diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index f3d0d7c7..ae4a9b3 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -19,26 +19,27 @@
 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
 
+MACHINE		:= $(shell uname -m)
+ifeq ($(MACHINE),parisc*)
+NATIVE		:= 1
+endif
+
 ifdef CONFIG_64BIT
-CROSS_COMPILE	:= $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
-			echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
-else
-MACHINE := $(subst 64,,$(shell uname -m))
-ifneq ($(MACHINE),parisc)
-CROSS_COMPILE	:= hppa-linux-
-endif
+WIDTH		:= 64
+CROSS_COMPILE	:= hppa64-linux-gnu-
+else # 32-bit
+WIDTH		:=
 endif
 
-FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align 
+# attempt to help out folks who are cross-compiling
+ifeq ($(NATIVE),1)
+CROSS_COMPILE	:= hppa$(WIDTH)-linux-
+endif
 
 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
 
-ifneq ($(call cc-ifversion, -lt, 0303, "bad"),)
-$(error Sorry, GCC v3.3 or above is required.)
-endif
-
 cflags-y	:= -pipe
 
 # These flags should be implied by an hppa-linux configuration, but they
@@ -69,7 +70,7 @@
 kernel-$(CONFIG_HPUX)		+= hpux/
 
 core-y	+= $(addprefix arch/parisc/, $(kernel-y))
-libs-y	+= arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
+libs-y	+= arch/parisc/lib/
 
 drivers-$(CONFIG_OPROFILE)		+= arch/parisc/oprofile/
 
@@ -77,27 +78,27 @@
 	elif [ -x /sbin/palo ]; then echo /sbin/palo; \
 	fi)
 
+PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \
+	else echo $(obj)/palo.conf; \
+	fi)
+
 palo: vmlinux
-	@if [ -x $PALO ]; then \
+	@if test ! -x "$(PALO)"; then \
 		echo 'ERROR: Please install palo first (apt-get install palo)';\
 		echo 'or build it from source and install it somewhere in your $$PATH';\
 		false; \
 	fi
-	@if [ ! -f ./palo.conf ]; then \
-		cp arch/parisc/defpalo.conf palo.conf; \
-		echo 'A generic palo config file (./palo.conf) has been created for you.'; \
+	@if test ! -f "$(PALOCONF)"; then \
+		cp $(src)/arch/parisc/defpalo.conf $(obj)/palo.conf; \
+		echo 'A generic palo config file ($(obj)/palo.conf) has been created for you.'; \
 		echo 'You should check it and re-run "make palo".'; \
 		echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
 		false; \
 	fi
-	$(PALO) -f ./palo.conf
+	$(PALO) -f $(PALOCONF)
 
-oldpalo: vmlinux
-	export TOPDIR=`pwd`; \
-	unset STRIP LDFLAGS CPP CPPFLAGS AFLAGS CFLAGS CC LD; cd ../palo && make lifimage
-
-# Shorthands for known targets not supported by parisc, use palo as default
-Image zImage bzImage: palo
+# Shorthands for known targets not supported by parisc, use vmlinux as default
+Image zImage bzImage: vmlinux
 
 kernel_install: vmlinux
 	sh $(src)/arch/parisc/install.sh \
@@ -116,3 +117,12 @@
 	@echo  '		  (distribution) /sbin/installkernel or'
 	@echo  '		  copy to $$(INSTALL_PATH)'
 endef
+
+# we require gcc 3.3 or above to compile the kernel
+archprepare: checkbin
+checkbin:
+	@if test "$(call cc-version)" -lt "0303"; then \
+		echo -n "Sorry, GCC v3.3 or above is required to build " ; \
+		echo "the kernel." ; \
+		false ; \
+	fi
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 41fd069..9fc96e7 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,39 +1,51 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa6
-# Sun Mar 26 19:59:51 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:00:07 2007
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -43,31 +55,29 @@
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -91,6 +101,9 @@
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
 # CONFIG_SMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 # CONFIG_PREEMPT_NONE is not set
@@ -98,6 +111,7 @@
 # CONFIG_PREEMPT is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -108,6 +122,9 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HPUX is not set
 
 #
@@ -120,6 +137,7 @@
 # CONFIG_GSC_WAX is not set
 # CONFIG_EISA is not set
 # CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -127,14 +145,11 @@
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # PA-RISC specific drivers
 #
 CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_CHASSIS_WARN=y
 CONFIG_PDC_STABLE=y
 
 #
@@ -151,13 +166,15 @@
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -174,17 +191,23 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -192,37 +215,18 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -234,7 +238,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -250,7 +253,17 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -259,39 +272,24 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -300,13 +298,11 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -314,6 +310,9 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -333,104 +332,61 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
 # CONFIG_SCSI_ZALON is not set
 CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_LASI_82596=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ATMEL is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -442,26 +398,22 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -486,14 +438,22 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_HIL_OLD is not set
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -516,6 +476,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -523,6 +484,7 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_GSC=y
 CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -545,36 +507,15 @@
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=m
 # CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -582,46 +523,59 @@
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_STI=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -633,6 +587,7 @@
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_STI_CONSOLE=y
 CONFIG_FONTS=y
@@ -646,16 +601,11 @@
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -673,9 +623,11 @@
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -685,8 +637,10 @@
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
 
 #
 # GSC devices
@@ -694,15 +648,25 @@
 CONFIG_SND_HARMONY=y
 
 #
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -712,19 +676,28 @@
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
 #
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# DMA Devices
 #
+# CONFIG_AUXDISPLAY is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -734,6 +707,7 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
@@ -744,15 +718,16 @@
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -783,11 +758,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -795,6 +771,7 @@
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -806,6 +783,8 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -827,6 +806,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -834,12 +814,13 @@
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -892,6 +873,11 @@
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 CONFIG_PROFILING=y
@@ -901,21 +887,32 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_RODATA=y
 
 #
@@ -924,12 +921,13 @@
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -938,9 +936,18 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -949,21 +956,28 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index f3b812f..ea07121 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,73 +1,98 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc5-pa1
-# Fri Oct 21 23:04:54 2005
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:12:44 2007
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
 
 #
 # Processor type and features
@@ -80,11 +105,23 @@
 CONFIG_PA20=y
 CONFIG_PREFETCH=y
 CONFIG_64BIT=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NODES_SHIFT=3
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -95,7 +132,10 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_PREEMPT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_COMPAT=y
 CONFIG_NR_CPUS=8
 
@@ -104,7 +144,7 @@
 #
 # CONFIG_GSC is not set
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
@@ -124,13 +164,14 @@
 # PC-card bridges
 #
 CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
 CONFIG_PD6729=m
 CONFIG_I82092=m
 CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -139,6 +180,7 @@
 # CONFIG_SUPERIO is not set
 # CONFIG_CHASSIS_LCD_LED is not set
 CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_CHASSIS_WARN=y
 CONFIG_PDC_STABLE=y
 
 #
@@ -160,7 +202,10 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -177,97 +222,97 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
 CONFIG_IP_NF_MATCH_OWNER=m
 # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
 # CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -277,48 +322,38 @@
 #
 # CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_LIMIT is not set
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
 # CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_MARK is not set
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
 # CONFIG_IP6_NF_MATCH_EUI64 is not set
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_MARK is not set
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
 # CONFIG_IP_DCCP_CCID3 is not set
 
 #
 # DCCP Kernel Hacking
 #
 # CONFIG_IP_DCCP_DEBUG is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -329,11 +364,13 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -342,7 +379,17 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -351,34 +398,17 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -391,21 +421,14 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_IDE is not set
 
 #
@@ -413,6 +436,9 @@
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -432,18 +458,18 @@
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -451,59 +477,40 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
-
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -517,39 +524,25 @@
 # CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -558,10 +551,6 @@
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
@@ -573,15 +562,18 @@
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 CONFIG_PCMCIA_XIRCOM=m
-# CONFIG_PCMCIA_XIRTULIP is not set
 CONFIG_HP100=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
@@ -593,84 +585,46 @@
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 # CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-CONFIG_PCMCIA_NETWAVE=m
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-CONFIG_PCMCIA_RAYCS=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
-CONFIG_PCMCIA_WL3501=m
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -680,10 +634,6 @@
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -694,28 +644,25 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -732,6 +679,7 @@
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -747,6 +695,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -754,8 +703,10 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=17
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
@@ -765,83 +716,73 @@
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_MUX is not set
 CONFIG_PDC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
 # CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -856,32 +797,45 @@
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
+# CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# SN Devices
+# DMA Engine support
 #
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -891,6 +845,7 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
@@ -901,14 +856,16 @@
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -939,18 +896,20 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -963,6 +922,7 @@
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -983,6 +943,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -990,12 +951,13 @@
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1048,6 +1010,11 @@
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 CONFIG_PROFILING=y
@@ -1057,19 +1024,34 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_DEBUG_RWLOCK is not set
+# CONFIG_DEBUG_RODATA is not set
 
 #
 # Security options
@@ -1077,12 +1059,13 @@
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1091,32 +1074,47 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_BLOWFISH=m
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
 # CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
+CONFIG_CRYPTO_CAST5=m
 # CONFIG_CRYPTO_CAST6 is not set
 # CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 3509361..1bf22c9 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,38 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1-pa0
-# Tue Jan 17 08:21:01 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:16:46 2007
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -42,30 +51,27 @@
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -89,16 +95,26 @@
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
 # CONFIG_SMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PREEMPT is not set
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HPUX is not set
 
 #
@@ -113,7 +129,7 @@
 CONFIG_EISA_NAMES=y
 CONFIG_ISA=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 # CONFIG_PCI_LBA is not set
@@ -124,14 +140,11 @@
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # PA-RISC specific drivers
 #
 CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_CHASSIS_WARN=y
 CONFIG_PDC_STABLE=y
 
 #
@@ -151,6 +164,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -167,18 +182,32 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
 # CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -199,7 +228,14 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -208,39 +244,24 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 # CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
@@ -251,15 +272,13 @@
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
 # CONFIG_IDE is not set
 
 #
@@ -267,6 +286,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -286,18 +307,17 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -308,12 +328,14 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -327,23 +349,22 @@
 # CONFIG_SCSI_NCR53C406A is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=40
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
@@ -351,22 +372,14 @@
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
@@ -382,35 +395,21 @@
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# An alternative FireWire stack is available with EXPERIMENTAL=y
+#
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_LASI_82596=y
@@ -420,10 +419,6 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
 # CONFIG_TULIP_MMIO is not set
@@ -435,62 +430,47 @@
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PLIP is not set
@@ -501,24 +481,19 @@
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=y
 # CONFIG_NET_FC is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -543,19 +518,31 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_HIL_OLD is not set
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_HIL=y
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_UINPUT is not set
 # CONFIG_HP_SDC_RTC is not set
 
@@ -579,6 +566,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -586,17 +574,20 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_GSC=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
 # CONFIG_SERIAL_8250_FOURPORT is not set
 # CONFIG_SERIAL_8250_ACCENT is not set
 # CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
 # CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -605,6 +596,7 @@
 CONFIG_SERIAL_MUX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -612,35 +604,18 @@
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -648,46 +623,59 @@
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -698,16 +686,18 @@
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -717,21 +707,17 @@
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -749,8 +735,11 @@
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -760,13 +749,16 @@
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
 
 #
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -778,6 +770,18 @@
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -791,11 +795,13 @@
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -812,15 +818,25 @@
 CONFIG_SND_HARMONY=y
 
 #
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -831,20 +847,29 @@
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
+# CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# SN Devices
+# DMA Engine support
 #
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -860,9 +885,11 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -889,11 +916,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -912,6 +940,7 @@
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
@@ -982,22 +1011,32 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1007,13 +1046,10 @@
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
 CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_SECLVL is not set
-# CONFIG_SECURITY_SELINUX is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
@@ -1023,7 +1059,12 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1034,19 +1075,26 @@
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index eb2f9a3..c6def3c 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,39 +1,50 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa6
-# Sun Mar 26 20:03:29 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 21:24:00 2007
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -43,31 +54,29 @@
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -93,6 +102,9 @@
 CONFIG_PA20=y
 CONFIG_PREFETCH=y
 # CONFIG_64BIT is not set
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
 # CONFIG_SMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 # CONFIG_PREEMPT_NONE is not set
@@ -100,6 +112,7 @@
 # CONFIG_PREEMPT is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -110,6 +123,9 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HPUX is not set
 
 #
@@ -117,7 +133,7 @@
 #
 # CONFIG_GSC is not set
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_LBA=y
 CONFIG_IOSAPIC=y
@@ -127,10 +143,6 @@
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -139,6 +151,7 @@
 CONFIG_SUPERIO=y
 CONFIG_CHASSIS_LCD_LED=y
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_CHASSIS_WARN=y
 CONFIG_PDC_STABLE=y
 
 #
@@ -155,13 +168,15 @@
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -178,22 +193,36 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 CONFIG_NETFILTER_DEBUG=y
 
@@ -201,42 +230,24 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -247,7 +258,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -263,7 +273,17 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -272,33 +292,17 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -310,14 +314,15 @@
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -331,19 +336,26 @@
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
+CONFIG_IDEDMA_ONLYDISK=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
@@ -354,8 +366,10 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -365,10 +379,10 @@
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -376,6 +390,9 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -395,18 +412,17 @@
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -415,66 +431,53 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-CONFIG_SCSI_ATA_PIIX=m
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-CONFIG_SCSI_SATA_PROMISE=m
-# CONFIG_SCSI_SATA_SX4 is not set
-CONFIG_SCSI_SATA_SIL=m
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-CONFIG_SCSI_SATA_VIA=m
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_MULTIPATH_EMC is not set
+# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_DELAY is not set
 
 #
 # Fusion MPT device support
@@ -485,49 +488,31 @@
 # CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
@@ -539,13 +524,16 @@
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
@@ -558,16 +546,15 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -579,27 +566,36 @@
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 # CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -612,27 +608,23 @@
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -655,11 +647,14 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -679,6 +674,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -686,6 +682,7 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -704,38 +701,19 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -743,46 +721,59 @@
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -793,17 +784,20 @@
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -813,21 +807,17 @@
 CONFIG_DUMMY_CONSOLE_COLUMNS=160
 CONFIG_DUMMY_CONSOLE_ROWS=64
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_STI_CONSOLE=y
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -845,9 +835,11 @@
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -855,7 +847,6 @@
 # Generic devices
 #
 CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -866,7 +857,7 @@
 # PCI devices
 #
 CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -879,6 +870,18 @@
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -898,6 +901,7 @@
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -907,22 +911,43 @@
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
 
 #
 # USB devices
 #
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
 
 #
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -930,7 +955,7 @@
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -940,15 +965,16 @@
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
 
@@ -970,54 +996,14 @@
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
 #
@@ -1034,16 +1020,22 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1054,20 +1046,28 @@
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
+# CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# DMA Engine support
 #
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1077,21 +1077,23 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1121,11 +1123,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1164,6 +1167,7 @@
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1171,7 +1175,6 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1224,6 +1227,11 @@
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 CONFIG_PROFILING=y
@@ -1233,21 +1241,32 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_RODATA=y
 
 #
@@ -1255,12 +1274,12 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
@@ -1269,7 +1288,15 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_BLOWFISH=m
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1280,21 +1307,28 @@
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index b38b58e..448a757 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,39 +1,51 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa10
-# Sun Apr  2 15:26:38 2006
+# Linux kernel version: 2.6.23
+# Fri Oct 12 20:54:57 2007
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
 CONFIG_STACK_GROWSUP=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_IRQ_PER_CPU=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -43,31 +55,29 @@
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -101,6 +111,7 @@
 # CONFIG_PREEMPT is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -111,6 +122,9 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HPUX is not set
 
 #
@@ -125,7 +139,7 @@
 CONFIG_EISA_NAMES=y
 # CONFIG_ISA is not set
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
@@ -154,10 +168,6 @@
 CONFIG_PD6729=y
 CONFIG_I82092=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -166,6 +176,7 @@
 CONFIG_SUPERIO=y
 CONFIG_CHASSIS_LCD_LED=y
 CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_CHASSIS_WARN=y
 CONFIG_PDC_STABLE=y
 
 #
@@ -182,13 +193,15 @@
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -205,33 +218,39 @@
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
 CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
 # CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -243,7 +262,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -259,7 +277,17 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -268,41 +296,26 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
@@ -317,13 +330,14 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
@@ -334,24 +348,32 @@
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
+CONFIG_IDEDMA_ONLYDISK=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
@@ -362,8 +384,10 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 CONFIG_BLK_DEV_NS87415=y
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -373,10 +397,10 @@
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -384,6 +408,9 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -403,18 +430,17 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -424,11 +450,13 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -438,55 +466,45 @@
 # CONFIG_SCSI_IMM is not set
 CONFIG_SCSI_LASI700=y
 CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
 CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
 # CONFIG_DM_CRYPT is not set
 # CONFIG_DM_SNAPSHOT is not set
 # CONFIG_DM_MIRROR is not set
 # CONFIG_DM_ZERO is not set
 # CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
 
 #
 # Fusion MPT device support
@@ -499,35 +517,20 @@
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_LASI_82596=y
@@ -536,10 +539,6 @@
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 CONFIG_TULIP=y
@@ -554,6 +553,10 @@
 # CONFIG_PCMCIA_XIRTULIP is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -561,7 +564,6 @@
 # CONFIG_AC3200 is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_LNE390 is not set
@@ -577,15 +579,14 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=y
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -597,64 +598,36 @@
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-CONFIG_NET_RADIO=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Obsolete Wireless cards support (pre-802.11)
+# USB Network Adapters
 #
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=y
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -664,10 +637,6 @@
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -681,27 +650,23 @@
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -726,14 +691,23 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_HIL_OLD is not set
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_HIL=y
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -757,6 +731,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -764,6 +739,8 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_GSC=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_CS=y
 CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -788,25 +765,14 @@
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=m
 # CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 
 #
@@ -816,16 +782,8 @@
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -833,46 +791,59 @@
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -883,17 +854,20 @@
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -903,6 +877,7 @@
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_STI_CONSOLE=y
 CONFIG_FONTS=y
@@ -916,16 +891,11 @@
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_PARISC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -938,35 +908,36 @@
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
 CONFIG_SND_SEQUENCER=y
 # CONFIG_SND_SEQ_DUMMY is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
 #
 # Generic devices
 #
-CONFIG_SND_OPL3_LIB=y
 CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PORTMAN2X4 is not set
 
 #
 # PCI devices
 #
 CONFIG_SND_AD1889=y
-CONFIG_SND_AD1889_OPL3=y
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -979,6 +950,18 @@
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -998,6 +981,7 @@
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -1007,15 +991,19 @@
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
 
 #
 # USB devices
 #
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 
 #
 # PCMCIA devices
 #
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
 
 #
 # GSC devices
@@ -1023,15 +1011,34 @@
 CONFIG_SND_HARMONY=y
 
 #
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1039,7 +1046,7 @@
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -1049,15 +1056,16 @@
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -1072,52 +1080,10 @@
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
 CONFIG_USB_MON=y
 
 #
@@ -1135,16 +1101,22 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1155,20 +1127,29 @@
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
+# CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# DMA Engine support
 #
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1178,16 +1159,19 @@
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -1217,11 +1201,12 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1229,6 +1214,7 @@
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1261,6 +1247,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
@@ -1268,12 +1255,13 @@
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1326,6 +1314,11 @@
 CONFIG_NLS_UTF8=y
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 CONFIG_PROFILING=y
@@ -1335,21 +1328,32 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_DEBUG_RODATA is not set
 
 #
@@ -1358,12 +1362,13 @@
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1372,9 +1377,18 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1383,21 +1397,28 @@
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S
index 0b9d5b1..38a1c1b 100644
--- a/arch/parisc/hpux/gate.S
+++ b/arch/parisc/hpux/gate.S
@@ -20,7 +20,7 @@
 	.import hpux_call_table
 	.import hpux_syscall_exit,code
 
-	.align 4096
+	.align	PAGE_SIZE
 ENTRY(hpux_gateway_page)
 	nop
 #ifdef CONFIG_64BIT
@@ -103,5 +103,5 @@
 	ldo	-ENOSYS(%r0),%r28
 ENDPROC(hpux_gateway_page)
 
-	.align 4096
+	.align	PAGE_SIZE
 ENTRY(end_hpux_gateway_page)
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index d3b7917..eaa79bc 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -290,9 +290,6 @@
 	DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE);
 	DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
 	DEFINE(ASM_PT_INITIAL, PT_INITIAL);
-	DEFINE(ASM_PAGE_SIZE, PAGE_SIZE);
-	DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64);
-	DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128);
 	BLANK();
 	DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
 	DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 42598ab..111d472 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -98,7 +98,6 @@
 	 * The "get_stack" macros are responsible for determining the
 	 * kernel stack value.
 	 *
-	 * For Faults:
 	 *      If sr7 == 0
 	 *          Already using a kernel stack, so call the
 	 *          get_stack_use_r30 macro to push a pt_regs structure
@@ -110,26 +109,6 @@
 	 *          task pointer pointed to by cr30. Set the stack
 	 *          pointer to point to the end of the task structure.
 	 *
-	 * For Interrupts:
-	 *      If sr7 == 0
-	 *          Already using a kernel stack, check to see if r30
-	 *          is already pointing to the per processor interrupt
-	 *          stack. If it is, call the get_stack_use_r30 macro
-	 *          to push a pt_regs structure on the stack, and store
-	 *          registers there. Otherwise, call get_stack_use_cr31
-	 *          to get a pointer to the base of the interrupt stack
-	 *          and push a pt_regs structure on that stack.
-	 *      else
-	 *          Need to set up a kernel stack, so call the
-	 *          get_stack_use_cr30 macro to set up a pointer
-	 *          to the pt_regs structure contained within the
-	 *          task pointer pointed to by cr30. Set the stack
-	 *          pointer to point to the end of the task structure.
-	 *          N.B: We don't use the interrupt stack for the
-	 *          first interrupt from userland, because signals/
-	 *          resched's are processed when returning to userland,
-	 *          and we can sleep in those cases.
-	 *
 	 * Note that we use shadowed registers for temps until
 	 * we can save %r26 and %r29. %r26 is used to preserve
 	 * %r8 (a shadowed register) which temporarily contained
@@ -652,7 +631,7 @@
 
 	.text
 
-	.align 4096
+	.align	PAGE_SIZE
 
 ENTRY(fault_vector_20)
 	/* First vector is invalid (0) */
@@ -904,7 +883,7 @@
 	 *
 	 */
 
-	.align 4096
+	.align	PAGE_SIZE
 
 ENTRY(syscall_exit_rfi)
 	mfctl   %cr30,%r16
@@ -1086,23 +1065,13 @@
 
 intr_extint:
 	CMPIB=,n 0,%r16,1f
+
 	get_stack_use_cr30
-	b,n 3f
+	b,n 2f
 
 1:
-#if 0  /* Interrupt Stack support not working yet! */
-	mfctl	%cr31,%r1
-	copy	%r30,%r17
-	/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-	DEPI	0,31,15,%r17
-	CMPB=,n	%r1,%r17,2f
-	get_stack_use_cr31
-	b,n 3f
-#endif
-2:
 	get_stack_use_r30
-
-3:
+2:
 	save_specials	%r29
 	virt_map
 	save_general	%r29
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 9676c48..a7b8859 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -95,7 +95,7 @@
 
 1:
 	stw		%r3,0(%r4)
-	ldo		(ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
+	ldo		(PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
 	addib,>		-1,%r1,1b
 #if PT_NLEVELS == 3
 	ldo             ASM_PMD_ENTRY_SIZE(%r4),%r4
@@ -128,10 +128,6 @@
 	/* And the stack pointer too */
 	ldo             THREAD_SZ_ALGN(%r6),%sp
 
-	/* And the interrupt stack */
-	load32		interrupt_stack,%r6
-	mtctl           %r6,%cr31
-
 #ifdef CONFIG_SMP
 	/* Set the smp rendevous address into page zero.
 	** It would be safer to do this in init_smp_config() but
diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S
index 43b41df..2cbf13b 100644
--- a/arch/parisc/kernel/hpmc.S
+++ b/arch/parisc/kernel/hpmc.S
@@ -55,13 +55,13 @@
 	 * IODC requires 7K byte stack.  That leaves 1K byte for os_hpmc.
 	 */
 
-	.align 4096
+	.align	PAGE_SIZE
 hpmc_stack:
 	.block 16384
 
 #define HPMC_IODC_BUF_SIZE 0x8000
 
-	.align 4096
+	.align	PAGE_SIZE
 hpmc_iodc_buf:
 	.block HPMC_IODC_BUF_SIZE
 
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 446f98d..26198a0 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -49,7 +49,6 @@
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-unsigned char interrupt_stack[ISTACK_SIZE] __attribute__ ((section("init_istack"), aligned(4096)));
 union thread_union init_thread_union
 	__attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 90b2408..5901092 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -289,7 +289,7 @@
 	 */
 
 	ldd		0(%r25), %r19
-	ldi		ASM_PAGE_SIZE_DIV128, %r1
+	ldi		(PAGE_SIZE / 128), %r1
 
 	ldw		64(%r25), %r0		/* prefetch 1 cacheline ahead */
 	ldw		128(%r25), %r0		/* prefetch 2 */
@@ -355,7 +355,7 @@
 	 * use ldd/std on a 32 bit kernel.
 	 */
 	ldw		0(%r25), %r19
-	ldi		ASM_PAGE_SIZE_DIV64, %r1
+	ldi		(PAGE_SIZE / 64), %r1
 
 1:
 	ldw		4(%r25), %r20
@@ -553,7 +553,7 @@
 	pdtlb		0(%r28)
 
 #ifdef CONFIG_64BIT
-	ldi		ASM_PAGE_SIZE_DIV128, %r1
+	ldi		(PAGE_SIZE / 128), %r1
 
 	/* PREFETCH (Write) has not (yet) been proven to help here */
 	/* #define	PREFETCHW_OP	ldd		256(%0), %r0 */
@@ -578,7 +578,7 @@
 	ldo		128(%r28), %r28
 
 #else	/* ! CONFIG_64BIT */
-	ldi		ASM_PAGE_SIZE_DIV64, %r1
+	ldi		(PAGE_SIZE / 64), %r1
 
 1:
 	stw		%r0, 0(%r28)
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 7aca704..671ee5b 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -122,31 +122,9 @@
 EXPORT_SYMBOL($$divI_14);
 EXPORT_SYMBOL($$divI_15);
 
-extern void __ashrdi3(void);
-extern void __ashldi3(void);
-extern void __lshrdi3(void);
-extern void __muldi3(void);
-
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__muldi3);
-
 asmlinkage void * __canonicalize_funcptr_for_compare(void *);
 EXPORT_SYMBOL(__canonicalize_funcptr_for_compare);
 
-#ifdef CONFIG_64BIT
-extern void __divdi3(void);
-extern void __udivdi3(void);
-extern void __umoddi3(void);
-extern void __moddi3(void);
-
-EXPORT_SYMBOL(__divdi3);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__moddi3);
-#endif
-
 #ifndef CONFIG_64BIT
 extern void $$dyncall(void);
 EXPORT_SYMBOL($$dyncall);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 23c1388..41f8e32 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -569,11 +569,10 @@
 static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
 					  dma_addr_t *dma_handle, gfp_t flag)
 {
-	void *addr = NULL;
+	void *addr;
 
-	/* rely on kmalloc to be cacheline aligned */
-	addr = kmalloc(size, flag);
-	if(addr)
+	addr = (void *)__get_free_pages(flag, get_order(size));
+	if (addr)
 		*dma_handle = (dma_addr_t)virt_to_phys(addr);
 
 	return addr;
@@ -582,7 +581,7 @@
 static void pa11_dma_free_noncoherent(struct device *dev, size_t size,
 					void *vaddr, dma_addr_t iova)
 {
-	kfree(vaddr);
+	free_pages((unsigned long)vaddr, get_order(size));
 	return;
 }
 
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 563df00..507d0ac 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -194,37 +194,13 @@
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl);
 }
 
-
-/* KLUGE: Link the child and parent resources - generic PCI didn't */
-static void
-pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
-{
-	if (!r->parent) {
-		printk(KERN_EMERG "PCI: resource not parented! [%p-%p]\n",
-				(void*) r->start, (void*) r->end);
-		r->parent = hba_res;
-
-		/* reverse link is harder *sigh*  */
-		if (r->parent->child) {
-			if (r->parent->sibling) {
-				struct resource *next = r->parent->sibling;
-				while (next->sibling)
-					 next = next->sibling;
-				next->sibling = r;
-			} else {
-				r->parent->sibling = r;
-			}
-		} else
-			r->parent->child = r;
-	}
-}
-
 /* called by drivers/pci/setup-bus.c:pci_setup_bridge().  */
 void __devinit pcibios_resource_to_bus(struct pci_dev *dev,
 		struct pci_bus_region *region, struct resource *res)
 {
-	struct pci_bus *bus = dev->bus;
-	struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
+#ifdef CONFIG_64BIT
+	struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
+#endif
 
 	if (res->flags & IORESOURCE_IO) {
 		/*
@@ -243,23 +219,15 @@
 	}
 
 	DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n",
-		bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
+		dev->bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM",
 		region->start, region->end);
-
-	/* KLUGE ALERT
-	** if this resource isn't linked to a "parent", then it seems
-	** to be a child of the HBA - lets link it in.
-	*/
-	pcibios_link_hba_resources(&hba->io_space, bus->resource[0]);
-	pcibios_link_hba_resources(&hba->lmmio_space, bus->resource[1]);
 }
 
 void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 			      struct pci_bus_region *region)
 {
 #ifdef CONFIG_64BIT
-	struct pci_bus *bus = dev->bus;
-	struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
+	struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data);
 #endif
 
 	if (res->flags & IORESOURCE_MEM) {
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 549f548..370086f 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -82,7 +82,12 @@
 	unsigned long cpuid;
 	struct cpuinfo_parisc *p;
 
-#ifndef CONFIG_SMP
+#ifdef CONFIG_SMP
+	if (num_online_cpus() >= NR_CPUS) {
+		printk(KERN_INFO "num_online_cpus() >= NR_CPUS\n");
+		return 1;
+	}
+#else
 	if (boot_cpu_data.cpu_count > 0) {
 		printk(KERN_INFO "CONFIG_SMP=n  ignoring additional CPUs\n");
 		return 1;
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index d7bc7bb..85fc775 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -432,22 +432,10 @@
 void __init smp_callin(void)
 {
 	int slave_id = cpu_now_booting;
-#if 0
-	void *istack;
-#endif
 
 	smp_cpu_init(slave_id);
 	preempt_disable();
 
-#if 0	/* NOT WORKING YET - see entry.S */
-	istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER);
-	if (istack == NULL) {
-	    printk(KERN_CRIT "Failed to allocate interrupt stack for cpu %d\n",slave_id);
-	    BUG();
-	}
-	mtctl(istack,31);
-#endif
-
 	flush_cache_all_local(); /* start with known state */
 	flush_tlb_all_local(NULL);
 
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 2989c66..50bbf33 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -473,3 +473,10 @@
 	return sys_lookup_dcookie((u64)cookie_high << 32 | cookie_low,
 				  buf, len);
 }
+
+asmlinkage long compat_sys_fallocate(int fd, int mode, u32 offhi, u32 offlo,
+				u32 lenhi, u32 lenlo)
+{
+        return sys_fallocate(fd, mode, ((loff_t)offhi << 32) | offlo,
+                             ((loff_t)lenhi << 32) | lenlo);
+}
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 56f6231..69b6eeb 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -10,6 +10,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
+#include <asm/page.h>
 #include <asm/psw.h>
 #include <asm/thread_info.h>
 #include <asm/assembly.h>
@@ -38,7 +39,7 @@
 	 * pointers.
 	 */
 
-	.align ASM_PAGE_SIZE
+	.align PAGE_SIZE
 ENTRY(linux_gateway_page)
 
         /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */
@@ -597,7 +598,7 @@
 
 
 	/* Make sure nothing else is placed on this page */
-	.align ASM_PAGE_SIZE
+	.align PAGE_SIZE
 END(linux_gateway_page)
 ENTRY(end_linux_gateway_page)
 
@@ -608,7 +609,7 @@
 
 	.section .rodata,"a"
 
-	.align ASM_PAGE_SIZE
+	.align PAGE_SIZE
 	/* Light-weight-syscall table */
 	/* Start of lws table. */
 ENTRY(lws_table)
@@ -617,13 +618,13 @@
 END(lws_table)
 	/* End of lws table */
 
-	.align ASM_PAGE_SIZE
+	.align PAGE_SIZE
 ENTRY(sys_call_table)
 #include "syscall_table.S"
 END(sys_call_table)
 
 #ifdef CONFIG_64BIT
-	.align ASM_PAGE_SIZE
+	.align PAGE_SIZE
 ENTRY(sys_call_table64)
 #define SYSCALL_TABLE_64BIT
 #include "syscall_table.S"
@@ -636,7 +637,7 @@
 		will use this set of locks 
 	*/
 	.section .data
-	.align 4096
+	.align	PAGE_SIZE
 ENTRY(lws_lock_start)
 	/* lws locks */
 	.align 16
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 2540786..117438e 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -403,6 +403,7 @@
 	ENTRY_COMP(signalfd)
 	ENTRY_COMP(timerfd)
 	ENTRY_SAME(eventfd)
+	ENTRY_COMP(fallocate)		/* 305 */
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 8b3062a..24be86b 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -189,16 +189,14 @@
 #ifdef CONFIG_SMP
 int update_cr16_clocksource(void)
 {
-	int change = 0;
-
 	/* since the cr16 cycle counters are not synchronized across CPUs,
 	   we'll check if we should switch to a safe clocksource: */
 	if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) {
 		clocksource_change_rating(&clocksource_cr16, 0);
-		change = 1;
+		return 1;
 	}
 
-	return change;
+	return 0;
 }
 #else
 int update_cr16_clocksource(void)
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index cf780cb..701b2d2 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -209,8 +209,8 @@
 
 static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int frame_size)
 {
-	void handle_interruption(int, struct pt_regs *);
-	static unsigned long *hi = (unsigned long)&handle_interruption;
+	extern void handle_interruption(int, struct pt_regs *);
+	static unsigned long *hi = (unsigned long *)&handle_interruption;
 
 	if (pc == get_func_addr(hi)) {
 		struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN);
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index ee7a16e..40d0ff9 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -46,168 +46,211 @@
 #endif
 SECTIONS
 {
+	. = KERNEL_BINARY_TEXT_START;
 
-  . = KERNEL_BINARY_TEXT_START;
-
-  _text = .;			/* Text and read-only data */
-  .text ALIGN(16) : {
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	*(.text.do_softirq)
-	*(.text.sys_exit)
-	*(.text.do_sigaltstack)
-	*(.text.do_fork)
-	*(.text.*)
-	*(.fixup)
-	*(.lock.text)		/* out-of-line lock text */
-	*(.gnu.warning)
+	_text = .;		/* Text and read-only data */
+	.text ALIGN(16) : {
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		*(.text.do_softirq)
+		*(.text.sys_exit)
+		*(.text.do_sigaltstack)
+		*(.text.do_fork)
+		*(.text.*)
+		*(.fixup)
+		*(.lock.text)		/* out-of-line lock text */
+		*(.gnu.warning)
 	} = 0
+	/* End of text section */
+	_etext = .;
 
-  _etext = .;			/* End of text section */
+	RODATA
+	BUG_TABLE
 
-  RODATA
-
-  BUG_TABLE
-
-  /* writeable */
-  . = ALIGN(ASM_PAGE_SIZE);	/* Make sure this is page aligned so
-  				   that we can properly leave these
-				   as writable */
-  data_start = .;
-
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  NOTES
-
-  __start___unwind = .;         /* unwind info */
-  .PARISC.unwind : { *(.PARISC.unwind) }
-  __stop___unwind = .;
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(16);
-  .data.read_mostly : { *(.data.read_mostly) }
-
-  . = ALIGN(L1_CACHE_BYTES);
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
+	/* writeable */
+	/* Make sure this is page aligned so
+	 * that we can properly leave these
+	 * as writable
+	 */
+	. = ALIGN(PAGE_SIZE);
+	data_start = .;
+	. = ALIGN(16);
+	/* Exception table */
+	__ex_table : {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
 	}
 
-  . = ALIGN(L1_CACHE_BYTES);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+	NOTES
 
-  /* PA-RISC locks requires 16-byte alignment */
-  . = ALIGN(16);
-  .data.lock_aligned : { *(.data.lock_aligned) }
-
-  . = ALIGN(ASM_PAGE_SIZE);
-  /* nosave data is really only used for software suspend...it's here
-   * just in case we ever implement it */
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(ASM_PAGE_SIZE);
-  __nosave_end = .;
-
-  _edata = .;			/* End of data section */
-
-  __bss_start = .;		/* BSS */
-  /* page table entries need to be PAGE_SIZE aligned */
-  . = ALIGN(ASM_PAGE_SIZE);
-  .data.vmpages : {
-	*(.data.vm0.pmd)
-	*(.data.vm0.pgd)
-	*(.data.vm0.pte)
+	/* unwind info */
+	.PARISC.unwind : {
+		__start___unwind = .;
+		*(.PARISC.unwind)
+		__stop___unwind = .;
 	}
-  .bss : { *(.bss) *(COMMON) }
-  __bss_stop = .;
+
+	/* rarely changed data like cpu maps */
+	. = ALIGN(16);
+	.data.read_mostly : {
+		*(.data.read_mostly)
+	}
+
+	. = ALIGN(L1_CACHE_BYTES);
+	/* Data */
+	.data : {
+		DATA_DATA
+		CONSTRUCTORS
+	}
+
+	. = ALIGN(L1_CACHE_BYTES);
+	.data.cacheline_aligned : {
+		*(.data.cacheline_aligned)
+	}
+
+	/* PA-RISC locks requires 16-byte alignment */
+	. = ALIGN(16);
+	.data.lock_aligned : {
+		*(.data.lock_aligned)
+	}
+
+	/* nosave data is really only used for software suspend...it's here
+	 * just in case we ever implement it
+	 */
+	. = ALIGN(PAGE_SIZE);
+	__nosave_begin = .;
+	.data_nosave : {
+		*(.data.nosave)
+	}
+	. = ALIGN(PAGE_SIZE);
+	__nosave_end = .;
+
+	/* End of data section */
+	_edata = .;
+
+	/* BSS */
+	__bss_start = .;
+	/* page table entries need to be PAGE_SIZE aligned */
+	. = ALIGN(PAGE_SIZE);
+	.data.vmpages : {
+		*(.data.vm0.pmd)
+		*(.data.vm0.pgd)
+		*(.data.vm0.pte)
+	}
+	.bss : {
+		*(.bss)
+		*(COMMON)
+	}
+	__bss_stop = .;
 
 
-  /* assembler code expects init_task to be 16k aligned */
-  . = ALIGN(16384); 		/* init_task */
-  .data.init_task : { *(.data.init_task) }
-
-  /* The interrupt stack is currently partially coded, but not yet
-   * implemented */
-  . = ALIGN(16384);	
-  init_istack : { *(init_istack) }
+	/* assembler code expects init_task to be 16k aligned */
+	. = ALIGN(16384);
+	/* init_task */
+	.data.init_task : {
+		*(.data.init_task)
+	}
 
 #ifdef CONFIG_64BIT
-  . = ALIGN(16);               /* Linkage tables */
-  .opd : { *(.opd) } PROVIDE (__gp = .); 
-  .plt : { *(.plt) } 
-  .dlt : { *(.dlt) }
+	. = ALIGN(16);
+	/* Linkage tables */
+	.opd : {
+		*(.opd)
+	} PROVIDE (__gp = .); 
+	.plt : {
+		*(.plt)
+	} 
+	.dlt : {
+		*(.dlt)
+	}
 #endif
 
-  /* reserve space for interrupt stack by aligning __init* to 16k */
-  . = ALIGN(16384);
-  __init_begin = .;
-  .init.text : { 
-	_sinittext = .;
-	*(.init.text)
-	_einittext = .;
-  }
-  .init.data : { *(.init.data) }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-  SECURITY_INIT
-  /* alternate instruction replacement.  This is a mechanism x86 uses
-   * to detect the CPU type and replace generic instruction sequences
-   * with CPU specific ones.  We don't currently do this in PA, but
-   * it seems like a good idea... */
-  . = ALIGN(4);
-  __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) } 
-  __alt_instructions_end = .; 
- .altinstr_replacement : { *(.altinstr_replacement) } 
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : { *(.exit.text) }
-  .exit.data : { *(.exit.data) }
+	/* reserve space for interrupt stack by aligning __init* to 16k */
+	. = ALIGN(16384);
+	__init_begin = .;
+	.init.text : { 
+		_sinittext = .;
+		*(.init.text)
+		_einittext = .;
+	}
+	.init.data : {
+		*(.init.data)
+	}
+	. = ALIGN(16);
+	.init.setup : {
+		__setup_start = .;
+		*(.init.setup)
+		__setup_end = .;
+	}
+	.initcall.init : {
+		__initcall_start = .;
+		INITCALLS
+		__initcall_end = .;
+	}
+	.con_initcall.init : {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+	SECURITY_INIT
+
+	/* alternate instruction replacement.  This is a mechanism x86 uses
+	 * to detect the CPU type and replace generic instruction sequences
+	 * with CPU specific ones.  We don't currently do this in PA, but
+	 * it seems like a good idea...
+	 */
+	. = ALIGN(4);
+	.altinstructions : {
+		__alt_instructions = .;
+		*(.altinstructions)
+		__alt_instructions_end = .; 
+	} 
+	.altinstr_replacement : {
+		*(.altinstr_replacement)
+	} 
+
+	/* .exit.text is discard at runtime, not link time, to deal with references
+	 *  from .altinstructions and .eh_frame
+	 */
+	.exit.text : {
+		*(.exit.text)
+	}
+	.exit.data : {
+		*(.exit.data)
+	}
 #ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(ASM_PAGE_SIZE);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
+	. = ALIGN(PAGE_SIZE);
+	.init.ramfs : {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+	}
 #endif
 
-  PERCPU(ASM_PAGE_SIZE)
+	PERCPU(PAGE_SIZE)
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+	/* freed after init ends here */
+	_end = . ;
 
-  . = ALIGN(ASM_PAGE_SIZE);
-  __init_end = .;
-  /* freed after init ends here */
-	
-  _end = . ;
-
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	*(.exitcall.exit)
+	/* Sections to be discarded */
+	/DISCARD/ : {
+		*(.exitcall.exit)
 #ifdef CONFIG_64BIT
-	/* temporary hack until binutils is fixed to not emit these
-	 for static binaries */
-	*(.interp)
-	*(.dynsym)
-	*(.dynstr)
-	*(.dynamic)
-	*(.hash)
-	*(.gnu.hash)
+		/* temporary hack until binutils is fixed to not emit these
+	 	 * for static binaries
+		 */
+		*(.interp)
+		*(.dynsym)
+		*(.dynstr)
+		*(.dynamic)
+		*(.hash)
+		*(.gnu.hash)
 #endif
 	}
 
-  STABS_DEBUG
-  .note 0 : { *(.note) }	
-
+	STABS_DEBUG
+	.note 0 : { *(.note) }	
 }
diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile
index 5f2e690..7ce406c 100644
--- a/arch/parisc/lib/Makefile
+++ b/arch/parisc/lib/Makefile
@@ -4,4 +4,4 @@
 
 lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o
 
-obj-y	:= iomap.o
+obj-y	:= libgcc/ milli/ iomap.o
diff --git a/arch/parisc/lib/libgcc/Makefile b/arch/parisc/lib/libgcc/Makefile
new file mode 100644
index 0000000..b67a85a
--- /dev/null
+++ b/arch/parisc/lib/libgcc/Makefile
@@ -0,0 +1,4 @@
+obj-y	:= __ashldi3.o __ashrdi3.o __clzsi2.o __divdi3.o __divsi3.o	\
+		__lshrdi3.o __moddi3.o __modsi3.o __udivdi3.o		\
+		__udivmoddi4.o __udivmodsi4.o __udivsi3.o 		\
+		__umoddi3.o __umodsi3.o __muldi3.o __umulsidi3.o
diff --git a/arch/parisc/lib/libgcc/__ashldi3.c b/arch/parisc/lib/libgcc/__ashldi3.c
new file mode 100644
index 0000000..a14a257
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__ashldi3.c
@@ -0,0 +1,19 @@
+#include "libgcc.h"
+
+u64 __ashldi3(u64 v, int cnt)
+{
+	int c = cnt & 31;
+	u32 vl = (u32) v;
+	u32 vh = (u32) (v >> 32);
+
+	if (cnt & 32) {
+		vh = (vl << c);
+		vl = 0;
+	} else {
+		vh = (vh << c) + (vl >> (32 - c));
+		vl = (vl << c);
+	}
+
+	return ((u64) vh << 32) + vl;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/parisc/lib/libgcc/__ashrdi3.c b/arch/parisc/lib/libgcc/__ashrdi3.c
new file mode 100644
index 0000000..8636a5a
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__ashrdi3.c
@@ -0,0 +1,19 @@
+#include "libgcc.h"
+
+u64 __ashrdi3(u64 v, int cnt)
+{
+	int c = cnt & 31;
+	u32 vl = (u32) v;
+	u32 vh = (u32) (v >> 32);
+
+	if (cnt & 32) {
+		vl = ((s32) vh >> c);
+		vh = (s32) vh >> 31;
+	} else {
+		vl = (vl >> c) + (vh << (32 - c));
+		vh = ((s32) vh >> c);
+	}
+
+	return ((u64) vh << 32) + vl;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/parisc/lib/libgcc/__clzsi2.c b/arch/parisc/lib/libgcc/__clzsi2.c
new file mode 100644
index 0000000..a7aa2f5
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__clzsi2.c
@@ -0,0 +1,30 @@
+#include "libgcc.h"
+
+u32 __clzsi2(u32 v)
+{
+	int p = 31;
+
+	if (v & 0xffff0000) {
+		p -= 16;
+		v >>= 16;
+	}
+	if (v & 0xff00) {
+		p -= 8;
+		v >>= 8;
+	}
+	if (v & 0xf0) {
+		p -= 4;
+		v >>= 4;
+	}
+	if (v & 0xc) {
+		p -= 2;
+		v >>= 2;
+	}
+	if (v & 0x2) {
+		p -= 1;
+		v >>= 1;
+	}
+
+	return p;
+}
+EXPORT_SYMBOL(__clzsi2);
diff --git a/arch/parisc/lib/libgcc/__divdi3.c b/arch/parisc/lib/libgcc/__divdi3.c
new file mode 100644
index 0000000..f23c6fe
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__divdi3.c
@@ -0,0 +1,23 @@
+#include "libgcc.h"
+
+s64 __divdi3(s64 num, s64 den)
+{
+	int minus = 0;
+	s64 v;
+
+	if (num < 0) {
+		num = -num;
+		minus = 1;
+	}
+	if (den < 0) {
+		den = -den;
+		minus ^= 1;
+	}
+
+	v = __udivmoddi4(num, den, NULL);
+	if (minus)
+		v = -v;
+
+	return v;
+}
+EXPORT_SYMBOL(__divdi3);
diff --git a/arch/parisc/lib/libgcc/__divsi3.c b/arch/parisc/lib/libgcc/__divsi3.c
new file mode 100644
index 0000000..730fb53
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__divsi3.c
@@ -0,0 +1,23 @@
+#include "libgcc.h"
+
+s32 __divsi3(s32 num, s32 den)
+{
+	int minus = 0;
+	s32 v;
+
+	if (num < 0) {
+		num = -num;
+		minus = 1;
+	}
+	if (den < 0) {
+		den = -den;
+		minus ^= 1;
+	}
+
+	v = __udivmodsi4(num, den, NULL);
+	if (minus)
+		v = -v;
+
+	return v;
+}
+EXPORT_SYMBOL(__divsi3);
diff --git a/arch/parisc/lib/libgcc/__lshrdi3.c b/arch/parisc/lib/libgcc/__lshrdi3.c
new file mode 100644
index 0000000..4a82070
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__lshrdi3.c
@@ -0,0 +1,19 @@
+#include "libgcc.h"
+
+u64 __lshrdi3(u64 v, int cnt)
+{
+	int c = cnt & 31;
+	u32 vl = (u32) v;
+	u32 vh = (u32) (v >> 32);
+
+	if (cnt & 32) {
+		vl = (vh >> c);
+		vh = 0;
+	} else {
+		vl = (vl >> c) + (vh << (32 - c));
+		vh = (vh >> c);
+	}
+
+	return ((u64) vh << 32) + vl;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/parisc/lib/libgcc/__moddi3.c b/arch/parisc/lib/libgcc/__moddi3.c
new file mode 100644
index 0000000..ed64bba
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__moddi3.c
@@ -0,0 +1,23 @@
+#include "libgcc.h"
+
+s64 __moddi3(s64 num, s64 den)
+{
+	int minus = 0;
+	s64 v;
+
+	if (num < 0) {
+		num = -num;
+		minus = 1;
+	}
+	if (den < 0) {
+		den = -den;
+		minus ^= 1;
+	}
+
+	(void)__udivmoddi4(num, den, (u64 *) & v);
+	if (minus)
+		v = -v;
+
+	return v;
+}
+EXPORT_SYMBOL(__moddi3);
diff --git a/arch/parisc/lib/libgcc/__modsi3.c b/arch/parisc/lib/libgcc/__modsi3.c
new file mode 100644
index 0000000..62f773e
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__modsi3.c
@@ -0,0 +1,23 @@
+#include "libgcc.h"
+
+s32 __modsi3(s32 num, s32 den)
+{
+	int minus = 0;
+	s32 v;
+
+	if (num < 0) {
+		num = -num;
+		minus = 1;
+	}
+	if (den < 0) {
+		den = -den;
+		minus ^= 1;
+	}
+
+	(void)__udivmodsi4(num, den, (u32 *) & v);
+	if (minus)
+		v = -v;
+
+	return v;
+}
+EXPORT_SYMBOL(__modsi3);
diff --git a/arch/parisc/lib/libgcc/__muldi3.c b/arch/parisc/lib/libgcc/__muldi3.c
new file mode 100644
index 0000000..3308abd
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__muldi3.c
@@ -0,0 +1,22 @@
+#include "libgcc.h"
+
+union DWunion {
+	struct {
+		s32 high;
+		s32 low;
+	} s;
+	s64 ll;
+};
+
+s64 __muldi3(s64 u, s64 v)
+{
+	const union DWunion uu = { .ll = u };
+	const union DWunion vv = { .ll = v };
+	union DWunion w = { .ll = __umulsidi3(uu.s.low, vv.s.low) };
+
+	w.s.high += ((u32)uu.s.low * (u32)vv.s.high
+		+ (u32)uu.s.high * (u32)vv.s.low);
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__muldi3);
diff --git a/arch/parisc/lib/libgcc/__udivdi3.c b/arch/parisc/lib/libgcc/__udivdi3.c
new file mode 100644
index 0000000..740023d
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__udivdi3.c
@@ -0,0 +1,7 @@
+#include "libgcc.h"
+
+u64 __udivdi3(u64 num, u64 den)
+{
+	return __udivmoddi4(num, den, NULL);
+}
+EXPORT_SYMBOL(__udivdi3);
diff --git a/arch/parisc/lib/libgcc/__udivmoddi4.c b/arch/parisc/lib/libgcc/__udivmoddi4.c
new file mode 100644
index 0000000..2df0caa
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__udivmoddi4.c
@@ -0,0 +1,31 @@
+#include "libgcc.h"
+
+u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p)
+{
+	u64 quot = 0, qbit = 1;
+
+	if (den == 0) {
+		BUG();
+	}
+
+	/* Left-justify denominator and count shift */
+	while ((s64) den >= 0) {
+		den <<= 1;
+		qbit <<= 1;
+	}
+
+	while (qbit) {
+		if (den <= num) {
+			num -= den;
+			quot += qbit;
+		}
+		den >>= 1;
+		qbit >>= 1;
+	}
+
+	if (rem_p)
+		*rem_p = num;
+
+	return quot;
+}
+EXPORT_SYMBOL(__udivmoddi4);
diff --git a/arch/parisc/lib/libgcc/__udivmodsi4.c b/arch/parisc/lib/libgcc/__udivmodsi4.c
new file mode 100644
index 0000000..2a2fc28
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__udivmodsi4.c
@@ -0,0 +1,31 @@
+#include "libgcc.h"
+
+u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p)
+{
+	u32 quot = 0, qbit = 1;
+
+	if (den == 0) {
+		BUG();
+	}
+
+	/* Left-justify denominator and count shift */
+	while ((s32) den >= 0) {
+		den <<= 1;
+		qbit <<= 1;
+	}
+
+	while (qbit) {
+		if (den <= num) {
+			num -= den;
+			quot += qbit;
+		}
+		den >>= 1;
+		qbit >>= 1;
+	}
+
+	if (rem_p)
+		*rem_p = num;
+
+	return quot;
+}
+EXPORT_SYMBOL(__udivmodsi4);
diff --git a/arch/parisc/lib/libgcc/__udivsi3.c b/arch/parisc/lib/libgcc/__udivsi3.c
new file mode 100644
index 0000000..756a441
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__udivsi3.c
@@ -0,0 +1,7 @@
+#include "libgcc.h"
+
+u32 __udivsi3(u32 num, u32 den)
+{
+	return __udivmodsi4(num, den, NULL);
+}
+EXPORT_SYMBOL(__udivsi3);
diff --git a/arch/parisc/lib/libgcc/__umoddi3.c b/arch/parisc/lib/libgcc/__umoddi3.c
new file mode 100644
index 0000000..ac744e9
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__umoddi3.c
@@ -0,0 +1,10 @@
+#include "libgcc.h"
+
+u64 __umoddi3(u64 num, u64 den)
+{
+	u64 v;
+
+	(void)__udivmoddi4(num, den, &v);
+	return v;
+}
+EXPORT_SYMBOL(__umoddi3);
diff --git a/arch/parisc/lib/libgcc/__umodsi3.c b/arch/parisc/lib/libgcc/__umodsi3.c
new file mode 100644
index 0000000..51f55aa
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__umodsi3.c
@@ -0,0 +1,10 @@
+#include "libgcc.h"
+
+u32 __umodsi3(u32 num, u32 den)
+{
+	u32 v;
+
+	(void)__udivmodsi4(num, den, &v);
+	return v;
+}
+EXPORT_SYMBOL(__umodsi3);
diff --git a/arch/parisc/lib/libgcc/__umulsidi3.c b/arch/parisc/lib/libgcc/__umulsidi3.c
new file mode 100644
index 0000000..396f669
--- /dev/null
+++ b/arch/parisc/lib/libgcc/__umulsidi3.c
@@ -0,0 +1,46 @@
+#include "libgcc.h"
+
+#define __ll_B ((u32) 1 << (32 / 2))
+#define __ll_lowpart(t) ((u32) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((u32) (t) >> 16)
+
+#define umul_ppmm(w1, w0, u, v)						\
+  do {									\
+    u32 __x0, __x1, __x2, __x3;						\
+    u16 __ul, __vl, __uh, __vh;						\
+									\
+    __ul = __ll_lowpart (u);						\
+    __uh = __ll_highpart (u);						\
+    __vl = __ll_lowpart (v);						\
+    __vh = __ll_highpart (v);						\
+									\
+    __x0 = (u32) __ul * __vl;						\
+    __x1 = (u32) __ul * __vh;						\
+    __x2 = (u32) __uh * __vl;						\
+    __x3 = (u32) __uh * __vh;						\
+									\
+    __x1 += __ll_highpart (__x0);/* this can't give carry */		\
+    __x1 += __x2;		 /* but this indeed can */		\
+    if (__x1 < __x2)		 /* did we get it? */			\
+      __x3 += __ll_B;		 /* yes, add it in the proper pos.  */	\
+									\
+    (w1) = __x3 + __ll_highpart (__x1);					\
+    (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0);		\
+  } while (0)
+
+union DWunion {
+	struct {
+		s32 high;
+		s32 low;
+	} s;
+	s64 ll;
+};
+
+u64 __umulsidi3(u32 u, u32 v)
+{
+	union DWunion __w;
+
+	umul_ppmm(__w.s.high, __w.s.low, u, v);
+
+	return __w.ll;
+}
diff --git a/arch/parisc/lib/libgcc/libgcc.h b/arch/parisc/lib/libgcc/libgcc.h
new file mode 100644
index 0000000..5a6f7a5
--- /dev/null
+++ b/arch/parisc/lib/libgcc/libgcc.h
@@ -0,0 +1,32 @@
+#ifndef _PA_LIBGCC_H_
+#define _PA_LIBGCC_H_
+
+#include <linux/types.h>
+#include <linux/module.h>
+
+/* Cribbed from klibc/libgcc/ */
+u64 __ashldi3(u64 v, int cnt);
+u64 __ashrdi3(u64 v, int cnt);
+
+u32 __clzsi2(u32 v);
+
+s64 __divdi3(s64 num, s64 den);
+s32 __divsi3(s32 num, s32 den);
+
+u64 __lshrdi3(u64 v, int cnt);
+
+s64 __moddi3(s64 num, s64 den);
+s32 __modsi3(s32 num, s32 den);
+
+u64 __udivdi3(u64 num, u64 den);
+u32 __udivsi3(u32 num, u32 den);
+
+u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p);
+u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p);
+
+u64 __umulsidi3(u32 u, u32 v);
+
+u64 __umoddi3(u64 num, u64 den);
+u32 __umodsi3(u32 num, u32 den);
+
+#endif /*_PA_LIBGCC_H_*/
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index 2c43ebe..d22042d 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -139,12 +139,12 @@
 #define stw(_s,_t,_o,_a,_e) 	def_store_insn(stw,"r",_s,_t,_o,_a,_e)
 
 #ifdef  CONFIG_PREFETCH
-extern inline void prefetch_src(const void *addr)
+static inline void prefetch_src(const void *addr)
 {
 	__asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr));
 }
 
-extern inline void prefetch_dst(const void *addr)
+static inline void prefetch_dst(const void *addr)
 {
 	__asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr));
 }
diff --git a/arch/parisc/lib/milli/Makefile b/arch/parisc/lib/milli/Makefile
new file mode 100644
index 0000000..9b24e9b
--- /dev/null
+++ b/arch/parisc/lib/milli/Makefile
@@ -0,0 +1 @@
+obj-y	:= dyncall.o divI.o divU.o remI.o remU.o div_const.o mulI.o
diff --git a/arch/parisc/lib/milli/divI.S b/arch/parisc/lib/milli/divI.S
new file mode 100644
index 0000000..ac106b7
--- /dev/null
+++ b/arch/parisc/lib/milli/divI.S
@@ -0,0 +1,254 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_divI
+/* ROUTINES:	$$divI, $$divoI
+
+   Single precision divide for signed binary integers.
+
+   The quotient is truncated towards zero.
+   The sign of the quotient is the XOR of the signs of the dividend and
+   divisor.
+   Divide by zero is trapped.
+   Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	arg1 ==	divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	quotient
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:
+   .		divisor is zero  (traps with ADDIT,=  0,25,0)
+   .		dividend==-2**31  and divisor==-1 and routine is $$divoI
+   .				 (traps with ADDO  26,25,0)
+   .	Changes memory at the following places:
+   .		NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Branchs to other millicode routines using BE
+   .		$$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
+   .
+   .	For selected divisors, calls a divide by constant routine written by
+   .	Karl Pettis.  Eligible divisors are 1..15 excluding 11 and 13.
+   .
+   .	The only overflow case is -2**31 divided by -1.
+   .	Both routines return -2**31 but only $$divoI traps.  */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1)	/*  r29 */
+RDEFINE(temp1,arg0)
+	SUBSPA_MILLI_DIV
+	ATTR_MILLI
+	.import $$divI_2,millicode
+	.import $$divI_3,millicode
+	.import $$divI_4,millicode
+	.import $$divI_5,millicode
+	.import $$divI_6,millicode
+	.import $$divI_7,millicode
+	.import $$divI_8,millicode
+	.import $$divI_9,millicode
+	.import $$divI_10,millicode
+	.import $$divI_12,millicode
+	.import $$divI_14,millicode
+	.import $$divI_15,millicode
+	.export $$divI,millicode
+	.export	$$divoI,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+GSYM($$divoI)
+	comib,=,n  -1,arg1,LREF(negative1)	/*  when divisor == -1 */
+GSYM($$divI)
+	ldo	-1(arg1),temp		/*  is there at most one bit set ? */
+	and,<>	arg1,temp,r0		/*  if not, don't use power of 2 divide */
+	addi,>	0,arg1,r0		/*  if divisor > 0, use power of 2 divide */
+	b,n	LREF(neg_denom)
+LSYM(pow2)
+	addi,>=	0,arg0,retreg		/*  if numerator is negative, add the */
+	add	arg0,temp,retreg	/*  (denominaotr -1) to correct for shifts */
+	extru,=	arg1,15,16,temp		/*  test denominator with 0xffff0000 */
+	extrs	retreg,15,16,retreg	/*  retreg = retreg >> 16 */
+	or	arg1,temp,arg1		/*  arg1 = arg1 | (arg1 >> 16) */
+	ldi	0xcc,temp1		/*  setup 0xcc in temp1 */
+	extru,= arg1,23,8,temp		/*  test denominator with 0xff00 */
+	extrs	retreg,23,24,retreg	/*  retreg = retreg >> 8 */
+	or	arg1,temp,arg1		/*  arg1 = arg1 | (arg1 >> 8) */
+	ldi	0xaa,temp		/*  setup 0xaa in temp */
+	extru,= arg1,27,4,r0		/*  test denominator with 0xf0 */
+	extrs	retreg,27,28,retreg	/*  retreg = retreg >> 4 */
+	and,=	arg1,temp1,r0		/*  test denominator with 0xcc */
+	extrs	retreg,29,30,retreg	/*  retreg = retreg >> 2 */
+	and,=	arg1,temp,r0		/*  test denominator with 0xaa */
+	extrs	retreg,30,31,retreg	/*  retreg = retreg >> 1 */
+	MILLIRETN
+LSYM(neg_denom)
+	addi,<	0,arg1,r0		/*  if arg1 >= 0, it's not power of 2 */
+	b,n	LREF(regular_seq)
+	sub	r0,arg1,temp		/*  make denominator positive */
+	comb,=,n  arg1,temp,LREF(regular_seq)	/*  test against 0x80000000 and 0 */
+	ldo	-1(temp),retreg		/*  is there at most one bit set ? */
+	and,=	temp,retreg,r0		/*  if so, the denominator is power of 2 */
+	b,n	LREF(regular_seq)
+	sub	r0,arg0,retreg		/*  negate numerator */
+	comb,=,n arg0,retreg,LREF(regular_seq) /*  test against 0x80000000 */
+	copy	retreg,arg0		/*  set up arg0, arg1 and temp	*/
+	copy	temp,arg1		/*  before branching to pow2 */
+	b	LREF(pow2)
+	ldo	-1(arg1),temp
+LSYM(regular_seq)
+	comib,>>=,n 15,arg1,LREF(small_divisor)
+	add,>=	0,arg0,retreg		/*  move dividend, if retreg < 0, */
+LSYM(normal)
+	subi	0,retreg,retreg		/*    make it positive */
+	sub	0,arg1,temp		/*  clear carry,  */
+					/*    negate the divisor */
+	ds	0,temp,0		/*  set V-bit to the comple- */
+					/*    ment of the divisor sign */
+	add	retreg,retreg,retreg	/*  shift msb bit into carry */
+	ds	r0,arg1,temp		/*  1st divide step, if no carry */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  2nd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  3rd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  4th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  5th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  6th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  7th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  8th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  9th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  10th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  11th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  12th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  13th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  14th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  15th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  16th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  17th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  18th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  19th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  20th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  21st divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  22nd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  23rd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  24th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  25th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  26th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  27th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  28th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  29th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  30th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  31st divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  32nd divide step, */
+	addc	retreg,retreg,retreg	/*  shift last retreg bit into retreg */
+	xor,>=	arg0,arg1,0		/*  get correct sign of quotient */
+	  sub	0,retreg,retreg		/*    based on operand signs */
+	MILLIRETN
+	nop
+
+LSYM(small_divisor)
+
+#if defined(CONFIG_64BIT)
+/*  Clear the upper 32 bits of the arg1 register.  We are working with	*/
+/*  small divisors (and 32-bit integers)   We must not be mislead  */
+/*  by "1" bits left in the upper 32 bits.  */
+	depd %r0,31,32,%r25
+#endif
+	blr,n	arg1,r0
+	nop
+/*  table for divisor == 0,1, ... ,15 */
+	addit,=	0,arg1,r0	/*  trap if divisor == 0 */
+	nop
+	MILLIRET		/*  divisor == 1 */
+	copy	arg0,retreg
+	MILLI_BEN($$divI_2)	/*  divisor == 2 */
+	nop
+	MILLI_BEN($$divI_3)	/*  divisor == 3 */
+	nop
+	MILLI_BEN($$divI_4)	/*  divisor == 4 */
+	nop
+	MILLI_BEN($$divI_5)	/*  divisor == 5 */
+	nop
+	MILLI_BEN($$divI_6)	/*  divisor == 6 */
+	nop
+	MILLI_BEN($$divI_7)	/*  divisor == 7 */
+	nop
+	MILLI_BEN($$divI_8)	/*  divisor == 8 */
+	nop
+	MILLI_BEN($$divI_9)	/*  divisor == 9 */
+	nop
+	MILLI_BEN($$divI_10)	/*  divisor == 10 */
+	nop
+	b	LREF(normal)		/*  divisor == 11 */
+	add,>=	0,arg0,retreg
+	MILLI_BEN($$divI_12)	/*  divisor == 12 */
+	nop
+	b	LREF(normal)		/*  divisor == 13 */
+	add,>=	0,arg0,retreg
+	MILLI_BEN($$divI_14)	/*  divisor == 14 */
+	nop
+	MILLI_BEN($$divI_15)	/*  divisor == 15 */
+	nop
+
+LSYM(negative1)
+	sub	0,arg0,retreg	/*  result is negation of dividend */
+	MILLIRET
+	addo	arg0,arg1,r0	/*  trap iff dividend==0x80000000 && divisor==-1 */
+	.exit
+	.procend
+	.end
+#endif
diff --git a/arch/parisc/lib/milli/divU.S b/arch/parisc/lib/milli/divU.S
new file mode 100644
index 0000000..9287fe2
--- /dev/null
+++ b/arch/parisc/lib/milli/divU.S
@@ -0,0 +1,235 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_divU
+/* ROUTINE:	$$divU
+   .
+   .	Single precision divide for unsigned integers.
+   .
+   .	Quotient is truncated towards zero.
+   .	Traps on divide by zero.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	arg1 ==	divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	quotient
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:
+   .		divisor is zero
+   .	Changes memory at the following places:
+   .		NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Does not create a stack frame.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Branchs to other millicode routines using BE:
+   .		$$divU_# for 3,5,6,7,9,10,12,14,15
+   .
+   .	For selected small divisors calls the special divide by constant
+   .	routines written by Karl Pettis.  These are: 3,5,6,7,9,10,12,14,15.  */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1)	/* r29 */
+RDEFINE(temp1,arg0)
+	SUBSPA_MILLI_DIV
+	ATTR_MILLI
+	.export $$divU,millicode
+	.import $$divU_3,millicode
+	.import $$divU_5,millicode
+	.import $$divU_6,millicode
+	.import $$divU_7,millicode
+	.import $$divU_9,millicode
+	.import $$divU_10,millicode
+	.import $$divU_12,millicode
+	.import $$divU_14,millicode
+	.import $$divU_15,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+GSYM($$divU)
+/* The subtract is not nullified since it does no harm and can be used
+   by the two cases that branch back to "normal".  */
+	ldo	-1(arg1),temp		/* is there at most one bit set ? */
+	and,=	arg1,temp,r0		/* if so, denominator is power of 2 */
+	b	LREF(regular_seq)
+	addit,=	0,arg1,0		/* trap for zero dvr */
+	copy	arg0,retreg
+	extru,= arg1,15,16,temp		/* test denominator with 0xffff0000 */
+	extru	retreg,15,16,retreg	/* retreg = retreg >> 16 */
+	or	arg1,temp,arg1		/* arg1 = arg1 | (arg1 >> 16) */
+	ldi	0xcc,temp1		/* setup 0xcc in temp1 */
+	extru,= arg1,23,8,temp		/* test denominator with 0xff00 */
+	extru	retreg,23,24,retreg	/* retreg = retreg >> 8 */
+	or	arg1,temp,arg1		/* arg1 = arg1 | (arg1 >> 8) */
+	ldi	0xaa,temp		/* setup 0xaa in temp */
+	extru,= arg1,27,4,r0		/* test denominator with 0xf0 */
+	extru	retreg,27,28,retreg	/* retreg = retreg >> 4 */
+	and,=	arg1,temp1,r0		/* test denominator with 0xcc */
+	extru	retreg,29,30,retreg	/* retreg = retreg >> 2 */
+	and,=	arg1,temp,r0		/* test denominator with 0xaa */
+	extru	retreg,30,31,retreg	/* retreg = retreg >> 1 */
+	MILLIRETN
+	nop	
+LSYM(regular_seq)
+	comib,>=  15,arg1,LREF(special_divisor)
+	subi	0,arg1,temp		/* clear carry, negate the divisor */
+	ds	r0,temp,r0		/* set V-bit to 1 */
+LSYM(normal)
+	add	arg0,arg0,retreg	/* shift msb bit into carry */
+	ds	r0,arg1,temp		/* 1st divide step, if no carry */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 2nd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 3rd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 4th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 5th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 6th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 7th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 8th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 9th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 10th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 11th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 12th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 13th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 14th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 15th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 16th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 17th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 18th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 19th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 20th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 21st divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 22nd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 23rd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 24th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 25th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 26th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 27th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 28th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 29th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 30th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 31st divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 32nd divide step, */
+	MILLIRET
+	addc	retreg,retreg,retreg	/* shift last retreg bit into retreg */
+
+/* Handle the cases where divisor is a small constant or has high bit on.  */
+LSYM(special_divisor)
+/*	blr	arg1,r0 */
+/*	comib,>,n  0,arg1,LREF(big_divisor) ; nullify previous instruction */
+
+/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
+   generating such a blr, comib sequence. A problem in nullification. So I
+   rewrote this code.  */
+
+#if defined(CONFIG_64BIT)
+/* Clear the upper 32 bits of the arg1 register.  We are working with
+   small divisors (and 32-bit unsigned integers)   We must not be mislead
+   by "1" bits left in the upper 32 bits.  */
+	depd %r0,31,32,%r25
+#endif
+	comib,>	0,arg1,LREF(big_divisor)
+	nop
+	blr	arg1,r0
+	nop
+
+LSYM(zero_divisor)	/* this label is here to provide external visibility */
+	addit,=	0,arg1,0		/* trap for zero dvr */
+	nop
+	MILLIRET			/* divisor == 1 */
+	copy	arg0,retreg
+	MILLIRET			/* divisor == 2 */
+	extru	arg0,30,31,retreg
+	MILLI_BEN($$divU_3)		/* divisor == 3 */
+	nop
+	MILLIRET			/* divisor == 4 */
+	extru	arg0,29,30,retreg
+	MILLI_BEN($$divU_5)		/* divisor == 5 */
+	nop
+	MILLI_BEN($$divU_6)		/* divisor == 6 */
+	nop
+	MILLI_BEN($$divU_7)		/* divisor == 7 */
+	nop
+	MILLIRET			/* divisor == 8 */
+	extru	arg0,28,29,retreg
+	MILLI_BEN($$divU_9)		/* divisor == 9 */
+	nop
+	MILLI_BEN($$divU_10)		/* divisor == 10 */
+	nop
+	b	LREF(normal)		/* divisor == 11 */
+	ds	r0,temp,r0		/* set V-bit to 1 */
+	MILLI_BEN($$divU_12)		/* divisor == 12 */
+	nop
+	b	LREF(normal)		/* divisor == 13 */
+	ds	r0,temp,r0		/* set V-bit to 1 */
+	MILLI_BEN($$divU_14)		/* divisor == 14 */
+	nop
+	MILLI_BEN($$divU_15)		/* divisor == 15 */
+	nop
+
+/* Handle the case where the high bit is on in the divisor.
+   Compute:	if( dividend>=divisor) quotient=1; else quotient=0;
+   Note:	dividend>==divisor iff dividend-divisor does not borrow
+   and		not borrow iff carry.  */
+LSYM(big_divisor)
+	sub	arg0,arg1,r0
+	MILLIRET
+	addc	r0,r0,retreg
+	.exit
+	.procend
+	.end
+#endif
diff --git a/arch/parisc/lib/milli/div_const.S b/arch/parisc/lib/milli/div_const.S
new file mode 100644
index 0000000..dd66007
--- /dev/null
+++ b/arch/parisc/lib/milli/div_const.S
@@ -0,0 +1,682 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_div_const
+/* ROUTINE:	$$divI_2
+   .		$$divI_3	$$divU_3
+   .		$$divI_4
+   .		$$divI_5	$$divU_5
+   .		$$divI_6	$$divU_6
+   .		$$divI_7	$$divU_7
+   .		$$divI_8
+   .		$$divI_9	$$divU_9
+   .		$$divI_10	$$divU_10
+   .
+   .		$$divI_12	$$divU_12
+   .
+   .		$$divI_14	$$divU_14
+   .		$$divI_15	$$divU_15
+   .		$$divI_16
+   .		$$divI_17	$$divU_17
+   .
+   .	Divide by selected constants for single precision binary integers.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	quotient
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions: NONE
+   .	Changes memory at the following places:  NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Does not create a stack frame.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Calls other millicode routines using mrp:  NONE
+   .	Calls other millicode routines:  NONE  */
+
+
+/* TRUNCATED DIVISION BY SMALL INTEGERS
+
+   We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
+   (with y fixed).
+
+   Let a = floor(z/y), for some choice of z.  Note that z will be
+   chosen so that division by z is cheap.
+
+   Let r be the remainder(z/y).  In other words, r = z - ay.
+
+   Now, our method is to choose a value for b such that
+
+   q'(x) = floor((ax+b)/z)
+
+   is equal to q(x) over as large a range of x as possible.  If the
+   two are equal over a sufficiently large range, and if it is easy to
+   form the product (ax), and it is easy to divide by z, then we can
+   perform the division much faster than the general division algorithm.
+
+   So, we want the following to be true:
+
+   .	For x in the following range:
+   .
+   .	    ky <= x < (k+1)y
+   .
+   .	implies that
+   .
+   .	    k <= (ax+b)/z < (k+1)
+
+   We want to determine b such that this is true for all k in the
+   range {0..K} for some maximum K.
+
+   Since (ax+b) is an increasing function of x, we can take each
+   bound separately to determine the "best" value for b.
+
+   (ax+b)/z < (k+1)	       implies
+
+   (a((k+1)y-1)+b < (k+1)z     implies
+
+   b < a + (k+1)(z-ay)	       implies
+
+   b < a + (k+1)r
+
+   This needs to be true for all k in the range {0..K}.  In
+   particular, it is true for k = 0 and this leads to a maximum
+   acceptable value for b.
+
+   b < a+r   or   b <= a+r-1
+
+   Taking the other bound, we have
+
+   k <= (ax+b)/z	       implies
+
+   k <= (aky+b)/z	       implies
+
+   k(z-ay) <= b		       implies
+
+   kr <= b
+
+   Clearly, the largest range for k will be achieved by maximizing b,
+   when r is not zero.	When r is zero, then the simplest choice for b
+   is 0.  When r is not 0, set
+
+   .	b = a+r-1
+
+   Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
+   for all x in the range:
+
+   .	0 <= x < (K+1)y
+
+   We need to determine what K is.  Of our two bounds,
+
+   .	b < a+(k+1)r	is satisfied for all k >= 0, by construction.
+
+   The other bound is
+
+   .	kr <= b
+
+   This is always true if r = 0.  If r is not 0 (the usual case), then
+   K = floor((a+r-1)/r), is the maximum value for k.
+
+   Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
+   answer for q(x) = floor(x/y) when x is in the range
+
+   (0,(K+1)y-1)	       K = floor((a+r-1)/r)
+
+   To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
+   the formula for q'(x) yields the correct value of q(x) for all x
+   representable by a single word in HPPA.
+
+   We are also constrained in that computing the product (ax), adding
+   b, and dividing by z must all be done quickly, otherwise we will be
+   better off going through the general algorithm using the DS
+   instruction, which uses approximately 70 cycles.
+
+   For each y, there is a choice of z which satisfies the constraints
+   for (K+1)y >= 2**32.  We may not, however, be able to satisfy the
+   timing constraints for arbitrary y.	It seems that z being equal to
+   a power of 2 or a power of 2 minus 1 is as good as we can do, since
+   it minimizes the time to do division by z.  We want the choice of z
+   to also result in a value for (a) that minimizes the computation of
+   the product (ax).  This is best achieved if (a) has a regular bit
+   pattern (so the multiplication can be done with shifts and adds).
+   The value of (a) also needs to be less than 2**32 so the product is
+   always guaranteed to fit in 2 words.
+
+   In actual practice, the following should be done:
+
+   1) For negative x, you should take the absolute value and remember
+   .  the fact so that the result can be negated.  This obviously does
+   .  not apply in the unsigned case.
+   2) For even y, you should factor out the power of 2 that divides y
+   .  and divide x by it.  You can then proceed by dividing by the
+   .  odd factor of y.
+
+   Here is a table of some odd values of y, and corresponding choices
+   for z which are "good".
+
+    y	  z	  r	 a (hex)     max x (hex)
+
+    3	2**32	  1	55555555      100000001
+    5	2**32	  1	33333333      100000003
+    7  2**24-1	  0	  249249     (infinite)
+    9  2**24-1	  0	  1c71c7     (infinite)
+   11  2**20-1	  0	   1745d     (infinite)
+   13  2**24-1	  0	  13b13b     (infinite)
+   15	2**32	  1	11111111      10000000d
+   17	2**32	  1	 f0f0f0f      10000000f
+
+   If r is 1, then b = a+r-1 = a.  This simplifies the computation
+   of (ax+b), since you can compute (x+1)(a) instead.  If r is 0,
+   then b = 0 is ok to use which simplifies (ax+b).
+
+   The bit patterns for 55555555, 33333333, and 11111111 are obviously
+   very regular.  The bit patterns for the other values of a above are:
+
+    y	   (hex)	  (binary)
+
+    7	  249249  001001001001001001001001  << regular >>
+    9	  1c71c7  000111000111000111000111  << regular >>
+   11	   1745d  000000010111010001011101  << irregular >>
+   13	  13b13b  000100111011000100111011  << irregular >>
+
+   The bit patterns for (a) corresponding to (y) of 11 and 13 may be
+   too irregular to warrant using this method.
+
+   When z is a power of 2 minus 1, then the division by z is slightly
+   more complicated, involving an iterative solution.
+
+   The code presented here solves division by 1 through 17, except for
+   11 and 13. There are algorithms for both signed and unsigned
+   quantities given.
+
+   TIMINGS (cycles)
+
+   divisor  positive  negative	unsigned
+
+   .   1	2	   2	     2
+   .   2	4	   4	     2
+   .   3       19	  21	    19
+   .   4	4	   4	     2
+   .   5       18	  22	    19
+   .   6       19	  22	    19
+   .   8	4	   4	     2
+   .  10       18	  19	    17
+   .  12       18	  20	    18
+   .  15       16	  18	    16
+   .  16	4	   4	     2
+   .  17       16	  18	    16
+
+   Now, the algorithm for 7, 9, and 14 is an iterative one.  That is,
+   a loop body is executed until the tentative quotient is 0.  The
+   number of times the loop body is executed varies depending on the
+   dividend, but is never more than two times.	If the dividend is
+   less than the divisor, then the loop body is not executed at all.
+   Each iteration adds 4 cycles to the timings.
+
+   divisor  positive  negative	unsigned
+
+   .   7       19+4n	 20+4n	   20+4n    n = number of iterations
+   .   9       21+4n	 22+4n	   21+4n
+   .  14       21+4n	 22+4n	   20+4n
+
+   To give an idea of how the number of iterations varies, here is a
+   table of dividend versus number of iterations when dividing by 7.
+
+   smallest	 largest       required
+   dividend	dividend      iterations
+
+   .	0	     6		    0
+   .	7	 0x6ffffff	    1
+   0x1000006	0xffffffff	    2
+
+   There is some overlap in the range of numbers requiring 1 and 2
+   iterations.	*/
+
+RDEFINE(t2,r1)
+RDEFINE(x2,arg0)	/*  r26 */
+RDEFINE(t1,arg1)	/*  r25 */
+RDEFINE(x1,ret1)	/*  r29 */
+
+	SUBSPA_MILLI_DIV
+	ATTR_MILLI
+
+	.proc
+	.callinfo	millicode
+	.entry
+/* NONE of these routines require a stack frame
+   ALL of these routines are unwindable from millicode	*/
+
+GSYM($$divide_by_constant)
+	.export $$divide_by_constant,millicode
+/*  Provides a "nice" label for the code covered by the unwind descriptor
+    for things like gprof.  */
+
+/* DIVISION BY 2 (shift by 1) */
+GSYM($$divI_2)
+	.export		$$divI_2,millicode
+	comclr,>=	arg0,0,0
+	addi		1,arg0,arg0
+	MILLIRET
+	extrs		arg0,30,31,ret1
+
+
+/* DIVISION BY 4 (shift by 2) */
+GSYM($$divI_4)
+	.export		$$divI_4,millicode
+	comclr,>=	arg0,0,0
+	addi		3,arg0,arg0
+	MILLIRET
+	extrs		arg0,29,30,ret1
+
+
+/* DIVISION BY 8 (shift by 3) */
+GSYM($$divI_8)
+	.export		$$divI_8,millicode
+	comclr,>=	arg0,0,0
+	addi		7,arg0,arg0
+	MILLIRET
+	extrs		arg0,28,29,ret1
+
+/* DIVISION BY 16 (shift by 4) */
+GSYM($$divI_16)
+	.export		$$divI_16,millicode
+	comclr,>=	arg0,0,0
+	addi		15,arg0,arg0
+	MILLIRET
+	extrs		arg0,27,28,ret1
+
+/****************************************************************************
+*
+*	DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
+*
+*	includes 3,5,15,17 and also 6,10,12
+*
+****************************************************************************/
+
+/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
+
+GSYM($$divI_3)
+	.export		$$divI_3,millicode
+	comb,<,N	x2,0,LREF(neg3)
+
+	addi		1,x2,x2		/* this cannot overflow	*/
+	extru		x2,1,2,x1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(pos)
+	addc		x1,0,x1
+
+LSYM(neg3)
+	subi		1,x2,x2		/* this cannot overflow	*/
+	extru		x2,1,2,x1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(neg)
+	addc		x1,0,x1
+
+GSYM($$divU_3)
+	.export		$$divU_3,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	addc		0,0,x1
+	shd		x1,x2,30,t1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(pos)
+	addc		x1,t1,x1
+
+/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
+
+GSYM($$divI_5)
+	.export		$$divI_5,millicode
+	comb,<,N	x2,0,LREF(neg5)
+
+	addi		3,x2,t1		/* this cannot overflow	*/
+	sh1add		x2,t1,x2	/* multiply by 3 to get started */
+	b		LREF(pos)
+	addc		0,0,x1
+
+LSYM(neg5)
+	sub		0,x2,x2		/* negate x2			*/
+	addi		1,x2,x2		/* this cannot overflow	*/
+	shd		0,x2,31,x1	/* get top bit (can be 1)	*/
+	sh1add		x2,x2,x2	/* multiply by 3 to get started */
+	b		LREF(neg)
+	addc		x1,0,x1
+
+GSYM($$divU_5)
+	.export		$$divU_5,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	addc		0,0,x1
+	shd		x1,x2,31,t1	/* multiply by 3 to get started */
+	sh1add		x2,x2,x2
+	b		LREF(pos)
+	addc		t1,x1,x1
+
+/* DIVISION BY	6 (shift to divide by 2 then divide by 3) */
+GSYM($$divI_6)
+	.export		$$divI_6,millicode
+	comb,<,N	x2,0,LREF(neg6)
+	extru		x2,30,31,x2	/* divide by 2			*/
+	addi		5,x2,t1		/* compute 5*(x2+1) = 5*x2+5	*/
+	sh2add		x2,t1,x2	/* multiply by 5 to get started */
+	b		LREF(pos)
+	addc		0,0,x1
+
+LSYM(neg6)
+	subi		2,x2,x2		/* negate, divide by 2, and add 1 */
+					/* negation and adding 1 are done */
+					/* at the same time by the SUBI   */
+	extru		x2,30,31,x2
+	shd		0,x2,30,x1
+	sh2add		x2,x2,x2	/* multiply by 5 to get started */
+	b		LREF(neg)
+	addc		x1,0,x1
+
+GSYM($$divU_6)
+	.export		$$divU_6,millicode
+	extru		x2,30,31,x2	/* divide by 2 */
+	addi		1,x2,x2		/* cannot carry */
+	shd		0,x2,30,x1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(pos)
+	addc		x1,0,x1
+
+/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
+GSYM($$divU_10)
+	.export		$$divU_10,millicode
+	extru		x2,30,31,x2	/* divide by 2 */
+	addi		3,x2,t1		/* compute 3*(x2+1) = (3*x2)+3	*/
+	sh1add		x2,t1,x2	/* multiply by 3 to get started */
+	addc		0,0,x1
+LSYM(pos)
+	shd		x1,x2,28,t1	/* multiply by 0x11 */
+	shd		x2,0,28,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+LSYM(pos_for_17)
+	shd		x1,x2,24,t1	/* multiply by 0x101 */
+	shd		x2,0,24,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,16,t1	/* multiply by 0x10001 */
+	shd		x2,0,16,t2
+	add		x2,t2,x2
+	MILLIRET
+	addc		x1,t1,x1
+
+GSYM($$divI_10)
+	.export		$$divI_10,millicode
+	comb,<		x2,0,LREF(neg10)
+	copy		0,x1
+	extru		x2,30,31,x2	/* divide by 2 */
+	addib,TR	1,x2,LREF(pos)	/* add 1 (cannot overflow)     */
+	sh1add		x2,x2,x2	/* multiply by 3 to get started */
+
+LSYM(neg10)
+	subi		2,x2,x2		/* negate, divide by 2, and add 1 */
+					/* negation and adding 1 are done */
+					/* at the same time by the SUBI   */
+	extru		x2,30,31,x2
+	sh1add		x2,x2,x2	/* multiply by 3 to get started */
+LSYM(neg)
+	shd		x1,x2,28,t1	/* multiply by 0x11 */
+	shd		x2,0,28,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+LSYM(neg_for_17)
+	shd		x1,x2,24,t1	/* multiply by 0x101 */
+	shd		x2,0,24,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,16,t1	/* multiply by 0x10001 */
+	shd		x2,0,16,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+	MILLIRET
+	sub		0,x1,x1
+
+/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
+GSYM($$divI_12)
+	.export		$$divI_12,millicode
+	comb,<		x2,0,LREF(neg12)
+	copy		0,x1
+	extru		x2,29,30,x2	/* divide by 4			*/
+	addib,tr	1,x2,LREF(pos)	/* compute 5*(x2+1) = 5*x2+5    */
+	sh2add		x2,x2,x2	/* multiply by 5 to get started */
+
+LSYM(neg12)
+	subi		4,x2,x2		/* negate, divide by 4, and add 1 */
+					/* negation and adding 1 are done */
+					/* at the same time by the SUBI   */
+	extru		x2,29,30,x2
+	b		LREF(neg)
+	sh2add		x2,x2,x2	/* multiply by 5 to get started */
+
+GSYM($$divU_12)
+	.export		$$divU_12,millicode
+	extru		x2,29,30,x2	/* divide by 4   */
+	addi		5,x2,t1		/* cannot carry */
+	sh2add		x2,t1,x2	/* multiply by 5 to get started */
+	b		LREF(pos)
+	addc		0,0,x1
+
+/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
+GSYM($$divI_15)
+	.export		$$divI_15,millicode
+	comb,<		x2,0,LREF(neg15)
+	copy		0,x1
+	addib,tr	1,x2,LREF(pos)+4
+	shd		x1,x2,28,t1
+
+LSYM(neg15)
+	b		LREF(neg)
+	subi		1,x2,x2
+
+GSYM($$divU_15)
+	.export		$$divU_15,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	b		LREF(pos)
+	addc		0,0,x1
+
+/* DIVISION BY 17 (use z = 2**32; a =  f0f0f0f) */
+GSYM($$divI_17)
+	.export		$$divI_17,millicode
+	comb,<,n	x2,0,LREF(neg17)
+	addi		1,x2,x2		/* this cannot overflow */
+	shd		0,x2,28,t1	/* multiply by 0xf to get started */
+	shd		x2,0,28,t2
+	sub		t2,x2,x2
+	b		LREF(pos_for_17)
+	subb		t1,0,x1
+
+LSYM(neg17)
+	subi		1,x2,x2		/* this cannot overflow */
+	shd		0,x2,28,t1	/* multiply by 0xf to get started */
+	shd		x2,0,28,t2
+	sub		t2,x2,x2
+	b		LREF(neg_for_17)
+	subb		t1,0,x1
+
+GSYM($$divU_17)
+	.export		$$divU_17,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	addc		0,0,x1
+	shd		x1,x2,28,t1	/* multiply by 0xf to get started */
+LSYM(u17)
+	shd		x2,0,28,t2
+	sub		t2,x2,x2
+	b		LREF(pos_for_17)
+	subb		t1,x1,x1
+
+
+/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
+   includes 7,9 and also 14
+
+
+   z = 2**24-1
+   r = z mod x = 0
+
+   so choose b = 0
+
+   Also, in order to divide by z = 2**24-1, we approximate by dividing
+   by (z+1) = 2**24 (which is easy), and then correcting.
+
+   (ax) = (z+1)q' + r
+   .	= zq' + (q'+r)
+
+   So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
+   Then the true remainder of (ax)/z is (q'+r).  Repeat the process
+   with this new remainder, adding the tentative quotients together,
+   until a tentative quotient is 0 (and then we are done).  There is
+   one last correction to be done.  It is possible that (q'+r) = z.
+   If so, then (q'+r)/(z+1) = 0 and it looks like we are done.	But,
+   in fact, we need to add 1 more to the quotient.  Now, it turns
+   out that this happens if and only if the original value x is
+   an exact multiple of y.  So, to avoid a three instruction test at
+   the end, instead use 1 instruction to add 1 to x at the beginning.  */
+
+/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
+GSYM($$divI_7)
+	.export		$$divI_7,millicode
+	comb,<,n	x2,0,LREF(neg7)
+LSYM(7)
+	addi		1,x2,x2		/* cannot overflow */
+	shd		0,x2,29,x1
+	sh3add		x2,x2,x2
+	addc		x1,0,x1
+LSYM(pos7)
+	shd		x1,x2,26,t1
+	shd		x2,0,26,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,20,t1
+	shd		x2,0,20,t2
+	add		x2,t2,x2
+	addc		x1,t1,t1
+
+	/* computed <t1,x2>.  Now divide it by (2**24 - 1)	*/
+
+	copy		0,x1
+	shd,=		t1,x2,24,t1	/* tentative quotient  */
+LSYM(1)
+	addb,tr		t1,x1,LREF(2)	/* add to previous quotient   */
+	extru		x2,31,24,x2	/* new remainder (unadjusted) */
+
+	MILLIRETN
+
+LSYM(2)
+	addb,tr		t1,x2,LREF(1)	/* adjust remainder */
+	extru,=		x2,7,8,t1	/* new quotient     */
+
+LSYM(neg7)
+	subi		1,x2,x2		/* negate x2 and add 1 */
+LSYM(8)
+	shd		0,x2,29,x1
+	sh3add		x2,x2,x2
+	addc		x1,0,x1
+
+LSYM(neg7_shift)
+	shd		x1,x2,26,t1
+	shd		x2,0,26,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,20,t1
+	shd		x2,0,20,t2
+	add		x2,t2,x2
+	addc		x1,t1,t1
+
+	/* computed <t1,x2>.  Now divide it by (2**24 - 1)	*/
+
+	copy		0,x1
+	shd,=		t1,x2,24,t1	/* tentative quotient  */
+LSYM(3)
+	addb,tr		t1,x1,LREF(4)	/* add to previous quotient   */
+	extru		x2,31,24,x2	/* new remainder (unadjusted) */
+
+	MILLIRET
+	sub		0,x1,x1		/* negate result    */
+
+LSYM(4)
+	addb,tr		t1,x2,LREF(3)	/* adjust remainder */
+	extru,=		x2,7,8,t1	/* new quotient     */
+
+GSYM($$divU_7)
+	.export		$$divU_7,millicode
+	addi		1,x2,x2		/* can carry */
+	addc		0,0,x1
+	shd		x1,x2,29,t1
+	sh3add		x2,x2,x2
+	b		LREF(pos7)
+	addc		t1,x1,x1
+
+/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
+GSYM($$divI_9)
+	.export		$$divI_9,millicode
+	comb,<,n	x2,0,LREF(neg9)
+	addi		1,x2,x2		/* cannot overflow */
+	shd		0,x2,29,t1
+	shd		x2,0,29,t2
+	sub		t2,x2,x2
+	b		LREF(pos7)
+	subb		t1,0,x1
+
+LSYM(neg9)
+	subi		1,x2,x2		/* negate and add 1 */
+	shd		0,x2,29,t1
+	shd		x2,0,29,t2
+	sub		t2,x2,x2
+	b		LREF(neg7_shift)
+	subb		t1,0,x1
+
+GSYM($$divU_9)
+	.export		$$divU_9,millicode
+	addi		1,x2,x2		/* can carry */
+	addc		0,0,x1
+	shd		x1,x2,29,t1
+	shd		x2,0,29,t2
+	sub		t2,x2,x2
+	b		LREF(pos7)
+	subb		t1,x1,x1
+
+/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
+GSYM($$divI_14)
+	.export		$$divI_14,millicode
+	comb,<,n	x2,0,LREF(neg14)
+GSYM($$divU_14)
+	.export		$$divU_14,millicode
+	b		LREF(7)		/* go to 7 case */
+	extru		x2,30,31,x2	/* divide by 2  */
+
+LSYM(neg14)
+	subi		2,x2,x2		/* negate (and add 2) */
+	b		LREF(8)
+	extru		x2,30,31,x2	/* divide by 2	      */
+	.exit
+	.procend
+	.end
+#endif
diff --git a/arch/parisc/lib/milli/dyncall.S b/arch/parisc/lib/milli/dyncall.S
new file mode 100644
index 0000000..27f9ca5
--- /dev/null
+++ b/arch/parisc/lib/milli/dyncall.S
@@ -0,0 +1,32 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_dyncall
+	SUBSPA_MILLI
