OMAP3: Move common regulator configuration to twl-common
Some regulator config can be moved out from board files,
since they are close to identical.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index ec61e9c..34f8411 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -209,15 +209,6 @@
.default_device = &beagle_dvi_device,
};
-static struct regulator_consumer_supply beagle_vdac_supply[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static void __init beagle_display_init(void)
{
int r;
@@ -351,42 +342,11 @@
.consumer_supplies = beagle_vsim_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(beagle_vdac_supply),
- .consumer_supplies = beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies),
- .consumer_supplies = beagle_vdvi_supplies,
-};
-
static struct twl4030_platform_data beagle_twldata = {
/* platform_data for children goes here */
.gpio = &beagle_gpio_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
- .vdac = &beagle_vdac,
- .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
@@ -398,7 +358,11 @@
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ beagle_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */