ARM: ep93xx: remove memory configuration options
The ARM_PATCH_PHYS_VIRT option makes the ep93xx memory configuration
options obsolete.
This allows support for all the ep93xx variations to be built into a
single kernel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 00623a2..d504acc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -268,7 +268,6 @@
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_EBSA110 || \
- EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
ARCH_IOP13XX || \
@@ -277,10 +276,7 @@
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
- default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
- default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
- default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
- default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ default 0xc0000000 if ARCH_SA1100
help
Please provide the physical address corresponding to the
location of main memory in your system.
@@ -419,7 +415,9 @@
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
select ARM_VIC
+ select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM920T
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index bec570a..61a75ca 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -15,45 +15,8 @@
comment "EP93xx Platforms"
-choice
- prompt "EP93xx first SDRAM bank selection"
- default EP93XX_SDCE3_SYNC_PHYS_OFFSET
-
-config EP93XX_SDCE3_SYNC_PHYS_OFFSET
- bool "0x00000000 - SDCE3/SyncBoot"
- help
- Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0x00000000.
-
-config EP93XX_SDCE0_PHYS_OFFSET
- bool "0xc0000000 - SDCEO"
- help
- Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xc0000000.
-
-config EP93XX_SDCE1_PHYS_OFFSET
- bool "0xd0000000 - SDCE1"
- help
- Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xd0000000.
-
-config EP93XX_SDCE2_PHYS_OFFSET
- bool "0xe0000000 - SDCE2"
- help
- Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xe0000000.
-
-config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
- bool "0xf0000000 - SDCE3/AsyncBoot"
- help
- Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xf0000000.
-
-endchoice
-
config MACH_ADSSPHERE
bool "Support ADS Sphere"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
@@ -63,7 +26,6 @@
config MACH_EDB9301
bool "Support Cirrus Logic EDB9301"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -71,7 +33,6 @@
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -79,7 +40,6 @@
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
- depends on EP93XX_SDCE0_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -87,7 +47,6 @@
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -95,7 +54,6 @@
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
- depends on EP93XX_SDCE0_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -103,7 +61,6 @@
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -111,7 +68,6 @@
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
@@ -119,14 +75,12 @@
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
- depends on EP93XX_SDCE0_PHYS_OFFSET
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
config MACH_GESBC9312
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
@@ -137,7 +91,6 @@
config MACH_MICRO9H
bool "Support Contec Micro9-High"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
@@ -145,7 +98,6 @@
config MACH_MICRO9M
bool "Support Contec Micro9-Mid"
- depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
@@ -153,7 +105,6 @@
config MACH_MICRO9L
bool "Support Contec Micro9-Lite"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
@@ -161,7 +112,6 @@
config MACH_MICRO9S
bool "Support Contec Micro9-Slim"
- depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
@@ -169,28 +119,24 @@
config MACH_SIM_ONE
bool "Support Simplemachines Sim.One board"
- depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
- depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the Bluewater
Systems Snapper CL15 Module.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
config MACH_VISION_EP9307
bool "Support Vision Engraving Systems EP9307 SoM"
- depends on EP93XX_SDCE0_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Vision Engraving Systems EP9307 SoM.
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d3113a7..ed82ed7 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,14 +1 @@
- zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) += 0x00008000
-params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
-
- zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) += 0xc0008000
-params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
-
- zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) += 0xd0008000
-params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
-
- zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) += 0xe0008000
-params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
-
- zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) += 0xf0008000
-params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.