diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index dbd901e..c8d9dcb 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -602,7 +602,6 @@
 		iounmap(intel_private.registers);
 		return -ENOMEM;
 	}
-	intel_private.base.gtt = intel_private.gtt;
 
 	global_cache_flush();   /* FIXME: ? */
 
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 2bf9670..86272f0 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -102,20 +102,6 @@
 }
 EXPORT_SYMBOL(drm_mm_pre_get);
 
-static inline unsigned long drm_mm_hole_node_start(struct drm_mm_node *hole_node)
-{
-	return hole_node->start + hole_node->size;
-}
-
-static inline unsigned long drm_mm_hole_node_end(struct drm_mm_node *hole_node)
-{
-	struct drm_mm_node *next_node =
-		list_entry(hole_node->node_list.next, struct drm_mm_node,
-			   node_list);
-
-	return next_node->start;
-}
-
 static void drm_mm_insert_helper(struct drm_mm_node *hole_node,
 				 struct drm_mm_node *node,
 				 unsigned long size, unsigned alignment,
@@ -127,7 +113,7 @@
 	unsigned long adj_start = hole_start;
 	unsigned long adj_end = hole_end;
 
-	BUG_ON(!hole_node->hole_follows || node->allocated);
+	BUG_ON(node->allocated);
 
 	if (mm->color_adjust)
 		mm->color_adjust(hole_node, color, &adj_start, &adj_end);
@@ -155,12 +141,57 @@
 	BUG_ON(node->start + node->size > adj_end);
 
 	node->hole_follows = 0;
-	if (node->start + node->size < hole_end) {
+	if (__drm_mm_hole_node_start(node) < hole_end) {
 		list_add(&node->hole_stack, &mm->hole_stack);
 		node->hole_follows = 1;
 	}
 }
 
+struct drm_mm_node *drm_mm_create_block(struct drm_mm *mm,
+					unsigned long start,
+					unsigned long size,
+					bool atomic)
+{
+	struct drm_mm_node *hole, *node;
+	unsigned long end = start + size;
+	unsigned long hole_start;
+	unsigned long hole_end;
+
+	drm_mm_for_each_hole(hole, mm, hole_start, hole_end) {
+		if (hole_start > start || hole_end < end)
+			continue;
+
+		node = drm_mm_kmalloc(mm, atomic);
+		if (unlikely(node == NULL))
+			return NULL;
+
+		node->start = start;
+		node->size = size;
+		node->mm = mm;
+		node->allocated = 1;
+
+		INIT_LIST_HEAD(&node->hole_stack);
+		list_add(&node->node_list, &hole->node_list);
+
+		if (start == hole_start) {
+			hole->hole_follows = 0;
+			list_del_init(&hole->hole_stack);
+		}
+
+		node->hole_follows = 0;
+		if (end != hole_end) {
+			list_add(&node->hole_stack, &mm->hole_stack);
+			node->hole_follows = 1;
+		}
+
+		return node;
+	}
+
+	WARN(1, "no hole found for block 0x%lx + 0x%lx\n", start, size);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_mm_create_block);
+
 struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *hole_node,
 					     unsigned long size,
 					     unsigned alignment,
@@ -251,7 +282,7 @@
 	BUG_ON(node->start + node->size > end);
 
 	node->hole_follows = 0;
-	if (node->start + node->size < hole_end) {
+	if (__drm_mm_hole_node_start(node) < hole_end) {
 		list_add(&node->hole_stack, &mm->hole_stack);
 		node->hole_follows = 1;
 	}
@@ -325,12 +356,13 @@
 	    list_entry(node->node_list.prev, struct drm_mm_node, node_list);
 
 	if (node->hole_follows) {
-		BUG_ON(drm_mm_hole_node_start(node)
-				== drm_mm_hole_node_end(node));
+		BUG_ON(__drm_mm_hole_node_start(node) ==
+		       __drm_mm_hole_node_end(node));
 		list_del(&node->hole_stack);
 	} else
-		BUG_ON(drm_mm_hole_node_start(node)
-				!= drm_mm_hole_node_end(node));
+		BUG_ON(__drm_mm_hole_node_start(node) !=
+		       __drm_mm_hole_node_end(node));
+
 
 	if (!prev_node->hole_follows) {
 		prev_node->hole_follows = 1;
@@ -388,6 +420,8 @@
 {
 	struct drm_mm_node *entry;
 	struct drm_mm_node *best;
+	unsigned long adj_start;
+	unsigned long adj_end;
 	unsigned long best_size;
 
 	BUG_ON(mm->scanned_blocks);
@@ -395,17 +429,13 @@
 	best = NULL;
 	best_size = ~0UL;
 
-	list_for_each_entry(entry, &mm->hole_stack, hole_stack) {
-		unsigned long adj_start = drm_mm_hole_node_start(entry);
-		unsigned long adj_end = drm_mm_hole_node_end(entry);
-
+	drm_mm_for_each_hole(entry, mm, adj_start, adj_end) {
 		if (mm->color_adjust) {
 			mm->color_adjust(entry, color, &adj_start, &adj_end);
 			if (adj_end <= adj_start)
 				continue;
 		}
 
-		BUG_ON(!entry->hole_follows);
 		if (!check_free_hole(adj_start, adj_end, size, alignment))
 			continue;
 
@@ -432,6 +462,8 @@
 {
 	struct drm_mm_node *entry;
 	struct drm_mm_node *best;
+	unsigned long adj_start;
+	unsigned long adj_end;
 	unsigned long best_size;
 
 	BUG_ON(mm->scanned_blocks);
@@ -439,13 +471,11 @@
 	best = NULL;
 	best_size = ~0UL;
 
-	list_for_each_entry(entry, &mm->hole_stack, hole_stack) {
-		unsigned long adj_start = drm_mm_hole_node_start(entry) < start ?
-			start : drm_mm_hole_node_start(entry);
-		unsigned long adj_end = drm_mm_hole_node_end(entry) > end ?
-			end : drm_mm_hole_node_end(entry);
-
-		BUG_ON(!entry->hole_follows);
+	drm_mm_for_each_hole(entry, mm, adj_start, adj_end) {
+		if (adj_start < start)
+			adj_start = start;
+		if (adj_end > end)
+			adj_end = end;
 
 		if (mm->color_adjust) {
 			mm->color_adjust(entry, color, &adj_start, &adj_end);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index e6a11ca8..f7d88e9 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -102,7 +102,7 @@
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-	seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d %d%s%s%s",
+	seq_printf(m, "%p: %s%s %8zdKiB %02x %02x %d %d %d%s%s%s",
 		   &obj->base,
 		   get_pin_flag(obj),
 		   get_tiling_flag(obj),
@@ -124,6 +124,8 @@
 	if (obj->gtt_space != NULL)
 		seq_printf(m, " (gtt offset: %08x, size: %08x)",
 			   obj->gtt_offset, (unsigned int)obj->gtt_space->size);
+	if (obj->stolen)
+		seq_printf(m, " (stolen: %08lx)", obj->stolen->start);
 	if (obj->pin_mappable || obj->fault_mappable) {
 		char s[3], *t = s;
 		if (obj->pin_mappable)
@@ -387,7 +389,7 @@
 				 struct intel_ring_buffer *ring)
 {
 	if (ring->get_seqno) {
-		seq_printf(m, "Current sequence (%s): %d\n",
+		seq_printf(m, "Current sequence (%s): %u\n",
 			   ring->name, ring->get_seqno(ring, false));
 	}
 }
@@ -544,11 +546,11 @@
 	struct drm_device *dev = node->minor->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
-	const volatile u32 __iomem *hws;
+	const u32 *hws;
 	int i;
 
 	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
-	hws = (volatile u32 __iomem *)ring->status_page.page_addr;
+	hws = ring->status_page.page_addr;
 	if (hws == NULL)
 		return 0;
 
@@ -608,7 +610,7 @@
 	seq_printf(m, "%s [%d]:\n", name, count);
 
 	while (count--) {
-		seq_printf(m, "  %08x %8u %04x %04x %x %x%s%s%s%s%s%s%s",
+		seq_printf(m, "  %08x %8u %02x %02x %x %x%s%s%s%s%s%s%s",
 			   err->gtt_offset,
 			   err->size,
 			   err->read_domains,
@@ -841,6 +843,77 @@
 	.release = i915_error_state_release,
 };
 
+static ssize_t
+i915_next_seqno_read(struct file *filp,
+		 char __user *ubuf,
+		 size_t max,
+		 loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	char buf[80];
+	int len;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	len = snprintf(buf, sizeof(buf),
+		       "next_seqno :  0x%x\n",
+		       dev_priv->next_seqno);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	if (len > sizeof(buf))
+		len = sizeof(buf);
+
+	return simple_read_from_buffer(ubuf, max, ppos, buf, len);
+}
+
+static ssize_t
+i915_next_seqno_write(struct file *filp,
+		      const char __user *ubuf,
+		      size_t cnt,
+		      loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	char buf[20];
+	u32 val = 1;
+	int ret;
+
+	if (cnt > 0) {
+		if (cnt > sizeof(buf) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buf, ubuf, cnt))
+			return -EFAULT;
+		buf[cnt] = 0;
+
+		ret = kstrtouint(buf, 0, &val);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	ret = i915_gem_set_seqno(dev, val);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret ?: cnt;
+}
+
+static const struct file_operations i915_next_seqno_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = i915_next_seqno_read,
+	.write = i915_next_seqno_write,
+	.llseek = default_llseek,
+};
+
 static int i915_rstdby_delays(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
@@ -1551,7 +1624,7 @@
 		return 0;
 	}
 
-	ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+	ret = mutex_lock_interruptible(&dev_priv->dpio_lock);
 	if (ret)
 		return ret;
 
@@ -1580,7 +1653,7 @@
 	seq_printf(m, "DPIO_FASTCLK_DISABLE: 0x%08x\n",
 		   intel_dpio_read(dev_priv, DPIO_FASTCLK_DISABLE));
 
-	mutex_unlock(&dev->mode_config.mutex);
+	mutex_unlock(&dev_priv->dpio_lock);
 
 	return 0;
 }
@@ -2105,6 +2178,12 @@
 	if (ret)
 		return ret;
 
+	ret = i915_debugfs_create(minor->debugfs_root, minor,
+				 "i915_next_seqno",
+				 &i915_next_seqno_fops);
+	if (ret)
+		return ret;
+
 	return drm_debugfs_create_files(i915_debugfs_list,
 					I915_DEBUGFS_ENTRIES,
 					minor->debugfs_root, minor);
@@ -2128,6 +2207,8 @@
 				 1, minor);
 	drm_debugfs_remove_files((struct drm_info_list *) &i915_error_state_fops,
 				 1, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_next_seqno_fops,
+				 1, minor);
 }
 
 #endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 99daa89..6d8a1dc 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1297,19 +1297,21 @@
 	if (ret)
 		goto cleanup_vga_switcheroo;
 
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto cleanup_gem_stolen;
+
+	/* Important: The output setup functions called by modeset_init need
+	 * working irqs for e.g. gmbus and dp aux transfers. */
 	intel_modeset_init(dev);
 
 	ret = i915_gem_init(dev);
 	if (ret)
-		goto cleanup_gem_stolen;
-
-	intel_modeset_gem_init(dev);
+		goto cleanup_irq;
 
 	INIT_WORK(&dev_priv->console_resume_work, intel_console_resume);
 
-	ret = drm_irq_install(dev);
-	if (ret)
-		goto cleanup_gem;
+	intel_modeset_gem_init(dev);
 
 	/* Always safe in the mode setting case. */
 	/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1317,7 +1319,25 @@
 
 	ret = intel_fbdev_init(dev);
 	if (ret)
-		goto cleanup_irq;
+		goto cleanup_gem;
+
+	/* Only enable hotplug handling once the fbdev is fully set up. */
+	intel_hpd_init(dev);
+
+	/*
+	 * Some ports require correctly set-up hpd registers for detection to
+	 * work properly (leading to ghost connected connector status), e.g. VGA
+	 * on gm45.  Hence we can only set up the initial fbdev config after hpd
+	 * irqs are fully enabled. Now we should scan for the initial config
+	 * only once hotplug handling is enabled, but due to screwed-up locking
+	 * around kms/fbdev init we can't protect the fdbev initial config
+	 * scanning against hotplug events. Hence do this first and ignore the
+	 * tiny window where we will loose hotplug notifactions.
+	 */
+	intel_fbdev_initial_config(dev);
+
+	/* Only enable hotplug handling once the fbdev is fully set up. */
+	dev_priv->enable_hotplug_processing = true;
 
 	drm_kms_helper_poll_init(dev);
 
@@ -1326,13 +1346,13 @@
 
 	return 0;
 
-cleanup_irq:
-	drm_irq_uninstall(dev);
 cleanup_gem:
 	mutex_lock(&dev->struct_mutex);
 	i915_gem_cleanup_ringbuffer(dev);
 	mutex_unlock(&dev->struct_mutex);
 	i915_gem_cleanup_aliasing_ppgtt(dev);
+cleanup_irq:
+	drm_irq_uninstall(dev);
 cleanup_gem_stolen:
 	i915_gem_cleanup_stolen(dev);
 cleanup_vga_switcheroo:
@@ -1582,7 +1602,7 @@
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
 	spin_lock_init(&dev_priv->rps.lock);
-	spin_lock_init(&dev_priv->dpio_lock);
+	mutex_init(&dev_priv->dpio_lock);
 
 	mutex_init(&dev_priv->rps.hw_lock);
 
@@ -1614,9 +1634,6 @@
 	intel_opregion_init(dev);
 	acpi_video_register();
 
-	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
-		    (unsigned long) dev);
-
 	if (IS_GEN5(dev))
 		intel_gpu_ips_init(dev_priv);
 
@@ -1723,9 +1740,6 @@
 		mutex_unlock(&dev->struct_mutex);
 		i915_gem_cleanup_aliasing_ppgtt(dev);
 		i915_gem_cleanup_stolen(dev);
-		drm_mm_takedown(&dev_priv->mm.stolen);
-
-		intel_cleanup_overlay(dev);
 
 		if (!I915_NEED_GFX_HWS(dev))
 			i915_free_hws(dev);
@@ -1738,6 +1752,10 @@
 	intel_teardown_mchbar(dev);
 
 	destroy_workqueue(dev_priv->wq);
+	pm_qos_remove_request(&dev_priv->pm_qos);
+
+	if (dev_priv->slab)
+		kmem_cache_destroy(dev_priv->slab);
 
 	pci_dev_put(dev_priv->bridge_dev);
 	kfree(dev->dev_private);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 1172658..c8cbc32 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -565,6 +565,7 @@
 		intel_modeset_init_hw(dev);
 		intel_modeset_setup_hw_state(dev, false);
 		drm_irq_install(dev);
+		intel_hpd_init(dev);
 	}
 
 	intel_opregion_init(dev);
@@ -870,6 +871,7 @@
 
 		drm_irq_uninstall(dev);
 		drm_irq_install(dev);
+		intel_hpd_init(dev);
 	} else {
 		mutex_unlock(&dev->struct_mutex);
 	}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ed30595..b1b1b73 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -30,6 +30,8 @@
 #ifndef _I915_DRV_H_
 #define _I915_DRV_H_
 
+#include <uapi/drm/i915_drm.h>
+
 #include "i915_reg.h"
 #include "intel_bios.h"
 #include "intel_ringbuffer.h"
@@ -40,6 +42,7 @@
 #include <linux/backlight.h>
 #include <linux/intel-iommu.h>
 #include <linux/kref.h>
+#include <linux/pm_qos.h>
 
 /* General customization:
  */
@@ -83,7 +86,12 @@
 };
 #define port_name(p) ((p) + 'A')
 
-#define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+#define I915_GEM_GPU_DOMAINS \
+	(I915_GEM_DOMAIN_RENDER | \
+	 I915_GEM_DOMAIN_SAMPLER | \
+	 I915_GEM_DOMAIN_COMMAND | \
+	 I915_GEM_DOMAIN_INSTRUCTION | \
+	 I915_GEM_DOMAIN_VERTEX)
 
 #define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++)
 
@@ -101,6 +109,19 @@
 };
 #define I915_NUM_PLLS 2
 
+/* Used by dp and fdi links */
+struct intel_link_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+void intel_link_compute_m_n(int bpp, int nlanes,
+			    int pixel_clock, int link_clock,
+			    struct intel_link_m_n *m_n);
+
 struct intel_ddi_plls {
 	int spll_refcount;
 	int wrpll1_refcount;
@@ -276,6 +297,7 @@
 			  struct drm_i915_gem_object *obj);
 	int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 			    int x, int y);
+	void (*hpd_irq_setup)(struct drm_device *dev);
 	/* clock updates for mode set */
 	/* cursor updates */
 	/* render clock increase/decrease */
@@ -577,6 +599,9 @@
 	struct mutex hw_lock;
 };
 
+/* defined intel_pm.c */
+extern spinlock_t mchdev_lock;
+
 struct intel_ilk_power_mgmt {
 	u8 cur_delay;
 	u8 min_delay;
@@ -619,6 +644,7 @@
 
 typedef struct drm_i915_private {
 	struct drm_device *dev;
+	struct kmem_cache *slab;
 
 	const struct intel_device_info *info;
 
@@ -633,10 +659,11 @@
 	/** forcewake_count is protected by gt_lock */
 	unsigned forcewake_count;
 	/** gt_lock is also taken in irq contexts. */
-	struct spinlock gt_lock;
+	spinlock_t gt_lock;
 
 	struct intel_gmbus gmbus[GMBUS_NUM_PORTS];
 
+
 	/** gmbus_mutex protects against concurrent usage of the single hw gmbus
 	 * controller on different i2c buses. */
 	struct mutex gmbus_mutex;
@@ -646,9 +673,11 @@
 	 */
 	uint32_t gpio_mmio_base;
 
+	wait_queue_head_t gmbus_wait_queue;
+
 	struct pci_dev *bridge_dev;
 	struct intel_ring_buffer ring[I915_NUM_RINGS];
-	uint32_t next_seqno;
+	uint32_t last_seqno, next_seqno;
 
 	drm_dma_handle_t *status_page_dmah;
 	struct resource mch_res;
@@ -658,8 +687,11 @@
 	/* protects the irq masks */
 	spinlock_t irq_lock;
 
+	/* To control wakeup latency, e.g. for irq-driven dp aux transfers. */
+	struct pm_qos_request pm_qos;
+
 	/* DPIO indirect register protection */
-	spinlock_t dpio_lock;
+	struct mutex dpio_lock;
 
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 pipestat[2];
@@ -669,6 +701,7 @@
 
 	u32 hotplug_supported_mask;
 	struct work_struct hotplug_work;
+	bool enable_hotplug_processing;
 
 	int num_pipe;
 	int num_pch_pll;
@@ -710,7 +743,6 @@
 	unsigned int display_clock_mode:1;
 	int lvds_ssc_freq;
 	unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
-	unsigned int lvds_val; /* used for checking LVDS channel mode */
 	struct {
 		int rate;
 		int lanes;
@@ -771,6 +803,10 @@
 		unsigned long gtt_start;
 		unsigned long gtt_mappable_end;
 		unsigned long gtt_end;
+		unsigned long stolen_base; /* limited to low memory (32-bit) */
+
+		/** "Graphics Stolen Memory" holds the global PTEs */
+		void __iomem *gsm;
 
 		struct io_mapping *gtt_mapping;
 		phys_addr_t gtt_base_addr;
@@ -943,6 +979,8 @@
 	I915_CACHE_LLC_MLC, /* gen6+, in docs at least! */
 };
 
+#define I915_GTT_RESERVED ((struct drm_mm_node *)0x1)
+
 struct drm_i915_gem_object_ops {
 	/* Interface between the GEM object and its backing storage.
 	 * get_pages() is called once prior to the use of the associated set
@@ -968,6 +1006,8 @@
 
 	/** Current space allocated to this object in the GTT, if any. */
 	struct drm_mm_node *gtt_space;
+	/** Stolen memory for this object, instead of being backed by shmem. */
+	struct drm_mm_node *stolen;
 	struct list_head gtt_list;
 
 	/** This object's place on the active/inactive lists */
@@ -1138,7 +1178,7 @@
 
 struct drm_i915_file_private {
 	struct {
-		struct spinlock lock;
+		spinlock_t lock;
 		struct list_head request_list;
 	} mm;
 	struct idr context_idr;
@@ -1224,6 +1264,8 @@
 
 #define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5)
 
+#define HAS_DDI(dev)		(IS_HASWELL(dev))
+
 #define INTEL_PCH_DEVICE_ID_MASK		0xff00
 #define INTEL_PCH_IBX_DEVICE_ID_TYPE		0x3b00
 #define INTEL_PCH_CPT_DEVICE_ID_TYPE		0x1c00
@@ -1320,6 +1362,7 @@
 void i915_handle_error(struct drm_device *dev, bool wedged);
 
 extern void intel_irq_init(struct drm_device *dev);
+extern void intel_hpd_init(struct drm_device *dev);
 extern void intel_gt_init(struct drm_device *dev);
 extern void intel_gt_reset(struct drm_device *dev);
 
@@ -1388,12 +1431,15 @@
 int i915_gem_wait_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file_priv);
 void i915_gem_load(struct drm_device *dev);
+void *i915_gem_object_alloc(struct drm_device *dev);
+void i915_gem_object_free(struct drm_i915_gem_object *obj);
 int i915_gem_init_object(struct drm_gem_object *obj);
 void i915_gem_object_init(struct drm_i915_gem_object *obj,
 			 const struct drm_i915_gem_object_ops *ops);
 struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 						  size_t size);
 void i915_gem_free_object(struct drm_gem_object *obj);
+
 int __must_check i915_gem_object_pin(struct drm_i915_gem_object *obj,
 				     uint32_t alignment,
 				     bool map_and_fenceable,
@@ -1451,8 +1497,8 @@
 	return (int32_t)(seq1 - seq2) >= 0;
 }
 
-extern int i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
-
+int __must_check i915_gem_get_seqno(struct drm_device *dev, u32 *seqno);
+int __must_check i915_gem_set_seqno(struct drm_device *dev, u32 seqno);
 int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
 int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
 
@@ -1559,10 +1605,9 @@
 				enum i915_cache_level cache_level);
 void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
 void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj);
-void i915_gem_init_global_gtt(struct drm_device *dev,
-			      unsigned long start,
-			      unsigned long mappable_end,
-			      unsigned long end);
+void i915_gem_init_global_gtt(struct drm_device *dev);
+void i915_gem_setup_global_gtt(struct drm_device *dev, unsigned long start,
+			       unsigned long mappable_end, unsigned long end);
 int i915_gem_gtt_init(struct drm_device *dev);
 void i915_gem_gtt_fini(struct drm_device *dev);
 static inline void i915_gem_chipset_flush(struct drm_device *dev)
@@ -1582,9 +1627,22 @@
 
 /* i915_gem_stolen.c */
 int i915_gem_init_stolen(struct drm_device *dev);
+int i915_gem_stolen_setup_compression(struct drm_device *dev, int size);
+void i915_gem_stolen_cleanup_compression(struct drm_device *dev);
 void i915_gem_cleanup_stolen(struct drm_device *dev);
+struct drm_i915_gem_object *
+i915_gem_object_create_stolen(struct drm_device *dev, u32 size);
+void i915_gem_object_release_stolen(struct drm_i915_gem_object *obj);
 
 /* i915_gem_tiling.c */
+inline static bool i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
+{
+	drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
+
+	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+		obj->tiling_mode != I915_TILING_NONE;
+}
+
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
 void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj);
 void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index da3c82e3..e6cc020 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -163,8 +163,8 @@
 		return -ENODEV;
 
 	mutex_lock(&dev->struct_mutex);
-	i915_gem_init_global_gtt(dev, args->gtt_start,
-				 args->gtt_end, args->gtt_end);
+	i915_gem_setup_global_gtt(dev, args->gtt_start, args->gtt_end,
+				  args->gtt_end);
 	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
@@ -192,6 +192,18 @@
 	return 0;
 }
 
+void *i915_gem_object_alloc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return kmem_cache_alloc(dev_priv->slab, GFP_KERNEL | __GFP_ZERO);
+}
+
+void i915_gem_object_free(struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+	kmem_cache_free(dev_priv->slab, obj);
+}
+
 static int
 i915_gem_create(struct drm_file *file,
 		struct drm_device *dev,
@@ -215,7 +227,7 @@
 	if (ret) {
 		drm_gem_object_release(&obj->base);
 		i915_gem_info_remove_obj(dev->dev_private, obj->base.size);
-		kfree(obj);
+		i915_gem_object_free(obj);
 		return ret;
 	}
 
@@ -259,14 +271,6 @@
 			       args->size, &args->handle);
 }
 
-static int i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
-{
-	drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
-
-	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
-		obj->tiling_mode != I915_TILING_NONE;
-}
-
 static inline int
 __copy_to_user_swizzled(char __user *cpu_vaddr,
 			const char *gpu_vaddr, int gpu_offset,
@@ -407,7 +411,6 @@
 	loff_t offset;
 	int shmem_page_offset, page_length, ret = 0;
 	int obj_do_bit17_swizzling, page_do_bit17_swizzling;
-	int hit_slowpath = 0;
 	int prefaulted = 0;
 	int needs_clflush = 0;
 	struct scatterlist *sg;
@@ -469,7 +472,6 @@
 		if (ret == 0)
 			goto next_page;
 
-		hit_slowpath = 1;
 		mutex_unlock(&dev->struct_mutex);
 
 		if (!prefaulted) {
@@ -502,12 +504,6 @@
 out:
 	i915_gem_object_unpin_pages(obj);
 
-	if (hit_slowpath) {
-		/* Fixup: Kill any reinstated backing storage pages */
-		if (obj->madv == __I915_MADV_PURGED)
-			i915_gem_object_truncate(obj);
-	}
-
 	return ret;
 }
 
@@ -838,12 +834,13 @@
 	i915_gem_object_unpin_pages(obj);
 
 	if (hit_slowpath) {
-		/* Fixup: Kill any reinstated backing storage pages */
-		if (obj->madv == __I915_MADV_PURGED)
-			i915_gem_object_truncate(obj);
-		/* and flush dirty cachelines in case the object isn't in the cpu write
-		 * domain anymore. */
-		if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
+		/*
+		 * Fixup: Flush cpu caches in case we didn't flush the dirty
+		 * cachelines in-line while writing and the object moved
+		 * out of the cpu write domain while we've dropped the lock.
+		 */
+		if (!needs_clflush_after &&
+		    obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
 			i915_gem_clflush_object(obj);
 			i915_gem_chipset_flush(dev);
 		}
@@ -1344,6 +1341,12 @@
 
 	trace_i915_gem_object_fault(obj, page_offset, true, write);
 
+	/* Access to snoopable pages through the GTT is incoherent. */
+	if (obj->cache_level != I915_CACHE_NONE && !HAS_LLC(dev)) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
 	/* Now bind it into the GTT if needed */
 	ret = i915_gem_object_pin(obj, 0, true, false);
 	if (ret)
@@ -1933,30 +1936,24 @@
 }
 
 static int
-i915_gem_handle_seqno_wrap(struct drm_device *dev)
+i915_gem_init_seqno(struct drm_device *dev, u32 seqno)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *ring;
 	int ret, i, j;
 
-	/* The hardware uses various monotonic 32-bit counters, if we
-	 * detect that they will wraparound we need to idle the GPU
-	 * and reset those counters.
-	 */
-	ret = 0;
+	/* Carefully retire all requests without writing to the rings */
 	for_each_ring(ring, dev_priv, i) {
-		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
-			ret |= ring->sync_seqno[j] != 0;
+		ret = intel_ring_idle(ring);
+		if (ret)
+			return ret;
 	}
-	if (ret == 0)
-		return ret;
-
-	ret = i915_gpu_idle(dev);
-	if (ret)
-		return ret;
-
 	i915_gem_retire_requests(dev);
+
+	/* Finally reset hw state */
 	for_each_ring(ring, dev_priv, i) {
+		intel_ring_init_seqno(ring, seqno);
+
 		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
 			ring->sync_seqno[j] = 0;
 	}
@@ -1964,6 +1961,32 @@
 	return 0;
 }
 
+int i915_gem_set_seqno(struct drm_device *dev, u32 seqno)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (seqno == 0)
+		return -EINVAL;
+
+	/* HWS page needs to be set less than what we
+	 * will inject to ring
+	 */
+	ret = i915_gem_init_seqno(dev, seqno - 1);
+	if (ret)
+		return ret;
+
+	/* Carefully set the last_seqno value so that wrap
+	 * detection still works
+	 */
+	dev_priv->next_seqno = seqno;
+	dev_priv->last_seqno = seqno - 1;
+	if (dev_priv->last_seqno == 0)
+		dev_priv->last_seqno--;
+
+	return 0;
+}
+
 int
 i915_gem_get_seqno(struct drm_device *dev, u32 *seqno)
 {
@@ -1971,14 +1994,14 @@
 
 	/* reserve 0 for non-seqno */
 	if (dev_priv->next_seqno == 0) {
-		int ret = i915_gem_handle_seqno_wrap(dev);
+		int ret = i915_gem_init_seqno(dev, 0);
 		if (ret)
 			return ret;
 
 		dev_priv->next_seqno = 1;
 	}
 
-	*seqno = dev_priv->next_seqno++;
+	*seqno = dev_priv->last_seqno = dev_priv->next_seqno++;
 	return 0;
 }
 
@@ -2648,7 +2671,7 @@
 	case 4: i965_write_fence_reg(dev, reg, obj); break;
 	case 3: i915_write_fence_reg(dev, reg, obj); break;
 	case 2: i830_write_fence_reg(dev, reg, obj); break;
-	default: break;
+	default: BUG();
 	}
 }
 
@@ -2823,7 +2846,7 @@
 
 	/* On non-LLC machines we have to be careful when putting differing
 	 * types of snoopable memory together to avoid the prefetcher
-	 * crossing memory domains and dieing.
+	 * crossing memory domains and dying.
 	 */
 	if (HAS_LLC(dev))
 		return true;
@@ -3698,14 +3721,14 @@
 {
 	struct drm_i915_gem_object *obj;
 	struct address_space *mapping;
-	u32 mask;
+	gfp_t mask;
 
-	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	obj = i915_gem_object_alloc(dev);
 	if (obj == NULL)
 		return NULL;
 
 	if (drm_gem_object_init(dev, &obj->base, size) != 0) {
-		kfree(obj);
+		i915_gem_object_free(obj);
 		return NULL;
 	}
 
@@ -3777,6 +3800,7 @@
 	obj->pages_pin_count = 0;
 	i915_gem_object_put_pages(obj);
 	i915_gem_object_free_mmap_offset(obj);
+	i915_gem_object_release_stolen(obj);
 
 	BUG_ON(obj->pages);
 
@@ -3787,7 +3811,7 @@
 	i915_gem_info_remove_obj(dev_priv, obj->base.size);
 
 	kfree(obj->bit_17);
-	kfree(obj);
+	i915_gem_object_free(obj);
 }
 
 int
@@ -3883,8 +3907,10 @@
 	I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL);
 	if (IS_GEN6(dev))
 		I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB));
-	else
+	else if (IS_GEN7(dev))
 		I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB));
+	else
+		BUG();
 }
 
 static bool
@@ -3919,6 +3945,8 @@
 
 	i915_gem_init_swizzling(dev);
 
+	dev_priv->next_seqno = dev_priv->last_seqno = (u32)~0 - 0x1000;
+
 	ret = intel_init_render_ring_buffer(dev);
 	if (ret)
 		return ret;
@@ -3935,8 +3963,6 @@
 			goto cleanup_bsd_ring;
 	}
 
-	dev_priv->next_seqno = 1;
-
 	/*
 	 * XXX: There was some w/a described somewhere suggesting loading
 	 * contexts before PPGTT.
@@ -3953,58 +3979,13 @@
 	return ret;
 }
 
-static bool
-intel_enable_ppgtt(struct drm_device *dev)
-{
-	if (i915_enable_ppgtt >= 0)
-		return i915_enable_ppgtt;
-
-#ifdef CONFIG_INTEL_IOMMU
-	/* Disable ppgtt on SNB if VT-d is on. */
-	if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
-		return false;
-#endif
-
-	return true;
-}
-
 int i915_gem_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long gtt_size, mappable_size;
 	int ret;
 
-	gtt_size = dev_priv->mm.gtt->gtt_total_entries << PAGE_SHIFT;
-	mappable_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
-
 	mutex_lock(&dev->struct_mutex);
-	if (intel_enable_ppgtt(dev) && HAS_ALIASING_PPGTT(dev)) {
-		/* PPGTT pdes are stolen from global gtt ptes, so shrink the
-		 * aperture accordingly when using aliasing ppgtt. */
-		gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
-
-		i915_gem_init_global_gtt(dev, 0, mappable_size, gtt_size);
-
-		ret = i915_gem_init_aliasing_ppgtt(dev);
-		if (ret) {
-			mutex_unlock(&dev->struct_mutex);
-			return ret;
-		}
-	} else {
-		/* Let GEM Manage all of the aperture.
-		 *
-		 * However, leave one page at the end still bound to the scratch
-		 * page.  There are a number of places where the hardware
-		 * apparently prefetches past the end of the object, and we've
-		 * seen multiple hangs with the GPU head pointer stuck in a
-		 * batchbuffer bound at the last page of the aperture.  One page
-		 * should be enough to keep any prefetching inside of the
-		 * aperture.
-		 */
-		i915_gem_init_global_gtt(dev, 0, mappable_size,
-					 gtt_size);
-	}
-
+	i915_gem_init_global_gtt(dev);
 	ret = i915_gem_init_hw(dev);
 	mutex_unlock(&dev->struct_mutex);
 	if (ret) {
@@ -4105,8 +4086,14 @@
 void
 i915_gem_load(struct drm_device *dev)
 {
-	int i;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i;
+
+	dev_priv->slab =
+		kmem_cache_create("i915_gem_object",
+				  sizeof(struct drm_i915_gem_object), 0,
+				  SLAB_HWCACHE_ALIGN,
+				  NULL);
 
 	INIT_LIST_HEAD(&dev_priv->mm.active_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
index abeaafe..6a5af68 100644
--- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
@@ -281,8 +281,7 @@
 	if (IS_ERR(attach))
 		return ERR_CAST(attach);
 
-
-	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	obj = i915_gem_object_alloc(dev);
 	if (obj == NULL) {
 		ret = -ENOMEM;
 		goto fail_detach;
@@ -290,7 +289,7 @@
 
 	ret = drm_gem_private_object_init(dev, &obj->base, dma_buf->size);
 	if (ret) {
-		kfree(obj);
+		i915_gem_object_free(obj);
 		goto fail_detach;
 	}
 
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index d6a994a..163bb52b 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -150,17 +150,6 @@
 			  reloc->write_domain);
 		return ret;
 	}
-	if (unlikely(reloc->write_domain && target_obj->pending_write_domain &&
-		     reloc->write_domain != target_obj->pending_write_domain)) {
-		DRM_DEBUG("Write domain conflict: "
-			  "obj %p target %d offset %d "
-			  "new %08x old %08x\n",
-			  obj, reloc->target_handle,
-			  (int) reloc->offset,
-			  reloc->write_domain,
-			  target_obj->pending_write_domain);
-		return ret;
-	}
 
 	target_obj->pending_read_domains |= reloc->read_domains;
 	target_obj->pending_write_domain |= reloc->write_domain;
@@ -602,44 +591,11 @@
 }
 
 static int
-i915_gem_execbuffer_wait_for_flips(struct intel_ring_buffer *ring, u32 flips)
-{
-	u32 plane, flip_mask;
-	int ret;
-
-	/* Check for any pending flips. As we only maintain a flip queue depth
-	 * of 1, we can simply insert a WAIT for the next display flip prior
-	 * to executing the batch and avoid stalling the CPU.
-	 */
-
-	for (plane = 0; flips >> plane; plane++) {
-		if (((flips >> plane) & 1) == 0)
-			continue;
-
-		if (plane)
-			flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
-		else
-			flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-
-		ret = intel_ring_begin(ring, 2);
-		if (ret)
-			return ret;
-
-		intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
-		intel_ring_emit(ring, MI_NOOP);
-		intel_ring_advance(ring);
-	}
-
-	return 0;
-}
-
-static int
 i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring,
 				struct list_head *objects)
 {
 	struct drm_i915_gem_object *obj;
 	uint32_t flush_domains = 0;
-	uint32_t flips = 0;
 	int ret;
 
 	list_for_each_entry(obj, objects, exec_list) {
@@ -650,18 +606,9 @@
 		if (obj->base.write_domain & I915_GEM_DOMAIN_CPU)
 			i915_gem_clflush_object(obj);
 
-		if (obj->base.pending_write_domain)
-			flips |= atomic_read(&obj->pending_flip);
-
 		flush_domains |= obj->base.write_domain;
 	}
 
-	if (flips) {
-		ret = i915_gem_execbuffer_wait_for_flips(ring, flips);
-		if (ret)
-			return ret;
-	}
-
 	if (flush_domains & I915_GEM_DOMAIN_CPU)
 		i915_gem_chipset_flush(ring->dev);
 
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 2c150de..a4af0f7 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -282,7 +282,7 @@
 	uint32_t pd_offset;
 	struct intel_ring_buffer *ring;
 	struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
-	uint32_t __iomem *pd_addr;
+	gtt_pte_t __iomem *pd_addr;
 	uint32_t pd_entry;
 	int i;
 
@@ -290,7 +290,7 @@
 		return;
 
 
-	pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(uint32_t);
+	pd_addr = (gtt_pte_t __iomem*)dev_priv->mm.gsm + ppgtt->pd_offset/sizeof(gtt_pte_t);
 	for (i = 0; i < ppgtt->num_pd_entries; i++) {
 		dma_addr_t pt_addr;
 
@@ -367,7 +367,7 @@
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	gtt_pte_t scratch_pte;
-	gtt_pte_t __iomem *gtt_base = dev_priv->mm.gtt->gtt + first_entry;
+	gtt_pte_t __iomem *gtt_base = (gtt_pte_t __iomem *) dev_priv->mm.gsm + first_entry;
 	const int max_entries = dev_priv->mm.gtt->gtt_total_entries - first_entry;
 	int i;
 
@@ -432,7 +432,8 @@
 	struct scatterlist *sg = st->sgl;
 	const int first_entry = obj->gtt_space->start >> PAGE_SHIFT;
 	const int max_entries = dev_priv->mm.gtt->gtt_total_entries - first_entry;
-	gtt_pte_t __iomem *gtt_entries = dev_priv->mm.gtt->gtt + first_entry;
+	gtt_pte_t __iomem *gtt_entries =
+		(gtt_pte_t __iomem *)dev_priv->mm.gsm + first_entry;
 	int unused, i = 0;
 	unsigned int len, m = 0;
 	dma_addr_t addr;
@@ -525,26 +526,103 @@
 	}
 }
 
-void i915_gem_init_global_gtt(struct drm_device *dev,
-			      unsigned long start,
-			      unsigned long mappable_end,
-			      unsigned long end)
+void i915_gem_setup_global_gtt(struct drm_device *dev,
+			       unsigned long start,
+			       unsigned long mappable_end,
+			       unsigned long end)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_mm_node *entry;
+	struct drm_i915_gem_object *obj;
+	unsigned long hole_start, hole_end;
 
