Merge ../torvalds-2.6/
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 8ae8dad..9474501 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -71,15 +71,6 @@
---------------------------
-What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
-When: November 2005
-Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c
-Why: Match the other drivers' name for the same function, duplicate names
- will be available until removal of old names.
-Who: Grant Coady <gcoady@gmail.com>
-
----------------------------
-
What: remove EXPORT_SYMBOL(panic_timeout)
When: April 2006
Files: kernel/panic.c
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 78f37c2..5d23776 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -54,13 +54,16 @@
use the w83781d driver. However this is not the preferred method
now that this ISA driver has been developed.
-Technically, the w83627thf does not support a VID reading. However, it's
-possible or even likely that your mainboard maker has routed these signals
-to a specific set of general purpose IO pins (the Asus P4C800-E is one such
-board). The w83627thf driver now interprets these as VID. If the VID on
-your board doesn't work, first see doc/vid in the lm_sensors package. If
-that still doesn't help, email us at lm-sensors@lm-sensors.org.
+The w83627_HF_ uses pins 110-106 as VID0-VID4. The w83627_THF_ uses the
+same pins as GPIO[0:4]. Technically, the w83627_THF_ does not support a
+VID reading. However the two chips have the identical 128 pin package. So,
+it is possible or even likely for a w83627thf to have the VID signals routed
+to these pins despite their not being labeled for that purpose. Therefore,
+the w83627thf driver interprets these as VID. If the VID on your board
+doesn't work, first see doc/vid in the lm_sensors package[1]. If that still
+doesn't help, you may just ignore the bogus VID reading with no harm done.
-For further information on this driver see the w83781d driver
-documentation.
+For further information on this driver see the w83781d driver documentation.
+
+[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid
diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2
index e379e18..d751282 100644
--- a/Documentation/i2c/busses/i2c-nforce2
+++ b/Documentation/i2c/busses/i2c-nforce2
@@ -5,7 +5,8 @@
* nForce2 Ultra 400 MCP 10de:0084
* nForce3 Pro150 MCP 10de:00D4
* nForce3 250Gb MCP 10de:00E4
- * nForce4 MCP 10de:0052
+ * nForce4 MCP 10de:0052
+ * nForce4 MCP-04 10de:0034
Datasheet: not publically available, but seems to be similar to the
AMD-8111 SMBus 2.0 adapter.
diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
index 9f1d008..d9f23c0 100644
--- a/Documentation/i2c/busses/i2c-parport
+++ b/Documentation/i2c/busses/i2c-parport
@@ -17,6 +17,7 @@
* Velleman K8000 adapter
* ELV adapter
* Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
+ * Barco LPT->DVI (K5800236) adapter
These devices use different pinout configurations, so you have to tell
the driver what you have, using the type module parameter. There is no
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index 184fac2..f03c2a0 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -1,10 +1,13 @@
-Revision 5, 2005-07-29
+Revision 6, 2005-11-20
Jean Delvare <khali@linux-fr.org>
Greg KH <greg@kroah.com>
This is a guide on how to convert I2C chip drivers from Linux 2.4 to
Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
Then I converted a driver myself (lm83) and updated this document.
+Note that this guide is strongly oriented towards hardware monitoring
+drivers. Many points are still valid for other type of drivers, but
+others may be irrelevant.
There are two sets of points below. The first set concerns technical
changes. The second set concerns coding policy. Both are mandatory.
@@ -22,16 +25,20 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+ #include <linux/jiffies.h>
#include <linux/i2c.h>
+ #include <linux/i2c-isa.h> /* for ISA drivers */
#include <linux/hwmon.h> /* for hardware monitoring drivers */
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h> /* if you need VRM support */
+ #include <linux/err.h> /* for class registration */
#include <asm/io.h> /* if you have I/O operations */
Please respect this inclusion order. Some extra headers may be
required for a given driver (e.g. "lm75.h").
* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses
- are no more handled by the i2c core.
+ are no more handled by the i2c core. Address ranges are no more
+ supported either, define each individual address separately.
SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>.
* [Client data] Get rid of sysctl_id. Try using standard names for
@@ -48,23 +55,23 @@
int kind);
static void lm75_init_client(struct i2c_client *client);
static int lm75_detach_client(struct i2c_client *client);
- static void lm75_update_client(struct i2c_client *client);
+ static struct lm75_data lm75_update_device(struct device *dev);
* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
and functions). Instead, you have to define show and set functions for
each sysfs file. Only define set for writable values. Take a look at an
- existing 2.6 driver for details (lm78 for example). Don't forget
+ existing 2.6 driver for details (it87 for example). Don't forget
to define the attributes for each file (this is that step that
links callback functions). Use the file names specified in
- Documentation/i2c/sysfs-interface for the individual files. Also
+ Documentation/hwmon/sysfs-interface for the individual files. Also
convert the units these files read and write to the specified ones.
If you need to add a new type of file, please discuss it on the
sensors mailing list <lm-sensors@lm-sensors.org> by providing a
- patch to the Documentation/i2c/sysfs-interface file.
+ patch to the Documentation/hwmon/sysfs-interface file.
* [Attach] For I2C drivers, the attach function should make sure
- that the adapter's class has I2C_CLASS_HWMON, using the
- following construct:
+ that the adapter's class has I2C_CLASS_HWMON (or whatever class is
+ suitable for your driver), using the following construct:
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
ISA-only drivers of course don't need this.
@@ -72,63 +79,72 @@
* [Detect] As mentioned earlier, the flags parameter is gone.
The type_name and client_name strings are replaced by a single
- name string, which will be filled with a lowercase, short string
- (typically the driver name, e.g. "lm75").
+ name string, which will be filled with a lowercase, short string.
In i2c-only drivers, drop the i2c_is_isa_adapter check, it's
useless. Same for isa-only drivers, as the test would always be
true. Only hybrid drivers (which are quite rare) still need it.
- The errorN labels are reduced to the number needed. If that number
- is 2 (i2c-only drivers), it is advised that the labels are named
- exit and exit_free. For i2c+isa drivers, labels should be named
- ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
+ The labels used for error paths are reduced to the number needed.
+ It is advised that the labels are given descriptive names such as
+ exit and exit_free. Don't forget to properly set err before
jumping to error labels. By the way, labels should be left-aligned.
Use kzalloc instead of kmalloc.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
- Use strlcpy instead of strcpy to copy the client name.
+ Use strlcpy instead of strcpy or snprintf to copy the client name.
Replace the sysctl directory registration by calls to
device_create_file. Move the driver initialization before any
sysfs file creation.
+ Register the client with the hwmon class (using hwmon_device_register)
+ if applicable.
Drop client->id.
Drop any 24RF08 corruption prevention you find, as this is now done
at the i2c-core level, and doing it twice voids it.
+ Don't add I2C_CLIENT_ALLOW_USE to client->flags, it's the default now.
* [Init] Limits must not be set by the driver (can be done later in
user-space). Chip should not be reset default (although a module
- parameter may be used to force is), and initialization should be
+ parameter may be used to force it), and initialization should be
limited to the strictly necessary steps.
-* [Detach] Get rid of data, remove the call to
- i2c_deregister_entry. Do not log an error message if
- i2c_detach_client fails, as i2c-core will now do it for you.
+* [Detach] Remove the call to i2c_deregister_entry. Do not log an
+ error message if i2c_detach_client fails, as i2c-core will now do
+ it for you.
+ Unregister from the hwmon class if applicable.
-* [Update] Don't access client->data directly, use
- i2c_get_clientdata(client) instead.
+* [Update] The function prototype changed, it is now
+ passed a device structure, which you have to convert to a client
+ using to_i2c_client(dev). The update function should return a
+ pointer to the client data.
+ Don't access client->data directly, use i2c_get_clientdata(client)
+ instead.
+ Use time_after() instead of direct jiffies comparison.
-* [Interface] Init function should not print anything. Make sure
- there is a MODULE_LICENSE() line, at the bottom of the file
- (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this order).
+* [Interface] Make sure there is a MODULE_LICENSE() line, at the bottom
+ of the file (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this
+ order).
+
+* [Driver] The flags field of the i2c_driver structure is gone.
+ I2C_DF_NOTIFY is now the default behavior.
+ The i2c_driver structure has a driver member, which is itself a
+ structure, those name member should be initialized to a driver name
+ string. i2c_driver itself has no name member anymore.
Coding policy:
* [Copyright] Use (C), not (c), for copyright.
* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
- can. Calls to printk/pr_debug for debugging purposes are replaced
- by calls to dev_dbg. Here is an example on how to call it (taken
- from lm75_detect):
+ can. Calls to printk for debugging purposes are replaced by calls to
+ dev_dbg where possible, else to pr_debug. Here is an example of how
+ to call it (taken from lm75_detect):
dev_dbg(&client->dev, "Starting lm75 update\n");
Replace other printk calls with the dev_info, dev_err or dev_warn
function, as appropriate.
-* [Constants] Constants defines (registers, conversions, initial
- values) should be aligned. This greatly improves readability.
- Same goes for variables declarations. Alignments are achieved by the
- means of tabs, not spaces. Remember that tabs are set to 8 in the
- Linux kernel code.
-
-* [Structure definition] The name field should be standardized. All
- lowercase and as simple as the driver name itself (e.g. "lm75").
+* [Constants] Constants defines (registers, conversions) should be
+ aligned. This greatly improves readability.
+ Alignments are achieved by the means of tabs, not spaces. Remember
+ that tabs are set to 8 in the Linux kernel code.
* [Layout] Avoid extra empty lines between comments and what they
comment. Respect the coding style (see Documentation/CodingStyle),
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index d19993c..3a057c8 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -25,9 +25,9 @@
address.
static struct i2c_driver foo_driver = {
- .owner = THIS_MODULE,
- .name = "Foo version 2.3 driver",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "foo",
+ },
.attach_adapter = &foo_attach_adapter,
.detach_client = &foo_detach_client,
.command = &foo_command /* may be NULL */
@@ -36,10 +36,6 @@
The name field must match the driver name, including the case. It must not
contain spaces, and may be up to 31 characters long.
-Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
-means that your driver will be notified when new adapters are found.
-This is almost always what you want.
-
All other fields are for call-back functions which will be explained
below.
@@ -496,17 +492,13 @@
by `__init_data'. Hose functions and structures can be removed after
kernel booting (or module loading) is completed.
+
Command function
================
A generic ioctl-like function call back is supported. You will seldom
-need this. You may even set it to NULL.
-
- /* No commands defined */
- int foo_command(struct i2c_client *client, unsigned int cmd, void *arg)
- {
- return 0;
- }
+need this, and its use is deprecated anyway, so newer design should not
+use it. Set it to NULL.
Sending and receiving
diff --git a/MAINTAINERS b/MAINTAINERS
index cb536bb..554fcec 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2923,6 +2923,12 @@
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
+VT8231 HARDWARE MONITOR DRIVER
+P: Roger Lucas
+M: roger@planbit.co.uk
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index f6d73cc..1b39874 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -124,17 +124,16 @@
}
static struct i2c_driver max7310_i2c_driver = {
- .owner = THIS_MODULE,
- .name = "akita-max7310",
+ .driver = {
+ .name = "akita-max7310",
+ },
.id = I2C_DRIVERID_AKITAIOEXP,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = max7310_attach_adapter,
.detach_client = max7310_detach_client,
};
static struct i2c_client max7310_template = {
name: "akita-max7310",
- flags: I2C_CLIENT_ALLOW_USE,
driver: &max7310_i2c_driver,
};
diff --git a/drivers/acorn/char/pcf8583.c b/drivers/acorn/char/pcf8583.c
index e26f007..9b49f31 100644
--- a/drivers/acorn/char/pcf8583.c
+++ b/drivers/acorn/char/pcf8583.c
@@ -257,9 +257,10 @@
}
static struct i2c_driver pcf8583_driver = {
- .name = "PCF8583",
+ .driver = {
+ .name = "PCF8583",
+ },
.id = I2C_DRIVERID_PCF8583,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = pcf8583_probe,
.detach_client = pcf8583_detach,
.command = pcf8583_command
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index db358cf..c582959 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -350,6 +350,18 @@
This driver can also be built as a module. If so, the module
will be called via686a.
+config SENSORS_VT8231
+ tristate "VT8231"
+ depends on HWMON && I2C && PCI && EXPERIMENTAL
+ select HWMON_VID
+ select I2C_ISA
+ help
+ If you say yes here then you get support for the integrated sensors
+ in the VIA VT8231 device.
+
+ This driver can also be built as a module. If so, the module
+ will be called vt8231.
+
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
depends on HWMON && I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index f7d6a2f..06d4a1d 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -40,6 +40,7 @@
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 8102876..6656127 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -126,10 +126,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver adm1021_driver = {
- .owner = THIS_MODULE,
- .name = "adm1021",
+ .driver = {
+ .name = "adm1021",
+ },
.id = I2C_DRIVERID_ADM1021,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adm1021_attach_adapter,
.detach_client = adm1021_detach_client,
};
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 3ec1242..9331c56 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -118,10 +118,10 @@
*/
static struct i2c_driver adm1025_driver = {
- .owner = THIS_MODULE,
- .name = "adm1025",
+ .driver = {
+ .name = "adm1025",
+ },
.id = I2C_DRIVERID_ADM1025,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adm1025_attach_adapter,
.detach_client = adm1025_detach_client,
};
@@ -287,8 +287,6 @@
struct adm1025_data *data = adm1025_update_device(dev);
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
}
-/* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */
-static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL);
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
@@ -444,8 +442,6 @@
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_alarms);
- /* in1_ref is deprecated, remove after 2005-11-11 */
- device_create_file(&new_client->dev, &dev_attr_in1_ref);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index e0f5654..fefe6e7 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -308,9 +308,9 @@
static struct i2c_driver adm1026_driver = {
- .owner = THIS_MODULE,
- .name = "adm1026",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "adm1026",
+ },
.attach_adapter = adm1026_attach_adapter,
.detach_client = adm1026_detach_client,
};
@@ -1227,8 +1227,6 @@
struct adm1026_data *data = adm1026_update_device(dev);
return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
}
-/* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */
-static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL);
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1673,8 +1671,6 @@
device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable);
device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable);
device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable);
- /* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */
- device_create_file(&new_client->dev, &dev_attr_vid);
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
device_create_file(&new_client->dev, &dev_attr_alarms);
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 7c545d5..d063979 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -105,9 +105,9 @@
/* This is the driver that will be inserted */
static struct i2c_driver adm1031_driver = {
- .owner = THIS_MODULE,
- .name = "adm1031",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "adm1031",
+ },
.attach_adapter = adm1031_attach_adapter,
.detach_client = adm1031_detach_client,
};
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 11dc95f..5ddc22f 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -137,10 +137,10 @@
/* driver data */
static struct i2c_driver adm9240_driver = {
- .owner = THIS_MODULE,
- .name = "adm9240",
+ .driver = {
+ .name = "adm9240",
+ },
.id = I2C_DRIVERID_ADM9240,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adm9240_attach_adapter,
.detach_client = adm9240_detach_client,
};
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 52c4697..ae9de63 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -217,10 +217,10 @@
static void asb100_init_client(struct i2c_client *client);
static struct i2c_driver asb100_driver = {
- .owner = THIS_MODULE,
- .name = "asb100",
+ .driver = {
+ .name = "asb100",
+ },
.id = I2C_DRIVERID_ASB100,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = asb100_attach_adapter,
.detach_client = asb100_detach_client,
};
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 53324f5..b0c4900 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -50,9 +50,9 @@
static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind);
static struct i2c_driver atxp1_driver = {
- .owner = THIS_MODULE,
- .name = "atxp1",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "atxp1",
+ },
.attach_adapter = atxp1_attach_adapter,
.detach_client = atxp1_detach_client,
};
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 34f71b7..203f9c7 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -89,10 +89,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver ds1621_driver = {
- .owner = THIS_MODULE,
- .name = "ds1621",
+ .driver = {
+ .name = "ds1621",
+ },
.id = I2C_DRIVERID_DS1621,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = ds1621_attach_adapter,
.detach_client = ds1621_detach_client,
};
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index a02e1c3..2540918 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -118,10 +118,10 @@
*/
static struct i2c_driver fscher_driver = {
- .owner = THIS_MODULE,
- .name = "fscher",
+ .driver = {
+ .name = "fscher",
+ },
.id = I2C_DRIVERID_FSCHER,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = fscher_attach_adapter,
.detach_client = fscher_detach_client,
};
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 64e4edc..6d0146b 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -100,10 +100,10 @@
* Driver data (common to all clients)
*/
static struct i2c_driver fscpos_driver = {
- .owner = THIS_MODULE,
- .name = "fscpos",
+ .driver = {
+ .name = "fscpos",
+ },
.id = I2C_DRIVERID_FSCPOS,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = fscpos_attach_adapter,
.detach_client = fscpos_detach_client,
};
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 2f178db..9e685e3 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -151,10 +151,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver gl518_driver = {
- .owner = THIS_MODULE,
- .name = "gl518sm",
+ .driver = {
+ .name = "gl518sm",
+ },
.id = I2C_DRIVERID_GL518,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = gl518_attach_adapter,
.detach_client = gl518_detach_client,
};
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index c39ba12..baee60e 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -109,10 +109,10 @@
/* Driver data */
static struct i2c_driver gl520_driver = {
- .owner = THIS_MODULE,
- .name = "gl520sm",
+ .driver = {
+ .name = "gl520sm",
+ },
.id = I2C_DRIVERID_GL520,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = gl520_attach_adapter,
.detach_client = gl520_detach_client,
};
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 312769a..e497274 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -49,20 +49,22 @@
. . . .
11110 = 0.800 V
11111 = 0.000 V (off)
+
+ The 17 specification is in fact Intel Mobile Voltage Positioning -
+ (IMVP-II). You can find more information in the datasheet of Max1718
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+
*/
/* vrm is the VRM/VRD document version multiplied by 10.
val is the 4-, 5- or 6-bit VID code.
Returned value is in mV to avoid floating point in the kernel. */
-int vid_from_reg(int val, int vrm)
+int vid_from_reg(int val, u8 vrm)
{
int vid;
switch(vrm) {
- case 0:
- return 0;
-
case 100: /* VRD 10.0 */
if((val & 0x1f) == 0x1f)
return 0;
@@ -91,10 +93,16 @@
case 84: /* VRM 8.4 */
val &= 0x0f;
/* fall through */
- default: /* VRM 8.2 */
+ case 82: /* VRM 8.2 */
return(val == 0x1f ? 0 :
val & 0x10 ? 5100 - (val) * 100 :
2050 - (val) * 50);
+ case 17: /* Intel IMVP-II */
+ return(val & 0x10 ? 975 - (val & 0xF) * 25 :
+ 1750 - val * 50);
+ default: /* report 0 for unknown */
+ printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n");
+ return 0;
}
}
@@ -108,30 +116,36 @@
u8 vendor;
u8 eff_family;
u8 eff_model;
- int vrm_type;
+ u8 eff_stepping;
+ u8 vrm_type;
};
#define ANY 0xFF
#ifdef CONFIG_X86
+/* the stepping parameter is highest acceptable stepping for current line */
+
static struct vrm_model vrm_models[] = {
- {X86_VENDOR_AMD, 0x6, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, 24}, /* Athlon 64, Opteron */
- {X86_VENDOR_INTEL, 0x6, 0x9, 85}, /* 0.13um too */
- {X86_VENDOR_INTEL, 0x6, 0xB, 85}, /* Tualatin */
- {X86_VENDOR_INTEL, 0x6, ANY, 82}, /* any P6 */
- {X86_VENDOR_INTEL, 0x7, ANY, 0}, /* Itanium */
- {X86_VENDOR_INTEL, 0xF, 0x0, 90}, /* P4 */
- {X86_VENDOR_INTEL, 0xF, 0x1, 90}, /* P4 Willamette */
- {X86_VENDOR_INTEL, 0xF, 0x2, 90}, /* P4 Northwood */
- {X86_VENDOR_INTEL, 0xF, 0x3, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0xF, 0x4, 100}, /* P4 Prescott */
- {X86_VENDOR_INTEL, 0x10,ANY, 0}, /* Itanium 2 */
- {X86_VENDOR_UNKNOWN, ANY, ANY, 0} /* stop here */
+ {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
+ {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
+ {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 85}, /* 0.13um too */
+ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
+ {X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */
+ {X86_VENDOR_INTEL, 0x7, ANY, ANY, 0}, /* Itanium */
+ {X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */
+ {X86_VENDOR_INTEL, 0xF, 0x1, ANY, 90}, /* P4 Willamette */
+ {X86_VENDOR_INTEL, 0xF, 0x2, ANY, 90}, /* P4 Northwood */
+ {X86_VENDOR_INTEL, 0xF, ANY, ANY, 100}, /* Prescott and above assume VRD 10 */
+ {X86_VENDOR_INTEL, 0x10, ANY, ANY, 0}, /* Itanium 2 */
+ {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */
+ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M */
+ {X86_VENDOR_UNKNOWN, ANY, ANY, ANY, 0} /* stop here */
};
-static int find_vrm(u8 eff_family, u8 eff_model, u8 vendor)
+static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
{
int i = 0;
@@ -139,7 +153,8 @@
if (vrm_models[i].vendor==vendor)
if ((vrm_models[i].eff_family==eff_family)
&& ((vrm_models[i].eff_model==eff_model) ||
- (vrm_models[i].eff_model==ANY)))
+ (vrm_models[i].eff_model==ANY)) &&
+ (eff_stepping <= vrm_models[i].eff_stepping))
return vrm_models[i].vrm_type;
i++;
}
@@ -147,12 +162,11 @@
return 0;
}
-int vid_which_vrm(void)
+u8 vid_which_vrm(void)
{
struct cpuinfo_x86 *c = cpu_data;
u32 eax;
- u8 eff_family, eff_model;
- int vrm_ret;
+ u8 eff_family, eff_model, eff_stepping, vrm_ret;
if (c->x86 < 6) /* Any CPU with family lower than 6 */
return 0; /* doesn't have VID and/or CPUID */
@@ -160,20 +174,21 @@
eax = cpuid_eax(1);
eff_family = ((eax & 0x00000F00)>>8);
eff_model = ((eax & 0x000000F0)>>4);
+ eff_stepping = eax & 0xF;
if (eff_family == 0xF) { /* use extended model & family */
eff_family += ((eax & 0x00F00000)>>20);
eff_model += ((eax & 0x000F0000)>>16)<<4;
}
- vrm_ret = find_vrm(eff_family,eff_model,c->x86_vendor);
+ vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
if (vrm_ret == 0)
printk(KERN_INFO "hwmon-vid: Unknown VRM version of your "
"x86 CPU\n");
return vrm_ret;
}
-/* and now something completely different for the non-x86 world */
+/* and now for something completely different for the non-x86 world */
#else
-int vid_which_vrm(void)
+u8 vid_which_vrm(void)
{
printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
return 0;
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a61f5d0..0da7c9c 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -213,7 +213,7 @@
u8 sensor; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
- int vrm;
+ u8 vrm;
u32 alarms; /* Register encoding, combined */
u8 fan_main_ctrl; /* Register value */
u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
@@ -234,17 +234,18 @@
static struct i2c_driver it87_driver = {
- .owner = THIS_MODULE,
- .name = "it87",
+ .driver = {
+ .name = "it87",
+ },
.id = I2C_DRIVERID_IT87,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = it87_attach_adapter,
.detach_client = it87_detach_client,
};
static struct i2c_driver it87_isa_driver = {
- .owner = THIS_MODULE,
- .name = "it87-isa",
+ .driver = {
+ .name = "it87-isa",
+ },
.attach_adapter = it87_isa_attach_adapter,
.detach_client = it87_detach_client,
};
@@ -668,7 +669,7 @@
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%ld\n", (long) data->vrm);
+ return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
@@ -761,7 +762,8 @@
/* Reserve the ISA region */
if (is_isa)
- if (!request_region(address, IT87_EXTENT, it87_isa_driver.name))
+ if (!request_region(address, IT87_EXTENT,
+ it87_isa_driver.driver.name))
goto ERROR0;
/* For now, we presume we have a valid client. We create the
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 954ec24..6b1aa7e 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -139,9 +139,9 @@
*/
static struct i2c_driver lm63_driver = {
- .owner = THIS_MODULE,
- .name = "lm63",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "lm63",
+ },
.attach_adapter = lm63_attach_adapter,
.detach_client = lm63_detach_client,
};
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index d70f4c8..74ca2c8 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -66,10 +66,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver lm75_driver = {
- .owner = THIS_MODULE,
- .name = "lm75",
+ .driver = {
+ .name = "lm75",
+ },
.id = I2C_DRIVERID_LM75,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm75_attach_adapter,
.detach_client = lm75_detach_client,
};
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 9380fda..a2f420d 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -74,9 +74,9 @@
/* This is the driver that will be inserted */
static struct i2c_driver lm77_driver = {
- .owner = THIS_MODULE,
- .name = "lm77",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "lm77",
+ },
.attach_adapter = lm77_attach_adapter,
.detach_client = lm77_detach_client,
};
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 78cdd50..e404001 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -164,17 +164,18 @@
static struct i2c_driver lm78_driver = {
- .owner = THIS_MODULE,
- .name = "lm78",
+ .driver = {
+ .name = "lm78",
+ },
.id = I2C_DRIVERID_LM78,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm78_attach_adapter,
.detach_client = lm78_detach_client,
};
static struct i2c_driver lm78_isa_driver = {
- .owner = THIS_MODULE,
- .name = "lm78-isa",
+ .driver = {
+ .name = "lm78-isa",
+ },
.attach_adapter = lm78_isa_attach_adapter,
.detach_client = lm78_detach_client,
};
@@ -497,7 +498,7 @@
/* Reserve the ISA region */
if (is_isa)
if (!request_region(address, LM78_EXTENT,
- lm78_isa_driver.name)) {
+ lm78_isa_driver.driver.name)) {
err = -EBUSY;
goto ERROR0;
}
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index c359fde..c9a7cde 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -143,10 +143,10 @@
*/
static struct i2c_driver lm80_driver = {
- .owner = THIS_MODULE,
- .name = "lm80",
+ .driver = {
+ .name = "lm80",
+ },
.id = I2C_DRIVERID_LM80,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm80_attach_adapter,
.detach_client = lm80_detach_client,
};
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 9a70611..26dfa9e 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -124,10 +124,10 @@
*/
static struct i2c_driver lm83_driver = {
- .owner = THIS_MODULE,
- .name = "lm83",
+ .driver = {
+ .name = "lm83",
+ },
.id = I2C_DRIVERID_LM83,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm83_attach_adapter,
.detach_client = lm83_detach_client,
};
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index d1070ed..7389a01 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -380,10 +380,10 @@
static struct i2c_driver lm85_driver = {
- .owner = THIS_MODULE,
- .name = "lm85",
+ .driver = {
+ .name = "lm85",
+ },
.id = I2C_DRIVERID_LM85,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm85_attach_adapter,
.detach_client = lm85_detach_client,
};
@@ -443,7 +443,17 @@
static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+ int vid;
+
+ if (data->type == adt7463 && (data->vid & 0x80)) {
+ /* 6-pin VID (VRM 10) */
+ vid = vid_from_reg(data->vid & 0x3f, data->vrm);
+ } else {
+ /* 5-pin VID (VRM 9) */
+ vid = vid_from_reg(data->vid & 0x1f, data->vrm);
+ }
+
+ return sprintf(buf, "%d\n", vid);
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
@@ -1176,17 +1186,14 @@
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_temp3_input);
@@ -1224,6 +1231,15 @@
device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
+ /* The ADT7463 has an optional VRM 10 mode where pin 21 is used
+ as a sixth digital VID input rather than an analog input. */
+ data->vid = lm85_read_value(new_client, LM85_REG_VID);
+ if (!(kind == adt7463 && (data->vid & 0x80))) {
+ device_create_file(&new_client->dev, &dev_attr_in4_input);
+ device_create_file(&new_client->dev, &dev_attr_in4_min);
+ device_create_file(&new_client->dev, &dev_attr_in4_max);
+ }
+
return 0;
/* Error out and cleanup code */
@@ -1382,11 +1398,18 @@
irrelevant. So it is left in 4*/
data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
- for (i = 0; i <= 4; ++i) {
+ data->vid = lm85_read_value(client, LM85_REG_VID);
+
+ for (i = 0; i <= 3; ++i) {
data->in[i] =
lm85_read_value(client, LM85_REG_IN(i));
}
+ if (!(data->type == adt7463 && (data->vid & 0x80))) {
+ data->in[4] = lm85_read_value(client,
+ LM85_REG_IN(4));
+ }
+
for (i = 0; i <= 3; ++i) {
data->fan[i] =
lm85_read_value(client, LM85_REG_FAN(i));
@@ -1450,13 +1473,20 @@
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
- for (i = 0; i <= 4; ++i) {
+ for (i = 0; i <= 3; ++i) {
data->in_min[i] =
lm85_read_value(client, LM85_REG_IN_MIN(i));
data->in_max[i] =
lm85_read_value(client, LM85_REG_IN_MAX(i));
}
+ if (!(data->type == adt7463 && (data->vid & 0x80))) {
+ data->in_min[4] = lm85_read_value(client,
+ LM85_REG_IN_MIN(4));
+ data->in_max[4] = lm85_read_value(client,
+ LM85_REG_IN_MAX(4));
+ }
+
if ( data->type == emc6d100 ) {
for (i = 5; i <= 7; ++i) {
data->in_min[i] =
@@ -1478,8 +1508,6 @@
lm85_read_value(client, LM85_REG_TEMP_MAX(i));
}
- data->vid = lm85_read_value(client, LM85_REG_VID);
-
for (i = 0; i <= 2; ++i) {
int val ;
data->autofan[i].config =
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index eeec1817..6ba34c3 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -161,10 +161,10 @@
*/
static struct i2c_driver lm87_driver = {
- .owner = THIS_MODULE,
- .name = "lm87",
+ .driver = {
+ .name = "lm87",
+ },
.id = I2C_DRIVERID_LM87,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm87_attach_adapter,
.detach_client = lm87_detach_client,
};
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 83cf2e1..56794644 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -186,10 +186,10 @@
*/
static struct i2c_driver lm90_driver = {
- .owner = THIS_MODULE,
- .name = "lm90",
+ .driver = {
+ .name = "lm90",
+ },
.id = I2C_DRIVERID_LM90,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm90_attach_adapter,
.detach_client = lm90_detach_client,
};
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 7a4b3701..b0c4cb7 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -410,10 +410,10 @@
*/
static struct i2c_driver lm92_driver = {
- .owner = THIS_MODULE,
- .name = "lm92",
+ .driver = {
+ .name = "lm92",
+ },
.id = I2C_DRIVERID_LM92,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = lm92_attach_adapter,
.detach_client = lm92_detach_client,
};
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 69e7e12..3abe330 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -90,9 +90,9 @@
*/
static struct i2c_driver max1619_driver = {
- .owner = THIS_MODULE,
- .name = "max1619",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "max1619",
+ },
.attach_adapter = max1619_attach_adapter,
.detach_client = max1619_detach_client,
};
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 17f745a..f161e88 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -236,8 +236,9 @@
*/
static struct i2c_driver pc87360_driver = {
- .owner = THIS_MODULE,
- .name = "pc87360",
+ .driver = {
+ .name = "pc87360",
+ },
.attach_adapter = pc87360_detect,
.detach_client = pc87360_detach_client,
};
@@ -798,7 +799,7 @@
for (i = 0; i < 3; i++) {
if (((data->address[i] = extra_isa[i]))
&& !request_region(extra_isa[i], PC87360_EXTENT,
- pc87360_driver.name)) {
+ pc87360_driver.driver.name)) {
dev_err(&new_client->dev, "Region 0x%x-0x%x already "
"in use!\n", extra_isa[i],
extra_isa[i]+PC87360_EXTENT-1);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 9c6cade..8be5189 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -198,8 +198,9 @@
static void sis5595_init_client(struct i2c_client *client);
static struct i2c_driver sis5595_driver = {
- .owner = THIS_MODULE,
- .name = "sis5595",
+ .driver = {
+ .name = "sis5595",
+ },
.attach_adapter = sis5595_detect,
.detach_client = sis5595_detach_client,
};
@@ -484,7 +485,8 @@
if (force_addr)
address = force_addr & ~(SIS5595_EXTENT - 1);
/* Reserve the ISA region */
- if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) {
+ if (!request_region(address, SIS5595_EXTENT,
+ sis5595_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 2a3e21b..8663bbb 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -226,8 +226,9 @@
static int smsc47b397_detect(struct i2c_adapter *adapter);
static struct i2c_driver smsc47b397_driver = {
- .owner = THIS_MODULE,
- .name = "smsc47b397",
+ .driver = {
+ .name = "smsc47b397",
+ },
.attach_adapter = smsc47b397_detect,
.detach_client = smsc47b397_detach_client,
};
@@ -238,7 +239,8 @@
struct smsc47b397_data *data;
int err = 0;
- if (!request_region(address, SMSC_EXTENT, smsc47b397_driver.name)) {
+ if (!request_region(address, SMSC_EXTENT,
+ smsc47b397_driver.driver.name)) {
dev_err(&adapter->dev, "Region 0x%x already in use!\n",
address);
return -EBUSY;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 5905c1a..d1e3ec0 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -126,8 +126,9 @@
static struct i2c_driver smsc47m1_driver = {
- .owner = THIS_MODULE,
- .name = "smsc47m1",
+ .driver = {
+ .name = "smsc47m1",
+ },
.attach_adapter = smsc47m1_detect,
.detach_client = smsc47m1_detach_client,
};
@@ -394,7 +395,7 @@
int err = 0;
int fan1, fan2, pwm1, pwm2;
- if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
+ if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.driver.name)) {
dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
return -EBUSY;
}
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 6f696f8..cb01848 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -572,8 +572,9 @@
/* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver via686a_driver = {
- .owner = THIS_MODULE,
- .name = "via686a",
+ .driver = {
+ .name = "via686a",
+ },
.attach_adapter = via686a_detect,
.detach_client = via686a_detach_client,
};
@@ -615,7 +616,8 @@
}
/* Reserve the ISA region */
- if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) {
+ if (!request_region(address, VIA686A_EXTENT,
+ via686a_driver.driver.name)) {
dev_err(&adapter->dev, "region 0x%x already in use!\n",
address);
return -ENODEV;
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
new file mode 100644
index 0000000..d00a726
--- /dev/null
+++ b/drivers/hwmon/vt8231.c
@@ -0,0 +1,862 @@
+/*
+ vt8231.c - Part of lm_sensors, Linux kernel modules
+ for hardware monitoring
+
+ Copyright (c) 2005 Roger Lucas <roger@planbit.co.uk>
+ Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Aaron M. Marsh <amarsh@sdf.lonestar.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* Supports VIA VT8231 South Bridge embedded sensors
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-isa.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+static int force_addr;
+module_param(force_addr, int, 0);
+MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");
+
+/* Device address
+ Note that we can't determine the ISA address until we have initialized
+ our module */
+static unsigned short isa_address;
+
+#define VT8231_EXTENT 0x80
+#define VT8231_BASE_REG 0x70
+#define VT8231_ENABLE_REG 0x74
+
+/* The VT8231 registers
+
+ The reset value for the input channel configuration is used (Reg 0x4A=0x07)
+ which sets the selected inputs marked with '*' below if multiple options are
+ possible:
+
+ Voltage Mode Temperature Mode
+ Sensor Linux Id Linux Id VIA Id
+ -------- -------- -------- ------
+ CPU Diode N/A temp1 0
+ UIC1 in0 temp2 * 1
+ UIC2 in1 * temp3 2
+ UIC3 in2 * temp4 3
+ UIC4 in3 * temp5 4
+ UIC5 in4 * temp6 5
+ 3.3V in5 N/A
+
+ Note that the BIOS may set the configuration register to a different value
+ to match the motherboard configuration.
