powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 09eeb43..1569117 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -247,34 +247,37 @@
};
};
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x9 0x4>;
- reg = <1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&gef_pic>;
- interrupts = <0x8 0x4>;
- reg = <3>;
- };
- };
-
enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
};
enet1: ethernet@26000 {