| /* |
| * Freescale QUICC Engine USB Host Controller Driver |
| * |
| * Copyright (c) Freescale Semicondutor, Inc. 2006. |
| * Shlomi Gridish <gridish@freescale.com> |
| * Jerry Huang <Chang-Ming.Huang@freescale.com> |
| * Copyright (c) Logic Product Development, Inc. 2007 |
| * Peter Barada <peterb@logicpd.com> |
| * Copyright (c) MontaVista Software, Inc. 2008. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/spinlock.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/gpio.h> |
| #include <asm/qe.h> |
| #include "fhci.h" |
| |
| /* virtual root hub specific descriptor */ |
| static u8 root_hub_des[] = { |
| 0x09, /* blength */ |
| 0x29, /* bDescriptorType;hub-descriptor */ |
| 0x01, /* bNbrPorts */ |
| HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */ |
| 0x00, /* per-port power, no overcurrent */ |
| 0x01, /* bPwrOn2pwrGood;2ms */ |
| 0x00, /* bHubContrCurrent;0mA */ |
| 0x00, /* DeviceRemoveable */ |
| 0xff, /* PortPwrCtrlMask */ |
| }; |
| |
| static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) |
| { |
| int gpio = fhci->gpios[gpio_nr]; |
| bool alow = fhci->alow_gpios[gpio_nr]; |
| |
| if (!gpio_is_valid(gpio)) |
| return; |
| |
| gpio_set_value(gpio, on ^ alow); |
| mdelay(5); |
| } |
| |
| void fhci_config_transceiver(struct fhci_hcd *fhci, |
| enum fhci_port_status status) |
| { |
| fhci_dbg(fhci, "-> %s: %d\n", __func__, status); |
| |
| switch (status) { |
| case FHCI_PORT_POWER_OFF: |
| fhci_gpio_set_value(fhci, GPIO_POWER, false); |
| break; |
| case FHCI_PORT_DISABLED: |
| case FHCI_PORT_WAITING: |
| fhci_gpio_set_value(fhci, GPIO_POWER, true); |
| break; |
| case FHCI_PORT_LOW: |
| fhci_gpio_set_value(fhci, GPIO_SPEED, false); |
| break; |
| case FHCI_PORT_FULL: |
| fhci_gpio_set_value(fhci, GPIO_SPEED, true); |
| break; |
| default: |
| WARN_ON(1); |
| break; |
| } |
| |
| fhci_dbg(fhci, "<- %s: %d\n", __func__, status); |
| } |
| |
| /* disable the USB port by clearing the EN bit in the USBMOD register */ |
| void fhci_port_disable(struct fhci_hcd *fhci) |
| { |
| struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; |
| enum fhci_port_status port_status; |
| |
| fhci_dbg(fhci, "-> %s\n", __func__); |
| |
| fhci_stop_sof_timer(fhci); |
| |
| fhci_flush_all_transmissions(usb); |
| |
| fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); |
| port_status = usb->port_status; |
| usb->port_status = FHCI_PORT_DISABLED; |
| |
| /* Enable IDLE since we want to know if something comes along */ |
| usb->saved_msk |= USB_E_IDLE_MASK; |
| out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); |
| |
| /* check if during the disconnection process attached new device */ |
| if (port_status == FHCI_PORT_WAITING) |
| fhci_device_connected_interrupt(fhci); |
| usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; |
| usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; |
| fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); |
| |
| fhci_dbg(fhci, "<- %s\n", __func__); |
| } |
| |
| /* enable the USB port by setting the EN bit in the USBMOD register */ |
| void fhci_port_enable(void *lld) |
| { |
| struct fhci_usb *usb = (struct fhci_usb *)lld; |
| struct fhci_hcd *fhci = usb->fhci; |
| |
| fhci_dbg(fhci, "-> %s\n", __func__); |
| |
| fhci_config_transceiver(fhci, usb->port_status); |
| |
| if ((usb->port_status != FHCI_PORT_FULL) && |
| (usb->port_status != FHCI_PORT_LOW)) |
| fhci_start_sof_timer(fhci); |
| |
| usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; |
| usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; |
| |
| fhci_dbg(fhci, "<- %s\n", __func__); |
| } |
| |
| void fhci_io_port_generate_reset(struct fhci_hcd *fhci) |
| { |
| fhci_dbg(fhci, "-> %s\n", __func__); |
| |
| gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); |
| gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); |
| gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); |
| |
| mdelay(5); |
| |
| qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); |
| qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); |
| qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); |
| |
| fhci_dbg(fhci, "<- %s\n", __func__); |
| } |
| |
| /* generate the RESET condition on the bus */ |
| void fhci_port_reset(void *lld) |
| { |
| struct fhci_usb *usb = (struct fhci_usb *)lld; |
| struct fhci_hcd *fhci = usb->fhci; |
| u8 mode; |
| u16 mask; |
| |
| fhci_dbg(fhci, "-> %s\n", __func__); |
| |
| fhci_stop_sof_timer(fhci); |
| /* disable the USB controller */ |
| mode = in_8(&fhci->regs->usb_usmod); |
| out_8(&fhci->regs->usb_usmod, mode & (~USB_MODE_EN)); |
| |
| /* disable idle interrupts */ |
| mask = in_be16(&fhci->regs->usb_usbmr); |
| out_be16(&fhci->regs->usb_usbmr, mask & (~USB_E_IDLE_MASK)); |
| |
| fhci_io_port_generate_reset(fhci); |
| |
| /* enable interrupt on this endpoint */ |
| out_be16(&fhci->regs->usb_usbmr, mask); |
| |
| /* enable the USB controller */ |
| mode = in_8(&fhci->regs->usb_usmod); |
| out_8(&fhci->regs->usb_usmod, mode | USB_MODE_EN); |
| fhci_start_sof_timer(fhci); |
| |
| fhci_dbg(fhci, "<- %s\n", __func__); |
| } |
| |
| int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) |
| { |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); |
| int ret = 0; |
| unsigned long flags; |
| |
| fhci_dbg(fhci, "-> %s\n", __func__); |
| |
| spin_lock_irqsave(&fhci->lock, flags); |
| |
| if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | |
| USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | |
| USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { |
| *buf = 1 << 1; |
| ret = 1; |
| fhci_dbg(fhci, "-- %s\n", __func__); |
| } |
| |
| spin_unlock_irqrestore(&fhci->lock, flags); |
| |
| fhci_dbg(fhci, "<- %s\n", __func__); |
| |
| return ret; |
| } |
| |
| int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, |
| u16 wIndex, char *buf, u16 wLength) |
| { |
| struct fhci_hcd *fhci = hcd_to_fhci(hcd); |
| int retval = 0; |
| struct usb_hub_status *hub_status; |
| struct usb_port_status *port_status; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&fhci->lock, flags); |
| |
| fhci_dbg(fhci, "-> %s\n", __func__); |
| |
| switch (typeReq) { |
| case ClearHubFeature: |
| switch (wValue) { |
| case C_HUB_LOCAL_POWER: |
| case C_HUB_OVER_CURRENT: |
| break; |
| default: |
| goto error; |
| } |
| break; |
| case ClearPortFeature: |
| fhci->vroot_hub->feature &= (1 << wValue); |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| fhci->vroot_hub->port.wPortStatus &= |
| ~USB_PORT_STAT_ENABLE; |
| fhci_port_disable(fhci); |
| break; |
| case USB_PORT_FEAT_C_ENABLE: |
| fhci->vroot_hub->port.wPortChange &= |
| ~USB_PORT_STAT_C_ENABLE; |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| fhci->vroot_hub->port.wPortStatus &= |
| ~USB_PORT_STAT_SUSPEND; |
| fhci_stop_sof_timer(fhci); |
| break; |
| case USB_PORT_FEAT_C_SUSPEND: |
| fhci->vroot_hub->port.wPortChange &= |
| ~USB_PORT_STAT_C_SUSPEND; |
| break; |
| case USB_PORT_FEAT_POWER: |
| fhci->vroot_hub->port.wPortStatus &= |
| ~USB_PORT_STAT_POWER; |
| fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); |
| break; |
| case USB_PORT_FEAT_C_CONNECTION: |
| fhci->vroot_hub->port.wPortChange &= |
| ~USB_PORT_STAT_C_CONNECTION; |
| break; |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| fhci->vroot_hub->port.wPortChange &= |
| ~USB_PORT_STAT_C_OVERCURRENT; |
| break; |
| case USB_PORT_FEAT_C_RESET: |
| fhci->vroot_hub->port.wPortChange &= |
| ~USB_PORT_STAT_C_RESET; |
| break; |
| default: |
| goto error; |
| } |
| break; |
| case GetHubDescriptor: |
| memcpy(buf, root_hub_des, sizeof(root_hub_des)); |
| break; |
| case GetHubStatus: |
| hub_status = (struct usb_hub_status *)buf; |
| hub_status->wHubStatus = |
| cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); |
| hub_status->wHubChange = |
| cpu_to_le16(fhci->vroot_hub->hub.wHubChange); |
| break; |
| case GetPortStatus: |
| port_status = (struct usb_port_status *)buf; |
| port_status->wPortStatus = |
| cpu_to_le16(fhci->vroot_hub->port.wPortStatus); |
| port_status->wPortChange = |
| cpu_to_le16(fhci->vroot_hub->port.wPortChange); |
| break; |
| case SetHubFeature: |
| switch (wValue) { |
| case C_HUB_OVER_CURRENT: |
| case C_HUB_LOCAL_POWER: |
| break; |
| default: |
| goto error; |
| } |
| break; |
| case SetPortFeature: |
| fhci->vroot_hub->feature |= (1 << wValue); |
| |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| fhci->vroot_hub->port.wPortStatus |= |
| USB_PORT_STAT_ENABLE; |
| fhci_port_enable(fhci->usb_lld); |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| fhci->vroot_hub->port.wPortStatus |= |
| USB_PORT_STAT_SUSPEND; |
| fhci_stop_sof_timer(fhci); |
| break; |
| case USB_PORT_FEAT_RESET: |
| fhci->vroot_hub->port.wPortStatus |= |
| USB_PORT_STAT_RESET; |
| fhci_port_reset(fhci->usb_lld); |
| fhci->vroot_hub->port.wPortStatus |= |
| USB_PORT_STAT_ENABLE; |
| fhci->vroot_hub->port.wPortStatus &= |
| ~USB_PORT_STAT_RESET; |
| break; |
| case USB_PORT_FEAT_POWER: |
| fhci->vroot_hub->port.wPortStatus |= |
| USB_PORT_STAT_POWER; |
| fhci_config_transceiver(fhci, FHCI_PORT_WAITING); |
| break; |
| default: |
| goto error; |
| } |
| break; |
| default: |
| error: |
| retval = -EPIPE; |
| } |
| |
| fhci_dbg(fhci, "<- %s\n", __func__); |
| |
| spin_unlock_irqrestore(&fhci->lock, flags); |
| |
| return retval; |
| } |