drivers/block/floppy.c: comment neatening and remove naked ;
Spacing, column alignment and a for loop with
a naked semicolon converted to an assign and while
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 7c0c7d0..48aefd9 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1262,9 +1262,12 @@
default:
DPRINT("Invalid data rate for perpendicular mode!\n");
cont->done(0);
- FDCS->reset = 1; /* convenient way to return to
- * redo without to much hassle (deep
- * stack et al. */
+ FDCS->reset = 1;
+ /*
+ * convenient way to return to
+ * redo without too much hassle
+ * (deep stack et al.)
+ */
return;
}
} else
@@ -1977,8 +1980,8 @@
#endif
if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
disk_change(current_drive) && !DP->select_delay)
- twaddle(); /* this clears the dcl on certain drive/controller
- * combinations */
+ twaddle(); /* this clears the dcl on certain
+ * drive/controller combinations */
#ifdef fd_chose_dma_mode
if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
@@ -2806,15 +2809,14 @@
((CT(COMMAND) == FD_READ ||
(!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
- max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
- /* not enough space */
- ) {
+ max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+ /* not enough space */
buffer_track = -1;
buffer_drive = current_drive;
buffer_max = buffer_min = aligned_sector_t;
}
raw_cmd->kernel_data = floppy_track_buffer +
- ((aligned_sector_t - buffer_min) << 9);
+ ((aligned_sector_t - buffer_min) << 9);
if (CT(COMMAND) == FD_WRITE) {
/* copy write buffer to track buffer.
@@ -3171,11 +3173,12 @@
COPYOUT(*ptr);
param += sizeof(struct floppy_raw_cmd);
if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
- if (ptr->length >= 0
- && ptr->length <= ptr->buffer_length)
- ECALL(fd_copyout
- (ptr->data, ptr->kernel_data,
- ptr->buffer_length - ptr->length));
+ if (ptr->length >= 0 &&
+ ptr->length <= ptr->buffer_length) {
+ long length = ptr->buffer_length - ptr->length;
+ ECALL(fd_copyout(ptr->data, ptr->kernel_data,
+ length));
+ }
}
ptr = ptr->next;
}
@@ -3827,8 +3830,7 @@
* a disk in the drive, and whether that disk is writable.
*/
-static void floppy_rb0_complete(struct bio *bio,
- int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
{
complete((struct completion *)bio->bi_private);
}
@@ -4120,9 +4122,9 @@
else
param = config_params[i].def_param;
if (config_params[i].fn)
- config_params[i].
- fn(ints, param,
- config_params[i].param2);
+ config_params[i].fn(ints, param,
+ config_params[i].
+ param2);
if (config_params[i].var) {
DPRINT("%s=%d\n", str, param);
*config_params[i].var = param;
@@ -4180,8 +4182,8 @@
static struct platform_driver floppy_driver = {
.driver = {
- .name = "floppy",
- .pm = &floppy_pm_ops,
+ .name = "floppy",
+ .pm = &floppy_pm_ops,
},
};
@@ -4429,8 +4431,10 @@
const struct io_region *p;
for (p = io_regions; p < ARRAY_END(io_regions); p++) {
- if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+ if (!request_region(FDCS->address + p->offset,
+ p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n",
+ FDCS->address + p->offset);
floppy_release_allocated_regions(fdc, p);
return -EBUSY;
}
@@ -4586,8 +4590,9 @@
char *ptr;
while (*cfg) {
- for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++)
- ;
+ ptr = cfg;
+ while (*cfg && *cfg != ' ' && *cfg != '\t')
+ cfg++;
if (*cfg) {
*cfg = '\0';
cfg++;