[TG3]: Disable TSO on 5906 if CLKREQ is enabled.
Due to hardware errata, TSO must be disabled if the PCI Express clock
request is enabled on 5906. The chip may hang when transmitting TSO
frames if CLKREQ is enabled.
Update version to 3.69.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 6e86866..1dbdd6b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.68"
-#define DRV_MODULE_RELDATE "November 02, 2006"
+#define DRV_MODULE_VERSION "3.69"
+#define DRV_MODULE_RELDATE "November 15, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -10366,7 +10366,7 @@
u32 pci_state_reg, grc_misc_cfg;
u32 val;
u16 pci_cmd;
- int err;
+ int err, pcie_cap;
/* Force memory write invalidate off. If we leave it on,
* then on 5700_BX chips we have to enable a workaround.
@@ -10541,8 +10541,19 @@
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
- if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0)
+ pcie_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_EXP);
+ if (pcie_cap != 0) {
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u16 lnkctl;
+
+ pci_read_config_word(tp->pdev,
+ pcie_cap + PCI_EXP_LNKCTL,
+ &lnkctl);
+ if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN)
+ tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
+ }
+ }
/* If we have an AMD 762 or VIA K8T800 chipset, write
* reordering to the mailbox registers done by the host
@@ -11809,6 +11820,7 @@
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
tp->pci_chip_rev_id == CHIPREV_ID_5705_A0 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
} else {