diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f232941..1cf999a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -18,6 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
@@ -28,48 +29,6 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-static void vic_ack_irq(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	irq &= 31;
-	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-	/* moreover, clear the soft-triggered, in case it was the reason */
-	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	irq &= 31;
-	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	irq &= 31;
-	writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
-	int i;
-
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
 #if defined(CONFIG_PM)
 /**
  * struct vic_device - VIC PM device
@@ -99,13 +58,34 @@
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
+static int vic_id;
+
 static inline struct vic_device *to_vic(struct sys_device *sys)
 {
 	return container_of(sys, struct vic_device, sysdev);
 }
+#endif /* CONFIG_PM */
 
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
 
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
 static int vic_class_resume(struct sys_device *dev)
 {
 	struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@
 };
 
 /**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
-	struct vic_device *v;
-
-	if (vic_id >= ARRAY_SIZE(vic_devices))
-		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-	else {
-		v = &vic_devices[vic_id];
-		v->base = base;
-		v->resume_sources = resume_sources;
-		v->irq = irq;
-		vic_id++;
-	}
-}
-
-/**
  * vic_pm_init - initicall to register VIC pm
  *
  * This is called via late_initcall() to register
@@ -219,9 +174,60 @@
 
 	return 0;
 }
-
 late_initcall(vic_pm_init);
 
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
 static struct vic_device *vic_from_irq(unsigned int irq)
 {
         struct vic_device *v = vic_devices;
@@ -255,10 +261,7 @@
 
 	return 0;
 }
-
 #else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
 #define vic_set_wake NULL
 #endif /* CONFIG_PM */
 
@@ -270,80 +273,6 @@
 	.set_wake = vic_set_wake,
 };
 
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
-			 u32 vic_sources);
-
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources, u32 resume_sources)
-{
-	unsigned int i;
-	u32 cellid = 0;
-	enum amba_vendor vendor;
-
-	/* Identify which VIC cell this one is, by reading the ID */
-	for (i = 0; i < 4; i++) {
-		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
-		cellid |= (readl(addr) & 0xff) << (8 * i);
-	}
-	vendor = (cellid >> 12) & 0xff;
-	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
-	       base, cellid, vendor);
-
-	switch(vendor) {
-	case AMBA_VENDOR_ST:
-		vik_init_st(base, irq_start, vic_sources);
-		return;
-	default:
-		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
-		/* fall through */
-	case AMBA_VENDOR_ARM:
-		break;
-	}
-
-	/* Disable all interrupts initially. */
-
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
-
-	/*
-	 * Make sure we clear all existing interrupts
-	 */
-	writel(0, base + VIC_PL190_VECT_ADDR);
-	for (i = 0; i < 19; i++) {
-		unsigned int value;
-
-		value = readl(base + VIC_PL190_VECT_ADDR);
-		writel(value, base + VIC_PL190_VECT_ADDR);
-	}
-
-	vic_init2(base);
-
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			set_irq_chip(irq, &vic_chip);
-			set_irq_chip_data(irq, base);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-
-	vic_pm_register(base, irq_start, resume_sources);
-}
-
 /*
  * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
  * The original cell has 32 interrupts, while the modified one has 64,
@@ -351,7 +280,7 @@
  * the probe function is called twice, with base set to offset 000
  *  and 020 within the page. We call this "second block".
  */
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 				u32 vic_sources)
 {
 	unsigned int i;
@@ -400,3 +329,73 @@
 		}
 	}
 }
+
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+		     u32 vic_sources, u32 resume_sources)
+{
+	unsigned int i;
+	u32 cellid = 0;
+	enum amba_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case AMBA_VENDOR_ST:
+		vic_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case AMBA_VENDOR_ARM:
+		break;
+	}
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts
+	 */
+	writel(0, base + VIC_PL190_VECT_ADDR);
+	for (i = 0; i < 19; i++) {
+		unsigned int value;
+
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
+	}
+
+	vic_init2(base);
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+
+	vic_pm_register(base, irq_start, resume_sources);
+}