+*/
+
+/* fans numbered 0-1 */
+#define VT8231_REG_FAN_MIN(nr) (0x3b + (nr))
+#define VT8231_REG_FAN(nr) (0x29 + (nr))
+
+/* Voltage inputs numbered 0-5 */
+
+static const u8 regvolt[] = { 0x21, 0x22, 0x23, 0x24, 0x25, 0x26 };
+static const u8 regvoltmax[] = { 0x3d, 0x2b, 0x2d, 0x2f, 0x31, 0x33 };
+static const u8 regvoltmin[] = { 0x3e, 0x2c, 0x2e, 0x30, 0x32, 0x34 };
+
+/* Temperatures are numbered 1-6 according to the Linux kernel specification.
+**
+** In the VIA datasheet, however, the temperatures are numbered from zero.
+** Since it is important that this driver can easily be compared to the VIA
+** datasheet, we will use the VIA numbering within this driver and map the
+** kernel sysfs device name to the VIA number in the sysfs callback.
+*/
+
+#define VT8231_REG_TEMP_LOW01 0x49
+#define VT8231_REG_TEMP_LOW25 0x4d
+
+static const u8 regtemp[] = { 0x1f, 0x21, 0x22, 0x23, 0x24, 0x25 };
+static const u8 regtempmax[] = { 0x39, 0x3d, 0x2b, 0x2d, 0x2f, 0x31 };
+static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
+
+#define TEMP_FROM_REG(reg) (((253 * 4 - (reg)) * 550 + 105) / 210)
+#define TEMP_MAXMIN_FROM_REG(reg) (((253 - (reg)) * 2200 + 105) / 210)
+#define TEMP_MAXMIN_TO_REG(val) (253 - ((val) * 210 + 1100) / 2200)
+
+#define VT8231_REG_CONFIG 0x40
+#define VT8231_REG_ALARM1 0x41
+#define VT8231_REG_ALARM2 0x42
+#define VT8231_REG_FANDIV 0x47
+#define VT8231_REG_UCH_CONFIG 0x4a
+#define VT8231_REG_TEMP1_CONFIG 0x4b
+#define VT8231_REG_TEMP2_CONFIG 0x4c
+
+/* temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
+** numbering
+*/
+#define ISTEMP(i, ch_config) ((i) == 0 ? 1 : \
+ ((ch_config) >> ((i)+1)) & 0x01)
+/* voltages 0-5 */
+#define ISVOLT(i, ch_config) ((i) == 5 ? 1 : \
+ !(((ch_config) >> ((i)+2)) & 0x01))
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/* NB The values returned here are NOT temperatures. The calibration curves
+** for the thermistor curves are board-specific and must go in the
+** sensors.conf file. Temperature sensors are actually ten bits, but the
+** VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
+** register. The temperature value returned should have a magnitude of 3,
+** so we use the VIA scaling as the "true" scaling and use the remaining 2
+** LSBs as fractional precision.
+**
+** All the on-chip hardware temperature comparisons for the alarms are only
+** 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
+** in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
+** ignored.
+*/
+
+/******** FAN RPM CONVERSIONS ********
+** This chip saturates back at 0, not at 255 like many the other chips.
+** So, 0 means 0 RPM
+*/
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 0;
+ return SENSORS_LIMIT(1310720 / (rpm * div), 1, 255);
+}
+
+#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
+
+struct vt8231_data {
+ struct i2c_client client;
+ struct semaphore update_lock;
+ struct class_device *class_dev;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u8 in[6]; /* Register value */
+ u8 in_max[6]; /* Register value */
+ u8 in_min[6]; /* Register value */
+ u16 temp[6]; /* Register value 10 bit, right aligned */
+ u8 temp_max[6]; /* Register value */
+ u8 temp_min[6]; /* Register value */
+ u8 fan[2]; /* Register value */
+ u8 fan_min[2]; /* Register value */
+ u8 fan_div[2]; /* Register encoding, shifted right */
+ u16 alarms; /* Register encoding */
+ u8 uch_config;
+};
+
+static struct pci_dev *s_bridge;
+static int vt8231_detect(struct i2c_adapter *adapter);
+static int vt8231_detach_client(struct i2c_client *client);
+static struct vt8231_data *vt8231_update_device(struct device *dev);
+static void vt8231_init_client(struct i2c_client *client);
+
+static inline int vt8231_read_value(struct i2c_client *client, u8 reg)
+{
+ return inb_p(client->addr + reg);
+}
+
+static inline void vt8231_write_value(struct i2c_client *client, u8 reg,
+ u8 value)
+{
+ outb_p(value, client->addr + reg);
+}
+
+/* following are the sysfs callback functions */
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", ((data->in[nr] - 3) * 10000) / 958);
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", ((data->in_min[nr] - 3) * 10000) / 958);
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", (((data->in_max[nr] - 3) * 10000) / 958));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
+ vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
+ vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+/* Special case for input 5 as this has 3.3V scaling built into the chip */
+static ssize_t show_in5(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t show_in5_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in_min[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t show_in5_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in_max[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
+ vt8231_write_value(client, regvoltmin[5], data->in_min[5]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in5_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
+ vt8231_write_value(client, regvoltmax[5], data->in_max[5]);
+ up(&data->update_lock);
+ return count;
+}
+
+#define define_voltage_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset)
+
+define_voltage_sysfs(0);
+define_voltage_sysfs(1);
+define_voltage_sysfs(2);
+define_voltage_sysfs(3);
+define_voltage_sysfs(4);
+
+static DEVICE_ATTR(in5_input, S_IRUGO, show_in5, NULL);
+static DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR, show_in5_min, set_in5_min);
+static DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR, show_in5_max, set_in5_max);
+
+/* Temperatures */
+static ssize_t show_temp0(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp[0] * 250);
+}
+
+static ssize_t show_temp0_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_max[0] * 1000);
+}
+
+static ssize_t show_temp0_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_min[0] * 1000);
+}
+
+static ssize_t set_temp0_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
+ vt8231_write_value(client, regtempmax[0], data->temp_max[0]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
+ vt8231_write_value(client, regtempmin[0], data->temp_min[0]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_max[nr]));
+}
+
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_min[nr]));
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+/* Note that these map the Linux temperature sensor numbering (1-6) to the VIA
+** temperature sensor numbering (0-5)
+*/
+#define define_temperature_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+ show_temp_min, set_temp_min, offset - 1)
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp0, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp0_max, set_temp0_max);
+static DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp0_min, set_temp0_min);
+
+define_temperature_sysfs(2);
+define_temperature_sysfs(3);
+define_temperature_sysfs(4);
+define_temperature_sysfs(5);
+define_temperature_sysfs(6);
+
+#define CFG_INFO_TEMP(id) { &sensor_dev_attr_temp##id##_input.dev_attr, \
+ &sensor_dev_attr_temp##id##_min.dev_attr, \
+ &sensor_dev_attr_temp##id##_max.dev_attr }
+#define CFG_INFO_VOLT(id) { &sensor_dev_attr_in##id##_input.dev_attr, \
+ &sensor_dev_attr_in##id##_min.dev_attr, \
+ &sensor_dev_attr_in##id##_max.dev_attr }
+
+struct str_device_attr_table {
+ struct device_attribute *input;
+ struct device_attribute *min;
+ struct device_attribute *max;
+};
+
+static struct str_device_attr_table cfg_info_temp[] = {
+ { &dev_attr_temp1_input, &dev_attr_temp1_min, &dev_attr_temp1_max },
+ CFG_INFO_TEMP(2),
+ CFG_INFO_TEMP(3),
+ CFG_INFO_TEMP(4),
+ CFG_INFO_TEMP(5),
+ CFG_INFO_TEMP(6)
+};
+
+static struct str_device_attr_table cfg_info_volt[] = {
+ CFG_INFO_VOLT(0),
+ CFG_INFO_VOLT(1),
+ CFG_INFO_VOLT(2),
+ CFG_INFO_VOLT(3),
+ CFG_INFO_VOLT(4),
+ { &dev_attr_in5_input, &dev_attr_in5_min, &dev_attr_in5_max }
+};
+
+/* Fans */
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int nr = sensor_attr->index;
+ int old = vt8231_read_value(client, VT8231_REG_FANDIV);
+ long min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+
+ down(&data->update_lock);
+ switch (val) {
+ case 1: data->fan_div[nr] = 0; break;
+ case 2: data->fan_div[nr] = 1; break;
+ case 4: data->fan_div[nr] = 2; break;
+ case 8: data->fan_div[nr] = 3; break;
+ default:
+ dev_err(&client->dev, "fan_div value %ld not supported."
+ "Choose one of 1, 2, 4 or 8!\n", val);
+ up(&data->update_lock);
+ return -EINVAL;
+ }
+
+ /* Correct the fan minimum speed */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+ old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
+ vt8231_write_value(client, VT8231_REG_FANDIV, old);
+ up(&data->update_lock);
+ return count;
+}
+
+
+#define define_fan_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1)
+
+define_fan_sysfs(1);
+define_fan_sysfs(2);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static struct i2c_driver vt8231_driver = {
+ .driver = {
+ .name = "vt8231",
+ },
+ .attach_adapter = vt8231_detect,
+ .detach_client = vt8231_detach_client,
+};
+
+static struct pci_device_id vt8231_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, vt8231_pci_ids);
+
+static int __devinit vt8231_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+
+static struct pci_driver vt8231_pci_driver = {
+ .name = "vt8231",
+ .id_table = vt8231_pci_ids,
+ .probe = vt8231_pci_probe,
+};
+
+int vt8231_detect(struct i2c_adapter *adapter)
+{
+ struct i2c_client *client;
+ struct vt8231_data *data;
+ int err = 0, i;
+ u16 val;
+
+ /* 8231 requires multiple of 256 */
+ if (force_addr) {
+ isa_address = force_addr & 0xFF00;
+ dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
+ isa_address);
+ if (PCIBIOS_SUCCESSFUL != pci_write_config_word(s_bridge,
+ VT8231_BASE_REG, isa_address))
+ return -ENODEV;
+ }
+
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_read_config_word(s_bridge, VT8231_ENABLE_REG, &val))
+ return -ENODEV;
+
+ if (!(val & 0x0001)) {
+ dev_warn(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VT8231_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ }
+
+ /* Reserve the ISA region */
+ if (!request_region(isa_address, VT8231_EXTENT,
+ vt8231_pci_driver.name)) {
+ dev_err(&adapter->dev, "region 0x%x already in use!\n",
+ isa_address);
+ return -ENODEV;
+ }
+
+ if (!(data = kzalloc(sizeof(struct vt8231_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = isa_address;
+ client->adapter = adapter;
+ client->driver = &vt8231_driver;
+ client->dev.parent = &adapter->dev;
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(client->name, "vt8231", I2C_NAME_SIZE);
+
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ vt8231_init_client(client);
+
+ /* Register sysfs hooks */
+ data->class_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_detach;
+ }
+
+ /* Must update device information to find out the config field */
+ data->uch_config = vt8231_read_value(client, VT8231_REG_UCH_CONFIG);
+
+ for (i = 0; i < ARRAY_SIZE(cfg_info_temp); i++) {
+ if (ISTEMP(i, data->uch_config)) {
+ device_create_file(&client->dev,
+ cfg_info_temp[i].input);
+ device_create_file(&client->dev, cfg_info_temp[i].max);
+ device_create_file(&client->dev, cfg_info_temp[i].min);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cfg_info_volt); i++) {
+ if (ISVOLT(i, data->uch_config)) {
+ device_create_file(&client->dev,
+ cfg_info_volt[i].input);
+ device_create_file(&client->dev, cfg_info_volt[i].max);
+ device_create_file(&client->dev, cfg_info_volt[i].min);
+ }
+ }
+
+ device_create_file(&client->dev, &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan1_min.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan2_min.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan1_div.dev_attr);
+ device_create_file(&client->dev, &sensor_dev_attr_fan2_div.dev_attr);
+
+ device_create_file(&client->dev, &dev_attr_alarms);
+ return 0;
+
+exit_detach:
+ i2c_detach_client(client);
+exit_free:
+ kfree(data);
+exit_release:
+ release_region(isa_address, VT8231_EXTENT);
+ return err;
+}
+
+static int vt8231_detach_client(struct i2c_client *client)
+{
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int err;
+
+ hwmon_device_unregister(data->class_dev);
+
+ if ((err = i2c_detach_client(client))) {
+ return err;
+ }
+
+ release_region(client->addr, VT8231_EXTENT);
+ kfree(data);
+
+ return 0;
+}
+
+static void vt8231_init_client(struct i2c_client *client)
+{
+ vt8231_write_value(client, VT8231_REG_TEMP1_CONFIG, 0);
+ vt8231_write_value(client, VT8231_REG_TEMP2_CONFIG, 0);
+}
+
+static struct vt8231_data *vt8231_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct vt8231_data *data = i2c_get_clientdata(client);
+ int i;
+ u16 low;
+
+ down(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ for (i = 0; i < 6; i++) {
+ if (ISVOLT(i, data->uch_config)) {
+ data->in[i] = vt8231_read_value(client,
+ regvolt[i]);
+ data->in_min[i] = vt8231_read_value(client,
+ regvoltmin[i]);
+ data->in_max[i] = vt8231_read_value(client,
+ regvoltmax[i]);
+ }
+ }
+ for (i = 0; i < 2; i++) {
+ data->fan[i] = vt8231_read_value(client,
+ VT8231_REG_FAN(i));
+ data->fan_min[i] = vt8231_read_value(client,
+ VT8231_REG_FAN_MIN(i));
+ }
+
+ low = vt8231_read_value(client, VT8231_REG_TEMP_LOW01);
+ low = (low >> 6) | ((low & 0x30) >> 2)
+ | (vt8231_read_value(client, VT8231_REG_TEMP_LOW25) << 4);
+ for (i = 0; i < 6; i++) {
+ if (ISTEMP(i, data->uch_config)) {
+ data->temp[i] = (vt8231_read_value(client,
+ regtemp[i]) << 2)
+ | ((low >> (2 * i)) & 0x03);
+ data->temp_max[i] = vt8231_read_value(client,
+ regtempmax[i]);
+ data->temp_min[i] = vt8231_read_value(client,
+ regtempmin[i]);
+ }
+ }
+
+ i = vt8231_read_value(client, VT8231_REG_FANDIV);
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = i >> 6;
+ data->alarms = vt8231_read_value(client, VT8231_REG_ALARM1) |
+ (vt8231_read_value(client, VT8231_REG_ALARM2) << 8);
+
+ /* Set alarm flags correctly */
+ if (!data->fan[0] && data->fan_min[0]) {
+ data->alarms |= 0x40;
+ } else if (data->fan[0] && !data->fan_min[0]) {
+ data->alarms &= ~0x40;
+ }
+
+ if (!data->fan[1] && data->fan_min[1]) {
+ data->alarms |= 0x80;
+ } else if (data->fan[1] && !data->fan_min[1]) {
+ data->alarms &= ~0x80;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+static int __devinit vt8231_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ u16 val;
+
+ if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_BASE_REG,
+ &val))
+ return -ENODEV;
+
+ isa_address = val & ~(VT8231_EXTENT - 1);
+ if (isa_address == 0 && force_addr == 0) {
+ dev_err(&dev->dev, "base address not set -\
+ upgrade BIOS or use force_addr=0xaddr\n");
+ return -ENODEV;
+ }
+
+ s_bridge = pci_dev_get(dev);
+
+ if (i2c_isa_add_driver(&vt8231_driver)) {
+ pci_dev_put(s_bridge);
+ s_bridge = NULL;
+ }
+
+ /* Always return failure here. This is to allow other drivers to bind
+ * to this pci device. We don't really want to have control over the
+ * pci device, we only wanted to read as few register values from it.
+ */
+ return -ENODEV;
+}
+
+static int __init sm_vt8231_init(void)
+{
+ return pci_module_init(&vt8231_pci_driver);
+}
+
+static void __exit sm_vt8231_exit(void)
+{
+ pci_unregister_driver(&vt8231_pci_driver);
+ if (s_bridge != NULL) {
+ i2c_isa_del_driver(&vt8231_driver);
+ pci_dev_put(s_bridge);
+ s_bridge = NULL;
+ }
+}
+
+MODULE_AUTHOR("Roger Lucas <roger@planbit.co.uk>");
+MODULE_DESCRIPTION("VT8231 sensors");
+MODULE_LICENSE("GPL");
+
+module_init(sm_vt8231_init);
+module_exit(sm_vt8231_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index eee22a5..12d79f5 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -676,7 +676,7 @@
int i, err = 0;
if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
- w83627ehf_driver.name)) {
+ w83627ehf_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
@@ -785,8 +785,9 @@
}
static struct i2c_driver w83627ehf_driver = {
- .owner = THIS_MODULE,
- .name = "w83627ehf",
+ .driver = {
+ .name = "w83627ehf",
+ },
.attach_adapter = w83627ehf_detect,
.detach_client = w83627ehf_detach_client,
};
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index bbb3dcd..7ea441d 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -332,8 +332,9 @@
static void w83627hf_init_client(struct i2c_client *client);
static struct i2c_driver w83627hf_driver = {
- .owner = THIS_MODULE,
- .name = "w83627hf",
+ .driver = {
+ .name = "w83627hf",
+ },
.attach_adapter = w83627hf_detect,
.detach_client = w83627hf_detach_client,
};
@@ -1009,7 +1010,7 @@
address = force_addr & WINB_ALIGNMENT;
if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE,
- w83627hf_driver.name)) {
+ w83627hf_driver.driver.name)) {
err = -EBUSY;
goto ERROR0;
}
@@ -1122,11 +1123,10 @@
if (kind != w83697hf)
device_create_file_temp(new_client, 3);
- if (kind != w83697hf)
+ if (kind != w83697hf && data->vid != 0xff) {
device_create_file_vid(new_client);
-
- if (kind != w83697hf)
device_create_file_vrm(new_client);
+ }
device_create_file_fan_div(new_client, 1);
device_create_file_fan_div(new_client, 2);
@@ -1232,7 +1232,7 @@
/* Make sure the pins are configured for input
There must be at least five (VRM 9), and possibly 6 (VRM 10) */
- sel = superio_inb(W83627THF_GPIO5_IOSR);
+ sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
if ((sel & 0x1f) != 0x1f) {
dev_dbg(&client->dev, "GPIO5 not configured for VID "
"function\n");
@@ -1323,19 +1323,18 @@
int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
} else if (w83627thf == data->type) {
- data->vid = w83627thf_read_gpio5(client) & 0x3f;
+ data->vid = w83627thf_read_gpio5(client);
}
/* Read VRM & OVT Config only once */
if (w83627thf == data->type || w83637hf == data->type) {
data->vrm_ovt =
w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
- data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82;
- } else {
- /* Convert VID to voltage based on default VRM */
- data->vrm = vid_which_vrm();
}
+ /* Convert VID to voltage based on VRM */
+ data->vrm = vid_which_vrm();
+
tmp = w83627hf_read_value(client, W83781D_REG_SCFG1);
for (i = 1; i <= 3; i++) {
if (!(tmp & BIT_SCFG1[i - 1])) {
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index ffdb3a0..5571148 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -269,17 +269,18 @@
static void w83781d_init_client(struct i2c_client *client);
static struct i2c_driver w83781d_driver = {
- .owner = THIS_MODULE,
- .name = "w83781d",
+ .driver = {
+ .name = "w83781d",
+ },
.id = I2C_DRIVERID_W83781D,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = w83781d_attach_adapter,
.detach_client = w83781d_detach_client,
};
static struct i2c_driver w83781d_isa_driver = {
- .owner = THIS_MODULE,
- .name = "w83781d-isa",
+ .driver = {
+ .name = "w83781d-isa",
+ },
.attach_adapter = w83781d_isa_attach_adapter,
.detach_client = w83781d_detach_client,
};
@@ -1012,7 +1013,7 @@
if (is_isa)
if (!request_region(address, W83781D_EXTENT,
- w83781d_isa_driver.name)) {
+ w83781d_isa_driver.driver.name)) {
dev_dbg(&adapter->dev, "Request of region "
"0x%x-0x%x for w83781d failed\n", address,
address + W83781D_EXTENT - 1);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 1ba0726..b176bf0 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -269,7 +269,6 @@
struct w83792d_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
enum chips type;
struct semaphore update_lock;
@@ -282,7 +281,7 @@
u8 in[9]; /* Register value */
u8 in_max[9]; /* Register value */
u8 in_min[9]; /* Register value */
- u8 low_bits[2]; /* Additional resolution to voltage in0-6 */
+ u16 low_bits; /* Additional resolution to voltage in6-0 */
u8 fan[7]; /* Register value */
u8 fan_min[7]; /* Register value */
u8 temp1[3]; /* current, over, thyst */
@@ -317,45 +316,17 @@
static void w83792d_init_client(struct i2c_client *client);
static struct i2c_driver w83792d_driver = {
- .owner = THIS_MODULE,
- .name = "w83792d",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "w83792d",
+ },
.attach_adapter = w83792d_attach_adapter,
.detach_client = w83792d_detach_client,
};
-static long in_count_from_reg(int nr, struct w83792d_data *data)
+static inline long in_count_from_reg(int nr, struct w83792d_data *data)
{
- u16 vol_count = data->in[nr];
- u16 low_bits = 0;
- vol_count = (vol_count << 2);
- switch (nr)
- {
- case 0: /* vin0 */
- low_bits = (data->low_bits[0]) & 0x03;
- break;
- case 1: /* vin1 */
- low_bits = ((data->low_bits[0]) & 0x0c) >> 2;
- break;
- case 2: /* vin2 */
- low_bits = ((data->low_bits[0]) & 0x30) >> 4;
- break;
- case 3: /* vin3 */
- low_bits = ((data->low_bits[0]) & 0xc0) >> 6;
- break;
- case 4: /* vin4 */
- low_bits = (data->low_bits[1]) & 0x03;
- break;
- case 5: /* vin5 */
- low_bits = ((data->low_bits[1]) & 0x0c) >> 2;
- break;
- case 6: /* vin6 */
- low_bits = ((data->low_bits[1]) & 0x30) >> 4;
- default:
- break;
- }
- vol_count = vol_count | low_bits;
- return vol_count;
+ /* in7 and in8 do not have low bits, but the formula still works */
+ return ((data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03));
}
/* following are the sysfs callback functions */
@@ -1192,7 +1163,6 @@
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
- init_MUTEX(&data->lock);
new_client->adapter = adapter;
new_client->driver = &w83792d_driver;
new_client->flags = 0;
@@ -1243,7 +1213,7 @@
goto ERROR1;
}
val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID);
- if (val1 == 0x7a && address >= 0x2c) {
+ if (val1 == 0x7a) {
kind = w83792d;
} else {
if (kind == 0)
@@ -1416,26 +1386,17 @@
return 0;
}
-/* The SMBus locks itself, usually, but nothing may access the Winbond between
- bank switches. ISA access must always be locked explicitly!
- We ignore the W83792D BUSY flag at this moment - it could lead to deadlocks,
- would slow down the W83792D access and should not be necessary.
- There are some ugly typecasts here, but the good news is - they should
- nowhere else be necessary! */
-static int
-w83792d_read_value(struct i2c_client *client, u8 reg)
+/* The SMBus locks itself. The Winbond W83792D chip has a bank register,
+ but the driver only accesses registers in bank 0, so we don't have
+ to switch banks and lock access between switches. */
+static int w83792d_read_value(struct i2c_client *client, u8 reg)
{
- int res=0;
- res = i2c_smbus_read_byte_data(client, reg);
-
- return res;
+ return i2c_smbus_read_byte_data(client, reg);
}
-static int
-w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
+static int w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
{
- i2c_smbus_write_byte_data(client, reg, value);
- return 0;
+ return i2c_smbus_write_byte_data(client, reg, value);
}
static void
@@ -1492,10 +1453,10 @@
data->in_min[i] = w83792d_read_value(client,
W83792D_REG_IN_MIN[i]);
}
- data->low_bits[0] = w83792d_read_value(client,
- W83792D_REG_LOW_BITS1);
- data->low_bits[1] = w83792d_read_value(client,
- W83792D_REG_LOW_BITS2);
+ data->low_bits = w83792d_read_value(client,
+ W83792D_REG_LOW_BITS1) +
+ (w83792d_read_value(client,
+ W83792D_REG_LOW_BITS2) << 8);
for (i = 0; i < 7; i++) {
/* Update the Fan measured value and limits */
data->fan[i] = w83792d_read_value(client,
@@ -1506,7 +1467,7 @@
pwm_array_tmp[i] = w83792d_read_value(client,
W83792D_REG_PWM[i]);
data->pwm[i] = pwm_array_tmp[i] & 0x0f;
- data->pwm_mode[i] = (pwm_array_tmp[i] >> 7) & 0x01;
+ data->pwm_mode[i] = pwm_array_tmp[i] >> 7;
}
reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
@@ -1607,8 +1568,8 @@
dev_dbg(dev, "vin[%d] max is: 0x%x\n", i, data->in_max[i]);
dev_dbg(dev, "vin[%d] min is: 0x%x\n", i, data->in_min[i]);
}
- dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits[0]);
- dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits[1]);
+ dev_dbg(dev, "Low Bit1 is: 0x%x\n", data->low_bits & 0xff);
+ dev_dbg(dev, "Low Bit2 is: 0x%x\n", data->low_bits >> 8);
dev_dbg(dev, "7 set of Fan Counts and Duty Cycles: =====>\n");
for (i=0; i<7; i++) {
dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index f495b63..f66c0cf 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -92,10 +92,10 @@
*/
static struct i2c_driver w83l785ts_driver = {
- .owner = THIS_MODULE,
- .name = "w83l785ts",
+ .driver = {
+ .name = "w83l785ts",
+ },
.id = I2C_DRIVERID_W83L785TS,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = w83l785ts_attach_adapter,
.detach_client = w83l785ts_detach_client,
};
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ac3eafa..1c752dd 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -468,8 +468,7 @@
return -1;
}
- if (hwpec)
- outb_p(1, SMBAUXCTL); /* enable hardware PEC */
+ outb_p(hwpec, SMBAUXCTL); /* enable/disable hardware PEC */
if(block)
ret = i801_block_transaction(data, read_write, size, hwpec);
@@ -478,9 +477,6 @@
ret = i801_transaction();
}
- if (hwpec)
- outb_p(0, SMBAUXCTL); /* disable hardware PEC */
-
if(block)
return ret;
if(ret)
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 1a58725..87fae93 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -725,6 +725,7 @@
strcpy(adap->name, "IBM IIC");
i2c_set_adapdata(adap, dev);
adap->id = I2C_HW_OCP;
+ adap->class = I2C_CLASS_HWMON;
adap->algo = &iic_algo;
adap->client_register = NULL;
adap->client_unregister = NULL;
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index 03672c9..9f2ffef 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -92,15 +92,13 @@
int res;
/* Add the driver to the list of i2c drivers in the driver core */
- driver->driver.name = driver->name;
- driver->driver.owner = driver->owner;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_isa_device_probe;
driver->driver.remove = i2c_isa_device_remove;
res = driver_register(&driver->driver);
if (res)
return res;
- dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->name);
+ dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->driver.name);
/* Now look for clients */
driver->attach_adapter(&isa_adapter);
@@ -124,14 +122,14 @@
if ((res = driver->detach_client(client))) {
dev_err(&isa_adapter.dev, "Failed, driver "
"%s not unregistered!\n",
- driver->name);
+ driver->driver.name);
return res;
}
}
/* Get the driver off the core list */
driver_unregister(&driver->driver);
- dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->name);
+ dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->driver.name);
return 0;
}
@@ -176,7 +174,7 @@
list_for_each_safe(item, _n, &isa_adapter.clients) {
client = list_entry(item, struct i2c_client, list);
dev_err(&isa_adapter.dev, "Driver %s still has an active "
- "ISA client at 0x%x\n", client->driver->name,
+ "ISA client at 0x%x\n", client->driver->driver.name,
client->addr);
}
if (client != NULL)
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 81031eb..22781d8 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -1,6 +1,4 @@
/*
- * drivers/i2c/busses/i2c-mv64xxx.c
- *
* Driver for the i2c controller on the Marvell line of host bridges for MIPS
* and PPC (e.g, gt642[46]0, mv643[46]0, mv644[46]0).
