[PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32. It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).
[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c
index 1eb4f72..da8a0f2 100644
--- a/arch/ppc/syslib/of_device.c
+++ b/arch/ppc/syslib/of_device.c
@@ -105,7 +105,7 @@
return 0;
}
-static int of_device_suspend(struct device *dev, u32 state)
+static int of_device_suspend(struct device *dev, pm_message_t state)
{
struct of_device * of_dev = to_of_device(dev);
struct of_platform_driver * drv = to_of_platform_driver(dev->driver);
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index bdd96b0..0a7aa07 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -26,11 +26,11 @@
down(&dev->sem);
if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state) {
+ && dev->power.pm_parent->power.power_state.event) {
dev_err(dev, "PM: resume from %d, parent %s still %d\n",
- dev->power.power_state,
+ dev->power.power_state.event,
dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state);
+ dev->power.pm_parent->power.power_state.event);
}
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
@@ -54,7 +54,7 @@
list_add_tail(entry, &dpm_active);
up(&dpm_list_sem);
- if (!dev->power.prev_state)
+ if (!dev->power.prev_state.event)
resume_device(dev);
down(&dpm_list_sem);
put_device(dev);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 325962d..e8f0519 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -13,10 +13,10 @@
static void runtime_resume(struct device * dev)
{
dev_dbg(dev, "resuming\n");
- if (!dev->power.power_state)
+ if (!dev->power.power_state.event)
return;
if (!resume_device(dev))
- dev->power.power_state = 0;
+ dev->power.power_state = PMSG_ON;
}
@@ -49,10 +49,10 @@
int error = 0;
down(&dpm_sem);
- if (dev->power.power_state == state)
+ if (dev->power.power_state.event == state.event)
goto Done;
- if (dev->power.power_state)
+ if (dev->power.power_state.event)
runtime_resume(dev);
if (!(error = suspend_device(dev, state)))
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 2ccee37..5050176 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -40,22 +40,22 @@
int error = 0;
down(&dev->sem);
- if (dev->power.power_state) {
+ if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
- dev->power.power_state, state);
+ dev->power.power_state.event, state.event);
}
if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state) {
+ && dev->power.pm_parent->power.power_state.event) {
dev_err(dev,
"PM: suspend %d->%d, parent %s already %d\n",
- dev->power.power_state, state,
+ dev->power.power_state.event, state.event,
dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state);
+ dev->power.pm_parent->power.power_state.event);
}
dev->power.prev_state = dev->power.power_state;
- if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+ if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
dev_dbg(dev, "suspending\n");
error = dev->bus->suspend(dev, state);
}
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index f82b3df..8d04fb4 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -26,19 +26,19 @@
static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
{
- return sprintf(buf, "%u\n", dev->power.power_state);
+ return sprintf(buf, "%u\n", dev->power.power_state.event);
}
static ssize_t state_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n)
{
- u32 state;
+ pm_message_t state;
char * rest;
int error = 0;
- state = simple_strtoul(buf, &rest, 10);
+ state.event = simple_strtoul(buf, &rest, 10);
if (*rest)
return -EINVAL;
- if (state)
+ if (state.event)
error = dpm_runtime_suspend(dev, state);
else
dpm_runtime_resume(dev);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index dae1bd5..73ca8f7 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1229,7 +1229,7 @@
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
- rqpm.pm_state = state;
+ rqpm.pm_state = state.event;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
@@ -1248,7 +1248,7 @@
rq.special = &args;
rq.pm = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
- rqpm.pm_state = 0;
+ rqpm.pm_state = PM_EVENT_ON;
return ide_do_drive_cmd(drive, &rq, ide_head_wait);
}
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 10592ce..24e21b2 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -350,9 +350,9 @@
{
ide_hwif_t *hwif = NULL;
- printk("SC1200: suspend(%u)\n", state);
+ printk("SC1200: suspend(%u)\n", state.event);
- if (state == 0) {
+ if (state.event == PM_EVENT_ON) {
// we only save state when going from full power to less
//
@@ -386,8 +386,8 @@
/* You don't need to iterate over disks -- sysfs should have done that for you already */
pci_disable_device(dev);
- pci_set_power_state(dev,state);
- dev->current_state = state;
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ dev->current_state = state.event;
return 0;
}
@@ -396,8 +396,8 @@
ide_hwif_t *hwif = NULL;
printk("SC1200: resume\n");
- pci_set_power_state(dev,0); // bring chip back from sleep state
- dev->current_state = 0;
+ pci_set_power_state(dev, PCI_D0); // bring chip back from sleep state
+ dev->current_state = PM_EVENT_ON;
pci_enable_device(dev);
//
// loop over all interfaces that are part of this pci device:
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index d2760b8..87d1f8a 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1509,7 +1509,7 @@
ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
int rc = 0;
- if (state != mdev->ofdev.dev.power.power_state && state >= 2) {
+ if (state.event != mdev->ofdev.dev.power.power_state.event && state.event >= PM_EVENT_SUSPEND) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
mdev->ofdev.dev.power.power_state = state;
@@ -1524,7 +1524,7 @@
ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
int rc = 0;
- if (mdev->ofdev.dev.power.power_state != 0) {
+ if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
rc = pmac_ide_do_resume(hwif);
if (rc == 0)
mdev->ofdev.dev.power.power_state = PMSG_ON;
@@ -1613,7 +1613,7 @@
ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
int rc = 0;
- if (state != pdev->dev.power.power_state && state >= 2) {
+ if (state.event != pdev->dev.power.power_state.event && state.event >= 2) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
pdev->dev.power.power_state = state;
@@ -1628,7 +1628,7 @@
ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
int rc = 0;
- if (pdev->dev.power.power_state != 0) {
+ if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
rc = pmac_ide_do_resume(hwif);
if (rc == 0)
pdev->dev.power.power_state = PMSG_ON;
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 7e1afca..c0712a1 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -708,7 +708,7 @@
{
struct media_bay_info *bay = macio_get_drvdata(mdev);
- if (state != mdev->ofdev.dev.power.power_state && state == PM_SUSPEND_MEM) {
+ if (state.event != mdev->ofdev.dev.power.power_state.event && state.event == PM_EVENT_SUSPEND) {
down(&bay->lock);
bay->sleeping = 1;
set_mb_power(bay, 0);
@@ -723,7 +723,7 @@
{
struct media_bay_info *bay = macio_get_drvdata(mdev);
- if (mdev->ofdev.dev.power.power_state != 0) {
+ if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) {
mdev->ofdev.dev.power.power_state = PMSG_ON;
/* We re-enable the bay using it's previous content
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 4a0a0ad..645a2e5 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -3065,7 +3065,7 @@
static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
{
- if (state != PM_SUSPEND_DISK || pmu_sys_suspended)
+ if (state.event != PM_EVENT_SUSPEND || pmu_sys_suspended)
return 0;
/* Suspend PMU event interrupts */
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 7d8b3ca..9ea5747 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -888,7 +888,7 @@
if (down_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
- if (state > 0) { /* state 0 seems to mean DEVICE_PM_ON */
+ if (state.event > PM_EVENT_ON) {
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
#ifdef ENABLE_RC
cancel_delayed_work(&cinergyt2->rc_query_work);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 4be9539..6d9de62 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -1757,12 +1757,12 @@
idev = ndev->priv;
down(&idev->sem);
if (pdev->current_state != 0) { /* already suspended */
- if (state > pdev->current_state) { /* simply go deeper */
- pci_set_power_state(pdev,state);
- pdev->current_state = state;
+ if (state.event > pdev->current_state) { /* simply go deeper */
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ pdev->current_state = state.event;
}
else
- IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state);
+ IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state.event);
up(&idev->sem);
return 0;
}
@@ -1777,7 +1777,7 @@
}
pci_set_power_state(pdev, pci_choose_state(pdev, state));
- pdev->current_state = state;
+ pdev->current_state = state.event;
idev->resume_ok = 1;
up(&idev->sem);
return 0;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 6db1fb6..abac1e40 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2239,7 +2239,7 @@
u32 *vals = stats_rid.vals;
clear_bit(JOB_STATS, &ai->flags);
- if (ai->power) {
+ if (ai->power.event) {
up(&ai->sem);
return;
}
@@ -2969,7 +2969,7 @@
break;
}
- if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) {
+ if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) {
up(&ai->sem);
continue;
}
@@ -5521,7 +5521,7 @@
pci_restore_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0);
- if (ai->power > 1) {
+ if (ai->power.event > 1) {
reset_card(dev, 0);
mpi_init_descriptors(ai);
setup_card(ai, dev->dev_addr, 0);
@@ -7123,7 +7123,7 @@
int rc = 0;
struct airo_info *ai = (struct airo_info *)dev->priv;
- if (ai->power)
+ if (ai->power.event)
return 0;
switch (cmd) {
@@ -7202,7 +7202,7 @@
/* Get stats out of the card */
clear_bit(JOB_WSTATS, &local->flags);
- if (local->power) {
+ if (local->power.event) {
up(&local->sem);
return;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1b34fc5..c62d2f0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -333,13 +333,17 @@
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
if (ret >= 0)
- state = ret;
+ state.event = ret;
}
- switch (state) {
- case 0: return PCI_D0;
- case 3: return PCI_D3hot;
+
+ switch (state.event) {
+ case PM_EVENT_ON:
+ return PCI_D0;
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_SUSPEND:
+ return PCI_D3hot;
default:
- printk("They asked me for state %d\n", state);
+ printk("They asked me for state %d\n", state.event);
BUG();
}
return PCI_D0;
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index ff19332..a4857db 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1766,7 +1766,7 @@
struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev);
unsigned long flags;
- if (state == mdev->ofdev.dev.power.power_state || state < 2)
+ if (state.event == mdev->ofdev.dev.power.power_state.event || state.event < 2)
return 0;
scsi_block_requests(ms->host);
@@ -1791,7 +1791,7 @@
struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev);
unsigned long flags;
- if (mdev->ofdev.dev.power.power_state == 0)
+ if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
return 0;
set_mesh_power(ms, 1);
@@ -1802,7 +1802,7 @@
enable_irq(ms->meshintr);
scsi_unblock_requests(ms->host);
- mdev->ofdev.dev.power.power_state = 0;
+ mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
return 0;
}
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 5bfde99..5ddd8ab 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1600,7 +1600,7 @@
return 0;
}
- if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2)
+ if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
return 0;
pmz_debug("suspend, switching to state %d\n", pm_state);
@@ -1660,7 +1660,7 @@
if (uap == NULL)
return 0;
- if (mdev->ofdev.dev.power.power_state == 0)
+ if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
return 0;
pmz_debug("resume, switching to state 0\n");
@@ -1713,7 +1713,7 @@
pmz_debug("resume, switching complete\n");
- mdev->ofdev.dev.power.power_state = 0;
+ mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
return 0;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c3e46d2..c9412da 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1570,7 +1570,7 @@
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state <= intf->dev.power.power_state)
+ if (state.event <= intf->dev.power.power_state.event)
continue;
if (!intf->dev.driver)
continue;
@@ -1578,11 +1578,11 @@
if (driver->suspend) {
status = driver->suspend(intf, state);
- if (intf->dev.power.power_state != state
+ if (intf->dev.power.power_state.event != state.event
|| status)
dev_err(&intf->dev,
"suspend %d fail, code %d\n",
- state, status);
+ state.event, status);
}
/* only drivers with suspend() can ever resume();
@@ -1595,7 +1595,7 @@
* since we know every driver's probe/disconnect works
* even for drivers that can't suspend.
*/
- if (!driver->suspend || state > PM_SUSPEND_MEM) {
+ if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
#if 1
dev_warn(&intf->dev, "resume is unsafe!\n");
#else
@@ -1616,7 +1616,7 @@
* policies (when HNP doesn't apply) once we have mechanisms to
* turn power back on! (Likely not before 2.7...)
*/
- if (state > PM_SUSPEND_MEM) {
+ if (state.event > PM_EVENT_FREEZE) {
dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
}
@@ -1733,7 +1733,7 @@
struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state == PMSG_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
continue;
if (!intf->dev.driver) {
/* FIXME maybe force to alt 0 */
@@ -1747,11 +1747,11 @@
/* can we do better than just logging errors? */
status = driver->resume(intf);
- if (intf->dev.power.power_state != PMSG_ON
+ if (intf->dev.power.power_state.event != PM_EVENT_ON
|| status)
dev_dbg(&intf->dev,
"resume fail, state %d code %d\n",
- intf->dev.power.power_state, status);
+ intf->dev.power.power_state.event, status);
}
status = 0;
@@ -1934,7 +1934,7 @@
unsigned port1;
int status;
- if (intf->dev.power.power_state == PM_SUSPEND_ON)
+ if (intf->dev.power.power_state.event == PM_EVENT_ON)
return 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 99c85d2..2cddd8a 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1400,7 +1400,7 @@
driver = to_usb_driver(dev->driver);
/* there's only one USB suspend state */
- if (intf->dev.power.power_state)
+ if (intf->dev.power.power_state.event)
return 0;
if (driver->suspend)
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index b01efb6..65ac9fe 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -641,7 +641,7 @@
spin_lock_irqsave (&ehci->lock, flags);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"%s\n"
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index c58408c..447f488 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -631,7 +631,7 @@
hcd->product_desc,
hcd_name);
- if (bus->controller->power.power_state) {
+ if (bus->controller->power.power_state.event) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 7a890a6..80eaf65 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1781,9 +1781,9 @@
if (phase != SUSPEND_POWER_DOWN)
return retval;
- if (state <= PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
retval = sl811h_hub_suspend(hcd);
- else
+ else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
dev->power.power_state = state;
@@ -1802,7 +1802,7 @@
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
- if (dev->power.power_state > PM_SUSPEND_MEM
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND
|| !hcd->can_wakeup) {
sl811->port1 = 0;
port_power(sl811, 1);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index cda7249..fd7fb98 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1533,7 +1533,7 @@
if (down_interruptible (&dev->sem))
return -ERESTARTSYS;
- if (intf->dev.power.power_state != PMSG_ON) {
+ if (intf->dev.power.power_state.event != PM_EVENT_ON) {
up (&dev->sem);
return -EHOSTUNREACH;
}
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 7bc1d44..b0eba3a 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2323,17 +2323,16 @@
* can properly take care of D3 ? Also, with swsusp, we
* know we'll be rebooted, ...
*/
-#ifdef CONFIG_PPC_PMAC
+#ifndef CONFIG_PPC_PMAC
/* HACK ALERT ! Once I find a proper way to say to each driver
* individually what will happen with it's PCI slot, I'll change
* that. On laptops, the AGP slot is just unclocked, so D2 is
* expected, while on desktops, the card is powered off
*/
- if (state >= 3)
- state = 2;
+ return 0;
#endif /* CONFIG_PPC_PMAC */
- if (state != 2 || state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "aty128fb: suspending...\n");
@@ -2367,7 +2366,7 @@
* used dummy fb ops, 2.5 need proper support for this at the
* fbdev level
*/
- if (state == 2)
+ if (state.event != PM_EVENT_ON)
aty128_set_suspend(par, 1);
release_console_sem();
@@ -2382,12 +2381,11 @@
struct fb_info *info = pci_get_drvdata(pdev);
struct aty128fb_par *par = info->par;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
/* Wakeup chip */
- if (pdev->dev.power.power_state == 2)
- aty128_set_suspend(par, 0);
+ aty128_set_suspend(par, 0);
par->asleep = 0;
/* Restore display & engine */
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 8c42538..3e10bd8 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2022,17 +2022,16 @@
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
-#ifdef CONFIG_PPC_PMAC
+#ifndef CONFIG_PPC_PMAC
/* HACK ALERT ! Once I find a proper way to say to each driver
* individually what will happen with it's PCI slot, I'll change
* that. On laptops, the AGP slot is just unclocked, so D2 is
* expected, while on desktops, the card is powered off
*/
- if (state >= 3)
- state = 2;
+ return 0;
#endif /* CONFIG_PPC_PMAC */
- if (state != 2 || state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
acquire_console_sem();
@@ -2071,12 +2070,12 @@
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
acquire_console_sem();
- if (pdev->dev.power.power_state == 2)
+ if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
par->asleep = 0;
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 98352af..59a1b6f 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2526,18 +2526,18 @@
struct radeonfb_info *rinfo = info->par;
int i;
- if (state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
- pci_name(pdev), state);
+ pci_name(pdev), state.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
- if (state != PM_SUSPEND_MEM)
+ if (state.event == PM_EVENT_FREEZE)
goto done;
acquire_console_sem();
@@ -2616,7 +2616,7 @@
struct radeonfb_info *rinfo = info->par;
int rc = 0;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
if (rinfo->no_schedule) {
@@ -2626,7 +2626,7 @@
acquire_console_sem();
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
- pci_name(pdev), pdev->dev.power.power_state);
+ pci_name(pdev), pdev->dev.power.power_state.event);
if (pci_enable_device(pdev)) {
@@ -2637,7 +2637,7 @@
}
pci_set_master(pdev);
- if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
/* Wakeup chip. Check from config space if we were powered off
* (todo: additionally, check CLK_PIN_CNTL too)
*/
diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c
index e75a965..4131243 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/chipsfb.c
@@ -462,9 +462,9 @@
{
struct fb_info *p = pci_get_drvdata(pdev);
- if (state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
- if (state != PM_SUSPEND_MEM)
+ if (state.event != PM_SUSPEND_MEM)
goto done;
acquire_console_sem();
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 7513fb9..6db1834 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1506,12 +1506,12 @@
struct i810fb_par *par = (struct i810fb_par *) info->par;
int blank = 0, prev_state = par->cur_state;
- if (state == prev_state)
+ if (state.event == prev_state)
return 0;
- par->cur_state = state;
+ par->cur_state = state.event;
- switch (state) {
+ switch (state.event) {
case 1:
blank = VESA_VSYNC_SUSPEND;
break;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 7aeb208..5cfb076 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -186,7 +186,9 @@
struct device;
-typedef u32 __bitwise pm_message_t;
+typedef struct pm_message {
+ int event;
+} pm_message_t;
/*
* There are 4 important states driver can be in:
@@ -207,9 +209,13 @@
* or something similar soon.
*/
-#define PMSG_FREEZE ((__force pm_message_t) 3)
-#define PMSG_SUSPEND ((__force pm_message_t) 3)
-#define PMSG_ON ((__force pm_message_t) 0)
+#define PM_EVENT_ON 0
+#define PM_EVENT_FREEZE 1
+#define PM_EVENT_SUSPEND 2
+
+#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
struct dev_pm_info {
pm_message_t power_state;