Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index ab1e8d7..5cb9a19 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -10,8 +10,8 @@
(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
FF1152AMT0221 D1215994A VIRTEX FPGA board.
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing this driver.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+MAC 10/100 Universal version 4.0 have been used for developing this driver.
This driver supports both the platform bus and PCI.
@@ -54,27 +54,27 @@
When one or more packets are received, an interrupt happens. The interrupts
are not queued so the driver has to scan all the descriptors in the ring during
the receive process.
-This is based on NAPI so the interrupt handler signals only if there is work to be
-done, and it exits.
+This is based on NAPI so the interrupt handler signals only if there is work
+to be done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
4.3) Timer-Driver Interrupt
-Instead of having the device that asynchronously notifies the frame receptions, the
-driver configures a timer to generate an interrupt at regular intervals.
-Based on the granularity of the timer, the frames that are received by the device
-will experience different levels of latency. Some NICs have dedicated timer
-device to perform this task. STMMAC can use either the RTC device or the TMU
-channel 2 on STLinux platforms.
+Instead of having the device that asynchronously notifies the frame receptions,
+the driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the
+device will experience different levels of latency. Some NICs have dedicated
+timer device to perform this task. STMMAC can use either the RTC device or the
+TMU channel 2 on STLinux platforms.
The timers frequency can be passed to the driver as parameter; when change it,
take care of both hardware capability and network stability/performance impact.
-Several performance tests on STM platforms showed this optimisation allows to spare
-the CPU while having the maximum throughput.
+Several performance tests on STM platforms showed this optimisation allows to
+spare the CPU while having the maximum throughput.
4.4) WOL
-Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
-core.
+Wake up on Lan feature through Magic and Unicast frames are supported for the
+GMAC core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
@@ -106,7 +106,8 @@
These are included in the include/linux/stmmac.h header file
and detailed below as well:
- struct plat_stmmacenet_data {
+struct plat_stmmacenet_data {
+ char *phy_bus_name;
int bus_id;
int phy_addr;
int interface;
@@ -124,19 +125,24 @@
void (*bus_setup)(void __iomem *ioaddr);
int (*init)(struct platform_device *pdev);
void (*exit)(struct platform_device *pdev);
+ void *custom_cfg;
+ void *custom_data;
void *bsp_priv;
};
Where:
+ o phy_bus_name: phy bus name to attach to the stmmac.
o bus_id: bus identifier.
o phy_addr: the physical address can be passed from the platform.
If it is set to -1 the driver will automatically
detect it at run-time by probing all the 32 addresses.
o interface: PHY device's interface.
o mdio_bus_data: specific platform fields for the MDIO bus.
- o pbl: the Programmable Burst Length is maximum number of beats to
+ o dma_cfg: internal DMA parameters
+ o pbl: the Programmable Burst Length is maximum number of beats to
be transferred in one DMA transaction.
GMAC also enables the 4xPBL by default.
+ o fixed_burst/mixed_burst/burst_len
o clk_csr: fixed CSR Clock range selection.
o has_gmac: uses the GMAC core.
o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -160,8 +166,9 @@
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
registers.
- o custom_cfg: this is a custom configuration that can be passed while
- initialising the resources.
+ o custom_cfg/custom_data: this is a custom configuration that can be passed
+ while initialising the resources.
+ o bsp_priv: another private poiter.
For MDIO bus The we have:
@@ -180,7 +187,6 @@
o irqs: list of IRQs, one per PHY.
o probed_phy_irq: if irqs is NULL, use this for probed PHY.
-
For DMA engine we have the following internal fields that should be
tuned according to the HW capabilities.
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index a058842..61ce405 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -139,7 +139,9 @@
bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
break;
case 0x4331:
- /* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+ case 43431:
+ /* Ext PA lines must be enabled for tx on BCM4331 */
+ bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
break;
case 43224:
if (bus->chipinfo.rev == 0) {
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index c7f9335..f16f42d3 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -579,13 +579,13 @@
if (!sprom)
return -ENOMEM;
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
pr_debug("SPROM offset 0x%x\n", offset);
bcma_sprom_read(bus, offset, sprom);
- if (bus->chipinfo.id == 0x4331)
+ if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
err = bcma_sprom_valid(sprom);
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 536bda0..8dc84d6 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -686,7 +686,7 @@
*
* We iterate from priv->tx_echo to priv->tx_next and check if the
* packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
*/
static void c_can_do_tx(struct net_device *dev)
{
@@ -698,7 +698,7 @@
for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
msg_obj_no = get_tx_echo_msg_obj(priv);
val = c_can_read_reg32(priv, &priv->regs->txrqst1);
- if (!(val & (1 << msg_obj_no))) {
+ if (!(val & (1 << (msg_obj_no - 1)))) {
can_get_echo_skb(dev,
msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
stats->tx_bytes += priv->read_reg(priv,
@@ -706,6 +706,8 @@
& IF_MCONT_DLC_MASK;
stats->tx_packets++;
c_can_inval_msg_object(dev, 0, msg_obj_no);
+ } else {
+ break;
}
}
@@ -950,7 +952,7 @@