*
@@ -65,7 +63,6 @@
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK,
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA,
- MV64XXX_I2C_STATE_ABORTING,
};
/* Driver actions */
@@ -85,6 +82,7 @@
int irq;
u32 state;
u32 action;
+ u32 aborting;
u32 cntl_bits;
void __iomem *reg_base;
u32 reg_base_p;
@@ -122,12 +120,6 @@
return;
}
- if (drv_data->state == MV64XXX_I2C_STATE_ABORTING) {
- drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
- drv_data->state = MV64XXX_I2C_STATE_IDLE;
- return;
- }
-
/* The status from the ctlr [mostly] tells us what to do next */
switch (status) {
/* Start condition interrupt */
@@ -148,14 +140,16 @@
/* FALLTHRU */
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
- if (drv_data->bytes_left > 0) {
+ if ((drv_data->bytes_left == 0)
+ || (drv_data->aborting
+ && (drv_data->byte_posn != 0))) {
+ drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
+ drv_data->state = MV64XXX_I2C_STATE_IDLE;
+ } else {
drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
drv_data->state =
MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
drv_data->bytes_left--;
- } else {
- drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
- drv_data->state = MV64XXX_I2C_STATE_IDLE;
}
break;
@@ -184,7 +178,7 @@
}
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
- if (drv_data->bytes_left == 1)
+ if ((drv_data->bytes_left == 1) || drv_data->aborting)
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK;
break;
@@ -320,6 +314,7 @@
drv_data->msg = msg;
drv_data->byte_posn = 0;
drv_data->bytes_left = msg->len;
+ drv_data->aborting = 0;
drv_data->rc = 0;
drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
@@ -359,17 +354,19 @@
}
if (abort && drv_data->block) {
- drv_data->state = MV64XXX_I2C_STATE_ABORTING;
+ drv_data->aborting = 1;
spin_unlock_irqrestore(&drv_data->lock, flags);
time_left = wait_event_timeout(drv_data->waitq,
!drv_data->block,
msecs_to_jiffies(drv_data->adapter.timeout));
- if (time_left <= 0) {
+ if ((time_left <= 0) && drv_data->block) {
drv_data->state = MV64XXX_I2C_STATE_IDLE;
dev_err(&drv_data->adapter.dev,
- "mv64xxx: I2C bus locked\n");
+ "mv64xxx: I2C bus locked, block: %d, "
+ "time_left: %d\n", drv_data->block,
+ (int)time_left);
}
} else
spin_unlock_irqrestore(&drv_data->lock, flags);
@@ -510,7 +507,7 @@
goto exit_kfree;
}
- strncpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
+ strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
I2C_NAME_SIZE);
init_waitqueue_head(&drv_data->waitq);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 4d18e6e5..2d80eb2 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -30,6 +30,7 @@
nForce3 Pro150 MCP 00D4
nForce3 250Gb MCP 00E4
nForce4 MCP 0052
+ nForce4 MCP-04 0034
This driver supports the 2 SMBuses that are included in the MCP of the
nForce2/3/4 chipsets.
@@ -257,6 +258,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS) },
{ 0 }
};
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index f63a537..d702e5e 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -80,6 +80,14 @@
.setscl = { 0x01, DATA, 1 },
.getsda = { 0x10, STAT, 1 },
},
+ /* type 6: Barco LPT->DVI (K5800236) adapter */
+ {
+ .setsda = { 0x02, DATA, 1 },
+ .setscl = { 0x01, DATA, 1 },
+ .getsda = { 0x20, STAT, 0 },
+ .getscl = { 0x40, STAT, 0 },
+ .init = { 0xfc, DATA, 0 },
+ },
};
static int type;
@@ -91,4 +99,6 @@
" 2 = Velleman K8000 adapter\n"
" 3 = ELV adapter\n"
" 4 = ADM1032 evaluation board\n"
- " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n");
+ " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"
+ " 6 = Barco LPT->DVI (K5800236) adapter\n"
+);
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 02682fb..93d483b 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -52,9 +52,9 @@
* Driver data (common to all clients)
*/
static struct i2c_driver ds1337_driver = {
- .owner = THIS_MODULE,
- .name = "ds1337",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "ds1337",
+ },
.attach_adapter = ds1337_attach_adapter,
.detach_client = ds1337_detach_client,
.command = ds1337_command,
@@ -337,13 +337,38 @@
static void ds1337_init_client(struct i2c_client *client)
{
- s32 val;
+ u8 status, control;
- /* Ensure that device is set in 24-hour mode */
- val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
- if ((val >= 0) && (val & (1 << 6)))
- i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
- val & 0x3f);
+ /* On some boards, the RTC isn't configured by boot firmware.
+ * Handle that case by starting/configuring the RTC now.
+ */
+ status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
+ control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
+
+ if ((status & 0x80) || (control & 0x80)) {
+ /* RTC not running */
+ u8 buf[16];
+ struct i2c_msg msg[1];
+
+ dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__);
+
+ /* Initialize all, including STATUS and CONTROL to zero */
+ memset(buf, 0, sizeof(buf));
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].len = sizeof(buf);
+ msg[0].buf = &buf[0];
+
+ i2c_transfer(client->adapter, msg, 1);
+ } else {
+ /* Running: ensure that device is set in 24-hour mode */
+ s32 val;
+
+ val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
+ if ((val >= 0) && (val & (1 << 6)))
+ i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
+ val & 0x3f);
+ }
}
static int ds1337_detach_client(struct i2c_client *client)
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index da488b7..0710b9d 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -232,10 +232,10 @@
}
static struct i2c_driver ds1374_driver = {
- .owner = THIS_MODULE,
- .name = DS1374_DRV_NAME,
+ .driver = {
+ .name = DS1374_DRV_NAME,
+ },
.id = I2C_DRIVERID_DS1374,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = ds1374_attach,
.detach_client = ds1374_detach,
};
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 4baf573..41116b7 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -68,10 +68,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver eeprom_driver = {
- .owner = THIS_MODULE,
- .name = "eeprom",
+ .driver = {
+ .name = "eeprom",
+ },
.id = I2C_DRIVERID_EEPROM,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = eeprom_attach_adapter,
.detach_client = eeprom_detach_client,
};
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index d2a100d..1251c7f 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -1632,11 +1632,11 @@
}
static struct i2c_driver isp1301_driver = {
- .owner = THIS_MODULE,
- .name = "isp1301_omap",
+ .driver = {
+ .name = "isp1301_omap",
+ },
.id = 1301, /* FIXME "official", i2c-ids.h */
.class = I2C_CLASS_HWMON,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = isp1301_scan_bus,
.detach_client = isp1301_detach_client,
};
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 3df309a..2dc3d48 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -211,10 +211,10 @@
}
static struct i2c_driver m41t00_driver = {
- .owner = THIS_MODULE,
- .name = M41T00_DRV_NAME,
+ .driver = {
+ .name = M41T00_DRV_NAME,
+ },
.id = I2C_DRIVERID_STM41T00,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = m41t00_attach,
.detach_client = m41t00_detach,
};
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index b376a00..6d3ff58 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -67,9 +67,9 @@
/* This is the driver that will be inserted */
static struct i2c_driver max6875_driver = {
- .owner = THIS_MODULE,
- .name = "max6875",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "max6875",
+ },
.attach_adapter = max6875_attach_adapter,
.detach_client = max6875_detach_client,
};
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 59a9303..54b6e6a 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -38,9 +38,9 @@
/* This is the driver that will be inserted */
static struct i2c_driver pca9539_driver = {
- .owner = THIS_MODULE,
- .name = "pca9539",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "pca9539",
+ },
.attach_adapter = pca9539_attach_adapter,
.detach_client = pca9539_detach_client,
};
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index c323c2d..c3e6449 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -65,10 +65,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver pcf8574_driver = {
- .owner = THIS_MODULE,
- .name = "pcf8574",
+ .driver = {
+ .name = "pcf8574",
+ },
.id = I2C_DRIVERID_PCF8574,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = pcf8574_attach_adapter,
.detach_client = pcf8574_detach_client,
};
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index ce420a6..36cff09 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -88,10 +88,10 @@
/* This is the driver that will be inserted */
static struct i2c_driver pcf8591_driver = {
- .owner = THIS_MODULE,
- .name = "pcf8591",
+ .driver = {
+ .name = "pcf8591",
+ },
.id = I2C_DRIVERID_PCF8591,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = pcf8591_attach_adapter,
.detach_client = pcf8591_detach_client,
};
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
index 916cdc1..ceaa6b0 100644
--- a/drivers/i2c/chips/rtc8564.c
+++ b/drivers/i2c/chips/rtc8564.c
@@ -14,6 +14,7 @@
*/
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/bcd.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/string.h>
@@ -52,9 +53,6 @@
#define CTRL1(c) _rtc8564_ctrl1(c)
#define CTRL2(c) _rtc8564_ctrl2(c)
-#define BCD_TO_BIN(val) (((val)&15) + ((val)>>4)*10)
-#define BIN_TO_BCD(val) ((((val)/10)<<4) + (val)%10)
-
static int debug;;
module_param(debug, int, S_IRUGO | S_IWUSR);
@@ -157,7 +155,6 @@
strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
i2c_set_clientdata(new_client, d);
- new_client->flags = I2C_CLIENT_ALLOW_USE;
new_client->addr = addr;
new_client->adapter = adap;
new_client->driver = &rtc8564_driver;
@@ -224,16 +221,16 @@
return ret;
/* century stored in minute alarm reg */
- dt->year = BCD_TO_BIN(buf[RTC8564_REG_YEAR]);
- dt->year += 100 * BCD_TO_BIN(buf[RTC8564_REG_AL_MIN] & 0x3f);
- dt->mday = BCD_TO_BIN(buf[RTC8564_REG_DAY] & 0x3f);
- dt->wday = BCD_TO_BIN(buf[RTC8564_REG_WDAY] & 7);
- dt->mon = BCD_TO_BIN(buf[RTC8564_REG_MON_CENT] & 0x1f);
+ dt->year = BCD2BIN(buf[RTC8564_REG_YEAR]);
+ dt->year += 100 * BCD2BIN(buf[RTC8564_REG_AL_MIN] & 0x3f);
+ dt->mday = BCD2BIN(buf[RTC8564_REG_DAY] & 0x3f);
+ dt->wday = BCD2BIN(buf[RTC8564_REG_WDAY] & 7);
+ dt->mon = BCD2BIN(buf[RTC8564_REG_MON_CENT] & 0x1f);
- dt->secs = BCD_TO_BIN(buf[RTC8564_REG_SEC] & 0x7f);
+ dt->secs = BCD2BIN(buf[RTC8564_REG_SEC] & 0x7f);
dt->vl = (buf[RTC8564_REG_SEC] & 0x80) == 0x80;
- dt->mins = BCD_TO_BIN(buf[RTC8564_REG_MIN] & 0x7f);
- dt->hours = BCD_TO_BIN(buf[RTC8564_REG_HR] & 0x3f);
+ dt->mins = BCD2BIN(buf[RTC8564_REG_MIN] & 0x7f);
+ dt->hours = BCD2BIN(buf[RTC8564_REG_HR] & 0x3f);
_DBGRTCTM(2, *dt);
@@ -255,18 +252,18 @@
buf[RTC8564_REG_CTRL1] = CTRL1(client) | RTC8564_CTRL1_STOP;
buf[RTC8564_REG_CTRL2] = CTRL2(client);
- buf[RTC8564_REG_SEC] = BIN_TO_BCD(dt->secs);
- buf[RTC8564_REG_MIN] = BIN_TO_BCD(dt->mins);
- buf[RTC8564_REG_HR] = BIN_TO_BCD(dt->hours);
+ buf[RTC8564_REG_SEC] = BIN2BCD(dt->secs);
+ buf[RTC8564_REG_MIN] = BIN2BCD(dt->mins);
+ buf[RTC8564_REG_HR] = BIN2BCD(dt->hours);
if (datetoo) {
len += 5;
- buf[RTC8564_REG_DAY] = BIN_TO_BCD(dt->mday);
- buf[RTC8564_REG_WDAY] = BIN_TO_BCD(dt->wday);
- buf[RTC8564_REG_MON_CENT] = BIN_TO_BCD(dt->mon) & 0x1f;
+ buf[RTC8564_REG_DAY] = BIN2BCD(dt->mday);
+ buf[RTC8564_REG_WDAY] = BIN2BCD(dt->wday);
+ buf[RTC8564_REG_MON_CENT] = BIN2BCD(dt->mon) & 0x1f;
/* century stored in minute alarm reg */
- buf[RTC8564_REG_YEAR] = BIN_TO_BCD(dt->year % 100);
- buf[RTC8564_REG_AL_MIN] = BIN_TO_BCD(dt->year / 100);
+ buf[RTC8564_REG_YEAR] = BIN2BCD(dt->year % 100);
+ buf[RTC8564_REG_AL_MIN] = BIN2BCD(dt->year / 100);
}
ret = rtc8564_write(client, 0, buf, len);
@@ -361,10 +358,10 @@
}
static struct i2c_driver rtc8564_driver = {
- .owner = THIS_MODULE,
- .name = "RTC8564",
+ .driver = {
+ .name = "RTC8564",
+ },
.id = I2C_DRIVERID_RTC8564,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = rtc8564_probe,
.detach_client = rtc8564_detach,
.command = rtc8564_command
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 280dd7a..e70b3db 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -637,9 +637,9 @@
}
static struct i2c_driver tps65010_driver = {
- .owner = THIS_MODULE,
- .name = "tps65010",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "tps65010",
+ },
.attach_adapter = tps65010_scan_bus,
.detach_client = __exit_p(tps65010_detach_client),
};
diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c
index 7da366c..245fffa 100644
--- a/drivers/i2c/chips/x1205.c
+++ b/drivers/i2c/chips/x1205.c
@@ -105,9 +105,9 @@
void *arg);
static struct i2c_driver x1205_driver = {
- .owner = THIS_MODULE,
- .name = "x1205",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "x1205",
+ },
.attach_adapter = &x1205_attach,
.detach_client = &x1205_detach,
};
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 82ea1b7..52b7747 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -197,7 +197,7 @@
/* inform drivers of new adapters */
list_for_each(item,&drivers) {
driver = list_entry(item, struct i2c_driver, list);
- if (driver->flags & I2C_DF_NOTIFY)
+ if (driver->attach_adapter)
/* We ignore the return code; if it fails, too bad */
driver->attach_adapter(adap);
}
@@ -235,7 +235,8 @@
if (driver->detach_adapter)
if ((res = driver->detach_adapter(adap))) {
dev_err(&adap->dev, "detach_adapter failed "
- "for driver [%s]\n", driver->name);
+ "for driver [%s]\n",
+ driver->driver.name);
goto out_unlock;
}
}
@@ -245,10 +246,6 @@
list_for_each_safe(item, _n, &adap->clients) {
client = list_entry(item, struct i2c_client, list);
- /* detaching devices is unconditional of the set notify
- * flag, as _all_ clients that reside on the adapter
- * must be deleted, as this would cause invalid states.