+	ATTR_DATA
+GSYM($$dyncall)
+	.export $$dyncall,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+	bb,>=,n %r22,30,LREF(1)		; branch if not plabel address
+	depi	0,31,2,%r22		; clear the two least significant bits
+	ldw	4(%r22),%r19		; load new LTP value
+	ldw	0(%r22),%r22		; load address of target
+LSYM(1)
+	bv	%r0(%r22)		; branch to the real target
+	stw	%r2,-24(%r30)		; save return address into frame marker
+	.exit
+	.procend
+#endif
diff --git a/arch/parisc/lib/milli/milli.S b/arch/parisc/lib/milli/milli.S
new file mode 100644
index 0000000..47c6cde
--- /dev/null
+++ b/arch/parisc/lib/milli/milli.S
@@ -0,0 +1,2071 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#ifdef CONFIG_64BIT
+        .level  2.0w
+#endif
+
+/* Hardware General Registers.  */
+r0:	.reg	%r0
+r1:	.reg	%r1
+r2:	.reg	%r2
+r3:	.reg	%r3
+r4:	.reg	%r4
+r5:	.reg	%r5
+r6:	.reg	%r6
+r7:	.reg	%r7
+r8:	.reg	%r8
+r9:	.reg	%r9
+r10:	.reg	%r10
+r11:	.reg	%r11
+r12:	.reg	%r12
+r13:	.reg	%r13
+r14:	.reg	%r14
+r15:	.reg	%r15
+r16:	.reg	%r16
+r17:	.reg	%r17
+r18:	.reg	%r18
+r19:	.reg	%r19
+r20:	.reg	%r20
+r21:	.reg	%r21
+r22:	.reg	%r22
+r23:	.reg	%r23
+r24:	.reg	%r24
+r25:	.reg	%r25
+r26:	.reg	%r26
+r27:	.reg	%r27
+r28:	.reg	%r28
+r29:	.reg	%r29
+r30:	.reg	%r30
+r31:	.reg	%r31
+
+/* Hardware Space Registers.  */
+sr0:	.reg	%sr0
+sr1:	.reg	%sr1
+sr2:	.reg	%sr2
+sr3:	.reg	%sr3
+sr4:	.reg	%sr4
+sr5:	.reg	%sr5
+sr6:	.reg	%sr6
+sr7:	.reg	%sr7
+
+/* Hardware Floating Point Registers.  */
+fr0:	.reg	%fr0
+fr1:	.reg	%fr1
+fr2:	.reg	%fr2
+fr3:	.reg	%fr3
+fr4:	.reg	%fr4
+fr5:	.reg	%fr5
+fr6:	.reg	%fr6
+fr7:	.reg	%fr7
+fr8:	.reg	%fr8
+fr9:	.reg	%fr9
+fr10:	.reg	%fr10
+fr11:	.reg	%fr11
+fr12:	.reg	%fr12
+fr13:	.reg	%fr13
+fr14:	.reg	%fr14
+fr15:	.reg	%fr15
+
+/* Hardware Control Registers.  */
+cr11:	.reg	%cr11
+sar:	.reg	%cr11	/* Shift Amount Register */
+
+/* Software Architecture General Registers.  */
+rp:	.reg    r2	/* return pointer */
+#ifdef CONFIG_64BIT
+mrp:	.reg	r2 	/* millicode return pointer */
+#else
+mrp:	.reg	r31	/* millicode return pointer */
+#endif
+ret0:	.reg    r28	/* return value */
+ret1:	.reg    r29	/* return value (high part of double) */
+sp:	.reg 	r30	/* stack pointer */
+dp:	.reg	r27	/* data pointer */
+arg0:	.reg	r26	/* argument */
+arg1:	.reg	r25	/* argument or high part of double argument */
+arg2:	.reg	r24	/* argument */
+arg3:	.reg	r23	/* argument or high part of double argument */
+
+/* Software Architecture Space Registers.  */
+/* 		sr0	; return link from BLE */
+sret:	.reg	sr1	/* return value */
+sarg:	.reg	sr1	/* argument */
+/* 		sr4	; PC SPACE tracker */
+/* 		sr5	; process private data */
+
+/* Frame Offsets (millicode convention!)  Used when calling other
+   millicode routines.  Stack unwinding is dependent upon these
+   definitions.  */
+r31_slot:	.equ	-20	/* "current RP" slot */
+sr0_slot:	.equ	-16     /* "static link" slot */
+#if defined(CONFIG_64BIT)
+mrp_slot:       .equ    -16	/* "current RP" slot */
+psp_slot:       .equ    -8	/* "previous SP" slot */
+#else
+mrp_slot:	.equ	-20     /* "current RP" slot (replacing "r31_slot") */
+#endif
+
+
+#define DEFINE(name,value)name:	.EQU	value
+#define RDEFINE(name,value)name:	.REG	value
+#ifdef milliext
+#define MILLI_BE(lbl)   BE    lbl(sr7,r0)
+#define MILLI_BEN(lbl)  BE,n  lbl(sr7,r0)
+#define MILLI_BLE(lbl)	BLE   lbl(sr7,r0)
+#define MILLI_BLEN(lbl)	BLE,n lbl(sr7,r0)
+#define MILLIRETN	BE,n  0(sr0,mrp)
+#define MILLIRET	BE    0(sr0,mrp)
+#define MILLI_RETN	BE,n  0(sr0,mrp)
+#define MILLI_RET	BE    0(sr0,mrp)
+#else
+#define MILLI_BE(lbl)	B     lbl
+#define MILLI_BEN(lbl)  B,n   lbl
+#define MILLI_BLE(lbl)	BL    lbl,mrp
+#define MILLI_BLEN(lbl)	BL,n  lbl,mrp
+#define MILLIRETN	BV,n  0(mrp)
+#define MILLIRET	BV    0(mrp)
+#define MILLI_RETN	BV,n  0(mrp)
+#define MILLI_RET	BV    0(mrp)
+#endif
+
+#define CAT(a,b)	a##b
+
+#define SUBSPA_MILLI	 .section .text
+#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
+#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
+#define ATTR_MILLI
+#define SUBSPA_DATA	 .section .data
+#define ATTR_DATA
+#define GLOBAL		 $global$
+#define GSYM(sym) 	 !sym:
+#define LSYM(sym)	 !CAT(.L,sym:)
+#define LREF(sym)	 CAT(.L,sym)
+
+#ifdef L_dyncall
+	SUBSPA_MILLI
+	ATTR_DATA
+GSYM($$dyncall)
+	.export $$dyncall,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+	bb,>=,n %r22,30,LREF(1)		; branch if not plabel address
+	depi	0,31,2,%r22		; clear the two least significant bits
+	ldw	4(%r22),%r19		; load new LTP value
+	ldw	0(%r22),%r22		; load address of target
+LSYM(1)
+	bv	%r0(%r22)		; branch to the real target
+	stw	%r2,-24(%r30)		; save return address into frame marker
+	.exit
+	.procend
+#endif
+
+#ifdef L_divI
+/* ROUTINES:	$$divI, $$divoI
+
+   Single precision divide for signed binary integers.
+
+   The quotient is truncated towards zero.
+   The sign of the quotient is the XOR of the signs of the dividend and
+   divisor.
+   Divide by zero is trapped.
+   Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	arg1 ==	divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	quotient
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:
+   .		divisor is zero  (traps with ADDIT,=  0,25,0)
+   .		dividend==-2**31  and divisor==-1 and routine is $$divoI
+   .				 (traps with ADDO  26,25,0)
+   .	Changes memory at the following places:
+   .		NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Branchs to other millicode routines using BE
+   .		$$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15
+   .
+   .	For selected divisors, calls a divide by constant routine written by
+   .	Karl Pettis.  Eligible divisors are 1..15 excluding 11 and 13.
+   .
+   .	The only overflow case is -2**31 divided by -1.
+   .	Both routines return -2**31 but only $$divoI traps.  */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1)	/*  r29 */
+RDEFINE(temp1,arg0)
+	SUBSPA_MILLI_DIV
+	ATTR_MILLI
+	.import $$divI_2,millicode
+	.import $$divI_3,millicode
+	.import $$divI_4,millicode
+	.import $$divI_5,millicode
+	.import $$divI_6,millicode
+	.import $$divI_7,millicode
+	.import $$divI_8,millicode
+	.import $$divI_9,millicode
+	.import $$divI_10,millicode
+	.import $$divI_12,millicode
+	.import $$divI_14,millicode
+	.import $$divI_15,millicode
+	.export $$divI,millicode
+	.export	$$divoI,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+GSYM($$divoI)
+	comib,=,n  -1,arg1,LREF(negative1)	/*  when divisor == -1 */
+GSYM($$divI)
+	ldo	-1(arg1),temp		/*  is there at most one bit set ? */
+	and,<>	arg1,temp,r0		/*  if not, don't use power of 2 divide */
+	addi,>	0,arg1,r0		/*  if divisor > 0, use power of 2 divide */
+	b,n	LREF(neg_denom)
+LSYM(pow2)
+	addi,>=	0,arg0,retreg		/*  if numerator is negative, add the */
+	add	arg0,temp,retreg	/*  (denominaotr -1) to correct for shifts */
+	extru,=	arg1,15,16,temp		/*  test denominator with 0xffff0000 */
+	extrs	retreg,15,16,retreg	/*  retreg = retreg >> 16 */
+	or	arg1,temp,arg1		/*  arg1 = arg1 | (arg1 >> 16) */
+	ldi	0xcc,temp1		/*  setup 0xcc in temp1 */
+	extru,= arg1,23,8,temp		/*  test denominator with 0xff00 */
+	extrs	retreg,23,24,retreg	/*  retreg = retreg >> 8 */
+	or	arg1,temp,arg1		/*  arg1 = arg1 | (arg1 >> 8) */
+	ldi	0xaa,temp		/*  setup 0xaa in temp */
+	extru,= arg1,27,4,r0		/*  test denominator with 0xf0 */
+	extrs	retreg,27,28,retreg	/*  retreg = retreg >> 4 */
+	and,=	arg1,temp1,r0		/*  test denominator with 0xcc */
+	extrs	retreg,29,30,retreg	/*  retreg = retreg >> 2 */
+	and,=	arg1,temp,r0		/*  test denominator with 0xaa */
+	extrs	retreg,30,31,retreg	/*  retreg = retreg >> 1 */
+	MILLIRETN
+LSYM(neg_denom)
+	addi,<	0,arg1,r0		/*  if arg1 >= 0, it's not power of 2 */
+	b,n	LREF(regular_seq)
+	sub	r0,arg1,temp		/*  make denominator positive */
+	comb,=,n  arg1,temp,LREF(regular_seq)	/*  test against 0x80000000 and 0 */
+	ldo	-1(temp),retreg		/*  is there at most one bit set ? */
+	and,=	temp,retreg,r0		/*  if so, the denominator is power of 2 */
+	b,n	LREF(regular_seq)
+	sub	r0,arg0,retreg		/*  negate numerator */
+	comb,=,n arg0,retreg,LREF(regular_seq) /*  test against 0x80000000 */
+	copy	retreg,arg0		/*  set up arg0, arg1 and temp	*/
+	copy	temp,arg1		/*  before branching to pow2 */
+	b	LREF(pow2)
+	ldo	-1(arg1),temp
+LSYM(regular_seq)
+	comib,>>=,n 15,arg1,LREF(small_divisor)
+	add,>=	0,arg0,retreg		/*  move dividend, if retreg < 0, */
+LSYM(normal)
+	subi	0,retreg,retreg		/*    make it positive */
+	sub	0,arg1,temp		/*  clear carry,  */
+					/*    negate the divisor */
+	ds	0,temp,0		/*  set V-bit to the comple- */
+					/*    ment of the divisor sign */
+	add	retreg,retreg,retreg	/*  shift msb bit into carry */
+	ds	r0,arg1,temp		/*  1st divide step, if no carry */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  2nd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  3rd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  4th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  5th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  6th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  7th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  8th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  9th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  10th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  11th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  12th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  13th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  14th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  15th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  16th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  17th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  18th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  19th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  20th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  21st divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  22nd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  23rd divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  24th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  25th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  26th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  27th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  28th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  29th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  30th divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  31st divide step */
+	addc	retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds	temp,arg1,temp		/*  32nd divide step, */
+	addc	retreg,retreg,retreg	/*  shift last retreg bit into retreg */
+	xor,>=	arg0,arg1,0		/*  get correct sign of quotient */
+	  sub	0,retreg,retreg		/*    based on operand signs */
+	MILLIRETN
+	nop
+
+LSYM(small_divisor)
+
+#if defined(CONFIG_64BIT)
+/*  Clear the upper 32 bits of the arg1 register.  We are working with	*/
+/*  small divisors (and 32-bit integers)   We must not be mislead  */
+/*  by "1" bits left in the upper 32 bits.  */
+	depd %r0,31,32,%r25
+#endif
+	blr,n	arg1,r0
+	nop
+/*  table for divisor == 0,1, ... ,15 */
+	addit,=	0,arg1,r0	/*  trap if divisor == 0 */
+	nop
+	MILLIRET		/*  divisor == 1 */
+	copy	arg0,retreg
+	MILLI_BEN($$divI_2)	/*  divisor == 2 */
+	nop
+	MILLI_BEN($$divI_3)	/*  divisor == 3 */
+	nop
+	MILLI_BEN($$divI_4)	/*  divisor == 4 */
+	nop
+	MILLI_BEN($$divI_5)	/*  divisor == 5 */
+	nop
+	MILLI_BEN($$divI_6)	/*  divisor == 6 */
+	nop
+	MILLI_BEN($$divI_7)	/*  divisor == 7 */
+	nop
+	MILLI_BEN($$divI_8)	/*  divisor == 8 */
+	nop
+	MILLI_BEN($$divI_9)	/*  divisor == 9 */
+	nop
+	MILLI_BEN($$divI_10)	/*  divisor == 10 */
+	nop
+	b	LREF(normal)		/*  divisor == 11 */
+	add,>=	0,arg0,retreg
+	MILLI_BEN($$divI_12)	/*  divisor == 12 */
+	nop
+	b	LREF(normal)		/*  divisor == 13 */
+	add,>=	0,arg0,retreg
+	MILLI_BEN($$divI_14)	/*  divisor == 14 */
+	nop
+	MILLI_BEN($$divI_15)	/*  divisor == 15 */
+	nop
+
+LSYM(negative1)
+	sub	0,arg0,retreg	/*  result is negation of dividend */
+	MILLIRET
+	addo	arg0,arg1,r0	/*  trap iff dividend==0x80000000 && divisor==-1 */
+	.exit
+	.procend
+	.end
+#endif
+
+#ifdef L_divU
+/* ROUTINE:	$$divU
+   .
+   .	Single precision divide for unsigned integers.
+   .
+   .	Quotient is truncated towards zero.
+   .	Traps on divide by zero.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	arg1 ==	divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	quotient
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:
+   .		divisor is zero
+   .	Changes memory at the following places:
+   .		NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Does not create a stack frame.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Branchs to other millicode routines using BE:
+   .		$$divU_# for 3,5,6,7,9,10,12,14,15
+   .
+   .	For selected small divisors calls the special divide by constant
+   .	routines written by Karl Pettis.  These are: 3,5,6,7,9,10,12,14,15.  */
+
+RDEFINE(temp,r1)
+RDEFINE(retreg,ret1)	/* r29 */
+RDEFINE(temp1,arg0)
+	SUBSPA_MILLI_DIV
+	ATTR_MILLI
+	.export $$divU,millicode
+	.import $$divU_3,millicode
+	.import $$divU_5,millicode
+	.import $$divU_6,millicode
+	.import $$divU_7,millicode
+	.import $$divU_9,millicode
+	.import $$divU_10,millicode
+	.import $$divU_12,millicode
+	.import $$divU_14,millicode
+	.import $$divU_15,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+GSYM($$divU)
+/* The subtract is not nullified since it does no harm and can be used
+   by the two cases that branch back to "normal".  */
+	ldo	-1(arg1),temp		/* is there at most one bit set ? */
+	and,=	arg1,temp,r0		/* if so, denominator is power of 2 */
+	b	LREF(regular_seq)
+	addit,=	0,arg1,0		/* trap for zero dvr */
+	copy	arg0,retreg
+	extru,= arg1,15,16,temp		/* test denominator with 0xffff0000 */
+	extru	retreg,15,16,retreg	/* retreg = retreg >> 16 */
+	or	arg1,temp,arg1		/* arg1 = arg1 | (arg1 >> 16) */
+	ldi	0xcc,temp1		/* setup 0xcc in temp1 */
+	extru,= arg1,23,8,temp		/* test denominator with 0xff00 */
+	extru	retreg,23,24,retreg	/* retreg = retreg >> 8 */
+	or	arg1,temp,arg1		/* arg1 = arg1 | (arg1 >> 8) */
+	ldi	0xaa,temp		/* setup 0xaa in temp */
+	extru,= arg1,27,4,r0		/* test denominator with 0xf0 */
+	extru	retreg,27,28,retreg	/* retreg = retreg >> 4 */
+	and,=	arg1,temp1,r0		/* test denominator with 0xcc */
+	extru	retreg,29,30,retreg	/* retreg = retreg >> 2 */
+	and,=	arg1,temp,r0		/* test denominator with 0xaa */
+	extru	retreg,30,31,retreg	/* retreg = retreg >> 1 */
+	MILLIRETN
+	nop	
+LSYM(regular_seq)
+	comib,>=  15,arg1,LREF(special_divisor)
+	subi	0,arg1,temp		/* clear carry, negate the divisor */
+	ds	r0,temp,r0		/* set V-bit to 1 */
+LSYM(normal)
+	add	arg0,arg0,retreg	/* shift msb bit into carry */
+	ds	r0,arg1,temp		/* 1st divide step, if no carry */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 2nd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 3rd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 4th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 5th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 6th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 7th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 8th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 9th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 10th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 11th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 12th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 13th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 14th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 15th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 16th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 17th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 18th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 19th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 20th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 21st divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 22nd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 23rd divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 24th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 25th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 26th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 27th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 28th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 29th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 30th divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 31st divide step */
+	addc	retreg,retreg,retreg	/* shift retreg with/into carry */
+	ds	temp,arg1,temp		/* 32nd divide step, */
+	MILLIRET
+	addc	retreg,retreg,retreg	/* shift last retreg bit into retreg */
+
+/* Handle the cases where divisor is a small constant or has high bit on.  */
+LSYM(special_divisor)
+/*	blr	arg1,r0 */
+/*	comib,>,n  0,arg1,LREF(big_divisor) ; nullify previous instruction */
+
+/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from
+   generating such a blr, comib sequence. A problem in nullification. So I
+   rewrote this code.  */
+
+#if defined(CONFIG_64BIT)
+/* Clear the upper 32 bits of the arg1 register.  We are working with
+   small divisors (and 32-bit unsigned integers)   We must not be mislead
+   by "1" bits left in the upper 32 bits.  */
+	depd %r0,31,32,%r25
+#endif
+	comib,>	0,arg1,LREF(big_divisor)
+	nop
+	blr	arg1,r0
+	nop
+
+LSYM(zero_divisor)	/* this label is here to provide external visibility */
+	addit,=	0,arg1,0		/* trap for zero dvr */
+	nop
+	MILLIRET			/* divisor == 1 */
+	copy	arg0,retreg
+	MILLIRET			/* divisor == 2 */
+	extru	arg0,30,31,retreg
+	MILLI_BEN($$divU_3)		/* divisor == 3 */
+	nop
+	MILLIRET			/* divisor == 4 */
+	extru	arg0,29,30,retreg
+	MILLI_BEN($$divU_5)		/* divisor == 5 */
+	nop
+	MILLI_BEN($$divU_6)		/* divisor == 6 */
+	nop
+	MILLI_BEN($$divU_7)		/* divisor == 7 */
+	nop
+	MILLIRET			/* divisor == 8 */
+	extru	arg0,28,29,retreg
+	MILLI_BEN($$divU_9)		/* divisor == 9 */
+	nop
+	MILLI_BEN($$divU_10)		/* divisor == 10 */
+	nop
+	b	LREF(normal)		/* divisor == 11 */
+	ds	r0,temp,r0		/* set V-bit to 1 */
+	MILLI_BEN($$divU_12)		/* divisor == 12 */
+	nop
+	b	LREF(normal)		/* divisor == 13 */
+	ds	r0,temp,r0		/* set V-bit to 1 */
+	MILLI_BEN($$divU_14)		/* divisor == 14 */
+	nop
+	MILLI_BEN($$divU_15)		/* divisor == 15 */
+	nop
+
+/* Handle the case where the high bit is on in the divisor.
+   Compute:	if( dividend>=divisor) quotient=1; else quotient=0;
+   Note:	dividend>==divisor iff dividend-divisor does not borrow
+   and		not borrow iff carry.  */
+LSYM(big_divisor)
+	sub	arg0,arg1,r0
+	MILLIRET
+	addc	r0,r0,retreg
+	.exit
+	.procend
+	.end
+#endif
+
+#ifdef L_remI
+/* ROUTINE:	$$remI
+
+   DESCRIPTION:
+   .	$$remI returns the remainder of the division of two signed 32-bit
+   .	integers.  The sign of the remainder is the same as the sign of
+   .	the dividend.
+
+
+   INPUT REGISTERS:
+   .	arg0 == dividend
+   .	arg1 == divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 = destroyed
+   .	arg1 = destroyed
+   .	ret1 = remainder
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   = undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:  DIVIDE BY ZERO
+   .	Changes memory at the following places:  NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable
+   .	Does not create a stack frame
+   .	Is usable for internal or external microcode
+
+   DISCUSSION:
+   .	Calls other millicode routines via mrp:  NONE
+   .	Calls other millicode routines:  NONE  */
+
+RDEFINE(tmp,r1)
+RDEFINE(retreg,ret1)
+
+	SUBSPA_MILLI
+	ATTR_MILLI
+	.proc
+	.callinfo millicode
+	.entry
+GSYM($$remI)
+GSYM($$remoI)
+	.export $$remI,MILLICODE
+	.export $$remoI,MILLICODE
+	ldo		-1(arg1),tmp		/*  is there at most one bit set ? */
+	and,<>		arg1,tmp,r0		/*  if not, don't use power of 2 */
+	addi,>		0,arg1,r0		/*  if denominator > 0, use power */
+						/*  of 2 */
+	b,n		LREF(neg_denom)
+LSYM(pow2)
+	comb,>,n	0,arg0,LREF(neg_num)	/*  is numerator < 0 ? */
+	and		arg0,tmp,retreg		/*  get the result */
+	MILLIRETN
+LSYM(neg_num)
+	subi		0,arg0,arg0		/*  negate numerator */
+	and		arg0,tmp,retreg		/*  get the result */
+	subi		0,retreg,retreg		/*  negate result */
+	MILLIRETN
+LSYM(neg_denom)
+	addi,<		0,arg1,r0		/*  if arg1 >= 0, it's not power */
+						/*  of 2 */
+	b,n		LREF(regular_seq)
+	sub		r0,arg1,tmp		/*  make denominator positive */
+	comb,=,n	arg1,tmp,LREF(regular_seq) /*  test against 0x80000000 and 0 */
+	ldo		-1(tmp),retreg		/*  is there at most one bit set ? */
+	and,=		tmp,retreg,r0		/*  if not, go to regular_seq */
+	b,n		LREF(regular_seq)
+	comb,>,n	0,arg0,LREF(neg_num_2)	/*  if arg0 < 0, negate it  */
+	and		arg0,retreg,retreg
+	MILLIRETN
+LSYM(neg_num_2)
+	subi		0,arg0,tmp		/*  test against 0x80000000 */
+	and		tmp,retreg,retreg
+	subi		0,retreg,retreg
+	MILLIRETN
+LSYM(regular_seq)
+	addit,=		0,arg1,0		/*  trap if div by zero */
+	add,>=		0,arg0,retreg		/*  move dividend, if retreg < 0, */
+	sub		0,retreg,retreg		/*    make it positive */
+	sub		0,arg1, tmp		/*  clear carry,  */
+						/*    negate the divisor */
+	ds		0, tmp,0		/*  set V-bit to the comple- */
+						/*    ment of the divisor sign */
+	or		0,0, tmp		/*  clear  tmp */
+	add		retreg,retreg,retreg	/*  shift msb bit into carry */
+	ds		 tmp,arg1, tmp		/*  1st divide step, if no carry */
+						/*    out, msb of quotient = 0 */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+LSYM(t1)
+	ds		 tmp,arg1, tmp		/*  2nd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  3rd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  4th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  5th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  6th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  7th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  8th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  9th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  10th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  11th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  12th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  13th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  14th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  15th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  16th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  17th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  18th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  19th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  20th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  21st divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  22nd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  23rd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  24th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  25th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  26th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  27th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  28th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  29th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  30th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  31st divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  32nd divide step, */
+	addc		retreg,retreg,retreg	/*  shift last bit into retreg */
+	movb,>=,n	 tmp,retreg,LREF(finish) /*  branch if pos.  tmp */
+	add,<		arg1,0,0		/*  if arg1 > 0, add arg1 */
+	add,tr		 tmp,arg1,retreg	/*    for correcting remainder tmp */
+	sub		 tmp,arg1,retreg	/*  else add absolute value arg1 */
+LSYM(finish)
+	add,>=		arg0,0,0		/*  set sign of remainder */
+	sub		0,retreg,retreg		/*    to sign of dividend */
+	MILLIRET
+	nop
+	.exit
+	.procend
+#ifdef milliext
+	.origin 0x00000200
+#endif
+	.end
+#endif
+
+#ifdef L_remU
+/* ROUTINE:	$$remU
+   .	Single precision divide for remainder with unsigned binary integers.
+   .
+   .	The remainder must be dividend-(dividend/divisor)*divisor.
+   .	Divide by zero is trapped.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	arg1 == divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	remainder
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:  DIVIDE BY ZERO
+   .	Changes memory at the following places:  NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Does not create a stack frame.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Calls other millicode routines using mrp: NONE
+   .	Calls other millicode routines: NONE  */
+
+
+RDEFINE(temp,r1)
+RDEFINE(rmndr,ret1)	/*  r29 */
+	SUBSPA_MILLI
+	ATTR_MILLI
+	.export $$remU,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+GSYM($$remU)
+	ldo	-1(arg1),temp		/*  is there at most one bit set ? */
+	and,=	arg1,temp,r0		/*  if not, don't use power of 2 */
+	b	LREF(regular_seq)
+	addit,=	0,arg1,r0		/*  trap on div by zero */
+	and	arg0,temp,rmndr		/*  get the result for power of 2 */
+	MILLIRETN
+LSYM(regular_seq)
+	comib,>=,n  0,arg1,LREF(special_case)
+	subi	0,arg1,rmndr		/*  clear carry, negate the divisor */
+	ds	r0,rmndr,r0		/*  set V-bit to 1 */
+	add	arg0,arg0,temp		/*  shift msb bit into carry */
+	ds	r0,arg1,rmndr		/*  1st divide step, if no carry */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  2nd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  3rd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  4th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  5th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  6th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  7th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  8th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  9th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  10th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  11th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  12th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  13th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  14th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  15th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  16th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  17th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  18th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  19th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  20th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  21st divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  22nd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  23rd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  24th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  25th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  26th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  27th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  28th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  29th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  30th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  31st divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  32nd divide step, */
+	comiclr,<= 0,rmndr,r0
+	  add	rmndr,arg1,rmndr	/*  correction */
+	MILLIRETN
+	nop
+
+/* Putting >= on the last DS and deleting COMICLR does not work!  */
+LSYM(special_case)
+	sub,>>=	arg0,arg1,rmndr
+	  copy	arg0,rmndr
+	MILLIRETN
+	nop
+	.exit
+	.procend
+	.end
+#endif
+
+#ifdef L_div_const
+/* ROUTINE:	$$divI_2
+   .		$$divI_3	$$divU_3
+   .		$$divI_4
+   .		$$divI_5	$$divU_5
+   .		$$divI_6	$$divU_6
+   .		$$divI_7	$$divU_7
+   .		$$divI_8
+   .		$$divI_9	$$divU_9
+   .		$$divI_10	$$divU_10
+   .
+   .		$$divI_12	$$divU_12
+   .
+   .		$$divI_14	$$divU_14
+   .		$$divI_15	$$divU_15
+   .		$$divI_16
+   .		$$divI_17	$$divU_17
+   .
+   .	Divide by selected constants for single precision binary integers.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	quotient
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions: NONE
+   .	Changes memory at the following places:  NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Does not create a stack frame.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Calls other millicode routines using mrp:  NONE
+   .	Calls other millicode routines:  NONE  */
+
+
+/* TRUNCATED DIVISION BY SMALL INTEGERS
+
+   We are interested in q(x) = floor(x/y), where x >= 0 and y > 0
+   (with y fixed).
+
+   Let a = floor(z/y), for some choice of z.  Note that z will be
+   chosen so that division by z is cheap.
+
+   Let r be the remainder(z/y).  In other words, r = z - ay.
+
+   Now, our method is to choose a value for b such that
+
+   q'(x) = floor((ax+b)/z)
+
+   is equal to q(x) over as large a range of x as possible.  If the
+   two are equal over a sufficiently large range, and if it is easy to
+   form the product (ax), and it is easy to divide by z, then we can
+   perform the division much faster than the general division algorithm.
+
+   So, we want the following to be true:
+
+   .	For x in the following range:
+   .
+   .	    ky <= x < (k+1)y
+   .
+   .	implies that
+   .
+   .	    k <= (ax+b)/z < (k+1)
+
+   We want to determine b such that this is true for all k in the
+   range {0..K} for some maximum K.
+
+   Since (ax+b) is an increasing function of x, we can take each
+   bound separately to determine the "best" value for b.
+
+   (ax+b)/z < (k+1)	       implies
+
+   (a((k+1)y-1)+b < (k+1)z     implies
+
+   b < a + (k+1)(z-ay)	       implies
+
+   b < a + (k+1)r
+
+   This needs to be true for all k in the range {0..K}.  In
+   particular, it is true for k = 0 and this leads to a maximum
+   acceptable value for b.
+
+   b < a+r   or   b <= a+r-1
+
+   Taking the other bound, we have
+
+   k <= (ax+b)/z	       implies
+
+   k <= (aky+b)/z	       implies
+
+   k(z-ay) <= b		       implies
+
+   kr <= b
+
+   Clearly, the largest range for k will be achieved by maximizing b,
+   when r is not zero.	When r is zero, then the simplest choice for b
+   is 0.  When r is not 0, set
+
+   .	b = a+r-1
+
+   Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y)
+   for all x in the range:
+
+   .	0 <= x < (K+1)y
+
+   We need to determine what K is.  Of our two bounds,
+
+   .	b < a+(k+1)r	is satisfied for all k >= 0, by construction.
+
+   The other bound is
+
+   .	kr <= b
+
+   This is always true if r = 0.  If r is not 0 (the usual case), then
+   K = floor((a+r-1)/r), is the maximum value for k.
+
+   Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct
+   answer for q(x) = floor(x/y) when x is in the range
+
+   (0,(K+1)y-1)	       K = floor((a+r-1)/r)
+
+   To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that
+   the formula for q'(x) yields the correct value of q(x) for all x
+   representable by a single word in HPPA.
+
+   We are also constrained in that computing the product (ax), adding
+   b, and dividing by z must all be done quickly, otherwise we will be
+   better off going through the general algorithm using the DS
+   instruction, which uses approximately 70 cycles.
+
+   For each y, there is a choice of z which satisfies the constraints
+   for (K+1)y >= 2**32.  We may not, however, be able to satisfy the
+   timing constraints for arbitrary y.	It seems that z being equal to
+   a power of 2 or a power of 2 minus 1 is as good as we can do, since
+   it minimizes the time to do division by z.  We want the choice of z
+   to also result in a value for (a) that minimizes the computation of
+   the product (ax).  This is best achieved if (a) has a regular bit
+   pattern (so the multiplication can be done with shifts and adds).
+   The value of (a) also needs to be less than 2**32 so the product is
+   always guaranteed to fit in 2 words.
+
+   In actual practice, the following should be done:
+
+   1) For negative x, you should take the absolute value and remember
+   .  the fact so that the result can be negated.  This obviously does
+   .  not apply in the unsigned case.
+   2) For even y, you should factor out the power of 2 that divides y
+   .  and divide x by it.  You can then proceed by dividing by the
+   .  odd factor of y.
+
+   Here is a table of some odd values of y, and corresponding choices
+   for z which are "good".
+
+    y	  z	  r	 a (hex)     max x (hex)
+
+    3	2**32	  1	55555555      100000001
+    5	2**32	  1	33333333      100000003
+    7  2**24-1	  0	  249249     (infinite)
+    9  2**24-1	  0	  1c71c7     (infinite)
+   11  2**20-1	  0	   1745d     (infinite)
+   13  2**24-1	  0	  13b13b     (infinite)
+   15	2**32	  1	11111111      10000000d
+   17	2**32	  1	 f0f0f0f      10000000f
+
+   If r is 1, then b = a+r-1 = a.  This simplifies the computation
+   of (ax+b), since you can compute (x+1)(a) instead.  If r is 0,
+   then b = 0 is ok to use which simplifies (ax+b).
+
+   The bit patterns for 55555555, 33333333, and 11111111 are obviously
+   very regular.  The bit patterns for the other values of a above are:
+
+    y	   (hex)	  (binary)
+
+    7	  249249  001001001001001001001001  << regular >>
+    9	  1c71c7  000111000111000111000111  << regular >>
+   11	   1745d  000000010111010001011101  << irregular >>
+   13	  13b13b  000100111011000100111011  << irregular >>
+
+   The bit patterns for (a) corresponding to (y) of 11 and 13 may be
+   too irregular to warrant using this method.
+
+   When z is a power of 2 minus 1, then the division by z is slightly
+   more complicated, involving an iterative solution.
+
+   The code presented here solves division by 1 through 17, except for
+   11 and 13. There are algorithms for both signed and unsigned
+   quantities given.
+
+   TIMINGS (cycles)
+
+   divisor  positive  negative	unsigned
+
+   .   1	2	   2	     2
+   .   2	4	   4	     2
+   .   3       19	  21	    19
+   .   4	4	   4	     2
+   .   5       18	  22	    19
+   .   6       19	  22	    19
+   .   8	4	   4	     2
+   .  10       18	  19	    17
+   .  12       18	  20	    18
+   .  15       16	  18	    16
+   .  16	4	   4	     2
+   .  17       16	  18	    16
+
+   Now, the algorithm for 7, 9, and 14 is an iterative one.  That is,
+   a loop body is executed until the tentative quotient is 0.  The
+   number of times the loop body is executed varies depending on the
+   dividend, but is never more than two times.	If the dividend is
+   less than the divisor, then the loop body is not executed at all.
+   Each iteration adds 4 cycles to the timings.
+
+   divisor  positive  negative	unsigned
+
+   .   7       19+4n	 20+4n	   20+4n    n = number of iterations
+   .   9       21+4n	 22+4n	   21+4n
+   .  14       21+4n	 22+4n	   20+4n
+
+   To give an idea of how the number of iterations varies, here is a
+   table of dividend versus number of iterations when dividing by 7.
+
+   smallest	 largest       required
+   dividend	dividend      iterations
+
+   .	0	     6		    0
+   .	7	 0x6ffffff	    1
+   0x1000006	0xffffffff	    2
+
+   There is some overlap in the range of numbers requiring 1 and 2
+   iterations.	*/
+
+RDEFINE(t2,r1)
+RDEFINE(x2,arg0)	/*  r26 */
+RDEFINE(t1,arg1)	/*  r25 */
+RDEFINE(x1,ret1)	/*  r29 */
+
+	SUBSPA_MILLI_DIV
+	ATTR_MILLI
+
+	.proc
+	.callinfo	millicode
+	.entry
+/* NONE of these routines require a stack frame
+   ALL of these routines are unwindable from millicode	*/
+
+GSYM($$divide_by_constant)
+	.export $$divide_by_constant,millicode
+/*  Provides a "nice" label for the code covered by the unwind descriptor
+    for things like gprof.  */
+
+/* DIVISION BY 2 (shift by 1) */
+GSYM($$divI_2)
+	.export		$$divI_2,millicode
+	comclr,>=	arg0,0,0
+	addi		1,arg0,arg0
+	MILLIRET
+	extrs		arg0,30,31,ret1
+
+
+/* DIVISION BY 4 (shift by 2) */
+GSYM($$divI_4)
+	.export		$$divI_4,millicode
+	comclr,>=	arg0,0,0
+	addi		3,arg0,arg0
+	MILLIRET
+	extrs		arg0,29,30,ret1
+
+
+/* DIVISION BY 8 (shift by 3) */
+GSYM($$divI_8)
+	.export		$$divI_8,millicode
+	comclr,>=	arg0,0,0
+	addi		7,arg0,arg0
+	MILLIRET
+	extrs		arg0,28,29,ret1
+
+/* DIVISION BY 16 (shift by 4) */
+GSYM($$divI_16)
+	.export		$$divI_16,millicode
+	comclr,>=	arg0,0,0
+	addi		15,arg0,arg0
+	MILLIRET
+	extrs		arg0,27,28,ret1
+
+/****************************************************************************
+*
+*	DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these
+*
+*	includes 3,5,15,17 and also 6,10,12
+*
+****************************************************************************/
+
+/* DIVISION BY 3 (use z = 2**32; a = 55555555) */
+
+GSYM($$divI_3)
+	.export		$$divI_3,millicode
+	comb,<,N	x2,0,LREF(neg3)
+
+	addi		1,x2,x2		/* this cannot overflow	*/
+	extru		x2,1,2,x1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(pos)
+	addc		x1,0,x1
+
+LSYM(neg3)
+	subi		1,x2,x2		/* this cannot overflow	*/
+	extru		x2,1,2,x1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(neg)
+	addc		x1,0,x1
+
+GSYM($$divU_3)
+	.export		$$divU_3,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	addc		0,0,x1
+	shd		x1,x2,30,t1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(pos)
+	addc		x1,t1,x1
+
+/* DIVISION BY 5 (use z = 2**32; a = 33333333) */
+
+GSYM($$divI_5)
+	.export		$$divI_5,millicode
+	comb,<,N	x2,0,LREF(neg5)
+
+	addi		3,x2,t1		/* this cannot overflow	*/
+	sh1add		x2,t1,x2	/* multiply by 3 to get started */
+	b		LREF(pos)
+	addc		0,0,x1
+
+LSYM(neg5)
+	sub		0,x2,x2		/* negate x2			*/
+	addi		1,x2,x2		/* this cannot overflow	*/
+	shd		0,x2,31,x1	/* get top bit (can be 1)	*/
+	sh1add		x2,x2,x2	/* multiply by 3 to get started */
+	b		LREF(neg)
+	addc		x1,0,x1
+
+GSYM($$divU_5)
+	.export		$$divU_5,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	addc		0,0,x1
+	shd		x1,x2,31,t1	/* multiply by 3 to get started */
+	sh1add		x2,x2,x2
+	b		LREF(pos)
+	addc		t1,x1,x1
+
+/* DIVISION BY	6 (shift to divide by 2 then divide by 3) */
+GSYM($$divI_6)
+	.export		$$divI_6,millicode
+	comb,<,N	x2,0,LREF(neg6)
+	extru		x2,30,31,x2	/* divide by 2			*/
+	addi		5,x2,t1		/* compute 5*(x2+1) = 5*x2+5	*/
+	sh2add		x2,t1,x2	/* multiply by 5 to get started */
+	b		LREF(pos)
+	addc		0,0,x1
+
+LSYM(neg6)
+	subi		2,x2,x2		/* negate, divide by 2, and add 1 */
+					/* negation and adding 1 are done */
+					/* at the same time by the SUBI   */
+	extru		x2,30,31,x2
+	shd		0,x2,30,x1
+	sh2add		x2,x2,x2	/* multiply by 5 to get started */
+	b		LREF(neg)
+	addc		x1,0,x1
+
+GSYM($$divU_6)
+	.export		$$divU_6,millicode
+	extru		x2,30,31,x2	/* divide by 2 */
+	addi		1,x2,x2		/* cannot carry */
+	shd		0,x2,30,x1	/* multiply by 5 to get started */
+	sh2add		x2,x2,x2
+	b		LREF(pos)
+	addc		x1,0,x1
+
+/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */
+GSYM($$divU_10)
+	.export		$$divU_10,millicode
+	extru		x2,30,31,x2	/* divide by 2 */
+	addi		3,x2,t1		/* compute 3*(x2+1) = (3*x2)+3	*/
+	sh1add		x2,t1,x2	/* multiply by 3 to get started */
+	addc		0,0,x1
+LSYM(pos)
+	shd		x1,x2,28,t1	/* multiply by 0x11 */
+	shd		x2,0,28,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+LSYM(pos_for_17)
+	shd		x1,x2,24,t1	/* multiply by 0x101 */
+	shd		x2,0,24,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,16,t1	/* multiply by 0x10001 */
+	shd		x2,0,16,t2
+	add		x2,t2,x2
+	MILLIRET
+	addc		x1,t1,x1
+
+GSYM($$divI_10)
+	.export		$$divI_10,millicode
+	comb,<		x2,0,LREF(neg10)
+	copy		0,x1
+	extru		x2,30,31,x2	/* divide by 2 */
+	addib,TR	1,x2,LREF(pos)	/* add 1 (cannot overflow)     */
+	sh1add		x2,x2,x2	/* multiply by 3 to get started */
+
+LSYM(neg10)
+	subi		2,x2,x2		/* negate, divide by 2, and add 1 */
+					/* negation and adding 1 are done */
+					/* at the same time by the SUBI   */
+	extru		x2,30,31,x2
+	sh1add		x2,x2,x2	/* multiply by 3 to get started */
+LSYM(neg)
+	shd		x1,x2,28,t1	/* multiply by 0x11 */
+	shd		x2,0,28,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+LSYM(neg_for_17)
+	shd		x1,x2,24,t1	/* multiply by 0x101 */
+	shd		x2,0,24,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,16,t1	/* multiply by 0x10001 */
+	shd		x2,0,16,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+	MILLIRET
+	sub		0,x1,x1
+
+/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */
+GSYM($$divI_12)
+	.export		$$divI_12,millicode
+	comb,<		x2,0,LREF(neg12)
+	copy		0,x1
+	extru		x2,29,30,x2	/* divide by 4			*/
+	addib,tr	1,x2,LREF(pos)	/* compute 5*(x2+1) = 5*x2+5    */
+	sh2add		x2,x2,x2	/* multiply by 5 to get started */
+
+LSYM(neg12)
+	subi		4,x2,x2		/* negate, divide by 4, and add 1 */
+					/* negation and adding 1 are done */
+					/* at the same time by the SUBI   */
+	extru		x2,29,30,x2
+	b		LREF(neg)
+	sh2add		x2,x2,x2	/* multiply by 5 to get started */
+
+GSYM($$divU_12)
+	.export		$$divU_12,millicode
+	extru		x2,29,30,x2	/* divide by 4   */
+	addi		5,x2,t1		/* cannot carry */
+	sh2add		x2,t1,x2	/* multiply by 5 to get started */
+	b		LREF(pos)
+	addc		0,0,x1
+
+/* DIVISION BY 15 (use z = 2**32; a = 11111111) */
+GSYM($$divI_15)
+	.export		$$divI_15,millicode
+	comb,<		x2,0,LREF(neg15)
+	copy		0,x1
+	addib,tr	1,x2,LREF(pos)+4
+	shd		x1,x2,28,t1
+
+LSYM(neg15)
+	b		LREF(neg)
+	subi		1,x2,x2
+
+GSYM($$divU_15)
+	.export		$$divU_15,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	b		LREF(pos)
+	addc		0,0,x1
+
+/* DIVISION BY 17 (use z = 2**32; a =  f0f0f0f) */
+GSYM($$divI_17)
+	.export		$$divI_17,millicode
+	comb,<,n	x2,0,LREF(neg17)
+	addi		1,x2,x2		/* this cannot overflow */
+	shd		0,x2,28,t1	/* multiply by 0xf to get started */
+	shd		x2,0,28,t2
+	sub		t2,x2,x2
+	b		LREF(pos_for_17)
+	subb		t1,0,x1
+
+LSYM(neg17)
+	subi		1,x2,x2		/* this cannot overflow */
+	shd		0,x2,28,t1	/* multiply by 0xf to get started */
+	shd		x2,0,28,t2
+	sub		t2,x2,x2
+	b		LREF(neg_for_17)
+	subb		t1,0,x1
+
+GSYM($$divU_17)
+	.export		$$divU_17,millicode
+	addi		1,x2,x2		/* this CAN overflow */
+	addc		0,0,x1
+	shd		x1,x2,28,t1	/* multiply by 0xf to get started */
+LSYM(u17)
+	shd		x2,0,28,t2
+	sub		t2,x2,x2
+	b		LREF(pos_for_17)
+	subb		t1,x1,x1
+
+
+/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these
+   includes 7,9 and also 14
+
+
+   z = 2**24-1
+   r = z mod x = 0
+
+   so choose b = 0
+
+   Also, in order to divide by z = 2**24-1, we approximate by dividing
+   by (z+1) = 2**24 (which is easy), and then correcting.
+
+   (ax) = (z+1)q' + r
+   .	= zq' + (q'+r)
+
+   So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1)
+   Then the true remainder of (ax)/z is (q'+r).  Repeat the process
+   with this new remainder, adding the tentative quotients together,
+   until a tentative quotient is 0 (and then we are done).  There is
+   one last correction to be done.  It is possible that (q'+r) = z.
+   If so, then (q'+r)/(z+1) = 0 and it looks like we are done.	But,
+   in fact, we need to add 1 more to the quotient.  Now, it turns
+   out that this happens if and only if the original value x is
+   an exact multiple of y.  So, to avoid a three instruction test at
+   the end, instead use 1 instruction to add 1 to x at the beginning.  */
+
+/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */
+GSYM($$divI_7)
+	.export		$$divI_7,millicode
+	comb,<,n	x2,0,LREF(neg7)
+LSYM(7)
+	addi		1,x2,x2		/* cannot overflow */
+	shd		0,x2,29,x1
+	sh3add		x2,x2,x2
+	addc		x1,0,x1
+LSYM(pos7)
+	shd		x1,x2,26,t1
+	shd		x2,0,26,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,20,t1
+	shd		x2,0,20,t2
+	add		x2,t2,x2
+	addc		x1,t1,t1
+
+	/* computed <t1,x2>.  Now divide it by (2**24 - 1)	*/
+
+	copy		0,x1
+	shd,=		t1,x2,24,t1	/* tentative quotient  */
+LSYM(1)
+	addb,tr		t1,x1,LREF(2)	/* add to previous quotient   */
+	extru		x2,31,24,x2	/* new remainder (unadjusted) */
+
+	MILLIRETN
+
+LSYM(2)
+	addb,tr		t1,x2,LREF(1)	/* adjust remainder */
+	extru,=		x2,7,8,t1	/* new quotient     */
+
+LSYM(neg7)
+	subi		1,x2,x2		/* negate x2 and add 1 */
+LSYM(8)
+	shd		0,x2,29,x1
+	sh3add		x2,x2,x2
+	addc		x1,0,x1
+
+LSYM(neg7_shift)
+	shd		x1,x2,26,t1
+	shd		x2,0,26,t2
+	add		x2,t2,x2
+	addc		x1,t1,x1
+
+	shd		x1,x2,20,t1
+	shd		x2,0,20,t2
+	add		x2,t2,x2
+	addc		x1,t1,t1
+
+	/* computed <t1,x2>.  Now divide it by (2**24 - 1)	*/
+
+	copy		0,x1
+	shd,=		t1,x2,24,t1	/* tentative quotient  */
+LSYM(3)
+	addb,tr		t1,x1,LREF(4)	/* add to previous quotient   */
+	extru		x2,31,24,x2	/* new remainder (unadjusted) */
+
+	MILLIRET
+	sub		0,x1,x1		/* negate result    */
+
+LSYM(4)
+	addb,tr		t1,x2,LREF(3)	/* adjust remainder */
+	extru,=		x2,7,8,t1	/* new quotient     */
+
+GSYM($$divU_7)
+	.export		$$divU_7,millicode
+	addi		1,x2,x2		/* can carry */
+	addc		0,0,x1
+	shd		x1,x2,29,t1
+	sh3add		x2,x2,x2
+	b		LREF(pos7)
+	addc		t1,x1,x1
+
+/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */
+GSYM($$divI_9)
+	.export		$$divI_9,millicode
+	comb,<,n	x2,0,LREF(neg9)
+	addi		1,x2,x2		/* cannot overflow */
+	shd		0,x2,29,t1
+	shd		x2,0,29,t2
+	sub		t2,x2,x2
+	b		LREF(pos7)
+	subb		t1,0,x1
+
+LSYM(neg9)
+	subi		1,x2,x2		/* negate and add 1 */
+	shd		0,x2,29,t1
+	shd		x2,0,29,t2
+	sub		t2,x2,x2
+	b		LREF(neg7_shift)
+	subb		t1,0,x1
+
+GSYM($$divU_9)
+	.export		$$divU_9,millicode
+	addi		1,x2,x2		/* can carry */
+	addc		0,0,x1
+	shd		x1,x2,29,t1
+	shd		x2,0,29,t2
+	sub		t2,x2,x2
+	b		LREF(pos7)
+	subb		t1,x1,x1
+
+/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */
+GSYM($$divI_14)
+	.export		$$divI_14,millicode
+	comb,<,n	x2,0,LREF(neg14)
+GSYM($$divU_14)
+	.export		$$divU_14,millicode
+	b		LREF(7)		/* go to 7 case */
+	extru		x2,30,31,x2	/* divide by 2  */
+
+LSYM(neg14)
+	subi		2,x2,x2		/* negate (and add 2) */
+	b		LREF(8)
+	extru		x2,30,31,x2	/* divide by 2	      */
+	.exit
+	.procend
+	.end
+#endif
+
+#ifdef L_mulI
+/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
+/******************************************************************************
+This routine is used on PA2.0 processors when gcc -mno-fpregs is used
+
+ROUTINE:	$$mulI
+
+
+DESCRIPTION:	
+
+	$$mulI multiplies two single word integers, giving a single 
+	word result.  
+
+
+INPUT REGISTERS:
+
+	arg0 = Operand 1
+	arg1 = Operand 2
+	r31  == return pc
+	sr0  == return space when called externally 
+
+
+OUTPUT REGISTERS:
+
+	arg0 = undefined
+	arg1 = undefined
+	ret1 = result 
+
+OTHER REGISTERS AFFECTED:
+
+	r1   = undefined
+
+SIDE EFFECTS:
+
+	Causes a trap under the following conditions:  NONE
+	Changes memory at the following places:  NONE
+
+PERMISSIBLE CONTEXT:
+
+	Unwindable
+	Does not create a stack frame
+	Is usable for internal or external microcode
+
+DISCUSSION:
+
+	Calls other millicode routines via mrp:  NONE
+	Calls other millicode routines:  NONE
+
+***************************************************************************/
+
+
+#define	a0	%arg0
+#define	a1	%arg1
+#define	t0	%r1
+#define	r	%ret1
+
+#define	a0__128a0	zdep	a0,24,25,a0
+#define	a0__256a0	zdep	a0,23,24,a0
+#define	a1_ne_0_b_l0	comb,<>	a1,0,LREF(l0)
+#define	a1_ne_0_b_l1	comb,<>	a1,0,LREF(l1)
+#define	a1_ne_0_b_l2	comb,<>	a1,0,LREF(l2)
+#define	b_n_ret_t0	b,n	LREF(ret_t0)
+#define	b_e_shift	b	LREF(e_shift)
+#define	b_e_t0ma0	b	LREF(e_t0ma0)
+#define	b_e_t0		b	LREF(e_t0)
+#define	b_e_t0a0	b	LREF(e_t0a0)
+#define	b_e_t02a0	b	LREF(e_t02a0)
+#define	b_e_t04a0	b	LREF(e_t04a0)
+#define	b_e_2t0		b	LREF(e_2t0)
+#define	b_e_2t0a0	b	LREF(e_2t0a0)
+#define	b_e_2t04a0	b	LREF(e2t04a0)
+#define	b_e_3t0		b	LREF(e_3t0)
+#define	b_e_4t0		b	LREF(e_4t0)
+#define	b_e_4t0a0	b	LREF(e_4t0a0)
+#define	b_e_4t08a0	b	LREF(e4t08a0)
+#define	b_e_5t0		b	LREF(e_5t0)
+#define	b_e_8t0		b	LREF(e_8t0)
+#define	b_e_8t0a0	b	LREF(e_8t0a0)
+#define	r__r_a0		add	r,a0,r
+#define	r__r_2a0	sh1add	a0,r,r
+#define	r__r_4a0	sh2add	a0,r,r
+#define	r__r_8a0	sh3add	a0,r,r
+#define	r__r_t0		add	r,t0,r
+#define	r__r_2t0	sh1add	t0,r,r
+#define	r__r_4t0	sh2add	t0,r,r
+#define	r__r_8t0	sh3add	t0,r,r
+#define	t0__3a0		sh1add	a0,a0,t0
+#define	t0__4a0		sh2add	a0,0,t0
+#define	t0__5a0		sh2add	a0,a0,t0
+#define	t0__8a0		sh3add	a0,0,t0
+#define	t0__9a0		sh3add	a0,a0,t0
+#define	t0__16a0	zdep	a0,27,28,t0
+#define	t0__32a0	zdep	a0,26,27,t0
+#define	t0__64a0	zdep	a0,25,26,t0
+#define	t0__128a0	zdep	a0,24,25,t0
+#define	t0__t0ma0	sub	t0,a0,t0
+#define	t0__t0_a0	add	t0,a0,t0
+#define	t0__t0_2a0	sh1add	a0,t0,t0
+#define	t0__t0_4a0	sh2add	a0,t0,t0
+#define	t0__t0_8a0	sh3add	a0,t0,t0
+#define	t0__2t0_a0	sh1add	t0,a0,t0
+#define	t0__3t0		sh1add	t0,t0,t0
+#define	t0__4t0		sh2add	t0,0,t0
+#define	t0__4t0_a0	sh2add	t0,a0,t0
+#define	t0__5t0		sh2add	t0,t0,t0
+#define	t0__8t0		sh3add	t0,0,t0
+#define	t0__8t0_a0	sh3add	t0,a0,t0
+#define	t0__9t0		sh3add	t0,t0,t0
+#define	t0__16t0	zdep	t0,27,28,t0
+#define	t0__32t0	zdep	t0,26,27,t0
+#define	t0__256a0	zdep	a0,23,24,t0
+
+
+	SUBSPA_MILLI
+	ATTR_MILLI
+	.align 16
+	.proc
+	.callinfo millicode
+	.export $$mulI,millicode
+GSYM($$mulI)	
+	combt,<<=	a1,a0,LREF(l4)	/* swap args if unsigned a1>a0 */
+	copy		0,r		/* zero out the result */
+	xor		a0,a1,a0	/* swap a0 & a1 using the */
+	xor		a0,a1,a1	/*  old xor trick */
+	xor		a0,a1,a0
+LSYM(l4)
+	combt,<=	0,a0,LREF(l3)		/* if a0>=0 then proceed like unsigned */
+	zdep		a1,30,8,t0	/* t0 = (a1&0xff)<<1 ********* */
+	sub,>		0,a1,t0		/* otherwise negate both and */
+	combt,<=,n	a0,t0,LREF(l2)	/*  swap back if |a0|<|a1| */
+	sub		0,a0,a1
+	movb,tr,n	t0,a0,LREF(l2)	/* 10th inst.  */
+
+LSYM(l0)	r__r_t0				/* add in this partial product */
+LSYM(l1)	a0__256a0			/* a0 <<= 8 ****************** */
+LSYM(l2)	zdep		a1,30,8,t0	/* t0 = (a1&0xff)<<1 ********* */
+LSYM(l3)	blr		t0,0		/* case on these 8 bits ****** */
+		extru		a1,23,24,a1	/* a1 >>= 8 ****************** */
+
+/*16 insts before this.  */
+/*			  a0 <<= 8 ************************** */
+LSYM(x0)	a1_ne_0_b_l2	! a0__256a0	! MILLIRETN	! nop
+LSYM(x1)	a1_ne_0_b_l1	! r__r_a0	! MILLIRETN	! nop
+LSYM(x2)	a1_ne_0_b_l1	! r__r_2a0	! MILLIRETN	! nop
+LSYM(x3)	a1_ne_0_b_l0	! t0__3a0	! MILLIRET	! r__r_t0
+LSYM(x4)	a1_ne_0_b_l1	! r__r_4a0	! MILLIRETN	! nop
+LSYM(x5)	a1_ne_0_b_l0	! t0__5a0	! MILLIRET	! r__r_t0
+LSYM(x6)	t0__3a0		! a1_ne_0_b_l1	! r__r_2t0	! MILLIRETN
+LSYM(x7)	t0__3a0		! a1_ne_0_b_l0	! r__r_4a0	! b_n_ret_t0
+LSYM(x8)	a1_ne_0_b_l1	! r__r_8a0	! MILLIRETN	! nop
+LSYM(x9)	a1_ne_0_b_l0	! t0__9a0	! MILLIRET	! r__r_t0
+LSYM(x10)	t0__5a0		! a1_ne_0_b_l1	! r__r_2t0	! MILLIRETN
+LSYM(x11)	t0__3a0		! a1_ne_0_b_l0	! r__r_8a0	! b_n_ret_t0
+LSYM(x12)	t0__3a0		! a1_ne_0_b_l1	! r__r_4t0	! MILLIRETN
+LSYM(x13)	t0__5a0		! a1_ne_0_b_l0	! r__r_8a0	! b_n_ret_t0
+LSYM(x14)	t0__3a0		! t0__2t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x15)	t0__5a0		! a1_ne_0_b_l0	! t0__3t0	! b_n_ret_t0
+LSYM(x16)	t0__16a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x17)	t0__9a0		! a1_ne_0_b_l0	! t0__t0_8a0	! b_n_ret_t0
+LSYM(x18)	t0__9a0		! a1_ne_0_b_l1	! r__r_2t0	! MILLIRETN
+LSYM(x19)	t0__9a0		! a1_ne_0_b_l0	! t0__2t0_a0	! b_n_ret_t0
+LSYM(x20)	t0__5a0		! a1_ne_0_b_l1	! r__r_4t0	! MILLIRETN
+LSYM(x21)	t0__5a0		! a1_ne_0_b_l0	! t0__4t0_a0	! b_n_ret_t0
+LSYM(x22)	t0__5a0		! t0__2t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x23)	t0__5a0		! t0__2t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x24)	t0__3a0		! a1_ne_0_b_l1	! r__r_8t0	! MILLIRETN
+LSYM(x25)	t0__5a0		! a1_ne_0_b_l0	! t0__5t0	! b_n_ret_t0
+LSYM(x26)	t0__3a0		! t0__4t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x27)	t0__3a0		! a1_ne_0_b_l0	! t0__9t0	! b_n_ret_t0
+LSYM(x28)	t0__3a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x29)	t0__3a0		! t0__2t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x30)	t0__5a0		! t0__3t0	! b_e_shift	! r__r_2t0
+LSYM(x31)	t0__32a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+LSYM(x32)	t0__32a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x33)	t0__8a0		! a1_ne_0_b_l0	! t0__4t0_a0	! b_n_ret_t0
+LSYM(x34)	t0__16a0	! t0__t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x35)	t0__9a0		! t0__3t0	! b_e_t0	! t0__t0_8a0
+LSYM(x36)	t0__9a0		! a1_ne_0_b_l1	! r__r_4t0	! MILLIRETN
+LSYM(x37)	t0__9a0		! a1_ne_0_b_l0	! t0__4t0_a0	! b_n_ret_t0
+LSYM(x38)	t0__9a0		! t0__2t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x39)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x40)	t0__5a0		! a1_ne_0_b_l1	! r__r_8t0	! MILLIRETN
+LSYM(x41)	t0__5a0		! a1_ne_0_b_l0	! t0__8t0_a0	! b_n_ret_t0
+LSYM(x42)	t0__5a0		! t0__4t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x43)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x44)	t0__5a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x45)	t0__9a0		! a1_ne_0_b_l0	! t0__5t0	! b_n_ret_t0
+LSYM(x46)	t0__9a0		! t0__5t0	! b_e_t0	! t0__t0_a0
+LSYM(x47)	t0__9a0		! t0__5t0	! b_e_t0	! t0__t0_2a0
+LSYM(x48)	t0__3a0		! a1_ne_0_b_l0	! t0__16t0	! b_n_ret_t0
+LSYM(x49)	t0__9a0		! t0__5t0	! b_e_t0	! t0__t0_4a0
+LSYM(x50)	t0__5a0		! t0__5t0	! b_e_shift	! r__r_2t0
+LSYM(x51)	t0__9a0		! t0__t0_8a0	! b_e_t0	! t0__3t0
+LSYM(x52)	t0__3a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x53)	t0__3a0		! t0__4t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x54)	t0__9a0		! t0__3t0	! b_e_shift	! r__r_2t0
+LSYM(x55)	t0__9a0		! t0__3t0	! b_e_t0	! t0__2t0_a0
+LSYM(x56)	t0__3a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x57)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__3t0
+LSYM(x58)	t0__3a0		! t0__2t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x59)	t0__9a0		! t0__2t0_a0	! b_e_t02a0	! t0__3t0
+LSYM(x60)	t0__5a0		! t0__3t0	! b_e_shift	! r__r_4t0
+LSYM(x61)	t0__5a0		! t0__3t0	! b_e_t0	! t0__4t0_a0
+LSYM(x62)	t0__32a0	! t0__t0ma0	! b_e_shift	! r__r_2t0
+LSYM(x63)	t0__64a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+LSYM(x64)	t0__64a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x65)	t0__8a0		! a1_ne_0_b_l0	! t0__8t0_a0	! b_n_ret_t0
+LSYM(x66)	t0__32a0	! t0__t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x67)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x68)	t0__8a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x69)	t0__8a0		! t0__2t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x70)	t0__64a0	! t0__t0_4a0	! b_e_t0	! t0__t0_2a0
+LSYM(x71)	t0__9a0		! t0__8t0	! b_e_t0	! t0__t0ma0
+LSYM(x72)	t0__9a0		! a1_ne_0_b_l1	! r__r_8t0	! MILLIRETN
+LSYM(x73)	t0__9a0		! t0__8t0_a0	! b_e_shift	! r__r_t0
+LSYM(x74)	t0__9a0		! t0__4t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x75)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x76)	t0__9a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x77)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x78)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x79)	t0__16a0	! t0__5t0	! b_e_t0	! t0__t0ma0
+LSYM(x80)	t0__16a0	! t0__5t0	! b_e_shift	! r__r_t0
+LSYM(x81)	t0__9a0		! t0__9t0	! b_e_shift	! r__r_t0
+LSYM(x82)	t0__5a0		! t0__8t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x83)	t0__5a0		! t0__8t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x84)	t0__5a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x85)	t0__8a0		! t0__2t0_a0	! b_e_t0	! t0__5t0
+LSYM(x86)	t0__5a0		! t0__4t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x87)	t0__9a0		! t0__9t0	! b_e_t02a0	! t0__t0_4a0
+LSYM(x88)	t0__5a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x89)	t0__5a0		! t0__2t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x90)	t0__9a0		! t0__5t0	! b_e_shift	! r__r_2t0
+LSYM(x91)	t0__9a0		! t0__5t0	! b_e_t0	! t0__2t0_a0
+LSYM(x92)	t0__5a0		! t0__2t0_a0	! b_e_4t0	! t0__2t0_a0
+LSYM(x93)	t0__32a0	! t0__t0ma0	! b_e_t0	! t0__3t0
+LSYM(x94)	t0__9a0		! t0__5t0	! b_e_2t0	! t0__t0_2a0
+LSYM(x95)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__5t0
+LSYM(x96)	t0__8a0		! t0__3t0	! b_e_shift	! r__r_4t0
+LSYM(x97)	t0__8a0		! t0__3t0	! b_e_t0	! t0__4t0_a0
+LSYM(x98)	t0__32a0	! t0__3t0	! b_e_t0	! t0__t0_2a0
+LSYM(x99)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__3t0
+LSYM(x100)	t0__5a0		! t0__5t0	! b_e_shift	! r__r_4t0
+LSYM(x101)	t0__5a0		! t0__5t0	! b_e_t0	! t0__4t0_a0
+LSYM(x102)	t0__32a0	! t0__t0_2a0	! b_e_t0	! t0__3t0
+LSYM(x103)	t0__5a0		! t0__5t0	! b_e_t02a0	! t0__4t0_a0
+LSYM(x104)	t0__3a0		! t0__4t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x105)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__5t0
+LSYM(x106)	t0__3a0		! t0__4t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x107)	t0__9a0		! t0__t0_4a0	! b_e_t02a0	! t0__8t0_a0
+LSYM(x108)	t0__9a0		! t0__3t0	! b_e_shift	! r__r_4t0
+LSYM(x109)	t0__9a0		! t0__3t0	! b_e_t0	! t0__4t0_a0
+LSYM(x110)	t0__9a0		! t0__3t0	! b_e_2t0	! t0__2t0_a0
+LSYM(x111)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__3t0
+LSYM(x112)	t0__3a0		! t0__2t0_a0	! b_e_t0	! t0__16t0
+LSYM(x113)	t0__9a0		! t0__4t0_a0	! b_e_t02a0	! t0__3t0
+LSYM(x114)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__3t0
+LSYM(x115)	t0__9a0		! t0__2t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x116)	t0__3a0		! t0__2t0_a0	! b_e_4t0	! t0__4t0_a0
+LSYM(x117)	t0__3a0		! t0__4t0_a0	! b_e_t0	! t0__9t0
+LSYM(x118)	t0__3a0		! t0__4t0_a0	! b_e_t0a0	! t0__9t0
+LSYM(x119)	t0__3a0		! t0__4t0_a0	! b_e_t02a0	! t0__9t0
+LSYM(x120)	t0__5a0		! t0__3t0	! b_e_shift	! r__r_8t0
+LSYM(x121)	t0__5a0		! t0__3t0	! b_e_t0	! t0__8t0_a0
+LSYM(x122)	t0__5a0		! t0__3t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x123)	t0__5a0		! t0__8t0_a0	! b_e_t0	! t0__3t0
+LSYM(x124)	t0__32a0	! t0__t0ma0	! b_e_shift	! r__r_4t0
+LSYM(x125)	t0__5a0		! t0__5t0	! b_e_t0	! t0__5t0
+LSYM(x126)	t0__64a0	! t0__t0ma0	! b_e_shift	! r__r_2t0
+LSYM(x127)	t0__128a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+LSYM(x128)	t0__128a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x129)	t0__128a0	! a1_ne_0_b_l0	! t0__t0_a0	! b_n_ret_t0
+LSYM(x130)	t0__64a0	! t0__t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x131)	t0__8a0		! t0__8t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x132)	t0__8a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x133)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x134)	t0__8a0		! t0__4t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x135)	t0__9a0		! t0__5t0	! b_e_t0	! t0__3t0
+LSYM(x136)	t0__8a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x137)	t0__8a0		! t0__2t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x138)	t0__8a0		! t0__2t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x139)	t0__8a0		! t0__2t0_a0	! b_e_2t0a0	! t0__4t0_a0
+LSYM(x140)	t0__3a0		! t0__2t0_a0	! b_e_4t0	! t0__5t0
+LSYM(x141)	t0__8a0		! t0__2t0_a0	! b_e_4t0a0	! t0__2t0_a0
+LSYM(x142)	t0__9a0		! t0__8t0	! b_e_2t0	! t0__t0ma0
+LSYM(x143)	t0__16a0	! t0__9t0	! b_e_t0	! t0__t0ma0
+LSYM(x144)	t0__9a0		! t0__8t0	! b_e_shift	! r__r_2t0
+LSYM(x145)	t0__9a0		! t0__8t0	! b_e_t0	! t0__2t0_a0
+LSYM(x146)	t0__9a0		! t0__8t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x147)	t0__9a0		! t0__8t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x148)	t0__9a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x149)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x150)	t0__9a0		! t0__4t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x151)	t0__9a0		! t0__4t0_a0	! b_e_2t0a0	! t0__2t0_a0
+LSYM(x152)	t0__9a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x153)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x154)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x155)	t0__32a0	! t0__t0ma0	! b_e_t0	! t0__5t0
+LSYM(x156)	t0__9a0		! t0__2t0_a0	! b_e_4t0	! t0__2t0_a0
+LSYM(x157)	t0__32a0	! t0__t0ma0	! b_e_t02a0	! t0__5t0
+LSYM(x158)	t0__16a0	! t0__5t0	! b_e_2t0	! t0__t0ma0
+LSYM(x159)	t0__32a0	! t0__5t0	! b_e_t0	! t0__t0ma0
+LSYM(x160)	t0__5a0		! t0__4t0	! b_e_shift	! r__r_8t0
+LSYM(x161)	t0__8a0		! t0__5t0	! b_e_t0	! t0__4t0_a0
+LSYM(x162)	t0__9a0		! t0__9t0	! b_e_shift	! r__r_2t0
+LSYM(x163)	t0__9a0		! t0__9t0	! b_e_t0	! t0__2t0_a0
+LSYM(x164)	t0__5a0		! t0__8t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x165)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__5t0
+LSYM(x166)	t0__5a0		! t0__8t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x167)	t0__5a0		! t0__8t0_a0	! b_e_2t0a0	! t0__2t0_a0
+LSYM(x168)	t0__5a0		! t0__4t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x169)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x170)	t0__32a0	! t0__t0_2a0	! b_e_t0	! t0__5t0
+LSYM(x171)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__9t0
+LSYM(x172)	t0__5a0		! t0__4t0_a0	! b_e_4t0	! t0__2t0_a0
+LSYM(x173)	t0__9a0		! t0__2t0_a0	! b_e_t02a0	! t0__9t0
+LSYM(x174)	t0__32a0	! t0__t0_2a0	! b_e_t04a0	! t0__5t0
+LSYM(x175)	t0__8a0		! t0__2t0_a0	! b_e_5t0	! t0__2t0_a0
+LSYM(x176)	t0__5a0		! t0__4t0_a0	! b_e_8t0	! t0__t0_a0
+LSYM(x177)	t0__5a0		! t0__4t0_a0	! b_e_8t0a0	! t0__t0_a0
+LSYM(x178)	t0__5a0		! t0__2t0_a0	! b_e_2t0	! t0__8t0_a0
+LSYM(x179)	t0__5a0		! t0__2t0_a0	! b_e_2t0a0	! t0__8t0_a0
+LSYM(x180)	t0__9a0		! t0__5t0	! b_e_shift	! r__r_4t0
+LSYM(x181)	t0__9a0		! t0__5t0	! b_e_t0	! t0__4t0_a0
+LSYM(x182)	t0__9a0		! t0__5t0	! b_e_2t0	! t0__2t0_a0
+LSYM(x183)	t0__9a0		! t0__5t0	! b_e_2t0a0	! t0__2t0_a0
+LSYM(x184)	t0__5a0		! t0__9t0	! b_e_4t0	! t0__t0_a0
+LSYM(x185)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__5t0
+LSYM(x186)	t0__32a0	! t0__t0ma0	! b_e_2t0	! t0__3t0
+LSYM(x187)	t0__9a0		! t0__4t0_a0	! b_e_t02a0	! t0__5t0
+LSYM(x188)	t0__9a0		! t0__5t0	! b_e_4t0	! t0__t0_2a0
+LSYM(x189)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__9t0
+LSYM(x190)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__5t0
+LSYM(x191)	t0__64a0	! t0__3t0	! b_e_t0	! t0__t0ma0
+LSYM(x192)	t0__8a0		! t0__3t0	! b_e_shift	! r__r_8t0
+LSYM(x193)	t0__8a0		! t0__3t0	! b_e_t0	! t0__8t0_a0
+LSYM(x194)	t0__8a0		! t0__3t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x195)	t0__8a0		! t0__8t0_a0	! b_e_t0	! t0__3t0
+LSYM(x196)	t0__8a0		! t0__3t0	! b_e_4t0	! t0__2t0_a0
+LSYM(x197)	t0__8a0		! t0__3t0	! b_e_4t0a0	! t0__2t0_a0
+LSYM(x198)	t0__64a0	! t0__t0_2a0	! b_e_t0	! t0__3t0
+LSYM(x199)	t0__8a0		! t0__4t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x200)	t0__5a0		! t0__5t0	! b_e_shift	! r__r_8t0
+LSYM(x201)	t0__5a0		! t0__5t0	! b_e_t0	! t0__8t0_a0
+LSYM(x202)	t0__5a0		! t0__5t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x203)	t0__5a0		! t0__5t0	! b_e_2t0a0	! t0__4t0_a0
+LSYM(x204)	t0__8a0		! t0__2t0_a0	! b_e_4t0	! t0__3t0
+LSYM(x205)	t0__5a0		! t0__8t0_a0	! b_e_t0	! t0__5t0
+LSYM(x206)	t0__64a0	! t0__t0_4a0	! b_e_t02a0	! t0__3t0
+LSYM(x207)	t0__8a0		! t0__2t0_a0	! b_e_3t0	! t0__4t0_a0
+LSYM(x208)	t0__5a0		! t0__5t0	! b_e_8t0	! t0__t0_a0
+LSYM(x209)	t0__5a0		! t0__5t0	! b_e_8t0a0	! t0__t0_a0
+LSYM(x210)	t0__5a0		! t0__4t0_a0	! b_e_2t0	! t0__5t0
+LSYM(x211)	t0__5a0		! t0__4t0_a0	! b_e_2t0a0	! t0__5t0
+LSYM(x212)	t0__3a0		! t0__4t0_a0	! b_e_4t0	! t0__4t0_a0
+LSYM(x213)	t0__3a0		! t0__4t0_a0	! b_e_4t0a0	! t0__4t0_a0
+LSYM(x214)	t0__9a0		! t0__t0_4a0	! b_e_2t04a0	! t0__8t0_a0
+LSYM(x215)	t0__5a0		! t0__4t0_a0	! b_e_5t0	! t0__2t0_a0
+LSYM(x216)	t0__9a0		! t0__3t0	! b_e_shift	! r__r_8t0
+LSYM(x217)	t0__9a0		! t0__3t0	! b_e_t0	! t0__8t0_a0
+LSYM(x218)	t0__9a0		! t0__3t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x219)	t0__9a0		! t0__8t0_a0	! b_e_t0	! t0__3t0
+LSYM(x220)	t0__3a0		! t0__9t0	! b_e_4t0	! t0__2t0_a0
+LSYM(x221)	t0__3a0		! t0__9t0	! b_e_4t0a0	! t0__2t0_a0
+LSYM(x222)	t0__9a0		! t0__4t0_a0	! b_e_2t0	! t0__3t0
+LSYM(x223)	t0__9a0		! t0__4t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x224)	t0__9a0		! t0__3t0	! b_e_8t0	! t0__t0_a0
+LSYM(x225)	t0__9a0		! t0__5t0	! b_e_t0	! t0__5t0
+LSYM(x226)	t0__3a0		! t0__2t0_a0	! b_e_t02a0	! t0__32t0
+LSYM(x227)	t0__9a0		! t0__5t0	! b_e_t02a0	! t0__5t0
+LSYM(x228)	t0__9a0		! t0__2t0_a0	! b_e_4t0	! t0__3t0
+LSYM(x229)	t0__9a0		! t0__2t0_a0	! b_e_4t0a0	! t0__3t0
+LSYM(x230)	t0__9a0		! t0__5t0	! b_e_5t0	! t0__t0_a0
+LSYM(x231)	t0__9a0		! t0__2t0_a0	! b_e_3t0	! t0__4t0_a0
+LSYM(x232)	t0__3a0		! t0__2t0_a0	! b_e_8t0	! t0__4t0_a0
+LSYM(x233)	t0__3a0		! t0__2t0_a0	! b_e_8t0a0	! t0__4t0_a0
+LSYM(x234)	t0__3a0		! t0__4t0_a0	! b_e_2t0	! t0__9t0
+LSYM(x235)	t0__3a0		! t0__4t0_a0	! b_e_2t0a0	! t0__9t0
+LSYM(x236)	t0__9a0		! t0__2t0_a0	! b_e_4t08a0	! t0__3t0
+LSYM(x237)	t0__16a0	! t0__5t0	! b_e_3t0	! t0__t0ma0
+LSYM(x238)	t0__3a0		! t0__4t0_a0	! b_e_2t04a0	! t0__9t0
+LSYM(x239)	t0__16a0	! t0__5t0	! b_e_t0ma0	! t0__3t0
+LSYM(x240)	t0__9a0		! t0__t0_a0	! b_e_8t0	! t0__3t0
+LSYM(x241)	t0__9a0		! t0__t0_a0	! b_e_8t0a0	! t0__3t0
+LSYM(x242)	t0__5a0		! t0__3t0	! b_e_2t0	! t0__8t0_a0
+LSYM(x243)	t0__9a0		! t0__9t0	! b_e_t0	! t0__3t0
+LSYM(x244)	t0__5a0		! t0__3t0	! b_e_4t0	! t0__4t0_a0
+LSYM(x245)	t0__8a0		! t0__3t0	! b_e_5t0	! t0__2t0_a0
+LSYM(x246)	t0__5a0		! t0__8t0_a0	! b_e_2t0	! t0__3t0
+LSYM(x247)	t0__5a0		! t0__8t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x248)	t0__32a0	! t0__t0ma0	! b_e_shift	! r__r_8t0
+LSYM(x249)	t0__32a0	! t0__t0ma0	! b_e_t0	! t0__8t0_a0
+LSYM(x250)	t0__5a0		! t0__5t0	! b_e_2t0	! t0__5t0
+LSYM(x251)	t0__5a0		! t0__5t0	! b_e_2t0a0	! t0__5t0
+LSYM(x252)	t0__64a0	! t0__t0ma0	! b_e_shift	! r__r_4t0
+LSYM(x253)	t0__64a0	! t0__t0ma0	! b_e_t0	! t0__4t0_a0
+LSYM(x254)	t0__128a0	! t0__t0ma0	! b_e_shift	! r__r_2t0
+LSYM(x255)	t0__256a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+/*1040 insts before this.  */
+LSYM(ret_t0)	MILLIRET
+LSYM(e_t0)	r__r_t0
+LSYM(e_shift)	a1_ne_0_b_l2
+	a0__256a0	/* a0 <<= 8 *********** */
+	MILLIRETN
+LSYM(e_t0ma0)	a1_ne_0_b_l0
+	t0__t0ma0
+	MILLIRET
+	r__r_t0
+LSYM(e_t0a0)	a1_ne_0_b_l0
+	t0__t0_a0
+	MILLIRET
+	r__r_t0
+LSYM(e_t02a0)	a1_ne_0_b_l0
+	t0__t0_2a0
+	MILLIRET
+	r__r_t0
+LSYM(e_t04a0)	a1_ne_0_b_l0
+	t0__t0_4a0
+	MILLIRET
+	r__r_t0
+LSYM(e_2t0)	a1_ne_0_b_l1
+	r__r_2t0
+	MILLIRETN
+LSYM(e_2t0a0)	a1_ne_0_b_l0
+	t0__2t0_a0
+	MILLIRET
+	r__r_t0
+LSYM(e2t04a0)	t0__t0_2a0
+	a1_ne_0_b_l1
+	r__r_2t0
+	MILLIRETN
+LSYM(e_3t0)	a1_ne_0_b_l0
+	t0__3t0
+	MILLIRET
+	r__r_t0
+LSYM(e_4t0)	a1_ne_0_b_l1
+	r__r_4t0
+	MILLIRETN
+LSYM(e_4t0a0)	a1_ne_0_b_l0
+	t0__4t0_a0
+	MILLIRET
+	r__r_t0
+LSYM(e4t08a0)	t0__t0_2a0
+	a1_ne_0_b_l1
+	r__r_4t0
+	MILLIRETN
+LSYM(e_5t0)	a1_ne_0_b_l0
+	t0__5t0
+	MILLIRET
+	r__r_t0
+LSYM(e_8t0)	a1_ne_0_b_l1
+	r__r_8t0
+	MILLIRETN
+LSYM(e_8t0a0)	a1_ne_0_b_l0
+	t0__8t0_a0
+	MILLIRET
+	r__r_t0
+
+	.procend
+	.end
+#endif
diff --git a/arch/parisc/lib/milli/milli.h b/arch/parisc/lib/milli/milli.h
new file mode 100644
index 0000000..19ac79f
--- /dev/null
+++ b/arch/parisc/lib/milli/milli.h
@@ -0,0 +1,165 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#ifndef _PA_MILLI_H_
+#define _PA_MILLI_H_
+
+#define L_dyncall
+#define L_divI
+#define L_divU
+#define L_remI
+#define L_remU
+#define L_div_const
+#define L_mulI
+
+#ifdef CONFIG_64BIT
+        .level  2.0w
+#endif
+
+/* Hardware General Registers.  */
+r0:	.reg	%r0
+r1:	.reg	%r1
+r2:	.reg	%r2
+r3:	.reg	%r3
+r4:	.reg	%r4
+r5:	.reg	%r5
+r6:	.reg	%r6
+r7:	.reg	%r7
+r8:	.reg	%r8
+r9:	.reg	%r9
+r10:	.reg	%r10
+r11:	.reg	%r11
+r12:	.reg	%r12
+r13:	.reg	%r13
+r14:	.reg	%r14
+r15:	.reg	%r15
+r16:	.reg	%r16
+r17:	.reg	%r17
+r18:	.reg	%r18
+r19:	.reg	%r19
+r20:	.reg	%r20
+r21:	.reg	%r21
+r22:	.reg	%r22
+r23:	.reg	%r23
+r24:	.reg	%r24
+r25:	.reg	%r25
+r26:	.reg	%r26
+r27:	.reg	%r27
+r28:	.reg	%r28
+r29:	.reg	%r29
+r30:	.reg	%r30
+r31:	.reg	%r31
+
+/* Hardware Space Registers.  */
+sr0:	.reg	%sr0
+sr1:	.reg	%sr1
+sr2:	.reg	%sr2
+sr3:	.reg	%sr3
+sr4:	.reg	%sr4
+sr5:	.reg	%sr5
+sr6:	.reg	%sr6
+sr7:	.reg	%sr7
+
+/* Hardware Floating Point Registers.  */
+fr0:	.reg	%fr0
+fr1:	.reg	%fr1
+fr2:	.reg	%fr2
+fr3:	.reg	%fr3
+fr4:	.reg	%fr4
+fr5:	.reg	%fr5
+fr6:	.reg	%fr6
+fr7:	.reg	%fr7
+fr8:	.reg	%fr8
+fr9:	.reg	%fr9
+fr10:	.reg	%fr10
+fr11:	.reg	%fr11
+fr12:	.reg	%fr12
+fr13:	.reg	%fr13
+fr14:	.reg	%fr14
+fr15:	.reg	%fr15
+
+/* Hardware Control Registers.  */
+cr11:	.reg	%cr11
+sar:	.reg	%cr11	/* Shift Amount Register */
+
+/* Software Architecture General Registers.  */
+rp:	.reg    r2	/* return pointer */
+#ifdef CONFIG_64BIT
+mrp:	.reg	r2 	/* millicode return pointer */
+#else
+mrp:	.reg	r31	/* millicode return pointer */
+#endif
+ret0:	.reg    r28	/* return value */
+ret1:	.reg    r29	/* return value (high part of double) */
+sp:	.reg 	r30	/* stack pointer */
+dp:	.reg	r27	/* data pointer */
+arg0:	.reg	r26	/* argument */
+arg1:	.reg	r25	/* argument or high part of double argument */
+arg2:	.reg	r24	/* argument */
+arg3:	.reg	r23	/* argument or high part of double argument */
+
+/* Software Architecture Space Registers.  */
+/* 		sr0	; return link from BLE */
+sret:	.reg	sr1	/* return value */
+sarg:	.reg	sr1	/* argument */
+/* 		sr4	; PC SPACE tracker */
+/* 		sr5	; process private data */
+
+/* Frame Offsets (millicode convention!)  Used when calling other
+   millicode routines.  Stack unwinding is dependent upon these
+   definitions.  */
+r31_slot:	.equ	-20	/* "current RP" slot */
+sr0_slot:	.equ	-16     /* "static link" slot */
+#if defined(CONFIG_64BIT)
+mrp_slot:       .equ    -16	/* "current RP" slot */
+psp_slot:       .equ    -8	/* "previous SP" slot */
+#else
+mrp_slot:	.equ	-20     /* "current RP" slot (replacing "r31_slot") */
+#endif
+
+
+#define DEFINE(name,value)name:	.EQU	value
+#define RDEFINE(name,value)name:	.REG	value
+#ifdef milliext
+#define MILLI_BE(lbl)   BE    lbl(sr7,r0)
+#define MILLI_BEN(lbl)  BE,n  lbl(sr7,r0)
+#define MILLI_BLE(lbl)	BLE   lbl(sr7,r0)
+#define MILLI_BLEN(lbl)	BLE,n lbl(sr7,r0)
+#define MILLIRETN	BE,n  0(sr0,mrp)
+#define MILLIRET	BE    0(sr0,mrp)
+#define MILLI_RETN	BE,n  0(sr0,mrp)
+#define MILLI_RET	BE    0(sr0,mrp)
+#else
+#define MILLI_BE(lbl)	B     lbl
+#define MILLI_BEN(lbl)  B,n   lbl
+#define MILLI_BLE(lbl)	BL    lbl,mrp
+#define MILLI_BLEN(lbl)	BL,n  lbl,mrp
+#define MILLIRETN	BV,n  0(mrp)
+#define MILLIRET	BV    0(mrp)
+#define MILLI_RETN	BV,n  0(mrp)
+#define MILLI_RET	BV    0(mrp)
+#endif
+
+#define CAT(a,b)	a##b
+
+#define SUBSPA_MILLI	 .section .text
+#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16
+#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16
+#define ATTR_MILLI
+#define SUBSPA_DATA	 .section .data
+#define ATTR_DATA
+#define GLOBAL		 $global$
+#define GSYM(sym) 	 !sym:
+#define LSYM(sym)	 !CAT(.L,sym:)
+#define LREF(sym)	 CAT(.L,sym)
+
+#endif /*_PA_MILLI_H_*/
diff --git a/arch/parisc/lib/milli/mulI.S b/arch/parisc/lib/milli/mulI.S
new file mode 100644
index 0000000..4c7e0c3
--- /dev/null
+++ b/arch/parisc/lib/milli/mulI.S
@@ -0,0 +1,474 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_mulI
+/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */
+/******************************************************************************
+This routine is used on PA2.0 processors when gcc -mno-fpregs is used
+
+ROUTINE:	$$mulI
+
+
+DESCRIPTION:	
+
+	$$mulI multiplies two single word integers, giving a single 
+	word result.  
+
+
+INPUT REGISTERS:
+
+	arg0 = Operand 1
+	arg1 = Operand 2
+	r31  == return pc
+	sr0  == return space when called externally 
+
+
+OUTPUT REGISTERS:
+
+	arg0 = undefined
+	arg1 = undefined
+	ret1 = result 
+
+OTHER REGISTERS AFFECTED:
+
+	r1   = undefined
+
+SIDE EFFECTS:
+
+	Causes a trap under the following conditions:  NONE
+	Changes memory at the following places:  NONE
+
+PERMISSIBLE CONTEXT:
+
+	Unwindable
+	Does not create a stack frame
+	Is usable for internal or external microcode
+
+DISCUSSION:
+
+	Calls other millicode routines via mrp:  NONE
+	Calls other millicode routines:  NONE
+
+***************************************************************************/
+
+
+#define	a0	%arg0
+#define	a1	%arg1
+#define	t0	%r1
+#define	r	%ret1
+
+#define	a0__128a0	zdep	a0,24,25,a0
+#define	a0__256a0	zdep	a0,23,24,a0
+#define	a1_ne_0_b_l0	comb,<>	a1,0,LREF(l0)
+#define	a1_ne_0_b_l1	comb,<>	a1,0,LREF(l1)
+#define	a1_ne_0_b_l2	comb,<>	a1,0,LREF(l2)
+#define	b_n_ret_t0	b,n	LREF(ret_t0)
+#define	b_e_shift	b	LREF(e_shift)
+#define	b_e_t0ma0	b	LREF(e_t0ma0)
+#define	b_e_t0		b	LREF(e_t0)
+#define	b_e_t0a0	b	LREF(e_t0a0)
+#define	b_e_t02a0	b	LREF(e_t02a0)
+#define	b_e_t04a0	b	LREF(e_t04a0)
+#define	b_e_2t0		b	LREF(e_2t0)
+#define	b_e_2t0a0	b	LREF(e_2t0a0)
+#define	b_e_2t04a0	b	LREF(e2t04a0)
+#define	b_e_3t0		b	LREF(e_3t0)
+#define	b_e_4t0		b	LREF(e_4t0)
+#define	b_e_4t0a0	b	LREF(e_4t0a0)
+#define	b_e_4t08a0	b	LREF(e4t08a0)
+#define	b_e_5t0		b	LREF(e_5t0)
+#define	b_e_8t0		b	LREF(e_8t0)
+#define	b_e_8t0a0	b	LREF(e_8t0a0)
+#define	r__r_a0		add	r,a0,r
+#define	r__r_2a0	sh1add	a0,r,r
+#define	r__r_4a0	sh2add	a0,r,r
+#define	r__r_8a0	sh3add	a0,r,r
+#define	r__r_t0		add	r,t0,r
+#define	r__r_2t0	sh1add	t0,r,r
+#define	r__r_4t0	sh2add	t0,r,r
+#define	r__r_8t0	sh3add	t0,r,r
+#define	t0__3a0		sh1add	a0,a0,t0
+#define	t0__4a0		sh2add	a0,0,t0
+#define	t0__5a0		sh2add	a0,a0,t0
+#define	t0__8a0		sh3add	a0,0,t0
+#define	t0__9a0		sh3add	a0,a0,t0
+#define	t0__16a0	zdep	a0,27,28,t0
+#define	t0__32a0	zdep	a0,26,27,t0
+#define	t0__64a0	zdep	a0,25,26,t0
+#define	t0__128a0	zdep	a0,24,25,t0
+#define	t0__t0ma0	sub	t0,a0,t0
+#define	t0__t0_a0	add	t0,a0,t0
+#define	t0__t0_2a0	sh1add	a0,t0,t0
+#define	t0__t0_4a0	sh2add	a0,t0,t0
+#define	t0__t0_8a0	sh3add	a0,t0,t0
+#define	t0__2t0_a0	sh1add	t0,a0,t0
+#define	t0__3t0		sh1add	t0,t0,t0
+#define	t0__4t0		sh2add	t0,0,t0
+#define	t0__4t0_a0	sh2add	t0,a0,t0
+#define	t0__5t0		sh2add	t0,t0,t0
+#define	t0__8t0		sh3add	t0,0,t0
+#define	t0__8t0_a0	sh3add	t0,a0,t0
+#define	t0__9t0		sh3add	t0,t0,t0
+#define	t0__16t0	zdep	t0,27,28,t0
+#define	t0__32t0	zdep	t0,26,27,t0
+#define	t0__256a0	zdep	a0,23,24,t0
+
+
+	SUBSPA_MILLI
+	ATTR_MILLI
+	.align 16
+	.proc
+	.callinfo millicode
+	.export $$mulI,millicode
+GSYM($$mulI)	
+	combt,<<=	a1,a0,LREF(l4)	/* swap args if unsigned a1>a0 */
+	copy		0,r		/* zero out the result */
+	xor		a0,a1,a0	/* swap a0 & a1 using the */
+	xor		a0,a1,a1	/*  old xor trick */
+	xor		a0,a1,a0
+LSYM(l4)
+	combt,<=	0,a0,LREF(l3)		/* if a0>=0 then proceed like unsigned */
+	zdep		a1,30,8,t0	/* t0 = (a1&0xff)<<1 ********* */
+	sub,>		0,a1,t0		/* otherwise negate both and */
+	combt,<=,n	a0,t0,LREF(l2)	/*  swap back if |a0|<|a1| */
+	sub		0,a0,a1
+	movb,tr,n	t0,a0,LREF(l2)	/* 10th inst.  */
+
+LSYM(l0)	r__r_t0				/* add in this partial product */
+LSYM(l1)	a0__256a0			/* a0 <<= 8 ****************** */
+LSYM(l2)	zdep		a1,30,8,t0	/* t0 = (a1&0xff)<<1 ********* */
+LSYM(l3)	blr		t0,0		/* case on these 8 bits ****** */
+		extru		a1,23,24,a1	/* a1 >>= 8 ****************** */
+
+/*16 insts before this.  */
+/*			  a0 <<= 8 ************************** */
+LSYM(x0)	a1_ne_0_b_l2	! a0__256a0	! MILLIRETN	! nop
+LSYM(x1)	a1_ne_0_b_l1	! r__r_a0	! MILLIRETN	! nop
+LSYM(x2)	a1_ne_0_b_l1	! r__r_2a0	! MILLIRETN	! nop
+LSYM(x3)	a1_ne_0_b_l0	! t0__3a0	! MILLIRET	! r__r_t0
+LSYM(x4)	a1_ne_0_b_l1	! r__r_4a0	! MILLIRETN	! nop
+LSYM(x5)	a1_ne_0_b_l0	! t0__5a0	! MILLIRET	! r__r_t0
+LSYM(x6)	t0__3a0		! a1_ne_0_b_l1	! r__r_2t0	! MILLIRETN
+LSYM(x7)	t0__3a0		! a1_ne_0_b_l0	! r__r_4a0	! b_n_ret_t0
+LSYM(x8)	a1_ne_0_b_l1	! r__r_8a0	! MILLIRETN	! nop
+LSYM(x9)	a1_ne_0_b_l0	! t0__9a0	! MILLIRET	! r__r_t0
+LSYM(x10)	t0__5a0		! a1_ne_0_b_l1	! r__r_2t0	! MILLIRETN
+LSYM(x11)	t0__3a0		! a1_ne_0_b_l0	! r__r_8a0	! b_n_ret_t0
+LSYM(x12)	t0__3a0		! a1_ne_0_b_l1	! r__r_4t0	! MILLIRETN
+LSYM(x13)	t0__5a0		! a1_ne_0_b_l0	! r__r_8a0	! b_n_ret_t0
+LSYM(x14)	t0__3a0		! t0__2t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x15)	t0__5a0		! a1_ne_0_b_l0	! t0__3t0	! b_n_ret_t0
+LSYM(x16)	t0__16a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x17)	t0__9a0		! a1_ne_0_b_l0	! t0__t0_8a0	! b_n_ret_t0
+LSYM(x18)	t0__9a0		! a1_ne_0_b_l1	! r__r_2t0	! MILLIRETN
+LSYM(x19)	t0__9a0		! a1_ne_0_b_l0	! t0__2t0_a0	! b_n_ret_t0
+LSYM(x20)	t0__5a0		! a1_ne_0_b_l1	! r__r_4t0	! MILLIRETN
+LSYM(x21)	t0__5a0		! a1_ne_0_b_l0	! t0__4t0_a0	! b_n_ret_t0
+LSYM(x22)	t0__5a0		! t0__2t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x23)	t0__5a0		! t0__2t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x24)	t0__3a0		! a1_ne_0_b_l1	! r__r_8t0	! MILLIRETN
+LSYM(x25)	t0__5a0		! a1_ne_0_b_l0	! t0__5t0	! b_n_ret_t0
+LSYM(x26)	t0__3a0		! t0__4t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x27)	t0__3a0		! a1_ne_0_b_l0	! t0__9t0	! b_n_ret_t0
+LSYM(x28)	t0__3a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x29)	t0__3a0		! t0__2t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x30)	t0__5a0		! t0__3t0	! b_e_shift	! r__r_2t0
+LSYM(x31)	t0__32a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+LSYM(x32)	t0__32a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x33)	t0__8a0		! a1_ne_0_b_l0	! t0__4t0_a0	! b_n_ret_t0
+LSYM(x34)	t0__16a0	! t0__t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x35)	t0__9a0		! t0__3t0	! b_e_t0	! t0__t0_8a0
+LSYM(x36)	t0__9a0		! a1_ne_0_b_l1	! r__r_4t0	! MILLIRETN
+LSYM(x37)	t0__9a0		! a1_ne_0_b_l0	! t0__4t0_a0	! b_n_ret_t0
+LSYM(x38)	t0__9a0		! t0__2t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x39)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x40)	t0__5a0		! a1_ne_0_b_l1	! r__r_8t0	! MILLIRETN
+LSYM(x41)	t0__5a0		! a1_ne_0_b_l0	! t0__8t0_a0	! b_n_ret_t0
+LSYM(x42)	t0__5a0		! t0__4t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x43)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x44)	t0__5a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x45)	t0__9a0		! a1_ne_0_b_l0	! t0__5t0	! b_n_ret_t0
+LSYM(x46)	t0__9a0		! t0__5t0	! b_e_t0	! t0__t0_a0
+LSYM(x47)	t0__9a0		! t0__5t0	! b_e_t0	! t0__t0_2a0
+LSYM(x48)	t0__3a0		! a1_ne_0_b_l0	! t0__16t0	! b_n_ret_t0
+LSYM(x49)	t0__9a0		! t0__5t0	! b_e_t0	! t0__t0_4a0
+LSYM(x50)	t0__5a0		! t0__5t0	! b_e_shift	! r__r_2t0
+LSYM(x51)	t0__9a0		! t0__t0_8a0	! b_e_t0	! t0__3t0
+LSYM(x52)	t0__3a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x53)	t0__3a0		! t0__4t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x54)	t0__9a0		! t0__3t0	! b_e_shift	! r__r_2t0
+LSYM(x55)	t0__9a0		! t0__3t0	! b_e_t0	! t0__2t0_a0
+LSYM(x56)	t0__3a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x57)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__3t0
+LSYM(x58)	t0__3a0		! t0__2t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x59)	t0__9a0		! t0__2t0_a0	! b_e_t02a0	! t0__3t0
+LSYM(x60)	t0__5a0		! t0__3t0	! b_e_shift	! r__r_4t0
+LSYM(x61)	t0__5a0		! t0__3t0	! b_e_t0	! t0__4t0_a0
+LSYM(x62)	t0__32a0	! t0__t0ma0	! b_e_shift	! r__r_2t0
+LSYM(x63)	t0__64a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+LSYM(x64)	t0__64a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x65)	t0__8a0		! a1_ne_0_b_l0	! t0__8t0_a0	! b_n_ret_t0
+LSYM(x66)	t0__32a0	! t0__t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x67)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x68)	t0__8a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x69)	t0__8a0		! t0__2t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x70)	t0__64a0	! t0__t0_4a0	! b_e_t0	! t0__t0_2a0
+LSYM(x71)	t0__9a0		! t0__8t0	! b_e_t0	! t0__t0ma0
+LSYM(x72)	t0__9a0		! a1_ne_0_b_l1	! r__r_8t0	! MILLIRETN
+LSYM(x73)	t0__9a0		! t0__8t0_a0	! b_e_shift	! r__r_t0
+LSYM(x74)	t0__9a0		! t0__4t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x75)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x76)	t0__9a0		! t0__2t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x77)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x78)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x79)	t0__16a0	! t0__5t0	! b_e_t0	! t0__t0ma0
+LSYM(x80)	t0__16a0	! t0__5t0	! b_e_shift	! r__r_t0
+LSYM(x81)	t0__9a0		! t0__9t0	! b_e_shift	! r__r_t0
+LSYM(x82)	t0__5a0		! t0__8t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x83)	t0__5a0		! t0__8t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x84)	t0__5a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x85)	t0__8a0		! t0__2t0_a0	! b_e_t0	! t0__5t0
+LSYM(x86)	t0__5a0		! t0__4t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x87)	t0__9a0		! t0__9t0	! b_e_t02a0	! t0__t0_4a0
+LSYM(x88)	t0__5a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x89)	t0__5a0		! t0__2t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x90)	t0__9a0		! t0__5t0	! b_e_shift	! r__r_2t0
+LSYM(x91)	t0__9a0		! t0__5t0	! b_e_t0	! t0__2t0_a0
+LSYM(x92)	t0__5a0		! t0__2t0_a0	! b_e_4t0	! t0__2t0_a0
+LSYM(x93)	t0__32a0	! t0__t0ma0	! b_e_t0	! t0__3t0
+LSYM(x94)	t0__9a0		! t0__5t0	! b_e_2t0	! t0__t0_2a0
+LSYM(x95)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__5t0
+LSYM(x96)	t0__8a0		! t0__3t0	! b_e_shift	! r__r_4t0
+LSYM(x97)	t0__8a0		! t0__3t0	! b_e_t0	! t0__4t0_a0
+LSYM(x98)	t0__32a0	! t0__3t0	! b_e_t0	! t0__t0_2a0
+LSYM(x99)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__3t0
+LSYM(x100)	t0__5a0		! t0__5t0	! b_e_shift	! r__r_4t0
+LSYM(x101)	t0__5a0		! t0__5t0	! b_e_t0	! t0__4t0_a0
+LSYM(x102)	t0__32a0	! t0__t0_2a0	! b_e_t0	! t0__3t0
+LSYM(x103)	t0__5a0		! t0__5t0	! b_e_t02a0	! t0__4t0_a0
+LSYM(x104)	t0__3a0		! t0__4t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x105)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__5t0
+LSYM(x106)	t0__3a0		! t0__4t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x107)	t0__9a0		! t0__t0_4a0	! b_e_t02a0	! t0__8t0_a0
+LSYM(x108)	t0__9a0		! t0__3t0	! b_e_shift	! r__r_4t0
+LSYM(x109)	t0__9a0		! t0__3t0	! b_e_t0	! t0__4t0_a0
+LSYM(x110)	t0__9a0		! t0__3t0	! b_e_2t0	! t0__2t0_a0
+LSYM(x111)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__3t0
+LSYM(x112)	t0__3a0		! t0__2t0_a0	! b_e_t0	! t0__16t0
+LSYM(x113)	t0__9a0		! t0__4t0_a0	! b_e_t02a0	! t0__3t0
+LSYM(x114)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__3t0
+LSYM(x115)	t0__9a0		! t0__2t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x116)	t0__3a0		! t0__2t0_a0	! b_e_4t0	! t0__4t0_a0
+LSYM(x117)	t0__3a0		! t0__4t0_a0	! b_e_t0	! t0__9t0
+LSYM(x118)	t0__3a0		! t0__4t0_a0	! b_e_t0a0	! t0__9t0
+LSYM(x119)	t0__3a0		! t0__4t0_a0	! b_e_t02a0	! t0__9t0
+LSYM(x120)	t0__5a0		! t0__3t0	! b_e_shift	! r__r_8t0
+LSYM(x121)	t0__5a0		! t0__3t0	! b_e_t0	! t0__8t0_a0
+LSYM(x122)	t0__5a0		! t0__3t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x123)	t0__5a0		! t0__8t0_a0	! b_e_t0	! t0__3t0
+LSYM(x124)	t0__32a0	! t0__t0ma0	! b_e_shift	! r__r_4t0
+LSYM(x125)	t0__5a0		! t0__5t0	! b_e_t0	! t0__5t0
+LSYM(x126)	t0__64a0	! t0__t0ma0	! b_e_shift	! r__r_2t0
+LSYM(x127)	t0__128a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+LSYM(x128)	t0__128a0	! a1_ne_0_b_l1	! r__r_t0	! MILLIRETN
+LSYM(x129)	t0__128a0	! a1_ne_0_b_l0	! t0__t0_a0	! b_n_ret_t0
+LSYM(x130)	t0__64a0	! t0__t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x131)	t0__8a0		! t0__8t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x132)	t0__8a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x133)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x134)	t0__8a0		! t0__4t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x135)	t0__9a0		! t0__5t0	! b_e_t0	! t0__3t0
+LSYM(x136)	t0__8a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x137)	t0__8a0		! t0__2t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x138)	t0__8a0		! t0__2t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x139)	t0__8a0		! t0__2t0_a0	! b_e_2t0a0	! t0__4t0_a0
+LSYM(x140)	t0__3a0		! t0__2t0_a0	! b_e_4t0	! t0__5t0
+LSYM(x141)	t0__8a0		! t0__2t0_a0	! b_e_4t0a0	! t0__2t0_a0
+LSYM(x142)	t0__9a0		! t0__8t0	! b_e_2t0	! t0__t0ma0
+LSYM(x143)	t0__16a0	! t0__9t0	! b_e_t0	! t0__t0ma0
+LSYM(x144)	t0__9a0		! t0__8t0	! b_e_shift	! r__r_2t0
+LSYM(x145)	t0__9a0		! t0__8t0	! b_e_t0	! t0__2t0_a0
+LSYM(x146)	t0__9a0		! t0__8t0_a0	! b_e_shift	! r__r_2t0
+LSYM(x147)	t0__9a0		! t0__8t0_a0	! b_e_t0	! t0__2t0_a0
+LSYM(x148)	t0__9a0		! t0__4t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x149)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__4t0_a0
+LSYM(x150)	t0__9a0		! t0__4t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x151)	t0__9a0		! t0__4t0_a0	! b_e_2t0a0	! t0__2t0_a0
+LSYM(x152)	t0__9a0		! t0__2t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x153)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x154)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__4t0_a0
+LSYM(x155)	t0__32a0	! t0__t0ma0	! b_e_t0	! t0__5t0
+LSYM(x156)	t0__9a0		! t0__2t0_a0	! b_e_4t0	! t0__2t0_a0
+LSYM(x157)	t0__32a0	! t0__t0ma0	! b_e_t02a0	! t0__5t0
+LSYM(x158)	t0__16a0	! t0__5t0	! b_e_2t0	! t0__t0ma0
+LSYM(x159)	t0__32a0	! t0__5t0	! b_e_t0	! t0__t0ma0
+LSYM(x160)	t0__5a0		! t0__4t0	! b_e_shift	! r__r_8t0
+LSYM(x161)	t0__8a0		! t0__5t0	! b_e_t0	! t0__4t0_a0
+LSYM(x162)	t0__9a0		! t0__9t0	! b_e_shift	! r__r_2t0
+LSYM(x163)	t0__9a0		! t0__9t0	! b_e_t0	! t0__2t0_a0
+LSYM(x164)	t0__5a0		! t0__8t0_a0	! b_e_shift	! r__r_4t0
+LSYM(x165)	t0__8a0		! t0__4t0_a0	! b_e_t0	! t0__5t0
+LSYM(x166)	t0__5a0		! t0__8t0_a0	! b_e_2t0	! t0__2t0_a0
+LSYM(x167)	t0__5a0		! t0__8t0_a0	! b_e_2t0a0	! t0__2t0_a0
+LSYM(x168)	t0__5a0		! t0__4t0_a0	! b_e_shift	! r__r_8t0
+LSYM(x169)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__8t0_a0
+LSYM(x170)	t0__32a0	! t0__t0_2a0	! b_e_t0	! t0__5t0
+LSYM(x171)	t0__9a0		! t0__2t0_a0	! b_e_t0	! t0__9t0
+LSYM(x172)	t0__5a0		! t0__4t0_a0	! b_e_4t0	! t0__2t0_a0
+LSYM(x173)	t0__9a0		! t0__2t0_a0	! b_e_t02a0	! t0__9t0
+LSYM(x174)	t0__32a0	! t0__t0_2a0	! b_e_t04a0	! t0__5t0
+LSYM(x175)	t0__8a0		! t0__2t0_a0	! b_e_5t0	! t0__2t0_a0
+LSYM(x176)	t0__5a0		! t0__4t0_a0	! b_e_8t0	! t0__t0_a0
+LSYM(x177)	t0__5a0		! t0__4t0_a0	! b_e_8t0a0	! t0__t0_a0
+LSYM(x178)	t0__5a0		! t0__2t0_a0	! b_e_2t0	! t0__8t0_a0
+LSYM(x179)	t0__5a0		! t0__2t0_a0	! b_e_2t0a0	! t0__8t0_a0
+LSYM(x180)	t0__9a0		! t0__5t0	! b_e_shift	! r__r_4t0
+LSYM(x181)	t0__9a0		! t0__5t0	! b_e_t0	! t0__4t0_a0
+LSYM(x182)	t0__9a0		! t0__5t0	! b_e_2t0	! t0__2t0_a0
+LSYM(x183)	t0__9a0		! t0__5t0	! b_e_2t0a0	! t0__2t0_a0
+LSYM(x184)	t0__5a0		! t0__9t0	! b_e_4t0	! t0__t0_a0
+LSYM(x185)	t0__9a0		! t0__4t0_a0	! b_e_t0	! t0__5t0
+LSYM(x186)	t0__32a0	! t0__t0ma0	! b_e_2t0	! t0__3t0
+LSYM(x187)	t0__9a0		! t0__4t0_a0	! b_e_t02a0	! t0__5t0
+LSYM(x188)	t0__9a0		! t0__5t0	! b_e_4t0	! t0__t0_2a0
+LSYM(x189)	t0__5a0		! t0__4t0_a0	! b_e_t0	! t0__9t0
+LSYM(x190)	t0__9a0		! t0__2t0_a0	! b_e_2t0	! t0__5t0
+LSYM(x191)	t0__64a0	! t0__3t0	! b_e_t0	! t0__t0ma0
+LSYM(x192)	t0__8a0		! t0__3t0	! b_e_shift	! r__r_8t0
+LSYM(x193)	t0__8a0		! t0__3t0	! b_e_t0	! t0__8t0_a0
+LSYM(x194)	t0__8a0		! t0__3t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x195)	t0__8a0		! t0__8t0_a0	! b_e_t0	! t0__3t0
+LSYM(x196)	t0__8a0		! t0__3t0	! b_e_4t0	! t0__2t0_a0
+LSYM(x197)	t0__8a0		! t0__3t0	! b_e_4t0a0	! t0__2t0_a0
+LSYM(x198)	t0__64a0	! t0__t0_2a0	! b_e_t0	! t0__3t0
+LSYM(x199)	t0__8a0		! t0__4t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x200)	t0__5a0		! t0__5t0	! b_e_shift	! r__r_8t0
+LSYM(x201)	t0__5a0		! t0__5t0	! b_e_t0	! t0__8t0_a0
+LSYM(x202)	t0__5a0		! t0__5t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x203)	t0__5a0		! t0__5t0	! b_e_2t0a0	! t0__4t0_a0
+LSYM(x204)	t0__8a0		! t0__2t0_a0	! b_e_4t0	! t0__3t0
+LSYM(x205)	t0__5a0		! t0__8t0_a0	! b_e_t0	! t0__5t0
+LSYM(x206)	t0__64a0	! t0__t0_4a0	! b_e_t02a0	! t0__3t0
+LSYM(x207)	t0__8a0		! t0__2t0_a0	! b_e_3t0	! t0__4t0_a0
+LSYM(x208)	t0__5a0		! t0__5t0	! b_e_8t0	! t0__t0_a0
+LSYM(x209)	t0__5a0		! t0__5t0	! b_e_8t0a0	! t0__t0_a0
+LSYM(x210)	t0__5a0		! t0__4t0_a0	! b_e_2t0	! t0__5t0
+LSYM(x211)	t0__5a0		! t0__4t0_a0	! b_e_2t0a0	! t0__5t0
+LSYM(x212)	t0__3a0		! t0__4t0_a0	! b_e_4t0	! t0__4t0_a0
+LSYM(x213)	t0__3a0		! t0__4t0_a0	! b_e_4t0a0	! t0__4t0_a0
+LSYM(x214)	t0__9a0		! t0__t0_4a0	! b_e_2t04a0	! t0__8t0_a0
+LSYM(x215)	t0__5a0		! t0__4t0_a0	! b_e_5t0	! t0__2t0_a0
+LSYM(x216)	t0__9a0		! t0__3t0	! b_e_shift	! r__r_8t0
+LSYM(x217)	t0__9a0		! t0__3t0	! b_e_t0	! t0__8t0_a0
+LSYM(x218)	t0__9a0		! t0__3t0	! b_e_2t0	! t0__4t0_a0
+LSYM(x219)	t0__9a0		! t0__8t0_a0	! b_e_t0	! t0__3t0
+LSYM(x220)	t0__3a0		! t0__9t0	! b_e_4t0	! t0__2t0_a0
+LSYM(x221)	t0__3a0		! t0__9t0	! b_e_4t0a0	! t0__2t0_a0
+LSYM(x222)	t0__9a0		! t0__4t0_a0	! b_e_2t0	! t0__3t0
+LSYM(x223)	t0__9a0		! t0__4t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x224)	t0__9a0		! t0__3t0	! b_e_8t0	! t0__t0_a0
+LSYM(x225)	t0__9a0		! t0__5t0	! b_e_t0	! t0__5t0
+LSYM(x226)	t0__3a0		! t0__2t0_a0	! b_e_t02a0	! t0__32t0
+LSYM(x227)	t0__9a0		! t0__5t0	! b_e_t02a0	! t0__5t0
+LSYM(x228)	t0__9a0		! t0__2t0_a0	! b_e_4t0	! t0__3t0
+LSYM(x229)	t0__9a0		! t0__2t0_a0	! b_e_4t0a0	! t0__3t0
+LSYM(x230)	t0__9a0		! t0__5t0	! b_e_5t0	! t0__t0_a0
+LSYM(x231)	t0__9a0		! t0__2t0_a0	! b_e_3t0	! t0__4t0_a0
+LSYM(x232)	t0__3a0		! t0__2t0_a0	! b_e_8t0	! t0__4t0_a0
+LSYM(x233)	t0__3a0		! t0__2t0_a0	! b_e_8t0a0	! t0__4t0_a0
+LSYM(x234)	t0__3a0		! t0__4t0_a0	! b_e_2t0	! t0__9t0
+LSYM(x235)	t0__3a0		! t0__4t0_a0	! b_e_2t0a0	! t0__9t0
+LSYM(x236)	t0__9a0		! t0__2t0_a0	! b_e_4t08a0	! t0__3t0
+LSYM(x237)	t0__16a0	! t0__5t0	! b_e_3t0	! t0__t0ma0
+LSYM(x238)	t0__3a0		! t0__4t0_a0	! b_e_2t04a0	! t0__9t0
+LSYM(x239)	t0__16a0	! t0__5t0	! b_e_t0ma0	! t0__3t0
+LSYM(x240)	t0__9a0		! t0__t0_a0	! b_e_8t0	! t0__3t0
+LSYM(x241)	t0__9a0		! t0__t0_a0	! b_e_8t0a0	! t0__3t0
+LSYM(x242)	t0__5a0		! t0__3t0	! b_e_2t0	! t0__8t0_a0
+LSYM(x243)	t0__9a0		! t0__9t0	! b_e_t0	! t0__3t0
+LSYM(x244)	t0__5a0		! t0__3t0	! b_e_4t0	! t0__4t0_a0
+LSYM(x245)	t0__8a0		! t0__3t0	! b_e_5t0	! t0__2t0_a0
+LSYM(x246)	t0__5a0		! t0__8t0_a0	! b_e_2t0	! t0__3t0
+LSYM(x247)	t0__5a0		! t0__8t0_a0	! b_e_2t0a0	! t0__3t0
+LSYM(x248)	t0__32a0	! t0__t0ma0	! b_e_shift	! r__r_8t0
+LSYM(x249)	t0__32a0	! t0__t0ma0	! b_e_t0	! t0__8t0_a0
+LSYM(x250)	t0__5a0		! t0__5t0	! b_e_2t0	! t0__5t0
+LSYM(x251)	t0__5a0		! t0__5t0	! b_e_2t0a0	! t0__5t0
+LSYM(x252)	t0__64a0	! t0__t0ma0	! b_e_shift	! r__r_4t0
+LSYM(x253)	t0__64a0	! t0__t0ma0	! b_e_t0	! t0__4t0_a0
+LSYM(x254)	t0__128a0	! t0__t0ma0	! b_e_shift	! r__r_2t0
+LSYM(x255)	t0__256a0	! a1_ne_0_b_l0	! t0__t0ma0	! b_n_ret_t0
+/*1040 insts before this.  */
+LSYM(ret_t0)	MILLIRET
+LSYM(e_t0)	r__r_t0
+LSYM(e_shift)	a1_ne_0_b_l2
+	a0__256a0	/* a0 <<= 8 *********** */
+	MILLIRETN
+LSYM(e_t0ma0)	a1_ne_0_b_l0
+	t0__t0ma0
+	MILLIRET
+	r__r_t0
+LSYM(e_t0a0)	a1_ne_0_b_l0
+	t0__t0_a0
+	MILLIRET
+	r__r_t0
+LSYM(e_t02a0)	a1_ne_0_b_l0
+	t0__t0_2a0
+	MILLIRET
+	r__r_t0
+LSYM(e_t04a0)	a1_ne_0_b_l0
+	t0__t0_4a0
+	MILLIRET
+	r__r_t0
+LSYM(e_2t0)	a1_ne_0_b_l1
+	r__r_2t0
+	MILLIRETN
+LSYM(e_2t0a0)	a1_ne_0_b_l0
+	t0__2t0_a0
+	MILLIRET
+	r__r_t0
+LSYM(e2t04a0)	t0__t0_2a0
+	a1_ne_0_b_l1
+	r__r_2t0
+	MILLIRETN
+LSYM(e_3t0)	a1_ne_0_b_l0
+	t0__3t0
+	MILLIRET
+	r__r_t0
+LSYM(e_4t0)	a1_ne_0_b_l1
+	r__r_4t0
+	MILLIRETN
+LSYM(e_4t0a0)	a1_ne_0_b_l0
+	t0__4t0_a0
+	MILLIRET
+	r__r_t0
+LSYM(e4t08a0)	t0__t0_2a0
+	a1_ne_0_b_l1
+	r__r_4t0
+	MILLIRETN
+LSYM(e_5t0)	a1_ne_0_b_l0
+	t0__5t0
+	MILLIRET
+	r__r_t0
+LSYM(e_8t0)	a1_ne_0_b_l1
+	r__r_8t0
+	MILLIRETN
+LSYM(e_8t0a0)	a1_ne_0_b_l0
+	t0__8t0_a0
+	MILLIRET
+	r__r_t0
+
+	.procend
+	.end
+#endif
diff --git a/arch/parisc/lib/milli/remI.S b/arch/parisc/lib/milli/remI.S
new file mode 100644
index 0000000..63bc094
--- /dev/null
+++ b/arch/parisc/lib/milli/remI.S
@@ -0,0 +1,185 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_remI
+/* ROUTINE:	$$remI
+
+   DESCRIPTION:
+   .	$$remI returns the remainder of the division of two signed 32-bit
+   .	integers.  The sign of the remainder is the same as the sign of
+   .	the dividend.
+
+
+   INPUT REGISTERS:
+   .	arg0 == dividend
+   .	arg1 == divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 = destroyed
+   .	arg1 = destroyed
+   .	ret1 = remainder
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   = undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:  DIVIDE BY ZERO
+   .	Changes memory at the following places:  NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable
+   .	Does not create a stack frame
+   .	Is usable for internal or external microcode
+
+   DISCUSSION:
+   .	Calls other millicode routines via mrp:  NONE
+   .	Calls other millicode routines:  NONE  */
+
+RDEFINE(tmp,r1)
+RDEFINE(retreg,ret1)
+
+	SUBSPA_MILLI
+	ATTR_MILLI
+	.proc
+	.callinfo millicode
+	.entry
+GSYM($$remI)
+GSYM($$remoI)
+	.export $$remI,MILLICODE
+	.export $$remoI,MILLICODE
+	ldo		-1(arg1),tmp		/*  is there at most one bit set ? */
+	and,<>		arg1,tmp,r0		/*  if not, don't use power of 2 */
+	addi,>		0,arg1,r0		/*  if denominator > 0, use power */
+						/*  of 2 */
+	b,n		LREF(neg_denom)
+LSYM(pow2)
+	comb,>,n	0,arg0,LREF(neg_num)	/*  is numerator < 0 ? */
+	and		arg0,tmp,retreg		/*  get the result */
+	MILLIRETN
+LSYM(neg_num)
+	subi		0,arg0,arg0		/*  negate numerator */
+	and		arg0,tmp,retreg		/*  get the result */
+	subi		0,retreg,retreg		/*  negate result */
+	MILLIRETN
+LSYM(neg_denom)
+	addi,<		0,arg1,r0		/*  if arg1 >= 0, it's not power */
+						/*  of 2 */
+	b,n		LREF(regular_seq)
+	sub		r0,arg1,tmp		/*  make denominator positive */
+	comb,=,n	arg1,tmp,LREF(regular_seq) /*  test against 0x80000000 and 0 */
+	ldo		-1(tmp),retreg		/*  is there at most one bit set ? */
+	and,=		tmp,retreg,r0		/*  if not, go to regular_seq */
+	b,n		LREF(regular_seq)
+	comb,>,n	0,arg0,LREF(neg_num_2)	/*  if arg0 < 0, negate it  */
+	and		arg0,retreg,retreg
+	MILLIRETN
+LSYM(neg_num_2)
+	subi		0,arg0,tmp		/*  test against 0x80000000 */
+	and		tmp,retreg,retreg
+	subi		0,retreg,retreg
+	MILLIRETN
+LSYM(regular_seq)
+	addit,=		0,arg1,0		/*  trap if div by zero */
+	add,>=		0,arg0,retreg		/*  move dividend, if retreg < 0, */
+	sub		0,retreg,retreg		/*    make it positive */
+	sub		0,arg1, tmp		/*  clear carry,  */
+						/*    negate the divisor */
+	ds		0, tmp,0		/*  set V-bit to the comple- */
+						/*    ment of the divisor sign */
+	or		0,0, tmp		/*  clear  tmp */
+	add		retreg,retreg,retreg	/*  shift msb bit into carry */
+	ds		 tmp,arg1, tmp		/*  1st divide step, if no carry */
+						/*    out, msb of quotient = 0 */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+LSYM(t1)
+	ds		 tmp,arg1, tmp		/*  2nd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  3rd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  4th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  5th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  6th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  7th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  8th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  9th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  10th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  11th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  12th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  13th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  14th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  15th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  16th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  17th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  18th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  19th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  20th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  21st divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  22nd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  23rd divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  24th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  25th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  26th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  27th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  28th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  29th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  30th divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  31st divide step */
+	addc		retreg,retreg,retreg	/*  shift retreg with/into carry */
+	ds		 tmp,arg1, tmp		/*  32nd divide step, */
+	addc		retreg,retreg,retreg	/*  shift last bit into retreg */
+	movb,>=,n	 tmp,retreg,LREF(finish) /*  branch if pos.  tmp */
+	add,<		arg1,0,0		/*  if arg1 > 0, add arg1 */
+	add,tr		 tmp,arg1,retreg	/*    for correcting remainder tmp */
+	sub		 tmp,arg1,retreg	/*  else add absolute value arg1 */
+LSYM(finish)
+	add,>=		arg0,0,0		/*  set sign of remainder */
+	sub		0,retreg,retreg		/*    to sign of dividend */
+	MILLIRET
+	nop
+	.exit
+	.procend
+#ifdef milliext
+	.origin 0x00000200
+#endif
+	.end
+#endif
diff --git a/arch/parisc/lib/milli/remU.S b/arch/parisc/lib/milli/remU.S
new file mode 100644
index 0000000..c0a2d6e
--- /dev/null
+++ b/arch/parisc/lib/milli/remU.S
@@ -0,0 +1,148 @@
+/* 32 and 64-bit millicode, original author Hewlett-Packard
+   adapted for gcc by Paul Bame <bame@debian.org>
+   and Alan Modra <alan@linuxcare.com.au>.
+
+   Copyright 2001, 2002, 2003 Free Software Foundation, Inc.
+
+   This file is part of GCC and is released under the terms of
+   of the GNU General Public License as published by the Free Software
+   Foundation; either version 2, or (at your option) any later version.
+   See the file COPYING in the top-level GCC source directory for a copy
+   of the license.  */
+
+#include "milli.h"
+
+#ifdef L_remU
+/* ROUTINE:	$$remU
+   .	Single precision divide for remainder with unsigned binary integers.
+   .
+   .	The remainder must be dividend-(dividend/divisor)*divisor.
+   .	Divide by zero is trapped.
+
+   INPUT REGISTERS:
+   .	arg0 ==	dividend
+   .	arg1 == divisor
+   .	mrp  == return pc
+   .	sr0  == return space when called externally
+
+   OUTPUT REGISTERS:
+   .	arg0 =	undefined
+   .	arg1 =	undefined
+   .	ret1 =	remainder
+
+   OTHER REGISTERS AFFECTED:
+   .	r1   =	undefined
+
+   SIDE EFFECTS:
+   .	Causes a trap under the following conditions:  DIVIDE BY ZERO
+   .	Changes memory at the following places:  NONE
+
+   PERMISSIBLE CONTEXT:
+   .	Unwindable.
+   .	Does not create a stack frame.
+   .	Suitable for internal or external millicode.
+   .	Assumes the special millicode register conventions.
+
+   DISCUSSION:
+   .	Calls other millicode routines using mrp: NONE
+   .	Calls other millicode routines: NONE  */
+
+
+RDEFINE(temp,r1)
+RDEFINE(rmndr,ret1)	/*  r29 */
+	SUBSPA_MILLI
+	ATTR_MILLI
+	.export $$remU,millicode
+	.proc
+	.callinfo	millicode
+	.entry
+GSYM($$remU)
+	ldo	-1(arg1),temp		/*  is there at most one bit set ? */
+	and,=	arg1,temp,r0		/*  if not, don't use power of 2 */
+	b	LREF(regular_seq)
+	addit,=	0,arg1,r0		/*  trap on div by zero */
+	and	arg0,temp,rmndr		/*  get the result for power of 2 */
+	MILLIRETN
+LSYM(regular_seq)
+	comib,>=,n  0,arg1,LREF(special_case)
+	subi	0,arg1,rmndr		/*  clear carry, negate the divisor */
+	ds	r0,rmndr,r0		/*  set V-bit to 1 */
+	add	arg0,arg0,temp		/*  shift msb bit into carry */
+	ds	r0,arg1,rmndr		/*  1st divide step, if no carry */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  2nd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  3rd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  4th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  5th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  6th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  7th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  8th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  9th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  10th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  11th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  12th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  13th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  14th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  15th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  16th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  17th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  18th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  19th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  20th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  21st divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  22nd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  23rd divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  24th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  25th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  26th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  27th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  28th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  29th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  30th divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  31st divide step */
+	addc	temp,temp,temp		/*  shift temp with/into carry */
+	ds	rmndr,arg1,rmndr		/*  32nd divide step, */
+	comiclr,<= 0,rmndr,r0
+	  add	rmndr,arg1,rmndr	/*  correction */
+	MILLIRETN
+	nop
+
+/* Putting >= on the last DS and deleting COMICLR does not work!  */
+LSYM(special_case)
+	sub,>>=	arg0,arg1,rmndr
+	  copy	arg0,rmndr
+	MILLIRETN
+	nop
+	.exit
+	.procend
+	.end
+#endif
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index e724b36..aa875fa 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -607,7 +607,7 @@
 
 				printk("Zone list for zone %d on node %d: ", j, i);
 				for (k = 0; zl->zones[k] != NULL; k++) 
-					printk("[%ld/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
+					printk("[%d/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
 				printk("\n");
 			}
 		}
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 5b86ee5..5eace9e 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -557,44 +557,6 @@
 #ifdef CONFIG_64BIT
 
 /*
-** Determine if a device is already configured.
-** If so, reserve it resources.
-**
-** Read PCI cfg command register and see if I/O or MMIO is enabled.
-** PAT has to enable the devices it's using.
-**
-** Note: resources are fixed up before we try to claim them.
-*/
-static void
-lba_claim_dev_resources(struct pci_dev *dev)
-{
-	u16 cmd;
-	int i, srch_flags;
-
-	(void) pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	srch_flags  = (cmd & PCI_COMMAND_IO) ? IORESOURCE_IO : 0;
-	if (cmd & PCI_COMMAND_MEMORY)
-		srch_flags |= IORESOURCE_MEM;
-
-	if (!srch_flags)
-		return;
-
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		if (dev->resource[i].flags & srch_flags) {
-			pci_claim_resource(dev, i);
-			DBG("   claimed %s %d [%lx,%lx]/%lx\n",
-				pci_name(dev), i,
-				dev->resource[i].start,
-				dev->resource[i].end,
-				dev->resource[i].flags
-				);
-		}
-	}
-}
-
-
-/*
  * truncate_pat_collision:  Deal with overlaps or outright collisions
  *			between PAT PDC reported ranges.
  *
@@ -653,7 +615,6 @@
 }
 
 #else
-#define lba_claim_dev_resources(dev) do { } while (0)
 #define truncate_pat_collision(r,n)  (0)
 #endif
 
@@ -684,8 +645,12 @@
 	** pci_alloc_primary_bus() mangles this.
 	*/
 	if (bus->self) {
+		int i;
 		/* PCI-PCI Bridge */
 		pci_read_bridge_bases(bus);
+		for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
+			pci_claim_resource(bus->self, i);
+		}
 	} else {
 		/* Host-PCI Bridge */
 		int err, i;
@@ -803,6 +768,9 @@
 				DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX",
 					res->flags, res->start, res->end);
 			}
+			if ((i != PCI_ROM_RESOURCE) ||
+			    (res->flags & IORESOURCE_ROM_ENABLE))
+				pci_claim_resource(dev, i);
 		}
 
 #ifdef FBB_SUPPORT
@@ -814,11 +782,6 @@
 		bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK);
 #endif
 
-		if (is_pdc_pat()) {
-			/* Claim resources for PDC's devices */
-			lba_claim_dev_resources(dev);
-		}
-
                 /*
 		** P2PB's have no IRQs. ignore them.
 		*/
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index fc4bde2..ebb09e9 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -282,6 +282,7 @@
 	unsigned short i;
 	char in[count+1], *temp;
 	struct device *dev;
+	int ret;
 
 	if (!entry || !buf || !count)
 		return -EINVAL;
@@ -333,7 +334,9 @@
 	
 	/* Update the symlink to the real device */
 	sysfs_remove_link(&entry->kobj, "device");
-	sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+	ret = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+	WARN_ON(ret);
+
 	write_unlock(&entry->rw_lock);
 	
 	printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
@@ -1003,8 +1006,10 @@
 		entry->ready = 2;
 		
 		/* Add a nice symlink to the real device */
-		if (entry->dev)
-			sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+		if (entry->dev) {
+			err = sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+			WARN_ON(err);
+		}
 
 		write_unlock(&entry->rw_lock);
 	}
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index d044c48..e5c3239 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1909,8 +1909,8 @@
 			global_ioc_cnt *= 2;
 	}
 
-	printk(KERN_INFO "%s found %s at 0x%lx\n",
-		MODULE_NAME, version, dev->hpa.start);
+	printk(KERN_INFO "%s found %s at 0x%llx\n",
+		MODULE_NAME, version, (unsigned long long)dev->hpa.start);
 
 	sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
 	if (!sba_dev) {
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 38cdf9f..1e8d2d1 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -155,6 +155,7 @@
 	struct superio_device *sio = &sio_dev;
 	struct pci_dev *pdev = sio->lio_pdev;
 	u16 word;
+	int ret;
 
 	if (sio->suckyio_irq_enabled)
 		return;
@@ -200,7 +201,8 @@
 	pci_write_config_word (pdev, PCI_COMMAND, word);
 
 	pci_set_master (pdev);
-	pci_enable_device(pdev);
+	ret = pci_enable_device(pdev);
+	BUG_ON(ret < 0);	/* not too much we can do about this... */
 
 	/*
 	 * Next project is programming the onboard interrupt controllers.
diff --git a/include/asm-parisc/Kbuild b/include/asm-parisc/Kbuild
index c68e168..f88b252 100644
--- a/include/asm-parisc/Kbuild
+++ b/include/asm-parisc/Kbuild
@@ -1 +1,3 @@
 include include/asm-generic/Kbuild.asm
+
+unifdef-y += pdc.h
diff --git a/include/asm-parisc/io.h b/include/asm-parisc/io.h
index 95f00e1..55ddb18 100644
--- a/include/asm-parisc/io.h
+++ b/include/asm-parisc/io.h
@@ -138,7 +138,7 @@
 /* Most machines react poorly to I/O-space being cacheable... Instead let's
  * define ioremap() in terms of ioremap_nocache().
  */
-extern inline void __iomem * ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
 {
 	return __ioremap(offset, size, _PAGE_NO_CACHE);
 }
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
index f6bba4c..b59a1504 100644
--- a/include/asm-parisc/page.h
+++ b/include/asm-parisc/page.h
@@ -3,6 +3,8 @@
 
 #ifdef __KERNEL__
 
+#include <linux/const.h>
+
 #if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
 # define PAGE_SHIFT	12
 #elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
@@ -12,7 +14,7 @@
 #else
 # error "unknown default kernel page size"
 #endif
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index 61fbd57..4ba868f 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -207,7 +207,7 @@
 extern void pcibios_register_hba(struct pci_hba_data *);
 extern void pcibios_set_master(struct pci_dev *);
 #else
-extern inline void pcibios_register_hba(struct pci_hba_data *x)
+static inline void pcibios_register_hba(struct pci_hba_data *x)
 {
 }
 #endif
diff --git a/include/asm-parisc/pdc.h b/include/asm-parisc/pdc.h
index 876fd81..5e0c3ca 100644
--- a/include/asm-parisc/pdc.h
+++ b/include/asm-parisc/pdc.h
@@ -1,7 +1,6 @@
 #ifndef _PARISC_PDC_H
 #define _PARISC_PDC_H
 
-
 /*
  *	PDC return values ...
  *	All PDC calls return a subset of these errors. 
@@ -20,7 +19,6 @@
 #define PDC_BUS_POW_WARN	-12	/* Call could not complete in allowed power budget */
 #define PDC_NOT_NARROW		-17	/* Narrow mode not supported	*/
 
-
 /*
  *	PDC entry points...
  */
@@ -50,6 +48,12 @@
 #define PDC_MODEL_DISPEC	5	/* disable specific option	*/
 #define PDC_MODEL_CPU_ID	6	/* returns cpu-id (only newer machines!) */
 #define PDC_MODEL_CAPABILITIES	7	/* returns OS32/OS64-flags	*/
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
+#define  PDC_MODEL_IOPDIR_FDC		(1 << 2)
+#define  PDC_MODEL_NVA_MASK		(3 << 4)
+#define  PDC_MODEL_NVA_SUPPORTED	(0 << 4)
+#define  PDC_MODEL_NVA_SLOW		(1 << 4)
+#define  PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
 #define PDC_MODEL_GET_BOOT__OP	8	/* returns boot test options	*/
 #define PDC_MODEL_SET_BOOT__OP	9	/* set boot test options	*/
 
@@ -91,7 +95,7 @@
 #define PDC_TOD		9		/* time-of-day clock (TOD)	*/
 #define PDC_TOD_READ		0	/* read TOD			*/
 #define PDC_TOD_WRITE		1	/* write TOD			*/
-#define PDC_TOD_ITIMER		2	/* calibrate Interval Timer (CR16) */
+
 
 #define PDC_STABLE	10		/* stable storage (sprockets)	*/
 #define PDC_STABLE_READ		0
@@ -143,15 +147,6 @@
 #define PDC_MEM_RET_PDT_FULL		-11
 #define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
 
-#ifndef __ASSEMBLY__
-typedef struct {
-    unsigned long long	baseAddr;
-    unsigned int	pages;
-    unsigned int	reserved;
-} MemAddrTable_t;
-#endif
-
-
 #define PDC_PSW		21		/* Get/Set default System Mask  */
 #define PDC_PSW_MASK		0	/* Return mask                  */
 #define PDC_PSW_GET_DEFAULTS	1	/* Return defaults              */
@@ -274,6 +269,43 @@
 #define PDC_LINK_PCI_ENTRY_POINTS	0  /* list (Arg1) = 0 */
 #define PDC_LINK_USB_ENTRY_POINTS	1  /* list (Arg1) = 1 */
 
+/* cl_class
+ * page 3-33 of IO-Firmware ARS
+ * IODC ENTRY_INIT(Search first) RET[1]
+ */
+#define	CL_NULL		0	/* invalid */
+#define	CL_RANDOM	1	/* random access (as disk) */
+#define	CL_SEQU		2	/* sequential access (as tape) */
+#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
+#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
+#define	CL_DISPL	9	/* half-duplex console (display) */
+#define	CL_FC		10	/* FiberChannel access media */
+
+/* IODC ENTRY_INIT() */
+#define ENTRY_INIT_SRCH_FRST	2
+#define ENTRY_INIT_SRCH_NEXT	3
+#define ENTRY_INIT_MOD_DEV	4
+#define ENTRY_INIT_DEV		5
+#define ENTRY_INIT_MOD		6
+#define ENTRY_INIT_MSG		9
+
+/* IODC ENTRY_IO() */
+#define ENTRY_IO_BOOTIN		0
+#define ENTRY_IO_BOOTOUT	1
+#define ENTRY_IO_CIN		2
+#define ENTRY_IO_COUT		3
+#define ENTRY_IO_CLOSE		4
+#define ENTRY_IO_GETMSG		9
+#define ENTRY_IO_BBLOCK_IN	16
+#define ENTRY_IO_BBLOCK_OUT	17
+
+/* IODC ENTRY_SPA() */
+
+/* IODC ENTRY_CONFIG() */
+
+/* IODC ENTRY_TEST() */
+
+/* IODC ENTRY_TLB() */
 
 /* constants for OS (NVM...) */
 #define OS_ID_NONE		0	/* Undefined OS ID	*/
@@ -295,7 +327,13 @@
 #define OSTAT_RUN		6
 #define OSTAT_ON		7
 
-#ifndef __ASSEMBLY__
+/* Page Zero constant offsets used by the HPMC handler */
+#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
+#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
+#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
+
+#if !defined(__ASSEMBLY__)
+#ifdef __KERNEL__
 
 #include <linux/types.h>
 
@@ -331,14 +369,6 @@
 	unsigned long curr_key;
 };
 
-/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
-
-#define PDC_MODEL_IOPDIR_FDC            (1 << 2)        /* see sba_iommu.c */
-#define PDC_MODEL_NVA_MASK		(3 << 4)
-#define PDC_MODEL_NVA_SUPPORTED		(0 << 4)
-#define PDC_MODEL_NVA_SLOW		(1 << 4)
-#define PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
-
 struct pdc_cache_cf {		/* for PDC_CACHE  (I/D-caches) */
     unsigned long
 #ifdef CONFIG_64BIT
@@ -558,156 +588,6 @@
 	__u64 fr[32];
 };
 
-#endif /* __ASSEMBLY__ */
-
-/* flags of the device_path (see below) */
-#define	PF_AUTOBOOT	0x80
-#define	PF_AUTOSEARCH	0x40
-#define	PF_TIMER	0x0F
-
-#ifndef __ASSEMBLY__
-
-struct device_path {		/* page 1-69 */
-	unsigned char flags;	/* flags see above! */
-	unsigned char bc[6];	/* bus converter routing info */
-	unsigned char mod;
-	unsigned int  layers[6];/* device-specific layer-info */
-} __attribute__((aligned(8))) ;
-
-struct pz_device {
-	struct	device_path dp;	/* see above */
-	/* struct	iomod *hpa; */
-	unsigned int hpa;	/* HPA base address */
-	/* char	*spa; */
-	unsigned int spa;	/* SPA base address */
-	/* int	(*iodc_io)(struct iomod*, ...); */
-	unsigned int iodc_io;	/* device entry point */
-	short	pad;		/* reserved */
-	unsigned short cl_class;/* see below */
-} __attribute__((aligned(8))) ;
-
-#endif /* __ASSEMBLY__ */
-
-/* cl_class
- * page 3-33 of IO-Firmware ARS
- * IODC ENTRY_INIT(Search first) RET[1]
- */
-#define	CL_NULL		0	/* invalid */
-#define	CL_RANDOM	1	/* random access (as disk) */
-#define	CL_SEQU		2	/* sequential access (as tape) */
-#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
-#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
-#define	CL_DISPL	9	/* half-duplex console (display) */
-#define	CL_FC		10	/* FiberChannel access media */
-
-#if 0
-/* FIXME: DEVCLASS_* duplicates CL_* (above).  Delete DEVCLASS_*? */
-#define DEVCLASS_RANDOM		1
-#define DEVCLASS_SEQU		2
-#define DEVCLASS_DUPLEX		7
-#define DEVCLASS_KEYBD		8
-#define DEVCLASS_DISP		9
-#endif
-
-/* IODC ENTRY_INIT() */
-#define ENTRY_INIT_SRCH_FRST	2
-#define ENTRY_INIT_SRCH_NEXT	3
-#define ENTRY_INIT_MOD_DEV	4
-#define ENTRY_INIT_DEV		5
-#define ENTRY_INIT_MOD		6
-#define ENTRY_INIT_MSG		9
-
-/* IODC ENTRY_IO() */
-#define ENTRY_IO_BOOTIN		0
-#define ENTRY_IO_BOOTOUT	1
-#define ENTRY_IO_CIN		2
-#define ENTRY_IO_COUT		3
-#define ENTRY_IO_CLOSE		4
-#define ENTRY_IO_GETMSG		9
-#define ENTRY_IO_BBLOCK_IN	16
-#define ENTRY_IO_BBLOCK_OUT	17
-
-/* IODC ENTRY_SPA() */
-
-/* IODC ENTRY_CONFIG() */
-
-/* IODC ENTRY_TEST() */
-
-/* IODC ENTRY_TLB() */
-
-
-/* DEFINITION OF THE ZERO-PAGE (PAG0) */
-/* based on work by Jason Eckhardt (jason@equator.com) */
-
-#ifndef __ASSEMBLY__
-
-#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
-
-struct zeropage {
-	/* [0x000] initialize vectors (VEC) */
-	unsigned int	vec_special;		/* must be zero */
-	/* int	(*vec_pow_fail)(void);*/
-	unsigned int	vec_pow_fail; /* power failure handler */
-	/* int	(*vec_toc)(void); */
-	unsigned int	vec_toc;
-	unsigned int	vec_toclen;
-	/* int	(*vec_rendz)(void); */
-	unsigned int vec_rendz;
-	int	vec_pow_fail_flen;
-	int	vec_pad[10];		
-	
-	/* [0x040] reserved processor dependent */
-	int	pad0[112];
-
-	/* [0x200] reserved */
-	int	pad1[84];
-
-	/* [0x350] memory configuration (MC) */
-	int	memc_cont;		/* contiguous mem size (bytes) */
-	int	memc_phsize;		/* physical memory size */
-	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
-	unsigned int mem_pdc_hi;	/* used for 64-bit */
-
-	/* [0x360] various parameters for the boot-CPU */
-	/* unsigned int *mem_booterr[8]; */
-	unsigned int mem_booterr[8];	/* ptr to boot errors */
-	unsigned int mem_free;		/* first location, where OS can be loaded */
-	/* struct iomod *mem_hpa; */
-	unsigned int mem_hpa;		/* HPA of the boot-CPU */
-	/* int (*mem_pdc)(int, ...); */
-	unsigned int mem_pdc;		/* PDC entry point */
-	unsigned int mem_10msec;	/* number of clock ticks in 10msec */
-
-	/* [0x390] initial memory module (IMM) */
-	/* struct iomod *imm_hpa; */
-	unsigned int imm_hpa;		/* HPA of the IMM */
-	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
-	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
-	unsigned int	imm_max_mem;		/* bytes of mem in IMM */
-
-	/* [0x3A0] boot console, display device and keyboard */
-	struct pz_device mem_cons;	/* description of console device */
-	struct pz_device mem_boot;	/* description of boot device */
-	struct pz_device mem_kbd;	/* description of keyboard device */
-
-	/* [0x430] reserved */
-	int	pad430[116];
-
-	/* [0x600] processor dependent */
-	__u32	pad600[1];
-	__u32	proc_sti;		/* pointer to STI ROM */
-	__u32	pad608[126];
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* Page Zero constant offsets used by the HPMC handler */
-
-#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
-#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
-#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
-
-#ifndef __ASSEMBLY__
 void pdc_console_init(void);	/* in pdc_console.c */
 void pdc_console_restart(void);
 
@@ -724,7 +604,7 @@
 		  void *iodc_data, unsigned int iodc_data_size);
 int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
 			     struct pdc_module_path *mod_path, long mod_index);
-int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, 
+int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
 			      long mod_index, long addr_index);
 int pdc_model_info(struct pdc_model *model);
 int pdc_model_sysmodel(char *name);
@@ -786,6 +666,94 @@
 	default:	return "Unknown";
 	}
 }
-#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
+
+/* flags of the device_path */
+#define	PF_AUTOBOOT	0x80
+#define	PF_AUTOSEARCH	0x40
+#define	PF_TIMER	0x0F
+
+struct device_path {		/* page 1-69 */
+	unsigned char flags;	/* flags see above! */
+	unsigned char bc[6];	/* bus converter routing info */
+	unsigned char mod;
+	unsigned int  layers[6];/* device-specific layer-info */
+} __attribute__((aligned(8))) ;
+
+struct pz_device {
+	struct	device_path dp;	/* see above */
+	/* struct	iomod *hpa; */
+	unsigned int hpa;	/* HPA base address */
+	/* char	*spa; */
+	unsigned int spa;	/* SPA base address */
+	/* int	(*iodc_io)(struct iomod*, ...); */
+	unsigned int iodc_io;	/* device entry point */
+	short	pad;		/* reserved */
+	unsigned short cl_class;/* see below */
+} __attribute__((aligned(8))) ;
+
+struct zeropage {
+	/* [0x000] initialize vectors (VEC) */
+	unsigned int	vec_special;		/* must be zero */
+	/* int	(*vec_pow_fail)(void);*/
+	unsigned int	vec_pow_fail; /* power failure handler */
+	/* int	(*vec_toc)(void); */
+	unsigned int	vec_toc;
+	unsigned int	vec_toclen;
+	/* int	(*vec_rendz)(void); */
+	unsigned int vec_rendz;
+	int	vec_pow_fail_flen;
+	int	vec_pad[10];		
+	
+	/* [0x040] reserved processor dependent */
+	int	pad0[112];
+
+	/* [0x200] reserved */
+	int	pad1[84];
+
+	/* [0x350] memory configuration (MC) */
+	int	memc_cont;		/* contiguous mem size (bytes) */
+	int	memc_phsize;		/* physical memory size */
+	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
+	unsigned int mem_pdc_hi;	/* used for 64-bit */
+
+	/* [0x360] various parameters for the boot-CPU */
+	/* unsigned int *mem_booterr[8]; */
+	unsigned int mem_booterr[8];	/* ptr to boot errors */
+	unsigned int mem_free;		/* first location, where OS can be loaded */
+	/* struct iomod *mem_hpa; */
+	unsigned int mem_hpa;		/* HPA of the boot-CPU */
+	/* int (*mem_pdc)(int, ...); */
+	unsigned int mem_pdc;		/* PDC entry point */
+	unsigned int mem_10msec;	/* number of clock ticks in 10msec */
+
+	/* [0x390] initial memory module (IMM) */
+	/* struct iomod *imm_hpa; */
+	unsigned int imm_hpa;		/* HPA of the IMM */
+	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
+	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
+	unsigned int	imm_max_mem;		/* bytes of mem in IMM */
+
+	/* [0x3A0] boot console, display device and keyboard */
+	struct pz_device mem_cons;	/* description of console device */
+	struct pz_device mem_boot;	/* description of boot device */
+	struct pz_device mem_kbd;	/* description of keyboard device */
+
+	/* [0x430] reserved */
+	int	pad430[116];
+
+	/* [0x600] processor dependent */
+	__u32	pad600[1];
+	__u32	proc_sti;		/* pointer to STI ROM */
+	__u32	pad608[126];
+};
+
+#endif /* !defined(__ASSEMBLY__) */
 
 #endif /* _PARISC_PDC_H */
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
index 9ab79c8..cd0fa4f 100644
--- a/include/asm-parisc/pgtable.h
+++ b/include/asm-parisc/pgtable.h
@@ -49,14 +49,6 @@
 #define pgd_ERROR(e) \
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
 
- /* Note: If you change ISTACK_SIZE, you need to change the corresponding
-  * values in vmlinux.lds and vmlinux64.lds (init_istack section). Also,
-  * the "order" and size need to agree.
-  */
-
-#define  ISTACK_SIZE  32768 /* Interrupt Stack Size */
-#define  ISTACK_ORDER 3
-
 /* This is the size of the initially mapped kernel memory */
 #ifdef CONFIG_64BIT
 #define KERNEL_INITIAL_ORDER	24	/* 0 to 1<<24 = 16MB */
@@ -325,27 +317,27 @@
  * setup: the pgd is never bad, and a pmd always exists (as it's folded
  * into the pgd entry)
  */
-extern inline int pgd_none(pgd_t pgd)		{ return 0; }
-extern inline int pgd_bad(pgd_t pgd)		{ return 0; }
-extern inline int pgd_present(pgd_t pgd)	{ return 1; }
-extern inline void pgd_clear(pgd_t * pgdp)	{ }
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t * pgdp)	{ }
 #endif
 
 /*
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
-extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
-extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-extern inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
-extern inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
 
-extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
-extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; return pte; }
-extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
-extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
@@ -369,7 +361,7 @@
 	return pte;
 }
 
-extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 { pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
 
 /* Permanent address of a page.  On parisc we don't have highmem. */
diff --git a/include/asm-parisc/prefetch.h b/include/asm-parisc/prefetch.h
index 5d02172..c5edc60 100644
--- a/include/asm-parisc/prefetch.h
+++ b/include/asm-parisc/prefetch.h
@@ -19,7 +19,7 @@
 #ifdef CONFIG_PREFETCH
 
 #define ARCH_HAS_PREFETCH
-extern inline void prefetch(const void *addr)
+static inline void prefetch(const void *addr)
 {
 	__asm__("ldw 0(%0), %%r0" : : "r" (addr));
 }
@@ -27,7 +27,7 @@
 /* LDD is a PA2.0 addition. */
 #ifdef CONFIG_PA20
 #define ARCH_HAS_PREFETCHW
-extern inline void prefetchw(const void *addr)
+static inline void prefetchw(const void *addr)
 {
 	__asm__("ldd 0(%0), %%r0" : : "r" (addr));
 }
diff --git a/include/asm-parisc/rtc.h b/include/asm-parisc/rtc.h
index f4ebff1..099d641 100644
--- a/include/asm-parisc/rtc.h
+++ b/include/asm-parisc/rtc.h
@@ -50,10 +50,10 @@
 	long int days, rem, y;
 	const unsigned short int *ip;
 
-	if(pdc_tod_read(&tod_data) < 0)
+	memset(wtime, 0, sizeof(*wtime));
+	if (pdc_tod_read(&tod_data) < 0)
 		return RTC_24H | RTC_BATT_BAD;
 
-
 	// most of the remainder of this function is:
 //	Copyright (C) 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
 //	This was originally a part of the GNU C Library.
diff --git a/include/asm-parisc/semaphore.h b/include/asm-parisc/semaphore.h
index b771dcf..a16271c 100644
--- a/include/asm-parisc/semaphore.h
+++ b/include/asm-parisc/semaphore.h
@@ -54,7 +54,7 @@
 
 #define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
 
-extern inline void sema_init (struct semaphore *sem, int val)
+static inline void sema_init (struct semaphore *sem, int val)
 {
 	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
 }
@@ -82,7 +82,7 @@
  * interrupts while we're messing with the semaphore.  Sorry.
  */
 
-extern __inline__ void down(struct semaphore * sem)
+static inline void down(struct semaphore * sem)
 {
 	might_sleep();
 	spin_lock_irq(&sem->sentry);
@@ -94,7 +94,7 @@
 	spin_unlock_irq(&sem->sentry);
 }
 
-extern __inline__ int down_interruptible(struct semaphore * sem)
+static inline int down_interruptible(struct semaphore * sem)
 {
 	int ret = 0;
 	might_sleep();
@@ -112,7 +112,7 @@
  * down_trylock returns 0 on success, 1 if we failed to get the lock.
  * May not sleep, but must preserve irq state
  */
-extern __inline__ int down_trylock(struct semaphore * sem)
+static inline int down_trylock(struct semaphore * sem)
 {
 	unsigned long flags;
 	int count;
@@ -129,7 +129,7 @@
  * Note! This is subtle. We jump to wake people up only if
  * the semaphore was negative (== somebody was waiting on it).
  */
-extern __inline__ void up(struct semaphore * sem)
+static inline void up(struct semaphore * sem)
 {
 	unsigned long flags;
 
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
index f74099b..081b4ae 100644
--- a/include/asm-parisc/unistd.h
+++ b/include/asm-parisc/unistd.h
@@ -797,8 +797,9 @@
 #define __NR_signalfd		(__NR_Linux + 302)
 #define __NR_timerfd		(__NR_Linux + 303)
 #define __NR_eventfd		(__NR_Linux + 304)
+#define __NR_fallocate		(__NR_Linux + 305)
 
-#define __NR_Linux_syscalls	(__NR_eventfd + 1)
+#define __NR_Linux_syscalls	(__NR_fallocate + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
index 28e480c..d716b76 100755
--- a/scripts/checkstack.pl
+++ b/scripts/checkstack.pl
@@ -13,6 +13,7 @@
 #	Random bits by Matt Mackall <mpm@selenic.com>
 #	M68k port by Geert Uytterhoeven and Andreas Schwab
 #	AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
+#	PARISC port by Kyle McMartin <kyle@parisc-linux.org>
 #
 #	Usage:
 #	objdump -d vmlinux | scripts/checkstack.pl [arch]
@@ -61,6 +62,8 @@
 	} elsif ($arch eq 'mips') {
 		#88003254:       27bdffe0        addiu   sp,sp,-32
 		$re = qr/.*addiu.*sp,sp,-(([0-9]{2}|[3-9])[0-9]{2})/o;
+	} elsif ($arch eq 'parisc' || $arch eq 'parisc64') {
+		$re = qr/.*ldo ($x{1,8})\(sp\),sp/o;
 	} elsif ($arch eq 'ppc') {
 		#c00029f4:       94 21 ff 30     stwu    r1,-208(r1)
 		$re = qr/.*stwu.*r1,-($x{1,8})\(r1\)/o;