| /* |
| * Copyright (C) 2008-2009 Texas Instruments Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Image Sensor Interface (ISIF) driver |
| * |
| * This driver is for configuring the ISIF IP available on DM365 or any other |
| * TI SoCs. This is used for capturing yuv or bayer video or image data |
| * from a decoder or sensor. This IP is similar to the CCDC IP on DM355 |
| * and DM6446, but with enhanced or additional ip blocks. The driver |
| * configures the ISIF upon commands from the vpfe bridge driver through |
| * ccdc_hw_device interface. |
| * |
| * TODO: 1) Raw bayer parameter settings and bayer capture |
| * 2) Add support for control ioctl |
| */ |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/videodev2.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| |
| #include <mach/mux.h> |
| |
| #include <media/davinci/isif.h> |
| #include <media/davinci/vpss.h> |
| |
| #include "isif_regs.h" |
| #include "ccdc_hw_device.h" |
| |
| /* Defaults for module configuration parameters */ |
| static struct isif_config_params_raw isif_config_defaults = { |
| .linearize = { |
| .en = 0, |
| .corr_shft = ISIF_NO_SHIFT, |
| .scale_fact = {1, 0}, |
| }, |
| .df_csc = { |
| .df_or_csc = 0, |
| .csc = { |
| .en = 0, |
| }, |
| }, |
| .dfc = { |
| .en = 0, |
| }, |
| .bclamp = { |
| .en = 0, |
| }, |
| .gain_offset = { |
| .gain = { |
| .r_ye = {1, 0}, |
| .gr_cy = {1, 0}, |
| .gb_g = {1, 0}, |
| .b_mg = {1, 0}, |
| }, |
| }, |
| .culling = { |
| .hcpat_odd = 0xff, |
| .hcpat_even = 0xff, |
| .vcpat = 0xff, |
| }, |
| .compress = { |
| .alg = ISIF_ALAW, |
| }, |
| }; |
| |
| /* ISIF operation configuration */ |
| static struct isif_oper_config { |
| struct device *dev; |
| enum vpfe_hw_if_type if_type; |
| struct isif_ycbcr_config ycbcr; |
| struct isif_params_raw bayer; |
| enum isif_data_pack data_pack; |
| /* Master clock */ |
| struct clk *mclk; |
| /* ISIF base address */ |
| void __iomem *base_addr; |
| /* ISIF Linear Table 0 */ |
| void __iomem *linear_tbl0_addr; |
| /* ISIF Linear Table 1 */ |
| void __iomem *linear_tbl1_addr; |
| } isif_cfg = { |
| .ycbcr = { |
| .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, |
| .frm_fmt = CCDC_FRMFMT_INTERLACED, |
| .win = ISIF_WIN_NTSC, |
| .fid_pol = VPFE_PINPOL_POSITIVE, |
| .vd_pol = VPFE_PINPOL_POSITIVE, |
| .hd_pol = VPFE_PINPOL_POSITIVE, |
| .pix_order = CCDC_PIXORDER_CBYCRY, |
| .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED, |
| }, |
| .bayer = { |
| .pix_fmt = CCDC_PIXFMT_RAW, |
| .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, |
| .win = ISIF_WIN_VGA, |
| .fid_pol = VPFE_PINPOL_POSITIVE, |
| .vd_pol = VPFE_PINPOL_POSITIVE, |
| .hd_pol = VPFE_PINPOL_POSITIVE, |
| .gain = { |
| .r_ye = {1, 0}, |
| .gr_cy = {1, 0}, |
| .gb_g = {1, 0}, |
| .b_mg = {1, 0}, |
| }, |
| .cfa_pat = ISIF_CFA_PAT_MOSAIC, |
| .data_msb = ISIF_BIT_MSB_11, |
| .config_params = { |
| .data_shift = ISIF_NO_SHIFT, |
| .col_pat_field0 = { |
| .olop = ISIF_GREEN_BLUE, |
| .olep = ISIF_BLUE, |
| .elop = ISIF_RED, |
| .elep = ISIF_GREEN_RED, |
| }, |
| .col_pat_field1 = { |
| .olop = ISIF_GREEN_BLUE, |
| .olep = ISIF_BLUE, |
| .elop = ISIF_RED, |
| .elep = ISIF_GREEN_RED, |
| }, |
| .test_pat_gen = 0, |
| }, |
| }, |
| .data_pack = ISIF_DATA_PACK8, |
| }; |
| |
| /* Raw Bayer formats */ |
| static const u32 isif_raw_bayer_pix_formats[] = { |
| V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; |
| |
| /* Raw YUV formats */ |
| static const u32 isif_raw_yuv_pix_formats[] = { |
| V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; |
| |
| /* register access routines */ |
| static inline u32 regr(u32 offset) |
| { |
| return __raw_readl(isif_cfg.base_addr + offset); |
| } |
| |
| static inline void regw(u32 val, u32 offset) |
| { |
| __raw_writel(val, isif_cfg.base_addr + offset); |
| } |
| |
| /* reg_modify() - read, modify and write register */ |
| static inline u32 reg_modify(u32 mask, u32 val, u32 offset) |
| { |
| u32 new_val = (regr(offset) & ~mask) | (val & mask); |
| |
| regw(new_val, offset); |
| return new_val; |
| } |
| |
| static inline void regw_lin_tbl(u32 val, u32 offset, int i) |
| { |
| if (!i) |