- */
if ((res=client->driver->detach_client(client))) {
dev_err(&adap->dev, "detach_client failed for client "
"[%s] at address 0x%02x\n", client->name,
@@ -286,7 +283,7 @@
* chips.
*/
-int i2c_add_driver(struct i2c_driver *driver)
+int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
{
struct list_head *item;
struct i2c_adapter *adapter;
@@ -295,8 +292,7 @@
down(&core_lists);
/* add the driver to the list of i2c drivers in the driver core */
- driver->driver.owner = driver->owner;
- driver->driver.name = driver->name;
+ driver->driver.owner = owner;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_device_probe;
driver->driver.remove = i2c_device_remove;
@@ -306,10 +302,10 @@
goto out_unlock;
list_add_tail(&driver->list,&drivers);
- pr_debug("i2c-core: driver [%s] registered\n", driver->name);
+ pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
/* now look for instances of driver on our adapters */
- if (driver->flags & I2C_DF_NOTIFY) {
+ if (driver->attach_adapter) {
list_for_each(item,&adapters) {
adapter = list_entry(item, struct i2c_adapter, list);
driver->attach_adapter(adapter);
@@ -320,6 +316,7 @@
up(&core_lists);
return res;
}
+EXPORT_SYMBOL(i2c_register_driver);
int i2c_del_driver(struct i2c_driver *driver)
{
@@ -334,17 +331,14 @@
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
* afterwards.
- *
- * Removing clients does not depend on the notify flag, else
- * invalid operation might (will!) result, when using stale client
- * pointers.
*/
list_for_each(item1,&adapters) {
adap = list_entry(item1, struct i2c_adapter, list);
if (driver->detach_adapter) {
if ((res = driver->detach_adapter(adap))) {
dev_err(&adap->dev, "detach_adapter failed "
- "for driver [%s]\n", driver->name);
+ "for driver [%s]\n",
+ driver->driver.name);
goto out_unlock;
}
} else {
@@ -368,7 +362,7 @@
driver_unregister(&driver->driver);
list_del(&driver->list);
- pr_debug("i2c-core: driver [%s] unregistered\n", driver->name);
+ pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
out_unlock:
up(&core_lists);
@@ -419,8 +413,7 @@
}
}
- if (client->flags & I2C_CLIENT_ALLOW_USE)
- client->usage_count = 0;
+ client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
client->dev.driver = &client->driver->driver;
@@ -443,8 +436,7 @@
struct i2c_adapter *adapter = client->adapter;
int res = 0;
- if ((client->flags & I2C_CLIENT_ALLOW_USE)
- && (client->usage_count > 0)) {
+ if (client->usage_count > 0) {
dev_warn(&client->dev, "Client [%s] still busy, "
"can't detach\n", client->name);
return -EBUSY;
@@ -475,10 +467,10 @@
static int i2c_inc_use_client(struct i2c_client *client)
{
- if (!try_module_get(client->driver->owner))
+ if (!try_module_get(client->driver->driver.owner))
return -ENODEV;
if (!try_module_get(client->adapter->owner)) {
- module_put(client->driver->owner);
+ module_put(client->driver->driver.owner);
return -ENODEV;
}
@@ -487,7 +479,7 @@
static void i2c_dec_use_client(struct i2c_client *client)
{
- module_put(client->driver->owner);
+ module_put(client->driver->driver.owner);
module_put(client->adapter->owner);
}
@@ -499,33 +491,20 @@
if (ret)
return ret;
- if (client->flags & I2C_CLIENT_ALLOW_USE) {
- if (client->flags & I2C_CLIENT_ALLOW_MULTIPLE_USE)
- client->usage_count++;
- else if (client->usage_count > 0)
- goto busy;
- else
- client->usage_count++;
- }
+ client->usage_count++;
return 0;
- busy:
- i2c_dec_use_client(client);
- return -EBUSY;
}
int i2c_release_client(struct i2c_client *client)
{
- if(client->flags & I2C_CLIENT_ALLOW_USE) {
- if(client->usage_count>0)
- client->usage_count--;
- else {
- pr_debug("i2c-core: %s used one too many times\n",
- __FUNCTION__);
- return -EPERM;
- }
+ if (!client->usage_count) {
+ pr_debug("i2c-core: %s used one too many times\n",
+ __FUNCTION__);
+ return -EPERM;
}
+ client->usage_count--;
i2c_dec_use_client(client);
return 0;
@@ -539,14 +518,14 @@
down(&adap->clist_lock);
list_for_each(item,&adap->clients) {
client = list_entry(item, struct i2c_client, list);
- if (!try_module_get(client->driver->owner))
+ if (!try_module_get(client->driver->driver.owner))
continue;
if (NULL != client->driver->command) {
up(&adap->clist_lock);
client->driver->command(client,cmd,arg);
down(&adap->clist_lock);
}
- module_put(client->driver->owner);
+ module_put(client->driver->driver.owner);
}
up(&adap->clist_lock);
}
@@ -1147,7 +1126,6 @@
EXPORT_SYMBOL(i2c_add_adapter);
EXPORT_SYMBOL(i2c_del_adapter);
-EXPORT_SYMBOL(i2c_add_driver);
EXPORT_SYMBOL(i2c_del_driver);
EXPORT_SYMBOL(i2c_attach_client);
EXPORT_SYMBOL(i2c_detach_client);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 8af0bd1..ed7eed3 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -42,8 +42,7 @@
struct i2c_dev {
int minor;
struct i2c_adapter *adap;
- struct class_device class_dev;
- struct completion released; /* FIXME, we need a class_device_unregister() */
+ struct class_device *class_dev;
};
#define to_i2c_dev(d) container_of(d, struct i2c_dev, class_dev)
@@ -105,7 +104,10 @@
static ssize_t show_adapter_name(struct class_device *class_dev, char *buf)
{
- struct i2c_dev *i2c_dev = to_i2c_dev(class_dev);
+ struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(class_dev->devt));
+
+ if (!i2c_dev)
+ return -ENODEV;
return sprintf(buf, "%s\n", i2c_dev->adap->name);
}
static CLASS_DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
@@ -408,21 +410,12 @@
.release = i2cdev_release,
};
-static void release_i2c_dev(struct class_device *dev)
-{
- struct i2c_dev *i2c_dev = to_i2c_dev(dev);
- complete(&i2c_dev->released);
-}
-
-static struct class i2c_dev_class = {
- .name = "i2c-dev",
- .release = &release_i2c_dev,
-};
+static struct class *i2c_dev_class;
static int i2cdev_attach_adapter(struct i2c_adapter *adap)
{
struct i2c_dev *i2c_dev;
- int retval;
+ struct device *dev;
i2c_dev = get_free_i2c_dev(adap);
if (IS_ERR(i2c_dev))
@@ -434,21 +427,20 @@
/* register this i2c device with the driver core */
i2c_dev->adap = adap;
if (adap->dev.parent == &platform_bus)
- i2c_dev->class_dev.dev = &adap->dev;
+ dev = &adap->dev;
else
- i2c_dev->class_dev.dev = adap->dev.parent;
- i2c_dev->class_dev.class = &i2c_dev_class;
- i2c_dev->class_dev.devt = MKDEV(I2C_MAJOR, i2c_dev->minor);
- snprintf(i2c_dev->class_dev.class_id, BUS_ID_SIZE, "i2c-%d", i2c_dev->minor);
- retval = class_device_register(&i2c_dev->class_dev);
- if (retval)
+ dev = adap->dev.parent;
+ i2c_dev->class_dev = class_device_create(i2c_dev_class, NULL,
+ MKDEV(I2C_MAJOR, i2c_dev->minor),
+ dev, "i2c-%d", i2c_dev->minor);
+ if (!i2c_dev->class_dev)
goto error;
- class_device_create_file(&i2c_dev->class_dev, &class_device_attr_name);
+ class_device_create_file(i2c_dev->class_dev, &class_device_attr_name);
return 0;
error:
return_i2c_dev(i2c_dev);
kfree(i2c_dev);
- return retval;
+ return -ENODEV;
}
static int i2cdev_detach_adapter(struct i2c_adapter *adap)
@@ -459,10 +451,8 @@
if (!i2c_dev)
return -ENODEV;
- init_completion(&i2c_dev->released);
return_i2c_dev(i2c_dev);
- class_device_unregister(&i2c_dev->class_dev);
- wait_for_completion(&i2c_dev->released);
+ class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, i2c_dev->minor));
kfree(i2c_dev);
pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
@@ -474,21 +464,14 @@
return 0;
}
-static int i2cdev_command(struct i2c_client *client, unsigned int cmd,
- void *arg)
-{
- return -1;
-}
-
static struct i2c_driver i2cdev_driver = {
- .owner = THIS_MODULE,
- .name = "dev_driver",
+ .driver = {
+ .name = "dev_driver",
+ },
.id = I2C_DRIVERID_I2CDEV,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = i2cdev_attach_adapter,
.detach_adapter = i2cdev_detach_adapter,
.detach_client = i2cdev_detach_client,
- .command = i2cdev_command,
};
static struct i2c_client i2cdev_client_template = {
@@ -507,8 +490,8 @@
if (res)
goto out;
- res = class_register(&i2c_dev_class);
- if (res)
+ i2c_dev_class = class_create(THIS_MODULE, "i2c-dev");
+ if (IS_ERR(i2c_dev_class))
goto out_unreg_chrdev;
res = i2c_add_driver(&i2cdev_driver);
@@ -518,7 +501,7 @@
return 0;
out_unreg_class:
- class_unregister(&i2c_dev_class);
+ class_destroy(i2c_dev_class);
out_unreg_chrdev:
unregister_chrdev(I2C_MAJOR, "i2c");
out:
@@ -529,7 +512,7 @@
static void __exit i2c_dev_exit(void)
{
i2c_del_driver(&i2cdev_driver);
- class_unregister(&i2c_dev_class);
+ class_destroy(i2c_dev_class);
unregister_chrdev(I2C_MAJOR,"i2c");
}
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 5e1f5e9..5ebfd1d 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -176,9 +176,9 @@
}
static struct i2c_driver thermostat_driver = {
- .owner = THIS_MODULE,
- .name = "therm_adt746x",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "therm_adt746x",
+ },
.attach_adapter = attach_thermostat,
.detach_adapter = detach_thermostat,
};
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 435427d..8d0958c 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -283,9 +283,9 @@
static struct i2c_driver therm_pm72_driver =
{
- .owner = THIS_MODULE,
- .name = "therm_pm72",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "therm_pm72",
+ },
.attach_adapter = therm_pm72_attach,
.detach_adapter = therm_pm72_detach,
};
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 6aaa1df..3d9dd2e 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -354,10 +354,10 @@
}
static struct i2c_driver g4fan_driver = {
- .owner = THIS_MODULE,
- .name = "therm_windtunnel",
+ .driver = {
+ .name = "therm_windtunnel",
+ },
.id = I2C_DRIVERID_G4FAN,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = do_attach,
.detach_client = do_detach,
};
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index c62ed68..57460e4 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -47,9 +47,9 @@
static int wf_lm75_detach(struct i2c_client *client);
static struct i2c_driver wf_lm75_driver = {
- .owner = THIS_MODULE,
- .name = "wf_lm75",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "wf_lm75",
+ },
.attach_adapter = wf_lm75_attach,
.detach_client = wf_lm75_detach,
};
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index 1ca2b67..e61003d 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -420,7 +420,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_adv7170;
- client->flags = I2C_CLIENT_ALLOW_USE;
if ((client->addr == I2C_ADV7170 >> 1) ||
(client->addr == (I2C_ADV7170 >> 1) + 1)) {
dname = adv7170_name;
@@ -498,11 +497,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_adv7170 = {
- .owner = THIS_MODULE,
- .name = "adv7170", /* name */
+ .driver = {
+ .name = "adv7170", /* name */
+ },
.id = I2C_DRIVERID_ADV7170,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adv7170_attach_adapter,
.detach_client = adv7170_detach_client,
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index 173bca1..6d9536a 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -470,7 +470,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_adv7175;
- client->flags = I2C_CLIENT_ALLOW_USE;
if ((client->addr == I2C_ADV7175 >> 1) ||
(client->addr == (I2C_ADV7175 >> 1) + 1)) {
dname = adv7175_name;
@@ -548,11 +547,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_adv7175 = {
- .owner = THIS_MODULE,
- .name = "adv7175", /* name */
+ .driver = {
+ .name = "adv7175", /* name */
+ },
.id = I2C_DRIVERID_ADV7175,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = adv7175_attach_adapter,
.detach_client = adv7175_detach_client,
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index 3ee0afc..560b998 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -535,7 +535,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_bt819;
- client->flags = I2C_CLIENT_ALLOW_USE;
decoder = kmalloc(sizeof(struct bt819), GFP_KERNEL);
if (decoder == NULL) {
@@ -623,11 +622,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_bt819 = {
- .owner = THIS_MODULE,
- .name = "bt819",
+ .driver = {
+ .name = "bt819",
+ },
.id = I2C_DRIVERID_BT819,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = bt819_attach_adapter,
.detach_client = bt819_detach_client,
diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt832.c
index 3ca1d76..1c3ff5f 100644
--- a/drivers/media/video/bt832.c
+++ b/drivers/media/video/bt832.c
@@ -230,10 +230,10 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "i2c bt832 driver",
+ .driver = {
+ .name = "i2c bt832 driver",
+ },
.id = -1, /* FIXME */
- .flags = I2C_DF_NOTIFY,
.attach_adapter = bt832_probe,
.detach_client = bt832_detach,
.command = bt832_command,
@@ -241,7 +241,6 @@
static struct i2c_client client_template =
{
.name = "bt832",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index 8eb871d..6050806 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -323,7 +323,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_bt856;
- client->flags = I2C_CLIENT_ALLOW_USE;
strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client)));
encoder = kmalloc(sizeof(struct bt856), GFP_KERNEL);
@@ -405,11 +404,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_bt856 = {
- .owner = THIS_MODULE,
- .name = "bt856",
+ .driver = {
+ .name = "bt856",
+ },
.id = I2C_DRIVERID_BT856,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = bt856_attach_adapter,
.detach_client = bt856_detach_client,
diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c
index 77619eb..d6418c0 100644
--- a/drivers/media/video/bttv-i2c.c
+++ b/drivers/media/video/bttv-i2c.c
@@ -300,7 +300,7 @@
if (bttv_debug)
printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n",
- btv->c.nr,client->driver->name,client->addr,
+ btv->c.nr, client->driver->driver.name, client->addr,
client->name);
if (!client->driver->command)
return 0;
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index 780b352..643ead1 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -42,15 +42,16 @@
#define cs53l32a_dbg(fmt, arg...) \
do { \
if (debug) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
#define cs53l32a_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define cs53l32a_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END };
@@ -154,7 +155,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver;
- client->flags = I2C_CLIENT_ALLOW_USE;
snprintf(client->name, sizeof(client->name) - 1, "cs53l32a");
cs53l32a_info("chip found @ 0x%x (%s)\n", address << 1, adapter->name);
@@ -216,13 +216,13 @@
/* i2c implementation */
static struct i2c_driver i2c_driver = {
- .name = "cs53l32a",
+ .driver = {
+ .name = "cs53l32a",
+ },
.id = I2C_DRIVERID_CS53L32A,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = cs53l32a_probe,
.detach_client = cs53l32a_detach,
.command = cs53l32a_command,
- .owner = THIS_MODULE,
};
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 5b93723..3b09f46 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -773,7 +773,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_cx25840;
- client->flags = I2C_CLIENT_ALLOW_USE;
snprintf(client->name, sizeof(client->name) - 1, "cx25840");
cx25840_dbg("detecting cx25840 client on address 0x%x\n", address << 1);
@@ -844,15 +843,15 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_cx25840 = {
- .name = "cx25840",
+ .driver = {
+ .name = "cx25840",
+ },
.id = I2C_DRIVERID_CX25840,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = cx25840_attach_adapter,
.detach_client = cx25840_detach_client,
.command = cx25840_command,
- .owner = THIS_MODULE,
};
diff --git a/drivers/media/video/cx25840/cx25840.h b/drivers/media/video/cx25840/cx25840.h
index 4932ed1..40aa59f 100644
--- a/drivers/media/video/cx25840/cx25840.h
+++ b/drivers/media/video/cx25840/cx25840.h
@@ -27,15 +27,16 @@
extern int cx25840_debug;
#define cx25840_dbg(fmt, arg...) do { if (cx25840_debug) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define cx25840_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define cx25840_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define CX25840_CID_CARDTYPE (V4L2_CID_PRIVATE_BASE+0)
