TTY: 68328serial, remove serial_state and friends
serial_state in 68328serial.h is a duplicated structure. One is
defined in linux/serial.h. So let us use that instead. And since the
serial flags are identical, use ones from there too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 5ce78252..bf5f8111 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -17,6 +17,7 @@
#include <asm/dbg.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/serial.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
@@ -79,18 +80,6 @@
struct tty_driver *serial_driver;
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging... DEBUG_INTR is bad to use when one of the zs
- * lines is your console ;(
- */
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#define RS_ISR_PASS_LIMIT 256
-
static void change_speed(struct m68k_serial *info);
/*
@@ -363,7 +352,7 @@
m68328_uart *uart = &uart_addr[info->line];
unsigned long flags;
- if (info->flags & S_INITIALIZED)
+ if (info->flags & ASYNC_INITIALIZED)
return 0;
if (!info->xmit_buf) {
@@ -404,7 +393,7 @@
change_speed(info);
- info->flags |= S_INITIALIZED;
+ info->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
}
@@ -419,7 +408,7 @@
unsigned long flags;
uart->ustcnt = 0; /* All off! */
- if (!(info->flags & S_INITIALIZED))
+ if (!(info->flags & ASYNC_INITIALIZED))
return;
local_irq_save(flags);
@@ -432,7 +421,7 @@
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- info->flags &= ~S_INITIALIZED;
+ info->flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
@@ -835,11 +824,11 @@
if ((new_serial.baud_base != info->baud_base) ||
(new_serial.type != info->type) ||
(new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~S_USR_MASK) !=
- (info->flags & ~S_USR_MASK)))
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (info->flags & ~ASYNC_USR_MASK)))
return -EPERM;
- info->flags = ((info->flags & ~S_USR_MASK) |
- (new_serial.flags & S_USR_MASK));
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
info->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
@@ -853,8 +842,8 @@
*/
info->baud_base = new_serial.baud_base;
- info->flags = ((info->flags & ~S_FLAGS) |
- (new_serial.flags & S_FLAGS));
+ info->flags = ((info->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
info->type = new_serial.type;
info->close_delay = new_serial.close_delay;
info->closing_wait = new_serial.closing_wait;
@@ -1022,13 +1011,13 @@
local_irq_restore(flags);
return;
}
- info->flags |= S_CLOSING;
+ info->flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
- if (info->closing_wait != S_CLOSING_WAIT_NONE)
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
/*
* At this point we stop accepting input. To do this, we
@@ -1064,7 +1053,7 @@
}
wake_up_interruptible(&info->open_wait);
}
- info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
local_irq_restore(flags);
}
@@ -1083,7 +1072,7 @@
shutdown(info);
info->event = 0;
info->count = 0;
- info->flags &= ~S_NORMAL_ACTIVE;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
info->tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -1104,10 +1093,10 @@
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
- if (info->flags & S_CLOSING) {
+ if (info->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
- if (info->flags & S_HUP_NOTIFY)
+ if (info->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
else
return -ERESTARTSYS;
@@ -1122,7 +1111,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= S_NORMAL_ACTIVE;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1147,9 +1136,9 @@
local_irq_enable();
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
- !(info->flags & S_INITIALIZED)) {
+ !(info->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
- if (info->flags & S_HUP_NOTIFY)
+ if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
@@ -1158,7 +1147,7 @@
#endif
break;
}
- if (!(info->flags & S_CLOSING) && do_clocal)
+ if (!(info->flags & ASYNC_CLOSING) && do_clocal)
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
@@ -1176,7 +1165,7 @@
if (retval)
return retval;
- info->flags |= S_NORMAL_ACTIVE;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}