| /* |
| * KLSI KL5KUSB105 chip RS232 converter driver |
| * |
| * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> |
| * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * All information about the device was acquired using SniffUSB ans snoopUSB |
| * on Windows98. |
| * It was written out of frustration with the PalmConnect USB Serial adapter |
| * sold by Palm Inc. |
| * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided |
| * information that was not already available. |
| * |
| * It seems that KLSI bought some silicon-design information from ScanLogic, |
| * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. |
| * KLSI has firmware available for their devices; it is probable that the |
| * firmware differs from that used by KLSI in their products. If you have an |
| * original KLSI device and can provide some information on it, I would be |
| * most interested in adding support for it here. If you have any information |
| * on the protocol used (or find errors in my reverse-engineered stuff), please |
| * let me know. |
| * |
| * The code was only tested with a PalmConnect USB adapter; if you |
| * are adventurous, try it with any KLSI-based device and let me know how it |
| * breaks so that I can fix it! |
| */ |
| |
| /* TODO: |
| * check modem line signals |
| * implement handshaking or decide that we do not support it |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/tty_driver.h> |
| #include <linux/tty_flip.h> |
| #include <linux/module.h> |
| #include <linux/uaccess.h> |
| #include <asm/unaligned.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| #include "kl5kusb105.h" |
| |
| #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>" |
| #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver" |
| |
| |
| /* |
| * Function prototypes |
| */ |
| static int klsi_105_port_probe(struct usb_serial_port *port); |
| static int klsi_105_port_remove(struct usb_serial_port *port); |
| static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); |
| static void klsi_105_close(struct usb_serial_port *port); |
| static void klsi_105_set_termios(struct tty_struct *tty, |
| struct usb_serial_port *port, struct ktermios *old); |
| static int klsi_105_tiocmget(struct tty_struct *tty); |
| static int klsi_105_tiocmset(struct tty_struct *tty, |
| unsigned int set, unsigned int clear); |
| static void klsi_105_process_read_urb(struct urb *urb); |
| static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, |
| void *dest, size_t size); |
| |
| /* |
| * All of the device info needed for the KLSI converters. |
| */ |
| static const struct usb_device_id id_table[] = { |
| { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, |
| { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) }, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| static struct usb_serial_driver kl5kusb105d_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "kl5kusb105d", |
| }, |
| .description = "KL5KUSB105D / PalmConnect", |
| .id_table = id_table, |
| .num_ports = 1, |
| .bulk_out_size = 64, |
| .open = klsi_105_open, |
| .close = klsi_105_close, |
| .set_termios = klsi_105_set_termios, |
| /*.break_ctl = klsi_105_break_ctl,*/ |
| .tiocmget = klsi_105_tiocmget, |
| .tiocmset = klsi_105_tiocmset, |
| .port_probe = klsi_105_port_probe, |
| .port_remove = klsi_105_port_remove, |
| .throttle = usb_serial_generic_throttle, |
| .unthrottle = usb_serial_generic_unthrottle, |
| .process_read_urb = klsi_105_process_read_urb, |
| .prepare_write_buffer = klsi_105_prepare_write_buffer, |
| }; |
| |
| static struct usb_serial_driver * const serial_drivers[] = { |
| &kl5kusb105d_device, NULL |
| }; |
| |
| struct klsi_105_port_settings { |
| __u8 pktlen; /* always 5, it seems */ |
| __u8 baudrate; |