| __raw_writel(val, isif_cfg.linear_tbl0_addr + offset); |
| else |
| __raw_writel(val, isif_cfg.linear_tbl1_addr + offset); |
| } |
| |
| static void isif_disable_all_modules(void) |
| { |
| /* disable BC */ |
| regw(0, CLAMPCFG); |
| /* disable vdfc */ |
| regw(0, DFCCTL); |
| /* disable CSC */ |
| regw(0, CSCCTL); |
| /* disable linearization */ |
| regw(0, LINCFG0); |
| /* disable other modules here as they are supported */ |
| } |
| |
| static void isif_enable(int en) |
| { |
| if (!en) { |
| /* Before disable isif, disable all ISIF modules */ |
| isif_disable_all_modules(); |
| /* |
| * wait for next VD. Assume lowest scan rate is 12 Hz. So |
| * 100 msec delay is good enough |
| */ |
| msleep(100); |
| } |
| reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN); |
| } |
| |
| static void isif_enable_output_to_sdram(int en) |
| { |
| reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN); |
| } |
| |
| static void isif_config_culling(struct isif_cul *cul) |
| { |
| u32 val; |
| |
| /* Horizontal pattern */ |
| val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd; |
| regw(val, CULH); |
| |
| /* vertical pattern */ |
| regw(cul->vcpat, CULV); |
| |
| /* LPF */ |
| reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT, |
| cul->en_lpf << ISIF_LPF_SHIFT, MODESET); |
| } |
| |
| static void isif_config_gain_offset(void) |
| { |
| struct isif_gain_offsets_adj *gain_off_p = |
| &isif_cfg.bayer.config_params.gain_offset; |
| u32 val; |
| |
| val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) | |
| (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) | |
| (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) | |
| (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) | |
| (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) | |
| (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT); |
| |
| reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD); |
| |
| val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) | |
| gain_off_p->gain.r_ye.decimal; |
| regw(val, CRGAIN); |
| |
| val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) | |
| gain_off_p->gain.gr_cy.decimal; |
| regw(val, CGRGAIN); |
| |
| val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) | |
| gain_off_p->gain.gb_g.decimal; |
| regw(val, CGBGAIN); |
| |
| val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) | |
| gain_off_p->gain.b_mg.decimal; |
| regw(val, CBGAIN); |
| |
| regw(gain_off_p->offset, COFSTA); |
| } |
| |
| static void isif_restore_defaults(void) |
| { |
| enum vpss_ccdc_source_sel source = VPSS_CCDCIN; |
| |
| dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults..."); |
| isif_cfg.bayer.config_params = isif_config_defaults; |
| /* Enable clock to ISIF, IPIPEIF and BL */ |
| vpss_enable_clock(VPSS_CCDC_CLOCK, 1); |
| vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1); |
| vpss_enable_clock(VPSS_BL_CLOCK, 1); |
| /* Set default offset and gain */ |
| isif_config_gain_offset(); |
| vpss_select_ccdc_source(source); |
| dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults..."); |
| } |
| |
| static int isif_open(struct device *device) |
| { |
| isif_restore_defaults(); |
| return 0; |
| } |
| |
| /* This function will configure the window size to be capture in ISIF reg */ |
| static void isif_setwin(struct v4l2_rect *image_win, |
| enum ccdc_frmfmt frm_fmt, int ppc) |
| { |
| int horz_start, horz_nr_pixels; |
| int vert_start, vert_nr_lines; |
| int mid_img = 0; |
| |
| dev_dbg(isif_cfg.dev, "\nStarting isif_setwin..."); |
| /* |
| * ppc - per pixel count. indicates how many pixels per cell |
| * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. |
| * raw capture this is 1 |
| */ |
| horz_start = image_win->left << (ppc - 1); |
| horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; |
| |
| /* Writing the horizontal info into the registers */ |
| regw(horz_start & START_PX_HOR_MASK, SPH); |
| regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH); |
| vert_start = image_win->top; |
| |
| if (frm_fmt == CCDC_FRMFMT_INTERLACED) { |
| vert_nr_lines = (image_win->height >> 1) - 1; |
| vert_start >>= 1; |
| /* To account for VD since line 0 doesn't have any data */ |
| vert_start += 1; |
| } else { |
| /* To account for VD since line 0 doesn't have any data */ |
| vert_start += 1; |
| vert_nr_lines = image_win->height - 1; |
| /* configure VDINT0 and VDINT1 */ |
| mid_img = vert_start + (image_win->height / 2); |
| regw(mid_img, VDINT1); |
| } |
| |
| regw(0, VDINT0); |
| regw(vert_start & START_VER_ONE_MASK, SLV0); |
| regw(vert_start & START_VER_TWO_MASK, SLV1); |
| regw(vert_nr_lines & NUM_LINES_VER, LNV); |
| } |
| |
| static void isif_config_bclamp(struct isif_black_clamp *bc) |
| { |
| u32 val; |
| |
| /* |
| * DC Offset is always added to image data irrespective of bc enable |
| * status |
| */ |
| regw(bc->dc_offset, CLDCOFST); |
| |
| if (bc->en) { |
| val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; |
| |
| /* Enable BC and horizontal clamp caculation paramaters */ |
| val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); |
| |
| regw(val, CLAMPCFG); |
| |
| if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) { |
| /* |
| * Window count for calculation |
| * Base window selection |
| * pixel limit |
| * Horizontal size of window |
| * vertical size of the window |
| * Horizontal start position of the window |
| * Vertical start position of the window |
| */ |
| val = bc->horz.win_count_calc | |
| ((!!bc->horz.base_win_sel_calc) << |
| ISIF_HORZ_BC_WIN_SEL_SHIFT) | |
| ((!!bc->horz.clamp_pix_limit) << |
| ISIF_HORZ_BC_PIX_LIMIT_SHIFT) | |
| (bc->horz.win_h_sz_calc << |
| ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) | |
| (bc->horz.win_v_sz_calc << |
| ISIF_HORZ_BC_WIN_V_SIZE_SHIFT); |
| regw(val, CLHWIN0); |
| |
| regw(bc->horz.win_start_h_calc, CLHWIN1); |
| regw(bc->horz.win_start_v_calc, CLHWIN2); |
| } |
| |
| /* vertical clamp caculation paramaters */ |
| |
| /* Reset clamp value sel for previous line */ |
| val |= |
| (bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) | |
| (bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT); |
| regw(val, CLVWIN0); |
| |
| /* Optical Black horizontal start position */ |
| regw(bc->vert.ob_start_h, CLVWIN1); |
| /* Optical Black vertical start position */ |
| regw(bc->vert.ob_start_v, CLVWIN2); |
| /* Optical Black vertical size for calculation */ |
| regw(bc->vert.ob_v_sz_calc, CLVWIN3); |
| /* Vertical start position for BC subtraction */ |
| regw(bc->vert_start_sub, CLSV); |
| } |
| } |
| |
| static void isif_config_linearization(struct isif_linearize *linearize) |
| { |
| u32 val, i; |
| |
| if (!linearize->en) { |
| regw(0, LINCFG0); |
| return; |
| } |
| |
| /* shift value for correction & enable linearization (set lsb) */ |
| val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1; |
| regw(val, LINCFG0); |
| |
| /* Scale factor */ |
| val = ((!!linearize->scale_fact.integer) << |
| ISIF_LIN_SCALE_FACT_INTEG_SHIFT) | |
| linearize->scale_fact.decimal; |
| regw(val, LINCFG1); |
| |
| for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) { |
| if (i % 2) |
| regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1); |
| else |
| regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0); |
| } |
| } |
| |
| static int isif_config_dfc(struct isif_dfc *vdfc) |
| { |
| /* initialize retries to loop for max ~ 250 usec */ |
| u32 val, count, retries = loops_per_jiffy / (4000/HZ); |
| int i; |
| |
| if (!vdfc->en) |
| return 0; |
| |
| /* Correction mode */ |
| val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT); |
| |
| /* Correct whole line or partial */ |
| if (vdfc->corr_whole_line) |
| val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT; |
| |
| /* level shift value */ |
| val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT; |
| |
| regw(val, DFCCTL); |
| |
| /* Defect saturation level */ |
| regw(vdfc->def_sat_level, VDFSATLV); |
| |
| regw(vdfc->table[0].pos_vert, DFCMEM0); |
| regw(vdfc->table[0].pos_horz, DFCMEM1); |
| if (vdfc->corr_mode == ISIF_VDFC_NORMAL || |
| vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { |
| regw(vdfc->table[0].level_at_pos, DFCMEM2); |
| regw(vdfc->table[0].level_up_pixels, DFCMEM3); |
| regw(vdfc->table[0].level_low_pixels, DFCMEM4); |
| } |
| |
| /* set DFCMARST and set DFCMWR */ |
| val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1; |
| regw(val, DFCMEMCTL); |
| |
| count = retries; |
| while (count && (regr(DFCMEMCTL) & 0x1)) |
| count--; |
| |
| if (!count) { |
| dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n"); |
| return -1; |
| } |
| |
| for (i = 1; i < vdfc->num_vdefects; i++) { |
| regw(vdfc->table[i].pos_vert, DFCMEM0); |
| regw(vdfc->table[i].pos_horz, DFCMEM1); |
| if (vdfc->corr_mode == ISIF_VDFC_NORMAL || |
| vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) { |
| regw(vdfc->table[i].level_at_pos, DFCMEM2); |
| regw(vdfc->table[i].level_up_pixels, DFCMEM3); |
| regw(vdfc->table[i].level_low_pixels, DFCMEM4); |
| } |
| val = regr(DFCMEMCTL); |
| /* clear DFCMARST and set DFCMWR */ |
| val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT); |
| val |= 1; |
| regw(val, DFCMEMCTL); |
| |
| count = retries; |
| while (count && (regr(DFCMEMCTL) & 0x1)) |
| count--; |
| |
| if (!count) { |
| dev_err(isif_cfg.dev, |
| "defect table write timeout !!!\n"); |
| return -1; |
| } |
| } |
| if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) { |
| /* Extra cycle needed */ |
| regw(0, DFCMEM0); |
| regw(0x1FFF, DFCMEM1); |
| regw(1, DFCMEMCTL); |
| } |
| |
| /* enable VDFC */ |
| reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT), |
| DFCCTL); |
| return 0; |
| } |
| |
| static void isif_config_csc(struct isif_df_csc *df_csc) |
| { |
| u32 val1 = 0, val2 = 0, i; |
| |
| if (!df_csc->csc.en) { |
| regw(0, CSCCTL); |
| return; |
| } |
| for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) { |
| if ((i % 2) == 0) { |
| /* CSCM - LSB */ |
| val1 = (df_csc->csc.coeff[i].integer << |
| ISIF_CSC_COEF_INTEG_SHIFT) | |
| df_csc->csc.coeff[i].decimal; |
| } else { |
| |
| /* CSCM - MSB */ |
| val2 = (df_csc->csc.coeff[i].integer << |
| ISIF_CSC_COEF_INTEG_SHIFT) | |
| df_csc->csc.coeff[i].decimal; |
| val2 <<= ISIF_CSCM_MSB_SHIFT; |
| val2 |= val1; |
| regw(val2, (CSCM0 + ((i - 1) << 1))); |
| } |
| } |
| |
| /* program the active area */ |
| regw(df_csc->start_pix, FMTSPH); |
| /* |
| * one extra pixel as required for CSC. Actually number of |
| * pixel - 1 should be configured in this register. So we |
| * need to subtract 1 before writing to FMTSPH, but we will |
| * not do this since csc requires one extra pixel |
| */ |
| regw(df_csc->num_pixels, FMTLNH); |
| regw(df_csc->start_line, FMTSLV); |
| /* |
| * one extra line as required for CSC. See reason documented for |
| * num_pixels |
| */ |
| regw(df_csc->num_lines, FMTLNV); |
| |
| /* Enable CSC */ |
| regw(1, CSCCTL); |
| } |
| |
| static int isif_config_raw(void) |
| { |
| struct isif_params_raw *params = &isif_cfg.bayer; |
| struct isif_config_params_raw *module_params = |
| &isif_cfg.bayer.config_params; |
| struct vpss_pg_frame_size frame_size; |
| struct vpss_sync_pol sync; |
| u32 val; |
| |
| dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n"); |
| |
| /* |
| * Configure CCDCFG register:- |
| * Set CCD Not to swap input since input is RAW data |
| * Set FID detection function to Latch at V-Sync |
| * Set WENLOG - isif valid area |
| * Set TRGSEL |
| * Set EXTRG |
| * Packed to 8 or 16 bits |
| */ |
| |
| val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC | |
| ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN | |
| ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack; |
| |
| dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val); |
| regw(val, CCDCFG); |
| |
| /* |
| * Configure the vertical sync polarity(MODESET.VDPOL) |
| * Configure the horizontal sync polarity (MODESET.HDPOL) |
| * Configure frame id polarity (MODESET.FLDPOL) |
| * Configure data polarity |
| * Configure External WEN Selection |
| * Configure frame format(progressive or interlace) |
| * Configure pixel format (Input mode) |
| * Configure the data shift |
| */ |
| |
| val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) | |
| (params->hd_pol << ISIF_HD_POL_SHIFT) | |
| (params->fid_pol << ISIF_FID_POL_SHIFT) | |
| (ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) | |
| (ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) | |
| (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | |
| (params->pix_fmt << ISIF_INPUT_SHIFT) | |
| (params->config_params.data_shift << ISIF_DATASFT_SHIFT); |
| |
| regw(val, MODESET); |
| dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val); |
| |
| /* |
| * Configure GAMMAWD register |
| * CFA pattern setting |
| */ |
| val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT; |
| |
| /* Gamma msb */ |
| if (module_params->compress.alg == ISIF_ALAW) |
| val |= ISIF_ALAW_ENABLE; |
| |
| val |= (params->data_msb << ISIF_ALAW_GAMA_WD_SHIFT); |
| regw(val, CGAMMAWD); |
| |
| /* Configure DPCM compression settings */ |
| if (module_params->compress.alg == ISIF_DPCM) { |
| val = BIT(ISIF_DPCM_EN_SHIFT) | |
| (module_params->compress.pred << |
| ISIF_DPCM_PREDICTOR_SHIFT); |
| } |
| |
| regw(val, MISC); |
| |
| /* Configure Gain & Offset */ |
| isif_config_gain_offset(); |
| |
| /* Configure Color pattern */ |
| val = (params->config_params.col_pat_field0.olop) | |
| (params->config_params.col_pat_field0.olep << 2) | |
| (params->config_params.col_pat_field0.elop << 4) | |
| (params->config_params.col_pat_field0.elep << 6) | |
| (params->config_params.col_pat_field1.olop << 8) | |
| (params->config_params.col_pat_field1.olep << 10) | |
| (params->config_params.col_pat_field1.elop << 12) | |
| (params->config_params.col_pat_field1.elep << 14); |
| regw(val, CCOLP); |
| dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val); |
| |
| /* Configure HSIZE register */ |
| val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT; |
| |
| /* calculate line offset in 32 bytes based on pack value */ |
| if (isif_cfg.data_pack == ISIF_PACK_8BIT) |
| val |= ((params->win.width + 31) >> 5); |
| else if (isif_cfg.data_pack == ISIF_PACK_12BIT) |
| val |= (((params->win.width + |
| (params->win.width >> 2)) + 31) >> 5); |
| else |
| val |= (((params->win.width * 2) + 31) >> 5); |
| regw(val, HSIZE); |
| |
| /* Configure SDOFST register */ |
| if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { |
| if (params->image_invert_en) { |
| /* For interlace inverse mode */ |
| regw(0x4B6D, SDOFST); |
| dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n"); |
| } else { |
| /* For interlace non inverse mode */ |
| regw(0x0B6D, SDOFST); |
| dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n"); |
| } |
| } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { |
| if (params->image_invert_en) { |
| /* For progressive inverse mode */ |
| regw(0x4000, SDOFST); |
| dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n"); |
| } else { |
| /* For progressive non inverse mode */ |
| regw(0x0000, SDOFST); |
| dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n"); |
| } |
| } |
| |
| /* Configure video window */ |
| isif_setwin(¶ms->win, params->frm_fmt, 1); |
| |
| /* Configure Black Clamp */ |
| isif_config_bclamp(&module_params->bclamp); |
| |
| /* Configure Vertical Defection Pixel Correction */ |
| if (isif_config_dfc(&module_params->dfc) < 0) |
| return -EFAULT; |
| |
| if (!module_params->df_csc.df_or_csc) |
| /* Configure Color Space Conversion */ |
| isif_config_csc(&module_params->df_csc); |
| |
| isif_config_linearization(&module_params->linearize); |
| |
| /* Configure Culling */ |
| isif_config_culling(&module_params->culling); |
| |
| /* Configure horizontal and vertical offsets(DFC,LSC,Gain) */ |
| regw(module_params->horz_offset, DATAHOFST); |
| regw(module_params->vert_offset, DATAVOFST); |
| |
| /* Setup test pattern if enabled */ |
| if (params->config_params.test_pat_gen) { |
| /* Use the HD/VD pol settings from user */ |
| sync.ccdpg_hdpol = params->hd_pol; |
| sync.ccdpg_vdpol = params->vd_pol; |
| dm365_vpss_set_sync_pol(sync); |
| frame_size.hlpfr = isif_cfg.bayer.win.width; |
| frame_size.pplen = isif_cfg.bayer.win.height; |
| dm365_vpss_set_pg_frame_size(frame_size); |
| vpss_select_ccdc_source(VPSS_PGLPBK); |
| } |
| |
| dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n"); |
| return 0; |
| } |
| |
| static int isif_set_buftype(enum ccdc_buftype buf_type) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| isif_cfg.bayer.buf_type = buf_type; |
| else |
| isif_cfg.ycbcr.buf_type = buf_type; |
