tg3: Add write accessor for AUX CTRL phy reg
This patch adds a write accessor for the aux ctrl phy register.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 7be10cf..69cd7cf 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -962,6 +962,14 @@
return err;
}
+static int tg3_phy_auxctl_write(struct tg3 *tp, int reg, u32 set)
+{
+ if (reg == MII_TG3_AUXCTL_SHDWSEL_MISC)
+ set |= MII_TG3_AUXCTL_MISC_WREN;
+
+ return tg3_writephy(tp, MII_TG3_AUX_CTRL, set | reg);
+}
+
static int tg3_bmcr_reset(struct tg3 *tp)
{
u32 phy_control;
@@ -1701,8 +1709,8 @@
phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
else
phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
- phy |= MII_TG3_AUXCTL_MISC_WREN;
- tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+ tg3_phy_auxctl_write(tp,
+ MII_TG3_AUXCTL_SHDWSEL_MISC, phy);
}
}
}
@@ -1717,8 +1725,8 @@
ret = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_MISC, &val);
if (!ret)
- tg3_writephy(tp, MII_TG3_AUX_CTRL,
- (val | (1 << 15) | (1 << 4)));
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_MISC,
+ val | MII_TG3_AUXCTL_MISC_WIRESPD_EN);
}
static void tg3_phy_apply_otp(struct tg3 *tp)
@@ -2104,13 +2112,14 @@
/* support jumbo frames */
if ((tp->phy_id & TG3_PHY_ID_MASK) == TG3_PHY_ID_BCM5401) {
/* Cannot do read-modify-write on 5401 */
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, 0x4c20);
} else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
/* Set bit 14 with read-modify-write to preserve other bits */
err = tg3_phy_auxctl_read(tp,
MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val);
if (!err)
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val | 0x4000);
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL,
+ val | MII_TG3_AUXCTL_ACTL_EXTPKTLEN);
}
/* Set phy register 0x10 bit 0 to high fifo elasticity to support
@@ -2319,11 +2328,10 @@
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
- tg3_writephy(tp, MII_TG3_AUX_CTRL,
- MII_TG3_AUXCTL_SHDWSEL_PWRCTL |
- MII_TG3_AUXCTL_PCTL_100TX_LPWR |
- MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
- MII_TG3_AUXCTL_PCTL_VREG_11V);
+ val = MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+ MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
+ MII_TG3_AUXCTL_PCTL_VREG_11V;
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_PWRCTL, val);
}
/* The PHY should not be powered down on some chips because
@@ -2717,8 +2725,13 @@
u32 mac_mode;
if (!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES)) {
- if (do_low_power) {
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
+ if (do_low_power &&
+ !(tp->phy_flags & TG3_PHYFLG_IS_FET)) {
+ tg3_phy_auxctl_write(tp,
+ MII_TG3_AUXCTL_SHDWSEL_PWRCTL,
+ MII_TG3_AUXCTL_PCTL_WOL_EN |
+ MII_TG3_AUXCTL_PCTL_100TX_LPWR |
+ MII_TG3_AUXCTL_PCTL_CL_AB_TXDAC);
udelay(40);
}
@@ -3092,7 +3105,7 @@
/* Turn off tap power management. */
/* Set Extended packet length bit */
- err = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
+ err = tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, 0x4c20);
err |= tg3_phydsp_write(tp, 0x0012, 0x1804);
err |= tg3_phydsp_write(tp, 0x0013, 0x1204);
@@ -3198,7 +3211,7 @@
udelay(80);
}
- tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x02);
+ tg3_phy_auxctl_write(tp, MII_TG3_AUXCTL_SHDWSEL_PWRCTL, 0);
/* Some third-party PHYs need to be reset on link going
* down.
@@ -3283,8 +3296,9 @@
MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
&val);
if (!err && !(val & (1 << 10))) {
- val |= (1 << 10);
- tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
+ tg3_phy_auxctl_write(tp,
+ MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
+ val | (1 << 10));
goto relink;
}
}
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index b9382f1..eaa7669 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2197,15 +2197,19 @@
#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
+#define MII_TG3_AUXCTL_ACTL_EXTPKTLEN 0x4000
#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL 0x0002
+#define MII_TG3_AUXCTL_PCTL_WOL_EN 0x0008
#define MII_TG3_AUXCTL_PCTL_100TX_LPWR 0x0010
#define MII_TG3_AUXCTL_PCTL_SPR_ISOLATE 0x0020
+#define MII_TG3_AUXCTL_PCTL_CL_AB_TXDAC 0x0040
#define MII_TG3_AUXCTL_PCTL_VREG_11V 0x0180
#define MII_TG3_AUXCTL_SHDWSEL_MISCTEST 0x0004
#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+#define MII_TG3_AUXCTL_MISC_WIRESPD_EN 0x0010
#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_TG3_AUXCTL_MISC_RDSEL_SHIFT 12
#define MII_TG3_AUXCTL_MISC_WREN 0x8000