Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (36 commits)
[PATCH] hwmon: add required idr locking
[PATCH] I2C: hwmon: Rename register parameters
[PATCH] I2C: Drop unneeded i2c-dev.h includes
[PATCH] I2C: i2c-ixp4xx: Add hwmon class
[PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support
[PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization
[PATCH] I2C: i2c-ali1535: Drop redundant mutex
[PATCH] i2c: Cleanup isp1301_omap
[PATCH] i2c: Fix i2c-ite name initialization
[PATCH] i2c: Drop the i2c-frodo bus driver
[PATCH] i2c: Optimize core_lists mutex usage
[PATCH] w83781d: Don't reset the chip by default
[PATCH] w83781d: Document the alarm and beep bits
[PATCH] w83627ehf: Refactor the sysfs interface
[PATCH] hwmon: Support the Pentium M VID code
[PATCH] hwmon: Add support for the Winbond W83687THF
[PATCH] hwmon: f71805f semaphore to mutex conversions
[PATCH] hwmon: Semaphore to mutex conversions
[PATCH] i2c: Semaphore to mutex conversions, part 3
[PATCH] i2c: Semaphore to mutex conversions, part 2
...
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index bbeaba6..7922319 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -18,6 +18,10 @@
Prefix: 'w83637hf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
+ * Winbond W83687THF
+ Prefix: 'w83687thf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Provided by Winbond on request
Authors:
Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index e545933..b1e9f80 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -36,6 +36,11 @@
Use 'init=0' to bypass initializing the chip.
Try this if your computer crashes when you load the module.
+* reset int
+ (default 0)
+ The driver used to reset the chip on load, but does no more. Use
+ 'reset=1' to restore the old behavior. Report if you need to do this.
+
force_subclients=bus,caddr,saddr,saddr
This is used to force the i2c addresses for subclients of
a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b'
@@ -123,6 +128,25 @@
your computer speaker. It is possible to enable all beeping globally,
or only the beeping for some alarms.
+Individual alarm and beep bits:
+
+0x000001: in0
+0x000002: in1
+0x000004: in2
+0x000008: in3
+0x000010: temp1
+0x000020: temp2 (+temp3 on W83781D)
+0x000040: fan1
+0x000080: fan2
+0x000100: in4
+0x000200: in5
+0x000400: in6
+0x000800: fan3
+0x001000: chassis
+0x002000: temp3 (W83782D and W83627HF only)
+0x010000: in7 (W83782D and W83627HF only)
+0x020000: in8 (W83782D and W83627HF only)
+
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
already have disappeared! Note that in the current implementation, all
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index 856b4b8..a1c8f58 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -4,7 +4,7 @@
* Intel 82371AB PIIX4 and PIIX4E
* Intel 82443MX (440MX)
Datasheet: Publicly available at the Intel website
- * ServerWorks OSB4, CSB5 and CSB6 southbridges
+ * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges
Datasheet: Only available via NDA from ServerWorks
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb
index 08c8cd1..f50e699 100644
--- a/Documentation/i2c/busses/scx200_acb
+++ b/Documentation/i2c/busses/scx200_acb
@@ -6,9 +6,10 @@
-----------------
* base: int
- Base addresses for the ACCESS.bus controllers
+ Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
Description
-----------
-Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+Enable the use of the ACCESS.bus controller on the Geode SCx200 and
+SC1100 processors and the CS5535 and CS5536 Geode companion devices.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7230d4e..99cdc61 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -406,13 +406,14 @@
will be called w83l785ts.
config SENSORS_W83627HF
- tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
- depends on HWMON && I2C && EXPERIMENTAL
+ tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on HWMON && I2C
select I2C_ISA
select HWMON_VID
help
If you say yes here you get support for the Winbond W836X7 series
- of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
+ of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
+ W83697HF.
This driver can also be built as a module. If so, the module
will be called w83627hf.
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 6656127..2b6e74d 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
@@ -92,7 +93,7 @@
struct class_device *class_dev;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -162,10 +163,10 @@
struct adm1021_data *data = i2c_get_clientdata(client); \
int temp = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = TEMP_TO_REG(temp); \
adm1021_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
set(temp_max, ADM1021_REG_TOS_W);
@@ -275,7 +276,7 @@
strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -351,7 +352,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct adm1021_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -375,7 +376,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 9331c56..a4c859c 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -53,6 +53,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -133,7 +134,7 @@
struct adm1025_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -207,11 +208,11 @@
struct adm1025_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
data->in_min[offset]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
} \
static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
@@ -221,11 +222,11 @@
struct adm1025_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
data->in_max[offset]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
} \
static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
@@ -247,11 +248,11 @@
struct adm1025_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->temp_min[offset-1] = TEMP_TO_REG(val); \
i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
data->temp_min[offset-1]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
} \
static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
@@ -261,11 +262,11 @@
struct adm1025_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->temp_max[offset-1] = TEMP_TO_REG(val); \
i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
data->temp_max[offset-1]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
} \
static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
@@ -404,7 +405,7 @@
/* We can fill in the remaining client fields */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -523,7 +524,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct adm1025_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int i;
@@ -558,7 +559,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index fefe6e7..6d4f8b8 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -32,6 +32,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -260,10 +261,10 @@
struct adm1026_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
int valid; /* !=0 if following fields are valid */
unsigned long last_reading; /* In jiffies */
unsigned long last_config; /* In jiffies */
@@ -298,9 +299,8 @@
static int adm1026_detect(struct i2c_adapter *adapter, int address,
int kind);
static int adm1026_detach_client(struct i2c_client *client);
-static int adm1026_read_value(struct i2c_client *client, u8 register);
-static int adm1026_write_value(struct i2c_client *client, u8 register,
- int value);
+static int adm1026_read_value(struct i2c_client *client, u8 reg);
+static int adm1026_write_value(struct i2c_client *client, u8 reg, int value);
static void adm1026_print_gpio(struct i2c_client *client);
static void adm1026_fixup_gpio(struct i2c_client *client);
static struct adm1026_data *adm1026_update_device(struct device *dev);
@@ -575,7 +575,7 @@
int i;
long value, alarms, gpio;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!data->valid
|| time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
/* Things that change quickly */
@@ -710,7 +710,7 @@
dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
data->vid = (data->gpio >> 11) & 0x1f;
data->valid = 1;
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
@@ -739,10 +739,10 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = INS_TO_REG(nr, val);
adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
@@ -762,10 +762,10 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = INS_TO_REG(nr, val);
adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -813,10 +813,10 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf)
@@ -831,10 +831,10 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET);
adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -874,11 +874,11 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]);
adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr),
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -939,7 +939,7 @@
if (new_div == 0) {
return -EINVAL;
}
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
orig_div = data->fan_div[nr];
data->fan_div[nr] = DIV_FROM_REG(new_div);
@@ -958,7 +958,7 @@
if (data->fan_div[nr] != orig_div) {
fixup_fan_min(dev,nr,orig_div);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1001,11 +1001,11 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr],
data->temp_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
@@ -1025,11 +1025,11 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr],
data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1064,11 +1064,11 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_offset[nr] = TEMP_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr],
data->temp_offset[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1115,11 +1115,11 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_tmin[nr] = TEMP_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr],
data->temp_tmin[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1150,11 +1150,11 @@
int val = simple_strtol(buf, NULL, 10);
if ((val == 1) || (val==0)) {
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4);
adm1026_write_value(client, ADM1026_REG_CONFIG1,
data->config1);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
return count;
}
@@ -1184,11 +1184,11 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_crit[nr] = TEMP_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr],
data->temp_crit[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1212,10 +1212,10 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->analog_out = DAC_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1267,7 +1267,7 @@
int val = simple_strtol(buf, NULL, 10);
unsigned long mask;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->alarm_mask = val & 0x7fffffff;
mask = data->alarm_mask
| (data->gpio_mask & 0x10000 ? 0x80000000 : 0);
@@ -1282,7 +1282,7 @@
mask >>= 8;
adm1026_write_value(client, ADM1026_REG_MASK4,
mask & 0xff);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1303,7 +1303,7 @@
int val = simple_strtol(buf, NULL, 10);
long gpio;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->gpio = val & 0x1ffff;
gpio = data->gpio;
adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff);
@@ -1311,7 +1311,7 @@
adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff);
gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f);
adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1331,7 +1331,7 @@
int val = simple_strtol(buf, NULL, 10);
long mask;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->gpio_mask = val & 0x1ffff;
mask = data->gpio_mask;
adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff);
@@ -1339,7 +1339,7 @@
adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff);
mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f);
adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1359,10 +1359,10 @@
if (data->pwm1.enable == 1) {
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm1.pwm = PWM_TO_REG(val);
adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
return count;
}
@@ -1378,14 +1378,14 @@
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255);
if (data->pwm1.enable == 2) { /* apply immediately */
data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1406,7 +1406,7 @@
int old_enable;
if ((val >= 0) && (val < 3)) {
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
old_enable = data->pwm1.enable;
data->pwm1.enable = val;
data->config1 = (data->config1 & ~CFG1_PWM_AFC)
@@ -1424,7 +1424,7 @@
adm1026_write_value(client, ADM1026_REG_PWM,
data->pwm1.pwm);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
return count;
}
@@ -1541,7 +1541,7 @@
/* Fill in the remaining client fields */
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index d063979..3bf2da6 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -28,6 +28,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Following macros takes channel parameter starting from 0 to 2 */
#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr))
@@ -70,7 +71,7 @@
struct adm1031_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
int chip_type;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -262,10 +263,10 @@
old_fan_mode = data->conf1;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, ®))) {
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return ret;
}
if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^
@@ -288,7 +289,7 @@
}
data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -329,11 +330,11 @@
struct adm1031_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
data->auto_temp[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
@@ -349,11 +350,11 @@
struct adm1031_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -405,11 +406,11 @@
int val = simple_strtol(buf, NULL, 10);
int reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) &&
(((val>>4) & 0xf) != 5)) {
/* In automatic mode, the only PWM accepted is 33% */
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
data->pwm[nr] = PWM_TO_REG(val);
@@ -417,7 +418,7 @@
adm1031_write_value(client, ADM1031_REG_PWM,
nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
: (data->pwm[nr] & 0xf) | (reg & 0xf0));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -511,7 +512,7 @@
struct adm1031_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (val) {
data->fan_min[nr] =
FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
@@ -519,7 +520,7 @@
data->fan_min[nr] = 0xff;
}
adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
@@ -540,7 +541,7 @@
if (tmp == 0xff)
return -EINVAL;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
new_min = data->fan_min[nr] * old_div /
@@ -553,7 +554,7 @@
data->fan_div[nr]);
adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr),
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -627,11 +628,11 @@
val = simple_strtol(buf, NULL, 10);
val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
data->temp_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
@@ -643,11 +644,11 @@
val = simple_strtol(buf, NULL, 10);
val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
@@ -659,11 +660,11 @@
val = simple_strtol(buf, NULL, 10);
val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_crit[nr] = TEMP_TO_REG(val);
adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
data->temp_crit[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -778,7 +779,7 @@
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -891,7 +892,7 @@
struct adm1031_data *data = i2c_get_clientdata(client);
int chan;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -965,7 +966,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 5ddc22f..43f6991 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -49,6 +49,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
@@ -150,7 +151,7 @@
enum chips type;
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid;
unsigned long last_updated_measure;
unsigned long last_updated_config;
@@ -195,11 +196,11 @@
struct adm9240_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[attr->index] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index),
data->temp_max[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -246,11 +247,11 @@
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[attr->index] = IN_TO_REG(val, attr->index);
i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index),
data->in_min[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -263,11 +264,11 @@
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[attr->index] = IN_TO_REG(val, attr->index);
i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index),
data->in_max[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -350,7 +351,7 @@
int nr = attr->index;
u8 new_div;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!val) {
data->fan_min[nr] = 255;
@@ -390,7 +391,7 @@
i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr),
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -439,10 +440,10 @@
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->aout = AOUT_TO_REG(val);
i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
@@ -539,7 +540,7 @@
/* fill in the remaining client fields and attach */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->type = kind;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
if ((err = i2c_attach_client(new_client)))
goto exit_free;
@@ -691,7 +692,7 @@
struct adm9240_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
/* minimum measurement cycle: 1.75 seconds */
if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4))
@@ -771,7 +772,7 @@
data->last_updated_config = jiffies;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index ae9de63..65b2709 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -44,6 +44,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/mutex.h>
#include "lm75.h"
/*
@@ -182,10 +183,10 @@
struct asb100_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
/* array of 2 pointers to subclients */
@@ -245,11 +246,11 @@
struct asb100_data *data = i2c_get_clientdata(client); \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -331,10 +332,10 @@
struct asb100_data *data = i2c_get_clientdata(client);
u32 val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -351,7 +352,7 @@
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
@@ -381,7 +382,7 @@
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -461,7 +462,7 @@
struct asb100_data *data = i2c_get_clientdata(client); \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
switch (nr) { \
case 1: case 2: \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
@@ -472,7 +473,7 @@
} \
asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
data->reg[nr]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -574,11 +575,11 @@
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm &= 0x80; /* keep the enable bit */
data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -595,11 +596,11 @@
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm &= 0x0f; /* keep the duty cycle bits */
data->pwm |= (val ? 0x80 : 0x00);
asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -729,7 +730,7 @@
}
new_client = &data->client;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
@@ -789,7 +790,7 @@
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -885,7 +886,7 @@
struct i2c_client *cl;
int res, bank;
- down(&data->lock);
+ mutex_lock(&data->lock);
bank = (reg >> 8) & 0x0f;
if (bank > 2)
@@ -919,7 +920,7 @@
if (bank > 2)
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
@@ -930,7 +931,7 @@
struct i2c_client *cl;
int bank;
- down(&data->lock);
+ mutex_lock(&data->lock);
bank = (reg >> 8) & 0x0f;
if (bank > 2)
@@ -960,7 +961,7 @@
if (bank > 2)
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
- up(&data->lock);
+ mutex_unlock(&data->lock);
}
static void asb100_init_client(struct i2c_client *client)
@@ -984,7 +985,7 @@
struct asb100_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -1042,7 +1043,7 @@
dev_dbg(&client->dev, "... device update complete\n");
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index b0c4900..728a1e8 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -26,6 +26,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
@@ -60,7 +61,7 @@
struct atxp1_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
unsigned long last_updated;
u8 valid;
struct {
@@ -80,7 +81,7 @@
client = to_i2c_client(dev);
data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
@@ -93,7 +94,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return(data);
}
@@ -309,7 +310,7 @@
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
err = i2c_attach_client(new_client);
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 203f9c7..478eb4b 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -28,6 +28,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include "lm75.h"
/* Addresses to scan */
@@ -72,7 +73,7 @@
struct ds1621_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -156,10 +157,10 @@
struct ds1621_data *data = ds1621_update_client(dev); \
u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = val; \
ds1621_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -242,7 +243,7 @@
/* Fill in remaining client fields and put it into the global list */
strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -297,7 +298,7 @@
struct ds1621_data *data = i2c_get_clientdata(client);
u8 new_conf;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -327,7 +328,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index e029e0a..885465d 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -30,6 +30,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
static struct platform_device *pdev;
@@ -131,10 +132,10 @@
struct f71805f_data {
unsigned short addr;
const char *name;
- struct semaphore lock;
+ struct mutex lock;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
unsigned long last_limits; /* In jiffies */
@@ -224,20 +225,20 @@
{
u8 val;
- down(&data->lock);
+ mutex_lock(&data->lock);
outb(reg, data->addr + ADDR_REG_OFFSET);
val = inb(data->addr + DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return val;
}
static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val)
{
- down(&data->lock);
+ mutex_lock(&data->lock);
outb(reg, data->addr + ADDR_REG_OFFSET);
outb(val, data->addr + DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
}
/* It is important to read the MSB first, because doing so latches the
@@ -246,24 +247,24 @@
{
u16 val;
- down(&data->lock);
+ mutex_lock(&data->lock);
outb(reg, data->addr + ADDR_REG_OFFSET);
val = inb(data->addr + DATA_REG_OFFSET) << 8;
outb(++reg, data->addr + ADDR_REG_OFFSET);
val |= inb(data->addr + DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return val;
}
static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val)
{
- down(&data->lock);
+ mutex_lock(&data->lock);
outb(reg, data->addr + ADDR_REG_OFFSET);
outb(val >> 8, data->addr + DATA_REG_OFFSET);
outb(++reg, data->addr + ADDR_REG_OFFSET);
outb(val & 0xff, data->addr + DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
}
static struct f71805f_data *f71805f_update_device(struct device *dev)
@@ -271,7 +272,7 @@
struct f71805f_data *data = dev_get_drvdata(dev);
int nr;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
/* Limit registers cache is refreshed after 60 seconds */
if (time_after(jiffies, data->last_updated + 60 * HZ)
@@ -323,7 +324,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
@@ -362,10 +363,10 @@
struct f71805f_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_high[0] = in0_to_reg(val);
f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -376,18 +377,14 @@
struct f71805f_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_low[0] = in0_to_reg(val);
f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL);
-static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max);
-static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min);
-
static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -426,10 +423,10 @@
int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_high[nr] = in_to_reg(val);
f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -442,31 +439,14 @@
int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_low[nr] = in_to_reg(val);
f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_in(offset) \
-static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
- show_in, NULL, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in_max, set_in_max, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in_min, set_in_min, offset)
-
-sysfs_in(1);
-sysfs_in(2);
-sysfs_in(3);
-sysfs_in(4);
-sysfs_in(5);
-sysfs_in(6);
-sysfs_in(7);
-sysfs_in(8);
-
static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -495,24 +475,14 @@
int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_low[nr] = fan_to_reg(val);
f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_fan(offset) \
-static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan, NULL, offset - 1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_min, set_fan_min, offset - 1)
-
-sysfs_fan(1);
-sysfs_fan(2);
-sysfs_fan(3);
-
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
char *buf)
{
@@ -562,10 +532,10 @@
int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_high[nr] = temp_to_reg(val);
f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -578,28 +548,14 @@
int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_hyst[nr] = temp_to_reg(val);
f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_temp(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_temp, NULL, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
- show_temp_max, set_temp_max, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
- show_temp_hyst, set_temp_hyst, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO, \
- show_temp_type, NULL, offset - 1)
-
-sysfs_temp(1);
-sysfs_temp(2);
-sysfs_temp(3);
-
static ssize_t show_alarms_in(struct device *dev, struct device_attribute
*devattr, char *buf)
{
@@ -625,10 +581,6 @@
return sprintf(buf, "%d\n", (data->alarms[1] >> 3) & 0x07);
}
-static DEVICE_ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL);
-static DEVICE_ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL);
-static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL);
-
static ssize_t show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
{
@@ -637,7 +589,89 @@
return sprintf(buf, "%s\n", data->name);
}
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct device_attribute f71805f_dev_attr[] = {
+ __ATTR(in0_input, S_IRUGO, show_in0, NULL),
+ __ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max),
+ __ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min),
