Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
diff --git a/MAINTAINERS b/MAINTAINERS
index 9c01fd9..e88d193 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1945,6 +1945,14 @@
L: netdev@vger.kernel.org
S: Supported
+POWERPC 4xx EMAC DRIVER
+P: Eugene Surovegin
+M: ebs@ebshome.net
+W: http://kernel.ebshome.net/emac/
+L: linuxppc-embedded@ozlabs.org
+L: netdev@vger.kernel.org
+S: Maintained
+
PNP SUPPORT
P: Adam Belay
M: ambx1@neo.rr.com
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fee8c5c..6d4f9ce 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1163,38 +1163,74 @@
be called ibmveth.
config IBM_EMAC
- bool "IBM PPC4xx EMAC driver support"
+ tristate "PowerPC 4xx on-chip Ethernet support"
depends on 4xx
- select CRC32
- ---help---
- This driver supports the IBM PPC4xx EMAC family of on-chip
- Ethernet controllers.
-
-config IBM_EMAC_ERRMSG
- bool "Verbose error messages"
- depends on IBM_EMAC && BROKEN
+ help
+ This driver supports the PowerPC 4xx EMAC family of on-chip
+ Ethernet controllers.
config IBM_EMAC_RXB
int "Number of receive buffers"
depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "64"
+ default "128"
config IBM_EMAC_TXB
int "Number of transmit buffers"
depends on IBM_EMAC
- default "128" if IBM_EMAC4
- default "8"
+ default "64"
-config IBM_EMAC_FGAP
- int "Frame gap"
+config IBM_EMAC_POLL_WEIGHT
+ int "MAL NAPI polling weight"
depends on IBM_EMAC
- default "8"
+ default "32"
-config IBM_EMAC_SKBRES
- int "Skb reserve amount"
+config IBM_EMAC_RX_COPY_THRESHOLD
+ int "RX skb copy threshold (bytes)"
+ depends on IBM_EMAC
+ default "256"
+
+config IBM_EMAC_RX_SKB_HEADROOM
+ int "Additional RX skb headroom (bytes)"
depends on IBM_EMAC
default "0"
+ help
+ Additional receive skb headroom. Note, that driver
+ will always reserve at least 2 bytes to make IP header
+ aligned, so usualy there is no need to add any additional
+ headroom.
+
+ If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+ bool "PHY Rx clock workaround"
+ depends on IBM_EMAC && (405EP || 440GX || 440EP)
+ help
+ Enable this if EMAC attached to a PHY which doesn't generate
+ RX clock if there is no link, if this is the case, you will
+ see "TX disable timeout" or "RX disable timeout" in the system
+ log.
+
+ If unsure, say N.
+
+config IBM_EMAC_DEBUG
+ bool "Debugging"
+ depends on IBM_EMAC
+ default n
+
+config IBM_EMAC_ZMII
+ bool
+ depends on IBM_EMAC && (NP405H || NP405L || 44x)
+ default y
+
+config IBM_EMAC_RGMII
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
+
+config IBM_EMAC_TAH
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
@@ -1775,6 +1811,7 @@
controller on the Renesas H8/300 processor.
source "drivers/net/fec_8xx/Kconfig"
+source "drivers/net/fs_enet/Kconfig"
endmenu
@@ -2201,8 +2238,8 @@
depends on PCI
---help---
This driver supports the 10Gbe XFrame NIC of S2IO.
- For help regarding driver compilation, installation and
- tuning please look into ~/drivers/net/s2io/README.txt.
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/s2io.txt>.
config S2IO_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1a84e04..7c313cb 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -203,3 +203,6 @@
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+obj-$(CONFIG_FS_ENET) += fs_enet/
+
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index dbecc6b..b8953de 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -871,10 +871,8 @@
if (ap->info)
pci_free_consistent(ap->pdev, sizeof(struct ace_info),
ap->info, ap->info_dma);
- if (ap->skb)
- kfree(ap->skb);
- if (ap->trace_buf)
- kfree(ap->trace_buf);
+ kfree(ap->skb);
+ kfree(ap->trace_buf);
if (dev->irq)
free_irq(dev->irq, dev);
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
old mode 100755
new mode 100644
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
old mode 100755
new mode 100644
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 7850691..332e995 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1606,8 +1606,7 @@
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
reset_mac(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (i = 0; i < NUM_RX_DMA; i++) {
if (aup->rx_db_inuse[i])
ReleaseDB(aup, aup->rx_db_inuse[i]);
@@ -1806,8 +1805,7 @@
if (dev) {
aup = (struct au1000_private *) dev->priv;
unregister_netdev(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (j = 0; j < NUM_RX_DMA; j++) {
if (aup->rx_db_inuse[j])
ReleaseDB(aup, aup->rx_db_inuse[j]);
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 282ebd1..0ee3e27 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/version.h>
+#include <linux/dma-mapping.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -1130,14 +1131,10 @@
*/
static void b44_free_consistent(struct b44 *bp)
{
- if (bp->rx_buffers) {
- kfree(bp->rx_buffers);
- bp->rx_buffers = NULL;
- }
- if (bp->tx_buffers) {
- kfree(bp->tx_buffers);
- bp->tx_buffers = NULL;
- }
+ kfree(bp->rx_buffers);
+ bp->rx_buffers = NULL;
+ kfree(bp->tx_buffers);
+ bp->tx_buffers = NULL;
if (bp->rx_ring) {
if (bp->flags & B44_FLAG_RX_RING_HACK) {
dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma,
@@ -1619,14 +1616,14 @@
cmd->advertising = 0;
if (bp->flags & B44_FLAG_ADV_10HALF)
- cmd->advertising |= ADVERTISE_10HALF;
+ cmd->advertising |= ADVERTISED_10baseT_Half;
if (bp->flags & B44_FLAG_ADV_10FULL)
- cmd->advertising |= ADVERTISE_10FULL;
+ cmd->advertising |= ADVERTISED_10baseT_Full;
if (bp->flags & B44_FLAG_ADV_100HALF)
- cmd->advertising |= ADVERTISE_100HALF;
+ cmd->advertising |= ADVERTISED_100baseT_Half;
if (bp->flags & B44_FLAG_ADV_100FULL)
- cmd->advertising |= ADVERTISE_100FULL;
- cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ cmd->advertising |= ADVERTISED_100baseT_Full;
+ cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
SPEED_100 : SPEED_10;
cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
@@ -2044,6 +2041,8 @@
b44_free_rings(bp);
spin_unlock_irq(&bp->lock);
+
+ free_irq(dev->irq, dev);
pci_disable_device(pdev);
return 0;
}
@@ -2060,6 +2059,9 @@
if (!netif_running(dev))
return 0;
+ if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev))
+ printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+
spin_lock_irq(&bp->lock);
b44_init_rings(bp);
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 60dba4a..73f2fcf 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -1689,10 +1689,8 @@
{
macio_unregister_driver(&bmac_driver);
- if (bmac_emergency_rxbuf != NULL) {
- kfree(bmac_emergency_rxbuf);
- bmac_emergency_rxbuf = NULL;
- }
+ kfree(bmac_emergency_rxbuf);
+ bmac_emergency_rxbuf = NULL;
}
MODULE_AUTHOR("Randy Gobbel/Paul Mackerras");
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 3a2ace0..11d2523 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -314,20 +314,16 @@
bp->tx_desc_ring, bp->tx_desc_mapping);
bp->tx_desc_ring = NULL;
}
- if (bp->tx_buf_ring) {
- kfree(bp->tx_buf_ring);
- bp->tx_buf_ring = NULL;
- }
+ kfree(bp->tx_buf_ring);
+ bp->tx_buf_ring = NULL;
if (bp->rx_desc_ring) {
pci_free_consistent(bp->pdev,
sizeof(struct rx_bd) * RX_DESC_CNT,
bp->rx_desc_ring, bp->rx_desc_mapping);
bp->rx_desc_ring = NULL;
}
- if (bp->rx_buf_ring) {
- kfree(bp->rx_buf_ring);
- bp->rx_buf_ring = NULL;
- }
+ kfree(bp->rx_buf_ring);
+ bp->rx_buf_ring = NULL;
}
static int
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6b9acc7..9c7feae 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -965,11 +965,8 @@
if(rxdr->desc)
pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma);
- if(txdr->buffer_info)
- kfree(txdr->buffer_info);
- if(rxdr->buffer_info)
- kfree(rxdr->buffer_info);
-
+ kfree(txdr->buffer_info);
+ kfree(rxdr->buffer_info);
return;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 6b72f6a..efbbda7 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -191,8 +191,8 @@
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
static int e1000_resume(struct pci_dev *pdev);
#endif
@@ -1149,7 +1149,8 @@
int size;
size = sizeof(struct e1000_buffer) * txdr->count;
- txdr->buffer_info = vmalloc(size);
+
+ txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
if(!txdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the transmit descriptor ring\n");
@@ -1366,7 +1367,7 @@
int size, desc_len;
size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vmalloc(size);
+ rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
if (!rxdr->buffer_info) {
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
@@ -4193,6 +4194,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int
e1000_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -4289,7 +4291,6 @@
return 0;
}
-#ifdef CONFIG_PM
static int
e1000_resume(struct pci_dev *pdev)
{
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index dcb3028..1ce2c67 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1797,10 +1797,9 @@
MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
MODULE_LICENSE("GPL");
-static int num_params;
-module_param_array(io, int, &num_params, 0);
-module_param_array(irq, int, &num_params, 0);
-module_param_array(mem, int, &num_params, 0);
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
new file mode 100644
index 0000000..6aaee67
--- /dev/null
+++ b/drivers/net/fs_enet/Kconfig
@@ -0,0 +1,20 @@
+config FS_ENET
+ tristate "Freescale Ethernet Driver"
+ depends on NET_ETHERNET && (CPM1 || CPM2)
+ select MII
+
+config FS_ENET_HAS_SCC
+ bool "Chip has an SCC usable for ethernet"
+ depends on FS_ENET && (CPM1 || CPM2)
+ default y
+
+config FS_ENET_HAS_FCC
+ bool "Chip has an FCC usable for ethernet"
+ depends on FS_ENET && CPM2
+ default y
+
+config FS_ENET_HAS_FEC
+ bool "Chip has an FEC usable for ethernet"
+ depends on FS_ENET && CPM1
+ default y
+
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
new file mode 100644
index 0000000..d6dd3f2
--- /dev/null
+++ b/drivers/net/fs_enet/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Freescale Ethernet controllers
+#
+
+obj-$(CONFIG_FS_ENET) += fs_enet.o
+
+obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o
+obj-$(CONFIG_8260) += mac-fcc.o
+
+fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
new file mode 100644
index 0000000..44fac73
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -0,0 +1,1226 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
+ * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <linux/vmalloc.h>
+#include <asm/pgtable.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+static char version[] __devinitdata =
+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n";
+
+MODULE_AUTHOR("Pantelis Antoniou <panto@intracom.gr>");
+MODULE_DESCRIPTION("Freescale Ethernet Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+MODULE_PARM(fs_enet_debug, "i");
+MODULE_PARM_DESC(fs_enet_debug,
+ "Freescale bitmapped debugging message enable value");
+
+int fs_enet_debug = -1; /* -1 == use FS_ENET_DEF_MSG_ENABLE as value */
+
+static void fs_set_multicast_list(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ (*fep->ops->set_multicast_list)(dev);
+}
+
+/* NAPI receive function */
+static int fs_enet_rx_napi(struct net_device *dev, int *budget)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ cbd_t *bdp;
+ struct sk_buff *skb, *skbn, *skbt;
+ int received = 0;
+ u16 pkt_len, sc;
+ int curidx;
+ int rx_work_limit = 0; /* pacify gcc */
+
+ rx_work_limit = min(dev->quota, *budget);
+
+ if (!netif_running(dev))
+ return 0;
+
+ /*
+ * First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ /* clear RX status bits for napi*/
+ (*fep->ops->napi_clear_rx_event)(dev);
+
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
+
+ curidx = bdp - fep->rx_bd_base;
+
+ /*
+ * Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((sc & BD_ENET_RX_LAST) == 0)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s rcv is not +last\n",
+ dev->name);
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
+ BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ /* Frame too long or too short. */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ fep->stats.rx_length_errors++;
+ /* Frame alignment */
+ if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
+ fep->stats.rx_frame_errors++;
+ /* CRC Error */
+ if (sc & BD_ENET_RX_CR)
+ fep->stats.rx_crc_errors++;
+ /* FIFO overrun */
+ if (sc & BD_ENET_RX_OV)
+ fep->stats.rx_crc_errors++;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ skbn = skb;
+
+ } else {
+
+ /* napi, got packet but no quota */
+ if (--rx_work_limit < 0)
+ break;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ /*
+ * Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
+ fep->stats.rx_bytes += pkt_len + 4;
+
+ if (pkt_len <= fpi->rx_copybreak) {
+ /* +2 to make IP header L1 cache aligned */
+ skbn = dev_alloc_skb(pkt_len + 2);
+ if (skbn != NULL) {
+ skb_reserve(skbn, 2); /* align IP header */
+ memcpy(skbn->data, skb->data, pkt_len);
+ /* swap */
+ skbt = skb;
+ skb = skbn;
+ skbn = skbt;
+ }
+ } else
+ skbn = dev_alloc_skb(ENET_RX_FRSIZE);
+
+ if (skbn != NULL) {
+ skb->dev = dev;
+ skb_put(skb, pkt_len); /* Make room */
+ skb->protocol = eth_type_trans(skb, dev);
+ received++;
+ netif_receive_skb(skb);
+ } else {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, dropping packet.\n",
+ dev->name);
+ fep->stats.rx_dropped++;
+ skbn = skb;
+ }
+ }
+
+ fep->rx_skbuff[curidx] = skbn;
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
+
+ /*
+ * Update BD pointer to next entry.
+ */
+ if ((sc & BD_ENET_RX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->rx_bd_base;
+
+ (*fep->ops->rx_bd_done)(dev);
+ }
+
+ fep->cur_rx = bdp;
+
+ dev->quota -= received;
+ *budget -= received;
+
+ if (rx_work_limit < 0)
+ return 1; /* not done */
+
+ /* done */
+ netif_rx_complete(dev);
+
+ (*fep->ops->napi_enable_rx)(dev);
+
+ return 0;
+}
+
+/* non NAPI receive function */
+static int fs_enet_rx_non_napi(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ cbd_t *bdp;
+ struct sk_buff *skb, *skbn, *skbt;
+ int received = 0;
+ u16 pkt_len, sc;
+ int curidx;
+ /*
+ * First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
+
+ curidx = bdp - fep->rx_bd_base;
+
+ /*
+ * Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((sc & BD_ENET_RX_LAST) == 0)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s rcv is not +last\n",
+ dev->name);
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
+ BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ /* Frame too long or too short. */
+ if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ fep->stats.rx_length_errors++;
+ /* Frame alignment */
+ if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
+ fep->stats.rx_frame_errors++;
+ /* CRC Error */
+ if (sc & BD_ENET_RX_CR)
+ fep->stats.rx_crc_errors++;
+ /* FIFO overrun */
+ if (sc & BD_ENET_RX_OV)
+ fep->stats.rx_crc_errors++;
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ skbn = skb;
+
+ } else {
+
+ skb = fep->rx_skbuff[curidx];
+
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ /*
+ * Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
+ fep->stats.rx_bytes += pkt_len + 4;
+
+ if (pkt_len <= fpi->rx_copybreak) {
+ /* +2 to make IP header L1 cache aligned */
+ skbn = dev_alloc_skb(pkt_len + 2);
+ if (skbn != NULL) {
+ skb_reserve(skbn, 2); /* align IP header */
+ memcpy(skbn->data, skb->data, pkt_len);
+ /* swap */
+ skbt = skb;
+ skb = skbn;
+ skbn = skbt;
+ }
+ } else
+ skbn = dev_alloc_skb(ENET_RX_FRSIZE);
+
+ if (skbn != NULL) {
+ skb->dev = dev;
+ skb_put(skb, pkt_len); /* Make room */
+ skb->protocol = eth_type_trans(skb, dev);
+ received++;
+ netif_rx(skb);
+ } else {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, dropping packet.\n",
+ dev->name);
+ fep->stats.rx_dropped++;
+ skbn = skb;
+ }
+ }
+
+ fep->rx_skbuff[curidx] = skbn;
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
+
+ /*
+ * Update BD pointer to next entry.
+ */
+ if ((sc & BD_ENET_RX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->rx_bd_base;
+
+ (*fep->ops->rx_bd_done)(dev);
+ }
+
+ fep->cur_rx = bdp;
+
+ return 0;
+}
+
+static void fs_enet_tx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int dirtyidx, do_wake, do_restart;
+ u16 sc;
+
+ spin_lock(&fep->lock);
+ bdp = fep->dirty_tx;
+
+ do_wake = do_restart = 0;
+ while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) {
+
+ dirtyidx = bdp - fep->tx_bd_base;
+
+ if (fep->tx_free == fep->tx_ring)
+ break;
+
+ skb = fep->tx_skbuff[dirtyidx];
+
+ /*
+ * Check for errors.
+ */
+ if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) {
+
+ if (sc & BD_ENET_TX_HB) /* No heartbeat */
+ fep->stats.tx_heartbeat_errors++;
+ if (sc & BD_ENET_TX_LC) /* Late collision */
+ fep->stats.tx_window_errors++;
+ if (sc & BD_ENET_TX_RL) /* Retrans limit */
+ fep->stats.tx_aborted_errors++;
+ if (sc & BD_ENET_TX_UN) /* Underrun */
+ fep->stats.tx_fifo_errors++;
+ if (sc & BD_ENET_TX_CSL) /* Carrier lost */
+ fep->stats.tx_carrier_errors++;
+
+ if (sc & (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
+ fep->stats.tx_errors++;
+ do_restart = 1;
+ }
+ } else
+ fep->stats.tx_packets++;
+
+ if (sc & BD_ENET_TX_READY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s HEY! Enet xmit interrupt and TX_READY.\n",
+ dev->name);
+
+ /*
+ * Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (sc & BD_ENET_TX_DEF)
+ fep->stats.collisions++;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ /*
+ * Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_irq(skb);
+ fep->tx_skbuff[dirtyidx] = NULL;
+
+ /*
+ * Update pointer to next buffer descriptor to be transmitted.
+ */
+ if ((sc & BD_ENET_TX_WRAP) == 0)
+ bdp++;
+ else
+ bdp = fep->tx_bd_base;
+
+ /*
+ * Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (!fep->tx_free++)
+ do_wake = 1;
+ }
+
+ fep->dirty_tx = bdp;
+
+ if (do_restart)
+ (*fep->ops->tx_restart)(dev);
+
+ spin_unlock(&fep->lock);
+
+ if (do_wake)
+ netif_wake_queue(dev);
+}
+
+/*
+ * The interrupt handler.
+ * This is called from the MPC core interrupt.
+ */
+static irqreturn_t
+fs_enet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+ u32 int_events;
+ u32 int_clr_events;
+ int nr, napi_ok;
+ int handled;
+
+ fep = netdev_priv(dev);
+ fpi = fep->fpi;
+
+ nr = 0;
+ while ((int_events = (*fep->ops->get_int_events)(dev)) != 0) {
+
+ nr++;
+
+ int_clr_events = int_events;
+ if (fpi->use_napi)
+ int_clr_events &= ~fep->ev_napi_rx;
+
+ (*fep->ops->clear_int_events)(dev, int_clr_events);
+
+ if (int_events & fep->ev_err)
+ (*fep->ops->ev_error)(dev, int_events);
+
+ if (int_events & fep->ev_rx) {
+ if (!fpi->use_napi)
+ fs_enet_rx_non_napi(dev);
+ else {
+ napi_ok = netif_rx_schedule_prep(dev);
+
+ (*fep->ops->napi_disable_rx)(dev);
+ (*fep->ops->clear_int_events)(dev, fep->ev_napi_rx);
+
+ /* NOTE: it is possible for FCCs in NAPI mode */
+ /* to submit a spurious interrupt while in poll */
+ if (napi_ok)
+ __netif_rx_schedule(dev);
+ }
+ }
+
+ if (int_events & fep->ev_tx)
+ fs_enet_tx(dev);
+ }
+
+ handled = nr > 0;
+ return IRQ_RETVAL(handled);
+}
+
+void fs_init_bds(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ struct sk_buff *skb;
+ int i;
+
+ fs_cleanup_bds(dev);
+
+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ fep->tx_free = fep->tx_ring;
+ fep->cur_rx = fep->rx_bd_base;
+
+ /*
+ * Initialize the receive buffer descriptors.
+ */
+ for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
+ skb = dev_alloc_skb(ENET_RX_FRSIZE);
+ if (skb == NULL) {
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s Memory squeeze, unable to allocate skb\n",
+ dev->name);
+ break;
+ }
+ fep->rx_skbuff[i] = skb;
+ skb->dev = dev;
+ CBDW_BUFADDR(bdp,
+ dma_map_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE));
+ CBDW_DATLEN(bdp, 0); /* zero */
+ CBDW_SC(bdp, BD_ENET_RX_EMPTY |
+ ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP));
+ }
+ /*
+ * if we failed, fillup remainder
+ */
+ for (; i < fep->rx_ring; i++, bdp++) {
+ fep->rx_skbuff[i] = NULL;
+ CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP);
+ }
+
+ /*
+ * ...and the same for transmit.
+ */
+ for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) {
+ fep->tx_skbuff[i] = NULL;
+ CBDW_BUFADDR(bdp, 0);
+ CBDW_DATLEN(bdp, 0);
+ CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP);
+ }
+}
+
+void fs_cleanup_bds(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct sk_buff *skb;
+ int i;
+
+ /*
+ * Reset SKB transmit buffers.
+ */
+ for (i = 0; i < fep->tx_ring; i++) {
+ if ((skb = fep->tx_skbuff[i]) == NULL)
+ continue;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ fep->tx_skbuff[i] = NULL;
+ dev_kfree_skb(skb);
+ }
+
+ /*
+ * Reset SKB receive buffers
+ */
+ for (i = 0; i < fep->rx_ring; i++) {
+ if ((skb = fep->rx_skbuff[i]) == NULL)
+ continue;
+
+ /* unmap */
+ dma_unmap_single(fep->dev, skb->data,
+ L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
+ DMA_FROM_DEVICE);
+
+ fep->rx_skbuff[i] = NULL;
+
+ dev_kfree_skb(skb);
+ }
+}
+
+/**********************************************************************************/
+
+static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ cbd_t *bdp;
+ int curidx;
+ u16 sc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fep->tx_lock, flags);
+
+ /*
+ * Fill in a Tx ring entry
+ */
+ bdp = fep->cur_tx;
+
+ if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) {
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&fep->tx_lock, flags);
+
+ /*
+ * Ooops. All transmit buffers are full. Bail out.
+ * This should not happen, since the tx queue should be stopped.
+ */
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s tx queue full!.\n", dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ curidx = bdp - fep->tx_bd_base;
+ /*
+ * Clear all of the status flags.
+ */
+ CBDC_SC(bdp, BD_ENET_TX_STATS);
+
+ /*
+ * Save skb pointer.
+ */
+ fep->tx_skbuff[curidx] = skb;
+
+ fep->stats.tx_bytes += skb->len;
+
+ /*
+ * Push the data cache so the CPM does not get stale memory data.
+ */
+ CBDW_BUFADDR(bdp, dma_map_single(fep->dev,
+ skb->data, skb->len, DMA_TO_DEVICE));
+ CBDW_DATLEN(bdp, skb->len);
+
+ dev->trans_start = jiffies;
+
+ /*
+ * If this was the last BD in the ring, start at the beginning again.
+ */
+ if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0)
+ fep->cur_tx++;
+ else
+ fep->cur_tx = fep->tx_bd_base;
+
+ if (!--fep->tx_free)
+ netif_stop_queue(dev);
+
+ /* Trigger transmission start */
+ sc = BD_ENET_TX_READY | BD_ENET_TX_INTR |
+ BD_ENET_TX_LAST | BD_ENET_TX_TC;
+
+ /* note that while FEC does not have this bit
+ * it marks it as available for software use
+ * yay for hw reuse :) */
+ if (skb->len <= 60)
+ sc |= BD_ENET_TX_PAD;
+ CBDS_SC(bdp, sc);
+
+ (*fep->ops->tx_kickstart)(dev);
+
+ spin_unlock_irqrestore(&fep->tx_lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static int fs_request_irq(struct net_device *dev, int irq, const char *name,
+ irqreturn_t (*irqf)(int irq, void *dev_id, struct pt_regs *regs))
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ (*fep->ops->pre_request_irq)(dev, irq);
+ return request_irq(irq, irqf, SA_SHIRQ, name, dev);
+}
+
+static void fs_free_irq(struct net_device *dev, int irq)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ free_irq(irq, dev);
+ (*fep->ops->post_free_irq)(dev, irq);
+}
+
+/**********************************************************************************/
+
+/* This interrupt occurs when the PHY detects a link change. */
+static irqreturn_t
+fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+
+ fep = netdev_priv(dev);
+ fpi = fep->fpi;
+
+ /*
+ * Acknowledge the interrupt if possible. If we have not
+ * found the PHY yet we can't process or acknowledge the
+ * interrupt now. Instead we ignore this interrupt for now,
+ * which we can do since it is edge triggered. It will be
+ * acknowledged later by fs_enet_open().
+ */
+ if (!fep->phy)
+ return IRQ_NONE;
+
+ fs_mii_ack_int(dev);
+ fs_mii_link_status_change_check(dev, 0);
+
+ return IRQ_HANDLED;
+}
+
+static void fs_timeout(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int wake = 0;
+
+ fep->stats.tx_errors++;
+
+ spin_lock_irqsave(&fep->lock, flags);
+
+ if (dev->flags & IFF_UP) {
+ (*fep->ops->stop)(dev);
+ (*fep->ops->restart)(dev);
+ }
+
+ wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ if (wake)
+ netif_wake_queue(dev);
+}
+
+static int fs_enet_open(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ int r;
+
+ /* Install our interrupt handler. */
+ r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Could not allocate FEC IRQ!", dev->name);
+ return -EINVAL;
+ }
+
+ /* Install our phy interrupt handler */
+ if (fpi->phy_irq != -1) {
+
+ r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Could not allocate PHY IRQ!", dev->name);
+ fs_free_irq(dev, fep->interrupt);
+ return -EINVAL;
+ }
+ }
+
+ fs_mii_startup(dev);
+ netif_carrier_off(dev);
+ fs_mii_link_status_change_check(dev, 1);
+
+ return 0;
+}
+
+static int fs_enet_close(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ unsigned long flags;
+
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+ fs_mii_shutdown(dev);
+
+ spin_lock_irqsave(&fep->lock, flags);
+ (*fep->ops->stop)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ /* release any irqs */
+ if (fpi->phy_irq != -1)
+ fs_free_irq(dev, fpi->phy_irq);
+ fs_free_irq(dev, fep->interrupt);
+
+ return 0;
+}
+
+static struct net_device_stats *fs_enet_get_stats(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return &fep->stats;
+}
+
+/*************************************************************************/
+
+static void fs_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_MODULE_NAME);
+ strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int fs_get_regs_len(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ return (*fep->ops->get_regs_len)(dev);
+}
+
+static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int r, len;
+
+ len = regs->len;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ r = (*fep->ops->get_regs)(dev, p, &len);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ if (r == 0)
+ regs->version = 0;
+}
+
+static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = mii_ethtool_gset(&fep->mii_if, cmd);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return rc;
+}
+
+static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = mii_ethtool_sset(&fep->mii_if, cmd);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return rc;
+}
+
+static int fs_nway_reset(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return mii_nway_restart(&fep->mii_if);
+}
+
+static u32 fs_get_msglevel(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ return fep->msg_enable;
+}
+
+static void fs_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fep->msg_enable = value;
+}
+
+static struct ethtool_ops fs_ethtool_ops = {
+ .get_drvinfo = fs_get_drvinfo,
+ .get_regs_len = fs_get_regs_len,
+ .get_settings = fs_get_settings,
+ .set_settings = fs_set_settings,
+ .nway_reset = fs_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = fs_get_msglevel,
+ .set_msglevel = fs_set_msglevel,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum, /* local! */
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_regs = fs_get_regs,
+};
+
+static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
+ unsigned long flags;
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irqsave(&fep->lock, flags);
+ rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL);
+ spin_unlock_irqrestore(&fep->lock, flags);
+ return rc;
+}
+
+extern int fs_mii_connect(struct net_device *dev);
+extern void fs_mii_disconnect(struct net_device *dev);
+
+static struct net_device *fs_init_instance(struct device *dev,
+ const struct fs_platform_info *fpi)
+{
+ struct net_device *ndev = NULL;
+ struct fs_enet_private *fep = NULL;
+ int privsize, i, r, err = 0, registered = 0;
+
+ /* guard */
+ if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX)
+ return ERR_PTR(-EINVAL);
+
+ privsize = sizeof(*fep) + (sizeof(struct sk_buff **) *
+ (fpi->rx_ring + fpi->tx_ring));
+
+ ndev = alloc_etherdev(privsize);
+ if (!ndev) {
+ err = -ENOMEM;
+ goto err;
+ }
+ SET_MODULE_OWNER(ndev);
+
+ fep = netdev_priv(ndev);
+ memset(fep, 0, privsize); /* clear everything */
+
+ fep->dev = dev;
+ dev_set_drvdata(dev, ndev);
+ fep->fpi = fpi;
+ if (fpi->init_ioports)
+ fpi->init_ioports();
+
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ if (fs_get_fec_index(fpi->fs_no) >= 0)
+ fep->ops = &fs_fec_ops;
+#endif
+
+#ifdef CONFIG_FS_ENET_HAS_SCC
+ if (fs_get_scc_index(fpi->fs_no) >=0 )
+ fep->ops = &fs_scc_ops;
+#endif
+
+#ifdef CONFIG_FS_ENET_HAS_FCC
+ if (fs_get_fcc_index(fpi->fs_no) >= 0)
+ fep->ops = &fs_fcc_ops;
+#endif
+
+ if (fep->ops == NULL) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s No matching ops found (%d).\n",
+ ndev->name, fpi->fs_no);
+ err = -EINVAL;
+ goto err;
+ }
+
+ r = (*fep->ops->setup_data)(ndev);
+ if (r != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s setup_data failed\n",
+ ndev->name);
+ err = r;
+ goto err;
+ }
+
+ /* point rx_skbuff, tx_skbuff */
+ fep->rx_skbuff = (struct sk_buff **)&fep[1];
+ fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring;
+
+ /* init locks */
+ spin_lock_init(&fep->lock);
+ spin_lock_init(&fep->tx_lock);
+
+ /*
+ * Set the Ethernet address.
+ */
+ for (i = 0; i < 6; i++)
+ ndev->dev_addr[i] = fpi->macaddr[i];
+
+ r = (*fep->ops->allocate_bd)(ndev);
+
+ if (fep->ring_base == NULL) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r);
+ err = r;
+ goto err;
+ }
+
+ /*
+ * Set receive and transmit descriptor base.
+ */
+ fep->rx_bd_base = fep->ring_base;
+ fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring;
+
+ /* initialize ring size variables */
+ fep->tx_ring = fpi->tx_ring;
+ fep->rx_ring = fpi->rx_ring;
+
+ /*
+ * The FEC Ethernet specific entries in the device structure.
+ */
+ ndev->open = fs_enet_open;
+ ndev->hard_start_xmit = fs_enet_start_xmit;
+ ndev->tx_timeout = fs_timeout;
+ ndev->watchdog_timeo = 2 * HZ;
+ ndev->stop = fs_enet_close;
+ ndev->get_stats = fs_enet_get_stats;
+ ndev->set_multicast_list = fs_set_multicast_list;
+ if (fpi->use_napi) {
+ ndev->poll = fs_enet_rx_napi;
+ ndev->weight = fpi->napi_weight;
+ }
+ ndev->ethtool_ops = &fs_ethtool_ops;
+ ndev->do_ioctl = fs_ioctl;
+
+ init_timer(&fep->phy_timer_list);
+
+ netif_carrier_off(ndev);
+
+ err = register_netdev(ndev);
+ if (err != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s register_netdev failed.\n", ndev->name);
+ goto err;
+ }
+ registered = 1;
+
+ err = fs_mii_connect(ndev);
+ if (err != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s fs_mii_connect failed.\n", ndev->name);
+ goto err;
+ }
+
+ return ndev;
+
+ err:
+ if (ndev != NULL) {
+
+ if (registered)
+ unregister_netdev(ndev);
+
+ if (fep != NULL) {
+ (*fep->ops->free_bd)(ndev);
+ (*fep->ops->cleanup_data)(ndev);
+ }
+
+ free_netdev(ndev);
+ }
+
+ dev_set_drvdata(dev, NULL);
+
+ return ERR_PTR(err);
+}
+
+static int fs_cleanup_instance(struct net_device *ndev)
+{
+ struct fs_enet_private *fep;
+ const struct fs_platform_info *fpi;
+ struct device *dev;
+
+ if (ndev == NULL)
+ return -EINVAL;
+
+ fep = netdev_priv(ndev);
+ if (fep == NULL)
+ return -EINVAL;
+
+ fpi = fep->fpi;
+
+ fs_mii_disconnect(ndev);
+
+ unregister_netdev(ndev);
+
+ dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
+ fep->ring_base, fep->ring_mem_addr);
+
+ /* reset it */
+ (*fep->ops->cleanup_data)(ndev);
+
+ dev = fep->dev;
+ if (dev != NULL) {
+ dev_set_drvdata(dev, NULL);
+ fep->dev = NULL;
+ }
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+/**************************************************************************************/
+
+/* handy pointer to the immap */
+void *fs_enet_immap = NULL;
+
+static int setup_immap(void)
+{
+ phys_addr_t paddr = 0;
+ unsigned long size = 0;
+
+#ifdef CONFIG_CPM1
+ paddr = IMAP_ADDR;
+ size = 0x10000; /* map 64K */
+#endif
+
+#ifdef CONFIG_CPM2
+ paddr = CPM_MAP_ADDR;
+ size = 0x40000; /* map 256 K */
+#endif
+ fs_enet_immap = ioremap(paddr, size);
+ if (fs_enet_immap == NULL)
+ return -EBADF; /* XXX ahem; maybe just BUG_ON? */
+
+ return 0;
+}
+
+static void cleanup_immap(void)
+{
+ if (fs_enet_immap != NULL) {
+ iounmap(fs_enet_immap);
+ fs_enet_immap = NULL;
+ }
+}
+
+/**************************************************************************************/
+
+static int __devinit fs_enet_probe(struct device *dev)
+{
+ struct net_device *ndev;
+
+ /* no fixup - no device */
+ if (dev->platform_data == NULL) {
+ printk(KERN_INFO "fs_enet: "
+ "probe called with no platform data; "
+ "remove unused devices\n");
+ return -ENODEV;
+ }
+
+ ndev = fs_init_instance(dev, dev->platform_data);
+ if (IS_ERR(ndev))
+ return PTR_ERR(ndev);
+ return 0;
+}
+
+static int fs_enet_remove(struct device *dev)
+{
+ return fs_cleanup_instance(dev_get_drvdata(dev));
+}
+
+static struct device_driver fs_enet_fec_driver = {
+ .name = "fsl-cpm-fec",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static struct device_driver fs_enet_scc_driver = {
+ .name = "fsl-cpm-scc",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static struct device_driver fs_enet_fcc_driver = {
+ .name = "fsl-cpm-fcc",
+ .bus = &platform_bus_type,
+ .probe = fs_enet_probe,
+ .remove = fs_enet_remove,
+#ifdef CONFIG_PM
+/* .suspend = fs_enet_suspend, TODO */
+/* .resume = fs_enet_resume, TODO */
+#endif
+};
+
+static int __init fs_init(void)
+{
+ int r;
+
+ printk(KERN_INFO
+ "%s", version);
+
+ r = setup_immap();
+ if (r != 0)
+ return r;
+ r = driver_register(&fs_enet_fec_driver);
+ if (r != 0)
+ goto err;
+
+ r = driver_register(&fs_enet_fcc_driver);
+ if (r != 0)
+ goto err;
+
+ r = driver_register(&fs_enet_scc_driver);
+ if (r != 0)
+ goto err;
+
+ return 0;
+err:
+ cleanup_immap();
+ return r;
+
+}
+
+static void __exit fs_cleanup(void)
+{
+ driver_unregister(&fs_enet_fec_driver);
+ driver_unregister(&fs_enet_fcc_driver);
+ driver_unregister(&fs_enet_scc_driver);
+ cleanup_immap();
+}
+
+/**************************************************************************************/
+
+module_init(fs_init);
+module_exit(fs_cleanup);
diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c
new file mode 100644
index 0000000..c677037
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet-mii.c
@@ -0,0 +1,507 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
+ * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+/*
+ * Generic PHY support.
+ * Should work for all PHYs, but link change is detected by polling
+ */
+
+static void generic_timer_callback(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->phy_timer_list.expires = jiffies + HZ / 2;
+
+ add_timer(&fep->phy_timer_list);
+
+ fs_mii_link_status_change_check(dev, 0);
+}
+
+static void generic_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */
+ fep->phy_timer_list.data = (unsigned long)dev;
+ fep->phy_timer_list.function = generic_timer_callback;
+ add_timer(&fep->phy_timer_list);
+}
+
+static void generic_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ del_timer_sync(&fep->phy_timer_list);
+}
+
+/* ------------------------------------------------------------------------- */
+/* The Davicom DM9161 is used on the NETTA board */
+
+/* register definitions */
+
+#define MII_DM9161_ANAR 4 /* Aux. Config Register */
+#define MII_DM9161_ACR 16 /* Aux. Config Register */
+#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */
+#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */
+#define MII_DM9161_INTR 21 /* Interrupt Register */
+#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */
+#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */
+
+static void dm9161_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000);
+ /* Start autonegotiation */
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200);
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ*8);
+}
+
+static void dm9161_ack_int(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR);
+}
+
+static void dm9161_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00);
+}
+
+/**********************************************************************************/
+
+static const struct phy_info phy_info[] = {
+ {
+ .id = 0x00181b88,
+ .name = "DM9161",
+ .startup = dm9161_startup,
+ .ack_int = dm9161_ack_int,
+ .shutdown = dm9161_shutdown,
+ }, {
+ .id = 0,
+ .name = "GENERIC",
+ .startup = generic_startup,
+ .shutdown = generic_shutdown,
+ },
+};
+
+/**********************************************************************************/
+
+static int phy_id_detect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ int i, r, start, end, phytype, physubtype;
+ const struct phy_info *phy;
+ int phy_hwid, phy_id;
+
+ phy_hwid = -1;
+ fep->phy = NULL;
+
+ /* auto-detect? */
+ if (fpi->phy_addr == -1) {
+ start = 1;
+ end = 32;
+ } else { /* direct */
+ start = fpi->phy_addr;
+ end = start + 1;
+ }
+
+ for (phy_id = start; phy_id < end; phy_id++) {
+ /* skip already used phy addresses on this bus */
+ if (bus->usage_map & (1 << phy_id))
+ continue;
+ r = fs_mii_read(dev, phy_id, MII_PHYSID1);
+ if (r == -1 || (phytype = (r & 0xffff)) == 0xffff)
+ continue;
+ r = fs_mii_read(dev, phy_id, MII_PHYSID2);
+ if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff)
+ continue;
+ phy_hwid = (phytype << 16) | physubtype;
+ if (phy_hwid != -1)
+ break;
+ }
+
+ if (phy_hwid == -1) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s No PHY detected! range=0x%02x-0x%02x\n",
+ dev->name, start, end);
+ return -1;
+ }
+
+ for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++)
+ if (phy->id == (phy_hwid >> 4) || phy->id == 0)
+ break;
+
+ if (i >= ARRAY_SIZE(phy_info)) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s PHY id 0x%08x is not supported!\n",
+ dev->name, phy_hwid);
+ return -1;
+ }
+
+ fep->phy = phy;
+
+ /* mark this address as used */
+ bus->usage_map |= (1 << phy_id);
+
+ printk(KERN_INFO DRV_MODULE_NAME
+ ": %s Phy @ 0x%x, type %s (0x%08x)%s\n",
+ dev->name, phy_id, fep->phy->name, phy_hwid,
+ fpi->phy_addr == -1 ? " (auto-detected)" : "");
+
+ return phy_id;
+}
+
+void fs_mii_startup(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->startup)
+ (*fep->phy->startup) (dev);
+}
+
+void fs_mii_shutdown(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->shutdown)
+ (*fep->phy->shutdown) (dev);
+}
+
+void fs_mii_ack_int(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->phy->ack_int)
+ (*fep->phy->ack_int) (dev);
+}
+
+#define MII_LINK 0x0001
+#define MII_HALF 0x0002
+#define MII_FULL 0x0004
+#define MII_BASE4 0x0008
+#define MII_10M 0x0010
+#define MII_100M 0x0020
+#define MII_1G 0x0040
+#define MII_10G 0x0080
+
+/* return full mii info at one gulp, with a usable form */
+static unsigned int mii_full_status(struct mii_if_info *mii)
+{
+ unsigned int status;
+ int bmsr, adv, lpa, neg;
+ struct fs_enet_private* fep = netdev_priv(mii->dev);
+
+ /* first, a dummy read, needed to latch some MII phys */
+ (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+ bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
+
+ /* no link */
+ if ((bmsr & BMSR_LSTATUS) == 0)
+ return 0;
+
+ status = MII_LINK;
+
+ /* Lets look what ANEG says if it's supported - otherwize we shall
+ take the right values from the platform info*/
+ if(!mii->force_media) {
+ /* autoneg not completed; don't bother */
+ if ((bmsr & BMSR_ANEGCOMPLETE) == 0)
+ return 0;
+
+ adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE);
+ lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA);
+
+ neg = lpa & adv;
+ } else {
+ neg = fep->fpi->bus_info->lpa;
+ }
+
+ if (neg & LPA_100FULL)
+ status |= MII_FULL | MII_100M;
+ else if (neg & LPA_100BASE4)
+ status |= MII_FULL | MII_BASE4 | MII_100M;
+ else if (neg & LPA_100HALF)
+ status |= MII_HALF | MII_100M;
+ else if (neg & LPA_10FULL)
+ status |= MII_FULL | MII_10M;
+ else
+ status |= MII_HALF | MII_10M;
+
+ return status;
+}
+
+void fs_mii_link_status_change_check(struct net_device *dev, int init_media)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct mii_if_info *mii = &fep->mii_if;
+ unsigned int mii_status;
+ int ok_to_print, link, duplex, speed;
+ unsigned long flags;
+
+ ok_to_print = netif_msg_link(fep);
+
+ mii_status = mii_full_status(mii);
+
+ if (!init_media && mii_status == fep->last_mii_status)
+ return;
+
+ fep->last_mii_status = mii_status;
+
+ link = !!(mii_status & MII_LINK);
+ duplex = !!(mii_status & MII_FULL);
+ speed = (mii_status & MII_100M) ? 100 : 10;
+
+ if (link == 0) {
+ netif_carrier_off(mii->dev);
+ netif_stop_queue(dev);
+ if (!init_media) {
+ spin_lock_irqsave(&fep->lock, flags);
+ (*fep->ops->stop)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+ }
+
+ if (ok_to_print)
+ printk(KERN_INFO "%s: link down\n", mii->dev->name);
+
+ } else {
+
+ mii->full_duplex = duplex;
+
+ netif_carrier_on(mii->dev);
+
+ spin_lock_irqsave(&fep->lock, flags);
+ fep->duplex = duplex;
+ fep->speed = speed;
+ (*fep->ops->restart)(dev);
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ netif_start_queue(dev);
+
+ if (ok_to_print)
+ printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n",
+ dev->name, speed, duplex ? "full" : "half");
+ }
+}
+
+/**********************************************************************************/
+
+int fs_mii_read(struct net_device *dev, int phy_id, int location)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&bus->mii_lock, flags);
+ ret = (*bus->mii_read)(bus, phy_id, location);
+ spin_unlock_irqrestore(&bus->mii_lock, flags);
+
+ return ret;
+}
+
+void fs_mii_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bus->mii_lock, flags);
+ (*bus->mii_write)(bus, phy_id, location, value);
+ spin_unlock_irqrestore(&bus->mii_lock, flags);
+}
+
+/*****************************************************************************/
+
+/* list of all registered mii buses */
+static LIST_HEAD(fs_mii_bus_list);
+
+static struct fs_enet_mii_bus *lookup_bus(int method, int id)
+{
+ struct list_head *ptr;
+ struct fs_enet_mii_bus *bus;
+
+ list_for_each(ptr, &fs_mii_bus_list) {
+ bus = list_entry(ptr, struct fs_enet_mii_bus, list);
+ if (bus->bus_info->method == method &&
+ bus->bus_info->id == id)
+ return bus;
+ }
+ return NULL;
+}
+
+static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi)
+{
+ struct fs_enet_mii_bus *bus;
+ int ret = 0;
+
+ bus = kmalloc(sizeof(*bus), GFP_KERNEL);
+ if (bus == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ memset(bus, 0, sizeof(*bus));
+ spin_lock_init(&bus->mii_lock);
+ bus->bus_info = bi;
+ bus->refs = 0;
+ bus->usage_map = 0;
+
+ /* perform initialization */
+ switch (bi->method) {
+
+ case fsmii_fixed:
+ ret = fs_mii_fixed_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+
+ case fsmii_bitbang:
+ ret = fs_mii_bitbang_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ case fsmii_fec:
+ ret = fs_mii_fec_init(bus);
+ if (ret != 0)
+ goto err;
+ break;
+#endif
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+
+ list_add(&bus->list, &fs_mii_bus_list);
+
+ return bus;
+
+err:
+ if (bus)
+ kfree(bus);
+ return ERR_PTR(ret);
+}
+
+static void destroy_bus(struct fs_enet_mii_bus *bus)
+{
+ /* remove from bus list */
+ list_del(&bus->list);
+
+ /* nothing more needed */
+ kfree(bus);
+}
+
+int fs_mii_connect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ struct fs_enet_mii_bus *bus = NULL;
+
+ /* check method validity */
+ switch (fpi->bus_info->method) {
+ case fsmii_fixed:
+ case fsmii_bitbang:
+ break;
+#ifdef CONFIG_FS_ENET_HAS_FEC
+ case fsmii_fec:
+ break;
+#endif
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s Unknown MII bus method (%d)!\n",
+ dev->name, fpi->bus_info->method);
+ return -EINVAL;
+ }
+
+ bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id);
+
+ /* if not found create new bus */
+ if (bus == NULL) {
+ bus = create_bus(fpi->bus_info);
+ if (IS_ERR(bus)) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s MII bus creation failure!\n", dev->name);
+ return PTR_ERR(bus);
+ }
+ }
+
+ bus->refs++;
+
+ fep->mii_bus = bus;
+
+ fep->mii_if.dev = dev;
+ fep->mii_if.phy_id_mask = 0x1f;
+ fep->mii_if.reg_num_mask = 0x1f;
+ fep->mii_if.mdio_read = fs_mii_read;
+ fep->mii_if.mdio_write = fs_mii_write;
+ fep->mii_if.force_media = fpi->bus_info->disable_aneg;
+ fep->mii_if.phy_id = phy_id_detect(dev);
+
+ return 0;
+}
+
+void fs_mii_disconnect(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ struct fs_enet_mii_bus *bus = NULL;
+
+ bus = fep->mii_bus;
+ fep->mii_bus = NULL;
+
+ if (--bus->refs <= 0)
+ destroy_bus(bus);
+}
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
new file mode 100644
index 0000000..1105543
--- /dev/null
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -0,0 +1,245 @@
+#ifndef FS_ENET_H
+#define FS_ENET_H
+
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/list.h>
+
+#include <linux/fs_enet_pd.h>
+
+#include <asm/dma-mapping.h>
+
+#ifdef CONFIG_CPM1
+#include <asm/commproc.h>
+#endif
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+#endif
+
+/* hw driver ops */
+struct fs_ops {
+ int (*setup_data)(struct net_device *dev);
+ int (*allocate_bd)(struct net_device *dev);
+ void (*free_bd)(struct net_device *dev);
+ void (*cleanup_data)(struct net_device *dev);
+ void (*set_multicast_list)(struct net_device *dev);
+ void (*restart)(struct net_device *dev);
+ void (*stop)(struct net_device *dev);
+ void (*pre_request_irq)(struct net_device *dev, int irq);
+ void (*post_free_irq)(struct net_device *dev, int irq);
+ void (*napi_clear_rx_event)(struct net_device *dev);
+ void (*napi_enable_rx)(struct net_device *dev);
+ void (*napi_disable_rx)(struct net_device *dev);
+ void (*rx_bd_done)(struct net_device *dev);
+ void (*tx_kickstart)(struct net_device *dev);
+ u32 (*get_int_events)(struct net_device *dev);
+ void (*clear_int_events)(struct net_device *dev, u32 int_events);
+ void (*ev_error)(struct net_device *dev, u32 int_events);
+ int (*get_regs)(struct net_device *dev, void *p, int *sizep);
+ int (*get_regs_len)(struct net_device *dev);
+ void (*tx_restart)(struct net_device *dev);
+};
+
+struct phy_info {
+ unsigned int id;
+ const char *name;
+ void (*startup) (struct net_device * dev);
+ void (*shutdown) (struct net_device * dev);
+ void (*ack_int) (struct net_device * dev);
+};
+
+/* The FEC stores dest/src/type, data, and checksum for receive packets.