-	/* Substract the guard page ... */
+	/* Subtract the guard page ... */
 	drm_mm_init(&dev_priv->mm.gtt_space, start, end - start - PAGE_SIZE);
 	if (!HAS_LLC(dev))
 		dev_priv->mm.gtt_space.color_adjust = i915_gtt_color_adjust;
 
+	/* Mark any preallocated objects as occupied */
+	list_for_each_entry(obj, &dev_priv->mm.bound_list, gtt_list) {
+		DRM_DEBUG_KMS("reserving preallocated space: %x + %zx\n",
+			      obj->gtt_offset, obj->base.size);
+
+		BUG_ON(obj->gtt_space != I915_GTT_RESERVED);
+		obj->gtt_space = drm_mm_create_block(&dev_priv->mm.gtt_space,
+						     obj->gtt_offset,
+						     obj->base.size,
+						     false);
+		obj->has_global_gtt_mapping = 1;
+	}
+
 	dev_priv->mm.gtt_start = start;
 	dev_priv->mm.gtt_mappable_end = mappable_end;
 	dev_priv->mm.gtt_end = end;
 	dev_priv->mm.gtt_total = end - start;
 	dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
 
-	/* ... but ensure that we clear the entire range. */
-	i915_ggtt_clear_range(dev, start / PAGE_SIZE, (end-start) / PAGE_SIZE);
+	/* Clear any non-preallocated blocks */
+	drm_mm_for_each_hole(entry, &dev_priv->mm.gtt_space,
+			     hole_start, hole_end) {
+		DRM_DEBUG_KMS("clearing unused GTT space: [%lx, %lx]\n",
+			      hole_start, hole_end);
+		i915_ggtt_clear_range(dev,
+				      hole_start / PAGE_SIZE,
+				      (hole_end-hole_start) / PAGE_SIZE);
+	}
+
+	/* And finally clear the reserved guard page */
+	i915_ggtt_clear_range(dev, end / PAGE_SIZE - 1, 1);
+}
+
+static bool
+intel_enable_ppgtt(struct drm_device *dev)
+{
+	if (i915_enable_ppgtt >= 0)
+		return i915_enable_ppgtt;
+
+#ifdef CONFIG_INTEL_IOMMU
+	/* Disable ppgtt on SNB if VT-d is on. */
+	if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
+		return false;
+#endif
+
+	return true;
+}
+
+void i915_gem_init_global_gtt(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long gtt_size, mappable_size;
+	int ret;
+
+	gtt_size = dev_priv->mm.gtt->gtt_total_entries << PAGE_SHIFT;
+	mappable_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+
+	if (intel_enable_ppgtt(dev) && HAS_ALIASING_PPGTT(dev)) {
+		/* PPGTT pdes are stolen from global gtt ptes, so shrink the
+		 * aperture accordingly when using aliasing ppgtt. */
+		gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
+
+		i915_gem_setup_global_gtt(dev, 0, mappable_size, gtt_size);
+
+		ret = i915_gem_init_aliasing_ppgtt(dev);
+		if (ret) {
+			mutex_unlock(&dev->struct_mutex);
+			return;
+		}
+	} else {
+		/* Let GEM Manage all of the aperture.
+		 *
+		 * However, leave one page at the end still bound to the scratch
+		 * page.  There are a number of places where the hardware
+		 * apparently prefetches past the end of the object, and we've
+		 * seen multiple hangs with the GPU head pointer stuck in a
+		 * batchbuffer bound at the last page of the aperture.  One page
+		 * should be enough to keep any prefetching inside of the
+		 * aperture.
+		 */
+		i915_gem_setup_global_gtt(dev, 0, mappable_size, gtt_size);
+	}
 }
 
 static int setup_scratch_page(struct drm_device *dev)
@@ -674,9 +752,9 @@
 		goto err_out;
 	}
 
-	dev_priv->mm.gtt->gtt = ioremap_wc(gtt_bus_addr,
-					   dev_priv->mm.gtt->gtt_total_entries * sizeof(gtt_pte_t));
-	if (!dev_priv->mm.gtt->gtt) {
+	dev_priv->mm.gsm = ioremap_wc(gtt_bus_addr,
+				      dev_priv->mm.gtt->gtt_total_entries * sizeof(gtt_pte_t));
+	if (!dev_priv->mm.gsm) {
 		DRM_ERROR("Failed to map the gtt page table\n");
 		teardown_scratch_page(dev);
 		ret = -ENOMEM;
@@ -700,7 +778,7 @@
 void i915_gem_gtt_fini(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	iounmap(dev_priv->mm.gtt->gtt);
+	iounmap(dev_priv->mm.gsm);
 	teardown_scratch_page(dev);
 	if (INTEL_INFO(dev)->gen < 6)
 		intel_gmch_remove();
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 8e91083..f21ae17 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -42,85 +42,73 @@
  * for is a boon.
  */
 
-#define PTE_ADDRESS_MASK		0xfffff000
-#define PTE_ADDRESS_MASK_HIGH		0x000000f0 /* i915+ */
-#define PTE_MAPPING_TYPE_UNCACHED	(0 << 1)
-#define PTE_MAPPING_TYPE_DCACHE		(1 << 1) /* i830 only */
-#define PTE_MAPPING_TYPE_CACHED		(3 << 1)
-#define PTE_MAPPING_TYPE_MASK		(3 << 1)
-#define PTE_VALID			(1 << 0)
-
-/**
- * i915_stolen_to_phys - take an offset into stolen memory and turn it into
- *                       a physical one
- * @dev: drm device
- * @offset: address to translate
- *
- * Some chip functions require allocations from stolen space and need the
- * physical address of the memory in question.
- */
-static unsigned long i915_stolen_to_phys(struct drm_device *dev, u32 offset)
+static unsigned long i915_stolen_to_physical(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct pci_dev *pdev = dev_priv->bridge_dev;
 	u32 base;
 
-#if 0
 	/* On the machines I have tested the Graphics Base of Stolen Memory
-	 * is unreliable, so compute the base by subtracting the stolen memory
-	 * from the Top of Low Usable DRAM which is where the BIOS places
-	 * the graphics stolen memory.
+	 * is unreliable, so on those compute the base by subtracting the
+	 * stolen memory from the Top of Low Usable DRAM which is where the
+	 * BIOS places the graphics stolen memory.
+	 *
+	 * On gen2, the layout is slightly different with the Graphics Segment
+	 * immediately following Top of Memory (or Top of Usable DRAM). Note
+	 * it appears that TOUD is only reported by 865g, so we just use the
+	 * top of memory as determined by the e820 probe.
+	 *
+	 * XXX gen2 requires an unavailable symbol and 945gm fails with
+	 * its value of TOLUD.
 	 */
-	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
-		/* top 32bits are reserved = 0 */
+	base = 0;
+	if (INTEL_INFO(dev)->gen >= 6) {
+		/* Read Base Data of Stolen Memory Register (BDSM) directly.
+		 * Note that there is also a MCHBAR miror at 0x1080c0 or
+		 * we could use device 2:0x5c instead.
+		*/
+		pci_read_config_dword(pdev, 0xB0, &base);
+		base &= ~4095; /* lower bits used for locking register */
+	} else if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
+		/* Read Graphics Base of Stolen Memory directly */
 		pci_read_config_dword(pdev, 0xA4, &base);
-	} else {
-		/* XXX presume 8xx is the same as i915 */
-		pci_bus_read_config_dword(pdev->bus, 2, 0x5C, &base);
-	}
-#else
-	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
-		u16 val;
-		pci_read_config_word(pdev, 0xb0, &val);
-		base = val >> 4 << 20;
-	} else {
+#if 0
+	} else if (IS_GEN3(dev)) {
 		u8 val;
+		/* Stolen is immediately below Top of Low Usable DRAM */
 		pci_read_config_byte(pdev, 0x9c, &val);
 		base = val >> 3 << 27;
-	}
-	base -= dev_priv->mm.gtt->stolen_size;
+		base -= dev_priv->mm.gtt->stolen_size;
+	} else {
+		/* Stolen is immediately above Top of Memory */
+		base = max_low_pfn_mapped << PAGE_SHIFT;
 #endif
+	}
 
-	return base + offset;
+	return base;
 }
 
-static void i915_warn_stolen(struct drm_device *dev)
-{
-	DRM_INFO("not enough stolen space for compressed buffer, disabling\n");
-	DRM_INFO("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
-}
-
-static void i915_setup_compression(struct drm_device *dev, int size)
+static int i915_setup_compression(struct drm_device *dev, int size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
-	unsigned long cfb_base;
-	unsigned long ll_base = 0;
 
-	/* Just in case the BIOS is doing something questionable. */
-	intel_disable_fbc(dev);
-
-	compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0);
+	/* Try to over-allocate to reduce reallocations and fragmentation */
+	compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen,
+					   size <<= 1, 4096, 0);
+	if (!compressed_fb)
+		compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen,
+						   size >>= 1, 4096, 0);
 	if (compressed_fb)
 		compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
 	if (!compressed_fb)
 		goto err;
 
-	cfb_base = i915_stolen_to_phys(dev, compressed_fb->start);
-	if (!cfb_base)
-		goto err_fb;
-
-	if (!(IS_GM45(dev) || HAS_PCH_SPLIT(dev))) {
+	if (HAS_PCH_SPLIT(dev))
+		I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
+	else if (IS_GM45(dev)) {
+		I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
+	} else {
 		compressed_llb = drm_mm_search_free(&dev_priv->mm.stolen,
 						    4096, 4096, 0);
 		if (compressed_llb)
@@ -129,73 +117,206 @@
 		if (!compressed_llb)
 			goto err_fb;
 
-		ll_base = i915_stolen_to_phys(dev, compressed_llb->start);
-		if (!ll_base)
-			goto err_llb;
-	}
+		dev_priv->compressed_llb = compressed_llb;
 
-	dev_priv->cfb_size = size;
+		I915_WRITE(FBC_CFB_BASE,
+			   dev_priv->mm.stolen_base + compressed_fb->start);
+		I915_WRITE(FBC_LL_BASE,
+			   dev_priv->mm.stolen_base + compressed_llb->start);
+	}
 
 	dev_priv->compressed_fb = compressed_fb;
-	if (HAS_PCH_SPLIT(dev))
-		I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
-	else if (IS_GM45(dev)) {
-		I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
-	} else {
-		I915_WRITE(FBC_CFB_BASE, cfb_base);
-		I915_WRITE(FBC_LL_BASE, ll_base);
-		dev_priv->compressed_llb = compressed_llb;
-	}
+	dev_priv->cfb_size = size;
 
-	DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n",
-		      cfb_base, ll_base, size >> 20);
-	return;
+	DRM_DEBUG_KMS("reserved %d bytes of contiguous stolen space for FBC\n",
+		      size);
 
-err_llb:
-	drm_mm_put_block(compressed_llb);
+	return 0;
+
 err_fb:
 	drm_mm_put_block(compressed_fb);
 err:
-	dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
-	i915_warn_stolen(dev);
+	return -ENOSPC;
 }
 
-static void i915_cleanup_compression(struct drm_device *dev)
+int i915_gem_stolen_setup_compression(struct drm_device *dev, int size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	drm_mm_put_block(dev_priv->compressed_fb);
+	if (dev_priv->mm.stolen_base == 0)
+		return -ENODEV;
+
+	if (size < dev_priv->cfb_size)
+		return 0;
+
+	/* Release any current block */
+	i915_gem_stolen_cleanup_compression(dev);
+
+	return i915_setup_compression(dev, size);
+}
+
+void i915_gem_stolen_cleanup_compression(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->cfb_size == 0)
+		return;
+
+	if (dev_priv->compressed_fb)
+		drm_mm_put_block(dev_priv->compressed_fb);
+
 	if (dev_priv->compressed_llb)
 		drm_mm_put_block(dev_priv->compressed_llb);
+
+	dev_priv->cfb_size = 0;
 }
 
 void i915_gem_cleanup_stolen(struct drm_device *dev)
 {
-	if (I915_HAS_FBC(dev) && i915_powersave)
-		i915_cleanup_compression(dev);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	i915_gem_stolen_cleanup_compression(dev);
+	drm_mm_takedown(&dev_priv->mm.stolen);
 }
 
 int i915_gem_init_stolen(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long prealloc_size = dev_priv->mm.gtt->stolen_size;
+
+	dev_priv->mm.stolen_base = i915_stolen_to_physical(dev);
+	if (dev_priv->mm.stolen_base == 0)
+		return 0;
+
+	DRM_DEBUG_KMS("found %d bytes of stolen memory at %08lx\n",
+		      dev_priv->mm.gtt->stolen_size, dev_priv->mm.stolen_base);
 
 	/* Basic memrange allocator for stolen space */
-	drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size);
-
-	/* Try to set up FBC with a reasonable compressed buffer size */
-	if (I915_HAS_FBC(dev) && i915_powersave) {
-		int cfb_size;
-
-		/* Leave 1M for line length buffer & misc. */
-
-		/* Try to get a 32M buffer... */
-		if (prealloc_size > (36*1024*1024))
-			cfb_size = 32*1024*1024;
-		else /* fall back to 7/8 of the stolen space */
-			cfb_size = prealloc_size * 7 / 8;
-		i915_setup_compression(dev, cfb_size);
-	}
+	drm_mm_init(&dev_priv->mm.stolen, 0, dev_priv->mm.gtt->stolen_size);
 
 	return 0;
 }
+
+static struct sg_table *
+i915_pages_create_for_stolen(struct drm_device *dev,
+			     u32 offset, u32 size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct sg_table *st;
+	struct scatterlist *sg;
+
+	DRM_DEBUG_DRIVER("offset=0x%x, size=%d\n", offset, size);
+	BUG_ON(offset > dev_priv->mm.gtt->stolen_size - size);
+
+	/* We hide that we have no struct page backing our stolen object
+	 * by wrapping the contiguous physical allocation with a fake
+	 * dma mapping in a single scatterlist.
+	 */
+
+	st = kmalloc(sizeof(*st), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	if (sg_alloc_table(st, 1, GFP_KERNEL)) {
+		kfree(st);
+		return NULL;
+	}
+
+	sg = st->sgl;
+	sg->offset = offset;
+	sg->length = size;
+
+	sg_dma_address(sg) = (dma_addr_t)dev_priv->mm.stolen_base + offset;
+	sg_dma_len(sg) = size;
+
+	return st;
+}
+
+static int i915_gem_object_get_pages_stolen(struct drm_i915_gem_object *obj)
+{
+	BUG();
+	return -EINVAL;
+}
+
+static void i915_gem_object_put_pages_stolen(struct drm_i915_gem_object *obj)
+{
+	/* Should only be called during free */
+	sg_free_table(obj->pages);
+	kfree(obj->pages);
+}
+
+static const struct drm_i915_gem_object_ops i915_gem_object_stolen_ops = {
+	.get_pages = i915_gem_object_get_pages_stolen,
+	.put_pages = i915_gem_object_put_pages_stolen,
+};
+
+static struct drm_i915_gem_object *
+_i915_gem_object_create_stolen(struct drm_device *dev,
+			       struct drm_mm_node *stolen)
+{
+	struct drm_i915_gem_object *obj;
+
+	obj = i915_gem_object_alloc(dev);
+	if (obj == NULL)
+		return NULL;
+
+	if (drm_gem_private_object_init(dev, &obj->base, stolen->size))
+		goto cleanup;
+
+	i915_gem_object_init(obj, &i915_gem_object_stolen_ops);
+
+	obj->pages = i915_pages_create_for_stolen(dev,
+						  stolen->start, stolen->size);
+	if (obj->pages == NULL)
+		goto cleanup;
+
+	obj->has_dma_mapping = true;
+	obj->pages_pin_count = 1;
+	obj->stolen = stolen;
+
+	obj->base.write_domain = I915_GEM_DOMAIN_GTT;
+	obj->base.read_domains = I915_GEM_DOMAIN_GTT;
+	obj->cache_level = I915_CACHE_NONE;
+
+	return obj;
+
+cleanup:
+	i915_gem_object_free(obj);
+	return NULL;
+}
+
+struct drm_i915_gem_object *
+i915_gem_object_create_stolen(struct drm_device *dev, u32 size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct drm_mm_node *stolen;
+
+	if (dev_priv->mm.stolen_base == 0)
+		return NULL;
+
+	DRM_DEBUG_KMS("creating stolen object: size=%x\n", size);
+	if (size == 0)
+		return NULL;
+
+	stolen = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0);
+	if (stolen)
+		stolen = drm_mm_get_block(stolen, size, 4096);
+	if (stolen == NULL)
+		return NULL;
+
+	obj = _i915_gem_object_create_stolen(dev, stolen);
+	if (obj)
+		return obj;
+
+	drm_mm_put_block(stolen);
+	return NULL;
+}
+
+void
+i915_gem_object_release_stolen(struct drm_i915_gem_object *obj)
+{
+	if (obj->stolen) {
+		drm_mm_put_block(obj->stolen);
+		obj->stolen = NULL;
+	}
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index cedbfd7..65f1d4f 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -396,6 +396,18 @@
 	/* we have to maintain this existing ABI... */
 	args->stride = obj->stride;
 	args->tiling_mode = obj->tiling_mode;
+
+	/* Try to preallocate memory required to save swizzling on put-pages */
+	if (i915_gem_object_needs_bit17_swizzle(obj)) {
+		if (obj->bit_17 == NULL) {
+			obj->bit_17 = kmalloc(BITS_TO_LONGS(obj->base.size >> PAGE_SHIFT) *
+					      sizeof(long), GFP_KERNEL);
+		}
+	} else {
+		kfree(obj->bit_17);
+		obj->bit_17 = NULL;
+	}
+
 	drm_gem_object_unreference(&obj->base);
 	mutex_unlock(&dev->struct_mutex);
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 2220dec..6689a61 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -287,6 +287,10 @@
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *encoder;
 
+	/* HPD irq before everything is fully set up. */
+	if (!dev_priv->enable_hotplug_processing)
+		return;
+
 	mutex_lock(&mode_config->mutex);
 	DRM_DEBUG_KMS("running encoder hotplug functions\n");
 
@@ -300,9 +304,6 @@
 	drm_helper_hpd_irq_event(dev);
 }
 
-/* defined intel_pm.c */
-extern spinlock_t mchdev_lock;
-
 static void ironlake_handle_rps_change(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -524,6 +525,20 @@
 	queue_work(dev_priv->wq, &dev_priv->rps.work);
 }
 
+static void gmbus_irq_handler(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	wake_up_all(&dev_priv->gmbus_wait_queue);
+}
+
+static void dp_aux_irq_handler(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	wake_up_all(&dev_priv->gmbus_wait_queue);
+}
+
 static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
@@ -533,7 +548,6 @@
 	unsigned long irqflags;
 	int pipe;
 	u32 pipe_stats[I915_MAX_PIPES];
-	bool blc_event;
 
 	atomic_inc(&dev_priv->irq_received);
 
@@ -590,8 +604,8 @@
 			I915_READ(PORT_HOTPLUG_STAT);
 		}
 
-		if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
-			blc_event = true;
+		if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
+			gmbus_irq_handler(dev);
 
 		if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
 			gen6_queue_rps_work(dev_priv, pm_iir);
@@ -618,8 +632,11 @@
 				 (pch_iir & SDE_AUDIO_POWER_MASK) >>
 				 SDE_AUDIO_POWER_SHIFT);
 
+	if (pch_iir & SDE_AUX_MASK)
+		dp_aux_irq_handler(dev);
+
 	if (pch_iir & SDE_GMBUS)
-		DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+		gmbus_irq_handler(dev);
 
 	if (pch_iir & SDE_AUDIO_HDCP_MASK)
 		DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
@@ -662,10 +679,10 @@
 				 SDE_AUDIO_POWER_SHIFT_CPT);
 
 	if (pch_iir & SDE_AUX_MASK_CPT)
-		DRM_DEBUG_DRIVER("AUX channel interrupt\n");
+		dp_aux_irq_handler(dev);
 
 	if (pch_iir & SDE_GMBUS_CPT)
-		DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+		gmbus_irq_handler(dev);
 
 	if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
 		DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
@@ -703,6 +720,9 @@
 
 	de_iir = I915_READ(DEIIR);
 	if (de_iir) {
+		if (de_iir & DE_AUX_CHANNEL_A_IVB)
+			dp_aux_irq_handler(dev);
+
 		if (de_iir & DE_GSE_IVB)
 			intel_opregion_gse_intr(dev);
 
@@ -758,7 +778,7 @@
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int ret = IRQ_NONE;
-	u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir;
+	u32 de_iir, gt_iir, de_ier, pm_iir;
 
 	atomic_inc(&dev_priv->irq_received);
 
@@ -769,11 +789,9 @@
 
 	de_iir = I915_READ(DEIIR);
 	gt_iir = I915_READ(GTIIR);
-	pch_iir = I915_READ(SDEIIR);
 	pm_iir = I915_READ(GEN6_PMIIR);
 
-	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 &&
-	    (!IS_GEN6(dev) || pm_iir == 0))
+	if (de_iir == 0 && gt_iir == 0 && (!IS_GEN6(dev) || pm_iir == 0))
 		goto done;
 
 	ret = IRQ_HANDLED;
@@ -783,6 +801,9 @@
 	else
 		snb_gt_irq_handler(dev, dev_priv, gt_iir);
 
+	if (de_iir & DE_AUX_CHANNEL_A)
+		dp_aux_irq_handler(dev);
+
 	if (de_iir & DE_GSE)
 		intel_opregion_gse_intr(dev);
 
@@ -804,10 +825,15 @@
 
 	/* check event from PCH */
 	if (de_iir & DE_PCH_EVENT) {
+		u32 pch_iir = I915_READ(SDEIIR);
+
 		if (HAS_PCH_CPT(dev))
 			cpt_irq_handler(dev, pch_iir);
 		else
 			ibx_irq_handler(dev, pch_iir);
+
+		/* should clear PCH hotplug event before clear CPU irq */
+		I915_WRITE(SDEIIR, pch_iir);
 	}
 
 	if (IS_GEN5(dev) &&  de_iir & DE_PCU_EVENT)
@@ -816,8 +842,6 @@
 	if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
 		gen6_queue_rps_work(dev_priv, pm_iir);
 
-	/* should clear PCH hotplug event before clear CPU irq */
-	I915_WRITE(SDEIIR, pch_iir);
 	I915_WRITE(GTIIR, gt_iir);
 	I915_WRITE(DEIIR, de_iir);
 	I915_WRITE(GEN6_PMIIR, pm_iir);
@@ -928,6 +952,14 @@
 						     reloc_offset);
 			memcpy_fromio(d, s, PAGE_SIZE);
 			io_mapping_unmap_atomic(s);
+		} else if (src->stolen) {
+			unsigned long offset;
+
+			offset = dev_priv->mm.stolen_base;
+			offset += src->stolen->start;
+			offset += i << PAGE_SHIFT;
+
+			memcpy_fromio(d, (void __iomem *) offset, PAGE_SIZE);
 		} else {
 			struct page *page;
 			void *s;
@@ -1074,6 +1106,8 @@
 			error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
 		break;
 
+	default:
+		BUG();
 	}
 }
 
@@ -1854,7 +1888,8 @@
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	/* enable kind of interrupts always enabled */
 	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
-			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
+			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
+			   DE_AUX_CHANNEL_A;
 	u32 render_irqs;
 	u32 hotplug_mask;
 
@@ -1888,12 +1923,15 @@
 		hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
 				SDE_PORTB_HOTPLUG_CPT |
 				SDE_PORTC_HOTPLUG_CPT |
-				SDE_PORTD_HOTPLUG_CPT);
+				SDE_PORTD_HOTPLUG_CPT |
+				SDE_GMBUS_CPT |
+				SDE_AUX_MASK_CPT);
 	} else {
 		hotplug_mask = (SDE_CRT_HOTPLUG |
 				SDE_PORTB_HOTPLUG |
 				SDE_PORTC_HOTPLUG |
 				SDE_PORTD_HOTPLUG |
+				SDE_GMBUS |
 				SDE_AUX_MASK);
 	}
 
@@ -1924,7 +1962,8 @@
 		DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB |
 		DE_PLANEC_FLIP_DONE_IVB |
 		DE_PLANEB_FLIP_DONE_IVB |
-		DE_PLANEA_FLIP_DONE_IVB;
+		DE_PLANEA_FLIP_DONE_IVB |
+		DE_AUX_CHANNEL_A_IVB;
 	u32 render_irqs;
 	u32 hotplug_mask;
 
@@ -1953,7 +1992,9 @@
 	hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
 			SDE_PORTB_HOTPLUG_CPT |
 			SDE_PORTC_HOTPLUG_CPT |
-			SDE_PORTD_HOTPLUG_CPT);
+			SDE_PORTD_HOTPLUG_CPT |
+			SDE_GMBUS_CPT |
+			SDE_AUX_MASK_CPT);
 	dev_priv->pch_irq_mask = ~hotplug_mask;
 
 	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
@@ -1970,7 +2011,6 @@
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u32 enable_mask;
-	u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
 	u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
 	u32 render_irqs;
 	u16 msid;
@@ -1999,6 +2039,9 @@
 	msid |= (1<<14);
 	pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
 
+	I915_WRITE(PORT_HOTPLUG_EN, 0);
+	POSTING_READ(PORT_HOTPLUG_EN);
+
 	I915_WRITE(VLV_IMR, dev_priv->irq_mask);
 	I915_WRITE(VLV_IER, enable_mask);
 	I915_WRITE(VLV_IIR, 0xffffffff);
@@ -2007,6 +2050,7 @@
 	POSTING_READ(VLV_IER);
 
 	i915_enable_pipestat(dev_priv, 0, pipestat_enable);
+	i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
 	i915_enable_pipestat(dev_priv, 1, pipestat_enable);
 
 	I915_WRITE(VLV_IIR, 0xffffffff);
@@ -2027,6 +2071,15 @@
 #endif
 
 	I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
+
+	return 0;
+}
+
+static void valleyview_hpd_irq_setup(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
 	/* Note HDMI and DP share bits */
 	if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
 		hotplug_en |= HDMIB_HOTPLUG_INT_EN;
@@ -2044,8 +2097,6 @@
 	}
 
 	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
-	return 0;
 }
 
 static void valleyview_irq_uninstall(struct drm_device *dev)
@@ -2275,6 +2326,9 @@
 		I915_USER_INTERRUPT;
 
 	if (I915_HAS_HOTPLUG(dev)) {
+		I915_WRITE(PORT_HOTPLUG_EN, 0);
+		POSTING_READ(PORT_HOTPLUG_EN);
+
 		/* Enable in IER... */
 		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 		/* and unmask in IMR */
@@ -2285,8 +2339,18 @@
 	I915_WRITE(IER, enable_mask);
 	POSTING_READ(IER);
 
+	intel_opregion_enable_asle(dev);
+
+	return 0;
+}
+
+static void i915_hpd_irq_setup(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 hotplug_en;
+
 	if (I915_HAS_HOTPLUG(dev)) {
-		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+		hotplug_en = I915_READ(PORT_HOTPLUG_EN);
 
 		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
 			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
@@ -2307,10 +2371,6 @@
 
 		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 	}
-
-	intel_opregion_enable_asle(dev);
-
-	return 0;
 }
 
 static irqreturn_t i915_irq_handler(int irq, void *arg)
@@ -2470,7 +2530,6 @@
 static int i965_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 hotplug_en;
 	u32 enable_mask;
 	u32 error_mask;
 
@@ -2491,6 +2550,7 @@
 
 	dev_priv->pipestat[0] = 0;
 	dev_priv->pipestat[1] = 0;
+	i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
 
 	/*
 	 * Enable some error detection, note the instruction error mask
@@ -2511,6 +2571,19 @@
 	I915_WRITE(IER, enable_mask);
 	POSTING_READ(IER);
 
+	I915_WRITE(PORT_HOTPLUG_EN, 0);
+	POSTING_READ(PORT_HOTPLUG_EN);
+
+	intel_opregion_enable_asle(dev);
+
+	return 0;
+}
+
+static void i965_hpd_irq_setup(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 hotplug_en;
+
 	/* Note HDMI and DP share hotplug bits */
 	hotplug_en = 0;
 	if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
@@ -2545,10 +2618,6 @@
 	/* Ignore TV since it's buggy */
 
 	I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
-
-	intel_opregion_enable_asle(dev);
-
-	return 0;
 }
 
 static irqreturn_t i965_irq_handler(int irq, void *arg)
@@ -2644,6 +2713,9 @@
 		if (blc_event || (iir & I915_ASLE_INTERRUPT))
 			intel_opregion_asle_intr(dev);
 
+		if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
+			gmbus_irq_handler(dev);
+
 		/* With MSI, interrupts are only generated when iir
 		 * transitions from zero to nonzero.  If another bit got
 		 * set while we were handling the existing iir bits, then
@@ -2699,6 +2771,11 @@
 	INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
 	INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
 
+	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
+		    (unsigned long) dev);
+
+	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
+
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
@@ -2719,7 +2796,8 @@
 		dev->driver->irq_uninstall = valleyview_irq_uninstall;
 		dev->driver->enable_vblank = valleyview_enable_vblank;
 		dev->driver->disable_vblank = valleyview_disable_vblank;
-	} else if (IS_IVYBRIDGE(dev)) {
+		dev_priv->display.hpd_irq_setup = valleyview_hpd_irq_setup;
+	} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
 		/* Share pre & uninstall handlers with ILK/SNB */
 		dev->driver->irq_handler = ivybridge_irq_handler;
 		dev->driver->irq_preinstall = ironlake_irq_preinstall;
@@ -2727,14 +2805,6 @@
 		dev->driver->irq_uninstall = ironlake_irq_uninstall;
 		dev->driver->enable_vblank = ivybridge_enable_vblank;
 		dev->driver->disable_vblank = ivybridge_disable_vblank;
-	} else if (IS_HASWELL(dev)) {
-		/* Share interrupts handling with IVB */
-		dev->driver->irq_handler = ivybridge_irq_handler;
-		dev->driver->irq_preinstall = ironlake_irq_preinstall;
-		dev->driver->irq_postinstall = ivybridge_irq_postinstall;
-		dev->driver->irq_uninstall = ironlake_irq_uninstall;
-		dev->driver->enable_vblank = ivybridge_enable_vblank;
-		dev->driver->disable_vblank = ivybridge_disable_vblank;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev->driver->irq_handler = ironlake_irq_handler;
 		dev->driver->irq_preinstall = ironlake_irq_preinstall;
@@ -2753,13 +2823,23 @@
 			dev->driver->irq_postinstall = i915_irq_postinstall;
 			dev->driver->irq_uninstall = i915_irq_uninstall;
 			dev->driver->irq_handler = i915_irq_handler;
+			dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 		} else {
 			dev->driver->irq_preinstall = i965_irq_preinstall;
 			dev->driver->irq_postinstall = i965_irq_postinstall;
 			dev->driver->irq_uninstall = i965_irq_uninstall;
 			dev->driver->irq_handler = i965_irq_handler;
+			dev_priv->display.hpd_irq_setup = i965_hpd_irq_setup;
 		}
 		dev->driver->enable_vblank = i915_enable_vblank;
 		dev->driver->disable_vblank = i915_disable_vblank;
 	}
 }
+
+void intel_hpd_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->display.hpd_irq_setup)
+		dev_priv->display.hpd_irq_setup(dev);
+}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 186ee5c..3b039f4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -142,6 +142,7 @@
 #define   VGA_MSR_CGA_MODE (1<<0)
 
 #define VGA_SR_INDEX 0x3c4
+#define SR01			1
 #define VGA_SR_DATA 0x3c5
 
 #define VGA_AR_INDEX 0x3c0
@@ -940,23 +941,6 @@
 #define   DPLL_LOCK_VLV			(1<<15)
 #define   DPLL_INTEGRATED_CLOCK_VLV	(1<<13)
 
-#define SRX_INDEX		0x3c4
-#define SRX_DATA		0x3c5
-#define SR01			1
-#define SR01_SCREEN_OFF		(1<<5)
-
-#define PPCR			0x61204
-#define PPCR_ON			(1<<0)
-
-#define DVOB			0x61140
-#define DVOB_ON			(1<<31)
-#define DVOC			0x61160
-#define DVOC_ON			(1<<31)
-#define LVDS			0x61180
-#define LVDS_ON			(1<<31)
-
-/* Scratch pad debug 0 reg:
- */
 #define   DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
 /*
  * The i830 generation, in LVDS mode, defines P1 as the bit number set within
@@ -1893,8 +1877,6 @@
 #define   PFIT_SCALING_PILLAR	(2 << 26)
 #define   PFIT_SCALING_LETTER	(3 << 26)
 #define PFIT_PGM_RATIOS	0x61234
-#define   PFIT_VERT_SCALE_MASK			0xfff00000
-#define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
 /* Pre-965 */
 #define		PFIT_VERT_SCALE_SHIFT		20
 #define		PFIT_VERT_SCALE_MASK		0xfff00000
@@ -2668,11 +2650,11 @@
 #define   PIPECONF_INTERLACED_DBL_ILK		(4 << 21) /* ilk/snb only */
 #define   PIPECONF_PFIT_PF_INTERLACED_DBL_ILK	(5 << 21) /* ilk/snb only */
 #define   PIPECONF_CXSR_DOWNCLOCK	(1<<16)
-#define   PIPECONF_BPP_MASK	(0x000000e0)
-#define   PIPECONF_BPP_8	(0<<5)
-#define   PIPECONF_BPP_10	(1<<5)
-#define   PIPECONF_BPP_6	(2<<5)
-#define   PIPECONF_BPP_12	(3<<5)
+#define   PIPECONF_BPC_MASK	(0x7 << 5)
+#define   PIPECONF_8BPC		(0<<5)
+#define   PIPECONF_10BPC	(1<<5)
+#define   PIPECONF_6BPC		(2<<5)
+#define   PIPECONF_12BPC	(3<<5)
 #define   PIPECONF_DITHER_EN	(1<<4)
 #define   PIPECONF_DITHER_TYPE_MASK (0x0000000c)
 #define   PIPECONF_DITHER_TYPE_SP (0<<2)
@@ -2716,11 +2698,6 @@
 #define   PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL<<2) /* 965 or later */
 #define   PIPE_VBLANK_INTERRUPT_STATUS		(1UL<<1)
 #define   PIPE_OVERLAY_UPDATED_STATUS		(1UL<<0)
-#define   PIPE_BPC_MASK				(7 << 5) /* Ironlake */
-#define   PIPE_8BPC				(0 << 5)
-#define   PIPE_10BPC				(1 << 5)
-#define   PIPE_6BPC				(2 << 5)
-#define   PIPE_12BPC				(3 << 5)
 
 #define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
 #define PIPECONF(tran) _TRANSCODER(tran, _PIPEACONF, _PIPEBCONF)
@@ -3578,27 +3555,30 @@
 #define PORTD_PULSE_DURATION_6ms        (2 << 18)
 #define PORTD_PULSE_DURATION_100ms      (3 << 18)
 #define PORTD_PULSE_DURATION_MASK	(3 << 18)
-#define PORTD_HOTPLUG_NO_DETECT         (0)
-#define PORTD_HOTPLUG_SHORT_DETECT      (1 << 16)
-#define PORTD_HOTPLUG_LONG_DETECT       (1 << 17)
+#define PORTD_HOTPLUG_STATUS_MASK	(0x3 << 16)
+#define  PORTD_HOTPLUG_NO_DETECT	(0 << 16)
+#define  PORTD_HOTPLUG_SHORT_DETECT	(1 << 16)
+#define  PORTD_HOTPLUG_LONG_DETECT	(2 << 16)
 #define PORTC_HOTPLUG_ENABLE            (1 << 12)
 #define PORTC_PULSE_DURATION_2ms        (0)
 #define PORTC_PULSE_DURATION_4_5ms      (1 << 10)
 #define PORTC_PULSE_DURATION_6ms        (2 << 10)
 #define PORTC_PULSE_DURATION_100ms      (3 << 10)
 #define PORTC_PULSE_DURATION_MASK	(3 << 10)
-#define PORTC_HOTPLUG_NO_DETECT         (0)
-#define PORTC_HOTPLUG_SHORT_DETECT      (1 << 8)
-#define PORTC_HOTPLUG_LONG_DETECT       (1 << 9)
+#define PORTC_HOTPLUG_STATUS_MASK	(0x3 << 8)
+#define  PORTC_HOTPLUG_NO_DETECT	(0 << 8)
+#define  PORTC_HOTPLUG_SHORT_DETECT	(1 << 8)
+#define  PORTC_HOTPLUG_LONG_DETECT	(2 << 8)
 #define PORTB_HOTPLUG_ENABLE            (1 << 4)
 #define PORTB_PULSE_DURATION_2ms        (0)
 #define PORTB_PULSE_DURATION_4_5ms      (1 << 2)
 #define PORTB_PULSE_DURATION_6ms        (2 << 2)
 #define PORTB_PULSE_DURATION_100ms      (3 << 2)
 #define PORTB_PULSE_DURATION_MASK	(3 << 2)
-#define PORTB_HOTPLUG_NO_DETECT         (0)
-#define PORTB_HOTPLUG_SHORT_DETECT      (1 << 0)
-#define PORTB_HOTPLUG_LONG_DETECT       (1 << 1)
+#define PORTB_HOTPLUG_STATUS_MASK	(0x3 << 0)
+#define  PORTB_HOTPLUG_NO_DETECT	(0 << 0)
+#define  PORTB_HOTPLUG_SHORT_DETECT	(1 << 0)
+#define  PORTB_HOTPLUG_LONG_DETECT	(2 << 0)
 
 #define PCH_GPIOA               0xc5010
 #define PCH_GPIOB               0xc5014
@@ -3817,8 +3797,6 @@
 #define  TRANS_FSYNC_DELAY_HB2  (1<<27)
 #define  TRANS_FSYNC_DELAY_HB3  (2<<27)
 #define  TRANS_FSYNC_DELAY_HB4  (3<<27)
-#define  TRANS_DP_AUDIO_ONLY    (1<<26)
-#define  TRANS_DP_VIDEO_AUDIO   (0<<26)
 #define  TRANS_INTERLACE_MASK   (7<<21)
 #define  TRANS_PROGRESSIVE      (0<<21)
 #define  TRANS_INTERLACED       (3<<21)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9293878..71a5eba 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -776,7 +776,7 @@
 
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
 	else
 		crt->base.get_hw_state = intel_crt_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4bad0f7..2e904a5 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -84,7 +84,8 @@
  * in either FDI or DP modes only, as HDMI connections will work with both
  * of those
  */
-void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port, bool use_fdi_mode)
+static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port,
+				      bool use_fdi_mode)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg;
@@ -114,16 +115,17 @@
 {
 	int port;
 
-	if (IS_HASWELL(dev)) {
-		for (port = PORT_A; port < PORT_E; port++)
-			intel_prepare_ddi_buffers(dev, port, false);
+	if (!HAS_DDI(dev))
+		return;
 
-		/* DDI E is the suggested one to work in FDI mode, so program is as such by
-		 * default. It will have to be re-programmed in case a digital DP output
-		 * will be detected on it
-		 */
-		intel_prepare_ddi_buffers(dev, PORT_E, true);
-	}
+	for (port = PORT_A; port < PORT_E; port++)
+		intel_prepare_ddi_buffers(dev, port, false);
+
+	/* DDI E is the suggested one to work in FDI mode, so program is as such
+	 * by default. It will have to be re-programmed in case a digital DP
+	 * output will be detected on it
+	 */
+	intel_prepare_ddi_buffers(dev, PORT_E, true);
 }
 
 static const long hsw_ddi_buf_ctl_values[] = {
@@ -1069,7 +1071,7 @@
 	if (port == PORT_A)
 		cpu_transcoder = TRANSCODER_EDP;
 	else
-		cpu_transcoder = pipe;
+		cpu_transcoder = (enum transcoder) pipe;
 
 	tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a9fb046..8c36a11 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -416,13 +416,11 @@
 
 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
 {
-	unsigned long flags;
-	u32 val = 0;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 		DRM_ERROR("DPIO idle wait timed out\n");
-		goto out_unlock;
+		return 0;
 	}
 
 	I915_WRITE(DPIO_REG, reg);
@@ -430,24 +428,20 @@
 		   DPIO_BYTE);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 		DRM_ERROR("DPIO read wait timed out\n");
-		goto out_unlock;
+		return 0;
 	}
-	val = I915_READ(DPIO_DATA);
 
-out_unlock:
-	spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
-	return val;
+	return I915_READ(DPIO_DATA);
 }
 
 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
 			     u32 val)
 {
-	unsigned long flags;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
 		DRM_ERROR("DPIO idle wait timed out\n");
-		goto out_unlock;
+		return;
 	}
 
 	I915_WRITE(DPIO_DATA, val);
@@ -456,9 +450,6 @@
 		   DPIO_BYTE);
 	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
 		DRM_ERROR("DPIO write wait timed out\n");
-
-out_unlock:
-       spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
 }
 
 static void vlv_init_dpio(struct drm_device *dev)
@@ -472,61 +463,14 @@
 	POSTING_READ(DPIO_CTL);
 }
 
-static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
-{
-	DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
-	return 1;
-}
-
-static const struct dmi_system_id intel_dual_link_lvds[] = {
-	{
-		.callback = intel_dual_link_lvds_callback,
-		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
-		},
-	},
-	{ }	/* terminating entry */
-};
-
-static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
-			      unsigned int reg)
-{
-	unsigned int val;
-
-	/* use the module option value if specified */
-	if (i915_lvds_channel_mode > 0)
-		return i915_lvds_channel_mode == 2;
-
-	if (dmi_check_system(intel_dual_link_lvds))
-		return true;
-
-	if (dev_priv->lvds_val)
-		val = dev_priv->lvds_val;
-	else {
-		/* BIOS should set the proper LVDS register value at boot, but
-		 * in reality, it doesn't set the value when the lid is closed;
-		 * we need to check "the value to be set" in VBT when LVDS
-		 * register is uninitialized.
-		 */
-		val = I915_READ(reg);
-		if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
-			val = dev_priv->bios_lvds_val;
-		dev_priv->lvds_val = val;
-	}
-	return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
-}
-
 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 						int refclk)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	const intel_limit_t *limit;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
+		if (intel_is_dual_link_lvds(dev)) {
 			/* LVDS dual channel */
 			if (refclk == 100000)
 				limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -550,11 +494,10 @@
 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	const intel_limit_t *limit;
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		if (is_dual_link_lvds(dev_priv, LVDS))
+		if (intel_is_dual_link_lvds(dev))
 			/* LVDS with dual channel */
 			limit = &intel_limits_g4x_dual_channel_lvds;
 		else
@@ -686,19 +629,16 @@
 
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	intel_clock_t clock;
 	int err = target;
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
-	    (I915_READ(LVDS)) != 0) {
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 		/*
-		 * For LVDS, if the panel is on, just rely on its current
-		 * settings for dual-channel.  We haven't figured out how to
-		 * reliably set up different single/dual channel state, if we
-		 * even can.
+		 * For LVDS just rely on its current settings for dual-channel.
+		 * We haven't figured out how to reliably set up different
+		 * single/dual channel state, if we even can.
 		 */
-		if (is_dual_link_lvds(dev_priv, LVDS))
+		if (intel_is_dual_link_lvds(dev))
 			clock.p2 = limit->p2.p2_fast;
 		else
 			clock.p2 = limit->p2.p2_slow;
@@ -751,7 +691,6 @@
 			intel_clock_t *best_clock)
 {
 	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	intel_clock_t clock;
 	int max_n;
 	bool found;
@@ -766,8 +705,7 @@
 			lvds_reg = PCH_LVDS;
 		else
 			lvds_reg = LVDS;
-		if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
-		    LVDS_CLKB_POWER_UP)
+		if (intel_is_dual_link_lvds(dev))
 			clock.p2 = limit->p2.p2_fast;
 		else
 			clock.p2 = limit->p2.p2_slow;
@@ -1047,6 +985,51 @@
 	}
 }
 
+/*
+ * ibx_digital_port_connected - is the specified port connected?
+ * @dev_priv: i915 private structure
+ * @port: the port to test
+ *
+ * Returns true if @port is connected, false otherwise.
+ */
+bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
+				struct intel_digital_port *port)
+{
+	u32 bit;
+
+	if (HAS_PCH_IBX(dev_priv->dev)) {
+		switch(port->port) {
+		case PORT_B:
+			bit = SDE_PORTB_HOTPLUG;
+			break;
+		case PORT_C:
+			bit = SDE_PORTC_HOTPLUG;
+			break;
+		case PORT_D:
+			bit = SDE_PORTD_HOTPLUG;
+			break;
+		default:
+			return true;
+		}
+	} else {
+		switch(port->port) {
+		case PORT_B:
+			bit = SDE_PORTB_HOTPLUG_CPT;
+			break;
+		case PORT_C:
+			bit = SDE_PORTC_HOTPLUG_CPT;
+			break;
+		case PORT_D:
+			bit = SDE_PORTD_HOTPLUG_CPT;
+			break;
+		default:
+			return true;
+		}
+	}
+
+	return I915_READ(SDEISR) & bit;
+}
+
 static const char *state_string(bool enabled)
 {
 	return enabled ? "on" : "off";
@@ -1125,8 +1108,8 @@
 	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 								      pipe);
 
-	if (IS_HASWELL(dev_priv->dev)) {
-		/* On Haswell, DDI is used instead of FDI_TX_CTL */
+	if (HAS_DDI(dev_priv->dev)) {
+		/* DDI does not have a specific FDI_TX register */
 		reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
 		val = I915_READ(reg);
 		cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
@@ -1170,7 +1153,7 @@
 		return;
 
 	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
-	if (IS_HASWELL(dev_priv->dev))
+	if (HAS_DDI(dev_priv->dev))
 		return;
 
 	reg = FDI_TX_CTL(pipe);
@@ -1509,13 +1492,14 @@
 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
 		enum intel_sbi_destination destination)
 {
-	unsigned long flags;
 	u32 tmp;
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
-	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0, 100)) {
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
+				100)) {
 		DRM_ERROR("timeout waiting for SBI to become ready\n");
-		goto out_unlock;
+		return;
 	}
 
 	I915_WRITE(SBI_ADDR, (reg << 16));
@@ -1530,24 +1514,21 @@
 	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
 				100)) {
 		DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
-		goto out_unlock;
+		return;
 	}
-
-out_unlock:
-	spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
 }
 
 static u32
 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
 	       enum intel_sbi_destination destination)
 {
-	unsigned long flags;
 	u32 value = 0;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
 
-	spin_lock_irqsave(&dev_priv->dpio_lock, flags);
-	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0, 100)) {
+	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
+				100)) {
 		DRM_ERROR("timeout waiting for SBI to become ready\n");
-		goto out_unlock;
+		return 0;
 	}
 
 	I915_WRITE(SBI_ADDR, (reg << 16));
@@ -1561,14 +1542,10 @@
 	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
 				100)) {
 		DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
-		goto out_unlock;
+		return 0;
 	}
 
-	value = I915_READ(SBI_DATA);
-
-out_unlock:
-	spin_unlock_irqrestore(&dev_priv->dpio_lock, flags);
-	return value;
+	return I915_READ(SBI_DATA);
 }
 
 /**
@@ -1700,8 +1677,8 @@
 		 * make the BPC in transcoder be consistent with
 		 * that in pipeconf reg.
 		 */
-		val &= ~PIPE_BPC_MASK;
-		val |= pipeconf_val & PIPE_BPC_MASK;
+		val &= ~PIPECONF_BPC_MASK;
+		val |= pipeconf_val & PIPECONF_BPC_MASK;
 	}
 
 	val &= ~TRANS_INTERLACE_MASK;
@@ -1728,7 +1705,7 @@
 	BUG_ON(dev_priv->info->gen < 5);
 
 	/* FDI must be feeding us bits for PCH ports */
-	assert_fdi_tx_enabled(dev_priv, cpu_transcoder);
+	assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
 	assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
 
 	/* Workaround: set timing override bit. */
@@ -1816,11 +1793,11 @@
 {
 	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 								      pipe);
-	enum transcoder pch_transcoder;
+	enum pipe pch_transcoder;
 	int reg;
 	u32 val;
 
-	if (IS_HASWELL(dev_priv->dev))
+	if (HAS_PCH_LPT(dev_priv->dev))
 		pch_transcoder = TRANSCODER_A;
 	else
 		pch_transcoder = pipe;
@@ -1836,7 +1813,8 @@
 		if (pch_port) {
 			/* if driving the PCH, we need FDI enabled */
 			assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
-			assert_fdi_tx_pll_enabled(dev_priv, cpu_transcoder);
+			assert_fdi_tx_pll_enabled(dev_priv,
+						  (enum pipe) cpu_transcoder);
 		}
 		/* FIXME: assert CPU port conditions for SNB+ */
 	}
@@ -2350,43 +2328,6 @@
 	return 0;
 }
 
-static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 dpa_ctl;
-
-	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
-	dpa_ctl = I915_READ(DP_A);
-	dpa_ctl &= ~DP_PLL_FREQ_MASK;
-
-	if (clock < 200000) {
-		u32 temp;
-		dpa_ctl |= DP_PLL_FREQ_160MHZ;
-		/* workaround for 160Mhz:
-		   1) program 0x4600c bits 15:0 = 0x8124
-		   2) program 0x46010 bit 0 = 1
-		   3) program 0x46034 bit 24 = 1
-		   4) program 0x64000 bit 14 = 1
-		   */
-		temp = I915_READ(0x4600c);
-		temp &= 0xffff0000;
-		I915_WRITE(0x4600c, temp | 0x8124);
-
-		temp = I915_READ(0x46010);
-		I915_WRITE(0x46010, temp | 1);
-
-		temp = I915_READ(0x46034);
-		I915_WRITE(0x46034, temp | (1 << 24));
-	} else {
-		dpa_ctl |= DP_PLL_FREQ_270MHZ;
-	}
-	I915_WRITE(DP_A, dpa_ctl);
-
-	POSTING_READ(DP_A);
-	udelay(500);
-}
-
 static void intel_fdi_normal_train(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -2815,7 +2756,7 @@
 	temp = I915_READ(reg);
 	temp &= ~((0x7 << 19) | (0x7 << 16));
 	temp |= (intel_crtc->fdi_lanes - 1) << 19;
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
 
 	POSTING_READ(reg);
@@ -2828,18 +2769,14 @@
 	POSTING_READ(reg);
 	udelay(200);
 
-	/* On Haswell, the PLL configuration for ports and pipes is handled
-	 * separately, as part of DDI setup */
-	if (!IS_HASWELL(dev)) {
-		/* Enable CPU FDI TX PLL, always on for Ironlake */
-		reg = FDI_TX_CTL(pipe);
-		temp = I915_READ(reg);
-		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
-			I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+	/* Enable CPU FDI TX PLL, always on for Ironlake */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
 
-			POSTING_READ(reg);
-			udelay(100);
-		}
+		POSTING_READ(reg);
+		udelay(100);
 	}
 }
 
@@ -2889,7 +2826,7 @@
 	reg = FDI_RX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~(0x7 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
 
 	POSTING_READ(reg);
@@ -2918,7 +2855,7 @@
 	}
 	/* BPC in FDI rx is consistent with that in PIPECONF */
 	temp &= ~(0x07 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp);
 
 	POSTING_READ(reg);
@@ -2992,6 +2929,8 @@
 	u32 divsel, phaseinc, auxdiv, phasedir = 0;
 	u32 temp;
 
+	mutex_lock(&dev_priv->dpio_lock);
+
 	/* It is necessary to ungate the pixclk gate prior to programming
 	 * the divisors, and gate it back when it is done.
 	 */
@@ -3066,6 +3005,8 @@
 	udelay(24);
 
 	I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
+
+	mutex_unlock(&dev_priv->dpio_lock);
 }
 
 /*
@@ -3146,7 +3087,7 @@
 	if (HAS_PCH_CPT(dev) &&
 	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
-		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
 		temp &= ~(TRANS_DP_PORT_SEL_MASK |
@@ -3623,7 +3564,7 @@
 
 	/* Stop saying we're using TRANSCODER_EDP because some other CRTC might
 	 * start using it. */
-	intel_crtc->cpu_transcoder = intel_crtc->pipe;
+	intel_crtc->cpu_transcoder = (enum transcoder) intel_crtc->pipe;
 
 	intel_ddi_put_crtc_pll(crtc);
 }
@@ -4012,16 +3953,8 @@
 	return 133000;
 }
 
-struct fdi_m_n {
-	u32        tu;
-	u32        gmch_m;
-	u32        gmch_n;
-	u32        link_m;
-	u32        link_n;
-};
-
 static void
-fdi_reduce_ratio(u32 *num, u32 *den)
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
 {
 	while (*num > 0xffffff || *den > 0xffffff) {
 		*num >>= 1;
@@ -4029,20 +3962,18 @@
 	}
 }
 
-static void
-ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
-		     int link_clock, struct fdi_m_n *m_n)
+void
+intel_link_compute_m_n(int bits_per_pixel, int nlanes,
+		       int pixel_clock, int link_clock,
+		       struct intel_link_m_n *m_n)
 {
-	m_n->tu = 64; /* default size */
-
-	/* BUG_ON(pixel_clock > INT_MAX / 36); */
+	m_n->tu = 64;
 	m_n->gmch_m = bits_per_pixel * pixel_clock;
 	m_n->gmch_n = link_clock * nlanes * 8;
-	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
-
+	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 	m_n->link_m = pixel_clock;
 	m_n->link_n = link_clock;
-	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
+	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
 }
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
@@ -4289,51 +4220,6 @@
 	}
 }
 
-static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
-			      struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int pipe = intel_crtc->pipe;
-	u32 temp;
-
-	temp = I915_READ(LVDS);
-	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-	if (pipe == 1) {
-		temp |= LVDS_PIPEB_SELECT;
-	} else {
-		temp &= ~LVDS_PIPEB_SELECT;
-	}
-	/* set the corresponsding LVDS_BORDER bit */
-	temp |= dev_priv->lvds_border_bits;
-	/* Set the B0-B3 data pairs corresponding to whether we're going to
-	 * set the DPLLs for dual-channel mode or not.
-	 */
-	if (clock->p2 == 7)
-		temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-	else
-		temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
-	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
-	 * appropriately here, but we need to look more thoroughly into how
-	 * panels behave in the two modes.
-	 */
-	/* set the dithering flag on LVDS as needed */
-	if (INTEL_INFO(dev)->gen >= 4) {
-		if (dev_priv->lvds_dither)
-			temp |= LVDS_ENABLE_DITHER;
-		else
-			temp &= ~LVDS_ENABLE_DITHER;
-	}
-	temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-	if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-		temp |= LVDS_HSYNC_POLARITY;
-	if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-		temp |= LVDS_VSYNC_POLARITY;
-	I915_WRITE(LVDS, temp);
-}
-
 static void vlv_update_pll(struct drm_crtc *crtc,
 			   struct drm_display_mode *mode,
 			   struct drm_display_mode *adjusted_mode,
@@ -4349,6 +4235,8 @@
 	bool is_sdvo;
 	u32 temp;
 
+	mutex_lock(&dev_priv->dpio_lock);
+
 	is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
 		intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
 
@@ -4432,6 +4320,8 @@
 			temp |= (1 << 21);
 		intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
 	}
+
+	mutex_unlock(&dev_priv->dpio_lock);
 }
 
 static void i9xx_update_pll(struct drm_crtc *crtc,
@@ -4443,6 +4333,7 @@
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
 	bool is_sdvo;
@@ -4511,12 +4402,9 @@
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
-	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
-	 * This is an exception to the general rule that mode_set doesn't turn
-	 * things on.
-	 */
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		intel_update_lvds(crtc, clock, adjusted_mode);
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
 
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
@@ -4555,6 +4443,7 @@
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
 
@@ -4588,12 +4477,9 @@
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
-	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
-	 * This is an exception to the general rule that mode_set doesn't turn
-	 * things on.
-	 */
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		intel_update_lvds(crtc, clock, adjusted_mode);
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
 
 	I915_WRITE(DPLL(pipe), dpll);
 
@@ -4783,10 +4669,10 @@
 	}
 
 	/* default to 8bpc */
-	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+	pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
 	if (is_dp) {
 		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_BPP_6 |
+			pipeconf |= PIPECONF_6BPC |
 				    PIPECONF_DITHER_EN |
 				    PIPECONF_DITHER_TYPE_SP;
 		}
@@ -4794,7 +4680,7 @@
 
 	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
 		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_BPP_6 |
+			pipeconf |= PIPECONF_6BPC |
 					PIPECONF_ENABLE |
 					I965_PIPECONF_ACTIVE;
 		}
@@ -5177,19 +5063,19 @@
 
 	val = I915_READ(PIPECONF(pipe));
 
-	val &= ~PIPE_BPC_MASK;
+	val &= ~PIPECONF_BPC_MASK;
 	switch (intel_crtc->bpp) {
 	case 18:
-		val |= PIPE_6BPC;
+		val |= PIPECONF_6BPC;
 		break;
 	case 24:
-		val |= PIPE_8BPC;
+		val |= PIPECONF_8BPC;
 		break;
 	case 30:
-		val |= PIPE_10BPC;
+		val |= PIPECONF_10BPC;
 		break;
 	case 36:
-		val |= PIPE_12BPC;
+		val |= PIPECONF_12BPC;
 		break;
 	default:
 		/* Case prevented by intel_choose_pipe_bpp_dither. */
@@ -5400,7 +5286,7 @@
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 	struct intel_encoder *intel_encoder, *edp_encoder = NULL;
-	struct fdi_m_n m_n = {0};
+	struct intel_link_m_n m_n = {0};
 	int target_clock, pixel_multiplier, lane, link_bw;
 	bool is_dp = false, is_cpu_edp = false;
 
@@ -5452,8 +5338,7 @@
 
 	if (pixel_multiplier > 1)
 		link_bw *= pixel_multiplier;
-	ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
-			     &m_n);
+	intel_link_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, &m_n);
 
 	I915_WRITE(PIPE_DATA_M1(cpu_transcoder), TU_SIZE(m_n.tu) | m_n.gmch_m);
 	I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
@@ -5506,7 +5391,7 @@
 	if (is_lvds) {
 		if ((intel_panel_use_ssc(dev_priv) &&
 		     dev_priv->lvds_ssc_freq == 100) ||
-		    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+		    intel_is_dual_link_lvds(dev))
 			factor = 25;
 	} else if (is_sdvo && is_tv)
 		factor = 20;
@@ -5581,7 +5466,6 @@
 	bool ok, has_reduced_clock = false;
 	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
 	struct intel_encoder *encoder;
-	u32 temp;
 	int ret;
 	bool dither, fdi_config_ok;
 
@@ -5645,54 +5529,12 @@
 	} else
 		intel_put_pch_pll(intel_crtc);
 
-	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
-	 * This is an exception to the general rule that mode_set doesn't turn
-	 * things on.
-	 */
-	if (is_lvds) {
-		temp = I915_READ(PCH_LVDS);
-		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-		if (HAS_PCH_CPT(dev)) {
-			temp &= ~PORT_TRANS_SEL_MASK;
-			temp |= PORT_TRANS_SEL_CPT(pipe);
-		} else {
-			if (pipe == 1)
-				temp |= LVDS_PIPEB_SELECT;
-			else
-				temp &= ~LVDS_PIPEB_SELECT;
-		}
-
-		/* set the corresponsding LVDS_BORDER bit */
-		temp |= dev_priv->lvds_border_bits;
-		/* Set the B0-B3 data pairs corresponding to whether we're going to
-		 * set the DPLLs for dual-channel mode or not.
-		 */
-		if (clock.p2 == 7)
-			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-		else
-			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
-		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
-		 * appropriately here, but we need to look more thoroughly into how
-		 * panels behave in the two modes.
-		 */
-		temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-			temp |= LVDS_HSYNC_POLARITY;
-		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-			temp |= LVDS_VSYNC_POLARITY;
-		I915_WRITE(PCH_LVDS, temp);
-	}
-
-	if (is_dp && !is_cpu_edp) {
+	if (is_dp && !is_cpu_edp)
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
-	} else {
-		/* For non-DP output, clear any trans DP clock recovery setting.*/
-		I915_WRITE(TRANSDATA_M1(pipe), 0);
-		I915_WRITE(TRANSDATA_N1(pipe), 0);
-		I915_WRITE(TRANSDPLINK_M1(pipe), 0);
-		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
-	}
+
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
 
 	if (intel_crtc->pch_pll) {
 		I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
@@ -5727,9 +5569,6 @@
 
 	fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc);
 
-	if (is_cpu_edp)
-		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-
 	ironlake_set_pipeconf(crtc, adjusted_mode, dither);
 
 	intel_wait_for_vblank(dev, pipe);
@@ -5759,20 +5598,13 @@
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int num_connectors = 0;
-	intel_clock_t clock, reduced_clock;
-	u32 dpll = 0, fp = 0, fp2 = 0;
-	bool ok, has_reduced_clock = false;
-	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+	bool is_dp = false, is_cpu_edp = false;
 	struct intel_encoder *encoder;
-	u32 temp;
 	int ret;
 	bool dither;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		switch (encoder->type) {
-		case INTEL_OUTPUT_LVDS:
-			is_lvds = true;
-			break;
 		case INTEL_OUTPUT_DISPLAYPORT:
 			is_dp = true;
 			break;
@@ -5806,143 +5638,26 @@
 	if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
 		return -EINVAL;
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
-					     &has_reduced_clock,
-					     &reduced_clock);
-		if (!ok) {
-			DRM_ERROR("Couldn't find PLL settings for mode!\n");
-			return -EINVAL;
-		}
-	}
-
 	/* Ensure that the cursor is valid for the new mode before changing... */
 	intel_crtc_update_cursor(crtc, true);
 
 	/* determine panel color depth */
 	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
 					      adjusted_mode);
-	if (is_lvds && dev_priv->lvds_dither)
-		dither = true;
 
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-		if (has_reduced_clock)
-			fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
-			      reduced_clock.m2;
-
-		dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
-					     fp);
-
-		/* CPU eDP is the only output that doesn't need a PCH PLL of its
-		 * own on pre-Haswell/LPT generation */
-		if (!is_cpu_edp) {
-			struct intel_pch_pll *pll;
-
-			pll = intel_get_pch_pll(intel_crtc, dpll, fp);
-			if (pll == NULL) {
-				DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
-						 pipe);
-				return -EINVAL;
-			}
-		} else
-			intel_put_pch_pll(intel_crtc);
-
-		/* The LVDS pin pair needs to be on before the DPLLs are
-		 * enabled.  This is an exception to the general rule that
-		 * mode_set doesn't turn things on.
-		 */
-		if (is_lvds) {
-			temp = I915_READ(PCH_LVDS);
-			temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-			if (HAS_PCH_CPT(dev)) {
-				temp &= ~PORT_TRANS_SEL_MASK;
-				temp |= PORT_TRANS_SEL_CPT(pipe);
-			} else {
-				if (pipe == 1)
-					temp |= LVDS_PIPEB_SELECT;
-				else
-					temp &= ~LVDS_PIPEB_SELECT;
-			}
-
-			/* set the corresponsding LVDS_BORDER bit */
-			temp |= dev_priv->lvds_border_bits;
-			/* Set the B0-B3 data pairs corresponding to whether
-			 * we're going to set the DPLLs for dual-channel mode or
-			 * not.
-			 */
-			if (clock.p2 == 7)
-				temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-			else
-				temp &= ~(LVDS_B0B3_POWER_UP |
-					  LVDS_CLKB_POWER_UP);
-
-			/* It would be nice to set 24 vs 18-bit mode
-			 * (LVDS_A3_POWER_UP) appropriately here, but we need to
-			 * look more thoroughly into how panels behave in the
-			 * two modes.
-			 */
-			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-			if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-				temp |= LVDS_HSYNC_POLARITY;
-			if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-				temp |= LVDS_VSYNC_POLARITY;
-			I915_WRITE(PCH_LVDS, temp);
-		}
-	}
-
-	if (is_dp && !is_cpu_edp) {
+	if (is_dp && !is_cpu_edp)
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
-	} else {
-		if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-			/* For non-DP output, clear any trans DP clock recovery
-			 * setting.*/
-			I915_WRITE(TRANSDATA_M1(pipe), 0);
-			I915_WRITE(TRANSDATA_N1(pipe), 0);
-			I915_WRITE(TRANSDPLINK_M1(pipe), 0);
-			I915_WRITE(TRANSDPLINK_N1(pipe), 0);
-		}
-	}
 
 	intel_crtc->lowfreq_avail = false;
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		if (intel_crtc->pch_pll) {
-			I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-
-			/* Wait for the clocks to stabilize. */
-			POSTING_READ(intel_crtc->pch_pll->pll_reg);
-			udelay(150);
-
-			/* The pixel multiplier can only be updated once the
-			 * DPLL is enabled and the clocks are stable.
-			 *
-			 * So write it again.
-			 */
-			I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-		}
-
-		if (intel_crtc->pch_pll) {
-			if (is_lvds && has_reduced_clock && i915_powersave) {
-				I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
-				intel_crtc->lowfreq_avail = true;
-			} else {
-				I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
-			}
-		}
-	}
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
 	if (!is_dp || is_cpu_edp)
 		ironlake_set_m_n(crtc, mode, adjusted_mode);
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
-		if (is_cpu_edp)
-			ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-
 	haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
 	/* Set up the display plane register */
@@ -6759,7 +6474,7 @@
 		return false;
 	}
 
-	if (!intel_set_mode(crtc, mode, 0, 0, fb)) {
+	if (intel_set_mode(crtc, mode, 0, 0, fb)) {
 		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
 		if (old->release_fb)
 			old->release_fb->funcs->destroy(old->release_fb);
@@ -7109,8 +6824,6 @@
 
 	obj = work->old_fb_obj;
 
-	atomic_clear_mask(1 << intel_crtc->plane,
-			  &obj->pending_flip.counter);
 	wake_up(&dev_priv->pending_flip_queue);
 
 	queue_work(dev_priv->wq, &work->work);
@@ -7474,10 +7187,6 @@
 
 	work->enable_stall_check = true;
 
-	/* Block clients from rendering to the new back buffer until
-	 * the flip occurs and the object is no longer visible.
-	 */
-	atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
 	atomic_inc(&intel_crtc->unpin_work_count);
 
 	ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
@@ -7494,7 +7203,6 @@
 
 cleanup_pending:
 	atomic_dec(&intel_crtc->unpin_work_count);
-	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
 	drm_gem_object_unreference(&work->old_fb_obj->base);
 	drm_gem_object_unreference(&obj->base);
 	mutex_unlock(&dev->struct_mutex);
@@ -7904,16 +7612,21 @@
 	}
 }
 
-bool intel_set_mode(struct drm_crtc *crtc,
-		    struct drm_display_mode *mode,
-		    int x, int y, struct drm_framebuffer *fb)
+int intel_set_mode(struct drm_crtc *crtc,
+		   struct drm_display_mode *mode,
+		   int x, int y, struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
+	struct drm_display_mode *adjusted_mode, *saved_mode, *saved_hwmode;
 	struct intel_crtc *intel_crtc;
 	unsigned disable_pipes, prepare_pipes, modeset_pipes;
-	bool ret = true;
+	int ret = 0;
+
+	saved_mode = kmalloc(2 * sizeof(*saved_mode), GFP_KERNEL);
+	if (!saved_mode)
+		return -ENOMEM;
+	saved_hwmode = saved_mode + 1;
 
 	intel_modeset_affected_pipes(crtc, &modeset_pipes,
 				     &prepare_pipes, &disable_pipes);
@@ -7924,8 +7637,8 @@
 	for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
 		intel_crtc_disable(&intel_crtc->base);
 
-	saved_hwmode = crtc->hwmode;
-	saved_mode = crtc->mode;
+	*saved_hwmode = crtc->hwmode;
+	*saved_mode = crtc->mode;
 
 	/* Hack: Because we don't (yet) support global modeset on multiple
 	 * crtcs, we don't keep track of the new mode for more than one crtc.
@@ -7936,7 +7649,8 @@
 	if (modeset_pipes) {
 		adjusted_mode = intel_modeset_adjusted_mode(crtc, mode);
 		if (IS_ERR(adjusted_mode)) {
-			return false;
+			ret = PTR_ERR(adjusted_mode);
+			goto out;
 		}
 	}
 
@@ -7962,11 +7676,11 @@
 	 * on the DPLL.
 	 */
 	for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
-		ret = !intel_crtc_mode_set(&intel_crtc->base,
-					   mode, adjusted_mode,
-					   x, y, fb);
-		if (!ret)
-		    goto done;
+		ret = intel_crtc_mode_set(&intel_crtc->base,
+					  mode, adjusted_mode,
+					  x, y, fb);
+		if (ret)
+			goto done;
 	}
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
@@ -7987,16 +7701,23 @@
 	/* FIXME: add subpixel order */
 done:
 	drm_mode_destroy(dev, adjusted_mode);
-	if (!ret && crtc->enabled) {
-		crtc->hwmode = saved_hwmode;
-		crtc->mode = saved_mode;
+	if (ret && crtc->enabled) {
+		crtc->hwmode = *saved_hwmode;
+		crtc->mode = *saved_mode;
 	} else {
 		intel_modeset_check_state(dev);
 	}
 
+out:
+	kfree(saved_mode);
 	return ret;
 }
 
+void intel_crtc_restore_mode(struct drm_crtc *crtc)
+{
+	intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
+}
+
 #undef for_each_intel_crtc_masked
 
 static void intel_set_config_free(struct intel_set_config *config)
@@ -8262,11 +7983,11 @@
 			drm_mode_debug_printmodeline(set->mode);
 		}
 
-		if (!intel_set_mode(set->crtc, set->mode,
-				    set->x, set->y, set->fb)) {
-			DRM_ERROR("failed to set mode on [CRTC:%d]\n",
-				  set->crtc->base.id);
-			ret = -EINVAL;
+		ret = intel_set_mode(set->crtc, set->mode,
+				     set->x, set->y, set->fb);
+		if (ret) {
+			DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n",
+				  set->crtc->base.id, ret);
 			goto fail;
 		}
 	} else if (config->fb_changed) {
@@ -8283,8 +8004,8 @@
 
 	/* Try to restore the config */
 	if (config->mode_changed &&
-	    !intel_set_mode(save_set.crtc, save_set.mode,
-			    save_set.x, save_set.y, save_set.fb))
+	    intel_set_mode(save_set.crtc, save_set.mode,
+			   save_set.x, save_set.y, save_set.fb))
 		DRM_ERROR("failed to restore config after modeset failure\n");
 
 out_config:
@@ -8303,7 +8024,7 @@
 
 static void intel_cpu_pll_init(struct drm_device *dev)
 {
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_ddi_pll_init(dev);
 }
 
@@ -8439,11 +8160,10 @@
 		I915_WRITE(PFIT_CONTROL, 0);
 	}
 
-	if (!(IS_HASWELL(dev) &&
-	      (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
+	if (!(HAS_DDI(dev) && (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
 		intel_crt_init(dev);
 
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		int found;
 
 		/* Haswell uses DDI functions to detect digital outputs */
@@ -8686,7 +8406,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	/* We always want a DPMS function */
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
@@ -8748,8 +8468,7 @@
 		} else if (IS_HASWELL(dev)) {
 			dev_priv->display.fdi_link_train = hsw_fdi_link_train;
 			dev_priv->display.write_eld = haswell_write_eld;
-		} else
-			dev_priv->display.update_wm = NULL;
+		}
 	} else if (IS_G4X(dev)) {
 		dev_priv->display.write_eld = g4x_write_eld;
 	}
@@ -8982,6 +8701,9 @@
 	/* Just disable it once at startup */
 	i915_disable_vga(dev);
 	intel_setup_outputs(dev);
+
+	/* Just in case the BIOS is doing something questionable. */
+	intel_disable_fbc(dev);
 }
 
 static void
@@ -9192,7 +8914,7 @@
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
 
-	if (IS_HASWELL(dev)) {
+	if (HAS_DDI(dev)) {
 		tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
 
 		if (tmp & TRANS_DDI_FUNC_ENABLE) {
@@ -9233,7 +8955,7 @@
 			      crtc->active ? "enabled" : "disabled");
 	}
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_ddi_setup_hw_pll_state(dev);
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
@@ -9284,9 +9006,7 @@
 
 	if (force_restore) {
 		for_each_pipe(pipe) {
-			crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
-			intel_set_mode(&crtc->base, &crtc->base.mode,
-				       crtc->base.x, crtc->base.y, crtc->base.fb);
+			intel_crtc_restore_mode(dev_priv->pipe_to_crtc_mapping[pipe]);
 		}
 
 		i915_redisable_vga(dev);
@@ -9350,6 +9070,8 @@
 	flush_scheduled_work();
 
 	drm_mode_config_cleanup(dev);
+
+	intel_cleanup_overlay(dev);
 }
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1b63d55..5f12eb2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -148,15 +148,6 @@
 	return max_link_bw;
 }
 
-static int
-intel_dp_link_clock(uint8_t link_bw)
-{
-	if (link_bw == DP_LINK_BW_2_7)
-		return 270000;
-	else
-		return 162000;
-}
-
 /*
  * The units on the numbers in the next two are... bizarre.  Examples will
  * make it clearer; this one parallels an example in the eDP spec.
@@ -191,7 +182,8 @@
 			  struct drm_display_mode *mode,
 			  bool adjust_mode)
 {
-	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+	int max_link_clock =
+		drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
 	int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
 	int max_rate, mode_rate;
 
@@ -330,6 +322,48 @@
 	}
 }
 
+static uint32_t
+intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t ch_ctl = intel_dp->output_reg + 0x10;
+	uint32_t status;
+	bool done;
+
+	if (IS_HASWELL(dev)) {
+		switch (intel_dig_port->port) {
+		case PORT_A:
+			ch_ctl = DPA_AUX_CH_CTL;
+			break;
+		case PORT_B:
+			ch_ctl = PCH_DPB_AUX_CH_CTL;
+			break;
+		case PORT_C:
+			ch_ctl = PCH_DPC_AUX_CH_CTL;
+			break;
+		case PORT_D:
+			ch_ctl = PCH_DPD_AUX_CH_CTL;
+			break;
+		default:
+			BUG();
+		}
+	}
+
+#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+	if (has_aux_irq)
+		done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+	else
+		done = wait_for_atomic(C, 10) == 0;
+	if (!done)
+		DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
+			  has_aux_irq);
+#undef C
+
+	return status;
+}
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		uint8_t *send, int send_bytes,
@@ -341,11 +375,17 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t ch_ctl = output_reg + 0x10;
 	uint32_t ch_data = ch_ctl + 4;
-	int i;
-	int recv_bytes;
+	int i, ret, recv_bytes;
 	uint32_t status;
 	uint32_t aux_clock_divider;
 	int try, precharge;
+	bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
+
+	/* dp aux is extremely sensitive to irq latency, hence request the
+	 * lowest possible wakeup latency and so prevent the cpu from going into
+	 * deep sleep states.
+	 */
+	pm_qos_update_request(&dev_priv->pm_qos, 0);
 
 	if (IS_HASWELL(dev)) {
 		switch (intel_dig_port->port) {
@@ -379,7 +419,7 @@
 	 * clock divider.
 	 */
 	if (is_cpu_edp(intel_dp)) {
-		if (IS_HASWELL(dev))
+		if (HAS_DDI(dev))
 			aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
 		else if (IS_VALLEYVIEW(dev))
 			aux_clock_divider = 100;
@@ -399,7 +439,7 @@
 
 	/* Try to wait for any previous AUX channel activity */
 	for (try = 0; try < 3; try++) {
-		status = I915_READ(ch_ctl);
+		status = I915_READ_NOTRACE(ch_ctl);
 		if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 			break;
 		msleep(1);
@@ -408,7 +448,8 @@
 	if (try == 3) {
 		WARN(1, "dp_aux_ch not started status 0x%08x\n",
 		     I915_READ(ch_ctl));
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out;
 	}
 
 	/* Must try at least 3 times according to DP spec */
@@ -421,6 +462,7 @@
 		/* Send the command and wait for it to complete */
 		I915_WRITE(ch_ctl,
 			   DP_AUX_CH_CTL_SEND_BUSY |
+			   (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
 			   DP_AUX_CH_CTL_TIME_OUT_400us |
 			   (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
 			   (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
@@ -428,12 +470,8 @@
 			   DP_AUX_CH_CTL_DONE |
 			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
 			   DP_AUX_CH_CTL_RECEIVE_ERROR);
-		for (;;) {
-			status = I915_READ(ch_ctl);
-			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
-				break;
-			udelay(100);
-		}
+
+		status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
 
 		/* Clear done status and any errors */
 		I915_WRITE(ch_ctl,
@@ -451,7 +489,8 @@
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
 		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out;
 	}
 
 	/* Check for timeout or receive error.
@@ -459,14 +498,16 @@
 	 */
 	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
 		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
-		return -EIO;
+		ret = -EIO;
+		goto out;
 	}
 
 	/* Timeouts occur when the device isn't connected, so they're
 	 * "normal" -- don't fill the kernel log with these */
 	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
 		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
-		return -ETIMEDOUT;
+		ret = -ETIMEDOUT;
+		goto out;
 	}
 
 	/* Unload any bytes sent back from the other side */
@@ -479,7 +520,11 @@
 		unpack_aux(I915_READ(ch_data + i),
 			   recv + i, recv_bytes - i);
 
-	return recv_bytes;
+	ret = recv_bytes;
+out:
+	pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
+
+	return ret;
 }
 
 /* Write data to the aux channel in native mode */
@@ -722,12 +767,15 @@
 
 	for (clock = 0; clock <= max_clock; clock++) {
 		for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
-			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
+			int link_bw_clock =
+				drm_dp_bw_code_to_link_rate(bws[clock]);
+			int link_avail = intel_dp_max_data_rate(link_bw_clock,
+								lane_count);
 
 			if (mode_rate <= link_avail) {
 				intel_dp->link_bw = bws[clock];
 				intel_dp->lane_count = lane_count;
-				adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+				adjusted_mode->clock = link_bw_clock;
 				DRM_DEBUG_KMS("DP link bw %02x lane "
 						"count %d clock %d bpp %d\n",
 				       intel_dp->link_bw, intel_dp->lane_count,
@@ -742,39 +790,6 @@
 	return false;
 }
 
-struct intel_dp_m_n {
-	uint32_t	tu;
-	uint32_t	gmch_m;
-	uint32_t	gmch_n;
-	uint32_t	link_m;
-	uint32_t	link_n;
-};
-
-static void
-intel_reduce_ratio(uint32_t *num, uint32_t *den)
-{
-	while (*num > 0xffffff || *den > 0xffffff) {
-		*num >>= 1;
-		*den >>= 1;
-	}
-}
-
-static void
-intel_dp_compute_m_n(int bpp,
-		     int nlanes,
-		     int pixel_clock,
-		     int link_clock,
-		     struct intel_dp_m_n *m_n)
-{
-	m_n->tu = 64;
-	m_n->gmch_m = (pixel_clock * bpp) >> 3;
-	m_n->gmch_n = link_clock * nlanes;
-	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
-	m_n->link_m = pixel_clock;
-	m_n->link_n = link_clock;
-	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
-}
-
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode)
@@ -785,7 +800,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int lane_count = 4;
-	struct intel_dp_m_n m_n;
+	struct intel_link_m_n m_n;
 	int pipe = intel_crtc->pipe;
 	enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
 
@@ -808,8 +823,8 @@
 	 * the number of bytes_per_pixel post-LUT, which we always
 	 * set up for 8-bits of R/G/B, or 3 bytes total.
 	 */
-	intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
-			     mode->clock, adjusted_mode->clock, &m_n);
+	intel_link_compute_m_n(intel_crtc->bpp, lane_count,
+			       mode->clock, adjusted_mode->clock, &m_n);
 
 	if (IS_HASWELL(dev)) {
 		I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
@@ -851,6 +866,32 @@
 	}
 }
 
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+	if (clock < 200000) {
+		/* For a long time we've carried around a ILK-DevA w/a for the
+		 * 160MHz clock. If we're really unlucky, it's still required.
+		 */
+		DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
+		dpa_ctl |= DP_PLL_FREQ_160MHZ;
+	} else {
+		dpa_ctl |= DP_PLL_FREQ_270MHZ;
+	}
+
+	I915_WRITE(DP_A, dpa_ctl);
+
+	POSTING_READ(DP_A);
+	udelay(500);
+}
+
 static void
 intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		  struct drm_display_mode *adjusted_mode)
@@ -950,6 +991,9 @@
 	} else {
 		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
 	}
+
+	if (is_cpu_edp(intel_dp))
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 }
 
 #define IDLE_ON_MASK		(PP_ON | 0 	  | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
@@ -1543,7 +1587,7 @@
 }
 
 static uint32_t
-intel_dp_signal_levels(uint8_t train_set)
+intel_gen4_signal_levels(uint8_t train_set)
 {
 	uint32_t	signal_levels = 0;
 
@@ -1641,7 +1685,7 @@
 
 /* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
 static uint32_t
-intel_dp_signal_levels_hsw(uint8_t train_set)
+intel_hsw_signal_levels(uint8_t train_set)
 {
 	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
 					 DP_TRAIN_PRE_EMPHASIS_MASK);
@@ -1673,6 +1717,34 @@
 	}
 }
 
+/* Properly updates "DP" with the correct signal levels. */
+static void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	uint32_t signal_levels, mask;
+	uint8_t train_set = intel_dp->train_set[0];
+
+	if (IS_HASWELL(dev)) {
+		signal_levels = intel_hsw_signal_levels(train_set);
+		mask = DDI_BUF_EMP_MASK;
+	} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+		signal_levels = intel_gen7_edp_signal_levels(train_set);
+		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+	} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+		signal_levels = intel_gen6_edp_signal_levels(train_set);
+		mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+	} else {
+		signal_levels = intel_gen4_signal_levels(train_set);
+		mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
+	}
+
+	DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
+
+	*DP = (*DP & ~mask) | signal_levels;
+}
+
 static bool
 intel_dp_set_link_train(struct intel_dp *intel_dp,
 			uint32_t dp_reg_value,
@@ -1791,7 +1863,7 @@
 	int voltage_tries, loop_tries;
 	uint32_t DP = intel_dp->DP;
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_ddi_prepare_link_retrain(encoder);
 
 	/* Write the link configuration data */
@@ -1809,24 +1881,8 @@
 	for (;;) {
 		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
 		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
-		uint32_t    signal_levels;
 
-		if (IS_HASWELL(dev)) {
-			signal_levels = intel_dp_signal_levels_hsw(
-							intel_dp->train_set[0]);
-			DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
-		} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
-			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
-		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
-			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
-		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
-		}
-		DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n",
-			      signal_levels);
+		intel_dp_set_signal_levels(intel_dp, &DP);
 
 		/* Set training pattern 1 */
 		if (!intel_dp_set_link_train(intel_dp, DP,
@@ -1882,7 +1938,6 @@
 void
 intel_dp_complete_link_train(struct intel_dp *intel_dp)
 {
-	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	bool channel_eq = false;
 	int tries, cr_tries;
 	uint32_t DP = intel_dp->DP;
@@ -1892,8 +1947,6 @@
 	cr_tries = 0;
 	channel_eq = false;
 	for (;;) {
-		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
-		uint32_t    signal_levels;
 		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 
 		if (cr_tries > 5) {
@@ -1902,19 +1955,7 @@
 			break;
 		}
 
-		if (IS_HASWELL(dev)) {
-			signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]);
-			DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
-		} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
-			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
-		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
-			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
-		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
-			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
-		}
+		intel_dp_set_signal_levels(intel_dp, &DP);
 
 		/* channel eq pattern */
 		if (!intel_dp_set_link_train(intel_dp, DP,
@@ -1964,6 +2005,8 @@
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(intel_dig_port->base.base.crtc);
 	uint32_t DP = intel_dp->DP;
 
 	/*
@@ -1981,7 +2024,7 @@
 	 *   intel_ddi_prepare_link_retrain will take care of redoing the link
 	 *   train.
 	 */
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		return;
 
 	if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
@@ -1998,7 +2041,8 @@
 	}
 	POSTING_READ(intel_dp->output_reg);
 
-	msleep(17);
+	/* We don't really know why we're doing this */
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	if (HAS_PCH_IBX(dev) &&
 	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -2018,19 +2062,14 @@
 		/* Changes to enable or select take place the vblank
 		 * after being written.
 		 */
-		if (crtc == NULL) {
-			/* We can arrive here never having been attached
-			 * to a CRTC, for instance, due to inheriting
-			 * random state from the BIOS.
-			 *
-			 * If the pipe is not running, play safe and
-			 * wait for the clocks to stabilise before
-			 * continuing.
-			 */
+		if (WARN_ON(crtc == NULL)) {
+			/* We should never try to disable a port without a crtc
+			 * attached. For paranoia keep the code around for a
+			 * bit. */
 			POSTING_READ(intel_dp->output_reg);
 			msleep(50);
 		} else
-			intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+			intel_wait_for_vblank(dev, intel_crtc->pipe);
 	}
 
 	DP &= ~DP_AUDIO_OUTPUT_ENABLE;
@@ -2042,10 +2081,16 @@
 static bool
 intel_dp_get_dpcd(struct intel_dp *intel_dp)
 {
+	char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
+
 	if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
 					   sizeof(intel_dp->dpcd)) == 0)
 		return false; /* aux transfer failed */
 
+	hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
+			   32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
+	DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+
 	if (intel_dp->dpcd[DP_DPCD_REV] == 0)
 		return false; /* DPCD not present */
 
@@ -2206,6 +2251,8 @@
 ironlake_dp_detect(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	enum drm_connector_status status;
 
 	/* Can't disconnect eDP, but you can close the lid... */
@@ -2216,6 +2263,9 @@
 		return status;
 	}
 
+	if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
+		return connector_status_disconnected;
+
 	return intel_dp_detect_dpcd(intel_dp);
 }
 
@@ -2290,13 +2340,6 @@
 	return intel_ddc_get_modes(connector, adapter);
 }
 
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
- *
- * \return true if DP port is connected.
- * \return false if DP port is disconnected.
- */
 static enum drm_connector_status
 intel_dp_detect(struct drm_connector *connector, bool force)
 {
@@ -2306,7 +2349,6 @@
 	struct drm_device *dev = connector->dev;
 	enum drm_connector_status status;
 	struct edid *edid = NULL;
-	char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
 
 	intel_dp->has_audio = false;
 
@@ -2315,10 +2357,6 @@
 	else
 		status = g4x_dp_detect(intel_dp);
 
-	hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
-			   32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
-	DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
-
 	if (status != connector_status_connected)
 		return status;
 
@@ -2445,11 +2483,8 @@
 	return -EINVAL;
 
 done:
-	if (intel_encoder->base.crtc) {
-		struct drm_crtc *crtc = intel_encoder->base.crtc;
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
-	}
+	if (intel_encoder->base.crtc)
+		intel_crtc_restore_mode(intel_encoder->base.crtc);
 
 	return 0;
 }
@@ -2742,7 +2777,7 @@
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	drm_sysfs_connector_add(connector);
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 8a1bd4a..54a034c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -153,6 +153,7 @@
 	bool cloneable;
 	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
+	void (*pre_pll_enable)(struct intel_encoder *);
 	void (*pre_enable)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
 	void (*disable)(struct intel_encoder *);
@@ -443,6 +444,7 @@
 extern void intel_mark_fb_busy(struct drm_i915_gem_object *obj);
 extern void intel_mark_fb_idle(struct drm_i915_gem_object *obj);
 extern bool intel_lvds_init(struct drm_device *dev);
+extern bool intel_is_dual_link_lvds(struct drm_device *dev);
 extern void intel_dp_init(struct drm_device *dev, int output_reg,
 			  enum port port);
 extern void intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
@@ -502,9 +504,10 @@
 	bool mode_changed;
 };
 
-extern bool intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
-			   int x, int y, struct drm_framebuffer *old_fb);
+extern int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
+			  int x, int y, struct drm_framebuffer *old_fb);
 extern void intel_modeset_disable(struct drm_device *dev);
+extern void intel_crtc_restore_mode(struct drm_crtc *crtc);
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_crtc_update_dpms(struct drm_crtc *crtc);
 extern void intel_encoder_noop(struct drm_encoder *encoder);
@@ -546,6 +549,9 @@
 	return container_of(intel_hdmi, struct intel_digital_port, hdmi);
 }
 
+bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
+				struct intel_digital_port *port);
+
 extern void intel_connector_attach_encoder(struct intel_connector *connector,
 					   struct intel_encoder *encoder);
 extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
@@ -589,6 +595,7 @@
 				  struct drm_mode_fb_cmd2 *mode_cmd,
 				  struct drm_i915_gem_object *obj);
 extern int intel_fbdev_init(struct drm_device *dev);
+extern void intel_fbdev_initial_config(struct drm_device *dev);
 extern void intel_fbdev_fini(struct drm_device *dev);
 extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
 extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 7b30b5c..71d5580 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -83,7 +83,9 @@
 
 	size = mode_cmd.pitches[0] * mode_cmd.height;
 	size = ALIGN(size, PAGE_SIZE);
-	obj = i915_gem_alloc_object(dev, size);
+	obj = i915_gem_object_create_stolen(dev, size);
+	if (obj == NULL)
+		obj = i915_gem_alloc_object(dev, size);
 	if (!obj) {
 		DRM_ERROR("failed to allocate framebuffer\n");
 		ret = -ENOMEM;
@@ -153,6 +155,13 @@
 	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
 	drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
 
+	/* If the object is shmemfs backed, it will have given us zeroed pages.
+	 * If the object is stolen however, it will be full of whatever
+	 * garbage was left in there.
+	 */
+	if (ifbdev->ifb.obj->stolen)
+		memset_io(info->screen_base, 0, info->screen_size);
+
 	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
 
 	DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08x, bo %p\n",
@@ -241,10 +250,18 @@
 	}
 
 	drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
-	drm_fb_helper_initial_config(&ifbdev->helper, 32);
+
 	return 0;
 }
 
+void intel_fbdev_initial_config(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	/* Due to peculiar init order wrt to hpd handling this is separate. */
+	drm_fb_helper_initial_config(&dev_priv->fbdev->helper, 32);
+}
+
 void intel_fbdev_fini(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2ee9821..6387f9b 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -48,7 +48,7 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t enabled_bits;
 
-	enabled_bits = IS_HASWELL(dev) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
+	enabled_bits = HAS_DDI(dev) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
 
 	WARN(I915_READ(intel_hdmi->sdvox_reg) & enabled_bits,
 	     "HDMI port enabled, expecting disabled\n");
@@ -793,16 +793,21 @@
 static enum drm_connector_status
 intel_hdmi_detect(struct drm_connector *connector, bool force)
 {
+	struct drm_device *dev = connector->dev;
 	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
 	struct intel_digital_port *intel_dig_port =
 		hdmi_to_dig_port(intel_hdmi);
 	struct intel_encoder *intel_encoder = &intel_dig_port->base;
-	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct edid *edid;
 	enum drm_connector_status status = connector_status_disconnected;
 
-	if (IS_G4X(connector->dev) && !g4x_hdmi_connected(intel_hdmi))
+
+	if (IS_G4X(dev) && !g4x_hdmi_connected(intel_hdmi))
 		return status;
+	else if (HAS_PCH_SPLIT(dev) &&
+		 !ibx_digital_port_connected(dev_priv, intel_dig_port))
+		 return status;
 
 	intel_hdmi->has_hdmi_sink = false;
 	intel_hdmi->has_audio = false;
@@ -912,11 +917,8 @@
 	return -EINVAL;
 
 done:
-	if (intel_dig_port->base.base.crtc) {
-		struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
-	}
+	if (intel_dig_port->base.base.crtc)
+		intel_crtc_restore_mode(intel_dig_port->base.base.crtc);
 
 	return 0;
 }
@@ -1013,7 +1015,7 @@
 		intel_hdmi->set_infoframes = cpt_set_infoframes;
 	}
 
-	if (IS_HASWELL(dev))
+	if (HAS_DDI(dev))
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 3ef5af1..7f09041 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -63,6 +63,7 @@
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0);
+	I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0);
 }
 
 static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
@@ -202,6 +203,68 @@
 	algo->data = bus;
 }
 
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4)
+static int
+gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
+		     u32 gmbus2_status,
+		     u32 gmbus4_irq_en)
+{
+	int i;
+	int reg_offset = dev_priv->gpio_mmio_base;
+	u32 gmbus2 = 0;
+	DEFINE_WAIT(wait);
+
+	/* Important: The hw handles only the first bit, so set only one! Since
+	 * we also need to check for NAKs besides the hw ready/idle signal, we
+	 * need to wake up periodically and check that ourselves. */
+	I915_WRITE(GMBUS4 + reg_offset, gmbus4_irq_en);
+
+	for (i = 0; i < msecs_to_jiffies(50) + 1; i++) {
+		prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait,
+				TASK_UNINTERRUPTIBLE);
+
+		gmbus2 = I915_READ_NOTRACE(GMBUS2 + reg_offset);
+		if (gmbus2 & (GMBUS_SATOER | gmbus2_status))
+			break;
+
+		schedule_timeout(1);
+	}
+	finish_wait(&dev_priv->gmbus_wait_queue, &wait);
+
+	I915_WRITE(GMBUS4 + reg_offset, 0);
+
+	if (gmbus2 & GMBUS_SATOER)
+		return -ENXIO;
+	if (gmbus2 & gmbus2_status)
+		return 0;
+	return -ETIMEDOUT;
+}
+
+static int
+gmbus_wait_idle(struct drm_i915_private *dev_priv)
+{
+	int ret;
+	int reg_offset = dev_priv->gpio_mmio_base;
+
+#define C ((I915_READ_NOTRACE(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0)
+
+	if (!HAS_GMBUS_IRQ(dev_priv->dev))
+		return wait_for(C, 10);
+
+	/* Important: The hw handles only the first bit, so set only one! */
+	I915_WRITE(GMBUS4 + reg_offset, GMBUS_IDLE_EN);
+
+	ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+
+	I915_WRITE(GMBUS4 + reg_offset, 0);
+
+	if (ret)
+		return 0;
+	else
+		return -ETIMEDOUT;
+#undef C
+}
+
 static int
 gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 		u32 gmbus1_index)
@@ -219,15 +282,11 @@
 	while (len) {
 		int ret;
 		u32 val, loop = 0;
-		u32 gmbus2;
 
-		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-			       (GMBUS_SATOER | GMBUS_HW_RDY),
-			       50);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY,
+					   GMBUS_HW_RDY_EN);
 		if (ret)
-			return -ETIMEDOUT;
-		if (gmbus2 & GMBUS_SATOER)
-			return -ENXIO;
+			return ret;
 
 		val = I915_READ(GMBUS3 + reg_offset);
 		do {
@@ -261,7 +320,6 @@
 		   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
 	while (len) {
 		int ret;
-		u32 gmbus2;
 
 		val = loop = 0;
 		do {
@@ -270,13 +328,10 @@
 
 		I915_WRITE(GMBUS3 + reg_offset, val);
 
-		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-			       (GMBUS_SATOER | GMBUS_HW_RDY),
-			       50);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY,
+					   GMBUS_HW_RDY_EN);
 		if (ret)
-			return -ETIMEDOUT;
-		if (gmbus2 & GMBUS_SATOER)
-			return -ENXIO;
+			return ret;
 	}
 	return 0;
 }
@@ -345,8 +400,6 @@
 	I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
 
 	for (i = 0; i < num; i++) {
-		u32 gmbus2;
-
 		if (gmbus_is_index_read(msgs, i, num)) {
 			ret = gmbus_xfer_index_read(dev_priv, &msgs[i]);
 			i += 1;  /* set i to the index of the read xfer */
@@ -361,13 +414,12 @@
 		if (ret == -ENXIO)
 			goto clear_err;
 
-		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
-			       (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
-			       50);
+		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_WAIT_PHASE,
+					   GMBUS_HW_WAIT_EN);
+		if (ret == -ENXIO)
+			goto clear_err;
 		if (ret)
 			goto timeout;
-		if (gmbus2 & GMBUS_SATOER)
-			goto clear_err;
 	}
 
 	/* Generate a STOP condition on the bus. Note that gmbus can't generata
@@ -380,8 +432,7 @@
 	 * We will re-enable it at the start of the next xfer,
 	 * till then let it sleep.
 	 */
-	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0,
-		     10)) {
+	if (gmbus_wait_idle(dev_priv)) {
 		DRM_DEBUG_KMS("GMBUS [%s] timed out waiting for idle\n",
 			 adapter->name);
 		ret = -ETIMEDOUT;
@@ -405,8 +456,7 @@
 	 * it's slow responding and only answers on the 2nd retry.
 	 */
 	ret = -ENXIO;
-	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0,
-		     10)) {
+	if (gmbus_wait_idle(dev_priv)) {
 		DRM_DEBUG_KMS("GMBUS [%s] timed out after NAK\n",
 			      adapter->name);
 		ret = -ETIMEDOUT;
@@ -469,6 +519,7 @@
 		dev_priv->gpio_mmio_base = 0;
 
 	mutex_init(&dev_priv->gmbus_mutex);
+	init_waitqueue_head(&dev_priv->gmbus_wait_queue);
 
 	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
 		struct intel_gmbus *bus = &dev_priv->gmbus[i];
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index b9a660a..8c61876 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -52,6 +52,8 @@
 	u32 pfit_control;
 	u32 pfit_pgm_ratios;
 	bool pfit_dirty;
+	bool is_dual_link;
+	u32 reg;
 
 	struct intel_lvds_connector *attached_connector;
 };
@@ -71,15 +73,10 @@
 {
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 lvds_reg, tmp;
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	u32 tmp;
 
-	if (HAS_PCH_SPLIT(dev)) {
-		lvds_reg = PCH_LVDS;
-	} else {
-		lvds_reg = LVDS;
-	}
-
-	tmp = I915_READ(lvds_reg);
+	tmp = I915_READ(lvds_encoder->reg);
 
 	if (!(tmp & LVDS_PORT_EN))
 		return false;
@@ -92,6 +89,68 @@
 	return true;
 }
 
+/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
+{
+	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct drm_display_mode *fixed_mode =
+		lvds_encoder->attached_connector->base.panel.fixed_mode;
+	int pipe = intel_crtc->pipe;
+	u32 temp;
+
+	temp = I915_READ(lvds_encoder->reg);
+	temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~PORT_TRANS_SEL_MASK;
+		temp |= PORT_TRANS_SEL_CPT(pipe);
+	} else {
+		if (pipe == 1) {
+			temp |= LVDS_PIPEB_SELECT;
+		} else {
+			temp &= ~LVDS_PIPEB_SELECT;
+		}
+	}
+
+	/* set the corresponsding LVDS_BORDER bit */
+	temp |= dev_priv->lvds_border_bits;
+	/* Set the B0-B3 data pairs corresponding to whether we're going to
+	 * set the DPLLs for dual-channel mode or not.
+	 */
+	if (lvds_encoder->is_dual_link)
+		temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+	else
+		temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+	 * appropriately here, but we need to look more thoroughly into how
+	 * panels behave in the two modes.
+	 */
+
+	/* Set the dithering flag on LVDS as needed, note that there is no
+	 * special lvds dither control bit on pch-split platforms, dithering is
+	 * only controlled through the PIPECONF reg. */
+	if (INTEL_INFO(dev)->gen == 4) {
+		if (dev_priv->lvds_dither)
+			temp |= LVDS_ENABLE_DITHER;
+		else
+			temp &= ~LVDS_ENABLE_DITHER;
+	}
+	temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+	if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC)
+		temp |= LVDS_HSYNC_POLARITY;
+	if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC)
+		temp |= LVDS_VSYNC_POLARITY;
+
+	I915_WRITE(lvds_encoder->reg, temp);
+}
+
 /**
  * Sets the power state for the panel.
  */
@@ -101,19 +160,17 @@
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 ctl_reg, lvds_reg, stat_reg;
+	u32 ctl_reg, stat_reg;
 
 	if (HAS_PCH_SPLIT(dev)) {
 		ctl_reg = PCH_PP_CONTROL;
-		lvds_reg = PCH_LVDS;
 		stat_reg = PCH_PP_STATUS;
 	} else {
 		ctl_reg = PP_CONTROL;
-		lvds_reg = LVDS;
 		stat_reg = PP_STATUS;
 	}
 
-	I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
+	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
 
 	if (lvds_encoder->pfit_dirty) {
 		/*
@@ -132,7 +189,7 @@
 	}
 
 	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
-	POSTING_READ(lvds_reg);
+	POSTING_READ(lvds_encoder->reg);
 	if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
 		DRM_ERROR("timed out waiting for panel to power on\n");
 
@@ -144,15 +201,13 @@
 	struct drm_device *dev = encoder->base.dev;
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 ctl_reg, lvds_reg, stat_reg;
+	u32 ctl_reg, stat_reg;
 
 	if (HAS_PCH_SPLIT(dev)) {
 		ctl_reg = PCH_PP_CONTROL;
-		lvds_reg = PCH_LVDS;
 		stat_reg = PCH_PP_STATUS;
 	} else {
 		ctl_reg = PP_CONTROL;
-		lvds_reg = LVDS;
 		stat_reg = PP_STATUS;
 	}
 
@@ -167,8 +222,8 @@
 		lvds_encoder->pfit_dirty = true;
 	}
 
-	I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
-	POSTING_READ(lvds_reg);
+	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
+	POSTING_READ(lvds_encoder->reg);
 }
 
 static int intel_lvds_mode_valid(struct drm_connector *connector,
@@ -591,8 +646,7 @@
 			 * If the CRTC is enabled, the display will be changed
 			 * according to the new panel fitting mode.
 			 */
-			intel_set_mode(crtc, &crtc->mode,
-				       crtc->x, crtc->y, crtc->fb);
+			intel_crtc_restore_mode(crtc);
 		}
 	}
 
@@ -903,6 +957,66 @@
 	return false;
 }
 
+static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
+{
+	DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_dual_link_lvds[] = {
+	{
+		.callback = intel_dual_link_lvds_callback,
+		.ident = "Apple MacBook Pro (Core i5/i7 Series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
+		},
+	},
+	{ }	/* terminating entry */
+};
+
+bool intel_is_dual_link_lvds(struct drm_device *dev)
+{
+	struct intel_encoder *encoder;
+	struct intel_lvds_encoder *lvds_encoder;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
+			    base.head) {
+		if (encoder->type == INTEL_OUTPUT_LVDS) {
+			lvds_encoder = to_lvds_encoder(&encoder->base);
+
+			return lvds_encoder->is_dual_link;
+		}
+	}
+
+	return false;
+}
+
+static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
+{
+	struct drm_device *dev = lvds_encoder->base.base.dev;
+	unsigned int val;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* use the module option value if specified */
+	if (i915_lvds_channel_mode > 0)
+		return i915_lvds_channel_mode == 2;
+
+	if (dmi_check_system(intel_dual_link_lvds))
+		return true;
+
+	/* BIOS should set the proper LVDS register value at boot, but
+	 * in reality, it doesn't set the value when the lid is closed;
+	 * we need to check "the value to be set" in VBT when LVDS
+	 * register is uninitialized.
+	 */
+	val = I915_READ(lvds_encoder->reg);
+	if (!(val & ~(LVDS_PIPE_MASK | LVDS_DETECTED)))
+		val = dev_priv->bios_lvds_val;
+
+	return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
+}
+
 static bool intel_lvds_supported(struct drm_device *dev)
 {
 	/* With the introduction of the PCH we gained a dedicated
@@ -988,6 +1102,7 @@
 			 DRM_MODE_ENCODER_LVDS);
 
 	intel_encoder->enable = intel_enable_lvds;
+	intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds;
 	intel_encoder->disable = intel_disable_lvds;
 	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
@@ -1009,6 +1124,12 @@
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 
+	if (HAS_PCH_SPLIT(dev)) {
+		lvds_encoder->reg = PCH_LVDS;
+	} else {
+		lvds_encoder->reg = LVDS;
+	}
+
 	/* create the scaling mode property */
 	drm_mode_create_scaling_mode_property(dev);
 	drm_object_attach_property(&connector->base,
@@ -1109,6 +1230,10 @@
 		goto failed;
 
 out:
+	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
+	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
+		      lvds_encoder->is_dual_link ? "dual" : "single");
+
 	/*
 	 * Unlock registers and just
 	 * leave them unlocked
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index b00f1c8..49249bb 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -28,7 +28,6 @@
 #include <linux/fb.h>
 #include <drm/drm_edid.h>
 #include <drm/drmP.h>
-#include <drm/drm_edid.h>
 #include "intel_drv.h"
 #include "i915_drv.h"
 
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index d7bc817..fabe0ac 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -1333,8 +1333,10 @@
 
 	overlay->dev = dev;
 
-	reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE);
-	if (!reg_bo)
+	reg_bo = i915_gem_object_create_stolen(dev, PAGE_SIZE);
+	if (reg_bo == NULL)
+		reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE);
+	if (reg_bo == NULL)
 		goto out_free;
 	overlay->reg_bo = reg_bo;
 
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e6f54ff..5a8a72c 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -440,12 +440,6 @@
 		dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
 		goto out_disable;
 	}
-	if (intel_fb->obj->base.size > dev_priv->cfb_size) {
-		DRM_DEBUG_KMS("framebuffer too large, disabling "
-			      "compression\n");
-		dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
-		goto out_disable;
-	}
 	if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
 	    (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
 		DRM_DEBUG_KMS("mode incompatible with compression, "
@@ -479,6 +473,14 @@
 	if (in_dbg_master())
 		goto out_disable;
 
+	if (i915_gem_stolen_setup_compression(dev, intel_fb->obj->base.size)) {
+		DRM_INFO("not enough stolen space for compressed buffer (need %zd bytes), disabling\n", intel_fb->obj->base.size);
+		DRM_INFO("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
+		DRM_DEBUG_KMS("framebuffer too large, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
+		goto out_disable;
+	}
+
 	/* If the scanout has not changed, don't modify the FBC settings.
 	 * Note that we make the fundamental assumption that the fb->obj
 	 * cannot be unpinned (and have its GTT offset and fence revoked)
@@ -526,6 +528,7 @@
 		DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
 		intel_disable_fbc(dev);
 	}
+	i915_gem_stolen_cleanup_compression(dev);
 }
 
 static void i915_pineview_get_mem_freq(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index ae253e0..59e0269 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -601,6 +601,13 @@
 	return 0;
 }
 
+static inline bool i915_gem_has_seqno_wrapped(struct drm_device *dev,
+					      u32 seqno)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->last_seqno < seqno;
+}
+
 /**
  * intel_ring_sync - sync the waiter to the signaller on seqno
  *
@@ -631,11 +638,20 @@
 	if (ret)
 		return ret;
 
-	intel_ring_emit(waiter,
-			dw1 | signaller->semaphore_register[waiter->id]);
-	intel_ring_emit(waiter, seqno);
-	intel_ring_emit(waiter, 0);
-	intel_ring_emit(waiter, MI_NOOP);
+	/* If seqno wrap happened, omit the wait with no-ops */
+	if (likely(!i915_gem_has_seqno_wrapped(waiter->dev, seqno))) {
+		intel_ring_emit(waiter,
+				dw1 |
+				signaller->semaphore_register[waiter->id]);
+		intel_ring_emit(waiter, seqno);
+		intel_ring_emit(waiter, 0);
+		intel_ring_emit(waiter, MI_NOOP);
+	} else {
+		intel_ring_emit(waiter, MI_NOOP);
+		intel_ring_emit(waiter, MI_NOOP);
+		intel_ring_emit(waiter, MI_NOOP);
+		intel_ring_emit(waiter, MI_NOOP);
+	}
 	intel_ring_advance(waiter);
 
 	return 0;
@@ -716,6 +732,12 @@
 	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
 }
 
+static void
+ring_set_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	intel_write_status_page(ring, I915_GEM_HWS_INDEX, seqno);
+}
+
 static u32
 pc_render_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 {
@@ -723,6 +745,13 @@
 	return pc->cpu_page[0];
 }
 
+static void
+pc_render_set_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	struct pipe_control *pc = ring->private;
+	pc->cpu_page[0] = seqno;
+}
+
 static bool
 gen5_ring_get_irq(struct intel_ring_buffer *ring)
 {
@@ -1152,7 +1181,11 @@
 			return ret;
 	}
 
-	obj = i915_gem_alloc_object(dev, ring->size);
+	obj = NULL;
+	if (!HAS_LLC(dev))
+		obj = i915_gem_object_create_stolen(dev, ring->size);
+	if (obj == NULL)
+		obj = i915_gem_alloc_object(dev, ring->size);
 	if (obj == NULL) {
 		DRM_ERROR("Failed to allocate ringbuffer\n");
 		ret = -ENOMEM;
@@ -1190,6 +1223,8 @@
 	if (IS_I830(ring->dev) || IS_845G(ring->dev))
 		ring->effective_size -= 128;
 
+	intel_ring_init_seqno(ring, dev_priv->last_seqno);
+
 	return 0;
 
 err_unmap:
@@ -1398,11 +1433,31 @@
 	return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
 }
 
+static int __intel_ring_begin(struct intel_ring_buffer *ring,
+			      int bytes)
+{
+	int ret;
+
+	if (unlikely(ring->tail + bytes > ring->effective_size)) {
+		ret = intel_wrap_ring_buffer(ring);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	if (unlikely(ring->space < bytes)) {
+		ret = ring_wait_for_space(ring, bytes);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	ring->space -= bytes;
+	return 0;
+}
+
 int intel_ring_begin(struct intel_ring_buffer *ring,
 		     int num_dwords)
 {
 	drm_i915_private_t *dev_priv = ring->dev->dev_private;
-	int n = 4*num_dwords;
 	int ret;
 
 	ret = i915_gem_check_wedge(dev_priv, dev_priv->mm.interruptible);
@@ -1414,20 +1469,21 @@
 	if (ret)
 		return ret;
 
-	if (unlikely(ring->tail + n > ring->effective_size)) {
-		ret = intel_wrap_ring_buffer(ring);
-		if (unlikely(ret))
-			return ret;
+	return __intel_ring_begin(ring, num_dwords * sizeof(uint32_t));
+}
+
+void intel_ring_init_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	struct drm_i915_private *dev_priv = ring->dev->dev_private;
+
+	BUG_ON(ring->outstanding_lazy_request);
+
+	if (INTEL_INFO(ring->dev)->gen >= 6) {
+		I915_WRITE(RING_SYNC_0(ring->mmio_base), 0);
+		I915_WRITE(RING_SYNC_1(ring->mmio_base), 0);
 	}
 
-	if (unlikely(ring->space < n)) {
-		ret = ring_wait_for_space(ring, n);
-		if (unlikely(ret))
-			return ret;
-	}
-
-	ring->space -= n;
-	return 0;
+	ring->set_seqno(ring, seqno);
 }
 
 void intel_ring_advance(struct intel_ring_buffer *ring)
@@ -1592,6 +1648,7 @@
 		ring->irq_put = gen6_ring_put_irq;
 		ring->irq_enable_mask = GT_USER_INTERRUPT;
 		ring->get_seqno = gen6_ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		ring->sync_to = gen6_ring_sync;
 		ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_INVALID;
 		ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_RV;
@@ -1602,6 +1659,7 @@
 		ring->add_request = pc_render_add_request;
 		ring->flush = gen4_render_ring_flush;
 		ring->get_seqno = pc_render_get_seqno;
+		ring->set_seqno = pc_render_set_seqno;
 		ring->irq_get = gen5_ring_get_irq;
 		ring->irq_put = gen5_ring_put_irq;
 		ring->irq_enable_mask = GT_USER_INTERRUPT | GT_PIPE_NOTIFY;
@@ -1612,6 +1670,7 @@
 		else
 			ring->flush = gen4_render_ring_flush;
 		ring->get_seqno = ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		if (IS_GEN2(dev)) {
 			ring->irq_get = i8xx_ring_get_irq;
 			ring->irq_put = i8xx_ring_put_irq;
@@ -1683,6 +1742,7 @@
 	else
 		ring->flush = gen4_render_ring_flush;
 	ring->get_seqno = ring_get_seqno;
+	ring->set_seqno = ring_set_seqno;
 	if (IS_GEN2(dev)) {
 		ring->irq_get = i8xx_ring_get_irq;
 		ring->irq_put = i8xx_ring_put_irq;
@@ -1743,6 +1803,7 @@
 		ring->flush = gen6_ring_flush;
 		ring->add_request = gen6_add_request;
 		ring->get_seqno = gen6_ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		ring->irq_enable_mask = GEN6_BSD_USER_INTERRUPT;
 		ring->irq_get = gen6_ring_get_irq;
 		ring->irq_put = gen6_ring_put_irq;
@@ -1758,6 +1819,7 @@
 		ring->flush = bsd_ring_flush;
 		ring->add_request = i9xx_add_request;
 		ring->get_seqno = ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
 		if (IS_GEN5(dev)) {
 			ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
 			ring->irq_get = gen5_ring_get_irq;
@@ -1787,6 +1849,7 @@
 	ring->flush = blt_ring_flush;
 	ring->add_request = gen6_add_request;
 	ring->get_seqno = gen6_ring_get_seqno;
+	ring->set_seqno = ring_set_seqno;
 	ring->irq_enable_mask = GEN6_BLITTER_USER_INTERRUPT;
 	ring->irq_get = gen6_ring_get_irq;
 	ring->irq_put = gen6_ring_put_irq;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 6af87cd..d66208c 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -90,6 +90,8 @@
 	 */
 	u32		(*get_seqno)(struct intel_ring_buffer *ring,
 				     bool lazy_coherency);
+	void		(*set_seqno)(struct intel_ring_buffer *ring,
+				     u32 seqno);
 	int		(*dispatch_execbuffer)(struct intel_ring_buffer *ring,
 					       u32 offset, u32 length,
 					       unsigned flags);
@@ -178,6 +180,13 @@
 	return ring->status_page.page_addr[reg];
 }
 
+static inline void
+intel_write_status_page(struct intel_ring_buffer *ring,
+			int reg, u32 value)
+{
+	ring->status_page.page_addr[reg] = value;
+}
+
 /**
  * Reads a dword out of the status page, which is written to from the command
  * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or
@@ -208,7 +217,7 @@
 }
 void intel_ring_advance(struct intel_ring_buffer *ring);
 int __must_check intel_ring_idle(struct intel_ring_buffer *ring);
-
+void intel_ring_init_seqno(struct intel_ring_buffer *ring, u32 seqno);
 int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
 int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index c275bf0..153377b 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1997,11 +1997,8 @@
 
 
 done:
-	if (intel_sdvo->base.base.crtc) {
-		struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
-	}
+	if (intel_sdvo->base.base.crtc)
+		intel_crtc_restore_mode(intel_sdvo->base.base.crtc);
 
 	return 0;
 #undef CHECK_PROPERTY
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea93520..984a113 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1479,8 +1479,7 @@
 	}
 
 	if (changed && crtc)
-		intel_set_mode(crtc, &crtc->mode,
-			       crtc->x, crtc->y, crtc->fb);
+		intel_crtc_restore_mode(crtc);
 out:
 	return ret;
 }
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index 0f4a366..9b991f9 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -89,6 +89,29 @@
 {
 	return mm->hole_stack.next;
 }
+
+static inline unsigned long __drm_mm_hole_node_start(struct drm_mm_node *hole_node)
+{
+	return hole_node->start + hole_node->size;
+}
+
+static inline unsigned long drm_mm_hole_node_start(struct drm_mm_node *hole_node)
+{
+	BUG_ON(!hole_node->hole_follows);
+	return __drm_mm_hole_node_start(hole_node);
+}
+
+static inline unsigned long __drm_mm_hole_node_end(struct drm_mm_node *hole_node)
+{
+	return list_entry(hole_node->node_list.next,
+			  struct drm_mm_node, node_list)->start;
+}
+
+static inline unsigned long drm_mm_hole_node_end(struct drm_mm_node *hole_node)
+{
+	return __drm_mm_hole_node_end(hole_node);
+}
+
 #define drm_mm_for_each_node(entry, mm) list_for_each_entry(entry, \
 						&(mm)->head_node.node_list, \
 						node_list)
@@ -99,9 +122,26 @@
 	     entry != NULL; entry = next, \
 		next = entry ? list_entry(entry->node_list.next, \
 			struct drm_mm_node, node_list) : NULL) \
+
+/* Note that we need to unroll list_for_each_entry in order to inline
+ * setting hole_start and hole_end on each iteration and keep the
+ * macro sane.
+ */
+#define drm_mm_for_each_hole(entry, mm, hole_start, hole_end) \
+	for (entry = list_entry((mm)->hole_stack.next, struct drm_mm_node, hole_stack); \
+	     &entry->hole_stack != &(mm)->hole_stack ? \
+	     hole_start = drm_mm_hole_node_start(entry), \
+	     hole_end = drm_mm_hole_node_end(entry), \
+	     1 : 0; \
+	     entry = list_entry(entry->hole_stack.next, struct drm_mm_node, hole_stack))
+
 /*
  * Basic range manager support (drm_mm.c)
  */
+extern struct drm_mm_node *drm_mm_create_block(struct drm_mm *mm,
+					       unsigned long start,
+					       unsigned long size,
+					       bool atomic);
 extern struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *node,
 						    unsigned long size,
 						    unsigned alignment,
diff --git a/include/drm/intel-gtt.h b/include/drm/intel-gtt.h
index 6eb76a1..3e3a166 100644
--- a/include/drm/intel-gtt.h
+++ b/include/drm/intel-gtt.h
@@ -18,8 +18,6 @@
 	/* Share the scratch page dma with ppgtts. */
 	dma_addr_t scratch_page_dma;
 	struct page *scratch_page;
-	/* for ppgtt PDE access */
-	u32 __iomem *gtt;
 	/* needed for ioremap in drm/i915 */
 	phys_addr_t gma_bus_addr;
 } *intel_gtt_get(void);