+ __ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL),
+ __ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL),
+ __ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL),
+ __ATTR(name, S_IRUGO, show_name, NULL),
+};
+
+static struct sensor_device_attribute f71805f_sensor_attr[] = {
+ SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
+ SENSOR_ATTR(in1_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 1),
+ SENSOR_ATTR(in1_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
+ SENSOR_ATTR(in2_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 2),
+ SENSOR_ATTR(in2_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
+ SENSOR_ATTR(in3_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 3),
+ SENSOR_ATTR(in3_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
+ SENSOR_ATTR(in4_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 4),
+ SENSOR_ATTR(in4_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
+ SENSOR_ATTR(in5_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 5),
+ SENSOR_ATTR(in5_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
+ SENSOR_ATTR(in6_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 6),
+ SENSOR_ATTR(in6_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
+ SENSOR_ATTR(in7_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 7),
+ SENSOR_ATTR(in7_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 7),
+ SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
+ SENSOR_ATTR(in8_max, S_IRUGO | S_IWUSR,
+ show_in_max, set_in_max, 8),
+ SENSOR_ATTR(in8_min, S_IRUGO | S_IWUSR,
+ show_in_min, set_in_min, 8),
+
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
+ SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 0),
+ SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
+ show_temp_hyst, set_temp_hyst, 0),
+ SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
+ SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 1),
+ SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR,
+ show_temp_hyst, set_temp_hyst, 1),
+ SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
+ SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
+ SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 2),
+ SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR,
+ show_temp_hyst, set_temp_hyst, 2),
+ SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
+};
+
+static struct sensor_device_attribute f71805f_fan_attr[] = {
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
+ SENSOR_ATTR(fan1_min, S_IRUGO | S_IWUSR,
+ show_fan_min, set_fan_min, 0),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
+ SENSOR_ATTR(fan2_min, S_IRUGO | S_IWUSR,
+ show_fan_min, set_fan_min, 1),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
+ SENSOR_ATTR(fan3_min, S_IRUGO | S_IWUSR,
+ show_fan_min, set_fan_min, 2),
+};
/*
* Device registration and initialization
@@ -668,7 +702,7 @@
{
struct f71805f_data *data;
struct resource *res;
- int err;
+ int i, err;
if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
err = -ENOMEM;
@@ -678,9 +712,9 @@
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
data->addr = res->start;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
data->name = "f71805f";
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
@@ -695,76 +729,31 @@
f71805f_init_device(data);
/* Register sysfs interface files */
- device_create_file(&pdev->dev, &dev_attr_in0_input);
- device_create_file(&pdev->dev, &dev_attr_in0_max);
- device_create_file(&pdev->dev, &dev_attr_in0_min);
- device_create_file(&pdev->dev, &sensor_dev_attr_in1_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in2_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in3_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in4_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in5_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in6_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in7_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in8_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in1_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in2_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in3_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in4_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in5_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in6_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in7_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in8_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in1_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in2_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in3_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in4_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in5_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in6_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in7_min.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_in8_min.dev_attr);
- if (data->fan_enabled & (1 << 0)) {
- device_create_file(&pdev->dev,
- &sensor_dev_attr_fan1_input.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_fan1_min.dev_attr);
+ for (i = 0; i < ARRAY_SIZE(f71805f_dev_attr); i++) {
+ err = device_create_file(&pdev->dev, &f71805f_dev_attr[i]);
+ if (err)
+ goto exit_class;
}
- if (data->fan_enabled & (1 << 1)) {
- device_create_file(&pdev->dev,
- &sensor_dev_attr_fan2_input.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_fan2_min.dev_attr);
+ for (i = 0; i < ARRAY_SIZE(f71805f_sensor_attr); i++) {
+ err = device_create_file(&pdev->dev,
+ &f71805f_sensor_attr[i].dev_attr);
+ if (err)
+ goto exit_class;
}
- if (data->fan_enabled & (1 << 2)) {
- device_create_file(&pdev->dev,
- &sensor_dev_attr_fan3_input.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_fan3_min.dev_attr);
+ for (i = 0; i < ARRAY_SIZE(f71805f_fan_attr); i++) {
+ if (!(data->fan_enabled & (1 << (i / 2))))
+ continue;
+ err = device_create_file(&pdev->dev,
+ &f71805f_fan_attr[i].dev_attr);
+ if (err)
+ goto exit_class;
}
- device_create_file(&pdev->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_temp3_input.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_temp3_max.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_temp1_max_hyst.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_temp2_max_hyst.dev_attr);
- device_create_file(&pdev->dev,
- &sensor_dev_attr_temp3_max_hyst.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_temp1_type.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_temp2_type.dev_attr);
- device_create_file(&pdev->dev, &sensor_dev_attr_temp3_type.dev_attr);
- device_create_file(&pdev->dev, &dev_attr_alarms_in);
- device_create_file(&pdev->dev, &dev_attr_alarms_fan);
- device_create_file(&pdev->dev, &dev_attr_alarms_temp);
- device_create_file(&pdev->dev, &dev_attr_name);
return 0;
+exit_class:
+ dev_err(&pdev->dev, "Sysfs interface creation failed\n");
+ hwmon_device_unregister(data->class_dev);
exit_free:
kfree(data);
exit:
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index 2540918..6bc76b4 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -33,6 +33,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -133,7 +134,7 @@
struct fscher_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -332,7 +333,7 @@
* global list */
strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -417,7 +418,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct fscher_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
@@ -457,7 +458,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
@@ -472,10 +473,10 @@
/* bits 0..1, 3..7 reserved => mask with 0x04 */
unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
fscher_write_value(client, reg, v);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -490,10 +491,10 @@
{
unsigned long v = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -518,14 +519,14 @@
return -EINVAL;
}
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
/* bits 2..7 reserved => mask with 0x03 */
data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -552,10 +553,10 @@
/* bits 2..7 reserved, 0 read only => mask with 0x02 */
unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
fscher_write_value(client, reg, v);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -609,10 +610,10 @@
/* bits 1..7 reserved => mask with 0x01 */
unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->global_control &= ~v;
fscher_write_value(client, reg, v);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -631,11 +632,11 @@
/* bits 0..3 reserved => mask with 0xf0 */
unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->watchdog[2] &= ~0xf0;
data->watchdog[2] |= v;
fscher_write_value(client, reg, data->watchdog[2]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -651,10 +652,10 @@
/* bits 0, 2..7 reserved => mask with 0x02 */
unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->watchdog[1] &= ~v;
fscher_write_value(client, reg, v);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -669,10 +670,10 @@
{
unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->watchdog[0] = v;
fscher_write_value(client, reg, data->watchdog[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 6d0146b..6dc4846b 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -37,6 +37,7 @@
#include <linux/init.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -89,8 +90,8 @@
static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind);
static int fscpos_detach_client(struct i2c_client *client);
-static int fscpos_read_value(struct i2c_client *client, u8 register);
-static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value);
+static int fscpos_read_value(struct i2c_client *client, u8 reg);
+static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
static struct fscpos_data *fscpos_update_device(struct device *dev);
static void fscpos_init_client(struct i2c_client *client);
@@ -114,7 +115,7 @@
struct fscpos_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* 0 until following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -208,13 +209,13 @@
return -EINVAL;
}
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
/* bits 2..7 reserved => mask with 0x03 */
data->fan_ripple[nr - 1] &= ~0x03;
data->fan_ripple[nr - 1] |= v;
fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -232,10 +233,10 @@
if (v < 0) v = 0;
if (v > 255) v = 255;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm[nr - 1] = v;
fscpos_write_value(client, reg, data->pwm[nr - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -278,11 +279,11 @@
/* bits 0..3 reserved => mask with 0xf0 */
unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->wdog_control &= ~0xf0;
data->wdog_control |= v;
fscpos_write_value(client, reg, data->wdog_control);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -304,10 +305,10 @@
return -EINVAL;
}
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->wdog_state &= ~v;
fscpos_write_value(client, reg, v);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -321,10 +322,10 @@
{
unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->wdog_preset = v;
fscpos_write_value(client, reg, data->wdog_preset);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -483,7 +484,7 @@
strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -579,7 +580,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct fscpos_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
int i;
@@ -625,7 +626,7 @@
data->last_updated = jiffies;
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 9e685e3..6606aab 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -43,6 +43,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
@@ -120,7 +121,7 @@
struct class_device *class_dev;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -212,10 +213,10 @@
struct gl518_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = type##_TO_REG(val); \
gl518_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -228,12 +229,12 @@
int regvalue; \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
regvalue = gl518_read_value(client, reg); \
data->value = type##_TO_REG(val); \
regvalue = (regvalue & ~mask) | (data->value << shift); \
gl518_write_value(client, reg, regvalue); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -265,7 +266,7 @@
int regvalue;
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[0] = FAN_TO_REG(val,
DIV_FROM_REG(data->fan_div[0]));
@@ -280,7 +281,7 @@
data->beep_mask &= data->alarm_mask;
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -291,7 +292,7 @@
int regvalue;
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[1] = FAN_TO_REG(val,
DIV_FROM_REG(data->fan_div[1]));
@@ -306,7 +307,7 @@
data->beep_mask &= data->alarm_mask;
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -407,7 +408,7 @@
strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -525,7 +526,7 @@
struct gl518_data *data = i2c_get_clientdata(client);
int val;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -586,7 +587,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index baee60e..47b4d49 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -29,6 +29,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Type of the extra sensor */
static unsigned short extra_sensor_type;
@@ -121,7 +122,7 @@
struct gl520_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until the following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -303,7 +304,7 @@
long v = simple_strtol(buf, NULL, 10);
u8 r;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (n == 0)
r = VDD_TO_REG(v);
@@ -317,7 +318,7 @@
else
gl520_write_value(client, reg, r);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -331,7 +332,7 @@
else
r = IN_TO_REG(v);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[n] = r;
@@ -340,7 +341,7 @@
else
gl520_write_value(client, reg, r);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -373,7 +374,7 @@
unsigned long v = simple_strtoul(buf, NULL, 10);
u8 r;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
r = FAN_TO_REG(v, data->fan_div[n - 1]);
data->fan_min[n - 1] = r;
@@ -390,7 +391,7 @@
data->beep_mask &= data->alarm_mask;
gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -409,7 +410,7 @@
return -EINVAL;
}
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_div[n - 1] = r;
if (n == 1)
@@ -417,7 +418,7 @@
else
gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -425,10 +426,10 @@
{
u8 r = simple_strtoul(buf, NULL, 10)?1:0;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_off = r;
gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -454,10 +455,10 @@
{
long v = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[n - 1] = TEMP_TO_REG(v);;
gl520_write_value(client, reg, data->temp_max[n - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -465,10 +466,10 @@
{
long v = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max_hyst[n - 1] = TEMP_TO_REG(v);
gl520_write_value(client, reg, data->temp_max_hyst[n - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -491,10 +492,10 @@
{
u8 r = simple_strtoul(buf, NULL, 10)?0:1;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->beep_enable = !r;
gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -502,11 +503,11 @@
{
u8 r = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
r &= data->alarm_mask;
data->beep_mask = r;
gl520_write_value(client, reg, r);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -561,7 +562,7 @@
/* Fill in the remaining client fields */
strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -685,7 +686,7 @@
struct gl520_data *data = i2c_get_clientdata(client);
int val;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
@@ -750,7 +751,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 23a9e1e..7636c1a 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -33,6 +33,7 @@
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/dmi.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */
@@ -70,10 +71,10 @@
static int rest_x;
static int rest_y;
-static DECLARE_MUTEX(hdaps_sem);
+static DEFINE_MUTEX(hdaps_mutex);
/*
- * __get_latch - Get the value from a given port. Callers must hold hdaps_sem.
+ * __get_latch - Get the value from a given port. Callers must hold hdaps_mutex.
*/
static inline u8 __get_latch(u16 port)
{
@@ -82,7 +83,7 @@
/*
* __check_latch - Check a port latch for a given value. Returns zero if the
- * port contains the given value. Callers must hold hdaps_sem.
+ * port contains the given value. Callers must hold hdaps_mutex.
*/
static inline int __check_latch(u16 port, u8 val)
{
@@ -93,7 +94,7 @@
/*
* __wait_latch - Wait up to 100us for a port latch to get a certain value,
- * returning zero if the value is obtained. Callers must hold hdaps_sem.
+ * returning zero if the value is obtained. Callers must hold hdaps_mutex.
*/
static int __wait_latch(u16 port, u8 val)
{
@@ -110,7 +111,7 @@
/*
* __device_refresh - request a refresh from the accelerometer. Does not wait
- * for refresh to complete. Callers must hold hdaps_sem.
+ * for refresh to complete. Callers must hold hdaps_mutex.
*/
static void __device_refresh(void)
{
@@ -124,7 +125,7 @@
/*
* __device_refresh_sync - request a synchronous refresh from the
* accelerometer. We wait for the refresh to complete. Returns zero if
- * successful and nonzero on error. Callers must hold hdaps_sem.
+ * successful and nonzero on error. Callers must hold hdaps_mutex.
*/
static int __device_refresh_sync(void)
{
@@ -134,7 +135,7 @@
/*
* __device_complete - indicate to the accelerometer that we are done reading
- * data, and then initiate an async refresh. Callers must hold hdaps_sem.
+ * data, and then initiate an async refresh. Callers must hold hdaps_mutex.
*/
static inline void __device_complete(void)
{
@@ -152,7 +153,7 @@
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mutex);
/* do a sync refresh -- we need to be sure that we read fresh data */
ret = __device_refresh_sync();
@@ -163,7 +164,7 @@
__device_complete();
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mutex);
return ret;
}
@@ -198,9 +199,9 @@
{
int ret;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mutex);
ret = __hdaps_read_pair(port1, port2, val1, val2);
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mutex);
return ret;
}
@@ -213,7 +214,7 @@
{
int total, ret = -ENXIO;
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mutex);
outb(0x13, 0x1610);
outb(0x01, 0x161f);
@@ -279,7 +280,7 @@
}
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mutex);
return ret;
}
@@ -313,7 +314,7 @@
};
/*
- * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem.
+ * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mutex.
*/
static void hdaps_calibrate(void)
{
@@ -325,7 +326,7 @@
int x, y;
/* Cannot sleep. Try nonblockingly. If we fail, try again later. */
- if (down_trylock(&hdaps_sem)) {
+ if (!mutex_trylock(&hdaps_mutex)) {
mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
return;
}
@@ -340,7 +341,7 @@
mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
out:
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mutex);
}
@@ -420,9 +421,9 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- down(&hdaps_sem);
+ mutex_lock(&hdaps_mutex);
hdaps_calibrate();
- up(&hdaps_sem);
+ mutex_unlock(&hdaps_mutex);
return count;
}
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index e497274..a74a44f 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -54,6 +54,10 @@
(IMVP-II). You can find more information in the datasheet of Max1718
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+ The 13 specification corresponds to the Intel Pentium M series. There
+ doesn't seem to be any named specification for these. The conversion
+ tables are detailed directly in the various Pentium M datasheets:
+ http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
*/
/* vrm is the VRM/VRD document version multiplied by 10.
@@ -100,6 +104,8 @@
case 17: /* Intel IMVP-II */
return(val & 0x10 ? 975 - (val & 0xF) * 25 :
1750 - val * 50);
+ case 13:
+ return(1708 - (val & 0x3f) * 16);
default: /* report 0 for unknown */
printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n");
return 0;
@@ -129,8 +135,9 @@
static struct vrm_model vrm_models[] = {
{X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
{X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
- {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 85}, /* 0.13um too */
+ {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */
{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
+ {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */
{X86_VENDOR_INTEL, 0x6, ANY, ANY, 82}, /* any P6 */
{X86_VENDOR_INTEL, 0x7, ANY, ANY, 0}, /* Itanium */
{X86_VENDOR_INTEL, 0xF, 0x0, ANY, 90}, /* P4 */
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index dddd3eb..106fa01 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -17,6 +17,7 @@
#include <linux/idr.h>
#include <linux/hwmon.h>
#include <linux/gfp.h>
+#include <linux/spinlock.h>
#define HWMON_ID_PREFIX "hwmon"
#define HWMON_ID_FORMAT HWMON_ID_PREFIX "%d"
@@ -24,6 +25,7 @@
static struct class *hwmon_class;
static DEFINE_IDR(hwmon_idr);
+static DEFINE_SPINLOCK(idr_lock);
/**
* hwmon_device_register - register w/ hwmon sysfs class
@@ -37,20 +39,30 @@
struct class_device *hwmon_device_register(struct device *dev)
{
struct class_device *cdev;
- int id;
+ int id, err;
- if (idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0)
+again:
+ if (unlikely(idr_pre_get(&hwmon_idr, GFP_KERNEL) == 0))
return ERR_PTR(-ENOMEM);
- if (idr_get_new(&hwmon_idr, NULL, &id) < 0)
- return ERR_PTR(-ENOMEM);
+ spin_lock(&idr_lock);
+ err = idr_get_new(&hwmon_idr, NULL, &id);
+ spin_unlock(&idr_lock);
+
+ if (unlikely(err == -EAGAIN))
+ goto again;
+ else if (unlikely(err))
+ return ERR_PTR(err);
id = id & MAX_ID_MASK;
cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev,
HWMON_ID_FORMAT, id);
- if (IS_ERR(cdev))
+ if (IS_ERR(cdev)) {
+ spin_lock(&idr_lock);
idr_remove(&hwmon_idr, id);
+ spin_unlock(&idr_lock);
+ }
return cdev;
}
@@ -64,9 +76,11 @@
{
int id;
- if (sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1) {
+ if (likely(sscanf(cdev->class_id, HWMON_ID_FORMAT, &id) == 1)) {
class_device_unregister(cdev);
+ spin_lock(&idr_lock);
idr_remove(&hwmon_idr, id);
+ spin_unlock(&idr_lock);
} else
dev_dbg(cdev->dev,
"hwmon_device_unregister() failed: bad class ID!\n");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index d7a9401..06df92b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -41,6 +41,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
@@ -194,10 +195,10 @@
struct it87_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -224,9 +225,8 @@
static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
static int it87_detach_client(struct i2c_client *client);
-static int it87_read_value(struct i2c_client *client, u8 register);
-static int it87_write_value(struct i2c_client *client, u8 register,
- u8 value);
+static int it87_read_value(struct i2c_client *client, u8 reg);
+static int it87_write_value(struct i2c_client *client, u8 reg, u8 value);
static struct it87_data *it87_update_device(struct device *dev);
static int it87_check_pwm(struct i2c_client *client);
static void it87_init_client(struct i2c_client *client, struct it87_data *data);
@@ -290,11 +290,11 @@
struct it87_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
it87_write_value(client, IT87_REG_VIN_MIN(nr),
data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
@@ -307,11 +307,11 @@
struct it87_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
it87_write_value(client, IT87_REG_VIN_MAX(nr),
data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -381,10 +381,10 @@
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_high[nr] = TEMP_TO_REG(val);
it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -397,10 +397,10 @@
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_low[nr] = TEMP_TO_REG(val);
it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_temp_offset(offset) \
@@ -440,7 +440,7 @@
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->sensor &= ~(1 << nr);
data->sensor &= ~(8 << nr);
@@ -450,11 +450,11 @@
else if (val == 2)
data->sensor |= 8 << nr;
else if (val != 0) {
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_sensor_offset(offset) \
@@ -524,7 +524,7 @@
int val = simple_strtol(buf, NULL, 10);
u8 reg = it87_read_value(client, IT87_REG_FAN_DIV);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
switch (nr) {
case 0: data->fan_div[nr] = reg & 0x07; break;
case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
@@ -533,7 +533,7 @@
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
@@ -548,7 +548,7 @@
int i, min[3];
u8 old;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
old = it87_read_value(client, IT87_REG_FAN_DIV);
for (i = 0; i < 3; i++)
@@ -576,7 +576,7 @@
data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i]));
it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_pwm_enable(struct device *dev,
@@ -589,7 +589,7 @@
struct it87_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (val == 0) {
int tmp;
@@ -606,11 +606,11 @@
/* set saved pwm value, clear FAN_CTLX PWM mode bit */
it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
} else {
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
@@ -626,11 +626,11 @@
if (val < 0 || val > 255)
return -EINVAL;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->manual_pwm_ctl[nr] = val;
if (data->fan_main_ctrl & (1 << nr))
it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -776,7 +776,7 @@
new_client = &data->client;
if (is_isa)
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
@@ -823,7 +823,7 @@
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -950,10 +950,10 @@
int res;
if (i2c_is_isa_client(client)) {
- down(&data->lock);
+ mutex_lock(&data->lock);
outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
} else
return i2c_smbus_read_byte_data(client, reg);
@@ -969,10 +969,10 @@
struct it87_data *data = i2c_get_clientdata(client);
if (i2c_is_isa_client(client)) {
- down(&data->lock);
+ mutex_lock(&data->lock);
outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
} else
return i2c_smbus_write_byte_data(client, reg, value);
@@ -1098,7 +1098,7 @@
struct it87_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -1160,7 +1160,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 6b1aa7e..071f0fc 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -45,6 +45,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -153,7 +154,7 @@
struct lm63_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -192,13 +193,13 @@
struct lm63_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan[1] = FAN_TO_REG(val);
i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB,
data->fan[1] & 0xFF);
i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB,
data->fan[1] >> 8);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -222,12 +223,12 @@
return -EPERM;
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm1_value = val <= 0 ? 0 :
val >= 255 ? 2 * data->pwm1_freq :
(val * data->pwm1_freq * 2 + 127) / 255;
i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -253,10 +254,10 @@
struct lm63_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp8[1] = TEMP8_TO_REG(val);
i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -284,13 +285,13 @@
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp11[nr] = TEMP11_TO_REG(val);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
data->temp11[nr] >> 8);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
data->temp11[nr] & 0xff);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -314,11 +315,11 @@
long val = simple_strtol(buf, NULL, 10);
long hyst;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
HYST_TO_REG(hyst));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -427,7 +428,7 @@
strlcpy(new_client->name, "lm63", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -530,7 +531,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm63_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
if (data->config & 0x04) { /* tachometer enabled */
@@ -582,7 +583,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 74ca2c8..fc25b90 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include "lm75.h"
@@ -47,7 +48,7 @@
struct lm75_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u16 temp_input; /* Register values */
@@ -91,10 +92,10 @@
struct lm75_data *data = i2c_get_clientdata(client); \
int temp = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = LM75_TEMP_TO_REG(temp); \
lm75_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
set(temp_max, LM75_REG_TEMP_OS);
@@ -188,7 +189,7 @@
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -264,7 +265,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm75_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -277,7 +278,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index df9e02a..459cc97 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -32,6 +32,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END };
@@ -51,7 +52,7 @@
struct lm77_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid;
unsigned long last_updated; /* In jiffies */
int temp_input; /* Temperatures */
@@ -139,10 +140,10 @@
struct lm77_data *data = i2c_get_clientdata(client); \
long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = val; \
lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value)); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -157,11 +158,11 @@
struct lm77_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_hyst = data->temp_crit - val;
lm77_write_value(client, LM77_REG_TEMP_HYST,
LM77_TEMP_TO_REG(data->temp_hyst));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -173,7 +174,7 @@
long val = simple_strtoul(buf, NULL, 10);
int oldcrithyst;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
oldcrithyst = data->temp_crit - data->temp_hyst;
data->temp_crit = val;
data->temp_hyst = data->temp_crit - oldcrithyst;
@@ -181,7 +182,7 @@
LM77_TEMP_TO_REG(data->temp_crit));
lm77_write_value(client, LM77_REG_TEMP_HYST,
LM77_TEMP_TO_REG(data->temp_hyst));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -306,7 +307,7 @@
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -380,7 +381,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm77_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -406,7 +407,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index e404001..94be3d7 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -27,6 +27,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
/* Addresses to scan */
@@ -131,10 +132,10 @@
struct lm78_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -157,8 +158,8 @@
static int lm78_detect(struct i2c_adapter *adapter, int address, int kind);
static int lm78_detach_client(struct i2c_client *client);
-static int lm78_read_value(struct i2c_client *client, u8 register);
-static int lm78_write_value(struct i2c_client *client, u8 register, u8 value);
+static int lm78_read_value(struct i2c_client *client, u8 reg);
+static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value);
static struct lm78_data *lm78_update_device(struct device *dev);
static void lm78_init_client(struct i2c_client *client);
@@ -207,10 +208,10 @@
struct lm78_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -221,10 +222,10 @@
struct lm78_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -288,10 +289,10 @@
struct lm78_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_over = TEMP_TO_REG(val);
lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -307,10 +308,10 @@
struct lm78_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_hyst = TEMP_TO_REG(val);
lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -342,10 +343,10 @@
struct lm78_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -368,7 +369,7 @@
unsigned long min;
u8 reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
@@ -380,7 +381,7 @@
default:
dev_err(&client->dev, "fan_div value %ld not "
"supported. Choose one of 1, 2, 4 or 8!\n", val);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
@@ -398,7 +399,7 @@
data->fan_min[nr] =
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -548,7 +549,7 @@
new_client = &data->client;
if (is_isa)
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
@@ -598,7 +599,7 @@
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -697,10 +698,10 @@
int res;
if (i2c_is_isa_client(client)) {
struct lm78_data *data = i2c_get_clientdata(client);
- down(&data->lock);
+ mutex_lock(&data->lock);
outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
res = inb_p(client->addr + LM78_DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
} else
return i2c_smbus_read_byte_data(client, reg);
@@ -717,10 +718,10 @@
{
if (i2c_is_isa_client(client)) {
struct lm78_data *data = i2c_get_clientdata(client);
- down(&data->lock);
+ mutex_lock(&data->lock);
outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
outb_p(value, client->addr + LM78_DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
} else
return i2c_smbus_write_byte_data(client, reg, value);
@@ -742,7 +743,7 @@
struct lm78_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -786,7 +787,7 @@
data->fan_div[2] = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index c9a7cde..f72120d 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -28,6 +28,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c,
@@ -108,7 +109,7 @@
struct lm80_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -191,10 +192,10 @@
struct lm80_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock);\
+ mutex_lock(&data->update_lock);\
data->value = IN_TO_REG(val); \
lm80_write_value(client, reg, data->value); \
- up(&data->update_lock);\
+ mutex_unlock(&data->update_lock);\
return count; \
}
set_in(min0, in_min[0], LM80_REG_IN_MIN(0));
@@ -241,10 +242,10 @@
struct lm80_data *data = i2c_get_clientdata(client); \
long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock);\
+ mutex_lock(&data->update_lock);\
data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \
lm80_write_value(client, reg, data->value); \
- up(&data->update_lock);\
+ mutex_unlock(&data->update_lock);\
return count; \
}
set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]);
@@ -263,7 +264,7 @@
u8 reg;
/* Save fan_min */
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
@@ -275,7 +276,7 @@
default:
dev_err(&client->dev, "fan_div value %ld not "
"supported. Choose one of 1, 2, 4 or 8!\n", val);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
@@ -286,7 +287,7 @@
/* Restore fan_min */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -325,10 +326,10 @@
struct lm80_data *data = i2c_get_clientdata(client); \
long val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = TEMP_LIMIT_TO_REG(val); \
lm80_write_value(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX);
@@ -437,7 +438,7 @@
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -545,7 +546,7 @@
struct lm80_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
dev_dbg(&client->dev, "Starting lm80 update\n");
@@ -585,7 +586,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 26dfa9e..aac4ec2 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -35,6 +35,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -139,7 +140,7 @@
struct lm83_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -171,11 +172,11 @@
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
data->temp[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -300,7 +301,7 @@
/* We can fill in the remaining client fields */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -373,7 +374,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm83_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int nr;
@@ -393,7 +394,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 7389a01..342e966 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -31,6 +31,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -331,10 +332,10 @@
struct lm85_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
int valid; /* !=0 if following fields are valid */
unsigned long last_reading; /* In jiffies */
unsigned long last_config; /* In jiffies */
@@ -373,8 +374,8 @@
int kind);
static int lm85_detach_client(struct i2c_client *client);
-static int lm85_read_value(struct i2c_client *client, u8 register);
-static int lm85_write_value(struct i2c_client *client, u8 register, int value);
+static int lm85_read_value(struct i2c_client *client, u8 reg);
+static int lm85_write_value(struct i2c_client *client, u8 reg, int value);
static struct lm85_data *lm85_update_device(struct device *dev);
static void lm85_init_client(struct i2c_client *client);
@@ -407,10 +408,10 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val);
lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -499,10 +500,10 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm[nr] = PWM_TO_REG(val);
lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
@@ -559,10 +560,10 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = INS_TO_REG(nr, val);
lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_in_max(struct device *dev, char *buf, int nr)
@@ -577,10 +578,10 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = INS_TO_REG(nr, val);
lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_in_reg(offset) \
@@ -640,10 +641,10 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
@@ -658,10 +659,10 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_temp_reg(offset) \
@@ -713,12 +714,12 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
| ZONE_TO_REG(val) ;
lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
data->autofan[nr].config);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
@@ -733,11 +734,11 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->autofan[nr].min_pwm = PWM_TO_REG(val);
lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
data->autofan[nr].min_pwm);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
@@ -752,7 +753,7 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->autofan[nr].min_off = val;
lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
| data->syncpwm3
@@ -760,7 +761,7 @@
| (data->autofan[1].min_off ? 0x40 : 0)
| (data->autofan[2].min_off ? 0x80 : 0)
);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
@@ -775,13 +776,13 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->autofan[nr].freq = FREQ_TO_REG(val);
lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
(data->zone[nr].range << 4)
| data->autofan[nr].freq
);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define pwm_auto(offset) \
@@ -857,7 +858,7 @@
int min;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = TEMP_FROM_REG(data->zone[nr].limit);
data->zone[nr].off_desired = TEMP_TO_REG(val);
data->zone[nr].hyst = HYST_TO_REG(min - val);
@@ -871,7 +872,7 @@
(data->zone[2].hyst << 4)
);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
@@ -886,7 +887,7 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->zone[nr].limit = TEMP_TO_REG(val);
lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
data->zone[nr].limit);
@@ -913,7 +914,7 @@
(data->zone[2].hyst << 4)
);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
@@ -930,7 +931,7 @@
int min;
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = TEMP_FROM_REG(data->zone[nr].limit);
data->zone[nr].max_desired = TEMP_TO_REG(val);
data->zone[nr].range = RANGE_TO_REG(
@@ -938,7 +939,7 @@
lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
((data->zone[nr].range & 0x0f) << 4)
| (data->autofan[nr].freq & 0x07));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
@@ -953,11 +954,11 @@
struct lm85_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->zone[nr].critical = TEMP_TO_REG(val);
lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
data->zone[nr].critical);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define temp_auto(offset) \
@@ -1149,7 +1150,7 @@
/* Fill in the remaining client fields */
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -1368,7 +1369,7 @@
struct lm85_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ( !data->valid ||
time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
@@ -1571,7 +1572,7 @@
data->valid = 1;
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 6ba34c3..e229daf 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -60,6 +60,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -176,7 +177,7 @@
struct lm87_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -253,11 +254,11 @@
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]);
lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) :
LM87_REG_AIN_MIN(nr-6), data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static void set_in_max(struct device *dev, const char *buf, int nr)
@@ -266,11 +267,11 @@
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]);
lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) :
LM87_REG_AIN_MAX(nr-6), data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
#define set_in(offset) \
@@ -327,10 +328,10 @@
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_low[nr] = TEMP_TO_REG(val);
lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static void set_temp_high(struct device *dev, const char *buf, int nr)
@@ -339,10 +340,10 @@
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_high[nr] = TEMP_TO_REG(val);
lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
#define set_temp(offset) \
@@ -411,11 +412,11 @@
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val,
FAN_DIV_FROM_REG(data->fan_div[nr]));
lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
/* Note: we save and restore the fan minimum here, because its value is
@@ -431,7 +432,7 @@
unsigned long min;
u8 reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
FAN_DIV_FROM_REG(data->fan_div[nr]));
@@ -441,7 +442,7 @@
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
@@ -459,7 +460,7 @@
data->fan_min[nr] = FAN_TO_REG(min, val);
lm87_write_value(client, LM87_REG_FAN_MIN(nr),
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -522,10 +523,10 @@
struct lm87_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->aout = AOUT_TO_REG(val);
lm87_write_value(client, LM87_REG_AOUT, data->aout);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
@@ -589,7 +590,7 @@
/* We can fill in the remaining client fields */
strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -744,7 +745,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm87_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
int i, j;
@@ -813,7 +814,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 56794644..d9eeaf7 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -78,6 +78,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/*
* Addresses to scan
@@ -201,7 +202,7 @@
struct lm90_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
int kind;
@@ -247,13 +248,13 @@
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (data->kind == adt7461)
data->temp8[nr] = TEMP1_TO_REG_ADT7461(val);
else
data->temp8[nr] = TEMP1_TO_REG(val);
i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -281,7 +282,7 @@
long val = simple_strtol(buf, NULL, 10);
int nr = attr->index;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (data->kind == adt7461)
data->temp11[nr] = TEMP2_TO_REG_ADT7461(val);
else
@@ -290,7 +291,7 @@
data->temp11[nr] >> 8);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
data->temp11[nr] & 0xff);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -311,11 +312,11 @@
long val = simple_strtol(buf, NULL, 10);
long hyst;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
hyst = TEMP1_FROM_REG(data->temp8[3]) - val;
i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
HYST_TO_REG(hyst));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -558,7 +559,7 @@
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
data->kind = kind;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -646,7 +647,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm90_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
u8 oldh, newh, l;
@@ -692,7 +693,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index b0c4cb7..197f772 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -46,6 +46,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* The LM92 and MAX6635 have 2 two-state pins for address selection,
resulting in 4 possible addresses. */
@@ -96,7 +97,7 @@
struct lm92_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -114,7 +115,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct lm92_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
@@ -134,7 +135,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
@@ -158,10 +159,10 @@
struct lm92_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = TEMP_TO_REG(val); \
i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
set_temp(temp1_crit, LM92_REG_TEMP_CRIT);
@@ -194,11 +195,11 @@
struct lm92_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
swab16(TEMP_TO_REG(data->temp1_hyst)));
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -348,7 +349,7 @@
/* Fill in the remaining client fields */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the i2c subsystem a new client has arrived */
if ((err = i2c_attach_client(new_client)))
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 3abe330..b4135b5 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -33,6 +33,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/mutex.h>
static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
0x29, 0x2a, 0x2b,
@@ -104,7 +105,7 @@
struct max1619_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -141,10 +142,10 @@
struct max1619_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->value = TEMP_TO_REG(val); \
i2c_smbus_write_byte_data(client, reg, data->value); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
@@ -262,7 +263,7 @@
/* We can fill in the remaining client fields */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -330,7 +331,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct max1619_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Updating max1619 data.\n");
@@ -353,7 +354,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index f161e88..ae05e48 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -43,6 +43,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
static u8 devid;
@@ -183,8 +184,8 @@
struct pc87360_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
- struct semaphore update_lock;
+ struct mutex lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -283,7 +284,7 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long fan_min = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[attr->index]));
/* If it wouldn't fit, change clock divisor */
@@ -300,23 +301,31 @@
/* Write new divider, preserve alarm bits */
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(attr->index),
data->fan_status[attr->index] & 0xF9);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define show_and_set_fan(offset) \
-static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan_input, NULL, offset-1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \
- show_fan_min, set_fan_min, offset-1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
- show_fan_div, NULL, offset-1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_status, S_IRUGO, \
- show_fan_status, NULL, offset-1);
-show_and_set_fan(1)
-show_and_set_fan(2)
-show_and_set_fan(3)
+static struct sensor_device_attribute fan_input[] = {
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2),
+};
+static struct sensor_device_attribute fan_status[] = {
+ SENSOR_ATTR(fan1_status, S_IRUGO, show_fan_status, NULL, 0),
+ SENSOR_ATTR(fan2_status, S_IRUGO, show_fan_status, NULL, 1),
+ SENSOR_ATTR(fan3_status, S_IRUGO, show_fan_status, NULL, 2),
+};
+static struct sensor_device_attribute fan_div[] = {
+ SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
+ SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
+ SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
+};
+static struct sensor_device_attribute fan_min[] = {
+ SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 0),
+ SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 1),
+ SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, set_fan_min, 2),
+};
static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, char *buf)
{
@@ -335,21 +344,20 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm[attr->index] = PWM_TO_REG(val,
FAN_CONFIG_INVERT(data->fan_conf, attr->index));
pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(attr->index),
data->pwm[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define show_and_set_pwm(offset) \
-static SENSOR_DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \
- show_pwm, set_pwm, offset-1);
-show_and_set_pwm(1)
-show_and_set_pwm(2)
-show_and_set_pwm(3)
+static struct sensor_device_attribute pwm[] = {
+ SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0),
+ SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1),
+ SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2),
+};
static ssize_t show_in_input(struct device *dev, struct device_attribute *devattr, char *buf)
{
@@ -386,11 +394,11 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MIN,
data->in_min[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -401,35 +409,67 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[attr->index] = IN_TO_REG(val,
data->in_vref);
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_IN_MAX,
data->in_max[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define show_and_set_in(offset) \
-static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
- show_in_input, NULL, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
- show_in_min, set_in_min, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
- show_in_max, set_in_max, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_status, S_IRUGO, \
- show_in_status, NULL, offset);
-show_and_set_in(0)
-show_and_set_in(1)
-show_and_set_in(2)
-show_and_set_in(3)
-show_and_set_in(4)
-show_and_set_in(5)
-show_and_set_in(6)
-show_and_set_in(7)
-show_and_set_in(8)
-show_and_set_in(9)
-show_and_set_in(10)
+static struct sensor_device_attribute in_input[] = {
+ SENSOR_ATTR(in0_input, S_IRUGO, show_in_input, NULL, 0),
+ SENSOR_ATTR(in1_input, S_IRUGO, show_in_input, NULL, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, show_in_input, NULL, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, show_in_input, NULL, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, show_in_input, NULL, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, show_in_input, NULL, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, show_in_input, NULL, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, show_in_input, NULL, 7),
+ SENSOR_ATTR(in8_input, S_IRUGO, show_in_input, NULL, 8),
+ SENSOR_ATTR(in9_input, S_IRUGO, show_in_input, NULL, 9),
+ SENSOR_ATTR(in10_input, S_IRUGO, show_in_input, NULL, 10),
+};
+static struct sensor_device_attribute in_status[] = {
+ SENSOR_ATTR(in0_status, S_IRUGO, show_in_status, NULL, 0),
+ SENSOR_ATTR(in1_status, S_IRUGO, show_in_status, NULL, 1),
+ SENSOR_ATTR(in2_status, S_IRUGO, show_in_status, NULL, 2),
+ SENSOR_ATTR(in3_status, S_IRUGO, show_in_status, NULL, 3),
+ SENSOR_ATTR(in4_status, S_IRUGO, show_in_status, NULL, 4),
+ SENSOR_ATTR(in5_status, S_IRUGO, show_in_status, NULL, 5),
+ SENSOR_ATTR(in6_status, S_IRUGO, show_in_status, NULL, 6),
+ SENSOR_ATTR(in7_status, S_IRUGO, show_in_status, NULL, 7),
+ SENSOR_ATTR(in8_status, S_IRUGO, show_in_status, NULL, 8),
+ SENSOR_ATTR(in9_status, S_IRUGO, show_in_status, NULL, 9),
+ SENSOR_ATTR(in10_status, S_IRUGO, show_in_status, NULL, 10),
+};
+static struct sensor_device_attribute in_min[] = {
+ SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 0),
+ SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 1),
+ SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 2),
+ SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 3),
+ SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 4),
+ SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 5),
+ SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 6),
+ SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 7),
+ SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 8),
+ SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 9),
+ SENSOR_ATTR(in10_min, S_IWUSR | S_IRUGO, show_in_min, set_in_min, 10),
+};
+static struct sensor_device_attribute in_max[] = {
+ SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 0),
+ SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 1),
+ SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 2),
+ SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 3),
+ SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 4),
+ SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 5),
+ SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 6),
+ SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 7),
+ SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 8),
+ SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 9),
+ SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10),
+};
static ssize_t show_therm_input(struct device *dev, struct device_attribute *devattr, char *buf)
{
@@ -473,11 +513,11 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[attr->index] = IN_TO_REG(val, data->in_vref);
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MIN,
data->in_min[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_therm_max(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -488,11 +528,11 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[attr->index] = IN_TO_REG(val, data->in_vref);
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_MAX,
data->in_max[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -503,28 +543,51 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_crit[attr->index-11] = IN_TO_REG(val, data->in_vref);
pc87360_write_value(data, LD_IN, attr->index, PC87365_REG_TEMP_CRIT,
data->in_crit[attr->index-11]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define show_and_set_therm(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_therm_input, NULL, 11+offset-4); \
-static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
- show_therm_min, set_therm_min, 11+offset-4); \
-static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
- show_therm_max, set_therm_max, 11+offset-4); \
-static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
- show_therm_crit, set_therm_crit, 11+offset-4); \
-static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
- show_therm_status, NULL, 11+offset-4);
-show_and_set_therm(4)
-show_and_set_therm(5)
-show_and_set_therm(6)
+/* the +11 term below reflects the fact that VLM units 11,12,13 are
+ used in the chip to measure voltage across the thermistors
+*/
+static struct sensor_device_attribute therm_input[] = {
+ SENSOR_ATTR(temp4_input, S_IRUGO, show_therm_input, NULL, 0+11),
+ SENSOR_ATTR(temp5_input, S_IRUGO, show_therm_input, NULL, 1+11),
+ SENSOR_ATTR(temp6_input, S_IRUGO, show_therm_input, NULL, 2+11),
+};
+static struct sensor_device_attribute therm_status[] = {
+ SENSOR_ATTR(temp4_status, S_IRUGO, show_therm_status, NULL, 0+11),
+ SENSOR_ATTR(temp5_status, S_IRUGO, show_therm_status, NULL, 1+11),
+ SENSOR_ATTR(temp6_status, S_IRUGO, show_therm_status, NULL, 2+11),
+};
+static struct sensor_device_attribute therm_min[] = {
+ SENSOR_ATTR(temp4_min, S_IRUGO | S_IWUSR,
+ show_therm_min, set_therm_min, 0+11),
+ SENSOR_ATTR(temp5_min, S_IRUGO | S_IWUSR,
+ show_therm_min, set_therm_min, 1+11),
+ SENSOR_ATTR(temp6_min, S_IRUGO | S_IWUSR,
+ show_therm_min, set_therm_min, 2+11),
+};
+static struct sensor_device_attribute therm_max[] = {
+ SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR,
+ show_therm_max, set_therm_max, 0+11),
+ SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR,
+ show_therm_max, set_therm_max, 1+11),
+ SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR,
+ show_therm_max, set_therm_max, 2+11),
+};
+static struct sensor_device_attribute therm_crit[] = {
+ SENSOR_ATTR(temp4_crit, S_IRUGO | S_IWUSR,
+ show_therm_crit, set_therm_crit, 0+11),
+ SENSOR_ATTR(temp5_crit, S_IRUGO | S_IWUSR,
+ show_therm_crit, set_therm_crit, 1+11),
+ SENSOR_ATTR(temp6_crit, S_IRUGO | S_IWUSR,
+ show_therm_crit, set_therm_crit, 2+11),
+};
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -592,11 +655,11 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[attr->index] = TEMP_TO_REG(val);
pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MIN,
data->temp_min[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -607,11 +670,11 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[attr->index] = TEMP_TO_REG(val);
pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_MAX,
data->temp_max[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_crit(struct device *dev, struct device_attribute *devattr, const char *buf,
@@ -622,28 +685,48 @@
struct pc87360_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_crit[attr->index] = TEMP_TO_REG(val);
pc87360_write_value(data, LD_TEMP, attr->index, PC87365_REG_TEMP_CRIT,
data->temp_crit[attr->index]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define show_and_set_temp(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_temp_input, NULL, offset-1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
- show_temp_min, set_temp_min, offset-1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
- show_temp_max, set_temp_max, offset-1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \
- show_temp_crit, set_temp_crit, offset-1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_status, S_IRUGO, \
- show_temp_status, NULL, offset-1);
-show_and_set_temp(1)
-show_and_set_temp(2)
-show_and_set_temp(3)
+static struct sensor_device_attribute temp_input[] = {
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0),
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1),
+ SENSOR_ATTR(temp3_input, S_IRUGO, show_temp_input, NULL, 2),
+};
+static struct sensor_device_attribute temp_status[] = {
+ SENSOR_ATTR(temp1_status, S_IRUGO, show_temp_status, NULL, 0),
+ SENSOR_ATTR(temp2_status, S_IRUGO, show_temp_status, NULL, 1),
+ SENSOR_ATTR(temp3_status, S_IRUGO, show_temp_status, NULL, 2),
+};
+static struct sensor_device_attribute temp_min[] = {
+ SENSOR_ATTR(temp1_min, S_IRUGO | S_IWUSR,
+ show_temp_min, set_temp_min, 0),
+ SENSOR_ATTR(temp2_min, S_IRUGO | S_IWUSR,
+ show_temp_min, set_temp_min, 1),
+ SENSOR_ATTR(temp3_min, S_IRUGO | S_IWUSR,
+ show_temp_min, set_temp_min, 2),
+};
+static struct sensor_device_attribute temp_max[] = {
+ SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 0),
+ SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 1),
+ SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR,
+ show_temp_max, set_temp_max, 2),
+};
+static struct sensor_device_attribute temp_crit[] = {
+ SENSOR_ATTR(temp1_crit, S_IRUGO | S_IWUSR,
+ show_temp_crit, set_temp_crit, 0),
+ SENSOR_ATTR(temp2_crit, S_IRUGO | S_IWUSR,
+ show_temp_crit, set_temp_crit, 1),
+ SENSOR_ATTR(temp3_crit, S_IRUGO | S_IWUSR,
+ show_temp_crit, set_temp_crit, 2),
+};
static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -749,22 +832,24 @@
static int pc87360_detect(struct i2c_adapter *adapter)
{
int i;
- struct i2c_client *new_client;
+ struct i2c_client *client;
struct pc87360_data *data;
int err = 0;
const char *name = "pc87360";
int use_thermistors = 0;
+ struct device *dev;
if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
return -ENOMEM;
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- init_MUTEX(&data->lock);
- new_client->adapter = adapter;
- new_client->driver = &pc87360_driver;
- new_client->flags = 0;
+ client = &data->client;
+ dev = &client->dev;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ mutex_init(&data->lock);
+ client->adapter = adapter;
+ client->driver = &pc87360_driver;
+ client->flags = 0;
data->fannr = 2;
data->innr = 0;
@@ -792,15 +877,15 @@
break;
}
- strcpy(new_client->name, name);
+ strlcpy(client->name, name, sizeof(client->name));
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
for (i = 0; i < 3; i++) {
if (((data->address[i] = extra_isa[i]))
&& !request_region(extra_isa[i], PC87360_EXTENT,
pc87360_driver.driver.name)) {
- dev_err(&new_client->dev, "Region 0x%x-0x%x already "
+ dev_err(&client->dev, "Region 0x%x-0x%x already "
"in use!\n", extra_isa[i],
extra_isa[i]+PC87360_EXTENT-1);
for (i--; i >= 0; i--)
@@ -814,7 +899,7 @@
if (data->fannr)
data->fan_conf = confreg[0] | (confreg[1] << 8);
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto ERROR2;
/* Use the correct reference voltage
@@ -828,7 +913,7 @@
PC87365_REG_TEMP_CONFIG);
}
data->in_vref = (i&0x02) ? 3025 : 2966;
- dev_dbg(&new_client->dev, "Using %s reference voltage\n",
+ dev_dbg(&client->dev, "Using %s reference voltage\n",
(i&0x02) ? "external" : "internal");
data->vid_conf = confreg[3];
@@ -847,154 +932,64 @@
if (devid == 0xe9 && data->address[1]) /* PC87366 */
use_thermistors = confreg[2] & 0x40;
- pc87360_init_client(new_client, use_thermistors);
+ pc87360_init_client(client, use_thermistors);
}
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR3;
}
if (data->innr) {
- device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in0_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in1_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in2_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in3_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in4_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in5_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in6_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in7_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in8_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in9_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_in10_status.dev_attr);
-
- device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
- device_create_file(&new_client->dev, &dev_attr_vrm);
- device_create_file(&new_client->dev, &dev_attr_alarms_in);
+ for (i = 0; i < 11; i++) {
+ device_create_file(dev, &in_input[i].dev_attr);
+ device_create_file(dev, &in_min[i].dev_attr);
+ device_create_file(dev, &in_max[i].dev_attr);
+ device_create_file(dev, &in_status[i].dev_attr);
+ }
+ device_create_file(dev, &dev_attr_cpu0_vid);
+ device_create_file(dev, &dev_attr_vrm);
+ device_create_file(dev, &dev_attr_alarms_in);
}
if (data->tempnr) {
- device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp1_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp2_status.dev_attr);
+ for (i = 0; i < data->tempnr; i++) {
+ device_create_file(dev, &temp_input[i].dev_attr);
+ device_create_file(dev, &temp_min[i].dev_attr);
+ device_create_file(dev, &temp_max[i].dev_attr);
+ device_create_file(dev, &temp_crit[i].dev_attr);
+ device_create_file(dev, &temp_status[i].dev_attr);
+ }
+ device_create_file(dev, &dev_attr_alarms_temp);
+ }
- device_create_file(&new_client->dev, &dev_attr_alarms_temp);
- }
- if (data->tempnr == 3) {
- device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp3_status.dev_attr);
- }
if (data->innr == 14) {
- device_create_file(&new_client->dev, &sensor_dev_attr_temp4_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp5_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp6_input.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp4_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp5_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp6_min.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp4_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp5_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp6_max.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp4_crit.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp5_crit.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp6_crit.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp4_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp5_status.dev_attr);
- device_create_file(&new_client->dev, &sensor_dev_attr_temp6_status.dev_attr);
+ for (i = 0; i < 3; i++) {
+ device_create_file(dev, &therm_input[i].dev_attr);
+ device_create_file(dev, &therm_min[i].dev_attr);
+ device_create_file(dev, &therm_max[i].dev_attr);
+ device_create_file(dev, &therm_crit[i].dev_attr);
+ device_create_file(dev, &therm_status[i].dev_attr);
+ }
}
- if (data->fannr) {
- if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) {
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_min.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_div.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_status.dev_attr);
+ for (i = 0; i < data->fannr; i++) {
+ if (FAN_CONFIG_MONITOR(data->fan_conf, i)) {
+ device_create_file(dev, &fan_input[i].dev_attr);
+ device_create_file(dev, &fan_min[i].dev_attr);
+ device_create_file(dev, &fan_div[i].dev_attr);
+ device_create_file(dev, &fan_status[i].dev_attr);
}
-
- if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) {
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan2_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan2_min.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan2_div.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan2_status.dev_attr);
- }
-
- if (FAN_CONFIG_CONTROL(data->fan_conf, 0))
- device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr);
- if (FAN_CONFIG_CONTROL(data->fan_conf, 1))
- device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr);
- }
- if (data->fannr == 3) {
- if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) {
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan3_input.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan3_min.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan3_div.dev_attr);
- device_create_file(&new_client->dev,
- &sensor_dev_attr_fan3_status.dev_attr);
- }
-
- if (FAN_CONFIG_CONTROL(data->fan_conf, 2))
- device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr);
+ if (FAN_CONFIG_CONTROL(data->fan_conf, i))
+ device_create_file(dev, &pwm[i].dev_attr);
}
return 0;
ERROR3:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
ERROR2:
for (i = 0; i < 3; i++) {
if (data->address[i]) {
@@ -1033,11 +1028,11 @@
{
int res;
- down(&(data->lock));
+ mutex_lock(&(data->lock));
if (bank != NO_BANK)
outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
res = inb_p(data->address[ldi] + reg);
- up(&(data->lock));
+ mutex_unlock(&(data->lock));
return res;
}
@@ -1045,11 +1040,11 @@
static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
u8 reg, u8 value)
{
- down(&(data->lock));
+ mutex_lock(&(data->lock));
if (bank != NO_BANK)
outb_p(bank, data->address[ldi] + PC87365_REG_BANK);
outb_p(value, data->address[ldi] + reg);
- up(&(data->lock));
+ mutex_unlock(&(data->lock));
}
static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
@@ -1071,7 +1066,7 @@
}
nr = data->innr < 11 ? data->innr : 11;
- for (i=0; i<nr; i++) {
+ for (i = 0; i < nr; i++) {
if (init >= init_in[i]) {
/* Forcibly enable voltage channel */
reg = pc87360_read_value(data, LD_IN, i,
@@ -1088,14 +1083,14 @@
/* We can't blindly trust the Super-I/O space configuration bit,
most BIOS won't set it properly */
- for (i=11; i<data->innr; i++) {
+ for (i = 11; i < data->innr; i++) {
reg = pc87360_read_value(data, LD_IN, i,
PC87365_REG_TEMP_STATUS);
use_thermistors = use_thermistors || (reg & 0x01);
}
i = use_thermistors ? 2 : 0;
- for (; i<data->tempnr; i++) {
+ for (; i < data->tempnr; i++) {
if (init >= init_temp[i]) {
/* Forcibly enable temperature channel */
reg = pc87360_read_value(data, LD_TEMP, i,
@@ -1111,7 +1106,7 @@
}
if (use_thermistors) {
- for (i=11; i<data->innr; i++) {
+ for (i = 11; i < data->innr; i++) {
if (init >= init_in[i]) {
/* The pin may already be used by thermal
diodes */
@@ -1221,7 +1216,7 @@
struct pc87360_data *data = i2c_get_clientdata(client);
u8 i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Data update\n");
@@ -1321,7 +1316,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 8be5189..6f3fda7 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -60,6 +60,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/mutex.h>
#include <asm/io.h>
@@ -167,9 +168,9 @@
struct sis5595_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
char maxins; /* == 3 if temp enabled, otherwise == 4 */
@@ -192,8 +193,8 @@
static int sis5595_detect(struct i2c_adapter *adapter);
static int sis5595_detach_client(struct i2c_client *client);
-static int sis5595_read_value(struct i2c_client *client, u8 register);
-static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value);
+static int sis5595_read_value(struct i2c_client *client, u8 reg);
+static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value);
static struct sis5595_data *sis5595_update_device(struct device *dev);
static void sis5595_init_client(struct i2c_client *client);
@@ -231,10 +232,10 @@
struct sis5595_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -245,10 +246,10 @@
struct sis5595_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -310,10 +311,10 @@
struct sis5595_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_over = TEMP_TO_REG(val);
sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -329,10 +330,10 @@
struct sis5595_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_hyst = TEMP_TO_REG(val);
sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -364,10 +365,10 @@
struct sis5595_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -390,7 +391,7 @@
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
reg = sis5595_read_value(client, SIS5595_REG_FANDIV);
@@ -403,7 +404,7 @@
default:
dev_err(&client->dev, "fan_div value %ld not "
"supported. Choose one of 1, 2, 4 or 8!\n", val);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
@@ -419,7 +420,7 @@
data->fan_min[nr] =
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -527,7 +528,7 @@
new_client = &data->client;
new_client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
new_client->adapter = adapter;
new_client->driver = &sis5595_driver;
@@ -548,7 +549,7 @@
strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -635,20 +636,20 @@
int res;
struct sis5595_data *data = i2c_get_clientdata(client);
- down(&data->lock);
+ mutex_lock(&data->lock);
outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value)
{
struct sis5595_data *data = i2c_get_clientdata(client);
- down(&data->lock);
+ mutex_lock(&data->lock);
outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET);
outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
}
@@ -667,7 +668,7 @@
struct sis5595_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -707,7 +708,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 8663bbb..b608618 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -35,6 +35,7 @@
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <asm/io.h>
/* Address is autodetected, there is no default value */
@@ -92,9 +93,9 @@
struct smsc47b397_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
- struct semaphore update_lock;
+ struct mutex update_lock;
unsigned long last_updated; /* in jiffies */
int valid;
@@ -108,10 +109,10 @@
struct smsc47b397_data *data = i2c_get_clientdata(client);
int res;
- down(&data->lock);
+ mutex_lock(&data->lock);
outb(reg, client->addr);
res = inb_p(client->addr + 1);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
@@ -121,7 +122,7 @@
struct smsc47b397_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
dev_dbg(&client->dev, "starting device update...\n");
@@ -144,7 +145,7 @@
dev_dbg(&client->dev, "... device update complete\n");
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
@@ -254,14 +255,14 @@
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
new_client->adapter = adapter;
new_client->driver = &smsc47b397_driver;
new_client->flags = 0;
strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
if ((err = i2c_attach_client(new_client)))
goto error_free;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index d1e3ec0..7732aec 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -34,6 +34,7 @@
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <asm/io.h>
/* Address is autodetected, there is no default value */
@@ -102,9 +103,9 @@
struct smsc47m1_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
- struct semaphore update_lock;
+ struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
u8 fan[2]; /* Register value */
@@ -188,18 +189,18 @@
struct smsc47m1_data *data = i2c_get_clientdata(client);
long rpmdiv, val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
data->fan_preload[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -220,14 +221,14 @@
if (new_div == old_div) /* No change */
return count;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
switch (new_div) {
case 1: data->fan_div[nr] = 0; break;
case 2: data->fan_div[nr] = 1; break;
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
@@ -241,7 +242,7 @@
data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
data->fan_preload[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -257,12 +258,12 @@
if (val < 0 || val > 255)
return -EINVAL;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm[nr] &= 0x81; /* Preserve additional bits */
data->pwm[nr] |= PWM_TO_REG(val);
smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
data->pwm[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -278,12 +279,12 @@
if (val != 0 && val != 1)
return -EINVAL;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm[nr] &= 0xFE; /* preserve the other bits */
data->pwm[nr] |= !val;
smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
data->pwm[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -408,13 +409,13 @@
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
new_client->adapter = adapter;
new_client->driver = &smsc47m1_driver;
new_client->flags = 0;
strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* If no function is properly configured, there's no point in
actually registering the chip. */
@@ -512,17 +513,17 @@
{
int res;
- down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+ mutex_lock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
res = inb_p(client->addr + reg);
- up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+ mutex_unlock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
return res;
}
static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
{
- down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+ mutex_lock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
outb_p(value, client->addr + reg);
- up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
+ mutex_unlock(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
}
static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
@@ -531,7 +532,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct smsc47m1_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
int i;
@@ -558,7 +559,7 @@
data->last_updated = jiffies;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index cb01848..166298f 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -39,6 +39,7 @@
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/mutex.h>
#include <asm/io.h>
@@ -296,7 +297,7 @@
struct via686a_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -355,11 +356,11 @@
struct via686a_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, nr);
via686a_write_value(client, VIA686A_REG_IN_MIN(nr),
data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_in_max(struct device *dev, const char *buf,
@@ -368,11 +369,11 @@
struct via686a_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, nr);
via686a_write_value(client, VIA686A_REG_IN_MAX(nr),
data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_in_offset(offset) \
@@ -432,11 +433,11 @@
struct via686a_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_over[nr] = TEMP_TO_REG(val);
via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr],
data->temp_over[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_hyst(struct device *dev, const char *buf,
@@ -445,11 +446,11 @@
struct via686a_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_hyst[nr] = TEMP_TO_REG(val);
via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr],
data->temp_hyst[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
#define show_temp_offset(offset) \
@@ -508,10 +509,10 @@
struct via686a_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_fan_div(struct device *dev, const char *buf,
@@ -521,12 +522,12 @@
int val = simple_strtol(buf, NULL, 10);
int old;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
old = via686a_read_value(client, VIA686A_REG_FANDIV);
data->fan_div[nr] = DIV_TO_REG(val);
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
via686a_write_value(client, VIA686A_REG_FANDIV, old);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -639,7 +640,7 @@
strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto exit_free;
@@ -733,7 +734,7 @@
struct via686a_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -788,7 +789,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 271e9cb..686f3de 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -35,6 +35,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
static int force_addr;
@@ -148,7 +149,7 @@
struct vt8231_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
struct class_device *class_dev;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -223,10 +224,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
vt8231_write_value(client, regvoltmin[nr], data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -239,10 +240,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = SENSORS_LIMIT(((val * 958) / 10000) + 3, 0, 255);
vt8231_write_value(client, regvoltmax[nr], data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -281,11 +282,11 @@
struct vt8231_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
0, 255);
vt8231_write_value(client, regvoltmin[5], data->in_min[5]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -296,11 +297,11 @@
struct vt8231_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[5] = SENSORS_LIMIT(((val * 958 * 34) / (10000 * 54)) + 3,
0, 255);
vt8231_write_value(client, regvoltmax[5], data->in_max[5]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -351,10 +352,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
vt8231_write_value(client, regtempmax[0], data->temp_max[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
@@ -364,10 +365,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[0] = SENSORS_LIMIT((val + 500) / 1000, 0, 255);
vt8231_write_value(client, regtempmin[0], data->temp_min[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -407,10 +408,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
vt8231_write_value(client, regtempmax[nr], data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
@@ -422,10 +423,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[nr] = SENSORS_LIMIT(TEMP_MAXMIN_TO_REG(val), 0, 255);
vt8231_write_value(client, regtempmin[nr], data->temp_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -520,10 +521,10 @@
struct vt8231_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
vt8231_write_value(client, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -539,7 +540,7 @@
long min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
switch (val) {
case 1: data->fan_div[nr] = 0; break;
case 2: data->fan_div[nr] = 1; break;
@@ -548,7 +549,7 @@
default:
dev_err(&client->dev, "fan_div value %ld not supported."
