PM: Rework struct platform_suspend_ops
There is no reason why the .prepare() and .finish() methods in 'struct
platform_suspend_ops' should take any arguments, since architectures don't use
these methods' argument in any practically meaningful way (ie. either the
target system sleep state is conveyed to the platform by .set_target(), or
there is only one suspend state supported and it is indicated to the PM core
by .valid(), or .prepare() and .finish() aren't defined at all). There also
is no reason why .finish() should return any result.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 8db38dd..3bf01e2 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -599,27 +599,15 @@
/*
* omap_pm_prepare - Do preliminary suspend work.
- * @state: suspend state we're entering.
*
*/
-static int omap_pm_prepare(suspend_state_t state)
+static int omap_pm_prepare(void)
{
- int error = 0;
-
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- break;
- default:
- return -EINVAL;
- }
-
- return error;
+ return 0;
}
@@ -647,16 +635,14 @@
/**
* omap_pm_finish - Finish up suspend sequence.
- * @state: State we're coming out of.
*
* This is called after we wake back up (or if entering the sleep state
* failed).
*/
-static int omap_pm_finish(suspend_state_t state)
+static void omap_pm_finish(void)
{
pm_idle = saved_idle;
- return 0;
}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 9aaa7a2..baf7d82 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -70,25 +70,12 @@
local_irq_enable();
}
-static int omap2_pm_prepare(suspend_state_t state)
+static int omap2_pm_prepare(void)
{
- int error = 0;
-
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- break;
-
- default:
- return -EINVAL;
- }
-
- return error;
+ return 0;
}
#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
@@ -356,10 +343,9 @@
return ret;
}
-static int omap2_pm_finish(suspend_state_t state)
+static void omap2_pm_finish(void)
{
pm_idle = saved_idle;
- return 0;
}
static struct platform_suspend_ops omap_pm_ops = {
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 6901891..dac51fb 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -89,28 +89,15 @@
#endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
}
-
/*
- * bfin_pm_prepare - Do preliminary suspend work.
- * @state: suspend state we're entering.
+ * bfin_pm_valid - Tell the PM core that we only support the standby sleep
+ * state
+ * @state: suspend state we're checking.
*
*/
-static int bfin_pm_prepare(suspend_state_t state)
+static int bfin_pm_valid(suspend_state_t state)
{
- int error = 0;
-
- switch (state) {
- case PM_SUSPEND_STANDBY:
- break;
-
- case PM_SUSPEND_MEM:
- return -ENOTSUPP;
-
- default:
- return -EINVAL;
- }
-
- return error;
+ return (state == PM_SUSPEND_STANDBY);
}
/*
@@ -135,38 +122,8 @@
return 0;
}
-/*
- * bfin_pm_finish - Finish up suspend sequence.
- * @state: State we're coming out of.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-static int bfin_pm_finish(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_STANDBY:
- break;
-
- case PM_SUSPEND_MEM:
- return -ENOTSUPP;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int bfin_pm_valid(suspend_state_t state)
-{
- return (state == PM_SUSPEND_STANDBY);
-}
-
struct platform_suspend_ops bfin_pm_ops = {
- .prepare = bfin_pm_prepare,
.enter = bfin_pm_enter,
- .finish = bfin_pm_finish,
.valid = bfin_pm_valid,
};
diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c
index f26afcd..ffa14af 100644
--- a/arch/powerpc/platforms/52xx/lite5200_pm.c
+++ b/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -1,5 +1,5 @@
#include <linux/init.h>
-#include <linux/pm.h>
+#include <linux/suspend.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/mpc52xx.h>
@@ -18,6 +18,8 @@
static const int sram_size = 0x4000; /* 16 kBytes */
static void __iomem *mbar;
+static suspend_state_t lite5200_pm_target_state;
+
static int lite5200_pm_valid(suspend_state_t state)
{
switch (state) {
@@ -29,13 +31,22 @@
}
}
-static int lite5200_pm_prepare(suspend_state_t state)
+static int lite5200_pm_set_target(suspend_state_t state)
+{
+ if (lite5200_pm_valid(state)) {
+ lite5200_pm_target_state = state;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int lite5200_pm_prepare(void)
{
/* deep sleep? let mpc52xx code handle that */
- if (state == PM_SUSPEND_STANDBY)
- return mpc52xx_pm_prepare(state);
+ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+ return mpc52xx_pm_prepare();
- if (state != PM_SUSPEND_MEM)
+ if (lite5200_pm_target_state != PM_SUSPEND_MEM)
return -EINVAL;
/* map registers */
@@ -190,17 +201,16 @@
return 0;
}
-static int lite5200_pm_finish(suspend_state_t state)
+static void lite5200_pm_finish(void)
{
/* deep sleep? let mpc52xx code handle that */
- if (state == PM_SUSPEND_STANDBY) {
- return mpc52xx_pm_finish(state);
- }
- return 0;
+ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY)
+ mpc52xx_pm_finish();
}
-static struct pm_ops lite5200_pm_ops = {
+static struct platform_suspend_ops lite5200_pm_ops = {
.valid = lite5200_pm_valid,
+ .set_target = lite5200_pm_set_target,
.prepare = lite5200_pm_prepare,
.enter = lite5200_pm_enter,
.finish = lite5200_pm_finish,
@@ -208,6 +218,6 @@
int __init lite5200_pm_init(void)
{
- pm_set_ops(&lite5200_pm_ops);
+ suspend_set_ops(&lite5200_pm_ops);
return 0;
}
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index 44fb064..7ffa7ba 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -57,11 +57,8 @@
return 0;
}
-int mpc52xx_pm_prepare(suspend_state_t state)
+int mpc52xx_pm_prepare(void)
{
- if (state != PM_SUSPEND_STANDBY)
- return -EINVAL;
-
/* map the whole register space */
mbar = mpc52xx_find_and_map("mpc5200");
if (!mbar) {
@@ -166,15 +163,13 @@
return 0;
}
-int mpc52xx_pm_finish(suspend_state_t state)
+void mpc52xx_pm_finish(void)
{
/* call board resume code */
if (mpc52xx_suspend.board_resume_finish)
mpc52xx_suspend.board_resume_finish(mbar);
iounmap(mbar);
-
- return 0;
}
static struct platform_suspend_ops mpc52xx_pm_ops = {
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 3271850a..c58dd0b 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -85,13 +85,12 @@
/**
* acpi_pm_prepare - Do preliminary suspend work.