+ */
+#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */
+#define MIN_MTU 46 /* this is data size */
+#define CRC_LEN 4
+
+#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN)
+#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN)
+
+/* Must be a multiple of 32 (to cover both FEC & FCC) */
+#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE + 31) & ~31)
+/* This is needed so that invalidate_xxx wont invalidate too much */
+#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE)
+
+struct fs_enet_mii_bus {
+ struct list_head list;
+ spinlock_t mii_lock;
+ const struct fs_mii_bus_info *bus_info;
+ int refs;
+ u32 usage_map;
+
+ int (*mii_read)(struct fs_enet_mii_bus *bus,
+ int phy_id, int location);
+
+ void (*mii_write)(struct fs_enet_mii_bus *bus,
+ int phy_id, int location, int value);
+
+ union {
+ struct {
+ unsigned int mii_speed;
+ void *fecp;
+ } fec;
+
+ struct {
+ /* note that the actual port size may */
+ /* be different; cpm(s) handle it OK */
+ u8 mdio_msk;
+ u8 *mdio_dir;
+ u8 *mdio_dat;
+ u8 mdc_msk;
+ u8 *mdc_dir;
+ u8 *mdc_dat;
+ } bitbang;
+
+ struct {
+ u16 lpa;
+ } fixed;
+ };
+};
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus);
+int fs_mii_fixed_init(struct fs_enet_mii_bus *bus);
+int fs_mii_fec_init(struct fs_enet_mii_bus *bus);
+
+struct fs_enet_private {
+ struct device *dev; /* pointer back to the device (must be initialized first) */
+ spinlock_t lock; /* during all ops except TX pckt processing */
+ spinlock_t tx_lock; /* during fs_start_xmit and fs_tx */
+ const struct fs_platform_info *fpi;
+ const struct fs_ops *ops;
+ int rx_ring, tx_ring;
+ dma_addr_t ring_mem_addr;
+ void *ring_base;
+ struct sk_buff **rx_skbuff;
+ struct sk_buff **tx_skbuff;
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *dirty_tx; /* ring entries to be free()ed. */
+ cbd_t *cur_rx;
+ cbd_t *cur_tx;
+ int tx_free;
+ struct net_device_stats stats;
+ struct timer_list phy_timer_list;
+ const struct phy_info *phy;
+ u32 msg_enable;
+ struct mii_if_info mii_if;
+ unsigned int last_mii_status;
+ struct fs_enet_mii_bus *mii_bus;
+ int interrupt;
+
+ int duplex, speed; /* current settings */
+
+ /* event masks */
+ u32 ev_napi_rx; /* mask of NAPI rx events */
+ u32 ev_rx; /* rx event mask */
+ u32 ev_tx; /* tx event mask */
+ u32 ev_err; /* error event mask */
+
+ u16 bd_rx_empty; /* mask of BD rx empty */
+ u16 bd_rx_err; /* mask of BD rx errors */
+
+ union {
+ struct {
+ int idx; /* FEC1 = 0, FEC2 = 1 */
+ void *fecp; /* hw registers */
+ u32 hthi, htlo; /* state for multicast */
+ } fec;
+
+ struct {
+ int idx; /* FCC1-3 = 0-2 */
+ void *fccp; /* hw registers */
+ void *ep; /* parameter ram */
+ void *fcccp; /* hw registers cont. */
+ void *mem; /* FCC DPRAM */
+ u32 gaddrh, gaddrl; /* group address */
+ } fcc;
+
+ struct {
+ int idx; /* FEC1 = 0, FEC2 = 1 */
+ void *sccp; /* hw registers */
+ void *ep; /* parameter ram */
+ u32 hthi, htlo; /* state for multicast */
+ } scc;
+
+ };
+};
+
+/***************************************************************************/
+
+int fs_mii_read(struct net_device *dev, int phy_id, int location);
+void fs_mii_write(struct net_device *dev, int phy_id, int location, int value);
+
+void fs_mii_startup(struct net_device *dev);
+void fs_mii_shutdown(struct net_device *dev);
+void fs_mii_ack_int(struct net_device *dev);
+
+void fs_mii_link_status_change_check(struct net_device *dev, int init_media);
+
+void fs_init_bds(struct net_device *dev);
+void fs_cleanup_bds(struct net_device *dev);
+
+/***************************************************************************/
+
+#define DRV_MODULE_NAME "fs_enet"
+#define PFX DRV_MODULE_NAME ": "
+#define DRV_MODULE_VERSION "1.0"
+#define DRV_MODULE_RELDATE "Aug 8, 2005"
+
+/***************************************************************************/
+
+int fs_enet_platform_init(void);
+void fs_enet_platform_cleanup(void);
+
+/***************************************************************************/
+
+/* buffer descriptor access macros */
+
+/* access macros */
+#if defined(CONFIG_CPM1)
+/* for a a CPM1 __raw_xxx's are sufficient */
+#define __cbd_out32(addr, x) __raw_writel(x, addr)
+#define __cbd_out16(addr, x) __raw_writew(x, addr)
+#define __cbd_in32(addr) __raw_readl(addr)
+#define __cbd_in16(addr) __raw_readw(addr)
+#else
+/* for others play it safe */
+#define __cbd_out32(addr, x) out_be32(addr, x)
+#define __cbd_out16(addr, x) out_be16(addr, x)
+#define __cbd_in32(addr) in_be32(addr)
+#define __cbd_in16(addr) in_be16(addr)
+#endif
+
+/* write */
+#define CBDW_SC(_cbd, _sc) __cbd_out16(&(_cbd)->cbd_sc, (_sc))
+#define CBDW_DATLEN(_cbd, _datlen) __cbd_out16(&(_cbd)->cbd_datlen, (_datlen))
+#define CBDW_BUFADDR(_cbd, _bufaddr) __cbd_out32(&(_cbd)->cbd_bufaddr, (_bufaddr))
+
+/* read */
+#define CBDR_SC(_cbd) __cbd_in16(&(_cbd)->cbd_sc)
+#define CBDR_DATLEN(_cbd) __cbd_in16(&(_cbd)->cbd_datlen)
+#define CBDR_BUFADDR(_cbd) __cbd_in32(&(_cbd)->cbd_bufaddr)
+
+/* set bits */
+#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc))
+
+/* clear bits */
+#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc))
+
+/*******************************************************************/
+
+extern const struct fs_ops fs_fec_ops;
+extern const struct fs_ops fs_fcc_ops;
+extern const struct fs_ops fs_scc_ops;
+
+/*******************************************************************/
+
+/* handy pointer to the immap */
+extern void *fs_enet_immap;
+
+/*******************************************************************/
+
+#endif
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
new file mode 100644
index 0000000..a940b96
--- /dev/null
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -0,0 +1,578 @@
+/*
+ * FCC driver for Motorola MPC82xx (PQ2).
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+/* FCC access macros */
+
+#define __fcc_out32(addr, x) out_be32((unsigned *)addr, x)
+#define __fcc_out16(addr, x) out_be16((unsigned short *)addr, x)
+#define __fcc_out8(addr, x) out_8((unsigned char *)addr, x)
+#define __fcc_in32(addr) in_be32((unsigned *)addr)
+#define __fcc_in16(addr) in_be16((unsigned short *)addr)
+#define __fcc_in8(addr) in_8((unsigned char *)addr)
+
+/* parameter space */
+
+/* write, read, set bits, clear bits */
+#define W32(_p, _m, _v) __fcc_out32(&(_p)->_m, (_v))
+#define R32(_p, _m) __fcc_in32(&(_p)->_m)
+#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v))
+#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v))
+
+#define W16(_p, _m, _v) __fcc_out16(&(_p)->_m, (_v))
+#define R16(_p, _m) __fcc_in16(&(_p)->_m)
+#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v))
+#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v))
+
+#define W8(_p, _m, _v) __fcc_out8(&(_p)->_m, (_v))
+#define R8(_p, _m) __fcc_in8(&(_p)->_m)
+#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v))
+#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v))
+
+/*************************************************/
+
+#define FCC_MAX_MULTICAST_ADDRS 64
+
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
+#define mk_mii_end 0
+
+#define MAX_CR_CMD_LOOPS 10000
+
+static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 mcn, u32 op)
+{
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ cpm2_map_t *immap = fs_enet_immap;
+ cpm_cpm2_t *cpmp = &immap->im_cpm;
+ u32 v;
+ int i;
+
+ /* Currently I don't know what feature call will look like. But
+ I guess there'd be something like do_cpm_cmd() which will require page & sblock */
+ v = mk_cr_cmd(fpi->cp_page, fpi->cp_block, mcn, op);
+ W32(cpmp, cp_cpcr, v | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
+ break;
+
+ if (i >= MAX_CR_CMD_LOOPS) {
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq(pdev, 0);
+
+ /* Attach the memory for the FCC Parameter RAM */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram");
+ fep->fcc.ep = (void *)r->start;
+
+ if (fep->fcc.ep == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs");
+ fep->fcc.fccp = (void *)r->start;
+
+ if (fep->fcc.fccp == NULL)
+ return -EINVAL;
+
+ fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c;
+
+ if (fep->fcc.fcccp == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB)
+#define FCC_RX_EVENT (FCC_ENET_RXF)
+#define FCC_TX_EVENT (FCC_ENET_TXB)
+#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->fcc.idx = fs_get_fcc_index(fpi->fs_no);
+ if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */
+ return -EINVAL;
+
+ fep->fcc.mem = (void *)fpi->mem_offset;
+
+ if (do_pd_setup(fep) != 0)
+ return -EINVAL;
+
+ fep->ev_napi_rx = FCC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = FCC_RX_EVENT;
+ fep->ev_tx = FCC_TX_EVENT;
+ fep->ev_err = FCC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_base = dma_alloc_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), &fep->ring_mem_addr,
+ GFP_KERNEL);
+ if (fep->ring_base == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ if (fep->ring_base)
+ dma_free_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
+ fep->ring_base, fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ S32(fccp, fcc_fpsmr, FCC_PSMR_PRO);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_enet_t *ep = fep->fcc.ep;
+
+ W32(ep, fen_gaddrh, 0);
+ W32(ep, fen_gaddrl, 0);
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 *mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_enet_t *ep = fep->fcc.ep;
+ u16 taddrh, taddrm, taddrl;
+
+ taddrh = ((u16)mac[5] << 8) | mac[4];
+ taddrm = ((u16)mac[3] << 8) | mac[2];
+ taddrl = ((u16)mac[1] << 8) | mac[0];
+
+ W16(ep, fen_taddrh, taddrh);
+ W16(ep, fen_taddrm, taddrm);
+ W16(ep, fen_taddrl, taddrl);
+ fcc_cr_cmd(fep, 0x0C, CPM_CR_SET_GADDR);
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+ fcc_enet_t *ep = fep->fcc.ep;
+
+ /* clear promiscuous always */
+ C32(fccp, fcc_fpsmr, FCC_PSMR_PRO);
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > FCC_MAX_MULTICAST_ADDRS) {
+
+ W32(ep, fen_gaddrh, 0xffffffff);
+ W32(ep, fen_gaddrl, 0xffffffff);
+ }
+
+ /* read back */
+ fep->fcc.gaddrh = R32(ep, fen_gaddrh);
+ fep->fcc.gaddrl = R32(ep, fen_gaddrl);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+static void restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+ fcc_t *fccp = fep->fcc.fccp;
+ fcc_c_t *fcccp = fep->fcc.fcccp;
+ fcc_enet_t *ep = fep->fcc.ep;
+ dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
+ u16 paddrh, paddrm, paddrl;
+ u16 mem_addr;
+ const unsigned char *mac;
+ int i;
+
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+
+ /* clear everything (slow & steady does it) */
+ for (i = 0; i < sizeof(*ep); i++)
+ __fcc_out8((char *)ep + i, 0);
+
+ /* get physical address */
+ rx_bd_base_phys = fep->ring_mem_addr;
+ tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring;
+
+ /* point to bds */
+ W32(ep, fen_genfcc.fcc_rbase, rx_bd_base_phys);
+ W32(ep, fen_genfcc.fcc_tbase, tx_bd_base_phys);
+
+ /* Set maximum bytes per receive buffer.
+ * It must be a multiple of 32.
+ */
+ W16(ep, fen_genfcc.fcc_mrblr, PKT_MAXBLR_SIZE);
+
+ W32(ep, fen_genfcc.fcc_rstate, (CPMFCR_GBL | CPMFCR_EB) << 24);
+ W32(ep, fen_genfcc.fcc_tstate, (CPMFCR_GBL | CPMFCR_EB) << 24);
+
+ /* Allocate space in the reserved FCC area of DPRAM for the
+ * internal buffers. No one uses this space (yet), so we
+ * can do this. Later, we will add resource management for
+ * this area.
+ */
+
+ mem_addr = (u32) fep->fcc.mem; /* de-fixup dpram offset */
+
+ W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff));
+ W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff));
+ W16(ep, fen_padptr, mem_addr + 64);
+
+ /* fill with special symbol... */
+ memset(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32);
+
+ W32(ep, fen_genfcc.fcc_rbptr, 0);
+ W32(ep, fen_genfcc.fcc_tbptr, 0);
+ W32(ep, fen_genfcc.fcc_rcrc, 0);
+ W32(ep, fen_genfcc.fcc_tcrc, 0);
+ W16(ep, fen_genfcc.fcc_res1, 0);
+ W32(ep, fen_genfcc.fcc_res2, 0);
+
+ /* no CAM */
+ W32(ep, fen_camptr, 0);
+
+ /* Set CRC preset and mask */
+ W32(ep, fen_cmask, 0xdebb20e3);
+ W32(ep, fen_cpres, 0xffffffff);
+
+ W32(ep, fen_crcec, 0); /* CRC Error counter */
+ W32(ep, fen_alec, 0); /* alignment error counter */
+ W32(ep, fen_disfc, 0); /* discard frame counter */
+ W16(ep, fen_retlim, 15); /* Retry limit threshold */
+ W16(ep, fen_pper, 0); /* Normal persistence */
+
+ /* set group address */
+ W32(ep, fen_gaddrh, fep->fcc.gaddrh);
+ W32(ep, fen_gaddrl, fep->fcc.gaddrh);
+
+ /* Clear hash filter tables */
+ W32(ep, fen_iaddrh, 0);
+ W32(ep, fen_iaddrl, 0);
+
+ /* Clear the Out-of-sequence TxBD */
+ W16(ep, fen_tfcstat, 0);
+ W16(ep, fen_tfclen, 0);
+ W32(ep, fen_tfcptr, 0);
+
+ W16(ep, fen_mflr, PKT_MAXBUF_SIZE); /* maximum frame length register */
+ W16(ep, fen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */
+
+ /* set address */
+ mac = dev->dev_addr;
+ paddrh = ((u16)mac[5] << 8) | mac[4];
+ paddrm = ((u16)mac[3] << 8) | mac[2];
+ paddrl = ((u16)mac[1] << 8) | mac[0];
+
+ W16(ep, fen_paddrh, paddrh);
+ W16(ep, fen_paddrm, paddrm);
+ W16(ep, fen_paddrl, paddrl);
+
+ W16(ep, fen_taddrh, 0);
+ W16(ep, fen_taddrm, 0);
+ W16(ep, fen_taddrl, 0);
+
+ W16(ep, fen_maxd1, 1520); /* maximum DMA1 length */
+ W16(ep, fen_maxd2, 1520); /* maximum DMA2 length */
+
+ /* Clear stat counters, in case we ever enable RMON */
+ W32(ep, fen_octc, 0);
+ W32(ep, fen_colc, 0);
+ W32(ep, fen_broc, 0);
+ W32(ep, fen_mulc, 0);
+ W32(ep, fen_uspc, 0);
+ W32(ep, fen_frgc, 0);
+ W32(ep, fen_ospc, 0);
+ W32(ep, fen_jbrc, 0);
+ W32(ep, fen_p64c, 0);
+ W32(ep, fen_p65c, 0);
+ W32(ep, fen_p128c, 0);
+ W32(ep, fen_p256c, 0);
+ W32(ep, fen_p512c, 0);
+ W32(ep, fen_p1024c, 0);
+
+ W16(ep, fen_rfthr, 0); /* Suggested by manual */
+ W16(ep, fen_rfcnt, 0);
+ W16(ep, fen_cftype, 0);
+
+ fs_init_bds(dev);
+
+ /* adjust to speed (for RMII mode) */
+ if (fpi->use_rmii) {
+ if (fep->speed == 100)
+ C8(fcccp, fcc_gfemr, 0x20);
+ else
+ S8(fcccp, fcc_gfemr, 0x20);
+ }
+
+ fcc_cr_cmd(fep, 0x0c, CPM_CR_INIT_TRX);
+
+ /* clear events */
+ W16(fccp, fcc_fcce, 0xffff);
+
+ /* Enable interrupts we wish to service */
+ W16(fccp, fcc_fccm, FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
+
+ /* Set GFMR to enable Ethernet operating mode */
+ W32(fccp, fcc_gfmr, FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
+
+ /* set sync/delimiters */
+ W16(fccp, fcc_fdsr, 0xd555);
+
+ W32(fccp, fcc_fpsmr, FCC_PSMR_ENCRC);
+
+ if (fpi->use_rmii)
+ S32(fccp, fcc_fpsmr, FCC_PSMR_RMII);
+
+ /* adjust to duplex mode */
+ if (fep->duplex)
+ S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+ else
+ C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB);
+
+ S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ /* stop ethernet */
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT);
+
+ /* clear events */
+ W16(fccp, fcc_fcce, 0xffff);
+
+ /* clear interrupt mask */
+ W16(fccp, fcc_fccm, 0);
+
+ fs_cleanup_bds(dev);
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ W16(fccp, fcc_fcce, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ S16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ C16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ return (u32)R16(fccp, fcc_fcce);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ W16(fccp, fcc_fcce, int_events & 0xffff);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FS_ENET ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->fcc.fccp, sizeof(fcc_t));
+ p = (char *)p + sizeof(fcc_t);
+
+ memcpy_fromio(p, fep->fcc.fcccp, sizeof(fcc_c_t));
+ p = (char *)p + sizeof(fcc_c_t);
+
+ memcpy_fromio(p, fep->fcc.ep, sizeof(fcc_enet_t));
+
+ return 0;
+}
+
+int get_regs_len(struct net_device *dev)
+{
+ return sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t);
+}
+
+/* Some transmit errors cause the transmitter to shut
+ * down. We now issue a restart transmit. Since the
+ * errors close the BD and update the pointers, the restart
+ * _should_ pick up without having to reset any of our
+ * pointers either. Also, To workaround 8260 device erratum
+ * CPM37, we must disable and then re-enable the transmitter
+ * following a Late Collision, Underrun, or Retry Limit error.
+ */
+void tx_restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fcc_t *fccp = fep->fcc.fccp;
+
+ C32(fccp, fcc_gfmr, FCC_GFMR_ENT);
+ udelay(10);
+ S32(fccp, fcc_gfmr, FCC_GFMR_ENT);
+
+ fcc_cr_cmd(fep, 0x0C, CPM_CR_RESTART_TX);
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_fcc_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c
new file mode 100644
index 0000000..5ef4e84
--- /dev/null
+++ b/drivers/net/fs_enet/mac-fec.c
@@ -0,0 +1,653 @@
+/*
+ * Freescale Ethernet controllers
+ *
+ * Copyright (c) 2005 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#endif
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+#if defined(CONFIG_CPM1)
+/* for a CPM1 __raw_xxx's are sufficient */
+#define __fs_out32(addr, x) __raw_writel(x, addr)
+#define __fs_out16(addr, x) __raw_writew(x, addr)
+#define __fs_in32(addr) __raw_readl(addr)
+#define __fs_in16(addr) __raw_readw(addr)
+#else
+/* for others play it safe */
+#define __fs_out32(addr, x) out_be32(addr, x)
+#define __fs_out16(addr, x) out_be16(addr, x)
+#define __fs_in32(addr) in_be32(addr)
+#define __fs_in16(addr) in_be16(addr)
+#endif
+
+/* write */
+#define FW(_fecp, _reg, _v) __fs_out32(&(_fecp)->fec_ ## _reg, (_v))
+
+/* read */
+#define FR(_fecp, _reg) __fs_in32(&(_fecp)->fec_ ## _reg)
+
+/* set bits */
+#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v))
+
+/* clear bits */
+#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v))
+
+
+/* CRC polynomium used by the FEC for the multicast group filtering */
+#define FEC_CRC_POLY 0x04C11DB7
+
+#define FEC_MAX_MULTICAST_ADDRS 64
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */
+#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */
+#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */
+#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */
+#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */
+#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */
+#define FEC_ENET_RXF 0x02000000U /* Full frame received */
+#define FEC_ENET_RXB 0x01000000U /* A buffer was received */
+#define FEC_ENET_MII 0x00800000U /* MII interrupt */
+#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */
+
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+
+/* Make MII read/write commands for the FEC.
+*/
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
+#define mk_mii_end 0
+
+#define FEC_MII_LOOPS 10000
+
+/*
+ * Delay to wait for FEC reset command to complete (in us)
+ */
+#define FEC_RESET_DELAY 50
+
+static int whack_reset(fec_t * fecp)
+{
+ int i;
+
+ FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
+ for (i = 0; i < FEC_RESET_DELAY; i++) {
+ if ((FR(fecp, ecntrl) & FEC_ECNTRL_RESET) == 0)
+ return 0; /* OK */
+ udelay(1);
+ }
+
+ return -1;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq_byname(pdev,"interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ fep->fec.fecp =(void*)r->start;
+
+ if(fep->fec.fecp == NULL)
+ return -EINVAL;
+
+ return 0;
+
+}
+
+#define FEC_NAPI_RX_EVENT_MSK (FEC_ENET_RXF | FEC_ENET_RXB)
+#define FEC_RX_EVENT (FEC_ENET_RXF)
+#define FEC_TX_EVENT (FEC_ENET_TXF)
+#define FEC_ERR_EVENT_MSK (FEC_ENET_HBERR | FEC_ENET_BABR | \
+ FEC_ENET_BABT | FEC_ENET_EBERR)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (do_pd_setup(fep) != 0)
+ return -EINVAL;
+
+ fep->fec.hthi = 0;
+ fep->fec.htlo = 0;
+
+ fep->ev_napi_rx = FEC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = FEC_RX_EVENT;
+ fep->ev_tx = FEC_TX_EVENT;
+ fep->ev_err = FEC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_base = dma_alloc_coherent(fep->dev,
+ (fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), &fep->ring_mem_addr,
+ GFP_KERNEL);
+ if (fep->ring_base == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ if(fep->ring_base)
+ dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring)
+ * sizeof(cbd_t),
+ fep->ring_base,
+ fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FS(fecp, r_cntrl, FEC_RCNTRL_PROM);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ fep->fec.hthi = 0;
+ fep->fec.htlo = 0;
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 *mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ int temp, hash_index, i, j;
+ u32 crc, csrVal;
+ u8 byte, msb;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ byte = mac[i];
+ for (j = 0; j < 8; j++) {
+ msb = crc >> 31;
+ crc <<= 1;
+ if (msb ^ (byte & 0x1))
+ crc ^= FEC_CRC_POLY;
+ byte >>= 1;
+ }
+ }
+
+ temp = (crc & 0x3f) >> 1;
+ hash_index = ((temp & 0x01) << 4) |
+ ((temp & 0x02) << 2) |
+ ((temp & 0x04)) |
+ ((temp & 0x08) >> 2) |
+ ((temp & 0x10) >> 4);
+ csrVal = 1 << hash_index;
+ if (crc & 1)
+ fep->fec.hthi |= csrVal;
+ else
+ fep->fec.htlo |= csrVal;
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > FEC_MAX_MULTICAST_ADDRS) {
+ fep->fec.hthi = 0xffffffffU;
+ fep->fec.htlo = 0xffffffffU;
+ }
+
+ FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
+ FW(fecp, hash_table_high, fep->fec.hthi);
+ FW(fecp, hash_table_low, fep->fec.htlo);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+static void restart(struct net_device *dev)
+{
+#ifdef CONFIG_DUET
+ immap_t *immap = fs_enet_immap;
+ u32 cptr;
+#endif
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+ const struct fs_platform_info *fpi = fep->fpi;
+ dma_addr_t rx_bd_base_phys, tx_bd_base_phys;
+ int r;
+ u32 addrhi, addrlo;
+
+ r = whack_reset(fep->fec.fecp);
+ if (r != 0)
+ printk(KERN_ERR DRV_MODULE_NAME
+ ": %s FEC Reset FAILED!\n", dev->name);
+
+ /*
+ * Set station address.
+ */
+ addrhi = ((u32) dev->dev_addr[0] << 24) |
+ ((u32) dev->dev_addr[1] << 16) |
+ ((u32) dev->dev_addr[2] << 8) |
+ (u32) dev->dev_addr[3];
+ addrlo = ((u32) dev->dev_addr[4] << 24) |
+ ((u32) dev->dev_addr[5] << 16);
+ FW(fecp, addr_low, addrhi);
+ FW(fecp, addr_high, addrlo);
+
+ /*
+ * Reset all multicast.
+ */
+ FW(fecp, hash_table_high, fep->fec.hthi);
+ FW(fecp, hash_table_low, fep->fec.htlo);
+
+ /*
+ * Set maximum receive buffer size.
+ */
+ FW(fecp, r_buff_size, PKT_MAXBLR_SIZE);
+ FW(fecp, r_hash, PKT_MAXBUF_SIZE);
+
+ /* get physical address */
+ rx_bd_base_phys = fep->ring_mem_addr;
+ tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring;
+
+ /*
+ * Set receive and transmit descriptor base.
+ */
+ FW(fecp, r_des_start, rx_bd_base_phys);
+ FW(fecp, x_des_start, tx_bd_base_phys);
+
+ fs_init_bds(dev);
+
+ /*
+ * Enable big endian and don't care about SDMA FC.
+ */
+ FW(fecp, fun_code, 0x78000000);
+
+ /*
+ * Set MII speed.
+ */
+ FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed);
+
+ /*
+ * Clear any outstanding interrupt.
+ */
+ FW(fecp, ievent, 0xffc0);
+ FW(fecp, ivec, (fep->interrupt / 2) << 29);
+
+
+ /*
+ * adjust to speed (only for DUET & RMII)
+ */
+#ifdef CONFIG_DUET
+ if (fpi->use_rmii) {
+ cptr = in_be32(&immap->im_cpm.cp_cptr);
+ switch (fs_get_fec_index(fpi->fs_no)) {
+ case 0:
+ cptr |= 0x100;
+ if (fep->speed == 10)
+ cptr |= 0x0000010;
+ else if (fep->speed == 100)
+ cptr &= ~0x0000010;
+ break;
+ case 1:
+ cptr |= 0x80;
+ if (fep->speed == 10)
+ cptr |= 0x0000008;
+ else if (fep->speed == 100)
+ cptr &= ~0x0000008;
+ break;
+ default:
+ BUG(); /* should never happen */
+ break;
+ }
+ out_be32(&immap->im_cpm.cp_cptr, cptr);
+ }
+#endif
+
+ FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ /*
+ * adjust to duplex mode
+ */
+ if (fep->duplex) {
+ FC(fecp, r_cntrl, FEC_RCNTRL_DRT);
+ FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
+ } else {
+ FS(fecp, r_cntrl, FEC_RCNTRL_DRT);
+ FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
+ }
+
+ /*
+ * Enable interrupts we wish to service.
+ */
+ FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB);
+
+ /*
+ * And last, enable the transmit and receive processing.
+ */
+ FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, r_des_active, 0x01000000);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+ struct fs_enet_mii_bus *bus = fep->mii_bus;
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int i;
+
+ if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0)
+ return; /* already down */
+
+ FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */
+ for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) &&
+ i < FEC_RESET_DELAY; i++)
+ udelay(1);
+
+ if (i == FEC_RESET_DELAY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FEC timeout on graceful transmit stop\n",
+ dev->name);
+ /*
+ * Disable FEC. Let only MII interrupts.
+ */
+ FW(fecp, imask, 0);
+ FC(fecp, ecntrl, FEC_ECNTRL_ETHER_EN);
+
+ fs_cleanup_bds(dev);
+
+ /* shut down FEC1? that's where the mii bus is */
+ if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) {
+ FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, ievent, FEC_ENET_MII);
+ FW(fecp, mii_speed, bus->fec.mii_speed);
+ }
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ immap_t *immap = fs_enet_immap;
+ u32 siel;
+
+ /* SIU interrupt */
+ if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
+
+ siel = in_be32(&immap->im_siu_conf.sc_siel);
+ if ((irq & 1) == 0)
+ siel |= (0x80000000 >> irq);
+ else
+ siel &= ~(0x80000000 >> (irq & ~1));
+ out_be32(&immap->im_siu_conf.sc_siel, siel);
+ }
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, ievent, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FS(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FC(fecp, imask, FEC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, r_des_active, 0x01000000);
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, x_des_active, 0x01000000);
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ return FR(fecp, ievent) & FR(fecp, imask);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ fec_t *fecp = fep->fec.fecp;
+
+ FW(fecp, ievent, int_events);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s FEC ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(fec_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->fec.fecp, sizeof(fec_t));
+
+ return 0;
+}
+
+int get_regs_len(struct net_device *dev)
+{
+ return sizeof(fec_t);
+}
+
+void tx_restart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_fec_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
+
+/***********************************************************************/
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ fec_t *fecp = bus->fec.fecp;
+ int i, ret = -1;
+
+ if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
+ BUG();
+
+ /* Add PHY address to register command. */
+ FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location));
+
+ for (i = 0; i < FEC_MII_LOOPS; i++)
+ if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
+ break;
+
+ if (i < FEC_MII_LOOPS) {
+ FW(fecp, ievent, FEC_ENET_MII);
+ ret = FR(fecp, mii_data) & 0xffff;
+ }
+
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value)
+{
+ fec_t *fecp = bus->fec.fecp;
+ int i;
+
+ /* this must never happen */
+ if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0)
+ BUG();
+
+ /* Add PHY address to register command. */
+ FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value));
+
+ for (i = 0; i < FEC_MII_LOOPS; i++)
+ if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
+ break;
+
+ if (i < FEC_MII_LOOPS)
+ FW(fecp, ievent, FEC_ENET_MII);
+}
+
+int fs_mii_fec_init(struct fs_enet_mii_bus *bus)
+{
+ bd_t *bd = (bd_t *)__res;
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ fec_t *fecp;
+
+ if (bi->id != 0)
+ return -1;
+
+ bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec;
+ bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2)
+ & 0x3F) << 1;
+
+ fecp = bus->fec.fecp;
+
+ FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
+ FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
+ FW(fecp, ievent, FEC_ENET_MII);
+ FW(fecp, mii_speed, bus->fec.mii_speed);
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
new file mode 100644
index 0000000..d8c6e9c
--- /dev/null
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -0,0 +1,524 @@
+/*
+ * Ethernet on Serial Communications Controller (SCC) driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+#endif
+
+#include "fs_enet.h"
+
+/*************************************************/
+
+#if defined(CONFIG_CPM1)
+/* for a 8xx __raw_xxx's are sufficient */
+#define __fs_out32(addr, x) __raw_writel(x, addr)
+#define __fs_out16(addr, x) __raw_writew(x, addr)
+#define __fs_out8(addr, x) __raw_writeb(x, addr)
+#define __fs_in32(addr) __raw_readl(addr)
+#define __fs_in16(addr) __raw_readw(addr)
+#define __fs_in8(addr) __raw_readb(addr)
+#else
+/* for others play it safe */
+#define __fs_out32(addr, x) out_be32(addr, x)
+#define __fs_out16(addr, x) out_be16(addr, x)
+#define __fs_in32(addr) in_be32(addr)
+#define __fs_in16(addr) in_be16(addr)
+#endif
+
+/* write, read, set bits, clear bits */
+#define W32(_p, _m, _v) __fs_out32(&(_p)->_m, (_v))
+#define R32(_p, _m) __fs_in32(&(_p)->_m)
+#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v))
+#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v))
+
+#define W16(_p, _m, _v) __fs_out16(&(_p)->_m, (_v))
+#define R16(_p, _m) __fs_in16(&(_p)->_m)
+#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v))
+#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v))
+
+#define W8(_p, _m, _v) __fs_out8(&(_p)->_m, (_v))
+#define R8(_p, _m) __fs_in8(&(_p)->_m)
+#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v))
+#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v))
+
+#define SCC_MAX_MULTICAST_ADDRS 64
+
+/*
+ * Delay to wait for SCC reset command to complete (in us)
+ */
+#define SCC_RESET_DELAY 50
+#define MAX_CR_CMD_LOOPS 10000
+
+static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op)
+{
+ cpm8xx_t *cpmp = &((immap_t *)fs_enet_immap)->im_cpm;
+ u32 v, ch;
+ int i = 0;
+
+ ch = fep->scc.idx << 2;
+ v = mk_cr_cmd(ch, op);
+ W16(cpmp, cp_cpcr, v | CPM_CR_FLG);
+ for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+ if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
+ break;
+
+ if (i >= MAX_CR_CMD_LOOPS) {
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n",
+ __FUNCTION__);
+ return 1;
+ }
+ return 0;
+}
+
+static int do_pd_setup(struct fs_enet_private *fep)
+{
+ struct platform_device *pdev = to_platform_device(fep->dev);
+ struct resource *r;
+
+ /* Fill out IRQ field */
+ fep->interrupt = platform_get_irq_byname(pdev, "interrupt");
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+ fep->scc.sccp = (void *)r->start;
+
+ if (fep->scc.sccp == NULL)
+ return -EINVAL;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram");
+ fep->scc.ep = (void *)r->start;
+
+ if (fep->scc.ep == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define SCC_NAPI_RX_EVENT_MSK (SCCE_ENET_RXF | SCCE_ENET_RXB)
+#define SCC_RX_EVENT (SCCE_ENET_RXF)
+#define SCC_TX_EVENT (SCCE_ENET_TXB)
+#define SCC_ERR_EVENT_MSK (SCCE_ENET_TXE | SCCE_ENET_BSY)
+
+static int setup_data(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->scc.idx = fs_get_scc_index(fpi->fs_no);
+ if ((unsigned int)fep->fcc.idx > 4) /* max 4 SCCs */
+ return -EINVAL;
+
+ do_pd_setup(fep);
+
+ fep->scc.hthi = 0;
+ fep->scc.htlo = 0;
+
+ fep->ev_napi_rx = SCC_NAPI_RX_EVENT_MSK;
+ fep->ev_rx = SCC_RX_EVENT;
+ fep->ev_tx = SCC_TX_EVENT;
+ fep->ev_err = SCC_ERR_EVENT_MSK;
+
+ return 0;
+}
+
+static int allocate_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ const struct fs_platform_info *fpi = fep->fpi;
+
+ fep->ring_mem_addr = cpm_dpalloc((fpi->tx_ring + fpi->rx_ring) *
+ sizeof(cbd_t), 8);
+ if (IS_DPERR(fep->ring_mem_addr))
+ return -ENOMEM;
+
+ fep->ring_base = cpm_dpram_addr(fep->ring_mem_addr);
+
+ return 0;
+}
+
+static void free_bd(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (fep->ring_base)
+ cpm_dpfree(fep->ring_mem_addr);
+}
+
+static void cleanup_data(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void set_promiscuous_mode(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ S16(sccp, scc_psmr, SCC_PSMR_PRO);
+}
+
+static void set_multicast_start(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_enet_t *ep = fep->scc.ep;
+
+ W16(ep, sen_gaddr1, 0);
+ W16(ep, sen_gaddr2, 0);
+ W16(ep, sen_gaddr3, 0);
+ W16(ep, sen_gaddr4, 0);
+}
+
+static void set_multicast_one(struct net_device *dev, const u8 * mac)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_enet_t *ep = fep->scc.ep;
+ u16 taddrh, taddrm, taddrl;
+
+ taddrh = ((u16) mac[5] << 8) | mac[4];
+ taddrm = ((u16) mac[3] << 8) | mac[2];
+ taddrl = ((u16) mac[1] << 8) | mac[0];
+
+ W16(ep, sen_taddrh, taddrh);
+ W16(ep, sen_taddrm, taddrm);
+ W16(ep, sen_taddrl, taddrl);
+ scc_cr_cmd(fep, CPM_CR_SET_GADDR);
+}
+
+static void set_multicast_finish(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ scc_enet_t *ep = fep->scc.ep;
+
+ /* clear promiscuous always */
+ C16(sccp, scc_psmr, SCC_PSMR_PRO);
+
+ /* if all multi or too many multicasts; just enable all */
+ if ((dev->flags & IFF_ALLMULTI) != 0 ||
+ dev->mc_count > SCC_MAX_MULTICAST_ADDRS) {
+
+ W16(ep, sen_gaddr1, 0xffff);
+ W16(ep, sen_gaddr2, 0xffff);
+ W16(ep, sen_gaddr3, 0xffff);
+ W16(ep, sen_gaddr4, 0xffff);
+ }
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct dev_mc_list *pmc;
+
+ if ((dev->flags & IFF_PROMISC) == 0) {
+ set_multicast_start(dev);
+ for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next)
+ set_multicast_one(dev, pmc->dmi_addr);
+ set_multicast_finish(dev);
+ } else
+ set_promiscuous_mode(dev);
+}
+
+/*
+ * This function is called to start or restart the FEC during a link
+ * change. This only happens when switching between half and full
+ * duplex.
+ */
+static void restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ scc_enet_t *ep = fep->scc.ep;
+ const struct fs_platform_info *fpi = fep->fpi;
+ u16 paddrh, paddrm, paddrl;
+ const unsigned char *mac;
+ int i;
+
+ C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* clear everything (slow & steady does it) */
+ for (i = 0; i < sizeof(*ep); i++)
+ __fs_out8((char *)ep + i, 0);
+
+ /* point to bds */
+ W16(ep, sen_genscc.scc_rbase, fep->ring_mem_addr);
+ W16(ep, sen_genscc.scc_tbase,
+ fep->ring_mem_addr + sizeof(cbd_t) * fpi->rx_ring);
+
+ /* Initialize function code registers for big-endian.
+ */
+ W8(ep, sen_genscc.scc_rfcr, SCC_EB);
+ W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+
+ /* Set maximum bytes per receive buffer.
+ * This appears to be an Ethernet frame size, not the buffer
+ * fragment size. It must be a multiple of four.
+ */
+ W16(ep, sen_genscc.scc_mrblr, 0x5f0);
+
+ /* Set CRC preset and mask.
+ */
+ W32(ep, sen_cpres, 0xffffffff);
+ W32(ep, sen_cmask, 0xdebb20e3);
+
+ W32(ep, sen_crcec, 0); /* CRC Error counter */
+ W32(ep, sen_alec, 0); /* alignment error counter */
+ W32(ep, sen_disfc, 0); /* discard frame counter */
+
+ W16(ep, sen_pads, 0x8888); /* Tx short frame pad character */
+ W16(ep, sen_retlim, 15); /* Retry limit threshold */
+
+ W16(ep, sen_maxflr, 0x5ee); /* maximum frame length register */
+
+ W16(ep, sen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */
+
+ W16(ep, sen_maxd1, 0x000005f0); /* maximum DMA1 length */
+ W16(ep, sen_maxd2, 0x000005f0); /* maximum DMA2 length */
+
+ /* Clear hash tables.
+ */
+ W16(ep, sen_gaddr1, 0);
+ W16(ep, sen_gaddr2, 0);
+ W16(ep, sen_gaddr3, 0);
+ W16(ep, sen_gaddr4, 0);
+ W16(ep, sen_iaddr1, 0);
+ W16(ep, sen_iaddr2, 0);
+ W16(ep, sen_iaddr3, 0);
+ W16(ep, sen_iaddr4, 0);
+
+ /* set address
+ */
+ mac = dev->dev_addr;
+ paddrh = ((u16) mac[5] << 8) | mac[4];
+ paddrm = ((u16) mac[3] << 8) | mac[2];
+ paddrl = ((u16) mac[1] << 8) | mac[0];
+
+ W16(ep, sen_paddrh, paddrh);
+ W16(ep, sen_paddrm, paddrm);
+ W16(ep, sen_paddrl, paddrl);
+
+ W16(ep, sen_pper, 0);
+ W16(ep, sen_taddrl, 0);
+ W16(ep, sen_taddrm, 0);
+ W16(ep, sen_taddrh, 0);
+
+ fs_init_bds(dev);
+
+ scc_cr_cmd(fep, CPM_CR_INIT_TRX);
+
+ W16(sccp, scc_scce, 0xffff);
+
+ /* Enable interrupts we wish to service.
+ */
+ W16(sccp, scc_sccm, SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
+
+ /* Set GSMR_H to enable all normal operating modes.
+ * Set GSMR_L to enable Ethernet to MC68160.
+ */
+ W32(sccp, scc_gsmrh, 0);
+ W32(sccp, scc_gsmrl,
+ SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_MODE_ENET);
+
+ /* Set sync/delimiters.
+ */
+ W16(sccp, scc_dsr, 0xd555);
+
+ /* Set processing mode. Use Ethernet CRC, catch broadcast, and
+ * start frame search 22 bit times after RENA.
+ */
+ W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
+
+ /* Set full duplex mode if needed */
+ if (fep->duplex)
+ S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);
+
+ S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void stop(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+ int i;
+
+ for (i = 0; (R16(sccp, scc_sccm) == 0) && i < SCC_RESET_DELAY; i++)
+ udelay(1);
+
+ if (i == SCC_RESET_DELAY)
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s SCC timeout on graceful transmit stop\n",
+ dev->name);
+
+ W16(sccp, scc_sccm, 0);
+ C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ fs_cleanup_bds(dev);
+}
+
+static void pre_request_irq(struct net_device *dev, int irq)
+{
+ immap_t *immap = fs_enet_immap;
+ u32 siel;
+
+ /* SIU interrupt */
+ if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) {
+
+ siel = in_be32(&immap->im_siu_conf.sc_siel);
+ if ((irq & 1) == 0)
+ siel |= (0x80000000 >> irq);
+ else
+ siel &= ~(0x80000000 >> (irq & ~1));
+ out_be32(&immap->im_siu_conf.sc_siel, siel);
+ }
+}
+
+static void post_free_irq(struct net_device *dev, int irq)
+{
+ /* nothing */
+}
+
+static void napi_clear_rx_event(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ W16(sccp, scc_scce, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_enable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ S16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void napi_disable_rx(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ C16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK);
+}
+
+static void rx_bd_done(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static void tx_kickstart(struct net_device *dev)
+{
+ /* nothing */
+}
+
+static u32 get_int_events(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ return (u32) R16(sccp, scc_scce);
+}
+
+static void clear_int_events(struct net_device *dev, u32 int_events)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+ scc_t *sccp = fep->scc.sccp;
+
+ W16(sccp, scc_scce, int_events & 0xffff);
+}
+
+static void ev_error(struct net_device *dev, u32 int_events)
+{
+ printk(KERN_WARNING DRV_MODULE_NAME
+ ": %s SCC ERROR(s) 0x%x\n", dev->name, int_events);
+}
+
+static int get_regs(struct net_device *dev, void *p, int *sizep)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ if (*sizep < sizeof(scc_t) + sizeof(scc_enet_t))
+ return -EINVAL;
+
+ memcpy_fromio(p, fep->scc.sccp, sizeof(scc_t));
+ p = (char *)p + sizeof(scc_t);
+
+ memcpy_fromio(p, fep->scc.ep, sizeof(scc_enet_t));
+
+ return 0;
+}
+
+static int get_regs_len(struct net_device *dev)
+{
+ return sizeof(scc_t) + sizeof(scc_enet_t);
+}
+
+static void tx_restart(struct net_device *dev)
+{
+ struct fs_enet_private *fep = netdev_priv(dev);
+
+ scc_cr_cmd(fep, CPM_CR_RESTART_TX);
+}
+
+/*************************************************************************/
+
+const struct fs_ops fs_scc_ops = {
+ .setup_data = setup_data,
+ .cleanup_data = cleanup_data,
+ .set_multicast_list = set_multicast_list,
+ .restart = restart,
+ .stop = stop,
+ .pre_request_irq = pre_request_irq,
+ .post_free_irq = post_free_irq,
+ .napi_clear_rx_event = napi_clear_rx_event,
+ .napi_enable_rx = napi_enable_rx,
+ .napi_disable_rx = napi_disable_rx,
+ .rx_bd_done = rx_bd_done,
+ .tx_kickstart = tx_kickstart,
+ .get_int_events = get_int_events,
+ .clear_int_events = clear_int_events,
+ .ev_error = ev_error,
+ .get_regs = get_regs,
+ .get_regs_len = get_regs_len,
+ .tx_restart = tx_restart,
+ .allocate_bd = allocate_bd,
+ .free_bd = free_bd,
+};
diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c
new file mode 100644
index 0000000..24a5e2e
--- /dev/null
+++ b/drivers/net/fs_enet/mii-bitbang.c
@@ -0,0 +1,405 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+#ifdef CONFIG_8xx
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ immap_t *im = (immap_t *)fs_enet_immap;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &im->im_ioport.iop_padir;
+ dat = &im->im_ioport.iop_padat;
+ ppar = &im->im_ioport.iop_papar;
+ break;
+
+ case fsiop_portb:
+ dir = &im->im_cpm.cp_pbdir;
+ dat = &im->im_cpm.cp_pbdat;
+ ppar = &im->im_cpm.cp_pbpar;
+ break;
+
+ case fsiop_portc:
+ dir = &im->im_ioport.iop_pcdir;
+ dat = &im->im_ioport.iop_pcdat;
+ ppar = &im->im_ioport.iop_pcpar;
+ break;
+
+ case fsiop_portd:
+ dir = &im->im_ioport.iop_pddir;
+ dat = &im->im_ioport.iop_pddat;
+ ppar = &im->im_ioport.iop_pdpar;
+ break;
+
+ case fsiop_porte:
+ dir = &im->im_cpm.cp_pedir;
+ dat = &im->im_cpm.cp_pedat;
+ ppar = &im->im_cpm.cp_pepar;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_8260
+static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
+{
+ iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
+ void *dir, *dat, *ppar;
+ int adv;
+ u8 msk;
+
+ switch (port) {
+ case fsiop_porta:
+ dir = &io->iop_pdira;
+ dat = &io->iop_pdata;
+ ppar = &io->iop_ppara;
+ break;
+
+ case fsiop_portb:
+ dir = &io->iop_pdirb;
+ dat = &io->iop_pdatb;
+ ppar = &io->iop_pparb;
+ break;
+
+ case fsiop_portc:
+ dir = &io->iop_pdirc;
+ dat = &io->iop_pdatc;
+ ppar = &io->iop_pparc;
+ break;
+
+ case fsiop_portd:
+ dir = &io->iop_pdird;
+ dat = &io->iop_pdatd;
+ ppar = &io->iop_ppard;
+ break;
+
+ default:
+ printk(KERN_ERR DRV_MODULE_NAME
+ "Illegal port value %d!\n", port);
+ return -EINVAL;
+ }
+
+ adv = bit >> 3;
+ dir = (char *)dir + adv;
+ dat = (char *)dat + adv;
+ ppar = (char *)ppar + adv;
+
+ msk = 1 << (7 - (bit & 7));
+ if ((in_8(ppar) & msk) != 0) {
+ printk(KERN_ERR DRV_MODULE_NAME
+ "pin %d on port %d is not general purpose!\n", bit, port);
+ return -EINVAL;
+ }
+
+ *dirp = dir;
+ *datp = dat;
+ *mskp = msk;
+
+ return 0;
+}
+#endif
+
+static inline void bb_set(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) | m);
+}
+
+static inline void bb_clr(u8 *p, u8 m)
+{
+ out_8(p, in_8(p) & ~m);
+}
+
+static inline int bb_read(u8 *p, u8 m)
+{
+ return (in_8(p) & m) != 0;
+}
+
+static inline void mdio_active(struct fs_enet_mii_bus *bus)
+{
+ bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
+{
+ bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
+}
+
+static inline int mdio_read(struct fs_enet_mii_bus *bus)
+{
+ return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdio(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+ else
+ bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
+}
+
+static inline void mdc(struct fs_enet_mii_bus *bus, int what)
+{
+ if (what)
+ bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+ else
+ bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
+}
+
+static inline void mii_delay(struct fs_enet_mii_bus *bus)
+{
+ udelay(bus->bus_info->i.bitbang.delay);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
+{
+ int j;
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+ * The IEEE spec says this is a PHY optional requirement. The AMD
+ * 79C874 requires one after power up and one after a MII communications
+ * error. This means that we are doing more preambles than we need,
+ * but it is safer and will be much more robust.