struct net_device *dev = napi->dev;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ irqstatus = priv->irqstatus;
if (!irqstatus)
goto end;
@@ -1028,12 +1030,11 @@
static irqreturn_t c_can_isr(int irq, void *dev_id)
{
- u16 irqstatus;
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
- if (!irqstatus)
+ priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ if (!priv->irqstatus)
return IRQ_NONE;
/* disable all interrupts and schedule the NAPI */
@@ -1063,10 +1064,11 @@
goto exit_irq_fail;
}
+ napi_enable(&priv->napi);
+
/* start the c_can controller */
c_can_start(dev);
- napi_enable(&priv->napi);
netif_start_queue(dev);
return 0;
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b7fbef..5f32d34 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -76,6 +76,7 @@
unsigned int tx_next;
unsigned int tx_echo;
void *priv; /* for board-specific data */
+ u16 irqstatus;
};
struct net_device *alloc_c_can_dev(void);
diff --git a/drivers/net/can/cc770/cc770_platform.c b/drivers/net/can/cc770/cc770_platform.c
index 53115ee..688371c 100644
--- a/drivers/net/can/cc770/cc770_platform.c
+++ b/drivers/net/can/cc770/cc770_platform.c
@@ -154,7 +154,7 @@
struct cc770_platform_data *pdata = pdev->dev.platform_data;
priv->can.clock.freq = pdata->osc_freq;
- if (priv->cpu_interface | CPUIF_DSC)
+ if (priv->cpu_interface & CPUIF_DSC)
priv->can.clock.freq /= 2;
priv->clkout = pdata->cor;
priv->bus_config = pdata->bcr;
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index d863075..905e214 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -258,7 +258,8 @@
* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot change link characteristics when SoL/IDER is active.\n");
return -EINVAL;
}
@@ -1615,7 +1616,8 @@
* PHY loopback cannot be performed if SoL/IDER
* sessions are active
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 026e8b3..a134399 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -709,7 +709,7 @@
* In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
return 0;
/*
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a4b0435..31d37a2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6237,7 +6237,7 @@
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
@@ -6404,7 +6404,7 @@
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 0334d01..b860d4f 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -2155,9 +2155,11 @@
s32 ret_val;
u32 ctrl;
- ret_val = phy->ops.check_reset_block(hw);
- if (ret_val)
- return 0;
+ if (phy->ops.check_reset_block) {
+ ret_val = phy->ops.check_reset_block(hw);
+ if (ret_val)
+ return 0;
+ }
ret_val = phy->ops.acquire(hw);
if (ret_val)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index bf20457..17ad6a3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1390,6 +1390,8 @@
union ixgbe_adv_rx_desc *rx_desc,
struct sk_buff *skb)
{
+ struct net_device *dev = rx_ring->netdev;
+
ixgbe_update_rsc_stats(rx_ring, skb);
ixgbe_rx_hash(rx_ring, rx_desc, skb);
@@ -1401,14 +1403,15 @@
ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector, skb);
#endif
- if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
+ if ((dev->features & NETIF_F_HW_VLAN_RX) &&
+ ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
__vlan_hwaccel_put_tag(skb, vid);
}
skb_record_rx_queue(skb, rx_ring->queue_index);
- skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+ skb->protocol = eth_type_trans(skb, dev);
}
static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector,
@@ -3607,10 +3610,6 @@
if (hw->mac.type == ixgbe_mac_82598EB)
netif_set_gso_max_size(adapter->netdev, 32768);
-
- /* Enable VLAN tag insert/strip */
- adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
-
hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
#ifdef IXGBE_FCOE
@@ -6701,11 +6700,6 @@
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
- features &= ~NETIF_F_HW_VLAN_RX;
-#endif
-
/* return error if RXHASH is being enabled when RSS is not supported */
if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
features &= ~NETIF_F_RXHASH;
@@ -6718,7 +6712,6 @@
if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
features &= ~NETIF_F_LRO;
-
return features;
}
@@ -6766,6 +6759,11 @@
need_reset = true;
}
+ if (features & NETIF_F_HW_VLAN_RX)
+ ixgbe_vlan_strip_enable(adapter);
+ else
+ ixgbe_vlan_strip_disable(adapter);
+
if (changed & NETIF_F_RXALL)
need_reset = true;
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index ec85bf1..770ee55 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -436,7 +436,9 @@
/*
* Hardware-specific parameters.
*/
+#if defined(CONFIG_HAVE_CLK)
struct clk *clk;
+#endif
unsigned int t_clk;
};
@@ -2895,17 +2897,17 @@
mp->dev = dev;
/*
- * Get the clk rate, if there is one, otherwise use the default.
+ * Start with a default rate, and if there is a clock, allow
+ * it to override the default.
*/
+ mp->t_clk = 133000000;
+#if defined(CONFIG_HAVE_CLK)
mp->clk = clk_get(&pdev->dev, (pdev->id ? "1" : "0"));
if (!IS_ERR(mp->clk)) {
clk_prepare_enable(mp->clk);
mp->t_clk = clk_get_rate(mp->clk);
- } else {
- mp->t_clk = 133000000;
- printk(KERN_WARNING "Unable to get clock");
}
-
+#endif
set_params(mp, pd);
netif_set_real_num_tx_queues(dev, mp->txq_count);
netif_set_real_num_rx_queues(dev, mp->rxq_count);
@@ -2995,10 +2997,13 @@
phy_detach(mp->phy);
cancel_work_sync(&mp->tx_timeout_task);
+#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(mp->clk)) {
clk_disable_unprepare(mp->clk);
clk_put(mp->clk);
}
+#endif
+
free_netdev(mp->dev);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 0364283..0076f77 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -13,9 +13,8 @@
if STMMAC_ETH
config STMMAC_PLATFORM
- tristate "STMMAC platform bus support"
+ bool "STMMAC Platform bus support"
depends on STMMAC_ETH
- default y
---help---
This selects the platform specific bus support for
the stmmac device driver. This is the driver used
@@ -26,7 +25,7 @@
If unsure, say N.
config STMMAC_PCI
- tristate "STMMAC support on PCI bus (EXPERIMENTAL)"
+ bool "STMMAC PCI bus support (EXPERIMENTAL)"
depends on STMMAC_ETH && PCI && EXPERIMENTAL
---help---
This is to select the Synopsys DWMAC available on PCI devices,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6b5d060..6d07ba2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -95,7 +95,8 @@
extern void stmmac_set_ethtool_ops(struct net_device *netdev);
extern const struct stmmac_desc_ops enh_desc_ops;
extern const struct stmmac_desc_ops ndesc_ops;
-
+extern struct pci_driver stmmac_pci_driver;
+extern struct platform_driver stmmac_pltfr_driver;
int stmmac_freeze(struct net_device *ndev);
int stmmac_restore(struct net_device *ndev);
int stmmac_resume(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0caae72..8899e10 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -42,6 +42,7 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/prefetch.h>
+#include <linux/pci.h>
#ifdef CONFIG_STMMAC_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -833,8 +834,9 @@
/**
* stmmac_selec_desc_mode
- * @dev : device pointer
- * Description: select the Enhanced/Alternate or Normal descriptors */
+ * @priv : private structure
+ * Description: select the Enhanced/Alternate or Normal descriptors
+ */
static void stmmac_selec_desc_mode(struct stmmac_priv *priv)
{
if (priv->plat->enh_desc) {
@@ -1860,6 +1862,8 @@
/**
* stmmac_dvr_probe
* @device: device pointer
+ * @plat_dat: platform data pointer
+ * @addr: iobase memory address
* Description: this is the main probe function used to
* call the alloc_etherdev, allocate the priv structure.
*/
@@ -2089,6 +2093,30 @@
}
#endif /* CONFIG_PM */
+static int __init stmmac_init(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&stmmac_pltfr_driver);
+
+ if (!err) {
+ err = pci_register_driver(&stmmac_pci_driver);
+ if (err)
+ platform_driver_unregister(&stmmac_pltfr_driver);
+ }
+
+ return err;
+}
+
+static void __exit stmmac_exit(void)
+{
+ pci_unregister_driver(&stmmac_pci_driver);
+ platform_driver_unregister(&stmmac_pltfr_driver);
+}
+
+module_init(stmmac_init);
+module_exit(stmmac_exit);
+
#ifndef MODULE
static int __init stmmac_cmdline_opt(char *str)
{
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 58fab53..cf826e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -179,7 +179,7 @@
MODULE_DEVICE_TABLE(pci, stmmac_id_table);
-static struct pci_driver stmmac_driver = {
+struct pci_driver stmmac_pci_driver = {
.name = STMMAC_RESOURCE_NAME,
.id_table = stmmac_id_table,
.probe = stmmac_pci_probe,
@@ -190,33 +190,6 @@
#endif
};
-/**
- * stmmac_init_module - Entry point for the driver
- * Description: This function is the entry point for the driver.
- */
-static int __init stmmac_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&stmmac_driver);
- if (ret < 0)
- pr_err("%s: ERROR: driver registration failed\n", __func__);
-
- return ret;
-}
-
-/**
- * stmmac_cleanup_module - Cleanup routine for the driver
- * Description: This function is the cleanup routine for the driver.
- */
-static void __exit stmmac_cleanup_module(void)
-{
- pci_unregister_driver(&stmmac_driver);
-}
-
-module_init(stmmac_init_module);
-module_exit(stmmac_cleanup_module);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index df4774d..20eb502 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -255,7 +255,7 @@
};
MODULE_DEVICE_TABLE(of, stmmac_dt_ids);
-static struct platform_driver stmmac_driver = {
+struct platform_driver stmmac_pltfr_driver = {
.probe = stmmac_pltfr_probe,
.remove = stmmac_pltfr_remove,
.driver = {
@@ -266,8 +266,6 @@
},
};
-module_platform_driver(stmmac_driver);
-
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PLATFORM driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 4ffcd57..2857ab07 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -478,6 +478,7 @@
u32 nvsp_version;
atomic_t num_outstanding_sends;
+ wait_queue_head_t wait_drain;
bool start_remove;
bool destroy;
/*
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 4363c76..6cee291 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -42,6 +42,7 @@
if (!net_device)
return NULL;
+ init_waitqueue_head(&net_device->wait_drain);
net_device->start_remove = false;
net_device->destroy = false;
net_device->dev = device;
@@ -387,12 +388,8 @@
spin_unlock_irqrestore(&device->channel->inbound_lock, flags);
/* Wait for all send completions */
- while (atomic_read(&net_device->num_outstanding_sends)) {
- dev_info(&device->device,
- "waiting for %d requests to complete...\n",
- atomic_read(&net_device->num_outstanding_sends));
- udelay(100);
- }
+ wait_event(net_device->wait_drain,
+ atomic_read(&net_device->num_outstanding_sends) == 0);
netvsc_disconnect_vsp(net_device);
@@ -486,6 +483,9 @@
num_outstanding_sends =
atomic_dec_return(&net_device->num_outstanding_sends);
+ if (net_device->destroy && num_outstanding_sends == 0)
+ wake_up(&net_device->wait_drain);
+
if (netif_queue_stopped(ndev) && !net_device->start_remove &&
(hv_ringbuf_avail_percent(&device->channel->outbound)
> RING_AVAIL_PERCENT_HIWATER ||
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 5ac46f5..47f8e89 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -41,6 +41,8 @@
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
+#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
+#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
static int ip175c_config_init(struct phy_device *phydev)
{
@@ -136,6 +138,11 @@
if (c < 0)
return c;
+ /* INTR pin used: speed/link/duplex will cause an interrupt */
+ c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
+ if (c < 0)
+ return c;
+
if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
/* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface */
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 3faef56..d75d1f5 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -946,7 +946,7 @@
}
static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
-static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+static const struct sierra_net_info_data sierra_net_info_data_direct_ip = {
.rx_urb_size = 8 * 1024,
.whitelist = {
.infolen = ARRAY_SIZE(sierra_net_ifnum_list),
@@ -954,7 +954,7 @@
}
};
-static const struct driver_info sierra_net_info_68A3 = {
+static const struct driver_info sierra_net_info_direct_ip = {
.description = "Sierra Wireless USB-to-WWAN Modem",
.flags = FLAG_WWAN | FLAG_SEND_ZLP,
.bind = sierra_net_bind,
@@ -962,12 +962,18 @@
.status = sierra_net_status,
.rx_fixup = sierra_net_rx_fixup,
.tx_fixup = sierra_net_tx_fixup,
- .data = (unsigned long)&sierra_net_info_data_68A3,
+ .data = (unsigned long)&sierra_net_info_data_direct_ip,
};
static const struct usb_device_id products[] = {
{USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
- .driver_info = (unsigned long) &sierra_net_info_68A3},
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
+ {USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+ .driver_info = (unsigned long) &sierra_net_info_direct_ip},
{}, /* last item */
};
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e2480d1..8e7e692 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -89,9 +89,9 @@
data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
- /* redirect, configure ane enable io for interrupt signal */
+ /* redirect, configure and enable io for interrupt signal */
data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
- if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
+ if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
data |= SDIO_SEPINT_ACT_HI;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index d742900..fac67a5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -861,13 +861,18 @@
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
- complete(&drv->request_firmware_complete);
drv->op_mode = iwl_dvm_ops.start(drv->trans, drv->cfg, &drv->fw);
if (!drv->op_mode)
- goto out_free_fw;
+ goto out_unbind;
+ /*
+ * Complete the firmware request last so that
+ * a driver unbind (stop) doesn't run while we
+ * are doing the start() above.
+ */
+ complete(&drv->request_firmware_complete);
return;
try_again:
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 50c5891..b8e2b22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -568,28 +568,28 @@
* iwl_get_max_txpower_avg - get the highest tx power from all chains.
* find the highest tx power from all chains for the channel
*/
-static s8 iwl_get_max_txpower_avg(const struct iwl_cfg *cfg,
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
int element, s8 *max_txpower_in_half_dbm)
{
s8 max_txpower_avg = 0; /* (dBm) */
/* Take the highest tx power from any valid chains */
- if ((cfg->valid_tx_ant & ANT_A) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_A) &&
(enhanced_txpower[element].chain_a_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_a_max;
- if ((cfg->valid_tx_ant & ANT_B) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_B) &&
(enhanced_txpower[element].chain_b_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_b_max;
- if ((cfg->valid_tx_ant & ANT_C) &&
+ if ((priv->hw_params.valid_tx_ant & ANT_C) &&
(enhanced_txpower[element].chain_c_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].chain_c_max;
- if (((cfg->valid_tx_ant == ANT_AB) |
- (cfg->valid_tx_ant == ANT_BC) |
- (cfg->valid_tx_ant == ANT_AC)) &&
+ if (((priv->hw_params.valid_tx_ant == ANT_AB) |
+ (priv->hw_params.valid_tx_ant == ANT_BC) |
+ (priv->hw_params.valid_tx_ant == ANT_AC)) &&
(enhanced_txpower[element].mimo2_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo2_max;
- if ((cfg->valid_tx_ant == ANT_ABC) &&
+ if ((priv->hw_params.valid_tx_ant == ANT_ABC) &&
(enhanced_txpower[element].mimo3_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo3_max;
@@ -691,7 +691,7 @@
((txp->delta_20_in_40 & 0xf0) >> 4),
(txp->delta_20_in_40 & 0x0f));
- max_txp_avg = iwl_get_max_txpower_avg(priv->cfg, txp_array, idx,
+ max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
&max_txp_avg_halfdbm);
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index ab2f4d75..3ee23134 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -199,6 +199,7 @@