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 9790d41..4a8fb16 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -94,7 +94,7 @@
struct cx88_core *core = i2c_get_adapdata(client->adapter);
dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
- client->driver->name, client->addr, client->name);
+ client->driver->driver.name, client->addr, client->name);
if (!client->driver->command)
return 0;
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 7f56030..d14bcf4 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -497,7 +497,6 @@
static struct i2c_client em28xx_client_template = {
.name = "em28xx internal",
- .flags = I2C_CLIENT_ALLOW_USE,
};
/* ----------------------------------------------------------- */
diff --git a/drivers/media/video/indycam.c b/drivers/media/video/indycam.c
index deeef12..bb5cbec 100644
--- a/drivers/media/video/indycam.c
+++ b/drivers/media/video/indycam.c
@@ -451,10 +451,10 @@
}
static struct i2c_driver i2c_driver_indycam = {
- .owner = THIS_MODULE,
- .name = "indycam",
+ .driver = {
+ .name = "indycam",
+ },
.id = I2C_DRIVERID_INDYCAM,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = indycam_probe,
.detach_client = indycam_detach,
.command = indycam_command,
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 740e543..3cc1d6a 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -278,9 +278,10 @@
static int ir_probe(struct i2c_adapter *adap);
static struct i2c_driver driver = {
- .name = "ir remote kbd driver",
+ .driver = {
+ .name = "ir remote kbd driver",
+ },
.id = I2C_DRIVERID_INFRARED,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = ir_probe,
.detach_client = ir_detach,
};
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
index d86f8e9..183253e 100644
--- a/drivers/media/video/msp3400.c
+++ b/drivers/media/video/msp3400.c
@@ -59,7 +59,8 @@
#define msp3400_dbg(fmt, arg...) \
do { \
if (debug) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
@@ -67,7 +68,8 @@
#define msp3400_dbg_mediumvol(fmt, arg...) \
do { \
if (debug >= 2) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
@@ -75,18 +77,19 @@
#define msp3400_dbg_highvol(fmt, arg...) \
do { \
if (debug >= 16) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
#define msp3400_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define msp3400_warn(fmt, arg...) do { \
- printk(KERN_WARNING "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_WARNING "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define msp3400_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define OPMODE_AUTO -1
@@ -1561,14 +1564,12 @@
static void msp_wake_thread(struct i2c_client *client);
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "msp3400",
.id = I2C_DRIVERID_MSP3400,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = msp_probe,
.detach_client = msp_detach,
.command = msp_command,
.driver = {
+ .name = "i2c msp3400 driver",
.suspend = msp_suspend,
.resume = msp_resume,
},
@@ -1577,7 +1578,6 @@
static struct i2c_client client_template =
{
.name = "(unset)",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
index 2de34eb..428f1bb 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -410,11 +410,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "ovcamchip",
+ .driver = {
+ .name = "ovcamchip",
+ },
.id = I2C_DRIVERID_OVCAMCHIP,
.class = I2C_CLASS_CAM_DIGITAL,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = ovcamchip_attach,
.detach_client = ovcamchip_detach,
.command = ovcamchip_command,
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index b8054da..0aa9e72 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -151,25 +151,18 @@
return 0;
}
-static int saa5246a_command(struct i2c_client *device, unsigned int cmd,
- void *arg)
-{
- return -EINVAL;
-}
-
/*
* I2C interfaces
*/
static struct i2c_driver i2c_driver_videotext =
{
- .owner = THIS_MODULE,
- .name = IF_NAME, /* name */
+ .driver = {
+ .name = IF_NAME, /* name */
+ },
.id = I2C_DRIVERID_SAA5249, /* in i2c.h */
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa5246a_probe,
.detach_client = saa5246a_detach,
- .command = saa5246a_command
};
static struct i2c_client client_template = {
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 7ffa2e9..a51c7bd 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -226,23 +226,16 @@
return 0;
}
-static int saa5249_command(struct i2c_client *device,
- unsigned int cmd, void *arg)
-{
- return -EINVAL;
-}
-
/* new I2C driver support */
static struct i2c_driver i2c_driver_videotext =
{
- .owner = THIS_MODULE,
- .name = IF_NAME, /* name */
+ .driver = {
+ .name = IF_NAME, /* name */
+ },
.id = I2C_DRIVERID_SAA5249, /* in i2c.h */
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa5249_probe,
.detach_client = saa5249_detach,
- .command = saa5249_command
};
static struct i2c_client client_template = {
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
index 9233225..d60a783 100644
--- a/drivers/media/video/saa6588.c
+++ b/drivers/media/video/saa6588.c
@@ -495,10 +495,10 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "i2c saa6588 driver",
+ .driver = {
+ .name = "i2c saa6588 driver",
+ },
.id = -1, /* FIXME */
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa6588_probe,
.detach_client = saa6588_detach,
.command = saa6588_command,
@@ -506,7 +506,6 @@
static struct i2c_client client_template = {
.name = "saa6588",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index e116bdb..619ff0b 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -501,7 +501,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7110;
- client->flags = I2C_CLIENT_ALLOW_USE;
strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client)));
decoder = kmalloc(sizeof(struct saa7110), GFP_KERNEL);
@@ -587,11 +586,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7110 = {
- .owner = THIS_MODULE,
- .name = "saa7110",
+ .driver = {
+ .name = "saa7110",
+ },
.id = I2C_DRIVERID_SAA7110,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7110_attach_adapter,
.detach_client = saa7110_detach_client,
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index fe8a5e4..acaeee5 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -518,7 +518,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7111;
- client->flags = I2C_CLIENT_ALLOW_USE;
strlcpy(I2C_NAME(client), "saa7111", sizeof(I2C_NAME(client)));
decoder = kmalloc(sizeof(struct saa7111), GFP_KERNEL);
@@ -590,11 +589,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7111 = {
- .owner = THIS_MODULE,
- .name = "saa7111",
+ .driver = {
+ .name = "saa7111",
+ },
.id = I2C_DRIVERID_SAA7111A,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7111_attach_adapter,
.detach_client = saa7111_detach_client,
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index d9f50e2..b7ac012 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -859,7 +859,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7114;
- client->flags = I2C_CLIENT_ALLOW_USE;
strlcpy(I2C_NAME(client), "saa7114", sizeof(I2C_NAME(client)));
decoder = kmalloc(sizeof(struct saa7114), GFP_KERNEL);
@@ -1204,11 +1203,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7114 = {
- .owner = THIS_MODULE,
- .name = "saa7114",
+ .driver = {
+ .name = "saa7114",
+ },
.id = I2C_DRIVERID_SAA7114,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7114_attach_adapter,
.detach_client = saa7114_detach_client,
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index e717e30..29e28c7 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -52,15 +52,16 @@
#define saa7115_dbg(fmt,arg...) \
do { \
if (debug) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
#define saa7115_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define saa7115_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END };
@@ -1270,7 +1271,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7115;
- client->flags = I2C_CLIENT_ALLOW_USE;
snprintf(client->name, sizeof(client->name) - 1, "saa7115");
saa7115_dbg("detecting saa7115 client on address 0x%x\n", address << 1);
@@ -1354,13 +1354,13 @@
/* i2c implementation */
static struct i2c_driver i2c_driver_saa7115 = {
- .name = "saa7115",
+ .driver = {
+ .name = "saa7115",
+ },
.id = I2C_DRIVERID_SAA711X,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7115_probe,
.detach_client = saa7115_detach,
.command = saa7115_command,
- .owner = THIS_MODULE,
};
diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c
index 31f7b95..8008537 100644
--- a/drivers/media/video/saa711x.c
+++ b/drivers/media/video/saa711x.c
@@ -494,7 +494,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa711x;
- client->flags = I2C_CLIENT_ALLOW_USE;
strlcpy(I2C_NAME(client), "saa711x", sizeof(I2C_NAME(client)));
decoder = kmalloc(sizeof(struct saa711x), GFP_KERNEL);
if (decoder == NULL) {
@@ -565,11 +564,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa711x = {
- .owner = THIS_MODULE,
- .name = "saa711x",
+ .driver = {
+ .name = "saa711x",
+ },
.id = I2C_DRIVERID_SAA711X,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa711x_attach_adapter,
.detach_client = saa711x_detach_client,
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index c36f014..bca6ed0 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -69,7 +69,8 @@
#define saa7127_dbg(fmt, arg...) \
do { \
if (debug >= 1) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
@@ -77,15 +78,16 @@
#define saa7127_dbg_highvol(fmt, arg...) \
do { \
if (debug == 2) \
- printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s debug %d-%04x: " fmt, \
+ client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); \
} while (0)
#define saa7127_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define saa7127_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
@@ -719,7 +721,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7127;
- client->flags = I2C_CLIENT_ALLOW_USE;
snprintf(client->name, sizeof(client->name) - 1, "saa7127");
saa7127_dbg("detecting saa7127 client on address 0x%x\n", address << 1);
@@ -819,13 +820,13 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7127 = {
- .name = "saa7127",
+ .driver = {
+ .name = "saa7127",
+ },
.id = I2C_DRIVERID_SAA7127,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7127_probe,
.detach_client = saa7127_detach,
.command = saa7127_command,
- .owner = THIS_MODULE,
};
diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c
index a61d24f..4615a98 100644
--- a/drivers/media/video/saa7134/saa6752hs.c
+++ b/drivers/media/video/saa7134/saa6752hs.c
@@ -597,10 +597,10 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "i2c saa6752hs MPEG encoder",
+ .driver = {
+ .name = "i2c saa6752hs MPEG encoder",
+ },
.id = I2C_DRIVERID_SAA6752HS,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa6752hs_probe,
.detach_client = saa6752hs_detach,
.command = saa6752hs_command,
@@ -609,7 +609,6 @@
static struct i2c_client client_template =
{
.name = "saa6752hs",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index df9dd36..1792d03 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -333,7 +333,7 @@
struct tuner_setup tun_setup;
d1printk( "%s i2c attach [addr=0x%x,client=%s]\n",
- client->driver->name, client->addr, client->name);
+ client->driver->driver.name, client->addr, client->name);
/* Am I an i2c remote control? */
@@ -343,7 +343,7 @@
{
struct IR_i2c *ir = i2c_get_clientdata(client);
d1printk("%s i2c IR detected (%s).\n",
- client->driver->name,ir->phys);
+ client->driver->driver.name, ir->phys);
saa7134_set_i2c_ir(dev,ir);
break;
}
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 132aa79..f72a9f7 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -415,7 +415,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7185;
- client->flags = I2C_CLIENT_ALLOW_USE;
strlcpy(I2C_NAME(client), "saa7185", sizeof(I2C_NAME(client)));
encoder = kmalloc(sizeof(struct saa7185), GFP_KERNEL);
@@ -487,11 +486,11 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7185 = {
- .owner = THIS_MODULE,
- .name = "saa7185", /* name */
+ .driver = {
+ .name = "saa7185", /* name */
+ },
.id = I2C_DRIVERID_SAA7185B,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7185_attach_adapter,
.detach_client = saa7185_detach_client,
diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c
index cbca896..41f6f05 100644
--- a/drivers/media/video/saa7191.c
+++ b/drivers/media/video/saa7191.c
@@ -788,10 +788,10 @@
}
static struct i2c_driver i2c_driver_saa7191 = {
- .owner = THIS_MODULE,
- .name = "saa7191",
+ .driver = {
+ .name = "saa7191",
+ },
.id = I2C_DRIVERID_SAA7191,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = saa7191_probe,
.detach_client = saa7191_detach,
.command = saa7191_command
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index d32737d..549c992 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -501,10 +501,10 @@
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "i2c tda7432 driver",
+ .driver = {
+ .name = "i2c tda7432 driver",
+ },
.id = I2C_DRIVERID_TDA7432,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tda7432_probe,
.detach_client = tda7432_detach,
.command = tda7432_command,
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index 1794686..2a353d2 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -221,10 +221,10 @@
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tda9840",
+ .driver = {
+ .name = "tda9840",
+ },
.id = I2C_DRIVERID_TDA9840,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = attach,
.detach_client = detach,
.command = command,
diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c
index a5e37dc..9c3ecf7 100644
--- a/drivers/media/video/tda9875.c
+++ b/drivers/media/video/tda9875.c
@@ -372,10 +372,10 @@
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "i2c tda9875 driver",
+ .driver = {
+ .name = "i2c tda9875 driver",
+ },
.id = I2C_DRIVERID_TDA9875,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tda9875_probe,
.detach_client = tda9875_detach,
.command = tda9875_command,
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 2f2414e..7165a1b 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -819,14 +819,12 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "i2c tda9887 driver",
.id = -1, /* FIXME */
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tda9887_probe,
.detach_client = tda9887_detach,
.command = tda9887_command,
.driver = {
+ .name = "i2c tda9887 driver",
.suspend = tda9887_suspend,
.resume = tda9887_resume,
},
@@ -834,7 +832,6 @@
static struct i2c_client client_template =
{
.name = "tda9887",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index ee36883..17046d9 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -190,10 +190,10 @@
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tea6415c",
+ .driver = {
+ .name = "tea6415c",
+ },
.id = I2C_DRIVERID_TEA6415C,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = attach,
.detach_client = detach,
.command = command,
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 17975c1..3dc89d9 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -167,10 +167,10 @@
}
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tea6420",
+ .driver = {
+ .name = "tea6420",
+ },
.id = I2C_DRIVERID_TEA6420,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = attach,
.detach_client = detach,
.command = command,
diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c
index 7920359..d97f668 100644
--- a/drivers/media/video/tuner-3036.c
+++ b/drivers/media/video/tuner-3036.c
@@ -175,10 +175,10 @@
static struct i2c_driver
i2c_driver_tuner =
{
- .owner = THIS_MODULE,
- .name = "sab3036",
+ .driver = {
+ .name = "sab3036",
+ },
.id = I2C_DRIVERID_SAB3036,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tuner_probe,
.detach_client = tuner_detach,
.command = tuner_command
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index e58abdf..c13c7b9 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -206,7 +206,7 @@
set_freq(c, t->freq);
tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n",
