[ALSA] Gallant SC-6000 driver
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver.
This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio
Plus True 16).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 6b6aa2c..08a26d8 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -191,6 +191,19 @@
To compile this driver as a module, choose M here: the module
will be called snd-es18xx.
+config SND_SC6000
+ tristate "Gallant SC-6000, Audio Excel DSP 16"
+ depends on SND
+ select SND_AD1848_LIB
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ help
+ Say Y here to include support for Gallant SC-6000 card and clones:
+ Audio Excel DSP 16 and Zoltrix AV302.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sc6000.
+
config SND_GUS_SYNTH
tristate
diff --git a/sound/isa/Makefile b/sound/isa/Makefile
index bb317cc..5378d98 100644
--- a/sound/isa/Makefile
+++ b/sound/isa/Makefile
@@ -10,6 +10,7 @@
snd-dt019x-objs := dt019x.o
snd-es18xx-objs := es18xx.o
snd-opl3sa2-objs := opl3sa2.o
+snd-sc6000-objs := sc6000.o
snd-sgalaxy-objs := sgalaxy.o
snd-sscape-objs := sscape.o
@@ -21,6 +22,7 @@
obj-$(CONFIG_SND_DT019X) += snd-dt019x.o
obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o
obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o
+obj-$(CONFIG_SND_SC6000) += snd-sc6000.o
obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o
obj-$(CONFIG_SND_SSCAPE) += snd-sscape.o
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
new file mode 100644
index 0000000..d4a4ccf
--- /dev/null
+++ b/sound/isa/sc6000.c
@@ -0,0 +1,654 @@
+/*
+ * Driver for Gallant SC-6000 soundcard. This card is also known as
+ * Audio Excel DSP 16 or Zoltrix AV302.
+ * These cards use CompuMedia ASC-9308 chip + AD1848 codec.
+ *
+ * Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
+ *
+ * I don't have documentation for this card. I used the driver
+ * for OSS/Free included in the kernel source as reference.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <sound/driver.h>
+#include <linux/module.h>
+#include <linux/isa.h>
+#include <linux/io.h>
+#include <asm/dma.h>
+#include <sound/core.h>
+#include <sound/ad1848.h>
+#include <sound/opl3.h>
+#include <sound/mpu401.h>
+#include <sound/control.h>
+#define SNDRV_LEGACY_FIND_FREE_IRQ
+#define SNDRV_LEGACY_FIND_FREE_DMA
+#include <sound/initval.h>
+
+MODULE_AUTHOR("Krzysztof Helt");
+MODULE_DESCRIPTION("Gallant SC-6000");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Gallant, SC-6000},"
+ "{AudioExcel, Audio Excel DSP 16},"
+ "{Zoltrix, AV302}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
+static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220, 0x240 */
+static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 11 */
+static long mss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x530, 0xe80 */
+static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+ /* 0x300, 0x310, 0x320, 0x330 */
+static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 0 */
+static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0, 1, 3 */
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard.");
+module_param_array(port, long, NULL, 0444);
+MODULE_PARM_DESC(port, "Port # for sc-6000 driver.");
+module_param_array(mss_port, long, NULL, 0444);
+MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver.");
+module_param_array(mpu_port, long, NULL, 0444);
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver.");
+module_param_array(irq, int, NULL, 0444);
+MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver.");
+module_param_array(mpu_irq, int, NULL, 0444);
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
+module_param_array(dma, int, NULL, 0444);
+MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
+
+/*
+ * Commands of SC6000's DSP (SBPRO+special).
+ * Some of them are COMMAND_xx, in the future they may change.
+ */
+#define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
+#define COMMAND_52 0x52 /* */
+#define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
+#define COMMAND_5C 0x5c /* */
+#define COMMAND_60 0x60 /* */
+#define COMMAND_66 0x66 /* */
+#define COMMAND_6C 0x6c /* */
+#define COMMAND_6E 0x6e /* */
+#define COMMAND_88 0x88 /* Unknown command */
+#define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
+#define COMMAND_C5 0xc5 /* */
+#define GET_DSP_VERSION 0xe1 /* Get DSP Version */
+#define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
+
+/*
+ * Offsets of SC6000 DSP I/O ports. The offset is added to base I/O port
+ * to have the actual I/O port.
