| /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/smsc911x.h> |
| #include <linux/usb/msm_hsusb.h> |
| #include <linux/clkdev.h> |
| #include <linux/memblock.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/memory.h> |
| #include <asm/setup.h> |
| |
| #include <mach/clk.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/dma.h> |
| |
| #include <mach/vreg.h> |
| #include "devices.h" |
| #include "gpiomux.h" |
| #include "proc_comm.h" |
| #include "common.h" |
| |
| static void __init msm7x30_fixup(struct tag *tag, char **cmdline, |
| struct meminfo *mi) |
| { |
| for (; tag->hdr.size; tag = tag_next(tag)) |
| if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { |
| tag->u.mem.start = 0; |
| tag->u.mem.size += SZ_2M; |
| } |
| } |
| |
| static void __init msm7x30_reserve(void) |
| { |
| memblock_remove(0x0, SZ_2M); |
| } |
| |
| static int hsusb_phy_init_seq[] = { |
| 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ |
| 0x02, 0x36, /* Disable CDR Auto Reset feature */ |
| -1 |
| }; |
| |
| static int hsusb_link_clk_reset(struct clk *link_clk, bool assert) |
| { |
| int ret; |
| |
| if (assert) { |
| ret = clk_reset(link_clk, CLK_RESET_ASSERT); |
| if (ret) |
| pr_err("usb hs_clk assert failed\n"); |
| } else { |
| ret = clk_reset(link_clk, CLK_RESET_DEASSERT); |
| if (ret) |
| pr_err("usb hs_clk deassert failed\n"); |
| } |
| return ret; |
| } |
| |
| static int hsusb_phy_clk_reset(struct clk *phy_clk) |
| { |
| int ret; |
| |
| ret = clk_reset(phy_clk, CLK_RESET_ASSERT); |
| if (ret) { |
| pr_err("usb phy clk assert failed\n"); |
| return ret; |
| } |
| usleep_range(10000, 12000); |
| ret = clk_reset(phy_clk, CLK_RESET_DEASSERT); |
| if (ret) |
| pr_err("usb phy clk deassert failed\n"); |
| return ret; |
| } |
| |
| static struct msm_otg_platform_data msm_otg_pdata = { |
| .phy_init_seq = hsusb_phy_init_seq, |
| .mode = USB_DR_MODE_PERIPHERAL, |
| .otg_control = OTG_PHY_CONTROL, |
| .link_clk_reset = hsusb_link_clk_reset, |
| .phy_clk_reset = hsusb_phy_clk_reset, |
| }; |
| |
| struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { |
| #ifdef CONFIG_SERIAL_MSM_CONSOLE |
| [49] = { /* UART2 RFR */ |
| .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | |
| GPIOMUX_FUNC_2 | GPIOMUX_VALID, |
| }, |
| [50] = { /* UART2 CTS */ |
| .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | |
| GPIOMUX_FUNC_2 | GPIOMUX_VALID, |
| }, |
| [51] = { /* UART2 RX */ |
| .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | |
| GPIOMUX_FUNC_2 | GPIOMUX_VALID, |
| }, |
| [52] = { /* UART2 TX */ |
| .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | |
| GPIOMUX_FUNC_2 | GPIOMUX_VALID, |
| }, |
| #endif |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &msm_clock_7x30, |
| &msm_device_gpio_7x30, |
| #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) |
| &msm_device_uart2, |
| #endif |
| &msm_device_smd, |
| &msm_device_otg, |
| &msm_device_hsusb, |
| &msm_device_hsusb_host, |
| }; |
| |
| static void __init msm7x30_init_irq(void) |
| { |
| msm_init_irq(); |
| } |
| |
| static void __init msm7x30_init(void) |
| { |
| msm_device_otg.dev.platform_data = &msm_otg_pdata; |
| msm_device_hsusb.dev.parent = &msm_device_otg.dev; |
| msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; |
| |
| platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| static void __init msm7x30_map_io(void) |
| { |
| msm_map_msm7x30_io(); |
| } |
| |
| static void __init msm7x30_init_late(void) |
| { |
| smd_debugfs_init(); |
| } |
| |
| MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") |
| .atag_offset = 0x100, |
| .fixup = msm7x30_fixup, |
| .reserve = msm7x30_reserve, |
| .map_io = msm7x30_map_io, |
| .init_irq = msm7x30_init_irq, |
| .init_machine = msm7x30_init, |
| .init_late = msm7x30_init_late, |
| .init_time = msm7x30_timer_init, |
| MACHINE_END |
| |
| MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") |
| .atag_offset = 0x100, |
| .fixup = msm7x30_fixup, |
| .reserve = msm7x30_reserve, |
| .map_io = msm7x30_map_io, |
| .init_irq = msm7x30_init_irq, |
| .init_machine = msm7x30_init, |
| .init_late = msm7x30_init_late, |
| .init_time = msm7x30_timer_init, |
| MACHINE_END |
| |
| MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") |
| .atag_offset = 0x100, |
| .fixup = msm7x30_fixup, |
| .reserve = msm7x30_reserve, |
| .map_io = msm7x30_map_io, |
| .init_irq = msm7x30_init_irq, |
| .init_machine = msm7x30_init, |
| .init_late = msm7x30_init_late, |
| .init_time = msm7x30_timer_init, |
| MACHINE_END |