diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 89de753..cbccf9a 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_PM)	+= sysfs.o
-obj-$(CONFIG_PM_SLEEP)	+= main.o
+obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_OPS)	+= generic_ops.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 941fcb8..5419a49 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -59,6 +59,7 @@
 {
 	dev->power.status = DPM_ON;
 	init_completion(&dev->power.completion);
+	dev->power.wakeup_count = 0;
 	pm_runtime_init(dev);
 }
 
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index a4c33bc..81d344e 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -73,6 +73,8 @@
  *	device are known to the PM core.  However, for some devices this
  *	attribute is set to "enabled" by bus type code or device drivers and in
  *	that cases it should be safe to leave the default value.
+ *
+ *	wakeup_count - Report the number of wakeup events related to the device
  */
 
 static const char enabled[] = "enabled";
@@ -144,6 +146,16 @@
 
 static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
 
+#ifdef CONFIG_PM_SLEEP
+static ssize_t wakeup_count_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", dev->power.wakeup_count);
+}
+
+static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
+#endif
+
 #ifdef CONFIG_PM_ADVANCED_DEBUG
 #ifdef CONFIG_PM_RUNTIME
 
@@ -230,6 +242,9 @@
 	&dev_attr_control.attr,
 #endif
 	&dev_attr_wakeup.attr,
+#ifdef CONFIG_PM_SLEEP
+	&dev_attr_wakeup_count.attr,
+#endif
 #ifdef CONFIG_PM_ADVANCED_DEBUG
 	&dev_attr_async.attr,
 #ifdef CONFIG_PM_RUNTIME
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
new file mode 100644
index 0000000..2559907
--- /dev/null
+++ b/drivers/base/power/wakeup.c
@@ -0,0 +1,229 @@
+/*
+ * drivers/base/power/wakeup.c - System wakeup events framework
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/capability.h>
+#include <linux/suspend.h>
+#include <linux/pm.h>
+
+/*
+ * If set, the suspend/hibernate code will abort transitions to a sleep state
+ * if wakeup events are registered during or immediately before the transition.
+ */
+bool events_check_enabled;
+
+/* The counter of registered wakeup events. */
+static unsigned long event_count;
+/* A preserved old value of event_count. */
+static unsigned long saved_event_count;
+/* The counter of wakeup events being processed. */
+static unsigned long events_in_progress;
+
+static DEFINE_SPINLOCK(events_lock);
+
+/*
+ * The functions below use the observation that each wakeup event starts a
+ * period in which the system should not be suspended.  The moment this period
+ * will end depends on how the wakeup event is going to be processed after being
+ * detected and all of the possible cases can be divided into two distinct
+ * groups.
+ *
+ * First, a wakeup event may be detected by the same functional unit that will
+ * carry out the entire processing of it and possibly will pass it to user space
+ * for further processing.  In that case the functional unit that has detected
+ * the event may later "close" the "no suspend" period associated with it
+ * directly as soon as it has been dealt with.  The pair of pm_stay_awake() and
+ * pm_relax(), balanced with each other, is supposed to be used in such
+ * situations.
+ *
+ * Second, a wakeup event may be detected by one functional unit and processed
+ * by another one.  In that case the unit that has detected it cannot really
+ * "close" the "no suspend" period associated with it, unless it knows in
+ * advance what's going to happen to the event during processing.  This
+ * knowledge, however, may not be available to it, so it can simply specify time
+ * to wait before the system can be suspended and pass it as the second
+ * argument of pm_wakeup_event().
+ */
+
+/**
+ * pm_stay_awake - Notify the PM core that a wakeup event is being processed.
+ * @dev: Device the wakeup event is related to.
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) by incrementing the
+ * counter of wakeup events being processed.  If @dev is not NULL, the counter
+ * of wakeup events related to @dev is incremented too.
+ *
+ * Call this function after detecting of a wakeup event if pm_relax() is going
+ * to be called directly after processing the event (and possibly passing it to
+ * user space for further processing).
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_stay_awake(struct device *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (dev)
+		dev->power.wakeup_count++;
+
+	events_in_progress++;
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_relax - Notify the PM core that processing of a wakeup event has ended.
+ *
+ * Notify the PM core that a wakeup event has been processed by decrementing
+ * the counter of wakeup events being processed and incrementing the counter
+ * of registered wakeup events.
+ *
+ * Call this function for wakeup events whose processing started with calling
+ * pm_stay_awake().
+ *
+ * It is safe to call it from interrupt context.
+ */
+void pm_relax(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_in_progress) {
+		events_in_progress--;
+		event_count++;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_wakeup_work_fn - Deferred closing of a wakeup event.
+ *
+ * Execute pm_relax() for a wakeup event detected in the past and free the
+ * work item object used for queuing up the work.
+ */
+static void pm_wakeup_work_fn(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+
+	pm_relax();
+	kfree(dwork);
+}
+
+/**
+ * pm_wakeup_event - Notify the PM core of a wakeup event.
+ * @dev: Device the wakeup event is related to.
+ * @msec: Anticipated event processing time (in milliseconds).
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) that will take
+ * approximately @msec milliseconds to be processed by the kernel.  Increment
+ * the counter of wakeup events being processed and queue up a work item
+ * that will execute pm_relax() for the event after @msec milliseconds.  If @dev
+ * is not NULL, the counter of wakeup events related to @dev is incremented too.
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_wakeup_event(struct device *dev, unsigned int msec)
+{
+	unsigned long flags;
+	struct delayed_work *dwork;
+
+	dwork = msec ? kzalloc(sizeof(*dwork), GFP_ATOMIC) : NULL;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (dev)
+		dev->power.wakeup_count++;
+
+	if (dwork) {
+		INIT_DELAYED_WORK(dwork, pm_wakeup_work_fn);
+		schedule_delayed_work(dwork, msecs_to_jiffies(msec));
+
+		events_in_progress++;
+	} else {
+		event_count++;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_check_wakeup_events - Check for new wakeup events.
+ *
+ * Compare the current number of registered wakeup events with its preserved
+ * value from the past to check if new wakeup events have been registered since
+ * the old value was stored.  Check if the current number of wakeup events being
+ * processed is zero.
+ */
+bool pm_check_wakeup_events(void)
+{
+	unsigned long flags;
+	bool ret = true;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_check_enabled) {
+		ret = (event_count == saved_event_count) && !events_in_progress;
+		events_check_enabled = ret;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+	return ret;
+}
+
+/**
+ * pm_get_wakeup_count - Read the number of registered wakeup events.
+ * @count: Address to store the value at.
+ *
+ * Store the number of registered wakeup events at the address in @count.  Block
+ * if the current number of wakeup events being processed is nonzero.
+ *
+ * Return false if the wait for the number of wakeup events being processed to
+ * drop down to zero has been interrupted by a signal (and the current number
+ * of wakeup events being processed is still nonzero).  Otherwise return true.
+ */
+bool pm_get_wakeup_count(unsigned long *count)
+{
+	bool ret;
+
+	spin_lock_irq(&events_lock);
+	if (capable(CAP_SYS_ADMIN))
+		events_check_enabled = false;
+
+	while (events_in_progress && !signal_pending(current)) {
+		spin_unlock_irq(&events_lock);
+
+		schedule_timeout_interruptible(msecs_to_jiffies(100));
+
+		spin_lock_irq(&events_lock);
+	}
+	*count = event_count;
+	ret = !events_in_progress;
+	spin_unlock_irq(&events_lock);
+	return ret;
+}
+
+/**
+ * pm_save_wakeup_count - Save the current number of registered wakeup events.
+ * @count: Value to compare with the current number of registered wakeup events.
+ *
+ * If @count is equal to the current number of registered wakeup events and the
+ * current number of wakeup events being processed is zero, store @count as the
+ * old number of registered wakeup events to be used by pm_check_wakeup_events()
+ * and return true.  Otherwise return false.
+ */
+bool pm_save_wakeup_count(unsigned long count)
+{
+	bool ret = false;
+
+	spin_lock_irq(&events_lock);
+	if (count == event_count && !events_in_progress) {
+		saved_event_count = count;
+		events_check_enabled = true;
+		ret = true;
+	}
+	spin_unlock_irq(&events_lock);
+	return ret;
+}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 2e7a3bf..1ab98bb 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -48,6 +48,7 @@
 	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
 		pci_check_pme_status(pci_dev);
 		pm_runtime_resume(&pci_dev->dev);
+		pci_wakeup_event(pci_dev);
 		if (pci_dev->subordinate)
 			pci_pme_wakeup_bus(pci_dev->subordinate);
 	}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 740fb4e..130ed1d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1275,6 +1275,22 @@
 	return ret;
 }
 
+/*
+ * Time to wait before the system can be put into a sleep state after reporting
+ * a wakeup event signaled by a PCI device.
+ */
+#define PCI_WAKEUP_COOLDOWN	100
+
+/**
+ * pci_wakeup_event - Report a wakeup event related to a given PCI device.
+ * @dev: Device to report the wakeup event for.
+ */
+void pci_wakeup_event(struct pci_dev *dev)
+{
+	if (device_may_wakeup(&dev->dev))
+		pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN);
+}
+
 /**
  * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
  * @dev: Device to handle.
@@ -1285,8 +1301,10 @@
  */
 static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
 {
-	if (pci_check_pme_status(dev))
+	if (pci_check_pme_status(dev)) {
 		pm_request_resume(&dev->dev);
+		pci_wakeup_event(dev);
+	}
 	return 0;
 }
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f8077b3..c8b7fd0 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -56,6 +56,7 @@
 extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern bool pci_check_pme_status(struct pci_dev *dev);
 extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern void pci_wakeup_event(struct pci_dev *dev);
 extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
 extern void pci_pme_wakeup_bus(struct pci_bus *bus);
 extern void pci_pm_init(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
index d672a0a..bbdea18 100644
--- a/drivers/pci/pcie/pme/pcie_pme.c
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -154,6 +154,7 @@
 		/* Skip PCIe devices in case we started from a root port. */
 		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
 			pm_request_resume(&dev->dev);
+			pci_wakeup_event(dev);
 			ret = true;
 		}
 
@@ -254,8 +255,10 @@
 	if (found) {
 		/* The device is there, but we have to check its PME status. */
 		found = pci_check_pme_status(dev);
-		if (found)
+		if (found) {
 			pm_request_resume(&dev->dev);
+			pci_wakeup_event(dev);
+		}
 		pci_dev_put(dev);
 	} else if (devfn) {
 		/*