+ * Register permissions are:
+ * (wo) == Write Only
+ * (ro) == Read Only
+ * (w-) == Write
+ * (r-) == Read
+ */
+#define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
+#define DSP_READ 0x0a /* offset of DSP READ (ro) */
+#define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
+#define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
+#define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
+#define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
+
+#define PFX "sc6000: "
+#define DRV_NAME "SC-6000"
+
+/* hardware dependent functions */
+
+/*
+ * sc6000_irq_to_softcfg - Decode irq number into cfg code.
+ */
+static __devinit unsigned char sc6000_irq_to_softcfg(int irq)
+{
+ unsigned char val = 0;
+
+ switch (irq) {
+ case 5:
+ val = 0x28;
+ break;
+ case 7:
+ val = 0x8;
+ break;
+ case 9:
+ val = 0x10;
+ break;
+ case 10:
+ val = 0x18;
+ break;
+ case 11:
+ val = 0x20;
+ break;
+ default:
+ break;
+ }
+ return val;
+}
+
+/*
+ * sc6000_dma_to_softcfg - Decode dma number into cfg code.
+ */
+static __devinit unsigned char sc6000_dma_to_softcfg(int dma)
+{
+ unsigned char val = 0;
+
+ switch (dma) {
+ case 0:
+ val = 1;
+ break;
+ case 1:
+ val = 2;
+ break;
+ case 3:
+ val = 3;
+ break;
+ default:
+ break;
+ }
+ return val;
+}
+
+/*
+ * sc6000_mpu_irq_to_softcfg - Decode MPU-401 irq number into cfg code.
+ */
+static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
+{
+ unsigned char val = 0;
+
+ switch (mpu_irq) {
+ case 5:
+ val = 4;
+ break;
+ case 7:
+ val = 0x44;
+ break;
+ case 9:
+ val = 0x84;
+ break;
+ case 10:
+ val = 0xc4;
+ break;
+ default:
+ break;
+ }
+ return val;
+}
+
+static __devinit int sc6000_wait_data(char __iomem *vport)
+{
+ int loop = 1000;
+ unsigned char val = 0;
+
+ do {
+ val = ioread8(vport + DSP_DATAVAIL);
+ if (val & 0x80)
+ return 0;
+ cpu_relax();
+ } while (loop--);
+
+ return -EAGAIN;
+}
+
+static __devinit int sc6000_read(char __iomem *vport)
+{
+ if (sc6000_wait_data(vport))
+ return -EBUSY;
+
+ return ioread8(vport + DSP_READ);
+
+}
+
+static __devinit int sc6000_write(char __iomem *vport, int cmd)
+{
+ unsigned char val;
+ int loop = 500000;
+
+ do {
+ val = ioread8(vport + DSP_STATUS);
+ /*
+ * DSP ready to receive data if bit 7 of val == 0
+ */
+ if (!(val & 0x80)) {
+ iowrite8(cmd, vport + DSP_COMMAND);
+ return 0;
+ }
+ cpu_relax();
+ } while (loop--);
+
+ snd_printk(KERN_ERR "DSP Command (0x%x) timeout.\n", cmd);
+
+ return -EIO;
+}
+
+static int __devinit sc6000_dsp_get_answer(char __iomem *vport, int command,
+ char *data, int data_len)
+{
+ int len = 0;
+
+ if (sc6000_write(vport, command)) {
+ snd_printk(KERN_ERR "CMD 0x%x: failed!\n", command);
+ return -EIO;
+ }
+
+ do {
+ int val = sc6000_read(vport);
+
+ if (val < 0)
+ break;
+
+ data[len++] = val;
+
+ } while (len < data_len);
+
+ /*
+ * If no more data available, return to the caller, no error if len>0.
+ * We have no other way to know when the string is finished.
