| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com> |
| * Copyright (C) 2015 John Crispin <john@phrozen.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| |
| #include <asm/mipsregs.h> |
| #include <asm/smp-ops.h> |
| #include <asm/mips-cm.h> |
| #include <asm/mips-cpc.h> |
| #include <asm/mach-ralink/ralink_regs.h> |
| #include <asm/mach-ralink/mt7621.h> |
| |
| #include <pinmux.h> |
| |
| #include "common.h" |
| |
| #define SYSC_REG_SYSCFG 0x10 |
| #define SYSC_REG_CPLL_CLKCFG0 0x2c |
| #define SYSC_REG_CUR_CLK_STS 0x44 |
| #define CPU_CLK_SEL (BIT(30) | BIT(31)) |
| |
| #define MT7621_GPIO_MODE_UART1 1 |
| #define MT7621_GPIO_MODE_I2C 2 |
| #define MT7621_GPIO_MODE_UART3_MASK 0x3 |
| #define MT7621_GPIO_MODE_UART3_SHIFT 3 |
| #define MT7621_GPIO_MODE_UART3_GPIO 1 |
| #define MT7621_GPIO_MODE_UART2_MASK 0x3 |
| #define MT7621_GPIO_MODE_UART2_SHIFT 5 |
| #define MT7621_GPIO_MODE_UART2_GPIO 1 |
| #define MT7621_GPIO_MODE_JTAG 7 |
| #define MT7621_GPIO_MODE_WDT_MASK 0x3 |
| #define MT7621_GPIO_MODE_WDT_SHIFT 8 |
| #define MT7621_GPIO_MODE_WDT_GPIO 1 |
| #define MT7621_GPIO_MODE_PCIE_RST 0 |
| #define MT7621_GPIO_MODE_PCIE_REF 2 |
| #define MT7621_GPIO_MODE_PCIE_MASK 0x3 |
| #define MT7621_GPIO_MODE_PCIE_SHIFT 10 |
| #define MT7621_GPIO_MODE_PCIE_GPIO 1 |
| #define MT7621_GPIO_MODE_MDIO_MASK 0x3 |
| #define MT7621_GPIO_MODE_MDIO_SHIFT 12 |
| #define MT7621_GPIO_MODE_MDIO_GPIO 1 |
| #define MT7621_GPIO_MODE_RGMII1 14 |
| #define MT7621_GPIO_MODE_RGMII2 15 |
| #define MT7621_GPIO_MODE_SPI_MASK 0x3 |
| #define MT7621_GPIO_MODE_SPI_SHIFT 16 |
| #define MT7621_GPIO_MODE_SPI_GPIO 1 |
| #define MT7621_GPIO_MODE_SDHCI_MASK 0x3 |
| #define MT7621_GPIO_MODE_SDHCI_SHIFT 18 |
| #define MT7621_GPIO_MODE_SDHCI_GPIO 1 |
| |
| static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) }; |
| static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) }; |
| static struct rt2880_pmx_func uart3_grp[] = { |
| FUNC("uart3", 0, 5, 4), |
| FUNC("i2s", 2, 5, 4), |
| FUNC("spdif3", 3, 5, 4), |
| }; |
| static struct rt2880_pmx_func uart2_grp[] = { |
| FUNC("uart2", 0, 9, 4), |
| FUNC("pcm", 2, 9, 4), |
| FUNC("spdif2", 3, 9, 4), |
| }; |
| static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) }; |
| static struct rt2880_pmx_func wdt_grp[] = { |
| FUNC("wdt rst", 0, 18, 1), |
| FUNC("wdt refclk", 2, 18, 1), |
| }; |
| static struct rt2880_pmx_func pcie_rst_grp[] = { |
| FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1), |
| FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1) |
| }; |
| static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) }; |
| static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) }; |
| static struct rt2880_pmx_func spi_grp[] = { |
| FUNC("spi", 0, 34, 7), |
| FUNC("nand1", 2, 34, 7), |
| }; |
| static struct rt2880_pmx_func sdhci_grp[] = { |
| FUNC("sdhci", 0, 41, 8), |
| FUNC("nand2", 2, 41, 8), |
| }; |
| static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) }; |
| |
| static struct rt2880_pmx_group mt7621_pinmux_data[] = { |
| GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1), |
| GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C), |
| GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK, |
| MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT), |
| GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK, |
| MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT), |
| GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG), |
| GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK, |
| MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT), |
| GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK, |
| MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT), |
| GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK, |
| MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT), |
| GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2), |
| GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK, |
| MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT), |
| GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK, |
| MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT), |
| GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1), |
| { 0 } |
| }; |
| |
| phys_addr_t mips_cpc_default_phys_base(void) |
| { |
| panic("Cannot detect cpc address"); |
| } |
| |
| void __init ralink_clk_init(void) |
| { |
| int cpu_fdiv = 0; |
| int cpu_ffrac = 0; |
| int fbdiv = 0; |
| u32 clk_sts, syscfg; |
| u8 clk_sel = 0, xtal_mode; |
| u32 cpu_clk; |
| |
| if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0) |
| clk_sel = 1; |
| |
| switch (clk_sel) { |
| case 0: |
| clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); |
| cpu_fdiv = ((clk_sts >> 8) & 0x1F); |
| cpu_ffrac = (clk_sts & 0x1F); |
| cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; |
| break; |
| |
| case 1: |
| fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; |
| syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); |
| xtal_mode = (syscfg >> 6) & 0x7; |
| if (xtal_mode >= 6) { |
| /* 25Mhz Xtal */ |
| cpu_clk = 25 * fbdiv * 1000 * 1000; |
| } else if (xtal_mode >= 3) { |
| /* 40Mhz Xtal */ |
| cpu_clk = 40 * fbdiv * 1000 * 1000; |
| } else { |
| /* 20Mhz Xtal */ |
| cpu_clk = 20 * fbdiv * 1000 * 1000; |
| } |
| break; |
| } |
| } |
| |
| void __init ralink_of_remap(void) |
| { |
| rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); |
| rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc"); |
| |
| if (!rt_sysc_membase || !rt_memc_membase) |
| panic("Failed to remap core resources"); |
| } |
| |
| void prom_soc_init(struct ralink_soc_info *soc_info) |
| { |
| void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); |
| unsigned char *name = NULL; |
| u32 n0; |
| u32 n1; |
| u32 rev; |
| |
| n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); |
| n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); |
| |
| if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) { |
| name = "MT7621"; |
| soc_info->compatible = "mtk,mt7621-soc"; |
| } else { |
| panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1); |
| } |
| ralink_soc = MT762X_SOC_MT7621AT; |
| rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); |
| |
| snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, |
| "MediaTek %s ver:%u eco:%u", |
| name, |
| (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, |
| (rev & CHIP_REV_ECO_MASK)); |
| |
| soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN; |
| soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX; |
| soc_info->mem_base = MT7621_DRAM_BASE; |
| |
| rt2880_pinmux_data = mt7621_pinmux_data; |
| |
| /* Early detection of CMP support */ |
| mips_cm_probe(); |
| mips_cpc_probe(); |
| |
| if (mips_cm_numiocu()) { |
| /* |
| * mips_cm_probe() wipes out bootloader |
| * config for CM regions and we have to configure them |
| * again. This SoC cannot talk to pamlbus devices |
| * witout proper iocu region set up. |
| * |
| * FIXME: it would be better to do this with values |
| * from DT, but we need this very early because |
| * without this we cannot talk to pretty much anything |
| * including serial. |
| */ |
| write_gcr_reg0_base(MT7621_PALMBUS_BASE); |
| write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | |
| CM_GCR_REGn_MASK_CMTGT_IOCU0); |
| } |
| |
| if (!register_cps_smp_ops()) |
| return; |
| if (!register_cmp_smp_ops()) |
| return; |
| if (!register_vsmp_smp_ops()) |
| return; |
| } |