ACPI: PCI: add a helper to convert _PRT INTx pin number to name
This adds a helper function to convert INTx pin numbers from the _PRT
(0, 1, 2, 3) to the pin name ('A', 'B', 'C', 'D').
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index ea003ba..5ce1fcf 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -60,6 +60,11 @@
static struct acpi_prt_list acpi_prt;
static DEFINE_SPINLOCK(acpi_prt_lock);
+static inline char pin_name(int pin)
+{
+ return 'A' + pin;
+}
+
/* --------------------------------------------------------------------------
PCI IRQ Routing Table (PRT) Support
-------------------------------------------------------------------------- */
@@ -174,14 +179,14 @@
entry->id.segment == quirk->segment &&
entry->id.bus == quirk->bus &&
entry->id.device == quirk->device &&
- entry->pin + 'A' == quirk->pin &&
+ pin_name(entry->pin) == quirk->pin &&
!strcmp(prt->source, quirk->source) &&
strlen(prt->source) >= strlen(quirk->actual_source)) {
printk(KERN_WARNING PREFIX "firmware reports "
"%04x:%02x:%02x PCI INT %c connected to %s; "
"changing to %s\n",
entry->id.segment, entry->id.bus,
- entry->id.device, 'A' + entry->pin,
+ entry->id.device, pin_name(entry->pin),
prt->source, quirk->actual_source);
strcpy(prt->source, quirk->actual_source);
}
@@ -235,8 +240,8 @@
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO,
" %04x:%02x:%02x[%c] -> %s[%d]\n",
entry->id.segment, entry->id.bus,
- entry->id.device, ('A' + entry->pin), prt->source,
- entry->link.index));
+ entry->id.device, pin_name(entry->pin),
+ prt->source, entry->link.index));
spin_lock(&acpi_prt_lock);
list_add_tail(&entry->node, &acpi_prt.entries);
@@ -387,7 +392,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Searching for _PRT entry for %04x:%02x:%02x[%c]\n",
- segment, bus_nr, device, ('A' + pin)));
+ segment, bus_nr, device, pin_name(pin)));
entry = acpi_pci_irq_find_prt_entry(segment, bus_nr, device, pin);
if (!entry) {
@@ -444,7 +449,7 @@
if (irq < 0) {
dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n",
- 'A' + orig_pin);
+ pin_name(orig_pin));
return -1;
}
@@ -511,7 +516,7 @@
* driver reported one, then use it. Exit in any case.
*/
if (gsi < 0) {
- dev_warn(&dev->dev, "PCI INT %c: no GSI", 'A' + pin);
+ dev_warn(&dev->dev, "PCI INT %c: no GSI", pin_name(pin));
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
@@ -527,7 +532,7 @@
rc = acpi_register_gsi(gsi, triggering, polarity);
if (rc < 0) {
dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
- 'A' + pin);
+ pin_name(pin));
return rc;
}
dev->irq = rc;
@@ -538,7 +543,7 @@
link_desc[0] = '\0';
dev_info(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n",
- 'A' + pin, link_desc, gsi,
+ pin_name(pin), link_desc, gsi,
(triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
(polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
@@ -585,6 +590,6 @@
* (e.g. PCI_UNDEFINED_IRQ).
*/
- dev_info(&dev->dev, "PCI INT %c disabled\n", 'A' + pin);
+ dev_info(&dev->dev, "PCI INT %c disabled\n", pin_name(pin));
acpi_unregister_gsi(gsi);
}