+ */
+
+ mdio_active(bus);
+ mdio(bus, 1);
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, !read);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* send the PHY address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (addr & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for (j = 0; j < 5; j++) {
+ mdc(bus, 0);
+ mdio(bus, (reg & 0x10) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ reg <<= 1;
+ }
+}
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ u16 rdreg;
+ int ret, j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+
+ bitbang_pre(bus, 1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ mdc(bus, 0);
+ mdio_tristate(bus);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if (mdio_read(bus) != 0) {
+ /* PHY didn't drive TA low */
+ for (j = 0; j < 32; j++) {
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ }
+ ret = -1;
+ goto out;
+ }
+
+ mdc(bus, 0);
+ mii_delay(bus);
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 1);
+ mii_delay(bus);
+ rdreg <<= 1;
+ rdreg |= mdio_read(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ }
+
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ ret = rdreg;
+out:
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ int j;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+ u16 value = val & 0xffff;
+
+ bitbang_pre(bus, 0, addr, reg);
+
+ /* send the turnaround (10) */
+ mdc(bus, 0);
+ mdio(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ mdc(bus, 0);
+ mdio(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+
+ /* write 16 bits of register data, MSB first */
+ for (j = 0; j < 16; j++) {
+ mdc(bus, 0);
+ mdio(bus, (value & 0x8000) != 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ mdio_tristate(bus);
+ mdc(bus, 0);
+ mii_delay(bus);
+ mdc(bus, 1);
+ mii_delay(bus);
+}
+
+int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+ int r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
+ &bus->bitbang.mdio_dat,
+ &bus->bitbang.mdio_msk,
+ bi->i.bitbang.mdio_port,
+ bi->i.bitbang.mdio_bit);
+ if (r != 0)
+ return r;
+
+ r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
+ &bus->bitbang.mdc_dat,
+ &bus->bitbang.mdc_msk,
+ bi->i.bitbang.mdc_port,
+ bi->i.bitbang.mdc_bit);
+ if (r != 0)
+ return r;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c
new file mode 100644
index 0000000..b3e192d
--- /dev/null
+++ b/drivers/net/fs_enet/mii-fixed.c
@@ -0,0 +1,92 @@
+/*
+ * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "fs_enet.h"
+
+static const u16 mii_regs[7] = {
+ 0x3100,
+ 0x786d,
+ 0x0fff,
+ 0x0fff,
+ 0x01e1,
+ 0x45e1,
+ 0x0003,
+};
+
+static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
+{
+ int ret = 0;
+
+ if ((unsigned int)location >= ARRAY_SIZE(mii_regs))
+ return -1;
+
+ if (location != 5)
+ ret = mii_regs[location];
+ else
+ ret = bus->fixed.lpa;
+
+ return ret;
+}
+
+static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
+{
+ /* do nothing */
+}
+
+int fs_mii_fixed_init(struct fs_enet_mii_bus *bus)
+{
+ const struct fs_mii_bus_info *bi = bus->bus_info;
+
+ bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */
+
+ /* if speed is fixed at 10Mb, remove 100Mb modes */
+ if (bi->i.fixed.speed == 10)
+ bus->fixed.lpa &= ~LPA_100;
+
+ /* if duplex is half, remove full duplex modes */
+ if (bi->i.fixed.duplex == 0)
+ bus->fixed.lpa &= ~LPA_DUPLEX;
+
+ bus->mii_read = mii_read;
+ bus->mii_write = mii_write;
+
+ return 0;
+}
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 85d6dc0..3e9accf 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -390,10 +390,8 @@
"MTU change cancelled.\n",
ax->dev->name);
dev->mtu = ax->mtu;
- if (xbuff != NULL)
- kfree(xbuff);
- if (rbuff != NULL)
- kfree(rbuff);
+ kfree(xbuff);
+ kfree(rbuff);
return;
}
diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile
index 7f583a3..f98ddf0 100644
--- a/drivers/net/ibm_emac/Makefile
+++ b/drivers/net/ibm_emac/Makefile
@@ -1,12 +1,11 @@
#
-# Makefile for the IBM PPC4xx EMAC controllers
+# Makefile for the PowerPC 4xx on-chip ethernet driver
#
obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
-
-# Only need this if you want to see additional debug messages
-ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
-ibm_emac-objs += ibm_emac_debug.o
-endif
+ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
+ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
+ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 15d5a0e..28c476f 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,110 +1,142 @@
/*
- * ibm_emac.h
+ * drivers/net/ibm_emac/ibm_emac.h
*
+ * Register definitions for PowerPC 4xx on-chip ethernet contoller
*
- * Armin Kuster akuster@mvista.com
- * June, 2002
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002-2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
+#ifndef __IBM_EMAC_H_
+#define __IBM_EMAC_H_
-#ifndef _IBM_EMAC_H_
-#define _IBM_EMAC_H_
-/* General defines needed for the driver */
+#include <linux/config.h>
+#include <linux/types.h>
-/* Emac */
-typedef struct emac_regs {
- u32 em0mr0;
- u32 em0mr1;
- u32 em0tmr0;
- u32 em0tmr1;
- u32 em0rmr;
- u32 em0isr;
- u32 em0iser;
- u32 em0iahr;
- u32 em0ialr;
- u32 em0vtpid;
- u32 em0vtci;
- u32 em0ptr;
- u32 em0iaht1;
- u32 em0iaht2;
- u32 em0iaht3;
- u32 em0iaht4;
- u32 em0gaht1;
- u32 em0gaht2;
- u32 em0gaht3;
- u32 em0gaht4;
- u32 em0lsah;
- u32 em0lsal;
- u32 em0ipgvr;
- u32 em0stacr;
- u32 em0trtr;
- u32 em0rwmr;
-} emac_t;
+/* This is a simple check to prevent use of this driver on non-tested SoCs */
+#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
+ !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
+ !defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
+#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
+#endif
-/* MODE REG 0 */
-#define EMAC_M0_RXI 0x80000000
-#define EMAC_M0_TXI 0x40000000
-#define EMAC_M0_SRST 0x20000000
-#define EMAC_M0_TXE 0x10000000
-#define EMAC_M0_RXE 0x08000000
-#define EMAC_M0_WKE 0x04000000
+/* EMAC registers Write Access rules */
+struct emac_regs {
+ u32 mr0; /* special */
+ u32 mr1; /* Reset */
+ u32 tmr0; /* special */
+ u32 tmr1; /* special */
+ u32 rmr; /* Reset */
+ u32 isr; /* Always */
+ u32 iser; /* Reset */
+ u32 iahr; /* Reset, R, T */
+ u32 ialr; /* Reset, R, T */
+ u32 vtpid; /* Reset, R, T */
+ u32 vtci; /* Reset, R, T */
+ u32 ptr; /* Reset, T */
+ u32 iaht1; /* Reset, R */
+ u32 iaht2; /* Reset, R */
+ u32 iaht3; /* Reset, R */
+ u32 iaht4; /* Reset, R */
+ u32 gaht1; /* Reset, R */
+ u32 gaht2; /* Reset, R */
+ u32 gaht3; /* Reset, R */
+ u32 gaht4; /* Reset, R */
+ u32 lsah;
+ u32 lsal;
+ u32 ipgvr; /* Reset, T */
+ u32 stacr; /* special */
+ u32 trtr; /* special */
+ u32 rwmr; /* Reset */
+ u32 octx;
+ u32 ocrx;
+ u32 ipcr;
+};
-/* MODE Reg 1 */
-#define EMAC_M1_FDE 0x80000000
-#define EMAC_M1_ILE 0x40000000
-#define EMAC_M1_VLE 0x20000000
-#define EMAC_M1_EIFC 0x10000000
-#define EMAC_M1_APP 0x08000000
-#define EMAC_M1_AEMI 0x02000000
-#define EMAC_M1_IST 0x01000000
-#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */
-#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */
-#define EMAC_M1_MF_100MBPS 0x00400000
-#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */
-#define EMAC_M1_TR 0x00008000
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_RFS_8K 0x00200000
-#define EMAC_M1_RFS_4K 0x00180000
-#define EMAC_M1_RFS_2K 0x00100000
-#define EMAC_M1_RFS_1K 0x00080000
-#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_8K 0x00040000
-#define EMAC_M1_TX_FIFO_4K 0x00030000
-#define EMAC_M1_TX_FIFO_2K 0x00020000
-#define EMAC_M1_TX_FIFO_1K 0x00010000
-#define EMAC_M1_TX_TR 0x00008000
-#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */
-#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */
-#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */
-#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */
-#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */
-#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */
-#else /* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K 0x00200000
-#define EMAC_M1_RFS_1K 0x00100000
-#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_1K 0x00040000
-#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */
-#define EMAC_M1_TR1_DEPEND 0x00004000
-#define EMAC_M1_TR1_MULTI 0x00002000
-#define EMAC_M1_JUMBO_ENABLE 0x00001000
-#endif /* CONFIG_IBM_EMAC4 */
-#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \
- EMAC_M1_APP | \
- EMAC_M1_TR | EMAC_M1_VLE)
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ETHTOOL_REGS_VER 0
+#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32))
+#else
+#define EMAC_ETHTOOL_REGS_VER 1
+#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs)
+#endif
-/* Transmit Mode Register 0 */
-#define EMAC_TMR0_GNP0 0x80000000
-#define EMAC_TMR0_GNP1 0x40000000
-#define EMAC_TMR0_GNPD 0x20000000
-#define EMAC_TMR0_FC 0x10000000
+/* EMACx_MR0 */
+#define EMAC_MR0_RXI 0x80000000
+#define EMAC_MR0_TXI 0x40000000
+#define EMAC_MR0_SRST 0x20000000
+#define EMAC_MR0_TXE 0x10000000
+#define EMAC_MR0_RXE 0x08000000
+#define EMAC_MR0_WKE 0x04000000
+
+/* EMACx_MR1 */
+#define EMAC_MR1_FDE 0x80000000
+#define EMAC_MR1_ILE 0x40000000
+#define EMAC_MR1_VLE 0x20000000
+#define EMAC_MR1_EIFC 0x10000000
+#define EMAC_MR1_APP 0x08000000
+#define EMAC_MR1_IST 0x01000000
+
+#define EMAC_MR1_MF_MASK 0x00c00000
+#define EMAC_MR1_MF_10 0x00000000
+#define EMAC_MR1_MF_100 0x00400000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_MF_1000 0x00000000
+#define EMAC_MR1_MF_1000GPCS 0x00000000
+#define EMAC_MR1_MF_IPPA(id) 0x00000000
+#else
+#define EMAC_MR1_MF_1000 0x00800000
+#define EMAC_MR1_MF_1000GPCS 0x00c00000
+#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6)
+#endif
+
+#define EMAC_TX_FIFO_SIZE 2048
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_MR1_RFS_4K 0x00300000
+#define EMAC_MR1_RFS_16K 0x00000000
+#define EMAC_RX_FIFO_SIZE(gige) 4096
+#define EMAC_MR1_TFS_2K 0x00080000
+#define EMAC_MR1_TR0_MULT 0x00008000
+#define EMAC_MR1_JPSM 0x00000000
+#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
+#else
+#define EMAC_MR1_RFS_4K 0x00180000
+#define EMAC_MR1_RFS_16K 0x00280000
+#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096)
+#define EMAC_MR1_TFS_2K 0x00020000
+#define EMAC_MR1_TR 0x00008000
+#define EMAC_MR1_MWSW_001 0x00001000
+#define EMAC_MR1_JPSM 0x00000800
+#define EMAC_MR1_OBCI_MASK 0x00000038
+#define EMAC_MR1_OBCI_50 0x00000000
+#define EMAC_MR1_OBCI_66 0x00000008
+#define EMAC_MR1_OBCI_83 0x00000010
+#define EMAC_MR1_OBCI_100 0x00000018
+#define EMAC_MR1_OBCI_100P 0x00000020
+#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \
+ (freq) <= 66 ? EMAC_MR1_OBCI_66 : \
+ (freq) <= 83 ? EMAC_MR1_OBCI_83 : \
+ (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
+#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
+ EMAC_MR1_MWSW_001 | EMAC_MR1_OBCI(opb))
+#endif
+
+/* EMACx_TMR0 */
+#define EMAC_TMR0_GNP 0x80000000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR0_DEFAULT 0x00000000
+#else
#define EMAC_TMR0_TFAE_2_32 0x00000001
#define EMAC_TMR0_TFAE_4_64 0x00000002
#define EMAC_TMR0_TFAE_8_128 0x00000003
@@ -112,14 +144,36 @@
#define EMAC_TMR0_TFAE_32_512 0x00000005
#define EMAC_TMR0_TFAE_64_1024 0x00000006
#define EMAC_TMR0_TFAE_128_2048 0x00000007
+#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
+#endif
+#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
-/* Receive Mode Register */
+/* EMACx_TMR1 */
+
+/* IBM manuals are not very clear here.
+ * This is my interpretation of how things are. --ebs
+ */
+#if defined(CONFIG_40x)
+#define EMAC_FIFO_ENTRY_SIZE 8
+#define EMAC_MAL_BURST_SIZE (16 * 4)
+#else
+#define EMAC_FIFO_ENTRY_SIZE 16
+#define EMAC_MAL_BURST_SIZE (64 * 4)
+#endif
+
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16))
+#else
+#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14))
+#endif
+
+/* EMACx_RMR */
#define EMAC_RMR_SP 0x80000000
#define EMAC_RMR_SFCS 0x40000000
-#define EMAC_RMR_ARRP 0x20000000
-#define EMAC_RMR_ARP 0x10000000
-#define EMAC_RMR_AROP 0x08000000
-#define EMAC_RMR_ARPI 0x04000000
+#define EMAC_RMR_RRP 0x20000000
+#define EMAC_RMR_RFP 0x10000000
+#define EMAC_RMR_ROP 0x08000000
+#define EMAC_RMR_RPIR 0x04000000
#define EMAC_RMR_PPP 0x02000000
#define EMAC_RMR_PME 0x01000000
#define EMAC_RMR_PMME 0x00800000
@@ -127,6 +181,9 @@
#define EMAC_RMR_MIAE 0x00200000
#define EMAC_RMR_BAE 0x00100000
#define EMAC_RMR_MAE 0x00080000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RMR_BASE 0x00000000
+#else
#define EMAC_RMR_RFAF_2_32 0x00000001
#define EMAC_RMR_RFAF_4_64 0x00000002
#define EMAC_RMR_RFAF_8_128 0x00000003
@@ -134,9 +191,21 @@
#define EMAC_RMR_RFAF_32_512 0x00000005
#define EMAC_RMR_RFAF_64_1024 0x00000006
#define EMAC_RMR_RFAF_128_2048 0x00000007
-#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE)
+#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048
+#endif
-/* Interrupt Status & enable Regs */
+/* EMACx_ISR & EMACx_ISER */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_ISR_TXPE 0x00000000
+#define EMAC_ISR_RXPE 0x00000000
+#define EMAC_ISR_TXUE 0x00000000
+#define EMAC_ISR_RXOE 0x00000000
+#else
+#define EMAC_ISR_TXPE 0x20000000
+#define EMAC_ISR_RXPE 0x10000000
+#define EMAC_ISR_TXUE 0x08000000
+#define EMAC_ISR_RXOE 0x04000000
+#endif
#define EMAC_ISR_OVR 0x02000000
#define EMAC_ISR_PP 0x01000000
#define EMAC_ISR_BP 0x00800000
@@ -147,53 +216,62 @@
#define EMAC_ISR_PTLE 0x00040000
#define EMAC_ISR_ORE 0x00020000
#define EMAC_ISR_IRE 0x00010000
-#define EMAC_ISR_DBDM 0x00000200
-#define EMAC_ISR_DB0 0x00000100
-#define EMAC_ISR_SE0 0x00000080
-#define EMAC_ISR_TE0 0x00000040
-#define EMAC_ISR_DB1 0x00000020
-#define EMAC_ISR_SE1 0x00000010
-#define EMAC_ISR_TE1 0x00000008
+#define EMAC_ISR_SQE 0x00000080
+#define EMAC_ISR_TE 0x00000040
#define EMAC_ISR_MOS 0x00000002
#define EMAC_ISR_MOF 0x00000001
-/* STA CONTROL REG */
+/* EMACx_STACR */
+#define EMAC_STACR_PHYD_MASK 0xffff
+#define EMAC_STACR_PHYD_SHIFT 16
#define EMAC_STACR_OC 0x00008000
#define EMAC_STACR_PHYE 0x00004000
-#define EMAC_STACR_WRITE 0x00002000
-#define EMAC_STACR_READ 0x00001000
-#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */
-#define EMAC_STACR_CLK_66MHZ 0x00000400
-#define EMAC_STACR_CLK_100MHZ 0x00000C00
+#define EMAC_STACR_STAC_MASK 0x00003000
+#define EMAC_STACR_STAC_READ 0x00001000
+#define EMAC_STACR_STAC_WRITE 0x00002000
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_STACR_OPBC_MASK 0x00000C00
+#define EMAC_STACR_OPBC_50 0x00000000
+#define EMAC_STACR_OPBC_66 0x00000400
+#define EMAC_STACR_OPBC_83 0x00000800
+#define EMAC_STACR_OPBC_100 0x00000C00
+#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
+ (freq) <= 66 ? EMAC_STACR_OPBC_66 : \
+ (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
+#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb)
+#else
+#define EMAC_STACR_BASE(opb) 0x00000000
+#endif
+#define EMAC_STACR_PCDA_MASK 0x1f
+#define EMAC_STACR_PCDA_SHIFT 5
+#define EMAC_STACR_PRA_MASK 0x1f
-/* Transmit Request Threshold Register */
-#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */
-#define EMAC_TRTR_1024 0x0f000000
-#define EMAC_TRTR_512 0x07000000
-#define EMAC_TRTR_256 0x03000000
-#define EMAC_TRTR_192 0x10000000
-#define EMAC_TRTR_128 0x01000000
+/* EMACx_TRTR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_TRTR_SHIFT 27
+#else
+#define EMAC_TRTR_SHIFT 24
+#endif
+#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
+/* EMACx_RWMR */
+#if !defined(CONFIG_IBM_EMAC4)
+#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7))
+#else
+#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6))
+#endif
+
+/* EMAC specific TX descriptor control fields (write access) */
#define EMAC_TX_CTRL_GFCS 0x0200
#define EMAC_TX_CTRL_GP 0x0100
#define EMAC_TX_CTRL_ISA 0x0080
#define EMAC_TX_CTRL_RSA 0x0040
#define EMAC_TX_CTRL_IVT 0x0020
#define EMAC_TX_CTRL_RVT 0x0010
-#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */
-#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */
-#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */
+#define EMAC_TX_CTRL_TAH_CSUM 0x000e
-#define EMAC_TX_CTRL_DFLT ( \
- MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP )
-
-/* madmal transmit status / Control bits */
+/* EMAC specific TX descriptor status fields (read access) */
#define EMAC_TX_ST_BFCS 0x0200
-#define EMAC_TX_ST_BPP 0x0100
#define EMAC_TX_ST_LCS 0x0080
#define EMAC_TX_ST_ED 0x0040
#define EMAC_TX_ST_EC 0x0020
@@ -202,8 +280,16 @@
#define EMAC_TX_ST_SC 0x0004
#define EMAC_TX_ST_UR 0x0002
#define EMAC_TX_ST_SQE 0x0001
+#if !defined(CONFIG_IBM_EMAC_TAH)
+#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+ EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
+ EMAC_TX_ST_MC | EMAC_TX_ST_UR))
+#else
+#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
+ EMAC_TX_ST_EC | EMAC_TX_ST_LC))
+#endif
-/* madmal receive status / Control bits */
+/* EMAC specific RX descriptor status fields (read access) */
#define EMAC_RX_ST_OE 0x0200
#define EMAC_RX_ST_PP 0x0100
#define EMAC_RX_ST_BP 0x0080
@@ -214,54 +300,10 @@
#define EMAC_RX_ST_PTL 0x0004
#define EMAC_RX_ST_ORE 0x0002
#define EMAC_RX_ST_IRE 0x0001
-#define EMAC_BAD_RX_PACKET 0x02ff
-#define EMAC_CSUM_VER_ERROR 0x0003
-
-/* identify a bad rx packet dependent on emac features */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_IS_BAD_RX_PACKET(desc) \
- (((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \
- ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \
- ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE)))
-#else
-#define EMAC_IS_BAD_RX_PACKET(desc) \
- (desc & EMAC_BAD_RX_PACKET)
-#endif
-
-/* SoC implementation specific EMAC register defaults */
-#if defined(CONFIG_440GP)
-#define EMAC_RWMR_DEFAULT 0x80009000
-#define EMAC_TMR0_DEFAULT 0x00000000
-#define EMAC_TMR1_DEFAULT 0xf8640000
-#elif defined(CONFIG_440GX)
-#define EMAC_RWMR_DEFAULT 0x1000a200
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
-#define EMAC_TMR1_DEFAULT 0xa00f0000
-#elif defined(CONFIG_440SP)
-#define EMAC_RWMR_DEFAULT 0x08002000
-#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048
-#define EMAC_TMR1_DEFAULT 0xf8200000
-#else
-#define EMAC_RWMR_DEFAULT 0x0f002000
-#define EMAC_TMR0_DEFAULT 0x00000000
-#define EMAC_TMR1_DEFAULT 0x380f0000
-#endif /* CONFIG_440GP */
-
-/* Revision specific EMAC register defaults */
-#ifdef CONFIG_IBM_EMAC4
-#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \
- EMAC_M1_OPB_CLK_83 | \
- EMAC_M1_TX_MWSW)
-#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \
- EMAC_RMR_RFAF_128_2048)
-#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \
- EMAC_TMR0_DEFAULT)
-#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024
-#else /* !CONFIG_IBM_EMAC4 */
-#define EMAC_M1_DEFAULT EMAC_M1_BASE
-#define EMAC_RMR_DEFAULT EMAC_RMR_BASE
-#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0
-#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600
-#endif /* CONFIG_IBM_EMAC4 */
-
-#endif
+#define EMAC_RX_TAH_BAD_CSUM 0x0003
+#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
+ EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
+ EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
+ EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
+ EMAC_RX_ST_IRE )
+#endif /* __IBM_EMAC_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 14e9b631..943fbd1 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1,13 +1,14 @@
/*
- * ibm_emac_core.c
+ * drivers/net/ibm_emac/ibm_emac_core.c
*
- * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC
- * processors.
- *
- * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Driver for PowerPC 4xx on-chip ethernet controller.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
- *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
*
@@ -15,29 +16,24 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- * TODO
- * - Check for races in the "remove" code path
- * - Add some Power Management to the MAC and the PHY
- * - Audit remaining of non-rewritten code (--BenH)
- * - Cleanup message display using msglevel mecanism
- * - Address all errata
- * - Audit all register update paths to ensure they
- * are being written post soft reset if required.
+ *
*/
+
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/crc32.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/bitops.h>
@@ -45,1691 +41,1893 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/crc32.h>
-
#include "ibm_emac_core.h"
-
-//#define MDIO_DEBUG(fmt) printk fmt
-#define MDIO_DEBUG(fmt)
-
-//#define LINK_DEBUG(fmt) printk fmt
-#define LINK_DEBUG(fmt)
-
-//#define PKT_DEBUG(fmt) printk fmt
-#define PKT_DEBUG(fmt)
-
-#define DRV_NAME "emac"
-#define DRV_VERSION "2.0"
-#define DRV_AUTHOR "Benjamin Herrenschmidt <benh@kernel.crashing.org>"
-#define DRV_DESC "IBM EMAC Ethernet driver"
+#include "ibm_emac_debug.h"
/*
- * When mdio_idx >= 0, contains a list of emac ocp_devs
- * that have had their initialization deferred until the
- * common MDIO controller has been initialized.
+ * Lack of dma_unmap_???? calls is intentional.
+ *
+ * API-correct usage requires additional support state information to be
+ * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
+ * EMAC design (e.g. TX buffer passed from network stack can be split into
+ * several BDs, dma_map_single/dma_map_page can be used to map particular BD),
+ * maintaining such information will add additional overhead.
+ * Current DMA API implementation for 4xx processors only ensures cache coherency
+ * and dma_unmap_???? routines are empty and are likely to stay this way.
+ * I decided to omit dma_unmap_??? calls because I don't want to add additional
+ * complexity just for the sake of following some abstract API, when it doesn't
+ * add any real benefit to the driver. I understand that this decision maybe
+ * controversial, but I really tried to make code API-correct and efficient
+ * at the same time and didn't come up with code I liked :(. --ebs
*/
-LIST_HEAD(emac_init_list);
-MODULE_AUTHOR(DRV_AUTHOR);
+#define DRV_NAME "emac"
+#define DRV_VERSION "3.53"
+#define DRV_DESC "PPC 4xx OCP EMAC driver"
+
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR
+ ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
MODULE_LICENSE("GPL");
-static int skb_res = SKB_RES;
-module_param(skb_res, int, 0444);
-MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n"
- "The 405 handles a misaligned IP header fine but\n"
- "this can help if you are routing to a tunnel or a\n"
- "device that needs aligned data. 0..2");
+/* minimum number of free TX descriptors required to wake up TX process */
+#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
-#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev))
-
-static unsigned int rgmii_enable[] = {
- RGMII_RTBI,
- RGMII_RGMII,
- RGMII_TBI,
- RGMII_GMII
-};
-
-static unsigned int rgmii_speed_mask[] = {
- RGMII_MII2_SPDMASK,
- RGMII_MII3_SPDMASK
-};
-
-static unsigned int rgmii_speed100[] = {
- RGMII_MII2_100MB,
- RGMII_MII3_100MB
-};
-
-static unsigned int rgmii_speed1000[] = {
- RGMII_MII2_1000MB,
- RGMII_MII3_1000MB
-};
-
-#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev))
-
-static unsigned int zmii_enable[][4] = {
- {ZMII_SMII0, ZMII_RMII0, ZMII_MII0,
- ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)},
- {ZMII_SMII1, ZMII_RMII1, ZMII_MII1,
- ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)},
- {ZMII_SMII2, ZMII_RMII2, ZMII_MII2,
- ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)},
- {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)}
-};
-
-static unsigned int mdi_enable[] = {
- ZMII_MDI0,
- ZMII_MDI1,
- ZMII_MDI2,
- ZMII_MDI3
-};
-
-static unsigned int zmii_speed = 0x0;
-static unsigned int zmii_speed100[] = {
- ZMII_MII0_100MB,
- ZMII_MII1_100MB,
- ZMII_MII2_100MB,
- ZMII_MII3_100MB
-};
+/* If packet size is less than this number, we allocate small skb and copy packet
+ * contents into it instead of just sending original big skb up
+ */
+#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
/* Since multiple EMACs share MDIO lines in various ways, we need
* to avoid re-using the same PHY ID in cases where the arch didn't
* setup precise phy_map entries
*/
-static u32 busy_phy_map = 0;
+static u32 busy_phy_map;
-/* If EMACs share a common MDIO device, this points to it */
-static struct net_device *mdio_ndev = NULL;
-
-struct emac_def_dev {
- struct list_head link;
- struct ocp_device *ocpdev;
- struct ibm_ocp_mal *mal;
-};
-
-static struct net_device_stats *emac_stats(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- return &fep->stats;
-};
-
-static int
-emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev);
- const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" };
- int mode = -1;
-
- if (!rgmii) {
- rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
-
- if (rgmii == NULL) {
- printk(KERN_ERR
- "rgmii%d: Out of memory allocating RGMII structure!\n",
- rgmii_dev->def->index);
- return -ENOMEM;
- }
-
- memset(rgmii, 0, sizeof(*rgmii));
-
- rgmii->base =
- (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr,
- sizeof(*rgmii->base));
- if (rgmii->base == NULL) {
- printk(KERN_ERR
- "rgmii%d: Cannot ioremap bridge registers!\n",
- rgmii_dev->def->index);
-
- kfree(rgmii);
- return -ENOMEM;
- }
- ocp_set_drvdata(rgmii_dev, rgmii);
- }
-
- if (phy_mode) {
- switch (phy_mode) {
- case PHY_MODE_GMII:
- mode = GMII;
- break;
- case PHY_MODE_TBI:
- mode = TBI;
- break;
- case PHY_MODE_RTBI:
- mode = RTBI;
- break;
- case PHY_MODE_RGMII:
- default:
- mode = RGMII;
- }
- rgmii->base->fer &= ~RGMII_FER_MASK(input);
- rgmii->base->fer |= rgmii_enable[mode] << (4 * input);
- } else {
- switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 *
- input)) {
- case RGMII_RTBI:
- mode = RTBI;
- break;
- case RGMII_RGMII:
- mode = RGMII;
- break;
- case RGMII_TBI:
- mode = TBI;
- break;
- case RGMII_GMII:
- mode = GMII;
- }
- }
-
- /* Set mode to RGMII if nothing valid is detected */
- if (mode < 0)
- mode = RGMII;
-
- printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
- rgmii_dev->def->index, input, mode_name[mode]);
-
- rgmii->mode[input] = mode;
- rgmii->users++;
-
- return 0;
-}
-
-static void
-emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
- unsigned int rgmii_speed;
-
- rgmii_speed = in_be32(&rgmii->base->ssr);
-
- rgmii_speed &= ~rgmii_speed_mask[input];
-
- if (speed == 1000)
- rgmii_speed |= rgmii_speed1000[input];
- else if (speed == 100)
- rgmii_speed |= rgmii_speed100[input];
-
- out_be32(&rgmii->base->ssr, rgmii_speed);
-}
-
-static void emac_close_rgmii(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev);
- BUG_ON(!rgmii || rgmii->users == 0);
-
- if (!--rgmii->users) {
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)rgmii->base);
- kfree(rgmii);
- }
-}
-
-static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev);
- const char *mode_name[] = { "SMII", "RMII", "MII" };
- int mode = -1;
-
- if (!zmii) {
- zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
- if (zmii == NULL) {
- printk(KERN_ERR
- "zmii%d: Out of memory allocating ZMII structure!\n",
- zmii_dev->def->index);
- return -ENOMEM;
- }
- memset(zmii, 0, sizeof(*zmii));
-
- zmii->base =
- (struct zmii_regs *)ioremap(zmii_dev->def->paddr,
- sizeof(*zmii->base));
- if (zmii->base == NULL) {
- printk(KERN_ERR
- "zmii%d: Cannot ioremap bridge registers!\n",
- zmii_dev->def->index);
-
- kfree(zmii);
- return -ENOMEM;
- }
- ocp_set_drvdata(zmii_dev, zmii);
- }
-
- if (phy_mode) {
- switch (phy_mode) {
- case PHY_MODE_MII:
- mode = MII;
- break;
- case PHY_MODE_RMII:
- mode = RMII;
- break;
- case PHY_MODE_SMII:
- default:
- mode = SMII;
- }
- zmii->base->fer &= ~ZMII_FER_MASK(input);
- zmii->base->fer |= zmii_enable[input][mode];
- } else {
- switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) {
- case ZMII_MII0:
- mode = MII;
- break;
- case ZMII_RMII0:
- mode = RMII;
- break;
- case ZMII_SMII0:
- mode = SMII;
- }
- }
-
- /* Set mode to SMII if nothing valid is detected */
- if (mode < 0)
- mode = SMII;
-
- printk(KERN_NOTICE "zmii%d: input %d in %s mode\n",
- zmii_dev->def->index, input, mode_name[mode]);
-
- zmii->mode[input] = mode;
- zmii->users++;
-
- return 0;
-}
-
-static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input)
-{
- u32 mask;
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
- mask = in_be32(&zmii->base->fer);
- mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */
- mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input];
- out_be32(&zmii->base->fer, mask);
-}
-
-static void
-emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
-
- if (speed == 100)
- zmii_speed |= zmii_speed100[input];
- else
- zmii_speed &= ~zmii_speed100[input];
-
- out_be32(&zmii->base->ssr, zmii_speed);
-}
-
-static void emac_close_zmii(struct ocp_device *ocpdev)
-{
- struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev);
- BUG_ON(!zmii || zmii->users == 0);
-
- if (!--zmii->users) {
- ocp_set_drvdata(ocpdev, NULL);
- iounmap((void *)zmii->base);
- kfree(zmii);
- }
-}
-
-int emac_phy_read(struct net_device *dev, int mii_id, int reg)
-{
- int count;
- uint32_t stacr;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id,
- reg));
-
- /* Enable proper ZMII port */
- if (fep->zmii_dev)
- emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
-
- /* Use the EMAC that has the MDIO port */
- if (fep->mdio_dev) {
- dev = fep->mdio_dev;
- fep = dev->priv;
- emacp = fep->emacp;
- }
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
- return -1;
- }
-
- /* Clear the speed bits and make a read request to the PHY */
- stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
- stacr |= ((mii_id & 0x1F) << 5);
-
- out_be32(&emacp->em0stacr, stacr);
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
- return -1;
- }
-
- /* Check for a read error */
- if (stacr & EMAC_STACR_PHYE) {
- MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
- return -1;
- }
-
- MDIO_DEBUG((" -> 0x%x\n", stacr >> 16));
-
- return (stacr >> 16);
-}
-
-void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data)
-{
- int count;
- uint32_t stacr;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n",
- dev->name, mii_id, reg, data));
-
- /* Enable proper ZMII port */
- if (fep->zmii_dev)
- emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input);
-
- /* Use the EMAC that has the MDIO port */
- if (fep->mdio_dev) {
- dev = fep->mdio_dev;
- fep = dev->priv;
- emacp = fep->emacp;
- }
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0) {
- printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
- return;
- }
-
- /* Clear the speed bits and make a read request to the PHY */
-
- stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
- stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
-
- out_be32(&emacp->em0stacr, stacr);
-
- count = 0;
- while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
- && (count++ < MDIO_DELAY))
- udelay(1);
- MDIO_DEBUG((" (count was %d)\n", count));
-
- if ((stacr & EMAC_STACR_OC) == 0)
- printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
-
- /* Check for a write error */
- if ((stacr & EMAC_STACR_PHYE) != 0) {
- MDIO_DEBUG(("EMAC MDIO PHY error !\n"));
- }
-}
-
-static void emac_txeob_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
- unsigned long flags;
-
- spin_lock_irqsave(&fep->lock, flags);
-
- PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt));
-
- while (fep->tx_cnt &&
- !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) {
-
- if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) {
- /* Tell the system the transmit completed. */
- dma_unmap_single(&fep->ocpdev->dev,
- fep->tx_desc[fep->ack_slot].data_ptr,
- fep->tx_desc[fep->ack_slot].data_len,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]);
-
- if (fep->tx_desc[fep->ack_slot].ctrl &
- (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC))
- fep->stats.collisions++;
- }
-
- fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL;
- if (++fep->ack_slot == NUM_TX_BUFF)
- fep->ack_slot = 0;
-
- fep->tx_cnt--;
- }
- if (fep->tx_cnt < NUM_TX_BUFF)
- netif_wake_queue(dev);
-
- PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt));
-
- spin_unlock_irqrestore(&fep->lock, flags);
-}
-
-/*
- Fill/Re-fill the rx chain with valid ctrl/ptrs.
- This function will fill from rx_slot up to the parm end.
- So to completely fill the chain pre-set rx_slot to 0 and
- pass in an end of 0.
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
+/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
+ * with PHY RX clock problem.
+ * 440EP has more sane SDR0_MFR register implementation than 440GX, which
+ * also allows controlling each EMAC clock
*/
-static void emac_rx_fill(struct net_device *dev, int end)
+static inline void EMAC_RX_CLK_TX(int idx)
{
- int i;
- struct ocp_enet_private *fep = dev->priv;
-
- i = fep->rx_slot;
- do {
- /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb,
- * it breaks our cache line alignement. However, we still allocate
- * +16 so that we end up allocating the exact same size as
- * dev_alloc_skb() would do.
- * Also, because of the skb_res, the max DMA size we give to EMAC
- * is slighly wrong, causing it to potentially DMA 2 more bytes
- * from a broken/oversized packet. These 16 bytes will take care
- * that we don't walk on somebody else toes with that.
- */
- fep->rx_skb[i] =
- alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC);
-
- if (fep->rx_skb[i] == NULL) {
- /* Keep rx_slot here, the next time clean/fill is called
- * we will try again before the MAL wraps back here
- * If the MAL tries to use this descriptor with
- * the EMPTY bit off it will cause the
- * rxde interrupt. That is where we will
- * try again to allocate an sk_buff.
- */
- break;
-
- }
-
- if (skb_res)
- skb_reserve(fep->rx_skb[i], skb_res);
-
- /* We must NOT dma_map_single the cache line right after the
- * buffer, so we must crop our sync size to account for the
- * reserved space
- */
- fep->rx_desc[i].data_ptr =
- (unsigned char *)dma_map_single(&fep->ocpdev->dev,
- (void *)fep->rx_skb[i]->
- data,
- fep->rx_buffer_size -
- skb_res, DMA_FROM_DEVICE);
-
- /*
- * Some 4xx implementations use the previously
- * reserved bits in data_len to encode the MS
- * 4-bits of a 36-bit physical address (ERPN)
- * This must be initialized.
- */
- fep->rx_desc[i].data_len = 0;
- fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR |
- (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
-
- } while ((i = (i + 1) % NUM_RX_BUFF) != end);
-
- fep->rx_slot = i;
-}
-
-static void
-emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb)
-{
- struct ocp_enet_private *fep = dev->priv;
-
- /* Exit if interface has no TAH engine */
- if (!fep->tah_dev) {
- skb->ip_summed = CHECKSUM_NONE;
- return;
- }
-
- /* Check for TCP/UDP/IP csum error */
- if (ctrl & EMAC_CSUM_VER_ERROR) {
- /* Let the stack verify checksum errors */
- skb->ip_summed = CHECKSUM_NONE;
-/* adapter->hw_csum_err++; */
- } else {
- /* Csum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-/* adapter->hw_csum_good++; */
- }
-}
-
-static int emac_rx_clean(struct net_device *dev)
-{
- int i, b, bnum = 0, buf[6];
- int error, frame_length;
- struct ocp_enet_private *fep = dev->priv;
- unsigned short ctrl;
-
- i = fep->rx_slot;
-
- PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot));
-
- do {
- if (fep->rx_skb[i] == NULL)
- continue; /*we have already handled the packet but haved failed to alloc */
- /*
- since rx_desc is in uncached mem we don't keep reading it directly
- we pull out a local copy of ctrl and do the checks on the copy.
- */
- ctrl = fep->rx_desc[i].ctrl;
- if (ctrl & MAL_RX_CTRL_EMPTY)
- break; /*we don't have any more ready packets */
-
- if (EMAC_IS_BAD_RX_PACKET(ctrl)) {
- fep->stats.rx_errors++;
- fep->stats.rx_dropped++;
-
- if (ctrl & EMAC_RX_ST_OE)
- fep->stats.rx_fifo_errors++;
- if (ctrl & EMAC_RX_ST_AE)
- fep->stats.rx_frame_errors++;
- if (ctrl & EMAC_RX_ST_BFCS)
- fep->stats.rx_crc_errors++;
- if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL |
- EMAC_RX_ST_ORE | EMAC_RX_ST_IRE))
- fep->stats.rx_length_errors++;
- } else {
- if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) ==
- (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) {
- /* Single descriptor packet */
- emac_rx_csum(dev, ctrl, fep->rx_skb[i]);
- /* Send the skb up the chain. */
- frame_length = fep->rx_desc[i].data_len - 4;
- skb_put(fep->rx_skb[i], frame_length);
- fep->rx_skb[i]->dev = dev;
- fep->rx_skb[i]->protocol =
- eth_type_trans(fep->rx_skb[i], dev);
- error = netif_rx(fep->rx_skb[i]);
-
- if ((error == NET_RX_DROP) ||
- (error == NET_RX_BAD)) {
- fep->stats.rx_dropped++;
- } else {
- fep->stats.rx_packets++;
- fep->stats.rx_bytes += frame_length;
- }
- fep->rx_skb[i] = NULL;
- } else {
- /* Multiple descriptor packet */
- if (ctrl & MAL_RX_CTRL_FIRST) {
- if (fep->rx_desc[(i + 1) % NUM_RX_BUFF].
- ctrl & MAL_RX_CTRL_EMPTY)
- break;
- bnum = 0;
- buf[bnum] = i;
- ++bnum;
- continue;
- }
- if (((ctrl & MAL_RX_CTRL_FIRST) !=
- MAL_RX_CTRL_FIRST) &&
- ((ctrl & MAL_RX_CTRL_LAST) !=
- MAL_RX_CTRL_LAST)) {
- if (fep->rx_desc[(i + 1) %
- NUM_RX_BUFF].ctrl &
- MAL_RX_CTRL_EMPTY) {
- i = buf[0];
- break;
- }
- buf[bnum] = i;
- ++bnum;
- continue;
- }
- if (ctrl & MAL_RX_CTRL_LAST) {
- buf[bnum] = i;
- ++bnum;
- skb_put(fep->rx_skb[buf[0]],
- fep->rx_desc[buf[0]].data_len);
- for (b = 1; b < bnum; b++) {
- /*
- * MAL is braindead, we need
- * to copy the remainder
- * of the packet from the
- * latter descriptor buffers
- * to the first skb. Then
- * dispose of the source
- * skbs.
- *
- * Once the stack is fixed
- * to handle frags on most
- * protocols we can generate
- * a fragmented skb with
- * no copies.
- */
- memcpy(fep->rx_skb[buf[0]]->
- data +
- fep->rx_skb[buf[0]]->len,
- fep->rx_skb[buf[b]]->
- data,
- fep->rx_desc[buf[b]].
- data_len);
- skb_put(fep->rx_skb[buf[0]],
- fep->rx_desc[buf[b]].
- data_len);
- dma_unmap_single(&fep->ocpdev->
- dev,
- fep->
- rx_desc[buf
- [b]].
- data_ptr,
- fep->
- rx_desc[buf
- [b]].
- data_len,
- DMA_FROM_DEVICE);
- dev_kfree_skb(fep->
- rx_skb[buf[b]]);
- }
- emac_rx_csum(dev, ctrl,
- fep->rx_skb[buf[0]]);
-
- fep->rx_skb[buf[0]]->dev = dev;
- fep->rx_skb[buf[0]]->protocol =
- eth_type_trans(fep->rx_skb[buf[0]],
- dev);
- error = netif_rx(fep->rx_skb[buf[0]]);
-
- if ((error == NET_RX_DROP)
- || (error == NET_RX_BAD)) {
- fep->stats.rx_dropped++;
- } else {
- fep->stats.rx_packets++;
- fep->stats.rx_bytes +=
- fep->rx_skb[buf[0]]->len;
- }
- for (b = 0; b < bnum; b++)
- fep->rx_skb[buf[b]] = NULL;
- }
- }
- }
- } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot);
-
- PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot));
-
- return i;
-}
-
-static void emac_rxeob_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
unsigned long flags;
+ local_irq_save(flags);
+
+#if defined(CONFIG_405EP)
+ mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
+#else /* CONFIG_440EP */
+ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
+#endif
+
+ local_irq_restore(flags);
+}
+
+static inline void EMAC_RX_CLK_DEFAULT(int idx)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+
+#if defined(CONFIG_405EP)
+ mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
+#else /* CONFIG_440EP */
+ SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
+#endif
+
+ local_irq_restore(flags);
+}
+#else
+#define EMAC_RX_CLK_TX(idx) ((void)0)
+#define EMAC_RX_CLK_DEFAULT(idx) ((void)0)
+#endif
+
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
+/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
+ * unfortunately this is less flexible than 440EP case, because it's a global
+ * setting for all EMACs, therefore we do this clock trick only during probe.
+ */
+#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \
+ SDR_READ(DCRN_SDR_MFR) | 0x08000000)
+#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \
+ SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
+#else
+#define EMAC_CLK_INTERNAL ((void)0)
+#define EMAC_CLK_EXTERNAL ((void)0)
+#endif
+
+/* I don't want to litter system log with timeout errors
+ * when we have brain-damaged PHY.
+ */
+static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
+ const char *error)
+{
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+ DBG("%d: %s" NL, dev->def->index, error);
+#else
+ if (net_ratelimit())
+ printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
+#endif
+}
+
+/* PHY polling intervals */
+#define PHY_POLL_LINK_ON HZ
+#define PHY_POLL_LINK_OFF (HZ / 5)
+
+/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
+static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
+ "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
+ "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
+ "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
+ "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
+ "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
+ "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
+ "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
+ "rx_bad_packet", "rx_runt_packet", "rx_short_event",
+ "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
+ "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
+ "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
+ "tx_bd_excessive_collisions", "tx_bd_late_collision",
+ "tx_bd_multple_collisions", "tx_bd_single_collision",
+ "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
+ "tx_errors"
+};
+
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs);
+static void emac_clean_tx_ring(struct ocp_enet_private *dev);
+
+static inline int emac_phy_supports_gige(int phy_mode)
+{
+ return phy_mode == PHY_MODE_GMII ||
+ phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline int emac_phy_gpcs(int phy_mode)
+{
+ return phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline void emac_tx_enable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: tx_enable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (!(r & EMAC_MR0_TXE))
+ out_be32(&p->mr0, r | EMAC_MR0_TXE);
+ local_irq_restore(flags);
+}
+
+static void emac_tx_disable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: tx_disable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_TXE) {
+ int n = 300;
+ out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
+ while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev, "TX disable timeout");
+ }
+ local_irq_restore(flags);
+}
+
+static void emac_rx_enable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+ if (unlikely(dev->commac.rx_stopped))
+ goto out;
+
+ DBG("%d: rx_enable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (!(r & EMAC_MR0_RXE)) {
+ if (unlikely(!(r & EMAC_MR0_RXI))) {
+ /* Wait if previous async disable is still in progress */
+ int n = 100;
+ while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev,
+ "RX disable timeout");
+ }
+ out_be32(&p->mr0, r | EMAC_MR0_RXE);
+ }
+ out:
+ local_irq_restore(flags);
+}
+
+static void emac_rx_disable(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: rx_disable" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_RXE) {
+ int n = 300;
+ out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+ while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n)
+ --n;
+ if (unlikely(!n))
+ emac_report_timeout_error(dev, "RX disable timeout");
+ }
+ local_irq_restore(flags);
+}
+
+static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ u32 r;
+
+ local_irq_save(flags);
+
+ DBG("%d: rx_disable_async" NL, dev->def->index);
+
+ r = in_be32(&p->mr0);
+ if (r & EMAC_MR0_RXE)
+ out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
+ local_irq_restore(flags);
+}
+
+static int emac_reset(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ unsigned long flags;
+ int n = 20;
+
+ DBG("%d: reset" NL, dev->def->index);
+
+ local_irq_save(flags);
+
+ if (!dev->reset_failed) {
+ /* 40x erratum suggests stopping RX channel before reset,
+ * we stop TX as well
+ */
+ emac_rx_disable(dev);
+ emac_tx_disable(dev);
+ }
+
+ out_be32(&p->mr0, EMAC_MR0_SRST);
+ while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
+ --n;
+ local_irq_restore(flags);
+
+ if (n) {
+ dev->reset_failed = 0;
+ return 0;
+ } else {
+ emac_report_timeout_error(dev, "reset timeout");
+ dev->reset_failed = 1;
+ return -ETIMEDOUT;
+ }
+}
+
+static void emac_hash_mc(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ u16 gaht[4] = { 0 };
+ struct dev_mc_list *dmi;
+
+ DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
+
+ for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
+ int bit;
+ DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL,
+ dev->def->index,
+ dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2],
+ dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]);
+
+ bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
+ gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
+ }
+ out_be32(&p->gaht1, gaht[0]);
+ out_be32(&p->gaht2, gaht[1]);
+ out_be32(&p->gaht3, gaht[2]);
+ out_be32(&p->gaht4, gaht[3]);
+}
+
+static inline u32 emac_iff2rmr(struct net_device *ndev)
+{
+ u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
+ EMAC_RMR_BASE;
+
+ if (ndev->flags & IFF_PROMISC)
+ r |= EMAC_RMR_PME;
+ else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
+ r |= EMAC_RMR_PMME;
+ else if (ndev->mc_count > 0)
+ r |= EMAC_RMR_MAE;
+
+ return r;
+}
+
+static inline int emac_opb_mhz(void)
+{
+ return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
+}
+
+/* BHs disabled */
+static int emac_configure(struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+ struct net_device *ndev = dev->ndev;
+ int gige;
+ u32 r;
+
+ DBG("%d: configure" NL, dev->def->index);
+
+ if (emac_reset(dev) < 0)
+ return -ETIMEDOUT;
+
+ tah_reset(dev->tah_dev);
+
+ /* Mode register */
+ r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
+ if (dev->phy.duplex == DUPLEX_FULL)
+ r |= EMAC_MR1_FDE;
+ switch (dev->phy.speed) {
+ case SPEED_1000:
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ r |= EMAC_MR1_MF_1000GPCS |
+ EMAC_MR1_MF_IPPA(dev->phy.address);
+
+ /* Put some arbitrary OUI, Manuf & Rev IDs so we can
+ * identify this GPCS PHY later.
+ */
+ out_be32(&p->ipcr, 0xdeadbeef);
+ } else
+ r |= EMAC_MR1_MF_1000;
+ r |= EMAC_MR1_RFS_16K;
+ gige = 1;
+
+ if (dev->ndev->mtu > ETH_DATA_LEN)
+ r |= EMAC_MR1_JPSM;
+ break;
+ case SPEED_100:
+ r |= EMAC_MR1_MF_100;
+ /* Fall through */
+ default:
+ r |= EMAC_MR1_RFS_4K;
+ gige = 0;
+ break;
+ }
+
+ if (dev->rgmii_dev)
+ rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
+ dev->phy.speed);
+ else
+ zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
+
+#if !defined(CONFIG_40x)
+ /* on 40x erratum forces us to NOT use integrated flow control,
+ * let's hope it works on 44x ;)
+ */
+ if (dev->phy.duplex == DUPLEX_FULL) {
+ if (dev->phy.pause)
+ r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
+ else if (dev->phy.asym_pause)
+ r |= EMAC_MR1_APP;
+ }
+#endif
+ out_be32(&p->mr1, r);
+
+ /* Set individual MAC address */
+ out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
+ out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
+ (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
+ ndev->dev_addr[5]);
+
+ /* VLAN Tag Protocol ID */
+ out_be32(&p->vtpid, 0x8100);
+
+ /* Receive mode register */
+ r = emac_iff2rmr(ndev);
+ if (r & EMAC_RMR_MAE)
+ emac_hash_mc(dev);
+ out_be32(&p->rmr, r);
+
+ /* FIFOs thresholds */
+ r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
+ EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
+ out_be32(&p->tmr1, r);
+ out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
+
+ /* PAUSE frame is sent when RX FIFO reaches its high-water mark,
+ there should be still enough space in FIFO to allow the our link
+ partner time to process this frame and also time to send PAUSE
+ frame itself.
