rapidio: add Port-Write handling for EM
Add RapidIO Port-Write message handling in the context of Error
Management Extensions Specification Rev.1.3.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index cbf0d5f..74633cc 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -4,6 +4,10 @@
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -31,15 +35,16 @@
LIST_HEAD(rio_devices);
static LIST_HEAD(rio_switches);
-#define RIO_ENUM_CMPL_MAGIC 0xdeadbeef
-
static void rio_enum_timeout(unsigned long);
+static void rio_init_em(struct rio_dev *rdev);
+
DEFINE_SPINLOCK(rio_global_list_lock);
static int next_destid = 0;
static int next_switchid = 0;
static int next_net = 0;
+static int next_comptag;
static struct timer_list rio_enum_timer =
TIMER_INITIALIZER(rio_enum_timeout, 0, 0);
@@ -52,13 +57,6 @@
-1,
};
-static int rio_sport_phys_table[] = {
- RIO_EFB_PAR_EP_FREE_ID,
- RIO_EFB_SER_EP_FREE_ID,
- RIO_EFB_SER_EP_FREC_ID,
- -1,
-};
-
/**
* rio_get_device_id - Get the base/extended device id for a device
* @port: RIO master port
@@ -119,12 +117,26 @@
u32 result;
int ret = 0;
- /* Write component tag CSR magic complete value */
- rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR,
- RIO_ENUM_CMPL_MAGIC);
- list_for_each_entry(rdev, &rio_devices, global_list)
- rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR,
- RIO_ENUM_CMPL_MAGIC);
+ /* Assign component tag to all devices */
+ next_comptag = 1;
+ rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR, next_comptag++);
+
+ list_for_each_entry(rdev, &rio_devices, global_list) {
+ /* Mark device as discovered */
+ rio_read_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ &result);
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ result | RIO_PORT_GEN_DISCOVERED);
+
+ rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR, next_comptag);
+ rdev->comp_tag = next_comptag++;
+ if (next_comptag >= 0x10000) {
+ pr_err("RIO: Component Tag Counter Overflow\n");
+ break;
+ }
+ }
/* Release host device id locks */
rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
@@ -267,6 +279,30 @@
}
/**
+ * rio_em_set_ops- Sets Error Managment operations for a particular vendor switch
+ * @rdev: RIO device
+ *
+ * Searches the RIO EM ops table for known switch types. If the vid
+ * and did match a switch table entry, then set the em_init() and
+ * em_handle() ops to the table entry values.
+ */
+static void rio_em_set_ops(struct rio_dev *rdev)
+{
+ struct rio_em_ops *cur = __start_rio_em_ops;
+ struct rio_em_ops *end = __end_rio_em_ops;
+
+ while (cur < end) {
+ if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+ pr_debug("RIO: adding EM ops for %s\n", rio_name(rdev));
+ rdev->rswitch->em_init = cur->init_hook;
+ rdev->rswitch->em_handle = cur->handler_hook;
+ break;
+ }
+ cur++;
+ }
+}
+
+/**
* rio_add_device- Adds a RIO device to the device model
* @rdev: RIO device
*
@@ -336,8 +372,14 @@
rdev->asm_rev = result >> 16;
rio_mport_read_config_32(port, destid, hopcount, RIO_PEF_CAR,
&rdev->pef);
- if (rdev->pef & RIO_PEF_EXT_FEATURES)
+ if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = result & 0xffff;
+ rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
+ hopcount);
+
+ rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT);
+ }
rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
&rdev->src_ops);
@@ -366,6 +408,7 @@
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
+ rswitch->port_ok = 0;
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
@@ -379,6 +422,7 @@
dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
rdev->rswitch->switchid);
rio_route_set_ops(rdev);
+ rio_em_set_ops(rdev);
if (do_enum && rdev->rswitch->clr_table)
rdev->rswitch->clr_table(port, destid, hopcount,
@@ -429,23 +473,29 @@
*
* Reads the port error status CSR for a particular switch port to
* determine if the port has an active link. Returns
- * %PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
* inactive.
*/
static int
rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
{
- u32 result;
+ u32 result = 0;
u32 ext_ftr_ptr;
- int *entry = rio_sport_phys_table;
+ ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
- do {
- if ((ext_ftr_ptr =
- rio_mport_get_feature(port, 0, destid, hopcount, *entry)))
-
+ while (ext_ftr_ptr) {
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &result);
+ result = RIO_GET_BLOCK_ID(result);
+ if ((result == RIO_EFB_SER_EP_FREE_ID) ||
+ (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
+ (result == RIO_EFB_SER_EP_FREC_ID))
break;
- } while (*++entry >= 0);
+
+ ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
+ ext_ftr_ptr);
+ }
if (ext_ftr_ptr)
rio_mport_read_config_32(port, destid, hopcount,
@@ -453,7 +503,7 @@
RIO_PORT_N_ERR_STS_CSR(sport),
&result);
- return (result & PORT_N_ERR_STS_PORT_OK);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
@@ -762,8 +812,10 @@
rio_name(rdev), rdev->vid, rdev->did, num_ports);
sw_destid = next_destid;
for (port_num = 0; port_num < num_ports; port_num++) {
- if (sw_inport == port_num)
+ if (sw_inport == port_num) {
+ rdev->rswitch->port_ok |= (1 << port_num);
continue;
+ }
cur_destid = next_destid;
@@ -773,6 +825,7 @@
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
+ rdev->rswitch->port_ok |= (1 << port_num);
rio_route_add_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
RIO_ANY_DESTID(port->sys_size),
@@ -797,9 +850,28 @@
port_num;
}
}
+ } else {
+ /* If switch supports Error Management,
+ * set PORT_LOCKOUT bit for unused port
+ */
+ if (rdev->em_efptr)
+ rio_set_port_lockout(rdev, port_num, 1);
+
+ rdev->rswitch->port_ok &= ~(1 << port_num);
}
}
+ /* Direct Port-write messages to the enumeratiing host */
+ if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
+ (rdev->em_efptr)) {
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
+ (port->host_deviceid << 16) |
+ (port->sys_size << 15));
+ }
+
+ rio_init_em(rdev);
+
/* Check for empty switch */
if (next_destid == sw_destid) {
next_destid++;
@@ -819,21 +891,16 @@
* rio_enum_complete- Tests if enumeration of a network is complete
* @port: Master port to send transaction
*
- * Tests the Component Tag CSR for presence of the magic enumeration
- * complete flag. Return %1 if enumeration is complete or %0 if
+ * Tests the Component Tag CSR for non-zero value (enumeration
+ * complete flag). Return %1 if enumeration is complete or %0 if
* enumeration is incomplete.
*/
static int rio_enum_complete(struct rio_mport *port)
{
u32 tag_csr;
- int ret = 0;
rio_local_read_config_32(port, RIO_COMPONENT_TAG_CSR, &tag_csr);
-
- if (tag_csr == RIO_ENUM_CMPL_MAGIC)
- ret = 1;
-
- return ret;
+ return (tag_csr & 0xffff) ? 1 : 0;
}
/**
@@ -915,7 +982,7 @@
*
* Reads the port error status CSR for the master port to
* determine if the port has an active link. Returns
- * %PORT_N_ERR_STS_PORT_OK if the master port is active
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the master port is active
* or %0 if it is inactive.
*/
static int rio_mport_is_active(struct rio_mport *port)
@@ -936,7 +1003,7 @@
RIO_PORT_N_ERR_STS_CSR(port->index),
&result);
- return (result & PORT_N_ERR_STS_PORT_OK);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
@@ -1008,6 +1075,32 @@
}
/**
+ * rio_init_em - Initializes RIO Error Management (for switches)
+ * @port: Master port associated with the RIO network
+ *
+ * For each enumerated switch, call device-specific error management
+ * initialization routine (if supplied by the switch driver).
+ */
+static void rio_init_em(struct rio_dev *rdev)
+{
+ if (rio_is_switch(rdev) && (rdev->em_efptr) &&
+ (rdev->rswitch->em_init)) {
+ rdev->rswitch->em_init(rdev);
+ }
+}
+
+/**
+ * rio_pw_enable - Enables/disables port-write handling by a master port
+ * @port: Master port associated with port-write handling
+ * @enable: 1=enable, 0=disable
+ */
+static void rio_pw_enable(struct rio_mport *port, int enable)
+{
+ if (port->ops->pwenable)
+ port->ops->pwenable(port, enable);
+}
+
+/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
*
@@ -1050,6 +1143,7 @@
}
rio_update_route_tables(mport);
rio_clear_locks(mport);
+ rio_pw_enable(mport, 1);
} else {
printk(KERN_INFO "RIO: master port %d link inactive\n",
mport->id);