INPUT_DIGITAL (1 << 0) /* bits above must be zero if set */
+#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL (1 << 7) /* bits below must be zero if set */
-#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 7)
-#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
-#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 5)
+#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 2)
#define DRM_EDID_FEATURE_DISPLAY_TYPE (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 2)
-#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 1)
-#define DRM_EDID_FEATURE_PM_STANDBY (1 << 0)
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY (1 << 7)
struct edid {
u8 header[8];
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 45c1867..8535084 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -43,6 +43,7 @@
{0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x4B48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
@@ -256,12 +257,16 @@
{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x94A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x94B4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x94B9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x9443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9444, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
{0x1002, 0x944A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -286,6 +291,7 @@
{0x1002, 0x948F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9490, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9491, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x9495, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9498, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x949C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
{0x1002, 0x949E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
@@ -323,6 +329,7 @@
{0x1002, 0x9552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9553, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9555, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x9557, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9580, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9581, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x9583, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -346,12 +353,12 @@
{0x1002, 0x9599, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
{0x1002, 0x959B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
{0x1002, 0x95CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
@@ -363,6 +370,11 @@
{0x1002, 0x9614, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9615, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9616, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9713, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9714, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 41862e9..af4b482 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -506,6 +506,8 @@
#define DRM_RADEON_GEM_WAIT_IDLE 0x24
#define DRM_RADEON_CS 0x26
#define DRM_RADEON_INFO 0x27
+#define DRM_RADEON_GEM_SET_TILING 0x28
+#define DRM_RADEON_GEM_GET_TILING 0x29
#define DRM_IOCTL_RADEON_CP_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
#define DRM_IOCTL_RADEON_CP_START DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_START)
@@ -544,7 +546,8 @@
#define DRM_IOCTL_RADEON_GEM_WAIT_IDLE DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
#define DRM_IOCTL_RADEON_CS DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
#define DRM_IOCTL_RADEON_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
-
+#define DRM_IOCTL_RADEON_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
typedef struct drm_radeon_init {
enum {
@@ -796,6 +799,24 @@
uint32_t flags;
};
+#define RADEON_TILING_MACRO 0x1
+#define RADEON_TILING_MICRO 0x2
+#define RADEON_TILING_SWAP 0x4
+#define RADEON_TILING_SURFACE 0x8 /* this object requires a surface
+ * when mapped - i.e. front buffer */
+
+struct drm_radeon_gem_set_tiling {
+ uint32_t handle;
+ uint32_t tiling_flags;
+ uint32_t pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+ uint32_t handle;
+ uint32_t tiling_flags;
+ uint32_t pitch;
+};
+
struct drm_radeon_gem_mmap {
uint32_t handle;
uint32_t pad;
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 62ed733..a68829d 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -121,6 +121,7 @@
#define TTM_PAGE_FLAG_SWAPPED (1 << 4)
#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
#define TTM_PAGE_FLAG_ZERO_ALLOC (1 << 6)
+#define TTM_PAGE_FLAG_DMA32 (1 << 7)
enum ttm_caching_state {
tt_uncached,
@@ -353,6 +354,14 @@
int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
void (*sync_obj_unref) (void **sync_obj);
void *(*sync_obj_ref) (void *sync_obj);
+
+ /* hook to notify driver about a driver move so it
+ * can do tiling things */
+ void (*move_notify)(struct ttm_buffer_object *bo,
+ struct ttm_mem_reg *new_mem);
+ /* notify the driver we are taking a fault on this BO
+ * and have reserved it */
+ void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
};
#define TTM_NUM_MEM_TYPES 8
@@ -429,6 +438,8 @@
*/
struct delayed_work wq;
+
+ bool need_dma32;
};
/**
@@ -648,7 +659,14 @@
extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
struct ttm_mem_global *mem_glob,
struct ttm_bo_driver *driver,
- uint64_t file_page_offset);
+ uint64_t file_page_offset, bool need_dma32);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ */
+extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
/**
* ttm_bo_reserve:
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
index 889a4c79..d1d4338 100644
--- a/include/drm/ttm/ttm_module.h
+++ b/include/drm/ttm/ttm_module.h
@@ -33,7 +33,7 @@
#include <linux/kernel.h>
-#define TTM_PFX "[TTM]"
+#define TTM_PFX "[TTM] "
enum ttm_global_types {
TTM_GLOBAL_TTM_MEM = 0,
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b16a957..47f7d93 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -121,9 +121,9 @@
/*
* If the aio_resfd field of the userspace iocb is not zero,
- * this is the underlying file* to deliver event to.
+ * this is the underlying eventfd context to deliver events to.
*/
- struct file *ki_eventfd;
+ struct eventfd_ctx *ki_eventfd;
};
#define is_sync_kiocb(iocb) ((iocb)->ki_key == KIOCB_SYNC_KEY)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 0ec2c59..1d52425 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -229,9 +229,14 @@
(1 << BDI_async_congested));
}
-void clear_bdi_congested(struct backing_dev_info *bdi, int rw);
-void set_bdi_congested(struct backing_dev_info *bdi, int rw);
-long congestion_wait(int rw, long timeout);
+enum {
+ BLK_RW_ASYNC = 0,
+ BLK_RW_SYNC = 1,
+};
+
+void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
+void set_bdi_congested(struct backing_dev_info *bdi, int sync);
+long congestion_wait(int sync, long timeout);
static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi)
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 2a04eb5..2892b710 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -319,7 +319,6 @@
*/
struct bio_integrity_payload {
struct bio *bip_bio; /* parent bio */
- struct bio_vec *bip_vec; /* integrity data vector */
sector_t bip_sector; /* virtual start sector */
@@ -328,11 +327,12 @@
unsigned int bip_size;
- unsigned short bip_pool; /* pool the ivec came from */
+ unsigned short bip_slab; /* slab the bip came from */
unsigned short bip_vcnt; /* # of integrity bio_vecs */
unsigned short bip_idx; /* current bip_vec index */
struct work_struct bip_work; /* I/O completion */
+ struct bio_vec bip_vec[0]; /* embedded bvec array */
};
#endif /* CONFIG_BLK_DEV_INTEGRITY */
@@ -430,6 +430,9 @@
unsigned int front_pad;
mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+ mempool_t *bio_integrity_pool;
+#endif
mempool_t *bvec_pool;
};
@@ -634,8 +637,9 @@
#define bio_integrity(bio) (bio->bi_integrity != NULL)
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
-extern void bio_integrity_free(struct bio *);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
extern int bio_integrity_enabled(struct bio *bio);
extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
@@ -645,21 +649,27 @@
extern void bio_integrity_advance(struct bio *, unsigned int);
extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init(void);
#else /* CONFIG_BLK_DEV_INTEGRITY */
#define bio_integrity(a) (0)
+#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c) (0)
-#define bio_integrity_free(a) do { } while (0)
+#define bio_integrity_clone(a, b, c, d) (0)
+#define bioset_integrity_free(a) do { } while (0)
+#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
#define bio_integrity_advance(a, b) do { } while (0)
#define bio_integrity_trim(a, b, c) do { } while (0)
#define bio_integrity_split(a, b, c) do { } while (0)
#define bio_integrity_set_tag(a, b, c) do { } while (0)
#define bio_integrity_get_tag(a, b, c) do { } while (0)
+#define bio_integrity_init(a) do { } while (0)
#endif /* CONFIG_BLK_DEV_INTEGRITY */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8963d91..69103e0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -70,11 +70,6 @@
REQ_TYPE_ATA_PC,
};
-enum {
- BLK_RW_ASYNC = 0,
- BLK_RW_SYNC = 1,
-};
-
/*
* For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
* sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
@@ -301,12 +296,6 @@
#define BLK_SCSI_MAX_CMDS (256)
#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-struct blk_cmd_filter {
- unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
- unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
- struct kobject kobj;
-};
-
struct queue_limits {
unsigned long bounce_pfn;
unsigned long seg_boundary_mask;
@@ -445,7 +434,6 @@
#if defined(CONFIG_BLK_DEV_BSG)
struct bsg_class_device bsg_dev;
#endif
- struct blk_cmd_filter cmd_filter;
};
#define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */
@@ -730,6 +718,7 @@
int nr_entries;
unsigned long offset;
int null_mapped;
+ int from_user;
};
struct req_iterator {
@@ -786,18 +775,18 @@
* congested queues, and wake up anyone who was waiting for requests to be
* put back.
*/
-static inline void blk_clear_queue_congested(struct request_queue *q, int rw)
+static inline void blk_clear_queue_congested(struct request_queue *q, int sync)
{
- clear_bdi_congested(&q->backing_dev_info, rw);
+ clear_bdi_congested(&q->backing_dev_info, sync);
}
/*
* A queue has just entered congestion. Flag that in the queue's VM-visible
* state flags and increment the global gounter of congested queues.
*/
-static inline void blk_set_queue_congested(struct request_queue *q, int rw)
+static inline void blk_set_queue_congested(struct request_queue *q, int sync)
{
- set_bdi_congested(&q->backing_dev_info, rw);
+ set_bdi_congested(&q->backing_dev_info, sync);
}
extern void blk_start_queue(struct request_queue *q);
@@ -924,6 +913,7 @@
extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
extern void blk_queue_alignment_offset(struct request_queue *q,
unsigned int alignment);
+extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
extern void blk_set_default_limits(struct queue_limits *lim);
@@ -998,13 +988,7 @@
return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL);
}
-/*
-* command filter functions
-*/
-extern int blk_verify_command(struct blk_cmd_filter *filter,
- unsigned char *cmd, fmode_t has_write_perm);
-extern void blk_unregister_filter(struct gendisk *disk);
-extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
+extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
#define MAX_PHYS_SEGMENTS 128
#define MAX_HW_SEGMENTS 128
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
index 63bc9a4..8cc1041 100644
--- a/include/linux/cb710.h
+++ b/include/linux/cb710.h
@@ -140,29 +140,6 @@
#include <linux/highmem.h>
#include <linux/scatterlist.h>
-/**
- * cb710_sg_miter_stop_writing - stop mapping iteration after writing
- * @miter: sg mapping iter to be stopped
- *
- * Description:
- * Stops mapping iterator @miter. @miter should have been started
- * started using sg_miter_start(). A stopped iteration can be
- * resumed by calling sg_miter_next() on it. This is useful when
- * resources (kmap) need to be released during iteration.
- *
- * This is a convenience wrapper that will be optimized out for arches
- * that don't need flush_kernel_dcache_page().
- *
- * Context:
- * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise.
- */
-static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
-{
- if (miter->page)
- flush_kernel_dcache_page(miter->page);
- sg_miter_stop(miter);
-}
-
/*
* 32-bit PIO mapping sg iterator
*
@@ -171,12 +148,12 @@
* without DMA support).
*
* Best-case reading (transfer from device):
- * sg_miter_start();
+ * sg_miter_start(, SG_MITER_TO_SG);
* cb710_sg_dwiter_write_from_io();
- * cb710_sg_miter_stop_writing();
+ * sg_miter_stop();
*
* Best-case writing (transfer to device):
- * sg_miter_start();
+ * sg_miter_start(, SG_MITER_FROM_SG);
* cb710_sg_dwiter_read_to_io();
* sg_miter_stop();
*/
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 665fa70..90bba9e 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -179,14 +179,11 @@
*/
struct list_head release_list;
- /* pids_mutex protects the fields below */
+ /* pids_mutex protects pids_list and cached pid arrays. */
struct rw_semaphore pids_mutex;
- /* Array of process ids in the cgroup */
- pid_t *tasks_pids;
- /* How many files are using the current tasks_pids array */
- int pids_use_count;
- /* Length of the current tasks_pids array */
- int pids_length;
+
+ /* Linked list of struct cgroup_pids */
+ struct list_head pids_list;
/* For RCU-protected deletion */
struct rcu_head rcu_head;
@@ -366,6 +363,23 @@
int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
/*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ * cgroup_exclude_rmdir();
+ * ...do some jobs which may access arbitrary empty cgroup
+ * cgroup_release_and_wakeup_rmdir();
+ *
+ * When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ * it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
+/*
* Control Group subsystem type.
* See Documentation/cgroups/cgroups.txt for details
*/
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 20a100f..3a1dbba 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -143,12 +143,3 @@
#endif
#endif
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-extern ktime_t clockevents_get_next_event(int cpu);
-#else
-static inline ktime_t clockevents_get_next_event(int cpu)
-{
- return (ktime_t) { .tv64 = KTIME_MAX };
-}
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c56457c..1219be4 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -293,7 +293,12 @@
if (cs->enable)
ret = cs->enable(cs);
- /* save mult_orig on enable */
+ /*
+ * The frequency may have changed while the clocksource
+ * was disabled. If so the code in ->enable() must update
+ * the mult value to reflect the new frequency. Make sure
+ * mult_orig follows this change.
+ */
cs->mult_orig = cs->mult;
return ret;
@@ -309,6 +314,13 @@
*/
static inline void clocksource_disable(struct clocksource *cs)
{
+ /*
+ * Save mult_orig in mult so clocksource_enable() can
+ * restore the value regardless if ->enable() updates
+ * the value of mult or not.
+ */
+ cs->mult = cs->mult_orig;
+
if (cs->disable)
cs->disable(cs);
}
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index d71f7c0..38fe59d 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -89,7 +89,6 @@
unsigned int vc_need_wrap : 1;
unsigned int vc_can_do_color : 1;
unsigned int vc_report_mouse : 2;
- unsigned int vc_kmalloced : 1;
unsigned char vc_utf : 1; /* Unicode UTF-8 encoding */
unsigned char vc_utf_count;
int vc_utf_char;
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 2dac064..0026f26 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -3,7 +3,6 @@
#ifdef CONFIG_CRASH_DUMP
#include <linux/kexec.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
diff --git a/include/linux/decompress/generic.h b/include/linux/decompress/generic.h
index 6dfb856..0c7111a 100644
--- a/include/linux/decompress/generic.h
+++ b/include/linux/decompress/generic.h
@@ -1,31 +1,37 @@
#ifndef DECOMPRESS_GENERIC_H
#define DECOMPRESS_GENERIC_H
-/* Minimal chunksize to be read.
- *Bzip2 prefers at least 4096
- *Lzma prefers 0x10000 */
-#define COMPR_IOBUF_SIZE 4096
-
typedef int (*decompress_fn) (unsigned char *inbuf, int len,
int(*fill)(void*, unsigned int),
- int(*writebb)(void*, unsigned int),
- unsigned char *output,
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
int *posp,
void(*error)(char *x));
/* inbuf - input buffer
*len - len of pre-read data in inbuf
- *fill - function to fill inbuf if empty
- *writebb - function to write out outbug
+ *fill - function to fill inbuf when empty
+ *flush - function to write out outbuf
+ *outbuf - output buffer
*posp - if non-null, input position (number of bytes read) will be
* returned here
*
- *If len != 0, the inbuf is initialized (with as much data), and fill
- *should not be called
- *If len = 0, the inbuf is allocated, but empty. Its size is IOBUF_SIZE
- *fill should be called (repeatedly...) to read data, at most IOBUF_SIZE
+ *If len != 0, inbuf should contain all the necessary input data, and fill
+ *should be NULL
+ *If len = 0, inbuf can be NULL, in which case the decompressor will allocate
+ *the input buffer. If inbuf != NULL it must be at least XXX_IOBUF_SIZE bytes.
+ *fill will be called (repeatedly...) to read data, at most XXX_IOBUF_SIZE
+ *bytes should be read per call. Replace XXX with the appropriate decompressor
+ *name, i.e. LZMA_IOBUF_SIZE.
+ *
+ *If flush = NULL, outbuf must be large enough to buffer all the expected
+ *output. If flush != NULL, the output buffer will be allocated by the
+ *decompressor (outbuf = NULL), and the flush function will be called to
+ *flush the output buffer at the appropriate time (decompressor and stream
+ *dependent).
*/
+
/* Utility routine to detect the decompression method */
decompress_fn decompress_method(const unsigned char *inbuf, int len,
const char **name);
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 0d63106..655e772 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -84,7 +84,7 @@
typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
struct dm_dev *dev,
- sector_t physical_start,
+ sector_t start, sector_t len,
void *data);
typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
@@ -104,7 +104,7 @@
* Combine device limits.
*/
int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, void *data);
+ sector_t start, sector_t len, void *data);
struct dm_dev {
struct block_device *bdev;
diff --git a/include/linux/device.h b/include/linux/device.h
index ed4e39f..aebb810 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -25,8 +25,6 @@
#include <asm/atomic.h>
#include <asm/device.h>
-#define BUS_ID_SIZE 20
-
struct device;
struct device_private;
struct device_driver;
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 7605c5e..00d6a68 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -122,9 +122,10 @@
static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
{
-#ifdef ELF_CORE_COPY_TASK_REGS
-
+#if defined (ELF_CORE_COPY_TASK_REGS)
return ELF_CORE_COPY_TASK_REGS(t, elfregs);
+#elif defined (task_pt_regs)
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
#endif
return 0;
}
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index f45a8ae..3b85ba6 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -8,10 +8,8 @@
#ifndef _LINUX_EVENTFD_H
#define _LINUX_EVENTFD_H
-#ifdef CONFIG_EVENTFD
-
-/* For O_CLOEXEC and O_NONBLOCK */
#include <linux/fcntl.h>
+#include <linux/file.h>
/*
* CAREFUL: Check include/asm-generic/fcntl.h when defining
@@ -27,16 +25,37 @@
#define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK)
#define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE)
+#ifdef CONFIG_EVENTFD
+
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx);
+void eventfd_ctx_put(struct eventfd_ctx *ctx);
struct file *eventfd_fget(int fd);
-int eventfd_signal(struct file *file, int n);
+struct eventfd_ctx *eventfd_ctx_fdget(int fd);
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
+int eventfd_signal(struct eventfd_ctx *ctx, int n);
#else /* CONFIG_EVENTFD */
-#define eventfd_fget(fd) ERR_PTR(-ENOSYS)
-static inline int eventfd_signal(struct file *file, int n)
-{ return 0; }
+/*
+ * Ugly ugly ugly error layer to support modules that uses eventfd but
+ * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO.
+ */
+static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+ return ERR_PTR(-ENOSYS);
+}
-#endif /* CONFIG_EVENTFD */
+static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+{
+ return -ENOSYS;
+}
+
+static inline void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+
+}
+
+#endif
#endif /* _LINUX_EVENTFD_H */
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 634a5e5..7499b36 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -874,7 +874,7 @@
struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *);
int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result,
- int create, int extend_disksize);
+ int create);
extern struct inode *ext3_iget(struct super_block *, unsigned long);
extern int ext3_write_inode (struct inode *, int);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index dd68358..f847df9 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -819,6 +819,7 @@
int node;
int flags;
struct mutex lock; /* Lock for open/release/ioctl funcs */
+ struct mutex mm_lock; /* Lock for fb_mmap and smem_* fields */
struct fb_var_screeninfo var; /* Current var */
struct fb_fix_screeninfo fix; /* Current fix */
struct fb_monspecs monspecs; /* Current Monitor specs */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 9823946..192d1e43 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -127,6 +127,7 @@
struct delayed_work work;
int bm_retries;
int bm_generation;
+ __be32 bm_transaction_data[2];
bool broadcast_channel_allocated;
u32 broadcast_channel;
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
new file mode 100644
index 0000000..23c1ec7
--- /dev/null
+++ b/include/linux/flex_array.h
@@ -0,0 +1,47 @@
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+ union {
+ struct {
+ int element_size;
+ int total_nr_elements;
+ struct flex_array_part *parts[0];
+ };
+ /*
+ * This little trick makes sure that
+ * sizeof(flex_array) == PAGE_SIZE
+ */
+ char padding[FLEX_ARRAY_BASE_SIZE];
+ };
+};
+
+#define FLEX_ARRAY_INIT(size, total) { { {\
+ .element_size = (size), \
+ .total_nr_elements = (total), \
+} } }
+
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, int element_nr, void *src,
+ gfp_t flags);
+void *flex_array_get(struct flex_array *fa, int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0872372..67888a9 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1946,6 +1946,7 @@
extern int register_blkdev(unsigned int, const char *);
extern void unregister_blkdev(unsigned int, const char *);
extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
extern void bd_set_size(struct block_device *, loff_t size);
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
@@ -2136,7 +2137,7 @@
extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin);
-extern struct inode * inode_init_always(struct super_block *, struct inode *);
+extern int inode_init_always(struct super_block *, struct inode *);
extern void inode_init_once(struct inode *);
extern void inode_add_to_lists(struct super_block *, struct inode *);
extern void iput(struct inode *);
@@ -2163,6 +2164,7 @@
extern void iget_failed(struct inode *);
extern void clear_inode(struct inode *);
extern void destroy_inode(struct inode *);
+extern void __destroy_inode(struct inode *);
extern struct inode *new_inode(struct super_block *);
extern int should_remove_suid(struct dentry *);
extern int file_remove_suid(struct file *);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 44848aa..4d6f47b 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -280,7 +280,7 @@
assert_spin_locked(&dentry->d_lock);
parent = dentry->d_parent;
- if (fsnotify_inode_watches_children(parent->d_inode))
+ if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
else
dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
@@ -352,7 +352,7 @@
/* put here because inotify does some weird stuff when destroying watches */
extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
void *data, int data_is, const char *name,
- u32 cookie);
+ u32 cookie, gfp_t gfp);
#else
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 5c093ff..a81170d 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -89,7 +89,9 @@
TRACE_TYPE_NO_CONSUME = 3 /* Handled but ask to not consume */
};
-
+void tracing_generic_entry_update(struct trace_entry *entry,
+ unsigned long flags,
+ int pc);
struct ring_buffer_event *
trace_current_buffer_lock_reserve(int type, unsigned long len,
unsigned long flags, int pc);
@@ -119,11 +121,9 @@
void *filter;
void *mod;
-#ifdef CONFIG_EVENT_PROFILE
- atomic_t profile_count;
- int (*profile_enable)(struct ftrace_event_call *);
- void (*profile_disable)(struct ftrace_event_call *);
-#endif
+ atomic_t profile_count;
+ int (*profile_enable)(struct ftrace_event_call *);
+ void (*profile_disable)(struct ftrace_event_call *);
};
#define MAX_FILTER_PRED 32
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index d41ed59..cf593bf 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -25,6 +25,11 @@
* - add IOCTL message
* - add unsolicited notification support
* - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ * - add umask flag to input argument of open, mknod and mkdir
+ * - add notification messages for invalidation of inodes and
+ * directory entries
*/
#ifndef _LINUX_FUSE_H
@@ -36,7 +41,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 11
+#define FUSE_KERNEL_MINOR_VERSION 12
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
@@ -112,6 +117,7 @@
* INIT request/reply flags
*
* FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
*/
#define FUSE_ASYNC_READ (1 << 0)
#define FUSE_POSIX_LOCKS (1 << 1)
@@ -119,6 +125,7 @@
#define FUSE_ATOMIC_O_TRUNC (1 << 3)
#define FUSE_EXPORT_SUPPORT (1 << 4)
#define FUSE_BIG_WRITES (1 << 5)
+#define FUSE_DONT_MASK (1 << 6)
/**
* CUSE INIT request/reply flags
@@ -224,6 +231,8 @@
enum fuse_notify_code {
FUSE_NOTIFY_POLL = 1,
+ FUSE_NOTIFY_INVAL_INODE = 2,
+ FUSE_NOTIFY_INVAL_ENTRY = 3,
FUSE_NOTIFY_CODE_MAX,
};
@@ -262,14 +271,18 @@
struct fuse_attr attr;
};
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
struct fuse_mknod_in {
__u32 mode;
__u32 rdev;
+ __u32 umask;
+ __u32 padding;
};
struct fuse_mkdir_in {
__u32 mode;
- __u32 padding;
+ __u32 umask;
};
struct fuse_rename_in {
@@ -301,7 +314,14 @@
struct fuse_open_in {
__u32 flags;
+ __u32 unused;
+};
+
+struct fuse_create_in {
+ __u32 flags;
__u32 mode;
+ __u32 umask;
+ __u32 padding;
};
struct fuse_open_out {
@@ -508,4 +528,16 @@
#define FUSE_DIRENT_SIZE(d) \
FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
+struct fuse_notify_inval_inode_out {
+ __u64 ino;
+ __s64 off;
+ __s64 len;
+};
+
+struct fuse_notify_inval_entry_out {
+ __u64 parent;
+ __u32 namelen;
+ __u32 padding;
+};
+
#endif /* _LINUX_FUSE_H */
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 4525747..8246c69 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -2,7 +2,9 @@
#define LINUX_HARDIRQ_H
#include <linux/preempt.h>
+#ifdef CONFIG_PREEMPT
#include <linux/smp_lock.h>
+#endif
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <asm/hardirq.h>
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 7400900..4759917 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -21,6 +21,7 @@
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/percpu.h>
+#include <linux/timer.h>
struct hrtimer_clock_base;
@@ -447,6 +448,8 @@
static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
{
+ if (likely(!timer->start_site))
+ return;
timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
timer->function, timer->start_comm, 0);
}
@@ -456,6 +459,8 @@
static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
{
+ if (likely(!timer_stats_active))
+ return;
__timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0));
}
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 95c6e00..edc93a6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1062,7 +1062,6 @@
extern int ide_vlb_clk;
extern int ide_pci_clk;
-unsigned int ide_rq_bytes(struct request *);
int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
void ide_kill_rq(ide_drive_t *, struct request *);
@@ -1361,7 +1360,6 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
int ide_dma_good_drive(ide_drive_t *);
int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
@@ -1402,7 +1400,6 @@
ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
#else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
@@ -1422,6 +1419,7 @@
#ifdef CONFIG_BLK_DEV_IDEACPI
int ide_acpi_init(void);
+bool ide_port_acpi(ide_hwif_t *hwif);
extern int ide_acpi_exec_tfs(ide_drive_t *drive);
extern void ide_acpi_get_timing(ide_hwif_t *hwif);
extern void ide_acpi_push_timing(ide_hwif_t *hwif);
@@ -1430,6 +1428,7 @@
extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
#else
static inline int ide_acpi_init(void) { return 0; }
+static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index ae3a187..70fdba2 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -78,6 +78,7 @@
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_TIPC 0x88CA /* TIPC */
+#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/include/linux/ima.h b/include/linux/ima.h
index b1b827d..0e3f2a4 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -24,6 +24,7 @@
extern void ima_file_free(struct file *file);
extern int ima_file_mmap(struct file *file, unsigned long prot);
extern void ima_counts_get(struct file *file);
+extern void ima_counts_put(struct path *path, int mask);
#else
static inline int ima_bprm_check(struct linux_binprm *bprm)
@@ -60,5 +61,10 @@
{
return;
}
+
+static inline void ima_counts_put(struct path *path, int mask)
+{
+ return;
+}
#endif /* CONFIG_IMA_H */
#endif /* _LINUX_IMA_H */
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index acef2a7..ad27c7d 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -82,7 +82,7 @@
#define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING)
#define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
-#define IN_DEV_RPFILTER(in_dev) IN_DEV_ANDCONF((in_dev), RP_FILTER)
+#define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER)
#define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \
ACCEPT_SOURCE_ROUTE)
#define IN_DEV_BOOTP_RELAY(in_dev) IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 5368fbd..7fc01b1 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -183,5 +183,8 @@
LIST_HEAD_INIT(cpu_timers[2]), \
}
+/* Attach to the init_task data structure for proper alignment */
+#define __init_task_data __attribute__((__section__(".data.init_task")))
+
#endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
new file mode 100644
index 0000000..15d5903
--- /dev/null
+++ b/include/linux/input/matrix_keypad.h
@@ -0,0 +1,66 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define MATRIX_MAX_ROWS 16
+#define MATRIX_MAX_COLS 16
+
+#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+ (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+ (val & 0xffff))
+
+#define KEY_ROW(k) (((k) >> 24) & 0xff)
+#define KEY_COL(k) (((k) >> 16) & 0xff)
+#define KEY_VAL(k) ((k) & 0xffff)
+
+#define MATRIX_SCAN_CODE(row, col, row_shift) (((row) << (row_shift)) + (col))
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ * representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+ const uint32_t *keymap;
+ unsigned int keymap_size;
+};
+
+/**
+ * struct matrix_keypad_platform_data - platform-dependent keypad data
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @row_gpios: pointer to array of gpio numbers representing rows
+ * @col_gpios: pointer to array of gpio numbers reporesenting colums
+ * @num_row_gpios: actual number of row gpios used by device
+ * @num_col_gpios: actual number of col gpios used by device
+ * @col_scan_delay_us: delay, measured in microseconds, that is
+ * needed before we can keypad after activating column gpio
+ * @debounce_ms: debounce interval in milliseconds
+ *
+ * This structure represents platform-specific data that use used by
+ * matrix_keypad driver to perform proper initialization.
+ */
+struct matrix_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+
+ const unsigned int *row_gpios;
+ const unsigned int *col_gpios;
+
+ unsigned int num_row_gpios;
+ unsigned int num_col_gpios;
+
+ unsigned int col_scan_delay_us;
+
+ /* key debounce interval in milli-second */
+ unsigned int debounce_ms;
+
+ bool active_low;
+ bool wakeup;
+};
+
+#endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 2721f07..35e7df1 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -14,6 +14,7 @@
#include <linux/irqflags.h>
#include <linux/smp.h>
#include <linux/percpu.h>
+#include <linux/hrtimer.h>
#include <asm/atomic.h>
#include <asm/ptrace.h>
@@ -64,11 +65,13 @@
* IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
* IRQTF_DIED - handler thread died
* IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
+ * IRQTF_AFFINITY - irq thread is requested to adjust affinity
*/
enum {
IRQTF_RUNTHREAD,
IRQTF_DIED,
IRQTF_WARNED,
+ IRQTF_AFFINITY,
};
typedef irqreturn_t (*irq_handler_t)(int, void *);
@@ -517,6 +520,31 @@
extern void tasklet_init(struct tasklet_struct *t,
void (*func)(unsigned long), unsigned long data);
+struct tasklet_hrtimer {
+ struct hrtimer timer;
+ struct tasklet_struct tasklet;
+ enum hrtimer_restart (*function)(struct hrtimer *);
+};
+
+extern void
+tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+ enum hrtimer_restart (*function)(struct hrtimer *),
+ clockid_t which_clock, enum hrtimer_mode mode);
+
+static inline
+int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
+ const enum hrtimer_mode mode)
+{
+ return hrtimer_start(&ttimer->timer, time, mode);
+}
+
+static inline
+void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
+{
+ hrtimer_cancel(&ttimer->timer);
+ tasklet_kill(&ttimer->tasklet);
+}
+
/*
* Autoprobing for irqs:
*
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dd05434..4da4a75 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -92,7 +92,7 @@
* a race).
*/
if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
- atomic_long_inc(&ioc->refcount);
+ atomic_inc(&ioc->nr_tasks);
return ioc;
}
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fac104e..d6320a3 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -303,6 +303,7 @@
extern int panic_timeout;
extern int panic_on_oops;
extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
extern const char *print_tainted(void);
extern void add_taint(unsigned flag);
extern int test_taint(unsigned flag);
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
index 7796aed..6a63807 100644
--- a/include/linux/kmemleak.h
+++ b/include/linux/kmemleak.h
@@ -27,6 +27,7 @@
extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
gfp_t gfp);
extern void kmemleak_free(const void *ptr);
+extern void kmemleak_free_part(const void *ptr, size_t size);
extern void kmemleak_padding(const void *ptr, unsigned long offset,
size_t size);
extern void kmemleak_not_leak(const void *ptr);
@@ -71,6 +72,9 @@
static inline void kmemleak_free(const void *ptr)
{
}
+static inline void kmemleak_free_part(const void *ptr, size_t size)
+{
+}
static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
{
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index aacc544..3060bdc3 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -110,6 +110,7 @@
struct kvm_kernel_irq_routing_entry {
u32 gsi;
+ u32 type;
int (*set)(struct kvm_kernel_irq_routing_entry *e,
struct kvm *kvm, int level);
union {
@@ -125,6 +126,7 @@
struct kvm {
struct mutex lock; /* protects the vcpus array and APIC accesses */
spinlock_t mmu_lock;
+ spinlock_t requests_lock;
struct rw_semaphore slots_lock;
struct mm_struct *mm; /* userspace tied to this vm */
int nmemslots;
diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h
new file mode 100644
index 0000000..afc9f9f
--- /dev/null
+++ b/include/linux/leds-lp3944.h
@@ -0,0 +1,53 @@
+/*
+ * leds-lp3944.h - platform data structure for lp3944 led controller
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_LP3944_H
+#define __LINUX_LEDS_LP3944_H
+
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+
+#define LP3944_LED0 0
+#define LP3944_LED1 1
+#define LP3944_LED2 2
+#define LP3944_LED3 3
+#define LP3944_LED4 4
+#define LP3944_LED5 5
+#define LP3944_LED6 6
+#define LP3944_LED7 7
+#define LP3944_LEDS_MAX 8
+
+#define LP3944_LED_STATUS_MASK 0x03
+enum lp3944_status {
+ LP3944_LED_STATUS_OFF = 0x0,
+ LP3944_LED_STATUS_ON = 0x1,
+ LP3944_LED_STATUS_DIM0 = 0x2,
+ LP3944_LED_STATUS_DIM1 = 0x3
+};
+
+enum lp3944_type {
+ LP3944_LED_TYPE_NONE,
+ LP3944_LED_TYPE_LED,
+ LP3944_LED_TYPE_LED_INVERTED,
+};
+
+struct lp3944_led {
+ char *name;
+ enum lp3944_type type;
+ enum lp3944_status status;
+};
+
+struct lp3944_platform_data {
+ struct lp3944_led leds[LP3944_LEDS_MAX];
+ u8 leds_size;
+};
+
+#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 376fe07..d8bf966 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -45,7 +45,10 @@
/* Get LED brightness level */
enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
- /* Activate hardware accelerated blink */
+ /* Activate hardware accelerated blink, delays are in
+ * miliseconds and if none is provided then a sensible default
+ * should be chosen. The call can adjust the timings if it can't
+ * match the values specified exactly. */
int (*blink_set)(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off);
@@ -141,9 +144,14 @@
const char *name;
const char *default_trigger;
unsigned gpio;
- u8 active_low : 1;
- u8 retain_state_suspended : 1;
+ unsigned active_low : 1;
+ unsigned retain_state_suspended : 1;
+ unsigned default_state : 2;
+ /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
};
+#define LEDS_GPIO_DEFSTATE_OFF 0
+#define LEDS_GPIO_DEFSTATE_ON 1
+#define LEDS_GPIO_DEFSTATE_KEEP 2
struct gpio_led_platform_data {
int num_leds;
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 7bc1440..2fb1dcb 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -1,5 +1,7 @@
-/* Things the lguest guest needs to know. Note: like all lguest interfaces,
- * this is subject to wild and random change between versions. */
+/*
+ * Things the lguest guest needs to know. Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
#ifndef _LINUX_LGUEST_H
#define _LINUX_LGUEST_H
@@ -11,32 +13,41 @@
#define LG_CLOCK_MIN_DELTA 100UL
#define LG_CLOCK_MAX_DELTA ULONG_MAX
-/*G:032 The second method of communicating with the Host is to via "struct
+/*G:031
+ * The second method of communicating with the Host is to via "struct
* lguest_data". Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it. :*/
-struct lguest_data
-{
- /* 512 == enabled (same as eflags in normal hardware). The Guest
- * changes interrupts so often that a hypercall is too slow. */
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+ /*
+ * 512 == enabled (same as eflags in normal hardware). The Guest
+ * changes interrupts so often that a hypercall is too slow.
+ */
unsigned int irq_enabled;
/* Fine-grained interrupt disabling by the Guest */
DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
- /* The Host writes the virtual address of the last page fault here,
+ /*
+ * The Host writes the virtual address of the last page fault here,
* which saves the Guest a hypercall. CR2 is the native register where
- * this address would normally be found. */
+ * this address would normally be found.
+ */
unsigned long cr2;
/* Wallclock time set by the Host. */
struct timespec time;
- /* Interrupt pending set by the Host. The Guest should do a hypercall
- * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+ /*
+ * Interrupt pending set by the Host. The Guest should do a hypercall
+ * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+ */
int irq_pending;
- /* Async hypercall ring. Instead of directly making hypercalls, we can
+ /*
+ * Async hypercall ring. Instead of directly making hypercalls, we can
* place them in here for processing the next time the Host wants.
- * This batching can be quite efficient. */
+ * This batching can be quite efficient.
+ */
/* 0xFF == done (set by Host), 0 == pending (set by Guest). */
u8 hcall_status[LHCALL_RING_SIZE];
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index bfefbdf..495203f 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -29,8 +29,10 @@
__u8 type;
/* The number of virtqueues (first in config array) */
__u8 num_vq;
- /* The number of bytes of feature bits. Multiply by 2: one for host
- * features and one for Guest acknowledgements. */
+ /*
+ * The number of bytes of feature bits. Multiply by 2: one for host
+ * features and one for Guest acknowledgements.
+ */
__u8 feature_len;
/* The number of bytes of the config array after virtqueues. */
__u8 config_len;
@@ -39,8 +41,10 @@
__u8 config[0];
};
-/*D:135 This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space. */
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
struct lguest_vqconfig {
/* The number of entries in the virtio_ring */
__u16 num;
@@ -61,7 +65,9 @@
LHREQ_EVENTFD, /* + address, fd. */
};
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons. */
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
#define LGUEST_VRING_ALIGN 4096
#endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3d501db..e5b6e33 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -385,6 +385,7 @@
not multiple of 16 bytes */
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
+ ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -588,6 +589,7 @@
#endif
/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
+ u64 n_native_sectors; /* native size, if ATA */
unsigned int class; /* ATA_DEV_xxx */
unsigned long unpark_deadline;
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index fee9e59..691f591 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -22,6 +22,15 @@
#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE)
/*
+ * For assembly routines.
+ *
+ * Note when using these that you must specify the appropriate
+ * alignment directives yourself
+ */
+#define __PAGE_ALIGNED_DATA .section ".data.page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS .section ".bss.page_aligned", "aw"
+
+/*
* This is used by architectures to keep arguments on the stack
* untouched by the compiler by keeping them live until the end.
* The argument stack may be owned by the assembly-language
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d006e93..ba3a7cb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -826,7 +826,7 @@
extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas);
int get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages);
diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h
index 3beb259..d74785c 100644
--- a/include/linux/mnt_namespace.h
+++ b/include/linux/mnt_namespace.h
@@ -2,10 +2,9 @@
#define _NAMESPACE_H_
#ifdef __KERNEL__
-#include <linux/mount.h>
-#include <linux/sched.h>
-#include <linux/nsproxy.h>
+#include <linux/path.h>
#include <linux/seq_file.h>
+#include <linux/wait.h>
struct mnt_namespace {
atomic_t count;
@@ -28,14 +27,6 @@
extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
struct fs_struct *);
extern void put_mnt_ns(struct mnt_namespace *ns);
-
-static inline void exit_mnt_ns(struct task_struct *p)
-{
- struct mnt_namespace *ns = p->nsproxy->mnt_ns;
- if (ns)
- put_mnt_ns(ns);
-}
-
static inline void get_mnt_ns(struct mnt_namespace *ns)
{
atomic_inc(&ns->count);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 5675b63..0f32a9b 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -251,7 +251,7 @@
static inline struct mtd_info *dev_to_mtd(struct device *dev)
{
- return dev ? container_of(dev, struct mtd_info, dev) : NULL;
+ return dev ? dev_get_drvdata(dev) : NULL;
}
static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index af6dcb9..b70313d 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -47,6 +47,8 @@
#define MTDPART_SIZ_FULL (0)
+struct mtd_info;
+
int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
int del_mtd_partitions(struct mtd_info *);
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 3430c77..7ae0533 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -81,4 +81,17 @@
__u8 state_mask, status_mask;
};
+struct xt_conntrack_mtinfo2 {
+ union nf_inet_addr origsrc_addr, origsrc_mask;
+ union nf_inet_addr origdst_addr, origdst_mask;
+ union nf_inet_addr replsrc_addr, replsrc_mask;
+ union nf_inet_addr repldst_addr, repldst_mask;
+ __u32 expires_min, expires_max;
+ __u16 l4proto;
+ __be16 origsrc_port, origdst_port;
+ __be16 replsrc_port, repldst_port;
+ __u16 match_flags, invert_flags;
+ __u16 state_mask, status_mask;
+};
+
#endif /*_XT_CONNTRACK_H*/
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
index fd2272e..18afa49 100644
--- a/include/linux/netfilter/xt_osf.h
+++ b/include/linux/netfilter/xt_osf.h
@@ -20,6 +20,8 @@
#ifndef _XT_OSF_H
#define _XT_OSF_H
+#include <linux/types.h>
+
#define MAXGENRELEN 32
#define XT_OSF_GENRE (1<<0)
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index fdffb41..f6b9024 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -473,7 +473,6 @@
extern int nfs_flush_incompatible(struct file *file, struct page *page);
extern int nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
extern int nfs_writeback_done(struct rpc_task *, struct nfs_write_data *);
-extern void nfs_writedata_release(void *);
/*
* Try to write back everything synchronously (but check the
@@ -488,7 +487,6 @@
extern int nfs_commit_inode(struct inode *, int);
extern struct nfs_write_data *nfs_commitdata_alloc(void);
extern void nfs_commit_free(struct nfs_write_data *wdata);
-extern void nfs_commitdata_release(void *wdata);
#else
static inline int
nfs_commit_inode(struct inode *inode, int how)
@@ -507,6 +505,7 @@
* Allocate nfs_write_data structures
*/
extern struct nfs_write_data *nfs_writedata_alloc(unsigned int npages);
+extern void nfs_writedata_free(struct nfs_write_data *);
/*
* linux/fs/nfs/read.c
@@ -515,7 +514,6 @@
extern int nfs_readpages(struct file *, struct address_space *,
struct list_head *, unsigned);
extern int nfs_readpage_result(struct rpc_task *, struct nfs_read_data *);
-extern void nfs_readdata_release(void *data);
extern int nfs_readpage_async(struct nfs_open_context *, struct inode *,
struct page *);
@@ -523,6 +521,7 @@
* Allocate nfs_read_data structures
*/
extern struct nfs_read_data *nfs_readdata_alloc(unsigned int npages);
+extern void nfs_readdata_free(struct nfs_read_data *);
/*
* linux/fs/nfs3proc.c
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index 19fe15d..320569e 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -167,6 +167,15 @@
#define NFS_CAP_SYMLINKS (1U << 2)
#define NFS_CAP_ACLS (1U << 3)
#define NFS_CAP_ATOMIC_OPEN (1U << 4)
+#define NFS_CAP_CHANGE_ATTR (1U << 5)
+#define NFS_CAP_FILEID (1U << 6)
+#define NFS_CAP_MODE (1U << 7)
+#define NFS_CAP_NLINK (1U << 8)
+#define NFS_CAP_OWNER (1U << 9)
+#define NFS_CAP_OWNER_GROUP (1U << 10)
+#define NFS_CAP_ATIME (1U << 11)
+#define NFS_CAP_CTIME (1U << 12)
+#define NFS_CAP_MTIME (1U << 13)
/* maximum number of slots to use */
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index 829b94b..b359c4a 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -82,6 +82,12 @@
* to generate slightly worse code. So use a simple one-line #define
* for node_isset(), instead of wrapping an inline inside a macro, the
* way we do the other calls.
+ *
+ * NODEMASK_SCRATCH
+ * When doing above logical AND, OR, XOR, Remap operations the callers tend to
+ * need temporary nodemask_t's on the stack. But if NODES_SHIFT is large,
+ * nodemask_t's consume too much stack space. NODEMASK_SCRATCH is a helper
+ * for such situations. See below and CPUMASK_ALLOC also.
*/
#include <linux/kernel.h>
@@ -473,4 +479,26 @@
#define for_each_node(node) for_each_node_state(node, N_POSSIBLE)
#define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
+/*
+ * For nodemask scrach area.(See CPUMASK_ALLOC() in cpumask.h)
+ */
+
+#if NODES_SHIFT > 8 /* nodemask_t > 64 bytes */
+#define NODEMASK_ALLOC(x, m) struct x *m = kmalloc(sizeof(*m), GFP_KERNEL)
+#define NODEMASK_FREE(m) kfree(m)
+#else
+#define NODEMASK_ALLOC(x, m) struct x _m, *m = &_m
+#define NODEMASK_FREE(m)
+#endif
+
+/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
+struct nodemask_scratch {
+ nodemask_t mask1;
+ nodemask_t mask2;
+};
+
+#define NODEMASK_SCRATCH(x) NODEMASK_ALLOC(nodemask_scratch, x)
+#define NODEMASK_SCRATCH_FREE(x) NODEMASK_FREE(x)
+
+
#endif /* __LINUX_NODEMASK_H */
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index c9663c6..53b94e0 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -18,5 +18,8 @@
struct device_node *phy_np,
void (*hndlr)(struct net_device *),
u32 flags, phy_interface_t iface);
+extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+ void (*hndlr)(struct net_device *),
+ phy_interface_t iface);
#endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d304ddf..115fb7b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1145,7 +1145,7 @@
/* If you want to know what to call your pci_dev, ask this function.
* Again, it's a wrapper around the generic device.
*/
-static inline const char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(const struct pci_dev *pdev)
{
return dev_name(&pdev->dev);
}
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a3b0003..73b46b6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2645,6 +2645,7 @@
#define PCI_DEVICE_ID_NETMOS_9835 0x9835
#define PCI_DEVICE_ID_NETMOS_9845 0x9845
#define PCI_DEVICE_ID_NETMOS_9855 0x9855
+#define PCI_DEVICE_ID_NETMOS_9901 0x9901
#define PCI_VENDOR_ID_3COM_2 0xa727
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 8f921d7..68438e1 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -24,7 +24,8 @@
#define DEFINE_PER_CPU_SECTION(type, name, section) \
__attribute__((__section__(PER_CPU_BASE_SECTION section))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+ PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES \
+ __typeof__(type) per_cpu__##name
/*
* Variant on the per-CPU variable declaration/definition theme used for
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 89698d8..b53f700 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -115,26 +115,44 @@
PERF_SAMPLE_TID = 1U << 1,
PERF_SAMPLE_TIME = 1U << 2,
PERF_SAMPLE_ADDR = 1U << 3,
- PERF_SAMPLE_GROUP = 1U << 4,
+ PERF_SAMPLE_READ = 1U << 4,
PERF_SAMPLE_CALLCHAIN = 1U << 5,
PERF_SAMPLE_ID = 1U << 6,
PERF_SAMPLE_CPU = 1U << 7,
PERF_SAMPLE_PERIOD = 1U << 8,
+ PERF_SAMPLE_STREAM_ID = 1U << 9,
+ PERF_SAMPLE_RAW = 1U << 10,
- PERF_SAMPLE_MAX = 1U << 9, /* non-ABI */
+ PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */
};
/*
- * Bits that can be set in attr.read_format to request that
- * reads on the counter should return the indicated quantities,
- * in increasing order of bit value, after the counter value.
+ * The format of the data returned by read() on a perf counter fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ * { u64 value;
+ * { u64 time_enabled; } && PERF_FORMAT_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 id; } && PERF_FORMAT_ID
+ * } && !PERF_FORMAT_GROUP
+ *
+ * { u64 nr;
+ * { u64 time_enabled; } && PERF_FORMAT_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 value;
+ * { u64 id; } && PERF_FORMAT_ID
+ * } cntr[nr];
+ * } && PERF_FORMAT_GROUP
+ * };
*/
enum perf_counter_read_format {
PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
PERF_FORMAT_ID = 1U << 2,
+ PERF_FORMAT_GROUP = 1U << 3,
- PERF_FORMAT_MAX = 1U << 3, /* non-ABI */
+ PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
};
#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
@@ -178,8 +196,11 @@
mmap : 1, /* include mmap data */
comm : 1, /* include comm data */
freq : 1, /* use freq, not period */
+ inherit_stat : 1, /* per task counts */
+ enable_on_exec : 1, /* next exec enables */
+ task : 1, /* trace fork/exit */
- __reserved_1 : 53;
+ __reserved_1 : 50;
__u32 wakeup_events; /* wakeup every n events */
__u32 __reserved_2;
@@ -232,6 +253,14 @@
__u32 lock; /* seqlock for synchronization */
__u32 index; /* hardware counter identifier */
__s64 offset; /* add to hardware counter value */
+ __u64 time_enabled; /* time counter active */
+ __u64 time_running; /* time counter on cpu */
+
+ /*
+ * Hole for extension of the self monitor capabilities
+ */
+
+ __u64 __reserved[123]; /* align to 1k */
/*
* Control data for the mmap() data buffer.
@@ -253,7 +282,6 @@
#define PERF_EVENT_MISC_KERNEL (1 << 0)
#define PERF_EVENT_MISC_USER (2 << 0)
#define PERF_EVENT_MISC_HYPERVISOR (3 << 0)
-#define PERF_EVENT_MISC_OVERFLOW (1 << 2)
struct perf_event_header {
__u32 type;
@@ -301,18 +329,18 @@
/*
* struct {
* struct perf_event_header header;
- * u64 time;
- * u64 id;
- * u64 sample_period;
+ * u32 pid, ppid;
+ * u32 tid, ptid;
* };
*/
- PERF_EVENT_PERIOD = 4,
+ PERF_EVENT_EXIT = 4,
/*
* struct {
* struct perf_event_header header;
* u64 time;
* u64 id;
+ * u64 stream_id;
* };
*/
PERF_EVENT_THROTTLE = 5,
@@ -322,14 +350,22 @@
* struct {
* struct perf_event_header header;
* u32 pid, ppid;
+ * u32 tid, ptid;
* };
*/
PERF_EVENT_FORK = 7,
/*
- * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
- * will be PERF_SAMPLE_*
+ * struct {
+ * struct perf_event_header header;
+ * u32 pid, tid;
*
+ * struct read_format values;
+ * };
+ */
+ PERF_EVENT_READ = 8,
+
+ /*
* struct {
* struct perf_event_header header;
*
@@ -337,16 +373,34 @@
* { u32 pid, tid; } && PERF_SAMPLE_TID
* { u64 time; } && PERF_SAMPLE_TIME
* { u64 addr; } && PERF_SAMPLE_ADDR
- * { u64 config; } && PERF_SAMPLE_CONFIG
+ * { u64 id; } && PERF_SAMPLE_ID
+ * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
* { u32 cpu, res; } && PERF_SAMPLE_CPU
+ * { u64 period; } && PERF_SAMPLE_PERIOD
*
- * { u64 nr;
- * { u64 id, val; } cnt[nr]; } && PERF_SAMPLE_GROUP
+ * { struct read_format values; } && PERF_SAMPLE_READ
*
* { u64 nr,
* u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
+ *
+ * #
+ * # The RAW record below is opaque data wrt the ABI
+ * #
+ * # That is, the ABI doesn't make any promises wrt to
+ * # the stability of its content, it may vary depending
+ * # on event, hardware, kernel version and phase of
+ * # the moon.
+ * #
+ * # In other words, PERF_SAMPLE_RAW contents are not an ABI.
+ * #
+ *
+ * { u32 size;
+ * char data[size];}&& PERF_SAMPLE_RAW
* };
*/
+ PERF_EVENT_SAMPLE = 9,
+
+ PERF_EVENT_MAX, /* non-ABI */
};
enum perf_callchain_context {
@@ -387,6 +441,11 @@
__u64 ip[PERF_MAX_STACK_DEPTH];
};
+struct perf_raw_record {
+ u32 size;
+ void *data;
+};
+
struct task_struct;
/**
@@ -582,6 +641,7 @@
int nr_counters;
int nr_active;
int is_active;
+ int nr_stat;
atomic_t refcount;
struct task_struct *task;
@@ -654,10 +714,13 @@
struct pt_regs *regs;
u64 addr;
u64 period;
+ struct perf_raw_record *raw;
};
extern int perf_counter_overflow(struct perf_counter *counter, int nmi,
struct perf_sample_data *data);
+extern void perf_counter_output(struct perf_counter *counter, int nmi,
+ struct perf_sample_data *data);
/*
* Return 1 for a software counter, 0 for a hardware counter
@@ -669,7 +732,16 @@
(counter->attr.type != PERF_TYPE_HW_CACHE);
}
-extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+
+static inline void
+perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+{
+ if (atomic_read(&perf_swcounter_enabled[event]))
+ __perf_swcounter_event(event, nr, nmi, regs, addr);
+}
extern void __perf_counter_mmap(struct vm_area_struct *vma);
diff --git a/include/linux/personality.h b/include/linux/personality.h
index a84e9ff..1261208 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -40,7 +40,10 @@
* Security-relevant compatibility flags that must be
* cleared upon setuid or setgid exec:
*/
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE)
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \
+ ADDR_NO_RANDOMIZE | \
+ ADDR_COMPAT_LAYOUT | \
+ MMAP_PAGE_ZERO)
/*
* Personality types.
diff --git a/include/linux/pps.h b/include/linux/pps.h
index cfe5c72..0194ab0 100644
--- a/include/linux/pps.h
+++ b/include/linux/pps.h
@@ -22,6 +22,8 @@
#ifndef _PPS_H_
#define _PPS_H_
+#include <linux/types.h>
+
#define PPS_VERSION "5.3.6"
#define PPS_MAX_SOURCES 16 /* should be enough... */
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 7bc4575..26361c4 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -7,7 +7,6 @@
#ifndef _LINUX_QUOTAOPS_
#define _LINUX_QUOTAOPS_
-#include <linux/smp_lock.h>
#include <linux/fs.h>
static inline struct quota_info *sb_dqopt(struct super_block *sb)
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e73e242..278777fa 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -99,7 +99,6 @@
#undef RFKILL_STATE_UNBLOCKED
#undef RFKILL_STATE_HARD_BLOCKED
-#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
@@ -225,7 +224,7 @@
* should be blocked) so that drivers need not keep track of the soft
* block state -- which they might not be able to.
*/
-bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
/**
* rfkill_set_sw_state - Set the internal rfkill software block state
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index e599698..9aaf5bf 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -242,6 +242,8 @@
*/
#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */
+#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */
+#define SG_MITER_FROM_SG (1 << 2) /* nop */
struct sg_mapping_iter {
/* the following three fields can be accessed directly */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4d07542..3ab08e4 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -209,7 +209,7 @@
((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
#define task_contributes_to_load(task) \
((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
- (task->flags & PF_FROZEN) == 0)
+ (task->flags & PF_FREEZING) == 0)
#define __set_task_state(tsk, state_value) \
do { (tsk)->state = (state_value); } while (0)
@@ -349,8 +349,20 @@
struct nsproxy;
struct user_namespace;
-/* Maximum number of active map areas.. This is a random (large) number */
-#define DEFAULT_MAX_MAP_COUNT 65536
+/*
+ * Default maximum number of active map areas, this limits the number of vmas
+ * per mm struct. Users can overwrite this number by sysctl but there is a
+ * problem.
+ *
+ * When a program's coredump is generated as ELF format, a section is created
+ * per a vma. In ELF, the number of sections is represented in unsigned short.
+ * This means the number of sections should be smaller than 65535 at coredump.
+ * Because the kernel adds some informative sections to a image of program at
+ * generating coredump, we need some margin. The number of extra sections is
+ * 1-3 now and depends on arch. We use "5" as safe margin, here.
+ */
+#define MAPCOUNT_ELF_CORE_MARGIN (5)
+#define DEFAULT_MAX_MAP_COUNT (USHORT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
extern int sysctl_max_map_count;
@@ -486,6 +498,15 @@
.sum_exec_runtime = 0, \
}
+/*
+ * Disable preemption until the scheduler is running.
+ * Reset by start_kernel()->sched_init()->init_idle().
+ *
+ * We include PREEMPT_ACTIVE to avoid cond_resched() from working
+ * before the scheduler is active -- see should_resched().
+ */
+#define INIT_PREEMPT_COUNT (1 + PREEMPT_ACTIVE)
+
/**
* struct thread_group_cputimer - thread group interval timer counts
* @cputime: thread group interval timers.
@@ -1659,6 +1680,7 @@
#define PF_MEMALLOC 0x00000800 /* Allocating memory */
#define PF_FLUSHER 0x00001000 /* responsible for disk writeback */
#define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */
+#define PF_FREEZING 0x00004000 /* freeze in progress. do not account to load */
#define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */
#define PF_FROZEN 0x00010000 /* frozen for system suspend */
#define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b47b3f0..f2c69a2 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1342,12 +1342,12 @@
* shifting the start of the packet by 2 bytes. Drivers should do this
* with:
*
- * skb_reserve(NET_IP_ALIGN);
+ * skb_reserve(skb, NET_IP_ALIGN);
*
* The downside to this alignment of the IP header is that the DMA is now
* unaligned. On some architectures the cost of an unaligned DMA is high
* and this cost outweighs the gains made by aligning the IP header.
- *
+ *
* Since this trade off varies between architectures, we allow NET_IP_ALIGN
* to be overridden.
*/
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 4dcbc2c..c1c862b 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -11,6 +11,7 @@
#include <linux/workqueue.h>
#include <linux/kobject.h>
#include <linux/kmemtrace.h>
+#include <linux/kmemleak.h>
enum stat_item {
ALLOC_FASTPATH, /* Allocation from cpu slab */
@@ -233,6 +234,7 @@
unsigned int order = get_order(size);
void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order);
+ kmemleak_alloc(ret, size, 1, flags);
trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags);
return ret;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9c4cd27..c47c4b4 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -80,6 +80,8 @@
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
#define SPI_3WIRE 0x10 /* SI/SO signals shared */
#define SPI_LOOP 0x20 /* loopback mode */
+#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */
+#define SPI_READY 0x80 /* slave pulls low to pause */
u8 bits_per_word;
int irq;
void *controller_state;
@@ -248,6 +250,10 @@
/* spi_device.mode flags understood by this controller driver */
u16 mode_bits;
+ /* other constraints relevant to this driver */
+ u16 flags;
+#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */
+
/* Setup mode and clock, etc (spi driver may call many times).
*
* IMPORTANT: this may be called when transfers to another
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index 95251cc..bf0570a 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -40,6 +40,8 @@
#define SPI_LSB_FIRST 0x08
#define SPI_3WIRE 0x10
#define SPI_LOOP 0x20
+#define SPI_NO_CS 0x40
+#define SPI_READY 0x80
/*---------------------------------------------------------------------------*/
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 252b245..4be57ab 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -132,6 +132,11 @@
#endif /*__raw_spin_is_contended*/
#endif
+/* The lock does not imply full memory barrier. */
+#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK
+static inline void smp_mb__after_lock(void) { smp_mb(); }
+#endif
+
/**
* spin_unlock_wait - wait until the spinlock gets unlocked
* @lock: the spinlock in question.
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index 2d8b211..6f52b4d 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -59,6 +59,15 @@
#define CACHE_NEW_EXPIRY 120 /* keep new things pending confirmation for 120 seconds */
+struct cache_detail_procfs {
+ struct proc_dir_entry *proc_ent;
+ struct proc_dir_entry *flush_ent, *channel_ent, *content_ent;
+};
+
+struct cache_detail_pipefs {
+ struct dentry *dir;
+};
+
struct cache_detail {
struct module * owner;
int hash_size;
@@ -70,15 +79,17 @@
char *name;
void (*cache_put)(struct kref *);
- void (*cache_request)(struct cache_detail *cd,
- struct cache_head *h,
- char **bpp, int *blen);
+ int (*cache_upcall)(struct cache_detail *,
+ struct cache_head *);
+
int (*cache_parse)(struct cache_detail *,
char *buf, int len);
int (*cache_show)(struct seq_file *m,
struct cache_detail *cd,
struct cache_head *h);
+ void (*warn_no_listener)(struct cache_detail *cd,
+ int has_died);
struct cache_head * (*alloc)(void);
int (*match)(struct cache_head *orig, struct cache_head *new);
@@ -96,13 +107,15 @@
/* fields for communication over channel */
struct list_head queue;
- struct proc_dir_entry *proc_ent;
- struct proc_dir_entry *flush_ent, *channel_ent, *content_ent;
atomic_t readers; /* how many time is /chennel open */
time_t last_close; /* if no readers, when did last close */
time_t last_warn; /* when we last warned about no readers */
- void (*warn_no_listener)(struct cache_detail *cd);
+
+ union {
+ struct cache_detail_procfs procfs;
+ struct cache_detail_pipefs pipefs;
+ } u;
};
@@ -127,6 +140,10 @@
};
+extern const struct file_operations cache_file_operations_pipefs;
+extern const struct file_operations content_file_operations_pipefs;
+extern const struct file_operations cache_flush_operations_pipefs;
+
extern struct cache_head *
sunrpc_cache_lookup(struct cache_detail *detail,
struct cache_head *key, int hash);
@@ -134,6 +151,13 @@
sunrpc_cache_update(struct cache_detail *detail,
struct cache_head *new, struct cache_head *old, int hash);
+extern int
+sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h,
+ void (*cache_request)(struct cache_detail *,
+ struct cache_head *,
+ char **,
+ int *));
+
extern void cache_clean_deferred(void *owner);
@@ -171,6 +195,10 @@
extern int cache_register(struct cache_detail *cd);
extern void cache_unregister(struct cache_detail *cd);
+extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *,
+ mode_t, struct cache_detail *);
+extern void sunrpc_cache_unregister_pipefs(struct cache_detail *);
+
extern void qword_add(char **bpp, int *lp, char *str);
extern void qword_addhex(char **bpp, int *lp, char *buf, int blen);
extern int qword_get(char **bpp, char *dest, int bufsize);
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 37881f1a..ab3f6e9 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -9,6 +9,10 @@
#ifndef _LINUX_SUNRPC_CLNT_H
#define _LINUX_SUNRPC_CLNT_H
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
#include <linux/sunrpc/msg_prot.h>
#include <linux/sunrpc/sched.h>
#include <linux/sunrpc/xprt.h>
@@ -17,6 +21,7 @@
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/timer.h>
#include <asm/signal.h>
+#include <linux/path.h>
struct rpc_inode;
@@ -50,9 +55,7 @@
int cl_nodelen; /* nodename length */
char cl_nodename[UNX_MAXNODENAME];
- char cl_pathname[30];/* Path in rpc_pipe_fs */
- struct vfsmount * cl_vfsmnt;
- struct dentry * cl_dentry; /* inode */
+ struct path cl_path;
struct rpc_clnt * cl_parent; /* Points to parent of clones */
struct rpc_rtt cl_rtt_default;
struct rpc_timeout cl_timeout_default;
@@ -151,5 +154,39 @@
size_t rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t);
const char *rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t);
+size_t rpc_ntop(const struct sockaddr *, char *, const size_t);
+size_t rpc_pton(const char *, const size_t,
+ struct sockaddr *, const size_t);
+char * rpc_sockaddr2uaddr(const struct sockaddr *);
+size_t rpc_uaddr2sockaddr(const char *, const size_t,
+ struct sockaddr *, const size_t);
+
+static inline unsigned short rpc_get_port(const struct sockaddr *sap)
+{
+ switch (sap->sa_family) {
+ case AF_INET:
+ return ntohs(((struct sockaddr_in *)sap)->sin_port);
+ case AF_INET6:
+ return ntohs(((struct sockaddr_in6 *)sap)->sin6_port);
+ }
+ return 0;
+}
+
+static inline void rpc_set_port(struct sockaddr *sap,
+ const unsigned short port)
+{
+ switch (sap->sa_family) {
+ case AF_INET:
+ ((struct sockaddr_in *)sap)->sin_port = htons(port);
+ break;
+ case AF_INET6:
+ ((struct sockaddr_in6 *)sap)->sin6_port = htons(port);
+ break;
+ }
+}
+
+#define IPV6_SCOPE_DELIMITER '%'
+#define IPV6_SCOPE_ID_LEN sizeof("%nnnnnnnnnn")
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_CLNT_H */
diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h
index 70df4f1..77e6248 100644
--- a/include/linux/sunrpc/msg_prot.h
+++ b/include/linux/sunrpc/msg_prot.h
@@ -189,7 +189,22 @@
* Additionally, the two alternative forms specified in Section 2.2 of
* [RFC2373] are also acceptable.
*/
-#define RPCBIND_MAXUADDRLEN (56u)
+
+#include <linux/inet.h>
+
+/* Maximum size of the port number part of a universal address */
+#define RPCBIND_MAXUADDRPLEN sizeof(".255.255")
+
+/* Maximum size of an IPv4 universal address */
+#define RPCBIND_MAXUADDR4LEN \
+ (INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
+
+/* Maximum size of an IPv6 universal address */
+#define RPCBIND_MAXUADDR6LEN \
+ (INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
+
+/* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */
+#define RPCBIND_MAXUADDRLEN RPCBIND_MAXUADDR6LEN
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h
index cea764c..cf14db9 100644
--- a/include/linux/sunrpc/rpc_pipe_fs.h
+++ b/include/linux/sunrpc/rpc_pipe_fs.h
@@ -3,6 +3,8 @@
#ifdef __KERNEL__
+#include <linux/workqueue.h>
+
struct rpc_pipe_msg {
struct list_head list;
void *data;
@@ -32,8 +34,8 @@
wait_queue_head_t waitq;
#define RPC_PIPE_WAIT_FOR_OPEN 1
int flags;
- struct rpc_pipe_ops *ops;
struct delayed_work queue_timeout;
+ const struct rpc_pipe_ops *ops;
};
static inline struct rpc_inode *
@@ -44,9 +46,19 @@
extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *);
-extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *);
-extern int rpc_rmdir(struct dentry *);
-extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, struct rpc_pipe_ops *, int flags);
+struct rpc_clnt;
+extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *);
+extern int rpc_remove_client_dir(struct dentry *);
+
+struct cache_detail;
+extern struct dentry *rpc_create_cache_dir(struct dentry *,
+ struct qstr *,
+ mode_t umode,
+ struct cache_detail *);
+extern void rpc_remove_cache_dir(struct dentry *);
+
+extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *,
+ const struct rpc_pipe_ops *, int flags);
extern int rpc_unlink(struct dentry *);
extern struct vfsmount *rpc_get_mount(void);
extern void rpc_put_mount(void);
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index d8910b6..7da466b 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -12,7 +12,6 @@
#include <linux/uio.h>
#include <asm/byteorder.h>
#include <linux/scatterlist.h>
-#include <linux/smp_lock.h>
/*
* Buffer adjustment
@@ -118,17 +117,15 @@
static inline __be32 *
xdr_encode_hyper(__be32 *p, __u64 val)
{
- *p++ = htonl(val >> 32);
- *p++ = htonl(val & 0xFFFFFFFF);
- return p;
+ *(__be64 *)p = cpu_to_be64(val);
+ return p + 2;
}
static inline __be32 *
xdr_decode_hyper(__be32 *p, __u64 *valp)
{
- *valp = ((__u64) ntohl(*p++)) << 32;
- *valp |= ntohl(*p++);
- return p;
+ *valp = be64_to_cpup((__be64 *)p);
+ return p + 2;
}
/*
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 1175d58..c090df4 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -38,10 +38,8 @@
RPC_DISPLAY_ADDR = 0,
RPC_DISPLAY_PORT,
RPC_DISPLAY_PROTO,
- RPC_DISPLAY_ALL,
RPC_DISPLAY_HEX_ADDR,
RPC_DISPLAY_HEX_PORT,
- RPC_DISPLAY_UNIVERSAL_ADDR,
RPC_DISPLAY_NETID,
RPC_DISPLAY_MAX,
};
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index fa4242c..80de700 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -321,6 +321,8 @@
siginfo_t __user *uinfo,
const struct timespec __user *uts,
size_t sigsetsize);
+asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
+ siginfo_t __user *uinfo);
asmlinkage long sys_kill(int pid, int sig);
asmlinkage long sys_tgkill(int tgid, int pid, int sig);
asmlinkage long sys_tkill(int pid, int sig);
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 98a1d8c..99adcdc 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -14,6 +14,8 @@
#ifndef _LINUX_SYSRQ_H
#define _LINUX_SYSRQ_H
+#include <linux/errno.h>
+
struct pt_regs;
struct tty_struct;
diff --git a/include/linux/timer.h b/include/linux/timer.h
index ccf882e..be62ec2 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -190,6 +190,8 @@
*/
#ifdef CONFIG_TIMER_STATS
+extern int timer_stats_active;
+
#define TIMER_STATS_FLAG_DEFERRABLE 0x1
extern void init_timer_stats(void);
@@ -203,6 +205,8 @@
static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
{
+ if (likely(!timer_stats_active))
+ return;
__timer_stats_timer_set_start_info(timer, __builtin_return_address(0));
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1488d8c..e8c6c91 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -394,6 +394,7 @@
extern void disassociate_ctty(int priv);
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
extern void tty_buffer_free_all(struct tty_struct *tty);
extern void tty_buffer_flush(struct tty_struct *tty);
extern void tty_buffer_init(struct tty_struct *tty);
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 40f38d8..0c4ee9b 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -144,7 +144,7 @@
struct tty_ldisc {
struct tty_ldisc_ops *ops;
- int refcount;
+ atomic_t users;
};
#define TTY_LDISC_MAGIC 0x5403
diff --git a/include/linux/uio.h b/include/linux/uio.h
index b7fe138..98c1143 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -19,15 +19,6 @@
__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
};
-#ifdef __KERNEL__
-
-struct kvec {
- void *iov_base; /* and that should *never* hold a userland pointer */
- size_t iov_len;
-};
-
-#endif
-
/*
* UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
*/
@@ -35,6 +26,13 @@
#define UIO_FASTIOV 8
#define UIO_MAXIOV 1024
+#ifdef __KERNEL__
+
+struct kvec {
+ void *iov_base; /* and that should *never* hold a userland pointer */
+ size_t iov_len;
+};
+
/*
* Total number of bytes covered by an iovec.
*
@@ -53,5 +51,6 @@
}
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
#endif
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 84929e9..b1e3c2f 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -888,8 +888,6 @@
* struct usb_device_driver - identifies USB device driver to usbcore
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
- * @nodename: Callback to provide a naming hint for a possible
- * device node to create.
* @probe: Called to see if the driver is willing to manage a particular
* device. If it is, probe returns zero and uses dev_set_drvdata()
* to associate driver-specific data with the device. If unwilling
@@ -924,6 +922,8 @@
/**
* struct usb_class_driver - identifies a USB driver that wants to use the USB major number
* @name: the usb class device name for this driver. Will show up in sysfs.
+ * @nodename: Callback to provide a naming hint for a possible
+ * device node to create.
* @fops: pointer to the struct file_operations of this driver.
* @minor_base: the start of the minor range for this driver.
*
@@ -1046,6 +1046,8 @@
* the device driver is saying that it provided this DMA address,
* which the host controller driver should use in preference to the
* transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
* size for the endpoint, which is a function of the configuration
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
deleted file mode 100644
index e115ae6..0000000
--- a/include/linux/usb/langwell_otg.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H__
-#define __LANGWELL_OTG_H__
-
-/* notify transceiver driver about OTG events */
-extern void langwell_update_transceiver(void);
-/* HCD register bus driver */
-extern int langwell_register_host(struct pci_driver *host_driver);
-/* HCD unregister bus driver */
-extern void langwell_unregister_host(struct pci_driver *host_driver);
-/* DCD register bus driver */
-extern int langwell_register_peripheral(struct pci_driver *client_driver);
-/* DCD unregister bus driver */
-extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
-/* No silent failure, output warning message */
-extern void langwell_otg_nsf_msg(unsigned long message);
-
-#define CI_USBCMD 0x30
-# define USBCMD_RST BIT(1)
-# define USBCMD_RS BIT(0)
-#define CI_USBSTS 0x34
-# define USBSTS_SLI BIT(8)
-# define USBSTS_URI BIT(6)
-# define USBSTS_PCI BIT(2)
-#define CI_PORTSC1 0x74
-# define PORTSC_PP BIT(12)
-# define PORTSC_LS (BIT(11) | BIT(10))
-# define PORTSC_SUSP BIT(7)
-# define PORTSC_CCS BIT(0)
-#define CI_HOSTPC1 0xb4
-# define HOSTPC1_PHCD BIT(22)
-#define CI_OTGSC 0xf4
-# define OTGSC_DPIE BIT(30)
-# define OTGSC_1MSE BIT(29)
-# define OTGSC_BSEIE BIT(28)
-# define OTGSC_BSVIE BIT(27)
-# define OTGSC_ASVIE BIT(26)
-# define OTGSC_AVVIE BIT(25)
-# define OTGSC_IDIE BIT(24)
-# define OTGSC_DPIS BIT(22)
-# define OTGSC_1MSS BIT(21)
-# define OTGSC_BSEIS BIT(20)
-# define OTGSC_BSVIS BIT(19)
-# define OTGSC_ASVIS BIT(18)
-# define OTGSC_AVVIS BIT(17)
-# define OTGSC_IDIS BIT(16)
-# define OTGSC_DPS BIT(14)
-# define OTGSC_1MST BIT(13)
-# define OTGSC_BSE BIT(12)
-# define OTGSC_BSV BIT(11)
-# define OTGSC_ASV BIT(10)
-# define OTGSC_AVV BIT(9)
-# define OTGSC_ID BIT(8)
-# define OTGSC_HABA BIT(7)
-# define OTGSC_HADP BIT(6)
-# define OTGSC_IDPU BIT(5)
-# define OTGSC_DP BIT(4)
-# define OTGSC_OT BIT(3)
-# define OTGSC_HAAR BIT(2)
-# define OTGSC_VC BIT(1)
-# define OTGSC_VD BIT(0)
-# define OTGSC_INTEN_MASK (0x7f << 24)
-# define OTGSC_INTSTS_MASK (0x7f << 16)
-#define CI_USBMODE 0xf8
-# define USBMODE_CM (BIT(1) | BIT(0))
-# define USBMODE_IDLE 0
-# define USBMODE_DEVICE 0x2
-# define USBMODE_HOST 0x3
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-struct otg_hsm {
- /* Input */
- int a_bus_resume;
- int a_bus_suspend;
- int a_conn;
- int a_sess_vld;
- int a_srp_det;
- int a_vbus_vld;
- int b_bus_resume;
- int b_bus_suspend;
- int b_conn;
- int b_se0_srp;
- int b_sess_end;
- int b_sess_vld;
- int id;
-
- /* Internal variables */
- int a_set_b_hnp_en;
- int b_srp_done;
- int b_hnp_enable;
-
- /* Timeout indicator for timers */
- int a_wait_vrise_tmout;
- int a_wait_bcon_tmout;
- int a_aidl_bdis_tmout;
- int b_ase0_brst_tmout;
- int b_bus_suspend_tmout;
- int b_srp_res_tmout;
-
- /* Informative variables */
- int a_bus_drop;
- int a_bus_req;
- int a_clr_err;
- int a_suspend_req;
- int b_bus_req;
-
- /* Output */
- int drv_vbus;
- int loc_conn;
- int loc_sof;
-
- /* Others */
- int b_bus_suspend_vld;
-};
-
-#define TA_WAIT_VRISE 100
-#define TA_WAIT_BCON 30000
-#define TA_AIDL_BDIS 15000
-#define TB_ASE0_BRST 5000
-#define TB_SE0_SRP 2
-#define TB_SRP_RES 100
-#define TB_BUS_SUSPEND 500
-
-struct langwell_otg_timer {
- unsigned long expires; /* Number of count increase to timeout */
- unsigned long count; /* Tick counter */
- void (*function)(unsigned long); /* Timeout function */
- unsigned long data; /* Data passed to function */
- struct list_head list;
-};
-
-struct langwell_otg {
- struct otg_transceiver otg;
- struct otg_hsm hsm;
- void __iomem *regs;
- unsigned region;
- struct pci_driver *host_ops;
- struct pci_driver *client_ops;
- struct pci_dev *pdev;
- struct work_struct work;
- struct workqueue_struct *qwork;
- spinlock_t lock;
- spinlock_t wq_lock;
-};
-
-static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
-{
- return container_of(otg, struct langwell_otg, otg);
-}
-
-#ifdef DEBUG
-#define otg_dbg(fmt, args...) \
- printk(KERN_DEBUG fmt , ## args)
-#else
-#define otg_dbg(fmt, args...) \
- do { } while (0)
-#endif /* DEBUG */
-#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 44801d2..0ec50ba 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -317,7 +317,8 @@
extern void usb_serial_generic_deregister(void);
extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
gfp_t mem_flags);
-extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+extern int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+ struct usb_serial_port *port,
unsigned int ch);
extern int usb_serial_handle_break(struct usb_serial_port *port);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 5d44059..310e18a 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -42,7 +42,6 @@
/* protocol/interface state */
struct net_device *net;
- struct net_device_stats stats;
int msg_enable;
unsigned long data [5];
u32 xid;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 8a025d5..74f1687 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -318,6 +318,8 @@
/* see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */
+
/*
* 10bit raw bayer, expanded to 16 bits
* xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
@@ -336,6 +338,7 @@
/* Vendor-specific formats */
#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index be7d255..8dab9f2 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -20,8 +20,7 @@
#define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */
-struct virtio_blk_config
-{
+struct virtio_blk_config {
/* The capacity (in 512-byte sectors). */
__u64 capacity;
/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
@@ -50,8 +49,7 @@
#define VIRTIO_BLK_T_BARRIER 0x80000000
/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
/* VIRTIO_BLK_T* */
__u32 type;
/* io priority. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 99f5145..e547e3c 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -79,8 +79,7 @@
* the dev->feature bits if it wants.
*/
typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops
-{
+struct virtio_config_ops {
void (*get)(struct virtio_device *vdev, unsigned offset,
void *buf, unsigned len);
void (*set)(struct virtio_device *vdev, unsigned offset,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index cec79ad..d8dd539 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -27,11 +27,11 @@
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
-struct virtio_net_config
-{
+struct virtio_net_config {
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
__u8 mac[6];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
@@ -40,8 +40,7 @@
/* This is the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
+struct virtio_net_hdr {
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
__u8 flags;
#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
@@ -81,14 +80,19 @@
#define VIRTIO_NET_ERR 1
/*
- * Control the RX mode, ie. promisucous and allmulti. PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX 0
#define VIRTIO_NET_CTRL_RX_PROMISC 0
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST 5
/*
* Control the MAC filter table.
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 693e0ec..e4d144b 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -30,8 +30,7 @@
#define VIRTIO_RING_F_INDIRECT_DESC 28
/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
-struct vring_desc
-{
+struct vring_desc {
/* Address (guest-physical). */
__u64 addr;
/* Length. */
@@ -42,24 +41,21 @@
__u16 next;
};
-struct vring_avail
-{
+struct vring_avail {
__u16 flags;
__u16 idx;
__u16 ring[];
};
/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem
-{
+struct vring_used_elem {
/* Index of start of used descriptor chain. */
__u32 id;
/* Total length of the descriptor chain which was used (written to) */
__u32 len;
};
-struct vring_used
-{
+struct vring_used {
__u16 flags;
__u16 idx;
struct vring_used_elem ring[];
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 6788e1a..cf3c2f5 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -77,7 +77,14 @@
#define __WAIT_BIT_KEY_INITIALIZER(word, bit) \
{ .flags = word, .bit_nr = bit, }
-extern void init_waitqueue_head(wait_queue_head_t *q);
+extern void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *);
+
+#define init_waitqueue_head(q) \
+ do { \
+ static struct lock_class_key __key; \
+ \
+ __init_waitqueue_head((q), &__key); \
+ } while (0)
#ifdef CONFIG_LOCKDEP
# define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 4d7e227..94e908c 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -60,6 +60,10 @@
V4L2_IDENT_OV7670 = 250,
V4L2_IDENT_OV7720 = 251,
V4L2_IDENT_OV7725 = 252,
+ V4L2_IDENT_OV7660 = 253,
+ V4L2_IDENT_OV9650 = 254,
+ V4L2_IDENT_OV9655 = 255,
+ V4L2_IDENT_SOI968 = 256,
/* module saa7146: reserved range 300-309 */
V4L2_IDENT_SAA7146 = 300,
@@ -155,9 +159,15 @@
/* module cafe_ccic, just ident 8801 */
V4L2_IDENT_CAFE = 8801,
+ /* module mt9v011, just ident 8243 */
+ V4L2_IDENT_MT9V011 = 8243,
+
/* module tw9910: just ident 9910 */
V4L2_IDENT_TW9910 = 9910,
+ /* module sn9c20x: just ident 10000 */
+ V4L2_IDENT_SN9C20X = 10000,
+
/* module msp3400: reserved range 34000-34999 and 44000-44999 */
V4L2_IDENT_MSPX4XX = 34000, /* generic MSPX4XX identifier, only
use internally (tveeprom.c). */
@@ -234,6 +244,11 @@
V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */
V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */
V4L2_IDENT_MT9T031 = 45020,
+ V4L2_IDENT_MT9V111 = 45031,
+ V4L2_IDENT_MT9V112 = 45032,
+
+ /* HV7131R CMOS sensor: just ident 46000 */
+ V4L2_IDENT_HV7131R = 46000,
/* module cs53132a: just ident 53132 */
V4L2_IDENT_CS53l32A = 53132,
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 8007261..c274993 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -355,7 +355,17 @@
};
int rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
int rfcomm_init_ttys(void);
void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+ return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
#endif /* __RFCOMM_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1a21895..d1892d6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -979,6 +979,10 @@
* channels at a later time. This can be used for devices which do not
* have calibration information gauranteed for frequencies or settings
* outside of its regulatory domain.
+ * @disable_beacon_hints: enable this if your driver needs to ensure that
+ * passive scan flags and beaconing flags may not be lifted by cfg80211
+ * due to regulatory beacon hints. For more information on beacon
+ * hints read the documenation for regulatory_hint_found_beacon()
* @reg_notifier: the driver's regulatory notification callback
* @regd: the driver's regulatory domain, if one was requested via
* the regulatory_hint() API. This can be used by the driver
@@ -1004,6 +1008,7 @@
bool custom_regulatory;
bool strict_regulatory;
+ bool disable_beacon_hints;
enum cfg80211_signal_type signal_type;
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index a632689..cbdd628 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -258,8 +258,8 @@
/* Update TCP window tracking data when NAT mangles the packet */
extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
unsigned int dataoff,
- struct nf_conn *ct,
- int dir);
+ struct nf_conn *ct, int dir,
+ s16 offset);
/* Fake conntrack entry for untracked connections */
extern struct nf_conn nf_conntrack_untracked;
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 5054dc5..29d1267 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -45,6 +45,7 @@
int phonet_address_del(struct net_device *dev, u8 addr);
u8 phonet_address_get(struct net_device *dev, u8 addr);
int phonet_address_lookup(struct net *net, u8 addr);
+void phonet_address_notify(int event, struct net_device *dev, u8 addr);
#define PN_NO_ADDR 0xff
diff --git a/include/net/rose.h b/include/net/rose.h
index cbd5364..5ba9f02 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -156,7 +156,7 @@
extern int sysctl_rose_window_size;
extern int rosecmp(rose_address *, rose_address *);
extern int rosecmpm(rose_address *, rose_address *, unsigned short);
-extern const char *rose2asc(const rose_address *);
+extern char *rose2asc(char *buf, const rose_address *);
extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
extern void rose_kill_by_neigh(struct rose_neigh *);
extern unsigned int rose_new_lci(struct rose_neigh *);
diff --git a/include/net/sock.h b/include/net/sock.h
index 352f06bb..950409d 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -54,6 +54,7 @@
#include <linux/filter.h>
#include <linux/rculist_nulls.h>
+#include <linux/poll.h>
#include <asm/atomic.h>
#include <net/dst.h>
@@ -103,15 +104,15 @@
/**
* struct sock_common - minimal network layer representation of sockets
+ * @skc_node: main hash linkage for various protocol lookup tables
+ * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
+ * @skc_refcnt: reference count
+ * @skc_hash: hash value used with various protocol lookup tables
* @skc_family: network address family
* @skc_state: Connection state
* @skc_reuse: %SO_REUSEADDR setting
* @skc_bound_dev_if: bound device index if != 0
- * @skc_node: main hash linkage for various protocol lookup tables
- * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
* @skc_bind_node: bind hash linkage for various protocol lookup tables
- * @skc_refcnt: reference count
- * @skc_hash: hash value used with various protocol lookup tables
* @skc_prot: protocol handlers inside a network family
* @skc_net: reference to the network namespace of this socket
*
@@ -119,17 +120,21 @@
* for struct sock and struct inet_timewait_sock.
*/
struct sock_common {
- unsigned short skc_family;
- volatile unsigned char skc_state;
- unsigned char skc_reuse;
- int skc_bound_dev_if;
+ /*
+ * first fields are not copied in sock_copy()
+ */
union {
struct hlist_node skc_node;
struct hlist_nulls_node skc_nulls_node;
};
- struct hlist_node skc_bind_node;
atomic_t skc_refcnt;
+
unsigned int skc_hash;
+ unsigned short skc_family;
+ volatile unsigned char skc_state;
+ unsigned char skc_reuse;
+ int skc_bound_dev_if;
+ struct hlist_node skc_bind_node;
struct proto *skc_prot;
#ifdef CONFIG_NET_NS
struct net *skc_net;
@@ -207,15 +212,17 @@
* don't add nothing before this first member (__sk_common) --acme
*/
struct sock_common __sk_common;
+#define sk_node __sk_common.skc_node
+#define sk_nulls_node __sk_common.skc_nulls_node
+#define sk_refcnt __sk_common.skc_refcnt
+
+#define sk_copy_start __sk_common.skc_hash
+#define sk_hash __sk_common.skc_hash
#define sk_family __sk_common.skc_family
#define sk_state __sk_common.skc_state
#define sk_reuse __sk_common.skc_reuse
#define sk_bound_dev_if __sk_common.skc_bound_dev_if
-#define sk_node __sk_common.skc_node
-#define sk_nulls_node __sk_common.skc_nulls_node
#define sk_bind_node __sk_common.skc_bind_node
-#define sk_refcnt __sk_common.skc_refcnt
-#define sk_hash __sk_common.skc_hash
#define sk_prot __sk_common.skc_prot
#define sk_net __sk_common.skc_net
kmemcheck_bitfield_begin(flags);
@@ -1241,6 +1248,74 @@
return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk);
}
+/**
+ * sk_has_sleeper - check if there are any waiting processes
+ * @sk: socket
+ *
+ * Returns true if socket has waiting processes
+ *
+ * The purpose of the sk_has_sleeper and sock_poll_wait is to wrap the memory
+ * barrier call. They were added due to the race found within the tcp code.
+ *
+ * Consider following tcp code paths:
+ *
+ * CPU1 CPU2
+ *
+ * sys_select receive packet
+ * ... ...
+ * __add_wait_queue update tp->rcv_nxt
+ * ... ...
+ * tp->rcv_nxt check sock_def_readable
+ * ... {
+ * schedule ...
+ * if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ * wake_up_interruptible(sk->sk_sleep)
+ * ...
+ * }
+ *
+ * The race for tcp fires when the __add_wait_queue changes done by CPU1 stay
+ * in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1
+ * could then endup calling schedule and sleep forever if there are no more
+ * data on the socket.
+ *
+ * The sk_has_sleeper is always called right after a call to read_lock, so we
+ * can use smp_mb__after_lock barrier.
+ */
+static inline int sk_has_sleeper(struct sock *sk)
+{
+ /*
+ * We need to be sure we are in sync with the
+ * add_wait_queue modifications to the wait queue.
+ *
+ * This memory barrier is paired in the sock_poll_wait.
+ */
+ smp_mb__after_lock();
+ return sk->sk_sleep && waitqueue_active(sk->sk_sleep);
+}
+
+/**
+ * sock_poll_wait - place memory barrier behind the poll_wait call.
+ * @filp: file
+ * @wait_address: socket wait queue
+ * @p: poll_table
+ *
+ * See the comments in the sk_has_sleeper function.
+ */
+static inline void sock_poll_wait(struct file *filp,
+ wait_queue_head_t *wait_address, poll_table *p)
+{
+ if (p && wait_address) {
+ poll_wait(filp, wait_address, p);
+ /*
+ * We need to be sure we are in sync with the
+ * socket flags modification.
+ *
+ * This memory barrier is paired in the sk_has_sleeper.
+ */
+ smp_mb();
+ }
+}
+
/*
* Queue a received datagram if it will fit. Stream and sequenced
* protocols can't normally use this as they need to fit buffers in
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 19f4150..88af843 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1425,6 +1425,11 @@
#ifdef CONFIG_TCP_MD5SIG
struct tcp_md5sig_key *(*md5_lookup) (struct sock *sk,
struct request_sock *req);
+ int (*calc_md5_hash) (char *location,
+ struct tcp_md5sig_key *md5,
+ struct sock *sk,
+ struct request_sock *req,
+ struct sk_buff *skb);
#endif
};
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index d6b05f4..9a74b46 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -1,3 +1,6 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM block
+
#if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_BLOCK_H
@@ -5,9 +8,6 @@
#include <linux/blkdev.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM block
-
TRACE_EVENT(block_rq_abort,
TP_PROTO(struct request_queue *q, struct request *rq),
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index acf4cc9..7d8b5bc 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -1,9 +1,9 @@
-#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EXT4_H
-
#undef TRACE_SYSTEM
#define TRACE_SYSTEM ext4
+#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT4_H
+
#include <linux/writeback.h>
#include "../../../fs/ext4/ext4.h"
#include "../../../fs/ext4/mballoc.h"
@@ -34,7 +34,8 @@
TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu",
jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->mode,
- __entry->uid, __entry->gid, __entry->blocks)
+ __entry->uid, __entry->gid,
+ (unsigned long long) __entry->blocks)
);
TRACE_EVENT(ext4_request_inode,
@@ -189,7 +190,7 @@
__entry->copied)
);
-TRACE_EVENT(ext4_da_writepage,
+TRACE_EVENT(ext4_writepage,
TP_PROTO(struct inode *inode, struct page *page),
TP_ARGS(inode, page),
@@ -341,49 +342,6 @@
__entry->copied)
);
-TRACE_EVENT(ext4_normal_writepage,
- TP_PROTO(struct inode *inode, struct page *page),
-
- TP_ARGS(inode, page),
-
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( pgoff_t, index )
- ),
-
- TP_fast_assign(
- __entry->dev = inode->i_sb->s_dev;
- __entry->ino = inode->i_ino;
- __entry->index = page->index;
- ),
-
- TP_printk("dev %s ino %lu page_index %lu",
- jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
-TRACE_EVENT(ext4_journalled_writepage,
- TP_PROTO(struct inode *inode, struct page *page),
-
- TP_ARGS(inode, page),
-
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( pgoff_t, index )
-
- ),
-
- TP_fast_assign(
- __entry->dev = inode->i_sb->s_dev;
- __entry->ino = inode->i_ino;
- __entry->index = page->index;
- ),
-
- TP_printk("dev %s ino %lu page_index %lu",
- jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
TRACE_EVENT(ext4_discard_blocks,
TP_PROTO(struct super_block *sb, unsigned long long blk,
unsigned long long count),
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index b0c7ede..1cb0c3a 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
#if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_IRQ_H
#include <linux/tracepoint.h>
#include <linux/interrupt.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM irq
-
#define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
#define show_softirq_name(val) \
__print_symbolic(val, \
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index 845b0b4..10813fa 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
#if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_JBD2_H
#include <linux/jbd2.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM jbd2
-
TRACE_EVENT(jbd2_checkpoint,
TP_PROTO(journal_t *journal, int result),
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index 9baba50..1493c54 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
#if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_KMEM_H
#include <linux/types.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM kmem
-
/*
* The order of these masks is important. Matching masks will be seen
* first and the left over flags will end up showing by themselves.
diff --git a/include/trace/events/lockdep.h b/include/trace/events/lockdep.h
index 0e956c9..bcf1d20 100644
--- a/include/trace/events/lockdep.h
+++ b/include/trace/events/lockdep.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lockdep
+
#if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_LOCKDEP_H
#include <linux/lockdep.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lockdep
-
#ifdef CONFIG_LOCKDEP
TRACE_EVENT(lock_acquire,
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 24ab5bc..8949bb7 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sched
+
#if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_SCHED_H
#include <linux/sched.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM sched
-
/*
* Tracepoint for calling kthread_stop, performed to end a kthread:
*/
diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h
index 1e8fabb..e499863b 100644
--- a/include/trace/events/skb.h
+++ b/include/trace/events/skb.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
#if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_SKB_H
#include <linux/skbuff.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM skb
-
/*
* Tracepoint for free an sk_buff:
*/
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index 035f1bf..fcfd9a1 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -1,3 +1,6 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM workqueue
+
#if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_WORKQUEUE_H
@@ -5,9 +8,6 @@
#include <linux/sched.h>
#include <linux/tracepoint.h>
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM workqueue
-
TRACE_EVENT(workqueue_insertion,
TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 1867553..f64fbaa 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -144,6 +144,9 @@
#undef TP_fast_assign
#define TP_fast_assign(args...) args
+#undef TP_perf_assign
+#define TP_perf_assign(args...)
+
#undef TRACE_EVENT
#define TRACE_EVENT(call, proto, args, tstruct, func, print) \
static int \
@@ -345,6 +348,56 @@
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+#ifdef CONFIG_EVENT_PROFILE
+
+/*
+ * Generate the functions needed for tracepoint perf_counter support.
+ *
+ * NOTE: The insertion profile callback (ftrace_profile_<call>) is defined later
+ *
+ * static int ftrace_profile_enable_<call>(struct ftrace_event_call *event_call)
+ * {
+ * int ret = 0;
+ *
+ * if (!atomic_inc_return(&event_call->profile_count))
+ * ret = register_trace_<call>(ftrace_profile_<call>);
+ *
+ * return ret;
+ * }
+ *
+ * static void ftrace_profile_disable_<call>(struct ftrace_event_call *event_call)
+ * {
+ * if (atomic_add_negative(-1, &event->call->profile_count))
+ * unregister_trace_<call>(ftrace_profile_<call>);
+ * }
+ *
+ */
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+ \
+static void ftrace_profile_##call(proto); \
+ \
+static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
+{ \
+ int ret = 0; \
+ \
+ if (!atomic_inc_return(&event_call->profile_count)) \
+ ret = register_trace_##call(ftrace_profile_##call); \
+ \
+ return ret; \
+} \
+ \
+static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
+{ \
+ if (atomic_add_negative(-1, &event_call->profile_count)) \
+ unregister_trace_##call(ftrace_profile_##call); \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#endif
+
/*
* Stage 4 of the trace events.
*
@@ -447,28 +500,6 @@
#define TP_FMT(fmt, args...) fmt "\n", ##args
#ifdef CONFIG_EVENT_PROFILE
-#define _TRACE_PROFILE(call, proto, args) \
-static void ftrace_profile_##call(proto) \
-{ \
- extern void perf_tpcounter_event(int); \
- perf_tpcounter_event(event_##call.id); \
-} \
- \
-static int ftrace_profile_enable_##call(struct ftrace_event_call *event_call) \
-{ \
- int ret = 0; \
- \
- if (!atomic_inc_return(&event_call->profile_count)) \
- ret = register_trace_##call(ftrace_profile_##call); \
- \
- return ret; \
-} \
- \
-static void ftrace_profile_disable_##call(struct ftrace_event_call *event_call)\
-{ \
- if (atomic_add_negative(-1, &event_call->profile_count)) \
- unregister_trace_##call(ftrace_profile_##call); \
-}
#define _TRACE_PROFILE_INIT(call) \
.profile_count = ATOMIC_INIT(-1), \
@@ -476,7 +507,6 @@
.profile_disable = ftrace_profile_disable_##call,
#else
-#define _TRACE_PROFILE(call, proto, args)
#define _TRACE_PROFILE_INIT(call)
#endif
@@ -502,7 +532,6 @@
#undef TRACE_EVENT
#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
-_TRACE_PROFILE(call, PARAMS(proto), PARAMS(args)) \
\
static struct ftrace_event_call event_##call; \
\
@@ -586,6 +615,110 @@
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
-#undef _TRACE_PROFILE
+/*
+ * Define the insertion callback to profile events
+ *
+ * The job is very similar to ftrace_raw_event_<call> except that we don't
+ * insert in the ring buffer but in a perf counter.
+ *
+ * static void ftrace_profile_<call>(proto)
+ * {
+ * struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
+ * struct ftrace_event_call *event_call = &event_<call>;
+ * extern void perf_tpcounter_event(int, u64, u64, void *, int);
+ * struct ftrace_raw_##call *entry;
+ * u64 __addr = 0, __count = 1;
+ * unsigned long irq_flags;
+ * int __entry_size;
+ * int __data_size;
+ * int pc;
+ *
+ * local_save_flags(irq_flags);
+ * pc = preempt_count();
+ *
+ * __data_size = ftrace_get_offsets_<call>(&__data_offsets, args);
+ *
+ * // Below we want to get the aligned size by taking into account
+ * // the u32 field that will later store the buffer size
+ * __entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),
+ * sizeof(u64));
+ * __entry_size -= sizeof(u32);
+ *
+ * do {
+ * char raw_data[__entry_size]; <- allocate our sample in the stack
+ * struct trace_entry *ent;
+ *
+ * zero dead bytes from alignment to avoid stack leak to userspace:
+ *
+ * *(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;
+ * entry = (struct ftrace_raw_<call> *)raw_data;
+ * ent = &entry->ent;
+ * tracing_generic_entry_update(ent, irq_flags, pc);
+ * ent->type = event_call->id;
+ *
+ * <tstruct> <- do some jobs with dynamic arrays
+ *
+ * <assign> <- affect our values
+ *
+ * perf_tpcounter_event(event_call->id, __addr, __count, entry,
+ * __entry_size); <- submit them to perf counter
+ * } while (0);
+ *
+ * }
+ */
+
+#ifdef CONFIG_EVENT_PROFILE
+
+#undef __perf_addr
+#define __perf_addr(a) __addr = (a)
+
+#undef __perf_count
+#define __perf_count(c) __count = (c)
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(call, proto, args, tstruct, assign, print) \
+static void ftrace_profile_##call(proto) \
+{ \
+ struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
+ struct ftrace_event_call *event_call = &event_##call; \
+ extern void perf_tpcounter_event(int, u64, u64, void *, int); \
+ struct ftrace_raw_##call *entry; \
+ u64 __addr = 0, __count = 1; \
+ unsigned long irq_flags; \
+ int __entry_size; \
+ int __data_size; \
+ int pc; \
+ \
+ local_save_flags(irq_flags); \
+ pc = preempt_count(); \
+ \
+ __data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
+ __entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),\
+ sizeof(u64)); \
+ __entry_size -= sizeof(u32); \
+ \
+ do { \
+ char raw_data[__entry_size]; \
+ struct trace_entry *ent; \
+ \
+ *(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL; \
+ entry = (struct ftrace_raw_##call *)raw_data; \
+ ent = &entry->ent; \
+ tracing_generic_entry_update(ent, irq_flags, pc); \
+ ent->type = event_call->id; \
+ \
+ tstruct \
+ \
+ { assign; } \
+ \
+ perf_tpcounter_event(event_call->id, __addr, __count, entry,\
+ __entry_size); \
+ } while (0); \
+ \
+}
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+#endif /* CONFIG_EVENT_PROFILE */
+
#undef _TRACE_PROFILE_INIT
diff --git a/init/Kconfig b/init/Kconfig
index 1ce05a4..3f7e609 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -940,6 +940,7 @@
config PERF_COUNTERS
bool "Kernel Performance Counters"
+ default y if PROFILING
depends on HAVE_PERF_COUNTERS
select ANON_INODES
help
@@ -961,9 +962,17 @@
Say Y if unsure.
config EVENT_PROFILE
- bool "Tracepoint profile sources"
- depends on PERF_COUNTERS && EVENT_TRACER
+ bool "Tracepoint profiling sources"
+ depends on PERF_COUNTERS && EVENT_TRACING
default y
+ help
+ Allow the use of tracepoints as software performance counters.
+
+ When this is enabled, you can create perf counters based on
+ tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID
+ found in debugfs://tracing/events/*/*/id. (The -e/--events
+ option to the perf tool can parse and interpret symbolic
+ tracepoints, in the subsystem:tracepoint_name format.)
endmenu
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index e35ba2c..c5e68ad 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -32,6 +32,7 @@
#include <linux/nsproxy.h>
#include <linux/pid.h>
#include <linux/ipc_namespace.h>
+#include <linux/ima.h>
#include <net/sock.h>
#include "util.h"
@@ -733,6 +734,7 @@
error = PTR_ERR(filp);
goto out_putfd;
}
+ ima_counts_get(filp);
fd_install(fd, filp);
goto out_upsem;
diff --git a/kernel/Makefile b/kernel/Makefile
index 780c8dc..2093a69 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -96,6 +96,7 @@
obj-$(CONFIG_FUNCTION_TRACER) += trace/
obj-$(CONFIG_TRACING) += trace/
obj-$(CONFIG_X86_DS) += trace/
+obj-$(CONFIG_RING_BUFFER) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_SLOW_WORK) += slow-work.o
obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
diff --git a/kernel/acct.c b/kernel/acct.c
index 7afa315..9f33910 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -215,6 +215,7 @@
static int acct_on(char *name)
{
struct file *file;
+ struct vfsmount *mnt;
int error;
struct pid_namespace *ns;
struct bsd_acct_struct *acct = NULL;
@@ -256,11 +257,12 @@
acct = NULL;
}
- mnt_pin(file->f_path.mnt);
+ mnt = file->f_path.mnt;
+ mnt_pin(mnt);
acct_file_reopen(ns->bacct, file, ns);
spin_unlock(&acct_lock);
- mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
+ mntput(mnt); /* it's pinned, now give up active reference */
kfree(acct);
return 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3737a68..b6eadfe 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -47,6 +47,7 @@
#include <linux/hash.h>
#include <linux/namei.h>
#include <linux/smp_lock.h>
+#include <linux/pid_namespace.h>
#include <asm/atomic.h>
@@ -734,16 +735,28 @@
* reference to css->refcnt. In general, this refcnt is expected to goes down
* to zero, soon.
*
- * CGRP_WAIT_ON_RMDIR flag is modified under cgroup's inode->i_mutex;
+ * CGRP_WAIT_ON_RMDIR flag is set under cgroup's inode->i_mutex;
*/
DECLARE_WAIT_QUEUE_HEAD(cgroup_rmdir_waitq);
-static void cgroup_wakeup_rmdir_waiters(const struct cgroup *cgrp)
+static void cgroup_wakeup_rmdir_waiter(struct cgroup *cgrp)
{
- if (unlikely(test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
+ if (unlikely(test_and_clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
wake_up_all(&cgroup_rmdir_waitq);
}
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css)
+{
+ css_get(css);
+}
+
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css)
+{
+ cgroup_wakeup_rmdir_waiter(css->cgroup);
+ css_put(css);
+}
+
+
static int rebind_subsystems(struct cgroupfs_root *root,
unsigned long final_bits)
{
@@ -960,6 +973,7 @@
INIT_LIST_HEAD(&cgrp->children);
INIT_LIST_HEAD(&cgrp->css_sets);
INIT_LIST_HEAD(&cgrp->release_list);
+ INIT_LIST_HEAD(&cgrp->pids_list);
init_rwsem(&cgrp->pids_mutex);
}
static void init_cgroup_root(struct cgroupfs_root *root)
@@ -1357,7 +1371,7 @@
* wake up rmdir() waiter. the rmdir should fail since the cgroup
* is no longer empty.
*/
- cgroup_wakeup_rmdir_waiters(cgrp);
+ cgroup_wakeup_rmdir_waiter(cgrp);
return 0;
}
@@ -2201,12 +2215,30 @@
return ret;
}
+/*
+ * Cache pids for all threads in the same pid namespace that are
+ * opening the same "tasks" file.
+ */
+struct cgroup_pids {
+ /* The node in cgrp->pids_list */
+ struct list_head list;
+ /* The cgroup those pids belong to */
+ struct cgroup *cgrp;
+ /* The namepsace those pids belong to */
+ struct pid_namespace *ns;
+ /* Array of process ids in the cgroup */
+ pid_t *tasks_pids;
+ /* How many files are using the this tasks_pids array */
+ int use_count;
+ /* Length of the current tasks_pids array */
+ int length;
+};
+
static int cmppid(const void *a, const void *b)
{
return *(pid_t *)a - *(pid_t *)b;
}
-
/*
* seq_file methods for the "tasks" file. The seq_file position is the
* next pid to display; the seq_file iterator is a pointer to the pid
@@ -2221,45 +2253,47 @@
* after a seek to the start). Use a binary-search to find the
* next pid to display, if any
*/
- struct cgroup *cgrp = s->private;
+ struct cgroup_pids *cp = s->private;
+ struct cgroup *cgrp = cp->cgrp;
int index = 0, pid = *pos;
int *iter;
down_read(&cgrp->pids_mutex);
if (pid) {
- int end = cgrp->pids_length;
+ int end = cp->length;
while (index < end) {
int mid = (index + end) / 2;
- if (cgrp->tasks_pids[mid] == pid) {
+ if (cp->tasks_pids[mid] == pid) {
index = mid;
break;
- } else if (cgrp->tasks_pids[mid] <= pid)
+ } else if (cp->tasks_pids[mid] <= pid)
index = mid + 1;
else
end = mid;
}
}
/* If we're off the end of the array, we're done */
- if (index >= cgrp->pids_length)
+ if (index >= cp->length)
return NULL;
/* Update the abstract position to be the actual pid that we found */
- iter = cgrp->tasks_pids + index;
+ iter = cp->tasks_pids + index;
*pos = *iter;
return iter;
}
static void cgroup_tasks_stop(struct seq_file *s, void *v)
{
- struct cgroup *cgrp = s->private;
+ struct cgroup_pids *cp = s->private;
+ struct cgroup *cgrp = cp->cgrp;
up_read(&cgrp->pids_mutex);
}
static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct cgroup *cgrp = s->private;
+ struct cgroup_pids *cp = s->private;
int *p = v;
- int *end = cgrp->tasks_pids + cgrp->pids_length;
+ int *end = cp->tasks_pids + cp->length;
/*
* Advance to the next pid in the array. If this goes off the
@@ -2286,26 +2320,33 @@
.show = cgroup_tasks_show,
};
-static void release_cgroup_pid_array(struct cgroup *cgrp)
+static void release_cgroup_pid_array(struct cgroup_pids *cp)
{
+ struct cgroup *cgrp = cp->cgrp;
+
down_write(&cgrp->pids_mutex);
- BUG_ON(!cgrp->pids_use_count);
- if (!--cgrp->pids_use_count) {
- kfree(cgrp->tasks_pids);
- cgrp->tasks_pids = NULL;
- cgrp->pids_length = 0;
+ BUG_ON(!cp->use_count);
+ if (!--cp->use_count) {
+ list_del(&cp->list);
+ put_pid_ns(cp->ns);
+ kfree(cp->tasks_pids);
+ kfree(cp);
}
up_write(&cgrp->pids_mutex);
}
static int cgroup_tasks_release(struct inode *inode, struct file *file)
{
- struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+ struct seq_file *seq;
+ struct cgroup_pids *cp;
if (!(file->f_mode & FMODE_READ))
return 0;
- release_cgroup_pid_array(cgrp);
+ seq = file->private_data;
+ cp = seq->private;
+
+ release_cgroup_pid_array(cp);
return seq_release(inode, file);
}
@@ -2324,6 +2365,8 @@
static int cgroup_tasks_open(struct inode *unused, struct file *file)
{
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+ struct pid_namespace *ns = current->nsproxy->pid_ns;
+ struct cgroup_pids *cp;
pid_t *pidarray;
int npids;
int retval;
@@ -2350,20 +2393,37 @@
* array if necessary
*/
down_write(&cgrp->pids_mutex);
- kfree(cgrp->tasks_pids);
- cgrp->tasks_pids = pidarray;
- cgrp->pids_length = npids;
- cgrp->pids_use_count++;
+
+ list_for_each_entry(cp, &cgrp->pids_list, list) {
+ if (ns == cp->ns)
+ goto found;
+ }
+
+ cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+ if (!cp) {
+ up_write(&cgrp->pids_mutex);
+ kfree(pidarray);
+ return -ENOMEM;
+ }
+ cp->cgrp = cgrp;
+ cp->ns = ns;
+ get_pid_ns(ns);
+ list_add(&cp->list, &cgrp->pids_list);
+found:
+ kfree(cp->tasks_pids);
+ cp->tasks_pids = pidarray;
+ cp->length = npids;
+ cp->use_count++;
up_write(&cgrp->pids_mutex);
file->f_op = &cgroup_tasks_operations;
retval = seq_open(file, &cgroup_tasks_seq_operations);
if (retval) {
- release_cgroup_pid_array(cgrp);
+ release_cgroup_pid_array(cp);
return retval;
}
- ((struct seq_file *)file->private_data)->private = cgrp;
+ ((struct seq_file *)file->private_data)->private = cp;
return 0;
}
@@ -2696,33 +2756,42 @@
mutex_unlock(&cgroup_mutex);
/*
+ * In general, subsystem has no css->refcnt after pre_destroy(). But
+ * in racy cases, subsystem may have to get css->refcnt after
+ * pre_destroy() and it makes rmdir return with -EBUSY. This sometimes
+ * make rmdir return -EBUSY too often. To avoid that, we use waitqueue
+ * for cgroup's rmdir. CGRP_WAIT_ON_RMDIR is for synchronizing rmdir
+ * and subsystem's reference count handling. Please see css_get/put
+ * and css_tryget() and cgroup_wakeup_rmdir_waiter() implementation.
+ */
+ set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
+
+ /*
* Call pre_destroy handlers of subsys. Notify subsystems
* that rmdir() request comes.
*/
ret = cgroup_call_pre_destroy(cgrp);
- if (ret)
+ if (ret) {
+ clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
return ret;
+ }
mutex_lock(&cgroup_mutex);
parent = cgrp->parent;
if (atomic_read(&cgrp->count) || !list_empty(&cgrp->children)) {
+ clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
mutex_unlock(&cgroup_mutex);
return -EBUSY;
}
- /*
- * css_put/get is provided for subsys to grab refcnt to css. In typical
- * case, subsystem has no reference after pre_destroy(). But, under
- * hierarchy management, some *temporal* refcnt can be hold.
- * To avoid returning -EBUSY to a user, waitqueue is used. If subsys
- * is really busy, it should return -EBUSY at pre_destroy(). wake_up
- * is called when css_put() is called and refcnt goes down to 0.
- */
- set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
prepare_to_wait(&cgroup_rmdir_waitq, &wait, TASK_INTERRUPTIBLE);
-
if (!cgroup_clear_css_refs(cgrp)) {
mutex_unlock(&cgroup_mutex);
- schedule();
+ /*
+ * Because someone may call cgroup_wakeup_rmdir_waiter() before
+ * prepare_to_wait(), we need to check this flag.
+ */
+ if (test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))
+ schedule();
finish_wait(&cgroup_rmdir_waitq, &wait);
clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
if (signal_pending(current))
@@ -3294,7 +3363,7 @@
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
- cgroup_wakeup_rmdir_waiters(cgrp);
+ cgroup_wakeup_rmdir_waiter(cgrp);
}
rcu_read_unlock();
}
diff --git a/kernel/exit.c b/kernel/exit.c
index 628d41f..869dc22 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -12,7 +12,6 @@
#include <linux/completion.h>
#include <linux/personality.h>
#include <linux/tty.h>
-#include <linux/mnt_namespace.h>
#include <linux/iocontext.h>
#include <linux/key.h>
#include <linux/security.h>
diff --git a/kernel/fork.c b/kernel/fork.c
index 467746b..021e113 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/completion.h>
-#include <linux/mnt_namespace.h>
#include <linux/personality.h>
#include <linux/mempolicy.h>
#include <linux/sem.h>
@@ -427,6 +426,7 @@
init_rwsem(&mm->mmap_sem);
INIT_LIST_HEAD(&mm->mmlist);
mm->flags = (current->mm) ? current->mm->flags : default_dump_filter;
+ mm->oom_adj = (current->mm) ? current->mm->oom_adj : 0;
mm->core_state = NULL;
mm->nr_ptes = 0;
set_mm_counter(mm, file_rss, 0);
@@ -568,18 +568,18 @@
* the value intact in a core dump, and to save the unnecessary
* trouble otherwise. Userland only wants this done for a sys_exit.
*/
- if (tsk->clear_child_tid
- && !(tsk->flags & PF_SIGNALED)
- && atomic_read(&mm->mm_users) > 1) {
- u32 __user * tidptr = tsk->clear_child_tid;
+ if (tsk->clear_child_tid) {
+ if (!(tsk->flags & PF_SIGNALED) &&
+ atomic_read(&mm->mm_users) > 1) {
+ /*
+ * We don't check the error code - if userspace has
+ * not set up a proper pointer then tough luck.
+ */
+ put_user(0, tsk->clear_child_tid);
+ sys_futex(tsk->clear_child_tid, FUTEX_WAKE,
+ 1, NULL, NULL, 0);
+ }
tsk->clear_child_tid = NULL;
-
- /*
- * We don't check the error code - if userspace has
- * not set up a proper pointer then tough luck.
- */
- put_user(0, tidptr);
- sys_futex(tidptr, FUTEX_WAKE, 1, NULL, NULL, 0);
}
}
@@ -1269,6 +1269,7 @@
write_unlock_irq(&tasklist_lock);
proc_fork_connector(p);
cgroup_post_fork(p);
+ perf_counter_fork(p);
return p;
bad_fork_free_pid:
@@ -1408,12 +1409,6 @@
if (clone_flags & CLONE_VFORK) {
p->vfork_done = &vfork;
init_completion(&vfork);
- } else if (!(clone_flags & CLONE_VM)) {
- /*
- * vfork will do an exec which will call
- * set_task_comm()
- */
- perf_counter_fork(p);
}
audit_finish_fork(p);
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 2f4936c..bd1d42b 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -44,12 +44,19 @@
recalc_sigpending(); /* We sent fake signal, clean it up */
spin_unlock_irq(¤t->sighand->siglock);
+ /* prevent accounting of that task to load */
+ current->flags |= PF_FREEZING;
+
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (!frozen(current))
break;
schedule();
}
+
+ /* Remove the accounting blocker */
+ current->flags &= ~PF_FREEZING;
+
pr_debug("%s left refrigerator\n", current->comm);
__set_current_state(save);
}
diff --git a/kernel/futex.c b/kernel/futex.c
index 1c33711..e18cfbd 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -247,6 +247,7 @@
if (err < 0)
return err;
+ page = compound_head(page);
lock_page(page);
if (!page->mapping) {
unlock_page(page);
@@ -299,7 +300,7 @@
static int fault_in_user_writeable(u32 __user *uaddr)
{
int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
- sizeof(*uaddr), 1, 0, NULL, NULL);
+ 1, 1, 0, NULL, NULL);
return ret < 0 ? ret : 0;
}
@@ -1009,15 +1010,19 @@
* requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
* q: the futex_q
* key: the key of the requeue target futex
+ * hb: the hash_bucket of the requeue target futex
*
* During futex_requeue, with requeue_pi=1, it is possible to acquire the
* target futex if it is uncontended or via a lock steal. Set the futex_q key
* to the requeue target futex so the waiter can detect the wakeup on the right
* futex, but remove it from the hb and NULL the rt_waiter so it can detect
- * atomic lock acquisition. Must be called with the q->lock_ptr held.
+ * atomic lock acquisition. Set the q->lock_ptr to the requeue target hb->lock
+ * to protect access to the pi_state to fixup the owner later. Must be called
+ * with both q->lock_ptr and hb->lock held.
*/
static inline
-void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key)
+void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
+ struct futex_hash_bucket *hb)
{
drop_futex_key_refs(&q->key);
get_futex_key_refs(key);
@@ -1029,6 +1034,11 @@
WARN_ON(!q->rt_waiter);
q->rt_waiter = NULL;
+ q->lock_ptr = &hb->lock;
+#ifdef CONFIG_DEBUG_PI_LIST
+ q->list.plist.lock = &hb->lock;
+#endif
+
wake_up_state(q->task, TASK_NORMAL);
}
@@ -1087,7 +1097,7 @@
ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task,
set_waiters);
if (ret == 1)
- requeue_pi_wake_futex(top_waiter, key2);
+ requeue_pi_wake_futex(top_waiter, key2, hb2);
return ret;
}
@@ -1246,8 +1256,15 @@
if (!match_futex(&this->key, &key1))
continue;
- WARN_ON(!requeue_pi && this->rt_waiter);
- WARN_ON(requeue_pi && !this->rt_waiter);
+ /*
+ * FUTEX_WAIT_REQEUE_PI and FUTEX_CMP_REQUEUE_PI should always
+ * be paired with each other and no other futex ops.
+ */
+ if ((requeue_pi && !this->rt_waiter) ||
+ (!requeue_pi && this->rt_waiter)) {
+ ret = -EINVAL;
+ break;
+ }
/*
* Wake nr_wake waiters. For requeue_pi, if we acquired the
@@ -1272,7 +1289,7 @@
this->task, 1);
if (ret == 1) {
/* We got the lock. */
- requeue_pi_wake_futex(this, &key2);
+ requeue_pi_wake_futex(this, &key2, hb2);
continue;
} else if (ret) {
/* -EDEADLK */
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index d607a5b..2357165 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -180,7 +180,8 @@
int cmd = op & FUTEX_CMD_MASK;
if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI ||
- cmd == FUTEX_WAIT_BITSET)) {
+ cmd == FUTEX_WAIT_BITSET ||
+ cmd == FUTEX_WAIT_REQUEUE_PI)) {
if (get_compat_timespec(&ts, utime))
return -EFAULT;
if (!timespec_valid(&ts))
@@ -191,7 +192,8 @@
t = ktime_add_safe(ktime_get(), t);
tp = &t;
}
- if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE)
+ if (cmd == FUTEX_REQUEUE || cmd == FUTEX_CMP_REQUEUE ||
+ cmd == FUTEX_CMP_REQUEUE_PI || cmd == FUTEX_WAKE_OP)
val2 = (int) (unsigned long) utime;
return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 9002958..49da79a 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -191,6 +191,46 @@
}
}
+
+/*
+ * Get the preferred target CPU for NOHZ
+ */
+static int hrtimer_get_target(int this_cpu, int pinned)
+{
+#ifdef CONFIG_NO_HZ
+ if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
+ int preferred_cpu = get_nohz_load_balancer();
+
+ if (preferred_cpu >= 0)
+ return preferred_cpu;
+ }
+#endif
+ return this_cpu;
+}
+
+/*
+ * With HIGHRES=y we do not migrate the timer when it is expiring
+ * before the next event on the target cpu because we cannot reprogram
+ * the target cpu hardware and we would cause it to fire late.
+ *
+ * Called with cpu_base->lock of target cpu held.
+ */
+static int
+hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
+{
+#ifdef CONFIG_HIGH_RES_TIMERS
+ ktime_t expires;
+
+ if (!new_base->cpu_base->hres_active)
+ return 0;
+
+ expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
+ return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
+#else
+ return 0;
+#endif
+}
+
/*
* Switch the timer base to the current CPU when possible.
*/
@@ -200,16 +240,8 @@
{
struct hrtimer_clock_base *new_base;
struct hrtimer_cpu_base *new_cpu_base;
- int cpu, preferred_cpu = -1;
-
- cpu = smp_processor_id();
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
- if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
- preferred_cpu = get_nohz_load_balancer();
- if (preferred_cpu >= 0)
- cpu = preferred_cpu;
- }
-#endif
+ int this_cpu = smp_processor_id();
+ int cpu = hrtimer_get_target(this_cpu, pinned);
again:
new_cpu_base = &per_cpu(hrtimer_bases, cpu);
@@ -217,7 +249,7 @@
if (base != new_base) {
/*
- * We are trying to schedule the timer on the local CPU.
+ * We are trying to move timer to new_base.
* However we can't change timer's base while it is running,
* so we keep it on the same CPU. No hassle vs. reprogramming
* the event source in the high resolution case. The softirq
@@ -233,38 +265,12 @@
spin_unlock(&base->cpu_base->lock);
spin_lock(&new_base->cpu_base->lock);
- /* Optimized away for NOHZ=n SMP=n */
- if (cpu == preferred_cpu) {
- /* Calculate clock monotonic expiry time */
-#ifdef CONFIG_HIGH_RES_TIMERS
- ktime_t expires = ktime_sub(hrtimer_get_expires(timer),
- new_base->offset);
-#else
- ktime_t expires = hrtimer_get_expires(timer);
-#endif
-
- /*
- * Get the next event on target cpu from the
- * clock events layer.
- * This covers the highres=off nohz=on case as well.
- */
- ktime_t next = clockevents_get_next_event(cpu);
-
- ktime_t delta = ktime_sub(expires, next);
-
- /*
- * We do not migrate the timer when it is expiring
- * before the next event on the target cpu because
- * we cannot reprogram the target cpu hardware and
- * we would cause it to fire late.
- */
- if (delta.tv64 < 0) {
- cpu = smp_processor_id();
- spin_unlock(&new_base->cpu_base->lock);
- spin_lock(&base->cpu_base->lock);
- timer->base = base;
- goto again;
- }
+ if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
+ cpu = this_cpu;
+ spin_unlock(&new_base->cpu_base->lock);
+ spin_lock(&base->cpu_base->lock);
+ timer->base = base;
+ goto again;
}
timer->base = new_base;
}
@@ -1276,14 +1282,22 @@
expires_next.tv64 = KTIME_MAX;
+ spin_lock(&cpu_base->lock);
+ /*
+ * We set expires_next to KTIME_MAX here with cpu_base->lock
+ * held to prevent that a timer is enqueued in our queue via
+ * the migration code. This does not affect enqueueing of
+ * timers which run their callback and need to be requeued on
+ * this CPU.
+ */
+ cpu_base->expires_next.tv64 = KTIME_MAX;
+
base = cpu_base->clock_base;
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
ktime_t basenow;
struct rb_node *node;
- spin_lock(&cpu_base->lock);
-
basenow = ktime_add(now, base->offset);
while ((node = base->first)) {
@@ -1316,11 +1330,15 @@
__run_hrtimer(timer);
}
- spin_unlock(&cpu_base->lock);
base++;
}
+ /*
+ * Store the new expiry value so the migration code can verify
+ * against it.
+ */
cpu_base->expires_next = expires_next;
+ spin_unlock(&cpu_base->lock);
/* Reprogramming necessary ? */
if (expires_next.tv64 != KTIME_MAX) {
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 7346825..e70ed55 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -42,8 +42,7 @@
extern int irq_select_affinity_usr(unsigned int irq);
-extern void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+extern void irq_set_thread_affinity(struct irq_desc *desc);
/*
* Debugging printout:
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 50da676..d222515 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -80,14 +80,22 @@
return 1;
}
-void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
+/**
+ * irq_set_thread_affinity - Notify irq threads to adjust affinity
+ * @desc: irq descriptor which has affitnity changed
+ *
+ * We just set IRQTF_AFFINITY and delegate the affinity setting
+ * to the interrupt thread itself. We can not call
+ * set_cpus_allowed_ptr() here as we hold desc->lock and this
+ * code can be called from hard interrupt context.
+ */
+void irq_set_thread_affinity(struct irq_desc *desc)
{
struct irqaction *action = desc->action;
while (action) {
if (action->thread)
- set_cpus_allowed_ptr(action->thread, cpumask);
+ set_bit(IRQTF_AFFINITY, &action->thread_flags);
action = action->next;
}
}
@@ -112,7 +120,7 @@
if (desc->status & IRQ_MOVE_PCNTXT) {
if (!desc->chip->set_affinity(irq, cpumask)) {
cpumask_copy(desc->affinity, cpumask);
- irq_set_thread_affinity(desc, cpumask);
+ irq_set_thread_affinity(desc);
}
}
else {
@@ -122,7 +130,7 @@
#else
if (!desc->chip->set_affinity(irq, cpumask)) {
cpumask_copy(desc->affinity, cpumask);
- irq_set_thread_affinity(desc, cpumask);
+ irq_set_thread_affinity(desc);
}
#endif
desc->status |= IRQ_AFFINITY_SET;
@@ -176,7 +184,7 @@
spin_lock_irqsave(&desc->lock, flags);
ret = setup_affinity(irq, desc);
if (!ret)
- irq_set_thread_affinity(desc, desc->affinity);
+ irq_set_thread_affinity(desc);
spin_unlock_irqrestore(&desc->lock, flags);
return ret;
@@ -443,6 +451,39 @@
return -1;
}
+#ifdef CONFIG_SMP
+/*
+ * Check whether we need to change the affinity of the interrupt thread.
+ */
+static void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
+{
+ cpumask_var_t mask;
+
+ if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
+ return;
+
+ /*
+ * In case we are out of memory we set IRQTF_AFFINITY again and
+ * try again next time
+ */
+ if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
+ set_bit(IRQTF_AFFINITY, &action->thread_flags);
+ return;
+ }
+
+ spin_lock_irq(&desc->lock);
+ cpumask_copy(mask, desc->affinity);
+ spin_unlock_irq(&desc->lock);
+
+ set_cpus_allowed_ptr(current, mask);
+ free_cpumask_var(mask);
+}
+#else
+static inline void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
+#endif
+
/*
* Interrupt handler thread
*/
@@ -458,6 +499,8 @@
while (!irq_wait_for_interrupt(action)) {
+ irq_thread_check_affinity(desc, action);
+
atomic_inc(&desc->threads_active);
spin_lock_irq(&desc->lock);
@@ -718,7 +761,6 @@
{
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action, **action_ptr;
- struct task_struct *irqthread;
unsigned long flags;
WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
@@ -766,9 +808,6 @@
desc->chip->disable(irq);
}
- irqthread = action->thread;
- action->thread = NULL;
-
spin_unlock_irqrestore(&desc->lock, flags);
unregister_handler_proc(irq, action);
@@ -776,12 +815,6 @@
/* Make sure it's not being used on another CPU: */
synchronize_irq(irq);
- if (irqthread) {
- if (!test_bit(IRQTF_DIED, &action->thread_flags))
- kthread_stop(irqthread);
- put_task_struct(irqthread);
- }
-
#ifdef CONFIG_DEBUG_SHIRQ
/*
* It's a shared IRQ -- the driver ought to be prepared for an IRQ
@@ -797,6 +830,13 @@
local_irq_restore(flags);
}
#endif
+
+ if (action->thread) {
+ if (!test_bit(IRQTF_DIED, &action->thread_flags))
+ kthread_stop(action->thread);
+ put_task_struct(action->thread);
+ }
+
return action;
}
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index cfe767c..fcb6c96 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -45,7 +45,7 @@
< nr_cpu_ids))
if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
cpumask_copy(desc->affinity, desc->pending_mask);
- irq_set_thread_affinity(desc, desc->pending_mask);
+ irq_set_thread_affinity(desc);
}
cpumask_clear(desc->pending_mask);
diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c
index 2f69bee..3fd3019 100644
--- a/kernel/irq/numa_migrate.c
+++ b/kernel/irq/numa_migrate.c
@@ -107,8 +107,8 @@
struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
{
- /* those all static, do move them */
- if (desc->irq < NR_IRQS_LEGACY)
+ /* those static or target node is -1, do not move them */
+ if (desc->irq < NR_IRQS_LEGACY || node == -1)
return desc;
if (desc->node != node)
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ae1c352..f336e21 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1228,7 +1228,7 @@
} while (*cur++ == ',');
if (*crash_size > 0) {
- while (*cur != ' ' && *cur != '@')
+ while (*cur && *cur != ' ' && *cur != '@')
cur++;
if (*cur == '@') {
cur++;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 7e95bed..385c31a 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -24,7 +24,6 @@
#include <linux/unistd.h>
#include <linux/kmod.h>
#include <linux/slab.h>
-#include <linux/mnt_namespace.h>
#include <linux/completion.h>
#include <linux/file.h>
#include <linux/fdtable.h>
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index c0fa54b..0540948 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -237,13 +237,9 @@
{
struct kprobe_insn_page *kip;
struct hlist_node *pos, *next;
- int safety;
/* Ensure no-one is preepmted on the garbages */
- mutex_unlock(&kprobe_insn_mutex);
- safety = check_safety();
- mutex_lock(&kprobe_insn_mutex);
- if (safety != 0)
+ if (check_safety())
return -EAGAIN;
hlist_for_each_entry_safe(kip, pos, next, &kprobe_insn_pages, hlist) {
@@ -698,7 +694,7 @@
p->addr = addr;
preempt_disable();
- if (!__kernel_text_address((unsigned long) p->addr) ||
+ if (!kernel_text_address((unsigned long) p->addr) ||
in_kprobes_functions((unsigned long) p->addr)) {
preempt_enable();
return -EINVAL;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 9b1a7de..eb8751a 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -180,10 +180,12 @@
* @k: thread created by kthread_create().
*
* Sets kthread_should_stop() for @k to return true, wakes it, and
- * waits for it to exit. Your threadfn() must not call do_exit()
- * itself if you use this function! This can also be called after
- * kthread_create() instead of calling wake_up_process(): the thread
- * will exit without calling threadfn().
+ * waits for it to exit. This can also be called after kthread_create()
+ * instead of calling wake_up_process(): the thread will exit without
+ * calling threadfn().
+ *
+ * If threadfn() may call do_exit() itself, the caller must ensure
+ * task_struct can't go away.
*
* Returns the result of threadfn(), or %-EINTR if wake_up_process()
* was never called.
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index d7135aa..e94caa6 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -758,7 +758,8 @@
&proc_lockdep_stats_operations);
#ifdef CONFIG_LOCK_STAT
- proc_create("lock_stat", S_IRUSR, NULL, &proc_lock_stat_operations);
+ proc_create("lock_stat", S_IRUSR | S_IWUSR, NULL,
+ &proc_lock_stat_operations);
#endif
return 0;
diff --git a/kernel/module.c b/kernel/module.c
index 38928fc..fd141140 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1068,7 +1068,8 @@
{
const unsigned long *crc;
- if (!find_symbol("module_layout", NULL, &crc, true, false))
+ if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
+ &crc, true, false))
BUG();
return check_version(sechdrs, versindex, "module_layout", mod, crc);
}
@@ -2451,9 +2452,9 @@
return ret;
}
if (ret > 0) {
- printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, "
- "it should follow 0/-E convention\n"
- KERN_WARNING "%s: loading module anyway...\n",
+ printk(KERN_WARNING
+"%s: '%s'->init suspiciously returned %d, it should follow 0/-E convention\n"
+"%s: loading module anyway...\n",
__func__, mod->name, ret,
__func__);
dump_stack();
diff --git a/kernel/panic.c b/kernel/panic.c
index 984b3ec..512ab73 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -301,6 +301,7 @@
*/
void oops_enter(void)
{
+ tracing_off();
/* can't trust the integrity of the kernel anymore: */
debug_locks_off();
do_oops_enter_exit();
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 1a933a2..534e20d 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -42,6 +42,7 @@
static atomic_t nr_counters __read_mostly;
static atomic_t nr_mmap_counters __read_mostly;
static atomic_t nr_comm_counters __read_mostly;
+static atomic_t nr_task_counters __read_mostly;
/*
* perf counter paranoia level:
@@ -87,6 +88,7 @@
void __weak hw_perf_enable(void) { barrier(); }
void __weak hw_perf_counter_setup(int cpu) { barrier(); }
+void __weak hw_perf_counter_setup_online(int cpu) { barrier(); }
int __weak
hw_perf_group_sched_in(struct perf_counter *group_leader,
@@ -146,6 +148,28 @@
}
}
+static void unclone_ctx(struct perf_counter_context *ctx)
+{
+ if (ctx->parent_ctx) {
+ put_ctx(ctx->parent_ctx);
+ ctx->parent_ctx = NULL;
+ }
+}
+
+/*
+ * If we inherit counters we want to return the parent counter id
+ * to userspace.
+ */
+static u64 primary_counter_id(struct perf_counter *counter)
+{
+ u64 id = counter->id;
+
+ if (counter->parent)
+ id = counter->parent->id;
+
+ return id;
+}
+
/*
* Get the perf_counter_context for a task and lock it.
* This has to cope with with the fact that until it is locked,
@@ -236,6 +260,8 @@
list_add_rcu(&counter->event_entry, &ctx->event_list);
ctx->nr_counters++;
+ if (counter->attr.inherit_stat)
+ ctx->nr_stat++;
}
/*
@@ -250,6 +276,8 @@
if (list_empty(&counter->list_entry))
return;
ctx->nr_counters--;
+ if (counter->attr.inherit_stat)
+ ctx->nr_stat--;
list_del_init(&counter->list_entry);
list_del_rcu(&counter->event_entry);
@@ -279,6 +307,10 @@
return;
counter->state = PERF_COUNTER_STATE_INACTIVE;
+ if (counter->pending_disable) {
+ counter->pending_disable = 0;
+ counter->state = PERF_COUNTER_STATE_OFF;
+ }
counter->tstamp_stopped = ctx->time;
counter->pmu->disable(counter);
counter->oncpu = -1;
@@ -1006,6 +1038,81 @@
&& !ctx1->pin_count && !ctx2->pin_count;
}
+static void __perf_counter_read(void *counter);
+
+static void __perf_counter_sync_stat(struct perf_counter *counter,
+ struct perf_counter *next_counter)
+{
+ u64 value;
+
+ if (!counter->attr.inherit_stat)
+ return;
+
+ /*
+ * Update the counter value, we cannot use perf_counter_read()
+ * because we're in the middle of a context switch and have IRQs
+ * disabled, which upsets smp_call_function_single(), however
+ * we know the counter must be on the current CPU, therefore we
+ * don't need to use it.
+ */
+ switch (counter->state) {
+ case PERF_COUNTER_STATE_ACTIVE:
+ __perf_counter_read(counter);
+ break;
+
+ case PERF_COUNTER_STATE_INACTIVE:
+ update_counter_times(counter);
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * In order to keep per-task stats reliable we need to flip the counter
+ * values when we flip the contexts.
+ */
+ value = atomic64_read(&next_counter->count);
+ value = atomic64_xchg(&counter->count, value);
+ atomic64_set(&next_counter->count, value);
+
+ swap(counter->total_time_enabled, next_counter->total_time_enabled);
+ swap(counter->total_time_running, next_counter->total_time_running);
+
+ /*
+ * Since we swizzled the values, update the user visible data too.
+ */
+ perf_counter_update_userpage(counter);
+ perf_counter_update_userpage(next_counter);
+}
+
+#define list_next_entry(pos, member) \
+ list_entry(pos->member.next, typeof(*pos), member)
+
+static void perf_counter_sync_stat(struct perf_counter_context *ctx,
+ struct perf_counter_context *next_ctx)
+{
+ struct perf_counter *counter, *next_counter;
+
+ if (!ctx->nr_stat)
+ return;
+
+ counter = list_first_entry(&ctx->event_list,
+ struct perf_counter, event_entry);
+
+ next_counter = list_first_entry(&next_ctx->event_list,
+ struct perf_counter, event_entry);
+
+ while (&counter->event_entry != &ctx->event_list &&
+ &next_counter->event_entry != &next_ctx->event_list) {
+
+ __perf_counter_sync_stat(counter, next_counter);
+
+ counter = list_next_entry(counter, event_entry);
+ next_counter = list_next_entry(next_counter, event_entry);
+ }
+}
+
/*
* Called from scheduler to remove the counters of the current task,
* with interrupts disabled.
@@ -1061,6 +1168,8 @@
ctx->task = next;
next_ctx->task = task;
do_switch = 0;
+
+ perf_counter_sync_stat(ctx, next_ctx);
}
spin_unlock(&next_ctx->lock);
spin_unlock(&ctx->lock);
@@ -1207,7 +1316,6 @@
#define MAX_INTERRUPTS (~0ULL)
static void perf_log_throttle(struct perf_counter *counter, int enable);
-static void perf_log_period(struct perf_counter *counter, u64 period);
static void perf_adjust_period(struct perf_counter *counter, u64 events)
{
@@ -1226,8 +1334,6 @@
if (!sample_period)
sample_period = 1;
- perf_log_period(counter, sample_period);
-
hwc->sample_period = sample_period;
}
@@ -1348,9 +1454,54 @@
}
/*
+ * Enable all of a task's counters that have been marked enable-on-exec.
+ * This expects task == current.
+ */
+static void perf_counter_enable_on_exec(struct task_struct *task)
+{
+ struct perf_counter_context *ctx;
+ struct perf_counter *counter;
+ unsigned long flags;
+ int enabled = 0;
+
+ local_irq_save(flags);
+ ctx = task->perf_counter_ctxp;
+ if (!ctx || !ctx->nr_counters)
+ goto out;
+
+ __perf_counter_task_sched_out(ctx);
+
+ spin_lock(&ctx->lock);
+
+ list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+ if (!counter->attr.enable_on_exec)
+ continue;
+ counter->attr.enable_on_exec = 0;
+ if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
+ continue;
+ counter->state = PERF_COUNTER_STATE_INACTIVE;
+ counter->tstamp_enabled =
+ ctx->time - counter->total_time_enabled;
+ enabled = 1;
+ }
+
+ /*
+ * Unclone this context if we enabled any counter.
+ */
+ if (enabled)
+ unclone_ctx(ctx);
+
+ spin_unlock(&ctx->lock);
+
+ perf_counter_task_sched_in(task, smp_processor_id());
+ out:
+ local_irq_restore(flags);
+}
+
+/*
* Cross CPU call to read the hardware counter
*/
-static void __read(void *info)
+static void __perf_counter_read(void *info)
{
struct perf_counter *counter = info;
struct perf_counter_context *ctx = counter->ctx;
@@ -1372,7 +1523,7 @@
*/
if (counter->state == PERF_COUNTER_STATE_ACTIVE) {
smp_call_function_single(counter->oncpu,
- __read, counter, 1);
+ __perf_counter_read, counter, 1);
} else if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
update_counter_times(counter);
}
@@ -1398,7 +1549,6 @@
static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
{
- struct perf_counter_context *parent_ctx;
struct perf_counter_context *ctx;
struct perf_cpu_context *cpuctx;
struct task_struct *task;
@@ -1458,11 +1608,7 @@
retry:
ctx = perf_lock_task_context(task, &flags);
if (ctx) {
- parent_ctx = ctx->parent_ctx;
- if (parent_ctx) {
- put_ctx(parent_ctx);
- ctx->parent_ctx = NULL; /* no longer a clone */
- }
+ unclone_ctx(ctx);
spin_unlock_irqrestore(&ctx->lock, flags);
}
@@ -1508,11 +1654,15 @@
{
perf_pending_sync(counter);
- atomic_dec(&nr_counters);
- if (counter->attr.mmap)
- atomic_dec(&nr_mmap_counters);
- if (counter->attr.comm)
- atomic_dec(&nr_comm_counters);
+ if (!counter->parent) {
+ atomic_dec(&nr_counters);
+ if (counter->attr.mmap)
+ atomic_dec(&nr_mmap_counters);
+ if (counter->attr.comm)
+ atomic_dec(&nr_comm_counters);
+ if (counter->attr.task)
+ atomic_dec(&nr_task_counters);
+ }
if (counter->destroy)
counter->destroy(counter);
@@ -1546,14 +1696,133 @@
return 0;
}
+static int perf_counter_read_size(struct perf_counter *counter)
+{
+ int entry = sizeof(u64); /* value */
+ int size = 0;
+ int nr = 1;
+
+ if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+ size += sizeof(u64);
+
+ if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+ size += sizeof(u64);
+
+ if (counter->attr.read_format & PERF_FORMAT_ID)
+ entry += sizeof(u64);
+
+ if (counter->attr.read_format & PERF_FORMAT_GROUP) {
+ nr += counter->group_leader->nr_siblings;
+ size += sizeof(u64);
+ }
+
+ size += entry * nr;
+
+ return size;
+}
+
+static u64 perf_counter_read_value(struct perf_counter *counter)
+{
+ struct perf_counter *child;
+ u64 total = 0;
+
+ total += perf_counter_read(counter);
+ list_for_each_entry(child, &counter->child_list, child_list)
+ total += perf_counter_read(child);
+
+ return total;
+}
+
+static int perf_counter_read_entry(struct perf_counter *counter,
+ u64 read_format, char __user *buf)
+{
+ int n = 0, count = 0;
+ u64 values[2];
+
+ values[n++] = perf_counter_read_value(counter);
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(counter);
+
+ count = n * sizeof(u64);
+
+ if (copy_to_user(buf, values, count))
+ return -EFAULT;
+
+ return count;
+}
+
+static int perf_counter_read_group(struct perf_counter *counter,
+ u64 read_format, char __user *buf)
+{
+ struct perf_counter *leader = counter->group_leader, *sub;
+ int n = 0, size = 0, err = -EFAULT;
+ u64 values[3];
+
+ values[n++] = 1 + leader->nr_siblings;
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ values[n++] = leader->total_time_enabled +
+ atomic64_read(&leader->child_total_time_enabled);
+ }
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ values[n++] = leader->total_time_running +
+ atomic64_read(&leader->child_total_time_running);
+ }
+
+ size = n * sizeof(u64);
+
+ if (copy_to_user(buf, values, size))
+ return -EFAULT;
+
+ err = perf_counter_read_entry(leader, read_format, buf + size);
+ if (err < 0)
+ return err;
+
+ size += err;
+
+ list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+ err = perf_counter_read_entry(counter, read_format,
+ buf + size);
+ if (err < 0)
+ return err;
+
+ size += err;
+ }
+
+ return size;
+}
+
+static int perf_counter_read_one(struct perf_counter *counter,
+ u64 read_format, char __user *buf)
+{
+ u64 values[4];
+ int n = 0;
+
+ values[n++] = perf_counter_read_value(counter);
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ values[n++] = counter->total_time_enabled +
+ atomic64_read(&counter->child_total_time_enabled);
+ }
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ values[n++] = counter->total_time_running +
+ atomic64_read(&counter->child_total_time_running);
+ }
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(counter);
+
+ if (copy_to_user(buf, values, n * sizeof(u64)))
+ return -EFAULT;
+
+ return n * sizeof(u64);
+}
+
/*
* Read the performance counter - simple non blocking version for now
*/
static ssize_t
perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
{
- u64 values[4];
- int n;
+ u64 read_format = counter->attr.read_format;
+ int ret;
/*
* Return end-of-file for a read on a counter that is in
@@ -1563,28 +1832,18 @@
if (counter->state == PERF_COUNTER_STATE_ERROR)
return 0;
+ if (count < perf_counter_read_size(counter))
+ return -ENOSPC;
+
WARN_ON_ONCE(counter->ctx->parent_ctx);
mutex_lock(&counter->child_mutex);
- values[0] = perf_counter_read(counter);
- n = 1;
- if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
- values[n++] = counter->total_time_enabled +
- atomic64_read(&counter->child_total_time_enabled);
- if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
- values[n++] = counter->total_time_running +
- atomic64_read(&counter->child_total_time_running);
- if (counter->attr.read_format & PERF_FORMAT_ID)
- values[n++] = counter->id;
+ if (read_format & PERF_FORMAT_GROUP)
+ ret = perf_counter_read_group(counter, read_format, buf);
+ else
+ ret = perf_counter_read_one(counter, read_format, buf);
mutex_unlock(&counter->child_mutex);
- if (count < n * sizeof(u64))
- return -EINVAL;
- count = n * sizeof(u64);
-
- if (copy_to_user(buf, values, count))
- return -EFAULT;
-
- return count;
+ return ret;
}
static ssize_t
@@ -1681,8 +1940,6 @@
counter->attr.sample_freq = value;
} else {
- perf_log_period(counter, value);
-
counter->attr.sample_period = value;
counter->hw.sample_period = value;
}
@@ -1751,6 +2008,14 @@
return 0;
}
+static int perf_counter_index(struct perf_counter *counter)
+{
+ if (counter->state != PERF_COUNTER_STATE_ACTIVE)
+ return 0;
+
+ return counter->hw.idx + 1 - PERF_COUNTER_INDEX_OFFSET;
+}
+
/*
* Callers need to ensure there can be no nesting of this function, otherwise
* the seqlock logic goes bad. We can not serialize this because the arch
@@ -1775,11 +2040,17 @@
preempt_disable();
++userpg->lock;
barrier();
- userpg->index = counter->hw.idx;
+ userpg->index = perf_counter_index(counter);
userpg->offset = atomic64_read(&counter->count);
if (counter->state == PERF_COUNTER_STATE_ACTIVE)
userpg->offset -= atomic64_read(&counter->hw.prev_count);
+ userpg->time_enabled = counter->total_time_enabled +
+ atomic64_read(&counter->child_total_time_enabled);
+
+ userpg->time_running = counter->total_time_running +
+ atomic64_read(&counter->child_total_time_running);
+
barrier();
++userpg->lock;
preempt_enable();
@@ -1876,7 +2147,7 @@
static void perf_mmap_free_page(unsigned long addr)
{
- struct page *page = virt_to_page(addr);
+ struct page *page = virt_to_page((void *)addr);
page->mapping = NULL;
__free_page(page);
@@ -2076,7 +2347,7 @@
if (counter->pending_disable) {
counter->pending_disable = 0;
- perf_counter_disable(counter);
+ __perf_counter_disable(counter);
}
if (counter->pending_wakeup) {
@@ -2461,7 +2732,80 @@
return task_pid_nr_ns(p, counter->ns);
}
-static void perf_counter_output(struct perf_counter *counter, int nmi,
+static void perf_output_read_one(struct perf_output_handle *handle,
+ struct perf_counter *counter)
+{
+ u64 read_format = counter->attr.read_format;
+ u64 values[4];
+ int n = 0;
+
+ values[n++] = atomic64_read(&counter->count);
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+ values[n++] = counter->total_time_enabled +
+ atomic64_read(&counter->child_total_time_enabled);
+ }
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+ values[n++] = counter->total_time_running +
+ atomic64_read(&counter->child_total_time_running);
+ }
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(counter);
+
+ perf_output_copy(handle, values, n * sizeof(u64));
+}
+
+/*
+ * XXX PERF_FORMAT_GROUP vs inherited counters seems difficult.
+ */
+static void perf_output_read_group(struct perf_output_handle *handle,
+ struct perf_counter *counter)
+{
+ struct perf_counter *leader = counter->group_leader, *sub;
+ u64 read_format = counter->attr.read_format;
+ u64 values[5];
+ int n = 0;
+
+ values[n++] = 1 + leader->nr_siblings;
+
+ if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+ values[n++] = leader->total_time_enabled;
+
+ if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+ values[n++] = leader->total_time_running;
+
+ if (leader != counter)
+ leader->pmu->read(leader);
+
+ values[n++] = atomic64_read(&leader->count);
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(leader);
+
+ perf_output_copy(handle, values, n * sizeof(u64));
+
+ list_for_each_entry(sub, &leader->sibling_list, list_entry) {
+ n = 0;
+
+ if (sub != counter)
+ sub->pmu->read(sub);
+
+ values[n++] = atomic64_read(&sub->count);
+ if (read_format & PERF_FORMAT_ID)
+ values[n++] = primary_counter_id(sub);
+
+ perf_output_copy(handle, values, n * sizeof(u64));
+ }
+}
+
+static void perf_output_read(struct perf_output_handle *handle,
+ struct perf_counter *counter)
+{
+ if (counter->attr.read_format & PERF_FORMAT_GROUP)
+ perf_output_read_group(handle, counter);
+ else
+ perf_output_read_one(handle, counter);
+}
+
+void perf_counter_output(struct perf_counter *counter, int nmi,
struct perf_sample_data *data)
{
int ret;
@@ -2472,10 +2816,6 @@
struct {
u32 pid, tid;
} tid_entry;
- struct {
- u64 id;
- u64 counter;
- } group_entry;
struct perf_callchain_entry *callchain = NULL;
int callchain_size = 0;
u64 time;
@@ -2483,15 +2823,14 @@
u32 cpu, reserved;
} cpu_entry;
- header.type = 0;
+ header.type = PERF_EVENT_SAMPLE;
header.size = sizeof(header);
- header.misc = PERF_EVENT_MISC_OVERFLOW;
+ header.misc = 0;
header.misc |= perf_misc_flags(data->regs);
if (sample_type & PERF_SAMPLE_IP) {
ip = perf_instruction_pointer(data->regs);
- header.type |= PERF_SAMPLE_IP;
header.size += sizeof(ip);
}
@@ -2500,7 +2839,6 @@
tid_entry.pid = perf_counter_pid(counter, current);
tid_entry.tid = perf_counter_tid(counter, current);
- header.type |= PERF_SAMPLE_TID;
header.size += sizeof(tid_entry);
}
@@ -2510,47 +2848,51 @@
*/
time = sched_clock();
- header.type |= PERF_SAMPLE_TIME;
header.size += sizeof(u64);
}
- if (sample_type & PERF_SAMPLE_ADDR) {
- header.type |= PERF_SAMPLE_ADDR;
+ if (sample_type & PERF_SAMPLE_ADDR)
header.size += sizeof(u64);
- }
- if (sample_type & PERF_SAMPLE_ID) {
- header.type |= PERF_SAMPLE_ID;
+ if (sample_type & PERF_SAMPLE_ID)
header.size += sizeof(u64);
- }
+
+ if (sample_type & PERF_SAMPLE_STREAM_ID)
+ header.size += sizeof(u64);
if (sample_type & PERF_SAMPLE_CPU) {
- header.type |= PERF_SAMPLE_CPU;
header.size += sizeof(cpu_entry);
cpu_entry.cpu = raw_smp_processor_id();
+ cpu_entry.reserved = 0;
}
- if (sample_type & PERF_SAMPLE_PERIOD) {
- header.type |= PERF_SAMPLE_PERIOD;
+ if (sample_type & PERF_SAMPLE_PERIOD)
header.size += sizeof(u64);
- }
- if (sample_type & PERF_SAMPLE_GROUP) {
- header.type |= PERF_SAMPLE_GROUP;
- header.size += sizeof(u64) +
- counter->nr_siblings * sizeof(group_entry);
- }
+ if (sample_type & PERF_SAMPLE_READ)
+ header.size += perf_counter_read_size(counter);
if (sample_type & PERF_SAMPLE_CALLCHAIN) {
callchain = perf_callchain(data->regs);
if (callchain) {
callchain_size = (1 + callchain->nr) * sizeof(u64);
-
- header.type |= PERF_SAMPLE_CALLCHAIN;
header.size += callchain_size;
- }
+ } else
+ header.size += sizeof(u64);
+ }
+
+ if (sample_type & PERF_SAMPLE_RAW) {
+ int size = sizeof(u32);
+
+ if (data->raw)
+ size += data->raw->size;
+ else
+ size += sizeof(u32);
+
+ WARN_ON_ONCE(size & (sizeof(u64)-1));
+ header.size += size;
}
ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
@@ -2571,7 +2913,13 @@
if (sample_type & PERF_SAMPLE_ADDR)
perf_output_put(&handle, data->addr);
- if (sample_type & PERF_SAMPLE_ID)
+ if (sample_type & PERF_SAMPLE_ID) {
+ u64 id = primary_counter_id(counter);
+
+ perf_output_put(&handle, id);
+ }
+
+ if (sample_type & PERF_SAMPLE_STREAM_ID)
perf_output_put(&handle, counter->id);
if (sample_type & PERF_SAMPLE_CPU)
@@ -2580,76 +2928,125 @@
if (sample_type & PERF_SAMPLE_PERIOD)
perf_output_put(&handle, data->period);
- /*
- * XXX PERF_SAMPLE_GROUP vs inherited counters seems difficult.
- */
- if (sample_type & PERF_SAMPLE_GROUP) {
- struct perf_counter *leader, *sub;
- u64 nr = counter->nr_siblings;
+ if (sample_type & PERF_SAMPLE_READ)
+ perf_output_read(&handle, counter);
- perf_output_put(&handle, nr);
-
- leader = counter->group_leader;
- list_for_each_entry(sub, &leader->sibling_list, list_entry) {
- if (sub != counter)
- sub->pmu->read(sub);
-
- group_entry.id = sub->id;
- group_entry.counter = atomic64_read(&sub->count);
-
- perf_output_put(&handle, group_entry);
+ if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+ if (callchain)
+ perf_output_copy(&handle, callchain, callchain_size);
+ else {
+ u64 nr = 0;
+ perf_output_put(&handle, nr);
}
}
- if (callchain)
- perf_output_copy(&handle, callchain, callchain_size);
+ if (sample_type & PERF_SAMPLE_RAW) {
+ if (data->raw) {
+ perf_output_put(&handle, data->raw->size);
+ perf_output_copy(&handle, data->raw->data, data->raw->size);
+ } else {
+ struct {
+ u32 size;
+ u32 data;
+ } raw = {
+ .size = sizeof(u32),
+ .data = 0,
+ };
+ perf_output_put(&handle, raw);
+ }
+ }
perf_output_end(&handle);
}
/*
- * fork tracking
+ * read event
*/
-struct perf_fork_event {
- struct task_struct *task;
+struct perf_read_event {
+ struct perf_event_header header;
+
+ u32 pid;
+ u32 tid;
+};
+
+static void
+perf_counter_read_event(struct perf_counter *counter,
+ struct task_struct *task)
+{
+ struct perf_output_handle handle;
+ struct perf_read_event event = {
+ .header = {
+ .type = PERF_EVENT_READ,
+ .misc = 0,
+ .size = sizeof(event) + perf_counter_read_size(counter),
+ },
+ .pid = perf_counter_pid(counter, task),
+ .tid = perf_counter_tid(counter, task),
+ };
+ int ret;
+
+ ret = perf_output_begin(&handle, counter, event.header.size, 0, 0);
+ if (ret)
+ return;
+
+ perf_output_put(&handle, event);
+ perf_output_read(&handle, counter);
+
+ perf_output_end(&handle);
+}
+
+/*
+ * task tracking -- fork/exit
+ *
+ * enabled by: attr.comm | attr.mmap | attr.task
+ */
+
+struct perf_task_event {
+ struct task_struct *task;
+ struct perf_counter_context *task_ctx;
struct {
struct perf_event_header header;
u32 pid;
u32 ppid;
+ u32 tid;
+ u32 ptid;
} event;
};
-static void perf_counter_fork_output(struct perf_counter *counter,
- struct perf_fork_event *fork_event)
+static void perf_counter_task_output(struct perf_counter *counter,
+ struct perf_task_event *task_event)
{
struct perf_output_handle handle;
- int size = fork_event->event.header.size;
- struct task_struct *task = fork_event->task;
+ int size = task_event->event.header.size;
+ struct task_struct *task = task_event->task;
int ret = perf_output_begin(&handle, counter, size, 0, 0);
if (ret)
return;
- fork_event->event.pid = perf_counter_pid(counter, task);
- fork_event->event.ppid = perf_counter_pid(counter, task->real_parent);
+ task_event->event.pid = perf_counter_pid(counter, task);
+ task_event->event.ppid = perf_counter_pid(counter, current);
- perf_output_put(&handle, fork_event->event);
+ task_event->event.tid = perf_counter_tid(counter, task);
+ task_event->event.ptid = perf_counter_tid(counter, current);
+
+ perf_output_put(&handle, task_event->event);
perf_output_end(&handle);
}
-static int perf_counter_fork_match(struct perf_counter *counter)
+static int perf_counter_task_match(struct perf_counter *counter)
{
- if (counter->attr.comm || counter->attr.mmap)
+ if (counter->attr.comm || counter->attr.mmap || counter->attr.task)
return 1;
return 0;
}
-static void perf_counter_fork_ctx(struct perf_counter_context *ctx,
- struct perf_fork_event *fork_event)
+static void perf_counter_task_ctx(struct perf_counter_context *ctx,
+ struct perf_task_event *task_event)
{
struct perf_counter *counter;
@@ -2658,51 +3055,62 @@
rcu_read_lock();
list_for_each_entry_rcu(counter, &ctx->event_list, event_entry) {
- if (perf_counter_fork_match(counter))
- perf_counter_fork_output(counter, fork_event);
+ if (perf_counter_task_match(counter))
+ perf_counter_task_output(counter, task_event);
}
rcu_read_unlock();
}
-static void perf_counter_fork_event(struct perf_fork_event *fork_event)
+static void perf_counter_task_event(struct perf_task_event *task_event)
{
struct perf_cpu_context *cpuctx;
- struct perf_counter_context *ctx;
+ struct perf_counter_context *ctx = task_event->task_ctx;
cpuctx = &get_cpu_var(perf_cpu_context);
- perf_counter_fork_ctx(&cpuctx->ctx, fork_event);
+ perf_counter_task_ctx(&cpuctx->ctx, task_event);
put_cpu_var(perf_cpu_context);
rcu_read_lock();
- /*
- * doesn't really matter which of the child contexts the
- * events ends up in.
- */
- ctx = rcu_dereference(current->perf_counter_ctxp);
+ if (!ctx)
+ ctx = rcu_dereference(task_event->task->perf_counter_ctxp);
if (ctx)
- perf_counter_fork_ctx(ctx, fork_event);
+ perf_counter_task_ctx(ctx, task_event);
rcu_read_unlock();
}
+static void perf_counter_task(struct task_struct *task,
+ struct perf_counter_context *task_ctx,
+ int new)
+{
+ struct perf_task_event task_event;
+
+ if (!atomic_read(&nr_comm_counters) &&
+ !atomic_read(&nr_mmap_counters) &&
+ !atomic_read(&nr_task_counters))
+ return;
+
+ task_event = (struct perf_task_event){
+ .task = task,
+ .task_ctx = task_ctx,
+ .event = {
+ .header = {
+ .type = new ? PERF_EVENT_FORK : PERF_EVENT_EXIT,
+ .misc = 0,
+ .size = sizeof(task_event.event),
+ },
+ /* .pid */
+ /* .ppid */
+ /* .tid */
+ /* .ptid */
+ },
+ };
+
+ perf_counter_task_event(&task_event);
+}
+
void perf_counter_fork(struct task_struct *task)
{
- struct perf_fork_event fork_event;
-
- if (!atomic_read(&nr_comm_counters) &&
- !atomic_read(&nr_mmap_counters))
- return;
-
- fork_event = (struct perf_fork_event){
- .task = task,
- .event = {
- .header = {
- .type = PERF_EVENT_FORK,
- .size = sizeof(fork_event.event),
- },
- },
- };
-
- perf_counter_fork_event(&fork_event);
+ perf_counter_task(task, NULL, 1);
}
/*
@@ -2770,8 +3178,10 @@
struct perf_cpu_context *cpuctx;
struct perf_counter_context *ctx;
unsigned int size;
- char *comm = comm_event->task->comm;
+ char comm[TASK_COMM_LEN];
+ memset(comm, 0, sizeof(comm));
+ strncpy(comm, comm_event->task->comm, sizeof(comm));
size = ALIGN(strlen(comm)+1, sizeof(u64));
comm_event->comm = comm;
@@ -2798,13 +3208,24 @@
{
struct perf_comm_event comm_event;
+ if (task->perf_counter_ctxp)
+ perf_counter_enable_on_exec(task);
+
if (!atomic_read(&nr_comm_counters))
return;
comm_event = (struct perf_comm_event){
.task = task,
+ /* .comm */
+ /* .comm_size */
.event = {
- .header = { .type = PERF_EVENT_COMM, },
+ .header = {
+ .type = PERF_EVENT_COMM,
+ .misc = 0,
+ /* .size */
+ },
+ /* .pid */
+ /* .tid */
},
};
@@ -2887,8 +3308,15 @@
char *buf = NULL;
const char *name;
+ memset(tmp, 0, sizeof(tmp));
+
if (file) {
- buf = kzalloc(PATH_MAX, GFP_KERNEL);
+ /*
+ * d_path works from the end of the buffer backwards, so we
+ * need to add enough zero bytes after the string to handle
+ * the 64bit alignment we do later.
+ */
+ buf = kzalloc(PATH_MAX + sizeof(u64), GFP_KERNEL);
if (!buf) {
name = strncpy(tmp, "//enomem", sizeof(tmp));
goto got_name;
@@ -2899,9 +3327,11 @@
goto got_name;
}
} else {
- name = arch_vma_name(mmap_event->vma);
- if (name)
+ if (arch_vma_name(mmap_event->vma)) {
+ name = strncpy(tmp, arch_vma_name(mmap_event->vma),
+ sizeof(tmp));
goto got_name;
+ }
if (!vma->vm_mm) {
name = strncpy(tmp, "[vdso]", sizeof(tmp));
@@ -2946,8 +3376,16 @@
mmap_event = (struct perf_mmap_event){
.vma = vma,
+ /* .file_name */
+ /* .file_size */
.event = {
- .header = { .type = PERF_EVENT_MMAP, },
+ .header = {
+ .type = PERF_EVENT_MMAP,
+ .misc = 0,
+ /* .size */
+ },
+ /* .pid */
+ /* .tid */
.start = vma->vm_start,
.len = vma->vm_end - vma->vm_start,
.pgoff = vma->vm_pgoff,
@@ -2958,49 +3396,6 @@
}
/*
- * Log sample_period changes so that analyzing tools can re-normalize the
- * event flow.
- */
-
-struct freq_event {
- struct perf_event_header header;
- u64 time;
- u64 id;
- u64 period;
-};
-
-static void perf_log_period(struct perf_counter *counter, u64 period)
-{
- struct perf_output_handle handle;
- struct freq_event event;
- int ret;
-
- if (counter->hw.sample_period == period)
- return;
-
- if (counter->attr.sample_type & PERF_SAMPLE_PERIOD)
- return;
-
- event = (struct freq_event) {
- .header = {
- .type = PERF_EVENT_PERIOD,
- .misc = 0,
- .size = sizeof(event),
- },
- .time = sched_clock(),
- .id = counter->id,
- .period = period,
- };
-
- ret = perf_output_begin(&handle, counter, sizeof(event), 1, 0);
- if (ret)
- return;
-
- perf_output_put(&handle, event);
- perf_output_end(&handle);
-}
-
-/*
* IRQ throttle logging
*/
@@ -3013,16 +3408,21 @@
struct perf_event_header header;
u64 time;
u64 id;
+ u64 stream_id;
} throttle_event = {
.header = {
- .type = PERF_EVENT_THROTTLE + 1,
+ .type = PERF_EVENT_THROTTLE,
.misc = 0,
.size = sizeof(throttle_event),
},
- .time = sched_clock(),
- .id = counter->id,
+ .time = sched_clock(),
+ .id = primary_counter_id(counter),
+ .stream_id = counter->id,
};
+ if (enable)
+ throttle_event.header.type = PERF_EVENT_UNTHROTTLE;
+
ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0);
if (ret)
return;
@@ -3099,125 +3499,111 @@
* Generic software counter infrastructure
*/
-static void perf_swcounter_update(struct perf_counter *counter)
+/*
+ * We directly increment counter->count and keep a second value in
+ * counter->hw.period_left to count intervals. This period counter
+ * is kept in the range [-sample_period, 0] so that we can use the
+ * sign as trigger.
+ */
+
+static u64 perf_swcounter_set_period(struct perf_counter *counter)
{
struct hw_perf_counter *hwc = &counter->hw;
- u64 prev, now;
- s64 delta;
+ u64 period = hwc->last_period;
+ u64 nr, offset;
+ s64 old, val;
+
+ hwc->last_period = hwc->sample_period;
again:
- prev = atomic64_read(&hwc->prev_count);
- now = atomic64_read(&hwc->count);
- if (atomic64_cmpxchg(&hwc->prev_count, prev, now) != prev)
+ old = val = atomic64_read(&hwc->period_left);
+ if (val < 0)
+ return 0;
+
+ nr = div64_u64(period + val, period);
+ offset = nr * period;
+ val -= offset;
+ if (atomic64_cmpxchg(&hwc->period_left, old, val) != old)
goto again;
- delta = now - prev;
-
- atomic64_add(delta, &counter->count);
- atomic64_sub(delta, &hwc->period_left);
-}
-
-static void perf_swcounter_set_period(struct perf_counter *counter)
-{
- struct hw_perf_counter *hwc = &counter->hw;
- s64 left = atomic64_read(&hwc->period_left);
- s64 period = hwc->sample_period;
-
- if (unlikely(left <= -period)) {
- left = period;
- atomic64_set(&hwc->period_left, left);
- hwc->last_period = period;
- }
-
- if (unlikely(left <= 0)) {
- left += period;
- atomic64_add(period, &hwc->period_left);
- hwc->last_period = period;
- }
-
- atomic64_set(&hwc->prev_count, -left);
- atomic64_set(&hwc->count, -left);
-}
-
-static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
-{
- enum hrtimer_restart ret = HRTIMER_RESTART;
- struct perf_sample_data data;
- struct perf_counter *counter;
- u64 period;
-
- counter = container_of(hrtimer, struct perf_counter, hw.hrtimer);
- counter->pmu->read(counter);
-
- data.addr = 0;
- data.regs = get_irq_regs();
- /*
- * In case we exclude kernel IPs or are somehow not in interrupt
- * context, provide the next best thing, the user IP.
- */
- if ((counter->attr.exclude_kernel || !data.regs) &&
- !counter->attr.exclude_user)
- data.regs = task_pt_regs(current);
-
- if (data.regs) {
- if (perf_counter_overflow(counter, 0, &data))
- ret = HRTIMER_NORESTART;
- }
-
- period = max_t(u64, 10000, counter->hw.sample_period);
- hrtimer_forward_now(hrtimer, ns_to_ktime(period));
-
- return ret;
+ return nr;
}
static void perf_swcounter_overflow(struct perf_counter *counter,
int nmi, struct perf_sample_data *data)
{
- data->period = counter->hw.last_period;
+ struct hw_perf_counter *hwc = &counter->hw;
+ u64 overflow;
- perf_swcounter_update(counter);
- perf_swcounter_set_period(counter);
- if (perf_counter_overflow(counter, nmi, data))
- /* soft-disable the counter */
- ;
+ data->period = counter->hw.last_period;
+ overflow = perf_swcounter_set_period(counter);
+
+ if (hwc->interrupts == MAX_INTERRUPTS)
+ return;
+
+ for (; overflow; overflow--) {
+ if (perf_counter_overflow(counter, nmi, data)) {
+ /*
+ * We inhibit the overflow from happening when
+ * hwc->interrupts == MAX_INTERRUPTS.
+ */
+ break;
+ }
+ }
+}
+
+static void perf_swcounter_unthrottle(struct perf_counter *counter)
+{
+ /*
+ * Nothing to do, we already reset hwc->interrupts.
+ */
+}
+
+static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
+ int nmi, struct perf_sample_data *data)
+{
+ struct hw_perf_counter *hwc = &counter->hw;
+
+ atomic64_add(nr, &counter->count);
+
+ if (!hwc->sample_period)
+ return;
+
+ if (!data->regs)
+ return;
+
+ if (!atomic64_add_negative(nr, &hwc->period_left))
+ perf_swcounter_overflow(counter, nmi, data);
}
static int perf_swcounter_is_counting(struct perf_counter *counter)
{
- struct perf_counter_context *ctx;
- unsigned long flags;
- int count;
-
+ /*
+ * The counter is active, we're good!
+ */
if (counter->state == PERF_COUNTER_STATE_ACTIVE)
return 1;
+ /*
+ * The counter is off/error, not counting.
+ */
if (counter->state != PERF_COUNTER_STATE_INACTIVE)
return 0;
/*
- * If the counter is inactive, it could be just because
- * its task is scheduled out, or because it's in a group
- * which could not go on the PMU. We want to count in
- * the first case but not the second. If the context is
- * currently active then an inactive software counter must
- * be the second case. If it's not currently active then
- * we need to know whether the counter was active when the
- * context was last active, which we can determine by
- * comparing counter->tstamp_stopped with ctx->time.
- *
- * We are within an RCU read-side critical section,
- * which protects the existence of *ctx.
+ * The counter is inactive, if the context is active
+ * we're part of a group that didn't make it on the 'pmu',
+ * not counting.
*/
- ctx = counter->ctx;
- spin_lock_irqsave(&ctx->lock, flags);
- count = 1;
- /* Re-check state now we have the lock */
- if (counter->state < PERF_COUNTER_STATE_INACTIVE ||
- counter->ctx->is_active ||
- counter->tstamp_stopped < ctx->time)
- count = 0;
- spin_unlock_irqrestore(&ctx->lock, flags);
- return count;
+ if (counter->ctx->is_active)
+ return 0;
+
+ /*
+ * We're inactive and the context is too, this means the
+ * task is scheduled out, we're counting events that happen
+ * to us, like migration events.
+ */
+ return 1;
}
static int perf_swcounter_match(struct perf_counter *counter,
@@ -3243,15 +3629,6 @@
return 1;
}
-static void perf_swcounter_add(struct perf_counter *counter, u64 nr,
- int nmi, struct perf_sample_data *data)
-{
- int neg = atomic64_add_negative(nr, &counter->hw.count);
-
- if (counter->hw.sample_period && !neg && data->regs)
- perf_swcounter_overflow(counter, nmi, data);
-}
-
static void perf_swcounter_ctx_event(struct perf_counter_context *ctx,
enum perf_type_id type,
u32 event, u64 nr, int nmi,
@@ -3317,8 +3694,8 @@
put_cpu_var(perf_cpu_context);
}
-void
-perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+void __perf_swcounter_event(u32 event, u64 nr, int nmi,
+ struct pt_regs *regs, u64 addr)
{
struct perf_sample_data data = {
.regs = regs,
@@ -3330,27 +3707,66 @@
static void perf_swcounter_read(struct perf_counter *counter)
{
- perf_swcounter_update(counter);
}
static int perf_swcounter_enable(struct perf_counter *counter)
{
- perf_swcounter_set_period(counter);
+ struct hw_perf_counter *hwc = &counter->hw;
+
+ if (hwc->sample_period) {
+ hwc->last_period = hwc->sample_period;
+ perf_swcounter_set_period(counter);
+ }
return 0;
}
static void perf_swcounter_disable(struct perf_counter *counter)
{
- perf_swcounter_update(counter);
}
static const struct pmu perf_ops_generic = {
.enable = perf_swcounter_enable,
.disable = perf_swcounter_disable,
.read = perf_swcounter_read,
+ .unthrottle = perf_swcounter_unthrottle,
};
/*
+ * hrtimer based swcounter callback
+ */
+
+static enum hrtimer_restart perf_swcounter_hrtimer(struct hrtimer *hrtimer)
+{
+ enum hrtimer_restart ret = HRTIMER_RESTART;
+ struct perf_sample_data data;
+ struct perf_counter *counter;
+ u64 period;
+
+ counter = container_of(hrtimer, struct perf_counter, hw.hrtimer);
+ counter->pmu->read(counter);
+
+ data.addr = 0;
+ data.regs = get_irq_regs();
+ /*
+ * In case we exclude kernel IPs or are somehow not in interrupt
+ * context, provide the next best thing, the user IP.
+ */
+ if ((counter->attr.exclude_kernel || !data.regs) &&
+ !counter->attr.exclude_user)
+ data.regs = task_pt_regs(current);
+
+ if (data.regs) {
+ if (perf_counter_overflow(counter, 0, &data))
+ ret = HRTIMER_NORESTART;
+ }
+
+ period = max_t(u64, 10000, counter->hw.sample_period);
+ hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+
+ return ret;
+}
+
+/*
* Software counter: cpu wall time clock
*/
@@ -3467,17 +3883,24 @@
};
#ifdef CONFIG_EVENT_PROFILE
-void perf_tpcounter_event(int event_id)
+void perf_tpcounter_event(int event_id, u64 addr, u64 count, void *record,
+ int entry_size)
{
+ struct perf_raw_record raw = {
+ .size = entry_size,
+ .data = record,
+ };
+
struct perf_sample_data data = {
- .regs = get_irq_regs();
- .addr = 0,
+ .regs = get_irq_regs(),
+ .addr = addr,
+ .raw = &raw,
};
if (!data.regs)
data.regs = task_pt_regs(current);
- do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, 1, 1, &data);
+ do_perf_swcounter_event(PERF_TYPE_TRACEPOINT, event_id, count, 1, &data);
}
EXPORT_SYMBOL_GPL(perf_tpcounter_event);
@@ -3486,16 +3909,20 @@
static void tp_perf_counter_destroy(struct perf_counter *counter)
{
- ftrace_profile_disable(perf_event_id(&counter->attr));
+ ftrace_profile_disable(counter->attr.config);
}
static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
{
- int event_id = perf_event_id(&counter->attr);
- int ret;
+ /*
+ * Raw tracepoint data is a severe data leak, only allow root to
+ * have these.
+ */
+ if ((counter->attr.sample_type & PERF_SAMPLE_RAW) &&
+ !capable(CAP_SYS_ADMIN))
+ return ERR_PTR(-EPERM);
- ret = ftrace_profile_enable(event_id);
- if (ret)
+ if (ftrace_profile_enable(counter->attr.config))
return NULL;
counter->destroy = tp_perf_counter_destroy;
@@ -3509,9 +3936,21 @@
}
#endif
+atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+static void sw_perf_counter_destroy(struct perf_counter *counter)
+{
+ u64 event = counter->attr.config;
+
+ WARN_ON(counter->parent);
+
+ atomic_dec(&perf_swcounter_enabled[event]);
+}
+
static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
{
const struct pmu *pmu = NULL;
+ u64 event = counter->attr.config;
/*
* Software counters (currently) can't in general distinguish
@@ -3520,7 +3959,7 @@
* to be kernel events, and page faults are never hypervisor
* events.
*/
- switch (counter->attr.config) {
+ switch (event) {
case PERF_COUNT_SW_CPU_CLOCK:
pmu = &perf_ops_cpu_clock;
@@ -3541,6 +3980,10 @@
case PERF_COUNT_SW_PAGE_FAULTS_MAJ:
case PERF_COUNT_SW_CONTEXT_SWITCHES:
case PERF_COUNT_SW_CPU_MIGRATIONS:
+ if (!counter->parent) {
+ atomic_inc(&perf_swcounter_enabled[event]);
+ counter->destroy = sw_perf_counter_destroy;
+ }
pmu = &perf_ops_generic;
break;
}
@@ -3556,6 +3999,7 @@
int cpu,
struct perf_counter_context *ctx,
struct perf_counter *group_leader,
+ struct perf_counter *parent_counter,
gfp_t gfpflags)
{
const struct pmu *pmu;
@@ -3591,6 +4035,8 @@
counter->ctx = ctx;
counter->oncpu = -1;
+ counter->parent = parent_counter;
+
counter->ns = get_pid_ns(current->nsproxy->pid_ns);
counter->id = atomic64_inc_return(&perf_counter_id);
@@ -3609,9 +4055,9 @@
atomic64_set(&hwc->period_left, hwc->sample_period);
/*
- * we currently do not support PERF_SAMPLE_GROUP on inherited counters
+ * we currently do not support PERF_FORMAT_GROUP on inherited counters
*/
- if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP))
+ if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP))
goto done;
switch (attr->type) {
@@ -3648,11 +4094,15 @@
counter->pmu = pmu;
- atomic_inc(&nr_counters);
- if (counter->attr.mmap)
- atomic_inc(&nr_mmap_counters);
- if (counter->attr.comm)
- atomic_inc(&nr_comm_counters);
+ if (!counter->parent) {
+ atomic_inc(&nr_counters);
+ if (counter->attr.mmap)
+ atomic_inc(&nr_mmap_counters);
+ if (counter->attr.comm)
+ atomic_inc(&nr_comm_counters);
+ if (counter->attr.task)
+ atomic_inc(&nr_task_counters);
+ }
return counter;
}
@@ -3815,7 +4265,7 @@
}
counter = perf_counter_alloc(&attr, cpu, ctx, group_leader,
- GFP_KERNEL);
+ NULL, GFP_KERNEL);
ret = PTR_ERR(counter);
if (IS_ERR(counter))
goto err_put_context;
@@ -3881,7 +4331,8 @@
child_counter = perf_counter_alloc(&parent_counter->attr,
parent_counter->cpu, child_ctx,
- group_leader, GFP_KERNEL);
+ group_leader, parent_counter,
+ GFP_KERNEL);
if (IS_ERR(child_counter))
return child_counter;
get_ctx(child_ctx);
@@ -3904,12 +4355,6 @@
*/
add_counter_to_ctx(child_counter, child_ctx);
- child_counter->parent = parent_counter;
- /*
- * inherit into child's child as well:
- */
- child_counter->attr.inherit = 1;
-
/*
* Get a reference to the parent filp - we will fput it
* when the child counter exits. This is safe to do because
@@ -3953,10 +4398,14 @@
}
static void sync_child_counter(struct perf_counter *child_counter,
- struct perf_counter *parent_counter)
+ struct task_struct *child)
{
+ struct perf_counter *parent_counter = child_counter->parent;
u64 child_val;
+ if (child_counter->attr.inherit_stat)
+ perf_counter_read_event(child_counter, child);
+
child_val = atomic64_read(&child_counter->count);
/*
@@ -3985,7 +4434,8 @@
static void
__perf_counter_exit_task(struct perf_counter *child_counter,
- struct perf_counter_context *child_ctx)
+ struct perf_counter_context *child_ctx,
+ struct task_struct *child)
{
struct perf_counter *parent_counter;
@@ -3999,7 +4449,7 @@
* counters need to be zapped - but otherwise linger.
*/
if (parent_counter) {
- sync_child_counter(child_counter, parent_counter);
+ sync_child_counter(child_counter, child);
free_counter(child_counter);
}
}
@@ -4013,8 +4463,10 @@
struct perf_counter_context *child_ctx;
unsigned long flags;
- if (likely(!child->perf_counter_ctxp))
+ if (likely(!child->perf_counter_ctxp)) {
+ perf_counter_task(child, NULL, 0);
return;
+ }
local_irq_save(flags);
/*
@@ -4033,17 +4485,20 @@
*/
spin_lock(&child_ctx->lock);
child->perf_counter_ctxp = NULL;
- if (child_ctx->parent_ctx) {
- /*
- * This context is a clone; unclone it so it can't get
- * swapped to another process while we're removing all
- * the counters from it.
- */
- put_ctx(child_ctx->parent_ctx);
- child_ctx->parent_ctx = NULL;
- }
- spin_unlock(&child_ctx->lock);
- local_irq_restore(flags);
+ /*
+ * If this context is a clone; unclone it so it can't get
+ * swapped to another process while we're removing all
+ * the counters from it.
+ */
+ unclone_ctx(child_ctx);
+ spin_unlock_irqrestore(&child_ctx->lock, flags);
+
+ /*
+ * Report the task dead after unscheduling the counters so that we
+ * won't get any samples after PERF_EVENT_EXIT. We can however still
+ * get a few PERF_EVENT_READ events.
+ */
+ perf_counter_task(child, child_ctx, 0);
/*
* We can recurse on the same lock type through:
@@ -4061,7 +4516,7 @@
again:
list_for_each_entry_safe(child_counter, tmp, &child_ctx->counter_list,
list_entry)
- __perf_counter_exit_task(child_counter, child_ctx);
+ __perf_counter_exit_task(child_counter, child_ctx, child);
/*
* If the last counter was a group counter, it will have appended all
@@ -4264,6 +4719,11 @@
perf_counter_init_cpu(cpu);
break;
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ hw_perf_counter_setup_online(cpu);
+ break;
+
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
perf_counter_exit_cpu(cpu);
@@ -4288,6 +4748,8 @@
{
perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_UP_PREPARE,
(void *)(long)smp_processor_id());
+ perf_cpu_notify(&perf_cpu_nb, (unsigned long)CPU_ONLINE,
+ (void *)(long)smp_processor_id());
register_cpu_notifier(&perf_cpu_nb);
}
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index bece7c0..e33a21c 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -521,11 +521,12 @@
}
void posix_cpu_timers_exit_group(struct task_struct *tsk)
{
- struct task_cputime cputime;
+ struct signal_struct *const sig = tsk->signal;
- thread_group_cputimer(tsk, &cputime);
cleanup_timers(tsk->signal->cpu_timers,
- cputime.utime, cputime.stime, cputime.sum_exec_runtime);
+ cputime_add(tsk->utime, sig->utime),
+ cputime_add(tsk->stime, sig->stime),
+ tsk->se.sum_exec_runtime + sig->sum_sched_runtime);
}
static void clear_dead_task(struct k_itimer *timer, union cpu_time_count now)
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 052ec4d..d089d05 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -202,6 +202,12 @@
return -EOPNOTSUPP;
}
+static int no_nsleep(const clockid_t which_clock, int flags,
+ struct timespec *tsave, struct timespec __user *rmtp)
+{
+ return -EOPNOTSUPP;
+}
+
/*
* Return nonzero if we know a priori this clockid_t value is bogus.
*/
@@ -254,6 +260,7 @@
.clock_get = posix_get_monotonic_raw,
.clock_set = do_posix_clock_nosettime,
.timer_create = no_timer_create,
+ .nsleep = no_nsleep,
};
register_posix_clock(CLOCK_REALTIME, &clock_realtime);
diff --git a/kernel/power/user.c b/kernel/power/user.c
index ed97375..bf0014d 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -23,7 +23,6 @@
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
-#include <linux/smp_lock.h>
#include <scsi/scsi_scan.h>
#include <asm/uaccess.h>
diff --git a/kernel/profile.c b/kernel/profile.c
index 69911b5..419250e 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -117,11 +117,12 @@
cpumask_copy(prof_cpu_mask, cpu_possible_mask);
- prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL);
+ prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN);
if (prof_buffer)
return 0;
- prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO);
+ prof_buffer = alloc_pages_exact(buffer_bytes,
+ GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
if (prof_buffer)
return 0;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 61c78b2..082c320 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -181,8 +181,8 @@
* interference; SUID, SGID and LSM creds get determined differently
* under ptrace.
*/
- retval = mutex_lock_interruptible(&task->cred_guard_mutex);
- if (retval < 0)
+ retval = -ERESTARTNOINTR;
+ if (mutex_lock_interruptible(&task->cred_guard_mutex))
goto out;
task_lock(task);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 0dccfbb..7717b95 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1533,7 +1533,7 @@
int j;
struct rcu_node *rnp;
- printk(KERN_WARNING "Experimental hierarchical RCU implementation.\n");
+ printk(KERN_INFO "Hierarchical RCU implementation.\n");
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
@@ -1546,7 +1546,6 @@
rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long)i);
/* Register notifier for non-boot CPUs */
register_cpu_notifier(&rcu_nb);
- printk(KERN_WARNING "Experimental hierarchical RCU init done.\n");
}
module_param(blimit, int, 0);
diff --git a/kernel/resource.c b/kernel/resource.c
index ac5f3a3..78b0872 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -787,7 +787,7 @@
static struct resource reserve[MAXRESERVE];
for (;;) {
- int io_start, io_num;
+ unsigned int io_start, io_num;
int x = reserved;
if (get_option (&str, &io_start) != 2)
diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
index fcd107a..29bd4ba 100644
--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -1039,16 +1039,14 @@
if (!rt_mutex_owner(lock) || try_to_steal_lock(lock, task)) {
/* We got the lock for task. */
debug_rt_mutex_lock(lock);
-
rt_mutex_set_owner(lock, task, 0);
-
+ spin_unlock(&lock->wait_lock);
rt_mutex_deadlock_account_lock(lock, task);
return 1;
}
ret = task_blocks_on_rt_mutex(lock, waiter, task, detect_deadlock);
-
if (ret && !waiter->task) {
/*
* Reset the return value. We might have
diff --git a/kernel/sched.c b/kernel/sched.c
index 7c9098d..1b59e26 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -493,6 +493,7 @@
#endif
#ifdef CONFIG_SMP
unsigned long rt_nr_migratory;
+ unsigned long rt_nr_total;
int overloaded;
struct plist_head pushable_tasks;
#endif
@@ -2571,15 +2572,37 @@
p->se.avg_wakeup = sysctl_sched_wakeup_granularity;
#ifdef CONFIG_SCHEDSTATS
- p->se.wait_start = 0;
- p->se.sum_sleep_runtime = 0;
- p->se.sleep_start = 0;
- p->se.block_start = 0;
- p->se.sleep_max = 0;
- p->se.block_max = 0;
- p->se.exec_max = 0;
- p->se.slice_max = 0;
- p->se.wait_max = 0;
+ p->se.wait_start = 0;
+ p->se.wait_max = 0;
+ p->se.wait_count = 0;
+ p->se.wait_sum = 0;
+
+ p->se.sleep_start = 0;
+ p->se.sleep_max = 0;
+ p->se.sum_sleep_runtime = 0;
+
+ p->se.block_start = 0;
+ p->se.block_max = 0;
+ p->se.exec_max = 0;
+ p->se.slice_max = 0;
+
+ p->se.nr_migrations_cold = 0;
+ p->se.nr_failed_migrations_affine = 0;
+ p->se.nr_failed_migrations_running = 0;
+ p->se.nr_failed_migrations_hot = 0;
+ p->se.nr_forced_migrations = 0;
+ p->se.nr_forced2_migrations = 0;
+
+ p->se.nr_wakeups = 0;
+ p->se.nr_wakeups_sync = 0;
+ p->se.nr_wakeups_migrate = 0;
+ p->se.nr_wakeups_local = 0;
+ p->se.nr_wakeups_remote = 0;
+ p->se.nr_wakeups_affine = 0;
+ p->se.nr_wakeups_affine_attempts = 0;
+ p->se.nr_wakeups_passive = 0;
+ p->se.nr_wakeups_idle = 0;
+
#endif
INIT_LIST_HEAD(&p->rt.run_list);
@@ -6541,6 +6564,11 @@
return 0;
}
+static inline int should_resched(void)
+{
+ return need_resched() && !(preempt_count() & PREEMPT_ACTIVE);
+}
+
static void __cond_resched(void)
{
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
@@ -6560,8 +6588,7 @@
int __sched _cond_resched(void)
{
- if (need_resched() && !(preempt_count() & PREEMPT_ACTIVE) &&
- system_state == SYSTEM_RUNNING) {
+ if (should_resched()) {
__cond_resched();
return 1;
}
@@ -6579,12 +6606,12 @@
*/
int cond_resched_lock(spinlock_t *lock)
{
- int resched = need_resched() && system_state == SYSTEM_RUNNING;
+ int resched = should_resched();
int ret = 0;
if (spin_needbreak(lock) || resched) {
spin_unlock(lock);
- if (resched && need_resched())
+ if (resched)
__cond_resched();
else
cpu_relax();
@@ -6599,7 +6626,7 @@
{
BUG_ON(!in_softirq());
- if (need_resched() && system_state == SYSTEM_RUNNING) {
+ if (should_resched()) {
local_bh_enable();
__cond_resched();
local_bh_disable();
@@ -7262,6 +7289,7 @@
static void calc_global_load_remove(struct rq *rq)
{
atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+ rq->calc_load_active = 0;
}
#endif /* CONFIG_HOTPLUG_CPU */
@@ -7488,6 +7516,7 @@
task_rq_unlock(rq, &flags);
get_task_struct(p);
cpu_rq(cpu)->migration_thread = p;
+ rq->calc_load_update = calc_load_update;
break;
case CPU_ONLINE:
@@ -7498,8 +7527,6 @@
/* Update our root-domain */
rq = cpu_rq(cpu);
spin_lock_irqsave(&rq->lock, flags);
- rq->calc_load_update = calc_load_update;
- rq->calc_load_active = 0;
if (rq->rd) {
BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
@@ -9070,7 +9097,7 @@
#ifdef CONFIG_SMP
rt_rq->rt_nr_migratory = 0;
rt_rq->overloaded = 0;
- plist_head_init(&rq->rt.pushable_tasks, &rq->lock);
+ plist_head_init(&rt_rq->pushable_tasks, &rq->lock);
#endif
rt_rq->rt_time = 0;
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index e6c2517..d014efb 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -81,8 +81,21 @@
if (cpumask_any_and(&p->cpus_allowed, vec->mask) >= nr_cpu_ids)
continue;
- if (lowest_mask)
+ if (lowest_mask) {
cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask);
+
+ /*
+ * We have to ensure that we have at least one bit
+ * still set in the array, since the map could have
+ * been concurrently emptied between the first and
+ * second reads of vec->mask. If we hit this
+ * condition, simply act as though we never hit this
+ * priority level and continue on.
+ */
+ if (cpumask_any(lowest_mask) >= nr_cpu_ids)
+ continue;
+ }
+
return 1;
}
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index ba7fd6e..652e8bd 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -266,6 +266,12 @@
return min_vruntime;
}
+static inline int entity_before(struct sched_entity *a,
+ struct sched_entity *b)
+{
+ return (s64)(a->vruntime - b->vruntime) < 0;
+}
+
static inline s64 entity_key(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
return se->vruntime - cfs_rq->min_vruntime;
@@ -605,9 +611,13 @@
static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
#ifdef CONFIG_SCHEDSTATS
+ struct task_struct *tsk = NULL;
+
+ if (entity_is_task(se))
+ tsk = task_of(se);
+
if (se->sleep_start) {
u64 delta = rq_of(cfs_rq)->clock - se->sleep_start;
- struct task_struct *tsk = task_of(se);
if ((s64)delta < 0)
delta = 0;
@@ -618,11 +628,11 @@
se->sleep_start = 0;
se->sum_sleep_runtime += delta;
- account_scheduler_latency(tsk, delta >> 10, 1);
+ if (tsk)
+ account_scheduler_latency(tsk, delta >> 10, 1);
}
if (se->block_start) {
u64 delta = rq_of(cfs_rq)->clock - se->block_start;
- struct task_struct *tsk = task_of(se);
if ((s64)delta < 0)
delta = 0;
@@ -633,17 +643,19 @@
se->block_start = 0;
se->sum_sleep_runtime += delta;
- /*
- * Blocking time is in units of nanosecs, so shift by 20 to
- * get a milliseconds-range estimation of the amount of
- * time that the task spent sleeping:
- */
- if (unlikely(prof_on == SLEEP_PROFILING)) {
-
- profile_hits(SLEEP_PROFILING, (void *)get_wchan(tsk),
- delta >> 20);
+ if (tsk) {
+ /*
+ * Blocking time is in units of nanosecs, so shift by
+ * 20 to get a milliseconds-range estimation of the
+ * amount of time that the task spent sleeping:
+ */
+ if (unlikely(prof_on == SLEEP_PROFILING)) {
+ profile_hits(SLEEP_PROFILING,
+ (void *)get_wchan(tsk),
+ delta >> 20);
+ }
+ account_scheduler_latency(tsk, delta >> 10, 0);
}
- account_scheduler_latency(tsk, delta >> 10, 0);
}
#endif
}
@@ -687,7 +699,8 @@
* all of which have the same weight.
*/
if (sched_feat(NORMALIZED_SLEEPER) &&
- task_of(se)->policy != SCHED_IDLE)
+ (!entity_is_task(se) ||
+ task_of(se)->policy != SCHED_IDLE))
thresh = calc_delta_fair(thresh, se);
vruntime -= thresh;
@@ -1016,7 +1029,7 @@
/*
* Already in the rightmost position?
*/
- if (unlikely(!rightmost || rightmost->vruntime < se->vruntime))
+ if (unlikely(!rightmost || entity_before(rightmost, se)))
return;
/*
@@ -1712,7 +1725,7 @@
/* 'curr' will be NULL if the child belongs to a different group */
if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) &&
- curr && curr->vruntime < se->vruntime) {
+ curr && entity_before(curr, se)) {
/*
* Upon rescheduling, sched_class::put_prev_task() will place
* 'current' within the tree based on its new key value.
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 9bf0d2a..3918e01 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -10,6 +10,8 @@
#ifdef CONFIG_RT_GROUP_SCHED
+#define rt_entity_is_task(rt_se) (!(rt_se)->my_q)
+
static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
{
return rt_rq->rq;
@@ -22,6 +24,8 @@
#else /* CONFIG_RT_GROUP_SCHED */
+#define rt_entity_is_task(rt_se) (1)
+
static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
{
return container_of(rt_rq, struct rq, rt);
@@ -73,7 +77,7 @@
static void update_rt_migration(struct rt_rq *rt_rq)
{
- if (rt_rq->rt_nr_migratory && (rt_rq->rt_nr_running > 1)) {
+ if (rt_rq->rt_nr_migratory && rt_rq->rt_nr_total > 1) {
if (!rt_rq->overloaded) {
rt_set_overload(rq_of_rt_rq(rt_rq));
rt_rq->overloaded = 1;
@@ -86,6 +90,12 @@
static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
+ if (!rt_entity_is_task(rt_se))
+ return;
+
+ rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+ rt_rq->rt_nr_total++;
if (rt_se->nr_cpus_allowed > 1)
rt_rq->rt_nr_migratory++;
@@ -94,6 +104,12 @@
static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
{
+ if (!rt_entity_is_task(rt_se))
+ return;
+
+ rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+ rt_rq->rt_nr_total--;
if (rt_se->nr_cpus_allowed > 1)
rt_rq->rt_nr_migratory--;
diff --git a/kernel/signal.c b/kernel/signal.c
index ccf1cee..64c5dee 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2454,11 +2454,9 @@
stack_t oss;
int error;
- if (uoss) {
- oss.ss_sp = (void __user *) current->sas_ss_sp;
- oss.ss_size = current->sas_ss_size;
- oss.ss_flags = sas_ss_flags(sp);
- }
+ oss.ss_sp = (void __user *) current->sas_ss_sp;
+ oss.ss_size = current->sas_ss_size;
+ oss.ss_flags = sas_ss_flags(sp);
if (uss) {
void __user *ss_sp;
@@ -2466,10 +2464,12 @@
int ss_flags;
error = -EFAULT;
- if (!access_ok(VERIFY_READ, uss, sizeof(*uss))
- || __get_user(ss_sp, &uss->ss_sp)
- || __get_user(ss_flags, &uss->ss_flags)
- || __get_user(ss_size, &uss->ss_size))
+ if (!access_ok(VERIFY_READ, uss, sizeof(*uss)))
+ goto out;
+ error = __get_user(ss_sp, &uss->ss_sp) |
+ __get_user(ss_flags, &uss->ss_flags) |
+ __get_user(ss_size, &uss->ss_size);
+ if (error)
goto out;
error = -EPERM;
@@ -2501,13 +2501,16 @@
current->sas_ss_size = ss_size;
}
+ error = 0;
if (uoss) {
error = -EFAULT;
- if (copy_to_user(uoss, &oss, sizeof(oss)))
+ if (!access_ok(VERIFY_WRITE, uoss, sizeof(*uoss)))
goto out;
+ error = __put_user(oss.ss_sp, &uoss->ss_sp) |
+ __put_user(oss.ss_size, &uoss->ss_size) |
+ __put_user(oss.ss_flags, &uoss->ss_flags);
}
- error = 0;
out:
return error;
}
diff --git a/kernel/smp.c b/kernel/smp.c
index ad63d85..94188b8 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -57,7 +57,7 @@
return NOTIFY_BAD;
break;
-#ifdef CONFIG_CPU_HOTPLUG
+#ifdef CONFIG_HOTPLUG_CPU
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 3a94905..eb5e131 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -345,7 +345,9 @@
softirq_vec[nr].action = action;
}
-/* Tasklets */
+/*
+ * Tasklets
+ */
struct tasklet_head
{
struct tasklet_struct *head;
@@ -493,6 +495,66 @@
EXPORT_SYMBOL(tasklet_kill);
+/*
+ * tasklet_hrtimer
+ */
+
+/*
+ * The trampoline is called when the hrtimer expires. If this is
+ * called from the hrtimer interrupt then we schedule the tasklet as
+ * the timer callback function expects to run in softirq context. If
+ * it's called in softirq context anyway (i.e. high resolution timers
+ * disabled) then the hrtimer callback is called right away.
+ */
+static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
+{
+ struct tasklet_hrtimer *ttimer =
+ container_of(timer, struct tasklet_hrtimer, timer);
+
+ if (hrtimer_is_hres_active(timer)) {
+ tasklet_hi_schedule(&ttimer->tasklet);
+ return HRTIMER_NORESTART;
+ }
+ return ttimer->function(timer);
+}
+
+/*
+ * Helper function which calls the hrtimer callback from
+ * tasklet/softirq context
+ */
+static void __tasklet_hrtimer_trampoline(unsigned long data)
+{
+ struct tasklet_hrtimer *ttimer = (void *)data;
+ enum hrtimer_restart restart;
+
+ restart = ttimer->function(&ttimer->timer);
+ if (restart != HRTIMER_NORESTART)
+ hrtimer_restart(&ttimer->timer);
+}
+
+/**
+ * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks
+ * @ttimer: tasklet_hrtimer which is initialized
+ * @function: hrtimer callback funtion which gets called from softirq context
+ * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME)
+ * @mode: hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL)
+ */
+void tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+ enum hrtimer_restart (*function)(struct hrtimer *),
+ clockid_t which_clock, enum hrtimer_mode mode)
+{
+ hrtimer_init(&ttimer->timer, which_clock, mode);
+ ttimer->timer.function = __hrtimer_tasklet_trampoline;
+ tasklet_init(&ttimer->tasklet, __tasklet_hrtimer_trampoline,
+ (unsigned long)ttimer);
+ ttimer->function = function;
+}
+EXPORT_SYMBOL_GPL(tasklet_hrtimer_init);
+
+/*
+ * Remote softirq bits
+ */
+
DEFINE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
EXPORT_PER_CPU_SYMBOL(softirq_work_list);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 62e4ff9..98e0232 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -335,7 +335,10 @@
.data = &sysctl_timer_migration,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &one,
},
#endif
{
@@ -744,6 +747,14 @@
.proc_handler = &proc_dointvec,
},
{
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "panic_on_io_nmi",
+ .data = &panic_on_io_nmi,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
+ {
.ctl_name = KERN_BOOTLOADER_TYPE,
.procname = "bootloader_type",
.data = &bootloader_type,
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 1ad6dd4..a6dcd67 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -254,15 +254,4 @@
spin_unlock(&clockevents_lock);
}
EXPORT_SYMBOL_GPL(clockevents_notify);
-
-ktime_t clockevents_get_next_event(int cpu)
-{
- struct tick_device *td;
- struct clock_event_device *dev;
-
- td = &per_cpu(tick_cpu_device, cpu);
- dev = td->evtdev;
-
- return dev->next_event;
-}
#endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 592bf58..7466cb8 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -513,7 +513,7 @@
* Check to make sure we don't switch to a non-highres capable
* clocksource if the tick code is in oneshot mode (highres or nohz)
*/
- if (tick_oneshot_mode_active() &&
+ if (tick_oneshot_mode_active() && ovr &&
!(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
printk(KERN_WARNING "%s clocksource is not HRT compatible. "
"Cannot switch while in HRT/NOHZ mode\n", ovr->name);
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index c994530..4cde8b9 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -96,7 +96,7 @@
/*
* Collection status, active/inactive:
*/
-static int __read_mostly active;
+int __read_mostly timer_stats_active;
/*
* Beginning/end timestamps of measurement:
@@ -242,7 +242,7 @@
struct entry *entry, input;
unsigned long flags;
- if (likely(!active))
+ if (likely(!timer_stats_active))
return;
lock = &per_cpu(lookup_lock, raw_smp_processor_id());
@@ -254,7 +254,7 @@
input.timer_flag = timer_flag;
spin_lock_irqsave(lock, flags);
- if (!active)
+ if (!timer_stats_active)
goto out_unlock;
entry = tstat_lookup(&input, comm);
@@ -290,7 +290,7 @@
/*
* If still active then calculate up to now:
*/
- if (active)
+ if (timer_stats_active)
time_stop = ktime_get();
time = ktime_sub(time_stop, time_start);
@@ -368,18 +368,18 @@
mutex_lock(&show_mutex);
switch (ctl[0]) {
case '0':
- if (active) {
- active = 0;
+ if (timer_stats_active) {
+ timer_stats_active = 0;
time_stop = ktime_get();
sync_access();
}
break;
case '1':
- if (!active) {
+ if (!timer_stats_active) {
reset_entries();
time_start = ktime_get();
smp_mb();
- active = 1;
+ timer_stats_active = 1;
}
break;
default:
diff --git a/kernel/timer.c b/kernel/timer.c
index 54d3912..a7f07d5 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -380,6 +380,8 @@
{
unsigned int flag = 0;
+ if (likely(!timer->start_site))
+ return;
if (unlikely(tbase_get_deferrable(timer->base)))
flag |= TIMER_STATS_FLAG_DEFERRABLE;
@@ -712,7 +714,7 @@
* networking code - if the timer is re-modified
* to be the same thing then just return:
*/
- if (timer->expires == expires && timer_pending(timer))
+ if (timer_pending(timer) && timer->expires == expires)
return 1;
return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 1551f47..019f380 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -226,13 +226,13 @@
the timings of the initcalls and traces key events and the identity
of tasks that can cause boot delays, such as context-switches.
- Its aim is to be parsed by the /scripts/bootgraph.pl tool to
+ Its aim is to be parsed by the scripts/bootgraph.pl tool to
produce pretty graphics about boot inefficiencies, giving a visual
representation of the delays during initcalls - but the raw
/debug/tracing/trace text output is readable too.
- You must pass in ftrace=initcall to the kernel command line
- to enable this on bootup.
+ You must pass in initcall_debug and ftrace=initcall to the kernel
+ command line to enable this on bootup.
config TRACE_BRANCH_PROFILING
bool
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 39af8af..7a34cb5 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/debugfs.h>
+#include <linux/smp_lock.h>
#include <linux/time.h>
#include <linux/uaccess.h>
@@ -266,8 +267,8 @@
{
debugfs_remove(bt->msg_file);
debugfs_remove(bt->dropped_file);
- debugfs_remove(bt->dir);
relay_close(bt->rchan);
+ debugfs_remove(bt->dir);
free_percpu(bt->sequence);
free_percpu(bt->msg_data);
kfree(bt);
@@ -377,18 +378,8 @@
static int blk_remove_buf_file_callback(struct dentry *dentry)
{
- struct dentry *parent = dentry->d_parent;
debugfs_remove(dentry);
- /*
- * this will fail for all but the last file, but that is ok. what we
- * care about is the top level buts->name directory going away, when
- * the last trace file is gone. Then we don't have to rmdir() that
- * manually on trace stop, so it nicely solves the issue with
- * force killing of running traces.
- */
-
- debugfs_remove(parent);
return 0;
}
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 3718d55..1e1d23c 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -291,7 +291,9 @@
pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK);
again:
- rec++;
+ if (idx != 0)
+ rec++;
+
if ((void *)rec >= (void *)&pg->records[pg->index]) {
pg = pg->next;
if (!pg)
@@ -766,7 +768,7 @@
.stat_show = function_stat_show
};
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
{
struct ftrace_profile_stat *stat;
struct dentry *entry;
@@ -784,7 +786,6 @@
* The files created are permanent, if something happens
* we still do not free memory.
*/
- kfree(stat);
WARN(1,
"Could not allocate stat file for cpu %d\n",
cpu);
@@ -811,7 +812,7 @@
}
#else /* CONFIG_FUNCTION_PROFILER */
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
{
}
#endif /* CONFIG_FUNCTION_PROFILER */
@@ -1417,10 +1418,20 @@
{
struct ftrace_iterator *iter = m->private;
void *p = NULL;
+ loff_t l;
+
+ if (!(iter->flags & FTRACE_ITER_HASH))
+ *pos = 0;
iter->flags |= FTRACE_ITER_HASH;
- return t_hash_next(m, p, pos);
+ iter->hidx = 0;
+ for (l = 0; l <= *pos; ) {
+ p = t_hash_next(m, p, &l);
+ if (!p)
+ break;
+ }
+ return p;
}
static int t_hash_show(struct seq_file *m, void *v)
@@ -1467,8 +1478,6 @@
iter->pg = iter->pg->next;
iter->idx = 0;
goto retry;
- } else {
- iter->idx = -1;
}
} else {
rec = &iter->pg->records[iter->idx++];
@@ -1497,6 +1506,7 @@
{
struct ftrace_iterator *iter = m->private;
void *p = NULL;
+ loff_t l;
mutex_lock(&ftrace_lock);
/*
@@ -1508,23 +1518,21 @@
if (*pos > 0)
return t_hash_start(m, pos);
iter->flags |= FTRACE_ITER_PRINTALL;
- (*pos)++;
return iter;
}
if (iter->flags & FTRACE_ITER_HASH)
return t_hash_start(m, pos);
- if (*pos > 0) {
- if (iter->idx < 0)
- return p;
- (*pos)--;
- iter->idx--;
+ iter->pg = ftrace_pages_start;
+ iter->idx = 0;
+ for (l = 0; l <= *pos; ) {
+ p = t_next(m, p, &l);
+ if (!p)
+ break;
}
- p = t_next(m, p, pos);
-
- if (!p)
+ if (!p && iter->flags & FTRACE_ITER_FILTER)
return t_hash_start(m, pos);
return p;
@@ -1654,7 +1662,7 @@
mutex_lock(&ftrace_regex_lock);
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND))
+ (file->f_flags & O_TRUNC))
ftrace_filter_reset(enable);
if (file->f_mode & FMODE_READ) {
@@ -2500,32 +2508,31 @@
unsigned long ftrace_graph_funcs[FTRACE_GRAPH_MAX_FUNCS] __read_mostly;
static void *
-g_next(struct seq_file *m, void *v, loff_t *pos)
+__g_next(struct seq_file *m, loff_t *pos)
{
unsigned long *array = m->private;
- int index = *pos;
- (*pos)++;
-
- if (index >= ftrace_graph_count)
+ if (*pos >= ftrace_graph_count)
return NULL;
+ return &array[*pos];
+}
- return &array[index];
+static void *
+g_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return __g_next(m, pos);
}
static void *g_start(struct seq_file *m, loff_t *pos)
{
- void *p = NULL;
-
mutex_lock(&graph_lock);
/* Nothing, tell g_show to print all functions are enabled */
if (!ftrace_graph_count && !*pos)
return (void *)1;
- p = g_next(m, p, pos);
-
- return p;
+ return __g_next(m, pos);
}
static void g_stop(struct seq_file *m, void *p)
@@ -2570,7 +2577,7 @@
mutex_lock(&graph_lock);
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND)) {
+ (file->f_flags & O_TRUNC)) {
ftrace_graph_count = 0;
memset(ftrace_graph_funcs, 0, sizeof(ftrace_graph_funcs));
}
@@ -2589,6 +2596,14 @@
}
static int
+ftrace_graph_release(struct inode *inode, struct file *file)
+{
+ if (file->f_mode & FMODE_READ)
+ seq_release(inode, file);
+ return 0;
+}
+
+static int
ftrace_set_func(unsigned long *array, int *idx, char *buffer)
{
struct dyn_ftrace *rec;
@@ -2717,9 +2732,10 @@
}
static const struct file_operations ftrace_graph_fops = {
- .open = ftrace_graph_open,
- .read = seq_read,
- .write = ftrace_graph_write,
+ .open = ftrace_graph_open,
+ .read = seq_read,
+ .write = ftrace_graph_write,
+ .release = ftrace_graph_release,
};
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
@@ -3152,10 +3168,10 @@
ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
- if (ret || !write || (last_ftrace_enabled == ftrace_enabled))
+ if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
goto out;
- last_ftrace_enabled = ftrace_enabled;
+ last_ftrace_enabled = !!ftrace_enabled;
if (ftrace_enabled) {
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 04dac26..a330513 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -735,6 +735,7 @@
put_online_cpus();
+ kfree(buffer->buffers);
free_cpumask_var(buffer->cpumask);
kfree(buffer);
@@ -1563,6 +1564,8 @@
return NULL;
}
+#ifdef CONFIG_TRACING
+
#define TRACE_RECURSIVE_DEPTH 16
static int trace_recursive_lock(void)
@@ -1593,6 +1596,13 @@
current->trace_recursion--;
}
+#else
+
+#define trace_recursive_lock() (0)
+#define trace_recursive_unlock() do { } while (0)
+
+#endif
+
static DEFINE_PER_CPU(int, rb_need_resched);
/**
@@ -1776,7 +1786,7 @@
*/
RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing));
- if (!rb_try_to_discard(cpu_buffer, event))
+ if (rb_try_to_discard(cpu_buffer, event))
goto out;
/*
@@ -2374,7 +2384,6 @@
* the box. Return the padding, and we will release
* the current locks, and try again.
*/
- rb_advance_reader(cpu_buffer);
return event;
case RINGBUF_TYPE_TIME_EXTEND:
@@ -2477,7 +2486,7 @@
* buffer too. A one time deal is all you get from reading
* the ring buffer from an NMI.
*/
- if (likely(!in_nmi() && !oops_in_progress))
+ if (likely(!in_nmi()))
return 1;
tracing_off_permanent();
@@ -2510,6 +2519,8 @@
if (dolock)
spin_lock(&cpu_buffer->reader_lock);
event = rb_buffer_peek(buffer, cpu, ts);
+ if (event && event->type_len == RINGBUF_TYPE_PADDING)
+ rb_advance_reader(cpu_buffer);
if (dolock)
spin_unlock(&cpu_buffer->reader_lock);
local_irq_restore(flags);
@@ -2581,12 +2592,9 @@
spin_lock(&cpu_buffer->reader_lock);
event = rb_buffer_peek(buffer, cpu, ts);
- if (!event)
- goto out_unlock;
+ if (event)
+ rb_advance_reader(cpu_buffer);
- rb_advance_reader(cpu_buffer);
-
- out_unlock:
if (dolock)
spin_unlock(&cpu_buffer->reader_lock);
local_irq_restore(flags);
@@ -3104,6 +3112,7 @@
}
EXPORT_SYMBOL_GPL(ring_buffer_read_page);
+#ifdef CONFIG_TRACING
static ssize_t
rb_simple_read(struct file *filp, char __user *ubuf,
size_t cnt, loff_t *ppos)
@@ -3171,6 +3180,7 @@
}
fs_initcall(rb_init_debugfs);
+#endif
#ifdef CONFIG_HOTPLUG_CPU
static int rb_cpu_notify(struct notifier_block *self,
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 076fa6f..c22b40f 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -17,6 +17,7 @@
#include <linux/writeback.h>
#include <linux/kallsyms.h>
#include <linux/seq_file.h>
+#include <linux/smp_lock.h>
#include <linux/notifier.h>
#include <linux/irqflags.h>
#include <linux/debugfs.h>
@@ -284,13 +285,12 @@
static int __init set_buf_size(char *str)
{
unsigned long buf_size;
- int ret;
if (!str)
return 0;
- ret = strict_strtoul(str, 0, &buf_size);
+ buf_size = memparse(str, &str);
/* nr_entries can not be zero */
- if (ret < 0 || buf_size == 0)
+ if (buf_size == 0)
return 0;
trace_buf_size = buf_size;
return 1;
@@ -848,6 +848,7 @@
((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) |
(need_resched() ? TRACE_FLAG_NEED_RESCHED : 0);
}
+EXPORT_SYMBOL_GPL(tracing_generic_entry_update);
struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
int type,
@@ -2031,7 +2032,7 @@
/* If this file was open for write, then erase contents */
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND)) {
+ (file->f_flags & O_TRUNC)) {
long cpu = (long) inode->i_private;
if (cpu == TRACE_PIPE_ALL_CPU)
@@ -2053,25 +2054,23 @@
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct tracer *t = m->private;
+ struct tracer *t = v;
(*pos)++;
if (t)
t = t->next;
- m->private = t;
-
return t;
}
static void *t_start(struct seq_file *m, loff_t *pos)
{
- struct tracer *t = m->private;
+ struct tracer *t;
loff_t l = 0;
mutex_lock(&trace_types_lock);
- for (; t && l < *pos; t = t_next(m, t, &l))
+ for (t = trace_types; t && l < *pos; t = t_next(m, t, &l))
;
return t;
@@ -2107,18 +2106,10 @@
static int show_traces_open(struct inode *inode, struct file *file)
{
- int ret;
-
if (tracing_disabled)
return -ENODEV;
- ret = seq_open(file, &show_traces_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = trace_types;
- }
-
- return ret;
+ return seq_open(file, &show_traces_seq_ops);
}
static ssize_t
@@ -3095,7 +3086,8 @@
break;
}
- trace_consume(iter);
+ if (ret != TRACE_TYPE_NO_CONSUME)
+ trace_consume(iter);
rem -= count;
if (!find_next_entry_inc(iter)) {
rem = 0;
@@ -4243,8 +4235,11 @@
iter.pos = -1;
if (find_next_entry_inc(&iter) != NULL) {
- print_trace_line(&iter);
- trace_consume(&iter);
+ int ret;
+
+ ret = print_trace_line(&iter);
+ if (ret != TRACE_TYPE_NO_CONSUME)
+ trace_consume(&iter);
}
trace_printk_seq(&iter.seq);
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 6e735d4..8b9f4f6 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -438,10 +438,6 @@
struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
int *ent_cpu, u64 *ent_ts);
-void tracing_generic_entry_update(struct trace_entry *entry,
- unsigned long flags,
- int pc);
-
void default_wait_pipe(struct trace_iterator *iter);
void poll_wait_pipe(struct trace_iterator *iter);
@@ -597,6 +593,7 @@
extern struct pid *ftrace_pid_trace;
+#ifdef CONFIG_FUNCTION_TRACER
static inline int ftrace_trace_task(struct task_struct *task)
{
if (!ftrace_pid_trace)
@@ -604,6 +601,12 @@
return test_tsk_trace_trace(task);
}
+#else
+static inline int ftrace_trace_task(struct task_struct *task)
+{
+ return 1;
+}
+#endif
/*
* trace_iterator_flags is an enumeration that defines bit
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index 5b5895a..11ba5bb 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -14,7 +14,7 @@
mutex_lock(&event_mutex);
list_for_each_entry(event, &ftrace_events, list) {
- if (event->id == event_id) {
+ if (event->id == event_id && event->profile_enable) {
ret = event->profile_enable(event);
break;
}
diff --git a/kernel/trace/trace_event_types.h b/kernel/trace/trace_event_types.h
index 5e32e37..6db005e 100644
--- a/kernel/trace/trace_event_types.h
+++ b/kernel/trace/trace_event_types.h
@@ -26,6 +26,9 @@
ftrace_graph_ret_entry, ignore,
TRACE_STRUCT(
TRACE_FIELD(unsigned long, ret.func, func)
+ TRACE_FIELD(unsigned long long, ret.calltime, calltime)
+ TRACE_FIELD(unsigned long long, ret.rettime, rettime)
+ TRACE_FIELD(unsigned long, ret.overrun, overrun)
TRACE_FIELD(int, ret.depth, depth)
),
TP_RAW_FMT("<-- %lx (%d)")
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index aa08be6..e75276a 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -300,10 +300,18 @@
static void *t_start(struct seq_file *m, loff_t *pos)
{
+ struct ftrace_event_call *call = NULL;
+ loff_t l;
+
mutex_lock(&event_mutex);
- if (*pos == 0)
- m->private = ftrace_events.next;
- return t_next(m, NULL, pos);
+
+ m->private = ftrace_events.next;
+ for (l = 0; l <= *pos; ) {
+ call = t_next(m, NULL, &l);
+ if (!call)
+ break;
+ }
+ return call;
}
static void *
@@ -332,10 +340,18 @@
static void *s_start(struct seq_file *m, loff_t *pos)
{
+ struct ftrace_event_call *call = NULL;
+ loff_t l;
+
mutex_lock(&event_mutex);
- if (*pos == 0)
- m->private = ftrace_events.next;
- return s_next(m, NULL, pos);
+
+ m->private = ftrace_events.next;
+ for (l = 0; l <= *pos; ) {
+ call = s_next(m, NULL, &l);
+ if (!call)
+ break;
+ }
+ return call;
}
static int t_show(struct seq_file *m, void *v)
@@ -360,7 +376,7 @@
const struct seq_operations *seq_ops;
if ((file->f_mode & FMODE_WRITE) &&
- !(file->f_flags & O_APPEND))
+ (file->f_flags & O_TRUNC))
ftrace_clear_events();
seq_ops = inode->i_private;
@@ -924,7 +940,7 @@
entry = trace_create_file("enable", 0644, call->dir, call,
enable);
- if (call->id)
+ if (call->id && call->profile_enable)
entry = trace_create_file("id", 0444, call->dir, call,
id);
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 936c621..f32dc9d 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -624,9 +624,6 @@
return -ENOSPC;
}
- filter->preds[filter->n_preds] = pred;
- filter->n_preds++;
-
list_for_each_entry(call, &ftrace_events, list) {
if (!call->define_fields)
@@ -643,6 +640,9 @@
}
replace_filter_string(call->filter, filter_string);
}
+
+ filter->preds[filter->n_preds] = pred;
+ filter->n_preds++;
out:
return err;
}
@@ -1029,12 +1029,17 @@
if (elt->op == OP_AND || elt->op == OP_OR) {
pred = create_logical_pred(elt->op);
+ if (!pred)
+ return -ENOMEM;
if (call) {
err = filter_add_pred(ps, call, pred);
filter_free_pred(pred);
- } else
+ } else {
err = filter_add_subsystem_pred(ps, system,
pred, filter_string);
+ if (err)
+ filter_free_pred(pred);
+ }
if (err)
return err;
@@ -1048,12 +1053,17 @@
}
pred = create_pred(elt->op, operand1, operand2);
+ if (!pred)
+ return -ENOMEM;
if (call) {
err = filter_add_pred(ps, call, pred);
filter_free_pred(pred);
- } else
+ } else {
err = filter_add_subsystem_pred(ps, system, pred,
filter_string);
+ if (err)
+ filter_free_pred(pred);
+ }
if (err)
return err;
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 90f1347..75ef000 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -302,8 +302,7 @@
if (count == -1)
seq_printf(m, ":unlimited\n");
else
- seq_printf(m, ":count=%ld", count);
- seq_putc(m, '\n');
+ seq_printf(m, ":count=%ld\n", count);
return 0;
}
@@ -364,7 +363,7 @@
out_reg:
ret = register_ftrace_function_probe(glob, ops, count);
- return ret;
+ return ret < 0 ? ret : 0;
}
static struct ftrace_func_command ftrace_traceon_cmd = {
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index d2249ab..420ec34 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -843,9 +843,16 @@
switch (entry->type) {
case TRACE_GRAPH_ENT: {
- struct ftrace_graph_ent_entry *field;
+ /*
+ * print_graph_entry() may consume the current event,
+ * thus @field may become invalid, so we need to save it.
+ * sizeof(struct ftrace_graph_ent_entry) is very small,
+ * it can be safely saved at the stack.
+ */
+ struct ftrace_graph_ent_entry *field, saved;
trace_assign_type(field, entry);
- return print_graph_entry(field, s, iter);
+ saved = *field;
+ return print_graph_entry(&saved, s, iter);
}
case TRACE_GRAPH_RET: {
struct ftrace_graph_ret_entry *field;
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 7938f3a..e0c2545 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -27,8 +27,7 @@
{
int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len;
- s->buffer[len] = 0;
- seq_puts(m, s->buffer);
+ seq_write(m, s->buffer, len);
trace_seq_init(s);
}
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index 9bece96..687699d 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -155,25 +155,19 @@
EXPORT_SYMBOL_GPL(__ftrace_vprintk);
static void *
-t_next(struct seq_file *m, void *v, loff_t *pos)
+t_start(struct seq_file *m, loff_t *pos)
{
- const char **fmt = m->private;
- const char **next = fmt;
-
- (*pos)++;
+ const char **fmt = __start___trace_bprintk_fmt + *pos;
if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
return NULL;
-
- next = fmt;
- m->private = ++next;
-
return fmt;
}
-static void *t_start(struct seq_file *m, loff_t *pos)
+static void *t_next(struct seq_file *m, void * v, loff_t *pos)
{
- return t_next(m, NULL, pos);
+ (*pos)++;
+ return t_start(m, pos);
}
static int t_show(struct seq_file *m, void *v)
@@ -182,7 +176,7 @@
const char *str = *fmt;
int i;
- seq_printf(m, "0x%lx : \"", (unsigned long)fmt);
+ seq_printf(m, "0x%lx : \"", *(unsigned long *)fmt);
/*
* Tabs and new lines need to be converted.
@@ -224,15 +218,7 @@
static int
ftrace_formats_open(struct inode *inode, struct file *file)
{
- int ret;
-
- ret = seq_open(file, &show_format_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
-
- m->private = __start___trace_bprintk_fmt;
- }
- return ret;
+ return seq_open(file, &show_format_seq_ops);
}
static const struct file_operations ftrace_formats_fops = {
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 2d7aebd..6a2a9d4 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -301,17 +301,14 @@
static int stack_trace_open(struct inode *inode, struct file *file)
{
- int ret;
-
- ret = seq_open(file, &stack_trace_seq_ops);
-
- return ret;
+ return seq_open(file, &stack_trace_seq_ops);
}
static const struct file_operations stack_trace_fops = {
.open = stack_trace_open,
.read = seq_read,
.llseek = seq_lseek,
+ .release = seq_release,
};
int
@@ -326,10 +323,10 @@
ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
if (ret || !write ||
- (last_stack_tracer_enabled == stack_tracer_enabled))
+ (last_stack_tracer_enabled == !!stack_tracer_enabled))
goto out;
- last_stack_tracer_enabled = stack_tracer_enabled;
+ last_stack_tracer_enabled = !!stack_tracer_enabled;
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index c006437..aea321c 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -73,7 +73,7 @@
}
}
-static void reset_stat_session(struct stat_session *session)
+static void __reset_stat_session(struct stat_session *session)
{
struct rb_node *node = session->stat_root.rb_node;
@@ -83,10 +83,17 @@
session->stat_root = RB_ROOT;
}
+static void reset_stat_session(struct stat_session *session)
+{
+ mutex_lock(&session->stat_mutex);
+ __reset_stat_session(session);
+ mutex_unlock(&session->stat_mutex);
+}
+
static void destroy_session(struct stat_session *session)
{
debugfs_remove(session->file);
- reset_stat_session(session);
+ __reset_stat_session(session);
mutex_destroy(&session->stat_mutex);
kfree(session);
}
@@ -150,7 +157,7 @@
int i;
mutex_lock(&session->stat_mutex);
- reset_stat_session(session);
+ __reset_stat_session(session);
if (!ts->stat_cmp)
ts->stat_cmp = dummy_cmp;
@@ -183,7 +190,7 @@
return ret;
exit_free_rbtree:
- reset_stat_session(session);
+ __reset_stat_session(session);
mutex_unlock(&session->stat_mutex);
return ret;
}
@@ -199,17 +206,13 @@
mutex_lock(&session->stat_mutex);
/* If we are in the beginning of the file, print the headers */
- if (!*pos && session->ts->stat_headers) {
- (*pos)++;
+ if (!*pos && session->ts->stat_headers)
return SEQ_START_TOKEN;
- }
node = rb_first(&session->stat_root);
for (i = 0; node && i < *pos; i++)
node = rb_next(node);
- (*pos)++;
-
return node;
}
@@ -254,16 +257,21 @@
static int tracing_stat_open(struct inode *inode, struct file *file)
{
int ret;
-
+ struct seq_file *m;
struct stat_session *session = inode->i_private;
+ ret = stat_seq_init(session);
+ if (ret)
+ return ret;
+
ret = seq_open(file, &trace_stat_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = session;
- ret = stat_seq_init(session);
+ if (ret) {
+ reset_stat_session(session);
+ return ret;
}
+ m = file->private_data;
+ m->private = session;
return ret;
}
@@ -274,11 +282,9 @@
{
struct stat_session *session = i->i_private;
- mutex_lock(&session->stat_mutex);
reset_stat_session(session);
- mutex_unlock(&session->stat_mutex);
- return 0;
+ return seq_release(i, f);
}
static const struct file_operations tracing_stat_fops = {
diff --git a/kernel/wait.c b/kernel/wait.c
index ea7c3b4..c4bd3d8 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -10,13 +10,14 @@
#include <linux/wait.h>
#include <linux/hash.h>
-void init_waitqueue_head(wait_queue_head_t *q)
+void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *key)
{
spin_lock_init(&q->lock);
+ lockdep_set_class(&q->lock, key);
INIT_LIST_HEAD(&q->task_list);
}
-EXPORT_SYMBOL(init_waitqueue_head);
+EXPORT_SYMBOL(__init_waitqueue_head);
void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
{
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c32b1a..12327b2 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -359,6 +359,18 @@
In order to access the kmemleak file, debugfs needs to be
mounted (usually at /sys/kernel/debug).
+config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
+ int "Maximum kmemleak early log entries"
+ depends on DEBUG_KMEMLEAK
+ range 200 2000
+ default 400
+ help
+ Kmemleak must track all the memory allocations to avoid
+ reporting false positives. Since memory may be allocated or
+ freed before kmemleak is initialised, an early log buffer is
+ used to store these actions. If kmemleak reports "early log
+ buffer exceeded", please increase this value.
+
config DEBUG_KMEMLEAK_TEST
tristate "Simple test for the kernel memory leak detector"
depends on DEBUG_KMEMLEAK
diff --git a/lib/Makefile b/lib/Makefile
index b6d1857..2e78277 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -12,7 +12,7 @@
idr.o int_sqrt.o extable.o prio_tree.o \
sha1.o irq_regs.o reciprocal_div.o argv_split.o \
proportions.o prio_heap.o ratelimit.o show_mem.o \
- is_single_threaded.o plist.o decompress.o
+ is_single_threaded.o plist.o decompress.o flex_array.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/atomic64.c b/lib/atomic64.c
index c5e7255..8bee16e 100644
--- a/lib/atomic64.c
+++ b/lib/atomic64.c
@@ -13,6 +13,7 @@
#include <linux/cache.h>
#include <linux/spinlock.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <asm/atomic.h>
/*
@@ -52,6 +53,7 @@
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_read);
void atomic64_set(atomic64_t *v, long long i)
{
@@ -62,6 +64,7 @@
v->counter = i;
spin_unlock_irqrestore(lock, flags);
}
+EXPORT_SYMBOL(atomic64_set);
void atomic64_add(long long a, atomic64_t *v)
{
@@ -72,6 +75,7 @@
v->counter += a;
spin_unlock_irqrestore(lock, flags);
}
+EXPORT_SYMBOL(atomic64_add);
long long atomic64_add_return(long long a, atomic64_t *v)
{
@@ -84,6 +88,7 @@
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_add_return);
void atomic64_sub(long long a, atomic64_t *v)
{
@@ -94,6 +99,7 @@
v->counter -= a;
spin_unlock_irqrestore(lock, flags);
}
+EXPORT_SYMBOL(atomic64_sub);
long long atomic64_sub_return(long long a, atomic64_t *v)
{
@@ -106,6 +112,7 @@
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_sub_return);
long long atomic64_dec_if_positive(atomic64_t *v)
{
@@ -120,6 +127,7 @@
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_dec_if_positive);
long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
{
@@ -134,6 +142,7 @@
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_cmpxchg);
long long atomic64_xchg(atomic64_t *v, long long new)
{
@@ -147,6 +156,7 @@
spin_unlock_irqrestore(lock, flags);
return val;
}
+EXPORT_SYMBOL(atomic64_xchg);
int atomic64_add_unless(atomic64_t *v, long long a, long long u)
{
@@ -162,6 +172,7 @@
spin_unlock_irqrestore(lock, flags);
return ret;
}
+EXPORT_SYMBOL(atomic64_add_unless);
static int init_atomic64_lock(void)
{
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
index 708e2a8..600f473 100644
--- a/lib/decompress_bunzip2.c
+++ b/lib/decompress_bunzip2.c
@@ -45,12 +45,14 @@
*/
-#ifndef STATIC
+#ifdef STATIC
+#define PREBOOT
+#else
#include <linux/decompress/bunzip2.h>
-#endif /* !STATIC */
+#include <linux/slab.h>
+#endif /* STATIC */
#include <linux/decompress/mm.h>
-#include <linux/slab.h>
#ifndef INT_MAX
#define INT_MAX 0x7fffffff
@@ -681,9 +683,7 @@
set_error_fn(error_fn);
if (flush)
outbuf = malloc(BZIP2_IOBUF_SIZE);
- else
- len -= 4; /* Uncompressed size hack active in pre-boot
- environment */
+
if (!outbuf) {
error("Could not allocate output bufer");
return -1;
@@ -733,4 +733,14 @@
return i;
}
-#define decompress bunzip2
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
+ int *pos,
+ void(*error_fn)(char *x))
+{
+ return bunzip2(buf, len - 4, fill, flush, outbuf, pos, error_fn);
+}
+#endif
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
index e36b296..68dfce5 100644
--- a/lib/decompress_inflate.c
+++ b/lib/decompress_inflate.c
@@ -19,13 +19,13 @@
#include "zlib_inflate/inflate.h"
#include "zlib_inflate/infutil.h"
+#include <linux/slab.h>
#endif /* STATIC */
#include <linux/decompress/mm.h>
-#include <linux/slab.h>
-#define INBUF_LEN (16*1024)
+#define GZIP_IOBUF_SIZE (16*1024)
/* Included from initramfs et al code */
STATIC int INIT gunzip(unsigned char *buf, int len,
@@ -55,7 +55,7 @@
if (buf)
zbuf = buf;
else {
- zbuf = malloc(INBUF_LEN);
+ zbuf = malloc(GZIP_IOBUF_SIZE);
len = 0;
}
if (!zbuf) {
@@ -77,7 +77,7 @@
}
if (len == 0)
- len = fill(zbuf, INBUF_LEN);
+ len = fill(zbuf, GZIP_IOBUF_SIZE);
/* verify the gzip header */
if (len < 10 ||
@@ -113,7 +113,7 @@
while (rc == Z_OK) {
if (strm->avail_in == 0) {
/* TODO: handle case where both pos and fill are set */
- len = fill(zbuf, INBUF_LEN);
+ len = fill(zbuf, GZIP_IOBUF_SIZE);
if (len < 0) {
rc = -1;
error("read error");
diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c
index 32123a1..0b954e0 100644
--- a/lib/decompress_unlzma.c
+++ b/lib/decompress_unlzma.c
@@ -29,12 +29,14 @@
*Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifndef STATIC
+#ifdef STATIC
+#define PREBOOT
+#else
#include <linux/decompress/unlzma.h>
+#include <linux/slab.h>
#endif /* STATIC */
#include <linux/decompress/mm.h>
-#include <linux/slab.h>
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
@@ -543,9 +545,7 @@
int ret = -1;
set_error_fn(error_fn);
- if (!flush)
- in_len -= 4; /* Uncompressed size hack active in pre-boot
- environment */
+
if (buf)
inbuf = buf;
else
@@ -645,4 +645,15 @@
return ret;
}
-#define decompress unlzma
+#ifdef PREBOOT
+STATIC int INIT decompress(unsigned char *buf, int in_len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *posp,
+ void(*error_fn)(char *x)
+ )
+{
+ return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+}
+#endif
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 3b93129..65b0d99 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -716,7 +716,7 @@
for (i = 0; i < HASH_SIZE; ++i) {
INIT_LIST_HEAD(&dma_entry_hash[i].list);
- dma_entry_hash[i].lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&dma_entry_hash[i].lock);
}
if (dma_debug_fs_init() != 0) {
@@ -856,22 +856,21 @@
"stack [addr=%p]\n", addr);
}
-static inline bool overlap(void *addr, u64 size, void *start, void *end)
+static inline bool overlap(void *addr, unsigned long len, void *start, void *end)
{
- void *addr2 = (char *)addr + size;
+ unsigned long a1 = (unsigned long)addr;
+ unsigned long b1 = a1 + len;
+ unsigned long a2 = (unsigned long)start;
+ unsigned long b2 = (unsigned long)end;
- return ((addr >= start && addr < end) ||
- (addr2 >= start && addr2 < end) ||
- ((addr < start) && (addr2 >= end)));
+ return !(b1 <= a2 || a1 >= b2);
}
-static void check_for_illegal_area(struct device *dev, void *addr, u64 size)
+static void check_for_illegal_area(struct device *dev, void *addr, unsigned long len)
{
- if (overlap(addr, size, _text, _etext) ||
- overlap(addr, size, __start_rodata, __end_rodata))
- err_printk(dev, NULL, "DMA-API: device driver maps "
- "memory from kernel text or rodata "
- "[addr=%p] [size=%llu]\n", addr, size);
+ if (overlap(addr, len, _text, _etext) ||
+ overlap(addr, len, __start_rodata, __end_rodata))
+ err_printk(dev, NULL, "DMA-API: device driver maps memory from kernel text or rodata [addr=%p] [len=%lu]\n", addr, len);
}
static void check_sync(struct device *dev,
@@ -969,7 +968,8 @@
entry->type = dma_debug_single;
if (!PageHighMem(page)) {
- void *addr = ((char *)page_address(page)) + offset;
+ void *addr = page_address(page) + offset;
+
check_for_stack(dev, addr);
check_for_illegal_area(dev, addr, size);
}
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 833139c..e22c148 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -164,7 +164,7 @@
if (!newflags)
dt->num_enabled--;
- else if (!dp-flags)
+ else if (!dp->flags)
dt->num_enabled++;
dp->flags = newflags;
if (newflags) {
diff --git a/lib/flex_array.c b/lib/flex_array.c
new file mode 100644
index 0000000..08f1636
--- /dev/null
+++ b/lib/flex_array.c
@@ -0,0 +1,267 @@
+/*
+ * Flexible array managed in PAGE_SIZE parts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Dave Hansen <dave@linux.vnet.ibm.com>
+ */
+
+#include <linux/flex_array.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+struct flex_array_part {
+ char elements[FLEX_ARRAY_PART_SIZE];
+};
+
+static inline int __elements_per_part(int element_size)
+{
+ return FLEX_ARRAY_PART_SIZE / element_size;
+}
+
+static inline int bytes_left_in_base(void)
+{
+ int element_offset = offsetof(struct flex_array, parts);
+ int bytes_left = FLEX_ARRAY_BASE_SIZE - element_offset;
+ return bytes_left;
+}
+
+static inline int nr_base_part_ptrs(void)
+{
+ return bytes_left_in_base() / sizeof(struct flex_array_part *);
+}
+
+/*
+ * If a user requests an allocation which is small
+ * enough, we may simply use the space in the
+ * flex_array->parts[] array to store the user
+ * data.
+ */
+static inline int elements_fit_in_base(struct flex_array *fa)
+{
+ int data_size = fa->element_size * fa->total_nr_elements;
+ if (data_size <= bytes_left_in_base())
+ return 1;
+ return 0;
+}
+
+/**
+ * flex_array_alloc - allocate a new flexible array
+ * @element_size: the size of individual elements in the array
+ * @total: total number of elements that this should hold
+ *
+ * Note: all locking must be provided by the caller.
+ *
+ * @total is used to size internal structures. If the user ever
+ * accesses any array indexes >=@total, it will produce errors.
+ *
+ * The maximum number of elements is defined as: the number of
+ * elements that can be stored in a page times the number of
+ * page pointers that we can fit in the base structure or (using
+ * integer math):
+ *
+ * (PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *)
+ *
+ * Here's a table showing example capacities. Note that the maximum
+ * index that the get/put() functions is just nr_objects-1. This
+ * basically means that you get 4MB of storage on 32-bit and 2MB on
+ * 64-bit.
+ *
+ *
+ * Element size | Objects | Objects |
+ * PAGE_SIZE=4k | 32-bit | 64-bit |
+ * ---------------------------------|
+ * 1 bytes | 4186112 | 2093056 |
+ * 2 bytes | 2093056 | 1046528 |
+ * 3 bytes | 1395030 | 697515 |
+ * 4 bytes | 1046528 | 523264 |
+ * 32 bytes | 130816 | 65408 |
+ * 33 bytes | 126728 | 63364 |
+ * 2048 bytes | 2044 | 1022 |
+ * 2049 bytes | 1022 | 511 |
+ * void * | 1046528 | 261632 |
+ *
+ * Since 64-bit pointers are twice the size, we lose half the
+ * capacity in the base structure. Also note that no effort is made
+ * to efficiently pack objects across page boundaries.
+ */
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags)
+{
+ struct flex_array *ret;
+ int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
+
+ /* max_size will end up 0 if element_size > PAGE_SIZE */
+ if (total > max_size)
+ return NULL;
+ ret = kzalloc(sizeof(struct flex_array), flags);
+ if (!ret)
+ return NULL;
+ ret->element_size = element_size;
+ ret->total_nr_elements = total;
+ return ret;
+}
+
+static int fa_element_to_part_nr(struct flex_array *fa, int element_nr)
+{
+ return element_nr / __elements_per_part(fa->element_size);
+}
+
+/**
+ * flex_array_free_parts - just free the second-level pages
+ * @src: address of data to copy into the array
+ * @element_nr: index of the position in which to insert
+ * the new element.
+ *
+ * This is to be used in cases where the base 'struct flex_array'
+ * has been statically allocated and should not be free.
+ */
+void flex_array_free_parts(struct flex_array *fa)
+{
+ int part_nr;
+ int max_part = nr_base_part_ptrs();
+
+ if (elements_fit_in_base(fa))
+ return;
+ for (part_nr = 0; part_nr < max_part; part_nr++)
+ kfree(fa->parts[part_nr]);
+}
+
+void flex_array_free(struct flex_array *fa)
+{
+ flex_array_free_parts(fa);
+ kfree(fa);
+}
+
+static int fa_index_inside_part(struct flex_array *fa, int element_nr)
+{
+ return element_nr % __elements_per_part(fa->element_size);
+}
+
+static int index_inside_part(struct flex_array *fa, int element_nr)
+{
+ int part_offset = fa_index_inside_part(fa, element_nr);
+ return part_offset * fa->element_size;
+}
+
+static struct flex_array_part *
+__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
+{
+ struct flex_array_part *part = fa->parts[part_nr];
+ if (!part) {
+ /*
+ * This leaves the part pages uninitialized
+ * and with potentially random data, just
+ * as if the user had kmalloc()'d the whole.
+ * __GFP_ZERO can be used to zero it.
+ */
+ part = kmalloc(FLEX_ARRAY_PART_SIZE, flags);
+ if (!part)
+ return NULL;
+ fa->parts[part_nr] = part;
+ }
+ return part;
+}
+
+/**
+ * flex_array_put - copy data into the array at @element_nr
+ * @src: address of data to copy into the array
+ * @element_nr: index of the position in which to insert
+ * the new element.
+ *
+ * Note that this *copies* the contents of @src into
+ * the array. If you are trying to store an array of
+ * pointers, make sure to pass in &ptr instead of ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags)
+{
+ int part_nr = fa_element_to_part_nr(fa, element_nr);
+ struct flex_array_part *part;
+ void *dst;
+
+ if (element_nr >= fa->total_nr_elements)
+ return -ENOSPC;
+ if (elements_fit_in_base(fa))
+ part = (struct flex_array_part *)&fa->parts[0];
+ else
+ part = __fa_get_part(fa, part_nr, flags);
+ if (!part)
+ return -ENOMEM;
+ dst = &part->elements[index_inside_part(fa, element_nr)];
+ memcpy(dst, src, fa->element_size);
+ return 0;
+}
+
+/**
+ * flex_array_prealloc - guarantee that array space exists
+ * @start: index of first array element for which space is allocated
+ * @end: index of last (inclusive) element for which space is allocated
+ *
+ * This will guarantee that no future calls to flex_array_put()
+ * will allocate memory. It can be used if you are expecting to
+ * be holding a lock or in some atomic context while writing
+ * data into the array.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags)
+{
+ int start_part;
+ int end_part;
+ int part_nr;
+ struct flex_array_part *part;
+
+ if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+ return -ENOSPC;
+ if (elements_fit_in_base(fa))
+ return 0;
+ start_part = fa_element_to_part_nr(fa, start);
+ end_part = fa_element_to_part_nr(fa, end);
+ for (part_nr = start_part; part_nr <= end_part; part_nr++) {
+ part = __fa_get_part(fa, part_nr, flags);
+ if (!part)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/**
+ * flex_array_get - pull data back out of the array
+ * @element_nr: index of the element to fetch from the array
+ *
+ * Returns a pointer to the data at index @element_nr. Note
+ * that this is a copy of the data that was passed in. If you
+ * are using this to store pointers, you'll get back &ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+void *flex_array_get(struct flex_array *fa, int element_nr)
+{
+ int part_nr = fa_element_to_part_nr(fa, element_nr);
+ struct flex_array_part *part;
+
+ if (element_nr >= fa->total_nr_elements)
+ return NULL;
+ if (!fa->parts[part_nr])
+ return NULL;
+ if (elements_fit_in_base(fa))
+ part = (struct flex_array_part *)&fa->parts[0];
+ else
+ part = fa->parts[part_nr];
+ return &part->elements[index_inside_part(fa, element_nr)];
+}
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a295e40..0d475d8 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -314,6 +314,7 @@
miter->__sg = sgl;
miter->__nents = nents;
miter->__offset = 0;
+ WARN_ON(!(flags & (SG_MITER_TO_SG | SG_MITER_FROM_SG)));
miter->__flags = flags;
}
EXPORT_SYMBOL(sg_miter_start);
@@ -394,6 +395,9 @@
if (miter->addr) {
miter->__offset += miter->consumed;
+ if (miter->__flags & SG_MITER_TO_SG)
+ flush_kernel_dcache_page(miter->page);
+
if (miter->__flags & SG_MITER_ATOMIC) {
WARN_ON(!irqs_disabled());
kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
@@ -426,8 +430,14 @@
unsigned int offset = 0;
struct sg_mapping_iter miter;
unsigned long flags;
+ unsigned int sg_flags = SG_MITER_ATOMIC;
- sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+ if (to_buffer)
+ sg_flags |= SG_MITER_FROM_SG;
+ else
+ sg_flags |= SG_MITER_TO_SG;
+
+ sg_miter_start(&miter, sgl, nents, sg_flags);
local_irq_save(flags);
@@ -438,10 +448,8 @@
if (to_buffer)
memcpy(buf + offset, miter.addr, len);
- else {
+ else
memcpy(miter.addr, buf + offset, len);
- flush_kernel_dcache_page(miter.page);
- }
offset += len;
}
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 493b468..c86edd2 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -283,7 +283,6 @@
__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1])
};
-
void clear_bdi_congested(struct backing_dev_info *bdi, int sync)
{
enum bdi_state bit;
@@ -308,18 +307,18 @@
/**
* congestion_wait - wait for a backing_dev to become uncongested
- * @rw: READ or WRITE
+ * @sync: SYNC or ASYNC IO
* @timeout: timeout in jiffies
*
* Waits for up to @timeout jiffies for a backing_dev (any backing_dev) to exit
* write congestion. If no backing_devs are congested then just wait for the
* next write to be completed.
*/
-long congestion_wait(int rw, long timeout)
+long congestion_wait(int sync, long timeout)
{
long ret;
DEFINE_WAIT(wait);
- wait_queue_head_t *wqh = &congestion_wqh[rw];
+ wait_queue_head_t *wqh = &congestion_wqh[sync];
prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
ret = io_schedule_timeout(timeout);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index d2a9ce9..701740c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -12,6 +12,7 @@
#include <linux/pfn.h>
#include <linux/bootmem.h>
#include <linux/module.h>
+#include <linux/kmemleak.h>
#include <asm/bug.h>
#include <asm/io.h>
@@ -335,6 +336,8 @@
{
unsigned long start, end;
+ kmemleak_free_part(__va(physaddr), size);
+
start = PFN_UP(physaddr);
end = PFN_DOWN(physaddr + size);
@@ -354,6 +357,8 @@
{
unsigned long start, end;
+ kmemleak_free_part(__va(addr), size);
+
start = PFN_UP(addr);
end = PFN_DOWN(addr + size);
@@ -516,6 +521,7 @@
region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
start_off);
memset(region, 0, size);
+ kmemleak_alloc(region, size, 1, 0);
return region;
}
diff --git a/mm/dmapool.c b/mm/dmapool.c
index b1f0885..3df0637 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -86,10 +86,12 @@
unsigned pages = 0;
unsigned blocks = 0;
+ spin_lock_irq(&pool->lock);
list_for_each_entry(page, &pool->page_list, page_list) {
pages++;
blocks += page->in_use;
}
+ spin_unlock_irq(&pool->lock);
/* per-pool info, no real statistics yet */
temp = scnprintf(next, size, "%-16s %4u %4Zu %4Zu %2u\n",
diff --git a/mm/filemap.c b/mm/filemap.c
index 2239671..ccea3b6 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2272,6 +2272,7 @@
pagefault_enable();
flush_dcache_page(page);
+ mark_page_accessed(page);
status = a_ops->write_end(file, mapping, pos, bytes, copied,
page, fsdata);
if (unlikely(status < 0))
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d0351e3..cafdcee 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2370,7 +2370,7 @@
long chg = region_truncate(&inode->i_mapping->private_list, offset);
spin_lock(&inode->i_lock);
- inode->i_blocks -= blocks_per_huge_page(h);
+ inode->i_blocks -= (blocks_per_huge_page(h) * freed);
spin_unlock(&inode->i_lock);
hugetlb_put_quota(inode->i_mapping, (chg - freed));
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c96f2c8..4872673 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -48,10 +48,10 @@
* scanned. This list is only modified during a scanning episode when the
* scan_mutex is held. At the end of a scan, the gray_list is always empty.
* Note that the kmemleak_object.use_count is incremented when an object is
- * added to the gray_list and therefore cannot be freed
- * - kmemleak_mutex (mutex): prevents multiple users of the "kmemleak" debugfs
- * file together with modifications to the memory scanning parameters
- * including the scan_thread pointer
+ * added to the gray_list and therefore cannot be freed. This mutex also
+ * prevents multiple users of the "kmemleak" debugfs file together with
+ * modifications to the memory scanning parameters including the scan_thread
+ * pointer
*
* The kmemleak_object structures have a use_count incremented or decremented
* using the get_object()/put_object() functions. When the use_count becomes
@@ -103,11 +103,10 @@
* Kmemleak configuration and common defines.
*/
#define MAX_TRACE 16 /* stack trace length */
-#define REPORTS_NR 50 /* maximum number of reported leaks */
#define MSECS_MIN_AGE 5000 /* minimum object age for reporting */
-#define MSECS_SCAN_YIELD 10 /* CPU yielding period */
#define SECS_FIRST_SCAN 60 /* delay before the first scan */
#define SECS_SCAN_WAIT 600 /* subsequent auto scanning delay */
+#define GRAY_LIST_PASSES 25 /* maximum number of gray list scans */
#define BYTES_PER_POINTER sizeof(void *)
@@ -159,6 +158,8 @@
#define OBJECT_REPORTED (1 << 1)
/* flag set to not scan the object */
#define OBJECT_NO_SCAN (1 << 2)
+/* flag set on newly allocated objects */
+#define OBJECT_NEW (1 << 3)
/* the list of all allocated objects */
static LIST_HEAD(object_list);
@@ -186,22 +187,16 @@
static unsigned long min_addr = ULONG_MAX;
static unsigned long max_addr;
-/* used for yielding the CPU to other tasks during scanning */
-static unsigned long next_scan_yield;
static struct task_struct *scan_thread;
-static unsigned long jiffies_scan_yield;
+/* used to avoid reporting of recently allocated objects */
static unsigned long jiffies_min_age;
+static unsigned long jiffies_last_scan;
/* delay between automatic memory scannings */
static signed long jiffies_scan_wait;
/* enables or disables the task stacks scanning */
-static int kmemleak_stack_scan;
-/* mutex protecting the memory scanning */
+static int kmemleak_stack_scan = 1;
+/* protects the memory scanning, parameters and debug/kmemleak file access */
static DEFINE_MUTEX(scan_mutex);
-/* mutex protecting the access to the /sys/kernel/debug/kmemleak file */
-static DEFINE_MUTEX(kmemleak_mutex);
-
-/* number of leaks reported (for limitation purposes) */
-static int reported_leaks;
/*
* Early object allocation/freeing logging. Kmemleak is initialized after the
@@ -215,6 +210,7 @@
enum {
KMEMLEAK_ALLOC,
KMEMLEAK_FREE,
+ KMEMLEAK_FREE_PART,
KMEMLEAK_NOT_LEAK,
KMEMLEAK_IGNORE,
KMEMLEAK_SCAN_AREA,
@@ -235,7 +231,7 @@
};
/* early logging buffer and current position */
-static struct early_log early_log[200];
+static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE];
static int crt_early_log;
static void kmemleak_disable(void);
@@ -278,13 +274,9 @@
return object->min_count != -1 && object->count >= object->min_count;
}
-/*
- * Objects are considered referenced if their color is gray and they have not
- * been deleted.
- */
-static int referenced_object(struct kmemleak_object *object)
+static int color_black(const struct kmemleak_object *object)
{
- return (object->flags & OBJECT_ALLOCATED) && color_gray(object);
+ return object->min_count == -1;
}
/*
@@ -295,42 +287,28 @@
static int unreferenced_object(struct kmemleak_object *object)
{
return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
- time_is_before_eq_jiffies(object->jiffies + jiffies_min_age);
+ time_before_eq(object->jiffies + jiffies_min_age,
+ jiffies_last_scan);
}
/*
- * Printing of the (un)referenced objects information, either to the seq file
- * or to the kernel log. The print_referenced/print_unreferenced functions
- * must be called with the object->lock held.
+ * Printing of the unreferenced objects information to the seq file. The
+ * print_unreferenced function must be called with the object->lock held.
*/
-#define print_helper(seq, x...) do { \
- struct seq_file *s = (seq); \
- if (s) \
- seq_printf(s, x); \
- else \
- pr_info(x); \
-} while (0)
-
-static void print_referenced(struct kmemleak_object *object)
-{
- pr_info("referenced object 0x%08lx (size %zu)\n",
- object->pointer, object->size);
-}
-
static void print_unreferenced(struct seq_file *seq,
struct kmemleak_object *object)
{
int i;
- print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n",
- object->pointer, object->size);
- print_helper(seq, " comm \"%s\", pid %d, jiffies %lu\n",
- object->comm, object->pid, object->jiffies);
- print_helper(seq, " backtrace:\n");
+ seq_printf(seq, "unreferenced object 0x%08lx (size %zu):\n",
+ object->pointer, object->size);
+ seq_printf(seq, " comm \"%s\", pid %d, jiffies %lu\n",
+ object->comm, object->pid, object->jiffies);
+ seq_printf(seq, " backtrace:\n");
for (i = 0; i < object->trace_len; i++) {
void *ptr = (void *)object->trace[i];
- print_helper(seq, " [<%p>] %pS\n", ptr, ptr);
+ seq_printf(seq, " [<%p>] %pS\n", ptr, ptr);
}
}
@@ -478,7 +456,7 @@
INIT_HLIST_HEAD(&object->area_list);
spin_lock_init(&object->lock);
atomic_set(&object->use_count, 1);
- object->flags = OBJECT_ALLOCATED;
+ object->flags = OBJECT_ALLOCATED | OBJECT_NEW;
object->pointer = ptr;
object->size = size;
object->min_count = min_count;
@@ -546,39 +524,87 @@
* Remove the metadata (struct kmemleak_object) for a memory block from the
* object_list and object_tree_root and decrement its use_count.
*/
-static void delete_object(unsigned long ptr)
+static void __delete_object(struct kmemleak_object *object)
{
unsigned long flags;
- struct kmemleak_object *object;
write_lock_irqsave(&kmemleak_lock, flags);
- object = lookup_object(ptr, 0);
- if (!object) {
- kmemleak_warn("Freeing unknown object at 0x%08lx\n",
- ptr);
- write_unlock_irqrestore(&kmemleak_lock, flags);
- return;
- }
prio_tree_remove(&object_tree_root, &object->tree_node);
list_del_rcu(&object->object_list);
write_unlock_irqrestore(&kmemleak_lock, flags);
WARN_ON(!(object->flags & OBJECT_ALLOCATED));
- WARN_ON(atomic_read(&object->use_count) < 1);
+ WARN_ON(atomic_read(&object->use_count) < 2);
/*
* Locking here also ensures that the corresponding memory block
* cannot be freed when it is being scanned.
*/
spin_lock_irqsave(&object->lock, flags);
- if (object->flags & OBJECT_REPORTED)
- print_referenced(object);
object->flags &= ~OBJECT_ALLOCATED;
spin_unlock_irqrestore(&object->lock, flags);
put_object(object);
}
/*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it.
+ */
+static void delete_object_full(unsigned long ptr)
+{
+ struct kmemleak_object *object;
+
+ object = find_and_get_object(ptr, 0);
+ if (!object) {
+#ifdef DEBUG
+ kmemleak_warn("Freeing unknown object at 0x%08lx\n",
+ ptr);
+#endif
+ return;
+ }
+ __delete_object(object);
+ put_object(object);
+}
+
+/*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it. If the memory block is partially freed, the function may create
+ * additional metadata for the remaining parts of the block.
+ */
+static void delete_object_part(unsigned long ptr, size_t size)
+{
+ struct kmemleak_object *object;
+ unsigned long start, end;
+
+ object = find_and_get_object(ptr, 1);
+ if (!object) {
+#ifdef DEBUG
+ kmemleak_warn("Partially freeing unknown object at 0x%08lx "
+ "(size %zu)\n", ptr, size);
+#endif
+ return;
+ }
+ __delete_object(object);
+
+ /*
+ * Create one or two objects that may result from the memory block
+ * split. Note that partial freeing is only done by free_bootmem() and
+ * this happens before kmemleak_init() is called. The path below is
+ * only executed during early log recording in kmemleak_init(), so
+ * GFP_KERNEL is enough.
+ */
+ start = object->pointer;
+ end = object->pointer + object->size;
+ if (ptr > start)
+ create_object(start, ptr - start, object->min_count,
+ GFP_KERNEL);
+ if (ptr + size < end)
+ create_object(ptr + size, end - ptr - size, object->min_count,
+ GFP_KERNEL);
+
+ put_object(object);
+}
+/*
* Make a object permanently as gray-colored so that it can no longer be
* reported as a leak. This is used in general to mark a false positive.
*/
@@ -696,7 +722,8 @@
struct early_log *log;
if (crt_early_log >= ARRAY_SIZE(early_log)) {
- kmemleak_stop("Early log buffer exceeded\n");
+ pr_warning("Early log buffer exceeded\n");
+ kmemleak_disable();
return;
}
@@ -741,13 +768,28 @@
pr_debug("%s(0x%p)\n", __func__, ptr);
if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
- delete_object((unsigned long)ptr);
+ delete_object_full((unsigned long)ptr);
else if (atomic_read(&kmemleak_early_log))
log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0);
}
EXPORT_SYMBOL_GPL(kmemleak_free);
/*
+ * Partial memory freeing function callback. This function is usually called
+ * from bootmem allocator when (part of) a memory block is freed.
+ */
+void kmemleak_free_part(const void *ptr, size_t size)
+{
+ pr_debug("%s(0x%p)\n", __func__, ptr);
+
+ if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+ delete_object_part((unsigned long)ptr, size);
+ else if (atomic_read(&kmemleak_early_log))
+ log_early(KMEMLEAK_FREE_PART, ptr, size, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(kmemleak_free_part);
+
+/*
* Mark an already allocated memory block as a false positive. This will cause
* the block to no longer be reported as leak and always be scanned.
*/
@@ -808,21 +850,6 @@
EXPORT_SYMBOL(kmemleak_no_scan);
/*
- * Yield the CPU so that other tasks get a chance to run. The yielding is
- * rate-limited to avoid excessive number of calls to the schedule() function
- * during memory scanning.
- */
-static void scan_yield(void)
-{
- might_sleep();
-
- if (time_is_before_eq_jiffies(next_scan_yield)) {
- schedule();
- next_scan_yield = jiffies + jiffies_scan_yield;
- }
-}
-
-/*
* Memory scanning is a long process and it needs to be interruptable. This
* function checks whether such interrupt condition occured.
*/
@@ -848,7 +875,7 @@
* found to the gray list.
*/
static void scan_block(void *_start, void *_end,
- struct kmemleak_object *scanned)
+ struct kmemleak_object *scanned, int allow_resched)
{
unsigned long *ptr;
unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER);
@@ -859,18 +886,11 @@
unsigned long pointer = *ptr;
struct kmemleak_object *object;
+ if (allow_resched)
+ cond_resched();
if (scan_should_stop())
break;
- /*
- * When scanning a memory block with a corresponding
- * kmemleak_object, the CPU yielding is handled in the calling
- * code since it holds the object->lock to avoid the block
- * freeing.
- */
- if (!scanned)
- scan_yield();
-
object = find_and_get_object(pointer, 1);
if (!object)
continue;
@@ -931,12 +951,12 @@
goto out;
if (hlist_empty(&object->area_list))
scan_block((void *)object->pointer,
- (void *)(object->pointer + object->size), object);
+ (void *)(object->pointer + object->size), object, 0);
else
hlist_for_each_entry(area, elem, &object->area_list, node)
scan_block((void *)(object->pointer + area->offset),
(void *)(object->pointer + area->offset
- + area->length), object);
+ + area->length), object, 0);
out:
spin_unlock_irqrestore(&object->lock, flags);
}
@@ -952,6 +972,10 @@
struct kmemleak_object *object, *tmp;
struct task_struct *task;
int i;
+ int new_leaks = 0;
+ int gray_list_pass = 0;
+
+ jiffies_last_scan = jiffies;
/* prepare the kmemleak_object's */
rcu_read_lock();
@@ -970,6 +994,7 @@
#endif
/* reset the reference count (whiten the object) */
object->count = 0;
+ object->flags &= ~OBJECT_NEW;
if (color_gray(object) && get_object(object))
list_add_tail(&object->gray_list, &gray_list);
@@ -978,14 +1003,14 @@
rcu_read_unlock();
/* data/bss scanning */
- scan_block(_sdata, _edata, NULL);
- scan_block(__bss_start, __bss_stop, NULL);
+ scan_block(_sdata, _edata, NULL, 1);
+ scan_block(__bss_start, __bss_stop, NULL, 1);
#ifdef CONFIG_SMP
/* per-cpu sections scanning */
for_each_possible_cpu(i)
scan_block(__per_cpu_start + per_cpu_offset(i),
- __per_cpu_end + per_cpu_offset(i), NULL);
+ __per_cpu_end + per_cpu_offset(i), NULL, 1);
#endif
/*
@@ -1007,7 +1032,7 @@
/* only scan if page is in use */
if (page_count(page) == 0)
continue;
- scan_block(page, page + 1, NULL);
+ scan_block(page, page + 1, NULL, 1);
}
}
@@ -1019,7 +1044,8 @@
read_lock(&tasklist_lock);
for_each_process(task)
scan_block(task_stack_page(task),
- task_stack_page(task) + THREAD_SIZE, NULL);
+ task_stack_page(task) + THREAD_SIZE,
+ NULL, 0);
read_unlock(&tasklist_lock);
}
@@ -1031,9 +1057,10 @@
* kmemleak objects cannot be freed from outside the loop because their
* use_count was increased.
*/
+repeat:
object = list_entry(gray_list.next, typeof(*object), gray_list);
while (&object->gray_list != &gray_list) {
- scan_yield();
+ cond_resched();
/* may add new objects to the list */
if (!scan_should_stop())
@@ -1048,7 +1075,59 @@
object = tmp;
}
+
+ if (scan_should_stop() || ++gray_list_pass >= GRAY_LIST_PASSES)
+ goto scan_end;
+
+ /*
+ * Check for new objects allocated during this scanning and add them
+ * to the gray list.
+ */
+ rcu_read_lock();
+ list_for_each_entry_rcu(object, &object_list, object_list) {
+ spin_lock_irqsave(&object->lock, flags);
+ if ((object->flags & OBJECT_NEW) && !color_black(object) &&
+ get_object(object)) {
+ object->flags &= ~OBJECT_NEW;
+ list_add_tail(&object->gray_list, &gray_list);
+ }
+ spin_unlock_irqrestore(&object->lock, flags);
+ }
+ rcu_read_unlock();
+
+ if (!list_empty(&gray_list))
+ goto repeat;
+
+scan_end:
WARN_ON(!list_empty(&gray_list));
+
+ /*
+ * If scanning was stopped or new objects were being allocated at a
+ * higher rate than gray list scanning, do not report any new
+ * unreferenced objects.
+ */
+ if (scan_should_stop() || gray_list_pass >= GRAY_LIST_PASSES)
+ return;
+
+ /*
+ * Scanning result reporting.
+ */
+ rcu_read_lock();
+ list_for_each_entry_rcu(object, &object_list, object_list) {
+ spin_lock_irqsave(&object->lock, flags);
+ if (unreferenced_object(object) &&
+ !(object->flags & OBJECT_REPORTED)) {
+ object->flags |= OBJECT_REPORTED;
+ new_leaks++;
+ }
+ spin_unlock_irqrestore(&object->lock, flags);
+ }
+ rcu_read_unlock();
+
+ if (new_leaks)
+ pr_info("%d new suspected memory leaks (see "
+ "/sys/kernel/debug/kmemleak)\n", new_leaks);
+
}
/*
@@ -1060,6 +1139,7 @@
static int first_run = 1;
pr_info("Automatic memory scanning thread started\n");
+ set_user_nice(current, 10);
/*
* Wait before the first scan to allow the system to fully initialize.
@@ -1070,36 +1150,12 @@
}
while (!kthread_should_stop()) {
- struct kmemleak_object *object;
signed long timeout = jiffies_scan_wait;
mutex_lock(&scan_mutex);
-
kmemleak_scan();
- reported_leaks = 0;
-
- rcu_read_lock();
- list_for_each_entry_rcu(object, &object_list, object_list) {
- unsigned long flags;
-
- if (reported_leaks >= REPORTS_NR)
- break;
- spin_lock_irqsave(&object->lock, flags);
- if (!(object->flags & OBJECT_REPORTED) &&
- unreferenced_object(object)) {
- print_unreferenced(NULL, object);
- object->flags |= OBJECT_REPORTED;
- reported_leaks++;
- } else if ((object->flags & OBJECT_REPORTED) &&
- referenced_object(object)) {
- print_referenced(object);
- object->flags &= ~OBJECT_REPORTED;
- }
- spin_unlock_irqrestore(&object->lock, flags);
- }
- rcu_read_unlock();
-
mutex_unlock(&scan_mutex);
+
/* wait before the next scan */
while (timeout && !kthread_should_stop())
timeout = schedule_timeout_interruptible(timeout);
@@ -1112,7 +1168,7 @@
/*
* Start the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
*/
void start_scan_thread(void)
{
@@ -1127,7 +1183,7 @@
/*
* Stop the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
*/
void stop_scan_thread(void)
{
@@ -1146,13 +1202,11 @@
{
struct kmemleak_object *object;
loff_t n = *pos;
+ int err;
- if (!n) {
- kmemleak_scan();
- reported_leaks = 0;
- }
- if (reported_leaks >= REPORTS_NR)
- return NULL;
+ err = mutex_lock_interruptible(&scan_mutex);
+ if (err < 0)
+ return ERR_PTR(err);
rcu_read_lock();
list_for_each_entry_rcu(object, &object_list, object_list) {
@@ -1163,7 +1217,6 @@
}
object = NULL;
out:
- rcu_read_unlock();
return object;
}
@@ -1178,17 +1231,13 @@
struct list_head *n = &prev_obj->object_list;
++(*pos);
- if (reported_leaks >= REPORTS_NR)
- goto out;
- rcu_read_lock();
list_for_each_continue_rcu(n, &object_list) {
next_obj = list_entry(n, struct kmemleak_object, object_list);
if (get_object(next_obj))
break;
}
- rcu_read_unlock();
-out:
+
put_object(prev_obj);
return next_obj;
}
@@ -1198,8 +1247,16 @@
*/
static void kmemleak_seq_stop(struct seq_file *seq, void *v)
{
- if (v)
- put_object(v);
+ if (!IS_ERR(v)) {
+ /*
+ * kmemleak_seq_start may return ERR_PTR if the scan_mutex
+ * waiting was interrupted, so only release it if !IS_ERR.
+ */
+ rcu_read_unlock();
+ mutex_unlock(&scan_mutex);
+ if (v)
+ put_object(v);
+ }
}
/*
@@ -1211,11 +1268,8 @@
unsigned long flags;
spin_lock_irqsave(&object->lock, flags);
- if (!unreferenced_object(object))
- goto out;
- print_unreferenced(seq, object);
- reported_leaks++;
-out:
+ if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object))
+ print_unreferenced(seq, object);
spin_unlock_irqrestore(&object->lock, flags);
return 0;
}
@@ -1229,43 +1283,15 @@
static int kmemleak_open(struct inode *inode, struct file *file)
{
- int ret = 0;
-
if (!atomic_read(&kmemleak_enabled))
return -EBUSY;
- ret = mutex_lock_interruptible(&kmemleak_mutex);
- if (ret < 0)
- goto out;
- if (file->f_mode & FMODE_READ) {
- ret = mutex_lock_interruptible(&scan_mutex);
- if (ret < 0)
- goto kmemleak_unlock;
- ret = seq_open(file, &kmemleak_seq_ops);
- if (ret < 0)
- goto scan_unlock;
- }
- return ret;
-
-scan_unlock:
- mutex_unlock(&scan_mutex);
-kmemleak_unlock:
- mutex_unlock(&kmemleak_mutex);
-out:
- return ret;
+ return seq_open(file, &kmemleak_seq_ops);
}
static int kmemleak_release(struct inode *inode, struct file *file)
{
- int ret = 0;
-
- if (file->f_mode & FMODE_READ) {
- seq_release(inode, file);
- mutex_unlock(&scan_mutex);
- }
- mutex_unlock(&kmemleak_mutex);
-
- return ret;
+ return seq_release(inode, file);
}
/*
@@ -1278,21 +1304,24 @@
* scan=off - stop the automatic memory scanning thread
* scan=... - set the automatic memory scanning period in seconds (0 to
* disable it)
+ * scan - trigger a memory scan
*/
static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
size_t size, loff_t *ppos)
{
char buf[64];
int buf_size;
-
- if (!atomic_read(&kmemleak_enabled))
- return -EBUSY;
+ int ret;
buf_size = min(size, (sizeof(buf) - 1));
if (strncpy_from_user(buf, user_buf, buf_size) < 0)
return -EFAULT;
buf[buf_size] = 0;
+ ret = mutex_lock_interruptible(&scan_mutex);
+ if (ret < 0)
+ return ret;
+
if (strncmp(buf, "off", 3) == 0)
kmemleak_disable();
else if (strncmp(buf, "stack=on", 8) == 0)
@@ -1305,18 +1334,24 @@
stop_scan_thread();
else if (strncmp(buf, "scan=", 5) == 0) {
unsigned long secs;
- int err;
- err = strict_strtoul(buf + 5, 0, &secs);
- if (err < 0)
- return err;
+ ret = strict_strtoul(buf + 5, 0, &secs);
+ if (ret < 0)
+ goto out;
stop_scan_thread();
if (secs) {
jiffies_scan_wait = msecs_to_jiffies(secs * 1000);
start_scan_thread();
}
- } else
- return -EINVAL;
+ } else if (strncmp(buf, "scan", 4) == 0)
+ kmemleak_scan();
+ else
+ ret = -EINVAL;
+
+out:
+ mutex_unlock(&scan_mutex);
+ if (ret < 0)
+ return ret;
/* ignore the rest of the buffer, only one command at a time */
*ppos += size;
@@ -1340,14 +1375,12 @@
{
struct kmemleak_object *object;
- mutex_lock(&kmemleak_mutex);
- stop_scan_thread();
- mutex_unlock(&kmemleak_mutex);
-
mutex_lock(&scan_mutex);
+ stop_scan_thread();
+
rcu_read_lock();
list_for_each_entry_rcu(object, &object_list, object_list)
- delete_object(object->pointer);
+ delete_object_full(object->pointer);
rcu_read_unlock();
mutex_unlock(&scan_mutex);
@@ -1411,7 +1444,6 @@
int i;
unsigned long flags;
- jiffies_scan_yield = msecs_to_jiffies(MSECS_SCAN_YIELD);
jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
@@ -1443,6 +1475,9 @@
case KMEMLEAK_FREE:
kmemleak_free(log->ptr);
break;
+ case KMEMLEAK_FREE_PART:
+ kmemleak_free_part(log->ptr, log->size);
+ break;
case KMEMLEAK_NOT_LEAK:
kmemleak_not_leak(log->ptr);
break;
@@ -1486,9 +1521,9 @@
&kmemleak_fops);
if (!dentry)
pr_warning("Failed to create the debugfs kmemleak file\n");
- mutex_lock(&kmemleak_mutex);
+ mutex_lock(&scan_mutex);
start_scan_thread();
- mutex_unlock(&kmemleak_mutex);
+ mutex_unlock(&scan_mutex);
pr_info("Kernel memory leak detector initialized\n");
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2fa20d..fd4529d 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1207,6 +1207,12 @@
ret = 0;
out:
unlock_page_cgroup(pc);
+ /*
+ * We charges against "to" which may not have any tasks. Then, "to"
+ * can be under rmdir(). But in current implementation, caller of
+ * this function is just force_empty() and it's garanteed that
+ * "to" is never removed. So, we don't check rmdir status here.
+ */
return ret;
}
@@ -1428,6 +1434,7 @@
return;
if (!ptr)
return;
+ cgroup_exclude_rmdir(&ptr->css);
pc = lookup_page_cgroup(page);
mem_cgroup_lru_del_before_commit_swapcache(page);
__mem_cgroup_commit_charge(ptr, pc, ctype);
@@ -1457,8 +1464,12 @@
}
rcu_read_unlock();
}
- /* add this page(page_cgroup) to the LRU we want. */
-
+ /*
+ * At swapin, we may charge account against cgroup which has no tasks.
+ * So, rmdir()->pre_destroy() can be called while we do this charge.
+ * In that case, we need to call pre_destroy() again. check it here.
+ */
+ cgroup_release_and_wakeup_rmdir(&ptr->css);
}
void mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr)
@@ -1664,7 +1675,7 @@
if (!mem)
return;
-
+ cgroup_exclude_rmdir(&mem->css);
/* at migration success, oldpage->mapping is NULL. */
if (oldpage->mapping) {
target = oldpage;
@@ -1704,6 +1715,12 @@
*/
if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
mem_cgroup_uncharge_page(target);
+ /*
+ * At migration, we may charge account against cgroup which has no tasks
+ * So, rmdir()->pre_destroy() can be called while we do this charge.
+ * In that case, we need to call pre_destroy() again. check it here.
+ */
+ cgroup_release_and_wakeup_rmdir(&mem->css);
}
/*
@@ -1973,7 +1990,7 @@
if (!progress) {
nr_retries--;
/* maybe some writeback is necessary */
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
}
diff --git a/mm/memory.c b/mm/memory.c
index f46ac18..aede2ce 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -135,11 +135,12 @@
* Note: this doesn't free the actual pages themselves. That
* has been handled earlier when unmapping all the memory regions.
*/
-static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd)
+static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
+ unsigned long addr)
{
pgtable_t token = pmd_pgtable(*pmd);
pmd_clear(pmd);
- pte_free_tlb(tlb, token);
+ pte_free_tlb(tlb, token, addr);
tlb->mm->nr_ptes--;
}
@@ -157,7 +158,7 @@
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
continue;
- free_pte_range(tlb, pmd);
+ free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
start &= PUD_MASK;
@@ -173,7 +174,7 @@
pmd = pmd_offset(pud, start);
pud_clear(pud);
- pmd_free_tlb(tlb, pmd);
+ pmd_free_tlb(tlb, pmd, start);
}
static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -206,7 +207,7 @@
pud = pud_offset(pgd, start);
pgd_clear(pgd);
- pud_free_tlb(tlb, pud);
+ pud_free_tlb(tlb, pud, start);
}
/*
@@ -1207,8 +1208,8 @@
int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int flags,
- struct page **pages, struct vm_area_struct **vmas)
+ unsigned long start, int nr_pages, int flags,
+ struct page **pages, struct vm_area_struct **vmas)
{
int i;
unsigned int vm_flags = 0;
@@ -1217,7 +1218,7 @@
int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS);
int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL);
- if (len <= 0)
+ if (nr_pages <= 0)
return 0;
/*
* Require read or write permissions.
@@ -1269,7 +1270,7 @@
vmas[i] = gate_vma;
i++;
start += PAGE_SIZE;
- len--;
+ nr_pages--;
continue;
}
@@ -1280,7 +1281,7 @@
if (is_vm_hugetlb_page(vma)) {
i = follow_hugetlb_page(mm, vma, pages, vmas,
- &start, &len, i, write);
+ &start, &nr_pages, i, write);
continue;
}
@@ -1357,9 +1358,9 @@
vmas[i] = vma;
i++;
start += PAGE_SIZE;
- len--;
- } while (len && start < vma->vm_end);
- } while (len);
+ nr_pages--;
+ } while (nr_pages && start < vma->vm_end);
+ } while (nr_pages);
return i;
}
@@ -1368,7 +1369,7 @@
* @tsk: task_struct of target task
* @mm: mm_struct of target mm
* @start: starting user address
- * @len: number of pages from start to pin
+ * @nr_pages: number of pages from start to pin
* @write: whether pages will be written to by the caller
* @force: whether to force write access even if user mapping is
* readonly. This will result in the page being COWed even
@@ -1380,7 +1381,7 @@
* Or NULL if the caller does not require them.
*
* Returns number of pages pinned. This may be fewer than the number
- * requested. If len is 0 or negative, returns 0. If no pages
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno. Each page returned must be released
* with a put_page() call when it is finished with. vmas will only
* remain valid while mmap_sem is held.
@@ -1414,7 +1415,7 @@
* See also get_user_pages_fast, for performance critical applications.
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
int flags = 0;
@@ -1424,9 +1425,7 @@
if (force)
flags |= GUP_FLAGS_FORCE;
- return __get_user_pages(tsk, mm,
- start, len, flags,
- pages, vmas);
+ return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
}
EXPORT_SYMBOL(get_user_pages);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e08e2c4..7dd9d9f 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -191,25 +191,27 @@
* Must be called holding task's alloc_lock to protect task's mems_allowed
* and mempolicy. May also be called holding the mmap_semaphore for write.
*/
-static int mpol_set_nodemask(struct mempolicy *pol, const nodemask_t *nodes)
+static int mpol_set_nodemask(struct mempolicy *pol,
+ const nodemask_t *nodes, struct nodemask_scratch *nsc)
{
- nodemask_t cpuset_context_nmask;
int ret;
/* if mode is MPOL_DEFAULT, pol is NULL. This is right. */
if (pol == NULL)
return 0;
+ /* Check N_HIGH_MEMORY */
+ nodes_and(nsc->mask1,
+ cpuset_current_mems_allowed, node_states[N_HIGH_MEMORY]);
VM_BUG_ON(!nodes);
if (pol->mode == MPOL_PREFERRED && nodes_empty(*nodes))
nodes = NULL; /* explicit local allocation */
else {
if (pol->flags & MPOL_F_RELATIVE_NODES)
- mpol_relative_nodemask(&cpuset_context_nmask, nodes,
- &cpuset_current_mems_allowed);
+ mpol_relative_nodemask(&nsc->mask2, nodes,&nsc->mask1);
else
- nodes_and(cpuset_context_nmask, *nodes,
- cpuset_current_mems_allowed);
+ nodes_and(nsc->mask2, *nodes, nsc->mask1);
+
if (mpol_store_user_nodemask(pol))
pol->w.user_nodemask = *nodes;
else
@@ -217,8 +219,10 @@
cpuset_current_mems_allowed;
}
- ret = mpol_ops[pol->mode].create(pol,
- nodes ? &cpuset_context_nmask : NULL);
+ if (nodes)
+ ret = mpol_ops[pol->mode].create(pol, &nsc->mask2);
+ else
+ ret = mpol_ops[pol->mode].create(pol, NULL);
return ret;
}
@@ -620,12 +624,17 @@
{
struct mempolicy *new, *old;
struct mm_struct *mm = current->mm;
+ NODEMASK_SCRATCH(scratch);
int ret;
- new = mpol_new(mode, flags, nodes);
- if (IS_ERR(new))
- return PTR_ERR(new);
+ if (!scratch)
+ return -ENOMEM;
+ new = mpol_new(mode, flags, nodes);
+ if (IS_ERR(new)) {
+ ret = PTR_ERR(new);
+ goto out;
+ }
/*
* prevent changing our mempolicy while show_numa_maps()
* is using it.
@@ -635,13 +644,13 @@
if (mm)
down_write(&mm->mmap_sem);
task_lock(current);
- ret = mpol_set_nodemask(new, nodes);
+ ret = mpol_set_nodemask(new, nodes, scratch);
if (ret) {
task_unlock(current);
if (mm)
up_write(&mm->mmap_sem);
mpol_put(new);
- return ret;
+ goto out;
}
old = current->mempolicy;
current->mempolicy = new;
@@ -654,7 +663,10 @@
up_write(&mm->mmap_sem);
mpol_put(old);
- return 0;
+ ret = 0;
+out:
+ NODEMASK_SCRATCH_FREE(scratch);
+ return ret;
}
/*
@@ -1014,12 +1026,20 @@
if (err)
return err;
}
- down_write(&mm->mmap_sem);
- task_lock(current);
- err = mpol_set_nodemask(new, nmask);
- task_unlock(current);
+ {
+ NODEMASK_SCRATCH(scratch);
+ if (scratch) {
+ down_write(&mm->mmap_sem);
+ task_lock(current);
+ err = mpol_set_nodemask(new, nmask, scratch);
+ task_unlock(current);
+ if (err)
+ up_write(&mm->mmap_sem);
+ } else
+ err = -ENOMEM;
+ NODEMASK_SCRATCH_FREE(scratch);
+ }
if (err) {
- up_write(&mm->mmap_sem);
mpol_put(new);
return err;
}
@@ -1891,6 +1911,7 @@
* Install non-NULL @mpol in inode's shared policy rb-tree.
* On entry, the current task has a reference on a non-NULL @mpol.
* This must be released on exit.
+ * This is called at get_inode() calls and we can use GFP_KERNEL.
*/
void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol)
{
@@ -1902,19 +1923,24 @@
if (mpol) {
struct vm_area_struct pvma;
struct mempolicy *new;
+ NODEMASK_SCRATCH(scratch);
+ if (!scratch)
+ return;
/* contextualize the tmpfs mount point mempolicy */
new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
if (IS_ERR(new)) {
mpol_put(mpol); /* drop our ref on sb mpol */
+ NODEMASK_SCRATCH_FREE(scratch);
return; /* no valid nodemask intersection */
}
task_lock(current);
- ret = mpol_set_nodemask(new, &mpol->w.user_nodemask);
+ ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
task_unlock(current);
mpol_put(mpol); /* drop our ref on sb mpol */
if (ret) {
+ NODEMASK_SCRATCH_FREE(scratch);
mpol_put(new);
return;
}
@@ -1924,6 +1950,7 @@
pvma.vm_end = TASK_SIZE; /* policy covers entire file */
mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
mpol_put(new); /* drop initial ref */
+ NODEMASK_SCRATCH_FREE(scratch);
}
}
@@ -2140,13 +2167,18 @@
err = 1;
else {
int ret;
-
- task_lock(current);
- ret = mpol_set_nodemask(new, &nodes);
- task_unlock(current);
- if (ret)
+ NODEMASK_SCRATCH(scratch);
+ if (scratch) {
+ task_lock(current);
+ ret = mpol_set_nodemask(new, &nodes, scratch);
+ task_unlock(current);
+ } else
+ ret = -ENOMEM;
+ NODEMASK_SCRATCH_FREE(scratch);
+ if (ret) {
err = 1;
- else if (no_context) {
+ mpol_put(new);
+ } else if (no_context) {
/* save for contextualization */
new->w.user_nodemask = nodes;
}
diff --git a/mm/mempool.c b/mm/mempool.c
index a46eb1b..32e75d4 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -303,14 +303,14 @@
*/
void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data)
{
- size_t size = (size_t)(long)pool_data;
+ size_t size = (size_t)pool_data;
return kmalloc(size, gfp_mask);
}
EXPORT_SYMBOL(mempool_kmalloc);
void *mempool_kzalloc(gfp_t gfp_mask, void *pool_data)
{
- size_t size = (size_t) pool_data;
+ size_t size = (size_t)pool_data;
return kzalloc(size, gfp_mask);
}
EXPORT_SYMBOL(mempool_kzalloc);
diff --git a/mm/nommu.c b/mm/nommu.c
index 2fd2ad5..53cab10 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -173,8 +173,8 @@
}
int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int flags,
- struct page **pages, struct vm_area_struct **vmas)
+ unsigned long start, int nr_pages, int flags,
+ struct page **pages, struct vm_area_struct **vmas)
{
struct vm_area_struct *vma;
unsigned long vm_flags;
@@ -189,7 +189,7 @@
vm_flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
- for (i = 0; i < len; i++) {
+ for (i = 0; i < nr_pages; i++) {
vma = find_vma(mm, start);
if (!vma)
goto finish_or_fault;
@@ -224,7 +224,7 @@
* - don't permit access to VMAs that don't support it, such as I/O mappings
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
int flags = 0;
@@ -234,12 +234,31 @@
if (force)
flags |= GUP_FLAGS_FORCE;
- return __get_user_pages(tsk, mm,
- start, len, flags,
- pages, vmas);
+ return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
}
EXPORT_SYMBOL(get_user_pages);
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+ unsigned long *pfn)
+{
+ if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+ return -EINVAL;
+
+ *pfn = address >> PAGE_SHIFT;
+ return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
DEFINE_RWLOCK(vmlist_lock);
struct vm_struct *vmlist;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7b0dcea..81627eb 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -541,8 +541,11 @@
* filesystems (i.e. NFS) in which data may have been
* written to the server's write cache, but has not yet
* been flushed to permanent storage.
+ * Only move pages to writeback if this bdi is over its
+ * threshold otherwise wait until the disk writes catch
+ * up.
*/
- if (bdi_nr_reclaimable) {
+ if (bdi_nr_reclaimable > bdi_thresh) {
writeback_inodes(&wbc);
pages_written += write_chunk - wbc.nr_to_write;
get_dirty_limits(&background_thresh, &dirty_thresh,
@@ -572,7 +575,7 @@
if (pages_written >= write_chunk)
break; /* We've done our duty */
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
if (bdi_nr_reclaimable + bdi_nr_writeback < bdi_thresh &&
@@ -666,7 +669,7 @@
if (global_page_state(NR_UNSTABLE_NFS) +
global_page_state(NR_WRITEBACK) <= dirty_thresh)
break;
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* The caller might hold locks which can prevent IO completion
@@ -712,7 +715,7 @@
if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
/* Wrote less than expected */
if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
else
break;
}
@@ -784,7 +787,7 @@
writeback_inodes(&wbc);
if (wbc.nr_to_write > 0) {
if (wbc.encountered_congestion || wbc.more_io)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
else
break; /* All the old data is written */
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5d714f8..d052abb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -882,7 +882,7 @@
*/
static int rmqueue_bulk(struct zone *zone, unsigned int order,
unsigned long count, struct list_head *list,
- int migratetype)
+ int migratetype, int cold)
{
int i;
@@ -901,7 +901,10 @@
* merge IO requests if the physical pages are ordered
* properly.
*/
- list_add(&page->lru, list);
+ if (likely(cold == 0))
+ list_add(&page->lru, list);
+ else
+ list_add_tail(&page->lru, list);
set_page_private(page, migratetype);
list = &page->lru;
}
@@ -1119,7 +1122,8 @@
local_irq_save(flags);
if (!pcp->count) {
pcp->count = rmqueue_bulk(zone, 0,
- pcp->batch, &pcp->list, migratetype);
+ pcp->batch, &pcp->list,
+ migratetype, cold);
if (unlikely(!pcp->count))
goto failed;
}
@@ -1138,7 +1142,8 @@
/* Allocate more to the pcp list if necessary */
if (unlikely(&page->lru == &pcp->list)) {
pcp->count += rmqueue_bulk(zone, 0,
- pcp->batch, &pcp->list, migratetype);
+ pcp->batch, &pcp->list,
+ migratetype, cold);
page = list_entry(pcp->list.next, struct page, lru);
}
@@ -1666,7 +1671,7 @@
preferred_zone, migratetype);
if (!page && gfp_mask & __GFP_NOFAIL)
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
} while (!page && (gfp_mask & __GFP_NOFAIL));
return page;
@@ -1740,8 +1745,10 @@
* be using allocators in order of preference for an area that is
* too large.
*/
- if (WARN_ON_ONCE(order >= MAX_ORDER))
+ if (order >= MAX_ORDER) {
+ WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
return NULL;
+ }
/*
* GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
@@ -1789,6 +1796,10 @@
if (p->flags & PF_MEMALLOC)
goto nopage;
+ /* Avoid allocations with no watermarks from looping endlessly */
+ if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
+ goto nopage;
+
/* Try direct reclaim and then allocating */
page = __alloc_pages_direct_reclaim(gfp_mask, order,
zonelist, high_zoneidx,
@@ -1831,7 +1842,7 @@
pages_reclaimed += did_some_progress;
if (should_alloc_retry(gfp_mask, order, pages_reclaimed)) {
/* Wait for some write requests to complete then retry */
- congestion_wait(WRITE, HZ/50);
+ congestion_wait(BLK_RW_ASYNC, HZ/50);
goto rebalance;
}
@@ -1983,7 +1994,7 @@
unsigned long alloc_end = addr + (PAGE_SIZE << order);
unsigned long used = addr + PAGE_ALIGN(size);
- split_page(virt_to_page(addr), order);
+ split_page(virt_to_page((void *)addr), order);
while (used < alloc_end) {
free_page(used);
used += PAGE_SIZE;
@@ -4032,6 +4043,8 @@
int i, nid;
unsigned long usable_startpfn;
unsigned long kernelcore_node, kernelcore_remaining;
+ /* save the state before borrow the nodemask */
+ nodemask_t saved_node_state = node_states[N_HIGH_MEMORY];
unsigned long totalpages = early_calculate_totalpages();
int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]);
@@ -4059,7 +4072,7 @@
/* If kernelcore was not specified, there is no ZONE_MOVABLE */
if (!required_kernelcore)
- return;
+ goto out;
/* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */
find_usable_zone_for_movable();
@@ -4158,6 +4171,10 @@
for (nid = 0; nid < MAX_NUMNODES; nid++)
zone_movable_pfn[nid] =
roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
+
+out:
+ /* restore the node_state */
+ node_states[N_HIGH_MEMORY] = saved_node_state;
}
/* Any regular memory on that node ? */
@@ -4242,11 +4259,6 @@
early_node_map[i].start_pfn,
early_node_map[i].end_pfn);
- /*
- * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init
- * that node_mask, clear it at first
- */
- nodes_clear(node_states[N_HIGH_MEMORY]);
/* Initialise every node */
mminit_verify_pageflags_layout();
setup_nr_node_ids();
@@ -4744,8 +4756,10 @@
* some pages at the end of hash table which
* alloc_pages_exact() automatically does
*/
- if (get_order(size) < MAX_ORDER)
+ if (get_order(size) < MAX_ORDER) {
table = alloc_pages_exact(size, GFP_ATOMIC);
+ kmemleak_alloc(table, size, 1, GFP_ATOMIC);
+ }
}
} while (!table && size > PAGE_SIZE && --log2qty);
@@ -4763,16 +4777,6 @@
if (_hash_mask)
*_hash_mask = (1 << log2qty) - 1;
- /*
- * If hashdist is set, the table allocation is done with __vmalloc()
- * which invokes the kmemleak_alloc() callback. This function may also
- * be called before the slab and kmemleak are initialised when
- * kmemleak simply buffers the request to be executed later
- * (GFP_ATOMIC flag ignored in this case).
- */
- if (!hashdist)
- kmemleak_alloc(table, size, 1, GFP_ATOMIC);
-
return table;
}
diff --git a/mm/percpu.c b/mm/percpu.c
index c0b2c1a..b70f2ac 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -549,14 +549,14 @@
* @chunk: chunk of interest
* @page_start: page index of the first page to unmap
* @page_end: page index of the last page to unmap + 1
- * @flush: whether to flush cache and tlb or not
+ * @flush_tlb: whether to flush tlb or not
*
* For each cpu, unmap pages [@page_start,@page_end) out of @chunk.
* If @flush is true, vcache is flushed before unmapping and tlb
* after.
*/
static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
- bool flush)
+ bool flush_tlb)
{
unsigned int last = num_possible_cpus() - 1;
unsigned int cpu;
@@ -569,9 +569,8 @@
* the whole region at once rather than doing it for each cpu.
* This could be an overkill but is more scalable.
*/
- if (flush)
- flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
- pcpu_chunk_addr(chunk, last, page_end));
+ flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
+ pcpu_chunk_addr(chunk, last, page_end));
for_each_possible_cpu(cpu)
unmap_kernel_range_noflush(
@@ -579,7 +578,7 @@
(page_end - page_start) << PAGE_SHIFT);
/* ditto as flush_cache_vunmap() */
- if (flush)
+ if (flush_tlb)
flush_tlb_kernel_range(pcpu_chunk_addr(chunk, 0, page_start),
pcpu_chunk_addr(chunk, last, page_end));
}
@@ -1234,6 +1233,7 @@
ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
ssize_t dyn_size, ssize_t unit_size)
{
+ size_t chunk_size;
unsigned int cpu;
/* determine parameters and allocate */
@@ -1248,11 +1248,15 @@
} else
pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
- pcpue_ptr = __alloc_bootmem_nopanic(
- num_possible_cpus() * pcpue_unit_size,
- PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
- if (!pcpue_ptr)
+ chunk_size = pcpue_unit_size * num_possible_cpus();
+
+ pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
+ __pa(MAX_DMA_ADDRESS));
+ if (!pcpue_ptr) {
+ pr_warning("PERCPU: failed to allocate %zu bytes for "
+ "embedding\n", chunk_size);
return -ENOMEM;
+ }
/* return the leftover and copy */
for_each_possible_cpu(cpu) {
diff --git a/mm/slab.c b/mm/slab.c
index e74a16e..7b5d4de 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1544,9 +1544,6 @@
}
g_cpucache_up = EARLY;
-
- /* Annotate slab for lockdep -- annotate the malloc caches */
- init_lock_keys();
}
void __init kmem_cache_init_late(void)
@@ -1563,6 +1560,9 @@
/* Done! */
g_cpucache_up = FULL;
+ /* Annotate slab for lockdep -- annotate the malloc caches */
+ init_lock_keys();
+
/*
* Register a cpu startup notifier callback that initializes
* cpu_cache_get for all new cpus
@@ -2547,7 +2547,7 @@
}
if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU))
- synchronize_rcu();
+ rcu_barrier();
__kmem_cache_destroy(cachep);
mutex_unlock(&cache_chain_mutex);
diff --git a/mm/slob.c b/mm/slob.c
index c78742d..9641da3 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -595,6 +595,8 @@
void kmem_cache_destroy(struct kmem_cache *c)
{
kmemleak_free(c);
+ if (c->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
slob_free(c, sizeof(struct kmem_cache));
}
EXPORT_SYMBOL(kmem_cache_destroy);
diff --git a/mm/slub.c b/mm/slub.c
index 819f056..b9f1491 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -21,7 +21,6 @@
#include <linux/kmemcheck.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
-#include <linux/kmemleak.h>
#include <linux/mempolicy.h>
#include <linux/ctype.h>
#include <linux/debugobjects.h>
@@ -2595,6 +2594,8 @@
*/
void kmem_cache_destroy(struct kmem_cache *s)
{
+ if (s->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
down_write(&slub_lock);
s->refcount--;
if (!s->refcount) {
@@ -2833,13 +2834,15 @@
static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
{
struct page *page;
+ void *ptr = NULL;
flags |= __GFP_COMP | __GFP_NOTRACK;
page = alloc_pages_node(node, flags, get_order(size));
if (page)
- return page_address(page);
- else
- return NULL;
+ ptr = page_address(page);
+
+ kmemleak_alloc(ptr, size, 1, flags);
+ return ptr;
}
#ifdef CONFIG_NUMA
@@ -2924,6 +2927,7 @@
page = virt_to_head_page(x);
if (unlikely(!PageSlab(page))) {
BUG_ON(!PageCompound(page));
+ kmemleak_free(x);
put_page(page);
return;
}
diff --git a/mm/swapfile.c b/mm/swapfile.c
index d1ade1a..8ffdc0d 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -753,7 +753,7 @@
if (!bdev) {
if (bdev_p)
- *bdev_p = bdget(sis->bdev->bd_dev);
+ *bdev_p = bdgrab(sis->bdev);
spin_unlock(&swap_lock);
return i;
@@ -765,7 +765,7 @@
struct swap_extent, list);
if (se->start_block == offset) {
if (bdev_p)
- *bdev_p = bdget(sis->bdev->bd_dev);
+ *bdev_p = bdgrab(sis->bdev);
spin_unlock(&swap_lock);
bdput(bdev);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 5415526..dea7abd 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1104,7 +1104,7 @@
*/
if (nr_freed < nr_taken && !current_is_kswapd() &&
lumpy_reclaim) {
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* The attempt at page out may have made some
@@ -1721,7 +1721,7 @@
/* Take a nap, wait for some writeback to complete */
if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
}
/* top priority shrink_zones still had more to do? don't OOM, then */
if (!sc->all_unreclaimable && scanning_global_lru(sc))
@@ -1960,7 +1960,7 @@
* another pass across the zones.
*/
if (total_scanned && priority < DEF_PRIORITY - 2)
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* We do this so kswapd doesn't build up large priorities for
@@ -2233,7 +2233,7 @@
goto out;
if (sc.nr_scanned && prio < DEF_PRIORITY - 2)
- congestion_wait(WRITE, HZ / 10);
+ congestion_wait(BLK_RW_ASYNC, HZ / 10);
}
}
diff --git a/net/9p/client.c b/net/9p/client.c
index dd43a82..787ccdd 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -117,9 +117,6 @@
}
}
- if (!clnt->trans_mod)
- clnt->trans_mod = v9fs_get_default_trans();
-
kfree(options);
return ret;
}
@@ -689,6 +686,9 @@
if (err < 0)
goto error;
+ if (!clnt->trans_mod)
+ clnt->trans_mod = v9fs_get_default_trans();
+
if (clnt->trans_mod == NULL) {
err = -EPROTONOSUPPORT;
P9_DPRINTK(P9_DEBUG_ERROR,
@@ -1098,7 +1098,6 @@
if (data) {
memmove(data, dataptr, count);
- data += count;
}
if (udata) {
@@ -1192,9 +1191,9 @@
err = p9pdu_readf(req->rc, clnt->dotu, "wS", &ignored, ret);
if (err) {
- ret = ERR_PTR(err);
p9pdu_dump(1, req->rc);
- goto free_and_error;
+ p9_free_req(clnt, req);
+ goto error;
}
P9_DPRINTK(P9_DEBUG_9P,
@@ -1211,8 +1210,6 @@
p9_free_req(clnt, req);
return ret;
-free_and_error:
- p9_free_req(clnt, req);
error:
kfree(ret);
return ERR_PTR(err);
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a2a1814..8c2588e 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -735,12 +735,14 @@
if (!*p)
continue;
token = match_token(p, tokens, args);
- r = match_int(&args[0], &option);
- if (r < 0) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "integer field, but no integer?\n");
- ret = r;
- continue;
+ if (token != Opt_err) {
+ r = match_int(&args[0], &option);
+ if (r < 0) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "integer field, but no integer?\n");
+ ret = r;
+ continue;
+ }
}
switch (token) {
case Opt_port:
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 590b839..bfbe137 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -54,6 +54,7 @@
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/if_arp.h>
+#include <linux/smp_lock.h>
#include <linux/termios.h> /* For TIOCOUTQ/INQ */
#include <net/datalink.h>
#include <net/psnap.h>
diff --git a/net/atm/common.c b/net/atm/common.c
index c1c9793..8c4d843 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -92,7 +92,7 @@
static void vcc_def_wakeup(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up(sk->sk_sleep);
read_unlock(&sk->sk_callback_lock);
}
@@ -110,7 +110,7 @@
read_lock(&sk->sk_callback_lock);
if (vcc_writable(sk)) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
@@ -594,7 +594,7 @@
struct atm_vcc *vcc;
unsigned int mask;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
vcc = ATM_SD(sock);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index e50566e..94b3388 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2080,28 +2080,41 @@
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
{
+ int ret;
+
l2cap_load();
hci_register_cb(&rfcomm_cb);
rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
if (IS_ERR(rfcomm_thread)) {
- hci_unregister_cb(&rfcomm_cb);
- return PTR_ERR(rfcomm_thread);
+ ret = PTR_ERR(rfcomm_thread);
+ goto out_thread;
}
if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
BT_ERR("Failed to create RFCOMM info file");
- rfcomm_init_sockets();
+ ret = rfcomm_init_ttys();
+ if (ret)
+ goto out_tty;
-#ifdef CONFIG_BT_RFCOMM_TTY
- rfcomm_init_ttys();
-#endif
+ ret = rfcomm_init_sockets();
+ if (ret)
+ goto out_sock;
BT_INFO("RFCOMM ver %s", VERSION);
return 0;
+
+out_sock:
+ rfcomm_cleanup_ttys();
+out_tty:
+ kthread_stop(rfcomm_thread);
+out_thread:
+ hci_unregister_cb(&rfcomm_cb);
+
+ return ret;
}
static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@
kthread_stop(rfcomm_thread);
-#ifdef CONFIG_BT_RFCOMM_TTY
rfcomm_cleanup_ttys();
-#endif
rfcomm_cleanup_sockets();
}
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 7f48278..0b85e81 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -1132,7 +1132,7 @@
return err;
}
-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
{
class_remove_file(bt_class, &class_attr_rfcomm);
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 9aac521..e1241c7 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -93,7 +93,7 @@
unregister_pernet_subsys(&br_net_ops);
- synchronize_net();
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
br_netfilter_fini();
#if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 8a96672..eb404dc 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -424,7 +424,7 @@
err2:
br_fdb_delete_by_port(br, p, 1);
err1:
- kobject_del(&p->kobj);
+ kobject_put(&p->kobj);
err0:
dev_set_promiscuity(dev, -1);
put_back:
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 95d7f32..72720c7 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -75,6 +75,7 @@
MODULE_DESCRIPTION("PF_CAN broadcast manager protocol");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_ALIAS("can-proto-2");
/* easy access to can_frame payload */
static inline u64 GET_U64(const struct can_frame *cp)
@@ -1469,6 +1470,9 @@
bo->ifindex = 0;
}
+ sock_orphan(sk);
+ sock->sk = NULL;
+
release_sock(sk);
sock_put(sk);
diff --git a/net/can/raw.c b/net/can/raw.c
index 6aa154e..f4cc445 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -62,6 +62,7 @@
MODULE_DESCRIPTION("PF_CAN raw protocol");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Urs Thuermann <urs.thuermann@volkswagen.de>");
+MODULE_ALIAS("can-proto-1");
#define MASK_ALL 0
@@ -306,6 +307,9 @@
ro->bound = 0;
ro->count = 0;
+ sock_orphan(sk);
+ sock->sk = NULL;
+
release_sock(sk);
sock_put(sk);
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 58abee1..b0fe692 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -712,7 +712,7 @@
struct sock *sk = sock->sk;
unsigned int mask;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* exceptional events? */
diff --git a/net/core/dev.c b/net/core/dev.c
index 60b5728..6a94475 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2823,9 +2823,11 @@
* move the instance around on the list at-will.
*/
if (unlikely(work == weight)) {
- if (unlikely(napi_disable_pending(n)))
- __napi_complete(n);
- else
+ if (unlikely(napi_disable_pending(n))) {
+ local_irq_enable();
+ napi_complete(n);
+ local_irq_disable();
+ } else
list_move_tail(&n->poll_list, list);
}
@@ -3863,10 +3865,12 @@
ASSERT_RTNL();
+ netif_addr_lock_bh(dev);
err = __hw_addr_del(&dev->uc, addr, dev->addr_len,
NETDEV_HW_ADDR_T_UNICAST);
if (!err)
__dev_set_rx_mode(dev);
+ netif_addr_unlock_bh(dev);
return err;
}
EXPORT_SYMBOL(dev_unicast_delete);
@@ -3887,10 +3891,12 @@
ASSERT_RTNL();
+ netif_addr_lock_bh(dev);
err = __hw_addr_add(&dev->uc, addr, dev->addr_len,
NETDEV_HW_ADDR_T_UNICAST);
if (!err)
__dev_set_rx_mode(dev);
+ netif_addr_unlock_bh(dev);
return err;
}
EXPORT_SYMBOL(dev_unicast_add);
@@ -3947,7 +3953,8 @@
* @from: source device
*
* Add newly added addresses to the destination device and release
- * addresses that have no users left.
+ * addresses that have no users left. The source device must be
+ * locked by netif_tx_lock_bh.
*
* This function is intended to be called from the dev->set_rx_mode
* function of layered software devices.
@@ -3956,14 +3963,14 @@
{
int err = 0;
- ASSERT_RTNL();
-
if (to->addr_len != from->addr_len)
return -EINVAL;
+ netif_addr_lock_bh(to);
err = __hw_addr_sync(&to->uc, &from->uc, to->addr_len);
if (!err)
__dev_set_rx_mode(to);
+ netif_addr_unlock_bh(to);
return err;
}
EXPORT_SYMBOL(dev_unicast_sync);
@@ -3979,27 +3986,27 @@
*/
void dev_unicast_unsync(struct net_device *to, struct net_device *from)
{
- ASSERT_RTNL();
-
if (to->addr_len != from->addr_len)
return;
+ netif_addr_lock_bh(from);
+ netif_addr_lock(to);
__hw_addr_unsync(&to->uc, &from->uc, to->addr_len);
__dev_set_rx_mode(to);
+ netif_addr_unlock(to);
+ netif_addr_unlock_bh(from);
}
EXPORT_SYMBOL(dev_unicast_unsync);
static void dev_unicast_flush(struct net_device *dev)
{
- /* rtnl_mutex must be held here */
-
+ netif_addr_lock_bh(dev);
__hw_addr_flush(&dev->uc);
+ netif_addr_unlock_bh(dev);
}
static void dev_unicast_init(struct net_device *dev)
{
- /* rtnl_mutex must be held here */
-
__hw_addr_init(&dev->uc);
}
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index b7292a2..1972830 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -488,7 +488,7 @@
*/
ng->len = id;
- memcpy(&ng->ptr, &old_ng->ptr, old_ng->len);
+ memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
rcu_assign_pointer(net->gen, ng);
call_rcu(&old_ng->rcu, net_generic_release);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 9675f31..df30feb 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -740,7 +740,7 @@
np->name);
break;
}
- cond_resched();
+ msleep(1);
}
/* If carrier appears to come up instantly, we don't
diff --git a/net/core/sock.c b/net/core/sock.c
index b0ba569..bbb25be7 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -631,7 +631,7 @@
case SO_TIMESTAMPING:
if (val & ~SOF_TIMESTAMPING_MASK) {
- ret = EINVAL;
+ ret = -EINVAL;
break;
}
sock_valbool_flag(sk, SOCK_TIMESTAMPING_TX_HARDWARE,
@@ -919,13 +919,19 @@
af_family_keys + sk->sk_family);
}
+/*
+ * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet,
+ * even temporarly, because of RCU lookups. sk_node should also be left as is.
+ */
static void sock_copy(struct sock *nsk, const struct sock *osk)
{
#ifdef CONFIG_SECURITY_NETWORK
void *sptr = nsk->sk_security;
#endif
-
- memcpy(nsk, osk, osk->sk_prot->obj_size);
+ BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
+ sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+ memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
+ osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
#ifdef CONFIG_SECURITY_NETWORK
nsk->sk_security = sptr;
security_sk_clone(osk, nsk);
@@ -939,8 +945,23 @@
struct kmem_cache *slab;
slab = prot->slab;
- if (slab != NULL)
- sk = kmem_cache_alloc(slab, priority);
+ if (slab != NULL) {
+ sk = kmem_cache_alloc(slab, priority & ~__GFP_ZERO);
+ if (!sk)
+ return sk;
+ if (priority & __GFP_ZERO) {
+ /*
+ * caches using SLAB_DESTROY_BY_RCU should let
+ * sk_node.next un-modified. Special care is taken
+ * when initializing object to zero.