+ */
+ return len ? len : -EIO;
+}
+
+static int __devinit sc6000_dsp_reset(char __iomem *vport)
+{
+ iowrite8(1, vport + DSP_RESET);
+ udelay(10);
+ iowrite8(0, vport + DSP_RESET);
+ udelay(20);
+ if (sc6000_read(vport) == 0xaa)
+ return 0;
+ return -ENODEV;
+}
+
+/* detection and initialization */
+static int __devinit sc6000_cfg_write(char __iomem *vport,
+ unsigned char softcfg)
+{
+
+ if (sc6000_write(vport, WRITE_MDIRQ_CFG)) {
+ snd_printk(KERN_ERR "CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
+ return -EIO;
+ }
+ if (sc6000_write(vport, softcfg)) {
+ snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static int __devinit sc6000_setup_board(char __iomem *vport, int config)
+{
+ int loop = 10;
+
+ do {
+ if (sc6000_write(vport, COMMAND_88)) {
+ snd_printk(KERN_ERR "CMD 0x%x: failed!\n",
+ COMMAND_88);
+ return -EIO;
+ }
+ } while ((sc6000_wait_data(vport) < 0) && loop--);
+
+ if (sc6000_read(vport) < 0) {
+ snd_printk(KERN_ERR "sc6000_read after CMD 0x%x: failed\n",
+ COMMAND_88);
+ return -EIO;
+ }
+
+ if (sc6000_cfg_write(vport, config))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int __devinit sc6000_init_mss(char __iomem *vport, int config,
+ char __iomem *vmss_port, int mss_config)
+{
+ if (sc6000_write(vport, DSP_INIT_MSS)) {
+ snd_printk(KERN_ERR "sc6000_init_mss [0x%x]: failed!\n",
+ DSP_INIT_MSS);
+ return -EIO;
+ }
+
+ msleep(10);
+
+ if (sc6000_cfg_write(vport, config))
+ return -EIO;
+
+ iowrite8(mss_config, vmss_port);
+
+ return 0;
+}
+
+static int __devinit sc6000_init_board(char __iomem *vport, int irq, int dma,
+ char __iomem *vmss_port, int mpu_irq)
+{
+ char answer[15];
+ char version[2];
+ int mss_config = sc6000_irq_to_softcfg(irq) |
+ sc6000_dma_to_softcfg(dma);
+ int config = mss_config |
+ sc6000_mpu_irq_to_softcfg(mpu_irq);
+ int err;
+
+ err = sc6000_dsp_reset(vport);
+ if (err < 0) {
+ snd_printk(KERN_ERR "sc6000_dsp_reset: failed!\n");
+ return err;
+ }
+
+ err = sc6000_dsp_get_answer(vport, GET_DSP_COPYRIGHT, answer, 15);
+ if (err <= 0) {
+ snd_printk(KERN_ERR "sc6000_dsp_copyright: failed!\n");
+ return -ENODEV;
+ }
+ /*
+ * My SC-6000 card return "SC-6000" in DSPCopyright, so
+ * if we have something different, we have to be warned.
+ * Mine returns "SC-6000A " - KH
+ */
+ if (strncmp("SC-6000", answer, 7))
+ snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n");
+
+ if (sc6000_dsp_get_answer(vport, GET_DSP_VERSION, version, 2) < 2) {
+ snd_printk(KERN_ERR "sc6000_dsp_version: failed!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n",
+ answer, version[0], version[1]);
+
+ /*
+ * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
+ */
+ err = sc6000_cfg_write(vport, 0x0a);
+ if (err < 0) {
+ snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
+ return -EFAULT;
+ }
+
+ err = sc6000_setup_board(vport, config);
+ if (err < 0) {
+ snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
+ return -ENODEV;
+ }
+
+ err = sc6000_init_mss(vport, config, vmss_port, mss_config);
+ if (err < 0) {
+ snd_printk(KERN_ERR "Can not initialize"
+ "Microsoft Sound System mode.\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int __devinit snd_sc6000_mixer(struct snd_ad1848 *chip)
