mtd: support reading OOB without ECC
This fixes issues with `nanddump -n' and the MEMREADOOB[64] ioctls on
hardware that performs error correction when reading only OOB data. A
driver for such hardware needs to know when we're doing a RAW vs. a
normal write, but mtd_do_read_oob does not pass such information to the
lower layers (e.g., NAND). We should pass MTD_OOB_RAW or MTD_OOB_PLACE
based on the MTD file mode.
For now, most drivers can get away with just setting:
chip->ecc.read_oob_raw = chip->ecc.read_oob
This is done by default; but for systems that behave as described above,
you must supply your own replacement function.
This was tested with nandsim as well as on actual SLC NAND.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index bcb7f05..d0eaef6 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -435,9 +435,11 @@
return ret;
}
-static int mtd_do_readoob(struct mtd_info *mtd, uint64_t start,
- uint32_t length, void __user *ptr, uint32_t __user *retp)
+static int mtd_do_readoob(struct file *file, struct mtd_info *mtd,
+ uint64_t start, uint32_t length, void __user *ptr,
+ uint32_t __user *retp)
{
+ struct mtd_file_info *mfi = file->private_data;
struct mtd_oob_ops ops;
int ret = 0;
@@ -455,7 +457,7 @@
ops.ooblen = length;
ops.ooboffs = start & (mtd->writesize - 1);
ops.datbuf = NULL;
- ops.mode = MTD_OOB_PLACE;
+ ops.mode = (mfi->mode == MTD_MODE_RAW) ? MTD_OOB_RAW : MTD_OOB_PLACE;
if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs))
return -EINVAL;
@@ -716,7 +718,7 @@
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
buf.ptr, &buf_user->start);
break;
}
@@ -743,7 +745,7 @@
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start, buf.length,
+ ret = mtd_do_readoob(file, mtd, buf.start, buf.length,
(void __user *)(uintptr_t)buf.usr_ptr,
&buf_user->length);
break;
@@ -1029,7 +1031,7 @@
if (copy_from_user(&buf, argp, sizeof(buf)))
ret = -EFAULT;
else
- ret = mtd_do_readoob(mtd, buf.start,
+ ret = mtd_do_readoob(file, mtd, buf.start,
buf.length, compat_ptr(buf.ptr),
&buf_user->start);
break;