watchdog: sp805: replace readl/writel with lighter _relaxed variants
readl/writel versions for ARM contain memory barrier instruction for
synchronizing DMA buffers. These are not required at least on this
module. So use lighter _relaxed variants.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 3e4edda..6e75157 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -113,10 +113,10 @@
rate = clk_get_rate(wdt->clk);
spin_lock(&wdt->lock);
- load = readl(wdt->base + WDTVALUE);
+ load = readl_relaxed(wdt->base + WDTVALUE);
/*If the interrupt is inactive then time left is WDTValue + WDTLoad. */
- if (!(readl(wdt->base + WDTRIS) & INT_MASK))
+ if (!(readl_relaxed(wdt->base + WDTRIS) & INT_MASK))
load += wdt->load_val + 1;
spin_unlock(&wdt->lock);
@@ -128,14 +128,14 @@
{
spin_lock(&wdt->lock);
- writel(UNLOCK, wdt->base + WDTLOCK);
- writel(wdt->load_val, wdt->base + WDTLOAD);
- writel(INT_MASK, wdt->base + WDTINTCLR);
- writel(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
- writel(LOCK, wdt->base + WDTLOCK);
+ writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
+ writel_relaxed(wdt->load_val, wdt->base + WDTLOAD);
+ writel_relaxed(INT_MASK, wdt->base + WDTINTCLR);
+ writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
+ writel_relaxed(LOCK, wdt->base + WDTLOCK);
/* Flush posted writes. */
- readl(wdt->base + WDTLOCK);
+ readl_relaxed(wdt->base + WDTLOCK);
spin_unlock(&wdt->lock);
}
@@ -144,12 +144,12 @@
{
spin_lock(&wdt->lock);
- writel(UNLOCK, wdt->base + WDTLOCK);
- writel(0, wdt->base + WDTCONTROL);
- writel(LOCK, wdt->base + WDTLOCK);
+ writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
+ writel_relaxed(0, wdt->base + WDTCONTROL);
+ writel_relaxed(LOCK, wdt->base + WDTLOCK);
/* Flush posted writes. */
- readl(wdt->base + WDTLOCK);
+ readl_relaxed(wdt->base + WDTLOCK);
spin_unlock(&wdt->lock);
}