diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
index 485900f..abc266e 100644
--- a/drivers/input/keyboard/tm2-touchkey.c
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -213,7 +213,7 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	/* led device */
 	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
 	touchkey->led_dev.brightness = LED_FULL;
-	touchkey->led_dev.max_brightness = LED_FULL;
+	touchkey->led_dev.max_brightness = LED_ON;
 	touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
 
 	error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
index d3e9ce2..38c79eb 100644
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -259,6 +259,42 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek,
+					     struct platform_device *pdev)
+{
+	unsigned long long hrv = 0;
+	acpi_status status;
+
+	if (IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY) &&
+	    axp20x_pek->axp20x->variant == AXP288_ID) {
+		status = acpi_evaluate_integer(ACPI_HANDLE(pdev->dev.parent),
+					       "_HRV", NULL, &hrv);
+		if (ACPI_FAILURE(status))
+			dev_err(&pdev->dev, "Failed to get PMIC hardware revision\n");
+
+		/*
+		 * On Cherry Trail platforms (hrv == 3), do not register the
+		 * input device if there is an "INTCFD9" or "ACPI0011" gpio
+		 * button ACPI device, as that handles the power button too,
+		 * and otherwise we end up reporting all presses twice.
+		 */
+		if (hrv == 3 && (acpi_dev_present("INTCFD9", NULL, -1) ||
+				 acpi_dev_present("ACPI0011", NULL, -1)))
+			return false;
+
+	}
+
+	return true;
+}
+#else
+static bool axp20x_pek_should_register_input(struct axp20x_pek *axp20x_pek,
+					     struct platform_device *pdev)
+{
+	return true;
+}
+#endif
+
 static int axp20x_pek_probe(struct platform_device *pdev)
 {
 	struct axp20x_pek *axp20x_pek;
@@ -271,13 +307,7 @@ static int axp20x_pek_probe(struct platform_device *pdev)
 
 	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
 
-	/*
-	 * Do not register the input device if there is an "INTCFD9"
-	 * gpio button ACPI device, that handles the power button too,
-	 * and otherwise we end up reporting all presses twice.
-	 */
-	if (!acpi_dev_found("INTCFD9") ||
-	    !IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY)) {
+	if (axp20x_pek_should_register_input(axp20x_pek, pdev)) {
 		error = axp20x_pek_probe_input_device(axp20x_pek, pdev);
 		if (error)
 			return error;
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index e37d372..f600f3a 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -248,7 +248,8 @@ static struct soc_button_info *soc_button_get_button_info(struct device *dev)
 
 	if (!btns_desc) {
 		dev_err(dev, "ACPI Button Descriptors not found\n");
-		return ERR_PTR(-ENODEV);
+		button_info = ERR_PTR(-ENODEV);
+		goto out;
 	}
 
 	/* The first package describes the collection */
@@ -264,24 +265,31 @@ static struct soc_button_info *soc_button_get_button_info(struct device *dev)
 	}
 	if (collection_uid == -1) {
 		dev_err(dev, "Invalid Button Collection Descriptor\n");
-		return ERR_PTR(-ENODEV);
+		button_info = ERR_PTR(-ENODEV);
+		goto out;
 	}
 
 	/* There are package.count - 1 buttons + 1 terminating empty entry */
 	button_info = devm_kcalloc(dev, btns_desc->package.count,
 				   sizeof(*button_info), GFP_KERNEL);
-	if (!button_info)
-		return ERR_PTR(-ENOMEM);
+	if (!button_info) {
+		button_info = ERR_PTR(-ENOMEM);
+		goto out;
+	}
 
 	/* Parse the button descriptors */
 	for (i = 1, btn = 0; i < btns_desc->package.count; i++, btn++) {
 		if (soc_button_parse_btn_desc(dev,
 					      &btns_desc->package.elements[i],
 					      collection_uid,
-					      &button_info[btn]))
-			return ERR_PTR(-ENODEV);
+					      &button_info[btn])) {
+			button_info = ERR_PTR(-ENODEV);
+			goto out;
+		}
 	}
 
+out:
+	kfree(buf.pointer);
 	return button_info;
 }
 
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index e8cc223..7919932 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1118,8 +1118,10 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
  * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
  * Avatar AVIU-145A2       0x361f00        ?               clickpad
  * Fujitsu LIFEBOOK E544   0x470f00        d0, 12, 09      2 hw buttons
+ * Fujitsu LIFEBOOK E546   0x470f00        50, 12, 09      2 hw buttons
  * Fujitsu LIFEBOOK E547   0x470f00        50, 12, 09      2 hw buttons
  * Fujitsu LIFEBOOK E554   0x570f01        40, 14, 0c      2 hw buttons
+ * Fujitsu LIFEBOOK E557   0x570f01        40, 14, 0c      2 hw buttons
  * Fujitsu T725            0x470f01        05, 12, 09      2 hw buttons
  * Fujitsu H730            0x570f00        c0, 14, 0c      3 hw buttons (**)
  * Gigabyte U2442          0x450f01        58, 17, 0c      2 hw buttons
@@ -1525,6 +1527,13 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
 		},
 	},
 	{
+		/* Fujitsu LIFEBOOK E546  does not work with crc_enabled == 0 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"),
+		},
+	},
+	{
 		/* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -1546,6 +1555,13 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
 		},
 	},
 	{
+		/* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"),
+		},
+	},
+	{
 		/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 131df9d..16c3046 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -176,6 +176,12 @@ static const char * const smbus_pnp_ids[] = {
 	NULL
 };
 
+static const char * const forcepad_pnp_ids[] = {
+	"SYN300D",
+	"SYN3014",
+	NULL
+};
+
 /*
  * Send a command to the synpatics touchpad by special commands
  */
@@ -397,6 +403,8 @@ static int synaptics_query_hardware(struct psmouse *psmouse,
 {
 	int error;
 
+	memset(info, 0, sizeof(*info));
+
 	error = synaptics_identify(psmouse, info);
 	if (error)
 		return error;
@@ -480,13 +488,6 @@ static const struct min_max_quirk min_max_pnpid_table[] = {
 	{ }
 };
 
-/* This list has been kindly provided by Synaptics. */
-static const char * const forcepad_pnp_ids[] = {
-	"SYN300D",
-	"SYN3014",
-	NULL
-};
-
 /*****************************************************************************
  *	Synaptics communications functions
  ****************************************************************************/
@@ -1687,7 +1688,8 @@ enum {
 	SYNAPTICS_INTERTOUCH_ON,
 };
 
-static int synaptics_intertouch = SYNAPTICS_INTERTOUCH_NOT_SET;
+static int synaptics_intertouch = IS_ENABLED(CONFIG_RMI4_SMB) ?
+		SYNAPTICS_INTERTOUCH_NOT_SET : SYNAPTICS_INTERTOUCH_OFF;
 module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644);
 MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device.");
 
@@ -1737,8 +1739,16 @@ static int synaptics_setup_intertouch(struct psmouse *psmouse,
 
 	if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) {
 		if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) &&
-		    !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids))
+		    !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) {
+
+			if (!psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids))
+				psmouse_info(psmouse,
+					     "Your touchpad (%s) says it can support a different bus. "
+					     "If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.\n",
+					     psmouse->ps2dev.serio->firmware_id);
+
 			return -ENXIO;
+		}
 	}
 
 	psmouse_info(psmouse, "Trying to set up SMBus access\n");
@@ -1810,6 +1820,15 @@ int synaptics_init(struct psmouse *psmouse)
 	}
 
 	if (SYN_CAP_INTERTOUCH(info.ext_cap_0c)) {
+		if ((!IS_ENABLED(CONFIG_RMI4_SMB) ||
+		     !IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) &&
+		    /* Forcepads need F21, which is not ready */
+		    !psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids)) {
+			psmouse_warn(psmouse,
+				     "The touchpad can support a better bus than the too old PS/2 protocol. "
+				     "Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.\n");
+		}
+
 		error = synaptics_setup_intertouch(psmouse, &info, true);
 		if (!error)
 			return PSMOUSE_SYNAPTICS_SMBUS;
diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
index 77dad04..ad71a5e 100644
--- a/drivers/input/rmi4/rmi_f03.c
+++ b/drivers/input/rmi4/rmi_f03.c
@@ -146,7 +146,7 @@ static int rmi_f03_register_pt(struct f03_data *f03)
 	if (!serio)
 		return -ENOMEM;
 
-	serio->id.type = SERIO_8042;
+	serio->id.type = SERIO_PS_PSTHRU;
 	serio->write = rmi_f03_pt_write;
 	serio->port_data = f03;
 
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
index dea63e2..f5206e2 100644
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -31,9 +31,6 @@
 #define F54_GET_REPORT          1
 #define F54_FORCE_CAL           2
 
-/* Fixed sizes of reports */
-#define F54_QUERY_LEN			27
-
 /* F54 capabilities */
 #define F54_CAP_BASELINE	(1 << 2)
 #define F54_CAP_IMAGE8		(1 << 3)
@@ -95,7 +92,6 @@ struct rmi_f54_reports {
 struct f54_data {
 	struct rmi_function *fn;
 
-	u8 qry[F54_QUERY_LEN];
 	u8 num_rx_electrodes;
 	u8 num_tx_electrodes;
 	u8 capabilities;
@@ -632,22 +628,23 @@ static int rmi_f54_detect(struct rmi_function *fn)
 {
 	int error;
 	struct f54_data *f54;
+	u8 buf[6];
 
 	f54 = dev_get_drvdata(&fn->dev);
 
 	error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
-			       &f54->qry, sizeof(f54->qry));
+			       buf, sizeof(buf));
 	if (error) {
 		dev_err(&fn->dev, "%s: Failed to query F54 properties\n",
 			__func__);
 		return error;
 	}
 
-	f54->num_rx_electrodes = f54->qry[0];
-	f54->num_tx_electrodes = f54->qry[1];
-	f54->capabilities = f54->qry[2];
-	f54->clock_rate = f54->qry[3] | (f54->qry[4] << 8);
-	f54->family = f54->qry[5];
+	f54->num_rx_electrodes = buf[0];
+	f54->num_tx_electrodes = buf[1];
+	f54->capabilities = buf[2];
+	f54->clock_rate = buf[3] | (buf[4] << 8);
+	f54->family = buf[5];
 
 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 num_rx_electrodes: %d\n",
 		f54->num_rx_electrodes);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 09720d9..f932a83 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -723,6 +723,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
 		},
 	},
+	{
+		/* Fujitsu UH554 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 813dd68..0dbcf10 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -526,6 +526,7 @@ static int __maybe_unused silead_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 
+	disable_irq(client->irq);
 	silead_ts_set_power(client, SILEAD_POWER_OFF);
 	return 0;
 }
@@ -551,6 +552,8 @@ static int __maybe_unused silead_ts_resume(struct device *dev)
 		return -ENODEV;
 	}
 
+	enable_irq(client->irq);
+
 	return 0;
 }