- * @pm_state: ignored
*
* If necessary, set the firmware waking vector and do arch-specific
* nastiness to get the wakeup code to the waking vector.
*/
-static int acpi_pm_prepare(suspend_state_t pm_state)
+static int acpi_pm_prepare(void)
{
int error = acpi_sleep_prepare(acpi_target_sleep_state);
@@ -160,13 +159,12 @@
/**
* acpi_pm_finish - Finish up suspend sequence.
- * @pm_state: ignored
*
* This is called after we wake back up (or if entering the sleep state
* failed).
*/
-static int acpi_pm_finish(suspend_state_t pm_state)
+static void acpi_pm_finish(void)
{
u32 acpi_state = acpi_target_sleep_state;
@@ -184,7 +182,6 @@
init_8259A(0);
}
#endif
- return 0;
}
static int acpi_pm_state_valid(suspend_state_t pm_state)
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index 24751df..568135f 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -18,6 +18,8 @@
#include <asm/prom.h>
#endif /* __ASSEMBLY__ */
+#include <linux/suspend.h>
+
/* ======================================================================== */
/* Structures mapping of some unit register set */
@@ -267,9 +269,9 @@
extern int __init lite5200_pm_init(void);
/* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_prepare(void);
extern int mpc52xx_pm_enter(suspend_state_t);
-extern int mpc52xx_pm_finish(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
#endif
#endif /* CONFIG_PM */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index dce4782..541f0c4 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -46,12 +46,10 @@
* @prepare() fails. If @set_target() fails (ie. returns nonzero),
* @prepare(), @enter() and @finish() will not be called by the PM core.
* This callback is optional. However, if it is implemented, the argument
- * passed to @prepare(), @enter() and @finish() is meaningless and should
- * be ignored.
+ * passed to @enter() is meaningless and should be ignored.
*
* @prepare: Prepare the platform for entering the system sleep state indicated
- * by @set_target() or represented by the argument if @set_target() is not
- * implemented.
+ * by @set_target().
* @prepare() is called right after devices have been suspended (ie. the
* appropriate .suspend() method has been executed for each device) and
* before the nonboot CPUs are disabled (it is executed with IRQs enabled).
@@ -67,8 +65,7 @@
*
* @finish: Called when the system has just left a sleep state, right after
* the nonboot CPUs have been enabled and before devices are resumed (it is
- * executed with IRQs enabled). If @set_target() is not implemented, the
- * argument represents the sleep state being left.
+ * executed with IRQs enabled).
* This callback is optional, but should be implemented by the platforms
* that implement @prepare(). If implemented, it is always called after
* @enter() (even if @enter() fails).
@@ -76,9 +73,9 @@
struct platform_suspend_ops {
int (*valid)(suspend_state_t state);
int (*set_target)(suspend_state_t state);
- int (*prepare)(suspend_state_t state);
+ int (*prepare)(void);
int (*enter)(suspend_state_t state);
- int (*finish)(suspend_state_t state);
+ void (*finish)(void);
};
#ifdef CONFIG_SUSPEND
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 854bf08..7d09a98 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -58,13 +58,6 @@
return state == PM_SUSPEND_MEM;
}
-
-static inline void pm_finish(suspend_state_t state)
-{
- if (suspend_ops->finish)
- suspend_ops->finish(state);
-}
-
/**
* suspend_prepare - Do prep work before entering low-power state.
*
@@ -171,7 +164,7 @@
goto Resume_console;
}
if (suspend_ops->prepare) {
- error = suspend_ops->prepare(state);
+ error = suspend_ops->prepare();
if (error)
goto Resume_devices;
}
@@ -180,7 +173,8 @@
suspend_enter(state);
enable_nonboot_cpus();
- pm_finish(state);
+ if (suspend_ops->finish)
+ suspend_ops->finish();
Resume_devices:
device_resume();
Resume_console: