| /* |
| * drivers/cpufreq/cpufreq_ondemand.c |
| * |
| * Copyright (C) 2001 Russell King |
| * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. |
| * Jun Nakajima <jun.nakajima@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/cpufreq.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/kobject.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/percpu-defs.h> |
| #include <linux/sysfs.h> |
| #include <linux/tick.h> |
| #include <linux/types.h> |
| |
| #include "cpufreq_governor.h" |
| |
| /* On-demand governor macors */ |
| #define DEF_FREQUENCY_DOWN_DIFFERENTIAL (10) |
| #define DEF_FREQUENCY_UP_THRESHOLD (80) |
| #define DEF_SAMPLING_DOWN_FACTOR (1) |
| #define MAX_SAMPLING_DOWN_FACTOR (100000) |
| #define MICRO_FREQUENCY_DOWN_DIFFERENTIAL (3) |
| #define MICRO_FREQUENCY_UP_THRESHOLD (95) |
| #define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) |
| #define MIN_FREQUENCY_UP_THRESHOLD (11) |
| #define MAX_FREQUENCY_UP_THRESHOLD (100) |
| |
| static struct dbs_data od_dbs_data; |
| static DEFINE_PER_CPU(struct od_cpu_dbs_info_s, od_cpu_dbs_info); |
| |
| #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND |
| static struct cpufreq_governor cpufreq_gov_ondemand; |
| #endif |
| |
| static struct od_dbs_tuners od_tuners = { |
| .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, |
| .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, |
| .down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL, |
| .ignore_nice = 0, |
| .powersave_bias = 0, |
| }; |
| |
| static void ondemand_powersave_bias_init_cpu(int cpu) |
| { |
| struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu); |
| |
| dbs_info->freq_table = cpufreq_frequency_get_table(cpu); |
| dbs_info->freq_lo = 0; |
| } |
| |
| /* |
| * Not all CPUs want IO time to be accounted as busy; this depends on how |
| * efficient idling at a higher frequency/voltage is. |
| * Pavel Machek says this is not so for various generations of AMD and old |
| * Intel systems. |
| * Mike Chan (androidlcom) calis this is also not true for ARM. |
| * Because of this, whitelist specific known (series) of CPUs by default, and |
| * leave all others up to the user. |
| */ |
| static int should_io_be_busy(void) |
| { |
| #if defined(CONFIG_X86) |
| /* |
| * For Intel, Core 2 (model 15) andl later have an efficient idle. |
| */ |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && |
| boot_cpu_data.x86 == 6 && |
| boot_cpu_data.x86_model >= 15) |
| return 1; |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Find right freq to be set now with powersave_bias on. |
| * Returns the freq_hi to be used right now and will set freq_hi_jiffies, |
| * freq_lo, and freq_lo_jiffies in percpu area for averaging freqs. |
| */ |
| static unsigned int powersave_bias_target(struct cpufreq_policy *policy, |
| unsigned int freq_next, unsigned int relation) |
| { |
| unsigned int freq_req, freq_reduc, freq_avg; |
| unsigned int freq_hi, freq_lo; |
| unsigned int index = 0; |
| unsigned int jiffies_total, jiffies_hi, jiffies_lo; |
| struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, |
| policy->cpu); |
| |
| if (!dbs_info->freq_table) { |
| dbs_info->freq_lo = 0; |
| dbs_info->freq_lo_jiffies = 0; |
| return freq_next; |
| } |
| |
| cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next, |
| relation, &index); |
| freq_req = dbs_info->freq_table[index].frequency; |
| freq_reduc = freq_req * od_tuners.powersave_bias / 1000; |
| freq_avg = freq_req - freq_reduc; |
| |
| /* Find freq bounds for freq_avg in freq_table */ |
| index = 0; |
| cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg, |
| CPUFREQ_RELATION_H, &index); |
| freq_lo = dbs_info->freq_table[index].frequency; |
| index = 0; |
| cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg, |
| CPUFREQ_RELATION_L, &index); |
| freq_hi = dbs_info->freq_table[index].frequency; |
| |
| /* Find out how long we have to be in hi and lo freqs */ |
| if (freq_hi == freq_lo) { |
| dbs_info->freq_lo = 0; |
| dbs_info->freq_lo_jiffies = 0; |
| return freq_lo; |
| } |
| jiffies_total = usecs_to_jiffies(od_tuners.sampling_rate); |
| jiffies_hi = (freq_avg - freq_lo) * jiffies_total; |
| jiffies_hi += ((freq_hi - freq_lo) / 2); |
| jiffies_hi /= (freq_hi - freq_lo); |
| jiffies_lo = jiffies_total - jiffies_hi; |
| dbs_info->freq_lo = freq_lo; |
| dbs_info->freq_lo_jiffies = jiffies_lo; |
| dbs_info->freq_hi_jiffies = jiffies_hi; |
| return freq_hi; |
| } |
| |
| static void ondemand_powersave_bias_init(void) |
| { |
| int i; |
| for_each_online_cpu(i) { |
| ondemand_powersave_bias_init_cpu(i); |
| } |
| } |
| |
| static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq) |
| { |
| if (od_tuners.powersave_bias) |
| freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H); |
| else if (p->cur == p->max) |
| return; |
| |
| __cpufreq_driver_target(p, freq, od_tuners.powersave_bias ? |
| CPUFREQ_RELATION_L : CPUFREQ_RELATION_H); |
| } |
| |
| /* |
| * Every sampling_rate, we check, if current idle time is less than 20% |
| * (default), then we try to increase frequency Every sampling_rate, we look for |
| * a the lowest frequency which can sustain the load while keeping idle time |
| * over 30%. If such a frequency exist, we try to decrease to this frequency. |
| * |
| * Any frequency increase takes it to the maximum frequency. Frequency reduction |
| * happens at minimum steps of 5% (default) of current frequency |
| */ |
| static void od_check_cpu(int cpu, unsigned int load_freq) |
| { |
| struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu); |
| struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy; |
| |
| dbs_info->freq_lo = 0; |
| |
| /* Check for frequency increase */ |
| if (load_freq > od_tuners.up_threshold * policy->cur) { |
| /* If switching to max speed, apply sampling_down_factor */ |
| if (policy->cur < policy->max) |
| dbs_info->rate_mult = |
| od_tuners.sampling_down_factor; |
| dbs_freq_increase(policy, policy->max); |
| return; |
| } |
| |
| /* Check for frequency decrease */ |
| /* if we cannot reduce the frequency anymore, break out early */ |
| if (policy->cur == policy->min) |
| return; |
| |
| /* |
| * The optimal frequency is the frequency that is the lowest that can |
| * support the current CPU usage without triggering the up policy. To be |
| * safe, we focus 10 points under the threshold. |
| */ |
| if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) * |
| policy->cur) { |
| unsigned int freq_next; |
| freq_next = load_freq / (od_tuners.up_threshold - |
| od_tuners.down_differential); |
| |
| /* No longer fully busy, reset rate_mult */ |
| dbs_info->rate_mult = 1; |
| |
| if (freq_next < policy->min) |
| freq_next = policy->min; |
| |
| if (!od_tuners.powersave_bias) { |
| __cpufreq_driver_target(policy, freq_next, |
| CPUFREQ_RELATION_L); |
| } else { |
| int freq = powersave_bias_target(policy, freq_next, |
| CPUFREQ_RELATION_L); |
| __cpufreq_driver_target(policy, freq, |
| CPUFREQ_RELATION_L); |
| } |
| } |
| } |
| |
| static void od_timer_update(struct od_cpu_dbs_info_s *dbs_info, bool sample, |
| struct delayed_work *dw) |
| { |
| unsigned int cpu = dbs_info->cdbs.cpu; |
| int delay, sample_type = dbs_info->sample_type; |
| |
| /* Common NORMAL_SAMPLE setup */ |
| dbs_info->sample_type = OD_NORMAL_SAMPLE; |
| if (sample_type == OD_SUB_SAMPLE) { |
| delay = dbs_info->freq_lo_jiffies; |
| if (sample) |
| __cpufreq_driver_target(dbs_info->cdbs.cur_policy, |
| dbs_info->freq_lo, |
| CPUFREQ_RELATION_H); |
| } else { |
| if (sample) |
| dbs_check_cpu(&od_dbs_data, cpu); |
| if (dbs_info->freq_lo) { |
| /* Setup timer for SUB_SAMPLE */ |
| dbs_info->sample_type = OD_SUB_SAMPLE; |
| delay = dbs_info->freq_hi_jiffies; |
| } else { |
| delay = delay_for_sampling_rate(od_tuners.sampling_rate |
| * dbs_info->rate_mult); |
| } |
| } |
| |
| schedule_delayed_work_on(smp_processor_id(), dw, delay); |
| } |
| |
| static void od_timer_coordinated(struct od_cpu_dbs_info_s *dbs_info_local, |
| struct delayed_work *dw) |
| { |
| struct od_cpu_dbs_info_s *dbs_info; |
| ktime_t time_now; |
| s64 delta_us; |
| bool sample = true; |
| |
| /* use leader CPU's dbs_info */ |
| dbs_info = &per_cpu(od_cpu_dbs_info, dbs_info_local->cdbs.cpu); |
| mutex_lock(&dbs_info->cdbs.timer_mutex); |
| |
| time_now = ktime_get(); |
| delta_us = ktime_us_delta(time_now, dbs_info->cdbs.time_stamp); |
| |
| /* Do nothing if we recently have sampled */ |
| if (delta_us < (s64)(od_tuners.sampling_rate / 2)) |
| sample = false; |
| else |
| dbs_info->cdbs.time_stamp = time_now; |
| |
| od_timer_update(dbs_info, sample, dw); |
| mutex_unlock(&dbs_info->cdbs.timer_mutex); |
| } |
| |
| static void od_dbs_timer(struct work_struct *work) |
| { |
| struct delayed_work *dw = to_delayed_work(work); |
| struct od_cpu_dbs_info_s *dbs_info = |
| container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work); |
| |
| if (dbs_sw_coordinated_cpus(&dbs_info->cdbs)) { |
| od_timer_coordinated(dbs_info, dw); |
| } else { |
| mutex_lock(&dbs_info->cdbs.timer_mutex); |
| od_timer_update(dbs_info, true, dw); |
| mutex_unlock(&dbs_info->cdbs.timer_mutex); |
| } |
| } |
| |
| /************************** sysfs interface ************************/ |
| |
| static ssize_t show_sampling_rate_min(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", od_dbs_data.min_sampling_rate); |
| } |
| |
| /** |
| * update_sampling_rate - update sampling rate effective immediately if needed. |
| * @new_rate: new sampling rate |
| * |
| * If new rate is smaller than the old, simply updaing |
| * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the |
| * original sampling_rate was 1 second and the requested new sampling rate is 10 |
| * ms because the user needs immediate reaction from ondemand governor, but not |
| * sure if higher frequency will be required or not, then, the governor may |
| * change the sampling rate too late; up to 1 second later. Thus, if we are |
| * reducing the sampling rate, we need to make the new value effective |
| * immediately. |
| */ |
| static void update_sampling_rate(unsigned int new_rate) |
| { |
| int cpu; |
| |
| od_tuners.sampling_rate = new_rate = max(new_rate, |
| od_dbs_data.min_sampling_rate); |
| |
| for_each_online_cpu(cpu) { |
| struct cpufreq_policy *policy; |
| struct od_cpu_dbs_info_s *dbs_info; |
| unsigned long next_sampling, appointed_at; |
| |
| policy = cpufreq_cpu_get(cpu); |
| if (!policy) |
| continue; |
| if (policy->governor != &cpufreq_gov_ondemand) { |
| cpufreq_cpu_put(policy); |
| continue; |
| } |
| dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu); |
| cpufreq_cpu_put(policy); |
| |
| mutex_lock(&dbs_info->cdbs.timer_mutex); |
| |
| if (!delayed_work_pending(&dbs_info->cdbs.work)) { |
| mutex_unlock(&dbs_info->cdbs.timer_mutex); |
| continue; |
| } |
| |
| next_sampling = jiffies + usecs_to_jiffies(new_rate); |
| appointed_at = dbs_info->cdbs.work.timer.expires; |
| |
| if (time_before(next_sampling, appointed_at)) { |
| |
| mutex_unlock(&dbs_info->cdbs.timer_mutex); |
| cancel_delayed_work_sync(&dbs_info->cdbs.work); |
| mutex_lock(&dbs_info->cdbs.timer_mutex); |
| |
| schedule_delayed_work_on(dbs_info->cdbs.cpu, |
| &dbs_info->cdbs.work, |
| usecs_to_jiffies(new_rate)); |
| |
| } |
| mutex_unlock(&dbs_info->cdbs.timer_mutex); |
| } |
| } |
| |
| static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| update_sampling_rate(input); |
| return count; |
| } |
| |
| static ssize_t store_io_is_busy(struct kobject *a, struct attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| od_tuners.io_is_busy = !!input; |
| return count; |
| } |
| |
| static ssize_t store_up_threshold(struct kobject *a, struct attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| |
| if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || |
| input < MIN_FREQUENCY_UP_THRESHOLD) { |
| return -EINVAL; |
| } |
| od_tuners.up_threshold = input; |
| return count; |
| } |
| |
| static ssize_t store_sampling_down_factor(struct kobject *a, |
| struct attribute *b, const char *buf, size_t count) |
| { |
| unsigned int input, j; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| |
| if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) |
| return -EINVAL; |
| od_tuners.sampling_down_factor = input; |
| |
| /* Reset down sampling multiplier in case it was active */ |
| for_each_online_cpu(j) { |
| struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, |
| j); |
| dbs_info->rate_mult = 1; |
| } |
| return count; |
| } |
| |
| static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| |
| unsigned int j; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| |
| if (input > 1) |
| input = 1; |
| |
| if (input == od_tuners.ignore_nice) { /* nothing to do */ |
| return count; |
| } |
| od_tuners.ignore_nice = input; |
| |
| /* we need to re-evaluate prev_cpu_idle */ |
| for_each_online_cpu(j) { |
| struct od_cpu_dbs_info_s *dbs_info; |
| dbs_info = &per_cpu(od_cpu_dbs_info, j); |
| dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j, |
| &dbs_info->cdbs.prev_cpu_wall); |
| if (od_tuners.ignore_nice) |
| dbs_info->cdbs.prev_cpu_nice = |
| kcpustat_cpu(j).cpustat[CPUTIME_NICE]; |
| |
| } |
| return count; |
| } |
| |
| static ssize_t store_powersave_bias(struct kobject *a, struct attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| ret = sscanf(buf, "%u", &input); |
| |
| if (ret != 1) |
| return -EINVAL; |
| |
| if (input > 1000) |
| input = 1000; |
| |
| od_tuners.powersave_bias = input; |
| ondemand_powersave_bias_init(); |
| return count; |
| } |
| |
| show_one(od, sampling_rate, sampling_rate); |
| show_one(od, io_is_busy, io_is_busy); |
| show_one(od, up_threshold, up_threshold); |
| show_one(od, sampling_down_factor, sampling_down_factor); |
| show_one(od, ignore_nice_load, ignore_nice); |
| show_one(od, powersave_bias, powersave_bias); |
| |
| define_one_global_rw(sampling_rate); |
| define_one_global_rw(io_is_busy); |
| define_one_global_rw(up_threshold); |
| define_one_global_rw(sampling_down_factor); |
| define_one_global_rw(ignore_nice_load); |
| define_one_global_rw(powersave_bias); |
| define_one_global_ro(sampling_rate_min); |
| |
| static struct attribute *dbs_attributes[] = { |
| &sampling_rate_min.attr, |
| &sampling_rate.attr, |
| &up_threshold.attr, |
| &sampling_down_factor.attr, |
| &ignore_nice_load.attr, |
| &powersave_bias.attr, |
| &io_is_busy.attr, |
| NULL |
| }; |
| |
| static struct attribute_group od_attr_group = { |
| .attrs = dbs_attributes, |
| .name = "ondemand", |
| }; |
| |
| /************************** sysfs end ************************/ |
| |
| define_get_cpu_dbs_routines(od_cpu_dbs_info); |
| |
| static struct od_ops od_ops = { |
| .io_busy = should_io_be_busy, |
| .powersave_bias_init_cpu = ondemand_powersave_bias_init_cpu, |
| .powersave_bias_target = powersave_bias_target, |
| .freq_increase = dbs_freq_increase, |
| }; |
| |
| static struct dbs_data od_dbs_data = { |
| .governor = GOV_ONDEMAND, |
| .attr_group = &od_attr_group, |
| .tuners = &od_tuners, |
| .get_cpu_cdbs = get_cpu_cdbs, |
| .get_cpu_dbs_info_s = get_cpu_dbs_info_s, |
| .gov_dbs_timer = od_dbs_timer, |
| .gov_check_cpu = od_check_cpu, |
| .gov_ops = &od_ops, |
| }; |
| |
| static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy, |
| unsigned int event) |
| { |
| return cpufreq_governor_dbs(&od_dbs_data, policy, event); |
| } |
| |
| #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND |
| static |
| #endif |
| struct cpufreq_governor cpufreq_gov_ondemand = { |
| .name = "ondemand", |
| .governor = od_cpufreq_governor_dbs, |
| .max_transition_latency = TRANSITION_LATENCY_LIMIT, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int __init cpufreq_gov_dbs_init(void) |
| { |
| u64 idle_time; |
| int cpu = get_cpu(); |
| |
| mutex_init(&od_dbs_data.mutex); |
| idle_time = get_cpu_idle_time_us(cpu, NULL); |
| put_cpu(); |
| if (idle_time != -1ULL) { |
| /* Idle micro accounting is supported. Use finer thresholds */ |
| od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; |
| od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL; |
| /* |
| * In nohz/micro accounting case we set the minimum frequency |
| * not depending on HZ, but fixed (very low). The deferred |
| * timer might skip some samples if idle/sleeping as needed. |
| */ |
| od_dbs_data.min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE; |
| } else { |
| /* For correct statistics, we need 10 ticks for each measure */ |
| od_dbs_data.min_sampling_rate = MIN_SAMPLING_RATE_RATIO * |
| jiffies_to_usecs(10); |
| } |
| |
| return cpufreq_register_governor(&cpufreq_gov_ondemand); |
| } |
| |
| static void __exit cpufreq_gov_dbs_exit(void) |
| { |
| cpufreq_unregister_governor(&cpufreq_gov_ondemand); |
| } |
| |
| MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); |
| MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); |
| MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " |
| "Low Latency Frequency Transition capable processors"); |
| MODULE_LICENSE("GPL"); |
| |
| #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND |
| fs_initcall(cpufreq_gov_dbs_init); |
| #else |
| module_init(cpufreq_gov_dbs_init); |
| #endif |
| module_exit(cpufreq_gov_dbs_exit); |