Merge branch 'master' into for-next
diff --git a/Documentation/Changes b/Documentation/Changes
index eca9f6e..4fb88f1 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -331,7 +331,7 @@
Mkinitrd
--------
-o <ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/>
+o <https://code.launchpad.net/initrd-tools/main>
E2fsprogs
---------
@@ -343,11 +343,11 @@
Reiserfsprogs
-------------
-o <http://www.namesys.com/pub/reiserfsprogs/reiserfsprogs-3.6.3.tar.gz>
+o <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
Xfsprogs
--------
-o <ftp://oss.sgi.com/projects/xfs/download/>
+o <ftp://oss.sgi.com/projects/xfs/>
Pcmciautils
-----------
@@ -387,18 +387,18 @@
mcelog
------
-o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/>
Networking
**********
PPP
---
-o <ftp://ftp.samba.org/pub/ppp/ppp-2.4.0.tar.gz>
+o <ftp://ftp.samba.org/pub/ppp/>
Isdn4k-utils
------------
-o <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/isdn4k-utils.v3.1pre1.tar.gz>
+o <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
NFS-utils
---------
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 7f6de6e..6148d40 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -581,7 +581,7 @@
8. Vendor and device identifications
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-One is not not required to add new device ids to include/linux/pci_ids.h.
+One is not required to add new device ids to include/linux/pci_ids.h.
Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1571c0c..40a9c32 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -93,7 +93,7 @@
inputs. This framework was never widely used, and most attempts to
use it were broken. Drivers should instead be exposing domain-specific
interfaces either to kernel or to userspace.
-Who: Pavel Machek <pavel@suse.cz>
+Who: Pavel Machek <pavel@ucw.cz>
---------------------------
diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c
index 681ec22..a4a8fc5 100644
--- a/Documentation/hwmon/hpfall.c
+++ b/Documentation/hwmon/hpfall.c
@@ -1,7 +1,7 @@
/* Disk protection for HP machines.
*
* Copyright 2008 Eric Piel
- * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ * Copyright 2009 Pavel Machek <pavel@ucw.cz>
*
* GPLv2.
*/
diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.txt
index 3b26bb5..a1b8f72 100644
--- a/Documentation/power/tricks.txt
+++ b/Documentation/power/tricks.txt
@@ -1,6 +1,6 @@
swsusp/S3 tricks
~~~~~~~~~~~~~~~~
-Pavel Machek <pavel@suse.cz>
+Pavel Machek <pavel@ucw.cz>
If you want to trick swsusp/S3 into working, you might want to try:
diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt
index 8df0b78..33ed800 100644
--- a/Documentation/rt-mutex-design.txt
+++ b/Documentation/rt-mutex-design.txt
@@ -364,7 +364,7 @@
The functions implementing the task adjustments are rt_mutex_adjust_prio,
__rt_mutex_adjust_prio (same as the former, but expects the task pi_lock
-to already be taken), rt_mutex_get_prio, and rt_mutex_setprio.
+to already be taken), rt_mutex_getprio, and rt_mutex_setprio.
rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio.
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index e759e92..337c924 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -807,7 +807,7 @@
lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
remove checking of list emptiness before calling lpfc_disc_done,
- it handles the emtpy list case just fine and the additional
+ it handles the empty list case just fine and the additional
instructions cost less then the bustlocked spinlock operations.
* Integrated patch from Christoph Hellwig: This adds a new 64bit
counter instead, brd_no isn't reused anymore. Also some tiny
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 9b659c7..4909d41 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -1,5 +1,5 @@
Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
Copyright 2006 Bob Copeland <me@bobcopeland.com>
Using sparse for typechecking
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 5fdbb61..82b2da1 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -196,7 +196,7 @@
legacy_va_layout
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+If non-zero, this sysctl disables the new 32-bit mmap layout - the kernel
will use the legacy (2.4) layout for all processes.
==============================================================
diff --git a/Documentation/zh_CN/sparse.txt b/Documentation/zh_CN/sparse.txt
index 75992a6..cc144e5 100644
--- a/Documentation/zh_CN/sparse.txt
+++ b/Documentation/zh_CN/sparse.txt
@@ -22,7 +22,7 @@
---------------------------------------------------------------------
Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
Copyright 2006 Bob Copeland <me@bobcopeland.com>
使用 sparse 工具做类型检查
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
index fd1d919..3e8c47c 100644
--- a/arch/arm/mach-imx/dma-v1.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -310,7 +310,7 @@
imxdma->resbytes = dma_length;
if (!sg || !sgcount) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+ printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
channel);
return -EINVAL;
}
@@ -760,7 +760,6 @@
* @name: the driver/caller own non-%NULL identification
*
* This function tries to find a free channel in the specified priority group
- * This function tries to find a free channel in the specified priority group
* if the priority cannot be achieved it tries to look for free channel
* in the higher and then even lower priority groups.
*
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index af5e85b..f060a39 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -98,7 +98,7 @@
/*
* ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ * out to optimized speed switching. Initialize loops_per_jiffy to 0.
*
* Table stepping up/down is optimized for 256mhz jumps while staying on the
* same PLL.
@@ -494,7 +494,7 @@
* Clock driver initialization
*---------------------------------------------------------------------------*/
-/* Initalize the lpj field in the acpu_freq_tbl. */
+/* Initialize the lpj field in the acpu_freq_tbl. */
static void __init lpj_init(void)
{
int i;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b32ccd95..ed8d330 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -463,7 +463,7 @@
}
if (!ret) {
/*
- * Switch the parent clock in the heirarchy, and make sure
+ * Switch the parent clock in the hierarchy, and make sure
* that the new parent's usecount is correct. Note: we
* enable the new parent before disabling the old to avoid
* any unnecessary hardware disable->enable transitions.
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d522cd7..ba53191 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -60,7 +60,7 @@
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
.text
-/* Function to aquire the semaphore in scratchpad */
+/* Function to acquire the semaphore in scratchpad */
ENTRY(lock_scratchpad_sem)
stmfd sp!, {lr} @ save registers on stack
wait_sem:
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 5d5f330..16e682d 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*
* ChangeLog:
- * 2006 Pavel Machek <pavel@suse.cz>
+ * 2006 Pavel Machek <pavel@ucw.cz>
* 03-06-2004 John Lenz <lenz@cs.wisc.edu>
* 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
* 04-16-2001 Lineo Japan,Inc. ...
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 5f34eb6..653b3e0 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1561,13 +1561,6 @@
printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
"(chip ID 0x%04x)\n", chipname, val);
-#ifdef CONFIG_MACH_U300_BS26
- if ((val & 0xFF00U) != 0xc800) {
- printk(KERN_ERR "Platform configured for BS25/BS26 " \
- "with DB3150 but %s detected, expect problems!",
- chipname);
- }
-#endif
#ifdef CONFIG_MACH_U300_BS330
if ((val & 0xFF00U) != 0xd800) {
printk(KERN_ERR "Platform configured for BS330 " \
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 5f61fd4..d927901 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -523,7 +523,7 @@
/*
* Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
- * to output and 'GPIO_IN' to input for each port. And initalize
+ * to output and 'GPIO_IN' to input for each port. And initialize
* default value on outputs.
*/
for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 8474d05..931d26d 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -43,7 +43,7 @@
#include <plat/cpu.h>
#include <plat/pll.h>
-/* initalise all the clocks */
+/* initialise all the clocks */
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 8bf79f3..90a2051 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -391,7 +391,7 @@
(clkp->enable)(clkp, 0);
}
-/* initalise all the clocks */
+/* initialise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
index d2aab3a..555eec6 100644
--- a/arch/arm/plat-spear/padmux.c
+++ b/arch/arm/plat-spear/padmux.c
@@ -66,7 +66,7 @@
* If peripheral is not supported by current mode then request is rejected.
* Conflicts between peripherals are not handled and peripherals will be
* enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enalbed will be present.
+ * In case of conflicts last peripheral enabled will be present.
* Returns -ve on Err otherwise 0
*/
static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c
index 9e8b69c..1b17d92 100644
--- a/arch/cris/arch-v32/mm/intmem.c
+++ b/arch/cris/arch-v32/mm/intmem.c
@@ -33,8 +33,8 @@
{
static int initiated = 0;
if (!initiated) {
- struct intmem_allocation* alloc =
- (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL);
+ struct intmem_allocation* alloc;
+ alloc = kmalloc(sizeof *alloc, GFP_KERNEL);
INIT_LIST_HEAD(&intmem_allocations);
intmem_virtual = ioremap(MEM_INTMEM_START + RESERVED_SIZE,
MEM_INTMEM_SIZE - RESERVED_SIZE);
@@ -62,9 +62,8 @@
if (allocation->status == STATUS_FREE &&
allocation->size >= size + alignment) {
if (allocation->size > size + alignment) {
- struct intmem_allocation* alloc =
- (struct intmem_allocation*)
- kmalloc(sizeof *alloc, GFP_ATOMIC);
+ struct intmem_allocation* alloc;
+ alloc = kmalloc(sizeof *alloc, GFP_ATOMIC);
alloc->status = STATUS_FREE;
alloc->size = allocation->size - size -
alignment;
@@ -74,9 +73,7 @@
if (alignment) {
struct intmem_allocation *tmp;
- tmp = (struct intmem_allocation *)
- kmalloc(sizeof *tmp,
- GFP_ATOMIC);
+ tmp = kmalloc(sizeof *tmp, GFP_ATOMIC);
tmp->offset = allocation->offset;
tmp->size = alignment;
tmp->status = STATUS_FREE;
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
index 4883ba7..a2ae5e9 100644
--- a/arch/h8300/kernel/timer/itu.c
+++ b/arch/h8300/kernel/timer/itu.c
@@ -73,7 +73,7 @@
setup_irq(ITUIRQ, &itu_irq);
- /* initalize timer */
+ /* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, ITUBASE + TCR);
ctrl_outb(0x01, ITUBASE + TIER);
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
index 042dbb5..ae0d381 100644
--- a/arch/h8300/kernel/timer/timer16.c
+++ b/arch/h8300/kernel/timer/timer16.c
@@ -68,7 +68,7 @@
setup_irq(_16IRQ, &timer16_irq);
- /* initalize timer */
+ /* initialize timer */
ctrl_outb(0, TSTR);
ctrl_outb(CCLR0 | div, _16BASE + TCR);
ctrl_outw(cnt, _16BASE + GRA);
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
index 38be0ca..3946c0f 100644
--- a/arch/h8300/kernel/timer/timer8.c
+++ b/arch/h8300/kernel/timer/timer8.c
@@ -94,7 +94,7 @@
ctrl_bclr(0, MSTPCRL)
#endif
- /* initalize timer */
+ /* initialize timer */
ctrl_outw(cnt, _8BASE + TCORA);
ctrl_outw(0x0000, _8BASE + _8TCSR);
ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 21b70137..9b109f2 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1237,7 +1237,7 @@
p_ctx->cr[2] = (unsigned long)kvm_vmm_info->vmm_ivt;
p_ctx->cr[8] = 0x3c;
- /*Initilize region register*/
+ /*Initialize region register*/
p_ctx->rr[0] = 0x30;
p_ctx->rr[1] = 0x30;
p_ctx->rr[2] = 0x30;
@@ -1246,7 +1246,7 @@
p_ctx->rr[5] = 0x30;
p_ctx->rr[7] = 0x30;
- /*Initilize branch register 0*/
+ /*Initialize branch register 0*/
p_ctx->br[0] = *(unsigned long *)kvm_vmm_info->vmm_entry;
vcpu->arch.vmm_rr = kvm->arch.vmm_init_rr;
@@ -1707,7 +1707,7 @@
BUG_ON(!module);
if (!kvm_vmm_base) {
- printk("kvm: kvm area hasn't been initilized yet!!\n");
+ printk("kvm: kvm area hasn't been initialized yet!!\n");
return -EFAULT;
}
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index d00dfc1..dbc4cbe 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -507,7 +507,7 @@
cnodeid_t cnode;
/*
- * Allocate & initalize the nodepda for each node.
+ * Allocate & initialize the nodepda for each node.
*/
for_each_online_node(cnode) {
nodepdaindr[cnode] =
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 72f6e85..592c707 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -25,7 +25,7 @@
ifeq ($(CPU_MAJOR),3)
CPUFLAGS-1 += -mno-xl-soft-mul
else
- # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
+ # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
endif
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 6fc6328..0167d53 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -3,7 +3,7 @@
*
* Distribute under GPLv2
*
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2002 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
*/
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 2c0ed87..3124cf7 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -136,7 +136,7 @@
* As lv1_read_htab_entries() does not give us the RPN, we can
* not synthesize the new hpte_r value here, and therefore can
* not update the hpte with lv1_insert_htab_entry(), so we
- * insted invalidate it and ask the caller to update it via
+ * instead invalidate it and ask the caller to update it via
* ps3_hpte_insert() by returning a -1 value.
*/
if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c
index defdd6e..befc255 100644
--- a/arch/sh/kernel/clkdev.c
+++ b/arch/sh/kernel/clkdev.c
@@ -36,7 +36,7 @@
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
*/
static struct clk *clk_find(const char *dev_id, const char *con_id)
{
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index e7f2940..da03115 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -216,7 +216,7 @@
switch (buffer[nbase+3]) {
case 'f':
if (initval) {
- fprintf(stderr, "Cannot use pre-initalized fixups for calls\n%s\n", buffer);
+ fprintf(stderr, "Cannot use pre-initialized fixups for calls\n%s\n", buffer);
exit(1);
}
if (!strcmp (sect, "__ksymtab")) {
@@ -273,7 +273,7 @@
break;
case 'i':
if (initval) {
- fprintf(stderr, "Cannot use pre-initalized fixups for INT\n%s\n", buffer);
+ fprintf(stderr, "Cannot use pre-initialized fixups for INT\n%s\n", buffer);
exit(1);
}
if (strncmp (buffer + mode+9, "HI22 ", 10) && strncmp (buffer + mode+9, "LO10 ", 10)) {
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index fcc3c61f..33cec15 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -2,7 +2,7 @@
* sleep.c - x86-specific ACPI sleep support.
*
* Copyright (C) 2001-2003 Patrick Mochel
- * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz>
*/
#include <linux/acpi.h>
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a96489e..980508c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -460,7 +460,7 @@
}
/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
+ * Setup the local APIC timer for this CPU. Copy the initialized values
* of the boot CPU and register the clock event in the framework.
*/
static void __cpuinit setup_APIC_timer(void)
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index c4f9182..4c9c67b 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -140,7 +140,7 @@
* is now the way life works).
* Fix thinko in suspend() (wrong return).
* Notify drivers on critical suspend.
- * Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz>
+ * Make kapmd absorb more idle time (Pavel Machek <pavel@ucw.cz>
* modified by sfr).
* Disable interrupts while we are suspended (Andy Henroid
* <andy_henroid@yahoo.com> fixed by sfr).
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 3e90cce..1376f41 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -9,7 +9,7 @@
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones on behalf of SuSE Labs
* (C) 2004 Dominik Brodowski <linux@brodo.de>
- * (C) 2004 Pavel Machek <pavel@suse.cz>
+ * (C) 2004 Pavel Machek <pavel@ucw.cz>
* Licensed under the terms of the GNU GPL License version 2.
* Based upon datasheets & sample CPUs kindly provided by AMD.
*
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index b2e2460..784360c 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -20,7 +20,7 @@
static void __init i386_default_early_setup(void)
{
- /* Initilize 32bit specific setup functions */
+ /* Initialize 32bit specific setup functions */
x86_init.resources.probe_roms = probe_roms;
x86_init.resources.reserve_resources = i386_reserve_resources;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index ee41bba..9a66746 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -2,7 +2,7 @@
* linux/arch/x86_64/mm/init.c
*
* Copyright (C) 1995 Linus Torvalds
- * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2000 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2002,2003 Andi Kleen <ak@suse.de>
*/
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 1290ba5..e7e8c5f 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -4,7 +4,7 @@
* Distribute under GPLv2
*
* Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl>
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2002 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
*/
diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index d24f983..460f314 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -4,7 +4,7 @@
* Distribute under GPLv2
*
* Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl>
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2002 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
*/
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 51ceaee..e1e7143 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -335,7 +335,7 @@
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
-#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
+#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1)
#ifdef CONFIG_PROC_FS
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index dff4870..ec1711f 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1087,7 +1087,7 @@
} else {
epoch->flags = 0;
atomic_set(&epoch->epoch_size, 0);
- /* atomic_set(&epoch->active, 0); is alrady zero */
+ /* atomic_set(&epoch->active, 0); is already zero */
if (rv == FE_STILL_LIVE)
rv = FE_RECYCLED;
}
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 218d091..16c3c86 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -4,7 +4,7 @@
* Note that you can not swap over this thing, yet. Seems to work but
* deadlocks sometimes - you can not swap over TCP in general.
*
- * Copyright 1997-2000, 2008 Pavel Machek <pavel@suse.cz>
+ * Copyright 1997-2000, 2008 Pavel Machek <pavel@ucw.cz>
* Parts copyright 2001 Steven Whitehouse <steve@chygwyn.com>
*
* This file is released under GPLv2 or later.
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 4561ce2..334cf5c 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -4845,7 +4845,7 @@
{
static unsigned short patterns[] =
{0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
- static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
+ static unsigned int count = ARRAY_SIZE(patterns);
unsigned int i;
int rc = 0;
diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h
index 7d4edb0..5f5fbc0 100644
--- a/drivers/crypto/amcc/crypto4xx_reg_def.h
+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
@@ -113,7 +113,7 @@
#define CRYPTO4XX_PRNG_LFSR_H 0x00070034
/**
- * Initilize CRYPTO ENGINE registers, and memory bases.
+ * Initialize CRYPTO ENGINE registers, and memory bases.
*/
#define PPC4XX_PDR_POLL 0x3ff
#define PPC4XX_OUTPUT_THRESHOLD 2
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index bd5250e..e880760 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -69,7 +69,7 @@
}
/**
- * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * atc_alloc_descriptor - allocate and return an initialized descriptor
* @chan: the channel to allocate descriptors for
* @gfp_flags: GFP allocation flags
*
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 8088b14..f0fd6db 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -10,7 +10,7 @@
* Description:
* DMA engine driver for Freescale MPC8540 DMA controller, which is
* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
- * The support for MPC8349 DMA contorller is also added.
+ * The support for MPC8349 DMA controller is also added.
*
* This driver instructs the DMA controller to issue the PCI Read Multiple
* command for PCI read operations, instead of using the default PCI Read Line
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f87bf10..9585e53 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -929,13 +929,11 @@
{ 1440, 576 },
{ 2880, 576 },
};
- static const int n_sizes =
- sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
if (!(pt->misc & DRM_EDID_PT_INTERLACED))
return;
- for (i = 0; i < n_sizes; i++) {
+ for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) {
if ((mode->hdisplay == cea_interlaced[i].w) &&
(mode->vdisplay == cea_interlaced[i].h / 2)) {
mode->vdisplay *= 2;
@@ -1375,7 +1373,6 @@
{ 1920, 1440, 60, 0 },
{ 1920, 1440, 75, 0 },
};
-static const int num_est3_modes = sizeof(est3_modes) / sizeof(est3_modes[0]);
static int
drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing)
@@ -1387,7 +1384,7 @@
for (i = 0; i < 6; i++) {
for (j = 7; j > 0; j--) {
m = (i * 8) + (7 - j);
- if (m >= num_est3_modes)
+ if (m >= ARRAY_SIZE(est3_modes))
break;
if (est[i] & (1 << j)) {
mode = drm_mode_find_dmt(connector->dev,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 76993ac..03c231b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -392,13 +392,13 @@
DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
for (; i < 8; i++)
DRM_LOG_KMS(" ");
- for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) {
if (cmd == sdvo_cmd_names[i].cmd) {
DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name);
break;
}
}
- if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0]))
+ if (i == ARRAY_SIZE(sdvo_cmd_names))
DRM_LOG_KMS("(%02X)", cmd);
DRM_LOG_KMS("\n");
}
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 6d553c2..d2d4e40 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1424,7 +1424,7 @@
int j, count = 0;
u64 tmp;
- for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]);
+ for (j = 0; j < ARRAY_SIZE(input_res_table);
j++) {
struct input_res *input = &input_res_table[j];
unsigned int hactive_s = input->w;
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index 2d0c9ca..fa05cda 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -552,7 +552,7 @@
/*
- * Initalize mappings. On Savage4 and SavageIX the alignment
+ * Initialize mappings. On Savage4 and SavageIX the alignment
* and size of the aperture is not suitable for automatic MTRR setup
* in drm_addmap. Therefore we add them manually before the maps are
* initialized, and tear them down on last close.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 8612378..5f2d5df 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1017,7 +1017,7 @@
}
/*
- * Stream managment
+ * Stream management
*/
static void vmw_stream_destroy(struct vmw_resource *res)
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index c102d23..7939953 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -92,7 +92,7 @@
/*
* On HPA drives the capacity needs to be
- * reinitilized on resume otherwise the disk
+ * reinitialized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index ae47bfd..9bbb65b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -816,7 +816,7 @@
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&rchp->cq);
@@ -827,7 +827,7 @@
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
cxio_flush_hw_cq(&schp->cq);
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 7065cb3..86b93f2 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -905,7 +905,7 @@
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&rchp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&rchp->cq);
@@ -916,7 +916,7 @@
if (flushed)
(*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context);
- /* locking heirarchy: cq lock first, then qp lock. */
+ /* locking hierarchy: cq lock first, then qp lock. */
spin_lock_irqsave(&schp->lock, *flag);
spin_lock(&qhp->lock);
c4iw_flush_hw_cq(&schp->cq);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h
index 39c1c36..a46e514 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.h
+++ b/drivers/infiniband/hw/ehca/hcp_if.h
@@ -49,7 +49,7 @@
#include "hipz_hw.h"
/*
- * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize
+ * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize
* resources, create the empty EQPT (ring).
*/
u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle,
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 9c5c66d..65eb892 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -2055,7 +2055,7 @@
mutex_lock(&ipath_mutex);
- fd = (struct ipath_filedata *) fp->private_data;
+ fd = fp->private_data;
fp->private_data = NULL;
pd = fd->pd;
if (!pd) {
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0fe27ba..c431d09 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -1118,7 +1118,7 @@
if (error)
goto err_free_mem;
- /* initilize and request sw/hw resources */
+ /* initialize and request sw/hw resources */
ad714x_hw_init(ad714x);
mutex_init(&ad714x->mutex);
diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c
index d421536..472a2af 100644
--- a/drivers/isdn/hardware/mISDN/avmfritz.c
+++ b/drivers/isdn/hardware/mISDN/avmfritz.c
@@ -1116,7 +1116,7 @@
release_card(card);
else
if (debug)
- pr_info("%s: drvdata allready removed\n", __func__);
+ pr_info("%s: drvdata already removed\n", __func__);
}
static struct pci_device_id fcpci_ids[] __devinitdata = {
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 095ed76..d317195 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -4268,7 +4268,7 @@
goto error;
/*
* Finally enable IRQ output
- * this is only allowed, if an IRQ routine is allready
+ * this is only allowed, if an IRQ routine is already
* established for this HFC, so don't do that earlier
*/
spin_lock_irqsave(&hc->lock, flags);
@@ -5212,7 +5212,7 @@
spin_unlock_irqrestore(&HFClock, flags);
} else {
if (debug)
- printk(KERN_DEBUG "%s: drvdata allready removed\n",
+ printk(KERN_DEBUG "%s: drvdata already removed\n",
__func__);
}
}
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 5940a2c..65ded05 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1773,7 +1773,7 @@
inithfcpci(hc);
/*
* Finally enable IRQ output
- * this is only allowed, if an IRQ routine is allready
+ * this is only allowed, if an IRQ routine is already
* established for this HFC, so don't do that earlier
*/
enable_hwirq(hc);
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index f5b3d2b..4975976 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -1150,7 +1150,7 @@
if (card)
release_card(card);
else
- pr_debug("%s: drvdata allready removed\n", __func__);
+ pr_debug("%s: drvdata already removed\n", __func__);
}
static struct pci_driver infineon_driver = {
diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c
index d097a4e..9e07246 100644
--- a/drivers/isdn/hardware/mISDN/speedfax.c
+++ b/drivers/isdn/hardware/mISDN/speedfax.c
@@ -484,7 +484,7 @@
if (card)
release_card(card);
else
- pr_debug("%s: drvdata allready removed\n", __func__);
+ pr_debug("%s: drvdata already removed\n", __func__);
}
static struct pci_device_id sfaxpci_ids[] __devinitdata = {
diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c
index 31f9d71..9e84870 100644
--- a/drivers/isdn/hardware/mISDN/w6692.c
+++ b/drivers/isdn/hardware/mISDN/w6692.c
@@ -1402,7 +1402,7 @@
release_card(card);
else
if (debug)
- pr_notice("%s: drvdata allready removed\n", __func__);
+ pr_notice("%s: drvdata already removed\n", __func__);
}
static struct pci_device_id w6692_ids[] = {
diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c
index f58ded8..f150330 100644
--- a/drivers/isdn/hisax/callc.c
+++ b/drivers/isdn/hisax/callc.c
@@ -1172,7 +1172,7 @@
kfree(csta->channel[i].b_st);
csta->channel[i].b_st = NULL;
} else
- printk(KERN_WARNING "CallcFreeChan b_st ch%d allready freed\n", i);
+ printk(KERN_WARNING "CallcFreeChan b_st ch%d already freed\n", i);
if (i || test_bit(FLG_TWO_DCHAN, &csta->HW_Flags)) {
release_d_st(csta->channel + i);
} else
diff --git a/drivers/isdn/hisax/tei.c b/drivers/isdn/hisax/tei.c
index f4cb178..842f9c9 100644
--- a/drivers/isdn/hisax/tei.c
+++ b/drivers/isdn/hisax/tei.c
@@ -130,7 +130,7 @@
if (st->l2.tei != -1) {
st->ma.tei_m.printdebug(&st->ma.tei_m,
- "assign request for allready asigned tei %d",
+ "assign request for already asigned tei %d",
st->l2.tei);
return;
}
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 34e898f..1b85d9d 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -457,7 +457,7 @@
if (tm->l2->tei != GROUP_TEI) {
tm->tei_m.printdebug(&tm->tei_m,
- "assign request for allready assigned tei %d",
+ "assign request for already assigned tei %d",
tm->l2->tei);
return;
}
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 0c87a3c..a19f649 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1297,7 +1297,7 @@
EXPORT_SYMBOL_GPL(smsclient_sendrequest);
-/* old GPIO managments implementation */
+/* old GPIO managements implementation */
int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
struct smscore_config_gpio *pinconfig)
{
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 0c786e0..d0a133a 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -805,7 +805,7 @@
/* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 1);
- /* Twice sequencial need status 0xff->0x9e->0x9d */
+ /* Twice sequential need status 0xff->0x9e->0x9d */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 0);
@@ -880,7 +880,7 @@
/* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 1);
- /* Twice sequencial need status 0xff->0x9e->0x9d */
+ /* Twice sequential need status 0xff->0x9e->0x9d */
spca504A_acknowledged_command(gspca_dev, 0x24,
8, 3, 0x9e, 0);
spca504A_acknowledged_command(gspca_dev, 0x24,
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 6030410..5d6fd01 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -2,7 +2,7 @@
* USB ViCam WebCam driver
* Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
* Christopher L Cheney (ccheney@cheney.cx),
- * Pavel Machek (pavel@suse.cz),
+ * Pavel Machek (pavel@ucw.cz),
* John Tyner (jtyner@cs.ucr.edu),
* Monroe Williams (monroe@pobox.com)
*
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 9004a5f..d2f20c2 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -5,7 +5,7 @@
* Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 2001,2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2003 Pavel Machek (pavel@suse.cz)
+ * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz)
* Copyright (C) 2005 Philippe De Muyter (phdm@macqel.be)
* Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
*
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 8997add..307e847 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -391,7 +391,7 @@
struct mutex resource_lock; /* prevent evil stuff */
- u8 initialized; /* flag if zoran has been correctly initalized */
+ u8 initialized; /* flag if zoran has been correctly initialized */
int user; /* number of current users */
struct card_info card;
struct tvnorm *timing;
diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c
index e6ad4b2..6f846ab 100644
--- a/drivers/media/video/zoran/zoran_device.c
+++ b/drivers/media/video/zoran/zoran_device.c
@@ -484,7 +484,7 @@
zr->overlay_settings.format);
/* Start and length of each line MUST be 4-byte aligned.
- * This should be allready checked before the call to this routine.
+ * This should be already checked before the call to this routine.
* All error messages are internal driver checking only! */
/* video display top and bottom registers */
diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c
index 639dd87..e198560 100644
--- a/drivers/media/video/zoran/zr36050.c
+++ b/drivers/media/video/zoran/zr36050.c
@@ -236,7 +236,7 @@
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36050 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36050_dqt[0x86] = {
diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c
index 008746f..5e4f57c 100644
--- a/drivers/media/video/zoran/zr36060.c
+++ b/drivers/media/video/zoran/zr36060.c
@@ -227,7 +227,7 @@
Could be variable, but until it's not needed it they are just fixed to save
memory. Otherwise expand zr36060 structure with arrays, push the values to
- it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+ it and initialize from there, as e.g. the linux zr36057/60 driver does it.
========================================================================= */
static const char zr36060_dqt[0x86] = {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index a6a5701..14d162f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1794,7 +1794,7 @@
ioc->sh = NULL;
ioc->cached_fw = NULL;
- /* Initilize SCSI Config Data structure
+ /* Initialize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
@@ -2471,7 +2471,7 @@
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
/*
- * Initalize link list for inactive raid volumes.
+ * Initialize link list for inactive raid volumes.
*/
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ca03428..3dfda9c 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1836,7 +1836,7 @@
.pattern = mirror_pattern,
};
-/* initalize driver data structures */
+/* initialize driver data structures */
void denali_drv_init(struct denali_nand_info *denali)
{
denali->idx = 0;
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 38395df..70705d1 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -729,14 +729,14 @@
* mc32_load_rx_ring - load the ring of receive buffers
* @dev: 3c527 to build the ring for
*
- * This initalises the on-card and driver datastructures to
+ * This initialises the on-card and driver datastructures to
* the point where mc32_start_transceiver() can be called.
*
* The card sets up the receive ring for us. We are required to use the
* ring it provides, although the size of the ring is configurable.
*
* We allocate an sk_buff for each ring entry in turn and
- * initalise its house-keeping info. At the same time, we read
+ * initialise its house-keeping info. At the same time, we read
* each 'next' pointer in our rx_ring array. This reduces slow
* shared-memory reads and makes it easy to access predecessor
* descriptors.
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index 79636ee..0362c8d 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -80,7 +80,7 @@
if (version_printed++ == 0)
printk(version);
- /* Initalize the device structure. */
+ /* Initialize the device structure. */
dev->netdev_ops = &ipddp_netdev_ops;
dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index 063026d..3f1b7c3 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -52,7 +52,7 @@
*/
#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
-/********* Power managment (WOL) **********/
+/********* Power management (WOL) **********/
#define PCICFG_PM_CONTROL_OFFSET 0x44
#define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 28b53d1..efd4c70 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -916,7 +916,7 @@
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
- /* cur_filer_idx indicated the fisrt non-masked rule */
+ /* cur_filer_idx indicated the first non-masked rule */
priv->cur_filer_idx = rqfar;
/* Rest are masked rules */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 68e5ac8..dfc787f 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1071,7 +1071,7 @@
if (lp->mode == 1)
hp100_init_pdls(dev);
- /* Go to performance page and initalize isr and imr registers */
+ /* Go to performance page and initialize isr and imr registers */
hp100_page(PERFORMANCE);
hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index b150c10..0f1d4e9 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1045,7 +1045,7 @@
DBG(dev, "change_mtu(%d)" NL, new_mtu);
if (netif_running(ndev)) {
- /* Check if we really need to reinitalize RX ring */
+ /* Check if we really need to reinitialize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 7805bbf..aa50ee1 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -6812,7 +6812,7 @@
static int fast_aging;
/**
- * netdev_init - initalize network device.
+ * netdev_init - initialize network device.
* @dev: Network device.
*
* This function initializes the network device.
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 6474c49..dc6bf04 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -449,7 +449,7 @@
return (0);
}
-/* Initilize temac */
+/* Initialize temac */
static void temac_device_reset(struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 501a55f..70a9bc5 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1325,7 +1325,7 @@
bitbang->mdc_msk = 0x01;
bitbang->ctrl.ops = &bb_ops;
- /* MII contorller setting */
+ /* MII controller setting */
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus) {
ret = -ENOMEM;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 29e6c63..0bc4f30 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -589,7 +589,7 @@
db->dm910x_chk_mode = 1; /* Enter the check mode */
}
- /* Initilize DM910X board */
+ /* Initialize DM910X board */
dmfe_init_dm910x(dev);
/* Active System Interface */
@@ -606,9 +606,9 @@
}
-/* Initilize DM910X board
+/* Initialize DM910X board
* Reset DM910X board
- * Initilize TX/Rx descriptor chain structure
+ * Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
@@ -649,7 +649,7 @@
if ( !(db->media_mode & DMFE_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
- /* Initiliaze Transmit/Receive decriptor and CR3/4 */
+ /* Initialize Transmit/Receive decriptor and CR3/4 */
dmfe_descriptor_init(db, ioaddr);
/* Init CR6 to program DM910x operation */
@@ -1288,7 +1288,7 @@
* Stop DM910X board
* Free Tx/Rx allocated memory
* Reset DM910X board
- * Re-initilize DM910X board
+ * Re-initialize DM910X board
*/
static void dmfe_dynamic_reset(struct DEVICE *dev)
@@ -1316,7 +1316,7 @@
netif_carrier_off(dev);
db->wait_reset = 0;
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Restart upper layer interface */
@@ -1447,7 +1447,7 @@
/*
* Send a setup frame for DM9132
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void dm9132_id_table(struct DEVICE *dev)
@@ -1489,7 +1489,7 @@
/*
* Send a setup frame for DM9102/DM9102A
- * This setup frame initilize DM910X address filter mode
+ * This setup frame initialize DM910X address filter mode
*/
static void send_filter_frame(struct DEVICE *dev)
@@ -2142,7 +2142,7 @@
pci_set_power_state(pci_dev, PCI_D0);
pci_restore_state(pci_dev);
- /* Re-initilize DM910X board */
+ /* Re-initialize DM910X board */
dmfe_init_dm910x(dev);
/* Disable WOL */
@@ -2196,7 +2196,7 @@
/* Description:
* when user used insmod to add module, system invoked init_module()
- * to initilize and register.
+ * to initialize and register.
*/
static int __init dmfe_init_module(void)
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d86e8f3..7f48e04 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -50,7 +50,7 @@
*
* ROADMAP
*
- * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_dev_initialize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 231dbd7..cb3c25f 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -1225,7 +1225,7 @@
/* Generate challenge data for shared key authentication. IEEE 802.11 specifies
- * that WEP algorithm is used for generating challange. This should be unique,
+ * that WEP algorithm is used for generating challenge. This should be unique,
* but otherwise there is not really need for randomness etc. Initialize WEP
* with pseudo random key and then use increasing IV to get unique challenge
* streams.
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 2f999fc..e9d9d62 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -1896,7 +1896,7 @@
/* Some SMP systems have reported number of odd errors with hostap_pci. fid
* register has changed values between consecutive reads for an unknown reason.
* This should really not happen, so more debugging is needed. This test
- * version is a big slower, but it will detect most of such register changes
+ * version is a bit slower, but it will detect most of such register changes
* and will try to get the correct fid eventually. */
#define EXTRA_FID_READ_TESTS
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index f511e70..75a80e46b 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1241,10 +1241,10 @@
};
/**
- * ccio_ioc_init - Initalize the I/O Controller
+ * ccio_ioc_init - Initialize the I/O Controller
* @ioc: The I/O Controller.
*
- * Initalize the I/O Controller which includes setting up the
+ * Initialize the I/O Controller which includes setting up the
* I/O Page Directory, the resource map, and initalizing the
* U2/Uturn chip into virtual mode.
*/
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index fa28d89..0c62fe3 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -231,7 +231,7 @@
sinfo->nskt = nr;
- /* Initiliaze processor specific parameters */
+ /* Initialize processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 08fa453..74e9d22 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -808,7 +808,7 @@
/**
* rio_std_route_get_entry - Read switch route table entry (port number)
- * assosiated with specified destID using standard registers defined in RIO
+ * associated with specified destID using standard registers defined in RIO
* specification rev.1.3
* @mport: Master port to issue transaction
* @destid: Destination ID of the device
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
index ff6fce6..e4de8f3 100644
--- a/drivers/rtc/rtc-fm3130.c
+++ b/drivers/rtc/rtc-fm3130.c
@@ -104,7 +104,7 @@
if (!fm3130->data_valid) {
/* We have invalid data in RTC, probably due
to battery faults or other problems. Return EIO
- for now, it will allow us to set data later insted
+ for now, it will allow us to set data later instead
of error during probing which disables device */
return -EIO;
}
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 789f62f..1146e35 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -461,7 +461,7 @@
* Clock precision adjustment support
*
* According to the RX8025 SA/NB application manual the frequency and
- * temperature charateristics can be approximated using the following
+ * temperature characteristics can be approximated using the following
* equation:
*
* df = a * (ut - t)**2
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 7f87979..0ec3da6 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9717,7 +9717,7 @@
asc_dvc->bug_fix_cntl = 0;
asc_dvc->pci_fix_asyn_xfer = 0;
asc_dvc->pci_fix_asyn_xfer_always = 0;
- /* asc_dvc->init_state initalized in AscInitGetConfig(). */
+ /* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
asc_dvc->is_in_int = 0;
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index f6fc4b7..5997e7c 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -615,7 +615,7 @@
* went empty and the next bit of data is copied from
* the SCSI fifo into the PCI fifo. It should only
* come on when both FIFOs (meaning the entire FIFO
- * chain) are emtpy. Since it can take up to 4 cycles
+ * chain) are empty. Since it can take up to 4 cycles
* for new data to be copied from the SCSI fifo into
* the PCI fifo, testing for FIFOEMP status for 4
* extra times gives the needed time for any
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index d01dcc6..7437461 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -588,7 +588,7 @@
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
- * Setup and initialize Central sequencers. Initialiaze the mode
+ * Setup and initialize Central sequencers. Initialize the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
@@ -782,7 +782,7 @@
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
- * (ENABLE SPINUP) primitive. Must be initilized to val - 1.
+ * (ENABLE SPINUP) primitive. Must be initialized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 3a7b3f8..d845506 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -335,7 +335,7 @@
{BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT},
};
- *npciids = sizeof(__pciids) / sizeof(__pciids[0]);
+ *npciids = ARRAY_SIZE(__pciids);
*pciids = __pciids;
}
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index 3516172..153cb2a 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -86,7 +86,7 @@
bfa_attach_fcs(bfa);
fcbuild_init();
- for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) {
mod = &fcs_modules[i];
if (mod->attach)
mod->attach(fcs);
@@ -102,7 +102,7 @@
int i;
struct bfa_fcs_mod_s *mod;
- for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) {
mod = &fcs_modules[i];
if (mod->modinit)
mod->modinit(fcs);
@@ -163,13 +163,11 @@
bfa_fcs_exit(struct bfa_fcs_s *fcs)
{
struct bfa_fcs_mod_s *mod;
- int nmods, i;
+ int i;
bfa_wc_init(&fcs->wc, bfa_fcs_exit_comp, fcs);
- nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]);
-
- for (i = 0; i < nmods; i++) {
+ for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) {
mod = &fcs_modules[i];
if (mod->modexit) {
diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c
index 687f3d6..3d2eac1 100644
--- a/drivers/scsi/bfa/bfa_ioim.c
+++ b/drivers/scsi/bfa/bfa_ioim.c
@@ -488,7 +488,7 @@
case BFA_IOIM_SM_ABORT:
/**
- * IO is alraedy being cleaned up implicitly
+ * IO is already being cleaned up implicitly
*/
ioim->io_cbfn = __bfa_cb_ioim_abort;
break;
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index 27cd619..e2720c8 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -789,7 +789,7 @@
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 44a0759..fe568ef 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2452,7 +2452,7 @@
* @fp: response frame, or error encoded in a pointer (timeout)
* @arg: pointer the the fcoe_ctlr structure
*
- * This handles MAC address managment for FCoE, then passes control on to
+ * This handles MAC address management for FCoE, then passes control on to
* the libfc FLOGI response handler.
*/
static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
@@ -2484,7 +2484,7 @@
* @fp: response frame, or error encoded in a pointer (timeout)
* @arg: pointer the the fcoe_ctlr structure
*
- * This handles MAC address managment for FCoE, then passes control on to
+ * This handles MAC address management for FCoE, then passes control on to
* the libfc LOGO response handler.
*/
static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 104e0fb..ca52bfa 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -219,8 +219,6 @@
*/
static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT;
-#define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0]))
-
/**
* fc_exch_name_lookup() - Lookup name by opcode
* @op: Opcode to be looked up
@@ -249,7 +247,7 @@
static const char *fc_exch_rctl_name(unsigned int op)
{
return fc_exch_name_lookup(op, fc_exch_rctl_names,
- FC_TABLE_SIZE(fc_exch_rctl_names));
+ ARRAY_SIZE(fc_exch_rctl_names));
}
/**
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 79c9e3c..ef32b06 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -32,11 +32,11 @@
* invalid SID. We also need to ensure that states don't change unexpectedly
* while processing another state.
*
- * HEIRARCHY
+ * HIERARCHY
*
- * The following heirarchy defines the locking rules. A greater lock
+ * The following hierarchy defines the locking rules. A greater lock
* may be held before acquiring a lesser lock, but a lesser lock should never
- * be held while attempting to acquire a greater lock. Here is the heirarchy-
+ * be held while attempting to acquire a greater lock. Here is the hierarchy-
*
* lport > disc, lport > rport, disc > rport
*
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 39e440f..2aa5993 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -34,7 +34,7 @@
* The rport should never hold the rport mutex and then attempt to acquire
* either the lport or disc mutexes. The rport's mutex is considered lesser
* than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
- * more comments on the heirarchy.
+ * more comments on the hierarchy.
*
* The locking strategy is similar to the lport's strategy. The lock protects
* the rport's states and is held and released by the entry points to the rport
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index b4afe43..41c29a8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -474,7 +474,7 @@
* @shost_recovery: host reset in progress
* @ioc_reset_in_progress_lock:
* @ioc_link_reset_in_progress: phy/hard reset in progress
- * @ignore_loginfos: ignore loginfos during task managment
+ * @ignore_loginfos: ignore loginfos during task management
* @remove_host: flag for when driver unloads, to avoid sending dev resets
* @wait_for_port_enable_to_complete:
* @msix_enable: flag indicating msix is enabled
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index c5ff26a..06d645a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2979,7 +2979,7 @@
/* host recovery or link resets sent via IOCTLs */
if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
return SCSI_MLQUEUE_HOST_BUSY;
- /* device busy with task managment */
+ /* device busy with task management */
else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
return SCSI_MLQUEUE_DEVICE_BUSY;
/* device has been deleted */
@@ -6845,7 +6845,7 @@
/* queuecommand callback hander */
scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
- /* task managment callback handler */
+ /* task management callback handler */
tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
/* base internal commands callback handler */
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 5ff8261..e81efac 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1082,7 +1082,7 @@
}
/**
- * pm8001_chip_iounmap - which maped when initilized.
+ * pm8001_chip_iounmap - which maped when initialized.
* @pm8001_ha: our hba card information
*/
static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
@@ -4152,7 +4152,7 @@
}
/**
- * pm8001_chip_ssp_tm_req - built the task managment command.
+ * pm8001_chip_ssp_tm_req - built the task management command.
* @pm8001_ha: our hba card information.
* @ccb: the ccb information.
* @tmf: task management function.
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8ef9453..782b30d 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1129,7 +1129,7 @@
cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32(
MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
fcp_cmnd->task_attribute = 0;
- fcp_cmnd->task_managment = 0;
+ fcp_cmnd->task_management = 0;
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index f8f99a5..1b44d01 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -832,7 +832,7 @@
struct scsi_lun lun;
uint8_t crn;
uint8_t task_attribute;
- uint8_t task_managment;
+ uint8_t task_management;
uint8_t additional_cdb_len;
uint8_t cdb[260]; /* 256 for CDB len and 4 for FCP_DL */
};
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 5510df8..cd30432 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -183,7 +183,7 @@
**/
static int qla4xxx_init_local_data(struct scsi_qla_host *ha)
{
- /* Initilize aen queue */
+ /* Initialize aen queue */
ha->aen_q_count = MAX_AEN_ENTRIES;
return qla4xxx_get_firmware_status(ha);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 0681378..edb6b36 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -965,7 +965,7 @@
/*
* Note: in the target show function we recognize when the remote
- * port is in the heirarchy and do not allow the driver to get
+ * port is in the hierarchy and do not allow the driver to get
* involved in sysfs functions. The driver only gets involved if
* it's the "old" style that doesn't use rports.
*/
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd..768612f 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -2649,7 +2649,7 @@
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
@@ -2728,7 +2728,7 @@
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
up->mrblr = 1;
@@ -2886,7 +2886,7 @@
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cd6cf57..6016179 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -852,7 +852,7 @@
*/
cpm_set_smc_fcr(up);
- /* Using idle charater time requires some additional tuning. */
+ /* Using idle character time requires some additional tuning. */
out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
out_be16(&up->smc_brklen, 0);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa9..e65b0d9 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
- /* wait for transmitter to become emtpy */
+ /* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
cpu_relax();
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0c..7e5e5ef 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 681419d..251caa0 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008 Pavel Machek <pavel@suse.cz>
+ * Copyright 2008 Pavel Machek <pavel@ucw.cz>
*
* Distribute under GPLv2.
*
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 162c95a..89d260d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -2,7 +2,7 @@
* cdc-acm.c
*
* Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de>
- * Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com>
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2004 Oliver Neukum <oliver@neukum.name>
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 2250095..84f9e52 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -2,7 +2,7 @@
* usblp.c
*
* Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
- * Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
# Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 4f2cbdc..a42ef38 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -125,7 +125,7 @@
/*
* Flush all transmitted packets from BDs
* This routine is called when disabling the USB port to flush all
- * transmissions that are allready scheduled in the BDs
+ * transmissions that are already scheduled in the BDs
*/
void fhci_flush_all_transmissions(struct fhci_usb *usb)
{
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index cdbe8bf..e8a65ce 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -261,7 +261,7 @@
spin_lock_init(&priv->lock);
- /* priv->termios is left uninitalized until port opening */
+ /* priv->termios is left uninitialized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index eab86e4..2054d4e 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -26,7 +26,7 @@
* the one that requires (phase B, wusbhc_b_{create,destroy}).
*
* This is so because usb_add_hcd() will start the HC, and thus, all
- * the HC specific stuff has to be already initialiazed (like sysfs
+ * the HC specific stuff has to be already initialized (like sysfs
* thingies).
*/
#include <linux/device.h>
diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c
index 90accdd..a005d2a 100644
--- a/drivers/uwb/wlp/wss-lc.c
+++ b/drivers/uwb/wlp/wss-lc.c
@@ -180,7 +180,7 @@
* If memory was allocated for the kobject's name then it will
* be freed by the kobject system during this time.
*
- * The EDA cache is removed and reinitilized when the WSS is removed. We
+ * The EDA cache is removed and reinitialized when the WSS is removed. We
* thus loose knowledge of members of this WSS at that time and need not do
* it here.
*/
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index 7571bc2..d2f5901 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -2,7 +2,7 @@
* Backlight control code for Sharp Zaurus SL-5500
*
* Copyright 2005 John Lenz <lenz@cs.wisc.edu>
- * Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-)
+ * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-)
* GPL v2
*
* This driver assumes single CPU. That's okay, because collie is
@@ -246,6 +246,6 @@
module_init(locomolcd_init);
module_exit(locomolcd_exit);
-MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>");
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>");
MODULE_DESCRIPTION("Collie LCD driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index d8345fc..6b19136 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -432,7 +432,7 @@
u32 loops;
u32 ret;
- /* Initalize Carmine */
+ /* Initialize Carmine */
/* Sets internal clock */
c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE,
CARMINE_DFLT_IP_CLOCK_ENABLE);
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index 1b3b1c7..aba7686 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -305,7 +305,7 @@
TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG);
TGA_WRITE_REG(par, vtimings, TGA_VERT_REG);
- /* Initalise RAMDAC. */
+ /* Initialise RAMDAC. */
if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) {
/* Init BT485 RAMDAC registers. */
diff --git a/fs/Kconfig b/fs/Kconfig
index 5f85b59..3d18530 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -64,7 +64,7 @@
source "fs/fuse/Kconfig"
config CUSE
- tristate "Character device in Userpace support"
+ tristate "Character device in Userspace support"
depends on FUSE_FS
help
This FUSE extension allows character devices to be
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 34ddda8..dc39d28 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -436,7 +436,7 @@
init_once);
if (befs_inode_cachep == NULL) {
printk(KERN_ERR "befs_init_inodecache: "
- "Couldn't initalize inode slabcache\n");
+ "Couldn't initialize inode slabcache\n");
return -ENOMEM;
}
diff --git a/fs/compat.c b/fs/compat.c
index 6490d21..c6fda9a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -8,7 +8,7 @@
* Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 2001,2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2003 Pavel Machek (pavel@suse.cz)
+ * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 641640d..5ead376 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -4,7 +4,7 @@
* Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 2001,2002 Andi Kleen, SuSE Labs
- * Copyright (C) 2003 Pavel Machek (pavel@suse.cz)
+ * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz)
*
* These routines maintain argument size conversion between 32bit and 64bit
* ioctls.
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 1cc0876..a2e3b56 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -762,7 +762,7 @@
/**
* ecryptfs_init_crypt_ctx
- * @crypt_stat: Uninitilized crypt stats structure
+ * @crypt_stat: Uninitialized crypt stats structure
*
* Initialize the crypto context.
*
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 377309c..bf029c7 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2937,7 +2937,7 @@
* One of more index blocks maybe needed if the extent tree grow after
* the unintialized extent split. To prevent ENOSPC occur at the IO
* complete, we need to split the uninitialized extent before DIO submit
- * the IO. The uninitilized extent called at this time will be split
+ * the IO. The uninitialized extent called at this time will be split
* into three uninitialized extent(at most). After IO complete, the part
* being filled will be convert to initialized by the end_io callback function
* via ext4_convert_unwritten_extents().
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 12b3bc0..0e83dfd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2704,7 +2704,7 @@
/*
- * Check quota and mark choosed space (ac->ac_b_ex) non-free in bitmaps
+ * Check quota and mark chosen space (ac->ac_b_ex) non-free in bitmaps
* Returns 0 if success or error code
*/
static noinline_for_stack int
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4e8983a..e72d323 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3010,7 +3010,7 @@
ext4_ext_init(sb);
err = ext4_mb_init(sb, needs_recovery);
if (err) {
- ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)",
+ ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
goto failed_mount4;
}
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 1e8af93..5132c99 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -135,7 +135,7 @@
}
/**
- * vxfs_read_super - read superblock into memory and initalize filesystem
+ * vxfs_read_super - read superblock into memory and initialize filesystem
* @sbp: VFS superblock (to fill)
* @dp: fs private mount data
* @silent: do not complain loudly when sth is wrong
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index fa33851..1e634de 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -728,8 +728,8 @@
out_bdi:
/* 23/12/1998 Marcin Dalecki <dalecki@cs.net.pl>:
*
- * The previously used put_filp(ncp_filp); was bogous, since
- * it doesn't proper unlocking.
+ * The previously used put_filp(ncp_filp); was bogus, since
+ * it doesn't perform proper unlocking.
*/
fput(ncp_filp);
out:
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 0cd24cf..5efdd37 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -419,7 +419,7 @@
static int debug_buffer_release(struct inode *inode, struct file *file)
{
- struct debug_buffer *db = (struct debug_buffer *)file->private_data;
+ struct debug_buffer *db = file->private_data;
if (db)
kfree(db->buf);
@@ -715,7 +715,7 @@
goto bail;
}
- seq = (struct seq_file *) file->private_data;
+ seq = file->private_data;
seq->private = dl;
dlm_grab(dlm);
@@ -731,7 +731,7 @@
static int debug_lockres_release(struct inode *inode, struct file *file)
{
- struct seq_file *seq = (struct seq_file *)file->private_data;
+ struct seq_file *seq = file->private_data;
struct debug_lockres *dl = (struct debug_lockres *)seq->private;
if (dl->dl_res)
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index b83d610..bef34d0 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -182,8 +182,7 @@
{
int level, status;
struct dlmfs_inode_private *ip = DLMFS_I(inode);
- struct dlmfs_filp_private *fp =
- (struct dlmfs_filp_private *) file->private_data;
+ struct dlmfs_filp_private *fp = file->private_data;
if (S_ISDIR(inode->i_mode))
BUG();
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 39eb16a..5e02a89 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2966,7 +2966,7 @@
static int ocfs2_dlm_debug_release(struct inode *inode, struct file *file)
{
- struct seq_file *seq = (struct seq_file *) file->private_data;
+ struct seq_file *seq = file->private_data;
struct ocfs2_dlm_seq_priv *priv = seq->private;
struct ocfs2_lock_res *res = &priv->p_iter_res;
@@ -3000,7 +3000,7 @@
goto out;
}
- seq = (struct seq_file *) file->private_data;
+ seq = file->private_data;
seq->private = priv;
ocfs2_add_lockres_tracking(&priv->p_iter_res,
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0eaa929..03a799f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -2472,7 +2472,7 @@
kfree(osb->slot_recovery_generations);
/* FIXME
* This belongs in journal shutdown, but because we have to
- * allocate osb->journal at the start of ocfs2_initalize_osb(),
+ * allocate osb->journal at the start of ocfs2_initialize_osb(),
* we free it here.
*/
kfree(osb->journal);
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 0f22fda..29db72203 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1221,7 +1221,7 @@
inode_set_bytes(inode,
to_real_used_space(inode, inode->i_blocks,
SD_V2_SIZE));
- /* read persistent inode attributes from sd and initalise
+ /* read persistent inode attributes from sd and initialise
generic inode flags from them */
REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd);
sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode);
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
index 595ce49..ec0dad5 100644
--- a/include/linux/fscache.h
+++ b/include/linux/fscache.h
@@ -85,7 +85,7 @@
/* get an index key
* - should store the key data in the buffer
- * - should return the amount of amount stored
+ * - should return the amount of data stored
* - not permitted to return an error
* - the netfs data from the cookie being used as the source is
* presented
@@ -454,6 +454,7 @@
* @cookie: The cookie representing the cache object
* @mapping: The netfs inode mapping to which the pages will be attached
* @pages: A list of potential netfs pages to be filled
+ * @nr_pages: Number of pages to be read and/or allocated
* @end_io_func: The callback to invoke when and if each page is filled
* @context: An arbitrary piece of data to pass on to end_io_func()
* @gfp: The conditions under which memory allocation should be made
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 7b02aa5..072fe8c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -458,7 +458,7 @@
IDE_DFLAG_DOORLOCKING = (1 << 15),
/* disallow DMA */
IDE_DFLAG_NODMA = (1 << 16),
- /* powermanagment told us not to do anything, so sleep nicely */
+ /* powermanagement told us not to do anything, so sleep nicely */
IDE_DFLAG_BLOCKED = (1 << 17),
/* sleeping & sleep field valid */
IDE_DFLAG_SLEEPING = (1 << 18),
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 85c812d..9d8f080 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -233,7 +233,7 @@
MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
};
-/* SR-IOV virtual function managment section */
+/* SR-IOV virtual function management section */
enum {
IFLA_VF_INFO_UNSPEC,
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 0874ab5..edb9231 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -185,7 +185,7 @@
jint32_t hdr_crc;
jint32_t ino; /* inode number */
jint32_t xid; /* XATTR identifier number */
- jint32_t xseqno; /* xref sequencial number */
+ jint32_t xseqno; /* xref sequential number */
jint32_t node_crc;
} __attribute__((packed));
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 8317ec4..bd8501a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -728,12 +728,6 @@
#endif /* __KERNEL__ */
-#ifndef __EXPORTED_HEADERS__
-#ifndef __KERNEL__
-#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders
-#endif /* __KERNEL__ */
-#endif /* __EXPORTED_HEADERS__ */
-
#define SI_LOAD_SHIFT 16
struct sysinfo {
long uptime; /* Seconds since boot */
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index de48d16..78fbf24 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -262,7 +262,7 @@
* @lc: the lru cache to operate on
*
* Note that the reference counts and order on the active and lru lists may
- * still change. Returns true if we aquired the lock.
+ * still change. Returns true if we acquired the lock.
*/
static inline int lc_try_lock(struct lru_cache *lc)
{
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b21e405..50d09aa 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -775,7 +775,7 @@
/*
* This is the first field of the "visible" part of this structure
* (i.e. as seen by users in the "Space.c" file). It is the name
- * the interface.
+ * of the interface.
*/
char name[IFNAMSIZ];
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 3b603f4..ba39416 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -360,7 +360,7 @@
/* the spot for the super in versions 3.5 - 3.5.10 (inclusive) */
#define REISERFS_OLD_DISK_OFFSET_IN_BYTES (8 * 1024)
-// reiserfs internal error code (used by search_by_key adn fix_nodes))
+/* reiserfs internal error code (used by search_by_key and fix_nodes)) */
#define CARRY_ON 0
#define REPEAT_SEARCH -1
#define IO_ERROR -2
diff --git a/include/linux/types.h b/include/linux/types.h
index 23d237a..331d8ba 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -8,7 +8,10 @@
#define DECLARE_BITMAP(name,bits) \
unsigned long name[BITS_TO_LONGS(bits)]
-
+#else
+#ifndef __EXPORTED_HEADERS__
+#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
+#endif /* __EXPORTED_HEADERS__ */
#endif
#include <linux/posix_types.h>
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 02b9611..7cb37d8 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -105,7 +105,7 @@
/* for custom sched domain */
int relax_domain_level;
- /* used for walking a cpuset heirarchy */
+ /* used for walking a cpuset hierarchy */
struct list_head stack_list;
};
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 8bc5eef..51d14fe8 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -6,7 +6,7 @@
* Copyright (C) 2000-2001 VERITAS Software Corporation.
* Copyright (C) 2002-2004 Timesys Corporation
* Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
- * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
* Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
* Copyright (C) 2005-2009 Wind River Systems, Inc.
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index e8fd686..6e81fd5 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -6,7 +6,7 @@
* Copyright (C) 2000-2001 VERITAS Software Corporation.
* Copyright (C) 2002-2004 Timesys Corporation
* Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
- * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
* Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
* Copyright (C) 2005-2009 Wind River Systems, Inc.
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index aa9e916..6b202e7 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -3,7 +3,7 @@
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
- * Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz>
* Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
*
* This file is released under the GPLv2.
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 25ce010..f6cd6fa 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -3,7 +3,7 @@
*
* This file provides system snapshot/restore functionality for swsusp.
*
- * Copyright (C) 1998-2005 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 1998-2005 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
*
* This file is released under the GPLv2.
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index b0bb217..48a0aa9 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -4,7 +4,7 @@
* This file provides functions for reading the suspend image from
* and writing it to a swap partition.
*
- * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
*
* This file is released under the GPLv2.
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index b3bafd5..48b2761 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -188,7 +188,7 @@
/*
* Setup the next period for devices, which do not have
* periodic mode. We read dev->next_event first and add to it
- * when the event alrady expired. clockevents_program_event()
+ * when the event already expired. clockevents_program_event()
* sets dev->next_event only when the event is really
* programmed to the device.
*/
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e722e9d..dfdc034 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -937,7 +937,7 @@
Provide fault-injection capability for disk IO.
config FAIL_IO_TIMEOUT
- bool "Faul-injection capability for faking disk interrupts"
+ bool "Fault-injection capability for faking disk interrupts"
depends on FAULT_INJECTION && BLOCK
help
Provide fault-injection capability on end IO handling. This
diff --git a/lib/devres.c b/lib/devres.c
index 4936860..6efddf5 100644
--- a/lib/devres.c
+++ b/lib/devres.c
@@ -328,7 +328,7 @@
* @pdev: PCI device to map IO resources for
* @mask: Mask of BARs to unmap and release
*
- * Unamp and release regions specified by @mask.
+ * Unmap and release regions specified by @mask.
*/
void pcim_iounmap_regions(struct pci_dev *pdev, u16 mask)
{
diff --git a/lib/random32.c b/lib/random32.c
index 870dc3f..fc3545a 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -127,7 +127,7 @@
/*
* Generate better values after random number generator
- * is fully initalized.
+ * is fully initialized.
*/
static int __init random32_reseed(void)
{
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 6fb8901..4dc8805 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -201,7 +201,7 @@
int offset, end;
if (fq->q.last_in & INET_FRAG_COMPLETE) {
- pr_debug("Allready completed\n");
+ pr_debug("Already completed\n");
goto err;
}
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 94a4521..9323f89 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -11,7 +11,7 @@
* Changes:
* Martin Hamilton : fixed the terrible locking bugs
* *lock(tbl->lock) ==> *lock(&tbl->lock)
- * Wensong Zhang : fixed the uninitilized tbl->lock bug
+ * Wensong Zhang : fixed the uninitialized tbl->lock bug
* Wensong Zhang : added doing full expiration check to
* collect stale entries of 24+ hours when
* no partial expire check in a half hour
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 535dc2b..dbeed8e 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -386,7 +386,7 @@
ip_vs_addr_copy(dest->af, &en->addr, daddr);
en->lastuse = jiffies;
- /* initilize its dest set */
+ /* initialize its dest set */
atomic_set(&(en->set.size), 0);
INIT_LIST_HEAD(&en->set.list);
rwlock_init(&en->set.lock);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index e41feff..0b85e52 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -172,7 +172,7 @@
asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
(unsigned long)sp->autoclose * HZ;
- /* Initilizes the timers */
+ /* Initializes the timers */
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
setup_timer(&asoc->timers[i], sctp_timer_events[i],
(unsigned long)asoc);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 1827498..0f41b05 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1162,7 +1162,7 @@
/* Set the pressure threshold to be a fraction of global memory that
* is up to 1/2 at 256 MB, decreasing toward zero with the amount of
* memory, with a floor of 128 pages.
- * Note this initalizes the data in sctpv6_prot too
+ * Note this initializes the data in sctpv6_prot too
* Unabashedly stolen from tcp_init
*/
nr_pages = totalram_pages - totalhigh_pages;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0f2fc48..276bdc7 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -3227,7 +3227,7 @@
cred = (struct cred *) current->cred;
cred->security = &smack_known_floor.smk_known;
- /* initilize the smack_know_list */
+ /* initialize the smack_know_list */
init_smack_know_list();
/*
* Initialize locks
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 84714a6..c290cee 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -155,7 +155,7 @@
select SND_AC97_CODEC
help
Say Y here to include support for the
- opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403
+ opb_ac97_controller_ref_v1_00_a ip core found in Xilinx's ML403
reference design.
To compile this driver as a module, choose M here: the module
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 6d943f6..2870a4f 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -1055,7 +1055,7 @@
spin_lock_irq(&trident->reg_lock);
- // Initilize the channel and set channel Mode
+ // Initialize the channel and set channel Mode
outb(0, TRID_REG(trident, LEGACY_DMAR15));
// Set DMA channel operation mode register
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 6a2764e..3a50106 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -46,7 +46,7 @@
};
/**
- * mpc8610_hpcd_machine_probe: initalize the board
+ * mpc8610_hpcd_machine_probe: initialize the board
*
* This function is called when platform_device_add() is called. It is used
* to initialize the board-specific hardware.
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index 80b4fee..4fd13d0 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -23,7 +23,7 @@
* between pcm data and GPIO status data changes. Our FIQ handler is not
* able to handle this, hence this driver only works with 48000Hz sampling
* rate.
- * Reading and writing AC97 registers is another challange. The core
+ * Reading and writing AC97 registers is another challenge. The core
* provides us status bits when the read register is updated with *another*
* value. When we read the same register two times (and the register still
* contains the same value) these status bits are not set. We work
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 998569d..e048e09 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1307,7 +1307,7 @@
}
/*
- * Attempt to initialise any uninitalised cards. Must be called with
+ * Attempt to initialise any uninitialised cards. Must be called with
* client_mutex.
*/
static void snd_soc_instantiate_cards(void)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 4568298..3634ced 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -636,7 +636,7 @@
min_datainterval = min(min_datainterval, fp->datainterval);
}
if (min_datainterval == 0xff) {
- hwc_debug(" --> get emtpy\n");
+ hwc_debug(" --> get empty\n");
it->empty = 1;
return -EINVAL;
}