e1000e: cleanup USLEEP_RANGE checkpatch checks
Resolve strict checkpatch USLEEP_RANGE checks by converting delays and
sleeps as described in ./Documentation/timers/timers-howto.txt. Three
other violations of the text have also been fixed.
CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index e43c944..23d5d90 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1297,7 +1297,7 @@
ew32(CTRL, ctrl_reg);
e1e_flush();
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1323,7 +1323,7 @@
e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
/* Assert SW reset for above settings to take effect */
hw->phy.ops.commit(hw);
- mdelay(1);
+ usleep_range(1000, 2000);
/* Force Full Duplex */
e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
@@ -1364,7 +1364,7 @@
/* force 1000, set loopback */
e1e_wphy(hw, MII_BMCR, 0x4140);
- mdelay(250);
+ msleep(250);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
@@ -1396,7 +1396,7 @@
if (hw->phy.type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1704,7 +1704,7 @@
/* On some Phy/switch combinations, link establishment
* can take a few seconds more than expected.
*/
- msleep(5000);
+ msleep_interruptible(5000);
if (!(er32(STATUS) & E1000_STATUS_LU))
*data = 1;