"Choose one of 1, 2, 4 or 8!\n", val);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
@@ -558,7 +559,7 @@
old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
vt8231_write_value(client, VT8231_REG_FANDIV, old);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -660,7 +661,7 @@
/* Fill in the remaining client fields and put into the global list */
strlcpy(client->name, "vt8231", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(client)))
@@ -745,7 +746,7 @@
int i;
u16 low;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -804,7 +805,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 12d79f5..b6bd568 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -42,7 +42,9 @@
#include <linux/i2c.h>
#include <linux/i2c-isa.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
@@ -177,9 +179,9 @@
struct w83627ehf_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -230,7 +232,7 @@
struct w83627ehf_data *data = i2c_get_clientdata(client);
int res, word_sized = is_word_sized(reg);
- down(&data->lock);
+ mutex_lock(&data->lock);
w83627ehf_set_bank(client, reg);
outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
@@ -242,7 +244,7 @@
}
w83627ehf_reset_bank(client, reg);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
@@ -252,7 +254,7 @@
struct w83627ehf_data *data = i2c_get_clientdata(client);
int word_sized = is_word_sized(reg);
- down(&data->lock);
+ mutex_lock(&data->lock);
w83627ehf_set_bank(client, reg);
outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
@@ -264,7 +266,7 @@
outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
w83627ehf_reset_bank(client, reg);
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
}
@@ -322,7 +324,7 @@
struct w83627ehf_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
@@ -397,7 +399,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
@@ -407,9 +409,12 @@
#define show_fan_reg(reg) \
static ssize_t \
-show_##reg(struct device *dev, char *buf, int nr) \
+show_##reg(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
return sprintf(buf, "%d\n", \
fan_from_reg(data->reg[nr], \
div_from_reg(data->fan_div[nr]))); \
@@ -418,23 +423,28 @@
show_fan_reg(fan_min);
static ssize_t
-show_fan_div(struct device *dev, char *buf, int nr)
+show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct w83627ehf_data *data = w83627ehf_update_device(dev);
- return sprintf(buf, "%u\n",
- div_from_reg(data->fan_div[nr]));
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
}
static ssize_t
-store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
unsigned int val = simple_strtoul(buf, NULL, 10);
unsigned int reg;
u8 new_div;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!val) {
/* No min limit, alarm disabled */
data->fan_min[nr] = 255;
@@ -482,63 +492,46 @@
}
w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
-#define sysfs_fan_offset(offset) \
-static ssize_t \
-show_reg_fan_##offset(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_fan(dev, buf, offset-1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_reg_fan_##offset, NULL);
+static struct sensor_device_attribute sda_fan_input[] = {
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
+ SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
+ SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4),
+};
-#define sysfs_fan_min_offset(offset) \
-static ssize_t \
-show_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_fan_min(dev, buf, offset-1); \
-} \
-static ssize_t \
-store_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_fan_min(dev, buf, count, offset-1); \
-} \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_reg_fan##offset##_min, \
- store_reg_fan##offset##_min);
+static struct sensor_device_attribute sda_fan_min[] = {
+ SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 0),
+ SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 1),
+ SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 2),
+ SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 3),
+ SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
+ store_fan_min, 4),
+};
-#define sysfs_fan_div_offset(offset) \
-static ssize_t \
-show_reg_fan##offset##_div(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_fan_div(dev, buf, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
- show_reg_fan##offset##_div, NULL);
+static struct sensor_device_attribute sda_fan_div[] = {
+ SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
+ SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
+ SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
+ SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3),
+ SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4),
+};
-sysfs_fan_offset(1);
-sysfs_fan_min_offset(1);
-sysfs_fan_div_offset(1);
-sysfs_fan_offset(2);
-sysfs_fan_min_offset(2);
-sysfs_fan_div_offset(2);
-sysfs_fan_offset(3);
-sysfs_fan_min_offset(3);
-sysfs_fan_div_offset(3);
-sysfs_fan_offset(4);
-sysfs_fan_min_offset(4);
-sysfs_fan_div_offset(4);
-sysfs_fan_offset(5);
-sysfs_fan_min_offset(5);
-sysfs_fan_div_offset(5);
+static void device_create_file_fan(struct device *dev, int i)
+{
+ device_create_file(dev, &sda_fan_input[i].dev_attr);
+ device_create_file(dev, &sda_fan_div[i].dev_attr);
+ device_create_file(dev, &sda_fan_min[i].dev_attr);
+}
#define show_temp1_reg(reg) \
static ssize_t \
@@ -561,27 +554,24 @@
struct w83627ehf_data *data = i2c_get_clientdata(client); \
u32 val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->temp1_##reg = temp1_to_reg(val); \
w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
data->temp1_##reg); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_temp1_reg(OVER, max);
store_temp1_reg(HYST, max_hyst);
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL);
-static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR,
- show_temp1_max, store_temp1_max);
-static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR,
- show_temp1_max_hyst, store_temp1_max_hyst);
-
#define show_temp_reg(reg) \
static ssize_t \
-show_##reg (struct device *dev, char *buf, int nr) \
+show_##reg(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
return sprintf(buf, "%d\n", \
LM75_TEMP_FROM_REG(data->reg[nr])); \
}
@@ -591,55 +581,42 @@
#define store_temp_reg(REG, reg) \
static ssize_t \
-store_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+store_##reg(struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+ int nr = sensor_attr->index; \
u32 val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
data->reg[nr]); \
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_temp_reg(OVER, temp_max);
store_temp_reg(HYST, temp_max_hyst);
-#define sysfs_temp_offset(offset) \
-static ssize_t \
-show_reg_temp##offset (struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp(dev, buf, offset - 2); \
-} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_reg_temp##offset, NULL);
-
-#define sysfs_temp_reg_offset(reg, offset) \
-static ssize_t \
-show_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_temp_##reg(dev, buf, offset - 2); \
-} \
-static ssize_t \
-store_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- return store_temp_##reg(dev, buf, count, offset - 2); \
-} \
-static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
- show_reg_temp##offset##_##reg, \
- store_reg_temp##offset##_##reg);
-
-sysfs_temp_offset(2);
-sysfs_temp_reg_offset(max, 2);
-sysfs_temp_reg_offset(max_hyst, 2);
-sysfs_temp_offset(3);
-sysfs_temp_reg_offset(max, 3);
-sysfs_temp_reg_offset(max_hyst, 3);
+static struct sensor_device_attribute sda_temp[] = {
+ SENSOR_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0),
+ SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0),
+ SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 1),
+ SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1_max,
+ store_temp1_max, 0),
+ SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 0),
+ SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+ store_temp_max, 1),
+ SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1_max_hyst,
+ store_temp1_max_hyst, 0),
+ SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 0),
+ SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 1),
+};
/*
* Driver and client management
@@ -673,6 +650,7 @@
{
struct i2c_client *client;
struct w83627ehf_data *data;
+ struct device *dev;
int i, err = 0;
if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
@@ -689,14 +667,15 @@
client = &data->client;
i2c_set_clientdata(client, data);
client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
client->adapter = adapter;
client->driver = &w83627ehf_driver;
client->flags = 0;
+ dev = &client->dev;
strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the i2c layer a new client has arrived */
if ((err = i2c_attach_client(client)))
@@ -720,42 +699,18 @@
data->has_fan |= (1 << 4);
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&client->dev);
+ data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_detach;
}
- device_create_file(&client->dev, &dev_attr_fan1_input);
- device_create_file(&client->dev, &dev_attr_fan1_min);
- device_create_file(&client->dev, &dev_attr_fan1_div);
- device_create_file(&client->dev, &dev_attr_fan2_input);
- device_create_file(&client->dev, &dev_attr_fan2_min);
- device_create_file(&client->dev, &dev_attr_fan2_div);
- device_create_file(&client->dev, &dev_attr_fan3_input);
- device_create_file(&client->dev, &dev_attr_fan3_min);
- device_create_file(&client->dev, &dev_attr_fan3_div);
-
- if (data->has_fan & (1 << 3)) {
- device_create_file(&client->dev, &dev_attr_fan4_input);
- device_create_file(&client->dev, &dev_attr_fan4_min);
- device_create_file(&client->dev, &dev_attr_fan4_div);
+ for (i = 0; i < 5; i++) {
+ if (data->has_fan & (1 << i))
+ device_create_file_fan(dev, i);
}
- if (data->has_fan & (1 << 4)) {
- device_create_file(&client->dev, &dev_attr_fan5_input);
- device_create_file(&client->dev, &dev_attr_fan5_min);
- device_create_file(&client->dev, &dev_attr_fan5_div);
- }
-
- device_create_file(&client->dev, &dev_attr_temp1_input);
- device_create_file(&client->dev, &dev_attr_temp1_max);
- device_create_file(&client->dev, &dev_attr_temp1_max_hyst);
- device_create_file(&client->dev, &dev_attr_temp2_input);
- device_create_file(&client->dev, &dev_attr_temp2_max);
- device_create_file(&client->dev, &dev_attr_temp2_max_hyst);
- device_create_file(&client->dev, &dev_attr_temp3_input);
- device_create_file(&client->dev, &dev_attr_temp3_max);
- device_create_file(&client->dev, &dev_attr_temp3_max_hyst);
+ for (i = 0; i < ARRAY_SIZE(sda_temp); i++)
+ device_create_file(dev, &sda_temp[i].dev_attr);
return 0;
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 7ea441d..71fb7f1 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -28,6 +28,7 @@
w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
+ w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
For other winbond chips, and for i2c support in the above chips,
@@ -46,6 +47,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
@@ -62,7 +64,7 @@
static unsigned short address;
/* Insmod parameters */
-enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf };
+enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
static int reset;
module_param(reset, bool, 0);
@@ -100,6 +102,10 @@
#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */
+#define W83687THF_VID_EN 0x29 /* w83687thf only */
+#define W83687THF_VID_CFG 0xF0 /* w83687thf only */
+#define W83687THF_VID_DATA 0xF1 /* w83687thf only */
+
static inline void
superio_outb(int reg, int val)
{
@@ -138,6 +144,7 @@
#define W627THF_DEVID 0x82
#define W697_DEVID 0x60
#define W637_DEVID 0x70
+#define W687THF_DEVID 0x85
#define WINB_ACT_REG 0x30
#define WINB_BASE_REG 0x60
/* Constants specified below */
@@ -201,11 +208,11 @@
#define W83627HF_REG_PWM1 0x5A
#define W83627HF_REG_PWM2 0x5B
-#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */
-#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */
-#define W83627THF_REG_PWM3 0x11 /* 637HF too */
+#define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */
+#define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */
+#define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */
-#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */
+#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */
static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
@@ -285,10 +292,10 @@
struct w83627hf_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -318,16 +325,15 @@
Default = 3435.
Other Betas unimplemented */
u8 vrm;
- u8 vrm_ovt; /* Register value, 627thf & 637hf only */
+ u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
};
static int w83627hf_detect(struct i2c_adapter *adapter);
static int w83627hf_detach_client(struct i2c_client *client);
-static int w83627hf_read_value(struct i2c_client *client, u16 register);
-static int w83627hf_write_value(struct i2c_client *client, u16 register,
- u16 value);
+static int w83627hf_read_value(struct i2c_client *client, u16 reg);
+static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value);
static struct w83627hf_data *w83627hf_update_device(struct device *dev);
static void w83627hf_init_client(struct i2c_client *client);
@@ -360,12 +366,12 @@
\
val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
\
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_in_reg(MIN, min)
@@ -413,7 +419,8 @@
long in0;
if ((data->vrm_ovt & 0x01) &&
- (w83627thf == data->type || w83637hf == data->type))
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
/* use VRM9 calculation */
in0 = (long)((reg * 488 + 70000 + 50) / 100);
@@ -451,10 +458,11 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ((data->vrm_ovt & 0x01) &&
- (w83627thf == data->type || w83637hf == data->type))
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
/* use VRM9 calculation */
data->in_min[0] =
@@ -465,7 +473,7 @@
data->in_min[0] = IN_TO_REG(val);
w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -478,10 +486,11 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ((data->vrm_ovt & 0x01) &&
- (w83627thf == data->type || w83637hf == data->type))
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
/* use VRM9 calculation */
data->in_max[0] =
@@ -492,7 +501,7 @@
data->in_max[0] = IN_TO_REG(val);
w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -529,13 +538,13 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr - 1] =
FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr),
data->fan_min[nr - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -597,7 +606,7 @@
\
val = simple_strtoul(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
\
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
@@ -609,7 +618,7 @@
data->temp_##reg); \
} \
\
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_temp_reg(OVER, max);
@@ -718,7 +727,7 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
data->beep_mask = BEEP_MASK_TO_REG(val);
@@ -736,7 +745,7 @@
w83627hf_write_value(client, W83781D_REG_BEEP_INTS2,
val2 | data->beep_enable << 7);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -783,7 +792,7 @@
u8 reg;
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
/* Save fan_min */
min = FAN_FROM_REG(data->fan_min[nr],
@@ -805,7 +814,7 @@
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -848,7 +857,7 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (data->type == w83627thf) {
/* bits 0-3 are reserved in 627THF */
@@ -865,7 +874,7 @@
data->pwm[nr - 1]);
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -907,7 +916,7 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
switch (val) {
case 1: /* PII/Celeron diode */
@@ -941,7 +950,7 @@
break;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -980,7 +989,8 @@
if(val != W627_DEVID &&
val != W627THF_DEVID &&
val != W697_DEVID &&
- val != W637_DEVID) {
+ val != W637_DEVID &&
+ val != W687THF_DEVID) {
superio_exit();
return -ENODEV;
}
@@ -1034,6 +1044,8 @@
kind = w83627thf;
else if(val == W637_DEVID)
kind = w83637hf;
+ else if (val == W687THF_DEVID)
+ kind = w83687thf;
else {
dev_info(&adapter->dev,
"Unsupported chip (dev_id=0x%02X).\n", val);
@@ -1057,7 +1069,7 @@
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
new_client->adapter = adapter;
new_client->driver = &w83627hf_driver;
new_client->flags = 0;
@@ -1071,13 +1083,15 @@
client_name = "w83697hf";
} else if (kind == w83637hf) {
client_name = "w83637hf";
+ } else if (kind == w83687thf) {
+ client_name = "w83687thf";
}
/* Fill in the remaining client fields and put into the global list */
strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -1106,7 +1120,7 @@
device_create_file_in(new_client, 2);
device_create_file_in(new_client, 3);
device_create_file_in(new_client, 4);
- if (kind != w83627thf && kind != w83637hf) {
+ if (kind == w83627hf || kind == w83697hf) {
device_create_file_in(new_client, 5);
device_create_file_in(new_client, 6);
}
@@ -1139,7 +1153,7 @@
device_create_file_pwm(new_client, 1);
device_create_file_pwm(new_client, 2);
- if (kind == w83627thf || kind == w83637hf)
+ if (kind == w83627thf || kind == w83637hf || kind == w83687thf)
device_create_file_pwm(new_client, 3);
device_create_file_sensor(new_client, 1);
@@ -1187,7 +1201,7 @@
struct w83627hf_data *data = i2c_get_clientdata(client);
int res, word_sized;
- down(&data->lock);
+ mutex_lock(&data->lock);
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x50)
@@ -1213,7 +1227,7 @@
client->addr + W83781D_ADDR_REG_OFFSET);
outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
}
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
@@ -1247,12 +1261,39 @@
return res;
}
+static int w83687thf_read_vid(struct i2c_client *client)
+{
+ int res = 0xff;
+
+ superio_enter();
+ superio_select(W83627HF_LD_HWM);
+
+ /* Make sure these GPIO pins are enabled */
+ if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
+ dev_dbg(&client->dev, "VID disabled, no VID function\n");
+ goto exit;
+ }
+
+ /* Make sure the pins are configured for input */
+ if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
+ dev_dbg(&client->dev, "VID configured as output, "
+ "no VID function\n");
+ goto exit;
+ }
+
+ res = superio_inb(W83687THF_VID_DATA) & 0x3f;
+
+exit:
+ superio_exit();
+ return res;
+}
+
static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value)
{
struct w83627hf_data *data = i2c_get_clientdata(client);
int word_sized;
- down(&data->lock);
+ mutex_lock(&data->lock);
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
&& (((reg & 0x00ff) == 0x53)
@@ -1277,7 +1318,7 @@
client->addr + W83781D_ADDR_REG_OFFSET);
outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
}
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
}
@@ -1324,10 +1365,13 @@
data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
} else if (w83627thf == data->type) {
data->vid = w83627thf_read_gpio5(client);
+ } else if (w83687thf == data->type) {
+ data->vid = w83687thf_read_vid(client);
}
/* Read VRM & OVT Config only once */
- if (w83627thf == data->type || w83637hf == data->type) {
+ if (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type) {
data->vrm_ovt =
w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
}
@@ -1387,14 +1431,14 @@
struct w83627hf_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
for (i = 0; i <= 8; i++) {
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
- ((data->type == w83627thf || data->type == w83637hf)
+ ((data->type != w83627hf && data->type != w83697hf)
&& (i == 5 || i == 6)))
continue;
data->in[i] =
@@ -1470,7 +1514,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 64c1f8a..e4c7003 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -42,6 +42,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/mutex.h>
#include <asm/io.h>
#include "lm75.h"
@@ -56,6 +57,10 @@
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
+
static int init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -226,10 +231,10 @@
struct w83781d_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore lock;
+ struct mutex lock;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -267,9 +272,8 @@
static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
static int w83781d_detach_client(struct i2c_client *client);
-static int w83781d_read_value(struct i2c_client *client, u16 register);
-static int w83781d_write_value(struct i2c_client *client, u16 register,
- u16 value);
+static int w83781d_read_value(struct i2c_client *client, u16 reg);
+static int w83781d_write_value(struct i2c_client *client, u16 reg, u16 value);
static struct w83781d_data *w83781d_update_device(struct device *dev);
static void w83781d_init_client(struct i2c_client *client);
@@ -311,11 +315,11 @@
\
val = simple_strtoul(buf, NULL, 10) / 10; \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
\
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_in_reg(MIN, min);
@@ -381,13 +385,13 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->fan_min[nr - 1] =
FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
data->fan_min[nr - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -446,7 +450,7 @@
\
val = simple_strtol(buf, NULL, 10); \
\
- down(&data->update_lock); \
+ mutex_lock(&data->update_lock); \
\
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
@@ -458,7 +462,7 @@
data->temp_##reg); \
} \
\
- up(&data->update_lock); \
+ mutex_unlock(&data->update_lock); \
return count; \
}
store_temp_reg(OVER, max);
@@ -571,7 +575,7 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
@@ -592,7 +596,7 @@
w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
val2 | data->beep_enable << 7);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -637,7 +641,7 @@
u8 reg;
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
/* Save fan_min */
min = FAN_FROM_REG(data->fan_min[nr],
@@ -662,7 +666,7 @@
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -709,10 +713,10 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->pwm[nr - 1] = PWM_TO_REG(val);
w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -725,7 +729,7 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
switch (val) {
case 0:
@@ -742,11 +746,11 @@
break;
default:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return -EINVAL;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -808,7 +812,7 @@
val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
switch (val) {
case 1: /* PII/Celeron diode */
@@ -841,7 +845,7 @@
break;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -1073,7 +1077,7 @@
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
- init_MUTEX(&data->lock);
+ mutex_init(&data->lock);
new_client->adapter = adapter;
new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
new_client->flags = 0;
@@ -1178,7 +1182,7 @@
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -1325,7 +1329,7 @@
int res, word_sized, bank;
struct i2c_client *cl;
- down(&data->lock);
+ mutex_lock(&data->lock);
if (i2c_is_isa_client(client)) {
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
@@ -1383,7 +1387,7 @@
if (bank > 2)
i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
}
- up(&data->lock);
+ mutex_unlock(&data->lock);
return res;
}
@@ -1394,7 +1398,7 @@
int word_sized, bank;
struct i2c_client *cl;
- down(&data->lock);
+ mutex_lock(&data->lock);
if (i2c_is_isa_client(client)) {
word_sized = (((reg & 0xff00) == 0x100)
|| ((reg & 0xff00) == 0x200))
@@ -1447,7 +1451,7 @@
if (bank > 2)
i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
}
- up(&data->lock);
+ mutex_unlock(&data->lock);
return 0;
}
@@ -1459,8 +1463,17 @@
int type = data->type;
u8 tmp;
- if (init && type != as99127f) { /* this resets registers we don't have
+ if (reset && type != as99127f) { /* this resets registers we don't have
documentation for on the as99127f */
+ /* Resetting the chip has been the default for a long time,
+ but it causes the BIOS initializations (fan clock dividers,
+ thermal sensor types...) to be lost, so it is now optional.
+ It might even go away if nobody reports it as being useful,
+ as I see very little reason why this would be needed at
+ all. */
+ dev_info(&client->dev, "If reset=1 solved a problem you were "
+ "having, please report!\n");
+
/* save these registers */
i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
@@ -1477,6 +1490,13 @@
w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
}
+ /* Disable power-on abnormal beep, as advised by the datasheet.