- c->adapter->name, c->driver->name, c->addr << 1, type,
+ c->adapter->name, c->driver->driver.name, c->addr << 1, type,
t->mode_mask);
}
@@ -742,21 +742,18 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tuner",
.id = I2C_DRIVERID_TUNER,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tuner_probe,
.detach_client = tuner_detach,
.command = tuner_command,
.driver = {
+ .name = "tuner",
.suspend = tuner_suspend,
.resume = tuner_resume,
},
};
static struct i2c_client client_template = {
.name = "(tuner unset)",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 5b20e81..0292c5a 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1702,10 +1702,10 @@
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "generic i2c audio driver",
+ .driver = {
+ .name = "generic i2c audio driver",
+ },
.id = I2C_DRIVERID_TVAUDIO,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = chip_probe,
.detach_client = chip_detach,
.command = chip_command,
@@ -1714,7 +1714,6 @@
static struct i2c_client client_template =
{
.name = "(unset)",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 5ac2353..8ac4cb8 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -751,7 +751,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_tveeprom;
- client->flags = I2C_CLIENT_ALLOW_USE;
snprintf(client->name, sizeof(client->name), "tveeprom");
i2c_attach_client(client);
@@ -779,10 +778,10 @@
}
static struct i2c_driver i2c_driver_tveeprom = {
- .owner = THIS_MODULE,
- .name = "tveeprom",
+ .driver = {
+ .name = "tveeprom",
+ },
.id = I2C_DRIVERID_TVEEPROM,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tveeprom_attach_adapter,
.detach_client = tveeprom_detach_client,
.command = tveeprom_command,
diff --git a/drivers/media/video/tvmixer.c b/drivers/media/video/tvmixer.c
index 8318bd1..e837f9f 100644
--- a/drivers/media/video/tvmixer.c
+++ b/drivers/media/video/tvmixer.c
@@ -228,16 +228,14 @@
static struct i2c_driver driver = {
#ifdef I2C_PEC
- .owner = THIS_MODULE,
-#endif
- .name = "tv card mixer driver",
- .id = I2C_DRIVERID_TVMIXER,
-#ifdef I2C_DF_DUMMY
- .flags = I2C_DF_DUMMY,
+ .driver = {
+ .name = "tv card mixer driver",
+ },
#else
- .flags = I2C_DF_NOTIFY,
- .detach_adapter = tvmixer_adapters,
+ .name = "tv card mixer driver",
#endif
+ .id = I2C_DRIVERID_TVMIXER,
+ .detach_adapter = tvmixer_adapters,
.attach_adapter = tvmixer_adapters,
.detach_client = tvmixer_clients,
};
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 97431e2..a60442e 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -714,7 +714,6 @@
static struct i2c_client client_template = {
.name = "(unset)",
- .flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
@@ -801,12 +800,12 @@
/* ----------------------------------------------------------------------- */
static struct i2c_driver driver = {
- .owner = THIS_MODULE,
- .name = "tvp5150",
+ .driver = {
+ .name = "tvp5150",
+ },
/* FIXME */
.id = I2C_DRIVERID_SAA7110,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = tvp5150_attach_adapter,
.detach_client = tvp5150_detach_client,
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 137b58f..8dcee8b 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -631,7 +631,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &vpx3220_i2c_driver;
- client->flags = I2C_CLIENT_ALLOW_USE;
/* Check for manufacture ID and part number */
if (kind < 0) {
@@ -722,11 +721,11 @@
*/
static struct i2c_driver vpx3220_i2c_driver = {
- .owner = THIS_MODULE,
- .name = "vpx3220",
+ .driver = {
+ .name = "vpx3220",
+ },
.id = I2C_DRIVERID_VPX3220,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = vpx3220_attach_adapter,
.detach_client = vpx3220_detach_client,
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index a6936ad..bbfd55c 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -40,10 +40,10 @@
MODULE_LICENSE("GPL");
#define wm8775_err(fmt, arg...) do { \
- printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
#define wm8775_info(fmt, arg...) do { \
- printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->driver.name, \
i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0)
@@ -168,7 +168,6 @@
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver;
- client->flags = I2C_CLIENT_ALLOW_USE;
snprintf(client->name, sizeof(client->name) - 1, "wm8775");
wm8775_info("chip found @ 0x%x (%s)\n", address << 1, adapter->name);
@@ -233,15 +232,15 @@
/* i2c implementation */
static struct i2c_driver i2c_driver = {
- .name = "wm8775",
+ .driver = {
+ .name = "wm8775",
+ },
.id = I2C_DRIVERID_WM8775,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = wm8775_probe,
.detach_client = wm8775_detach,
.command = wm8775_command,
- .owner = THIS_MODULE,
};
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index 07bde9a..4034f1b 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -1311,7 +1311,7 @@
res = -ENODEV;
goto open_unlock_and_return;
}
- if (!try_module_get(zr->decoder->driver->owner)) {
+ if (!try_module_get(zr->decoder->driver->driver.owner)) {
dprintk(1,
KERN_ERR
"%s: failed to grab ownership of i2c decoder\n",
@@ -1321,13 +1321,13 @@
goto open_unlock_and_return;
}
if (zr->encoder &&
- !try_module_get(zr->encoder->driver->owner)) {
+ !try_module_get(zr->encoder->driver->driver.owner)) {
dprintk(1,
KERN_ERR
"%s: failed to grab ownership of i2c encoder\n",
ZR_DEVNAME(zr));
res = -EIO;
- module_put(zr->decoder->driver->owner);
+ module_put(zr->decoder->driver->driver.owner);
module_put(THIS_MODULE);
goto open_unlock_and_return;
}
@@ -1393,9 +1393,9 @@
open_unlock_and_return:
/* if we grabbed locks, release them accordingly */
if (have_module_locks) {
- module_put(zr->decoder->driver->owner);
+ module_put(zr->decoder->driver->driver.owner);
if (zr->encoder) {
- module_put(zr->encoder->driver->owner);
+ module_put(zr->encoder->driver->driver.owner);
}
module_put(THIS_MODULE);
}
@@ -1461,9 +1461,9 @@
kfree(fh);
/* release locks on the i2c modules */
- module_put(zr->decoder->driver->owner);
+ module_put(zr->decoder->driver->driver.owner);
if (zr->encoder) {
- module_put(zr->encoder->driver->owner);
+ module_put(zr->encoder->driver->driver.owner);
}
module_put(THIS_MODULE);
diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c
index 04d6933..3605a6f 100644
--- a/drivers/usb/media/w9968cf.c
+++ b/drivers/usb/media/w9968cf.c
@@ -1533,12 +1533,12 @@
}
} else {
DBG(4, "Rejected client [%s] with driver [%s]",
- client->name, client->driver->name)
+ client->name, client->driver->driver.name)
return -EINVAL;
}
DBG(5, "I2C attach client [%s] with driver [%s]",
- client->name, client->driver->name)
+ client->name, client->driver->driver.name)
return 0;
}
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index ad60bbb..a1f2c5e 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -1288,18 +1288,13 @@
return 0;
}
-static int maven_command(struct i2c_client* client, unsigned int cmd, void* arg) {
- return -ENOIOCTLCMD; /* or -EINVAL, depends on who will call this */
-}
-
static struct i2c_driver maven_driver={
- .owner = THIS_MODULE,
- .name = "maven",
+ .driver = {
+ .name = "maven",
+ },
.id = I2C_DRIVERID_MGATVO,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = maven_attach_adapter,
.detach_client = maven_detach_client,
- .command = maven_command,
};
/* ************************** */
diff --git a/include/linux/hwmon-vid.h b/include/linux/hwmon-vid.h
index cd4b7a0..f346e4d 100644
--- a/include/linux/hwmon-vid.h
+++ b/include/linux/hwmon-vid.h
@@ -23,14 +23,14 @@
#ifndef _LINUX_HWMON_VID_H
#define _LINUX_HWMON_VID_H
-int vid_from_reg(int val, int vrm);
-int vid_which_vrm(void);
+int vid_from_reg(int val, u8 vrm);
+u8 vid_which_vrm(void);
/* vrm is the VRM/VRD document version multiplied by 10.
val is in mV to avoid floating point in the kernel.
Returned value is the 4-, 5- or 6-bit VID code.
Note that only VRM 9.x is supported for now. */
-static inline int vid_to_reg(int val, int vrm)
+static inline int vid_to_reg(int val, u8 vrm)
{
switch (vrm) {
case 91: /* VRM 9.1 */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 006c81e..fb46f8d 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -25,12 +25,6 @@
/*
* ---- Driver types -----------------------------------------------------
- * device id name + number function description, i2c address(es)
- *
- * Range 1000-1999 range is defined in sensors/sensors.h
- * Range 0x100 - 0x1ff is for V4L2 Common Components
- * Range 0xf000 - 0xffff is reserved for local experimentation, and should
- * never be used in official drivers
*/
#define I2C_DRIVERID_MSP3400 1
@@ -110,13 +104,7 @@
#define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */
#define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */
-#define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */
-#define I2C_DRIVERID_EXP1 0xF1
-#define I2C_DRIVERID_EXP2 0xF2
-#define I2C_DRIVERID_EXP3 0xF3
-
#define I2C_DRIVERID_I2CDEV 900
-#define I2C_DRIVERID_I2CPROC 901
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
#define I2C_DRIVERID_ALERT 903 /* SMBus Alert Responder Client */
@@ -131,15 +119,12 @@
#define I2C_DRIVERID_ADM1021 1008
#define I2C_DRIVERID_ADM9240 1009
#define I2C_DRIVERID_LTC1710 1010
-#define I2C_DRIVERID_SIS5595 1011
#define I2C_DRIVERID_ICSPLL 1012
#define I2C_DRIVERID_BT869 1013
#define I2C_DRIVERID_MAXILIFE 1014
#define I2C_DRIVERID_MATORB 1015
#define I2C_DRIVERID_GL520 1016
#define I2C_DRIVERID_THMC50 1017
-#define I2C_DRIVERID_DDCMON 1018
-#define I2C_DRIVERID_VIA686A 1019
#define I2C_DRIVERID_ADM1025 1020
#define I2C_DRIVERID_LM87 1021
#define I2C_DRIVERID_PCF8574 1022
@@ -151,21 +136,16 @@
#define I2C_DRIVERID_FSCPOS 1028
#define I2C_DRIVERID_FSCSCY 1029
#define I2C_DRIVERID_PCF8591 1030
-#define I2C_DRIVERID_SMSC47M1 1031
-#define I2C_DRIVERID_VT1211 1032
#define I2C_DRIVERID_LM92 1033
-#define I2C_DRIVERID_VT8231 1034
#define I2C_DRIVERID_SMARTBATT 1035
#define I2C_DRIVERID_BMCSENSORS 1036
#define I2C_DRIVERID_FS451 1037
-#define I2C_DRIVERID_W83627HF 1038
#define I2C_DRIVERID_LM85 1039
#define I2C_DRIVERID_LM83 1040
#define I2C_DRIVERID_LM90 1042
#define I2C_DRIVERID_ASB100 1043
#define I2C_DRIVERID_FSCHER 1046
#define I2C_DRIVERID_W83L785TS 1047
-#define I2C_DRIVERID_SMSC47B397 1050
/*
* ---- Adapter types ----------------------------------------------------
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 5e19a7b..7863a59 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -105,14 +105,14 @@
* A driver is capable of handling one or more physical devices present on
* I2C adapters. This information is used to inform the driver of adapter
* events.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver.
*/
struct i2c_driver {
- struct module *owner;
- char name[32];
int id;
unsigned int class;
- unsigned int flags; /* div., see below */
/* Notifies the driver that a new bus has appeared. This routine
* can be used by the driver to test if the bus meets its conditions
@@ -250,18 +250,7 @@
dev_set_drvdata (&dev->dev, data);
}
-/*flags for the driver struct: */
-#define I2C_DF_NOTIFY 0x01 /* notify on bus (de/a)ttaches */
-#if 0
-/* this flag is gone -- there is a (optional) driver->detach_adapter
- * callback now which can be used instead */
-# define I2C_DF_DUMMY 0x02
-#endif
-
/*flags for the client struct: */
-#define I2C_CLIENT_ALLOW_USE 0x01 /* Client allows access */
-#define I2C_CLIENT_ALLOW_MULTIPLE_USE 0x02 /* Allow multiple access-locks */
- /* on an i2c_client */
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
#define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
/* Must equal I2C_M_TEN below */
@@ -302,26 +291,20 @@
extern int i2c_add_adapter(struct i2c_adapter *);
extern int i2c_del_adapter(struct i2c_adapter *);
-extern int i2c_add_driver(struct i2c_driver *);
+extern int i2c_register_driver(struct module *, struct i2c_driver *);
extern int i2c_del_driver(struct i2c_driver *);
+static inline int i2c_add_driver(struct i2c_driver *driver)
+{
+ return i2c_register_driver(THIS_MODULE, driver);
+}
+
extern int i2c_attach_client(struct i2c_client *);
extern int i2c_detach_client(struct i2c_client *);
-/* New function: This is to get an i2c_client-struct for controlling the
- client either by using i2c_control-function or having the
- client-module export functions that can be used with the i2c_client
- -struct. */
-extern struct i2c_client *i2c_get_client(int driver_id, int adapter_id,
- struct i2c_client *prev);
-
-/* Should be used with new function
- extern struct i2c_client *i2c_get_client(int,int,struct i2c_client *);
- to make sure that client-struct is valid and that it is okay to access
- the i2c-client.
- returns -EACCES if client doesn't allow use (default)
- returns -EBUSY if client doesn't allow multiple use (default) and
- usage_count >0 */
+/* Should be used to make sure that client-struct is valid and that it
+ is okay to access the i2c-client.
+ returns -ENODEV if client has gone in the meantime */
extern int i2c_use_client(struct i2c_client *);
extern int i2c_release_client(struct i2c_client *);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 24db724..a213e99 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -986,6 +986,7 @@
#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a
#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C
#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS 0x0034
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036
#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037
diff --git a/include/media/tuner.h b/include/media/tuner.h
index faa0f8e..b37cde6 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -218,14 +218,15 @@
extern int tea5767_autodetection(struct i2c_client *c);
#define tuner_warn(fmt, arg...) do {\
- printk(KERN_WARNING "%s %d-%04x: " fmt, t->i2c.driver->name, \
+ printk(KERN_WARNING "%s %d-%04x: " fmt, t->i2c.driver->driver.name, \
t->i2c.adapter->nr, t->i2c.addr , ##arg); } while (0)
#define tuner_info(fmt, arg...) do {\
- printk(KERN_INFO "%s %d-%04x: " fmt, t->i2c.driver->name, \
+ printk(KERN_INFO "%s %d-%04x: " fmt, t->i2c.driver->driver.name, \
t->i2c.adapter->nr, t->i2c.addr , ##arg); } while (0)
#define tuner_dbg(fmt, arg...) do {\
if (tuner_debug) \
- printk(KERN_DEBUG "%s %d-%04x: " fmt, t->i2c.driver->name, \
+ printk(KERN_DEBUG "%s %d-%04x: " fmt, \
+ t->i2c.driver->driver.name, \
t->i2c.adapter->nr, t->i2c.addr , ##arg); } while (0)
#endif /* __KERNEL__ */
diff --git a/sound/oss/dmasound/dac3550a.c b/sound/oss/dmasound/dac3550a.c
index 533895e..7360d89 100644
--- a/sound/oss/dmasound/dac3550a.c
+++ b/sound/oss/dmasound/dac3550a.c
@@ -41,10 +41,10 @@
static int daca_detach_client(struct i2c_client *client);
struct i2c_driver daca_driver = {
- .owner = THIS_MODULE,
- .name = "DAC3550A driver V " DACA_VERSION,
+ .driver = {
+ .name = "DAC3550A driver V " DACA_VERSION,
+ },
.id = I2C_DRIVERID_DACA,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = daca_attach_adapter,
.detach_client = daca_detach_client,
};
diff --git a/sound/oss/dmasound/tas_common.c b/sound/oss/dmasound/tas_common.c
index d36a1fe..8131599 100644
--- a/sound/oss/dmasound/tas_common.c
+++ b/sound/oss/dmasound/tas_common.c
@@ -47,9 +47,9 @@
static int tas_detach_client(struct i2c_client *);
struct i2c_driver tas_driver = {
- .owner = THIS_MODULE,
- .name = "tas",
- .flags = I2C_DF_NOTIFY,
+ .driver = {
+ .name = "tas",
+ },
.attach_adapter = tas_attach_adapter,
.detach_client = tas_detach_client,
};
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 097fbcf..6058c2d 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -41,9 +41,10 @@
static int keywest_detach_client(struct i2c_client *client);
struct i2c_driver keywest_driver = {
- .name = "PMac Keywest Audio",
+ .driver = {
+ .name = "PMac Keywest Audio",
+ },
.id = I2C_DRIVERID_KEYWEST,
- .flags = I2C_DF_NOTIFY,
.attach_adapter = &keywest_attach_adapter,
.detach_client = &keywest_detach_client,
};