+
+ Here is the worst case scenario for the RX FIFO "headroom"
+ (from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
+
+ 1) One maximum-length frame on TX 1522 bytes
+ 2) One PAUSE frame time 64 bytes
+ 3) PAUSE frame decode time allowance 64 bytes
+ 4) One maximum-length frame on RX 1522 bytes
+ 5) Round-trip propagation delay of the link (100Mb) 15 bytes
+ ----------
+ 3187 bytes
+
+ I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
+ low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
+ */
+ r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
+ EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
+ out_be32(&p->rwmr, r);
+
+ /* Set PAUSE timer to the maximum */
+ out_be32(&p->ptr, 0xffff);
+
+ /* IRQ sources */
+ out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
+ EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
+ EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
+ EMAC_ISR_IRE | EMAC_ISR_TE);
+
+ /* We need to take GPCS PHY out of isolate mode after EMAC reset */
+ if (emac_phy_gpcs(dev->phy.mode))
+ mii_reset_phy(&dev->phy);
+
+ return 0;
+}
+
+/* BHs disabled */
+static void emac_reinitialize(struct ocp_enet_private *dev)
+{
+ DBG("%d: reinitialize" NL, dev->def->index);
+
+ if (!emac_configure(dev)) {
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+ }
+}
+
+/* BHs disabled */
+static void emac_full_tx_reset(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ DBG("%d: full_tx_reset" NL, dev->def->index);
+
+ emac_tx_disable(dev);
+ mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ emac_clean_tx_ring(dev);
+ dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
+
+ emac_configure(dev);
+
+ mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+
+ netif_wake_queue(ndev);
+}
+
+static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
+{
+ struct emac_regs *p = dev->emacp;
+ u32 r;
int n;
- spin_lock_irqsave(&fep->lock, flags);
- if ((n = emac_rx_clean(dev)) != fep->rx_slot)
- emac_rx_fill(dev, n);
- spin_unlock_irqrestore(&fep->lock, flags);
-}
+ DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
-/*
- * This interrupt should never occurr, we don't program
- * the MAL for contiunous mode.
- */
-static void emac_txde_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
+ /* Enable proper MDIO port */
+ zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
- printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name);
-
- emac_mac_dump(dev);
- emac_mal_dump(dev);
-
- /* Reenable the transmit channel */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-}
-
-/*
- * This interrupt should be very rare at best. This occurs when
- * the hardware has a problem with the receive descriptors. The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set. The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way. At that point the driver
- * will be restarted.
- */
-static void emac_rxde_dev(void *param, u32 chanmask)
-{
- struct net_device *dev = param;
- struct ocp_enet_private *fep = dev->priv;
- unsigned long flags;
-
- if (net_ratelimit()) {
- printk(KERN_WARNING "%s: receive descriptor error\n",
- fep->ndev->name);
-
- emac_mac_dump(dev);
- emac_mal_dump(dev);
- emac_desc_dump(dev);
+ /* Wait for management interface to become idle */
+ n = 10;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
}
- /* Disable RX channel */
- spin_lock_irqsave(&fep->lock, flags);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
+ /* Issue read command */
+ out_be32(&p->stacr,
+ EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
+ (reg & EMAC_STACR_PRA_MASK)
+ | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
- /* For now, charge the error against all emacs */
- fep->stats.rx_errors++;
+ /* Wait for read to complete */
+ n = 100;
+ while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
- /* so do we have any good packets still? */
- emac_rx_clean(dev);
+ if (unlikely(r & EMAC_STACR_PHYE)) {
+ DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
+ id, reg);
+ return -EREMOTEIO;
+ }
- /* When the interface is restarted it resets processing to the
- * first descriptor in the table.
+ r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
+ DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
+ return r;
+ to:
+ DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
+ return -ETIMEDOUT;
+}
+
+static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
+ u16 val)
+{
+ struct emac_regs *p = dev->emacp;
+ int n;
+
+ DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
+ val);
+
+ /* Enable proper MDIO port */
+ zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
+
+ /* Wait for management interface to be idle */
+ n = 10;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
+
+ /* Issue write command */
+ out_be32(&p->stacr,
+ EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
+ (reg & EMAC_STACR_PRA_MASK) |
+ ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
+ (val << EMAC_STACR_PHYD_SHIFT));
+
+ /* Wait for write to complete */
+ n = 100;
+ while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ udelay(1);
+ if (!--n)
+ goto to;
+ }
+ return;
+ to:
+ DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
+}
+
+static int emac_mdio_read(struct net_device *ndev, int id, int reg)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int res;
+
+ local_bh_disable();
+ res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+ (u8) reg);
+ local_bh_enable();
+ return res;
+}
+
+static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ local_bh_disable();
+ __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
+ (u8) reg, (u16) val);
+ local_bh_enable();
+}
+
+/* BHs disabled */
+static void emac_set_multicast_list(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct emac_regs *p = dev->emacp;
+ u32 rmr = emac_iff2rmr(ndev);
+
+ DBG("%d: multicast %08x" NL, dev->def->index, rmr);
+ BUG_ON(!netif_running(dev->ndev));
+
+ /* I decided to relax register access rules here to avoid
+ * full EMAC reset.
+ *
+ * There is a real problem with EMAC4 core if we use MWSW_001 bit
+ * in MR1 register and do a full EMAC reset.
+ * One TX BD status update is delayed and, after EMAC reset, it
+ * never happens, resulting in TX hung (it'll be recovered by TX
+ * timeout handler eventually, but this is just gross).
+ * So we either have to do full TX reset or try to cheat here :)
+ *
+ * The only required change is to RX mode register, so I *think* all
+ * we need is just to stop RX channel. This seems to work on all
+ * tested SoCs. --ebs
*/
-
- fep->rx_slot = 0;
- emac_rx_fill(dev, 0);
-
- set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask);
- set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask);
-
- /* Reenable the receive channels */
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- spin_unlock_irqrestore(&fep->lock, flags);
+ emac_rx_disable(dev);
+ if (rmr & EMAC_RMR_MAE)
+ emac_hash_mc(dev);
+ out_be32(&p->rmr, rmr);
+ emac_rx_enable(dev);
}
-static irqreturn_t
-emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+/* BHs disabled */
+static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
{
- struct net_device *dev = dev_instance;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- unsigned long tmp_em0isr;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+ int rx_sync_size = emac_rx_sync_size(new_mtu);
+ int rx_skb_size = emac_rx_skb_size(new_mtu);
+ int i, ret = 0;
- /* EMAC interrupt */
- tmp_em0isr = in_be32(&emacp->em0isr);
- if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) {
- /* This error is a hard transmit error - could retransmit */
- fep->stats.tx_errors++;
+ emac_rx_disable(dev);
+ mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
- /* Reenable the transmit channel */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
-
- } else {
- fep->stats.rx_errors++;
+ if (dev->rx_sg_skb) {
+ ++dev->estats.rx_dropped_resize;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
}
- if (tmp_em0isr & EMAC_ISR_RP)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_ALE)
- fep->stats.rx_frame_errors++;
- if (tmp_em0isr & EMAC_ISR_BFCS)
- fep->stats.rx_crc_errors++;
- if (tmp_em0isr & EMAC_ISR_PTLE)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_ORE)
- fep->stats.rx_length_errors++;
- if (tmp_em0isr & EMAC_ISR_TE0)
- fep->stats.tx_aborted_errors++;
+ /* Make a first pass over RX ring and mark BDs ready, dropping
+ * non-processed packets on the way. We need this as a separate pass
+ * to simplify error recovery in the case of allocation failure later.
+ */
+ for (i = 0; i < NUM_RX_BUFF; ++i) {
+ if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
+ ++dev->estats.rx_dropped_resize;
- emac_err_dump(dev, tmp_em0isr);
+ dev->rx_desc[i].data_len = 0;
+ dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
+ (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+ }
- out_be32(&emacp->em0isr, tmp_em0isr);
+ /* Reallocate RX ring only if bigger skb buffers are required */
+ if (rx_skb_size <= dev->rx_skb_size)
+ goto skip;
+
+ /* Second pass, allocate new skbs */
+ for (i = 0; i < NUM_RX_BUFF; ++i) {
+ struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
+ if (!skb) {
+ ret = -ENOMEM;
+ goto oom;
+ }
+
+ BUG_ON(!dev->rx_skb[i]);
+ dev_kfree_skb(dev->rx_skb[i]);
+
+ skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+ dev->rx_desc[i].data_ptr =
+ dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
+ DMA_FROM_DEVICE) + 2;
+ dev->rx_skb[i] = skb;
+ }
+ skip:
+ /* Check if we need to change "Jumbo" bit in MR1 */
+ if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
+ /* This is to prevent starting RX channel in emac_rx_enable() */
+ dev->commac.rx_stopped = 1;
+
+ dev->ndev->mtu = new_mtu;
+ emac_full_tx_reset(dev->ndev);
+ }
+
+ mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
+ oom:
+ /* Restart RX */
+ dev->commac.rx_stopped = dev->rx_slot = 0;
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_rx_enable(dev);
+
+ return ret;
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_change_mtu(struct net_device *ndev, int new_mtu)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int ret = 0;
+
+ if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
+ return -EINVAL;
+
+ DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
+
+ local_bh_disable();
+ if (netif_running(ndev)) {
+ /* Check if we really need to reinitalize RX ring */
+ if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
+ ret = emac_resize_rx_ring(dev, new_mtu);
+ }
+
+ if (!ret) {
+ ndev->mtu = new_mtu;
+ dev->rx_skb_size = emac_rx_skb_size(new_mtu);
+ dev->rx_sync_size = emac_rx_sync_size(new_mtu);
+ }
+ local_bh_enable();
+
+ return ret;
+}
+
+static void emac_clean_tx_ring(struct ocp_enet_private *dev)
+{
+ int i;
+ for (i = 0; i < NUM_TX_BUFF; ++i) {
+ if (dev->tx_skb[i]) {
+ dev_kfree_skb(dev->tx_skb[i]);
+ dev->tx_skb[i] = NULL;
+ if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
+ ++dev->estats.tx_dropped;
+ }
+ dev->tx_desc[i].ctrl = 0;
+ dev->tx_desc[i].data_ptr = 0;
+ }
+}
+
+static void emac_clean_rx_ring(struct ocp_enet_private *dev)
+{
+ int i;
+ for (i = 0; i < NUM_RX_BUFF; ++i)
+ if (dev->rx_skb[i]) {
+ dev->rx_desc[i].ctrl = 0;
+ dev_kfree_skb(dev->rx_skb[i]);
+ dev->rx_skb[i] = NULL;
+ dev->rx_desc[i].data_ptr = 0;
+ }
+
+ if (dev->rx_sg_skb) {
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ }
+}
+
+static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
+ int flags)
+{
+ struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
+ if (unlikely(!skb))
+ return -ENOMEM;
+
+ dev->rx_skb[slot] = skb;
+ dev->rx_desc[slot].data_len = 0;
+
+ skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
+ dev->rx_desc[slot].data_ptr =
+ dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size,
+ DMA_FROM_DEVICE) + 2;
+ barrier();
+ dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+ (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+
+ return 0;
+}
+
+static void emac_print_link_status(struct ocp_enet_private *dev)
+{
+ if (netif_carrier_ok(dev->ndev))
+ printk(KERN_INFO "%s: link is up, %d %s%s\n",
+ dev->ndev->name, dev->phy.speed,
+ dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
+ dev->phy.pause ? ", pause enabled" :
+ dev->phy.asym_pause ? ", assymetric pause enabled" : "");
+ else
+ printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_open(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+ int err, i;
+
+ DBG("%d: open" NL, dev->def->index);
+
+ /* Setup error IRQ handler */
+ err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to request IRQ %d\n",
+ ndev->name, dev->def->irq);
+ return err;
+ }
+
+ /* Allocate RX ring */
+ for (i = 0; i < NUM_RX_BUFF; ++i)
+ if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
+ printk(KERN_ERR "%s: failed to allocate RX ring\n",
+ ndev->name);
+ goto oom;
+ }
+
+ local_bh_disable();
+ dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
+ dev->commac.rx_stopped = 0;
+ dev->rx_sg_skb = NULL;
+
+ if (dev->phy.address >= 0) {
+ int link_poll_interval;
+ if (dev->phy.def->ops->poll_link(&dev->phy)) {
+ dev->phy.def->ops->read_link(&dev->phy);
+ EMAC_RX_CLK_DEFAULT(dev->def->index);
+ netif_carrier_on(dev->ndev);
+ link_poll_interval = PHY_POLL_LINK_ON;
+ } else {
+ EMAC_RX_CLK_TX(dev->def->index);
+ netif_carrier_off(dev->ndev);
+ link_poll_interval = PHY_POLL_LINK_OFF;
+ }
+ mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+ emac_print_link_status(dev);
+ } else
+ netif_carrier_on(dev->ndev);
+
+ emac_configure(dev);
+ mal_poll_add(dev->mal, &dev->commac);
+ mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_tx_enable(dev);
+ emac_rx_enable(dev);
+ netif_start_queue(ndev);
+ local_bh_enable();
+
+ return 0;
+ oom:
+ emac_clean_rx_ring(dev);
+ free_irq(dev->def->irq, dev);
+ return -ENOMEM;
+}
+
+/* BHs disabled */
+static int emac_link_differs(struct ocp_enet_private *dev)
+{
+ u32 r = in_be32(&dev->emacp->mr1);
+
+ int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
+ int speed, pause, asym_pause;
+
+ if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS))
+ speed = SPEED_1000;
+ else if (r & EMAC_MR1_MF_100)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
+ case (EMAC_MR1_EIFC | EMAC_MR1_APP):
+ pause = 1;
+ asym_pause = 0;
+ break;
+ case EMAC_MR1_APP:
+ pause = 0;
+ asym_pause = 1;
+ break;
+ default:
+ pause = asym_pause = 0;
+ }
+ return speed != dev->phy.speed || duplex != dev->phy.duplex ||
+ pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
+}
+
+/* BHs disabled */
+static void emac_link_timer(unsigned long data)
+{
+ struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
+ int link_poll_interval;
+
+ DBG2("%d: link timer" NL, dev->def->index);
+
+ if (dev->phy.def->ops->poll_link(&dev->phy)) {
+ if (!netif_carrier_ok(dev->ndev)) {
+ EMAC_RX_CLK_DEFAULT(dev->def->index);
+
+ /* Get new link parameters */
+ dev->phy.def->ops->read_link(&dev->phy);
+
+ if (dev->tah_dev || emac_link_differs(dev))
+ emac_full_tx_reset(dev->ndev);
+
+ netif_carrier_on(dev->ndev);
+ emac_print_link_status(dev);
+ }
+ link_poll_interval = PHY_POLL_LINK_ON;
+ } else {
+ if (netif_carrier_ok(dev->ndev)) {
+ EMAC_RX_CLK_TX(dev->def->index);
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
+ emac_reinitialize(dev);
+#endif
+ netif_carrier_off(dev->ndev);
+ emac_print_link_status(dev);
+ }
+
+ /* Retry reset if the previous attempt failed.
+ * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
+ * case, but I left it here because it shouldn't trigger for
+ * sane PHYs anyway.
+ */
+ if (unlikely(dev->reset_failed))
+ emac_reinitialize(dev);
+
+ link_poll_interval = PHY_POLL_LINK_OFF;
+ }
+ mod_timer(&dev->link_timer, jiffies + link_poll_interval);
+}
+
+/* BHs disabled */
+static void emac_force_link_update(struct ocp_enet_private *dev)
+{
+ netif_carrier_off(dev->ndev);
+ if (timer_pending(&dev->link_timer))
+ mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
+}
+
+/* Process ctx, rtnl_lock semaphore */
+static int emac_close(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ DBG("%d: close" NL, dev->def->index);
+
+ local_bh_disable();
+
+ if (dev->phy.address >= 0)
+ del_timer_sync(&dev->link_timer);
+
+ netif_stop_queue(ndev);
+ emac_rx_disable(dev);
+ emac_tx_disable(dev);
+ mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
+ mal_poll_del(dev->mal, &dev->commac);
+ local_bh_enable();
+
+ emac_clean_tx_ring(dev);
+ emac_clean_rx_ring(dev);
+ free_irq(dev->def->irq, dev);
+
+ return 0;
+}
+
+static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
+ struct sk_buff *skb)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+ if (skb->ip_summed == CHECKSUM_HW) {
+ ++dev->stats.tx_packets_csum;
+ return EMAC_TX_CTRL_TAH_CSUM;
+ }
+#endif
+ return 0;
+}
+
+static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
+{
+ struct emac_regs *p = dev->emacp;
+ struct net_device *ndev = dev->ndev;
+
+ /* Send the packet out */
+ out_be32(&p->tmr0, EMAC_TMR0_XMIT);
+
+ if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
+ netif_stop_queue(ndev);
+ DBG2("%d: stopped TX queue" NL, dev->def->index);
+ }
+
+ ndev->trans_start = jiffies;
+ ++dev->stats.tx_packets;
+ dev->stats.tx_bytes += len;
+
+ return 0;
+}
+
+/* BHs disabled */
+static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ unsigned int len = skb->len;
+ int slot;
+
+ u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+ MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
+
+ slot = dev->tx_slot++;
+ if (dev->tx_slot == NUM_TX_BUFF) {
+ dev->tx_slot = 0;
+ ctrl |= MAL_TX_CTRL_WRAP;
+ }
+
+ DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
+
+ dev->tx_skb[slot] = skb;
+ dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
+ DMA_TO_DEVICE);
+ dev->tx_desc[slot].data_len = (u16) len;
+ barrier();
+ dev->tx_desc[slot].ctrl = ctrl;
+
+ return emac_xmit_finish(dev, len);
+}
+
+#if defined(CONFIG_IBM_EMAC_TAH)
+static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
+ u32 pd, int len, int last, u16 base_ctrl)
+{
+ while (1) {
+ u16 ctrl = base_ctrl;
+ int chunk = min(len, MAL_MAX_TX_SIZE);
+ len -= chunk;
+
+ slot = (slot + 1) % NUM_TX_BUFF;
+
+ if (last && !len)
+ ctrl |= MAL_TX_CTRL_LAST;
+ if (slot == NUM_TX_BUFF - 1)
+ ctrl |= MAL_TX_CTRL_WRAP;
+
+ dev->tx_skb[slot] = NULL;
+ dev->tx_desc[slot].data_ptr = pd;
+ dev->tx_desc[slot].data_len = (u16) chunk;
+ dev->tx_desc[slot].ctrl = ctrl;
+ ++dev->tx_cnt;
+
+ if (!len)
+ break;
+
+ pd += chunk;
+ }
+ return slot;
+}
+
+/* BHs disabled (SG version for TAH equipped EMACs) */
+static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ int len = skb->len, chunk;
+ int slot, i;
+ u16 ctrl;
+ u32 pd;
+
+ /* This is common "fast" path */
+ if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
+ return emac_start_xmit(skb, ndev);
+
+ len -= skb->data_len;
+
+ /* Note, this is only an *estimation*, we can still run out of empty
+ * slots because of the additional fragmentation into
+ * MAL_MAX_TX_SIZE-sized chunks
+ */
+ if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
+ goto stop_queue;
+
+ ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
+ emac_tx_csum(dev, skb);
+ slot = dev->tx_slot;
+
+ /* skb data */
+ dev->tx_skb[slot] = NULL;
+ chunk = min(len, MAL_MAX_TX_SIZE);
+ dev->tx_desc[slot].data_ptr = pd =
+ dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
+ dev->tx_desc[slot].data_len = (u16) chunk;
+ len -= chunk;
+ if (unlikely(len))
+ slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
+ ctrl);
+ /* skb fragments */
+ for (i = 0; i < nr_frags; ++i) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ len = frag->size;
+
+ if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
+ goto undo_frame;
+
+ pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
+ DMA_TO_DEVICE);
+
+ slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
+ ctrl);
+ }
+
+ DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
+ dev->tx_slot, slot);
+
+ /* Attach skb to the last slot so we don't release it too early */
+ dev->tx_skb[slot] = skb;
+
+ /* Send the packet out */
+ if (dev->tx_slot == NUM_TX_BUFF - 1)
+ ctrl |= MAL_TX_CTRL_WRAP;
+ barrier();
+ dev->tx_desc[dev->tx_slot].ctrl = ctrl;
+ dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
+
+ return emac_xmit_finish(dev, skb->len);
+
+ undo_frame:
+ /* Well, too bad. Our previous estimation was overly optimistic.
+ * Undo everything.
+ */
+ while (slot != dev->tx_slot) {
+ dev->tx_desc[slot].ctrl = 0;
+ --dev->tx_cnt;
+ if (--slot < 0)
+ slot = NUM_TX_BUFF - 1;
+ }
+ ++dev->estats.tx_undo;
+
+ stop_queue:
+ netif_stop_queue(ndev);
+ DBG2("%d: stopped TX queue" NL, dev->def->index);
+ return 1;
+}
+#else
+# define emac_start_xmit_sg emac_start_xmit
+#endif /* !defined(CONFIG_IBM_EMAC_TAH) */
+
+/* BHs disabled */
+static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
+{
+ struct ibm_emac_error_stats *st = &dev->estats;
+ DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
+
+ ++st->tx_bd_errors;
+ if (ctrl & EMAC_TX_ST_BFCS)
+ ++st->tx_bd_bad_fcs;
+ if (ctrl & EMAC_TX_ST_LCS)
+ ++st->tx_bd_carrier_loss;
+ if (ctrl & EMAC_TX_ST_ED)
+ ++st->tx_bd_excessive_deferral;
+ if (ctrl & EMAC_TX_ST_EC)
+ ++st->tx_bd_excessive_collisions;
+ if (ctrl & EMAC_TX_ST_LC)
+ ++st->tx_bd_late_collision;
+ if (ctrl & EMAC_TX_ST_MC)
+ ++st->tx_bd_multple_collisions;
+ if (ctrl & EMAC_TX_ST_SC)
+ ++st->tx_bd_single_collision;
+ if (ctrl & EMAC_TX_ST_UR)
+ ++st->tx_bd_underrun;
+ if (ctrl & EMAC_TX_ST_SQE)
+ ++st->tx_bd_sqe;
+}
+
+static void emac_poll_tx(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
+ dev->ack_slot);
+
+ if (dev->tx_cnt) {
+ u16 ctrl;
+ int slot = dev->ack_slot, n = 0;
+ again:
+ ctrl = dev->tx_desc[slot].ctrl;
+ if (!(ctrl & MAL_TX_CTRL_READY)) {
+ struct sk_buff *skb = dev->tx_skb[slot];
+ ++n;
+
+ if (skb) {
+ dev_kfree_skb(skb);
+ dev->tx_skb[slot] = NULL;
+ }
+ slot = (slot + 1) % NUM_TX_BUFF;
+
+ if (unlikely(EMAC_IS_BAD_TX(ctrl)))
+ emac_parse_tx_error(dev, ctrl);
+
+ if (--dev->tx_cnt)
+ goto again;
+ }
+ if (n) {
+ dev->ack_slot = slot;
+ if (netif_queue_stopped(dev->ndev) &&
+ dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
+ netif_wake_queue(dev->ndev);
+
+ DBG2("%d: tx %d pkts" NL, dev->def->index, n);
+ }
+ }
+}
+
+static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
+ int len)
+{
+ struct sk_buff *skb = dev->rx_skb[slot];
+ DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
+
+ if (len)
+ dma_map_single(dev->ldev, skb->data - 2,
+ EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
+
+ dev->rx_desc[slot].data_len = 0;
+ barrier();
+ dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
+ (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
+}
+
+static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
+{
+ struct ibm_emac_error_stats *st = &dev->estats;
+ DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
+
+ ++st->rx_bd_errors;
+ if (ctrl & EMAC_RX_ST_OE)
+ ++st->rx_bd_overrun;
+ if (ctrl & EMAC_RX_ST_BP)
+ ++st->rx_bd_bad_packet;
+ if (ctrl & EMAC_RX_ST_RP)
+ ++st->rx_bd_runt_packet;
+ if (ctrl & EMAC_RX_ST_SE)
+ ++st->rx_bd_short_event;
+ if (ctrl & EMAC_RX_ST_AE)
+ ++st->rx_bd_alignment_error;
+ if (ctrl & EMAC_RX_ST_BFCS)
+ ++st->rx_bd_bad_fcs;
+ if (ctrl & EMAC_RX_ST_PTL)
+ ++st->rx_bd_packet_too_long;
+ if (ctrl & EMAC_RX_ST_ORE)
+ ++st->rx_bd_out_of_range;
+ if (ctrl & EMAC_RX_ST_IRE)
+ ++st->rx_bd_in_range;
+}
+
+static inline void emac_rx_csum(struct ocp_enet_private *dev,
+ struct sk_buff *skb, u16 ctrl)
+{
+#if defined(CONFIG_IBM_EMAC_TAH)
+ if (!ctrl && dev->tah_dev) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ ++dev->stats.rx_packets_csum;
+ }
+#endif
+}
+
+static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
+{
+ if (likely(dev->rx_sg_skb != NULL)) {
+ int len = dev->rx_desc[slot].data_len;
+ int tot_len = dev->rx_sg_skb->len + len;
+
+ if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
+ ++dev->estats.rx_dropped_mtu;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ } else {
+ cacheable_memcpy(dev->rx_sg_skb->tail,
+ dev->rx_skb[slot]->data, len);
+ skb_put(dev->rx_sg_skb, len);
+ emac_recycle_rx_skb(dev, slot, len);
+ return 0;
+ }
+ }
+ emac_recycle_rx_skb(dev, slot, 0);
+ return -1;
+}
+
+/* BHs disabled */
+static int emac_poll_rx(void *param, int budget)
+{
+ struct ocp_enet_private *dev = param;
+ int slot = dev->rx_slot, received = 0;
+
+ DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
+
+ again:
+ while (budget > 0) {
+ int len;
+ struct sk_buff *skb;
+ u16 ctrl = dev->rx_desc[slot].ctrl;
+
+ if (ctrl & MAL_RX_CTRL_EMPTY)
+ break;
+
+ skb = dev->rx_skb[slot];
+ barrier();
+ len = dev->rx_desc[slot].data_len;
+
+ if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
+ goto sg;
+
+ ctrl &= EMAC_BAD_RX_MASK;
+ if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+ emac_parse_rx_error(dev, ctrl);
+ ++dev->estats.rx_dropped_error;
+ emac_recycle_rx_skb(dev, slot, 0);
+ len = 0;
+ goto next;
+ }
+
+ if (len && len < EMAC_RX_COPY_THRESH) {
+ struct sk_buff *copy_skb =
+ alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
+ if (unlikely(!copy_skb))
+ goto oom;
+
+ skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
+ cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
+ len + 2);
+ emac_recycle_rx_skb(dev, slot, len);
+ skb = copy_skb;
+ } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
+ goto oom;
+
+ skb_put(skb, len);
+ push_packet:
+ skb->dev = dev->ndev;
+ skb->protocol = eth_type_trans(skb, dev->ndev);
+ emac_rx_csum(dev, skb, ctrl);
+
+ if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
+ ++dev->estats.rx_dropped_stack;
+ next:
+ ++dev->stats.rx_packets;
+ skip:
+ dev->stats.rx_bytes += len;
+ slot = (slot + 1) % NUM_RX_BUFF;
+ --budget;
+ ++received;
+ continue;
+ sg:
+ if (ctrl & MAL_RX_CTRL_FIRST) {
+ BUG_ON(dev->rx_sg_skb);
+ if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
+ DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+ ++dev->estats.rx_dropped_oom;
+ emac_recycle_rx_skb(dev, slot, 0);
+ } else {
+ dev->rx_sg_skb = skb;
+ skb_put(skb, len);
+ }
+ } else if (!emac_rx_sg_append(dev, slot) &&
+ (ctrl & MAL_RX_CTRL_LAST)) {
+
+ skb = dev->rx_sg_skb;
+ dev->rx_sg_skb = NULL;
+
+ ctrl &= EMAC_BAD_RX_MASK;
+ if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
+ emac_parse_rx_error(dev, ctrl);
+ ++dev->estats.rx_dropped_error;
+ dev_kfree_skb(skb);
+ len = 0;
+ } else
+ goto push_packet;
+ }
+ goto skip;
+ oom:
+ DBG("%d: rx OOM %d" NL, dev->def->index, slot);
+ /* Drop the packet and recycle skb */
+ ++dev->estats.rx_dropped_oom;
+ emac_recycle_rx_skb(dev, slot, 0);
+ goto next;
+ }
+
+ if (received) {
+ DBG2("%d: rx %d BDs" NL, dev->def->index, received);
+ dev->rx_slot = slot;
+ }
+
+ if (unlikely(budget && dev->commac.rx_stopped)) {
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ barrier();
+ if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
+ DBG2("%d: rx restart" NL, dev->def->index);
+ received = 0;
+ goto again;
+ }
+
+ if (dev->rx_sg_skb) {
+ DBG2("%d: dropping partial rx packet" NL,
+ dev->def->index);
+ ++dev->estats.rx_dropped_error;
+ dev_kfree_skb(dev->rx_sg_skb);
+ dev->rx_sg_skb = NULL;
+ }
+
+ dev->commac.rx_stopped = 0;
+ mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
+ emac_rx_enable(dev);
+ dev->rx_slot = 0;
+ }
+ return received;
+}
+
+/* BHs disabled */
+static int emac_peek_rx(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
+}
+
+/* BHs disabled */
+static int emac_peek_rx_sg(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ int slot = dev->rx_slot;
+ while (1) {
+ u16 ctrl = dev->rx_desc[slot].ctrl;
+ if (ctrl & MAL_RX_CTRL_EMPTY)
+ return 0;
+ else if (ctrl & MAL_RX_CTRL_LAST)
+ return 1;
+
+ slot = (slot + 1) % NUM_RX_BUFF;
+
+ /* I'm just being paranoid here :) */
+ if (unlikely(slot == dev->rx_slot))
+ return 0;
+ }
+}
+
+/* Hard IRQ */
+static void emac_rxde(void *param)
+{
+ struct ocp_enet_private *dev = param;
+ ++dev->estats.rx_stopped;
+ emac_rx_disable_async(dev);
+}
+
+/* Hard IRQ */
+static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ocp_enet_private *dev = dev_instance;
+ struct emac_regs *p = dev->emacp;
+ struct ibm_emac_error_stats *st = &dev->estats;
+
+ u32 isr = in_be32(&p->isr);
+ out_be32(&p->isr, isr);
+
+ DBG("%d: isr = %08x" NL, dev->def->index, isr);
+
+ if (isr & EMAC_ISR_TXPE)
+ ++st->tx_parity;
+ if (isr & EMAC_ISR_RXPE)
+ ++st->rx_parity;
+ if (isr & EMAC_ISR_TXUE)
+ ++st->tx_underrun;
+ if (isr & EMAC_ISR_RXOE)
+ ++st->rx_fifo_overrun;
+ if (isr & EMAC_ISR_OVR)
+ ++st->rx_overrun;
+ if (isr & EMAC_ISR_BP)
+ ++st->rx_bad_packet;
+ if (isr & EMAC_ISR_RP)
+ ++st->rx_runt_packet;
+ if (isr & EMAC_ISR_SE)
+ ++st->rx_short_event;
+ if (isr & EMAC_ISR_ALE)
+ ++st->rx_alignment_error;
+ if (isr & EMAC_ISR_BFCS)
+ ++st->rx_bad_fcs;
+ if (isr & EMAC_ISR_PTLE)
+ ++st->rx_packet_too_long;
+ if (isr & EMAC_ISR_ORE)
+ ++st->rx_out_of_range;
+ if (isr & EMAC_ISR_IRE)
+ ++st->rx_in_range;
+ if (isr & EMAC_ISR_SQE)
+ ++st->tx_sqe;
+ if (isr & EMAC_ISR_TE)
+ ++st->tx_errors;
return IRQ_HANDLED;
}
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static struct net_device_stats *emac_stats(struct net_device *ndev)
{
- unsigned short ctrl;
- unsigned long flags;
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- int len = skb->len;
- unsigned int offset = 0, size, f, tx_slot_first;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ struct ocp_enet_private *dev = ndev->priv;
+ struct ibm_emac_stats *st = &dev->stats;
+ struct ibm_emac_error_stats *est = &dev->estats;
+ struct net_device_stats *nst = &dev->nstats;
- spin_lock_irqsave(&fep->lock, flags);
+ DBG2("%d: stats" NL, dev->def->index);
- len -= skb->data_len;
+ /* Compute "legacy" statistics */
+ local_irq_disable();
+ nst->rx_packets = (unsigned long)st->rx_packets;
+ nst->rx_bytes = (unsigned long)st->rx_bytes;
+ nst->tx_packets = (unsigned long)st->tx_packets;
+ nst->tx_bytes = (unsigned long)st->tx_bytes;
+ nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
+ est->rx_dropped_error +
+ est->rx_dropped_resize +
+ est->rx_dropped_mtu);
+ nst->tx_dropped = (unsigned long)est->tx_dropped;
- if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) {
- PKT_DEBUG(("emac_start_xmit() stopping queue\n"));
- netif_stop_queue(dev);
- spin_unlock_irqrestore(&fep->lock, flags);
- return -EBUSY;
- }
+ nst->rx_errors = (unsigned long)est->rx_bd_errors;
+ nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
+ est->rx_fifo_overrun +
+ est->rx_overrun);
+ nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
+ est->rx_alignment_error);
+ nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
+ est->rx_bad_fcs);
+ nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
+ est->rx_bd_short_event +
+ est->rx_bd_packet_too_long +
+ est->rx_bd_out_of_range +
+ est->rx_bd_in_range +
+ est->rx_runt_packet +
+ est->rx_short_event +
+ est->rx_packet_too_long +
+ est->rx_out_of_range +
+ est->rx_in_range);
- tx_slot_first = fep->tx_slot;
-
- while (len) {
- size = min(len, DESC_BUF_SIZE);
-
- fep->tx_desc[fep->tx_slot].data_len = (short)size;
- fep->tx_desc[fep->tx_slot].data_ptr =
- (unsigned char *)dma_map_single(&fep->ocpdev->dev,
- (void *)((unsigned int)skb->
- data + offset),
- size, DMA_TO_DEVICE);
-
- ctrl = EMAC_TX_CTRL_DFLT;
- if (fep->tx_slot != tx_slot_first)
- ctrl |= MAL_TX_CTRL_READY;
- if ((NUM_TX_BUFF - 1) == fep->tx_slot)
- ctrl |= MAL_TX_CTRL_WRAP;
- if (!nr_frags && (len == size)) {
- ctrl |= MAL_TX_CTRL_LAST;
- fep->tx_skb[fep->tx_slot] = skb;
- }
- if (skb->ip_summed == CHECKSUM_HW)
- ctrl |= EMAC_TX_CTRL_TAH_CSUM;
-
- fep->tx_desc[fep->tx_slot].ctrl = ctrl;
-
- len -= size;
- offset += size;
-
- /* Bump tx count */
- if (++fep->tx_cnt == NUM_TX_BUFF)
- netif_stop_queue(dev);
-
- /* Next descriptor */
- if (++fep->tx_slot == NUM_TX_BUFF)
- fep->tx_slot = 0;
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
- offset = 0;
-
- while (len) {
- size = min(len, DESC_BUF_SIZE);
-
- dma_map_page(&fep->ocpdev->dev,
- frag->page,
- frag->page_offset + offset,
- size, DMA_TO_DEVICE);
-
- ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY;
- if ((NUM_TX_BUFF - 1) == fep->tx_slot)
- ctrl |= MAL_TX_CTRL_WRAP;
- if ((f == (nr_frags - 1)) && (len == size)) {
- ctrl |= MAL_TX_CTRL_LAST;
- fep->tx_skb[fep->tx_slot] = skb;
- }
-
- if (skb->ip_summed == CHECKSUM_HW)
- ctrl |= EMAC_TX_CTRL_TAH_CSUM;
-
- fep->tx_desc[fep->tx_slot].data_len = (short)size;
- fep->tx_desc[fep->tx_slot].data_ptr =
- (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) +
- frag->page_offset + offset);
- fep->tx_desc[fep->tx_slot].ctrl = ctrl;
-
- len -= size;
- offset += size;
-
- /* Bump tx count */
- if (++fep->tx_cnt == NUM_TX_BUFF)
- netif_stop_queue(dev);
-
- /* Next descriptor */
- if (++fep->tx_slot == NUM_TX_BUFF)
- fep->tx_slot = 0;
- }
- }
-
- /*
- * Deferred set READY on first descriptor of packet to
- * avoid TX MAL race.
- */
- fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY;
-
- /* Send the packet out. */
- out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT);
-
- fep->stats.tx_packets++;
- fep->stats.tx_bytes += skb->len;
-
- PKT_DEBUG(("emac_start_xmit() exitn"));
-
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return 0;
+ nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
+ nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
+ est->tx_underrun);
+ nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
+ nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
+ est->tx_bd_excessive_collisions +
+ est->tx_bd_late_collision +
+ est->tx_bd_multple_collisions);
+ local_irq_enable();
+ return nst;
}
-static int emac_adjust_to_link(struct ocp_enet_private *fep)
+static void emac_remove(struct ocp_device *ocpdev)
{
- emac_t *emacp = fep->emacp;
- unsigned long mode_reg;
- int full_duplex, speed;
+ struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
- full_duplex = 0;
- speed = SPEED_10;
+ DBG("%d: remove" NL, dev->def->index);
- /* set mode register 1 defaults */
- mode_reg = EMAC_M1_DEFAULT;
+ ocp_set_drvdata(ocpdev, 0);
+ unregister_netdev(dev->ndev);
- /* Read link mode on PHY */
- if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) {
- /* If an error occurred, we don't deal with it yet */
- full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL);
- speed = fep->phy_mii.speed;
- }
+ tah_fini(dev->tah_dev);
+ rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+ zmii_fini(dev->zmii_dev, dev->zmii_input);
+ emac_dbg_register(dev->def->index, 0);
- /* set speed (default is 10Mb) */
- switch (speed) {
- case SPEED_1000:
- mode_reg |= EMAC_M1_RFS_16K;
- if (fep->rgmii_dev) {
- struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev);
-
- if ((rgmii->mode[fep->rgmii_input] == RTBI)
- || (rgmii->mode[fep->rgmii_input] == TBI))
- mode_reg |= EMAC_M1_MF_1000GPCS;
- else
- mode_reg |= EMAC_M1_MF_1000MBPS;
-
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 1000);
- }
- break;
- case SPEED_100:
- mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K;
- if (fep->rgmii_dev)
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 100);
- if (fep->zmii_dev)
- emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
- 100);
- break;
- case SPEED_10:
- default:
- mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K;
- if (fep->rgmii_dev)
- emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input,
- 10);
- if (fep->zmii_dev)
- emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input,
- 10);
- }
-
- if (full_duplex)
- mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST;
- else
- mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE);
-
- LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n",
- fep->ndev->name, speed, full_duplex, fep->opened));
-
- printk(KERN_INFO "%s: Speed: %d, %s duplex.\n",
- fep->ndev->name, speed, full_duplex ? "Full" : "Half");
- if (fep->opened)
- out_be32(&emacp->em0mr1, mode_reg);
-
- return 0;
+ mal_unregister_commac(dev->mal, &dev->commac);
+ iounmap((void *)dev->emacp);
+ kfree(dev->ndev);
}
-static int emac_set_mac_address(struct net_device *ndev, void *p)
+static struct mal_commac_ops emac_commac_ops = {
+ .poll_tx = &emac_poll_tx,
+ .poll_rx = &emac_poll_rx,
+ .peek_rx = &emac_peek_rx,
+ .rxde = &emac_rxde,
+};
+
+static struct mal_commac_ops emac_commac_sg_ops = {
+ .poll_tx = &emac_poll_tx,
+ .poll_rx = &emac_poll_rx,
+ .peek_rx = &emac_peek_rx_sg,
+ .rxde = &emac_rxde,
+};
+
+/* Ethtool support */
+static int emac_ethtool_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
{
- struct ocp_enet_private *fep = ndev->priv;
- emac_t *emacp = fep->emacp;
- struct sockaddr *addr = p;
+ struct ocp_enet_private *dev = ndev->priv;
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
-
- /* set the high address */
- out_be32(&emacp->em0iahr,
- (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
-
- /* set the low address */
- out_be32(&emacp->em0ialr,
- (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
- | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
-
- return 0;
-}
-
-static int emac_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ocp_enet_private *fep = dev->priv;
- int old_mtu = dev->mtu;
- unsigned long mode_reg;
- emac_t *emacp = fep->emacp;
- u32 em0mr0;
- int i, full;
- unsigned long flags;
-
- if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) {
- printk(KERN_ERR
- "emac: Invalid MTU setting, MTU must be between %d and %d\n",
- EMAC_MIN_MTU, EMAC_MAX_MTU);
- return -EINVAL;
- }
-
- if (old_mtu != new_mtu && netif_running(dev)) {
- /* Stop rx engine */
- em0mr0 = in_be32(&emacp->em0mr0);
- out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE);
-
- /* Wait for descriptors to be empty */
- do {
- full = 0;
- for (i = 0; i < NUM_RX_BUFF; i++)
- if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) {
- printk(KERN_NOTICE
- "emac: RX ring is still full\n");
- full = 1;
- }
- } while (full);
-
- spin_lock_irqsave(&fep->lock, flags);
-
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /* Destroy all old rx skbs */
- for (i = 0; i < NUM_RX_BUFF; i++) {
- dma_unmap_single(&fep->ocpdev->dev,
- fep->rx_desc[i].data_ptr,
- fep->rx_desc[i].data_len,
- DMA_FROM_DEVICE);
- dev_kfree_skb(fep->rx_skb[i]);
- fep->rx_skb[i] = NULL;
- }
-
- /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */
- mode_reg = in_be32(&emacp->em0mr1);
- if (new_mtu > ENET_DEF_MTU_SIZE) {
- mode_reg |= EMAC_M1_JUMBO_ENABLE;
- fep->rx_buffer_size = EMAC_MAX_FRAME;
- } else {
- mode_reg &= ~EMAC_M1_JUMBO_ENABLE;
- fep->rx_buffer_size = ENET_DEF_BUF_SIZE;
- }
- dev->mtu = new_mtu;
- out_be32(&emacp->em0mr1, mode_reg);
-
- /* Re-init rx skbs */
- fep->rx_slot = 0;
- emac_rx_fill(dev, 0);
-
- /* Restart the rx engine */
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE);
-
- spin_unlock_irqrestore(&fep->lock, flags);
- }
-
- return 0;
-}
-
-static void __emac_set_multicast_list(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
- u32 rmr = in_be32(&emacp->em0rmr);
-
- /* First clear all special bits, they can be set later */
- rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE);
-
- if (dev->flags & IFF_PROMISC) {
- rmr |= EMAC_RMR_PME;
- } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) {
- /*
- * Must be setting up to use multicast
- * Now check for promiscuous multicast
- */
- rmr |= EMAC_RMR_PMME;
- } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) {
- unsigned short em0gaht[4] = { 0, 0, 0, 0 };
- struct dev_mc_list *dmi;
-
- /* Need to hash on the multicast address. */
- for (dmi = dev->mc_list; dmi; dmi = dmi->next) {
- unsigned long mc_crc;
- unsigned int bit_number;
-
- mc_crc = ether_crc(6, (char *)dmi->dmi_addr);
- bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */
- em0gaht[bit_number >> 4] |=
- 0x8000 >> (bit_number & 0x0f);
- }
- emacp->em0gaht1 = em0gaht[0];
- emacp->em0gaht2 = em0gaht[1];
- emacp->em0gaht3 = em0gaht[2];
- emacp->em0gaht4 = em0gaht[3];
-
- /* Turn on multicast addressing */
- rmr |= EMAC_RMR_MAE;
- }
- out_be32(&emacp->em0rmr, rmr);
-}
-
-static int emac_init_tah(struct ocp_enet_private *fep)
-{
- tah_t *tahp;
-
- /* Initialize TAH and enable checksum verification */
- tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp));
-
- if (tahp == NULL) {
- printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n",
- fep->tah_dev->def->index);
-
- return -ENOMEM;
- }
-
- out_be32(&tahp->tah_mr, TAH_MR_SR);
-
- /* wait for reset to complete */
- while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ;
-
- /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
- out_be32(&tahp->tah_mr,
- TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
- TAH_MR_DIG);
-
- iounmap(tahp);
-
- return 0;
-}
-
-static void emac_init_rings(struct net_device *dev)
-{
- struct ocp_enet_private *ep = dev->priv;
- int loop;
-
- ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr +
- (ep->mal_tx_chan *
- MAL_DT_ALIGN));
- ep->rx_desc =
- (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr +
- (ep->mal_rx_chan * MAL_DT_ALIGN));
-
- /* Fill in the transmit descriptor ring. */
- for (loop = 0; loop < NUM_TX_BUFF; loop++) {
- if (ep->tx_skb[loop]) {
- dma_unmap_single(&ep->ocpdev->dev,
- ep->tx_desc[loop].data_ptr,
- ep->tx_desc[loop].data_len,
- DMA_TO_DEVICE);
- dev_kfree_skb_irq(ep->tx_skb[loop]);
- }
- ep->tx_skb[loop] = NULL;
- ep->tx_desc[loop].ctrl = 0;
- ep->tx_desc[loop].data_len = 0;
- ep->tx_desc[loop].data_ptr = NULL;
- }
- ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP;
-
- /* Format the receive descriptor ring. */
- ep->rx_slot = 0;
- /* Default is MTU=1500 + Ethernet overhead */
- ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE;
- emac_rx_fill(dev, 0);
- if (ep->rx_slot != 0) {
- printk(KERN_ERR
- "%s: Not enough mem for RxChain durning Open?\n",
- dev->name);
- /*We couldn't fill the ring at startup?
- *We could clean up and fail to open but right now we will try to
- *carry on. It may be a sign of a bad NUM_RX_BUFF value
- */
- }
-
- ep->tx_cnt = 0;
- ep->tx_slot = 0;
- ep->ack_slot = 0;
-}
-
-static void emac_reset_configure(struct ocp_enet_private *fep)
-{
- emac_t *emacp = fep->emacp;
- int i;
-
- mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /*
- * Check for a link, some PHYs don't provide a clock if
- * no link is present. Some EMACs will not come out of
- * soft reset without a PHY clock present.
- */
- if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
- /* Reset the EMAC */
- out_be32(&emacp->em0mr0, EMAC_M0_SRST);
- udelay(20);
- for (i = 0; i < 100; i++) {
- if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0)
- break;
- udelay(10);
- }
-
- if (i >= 100) {
- printk(KERN_ERR "%s: Cannot reset EMAC\n",
- fep->ndev->name);
- return;
- }
- }
-
- /* Switch IRQs off for now */
- out_be32(&emacp->em0iser, 0);
-
- /* Configure MAL rx channel */
- mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG);
-
- /* set the high address */
- out_be32(&emacp->em0iahr,
- (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]);
-
- /* set the low address */
- out_be32(&emacp->em0ialr,
- (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16)
- | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]);
-
- /* Adjust to link */
- if (netif_carrier_ok(fep->ndev))
- emac_adjust_to_link(fep);
-
- /* enable broadcast/individual address and RX FIFO defaults */
- out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT);
-
- /* set transmit request threshold register */
- out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT);
-
- /* Reconfigure multicast */
- __emac_set_multicast_list(fep->ndev);
-
- /* Set receiver/transmitter defaults */
- out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT);
- out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT);
- out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT);
-
- /* set frame gap */
- out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP);
-
- /* set VLAN Tag Protocol Identifier */
- out_be32(&emacp->em0vtpid, 0x8100);
-
- /* Init ring buffers */
- emac_init_rings(fep->ndev);
-}
-
-static void emac_kick(struct ocp_enet_private *fep)
-{
- emac_t *emacp = fep->emacp;
- unsigned long emac_ier;
-
- emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP |
- EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE |
- EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
-
- out_be32(&emacp->em0iser, emac_ier);
-
- /* enable all MAL transmit and receive channels */
- mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
-
- /* set transmit and receive enable */
- out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE);
-}
-
-static void
-emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep)
-{
- u32 advertise;
- int autoneg;
- int forced_speed;
- int forced_duplex;
-
- /* Default advertise */
- advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full;
- autoneg = fep->want_autoneg;
- forced_speed = fep->phy_mii.speed;
- forced_duplex = fep->phy_mii.duplex;
-
- /* Setup link parameters */
- if (ep) {
- if (ep->autoneg == AUTONEG_ENABLE) {
- advertise = ep->advertising;
- autoneg = 1;
- } else {
- autoneg = 0;
- forced_speed = ep->speed;
- forced_duplex = ep->duplex;
- }
- }
-
- /* Configure PHY & start aneg */
- fep->want_autoneg = autoneg;
- if (autoneg) {
- LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n",
- fep->ndev->name, advertise));
- fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise);
- } else {
- LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n",
- fep->ndev->name, forced_speed, forced_duplex));
- fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed,
- forced_duplex);
- }
- fep->timer_ticks = 0;
- mod_timer(&fep->link_timer, jiffies + HZ);
-}
-
-static void emac_link_timer(unsigned long data)
-{
- struct ocp_enet_private *fep = (struct ocp_enet_private *)data;
- int link;
-
- if (fep->going_away)
- return;
-
- spin_lock_irq(&fep->lock);
-
- link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii);
- LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link));
-
- if (link == netif_carrier_ok(fep->ndev)) {
- if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10)
- emac_start_link(fep, NULL);
- goto out;
- }
- printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name,
- link ? "Up" : "Down");
- if (link) {
- netif_carrier_on(fep->ndev);
- /* Chip needs a full reset on config change. That sucks, so I
- * should ultimately move that to some tasklet to limit
- * latency peaks caused by this code
- */
- emac_reset_configure(fep);
- if (fep->opened)
- emac_kick(fep);
- } else {
- fep->timer_ticks = 0;
- netif_carrier_off(fep->ndev);
- }
- out:
- mod_timer(&fep->link_timer, jiffies + HZ);
- spin_unlock_irq(&fep->lock);
-}
-
-static void emac_set_multicast_list(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
-
- spin_lock_irq(&fep->lock);
- __emac_set_multicast_list(dev);
- spin_unlock_irq(&fep->lock);
-}
-
-static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
-{
- struct ocp_enet_private *fep = ndev->priv;
-
- cmd->supported = fep->phy_mii.def->features;
+ cmd->supported = dev->phy.features;
cmd->port = PORT_MII;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->phy_address = fep->mii_phy_addr;
- spin_lock_irq(&fep->lock);
- cmd->autoneg = fep->want_autoneg;
- cmd->speed = fep->phy_mii.speed;
- cmd->duplex = fep->phy_mii.duplex;
- spin_unlock_irq(&fep->lock);
+ cmd->phy_address = dev->phy.address;
+ cmd->transceiver =
+ dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
+
+ local_bh_disable();
+ cmd->advertising = dev->phy.advertising;
+ cmd->autoneg = dev->phy.autoneg;
+ cmd->speed = dev->phy.speed;
+ cmd->duplex = dev->phy.duplex;
+ local_bh_enable();
+
return 0;
}
-static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+static int emac_ethtool_set_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
{
- struct ocp_enet_private *fep = ndev->priv;
- unsigned long features = fep->phy_mii.def->features;
+ struct ocp_enet_private *dev = ndev->priv;
+ u32 f = dev->phy.features;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
+ cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
+ /* Basic sanity checks */
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
return -EINVAL;
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
return -EINVAL;
- if (cmd->autoneg == AUTONEG_DISABLE)
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
switch (cmd->speed) {
case SPEED_10:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_10baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_10baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_10baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_10baseT_Full))
return -EINVAL;
break;
case SPEED_100:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_100baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_100baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_100baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_100baseT_Full))
return -EINVAL;
break;
case SPEED_1000:
- if (cmd->duplex == DUPLEX_HALF &&
- (features & SUPPORTED_1000baseT_Half) == 0)
+ if (cmd->duplex == DUPLEX_HALF
+ && !(f & SUPPORTED_1000baseT_Half))
return -EINVAL;
- if (cmd->duplex == DUPLEX_FULL &&
- (features & SUPPORTED_1000baseT_Full) == 0)
+ if (cmd->duplex == DUPLEX_FULL
+ && !(f & SUPPORTED_1000baseT_Full))
return -EINVAL;
break;
default:
return -EINVAL;
- } else if ((features & SUPPORTED_Autoneg) == 0)
- return -EINVAL;
- spin_lock_irq(&fep->lock);
- emac_start_link(fep, cmd);
- spin_unlock_irq(&fep->lock);
+ }
+
+ local_bh_disable();
+ dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
+ cmd->duplex);
+
+ } else {
+ if (!(f & SUPPORTED_Autoneg))
+ return -EINVAL;
+
+ local_bh_disable();
+ dev->phy.def->ops->setup_aneg(&dev->phy,
+ (cmd->advertising & f) |
+ (dev->phy.advertising &
+ (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause)));
+ }
+ emac_force_link_update(dev);
+ local_bh_enable();
+
return 0;
}
-static void
-emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
+static void emac_ethtool_get_ringparam(struct net_device *ndev,
+ struct ethtool_ringparam *rp)
{
- struct ocp_enet_private *fep = ndev->priv;
+ rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
+ rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
+}
- strcpy(info->driver, DRV_NAME);
+static void emac_ethtool_get_pauseparam(struct net_device *ndev,
+ struct ethtool_pauseparam *pp)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ local_bh_disable();
+ if ((dev->phy.features & SUPPORTED_Autoneg) &&
+ (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
+ pp->autoneg = 1;
+
+ if (dev->phy.duplex == DUPLEX_FULL) {
+ if (dev->phy.pause)
+ pp->rx_pause = pp->tx_pause = 1;
+ else if (dev->phy.asym_pause)
+ pp->tx_pause = 1;
+ }
+ local_bh_enable();
+}
+
+static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ return dev->tah_dev != 0;
+}
+
+static int emac_get_regs_len(struct ocp_enet_private *dev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
+}
+
+static int emac_ethtool_get_regs_len(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ return sizeof(struct emac_ethtool_regs_hdr) +
+ emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
+ zmii_get_regs_len(dev->zmii_dev) +
+ rgmii_get_regs_len(dev->rgmii_dev) +
+ tah_get_regs_len(dev->tah_dev);
+}
+
+static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
+{
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+
+ hdr->version = EMAC_ETHTOOL_REGS_VER;
+ hdr->index = dev->def->index;
+ memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
+ return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
+}
+
+static void emac_ethtool_get_regs(struct net_device *ndev,
+ struct ethtool_regs *regs, void *buf)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ struct emac_ethtool_regs_hdr *hdr = buf;
+
+ hdr->components = 0;
+ buf = hdr + 1;
+
+ local_irq_disable();
+ buf = mal_dump_regs(dev->mal, buf);
+ buf = emac_dump_regs(dev, buf);
+ if (dev->zmii_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
+ buf = zmii_dump_regs(dev->zmii_dev, buf);
+ }
+ if (dev->rgmii_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
+ buf = rgmii_dump_regs(dev->rgmii_dev, buf);
+ }
+ if (dev->tah_dev) {
+ hdr->components |= EMAC_ETHTOOL_REGS_TAH;
+ buf = tah_dump_regs(dev->tah_dev, buf);
+ }
+ local_irq_enable();
+}
+
+static int emac_ethtool_nway_reset(struct net_device *ndev)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ int res = 0;
+
+ DBG("%d: nway_reset" NL, dev->def->index);
+
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
+
+ local_bh_disable();
+ if (!dev->phy.autoneg) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
+ emac_force_link_update(dev);
+
+ out:
+ local_bh_enable();
+ return res;
+}
+
+static int emac_ethtool_get_stats_count(struct net_device *ndev)
+{
+ return EMAC_ETHTOOL_STATS_COUNT;
+}
+
+static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
+ u8 * buf)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
+}
+
+static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
+ struct ethtool_stats *estats,
+ u64 * tmp_stats)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+ local_irq_disable();
+ memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
+ tmp_stats += sizeof(dev->stats) / sizeof(u64);
+ memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
+ local_irq_enable();
+}
+
+static void emac_ethtool_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+{
+ struct ocp_enet_private *dev = ndev->priv;
+
+ strcpy(info->driver, "ibm_emac");
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
- sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index);
- info->regdump_len = 0;
-}
-
-static int emac_nway_reset(struct net_device *ndev)
-{
- struct ocp_enet_private *fep = ndev->priv;
-
- if (!fep->want_autoneg)
- return -EINVAL;
- spin_lock_irq(&fep->lock);
- emac_start_link(fep, NULL);
- spin_unlock_irq(&fep->lock);
- return 0;
-}
-
-static u32 emac_get_link(struct net_device *ndev)
-{
- return netif_carrier_ok(ndev);
+ sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
+ info->n_stats = emac_ethtool_get_stats_count(ndev);
+ info->regdump_len = emac_ethtool_get_regs_len(ndev);
}
static struct ethtool_ops emac_ethtool_ops = {
- .get_settings = emac_get_settings,
- .set_settings = emac_set_settings,
- .get_drvinfo = emac_get_drvinfo,
- .nway_reset = emac_nway_reset,
- .get_link = emac_get_link
+ .get_settings = emac_ethtool_get_settings,
+ .set_settings = emac_ethtool_set_settings,
+ .get_drvinfo = emac_ethtool_get_drvinfo,
+
+ .get_regs_len = emac_ethtool_get_regs_len,
+ .get_regs = emac_ethtool_get_regs,
+
+ .nway_reset = emac_ethtool_nway_reset,
+
+ .get_ringparam = emac_ethtool_get_ringparam,
+ .get_pauseparam = emac_ethtool_get_pauseparam,
+
+ .get_rx_csum = emac_ethtool_get_rx_csum,
+
+ .get_strings = emac_ethtool_get_strings,
+ .get_stats_count = emac_ethtool_get_stats_count,
+ .get_ethtool_stats = emac_ethtool_get_ethtool_stats,
+
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
};
-static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
- struct ocp_enet_private *fep = dev->priv;
+ struct ocp_enet_private *dev = ndev->priv;
uint16_t *data = (uint16_t *) & rq->ifr_ifru;
+ DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
+
+ if (dev->phy.address < 0)
+ return -EOPNOTSUPP;
+
switch (cmd) {
case SIOCGMIIPHY:
- data[0] = fep->mii_phy_addr;
+ case SIOCDEVPRIVATE:
+ data[0] = dev->phy.address;
/* Fall through */
case SIOCGMIIREG:
- data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]);
+ case SIOCDEVPRIVATE + 1:
+ data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
return 0;
+
case SIOCSMIIREG:
+ case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
-
- emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]);
+ emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
return 0;
default:
return -EOPNOTSUPP;
}
}
-static int emac_open(struct net_device *dev)
+static int __init emac_probe(struct ocp_device *ocpdev)
{
- struct ocp_enet_private *fep = dev->priv;
- int rc;
-
- spin_lock_irq(&fep->lock);
-
- fep->opened = 1;
- netif_carrier_off(dev);
-
- /* Reset & configure the chip */
- emac_reset_configure(fep);
-
- spin_unlock_irq(&fep->lock);
-
- /* Request our interrupt lines */
- rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev);
- if (rc != 0) {
- printk("dev->irq %d failed\n", dev->irq);
- goto bail;
- }
- /* Kick the chip rx & tx channels into life */
- spin_lock_irq(&fep->lock);
- emac_kick(fep);
- spin_unlock_irq(&fep->lock);
-
- netif_start_queue(dev);
- bail:
- return rc;
-}
-
-static int emac_close(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- emac_t *emacp = fep->emacp;
-
- /* XXX Stop IRQ emitting here */
- spin_lock_irq(&fep->lock);
- fep->opened = 0;
- mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask);
- mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask);
- netif_carrier_off(dev);
- netif_stop_queue(dev);
-
- /*
- * Check for a link, some PHYs don't provide a clock if
- * no link is present. Some EMACs will not come out of
- * soft reset without a PHY clock present.
- */
- if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) {
- out_be32(&emacp->em0mr0, EMAC_M0_SRST);
- udelay(10);
-
- if (emacp->em0mr0 & EMAC_M0_SRST) {
- /*not sure what to do here hopefully it clears before another open */
- printk(KERN_ERR
- "%s: Phy SoftReset didn't clear, no link?\n",
- dev->name);
- }
- }
-
- /* Free the irq's */
- free_irq(dev->irq, dev);
-
- spin_unlock_irq(&fep->lock);
-
- return 0;
-}
-
-static void emac_remove(struct ocp_device *ocpdev)
-{
- struct net_device *dev = ocp_get_drvdata(ocpdev);
- struct ocp_enet_private *ep = dev->priv;
-
- /* FIXME: locking, races, ... */
- ep->going_away = 1;
- ocp_set_drvdata(ocpdev, NULL);
- if (ep->rgmii_dev)
- emac_close_rgmii(ep->rgmii_dev);
- if (ep->zmii_dev)
- emac_close_zmii(ep->zmii_dev);
-
- unregister_netdev(dev);
- del_timer_sync(&ep->link_timer);
- mal_unregister_commac(ep->mal, &ep->commac);
- iounmap((void *)ep->emacp);
- kfree(dev);
-}
-
-struct mal_commac_ops emac_commac_ops = {
- .txeob = &emac_txeob_dev,
- .txde = &emac_txde_dev,
- .rxeob = &emac_rxeob_dev,
- .rxde = &emac_rxde_dev,
-};
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void emac_netpoll(struct net_device *ndev)
-{
- emac_rxeob_dev((void *)ndev, 0);
- emac_txeob_dev((void *)ndev, 0);
-}
-#endif
-
-static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal)
-{
- int deferred_init = 0;
- int rc = 0, i;
+ struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
struct net_device *ndev;
- struct ocp_enet_private *ep;
- struct ocp_func_emac_data *emacdata;
- int commac_reg = 0;
- u32 phy_map;
+ struct ocp_device *maldev;
+ struct ocp_enet_private *dev;
+ int err, i;
- emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
+ DBG("%d: probe" NL, ocpdev->def->index);
+
if (!emacdata) {
printk(KERN_ERR "emac%d: Missing additional data!\n",
ocpdev->def->index);
@@ -1738,304 +1936,312 @@
/* Allocate our net_device structure */
ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
- if (ndev == NULL) {
- printk(KERN_ERR
- "emac%d: Could not allocate ethernet device.\n",
+ if (!ndev) {
+ printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
ocpdev->def->index);
return -ENOMEM;
}
- ep = ndev->priv;
- ep->ndev = ndev;
- ep->ocpdev = ocpdev;
- ndev->irq = ocpdev->def->irq;
- ep->wol_irq = emacdata->wol_irq;
- if (emacdata->mdio_idx >= 0) {
- if (emacdata->mdio_idx == ocpdev->def->index) {
- /* Set the common MDIO net_device */
- mdio_ndev = ndev;
- deferred_init = 1;
+ dev = ndev->priv;
+ dev->ndev = ndev;
+ dev->ldev = &ocpdev->dev;
+ dev->def = ocpdev->def;
+ SET_MODULE_OWNER(ndev);
+
+ /* Find MAL device we are connected to */
+ maldev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
+ if (!maldev) {
+ printk(KERN_ERR "emac%d: unknown mal%d device!\n",
+ dev->def->index, emacdata->mal_idx);
+ err = -ENODEV;
+ goto out;
+ }
+ dev->mal = ocp_get_drvdata(maldev);
+ if (!dev->mal) {
+ printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
+ dev->def->index, emacdata->mal_idx);
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* Register with MAL */
+ dev->commac.ops = &emac_commac_ops;
+ dev->commac.dev = dev;
+ dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
+ dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
+ err = mal_register_commac(dev->mal, &dev->commac);
+ if (err) {
+ printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
+ dev->def->index, emacdata->mal_idx);
+ goto out;
+ }
+ dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
+ dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
+
+ /* Get pointers to BD rings */
+ dev->tx_desc =
+ dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
+ emacdata->mal_tx_chan);
+ dev->rx_desc =
+ dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
+ emacdata->mal_rx_chan);
+
+ DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
+ DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
+
+ /* Clean rings */
+ memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
+ memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
+
+ /* If we depend on another EMAC for MDIO, check whether it was probed already */
+ if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
+ struct ocp_device *mdiodev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
+ emacdata->mdio_idx);
+ if (!mdiodev) {
+ printk(KERN_ERR "emac%d: unknown emac%d device!\n",
+ dev->def->index, emacdata->mdio_idx);
+ err = -ENODEV;
+ goto out2;
}
- ep->mdio_dev = mdio_ndev;
- } else {
- ep->mdio_dev = ndev;
- }
-
- ocp_set_drvdata(ocpdev, ndev);
-
- spin_lock_init(&ep->lock);
-
- /* Fill out MAL informations and register commac */
- ep->mal = mal;
- ep->mal_tx_chan = emacdata->mal_tx_chan;
- ep->mal_rx_chan = emacdata->mal_rx_chan;
- ep->commac.ops = &emac_commac_ops;
- ep->commac.dev = ndev;
- ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan);
- ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan);
- rc = mal_register_commac(ep->mal, &ep->commac);
- if (rc != 0)
- goto bail;
- commac_reg = 1;
-
- /* Map our MMIOs */
- ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t));
-
- /* Check if we need to attach to a ZMII */
- if (emacdata->zmii_idx >= 0) {
- ep->zmii_input = emacdata->zmii_mux;
- ep->zmii_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII,
- emacdata->zmii_idx);
- if (ep->zmii_dev == NULL)
- printk(KERN_WARNING
- "emac%d: ZMII %d requested but not found !\n",
- ocpdev->def->index, emacdata->zmii_idx);
- else if ((rc =
- emac_init_zmii(ep->zmii_dev, ep->zmii_input,
- emacdata->phy_mode)) != 0)
- goto bail;
- }
-
- /* Check if we need to attach to a RGMII */
- if (emacdata->rgmii_idx >= 0) {
- ep->rgmii_input = emacdata->rgmii_mux;
- ep->rgmii_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII,
- emacdata->rgmii_idx);
- if (ep->rgmii_dev == NULL)
- printk(KERN_WARNING
- "emac%d: RGMII %d requested but not found !\n",
- ocpdev->def->index, emacdata->rgmii_idx);
- else if ((rc =
- emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input,
- emacdata->phy_mode)) != 0)
- goto bail;
- }
-
- /* Check if we need to attach to a TAH */
- if (emacdata->tah_idx >= 0) {
- ep->tah_dev =
- ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
- emacdata->tah_idx);
- if (ep->tah_dev == NULL)
- printk(KERN_WARNING
- "emac%d: TAH %d requested but not found !\n",
- ocpdev->def->index, emacdata->tah_idx);
- else if ((rc = emac_init_tah(ep)) != 0)
- goto bail;
- }
-
- if (deferred_init) {
- if (!list_empty(&emac_init_list)) {
- struct list_head *entry;
- struct emac_def_dev *ddev;
-
- list_for_each(entry, &emac_init_list) {
- ddev =
- list_entry(entry, struct emac_def_dev,
- link);
- emac_init_device(ddev->ocpdev, ddev->mal);
- }
+ dev->mdio_dev = ocp_get_drvdata(mdiodev);
+ if (!dev->mdio_dev) {
+ printk(KERN_ERR
+ "emac%d: emac%d hasn't been initialized yet!\n",
+ dev->def->index, emacdata->mdio_idx);
+ err = -ENODEV;
+ goto out2;
}
}
- /* Init link monitoring timer */
- init_timer(&ep->link_timer);
- ep->link_timer.function = emac_link_timer;
- ep->link_timer.data = (unsigned long)ep;
- ep->timer_ticks = 0;
+ /* Attach to ZMII, if needed */
+ if ((err = zmii_attach(dev)) != 0)
+ goto out2;
- /* Fill up the mii_phy structure */
- ep->phy_mii.dev = ndev;
- ep->phy_mii.mdio_read = emac_phy_read;
- ep->phy_mii.mdio_write = emac_phy_write;
- ep->phy_mii.mode = emacdata->phy_mode;
+ /* Attach to RGMII, if needed */
+ if ((err = rgmii_attach(dev)) != 0)
+ goto out3;
- /* Find PHY */
- phy_map = emacdata->phy_map | busy_phy_map;
- for (i = 0; i <= 0x1f; i++, phy_map >>= 1) {
- if ((phy_map & 0x1) == 0) {
- int val = emac_phy_read(ndev, i, MII_BMCR);
- if (val != 0xffff && val != -1)
- break;
- }
- }
- if (i == 0x20) {
- printk(KERN_WARNING "emac%d: Can't find PHY.\n",
- ocpdev->def->index);
- rc = -ENODEV;
- goto bail;
- }
- busy_phy_map |= 1 << i;
- ep->mii_phy_addr = i;
- rc = mii_phy_probe(&ep->phy_mii, i);
- if (rc) {
- printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n",
- ocpdev->def->index);
- rc = -ENODEV;
- goto bail;
- }
-
- /* Disable any PHY features not supported by the platform */
- ep->phy_mii.def->features &= ~emacdata->phy_feat_exc;
+ /* Attach to TAH, if needed */
+ if ((err = tah_attach(dev)) != 0)
+ goto out4;
- /* Setup initial PHY config & startup aneg */
- if (ep->phy_mii.def->ops->init)
- ep->phy_mii.def->ops->init(&ep->phy_mii);
- netif_carrier_off(ndev);
- if (ep->phy_mii.def->features & SUPPORTED_Autoneg)
- ep->want_autoneg = 1;
- else {
- ep->want_autoneg = 0;
-
- /* Select highest supported speed/duplex */
- if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) {
- ep->phy_mii.speed = SPEED_1000;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_1000baseT_Half) {
- ep->phy_mii.speed = SPEED_1000;
- ep->phy_mii.duplex = DUPLEX_HALF;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_100baseT_Full) {
- ep->phy_mii.speed = SPEED_100;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_100baseT_Half) {
- ep->phy_mii.speed = SPEED_100;
- ep->phy_mii.duplex = DUPLEX_HALF;
- } else if (ep->phy_mii.def->features &
- SUPPORTED_10baseT_Full) {
- ep->phy_mii.speed = SPEED_10;
- ep->phy_mii.duplex = DUPLEX_FULL;
- } else {
- ep->phy_mii.speed = SPEED_10;
- ep->phy_mii.duplex = DUPLEX_HALF;
- }
+ /* Map EMAC regs */
+ dev->emacp =
+ (struct emac_regs *)ioremap(dev->def->paddr,
+ sizeof(struct emac_regs));
+ if (!dev->emacp) {
+ printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
+ dev->def->index);
+ err = -ENOMEM;
+ goto out5;
}
- emac_start_link(ep, NULL);
- /* read the MAC Address */
- for (i = 0; i < 6; i++)
+ /* Fill in MAC address */
+ for (i = 0; i < 6; ++i)
ndev->dev_addr[i] = emacdata->mac_addr[i];
+ /* Set some link defaults before we can find out real parameters */
+ dev->phy.speed = SPEED_100;
+ dev->phy.duplex = DUPLEX_FULL;
+ dev->phy.autoneg = AUTONEG_DISABLE;
+ dev->phy.pause = dev->phy.asym_pause = 0;
+ init_timer(&dev->link_timer);
+ dev->link_timer.function = emac_link_timer;
+ dev->link_timer.data = (unsigned long)dev;
+
+ /* Find PHY if any */
+ dev->phy.dev = ndev;
+ dev->phy.mode = emacdata->phy_mode;
+ if (emacdata->phy_map != 0xffffffff) {
+ u32 phy_map = emacdata->phy_map | busy_phy_map;
+ u32 adv;
+
+ DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
+ emacdata->phy_map, busy_phy_map);
+
+ EMAC_RX_CLK_TX(dev->def->index);
+
+ dev->phy.mdio_read = emac_mdio_read;
+ dev->phy.mdio_write = emac_mdio_write;
+
+ /* Configure EMAC with defaults so we can at least use MDIO
+ * This is needed mostly for 440GX
+ */
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ /* XXX
+ * Make GPCS PHY address equal to EMAC index.
+ * We probably should take into account busy_phy_map
+ * and/or phy_map here.
+ */
+ dev->phy.address = dev->def->index;
+ }
+
+ emac_configure(dev);
+
+ for (i = 0; i < 0x20; phy_map >>= 1, ++i)
+ if (!(phy_map & 1)) {
+ int r;
+ busy_phy_map |= 1 << i;
+
+ /* Quick check if there is a PHY at the address */
+ r = emac_mdio_read(dev->ndev, i, MII_BMCR);
+ if (r == 0xffff || r < 0)
+ continue;
+ if (!mii_phy_probe(&dev->phy, i))
+ break;
+ }
+ if (i == 0x20) {
+ printk(KERN_WARNING "emac%d: can't find PHY!\n",
+ dev->def->index);
+ goto out6;
+ }
+
+ /* Init PHY */
+ if (dev->phy.def->ops->init)
+ dev->phy.def->ops->init(&dev->phy);
+
+ /* Disable any PHY features not supported by the platform */
+ dev->phy.def->features &= ~emacdata->phy_feat_exc;
+
+ /* Setup initial link parameters */
+ if (dev->phy.features & SUPPORTED_Autoneg) {
+ adv = dev->phy.features;
+#if !defined(CONFIG_40x)
+ adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+#endif
+ /* Restart autonegotiation */
+ dev->phy.def->ops->setup_aneg(&dev->phy, adv);
+ } else {
+ u32 f = dev->phy.def->features;
+ int speed = SPEED_10, fd = DUPLEX_HALF;
+
+ /* Select highest supported speed/duplex */
+ if (f & SUPPORTED_1000baseT_Full) {
+ speed = SPEED_1000;
+ fd = DUPLEX_FULL;
+ } else if (f & SUPPORTED_1000baseT_Half)
+ speed = SPEED_1000;
+ else if (f & SUPPORTED_100baseT_Full) {
+ speed = SPEED_100;
+ fd = DUPLEX_FULL;
+ } else if (f & SUPPORTED_100baseT_Half)
+ speed = SPEED_100;
+ else if (f & SUPPORTED_10baseT_Full)
+ fd = DUPLEX_FULL;
+
+ /* Force link parameters */
+ dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
+ }
+ } else {
+ emac_reset(dev);
+
+ /* PHY-less configuration.
+ * XXX I probably should move these settings to emacdata
+ */
+ dev->phy.address = -1;
+ dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+ dev->phy.pause = 1;
+ }
+
/* Fill in the driver function table */
ndev->open = &emac_open;
- ndev->hard_start_xmit = &emac_start_xmit;
+ if (dev->tah_dev) {
+ ndev->hard_start_xmit = &emac_start_xmit_sg;
+ ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ } else
+ ndev->hard_start_xmit = &emac_start_xmit;
+ ndev->tx_timeout = &emac_full_tx_reset;
+ ndev->watchdog_timeo = 5 * HZ;
ndev->stop = &emac_close;
ndev->get_stats = &emac_stats;
- if (emacdata->jumbo)
- ndev->change_mtu = &emac_change_mtu;
- ndev->set_mac_address = &emac_set_mac_address;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
+ if (emac_phy_supports_gige(emacdata->phy_mode)) {
+ ndev->change_mtu = &emac_change_mtu;
+ dev->commac.ops = &emac_commac_sg_ops;
+ }
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
- if (emacdata->tah_idx >= 0)
- ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = emac_netpoll;
-#endif
- SET_MODULE_OWNER(ndev);
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
- rc = register_netdev(ndev);
- if (rc != 0)
- goto bail;
+ err = register_netdev(ndev);
+ if (err) {
+ printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
+ dev->def->index, err);
+ goto out6;
+ }
- printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- ndev->name,
+ ocp_set_drvdata(ocpdev, dev);
+
+ printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ ndev->name, dev->def->index,
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
- printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n",
- ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr);
- bail:
- if (rc && commac_reg)
- mal_unregister_commac(ep->mal, &ep->commac);
- if (rc && ndev)
- kfree(ndev);
+ if (dev->phy.address >= 0)
+ printk("%s: found %s PHY (0x%02x)\n", ndev->name,
+ dev->phy.def->name, dev->phy.address);
- return rc;
-}
-
-static int emac_probe(struct ocp_device *ocpdev)
-{
- struct ocp_device *maldev;
- struct ibm_ocp_mal *mal;
- struct ocp_func_emac_data *emacdata;
-
- emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions;
- if (emacdata == NULL) {
- printk(KERN_ERR "emac%d: Missing additional datas !\n",
- ocpdev->def->index);
- return -ENODEV;
- }
-
- /* Get the MAL device */
- maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx);
- if (maldev == NULL) {
- printk("No maldev\n");
- return -ENODEV;
- }
- /*
- * Get MAL driver data, it must be here due to link order.
- * When the driver is modularized, symbol dependencies will
- * ensure the MAL driver is already present if built as a
- * module.
- */
- mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev);
- if (mal == NULL) {
- printk("No maldrv\n");
- return -ENODEV;
- }
-
- /* If we depend on another EMAC for MDIO, wait for it to show up */
- if (emacdata->mdio_idx >= 0 &&
- (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) {
- struct emac_def_dev *ddev;
- /* Add this index to the deferred init table */
- ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL);
- ddev->ocpdev = ocpdev;
- ddev->mal = mal;
- list_add_tail(&ddev->link, &emac_init_list);
- } else {
- emac_init_device(ocpdev, mal);
- }
+ emac_dbg_register(dev->def->index, dev);
return 0;
+ out6:
+ iounmap((void *)dev->emacp);
+ out5:
+ tah_fini(dev->tah_dev);
+ out4:
+ rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
+ out3:
+ zmii_fini(dev->zmii_dev, dev->zmii_input);
+ out2:
+ mal_unregister_commac(dev->mal, &dev->commac);
+ out:
+ kfree(ndev);
+ return err;
}
-/* Structure for a device driver */
static struct ocp_device_id emac_ids[] = {
- {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC},
- {.vendor = OCP_VENDOR_INVALID}
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
+ { .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver emac_driver = {
.name = "emac",
.id_table = emac_ids,
-
.probe = emac_probe,
.remove = emac_remove,
};
static int __init emac_init(void)
{
- printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n");
- printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n");
+ printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
- if (skb_res > 2) {
- printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n",
- skb_res);
- skb_res = 2;
+ DBG(": init" NL);
+
+ if (mal_init())
+ return -ENODEV;
+
+ EMAC_CLK_INTERNAL;
+ if (ocp_register_driver(&emac_driver)) {
+ EMAC_CLK_EXTERNAL;
+ ocp_unregister_driver(&emac_driver);
+ mal_exit();
+ return -ENODEV;
}
+ EMAC_CLK_EXTERNAL;
- return ocp_register_driver(&emac_driver);
+ emac_init_debug();
+ return 0;
}
static void __exit emac_exit(void)
{
+ DBG(": exit" NL);
ocp_unregister_driver(&emac_driver);
+ mal_exit();
+ emac_fini_debug();
}
module_init(emac_init);
diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h
index 97e6e1e..e9b44d0 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.h
+++ b/drivers/net/ibm_emac/ibm_emac_core.h
@@ -1,146 +1,221 @@
/*
- * ibm_emac_core.h
+ * drivers/net/ibm_emac/ibm_emac_core.h
*
- * Ethernet driver for the built in ethernet on the IBM 405 PowerPC
- * processor.
+ * Driver for PowerPC 4xx on-chip ethernet controller.
*
- * Armin Kuster akuster@mvista.com
- * Sept, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Orignial driver
- * Johnnie Peters
- * jpeters@mvista.com
- *
- * Copyright 2000 MontaVista Softare Inc.
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Johnnie Peters <jpeters@mvista.com>
+ * Copyright 2000, 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
+#ifndef __IBM_EMAC_CORE_H_
+#define __IBM_EMAC_CORE_H_
-#ifndef _IBM_EMAC_CORE_H_
-#define _IBM_EMAC_CORE_H_
-
+#include <linux/config.h>
#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
#include <asm/ocp.h>
-#include <asm/mmu.h> /* For phys_addr_t */
#include "ibm_emac.h"
#include "ibm_emac_phy.h"
-#include "ibm_emac_rgmii.h"
#include "ibm_emac_zmii.h"
+#include "ibm_emac_rgmii.h"
#include "ibm_emac_mal.h"
#include "ibm_emac_tah.h"
-#ifndef CONFIG_IBM_EMAC_TXB
-#define NUM_TX_BUFF 64
-#define NUM_RX_BUFF 64
-#else
-#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
+#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
+
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
#endif
-/* This does 16 byte alignment, exactly what we need.
- * The packet length includes FCS, but we don't want to
- * include that when passing upstream as it messes up
- * bridging applications.
+// XXX
+#define EMAC_MIN_MTU 46
+#define EMAC_MAX_MTU 9000
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+ if (mtu > ETH_DATA_LEN)
+ return MAL_MAX_RX_SIZE;
+ else
+ return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
+
+#define EMAC_RX_SKB_HEADROOM \
+ EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+ int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+ return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+ return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ * - normal statistics (packet count, etc)
+ * - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
*/
-#ifndef CONFIG_IBM_EMAC_SKBRES
-#define SKB_RES 2
-#else
-#define SKB_RES CONFIG_IBM_EMAC_SKBRES
-#endif
-/* Note about alignement. alloc_skb() returns a cache line
- * aligned buffer. However, dev_alloc_skb() will add 16 more
- * bytes and "reserve" them, so our buffer will actually end
- * on a half cache line. What we do is to use directly
- * alloc_skb, allocate 16 more bytes to match the total amount
- * allocated by dev_alloc_skb(), but we don't reserve.
- */
-#define MAX_NUM_BUF_DESC 255
-#define DESC_BUF_SIZE 4080 /* max 4096-16 */
-#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16)
+/* Normal TX/RX Statistics */
+struct ibm_emac_stats {
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 tx_packets;
+ u64 tx_bytes;
+ u64 rx_packets_csum;
+ u64 tx_packets_csum;
+};
-/* Transmitter timeout. */
-#define TX_TIMEOUT (2*HZ)
+/* Error statistics */
+struct ibm_emac_error_stats {
+ u64 tx_undo;
-/* MDIO latency delay */
-#define MDIO_DELAY 250
+ /* Software RX Errors */
+ u64 rx_dropped_stack;
+ u64 rx_dropped_oom;
+ u64 rx_dropped_error;
+ u64 rx_dropped_resize;
+ u64 rx_dropped_mtu;
+ u64 rx_stopped;
+ /* BD reported RX errors */
+ u64 rx_bd_errors;
+ u64 rx_bd_overrun;
+ u64 rx_bd_bad_packet;
+ u64 rx_bd_runt_packet;
+ u64 rx_bd_short_event;
+ u64 rx_bd_alignment_error;
+ u64 rx_bd_bad_fcs;
+ u64 rx_bd_packet_too_long;
+ u64 rx_bd_out_of_range;
+ u64 rx_bd_in_range;
+ /* EMAC IRQ reported RX errors */
+ u64 rx_parity;
+ u64 rx_fifo_overrun;
+ u64 rx_overrun;
+ u64 rx_bad_packet;
+ u64 rx_runt_packet;
+ u64 rx_short_event;
+ u64 rx_alignment_error;
+ u64 rx_bad_fcs;
+ u64 rx_packet_too_long;
+ u64 rx_out_of_range;
+ u64 rx_in_range;
-/* Power managment shift registers */
-#define IBM_CPM_EMMII 0 /* Shift value for MII */
-#define IBM_CPM_EMRX 1 /* Shift value for recv */
-#define IBM_CPM_EMTX 2 /* Shift value for MAC */
-#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX))
+ /* Software TX Errors */
+ u64 tx_dropped;
+ /* BD reported TX errors */
+ u64 tx_bd_errors;
+ u64 tx_bd_bad_fcs;
+ u64 tx_bd_carrier_loss;
+ u64 tx_bd_excessive_deferral;
+ u64 tx_bd_excessive_collisions;
+ u64 tx_bd_late_collision;
+ u64 tx_bd_multple_collisions;
+ u64 tx_bd_single_collision;
+ u64 tx_bd_underrun;
+ u64 tx_bd_sqe;
+ /* EMAC IRQ reported TX errors */
+ u64 tx_parity;
+ u64 tx_underrun;
+ u64 tx_sqe;
+ u64 tx_errors;
+};
-#define ENET_HEADER_SIZE 14
-#define ENET_FCS_SIZE 4
-#define ENET_DEF_MTU_SIZE 1500
-#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE)
-#define EMAC_MIN_FRAME 64
-#define EMAC_MAX_FRAME 9018
-#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-
-#ifdef CONFIG_IBM_EMAC_ERRMSG
-void emac_serr_dump_0(struct net_device *dev);
-void emac_serr_dump_1(struct net_device *dev);
-void emac_err_dump(struct net_device *dev, int em0isr);
-void emac_phy_dump(struct net_device *);
-void emac_desc_dump(struct net_device *);
-void emac_mac_dump(struct net_device *);
-void emac_mal_dump(struct net_device *);
-#else
-#define emac_serr_dump_0(dev) do { } while (0)
-#define emac_serr_dump_1(dev) do { } while (0)
-#define emac_err_dump(dev,x) do { } while (0)
-#define emac_phy_dump(dev) do { } while (0)
-#define emac_desc_dump(dev) do { } while (0)
-#define emac_mac_dump(dev) do { } while (0)
-#define emac_mal_dump(dev) do { } while (0)
-#endif
+#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \
+ sizeof(struct ibm_emac_error_stats)) \
+ / sizeof(u64))
struct ocp_enet_private {
- struct sk_buff *tx_skb[NUM_TX_BUFF];
- struct sk_buff *rx_skb[NUM_RX_BUFF];
- struct mal_descriptor *tx_desc;
- struct mal_descriptor *rx_desc;
- struct mal_descriptor *rx_dirty;
- struct net_device_stats stats;
- int tx_cnt;
- int rx_slot;
- int dirty_rx;
- int tx_slot;
- int ack_slot;
- int rx_buffer_size;
+ struct net_device *ndev; /* 0 */
+ struct emac_regs *emacp;
+
+ struct mal_descriptor *tx_desc;
+ int tx_cnt;
+ int tx_slot;
+ int ack_slot;
- struct mii_phy phy_mii;
- int mii_phy_addr;
- int want_autoneg;
- int timer_ticks;
- struct timer_list link_timer;
- struct net_device *mdio_dev;
+ struct mal_descriptor *rx_desc;
+ int rx_slot;
+ struct sk_buff *rx_sg_skb; /* 1 */
+ int rx_skb_size;
+ int rx_sync_size;
- struct ocp_device *rgmii_dev;
- int rgmii_input;
+ struct ibm_emac_stats stats;
+ struct ocp_device *tah_dev;
- struct ocp_device *zmii_dev;
- int zmii_input;
+ struct ibm_ocp_mal *mal;
+ struct mal_commac commac;
- struct ibm_ocp_mal *mal;
- int mal_tx_chan, mal_rx_chan;
- struct mal_commac commac;
+ struct sk_buff *tx_skb[NUM_TX_BUFF];
+ struct sk_buff *rx_skb[NUM_RX_BUFF];
- struct ocp_device *tah_dev;
+ struct ocp_device *zmii_dev;
+ int zmii_input;
+ struct ocp_enet_private *mdio_dev;
+ struct ocp_device *rgmii_dev;
+ int rgmii_input;
- int opened;
- int going_away;
- int wol_irq;
- emac_t *emacp;
- struct ocp_device *ocpdev;
- struct net_device *ndev;
- spinlock_t lock;
+ struct ocp_def *def;
+
+ struct mii_phy phy;
+ struct timer_list link_timer;
+ int reset_failed;
+
+ struct ibm_emac_error_stats estats;
+ struct net_device_stats nstats;
+
+ struct device* ldev;
};
-#endif /* _IBM_EMAC_CORE_H_ */
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
+ * when available.
+ *
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
+#define EMAC_ETHTOOL_REGS_TAH 0x00000004
+
+struct emac_ethtool_regs_hdr {
+ u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+ u32 version;
+ u32 index;
+};
+
+#endif /* __IBM_EMAC_CORE_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c
index c851204..75d3b86 100644
--- a/drivers/net/ibm_emac/ibm_emac_debug.c
+++ b/drivers/net/ibm_emac/ibm_emac_debug.c
@@ -1,224 +1,213 @@
/*
- * ibm_ocp_debug.c
+ * drivers/net/ibm_emac/ibm_emac_debug.c
*
- * This has all the debug routines that where in *_enet.c
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
- * Armin Kuster akuster@mvista.com
- * April , 2002
- *
- * Copyright 2002 MontaVista Softare Inc.
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/sysrq.h>
#include <asm/io.h>
-#include "ibm_ocp_mal.h"
-#include "ibm_ocp_zmii.h"
-#include "ibm_ocp_enet.h"
-extern int emac_phy_read(struct net_device *dev, int mii_id, int reg);
+#include "ibm_emac_core.h"
-void emac_phy_dump(struct net_device *dev)
+static void emac_desc_dump(int idx, struct ocp_enet_private *p)
{
- struct ocp_enet_private *fep = dev->priv;
- unsigned long i;
- uint data;
+ int i;
+ printk("** EMAC%d TX BDs **\n"
+ " tx_cnt = %d tx_slot = %d ack_slot = %d\n",
+ idx, p->tx_cnt, p->tx_slot, p->ack_slot);
+ for (i = 0; i < NUM_TX_BUFF / 2; ++i)
+ printk
+ ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+ i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
+ p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
+ NUM_TX_BUFF / 2 + i,
+ p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
+ p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
+ p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
+ p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
- printk(KERN_DEBUG " Prepare for Phy dump....\n");
- for (i = 0; i < 0x1A; i++) {
- data = emac_phy_read(dev, fep->mii_phy_addr, i);
- printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);
- if (i == 0x07)
- i = 0x0f;
+ printk("** EMAC%d RX BDs **\n"
+ " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
+ " rx_sg_skb = 0x%p\n",
+ idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
+ p->rx_sync_size, p->rx_sg_skb);
+ for (i = 0; i < NUM_RX_BUFF / 2; ++i)
+ printk
+ ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
+ i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
+ p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
+ NUM_RX_BUFF / 2 + i,
+ p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
+ p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
+ p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
+ p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
+}
+
+static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
+{
+ struct emac_regs *p = dev->emacp;
+
+ printk("** EMAC%d registers **\n"
+ "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
+ "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
+ "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
+ "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
+ "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
+ "LSA = %04x%08x IPGVR = 0x%04x\n"
+ "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
+ "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
+ idx, in_be32(&p->mr0), in_be32(&p->mr1),
+ in_be32(&p->tmr0), in_be32(&p->tmr1),
+ in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
+ in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
+ in_be32(&p->vtci),
+ in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
+ in_be32(&p->iaht4),
+ in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
+ in_be32(&p->gaht4),
+ in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
+ in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
+ in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
+ );
+
+ emac_desc_dump(idx, dev);
+}
+
+static void emac_mal_dump(struct ibm_ocp_mal *mal)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ int i;
+
+ printk("** MAL%d Registers **\n"
+ "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
+ "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
+ "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
+ mal->def->index,
+ get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
+ get_mal_dcrn(mal, MAL_IER),
+ get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
+ get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
+ get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
+ get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
+ );
+
+ printk("TX|");
+ for (i = 0; i < maldata->num_tx_chans; ++i) {
+ if (i && !(i % 4))
+ printk("\n ");
+ printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
}
-}
-
-void emac_desc_dump(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- int curr_slot;
-
- printk(KERN_DEBUG
- "dumping the receive descriptors: current slot is %d\n",
- fep->rx_slot);
- for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {
- printk(KERN_DEBUG
- "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",
- curr_slot, fep->rx_desc[curr_slot].ctrl,
- fep->rx_desc[curr_slot].data_len,
- (unsigned int)fep->rx_desc[curr_slot].data_ptr);
+ printk("\nRX|");
+ for (i = 0; i < maldata->num_rx_chans; ++i) {
+ if (i && !(i % 4))
+ printk("\n ");
+ printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
}
-}
-
-void emac_mac_dump(struct net_device *dev)
-{
- struct ocp_enet_private *fep = dev->priv;
- volatile emac_t *emacp = fep->emacp;
-
- printk(KERN_DEBUG "EMAC DEBUG ********** \n");
- printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0));
- printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1));
- printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));
- printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));
- printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));
- printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));
- printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));
- printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));
- printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));
- printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n",
- in_be32(&emacp->em0vtpid));
-}
-
-void emac_mal_dump(struct net_device *dev)
-{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
-
- printk(KERN_DEBUG " MAL DEBUG ********** \n");
- printk(KERN_DEBUG " MCR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALCR));
- printk(KERN_DEBUG " ESR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALESR));
- printk(KERN_DEBUG " IER ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALIER));
-#ifdef CONFIG_40x
- printk(KERN_DEBUG " DBR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR));
-#endif /* CONFIG_40x */
- printk(KERN_DEBUG " TXCASR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR));
- printk(KERN_DEBUG " TXCARR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR));
- printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR));
- printk(KERN_DEBUG " TXDEIR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR));
- printk(KERN_DEBUG " RXCASR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR));
- printk(KERN_DEBUG " RXCARR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR));
- printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR));
- printk(KERN_DEBUG " RXDEIR ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR));
- printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R));
- printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R));
- printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R));
- printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R));
- printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R));
- printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R));
- printk(KERN_DEBUG " RCBS0 ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0));
- printk(KERN_DEBUG " RCBS1 ==> 0x%x\n",
- (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1));
-}
-
-void emac_serr_dump_0(struct net_device *dev)
-{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
- unsigned long int mal_error, plb_error, plb_addr;
-
- mal_error = get_mal_dcrn(mal, DCRN_MALESR);
- printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",
- (mal_error & 0x40000000) ? "Receive" :
- "Transmit", (mal_error & 0x3e000000) >> 25);
- printk(KERN_DEBUG " ----- latched error -----\n");
- if (mal_error & MALESR_DE)
- printk(KERN_DEBUG " DE: descriptor error\n");
- if (mal_error & MALESR_OEN)
- printk(KERN_DEBUG " ONE: OPB non-fullword error\n");
- if (mal_error & MALESR_OTE)
- printk(KERN_DEBUG " OTE: OPB timeout error\n");
- if (mal_error & MALESR_OSE)
- printk(KERN_DEBUG " OSE: OPB slave error\n");
-
- if (mal_error & MALESR_PEIN) {
- plb_error = mfdcr(DCRN_PLB0_BESR);
- printk(KERN_DEBUG
- " PEIN: PLB error, PLB0_BESR is 0x%x\n",
- (unsigned int)plb_error);
- plb_addr = mfdcr(DCRN_PLB0_BEAR);
- printk(KERN_DEBUG
- " PEIN: PLB error, PLB0_BEAR is 0x%x\n",
- (unsigned int)plb_addr);
+ printk("\n ");
+ for (i = 0; i < maldata->num_rx_chans; ++i) {
+ u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
+ if (i && !(i % 3))
+ printk("\n ");
+ printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
}
+ printk("\n");
}
-void emac_serr_dump_1(struct net_device *dev)
+static struct ocp_enet_private *__emacs[4];
+static struct ibm_ocp_mal *__mals[1];
+
+void emac_dbg_register(int idx, struct ocp_enet_private *dev)
{
- struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal;
- int mal_error = get_mal_dcrn(mal, DCRN_MALESR);
+ unsigned long flags;
- printk(KERN_DEBUG " ----- cumulative errors -----\n");
- if (mal_error & MALESR_DEI)
- printk(KERN_DEBUG " DEI: descriptor error interrupt\n");
- if (mal_error & MALESR_ONEI)
- printk(KERN_DEBUG " OPB non-fullword error interrupt\n");
- if (mal_error & MALESR_OTEI)
- printk(KERN_DEBUG " OTEI: timeout error interrupt\n");
- if (mal_error & MALESR_OSEI)
- printk(KERN_DEBUG " OSEI: slave error interrupt\n");
- if (mal_error & MALESR_PBEI)
- printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n");
+ if (idx >= sizeof(__emacs) / sizeof(__emacs[0])) {
+ printk(KERN_WARNING
+ "invalid index %d when registering EMAC for debugging\n",
+ idx);
+ return;
+ }
+
+ local_irq_save(flags);
+ __emacs[idx] = dev;
+ local_irq_restore(flags);
}
-void emac_err_dump(struct net_device *dev, int em0isr)
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
{
- printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);
+ unsigned long flags;
- if (em0isr & EMAC_ISR_OVR)
- printk(KERN_DEBUG " OVR: overrun\n");
- if (em0isr & EMAC_ISR_PP)
- printk(KERN_DEBUG " PP: control pause packet\n");
- if (em0isr & EMAC_ISR_BP)
- printk(KERN_DEBUG " BP: packet error\n");
- if (em0isr & EMAC_ISR_RP)
- printk(KERN_DEBUG " RP: runt packet\n");
- if (em0isr & EMAC_ISR_SE)
- printk(KERN_DEBUG " SE: short event\n");
- if (em0isr & EMAC_ISR_ALE)
- printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n");
- if (em0isr & EMAC_ISR_BFCS)
- printk(KERN_DEBUG " BFCS: bad FCS\n");
- if (em0isr & EMAC_ISR_PTLE)
- printk(KERN_DEBUG " PTLE: oversized packet\n");
- if (em0isr & EMAC_ISR_ORE)
- printk(KERN_DEBUG
- " ORE: packet length field > max allowed LLC\n");
- if (em0isr & EMAC_ISR_IRE)
- printk(KERN_DEBUG " IRE: In Range error\n");
- if (em0isr & EMAC_ISR_DBDM)
- printk(KERN_DEBUG " DBDM: xmit error or SQE\n");
- if (em0isr & EMAC_ISR_DB0)
- printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n");
- if (em0isr & EMAC_ISR_SE0)
- printk(KERN_DEBUG
- " SE0: Signal Quality Error test failure from TX channel 0\n");
- if (em0isr & EMAC_ISR_TE0)
- printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n");
- if (em0isr & EMAC_ISR_DB1)
- printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n");
- if (em0isr & EMAC_ISR_SE1)
- printk(KERN_DEBUG
- " SE1: Signal Quality Error test failure from TX channel 1\n");
- if (em0isr & EMAC_ISR_TE1)
- printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n");
- if (em0isr & EMAC_ISR_MOS)
- printk(KERN_DEBUG " MOS\n");
- if (em0isr & EMAC_ISR_MOF)
- printk(KERN_DEBUG " MOF\n");
+ if (idx >= sizeof(__mals) / sizeof(__mals[0])) {
+ printk(KERN_WARNING
+ "invalid index %d when registering MAL for debugging\n",
+ idx);
+ return;
+ }
- emac_mac_dump(dev);
- emac_mal_dump(dev);
+ local_irq_save(flags);
+ __mals[idx] = mal;
+ local_irq_restore(flags);
}
+
+void emac_dbg_dump_all(void)
+{
+ unsigned int i;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ for (i = 0; i < sizeof(__mals) / sizeof(__mals[0]); ++i)
+ if (__mals[i])
+ emac_mal_dump(__mals[i]);
+
+ for (i = 0; i < sizeof(__emacs) / sizeof(__emacs[0]); ++i)
+ if (__emacs[i])
+ emac_mac_dump(i, __emacs[i]);
+
+ local_irq_restore(flags);
+}
+
+#if defined(CONFIG_MAGIC_SYSRQ)
+static void emac_sysrq_handler(int key, struct pt_regs *pt_regs,
+ struct tty_struct *tty)
+{
+ emac_dbg_dump_all();
+}
+
+static struct sysrq_key_op emac_sysrq_op = {
+ .handler = emac_sysrq_handler,
+ .help_msg = "emaC",
+ .action_msg = "Show EMAC(s) status",
+};
+
+int __init emac_init_debug(void)
+{
+ return register_sysrq_key('c', &emac_sysrq_op);
+}
+
+void __exit emac_fini_debug(void)
+{
+ unregister_sysrq_key('c', &emac_sysrq_op);
+}
+
+#else
+int __init emac_init_debug(void)
+{
+ return 0;
+}
+void __exit emac_fini_debug(void)
+{
+}
+#endif /* CONFIG_MAGIC_SYSRQ */
diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h
new file mode 100644
index 0000000..e85fbe0
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_debug.h
@@ -0,0 +1,63 @@
+/*
+ * drivers/net/ibm_emac/ibm_ocp_debug.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_DEBUG_H_
+#define __IBM_EMAC_DEBUG_H_
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "ibm_emac_core.h"
+#include "ibm_emac_mal.h"
+
+#if defined(CONFIG_IBM_EMAC_DEBUG)
+void emac_dbg_register(int idx, struct ocp_enet_private *dev);
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
+int emac_init_debug(void) __init;
+void emac_fini_debug(void) __exit;
+void emac_dbg_dump_all(void);
+# define DBG_LEVEL 1
+#else
+# define emac_dbg_register(x,y) ((void)0)
+# define mal_dbg_register(x,y) ((void)0)
+# define emac_init_debug() ((void)0)
+# define emac_fini_debug() ((void)0)
+# define emac_dbg_dump_all() ((void)0)
+# define DBG_LEVEL 0
+#endif
+
+#if DBG_LEVEL > 0
+# define DBG(f,x...) printk("emac" f, ##x)
+# define MAL_DBG(f,x...) printk("mal" f, ##x)
+# define ZMII_DBG(f,x...) printk("zmii" f, ##x)
+# define RGMII_DBG(f,x...) printk("rgmii" f, ##x)
+# define NL "\n"
+#else
+# define DBG(f,x...) ((void)0)
+# define MAL_DBG(f,x...) ((void)0)
+# define ZMII_DBG(f,x...) ((void)0)
+# define RGMII_DBG(f,x...) ((void)0)
+#endif
+#if DBG_LEVEL > 1
+# define DBG2(f,x...) DBG(f, ##x)
+# define MAL_DBG2(f,x...) MAL_DBG(f, ##x)
+# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x)
+# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x)
+#else
+# define DBG2(f,x...) ((void)0)
+# define MAL_DBG2(f,x...) ((void)0)
+# define ZMII_DBG2(f,x...) ((void)0)
+# define RGMII_DBG2(f,x...) ((void)0)
+#endif
+
+#endif /* __IBM_EMAC_DEBUG_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c
index e59f57f..da88d43 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.c
+++ b/drivers/net/ibm_emac/ibm_emac_mal.c
@@ -1,436 +1,565 @@
/*
- * ibm_ocp_mal.c
+ * drivers/net/ibm_emac/ibm_emac_mal.c
*
- * Armin Kuster akuster@mvista.com
- * Juen, 2002
+ * Memory Access Layer (MAL) support
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2002 MontaVista Softare Inc.
+ * Based on original work by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>,
+ * David Gibson <hermes@gibson.dropbear.id.au>,
+ *
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/ocp.h>
+#include "ibm_emac_core.h"
#include "ibm_emac_mal.h"
+#include "ibm_emac_debug.h"
-// Locking: Should we share a lock with the client ? The client could provide
-// a lock pointer (optionally) in the commac structure... I don't think this is
-// really necessary though
-
-/* This lock protects the commac list. On today UP implementations, it's
- * really only used as IRQ protection in mal_{register,unregister}_commac()
- */
-static DEFINE_RWLOCK(mal_list_lock);
-
-int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+int __init mal_register_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
+ local_irq_save(flags);
- write_lock_irqsave(&mal_list_lock, flags);
+ MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
+ commac->tx_chan_mask, commac->rx_chan_mask);
- /* Don't let multiple commacs claim the same channel */
+ /* Don't let multiple commacs claim the same channel(s) */
if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
(mal->rx_chan_mask & commac->rx_chan_mask)) {
- write_unlock_irqrestore(&mal_list_lock, flags);
+ local_irq_restore(flags);
+ printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
+ mal->def->index);
return -EBUSY;
}
mal->tx_chan_mask |= commac->tx_chan_mask;
mal->rx_chan_mask |= commac->rx_chan_mask;
+ list_add(&commac->list, &mal->list);
- list_add(&commac->list, &mal->commac);
-
- write_unlock_irqrestore(&mal_list_lock, flags);
-
+ local_irq_restore(flags);
return 0;
}
-int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+void __exit mal_unregister_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac)
{
unsigned long flags;
+ local_irq_save(flags);
- write_lock_irqsave(&mal_list_lock, flags);
+ MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
+ commac->tx_chan_mask, commac->rx_chan_mask);
mal->tx_chan_mask &= ~commac->tx_chan_mask;
mal->rx_chan_mask &= ~commac->rx_chan_mask;
-
list_del_init(&commac->list);
- write_unlock_irqrestore(&mal_list_lock, flags);
-
- return 0;
+ local_irq_restore(flags);
}
int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
{
- switch (channel) {
- case 0:
- set_mal_dcrn(mal, DCRN_MALRCBS0, size);
- break;
-#ifdef DCRN_MALRCBS1
- case 1:
- set_mal_dcrn(mal, DCRN_MALRCBS1, size);
- break;
-#endif
-#ifdef DCRN_MALRCBS2
- case 2:
- set_mal_dcrn(mal, DCRN_MALRCBS2, size);
- break;
-#endif
-#ifdef DCRN_MALRCBS3
- case 3:
- set_mal_dcrn(mal, DCRN_MALRCBS3, size);
- break;
-#endif
- default:
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
+ size > MAL_MAX_RX_SIZE);
+
+ MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
+
+ if (size & 0xf) {
+ printk(KERN_WARNING
+ "mal%d: incorrect RX size %lu for the channel %d\n",
+ mal->def->index, size, channel);
return -EINVAL;
}
+ set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
return 0;
}
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
+ return channel * NUM_TX_BUFF;
+}
+
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
+{
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
+ return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
+}
+
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ local_bh_disable();
+ MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
+ set_mal_dcrn(mal, MAL_TXCASR,
+ get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
+ local_bh_enable();
+}
+
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
+ MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
+}
+
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ local_bh_disable();
+ MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
+ set_mal_dcrn(mal, MAL_RXCASR,
+ get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
+ local_bh_enable();
+}
+
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
+{
+ set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
+ MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
+}
+
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ local_bh_disable();
+ MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
+ list_add_tail(&commac->poll_list, &mal->poll_list);
+ local_bh_enable();
+}
+
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
+{
+ local_bh_disable();
+ MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
+ list_del(&commac->poll_list);
+ local_bh_enable();
+}
+
+/* synchronized by mal_poll() */
+static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
+{
+ MAL_DBG2("%d: enable_irq" NL, mal->def->index);
+ set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
+}
+
+/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
+static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
+{
+ set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
+ MAL_DBG2("%d: disable_irq" NL, mal->def->index);
+}
+
static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- unsigned long mal_error;
-
- /*
- * This SERR applies to one of the devices on the MAL, here we charge
- * it against the first EMAC registered for the MAL.
- */
-
- mal_error = get_mal_dcrn(mal, DCRN_MALESR);
-
- printk(KERN_ERR "%s: System Error (MALESR=%lx)\n",
- "MAL" /* FIXME: get the name right */ , mal_error);
-
- /* FIXME: decipher error */
- /* DIXME: distribute to commacs, if possible */
+ u32 esr = get_mal_dcrn(mal, MAL_ESR);
/* Clear the error status register */
- set_mal_dcrn(mal, DCRN_MALESR, mal_error);
+ set_mal_dcrn(mal, MAL_ESR, esr);
+ MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
+
+ if (esr & MAL_ESR_EVB) {
+ if (esr & MAL_ESR_DE) {
+ /* We ignore Descriptor error,
+ * TXDE or RXDE interrupt will be generated anyway.
+ */
+ return IRQ_HANDLED;
+ }
+
+ if (esr & MAL_ESR_PEIN) {
+ /* PLB error, it's probably buggy hardware or
+ * incorrect physical address in BD (i.e. bug)
+ */
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: system error, PLB (ESR = 0x%08x)\n",
+ mal->def->index, esr);
+ return IRQ_HANDLED;
+ }
+
+ /* OPB error, it's probably buggy hardware or incorrect EBC setup */
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: system error, OPB (ESR = 0x%08x)\n",
+ mal->def->index, esr);
+ }
return IRQ_HANDLED;
}
+static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
+{
+ if (likely(netif_rx_schedule_prep(&mal->poll_dev))) {
+ MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
+ mal_disable_eob_irq(mal);
+ __netif_rx_schedule(&mal->poll_dev);
+ } else
+ MAL_DBG2("%d: already in poll" NL, mal->def->index);
+}
+
static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long isr;
-
- isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR);
- set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (isr & mc->tx_chan_mask) {
- mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
-
+ u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
+ MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_TXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long isr;
-
- isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR);
- set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (isr & mc->rx_chan_mask) {
- mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
-
+ u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
+ MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_RXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
- struct list_head *l;
- unsigned long deir;
+ u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
+ set_mal_dcrn(mal, MAL_TXDEIR, deir);
- deir = get_mal_dcrn(mal, DCRN_MALTXDEIR);
+ MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
- /* FIXME: print which MAL correctly */
- printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n",
- "MAL", deir);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
- struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
- if (deir & mc->tx_chan_mask) {
- mc->ops->txde(mc->dev, deir & mc->tx_chan_mask);
- }
- }
- read_unlock(&mal_list_lock);
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
+ mal->def->index, deir);
return IRQ_HANDLED;
}
-/*
- * This interrupt should be very rare at best. This occurs when
- * the hardware has a problem with the receive descriptors. The manual
- * states that it occurs when the hardware cannot the receive descriptor
- * empty bit is not set. The recovery mechanism will be to
- * traverse through the descriptors, handle any that are marked to be
- * handled and reinitialize each along the way. At that point the driver
- * will be restarted.
- */
static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
- unsigned long deir;
+ u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
- deir = get_mal_dcrn(mal, DCRN_MALRXDEIR);
+ MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
- /*
- * This really is needed. This case encountered in stress testing.
- */
- if (deir == 0)
- return IRQ_HANDLED;
-
- /* FIXME: print which MAL correctly */
- printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n",
- "MAL", deir);
-
- read_lock(&mal_list_lock);
- list_for_each(l, &mal->commac) {
+ list_for_each(l, &mal->list) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
-
if (deir & mc->rx_chan_mask) {
- mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask);
+ mc->rx_stopped = 1;
+ mc->ops->rxde(mc->dev);
}
}
- read_unlock(&mal_list_lock);
+
+ mal_schedule_poll(mal);
+ set_mal_dcrn(mal, MAL_RXDEIR, deir);
return IRQ_HANDLED;
}
+static int mal_poll(struct net_device *ndev, int *budget)
+{
+ struct ibm_ocp_mal *mal = ndev->priv;
+ struct list_head *l;
+ int rx_work_limit = min(ndev->quota, *budget), received = 0, done;
+
+ MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
+ rx_work_limit);
+ again:
+ /* Process TX skbs */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ mc->ops->poll_tx(mc->dev);
+ }
+
+ /* Process RX skbs.
+ * We _might_ need something more smart here to enforce polling fairness.
+ */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ int n = mc->ops->poll_rx(mc->dev, rx_work_limit);
+ if (n) {
+ received += n;
+ rx_work_limit -= n;
+ if (rx_work_limit <= 0) {
+ done = 0;
+ goto more_work; // XXX What if this is the last one ?
+ }
+ }
+ }
+
+ /* We need to disable IRQs to protect from RXDE IRQ here */
+ local_irq_disable();
+ __netif_rx_complete(ndev);
+ mal_enable_eob_irq(mal);
+ local_irq_enable();
+
+ done = 1;
+
+ /* Check for "rotting" packet(s) */
+ list_for_each(l, &mal->poll_list) {
+ struct mal_commac *mc =
+ list_entry(l, struct mal_commac, poll_list);
+ if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
+ MAL_DBG2("%d: rotting packet" NL, mal->def->index);
+ if (netif_rx_reschedule(ndev, received))
+ mal_disable_eob_irq(mal);
+ else
+ MAL_DBG2("%d: already in poll list" NL,
+ mal->def->index);
+
+ if (rx_work_limit > 0)
+ goto again;
+ else
+ goto more_work;
+ }
+ mc->ops->poll_tx(mc->dev);
+ }
+
+ more_work:
+ ndev->quota -= received;
+ *budget -= received;
+
+ MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, *budget,
+ done ? 0 : 1);
+ return done ? 0 : 1;
+}
+
+static void mal_reset(struct ibm_ocp_mal *mal)
+{
+ int n = 10;
+ MAL_DBG("%d: reset" NL, mal->def->index);
+
+ set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
+
+ /* Wait for reset to complete (1 system clock) */
+ while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
+ --n;
+
+ if (unlikely(!n))
+ printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
+}
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct ibm_mal_regs);
+}
+
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
+{
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
+ struct ocp_func_mal_data *maldata = mal->def->additions;
+ int i;
+
+ hdr->version = MAL_VERSION;
+ hdr->index = mal->def->index;
+
+ regs->tx_count = maldata->num_tx_chans;
+ regs->rx_count = maldata->num_rx_chans;
+
+ regs->cfg = get_mal_dcrn(mal, MAL_CFG);
+ regs->esr = get_mal_dcrn(mal, MAL_ESR);
+ regs->ier = get_mal_dcrn(mal, MAL_IER);
+ regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
+ regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
+ regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
+ regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
+ regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
+ regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
+ regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
+ regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
+
+ for (i = 0; i < regs->tx_count; ++i)
+ regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
+
+ for (i = 0; i < regs->rx_count; ++i) {
+ regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
+ regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
+ }
+ return regs + 1;
+}
+
static int __init mal_probe(struct ocp_device *ocpdev)
{
- struct ibm_ocp_mal *mal = NULL;
+ struct ibm_ocp_mal *mal;
struct ocp_func_mal_data *maldata;
- int err = 0;
+ int err = 0, i, bd_size;
- maldata = (struct ocp_func_mal_data *)ocpdev->def->additions;
+ MAL_DBG("%d: probe" NL, ocpdev->def->index);
+
+ maldata = ocpdev->def->additions;
if (maldata == NULL) {
- printk(KERN_ERR "mal%d: Missing additional datas !\n",
+ printk(KERN_ERR "mal%d: missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
- mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
- if (mal == NULL) {
+ mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
+ if (!mal) {
printk(KERN_ERR
- "mal%d: Out of memory allocating MAL structure !\n",
+ "mal%d: out of memory allocating MAL structure!\n",
ocpdev->def->index);
return -ENOMEM;
}
- memset(mal, 0, sizeof(*mal));
+ mal->dcrbase = maldata->dcr_base;
+ mal->def = ocpdev->def;
- switch (ocpdev->def->index) {
- case 0:
- mal->dcrbase = DCRN_MAL_BASE;
- break;
-#ifdef DCRN_MAL1_BASE
- case 1:
- mal->dcrbase = DCRN_MAL1_BASE;
- break;
-#endif
- default:
- BUG();
- }
+ INIT_LIST_HEAD(&mal->poll_list);
+ set_bit(__LINK_STATE_START, &mal->poll_dev.state);
+ mal->poll_dev.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
+ mal->poll_dev.poll = mal_poll;
+ mal->poll_dev.priv = mal;
+ atomic_set(&mal->poll_dev.refcnt, 1);
- /**************************/
+ INIT_LIST_HEAD(&mal->list);
- INIT_LIST_HEAD(&mal->commac);
-
- set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF);
- set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF);
-
- set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */
- /* FIXME: Add delay */
+ /* Load power-on reset defaults */
+ mal_reset(mal);
/* Set the MAL configuration register */
- set_mal_dcrn(mal, DCRN_MALCR,
- MALCR_PLBB | MALCR_OPBBL | MALCR_LEA |
- MALCR_PLBLT_DEFAULT);
+ set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
+ MAL_CFG_OPBBL | MAL_CFG_LEA);
- /* It would be nice to allocate buffers separately for each
- * channel, but we can't because the channels share the upper
- * 13 bits of address lines. Each channels buffer must also
- * be 4k aligned, so we allocate 4k for each channel. This is
- * inefficient FIXME: do better, if possible */
- mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
- MAL_DT_ALIGN *
- maldata->num_tx_chans,
- &mal->tx_phys_addr, GFP_KERNEL);
- if (mal->tx_virt_addr == NULL) {
+ mal_enable_eob_irq(mal);
+
+ /* Allocate space for BD rings */
+ BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
+ BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
+ bd_size = sizeof(struct mal_descriptor) *
+ (NUM_TX_BUFF * maldata->num_tx_chans +
+ NUM_RX_BUFF * maldata->num_rx_chans);
+ mal->bd_virt =
+ dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
+
+ if (!mal->bd_virt) {
printk(KERN_ERR
- "mal%d: Out of memory allocating MAL descriptors !\n",
- ocpdev->def->index);
+ "mal%d: out of memory allocating RX/TX descriptors!\n",
+ mal->def->index);
err = -ENOMEM;
goto fail;
}
+ memset(mal->bd_virt, 0, bd_size);
- /* God, oh, god, I hate DCRs */
- set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr);
-#ifdef DCRN_MALTXCTP1R
- if (maldata->num_tx_chans > 1)
- set_mal_dcrn(mal, DCRN_MALTXCTP1R,
- mal->tx_phys_addr + MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP1R */
-#ifdef DCRN_MALTXCTP2R
- if (maldata->num_tx_chans > 2)
- set_mal_dcrn(mal, DCRN_MALTXCTP2R,
- mal->tx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP2R */
-#ifdef DCRN_MALTXCTP3R
- if (maldata->num_tx_chans > 3)
- set_mal_dcrn(mal, DCRN_MALTXCTP3R,
- mal->tx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP3R */
-#ifdef DCRN_MALTXCTP4R
- if (maldata->num_tx_chans > 4)
- set_mal_dcrn(mal, DCRN_MALTXCTP4R,
- mal->tx_phys_addr + 4 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP4R */
-#ifdef DCRN_MALTXCTP5R
- if (maldata->num_tx_chans > 5)
- set_mal_dcrn(mal, DCRN_MALTXCTP5R,
- mal->tx_phys_addr + 5 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP5R */
-#ifdef DCRN_MALTXCTP6R
- if (maldata->num_tx_chans > 6)
- set_mal_dcrn(mal, DCRN_MALTXCTP6R,
- mal->tx_phys_addr + 6 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP6R */
-#ifdef DCRN_MALTXCTP7R
- if (maldata->num_tx_chans > 7)
- set_mal_dcrn(mal, DCRN_MALTXCTP7R,
- mal->tx_phys_addr + 7 * MAL_DT_ALIGN);
-#endif /* DCRN_MALTXCTP7R */
+ for (i = 0; i < maldata->num_tx_chans; ++i)
+ set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
+ sizeof(struct mal_descriptor) *
+ mal_tx_bd_offset(mal, i));
- mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev,
- MAL_DT_ALIGN *
- maldata->num_rx_chans,
- &mal->rx_phys_addr, GFP_KERNEL);
-
- set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr);
-#ifdef DCRN_MALRXCTP1R
- if (maldata->num_rx_chans > 1)
- set_mal_dcrn(mal, DCRN_MALRXCTP1R,
- mal->rx_phys_addr + MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP1R */
-#ifdef DCRN_MALRXCTP2R
- if (maldata->num_rx_chans > 2)
- set_mal_dcrn(mal, DCRN_MALRXCTP2R,
- mal->rx_phys_addr + 2 * MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP2R */
-#ifdef DCRN_MALRXCTP3R
- if (maldata->num_rx_chans > 3)
- set_mal_dcrn(mal, DCRN_MALRXCTP3R,
- mal->rx_phys_addr + 3 * MAL_DT_ALIGN);
-#endif /* DCRN_MALRXCTP3R */
+ for (i = 0; i < maldata->num_rx_chans; ++i)
+ set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
+ sizeof(struct mal_descriptor) *
+ mal_rx_bd_offset(mal, i));
err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
if (err)
- goto fail;
- err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal);
+ goto fail2;
+ err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
if (err)
- goto fail;
+ goto fail3;
err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
- goto fail;
+ goto fail4;
err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
if (err)
- goto fail;
+ goto fail5;
err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
if (err)
- goto fail;
+ goto fail6;
- set_mal_dcrn(mal, DCRN_MALIER,
- MALIER_DE | MALIER_NE | MALIER_TE |
- MALIER_OPBE | MALIER_PLBE);
+ /* Enable all MAL SERR interrupt sources */
+ set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
- /* Advertise me to the rest of the world */
+ /* Advertise this instance to the rest of the world */
ocp_set_drvdata(ocpdev, mal);
- printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n",
- ocpdev->def->index, maldata->num_tx_chans,
- maldata->num_rx_chans);
+ mal_dbg_register(mal->def->index, mal);
+ printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
+ mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
return 0;
+ fail6:
+ free_irq(maldata->rxde_irq, mal);
+ fail5:
+ free_irq(maldata->txeob_irq, mal);
+ fail4:
+ free_irq(maldata->txde_irq, mal);
+ fail3:
+ free_irq(maldata->serr_irq, mal);
+ fail2:
+ dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
fail:
- /* FIXME: dispose requested IRQs ! */
- if (err && mal)
- kfree(mal);
+ kfree(mal);
return err;
}
static void __exit mal_remove(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
- struct ocp_func_mal_data *maldata = ocpdev->def->additions;
+ struct ocp_func_mal_data *maldata = mal->def->additions;
- BUG_ON(!maldata);
+ MAL_DBG("%d: remove" NL, mal->def->index);
+
+ /* Syncronize with scheduled polling,
+ stolen from net/core/dev.c:dev_close()
+ */
+ clear_bit(__LINK_STATE_START, &mal->poll_dev.state);
+ netif_poll_disable(&mal->poll_dev);
+
+ if (!list_empty(&mal->list)) {
+ /* This is *very* bad */
+ printk(KERN_EMERG
+ "mal%d: commac list is not empty on remove!\n",
+ mal->def->index);
+ }
ocp_set_drvdata(ocpdev, NULL);
- /* FIXME: shut down the MAL, deal with dependency with emac */
free_irq(maldata->serr_irq, mal);
free_irq(maldata->txde_irq, mal);
free_irq(maldata->txeob_irq, mal);
free_irq(maldata->rxde_irq, mal);
free_irq(maldata->rxeob_irq, mal);
- if (mal->tx_virt_addr)
- dma_free_coherent(&ocpdev->dev,
- MAL_DT_ALIGN * maldata->num_tx_chans,
- mal->tx_virt_addr, mal->tx_phys_addr);
+ mal_reset(mal);
- if (mal->rx_virt_addr)
- dma_free_coherent(&ocpdev->dev,
- MAL_DT_ALIGN * maldata->num_rx_chans,
- mal->rx_virt_addr, mal->rx_phys_addr);
+ mal_dbg_register(mal->def->index, NULL);
+
+ dma_free_coherent(&ocpdev->dev,
+ sizeof(struct mal_descriptor) *
+ (NUM_TX_BUFF * maldata->num_tx_chans +
+ NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
+ mal->bd_dma);
kfree(mal);
}
/* Structure for a device driver */
static struct ocp_device_id mal_ids[] = {
- {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL},
- {.vendor = OCP_VENDOR_INVALID}
+ { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
+ { .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver mal_driver = {
@@ -441,23 +570,14 @@
.remove = mal_remove,
};
-static int __init init_mals(void)
+int __init mal_init(void)
{
- int rc;
-
- rc = ocp_register_driver(&mal_driver);
- if (rc < 0) {
- ocp_unregister_driver(&mal_driver);
- return -ENODEV;
- }
-
- return 0;
+ MAL_DBG(": init" NL);
+ return ocp_register_driver(&mal_driver);
}
-static void __exit exit_mals(void)
+void __exit mal_exit(void)
{
+ MAL_DBG(": exit" NL);
ocp_unregister_driver(&mal_driver);
}
-
-module_init(init_mals);
-module_exit(exit_mals);
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
index dd9f0da..15b0bda 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -1,131 +1,267 @@
-#ifndef _IBM_EMAC_MAL_H
-#define _IBM_EMAC_MAL_H
+/*
+ * drivers/net/ibm_emac/ibm_emac_mal.h
+ *
+ * Memory Access Layer (MAL) support
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2002 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_MAL_H_
+#define __IBM_EMAC_MAL_H_
+#include <linux/config.h>
+#include <linux/init.h>
#include <linux/list.h>
+#include <linux/netdevice.h>
-#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */
+#include <asm/io.h>
-#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan))
+/*
+ * These MAL "versions" probably aren't the real versions IBM uses for these
+ * MAL cores, I assigned them just to make #ifdefs in this file nicer and
+ * reflect the fact that 40x and 44x have slightly different MALs. --ebs
+ */
+#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_NP405H)
+#define MAL_VERSION 1
+#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#define MAL_VERSION 2
+#else
+#error "Unknown SoC, please check chip manual and choose MAL 'version'"
+#endif
+
+/* MALx DCR registers */
+#define MAL_CFG 0x00
+#define MAL_CFG_SR 0x80000000
+#define MAL_CFG_PLBB 0x00004000
+#define MAL_CFG_OPBBL 0x00000080
+#define MAL_CFG_EOPIE 0x00000004
+#define MAL_CFG_LEA 0x00000002
+#define MAL_CFG_SD 0x00000001
+#if MAL_VERSION == 1
+#define MAL_CFG_PLBP_MASK 0x00c00000
+#define MAL_CFG_PLBP_10 0x00800000
+#define MAL_CFG_GA 0x00200000
+#define MAL_CFG_OA 0x00100000
+#define MAL_CFG_PLBLE 0x00080000
+#define MAL_CFG_PLBT_MASK 0x00078000
+#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
+#elif MAL_VERSION == 2
+#define MAL_CFG_RPP_MASK 0x00c00000
+#define MAL_CFG_RPP_10 0x00800000
+#define MAL_CFG_RMBS_MASK 0x00300000
+#define MAL_CFG_WPP_MASK 0x000c0000
+#define MAL_CFG_WPP_10 0x00080000
+#define MAL_CFG_WMBS_MASK 0x00030000
+#define MAL_CFG_PLBLE 0x00008000
+#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
+ MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_ESR 0x01
+#define MAL_ESR_EVB 0x80000000
+#define MAL_ESR_CIDT 0x40000000
+#define MAL_ESR_CID_MASK 0x3e000000
+#define MAL_ESR_CID_SHIFT 25
+#define MAL_ESR_DE 0x00100000
+#define MAL_ESR_OTE 0x00040000
+#define MAL_ESR_OSE 0x00020000
+#define MAL_ESR_PEIN 0x00010000
+#define MAL_ESR_DEI 0x00000010
+#define MAL_ESR_OTEI 0x00000004
+#define MAL_ESR_OSEI 0x00000002
+#define MAL_ESR_PBEI 0x00000001
+#if MAL_VERSION == 1
+#define MAL_ESR_ONE 0x00080000
+#define MAL_ESR_ONEI 0x00000008
+#elif MAL_VERSION == 2
+#define MAL_ESR_PTE 0x00800000
+#define MAL_ESR_PRE 0x00400000
+#define MAL_ESR_PWE 0x00200000
+#define MAL_ESR_PTEI 0x00000080
+#define MAL_ESR_PREI 0x00000040
+#define MAL_ESR_PWEI 0x00000020
+#else
+#error "Unknown MAL version"
+#endif
+
+#define MAL_IER 0x02
+#define MAL_IER_DE 0x00000010
+#define MAL_IER_OTE 0x00000004
+#define MAL_IER_OE 0x00000002
+#define MAL_IER_PE 0x00000001
+#if MAL_VERSION == 1
+#define MAL_IER_NWE 0x00000008
+#define MAL_IER_SOC_EVENTS MAL_IER_NWE
+#elif MAL_VERSION == 2
+#define MAL_IER_PT 0x00000080
+#define MAL_IER_PRE 0x00000040
+#define MAL_IER_PWE 0x00000020
+#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
+#else
+#error "Unknown MAL version"
+#endif
+#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
+ MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
+
+#define MAL_TXCASR 0x04
+#define MAL_TXCARR 0x05
+#define MAL_TXEOBISR 0x06
+#define MAL_TXDEIR 0x07
+#define MAL_RXCASR 0x10
+#define MAL_RXCARR 0x11
+#define MAL_RXEOBISR 0x12
+#define MAL_RXDEIR 0x13
+#define MAL_TXCTPR(n) ((n) + 0x20)
+#define MAL_RXCTPR(n) ((n) + 0x40)
+#define MAL_RCBS(n) ((n) + 0x60)
+
+/* In reality MAL can handle TX buffers up to 4095 bytes long,
+ * but this isn't a good round number :) --ebs
+ */
+#define MAL_MAX_TX_SIZE 4080
+#define MAL_MAX_RX_SIZE 4080
+
+static inline int mal_rx_size(int len)
+{
+ len = (len + 0xf) & ~0xf;
+ return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
+}
+
+static inline int mal_tx_chunks(int len)
+{
+ return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
+}
+
+#define MAL_CHAN_MASK(n) (0x80000000 >> (n))
/* MAL Buffer Descriptor structure */
struct mal_descriptor {
- unsigned short ctrl; /* MAL / Commac status control bits */
- short data_len; /* Max length is 4K-1 (12 bits) */
- unsigned char *data_ptr; /* pointer to actual data buffer */
-} __attribute__ ((packed));
+ u16 ctrl; /* MAL / Commac status control bits */
+ u16 data_len; /* Max length is 4K-1 (12 bits) */
+ u32 data_ptr; /* pointer to actual data buffer */
+};
/* the following defines are for the MadMAL status and control registers. */
/* MADMAL transmit and receive status/control bits */
-#define MAL_RX_CTRL_EMPTY 0x8000
-#define MAL_RX_CTRL_WRAP 0x4000
-#define MAL_RX_CTRL_CM 0x2000
-#define MAL_RX_CTRL_LAST 0x1000
-#define MAL_RX_CTRL_FIRST 0x0800
-#define MAL_RX_CTRL_INTR 0x0400
+#define MAL_RX_CTRL_EMPTY 0x8000
+#define MAL_RX_CTRL_WRAP 0x4000
+#define MAL_RX_CTRL_CM 0x2000
+#define MAL_RX_CTRL_LAST 0x1000
+#define MAL_RX_CTRL_FIRST 0x0800
+#define MAL_RX_CTRL_INTR 0x0400
+#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
+#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
-#define MAL_TX_CTRL_READY 0x8000
-#define MAL_TX_CTRL_WRAP 0x4000
-#define MAL_TX_CTRL_CM 0x2000
-#define MAL_TX_CTRL_LAST 0x1000
-#define MAL_TX_CTRL_INTR 0x0400
+#define MAL_TX_CTRL_READY 0x8000
+#define MAL_TX_CTRL_WRAP 0x4000
+#define MAL_TX_CTRL_CM 0x2000
+#define MAL_TX_CTRL_LAST 0x1000
+#define MAL_TX_CTRL_INTR 0x0400
struct mal_commac_ops {
- void (*txeob) (void *dev, u32 chanmask);
- void (*txde) (void *dev, u32 chanmask);
- void (*rxeob) (void *dev, u32 chanmask);
- void (*rxde) (void *dev, u32 chanmask);
+ void (*poll_tx) (void *dev);
+ int (*poll_rx) (void *dev, int budget);
+ int (*peek_rx) (void *dev);
+ void (*rxde) (void *dev);
};
struct mal_commac {
- struct mal_commac_ops *ops;
- void *dev;
- u32 tx_chan_mask, rx_chan_mask;
- struct list_head list;
+ struct mal_commac_ops *ops;
+ void *dev;
+ struct list_head poll_list;
+ int rx_stopped;
+
+ u32 tx_chan_mask;
+ u32 rx_chan_mask;
+ struct list_head list;
};
struct ibm_ocp_mal {
- int dcrbase;
+ int dcrbase;
- struct list_head commac;
- u32 tx_chan_mask, rx_chan_mask;
+ struct list_head poll_list;
+ struct net_device poll_dev;
- dma_addr_t tx_phys_addr;
- struct mal_descriptor *tx_virt_addr;
+ struct list_head list;
+ u32 tx_chan_mask;
+ u32 rx_chan_mask;
- dma_addr_t rx_phys_addr;
- struct mal_descriptor *rx_virt_addr;
+ dma_addr_t bd_dma;
+ struct mal_descriptor *bd_virt;
+
+ struct ocp_def *def;
};
-#define GET_MAL_STANZA(base,dcrn) \
- case base: \
- x = mfdcr(dcrn(base)); \
- break;
-
-#define SET_MAL_STANZA(base,dcrn, val) \
- case base: \
- mtdcr(dcrn(base), (val)); \
- break;
-
-#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn)
-#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val)
-
-#ifdef DCRN_MAL1_BASE
-#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn)
-#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val)
-#else /* ! DCRN_MAL1_BASE */
-#define GET_MAL1_STANZA(dcrn)
-#define SET_MAL1_STANZA(dcrn,val)
-#endif
-
-#define get_mal_dcrn(mal, dcrn) ({ \
- u32 x; \
- switch ((mal)->dcrbase) { \
- GET_MAL0_STANZA(dcrn) \
- GET_MAL1_STANZA(dcrn) \
- default: \
- x = 0; \
- BUG(); \
- } \
-x; })
-
-#define set_mal_dcrn(mal, dcrn, val) do { \
- switch ((mal)->dcrbase) { \
- SET_MAL0_STANZA(dcrn,val) \
- SET_MAL1_STANZA(dcrn,val) \
- default: \
- BUG(); \
- } } while (0)
-
-static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
+static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
{
- set_mal_dcrn(mal, DCRN_MALTXCASR,
- get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask);
+ return mfdcr(mal->dcrbase + reg);
}
-static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal,
- u32 chanmask)
+static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
{
- set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask);
+ mtdcr(mal->dcrbase + reg, val);
}
-static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask)
-{
- set_mal_dcrn(mal, DCRN_MALRXCASR,
- get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask);
-}
+/* Register MAL devices */
+int mal_init(void) __init;
+void mal_exit(void) __exit;
-static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal,
- u32 chanmask)
-{
- set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask);
-}
+int mal_register_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac) __init;
+void mal_unregister_commac(struct ibm_ocp_mal *mal,
+ struct mal_commac *commac) __exit;
+int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
-extern int mal_register_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac);
-extern int mal_unregister_commac(struct ibm_ocp_mal *mal,
- struct mal_commac *commac);
+/* Returns BD ring offset for a particular channel
+ (in 'struct mal_descriptor' elements)
+*/
+int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
+int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
-extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel,
- unsigned long size);
+void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
+void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
-#endif /* _IBM_EMAC_MAL_H */
+/* Add/remove EMAC to/from MAL polling list */
+void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
+
+/* Ethtool MAL registers */
+struct ibm_mal_regs {
+ u32 tx_count;
+ u32 rx_count;
+
+ u32 cfg;
+ u32 esr;
+ u32 ier;
+ u32 tx_casr;
+ u32 tx_carr;
+ u32 tx_eobisr;
+ u32 tx_deir;
+ u32 rx_casr;
+ u32 rx_carr;
+ u32 rx_eobisr;
+ u32 rx_deir;
+ u32 tx_ctpr[32];
+ u32 rx_ctpr[32];
+ u32 rcbs[32];
+};
+
+int mal_get_regs_len(struct ibm_ocp_mal *mal);
+void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
+
+#endif /* __IBM_EMAC_MAL_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
index 14213f0..a27e49c 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ b/drivers/net/ibm_emac/ibm_emac_phy.c
@@ -1,61 +1,256 @@
/*
- * ibm_ocp_phy.c
+ * drivers/net/ibm_emac/ibm_emac_phy.c
*
- * PHY drivers for the ibm ocp ethernet driver. Borrowed
- * from sungem_phy.c, though I only kept the generic MII
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
+ * Borrowed from sungem_phy.c, though I only kept the generic MII
* driver for now.