+ Already done if reset=1. */
+ if (init && !reset && type != as99127f) {
+ i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+ w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+ }
+
data->vrm = vid_which_vrm();
if ((type != w83781d) && (type != as99127f)) {
@@ -1533,7 +1553,7 @@
struct w83781d_data *data = i2c_get_clientdata(client);
int i;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -1641,7 +1661,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index a2f6bb6..6865c64 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -43,6 +43,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
@@ -271,7 +272,7 @@
struct class_device *class_dev;
enum chips type;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -382,30 +383,40 @@
store_in_reg(MIN, min);
store_in_reg(MAX, max);
-#define sysfs_in_reg(offset) \
-static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \
- NULL, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in_min, store_in_min, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in_max, store_in_max, offset);
+static struct sensor_device_attribute sda_in_input[] = {
+ SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
+ SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
+ SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
+};
+static struct sensor_device_attribute sda_in_min[] = {
+ SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
+ SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
+ SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
+ SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
+ SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
+ SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
+ SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
+ SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
+ SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
+};
+static struct sensor_device_attribute sda_in_max[] = {
+ SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
+ SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
+ SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
+ SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
+ SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
+ SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
+ SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
+ SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
+ SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
+};
-sysfs_in_reg(0);
-sysfs_in_reg(1);
-sysfs_in_reg(2);
-sysfs_in_reg(3);
-sysfs_in_reg(4);
-sysfs_in_reg(5);
-sysfs_in_reg(6);
-sysfs_in_reg(7);
-sysfs_in_reg(8);
-
-#define device_create_file_in(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_in##offset##_input.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_in##offset##_max.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_in##offset##_min.dev_attr); \
-} while (0)
#define show_fan_reg(reg) \
static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \
@@ -486,28 +497,33 @@
return count;
}
-#define sysfs_fan(offset) \
-static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \
- offset); \
-static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
- show_fan_div, store_fan_div, offset); \
-static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_min, store_fan_min, offset);
-
-sysfs_fan(1);
-sysfs_fan(2);
-sysfs_fan(3);
-sysfs_fan(4);
-sysfs_fan(5);
-sysfs_fan(6);
-sysfs_fan(7);
-
-#define device_create_file_fan(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_input.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_div.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_min.dev_attr); \
-} while (0)
+static struct sensor_device_attribute sda_fan_input[] = {
+ SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1),
+ SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2),
+ SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3),
+ SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4),
+ SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5),
+ SENSOR_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6),
+ SENSOR_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7),
+};
+static struct sensor_device_attribute sda_fan_min[] = {
+ SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 1),
+ SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 2),
+ SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 3),
+ SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 4),
+ SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 5),
+ SENSOR_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 6),
+ SENSOR_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 7),
+};
+static struct sensor_device_attribute sda_fan_div[] = {
+ SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 1),
+ SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 2),
+ SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 3),
+ SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 4),
+ SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 5),
+ SENSOR_ATTR(fan6_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 6),
+ SENSOR_ATTR(fan7_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 7),
+};
/* read/write the temperature1, includes measured value and limits */
@@ -539,21 +555,6 @@
return count;
}
-
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1,
- store_temp1, 1);
-static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1,
- store_temp1, 2);
-
-#define device_create_file_temp1(client) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_temp1_max_hyst.dev_attr); \
-} while (0)
-
-
/* read/write the temperature2-3, includes measured value and limits */
static ssize_t show_temp23(struct device *dev, struct device_attribute *attr,
@@ -590,25 +591,23 @@
return count;
}
-#define sysfs_temp23(name,idx) \
-static SENSOR_DEVICE_ATTR_2(name##_input, S_IRUGO, show_temp23, NULL, \
- idx, 0); \
-static SENSOR_DEVICE_ATTR_2(name##_max, S_IRUGO | S_IWUSR, \
- show_temp23, store_temp23, idx, 2); \
-static SENSOR_DEVICE_ATTR_2(name##_max_hyst, S_IRUGO | S_IWUSR, \
- show_temp23, store_temp23, idx, 4);
+static struct sensor_device_attribute_2 sda_temp_input[] = {
+ SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0),
+ SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0),
+ SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0),
+};
-sysfs_temp23(temp2,0)
-sysfs_temp23(temp3,1)
+static struct sensor_device_attribute_2 sda_temp_max[] = {
+ SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 1),
+ SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 2),
+ SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 2),
+};
-#define device_create_file_temp_add(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_input.dev_attr); \
-device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_max.dev_attr); \
-device_create_file(&client->dev, \
-&sensor_dev_attr_temp##offset##_max_hyst.dev_attr); \
-} while (0)
-
+static struct sensor_device_attribute_2 sda_temp_max_hyst[] = {
+ SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 2),
+ SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 4),
+ SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 4),
+};
/* get reatime status of all sensors items: voltage, temp, fan */
static ssize_t
@@ -620,10 +619,6 @@
static
DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
-#define device_create_file_alarms(client) \
-device_create_file(&client->dev, &dev_attr_alarms);
-
-
static ssize_t
show_pwm(struct device *dev, struct device_attribute *attr,
@@ -711,26 +706,19 @@
return count;
}
-#define sysfs_pwm(offset) \
-static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- show_pwm, store_pwm, offset); \
-static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
- show_pwmenable, store_pwmenable, offset); \
-
-sysfs_pwm(1);
-sysfs_pwm(2);
-sysfs_pwm(3);
-
-
-#define device_create_file_pwm(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_pwm##offset.dev_attr); \
-} while (0)
-
-#define device_create_file_pwmenable(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_enable.dev_attr); \
-} while (0)
+static struct sensor_device_attribute sda_pwm[] = {
+ SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
+ SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2),
+ SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3),
+};
+static struct sensor_device_attribute sda_pwm_enable[] = {
+ SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ show_pwmenable, store_pwmenable, 1),
+ SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
+ show_pwmenable, store_pwmenable, 2),
+ SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
+ show_pwmenable, store_pwmenable, 3),
+};
static ssize_t
@@ -764,18 +752,14 @@
return count;
}
-#define sysfs_pwm_mode(offset) \
-static SENSOR_DEVICE_ATTR(pwm##offset##_mode, S_IRUGO | S_IWUSR, \
- show_pwm_mode, store_pwm_mode, offset);
-
-sysfs_pwm_mode(1);
-sysfs_pwm_mode(2);
-sysfs_pwm_mode(3);
-
-#define device_create_file_pwm_mode(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_mode.dev_attr); \
-} while (0)
+static struct sensor_device_attribute sda_pwm_mode[] = {
+ SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO,
+ show_pwm_mode, store_pwm_mode, 1),
+ SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO,
+ show_pwm_mode, store_pwm_mode, 2),
+ SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO,
+ show_pwm_mode, store_pwm_mode, 3),
+};
static ssize_t
@@ -788,12 +772,6 @@
static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
-#define device_create_file_chassis(client) \
-do { \
-device_create_file(&client->dev, &dev_attr_chassis); \
-} while (0)
-
-
static ssize_t
show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -824,13 +802,6 @@
static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
show_chassis_clear, store_chassis_clear);
-#define device_create_file_chassis_clear(client) \
-do { \
-device_create_file(&client->dev, &dev_attr_chassis_clear); \
-} while (0)
-
-
-
/* For Smart Fan I / Thermal Cruise */
static ssize_t
show_thermal_cruise(struct device *dev, struct device_attribute *attr,
@@ -864,20 +835,14 @@
return count;
}
-#define sysfs_thermal_cruise(offset) \
-static SENSOR_DEVICE_ATTR(thermal_cruise##offset, S_IRUGO | S_IWUSR, \
- show_thermal_cruise, store_thermal_cruise, offset);
-
-sysfs_thermal_cruise(1);
-sysfs_thermal_cruise(2);
-sysfs_thermal_cruise(3);
-
-#define device_create_file_thermal_cruise(client, offset) \
-do { \
-device_create_file(&client->dev, \
-&sensor_dev_attr_thermal_cruise##offset.dev_attr); \
-} while (0)
-
+static struct sensor_device_attribute sda_thermal_cruise[] = {
+ SENSOR_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO,
+ show_thermal_cruise, store_thermal_cruise, 1),
+ SENSOR_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO,
+ show_thermal_cruise, store_thermal_cruise, 2),
+ SENSOR_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO,
+ show_thermal_cruise, store_thermal_cruise, 3),
+};
/* For Smart Fan I/Thermal Cruise and Smart Fan II */
static ssize_t
@@ -916,19 +881,14 @@
return count;
}
-#define sysfs_tolerance(offset) \
-static SENSOR_DEVICE_ATTR(tolerance##offset, S_IRUGO | S_IWUSR, \
- show_tolerance, store_tolerance, offset);
-
-sysfs_tolerance(1);
-sysfs_tolerance(2);
-sysfs_tolerance(3);
-
-#define device_create_file_tolerance(client, offset) \
-do { \
-device_create_file(&client->dev, &sensor_dev_attr_tolerance##offset.dev_attr); \
-} while (0)
-
+static struct sensor_device_attribute sda_tolerance[] = {
+ SENSOR_ATTR(tolerance1, S_IWUSR | S_IRUGO,
+ show_tolerance, store_tolerance, 1),
+ SENSOR_ATTR(tolerance2, S_IWUSR | S_IRUGO,
+ show_tolerance, store_tolerance, 2),
+ SENSOR_ATTR(tolerance3, S_IWUSR | S_IRUGO,
+ show_tolerance, store_tolerance, 3),
+};
/* For Smart Fan II */
static ssize_t
@@ -964,28 +924,34 @@
return count;
}
-#define sysfs_sf2_point(offset, index) \
-static SENSOR_DEVICE_ATTR_2(sf2_point##offset##_fan##index, S_IRUGO | S_IWUSR, \
- show_sf2_point, store_sf2_point, offset, index);
+static struct sensor_device_attribute_2 sda_sf2_point[] = {
+ SENSOR_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 1, 1),
+ SENSOR_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 2, 1),
+ SENSOR_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 3, 1),
+ SENSOR_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 4, 1),
-sysfs_sf2_point(1, 1); /* Fan1 */
-sysfs_sf2_point(2, 1); /* Fan1 */
-sysfs_sf2_point(3, 1); /* Fan1 */
-sysfs_sf2_point(4, 1); /* Fan1 */
-sysfs_sf2_point(1, 2); /* Fan2 */
-sysfs_sf2_point(2, 2); /* Fan2 */
-sysfs_sf2_point(3, 2); /* Fan2 */
-sysfs_sf2_point(4, 2); /* Fan2 */
-sysfs_sf2_point(1, 3); /* Fan3 */
-sysfs_sf2_point(2, 3); /* Fan3 */
-sysfs_sf2_point(3, 3); /* Fan3 */
-sysfs_sf2_point(4, 3); /* Fan3 */
+ SENSOR_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 1, 2),
+ SENSOR_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 2, 2),
+ SENSOR_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 3, 2),
+ SENSOR_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 4, 2),
-#define device_create_file_sf2_point(client, offset, index) \
-do { \
-device_create_file(&client->dev, \
-&sensor_dev_attr_sf2_point##offset##_fan##index.dev_attr); \
-} while (0)
+ SENSOR_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 1, 3),
+ SENSOR_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 2, 3),
+ SENSOR_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 3, 3),
+ SENSOR_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_point, store_sf2_point, 4, 3),
+};
static ssize_t
@@ -1026,26 +992,28 @@
return count;
}
-#define sysfs_sf2_level(offset, index) \
-static SENSOR_DEVICE_ATTR_2(sf2_level##offset##_fan##index, S_IRUGO | S_IWUSR, \
- show_sf2_level, store_sf2_level, offset, index);
+static struct sensor_device_attribute_2 sda_sf2_level[] = {
+ SENSOR_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 1, 1),
+ SENSOR_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 2, 1),
+ SENSOR_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 3, 1),
-sysfs_sf2_level(1, 1); /* Fan1 */
-sysfs_sf2_level(2, 1); /* Fan1 */
-sysfs_sf2_level(3, 1); /* Fan1 */
-sysfs_sf2_level(1, 2); /* Fan2 */
-sysfs_sf2_level(2, 2); /* Fan2 */
-sysfs_sf2_level(3, 2); /* Fan2 */
-sysfs_sf2_level(1, 3); /* Fan3 */
-sysfs_sf2_level(2, 3); /* Fan3 */
-sysfs_sf2_level(3, 3); /* Fan3 */
+ SENSOR_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 1, 2),
+ SENSOR_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 2, 2),
+ SENSOR_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 3, 2),
-#define device_create_file_sf2_level(client, offset, index) \
-do { \
-device_create_file(&client->dev, \
-&sensor_dev_attr_sf2_level##offset##_fan##index.dev_attr); \
-} while (0)
-
+ SENSOR_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 1, 3),
+ SENSOR_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 2, 3),
+ SENSOR_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR,
+ show_sf2_level, store_sf2_level, 3, 3),
+};
/* This function is called when:
* w83792d_driver is inserted (when this module is loaded), for each
@@ -1147,12 +1115,19 @@
return err;
}
+static void device_create_file_fan(struct device *dev, int i)
+{
+ device_create_file(dev, &sda_fan_input[i].dev_attr);
+ device_create_file(dev, &sda_fan_div[i].dev_attr);
+ device_create_file(dev, &sda_fan_min[i].dev_attr);
+}
static int
w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i = 0, val1 = 0, val2;
- struct i2c_client *new_client;
+ struct i2c_client *client;
+ struct device *dev;
struct w83792d_data *data;
int err = 0;
const char *client_name = "";
@@ -1170,12 +1145,13 @@
goto ERROR0;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &w83792d_driver;
- new_client->flags = 0;
+ client = &data->client;
+ dev = &client->dev;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &w83792d_driver;
+ client->flags = 0;
/* Now, we do the remaining detection. */
@@ -1184,13 +1160,12 @@
force_*=... parameter, and the Winbond will be reset to the right
bank. */
if (kind < 0) {
- if (w83792d_read_value(new_client, W83792D_REG_CONFIG) & 0x80) {
- dev_warn(&new_client->dev, "Detection failed at step "
- "3\n");
+ if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
+ dev_warn(dev, "Detection failed at step 3\n");
goto ERROR1;
}
- val1 = w83792d_read_value(new_client, W83792D_REG_BANK);
- val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN);
+ val1 = w83792d_read_value(client, W83792D_REG_BANK);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
/* Check for Winbond ID if in bank 0 */
if (!(val1 & 0x07)) { /* is Bank0 */
if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
@@ -1200,34 +1175,33 @@
}
/* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
should match */
- if (w83792d_read_value(new_client,
+ if (w83792d_read_value(client,
W83792D_REG_I2C_ADDR) != address) {
- dev_warn(&new_client->dev, "Detection failed "
- "at step 5\n");
+ dev_warn(dev, "Detection failed at step 5\n");
goto ERROR1;
}
}
/* We have either had a force parameter, or we have already detected the
Winbond. Put it now into bank 0 and Vendor ID High Byte */
- w83792d_write_value(new_client,
+ w83792d_write_value(client,
W83792D_REG_BANK,
- (w83792d_read_value(new_client,
+ (w83792d_read_value(client,
W83792D_REG_BANK) & 0x78) | 0x80);
/* Determine the chip type. */
if (kind <= 0) {
/* get vendor ID */
- val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
if (val2 != 0x5c) { /* the vendor is NOT Winbond */
goto ERROR1;
}
- val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID);
+ val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
if (val1 == 0x7a) {
kind = w83792d;
} else {
if (kind == 0)
- dev_warn(&new_client->dev,
+ dev_warn(dev,
"w83792d: Ignoring 'force' parameter for"
" unknown chip at adapter %d, address"
" 0x%02x\n", i2c_adapter_id(adapter),
@@ -1239,120 +1213,86 @@
if (kind == w83792d) {
client_name = "w83792d";
} else {
- dev_err(&new_client->dev, "w83792d: Internal error: unknown"
+ dev_err(dev, "w83792d: Internal error: unknown"
" kind (%d)?!?", kind);
goto ERROR1;
}
/* Fill in the remaining client fields and put into the global list */
- strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+ strlcpy(client->name, client_name, I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto ERROR1;
if ((err = w83792d_detect_subclients(adapter, address,
- kind, new_client)))
+ kind, client)))
goto ERROR2;
/* Initialize the chip */
- w83792d_init_client(new_client);
+ w83792d_init_client(client);
/* A few vars need to be filled upon startup */
for (i = 0; i < 7; i++) {
- data->fan_min[i] = w83792d_read_value(new_client,
+ data->fan_min[i] = w83792d_read_value(client,
W83792D_REG_FAN_MIN[i]);
}
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR3;
}
- device_create_file_in(new_client, 0);
- device_create_file_in(new_client, 1);
- device_create_file_in(new_client, 2);
- device_create_file_in(new_client, 3);
- device_create_file_in(new_client, 4);
- device_create_file_in(new_client, 5);
- device_create_file_in(new_client, 6);
- device_create_file_in(new_client, 7);
- device_create_file_in(new_client, 8);
-
- device_create_file_fan(new_client, 1);
- device_create_file_fan(new_client, 2);
- device_create_file_fan(new_client, 3);
+ for (i = 0; i < 9; i++) {
+ device_create_file(dev, &sda_in_input[i].dev_attr);
+ device_create_file(dev, &sda_in_max[i].dev_attr);
+ device_create_file(dev, &sda_in_min[i].dev_attr);
+ }
+ for (i = 0; i < 3; i++)
+ device_create_file_fan(dev, i);
/* Read GPIO enable register to check if pins for fan 4,5 are used as
GPIO */
- val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN);
+ val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN);
if (!(val1 & 0x40))
- device_create_file_fan(new_client, 4);
+ device_create_file_fan(dev, 3);
if (!(val1 & 0x20))
- device_create_file_fan(new_client, 5);
+ device_create_file_fan(dev, 4);
- val1 = w83792d_read_value(new_client, W83792D_REG_PIN);
+ val1 = w83792d_read_value(client, W83792D_REG_PIN);
if (val1 & 0x40)
- device_create_file_fan(new_client, 6);
+ device_create_file_fan(dev, 5);
if (val1 & 0x04)
- device_create_file_fan(new_client, 7);
+ device_create_file_fan(dev, 6);
- device_create_file_temp1(new_client); /* Temp1 */
- device_create_file_temp_add(new_client, 2); /* Temp2 */
- device_create_file_temp_add(new_client, 3); /* Temp3 */
+ for (i = 0; i < 3; i++) {
+ device_create_file(dev, &sda_temp_input[i].dev_attr);
+ device_create_file(dev, &sda_temp_max[i].dev_attr);
+ device_create_file(dev, &sda_temp_max_hyst[i].dev_attr);
+ device_create_file(dev, &sda_thermal_cruise[i].dev_attr);
+ device_create_file(dev, &sda_tolerance[i].dev_attr);
+ }
- device_create_file_alarms(new_client);
+ for (i = 0; i < ARRAY_SIZE(sda_pwm); i++) {
+ device_create_file(dev, &sda_pwm[i].dev_attr);
+ device_create_file(dev, &sda_pwm_enable[i].dev_attr);
+ device_create_file(dev, &sda_pwm_mode[i].dev_attr);
+ }
- device_create_file_pwm(new_client, 1);
- device_create_file_pwm(new_client, 2);
- device_create_file_pwm(new_client, 3);
+ device_create_file(dev, &dev_attr_alarms);
+ device_create_file(dev, &dev_attr_chassis);
+ device_create_file(dev, &dev_attr_chassis_clear);
- device_create_file_pwmenable(new_client, 1);
- device_create_file_pwmenable(new_client, 2);
- device_create_file_pwmenable(new_client, 3);
+ for (i = 0; i < ARRAY_SIZE(sda_sf2_point); i++)
+ device_create_file(dev, &sda_sf2_point[i].dev_attr);
- device_create_file_pwm_mode(new_client, 1);
- device_create_file_pwm_mode(new_client, 2);
- device_create_file_pwm_mode(new_client, 3);
-
- device_create_file_chassis(new_client);
- device_create_file_chassis_clear(new_client);
-
- device_create_file_thermal_cruise(new_client, 1);
- device_create_file_thermal_cruise(new_client, 2);
- device_create_file_thermal_cruise(new_client, 3);
-
- device_create_file_tolerance(new_client, 1);
- device_create_file_tolerance(new_client, 2);
- device_create_file_tolerance(new_client, 3);
-
- device_create_file_sf2_point(new_client, 1, 1); /* Fan1 */
- device_create_file_sf2_point(new_client, 2, 1); /* Fan1 */
- device_create_file_sf2_point(new_client, 3, 1); /* Fan1 */
- device_create_file_sf2_point(new_client, 4, 1); /* Fan1 */
- device_create_file_sf2_point(new_client, 1, 2); /* Fan2 */
- device_create_file_sf2_point(new_client, 2, 2); /* Fan2 */
- device_create_file_sf2_point(new_client, 3, 2); /* Fan2 */
- device_create_file_sf2_point(new_client, 4, 2); /* Fan2 */
- device_create_file_sf2_point(new_client, 1, 3); /* Fan3 */
- device_create_file_sf2_point(new_client, 2, 3); /* Fan3 */
- device_create_file_sf2_point(new_client, 3, 3); /* Fan3 */
- device_create_file_sf2_point(new_client, 4, 3); /* Fan3 */
-
- device_create_file_sf2_level(new_client, 1, 1); /* Fan1 */
- device_create_file_sf2_level(new_client, 2, 1); /* Fan1 */
- device_create_file_sf2_level(new_client, 3, 1); /* Fan1 */
- device_create_file_sf2_level(new_client, 1, 2); /* Fan2 */
- device_create_file_sf2_level(new_client, 2, 2); /* Fan2 */
- device_create_file_sf2_level(new_client, 3, 2); /* Fan2 */
- device_create_file_sf2_level(new_client, 1, 3); /* Fan3 */
- device_create_file_sf2_level(new_client, 2, 3); /* Fan3 */
- device_create_file_sf2_level(new_client, 3, 3); /* Fan3 */
+ for (i = 0; i < ARRAY_SIZE(sda_sf2_level); i++)
+ device_create_file(dev, &sda_sf2_level[i].dev_attr);
return 0;
@@ -1366,7 +1306,7 @@
kfree(data->lm75[1]);
}
ERROR2:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
ERROR1:
kfree(data);
ERROR0:
@@ -1434,7 +1374,7 @@
int i, j;
u8 reg_array_tmp[4], pwm_array_tmp[7], reg_tmp;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after
(jiffies - data->last_updated, (unsigned long) (HZ * 3))
@@ -1545,7 +1485,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
#ifdef DEBUG
w83792d_print_debug(data, dev);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index f66c0cf..3f2bac1 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -39,6 +39,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/mutex.h>
/* How many retries on register read error */
#define MAX_RETRIES 5
@@ -107,7 +108,7 @@
struct w83l785ts_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
@@ -221,7 +222,7 @@
/* We can fill in the remaining client fields. */
strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Default values in case the first read fails (unlikely). */
data->temp[1] = data->temp[0] = 0;
@@ -299,7 +300,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct w83l785ts_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
dev_dbg(&client->dev, "Updating w83l785ts data.\n");
@@ -312,7 +313,7 @@
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ff92735..089c6f5 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -168,12 +168,14 @@
help
If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following
- versions of the chipset are supported:
+ versions of the chipset are supported (note that Serverworks is part
+ of Broadcom):
Intel PIIX4
Intel 440MX
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
+ Serverworks HT-1000
SMSC Victory66
This driver can also be built as a module. If so, the module
@@ -389,10 +391,11 @@
also be specified with a module parameter.
config SCx200_ACB
- tristate "NatSemi SCx200 ACCESS.bus"
- depends on I2C && PCI
+ tristate "Geode ACCESS.bus support"
+ depends on X86_32 && I2C && PCI
help
- Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+ Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+ SC1100 processors and the CS5535 and CS5536 Geode companion devices.
If you don't know what to do here, say N.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 3eb4789..d3ef46a 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -63,7 +63,6 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <asm/io.h>
-#include <asm/semaphore.h>
/* ALI1535 SMBus address offsets */
@@ -136,7 +135,6 @@
static struct pci_driver ali1535_driver;
static unsigned short ali1535_smba;
-static DECLARE_MUTEX(i2c_ali1535_sem);
/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
Note the differences between kernels with the old PCI BIOS interface and
@@ -345,7 +343,6 @@
int timeout;
s32 result = 0;
- down(&i2c_ali1535_sem);
/* make sure SMBus is idle */
temp = inb_p(SMBHSTSTS);
for (timeout = 0;
@@ -460,7 +457,6 @@
break;
}
EXIT:
- up(&i2c_ali1535_sem);
return result;
}
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 56c7d98..08e9157 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -38,6 +38,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
extern struct i2c_adapter amd756_smbus;
@@ -45,7 +46,7 @@
static struct i2c_algorithm *s4882_algo;
/* Wrapper access functions for multiplexed SMBus */
-static struct semaphore amd756_lock;
+static DEFINE_MUTEX(amd756_lock);
static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
@@ -59,12 +60,12 @@
|| addr == 0x18)
return -1;
- down(&amd756_lock);
+ mutex_lock(&amd756_lock);
error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
command, size, data);
- up(&amd756_lock);
+ mutex_unlock(&amd756_lock);
return error;
}
@@ -87,7 +88,7 @@
if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
return -1;
- down(&amd756_lock);
+ mutex_lock(&amd756_lock);
if (last_channels != channels) {
union i2c_smbus_data mplxdata;
@@ -105,7 +106,7 @@
command, size, data);
UNLOCK:
- up(&amd756_lock);
+ mutex_unlock(&amd756_lock);
return error;
}
@@ -166,8 +167,6 @@
}
printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n");
- init_MUTEX(&amd756_lock);
-
/* Define the 5 virtual adapters and algorithms structures */
if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
GFP_KERNEL))) {
diff --git a/drivers/i2c/busses/i2c-frodo.c b/drivers/i2c/busses/i2c-frodo.c
deleted file mode 100644
index b6f52f5..0000000
--- a/drivers/i2c/busses/i2c-frodo.c
+++ /dev/null
@@ -1,85 +0,0 @@
-
-/*
- * linux/drivers/i2c/i2c-frodo.c
- *
- * Author: Abraham van der Merwe <abraham@2d3d.co.za>
- *
- * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110
- * Development board (Frodo).
- *
- * This source code is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/hardware.h>
-
-
-static void frodo_setsda (void *data,int state)
-{
- if (state)
- FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT;
- else
- FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT;
-}
-
-static void frodo_setscl (void *data,int state)
-{
- if (state)
- FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT;
- else
- FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT;
-}
-
-static int frodo_getsda (void *data)
-{
- return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0);
-}
-
-static int frodo_getscl (void *data)
-{
- return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0);
-}
-
-static struct i2c_algo_bit_data bit_frodo_data = {
- .setsda = frodo_setsda,
- .setscl = frodo_setscl,
- .getsda = frodo_getsda,
- .getscl = frodo_getscl,
- .udelay = 80,
- .mdelay = 80,
- .timeout = HZ
-};
-
-static struct i2c_adapter frodo_ops = {
- .owner = THIS_MODULE,
- .id = I2C_HW_B_FRODO,
- .algo_data = &bit_frodo_data,
- .dev = {
- .name = "Frodo adapter driver",
- },
-};
-
-static int __init i2c_frodo_init (void)
-{
- return i2c_bit_add_bus(&frodo_ops);
-}
-
-static void __exit i2c_frodo_exit (void)
-{
- i2c_bit_del_bus(&frodo_ops);
-}
-
-MODULE_AUTHOR ("Abraham van der Merwe <abraham@2d3d.co.za>");
-MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
-MODULE_LICENSE ("GPL");
-
-module_init (i2c_frodo_init);
-module_exit (i2c_frodo_exit);
-
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index 4344ae6..c3e1d3e8 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -125,7 +125,7 @@
static int __init i2c_isa_init(void)
{
- init_MUTEX(&isa_adapter.clist_lock);
+ mutex_init(&isa_adapter.clist_lock);
INIT_LIST_HEAD(&isa_adapter.clients);
isa_adapter.nr = ANY_I2C_ISA_BUS;
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
index 5f5d294..d82e6dae 100644
--- a/drivers/i2c/busses/i2c-ite.c
+++ b/drivers/i2c/busses/i2c-ite.c
@@ -200,9 +200,7 @@
.owner = THIS_MODULE,
.id = I2C_HW_I_IIC,
.algo_data = &iic_ite_data,
- .dev = {
- .name = "ITE IIC adapter",
- },
+ .name = "ITE IIC adapter",
};
/* Called when the module is loaded. This function starts the
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index e422d8b..2ed0711 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -126,6 +126,7 @@
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP4XX;
+ drv_data->adapter.class = I2C_CLASS_HWMON;
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data;
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 692f473..d9c7c00 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
/*
Supports:
Intel PIIX4, 440MX
- Serverworks OSB4, CSB5, CSB6
+ Serverworks OSB4, CSB5, CSB6, HT-1000
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
@@ -419,6 +419,8 @@
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
.driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB),
+ .driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
.driver_data = 3 },
{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 7579f4b2..5155010 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -647,7 +647,7 @@
}
/*
- * We are protected by the adapter bus semaphore.
+ * We are protected by the adapter bus mutex.
*/
static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
{
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index d3478e0..8bd305e 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -1,27 +1,26 @@
-/* linux/drivers/i2c/scx200_acb.c
-
+/*
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
National Semiconductor SCx200 ACCESS.bus support
-
+ Also supports the AMD CS5535 and AMD CS5536
+
Based on i2c-keywest.c which is:
Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
-
+
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
-
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
*/
#include <linux/module.h>
@@ -32,7 +31,9 @@
#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include <asm/io.h>
+#include <asm/msr.h>
#include <linux/scx200.h>
@@ -47,16 +48,7 @@
module_param_array(base, int, NULL, 0);
MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
-#ifdef DEBUG
-#define DBG(x...) printk(KERN_DEBUG NAME ": " x)
-#else
-#define DBG(x...)
-#endif
-
-/* The hardware supports interrupt driven mode too, but I haven't
- implemented that. */
-#define POLLED_MODE 1
-#define POLL_TIMEOUT (HZ)
+#define POLL_TIMEOUT (HZ/5)
enum scx200_acb_state {
state_idle,
@@ -79,12 +71,11 @@
};
/* Physical interface */
-struct scx200_acb_iface
-{
+struct scx200_acb_iface {
struct scx200_acb_iface *next;
struct i2c_adapter adapter;
unsigned base;
- struct semaphore sem;
+ struct mutex mutex;
/* State machine data */
enum scx200_acb_state state;
@@ -100,7 +91,7 @@
#define ACBSDA (iface->base + 0)
#define ACBST (iface->base + 1)
#define ACBST_SDAST 0x40 /* SDA Status */
-#define ACBST_BER 0x20
+#define ACBST_BER 0x20
#define ACBST_NEGACK 0x10 /* Negative Acknowledge */
#define ACBST_STASTR 0x08 /* Stall After Start */
#define ACBST_MASTER 0x02
@@ -109,9 +100,9 @@
#define ACBCTL1 (iface->base + 3)
#define ACBCTL1_STASTRE 0x80
#define ACBCTL1_NMINTE 0x40
-#define ACBCTL1_ACK 0x10
-#define ACBCTL1_STOP 0x02
-#define ACBCTL1_START 0x01
+#define ACBCTL1_ACK 0x10
+#define ACBCTL1_STOP 0x02
+#define ACBCTL1_START 0x01
#define ACBADDR (iface->base + 4)
#define ACBCTL2 (iface->base + 5)
#define ACBCTL2_ENABLE 0x01
@@ -122,8 +113,8 @@
{
const char *errmsg;
- DBG("state %s, status = 0x%02x\n",
- scx200_acb_state_name[iface->state], status);
+ dev_dbg(&iface->adapter.dev, "state %s, status = 0x%02x\n",
+ scx200_acb_state_name[iface->state], status);
if (status & ACBST_BER) {
errmsg = "bus error";
@@ -133,8 +124,17 @@
errmsg = "not master";
goto error;
}
- if (status & ACBST_NEGACK)
- goto negack;
+ if (status & ACBST_NEGACK) {
+ dev_dbg(&iface->adapter.dev, "negative ack in state %s\n",
+ scx200_acb_state_name[iface->state]);
+
+ iface->state = state_idle;
+ iface->result = -ENXIO;
+
+ outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
+ outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+ return;
+ }
switch (iface->state) {
case state_idle:
@@ -160,10 +160,10 @@
case state_repeat_start:
outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
/* fallthrough */
-
+
case state_quick:
if (iface->address_byte & 1) {
- if (iface->len == 1)
+ if (iface->len == 1)
outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
else
outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
@@ -202,26 +202,15 @@
outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
break;
}
-
+
outb(*iface->ptr++, ACBSDA);
--iface->len;
-
+
break;
}
return;
- negack:
- DBG("negative acknowledge in state %s\n",
- scx200_acb_state_name[iface->state]);
-
- iface->state = state_idle;
- iface->result = -ENXIO;
-
- outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
- outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
- return;
-
error:
dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg,
scx200_acb_state_name[iface->state]);
@@ -231,20 +220,9 @@
iface->needs_reset = 1;
}
-static void scx200_acb_timeout(struct scx200_acb_iface *iface)
-{
- dev_err(&iface->adapter.dev, "timeout in state %s\n",
- scx200_acb_state_name[iface->state]);
-
- iface->state = state_idle;
- iface->result = -EIO;
- iface->needs_reset = 1;
-}
-
-#ifdef POLLED_MODE
static void scx200_acb_poll(struct scx200_acb_iface *iface)
{
- u8 status = 0;
+ u8 status;
unsigned long timeout;
timeout = jiffies + POLL_TIMEOUT;
@@ -254,17 +232,21 @@
scx200_acb_machine(iface, status);
return;
}
- msleep(10);
+ yield();
}
- scx200_acb_timeout(iface);
+ dev_err(&iface->adapter.dev, "timeout in state %s\n",
+ scx200_acb_state_name[iface->state]);
+
+ iface->state = state_idle;
+ iface->result = -EIO;
+ iface->needs_reset = 1;
}
-#endif /* POLLED_MODE */
static void scx200_acb_reset(struct scx200_acb_iface *iface)
{
/* Disable the ACCESS.bus device and Configure the SCL
- frequency: 16 clock cycles */
+ frequency: 16 clock cycles */
outb(0x70, ACBCTL2);
/* Polling mode */
outb(0, ACBCTL1);
@@ -283,9 +265,9 @@
}
static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
- u16 address, unsigned short flags,
- char rw, u8 command, int size,
- union i2c_smbus_data *data)
+ u16 address, unsigned short flags,
+ char rw, u8 command, int size,
+ union i2c_smbus_data *data)
{
struct scx200_acb_iface *iface = i2c_get_adapdata(adapter);
int len;
@@ -295,53 +277,47 @@
switch (size) {
case I2C_SMBUS_QUICK:
- len = 0;
- buffer = NULL;
- break;
+ len = 0;
+ buffer = NULL;
+ break;
+
case I2C_SMBUS_BYTE:
- if (rw == I2C_SMBUS_READ) {
- len = 1;
- buffer = &data->byte;
- } else {
- len = 1;
- buffer = &command;
- }
- break;
+ len = 1;
+ buffer = rw ? &data->byte : &command;
+ break;
+
case I2C_SMBUS_BYTE_DATA:
- len = 1;
- buffer = &data->byte;
- break;
+ len = 1;
+ buffer = &data->byte;
+ break;
+
case I2C_SMBUS_WORD_DATA:
len = 2;
- cur_word = cpu_to_le16(data->word);
- buffer = (u8 *)&cur_word;
+ cur_word = cpu_to_le16(data->word);
+ buffer = (u8 *)&cur_word;
break;
+
case I2C_SMBUS_BLOCK_DATA:
- len = data->block[0];
- buffer = &data->block[1];
+ len = data->block[0];
+ buffer = &data->block[1];
break;
+
default:
- return -EINVAL;
- }
-
- DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n",
- size, address, command, len, rw == I2C_SMBUS_READ);
-
- if (!len && rw == I2C_SMBUS_READ) {
- dev_warn(&adapter->dev, "zero length read\n");
return -EINVAL;
}
- if (len && !buffer) {
- dev_warn(&adapter->dev, "nonzero length but no buffer\n");
- return -EFAULT;
+ dev_dbg(&adapter->dev,
+ "size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n",
+ size, address, command, len, rw);
+
+ if (!len && rw == I2C_SMBUS_READ) {
+ dev_dbg(&adapter->dev, "zero length read\n");
+ return -EINVAL;
}
- down(&iface->sem);
+ mutex_lock(&iface->mutex);
- iface->address_byte = address<<1;
- if (rw == I2C_SMBUS_READ)
- iface->address_byte |= 1;
+ iface->address_byte = (address << 1) | rw;
iface->command = command;
iface->ptr = buffer;
iface->len = len;
@@ -355,25 +331,21 @@
else
iface->state = state_address;
-#ifdef POLLED_MODE
while (iface->state != state_idle)
scx200_acb_poll(iface);
-#else /* POLLED_MODE */
-#error Interrupt driven mode not implemented
-#endif /* POLLED_MODE */
if (iface->needs_reset)
scx200_acb_reset(iface);
rc = iface->result;
- up(&iface->sem);
+ mutex_unlock(&iface->mutex);
if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ)
- data->word = le16_to_cpu(cur_word);
+ data->word = le16_to_cpu(cur_word);
#ifdef DEBUG
- DBG(": transfer done, result: %d", rc);
+ dev_dbg(&adapter->dev, "transfer done, result: %d", rc);
if (buffer) {
int i;
printk(" data:");
@@ -400,17 +372,18 @@
};
static struct scx200_acb_iface *scx200_acb_list;
+static DECLARE_MUTEX(scx200_acb_list_mutex);
static int scx200_acb_probe(struct scx200_acb_iface *iface)
{
u8 val;
/* Disable the ACCESS.bus device and Configure the SCL
- frequency: 16 clock cycles */
+ frequency: 16 clock cycles */
outb(0x70, ACBCTL2);
if (inb(ACBCTL2) != 0x70) {
- DBG("ACBCTL2 readback failed\n");
+ pr_debug(NAME ": ACBCTL2 readback failed\n");
return -ENXIO;
}
@@ -418,7 +391,8 @@
val = inb(ACBCTL1);
if (val) {
- DBG("disabled, but ACBCTL1=0x%02x\n", val);
+ pr_debug(NAME ": disabled, but ACBCTL1=0x%02x\n",
+ val);
return -ENXIO;
}
@@ -428,18 +402,19 @@
val = inb(ACBCTL1);
if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) {
- DBG("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", val);
+ pr_debug(NAME ": enabled, but NMINTE won't be set, "
+ "ACBCTL1=0x%02x\n", val);
return -ENXIO;
}
return 0;
}
-static int __init scx200_acb_create(int base, int index)
+static int __init scx200_acb_create(const char *text, int base, int index)
{
struct scx200_acb_iface *iface;
struct i2c_adapter *adapter;
- int rc = 0;
+ int rc;
char description[64];
iface = kzalloc(sizeof(*iface), GFP_KERNEL);
@@ -451,50 +426,51 @@
adapter = &iface->adapter;
i2c_set_adapdata(adapter, iface);
- snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
+ snprintf(adapter->name, I2C_NAME_SIZE, "%s ACB%d", text, index);
adapter->owner = THIS_MODULE;
adapter->id = I2C_HW_SMBUS_SCX200;
adapter->algo = &scx200_acb_algorithm;
adapter->class = I2C_CLASS_HWMON;
- init_MUTEX(&iface->sem);
+ mutex_init(&iface->mutex);
- snprintf(description, sizeof(description), "NatSemi SCx200 ACCESS.bus [%s]", adapter->name);
+ snprintf(description, sizeof(description), "%s ACCESS.bus [%s]",
+ text, adapter->name);
+
if (request_region(base, 8, description) == 0) {
- dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n",
+ printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
base, base + 8-1);
rc = -EBUSY;
- goto errout;
+ goto errout_free;
}
iface->base = base;
rc = scx200_acb_probe(iface);
if (rc) {
- dev_warn(&adapter->dev, "probe failed\n");
- goto errout;
+ printk(KERN_WARNING NAME ": probe failed\n");
+ goto errout_release;
}
scx200_acb_reset(iface);
if (i2c_add_adapter(adapter) < 0) {
- dev_err(&adapter->dev, "failed to register\n");
+ printk(KERN_ERR NAME ": failed to register\n");
rc = -ENODEV;
- goto errout;
+ goto errout_release;
}
- lock_kernel();
+ down(&scx200_acb_list_mutex);
iface->next = scx200_acb_list;
scx200_acb_list = iface;
- unlock_kernel();
+ up(&scx200_acb_list_mutex);
return 0;
+ errout_release:
+ release_region(iface->base, 8);
+ errout_free:
+ kfree(iface);
errout:
- if (iface) {
- if (iface->base)
- release_region(iface->base, 8);
- kfree(iface);
- }
return rc;
}
@@ -504,50 +480,69 @@
{ },
};
+static struct pci_device_id divil_pci[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
+ { } /* NULL entry */
+};
+
+#define MSR_LBAR_SMB 0x5140000B
+
+static int scx200_add_cs553x(void)
+{
+ u32 low, hi;
+ u32 smb_base;
+
+ /* Grab & reserve the SMB I/O range */
+ rdmsr(MSR_LBAR_SMB, low, hi);
+
+ /* Check the IO mask and whether SMB is enabled */
+ if (hi != 0x0000F001) {
+ printk(KERN_WARNING NAME ": SMBus not enabled\n");
+ return -ENODEV;
+ }
+
+ /* SMBus IO size is 8 bytes */
+ smb_base = low & 0x0000FFF8;
+
+ return scx200_acb_create("CS5535", smb_base, 0);
+}
+
static int __init scx200_acb_init(void)
{
int i;
- int rc;
+ int rc = -ENODEV;
pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
/* Verify that this really is a SCx200 processor */
- if (pci_dev_present(scx200) == 0)
- return -ENODEV;
+ if (pci_dev_present(scx200)) {
+ for (i = 0; i < MAX_DEVICES; ++i) {
+ if (base[i] > 0)
+ rc = scx200_acb_create("SCx200", base[i], i);
+ }
+ } else if (pci_dev_present(divil_pci))
+ rc = scx200_add_cs553x();
- rc = -ENXIO;
- for (i = 0; i < MAX_DEVICES; ++i) {
- if (base[i] > 0)
- rc = scx200_acb_create(base[i], i);
- }
- if (scx200_acb_list)
- return 0;
return rc;
}
static void __exit scx200_acb_cleanup(void)
{
struct scx200_acb_iface *iface;
- lock_kernel();
+
+ down(&scx200_acb_list_mutex);
while ((iface = scx200_acb_list) != NULL) {
scx200_acb_list = iface->next;
- unlock_kernel();
+ up(&scx200_acb_list_mutex);
i2c_del_adapter(&iface->adapter);
release_region(iface->base, 8);
kfree(iface);
- lock_kernel();
+ down(&scx200_acb_list_mutex);
}
- unlock_kernel();
+ up(&scx200_acb_list_mutex);
}
module_init(scx200_acb_init);
module_exit(scx200_acb_cleanup);
-
-/*
- Local variables:
- compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules"
- c-basic-offset: 8
- End:
-*/
-
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 0710b9d..03d09ed 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/mutex.h>
#define DS1374_REG_TOD0 0x00
#define DS1374_REG_TOD1 0x01
@@ -41,7 +42,7 @@
#define DS1374_DRV_NAME "ds1374"
-static DECLARE_MUTEX(ds1374_mutex);
+static DEFINE_MUTEX(ds1374_mutex);
static struct i2c_driver ds1374_driver;
static struct i2c_client *save_client;
@@ -114,7 +115,7 @@
ulong t1, t2;
int limit = 10; /* arbitrary retry limit */
- down(&ds1374_mutex);
+ mutex_lock(&ds1374_mutex);
/*
* Since the reads are being performed one byte at a time using
@@ -127,7 +128,7 @@
t2 = ds1374_read_rtc();
} while (t1 != t2 && limit--);
- up(&ds1374_mutex);
+ mutex_unlock(&ds1374_mutex);
if (t1 != t2) {
dev_warn(&save_client->dev,
@@ -145,7 +146,7 @@
t1 = *(ulong *) arg;
- down(&ds1374_mutex);
+ mutex_lock(&ds1374_mutex);
/*
* Since the writes are being performed one byte at a time using
@@ -158,7 +159,7 @@
t2 = ds1374_read_rtc();
} while (t1 != t2 && limit--);
- up(&ds1374_mutex);
+ mutex_unlock(&ds1374_mutex);
if (t1 != t2)
dev_warn(&save_client->dev,
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 41116b7..13c1082 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -33,6 +33,7 @@
#include <linux/sched.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
@@ -54,7 +55,7 @@
/* Each client has this additional data */