| |
| return 0; |
| |
| } |
| static enum ccdc_buftype isif_get_buftype(void) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| return isif_cfg.bayer.buf_type; |
| |
| return isif_cfg.ycbcr.buf_type; |
| } |
| |
| static int isif_enum_pix(u32 *pix, int i) |
| { |
| int ret = -EINVAL; |
| |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) { |
| if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) { |
| *pix = isif_raw_bayer_pix_formats[i]; |
| ret = 0; |
| } |
| } else { |
| if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) { |
| *pix = isif_raw_yuv_pix_formats[i]; |
| ret = 0; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int isif_set_pixel_format(unsigned int pixfmt) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) { |
| if (pixfmt == V4L2_PIX_FMT_SBGGR8) { |
| if ((isif_cfg.bayer.config_params.compress.alg != |
| ISIF_ALAW) && |
| (isif_cfg.bayer.config_params.compress.alg != |
| ISIF_DPCM)) { |
| dev_dbg(isif_cfg.dev, |
| "Either configure A-Law or DPCM\n"); |
| return -EINVAL; |
| } |
| isif_cfg.data_pack = ISIF_PACK_8BIT; |
| } else if (pixfmt == V4L2_PIX_FMT_SBGGR16) { |
| isif_cfg.bayer.config_params.compress.alg = |
| ISIF_NO_COMPRESSION; |
| isif_cfg.data_pack = ISIF_PACK_16BIT; |
| } else |
| return -EINVAL; |
| isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; |
| } else { |
| if (pixfmt == V4L2_PIX_FMT_YUYV) |
| isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; |
| else if (pixfmt == V4L2_PIX_FMT_UYVY) |
| isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; |
| else |
| return -EINVAL; |
| isif_cfg.data_pack = ISIF_PACK_8BIT; |
| } |
| return 0; |
| } |
| |
| static u32 isif_get_pixel_format(void) |
| { |
| u32 pixfmt; |
| |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW || |
| isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM) |
| pixfmt = V4L2_PIX_FMT_SBGGR8; |
| else |
| pixfmt = V4L2_PIX_FMT_SBGGR16; |
| else { |
| if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) |
| pixfmt = V4L2_PIX_FMT_YUYV; |
| else |
| pixfmt = V4L2_PIX_FMT_UYVY; |
| } |
| return pixfmt; |
| } |
| |
| static int isif_set_image_window(struct v4l2_rect *win) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) { |
| isif_cfg.bayer.win.top = win->top; |
| isif_cfg.bayer.win.left = win->left; |
| isif_cfg.bayer.win.width = win->width; |
| isif_cfg.bayer.win.height = win->height; |
| } else { |
| isif_cfg.ycbcr.win.top = win->top; |
| isif_cfg.ycbcr.win.left = win->left; |
| isif_cfg.ycbcr.win.width = win->width; |
| isif_cfg.ycbcr.win.height = win->height; |
| } |
| return 0; |
| } |
| |
| static void isif_get_image_window(struct v4l2_rect *win) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| *win = isif_cfg.bayer.win; |
| else |
| *win = isif_cfg.ycbcr.win; |
| } |
| |
| static unsigned int isif_get_line_length(void) |
| { |
| unsigned int len; |
| |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) { |
| if (isif_cfg.data_pack == ISIF_PACK_8BIT) |
| len = ((isif_cfg.bayer.win.width)); |
| else if (isif_cfg.data_pack == ISIF_PACK_12BIT) |
| len = (((isif_cfg.bayer.win.width * 2) + |
| (isif_cfg.bayer.win.width >> 2))); |
| else |
| len = (((isif_cfg.bayer.win.width * 2))); |
| } else |
| len = (((isif_cfg.ycbcr.win.width * 2))); |
| return ALIGN(len, 32); |
| } |
| |
| static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| isif_cfg.bayer.frm_fmt = frm_fmt; |
| else |
| isif_cfg.ycbcr.frm_fmt = frm_fmt; |
| return 0; |
| } |
| static enum ccdc_frmfmt isif_get_frame_format(void) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| return isif_cfg.bayer.frm_fmt; |
| return isif_cfg.ycbcr.frm_fmt; |
| } |
| |
| static int isif_getfid(void) |
| { |
| return (regr(MODESET) >> 15) & 0x1; |
| } |
| |
| /* misc operations */ |
| static void isif_setfbaddr(unsigned long addr) |
| { |
| regw((addr >> 21) & 0x07ff, CADU); |
| regw((addr >> 5) & 0x0ffff, CADL); |
| } |
| |
| static int isif_set_hw_if_params(struct vpfe_hw_if_param *params) |
| { |
| isif_cfg.if_type = params->if_type; |
| |
| switch (params->if_type) { |
| case VPFE_BT656: |
| case VPFE_BT656_10BIT: |
| case VPFE_YCBCR_SYNC_8: |
| isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT; |
| isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; |
| break; |
| case VPFE_BT1120: |
| case VPFE_YCBCR_SYNC_16: |
| isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT; |
| isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; |
| break; |
| case VPFE_RAW_BAYER: |
| isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW; |
| break; |
| default: |
| dev_dbg(isif_cfg.dev, "Invalid interface type\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* This function will configure ISIF for YCbCr parameters. */ |
| static int isif_config_ycbcr(void) |
| { |
| struct isif_ycbcr_config *params = &isif_cfg.ycbcr; |
| struct vpss_pg_frame_size frame_size; |
| u32 modeset = 0, ccdcfg = 0; |
| struct vpss_sync_pol sync; |
| |
| dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr..."); |
| |
| /* configure pixel format or input mode */ |
| modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) | |
| (params->frm_fmt << ISIF_FRM_FMT_SHIFT) | |
| (params->fid_pol << ISIF_FID_POL_SHIFT) | |
| (params->hd_pol << ISIF_HD_POL_SHIFT) | |
| (params->vd_pol << ISIF_VD_POL_SHIFT); |
| |
| /* pack the data to 8-bit ISIFCFG */ |
| switch (isif_cfg.if_type) { |
| case VPFE_BT656: |
| if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { |
| dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); |
| return -EINVAL; |
| } |
| modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT); |
| regw(3, REC656IF); |
| ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR; |
| break; |
| case VPFE_BT656_10BIT: |
| if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { |
| dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); |
| return -EINVAL; |
| } |
| /* setup BT.656, embedded sync */ |
| regw(3, REC656IF); |
| /* enable 10 bit mode in ccdcfg */ |
| ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR | |
| ISIF_BW656_ENABLE; |
| break; |
| case VPFE_BT1120: |
| if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { |
| dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); |
| return -EINVAL; |
| } |
| regw(3, REC656IF); |
| break; |
| |
| case VPFE_YCBCR_SYNC_8: |
| ccdcfg |= ISIF_DATA_PACK8; |
| ccdcfg |= ISIF_YCINSWP_YCBCR; |
| if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) { |
| dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); |
| return -EINVAL; |
| } |
| break; |
| case VPFE_YCBCR_SYNC_16: |
| if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) { |
| dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n"); |
| return -EINVAL; |
| } |
| break; |
| default: |
| /* should never come here */ |
| dev_dbg(isif_cfg.dev, "Invalid interface type\n"); |
| return -EINVAL; |
| } |
| |
| regw(modeset, MODESET); |
| |
| /* Set up pix order */ |
| ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT; |
| |
| regw(ccdcfg, CCDCFG); |
| |
| /* configure video window */ |
| if ((isif_cfg.if_type == VPFE_BT1120) || |
| (isif_cfg.if_type == VPFE_YCBCR_SYNC_16)) |
| isif_setwin(¶ms->win, params->frm_fmt, 1); |
| else |
| isif_setwin(¶ms->win, params->frm_fmt, 2); |
| |
| /* |
| * configure the horizontal line offset |
| * this is done by rounding up width to a multiple of 16 pixels |
| * and multiply by two to account for y:cb:cr 4:2:2 data |
| */ |
| regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE); |
| |
| /* configure the memory line offset */ |
| if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) && |
| (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)) |
| /* two fields are interleaved in memory */ |
| regw(0x00000249, SDOFST); |
| |
| /* Setup test pattern if enabled */ |
| if (isif_cfg.bayer.config_params.test_pat_gen) { |
| sync.ccdpg_hdpol = params->hd_pol; |
| sync.ccdpg_vdpol = params->vd_pol; |
| dm365_vpss_set_sync_pol(sync); |
| dm365_vpss_set_pg_frame_size(frame_size); |
| } |
| return 0; |
| } |
| |
| static int isif_configure(void) |
| { |
| if (isif_cfg.if_type == VPFE_RAW_BAYER) |
| return isif_config_raw(); |
| return isif_config_ycbcr(); |
| } |
| |
| static int isif_close(struct device *device) |
| { |
| /* copy defaults to module params */ |
| isif_cfg.bayer.config_params = isif_config_defaults; |