| __u8 databits; |
| __u8 unknown1; |
| __u8 unknown2; |
| } __attribute__ ((packed)); |
| |
| struct klsi_105_private { |
| struct klsi_105_port_settings cfg; |
| struct ktermios termios; |
| unsigned long line_state; /* modem line settings */ |
| spinlock_t lock; |
| }; |
| |
| |
| /* |
| * Handle vendor specific USB requests |
| */ |
| |
| |
| #define KLSI_TIMEOUT 5000 /* default urb timeout */ |
| |
| static int klsi_105_chg_port_settings(struct usb_serial_port *port, |
| struct klsi_105_port_settings *settings) |
| { |
| int rc; |
| |
| rc = usb_control_msg(port->serial->dev, |
| usb_sndctrlpipe(port->serial->dev, 0), |
| KL5KUSB105A_SIO_SET_DATA, |
| USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, |
| 0, /* value */ |
| 0, /* index */ |
| settings, |
| sizeof(struct klsi_105_port_settings), |
| KLSI_TIMEOUT); |
| if (rc < 0) |
| dev_err(&port->dev, |
| "Change port settings failed (error = %d)\n", rc); |
| dev_info(&port->serial->dev->dev, |
| "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n", |
| settings->pktlen, settings->baudrate, settings->databits, |
| settings->unknown1, settings->unknown2); |
| return rc; |
| } |
| |
| /* translate a 16-bit status value from the device to linux's TIO bits */ |
| static unsigned long klsi_105_status2linestate(const __u16 status) |
| { |
| unsigned long res = 0; |
| |
| res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) |
| | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0) |
| ; |
| |
| return res; |
| } |
| |
| /* |
| * Read line control via vendor command and return result through |
| * *line_state_p |
| */ |
| /* It seems that the status buffer has always only 2 bytes length */ |
| #define KLSI_STATUSBUF_LEN 2 |
| static int klsi_105_get_line_state(struct usb_serial_port *port, |
| unsigned long *line_state_p) |
| { |
| int rc; |
| u8 *status_buf; |
| __u16 status; |
| |
| dev_info(&port->serial->dev->dev, "sending SIO Poll request\n"); |
| |
| status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); |
| if (!status_buf) { |
| dev_err(&port->dev, "%s - out of memory for status buffer.\n", |
| __func__); |
| return -ENOMEM; |
| } |
| status_buf[0] = 0xff; |
| status_buf[1] = 0xff; |
| rc = usb_control_msg(port->serial->dev, |
| usb_rcvctrlpipe(port->serial->dev, 0), |
| KL5KUSB105A_SIO_POLL, |
| USB_TYPE_VENDOR | USB_DIR_IN, |
| 0, /* value */ |
| 0, /* index */ |
| status_buf, KLSI_STATUSBUF_LEN, |
| 10000 |
| ); |
| if (rc < 0) |
| dev_err(&port->dev, "Reading line status failed (error = %d)\n", |
| rc); |
| else { |
| status = get_unaligned_le16(status_buf); |
| |
| dev_info(&port->serial->dev->dev, "read status %x %x", |
| status_buf[0], status_buf[1]); |
| |
| *line_state_p = klsi_105_status2linestate(status); |
| } |
| |
| kfree(status_buf); |
| return rc; |
| } |
| |
| |
| /* |
| * Driver's tty interface functions |
| */ |
| |
| static int klsi_105_port_probe(struct usb_serial_port *port) |
| { |
| struct klsi_105_private *priv; |
| |
| priv = kmalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| /* set initial values for control structures */ |
| priv->cfg.pktlen = 5; |
| priv->cfg.baudrate = kl5kusb105a_sio_b9600; |
| priv->cfg.databits = kl5kusb105a_dtb_8; |
| priv->cfg.unknown1 = 0; |
| priv->cfg.unknown2 = 1; |
| |
| priv->line_state = 0; |
| |
| spin_lock_init(&priv->lock); |
| |
| /* priv->termios is left uninitialized until port opening */ |
| |
| usb_set_serial_port_data(port, priv); |
| |
| return 0; |
| } |
| |
| static int klsi_105_port_remove(struct usb_serial_port *port) |
| { |
| struct klsi_105_private *priv; |
| |
| priv = usb_get_serial_port_data(port); |
| kfree(priv); |
| |
| return 0; |
| } |
| |
| static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) |
| { |
| struct klsi_105_private *priv = usb_get_serial_port_data(port); |
| int retval = 0; |
| int rc; |
| int i; |
| unsigned long line_state; |
| struct klsi_105_port_settings *cfg; |
| unsigned long flags; |
| |
| /* Do a defined restart: |
| * Set up sane default baud rate and send the 'READ_ON' |
| * vendor command. |
| * FIXME: set modem line control (how?) |
| * Then read the modem line control and store values in |
| * priv->line_state. |
| */ |
| cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) { |
| dev_err(&port->dev, "%s - out of memory for config buffer.\n", |
| __func__); |
| return -ENOMEM; |
| } |
| cfg->pktlen = 5; |
| cfg->baudrate = kl5kusb105a_sio_b9600; |
| cfg->databits = kl5kusb105a_dtb_8; |
| cfg->unknown1 = 0; |
| cfg->unknown2 = 1; |
| klsi_105_chg_port_settings(port, cfg); |
| |
| /* set up termios structure */ |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->termios.c_iflag = tty->termios.c_iflag; |
| priv->termios.c_oflag = tty->termios.c_oflag; |
| priv->termios.c_cflag = tty->termios.c_cflag; |
| priv->termios.c_lflag = tty->termios.c_lflag; |
| for (i = 0; i < NCCS; i++) |
| priv->termios.c_cc[i] = tty->termios.c_cc[i]; |
| priv->cfg.pktlen = cfg->pktlen; |
| priv->cfg.baudrate = cfg->baudrate; |
| priv->cfg.databits = cfg->databits; |
| priv->cfg.unknown1 = cfg->unknown1; |
| priv->cfg.unknown2 = cfg->unknown2; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* READ_ON and urb submission */ |
| rc = usb_serial_generic_open(tty, port); |
| if (rc) { |
| retval = rc; |
| goto exit; |
| } |
| |
| rc = usb_control_msg(port->serial->dev, |
| usb_sndctrlpipe(port->serial->dev, 0), |
| KL5KUSB105A_SIO_CONFIGURE, |
| USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, |
| KL5KUSB105A_SIO_CONFIGURE_READ_ON, |
| 0, /* index */ |
| NULL, |
| 0, |
| KLSI_TIMEOUT); |
| if (rc < 0) { |
| dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); |
| retval = rc; |
| } else |
| dev_dbg(&port->dev, "%s - enabled reading\n", __func__); |
| |
| rc = klsi_105_get_line_state(port, &line_state); |
| if (rc >= 0) { |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_state = line_state; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); |
| retval = 0; |
| } else |
| retval = rc; |
| |
| exit: |
| kfree(cfg); |
| return retval; |
| } |
| |
| static void klsi_105_close(struct usb_serial_port *port) |
| { |
| int rc; |
| |
| mutex_lock(&port->serial->disc_mutex); |
| if (!port->serial->disconnected) { |
| /* send READ_OFF */ |
| rc = usb_control_msg(port->serial->dev, |
| usb_sndctrlpipe(port->serial->dev, 0), |
| KL5KUSB105A_SIO_CONFIGURE, |
| USB_TYPE_VENDOR | USB_DIR_OUT, |
| KL5KUSB105A_SIO_CONFIGURE_READ_OFF, |
| 0, /* index */ |
| NULL, 0, |
| KLSI_TIMEOUT); |
| if (rc < 0) |
| dev_err(&port->dev, |
| "Disabling read failed (error = %d)\n", rc); |
| } |
| mutex_unlock(&port->serial->disc_mutex); |
| |
| /* shutdown our bulk reads and writes */ |
| usb_serial_generic_close(port); |
| |
| /* wgg - do I need this? I think so. */ |
| usb_kill_urb(port->interrupt_in_urb); |
| } |
| |
| /* We need to write a complete 64-byte data block and encode the |
| * number actually sent in the first double-byte, LSB-order. That |
| * leaves at most 62 bytes of payload. |
| */ |
| #define KLSI_HDR_LEN 2 |
| static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, |
| void *dest, size_t size) |
| { |
| unsigned char *buf = dest; |
| int count; |
| |
| count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, |
| &port->lock); |
| put_unaligned_le16(count, buf); |
| |
| return count + KLSI_HDR_LEN; |
| } |
| |
| /* The data received is preceded by a length double-byte in LSB-first order. |
| */ |
| static void klsi_105_process_read_urb(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| unsigned char *data = urb->transfer_buffer; |
| struct tty_struct *tty; |
| unsigned len; |
| |
| /* empty urbs seem to happen, we ignore them */ |
| if (!urb->actual_length) |
| return; |
| |
| if (urb->actual_length <= KLSI_HDR_LEN) { |
| dev_dbg(&port->dev, "%s - malformed packet\n", __func__); |
| return; |
| } |
| |
| tty = tty_port_tty_get(&port->port); |
| if (!tty) |
| return; |
| |
| len = get_unaligned_le16(data); |
| if (len > urb->actual_length - KLSI_HDR_LEN) { |
| dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); |
| len = urb->actual_length - KLSI_HDR_LEN; |
| } |
| |
| tty_insert_flip_string(tty, data + KLSI_HDR_LEN, len); |
| tty_flip_buffer_push(tty); |
| tty_kref_put(tty); |
| } |
| |
| static void klsi_105_set_termios(struct tty_struct *tty, |
| struct usb_serial_port *port, |
| struct ktermios *old_termios) |
| { |
| struct klsi_105_private *priv = usb_get_serial_port_data(port); |
| struct device *dev = &port->dev; |
| unsigned int iflag = tty->termios.c_iflag; |
| unsigned int old_iflag = old_termios->c_iflag; |
| unsigned int cflag = tty->termios.c_cflag; |
| unsigned int old_cflag = old_termios->c_cflag; |
| struct klsi_105_port_settings *cfg; |
| unsigned long flags; |
| speed_t baud; |
| |
| cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) { |
| dev_err(dev, "%s - out of memory for config buffer.\n", __func__); |
| return; |
| } |
| |
| /* lock while we are modifying the settings */ |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* |
| * Update baud rate |
| */ |
| baud = tty_get_baud_rate(tty); |
| |
| if ((cflag & CBAUD) != (old_cflag & CBAUD)) { |
| /* reassert DTR and (maybe) RTS on transition from B0 */ |
| if ((old_cflag & CBAUD) == B0) { |
| dev_dbg(dev, "%s: baud was B0\n", __func__); |
| #if 0 |
| priv->control_state |= TIOCM_DTR; |
| /* don't set RTS if using hardware flow control */ |
| if (!(old_cflag & CRTSCTS)) |
| priv->control_state |= TIOCM_RTS; |
| mct_u232_set_modem_ctrl(serial, priv->control_state); |
| #endif |
| } |
| } |
| switch (baud) { |
| case 0: /* handled below */ |
| break; |
| case 1200: |
| priv->cfg.baudrate = kl5kusb105a_sio_b1200; |
| break; |
| case 2400: |
| priv->cfg.baudrate = kl5kusb105a_sio_b2400; |
| break; |
| case 4800: |
| priv->cfg.baudrate = kl5kusb105a_sio_b4800; |
| break; |
| case 9600: |
| priv->cfg.baudrate = kl5kusb105a_sio_b9600; |
| break; |
| case 19200: |
| priv->cfg.baudrate = kl5kusb105a_sio_b19200; |
| break; |
| case 38400: |
| priv->cfg.baudrate = kl5kusb105a_sio_b38400; |
| break; |
| case 57600: |
| priv->cfg.baudrate = kl5kusb105a_sio_b57600; |
| break; |
| case 115200: |
| priv->cfg.baudrate = kl5kusb105a_sio_b115200; |
| break; |
| default: |
| dev_dbg(dev, "KLSI USB->Serial converter: unsupported baudrate request, using default of 9600"); |
| priv->cfg.baudrate = kl5kusb105a_sio_b9600; |
| baud = 9600; |
| break; |
| } |
| if ((cflag & CBAUD) == B0) { |
| dev_dbg(dev, "%s: baud is B0\n", __func__); |
| /* Drop RTS and DTR */ |
| /* maybe this should be simulated by sending read |
| * disable and read enable messages? |
| */ |
| ; |
| #if 0 |
| priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); |
| mct_u232_set_modem_ctrl(serial, priv->control_state); |
| #endif |
| } |
| tty_encode_baud_rate(tty, baud, baud); |
| |
| if ((cflag & CSIZE) != (old_cflag & CSIZE)) { |
| /* set the number of data bits */ |
| switch (cflag & CSIZE) { |
| case CS5: |
| dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| goto err; |
| case CS6: |
| dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| goto err; |
| case CS7: |
| priv->cfg.databits = kl5kusb105a_dtb_7; |
| break; |
| case CS8: |
| priv->cfg.databits = kl5kusb105a_dtb_8; |
| break; |
| default: |
| dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n"); |
