| /* |
| |
| Broadcom B43 wireless driver |
| IEEE 802.11a PHY driver |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> |
| Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> |
| Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> |
| Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include <linux/slab.h> |
| |
| #include "b43.h" |
| #include "phy_a.h" |
| #include "phy_common.h" |
| #include "wa.h" |
| #include "tables.h" |
| #include "main.h" |
| |
| |
| /* Get the freq, as it has to be written to the device. */ |
| static inline u16 channel2freq_a(u8 channel) |
| { |
| B43_WARN_ON(channel > 200); |
| |
| return (5000 + 5 * channel); |
| } |
| |
| static inline u16 freq_r3A_value(u16 frequency) |
| { |
| u16 value; |
| |
| if (frequency < 5091) |
| value = 0x0040; |
| else if (frequency < 5321) |
| value = 0x0000; |
| else if (frequency < 5806) |
| value = 0x0080; |
| else |
| value = 0x0040; |
| |
| return value; |
| } |
| |
| #if 0 |
| /* This function converts a TSSI value to dBm in Q5.2 */ |
| static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_a *aphy = phy->a; |
| s8 dbm = 0; |
| s32 tmp; |
| |
| tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi); |
| tmp += 0x80; |
| tmp = clamp_val(tmp, 0x00, 0xFF); |
| dbm = aphy->tssi2dbm[tmp]; |
| //TODO: There's a FIXME on the specs |
| |
| return dbm; |
| } |
| #endif |
| |
| static void b43_radio_set_tx_iq(struct b43_wldev *dev) |
| { |
| static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; |
| static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; |
| u16 tmp = b43_radio_read16(dev, 0x001E); |
| int i, j; |
| |
| for (i = 0; i < 5; i++) { |
| for (j = 0; j < 5; j++) { |
| if (tmp == (data_high[i] << 4 | data_low[j])) { |
| b43_phy_write(dev, 0x0069, |
| (i - j) << 8 | 0x00C0); |
| return; |
| } |
| } |
| } |
| } |
| |
| static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel) |
| { |
| u16 freq, r8, tmp; |
| |
| freq = channel2freq_a(channel); |
| |
| r8 = b43_radio_read16(dev, 0x0008); |
| b43_write16(dev, 0x03F0, freq); |
| b43_radio_write16(dev, 0x0008, r8); |
| |
| //TODO: write max channel TX power? to Radio 0x2D |
| tmp = b43_radio_read16(dev, 0x002E); |
| tmp &= 0x0080; |
| //TODO: OR tmp with the Power out estimation for this channel? |
| b43_radio_write16(dev, 0x002E, tmp); |
| |
| if (freq >= 4920 && freq <= 5500) { |
| /* |
| * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; |
| * = (freq * 0.025862069 |
| */ |
| r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ |
| } |
| b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); |
| b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); |
| b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); |
| b43_radio_maskset(dev, 0x0022, 0x000F, (r8 << 4)); |
| b43_radio_write16(dev, 0x002A, (r8 << 4)); |
| b43_radio_write16(dev, 0x002B, (r8 << 4)); |
| b43_radio_maskset(dev, 0x0008, 0x00F0, (r8 << 4)); |
| b43_radio_maskset(dev, 0x0029, 0xFF0F, 0x00B0); |
| b43_radio_write16(dev, 0x0035, 0x00AA); |
| b43_radio_write16(dev, 0x0036, 0x0085); |
| b43_radio_maskset(dev, 0x003A, 0xFF20, freq_r3A_value(freq)); |
| b43_radio_mask(dev, 0x003D, 0x00FF); |
| b43_radio_maskset(dev, 0x0081, 0xFF7F, 0x0080); |
| b43_radio_mask(dev, 0x0035, 0xFFEF); |
| b43_radio_maskset(dev, 0x0035, 0xFFEF, 0x0010); |
| b43_radio_set_tx_iq(dev); |
| //TODO: TSSI2dbm workaround |
| //FIXME b43_phy_xmitpower(dev); |
| } |
| |
| static void b43_radio_init2060(struct b43_wldev *dev) |
| { |
| b43_radio_write16(dev, 0x0004, 0x00C0); |
| b43_radio_write16(dev, 0x0005, 0x0008); |
| b43_radio_write16(dev, 0x0009, 0x0040); |
| b43_radio_write16(dev, 0x0005, 0x00AA); |
| b43_radio_write16(dev, 0x0032, 0x008F); |
| b43_radio_write16(dev, 0x0006, 0x008F); |
| b43_radio_write16(dev, 0x0034, 0x008F); |
| b43_radio_write16(dev, 0x002C, 0x0007); |
| b43_radio_write16(dev, 0x0082, 0x0080); |
| b43_radio_write16(dev, 0x0080, 0x0000); |
| b43_radio_write16(dev, 0x003F, 0x00DA); |
| b43_radio_mask(dev, 0x0005, ~0x0008); |
| b43_radio_mask(dev, 0x0081, ~0x0010); |
| b43_radio_mask(dev, 0x0081, ~0x0020); |
| b43_radio_mask(dev, 0x0081, ~0x0020); |
| msleep(1); /* delay 400usec */ |
| |
| b43_radio_maskset(dev, 0x0081, ~0x0020, 0x0010); |
| msleep(1); /* delay 400usec */ |
| |
| b43_radio_maskset(dev, 0x0005, ~0x0008, 0x0008); |
| b43_radio_mask(dev, 0x0085, ~0x0010); |
| b43_radio_mask(dev, 0x0005, ~0x0008); |
| b43_radio_mask(dev, 0x0081, ~0x0040); |
| b43_radio_maskset(dev, 0x0081, ~0x0040, 0x0040); |
| b43_radio_write16(dev, 0x0005, |
| (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); |
| b43_phy_write(dev, 0x0063, 0xDDC6); |
| b43_phy_write(dev, 0x0069, 0x07BE); |
| b43_phy_write(dev, 0x006A, 0x0000); |
| |
| aphy_channel_switch(dev, dev->phy.ops->get_default_chan(dev)); |
| |
| msleep(1); |
| } |
| |
| static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) |
| { |
| int i; |
| |
| if (dev->phy.rev < 3) { |
| if (enable) |
| for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { |
| b43_ofdmtab_write16(dev, |
| B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); |
| b43_ofdmtab_write16(dev, |
| B43_OFDMTAB_WRSSI, i, 0xFFF8); |
| } |
| else |
| for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { |
| b43_ofdmtab_write16(dev, |
| B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); |
| b43_ofdmtab_write16(dev, |
| B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); |
| } |
| } else { |
| if (enable) |
| for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) |
| b43_ofdmtab_write16(dev, |
| B43_OFDMTAB_WRSSI, i, 0x0820); |
| else |
| for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) |
| b43_ofdmtab_write16(dev, |
| B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); |
| } |
| } |
| |
| static void b43_phy_ww(struct b43_wldev *dev) |
| { |
| u16 b, curr_s, best_s = 0xFFFF; |
| int i; |
| |
| b43_phy_mask(dev, B43_PHY_CRS0, ~B43_PHY_CRS0_EN); |
| b43_phy_set(dev, B43_PHY_OFDM(0x1B), 0x1000); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x82), 0xF0FF, 0x0300); |
| b43_radio_set(dev, 0x0009, 0x0080); |
| b43_radio_maskset(dev, 0x0012, 0xFFFC, 0x0002); |
| b43_wa_initgains(dev); |
| b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); |
| b = b43_phy_read(dev, B43_PHY_PWRDOWN); |
| b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); |
| b43_radio_set(dev, 0x0004, 0x0004); |
| for (i = 0x10; i <= 0x20; i++) { |
| b43_radio_write16(dev, 0x0013, i); |
| curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; |
| if (!curr_s) { |
| best_s = 0x0000; |
| break; |
| } else if (curr_s >= 0x0080) |
| curr_s = 0x0100 - curr_s; |
| if (curr_s < best_s) |
| best_s = curr_s; |
| } |
| b43_phy_write(dev, B43_PHY_PWRDOWN, b); |
| b43_radio_mask(dev, 0x0004, 0xFFFB); |
| b43_radio_write16(dev, 0x0013, best_s); |
| b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); |
| b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); |
| b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); |
| b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); |
| b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); |
| b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0xBB), 0xF000, 0x0053); |
| b43_phy_maskset(dev, B43_PHY_OFDM61, 0xFE1F, 0x0120); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x13), 0x0FFF, 0x3000); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x14), 0x0FFF, 0x3000); |
| b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); |
| for (i = 0; i < 6; i++) |
| b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); |
| b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); |
| b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); |
| b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); |
| b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); |
| b43_phy_set(dev, B43_PHY_CRS0, B43_PHY_CRS0_EN); |
| } |
| |
| static void hardware_pctl_init_aphy(struct b43_wldev *dev) |
| { |
| //TODO |
| } |
| |
| void b43_phy_inita(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| /* This lowlevel A-PHY init is also called from G-PHY init. |
| * So we must not access phy->a, if called from G-PHY code. |
| */ |
| B43_WARN_ON((phy->type != B43_PHYTYPE_A) && |
| (phy->type != B43_PHYTYPE_G)); |
| |
| might_sleep(); |
| |
| if (phy->rev >= 6) { |
| if (phy->type == B43_PHYTYPE_A) |
| b43_phy_mask(dev, B43_PHY_OFDM(0x1B), ~0x1000); |
| if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) |
| b43_phy_set(dev, B43_PHY_ENCORE, 0x0010); |
| else |
| b43_phy_mask(dev, B43_PHY_ENCORE, ~0x1010); |
| } |
| |
| b43_wa_all(dev); |
| |
| if (phy->type == B43_PHYTYPE_A) { |
| if (phy->gmode && (phy->rev < 3)) |
| b43_phy_set(dev, 0x0034, 0x0001); |
| b43_phy_rssiagc(dev, 0); |
| |
| b43_phy_set(dev, B43_PHY_CRS0, B43_PHY_CRS0_EN); |
| |
| b43_radio_init2060(dev); |
| |
| if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && |
| ((dev->dev->board_type == SSB_BOARD_BU4306) || |
| (dev->dev->board_type == SSB_BOARD_BU4309))) { |
| ; //TODO: A PHY LO |
| } |
| |
| if (phy->rev >= 3) |
| b43_phy_ww(dev); |
| |
| hardware_pctl_init_aphy(dev); |
| |
| //TODO: radar detection |
| } |
| |
| if ((phy->type == B43_PHYTYPE_G) && |
| (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)) { |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x6E), 0xE000, 0x3CF); |
| } |
| } |
| |
| /* Initialise the TSSI->dBm lookup table */ |
| static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_a *aphy = phy->a; |
| s16 pab0, pab1, pab2; |
| |
| pab0 = (s16) (dev->dev->bus_sprom->pa1b0); |
| pab1 = (s16) (dev->dev->bus_sprom->pa1b1); |
| pab2 = (s16) (dev->dev->bus_sprom->pa1b2); |
| |
| if (pab0 != 0 && pab1 != 0 && pab2 != 0 && |
| pab0 != -1 && pab1 != -1 && pab2 != -1) { |
| /* The pabX values are set in SPROM. Use them. */ |
| if ((s8) dev->dev->bus_sprom->itssi_a != 0 && |
| (s8) dev->dev->bus_sprom->itssi_a != -1) |
| aphy->tgt_idle_tssi = |
| (s8) (dev->dev->bus_sprom->itssi_a); |
| else |
| aphy->tgt_idle_tssi = 62; |
| aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, |
| pab1, pab2); |
| if (!aphy->tssi2dbm) |
| return -ENOMEM; |
| } else { |
| /* pabX values not set in SPROM, |
| * but APHY needs a generated table. */ |
| aphy->tssi2dbm = NULL; |
| b43err(dev->wl, "Could not generate tssi2dBm " |
| "table (wrong SPROM info)!\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int b43_aphy_op_allocate(struct b43_wldev *dev) |
| { |
| struct b43_phy_a *aphy; |
| int err; |
| |
| aphy = kzalloc(sizeof(*aphy), GFP_KERNEL); |
| if (!aphy) |
| return -ENOMEM; |
| dev->phy.a = aphy; |
| |
| err = b43_aphy_init_tssi2dbm_table(dev); |
| if (err) |
| goto err_free_aphy; |
| |
| return 0; |
| |
| err_free_aphy: |
| kfree(aphy); |
| dev->phy.a = NULL; |
| |
| return err; |
| } |
| |
| static void b43_aphy_op_prepare_structs(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_a *aphy = phy->a; |
| const void *tssi2dbm; |
| int tgt_idle_tssi; |
| |
| /* tssi2dbm table is constant, so it is initialized at alloc time. |
| * Save a copy of the pointer. */ |
| tssi2dbm = aphy->tssi2dbm; |
| tgt_idle_tssi = aphy->tgt_idle_tssi; |
| |
| /* Zero out the whole PHY structure. */ |
| memset(aphy, 0, sizeof(*aphy)); |
| |
| aphy->tssi2dbm = tssi2dbm; |
| aphy->tgt_idle_tssi = tgt_idle_tssi; |
| |
| //TODO init struct b43_phy_a |
| |
| } |
| |
| static void b43_aphy_op_free(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_a *aphy = phy->a; |
| |
| kfree(aphy->tssi2dbm); |
| aphy->tssi2dbm = NULL; |
| |
| kfree(aphy); |
| dev->phy.a = NULL; |
| } |
| |
| static int b43_aphy_op_init(struct b43_wldev *dev) |
| { |
| b43_phy_inita(dev); |
| |
| return 0; |
| } |
| |
| static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset) |
| { |
| /* OFDM registers are base-registers for the A-PHY. */ |
| if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { |
| offset &= ~B43_PHYROUTE; |
| offset |= B43_PHYROUTE_BASE; |
| } |
| |
| #if B43_DEBUG |
| if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { |
| /* Ext-G registers are only available on G-PHYs */ |
| b43err(dev->wl, "Invalid EXT-G PHY access at " |
| "0x%04X on A-PHY\n", offset); |
| dump_stack(); |
| } |
| if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { |
| /* N-BMODE registers are only available on N-PHYs */ |
| b43err(dev->wl, "Invalid N-BMODE PHY access at " |
| "0x%04X on A-PHY\n", offset); |
| dump_stack(); |
| } |
| #endif /* B43_DEBUG */ |
| |
| return offset; |
| } |
| |
| static u16 b43_aphy_op_read(struct b43_wldev *dev, u16 reg) |
| { |
| reg = adjust_phyreg(dev, reg); |
| b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); |
| return b43_read16(dev, B43_MMIO_PHY_DATA); |
| } |
| |
| static void b43_aphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) |
| { |
| reg = adjust_phyreg(dev, reg); |
| b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); |
| b43_write16(dev, B43_MMIO_PHY_DATA, value); |
| } |
| |
| static u16 b43_aphy_op_radio_read(struct b43_wldev *dev, u16 reg) |
| { |
| /* Register 1 is a 32-bit register. */ |
| B43_WARN_ON(reg == 1); |
| /* A-PHY needs 0x40 for read access */ |
| reg |= 0x40; |
| |
| b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); |
| return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); |
| } |
| |
| static void b43_aphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) |
| { |
| /* Register 1 is a 32-bit register. */ |
| B43_WARN_ON(reg == 1); |
| |
| b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); |
| b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); |
| } |
| |
| static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev) |
| { |
| return (dev->phy.rev >= 5); |
| } |
| |
| static void b43_aphy_op_software_rfkill(struct b43_wldev *dev, |
| bool blocked) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (!blocked) { |
| if (phy->radio_on) |
| return; |
| b43_radio_write16(dev, 0x0004, 0x00C0); |
| b43_radio_write16(dev, 0x0005, 0x0008); |
| b43_phy_mask(dev, 0x0010, 0xFFF7); |
| b43_phy_mask(dev, 0x0011, 0xFFF7); |
| b43_radio_init2060(dev); |
| } else { |
| b43_radio_write16(dev, 0x0004, 0x00FF); |
| b43_radio_write16(dev, 0x0005, 0x00FB); |
| b43_phy_set(dev, 0x0010, 0x0008); |
| b43_phy_set(dev, 0x0011, 0x0008); |
| } |
| } |
| |
| static int b43_aphy_op_switch_channel(struct b43_wldev *dev, |
| unsigned int new_channel) |
| { |
| if (new_channel > 200) |
| return -EINVAL; |
| aphy_channel_switch(dev, new_channel); |
| |
| return 0; |
| } |
| |
| static unsigned int b43_aphy_op_get_default_chan(struct b43_wldev *dev) |
| { |
| return 36; /* Default to channel 36 */ |
| } |
| |
| static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) |
| {//TODO |
| struct b43_phy *phy = &dev->phy; |
| u16 tmp; |
| int autodiv = 0; |
| |
| if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) |
| autodiv = 1; |
| |
| b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP); |
| |
| b43_phy_maskset(dev, B43_PHY_BBANDCFG, ~B43_PHY_BBANDCFG_RXANT, |
| (autodiv ? B43_ANTENNA_AUTO1 : antenna) << |
| B43_PHY_BBANDCFG_RXANT_SHIFT); |
| |
| if (autodiv) { |
| tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); |
| if (antenna == B43_ANTENNA_AUTO1) |
| tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; |
| else |
| tmp |= B43_PHY_ANTDWELL_AUTODIV1; |
| b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); |
| } |
| if (phy->rev < 3) |
| b43_phy_maskset(dev, B43_PHY_ANTDWELL, 0xFF00, 0x24); |
| else { |
| b43_phy_set(dev, B43_PHY_OFDM61, 0x10); |
| if (phy->rev == 3) { |
| b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, 0x1D); |
| b43_phy_write(dev, B43_PHY_ADIVRELATED, 8); |
| } else { |
| b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, 0x3A); |
| b43_phy_maskset(dev, B43_PHY_ADIVRELATED, 0xFF00, 8); |
| } |
| } |
| |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP); |
| } |
| |
| static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev) |
| {//TODO |
| } |
| |
| static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev, |
| bool ignore_tssi) |
| {//TODO |
| return B43_TXPWR_RES_DONE; |
| } |
| |
| static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev) |
| {//TODO |
| } |
| |
| static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev) |
| {//TODO |
| } |
| |
| const struct b43_phy_operations b43_phyops_a = { |
| .allocate = b43_aphy_op_allocate, |
| .free = b43_aphy_op_free, |
| .prepare_structs = b43_aphy_op_prepare_structs, |
| .init = b43_aphy_op_init, |
| .phy_read = b43_aphy_op_read, |
| .phy_write = b43_aphy_op_write, |
| .radio_read = b43_aphy_op_radio_read, |
| .radio_write = b43_aphy_op_radio_write, |
| .supports_hwpctl = b43_aphy_op_supports_hwpctl, |
| .software_rfkill = b43_aphy_op_software_rfkill, |
| .switch_analog = b43_phyop_switch_analog_generic, |
| .switch_channel = b43_aphy_op_switch_channel, |
| .get_default_chan = b43_aphy_op_get_default_chan, |
| .set_rx_antenna = b43_aphy_op_set_rx_antenna, |
| .recalc_txpower = b43_aphy_op_recalc_txpower, |
| .adjust_txpower = b43_aphy_op_adjust_txpower, |
| .pwork_15sec = b43_aphy_op_pwork_15sec, |
| .pwork_60sec = b43_aphy_op_pwork_60sec, |
| }; |