struct eeprom_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
u8 valid; /* bitfield, bit!=0 if slice is valid */
unsigned long last_updated[8]; /* In jiffies, 8 slices */
u8 data[EEPROM_SIZE]; /* Register values */
@@ -81,7 +82,7 @@
struct eeprom_data *data = i2c_get_clientdata(client);
int i, j;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!(data->valid & (1 << slice)) ||
time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
@@ -107,7 +108,7 @@
data->valid |= (1 << slice);
}
exit:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
@@ -187,7 +188,7 @@
/* Fill in the remaining client fields */
strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
data->nature = UNKNOWN;
/* Tell the I2C layer a new client has arrived */
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 1251c7f..e6f1ab7 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -1635,8 +1635,6 @@
.driver = {
.name = "isp1301_omap",
},
- .id = 1301, /* FIXME "official", i2c-ids.h */
- .class = I2C_CLASS_HWMON,
.attach_adapter = isp1301_scan_bus,
.detach_client = isp1301_detach_client,
};
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 2dc3d48..b5aabe7 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -24,13 +24,14 @@
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/mutex.h>
#include <asm/time.h>
#include <asm/rtc.h>
#define M41T00_DRV_NAME "m41t00"
-static DECLARE_MUTEX(m41t00_mutex);
+static DEFINE_MUTEX(m41t00_mutex);
static struct i2c_driver m41t00_driver;
static struct i2c_client *save_client;
@@ -54,7 +55,7 @@
sec = min = hour = day = mon = year = 0;
sec1 = min1 = hour1 = day1 = mon1 = year1 = 0;
- down(&m41t00_mutex);
+ mutex_lock(&m41t00_mutex);
do {
if (((sec = i2c_smbus_read_byte_data(save_client, 0)) >= 0)
&& ((min = i2c_smbus_read_byte_data(save_client, 1))
@@ -80,7 +81,7 @@
mon1 = mon;
year1 = year;
} while (--limit > 0);
- up(&m41t00_mutex);
+ mutex_unlock(&m41t00_mutex);
if (limit == 0) {
dev_warn(&save_client->dev,
@@ -125,7 +126,7 @@
BIN_TO_BCD(tm.tm_mday);
BIN_TO_BCD(tm.tm_year);
- down(&m41t00_mutex);
+ mutex_lock(&m41t00_mutex);
if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
|| (i2c_smbus_write_byte_data(save_client, 1, tm.tm_min & 0x7f)
< 0)
@@ -140,7 +141,7 @@
dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
- up(&m41t00_mutex);
+ mutex_unlock(&m41t00_mutex);
return;
}
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 6d3ff58..88d2dde 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -31,7 +31,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
static unsigned short normal_i2c[] = {I2C_CLIENT_END};
@@ -54,7 +54,7 @@
/* Each client has this additional data */
struct max6875_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
u32 valid;
u8 data[USER_EEPROM_SIZE];
@@ -83,7 +83,7 @@
if (slice >= USER_EEPROM_SLICES)
return;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
buf = &data->data[slice << SLICE_BITS];
@@ -122,7 +122,7 @@
data->valid |= (1 << slice);
}
exit_up:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off,
@@ -196,7 +196,7 @@
real_client->driver = &max6875_driver;
real_client->flags = 0;
strlcpy(real_client->name, "max6875", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Init fake client data */
/* set the client data to the i2c_client so that it will get freed */
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 36cff09..925a6b3 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
@@ -74,7 +75,7 @@
struct pcf8591_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
u8 control;
u8 aout;
@@ -144,13 +145,13 @@
struct pcf8591_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (val)
data->control |= PCF8591_CONTROL_AOEF;
else
data->control &= ~PCF8591_CONTROL_AOEF;
i2c_smbus_write_byte(client, data->control);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -200,7 +201,7 @@
/* Fill in the remaining client fields and put it into the global
list */
strlcpy(new_client->name, "pcf8591", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
@@ -265,7 +266,7 @@
struct i2c_client *client = to_i2c_client(dev);
struct pcf8591_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ((data->control & PCF8591_CONTROL_AICH_MASK) != channel) {
data->control = (data->control & ~PCF8591_CONTROL_AICH_MASK)
@@ -278,7 +279,7 @@
}
value = i2c_smbus_read_byte(client);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
if ((channel == 2 && input_mode == 2) ||
(channel != 3 && (input_mode == 1 || input_mode == 3)))
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 1af3dfb..179b1e0 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -32,6 +32,7 @@
#include <linux/suspend.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -81,7 +82,7 @@
struct tps65010 {
struct i2c_client client;
- struct semaphore lock;
+ struct mutex lock;
int irq;
struct work_struct work;
struct dentry *file;
@@ -218,7 +219,7 @@
seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
DRIVER_NAME, DRIVER_VERSION, chip);
- down(&tps->lock);
+ mutex_lock(&tps->lock);
/* FIXME how can we tell whether a battery is present?
* likely involves a charge gauging chip (like BQ26501).
@@ -300,7 +301,7 @@
(v2 & (1 << (4 + i))) ? "rising" : "falling");
}
- up(&tps->lock);
+ mutex_unlock(&tps->lock);
return 0;
}
@@ -416,7 +417,7 @@
{
struct tps65010 *tps = _tps;
- down(&tps->lock);
+ mutex_lock(&tps->lock);
tps65010_interrupt(tps);
@@ -444,7 +445,7 @@
if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
enable_irq(tps->irq);
- up(&tps->lock);
+ mutex_unlock(&tps->lock);
}
static irqreturn_t tps65010_irq(int irq, void *_tps, struct pt_regs *regs)
@@ -505,7 +506,7 @@
if (!tps)
return 0;
- init_MUTEX(&tps->lock);
+ mutex_init(&tps->lock);
INIT_WORK(&tps->work, tps65010_work, tps);
tps->irq = -1;
tps->client.addr = address;
@@ -695,7 +696,7 @@
if ((gpio < GPIO1) || (gpio > GPIO4))
return -EINVAL;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
defgpio = i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO);
@@ -720,7 +721,7 @@
gpio, value ? "high" : "low",
i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
EXPORT_SYMBOL(tps65010_set_gpio_out_value);
@@ -745,7 +746,7 @@
led = LED2;
}
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
i2c_smbus_read_byte_data(&the_tps->client,
@@ -771,7 +772,7 @@
default:
printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
DRIVER_NAME);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return -EINVAL;
}
@@ -781,7 +782,7 @@
if (status != 0) {
printk(KERN_ERR "%s: Failed to write led%i_on register\n",
DRIVER_NAME, led);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
@@ -794,7 +795,7 @@
if (status != 0) {
printk(KERN_ERR "%s: Failed to write led%i_per register\n",
DRIVER_NAME, led);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
@@ -802,7 +803,7 @@
i2c_smbus_read_byte_data(&the_tps->client,
TPS_LED1_PER + offs));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
@@ -820,7 +821,7 @@
if (!the_tps)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
vdcdc2 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC2);
vdcdc2 &= ~(1 << 1);
@@ -831,7 +832,7 @@
pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
EXPORT_SYMBOL(tps65010_set_vib);
@@ -848,7 +849,7 @@
if (!the_tps)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
mode ? "enable" : "disable",
@@ -876,7 +877,7 @@
pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
@@ -894,7 +895,7 @@
if (!the_tps)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
@@ -909,7 +910,7 @@
pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
@@ -931,7 +932,7 @@
if (!the_tps || the_tps->por)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
DRIVER_NAME,
@@ -959,7 +960,7 @@
if (status != 0) {
printk(KERN_ERR "%s: Failed to write chconfig register\n",
DRIVER_NAME);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
@@ -977,7 +978,7 @@
pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 1a2c9ab..45e2cdf 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -31,12 +31,13 @@
#include <linux/idr.h>
#include <linux/seq_file.h>
#include <linux/platform_device.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
static LIST_HEAD(adapters);
static LIST_HEAD(drivers);
-static DECLARE_MUTEX(core_lists);
+static DEFINE_MUTEX(core_lists);
static DEFINE_IDR(i2c_adapter_idr);
/* match always succeeds, as we want the probe() to tell if we really accept this match */
@@ -153,7 +154,7 @@
struct list_head *item;
struct i2c_driver *driver;
- down(&core_lists);
+ mutex_lock(&core_lists);
if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) {
res = -ENOMEM;
@@ -168,8 +169,8 @@
}
adap->nr = id & MAX_ID_MASK;
- init_MUTEX(&adap->bus_lock);
- init_MUTEX(&adap->clist_lock);
+ mutex_init(&adap->bus_lock);
+ mutex_init(&adap->clist_lock);
list_add_tail(&adap->list,&adapters);
INIT_LIST_HEAD(&adap->clients);
@@ -203,7 +204,7 @@
}
out_unlock:
- up(&core_lists);
+ mutex_unlock(&core_lists);
return res;
}
@@ -216,7 +217,7 @@
struct i2c_client *client;
int res = 0;
- down(&core_lists);
+ mutex_lock(&core_lists);
/* First make sure that this adapter was ever added */
list_for_each_entry(adap_from_list, &adapters, list) {
@@ -272,7 +273,7 @@
dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
out_unlock:
- up(&core_lists);
+ mutex_unlock(&core_lists);
return res;
}
@@ -287,9 +288,7 @@
{
struct list_head *item;
struct i2c_adapter *adapter;
- int res = 0;
-
- down(&core_lists);
+ int res;
/* add the driver to the list of i2c drivers in the driver core */
driver->driver.owner = owner;
@@ -297,8 +296,10 @@
res = driver_register(&driver->driver);
if (res)
- goto out_unlock;
+ return res;
+ mutex_lock(&core_lists);
+
list_add_tail(&driver->list,&drivers);
pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
@@ -310,9 +311,8 @@
}
}
- out_unlock:
- up(&core_lists);
- return res;
+ mutex_unlock(&core_lists);
+ return 0;
}
EXPORT_SYMBOL(i2c_register_driver);
@@ -324,7 +324,7 @@
int res = 0;
- down(&core_lists);
+ mutex_lock(&core_lists);
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
@@ -363,7 +363,7 @@
pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
out_unlock:
- up(&core_lists);
+ mutex_unlock(&core_lists);
return 0;
}
@@ -384,9 +384,9 @@
{
int rval;
- down(&adapter->clist_lock);
+ mutex_lock(&adapter->clist_lock);
rval = __i2c_check_addr(adapter, addr);
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
return rval;
}
@@ -395,13 +395,13 @@
{
struct i2c_adapter *adapter = client->adapter;
- down(&adapter->clist_lock);
+ mutex_lock(&adapter->clist_lock);
if (__i2c_check_addr(client->adapter, client->addr)) {
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
return -EBUSY;
}
list_add_tail(&client->list,&adapter->clients);
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
if (adapter->client_register) {
if (adapter->client_register(client)) {
@@ -450,12 +450,12 @@
}
}
- down(&adapter->clist_lock);
+ mutex_lock(&adapter->clist_lock);
list_del(&client->list);
init_completion(&client->released);
device_remove_file(&client->dev, &dev_attr_client_name);
device_unregister(&client->dev);
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
wait_for_completion(&client->released);
out:
@@ -513,19 +513,19 @@
struct list_head *item;
struct i2c_client *client;
- down(&adap->clist_lock);
+ mutex_lock(&adap->clist_lock);
list_for_each(item,&adap->clients) {
client = list_entry(item, struct i2c_client, list);
if (!try_module_get(client->driver->driver.owner))
continue;
if (NULL != client->driver->command) {
- up(&adap->clist_lock);
+ mutex_unlock(&adap->clist_lock);
client->driver->command(client,cmd,arg);
- down(&adap->clist_lock);
+ mutex_lock(&adap->clist_lock);
}
module_put(client->driver->driver.owner);
}
- up(&adap->clist_lock);
+ mutex_unlock(&adap->clist_lock);
}
static int __init i2c_init(void)
@@ -569,9 +569,9 @@
}
#endif
- down(&adap->bus_lock);
+ mutex_lock(&adap->bus_lock);
ret = adap->algo->master_xfer(adap,msgs,num);
- up(&adap->bus_lock);
+ mutex_unlock(&adap->bus_lock);
return ret;
} else {
@@ -779,12 +779,12 @@
{
struct i2c_adapter *adapter;
- down(&core_lists);
+ mutex_lock(&core_lists);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
adapter = NULL;
- up(&core_lists);
+ mutex_unlock(&core_lists);
return adapter;
}
@@ -919,12 +919,11 @@
u8 length, u8 *values)
{
union i2c_smbus_data data;
- int i;
+
if (length > I2C_SMBUS_BLOCK_MAX)
length = I2C_SMBUS_BLOCK_MAX;
- for (i = 1; i <= length; i++)
- data.block[i] = values[i-1];
data.block[0] = length;
+ memcpy(&data.block[1], values, length);
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_BLOCK_DATA,&data);
@@ -934,16 +933,14 @@
s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
{
union i2c_smbus_data data;
- int i;
+
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_READ,command,
I2C_SMBUS_I2C_BLOCK_DATA,&data))
return -1;
- else {
- for (i = 1; i <= data.block[0]; i++)
- values[i-1] = data.block[i];
- return data.block[0];
- }
+
+ memcpy(values, &data.block[1], data.block[0]);
+ return data.block[0];
}
s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
@@ -1118,10 +1115,10 @@
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
if (adapter->algo->smbus_xfer) {
- down(&adapter->bus_lock);
+ mutex_lock(&adapter->bus_lock);
res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
command,size,data);
- up(&adapter->bus_lock);
+ mutex_unlock(&adapter->bus_lock);
} else
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command,size,data);
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index 4ce07ae..6e2004c 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -53,7 +53,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(x) (x)->name
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index 4e218f2..6b17247 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -49,7 +49,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index d644779..2bf63e7 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -53,7 +53,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index 909b593..da3be00 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -53,7 +53,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index 7bb85a7..dff0689 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -39,7 +39,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index 8c06592..5e06cc9 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -52,7 +52,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index fd0a4b4..ce5a740 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -55,7 +55,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(x) (x)->name
diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c
index 6c161f2..708fae5 100644
--- a/drivers/media/video/saa711x.c
+++ b/drivers/media/video/saa711x.c
@@ -45,7 +45,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 3ed0edb..e1718e8 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -49,7 +49,6 @@
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(s) (s)->name
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index d0a1e72..4cd5799 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -30,7 +30,6 @@
#include <asm/uaccess.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#define I2C_NAME(x) (x)->name
diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h
index 7eb4004..a90c09d 100644
--- a/include/linux/hwmon-sysfs.h
+++ b/include/linux/hwmon-sysfs.h
@@ -27,11 +27,13 @@
#define to_sensor_dev_attr(_dev_attr) \
container_of(_dev_attr, struct sensor_device_attribute, dev_attr)
-#define SENSOR_DEVICE_ATTR(_name,_mode,_show,_store,_index) \
-struct sensor_device_attribute sensor_dev_attr_##_name = { \
- .dev_attr = __ATTR(_name,_mode,_show,_store), \
- .index = _index, \
-}
+#define SENSOR_ATTR(_name, _mode, _show, _store, _index) \
+ { .dev_attr = __ATTR(_name, _mode, _show, _store), \
+ .index = _index }
+
+#define SENSOR_DEVICE_ATTR(_name, _mode, _show, _store, _index) \
+struct sensor_device_attribute sensor_dev_attr_##_name \
+ = SENSOR_ATTR(_name, _mode, _show, _store, _index)
struct sensor_device_attribute_2 {
struct device_attribute dev_attr;
@@ -41,11 +43,13 @@
#define to_sensor_dev_attr_2(_dev_attr) \
container_of(_dev_attr, struct sensor_device_attribute_2, dev_attr)
+#define SENSOR_ATTR_2(_name, _mode, _show, _store, _nr, _index) \
+ { .dev_attr = __ATTR(_name, _mode, _show, _store), \
+ .index = _index, \
+ .nr = _nr }
+
#define SENSOR_DEVICE_ATTR_2(_name,_mode,_show,_store,_nr,_index) \
-struct sensor_device_attribute_2 sensor_dev_attr_##_name = { \
- .dev_attr = __ATTR(_name,_mode,_show,_store), \
- .index = _index, \
- .nr = _nr, \
-}
+struct sensor_device_attribute_2 sensor_dev_attr_##_name \
+ = SENSOR_ATTR_2(_name, _mode, _show, _store, _nr, _index)
#endif /* _LINUX_HWMON_SYSFS_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 474c8f4..ec311bc 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -172,7 +172,6 @@
#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */
#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */
#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */
-#define I2C_HW_B_FRODO 0x010013 /* 2d3D SA-1110 Development Board */
#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */
#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */
#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 63f1d63..1635ee2 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -32,7 +32,7 @@
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
/* --- For i2c-isa ---------------------------------------------------- */
@@ -225,8 +225,8 @@
int (*client_unregister)(struct i2c_client *);
/* data fields that are valid for all devices */
- struct semaphore bus_lock;
- struct semaphore clist_lock;
+ struct mutex bus_lock;
+ struct mutex clist_lock;
int timeout;
int retries;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 989a9d0..f3dcf89 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1371,6 +1371,7 @@
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
index a173751..6ba8d6f 100644
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ b/sound/oss/dmasound/dmasound_awacs.c
@@ -88,8 +88,6 @@
#include <linux/pmu.h>
#endif
-#include <linux/i2c-dev.h>
-
#include <asm/uaccess.h>
#include <asm/prom.h>
#include <asm/machdep.h>
diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c
index 08cde51..aa09ebd 100644
--- a/sound/ppc/daca.c
+++ b/sound/ppc/daca.c
@@ -22,7 +22,6 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <linux/kmod.h>
#include <linux/slab.h>
#include <sound/core.h>
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 6058c2d..fb05938 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
-#include <linux/i2c-dev.h>
#include <linux/slab.h>
#include <sound/core.h>
#include "pmac.h"
diff --git a/sound/ppc/toonie.c b/sound/ppc/toonie.c
index 053b8f2..210be20 100644
--- a/sound/ppc/toonie.c
+++ b/sound/ppc/toonie.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <linux/kmod.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 838fc11..1146dd8 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -28,7 +28,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/i2c.h>
-#include <linux/i2c-dev.h>
#include <linux/kmod.h>
#include <linux/slab.h>
#include <linux/interrupt.h>