*
* This file should be shared with other drivers or eventually
* merged as the "low level" part of miilib
*
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
*
*/
-
#include <linux/config.h>
-
#include <linux/module.h>
-
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
+#include <asm/ocp.h>
+
#include "ibm_emac_phy.h"
-static int reset_one_mii_phy(struct mii_phy *phy, int phy_id)
+static inline int phy_read(struct mii_phy *phy, int reg)
{
- u16 val;
+ return phy->mdio_read(phy->dev, phy->address, reg);
+}
+
+static inline void phy_write(struct mii_phy *phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->address, reg, val);
+}
+
+int mii_reset_phy(struct mii_phy *phy)
+{
+ int val;
int limit = 10000;
- val = __phy_read(phy, phy_id, MII_BMCR);
+ val = phy_read(phy, MII_BMCR);
val &= ~BMCR_ISOLATE;
val |= BMCR_RESET;
- __phy_write(phy, phy_id, MII_BMCR, val);
+ phy_write(phy, MII_BMCR, val);
- udelay(100);
+ udelay(300);
while (limit--) {
- val = __phy_read(phy, phy_id, MII_BMCR);
- if ((val & BMCR_RESET) == 0)
+ val = phy_read(phy, MII_BMCR);
+ if (val >= 0 && (val & BMCR_RESET) == 0)
break;
udelay(10);
}
if ((val & BMCR_ISOLATE) && limit > 0)
- __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+ phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
- return (limit <= 0);
+ return limit <= 0;
}
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ int ctl, adv;
+
+ phy->autoneg = AUTONEG_ENABLE;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ adv = phy_read(phy, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if (advertise & ADVERTISED_1000baseT_Full)
+ adv |= ADVERTISE_1000FULL;
+ if (advertise & ADVERTISED_1000baseT_Half)
+ adv |= ADVERTISE_1000HALF;
+ phy_write(phy, MII_CTRL1000, adv);
+ }
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ int ctl;
+
+ phy->autoneg = AUTONEG_DISABLE;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = phy->asym_pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
+
+ /* First reset the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch (speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ ctl |= BMCR_SPEED1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+ int status;
+
+ /* Clear latched value with dummy read */
+ phy_read(phy, MII_BMSR);
+ status = phy_read(phy, MII_BMSR);
+ if (status < 0 || (status & BMSR_LSTATUS) == 0)
+ return 0;
+ if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
+ return 0;
+ return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+ if (phy->autoneg == AUTONEG_ENABLE) {
+ int glpa = 0;
+ int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
+ if (lpa < 0)
+ return lpa;
+
+ if (phy->features &
+ (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
+ int adv = phy_read(phy, MII_CTRL1000);
+ glpa = phy_read(phy, MII_STAT1000);
+
+ if (glpa < 0 || adv < 0)
+ return adv;
+
+ glpa &= adv << 2;
+ }
+
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
+
+ if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
+ phy->speed = SPEED_1000;
+ if (glpa & LPA_1000FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phy->speed = SPEED_100;
+ if (lpa & LPA_100FULL)
+ phy->duplex = DUPLEX_FULL;
+ } else if (lpa & LPA_10FULL)
+ phy->duplex = DUPLEX_FULL;
+
+ if (phy->duplex == DUPLEX_FULL) {
+ phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phy, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ phy->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+
+ phy->pause = phy->asym_pause = 0;
+ }
+ return 0;
+}
+
+/* Generic implementation for most 10/100/1000 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .ops = &generic_phy_ops
+};
+
+/* CIS8201 */
+#define MII_CIS8201_EPCR 0x17
+#define EPCR_MODE_MASK 0x3000
+#define EPCR_GMII_MODE 0x0000
+#define EPCR_RGMII_MODE 0x1000
+#define EPCR_TBI_MODE 0x2000
+#define EPCR_RTBI_MODE 0x3000
+
static int cis8201_init(struct mii_phy *phy)
{
- u16 epcr;
+ int epcr;
epcr = phy_read(phy, MII_CIS8201_EPCR);
+ if (epcr < 0)
+ return epcr;
+
epcr &= ~EPCR_MODE_MASK;
switch (phy->mode) {
@@ -78,178 +273,19 @@
return 0;
}
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE);
-
- /* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
-
- /* Select speed & duplex */
- switch (speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- default:
- return -EINVAL;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
- u16 status;
-
- (void)phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- return 0;
- if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return 0;
- return 1;
-}
-
-#define MII_CIS8201_ACSR 0x1c
-#define ACSR_DUPLEX_STATUS 0x0020
-#define ACSR_SPEED_1000BASET 0x0010
-#define ACSR_SPEED_100BASET 0x0008
-
-static int cis8201_read_link(struct mii_phy *phy)
-{
- u16 acsr;
-
- if (phy->autoneg) {
- acsr = phy_read(phy, MII_CIS8201_ACSR);
-
- if (acsr & ACSR_DUPLEX_STATUS)
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- if (acsr & ACSR_SPEED_1000BASET) {
- phy->speed = SPEED_1000;
- } else if (acsr & ACSR_SPEED_100BASET)
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
- phy->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
- u16 lpa;
-
- if (phy->autoneg) {
- lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
-
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
-
- if (lpa & (LPA_100FULL | LPA_100HALF)) {
- phy->speed = SPEED_100;
- if (lpa & LPA_100FULL)
- phy->duplex = DUPLEX_FULL;
- } else if (lpa & LPA_10FULL)
- phy->duplex = DUPLEX_FULL;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
-#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
-
-/* CIS8201 phy ops */
static struct mii_phy_ops cis8201_phy_ops = {
- init:cis8201_init,
- setup_aneg:genmii_setup_aneg,
- setup_forced:genmii_setup_forced,
- poll_link:genmii_poll_link,
- read_link:cis8201_read_link
-};
-
-/* Generic implementation for most 10/100 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
- setup_aneg:genmii_setup_aneg,
- setup_forced:genmii_setup_forced,
- poll_link:genmii_poll_link,
- read_link:genmii_read_link
+ .init = cis8201_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
};
static struct mii_phy_def cis8201_phy_def = {
- phy_id:0x000fc410,
- phy_id_mask:0x000ffff0,
- name:"CIS8201 Gigabit Ethernet",
- features:MII_GBIT_FEATURES,
- magic_aneg:0,
- ops:&cis8201_phy_ops
-};
-
-static struct mii_phy_def genmii_phy_def = {
- phy_id:0x00000000,
- phy_id_mask:0x00000000,
- name:"Generic MII",
- features:MII_BASIC_FEATURES,
- magic_aneg:0,
- ops:&generic_phy_ops
+ .phy_id = 0x000fc410,
+ .phy_id_mask = 0x000ffff0,
+ .name = "CIS8201 Gigabit Ethernet",
+ .ops = &cis8201_phy_ops
};
static struct mii_phy_def *mii_phy_table[] = {
@@ -258,39 +294,60 @@
NULL
};
-int mii_phy_probe(struct mii_phy *phy, int mii_id)
+int mii_phy_probe(struct mii_phy *phy, int address)
{
- int rc;
- u32 id;
struct mii_phy_def *def;
int i;
+ u32 id;
- phy->autoneg = 0;
+ phy->autoneg = AUTONEG_DISABLE;
phy->advertising = 0;
- phy->mii_id = mii_id;
- phy->speed = 0;
- phy->duplex = 0;
- phy->pause = 0;
+ phy->address = address;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = phy->asym_pause = 0;
- /* Take PHY out of isloate mode and reset it. */
- rc = reset_one_mii_phy(phy, mii_id);
- if (rc)
+ /* Take PHY out of isolate mode and reset it. */
+ if (mii_reset_phy(phy))
return -ENODEV;
/* Read ID and find matching entry */
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
- & 0xfffffff0;
+ id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;
/* Should never be NULL (we have a generic entry), but... */
- if (def == NULL)
+ if (!def)
return -ENODEV;
phy->def = def;
+ /* Determine PHY features if needed */
+ phy->features = def->features;
+ if (!phy->features) {
+ u16 bmsr = phy_read(phy, MII_BMSR);
+ if (bmsr & BMSR_ANEGCAPABLE)
+ phy->features |= SUPPORTED_Autoneg;
+ if (bmsr & BMSR_10HALF)
+ phy->features |= SUPPORTED_10baseT_Half;
+ if (bmsr & BMSR_10FULL)
+ phy->features |= SUPPORTED_10baseT_Full;
+ if (bmsr & BMSR_100HALF)
+ phy->features |= SUPPORTED_100baseT_Half;
+ if (bmsr & BMSR_100FULL)
+ phy->features |= SUPPORTED_100baseT_Full;
+ if (bmsr & BMSR_ESTATEN) {
+ u16 esr = phy_read(phy, MII_ESTATUS);
+ if (esr & ESTATUS_1000_TFULL)
+ phy->features |= SUPPORTED_1000baseT_Full;
+ if (esr & ESTATUS_1000_THALF)
+ phy->features |= SUPPORTED_1000baseT_Half;
+ }
+ phy->features |= SUPPORTED_MII;
+ }
+
/* Setup default advertising */
- phy->advertising = def->features;
+ phy->advertising = phy->features;
return 0;
}
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
index 61afbea..a70e0fe 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ b/drivers/net/ibm_emac/ibm_emac_phy.h
@@ -1,65 +1,25 @@
-
/*
- * ibm_emac_phy.h
+ * drivers/net/ibm_emac/ibm_emac_phy.h
*
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
*
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * February 2003
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * February 2003
+ *
+ * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
*
* This file basically duplicates sungem_phy.{c,h} with different PHYs
* supported. I'm looking into merging that in a single mii layer more
* flexible than mii.c
*/
-#ifndef _IBM_EMAC_PHY_H_
-#define _IBM_EMAC_PHY_H_
-
-/*
- * PHY mode settings
- * Used for multi-mode capable PHYs
- */
-#define PHY_MODE_NA 0
-#define PHY_MODE_MII 1
-#define PHY_MODE_RMII 2
-#define PHY_MODE_SMII 3
-#define PHY_MODE_RGMII 4
-#define PHY_MODE_TBI 5
-#define PHY_MODE_GMII 6
-#define PHY_MODE_RTBI 7
-#define PHY_MODE_SGMII 8
-
-/*
- * PHY specific registers/values
- */
-
-/* CIS8201 */
-#define MII_CIS8201_EPCR 0x17
-#define EPCR_MODE_MASK 0x3000
-#define EPCR_GMII_MODE 0x0000
-#define EPCR_RGMII_MODE 0x1000
-#define EPCR_TBI_MODE 0x2000
-#define EPCR_RTBI_MODE 0x3000
+#ifndef _IBM_OCP_PHY_H_
+#define _IBM_OCP_PHY_H_
struct mii_phy;
@@ -77,7 +37,8 @@
struct mii_phy_def {
u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
u32 phy_id_mask; /* Significant bits */
- u32 features; /* Ethtool SUPPORTED_* defines */
+ u32 features; /* Ethtool SUPPORTED_* defines or
+ 0 for autodetect */
int magic_aneg; /* Autoneg does all speed test for us */
const char *name;
const struct mii_phy_ops *ops;
@@ -86,8 +47,11 @@
/* An instance of a PHY, partially borrowed from mii_if_info */
struct mii_phy {
struct mii_phy_def *def;
- int advertising;
- int mii_id;
+ u32 advertising; /* Ethtool ADVERTISED_* defines */
+ u32 features; /* Copied from mii_phy_def.features
+ or determined automaticaly */
+ int address; /* PHY address */
+ int mode; /* PHY mode */
/* 1: autoneg enabled, 0: disabled */
int autoneg;
@@ -98,40 +62,19 @@
int speed;
int duplex;
int pause;
-
- /* PHY mode - if needed */
- int mode;
+ int asym_pause;
/* Provided by host chip */
struct net_device *dev;
- int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
- void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
+ int (*mdio_read) (struct net_device * dev, int addr, int reg);
+ void (*mdio_write) (struct net_device * dev, int addr, int reg,
int val);
};
/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
* filled, the remaining fields will be filled on return
*/
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
+int mii_phy_probe(struct mii_phy *phy, int address);
+int mii_reset_phy(struct mii_phy *phy);
-static inline int __phy_read(struct mii_phy *phy, int id, int reg)
-{
- return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
-{
- phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
- return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
- phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
-
-#endif /* _IBM_EMAC_PHY_H_ */
+#endif /* _IBM_OCP_PHY_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c
new file mode 100644
index 0000000..f0b1ffb
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c
@@ -0,0 +1,201 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* RGMIIx_FER */
+#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4))
+#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4))
+#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4))
+#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4))
+#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4))
+
+/* RGMIIx_SSR */
+#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8))
+#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8))
+#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8))
+
+/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
+static inline int rgmii_valid_mode(int phy_mode)
+{
+ return phy_mode == PHY_MODE_GMII ||
+ phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_TBI ||
+ phy_mode == PHY_MODE_RTBI;
+}
+
+static inline const char *rgmii_mode_name(int mode)
+{
+ switch (mode) {
+ case PHY_MODE_RGMII:
+ return "RGMII";
+ case PHY_MODE_TBI:
+ return "TBI";
+ case PHY_MODE_GMII:
+ return "GMII";
+ case PHY_MODE_RTBI:
+ return "RTBI";
+ default:
+ BUG();
+ }
+}
+
+static inline u32 rgmii_mode_mask(int mode, int input)
+{
+ switch (mode) {
+ case PHY_MODE_RGMII:
+ return RGMII_FER_RGMII(input);
+ case PHY_MODE_TBI:
+ return RGMII_FER_TBI(input);
+ case PHY_MODE_GMII:
+ return RGMII_FER_GMII(input);
+ case PHY_MODE_RTBI:
+ return RGMII_FER_RTBI(input);
+ default:
+ BUG();
+ }
+}
+
+static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ struct rgmii_regs *p;
+
+ RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
+
+ if (!dev) {
+ dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "rgmii%d: couldn't allocate device structure!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+
+ p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
+ sizeof(struct rgmii_regs));
+ if (!p) {
+ printk(KERN_ERR
+ "rgmii%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ kfree(dev);
+ return -ENOMEM;
+ }
+
+ dev->base = p;
+ ocp_set_drvdata(ocpdev, dev);
+
+ /* Disable all inputs by default */
+ out_be32(&p->fer, 0);
+ } else
+ p = dev->base;
+
+ /* Enable this input */
+ out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
+
+ printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
+ ocpdev->def->index, input, rgmii_mode_name(mode));
+
+ ++dev->users;
+ return 0;
+}
+
+int __init rgmii_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ /* Check if we need to attach to a RGMII */
+ if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
+ dev->rgmii_input = emacdata->rgmii_mux;
+ dev->rgmii_dev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
+ emacdata->rgmii_idx);
+ if (!dev->rgmii_dev) {
+ printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
+ dev->def->index, emacdata->rgmii_idx);
+ return -ENODEV;
+ }
+ if (rgmii_init
+ (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
+ printk(KERN_ERR
+ "emac%d: rgmii%d initialization failed!\n",
+ dev->def->index, emacdata->rgmii_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
+
+ RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+ if (speed == SPEED_1000)
+ ssr |= RGMII_SSR_1000(input);
+ else if (speed == SPEED_100)
+ ssr |= RGMII_SSR_100(input);
+
+ out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ BUG_ON(!dev || dev->users == 0);
+
+ RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+ /* Disable this input */
+ out_be32(&dev->base->fer,
+ in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
+
+ if (!--dev->users) {
+ /* Free everything if this is the last user */
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)dev->base);
+ kfree(dev);
+ }
+}
+
+int __rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct rgmii_regs);
+}
+
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h
index 49f188f..a1ffb8a 100644
--- a/drivers/net/ibm_emac/ibm_emac_rgmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h
@@ -1,5 +1,7 @@
/*
- * Defines for the IBM RGMII bridge
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
* Based on ocp_zmii.h/ibm_emac_zmii.h
* Armin Kuster akuster@mvista.com
@@ -7,6 +9,9 @@
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -19,47 +24,42 @@
#include <linux/config.h>
/* RGMII bridge */
-typedef struct rgmii_regs {
+struct rgmii_regs {
u32 fer; /* Function enable register */
u32 ssr; /* Speed select register */
-} rgmii_t;
-
-#define RGMII_INPUTS 4
+};
/* RGMII device */
struct ibm_ocp_rgmii {
struct rgmii_regs *base;
- int mode[RGMII_INPUTS];
int users; /* number of EMACs using this RGMII bridge */
};
-/* Fuctional Enable Reg */
-#define RGMII_FER_MASK(x) (0x00000007 << (4*x))
-#define RGMII_RTBI 0x00000004
-#define RGMII_RGMII 0x00000005
-#define RGMII_TBI 0x00000006
-#define RGMII_GMII 0x00000007
+#ifdef CONFIG_IBM_EMAC_RGMII
+int rgmii_attach(void *emac) __init;
-/* Speed Selection reg */
+void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __rgmii_fini(ocpdev, input);
+}
-#define RGMII_SP2_100 0x00000002
-#define RGMII_SP2_1000 0x00000004
-#define RGMII_SP3_100 0x00000200
-#define RGMII_SP3_1000 0x00000400
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
-#define RGMII_MII2_SPDMASK 0x00000007
-#define RGMII_MII3_SPDMASK 0x00000700
+int __rgmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
+}
-#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000
-#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100
-#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000)
-#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000
-#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100
-#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000)
-
-#define RTBI 0
-#define RGMII 1
-#define TBI 2
-#define GMII 3
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define rgmii_attach(x) 0
+# define rgmii_fini(x,y) ((void)0)
+# define rgmii_set_speed(x,y,z) ((void)0)
+# define rgmii_get_regs_len(x) 0
+# define rgmii_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_RGMII */
#endif /* _IBM_EMAC_RGMII_H_ */
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c
new file mode 100644
index 0000000..af08afc
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_tah.c
@@ -0,0 +1,111 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_tah.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
+ *
+ * Copyright 2004 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+
+static int __init tah_init(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p;
+
+ if (ocp_get_drvdata(ocpdev)) {
+ printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
+ return -EBUSY;
+ }
+
+ /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
+ p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
+ if (!p) {
+ printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ ocp_set_drvdata(ocpdev, p);
+ __tah_reset(ocpdev);
+
+ return 0;
+}
+
+int __init tah_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ /* Check if we need to attach to a TAH */
+ if (emacdata->tah_idx >= 0) {
+ dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
+ emacdata->tah_idx);
+ if (!dev->tah_dev) {
+ printk(KERN_ERR "emac%d: unknown tah%d!\n",
+ dev->def->index, emacdata->tah_idx);
+ return -ENODEV;
+ }
+ if (tah_init(dev->tah_dev)) {
+ printk(KERN_ERR
+ "emac%d: tah%d initialization failed!\n",
+ dev->def->index, emacdata->tah_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void __exit __tah_fini(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p = ocp_get_drvdata(ocpdev);
+ BUG_ON(!p);
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)p);
+}
+
+void __tah_reset(struct ocp_device *ocpdev)
+{
+ struct tah_regs *p = ocp_get_drvdata(ocpdev);
+ int n;
+
+ /* Reset TAH */
+ out_be32(&p->mr, TAH_MR_SR);
+ n = 100;
+ while ((in_be32(&p->mr) & TAH_MR_SR) && n)
+ --n;
+
+ if (unlikely(!n))
+ printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
+
+ /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+ out_be32(&p->mr,
+ TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
+ TAH_MR_DIG);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct tah_regs);
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct tah_regs *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev, sizeof(struct tah_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h
index ecfc698..9299b5d 100644
--- a/drivers/net/ibm_emac/ibm_emac_tah.h
+++ b/drivers/net/ibm_emac/ibm_emac_tah.h
@@ -1,9 +1,13 @@
/*
- * Defines for the IBM TAH
+ * drivers/net/ibm_emac/ibm_emac_tah.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -13,36 +17,72 @@
#ifndef _IBM_EMAC_TAH_H
#define _IBM_EMAC_TAH_H
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+
/* TAH */
-typedef struct tah_regs {
- u32 tah_revid;
+struct tah_regs {
+ u32 revid;
u32 pad[3];
- u32 tah_mr;
- u32 tah_ssr0;
- u32 tah_ssr1;
- u32 tah_ssr2;
- u32 tah_ssr3;
- u32 tah_ssr4;
- u32 tah_ssr5;
- u32 tah_tsr;
-} tah_t;
+ u32 mr;
+ u32 ssr0;
+ u32 ssr1;
+ u32 ssr2;
+ u32 ssr3;
+ u32 ssr4;
+ u32 ssr5;
+ u32 tsr;
+};
/* TAH engine */
-#define TAH_MR_CVR 0x80000000
-#define TAH_MR_SR 0x40000000
-#define TAH_MR_ST_256 0x01000000
-#define TAH_MR_ST_512 0x02000000
-#define TAH_MR_ST_768 0x03000000
-#define TAH_MR_ST_1024 0x04000000
-#define TAH_MR_ST_1280 0x05000000
-#define TAH_MR_ST_1536 0x06000000
-#define TAH_MR_TFS_16KB 0x00000000
-#define TAH_MR_TFS_2KB 0x00200000
-#define TAH_MR_TFS_4KB 0x00400000
-#define TAH_MR_TFS_6KB 0x00600000
-#define TAH_MR_TFS_8KB 0x00800000
-#define TAH_MR_TFS_10KB 0x00a00000
-#define TAH_MR_DTFP 0x00100000
-#define TAH_MR_DIG 0x00080000
+#define TAH_MR_CVR 0x80000000
+#define TAH_MR_SR 0x40000000
+#define TAH_MR_ST_256 0x01000000
+#define TAH_MR_ST_512 0x02000000
+#define TAH_MR_ST_768 0x03000000
+#define TAH_MR_ST_1024 0x04000000
+#define TAH_MR_ST_1280 0x05000000
+#define TAH_MR_ST_1536 0x06000000
+#define TAH_MR_TFS_16KB 0x00000000
+#define TAH_MR_TFS_2KB 0x00200000
+#define TAH_MR_TFS_4KB 0x00400000
+#define TAH_MR_TFS_6KB 0x00600000
+#define TAH_MR_TFS_8KB 0x00800000
+#define TAH_MR_TFS_10KB 0x00a00000
+#define TAH_MR_DTFP 0x00100000
+#define TAH_MR_DIG 0x00080000
+
+#ifdef CONFIG_IBM_EMAC_TAH
+int tah_attach(void *emac) __init;
+
+void __tah_fini(struct ocp_device *ocpdev) __exit;
+static inline void tah_fini(struct ocp_device *ocpdev)
+{
+ if (ocpdev)
+ __tah_fini(ocpdev);
+}
+
+void __tah_reset(struct ocp_device *ocpdev);
+static inline void tah_reset(struct ocp_device *ocpdev)
+{
+ if (ocpdev)
+ __tah_reset(ocpdev);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev);
+static inline int tah_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define tah_attach(x) 0
+# define tah_fini(x) ((void)0)
+# define tah_reset(x) ((void)0)
+# define tah_get_regs_len(x) 0
+# define tah_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_TAH */
#endif /* _IBM_EMAC_TAH_H */
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c
new file mode 100644
index 0000000..35c1185
--- /dev/null
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.c
@@ -0,0 +1,255 @@
+/*
+ * drivers/net/ibm_emac/ibm_emac_zmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* ZMIIx_FER */
+#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
+#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
+ ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
+
+#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
+#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
+#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
+
+/* ZMIIx_SSR */
+#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
+#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
+#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
+
+/* ZMII only supports MII, RMII and SMII
+ * we also support autodetection for backward compatibility
+ */
+static inline int zmii_valid_mode(int mode)
+{
+ return mode == PHY_MODE_MII ||
+ mode == PHY_MODE_RMII ||
+ mode == PHY_MODE_SMII ||
+ mode == PHY_MODE_NA;
+}
+
+static inline const char *zmii_mode_name(int mode)
+{
+ switch (mode) {
+ case PHY_MODE_MII:
+ return "MII";
+ case PHY_MODE_RMII:
+ return "RMII";
+ case PHY_MODE_SMII:
+ return "SMII";
+ default:
+ BUG();
+ }
+}
+
+static inline u32 zmii_mode_mask(int mode, int input)
+{
+ switch (mode) {
+ case PHY_MODE_MII:
+ return ZMII_FER_MII(input);
+ case PHY_MODE_RMII:
+ return ZMII_FER_RMII(input);
+ case PHY_MODE_SMII:
+ return ZMII_FER_SMII(input);
+ default:
+ return 0;
+ }
+}
+
+static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ struct zmii_regs *p;
+
+ ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
+
+ if (!dev) {
+ dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR
+ "zmii%d: couldn't allocate device structure!\n",
+ ocpdev->def->index);
+ return -ENOMEM;
+ }
+ dev->mode = PHY_MODE_NA;
+
+ p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
+ sizeof(struct zmii_regs));
+ if (!p) {
+ printk(KERN_ERR
+ "zmii%d: could not ioremap device registers!\n",
+ ocpdev->def->index);
+ kfree(dev);
+ return -ENOMEM;
+ }
+ dev->base = p;
+ ocp_set_drvdata(ocpdev, dev);
+
+ /* We may need FER value for autodetection later */
+ dev->fer_save = in_be32(&p->fer);
+
+ /* Disable all inputs by default */
+ out_be32(&p->fer, 0);
+ } else
+ p = dev->base;
+
+ if (!zmii_valid_mode(*mode)) {
+ /* Probably an EMAC connected to RGMII,
+ * but it still may need ZMII for MDIO
+ */
+ goto out;
+ }
+
+ /* Autodetect ZMII mode if not specified.
+ * This is only for backward compatibility with the old driver.
+ * Please, always specify PHY mode in your board port to avoid
+ * any surprises.
+ */
+ if (dev->mode == PHY_MODE_NA) {
+ if (*mode == PHY_MODE_NA) {
+ u32 r = dev->fer_save;
+
+ ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
+ ocpdev->def->index, r);
+
+ if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
+ dev->mode = PHY_MODE_MII;
+ else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
+ dev->mode = PHY_MODE_RMII;
+ else
+ dev->mode = PHY_MODE_SMII;
+ } else
+ dev->mode = *mode;
+
+ printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
+ ocpdev->def->index, zmii_mode_name(dev->mode));
+ } else {
+ /* All inputs must use the same mode */
+ if (*mode != PHY_MODE_NA && *mode != dev->mode) {
+ printk(KERN_ERR
+ "zmii%d: invalid mode %d specified for input %d\n",
+ ocpdev->def->index, *mode, input);
+ return -EINVAL;
+ }
+ }
+
+ /* Report back correct PHY mode,
+ * it may be used during PHY initialization.
+ */
+ *mode = dev->mode;
+
+ /* Enable this input */
+ out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
+ out:
+ ++dev->users;
+ return 0;
+}
+
+int __init zmii_attach(void *emac)
+{
+ struct ocp_enet_private *dev = emac;
+ struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+ if (emacdata->zmii_idx >= 0) {
+ dev->zmii_input = emacdata->zmii_mux;
+ dev->zmii_dev =
+ ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
+ emacdata->zmii_idx);
+ if (!dev->zmii_dev) {
+ printk(KERN_ERR "emac%d: unknown zmii%d!\n",
+ dev->def->index, emacdata->zmii_idx);
+ return -ENODEV;
+ }
+ if (zmii_init
+ (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
+ printk(KERN_ERR
+ "emac%d: zmii%d initialization failed!\n",
+ dev->def->index, emacdata->zmii_idx);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
+
+ ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
+
+ out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
+}
+
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ u32 ssr = in_be32(&dev->base->ssr);
+
+ ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+ if (speed == SPEED_100)
+ ssr |= ZMII_SSR_SP(input);
+ else
+ ssr &= ~ZMII_SSR_SP(input);
+
+ out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __zmii_fini(struct ocp_device *ocpdev, int input)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ BUG_ON(!dev || dev->users == 0);
+
+ ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+ /* Disable this input */
+ out_be32(&dev->base->fer,
+ in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
+
+ if (!--dev->users) {
+ /* Free everything if this is the last user */
+ ocp_set_drvdata(ocpdev, NULL);
+ iounmap((void *)dev->base);
+ kfree(dev);
+ }
+}
+
+int __zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return sizeof(struct emac_ethtool_regs_subhdr) +
+ sizeof(struct zmii_regs);
+}
+
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+ struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+ struct emac_ethtool_regs_subhdr *hdr = buf;
+ struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
+
+ hdr->version = 0;
+ hdr->index = ocpdev->def->index;
+ memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
+ return regs + 1;
+}
diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h
index 6f6cd2a..0bb2606 100644
--- a/drivers/net/ibm_emac/ibm_emac_zmii.h
+++ b/drivers/net/ibm_emac/ibm_emac_zmii.h
@@ -1,23 +1,27 @@
/*
- * ocp_zmii.h
+ * drivers/net/ibm_emac/ibm_emac_zmii.h
*
- * Defines for the IBM ZMII bridge
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
- * Armin Kuster akuster@mvista.com
- * Dec, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
- * Copyright 2001 MontaVista Softare Inc.
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Copyright 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
*/
-
#ifndef _IBM_EMAC_ZMII_H_
#define _IBM_EMAC_ZMII_H_
#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
/* ZMII bridge registers */
struct zmii_regs {
@@ -26,68 +30,54 @@
u32 smiirs; /* SMII status reg */
};
-#define ZMII_INPUTS 4
-
/* ZMII device */
struct ibm_ocp_zmii {
struct zmii_regs *base;
- int mode[ZMII_INPUTS];
+ int mode; /* subset of PHY_MODE_XXXX */
int users; /* number of EMACs using this ZMII bridge */
+ u32 fer_save; /* FER value left by firmware */
};
-/* Fuctional Enable Reg */
+#ifdef CONFIG_IBM_EMAC_ZMII
+int zmii_attach(void *emac) __init;
-#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x))
+void __zmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void zmii_fini(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __zmii_fini(ocpdev, input);
+}
-#define ZMII_MDI0 0x80000000
-#define ZMII_SMII0 0x40000000
-#define ZMII_RMII0 0x20000000
-#define ZMII_MII0 0x10000000
-#define ZMII_MDI1 0x08000000
-#define ZMII_SMII1 0x04000000
-#define ZMII_RMII1 0x02000000
-#define ZMII_MII1 0x01000000
-#define ZMII_MDI2 0x00800000
-#define ZMII_SMII2 0x00400000
-#define ZMII_RMII2 0x00200000
-#define ZMII_MII2 0x00100000
-#define ZMII_MDI3 0x00080000
-#define ZMII_SMII3 0x00040000
-#define ZMII_RMII3 0x00020000
-#define ZMII_MII3 0x00010000
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
+static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+ if (ocpdev)
+ __zmii_enable_mdio(ocpdev, input);
+}
-/* Speed Selection reg */
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
+static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
+ int speed)
+{
+ if (ocpdev)
+ __zmii_set_speed(ocpdev, input, speed);
+}
-#define ZMII_SCI0 0x40000000
-#define ZMII_FSS0 0x20000000
-#define ZMII_SP0 0x10000000
-#define ZMII_SCI1 0x04000000
-#define ZMII_FSS1 0x02000000
-#define ZMII_SP1 0x01000000
-#define ZMII_SCI2 0x00400000
-#define ZMII_FSS2 0x00200000
-#define ZMII_SP2 0x00100000
-#define ZMII_SCI3 0x00040000
-#define ZMII_FSS3 0x00020000
-#define ZMII_SP3 0x00010000
+int __zmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+ return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
+}
-#define ZMII_MII0_100MB ZMII_SP0
-#define ZMII_MII0_10MB ~ZMII_SP0
-#define ZMII_MII1_100MB ZMII_SP1
-#define ZMII_MII1_10MB ~ZMII_SP1
-#define ZMII_MII2_100MB ZMII_SP2
-#define ZMII_MII2_10MB ~ZMII_SP2
-#define ZMII_MII3_100MB ZMII_SP3
-#define ZMII_MII3_10MB ~ZMII_SP3
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
-/* SMII Status reg */
-
-#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */
-#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */
-
-#define SMII 0
-#define RMII 1
-#define MII 2
-#define MDI 3
+#else
+# define zmii_attach(x) 0
+# define zmii_fini(x,y) ((void)0)
+# define zmii_enable_mdio(x,y) ((void)0)
+# define zmii_set_speed(x,y,z) ((void)0)
+# define zmii_get_regs_len(x) 0
+# define zmii_dump_regs(x,buf) (buf)
+#endif /* !CONFIG_IBM_EMAC_ZMII */
#endif /* _IBM_EMAC_ZMII_H_ */
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index a2c4dd4..36da54a 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -96,7 +96,7 @@
static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter);
static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter);
static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
-static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*);
+static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter);
#ifdef CONFIG_PROC_FS
#define IBMVETH_PROC_DIR "net/ibmveth"
@@ -181,6 +181,7 @@
atomic_set(&pool->available, 0);
pool->producer_index = 0;
pool->consumer_index = 0;
+ pool->active = 0;
return 0;
}
@@ -236,7 +237,7 @@
lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
if(lpar_rc != H_Success) {
- pool->free_map[free_index] = IBM_VETH_INVALID_MAP;
+ pool->free_map[free_index] = index;
pool->skbuff[index] = NULL;
pool->consumer_index--;
dma_unmap_single(&adapter->vdev->dev,
@@ -255,37 +256,19 @@
atomic_add(buffers_added, &(pool->available));
}
-/* check if replenishing is needed. */
-static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter)
-{
- return ((atomic_read(&adapter->rx_buff_pool[0].available) < adapter->rx_buff_pool[0].threshold) ||
- (atomic_read(&adapter->rx_buff_pool[1].available) < adapter->rx_buff_pool[1].threshold) ||
- (atomic_read(&adapter->rx_buff_pool[2].available) < adapter->rx_buff_pool[2].threshold));
-}
-
-/* kick the replenish tasklet if we need replenishing and it isn't already running */
-static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter)
-{
- if(ibmveth_is_replenishing_needed(adapter) &&
- (atomic_dec_if_positive(&adapter->not_replenishing) == 0)) {
- schedule_work(&adapter->replenish_task);
- }
-}
-
-/* replenish tasklet routine */
+/* replenish routine */
static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
{
+ int i;
+
adapter->replenish_task_cycles++;
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[0]);
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[1]);
- ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[2]);
+ for(i = 0; i < IbmVethNumBufferPools; i++)
+ if(adapter->rx_buff_pool[i].active)
+ ibmveth_replenish_buffer_pool(adapter,
+ &adapter->rx_buff_pool[i]);
adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8);
-
- atomic_inc(&adapter->not_replenishing);
-
- ibmveth_schedule_replenishing(adapter);
}
/* empty and free ana buffer pool - also used to do cleanup in error paths */
@@ -293,10 +276,8 @@
{
int i;
- if(pool->free_map) {
- kfree(pool->free_map);
- pool->free_map = NULL;
- }
+ kfree(pool->free_map);
+ pool->free_map = NULL;
if(pool->skbuff && pool->dma_addr) {
for(i = 0; i < pool->size; ++i) {
@@ -321,6 +302,7 @@
kfree(pool->skbuff);
pool->skbuff = NULL;
}
+ pool->active = 0;
}
/* remove a buffer from a pool */
@@ -379,6 +361,12 @@
ibmveth_assert(pool < IbmVethNumBufferPools);
ibmveth_assert(index < adapter->rx_buff_pool[pool].size);
+ if(!adapter->rx_buff_pool[pool].active) {
+ ibmveth_rxq_harvest_buffer(adapter);
+ ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]);
+ return;
+ }
+
desc.desc = 0;
desc.fields.valid = 1;
desc.fields.length = adapter->rx_buff_pool[pool].buff_size;
@@ -409,6 +397,8 @@
static void ibmveth_cleanup(struct ibmveth_adapter *adapter)
{
+ int i;
+
if(adapter->buffer_list_addr != NULL) {
if(!dma_mapping_error(adapter->buffer_list_dma)) {
dma_unmap_single(&adapter->vdev->dev,
@@ -443,26 +433,24 @@
adapter->rx_queue.queue_addr = NULL;
}
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[0]);
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[1]);
- ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[2]);
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[i]);
}
static int ibmveth_open(struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev->priv;
u64 mac_address = 0;
- int rxq_entries;
+ int rxq_entries = 1;
unsigned long lpar_rc;
int rc;
union ibmveth_buf_desc rxq_desc;
+ int i;
ibmveth_debug_printk("open starting\n");
- rxq_entries =
- adapter->rx_buff_pool[0].size +
- adapter->rx_buff_pool[1].size +
- adapter->rx_buff_pool[2].size + 1;
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ rxq_entries += adapter->rx_buff_pool[i].size;
adapter->buffer_list_addr = (void*) get_zeroed_page(GFP_KERNEL);
adapter->filter_list_addr = (void*) get_zeroed_page(GFP_KERNEL);
@@ -502,14 +490,8 @@
adapter->rx_queue.num_slots = rxq_entries;
adapter->rx_queue.toggle = 1;
- if(ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[0]) ||
- ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[1]) ||
- ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[2]))
- {
- ibmveth_error_printk("unable to allocate buffer pools\n");
- ibmveth_cleanup(adapter);
- return -ENOMEM;
- }
+ /* call change_mtu to init the buffer pools based in initial mtu */
+ ibmveth_change_mtu(netdev, netdev->mtu);
memcpy(&mac_address, netdev->dev_addr, netdev->addr_len);
mac_address = mac_address >> 16;
@@ -552,10 +534,10 @@
return rc;
}
- netif_start_queue(netdev);
+ ibmveth_debug_printk("initial replenish cycle\n");
+ ibmveth_replenish_task(adapter);
- ibmveth_debug_printk("scheduling initial replenish cycle\n");
- ibmveth_schedule_replenishing(adapter);
+ netif_start_queue(netdev);
ibmveth_debug_printk("open complete\n");
@@ -573,9 +555,6 @@
free_irq(netdev->irq, netdev);
- cancel_delayed_work(&adapter->replenish_task);
- flush_scheduled_work();
-
do {
lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
} while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy));
@@ -640,12 +619,18 @@
unsigned long lpar_rc;
int nfrags = 0, curfrag;
unsigned long correlator;
+ unsigned long flags;
unsigned int retry_count;
+ unsigned int tx_dropped = 0;
+ unsigned int tx_bytes = 0;
+ unsigned int tx_packets = 0;
+ unsigned int tx_send_failed = 0;
+ unsigned int tx_map_failed = 0;
+
if ((skb_shinfo(skb)->nr_frags + 1) > IbmVethMaxSendFrags) {
- adapter->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return 0;
+ tx_dropped++;
+ goto out;
}
memset(&desc, 0, sizeof(desc));
@@ -664,10 +649,9 @@
if(dma_mapping_error(desc[0].fields.address)) {
ibmveth_error_printk("tx: unable to map initial fragment\n");
- adapter->tx_map_failed++;
- adapter->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return 0;
+ tx_map_failed++;
+ tx_dropped++;
+ goto out;
}
curfrag = nfrags;
@@ -684,8 +668,8 @@
if(dma_mapping_error(desc[curfrag+1].fields.address)) {
ibmveth_error_printk("tx: unable to map fragment %d\n", curfrag);
- adapter->tx_map_failed++;
- adapter->stats.tx_dropped++;
+ tx_map_failed++;
+ tx_dropped++;
/* Free all the mappings we just created */
while(curfrag < nfrags) {
dma_unmap_single(&adapter->vdev->dev,
@@ -694,8 +678,7 @@
DMA_TO_DEVICE);
curfrag++;
}
- dev_kfree_skb(skb);
- return 0;
+ goto out;
}
}
@@ -720,11 +703,12 @@
ibmveth_error_printk("tx: desc[%i] valid=%d, len=%d, address=0x%d\n", i,
desc[i].fields.valid, desc[i].fields.length, desc[i].fields.address);
}
- adapter->tx_send_failed++;
- adapter->stats.tx_dropped++;
+ tx_send_failed++;
+ tx_dropped++;
} else {
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += skb->len;
+ tx_packets++;
+ tx_bytes += skb->len;
+ netdev->trans_start = jiffies;
}
do {
@@ -733,6 +717,14 @@
desc[nfrags].fields.length, DMA_TO_DEVICE);
} while(--nfrags >= 0);
+out: spin_lock_irqsave(&adapter->stats_lock, flags);
+ adapter->stats.tx_dropped += tx_dropped;
+ adapter->stats.tx_bytes += tx_bytes;
+ adapter->stats.tx_packets += tx_packets;
+ adapter->tx_send_failed += tx_send_failed;
+ adapter->tx_map_failed += tx_map_failed;
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+
dev_kfree_skb(skb);
return 0;
}
@@ -776,13 +768,14 @@
adapter->stats.rx_packets++;
adapter->stats.rx_bytes += length;
frames_processed++;
+ netdev->last_rx = jiffies;
}
} else {
more_work = 0;
}
} while(more_work && (frames_processed < max_frames_to_process));
- ibmveth_schedule_replenishing(adapter);
+ ibmveth_replenish_task(adapter);
if(more_work) {
/* more work to do - return that we are not done yet */
@@ -883,17 +876,54 @@
static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
{
- if ((new_mtu < 68) || (new_mtu > (1<<20)))
+ struct ibmveth_adapter *adapter = dev->priv;
+ int i;
+ int prev_smaller = 1;
+
+ if ((new_mtu < 68) ||
+ (new_mtu > (pool_size[IbmVethNumBufferPools-1]) - IBMVETH_BUFF_OH))
return -EINVAL;
+
+ for(i = 0; i<IbmVethNumBufferPools; i++) {
+ int activate = 0;
+ if (new_mtu > (pool_size[i] - IBMVETH_BUFF_OH)) {
+ activate = 1;
+ prev_smaller= 1;
+ } else {
+ if (prev_smaller)
+ activate = 1;
+ prev_smaller= 0;
+ }
+
+ if (activate && !adapter->rx_buff_pool[i].active) {
+ struct ibmveth_buff_pool *pool =
+ &adapter->rx_buff_pool[i];
+ if(ibmveth_alloc_buffer_pool(pool)) {
+ ibmveth_error_printk("unable to alloc pool\n");
+ return -ENOMEM;
+ }
+ adapter->rx_buff_pool[i].active = 1;
+ } else if (!activate && adapter->rx_buff_pool[i].active) {
+ adapter->rx_buff_pool[i].active = 0;
+ h_free_logical_lan_buffer(adapter->vdev->unit_address,
+ (u64)pool_size[i]);
+ }
+
+ }
+
+ /* kick the interrupt handler so that the new buffer pools get
+ replenished or deallocated */
+ ibmveth_interrupt(dev->irq, dev, NULL);
+
dev->mtu = new_mtu;
return 0;
}
static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
{
- int rc;
+ int rc, i;
struct net_device *netdev;
- struct ibmveth_adapter *adapter;
+ struct ibmveth_adapter *adapter = NULL;
unsigned char *mac_addr_p;
unsigned int *mcastFilterSize_p;
@@ -960,23 +990,21 @@
netdev->ethtool_ops = &netdev_ethtool_ops;
netdev->change_mtu = ibmveth_change_mtu;
SET_NETDEV_DEV(netdev, &dev->dev);
+ netdev->features |= NETIF_F_LLTX;
+ spin_lock_init(&adapter->stats_lock);
memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[0], 0, IbmVethPool0DftCnt, IbmVethPool0DftSize);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[1], 1, IbmVethPool1DftCnt, IbmVethPool1DftSize);
- ibmveth_init_buffer_pool(&adapter->rx_buff_pool[2], 2, IbmVethPool2DftCnt, IbmVethPool2DftSize);
+ for(i = 0; i<IbmVethNumBufferPools; i++)
+ ibmveth_init_buffer_pool(&adapter->rx_buff_pool[i], i,
+ pool_count[i], pool_size[i]);
ibmveth_debug_printk("adapter @ 0x%p\n", adapter);
- INIT_WORK(&adapter->replenish_task, (void*)ibmveth_replenish_task, (void*)adapter);
-
adapter->buffer_list_dma = DMA_ERROR_CODE;
adapter->filter_list_dma = DMA_ERROR_CODE;
adapter->rx_queue.queue_dma = DMA_ERROR_CODE;
- atomic_set(&adapter->not_replenishing, 1);
-
ibmveth_debug_printk("registering netdev...\n");
rc = register_netdev(netdev);
diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h
index 51a470d..46919a8 100644
--- a/drivers/net/ibmveth.h
+++ b/drivers/net/ibmveth.h
@@ -49,6 +49,7 @@
#define H_SEND_LOGICAL_LAN 0x120
#define H_MULTICAST_CTRL 0x130
#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
/* hcall macros */
#define h_register_logical_lan(ua, buflst, rxq, fltlst, mac) \
@@ -69,13 +70,15 @@
#define h_change_logical_lan_mac(ua, mac) \
plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac)
-#define IbmVethNumBufferPools 3
-#define IbmVethPool0DftSize (1024 * 2)
-#define IbmVethPool1DftSize (1024 * 4)
-#define IbmVethPool2DftSize (1024 * 10)
-#define IbmVethPool0DftCnt 256
-#define IbmVethPool1DftCnt 256
-#define IbmVethPool2DftCnt 256
+#define h_free_logical_lan_buffer(ua, bufsize) \
+ plpar_hcall_norets(H_FREE_LOGICAL_LAN_BUFFER, ua, bufsize)
+
+#define IbmVethNumBufferPools 5
+#define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */
+
+/* pool_size should be sorted */
+static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
+static int pool_count[] = { 256, 768, 256, 256, 256 };
#define IBM_VETH_INVALID_MAP ((u16)0xffff)
@@ -90,6 +93,7 @@
u16 *free_map;
dma_addr_t *dma_addr;
struct sk_buff **skbuff;
+ int active;
};
struct ibmveth_rx_q {
@@ -114,10 +118,6 @@
dma_addr_t filter_list_dma;
struct ibmveth_buff_pool rx_buff_pool[IbmVethNumBufferPools];
struct ibmveth_rx_q rx_queue;
- atomic_t not_replenishing;
-
- /* helper tasks */
- struct work_struct replenish_task;
/* adapter specific stats */
u64 replenish_task_cycles;
@@ -131,6 +131,7 @@
u64 tx_linearize_failed;
u64 tx_map_failed;
u64 tx_send_failed;
+ spinlock_t stats_lock;
};
struct ibmveth_buf_desc_fields {
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 0a08c53..0282771 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1695,11 +1695,9 @@
freebufs:
for (i = 0; i < TX_SLOTS; ++i)
- if (self->tx_bufs[i])
- kfree (self->tx_bufs[i]);
+ kfree (self->tx_bufs[i]);
for (i = 0; i < RX_SLOTS; ++i)
- if (self->rx_bufs[i])
- kfree (self->rx_bufs[i]);
+ kfree (self->rx_bufs[i]);
kfree(self->ringbuf);
freeregion:
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 6c766fd..c22c051 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1168,10 +1168,8 @@
unregister_netdev(self->netdev);
/* Remove the speed buffer */
- if (self->speed_buff != NULL) {
- kfree(self->speed_buff);
- self->speed_buff = NULL;
- }
+ kfree(self->speed_buff);
+ self->speed_buff = NULL;
}
/********************** USB CONFIG SUBROUTINES **********************/
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index 5971315..3d016a4 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -235,8 +235,7 @@
__FUNCTION__, self->io.sir_base);
release_region(self->io.sir_base, self->io.sir_ext);
- if (self->tx_buff.head)
- kfree(self->tx_buff.head);
+ kfree(self->tx_buff.head);
if (self->rx_buff.skb)
kfree_skb(self->rx_buff.skb);
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index efc5a88..df22b8b 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -490,8 +490,7 @@
{
if (dev->rx_buff.skb)
kfree_skb(dev->rx_buff.skb);
- if (dev->tx_buff.head)
- kfree(dev->tx_buff.head);
+ kfree(dev->tx_buff.head);
dev->rx_buff.head = dev->tx_buff.head = NULL;
dev->rx_buff.skb = NULL;
}
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 651c5a6..a9f49f0 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -473,8 +473,7 @@
rd_set_addr_status(rd, 0, 0);
if (busaddr)
pci_unmap_single(r->pdev, busaddr, r->len, r->dir);
- if (rd->buf)
- kfree(rd->buf);
+ kfree(rd->buf);
}
kfree(r);
return 0;
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index 81d0a26..09b1e7b 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -1035,10 +1035,8 @@
{
macio_unregister_driver(&mace_driver);
- if (dummy_buf) {
- kfree(dummy_buf);
- dummy_buf = NULL;
- }
+ kfree(dummy_buf);
+ dummy_buf = NULL;
}
MODULE_AUTHOR("Paul Mackerras");
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index e531a4e..d11821d 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -675,7 +675,6 @@
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
pci_enable_device(pdev);
- pci_set_master(pdev);
NS8390_init(dev, 1);
netif_device_attach(dev);
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 925d1df..bb42ff2 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -696,8 +696,7 @@
return;
for(i=0;i<TMDNUM;i++) {
- if(p->tmdbounce[i])
- kfree(p->tmdbounce[i]);
+ kfree(p->tmdbounce[i]);
#ifdef XMT_VIA_SKB
if(p->tmd_skb[i])
dev_kfree_skb(p->tmd_skb[i]);
@@ -710,12 +709,10 @@
if(p->recv_skb[i])
dev_kfree_skb(p->recv_skb[i]);
#else
- if(p->recvbounce[i])
- kfree(p->recvbounce[i]);
+ kfree(p->recvbounce[i]);
#endif
}
- if(p->self)
- kfree(p->self);
+ kfree(p->self);
}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9f22d138..818c185 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1020,6 +1020,12 @@
} else {
outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
}
+ } else if (info->flags & IS_DL10019) {
+ /* Advertise 100F, 100H, 10F, 10H */
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
+ /* Restart MII autonegotiation */
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
+ mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
}
}
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index ec1a18d1..19c2df9 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1710,10 +1710,8 @@
error = -EFAULT;
}
wf_out:
- if (oldimage)
- kfree(oldimage);
- if (image)
- kfree(image);
+ kfree(oldimage);
+ kfree(image);
return error;
case SIOCRRID:
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 62d5041..3f5e93a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -705,8 +705,7 @@
}
kfree(mac_control->rings[i].ba[j]);
}
- if (mac_control->rings[i].ba)
- kfree(mac_control->rings[i].ba);
+ kfree(mac_control->rings[i].ba);
}
#endif
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index fd01670..110e777 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -997,10 +997,7 @@
if (dev) {
unregister_netdev(dev);
-
- if (dev->priv)
- kfree(dev->priv);
-
+ kfree(dev->priv);
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
@@ -1096,8 +1093,7 @@
return 0;
out:
- if (dev->priv)
- kfree(dev->priv);
+ kfree(dev->priv);
return ret;
}
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 92f7552..478791e 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -842,7 +842,7 @@
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
int bit_nr =
- ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
rx_mode |= AcceptMulticast;
}
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 23b713c..1d4d886 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1696,15 +1696,20 @@
long ioaddr = net_dev->base_addr;
unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
+ int rx_work_limit;
if (netif_msg_rx_status(sis_priv))
printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
"status:0x%8.8x\n",
sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
+ rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx;
while (rx_status & OWN) {
unsigned int rx_size;
+ if (--rx_work_limit < 0)
+ break;
+
rx_size = (rx_status & DSIZE) - CRC_SIZE;
if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
@@ -1732,9 +1737,11 @@
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
if (netif_msg_rx_err(sis_priv))
- printk(KERN_INFO "%s: NULL pointer "
- "encountered in Rx ring, skipping\n",
- net_dev->name);
+ printk(KERN_WARNING "%s: NULL pointer "
+ "encountered in Rx ring\n"
+ "cur_rx:%4.4d, dirty_rx:%4.4d\n",
+ net_dev->name, sis_priv->cur_rx,
+ sis_priv->dirty_rx);
break;
}
@@ -1770,6 +1777,7 @@
sis_priv->rx_ring[entry].cmdsts = 0;
sis_priv->rx_ring[entry].bufptr = 0;
sis_priv->stats.rx_dropped++;
+ sis_priv->cur_rx++;
break;
}
skb->dev = net_dev;
@@ -1787,7 +1795,7 @@
/* refill the Rx buffer, what if the rate of refilling is slower
* than consuming ?? */
- for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) {
+ for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) {
struct sk_buff *skb;
entry = sis_priv->dirty_rx % NUM_RX_DESC;
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 0ddaa61..c573bb3 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1983,6 +1983,10 @@
if (lp->version >= (CHIP_91100 << 4))
smc_phy_detect(dev);
+ /* then shut everything down to save power */
+ smc_shutdown(dev);
+ smc_phy_powerdown(dev);
+
/* Set default parameters */
lp->msg_enable = NETIF_MSG_LINK;
lp->ctl_rfduplx = 0;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index efdb179..38b2b0a 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1091,8 +1091,10 @@
rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE;
np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size;
np->queue_mem = pci_alloc_consistent(np->pci_dev, np->queue_mem_size, &np->queue_mem_dma);
- if (np->queue_mem == 0)
+ if (np->queue_mem == NULL) {
+ free_irq(dev->irq, dev);
return -ENOMEM;
+ }
np->tx_done_q = np->queue_mem;
np->tx_done_q_dma = np->queue_mem_dma;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 5de0554..0ab9c38 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -80,7 +80,7 @@
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
- Version LK1.08 (D-Link):
+ Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- Fix bug of custom mac address
(StationAddr register only accept word write)
@@ -91,11 +91,14 @@
Version LK1.09a (ICPlus):
- Add the delay time in reading the contents of EEPROM
+ Version LK1.10 (Philippe De Muyter phdm@macqel.be):
+ - Make 'unblock interface after Tx underrun' work
+
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.09a"
-#define DRV_RELDATE "10-Jul-2003"
+#define DRV_VERSION "1.01+LK1.10"
+#define DRV_RELDATE "28-Oct-2005"
/* The user-configurable values.
@@ -263,8 +266,10 @@
IVb. References
The Sundance ST201 datasheet, preliminary version.
-http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
-http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+The Kendin KS8723 datasheet, preliminary version.
+The ICplus IP100 datasheet, preliminary version.
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
IVc. Errata
@@ -500,6 +505,25 @@
static int netdev_close(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
+static void sundance_reset(struct net_device *dev, unsigned long reset_cmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base + ASICCtrl;
+ int countdown;
+
+ /* ST201 documentation states ASICCtrl is a 32bit register */
+ iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr);
+ /* ST201 documentation states reset can take up to 1 ms */
+ countdown = 10 + 1;
+ while (ioread32 (ioaddr) & (ResetBusy << 16)) {
+ if (--countdown == 0) {
+ printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
+ break;
+ }
+ udelay(100);
+ }
+}
+
static int __devinit sundance_probe1 (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1190,23 +1214,33 @@
("%s: Transmit status is %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x1e) {
+ if (netif_msg_tx_err(np))
+ printk("%s: Transmit error status %4.4x.\n",
+ dev->name, tx_status);
np->stats.tx_errors++;
if (tx_status & 0x10)
np->stats.tx_fifo_errors++;
if (tx_status & 0x08)
np->stats.collisions++;
+ if (tx_status & 0x04)
+ np->stats.tx_fifo_errors++;
if (tx_status & 0x02)
np->stats.tx_window_errors++;
- /* This reset has not been verified!. */
- if (tx_status & 0x10) { /* Reset the Tx. */
- np->stats.tx_fifo_errors++;
- spin_lock(&np->lock);
- reset_tx(dev);
- spin_unlock(&np->lock);
+ /*
+ ** This reset has been verified on
+ ** DFE-580TX boards ! phdm@macqel.be.