+ */
+ if (offsetof(struct sock, sk_node.next) != 0)
+ memset(sk, 0, offsetof(struct sock, sk_node.next));
+ memset(&sk->sk_node.pprev, 0,
+ prot->obj_size - offsetof(struct sock,
+ sk_node.pprev));
+ }
+ }
else
sk = kmalloc(prot->obj_size, priority);
@@ -1125,6 +1146,11 @@
newsk->sk_err = 0;
newsk->sk_priority = 0;
+ /*
+ * Before updating sk_refcnt, we must commit prior changes to memory
+ * (Documentation/RCU/rculist_nulls.txt for details)
+ */
+ smp_wmb();
atomic_set(&newsk->sk_refcnt, 2);
/*
@@ -1715,7 +1741,7 @@
static void sock_def_wakeup(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_all(sk->sk_sleep);
read_unlock(&sk->sk_callback_lock);
}
@@ -1723,7 +1749,7 @@
static void sock_def_error_report(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_poll(sk->sk_sleep, POLLERR);
sk_wake_async(sk, SOCK_WAKE_IO, POLL_ERR);
read_unlock(&sk->sk_callback_lock);
@@ -1732,7 +1758,7 @@
static void sock_def_readable(struct sock *sk, int len)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN |
POLLRDNORM | POLLRDBAND);
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
@@ -1747,7 +1773,7 @@
* progress. --DaveM
*/
if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_sync_poll(sk->sk_sleep, POLLOUT |
POLLWRNORM | POLLWRBAND);
@@ -1840,6 +1866,11 @@
sk->sk_stamp = ktime_set(-1L, 0);
+ /*
+ * Before updating sk_refcnt, we must commit prior changes to memory
+ * (Documentation/RCU/rculist_nulls.txt for details)
+ */
+ smp_wmb();
atomic_set(&sk->sk_refcnt, 1);
atomic_set(&sk->sk_wmem_alloc, 1);
atomic_set(&sk->sk_drops, 0);
diff --git a/net/dccp/output.c b/net/dccp/output.c
index c0e88c1..c96119f 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -196,7 +196,7 @@
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible(sk->sk_sleep);
/* Should agree with poll, otherwise some programs break */
if (sock_writeable(sk))
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 314a1b5..3281013 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -311,7 +311,7 @@
unsigned int mask;
struct sock *sk = sock->sk;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
if (sk->sk_state == DCCP_LISTEN)
return inet_csk_listen_poll(sk);
@@ -1066,7 +1066,7 @@
(dccp_hashinfo.ehash_size - 1))
dccp_hashinfo.ehash_size--;
dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
- __get_free_pages(GFP_ATOMIC, ehash_order);
+ __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
} while (!dccp_hashinfo.ehash && --ehash_order > 0);
if (!dccp_hashinfo.ehash) {
@@ -1091,7 +1091,7 @@
bhash_order > 0)
continue;
dccp_hashinfo.bhash = (struct inet_bind_hashbucket *)
- __get_free_pages(GFP_ATOMIC, bhash_order);
+ __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, bhash_order);
} while (!dccp_hashinfo.bhash && --bhash_order >= 0);
if (!dccp_hashinfo.bhash) {
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index d351b8d..77d4028 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -2413,6 +2413,8 @@
proc_net_remove(&init_net, "decnet");
proto_unregister(&dn_proto);
+
+ rcu_barrier_bh(); /* Wait for completion of call_rcu_bh()'s */
}
module_exit(decnet_exit);
#endif
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 4e4d8b5..efe661a 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -418,7 +418,7 @@
int i;
for (i = 0; i < 10; i++) {
- ret = REG_READ(REG_GLOBAL2, 0x1d);
+ ret = REG_READ(REG_GLOBAL, 0x1d);
if ((ret & 0x8000) == 0)
return 0;
}
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index 105ad10..27eda9f 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -276,6 +276,9 @@
else
return NULL;
+ if (!dev)
+ return NULL;
+
if (dev->type != ARPHRD_IEEE802154) {
dev_put(dev);
return NULL;
@@ -521,3 +524,6 @@
}
module_exit(ieee802154_nl_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ieee 802.15.4 configuration interface");
+
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 8a3881e..090e999 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -801,11 +801,8 @@
* cache.
*/
- /*
- * Special case: IPv4 duplicate address detection packet (RFC2131)
- * and Gratuitous ARP/ARP Announce. (RFC3927, Section 2.4)
- */
- if (sip == 0 || tip == sip) {
+ /* Special case: IPv4 duplicate address detection packet (RFC2131) */
+ if (sip == 0) {
if (arp->ar_op == htons(ARPOP_REQUEST) &&
inet_addr_type(net, tip) == RTN_LOCAL &&
!arp_ignore(in_dev, sip, tip))
@@ -1307,7 +1304,9 @@
hbuffer[k++] = hex_asc_lo(n->ha[j]);
hbuffer[k++] = ':';
}
- hbuffer[--k] = 0;
+ if (k != 0)
+ --k;
+ hbuffer[k] = 0;
#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
}
#endif
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 012cf5a..63c2fa7 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -316,8 +316,8 @@
static const int halve_threshold = 25;
static const int inflate_threshold = 50;
-static const int halve_threshold_root = 8;
-static const int inflate_threshold_root = 15;
+static const int halve_threshold_root = 15;
+static const int inflate_threshold_root = 25;
static void __alias_free_mem(struct rcu_head *head)
@@ -1021,6 +1021,9 @@
(struct node *)tn, wasfull);
tp = node_parent((struct node *) tn);
+ if (!tp)
+ rcu_assign_pointer(t->trie, (struct node *)tn);
+
tnode_free_flush();
if (!tp)
break;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 44e2a3d..cb4a0f4 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -735,10 +735,10 @@
}
tos = tiph->tos;
- if (tos&1) {
+ if (tos == 1) {
+ tos = 0;
if (skb->protocol == htons(ETH_P_IP))
tos = old_iph->tos;
- tos &= ~1;
}
{
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 490ce20..db46b4b 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -440,6 +440,9 @@
/* Remove any debris in the socket control block */
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
+ /* Must drop socket now because of tproxy. */
+ skb_orphan(skb);
+
return NF_HOOK(PF_INET, NF_INET_PRE_ROUTING, skb, dev, NULL,
ip_rcv_finish);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 2470262..7d08210 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1243,7 +1243,6 @@
skb->len += tmp_skb->len;
skb->data_len += tmp_skb->len;
skb->truesize += tmp_skb->truesize;
- __sock_put(tmp_skb->sk);
tmp_skb->destructor = NULL;
tmp_skb->sk = NULL;
}
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 155c008..09172a6 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -191,7 +191,8 @@
ct, ctinfo);
/* Tell TCP window tracking about seq change */
nf_conntrack_tcp_update(skb, ip_hdrlen(skb),
- ct, CTINFO2DIR(ctinfo));
+ ct, CTINFO2DIR(ctinfo),
+ (int)rep_len - (int)match_len);
nf_conntrack_event_cache(IPCT_NATSEQADJ, ct);
}
@@ -377,6 +378,7 @@
struct tcphdr *tcph;
int dir;
__be32 newseq, newack;
+ s16 seqoff, ackoff;
struct nf_conn_nat *nat = nfct_nat(ct);
struct nf_nat_seq *this_way, *other_way;
@@ -390,15 +392,18 @@
tcph = (void *)skb->data + ip_hdrlen(skb);
if (after(ntohl(tcph->seq), this_way->correction_pos))
- newseq = htonl(ntohl(tcph->seq) + this_way->offset_after);
+ seqoff = this_way->offset_after;
else
- newseq = htonl(ntohl(tcph->seq) + this_way->offset_before);
+ seqoff = this_way->offset_before;
if (after(ntohl(tcph->ack_seq) - other_way->offset_before,
other_way->correction_pos))
- newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_after);
+ ackoff = other_way->offset_after;
else
- newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_before);
+ ackoff = other_way->offset_before;
+
+ newseq = htonl(ntohl(tcph->seq) + seqoff);
+ newack = htonl(ntohl(tcph->ack_seq) - ackoff);
inet_proto_csum_replace4(&tcph->check, skb, tcph->seq, newseq, 0);
inet_proto_csum_replace4(&tcph->check, skb, tcph->ack_seq, newack, 0);
@@ -413,7 +418,7 @@
if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo))
return 0;
- nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir);
+ nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff);
return 1;
}
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 17b89c5..9114524 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -339,7 +339,7 @@
struct sock *sk = sock->sk;
struct tcp_sock *tp = tcp_sk(sk);
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
if (sk->sk_state == TCP_LISTEN)
return inet_csk_listen_poll(sk);
@@ -903,13 +903,17 @@
iov++;
while (seglen > 0) {
- int copy;
+ int copy = 0;
+ int max = size_goal;
skb = tcp_write_queue_tail(sk);
+ if (tcp_send_head(sk)) {
+ if (skb->ip_summed == CHECKSUM_NONE)
+ max = mss_now;
+ copy = max - skb->len;
+ }
- if (!tcp_send_head(sk) ||
- (copy = size_goal - skb->len) <= 0) {
-
+ if (copy <= 0) {
new_segment:
/* Allocate new segment. If the interface is SG,
* allocate skb fitting to single page.
@@ -930,6 +934,7 @@
skb_entail(sk, skb);
copy = size_goal;
+ max = size_goal;
}
/* Try to append data to the end of skb. */
@@ -1028,7 +1033,7 @@
if ((seglen -= copy) == 0 && iovlen == 0)
goto out;
- if (skb->len < size_goal || (flags & MSG_OOB))
+ if (skb->len < max || (flags & MSG_OOB))
continue;
if (forced_push(tp)) {
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 5a1ca26..6d88219 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1160,6 +1160,7 @@
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
.md5_lookup = tcp_v4_reqsk_md5_lookup,
+ .calc_md5_hash = tcp_v4_md5_hash_skb,
};
#endif
@@ -1373,7 +1374,7 @@
*/
char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
if (newkey != NULL)
- tcp_v4_md5_do_add(newsk, inet_sk(sk)->daddr,
+ tcp_v4_md5_do_add(newsk, newinet->daddr,
newkey, key->keylen);
newsk->sk_route_caps &= ~NETIF_F_GSO_MASK;
}
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 43bbba7..f8d67cc 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -128,7 +128,8 @@
goto kill_with_rst;
/* Dup ACK? */
- if (!after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
+ if (!th->ack ||
+ !after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq) {
inet_twsk_put(tw);
return TCP_TW_SUCCESS;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 416fc4c..bd62712 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -725,7 +725,8 @@
static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb,
unsigned int mss_now)
{
- if (skb->len <= mss_now || !sk_can_gso(sk)) {
+ if (skb->len <= mss_now || !sk_can_gso(sk) ||
+ skb->ip_summed == CHECKSUM_NONE) {
/* Avoid the costly divide in the normal
* non-TSO case.
*/
@@ -2260,7 +2261,7 @@
#ifdef CONFIG_TCP_MD5SIG
/* Okay, we have all we need - do the md5 hash if needed */
if (md5) {
- tp->af_specific->calc_md5_hash(md5_hash_location,
+ tcp_rsk(req)->af_specific->calc_md5_hash(md5_hash_location,
md5, NULL, req, skb);
}
#endif
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 60d918c..0071ee6 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -136,7 +136,8 @@
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
- if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
+ if (xprth + 4 < skb->data ||
+ pskb_may_pull(skb, xprth + 4 - skb->data)) {
__be16 *ports = (__be16 *)xprth;
fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8c1e86a..43b3c9f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1916,8 +1916,32 @@
update_lft = 1;
else if (stored_lft <= MIN_VALID_LIFETIME) {
/* valid_lft <= stored_lft is always true */
- /* XXX: IPsec */
- update_lft = 0;
+ /*
+ * RFC 4862 Section 5.5.3e:
+ * "Note that the preferred lifetime of
+ * the corresponding address is always
+ * reset to the Preferred Lifetime in
+ * the received Prefix Information
+ * option, regardless of whether the
+ * valid lifetime is also reset or
+ * ignored."
+ *
+ * So if the preferred lifetime in
+ * this advertisement is different
+ * than what we have stored, but the
+ * valid lifetime is invalid, just
+ * reset prefered_lft.
+ *
+ * We must set the valid lifetime
+ * to the stored lifetime since we'll
+ * be updating the timestamp below,
+ * else we'll set it back to the
+ * minumum.
+ */
+ if (prefered_lft != ifp->prefered_lft) {
+ valid_lft = stored_lft;
+ update_lft = 1;
+ }
} else {
valid_lft = MIN_VALID_LIFETIME;
if (valid_lft < prefered_lft)
@@ -3085,7 +3109,7 @@
spin_unlock(&ifp->lock);
continue;
} else if (age >= ifp->prefered_lft) {
- /* jiffies - ifp->tsamp > age >= ifp->prefered_lft */
+ /* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
int deprecate = 0;
if (!(ifp->flags&IFA_F_DEPRECATED)) {
@@ -3362,7 +3386,10 @@
valid = ifa->valid_lft;
if (preferred != INFINITY_LIFE_TIME) {
long tval = (jiffies - ifa->tstamp)/HZ;
- preferred -= tval;
+ if (preferred > tval)
+ preferred -= tval;
+ else
+ preferred = 0;
if (valid != INFINITY_LIFE_TIME)
valid -= tval;
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 85b3d00..caa0278 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -1284,6 +1284,8 @@
proto_unregister(&udplitev6_prot);
proto_unregister(&udpv6_prot);
proto_unregister(&tcpv6_prot);
+
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
module_exit(inet6_exit);
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index c3a07d7..6d6a427 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -139,6 +139,9 @@
rcu_read_unlock();
+ /* Must drop socket now because of tproxy. */
+ skb_orphan(skb);
+
return NF_HOOK(PF_INET6, NF_INET_PRE_ROUTING, skb, dev, NULL,
ip6_rcv_finish);
err:
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 7c76e3d..87f8419 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1484,7 +1484,6 @@
skb->len += tmp_skb->len;
skb->data_len += tmp_skb->len;
skb->truesize += tmp_skb->truesize;
- __sock_put(tmp_skb->sk);
tmp_skb->destructor = NULL;
tmp_skb->sk = NULL;
}
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 68e5230..98b7327d 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1018,6 +1018,7 @@
dev->hard_header_len = LL_MAX_HEADER + sizeof(struct iphdr);
dev->mtu = ETH_DATA_LEN - sizeof(struct iphdr);
dev->flags = IFF_NOARP;
+ dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
dev->iflink = 0;
dev->addr_len = 4;
dev->features |= NETIF_F_NETNS_LOCAL;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 58810c6..d849dd5 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -896,6 +896,7 @@
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
.md5_lookup = tcp_v6_reqsk_md5_lookup,
+ .calc_md5_hash = tcp_v6_md5_hash_skb,
};
#endif
@@ -1441,7 +1442,7 @@
*/
char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
if (newkey != NULL)
- tcp_v6_md5_do_add(newsk, &inet6_sk(sk)->daddr,
+ tcp_v6_md5_do_add(newsk, &newnp->daddr,
newkey, key->keylen);
}
#endif
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index b4b16a4..3a3c677 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -157,7 +157,8 @@
ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
- while (pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
+ while (nh + offset + 1 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
nh = skb_network_header(skb);
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
@@ -177,7 +178,8 @@
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
- if (!onlyproto && pskb_may_pull(skb, nh + offset + 4 - skb->data)) {
+ if (!onlyproto && (nh + offset + 4 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
__be16 *ports = (__be16 *)exthdr;
fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 417b0e3..f1118d9 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -41,6 +41,7 @@
#include <linux/netdevice.h>
#include <linux/uio.h>
#include <linux/skbuff.h>
+#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/string.h>
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index cb762c8..80cf29a 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -45,6 +45,7 @@
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/init.h>
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
index bccf4d0..b001c36 100644
--- a/net/irda/irnet/irnet.h
+++ b/net/irda/irnet/irnet.h
@@ -241,7 +241,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/skbuff.h>
#include <linux/tty.h>
#include <linux/proc_fs.h>
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 6d8ae03..68cbcb1 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -13,6 +13,7 @@
* 2) as a control channel (write commands, read events)
*/
+#include <linux/smp_lock.h>
#include "irnet_ppp.h" /* Private header */
/* Please put other headers in irnet.h - Thanks */
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index ecf4eb2..9cb79f9 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -1453,6 +1453,7 @@
}
/* Dup */
memcpy(new, orig, sizeof(struct tsap_cb));
+ spin_lock_init(&new->lock);
/* We don't need the old instance any more */
spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 6be5f92..49c15b4 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -306,7 +306,7 @@
static void iucv_sock_wake_msglim(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_all(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
read_unlock(&sk->sk_callback_lock);
@@ -1256,7 +1256,7 @@
struct sock *sk = sock->sk;
unsigned int mask = 0;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
if (sk->sk_state == IUCV_LISTEN)
return iucv_accept_poll(sk);
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ba2643a..7836ee9 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -83,6 +83,7 @@
config MAC80211_MESH
bool "Enable mac80211 mesh networking (pre-802.11s) support"
depends on MAC80211 && EXPERIMENTAL
+ depends on BROKEN
---help---
This options enables support of Draft 802.11s mesh networking.
The implementation is based on Draft 1.08 of the Mesh Networking
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index fc712e6..11cf45b 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -494,7 +494,7 @@
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
- synchronize_rcu();
+ rcu_barrier(); /* Wait for RX path and call_rcu()'s */
skb_queue_purge(&sdata->u.mesh.skb_queue);
}
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 003cb47..f49ef28 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -637,7 +637,7 @@
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_preq_queue *preq_node;
- preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_KERNEL);
+ preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
if (!preq_node) {
printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
return;
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 3c72557..479597e 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -175,6 +175,8 @@
int err = 0;
u32 hash_idx;
+ might_sleep();
+
if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
return -ENOTSUPP;
@@ -265,6 +267,7 @@
int err = 0;
u32 hash_idx;
+ might_sleep();
if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
/* never add ourselves as neighbours */
@@ -491,8 +494,10 @@
* @skb: frame to discard
* @sdata: network subif the frame was to be sent through
*
- * If the frame was beign forwarded from another MP, a PERR frame will be sent
- * to the precursor.
+ * If the frame was being forwarded from another MP, a PERR frame will be sent
+ * to the precursor. The precursor's address (i.e. the previous hop) was saved
+ * in addr1 of the frame-to-be-forwarded, and would only be overwritten once
+ * the destination is successfully resolved.
*
* Locking: the function must me called within a rcu_read_lock region
*/
@@ -507,7 +512,7 @@
u8 *ra, *da;
da = hdr->addr3;
- ra = hdr->addr2;
+ ra = hdr->addr1;
mpath = mesh_path_lookup(da, sdata);
if (mpath)
dsn = ++mpath->dsn;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index aca22b0..07e7e41 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -721,7 +721,7 @@
{
struct ieee80211_local *local = (void *) data;
- if (local->quiescing)
+ if (local->quiescing || local->suspended)
return;
queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 7a549f9..5e3d476 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -55,15 +55,6 @@
rcu_read_unlock();
- /* flush again, in case driver queued work */
- flush_workqueue(local->hw.workqueue);
-
- /* stop hardware - this must stop RX */
- if (local->open_count) {
- ieee80211_led_radio(local, false);
- drv_stop(local);
- }
-
/* remove STAs */
spin_lock_irqsave(&local->sta_lock, flags);
list_for_each_entry(sta, &local->sta_list, list) {
@@ -111,7 +102,22 @@
drv_remove_interface(local, &conf);
}
+ /* stop hardware - this must stop RX */
+ if (local->open_count) {
+ ieee80211_led_radio(local, false);
+ drv_stop(local);
+ }
+
+ /*
+ * flush again, in case driver queued work -- it
+ * shouldn't be doing (or cancel everything in the
+ * stop callback) that but better safe than sorry.
+ */
+ flush_workqueue(local->hw.workqueue);
+
local->suspended = true;
+ /* need suspended to be visible before quiescing is false */
+ barrier();
local->quiescing = false;
return 0;
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index b218b98..37771ab 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -66,7 +66,7 @@
for (i = rix; i >= 0; i--)
if (mi->r[i].rix == rix)
break;
- WARN_ON(mi->r[i].rix != rix);
+ WARN_ON(i < 0);
return i;
}
@@ -181,6 +181,9 @@
break;
ndx = rix_to_ndx(mi, ar[i].idx);
+ if (ndx < 0)
+ continue;
+
mi->r[ndx].attempts += ar[i].count;
if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index de5bba7..0936fc2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2453,6 +2453,18 @@
return;
}
+ /*
+ * If we're suspending, it is possible although not too likely
+ * that we'd be receiving frames after having already partially
+ * quiesced the stack. We can't process such frames then since
+ * that might, for example, cause stations to be added or other
+ * driver callbacks be invoked.
+ */
+ if (unlikely(local->quiescing || local->suspended)) {
+ kfree_skb(skb);
+ return;
+ }
+
if (status->flag & RX_FLAG_HT) {
/* rate_idx is MCS index */
if (WARN_ON(status->rate_idx < 0 ||
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index d238a89..3a8922c 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1455,7 +1455,7 @@
monitor_iface = UNKNOWN_ADDRESS;
len_rthdr = ieee80211_get_radiotap_len(skb->data);
- hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
+ hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
hdrlen = ieee80211_hdrlen(hdr->frame_control);
/* check the header is complete in the frame */
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7508f11..b5869b9 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -561,23 +561,38 @@
}
}
- ct = kmem_cache_zalloc(nf_conntrack_cachep, gfp);
+ /*
+ * Do not use kmem_cache_zalloc(), as this cache uses
+ * SLAB_DESTROY_BY_RCU.
+ */
+ ct = kmem_cache_alloc(nf_conntrack_cachep, gfp);
if (ct == NULL) {
pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
atomic_dec(&net->ct.count);
return ERR_PTR(-ENOMEM);
}
-
+ /*
+ * Let ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.next
+ * and ct->tuplehash[IP_CT_DIR_REPLY].hnnode.next unchanged.
+ */
+ memset(&ct->tuplehash[IP_CT_DIR_MAX], 0,
+ sizeof(*ct) - offsetof(struct nf_conn, tuplehash[IP_CT_DIR_MAX]));
spin_lock_init(&ct->lock);
- atomic_set(&ct->ct_general.use, 1);
ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
+ ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.pprev = NULL;
ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
+ ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev = NULL;
/* Don't set timer yet: wait for confirmation */
setup_timer(&ct->timeout, death_by_timeout, (unsigned long)ct);
#ifdef CONFIG_NET_NS
ct->ct_net = net;
#endif
+ /*
+ * changes to lookup keys must be done before setting refcnt to 1
+ */
+ smp_wmb();
+ atomic_set(&ct->ct_general.use, 1);
return ct;
}
EXPORT_SYMBOL_GPL(nf_conntrack_alloc);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index afde8f9..2032dfe 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -617,8 +617,10 @@
void nf_conntrack_expect_fini(struct net *net)
{
exp_proc_remove(net);
- if (net_eq(net, &init_net))
+ if (net_eq(net, &init_net)) {
+ rcu_barrier(); /* Wait for call_rcu() before destroy */
kmem_cache_destroy(nf_ct_expect_cachep);
+ }
nf_ct_free_hashtable(net->ct.expect_hash, net->ct.expect_vmalloc,
nf_ct_expect_hsize);
}
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 4b2c769..fef95be 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -186,6 +186,6 @@
rcu_assign_pointer(nf_ct_ext_types[type->id], NULL);
update_alloc_size(type);
mutex_unlock(&nf_ct_ext_type_mutex);
- synchronize_rcu();
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
EXPORT_SYMBOL_GPL(nf_ct_extend_unregister);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 33fc0a4..97a82ba 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -720,8 +720,8 @@
/* Caller must linearize skb at tcp header. */
void nf_conntrack_tcp_update(const struct sk_buff *skb,
unsigned int dataoff,
- struct nf_conn *ct,
- int dir)
+ struct nf_conn *ct, int dir,
+ s16 offset)
{
const struct tcphdr *tcph = (const void *)skb->data + dataoff;
const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir];
@@ -734,7 +734,7 @@
/*
* We have to worry for the ack in the reply packet only...
*/
- if (after(end, ct->proto.tcp.seen[dir].td_end))
+ if (ct->proto.tcp.seen[dir].td_end + offset == end)
ct->proto.tcp.seen[dir].td_end = end;
ct->proto.tcp.last_end = end;
spin_unlock_bh(&ct->lock);
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 0b7139f..fc58180 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -129,7 +129,7 @@
static inline bool
conntrack_mt_origsrc(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3,
@@ -138,7 +138,7 @@
static inline bool
conntrack_mt_origdst(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3,
@@ -147,7 +147,7 @@
static inline bool
conntrack_mt_replsrc(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3,
@@ -156,7 +156,7 @@
static inline bool
conntrack_mt_repldst(const struct nf_conn *ct,
- const struct xt_conntrack_mtinfo1 *info,
+ const struct xt_conntrack_mtinfo2 *info,
u_int8_t family)
{
return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3,
@@ -164,7 +164,7 @@
}
static inline bool
-ct_proto_port_check(const struct xt_conntrack_mtinfo1 *info,
+ct_proto_port_check(const struct xt_conntrack_mtinfo2 *info,
const struct nf_conn *ct)
{
const struct nf_conntrack_tuple *tuple;
@@ -204,7 +204,7 @@
static bool
conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par)
{
- const struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+ const struct xt_conntrack_mtinfo2 *info = par->matchinfo;
enum ip_conntrack_info ctinfo;
const struct nf_conn *ct;
unsigned int statebit;
@@ -278,6 +278,16 @@
return true;
}
+static bool
+conntrack_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+ const struct xt_conntrack_mtinfo2 *const *info = par->matchinfo;
+ struct xt_match_param newpar = *par;
+
+ newpar.matchinfo = *info;
+ return conntrack_mt(skb, &newpar);
+}
+
static bool conntrack_mt_check(const struct xt_mtchk_param *par)
{
if (nf_ct_l3proto_try_module_get(par->family) < 0) {
@@ -288,11 +298,45 @@
return true;
}
+static bool conntrack_mt_check_v1(const struct xt_mtchk_param *par)
+{
+ struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+ struct xt_conntrack_mtinfo2 *up;
+ int ret = conntrack_mt_check(par);
+
+ if (ret < 0)
+ return ret;
+
+ up = kmalloc(sizeof(*up), GFP_KERNEL);
+ if (up == NULL) {
+ nf_ct_l3proto_module_put(par->family);
+ return -ENOMEM;
+ }
+
+ /*
+ * The strategy here is to minimize the overhead of v1 matching,
+ * by prebuilding a v2 struct and putting the pointer into the
+ * v1 dataspace.
+ */
+ memcpy(up, info, offsetof(typeof(*info), state_mask));
+ up->state_mask = info->state_mask;
+ up->status_mask = info->status_mask;
+ *(void **)info = up;
+ return true;
+}
+
static void conntrack_mt_destroy(const struct xt_mtdtor_param *par)
{
nf_ct_l3proto_module_put(par->family);
}
+static void conntrack_mt_destroy_v1(const struct xt_mtdtor_param *par)
+{
+ struct xt_conntrack_mtinfo2 **info = par->matchinfo;
+ kfree(*info);
+ conntrack_mt_destroy(par);
+}
+
#ifdef CONFIG_COMPAT
struct compat_xt_conntrack_info
{
@@ -363,6 +407,16 @@
.revision = 1,
.family = NFPROTO_UNSPEC,
.matchsize = sizeof(struct xt_conntrack_mtinfo1),
+ .match = conntrack_mt_v1,
+ .checkentry = conntrack_mt_check_v1,
+ .destroy = conntrack_mt_destroy_v1,
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "conntrack",
+ .revision = 2,
+ .family = NFPROTO_UNSPEC,
+ .matchsize = sizeof(struct xt_conntrack_mtinfo2),
.match = conntrack_mt,
.checkentry = conntrack_mt_check,
.destroy = conntrack_mt_destroy,
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 863e409..0f482e2 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -330,7 +330,8 @@
fcount++;
if (info->flags & XT_OSF_LOG)
- nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+ nf_log_packet(p->family, p->hooknum, skb,
+ p->in, p->out, NULL,
"%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n",
f->genre, f->version, f->subtype,
&ip->saddr, ntohs(tcp->source),
@@ -345,7 +346,7 @@
rcu_read_unlock();
if (!fcount && (info->flags & XT_OSF_LOG))
- nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+ nf_log_packet(p->family, p->hooknum, skb, p->in, p->out, NULL,
"Remote OS is not known: %pi4:%u -> %pi4:%u\n",
&ip->saddr, ntohs(tcp->source),
&ip->daddr, ntohs(tcp->dest));
diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index b0e582f..16e6c43 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -151,7 +151,7 @@
addr6 = addr;
mask6 = mask;
map6 = kzalloc(sizeof(*map6), GFP_ATOMIC);
- if (map4 == NULL)
+ if (map6 == NULL)
goto cfg_unlbl_map_add_failure;
map6->type = NETLBL_NLTYPE_UNLABELED;
ipv6_addr_copy(&map6->list.addr, addr6);
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 80a322d..b0d6ddd 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -69,10 +69,27 @@
return NULL;
}
-static void __phonet_device_free(struct phonet_device *pnd)
+static void phonet_device_destroy(struct net_device *dev)
{
- list_del(&pnd->list);
- kfree(pnd);
+ struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
+ struct phonet_device *pnd;
+
+ ASSERT_RTNL();
+
+ spin_lock_bh(&pndevs->lock);
+ pnd = __phonet_get(dev);
+ if (pnd)
+ list_del(&pnd->list);
+ spin_unlock_bh(&pndevs->lock);
+
+ if (pnd) {
+ u8 addr;
+
+ for (addr = find_first_bit(pnd->addrs, 64); addr < 64;
+ addr = find_next_bit(pnd->addrs, 64, 1+addr))
+ phonet_address_notify(RTM_DELADDR, dev, addr);
+ kfree(pnd);
+ }
}
struct net_device *phonet_device_get(struct net *net)
@@ -126,8 +143,10 @@
pnd = __phonet_get(dev);
if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
err = -EADDRNOTAVAIL;
- else if (bitmap_empty(pnd->addrs, 64))
- __phonet_device_free(pnd);
+ else if (bitmap_empty(pnd->addrs, 64)) {
+ list_del(&pnd->list);
+ kfree(pnd);
+ }
spin_unlock_bh(&pndevs->lock);
return err;
}
@@ -181,18 +200,8 @@
{
struct net_device *dev = arg;
- if (what == NETDEV_UNREGISTER) {
- struct phonet_device_list *pndevs;
- struct phonet_device *pnd;
-
- /* Destroy phonet-specific device data */
- pndevs = phonet_device_list(dev_net(dev));
- spin_lock_bh(&pndevs->lock);
- pnd = __phonet_get(dev);
- if (pnd)
- __phonet_device_free(pnd);
- spin_unlock_bh(&pndevs->lock);
- }
+ if (what == NETDEV_UNREGISTER)
+ phonet_device_destroy(dev);
return 0;
}
@@ -218,11 +227,12 @@
static void phonet_exit_net(struct net *net)
{
struct phonet_net *pnn = net_generic(net, phonet_net_id);
- struct phonet_device *pnd, *n;
+ struct net_device *dev;
- list_for_each_entry_safe(pnd, n, &pnn->pndevs.list, list)
- __phonet_device_free(pnd);
-
+ rtnl_lock();
+ for_each_netdev(net, dev)
+ phonet_device_destroy(dev);
+ rtnl_unlock();
kfree(pnn);
}
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index cec4e59..f8b4cee 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -32,7 +32,7 @@
static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
u32 pid, u32 seq, int event);
-static void rtmsg_notify(int event, struct net_device *dev, u8 addr)
+void phonet_address_notify(int event, struct net_device *dev, u8 addr)
{
struct sk_buff *skb;
int err = -ENOBUFS;
@@ -94,7 +94,7 @@
else
err = phonet_address_del(dev, pnaddr);
if (!err)
- rtmsg_notify(nlh->nlmsg_type, dev, pnaddr);
+ phonet_address_notify(nlh->nlmsg_type, dev, pnaddr);
return err;
}
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 79693fe..2fc4a17 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -549,6 +549,10 @@
swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
__rfkill_set_sw_state(rfkill, sw);
+ if (hw)
+ rfkill->state |= RFKILL_BLOCK_HW;
+ else
+ rfkill->state &= ~RFKILL_BLOCK_HW;
spin_unlock_irqrestore(&rfkill->lock, flags);
@@ -648,15 +652,26 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- /*
- * The intention was that userspace can only take control over
- * a given device when/if rfkill-input doesn't control it due
- * to user_claim. Since user_claim is currently unsupported,
- * we never support changing the state from userspace -- this
- * can be implemented again later.
- */
+ struct rfkill *rfkill = to_rfkill(dev);
+ unsigned long state;
+ int err;
- return -EPERM;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ err = strict_strtoul(buf, 0, &state);
+ if (err)
+ return err;
+
+ if (state != RFKILL_USER_STATE_SOFT_BLOCKED &&
+ state != RFKILL_USER_STATE_UNBLOCKED)
+ return -EINVAL;
+
+ mutex_lock(&rfkill_global_mutex);
+ rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED);
+ mutex_unlock(&rfkill_global_mutex);
+
+ return err ?: count;
}
static ssize_t rfkill_claim_show(struct device *dev,
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 6bd8e938..f0a76f6 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -92,23 +92,21 @@
/*
* Convert a ROSE address into text.
*/
-const char *rose2asc(const rose_address *addr)
+char *rose2asc(char *buf, const rose_address *addr)
{
- static char buffer[11];
-
if (addr->rose_addr[0] == 0x00 && addr->rose_addr[1] == 0x00 &&
addr->rose_addr[2] == 0x00 && addr->rose_addr[3] == 0x00 &&
addr->rose_addr[4] == 0x00) {
- strcpy(buffer, "*");
+ strcpy(buf, "*");
} else {
- sprintf(buffer, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
+ sprintf(buf, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
addr->rose_addr[1] & 0xFF,
addr->rose_addr[2] & 0xFF,
addr->rose_addr[3] & 0xFF,
addr->rose_addr[4] & 0xFF);
}
- return buffer;
+ return buf;
}
/*
@@ -1437,7 +1435,7 @@
static int rose_info_show(struct seq_file *seq, void *v)
{
- char buf[11];
+ char buf[11], rsbuf[11];
if (v == SEQ_START_TOKEN)
seq_puts(seq,
@@ -1455,8 +1453,8 @@
devname = dev->name;
seq_printf(seq, "%-10s %-9s ",
- rose2asc(&rose->dest_addr),
- ax2asc(buf, &rose->dest_call));
+ rose2asc(rsbuf, &rose->dest_addr),
+ ax2asc(buf, &rose->dest_call));
if (ax25cmp(&rose->source_call, &null_ax25_address) == 0)
callsign = "??????-?";
@@ -1465,7 +1463,7 @@
seq_printf(seq,
"%-10s %-9s %-5s %3.3X %05d %d %d %d %d %3lu %3lu %3lu %3lu %3lu %3lu/%03lu %5d %5d %ld\n",
- rose2asc(&rose->source_addr),
+ rose2asc(rsbuf, &rose->source_addr),
callsign,
devname,
rose->lci & 0x0FFF,
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index a81066a..9478d9b 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -1104,6 +1104,7 @@
static int rose_node_show(struct seq_file *seq, void *v)
{
+ char rsbuf[11];
int i;
if (v == SEQ_START_TOKEN)
@@ -1112,13 +1113,13 @@
const struct rose_node *rose_node = v;
/* if (rose_node->loopback) {
seq_printf(seq, "%-10s %04d 1 loopback\n",
- rose2asc(&rose_node->address),
- rose_node->mask);
+ rose2asc(rsbuf, &rose_node->address),
+ rose_node->mask);
} else { */
seq_printf(seq, "%-10s %04d %d",
- rose2asc(&rose_node->address),
- rose_node->mask,
- rose_node->count);
+ rose2asc(rsbuf, &rose_node->address),
+ rose_node->mask,
+ rose_node->count);
for (i = 0; i < rose_node->count; i++)
seq_printf(seq, " %05d",
@@ -1267,7 +1268,7 @@
static int rose_route_show(struct seq_file *seq, void *v)
{
- char buf[11];
+ char buf[11], rsbuf[11];
if (v == SEQ_START_TOKEN)
seq_puts(seq,
@@ -1279,7 +1280,7 @@
seq_printf(seq,
"%3.3X %-10s %-9s %05d ",
rose_route->lci1,
- rose2asc(&rose_route->src_addr),
+ rose2asc(rsbuf, &rose_route->src_addr),
ax2asc(buf, &rose_route->src_call),
rose_route->neigh1->number);
else
@@ -1289,10 +1290,10 @@
if (rose_route->neigh2)
seq_printf(seq,
"%3.3X %-10s %-9s %05d\n",
- rose_route->lci2,
- rose2asc(&rose_route->dest_addr),
- ax2asc(buf, &rose_route->dest_call),
- rose_route->neigh2->number);
+ rose_route->lci2,
+ rose2asc(rsbuf, &rose_route->dest_addr),
+ ax2asc(buf, &rose_route->dest_call),
+ rose_route->neigh2->number);
else
seq_puts(seq,
"000 * * 00000\n");
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index eac5e7b..bfe493e 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -63,7 +63,7 @@
_enter("%p", sk);
read_lock(&sk->sk_callback_lock);
if (rxrpc_writable(sk)) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
}
@@ -588,7 +588,7 @@
unsigned int mask;
struct sock *sk = sock->sk;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* the socket is readable if there are any messages waiting on the Rx
diff --git a/net/sctp/output.c b/net/sctp/output.c
index b764114..b94c211 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -407,7 +407,7 @@
}
dst = dst_clone(tp->dst);
skb_dst_set(nskb, dst);
- if (dst)
+ if (!dst)
goto no_route;
/* Build the SCTP header. */
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 35ba035..971890d 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6652,21 +6652,6 @@
finish_wait(sk->sk_sleep, &wait);
}
-static void sctp_sock_rfree_frag(struct sk_buff *skb)
-{
- struct sk_buff *frag;
-
- if (!skb->data_len)
- goto done;
-
- /* Don't forget the fragments. */
- skb_walk_frags(skb, frag)
- sctp_sock_rfree_frag(frag);
-
-done:
- sctp_sock_rfree(skb);
-}
-
static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
{
struct sk_buff *frag;
@@ -6776,7 +6761,6 @@
sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsk->sk_receive_queue);
__skb_queue_tail(&newsk->sk_receive_queue, skb);
sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6807,7 +6791,6 @@
sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsp->pd_lobby);
__skb_queue_tail(queue, skb);
sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6822,15 +6805,11 @@
}
- sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
- sctp_sock_rfree_frag(skb);
+ sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp)
sctp_skb_set_owner_r_frag(skb, newsk);
- }
- sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
- sctp_sock_rfree_frag(skb);
+ sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp)
sctp_skb_set_owner_r_frag(skb, newsk);
- }
/* Set the type of socket to indicate that it is peeled off from the
* original UDP-style socket or created with the accept() call on a
diff --git a/net/socket.c b/net/socket.c
index 791d71a..6d47165 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -736,7 +736,7 @@
if (more)
flags |= MSG_MORE;
- return sock->ops->sendpage(sock, page, offset, size, flags);
+ return kernel_sendpage(sock, page, offset, size, flags);
}
static ssize_t sock_splice_read(struct file *file, loff_t *ppos,
diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile
index db73fd2..9d2fca5 100644
--- a/net/sunrpc/Makefile
+++ b/net/sunrpc/Makefile
@@ -10,7 +10,7 @@
sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \
auth.o auth_null.o auth_unix.o auth_generic.o \
svc.o svcsock.o svcauth.o svcauth_unix.o \
- rpcb_clnt.o timer.o xdr.o \
+ addr.o rpcb_clnt.o timer.o xdr.o \
sunrpc_syms.o cache.o rpc_pipe.o \
svc_xprt.o
sunrpc-$(CONFIG_NFS_V4_1) += backchannel_rqst.o bc_svc.o
diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c
new file mode 100644
index 0000000..22e8fd8
--- /dev/null
+++ b/net/sunrpc/addr.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright 2009, Oracle. All rights reserved.
+ *
+ * Convert socket addresses to presentation addresses and universal
+ * addresses, and vice versa.
+ *
+ * Universal addresses are introduced by RFC 1833 and further refined by
+ * recent RFCs describing NFSv4. The universal address format is part
+ * of the external (network) interface provided by rpcbind version 3
+ * and 4, and by NFSv4. Such an address is a string containing a
+ * presentation format IP address followed by a port number in
+ * "hibyte.lobyte" format.
+ *
+ * IPv6 addresses can also include a scope ID, typically denoted by
+ * a '%' followed by a device name or a non-negative integer. Refer to
+ * RFC 4291, Section 2.2 for details on IPv6 presentation formats.
+ */
+
+#include <net/ipv6.h>
+#include <linux/sunrpc/clnt.h>
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+
+static size_t rpc_ntop6_noscopeid(const struct sockaddr *sap,
+ char *buf, const int buflen)
+{
+ const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+ const struct in6_addr *addr = &sin6->sin6_addr;
+
+ /*
+ * RFC 4291, Section 2.2.2
+ *
+ * Shorthanded ANY address
+ */
+ if (ipv6_addr_any(addr))
+ return snprintf(buf, buflen, "::");
+
+ /*
+ * RFC 4291, Section 2.2.2
+ *
+ * Shorthanded loopback address
+ */
+ if (ipv6_addr_loopback(addr))
+ return snprintf(buf, buflen, "::1");
+
+ /*
+ * RFC 4291, Section 2.2.3
+ *
+ * Special presentation address format for mapped v4
+ * addresses.
+ */
+ if (ipv6_addr_v4mapped(addr))
+ return snprintf(buf, buflen, "::ffff:%pI4",
+ &addr->s6_addr32[3]);
+
+ /*
+ * RFC 4291, Section 2.2.1
+ *
+ * To keep the result as short as possible, especially
+ * since we don't shorthand, we don't want leading zeros
+ * in each halfword, so avoid %pI6.
+ */
+ return snprintf(buf, buflen, "%x:%x:%x:%x:%x:%x:%x:%x",
+ ntohs(addr->s6_addr16[0]), ntohs(addr->s6_addr16[1]),
+ ntohs(addr->s6_addr16[2]), ntohs(addr->s6_addr16[3]),
+ ntohs(addr->s6_addr16[4]), ntohs(addr->s6_addr16[5]),
+ ntohs(addr->s6_addr16[6]), ntohs(addr->s6_addr16[7]));
+}
+
+static size_t rpc_ntop6(const struct sockaddr *sap,
+ char *buf, const size_t buflen)
+{
+ const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+ char scopebuf[IPV6_SCOPE_ID_LEN];
+ size_t len;
+ int rc;
+
+ len = rpc_ntop6_noscopeid(sap, buf, buflen);
+ if (unlikely(len == 0))
+ return len;
+
+ if (!(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_SITELOCAL))
+ return len;
+
+ rc = snprintf(scopebuf, sizeof(scopebuf), "%c%u",
+ IPV6_SCOPE_DELIMITER, sin6->sin6_scope_id);
+ if (unlikely((size_t)rc > sizeof(scopebuf)))
+ return 0;
+
+ len += rc;
+ if (unlikely(len > buflen))
+ return 0;
+
+ strcat(buf, scopebuf);
+ return len;
+}
+
+#else /* !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)) */
+
+static size_t rpc_ntop6_noscopeid(const struct sockaddr *sap,
+ char *buf, const int buflen)
+{
+ return 0;
+}
+
+static size_t rpc_ntop6(const struct sockaddr *sap,
+ char *buf, const size_t buflen)
+{
+ return 0;
+}
+
+#endif /* !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)) */
+
+static int rpc_ntop4(const struct sockaddr *sap,
+ char *buf, const size_t buflen)
+{
+ const struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+
+ return snprintf(buf, buflen, "%pI4", &sin->sin_addr);
+}
+
+/**
+ * rpc_ntop - construct a presentation address in @buf
+ * @sap: socket address
+ * @buf: construction area
+ * @buflen: size of @buf, in bytes
+ *
+ * Plants a %NUL-terminated string in @buf and returns the length
+ * of the string, excluding the %NUL. Otherwise zero is returned.
+ */
+size_t rpc_ntop(const struct sockaddr *sap, char *buf, const size_t buflen)
+{
+ switch (sap->sa_family) {
+ case AF_INET:
+ return rpc_ntop4(sap, buf, buflen);
+ case AF_INET6:
+ return rpc_ntop6(sap, buf, buflen);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rpc_ntop);
+
+static size_t rpc_pton4(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+ u8 *addr = (u8 *)&sin->sin_addr.s_addr;
+
+ if (buflen > INET_ADDRSTRLEN || salen < sizeof(struct sockaddr_in))
+ return 0;
+
+ memset(sap, 0, sizeof(struct sockaddr_in));
+
+ if (in4_pton(buf, buflen, addr, '\0', NULL) == 0)
+ return 0;
+
+ sin->sin_family = AF_INET;
+ return sizeof(struct sockaddr_in);;
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static int rpc_parse_scope_id(const char *buf, const size_t buflen,
+ const char *delim, struct sockaddr_in6 *sin6)
+{
+ char *p;
+ size_t len;
+
+ if ((buf + buflen) == delim)
+ return 1;
+
+ if (*delim != IPV6_SCOPE_DELIMITER)
+ return 0;
+
+ if (!(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_SITELOCAL))
+ return 0;
+
+ len = (buf + buflen) - delim - 1;
+ p = kstrndup(delim + 1, len, GFP_KERNEL);
+ if (p) {
+ unsigned long scope_id = 0;
+ struct net_device *dev;
+
+ dev = dev_get_by_name(&init_net, p);
+ if (dev != NULL) {
+ scope_id = dev->ifindex;
+ dev_put(dev);
+ } else {
+ if (strict_strtoul(p, 10, &scope_id) == 0) {
+ kfree(p);
+ return 0;
+ }
+ }
+
+ kfree(p);
+
+ sin6->sin6_scope_id = scope_id;
+ return 1;
+ }
+
+ return 0;
+}
+
+static size_t rpc_pton6(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+ u8 *addr = (u8 *)&sin6->sin6_addr.in6_u;
+ const char *delim;
+
+ if (buflen > (INET6_ADDRSTRLEN + IPV6_SCOPE_ID_LEN) ||
+ salen < sizeof(struct sockaddr_in6))
+ return 0;
+
+ memset(sap, 0, sizeof(struct sockaddr_in6));
+
+ if (in6_pton(buf, buflen, addr, IPV6_SCOPE_DELIMITER, &delim) == 0)
+ return 0;
+
+ if (!rpc_parse_scope_id(buf, buflen, delim, sin6))
+ return 0;
+
+ sin6->sin6_family = AF_INET6;
+ return sizeof(struct sockaddr_in6);
+}
+#else
+static size_t rpc_pton6(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ return 0;
+}
+#endif
+
+/**
+ * rpc_pton - Construct a sockaddr in @sap
+ * @buf: C string containing presentation format IP address
+ * @buflen: length of presentation address in bytes
+ * @sap: buffer into which to plant socket address
+ * @salen: size of buffer in bytes
+ *
+ * Returns the size of the socket address if successful; otherwise
+ * zero is returned.
+ *
+ * Plants a socket address in @sap and returns the size of the
+ * socket address, if successful. Returns zero if an error
+ * occurred.
+ */
+size_t rpc_pton(const char *buf, const size_t buflen,
+ struct sockaddr *sap, const size_t salen)
+{
+ unsigned int i;
+
+ for (i = 0; i < buflen; i++)
+ if (buf[i] == ':')
+ return rpc_pton6(buf, buflen, sap, salen);
+ return rpc_pton4(buf, buflen, sap, salen);
+}
+EXPORT_SYMBOL_GPL(rpc_pton);
+
+/**
+ * rpc_sockaddr2uaddr - Construct a universal address string from @sap.
+ * @sap: socket address
+ *
+ * Returns a %NUL-terminated string in dynamically allocated memory;
+ * otherwise NULL is returned if an error occurred. Caller must
+ * free the returned string.
+ */
+char *rpc_sockaddr2uaddr(const struct sockaddr *sap)
+{
+ char portbuf[RPCBIND_MAXUADDRPLEN];
+ char addrbuf[RPCBIND_MAXUADDRLEN];
+ unsigned short port;
+
+ switch (sap->sa_family) {
+ case AF_INET:
+ if (rpc_ntop4(sap, addrbuf, sizeof(addrbuf)) == 0)
+ return NULL;
+ port = ntohs(((struct sockaddr_in *)sap)->sin_port);
+ break;
+ case AF_INET6:
+ if (rpc_ntop6_noscopeid(sap, addrbuf, sizeof(addrbuf)) == 0)
+ return NULL;
+ port = ntohs(((struct sockaddr_in6 *)sap)->sin6_port);
+ break;
+ default:
+ return NULL;
+ }
+
+ if (snprintf(portbuf, sizeof(portbuf),
+ ".%u.%u", port >> 8, port & 0xff) > (int)sizeof(portbuf))
+ return NULL;
+
+ if (strlcat(addrbuf, portbuf, sizeof(addrbuf)) > sizeof(addrbuf))
+ return NULL;
+
+ return kstrdup(addrbuf, GFP_KERNEL);
+}
+EXPORT_SYMBOL_GPL(rpc_sockaddr2uaddr);
+
+/**
+ * rpc_uaddr2sockaddr - convert a universal address to a socket address.
+ * @uaddr: C string containing universal address to convert
+ * @uaddr_len: length of universal address string
+ * @sap: buffer into which to plant socket address
+ * @salen: size of buffer
+ *
+ * Returns the size of the socket address if successful; otherwise
+ * zero is returned.
+ */
+size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len,
+ struct sockaddr *sap, const size_t salen)
+{
+ char *c, buf[RPCBIND_MAXUADDRLEN];
+ unsigned long portlo, porthi;
+ unsigned short port;
+
+ if (uaddr_len > sizeof(buf))
+ return 0;
+
+ memcpy(buf, uaddr, uaddr_len);
+
+ buf[uaddr_len] = '\n';
+ buf[uaddr_len + 1] = '\0';
+
+ c = strrchr(buf, '.');
+ if (unlikely(c == NULL))
+ return 0;
+ if (unlikely(strict_strtoul(c + 1, 10, &portlo) != 0))
+ return 0;
+ if (unlikely(portlo > 255))
+ return 0;
+
+ c[0] = '\n';
+ c[1] = '\0';
+
+ c = strrchr(buf, '.');
+ if (unlikely(c == NULL))
+ return 0;
+ if (unlikely(strict_strtoul(c + 1, 10, &porthi) != 0))
+ return 0;
+ if (unlikely(porthi > 255))
+ return 0;
+
+ port = (unsigned short)((porthi << 8) | portlo);
+
+ c[0] = '\0';
+
+ if (rpc_pton(buf, strlen(buf), sap, salen) == 0)
+ return 0;
+
+ switch (sap->sa_family) {
+ case AF_INET:
+ ((struct sockaddr_in *)sap)->sin_port = htons(port);
+ return sizeof(struct sockaddr_in);
+ case AF_INET6:
+ ((struct sockaddr_in6 *)sap)->sin6_port = htons(port);
+ return sizeof(struct sockaddr_in6);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rpc_uaddr2sockaddr);
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 66d458f..fc6a43c 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -89,8 +89,8 @@
static DECLARE_WAIT_QUEUE_HEAD(pipe_version_waitqueue);
static void gss_free_ctx(struct gss_cl_ctx *);
-static struct rpc_pipe_ops gss_upcall_ops_v0;
-static struct rpc_pipe_ops gss_upcall_ops_v1;
+static const struct rpc_pipe_ops gss_upcall_ops_v0;
+static const struct rpc_pipe_ops gss_upcall_ops_v1;
static inline struct gss_cl_ctx *
gss_get_ctx(struct gss_cl_ctx *ctx)
@@ -777,7 +777,7 @@
* that we supported only the old pipe. So we instead create
* the new pipe first.
*/
- gss_auth->dentry[1] = rpc_mkpipe(clnt->cl_dentry,
+ gss_auth->dentry[1] = rpc_mkpipe(clnt->cl_path.dentry,
"gssd",
clnt, &gss_upcall_ops_v1,
RPC_PIPE_WAIT_FOR_OPEN);
@@ -786,7 +786,7 @@
goto err_put_mech;
}
- gss_auth->dentry[0] = rpc_mkpipe(clnt->cl_dentry,
+ gss_auth->dentry[0] = rpc_mkpipe(clnt->cl_path.dentry,
gss_auth->mech->gm_name,
clnt, &gss_upcall_ops_v0,
RPC_PIPE_WAIT_FOR_OPEN);
@@ -1507,7 +1507,7 @@
.crunwrap_resp = gss_unwrap_resp,
};
-static struct rpc_pipe_ops gss_upcall_ops_v0 = {
+static const struct rpc_pipe_ops gss_upcall_ops_v0 = {
.upcall = gss_pipe_upcall,
.downcall = gss_pipe_downcall,
.destroy_msg = gss_pipe_destroy_msg,
@@ -1515,7 +1515,7 @@
.release_pipe = gss_pipe_release,
};
-static struct rpc_pipe_ops gss_upcall_ops_v1 = {
+static const struct rpc_pipe_ops gss_upcall_ops_v1 = {
.upcall = gss_pipe_upcall,
.downcall = gss_pipe_downcall,
.destroy_msg = gss_pipe_destroy_msg,
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 2278a50..2e6a148 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -181,6 +181,11 @@
(*bpp)[-1] = '\n';
}
+static int rsi_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, rsi_request);
+}
+
static int rsi_parse(struct cache_detail *cd,
char *mesg, int mlen)
@@ -270,7 +275,7 @@
.hash_table = rsi_table,
.name = "auth.rpcsec.init",
.cache_put = rsi_put,
- .cache_request = rsi_request,
+ .cache_upcall = rsi_upcall,
.cache_parse = rsi_parse,
.match = rsi_match,
.init = rsi_init,
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index bbd31f1..ade8a7e 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -27,10 +27,12 @@
#include <linux/net.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/pagemap.h>
#include <asm/ioctls.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/cache.h>
#include <linux/sunrpc/stats.h>
+#include <linux/sunrpc/rpc_pipe_fs.h>
#define RPCDBG_FACILITY RPCDBG_CACHE
@@ -175,7 +177,12 @@
}
EXPORT_SYMBOL_GPL(sunrpc_cache_update);
-static int cache_make_upcall(struct cache_detail *detail, struct cache_head *h);
+static int cache_make_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ if (!cd->cache_upcall)
+ return -EINVAL;
+ return cd->cache_upcall(cd, h);
+}
static inline int cache_is_valid(struct cache_detail *detail, struct cache_head *h)
{
@@ -192,6 +199,7 @@
return 0;
}
}
+
/*
* This is the generic cache management routine for all
* the authentication caches.
@@ -297,76 +305,11 @@
static struct cache_detail *current_detail;
static int current_index;
-static const struct file_operations cache_file_operations;
-static const struct file_operations content_file_operations;
-static const struct file_operations cache_flush_operations;
-
static void do_cache_clean(struct work_struct *work);
static DECLARE_DELAYED_WORK(cache_cleaner, do_cache_clean);
-static void remove_cache_proc_entries(struct cache_detail *cd)
+static void sunrpc_init_cache_detail(struct cache_detail *cd)
{
- if (cd->proc_ent == NULL)
- return;
- if (cd->flush_ent)
- remove_proc_entry("flush", cd->proc_ent);
- if (cd->channel_ent)
- remove_proc_entry("channel", cd->proc_ent);
- if (cd->content_ent)
- remove_proc_entry("content", cd->proc_ent);
- cd->proc_ent = NULL;
- remove_proc_entry(cd->name, proc_net_rpc);
-}
-
-#ifdef CONFIG_PROC_FS
-static int create_cache_proc_entries(struct cache_detail *cd)
-{
- struct proc_dir_entry *p;
-
- cd->proc_ent = proc_mkdir(cd->name, proc_net_rpc);
- if (cd->proc_ent == NULL)
- goto out_nomem;
- cd->channel_ent = cd->content_ent = NULL;
-
- p = proc_create_data("flush", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent, &cache_flush_operations, cd);
- cd->flush_ent = p;
- if (p == NULL)
- goto out_nomem;
-
- if (cd->cache_request || cd->cache_parse) {
- p = proc_create_data("channel", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent, &cache_file_operations, cd);
- cd->channel_ent = p;
- if (p == NULL)
- goto out_nomem;
- }
- if (cd->cache_show) {
- p = proc_create_data("content", S_IFREG|S_IRUSR|S_IWUSR,
- cd->proc_ent, &content_file_operations, cd);
- cd->content_ent = p;
- if (p == NULL)
- goto out_nomem;
- }
- return 0;
-out_nomem:
- remove_cache_proc_entries(cd);
- return -ENOMEM;
-}
-#else /* CONFIG_PROC_FS */
-static int create_cache_proc_entries(struct cache_detail *cd)
-{
- return 0;
-}
-#endif
-
-int cache_register(struct cache_detail *cd)
-{
- int ret;
-
- ret = create_cache_proc_entries(cd);
- if (ret)
- return ret;
rwlock_init(&cd->hash_lock);
INIT_LIST_HEAD(&cd->queue);
spin_lock(&cache_list_lock);
@@ -380,11 +323,9 @@
/* start the cleaning process */
schedule_delayed_work(&cache_cleaner, 0);
- return 0;
}
-EXPORT_SYMBOL_GPL(cache_register);
-void cache_unregister(struct cache_detail *cd)
+static void sunrpc_destroy_cache_detail(struct cache_detail *cd)
{
cache_purge(cd);
spin_lock(&cache_list_lock);
@@ -399,7 +340,6 @@
list_del_init(&cd->others);
write_unlock(&cd->hash_lock);
spin_unlock(&cache_list_lock);
- remove_cache_proc_entries(cd);
if (list_empty(&cache_list)) {
/* module must be being unloaded so its safe to kill the worker */
cancel_delayed_work_sync(&cache_cleaner);
@@ -408,7 +348,6 @@
out:
printk(KERN_ERR "nfsd: failed to unregister %s cache\n", cd->name);
}
-EXPORT_SYMBOL_GPL(cache_unregister);
/* clean cache tries to find something to clean
* and cleans it.
@@ -703,18 +642,18 @@
int offset; /* if non-0, we have a refcnt on next request */
};
-static ssize_t
-cache_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
+static ssize_t cache_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *ppos, struct cache_detail *cd)
{
struct cache_reader *rp = filp->private_data;
struct cache_request *rq;
- struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int err;
if (count == 0)
return 0;
- mutex_lock(&queue_io_mutex); /* protect against multiple concurrent
+ mutex_lock(&inode->i_mutex); /* protect against multiple concurrent
* readers on this file */
again:
spin_lock(&queue_lock);
@@ -727,7 +666,7 @@
}
if (rp->q.list.next == &cd->queue) {
spin_unlock(&queue_lock);
- mutex_unlock(&queue_io_mutex);
+ mutex_unlock(&inode->i_mutex);
BUG_ON(rp->offset);
return 0;
}
@@ -774,49 +713,90 @@
}
if (err == -EAGAIN)
goto again;
- mutex_unlock(&queue_io_mutex);
+ mutex_unlock(&inode->i_mutex);
return err ? err : count;
}
-static char write_buf[8192]; /* protected by queue_io_mutex */
-
-static ssize_t
-cache_write(struct file *filp, const char __user *buf, size_t count,
- loff_t *ppos)
+static ssize_t cache_do_downcall(char *kaddr, const char __user *buf,
+ size_t count, struct cache_detail *cd)
{
- int err;
- struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+ ssize_t ret;
- if (count == 0)
- return 0;
- if (count >= sizeof(write_buf))
- return -EINVAL;
-
- mutex_lock(&queue_io_mutex);
-
- if (copy_from_user(write_buf, buf, count)) {
- mutex_unlock(&queue_io_mutex);
+ if (copy_from_user(kaddr, buf, count))
return -EFAULT;
- }
- write_buf[count] = '\0';
- if (cd->cache_parse)
- err = cd->cache_parse(cd, write_buf, count);
- else
- err = -EINVAL;
+ kaddr[count] = '\0';
+ ret = cd->cache_parse(cd, kaddr, count);
+ if (!ret)
+ ret = count;
+ return ret;
+}
+static ssize_t cache_slow_downcall(const char __user *buf,
+ size_t count, struct cache_detail *cd)
+{
+ static char write_buf[8192]; /* protected by queue_io_mutex */
+ ssize_t ret = -EINVAL;
+
+ if (count >= sizeof(write_buf))
+ goto out;
+ mutex_lock(&queue_io_mutex);
+ ret = cache_do_downcall(write_buf, buf, count, cd);
mutex_unlock(&queue_io_mutex);
- return err ? err : count;
+out:
+ return ret;
+}
+
+static ssize_t cache_downcall(struct address_space *mapping,
+ const char __user *buf,
+ size_t count, struct cache_detail *cd)
+{
+ struct page *page;
+ char *kaddr;
+ ssize_t ret = -ENOMEM;
+
+ if (count >= PAGE_CACHE_SIZE)
+ goto out_slow;
+
+ page = find_or_create_page(mapping, 0, GFP_KERNEL);
+ if (!page)
+ goto out_slow;
+
+ kaddr = kmap(page);
+ ret = cache_do_downcall(kaddr, buf, count, cd);
+ kunmap(page);
+ unlock_page(page);
+ page_cache_release(page);
+ return ret;
+out_slow:
+ return cache_slow_downcall(buf, count, cd);
+}
+
+static ssize_t cache_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos,
+ struct cache_detail *cd)
+{
+ struct address_space *mapping = filp->f_mapping;
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ ssize_t ret = -EINVAL;
+
+ if (!cd->cache_parse)
+ goto out;
+
+ mutex_lock(&inode->i_mutex);
+ ret = cache_downcall(mapping, buf, count, cd);
+ mutex_unlock(&inode->i_mutex);
+out:
+ return ret;
}
static DECLARE_WAIT_QUEUE_HEAD(queue_wait);
-static unsigned int
-cache_poll(struct file *filp, poll_table *wait)
+static unsigned int cache_poll(struct file *filp, poll_table *wait,
+ struct cache_detail *cd)
{
unsigned int mask;
struct cache_reader *rp = filp->private_data;
struct cache_queue *cq;
- struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
poll_wait(filp, &queue_wait, wait);
@@ -838,14 +818,13 @@
return mask;
}
-static int
-cache_ioctl(struct inode *ino, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static int cache_ioctl(struct inode *ino, struct file *filp,
+ unsigned int cmd, unsigned long arg,
+ struct cache_detail *cd)
{
int len = 0;
struct cache_reader *rp = filp->private_data;
struct cache_queue *cq;
- struct cache_detail *cd = PDE(ino)->data;
if (cmd != FIONREAD || !rp)
return -EINVAL;
@@ -868,15 +847,15 @@
return put_user(len, (int __user *)arg);
}
-static int
-cache_open(struct inode *inode, struct file *filp)
+static int cache_open(struct inode *inode, struct file *filp,
+ struct cache_detail *cd)
{
struct cache_reader *rp = NULL;
+ if (!cd || !try_module_get(cd->owner))
+ return -EACCES;
nonseekable_open(inode, filp);
if (filp->f_mode & FMODE_READ) {
- struct cache_detail *cd = PDE(inode)->data;
-
rp = kmalloc(sizeof(*rp), GFP_KERNEL);
if (!rp)
return -ENOMEM;
@@ -891,11 +870,10 @@
return 0;
}
-static int
-cache_release(struct inode *inode, struct file *filp)
+static int cache_release(struct inode *inode, struct file *filp,
+ struct cache_detail *cd)
{
struct cache_reader *rp = filp->private_data;
- struct cache_detail *cd = PDE(inode)->data;
if (rp) {
spin_lock(&queue_lock);
@@ -919,23 +897,12 @@
cd->last_close = get_seconds();
atomic_dec(&cd->readers);
}
+ module_put(cd->owner);
return 0;
}
-static const struct file_operations cache_file_operations = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = cache_read,
- .write = cache_write,
- .poll = cache_poll,
- .ioctl = cache_ioctl, /* for FIONREAD */
- .open = cache_open,
- .release = cache_release,
-};
-
-
static void cache_dequeue(struct cache_detail *detail, struct cache_head *ch)
{
struct cache_queue *cq;
@@ -1036,15 +1003,21 @@
if (detail->last_warn != detail->last_close) {
detail->last_warn = detail->last_close;
if (detail->warn_no_listener)
- detail->warn_no_listener(detail);
+ detail->warn_no_listener(detail, detail->last_close != 0);
}
}
/*
- * register an upcall request to user-space.
+ * register an upcall request to user-space and queue it up for read() by the
+ * upcall daemon.
+ *
* Each request is at most one page long.
*/
-static int cache_make_upcall(struct cache_detail *detail, struct cache_head *h)
+int sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h,
+ void (*cache_request)(struct cache_detail *,
+ struct cache_head *,
+ char **,
+ int *))
{
char *buf;
@@ -1052,9 +1025,6 @@
char *bp;
int len;
- if (detail->cache_request == NULL)
- return -EINVAL;
-
if (atomic_read(&detail->readers) == 0 &&
detail->last_close < get_seconds() - 30) {
warn_no_listener(detail);
@@ -1073,7 +1043,7 @@
bp = buf; len = PAGE_SIZE;
- detail->cache_request(detail, h, &bp, &len);
+ cache_request(detail, h, &bp, &len);
if (len < 0) {
kfree(buf);
@@ -1091,6 +1061,7 @@
wake_up(&queue_wait);
return 0;
}
+EXPORT_SYMBOL_GPL(sunrpc_cache_pipe_upcall);
/*
* parse a message from user-space and pass it
@@ -1258,11 +1229,13 @@
.show = c_show,
};
-static int content_open(struct inode *inode, struct file *file)
+static int content_open(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
{
struct handle *han;
- struct cache_detail *cd = PDE(inode)->data;
+ if (!cd || !try_module_get(cd->owner))
+ return -EACCES;
han = __seq_open_private(file, &cache_content_op, sizeof(*han));
if (han == NULL)
return -ENOMEM;
@@ -1271,17 +1244,33 @@
return 0;
}
-static const struct file_operations content_file_operations = {
- .open = content_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release_private,
-};
+static int content_release(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
+{
+ int ret = seq_release_private(inode, file);
+ module_put(cd->owner);
+ return ret;
+}
+
+static int open_flush(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
+{
+ if (!cd || !try_module_get(cd->owner))
+ return -EACCES;
+ return nonseekable_open(inode, file);
+}
+
+static int release_flush(struct inode *inode, struct file *file,
+ struct cache_detail *cd)
+{
+ module_put(cd->owner);
+ return 0;
+}
static ssize_t read_flush(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos,
+ struct cache_detail *cd)
{
- struct cache_detail *cd = PDE(file->f_path.dentry->d_inode)->data;
char tbuf[20];
unsigned long p = *ppos;
size_t len;
@@ -1299,10 +1288,10 @@
return len;
}
-static ssize_t write_flush(struct file * file, const char __user * buf,
- size_t count, loff_t *ppos)
+static ssize_t write_flush(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos,
+ struct cache_detail *cd)
{
- struct cache_detail *cd = PDE(file->f_path.dentry->d_inode)->data;
char tbuf[20];
char *ep;
long flushtime;
@@ -1323,8 +1312,343 @@
return count;
}
-static const struct file_operations cache_flush_operations = {
- .open = nonseekable_open,
- .read = read_flush,
- .write = write_flush,
+static ssize_t cache_read_procfs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return cache_read(filp, buf, count, ppos, cd);
+}
+
+static ssize_t cache_write_procfs(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return cache_write(filp, buf, count, ppos, cd);
+}
+
+static unsigned int cache_poll_procfs(struct file *filp, poll_table *wait)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return cache_poll(filp, wait, cd);
+}
+
+static int cache_ioctl_procfs(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return cache_ioctl(inode, filp, cmd, arg, cd);
+}
+
+static int cache_open_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return cache_open(inode, filp, cd);
+}
+
+static int cache_release_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return cache_release(inode, filp, cd);
+}
+
+static const struct file_operations cache_file_operations_procfs = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = cache_read_procfs,
+ .write = cache_write_procfs,
+ .poll = cache_poll_procfs,
+ .ioctl = cache_ioctl_procfs, /* for FIONREAD */
+ .open = cache_open_procfs,
+ .release = cache_release_procfs,
};
+
+static int content_open_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return content_open(inode, filp, cd);
+}
+
+static int content_release_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return content_release(inode, filp, cd);
+}
+
+static const struct file_operations content_file_operations_procfs = {
+ .open = content_open_procfs,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = content_release_procfs,
+};
+
+static int open_flush_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return open_flush(inode, filp, cd);
+}
+
+static int release_flush_procfs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = PDE(inode)->data;
+
+ return release_flush(inode, filp, cd);
+}
+
+static ssize_t read_flush_procfs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return read_flush(filp, buf, count, ppos, cd);
+}
+
+static ssize_t write_flush_procfs(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
+
+ return write_flush(filp, buf, count, ppos, cd);
+}
+
+static const struct file_operations cache_flush_operations_procfs = {
+ .open = open_flush_procfs,
+ .read = read_flush_procfs,
+ .write = write_flush_procfs,
+ .release = release_flush_procfs,
+};
+
+static void remove_cache_proc_entries(struct cache_detail *cd)
+{
+ if (cd->u.procfs.proc_ent == NULL)
+ return;
+ if (cd->u.procfs.flush_ent)
+ remove_proc_entry("flush", cd->u.procfs.proc_ent);
+ if (cd->u.procfs.channel_ent)
+ remove_proc_entry("channel", cd->u.procfs.proc_ent);
+ if (cd->u.procfs.content_ent)
+ remove_proc_entry("content", cd->u.procfs.proc_ent);
+ cd->u.procfs.proc_ent = NULL;
+ remove_proc_entry(cd->name, proc_net_rpc);
+}
+
+#ifdef CONFIG_PROC_FS
+static int create_cache_proc_entries(struct cache_detail *cd)
+{
+ struct proc_dir_entry *p;
+
+ cd->u.procfs.proc_ent = proc_mkdir(cd->name, proc_net_rpc);
+ if (cd->u.procfs.proc_ent == NULL)
+ goto out_nomem;
+ cd->u.procfs.channel_ent = NULL;
+ cd->u.procfs.content_ent = NULL;
+
+ p = proc_create_data("flush", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->u.procfs.proc_ent,
+ &cache_flush_operations_procfs, cd);
+ cd->u.procfs.flush_ent = p;
+ if (p == NULL)
+ goto out_nomem;
+
+ if (cd->cache_upcall || cd->cache_parse) {
+ p = proc_create_data("channel", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->u.procfs.proc_ent,
+ &cache_file_operations_procfs, cd);
+ cd->u.procfs.channel_ent = p;
+ if (p == NULL)
+ goto out_nomem;
+ }
+ if (cd->cache_show) {
+ p = proc_create_data("content", S_IFREG|S_IRUSR|S_IWUSR,
+ cd->u.procfs.proc_ent,
+ &content_file_operations_procfs, cd);
+ cd->u.procfs.content_ent = p;
+ if (p == NULL)
+ goto out_nomem;
+ }
+ return 0;
+out_nomem:
+ remove_cache_proc_entries(cd);
+ return -ENOMEM;
+}
+#else /* CONFIG_PROC_FS */
+static int create_cache_proc_entries(struct cache_detail *cd)
+{
+ return 0;
+}
+#endif
+
+int cache_register(struct cache_detail *cd)
+{
+ int ret;
+
+ sunrpc_init_cache_detail(cd);
+ ret = create_cache_proc_entries(cd);
+ if (ret)
+ sunrpc_destroy_cache_detail(cd);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cache_register);
+
+void cache_unregister(struct cache_detail *cd)
+{
+ remove_cache_proc_entries(cd);
+ sunrpc_destroy_cache_detail(cd);
+}
+EXPORT_SYMBOL_GPL(cache_unregister);
+
+static ssize_t cache_read_pipefs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return cache_read(filp, buf, count, ppos, cd);
+}
+
+static ssize_t cache_write_pipefs(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return cache_write(filp, buf, count, ppos, cd);
+}
+
+static unsigned int cache_poll_pipefs(struct file *filp, poll_table *wait)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return cache_poll(filp, wait, cd);
+}
+
+static int cache_ioctl_pipefs(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return cache_ioctl(inode, filp, cmd, arg, cd);
+}
+
+static int cache_open_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return cache_open(inode, filp, cd);
+}
+
+static int cache_release_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return cache_release(inode, filp, cd);
+}
+
+const struct file_operations cache_file_operations_pipefs = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = cache_read_pipefs,
+ .write = cache_write_pipefs,
+ .poll = cache_poll_pipefs,
+ .ioctl = cache_ioctl_pipefs, /* for FIONREAD */
+ .open = cache_open_pipefs,
+ .release = cache_release_pipefs,
+};
+
+static int content_open_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return content_open(inode, filp, cd);
+}
+
+static int content_release_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return content_release(inode, filp, cd);
+}
+
+const struct file_operations content_file_operations_pipefs = {
+ .open = content_open_pipefs,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = content_release_pipefs,
+};
+
+static int open_flush_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return open_flush(inode, filp, cd);
+}
+
+static int release_flush_pipefs(struct inode *inode, struct file *filp)
+{
+ struct cache_detail *cd = RPC_I(inode)->private;
+
+ return release_flush(inode, filp, cd);
+}
+
+static ssize_t read_flush_pipefs(struct file *filp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return read_flush(filp, buf, count, ppos, cd);
+}
+
+static ssize_t write_flush_pipefs(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct cache_detail *cd = RPC_I(filp->f_path.dentry->d_inode)->private;
+
+ return write_flush(filp, buf, count, ppos, cd);
+}
+
+const struct file_operations cache_flush_operations_pipefs = {
+ .open = open_flush_pipefs,
+ .read = read_flush_pipefs,
+ .write = write_flush_pipefs,
+ .release = release_flush_pipefs,
+};
+
+int sunrpc_cache_register_pipefs(struct dentry *parent,
+ const char *name, mode_t umode,
+ struct cache_detail *cd)
+{
+ struct qstr q;
+ struct dentry *dir;
+ int ret = 0;
+
+ sunrpc_init_cache_detail(cd);
+ q.name = name;
+ q.len = strlen(name);
+ q.hash = full_name_hash(q.name, q.len);
+ dir = rpc_create_cache_dir(parent, &q, umode, cd);
+ if (!IS_ERR(dir))
+ cd->u.pipefs.dir = dir;
+ else {
+ sunrpc_destroy_cache_detail(cd);
+ ret = PTR_ERR(dir);
+ }
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sunrpc_cache_register_pipefs);
+
+void sunrpc_cache_unregister_pipefs(struct cache_detail *cd)
+{
+ rpc_remove_cache_dir(cd->u.pipefs.dir);
+ cd->u.pipefs.dir = NULL;
+ sunrpc_destroy_cache_detail(cd);
+}
+EXPORT_SYMBOL_GPL(sunrpc_cache_unregister_pipefs);
+
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 5bc2f45..c1e467e 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -27,8 +27,9 @@
#include <linux/types.h>
#include <linux/kallsyms.h>
#include <linux/mm.h>
+#include <linux/namei.h>
+#include <linux/mount.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/utsname.h>
#include <linux/workqueue.h>
#include <linux/in6.h>
@@ -98,33 +99,49 @@
rpc_setup_pipedir(struct rpc_clnt *clnt, char *dir_name)
{
static uint32_t clntid;
+ struct nameidata nd;
+ struct path path;
+ char name[15];
+ struct qstr q = {
+ .name = name,
+ };
int error;
- clnt->cl_vfsmnt = ERR_PTR(-ENOENT);
- clnt->cl_dentry = ERR_PTR(-ENOENT);
+ clnt->cl_path.mnt = ERR_PTR(-ENOENT);
+ clnt->cl_path.dentry = ERR_PTR(-ENOENT);
if (dir_name == NULL)
return 0;
- clnt->cl_vfsmnt = rpc_get_mount();
- if (IS_ERR(clnt->cl_vfsmnt))
- return PTR_ERR(clnt->cl_vfsmnt);
+ path.mnt = rpc_get_mount();
+ if (IS_ERR(path.mnt))
+ return PTR_ERR(path.mnt);
+ error = vfs_path_lookup(path.mnt->mnt_root, path.mnt, dir_name, 0, &nd);
+ if (error)
+ goto err;
for (;;) {
- snprintf(clnt->cl_pathname, sizeof(clnt->cl_pathname),
- "%s/clnt%x", dir_name,
- (unsigned int)clntid++);
- clnt->cl_pathname[sizeof(clnt->cl_pathname) - 1] = '\0';
- clnt->cl_dentry = rpc_mkdir(clnt->cl_pathname, clnt);
- if (!IS_ERR(clnt->cl_dentry))
- return 0;
- error = PTR_ERR(clnt->cl_dentry);
+ q.len = snprintf(name, sizeof(name), "clnt%x", (unsigned int)clntid++);
+ name[sizeof(name) - 1] = '\0';
+ q.hash = full_name_hash(q.name, q.len);
+ path.dentry = rpc_create_client_dir(nd.path.dentry, &q, clnt);
+ if (!IS_ERR(path.dentry))
+ break;
+ error = PTR_ERR(path.dentry);
if (error != -EEXIST) {
- printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n",
- clnt->cl_pathname, error);
- rpc_put_mount();
- return error;
+ printk(KERN_INFO "RPC: Couldn't create pipefs entry"
+ " %s/%s, error %d\n",
+ dir_name, name, error);
+ goto err_path_put;
}
}
+ path_put(&nd.path);
+ clnt->cl_path = path;
+ return 0;
+err_path_put:
+ path_put(&nd.path);
+err:
+ rpc_put_mount();
+ return error;
}
static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, struct rpc_xprt *xprt)
@@ -232,8 +249,8 @@
return clnt;
out_no_auth:
- if (!IS_ERR(clnt->cl_dentry)) {
- rpc_rmdir(clnt->cl_dentry);
+ if (!IS_ERR(clnt->cl_path.dentry)) {
+ rpc_remove_client_dir(clnt->cl_path.dentry);
rpc_put_mount();
}
out_no_path:
@@ -424,8 +441,8 @@
dprintk("RPC: destroying %s client for %s\n",
clnt->cl_protname, clnt->cl_server);
- if (!IS_ERR(clnt->cl_dentry)) {
- rpc_rmdir(clnt->cl_dentry);
+ if (!IS_ERR(clnt->cl_path.dentry)) {
+ rpc_remove_client_dir(clnt->cl_path.dentry);
rpc_put_mount();
}
if (clnt->cl_parent != clnt) {
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 9ced062..7f676bd 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -26,6 +26,7 @@
#include <linux/sunrpc/clnt.h>
#include <linux/workqueue.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
+#include <linux/sunrpc/cache.h>
static struct vfsmount *rpc_mount __read_mostly;
static int rpc_mount_count;
@@ -125,7 +126,7 @@
rpc_close_pipes(struct inode *inode)
{
struct rpc_inode *rpci = RPC_I(inode);
- struct rpc_pipe_ops *ops;
+ const struct rpc_pipe_ops *ops;
int need_release;
mutex_lock(&inode->i_mutex);
@@ -398,66 +399,12 @@
/*
- * We have a single directory with 1 node in it.
- */
-enum {
- RPCAUTH_Root = 1,
- RPCAUTH_lockd,
- RPCAUTH_mount,
- RPCAUTH_nfs,
- RPCAUTH_portmap,
- RPCAUTH_statd,
- RPCAUTH_nfsd4_cb,
- RPCAUTH_RootEOF
-};
-
-/*
* Description of fs contents.
*/
struct rpc_filelist {
- char *name;
+ const char *name;
const struct file_operations *i_fop;
- int mode;
-};
-
-static struct rpc_filelist files[] = {
- [RPCAUTH_lockd] = {
- .name = "lockd",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_mount] = {
- .name = "mount",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_nfs] = {
- .name = "nfs",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_portmap] = {
- .name = "portmap",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_statd] = {
- .name = "statd",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
- [RPCAUTH_nfsd4_cb] = {
- .name = "nfsd4_cb",
- .mode = S_IFDIR | S_IRUGO | S_IXUGO,
- },
-};
-
-enum {
- RPCAUTH_info = 2,
- RPCAUTH_EOF
-};
-
-static struct rpc_filelist authfiles[] = {
- [RPCAUTH_info] = {
- .name = "info",
- .i_fop = &rpc_info_operations,
- .mode = S_IFREG | S_IRUSR,
- },
+ umode_t mode;
};
struct vfsmount *rpc_get_mount(void)
@@ -469,11 +416,13 @@
return ERR_PTR(err);
return rpc_mount;
}
+EXPORT_SYMBOL_GPL(rpc_get_mount);
void rpc_put_mount(void)
{
simple_release_fs(&rpc_mount, &rpc_mount_count);
}
+EXPORT_SYMBOL_GPL(rpc_put_mount);
static int rpc_delete_dentry(struct dentry *dentry)
{
@@ -484,39 +433,8 @@
.d_delete = rpc_delete_dentry,
};
-static int
-rpc_lookup_parent(char *path, struct nameidata *nd)
-{
- struct vfsmount *mnt;
-
- if (path[0] == '\0')
- return -ENOENT;
-
- mnt = rpc_get_mount();
- if (IS_ERR(mnt)) {
- printk(KERN_WARNING "%s: %s failed to mount "
- "pseudofilesystem \n", __FILE__, __func__);
- return PTR_ERR(mnt);
- }
-
- if (vfs_path_lookup(mnt->mnt_root, mnt, path, LOOKUP_PARENT, nd)) {
- printk(KERN_WARNING "%s: %s failed to find path %s\n",
- __FILE__, __func__, path);
- rpc_put_mount();
- return -ENOENT;
- }
- return 0;
-}
-
-static void
-rpc_release_path(struct nameidata *nd)
-{
- path_put(&nd->path);
- rpc_put_mount();
-}
-
static struct inode *
-rpc_get_inode(struct super_block *sb, int mode)
+rpc_get_inode(struct super_block *sb, umode_t mode)
{
struct inode *inode = new_inode(sb);
if (!inode)
@@ -534,212 +452,274 @@
return inode;
}
-/*
- * FIXME: This probably has races.
- */
-static void rpc_depopulate(struct dentry *parent,
- unsigned long start, unsigned long eof)
-{
- struct inode *dir = parent->d_inode;
- struct list_head *pos, *next;
- struct dentry *dentry, *dvec[10];
- int n = 0;
-
- mutex_lock_nested(&dir->i_mutex, I_MUTEX_CHILD);
-repeat:
- spin_lock(&dcache_lock);
- list_for_each_safe(pos, next, &parent->d_subdirs) {
- dentry = list_entry(pos, struct dentry, d_u.d_child);
- if (!dentry->d_inode ||
- dentry->d_inode->i_ino < start ||
- dentry->d_inode->i_ino >= eof)
- continue;
- spin_lock(&dentry->d_lock);
- if (!d_unhashed(dentry)) {
- dget_locked(dentry);
- __d_drop(dentry);
- spin_unlock(&dentry->d_lock);
- dvec[n++] = dentry;
- if (n == ARRAY_SIZE(dvec))
- break;
- } else
- spin_unlock(&dentry->d_lock);
- }
- spin_unlock(&dcache_lock);
- if (n) {
- do {
- dentry = dvec[--n];
- if (S_ISREG(dentry->d_inode->i_mode))
- simple_unlink(dir, dentry);
- else if (S_ISDIR(dentry->d_inode->i_mode))
- simple_rmdir(dir, dentry);
- d_delete(dentry);
- dput(dentry);
- } while (n);
- goto repeat;
- }
- mutex_unlock(&dir->i_mutex);
-}
-
-static int
-rpc_populate(struct dentry *parent,
- struct rpc_filelist *files,
- int start, int eof)
-{
- struct inode *inode, *dir = parent->d_inode;
- void *private = RPC_I(dir)->private;
- struct dentry *dentry;
- int mode, i;
-
- mutex_lock(&dir->i_mutex);
- for (i = start; i < eof; i++) {
- dentry = d_alloc_name(parent, files[i].name);
- if (!dentry)
- goto out_bad;
- dentry->d_op = &rpc_dentry_operations;
- mode = files[i].mode;
- inode = rpc_get_inode(dir->i_sb, mode);
- if (!inode) {
- dput(dentry);
- goto out_bad;
- }
- inode->i_ino = i;
- if (files[i].i_fop)
- inode->i_fop = files[i].i_fop;
- if (private)
- rpc_inode_setowner(inode, private);
- if (S_ISDIR(mode))
- inc_nlink(dir);
- d_add(dentry, inode);
- fsnotify_create(dir, dentry);
- }
- mutex_unlock(&dir->i_mutex);
- return 0;
-out_bad:
- mutex_unlock(&dir->i_mutex);
- printk(KERN_WARNING "%s: %s failed to populate directory %s\n",
- __FILE__, __func__, parent->d_name.name);
- return -ENOMEM;
-}
-
-static int
-__rpc_mkdir(struct inode *dir, struct dentry *dentry)
+static int __rpc_create_common(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private)
{
struct inode *inode;
- inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUGO | S_IXUGO);
+ BUG_ON(!d_unhashed(dentry));
+ inode = rpc_get_inode(dir->i_sb, mode);
if (!inode)
goto out_err;
inode->i_ino = iunique(dir->i_sb, 100);
- d_instantiate(dentry, inode);
- inc_nlink(dir);
- fsnotify_mkdir(dir, dentry);
+ if (i_fop)
+ inode->i_fop = i_fop;
+ if (private)
+ rpc_inode_setowner(inode, private);
+ d_add(dentry, inode);
return 0;
out_err:
printk(KERN_WARNING "%s: %s failed to allocate inode for dentry %s\n",
__FILE__, __func__, dentry->d_name.name);
+ dput(dentry);
return -ENOMEM;
}
-static int
-__rpc_rmdir(struct inode *dir, struct dentry *dentry)
+static int __rpc_create(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private)
{
- int error;
- error = simple_rmdir(dir, dentry);
- if (!error)
- d_delete(dentry);
- return error;
+ int err;
+
+ err = __rpc_create_common(dir, dentry, S_IFREG | mode, i_fop, private);
+ if (err)
+ return err;
+ fsnotify_create(dir, dentry);
+ return 0;
}
-static struct dentry *
-rpc_lookup_create(struct dentry *parent, const char *name, int len, int exclusive)
+static int __rpc_mkdir(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private)
+{
+ int err;
+
+ err = __rpc_create_common(dir, dentry, S_IFDIR | mode, i_fop, private);
+ if (err)
+ return err;
+ inc_nlink(dir);
+ fsnotify_mkdir(dir, dentry);
+ return 0;
+}
+
+static int __rpc_mkpipe(struct inode *dir, struct dentry *dentry,
+ umode_t mode,
+ const struct file_operations *i_fop,
+ void *private,
+ const struct rpc_pipe_ops *ops,
+ int flags)
+{
+ struct rpc_inode *rpci;
+ int err;
+
+ err = __rpc_create_common(dir, dentry, S_IFIFO | mode, i_fop, private);
+ if (err)
+ return err;
+ rpci = RPC_I(dentry->d_inode);
+ rpci->nkern_readwriters = 1;
+ rpci->private = private;
+ rpci->flags = flags;
+ rpci->ops = ops;
+ fsnotify_create(dir, dentry);
+ return 0;
+}
+
+static int __rpc_rmdir(struct inode *dir, struct dentry *dentry)
+{
+ int ret;
+
+ dget(dentry);
+ ret = simple_rmdir(dir, dentry);
+ d_delete(dentry);
+ dput(dentry);
+ return ret;
+}
+
+static int __rpc_unlink(struct inode *dir, struct dentry *dentry)
+{
+ int ret;
+
+ dget(dentry);
+ ret = simple_unlink(dir, dentry);
+ d_delete(dentry);
+ dput(dentry);
+ return ret;
+}
+
+static int __rpc_rmpipe(struct inode *dir, struct dentry *dentry)
+{
+ struct inode *inode = dentry->d_inode;
+ struct rpc_inode *rpci = RPC_I(inode);
+
+ rpci->nkern_readwriters--;
+ if (rpci->nkern_readwriters != 0)
+ return 0;
+ rpc_close_pipes(inode);
+ return __rpc_unlink(dir, dentry);
+}
+
+static struct dentry *__rpc_lookup_create(struct dentry *parent,
+ struct qstr *name)
+{
+ struct dentry *dentry;
+
+ dentry = d_lookup(parent, name);
+ if (!dentry) {
+ dentry = d_alloc(parent, name);
+ if (!dentry) {
+ dentry = ERR_PTR(-ENOMEM);
+ goto out_err;
+ }
+ }
+ if (!dentry->d_inode)
+ dentry->d_op = &rpc_dentry_operations;
+out_err:
+ return dentry;
+}
+
+static struct dentry *__rpc_lookup_create_exclusive(struct dentry *parent,
+ struct qstr *name)
+{
+ struct dentry *dentry;
+
+ dentry = __rpc_lookup_create(parent, name);
+ if (dentry->d_inode == NULL)
+ return dentry;
+ dput(dentry);
+ return ERR_PTR(-EEXIST);
+}
+
+/*
+ * FIXME: This probably has races.
+ */
+static void __rpc_depopulate(struct dentry *parent,
+ const struct rpc_filelist *files,
+ int start, int eof)
{
struct inode *dir = parent->d_inode;
struct dentry *dentry;
+ struct qstr name;
+ int i;
+
+ for (i = start; i < eof; i++) {
+ name.name = files[i].name;
+ name.len = strlen(files[i].name);
+ name.hash = full_name_hash(name.name, name.len);
+ dentry = d_lookup(parent, &name);
+
+ if (dentry == NULL)
+ continue;
+ if (dentry->d_inode == NULL)
+ goto next;
+ switch (dentry->d_inode->i_mode & S_IFMT) {
+ default:
+ BUG();
+ case S_IFREG:
+ __rpc_unlink(dir, dentry);
+ break;
+ case S_IFDIR:
+ __rpc_rmdir(dir, dentry);
+ }
+next:
+ dput(dentry);
+ }
+}
+
+static void rpc_depopulate(struct dentry *parent,
+ const struct rpc_filelist *files,
+ int start, int eof)
+{
+ struct inode *dir = parent->d_inode;
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_CHILD);
+ __rpc_depopulate(parent, files, start, eof);
+ mutex_unlock(&dir->i_mutex);
+}
+
+static int rpc_populate(struct dentry *parent,
+ const struct rpc_filelist *files,
+ int start, int eof,
+ void *private)
+{
+ struct inode *dir = parent->d_inode;
+ struct dentry *dentry;
+ int i, err;
+
+ mutex_lock(&dir->i_mutex);
+ for (i = start; i < eof; i++) {
+ struct qstr q;
+
+ q.name = files[i].name;
+ q.len = strlen(files[i].name);
+ q.hash = full_name_hash(q.name, q.len);
+ dentry = __rpc_lookup_create_exclusive(parent, &q);
+ err = PTR_ERR(dentry);
+ if (IS_ERR(dentry))
+ goto out_bad;
+ switch (files[i].mode & S_IFMT) {
+ default:
+ BUG();
+ case S_IFREG:
+ err = __rpc_create(dir, dentry,
+ files[i].mode,
+ files[i].i_fop,
+ private);
+ break;
+ case S_IFDIR:
+ err = __rpc_mkdir(dir, dentry,
+ files[i].mode,
+ NULL,
+ private);
+ }
+ if (err != 0)
+ goto out_bad;
+ }
+ mutex_unlock(&dir->i_mutex);
+ return 0;
+out_bad:
+ __rpc_depopulate(parent, files, start, eof);
+ mutex_unlock(&dir->i_mutex);
+ printk(KERN_WARNING "%s: %s failed to populate directory %s\n",
+ __FILE__, __func__, parent->d_name.name);
+ return err;
+}
+
+static struct dentry *rpc_mkdir_populate(struct dentry *parent,
+ struct qstr *name, umode_t mode, void *private,
+ int (*populate)(struct dentry *, void *), void *args_populate)
+{
+ struct dentry *dentry;
+ struct inode *dir = parent->d_inode;
+ int error;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- dentry = lookup_one_len(name, parent, len);
+ dentry = __rpc_lookup_create_exclusive(parent, name);
if (IS_ERR(dentry))
+ goto out;
+ error = __rpc_mkdir(dir, dentry, mode, NULL, private);
+ if (error != 0)
goto out_err;
- if (!dentry->d_inode)
- dentry->d_op = &rpc_dentry_operations;
- else if (exclusive) {
- dput(dentry);
- dentry = ERR_PTR(-EEXIST);
- goto out_err;
+ if (populate != NULL) {
+ error = populate(dentry, args_populate);
+ if (error)
+ goto err_rmdir;
}
- return dentry;
-out_err:
- mutex_unlock(&dir->i_mutex);
- return dentry;
-}
-
-static struct dentry *
-rpc_lookup_negative(char *path, struct nameidata *nd)
-{
- struct dentry *dentry;
- int error;
-
- if ((error = rpc_lookup_parent(path, nd)) != 0)
- return ERR_PTR(error);
- dentry = rpc_lookup_create(nd->path.dentry, nd->last.name, nd->last.len,
- 1);
- if (IS_ERR(dentry))
- rpc_release_path(nd);
- return dentry;
-}
-
-/**
- * rpc_mkdir - Create a new directory in rpc_pipefs
- * @path: path from the rpc_pipefs root to the new directory
- * @rpc_client: rpc client to associate with this directory
- *
- * This creates a directory at the given @path associated with
- * @rpc_clnt, which will contain a file named "info" with some basic
- * information about the client, together with any "pipes" that may
- * later be created using rpc_mkpipe().
- */
-struct dentry *
-rpc_mkdir(char *path, struct rpc_clnt *rpc_client)
-{
- struct nameidata nd;
- struct dentry *dentry;
- struct inode *dir;
- int error;
-
- dentry = rpc_lookup_negative(path, &nd);
- if (IS_ERR(dentry))
- return dentry;
- dir = nd.path.dentry->d_inode;
- if ((error = __rpc_mkdir(dir, dentry)) != 0)
- goto err_dput;
- RPC_I(dentry->d_inode)->private = rpc_client;
- error = rpc_populate(dentry, authfiles,
- RPCAUTH_info, RPCAUTH_EOF);
- if (error)
- goto err_depopulate;
- dget(dentry);
out:
mutex_unlock(&dir->i_mutex);
- rpc_release_path(&nd);
return dentry;
-err_depopulate:
- rpc_depopulate(dentry, RPCAUTH_info, RPCAUTH_EOF);
+err_rmdir:
__rpc_rmdir(dir, dentry);
-err_dput:
- dput(dentry);
- printk(KERN_WARNING "%s: %s() failed to create directory %s (errno = %d)\n",
- __FILE__, __func__, path, error);
+out_err:
dentry = ERR_PTR(error);
goto out;
}
-/**
- * rpc_rmdir - Remove a directory created with rpc_mkdir()
- * @dentry: directory to remove
- */
-int
-rpc_rmdir(struct dentry *dentry)
+static int rpc_rmdir_depopulate(struct dentry *dentry,
+ void (*depopulate)(struct dentry *))
{
struct dentry *parent;
struct inode *dir;
@@ -748,9 +728,9 @@
parent = dget_parent(dentry);
dir = parent->d_inode;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- rpc_depopulate(dentry, RPCAUTH_info, RPCAUTH_EOF);
+ if (depopulate != NULL)
+ depopulate(dentry);
error = __rpc_rmdir(dir, dentry);
- dput(dentry);
mutex_unlock(&dir->i_mutex);
dput(parent);
return error;
@@ -776,50 +756,54 @@
* The @private argument passed here will be available to all these methods
* from the file pointer, via RPC_I(file->f_dentry->d_inode)->private.
*/
-struct dentry *
-rpc_mkpipe(struct dentry *parent, const char *name, void *private, struct rpc_pipe_ops *ops, int flags)
+struct dentry *rpc_mkpipe(struct dentry *parent, const char *name,
+ void *private, const struct rpc_pipe_ops *ops,
+ int flags)
{
struct dentry *dentry;
- struct inode *dir, *inode;
- struct rpc_inode *rpci;
+ struct inode *dir = parent->d_inode;
+ umode_t umode = S_IFIFO | S_IRUSR | S_IWUSR;
+ struct qstr q;
+ int err;
- dentry = rpc_lookup_create(parent, name, strlen(name), 0);
+ if (ops->upcall == NULL)
+ umode &= ~S_IRUGO;
+ if (ops->downcall == NULL)
+ umode &= ~S_IWUGO;
+
+ q.name = name;
+ q.len = strlen(name);
+ q.hash = full_name_hash(q.name, q.len),
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
+ dentry = __rpc_lookup_create(parent, &q);
if (IS_ERR(dentry))
- return dentry;
- dir = parent->d_inode;
+ goto out;
if (dentry->d_inode) {
- rpci = RPC_I(dentry->d_inode);
+ struct rpc_inode *rpci = RPC_I(dentry->d_inode);
if (rpci->private != private ||
rpci->ops != ops ||
rpci->flags != flags) {
dput (dentry);
- dentry = ERR_PTR(-EBUSY);
+ err = -EBUSY;
+ goto out_err;
}
rpci->nkern_readwriters++;
goto out;
}
- inode = rpc_get_inode(dir->i_sb, S_IFIFO | S_IRUSR | S_IWUSR);
- if (!inode)
- goto err_dput;
- inode->i_ino = iunique(dir->i_sb, 100);
- inode->i_fop = &rpc_pipe_fops;
- d_instantiate(dentry, inode);
- rpci = RPC_I(inode);
- rpci->private = private;
- rpci->flags = flags;
- rpci->ops = ops;
- rpci->nkern_readwriters = 1;
- fsnotify_create(dir, dentry);
- dget(dentry);
+
+ err = __rpc_mkpipe(dir, dentry, umode, &rpc_pipe_fops,
+ private, ops, flags);
+ if (err)
+ goto out_err;
out:
mutex_unlock(&dir->i_mutex);
return dentry;
-err_dput:
- dput(dentry);
- dentry = ERR_PTR(-ENOMEM);
+out_err:
+ dentry = ERR_PTR(err);
printk(KERN_WARNING "%s: %s() failed to create pipe %s/%s (errno = %d)\n",
__FILE__, __func__, parent->d_name.name, name,
- -ENOMEM);
+ err);
goto out;
}
EXPORT_SYMBOL_GPL(rpc_mkpipe);
@@ -842,19 +826,107 @@
parent = dget_parent(dentry);
dir = parent->d_inode;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- if (--RPC_I(dentry->d_inode)->nkern_readwriters == 0) {
- rpc_close_pipes(dentry->d_inode);
- error = simple_unlink(dir, dentry);
- if (!error)
- d_delete(dentry);
- }
- dput(dentry);
+ error = __rpc_rmpipe(dir, dentry);
mutex_unlock(&dir->i_mutex);
dput(parent);
return error;
}
EXPORT_SYMBOL_GPL(rpc_unlink);
+enum {
+ RPCAUTH_info,
+ RPCAUTH_EOF
+};
+
+static const struct rpc_filelist authfiles[] = {
+ [RPCAUTH_info] = {
+ .name = "info",
+ .i_fop = &rpc_info_operations,
+ .mode = S_IFREG | S_IRUSR,
+ },
+};
+
+static int rpc_clntdir_populate(struct dentry *dentry, void *private)
+{
+ return rpc_populate(dentry,
+ authfiles, RPCAUTH_info, RPCAUTH_EOF,
+ private);
+}
+
+static void rpc_clntdir_depopulate(struct dentry *dentry)
+{
+ rpc_depopulate(dentry, authfiles, RPCAUTH_info, RPCAUTH_EOF);
+}
+
+/**
+ * rpc_create_client_dir - Create a new rpc_client directory in rpc_pipefs
+ * @path: path from the rpc_pipefs root to the new directory
+ * @rpc_client: rpc client to associate with this directory
+ *
+ * This creates a directory at the given @path associated with
+ * @rpc_clnt, which will contain a file named "info" with some basic
+ * information about the client, together with any "pipes" that may
+ * later be created using rpc_mkpipe().
+ */
+struct dentry *rpc_create_client_dir(struct dentry *dentry,
+ struct qstr *name,
+ struct rpc_clnt *rpc_client)
+{
+ return rpc_mkdir_populate(dentry, name, S_IRUGO | S_IXUGO, NULL,
+ rpc_clntdir_populate, rpc_client);
+}
+
+/**
+ * rpc_remove_client_dir - Remove a directory created with rpc_create_client_dir()
+ * @dentry: directory to remove
+ */
+int rpc_remove_client_dir(struct dentry *dentry)
+{
+ return rpc_rmdir_depopulate(dentry, rpc_clntdir_depopulate);
+}
+
+static const struct rpc_filelist cache_pipefs_files[3] = {
+ [0] = {
+ .name = "channel",
+ .i_fop = &cache_file_operations_pipefs,
+ .mode = S_IFREG|S_IRUSR|S_IWUSR,
+ },
+ [1] = {
+ .name = "content",
+ .i_fop = &content_file_operations_pipefs,
+ .mode = S_IFREG|S_IRUSR,
+ },
+ [2] = {
+ .name = "flush",
+ .i_fop = &cache_flush_operations_pipefs,
+ .mode = S_IFREG|S_IRUSR|S_IWUSR,
+ },
+};
+
+static int rpc_cachedir_populate(struct dentry *dentry, void *private)
+{
+ return rpc_populate(dentry,
+ cache_pipefs_files, 0, 3,
+ private);
+}
+
+static void rpc_cachedir_depopulate(struct dentry *dentry)
+{
+ rpc_depopulate(dentry, cache_pipefs_files, 0, 3);
+}
+
+struct dentry *rpc_create_cache_dir(struct dentry *parent, struct qstr *name,
+ mode_t umode, struct cache_detail *cd)
+{
+ return rpc_mkdir_populate(parent, name, umode, NULL,
+ rpc_cachedir_populate, cd);
+}
+
+void rpc_remove_cache_dir(struct dentry *dentry)
+{
+ rpc_rmdir_depopulate(dentry, rpc_cachedir_depopulate);
+}
+
/*
* populate the filesystem
*/
@@ -866,6 +938,51 @@
#define RPCAUTH_GSSMAGIC 0x67596969
+/*
+ * We have a single directory with 1 node in it.
+ */
+enum {
+ RPCAUTH_lockd,
+ RPCAUTH_mount,
+ RPCAUTH_nfs,
+ RPCAUTH_portmap,
+ RPCAUTH_statd,
+ RPCAUTH_nfsd4_cb,
+ RPCAUTH_cache,
+ RPCAUTH_RootEOF
+};
+
+static const struct rpc_filelist files[] = {
+ [RPCAUTH_lockd] = {
+ .name = "lockd",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_mount] = {
+ .name = "mount",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_nfs] = {
+ .name = "nfs",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_portmap] = {
+ .name = "portmap",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_statd] = {
+ .name = "statd",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_nfsd4_cb] = {
+ .name = "nfsd4_cb",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+ [RPCAUTH_cache] = {
+ .name = "cache",
+ .mode = S_IFDIR | S_IRUGO | S_IXUGO,
+ },
+};
+
static int
rpc_fill_super(struct super_block *sb, void *data, int silent)
{
@@ -886,7 +1003,7 @@
iput(inode);
return -ENOMEM;
}
- if (rpc_populate(root, files, RPCAUTH_Root + 1, RPCAUTH_RootEOF))
+ if (rpc_populate(root, files, RPCAUTH_lockd, RPCAUTH_RootEOF, NULL))
goto out;
sb->s_root = root;
return 0;
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index beee6da..830faf4 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -75,6 +75,37 @@
#define RPCB_OWNER_STRING "0"
#define RPCB_MAXOWNERLEN sizeof(RPCB_OWNER_STRING)
+/*
+ * XDR data type sizes
+ */
+#define RPCB_program_sz (1)
+#define RPCB_version_sz (1)
+#define RPCB_protocol_sz (1)
+#define RPCB_port_sz (1)
+#define RPCB_boolean_sz (1)
+
+#define RPCB_netid_sz (1 + XDR_QUADLEN(RPCBIND_MAXNETIDLEN))
+#define RPCB_addr_sz (1 + XDR_QUADLEN(RPCBIND_MAXUADDRLEN))
+#define RPCB_ownerstring_sz (1 + XDR_QUADLEN(RPCB_MAXOWNERLEN))
+
+/*
+ * XDR argument and result sizes
+ */
+#define RPCB_mappingargs_sz (RPCB_program_sz + RPCB_version_sz + \
+ RPCB_protocol_sz + RPCB_port_sz)
+#define RPCB_getaddrargs_sz (RPCB_program_sz + RPCB_version_sz + \
+ RPCB_netid_sz + RPCB_addr_sz + \
+ RPCB_ownerstring_sz)
+
+#define RPCB_getportres_sz RPCB_port_sz
+#define RPCB_setres_sz RPCB_boolean_sz
+
+/*
+ * Note that RFC 1833 does not put any size restrictions on the
+ * address string returned by the remote rpcbind database.
+ */
+#define RPCB_getaddrres_sz RPCB_addr_sz
+
static void rpcb_getport_done(struct rpc_task *, void *);
static void rpcb_map_release(void *data);
static struct rpc_program rpcb_program;
@@ -122,6 +153,7 @@
rpcb_wake_rpcbind_waiters(map->r_xprt, map->r_status);
xprt_put(map->r_xprt);
+ kfree(map->r_addr);
kfree(map);
}
@@ -268,12 +300,9 @@
const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
struct rpcbind_args *map = msg->rpc_argp;
unsigned short port = ntohs(sin->sin_port);
- char buf[32];
+ int result;
- /* Construct AF_INET universal address */
- snprintf(buf, sizeof(buf), "%pI4.%u.%u",
- &sin->sin_addr.s_addr, port >> 8, port & 0xff);
- map->r_addr = buf;
+ map->r_addr = rpc_sockaddr2uaddr(sap);
dprintk("RPC: %sregistering [%u, %u, %s, '%s'] with "
"local rpcbind\n", (port ? "" : "un"),
@@ -284,7 +313,9 @@
if (port)
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
- return rpcb_register_call(RPCBVERS_4, msg);
+ result = rpcb_register_call(RPCBVERS_4, msg);
+ kfree(map->r_addr);
+ return result;
}
/*
@@ -296,16 +327,9 @@
const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)sap;
struct rpcbind_args *map = msg->rpc_argp;
unsigned short port = ntohs(sin6->sin6_port);
- char buf[64];
+ int result;
- /* Construct AF_INET6 universal address */
- if (ipv6_addr_any(&sin6->sin6_addr))
- snprintf(buf, sizeof(buf), "::.%u.%u",
- port >> 8, port & 0xff);
- else
- snprintf(buf, sizeof(buf), "%pI6.%u.%u",
- &sin6->sin6_addr, port >> 8, port & 0xff);
- map->r_addr = buf;
+ map->r_addr = rpc_sockaddr2uaddr(sap);
dprintk("RPC: %sregistering [%u, %u, %s, '%s'] with "
"local rpcbind\n", (port ? "" : "un"),
@@ -316,7 +340,9 @@
if (port)
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
- return rpcb_register_call(RPCBVERS_4, msg);
+ result = rpcb_register_call(RPCBVERS_4, msg);
+ kfree(map->r_addr);
+ return result;
}
static int rpcb_unregister_all_protofamilies(struct rpc_message *msg)
@@ -428,7 +454,7 @@
struct rpc_message msg = {
.rpc_proc = &rpcb_procedures2[RPCBPROC_GETPORT],
.rpc_argp = &map,
- .rpc_resp = &map.r_port,
+ .rpc_resp = &map,
};
struct rpc_clnt *rpcb_clnt;
int status;
@@ -458,7 +484,7 @@
struct rpc_message msg = {
.rpc_proc = proc,
.rpc_argp = map,
- .rpc_resp = &map->r_port,
+ .rpc_resp = map,
};
struct rpc_task_setup task_setup_data = {
.rpc_client = rpcb_clnt,
@@ -539,6 +565,7 @@
goto bailout_nofree;
}
+ /* Parent transport's destination address */
salen = rpc_peeraddr(clnt, sap, sizeof(addr));
/* Don't ever use rpcbind v2 for AF_INET6 requests */
@@ -589,11 +616,22 @@
map->r_prot = xprt->prot;
map->r_port = 0;
map->r_xprt = xprt_get(xprt);
- map->r_netid = rpc_peeraddr2str(clnt, RPC_DISPLAY_NETID);
- map->r_addr = rpc_peeraddr2str(rpcb_clnt, RPC_DISPLAY_UNIVERSAL_ADDR);
- map->r_owner = "";
map->r_status = -EIO;
+ switch (bind_version) {
+ case RPCBVERS_4:
+ case RPCBVERS_3:
+ map->r_netid = rpc_peeraddr2str(clnt, RPC_DISPLAY_NETID);
+ map->r_addr = rpc_sockaddr2uaddr(sap);
+ map->r_owner = "";
+ break;
+ case RPCBVERS_2:
+ map->r_addr = NULL;
+ break;
+ default:
+ BUG();
+ }
+
child = rpcb_call_async(rpcb_clnt, map, proc);
rpc_release_client(rpcb_clnt);
if (IS_ERR(child)) {
@@ -656,176 +694,278 @@
* XDR functions for rpcbind
*/
-static int rpcb_encode_mapping(struct rpc_rqst *req, __be32 *p,
- struct rpcbind_args *rpcb)
+static int rpcb_enc_mapping(struct rpc_rqst *req, __be32 *p,
+ const struct rpcbind_args *rpcb)
{
- dprintk("RPC: encoding rpcb request (%u, %u, %d, %u)\n",
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+
+ dprintk("RPC: %5u encoding PMAP_%s call (%u, %u, %d, %u)\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name,
rpcb->r_prog, rpcb->r_vers, rpcb->r_prot, rpcb->r_port);
+
+ xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+
+ p = xdr_reserve_space(&xdr, sizeof(__be32) * RPCB_mappingargs_sz);
+ if (unlikely(p == NULL))
+ return -EIO;
+
*p++ = htonl(rpcb->r_prog);
*p++ = htonl(rpcb->r_vers);
*p++ = htonl(rpcb->r_prot);
- *p++ = htonl(rpcb->r_port);
+ *p = htonl(rpcb->r_port);
- req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
return 0;
}
-static int rpcb_decode_getport(struct rpc_rqst *req, __be32 *p,
- unsigned short *portp)
+static int rpcb_dec_getport(struct rpc_rqst *req, __be32 *p,
+ struct rpcbind_args *rpcb)
{
- *portp = (unsigned short) ntohl(*p++);
- dprintk("RPC: rpcb getport result: %u\n",
- *portp);
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+ unsigned long port;
+
+ xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+ rpcb->r_port = 0;
+
+ p = xdr_inline_decode(&xdr, sizeof(__be32));
+ if (unlikely(p == NULL))
+ return -EIO;
+
+ port = ntohl(*p);
+ dprintk("RPC: %5u PMAP_%s result: %lu\n", task->tk_pid,
+ task->tk_msg.rpc_proc->p_name, port);
+ if (unlikely(port > USHORT_MAX))
+ return -EIO;
+
+ rpcb->r_port = port;
return 0;
}
-static int rpcb_decode_set(struct rpc_rqst *req, __be32 *p,
- unsigned int *boolp)
+static int rpcb_dec_set(struct rpc_rqst *req, __be32 *p,
+ unsigned int *boolp)
{
- *boolp = (unsigned int) ntohl(*p++);
- dprintk("RPC: rpcb set/unset call %s\n",
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+
+ xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+ p = xdr_inline_decode(&xdr, sizeof(__be32));
+ if (unlikely(p == NULL))
+ return -EIO;
+
+ *boolp = 0;
+ if (*p)
+ *boolp = 1;
+
+ dprintk("RPC: %5u RPCB_%s call %s\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name,
(*boolp ? "succeeded" : "failed"));
return 0;
}
-static int rpcb_encode_getaddr(struct rpc_rqst *req, __be32 *p,
- struct rpcbind_args *rpcb)
+static int encode_rpcb_string(struct xdr_stream *xdr, const char *string,
+ const u32 maxstrlen)
{
- dprintk("RPC: encoding rpcb request (%u, %u, %s)\n",
- rpcb->r_prog, rpcb->r_vers, rpcb->r_addr);
- *p++ = htonl(rpcb->r_prog);
- *p++ = htonl(rpcb->r_vers);
+ u32 len;
+ __be32 *p;
- p = xdr_encode_string(p, rpcb->r_netid);
- p = xdr_encode_string(p, rpcb->r_addr);
- p = xdr_encode_string(p, rpcb->r_owner);
+ if (unlikely(string == NULL))
+ return -EIO;
+ len = strlen(string);
+ if (unlikely(len > maxstrlen))
+ return -EIO;
- req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+ p = xdr_reserve_space(xdr, sizeof(__be32) + len);
+ if (unlikely(p == NULL))
+ return -EIO;
+ xdr_encode_opaque(p, string, len);
return 0;
}
-static int rpcb_decode_getaddr(struct rpc_rqst *req, __be32 *p,
- unsigned short *portp)
+static int rpcb_enc_getaddr(struct rpc_rqst *req, __be32 *p,
+ const struct rpcbind_args *rpcb)
{
- char *addr;
- u32 addr_len;
- int c, i, f, first, val;
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
- *portp = 0;
- addr_len = ntohl(*p++);
+ dprintk("RPC: %5u encoding RPCB_%s call (%u, %u, '%s', '%s')\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name,
+ rpcb->r_prog, rpcb->r_vers,
+ rpcb->r_netid, rpcb->r_addr);
- if (addr_len == 0) {
- dprintk("RPC: rpcb_decode_getaddr: "
- "service is not registered\n");
+ xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+
+ p = xdr_reserve_space(&xdr,
+ sizeof(__be32) * (RPCB_program_sz + RPCB_version_sz));
+ if (unlikely(p == NULL))
+ return -EIO;
+ *p++ = htonl(rpcb->r_prog);
+ *p = htonl(rpcb->r_vers);
+
+ if (encode_rpcb_string(&xdr, rpcb->r_netid, RPCBIND_MAXNETIDLEN))
+ return -EIO;
+ if (encode_rpcb_string(&xdr, rpcb->r_addr, RPCBIND_MAXUADDRLEN))
+ return -EIO;
+ if (encode_rpcb_string(&xdr, rpcb->r_owner, RPCB_MAXOWNERLEN))
+ return -EIO;
+
+ return 0;
+}
+
+static int rpcb_dec_getaddr(struct rpc_rqst *req, __be32 *p,
+ struct rpcbind_args *rpcb)
+{
+ struct sockaddr_storage address;
+ struct sockaddr *sap = (struct sockaddr *)&address;
+ struct rpc_task *task = req->rq_task;
+ struct xdr_stream xdr;
+ u32 len;
+
+ rpcb->r_port = 0;
+
+ xdr_init_decode(&xdr, &req->rq_rcv_buf, p);
+
+ p = xdr_inline_decode(&xdr, sizeof(__be32));
+ if (unlikely(p == NULL))
+ goto out_fail;
+ len = ntohl(*p);
+
+ /*
+ * If the returned universal address is a null string,
+ * the requested RPC service was not registered.
+ */
+ if (len == 0) {
+ dprintk("RPC: %5u RPCB reply: program not registered\n",
+ task->tk_pid);
return 0;
}
- /*
- * Simple sanity check.
- */
- if (addr_len > RPCBIND_MAXUADDRLEN)
- goto out_err;
+ if (unlikely(len > RPCBIND_MAXUADDRLEN))
+ goto out_fail;
- /*
- * Start at the end and walk backwards until the first dot
- * is encountered. When the second dot is found, we have
- * both parts of the port number.
- */
- addr = (char *)p;
- val = 0;
- first = 1;
- f = 1;
- for (i = addr_len - 1; i > 0; i--) {
- c = addr[i];
- if (c >= '0' && c <= '9') {
- val += (c - '0') * f;
- f *= 10;
- } else if (c == '.') {
- if (first) {
- *portp = val;
- val = first = 0;
- f = 1;
- } else {
- *portp |= (val << 8);
- break;
- }
- }
- }
+ p = xdr_inline_decode(&xdr, len);
+ if (unlikely(p == NULL))
+ goto out_fail;
+ dprintk("RPC: %5u RPCB_%s reply: %s\n", task->tk_pid,
+ task->tk_msg.rpc_proc->p_name, (char *)p);
- /*
- * Simple sanity check. If we never saw a dot in the reply,
- * then this was probably just garbage.
- */
- if (first)
- goto out_err;
+ if (rpc_uaddr2sockaddr((char *)p, len, sap, sizeof(address)) == 0)
+ goto out_fail;
+ rpcb->r_port = rpc_get_port(sap);
- dprintk("RPC: rpcb_decode_getaddr port=%u\n", *portp);
return 0;
-out_err:
- dprintk("RPC: rpcbind server returned malformed reply\n");
+out_fail:
+ dprintk("RPC: %5u malformed RPCB_%s reply\n",
+ task->tk_pid, task->tk_msg.rpc_proc->p_name);
return -EIO;
}
-#define RPCB_program_sz (1u)
-#define RPCB_version_sz (1u)
-#define RPCB_protocol_sz (1u)
-#define RPCB_port_sz (1u)
-#define RPCB_boolean_sz (1u)
-
-#define RPCB_netid_sz (1+XDR_QUADLEN(RPCBIND_MAXNETIDLEN))
-#define RPCB_addr_sz (1+XDR_QUADLEN(RPCBIND_MAXUADDRLEN))
-#define RPCB_ownerstring_sz (1+XDR_QUADLEN(RPCB_MAXOWNERLEN))
-
-#define RPCB_mappingargs_sz RPCB_program_sz+RPCB_version_sz+ \
- RPCB_protocol_sz+RPCB_port_sz
-#define RPCB_getaddrargs_sz RPCB_program_sz+RPCB_version_sz+ \
- RPCB_netid_sz+RPCB_addr_sz+ \
- RPCB_ownerstring_sz
-
-#define RPCB_setres_sz RPCB_boolean_sz
-#define RPCB_getportres_sz RPCB_port_sz
-
-/*
- * Note that RFC 1833 does not put any size restrictions on the
- * address string returned by the remote rpcbind database.
- */
-#define RPCB_getaddrres_sz RPCB_addr_sz
-
-#define PROC(proc, argtype, restype) \
- [RPCBPROC_##proc] = { \
- .p_proc = RPCBPROC_##proc, \
- .p_encode = (kxdrproc_t) rpcb_encode_##argtype, \
- .p_decode = (kxdrproc_t) rpcb_decode_##restype, \
- .p_arglen = RPCB_##argtype##args_sz, \
- .p_replen = RPCB_##restype##res_sz, \
- .p_statidx = RPCBPROC_##proc, \
- .p_timer = 0, \
- .p_name = #proc, \
- }
-
/*
* Not all rpcbind procedures described in RFC 1833 are implemented
* since the Linux kernel RPC code requires only these.
*/
+
static struct rpc_procinfo rpcb_procedures2[] = {
- PROC(SET, mapping, set),
- PROC(UNSET, mapping, set),
- PROC(GETPORT, mapping, getport),
+ [RPCBPROC_SET] = {
+ .p_proc = RPCBPROC_SET,
+ .p_encode = (kxdrproc_t)rpcb_enc_mapping,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_mappingargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_SET,
+ .p_timer = 0,
+ .p_name = "SET",
+ },
+ [RPCBPROC_UNSET] = {
+ .p_proc = RPCBPROC_UNSET,
+ .p_encode = (kxdrproc_t)rpcb_enc_mapping,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_mappingargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_UNSET,
+ .p_timer = 0,
+ .p_name = "UNSET",
+ },
+ [RPCBPROC_GETPORT] = {
+ .p_proc = RPCBPROC_GETPORT,
+ .p_encode = (kxdrproc_t)rpcb_enc_mapping,
+ .p_decode = (kxdrproc_t)rpcb_dec_getport,
+ .p_arglen = RPCB_mappingargs_sz,
+ .p_replen = RPCB_getportres_sz,
+ .p_statidx = RPCBPROC_GETPORT,
+ .p_timer = 0,
+ .p_name = "GETPORT",
+ },
};
static struct rpc_procinfo rpcb_procedures3[] = {
- PROC(SET, getaddr, set),
- PROC(UNSET, getaddr, set),
- PROC(GETADDR, getaddr, getaddr),
+ [RPCBPROC_SET] = {
+ .p_proc = RPCBPROC_SET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_SET,
+ .p_timer = 0,
+ .p_name = "SET",
+ },
+ [RPCBPROC_UNSET] = {
+ .p_proc = RPCBPROC_UNSET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_UNSET,
+ .p_timer = 0,
+ .p_name = "UNSET",
+ },
+ [RPCBPROC_GETADDR] = {
+ .p_proc = RPCBPROC_GETADDR,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_getaddr,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_getaddrres_sz,
+ .p_statidx = RPCBPROC_GETADDR,
+ .p_timer = 0,
+ .p_name = "GETADDR",
+ },
};
static struct rpc_procinfo rpcb_procedures4[] = {
- PROC(SET, getaddr, set),
- PROC(UNSET, getaddr, set),
- PROC(GETADDR, getaddr, getaddr),
- PROC(GETVERSADDR, getaddr, getaddr),
+ [RPCBPROC_SET] = {
+ .p_proc = RPCBPROC_SET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_SET,
+ .p_timer = 0,
+ .p_name = "SET",
+ },
+ [RPCBPROC_UNSET] = {
+ .p_proc = RPCBPROC_UNSET,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_set,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_setres_sz,
+ .p_statidx = RPCBPROC_UNSET,
+ .p_timer = 0,
+ .p_name = "UNSET",
+ },
+ [RPCBPROC_GETADDR] = {
+ .p_proc = RPCBPROC_GETADDR,
+ .p_encode = (kxdrproc_t)rpcb_enc_getaddr,
+ .p_decode = (kxdrproc_t)rpcb_dec_getaddr,
+ .p_arglen = RPCB_getaddrargs_sz,
+ .p_replen = RPCB_getaddrres_sz,
+ .p_statidx = RPCBPROC_GETADDR,
+ .p_timer = 0,
+ .p_name = "GETADDR",
+ },
};
static struct rpcb_info rpcb_next_version[] = {
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 1102ce1..8f459ab 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -16,7 +16,6 @@
#include <linux/slab.h>
#include <linux/mempool.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index 843629f..8cce921 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -66,7 +66,8 @@
#ifdef CONFIG_PROC_FS
rpc_proc_exit();
#endif
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
MODULE_LICENSE("GPL");
-module_init(init_sunrpc);
+fs_initcall(init_sunrpc); /* Ensure we're initialised before nfs */
module_exit(cleanup_sunrpc);
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 6f33d33..27d4433 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -5,6 +5,7 @@
*/
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 799ff6e..117f68a 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -171,6 +171,11 @@
(*bpp)[-1] = '\n';
}
+static int ip_map_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, ip_map_request);
+}
+
static struct ip_map *ip_map_lookup(char *class, struct in6_addr *addr);
static int ip_map_update(struct ip_map *ipm, struct unix_domain *udom, time_t expiry);
@@ -289,7 +294,7 @@
.hash_table = ip_table,
.name = "auth.unix.ip",
.cache_put = ip_map_put,
- .cache_request = ip_map_request,
+ .cache_upcall = ip_map_upcall,
.cache_parse = ip_map_parse,
.cache_show = ip_map_show,
.match = ip_map_match,
@@ -523,6 +528,11 @@
(*bpp)[-1] = '\n';
}
+static int unix_gid_upcall(struct cache_detail *cd, struct cache_head *h)
+{
+ return sunrpc_cache_pipe_upcall(cd, h, unix_gid_request);
+}
+
static struct unix_gid *unix_gid_lookup(uid_t uid);
extern struct cache_detail unix_gid_cache;
@@ -622,7 +632,7 @@
.hash_table = gid_table,
.name = "auth.unix.gid",
.cache_put = unix_gid_put,
- .cache_request = unix_gid_request,
+ .cache_upcall = unix_gid_upcall,
.cache_parse = unix_gid_parse,
.cache_show = unix_gid_show,
.match = unix_gid_match,
diff --git a/net/sunrpc/timer.c b/net/sunrpc/timer.c
index 31becbf..dd82434 100644
--- a/net/sunrpc/timer.c
+++ b/net/sunrpc/timer.c
@@ -25,8 +25,13 @@
#define RPC_RTO_INIT (HZ/5)
#define RPC_RTO_MIN (HZ/10)
-void
-rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
+/**
+ * rpc_init_rtt - Initialize an RPC RTT estimator context
+ * @rt: context to initialize
+ * @timeo: initial timeout value, in jiffies
+ *
+ */
+void rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo)
{
unsigned long init = 0;
unsigned i;
@@ -43,12 +48,16 @@
}
EXPORT_SYMBOL_GPL(rpc_init_rtt);
-/*
+/**
+ * rpc_update_rtt - Update an RPC RTT estimator context
+ * @rt: context to update
+ * @timer: timer array index (request type)
+ * @m: recent actual RTT, in jiffies
+ *
* NB: When computing the smoothed RTT and standard deviation,
* be careful not to produce negative intermediate results.
*/
-void
-rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m)
+void rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m)
{
long *srtt, *sdrtt;
@@ -79,21 +88,25 @@
}
EXPORT_SYMBOL_GPL(rpc_update_rtt);
-/*
- * Estimate rto for an nfs rpc sent via. an unreliable datagram.
- * Use the mean and mean deviation of rtt for the appropriate type of rpc
- * for the frequent rpcs and a default for the others.
- * The justification for doing "other" this way is that these rpcs
- * happen so infrequently that timer est. would probably be stale.
- * Also, since many of these rpcs are
- * non-idempotent, a conservative timeout is desired.
+/**
+ * rpc_calc_rto - Provide an estimated timeout value
+ * @rt: context to use for calculation
+ * @timer: timer array index (request type)
+ *
+ * Estimate RTO for an NFS RPC sent via an unreliable datagram. Use
+ * the mean and mean deviation of RTT for the appropriate type of RPC
+ * for frequently issued RPCs, and a fixed default for the others.
+ *
+ * The justification for doing "other" this way is that these RPCs
+ * happen so infrequently that timer estimation would probably be
+ * stale. Also, since many of these RPCs are non-idempotent, a
+ * conservative timeout is desired.
+ *
* getattr, lookup,
* read, write, commit - A+4D
* other - timeo
*/
-
-unsigned long
-rpc_calc_rto(struct rpc_rtt *rt, unsigned timer)
+unsigned long rpc_calc_rto(struct rpc_rtt *rt, unsigned timer)
{
unsigned long res;
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index 406e26d..8bd690c 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -24,7 +24,7 @@
unsigned int quadlen = XDR_QUADLEN(obj->len);
p[quadlen] = 0; /* zero trailing bytes */
- *p++ = htonl(obj->len);
+ *p++ = cpu_to_be32(obj->len);
memcpy(p, obj->data, obj->len);
return p + XDR_QUADLEN(obj->len);
}
@@ -35,7 +35,7 @@
{
unsigned int len;
- if ((len = ntohl(*p++)) > XDR_MAX_NETOBJ)
+ if ((len = be32_to_cpu(*p++)) > XDR_MAX_NETOBJ)
return NULL;
obj->len = len;
obj->data = (u8 *) p;
@@ -83,7 +83,7 @@
*/
__be32 *xdr_encode_opaque(__be32 *p, const void *ptr, unsigned int nbytes)
{
- *p++ = htonl(nbytes);
+ *p++ = cpu_to_be32(nbytes);
return xdr_encode_opaque_fixed(p, ptr, nbytes);
}
EXPORT_SYMBOL_GPL(xdr_encode_opaque);
@@ -101,7 +101,7 @@
{
u32 len;
- len = ntohl(*p++);
+ len = be32_to_cpu(*p++);
if (len > maxlen)
return NULL;
*lenp = len;
@@ -771,7 +771,7 @@
status = read_bytes_from_xdr_buf(buf, base, &raw, sizeof(*obj));
if (status)
return status;
- *obj = ntohl(raw);
+ *obj = be32_to_cpu(raw);
return 0;
}
EXPORT_SYMBOL_GPL(xdr_decode_word);
@@ -779,7 +779,7 @@
int
xdr_encode_word(struct xdr_buf *buf, unsigned int base, u32 obj)
{
- __be32 raw = htonl(obj);
+ __be32 raw = cpu_to_be32(obj);
return write_bytes_to_xdr_buf(buf, base, &raw, sizeof(obj));
}
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 1dd6123..9a63f66 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -168,47 +168,25 @@
static void
xprt_rdma_format_addresses(struct rpc_xprt *xprt)
{
- struct sockaddr_in *addr = (struct sockaddr_in *)
+ struct sockaddr *sap = (struct sockaddr *)
&rpcx_to_rdmad(xprt).addr;
- char *buf;
+ struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+ char buf[64];
- buf = kzalloc(20, GFP_KERNEL);
- if (buf)
- snprintf(buf, 20, "%pI4", &addr->sin_addr.s_addr);
- xprt->address_strings[RPC_DISPLAY_ADDR] = buf;
+ (void)rpc_ntop(sap, buf, sizeof(buf));
+ xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
- buf = kzalloc(8, GFP_KERNEL);
- if (buf)
- snprintf(buf, 8, "%u", ntohs(addr->sin_port));
- xprt->address_strings[RPC_DISPLAY_PORT] = buf;
+ (void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
xprt->address_strings[RPC_DISPLAY_PROTO] = "rdma";
- buf = kzalloc(48, GFP_KERNEL);
- if (buf)
- snprintf(buf, 48, "addr=%pI4 port=%u proto=%s",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port), "rdma");
- xprt->address_strings[RPC_DISPLAY_ALL] = buf;
+ (void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
+ NIPQUAD(sin->sin_addr.s_addr));
+ xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
- buf = kzalloc(10, GFP_KERNEL);
- if (buf)
- snprintf(buf, 10, "%02x%02x%02x%02x",
- NIPQUAD(addr->sin_addr.s_addr));
- xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf)
- snprintf(buf, 8, "%4hx", ntohs(addr->sin_port));
- xprt->address_strings[RPC_DISPLAY_HEX_PORT] = buf;
-
- buf = kzalloc(30, GFP_KERNEL);
- if (buf)
- snprintf(buf, 30, "%pI4.%u.%u",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port) >> 8,
- ntohs(addr->sin_port) & 0xff);
- xprt->address_strings[RPC_DISPLAY_UNIVERSAL_ADDR] = buf;
+ (void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
/* netid */
xprt->address_strings[RPC_DISPLAY_NETID] = "rdma";
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 83c73c4..62438f3 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -248,8 +248,8 @@
* Connection of transports
*/
struct delayed_work connect_worker;
- struct sockaddr_storage addr;
- unsigned short port;
+ struct sockaddr_storage srcaddr;
+ unsigned short srcport;
/*
* UDP socket buffer size parameters
@@ -296,117 +296,60 @@
return (struct sockaddr_in6 *) &xprt->addr;
}
-static void xs_format_ipv4_peer_addresses(struct rpc_xprt *xprt,
- const char *protocol,
- const char *netid)
+static void xs_format_common_peer_addresses(struct rpc_xprt *xprt)
{
- struct sockaddr_in *addr = xs_addr_in(xprt);
- char *buf;
+ struct sockaddr *sap = xs_addr(xprt);
+ struct sockaddr_in6 *sin6;
+ struct sockaddr_in *sin;
+ char buf[128];
- buf = kzalloc(20, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 20, "%pI4", &addr->sin_addr.s_addr);
+ (void)rpc_ntop(sap, buf, sizeof(buf));
+ xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
+
+ switch (sap->sa_family) {
+ case AF_INET:
+ sin = xs_addr_in(xprt);
+ (void)snprintf(buf, sizeof(buf), "%02x%02x%02x%02x",
+ NIPQUAD(sin->sin_addr.s_addr));
+ break;
+ case AF_INET6:
+ sin6 = xs_addr_in6(xprt);
+ (void)snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
+ break;
+ default:
+ BUG();
}
- xprt->address_strings[RPC_DISPLAY_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%u",
- ntohs(addr->sin_port));
- }
- xprt->address_strings[RPC_DISPLAY_PORT] = buf;
-
- xprt->address_strings[RPC_DISPLAY_PROTO] = protocol;
-
- buf = kzalloc(48, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 48, "addr=%pI4 port=%u proto=%s",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port),
- protocol);
- }
- xprt->address_strings[RPC_DISPLAY_ALL] = buf;
-
- buf = kzalloc(10, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 10, "%02x%02x%02x%02x",
- NIPQUAD(addr->sin_addr.s_addr));
- }
- xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%4hx",
- ntohs(addr->sin_port));
- }
- xprt->address_strings[RPC_DISPLAY_HEX_PORT] = buf;
-
- buf = kzalloc(30, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 30, "%pI4.%u.%u",
- &addr->sin_addr.s_addr,
- ntohs(addr->sin_port) >> 8,
- ntohs(addr->sin_port) & 0xff);
- }
- xprt->address_strings[RPC_DISPLAY_UNIVERSAL_ADDR] = buf;
-
- xprt->address_strings[RPC_DISPLAY_NETID] = netid;
+ xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
}
-static void xs_format_ipv6_peer_addresses(struct rpc_xprt *xprt,
- const char *protocol,
- const char *netid)
+static void xs_format_common_peer_ports(struct rpc_xprt *xprt)
{
- struct sockaddr_in6 *addr = xs_addr_in6(xprt);
- char *buf;
+ struct sockaddr *sap = xs_addr(xprt);
+ char buf[128];
- buf = kzalloc(40, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 40, "%pI6",&addr->sin6_addr);
- }
- xprt->address_strings[RPC_DISPLAY_ADDR] = buf;
+ (void)snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%u",
- ntohs(addr->sin6_port));
- }
- xprt->address_strings[RPC_DISPLAY_PORT] = buf;
+ (void)snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
+ xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
+}
+static void xs_format_peer_addresses(struct rpc_xprt *xprt,
+ const char *protocol,
+ const char *netid)
+{
xprt->address_strings[RPC_DISPLAY_PROTO] = protocol;
-
- buf = kzalloc(64, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 64, "addr=%pI6 port=%u proto=%s",
- &addr->sin6_addr,
- ntohs(addr->sin6_port),
- protocol);
- }
- xprt->address_strings[RPC_DISPLAY_ALL] = buf;
-
- buf = kzalloc(36, GFP_KERNEL);
- if (buf)
- snprintf(buf, 36, "%pi6", &addr->sin6_addr);
-
- xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = buf;
-
- buf = kzalloc(8, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 8, "%4hx",
- ntohs(addr->sin6_port));
- }
- xprt->address_strings[RPC_DISPLAY_HEX_PORT] = buf;
-
- buf = kzalloc(50, GFP_KERNEL);
- if (buf) {
- snprintf(buf, 50, "%pI6.%u.%u",
- &addr->sin6_addr,
- ntohs(addr->sin6_port) >> 8,
- ntohs(addr->sin6_port) & 0xff);
- }
- xprt->address_strings[RPC_DISPLAY_UNIVERSAL_ADDR] = buf;
-
xprt->address_strings[RPC_DISPLAY_NETID] = netid;
+ xs_format_common_peer_addresses(xprt);
+ xs_format_common_peer_ports(xprt);
+}
+
+static void xs_update_peer_port(struct rpc_xprt *xprt)
+{
+ kfree(xprt->address_strings[RPC_DISPLAY_HEX_PORT]);
+ kfree(xprt->address_strings[RPC_DISPLAY_PORT]);
+
+ xs_format_common_peer_ports(xprt);
}
static void xs_free_peer_addresses(struct rpc_xprt *xprt)
@@ -1587,25 +1530,15 @@
*/
static void xs_set_port(struct rpc_xprt *xprt, unsigned short port)
{
- struct sockaddr *addr = xs_addr(xprt);
-
dprintk("RPC: setting port for xprt %p to %u\n", xprt, port);
- switch (addr->sa_family) {
- case AF_INET:
- ((struct sockaddr_in *)addr)->sin_port = htons(port);
- break;
- case AF_INET6:
- ((struct sockaddr_in6 *)addr)->sin6_port = htons(port);
- break;
- default:
- BUG();
- }
+ rpc_set_port(xs_addr(xprt), port);
+ xs_update_peer_port(xprt);
}
static unsigned short xs_get_srcport(struct sock_xprt *transport, struct socket *sock)
{
- unsigned short port = transport->port;
+ unsigned short port = transport->srcport;
if (port == 0 && transport->xprt.resvport)
port = xs_get_random_port();
@@ -1614,8 +1547,8 @@
static unsigned short xs_next_srcport(struct sock_xprt *transport, struct socket *sock, unsigned short port)
{
- if (transport->port != 0)
- transport->port = 0;
+ if (transport->srcport != 0)
+ transport->srcport = 0;
if (!transport->xprt.resvport)
return 0;
if (port <= xprt_min_resvport || port > xprt_max_resvport)
@@ -1633,7 +1566,7 @@
unsigned short port = xs_get_srcport(transport, sock);
unsigned short last;
- sa = (struct sockaddr_in *)&transport->addr;
+ sa = (struct sockaddr_in *)&transport->srcaddr;
myaddr.sin_addr = sa->sin_addr;
do {
myaddr.sin_port = htons(port);
@@ -1642,7 +1575,7 @@
if (port == 0)
break;
if (err == 0) {
- transport->port = port;
+ transport->srcport = port;
break;
}
last = port;
@@ -1666,7 +1599,7 @@
unsigned short port = xs_get_srcport(transport, sock);
unsigned short last;
- sa = (struct sockaddr_in6 *)&transport->addr;
+ sa = (struct sockaddr_in6 *)&transport->srcaddr;
myaddr.sin6_addr = sa->sin6_addr;
do {
myaddr.sin6_port = htons(port);
@@ -1675,7 +1608,7 @@
if (port == 0)
break;
if (err == 0) {
- transport->port = port;
+ transport->srcport = port;
break;
}
last = port;
@@ -1780,8 +1713,11 @@
goto out;
}
- dprintk("RPC: worker connecting xprt %p to address: %s\n",
- xprt, xprt->address_strings[RPC_DISPLAY_ALL]);
+ dprintk("RPC: worker connecting xprt %p via %s to "
+ "%s (port %s)\n", xprt,
+ xprt->address_strings[RPC_DISPLAY_PROTO],
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT]);
xs_udp_finish_connecting(xprt, sock);
status = 0;
@@ -1822,8 +1758,11 @@
goto out;
}
- dprintk("RPC: worker connecting xprt %p to address: %s\n",
- xprt, xprt->address_strings[RPC_DISPLAY_ALL]);
+ dprintk("RPC: worker connecting xprt %p via %s to "
+ "%s (port %s)\n", xprt,
+ xprt->address_strings[RPC_DISPLAY_PROTO],
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT]);
xs_udp_finish_connecting(xprt, sock);
status = 0;
@@ -1948,8 +1887,11 @@
goto out_eagain;
}
- dprintk("RPC: worker connecting xprt %p to address: %s\n",
- xprt, xprt->address_strings[RPC_DISPLAY_ALL]);
+ dprintk("RPC: worker connecting xprt %p via %s to "
+ "%s (port %s)\n", xprt,
+ xprt->address_strings[RPC_DISPLAY_PROTO],
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT]);
status = xs_tcp_finish_connecting(xprt, sock);
dprintk("RPC: %p connect status %d connected %d sock state %d\n",
@@ -2120,7 +2062,7 @@
struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
seq_printf(seq, "\txprt:\tudp %u %lu %lu %lu %lu %Lu %Lu\n",
- transport->port,
+ transport->srcport,
xprt->stat.bind_count,
xprt->stat.sends,
xprt->stat.recvs,
@@ -2144,7 +2086,7 @@
idle_time = (long)(jiffies - xprt->last_used) / HZ;
seq_printf(seq, "\txprt:\ttcp %u %lu %lu %lu %ld %lu %lu %lu %Lu %Lu\n",
- transport->port,
+ transport->srcport,
xprt->stat.bind_count,
xprt->stat.connect_count,
xprt->stat.connect_time,
@@ -2223,7 +2165,7 @@
memcpy(&xprt->addr, args->dstaddr, args->addrlen);
xprt->addrlen = args->addrlen;
if (args->srcaddr)
- memcpy(&new->addr, args->srcaddr, args->addrlen);
+ memcpy(&new->srcaddr, args->srcaddr, args->addrlen);
return xprt;
}
@@ -2272,7 +2214,7 @@
INIT_DELAYED_WORK(&transport->connect_worker,
xs_udp_connect_worker4);
- xs_format_ipv4_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP);
+ xs_format_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP);
break;
case AF_INET6:
if (((struct sockaddr_in6 *)addr)->sin6_port != htons(0))
@@ -2280,15 +2222,22 @@
INIT_DELAYED_WORK(&transport->connect_worker,
xs_udp_connect_worker6);
- xs_format_ipv6_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP6);
+ xs_format_peer_addresses(xprt, "udp", RPCBIND_NETID_UDP6);
break;
default:
kfree(xprt);
return ERR_PTR(-EAFNOSUPPORT);
}
- dprintk("RPC: set up transport to address %s\n",
- xprt->address_strings[RPC_DISPLAY_ALL]);
+ if (xprt_bound(xprt))
+ dprintk("RPC: set up xprt to %s (port %s) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
+ else
+ dprintk("RPC: set up xprt to %s (autobind) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
if (try_module_get(THIS_MODULE))
return xprt;
@@ -2337,23 +2286,33 @@
if (((struct sockaddr_in *)addr)->sin_port != htons(0))
xprt_set_bound(xprt);
- INIT_DELAYED_WORK(&transport->connect_worker, xs_tcp_connect_worker4);
- xs_format_ipv4_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP);
+ INIT_DELAYED_WORK(&transport->connect_worker,
+ xs_tcp_connect_worker4);
+ xs_format_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP);
break;
case AF_INET6:
if (((struct sockaddr_in6 *)addr)->sin6_port != htons(0))
xprt_set_bound(xprt);
- INIT_DELAYED_WORK(&transport->connect_worker, xs_tcp_connect_worker6);
- xs_format_ipv6_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP6);
+ INIT_DELAYED_WORK(&transport->connect_worker,
+ xs_tcp_connect_worker6);
+ xs_format_peer_addresses(xprt, "tcp", RPCBIND_NETID_TCP6);
break;
default:
kfree(xprt);
return ERR_PTR(-EAFNOSUPPORT);
}
- dprintk("RPC: set up transport to address %s\n",
- xprt->address_strings[RPC_DISPLAY_ALL]);
+ if (xprt_bound(xprt))
+ dprintk("RPC: set up xprt to %s (port %s) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PORT],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
+ else
+ dprintk("RPC: set up xprt to %s (autobind) via %s\n",
+ xprt->address_strings[RPC_DISPLAY_ADDR],
+ xprt->address_strings[RPC_DISPLAY_PROTO]);
+
if (try_module_get(THIS_MODULE))
return xprt;
@@ -2412,3 +2371,55 @@
xprt_unregister_transport(&xs_udp_transport);
xprt_unregister_transport(&xs_tcp_transport);
}
+
+static int param_set_uint_minmax(const char *val, struct kernel_param *kp,
+ unsigned int min, unsigned int max)
+{
+ unsigned long num;
+ int ret;
+
+ if (!val)
+ return -EINVAL;
+ ret = strict_strtoul(val, 0, &num);
+ if (ret == -EINVAL || num < min || num > max)
+ return -EINVAL;
+ *((unsigned int *)kp->arg) = num;
+ return 0;
+}
+
+static int param_set_portnr(const char *val, struct kernel_param *kp)
+{
+ return param_set_uint_minmax(val, kp,
+ RPC_MIN_RESVPORT,
+ RPC_MAX_RESVPORT);
+}
+
+static int param_get_portnr(char *buffer, struct kernel_param *kp)
+{
+ return param_get_uint(buffer, kp);
+}
+#define param_check_portnr(name, p) \
+ __param_check(name, p, unsigned int);
+
+module_param_named(min_resvport, xprt_min_resvport, portnr, 0644);
+module_param_named(max_resvport, xprt_max_resvport, portnr, 0644);
+
+static int param_set_slot_table_size(const char *val, struct kernel_param *kp)
+{
+ return param_set_uint_minmax(val, kp,
+ RPC_MIN_SLOT_TABLE,
+ RPC_MAX_SLOT_TABLE);
+}
+
+static int param_get_slot_table_size(char *buffer, struct kernel_param *kp)
+{
+ return param_get_uint(buffer, kp);
+}
+#define param_check_slot_table_size(name, p) \
+ __param_check(name, p, unsigned int);
+
+module_param_named(tcp_slot_table_entries, xprt_tcp_slot_table_entries,
+ slot_table_size, 0644);
+module_param_named(udp_slot_table_entries, xprt_udp_slot_table_entries,
+ slot_table_size, 0644);
+
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 36d4e44..fc3ebb9 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -315,7 +315,7 @@
{
read_lock(&sk->sk_callback_lock);
if (unix_writable(sk)) {
- if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ if (sk_has_sleeper(sk))
wake_up_interruptible_sync(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
}
@@ -1985,7 +1985,7 @@
struct sock *sk = sock->sk;
unsigned int mask;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* exceptional events? */
@@ -2022,7 +2022,7 @@
struct sock *sk = sock->sk, *other;
unsigned int mask, writable;
- poll_wait(file, sk->sk_sleep, wait);
+ sock_poll_wait(file, sk->sk_sleep, wait);
mask = 0;
/* exceptional events? */
@@ -2053,7 +2053,7 @@
other = unix_peer_get(sk);
if (other) {
if (unix_peer(other) != sk) {
- poll_wait(file, &unix_sk(other)->peer_wait,
+ sock_poll_wait(file, &unix_sk(other)->peer_wait,
wait);
if (unix_recvq_full(other))
writable = 0;
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index 466e2d2..258daa8 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -48,6 +48,7 @@
#include <linux/kernel.h>
#include <linux/module.h> /* support for loadable modules */
#include <linux/slab.h> /* kmalloc(), kfree() */
+#include <linux/smp_lock.h>
#include <linux/mm.h>
#include <linux/string.h> /* inline mem*, str* functions */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 241bddd..634496b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -447,6 +447,7 @@
rdev = __cfg80211_drv_from_info(info);
if (IS_ERR(rdev)) {
+ mutex_unlock(&cfg80211_mutex);
result = PTR_ERR(rdev);
goto unlock;
}
@@ -996,7 +997,7 @@
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
- goto out;
+ goto free_msg;
}
cookie.msg = msg;
@@ -1010,7 +1011,7 @@
&cookie, get_key_callback);
if (err)
- goto out;
+ goto free_msg;
if (cookie.error)
goto nla_put_failure;
@@ -1021,6 +1022,7 @@
nla_put_failure:
err = -ENOBUFS;
+ free_msg:
nlmsg_free(msg);
out:
cfg80211_put_dev(drv);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 5e14371..75a406d 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1089,17 +1089,18 @@
chan->beacon_found = true;
+ if (wiphy->disable_beacon_hints)
+ return;
+
chan_before.center_freq = chan->center_freq;
chan_before.flags = chan->flags;
- if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
- !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+ if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
channel_changed = true;
}
- if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
- !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
+ if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
channel_changed = true;
}
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index e37829a..4e167a8 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -30,7 +30,8 @@
* non-radar 5 GHz channels.
*
* Drivers do not need to call this, cfg80211 will do it for after a scan
- * on a newly found BSS.
+ * on a newly found BSS. If you cannot make use of this feature you can
+ * set the wiphy->disable_beacon_hints to true.
*/
int regulatory_hint_found_beacon(struct wiphy *wiphy,
struct ieee80211_channel *beacon_chan,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e95b638..7e595ce 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -35,8 +35,6 @@
else
nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
- wiphy_to_dev(request->wiphy)->scan_req = NULL;
-
#ifdef CONFIG_WIRELESS_EXT
if (!aborted) {
memset(&wrqu, 0, sizeof(wrqu));
@@ -48,6 +46,7 @@
dev_put(dev);
out:
+ wiphy_to_dev(request->wiphy)->scan_req = NULL;
kfree(request);
}
EXPORT_SYMBOL(cfg80211_scan_done);
@@ -119,7 +118,7 @@
if (!ie1 && !ie2)
return 0;
- if (!ie1)
+ if (!ie1 || !ie2)
return -1;
r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
@@ -172,6 +171,8 @@
ie = find_ie(WLAN_EID_MESH_CONFIG,
a->information_elements,
a->len_information_elements);
+ if (!ie)
+ return false;
if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
return false;
@@ -366,7 +367,6 @@
found = rb_find_bss(dev, res);
if (found) {
- kref_get(&found->ref);
found->pub.beacon_interval = res->pub.beacon_interval;
found->pub.tsf = res->pub.tsf;
found->pub.signal = res->pub.signal;
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 21cdc87..5e6c072 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -40,6 +40,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/net.h>
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index d31ccb4..faf54c6 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -292,8 +292,8 @@
}
},
{
- .name = "cbc(cast128)",
- .compat = "cast128",
+ .name = "cbc(cast5)",
+ .compat = "cast5",
.uinfo = {
.encr = {
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 5f1f865..f2f7c63 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -668,22 +668,10 @@
hlist_for_each_entry(x, entry, net->xfrm.state_byspi+h, byspi) {
if (x->props.family != family ||
x->id.spi != spi ||
- x->id.proto != proto)
+ x->id.proto != proto ||
+ xfrm_addr_cmp(&x->id.daddr, daddr, family))
continue;
- switch (family) {
- case AF_INET:
- if (x->id.daddr.a4 != daddr->a4)
- continue;
- break;
- case AF_INET6:
- if (!ipv6_addr_equal((struct in6_addr *)daddr,
- (struct in6_addr *)
- x->id.daddr.a6))
- continue;
- break;
- }
-
xfrm_state_hold(x);
return x;
}
@@ -699,26 +687,11 @@
hlist_for_each_entry(x, entry, net->xfrm.state_bysrc+h, bysrc) {
if (x->props.family != family ||
- x->id.proto != proto)
+ x->id.proto != proto ||
+ xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+ xfrm_addr_cmp(&x->props.saddr, saddr, family))
continue;
- switch (family) {
- case AF_INET:
- if (x->id.daddr.a4 != daddr->a4 ||
- x->props.saddr.a4 != saddr->a4)
- continue;
- break;
- case AF_INET6:
- if (!ipv6_addr_equal((struct in6_addr *)daddr,
- (struct in6_addr *)
- x->id.daddr.a6) ||
- !ipv6_addr_equal((struct in6_addr *)saddr,
- (struct in6_addr *)
- x->props.saddr.a6))
- continue;
- break;
- }
-
xfrm_state_hold(x);
return x;
}
@@ -1001,25 +974,11 @@
x->props.family != family ||
x->km.state != XFRM_STATE_ACQ ||
x->id.spi != 0 ||
- x->id.proto != proto)
+ x->id.proto != proto ||
+ xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+ xfrm_addr_cmp(&x->props.saddr, saddr, family))
continue;
- switch (family) {
- case AF_INET:
- if (x->id.daddr.a4 != daddr->a4 ||
- x->props.saddr.a4 != saddr->a4)
- continue;
- break;
- case AF_INET6:
- if (!ipv6_addr_equal((struct in6_addr *)x->id.daddr.a6,
- (struct in6_addr *)daddr) ||
- !ipv6_addr_equal((struct in6_addr *)
- x->props.saddr.a6,
- (struct in6_addr *)saddr))
- continue;
- break;
- }
-
xfrm_state_hold(x);
return x;
}
diff --git a/samples/trace_events/trace-events-sample.h b/samples/trace_events/trace-events-sample.h
index 9977a75..f24ae37 100644
--- a/samples/trace_events/trace-events-sample.h
+++ b/samples/trace_events/trace-events-sample.h
@@ -1,21 +1,4 @@
/*
- * Notice that this file is not protected like a normal header.
- * We also must allow for rereading of this file. The
- *
- * || defined(TRACE_HEADER_MULTI_READ)
- *
- * serves this purpose.
- */
-#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EVENT_SAMPLE_H
-
-/*
- * All trace headers should include tracepoint.h, until we finally
- * make it into a standard header.
- */
-#include <linux/tracepoint.h>
-
-/*
* If TRACE_SYSTEM is defined, that will be the directory created
* in the ftrace directory under /debugfs/tracing/events/<system>
*
@@ -34,11 +17,31 @@
* #define TRACE_INCLUDE_FILE trace-events-sample
*
* As we do an the bottom of this file.
+ *
+ * Notice that TRACE_SYSTEM should be defined outside of #if
+ * protection, just like TRACE_INCLUDE_FILE.
*/
#undef TRACE_SYSTEM
#define TRACE_SYSTEM sample
/*
+ * Notice that this file is not protected like a normal header.
+ * We also must allow for rereading of this file. The
+ *
+ * || defined(TRACE_HEADER_MULTI_READ)
+ *
+ * serves this purpose.
+ */
+#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENT_SAMPLE_H
+
+/*
+ * All trace headers should include tracepoint.h, until we finally
+ * make it into a standard header.
+ */
+#include <linux/tracepoint.h>
+
+/*
* The TRACE_EVENT macro is broken up into 5 parts.
*
* name: name of the trace point. This is also how to enable the tracepoint.
diff --git a/scripts/.gitignore b/scripts/.gitignore
index b939fbd..52cab46a 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -7,3 +7,4 @@
bin2c
unifdef
binoffset
+ihex2fw
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
new file mode 100644
index 0000000..095acb4
--- /dev/null
+++ b/scripts/dtc/.gitignore
@@ -0,0 +1,5 @@
+dtc
+dtc-lexer.lex.c
+dtc-parser.tab.c
+dtc-parser.tab.h
+
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 3e73314..278a45b 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
use strict;
my $P = $0;
-my $V = '0.16';
+my $V = '0.17';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -27,6 +27,7 @@
my $email_git_penguin_chiefs = 0;
my $email_git_min_signatures = 1;
my $email_git_max_maintainers = 5;
+my $email_git_min_percent = 5;
my $email_git_since = "1-year-ago";
my $output_multiline = 1;
my $output_separator = ", ";
@@ -65,6 +66,7 @@
'git-chief-penguins!' => \$email_git_penguin_chiefs,
'git-min-signatures=i' => \$email_git_min_signatures,
'git-max-maintainers=i' => \$email_git_max_maintainers,
+ 'git-min-percent=i' => \$email_git_min_percent,
'git-since=s' => \$email_git_since,
'm!' => \$email_maintainer,
'n!' => \$email_usename,
@@ -132,6 +134,10 @@
$value =~ s@\.@\\\.@g; ##Convert . to \.
$value =~ s/\*/\.\*/g; ##Convert * to .*
$value =~ s/\?/\./g; ##Convert ? to .
+ ##if pattern is a directory and it lacks a trailing slash, add one
+ if ((-d $value)) {
+ $value =~ s@([^/])$@$1/@;
+ }
}
push(@typevalue, "$type:$value");
} elsif (!/^(\s)*$/) {
@@ -146,8 +152,10 @@
my @files = ();
foreach my $file (@ARGV) {
- next if ((-d $file));
- if (!(-f $file)) {
+ ##if $file is a directory and it lacks a trailing slash, add one
+ if ((-d $file)) {
+ $file =~ s@([^/])$@$1/@;
+ } elsif (!(-f $file)) {
die "$P: file '${file}' not found\n";
}
if ($from_filename) {
@@ -292,7 +300,7 @@
sub usage {
print <<EOT;
usage: $P [options] patchfile
- $P [options] -f file
+ $P [options] -f file|directory
version: $V
MAINTAINER field selection options:
@@ -301,6 +309,7 @@
--git-chief-penguins => include ${penguin_chiefs}
--git-min-signatures => number of signatures required (default: 1)
--git-max-maintainers => maximum maintainers to add (default: 5)
+ --git-min-percent => minimum percentage of commits required (default: 5)
--git-since => git history to use (default: 1-year-ago)
--m => include maintainer(s) if any
--n => include name 'Full Name <addr\@domain.tld>'
@@ -322,6 +331,15 @@
--version => show version
--help => show this help information
+Notes:
+ Using "-f directory" may give unexpected results:
+
+ Used with "--git", git signators for _all_ files in and below
+ directory are examined as git recurses directories.
+ Any specified X: (exclude) pattern matches are _not_ ignored.
+ Used with "--nogit", directory is used as a pattern match,
+ no individual file within the directory or subdirectory
+ is matched.
EOT
}
@@ -482,6 +500,7 @@
my $output = "";
my $count = 0;
my @lines = ();
+ my $total_sign_offs;
if (which("git") eq "") {
warn("$P: git not found. Add --nogit to options?\n");
@@ -505,17 +524,26 @@
$output =~ s/^\s*//gm;
@lines = split("\n", $output);
+
+ $total_sign_offs = 0;
+ foreach my $line (@lines) {
+ if ($line =~ m/([0-9]+)\s+(.*)/) {
+ $total_sign_offs += $1;
+ } else {
+ die("$P: Unexpected git output: ${line}\n");
+ }
+ }
+
foreach my $line (@lines) {
if ($line =~ m/([0-9]+)\s+(.*)/) {
my $sign_offs = $1;
$line = $2;
$count++;
if ($sign_offs < $email_git_min_signatures ||
- $count > $email_git_max_maintainers) {
+ $count > $email_git_max_maintainers ||
+ $sign_offs * 100 / $total_sign_offs < $email_git_min_percent) {
last;
}
- } else {
- die("$P: Unexpected git output: ${line}\n");
}
if ($line =~ m/(.+)<(.+)>/) {
my $git_name = $1;
diff --git a/scripts/kconfig/lxdialog/util.c b/scripts/kconfig/lxdialog/util.c
index 86d95cc..f2375ad 100644
--- a/scripts/kconfig/lxdialog/util.c
+++ b/scripts/kconfig/lxdialog/util.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <stdarg.h>
+
#include "dialog.h"
struct dialog_info dlg;
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 3bcacb4..25b60bc 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -888,6 +888,8 @@
single_menu_mode = 1;
}
+ initscr();
+
getyx(stdscr, saved_y, saved_x);
if (init_dialog(NULL)) {
fprintf(stderr, N_("Your display is too small to run Menuconfig!\n"));
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index ed591e9..b52d340 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1426,6 +1426,8 @@
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
+ # strip kmemcheck_bitfield_{begin,end}.*;
+ $members =~ s/kmemcheck_bitfield_.*?;//gos;
create_parameterlist($members, ';', $file);
check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested);
@@ -1468,8 +1470,6 @@
}
}
- # strip kmemcheck_bitfield_{begin,end}.*;
- $members =~ s/kmemcheck_bitfield_.*?;//gos;
output_declaration($declaration_name,
'enum',
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 528492b..8977401 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,6 +1,7 @@
#!/usr/bin/perl
use File::Basename;
+use Math::BigInt;
# Copyright 2008, Intel Corporation
#
@@ -172,8 +173,8 @@
parse_x86_regs($line);
}
-my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = hex($target) + 8192;
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
if ($target eq "0") {
print "No oops found!\n";
print "Usage: \n";
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 01c2d13..8b357b0 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -16,6 +16,8 @@
local pname="$1" pdir="$2"
cp debian/copyright "$pdir/usr/share/doc/$pname/"
+ cp debian/changelog "$pdir/usr/share/doc/$pname/changelog.Debian"
+ gzip -9 "$pdir/usr/share/doc/$pname/changelog.Debian"
# Fix ownership and permissions
chown -R root:root "$pdir"
@@ -87,7 +89,7 @@
set -e
# Pass maintainer script parameters to hook scripts
-export DEB_MAINT_PARAMS="\$@"
+export DEB_MAINT_PARAMS="\$*"
test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
exit 0
diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c
index 64f5ddb..5c11312 100644
--- a/scripts/pnmtologo.c
+++ b/scripts/pnmtologo.c
@@ -237,7 +237,7 @@
fprintf(out, " * Linux logo %s\n", logoname);
fputs(" */\n\n", out);
fputs("#include <linux/linux_logo.h>\n\n", out);
- fprintf(out, "static const unsigned char %s_data[] __initconst = {\n",
+ fprintf(out, "static unsigned char %s_data[] __initdata = {\n",
logoname);
}
@@ -374,7 +374,7 @@
fputs("\n};\n\n", out);
/* write logo clut */
- fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n",
+ fprintf(out, "static unsigned char %s_clut[] __initdata = {\n",
logoname);
write_hex_cnt = 0;
for (i = 0; i < logo_clutsize; i++) {
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 7109e2b..911ba7f 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -393,7 +393,7 @@
$read_function = 0;
}
# print out any recorded offsets
- update_funcs() if ($text_found);
+ update_funcs() if (defined($ref_func));
# reset all markers and arrays
$text_found = 0;
@@ -403,7 +403,6 @@
# section found, now is this a start of a function?
} elsif ($read_function && /$function_regex/) {
$text_found = 1;
- $offset = hex $1;
$text = $2;
# if this is either a local function or a weak function
@@ -412,10 +411,15 @@
if (!defined($locals{$text}) && !defined($weak{$text})) {
$ref_func = $text;
$read_function = 0;
+ $offset = hex $1;
} else {
# if we already have a function, and this is weak, skip it
- if (!defined($ref_func) || !defined($weak{$text})) {
+ if (!defined($ref_func) && !defined($weak{$text}) &&
+ # PPC64 can have symbols that start with .L and
+ # gcc considers these special. Don't use them!
+ $text !~ /^\.L/) {
$ref_func = $text;
+ $offset = hex $1;
}
}
} elsif ($read_headers && /$mcount_section/) {
@@ -440,7 +444,7 @@
}
# dump out anymore offsets that may have been found
-update_funcs() if ($text_found);
+update_funcs() if (defined($ref_func));
# If we did not find any mcount callers, we are done (do nothing).
if (!$opened) {
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 6f61187..101c512 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -238,7 +238,34 @@
}
/*
- * ima_opens_get - increment file counts
+ * ima_counts_put - decrement file counts
+ *
+ * File counts are incremented in ima_path_check. On file open
+ * error, such as ETXTBSY, decrement the counts to prevent
+ * unnecessary imbalance messages.
+ */
+void ima_counts_put(struct path *path, int mask)
+{
+ struct inode *inode = path->dentry->d_inode;
+ struct ima_iint_cache *iint;
+
+ if (!ima_initialized || !S_ISREG(inode->i_mode))
+ return;
+ iint = ima_iint_find_insert_get(inode);
+ if (!iint)
+ return;
+
+ mutex_lock(&iint->mutex);
+ iint->opencount--;
+ if ((mask & MAY_WRITE) || (mask == 0))
+ iint->writecount--;
+ else if (mask & (MAY_READ | MAY_EXEC))
+ iint->readcount--;
+ mutex_unlock(&iint->mutex);
+}
+
+/*
+ * ima_counts_get - increment file counts
*
* - for IPC shm and shmat file.
* - for nfsd exported files.
diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c
index 7ec9431..a0880e9 100644
--- a/security/integrity/ima/ima_queue.c
+++ b/security/integrity/ima/ima_queue.c
@@ -134,7 +134,8 @@
}
out:
mutex_unlock(&ima_extend_list_mutex);
- integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, entry->template_name,
+ integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
+ entry->template.file_name,
op, audit_cause, result, audit_info);
return result;
}
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 15c2a08..1e8cfc4 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1285,6 +1285,8 @@
rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX,
context, len);
if (rc == -ERANGE) {
+ kfree(context);
+
/* Need a larger buffer. Query for the right size. */
rc = inode->i_op->getxattr(dentry, XATTR_NAME_SELINUX,
NULL, 0);
@@ -1292,7 +1294,6 @@
dput(dentry);
goto out_unlock;
}
- kfree(context);
len = rc;
context = kmalloc(len+1, GFP_NOFS);
if (!context) {
diff --git a/sound/aoa/core/gpio-pmf.c b/sound/aoa/core/gpio-pmf.c
index 5ca2220..1dd0c28 100644
--- a/sound/aoa/core/gpio-pmf.c
+++ b/sound/aoa/core/gpio-pmf.c
@@ -182,6 +182,10 @@
if (!old && notify) {
irq_client = kzalloc(sizeof(struct pmf_irq_client),
GFP_KERNEL);
+ if (!irq_client) {
+ err = -ENOMEM;
+ goto out_unlock;
+ }
irq_client->data = notif;
irq_client->handler = pmf_handle_notify_irq;
irq_client->owner = THIS_MODULE;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 108b6432..6205f37 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -75,7 +75,7 @@
{
struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
- if (rtd && rtd->params)
+ if (rtd && rtd->params && rtd->params->drcmr)
*rtd->params->drcmr = 0;
snd_pcm_set_runtime_buffer(substream, NULL);
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 333e4dd..72cfd47 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -233,6 +233,18 @@
xrun(substream);
return -EPIPE;
}
+ if (xrun_debug(substream, 8)) {
+ char name[16];
+ pcm_debug_name(substream, name, sizeof(name));
+ snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, "
+ "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+ name, (unsigned int)pos,
+ (unsigned int)runtime->period_size,
+ (unsigned int)runtime->buffer_size,
+ (unsigned long)old_hw_ptr,
+ (unsigned long)runtime->hw_ptr_base,
+ (unsigned long)runtime->hw_ptr_interrupt);
+ }
hw_base = runtime->hw_ptr_base;
new_hw_ptr = hw_base + pos;
hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size;
@@ -244,18 +256,27 @@
delta = new_hw_ptr - hw_ptr_interrupt;
}
if (delta < 0) {
- delta += runtime->buffer_size;
+ if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr)
+ delta += runtime->buffer_size;
if (delta < 0) {
hw_ptr_error(substream,
"Unexpected hw_pointer value "
"(stream=%i, pos=%ld, intr_ptr=%ld)\n",
substream->stream, (long)pos,
(long)hw_ptr_interrupt);
+#if 1
+ /* simply skipping the hwptr update seems more
+ * robust in some cases, e.g. on VMware with
+ * inaccurate timer source
+ */
+ return 0; /* skip this update */
+#else
/* rebase to interrupt position */
hw_base = new_hw_ptr = hw_ptr_interrupt;
/* align hw_base to buffer_size */
hw_base -= hw_base % runtime->buffer_size;
delta = 0;
+#endif
} else {
hw_base += runtime->buffer_size;
if (hw_base >= runtime->boundary)
@@ -344,6 +365,19 @@
xrun(substream);
return -EPIPE;
}
+ if (xrun_debug(substream, 16)) {
+ char name[16];
+ pcm_debug_name(substream, name, sizeof(name));
+ snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, "
+ "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+ name, (unsigned int)pos,
+ (unsigned int)runtime->period_size,
+ (unsigned int)runtime->buffer_size,
+ (unsigned long)old_hw_ptr,
+ (unsigned long)runtime->hw_ptr_base,
+ (unsigned long)runtime->hw_ptr_interrupt);
+ }
+
hw_base = runtime->hw_ptr_base;
new_hw_ptr = hw_base + pos;
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 1bcb360..941f64a 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -3,10 +3,6 @@
# Copyright (c) 1999 by Jaroslav Kysela <perex@perex.cz>
#
-ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
- obj-$(CONFIG_SND_SEQUENCER) += oss/
-endif
-
snd-seq-device-objs := seq_device.o
snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \
seq_fifo.o seq_prioq.o seq_timer.o \
@@ -19,7 +15,8 @@
obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+ obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+ obj-$(CONFIG_SND_SEQUENCER) += oss/
endif
obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index de83608..3ee0269 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -338,7 +338,7 @@
return -EBUSY;
acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
- if (acard->play == NULL)
+ if (acard->mpu == NULL)
return -EBUSY;
pdev = acard->cap;
diff --git a/sound/isa/gus/gus_pcm.c b/sound/isa/gus/gus_pcm.c
index edb11ee..2dcf45b 100644
--- a/sound/isa/gus/gus_pcm.c
+++ b/sound/isa/gus/gus_pcm.c
@@ -795,13 +795,13 @@
if (!(pcmp->flags & SNDRV_GF1_PCM_PFLG_ACTIVE))
continue;
/* load real volume - better precision */
- spin_lock_irqsave(&gus->reg_lock, flags);
+ spin_lock(&gus->reg_lock);
snd_gf1_select_voice(gus, pvoice->number);
snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
vol = pvoice == pcmp->pvoices[0] ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right;
snd_gf1_write16(gus, SNDRV_GF1_VW_VOLUME, vol);
pcmp->final_volume = 1;
- spin_unlock_irqrestore(&gus->reg_lock, flags);
+ spin_unlock(&gus->reg_lock);
}
spin_unlock_irqrestore(&gus->voice_alloc, flags);
return change;
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c
index 3ee9900..35b5912 100644
--- a/sound/oss/aedsp16.c
+++ b/sound/oss/aedsp16.c
@@ -325,8 +325,9 @@
/*
* Size of character arrays that store name and version of sound card
*/
-#define CARDNAMELEN 15 /* Size of the card's name in chars */
-#define CARDVERLEN 2 /* Size of the card's version in chars */
+#define CARDNAMELEN 15 /* Size of the card's name in chars */
+#define CARDVERLEN 10 /* Size of the card's version in chars */
+#define CARDVERDIGITS 2 /* Number of digits in the version */
#if defined(CONFIG_SC6600)
/*
@@ -410,7 +411,7 @@
static int soft_cfg __initdata = 0; /* bitmapped config */
static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */
-static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver:
+static int ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver:
hi->ver[0] lo->ver[1] */
#if defined(CONFIG_SC6600)
@@ -957,7 +958,7 @@
* string is finished.
*/
ver[len++] = ret;
- } while (len < CARDVERLEN);
+ } while (len < CARDVERDIGITS);
sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
DBG(("success.\n"));
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index c180598..89466b0 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -199,7 +199,7 @@
*/
static struct pci_device_id id_tbl[] = {
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
{ }
};
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 6c0a770..734b8f9 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -926,31 +926,21 @@
static void mpu401_chk_version(int n, struct mpu_config *devc)
{
int tmp;
- unsigned long flags;
devc->version = devc->revision = 0;
- spin_lock_irqsave(&devc->lock,flags);
- if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
- {
- spin_unlock_irqrestore(&devc->lock,flags);
+ tmp = mpu_cmd(n, 0xAC, 0);
+ if (tmp < 0)
return;
- }
if ((tmp & 0xf0) > 0x20) /* Why it's larger than 2.x ??? */
- {
- spin_unlock_irqrestore(&devc->lock,flags);
return;
- }
devc->version = tmp;
- if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
- {
+ if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) {
devc->version = 0;
- spin_unlock_irqrestore(&devc->lock,flags);
return;
}
devc->revision = tmp;
- spin_unlock_irqrestore(&devc->lock,flags);
}
int attach_mpu401(struct address_info *hw_config, struct module *owner)
@@ -1084,7 +1074,7 @@
sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
else
sprintf(mpu_synth_info[m].name,
- "MPU-401 %d.%d%c Midi interface #%d",
+ "MPU-401 %d.%d%c MIDI #%d",
(int) (devc->version & 0xf0) >> 4,
devc->version & 0x0f,
revision_char,
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 71515dd..d6752df 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -287,10 +287,10 @@
/*
*/
static struct pci_device_id snd_atiixp_ids[] = {
- { 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
- { 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
- { 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
- { 0x1002, 0x4382, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB600 */
+ { PCI_VDEVICE(ATI, 0x4341), 0 }, /* SB200 */
+ { PCI_VDEVICE(ATI, 0x4361), 0 }, /* SB300 */
+ { PCI_VDEVICE(ATI, 0x4370), 0 }, /* SB400 */
+ { PCI_VDEVICE(ATI, 0x4382), 0 }, /* SB600 */
{ 0, }
};
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index c3136cc..e7e147b 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -262,8 +262,8 @@
/*
*/
static struct pci_device_id snd_atiixp_ids[] = {
- { 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
- { 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
+ { PCI_VDEVICE(ATI, 0x434d), 0 }, /* SB200 */
+ { PCI_VDEVICE(ATI, 0x4378), 0 }, /* SB400 */
{ 0, }
};
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index fce22c7..c0e8c6b 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,8 +1,7 @@
#include "au8810.h"
#include "au88x0.h"
static struct pci_device_id snd_vortex_ids[] = {
- {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
+ {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE), 1,},
{0,}
};
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index d1fbcce..a652733 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,8 +1,7 @@
#include "au8820.h"
#include "au88x0.h"
static struct pci_device_id snd_vortex_ids[] = {
- {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1), 0,},
{0,}
};
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index d4f2717..6c702ad 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,8 +1,7 @@
#include "au8830.h"
#include "au88x0.h"
static struct pci_device_id snd_vortex_ids[] = {
- {PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2), 0,},
{0,}
};
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 57b992a..15e4138 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -325,9 +325,9 @@
.rate_max = 192000,
.channels_min = 2,
.channels_max = 2,
- .buffer_bytes_max = ((65536 - 64) * 8),
+ .buffer_bytes_max = 65536 - 128,
.period_bytes_min = 64,
- .period_bytes_max = (65536 - 64),
+ .period_bytes_max = 32768 - 64,
.periods_min = 2,
.periods_max = 2,
.fifo_size = 0,
@@ -1876,7 +1876,7 @@
// PCI IDs
static struct pci_device_id snd_ca0106_ids[] = {
- { 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Audigy LS or Live 24bit */
+ { PCI_VDEVICE(CREATIVE, 0x0007), 0 }, /* Audigy LS or Live 24bit */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, snd_ca0106_ids);
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 449fe02..ddcd4a9 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2797,11 +2797,11 @@
static struct pci_device_id snd_cmipci_ids[] = {
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_AL, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A), 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B), 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
+ {PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B), 0},
+ {PCI_VDEVICE(AL, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
{0,},
};
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index f6286f8..e2e0359 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -495,7 +495,7 @@
static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id);
static struct pci_device_id snd_cs4281_ids[] = {
- { 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4281 */
+ { PCI_VDEVICE(CIRRUS, 0x6005), 0, }, /* CS4281 */
{ 0, }
};
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index c9b3e3d..033aec4 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -65,9 +65,9 @@
MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
static struct pci_device_id snd_cs46xx_ids[] = {
- { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4280 */
- { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4612 */
- { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* CS4615 */
+ { PCI_VDEVICE(CIRRUS, 0x6001), 0, }, /* CS4280 */
+ { PCI_VDEVICE(CIRRUS, 0x6003), 0, }, /* CS4612 */
+ { PCI_VDEVICE(CIRRUS, 0x6004), 0, }, /* CS4615 */
{ 0, }
};
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
index a1db51b3..a7f4a67 100644
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -242,13 +242,12 @@
/* Allocate mem for amixer resource */
amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
- if (NULL == amixer) {
- err = -ENOMEM;
- return err;
- }
+ if (!amixer)
+ return -ENOMEM;
/* Check whether there are sufficient
* amixer resources to meet request. */
+ err = 0;
spin_lock_irqsave(&mgr->mgr_lock, flags);
for (i = 0; i < desc->msr; i++) {
err = mgr_get_resource(&mgr->mgr, 1, &idx);
@@ -397,12 +396,11 @@
/* Allocate mem for sum resource */
sum = kzalloc(sizeof(*sum), GFP_KERNEL);
- if (NULL == sum) {
- err = -ENOMEM;
- return err;
- }
+ if (!sum)
+ return -ENOMEM;
/* Check whether there are sufficient sum resources to meet request. */
+ err = 0;
spin_lock_irqsave(&mgr->mgr_lock, flags);
for (i = 0; i < desc->msr; i++) {
err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
index 082e35c..deb6cfa 100644
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -57,9 +57,9 @@
struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
[LINEO1] = {.left = 0x40, .right = 0x41},
- [LINEO2] = {.left = 0x70, .right = 0x71},
+ [LINEO2] = {.left = 0x60, .right = 0x61},
[LINEO3] = {.left = 0x50, .right = 0x51},
- [LINEO4] = {.left = 0x60, .right = 0x61},
+ [LINEO4] = {.left = 0x70, .right = 0x71},
[LINEIM] = {.left = 0x45, .right = 0xc5},
[SPDIFOO] = {.left = 0x00, .right = 0x01},
[SPDIFIO] = {.left = 0x05, .right = 0x85},
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
index e1c145d..df43a5c 100644
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -724,12 +724,11 @@
/* Allocate mem for SRCIMP resource */
srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
- if (NULL == srcimp) {
- err = -ENOMEM;
- return err;
- }
+ if (!srcimp)
+ return -ENOMEM;
/* Check whether there are sufficient SRCIMP resources. */
+ err = 0;
spin_lock_irqsave(&mgr->mgr_lock, flags);
for (i = 0; i < desc->msr; i++) {
err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index c7f3b99..168af67 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -77,9 +77,9 @@
* Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value Model:SB0400
*/
static struct pci_device_id snd_emu10k1_ids[] = {
- { 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* EMU10K1 */
- { 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy */
- { 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, /* Audigy 2 Value SB0400 */
+ { PCI_VDEVICE(CREATIVE, 0x0002), 0 }, /* EMU10K1 */
+ { PCI_VDEVICE(CREATIVE, 0x0004), 1 }, /* Audigy */
+ { PCI_VDEVICE(CREATIVE, 0x0008), 1 }, /* Audigy 2 Value SB0400 */
{ 0, }
};
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 4d3ad79..36e08bd 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1607,7 +1607,7 @@
// PCI IDs
static struct pci_device_id snd_emu10k1x_ids[] = {
- { 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dell OEM version (EMU10K1) */
+ { PCI_VDEVICE(CREATIVE, 0x0006), 0 }, /* Dell OEM version (EMU10K1) */
{ 0, }
};
MODULE_DEVICE_TABLE(pci, snd_emu10k1x_ids);
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index e617aca..61b8ab3 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -644,7 +644,7 @@
int err;
int capture=1;
- /* snd_printk("KERN_DEBUG snd_p16v_pcm called. device=%d\n", device); */
+ /* snd_printk(KERN_DEBUG "snd_p16v_pcm called. device=%d\n", device); */
emu->p16v_device_offset = device;
if (rpcm)
*rpcm = NULL;
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 18f4d1e..2b82c5c 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -445,12 +445,12 @@
static struct pci_device_id snd_audiopci_ids[] = {
#ifdef CHIP1370
- { 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1370 */
+ { PCI_VDEVICE(ENSONIQ, 0x5000), 0, }, /* ES1370 */
#endif
#ifdef CHIP1371
- { 0x1274, 0x1371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1371 */
- { 0x1274, 0x5880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* ES1373 - CT5880 */
- { 0x1102, 0x8938, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Ectiva EV1938 */
+ { PCI_VDEVICE(ENSONIQ, 0x1371), 0, }, /* ES1371 */
+ { PCI_VDEVICE(ENSONIQ, 0x5880), 0, }, /* ES1373 - CT5880 */
+ { PCI_VDEVICE(ECTIVA, 0x8938), 0, }, /* Ectiva EV1938 */
#endif
{ 0, }
};
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index fbd2ac0..820318e 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -244,7 +244,7 @@
static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id);
static struct pci_device_id snd_es1938_ids[] = {
- { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* Solo-1 */
+ { PCI_VDEVICE(ESS, 0x1969), 0, }, /* Solo-1 */
{ 0, }
};
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 29272f2..b0275a0 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -50,19 +50,22 @@
* The tone frequency of beep generator on IDT/STAC codecs is
* defined from the 8bit tone parameter, in Hz,
* freq = 48000 * (257 - tone) / 1024
- * that is from 12kHz to 93.75kHz in step of 46.875 hz
+ * that is from 12kHz to 93.75Hz in steps of 46.875 Hz
*/
static int beep_linear_tone(struct hda_beep *beep, int hz)
{
+ if (hz <= 0)
+ return 0;
hz *= 1000; /* fixed point */
- hz = hz - DIGBEEP_HZ_MIN;
+ hz = hz - DIGBEEP_HZ_MIN
+ + DIGBEEP_HZ_STEP / 2; /* round to nearest step */
if (hz < 0)
hz = 0; /* turn off PC beep*/
else if (hz >= (DIGBEEP_HZ_MAX - DIGBEEP_HZ_MIN))
- hz = 0xff;
+ hz = 1; /* max frequency */
else {
hz /= DIGBEEP_HZ_STEP;
- hz++;
+ hz = 255 - hz;
}
return hz;
}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 462e2ce..c7df01b 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -174,7 +174,7 @@
mutex_lock(&bus->cmd_mutex);
err = bus->ops.command(bus, cmd);
if (!err && res)
- *res = bus->ops.get_response(bus);
+ *res = bus->ops.get_response(bus, codec->addr);
mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
if (res && *res == -1 && bus->rirb_error) {
@@ -332,6 +332,12 @@
AC_VERB_GET_CONNECT_LIST, i);
range_val = !!(parm & (1 << (shift-1))); /* ranges */
val = parm & mask;
+ if (val == 0) {
+ snd_printk(KERN_WARNING "hda_codec: "
+ "invalid CONNECT_LIST verb %x[%i]:%x\n",
+ nid, i, parm);
+ return 0;
+ }
parm >>= shift;
if (range_val) {
/* ranges between the previous and this one */
@@ -3470,10 +3476,16 @@
}
mutex_lock(&codec->spdif_mutex);
if (mout->share_spdif) {
- runtime->hw.rates &= mout->spdif_rates;
- runtime->hw.formats &= mout->spdif_formats;
- if (mout->spdif_maxbps < hinfo->maxbps)
- hinfo->maxbps = mout->spdif_maxbps;
+ if ((runtime->hw.rates & mout->spdif_rates) &&
+ (runtime->hw.formats & mout->spdif_formats)) {
+ runtime->hw.rates &= mout->spdif_rates;
+ runtime->hw.formats &= mout->spdif_formats;
+ if (mout->spdif_maxbps < hinfo->maxbps)
+ hinfo->maxbps = mout->spdif_maxbps;
+ } else {
+ mout->share_spdif = 0;
+ /* FIXME: need notify? */
+ }
}
mutex_unlock(&codec->spdif_mutex);
}
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index cad79ef..1b75f28 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -568,7 +568,7 @@
/* send a single command */
int (*command)(struct hda_bus *bus, unsigned int cmd);
/* get a response from the last command */
- unsigned int (*get_response)(struct hda_bus *bus);
+ unsigned int (*get_response)(struct hda_bus *bus, unsigned int addr);
/* free the private data */
void (*private_free)(struct hda_bus *);
/* attach a PCM stream */
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index fcad5ec..9446a5a 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -508,7 +508,7 @@
char name[64];
char *sname;
long long val;
- int n;
+ unsigned int n;
while (!snd_info_get_line(buffer, line, sizeof(line))) {
if (sscanf(line, "%s %llx", name, &val) != 2)
@@ -539,7 +539,7 @@
sname++;
n = 10 * n + name[4] - '0';
}
- if (n < 0 || n > 31) /* double the CEA limit */
+ if (n >= ELD_MAX_SAD)
continue;
if (!strcmp(sname, "_coding_type"))
e->sad[n].format = val;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4e9ea70..175f07a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -253,7 +253,7 @@
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define AZX_MAX_CODECS 4
-#define STATESTS_INT_MASK 0x0f
+#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1)
/* SD_CTL bits */
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
@@ -361,8 +361,8 @@
dma_addr_t addr; /* physical address of CORB/RIRB buffer */
/* for RIRB */
unsigned short rp, wp; /* read/write pointers */
- int cmds; /* number of pending requests */
- u32 res; /* last read value */
+ int cmds[AZX_MAX_CODECS]; /* number of pending requests */
+ u32 res[AZX_MAX_CODECS]; /* last read value */
};
struct azx {
@@ -418,7 +418,7 @@
unsigned int probing :1; /* codec probing phase */
/* for debugging */
- unsigned int last_cmd; /* last issued command (to sync) */
+ unsigned int last_cmd[AZX_MAX_CODECS];
/* for pending irqs */
struct work_struct irq_pending_work;
@@ -513,6 +513,7 @@
static void azx_init_cmd_io(struct azx *chip)
{
+ spin_lock_irq(&chip->reg_lock);
/* CORB set up */
chip->corb.addr = chip->rb.addr;
chip->corb.buf = (u32 *)chip->rb.area;
@@ -531,7 +532,8 @@
/* RIRB set up */
chip->rirb.addr = chip->rb.addr + 2048;
chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
- chip->rirb.wp = chip->rirb.rp = chip->rirb.cmds = 0;
+ chip->rirb.wp = chip->rirb.rp = 0;
+ memset(chip->rirb.cmds, 0, sizeof(chip->rirb.cmds));
azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
@@ -543,30 +545,60 @@
azx_writew(chip, RINTCNT, 1);
/* enable rirb dma and response irq */
azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
+ spin_unlock_irq(&chip->reg_lock);
}
static void azx_free_cmd_io(struct azx *chip)
{
+ spin_lock_irq(&chip->reg_lock);
/* disable ringbuffer DMAs */
azx_writeb(chip, RIRBCTL, 0);
azx_writeb(chip, CORBCTL, 0);
+ spin_unlock_irq(&chip->reg_lock);
+}
+
+static unsigned int azx_command_addr(u32 cmd)
+{
+ unsigned int addr = cmd >> 28;
+
+ if (addr >= AZX_MAX_CODECS) {
+ snd_BUG();
+ addr = 0;
+ }
+
+ return addr;
+}
+
+static unsigned int azx_response_addr(u32 res)
+{
+ unsigned int addr = res & 0xf;
+
+ if (addr >= AZX_MAX_CODECS) {
+ snd_BUG();
+ addr = 0;
+ }
+
+ return addr;
}
/* send a command */
static int azx_corb_send_cmd(struct hda_bus *bus, u32 val)
{
struct azx *chip = bus->private_data;
+ unsigned int addr = azx_command_addr(val);
unsigned int wp;
+ spin_lock_irq(&chip->reg_lock);
+
/* add command to corb */
wp = azx_readb(chip, CORBWP);
wp++;
wp %= ICH6_MAX_CORB_ENTRIES;
- spin_lock_irq(&chip->reg_lock);
- chip->rirb.cmds++;
+ chip->rirb.cmds[addr]++;
chip->corb.buf[wp] = cpu_to_le32(val);
azx_writel(chip, CORBWP, wp);
+
spin_unlock_irq(&chip->reg_lock);
return 0;
@@ -578,13 +610,14 @@
static void azx_update_rirb(struct azx *chip)
{
unsigned int rp, wp;
+ unsigned int addr;
u32 res, res_ex;
wp = azx_readb(chip, RIRBWP);
if (wp == chip->rirb.wp)
return;
chip->rirb.wp = wp;
-
+
while (chip->rirb.rp != wp) {
chip->rirb.rp++;
chip->rirb.rp %= ICH6_MAX_RIRB_ENTRIES;
@@ -592,18 +625,24 @@
rp = chip->rirb.rp << 1; /* an RIRB entry is 8-bytes */
res_ex = le32_to_cpu(chip->rirb.buf[rp + 1]);
res = le32_to_cpu(chip->rirb.buf[rp]);
+ addr = azx_response_addr(res_ex);
if (res_ex & ICH6_RIRB_EX_UNSOL_EV)
snd_hda_queue_unsol_event(chip->bus, res, res_ex);
- else if (chip->rirb.cmds) {
- chip->rirb.res = res;
+ else if (chip->rirb.cmds[addr]) {
+ chip->rirb.res[addr] = res;
smp_wmb();
- chip->rirb.cmds--;
- }
+ chip->rirb.cmds[addr]--;
+ } else
+ snd_printk(KERN_ERR SFX "spurious response %#x:%#x, "
+ "last cmd=%#08x\n",
+ res, res_ex,
+ chip->last_cmd[addr]);
}
}
/* receive a response */
-static unsigned int azx_rirb_get_response(struct hda_bus *bus)
+static unsigned int azx_rirb_get_response(struct hda_bus *bus,
+ unsigned int addr)
{
struct azx *chip = bus->private_data;
unsigned long timeout;
@@ -616,10 +655,10 @@
azx_update_rirb(chip);
spin_unlock_irq(&chip->reg_lock);
}
- if (!chip->rirb.cmds) {
+ if (!chip->rirb.cmds[addr]) {
smp_rmb();
bus->rirb_error = 0;
- return chip->rirb.res; /* the last value */
+ return chip->rirb.res[addr]; /* the last value */
}
if (time_after(jiffies, timeout))
break;
@@ -633,7 +672,8 @@
if (chip->msi) {
snd_printk(KERN_WARNING SFX "No response from codec, "
- "disabling MSI: last cmd=0x%08x\n", chip->last_cmd);
+ "disabling MSI: last cmd=0x%08x\n",
+ chip->last_cmd[addr]);
free_irq(chip->irq, chip);
chip->irq = -1;
pci_disable_msi(chip->pci);
@@ -648,7 +688,7 @@
if (!chip->polling_mode) {
snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
"switching to polling mode: last cmd=0x%08x\n",
- chip->last_cmd);
+ chip->last_cmd[addr]);
chip->polling_mode = 1;
goto again;
}
@@ -672,7 +712,7 @@
snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
"switching to single_cmd mode: last cmd=0x%08x\n",
- chip->last_cmd);
+ chip->last_cmd[addr]);
chip->single_cmd = 1;
bus->response_reset = 0;
/* re-initialize CORB/RIRB */
@@ -692,7 +732,7 @@
*/
/* receive a response */
-static int azx_single_wait_for_response(struct azx *chip)
+static int azx_single_wait_for_response(struct azx *chip, unsigned int addr)
{
int timeout = 50;
@@ -700,7 +740,7 @@
/* check IRV busy bit */
if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
/* reuse rirb.res as the response return value */
- chip->rirb.res = azx_readl(chip, IR);
+ chip->rirb.res[addr] = azx_readl(chip, IR);
return 0;
}
udelay(1);
@@ -708,7 +748,7 @@
if (printk_ratelimit())
snd_printd(SFX "get_response timeout: IRS=0x%x\n",
azx_readw(chip, IRS));
- chip->rirb.res = -1;
+ chip->rirb.res[addr] = -1;
return -EIO;
}
@@ -716,6 +756,7 @@
static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
{
struct azx *chip = bus->private_data;
+ unsigned int addr = azx_command_addr(val);
int timeout = 50;
bus->rirb_error = 0;
@@ -728,7 +769,7 @@
azx_writel(chip, IC, val);
azx_writew(chip, IRS, azx_readw(chip, IRS) |
ICH6_IRS_BUSY);
- return azx_single_wait_for_response(chip);
+ return azx_single_wait_for_response(chip, addr);
}
udelay(1);
}
@@ -739,10 +780,11 @@
}
/* receive a response */
-static unsigned int azx_single_get_response(struct hda_bus *bus)
+static unsigned int azx_single_get_response(struct hda_bus *bus,
+ unsigned int addr)
{
struct azx *chip = bus->private_data;
- return chip->rirb.res;
+ return chip->rirb.res[addr];
}
/*
@@ -757,7 +799,7 @@
{
struct azx *chip = bus->private_data;
- chip->last_cmd = val;
+ chip->last_cmd[azx_command_addr(val)] = val;
if (chip->single_cmd)
return azx_single_send_cmd(bus, val);
else
@@ -765,13 +807,14 @@
}
/* get a response */
-static unsigned int azx_get_response(struct hda_bus *bus)
+static unsigned int azx_get_response(struct hda_bus *bus,
+ unsigned int addr)
{
struct azx *chip = bus->private_data;
if (chip->single_cmd)
- return azx_single_get_response(bus);
+ return azx_single_get_response(bus, addr);
else
- return azx_rirb_get_response(bus);
+ return azx_rirb_get_response(bus, addr);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -1243,10 +1286,12 @@
(AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
unsigned int res;
+ mutex_lock(&chip->bus->cmd_mutex);
chip->probing = 1;
azx_send_cmd(chip->bus, cmd);
- res = azx_get_response(chip->bus);
+ res = azx_get_response(chip->bus, addr);
chip->probing = 0;
+ mutex_unlock(&chip->bus->cmd_mutex);
if (res == -1)
return -EIO;
snd_printdd(SFX "codec #%d probed OK\n", addr);
@@ -1454,6 +1499,18 @@
mutex_unlock(&chip->open_mutex);
return err;
}
+ snd_pcm_limit_hw_rates(runtime);
+ /* sanity check */
+ if (snd_BUG_ON(!runtime->hw.channels_min) ||
+ snd_BUG_ON(!runtime->hw.channels_max) ||
+ snd_BUG_ON(!runtime->hw.formats) ||
+ snd_BUG_ON(!runtime->hw.rates)) {
+ azx_release_device(azx_dev);
+ hinfo->ops.close(hinfo, apcm->codec, substream);
+ snd_hda_power_down(apcm->codec);
+ mutex_unlock(&chip->open_mutex);
+ return -EINVAL;
+ }
spin_lock_irqsave(&chip->reg_lock, flags);
azx_dev->substream = substream;
azx_dev->running = 0;
@@ -1462,7 +1519,6 @@
runtime->private_data = azx_dev;
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
-
return 0;
}
@@ -2322,9 +2378,19 @@
gcap = azx_readw(chip, GCAP);
snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap);
- /* ATI chips seems buggy about 64bit DMA addresses */
- if (chip->driver_type == AZX_DRIVER_ATI)
- gcap &= ~ICH6_GCAP_64OK;
+ /* disable SB600 64bit support for safety */
+ if ((chip->driver_type == AZX_DRIVER_ATI) ||
+ (chip->driver_type == AZX_DRIVER_ATIHDMI)) {
+ struct pci_dev *p_smbus;
+ p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ NULL);
+ if (p_smbus) {
+ if (p_smbus->revision < 0x30)
+ gcap &= ~ICH6_GCAP_64OK;
+ pci_dev_put(p_smbus);
+ }
+ }
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 84cc49c..3da85ca 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -72,6 +72,7 @@
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
unsigned int jack_present :1;
+ unsigned int inv_jack_detect:1;
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_loopback_check loopback;
@@ -669,13 +670,15 @@
},
};
-static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
+static struct snd_kcontrol_new ad1986a_laptop_master_mixers[] = {
HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
@@ -699,31 +702,9 @@
{ } /* end */
};
-static struct snd_kcontrol_new ad1986a_samsung_mixers[] = {
- HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
- HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
- HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "External Amplifier",
- .info = ad198x_eapd_info,
- .get = ad198x_eapd_get,
- .put = ad198x_eapd_put,
- .private_value = 0x1b | (1 << 8), /* port-D, inversed */
- },
+static struct snd_kcontrol_new ad1986a_laptop_intmic_mixers[] = {
+ HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
{ } /* end */
};
@@ -776,8 +757,9 @@
unsigned int present;
present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0);
- /* Lenovo N100 seems to report the reversed bit for HP jack-sensing */
- spec->jack_present = !(present & 0x80000000);
+ spec->jack_present = !!(present & 0x80000000);
+ if (spec->inv_jack_detect)
+ spec->jack_present = !spec->jack_present;
ad1986a_update_hp(codec);
}
@@ -816,7 +798,7 @@
return change;
}
-static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = {
+static struct snd_kcontrol_new ad1986a_automute_master_mixers[] = {
HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -826,33 +808,10 @@
.put = ad1986a_hp_master_sw_put,
.private_value = HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_OUTPUT),
},
- HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "External Amplifier",
- .info = ad198x_eapd_info,
- .get = ad198x_eapd_get,
- .put = ad198x_eapd_put,
- .private_value = 0x1b | (1 << 8), /* port-D, inversed */
- },
{ } /* end */
};
+
/*
* initialization verbs
*/
@@ -981,6 +940,27 @@
{}
};
+static void ad1986a_samsung_p50_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case AD1986A_HP_EVENT:
+ ad1986a_hp_automute(codec);
+ break;
+ case AD1986A_MIC_EVENT:
+ ad1986a_automic(codec);
+ break;
+ }
+}
+
+static int ad1986a_samsung_p50_init(struct hda_codec *codec)
+{
+ ad198x_init(codec);
+ ad1986a_hp_automute(codec);
+ ad1986a_automic(codec);
+ return 0;
+}
+
/* models */
enum {
@@ -991,6 +971,7 @@
AD1986A_LAPTOP_AUTOMUTE,
AD1986A_ULTRA,
AD1986A_SAMSUNG,
+ AD1986A_SAMSUNG_P50,
AD1986A_MODELS
};
@@ -1002,6 +983,7 @@
[AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute",
[AD1986A_ULTRA] = "ultra",
[AD1986A_SAMSUNG] = "samsung",
+ [AD1986A_SAMSUNG_P50] = "samsung-p50",
};
static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
@@ -1024,6 +1006,7 @@
SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
+ SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50),
SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA),
SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG),
SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK),
@@ -1111,7 +1094,10 @@
spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
break;
case AD1986A_LAPTOP_EAPD:
- spec->mixers[0] = ad1986a_laptop_eapd_mixers;
+ spec->num_mixers = 3;
+ spec->mixers[0] = ad1986a_laptop_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+ spec->mixers[2] = ad1986a_laptop_intmic_mixers;
spec->num_init_verbs = 2;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->multiout.max_channels = 2;
@@ -1122,7 +1108,9 @@
spec->input_mux = &ad1986a_laptop_eapd_capture_source;
break;
case AD1986A_SAMSUNG:
- spec->mixers[0] = ad1986a_samsung_mixers;
+ spec->num_mixers = 2;
+ spec->mixers[0] = ad1986a_laptop_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
spec->num_init_verbs = 3;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->init_verbs[2] = ad1986a_automic_verbs;
@@ -1135,8 +1123,28 @@
codec->patch_ops.unsol_event = ad1986a_automic_unsol_event;
codec->patch_ops.init = ad1986a_automic_init;
break;
+ case AD1986A_SAMSUNG_P50:
+ spec->num_mixers = 2;
+ spec->mixers[0] = ad1986a_automute_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+ spec->num_init_verbs = 4;
+ spec->init_verbs[1] = ad1986a_eapd_init_verbs;
+ spec->init_verbs[2] = ad1986a_automic_verbs;
+ spec->init_verbs[3] = ad1986a_hp_init_verbs;
+ spec->multiout.max_channels = 2;
+ spec->multiout.num_dacs = 1;
+ spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
+ if (!is_jack_available(codec, 0x25))
+ spec->multiout.dig_out_nid = 0;
+ spec->input_mux = &ad1986a_automic_capture_source;
+ codec->patch_ops.unsol_event = ad1986a_samsung_p50_unsol_event;
+ codec->patch_ops.init = ad1986a_samsung_p50_init;
+ break;
case AD1986A_LAPTOP_AUTOMUTE:
- spec->mixers[0] = ad1986a_laptop_automute_mixers;
+ spec->num_mixers = 3;
+ spec->mixers[0] = ad1986a_automute_master_mixers;
+ spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+ spec->mixers[2] = ad1986a_laptop_intmic_mixers;
spec->num_init_verbs = 3;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->init_verbs[2] = ad1986a_hp_init_verbs;
@@ -1148,6 +1156,10 @@
spec->input_mux = &ad1986a_laptop_eapd_capture_source;
codec->patch_ops.unsol_event = ad1986a_hp_unsol_event;
codec->patch_ops.init = ad1986a_hp_init;
+ /* Lenovo N100 seems to report the reversed bit
+ * for HP jack-sensing
+ */
+ spec->inv_jack_detect = 1;
break;
case AD1986A_ULTRA:
spec->mixers[0] = ad1986a_laptop_eapd_mixers;
@@ -3734,9 +3746,30 @@
{ } /* end */
};
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+ int mute = (!ucontrol->value.integer.value[0] &&
+ !ucontrol->value.integer.value[1]);
+ /* toggle GPIO1 according to the mute state */
+ snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ mute ? 0x02 : 0x0);
+ return ret;
+}
+
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+ /*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = ad1884a_mobile_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+ },
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
@@ -3857,6 +3890,10 @@
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ /* allow to touch GPIO1 (for mute control) */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
{ } /* end */
};
@@ -3966,6 +4003,7 @@
SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x3070, "HP", AD1884A_MOBILE),
+ SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30d0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x30e0, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index 392d108..019ca7c 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -510,7 +510,7 @@
}
-int patch_ca0110(struct hda_codec *codec)
+static int patch_ca0110(struct hda_codec *codec)
{
struct ca0110_spec *spec;
int err;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3345331..fea9767 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -275,13 +275,13 @@
*/
unsigned int num_init_verbs;
- char stream_name_analog[16]; /* analog PCM stream */
+ char stream_name_analog[32]; /* analog PCM stream */
struct hda_pcm_stream *stream_analog_playback;
struct hda_pcm_stream *stream_analog_capture;
struct hda_pcm_stream *stream_analog_alt_playback;
struct hda_pcm_stream *stream_analog_alt_capture;
- char stream_name_digital[16]; /* digital PCM stream */
+ char stream_name_digital[32]; /* digital PCM stream */
struct hda_pcm_stream *stream_digital_playback;
struct hda_pcm_stream *stream_digital_capture;
@@ -559,7 +559,7 @@
/* Find enumerated value for current pinctl setting */
i = alc_pin_mode_min(dir);
- while (alc_pin_mode_values[i] != pinctl && i <= alc_pin_mode_max(dir))
+ while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
i++;
*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
return 0;
@@ -945,12 +945,13 @@
static void alc_automute_pin(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int present;
+ unsigned int present, pincap;
unsigned int nid = spec->autocfg.hp_pins[0];
int i;
- /* need to execute and sync at first */
- snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ pincap = snd_hda_query_pin_caps(codec, nid);
+ if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
present = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
@@ -1392,7 +1393,7 @@
static void alc_automute_amp(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int val, mute;
+ unsigned int val, mute, pincap;
hda_nid_t nid;
int i;
@@ -1401,6 +1402,10 @@
nid = spec->autocfg.hp_pins[i];
if (!nid)
break;
+ pincap = snd_hda_query_pin_caps(codec, nid);
+ if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_SET_PIN_SENSE, 0);
val = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
if (val & AC_PINSENSE_PRESENCE) {
@@ -1471,6 +1476,10 @@
static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
/* Bias voltage on for external mic port */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
/* Enable unsolicited event for HP jack */
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Enable speaker output */
@@ -1560,18 +1569,22 @@
static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = {
/* Interal mic only available on one ADC */
{
- .num_items = 3,
+ .num_items = 5,
.items = {
{ "Ext Mic", 0x0 },
+ { "Line In", 0x2 },
{ "CD", 0x4 },
+ { "Input Mix", 0xa },
{ "Int Mic", 0xb },
},
},
{
- .num_items = 2,
+ .num_items = 4,
.items = {
{ "Ext Mic", 0x0 },
+ { "Line In", 0x2 },
{ "CD", 0x4 },
+ { "Input Mix", 0xa },
},
}
};
@@ -1639,6 +1652,17 @@
alc_automute_amp(codec);
}
+static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x16;
+ spec->autocfg.speaker_pins[2] = 0x17;
+ alc_automute_amp(codec);
+}
+
static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -4481,6 +4505,12 @@
&dig_nid, 1);
if (err < 0)
continue;
+ if (dig_nid > 0x7f) {
+ printk(KERN_ERR "alc880_auto: invalid dig_nid "
+ "connection 0x%x for NID 0x%x\n", dig_nid,
+ spec->autocfg.dig_out_pins[i]);
+ continue;
+ }
if (!i)
spec->multiout.dig_out_nid = dig_nid;
else {
@@ -6895,9 +6925,6 @@
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- {0x01, AC_VERB_SET_GPIO_MASK, 0x03},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x03},
{ } /* end */
};
@@ -7217,7 +7244,8 @@
},
[ALC882_TARGA] = {
.mixers = { alc882_targa_mixer, alc882_chmode_mixer },
- .init_verbs = { alc882_init_verbs, alc882_targa_verbs},
+ .init_verbs = { alc882_init_verbs, alc880_gpio3_init_verbs,
+ alc882_targa_verbs},
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
.dig_out_nid = ALC882_DIGOUT_NID,
@@ -8189,6 +8217,8 @@
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -9064,7 +9094,7 @@
SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
- ALC888_ACER_ASPIRE_4930G),
+ ALC888_ACER_ASPIRE_6530G),
SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
ALC888_ACER_ASPIRE_6530G),
/* default Acer -- disabled as it causes more problems.
@@ -9212,7 +9242,8 @@
},
[ALC883_TARGA_DIG] = {
.mixers = { alc883_targa_mixer, alc883_chmode_mixer },
- .init_verbs = { alc883_init_verbs, alc883_targa_verbs},
+ .init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+ alc883_targa_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.dig_out_nid = ALC883_DIGOUT_NID,
@@ -9225,7 +9256,8 @@
},
[ALC883_TARGA_2ch_DIG] = {
.mixers = { alc883_targa_2ch_mixer},
- .init_verbs = { alc883_init_verbs, alc883_targa_verbs},
+ .init_verbs = { alc883_init_verbs, alc880_gpio3_init_verbs,
+ alc883_targa_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.adc_nids = alc883_adc_nids_alt,
@@ -9317,7 +9349,7 @@
ARRAY_SIZE(alc888_2_capture_sources),
.input_mux = alc888_acer_aspire_6530_sources,
.unsol_event = alc_automute_amp_unsol_event,
- .init_hook = alc888_acer_aspire_4930g_init_hook,
+ .init_hook = alc888_acer_aspire_6530g_init_hook,
},
[ALC888_ACER_ASPIRE_8930G] = {
.mixers = { alc888_base_mixer,
@@ -10599,6 +10631,18 @@
alc262_lenovo_3000_automute(codec, 1);
}
+static int amp_stereo_mute_update(struct hda_codec *codec, hda_nid_t nid,
+ int dir, int idx, long *valp)
+{
+ int i, change = 0;
+
+ for (i = 0; i < 2; i++, valp++)
+ change |= snd_hda_codec_amp_update(codec, nid, i, dir, idx,
+ HDA_AMP_MUTE,
+ *valp ? 0 : HDA_AMP_MUTE);
+ return change;
+}
+
/* bind hp and internal speaker mute (with plug check) */
static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -10607,13 +10651,8 @@
long *valp = ucontrol->value.integer.value;
int change;
- change = snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp ? 0 : HDA_AMP_MUTE);
- change |= snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp ? 0 : HDA_AMP_MUTE);
-
+ change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
+ change |= amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
if (change)
alc262_fujitsu_automute(codec, 0);
return change;
@@ -10648,10 +10687,7 @@
long *valp = ucontrol->value.integer.value;
int change;
- change = snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp ? 0 : HDA_AMP_MUTE);
-
+ change = amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
if (change)
alc262_lenovo_3000_automute(codec, 0);
return change;
@@ -11822,12 +11858,7 @@
long *valp = ucontrol->value.integer.value;
int change;
- change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp[0] ? 0 : HDA_AMP_MUTE);
- change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
- HDA_AMP_MUTE,
- valp[1] ? 0 : HDA_AMP_MUTE);
+ change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
if (change)
alc268_acer_automute(codec, 0);
return change;
@@ -12437,6 +12468,8 @@
if (err < 0)
return err;
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
return 1;
}
@@ -12848,20 +12881,11 @@
{ }
};
-/* bind volumes of both NID 0x0c and 0x0d */
-static struct hda_bind_ctls alc269_epc_bind_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x03, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
static struct snd_kcontrol_new alc269_eeepc_mixer[] = {
- HDA_CODEC_MUTE("iSpeaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_BIND_VOL("LineOut Playback Volume", &alc269_epc_bind_vol),
- HDA_CODEC_MUTE("LineOut Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT),
{ } /* end */
};
@@ -12874,12 +12898,7 @@
};
/* FSC amilo */
-static struct snd_kcontrol_new alc269_fujitsu_mixer[] = {
- HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
- HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol),
- { } /* end */
-};
+#define alc269_fujitsu_mixer alc269_eeepc_mixer
static struct hda_verb alc269_quanta_fl1_verbs[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -13345,6 +13364,8 @@
if (!spec->cap_mixer && !spec->no_analog)
set_capture_mixer(spec);
+ alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
return 1;
}
@@ -13542,6 +13563,8 @@
set_capture_mixer(spec);
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
+ spec->vmaster_nid = 0x02;
+
codec->patch_ops = alc_patch_ops;
if (board_config == ALC269_AUTO)
spec->init_hook = alc269_auto_init;
@@ -15136,7 +15159,7 @@
SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
/*SND_PCI_QUIRK(0x1179, 0xff00, "DALLAS", ALC861VD_DALLAS),*/ /*lenovo*/
- SND_PCI_QUIRK(0x1179, 0xff01, "DALLAS", ALC861VD_DALLAS),
+ SND_PCI_QUIRK(0x1179, 0xff01, "Toshiba A135", ALC861VD_LENOVO),
SND_PCI_QUIRK(0x1179, 0xff03, "Toshiba P205", ALC861VD_LENOVO),
SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_DALLAS),
SND_PCI_QUIRK(0x1565, 0x820d, "Biostar NF61S SE", ALC861VD_6ST_DIG),
@@ -15556,9 +15579,12 @@
spec->stream_digital_playback = &alc861vd_pcm_digital_playback;
spec->stream_digital_capture = &alc861vd_pcm_digital_capture;
- spec->adc_nids = alc861vd_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
- spec->capsrc_nids = alc861vd_capsrc_nids;
+ if (!spec->adc_nids) {
+ spec->adc_nids = alc861vd_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
+ }
+ if (!spec->capsrc_nids)
+ spec->capsrc_nids = alc861vd_capsrc_nids;
set_capture_mixer(spec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
@@ -17475,9 +17501,12 @@
spec->stream_digital_playback = &alc662_pcm_digital_playback;
spec->stream_digital_capture = &alc662_pcm_digital_capture;
- spec->adc_nids = alc662_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
- spec->capsrc_nids = alc662_capsrc_nids;
+ if (!spec->adc_nids) {
+ spec->adc_nids = alc662_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
+ }
+ if (!spec->capsrc_nids)
+ spec->capsrc_nids = alc662_capsrc_nids;
if (!spec->cap_mixer)
set_capture_mixer(spec);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 14f3c3e..456ef6a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1590,8 +1590,6 @@
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_REF),
- SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
- "SigmaTel",STAC_9205_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
"DFI LanParty", STAC_REF),
/* Dell laptops have BIOS problem */
@@ -1811,6 +1809,8 @@
"Dell Studio 1537", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
"Dell Studio 17", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
+ "Dell Studio 1555", STAC_DELL_M6_DMIC),
{} /* terminator */
};
@@ -2266,7 +2266,7 @@
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS),
- SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS),
@@ -2344,6 +2344,8 @@
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_9205_REF),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xfb30,
+ "SigmaTel", STAC_9205_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
"DFI LanParty", STAC_9205_REF),
/* Dell */
@@ -2378,6 +2380,7 @@
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228,
"Dell Vostro 1500", STAC_9205_DELL_M42),
/* Gateway */
+ SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD),
SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD),
{} /* terminator */
};
@@ -4065,7 +4068,7 @@
jack->nid = nid;
jack->type = type;
- sprintf(name, "%s at %s %s Jack",
+ snprintf(name, sizeof(name), "%s at %s %s Jack",
snd_hda_get_jack_type(def_conf),
snd_hda_get_jack_connectivity(def_conf),
snd_hda_get_jack_location(def_conf));
@@ -5642,6 +5645,13 @@
/* GPIO2 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
spec->gpio_data = 0x04;
+ switch (codec->subsystem_id) {
+ case 0x1028022f:
+ /* correct EAPD to be GPIO0 */
+ spec->eapd_mask = spec->gpio_mask = 0x01;
+ spec->gpio_dir = spec->gpio_data = 0x01;
+ break;
+ };
spec->dmic_nids = stac927x_dmic_nids;
spec->num_dmics = STAC927X_NUM_DMICS;
@@ -5854,6 +5864,8 @@
};
static struct snd_pci_quirk stac9872_cfg_tbl[] = {
+ SND_PCI_QUIRK_MASK(0x104d, 0xfff0, 0x81e0,
+ "Sony VAIO F/S", STAC_9872_VAIO),
{} /* terminator */
};
@@ -5866,6 +5878,8 @@
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
+ spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
+ spec->pin_nids = stac9872_pin_nids;
spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS,
stac9872_models,
@@ -5877,8 +5891,6 @@
stac92xx_set_config_regs(codec,
stac9872_brd_tbl[spec->board_config]);
- spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
- spec->pin_nids = stac9872_pin_nids;
spec->multiout.dac_nids = spec->dac_nids;
spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids);
spec->adc_nids = stac9872_adc_nids;
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 8e004fb..9008b4b 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -210,7 +210,9 @@
/* capture */
unsigned int num_adc_nids;
hda_nid_t *adc_nids;
+ hda_nid_t mux_nids[3];
hda_nid_t dig_in_nid;
+ hda_nid_t dig_in_pin;
/* capture source */
const struct hda_input_mux *input_mux;
@@ -319,6 +321,9 @@
pin_type);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_UNMUTE);
+ if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 0x02);
}
@@ -387,27 +392,12 @@
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct via_spec *spec = codec->spec;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- unsigned int vendor_id = codec->vendor_id;
- /* AIW0 lydia 060801 add for correct sw0 input select */
- if (IS_VT1708_VENDORID(vendor_id) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x18, &spec->cur_mux[adc_idx]);
- else if ((IS_VT1709_10CH_VENDORID(vendor_id) ||
- IS_VT1709_6CH_VENDORID(vendor_id)) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x19, &spec->cur_mux[adc_idx]);
- else if ((IS_VT1708B_8CH_VENDORID(vendor_id) ||
- IS_VT1708B_4CH_VENDORID(vendor_id)) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x17, &spec->cur_mux[adc_idx]);
- else if (IS_VT1702_VENDORID(vendor_id) && (adc_idx == 0))
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- 0x13, &spec->cur_mux[adc_idx]);
- else
- return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
- spec->adc_nids[adc_idx],
- &spec->cur_mux[adc_idx]);
+ if (!spec->mux_nids[adc_idx])
+ return -EINVAL;
+ return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
+ spec->mux_nids[adc_idx],
+ &spec->cur_mux[adc_idx]);
}
static int via_independent_hp_info(struct snd_kcontrol *kcontrol,
@@ -998,25 +988,11 @@
/* Lydia Add for EAPD enable */
if (!spec->dig_in_nid) { /* No Digital In connection */
- if (IS_VT1708_VENDORID(codec->vendor_id)) {
- snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
+ if (spec->dig_in_pin) {
+ snd_hda_codec_write(codec, spec->dig_in_pin, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
PIN_OUT);
- snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 0x02);
- } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) ||
- IS_VT1709_6CH_VENDORID(codec->vendor_id)) {
- snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- PIN_OUT);
- snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
- AC_VERB_SET_EAPD_BTLENABLE, 0x02);
- } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) ||
- IS_VT1708B_4CH_VENDORID(codec->vendor_id)) {
- snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL,
- PIN_OUT);
- snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
+ snd_hda_codec_write(codec, spec->dig_in_pin, 0,
AC_VERB_SET_EAPD_BTLENABLE, 0x02);
}
} else /* enable SPDIF-input pin */
@@ -1326,6 +1302,7 @@
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708_DIGOUT_NID;
+ spec->dig_in_pin = VT1708_DIGIN_PIN;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708_DIGIN_NID;
@@ -1352,6 +1329,34 @@
return 0;
}
+static int get_mux_nids(struct hda_codec *codec)
+{
+ struct via_spec *spec = codec->spec;
+ hda_nid_t nid, conn[8];
+ unsigned int type;
+ int i, n;
+
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ nid = spec->adc_nids[i];
+ while (nid) {
+ type = (get_wcaps(codec, nid) & AC_WCAP_TYPE)
+ >> AC_WCAP_TYPE_SHIFT;
+ if (type == AC_WID_PIN)
+ break;
+ n = snd_hda_get_connections(codec, nid, conn,
+ ARRAY_SIZE(conn));
+ if (n <= 0)
+ break;
+ if (n > 1) {
+ spec->mux_nids[i] = nid;
+ break;
+ }
+ nid = conn[0];
+ }
+ }
+ return 0;
+}
+
static int patch_vt1708(struct hda_codec *codec)
{
struct via_spec *spec;
@@ -1799,6 +1804,7 @@
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1709_DIGOUT_NID;
+ spec->dig_in_pin = VT1709_DIGIN_PIN;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1709_DIGIN_NID;
@@ -1859,6 +1865,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1709_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1709_capture_mixer;
spec->num_mixers++;
}
@@ -1952,6 +1959,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1709_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1709_capture_mixer;
spec->num_mixers++;
}
@@ -2344,6 +2352,7 @@
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708B_DIGOUT_NID;
+ spec->dig_in_pin = VT1708B_DIGIN_PIN;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708B_DIGIN_NID;
@@ -2404,6 +2413,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708B_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708B_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708B_capture_mixer;
spec->num_mixers++;
}
@@ -2455,6 +2465,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708B_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708B_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708B_capture_mixer;
spec->num_mixers++;
}
@@ -2889,6 +2900,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708S_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708S_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708S_capture_mixer;
spec->num_mixers++;
}
@@ -3206,6 +3218,7 @@
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1702_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1702_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1702_capture_mixer;
spec->num_mixers++;
}
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0d0cdbd..cecf1ff 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -107,7 +107,7 @@
static const struct pci_device_id snd_ice1712_ids[] = {
- { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ICE1712 */
+ { PCI_VDEVICE(ICE, PCI_DEVICE_ID_ICE_1712), 0 }, /* ICE1712 */
{ 0, }
};
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 36ade77..cc84a83 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -93,7 +93,7 @@
/* Both VT1720 and VT1724 have the same PCI IDs */
static const struct pci_device_id snd_vt1724_ids[] = {
- { PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VDEVICE(ICE, PCI_DEVICE_ID_VT1724), 0 },
{ 0, }
};
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 8aa5687..171ada5 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -421,29 +421,29 @@
};
static struct pci_device_id snd_intel8x0_ids[] = {
- { 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
- { 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
- { 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
- { 0x8086, 0x2485, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH3 */
- { 0x8086, 0x24c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH4 */
- { 0x8086, 0x24d5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH5 */
- { 0x8086, 0x25a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB */
- { 0x8086, 0x266e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH6 */
- { 0x8086, 0x27de, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH7 */
- { 0x8086, 0x2698, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB2 */
- { 0x8086, 0x7195, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 440MX */
- { 0x1039, 0x7012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS }, /* SI7012 */
- { 0x10de, 0x01b1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */
- { 0x10de, 0x003a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP04 */
- { 0x10de, 0x006a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */
- { 0x10de, 0x0059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK804 */
- { 0x10de, 0x008a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8 */
- { 0x10de, 0x00da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
- { 0x10de, 0x00ea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* CK8S */
- { 0x10de, 0x026b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* MCP51 */
- { 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */
- { 0x1022, 0x7445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */
- { 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */
+ { PCI_VDEVICE(INTEL, 0x2415), DEVICE_INTEL }, /* 82801AA */
+ { PCI_VDEVICE(INTEL, 0x2425), DEVICE_INTEL }, /* 82901AB */
+ { PCI_VDEVICE(INTEL, 0x2445), DEVICE_INTEL }, /* 82801BA */
+ { PCI_VDEVICE(INTEL, 0x2485), DEVICE_INTEL }, /* ICH3 */
+ { PCI_VDEVICE(INTEL, 0x24c5), DEVICE_INTEL_ICH4 }, /* ICH4 */
+ { PCI_VDEVICE(INTEL, 0x24d5), DEVICE_INTEL_ICH4 }, /* ICH5 */
+ { PCI_VDEVICE(INTEL, 0x25a6), DEVICE_INTEL_ICH4 }, /* ESB */
+ { PCI_VDEVICE(INTEL, 0x266e), DEVICE_INTEL_ICH4 }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x27de), DEVICE_INTEL_ICH4 }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x2698), DEVICE_INTEL_ICH4 }, /* ESB2 */
+ { PCI_VDEVICE(INTEL, 0x7195), DEVICE_INTEL }, /* 440MX */
+ { PCI_VDEVICE(SI, 0x7012), DEVICE_SIS }, /* SI7012 */
+ { PCI_VDEVICE(NVIDIA, 0x01b1), DEVICE_NFORCE }, /* NFORCE */
+ { PCI_VDEVICE(NVIDIA, 0x003a), DEVICE_NFORCE }, /* MCP04 */
+ { PCI_VDEVICE(NVIDIA, 0x006a), DEVICE_NFORCE }, /* NFORCE2 */
+ { PCI_VDEVICE(NVIDIA, 0x0059), DEVICE_NFORCE }, /* CK804 */
+ { PCI_VDEVICE(NVIDIA, 0x008a), DEVICE_NFORCE }, /* CK8 */
+ { PCI_VDEVICE(NVIDIA, 0x00da), DEVICE_NFORCE }, /* NFORCE3 */
+ { PCI_VDEVICE(NVIDIA, 0x00ea), DEVICE_NFORCE }, /* CK8S */
+ { PCI_VDEVICE(NVIDIA, 0x026b), DEVICE_NFORCE }, /* MCP51 */
+ { PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL }, /* AMD8111 */
+ { PCI_VDEVICE(AMD, 0x7445), DEVICE_INTEL }, /* AMD768 */
+ { PCI_VDEVICE(AL, 0x5455), DEVICE_ALI }, /* Ali5455 */
{ 0, }
};
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 6ec0fc5..9e7d12e 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -220,24 +220,24 @@
};
static struct pci_device_id snd_intel8x0m_ids[] = {
- { 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801AA */
- { 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82901AB */
- { 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 82801BA */
- { 0x8086, 0x2486, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH3 */
- { 0x8086, 0x24c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH4 */
- { 0x8086, 0x24d6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH5 */
- { 0x8086, 0x266d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH6 */
- { 0x8086, 0x27dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH7 */
- { 0x8086, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* 440MX */
- { 0x1022, 0x7446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD768 */
- { 0x1039, 0x7013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS }, /* SI7013 */
- { 0x10de, 0x01c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */
- { 0x10de, 0x0069, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */
- { 0x10de, 0x0089, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2s */
- { 0x10de, 0x00d9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
+ { PCI_VDEVICE(INTEL, 0x2416), DEVICE_INTEL }, /* 82801AA */
+ { PCI_VDEVICE(INTEL, 0x2426), DEVICE_INTEL }, /* 82901AB */
+ { PCI_VDEVICE(INTEL, 0x2446), DEVICE_INTEL }, /* 82801BA */
+ { PCI_VDEVICE(INTEL, 0x2486), DEVICE_INTEL }, /* ICH3 */
+ { PCI_VDEVICE(INTEL, 0x24c6), DEVICE_INTEL }, /* ICH4 */
+ { PCI_VDEVICE(INTEL, 0x24d6), DEVICE_INTEL }, /* ICH5 */
+ { PCI_VDEVICE(INTEL, 0x266d), DEVICE_INTEL }, /* ICH6 */
+ { PCI_VDEVICE(INTEL, 0x27dd), DEVICE_INTEL }, /* ICH7 */
+ { PCI_VDEVICE(INTEL, 0x7196), DEVICE_INTEL }, /* 440MX */
+ { PCI_VDEVICE(AMD, 0x7446), DEVICE_INTEL }, /* AMD768 */
+ { PCI_VDEVICE(SI, 0x7013), DEVICE_SIS }, /* SI7013 */
+ { PCI_VDEVICE(NVIDIA, 0x01c1), DEVICE_NFORCE }, /* NFORCE */
+ { PCI_VDEVICE(NVIDIA, 0x0069), DEVICE_NFORCE }, /* NFORCE2 */
+ { PCI_VDEVICE(NVIDIA, 0x0089), DEVICE_NFORCE }, /* NFORCE2s */
+ { PCI_VDEVICE(NVIDIA, 0x00d9), DEVICE_NFORCE }, /* NFORCE3 */
#if 0
- { 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* AMD8111 */
- { 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI }, /* Ali5455 */
+ { PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL }, /* AMD8111 */
+ { PCI_VDEVICE(AL, 0x5455), DEVICE_ALI }, /* Ali5455 */
#endif
{ 0, }
};
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
index 18da2ef..11b8c65 100644
--- a/sound/pci/lx6464es/lx6464es.c
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -654,13 +654,12 @@
int i;
u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
- u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+ /* configure 64 io channels */
+ u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) |
(64 << IOCR_INPUTS_OFFSET) |
+ (64 << IOCR_OUTPUTS_OFFSET) |
(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
- u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
- | (default_conf_es & CONFES_WRITE_PART_MASK);
-
snd_printdd("->lx_init_ethersound\n");
chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 82bc5b9e..a83d196 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -61,7 +61,7 @@
*/
static struct pci_device_id snd_mixart_ids[] = {
- { 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
+ { PCI_VDEVICE(MOTOROLA, 0x0003), 0, }, /* MC8240 */
{ 0, }
};
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 522a040..97a0731 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -263,9 +263,9 @@
* PCI ids
*/
static struct pci_device_id snd_nm256_ids[] = {
- {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0},
+ {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0},
+ {PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0},
{0,},
};
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 304da16..5401c54 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -575,8 +575,10 @@
static int ac97_volume_info(struct snd_kcontrol *ctl,
struct snd_ctl_elem_info *info)
{
+ int stereo = (ctl->private_value >> 16) & 1;
+
info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- info->count = 2;
+ info->count = stereo ? 2 : 1;
info->value.integer.min = 0;
info->value.integer.max = 0x1f;
return 0;
@@ -587,6 +589,7 @@
{
struct oxygen *chip = ctl->private_data;
unsigned int codec = (ctl->private_value >> 24) & 1;
+ int stereo = (ctl->private_value >> 16) & 1;
unsigned int index = ctl->private_value & 0xff;
u16 reg;
@@ -594,7 +597,8 @@
reg = oxygen_read_ac97(chip, codec, index);
mutex_unlock(&chip->mutex);
value->value.integer.value[0] = 31 - (reg & 0x1f);
- value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
+ if (stereo)
+ value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
return 0;
}
@@ -603,6 +607,7 @@
{
struct oxygen *chip = ctl->private_data;
unsigned int codec = (ctl->private_value >> 24) & 1;
+ int stereo = (ctl->private_value >> 16) & 1;
unsigned int index = ctl->private_value & 0xff;
u16 oldreg, newreg;
int change;
@@ -612,8 +617,11 @@
newreg = oldreg;
newreg = (newreg & ~0x1f) |
(31 - (value->value.integer.value[0] & 0x1f));
- newreg = (newreg & ~0x1f00) |
- ((31 - (value->value.integer.value[0] & 0x1f)) << 8);
+ if (stereo)
+ newreg = (newreg & ~0x1f00) |
+ ((31 - (value->value.integer.value[1] & 0x1f)) << 8);
+ else
+ newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8);
change = newreg != oldreg;
if (change)
oxygen_write_ac97(chip, codec, index, newreg);
@@ -673,7 +681,7 @@
.private_value = ((codec) << 24) | ((invert) << 16) | \
((bitnr) << 8) | (index), \
}
-#define AC97_VOLUME(xname, codec, index) { \
+#define AC97_VOLUME(xname, codec, index, stereo) { \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
@@ -682,7 +690,7 @@
.get = ac97_volume_get, \
.put = ac97_volume_put, \
.tlv = { .p = ac97_db_scale, }, \
- .private_value = ((codec) << 24) | (index), \
+ .private_value = ((codec) << 24) | ((stereo) << 16) | (index), \
}
static DECLARE_TLV_DB_SCALE(monitor_db_scale, -1000, 1000, 0);
@@ -882,18 +890,18 @@
};
static const struct snd_kcontrol_new ac97_controls[] = {
- AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC),
+ AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC, 0),
AC97_SWITCH("Mic Capture Switch", 0, AC97_MIC, 15, 1),
AC97_SWITCH("Mic Boost (+20dB)", 0, AC97_MIC, 6, 0),
AC97_SWITCH("Line Capture Switch", 0, AC97_LINE, 15, 1),
- AC97_VOLUME("CD Capture Volume", 0, AC97_CD),
+ AC97_VOLUME("CD Capture Volume", 0, AC97_CD, 1),
AC97_SWITCH("CD Capture Switch", 0, AC97_CD, 15, 1),
- AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX),
+ AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX, 1),
AC97_SWITCH("Aux Capture Switch", 0, AC97_AUX, 15, 1),
};
static const struct snd_kcontrol_new ac97_fp_controls[] = {
- AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE),
+ AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE, 1),
AC97_SWITCH("Front Panel Playback Switch", 1, AC97_HEADPHONE, 15, 1),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index bf971f7..6ebcb6b 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -635,6 +635,8 @@
static void xonar_d1_resume(struct oxygen *chip)
{
+ oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
+ msleep(1);
cs43xx_init(chip);
xonar_enable_output(chip);
}
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 235a71e..b5ca02e 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2197,9 +2197,12 @@
if (err < 0)
return err;
#if defined(SUPPORT_JOYSTICK)
- pci_register_driver(&joystick_driver);
+ err = pci_register_driver(&joystick_driver);
+ /* On failure unregister formerly registered audio driver */
+ if (err < 0)
+ pci_unregister_driver(&driver);
#endif
- return 0;
+ return err;
}
static void __exit alsa_card_riptide_exit(void)
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index d7b966e..f977dba 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -227,12 +227,9 @@
};
static struct pci_device_id snd_rme32_ids[] = {
- {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
- {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
- {PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+ {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,},
+ {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,},
+ {PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,},
{0,}
};
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 55fb1c1..2ba5c0f 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -232,14 +232,10 @@
};
static struct pci_device_id snd_rme96_ids[] = {
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
- { PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96), 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8), 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO), 0, },
+ { PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST), 0, },
{ 0, }
};
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 7dc60ad..1f6406c 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -243,7 +243,7 @@
};
static struct pci_device_id snd_sonic_ids[] = {
- { 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+ { PCI_VDEVICE(S3, 0xca00), 0, },
{ 0, }
};
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 949fcaf..acfa476 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -402,9 +402,9 @@
static struct pci_device_id snd_via82xx_ids[] = {
/* 0x1106, 0x3058 */
- { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, }, /* 686A */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686_5), TYPE_CARD_VIA686, }, /* 686A */
/* 0x1106, 0x3059 */
- { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, }, /* VT8233 */
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_5), TYPE_CARD_VIA8233, }, /* VT8233 */
{ 0, }
};
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 0d54e35..47eb615 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -261,7 +261,7 @@
};
static struct pci_device_id snd_via82xx_modem_ids[] = {
- { 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
+ { PCI_VDEVICE(VIA, 0x3068), TYPE_CARD_VIA82XX_MODEM, },
{ 0, }
};
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 4af6666..e6b18b9 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -67,12 +67,12 @@
MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
static struct pci_device_id snd_ymfpci_ids[] = {
- { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724 */
- { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF724F */
- { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740 */
- { 0x1073, 0x000c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF740C */
- { 0x1073, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF744 */
- { 0x1073, 0x0012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* YMF754 */
+ { PCI_VDEVICE(YAMAHA, 0x0004), 0, }, /* YMF724 */
+ { PCI_VDEVICE(YAMAHA, 0x000d), 0, }, /* YMF724F */
+ { PCI_VDEVICE(YAMAHA, 0x000a), 0, }, /* YMF740 */
+ { PCI_VDEVICE(YAMAHA, 0x000c), 0, }, /* YMF740C */
+ { PCI_VDEVICE(YAMAHA, 0x0010), 0, }, /* YMF744 */
+ { PCI_VDEVICE(YAMAHA, 0x0012), 0, }, /* YMF754 */
{ 0, }
};
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index ab099f4..cb0d1bf 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -767,6 +767,7 @@
int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
u16 pll_d = 1;
+ u8 reg;
/* select data word length */
data =
@@ -801,8 +802,16 @@
pll_q &= 0xf;
aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
- } else
+ /* disable PLL if it is bypassed */
+ reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+ aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
+
+ } else {
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
+ /* enable PLL when it is used */
+ reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+ aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
+ }
/* Route Left DAC to left channel input and
* right DAC to right channel input */
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index d28eeac..49c4b28 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -79,7 +79,7 @@
0x0097, 0x0097, 0x0000, 0x0004,
0x0000, 0x0083, 0x0024, 0x01ba,
0x0000, 0x0083, 0x0024, 0x01ba,
- 0x0000, 0x0000
+ 0x0000, 0x0000, 0x0000
};
/* codec private data */
@@ -1660,11 +1660,11 @@
codec->set_bias_level = wm8753_set_bias_level;
codec->dai = wm8753_dai;
codec->num_dai = 2;
- codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache);
+ codec->reg_cache_size = ARRAY_SIZE(wm8753->reg_cache) + 1;
codec->reg_cache = &wm8753->reg_cache;
codec->private_data = wm8753;
- memcpy(codec->reg_cache, wm8753_reg, sizeof(codec->reg_cache));
+ memcpy(codec->reg_cache, wm8753_reg, sizeof(wm8753->reg_cache));
INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
ret = wm8753_reset(codec);
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index c05f718..8c0fdf8 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -1037,14 +1037,14 @@
codec->control_data = spi;
codec->dev = &spi->dev;
- spi->dev.driver_data = wm8988;
+ dev_set_drvdata(&spi->dev, wm8988);
return wm8988_register(wm8988);
}
static int __devexit wm8988_spi_remove(struct spi_device *spi)
{
- struct wm8988_priv *wm8988 = spi->dev.driver_data;
+ struct wm8988_priv *wm8988 = dev_get_drvdata(&spi->dev);
wm8988_unregister(wm8988);
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 5dbebf8..8cb65cc 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -33,7 +33,7 @@
config SND_SOC_MPC5200_AC97
tristate "Freescale MPC5200 PSC in AC97 mode driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
- select AC97_BUS
+ select SND_SOC_AC97_BUS
select SND_MPC52xx_DMA
select PPC_BESTCOMM_GEN_BD
help
@@ -41,7 +41,7 @@
config SND_MPC52xx_SOC_PCM030
tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712"
- depends on PPC_MPC5200_SIMPLE && BROKEN
+ depends on PPC_MPC5200_SIMPLE
select SND_SOC_MPC5200_AC97
select SND_SOC_WM9712
help
@@ -50,7 +50,7 @@
config SND_MPC52xx_SOC_EFIKA
tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
- depends on PPC_EFIKA && BROKEN
+ depends on PPC_EFIKA
select SND_SOC_MPC5200_AC97
select SND_SOC_STAC9766
help
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 85b0e75..3326e2a 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -30,6 +30,8 @@
#include "mpc5200_psc_ac97.h"
#include "../codecs/stac9766.h"
+#define DRV_NAME "efika-audio-fabric"
+
static struct snd_soc_device device;
static struct snd_soc_card card;
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index efec33a..f0a2d40 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -456,6 +456,7 @@
return -ENODEV;
spin_lock_init(&psc_dma->lock);
+ mutex_init(&psc_dma->mutex);
psc_dma->id = be32_to_cpu(*prop);
psc_dma->irq = irq;
psc_dma->psc_regs = regs;
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 2000803..8d396bb 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -55,6 +55,7 @@
unsigned int irq;
struct device *dev;
spinlock_t lock;
+ struct mutex mutex;
u32 sicr;
uint sysclk;
int imr;
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index 794a247..7eb5499 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -34,13 +34,20 @@
int status;
unsigned int val;
+ mutex_lock(&psc_dma->mutex);
+
/* Wait for command send status zero = ready */
status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_CMDSEND), 100, 0);
if (status == 0) {
pr_err("timeout on ac97 bus (rdy)\n");
+ mutex_unlock(&psc_dma->mutex);
return -ENODEV;
}
+
+ /* Force clear the data valid bit */
+ in_be32(&psc_dma->psc_regs->ac97_data);
+
/* Send the read */
out_be32(&psc_dma->psc_regs->ac97_cmd, (1<<31) | ((reg & 0x7f) << 24));
@@ -50,16 +57,19 @@
if (status == 0) {
pr_err("timeout on ac97 read (val) %x\n",
in_be16(&psc_dma->psc_regs->sr_csr.status));
+ mutex_unlock(&psc_dma->mutex);
return -ENODEV;
}
/* Get the data */
val = in_be32(&psc_dma->psc_regs->ac97_data);
if (((val >> 24) & 0x7f) != reg) {
pr_err("reg echo error on ac97 read\n");
+ mutex_unlock(&psc_dma->mutex);
return -ENODEV;
}
val = (val >> 8) & 0xffff;
+ mutex_unlock(&psc_dma->mutex);
return (unsigned short) val;
}
@@ -68,16 +78,21 @@
{
int status;
+ mutex_lock(&psc_dma->mutex);
+
/* Wait for command status zero = ready */
status = spin_event_timeout(!(in_be16(&psc_dma->psc_regs->sr_csr.status) &
MPC52xx_PSC_SR_CMDSEND), 100, 0);
if (status == 0) {
pr_err("timeout on ac97 bus (write)\n");
- return;
+ goto out;
}
/* Write data */
out_be32(&psc_dma->psc_regs->ac97_cmd,
((reg & 0x7f) << 24) | (val << 8));
+
+ out:
+ mutex_unlock(&psc_dma->mutex);
}
static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index 8766f7a..b928ef7 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -30,6 +30,8 @@
#include "mpc5200_psc_ac97.h"
#include "../codecs/wm9712.h"
+#define DRV_NAME "pcm030-audio-fabric"
+
static struct snd_soc_device device;
static struct snd_soc_card card;
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 6454e15..84a1950 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -216,12 +216,15 @@
dma_addr_t ptr;
snd_pcm_uframes_t offset;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ptr = omap_get_dma_src_pos(prtd->dma_ch);
- else
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
ptr = omap_get_dma_dst_pos(prtd->dma_ch);
+ offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+ } else if (!(cpu_is_omap1510())) {
+ ptr = omap_get_dma_src_pos(prtd->dma_ch);
+ offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+ } else
+ offset = prtd->period_index * runtime->period_size;
- offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
if (offset >= runtime->buffer_size)
offset = 0;
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 4743e26..6b8f655 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -167,6 +167,7 @@
BUG_ON(IS_ERR(clk_i2s));
clk_enable(clk_i2s);
+ dai->private_data = dai;
pxa_i2s_wait();
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -255,7 +256,10 @@
if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
SACR0 &= ~SACR0_ENB;
pxa_i2s_wait();
- clk_disable(clk_i2s);
+ if (dai->private_data != NULL) {
+ clk_disable(clk_i2s);
+ dai->private_data = NULL;
+ }
}
}
@@ -336,6 +340,7 @@
return PTR_ERR(clk_i2s);
pxa_i2s_dai.dev = &dev->dev;
+ pxa_i2s_dai.private_data = NULL;
ret = snd_soc_register_dai(&pxa_i2s_dai);
if (ret != 0)
clk_put(clk_i2s);
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 12522e6..a41f8b1 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
#include <sound/core.h>
#ifdef CONFIG_SOUND_OSS_CORE
@@ -29,6 +31,8 @@
static char *sound_nodename(struct device *dev)
{
+ if (MAJOR(dev->devt) == SOUND_MAJOR)
+ return NULL;
return kasprintf(GFP_KERNEL, "snd/%s", dev_name(dev));
}
@@ -104,7 +108,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sound.h>
-#include <linux/major.h>
#include <linux/kmod.h>
#define SOUND_STEP 16
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 523aec1..73525c0 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -48,6 +48,7 @@
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
+ * Native Instruments Audio 2 DJ
* Native Instruments Audio 4 DJ
* Native Instruments Audio 8 DJ
* Native Instruments Guitar Rig Session I/O
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 8f9b60c..121af06 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -646,6 +646,7 @@
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
dev->samplerates |= SNDRV_PCM_RATE_192000;
/* fall thru */
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
dev->samplerates |= SNDRV_PCM_RATE_88200;
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index 0e5db71..83e6c13 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,13 +35,14 @@
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.17");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
"{Native Instruments, Kore Controller},"
"{Native Instruments, Kore Controller 2},"
"{Native Instruments, Audio Kontrol 1},"
+ "{Native Instruments, Audio 2 DJ},"
"{Native Instruments, Audio 4 DJ},"
"{Native Instruments, Audio 8 DJ},"
"{Native Instruments, Session I/O},"
@@ -121,6 +122,11 @@
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AUDIO4DJ
},
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AUDIO2DJ
+ },
{ /* terminator */ }
};
@@ -349,7 +355,9 @@
log("Unable to set up control system (ret=%d)\n", ret);
}
-static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
+static int create_card(struct usb_device *usb_dev,
+ struct usb_interface *intf,
+ struct snd_card **cardp)
{
int devnum;
int err;
@@ -374,7 +382,7 @@
dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct));
spin_lock_init(&dev->spinlock);
- snd_card_set_dev(card, &usb_dev->dev);
+ snd_card_set_dev(card, &intf->dev);
*cardp = card;
return 0;
@@ -461,7 +469,7 @@
struct snd_card *card;
struct usb_device *device = interface_to_usbdev(intf);
- ret = create_card(device, &card);
+ ret = create_card(device, intf, &card);
if (ret < 0)
return ret;
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index ece7351..44e3edf 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -10,6 +10,7 @@
#define USB_PID_KORECONTROLLER 0x4711
#define USB_PID_KORECONTROLLER2 0x4712
#define USB_PID_AK1 0x0815
+#define USB_PID_AUDIO2DJ 0x041c
#define USB_PID_AUDIO4DJ 0x0839
#define USB_PID_AUDIO8DJ 0x1978
#define USB_PID_SESSIONIO 0x1915
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index c7b9023..44b9cdc 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2661,7 +2661,7 @@
struct usb_interface_descriptor *altsd;
int i, altno, err, stream;
int format;
- struct audioformat *fp;
+ struct audioformat *fp = NULL;
unsigned char *fmt, *csep;
int num;
@@ -2734,6 +2734,18 @@
continue;
}
+ /*
+ * Blue Microphones workaround: The last altsetting is identical
+ * with the previous one, except for a larger packet size, but
+ * is actually a mislabeled two-channel setting; ignore it.
+ */
+ if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 &&
+ fp && fp->altsetting == 1 && fp->channels == 1 &&
+ fp->format == SNDRV_PCM_FORMAT_S16_LE &&
+ le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
+ fp->maxpacksize * 2)
+ continue;
+
csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
/* Creamware Noah has this descriptor after the 2nd endpoint */
if (!csep && altsd->bNumEndpoints >= 2)
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index 4bd3a7a..ec9cdf9 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -990,20 +990,35 @@
break;
}
- /* quirk for UDA1321/N101 */
- /* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */
- /* is not very clear from datasheets */
- /* I hope that the min value is -15360 for newer firmware --jk */
+ /* volume control quirks */
switch (state->chip->usb_id) {
case USB_ID(0x0471, 0x0101):
case USB_ID(0x0471, 0x0104):
case USB_ID(0x0471, 0x0105):
case USB_ID(0x0672, 0x1041):
+ /* quirk for UDA1321/N101.
+ * note that detection between firmware 2.1.1.7 (N101)
+ * and later 2.1.1.21 is not very clear from datasheets.
+ * I hope that the min value is -15360 for newer firmware --jk
+ */
if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
cval->min == -15616) {
- snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n");
+ snd_printk(KERN_INFO
+ "set volume quirk for UDA1321/N101 chip\n");
cval->max = -256;
}
+ break;
+
+ case USB_ID(0x046d, 0x09a4):
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set volume quirk for QuickCam E3500\n");
+ cval->min = 6080;
+ cval->max = 8768;
+ cval->res = 192;
+ }
+ break;
+
}
snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index a5aae9d..fd44946 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -514,7 +514,6 @@
US122L(card)->chip.dev->bus->busnum,
US122L(card)->chip.dev->devnum
);
- snd_card_set_dev(card, &device->dev);
*cardp = card;
return 0;
}
@@ -531,6 +530,7 @@
if (err < 0)
return err;
+ snd_card_set_dev(card, &intf->dev);
if (!us122l_create_card(card)) {
snd_card_free(card);
return -EINVAL;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 5ce0da2..cb4bb83 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -364,7 +364,6 @@
0,//us428(card)->usbmidi.ifnum,
usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum
);
- snd_card_set_dev(card, &device->dev);
*cardp = card;
return 0;
}
@@ -388,6 +387,7 @@
err = usX2Y_create_card(device, &card);
if (err < 0)
return err;
+ snd_card_set_dev(card, &intf->dev);
if ((err = usX2Y_hwdep_new(card, device)) < 0 ||
(err = snd_card_register(card)) < 0) {
snd_card_free(card);
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index dd1ab61..9efd27f 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -296,9 +296,10 @@
static void usX2Y_error_sequence(struct usX2Ydev *usX2Y,
struct snd_usX2Y_substream *subs, struct urb *urb)
{
- snd_printk(KERN_ERR "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
- KERN_ERR "Most propably some urb of usb-frame %i is still missing.\n"
- KERN_ERR "Cause could be too long delays in usb-hcd interrupt handling.\n",
+ snd_printk(KERN_ERR
+"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
+"Most propably some urb of usb-frame %i is still missing.\n"
+"Cause could be too long delays in usb-hcd interrupt handling.\n",
usb_get_current_frame_number(usX2Y->chip.dev),
subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame);
diff --git a/tools/perf/CREDITS b/tools/perf/CREDITS
new file mode 100644
index 0000000..c2ddcb3
--- /dev/null
+++ b/tools/perf/CREDITS
@@ -0,0 +1,30 @@
+Most of the infrastructure that 'perf' uses here has been reused
+from the Git project, as of version:
+
+ 66996ec: Sync with 1.6.2.4
+
+Here is an (incomplete!) list of main contributors to those files
+in util/* and elsewhere:
+
+ Alex Riesen
+ Christian Couder
+ Dmitry Potapov
+ Jeff King
+ Johannes Schindelin
+ Johannes Sixt
+ Junio C Hamano
+ Linus Torvalds
+ Matthias Kestenholz
+ Michal Ostrowski
+ Miklos Vajna
+ Petr Baudis
+ Pierre Habouzit
+ René Scharfe
+ Samuel Tardieu
+ Shawn O. Pearce
+ Steffen Prohaska
+ Steve Haslam
+
+Thanks guys!
+
+The full history of the files can be found in the upstream Git commits.
diff --git a/tools/perf/Documentation/perf-examples.txt b/tools/perf/Documentation/perf-examples.txt
new file mode 100644
index 0000000..8eb6c48
--- /dev/null
+++ b/tools/perf/Documentation/perf-examples.txt
@@ -0,0 +1,225 @@
+
+ ------------------------------
+ ****** perf by examples ******
+ ------------------------------
+
+[ From an e-mail by Ingo Molnar, http://lkml.org/lkml/2009/8/4/346 ]
+
+
+First, discovery/enumeration of available counters can be done via
+'perf list':
+
+titan:~> perf list
+ [...]
+ kmem:kmalloc [Tracepoint event]
+ kmem:kmem_cache_alloc [Tracepoint event]
+ kmem:kmalloc_node [Tracepoint event]
+ kmem:kmem_cache_alloc_node [Tracepoint event]
+ kmem:kfree [Tracepoint event]
+ kmem:kmem_cache_free [Tracepoint event]
+ kmem:mm_page_free_direct [Tracepoint event]
+ kmem:mm_pagevec_free [Tracepoint event]
+ kmem:mm_page_alloc [Tracepoint event]
+ kmem:mm_page_alloc_zone_locked [Tracepoint event]
+ kmem:mm_page_pcpu_drain [Tracepoint event]
+ kmem:mm_page_alloc_extfrag [Tracepoint event]
+
+Then any (or all) of the above event sources can be activated and
+measured. For example the page alloc/free properties of a 'hackbench
+run' are:
+
+ titan:~> perf stat -e kmem:mm_page_pcpu_drain -e kmem:mm_page_alloc
+ -e kmem:mm_pagevec_free -e kmem:mm_page_free_direct ./hackbench 10
+ Time: 0.575
+
+ Performance counter stats for './hackbench 10':
+
+ 13857 kmem:mm_page_pcpu_drain
+ 27576 kmem:mm_page_alloc
+ 6025 kmem:mm_pagevec_free
+ 20934 kmem:mm_page_free_direct
+
+ 0.613972165 seconds time elapsed
+
+You can observe the statistical properties as well, by using the
+'repeat the workload N times' feature of perf stat:
+
+ titan:~> perf stat --repeat 5 -e kmem:mm_page_pcpu_drain -e
+ kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+ kmem:mm_page_free_direct ./hackbench 10
+ Time: 0.627
+ Time: 0.644
+ Time: 0.564
+ Time: 0.559
+ Time: 0.626
+
+ Performance counter stats for './hackbench 10' (5 runs):
+
+ 12920 kmem:mm_page_pcpu_drain ( +- 3.359% )
+ 25035 kmem:mm_page_alloc ( +- 3.783% )
+ 6104 kmem:mm_pagevec_free ( +- 0.934% )
+ 18376 kmem:mm_page_free_direct ( +- 4.941% )
+
+ 0.643954516 seconds time elapsed ( +- 2.363% )
+
+Furthermore, these tracepoints can be used to sample the workload as
+well. For example the page allocations done by a 'git gc' can be
+captured the following way:
+
+ titan:~/git> perf record -f -e kmem:mm_page_alloc -c 1 ./git gc
+ Counting objects: 1148, done.
+ Delta compression using up to 2 threads.
+ Compressing objects: 100% (450/450), done.
+ Writing objects: 100% (1148/1148), done.
+ Total 1148 (delta 690), reused 1148 (delta 690)
+ [ perf record: Captured and wrote 0.267 MB perf.data (~11679 samples) ]
+
+To check which functions generated page allocations:
+
+ titan:~/git> perf report
+ # Samples: 10646
+ #
+ # Overhead Command Shared Object
+ # ........ ............... ..........................
+ #
+ 23.57% git-repack /lib64/libc-2.5.so
+ 21.81% git /lib64/libc-2.5.so
+ 14.59% git ./git
+ 11.79% git-repack ./git
+ 7.12% git /lib64/ld-2.5.so
+ 3.16% git-repack /lib64/libpthread-2.5.so
+ 2.09% git-repack /bin/bash
+ 1.97% rm /lib64/libc-2.5.so
+ 1.39% mv /lib64/ld-2.5.so
+ 1.37% mv /lib64/libc-2.5.so
+ 1.12% git-repack /lib64/ld-2.5.so
+ 0.95% rm /lib64/ld-2.5.so
+ 0.90% git-update-serv /lib64/libc-2.5.so
+ 0.73% git-update-serv /lib64/ld-2.5.so
+ 0.68% perf /lib64/libpthread-2.5.so
+ 0.64% git-repack /usr/lib64/libz.so.1.2.3
+
+Or to see it on a more finegrained level:
+
+titan:~/git> perf report --sort comm,dso,symbol
+# Samples: 10646
+#
+# Overhead Command Shared Object Symbol
+# ........ ............... .......................... ......
+#
+ 9.35% git-repack ./git [.] insert_obj_hash
+ 9.12% git ./git [.] insert_obj_hash
+ 7.31% git /lib64/libc-2.5.so [.] memcpy
+ 6.34% git-repack /lib64/libc-2.5.so [.] _int_malloc
+ 6.24% git-repack /lib64/libc-2.5.so [.] memcpy
+ 5.82% git-repack /lib64/libc-2.5.so [.] __GI___fork
+ 5.47% git /lib64/libc-2.5.so [.] _int_malloc
+ 2.99% git /lib64/libc-2.5.so [.] memset
+
+Furthermore, call-graph sampling can be done too, of page
+allocations - to see precisely what kind of page allocations there
+are:
+
+ titan:~/git> perf record -f -g -e kmem:mm_page_alloc -c 1 ./git gc
+ Counting objects: 1148, done.
+ Delta compression using up to 2 threads.
+ Compressing objects: 100% (450/450), done.
+ Writing objects: 100% (1148/1148), done.
+ Total 1148 (delta 690), reused 1148 (delta 690)
+ [ perf record: Captured and wrote 0.963 MB perf.data (~42069 samples) ]
+
+ titan:~/git> perf report -g
+ # Samples: 10686
+ #
+ # Overhead Command Shared Object
+ # ........ ............... ..........................
+ #
+ 23.25% git-repack /lib64/libc-2.5.so
+ |
+ |--50.00%-- _int_free
+ |
+ |--37.50%-- __GI___fork
+ | make_child
+ |
+ |--12.50%-- ptmalloc_unlock_all2
+ | make_child
+ |
+ --6.25%-- __GI_strcpy
+ 21.61% git /lib64/libc-2.5.so
+ |
+ |--30.00%-- __GI_read
+ | |
+ | --83.33%-- git_config_from_file
+ | git_config
+ | |
+ [...]
+
+Or you can observe the whole system's page allocations for 10
+seconds:
+
+titan:~/git> perf stat -a -e kmem:mm_page_pcpu_drain -e
+kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+kmem:mm_page_free_direct sleep 10
+
+ Performance counter stats for 'sleep 10':
+
+ 171585 kmem:mm_page_pcpu_drain
+ 322114 kmem:mm_page_alloc
+ 73623 kmem:mm_pagevec_free
+ 254115 kmem:mm_page_free_direct
+
+ 10.000591410 seconds time elapsed
+
+Or observe how fluctuating the page allocations are, via statistical
+analysis done over ten 1-second intervals:
+
+ titan:~/git> perf stat --repeat 10 -a -e kmem:mm_page_pcpu_drain -e
+ kmem:mm_page_alloc -e kmem:mm_pagevec_free -e
+ kmem:mm_page_free_direct sleep 1
+
+ Performance counter stats for 'sleep 1' (10 runs):
+
+ 17254 kmem:mm_page_pcpu_drain ( +- 3.709% )
+ 34394 kmem:mm_page_alloc ( +- 4.617% )
+ 7509 kmem:mm_pagevec_free ( +- 4.820% )
+ 25653 kmem:mm_page_free_direct ( +- 3.672% )
+
+ 1.058135029 seconds time elapsed ( +- 3.089% )
+
+Or you can annotate the recorded 'git gc' run on a per symbol basis
+and check which instructions/source-code generated page allocations:
+
+ titan:~/git> perf annotate __GI___fork
+ ------------------------------------------------
+ Percent | Source code & Disassembly of libc-2.5.so
+ ------------------------------------------------
+ :
+ :
+ : Disassembly of section .plt:
+ : Disassembly of section .text:
+ :
+ : 00000031a2e95560 <__fork>:
+ [...]
+ 0.00 : 31a2e95602: b8 38 00 00 00 mov $0x38,%eax
+ 0.00 : 31a2e95607: 0f 05 syscall
+ 83.42 : 31a2e95609: 48 3d 00 f0 ff ff cmp $0xfffffffffffff000,%rax
+ 0.00 : 31a2e9560f: 0f 87 4d 01 00 00 ja 31a2e95762 <__fork+0x202>
+ 0.00 : 31a2e95615: 85 c0 test %eax,%eax
+
+( this shows that 83.42% of __GI___fork's page allocations come from
+ the 0x38 system call it performs. )
+
+etc. etc. - a lot more is possible. I could list a dozen of
+other different usecases straight away - neither of which is
+possible via /proc/vmstat.
+
+/proc/vmstat is not in the same league really, in terms of
+expressive power of system analysis and performance
+analysis.
+
+All that the above results needed were those new tracepoints
+in include/tracing/events/kmem.h.
+
+ Ingo
+
+
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 1dbc1ee..6be696b 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -29,13 +29,67 @@
Select the PMU event. Selection can be a symbolic event name
(use 'perf list' to list all events) or a raw PMU
event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ hexadecimal event descriptor.
-a::
- system-wide collection
+ System-wide collection.
-l::
- scale counter values
+ Scale counter values.
+
+-p::
+--pid=::
+ Record events on existing pid.
+
+-r::
+--realtime=::
+ Collect data with this RT SCHED_FIFO priority.
+-A::
+--append::
+ Append to the output file to do incremental profiling.
+
+-f::
+--force::
+ Overwrite existing data file.
+
+-c::
+--count=::
+ Event period to sample.
+
+-o::
+--output=::
+ Output file name.
+
+-i::
+--inherit::
+ Child tasks inherit counters.
+-F::
+--freq=::
+ Profile at this frequency.
+
+-m::
+--mmap-pages=::
+ Number of mmap data pages.
+
+-g::
+--call-graph::
+ Do call-graph (stack chain/backtrace) recording.
+
+-v::
+--verbose::
+ Be more verbose (show counter open errors, etc).
+
+-s::
+--stat::
+ Per thread counts.
+
+-d::
+--data::
+ Sample addresses.
+
+-n::
+--no-samples::
+ Don't sample.
SEE ALSO
--------
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 52d3fc6..e72e931 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -13,13 +13,40 @@
DESCRIPTION
-----------
This command displays the performance counter profile information recorded
-via perf report.
+via perf record.
OPTIONS
-------
-i::
--input=::
Input file name. (default: perf.data)
+-d::
+--dsos=::
+ Only consider symbols in these dsos. CSV that understands
+ file://filename entries.
+-n
+--show-nr-samples
+ Show the number of samples for each symbol
+-C::
+--comms=::
+ Only consider symbols in these comms. CSV that understands
+ file://filename entries.
+-S::
+--symbols=::
+ Only consider these symbols. CSV that understands
+ file://filename entries.
+
+-w::
+--field-width=::
+ Force each column width to the provided list, for large terminal
+ readability.
+
+-t::
+--field-separator=::
+
+ Use a special separator character and don't pad with spaces, replacing
+ all occurances of this separator in symbol names (and other output)
+ with a '.' character, that thus it's the only non valid separator.
SEE ALSO
--------
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index c368a72..484080d 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -8,8 +8,8 @@
SYNOPSIS
--------
[verse]
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>]
DESCRIPTION
-----------
@@ -40,7 +40,7 @@
-a::
system-wide collection
--l::
+-c::
scale counter values
EXAMPLES
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 539d012..4a7d558 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -3,36 +3,122 @@
NAME
----
-perf-top - Run a command and profile it
+perf-top - System profiling tool.
SYNOPSIS
--------
[verse]
-'perf top' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
+'perf top' [-e <EVENT> | --event=EVENT] [<options>]
DESCRIPTION
-----------
-This command runs a command and gathers a performance counter profile
-from it.
+This command generates and displays a performance counter profile in realtime.
OPTIONS
-------
-<command>...::
- Any command you can specify in a shell.
+-a::
+--all-cpus::
+ System-wide collection. (default)
--e::
---event=::
+-c <count>::
+--count=<count>::
+ Event period to sample.
+
+-C <cpu>::
+--CPU=<cpu>::
+ CPU to profile.
+
+-d <seconds>::
+--delay=<seconds>::
+ Number of seconds to delay between refreshes.
+
+-e <event>::
+--event=<event>::
Select the PMU event. Selection can be a symbolic event name
(use 'perf list' to list all events) or a raw PMU
event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ hexadecimal event descriptor.
--a::
- system-wide collection
+-E <entries>::
+--entries=<entries>::
+ Display this many functions.
--l::
- scale counter values
+-f <count>::
+--count-filter=<count>::
+ Only display functions with more events than this.
+
+-F <freq>::
+--freq=<freq>::
+ Profile at this frequency.
+
+-i::
+--inherit::
+ Child tasks inherit counters, only makes sens with -p option.
+
+-k <path>::
+--vmlinux=<path>::
+ Path to vmlinux. Required for annotation functionality.
+
+-m <pages>::
+--mmap-pages=<pages>::
+ Number of mmapped data pages.
+
+-p <pid>::
+--pid=<pid>::
+ Profile events on existing pid.
+
+-r <priority>::
+--realtime=<priority>::
+ Collect data with this RT SCHED_FIFO priority.
+
+-s <symbol>::
+--sym-annotate=<symbol>::
+ Annotate this symbol. Requires -k option.
+
+-v::
+--verbose::
+ Be more verbose (show counter open errors, etc).
+
+-z::
+--zero::
+ Zero history across display updates.
+
+INTERACTIVE PROMPTING KEYS
+--------------------------
+
+[d]::
+ Display refresh delay.
+
+[e]::
+ Number of entries to display.
+
+[E]::
+ Event to display when multiple counters are active.
+
+[f]::
+ Profile display filter (>= hit count).
+
+[F]::
+ Annotation display filter (>= % of total).
+
+[s]::
+ Annotate symbol.
+
+[S]::
+ Stop annotation, return to full profile display.
+
+[w]::
+ Toggle between weighted sum and individual count[E]r profile.
+
+[z]::
+ Toggle event count zeroing across display updates.
+
+[qQ]::
+ Quit.
+
+Pressing any unmapped key displays a menu, and prompts for input.
+
SEE ALSO
--------
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 36d7eef..c045b42 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -158,13 +158,15 @@
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
# If we're on a 64-bit kernel, use -m64
-ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
- M64 := -m64
+ifndef NO_64BIT
+ ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
+ M64 := -m64
+ endif
endif
# CFLAGS and LDFLAGS are for the users to override from the command line.
-CFLAGS = $(M64) -ggdb3 -Wall -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
+CFLAGS = $(M64) -ggdb3 -Wall -Wextra -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement -Werror -O6
LDFLAGS = -lpthread -lrt -lelf -lm
ALL_CFLAGS = $(CFLAGS)
ALL_LDFLAGS = $(LDFLAGS)
@@ -223,7 +225,7 @@
# Those must not be GNU-specific; they are shared with perl/ which may
# be built by a different compiler. (Note that this is an artifact now
# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS =
+BASIC_CFLAGS = -Iutil/include
BASIC_LDFLAGS =
# Guard against environment variables
@@ -289,10 +291,11 @@
LIB_FILE=libperf.a
LIB_H += ../../include/linux/perf_counter.h
+LIB_H += ../../include/linux/rbtree.h
+LIB_H += ../../include/linux/list.h
+LIB_H += util/include/linux/list.h
LIB_H += perf.h
-LIB_H += types.h
-LIB_H += util/list.h
-LIB_H += util/rbtree.h
+LIB_H += util/types.h
LIB_H += util/levenshtein.h
LIB_H += util/parse-options.h
LIB_H += util/parse-events.h
@@ -301,9 +304,11 @@
LIB_H += util/help.h
LIB_H += util/strbuf.h
LIB_H += util/string.h
+LIB_H += util/strlist.h
LIB_H += util/run-command.h
LIB_H += util/sigchain.h
LIB_H += util/symbol.h
+LIB_H += util/module.h
LIB_H += util/color.h
LIB_OBJS += util/abspath.o
@@ -322,12 +327,16 @@
LIB_OBJS += util/quote.o
LIB_OBJS += util/strbuf.o
LIB_OBJS += util/string.o
+LIB_OBJS += util/strlist.o
LIB_OBJS += util/usage.o
LIB_OBJS += util/wrapper.o
LIB_OBJS += util/sigchain.o
LIB_OBJS += util/symbol.o
+LIB_OBJS += util/module.o
LIB_OBJS += util/color.o
LIB_OBJS += util/pager.o
+LIB_OBJS += util/header.o
+LIB_OBJS += util/callchain.o
BUILTIN_OBJS += builtin-annotate.o
BUILTIN_OBJS += builtin-help.o
@@ -338,7 +347,6 @@
BUILTIN_OBJS += builtin-top.o
PERFLIBS = $(LIB_FILE)
-EXTLIBS =
#
# Platform specific tweaks
@@ -367,6 +375,39 @@
PTHREAD_LIBS =
endif
+ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
+ msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
+endif
+
+ifdef NO_DEMANGLE
+ BASIC_CFLAGS += -DNO_DEMANGLE
+else
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd > /dev/null 2>&1 && echo y")
+
+ ifeq ($(has_bfd),y)
+ EXTLIBS += -lbfd
+ else
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty > /dev/null 2>&1 && echo y")
+ ifeq ($(has_bfd_iberty),y)
+ EXTLIBS += -lbfd -liberty
+ else
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty -lz > /dev/null 2>&1 && echo y")
+ ifeq ($(has_bfd_iberty_z),y)
+ EXTLIBS += -lbfd -liberty -lz
+ else
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -liberty > /dev/null 2>&1 && echo y")
+ ifeq ($(has_cplus_demangle),y)
+ EXTLIBS += -liberty
+ BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
+ else
+ msg := $(warning No bfd.h/libbfd found, install binutils-dev[el] to gain symbol demangling)
+ BASIC_CFLAGS += -DNO_DEMANGLE
+ endif
+ endif
+ endif
+ endif
+endif
+
ifndef CC_LD_DYNPATH
ifdef NO_R_TO_GCC_LINKER
# Some gcc does not accept and pass -R to the linker to specify
@@ -377,12 +418,6 @@
endif
endif
-ifdef ZLIB_PATH
- BASIC_CFLAGS += -I$(ZLIB_PATH)/include
- EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib)
-endif
-EXTLIBS += -lz
-
ifdef NEEDS_SOCKET
EXTLIBS += -lsocket
endif
@@ -693,6 +728,9 @@
util/config.o: util/config.c PERF-CFLAGS
$(QUIET_CC)$(CC) -o $*.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+util/rbtree.o: ../../lib/rbtree.c PERF-CFLAGS
+ $(QUIET_CC)$(CC) -o util/rbtree.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
perf-%$X: %.o $(PERFLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 7e58e3a..1dba568 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -10,9 +10,9 @@
#include "util/util.h"
#include "util/color.h"
-#include "util/list.h"
+#include <linux/list.h>
#include "util/cache.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
#include "util/symbol.h"
#include "util/string.h"
@@ -25,10 +25,6 @@
#define SHOW_USER 2
#define SHOW_HV 4
-#define MIN_GREEN 0.5
-#define MIN_RED 5.0
-
-
static char const *input_name = "perf.data";
static char *vmlinux = "vmlinux";
@@ -43,6 +39,10 @@
static int verbose;
+static int modules;
+
+static int full_paths;
+
static int print_line;
static unsigned long page_size;
@@ -74,20 +74,12 @@
u32 pid, ppid;
};
-struct period_event {
- struct perf_event_header header;
- u64 time;
- u64 id;
- u64 sample_period;
-};
-
typedef union event_union {
struct perf_event_header header;
struct ip_event ip;
struct mmap_event mmap;
struct comm_event comm;
struct fork_event fork;
- struct period_event period;
} event_t;
@@ -160,7 +152,7 @@
static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
{
- return dso__find_symbol(kernel_dso, ip);
+ return dso__find_symbol(dso, ip);
}
static int load_kernel(void)
@@ -171,8 +163,8 @@
if (!kernel_dso)
return -1;
- err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
- if (err) {
+ err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
+ if (err <= 0) {
dso__delete(kernel_dso);
kernel_dso = NULL;
} else
@@ -203,7 +195,7 @@
return ip - map->start + map->pgoff;
}
-static u64 vdso__map_ip(struct map *map, u64 ip)
+static u64 vdso__map_ip(struct map *map __used, u64 ip)
{
return ip;
}
@@ -600,7 +592,7 @@
static int sort_dimension__add(char *tok)
{
- int i;
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
struct sort_dimension *sd = &sort_dimensions[i];
@@ -855,7 +847,7 @@
total_unknown = 0;
static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
{
char level;
int show = 0;
@@ -998,25 +990,12 @@
}
static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
- dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
- (void *)(offset + head),
- (void *)(long)(event->header.size),
- event->period.time,
- event->period.id,
- event->period.sample_period);
-
- return 0;
-}
-
-static int
process_event(event_t *event, unsigned long offset, unsigned long head)
{
- if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
- return process_overflow_event(event, offset, head);
-
switch (event->header.type) {
+ case PERF_EVENT_SAMPLE:
+ return process_sample_event(event, offset, head);
+
case PERF_EVENT_MMAP:
return process_mmap_event(event, offset, head);
@@ -1025,9 +1004,6 @@
case PERF_EVENT_FORK:
return process_fork_event(event, offset, head);
-
- case PERF_EVENT_PERIOD:
- return process_period_event(event, offset, head);
/*
* We dont process them right now but they are fine:
*/
@@ -1043,24 +1019,6 @@
return 0;
}
-static char *get_color(double percent)
-{
- char *color = PERF_COLOR_NORMAL;
-
- /*
- * We color high-overhead entries in red, mid-overhead
- * entries in green - and keep the low overhead places
- * normal:
- */
- if (percent >= MIN_RED)
- color = PERF_COLOR_RED;
- else {
- if (percent > MIN_GREEN)
- color = PERF_COLOR_GREEN;
- }
- return color;
-}
-
static int
parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
{
@@ -1069,7 +1027,7 @@
static const char *prev_color;
unsigned int offset;
size_t line_len;
- u64 line_ip;
+ s64 line_ip;
int ret;
char *c;
@@ -1122,7 +1080,7 @@
} else if (sym->hist_sum)
percent = 100.0 * hits / sym->hist_sum;
- color = get_color(percent);
+ color = get_percent_color(percent);
/*
* Also color the filename and line if needed, with
@@ -1258,7 +1216,7 @@
sym_ext = rb_entry(node, struct sym_ext, node);
percent = sym_ext->percent;
- color = get_color(percent);
+ color = get_percent_color(percent);
path = sym_ext->path;
color_fprintf(stdout, color, " %7.2f %s", percent, path);
@@ -1268,19 +1226,25 @@
static void annotate_sym(struct dso *dso, struct symbol *sym)
{
- char *filename = dso->name;
+ char *filename = dso->name, *d_filename;
u64 start, end, len;
char command[PATH_MAX*2];
FILE *file;
if (!filename)
return;
- if (dso == kernel_dso)
+ if (sym->module)
+ filename = sym->module->path;
+ else if (dso == kernel_dso)
filename = vmlinux;
start = sym->obj_start;
if (!start)
start = sym->start;
+ if (full_paths)
+ d_filename = filename;
+ else
+ d_filename = basename(filename);
end = start + sym->end - sym->start + 1;
len = sym->end - sym->start;
@@ -1291,13 +1255,14 @@
}
printf("\n\n------------------------------------------------\n");
- printf(" Percent | Source code & Disassembly of %s\n", filename);
+ printf(" Percent | Source code & Disassembly of %s\n", d_filename);
printf("------------------------------------------------\n");
if (verbose >= 2)
printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
- sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", (u64)start, (u64)end, filename);
+ sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s|grep -v %s",
+ (u64)start, (u64)end, filename, filename);
if (verbose >= 3)
printf("doing: %s\n", command);
@@ -1428,7 +1393,7 @@
head += size;
- if (offset + head < stat.st_size)
+ if (offset + head < (unsigned long)stat.st_size)
goto more;
rc = EXIT_SUCCESS;
@@ -1472,8 +1437,12 @@
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('m', "modules", &modules,
+ "load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('l', "print-line", &print_line,
"print matching source lines (may be slow)"),
+ OPT_BOOLEAN('P', "full-paths", &full_paths,
+ "Don't shorten the displayed pathnames"),
OPT_END()
};
@@ -1492,7 +1461,7 @@
free(str);
}
-int cmd_annotate(int argc, const char **argv, const char *prefix)
+int cmd_annotate(int argc, const char **argv, const char *prefix __used)
{
symbol__init();
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 0f32dc3..2599d86 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -3,6 +3,7 @@
*
* Builtin help command
*/
+#include "perf.h"
#include "util/cache.h"
#include "builtin.h"
#include "util/exec_cmd.h"
@@ -277,7 +278,7 @@
void list_common_cmds_help(void)
{
- int i, longest = 0;
+ unsigned int i, longest = 0;
for (i = 0; i < ARRAY_SIZE(common_cmds); i++) {
if (longest < strlen(common_cmds[i].name))
@@ -415,9 +416,10 @@
open_html(page_path.buf);
}
-int cmd_help(int argc, const char **argv, const char *prefix)
+int cmd_help(int argc, const char **argv, const char *prefix __used)
{
const char *alias;
+
load_command_list("perf-", &main_cmds, &other_cmds);
perf_config(perf_help_config, NULL);
diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c
index fe60e37..d88c696 100644
--- a/tools/perf/builtin-list.c
+++ b/tools/perf/builtin-list.c
@@ -10,11 +10,12 @@
#include "perf.h"
-#include "util/parse-options.h"
#include "util/parse-events.h"
+#include "util/cache.h"
-int cmd_list(int argc, const char **argv, const char *prefix)
+int cmd_list(int argc __used, const char **argv __used, const char *prefix __used)
{
+ setup_pager();
print_events();
return 0;
}
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index d7ebbd7..3d051b9 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -14,6 +14,8 @@
#include "util/parse-events.h"
#include "util/string.h"
+#include "util/header.h"
+
#include <unistd.h>
#include <sched.h>
@@ -32,13 +34,18 @@
static const char *output_name = "perf.data";
static int group = 0;
static unsigned int realtime_prio = 0;
+static int raw_samples = 0;
static int system_wide = 0;
+static int profile_cpu = -1;
static pid_t target_pid = -1;
static int inherit = 1;
static int force = 0;
static int append_file = 0;
static int call_graph = 0;
static int verbose = 0;
+static int inherit_stat = 0;
+static int no_samples = 0;
+static int sample_address = 0;
static long samples;
static struct timeval last_read;
@@ -52,7 +59,8 @@
static int nr_cpu;
static int file_new = 1;
-static struct perf_file_header file_header;
+
+struct perf_header *header;
struct mmap_event {
struct perf_event_header header;
@@ -197,46 +205,48 @@
kill(getpid(), signr);
}
-static void pid_synthesize_comm_event(pid_t pid, int full)
+static pid_t pid_synthesize_comm_event(pid_t pid, int full)
{
struct comm_event comm_ev;
char filename[PATH_MAX];
char bf[BUFSIZ];
- int fd;
- size_t size;
- char *field, *sep;
+ FILE *fp;
+ size_t size = 0;
DIR *tasks;
struct dirent dirent, *next;
+ pid_t tgid = 0;
- snprintf(filename, sizeof(filename), "/proc/%d/stat", pid);
+ snprintf(filename, sizeof(filename), "/proc/%d/status", pid);
- fd = open(filename, O_RDONLY);
- if (fd < 0) {
+ fp = fopen(filename, "r");
+ if (fd == NULL) {
/*
* We raced with a task exiting - just return:
*/
if (verbose)
fprintf(stderr, "couldn't open %s\n", filename);
- return;
+ return 0;
}
- if (read(fd, bf, sizeof(bf)) < 0) {
- fprintf(stderr, "couldn't read %s\n", filename);
- exit(EXIT_FAILURE);
- }
- close(fd);
- /* 9027 (cat) R 6747 9027 6747 34816 9027 ... */
memset(&comm_ev, 0, sizeof(comm_ev));
- field = strchr(bf, '(');
- if (field == NULL)
- goto out_failure;
- sep = strchr(++field, ')');
- if (sep == NULL)
- goto out_failure;
- size = sep - field;
- memcpy(comm_ev.comm, field, size++);
+ while (!comm_ev.comm[0] || !comm_ev.pid) {
+ if (fgets(bf, sizeof(bf), fp) == NULL)
+ goto out_failure;
- comm_ev.pid = pid;
+ if (memcmp(bf, "Name:", 5) == 0) {
+ char *name = bf + 5;
+ while (*name && isspace(*name))
+ ++name;
+ size = strlen(name) - 1;
+ memcpy(comm_ev.comm, name, size++);
+ } else if (memcmp(bf, "Tgid:", 5) == 0) {
+ char *tgids = bf + 5;
+ while (*tgids && isspace(*tgids))
+ ++tgids;
+ tgid = comm_ev.pid = atoi(tgids);
+ }
+ }
+
comm_ev.header.type = PERF_EVENT_COMM;
size = ALIGN(size, sizeof(u64));
comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size);
@@ -245,7 +255,7 @@
comm_ev.tid = pid;
write_output(&comm_ev, comm_ev.header.size);
- return;
+ goto out_fclose;
}
snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
@@ -262,7 +272,10 @@
write_output(&comm_ev, comm_ev.header.size);
}
closedir(tasks);
- return;
+
+out_fclose:
+ fclose(fp);
+ return tgid;
out_failure:
fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n",
@@ -270,7 +283,7 @@
exit(EXIT_FAILURE);
}
-static void pid_synthesize_mmap_samples(pid_t pid)
+static void pid_synthesize_mmap_samples(pid_t pid, pid_t tgid)
{
char filename[PATH_MAX];
FILE *fp;
@@ -289,7 +302,7 @@
while (1) {
char bf[BUFSIZ], *pbf = bf;
struct mmap_event mmap_ev = {
- .header.type = PERF_EVENT_MMAP,
+ .header = { .type = PERF_EVENT_MMAP },
};
int n;
size_t size;
@@ -306,12 +319,15 @@
continue;
pbf += n + 3;
if (*pbf == 'x') { /* vm_exec */
- char *execname = strrchr(bf, ' ');
+ char *execname = strchr(bf, '/');
- if (execname == NULL || execname[1] != '/')
+ /* Catch VDSO */
+ if (execname == NULL)
+ execname = strstr(bf, "[vdso]");
+
+ if (execname == NULL)
continue;
- execname += 1;
size = strlen(execname);
execname[size - 1] = '\0'; /* Remove \n */
memcpy(mmap_ev.filename, execname, size);
@@ -319,7 +335,7 @@
mmap_ev.len -= mmap_ev.start;
mmap_ev.header.size = (sizeof(mmap_ev) -
(sizeof(mmap_ev.filename) - size));
- mmap_ev.pid = pid;
+ mmap_ev.pid = tgid;
mmap_ev.tid = pid;
write_output(&mmap_ev, mmap_ev.header.size);
@@ -329,7 +345,7 @@
fclose(fp);
}
-static void synthesize_samples(void)
+static void synthesize_all(void)
{
DIR *proc;
struct dirent dirent, *next;
@@ -338,14 +354,14 @@
while (!readdir_r(proc, &dirent, &next) && next) {
char *end;
- pid_t pid;
+ pid_t pid, tgid;
pid = strtol(dirent.d_name, &end, 10);
if (*end) /* only interested in proper numerical dirents */
continue;
- pid_synthesize_comm_event(pid, 1);
- pid_synthesize_mmap_samples(pid);
+ tgid = pid_synthesize_comm_event(pid, 1);
+ pid_synthesize_mmap_samples(pid, tgid);
}
closedir(proc);
@@ -353,12 +369,37 @@
static int group_fd;
+static struct perf_header_attr *get_header_attr(struct perf_counter_attr *a, int nr)
+{
+ struct perf_header_attr *h_attr;
+
+ if (nr < header->attrs) {
+ h_attr = header->attr[nr];
+ } else {
+ h_attr = perf_header_attr__new(a);
+ perf_header__add_attr(header, h_attr);
+ }
+
+ return h_attr;
+}
+
static void create_counter(int counter, int cpu, pid_t pid)
{
struct perf_counter_attr *attr = attrs + counter;
- int track = 1;
+ struct perf_header_attr *h_attr;
+ int track = !counter; /* only the first counter needs these */
+ struct {
+ u64 count;
+ u64 time_enabled;
+ u64 time_running;
+ u64 id;
+ } read_data;
- attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
+ attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
+ PERF_FORMAT_TOTAL_TIME_RUNNING |
+ PERF_FORMAT_ID;
+
+ attr->sample_type |= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
if (freq) {
attr->sample_type |= PERF_SAMPLE_PERIOD;
@@ -366,25 +407,26 @@
attr->sample_freq = freq;
}
+ if (no_samples)
+ attr->sample_freq = 0;
+
+ if (inherit_stat)
+ attr->inherit_stat = 1;
+
+ if (sample_address)
+ attr->sample_type |= PERF_SAMPLE_ADDR;
+
if (call_graph)
attr->sample_type |= PERF_SAMPLE_CALLCHAIN;
- if (file_new) {
- file_header.sample_type = attr->sample_type;
- } else {
- if (file_header.sample_type != attr->sample_type) {
- fprintf(stderr, "incompatible append\n");
- exit(-1);
- }
- }
+ if (raw_samples)
+ attr->sample_type |= PERF_SAMPLE_RAW;
attr->mmap = track;
attr->comm = track;
attr->inherit = (cpu < 0) && inherit;
attr->disabled = 1;
- track = 0; /* only the first counter needs these */
-
try_again:
fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0);
@@ -393,6 +435,8 @@
if (err == EPERM)
die("Permission error - are you root?\n");
+ else if (err == ENODEV && profile_cpu != -1)
+ die("No such device - did you specify an out-of-range profile CPU?\n");
/*
* If it's cycles then fall back to hrtimer
@@ -415,6 +459,22 @@
exit(-1);
}
+ h_attr = get_header_attr(attr, counter);
+
+ if (!file_new) {
+ if (memcmp(&h_attr->attr, attr, sizeof(*attr))) {
+ fprintf(stderr, "incompatible append\n");
+ exit(-1);
+ }
+ }
+
+ if (read(fd[nr_cpu][counter], &read_data, sizeof(read_data)) == -1) {
+ perror("Unable to read perf file descriptor\n");
+ exit(-1);
+ }
+
+ perf_header_attr__add_id(h_attr, read_data.id);
+
assert(fd[nr_cpu][counter] >= 0);
fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK);
@@ -445,11 +505,6 @@
{
int counter;
- if (pid > 0) {
- pid_synthesize_comm_event(pid, 0);
- pid_synthesize_mmap_samples(pid);
- }
-
group_fd = -1;
for (counter = 0; counter < nr_counters; counter++)
create_counter(counter, cpu, pid);
@@ -459,17 +514,16 @@
static void atexit_header(void)
{
- file_header.data_size += bytes_written;
+ header->data_size += bytes_written;
- if (pwrite(output, &file_header, sizeof(file_header), 0) == -1)
- perror("failed to write on file headers");
+ perf_header__write(header, output);
}
static int __cmd_record(int argc, const char **argv)
{
int i, counter;
struct stat st;
- pid_t pid;
+ pid_t pid = 0;
int flags;
int ret;
@@ -482,10 +536,14 @@
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
- if (!stat(output_name, &st) && !force && !append_file) {
- fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
- output_name);
- exit(-1);
+ if (!stat(output_name, &st) && st.st_size) {
+ if (!force && !append_file) {
+ fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n",
+ output_name);
+ exit(-1);
+ }
+ } else {
+ append_file = 0;
}
flags = O_CREAT|O_RDWR;
@@ -500,21 +558,36 @@
exit(-1);
}
- if (!file_new) {
- if (read(output, &file_header, sizeof(file_header)) == -1) {
- perror("failed to read file headers");
- exit(-1);
- }
-
- lseek(output, file_header.data_size, SEEK_CUR);
- }
+ if (!file_new)
+ header = perf_header__read(output);
+ else
+ header = perf_header__new();
atexit(atexit_header);
if (!system_wide) {
- open_counters(-1, target_pid != -1 ? target_pid : getpid());
- } else for (i = 0; i < nr_cpus; i++)
- open_counters(i, target_pid);
+ pid = target_pid;
+ if (pid == -1)
+ pid = getpid();
+
+ open_counters(profile_cpu, pid);
+ } else {
+ if (profile_cpu != -1) {
+ open_counters(profile_cpu, target_pid);
+ } else {
+ for (i = 0; i < nr_cpus; i++)
+ open_counters(i, target_pid);
+ }
+ }
+
+ if (file_new)
+ perf_header__write(header, output);
+
+ if (!system_wide) {
+ pid_t tgid = pid_synthesize_comm_event(pid, 0);
+ pid_synthesize_mmap_samples(pid, tgid);
+ } else
+ synthesize_all();
if (target_pid == -1 && argc) {
pid = fork();
@@ -539,10 +612,7 @@
}
}
- if (system_wide)
- synthesize_samples();
-
- while (!done) {
+ for (;;) {
int hits = samples;
for (i = 0; i < nr_cpu; i++) {
@@ -550,8 +620,11 @@
mmap_read(&mmap_array[i][counter]);
}
- if (hits == samples)
+ if (hits == samples) {
+ if (done)
+ break;
ret = poll(event_array, nr_poll, 100);
+ }
}
/*
@@ -580,10 +653,14 @@
"record events on existing pid"),
OPT_INTEGER('r', "realtime", &realtime_prio,
"collect data with this RT SCHED_FIFO priority"),
+ OPT_BOOLEAN('R', "raw-samples", &raw_samples,
+ "collect raw sample records from all opened counters"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
OPT_BOOLEAN('A', "append", &append_file,
"append to the output file to do incremental profiling"),
+ OPT_INTEGER('C', "profile_cpu", &profile_cpu,
+ "CPU to profile on"),
OPT_BOOLEAN('f', "force", &force,
"overwrite existing data file"),
OPT_LONG('c', "count", &default_interval,
@@ -600,14 +677,21 @@
"do call-graph (stack chain/backtrace) recording"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
+ OPT_BOOLEAN('s', "stat", &inherit_stat,
+ "per thread counts"),
+ OPT_BOOLEAN('d', "data", &sample_address,
+ "Sample addresses"),
+ OPT_BOOLEAN('n', "no-samples", &no_samples,
+ "don't sample"),
OPT_END()
};
-int cmd_record(int argc, const char **argv, const char *prefix)
+int cmd_record(int argc, const char **argv, const char *prefix __used)
{
int counter;
- argc = parse_options(argc, argv, options, record_usage, 0);
+ argc = parse_options(argc, argv, options, record_usage,
+ PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc && target_pid == -1 && !system_wide)
usage_with_options(record_usage, options);
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5eb5566..b53a60f 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -10,13 +10,16 @@
#include "util/util.h"
#include "util/color.h"
-#include "util/list.h"
+#include <linux/list.h>
#include "util/cache.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
#include "util/symbol.h"
#include "util/string.h"
+#include "util/callchain.h"
+#include "util/strlist.h"
#include "perf.h"
+#include "util/header.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
@@ -28,8 +31,12 @@
static char const *input_name = "perf.data";
static char *vmlinux = NULL;
-static char default_sort_order[] = "comm,dso";
+static char default_sort_order[] = "comm,dso,symbol";
static char *sort_order = default_sort_order;
+static char *dso_list_str, *comm_list_str, *sym_list_str,
+ *col_width_list_str;
+static struct strlist *dso_list, *comm_list, *sym_list;
+static char *field_sep;
static int input;
static int show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
@@ -41,7 +48,10 @@
static int verbose;
#define eprintf(x...) do { if (verbose) fprintf(stderr, x); } while (0)
+static int modules;
+
static int full_paths;
+static int show_nr_samples;
static unsigned long page_size;
static unsigned long mmap_window = 32;
@@ -52,6 +62,18 @@
static int exclude_other = 1;
+static char callchain_default_opt[] = "fractal,0.5";
+
+static int callchain;
+
+static
+struct callchain_param callchain_param = {
+ .mode = CHAIN_GRAPH_REL,
+ .min_percent = 0.5
+};
+
+static u64 sample_type;
+
struct ip_event {
struct perf_event_header header;
u64 ip;
@@ -59,11 +81,6 @@
unsigned char __more_data[];
};
-struct ip_callchain {
- u64 nr;
- u64 ips[0];
-};
-
struct mmap_event {
struct perf_event_header header;
u32 pid, tid;
@@ -82,13 +99,7 @@
struct fork_event {
struct perf_event_header header;
u32 pid, ppid;
-};
-
-struct period_event {
- struct perf_event_header header;
- u64 time;
- u64 id;
- u64 sample_period;
+ u32 tid, ptid;
};
struct lost_event {
@@ -97,19 +108,56 @@
u64 lost;
};
+struct read_event {
+ struct perf_event_header header;
+ u32 pid,tid;
+ u64 value;
+ u64 time_enabled;
+ u64 time_running;
+ u64 id;
+};
+
typedef union event_union {
struct perf_event_header header;
struct ip_event ip;
struct mmap_event mmap;
struct comm_event comm;
struct fork_event fork;
- struct period_event period;
struct lost_event lost;
+ struct read_event read;
} event_t;
+static int repsep_fprintf(FILE *fp, const char *fmt, ...)
+{
+ int n;
+ va_list ap;
+
+ va_start(ap, fmt);
+ if (!field_sep)
+ n = vfprintf(fp, fmt, ap);
+ else {
+ char *bf = NULL;
+ n = vasprintf(&bf, fmt, ap);
+ if (n > 0) {
+ char *sep = bf;
+ while (1) {
+ sep = strchr(sep, *field_sep);
+ if (sep == NULL)
+ break;
+ *sep = '.';
+ }
+ }
+ fputs(bf, fp);
+ free(bf);
+ }
+ va_end(ap);
+ return n;
+}
+
static LIST_HEAD(dsos);
static struct dso *kernel_dso;
static struct dso *vdso;
+static struct dso *hypervisor_dso;
static void dsos__add(struct dso *dso)
{
@@ -165,7 +213,7 @@
static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
{
- return dso__find_symbol(kernel_dso, ip);
+ return dso__find_symbol(dso, ip);
}
static int load_kernel(void)
@@ -176,8 +224,8 @@
if (!kernel_dso)
return -1;
- err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose);
- if (err) {
+ err = dso__load_kernel(kernel_dso, vmlinux, NULL, verbose, modules);
+ if (err <= 0) {
dso__delete(kernel_dso);
kernel_dso = NULL;
} else
@@ -191,6 +239,11 @@
dsos__add(vdso);
+ hypervisor_dso = dso__new("[hypervisor]", 0);
+ if (!hypervisor_dso)
+ return -1;
+ dsos__add(hypervisor_dso);
+
return err;
}
@@ -202,7 +255,7 @@
{
int n = 0;
- while (pathname[n] == cwd[n] && n < cwdlen)
+ while (n < cwdlen && pathname[n] == cwd[n])
++n;
return n;
@@ -222,14 +275,14 @@
return ip - map->start + map->pgoff;
}
-static u64 vdso__map_ip(struct map *map, u64 ip)
+static u64 vdso__map_ip(struct map *map __used, u64 ip)
{
return ip;
}
static inline int is_anon_memory(const char *filename)
{
- return strcmp(filename, "//anon") == 0;
+ return strcmp(filename, "//anon") == 0;
}
static struct map *map__new(struct mmap_event *event)
@@ -332,12 +385,28 @@
return self;
}
+static unsigned int dsos__col_width,
+ comms__col_width,
+ threads__col_width;
+
static int thread__set_comm(struct thread *self, const char *comm)
{
if (self->comm)
free(self->comm);
self->comm = strdup(comm);
- return self->comm ? 0 : -ENOMEM;
+ if (!self->comm)
+ return -ENOMEM;
+
+ if (!col_width_list_str && !field_sep &&
+ (!comm_list || strlist__has_entry(comm_list, comm))) {
+ unsigned int slen = strlen(comm);
+ if (slen > comms__col_width) {
+ comms__col_width = slen;
+ threads__col_width = slen + 6;
+ }
+ }
+
+ return 0;
}
static size_t thread__fprintf(struct thread *self, FILE *fp)
@@ -400,9 +469,27 @@
list_for_each_entry_safe(pos, tmp, &self->maps, node) {
if (map__overlap(pos, map)) {
- list_del_init(&pos->node);
- /* XXX leaks dsos */
- free(pos);
+ if (verbose >= 2) {
+ printf("overlapping maps:\n");
+ map__fprintf(map, stdout);
+ map__fprintf(pos, stdout);
+ }
+
+ if (map->start <= pos->start && map->end > pos->start)
+ pos->start = map->end;
+
+ if (map->end >= pos->end && map->start < pos->end)
+ pos->end = map->start;
+
+ if (verbose >= 2) {
+ printf("after collision:\n");
+ map__fprintf(pos, stdout);
+ }
+
+ if (pos->start >= pos->end) {
+ list_del_init(&pos->node);
+ free(pos);
+ }
}
}
@@ -464,17 +551,19 @@
static struct rb_root hist;
struct hist_entry {
- struct rb_node rb_node;
+ struct rb_node rb_node;
- struct thread *thread;
- struct map *map;
- struct dso *dso;
- struct symbol *sym;
- struct symbol *parent;
- u64 ip;
- char level;
+ struct thread *thread;
+ struct map *map;
+ struct dso *dso;
+ struct symbol *sym;
+ struct symbol *parent;
+ u64 ip;
+ char level;
+ struct callchain_node callchain;
+ struct rb_root sorted_chain;
- u64 count;
+ u64 count;
};
/*
@@ -488,7 +577,9 @@
int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
- size_t (*print)(FILE *fp, struct hist_entry *);
+ size_t (*print)(FILE *fp, struct hist_entry *, unsigned int width);
+ unsigned int *width;
+ bool elide;
};
static int64_t cmp_null(void *l, void *r)
@@ -510,15 +601,17 @@
}
static size_t
-sort__thread_print(FILE *fp, struct hist_entry *self)
+sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
- return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
+ return repsep_fprintf(fp, "%*s:%5d", width - 6,
+ self->thread->comm ?: "", self->thread->pid);
}
static struct sort_entry sort_thread = {
- .header = " Command: Pid",
+ .header = "Command: Pid",
.cmp = sort__thread_cmp,
.print = sort__thread_print,
+ .width = &threads__col_width,
};
/* --sort comm */
@@ -542,16 +635,17 @@
}
static size_t
-sort__comm_print(FILE *fp, struct hist_entry *self)
+sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
- return fprintf(fp, "%16s", self->thread->comm);
+ return repsep_fprintf(fp, "%*s", width, self->thread->comm);
}
static struct sort_entry sort_comm = {
- .header = " Command",
+ .header = "Command",
.cmp = sort__comm_cmp,
.collapse = sort__comm_collapse,
.print = sort__comm_print,
+ .width = &comms__col_width,
};
/* --sort dso */
@@ -569,18 +663,19 @@
}
static size_t
-sort__dso_print(FILE *fp, struct hist_entry *self)
+sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
if (self->dso)
- return fprintf(fp, "%-25s", self->dso->name);
+ return repsep_fprintf(fp, "%-*s", width, self->dso->name);
- return fprintf(fp, "%016llx ", (u64)self->ip);
+ return repsep_fprintf(fp, "%*llx", width, (u64)self->ip);
}
static struct sort_entry sort_dso = {
- .header = "Shared Object ",
+ .header = "Shared Object",
.cmp = sort__dso_cmp,
.print = sort__dso_print,
+ .width = &dsos__col_width,
};
/* --sort symbol */
@@ -600,18 +695,23 @@
}
static size_t
-sort__sym_print(FILE *fp, struct hist_entry *self)
+sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used)
{
size_t ret = 0;
if (verbose)
- ret += fprintf(fp, "%#018llx ", (u64)self->ip);
+ ret += repsep_fprintf(fp, "%#018llx %c ", (u64)self->ip,
+ dso__symtab_origin(self->dso));
+ ret += repsep_fprintf(fp, "[%c] ", self->level);
if (self->sym) {
- ret += fprintf(fp, "[%c] %s",
- self->dso == kernel_dso ? 'k' : '.', self->sym->name);
+ ret += repsep_fprintf(fp, "%s", self->sym->name);
+
+ if (self->sym->module)
+ ret += repsep_fprintf(fp, "\t[%s]",
+ self->sym->module->name);
} else {
- ret += fprintf(fp, "%#016llx", (u64)self->ip);
+ ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip);
}
return ret;
@@ -638,19 +738,19 @@
}
static size_t
-sort__parent_print(FILE *fp, struct hist_entry *self)
+sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width)
{
- size_t ret = 0;
-
- ret += fprintf(fp, "%-20s", self->parent ? self->parent->name : "[other]");
-
- return ret;
+ return repsep_fprintf(fp, "%-*s", width,
+ self->parent ? self->parent->name : "[other]");
}
+static unsigned int parent_symbol__col_width;
+
static struct sort_entry sort_parent = {
- .header = "Parent symbol ",
+ .header = "Parent symbol",
.cmp = sort__parent_cmp,
.print = sort__parent_print,
+ .width = &parent_symbol__col_width,
};
static int sort__need_collapse = 0;
@@ -674,7 +774,7 @@
static int sort_dimension__add(char *tok)
{
- int i;
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
struct sort_dimension *sd = &sort_dimensions[i];
@@ -744,6 +844,204 @@
return cmp;
}
+static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask)
+{
+ int i;
+ size_t ret = 0;
+
+ ret += fprintf(fp, "%s", " ");
+
+ for (i = 0; i < depth; i++)
+ if (depth_mask & (1 << i))
+ ret += fprintf(fp, "| ");
+ else
+ ret += fprintf(fp, " ");
+
+ ret += fprintf(fp, "\n");
+
+ return ret;
+}
+static size_t
+ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain, int depth,
+ int depth_mask, int count, u64 total_samples,
+ int hits)
+{
+ int i;
+ size_t ret = 0;
+
+ ret += fprintf(fp, "%s", " ");
+ for (i = 0; i < depth; i++) {
+ if (depth_mask & (1 << i))
+ ret += fprintf(fp, "|");
+ else
+ ret += fprintf(fp, " ");
+ if (!count && i == depth - 1) {
+ double percent;
+
+ percent = hits * 100.0 / total_samples;
+ ret += percent_color_fprintf(fp, "--%2.2f%%-- ", percent);
+ } else
+ ret += fprintf(fp, "%s", " ");
+ }
+ if (chain->sym)
+ ret += fprintf(fp, "%s\n", chain->sym->name);
+ else
+ ret += fprintf(fp, "%p\n", (void *)(long)chain->ip);
+
+ return ret;
+}
+
+static struct symbol *rem_sq_bracket;
+static struct callchain_list rem_hits;
+
+static void init_rem_hits(void)
+{
+ rem_sq_bracket = malloc(sizeof(*rem_sq_bracket) + 6);
+ if (!rem_sq_bracket) {
+ fprintf(stderr, "Not enough memory to display remaining hits\n");
+ return;
+ }
+
+ strcpy(rem_sq_bracket->name, "[...]");
+ rem_hits.sym = rem_sq_bracket;
+}
+
+static size_t
+callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
+ u64 total_samples, int depth, int depth_mask)
+{
+ struct rb_node *node, *next;
+ struct callchain_node *child;
+ struct callchain_list *chain;
+ int new_depth_mask = depth_mask;
+ u64 new_total;
+ u64 remaining;
+ size_t ret = 0;
+ int i;
+
+ if (callchain_param.mode == CHAIN_GRAPH_REL)
+ new_total = self->children_hit;
+ else
+ new_total = total_samples;
+
+ remaining = new_total;
+
+ node = rb_first(&self->rb_root);
+ while (node) {
+ u64 cumul;
+
+ child = rb_entry(node, struct callchain_node, rb_node);
+ cumul = cumul_hits(child);
+ remaining -= cumul;
+
+ /*
+ * The depth mask manages the output of pipes that show
+ * the depth. We don't want to keep the pipes of the current
+ * level for the last child of this depth.
+ * Except if we have remaining filtered hits. They will
+ * supersede the last child
+ */
+ next = rb_next(node);
+ if (!next && (callchain_param.mode != CHAIN_GRAPH_REL || !remaining))
+ new_depth_mask &= ~(1 << (depth - 1));
+
+ /*
+ * But we keep the older depth mask for the line seperator
+ * to keep the level link until we reach the last child
+ */
+ ret += ipchain__fprintf_graph_line(fp, depth, depth_mask);
+ i = 0;
+ list_for_each_entry(chain, &child->val, list) {
+ if (chain->ip >= PERF_CONTEXT_MAX)
+ continue;
+ ret += ipchain__fprintf_graph(fp, chain, depth,
+ new_depth_mask, i++,
+ new_total,
+ cumul);
+ }
+ ret += callchain__fprintf_graph(fp, child, new_total,
+ depth + 1,
+ new_depth_mask | (1 << depth));
+ node = next;
+ }
+
+ if (callchain_param.mode == CHAIN_GRAPH_REL &&
+ remaining && remaining != new_total) {
+
+ if (!rem_sq_bracket)
+ return ret;
+
+ new_depth_mask &= ~(1 << (depth - 1));
+
+ ret += ipchain__fprintf_graph(fp, &rem_hits, depth,
+ new_depth_mask, 0, new_total,
+ remaining);
+ }
+
+ return ret;
+}
+
+static size_t
+callchain__fprintf_flat(FILE *fp, struct callchain_node *self,
+ u64 total_samples)
+{
+ struct callchain_list *chain;
+ size_t ret = 0;
+
+ if (!self)
+ return 0;
+
+ ret += callchain__fprintf_flat(fp, self->parent, total_samples);
+
+
+ list_for_each_entry(chain, &self->val, list) {
+ if (chain->ip >= PERF_CONTEXT_MAX)
+ continue;
+ if (chain->sym)
+ ret += fprintf(fp, " %s\n", chain->sym->name);
+ else
+ ret += fprintf(fp, " %p\n",
+ (void *)(long)chain->ip);
+ }
+
+ return ret;
+}
+
+static size_t
+hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
+ u64 total_samples)
+{
+ struct rb_node *rb_node;
+ struct callchain_node *chain;
+ size_t ret = 0;
+
+ rb_node = rb_first(&self->sorted_chain);
+ while (rb_node) {
+ double percent;
+
+ chain = rb_entry(rb_node, struct callchain_node, rb_node);
+ percent = chain->hit * 100.0 / total_samples;
+ switch (callchain_param.mode) {
+ case CHAIN_FLAT:
+ ret += percent_color_fprintf(fp, " %6.2f%%\n",
+ percent);
+ ret += callchain__fprintf_flat(fp, chain, total_samples);
+ break;
+ case CHAIN_GRAPH_ABS: /* Falldown */
+ case CHAIN_GRAPH_REL:
+ ret += callchain__fprintf_graph(fp, chain,
+ total_samples, 1, 1);
+ default:
+ break;
+ }
+ ret += fprintf(fp, "\n");
+ rb_node = rb_next(rb_node);
+ }
+
+ return ret;
+}
+
+
static size_t
hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
{
@@ -753,37 +1051,33 @@
if (exclude_other && !self->parent)
return 0;
- if (total_samples) {
- double percent = self->count * 100.0 / total_samples;
- char *color = PERF_COLOR_NORMAL;
+ if (total_samples)
+ ret = percent_color_fprintf(fp,
+ field_sep ? "%.2f" : " %6.2f%%",
+ (self->count * 100.0) / total_samples);
+ else
+ ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count);
- /*
- * We color high-overhead entries in red, mid-overhead
- * entries in green - and keep the low overhead places
- * normal:
- */
- if (percent >= 5.0) {
- color = PERF_COLOR_RED;
- } else {
- if (percent >= 0.5)
- color = PERF_COLOR_GREEN;
- }
-
- ret = color_fprintf(fp, color, " %6.2f%%",
- (self->count * 100.0) / total_samples);
- } else
- ret = fprintf(fp, "%12Ld ", self->count);
+ if (show_nr_samples) {
+ if (field_sep)
+ fprintf(fp, "%c%lld", *field_sep, self->count);
+ else
+ fprintf(fp, "%11lld", self->count);
+ }
list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (exclude_other && (se == &sort_parent))
+ if (se->elide)
continue;
- fprintf(fp, " ");
- ret += se->print(fp, self);
+ fprintf(fp, "%s", field_sep ?: " ");
+ ret += se->print(fp, self, se->width ? *se->width : 0);
}
ret += fprintf(fp, "\n");
+ if (callchain)
+ hist_entry_callchain__fprintf(fp, self, total_samples);
+
return ret;
}
@@ -791,13 +1085,25 @@
*
*/
+static void dso__calc_col_width(struct dso *self)
+{
+ if (!col_width_list_str && !field_sep &&
+ (!dso_list || strlist__has_entry(dso_list, self->name))) {
+ unsigned int slen = strlen(self->name);
+ if (slen > dsos__col_width)
+ dsos__col_width = slen;
+ }
+
+ self->slen_calculated = 1;
+}
+
static struct symbol *
resolve_symbol(struct thread *thread, struct map **mapp,
struct dso **dsop, u64 *ipp)
{
struct dso *dso = dsop ? *dsop : NULL;
struct map *map = mapp ? *mapp : NULL;
- uint64_t ip = *ipp;
+ u64 ip = *ipp;
if (!thread)
return NULL;
@@ -810,11 +1116,18 @@
map = thread__find_map(thread, ip);
if (map != NULL) {
+ /*
+ * We have to do this here as we may have a dso
+ * with no symbol hit that has a name longer than
+ * the ones with symbols sampled.
+ */
+ if (!sort_dso.elide && !map->dso->slen_calculated)
+ dso__calc_col_width(map->dso);
+
if (mapp)
*mapp = map;
got_map:
ip = map->map_ip(map, ip);
- *ipp = ip;
dso = map->dso;
} else {
@@ -828,6 +1141,8 @@
dso = kernel_dso;
}
dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+ dprintf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
+ *ipp = ip;
if (dsop)
*dsop = dso;
@@ -846,6 +1161,58 @@
return 0;
}
+static struct symbol **
+resolve_callchain(struct thread *thread, struct map *map __used,
+ struct ip_callchain *chain, struct hist_entry *entry)
+{
+ u64 context = PERF_CONTEXT_MAX;
+ struct symbol **syms = NULL;
+ unsigned int i;
+
+ if (callchain) {
+ syms = calloc(chain->nr, sizeof(*syms));
+ if (!syms) {
+ fprintf(stderr, "Can't allocate memory for symbols\n");
+ exit(-1);
+ }
+ }
+
+ for (i = 0; i < chain->nr; i++) {
+ u64 ip = chain->ips[i];
+ struct dso *dso = NULL;
+ struct symbol *sym;
+
+ if (ip >= PERF_CONTEXT_MAX) {
+ context = ip;
+ continue;
+ }
+
+ switch (context) {
+ case PERF_CONTEXT_HV:
+ dso = hypervisor_dso;
+ break;
+ case PERF_CONTEXT_KERNEL:
+ dso = kernel_dso;
+ break;
+ default:
+ break;
+ }
+
+ sym = resolve_symbol(thread, NULL, &dso, &ip);
+
+ if (sym) {
+ if (sort__has_parent && call__match(sym) &&
+ !entry->parent)
+ entry->parent = sym;
+ if (!callchain)
+ break;
+ syms[i] = sym;
+ }
+ }
+
+ return syms;
+}
+
/*
* collect histogram counts
*/
@@ -858,6 +1225,7 @@
struct rb_node **p = &hist.rb_node;
struct rb_node *parent = NULL;
struct hist_entry *he;
+ struct symbol **syms = NULL;
struct hist_entry entry = {
.thread = thread,
.map = map,
@@ -867,39 +1235,12 @@
.level = level,
.count = count,
.parent = NULL,
+ .sorted_chain = RB_ROOT
};
int cmp;
- if (sort__has_parent && chain) {
- u64 context = PERF_CONTEXT_MAX;
- int i;
-
- for (i = 0; i < chain->nr; i++) {
- u64 ip = chain->ips[i];
- struct dso *dso = NULL;
- struct symbol *sym;
-
- if (ip >= PERF_CONTEXT_MAX) {
- context = ip;
- continue;
- }
-
- switch (context) {
- case PERF_CONTEXT_KERNEL:
- dso = kernel_dso;
- break;
- default:
- break;
- }
-
- sym = resolve_symbol(thread, NULL, &dso, &ip);
-
- if (sym && call__match(sym)) {
- entry.parent = sym;
- break;
- }
- }
- }
+ if ((sort__has_parent || callchain) && chain)
+ syms = resolve_callchain(thread, map, chain, &entry);
while (*p != NULL) {
parent = *p;
@@ -909,6 +1250,10 @@
if (!cmp) {
he->count += count;
+ if (callchain) {
+ append_chain(&he->callchain, chain, syms);
+ free(syms);
+ }
return 0;
}
@@ -922,6 +1267,11 @@
if (!he)
return -ENOMEM;
*he = entry;
+ if (callchain) {
+ callchain_init(&he->callchain);
+ append_chain(&he->callchain, chain, syms);
+ free(syms);
+ }
rb_link_node(&he->rb_node, parent, p);
rb_insert_color(&he->rb_node, &hist);
@@ -992,12 +1342,16 @@
static struct rb_root output_hists;
-static void output__insert_entry(struct hist_entry *he)
+static void output__insert_entry(struct hist_entry *he, u64 min_callchain_hits)
{
struct rb_node **p = &output_hists.rb_node;
struct rb_node *parent = NULL;
struct hist_entry *iter;
+ if (callchain)
+ callchain_param.sort(&he->sorted_chain, &he->callchain,
+ min_callchain_hits, &callchain_param);
+
while (*p != NULL) {
parent = *p;
iter = rb_entry(parent, struct hist_entry, rb_node);
@@ -1012,11 +1366,14 @@
rb_insert_color(&he->rb_node, &output_hists);
}
-static void output__resort(void)
+static void output__resort(u64 total_samples)
{
struct rb_node *next;
struct hist_entry *n;
struct rb_root *tree = &hist;
+ u64 min_callchain_hits;
+
+ min_callchain_hits = total_samples * (callchain_param.min_percent / 100);
if (sort__need_collapse)
tree = &collapse_hists;
@@ -1028,7 +1385,7 @@
next = rb_next(&n->rb_node);
rb_erase(&n->rb_node, tree);
- output__insert_entry(n);
+ output__insert_entry(n, min_callchain_hits);
}
}
@@ -1038,35 +1395,69 @@
struct sort_entry *se;
struct rb_node *nd;
size_t ret = 0;
+ unsigned int width;
+ char *col_width = col_width_list_str;
- fprintf(fp, "\n");
- fprintf(fp, "#\n");
- fprintf(fp, "# (%Ld samples)\n", (u64)total_samples);
+ init_rem_hits();
+
+ fprintf(fp, "# Samples: %Ld\n", (u64)total_samples);
fprintf(fp, "#\n");
fprintf(fp, "# Overhead");
+ if (show_nr_samples) {
+ if (field_sep)
+ fprintf(fp, "%cSamples", *field_sep);
+ else
+ fputs(" Samples ", fp);
+ }
list_for_each_entry(se, &hist_entry__sort_list, list) {
- if (exclude_other && (se == &sort_parent))
+ if (se->elide)
continue;
- fprintf(fp, " %s", se->header);
+ if (field_sep) {
+ fprintf(fp, "%c%s", *field_sep, se->header);
+ continue;
+ }
+ width = strlen(se->header);
+ if (se->width) {
+ if (col_width_list_str) {
+ if (col_width) {
+ *se->width = atoi(col_width);
+ col_width = strchr(col_width, ',');
+ if (col_width)
+ ++col_width;
+ }
+ }
+ width = *se->width = max(*se->width, width);
+ }
+ fprintf(fp, " %*s", width, se->header);
}
fprintf(fp, "\n");
- fprintf(fp, "# ........");
- list_for_each_entry(se, &hist_entry__sort_list, list) {
- int i;
+ if (field_sep)
+ goto print_entries;
- if (exclude_other && (se == &sort_parent))
+ fprintf(fp, "# ........");
+ if (show_nr_samples)
+ fprintf(fp, " ..........");
+ list_for_each_entry(se, &hist_entry__sort_list, list) {
+ unsigned int i;
+
+ if (se->elide)
continue;
fprintf(fp, " ");
- for (i = 0; i < strlen(se->header); i++)
+ if (se->width)
+ width = *se->width;
+ else
+ width = strlen(se->header);
+ for (i = 0; i < width; i++)
fprintf(fp, ".");
}
fprintf(fp, "\n");
fprintf(fp, "#\n");
+print_entries:
for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) {
pos = rb_entry(nd, struct hist_entry, rb_node);
ret += hist_entry__fprintf(fp, pos, total_samples);
@@ -1075,11 +1466,13 @@
if (sort_order == default_sort_order &&
parent_pattern == default_parent_pattern) {
fprintf(fp, "#\n");
- fprintf(fp, "# (For more details, try: perf report --sort comm,dso,symbol)\n");
+ fprintf(fp, "# (For a higher level overview, try: perf report --sort comm,dso)\n");
fprintf(fp, "#\n");
}
fprintf(fp, "\n");
+ free(rem_sq_bracket);
+
return ret;
}
@@ -1115,7 +1508,7 @@
}
static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
{
char level;
int show = 0;
@@ -1126,22 +1519,23 @@
struct map *map = NULL;
void *more_data = event->ip.__more_data;
struct ip_callchain *chain = NULL;
+ int cpumode;
- if (event->header.type & PERF_SAMPLE_PERIOD) {
+ if (sample_type & PERF_SAMPLE_PERIOD) {
period = *(u64 *)more_data;
more_data += sizeof(u64);
}
- dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n",
+ dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->header.misc,
- event->ip.pid,
+ event->ip.pid, event->ip.tid,
(void *)(long)ip,
(long long)period);
- if (event->header.type & PERF_SAMPLE_CALLCHAIN) {
- int i;
+ if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+ unsigned int i;
chain = (void *)more_data;
@@ -1166,7 +1560,12 @@
return -1;
}
- if (event->header.misc & PERF_EVENT_MISC_KERNEL) {
+ if (comm_list && !strlist__has_entry(comm_list, thread->comm))
+ return 0;
+
+ cpumode = event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK;
+
+ if (cpumode == PERF_EVENT_MISC_KERNEL) {
show = SHOW_KERNEL;
level = 'k';
@@ -1174,7 +1573,7 @@
dprintf(" ...... dso: %s\n", dso->name);
- } else if (event->header.misc & PERF_EVENT_MISC_USER) {
+ } else if (cpumode == PERF_EVENT_MISC_USER) {
show = SHOW_USER;
level = '.';
@@ -1182,12 +1581,22 @@
} else {
show = SHOW_HV;
level = 'H';
+
+ dso = hypervisor_dso;
+
dprintf(" ...... dso: [hypervisor]\n");
}
if (show & show_mask) {
struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
+ if (dso_list && (!dso || !dso->name ||
+ !strlist__has_entry(dso_list, dso->name)))
+ return 0;
+
+ if (sym_list && (!sym || !strlist__has_entry(sym_list, sym->name)))
+ return 0;
+
if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
eprintf("problem incrementing symbol count, skipping event\n");
return -1;
@@ -1204,10 +1613,11 @@
struct thread *thread = threads__findnew(event->mmap.pid);
struct map *map = map__new(&event->mmap);
- dprintf("%p [%p]: PERF_EVENT_MMAP %d: [%p(%p) @ %p]: %s\n",
+ dprintf("%p [%p]: PERF_EVENT_MMAP %d/%d: [%p(%p) @ %p]: %s\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
event->mmap.pid,
+ event->mmap.tid,
(void *)(long)event->mmap.start,
(void *)(long)event->mmap.len,
(void *)(long)event->mmap.pgoff,
@@ -1245,15 +1655,27 @@
}
static int
-process_fork_event(event_t *event, unsigned long offset, unsigned long head)
+process_task_event(event_t *event, unsigned long offset, unsigned long head)
{
struct thread *thread = threads__findnew(event->fork.pid);
struct thread *parent = threads__findnew(event->fork.ppid);
- dprintf("%p [%p]: PERF_EVENT_FORK: %d:%d\n",
+ dprintf("%p [%p]: PERF_EVENT_%s: (%d:%d):(%d:%d)\n",
(void *)(offset + head),
(void *)(long)(event->header.size),
- event->fork.pid, event->fork.ppid);
+ event->header.type == PERF_EVENT_FORK ? "FORK" : "EXIT",
+ event->fork.pid, event->fork.tid,
+ event->fork.ppid, event->fork.ptid);
+
+ /*
+ * A thread clone will have the same PID for both
+ * parent and child.
+ */
+ if (thread == parent)
+ return 0;
+
+ if (event->header.type == PERF_EVENT_EXIT)
+ return 0;
if (!thread || !parent || thread__fork(thread, parent)) {
dprintf("problem processing PERF_EVENT_FORK, skipping event.\n");
@@ -1265,19 +1687,6 @@
}
static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
- dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
- (void *)(offset + head),
- (void *)(long)(event->header.size),
- event->period.time,
- event->period.id,
- event->period.sample_period);
-
- return 0;
-}
-
-static int
process_lost_event(event_t *event, unsigned long offset, unsigned long head)
{
dprintf("%p [%p]: PERF_EVENT_LOST: id:%Ld: lost:%Ld\n",
@@ -1327,15 +1736,51 @@
dprintf(".\n");
}
+static struct perf_header *header;
+
+static struct perf_counter_attr *perf_header__find_attr(u64 id)
+{
+ int i;
+
+ for (i = 0; i < header->attrs; i++) {
+ struct perf_header_attr *attr = header->attr[i];
+ int j;
+
+ for (j = 0; j < attr->ids; j++) {
+ if (attr->id[j] == id)
+ return &attr->attr;
+ }
+ }
+
+ return NULL;
+}
+
+static int
+process_read_event(event_t *event, unsigned long offset, unsigned long head)
+{
+ struct perf_counter_attr *attr = perf_header__find_attr(event->read.id);
+
+ dprintf("%p [%p]: PERF_EVENT_READ: %d %d %s %Lu\n",
+ (void *)(offset + head),
+ (void *)(long)(event->header.size),
+ event->read.pid,
+ event->read.tid,
+ attr ? __event_name(attr->type, attr->config)
+ : "FAIL",
+ event->read.value);
+
+ return 0;
+}
+
static int
process_event(event_t *event, unsigned long offset, unsigned long head)
{
trace_event(event);
- if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
- return process_overflow_event(event, offset, head);
-
switch (event->header.type) {
+ case PERF_EVENT_SAMPLE:
+ return process_sample_event(event, offset, head);
+
case PERF_EVENT_MMAP:
return process_mmap_event(event, offset, head);
@@ -1343,14 +1788,15 @@
return process_comm_event(event, offset, head);
case PERF_EVENT_FORK:
- return process_fork_event(event, offset, head);
-
- case PERF_EVENT_PERIOD:
- return process_period_event(event, offset, head);
+ case PERF_EVENT_EXIT:
+ return process_task_event(event, offset, head);
case PERF_EVENT_LOST:
return process_lost_event(event, offset, head);
+ case PERF_EVENT_READ:
+ return process_read_event(event, offset, head);
+
/*
* We dont process them right now but they are fine:
*/
@@ -1366,13 +1812,28 @@
return 0;
}
-static struct perf_file_header file_header;
+static u64 perf_header__sample_type(void)
+{
+ u64 sample_type = 0;
+ int i;
+
+ for (i = 0; i < header->attrs; i++) {
+ struct perf_header_attr *attr = header->attr[i];
+
+ if (!sample_type)
+ sample_type = attr->attr.sample_type;
+ else if (sample_type != attr->attr.sample_type)
+ die("non matching sample_type");
+ }
+
+ return sample_type;
+}
static int __cmd_report(void)
{
int ret, rc = EXIT_FAILURE;
unsigned long offset = 0;
- unsigned long head = sizeof(file_header);
+ unsigned long head, shift;
struct stat stat;
event_t *event;
uint32_t size;
@@ -1400,15 +1861,31 @@
exit(0);
}
- if (read(input, &file_header, sizeof(file_header)) == -1) {
- perror("failed to read file headers");
- exit(-1);
- }
+ header = perf_header__read(input);
+ head = header->data_offset;
- if (sort__has_parent &&
- !(file_header.sample_type & PERF_SAMPLE_CALLCHAIN)) {
- fprintf(stderr, "selected --sort parent, but no callchain data\n");
- exit(-1);
+ sample_type = perf_header__sample_type();
+
+ if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) {
+ if (sort__has_parent) {
+ fprintf(stderr, "selected --sort parent, but no"
+ " callchain data. Did you call"
+ " perf record without -g?\n");
+ exit(-1);
+ }
+ if (callchain) {
+ fprintf(stderr, "selected -c but no callchain data."
+ " Did you call perf record without"
+ " -g?\n");
+ exit(-1);
+ }
+ } else if (callchain_param.mode != CHAIN_NONE && !callchain) {
+ callchain = 1;
+ if (register_callchain_param(&callchain_param) < 0) {
+ fprintf(stderr, "Can't register callchain"
+ " params\n");
+ exit(-1);
+ }
}
if (load_kernel() < 0) {
@@ -1426,6 +1903,11 @@
cwd = NULL;
cwdlen = 0;
}
+
+ shift = page_size * (head / page_size);
+ offset += shift;
+ head -= shift;
+
remap:
buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
MAP_SHARED, input, offset);
@@ -1442,9 +1924,10 @@
size = 8;
if (head + event->header.size >= page_size * mmap_window) {
- unsigned long shift = page_size * (head / page_size);
int ret;
+ shift = page_size * (head / page_size);
+
ret = munmap(buf, page_size * mmap_window);
assert(ret == 0);
@@ -1482,10 +1965,10 @@
head += size;
- if (offset + head >= sizeof(file_header) + file_header.data_size)
+ if (offset + head >= header->data_offset + header->data_size)
goto done;
- if (offset + head < stat.st_size)
+ if (offset + head < (unsigned long)stat.st_size)
goto more;
done:
@@ -1509,12 +1992,65 @@
dsos__fprintf(stdout);
collapse__resort();
- output__resort();
+ output__resort(total);
output__fprintf(stdout, total);
return rc;
}
+static int
+parse_callchain_opt(const struct option *opt __used, const char *arg,
+ int unset __used)
+{
+ char *tok;
+ char *endptr;
+
+ callchain = 1;
+
+ if (!arg)
+ return 0;
+
+ tok = strtok((char *)arg, ",");
+ if (!tok)
+ return -1;
+
+ /* get the output mode */
+ if (!strncmp(tok, "graph", strlen(arg)))
+ callchain_param.mode = CHAIN_GRAPH_ABS;
+
+ else if (!strncmp(tok, "flat", strlen(arg)))
+ callchain_param.mode = CHAIN_FLAT;
+
+ else if (!strncmp(tok, "fractal", strlen(arg)))
+ callchain_param.mode = CHAIN_GRAPH_REL;
+
+ else if (!strncmp(tok, "none", strlen(arg))) {
+ callchain_param.mode = CHAIN_NONE;
+ callchain = 0;
+
+ return 0;
+ }
+
+ else
+ return -1;
+
+ /* get the min percentage */
+ tok = strtok(NULL, ",");
+ if (!tok)
+ goto setup;
+
+ callchain_param.min_percent = strtod(tok, &endptr);
+ if (tok == endptr)
+ return -1;
+
+setup:
+ if (register_callchain_param(&callchain_param) < 0) {
+ fprintf(stderr, "Can't register callchain params\n");
+ return -1;
+ }
+ return 0;
+}
+
static const char * const report_usage[] = {
"perf report [<options>] <command>",
NULL
@@ -1528,6 +2064,10 @@
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
+ OPT_BOOLEAN('m', "modules", &modules,
+ "load module symbols - WARNING: use only with -k and LIVE kernel"),
+ OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
+ "Show a column with the number of samples"),
OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
"sort by key(s): pid, comm, dso, symbol, parent"),
OPT_BOOLEAN('P', "full-paths", &full_paths,
@@ -1536,6 +2076,21 @@
"regex filter to identify parent, see: '--sort parent'"),
OPT_BOOLEAN('x', "exclude-other", &exclude_other,
"Only display entries with parent-match"),
+ OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent",
+ "Display callchains using output_type and min percent threshold. "
+ "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt),
+ OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]",
+ "only consider symbols in these dsos"),
+ OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]",
+ "only consider symbols in these comms"),
+ OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]",
+ "only consider these symbols"),
+ OPT_STRING('w', "column-widths", &col_width_list_str,
+ "width[,width...]",
+ "don't try to adjust column width, use these fixed values"),
+ OPT_STRING('t', "field-separator", &field_sep, "separator",
+ "separator for columns, no spaces will be added between "
+ "columns '.' is reserved."),
OPT_END()
};
@@ -1554,7 +2109,26 @@
free(str);
}
-int cmd_report(int argc, const char **argv, const char *prefix)
+static void setup_list(struct strlist **list, const char *list_str,
+ struct sort_entry *se, const char *list_name,
+ FILE *fp)
+{
+ if (list_str) {
+ *list = strlist__new(true, list_str);
+ if (!*list) {
+ fprintf(stderr, "problems parsing %s list\n",
+ list_name);
+ exit(129);
+ }
+ if (strlist__nr_entries(*list) == 1) {
+ fprintf(fp, "# %s: %s\n", list_name,
+ strlist__entry(*list, 0)->s);
+ se->elide = true;
+ }
+ }
+}
+
+int cmd_report(int argc, const char **argv, const char *prefix __used)
{
symbol__init();
@@ -1564,9 +2138,10 @@
setup_sorting();
- if (parent_pattern != default_parent_pattern)
+ if (parent_pattern != default_parent_pattern) {
sort_dimension__add("parent");
- else
+ sort_parent.elide = 1;
+ } else
exclude_other = 0;
/*
@@ -1577,5 +2152,15 @@
setup_pager();
+ setup_list(&dso_list, dso_list_str, &sort_dso, "dso", stdout);
+ setup_list(&comm_list, comm_list_str, &sort_comm, "comm", stdout);
+ setup_list(&sym_list, sym_list_str, &sort_sym, "symbol", stdout);
+
+ if (field_sep && *field_sep == '.') {
+ fputs("'.' is the only non valid --field-separator argument\n",
+ stderr);
+ exit(129);
+ }
+
return __cmd_report();
}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 6d3eeac..b4b06c7 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -32,6 +32,7 @@
* Wu Fengguang <fengguang.wu@intel.com>
* Mike Galbraith <efault@gmx.de>
* Paul Mackerras <paulus@samba.org>
+ * Jaswinder Singh Rajput <jaswinder@kernel.org>
*
* Released under the GPL v2. (and only v2, not any later version)
*/
@@ -45,7 +46,7 @@
#include <sys/prctl.h>
#include <math.h>
-static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
+static struct perf_counter_attr default_attrs[] = {
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
@@ -59,42 +60,28 @@
};
+#define MAX_RUN 100
+
static int system_wide = 0;
-static int inherit = 1;
static int verbose = 0;
+static unsigned int nr_cpus = 0;
+static int run_idx = 0;
+
+static int run_count = 1;
+static int inherit = 1;
+static int scale = 1;
+static int target_pid = -1;
+static int null_run = 0;
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
-static int target_pid = -1;
-static int nr_cpus = 0;
-static unsigned int page_size;
-
-static int scale = 1;
-
-static const unsigned int default_count[] = {
- 1000000,
- 1000000,
- 10000,
- 10000,
- 1000000,
- 10000,
-};
-
-#define MAX_RUN 100
-
-static int run_count = 1;
-static int run_idx = 0;
-
-static u64 event_res[MAX_RUN][MAX_COUNTERS][3];
-static u64 event_scaled[MAX_RUN][MAX_COUNTERS];
-
-//static u64 event_hist[MAX_RUN][MAX_COUNTERS][3];
-
-
static u64 runtime_nsecs[MAX_RUN];
static u64 walltime_nsecs[MAX_RUN];
static u64 runtime_cycles[MAX_RUN];
+static u64 event_res[MAX_RUN][MAX_COUNTERS][3];
+static u64 event_scaled[MAX_RUN][MAX_COUNTERS];
+
static u64 event_res_avg[MAX_COUNTERS][3];
static u64 event_res_noise[MAX_COUNTERS][3];
@@ -109,7 +96,14 @@
static u64 runtime_cycles_avg;
static u64 runtime_cycles_noise;
-static void create_perf_stat_counter(int counter)
+#define MATCH_EVENT(t, c, counter) \
+ (attrs[counter].type == PERF_TYPE_##t && \
+ attrs[counter].config == PERF_COUNT_##c)
+
+#define ERR_PERF_OPEN \
+"Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n"
+
+static void create_perf_stat_counter(int counter, int pid)
{
struct perf_counter_attr *attr = attrs + counter;
@@ -118,21 +112,23 @@
PERF_FORMAT_TOTAL_TIME_RUNNING;
if (system_wide) {
- int cpu;
- for (cpu = 0; cpu < nr_cpus; cpu ++) {
+ unsigned int cpu;
+
+ for (cpu = 0; cpu < nr_cpus; cpu++) {
fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0);
- if (fd[cpu][counter] < 0 && verbose) {
- printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno));
- }
+ if (fd[cpu][counter] < 0 && verbose)
+ fprintf(stderr, ERR_PERF_OPEN, counter,
+ fd[cpu][counter], strerror(errno));
}
} else {
- attr->inherit = inherit;
- attr->disabled = 1;
+ attr->inherit = inherit;
+ attr->disabled = 1;
+ attr->enable_on_exec = 1;
- fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0);
- if (fd[0][counter] < 0 && verbose) {
- printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno));
- }
+ fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0);
+ if (fd[0][counter] < 0 && verbose)
+ fprintf(stderr, ERR_PERF_OPEN, counter,
+ fd[0][counter], strerror(errno));
}
}
@@ -141,13 +137,8 @@
*/
static inline int nsec_counter(int counter)
{
- if (attrs[counter].type != PERF_TYPE_SOFTWARE)
- return 0;
-
- if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK)
- return 1;
-
- if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+ if (MATCH_EVENT(SOFTWARE, SW_CPU_CLOCK, counter) ||
+ MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
return 1;
return 0;
@@ -159,8 +150,8 @@
static void read_counter(int counter)
{
u64 *count, single_count[3];
- ssize_t res;
- int cpu, nv;
+ unsigned int cpu;
+ size_t res, nv;
int scaled;
count = event_res[run_idx][counter];
@@ -168,12 +159,13 @@
count[0] = count[1] = count[2] = 0;
nv = scale ? 3 : 1;
- for (cpu = 0; cpu < nr_cpus; cpu ++) {
+ for (cpu = 0; cpu < nr_cpus; cpu++) {
if (fd[cpu][counter] < 0)
continue;
res = read(fd[cpu][counter], single_count, nv * sizeof(u64));
assert(res == nv * sizeof(u64));
+
close(fd[cpu][counter]);
fd[cpu][counter] = -1;
@@ -201,46 +193,81 @@
/*
* Save the full runtime - to allow normalization during printout:
*/
- if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
- attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
+ if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
runtime_nsecs[run_idx] = count[0];
- if (attrs[counter].type == PERF_TYPE_HARDWARE &&
- attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES)
+ if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
runtime_cycles[run_idx] = count[0];
}
-static int run_perf_stat(int argc, const char **argv)
+static int run_perf_stat(int argc __used, const char **argv)
{
unsigned long long t0, t1;
int status = 0;
int counter;
int pid;
+ int child_ready_pipe[2], go_pipe[2];
+ char buf;
if (!system_wide)
nr_cpus = 1;
- for (counter = 0; counter < nr_counters; counter++)
- create_perf_stat_counter(counter);
-
- /*
- * Enable counters and exec the command:
- */
- t0 = rdclock();
- prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+ if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) {
+ perror("failed to create pipes");
+ exit(1);
+ }
if ((pid = fork()) < 0)
perror("failed to fork");
if (!pid) {
- if (execvp(argv[0], (char **)argv)) {
- perror(argv[0]);
- exit(-1);
- }
+ close(child_ready_pipe[0]);
+ close(go_pipe[1]);
+ fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC);
+
+ /*
+ * Do a dummy execvp to get the PLT entry resolved,
+ * so we avoid the resolver overhead on the real
+ * execvp call.
+ */
+ execvp("", (char **)argv);
+
+ /*
+ * Tell the parent we're ready to go
+ */
+ close(child_ready_pipe[1]);
+
+ /*
+ * Wait until the parent tells us to go.
+ */
+ if (read(go_pipe[0], &buf, 1) == -1)
+ perror("unable to read pipe");
+
+ execvp(argv[0], (char **)argv);
+
+ perror(argv[0]);
+ exit(-1);
}
+ /*
+ * Wait for the child to be ready to exec.
+ */
+ close(child_ready_pipe[1]);
+ close(go_pipe[0]);
+ if (read(child_ready_pipe[0], &buf, 1) == -1)
+ perror("unable to read pipe");
+ close(child_ready_pipe[0]);
+
+ for (counter = 0; counter < nr_counters; counter++)
+ create_perf_stat_counter(counter, pid);
+
+ /*
+ * Enable counters and exec the command:
+ */
+ t0 = rdclock();
+
+ close(go_pipe[1]);
wait(&status);
- prctl(PR_TASK_PERF_COUNTERS_DISABLE);
t1 = rdclock();
walltime_nsecs[run_idx] = t1 - t0;
@@ -262,11 +289,9 @@
{
double msecs = (double)count[0] / 1000000;
- fprintf(stderr, " %14.6f %-20s", msecs, event_name(counter));
+ fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter));
- if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
- attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
-
+ if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
if (walltime_nsecs_avg)
fprintf(stderr, " # %10.3f CPUs ",
(double)count[0] / (double)walltime_nsecs_avg);
@@ -276,12 +301,10 @@
static void abs_printout(int counter, u64 *count, u64 *noise)
{
- fprintf(stderr, " %14Ld %-20s", count[0], event_name(counter));
+ fprintf(stderr, " %14Ld %-24s", count[0], event_name(counter));
if (runtime_cycles_avg &&
- attrs[counter].type == PERF_TYPE_HARDWARE &&
- attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
-
+ MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
fprintf(stderr, " # %10.3f IPC ",
(double)count[0] / (double)runtime_cycles_avg);
} else {
@@ -306,7 +329,7 @@
scaled = event_scaled_avg[counter];
if (scaled == -1) {
- fprintf(stderr, " %14s %-20s\n",
+ fprintf(stderr, " %14s %-24s\n",
"<not counted>", event_name(counter));
return;
}
@@ -364,8 +387,11 @@
event_res_avg[j]+1, event_res[i][j]+1);
update_avg("counter/2", j,
event_res_avg[j]+2, event_res[i][j]+2);
- update_avg("scaled", j,
- event_scaled_avg + j, event_scaled[i]+j);
+ if (event_scaled[i][j] != (u64)-1)
+ update_avg("scaled", j,
+ event_scaled_avg + j, event_scaled[i]+j);
+ else
+ event_scaled_avg[j] = -1;
}
}
runtime_nsecs_avg /= run_count;
@@ -429,11 +455,14 @@
for (counter = 0; counter < nr_counters; counter++)
print_counter(counter);
-
fprintf(stderr, "\n");
- fprintf(stderr, " %14.9f seconds time elapsed.\n",
+ fprintf(stderr, " %14.9f seconds time elapsed",
(double)walltime_nsecs_avg/1e9);
- fprintf(stderr, "\n");
+ if (run_count > 1) {
+ fprintf(stderr, " ( +- %7.3f%% )",
+ 100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg);
+ }
+ fprintf(stderr, "\n\n");
}
static volatile int signr = -1;
@@ -466,36 +495,38 @@
OPT_INTEGER('p', "pid", &target_pid,
"stat events on existing pid"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
- "system-wide collection from all CPUs"),
- OPT_BOOLEAN('S', "scale", &scale,
- "scale/normalize counters"),
+ "system-wide collection from all CPUs"),
+ OPT_BOOLEAN('c', "scale", &scale,
+ "scale/normalize counters"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
OPT_INTEGER('r', "repeat", &run_count,
"repeat command and print average + stddev (max: 100)"),
+ OPT_BOOLEAN('n', "null", &null_run,
+ "null run - dont start any counters"),
OPT_END()
};
-int cmd_stat(int argc, const char **argv, const char *prefix)
+int cmd_stat(int argc, const char **argv, const char *prefix __used)
{
int status;
- page_size = sysconf(_SC_PAGE_SIZE);
-
- memcpy(attrs, default_attrs, sizeof(attrs));
-
- argc = parse_options(argc, argv, options, stat_usage, 0);
+ argc = parse_options(argc, argv, options, stat_usage,
+ PARSE_OPT_STOP_AT_NON_OPTION);
if (!argc)
usage_with_options(stat_usage, options);
if (run_count <= 0 || run_count > MAX_RUN)
usage_with_options(stat_usage, options);
- if (!nr_counters)
- nr_counters = 8;
+ /* Set attrs and nr_counters if no event is selected and !null_run */
+ if (!null_run && !nr_counters) {
+ memcpy(attrs, default_attrs, sizeof(default_attrs));
+ nr_counters = ARRAY_SIZE(default_attrs);
+ }
nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
assert(nr_cpus <= MAX_NR_CPUS);
- assert(nr_cpus >= 0);
+ assert((int)nr_cpus >= 0);
/*
* We dont want to block the signals - that would cause
@@ -511,7 +542,7 @@
status = 0;
for (run_idx = 0; run_idx < run_count; run_idx++) {
if (run_count != 1 && verbose)
- fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx+1);
+ fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
status = run_perf_stat(argc, argv);
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 5352b5e..7de28ce 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -23,7 +23,7 @@
#include "util/symbol.h"
#include "util/color.h"
#include "util/util.h"
-#include "util/rbtree.h"
+#include <linux/rbtree.h>
#include "util/parse-options.h"
#include "util/parse-events.h"
@@ -31,6 +31,8 @@
#include <fcntl.h>
#include <stdio.h>
+#include <termios.h>
+#include <unistd.h>
#include <errno.h>
#include <time.h>
@@ -54,10 +56,11 @@
static int default_interval = 100000;
-static u64 count_filter = 5;
+static int count_filter = 5;
static int print_entries = 15;
static int target_pid = -1;
+static int inherit = 0;
static int profile_cpu = -1;
static int nr_cpus = 0;
static unsigned int realtime_prio = 0;
@@ -66,16 +69,30 @@
static unsigned int mmap_pages = 16;
static int freq = 0;
static int verbose = 0;
-
-static char *sym_filter;
-static unsigned long filter_start;
-static unsigned long filter_end;
+static char *vmlinux = NULL;
static int delay_secs = 2;
static int zero;
static int dump_symtab;
/*
+ * Source
+ */
+
+struct source_line {
+ u64 eip;
+ unsigned long count[MAX_COUNTERS];
+ char *line;
+ struct source_line *next;
+};
+
+static char *sym_filter = NULL;
+struct sym_entry *sym_filter_entry = NULL;
+static int sym_pcnt_filter = 5;
+static int sym_counter = 0;
+static int display_weighted = -1;
+
+/*
* Symbols
*/
@@ -89,9 +106,237 @@
unsigned long snap_count;
double weight;
int skip;
+ struct source_line *source;
+ struct source_line *lines;
+ struct source_line **lines_tail;
+ pthread_mutex_t source_lock;
};
-struct sym_entry *sym_filter_entry;
+/*
+ * Source functions
+ */
+
+static void parse_source(struct sym_entry *syme)
+{
+ struct symbol *sym;
+ struct module *module;
+ struct section *section = NULL;
+ FILE *file;
+ char command[PATH_MAX*2], *path = vmlinux;
+ u64 start, end, len;
+
+ if (!syme)
+ return;
+
+ if (syme->lines) {
+ pthread_mutex_lock(&syme->source_lock);
+ goto out_assign;
+ }
+
+ sym = (struct symbol *)(syme + 1);
+ module = sym->module;
+
+ if (module)
+ path = module->path;
+ if (!path)
+ return;
+
+ start = sym->obj_start;
+ if (!start)
+ start = sym->start;
+
+ if (module) {
+ section = module->sections->find_section(module->sections, ".text");
+ if (section)
+ start -= section->vma;
+ }
+
+ end = start + sym->end - sym->start + 1;
+ len = sym->end - sym->start;
+
+ sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", start, end, path);
+
+ file = popen(command, "r");
+ if (!file)
+ return;
+
+ pthread_mutex_lock(&syme->source_lock);
+ syme->lines_tail = &syme->lines;
+ while (!feof(file)) {
+ struct source_line *src;
+ size_t dummy = 0;
+ char *c;
+
+ src = malloc(sizeof(struct source_line));
+ assert(src != NULL);
+ memset(src, 0, sizeof(struct source_line));
+
+ if (getline(&src->line, &dummy, file) < 0)
+ break;
+ if (!src->line)
+ break;
+
+ c = strchr(src->line, '\n');
+ if (c)
+ *c = 0;
+
+ src->next = NULL;
+ *syme->lines_tail = src;
+ syme->lines_tail = &src->next;
+
+ if (strlen(src->line)>8 && src->line[8] == ':') {
+ src->eip = strtoull(src->line, NULL, 16);
+ if (section)
+ src->eip += section->vma;
+ }
+ if (strlen(src->line)>8 && src->line[16] == ':') {
+ src->eip = strtoull(src->line, NULL, 16);
+ if (section)
+ src->eip += section->vma;
+ }
+ }
+ pclose(file);
+out_assign:
+ sym_filter_entry = syme;
+ pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void __zero_source_counters(struct sym_entry *syme)
+{
+ int i;
+ struct source_line *line;
+
+ line = syme->lines;
+ while (line) {
+ for (i = 0; i < nr_counters; i++)
+ line->count[i] = 0;
+ line = line->next;
+ }
+}
+
+static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
+{
+ struct source_line *line;
+
+ if (syme != sym_filter_entry)
+ return;
+
+ if (pthread_mutex_trylock(&syme->source_lock))
+ return;
+
+ if (!syme->source)
+ goto out_unlock;
+
+ for (line = syme->lines; line; line = line->next) {
+ if (line->eip == ip) {
+ line->count[counter]++;
+ break;
+ }
+ if (line->eip > ip)
+ break;
+ }
+out_unlock:
+ pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void lookup_sym_source(struct sym_entry *syme)
+{
+ struct symbol *symbol = (struct symbol *)(syme + 1);
+ struct source_line *line;
+ char pattern[PATH_MAX];
+ char *idx;
+
+ sprintf(pattern, "<%s>:", symbol->name);
+
+ if (symbol->module) {
+ idx = strstr(pattern, "\t");
+ if (idx)
+ *idx = 0;
+ }
+
+ pthread_mutex_lock(&syme->source_lock);
+ for (line = syme->lines; line; line = line->next) {
+ if (strstr(line->line, pattern)) {
+ syme->source = line;
+ break;
+ }
+ }
+ pthread_mutex_unlock(&syme->source_lock);
+}
+
+static void show_lines(struct source_line *queue, int count, int total)
+{
+ int i;
+ struct source_line *line;
+
+ line = queue;
+ for (i = 0; i < count; i++) {
+ float pcnt = 100.0*(float)line->count[sym_counter]/(float)total;
+
+ printf("%8li %4.1f%%\t%s\n", line->count[sym_counter], pcnt, line->line);
+ line = line->next;
+ }
+}
+
+#define TRACE_COUNT 3
+
+static void show_details(struct sym_entry *syme)
+{
+ struct symbol *symbol;
+ struct source_line *line;
+ struct source_line *line_queue = NULL;
+ int displayed = 0;
+ int line_queue_count = 0, total = 0, more = 0;
+
+ if (!syme)
+ return;
+
+ if (!syme->source)
+ lookup_sym_source(syme);
+
+ if (!syme->source)
+ return;
+
+ symbol = (struct symbol *)(syme + 1);
+ printf("Showing %s for %s\n", event_name(sym_counter), symbol->name);
+ printf(" Events Pcnt (>=%d%%)\n", sym_pcnt_filter);
+
+ pthread_mutex_lock(&syme->source_lock);
+ line = syme->source;
+ while (line) {
+ total += line->count[sym_counter];
+ line = line->next;
+ }
+
+ line = syme->source;
+ while (line) {
+ float pcnt = 0.0;
+
+ if (!line_queue_count)
+ line_queue = line;
+ line_queue_count++;
+
+ if (line->count[sym_counter])
+ pcnt = 100.0 * line->count[sym_counter] / (float)total;
+ if (pcnt >= (float)sym_pcnt_filter) {
+ if (displayed <= print_entries)
+ show_lines(line_queue, line_queue_count, total);
+ else more++;
+ displayed += line_queue_count;
+ line_queue_count = 0;
+ line_queue = NULL;
+ } else if (line_queue_count > TRACE_COUNT) {
+ line_queue = line_queue->next;
+ line_queue_count--;
+ }
+
+ line->count[sym_counter] = zero ? 0 : line->count[sym_counter] * 7 / 8;
+ line = line->next;
+ }
+ pthread_mutex_unlock(&syme->source_lock);
+ if (more)
+ printf("%d lines not displayed, maybe increase display entries [e]\n", more);
+}
struct dso *kernel_dso;
@@ -110,6 +355,9 @@
double weight = sym->snap_count;
int counter;
+ if (!display_weighted)
+ return weight;
+
for (counter = 1; counter < nr_counters-1; counter++)
weight *= sym->count[counter];
@@ -157,7 +405,7 @@
static void print_sym_table(void)
{
int printed = 0, j;
- int counter;
+ int counter, snap = !display_weighted ? sym_counter : 0;
float samples_per_sec = samples/delay_secs;
float ksamples_per_sec = (samples-userspace_samples)/delay_secs;
float sum_ksamples = 0.0;
@@ -173,7 +421,7 @@
pthread_mutex_unlock(&active_symbols_lock);
list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
- syme->snap_count = syme->count[0];
+ syme->snap_count = syme->count[snap];
if (syme->snap_count != 0) {
syme->weight = sym_weight(syme);
rb_insert_active_sym(&tmp, syme);
@@ -193,7 +441,7 @@
samples_per_sec,
100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec)));
- if (nr_counters == 1) {
+ if (nr_counters == 1 || !display_weighted) {
printf("%Ld", (u64)attrs[0].sample_period);
if (freq)
printf("Hz ");
@@ -201,7 +449,9 @@
printf(" ");
}
- for (counter = 0; counter < nr_counters; counter++) {
+ if (!display_weighted)
+ printf("%s", event_name(sym_counter));
+ else for (counter = 0; counter < nr_counters; counter++) {
if (counter)
printf("/");
@@ -226,6 +476,11 @@
printf("------------------------------------------------------------------------------\n\n");
+ if (sym_filter_entry) {
+ show_details(sym_filter_entry);
+ return;
+ }
+
if (nr_counters == 1)
printf(" samples pcnt");
else
@@ -238,59 +493,300 @@
for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
struct sym_entry *syme = rb_entry(nd, struct sym_entry, rb_node);
struct symbol *sym = (struct symbol *)(syme + 1);
- char *color = PERF_COLOR_NORMAL;
double pcnt;
- if (++printed > print_entries || syme->snap_count < count_filter)
+ if (++printed > print_entries || (int)syme->snap_count < count_filter)
continue;
pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) /
sum_ksamples));
- /*
- * We color high-overhead entries in red, mid-overhead
- * entries in green - and keep the low overhead places
- * normal:
- */
- if (pcnt >= 5.0) {
- color = PERF_COLOR_RED;
- } else {
- if (pcnt >= 0.5)
- color = PERF_COLOR_GREEN;
- }
-
- if (nr_counters == 1)
+ if (nr_counters == 1 || !display_weighted)
printf("%20.2f - ", syme->weight);
else
printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
- color_fprintf(stdout, color, "%4.1f%%", pcnt);
- printf(" - %016llx : %s\n", sym->start, sym->name);
+ percent_color_fprintf(stdout, "%4.1f%%", pcnt);
+ printf(" - %016llx : %s", sym->start, sym->name);
+ if (sym->module)
+ printf("\t[%s]", sym->module->name);
+ printf("\n");
}
}
-static void *display_thread(void *arg)
+static void prompt_integer(int *target, const char *msg)
+{
+ char *buf = malloc(0), *p;
+ size_t dummy = 0;
+ int tmp;
+
+ fprintf(stdout, "\n%s: ", msg);
+ if (getline(&buf, &dummy, stdin) < 0)
+ return;
+
+ p = strchr(buf, '\n');
+ if (p)
+ *p = 0;
+
+ p = buf;
+ while(*p) {
+ if (!isdigit(*p))
+ goto out_free;
+ p++;
+ }
+ tmp = strtoul(buf, NULL, 10);
+ *target = tmp;
+out_free:
+ free(buf);
+}
+
+static void prompt_percent(int *target, const char *msg)
+{
+ int tmp = 0;
+
+ prompt_integer(&tmp, msg);
+ if (tmp >= 0 && tmp <= 100)
+ *target = tmp;
+}
+
+static void prompt_symbol(struct sym_entry **target, const char *msg)
+{
+ char *buf = malloc(0), *p;
+ struct sym_entry *syme = *target, *n, *found = NULL;
+ size_t dummy = 0;
+
+ /* zero counters of active symbol */
+ if (syme) {
+ pthread_mutex_lock(&syme->source_lock);
+ __zero_source_counters(syme);
+ *target = NULL;
+ pthread_mutex_unlock(&syme->source_lock);
+ }
+
+ fprintf(stdout, "\n%s: ", msg);
+ if (getline(&buf, &dummy, stdin) < 0)
+ goto out_free;
+
+ p = strchr(buf, '\n');
+ if (p)
+ *p = 0;
+
+ pthread_mutex_lock(&active_symbols_lock);
+ syme = list_entry(active_symbols.next, struct sym_entry, node);
+ pthread_mutex_unlock(&active_symbols_lock);
+
+ list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
+ struct symbol *sym = (struct symbol *)(syme + 1);
+
+ if (!strcmp(buf, sym->name)) {
+ found = syme;
+ break;
+ }
+ }
+
+ if (!found) {
+ fprintf(stderr, "Sorry, %s is not active.\n", sym_filter);
+ sleep(1);
+ return;
+ } else
+ parse_source(found);
+
+out_free:
+ free(buf);
+}
+
+static void print_mapped_keys(void)
+{
+ char *name = NULL;
+
+ if (sym_filter_entry) {
+ struct symbol *sym = (struct symbol *)(sym_filter_entry+1);
+ name = sym->name;
+ }
+
+ fprintf(stdout, "\nMapped keys:\n");
+ fprintf(stdout, "\t[d] display refresh delay. \t(%d)\n", delay_secs);
+ fprintf(stdout, "\t[e] display entries (lines). \t(%d)\n", print_entries);
+
+ if (nr_counters > 1)
+ fprintf(stdout, "\t[E] active event counter. \t(%s)\n", event_name(sym_counter));
+
+ fprintf(stdout, "\t[f] profile display filter (count). \t(%d)\n", count_filter);
+
+ if (vmlinux) {
+ fprintf(stdout, "\t[F] annotate display filter (percent). \t(%d%%)\n", sym_pcnt_filter);
+ fprintf(stdout, "\t[s] annotate symbol. \t(%s)\n", name?: "NULL");
+ fprintf(stdout, "\t[S] stop annotation.\n");
+ }
+
+ if (nr_counters > 1)
+ fprintf(stdout, "\t[w] toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
+
+ fprintf(stdout, "\t[z] toggle sample zeroing. \t(%d)\n", zero ? 1 : 0);
+ fprintf(stdout, "\t[qQ] quit.\n");
+}
+
+static int key_mapped(int c)
+{
+ switch (c) {
+ case 'd':
+ case 'e':
+ case 'f':
+ case 'z':
+ case 'q':
+ case 'Q':
+ return 1;
+ case 'E':
+ case 'w':
+ return nr_counters > 1 ? 1 : 0;
+ case 'F':
+ case 's':
+ case 'S':
+ return vmlinux ? 1 : 0;
+ }
+
+ return 0;
+}
+
+static void handle_keypress(int c)
+{
+ if (!key_mapped(c)) {
+ struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
+ struct termios tc, save;
+
+ print_mapped_keys();
+ fprintf(stdout, "\nEnter selection, or unmapped key to continue: ");
+ fflush(stdout);
+
+ tcgetattr(0, &save);
+ tc = save;
+ tc.c_lflag &= ~(ICANON | ECHO);
+ tc.c_cc[VMIN] = 0;
+ tc.c_cc[VTIME] = 0;
+ tcsetattr(0, TCSANOW, &tc);
+
+ poll(&stdin_poll, 1, -1);
+ c = getc(stdin);
+
+ tcsetattr(0, TCSAFLUSH, &save);
+ if (!key_mapped(c))
+ return;
+ }
+
+ switch (c) {
+ case 'd':
+ prompt_integer(&delay_secs, "Enter display delay");
+ break;
+ case 'e':
+ prompt_integer(&print_entries, "Enter display entries (lines)");
+ break;
+ case 'E':
+ if (nr_counters > 1) {
+ int i;
+
+ fprintf(stderr, "\nAvailable events:");
+ for (i = 0; i < nr_counters; i++)
+ fprintf(stderr, "\n\t%d %s", i, event_name(i));
+
+ prompt_integer(&sym_counter, "Enter details event counter");
+
+ if (sym_counter >= nr_counters) {
+ fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(0));
+ sym_counter = 0;
+ sleep(1);
+ }
+ } else sym_counter = 0;
+ break;
+ case 'f':
+ prompt_integer(&count_filter, "Enter display event count filter");
+ break;
+ case 'F':
+ prompt_percent(&sym_pcnt_filter, "Enter details display event filter (percent)");
+ break;
+ case 'q':
+ case 'Q':
+ printf("exiting.\n");
+ exit(0);
+ case 's':
+ prompt_symbol(&sym_filter_entry, "Enter details symbol");
+ break;
+ case 'S':
+ if (!sym_filter_entry)
+ break;
+ else {
+ struct sym_entry *syme = sym_filter_entry;
+
+ pthread_mutex_lock(&syme->source_lock);
+ sym_filter_entry = NULL;
+ __zero_source_counters(syme);
+ pthread_mutex_unlock(&syme->source_lock);
+ }
+ break;
+ case 'w':
+ display_weighted = ~display_weighted;
+ break;
+ case 'z':
+ zero = ~zero;
+ break;
+ }
+}
+
+static void *display_thread(void *arg __used)
{
struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
- int delay_msecs = delay_secs * 1000;
+ struct termios tc, save;
+ int delay_msecs, c;
- printf("PerfTop refresh period: %d seconds\n", delay_secs);
+ tcgetattr(0, &save);
+ tc = save;
+ tc.c_lflag &= ~(ICANON | ECHO);
+ tc.c_cc[VMIN] = 0;
+ tc.c_cc[VTIME] = 0;
+
+repeat:
+ delay_msecs = delay_secs * 1000;
+ tcsetattr(0, TCSANOW, &tc);
+ /* trash return*/
+ getc(stdin);
do {
print_sym_table();
} while (!poll(&stdin_poll, 1, delay_msecs) == 1);
- printf("key pressed - exiting.\n");
- exit(0);
+ c = getc(stdin);
+ tcsetattr(0, TCSAFLUSH, &save);
+
+ handle_keypress(c);
+ goto repeat;
return NULL;
}
+/* Tag samples to be skipped. */
+static const char *skip_symbols[] = {
+ "default_idle",
+ "cpu_idle",
+ "enter_idle",
+ "exit_idle",
+ "mwait_idle",
+ "mwait_idle_with_hints",
+ "ppc64_runlatch_off",
+ "pseries_dedicated_idle_sleep",
+ NULL
+};
+
static int symbol_filter(struct dso *self, struct symbol *sym)
{
- static int filter_match;
struct sym_entry *syme;
const char *name = sym->name;
+ int i;
+
+ /*
+ * ppc64 uses function descriptors and appends a '.' to the
+ * start of every instruction address. Remove it.
+ */
+ if (name[0] == '.')
+ name++;
if (!strcmp(name, "_text") ||
!strcmp(name, "_etext") ||
@@ -302,37 +798,17 @@
return 1;
syme = dso__sym_priv(self, sym);
- /* Tag samples to be skipped. */
- if (!strcmp("default_idle", name) ||
- !strcmp("cpu_idle", name) ||
- !strcmp("enter_idle", name) ||
- !strcmp("exit_idle", name) ||
- !strcmp("mwait_idle", name))
- syme->skip = 1;
+ pthread_mutex_init(&syme->source_lock, NULL);
+ if (!sym_filter_entry && sym_filter && !strcmp(name, sym_filter))
+ sym_filter_entry = syme;
- if (filter_match == 1) {
- filter_end = sym->start;
- filter_match = -1;
- if (filter_end - filter_start > 10000) {
- fprintf(stderr,
- "hm, too large filter symbol <%s> - skipping.\n",
- sym_filter);
- fprintf(stderr, "symbol filter start: %016lx\n",
- filter_start);
- fprintf(stderr, " end: %016lx\n",
- filter_end);
- filter_end = filter_start = 0;
- sym_filter = NULL;
- sleep(1);
+ for (i = 0; skip_symbols[i]; i++) {
+ if (!strcmp(skip_symbols[i], name)) {
+ syme->skip = 1;
+ break;
}
}
- if (filter_match == 0 && sym_filter && !strcmp(name, sym_filter)) {
- filter_match = 1;
- filter_start = sym->start;
- }
-
-
return 0;
}
@@ -340,12 +816,13 @@
{
struct rb_node *node;
struct symbol *sym;
+ int modules = vmlinux ? 1 : 0;
kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry));
if (kernel_dso == NULL)
return -1;
- if (dso__load_kernel(kernel_dso, NULL, symbol_filter, 1) != 0)
+ if (dso__load_kernel(kernel_dso, vmlinux, symbol_filter, verbose, modules) <= 0)
goto out_delete_dso;
node = rb_first(&kernel_dso->syms);
@@ -367,8 +844,6 @@
return -1;
}
-#define TRACE_COUNT 3
-
/*
* Binary search in the histogram table and record the hit:
*/
@@ -381,6 +856,7 @@
if (!syme->skip) {
syme->count[counter]++;
+ record_precise_ip(syme, counter, ip);
pthread_mutex_lock(&active_symbols_lock);
if (list_empty(&syme->node) || !syme->node.next)
__list_insert_active_sym(syme);
@@ -392,11 +868,11 @@
samples--;
}
-static void process_event(u64 ip, int counter)
+static void process_event(u64 ip, int counter, int user)
{
samples++;
- if (ip < min_ip || ip > max_ip) {
+ if (user) {
userspace_samples++;
return;
}
@@ -407,7 +883,7 @@
struct mmap_data {
int counter;
void *base;
- unsigned int mask;
+ int mask;
unsigned int prev;
};
@@ -509,9 +985,10 @@
old += size;
- if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) {
- if (event->header.type & PERF_SAMPLE_IP)
- process_event(event->ip.ip, md->counter);
+ if (event->header.type == PERF_EVENT_SAMPLE) {
+ int user =
+ (event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK) == PERF_EVENT_MISC_USER;
+ process_event(event->ip.ip, md->counter, user);
}
}
@@ -537,7 +1014,7 @@
static void start_counter(int i, int counter)
{
struct perf_counter_attr *attr;
- unsigned int cpu;
+ int cpu;
cpu = profile_cpu;
if (target_pid == -1 && profile_cpu == -1)
@@ -547,6 +1024,7 @@
attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
attr->freq = freq;
+ attr->inherit = (cpu < 0) && inherit;
try_again:
fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0);
@@ -660,6 +1138,7 @@
"system-wide collection from all CPUs"),
OPT_INTEGER('C', "CPU", &profile_cpu,
"CPU to profile on"),
+ OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
OPT_INTEGER('m', "mmap-pages", &mmap_pages,
"number of mmap data pages"),
OPT_INTEGER('r', "realtime", &realtime_prio,
@@ -672,9 +1151,11 @@
"only display functions with more events than this"),
OPT_BOOLEAN('g', "group", &group,
"put the counters into a counter group"),
- OPT_STRING('s', "sym-filter", &sym_filter, "pattern",
- "only display symbols matchig this pattern"),
- OPT_BOOLEAN('z', "zero", &group,
+ OPT_BOOLEAN('i', "inherit", &inherit,
+ "child tasks inherit counters"),
+ OPT_STRING('s', "sym-annotate", &sym_filter, "symbol name",
+ "symbol to annotate - requires -k option"),
+ OPT_BOOLEAN('z', "zero", &zero,
"zero history across updates"),
OPT_INTEGER('F', "freq", &freq,
"profile at this frequency"),
@@ -685,10 +1166,12 @@
OPT_END()
};
-int cmd_top(int argc, const char **argv, const char *prefix)
+int cmd_top(int argc, const char **argv, const char *prefix __used)
{
int counter;
+ symbol__init();
+
page_size = sysconf(_SC_PAGE_SIZE);
argc = parse_options(argc, argv, options, top_usage, 0);
@@ -714,6 +1197,7 @@
delay_secs = 1;
parse_symbols();
+ parse_source(sym_filter_entry);
/*
* Fill in the ones not specifically initialized via -c:
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 4eb7259..31982ad 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -12,6 +12,8 @@
#include "util/cache.h"
#include "util/quote.h"
#include "util/run-command.h"
+#include "util/parse-events.h"
+#include "util/string.h"
const char perf_usage_string[] =
"perf [--version] [--help] COMMAND [ARGS]";
@@ -25,6 +27,8 @@
int val;
};
+static char debugfs_mntpt[MAXPATHLEN];
+
static int pager_command_config(const char *var, const char *value, void *data)
{
struct pager_config *c = data;
@@ -56,6 +60,15 @@
}
}
+static void set_debugfs_path(void)
+{
+ char *path;
+
+ path = getenv(PERF_DEBUGFS_ENVIRONMENT);
+ snprintf(debugfs_path, MAXPATHLEN, "%s/%s", path ?: debugfs_mntpt,
+ "tracing/events");
+}
+
static int handle_options(const char*** argv, int* argc, int* envchanged)
{
int handled = 0;
@@ -122,6 +135,22 @@
setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1);
if (envchanged)
*envchanged = 1;
+ } else if (!strcmp(cmd, "--debugfs-dir")) {
+ if (*argc < 2) {
+ fprintf(stderr, "No directory given for --debugfs-dir.\n");
+ usage(perf_usage_string);
+ }
+ strncpy(debugfs_mntpt, (*argv)[1], MAXPATHLEN);
+ debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+ if (envchanged)
+ *envchanged = 1;
+ (*argv)++;
+ (*argc)--;
+ } else if (!prefixcmp(cmd, "--debugfs-dir=")) {
+ strncpy(debugfs_mntpt, cmd + 14, MAXPATHLEN);
+ debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+ if (envchanged)
+ *envchanged = 1;
} else {
fprintf(stderr, "Unknown option: %s\n", cmd);
usage(perf_usage_string);
@@ -228,9 +257,7 @@
if (use_pager == -1 && p->option & USE_PAGER)
use_pager = 1;
commit_pager_choice();
-
- if (p->option & NEED_WORK_TREE)
- /* setup_work_tree() */;
+ set_debugfs_path();
status = p->fn(argc, argv, prefix);
if (status)
@@ -266,7 +293,7 @@
{ "annotate", cmd_annotate, 0 },
{ "version", cmd_version, 0 },
};
- int i;
+ unsigned int i;
static const char ext[] = STRIP_EXTENSION;
if (sizeof(ext) > 1) {
@@ -349,6 +376,49 @@
return done_alias;
}
+/* mini /proc/mounts parser: searching for "^blah /mount/point debugfs" */
+static void get_debugfs_mntpt(void)
+{
+ FILE *file;
+ char fs_type[100];
+ char debugfs[MAXPATHLEN];
+
+ /*
+ * try the standard location
+ */
+ if (valid_debugfs_mount("/sys/kernel/debug/") == 0) {
+ strcpy(debugfs_mntpt, "/sys/kernel/debug/");
+ return;
+ }
+
+ /*
+ * try the sane location
+ */
+ if (valid_debugfs_mount("/debug/") == 0) {
+ strcpy(debugfs_mntpt, "/debug/");
+ return;
+ }
+
+ /*
+ * give up and parse /proc/mounts
+ */
+ file = fopen("/proc/mounts", "r");
+ if (file == NULL)
+ return;
+
+ while (fscanf(file, "%*s %"
+ STR(MAXPATHLEN)
+ "s %99s %*s %*d %*d\n",
+ debugfs, fs_type) == 2) {
+ if (strcmp(fs_type, "debugfs") == 0)
+ break;
+ }
+ fclose(file);
+ if (strcmp(fs_type, "debugfs") == 0) {
+ strncpy(debugfs_mntpt, debugfs, MAXPATHLEN);
+ debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+ }
+}
int main(int argc, const char **argv)
{
@@ -357,7 +427,8 @@
cmd = perf_extract_argv0_path(argv[0]);
if (!cmd)
cmd = "perf-help";
-
+ /* get debugfs mount point from /proc/mounts */
+ get_debugfs_mntpt();
/*
* "perf-xxxx" is the same as "perf xxxx", but we obviously:
*
@@ -380,6 +451,7 @@
argc--;
handle_options(&argv, &argc, NULL);
commit_pager_choice();
+ set_debugfs_path();
if (argc > 0) {
if (!prefixcmp(argv[0], "--"))
argv[0] += 2;
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ceb68aa..e5148e2 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -1,7 +1,13 @@
#ifndef _PERF_PERF_H
#define _PERF_PERF_H
-#if defined(__x86_64__) || defined(__i386__)
+#if defined(__i386__)
+#include "../../arch/x86/include/asm/unistd.h"
+#define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
+#define cpu_relax() asm volatile("rep; nop" ::: "memory");
+#endif
+
+#if defined(__x86_64__)
#include "../../arch/x86/include/asm/unistd.h"
#define rmb() asm volatile("lfence" ::: "memory")
#define cpu_relax() asm volatile("rep; nop" ::: "memory");
@@ -19,13 +25,29 @@
#define cpu_relax() asm volatile("" ::: "memory");
#endif
+#ifdef __sh__
+#include "../../arch/sh/include/asm/unistd.h"
+#if defined(__SH4A__) || defined(__SH5__)
+# define rmb() asm volatile("synco" ::: "memory")
+#else
+# define rmb() asm volatile("" ::: "memory")
+#endif
+#define cpu_relax() asm volatile("" ::: "memory")
+#endif
+
+#ifdef __hppa__
+#include "../../arch/parisc/include/asm/unistd.h"
+#define rmb() asm volatile("" ::: "memory")
+#define cpu_relax() asm volatile("" ::: "memory");
+#endif
+
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/syscall.h>
#include "../../include/linux/perf_counter.h"
-#include "types.h"
+#include "util/types.h"
/*
* prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
@@ -52,6 +74,8 @@
#define __user
#define asmlinkage
+#define __used __attribute__((__unused__))
+
#define unlikely(x) __builtin_expect(!!(x), 0)
#define min(x, y) ({ \
typeof(x) _min1 = (x); \
@@ -72,10 +96,9 @@
#define MAX_COUNTERS 256
#define MAX_NR_CPUS 256
-struct perf_file_header {
- u64 version;
- u64 sample_type;
- u64 data_size;
+struct ip_callchain {
+ u64 nr;
+ u64 ips[0];
};
#endif
diff --git a/tools/perf/util/alias.c b/tools/perf/util/alias.c
index 9b3dd2b..b8144e8 100644
--- a/tools/perf/util/alias.c
+++ b/tools/perf/util/alias.c
@@ -3,7 +3,7 @@
static const char *alias_key;
static char *alias_val;
-static int alias_lookup_cb(const char *k, const char *v, void *cb)
+static int alias_lookup_cb(const char *k, const char *v, void *cb __used)
{
if (!prefixcmp(k, "alias.") && !strcmp(k+6, alias_key)) {
if (!v)
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 393d614..4b50c41 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -3,6 +3,7 @@
#include "util.h"
#include "strbuf.h"
+#include "../perf.h"
#define PERF_DIR_ENVIRONMENT "PERF_DIR"
#define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE"
@@ -17,6 +18,7 @@
#define PERFATTRIBUTES_FILE ".perfattributes"
#define INFOATTRIBUTES_FILE "info/attributes"
#define ATTRIBUTE_MACRO_PREFIX "[attr]"
+#define PERF_DEBUGFS_ENVIRONMENT "PERF_DEBUGFS_DIR"
typedef int (*config_fn_t)(const char *, const char *, void *);
extern int perf_default_config(const char *, const char *, void *);
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
new file mode 100644
index 0000000..0114734
--- /dev/null
+++ b/tools/perf/util/callchain.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Handle the callchains from the stream in an ad-hoc radix tree and then
+ * sort them in an rbtree.
+ *
+ * Using a radix for code path provides a fast retrieval and factorizes
+ * memory use. Also that lets us use the paths in a hierarchical graph view.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <math.h>
+
+#include "callchain.h"
+
+#define chain_for_each_child(child, parent) \
+ list_for_each_entry(child, &parent->children, brothers)
+
+static void
+rb_insert_callchain(struct rb_root *root, struct callchain_node *chain,
+ enum chain_mode mode)
+{
+ struct rb_node **p = &root->rb_node;
+ struct rb_node *parent = NULL;
+ struct callchain_node *rnode;
+ u64 chain_cumul = cumul_hits(chain);
+
+ while (*p) {
+ u64 rnode_cumul;
+
+ parent = *p;
+ rnode = rb_entry(parent, struct callchain_node, rb_node);
+ rnode_cumul = cumul_hits(rnode);
+
+ switch (mode) {
+ case CHAIN_FLAT:
+ if (rnode->hit < chain->hit)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ break;
+ case CHAIN_GRAPH_ABS: /* Falldown */
+ case CHAIN_GRAPH_REL:
+ if (rnode_cumul < chain_cumul)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ break;
+ default:
+ break;
+ }
+ }
+
+ rb_link_node(&chain->rb_node, parent, p);
+ rb_insert_color(&chain->rb_node, root);
+}
+
+static void
+__sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
+ u64 min_hit)
+{
+ struct callchain_node *child;
+
+ chain_for_each_child(child, node)
+ __sort_chain_flat(rb_root, child, min_hit);
+
+ if (node->hit && node->hit >= min_hit)
+ rb_insert_callchain(rb_root, node, CHAIN_FLAT);
+}
+
+/*
+ * Once we get every callchains from the stream, we can now
+ * sort them by hit
+ */
+static void
+sort_chain_flat(struct rb_root *rb_root, struct callchain_node *node,
+ u64 min_hit, struct callchain_param *param __used)
+{
+ __sort_chain_flat(rb_root, node, min_hit);
+}
+
+static void __sort_chain_graph_abs(struct callchain_node *node,
+ u64 min_hit)
+{
+ struct callchain_node *child;
+
+ node->rb_root = RB_ROOT;
+
+ chain_for_each_child(child, node) {
+ __sort_chain_graph_abs(child, min_hit);
+ if (cumul_hits(child) >= min_hit)
+ rb_insert_callchain(&node->rb_root, child,
+ CHAIN_GRAPH_ABS);
+ }
+}
+
+static void
+sort_chain_graph_abs(struct rb_root *rb_root, struct callchain_node *chain_root,
+ u64 min_hit, struct callchain_param *param __used)
+{
+ __sort_chain_graph_abs(chain_root, min_hit);
+ rb_root->rb_node = chain_root->rb_root.rb_node;
+}
+
+static void __sort_chain_graph_rel(struct callchain_node *node,
+ double min_percent)
+{
+ struct callchain_node *child;
+ u64 min_hit;
+
+ node->rb_root = RB_ROOT;
+ min_hit = ceil(node->children_hit * min_percent);
+
+ chain_for_each_child(child, node) {
+ __sort_chain_graph_rel(child, min_percent);
+ if (cumul_hits(child) >= min_hit)
+ rb_insert_callchain(&node->rb_root, child,
+ CHAIN_GRAPH_REL);
+ }
+}
+
+static void
+sort_chain_graph_rel(struct rb_root *rb_root, struct callchain_node *chain_root,
+ u64 min_hit __used, struct callchain_param *param)
+{
+ __sort_chain_graph_rel(chain_root, param->min_percent / 100.0);
+ rb_root->rb_node = chain_root->rb_root.rb_node;
+}
+
+int register_callchain_param(struct callchain_param *param)
+{
+ switch (param->mode) {
+ case CHAIN_GRAPH_ABS:
+ param->sort = sort_chain_graph_abs;
+ break;
+ case CHAIN_GRAPH_REL:
+ param->sort = sort_chain_graph_rel;
+ break;
+ case CHAIN_FLAT:
+ param->sort = sort_chain_flat;
+ break;
+ default:
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Create a child for a parent. If inherit_children, then the new child
+ * will become the new parent of it's parent children
+ */
+static struct callchain_node *
+create_child(struct callchain_node *parent, bool inherit_children)
+{
+ struct callchain_node *new;
+
+ new = malloc(sizeof(*new));
+ if (!new) {
+ perror("not enough memory to create child for code path tree");
+ return NULL;
+ }
+ new->parent = parent;
+ INIT_LIST_HEAD(&new->children);
+ INIT_LIST_HEAD(&new->val);
+
+ if (inherit_children) {
+ struct callchain_node *next;
+
+ list_splice(&parent->children, &new->children);
+ INIT_LIST_HEAD(&parent->children);
+
+ chain_for_each_child(next, new)
+ next->parent = new;
+ }
+ list_add_tail(&new->brothers, &parent->children);
+
+ return new;
+}
+
+/*
+ * Fill the node with callchain values
+ */
+static void
+fill_node(struct callchain_node *node, struct ip_callchain *chain,
+ int start, struct symbol **syms)
+{
+ unsigned int i;
+
+ for (i = start; i < chain->nr; i++) {
+ struct callchain_list *call;
+
+ call = malloc(sizeof(*call));
+ if (!call) {
+ perror("not enough memory for the code path tree");
+ return;
+ }
+ call->ip = chain->ips[i];
+ call->sym = syms[i];
+ list_add_tail(&call->list, &node->val);
+ }
+ node->val_nr = chain->nr - start;
+ if (!node->val_nr)
+ printf("Warning: empty node in callchain tree\n");
+}
+
+static void
+add_child(struct callchain_node *parent, struct ip_callchain *chain,
+ int start, struct symbol **syms)
+{
+ struct callchain_node *new;
+
+ new = create_child(parent, false);
+ fill_node(new, chain, start, syms);
+
+ new->children_hit = 0;
+ new->hit = 1;
+}
+
+/*
+ * Split the parent in two parts (a new child is created) and
+ * give a part of its callchain to the created child.
+ * Then create another child to host the given callchain of new branch
+ */
+static void
+split_add_child(struct callchain_node *parent, struct ip_callchain *chain,
+ struct callchain_list *to_split, int idx_parents, int idx_local,
+ struct symbol **syms)
+{
+ struct callchain_node *new;
+ struct list_head *old_tail;
+ unsigned int idx_total = idx_parents + idx_local;
+
+ /* split */
+ new = create_child(parent, true);
+
+ /* split the callchain and move a part to the new child */
+ old_tail = parent->val.prev;
+ list_del_range(&to_split->list, old_tail);
+ new->val.next = &to_split->list;
+ new->val.prev = old_tail;
+ to_split->list.prev = &new->val;
+ old_tail->next = &new->val;
+
+ /* split the hits */
+ new->hit = parent->hit;
+ new->children_hit = parent->children_hit;
+ parent->children_hit = cumul_hits(new);
+ new->val_nr = parent->val_nr - idx_local;
+ parent->val_nr = idx_local;
+
+ /* create a new child for the new branch if any */
+ if (idx_total < chain->nr) {
+ parent->hit = 0;
+ add_child(parent, chain, idx_total, syms);
+ parent->children_hit++;
+ } else {
+ parent->hit = 1;
+ }
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ unsigned int start, struct symbol **syms);
+
+static void
+__append_chain_children(struct callchain_node *root, struct ip_callchain *chain,
+ struct symbol **syms, unsigned int start)
+{
+ struct callchain_node *rnode;
+
+ /* lookup in childrens */
+ chain_for_each_child(rnode, root) {
+ unsigned int ret = __append_chain(rnode, chain, start, syms);
+
+ if (!ret)
+ goto inc_children_hit;
+ }
+ /* nothing in children, add to the current node */
+ add_child(root, chain, start, syms);
+
+inc_children_hit:
+ root->children_hit++;
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ unsigned int start, struct symbol **syms)
+{
+ struct callchain_list *cnode;
+ unsigned int i = start;
+ bool found = false;
+
+ /*
+ * Lookup in the current node
+ * If we have a symbol, then compare the start to match
+ * anywhere inside a function.
+ */
+ list_for_each_entry(cnode, &root->val, list) {
+ if (i == chain->nr)
+ break;
+ if (cnode->sym && syms[i]) {
+ if (cnode->sym->start != syms[i]->start)
+ break;
+ } else if (cnode->ip != chain->ips[i])
+ break;
+ if (!found)
+ found = true;
+ i++;
+ }
+
+ /* matches not, relay on the parent */
+ if (!found)
+ return -1;
+
+ /* we match only a part of the node. Split it and add the new chain */
+ if (i - start < root->val_nr) {
+ split_add_child(root, chain, cnode, start, i - start, syms);
+ return 0;
+ }
+
+ /* we match 100% of the path, increment the hit */
+ if (i - start == root->val_nr && i == chain->nr) {
+ root->hit++;
+ return 0;
+ }
+
+ /* We match the node and still have a part remaining */
+ __append_chain_children(root, chain, syms, i);
+
+ return 0;
+}
+
+void append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ struct symbol **syms)
+{
+ if (!chain->nr)
+ return;
+ __append_chain_children(root, chain, syms, 0);
+}
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
new file mode 100644
index 0000000..a926ae4
--- /dev/null
+++ b/tools/perf/util/callchain.h
@@ -0,0 +1,60 @@
+#ifndef __PERF_CALLCHAIN_H
+#define __PERF_CALLCHAIN_H
+
+#include "../perf.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include "symbol.h"
+
+enum chain_mode {
+ CHAIN_NONE,
+ CHAIN_FLAT,
+ CHAIN_GRAPH_ABS,
+ CHAIN_GRAPH_REL
+};
+
+struct callchain_node {
+ struct callchain_node *parent;
+ struct list_head brothers;
+ struct list_head children;
+ struct list_head val;
+ struct rb_node rb_node; /* to sort nodes in an rbtree */
+ struct rb_root rb_root; /* sorted tree of children */
+ unsigned int val_nr;
+ u64 hit;
+ u64 children_hit;
+};
+
+struct callchain_param;
+
+typedef void (*sort_chain_func_t)(struct rb_root *, struct callchain_node *,
+ u64, struct callchain_param *);
+
+struct callchain_param {
+ enum chain_mode mode;
+ double min_percent;
+ sort_chain_func_t sort;
+};
+
+struct callchain_list {
+ u64 ip;
+ struct symbol *sym;
+ struct list_head list;
+};
+
+static inline void callchain_init(struct callchain_node *node)
+{
+ INIT_LIST_HEAD(&node->brothers);
+ INIT_LIST_HEAD(&node->children);
+ INIT_LIST_HEAD(&node->val);
+}
+
+static inline u64 cumul_hits(struct callchain_node *node)
+{
+ return node->hit + node->children_hit;
+}
+
+int register_callchain_param(struct callchain_param *param);
+void append_chain(struct callchain_node *root, struct ip_callchain *chain,
+ struct symbol **syms);
+#endif
diff --git a/tools/perf/util/color.c b/tools/perf/util/color.c
index 9a8c20c..90a044d 100644
--- a/tools/perf/util/color.c
+++ b/tools/perf/util/color.c
@@ -11,7 +11,8 @@
};
char *end;
int i;
- for (i = 0; i < ARRAY_SIZE(color_names); i++) {
+
+ for (i = 0; i < (int)ARRAY_SIZE(color_names); i++) {
const char *str = color_names[i];
if (!strncasecmp(name, str, len) && !str[len])
return i - 1;
@@ -28,7 +29,8 @@
static const char * const attr_names[] = {
"bold", "dim", "ul", "blink", "reverse"
};
- int i;
+ unsigned int i;
+
for (i = 0; i < ARRAY_SIZE(attr_names); i++) {
const char *str = attr_names[i];
if (!strncasecmp(name, str, len) && !str[len])
@@ -222,10 +224,12 @@
{
if (!*color)
return fwrite(buf, count, 1, fp) != 1;
+
while (count) {
char *p = memchr(buf, '\n', count);
+
if (p != buf && (fputs(color, fp) < 0 ||
- fwrite(buf, p ? p - buf : count, 1, fp) != 1 ||
+ fwrite(buf, p ? (size_t)(p - buf) : count, 1, fp) != 1 ||
fputs(PERF_COLOR_RESET, fp) < 0))
return -1;
if (!p)
@@ -238,4 +242,31 @@
return 0;
}
+char *get_percent_color(double percent)
+{
+ char *color = PERF_COLOR_NORMAL;
+ /*
+ * We color high-overhead entries in red, mid-overhead
+ * entries in green - and keep the low overhead places
+ * normal:
+ */
+ if (percent >= MIN_RED)
+ color = PERF_COLOR_RED;
+ else {
+ if (percent > MIN_GREEN)
+ color = PERF_COLOR_GREEN;
+ }
+ return color;
+}
+
+int percent_color_fprintf(FILE *fp, const char *fmt, double percent)
+{
+ int r;
+ char *color;
+
+ color = get_percent_color(percent);
+ r = color_fprintf(fp, color, fmt, percent);
+
+ return r;
+}
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
index 5abfd37..706cec5 100644
--- a/tools/perf/util/color.h
+++ b/tools/perf/util/color.h
@@ -15,6 +15,9 @@
#define PERF_COLOR_CYAN "\033[36m"
#define PERF_COLOR_BG_RED "\033[41m"
+#define MIN_GREEN 0.5
+#define MIN_RED 5.0
+
/*
* This variable stores the value of color.ui
*/
@@ -32,5 +35,7 @@
int color_fprintf(FILE *fp, const char *color, const char *fmt, ...);
int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
int color_fwrite_lines(FILE *fp, const char *color, size_t count, const char *buf);
+int percent_color_fprintf(FILE *fp, const char *fmt, double percent);
+char *get_percent_color(double percent);
#endif /* COLOR_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index 3dd13fa..780df54 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -47,10 +47,12 @@
static char *parse_value(void)
{
static char value[1024];
- int quote = 0, comment = 0, len = 0, space = 0;
+ int quote = 0, comment = 0, space = 0;
+ size_t len = 0;
for (;;) {
int c = get_next_char();
+
if (len >= sizeof(value) - 1)
return NULL;
if (c == '\n') {
@@ -353,13 +355,13 @@
return 0;
}
-static int perf_default_core_config(const char *var, const char *value)
+static int perf_default_core_config(const char *var __used, const char *value __used)
{
/* Add other config variables here and to Documentation/config.txt. */
return 0;
}
-int perf_default_config(const char *var, const char *value, void *dummy)
+int perf_default_config(const char *var, const char *value, void *dummy __used)
{
if (!prefixcmp(var, "core."))
return perf_default_core_config(var, value);
@@ -471,10 +473,10 @@
!regexec(store.value_regex, value, 0, NULL, 0)));
}
-static int store_aux(const char* key, const char* value, void *cb)
+static int store_aux(const char* key, const char* value, void *cb __used)
{
+ int section_len;
const char *ep;
- size_t section_len;
switch (store.state) {
case KEY_SEEN:
@@ -551,7 +553,7 @@
strbuf_addf(&sb, "[%.*s]\n", store.baselen, key);
}
- success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+ success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
strbuf_release(&sb);
return success;
@@ -599,7 +601,7 @@
}
strbuf_addf(&sb, "%s\n", quote);
- success = write_in_full(fd, sb.buf, sb.len) == sb.len;
+ success = (write_in_full(fd, sb.buf, sb.len) == (ssize_t)sb.len);
strbuf_release(&sb);
return success;
@@ -741,7 +743,7 @@
} else {
struct stat st;
char* contents;
- size_t contents_sz, copy_begin, copy_end;
+ ssize_t contents_sz, copy_begin, copy_end;
int i, new_line = 0;
if (value_regex == NULL)
diff --git a/tools/perf/util/exec_cmd.c b/tools/perf/util/exec_cmd.c
index d392922..34a3528 100644
--- a/tools/perf/util/exec_cmd.c
+++ b/tools/perf/util/exec_cmd.c
@@ -1,6 +1,9 @@
#include "cache.h"
#include "exec_cmd.h"
#include "quote.h"
+
+#include <string.h>
+
#define MAX_ARGS 32
extern char **environ;
@@ -51,7 +54,7 @@
slash--;
if (slash >= argv0) {
- argv0_path = strndup(argv0, slash - argv0);
+ argv0_path = xstrndup(argv0, slash - argv0);
return slash + 1;
}
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
new file mode 100644
index 0000000..b92a457
--- /dev/null
+++ b/tools/perf/util/header.c
@@ -0,0 +1,245 @@
+#include <sys/types.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "util.h"
+#include "header.h"
+
+/*
+ *
+ */
+
+struct perf_header_attr *perf_header_attr__new(struct perf_counter_attr *attr)
+{
+ struct perf_header_attr *self = malloc(sizeof(*self));
+
+ if (!self)
+ die("nomem");
+
+ self->attr = *attr;
+ self->ids = 0;
+ self->size = 1;
+ self->id = malloc(sizeof(u64));
+
+ if (!self->id)
+ die("nomem");
+
+ return self;
+}
+
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id)
+{
+ int pos = self->ids;
+
+ self->ids++;
+ if (self->ids > self->size) {
+ self->size *= 2;
+ self->id = realloc(self->id, self->size * sizeof(u64));
+ if (!self->id)
+ die("nomem");
+ }
+ self->id[pos] = id;
+}
+
+/*
+ *
+ */
+
+struct perf_header *perf_header__new(void)
+{
+ struct perf_header *self = malloc(sizeof(*self));
+
+ if (!self)
+ die("nomem");
+
+ self->frozen = 0;
+
+ self->attrs = 0;
+ self->size = 1;
+ self->attr = malloc(sizeof(void *));
+
+ if (!self->attr)
+ die("nomem");
+
+ self->data_offset = 0;
+ self->data_size = 0;
+
+ return self;
+}
+
+void perf_header__add_attr(struct perf_header *self,
+ struct perf_header_attr *attr)
+{
+ int pos = self->attrs;
+
+ if (self->frozen)
+ die("frozen");
+
+ self->attrs++;
+ if (self->attrs > self->size) {
+ self->size *= 2;
+ self->attr = realloc(self->attr, self->size * sizeof(void *));
+ if (!self->attr)
+ die("nomem");
+ }
+ self->attr[pos] = attr;
+}
+
+static const char *__perf_magic = "PERFFILE";
+
+#define PERF_MAGIC (*(u64 *)__perf_magic)
+
+struct perf_file_section {
+ u64 offset;
+ u64 size;
+};
+
+struct perf_file_attr {
+ struct perf_counter_attr attr;
+ struct perf_file_section ids;
+};
+
+struct perf_file_header {
+ u64 magic;
+ u64 size;
+ u64 attr_size;
+ struct perf_file_section attrs;
+ struct perf_file_section data;
+};
+
+static void do_write(int fd, void *buf, size_t size)
+{
+ while (size) {
+ int ret = write(fd, buf, size);
+
+ if (ret < 0)
+ die("failed to write");
+
+ size -= ret;
+ buf += ret;
+ }
+}
+
+void perf_header__write(struct perf_header *self, int fd)
+{
+ struct perf_file_header f_header;
+ struct perf_file_attr f_attr;
+ struct perf_header_attr *attr;
+ int i;
+
+ lseek(fd, sizeof(f_header), SEEK_SET);
+
+
+ for (i = 0; i < self->attrs; i++) {
+ attr = self->attr[i];
+
+ attr->id_offset = lseek(fd, 0, SEEK_CUR);
+ do_write(fd, attr->id, attr->ids * sizeof(u64));
+ }
+
+
+ self->attr_offset = lseek(fd, 0, SEEK_CUR);
+
+ for (i = 0; i < self->attrs; i++) {
+ attr = self->attr[i];
+
+ f_attr = (struct perf_file_attr){
+ .attr = attr->attr,
+ .ids = {
+ .offset = attr->id_offset,
+ .size = attr->ids * sizeof(u64),
+ }
+ };
+ do_write(fd, &f_attr, sizeof(f_attr));
+ }
+
+
+ self->data_offset = lseek(fd, 0, SEEK_CUR);
+
+ f_header = (struct perf_file_header){
+ .magic = PERF_MAGIC,
+ .size = sizeof(f_header),
+ .attr_size = sizeof(f_attr),
+ .attrs = {
+ .offset = self->attr_offset,
+ .size = self->attrs * sizeof(f_attr),
+ },
+ .data = {
+ .offset = self->data_offset,
+ .size = self->data_size,
+ },
+ };
+
+ lseek(fd, 0, SEEK_SET);
+ do_write(fd, &f_header, sizeof(f_header));
+ lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+ self->frozen = 1;
+}
+
+static void do_read(int fd, void *buf, size_t size)
+{
+ while (size) {
+ int ret = read(fd, buf, size);
+
+ if (ret < 0)
+ die("failed to read");
+ if (ret == 0)
+ die("failed to read: missing data");
+
+ size -= ret;
+ buf += ret;
+ }
+}
+
+struct perf_header *perf_header__read(int fd)
+{
+ struct perf_header *self = perf_header__new();
+ struct perf_file_header f_header;
+ struct perf_file_attr f_attr;
+ u64 f_id;
+
+ int nr_attrs, nr_ids, i, j;
+
+ lseek(fd, 0, SEEK_SET);
+ do_read(fd, &f_header, sizeof(f_header));
+
+ if (f_header.magic != PERF_MAGIC ||
+ f_header.size != sizeof(f_header) ||
+ f_header.attr_size != sizeof(f_attr))
+ die("incompatible file format");
+
+ nr_attrs = f_header.attrs.size / sizeof(f_attr);
+ lseek(fd, f_header.attrs.offset, SEEK_SET);
+
+ for (i = 0; i < nr_attrs; i++) {
+ struct perf_header_attr *attr;
+ off_t tmp;
+
+ do_read(fd, &f_attr, sizeof(f_attr));
+ tmp = lseek(fd, 0, SEEK_CUR);
+
+ attr = perf_header_attr__new(&f_attr.attr);
+
+ nr_ids = f_attr.ids.size / sizeof(u64);
+ lseek(fd, f_attr.ids.offset, SEEK_SET);
+
+ for (j = 0; j < nr_ids; j++) {
+ do_read(fd, &f_id, sizeof(f_id));
+
+ perf_header_attr__add_id(attr, f_id);
+ }
+ perf_header__add_attr(self, attr);
+ lseek(fd, tmp, SEEK_SET);
+ }
+
+ self->data_offset = f_header.data.offset;
+ self->data_size = f_header.data.size;
+
+ lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+ self->frozen = 1;
+
+ return self;
+}
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
new file mode 100644
index 0000000..bf28044
--- /dev/null
+++ b/tools/perf/util/header.h
@@ -0,0 +1,37 @@
+#ifndef _PERF_HEADER_H
+#define _PERF_HEADER_H
+
+#include "../../../include/linux/perf_counter.h"
+#include <sys/types.h>
+#include "types.h"
+
+struct perf_header_attr {
+ struct perf_counter_attr attr;
+ int ids, size;
+ u64 *id;
+ off_t id_offset;
+};
+
+struct perf_header {
+ int frozen;
+ int attrs, size;
+ struct perf_header_attr **attr;
+ s64 attr_offset;
+ u64 data_offset;
+ u64 data_size;
+};
+
+struct perf_header *perf_header__read(int fd);
+void perf_header__write(struct perf_header *self, int fd);
+
+void perf_header__add_attr(struct perf_header *self,
+ struct perf_header_attr *attr);
+
+struct perf_header_attr *
+perf_header_attr__new(struct perf_counter_attr *attr);
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
+
+
+struct perf_header *perf_header__new(void);
+
+#endif /* _PERF_HEADER_H */
diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c
index 6653f7d..fbb0097 100644
--- a/tools/perf/util/help.c
+++ b/tools/perf/util/help.c
@@ -26,7 +26,7 @@
return 80;
}
-void add_cmdname(struct cmdnames *cmds, const char *name, int len)
+void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
{
struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
@@ -40,7 +40,8 @@
static void clean_cmdnames(struct cmdnames *cmds)
{
- int i;
+ unsigned int i;
+
for (i = 0; i < cmds->cnt; ++i)
free(cmds->names[i]);
free(cmds->names);
@@ -57,7 +58,7 @@
static void uniq(struct cmdnames *cmds)
{
- int i, j;
+ unsigned int i, j;
if (!cmds->cnt)
return;
@@ -71,7 +72,7 @@
void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes)
{
- int ci, cj, ei;
+ size_t ci, cj, ei;
int cmp;
ci = cj = ei = 0;
@@ -106,8 +107,9 @@
printf(" ");
for (j = 0; j < cols; j++) {
- int n = j * rows + i;
- int size = space;
+ unsigned int n = j * rows + i;
+ unsigned int size = space;
+
if (n >= cmds->cnt)
break;
if (j == cols-1 || n + rows >= cmds->cnt)
@@ -126,21 +128,6 @@
!S_ISREG(st.st_mode))
return 0;
-#ifdef __MINGW32__
- /* cannot trust the executable bit, peek into the file instead */
- char buf[3] = { 0 };
- int n;
- int fd = open(name, O_RDONLY);
- st.st_mode &= ~S_IXUSR;
- if (fd >= 0) {
- n = read(fd, buf, 2);
- if (n == 2)
- /* DOS executables start with "MZ" */
- if (!strcmp(buf, "#!") || !strcmp(buf, "MZ"))
- st.st_mode |= S_IXUSR;
- close(fd);
- }
-#endif
return st.st_mode & S_IXUSR;
}
@@ -223,7 +210,7 @@
void list_commands(const char *title, struct cmdnames *main_cmds,
struct cmdnames *other_cmds)
{
- int i, longest = 0;
+ unsigned int i, longest = 0;
for (i = 0; i < main_cmds->cnt; i++)
if (longest < main_cmds->names[i]->len)
@@ -254,7 +241,8 @@
int is_in_cmdlist(struct cmdnames *c, const char *s)
{
- int i;
+ unsigned int i;
+
for (i = 0; i < c->cnt; i++)
if (!strcmp(s, c->names[i]->name))
return 1;
@@ -286,7 +274,8 @@
static void add_cmd_list(struct cmdnames *cmds, struct cmdnames *old)
{
- int i;
+ unsigned int i;
+
ALLOC_GROW(cmds->names, cmds->cnt + old->cnt, cmds->alloc);
for (i = 0; i < old->cnt; i++)
@@ -298,7 +287,7 @@
const char *help_unknown_cmd(const char *cmd)
{
- int i, n = 0, best_similarity = 0;
+ unsigned int i, n = 0, best_similarity = 0;
struct cmdnames main_cmds, other_cmds;
memset(&main_cmds, 0, sizeof(main_cmds));
@@ -360,7 +349,7 @@
exit(1);
}
-int cmd_version(int argc, const char **argv, const char *prefix)
+int cmd_version(int argc __used, const char **argv __used, const char *prefix __used)
{
printf("perf version %s\n", perf_version_string);
return 0;
diff --git a/tools/perf/util/help.h b/tools/perf/util/help.h
index 56bc154..7128783 100644
--- a/tools/perf/util/help.h
+++ b/tools/perf/util/help.h
@@ -2,8 +2,8 @@
#define HELP_H
struct cmdnames {
- int alloc;
- int cnt;
+ size_t alloc;
+ size_t cnt;
struct cmdname {
size_t len; /* also used for similarity index in help.c */
char name[FLEX_ARRAY];
@@ -19,7 +19,7 @@
void load_command_list(const char *prefix,
struct cmdnames *main_cmds,
struct cmdnames *other_cmds);
-void add_cmdname(struct cmdnames *cmds, const char *name, int len);
+void add_cmdname(struct cmdnames *cmds, const char *name, size_t len);
/* Here we require that excludes is a sorted list. */
void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes);
int is_in_cmdlist(struct cmdnames *c, const char *s);
diff --git a/tools/perf/util/include/asm/system.h b/tools/perf/util/include/asm/system.h
new file mode 100644
index 0000000..710cecc
--- /dev/null
+++ b/tools/perf/util/include/asm/system.h
@@ -0,0 +1 @@
+/* Empty */
diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h
new file mode 100644
index 0000000..a6b8739
--- /dev/null
+++ b/tools/perf/util/include/linux/kernel.h
@@ -0,0 +1,29 @@
+#ifndef PERF_LINUX_KERNEL_H_
+#define PERF_LINUX_KERNEL_H_
+
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+#ifndef container_of
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof(((type *)0)->member) * __mptr = (ptr); \
+ (type *)((char *)__mptr - offsetof(type, member)); })
+#endif
+
+#ifndef max
+#define max(x, y) ({ \
+ typeof(x) _max1 = (x); \
+ typeof(y) _max2 = (y); \
+ (void) (&_max1 == &_max2); \
+ _max1 > _max2 ? _max1 : _max2; })
+#endif
+
+#endif
diff --git a/tools/perf/util/include/linux/list.h b/tools/perf/util/include/linux/list.h
new file mode 100644
index 0000000..dbe4b81
--- /dev/null
+++ b/tools/perf/util/include/linux/list.h
@@ -0,0 +1,18 @@
+#include "../../../../include/linux/list.h"
+
+#ifndef PERF_LIST_H
+#define PERF_LIST_H
+/**
+ * list_del_range - deletes range of entries from list.
+ * @begin: first element in the range to delete from the list.
+ * @end: last element in the range to delete from the list.
+ * Note: list_empty on the range of entries does not return true after this,
+ * the entries is in an undefined state.
+ */
+static inline void list_del_range(struct list_head *begin,
+ struct list_head *end)
+{
+ begin->prev->next = end->next;
+ end->next->prev = begin->prev;
+}
+#endif
diff --git a/tools/perf/util/include/linux/module.h b/tools/perf/util/include/linux/module.h
new file mode 100644
index 0000000..b43e2dc
--- /dev/null
+++ b/tools/perf/util/include/linux/module.h
@@ -0,0 +1,6 @@
+#ifndef PERF_LINUX_MODULE_H
+#define PERF_LINUX_MODULE_H
+
+#define EXPORT_SYMBOL(name)
+
+#endif
diff --git a/tools/perf/util/include/linux/poison.h b/tools/perf/util/include/linux/poison.h
new file mode 100644
index 0000000..fef6dbc
--- /dev/null
+++ b/tools/perf/util/include/linux/poison.h
@@ -0,0 +1 @@
+#include "../../../../include/linux/poison.h"
diff --git a/tools/perf/util/include/linux/prefetch.h b/tools/perf/util/include/linux/prefetch.h
new file mode 100644
index 0000000..7841e48
--- /dev/null
+++ b/tools/perf/util/include/linux/prefetch.h
@@ -0,0 +1,6 @@
+#ifndef PERF_LINUX_PREFETCH_H
+#define PERF_LINUX_PREFETCH_H
+
+static inline void prefetch(void *a __attribute__((unused))) { }
+
+#endif
diff --git a/tools/perf/util/include/linux/rbtree.h b/tools/perf/util/include/linux/rbtree.h
new file mode 100644
index 0000000..7a243a1
--- /dev/null
+++ b/tools/perf/util/include/linux/rbtree.h
@@ -0,0 +1 @@
+#include "../../../../include/linux/rbtree.h"
diff --git a/tools/perf/util/list.h b/tools/perf/util/list.h
deleted file mode 100644
index e2548e8..0000000
--- a/tools/perf/util/list.h
+++ /dev/null
@@ -1,603 +0,0 @@
-#ifndef _LINUX_LIST_H
-#define _LINUX_LIST_H
-/*
- Copyright (C) Cast of dozens, comes from the Linux kernel
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-*/
-
-#include <stddef.h>
-
-/*
- * These are non-NULL pointers that will result in page faults
- * under normal circumstances, used to verify that nobody uses
- * non-initialized list entries.
- */
-#define LIST_POISON1 ((void *)0x00100100)
-#define LIST_POISON2 ((void *)0x00200200)
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
-/*
- * Simple doubly linked list implementation.
- *
- * Some of the internal functions ("__xxx") are useful when
- * manipulating whole lists rather than single entries, as
- * sometimes we already know the next/prev entries and we can
- * generate better code by using them directly rather than
- * using the generic single-entry routines.
- */
-
-struct list_head {
- struct list_head *next, *prev;
-};
-
-#define LIST_HEAD_INIT(name) { &(name), &(name) }
-
-#define LIST_HEAD(name) \
- struct list_head name = LIST_HEAD_INIT(name)
-
-static inline void INIT_LIST_HEAD(struct list_head *list)
-{
- list->next = list;
- list->prev = list;
-}
-
-/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add(struct list_head *new,
- struct list_head *prev,
- struct list_head *next)
-{
- next->prev = new;
- new->next = next;
- new->prev = prev;
- prev->next = new;
-}
-
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-static inline void list_add(struct list_head *new, struct list_head *head)
-{
- __list_add(new, head, head->next);
-}
-
-/**
- * list_add_tail - add a new entry
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- */
-static inline void list_add_tail(struct list_head *new, struct list_head *head)
-{
- __list_add(new, head->prev, head);
-}
-
-/*
- * Delete a list entry by making the prev/next entries
- * point to each other.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_del(struct list_head * prev, struct list_head * next)
-{
- next->prev = prev;
- prev->next = next;
-}
-
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty on entry does not return true after this, the entry is
- * in an undefined state.
- */
-static inline void list_del(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
- entry->next = LIST_POISON1;
- entry->prev = LIST_POISON2;
-}
-
-/**
- * list_del_range - deletes range of entries from list.
- * @beging: first element in the range to delete from the list.
- * @beging: first element in the range to delete from the list.
- * Note: list_empty on the range of entries does not return true after this,
- * the entries is in an undefined state.
- */
-static inline void list_del_range(struct list_head *begin,
- struct list_head *end)
-{
- begin->prev->next = end->next;
- end->next->prev = begin->prev;
-}
-
-/**
- * list_replace - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- * Note: if 'old' was empty, it will be overwritten.
- */
-static inline void list_replace(struct list_head *old,
- struct list_head *new)
-{
- new->next = old->next;
- new->next->prev = new;
- new->prev = old->prev;
- new->prev->next = new;
-}
-
-static inline void list_replace_init(struct list_head *old,
- struct list_head *new)
-{
- list_replace(old, new);
- INIT_LIST_HEAD(old);
-}
-
-/**
- * list_del_init - deletes entry from list and reinitialize it.
- * @entry: the element to delete from the list.
- */
-static inline void list_del_init(struct list_head *entry)
-{
- __list_del(entry->prev, entry->next);
- INIT_LIST_HEAD(entry);
-}
-
-/**
- * list_move - delete from one list and add as another's head
- * @list: the entry to move
- * @head: the head that will precede our entry
- */
-static inline void list_move(struct list_head *list, struct list_head *head)
-{
- __list_del(list->prev, list->next);
- list_add(list, head);
-}
-
-/**
- * list_move_tail - delete from one list and add as another's tail
- * @list: the entry to move
- * @head: the head that will follow our entry
- */
-static inline void list_move_tail(struct list_head *list,
- struct list_head *head)
-{
- __list_del(list->prev, list->next);
- list_add_tail(list, head);
-}
-
-/**
- * list_is_last - tests whether @list is the last entry in list @head
- * @list: the entry to test
- * @head: the head of the list
- */
-static inline int list_is_last(const struct list_head *list,
- const struct list_head *head)
-{
- return list->next == head;
-}
-
-/**
- * list_empty - tests whether a list is empty
- * @head: the list to test.
- */
-static inline int list_empty(const struct list_head *head)
-{
- return head->next == head;
-}
-
-/**
- * list_empty_careful - tests whether a list is empty and not being modified
- * @head: the list to test
- *
- * Description:
- * tests whether a list is empty _and_ checks that no other CPU might be
- * in the process of modifying either member (next or prev)
- *
- * NOTE: using list_empty_careful() without synchronization
- * can only be safe if the only activity that can happen
- * to the list entry is list_del_init(). Eg. it cannot be used
- * if another CPU could re-list_add() it.
- */
-static inline int list_empty_careful(const struct list_head *head)
-{
- struct list_head *next = head->next;
- return (next == head) && (next == head->prev);
-}
-
-static inline void __list_splice(struct list_head *list,
- struct list_head *head)
-{
- struct list_head *first = list->next;
- struct list_head *last = list->prev;
- struct list_head *at = head->next;
-
- first->prev = head;
- head->next = first;
-
- last->next = at;
- at->prev = last;
-}
-
-/**
- * list_splice - join two lists
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice(struct list_head *list, struct list_head *head)
-{
- if (!list_empty(list))
- __list_splice(list, head);
-}
-
-/**
- * list_splice_init - join two lists and reinitialise the emptied list.
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * The list at @list is reinitialised
- */
-static inline void list_splice_init(struct list_head *list,
- struct list_head *head)
-{
- if (!list_empty(list)) {
- __list_splice(list, head);
- INIT_LIST_HEAD(list);
- }
-}
-
-/**
- * list_entry - get the struct for this entry
- * @ptr: the &struct list_head pointer.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
- */
-#define list_entry(ptr, type, member) \
- container_of(ptr, type, member)
-
-/**
- * list_first_entry - get the first element from a list
- * @ptr: the list head to take the element from.
- * @type: the type of the struct this is embedded in.
- * @member: the name of the list_struct within the struct.
- *
- * Note, that list is expected to be not empty.
- */
-#define list_first_entry(ptr, type, member) \
- list_entry((ptr)->next, type, member)
-
-/**
- * list_for_each - iterate over a list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- */
-#define list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); \
- pos = pos->next)
-
-/**
- * __list_for_each - iterate over a list
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- *
- * This variant differs from list_for_each() in that it's the
- * simplest possible list iteration code, no prefetching is done.
- * Use this for code that knows the list to be very short (empty
- * or 1 entry) most of the time.
- */
-#define __list_for_each(pos, head) \
- for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * list_for_each_prev - iterate over a list backwards
- * @pos: the &struct list_head to use as a loop cursor.
- * @head: the head for your list.
- */
-#define list_for_each_prev(pos, head) \
- for (pos = (head)->prev; pos != (head); \
- pos = pos->prev)
-
-/**
- * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos: the &struct list_head to use as a loop cursor.
- * @n: another &struct list_head to use as temporary storage
- * @head: the head for your list.
- */
-#define list_for_each_safe(pos, n, head) \
- for (pos = (head)->next, n = pos->next; pos != (head); \
- pos = n, n = pos->next)
-
-/**
- * list_for_each_entry - iterate over list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry(pos, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry_reverse(pos, head, member) \
- for (pos = list_entry((head)->prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue
- * @pos: the type * to use as a start point
- * @head: the head of the list
- * @member: the name of the list_struct within the struct.
- *
- * Prepares a pos entry for use as a start point in list_for_each_entry_continue.
- */
-#define list_prepare_entry(pos, head, member) \
- ((pos) ? : list_entry(head, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue - continue iteration over list of given type
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Continue to iterate over list of given type, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue(pos, head, member) \
- for (pos = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos: the type * to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing from current position.
- */
-#define list_for_each_entry_from(pos, head, member) \
- for (; &pos->member != (head); \
- pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- */
-#define list_for_each_entry_safe(pos, n, head, member) \
- for (pos = list_entry((head)->next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_continue
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing after current point,
- * safe against removal of list entry.
- */
-#define list_for_each_entry_safe_continue(pos, n, head, member) \
- for (pos = list_entry(pos->member.next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_from
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate over list of given type from current point, safe against
- * removal of list entry.
- */
-#define list_for_each_entry_safe_from(pos, n, head, member) \
- for (n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_reverse
- * @pos: the type * to use as a loop cursor.
- * @n: another type * to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
- *
- * Iterate backwards over list of given type, safe against removal
- * of list entry.
- */
-#define list_for_each_entry_safe_reverse(pos, n, head, member) \
- for (pos = list_entry((head)->prev, typeof(*pos), member), \
- n = list_entry(pos->member.prev, typeof(*pos), member); \
- &pos->member != (head); \
- pos = n, n = list_entry(n->member.prev, typeof(*n), member))
-
-/*
- * Double linked lists with a single pointer list head.
- * Mostly useful for hash tables where the two pointer list head is
- * too wasteful.
- * You lose the ability to access the tail in O(1).
- */
-
-struct hlist_head {
- struct hlist_node *first;
-};
-
-struct hlist_node {
- struct hlist_node *next, **pprev;
-};
-
-#define HLIST_HEAD_INIT { .first = NULL }
-#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL }
-#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
-static inline void INIT_HLIST_NODE(struct hlist_node *h)
-{
- h->next = NULL;
- h->pprev = NULL;
-}
-
-static inline int hlist_unhashed(const struct hlist_node *h)
-{
- return !h->pprev;
-}
-
-static inline int hlist_empty(const struct hlist_head *h)
-{
- return !h->first;
-}
-
-static inline void __hlist_del(struct hlist_node *n)
-{
- struct hlist_node *next = n->next;
- struct hlist_node **pprev = n->pprev;
- *pprev = next;
- if (next)
- next->pprev = pprev;
-}
-
-static inline void hlist_del(struct hlist_node *n)
-{
- __hlist_del(n);
- n->next = LIST_POISON1;
- n->pprev = LIST_POISON2;
-}
-
-static inline void hlist_del_init(struct hlist_node *n)
-{
- if (!hlist_unhashed(n)) {
- __hlist_del(n);
- INIT_HLIST_NODE(n);
- }
-}
-
-static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
-{
- struct hlist_node *first = h->first;
- n->next = first;
- if (first)
- first->pprev = &n->next;
- h->first = n;
- n->pprev = &h->first;
-}
-
-/* next must be != NULL */
-static inline void hlist_add_before(struct hlist_node *n,
- struct hlist_node *next)
-{
- n->pprev = next->pprev;
- n->next = next;
- next->pprev = &n->next;
- *(n->pprev) = n;
-}
-
-static inline void hlist_add_after(struct hlist_node *n,
- struct hlist_node *next)
-{
- next->next = n->next;
- n->next = next;
- next->pprev = &n->next;
-
- if(next->next)
- next->next->pprev = &next->next;
-}
-
-#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
-
-#define hlist_for_each(pos, head) \
- for (pos = (head)->first; pos; \
- pos = pos->next)
-
-#define hlist_for_each_safe(pos, n, head) \
- for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
- pos = n)
-
-/**
- * hlist_for_each_entry - iterate over list of given type
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry(tpos, pos, head, member) \
- for (pos = (head)->first; \
- pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue(tpos, pos, member) \
- for (pos = (pos)->next; \
- pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_from(tpos, pos, member) \
- for (; pos && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = pos->next)
-
-/**
- * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos: the type * to use as a loop cursor.
- * @pos: the &struct hlist_node to use as a loop cursor.
- * @n: another &struct hlist_node to use as temporary storage
- * @head: the head for your list.
- * @member: the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \
- for (pos = (head)->first; \
- pos && ({ n = pos->next; 1; }) && \
- ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
- pos = n)
-
-#endif
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
new file mode 100644
index 0000000..ddabe92
--- /dev/null
+++ b/tools/perf/util/module.c
@@ -0,0 +1,509 @@
+#include "util.h"
+#include "../perf.h"
+#include "string.h"
+#include "module.h"
+
+#include <libelf.h>
+#include <gelf.h>
+#include <elf.h>
+#include <dirent.h>
+#include <sys/utsname.h>
+
+static unsigned int crc32(const char *p, unsigned int len)
+{
+ int i;
+ unsigned int crc = 0;
+
+ while (len--) {
+ crc ^= *p++;
+ for (i = 0; i < 8; i++)
+ crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+ }
+ return crc;
+}
+
+/* module section methods */
+
+struct sec_dso *sec_dso__new_dso(const char *name)
+{
+ struct sec_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+ if (self != NULL) {
+ strcpy(self->name, name);
+ self->secs = RB_ROOT;
+ self->find_section = sec_dso__find_section;
+ }
+
+ return self;
+}
+
+static void sec_dso__delete_section(struct section *self)
+{
+ free(((void *)self));
+}
+
+void sec_dso__delete_sections(struct sec_dso *self)
+{
+ struct section *pos;
+ struct rb_node *next = rb_first(&self->secs);
+
+ while (next) {
+ pos = rb_entry(next, struct section, rb_node);
+ next = rb_next(&pos->rb_node);
+ rb_erase(&pos->rb_node, &self->secs);
+ sec_dso__delete_section(pos);
+ }
+}
+
+void sec_dso__delete_self(struct sec_dso *self)
+{
+ sec_dso__delete_sections(self);
+ free(self);
+}
+
+static void sec_dso__insert_section(struct sec_dso *self, struct section *sec)
+{
+ struct rb_node **p = &self->secs.rb_node;
+ struct rb_node *parent = NULL;
+ const u64 hash = sec->hash;
+ struct section *s;
+
+ while (*p != NULL) {
+ parent = *p;
+ s = rb_entry(parent, struct section, rb_node);
+ if (hash < s->hash)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&sec->rb_node, parent, p);
+ rb_insert_color(&sec->rb_node, &self->secs);
+}
+
+struct section *sec_dso__find_section(struct sec_dso *self, const char *name)
+{
+ struct rb_node *n;
+ u64 hash;
+ int len;
+
+ if (self == NULL)
+ return NULL;
+
+ len = strlen(name);
+ hash = crc32(name, len);
+
+ n = self->secs.rb_node;
+
+ while (n) {
+ struct section *s = rb_entry(n, struct section, rb_node);
+
+ if (hash < s->hash)
+ n = n->rb_left;
+ else if (hash > s->hash)
+ n = n->rb_right;
+ else {
+ if (!strcmp(name, s->name))
+ return s;
+ else
+ n = rb_next(&s->rb_node);
+ }
+ }
+
+ return NULL;
+}
+
+static size_t sec_dso__fprintf_section(struct section *self, FILE *fp)
+{
+ return fprintf(fp, "name:%s vma:%llx path:%s\n",
+ self->name, self->vma, self->path);
+}
+
+size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp)
+{
+ size_t ret = fprintf(fp, "dso: %s\n", self->name);
+
+ struct rb_node *nd;
+ for (nd = rb_first(&self->secs); nd; nd = rb_next(nd)) {
+ struct section *pos = rb_entry(nd, struct section, rb_node);
+ ret += sec_dso__fprintf_section(pos, fp);
+ }
+
+ return ret;
+}
+
+static struct section *section__new(const char *name, const char *path)
+{
+ struct section *self = calloc(1, sizeof(*self));
+
+ if (!self)
+ goto out_failure;
+
+ self->name = calloc(1, strlen(name) + 1);
+ if (!self->name)
+ goto out_failure;
+
+ self->path = calloc(1, strlen(path) + 1);
+ if (!self->path)
+ goto out_failure;
+
+ strcpy(self->name, name);
+ strcpy(self->path, path);
+ self->hash = crc32(self->name, strlen(name));
+
+ return self;
+
+out_failure:
+ if (self) {
+ if (self->name)
+ free(self->name);
+ if (self->path)
+ free(self->path);
+ free(self);
+ }
+
+ return NULL;
+}
+
+/* module methods */
+
+struct mod_dso *mod_dso__new_dso(const char *name)
+{
+ struct mod_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
+
+ if (self != NULL) {
+ strcpy(self->name, name);
+ self->mods = RB_ROOT;
+ self->find_module = mod_dso__find_module;
+ }
+
+ return self;
+}
+
+static void mod_dso__delete_module(struct module *self)
+{
+ free(((void *)self));
+}
+
+void mod_dso__delete_modules(struct mod_dso *self)
+{
+ struct module *pos;
+ struct rb_node *next = rb_first(&self->mods);
+
+ while (next) {
+ pos = rb_entry(next, struct module, rb_node);
+ next = rb_next(&pos->rb_node);
+ rb_erase(&pos->rb_node, &self->mods);
+ mod_dso__delete_module(pos);
+ }
+}
+
+void mod_dso__delete_self(struct mod_dso *self)
+{
+ mod_dso__delete_modules(self);
+ free(self);
+}
+
+static void mod_dso__insert_module(struct mod_dso *self, struct module *mod)
+{
+ struct rb_node **p = &self->mods.rb_node;
+ struct rb_node *parent = NULL;
+ const u64 hash = mod->hash;
+ struct module *m;
+
+ while (*p != NULL) {
+ parent = *p;
+ m = rb_entry(parent, struct module, rb_node);
+ if (hash < m->hash)
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&mod->rb_node, parent, p);
+ rb_insert_color(&mod->rb_node, &self->mods);
+}
+
+struct module *mod_dso__find_module(struct mod_dso *self, const char *name)
+{
+ struct rb_node *n;
+ u64 hash;
+ int len;
+
+ if (self == NULL)
+ return NULL;
+
+ len = strlen(name);
+ hash = crc32(name, len);
+
+ n = self->mods.rb_node;
+
+ while (n) {
+ struct module *m = rb_entry(n, struct module, rb_node);
+
+ if (hash < m->hash)
+ n = n->rb_left;
+ else if (hash > m->hash)
+ n = n->rb_right;
+ else {
+ if (!strcmp(name, m->name))
+ return m;
+ else
+ n = rb_next(&m->rb_node);
+ }
+ }
+
+ return NULL;
+}
+
+static size_t mod_dso__fprintf_module(struct module *self, FILE *fp)
+{
+ return fprintf(fp, "name:%s path:%s\n", self->name, self->path);
+}
+
+size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp)
+{
+ struct rb_node *nd;
+ size_t ret;
+
+ ret = fprintf(fp, "dso: %s\n", self->name);
+
+ for (nd = rb_first(&self->mods); nd; nd = rb_next(nd)) {
+ struct module *pos = rb_entry(nd, struct module, rb_node);
+
+ ret += mod_dso__fprintf_module(pos, fp);
+ }
+
+ return ret;
+}
+
+static struct module *module__new(const char *name, const char *path)
+{
+ struct module *self = calloc(1, sizeof(*self));
+
+ if (!self)
+ goto out_failure;
+
+ self->name = calloc(1, strlen(name) + 1);
+ if (!self->name)
+ goto out_failure;
+
+ self->path = calloc(1, strlen(path) + 1);
+ if (!self->path)
+ goto out_failure;
+
+ strcpy(self->name, name);
+ strcpy(self->path, path);
+ self->hash = crc32(self->name, strlen(name));
+
+ return self;
+
+out_failure:
+ if (self) {
+ if (self->name)
+ free(self->name);
+ if (self->path)
+ free(self->path);
+ free(self);
+ }
+
+ return NULL;
+}
+
+static int mod_dso__load_sections(struct module *mod)
+{
+ int count = 0, path_len;
+ struct dirent *entry;
+ char *line = NULL;
+ char *dir_path;
+ DIR *dir;
+ size_t n;
+
+ path_len = strlen("/sys/module/");
+ path_len += strlen(mod->name);
+ path_len += strlen("/sections/");
+
+ dir_path = calloc(1, path_len + 1);
+ if (dir_path == NULL)
+ goto out_failure;
+
+ strcat(dir_path, "/sys/module/");
+ strcat(dir_path, mod->name);
+ strcat(dir_path, "/sections/");
+
+ dir = opendir(dir_path);
+ if (dir == NULL)
+ goto out_free;
+
+ while ((entry = readdir(dir))) {
+ struct section *section;
+ char *path, *vma;
+ int line_len;
+ FILE *file;
+
+ if (!strcmp(".", entry->d_name) || !strcmp("..", entry->d_name))
+ continue;
+
+ path = calloc(1, path_len + strlen(entry->d_name) + 1);
+ if (path == NULL)
+ break;
+ strcat(path, dir_path);
+ strcat(path, entry->d_name);
+
+ file = fopen(path, "r");
+ if (file == NULL) {
+ free(path);
+ break;
+ }
+
+ line_len = getline(&line, &n, file);
+ if (line_len < 0) {
+ free(path);
+ fclose(file);
+ break;
+ }
+
+ if (!line) {
+ free(path);
+ fclose(file);
+ break;
+ }
+
+ line[--line_len] = '\0'; /* \n */
+
+ vma = strstr(line, "0x");
+ if (!vma) {
+ free(path);
+ fclose(file);
+ break;
+ }
+ vma += 2;
+
+ section = section__new(entry->d_name, path);
+ if (!section) {
+ fprintf(stderr, "load_sections: allocation error\n");
+ free(path);
+ fclose(file);
+ break;
+ }
+
+ hex2u64(vma, §ion->vma);
+ sec_dso__insert_section(mod->sections, section);
+
+ free(path);
+ fclose(file);
+ count++;
+ }
+
+ closedir(dir);
+ free(line);
+ free(dir_path);
+
+ return count;
+
+out_free:
+ free(dir_path);
+
+out_failure:
+ return count;
+}
+
+static int mod_dso__load_module_paths(struct mod_dso *self)
+{
+ struct utsname uts;
+ int count = 0, len;
+ char *line = NULL;
+ FILE *file;
+ char *path;
+ size_t n;
+
+ if (uname(&uts) < 0)
+ goto out_failure;
+
+ len = strlen("/lib/modules/");
+ len += strlen(uts.release);
+ len += strlen("/modules.dep");
+
+ path = calloc(1, len);
+ if (path == NULL)
+ goto out_failure;
+
+ strcat(path, "/lib/modules/");
+ strcat(path, uts.release);
+ strcat(path, "/modules.dep");
+
+ file = fopen(path, "r");
+ free(path);
+ if (file == NULL)
+ goto out_failure;
+
+ while (!feof(file)) {
+ char *path, *name, *tmp;
+ struct module *module;
+ int line_len, len;
+
+ line_len = getline(&line, &n, file);
+ if (line_len < 0)
+ break;
+
+ if (!line)
+ goto out_failure;
+
+ line[--line_len] = '\0'; /* \n */
+
+ path = strtok(line, ":");
+ if (!path)
+ goto out_failure;
+
+ name = strdup(path);
+ name = strtok(name, "/");
+
+ tmp = name;
+
+ while (tmp) {
+ tmp = strtok(NULL, "/");
+ if (tmp)
+ name = tmp;
+ }
+ name = strsep(&name, ".");
+
+ /* Quirk: replace '-' with '_' in sound modules */
+ for (len = strlen(name); len; len--) {
+ if (*(name+len) == '-')
+ *(name+len) = '_';
+ }
+
+ module = module__new(name, path);
+ if (!module) {
+ fprintf(stderr, "load_module_paths: allocation error\n");
+ goto out_failure;
+ }
+ mod_dso__insert_module(self, module);
+
+ module->sections = sec_dso__new_dso("sections");
+ if (!module->sections) {
+ fprintf(stderr, "load_module_paths: allocation error\n");
+ goto out_failure;
+ }
+
+ module->active = mod_dso__load_sections(module);
+
+ if (module->active > 0)
+ count++;
+ }
+
+ free(line);
+ fclose(file);
+
+ return count;
+
+out_failure:
+ return -1;
+}
+
+int mod_dso__load_modules(struct mod_dso *dso)
+{
+ int err;
+
+ err = mod_dso__load_module_paths(dso);
+
+ return err;
+}
diff --git a/tools/perf/util/module.h b/tools/perf/util/module.h
new file mode 100644
index 0000000..8a592ef
--- /dev/null
+++ b/tools/perf/util/module.h
@@ -0,0 +1,53 @@
+#ifndef _PERF_MODULE_
+#define _PERF_MODULE_ 1
+
+#include <linux/types.h>
+#include "../types.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+
+struct section {
+ struct rb_node rb_node;
+ u64 hash;
+ u64 vma;
+ char *name;
+ char *path;
+};
+
+struct sec_dso {
+ struct list_head node;
+ struct rb_root secs;
+ struct section *(*find_section)(struct sec_dso *, const char *name);
+ char name[0];
+};
+
+struct module {
+ struct rb_node rb_node;
+ u64 hash;
+ char *name;
+ char *path;
+ struct sec_dso *sections;
+ int active;
+};
+
+struct mod_dso {
+ struct list_head node;
+ struct rb_root mods;
+ struct module *(*find_module)(struct mod_dso *, const char *name);
+ char name[0];
+};
+
+struct sec_dso *sec_dso__new_dso(const char *name);
+void sec_dso__delete_sections(struct sec_dso *self);
+void sec_dso__delete_self(struct sec_dso *self);
+size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp);
+struct section *sec_dso__find_section(struct sec_dso *self, const char *name);
+
+struct mod_dso *mod_dso__new_dso(const char *name);
+void mod_dso__delete_modules(struct mod_dso *self);
+void mod_dso__delete_self(struct mod_dso *self);
+size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp);
+struct module *mod_dso__find_module(struct mod_dso *self, const char *name);
+int mod_dso__load_modules(struct mod_dso *dso);
+
+#endif /* _PERF_MODULE_ */
diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c
index a28bcca..1915de2 100644
--- a/tools/perf/util/pager.c
+++ b/tools/perf/util/pager.c
@@ -9,7 +9,6 @@
static int spawned_pager;
-#ifndef __MINGW32__
static void pager_preexec(void)
{
/*
@@ -24,7 +23,6 @@
setenv("LESS", "FRSX", 0);
}
-#endif
static const char *pager_argv[] = { "sh", "-c", NULL, NULL };
static struct child_process pager_process;
@@ -70,9 +68,8 @@
pager_argv[2] = pager;
pager_process.argv = pager_argv;
pager_process.in = -1;
-#ifndef __MINGW32__
pager_process.preexec_cb = pager_preexec;
-#endif
+
if (start_command(&pager_process))
return;
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 35d04da..0441784 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -5,6 +5,7 @@
#include "parse-events.h"
#include "exec_cmd.h"
#include "string.h"
+#include "cache.h"
extern char *strcasestr(const char *haystack, const char *needle);
@@ -16,32 +17,30 @@
u8 type;
u64 config;
char *symbol;
+ char *alias;
};
-#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y
-#define CR(x, y) .type = PERF_TYPE_##x, .config = y
+char debugfs_path[MAXPATHLEN];
+
+#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
+#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
static struct event_symbol event_symbols[] = {
- { C(HARDWARE, HW_CPU_CYCLES), "cpu-cycles", },
- { C(HARDWARE, HW_CPU_CYCLES), "cycles", },
- { C(HARDWARE, HW_INSTRUCTIONS), "instructions", },
- { C(HARDWARE, HW_CACHE_REFERENCES), "cache-references", },
- { C(HARDWARE, HW_CACHE_MISSES), "cache-misses", },
- { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions", },
- { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches", },
- { C(HARDWARE, HW_BRANCH_MISSES), "branch-misses", },
- { C(HARDWARE, HW_BUS_CYCLES), "bus-cycles", },
+ { CHW(CPU_CYCLES), "cpu-cycles", "cycles" },
+ { CHW(INSTRUCTIONS), "instructions", "" },
+ { CHW(CACHE_REFERENCES), "cache-references", "" },
+ { CHW(CACHE_MISSES), "cache-misses", "" },
+ { CHW(BRANCH_INSTRUCTIONS), "branch-instructions", "branches" },
+ { CHW(BRANCH_MISSES), "branch-misses", "" },
+ { CHW(BUS_CYCLES), "bus-cycles", "" },
- { C(SOFTWARE, SW_CPU_CLOCK), "cpu-clock", },
- { C(SOFTWARE, SW_TASK_CLOCK), "task-clock", },
- { C(SOFTWARE, SW_PAGE_FAULTS), "page-faults", },
- { C(SOFTWARE, SW_PAGE_FAULTS), "faults", },
- { C(SOFTWARE, SW_PAGE_FAULTS_MIN), "minor-faults", },
- { C(SOFTWARE, SW_PAGE_FAULTS_MAJ), "major-faults", },
- { C(SOFTWARE, SW_CONTEXT_SWITCHES), "context-switches", },
- { C(SOFTWARE, SW_CONTEXT_SWITCHES), "cs", },
- { C(SOFTWARE, SW_CPU_MIGRATIONS), "cpu-migrations", },
- { C(SOFTWARE, SW_CPU_MIGRATIONS), "migrations", },
+ { CSW(CPU_CLOCK), "cpu-clock", "" },
+ { CSW(TASK_CLOCK), "task-clock", "" },
+ { CSW(PAGE_FAULTS), "page-faults", "faults" },
+ { CSW(PAGE_FAULTS_MIN), "minor-faults", "" },
+ { CSW(PAGE_FAULTS_MAJ), "major-faults", "" },
+ { CSW(CONTEXT_SWITCHES), "context-switches", "cs" },
+ { CSW(CPU_MIGRATIONS), "cpu-migrations", "migrations" },
};
#define __PERF_COUNTER_FIELD(config, name) \
@@ -74,33 +73,181 @@
#define MAX_ALIASES 8
-static char *hw_cache [][MAX_ALIASES] = {
- { "L1-data" , "l1-d", "l1d" },
- { "L1-instruction" , "l1-i", "l1i" },
- { "L2" , "l2" },
- { "Data-TLB" , "dtlb", "d-tlb" },
- { "Instruction-TLB" , "itlb", "i-tlb" },
- { "Branch" , "bpu" , "btb", "bpc" },
+static char *hw_cache[][MAX_ALIASES] = {
+ { "L1-dcache", "l1-d", "l1d", "L1-data", },
+ { "L1-icache", "l1-i", "l1i", "L1-instruction", },
+ { "LLC", "L2" },
+ { "dTLB", "d-tlb", "Data-TLB", },
+ { "iTLB", "i-tlb", "Instruction-TLB", },
+ { "branch", "branches", "bpu", "btb", "bpc", },
};
-static char *hw_cache_op [][MAX_ALIASES] = {
- { "Load" , "read" },
- { "Store" , "write" },
- { "Prefetch" , "speculative-read", "speculative-load" },
+static char *hw_cache_op[][MAX_ALIASES] = {
+ { "load", "loads", "read", },
+ { "store", "stores", "write", },
+ { "prefetch", "prefetches", "speculative-read", "speculative-load", },
};
-static char *hw_cache_result [][MAX_ALIASES] = {
- { "Reference" , "ops", "access" },
- { "Miss" },
+static char *hw_cache_result[][MAX_ALIASES] = {
+ { "refs", "Reference", "ops", "access", },
+ { "misses", "miss", },
};
+#define C(x) PERF_COUNT_HW_CACHE_##x
+#define CACHE_READ (1 << C(OP_READ))
+#define CACHE_WRITE (1 << C(OP_WRITE))
+#define CACHE_PREFETCH (1 << C(OP_PREFETCH))
+#define COP(x) (1 << x)
+
+/*
+ * cache operartion stat
+ * L1I : Read and prefetch only
+ * ITLB and BPU : Read-only
+ */
+static unsigned long hw_cache_stat[C(MAX)] = {
+ [C(L1D)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(L1I)] = (CACHE_READ | CACHE_PREFETCH),
+ [C(LL)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(DTLB)] = (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(ITLB)] = (CACHE_READ),
+ [C(BPU)] = (CACHE_READ),
+};
+
+#define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st) \
+ while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next) \
+ if (snprintf(file, MAXPATHLEN, "%s/%s", debugfs_path, \
+ sys_dirent.d_name) && \
+ (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \
+ (strcmp(sys_dirent.d_name, ".")) && \
+ (strcmp(sys_dirent.d_name, "..")))
+
+static int tp_event_has_id(struct dirent *sys_dir, struct dirent *evt_dir)
+{
+ char evt_path[MAXPATHLEN];
+ int fd;
+
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+ sys_dir->d_name, evt_dir->d_name);
+ fd = open(evt_path, O_RDONLY);
+ if (fd < 0)
+ return -EINVAL;
+ close(fd);
+
+ return 0;
+}
+
+#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st) \
+ while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next) \
+ if (snprintf(file, MAXPATHLEN, "%s/%s/%s", debugfs_path, \
+ sys_dirent.d_name, evt_dirent.d_name) && \
+ (!stat(file, &st)) && (S_ISDIR(st.st_mode)) && \
+ (strcmp(evt_dirent.d_name, ".")) && \
+ (strcmp(evt_dirent.d_name, "..")) && \
+ (!tp_event_has_id(&sys_dirent, &evt_dirent)))
+
+#define MAX_EVENT_LENGTH 30
+
+int valid_debugfs_mount(const char *debugfs)
+{
+ struct statfs st_fs;
+
+ if (statfs(debugfs, &st_fs) < 0)
+ return -ENOENT;
+ else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
+ return -ENOENT;
+ return 0;
+}
+
+static char *tracepoint_id_to_name(u64 config)
+{
+ static char tracepoint_name[2 * MAX_EVENT_LENGTH];
+ DIR *sys_dir, *evt_dir;
+ struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+ struct stat st;
+ char id_buf[4];
+ int fd;
+ u64 id;
+ char evt_path[MAXPATHLEN];
+
+ if (valid_debugfs_mount(debugfs_path))
+ return "unkown";
+
+ sys_dir = opendir(debugfs_path);
+ if (!sys_dir)
+ goto cleanup;
+
+ for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+ evt_dir = opendir(evt_path);
+ if (!evt_dir)
+ goto cleanup;
+ for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+ evt_path, st) {
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id",
+ debugfs_path, sys_dirent.d_name,
+ evt_dirent.d_name);
+ fd = open(evt_path, O_RDONLY);
+ if (fd < 0)
+ continue;
+ if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+ close(fd);
+ continue;
+ }
+ close(fd);
+ id = atoll(id_buf);
+ if (id == config) {
+ closedir(evt_dir);
+ closedir(sys_dir);
+ snprintf(tracepoint_name, 2 * MAX_EVENT_LENGTH,
+ "%s:%s", sys_dirent.d_name,
+ evt_dirent.d_name);
+ return tracepoint_name;
+ }
+ }
+ closedir(evt_dir);
+ }
+
+cleanup:
+ closedir(sys_dir);
+ return "unkown";
+}
+
+static int is_cache_op_valid(u8 cache_type, u8 cache_op)
+{
+ if (hw_cache_stat[cache_type] & COP(cache_op))
+ return 1; /* valid */
+ else
+ return 0; /* invalid */
+}
+
+static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result)
+{
+ static char name[50];
+
+ if (cache_result) {
+ sprintf(name, "%s-%s-%s", hw_cache[cache_type][0],
+ hw_cache_op[cache_op][0],
+ hw_cache_result[cache_result][0]);
+ } else {
+ sprintf(name, "%s-%s", hw_cache[cache_type][0],
+ hw_cache_op[cache_op][1]);
+ }
+
+ return name;
+}
+
char *event_name(int counter)
{
u64 config = attrs[counter].config;
int type = attrs[counter].type;
+
+ return __event_name(type, config);
+}
+
+char *__event_name(int type, u64 config)
+{
static char buf[32];
- if (attrs[counter].type == PERF_TYPE_RAW) {
+ if (type == PERF_TYPE_RAW) {
sprintf(buf, "raw 0x%llx", config);
return buf;
}
@@ -113,7 +260,6 @@
case PERF_TYPE_HW_CACHE: {
u8 cache_type, cache_op, cache_result;
- static char name[100];
cache_type = (config >> 0) & 0xff;
if (cache_type > PERF_COUNT_HW_CACHE_MAX)
@@ -127,12 +273,10 @@
if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX)
return "unknown-ext-hardware-cache-result";
- sprintf(name, "%s-Cache-%s-%ses",
- hw_cache[cache_type][0],
- hw_cache_op[cache_op][0],
- hw_cache_result[cache_result][0]);
+ if (!is_cache_op_valid(cache_type, cache_op))
+ return "invalid-cache";
- return name;
+ return event_cache_name(cache_type, cache_op, cache_result);
}
case PERF_TYPE_SOFTWARE:
@@ -140,6 +284,9 @@
return sw_event_names[config];
return "unknown-software";
+ case PERF_TYPE_TRACEPOINT:
+ return tracepoint_id_to_name(config);
+
default:
break;
}
@@ -147,43 +294,74 @@
return "unknown";
}
-static int parse_aliases(const char *str, char *names[][MAX_ALIASES], int size)
+static int parse_aliases(const char **str, char *names[][MAX_ALIASES], int size)
{
int i, j;
+ int n, longest = -1;
for (i = 0; i < size; i++) {
- for (j = 0; j < MAX_ALIASES; j++) {
- if (!names[i][j])
- break;
- if (strcasestr(str, names[i][j]))
- return i;
+ for (j = 0; j < MAX_ALIASES && names[i][j]; j++) {
+ n = strlen(names[i][j]);
+ if (n > longest && !strncasecmp(*str, names[i][j], n))
+ longest = n;
+ }
+ if (longest > 0) {
+ *str += longest;
+ return i;
}
}
return -1;
}
-static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr)
+static int
+parse_generic_hw_event(const char **str, struct perf_counter_attr *attr)
{
- int cache_type = -1, cache_op = 0, cache_result = 0;
+ const char *s = *str;
+ int cache_type = -1, cache_op = -1, cache_result = -1;
- cache_type = parse_aliases(str, hw_cache, PERF_COUNT_HW_CACHE_MAX);
+ cache_type = parse_aliases(&s, hw_cache, PERF_COUNT_HW_CACHE_MAX);
/*
* No fallback - if we cannot get a clear cache type
* then bail out:
*/
if (cache_type == -1)
- return -EINVAL;
+ return 0;
- cache_op = parse_aliases(str, hw_cache_op, PERF_COUNT_HW_CACHE_OP_MAX);
+ while ((cache_op == -1 || cache_result == -1) && *s == '-') {
+ ++s;
+
+ if (cache_op == -1) {
+ cache_op = parse_aliases(&s, hw_cache_op,
+ PERF_COUNT_HW_CACHE_OP_MAX);
+ if (cache_op >= 0) {
+ if (!is_cache_op_valid(cache_type, cache_op))
+ return 0;
+ continue;
+ }
+ }
+
+ if (cache_result == -1) {
+ cache_result = parse_aliases(&s, hw_cache_result,
+ PERF_COUNT_HW_CACHE_RESULT_MAX);
+ if (cache_result >= 0)
+ continue;
+ }
+
+ /*
+ * Can't parse this as a cache op or result, so back up
+ * to the '-'.
+ */
+ --s;
+ break;
+ }
+
/*
* Fall back to reads:
*/
if (cache_op == -1)
cache_op = PERF_COUNT_HW_CACHE_OP_READ;
- cache_result = parse_aliases(str, hw_cache_result,
- PERF_COUNT_HW_CACHE_RESULT_MAX);
/*
* Fall back to accesses:
*/
@@ -193,6 +371,167 @@
attr->config = cache_type | (cache_op << 8) | (cache_result << 16);
attr->type = PERF_TYPE_HW_CACHE;
+ *str = s;
+ return 1;
+}
+
+static int parse_tracepoint_event(const char **strp,
+ struct perf_counter_attr *attr)
+{
+ const char *evt_name;
+ char *flags;
+ char sys_name[MAX_EVENT_LENGTH];
+ char id_buf[4];
+ int fd;
+ unsigned int sys_length, evt_length;
+ u64 id;
+ char evt_path[MAXPATHLEN];
+
+ if (valid_debugfs_mount(debugfs_path))
+ return 0;
+
+ evt_name = strchr(*strp, ':');
+ if (!evt_name)
+ return 0;
+
+ sys_length = evt_name - *strp;
+ if (sys_length >= MAX_EVENT_LENGTH)
+ return 0;
+
+ strncpy(sys_name, *strp, sys_length);
+ sys_name[sys_length] = '\0';
+ evt_name = evt_name + 1;
+
+ flags = strchr(evt_name, ':');
+ if (flags) {
+ *flags = '\0';
+ flags++;
+ if (!strncmp(flags, "record", strlen(flags)))
+ attr->sample_type |= PERF_SAMPLE_RAW;
+ }
+
+ evt_length = strlen(evt_name);
+ if (evt_length >= MAX_EVENT_LENGTH)
+ return 0;
+
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+ sys_name, evt_name);
+ fd = open(evt_path, O_RDONLY);
+ if (fd < 0)
+ return 0;
+
+ if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+ close(fd);
+ return 0;
+ }
+ close(fd);
+ id = atoll(id_buf);
+ attr->config = id;
+ attr->type = PERF_TYPE_TRACEPOINT;
+ *strp = evt_name + evt_length;
+ return 1;
+}
+
+static int check_events(const char *str, unsigned int i)
+{
+ int n;
+
+ n = strlen(event_symbols[i].symbol);
+ if (!strncmp(str, event_symbols[i].symbol, n))
+ return n;
+
+ n = strlen(event_symbols[i].alias);
+ if (n)
+ if (!strncmp(str, event_symbols[i].alias, n))
+ return n;
+ return 0;
+}
+
+static int
+parse_symbolic_event(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ unsigned int i;
+ int n;
+
+ for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
+ n = check_events(str, i);
+ if (n > 0) {
+ attr->type = event_symbols[i].type;
+ attr->config = event_symbols[i].config;
+ *strp = str + n;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int parse_raw_event(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ u64 config;
+ int n;
+
+ if (*str != 'r')
+ return 0;
+ n = hex2u64(str + 1, &config);
+ if (n > 0) {
+ *strp = str + n + 1;
+ attr->type = PERF_TYPE_RAW;
+ attr->config = config;
+ return 1;
+ }
+ return 0;
+}
+
+static int
+parse_numeric_event(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ char *endp;
+ unsigned long type;
+ u64 config;
+
+ type = strtoul(str, &endp, 0);
+ if (endp > str && type < PERF_TYPE_MAX && *endp == ':') {
+ str = endp + 1;
+ config = strtoul(str, &endp, 0);
+ if (endp > str) {
+ attr->type = type;
+ attr->config = config;
+ *strp = endp;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int
+parse_event_modifier(const char **strp, struct perf_counter_attr *attr)
+{
+ const char *str = *strp;
+ int eu = 1, ek = 1, eh = 1;
+
+ if (*str++ != ':')
+ return 0;
+ while (*str) {
+ if (*str == 'u')
+ eu = 0;
+ else if (*str == 'k')
+ ek = 0;
+ else if (*str == 'h')
+ eh = 0;
+ else
+ break;
+ ++str;
+ }
+ if (str >= *strp + 2) {
+ *strp = str;
+ attr->exclude_user = eu;
+ attr->exclude_kernel = ek;
+ attr->exclude_hv = eh;
+ return 1;
+ }
return 0;
}
@@ -200,75 +539,44 @@
* Each event can have multiple symbolic names.
* Symbolic names are (almost) exactly matched.
*/
-static int parse_event_symbols(const char *str, struct perf_counter_attr *attr)
+static int parse_event_symbols(const char **str, struct perf_counter_attr *attr)
{
- u64 config, id;
- int type;
- unsigned int i;
- const char *sep, *pstr;
-
- if (str[0] == 'r' && hex2u64(str + 1, &config) > 0) {
- attr->type = PERF_TYPE_RAW;
- attr->config = config;
-
+ if (!(parse_tracepoint_event(str, attr) ||
+ parse_raw_event(str, attr) ||
+ parse_numeric_event(str, attr) ||
+ parse_symbolic_event(str, attr) ||
+ parse_generic_hw_event(str, attr)))
return 0;
- }
- pstr = str;
- sep = strchr(pstr, ':');
- if (sep) {
- type = atoi(pstr);
- pstr = sep + 1;
- id = atoi(pstr);
- sep = strchr(pstr, ':');
- if (sep) {
- pstr = sep + 1;
- if (strchr(pstr, 'k'))
- attr->exclude_user = 1;
- if (strchr(pstr, 'u'))
- attr->exclude_kernel = 1;
- }
- attr->type = type;
- attr->config = id;
+ parse_event_modifier(str, attr);
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
- if (!strncmp(str, event_symbols[i].symbol,
- strlen(event_symbols[i].symbol))) {
-
- attr->type = event_symbols[i].type;
- attr->config = event_symbols[i].config;
-
- return 0;
- }
- }
-
- return parse_generic_hw_symbols(str, attr);
+ return 1;
}
-int parse_events(const struct option *opt, const char *str, int unset)
+int parse_events(const struct option *opt __used, const char *str, int unset __used)
{
struct perf_counter_attr attr;
- int ret;
- memset(&attr, 0, sizeof(attr));
-again:
- if (nr_counters == MAX_COUNTERS)
- return -1;
+ for (;;) {
+ if (nr_counters == MAX_COUNTERS)
+ return -1;
- ret = parse_event_symbols(str, &attr);
- if (ret < 0)
- return ret;
+ memset(&attr, 0, sizeof(attr));
+ if (!parse_event_symbols(&str, &attr))
+ return -1;
- attrs[nr_counters] = attr;
- nr_counters++;
+ if (!(*str == 0 || *str == ',' || isspace(*str)))
+ return -1;
- str = strstr(str, ",");
- if (str) {
- str++;
- goto again;
+ attrs[nr_counters] = attr;
+ nr_counters++;
+
+ if (*str == 0)
+ break;
+ if (*str == ',')
+ ++str;
+ while (isspace(*str))
+ ++str;
}
return 0;
@@ -283,34 +591,92 @@
};
/*
+ * Print the events from <debugfs_mount_point>/tracing/events
+ */
+
+static void print_tracepoint_events(void)
+{
+ DIR *sys_dir, *evt_dir;
+ struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+ struct stat st;
+ char evt_path[MAXPATHLEN];
+
+ if (valid_debugfs_mount(debugfs_path))
+ return;
+
+ sys_dir = opendir(debugfs_path);
+ if (!sys_dir)
+ goto cleanup;
+
+ for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+ evt_dir = opendir(evt_path);
+ if (!evt_dir)
+ goto cleanup;
+ for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+ evt_path, st) {
+ snprintf(evt_path, MAXPATHLEN, "%s:%s",
+ sys_dirent.d_name, evt_dirent.d_name);
+ fprintf(stderr, " %-40s [%s]\n", evt_path,
+ event_type_descriptors[PERF_TYPE_TRACEPOINT+1]);
+ }
+ closedir(evt_dir);
+ }
+
+cleanup:
+ closedir(sys_dir);
+}
+
+/*
* Print the help text for the event symbols:
*/
void print_events(void)
{
struct event_symbol *syms = event_symbols;
- unsigned int i, type, prev_type = -1;
+ unsigned int i, type, op, prev_type = -1;
+ char name[40];
fprintf(stderr, "\n");
fprintf(stderr, "List of pre-defined events (to be used in -e):\n");
for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
type = syms->type + 1;
- if (type > ARRAY_SIZE(event_type_descriptors))
+ if (type >= ARRAY_SIZE(event_type_descriptors))
type = 0;
if (type != prev_type)
fprintf(stderr, "\n");
- fprintf(stderr, " %-30s [%s]\n", syms->symbol,
+ if (strlen(syms->alias))
+ sprintf(name, "%s OR %s", syms->symbol, syms->alias);
+ else
+ strcpy(name, syms->symbol);
+ fprintf(stderr, " %-40s [%s]\n", name,
event_type_descriptors[type]);
prev_type = type;
}
fprintf(stderr, "\n");
- fprintf(stderr, " %-30s [raw hardware event descriptor]\n",
+ for (type = 0; type < PERF_COUNT_HW_CACHE_MAX; type++) {
+ for (op = 0; op < PERF_COUNT_HW_CACHE_OP_MAX; op++) {
+ /* skip invalid cache type */
+ if (!is_cache_op_valid(type, op))
+ continue;
+
+ for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
+ fprintf(stderr, " %-40s [%s]\n",
+ event_cache_name(type, op, i),
+ event_type_descriptors[4]);
+ }
+ }
+ }
+
+ fprintf(stderr, "\n");
+ fprintf(stderr, " %-40s [raw hardware event descriptor]\n",
"rNNN");
fprintf(stderr, "\n");
+ print_tracepoint_events();
+
exit(129);
}
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index e3d5529..192a962 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -3,11 +3,14 @@
* Parse symbolic events/counts passed in as options:
*/
+struct option;
+
extern int nr_counters;
extern struct perf_counter_attr attrs[MAX_COUNTERS];
extern char *event_name(int ctr);
+extern char *__event_name(int type, u64 config);
extern int parse_events(const struct option *opt, const char *str, int unset);
@@ -15,3 +18,6 @@
extern void print_events(void);
+extern char debugfs_path[];
+extern int valid_debugfs_mount(const char *debugfs);
+
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index b3affb1..1bf6719 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -20,7 +20,8 @@
if (p->opt) {
*arg = p->opt;
p->opt = NULL;
- } else if (p->argc == 1 && (opt->flags & PARSE_OPT_LASTARG_DEFAULT)) {
+ } else if ((opt->flags & PARSE_OPT_LASTARG_DEFAULT) && (p->argc == 1 ||
+ **(p->argv + 1) == '-')) {
*arg = (const char *)opt->defval;
} else if (p->argc > 1) {
p->argc--;
@@ -485,7 +486,7 @@
}
-int parse_opt_verbosity_cb(const struct option *opt, const char *arg,
+int parse_opt_verbosity_cb(const struct option *opt, const char *arg __used,
int unset)
{
int *target = opt->value;
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index a1039a6..8aa3464 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -90,21 +90,22 @@
intptr_t defval;
};
-#define OPT_END() { OPTION_END }
-#define OPT_ARGUMENT(l, h) { OPTION_ARGUMENT, 0, (l), NULL, NULL, (h) }
-#define OPT_GROUP(h) { OPTION_GROUP, 0, NULL, NULL, NULL, (h) }
-#define OPT_BIT(s, l, v, h, b) { OPTION_BIT, (s), (l), (v), NULL, (h), 0, NULL, (b) }
-#define OPT_BOOLEAN(s, l, v, h) { OPTION_BOOLEAN, (s), (l), (v), NULL, (h) }
-#define OPT_SET_INT(s, l, v, h, i) { OPTION_SET_INT, (s), (l), (v), NULL, (h), 0, NULL, (i) }
-#define OPT_SET_PTR(s, l, v, h, p) { OPTION_SET_PTR, (s), (l), (v), NULL, (h), 0, NULL, (p) }
-#define OPT_INTEGER(s, l, v, h) { OPTION_INTEGER, (s), (l), (v), NULL, (h) }
-#define OPT_LONG(s, l, v, h) { OPTION_LONG, (s), (l), (v), NULL, (h) }
-#define OPT_STRING(s, l, v, a, h) { OPTION_STRING, (s), (l), (v), (a), (h) }
+#define OPT_END() { .type = OPTION_END }
+#define OPT_ARGUMENT(l, h) { .type = OPTION_ARGUMENT, .long_name = (l), .help = (h) }
+#define OPT_GROUP(h) { .type = OPTION_GROUP, .help = (h) }
+#define OPT_BIT(s, l, v, h, b) { .type = OPTION_BIT, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (b) }
+#define OPT_BOOLEAN(s, l, v, h) { .type = OPTION_BOOLEAN, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_SET_INT(s, l, v, h, i) { .type = OPTION_SET_INT, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (i) }
+#define OPT_SET_PTR(s, l, v, h, p) { .type = OPTION_SET_PTR, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (p) }
+#define OPT_INTEGER(s, l, v, h) { .type = OPTION_INTEGER, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_LONG(s, l, v, h) { .type = OPTION_LONG, .short_name = (s), .long_name = (l), .value = (v), .help = (h) }
+#define OPT_STRING(s, l, v, a, h) { .type = OPTION_STRING, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h) }
#define OPT_DATE(s, l, v, h) \
- { OPTION_CALLBACK, (s), (l), (v), "time",(h), 0, \
- parse_opt_approxidate_cb }
+ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), .argh = "time", .help = (h), .callback = parse_opt_approxidate_cb }
#define OPT_CALLBACK(s, l, v, a, h, f) \
- { OPTION_CALLBACK, (s), (l), (v), (a), (h), 0, (f) }
+ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f) }
+#define OPT_CALLBACK_DEFAULT(s, l, v, a, h, f, d) \
+ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .defval = (intptr_t)d, .flags = PARSE_OPT_LASTARG_DEFAULT }
/* parse_options() will filter out the processed options and leave the
* non-option argments in argv[].
diff --git a/tools/perf/util/quote.c b/tools/perf/util/quote.c
index f18c521..2726fe4 100644
--- a/tools/perf/util/quote.c
+++ b/tools/perf/util/quote.c
@@ -162,12 +162,16 @@
return sq_lookup[(unsigned char)c] + quote_path_fully > 0;
}
-/* returns the longest prefix not needing a quote up to maxlen if positive.
- This stops at the first \0 because it's marked as a character needing an
- escape */
-static size_t next_quote_pos(const char *s, ssize_t maxlen)
+/*
+ * Returns the longest prefix not needing a quote up to maxlen if
+ * positive.
+ * This stops at the first \0 because it's marked as a character
+ * needing an escape.
+ */
+static ssize_t next_quote_pos(const char *s, ssize_t maxlen)
{
- size_t len;
+ ssize_t len;
+
if (maxlen < 0) {
for (len = 0; !sq_must_quote(s[len]); len++);
} else {
@@ -192,22 +196,22 @@
static size_t quote_c_style_counted(const char *name, ssize_t maxlen,
struct strbuf *sb, FILE *fp, int no_dq)
{
-#undef EMIT
-#define EMIT(c) \
- do { \
- if (sb) strbuf_addch(sb, (c)); \
- if (fp) fputc((c), fp); \
- count++; \
- } while (0)
-#define EMITBUF(s, l) \
- do { \
- int __ret; \
- if (sb) strbuf_add(sb, (s), (l)); \
- if (fp) __ret = fwrite((s), (l), 1, fp); \
- count += (l); \
+#define EMIT(c) \
+ do { \
+ if (sb) strbuf_addch(sb, (c)); \
+ if (fp) fputc((c), fp); \
+ count++; \
} while (0)
- size_t len, count = 0;
+#define EMITBUF(s, l) \
+ do { \
+ int __ret; \
+ if (sb) strbuf_add(sb, (s), (l)); \
+ if (fp) __ret = fwrite((s), (l), 1, fp); \
+ count += (l); \
+ } while (0)
+
+ ssize_t len, count = 0;
const char *p = name;
for (;;) {
@@ -273,8 +277,8 @@
fputc(terminator, fp);
}
-extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
- const char *name, FILE *fp, int terminator)
+void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
+ const char *name, FILE *fp, int terminator)
{
int needquote = 0;
@@ -306,7 +310,7 @@
len = strlen(in);
/* "../" prefix itself does not need quoting, but "in" might. */
- needquote = next_quote_pos(in, len) < len;
+ needquote = (next_quote_pos(in, len) < len);
strbuf_setlen(out, 0);
strbuf_grow(out, len);
@@ -314,7 +318,7 @@
strbuf_addch(out, '"');
if (prefix) {
int off = 0;
- while (prefix[off] && off < len && prefix[off] == in[off])
+ while (off < len && prefix[off] && prefix[off] == in[off])
if (prefix[off] == '/') {
prefix += off + 1;
in += off + 1;
diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h
index 5dfad89..a5454a1 100644
--- a/tools/perf/util/quote.h
+++ b/tools/perf/util/quote.h
@@ -53,7 +53,7 @@
extern void quote_two_c_style(struct strbuf *, const char *, const char *, int);
extern void write_name_quoted(const char *name, FILE *, int terminator);
-extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
+extern void write_name_quotedpfx(const char *pfx, ssize_t pfxlen,
const char *name, FILE *, int terminator);
/* quote path as relative to the given prefix */
diff --git a/tools/perf/util/rbtree.c b/tools/perf/util/rbtree.c
deleted file mode 100644
index b15ba9c..0000000
--- a/tools/perf/util/rbtree.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
- Red Black Trees
- (C) 1999 Andrea Arcangeli <andrea@suse.de>
- (C) 2002 David Woodhouse <dwmw2@infradead.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- linux/lib/rbtree.c
-*/
-
-#include "rbtree.h"
-
-static void __rb_rotate_left(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *right = node->rb_right;
- struct rb_node *parent = rb_parent(node);
-
- if ((node->rb_right = right->rb_left))
- rb_set_parent(right->rb_left, node);
- right->rb_left = node;
-
- rb_set_parent(right, parent);
-
- if (parent)
- {
- if (node == parent->rb_left)
- parent->rb_left = right;
- else
- parent->rb_right = right;
- }
- else
- root->rb_node = right;
- rb_set_parent(node, right);
-}
-
-static void __rb_rotate_right(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *left = node->rb_left;
- struct rb_node *parent = rb_parent(node);
-
- if ((node->rb_left = left->rb_right))
- rb_set_parent(left->rb_right, node);
- left->rb_right = node;
-
- rb_set_parent(left, parent);
-
- if (parent)
- {
- if (node == parent->rb_right)
- parent->rb_right = left;
- else
- parent->rb_left = left;
- }
- else
- root->rb_node = left;
- rb_set_parent(node, left);
-}
-
-void rb_insert_color(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *parent, *gparent;
-
- while ((parent = rb_parent(node)) && rb_is_red(parent))
- {
- gparent = rb_parent(parent);
-
- if (parent == gparent->rb_left)
- {
- {
- register struct rb_node *uncle = gparent->rb_right;
- if (uncle && rb_is_red(uncle))
- {
- rb_set_black(uncle);
- rb_set_black(parent);
- rb_set_red(gparent);
- node = gparent;
- continue;
- }
- }
-
- if (parent->rb_right == node)
- {
- register struct rb_node *tmp;
- __rb_rotate_left(parent, root);
- tmp = parent;
- parent = node;
- node = tmp;
- }
-
- rb_set_black(parent);
- rb_set_red(gparent);
- __rb_rotate_right(gparent, root);
- } else {
- {
- register struct rb_node *uncle = gparent->rb_left;
- if (uncle && rb_is_red(uncle))
- {
- rb_set_black(uncle);
- rb_set_black(parent);
- rb_set_red(gparent);
- node = gparent;
- continue;
- }
- }
-
- if (parent->rb_left == node)
- {
- register struct rb_node *tmp;
- __rb_rotate_right(parent, root);
- tmp = parent;
- parent = node;
- node = tmp;
- }
-
- rb_set_black(parent);
- rb_set_red(gparent);
- __rb_rotate_left(gparent, root);
- }
- }
-
- rb_set_black(root->rb_node);
-}
-
-static void __rb_erase_color(struct rb_node *node, struct rb_node *parent,
- struct rb_root *root)
-{
- struct rb_node *other;
-
- while ((!node || rb_is_black(node)) && node != root->rb_node)
- {
- if (parent->rb_left == node)
- {
- other = parent->rb_right;
- if (rb_is_red(other))
- {
- rb_set_black(other);
- rb_set_red(parent);
- __rb_rotate_left(parent, root);
- other = parent->rb_right;
- }
- if ((!other->rb_left || rb_is_black(other->rb_left)) &&
- (!other->rb_right || rb_is_black(other->rb_right)))
- {
- rb_set_red(other);
- node = parent;
- parent = rb_parent(node);
- }
- else
- {
- if (!other->rb_right || rb_is_black(other->rb_right))
- {
- rb_set_black(other->rb_left);
- rb_set_red(other);
- __rb_rotate_right(other, root);
- other = parent->rb_right;
- }
- rb_set_color(other, rb_color(parent));
- rb_set_black(parent);
- rb_set_black(other->rb_right);
- __rb_rotate_left(parent, root);
- node = root->rb_node;
- break;
- }
- }
- else
- {
- other = parent->rb_left;
- if (rb_is_red(other))
- {
- rb_set_black(other);
- rb_set_red(parent);
- __rb_rotate_right(parent, root);
- other = parent->rb_left;
- }
- if ((!other->rb_left || rb_is_black(other->rb_left)) &&
- (!other->rb_right || rb_is_black(other->rb_right)))
- {
- rb_set_red(other);
- node = parent;
- parent = rb_parent(node);
- }
- else
- {
- if (!other->rb_left || rb_is_black(other->rb_left))
- {
- rb_set_black(other->rb_right);
- rb_set_red(other);
- __rb_rotate_left(other, root);
- other = parent->rb_left;
- }
- rb_set_color(other, rb_color(parent));
- rb_set_black(parent);
- rb_set_black(other->rb_left);
- __rb_rotate_right(parent, root);
- node = root->rb_node;
- break;
- }
- }
- }
- if (node)
- rb_set_black(node);
-}
-
-void rb_erase(struct rb_node *node, struct rb_root *root)
-{
- struct rb_node *child, *parent;
- int color;
-
- if (!node->rb_left)
- child = node->rb_right;
- else if (!node->rb_right)
- child = node->rb_left;
- else
- {
- struct rb_node *old = node, *left;
-
- node = node->rb_right;
- while ((left = node->rb_left) != NULL)
- node = left;
- child = node->rb_right;
- parent = rb_parent(node);
- color = rb_color(node);
-
- if (child)
- rb_set_parent(child, parent);
- if (parent == old) {
- parent->rb_right = child;
- parent = node;
- } else
- parent->rb_left = child;
-
- node->rb_parent_color = old->rb_parent_color;
- node->rb_right = old->rb_right;
- node->rb_left = old->rb_left;
-
- if (rb_parent(old))
- {
- if (rb_parent(old)->rb_left == old)
- rb_parent(old)->rb_left = node;
- else
- rb_parent(old)->rb_right = node;
- } else
- root->rb_node = node;
-
- rb_set_parent(old->rb_left, node);
- if (old->rb_right)
- rb_set_parent(old->rb_right, node);
- goto color;
- }
-
- parent = rb_parent(node);
- color = rb_color(node);
-
- if (child)
- rb_set_parent(child, parent);
- if (parent)
- {
- if (parent->rb_left == node)
- parent->rb_left = child;
- else
- parent->rb_right = child;
- }
- else
- root->rb_node = child;
-
- color:
- if (color == RB_BLACK)
- __rb_erase_color(child, parent, root);
-}
-
-/*
- * This function returns the first node (in sort order) of the tree.
- */
-struct rb_node *rb_first(const struct rb_root *root)
-{
- struct rb_node *n;
-
- n = root->rb_node;
- if (!n)
- return NULL;
- while (n->rb_left)
- n = n->rb_left;
- return n;
-}
-
-struct rb_node *rb_last(const struct rb_root *root)
-{
- struct rb_node *n;
-
- n = root->rb_node;
- if (!n)
- return NULL;
- while (n->rb_right)
- n = n->rb_right;
- return n;
-}
-
-struct rb_node *rb_next(const struct rb_node *node)
-{
- struct rb_node *parent;
-
- if (rb_parent(node) == node)
- return NULL;
-
- /* If we have a right-hand child, go down and then left as far
- as we can. */
- if (node->rb_right) {
- node = node->rb_right;
- while (node->rb_left)
- node=node->rb_left;
- return (struct rb_node *)node;
- }
-
- /* No right-hand children. Everything down and left is
- smaller than us, so any 'next' node must be in the general
- direction of our parent. Go up the tree; any time the
- ancestor is a right-hand child of its parent, keep going
- up. First time it's a left-hand child of its parent, said
- parent is our 'next' node. */
- while ((parent = rb_parent(node)) && node == parent->rb_right)
- node = parent;
-
- return parent;
-}
-
-struct rb_node *rb_prev(const struct rb_node *node)
-{
- struct rb_node *parent;
-
- if (rb_parent(node) == node)
- return NULL;
-
- /* If we have a left-hand child, go down and then right as far
- as we can. */
- if (node->rb_left) {
- node = node->rb_left;
- while (node->rb_right)
- node=node->rb_right;
- return (struct rb_node *)node;
- }
-
- /* No left-hand children. Go up till we find an ancestor which
- is a right-hand child of its parent */
- while ((parent = rb_parent(node)) && node == parent->rb_left)
- node = parent;
-
- return parent;
-}
-
-void rb_replace_node(struct rb_node *victim, struct rb_node *new,
- struct rb_root *root)
-{
- struct rb_node *parent = rb_parent(victim);
-
- /* Set the surrounding nodes to point to the replacement */
- if (parent) {
- if (victim == parent->rb_left)
- parent->rb_left = new;
- else
- parent->rb_right = new;
- } else {
- root->rb_node = new;
- }
- if (victim->rb_left)
- rb_set_parent(victim->rb_left, new);
- if (victim->rb_right)
- rb_set_parent(victim->rb_right, new);
-
- /* Copy the pointers/colour from the victim to the replacement */
- *new = *victim;
-}
diff --git a/tools/perf/util/rbtree.h b/tools/perf/util/rbtree.h
deleted file mode 100644
index 6bdc488..0000000
--- a/tools/perf/util/rbtree.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- Red Black Trees
- (C) 1999 Andrea Arcangeli <andrea@suse.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- linux/include/linux/rbtree.h
-
- To use rbtrees you'll have to implement your own insert and search cores.
- This will avoid us to use callbacks and to drop drammatically performances.
- I know it's not the cleaner way, but in C (not in C++) to get
- performances and genericity...
-
- Some example of insert and search follows here. The search is a plain
- normal search over an ordered tree. The insert instead must be implemented
- int two steps: as first thing the code must insert the element in
- order as a red leaf in the tree, then the support library function
- rb_insert_color() must be called. Such function will do the
- not trivial work to rebalance the rbtree if necessary.
-
------------------------------------------------------------------------
-static inline struct page * rb_search_page_cache(struct inode * inode,
- unsigned long offset)
-{
- struct rb_node * n = inode->i_rb_page_cache.rb_node;
- struct page * page;
-
- while (n)
- {
- page = rb_entry(n, struct page, rb_page_cache);
-
- if (offset < page->offset)
- n = n->rb_left;
- else if (offset > page->offset)
- n = n->rb_right;
- else
- return page;
- }
- return NULL;
-}
-
-static inline struct page * __rb_insert_page_cache(struct inode * inode,
- unsigned long offset,
- struct rb_node * node)
-{
- struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
- struct rb_node * parent = NULL;
- struct page * page;
-
- while (*p)
- {
- parent = *p;
- page = rb_entry(parent, struct page, rb_page_cache);
-
- if (offset < page->offset)
- p = &(*p)->rb_left;
- else if (offset > page->offset)
- p = &(*p)->rb_right;
- else
- return page;
- }
-
- rb_link_node(node, parent, p);
-
- return NULL;
-}
-
-static inline struct page * rb_insert_page_cache(struct inode * inode,
- unsigned long offset,
- struct rb_node * node)
-{
- struct page * ret;
- if ((ret = __rb_insert_page_cache(inode, offset, node)))
- goto out;
- rb_insert_color(node, &inode->i_rb_page_cache);
- out:
- return ret;
-}
------------------------------------------------------------------------
-*/
-
-#ifndef _LINUX_RBTREE_H
-#define _LINUX_RBTREE_H
-
-#include <stddef.h>
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
-struct rb_node
-{
- unsigned long rb_parent_color;
-#define RB_RED 0
-#define RB_BLACK 1
- struct rb_node *rb_right;
- struct rb_node *rb_left;
-} __attribute__((aligned(sizeof(long))));
- /* The alignment might seem pointless, but allegedly CRIS needs it */
-
-struct rb_root
-{
- struct rb_node *rb_node;
-};
-
-
-#define rb_parent(r) ((struct rb_node *)((r)->rb_parent_color & ~3))
-#define rb_color(r) ((r)->rb_parent_color & 1)
-#define rb_is_red(r) (!rb_color(r))
-#define rb_is_black(r) rb_color(r)
-#define rb_set_red(r) do { (r)->rb_parent_color &= ~1; } while (0)
-#define rb_set_black(r) do { (r)->rb_parent_color |= 1; } while (0)
-
-static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
-{
- rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
-}
-static inline void rb_set_color(struct rb_node *rb, int color)
-{
- rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
-}
-
-#define RB_ROOT (struct rb_root) { NULL, }
-#define rb_entry(ptr, type, member) container_of(ptr, type, member)
-
-#define RB_EMPTY_ROOT(root) ((root)->rb_node == NULL)
-#define RB_EMPTY_NODE(node) (rb_parent(node) == node)
-#define RB_CLEAR_NODE(node) (rb_set_parent(node, node))
-
-extern void rb_insert_color(struct rb_node *, struct rb_root *);
-extern void rb_erase(struct rb_node *, struct rb_root *);
-
-/* Find logical next and previous nodes in a tree */
-extern struct rb_node *rb_next(const struct rb_node *);
-extern struct rb_node *rb_prev(const struct rb_node *);
-extern struct rb_node *rb_first(const struct rb_root *);
-extern struct rb_node *rb_last(const struct rb_root *);
-
-/* Fast replacement of a single node without remove/rebalance/add/rebalance */
-extern void rb_replace_node(struct rb_node *victim, struct rb_node *new,
- struct rb_root *root);
-
-static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
- struct rb_node ** rb_link)
-{
- node->rb_parent_color = (unsigned long )parent;
- node->rb_left = node->rb_right = NULL;
-
- *rb_link = node;
-}
-
-#endif /* _LINUX_RBTREE_H */
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
index b2f5e85..a393534 100644
--- a/tools/perf/util/run-command.c
+++ b/tools/perf/util/run-command.c
@@ -65,7 +65,6 @@
cmd->err = fderr[0];
}
-#ifndef __MINGW32__
fflush(NULL);
cmd->pid = fork();
if (!cmd->pid) {
@@ -118,71 +117,6 @@
}
exit(127);
}
-#else
- int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */
- const char **sargv = cmd->argv;
- char **env = environ;
-
- if (cmd->no_stdin) {
- s0 = dup(0);
- dup_devnull(0);
- } else if (need_in) {
- s0 = dup(0);
- dup2(fdin[0], 0);
- } else if (cmd->in) {
- s0 = dup(0);
- dup2(cmd->in, 0);
- }
-
- if (cmd->no_stderr) {
- s2 = dup(2);
- dup_devnull(2);
- } else if (need_err) {
- s2 = dup(2);
- dup2(fderr[1], 2);
- }
-
- if (cmd->no_stdout) {
- s1 = dup(1);
- dup_devnull(1);
- } else if (cmd->stdout_to_stderr) {
- s1 = dup(1);
- dup2(2, 1);
- } else if (need_out) {
- s1 = dup(1);
- dup2(fdout[1], 1);
- } else if (cmd->out > 1) {
- s1 = dup(1);
- dup2(cmd->out, 1);
- }
-
- if (cmd->dir)
- die("chdir in start_command() not implemented");
- if (cmd->env) {
- env = copy_environ();
- for (; *cmd->env; cmd->env++)
- env = env_setenv(env, *cmd->env);
- }
-
- if (cmd->perf_cmd) {
- cmd->argv = prepare_perf_cmd(cmd->argv);
- }
-
- cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env);
-
- if (cmd->env)
- free_environ(env);
- if (cmd->perf_cmd)
- free(cmd->argv);
-
- cmd->argv = sargv;
- if (s0 >= 0)
- dup2(s0, 0), close(s0);
- if (s1 >= 0)
- dup2(s1, 1), close(s1);
- if (s2 >= 0)
- dup2(s2, 2), close(s2);
-#endif
if (cmd->pid < 0) {
int err = errno;
@@ -288,14 +222,6 @@
return run_command(&cmd);
}
-#ifdef __MINGW32__
-static __stdcall unsigned run_thread(void *data)
-{
- struct async *async = data;
- return async->proc(async->fd_for_proc, async->data);
-}
-#endif
-
int start_async(struct async *async)
{
int pipe_out[2];
@@ -304,7 +230,6 @@
return error("cannot create pipe: %s", strerror(errno));
async->out = pipe_out[0];
-#ifndef __MINGW32__
/* Flush stdio before fork() to avoid cloning buffers */
fflush(NULL);
@@ -319,33 +244,17 @@
exit(!!async->proc(pipe_out[1], async->data));
}
close(pipe_out[1]);
-#else
- async->fd_for_proc = pipe_out[1];
- async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
- if (!async->tid) {
- error("cannot create thread: %s", strerror(errno));
- close_pair(pipe_out);
- return -1;
- }
-#endif
+
return 0;
}
int finish_async(struct async *async)
{
-#ifndef __MINGW32__
int ret = 0;
if (wait_or_whine(async->pid))
ret = error("waitpid (async) failed");
-#else
- DWORD ret = 0;
- if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
- ret = error("waiting for thread failed: %lu", GetLastError());
- else if (!GetExitCodeThread(async->tid, &ret))
- ret = error("cannot get thread exit code: %lu", GetLastError());
- CloseHandle(async->tid);
-#endif
+
return ret;
}
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
index 328289f..cc1837d 100644
--- a/tools/perf/util/run-command.h
+++ b/tools/perf/util/run-command.h
@@ -79,12 +79,7 @@
int (*proc)(int fd, void *data);
void *data;
int out; /* caller reads from here and closes it */
-#ifndef __MINGW32__
pid_t pid;
-#else
- HANDLE tid;
- int fd_for_proc;
-#endif
};
int start_async(struct async *async);
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index eaba093..5249d5a 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -16,7 +16,7 @@
*/
char strbuf_slopbuf[1];
-void strbuf_init(struct strbuf *sb, size_t hint)
+void strbuf_init(struct strbuf *sb, ssize_t hint)
{
sb->alloc = sb->len = 0;
sb->buf = strbuf_slopbuf;
@@ -92,7 +92,8 @@
void strbuf_tolower(struct strbuf *sb)
{
- int i;
+ unsigned int i;
+
for (i = 0; i < sb->len; i++)
sb->buf[i] = tolower(sb->buf[i]);
}
@@ -259,12 +260,12 @@
res = fread(sb->buf + sb->len, 1, size, f);
if (res > 0)
strbuf_setlen(sb, sb->len + res);
- else if (res < 0 && oldalloc == 0)
+ else if (oldalloc == 0)
strbuf_release(sb);
return res;
}
-ssize_t strbuf_read(struct strbuf *sb, int fd, size_t hint)
+ssize_t strbuf_read(struct strbuf *sb, int fd, ssize_t hint)
{
size_t oldlen = sb->len;
size_t oldalloc = sb->alloc;
@@ -293,7 +294,7 @@
#define STRBUF_MAXLINK (2*PATH_MAX)
-int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint)
+int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint)
{
size_t oldalloc = sb->alloc;
@@ -301,7 +302,7 @@
hint = 32;
while (hint < STRBUF_MAXLINK) {
- int len;
+ ssize_t len;
strbuf_grow(sb, hint);
len = readlink(path, sb->buf, hint);
@@ -343,7 +344,7 @@
return 0;
}
-int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint)
+int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint)
{
int fd, len;
diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h
index 9ee908a..d2aa86c 100644
--- a/tools/perf/util/strbuf.h
+++ b/tools/perf/util/strbuf.h
@@ -50,7 +50,7 @@
#define STRBUF_INIT { 0, 0, strbuf_slopbuf }
/*----- strbuf life cycle -----*/
-extern void strbuf_init(struct strbuf *, size_t);
+extern void strbuf_init(struct strbuf *buf, ssize_t hint);
extern void strbuf_release(struct strbuf *);
extern char *strbuf_detach(struct strbuf *, size_t *);
extern void strbuf_attach(struct strbuf *, void *, size_t, size_t);
@@ -61,7 +61,7 @@
}
/*----- strbuf size related -----*/
-static inline size_t strbuf_avail(const struct strbuf *sb) {
+static inline ssize_t strbuf_avail(const struct strbuf *sb) {
return sb->alloc ? sb->alloc - sb->len - 1 : 0;
}
@@ -122,9 +122,9 @@
extern size_t strbuf_fread(struct strbuf *, size_t, FILE *);
/* XXX: if read fails, any partial read is undone */
-extern ssize_t strbuf_read(struct strbuf *, int fd, size_t hint);
-extern int strbuf_read_file(struct strbuf *sb, const char *path, size_t hint);
-extern int strbuf_readlink(struct strbuf *sb, const char *path, size_t hint);
+extern ssize_t strbuf_read(struct strbuf *, int fd, ssize_t hint);
+extern int strbuf_read_file(struct strbuf *sb, const char *path, ssize_t hint);
+extern int strbuf_readlink(struct strbuf *sb, const char *path, ssize_t hint);
extern int strbuf_getline(struct strbuf *, FILE *, int);
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index 37b0325..bf39dfa 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -1,8 +1,11 @@
#ifndef _PERF_STRING_H_
#define _PERF_STRING_H_
-#include "../types.h"
+#include "types.h"
int hex2u64(const char *ptr, u64 *val);
+#define _STR(x) #x
+#define STR(x) _STR(x)
+
#endif
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
new file mode 100644
index 0000000..7ad3817
--- /dev/null
+++ b/tools/perf/util/strlist.c
@@ -0,0 +1,200 @@
+/*
+ * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include "strlist.h"
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static struct str_node *str_node__new(const char *s, bool dupstr)
+{
+ struct str_node *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ if (dupstr) {
+ s = strdup(s);
+ if (s == NULL)
+ goto out_delete;
+ }
+ self->s = s;
+ }
+
+ return self;
+
+out_delete:
+ free(self);
+ return NULL;
+}
+
+static void str_node__delete(struct str_node *self, bool dupstr)
+{
+ if (dupstr)
+ free((void *)self->s);
+ free(self);
+}
+
+int strlist__add(struct strlist *self, const char *new_entry)
+{
+ struct rb_node **p = &self->entries.rb_node;
+ struct rb_node *parent = NULL;
+ struct str_node *sn;
+
+ while (*p != NULL) {
+ int rc;
+
+ parent = *p;
+ sn = rb_entry(parent, struct str_node, rb_node);
+ rc = strcmp(sn->s, new_entry);
+
+ if (rc > 0)
+ p = &(*p)->rb_left;
+ else if (rc < 0)
+ p = &(*p)->rb_right;
+ else
+ return -EEXIST;
+ }
+
+ sn = str_node__new(new_entry, self->dupstr);
+ if (sn == NULL)
+ return -ENOMEM;
+
+ rb_link_node(&sn->rb_node, parent, p);
+ rb_insert_color(&sn->rb_node, &self->entries);
+ ++self->nr_entries;
+
+ return 0;
+}
+
+int strlist__load(struct strlist *self, const char *filename)
+{
+ char entry[1024];
+ int err;
+ FILE *fp = fopen(filename, "r");
+
+ if (fp == NULL)
+ return errno;
+
+ while (fgets(entry, sizeof(entry), fp) != NULL) {
+ const size_t len = strlen(entry);
+
+ if (len == 0)
+ continue;
+ entry[len - 1] = '\0';
+
+ err = strlist__add(self, entry);
+ if (err != 0)
+ goto out;
+ }
+
+ err = 0;
+out:
+ fclose(fp);
+ return err;
+}
+
+void strlist__remove(struct strlist *self, struct str_node *sn)
+{
+ rb_erase(&sn->rb_node, &self->entries);
+ str_node__delete(sn, self->dupstr);
+}
+
+bool strlist__has_entry(struct strlist *self, const char *entry)
+{
+ struct rb_node **p = &self->entries.rb_node;
+ struct rb_node *parent = NULL;
+
+ while (*p != NULL) {
+ struct str_node *sn;
+ int rc;
+
+ parent = *p;
+ sn = rb_entry(parent, struct str_node, rb_node);
+ rc = strcmp(sn->s, entry);
+
+ if (rc > 0)
+ p = &(*p)->rb_left;
+ else if (rc < 0)
+ p = &(*p)->rb_right;
+ else
+ return true;
+ }
+
+ return false;
+}
+
+static int strlist__parse_list_entry(struct strlist *self, const char *s)
+{
+ if (strncmp(s, "file://", 7) == 0)
+ return strlist__load(self, s + 7);
+
+ return strlist__add(self, s);
+}
+
+int strlist__parse_list(struct strlist *self, const char *s)
+{
+ char *sep;
+ int err;
+
+ while ((sep = strchr(s, ',')) != NULL) {
+ *sep = '\0';
+ err = strlist__parse_list_entry(self, s);
+ *sep = ',';
+ if (err != 0)
+ return err;
+ s = sep + 1;
+ }
+
+ return *s ? strlist__parse_list_entry(self, s) : 0;
+}
+
+struct strlist *strlist__new(bool dupstr, const char *slist)
+{
+ struct strlist *self = malloc(sizeof(*self));
+
+ if (self != NULL) {
+ self->entries = RB_ROOT;
+ self->dupstr = dupstr;
+ self->nr_entries = 0;
+ if (slist && strlist__parse_list(self, slist) != 0)
+ goto out_error;
+ }
+
+ return self;
+out_error:
+ free(self);
+ return NULL;
+}
+
+void strlist__delete(struct strlist *self)
+{
+ if (self != NULL) {
+ struct str_node *pos;
+ struct rb_node *next = rb_first(&self->entries);
+
+ while (next) {
+ pos = rb_entry(next, struct str_node, rb_node);
+ next = rb_next(&pos->rb_node);
+ strlist__remove(self, pos);
+ }
+ self->entries = RB_ROOT;
+ free(self);
+ }
+}
+
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx)
+{
+ struct rb_node *nd;
+
+ for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
+ struct str_node *pos = rb_entry(nd, struct str_node, rb_node);
+
+ if (!idx--)
+ return pos;
+ }
+
+ return NULL;
+}
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
new file mode 100644
index 0000000..921818e
--- /dev/null
+++ b/tools/perf/util/strlist.h
@@ -0,0 +1,39 @@
+#ifndef STRLIST_H_
+#define STRLIST_H_
+
+#include <linux/rbtree.h>
+#include <stdbool.h>
+
+struct str_node {
+ struct rb_node rb_node;
+ const char *s;
+};
+
+struct strlist {
+ struct rb_root entries;
+ unsigned int nr_entries;
+ bool dupstr;
+};
+
+struct strlist *strlist__new(bool dupstr, const char *slist);
+void strlist__delete(struct strlist *self);
+
+void strlist__remove(struct strlist *self, struct str_node *sn);
+int strlist__load(struct strlist *self, const char *filename);
+int strlist__add(struct strlist *self, const char *str);
+
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx);
+bool strlist__has_entry(struct strlist *self, const char *entry);
+
+static inline bool strlist__empty(const struct strlist *self)
+{
+ return self->nr_entries == 0;
+}
+
+static inline unsigned int strlist__nr_entries(const struct strlist *self)
+{
+ return self->nr_entries;
+}
+
+int strlist__parse_list(struct strlist *self, const char *s);
+#endif /* STRLIST_H_ */
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 86e1437..5c0f42e 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -9,6 +9,16 @@
const char *sym_hist_filter;
+enum dso_origin {
+ DSO__ORIG_KERNEL = 0,
+ DSO__ORIG_JAVA_JIT,
+ DSO__ORIG_FEDORA,
+ DSO__ORIG_UBUNTU,
+ DSO__ORIG_BUILDID,
+ DSO__ORIG_DSO,
+ DSO__ORIG_NOT_FOUND,
+};
+
static struct symbol *symbol__new(u64 start, u64 len,
const char *name, unsigned int priv_size,
u64 obj_start, int verbose)
@@ -35,7 +45,7 @@
self = ((void *)self) + priv_size;
}
self->start = start;
- self->end = start + len - 1;
+ self->end = len ? start + len - 1 : start;
memcpy(self->name, name, namelen);
return self;
@@ -48,8 +58,12 @@
static size_t symbol__fprintf(struct symbol *self, FILE *fp)
{
- return fprintf(fp, " %llx-%llx %s\n",
+ if (!self->module)
+ return fprintf(fp, " %llx-%llx %s\n",
self->start, self->end, self->name);
+ else
+ return fprintf(fp, " %llx-%llx %s \t[%s]\n",
+ self->start, self->end, self->name, self->module->name);
}
struct dso *dso__new(const char *name, unsigned int sym_priv_size)
@@ -61,6 +75,8 @@
self->syms = RB_ROOT;
self->sym_priv_size = sym_priv_size;
self->find_symbol = dso__find_symbol;
+ self->slen_calculated = 0;
+ self->origin = DSO__ORIG_NOT_FOUND;
}
return self;
@@ -146,6 +162,7 @@
char *line = NULL;
size_t n;
FILE *file = fopen("/proc/kallsyms", "r");
+ int count = 0;
if (file == NULL)
goto out_failure;
@@ -188,8 +205,10 @@
if (filter && filter(self, sym))
symbol__delete(sym, self->sym_priv_size);
- else
+ else {
dso__insert_symbol(self, sym);
+ count++;
+ }
}
/*
@@ -212,7 +231,7 @@
free(line);
fclose(file);
- return 0;
+ return count;
out_delete_line:
free(line);
@@ -307,6 +326,26 @@
sym->st_size != 0;
}
+static inline int elf_sym__is_label(const GElf_Sym *sym)
+{
+ return elf_sym__type(sym) == STT_NOTYPE &&
+ sym->st_name != 0 &&
+ sym->st_shndx != SHN_UNDEF &&
+ sym->st_shndx != SHN_ABS;
+}
+
+static inline const char *elf_sec__name(const GElf_Shdr *shdr,
+ const Elf_Data *secstrs)
+{
+ return secstrs->d_buf + shdr->sh_name;
+}
+
+static inline int elf_sec__is_text(const GElf_Shdr *shdr,
+ const Elf_Data *secstrs)
+{
+ return strstr(elf_sec__name(shdr, secstrs), "text") != NULL;
+}
+
static inline const char *elf_sym__name(const GElf_Sym *sym,
const Elf_Data *symstrs)
{
@@ -346,36 +385,61 @@
idx < nr_entries; \
++idx, pos = gelf_getrela(reldata, idx, &pos_mem))
-static int dso__synthesize_plt_symbols(struct dso *self, Elf *elf,
- GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym,
- GElf_Shdr *shdr_dynsym,
- size_t dynsym_idx, int verbose)
+/*
+ * We need to check if we have a .dynsym, so that we can handle the
+ * .plt, synthesizing its symbols, that aren't on the symtabs (be it
+ * .dynsym or .symtab).
+ * And always look at the original dso, not at debuginfo packages, that
+ * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
+ */
+static int dso__synthesize_plt_symbols(struct dso *self, int verbose)
{
uint32_t nr_rel_entries, idx;
GElf_Sym sym;
u64 plt_offset;
GElf_Shdr shdr_plt;
struct symbol *f;
- GElf_Shdr shdr_rel_plt;
+ GElf_Shdr shdr_rel_plt, shdr_dynsym;
Elf_Data *reldata, *syms, *symstrs;
- Elf_Scn *scn_plt_rel, *scn_symstrs;
+ Elf_Scn *scn_plt_rel, *scn_symstrs, *scn_dynsym;
+ size_t dynsym_idx;
+ GElf_Ehdr ehdr;
char sympltname[1024];
- int nr = 0, symidx;
+ Elf *elf;
+ int nr = 0, symidx, fd, err = 0;
- scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+ fd = open(self->name, O_RDONLY);
+ if (fd < 0)
+ goto out;
+
+ elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ if (elf == NULL)
+ goto out_close;
+
+ if (gelf_getehdr(elf, &ehdr) == NULL)
+ goto out_elf_end;
+
+ scn_dynsym = elf_section_by_name(elf, &ehdr, &shdr_dynsym,
+ ".dynsym", &dynsym_idx);
+ if (scn_dynsym == NULL)
+ goto out_elf_end;
+
+ scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
".rela.plt", NULL);
if (scn_plt_rel == NULL) {
- scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+ scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
".rel.plt", NULL);
if (scn_plt_rel == NULL)
- return 0;
+ goto out_elf_end;
}
- if (shdr_rel_plt.sh_link != dynsym_idx)
- return 0;
+ err = -1;
- if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL)
- return 0;
+ if (shdr_rel_plt.sh_link != dynsym_idx)
+ goto out_elf_end;
+
+ if (elf_section_by_name(elf, &ehdr, &shdr_plt, ".plt", NULL) == NULL)
+ goto out_elf_end;
/*
* Fetch the relocation section to find the indexes to the GOT
@@ -383,19 +447,19 @@
*/
reldata = elf_getdata(scn_plt_rel, NULL);
if (reldata == NULL)
- return -1;
+ goto out_elf_end;
syms = elf_getdata(scn_dynsym, NULL);
if (syms == NULL)
- return -1;
+ goto out_elf_end;
- scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link);
+ scn_symstrs = elf_getscn(elf, shdr_dynsym.sh_link);
if (scn_symstrs == NULL)
- return -1;
+ goto out_elf_end;
symstrs = elf_getdata(scn_symstrs, NULL);
if (symstrs == NULL)
- return -1;
+ goto out_elf_end;
nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize;
plt_offset = shdr_plt.sh_offset;
@@ -414,7 +478,7 @@
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
sympltname, self->sym_priv_size, 0, verbose);
if (!f)
- return -1;
+ goto out_elf_end;
dso__insert_symbol(self, f);
++nr;
@@ -432,25 +496,31 @@
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
sympltname, self->sym_priv_size, 0, verbose);
if (!f)
- return -1;
+ goto out_elf_end;
dso__insert_symbol(self, f);
++nr;
}
- } else {
- /*
- * TODO: There are still one more shdr_rel_plt.sh_type
- * I have to investigate, but probably should be ignored.
- */
}
- return nr;
+ err = 0;
+out_elf_end:
+ elf_end(elf);
+out_close:
+ close(fd);
+
+ if (err == 0)
+ return nr;
+out:
+ fprintf(stderr, "%s: problems reading %s PLT info.\n",
+ __func__, self->name);
+ return 0;
}
static int dso__load_sym(struct dso *self, int fd, const char *name,
- symbol_filter_t filter, int verbose)
+ symbol_filter_t filter, int verbose, struct module *mod)
{
- Elf_Data *symstrs;
+ Elf_Data *symstrs, *secstrs;
uint32_t nr_syms;
int err = -1;
uint32_t index;
@@ -458,10 +528,9 @@
GElf_Shdr shdr;
Elf_Data *syms;
GElf_Sym sym;
- Elf_Scn *sec, *sec_dynsym;
+ Elf_Scn *sec, *sec_strndx;
Elf *elf;
- size_t dynsym_idx;
- int nr = 0;
+ int nr = 0, kernel = !strcmp("[kernel]", self->name);
elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
@@ -477,32 +546,11 @@
goto out_elf_end;
}
- /*
- * We need to check if we have a .dynsym, so that we can handle the
- * .plt, synthesizing its symbols, that aren't on the symtabs (be it
- * .dynsym or .symtab)
- */
- sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr,
- ".dynsym", &dynsym_idx);
- if (sec_dynsym != NULL) {
- nr = dso__synthesize_plt_symbols(self, elf, &ehdr,
- sec_dynsym, &shdr,
- dynsym_idx, verbose);
- if (nr < 0)
- goto out_elf_end;
- }
-
- /*
- * But if we have a full .symtab (that is a superset of .dynsym) we
- * should add the symbols not in the .dynsyn
- */
sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
if (sec == NULL) {
- if (sec_dynsym == NULL)
+ sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL);
+ if (sec == NULL)
goto out_elf_end;
-
- sec = sec_dynsym;
- gelf_getshdr(sec, &shdr);
}
syms = elf_getdata(sec, NULL);
@@ -517,15 +565,34 @@
if (symstrs == NULL)
goto out_elf_end;
+ sec_strndx = elf_getscn(elf, ehdr.e_shstrndx);
+ if (sec_strndx == NULL)
+ goto out_elf_end;
+
+ secstrs = elf_getdata(sec_strndx, NULL);
+ if (secstrs == NULL)
+ goto out_elf_end;
+
nr_syms = shdr.sh_size / shdr.sh_entsize;
memset(&sym, 0, sizeof(sym));
+ if (!kernel) {
+ self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+ elf_section_by_name(elf, &ehdr, &shdr,
+ ".gnu.prelink_undo",
+ NULL) != NULL);
+ } else self->adjust_symbols = 0;
elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
struct symbol *f;
+ const char *name;
+ char *demangled;
u64 obj_start;
+ struct section *section = NULL;
+ int is_label = elf_sym__is_label(&sym);
+ const char *section_name;
- if (!elf_sym__is_function(&sym))
+ if (!is_label && !elf_sym__is_function(&sym))
continue;
sec = elf_getscn(elf, sym.st_shndx);
@@ -533,19 +600,51 @@
goto out_elf_end;
gelf_getshdr(sec, &shdr);
+
+ if (is_label && !elf_sec__is_text(&shdr, secstrs))
+ continue;
+
+ section_name = elf_sec__name(&shdr, secstrs);
obj_start = sym.st_value;
- sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+ if (self->adjust_symbols) {
+ if (verbose >= 2)
+ printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n",
+ (u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset);
- f = symbol__new(sym.st_value, sym.st_size,
- elf_sym__name(&sym, symstrs),
+ sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+ }
+
+ if (mod) {
+ section = mod->sections->find_section(mod->sections, section_name);
+ if (section)
+ sym.st_value += section->vma;
+ else {
+ fprintf(stderr, "dso__load_sym() module %s lookup of %s failed\n",
+ mod->name, section_name);
+ goto out_elf_end;
+ }
+ }
+ /*
+ * We need to figure out if the object was created from C++ sources
+ * DWARF DW_compile_unit has this, but we don't always have access
+ * to it...
+ */
+ name = elf_sym__name(&sym, symstrs);
+ demangled = bfd_demangle(NULL, name, DMGL_PARAMS | DMGL_ANSI);
+ if (demangled != NULL)
+ name = demangled;
+
+ f = symbol__new(sym.st_value, sym.st_size, name,
self->sym_priv_size, obj_start, verbose);
+ free(demangled);
if (!f)
goto out_elf_end;
if (filter && filter(self, f))
symbol__delete(f, self->sym_priv_size);
else {
+ f->module = mod;
dso__insert_symbol(self, f);
nr++;
}
@@ -558,42 +657,135 @@
return err;
}
+#define BUILD_ID_SIZE 128
+
+static char *dso__read_build_id(struct dso *self, int verbose)
+{
+ int i;
+ GElf_Ehdr ehdr;
+ GElf_Shdr shdr;
+ Elf_Data *build_id_data;
+ Elf_Scn *sec;
+ char *build_id = NULL, *bid;
+ unsigned char *raw;
+ Elf *elf;
+ int fd = open(self->name, O_RDONLY);
+
+ if (fd < 0)
+ goto out;
+
+ elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ if (elf == NULL) {
+ if (verbose)
+ fprintf(stderr, "%s: cannot read %s ELF file.\n",
+ __func__, self->name);
+ goto out_close;
+ }
+
+ if (gelf_getehdr(elf, &ehdr) == NULL) {
+ if (verbose)
+ fprintf(stderr, "%s: cannot get elf header.\n", __func__);
+ goto out_elf_end;
+ }
+
+ sec = elf_section_by_name(elf, &ehdr, &shdr, ".note.gnu.build-id", NULL);
+ if (sec == NULL)
+ goto out_elf_end;
+
+ build_id_data = elf_getdata(sec, NULL);
+ if (build_id_data == NULL)
+ goto out_elf_end;
+ build_id = malloc(BUILD_ID_SIZE);
+ if (build_id == NULL)
+ goto out_elf_end;
+ raw = build_id_data->d_buf + 16;
+ bid = build_id;
+
+ for (i = 0; i < 20; ++i) {
+ sprintf(bid, "%02x", *raw);
+ ++raw;
+ bid += 2;
+ }
+ if (verbose >= 2)
+ printf("%s(%s): %s\n", __func__, self->name, build_id);
+out_elf_end:
+ elf_end(elf);
+out_close:
+ close(fd);
+out:
+ return build_id;
+}
+
+char dso__symtab_origin(const struct dso *self)
+{
+ static const char origin[] = {
+ [DSO__ORIG_KERNEL] = 'k',
+ [DSO__ORIG_JAVA_JIT] = 'j',
+ [DSO__ORIG_FEDORA] = 'f',
+ [DSO__ORIG_UBUNTU] = 'u',
+ [DSO__ORIG_BUILDID] = 'b',
+ [DSO__ORIG_DSO] = 'd',
+ };
+
+ if (self == NULL || self->origin == DSO__ORIG_NOT_FOUND)
+ return '!';
+ return origin[self->origin];
+}
+
int dso__load(struct dso *self, symbol_filter_t filter, int verbose)
{
- int size = strlen(self->name) + sizeof("/usr/lib/debug%s.debug");
- char *name = malloc(size);
- int variant = 0;
+ int size = PATH_MAX;
+ char *name = malloc(size), *build_id = NULL;
int ret = -1;
int fd;
if (!name)
return -1;
- if (strncmp(self->name, "/tmp/perf-", 10) == 0)
- return dso__load_perf_map(self, filter, verbose);
+ self->adjust_symbols = 0;
+
+ if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
+ ret = dso__load_perf_map(self, filter, verbose);
+ self->origin = ret > 0 ? DSO__ORIG_JAVA_JIT :
+ DSO__ORIG_NOT_FOUND;
+ return ret;
+ }
+
+ self->origin = DSO__ORIG_FEDORA - 1;
more:
do {
- switch (variant) {
- case 0: /* Fedora */
+ self->origin++;
+ switch (self->origin) {
+ case DSO__ORIG_FEDORA:
snprintf(name, size, "/usr/lib/debug%s.debug", self->name);
break;
- case 1: /* Ubuntu */
+ case DSO__ORIG_UBUNTU:
snprintf(name, size, "/usr/lib/debug%s", self->name);
break;
- case 2: /* Sane people */
+ case DSO__ORIG_BUILDID:
+ build_id = dso__read_build_id(self, verbose);
+ if (build_id != NULL) {
+ snprintf(name, size,
+ "/usr/lib/debug/.build-id/%.2s/%s.debug",
+ build_id, build_id + 2);
+ free(build_id);
+ break;
+ }
+ self->origin++;
+ /* Fall thru */
+ case DSO__ORIG_DSO:
snprintf(name, size, "%s", self->name);
break;
default:
goto out;
}
- variant++;
fd = open(name, O_RDONLY);
} while (fd < 0);
- ret = dso__load_sym(self, fd, name, filter, verbose);
+ ret = dso__load_sym(self, fd, name, filter, verbose, NULL);
close(fd);
/*
@@ -602,11 +794,98 @@
if (!ret)
goto more;
+ if (ret > 0) {
+ int nr_plt = dso__synthesize_plt_symbols(self, verbose);
+ if (nr_plt > 0)
+ ret += nr_plt;
+ }
out:
free(name);
+ if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
+ return 0;
return ret;
}
+static int dso__load_module(struct dso *self, struct mod_dso *mods, const char *name,
+ symbol_filter_t filter, int verbose)
+{
+ struct module *mod = mod_dso__find_module(mods, name);
+ int err = 0, fd;
+
+ if (mod == NULL || !mod->active)
+ return err;
+
+ fd = open(mod->path, O_RDONLY);
+
+ if (fd < 0)
+ return err;
+
+ err = dso__load_sym(self, fd, name, filter, verbose, mod);
+ close(fd);
+
+ return err;
+}
+
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose)
+{
+ struct mod_dso *mods = mod_dso__new_dso("modules");
+ struct module *pos;
+ struct rb_node *next;
+ int err;
+
+ err = mod_dso__load_modules(mods);
+
+ if (err <= 0)
+ return err;
+
+ /*
+ * Iterate over modules, and load active symbols.
+ */
+ next = rb_first(&mods->mods);
+ while (next) {
+ pos = rb_entry(next, struct module, rb_node);
+ err = dso__load_module(self, mods, pos->name, filter, verbose);
+
+ if (err < 0)
+ break;
+
+ next = rb_next(&pos->rb_node);
+ }
+
+ if (err < 0) {
+ mod_dso__delete_modules(mods);
+ mod_dso__delete_self(mods);
+ }
+
+ return err;
+}
+
+static inline void dso__fill_symbol_holes(struct dso *self)
+{
+ struct symbol *prev = NULL;
+ struct rb_node *nd;
+
+ for (nd = rb_last(&self->syms); nd; nd = rb_prev(nd)) {
+ struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
+
+ if (prev) {
+ u64 hole = 0;
+ int alias = pos->start == prev->start;
+
+ if (!alias)
+ hole = prev->start - pos->end - 1;
+
+ if (hole || alias) {
+ if (alias)
+ pos->end = prev->end;
+ else if (hole)
+ pos->end = prev->start - 1;
+ }
+ }
+ prev = pos;
+ }
+}
+
static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
symbol_filter_t filter, int verbose)
{
@@ -615,23 +894,33 @@
if (fd < 0)
return -1;
- err = dso__load_sym(self, fd, vmlinux, filter, verbose);
+ err = dso__load_sym(self, fd, vmlinux, filter, verbose, NULL);
+
+ if (err > 0)
+ dso__fill_symbol_holes(self);
+
close(fd);
return err;
}
int dso__load_kernel(struct dso *self, const char *vmlinux,
- symbol_filter_t filter, int verbose)
+ symbol_filter_t filter, int verbose, int modules)
{
int err = -1;
- if (vmlinux)
+ if (vmlinux) {
err = dso__load_vmlinux(self, vmlinux, filter, verbose);
+ if (err > 0 && modules)
+ err = dso__load_modules(self, filter, verbose);
+ }
- if (err)
+ if (err <= 0)
err = dso__load_kallsyms(self, filter, verbose);
+ if (err > 0)
+ self->origin = DSO__ORIG_KERNEL;
+
return err;
}
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index ea332e5..b53bf01 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -2,9 +2,34 @@
#define _PERF_SYMBOL_ 1
#include <linux/types.h>
-#include "../types.h"
-#include "list.h"
-#include "rbtree.h"
+#include "types.h"
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include "module.h"
+
+#ifdef HAVE_CPLUS_DEMANGLE
+extern char *cplus_demangle(const char *, int);
+
+static inline char *bfd_demangle(void __used *v, const char *c, int i)
+{
+ return cplus_demangle(c, i);
+}
+#else
+#ifdef NO_DEMANGLE
+static inline char *bfd_demangle(void __used *v, const char __used *c,
+ int __used i)
+{
+ return NULL;
+}
+#else
+#include <bfd.h>
+#endif
+#endif
+
+#ifndef DMGL_PARAMS
+#define DMGL_PARAMS (1 << 0) /* Include function args */
+#define DMGL_ANSI (1 << 1) /* Include const, volatile, etc */
+#endif
struct symbol {
struct rb_node rb_node;
@@ -13,6 +38,7 @@
u64 obj_start;
u64 hist_sum;
u64 *hist;
+ struct module *module;
void *priv;
char name[0];
};
@@ -20,8 +46,11 @@
struct dso {
struct list_head node;
struct rb_root syms;
- unsigned int sym_priv_size;
struct symbol *(*find_symbol)(struct dso *, u64 ip);
+ unsigned int sym_priv_size;
+ unsigned char adjust_symbols;
+ unsigned char slen_calculated;
+ unsigned char origin;
char name[0];
};
@@ -40,10 +69,12 @@
struct symbol *dso__find_symbol(struct dso *self, u64 ip);
int dso__load_kernel(struct dso *self, const char *vmlinux,
- symbol_filter_t filter, int verbose);
+ symbol_filter_t filter, int verbose, int modules);
+int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose);
int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
size_t dso__fprintf(struct dso *self, FILE *fp);
+char dso__symtab_origin(const struct dso *self);
void symbol__init(void);
#endif /* _PERF_SYMBOL_ */
diff --git a/tools/perf/types.h b/tools/perf/util/types.h
similarity index 100%
rename from tools/perf/types.h
rename to tools/perf/util/types.h
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index b8cfed7..68fe157 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -50,6 +50,7 @@
#include <unistd.h>
#include <stdio.h>
#include <sys/stat.h>
+#include <sys/statfs.h>
#include <fcntl.h>
#include <stddef.h>
#include <stdlib.h>
@@ -67,7 +68,6 @@
#include <assert.h>
#include <regex.h>
#include <utime.h>
-#ifndef __MINGW32__
#include <sys/wait.h>
#include <sys/poll.h>
#include <sys/socket.h>
@@ -81,20 +81,7 @@
#include <netdb.h>
#include <pwd.h>
#include <inttypes.h>
-#if defined(__CYGWIN__)
-#undef _XOPEN_SOURCE
-#include <grp.h>
-#define _XOPEN_SOURCE 600
-#include "compat/cygwin.h"
-#else
-#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */
-#include <grp.h>
-#define _ALL_SOURCE 1
-#endif
-#else /* __MINGW32__ */
-/* pull in Windows compatibility stuff */
-#include "compat/mingw.h"
-#endif /* __MINGW32__ */
+#include "../../../include/linux/magic.h"
#ifndef NO_ICONV
#include <iconv.h>
diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c
index 6350d65..4574ac2 100644
--- a/tools/perf/util/wrapper.c
+++ b/tools/perf/util/wrapper.c
@@ -7,7 +7,7 @@
* There's no pack memory to release - but stay close to the Git
* version so wrap this away:
*/
-static inline void release_pack_memory(size_t size, int flag)
+static inline void release_pack_memory(size_t size __used, int flag __used)
{
}
@@ -59,7 +59,8 @@
char *xstrndup(const char *str, size_t len)
{
char *p = memchr(str, '\0', len);
- return xmemdupz(str, p ? p - str : len);
+
+ return xmemdupz(str, p ? (size_t)(p - str) : len);
}
void *xrealloc(void *ptr, size_t size)
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 1eddae9..1150c6d5 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -95,8 +95,6 @@
if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
pent->fields.remote_irr = 1;
}
- if (!pent->fields.trig_mode)
- ioapic->irr &= ~(1 << idx);
return injected;
}
@@ -136,7 +134,8 @@
mask_after = ioapic->redirtbl[index].fields.mask;
if (mask_before != mask_after)
kvm_fire_mask_notifiers(ioapic->kvm, index, mask_after);
- if (ioapic->irr & (1 << index))
+ if (ioapic->redirtbl[index].fields.trig_mode == IOAPIC_LEVEL_TRIG
+ && ioapic->irr & (1 << index))
ioapic_service(ioapic, index);
break;
}
@@ -184,9 +183,10 @@
if (!level)
ioapic->irr &= ~mask;
else {
+ int edge = (entry.fields.trig_mode == IOAPIC_EDGE_TRIG);
ioapic->irr |= mask;
- if ((!entry.fields.trig_mode && old_irr != ioapic->irr)
- || !entry.fields.remote_irr)
+ if ((edge && old_irr != ioapic->irr) ||
+ (!edge && !entry.fields.remote_irr))
ret = ioapic_service(ioapic, irq);
}
}
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index a8bd466..ddc17f0 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -160,7 +160,8 @@
unsigned gsi = pin;
list_for_each_entry(e, &kvm->irq_routing, link)
- if (e->irqchip.irqchip == irqchip &&
+ if (e->type == KVM_IRQ_ROUTING_IRQCHIP &&
+ e->irqchip.irqchip == irqchip &&
e->irqchip.pin == pin) {
gsi = e->gsi;
break;
@@ -259,6 +260,7 @@
int delta;
e->gsi = ue->gsi;
+ e->type = ue->type;
switch (ue->type) {
case KVM_IRQ_ROUTING_IRQCHIP:
delta = 0;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 7645543..2884baf 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -746,6 +746,7 @@
cpumask_clear(cpus);
me = get_cpu();
+ spin_lock(&kvm->requests_lock);
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
vcpu = kvm->vcpus[i];
if (!vcpu)
@@ -762,6 +763,7 @@
smp_call_function_many(cpus, ack_flush, NULL, 1);
else
called = false;
+ spin_unlock(&kvm->requests_lock);
put_cpu();
free_cpumask_var(cpus);
return called;
@@ -982,6 +984,7 @@
kvm->mm = current->mm;
atomic_inc(&kvm->mm->mm_count);
spin_lock_init(&kvm->mmu_lock);
+ spin_lock_init(&kvm->requests_lock);
kvm_io_bus_init(&kvm->pio_bus);
mutex_init(&kvm->lock);
kvm_io_bus_init(&kvm->mmio_bus);
@@ -1194,6 +1197,8 @@
if (!new.dirty_bitmap)
goto out_free;
memset(new.dirty_bitmap, 0, dirty_bytes);
+ if (old.npages)
+ kvm_arch_flush_shadow(kvm);
}
#endif /* not defined CONFIG_S390 */