| return 0; |
| } |
| |
| static struct ccdc_hw_device isif_hw_dev = { |
| .name = "ISIF", |
| .owner = THIS_MODULE, |
| .hw_ops = { |
| .open = isif_open, |
| .close = isif_close, |
| .enable = isif_enable, |
| .enable_out_to_sdram = isif_enable_output_to_sdram, |
| .set_hw_if_params = isif_set_hw_if_params, |
| .configure = isif_configure, |
| .set_buftype = isif_set_buftype, |
| .get_buftype = isif_get_buftype, |
| .enum_pix = isif_enum_pix, |
| .set_pixel_format = isif_set_pixel_format, |
| .get_pixel_format = isif_get_pixel_format, |
| .set_frame_format = isif_set_frame_format, |
| .get_frame_format = isif_get_frame_format, |
| .set_image_window = isif_set_image_window, |
| .get_image_window = isif_get_image_window, |
| .get_line_length = isif_get_line_length, |
| .setfbaddr = isif_setfbaddr, |
| .getfid = isif_getfid, |
| }, |
| }; |
| |
| static int __devinit isif_probe(struct platform_device *pdev) |
| { |
| void (*setup_pinmux)(void); |
| struct resource *res; |
| void *__iomem addr; |
| int status = 0, i; |
| |
| /* |
| * first try to register with vpfe. If not correct platform, then we |
| * don't have to iomap |
| */ |
| status = vpfe_register_ccdc_device(&isif_hw_dev); |
| if (status < 0) |
| return status; |
| |
| /* Get and enable Master clock */ |
| isif_cfg.mclk = clk_get(&pdev->dev, "master"); |
| if (IS_ERR(isif_cfg.mclk)) { |
| status = PTR_ERR(isif_cfg.mclk); |
| goto fail_mclk; |
| } |
| if (clk_prepare_enable(isif_cfg.mclk)) { |
| status = -ENODEV; |
| goto fail_mclk; |
| } |
| |
| /* Platform data holds setup_pinmux function ptr */ |
| if (NULL == pdev->dev.platform_data) { |
| status = -ENODEV; |
| goto fail_mclk; |
| } |
| setup_pinmux = pdev->dev.platform_data; |
| /* |
| * setup Mux configuration for ccdc which may be different for |
| * different SoCs using this CCDC |
| */ |
| setup_pinmux(); |
| |
| i = 0; |
| /* Get the ISIF base address, linearization table0 and table1 addr. */ |
| while (i < 3) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, i); |
| if (!res) { |
| status = -ENODEV; |
| goto fail_nobase_res; |
| } |
| res = request_mem_region(res->start, resource_size(res), |
| res->name); |
| if (!res) { |
| status = -EBUSY; |
| goto fail_nobase_res; |
| } |
| addr = ioremap_nocache(res->start, resource_size(res)); |
| if (!addr) { |
| status = -ENOMEM; |
| goto fail_base_iomap; |
| } |
| switch (i) { |
| case 0: |
| /* ISIF base address */ |
| isif_cfg.base_addr = addr; |
| break; |
| case 1: |
| /* ISIF linear tbl0 address */ |
| isif_cfg.linear_tbl0_addr = addr; |
| break; |
| default: |
| /* ISIF linear tbl0 address */ |
| isif_cfg.linear_tbl1_addr = addr; |
| break; |
| } |
| i++; |
| } |
| isif_cfg.dev = &pdev->dev; |
| |
| printk(KERN_NOTICE "%s is registered with vpfe.\n", |
| isif_hw_dev.name); |
| return 0; |
| fail_base_iomap: |
| release_mem_region(res->start, resource_size(res)); |
| i--; |
| fail_nobase_res: |
| if (isif_cfg.base_addr) |
| iounmap(isif_cfg.base_addr); |
| if (isif_cfg.linear_tbl0_addr) |
| iounmap(isif_cfg.linear_tbl0_addr); |
| |
| while (i >= 0) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, i); |
| release_mem_region(res->start, resource_size(res)); |
| i--; |
| } |
| fail_mclk: |
| clk_disable_unprepare(isif_cfg.mclk); |
| clk_put(isif_cfg.mclk); |
| vpfe_unregister_ccdc_device(&isif_hw_dev); |
| return status; |
| } |
| |
| static int isif_remove(struct platform_device *pdev) |
| { |
| struct resource *res; |
| int i = 0; |
| |
| iounmap(isif_cfg.base_addr); |
| iounmap(isif_cfg.linear_tbl0_addr); |
| iounmap(isif_cfg.linear_tbl1_addr); |
| while (i < 3) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, i); |
| if (res) |
| release_mem_region(res->start, resource_size(res)); |
| i++; |
| } |
| vpfe_unregister_ccdc_device(&isif_hw_dev); |
| clk_disable_unprepare(isif_cfg.mclk); |
| clk_put(isif_cfg.mclk); |
| return 0; |
| } |
| |
| static struct platform_driver isif_driver = { |
| .driver = { |
| .name = "isif", |
| .owner = THIS_MODULE, |
| }, |
| .remove = __devexit_p(isif_remove), |
| .probe = isif_probe, |
| }; |
| |
| module_platform_driver(isif_driver); |
| |
| MODULE_LICENSE("GPL"); |