+{
+ struct snd_card *card = chip->card;
+ struct snd_ctl_elem_id id1, id2;
+ int err;
+
+ memset(&id1, 0, sizeof(id1));
+ memset(&id2, 0, sizeof(id2));
+ id1.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ /* reassign AUX0 to FM */
+ strcpy(id1.name, "Aux Playback Switch");
+ strcpy(id2.name, "FM Playback Switch");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ strcpy(id1.name, "Aux Playback Volume");
+ strcpy(id2.name, "FM Playback Volume");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ /* reassign AUX1 to CD */
+ strcpy(id1.name, "Aux Playback Switch"); id1.index = 1;
+ strcpy(id2.name, "CD Playback Switch");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ strcpy(id1.name, "Aux Playback Volume");
+ strcpy(id2.name, "CD Playback Volume");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int __devinit snd_sc6000_match(struct device *devptr, unsigned int dev)
+{
+ if (!enable[dev])
+ return 0;
+ if (port[dev] == SNDRV_AUTO_PORT) {
+ printk(KERN_ERR PFX "specify IO port\n");
+ return 0;
+ }
+ if (mss_port[dev] == SNDRV_AUTO_PORT) {
+ printk(KERN_ERR PFX "specify MSS port\n");
+ return 0;
+ }
+ if (port[dev] != 0x220 && port[dev] != 0x240) {
+ printk(KERN_ERR PFX "Port must be 0x220 or 0x240\n");
+ return 0;
+ }
+ if (mss_port[dev] != 0x530 && mss_port[dev] != 0xe80) {
+ printk(KERN_ERR PFX "MSS port must be 0x530 or 0xe80\n");
+ return 0;
+ }
+ if (irq[dev] != SNDRV_AUTO_IRQ && !sc6000_irq_to_softcfg(irq[dev])) {
+ printk(KERN_ERR PFX "invalid IRQ %d\n", irq[dev]);
+ return 0;
+ }
+ if (dma[dev] != SNDRV_AUTO_DMA && !sc6000_dma_to_softcfg(dma[dev])) {
+ printk(KERN_ERR PFX "invalid DMA %d\n", dma[dev]);
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ (mpu_port[dev] & ~0x30L) != 0x300) {
+ printk(KERN_ERR PFX "invalid MPU-401 port %lx\n",
+ mpu_port[dev]);
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ mpu_irq[dev] != SNDRV_AUTO_IRQ && mpu_irq[dev] != 0 &&
+ !sc6000_mpu_irq_to_softcfg(mpu_irq[dev])) {
+ printk(KERN_ERR PFX "invalid MPU-401 IRQ %d\n", mpu_irq[dev]);
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
+{
+ static int possible_irqs[] = { 5, 7, 9, 10, 11, -1 };
+ static int possible_dmas[] = { 1, 3, 0, -1 };
+ int err;
+ int xirq = irq[dev];
+ int xdma = dma[dev];
+ struct snd_card *card;
+ struct snd_ad1848 *chip;
+ struct snd_opl3 *opl3;
+ char __iomem *vport;
+ char __iomem *vmss_port;
+
+
+ card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+ if (!card)
+ return -ENOMEM;
+
+ if (xirq == SNDRV_AUTO_IRQ) {
+ xirq = snd_legacy_find_free_irq(possible_irqs);
+ if (xirq < 0) {
+ snd_printk(KERN_ERR PFX "unable to find a free IRQ\n");
+ err = -EBUSY;
+ goto err_exit;
+ }
+ }
+
+ if (xdma == SNDRV_AUTO_DMA) {
+ xdma = snd_legacy_find_free_dma(possible_dmas);
+ if (xdma < 0) {
+ snd_printk(KERN_ERR PFX "unable to find a free DMA\n");
+ err = -EBUSY;
+ goto err_exit;
+ }
+ }
+
+ if (!request_region(port[dev], 0x10, DRV_NAME)) {
+ snd_printk(KERN_ERR PFX
+ "I/O port region is already in use.\n");
+ err = -EBUSY;
+ goto err_exit;
+ }
+ vport = devm_ioport_map(devptr, port[dev], 0x10);
+ if (!vport) {
+ snd_printk(KERN_ERR PFX
+ "I/O port cannot be iomaped.\n");
+ err = -EBUSY;
+ goto err_unmap1;
+ }
+
+ /* to make it marked as used */
+ if (!request_region(mss_port[dev], 4, DRV_NAME)) {
+ snd_printk(KERN_ERR PFX
+ "SC-6000 port I/O port region is already in use.\n");
+ err = -EBUSY;
+ goto err_unmap2;
+ }
+ vmss_port = devm_ioport_map(devptr, mss_port[dev], 4);
+ if (!vport) {
+ snd_printk(KERN_ERR PFX
+ "MSS port I/O cannot be iomaped.\n");
+ err = -EBUSY;
+ goto err_unmap2;
+ }
+
+ snd_printd("Initializing BASE[0x%lx] IRQ[%d] DMA[%d] MIRQ[%d]\n",
+ port[dev], xirq, xdma,
+ mpu_irq[dev] == SNDRV_AUTO_IRQ ? 0 : mpu_irq[dev]);
+
+ err = sc6000_init_board(vport, xirq, xdma, vmss_port, mpu_irq[dev]);
+ if (err < 0)
+ goto err_unmap2;
+
+ err = snd_ad1848_create(card, mss_port[dev] + 4, xirq, xdma,
+ AD1848_HW_DETECT, &chip);
+ if (err < 0)
+ goto err_unmap2;
+ card->private_data = chip;
+
+ err = snd_ad1848_pcm(chip, 0, NULL);
+ if (err < 0) {
+ snd_printk(KERN_ERR PFX
+ "error creating new ad1848 PCM device\n");
+ goto err_unmap2;
+ }
+ err = snd_ad1848_mixer(chip);
+ if (err < 0) {
+ snd_printk(KERN_ERR PFX "error creating new ad1848 mixer\n");
+ goto err_unmap2;
+ }
+ err = snd_sc6000_mixer(chip);
+ if (err < 0) {
+ snd_printk(KERN_ERR PFX "the mixer rewrite failed\n");
+ goto err_unmap2;
+ }
+ if (snd_opl3_create(card,
+ 0x388, 0x388 + 2,
+ OPL3_HW_AUTO, 0, &opl3) < 0) {
+ snd_printk(KERN_ERR PFX "no OPL device at 0x%x-0x%x ?\n",
+ 0x388, 0x388 + 2);
+ } else {
+ err = snd_opl3_timer_new(opl3, 0, 1);
+ if (err < 0)
+ goto err_unmap2;
+
+ err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (err < 0)
+ goto err_unmap2;
+ }
+
+ if (mpu_port[dev] != SNDRV_AUTO_PORT) {
+ if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
+ mpu_irq[dev] = -1;
+ if (snd_mpu401_uart_new(card, 0,
+ MPU401_HW_MPU401,
+ mpu_port[dev], 0,
+ mpu_irq[dev], IRQF_DISABLED,
+ NULL) < 0)
+ snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
+ mpu_port[dev]);
+ }
+
+ strcpy(card->driver, DRV_NAME);
+ strcpy(card->shortname, "SC-6000");
+ sprintf(card->longname, "Gallant SC-6000 at 0x%lx, irq %d, dma %d",
+ mss_port[dev], xirq, xdma);
+
+ snd_card_set_dev(card, devptr);
+
+ err = snd_card_register(card);
+ if (err < 0)
+ goto err_unmap2;
+
+ dev_set_drvdata(devptr, card);
+ return 0;
+
+err_unmap2:
+ release_region(mss_port[dev], 4);
+err_unmap1:
+ release_region(port[dev], 0x10);
+err_exit:
+ snd_card_free(card);
+ return err;
+}
+
+static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
+{
+ release_region(port[dev], 0x10);
+ release_region(mss_port[dev], 4);
+
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
+ return 0;
+}
+
+static struct isa_driver snd_sc6000_driver = {
+ .match = snd_sc6000_match,
+ .probe = snd_sc6000_probe,
+ .remove = __devexit_p(snd_sc6000_remove),
+ /* FIXME: suspend/resume */
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+
+static int __init alsa_card_sc6000_init(void)
+{
+ return isa_register_driver(&snd_sc6000_driver, SNDRV_CARDS);
+}
+
+static void __exit alsa_card_sc6000_exit(void)
+{
+ isa_unregister_driver(&snd_sc6000_driver);
+}
+
+module_init(alsa_card_sc6000_init)
+module_exit(alsa_card_sc6000_exit)