[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.
This target produces a flat binary rather than an ELF file,
fixes the entry point at the beginning of the image, and takes
a complete device tree with no fixups needed.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index a31d4e1..7dcd9e9 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,6 +40,7 @@
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
zlib := inffast.c inflate.c inftrees.c
@@ -64,7 +65,8 @@
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
fixed-head.S ep88xc.c ep405.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c
+ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+ virtex405-head.S
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -307,6 +309,12 @@
$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+
$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
new file mode 100644
index 0000000..86cd285
--- /dev/null
+++ b/arch/powerpc/boot/simpleboot.c
@@ -0,0 +1,84 @@
+/*
+ * The simple platform -- for booting when firmware doesn't supply a device
+ * tree or any platform configuration information.
+ * All data is extracted from an embedded device tree
+ * blob.
+ *
+ * Authors: Scott Wood <scottwood@freescale.com>
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "io.h"
+#include "stdio.h"
+#include "libfdt/libfdt.h"
+
+BSS_STACK(4*1024);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ const u32 *na, *ns, *reg, *timebase;
+ u64 memsize64;
+ int node, size, i;
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ /* Find the #address-cells and #size-cells properties */
+ node = fdt_path_offset(_dtb_start, "/");
+ if (node < 0)
+ fatal("Cannot find root node\n");
+ na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
+ if (!na || (size != 4))
+ fatal("Cannot find #address-cells property");
+ ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
+ if (!ns || (size != 4))
+ fatal("Cannot find #size-cells property");
+
+ /* Find the memory range */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "memory", sizeof("memory"));
+ if (node < 0)
+ fatal("Cannot find memory node\n");
+ reg = fdt_getprop(_dtb_start, node, "reg", &size);
+ if (size < (*na+*ns) * sizeof(u32))
+ fatal("cannot get memory range\n");
+
+ /* Only interested in memory based at 0 */
+ for (i = 0; i < *na; i++)
+ if (*reg++ != 0)
+ fatal("Memory range is not based at address 0\n");
+
+ /* get the memsize and trucate it to under 4G on 32 bit machines */
+ memsize64 = 0;
+ for (i = 0; i < *ns; i++)
+ memsize64 = (memsize64 << 32) | *reg++;
+ if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
+ memsize64 = 0xffffffff;
+
+ /* finally, setup the timebase */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ /* Now we have the memory size; initialize the heap */
+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
+
+ /* prepare the device tree and find the console */
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S
new file mode 100644
index 0000000..3edb13f
--- /dev/null
+++ b/arch/powerpc/boot/virtex405-head.S
@@ -0,0 +1,30 @@
+#include "ppc_asm.h"
+
+ .text
+ .global _zimage_start
+_zimage_start:
+
+ /* PPC errata 213: needed by Virtex-4 FX */
+ mfccr0 0
+ oris 0,0,0x50000000@h
+ mtccr0 0
+
+ /*
+ * Invalidate the data cache if the data cache is turned off.
+ * - The 405 core does not invalidate the data cache on power-up
+ * or reset but does turn off the data cache. We cannot assume
+ * that the cache contents are valid.
+ * - If the data cache is turned on this must have been done by
+ * a bootloader and we assume that the cache contents are
+ * valid.
+ */
+ mfdccr r9
+ cmplwi r9,0
+ bne 2f
+ lis r9,0
+ li r8,256
+ mtctr r8
+1: dccci r0,r9
+ addi r9,r9,0x20
+ bdnz 1b
+2: b _zimage_start_lib
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 087e120e..14a0182 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -199,6 +199,10 @@
platformo="$object/fixed-head.o $object/redboot-8xx.o"
binary=y
;;
+simpleboot-virtex405-*)
+ platformo="$object/virtex405-head.o $object/simpleboot.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"