| priv->cfg.databits = kl5kusb105a_dtb_8; |
| break; |
| } |
| } |
| |
| /* |
| * Update line control register (LCR) |
| */ |
| if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) |
| || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { |
| /* Not currently supported */ |
| tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB); |
| #if 0 |
| priv->last_lcr = 0; |
| |
| /* set the parity */ |
| if (cflag & PARENB) |
| priv->last_lcr |= (cflag & PARODD) ? |
| MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; |
| else |
| priv->last_lcr |= MCT_U232_PARITY_NONE; |
| |
| /* set the number of stop bits */ |
| priv->last_lcr |= (cflag & CSTOPB) ? |
| MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; |
| |
| mct_u232_set_line_ctrl(serial, priv->last_lcr); |
| #endif |
| ; |
| } |
| /* |
| * Set flow control: well, I do not really now how to handle DTR/RTS. |
| * Just do what we have seen with SniffUSB on Win98. |
| */ |
| if ((iflag & IXOFF) != (old_iflag & IXOFF) |
| || (iflag & IXON) != (old_iflag & IXON) |
| || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { |
| /* Not currently supported */ |
| tty->termios.c_cflag &= ~CRTSCTS; |
| /* Drop DTR/RTS if no flow control otherwise assert */ |
| #if 0 |
| if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) |
| priv->control_state |= TIOCM_DTR | TIOCM_RTS; |
| else |
| priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); |
| mct_u232_set_modem_ctrl(serial, priv->control_state); |
| #endif |
| ; |
| } |
| memcpy(cfg, &priv->cfg, sizeof(*cfg)); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* now commit changes to device */ |
| klsi_105_chg_port_settings(port, cfg); |
| err: |
| kfree(cfg); |
| } |
| |
| #if 0 |
| static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct usb_serial *serial = port->serial; |
| struct mct_u232_private *priv = |
| (struct mct_u232_private *)port->private; |
| unsigned char lcr = priv->last_lcr; |
| |
| dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state); |
| |
| /* LOCKING */ |
| if (break_state) |
| lcr |= MCT_U232_SET_BREAK; |
| |
| mct_u232_set_line_ctrl(serial, lcr); |
| } |
| #endif |
| |
| static int klsi_105_tiocmget(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct klsi_105_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| int rc; |
| unsigned long line_state; |
| |
| rc = klsi_105_get_line_state(port, &line_state); |
| if (rc < 0) { |
| dev_err(&port->dev, |
| "Reading line control failed (error = %d)\n", rc); |
| /* better return value? EAGAIN? */ |
| return rc; |
| } |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| priv->line_state = line_state; |
| spin_unlock_irqrestore(&priv->lock, flags); |
| dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); |
| return (int)line_state; |
| } |
| |
| static int klsi_105_tiocmset(struct tty_struct *tty, |
| unsigned int set, unsigned int clear) |
| { |
| int retval = -EINVAL; |
| |
| /* if this ever gets implemented, it should be done something like this: |
| struct usb_serial *serial = port->serial; |
| struct klsi_105_private *priv = usb_get_serial_port_data(port); |
| unsigned long flags; |
| int control; |
| |
| spin_lock_irqsave (&priv->lock, flags); |
| if (set & TIOCM_RTS) |
| priv->control_state |= TIOCM_RTS; |
| if (set & TIOCM_DTR) |
| priv->control_state |= TIOCM_DTR; |
| if (clear & TIOCM_RTS) |
| priv->control_state &= ~TIOCM_RTS; |
| if (clear & TIOCM_DTR) |
| priv->control_state &= ~TIOCM_DTR; |
| control = priv->control_state; |
| spin_unlock_irqrestore (&priv->lock, flags); |
| retval = mct_u232_set_modem_ctrl(serial, control); |
| */ |
| return retval; |
| } |
| |
| module_usb_serial_driver(serial_drivers, id_table); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |