m68k/scsi: a3000 - Kill ugly DMA() macro
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index bc6eb69..ae9b25a3 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -22,16 +22,15 @@
#include <linux/stat.h>
-#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base))
-
static struct Scsi_Host *a3000_host = NULL;
static int a3000_release(struct Scsi_Host *instance);
static irqreturn_t a3000_intr(int irq, void *dummy)
{
+ a3000_scsiregs *regs = (a3000_scsiregs *)(a3000_host->base);
+ unsigned int status = regs->ISTR;
unsigned long flags;
- unsigned int status = DMA(a3000_host)->ISTR;
if (!(status & ISTR_INT_P))
return IRQ_NONE;
@@ -48,6 +47,7 @@
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct WD33C93_hostdata *hdata = shost_priv(a3000_host);
+ a3000_scsiregs *regs = (a3000_scsiregs *)(a3000_host->base);
unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
@@ -84,10 +84,10 @@
/* remember direction */
hdata->dma_dir = dir_in;
- DMA(a3000_host)->CNTR = cntr;
+ regs->CNTR = cntr;
/* setup DMA *physical* address */
- DMA(a3000_host)->ACR = addr;
+ regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
@@ -99,7 +99,7 @@
/* start DMA */
mb(); /* make sure setup is completed */
- DMA(a3000_host)->ST_DMA = 1;
+ regs->ST_DMA = 1;
mb(); /* make sure DMA has started before next IO */
/* return success */
@@ -110,6 +110,7 @@
int status)
{
struct WD33C93_hostdata *hdata = shost_priv(instance);
+ a3000_scsiregs *regs = (a3000_scsiregs *)(instance->base);
/* disable SCSI interrupts */
unsigned short cntr = CNTR_PDMD;
@@ -117,14 +118,14 @@
if (!hdata->dma_dir)
cntr |= CNTR_DDIR;
- DMA(instance)->CNTR = cntr;
+ regs->CNTR = cntr;
mb(); /* make sure CNTR is updated before next IO */
/* flush if we were reading */
if (hdata->dma_dir) {
- DMA(instance)->FLUSH = 1;
+ regs->FLUSH = 1;
mb(); /* don't allow prefetch */
- while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
+ while (!(regs->ISTR & ISTR_FE_FLG))
barrier();
mb(); /* no IO until FLUSH is done */
}
@@ -133,14 +134,14 @@
/* I think that this CINT is only necessary if you are
* using the terminal count features. HM 7 Mar 1994
*/
- DMA(instance)->CINT = 1;
+ regs->CINT = 1;
/* stop DMA */
- DMA(instance)->SP_DMA = 1;
+ regs->SP_DMA = 1;
mb(); /* make sure DMA is stopped before next IO */
/* restore the CONTROL bits (minus the direction flag) */
- DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
mb(); /* make sure CNTR is updated before next IO */
/* copy from a bounce buffer, if necessary */
@@ -163,7 +164,8 @@
static int __init a3000_detect(struct scsi_host_template *tpnt)
{
- wd33c93_regs regs;
+ wd33c93_regs wdregs;
+ a3000_scsiregs *regs;
struct WD33C93_hostdata *hdata;
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
@@ -180,18 +182,20 @@
a3000_host->base = ZTWO_VADDR(0xDD0000);
a3000_host->irq = IRQ_AMIGA_PORTS;
- DMA(a3000_host)->DAWR = DAWR_A3000;
- regs.SASR = &(DMA(a3000_host)->SASR);
- regs.SCMD = &(DMA(a3000_host)->SCMD);
+ regs = (a3000_scsiregs *)(a3000_host->base);
+ regs->DAWR = DAWR_A3000;
+ wdregs.SASR = ®s->SASR;
+ wdregs.SCMD = ®s->SCMD;
hdata = shost_priv(a3000_host);
hdata->no_sync = 0xff;
hdata->fast = 0;
hdata->dma_mode = CTRL_DMA;
- wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
+ wd33c93_init(a3000_host, wdregs, dma_setup, dma_stop,
+ WD33C93_FS_12_15);
if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
a3000_intr))
goto fail_irq;
- DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
return 1;
@@ -239,7 +243,9 @@
static int a3000_release(struct Scsi_Host *instance)
{
- DMA(instance)->CNTR = 0;
+ a3000_scsiregs *regs = (a3000_scsiregs *)(instance->base);
+
+ regs->CNTR = 0;
release_mem_region(0xDD0000, 256);
free_irq(IRQ_AMIGA_PORTS, a3000_intr);
return 1;