+ */
+ if (tx_status & 0x10) { /* TxUnderrun */
+ unsigned short txthreshold;
+
+ txthreshold = ioread16 (ioaddr + TxStartThresh);
+ /* Restart Tx FIFO and transmitter */
+ sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16);
+ iowrite16 (txthreshold, ioaddr + TxStartThresh);
+ /* No need to reset the Tx pointer here */
}
- if (tx_status & 0x1e) /* Restart the Tx. */
- iowrite16 (TxEnable,
- ioaddr + MACCtrl1);
+ /* Restart the Tx. */
+ iowrite16 (TxEnable, ioaddr + MACCtrl1);
}
/* Yup, this is a documentation bug. It cost me *hours*. */
iowrite16 (0, ioaddr + TxStatus);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1802c3b..1828a6b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -37,6 +37,7 @@
#include <linux/tcp.h>
#include <linux/workqueue.h>
#include <linux/prefetch.h>
+#include <linux/dma-mapping.h>
#include <net/checksum.h>
@@ -67,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.42"
-#define DRV_MODULE_RELDATE "Oct 3, 2005"
+#define DRV_MODULE_VERSION "3.43"
+#define DRV_MODULE_RELDATE "Oct 24, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -219,6 +220,10 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S,
@@ -466,6 +471,15 @@
spin_unlock_irqrestore(&tp->indirect_lock, flags);
}
+static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val)
+{
+ /* If no workaround is needed, write to mem space directly */
+ if (tp->write32 != tg3_write_indirect_reg32)
+ tw32(NIC_SRAM_WIN_BASE + off, val);
+ else
+ tg3_write_mem(tp, off, val);
+}
+
static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
{
unsigned long flags;
@@ -570,7 +584,7 @@
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
u32 orig_clock_ctrl;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
return;
orig_clock_ctrl = clock_ctrl;
@@ -1210,7 +1224,7 @@
CLOCK_CTRL_ALTCLK |
CLOCK_CTRL_PWRDOWN_PLL133);
udelay(40);
- } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
/* do nothing */
} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
@@ -3712,14 +3726,14 @@
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
ethtool_op_set_tso(dev, 0);
}
else
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
} else {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
}
@@ -3850,7 +3864,7 @@
memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
- if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) &&
+ if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
(tp->dev->mtu > ETH_DATA_LEN))
tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
@@ -3905,10 +3919,8 @@
*/
static void tg3_free_consistent(struct tg3 *tp)
{
- if (tp->rx_std_buffers) {
- kfree(tp->rx_std_buffers);
- tp->rx_std_buffers = NULL;
- }
+ kfree(tp->rx_std_buffers);
+ tp->rx_std_buffers = NULL;
if (tp->rx_std) {
pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES,
tp->rx_std, tp->rx_std_mapping);
@@ -4347,7 +4359,7 @@
val &= ~PCIX_CAPS_RELAXED_ORDERING;
pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
u32 val;
/* Chip reset on 5780 will reset MSI enable bit,
@@ -6003,7 +6015,7 @@
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
- (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780))
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
limit = 8;
else
limit = 16;
@@ -6191,14 +6203,16 @@
tp->timer_counter = tp->timer_multiplier;
}
- /* Heartbeat is only sent once every 120 seconds. */
+ /* Heartbeat is only sent once every 2 seconds. */
if (!--tp->asf_counter) {
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
u32 val;
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_ALIVE);
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
- tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 3);
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX,
+ FWCMD_NICDRV_ALIVE2);
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
+ /* 5 seconds timeout */
+ tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
val = tr32(GRC_RX_CPU_EVENT);
val |= (1 << 14);
tw32(GRC_RX_CPU_EVENT, val);
@@ -6409,7 +6423,7 @@
tp->timer_counter = tp->timer_multiplier =
(HZ / tp->timer_offset);
tp->asf_counter = tp->asf_multiplier =
- ((HZ / tp->timer_offset) * 120);
+ ((HZ / tp->timer_offset) * 2);
init_timer(&tp->timer);
tp->timer.expires = jiffies + tp->timer_offset;
@@ -7237,7 +7251,7 @@
cmd->supported |= (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES))
+ if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_10baseT_Half |
@@ -7264,7 +7278,7 @@
{
struct tg3 *tp = netdev_priv(dev);
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
+ if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) {
/* These are the only valid advertisement bits allowed. */
if (cmd->autoneg == AUTONEG_ENABLE &&
(cmd->advertising & ~(ADVERTISED_1000baseT_Half |
@@ -7272,7 +7286,17 @@
ADVERTISED_Autoneg |
ADVERTISED_FIBRE)))
return -EINVAL;
- }
+ /* Fiber can only do SPEED_1000. */
+ else if ((cmd->autoneg != AUTONEG_ENABLE) &&
+ (cmd->speed != SPEED_1000))
+ return -EINVAL;
+ /* Copper cannot force SPEED_1000. */
+ } else if ((cmd->autoneg != AUTONEG_ENABLE) &&
+ (cmd->speed == SPEED_1000))
+ return -EINVAL;
+ else if ((cmd->speed == SPEED_1000) &&
+ (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+ return -EINVAL;
tg3_full_lock(tp, 0);
@@ -8380,7 +8404,7 @@
}
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) {
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
tp->nvram_jedecnum = JEDEC_ATMEL;
@@ -8980,7 +9004,7 @@
tp->phy_id = eeprom_phy_id;
if (eeprom_phy_serdes) {
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
else
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
@@ -9393,8 +9417,11 @@
}
/* Find msi capability. */
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
+ tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -9412,7 +9439,7 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
@@ -9607,7 +9634,7 @@
* ether_setup() via the alloc_etherdev() call
*/
if (tp->dev->mtu > ETH_DATA_LEN &&
- GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)
+ !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
/* Determine WakeOnLan speed to use. */
@@ -9830,7 +9857,7 @@
mac_offset = 0x7c;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
!(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
mac_offset = 0xcc;
if (tg3_nvram_lock(tp))
@@ -10148,6 +10175,9 @@
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
/* 5780 always in PCIX mode */
tp->dma_rwctrl |= 0x00144000;
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
+ /* 5714 always in PCIX mode */
+ tp->dma_rwctrl |= 0x00148000;
} else {
tp->dma_rwctrl |= 0x001b000f;
}
@@ -10347,6 +10377,7 @@
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5752: return "5752";
+ case PHY_ID_BCM5714: return "5714";
case PHY_ID_BCM5780: return "5780";
case PHY_ID_BCM8002: return "8002/serdes";
case 0: return "serdes";
@@ -10492,17 +10523,17 @@
}
/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
"for consistent allocations\n");
goto err_out_free_res;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2e733c6..fb7e2a5 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -137,6 +137,7 @@
#define ASIC_REV_5750 0x04
#define ASIC_REV_5752 0x06
#define ASIC_REV_5780 0x08
+#define ASIC_REV_5714 0x09
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
@@ -531,6 +532,8 @@
#define MAC_SERDES_CFG_EDGE_SELECT 0x00001000
#define MAC_SERDES_STAT 0x00000594
/* 0x598 --> 0x5b0 unused */
+#define SERDES_RX_CTRL 0x000005b0 /* 5780/5714 only */
+#define SERDES_RX_SIG_DETECT 0x00000400
#define SG_DIG_CTRL 0x000005b0
#define SG_DIG_USING_HW_AUTONEG 0x80000000
#define SG_DIG_SOFT_RESET 0x40000000
@@ -1329,6 +1332,8 @@
#define GRC_LCLCTRL_CLEARINT 0x00000002
#define GRC_LCLCTRL_SETINT 0x00000004
#define GRC_LCLCTRL_INT_ON_ATTN 0x00000008
+#define GRC_LCLCTRL_USE_SIG_DETECT 0x00000010 /* 5714/5780 only */
+#define GRC_LCLCTRL_USE_EXT_SIG_DETECT 0x00000020 /* 5714/5780 only */
#define GRC_LCLCTRL_GPIO_INPUT3 0x00000020
#define GRC_LCLCTRL_GPIO_OE3 0x00000040
#define GRC_LCLCTRL_GPIO_OUTPUT3 0x00000080
@@ -1507,6 +1512,7 @@
#define FWCMD_NICDRV_IPV6ADDR_CHG 0x00000004
#define FWCMD_NICDRV_FIX_DMAR 0x00000005
#define FWCMD_NICDRV_FIX_DMAW 0x00000006
+#define FWCMD_NICDRV_ALIVE2 0x0000000d
#define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c
#define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80
#define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00
@@ -2175,6 +2181,7 @@
TG3_FLG2_MII_SERDES)
#define TG3_FLG2_PARALLEL_DETECT 0x01000000
#define TG3_FLG2_ICH_WORKAROUND 0x02000000
+#define TG3_FLG2_5780_CLASS 0x04000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
@@ -2222,6 +2229,7 @@
#define PHY_ID_BCM5705 0x600081a0
#define PHY_ID_BCM5750 0x60008180
#define PHY_ID_BCM5752 0x60008100
+#define PHY_ID_BCM5714 0x60008340
#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM8002 0x60010140
#define PHY_ID_INVALID 0xffffffff
@@ -2246,8 +2254,8 @@
(X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \
(X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \
(X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \
- (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5780 || \
- (X) == PHY_ID_BCM8002)
+ (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
+ (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM8002)
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 6b8eee8..d7fb3ff 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -2076,8 +2076,7 @@
return 0;
err_out_iomap:
- if (de->ee_data)
- kfree(de->ee_data);
+ kfree(de->ee_data);
iounmap(regs);
err_out_res:
pci_release_regions(pdev);
@@ -2096,8 +2095,7 @@
if (!dev)
BUG();
unregister_netdev(dev);
- if (de->ee_data)
- kfree(de->ee_data);
+ kfree(de->ee_data);
iounmap(de->regs);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 6266a9a..125ed00 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1727,8 +1727,7 @@
tp->rx_ring, tp->rx_ring_dma);
err_out_mtable:
- if (tp->mtable)
- kfree (tp->mtable);
+ kfree (tp->mtable);
pci_iounmap(pdev, ioaddr);
err_out_free_res:
@@ -1806,8 +1805,7 @@
sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
tp->rx_ring, tp->rx_ring_dma);
- if (tp->mtable)
- kfree (tp->mtable);
+ kfree (tp->mtable);
pci_iounmap(pdev, tp->base_addr);
free_netdev (dev);
pci_release_regions (pdev);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index abc5cee..a368d08 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1212,10 +1212,8 @@
velocity_free_td_ring_entry(vptr, j, i);
}
- if (vptr->td_infos[j]) {
- kfree(vptr->td_infos[j]);
- vptr->td_infos[j] = NULL;
- }
+ kfree(vptr->td_infos[j]);
+ vptr->td_infos[j] = NULL;
}
}
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index cb429e7..4c11699 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2381,14 +2381,10 @@
dev_kfree_skb(skb);
}
- if (ai->flash)
- kfree(ai->flash);
- if (ai->rssi)
- kfree(ai->rssi);
- if (ai->APList)
- kfree(ai->APList);
- if (ai->SSID)
- kfree(ai->SSID);
+ kfree(ai->flash);
+ kfree(ai->rssi);
+ kfree(ai->APList);
+ kfree(ai->SSID);
if (freeres) {
/* PCMCIA frees this stuff, so only for PCI and ISA */
release_region( dev->base_addr, 64 );
@@ -3626,10 +3622,8 @@
int rc;
memset( &mySsid, 0, sizeof( mySsid ) );
- if (ai->flash) {
- kfree (ai->flash);
- ai->flash = NULL;
- }
+ kfree (ai->flash);
+ ai->flash = NULL;
/* The NOP is the first step in getting the card going */
cmd.cmd = NOP;
@@ -3666,14 +3660,10 @@
tdsRssiRid rssi_rid;
CapabilityRid cap_rid;
- if (ai->APList) {
- kfree(ai->APList);
- ai->APList = NULL;
- }
- if (ai->SSID) {
- kfree(ai->SSID);
- ai->SSID = NULL;
- }
+ kfree(ai->APList);
+ ai->APList = NULL;
+ kfree(ai->SSID);
+ ai->SSID = NULL;
// general configuration (read/modify/write)
status = readConfigRid(ai, lock);
if ( status != SUCCESS ) return ERROR;
@@ -3687,10 +3677,8 @@
memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */
}
else {
- if (ai->rssi) {
- kfree(ai->rssi);
- ai->rssi = NULL;
- }
+ kfree(ai->rssi);
+ ai->rssi = NULL;
if (cap_rid.softCap & 8)
ai->config.rmode |= RXMODE_NORMALIZED_RSSI;
else
@@ -5369,11 +5357,13 @@
static int proc_close( struct inode *inode, struct file *file )
{
- struct proc_data *data = (struct proc_data *)file->private_data;
- if ( data->on_close != NULL ) data->on_close( inode, file );
- if ( data->rbuffer ) kfree( data->rbuffer );
- if ( data->wbuffer ) kfree( data->wbuffer );
- kfree( data );
+ struct proc_data *data = file->private_data;
+
+ if (data->on_close != NULL)
+ data->on_close(inode, file);
+ kfree(data->rbuffer);
+ kfree(data->wbuffer);
+ kfree(data);
return 0;
}
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index bf25584..784de91 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -258,9 +258,7 @@
/* Unlink device structure, free pieces */
*linkp = link->next;
- if (link->priv) {
- kfree(link->priv);
- }
+ kfree(link->priv);
kfree(link);
} /* airo_detach */
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index d570110..1fbe027 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1653,8 +1653,7 @@
unregister_netdev(dev);
remove_proc_entry("driver/atmel", NULL);
free_irq(dev->irq, dev);
- if (priv->firmware)
- kfree(priv->firmware);
+ kfree(priv->firmware);
if (freeres) {
/* PCMCIA frees this stuff, so only for PCI */
release_region(dev->base_addr, 64);
@@ -2450,8 +2449,7 @@
break;
}
- if (priv->firmware)
- kfree(priv->firmware);
+ kfree(priv->firmware);
priv->firmware = new_firmware;
priv->firmware_length = com.len;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ff031a3..195cb36 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -259,8 +259,7 @@
/* Unlink device structure, free pieces */
*linkp = link->next;
- if (link->priv)
- kfree(link->priv);
+ kfree(link->priv);
kfree(link);
}
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index eba0d9d..579480d 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -444,6 +444,43 @@
return err;
}
+/* Write a block of data to the chip's buffer with padding if
+ * neccessary, via the BAP. Synchronization/serialization is the
+ * caller's problem. len must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if (len < 0 || len % 2 || data_len > len)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Transfer all the complete words of data */
+ hermes_write_words(hw, dreg, buf, data_len/2);
+ /* If there is an odd byte left over pad and transfer it */
+ if (data_len & 1) {
+ u8 end[2];
+ end[1] = 0;
+ end[0] = ((unsigned char *)buf)[data_len - 1];
+ hermes_write_words(hw, dreg, end, 1);
+ data_len ++;
+ }
+ /* Now send zeros for the padding */
+ if (data_len < len)
+ hermes_clear_words(hw, dreg, (len - data_len) / 2);
+ /* Complete */
+ out:
+ return err;
+}
+
/* Read a Length-Type-Value record from the card.
*
* If length is NULL, we ignore the length read from the card, and
@@ -531,6 +568,7 @@
EXPORT_SYMBOL(hermes_bap_pread);
EXPORT_SYMBOL(hermes_bap_pwrite);
+EXPORT_SYMBOL(hermes_bap_pwrite_pad);
EXPORT_SYMBOL(hermes_read_ltv);
EXPORT_SYMBOL(hermes_write_ltv);
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index ad28e32..a6bd472 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -376,6 +376,8 @@
u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
u16 id, u16 offset);
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
+ unsigned data_len, unsigned len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 53f5246..2617d70 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -552,7 +552,6 @@
kfree(addr);
kfree(qual);
-
return 0;
}
@@ -3081,9 +3080,7 @@
ret = local->func->download(local, param);
out:
- if (param != NULL)
- kfree(param);
-
+ kfree(param);
return ret;
}
#endif /* PRISM2_DOWNLOAD_SUPPORT */
@@ -3890,9 +3887,7 @@
}
out:
- if (param != NULL)
- kfree(param);
-
+ kfree(param);
return ret;
}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index de4e6c2..3db0c32 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -4030,6 +4030,10 @@
int i;
rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL);
+ if (unlikely(!rxq)) {
+ IPW_ERROR("memory allocation failed\n");
+ return NULL;
+ }
memset(rxq, 0, sizeof(*rxq));
spin_lock_init(&rxq->lock);
INIT_LIST_HEAD(&rxq->rx_free);
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index d3d4ec9..488ab06 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -490,7 +490,8 @@
return 0;
}
- /* Check packet length, pad short packets, round up odd length */
+ /* Length of the packet body */
+ /* FIXME: what if the skb is smaller than this? */
len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN);
skb = skb_padto(skb, len);
if (skb == NULL)
@@ -541,13 +542,21 @@
stats->tx_errors++;
goto fail;
}
+ /* Actual xfer length - allow for padding */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN - ETH_HLEN)
+ len = ETH_ZLEN - ETH_HLEN;
} else { /* IEEE 802.3 frame */
data_len = len + ETH_HLEN;
data_off = HERMES_802_3_OFFSET;
p = skb->data;
+ /* Actual xfer length - round up for odd length packets */
+ len = ALIGN(data_len, 2);
+ if (len < ETH_ZLEN)
+ len = ETH_ZLEN;
}
- err = hermes_bap_pwrite(hw, USER_BAP, p, data_len,
+ err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len,
txfid, data_off);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 6c9584a..78bdb35 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -754,8 +754,7 @@
pci_unmap_single(priv->pdev, buf->pci_addr,
buf->size, PCI_DMA_FROMDEVICE);
buf->pci_addr = 0;
- if (buf->mem)
- kfree(buf->mem);
+ kfree(buf->mem);
buf->size = 0;
buf->mem = NULL;
}
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 5952e996..3b49efa 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -97,12 +97,6 @@
/* lock the driver code */
spin_lock_irqsave(&priv->slock, flags);
- /* determine the amount of fragments needed to store the frame */
-
- frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- if (init_wds)
- frame_size += 6;
-
/* check whether the destination queue has enough fragments for the frame */
curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
@@ -213,6 +207,7 @@
/* store the skb address for future freeing */
priv->data_low_tx[index] = skb;
/* set the proper fragment start address and size information */
+ frame_size = skb->len;
fragment->size = cpu_to_le16(frame_size);
fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
fragment->address = cpu_to_le32(pci_map_address);
@@ -246,12 +241,10 @@
return 0;
drop_free:
- /* free the skbuf structure before aborting */
- dev_kfree_skb(skb);
- skb = NULL;
-
priv->statistics.tx_dropped++;
spin_unlock_irqrestore(&priv->slock, flags);
+ dev_kfree_skb(skb);
+ skb = NULL;
return err;
}
diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c
index 12123e2..eea2f04 100644
--- a/drivers/net/wireless/prism54/oid_mgt.c
+++ b/drivers/net/wireless/prism54/oid_mgt.c
@@ -268,11 +268,10 @@
if (!priv->mib)
return;
- for (i = 0; i < OID_NUM_LAST; i++)
- if (priv->mib[i]) {
- kfree(priv->mib[i]);
- priv->mib[i] = NULL;
- }
+ for (i = 0; i < OID_NUM_LAST; i++) {
+ kfree(priv->mib[i]);
+ priv->mib[i] = NULL;
+ }
kfree(priv->mib);
priv->mib = NULL;
}
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 7bc7fc8..d25264b 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -860,12 +860,9 @@
strip_info->mtu = dev->mtu = mtu;
return (1);
}
- if (r)
- kfree(r);
- if (s)
- kfree(s);
- if (t)
- kfree(t);
+ kfree(r);
+ kfree(s);
+ kfree(t);
return (0);
}
@@ -922,13 +919,9 @@
printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
strip_info->dev->name, old_mtu, strip_info->mtu);
- if (orbuff)
- kfree(orbuff);
- if (osbuff)
- kfree(osbuff);
- if (otbuff)
- kfree(otbuff);
-
+ kfree(orbuff);
+ kfree(osbuff);
+ kfree(otbuff);
return 0;
}
@@ -2498,18 +2491,13 @@
/*
* Free all STRIP frame buffers.
*/
- if (strip_info->rx_buff) {
- kfree(strip_info->rx_buff);
- strip_info->rx_buff = NULL;
- }
- if (strip_info->sx_buff) {
- kfree(strip_info->sx_buff);
- strip_info->sx_buff = NULL;
- }
- if (strip_info->tx_buff) {
- kfree(strip_info->tx_buff);
- strip_info->tx_buff = NULL;
- }
+ kfree(strip_info->rx_buff);
+ strip_info->rx_buff = NULL;
+ kfree(strip_info->sx_buff);
+ strip_info->sx_buff = NULL;
+ kfree(strip_info->tx_buff);
+ strip_info->tx_buff = NULL;
+
del_timer(&strip_info->idle_timer);
return 0;
}
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index f53d7b8..b1b1c6f 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -370,6 +370,8 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = ata_chk_err(ap);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -402,6 +404,8 @@
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = ata_chk_err(ap);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -4254,11 +4258,10 @@
DPRINTK("ENTER\n");
/* alloc a container for our list of ATA ports (buses) */
- host_set = kmalloc(sizeof(struct ata_host_set) +
+ host_set = kzalloc(sizeof(struct ata_host_set) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
if (!host_set)
return 0;
- memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
spin_lock_init(&host_set->lock);
host_set->dev = dev;
@@ -4298,10 +4301,8 @@
count++;
}
- if (!count) {
- kfree(host_set);
- return 0;
- }
+ if (!count)
+ goto err_free_ret;
/* obtain irq, that is shared between channels */
if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
@@ -4359,6 +4360,7 @@
ata_host_remove(host_set->ports[i], 1);
scsi_host_put(host_set->ports[i]->host);
}
+err_free_ret:
kfree(host_set);
VPRINTK("EXIT, returning 0\n");
return 0;
@@ -4468,15 +4470,13 @@
{
struct ata_probe_ent *probe_ent;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
-
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->dev = dev;
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 5885888..89a04b1 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -40,14 +40,56 @@
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include "libata.h"
+#define SECTOR_SIZE 512
+
typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+#define RW_RECOVERY_MPAGE 0x1
+#define RW_RECOVERY_MPAGE_LEN 12
+#define CACHE_MPAGE 0x8
+#define CACHE_MPAGE_LEN 20
+#define CONTROL_MPAGE 0xa
+#define CONTROL_MPAGE_LEN 12
+#define ALL_MPAGES 0x3f
+#define ALL_SUB_MPAGES 0xff
+
+
+static const u8 def_rw_recovery_mpage[] = {
+ RW_RECOVERY_MPAGE,
+ RW_RECOVERY_MPAGE_LEN - 2,
+ (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */
+ (1 << 6), /* ARRE (auto read reallocation) */
+ 0, /* read retry count */
+ 0, 0, 0, 0,
+ 0, /* write retry count */
+ 0, 0, 0
+};
+
+static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = {
+ CACHE_MPAGE,
+ CACHE_MPAGE_LEN - 2,
+ 0, /* contains WCE, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, /* contains DRA, needs to be 0 for logic */
+ 0, 0, 0, 0, 0, 0, 0
+};
+
+static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
+ CONTROL_MPAGE,
+ CONTROL_MPAGE_LEN - 2,
+ 2, /* DSENSE=0, GLTSD=1 */
+ 0, /* [QAM+QERR may be 1, see 05-359r1] */
+ 0, 0, 0, 0, 0xff, 0xff,
+ 0, 30 /* extended self test time, see 05-359r1 */
+};
+
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
@@ -86,6 +128,150 @@
return 0;
}
+/**
+ * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+
+int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[4], *argbuf = NULL;
+ int argsize = 0;
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq)
+ return -EINTR;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+
+ if (args[3]) {
+ argsize = SECTOR_SIZE * args[3];
+ argbuf = kmalloc(argsize, GFP_KERNEL);
+ if (argbuf == NULL) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ scsi_cmd[1] = (4 << 1); /* PIO Data-in */
+ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev,
+ block count in sector count field */
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ } else {
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ sreq->sr_data_direction = DMA_NONE;
+ }
+
+ scsi_cmd[0] = ATA_16;
+
+ scsi_cmd[4] = args[2];
+ if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */
+ scsi_cmd[6] = args[3];
+ scsi_cmd[8] = args[1];
+ scsi_cmd[10] = 0x4f;
+ scsi_cmd[12] = 0xc2;
+ } else {
+ scsi_cmd[6] = args[1];
+ }
+ scsi_cmd[14] = args[0];
+
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+ if ((argbuf)
+ && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ rc = -EFAULT;
+error:
+ scsi_release_request(sreq);
+
+ if (argbuf)
+ kfree(argbuf);
+
+ return rc;
+}
+
+/**
+ * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
+ * @dev: Device to whom we are issuing command
+ * @arg: User provided data for issuing command
+ *
+ * LOCKING:
+ * Defined by the SCSI layer. We don't really care.
+ *
+ * RETURNS:
+ * Zero on success, negative errno on error.
+ */
+int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
+{
+ int rc = 0;
+ u8 scsi_cmd[MAX_COMMAND_SIZE];
+ u8 args[7];
+ struct scsi_request *sreq;
+
+ if (NULL == (void *)arg)
+ return -EINVAL;
+
+ if (copy_from_user(args, arg, sizeof(args)))
+ return -EFAULT;
+
+ memset(scsi_cmd, 0, sizeof(scsi_cmd));
+ scsi_cmd[0] = ATA_16;
+ scsi_cmd[1] = (3 << 1); /* Non-data */
+ /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */
+ scsi_cmd[4] = args[1];
+ scsi_cmd[6] = args[2];
+ scsi_cmd[8] = args[3];
+ scsi_cmd[10] = args[4];
+ scsi_cmd[12] = args[5];
+ scsi_cmd[14] = args[0];
+
+ sreq = scsi_allocate_request(scsidev, GFP_KERNEL);
+ if (!sreq) {
+ rc = -EINTR;
+ goto error;
+ }
+
+ sreq->sr_data_direction = DMA_NONE;
+ /* Good values for timeout and retries? Values below
+ from scsi_ioctl_send_command() for default case... */
+ scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5);
+
+ if (sreq->sr_result) {
+ rc = -EIO;
+ goto error;
+ }
+
+ /* Need code to retrieve data from check condition? */
+
+error:
+ scsi_release_request(sreq);
+ return rc;
+}
+
int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
{
struct ata_port *ap;
@@ -115,6 +301,16 @@
return -EINVAL;
return 0;
+ case HDIO_DRIVE_CMD:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_cmd_ioctl(scsidev, arg);
+
+ case HDIO_DRIVE_TASK:
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
+ return ata_task_ioctl(scsidev, arg);
+
default:
rc = -ENOTTY;
break;
@@ -173,23 +369,70 @@
}
/**
- * ata_to_sense_error - convert ATA error to SCSI error
- * @qc: Command that we are erroring out
- * @drv_stat: value contained in ATA status register
+ * ata_dump_status - user friendly display of error info
+ * @id: id of the port in question
+ * @tf: ptr to filled out taskfile
*
- * Converts an ATA error into a SCSI error. While we are at it
- * we decode and dump the ATA error for the user so that they
- * have some idea what really happened at the non make-believe
- * layer.
+ * Decode and dump the ATA error/status registers for the user so
+ * that they have some idea what really happened at the non
+ * make-believe layer.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+{
+ u8 stat = tf->command, err = tf->feature;
+
+ printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat);
+ if (stat & ATA_BUSY) {
+ printk("Busy }\n"); /* Data is not valid in this case */
+ } else {
+ if (stat & 0x40) printk("DriveReady ");
+ if (stat & 0x20) printk("DeviceFault ");
+ if (stat & 0x10) printk("SeekComplete ");
+ if (stat & 0x08) printk("DataRequest ");
+ if (stat & 0x04) printk("CorrectedError ");
+ if (stat & 0x02) printk("Index ");
+ if (stat & 0x01) printk("Error ");
+ printk("}\n");
+
+ if (err) {
+ printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
+ if (err & 0x04) printk("DriveStatusError ");
+ if (err & 0x80) {
+ if (err & 0x04) printk("BadCRC ");
+ else printk("Sector ");
+ }
+ if (err & 0x40) printk("UncorrectableError ");
+ if (err & 0x10) printk("SectorIdNotFound ");
+ if (err & 0x02) printk("TrackZeroNotFound ");
+ if (err & 0x01) printk("AddrMarkNotFound ");
+ printk("}\n");
+ }
+ }
+}
+
+/**
+ * ata_to_sense_error - convert ATA error to SCSI error
+ * @drv_stat: value contained in ATA status register
+ * @drv_err: value contained in ATA error register
+ * @sk: the sense key we'll fill out
+ * @asc: the additional sense code we'll fill out
+ * @ascq: the additional sense code qualifier we'll fill out
+ *
+ * Converts an ATA error into a SCSI error. Fill out pointers to
+ * SK, ASC, and ASCQ bytes for later use in fixed or descriptor
+ * format sense blocks.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-
-void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
+ u8 *ascq)
{
- struct scsi_cmnd *cmd = qc->scsicmd;
- u8 err = 0;
+ int i;
+
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
@@ -230,96 +473,184 @@
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
- int i = 0;
/*
* Is this an error we can process/parse
*/
-
- if(drv_stat & ATA_ERR)
- /* Read the err bits */
- err = ata_chk_err(qc->ap);
-
- /* Display the ATA level error info */
-
- printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
- if(drv_stat & 0x80)
- {
- printk("Busy ");
- err = 0; /* Data is not valid in this case */
+ if (drv_stat & ATA_BUSY) {
+ drv_err = 0; /* Ignore the err bits, they're invalid */
}
- else {
- if(drv_stat & 0x40) printk("DriveReady ");
- if(drv_stat & 0x20) printk("DeviceFault ");
- if(drv_stat & 0x10) printk("SeekComplete ");
- if(drv_stat & 0x08) printk("DataRequest ");
- if(drv_stat & 0x04) printk("CorrectedError ");
- if(drv_stat & 0x02) printk("Index ");
- if(drv_stat & 0x01) printk("Error ");
- }
- printk("}\n");
- if(err)
- {
- printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
- if(err & 0x04) printk("DriveStatusError ");
- if(err & 0x80)
- {
- if(err & 0x04)
- printk("BadCRC ");
- else
- printk("Sector ");
+ if (drv_err) {
+ /* Look for drv_err */
+ for (i = 0; sense_table[i][0] != 0xFF; i++) {
+ /* Look for best matches first */
+ if ((sense_table[i][0] & drv_err) ==
+ sense_table[i][0]) {
+ *sk = sense_table[i][1];
+ *asc = sense_table[i][2];
+ *ascq = sense_table[i][3];
+ goto translate_done;
+ }
}
- if(err & 0x40) printk("UncorrectableError ");
- if(err & 0x10) printk("SectorIdNotFound ");
- if(err & 0x02) printk("TrackZeroNotFound ");
- if(err & 0x01) printk("AddrMarkNotFound ");
- printk("}\n");
-
- /* Should we dump sector info here too ?? */
+ /* No immediate match */
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
}
-
- /* Look for err */
- while(sense_table[i][0] != 0xFF)
- {
- /* Look for best matches first */
- if((sense_table[i][0] & err) == sense_table[i][0])
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
- }
- i++;
- }
- /* No immediate match */
- if(err)
- printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
-
- i = 0;
/* Fall back to interpreting status bits */
- while(stat_table[i][0] != 0xFF)
- {
- if(stat_table[i][0] & drv_stat)
- {
- ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
- sense_table[i][2] /* asc */,
- sense_table[i][3] /* ascq */ );
- return;
+ for (i = 0; stat_table[i][0] != 0xFF; i++) {
+ if (stat_table[i][0] & drv_stat) {
+ *sk = stat_table[i][1];
+ *asc = stat_table[i][2];
+ *ascq = stat_table[i][3];
+ goto translate_done;
}
- i++;
}
- /* No error ?? */
- printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
- /* additional-sense-code[-qualifier] */
+ /* No error? Undecoded? */
+ printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
+ id, drv_stat);
- if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
- /* "unrecovered read error" */
- } else {
- ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
- /* "write error - auto-reallocation failed" */
+ /* For our last chance pick, use medium read error because
+ * it's much more common than an ATA drive telling you a write
+ * has failed.
+ */
+ *sk = MEDIUM_ERROR;
+ *asc = 0x11; /* "unrecovered read error" */
+ *ascq = 0x04; /* "auto-reallocation failed" */
+
+ translate_done:
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
+ "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
+ *sk, *asc, *ascq);
+ return;
+}
+
+/*
+ * ata_gen_ata_desc_sense - Generate check condition sense block.
+ * @qc: Command that completed.
+ *
+ * This function is specific to the ATA descriptor format sense
+ * block specified for the ATA pass through commands. Regardless
+ * of whether the command errored or not, return a sense
+ * block. Copy all controller registers into the sense
+ * block. Clear sense key, ASC & ASCQ if there is no error.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+ unsigned char *desc = sb + 8;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[1], &sb[2], &sb[3]);
+ sb[1] &= 0x0f;
+ }
+
+ /*
+ * Sense data is current and format is descriptor.
+ */
+ sb[0] = 0x72;
+
+ desc[0] = 0x09;
+
+ /*
+ * Set length of additional sense data.
+ * Since we only populate descriptor 0, the total
+ * length is the same (fixed) length as descriptor 0.
+ */
+ desc[1] = sb[7] = 14;
+
+ /*
+ * Copy registers into sense buffer.
+ */
+ desc[2] = 0x00;
+ desc[3] = tf->feature; /* == error reg */
+ desc[5] = tf->nsect;
+ desc[7] = tf->lbal;
+ desc[9] = tf->lbam;
+ desc[11] = tf->lbah;
+ desc[12] = tf->device;
+ desc[13] = tf->command; /* == status reg */
+
+ /*
+ * Fill in Extend bit, and the high order bytes
+ * if applicable.
+ */
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ desc[2] |= 0x01;
+ desc[4] = tf->hob_nsect;
+ desc[6] = tf->hob_lbal;
+ desc[8] = tf->hob_lbam;
+ desc[10] = tf->hob_lbah;
+ }
+}
+
+/**
+ * ata_gen_fixed_sense - generate a SCSI fixed sense block
+ * @qc: Command that we are erroring out
+ *
+ * Leverage ata_to_sense_error() to give us the codes. Fit our
+ * LBA in here if there's room.
+ *
+ * LOCKING:
+ * inherited from caller
+ */
+void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned char *sb = cmd->sense_buffer;
+
+ memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
+
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ /*
+ * Read the controller registers.
+ */
+ assert(NULL != qc->ap->ops->tf_read);
+ qc->ap->ops->tf_read(qc->ap, tf);
+
+ /*
+ * Use ata_to_sense_error() to map status register bits
+ * onto sense key, asc & ascq.
+ */
+ if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
+ &sb[2], &sb[12], &sb[13]);
+ sb[2] &= 0x0f;
+ }
+
+ sb[0] = 0x70;
+ sb[7] = 0x0a;
+
+ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) {
+ /* A small (28b) LBA will fit in the 32b info field */
+ sb[0] |= 0x80; /* set valid bit */
+ sb[3] = tf->device & 0x0f;
+ sb[4] = tf->lbah;
+ sb[5] = tf->lbam;
+ sb[6] = tf->lbal;
}
}
@@ -871,11 +1202,36 @@
static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
{
struct scsi_cmnd *cmd = qc->scsicmd;
+ int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ);
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
- else
- cmd->result = SAM_STAT_GOOD;
+ /* For ATA pass thru (SAT) commands, generate a sense block if
+ * user mandated it or if there's an error. Note that if we
+ * generate because the user forced us to, a check condition
+ * is generated and the ATA register values are returned
+ * whether the command completed successfully or not. If there
+ * was no error, SK, ASC and ASCQ will all be zero.
+ */
+ if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) &&
+ ((cmd->cmnd[2] & 0x20) || need_sense)) {
+ ata_gen_ata_desc_sense(qc);
+ } else {
+ if (!need_sense) {
+ cmd->result = SAM_STAT_GOOD;
+ } else {
+ /* TODO: decide which descriptor format to use
+ * for 48b LBA devices and call that here
+ * instead of the fixed desc, which is only
+ * good for smaller LBA (and maybe CHS?)
+ * devices.
+ */
+ ata_gen_fixed_sense(qc);
+ }
+ }
+
+ if (need_sense) {
+ /* The ata_gen_..._sense routines fill in tf */
+ ata_dump_status(qc->ap->id, &qc->tf);
+ }
qc->scsidone(cmd);
@@ -1266,13 +1622,9 @@
static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
const u8 *last)
{
- u8 page[] = {
- 0x8, /* page code */
- 0x12, /* page length */
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */
- 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
- };
+ u8 page[CACHE_MPAGE_LEN];
+ memcpy(page, def_cache_mpage, sizeof(page));
if (ata_id_wcache_enabled(id))
page[2] |= (1 << 2); /* write cache enable */
if (!ata_id_rahead_enabled(id))
@@ -1296,15 +1648,9 @@
static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30};
-
- /* byte 2: set the descriptor format sense data bit (bit 2)
- * since we need to support returning this format for SAT
- * commands and any SCSI commands against a 48b LBA device.
- */
-
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_control_mpage,
+ sizeof(def_control_mpage));
+ return sizeof(def_control_mpage);
}
/**
@@ -1321,15 +1667,10 @@
static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
{
- const u8 page[] = {
- 0x1, /* page code */
- 0xa, /* page length */
- (1 << 7) | (1 << 6), /* note auto r/w reallocation */
- 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */
- };
- ata_msense_push(ptr_io, last, page, sizeof(page));
- return sizeof(page);
+ ata_msense_push(ptr_io, last, def_rw_recovery_mpage,
+ sizeof(def_rw_recovery_mpage));
+ return sizeof(def_rw_recovery_mpage);
}
/**
@@ -1338,7 +1679,9 @@
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
*
- * Simulate MODE SENSE commands.
+ * Simulate MODE SENSE commands. Assume this is invoked for direct
+ * access devices (e.g. disks) only. There should be no block
+ * descriptor for other device types.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
@@ -1348,15 +1691,22 @@
unsigned int buflen)
{
u8 *scsicmd = args->cmd->cmnd, *p, *last;
- unsigned int page_control, six_byte, output_len;
+ const u8 sat_blk_desc[] = {
+ 0, 0, 0, 0, /* number of blocks: sat unspecified */
+ 0,
+ 0, 0x2, 0x0 /* block length: 512 bytes */
+ };
+ u8 pg, spg;
+ unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen;
VPRINTK("ENTER\n");
six_byte = (scsicmd[0] == MODE_SENSE);
-
- /* we only support saved and current values (which we treat
- * in the same manner)
+ ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */
+ /*
+ * LLBA bit in msense(10) ignored (compliant)
*/
+
page_control = scsicmd[2] >> 6;
switch (page_control) {
case 0: /* current */
@@ -1369,29 +1719,42 @@
goto invalid_fld;
}
- if (six_byte)
- output_len = 4;
- else
- output_len = 8;
+ if (six_byte) {
+ output_len = 4 + (ebd ? 8 : 0);
+ alloc_len = scsicmd[4];
+ } else {
+ output_len = 8 + (ebd ? 8 : 0);
+ alloc_len = (scsicmd[7] << 8) + scsicmd[8];
+ }
+ minlen = (alloc_len < buflen) ? alloc_len : buflen;
p = rbuf + output_len;
- last = rbuf + buflen - 1;
+ last = rbuf + minlen - 1;
- switch(scsicmd[2] & 0x3f) {
- case 0x01: /* r/w error recovery */
+ pg = scsicmd[2] & 0x3f;
+ spg = scsicmd[3];
+ /*
+ * No mode subpages supported (yet) but asking for _all_
+ * subpages may be valid
+ */
+ if (spg && (spg != ALL_SUB_MPAGES))
+ goto invalid_fld;
+
+ switch(pg) {
+ case RW_RECOVERY_MPAGE:
output_len += ata_msense_rw_recovery(&p, last);
break;
- case 0x08: /* caching */
+ case CACHE_MPAGE:
output_len += ata_msense_caching(args->id, &p, last);
break;
- case 0x0a: { /* control mode */
+ case CONTROL_MPAGE: {
output_len += ata_msense_ctl_mode(&p, last);
break;
}
- case 0x3f: /* all pages */
+ case ALL_MPAGES:
output_len += ata_msense_rw_recovery(&p, last);
output_len += ata_msense_caching(args->id, &p, last);
output_len += ata_msense_ctl_mode(&p, last);
@@ -1401,15 +1764,31 @@
goto invalid_fld;
}
+ if (minlen < 1)
+ return 0;
if (six_byte) {
output_len--;
rbuf[0] = output_len;
+ if (ebd) {
+ if (minlen > 3)
+ rbuf[3] = sizeof(sat_blk_desc);
+ if (minlen > 11)
+ memcpy(rbuf + 4, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
} else {
output_len -= 2;
rbuf[0] = output_len >> 8;
- rbuf[1] = output_len;
+ if (minlen > 1)
+ rbuf[1] = output_len;
+ if (ebd) {
+ if (minlen > 7)
+ rbuf[7] = sizeof(sat_blk_desc);
+ if (minlen > 15)
+ memcpy(rbuf + 8, sat_blk_desc,
+ sizeof(sat_blk_desc));
+ }
}
-
return 0;
invalid_fld:
@@ -1623,7 +2002,12 @@
VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat);
if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ)))
- ata_to_sense_error(qc, drv_stat);
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
else if (unlikely(drv_stat & ATA_ERR)) {
DPRINTK("request check condition\n");
@@ -1782,6 +2166,143 @@
return dev;
}
+/*
+ * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value.
+ * @byte1: Byte 1 from pass-thru CDB.
+ *
+ * RETURNS:
+ * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise.
+ */
+static u8
+ata_scsi_map_proto(u8 byte1)
+{
+ switch((byte1 & 0x1e) >> 1) {
+ case 3: /* Non-data */
+ return ATA_PROT_NODATA;
+
+ case 6: /* DMA */
+ return ATA_PROT_DMA;
+
+ case 4: /* PIO Data-in */
+ case 5: /* PIO Data-out */
+ if (byte1 & 0xe0) {
+ return ATA_PROT_PIO_MULT;
+ }
+ return ATA_PROT_PIO;
+
+ case 10: /* Device Reset */
+ case 0: /* Hard Reset */
+ case 1: /* SRST */
+ case 2: /* Bus Idle */
+ case 7: /* Packet */
+ case 8: /* DMA Queued */
+ case 9: /* Device Diagnostic */
+ case 11: /* UDMA Data-in */
+ case 12: /* UDMA Data-Out */
+ case 13: /* FPDMA */
+ default: /* Reserved */
+ break;
+ }
+
+ return ATA_PROT_UNKNOWN;
+}
+
+/**
+ * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
+ * @qc: command structure to be initialized
+ * @cmd: SCSI command to convert
+ *
+ * Handles either 12 or 16-byte versions of the CDB.
+ *
+ * RETURNS:
+ * Zero on success, non-zero on failure.
+ */
+static unsigned int
+ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
+{
+ struct ata_taskfile *tf = &(qc->tf);
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN)
+ return 1;
+
+ /*
+ * 12 and 16 byte CDBs use different offsets to
+ * provide the various register values.
+ */
+ if (scsicmd[0] == ATA_16) {
+ /*
+ * 16-byte CDB - may contain extended commands.
+ *
+ * If that is the case, copy the upper byte register values.
+ */
+ if (scsicmd[1] & 0x01) {
+ tf->hob_feature = scsicmd[3];
+ tf->hob_nsect = scsicmd[5];
+ tf->hob_lbal = scsicmd[7];
+ tf->hob_lbam = scsicmd[9];
+ tf->hob_lbah = scsicmd[11];
+ tf->flags |= ATA_TFLAG_LBA48;
+ } else
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ /*
+ * Always copy low byte, device and command registers.
+ */
+ tf->feature = scsicmd[4];
+ tf->nsect = scsicmd[6];
+ tf->lbal = scsicmd[8];
+ tf->lbam = scsicmd[10];
+ tf->lbah = scsicmd[12];
+ tf->device = scsicmd[13];
+ tf->command = scsicmd[14];
+ } else {
+ /*
+ * 12-byte CDB - incapable of extended commands.
+ */
+ tf->flags &= ~ATA_TFLAG_LBA48;
+
+ tf->feature = scsicmd[3];
+ tf->nsect = scsicmd[4];
+ tf->lbal = scsicmd[5];
+ tf->lbam = scsicmd[6];
+ tf->lbah = scsicmd[7];
+ tf->device = scsicmd[8];
+ tf->command = scsicmd[9];
+ }
+
+ /*
+ * Filter SET_FEATURES - XFER MODE command -- otherwise,
+ * SET_FEATURES - XFER MODE must be preceded/succeeded
+ * by an update to hardware-specific registers for each
+ * controller (i.e. the reason for ->set_piomode(),
+ * ->set_dmamode(), and ->post_set_mode() hooks).
+ */
+ if ((tf->command == ATA_CMD_SET_FEATURES)
+ && (tf->feature == SETFEATURES_XFER))
+ return 1;
+
+ /*
+ * Set flags so that all registers will be written,
+ * and pass on write indication (used for PIO/DMA
+ * setup.)
+ */
+ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE);
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ tf->flags |= ATA_TFLAG_WRITE;
+
+ /*
+ * Set transfer length.
+ *
+ * TODO: find out if we need to do more here to
+ * cover scatter/gather case.
+ */
+ qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+
+ return 0;
+}
+
/**
* ata_get_xlat_func - check if SCSI to ATA translation is possible
* @dev: ATA device
@@ -1814,6 +2335,11 @@
case VERIFY:
case VERIFY_16:
return ata_scsi_verify_xlat;
+
+ case ATA_12:
+ case ATA_16:
+ return ata_scsi_pass_thru;
+
case START_STOP:
return ata_scsi_start_stop_xlat;
}
@@ -1972,7 +2498,7 @@
ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
break;
- /* mandantory commands we haven't implemented yet */
+ /* mandatory commands we haven't implemented yet */
case REQUEST_SENSE:
/* all other commands */
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3d60190..65c264b 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -50,13 +50,14 @@
unsigned int wait, unsigned int can_sleep);
extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
+extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
+extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
/* libata-scsi.c */
extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd);
extern void ata_scsi_scan_host(struct ata_port *ap);
-extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat);
extern int ata_scsi_error(struct Scsi_Host *host);
extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
unsigned int buflen);
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 9820f27..af99feb 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
-#define DRV_VERSION "0.01"
+#define DRV_VERSION "0.03"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
@@ -79,7 +79,6 @@
aNIEN = (1 << 8), /* irq mask: 1==masked */
aGO = (1 << 7), /* packet trigger ("Go!") */
aRSTADM = (1 << 5), /* ADMA logic reset */
- aRSTA = (1 << 2), /* ATA hard reset */
aPIOMD4 = 0x0003, /* PIO mode 4 */
/* ADMA_STATUS register bits */
@@ -452,24 +451,25 @@
struct adma_port_priv *pp;
struct ata_queued_cmd *qc;
void __iomem *chan = ADMA_REGS(mmio_base, port_no);
- u8 drv_stat, status = readb(chan + ADMA_STATUS);
+ u8 drv_stat = 0, status = readb(chan + ADMA_STATUS);
if (status == 0)
continue;
handled = 1;
adma_enter_reg_mode(ap);
- if ((ap->flags & ATA_FLAG_PORT_DISABLED))
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- drv_stat = 0;
- if ((status & (aPERR | aPSD | aUIRQ)))
- drv_stat = ATA_ERR;
- else if (pp->pkt[0] != cDONE)
- drv_stat = ATA_ERR;
- ata_qc_complete(qc, drv_stat);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if ((status & (aPERR | aPSD | aUIRQ)))
+ drv_stat = ATA_ERR;
+ else if (pp->pkt[0] != cDONE)
+ drv_stat = ATA_ERR;
+ ata_qc_complete(qc, drv_stat);
+ }
}
return handled;
}
@@ -490,7 +490,7 @@
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
@@ -561,15 +561,15 @@
if ((pp->pkt_dma & 7) != 0) {
printk("bad alignment for pp->pkt_dma: %08x\n",
(u32)pp->pkt_dma);
- goto err_out_kfree2;
+ dma_free_coherent(dev, ADMA_PKT_BYTES,
+ pp->pkt, pp->pkt_dma);
+ goto err_out_kfree;
}
memset(pp->pkt, 0, ADMA_PKT_BYTES);
ap->private_data = pp;
adma_reinit_engine(ap);
return 0;
-err_out_kfree2:
- kfree(pp);
err_out_kfree:
kfree(pp);
err_out:
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index eee93b0..63911f1 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -195,6 +195,8 @@
static struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
@@ -207,6 +209,8 @@
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 250dafa..1aaf330 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -433,7 +433,7 @@
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
/* check main status, clearing INTRQ */
- u8 status = ata_chk_status(ap);
+ u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index e0f9570..46208f5 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -84,6 +84,8 @@
/* Port stride */
#define K2_SATA_PORT_OFFSET 0x100
+static u8 k2_stat_check_status(struct ata_port *ap);
+
static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
@@ -136,16 +138,24 @@
static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = k2_stat_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 5af05fd..54273e0 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -153,16 +153,24 @@
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u16 nsect, lbal, lbam, lbah;
+ u16 nsect, lbal, lbam, lbah, feature;
- nsect = tf->nsect = readw(ioaddr->nsect_addr);
- lbal = tf->lbal = readw(ioaddr->lbal_addr);
- lbam = tf->lbam = readw(ioaddr->lbam_addr);
- lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->command = ata_check_status(ap);
tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = readb(ioaddr->error_addr);
+ tf->hob_feature = feature >> 8;
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
new file mode 100644
index 0000000..bef23bb
--- /dev/null
+++ b/include/linux/fs_enet_pd.h
@@ -0,0 +1,136 @@
+/*
+ * Platform information definitions for the
+ * universal Freescale Ethernet driver.
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_ENET_PD_H
+#define FS_ENET_PD_H
+
+#include <linux/version.h>
+#include <asm/types.h>
+
+#define FS_ENET_NAME "fs_enet"
+
+enum fs_id {
+ fsid_fec1,
+ fsid_fec2,
+ fsid_fcc1,
+ fsid_fcc2,
+ fsid_fcc3,
+ fsid_scc1,
+ fsid_scc2,
+ fsid_scc3,
+ fsid_scc4,
+};
+
+#define FS_MAX_INDEX 9
+
+static inline int fs_get_fec_index(enum fs_id id)
+{
+ if (id >= fsid_fec1 && id <= fsid_fec2)
+ return id - fsid_fec1;
+ return -1;
+}
+
+static inline int fs_get_fcc_index(enum fs_id id)
+{
+ if (id >= fsid_fcc1 && id <= fsid_fcc3)
+ return id - fsid_fcc1;
+ return -1;
+}
+
+static inline int fs_get_scc_index(enum fs_id id)
+{
+ if (id >= fsid_scc1 && id <= fsid_scc4)
+ return id - fsid_scc1;
+ return -1;
+}
+
+enum fs_mii_method {
+ fsmii_fixed,
+ fsmii_fec,
+ fsmii_bitbang,
+};
+
+enum fs_ioport {
+ fsiop_porta,
+ fsiop_portb,
+ fsiop_portc,
+ fsiop_portd,
+ fsiop_porte,
+};
+
+struct fs_mii_bus_info {
+ int method; /* mii method */
+ int id; /* the id of the mii_bus */
+ int disable_aneg; /* if the controller needs to negothiate speed & duplex */
+ int lpa; /* the default board-specific vallues will be applied otherwise */
+
+ union {
+ struct {
+ int duplex;
+ int speed;
+ } fixed;
+
+ struct {
+ /* nothing */
+ } fec;
+
+ struct {
+ /* nothing */
+ } scc;
+
+ struct {
+ int mdio_port; /* port & bit for MDIO */
+ int mdio_bit;
+ int mdc_port; /* port & bit for MDC */
+ int mdc_bit;
+ int delay; /* delay in us */
+ } bitbang;
+ } i;
+};
+
+struct fs_platform_info {
+
+ void(*init_ioports)(void);
+ /* device specific information */
+ int fs_no; /* controller index */
+
+ u32 cp_page; /* CPM page */
+ u32 cp_block; /* CPM sblock */
+
+ u32 clk_trx; /* some stuff for pins & mux configuration*/
+ u32 clk_route;
+ u32 clk_mask;
+
+ u32 mem_offset;
+ u32 dpram_offset;
+ u32 fcc_regs_c;
+
+ u32 device_flags;
+
+ int phy_addr; /* the phy address (-1 no phy) */
+ int phy_irq; /* the phy irq (if it exists) */
+
+ const struct fs_mii_bus_info *bus_info;
+
+ int rx_ring, tx_ring; /* number of buffers on rx */
+ __u8 macaddr[6]; /* mac address */
+ int rx_copybreak; /* limit we copy small frames */
+ int use_napi; /* use NAPI */
+ int napi_weight; /* NAPI weight */
+
+ int use_rmii; /* use RMII mode */
+};
+
+#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 467a096..5619200 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1788,11 +1788,13 @@
#define PCI_DEVICE_ID_TIGON3_5721 0x1659
#define PCI_DEVICE_ID_TIGON3_5705M 0x165d
#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e
+#define PCI_DEVICE_ID_TIGON3_5714 0x1668
#define PCI_DEVICE_ID_TIGON3_5780 0x166a
#define PCI_DEVICE_ID_TIGON3_5780S 0x166b
#define PCI_DEVICE_ID_TIGON3_5705F 0x166e
#define PCI_DEVICE_ID_TIGON3_5750 0x1676
#define PCI_DEVICE_ID_TIGON3_5751 0x1677
+#define PCI_DEVICE_ID_TIGON3_5715 0x1678
#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
#define PCI_DEVICE_ID_TIGON3_5751M 0x167d
#define PCI_DEVICE_ID_TIGON3_5751F 0x167e
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 30bb4a8..2250a18 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -237,8 +237,7 @@
static __inline__ void ax25_cb_put(ax25_cb *ax25)
{
if (atomic_dec_and_test(&ax25->refcount)) {
- if (ax25->digipeat)
- kfree(ax25->digipeat);
+ kfree(ax25->digipeat);
kfree(ax25);
}
}
diff --git a/include/net/netrom.h b/include/net/netrom.h
index a6bf6e0..a5ee53b 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -136,8 +136,7 @@
static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
{
if (atomic_dec_and_test(&nr_neigh->refcount)) {
- if (nr_neigh->digipeat != NULL)
- kfree(nr_neigh->digipeat);
+ kfree(nr_neigh->digipeat);
kfree(nr_neigh);
}
}
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index b361172..6cb1e27 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -116,6 +116,9 @@
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
+/* Values for T10/04-262r7 */
+#define ATA_16 0x85 /* 16-byte pass-thru */
+#define ATA_12 0xa1 /* 12-byte pass-thru */
/*
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft