libata: pata_platform: make probe and remove functions device type neutral
Split pata_platform_{probe,remove} into two pieces:
1. pata_platform_{probe,remove} -- platform_device-dependant bits;
2. __ptata_platform_{probe,remove} -- device type neutral bits.
This is done to not duplicate code for the OF-platform driver.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index ac03a90..224bb6c 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -93,14 +93,9 @@
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
- struct pata_platform_info *info)
+ unsigned int shift)
{
- unsigned int shift = 0;
-
/* Fixup the port shift for platforms that need it */
- if (info && info->ioport_shift)
- shift = info->ioport_shift;
-
ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift);
ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift);
ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
@@ -114,8 +109,13 @@
}
/**
- * pata_platform_probe - attach a platform interface
- * @pdev: platform device
+ * __pata_platform_probe - attach a platform interface
+ * @dev: device
+ * @io_res: Resource representing I/O base
+ * @ctl_res: Resource representing CTL base
+ * @irq_res: Resource representing IRQ and its flags
+ * @ioport_shift: I/O port shift
+ * @__pio_mask: PIO mask
*
* Register a platform bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
@@ -135,14 +135,109 @@
*
* If no IRQ resource is present, PIO polling mode is used instead.
*/
-static int __devinit pata_platform_probe(struct platform_device *pdev)
+int __devinit __pata_platform_probe(struct device *dev,
+ struct resource *io_res,
+ struct resource *ctl_res,
+ struct resource *irq_res,
+ unsigned int ioport_shift,
+ int __pio_mask)
{
- struct resource *io_res, *ctl_res;
struct ata_host *host;
struct ata_port *ap;
- struct pata_platform_info *pp_info;
unsigned int mmio;
- int irq;
+ int irq = 0;
+ int irq_flags = 0;
+
+ /*
+ * Check for MMIO
+ */
+ mmio = (( io_res->flags == IORESOURCE_MEM) &&
+ (ctl_res->flags == IORESOURCE_MEM));
+
+ /*
+ * And the IRQ
+ */
+ if (irq_res && irq_res->start > 0) {
+ irq = irq_res->start;
+ irq_flags = irq_res->flags;
+ }
+
+ /*
+ * Now that that's out of the way, wire up the port..
+ */
+ host = ata_host_alloc(dev, 1);
+ if (!host)
+ return -ENOMEM;
+ ap = host->ports[0];
+
+ ap->ops = &pata_platform_port_ops;
+ ap->pio_mask = __pio_mask;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+ /*
+ * Use polling mode if there's no IRQ
+ */
+ if (!irq) {
+ ap->flags |= ATA_FLAG_PIO_POLLING;
+ ata_port_desc(ap, "no IRQ, using PIO polling");
+ }
+
+ /*
+ * Handle the MMIO case
+ */
+ if (mmio) {
+ ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
+ io_res->end - io_res->start + 1);
+ ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
+ ctl_res->end - ctl_res->start + 1);
+ } else {
+ ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
+ io_res->end - io_res->start + 1);
+ ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
+ ctl_res->end - ctl_res->start + 1);
+ }
+ if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
+ dev_err(dev, "failed to map IO/CTL base\n");
+ return -ENOMEM;
+ }
+
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+ pata_platform_setup_port(&ap->ioaddr, ioport_shift);
+
+ ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
+ (unsigned long long)io_res->start,
+ (unsigned long long)ctl_res->start);
+
+ /* activate */
+ return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
+ irq_flags, &pata_platform_sht);
+}
+EXPORT_SYMBOL_GPL(__pata_platform_probe);
+
+/**
+ * __pata_platform_remove - unplug a platform interface
+ * @dev: device
+ *
+ * A platform bus ATA device has been unplugged. Perform the needed
+ * cleanup. Also called on module unload for any active devices.
+ */
+int __devexit __pata_platform_remove(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__pata_platform_remove);
+
+static int __devinit pata_platform_probe(struct platform_device *pdev)
+{
+ struct resource *io_res;
+ struct resource *ctl_res;
+ struct resource *irq_res;
+ struct pata_platform_info *pp_info = pdev->dev.platform_data;
/*
* Simple resource validation ..
@@ -173,87 +268,20 @@
}
/*
- * Check for MMIO
- */
- mmio = (( io_res->flags == IORESOURCE_MEM) &&
- (ctl_res->flags == IORESOURCE_MEM));
-
- /*
* And the IRQ
*/
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- irq = 0; /* no irq */
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res)
+ irq_res->flags = pp_info ? pp_info->irq_flags : 0;
- /*
- * Now that that's out of the way, wire up the port..
- */
- host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- return -ENOMEM;
- ap = host->ports[0];
-
- ap->ops = &pata_platform_port_ops;
- ap->pio_mask = pio_mask;
- ap->flags |= ATA_FLAG_SLAVE_POSS;
-
- /*
- * Use polling mode if there's no IRQ
- */
- if (!irq) {
- ap->flags |= ATA_FLAG_PIO_POLLING;
- ata_port_desc(ap, "no IRQ, using PIO polling");
- }
-
- /*
- * Handle the MMIO case
- */
- if (mmio) {
- ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
- io_res->end - io_res->start + 1);
- ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
- ctl_res->end - ctl_res->start + 1);
- } else {
- ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
- io_res->end - io_res->start + 1);
- ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
- ctl_res->end - ctl_res->start + 1);
- }
- if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
- dev_err(&pdev->dev, "failed to map IO/CTL base\n");
- return -ENOMEM;
- }
-
- ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-
- pp_info = pdev->dev.platform_data;
- pata_platform_setup_port(&ap->ioaddr, pp_info);
-
- ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
- (unsigned long long)io_res->start,
- (unsigned long long)ctl_res->start);
-
- /* activate */
- return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
- pp_info ? pp_info->irq_flags : 0,
- &pata_platform_sht);
+ return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
+ pp_info ? pp_info->ioport_shift : 0,
+ pio_mask);
}
-/**
- * pata_platform_remove - unplug a platform interface
- * @pdev: platform device
- *
- * A platform bus ATA device has been unplugged. Perform the needed
- * cleanup. Also called on module unload for any active devices.
- */
static int __devexit pata_platform_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct ata_host *host = dev_get_drvdata(dev);
-
- ata_host_detach(host);
-
- return 0;
+ return __pata_platform_remove(&pdev->dev);
}
static struct platform_driver pata_platform_driver = {
diff --git a/include/linux/pata_platform.h b/include/linux/pata_platform.h
index 5799e8d..6a7a92d 100644
--- a/include/linux/pata_platform.h
+++ b/include/linux/pata_platform.h
@@ -15,4 +15,13 @@
unsigned int irq_flags;
};
+extern int __devinit __pata_platform_probe(struct device *dev,
+ struct resource *io_res,
+ struct resource *ctl_res,
+ struct resource *irq_res,
+ unsigned int ioport_shift,
+ int __pio_mask);
+
+extern int __devexit __pata_platform_remove(struct device *dev);
+
#endif /* __LINUX_PATA_PLATFORM_H */