WIPHY_FLAG_DISABLE_BEACON_HINTS |
WIPHY_FLAG_IBSS_RSN;
+#ifdef CONFIG_PM_SLEEP
if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
priv->trans->ops->wowlan_suspend &&
device_can_wakeup(priv->trans->dev)) {
@@ -217,6 +218,7 @@
hw->wiphy->wowlan.pattern_max_len =
IWLAGN_WOWLAN_MAX_PATTERN_LEN;
}
+#endif
if (iwlwifi_mod_params.power_save)
hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
@@ -249,6 +251,7 @@
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+ iwl_leds_exit(priv);
return ret;
}
priv->mac80211_registered = 1;
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index fb787df..4c9336c 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1721,6 +1721,24 @@
"unregister family %i\n", ret);
}
+static const struct ieee80211_iface_limit hwsim_if_limits[] = {
+ { .max = 1, .types = BIT(NL80211_IFTYPE_ADHOC) },
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) },
+};
+
+static const struct ieee80211_iface_combination hwsim_if_comb = {
+ .limits = hwsim_if_limits,
+ .n_limits = ARRAY_SIZE(hwsim_if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
+
static int __init init_mac80211_hwsim(void)
{
int i, err = 0;
@@ -1782,6 +1800,9 @@
hw->wiphy->n_addresses = 2;
hw->wiphy->addresses = data->addresses;
+ hw->wiphy->iface_combinations = &hwsim_if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
if (fake_hw_scan) {
hw->wiphy->max_scan_ssids = 255;
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 42c1af9..510397b 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -948,6 +948,19 @@
bss_cfg->ssid.ssid_len = params->ssid_len;
}
+ switch (params->hidden_ssid) {
+ case NL80211_HIDDEN_SSID_NOT_IN_USE:
+ bss_cfg->bcast_ssid_ctl = 1;
+ break;
+ case NL80211_HIDDEN_SSID_ZERO_LEN:
+ bss_cfg->bcast_ssid_ctl = 0;
+ break;
+ case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+ /* firmware doesn't support this type of hidden SSID */
+ default:
+ return -EINVAL;
+ }
+
if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
kfree(bss_cfg);
wiphy_err(wiphy, "Failed to parse secuirty parameters!\n");
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 9f674bb..561452a 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -122,6 +122,7 @@
#define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42)
#define TLV_TYPE_UAP_BEACON_PERIOD (PROPRIETARY_TLV_BASE_ID + 44)
#define TLV_TYPE_UAP_DTIM_PERIOD (PROPRIETARY_TLV_BASE_ID + 45)
+#define TLV_TYPE_UAP_BCAST_SSID (PROPRIETARY_TLV_BASE_ID + 48)
#define TLV_TYPE_UAP_RTS_THRESHOLD (PROPRIETARY_TLV_BASE_ID + 51)
#define TLV_TYPE_UAP_WPA_PASSPHRASE (PROPRIETARY_TLV_BASE_ID + 60)
#define TLV_TYPE_UAP_ENCRY_PROTOCOL (PROPRIETARY_TLV_BASE_ID + 64)
@@ -1209,6 +1210,11 @@
u8 ssid[0];
} __packed;
+struct host_cmd_tlv_bcast_ssid {
+ struct host_cmd_tlv tlv;
+ u8 bcast_ctl;
+} __packed;
+
struct host_cmd_tlv_beacon_period {
struct host_cmd_tlv tlv;
__le16 period;
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 76dfbc4..8173ab6 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -132,6 +132,7 @@
struct host_cmd_tlv_dtim_period *dtim_period;
struct host_cmd_tlv_beacon_period *beacon_period;
struct host_cmd_tlv_ssid *ssid;
+ struct host_cmd_tlv_bcast_ssid *bcast_ssid;
struct host_cmd_tlv_channel_band *chan_band;
struct host_cmd_tlv_frag_threshold *frag_threshold;
struct host_cmd_tlv_rts_threshold *rts_threshold;
@@ -153,6 +154,14 @@
cmd_size += sizeof(struct host_cmd_tlv) +
bss_cfg->ssid.ssid_len;
tlv += sizeof(struct host_cmd_tlv) + bss_cfg->ssid.ssid_len;
+
+ bcast_ssid = (struct host_cmd_tlv_bcast_ssid *)tlv;
+ bcast_ssid->tlv.type = cpu_to_le16(TLV_TYPE_UAP_BCAST_SSID);
+ bcast_ssid->tlv.len =
+ cpu_to_le16(sizeof(bcast_ssid->bcast_ctl));
+ bcast_ssid->bcast_ctl = bss_cfg->bcast_ssid_ctl;
+ cmd_size += sizeof(struct host_cmd_tlv_bcast_ssid);
+ tlv += sizeof(struct host_cmd_tlv_bcast_ssid);
}
if (bss_cfg->channel && bss_cfg->channel <= MAX_CHANNEL_BAND_BG) {
chan_band = (struct host_cmd_tlv_channel_band *)tlv;
@@ -416,6 +425,7 @@
if (!bss_cfg)
return -ENOMEM;
+ mwifiex_set_sys_config_invalid_data(bss_cfg);
bss_cfg->band_cfg = BAND_CONFIG_MANUAL;
bss_cfg->channel = channel;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ca36ccc..8f75402 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -396,8 +396,7 @@
* for hardware which doesn't support hardware
* sequence counting.
*/
- spinlock_t seqlock;
- u16 seqno;
+ atomic_t seqno;
};
static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index b49773e..dd24b26 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -277,7 +277,6 @@
else
rt2x00dev->intf_sta_count++;
- spin_lock_init(&intf->seqlock);
mutex_init(&intf->beacon_skb_mutex);
intf->beacon = entry;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4c662ec..2fd8301 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -207,6 +207,7 @@
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
+ u16 seqno;
if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
return;
@@ -238,15 +239,13 @@
* sequence counting per-frame, since those will override the
* sequence counter given by mac80211.
*/
- spin_lock(&intf->seqlock);
-
if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
- intf->seqno += 0x10;
+ seqno = atomic_add_return(0x10, &intf->seqno);
+ else
+ seqno = atomic_read(&intf->seqno);
+
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
- hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-
- spin_unlock(&intf->seqlock);
-
+ hdr->seq_ctrl |= cpu_to_le16(seqno);
}
static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index b94765e..2040bff 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -40,7 +40,10 @@
u32 pmtu_orig;
u32 pmtu_learned;
struct inetpeer_addr_base redirect_learned;
- struct list_head gc_list;
+ union {
+ struct list_head gc_list;
+ struct rcu_head gc_rcu;
+ };
/*
* Once inet_peer is queued for deletion (refcnt == -1), following fields
* are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 46e7f86..3e18af4 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -210,7 +210,7 @@
}
if (sk->sk_state == BT_CONNECTED || !newsock ||
- test_bit(BT_DEFER_SETUP, &bt_sk(parent)->flags)) {
+ test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags)) {
bt_accept_unlink(sk);
if (newsock)
sock_graft(sk, newsock);
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index ea5fb9f..d23b668 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -36,9 +36,6 @@
#define TRACE_ON 1
#define TRACE_OFF 0
-static void send_dm_alert(struct work_struct *unused);
-
-
/*
* Globals, our netlink socket pointer
* and the work handle that will send up
@@ -48,11 +45,10 @@
static DEFINE_MUTEX(trace_state_mutex);
struct per_cpu_dm_data {
- struct work_struct dm_alert_work;
- struct sk_buff __rcu *skb;
- atomic_t dm_hit_count;
- struct timer_list send_timer;
- int cpu;
+ spinlock_t lock;
+ struct sk_buff *skb;
+ struct work_struct dm_alert_work;
+ struct timer_list send_timer;
};
struct dm_hw_stat_delta {
@@ -78,13 +74,13 @@
static unsigned long dm_hw_check_delta = 2*HZ;
static LIST_HEAD(hw_stats_list);
-static void reset_per_cpu_data(struct per_cpu_dm_data *data)
+static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
{
size_t al;
struct net_dm_alert_msg *msg;
struct nlattr *nla;
struct sk_buff *skb;
- struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1);
+ unsigned long flags;
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
@@ -99,65 +95,40 @@
sizeof(struct net_dm_alert_msg));
msg = nla_data(nla);
memset(msg, 0, al);
- } else
- schedule_work_on(data->cpu, &data->dm_alert_work);
-
- /*
- * Don't need to lock this, since we are guaranteed to only
- * run this on a single cpu at a time.
- * Note also that we only update data->skb if the old and new skb
- * pointers don't match. This ensures that we don't continually call
- * synchornize_rcu if we repeatedly fail to alloc a new netlink message.
- */
- if (skb != oskb) {
- rcu_assign_pointer(data->skb, skb);
-
- synchronize_rcu();
-
- atomic_set(&data->dm_hit_count, dm_hit_limit);
+ } else {
+ mod_timer(&data->send_timer, jiffies + HZ / 10);
}
+ spin_lock_irqsave(&data->lock, flags);
+ swap(data->skb, skb);
+ spin_unlock_irqrestore(&data->lock, flags);
+
+ return skb;
}
-static void send_dm_alert(struct work_struct *unused)
+static void send_dm_alert(struct work_struct *work)
{
struct sk_buff *skb;
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data;
- WARN_ON_ONCE(data->cpu != smp_processor_id());
+ data = container_of(work, struct per_cpu_dm_data, dm_alert_work);
- /*
- * Grab the skb we're about to send
- */
- skb = rcu_dereference_protected(data->skb, 1);
+ skb = reset_per_cpu_data(data);
- /*
- * Replace it with a new one
- */
- reset_per_cpu_data(data);
-
- /*
- * Ship it!
- */
if (skb)
genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL);
-
- put_cpu_var(dm_cpu_data);
}
/*
* This is the timer function to delay the sending of an alert
* in the event that more drops will arrive during the
- * hysteresis period. Note that it operates under the timer interrupt
- * so we don't need to disable preemption here
+ * hysteresis period.
*/
-static void sched_send_work(unsigned long unused)
+static void sched_send_work(unsigned long _data)
{
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data = (struct per_cpu_dm_data *)_data;
- schedule_work_on(smp_processor_id(), &data->dm_alert_work);
-
- put_cpu_var(dm_cpu_data);
+ schedule_work(&data->dm_alert_work);
}
static void trace_drop_common(struct sk_buff *skb, void *location)
@@ -167,33 +138,28 @@
struct nlattr *nla;
int i;
struct sk_buff *dskb;
- struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data);
+ struct per_cpu_dm_data *data;
+ unsigned long flags;
-
- rcu_read_lock();
- dskb = rcu_dereference(data->skb);
+ local_irq_save(flags);
+ data = &__get_cpu_var(dm_cpu_data);
+ spin_lock(&data->lock);
+ dskb = data->skb;
if (!dskb)
goto out;
- if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) {
- /*
- * we're already at zero, discard this hit
- */
- goto out;
- }
-
nlh = (struct nlmsghdr *)dskb->data;
nla = genlmsg_data(nlmsg_data(nlh));
msg = nla_data(nla);
for (i = 0; i < msg->entries; i++) {
if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
msg->points[i].count++;
- atomic_inc(&data->dm_hit_count);
goto out;
}
}
-
+ if (msg->entries == dm_hit_limit)
+ goto out;
/*
* We need to create a new entry
*/
@@ -205,13 +171,11 @@
if (!timer_pending(&data->send_timer)) {
data->send_timer.expires = jiffies + dm_delay * HZ;
- add_timer_on(&data->send_timer, smp_processor_id());
+ add_timer(&data->send_timer);
}
out:
- rcu_read_unlock();
- put_cpu_var(dm_cpu_data);
- return;
+ spin_unlock_irqrestore(&data->lock, flags);
}
static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb, void *location)
@@ -418,11 +382,11 @@
for_each_possible_cpu(cpu) {
data = &per_cpu(dm_cpu_data, cpu);
- data->cpu = cpu;
INIT_WORK(&data->dm_alert_work, send_dm_alert);
init_timer(&data->send_timer);
- data->send_timer.data = cpu;
+ data->send_timer.data = (unsigned long)data;
data->send_timer.function = sched_send_work;
+ spin_lock_init(&data->lock);
reset_per_cpu_data(data);
}
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index d4d61b6..dfba343 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -560,6 +560,17 @@
}
EXPORT_SYMBOL(inet_peer_xrlim_allow);
+static void inetpeer_inval_rcu(struct rcu_head *head)
+{
+ struct inet_peer *p = container_of(head, struct inet_peer, gc_rcu);
+
+ spin_lock_bh(&gc_lock);
+ list_add_tail(&p->gc_list, &gc_list);
+ spin_unlock_bh(&gc_lock);
+
+ schedule_delayed_work(&gc_work, gc_delay);
+}
+
void inetpeer_invalidate_tree(int family)
{
struct inet_peer *old, *new, *prev;
@@ -576,10 +587,7 @@
prev = cmpxchg(&base->root, old, new);
if (prev == old) {
base->total = 0;
- spin_lock(&gc_lock);
- list_add_tail(&prev->gc_list, &gc_list);
- spin_unlock(&gc_lock);
- schedule_delayed_work(&gc_work, gc_delay);
+ call_rcu(&prev->gc_rcu, inetpeer_inval_rcu);
}
out:
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 26ddb69..c649188 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -145,15 +145,20 @@
struct tid_ampdu_rx *tid_rx;
unsigned long timeout;
+ rcu_read_lock();
tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[*ptid]);
- if (!tid_rx)
+ if (!tid_rx) {
+ rcu_read_unlock();
return;
+ }
timeout = tid_rx->last_rx + TU_TO_JIFFIES(tid_rx->timeout);
if (time_is_after_jiffies(timeout)) {
mod_timer(&tid_rx->session_timer, timeout);
+ rcu_read_unlock();
return;
}
+ rcu_read_unlock();
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 495831e..e9cecca 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -533,16 +533,16 @@
sinfo.filled = 0;
sta_set_sinfo(sta, &sinfo);
- if (sinfo.filled | STATION_INFO_TX_BITRATE)
+ if (sinfo.filled & STATION_INFO_TX_BITRATE)
data[i] = 100000 *
cfg80211_calculate_bitrate(&sinfo.txrate);
i++;
- if (sinfo.filled | STATION_INFO_RX_BITRATE)
+ if (sinfo.filled & STATION_INFO_RX_BITRATE)
data[i] = 100000 *
cfg80211_calculate_bitrate(&sinfo.rxrate);
i++;
- if (sinfo.filled | STATION_INFO_SIGNAL_AVG)
+ if (sinfo.filled & STATION_INFO_SIGNAL_AVG)
data[i] = (u8)sinfo.signal_avg;
i++;
} else {
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d4c19a7..8664111 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -637,6 +637,18 @@
ieee80211_configure_filter(local);
break;
default:
+ mutex_lock(&local->mtx);
+ if (local->hw_roc_dev == sdata->dev &&
+ local->hw_roc_channel) {
+ /* ignore return value since this is racy */
+ drv_cancel_remain_on_channel(local);
+ ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+ }
+ mutex_unlock(&local->mtx);
+
+ flush_work(&local->hw_roc_start);
+ flush_work(&local->hw_roc_done);
+
flush_work(&sdata->work);
/*
* When we get here, the interface is marked down.
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 04c3063..d94627c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1220,6 +1220,22 @@
sdata->vif.bss_conf.qos = true;
}
+static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+ lockdep_assert_held(&sdata->local->mtx);
+
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ ieee80211_run_deferred_scan(sdata->local);
+}
+
+static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
+{
+ mutex_lock(&sdata->local->mtx);
+ __ieee80211_stop_poll(sdata);
+ mutex_unlock(&sdata->local->mtx);
+}
+
static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
u16 capab, bool erp_valid, u8 erp)
{
@@ -1285,8 +1301,7 @@
sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
/* just to be sure */
- sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ ieee80211_stop_poll(sdata);
ieee80211_led_assoc(local, 1);
@@ -1456,8 +1471,7 @@
return;
}
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ __ieee80211_stop_poll(sdata);
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
@@ -1477,7 +1491,6 @@
round_jiffies_up(jiffies +
IEEE80211_CONNECTION_IDLE_TIME));
out:
- ieee80211_run_deferred_scan(local);
mutex_unlock(&local->mtx);
}
@@ -2408,7 +2421,11 @@
net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n",
sdata->name);
#endif
+ mutex_lock(&local->mtx);
ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
+ ieee80211_run_deferred_scan(local);
+ mutex_unlock(&local->mtx);
+
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
@@ -2595,8 +2612,7 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[DEAUTH_DISASSOC_LEN];
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
+ ieee80211_stop_poll(sdata);
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
false, frame_buf);
@@ -2874,8 +2890,7 @@
u32 flags;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL);
+ __ieee80211_stop_poll(sdata);
/* let's probe the connection once */
flags = sdata->local->hw.flags;
@@ -2944,7 +2959,10 @@
if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
add_timer(&ifmgd->chswitch_timer);
ieee80211_sta_reset_beacon_monitor(sdata);
+
+ mutex_lock(&sdata->local->mtx);
ieee80211_restart_sta_timer(sdata);
+ mutex_unlock(&sdata->local->mtx);
}
#endif
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index f054e94..935aa4b 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -234,6 +234,22 @@
return;
}
+ /* was never transmitted */
+ if (local->hw_roc_skb) {
+ u64 cookie;
+
+ cookie = local->hw_roc_cookie ^ 2;
+
+ cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie,
+ local->hw_roc_skb->data,
+ local->hw_roc_skb->len, false,
+ GFP_KERNEL);
+
+ kfree_skb(local->hw_roc_skb);
+ local->hw_roc_skb = NULL;
+ local->hw_roc_skb_for_status = NULL;
+ }
+
if (!local->hw_roc_for_tx)
cfg80211_remain_on_channel_expired(local->hw_roc_dev,
local->hw_roc_cookie,
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index f5b1638..de455f8 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -378,7 +378,7 @@
/* make the station visible */
sta_info_hash_add(local, sta);
- list_add(&sta->list, &local->sta_list);
+ list_add_rcu(&sta->list, &local->sta_list);
set_sta_flag(sta, WLAN_STA_INSERTED);
@@ -688,7 +688,7 @@
if (ret)
return ret;
- list_del(&sta->list);
+ list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
for (i = 0; i < NUM_DEFAULT_KEYS; i++)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 847215b..e453212 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1737,7 +1737,7 @@
__le16 fc;
struct ieee80211_hdr hdr;
struct ieee80211s_hdr mesh_hdr __maybe_unused;
- struct mesh_path __maybe_unused *mppath = NULL;
+ struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL;
const u8 *encaps_data;
int encaps_len, skip_header_bytes;
int nh_pos, h_pos;
@@ -1803,8 +1803,11 @@
goto fail;
}
rcu_read_lock();
- if (!is_multicast_ether_addr(skb->data))
- mppath = mpp_path_lookup(skb->data, sdata);
+ if (!is_multicast_ether_addr(skb->data)) {
+ mpath = mesh_path_lookup(skb->data, sdata);
+ if (!mpath)
+ mppath = mpp_path_lookup(skb->data, sdata);
+ }
/*
* Use address extension if it is a packet from
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index a44c680..8dd4712 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1271,7 +1271,7 @@
enum ieee80211_sta_state state;
for (state = IEEE80211_STA_NOTEXIST;
- state < sta->sta_state - 1; state++)
+ state < sta->sta_state; state++)
WARN_ON(drv_sta_state(local, sta->sdata, sta,
state, state + 1));
}
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index d2a19b0..89baa33 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -42,6 +42,7 @@
cfg80211_hold_bss(bss_from_pub(bss));
wdev->current_bss = bss_from_pub(bss);
+ wdev->sme_state = CFG80211_SME_CONNECTED;
cfg80211_upload_connect_keys(wdev);
nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
@@ -60,7 +61,7 @@
struct cfg80211_event *ev;
unsigned long flags;
- CFG80211_DEV_WARN_ON(!wdev->ssid_len);
+ CFG80211_DEV_WARN_ON(wdev->sme_state != CFG80211_SME_CONNECTING);
ev = kzalloc(sizeof(*ev), gfp);
if (!ev)
@@ -115,9 +116,11 @@
#ifdef CONFIG_CFG80211_WEXT
wdev->wext.ibss.channel = params->channel;
#endif
+ wdev->sme_state = CFG80211_SME_CONNECTING;
err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
if (err) {
wdev->connect_keys = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
return err;
}
@@ -169,6 +172,7 @@
}
wdev->current_bss = NULL;
+ wdev->sme_state = CFG80211_SME_IDLE;
wdev->ssid_len = 0;
#ifdef CONFIG_CFG80211_WEXT
if (!nowext)
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 55d9946..8f2d68f 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -935,6 +935,7 @@
enum nl80211_iftype iftype)
{
struct wireless_dev *wdev_iter;
+ u32 used_iftypes = BIT(iftype);
int num[NUM_NL80211_IFTYPES];
int total = 1;
int i, j;
@@ -961,6 +962,7 @@
num[wdev_iter->iftype]++;
total++;
+ used_iftypes |= BIT(wdev_iter->iftype);
}
mutex_unlock(&rdev->devlist_mtx);
@@ -970,6 +972,7 @@
for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
const struct ieee80211_iface_combination *c;
struct ieee80211_iface_limit *limits;
+ u32 all_iftypes = 0;
c = &rdev->wiphy.iface_combinations[i];
@@ -984,6 +987,7 @@
if (rdev->wiphy.software_iftypes & BIT(iftype))
continue;
for (j = 0; j < c->n_limits; j++) {
+ all_iftypes |= limits[j].types;
if (!(limits[j].types & BIT(iftype)))
continue;
if (limits[j].max < num[iftype])
@@ -991,7 +995,20 @@
limits[j].max -= num[iftype];
}
}
- /* yay, it fits */
+
+ /*
+ * Finally check that all iftypes that we're currently
+ * using are actually part of this combination. If they
+ * aren't then we can't use this combination and have
+ * to continue to the next.
+ */
+ if ((all_iftypes & used_iftypes) != used_iftypes)
+ goto cont;
+
+ /*
+ * This combination covered all interface types and
+ * supported the requested numbers, so we're good.
+ */
kfree(limits);
return 0;
cont: