Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull GPIO updates from Grant Likely:
"GPIO follow up patch and type change for v3.5 merge window
Primarily device driver additions, features and bug fixes. Not much
touching gpio common subsystem support. Should not be scary."
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
gpio: Provide the STMPE GPIO driver with its own IRQ Domain
gpio: add TS-5500 DIO blocks support
gpio: pcf857x: use client->irq for gpio_to_irq()
gpio: stmpe: Add DT support for stmpe gpio
gpio: pl061 depends on ARM
gpio/pl061: remove old comment
gpio: SPEAr: add spi chipselect control driver
gpio: gpio-max710x: Support device tree probing
gpio: twl4030: Use only TWL4030_MODULE_LED for LED configuration
gpio: tegra: read output value when gpio is set in direction_out
gpio: pca953x: Add compatible strings to gpio-pca953x driver
gpio: pca953x: Register an IRQ domain
gpio: mvebu: Set free callback for gpio_chip
gpio: tegra: Drop exporting static functions
gpio: tegra: Staticize non-exported symbols
gpio: tegra: fix suspend/resume apis
gpio-pch: Set parent dev for gpio chip
gpio: em: Fix build errors
GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init()
gpio/tc3589x: convert to use the simple irqdomain
...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
new file mode 100644
index 0000000..a0e4cf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -0,0 +1,18 @@
+STMPE gpio
+----------
+
+Required properties:
+ - compatible: "st,stmpe-gpio"
+
+Optional properties:
+ - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
+ due to different usage (e.g. touch, keypad)
+
+Node name must be stmpe_gpio and should be child node of stmpe node to which it
+belongs.
+
+Example:
+ stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ st,norequest-mask = <0x20>; //gpio 5 can't be used
+ };
diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt
new file mode 100644
index 0000000..96c37eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt
@@ -0,0 +1,50 @@
+=== ST Microelectronics SPEAr SPI CS Driver ===
+
+SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
+Cell spi controller through its system registers, which otherwise remains under
+PL022 control. If chipselect remain under PL022 control then they would be
+released as soon as transfer is over and TxFIFO becomes empty. This is not
+desired by some of the device protocols above spi which expect (multiple)
+transfers without releasing their chipselects.
+
+Chipselects can be controlled by software by turning them as GPIOs. SPEAr
+provides another interface through system registers through which software can
+directly control each PL022 chipselect. Hence, it is natural for SPEAr to export
+the control of this interface as gpio.
+
+Required properties:
+
+ * compatible: should be defined as "st,spear-spics-gpio"
+ * reg: mentioning address range of spics controller
+ * st-spics,peripcfg-reg: peripheral configuration register offset
+ * st-spics,sw-enable-bit: bit offset to enable sw control
+ * st-spics,cs-value-bit: bit offset to drive chipselect low or high
+ * st-spics,cs-enable-mask: chip select number bit mask
+ * st-spics,cs-enable-shift: chip select number program offset
+ * gpio-controller: Marks the device node as gpio controller
+ * #gpio-cells: should be 1 and will mention chip select number
+
+All the above bit offsets are within peripcfg register.
+
+Example:
+-------
+spics: spics@e0700000{
+ compatible = "st,spear-spics-gpio";
+ reg = <0xe0700000 0x1000>;
+ st-spics,peripcfg-reg = <0x3b0>;
+ st-spics,sw-enable-bit = <12>;
+ st-spics,cs-value-bit = <11>;
+ st-spics,cs-enable-mask = <3>;
+ st-spics,cs-enable-shift = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
+
+
+spi0: spi@e0100000 {
+ status = "okay";
+ num-cs = <3>;
+ cs-gpios = <&gpio1 7 0>, <&spics 0>,
+ <&spics 1>;
+ ...
+}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 672e0a2..8a027f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -366,6 +366,7 @@
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select COMMON_CLK
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..7a05de7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -548,7 +548,6 @@
/* I2C */
static struct pcf857x_platform_data pcf8575_pdata = {
.gpio_base = GPIO_PCF8575_BASE,
- .irq = intcs_evt2irq(0x3260), /* IRQ19 */
};
static struct i2c_board_info i2c0_devices[] = {
@@ -570,6 +569,7 @@
static struct i2c_board_info i2c3_devices[] = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
+ .irq = intcs_evt2irq(0x3260), /* IRQ19 */
.platform_data = &pcf8575_pdata,
},
};
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index f8db7b2..87dbd81 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,6 +12,7 @@
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
+ select GPIO_SPEAR_SPICS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f165576..14a6c29 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -90,11 +90,26 @@
help
Say yes here to enable the GPIO driver for the DA9052 chip.
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
config GPIO_MAX730X
tristate
comment "Memory mapped GPIO drivers:"
+config GPIO_CLPS711X
+ def_bool y
+ depends on ARCH_CLPS711X
+
config GPIO_GENERIC_PLATFORM
tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
select GPIO_GENERIC
@@ -174,7 +189,7 @@
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
- depends on ARM_AMBA
+ depends on ARM && ARM_AMBA
select GENERIC_IRQ_CHIP
help
Say yes here to support the PrimeCell PL061 GPIO device
@@ -185,6 +200,13 @@
help
Say yes here to support the PXA GPIO device
+config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+ select GENERIC_IRQ_CHIP
+ help
+ Say yes here to support ST SPEAr SPI Chip Select as GPIO device
+
config GPIO_STA2X11
bool "STA2x11/ConneXt GPIO support"
depends on MFD_STA2X11
@@ -193,6 +215,14 @@
Say yes here to support the STA2x11/ConneXt GPIO device.
The GPIO module has 128 GPIO pins with alternate functions.
+config GPIO_TS5500
+ tristate "TS-5500 DIO blocks and compatibles"
+ help
+ This driver supports Digital I/O exposed by pin blocks found on some
+ Technologic Systems platforms. It includes, but is not limited to, 3
+ blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+ LCD port.
+
config GPIO_VT8500
bool "VIA/Wondermedia SoC GPIO Support"
depends on ARCH_VT8500
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 420dbac..76b3446 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -17,8 +17,10 @@
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
@@ -58,6 +60,7 @@
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
+obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
@@ -69,6 +72,7 @@
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
+obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
new file mode 100644
index 0000000..ce63b75
--- /dev/null
+++ b/drivers/gpio/gpio-clps711x.c
@@ -0,0 +1,199 @@
+/*
+ * CLPS711X GPIO driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#define CLPS711X_GPIO_PORTS 5
+#define CLPS711X_GPIO_NAME "gpio-clps711x"
+
+struct clps711x_gpio {
+ struct gpio_chip chip[CLPS711X_GPIO_PORTS];
+ spinlock_t lock;
+};
+
+static void __iomem *clps711x_ports[] = {
+ CLPS711X_VIRT_BASE + PADR,
+ CLPS711X_VIRT_BASE + PBDR,
+ CLPS711X_VIRT_BASE + PCDR,
+ CLPS711X_VIRT_BASE + PDDR,
+ CLPS711X_VIRT_BASE + PEDR,
+};
+
+static void __iomem *clps711x_pdirs[] = {
+ CLPS711X_VIRT_BASE + PADDR,
+ CLPS711X_VIRT_BASE + PBDDR,
+ CLPS711X_VIRT_BASE + PCDDR,
+ CLPS711X_VIRT_BASE + PDDDR,
+ CLPS711X_VIRT_BASE + PEDDR,
+};
+
+#define clps711x_port(x) clps711x_ports[x->base / 8]
+#define clps711x_pdir(x) clps711x_pdirs[x->base / 8]
+
+static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+{
+ return !!(readb(clps711x_port(chip)) & (1 << offset));
+}
+
+static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+ if (value)
+ tmp |= 1 << offset;
+ writeb(tmp, clps711x_port(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static int gpio_clps711x_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static int gpio_clps711x_dir_out(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+ if (value)
+ tmp |= 1 << offset;
+ writeb(tmp, clps711x_port(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static int gpio_clps711x_dir_in_inv(struct gpio_chip *chip, unsigned offset)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static int gpio_clps711x_dir_out_inv(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ int tmp;
+ unsigned long flags;
+ struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+ spin_lock_irqsave(&gpio->lock, flags);
+ tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+ writeb(tmp, clps711x_pdir(chip));
+ tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+ if (value)
+ tmp |= 1 << offset;
+ writeb(tmp, clps711x_port(chip));
+ spin_unlock_irqrestore(&gpio->lock, flags);
+
+ return 0;
+}
+
+static struct {
+ char *name;
+ int nr;
+ int inv_dir;
+} clps711x_gpio_ports[] __initconst = {
+ { "PORTA", 8, 0, },
+ { "PORTB", 8, 0, },
+ { "PORTC", 8, 0, },
+ { "PORTD", 8, 1, },
+ { "PORTE", 3, 0, },
+};
+
+static int __init gpio_clps711x_init(void)
+{
+ int i;
+ struct platform_device *pdev;
+ struct clps711x_gpio *gpio;
+
+ pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
+ if (!pdev) {
+ pr_err("Cannot create platform device: %s\n",
+ CLPS711X_GPIO_NAME);
+ return -ENOMEM;
+ }
+
+ platform_device_add(pdev);
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
+ GFP_KERNEL);
+ if (!gpio) {
+ dev_err(&pdev->dev, "GPIO allocating memory error\n");
+ platform_device_unregister(pdev);
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
+ spin_lock_init(&gpio->lock);
+
+ for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
+ gpio->chip[i].owner = THIS_MODULE;
+ gpio->chip[i].dev = &pdev->dev;
+ gpio->chip[i].label = clps711x_gpio_ports[i].name;
+ gpio->chip[i].base = i * 8;
+ gpio->chip[i].ngpio = clps711x_gpio_ports[i].nr;
+ gpio->chip[i].get = gpio_clps711x_get;
+ gpio->chip[i].set = gpio_clps711x_set;
+ if (!clps711x_gpio_ports[i].inv_dir) {
+ gpio->chip[i].direction_input = gpio_clps711x_dir_in;
+ gpio->chip[i].direction_output = gpio_clps711x_dir_out;
+ } else {
+ gpio->chip[i].direction_input = gpio_clps711x_dir_in_inv;
+ gpio->chip[i].direction_output = gpio_clps711x_dir_out_inv;
+ }
+ WARN_ON(gpiochip_add(&gpio->chip[i]));
+ }
+
+ dev_info(&pdev->dev, "GPIO driver initialized\n");
+
+ return 0;
+}
+arch_initcall(gpio_clps711x_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("CLPS711X GPIO driver");
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
new file mode 100644
index 0000000..55d83c7
--- /dev/null
+++ b/drivers/gpio/gpio-da9055.c
@@ -0,0 +1,204 @@
+/*
+ * GPIO Driver for Dialog DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_VDD_IO 0x0
+#define DA9055_PUSH_PULL 0x3
+#define DA9055_ACT_LOW 0x0
+#define DA9055_GPI 0x1
+#define DA9055_PORT_MASK 0x3
+#define DA9055_PORT_SHIFT(offset) (4 * (offset % 2))
+
+#define DA9055_INPUT DA9055_GPI
+#define DA9055_OUTPUT DA9055_PUSH_PULL
+#define DA9055_IRQ_GPI0 3
+
+struct da9055_gpio {
+ struct da9055 *da9055;
+ struct gpio_chip gp;
+};
+
+static inline struct da9055_gpio *to_da9055_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct da9055_gpio, gp);
+}
+
+static int da9055_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ int gpio_direction = 0;
+ int ret;
+
+ /* Get GPIO direction */
+ ret = da9055_reg_read(gpio->da9055, (offset >> 1) + DA9055_REG_GPIO0_1);
+ if (ret < 0)
+ return ret;
+
+ gpio_direction = ret & (DA9055_PORT_MASK) << DA9055_PORT_SHIFT(offset);
+ gpio_direction >>= DA9055_PORT_SHIFT(offset);
+ switch (gpio_direction) {
+ case DA9055_INPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_STATUS_B);
+ if (ret < 0)
+ return ret;
+ break;
+ case DA9055_OUTPUT:
+ ret = da9055_reg_read(gpio->da9055, DA9055_REG_GPIO_MODE0_2);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret & (1 << offset);
+
+}
+
+static void da9055_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+
+ da9055_reg_update(gpio->da9055,
+ DA9055_REG_GPIO_MODE0_2,
+ 1 << offset,
+ value << offset);
+}
+
+static int da9055_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+
+ reg_byte = (DA9055_ACT_LOW | DA9055_GPI)
+ << DA9055_PORT_SHIFT(offset);
+
+ return da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+}
+
+static int da9055_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int value)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ unsigned char reg_byte;
+ int ret;
+
+ reg_byte = (DA9055_VDD_IO | DA9055_PUSH_PULL)
+ << DA9055_PORT_SHIFT(offset);
+
+ ret = da9055_reg_update(gpio->da9055, (offset >> 1) +
+ DA9055_REG_GPIO0_1,
+ DA9055_PORT_MASK <<
+ DA9055_PORT_SHIFT(offset),
+ reg_byte);
+ if (ret < 0)
+ return ret;
+
+ da9055_gpio_set(gc, offset, value);
+
+ return 0;
+}
+
+static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+ struct da9055_gpio *gpio = to_da9055_gpio(gc);
+ struct da9055 *da9055 = gpio->da9055;
+
+ return regmap_irq_get_virq(da9055->irq_data,
+ DA9055_IRQ_GPI0 + offset);
+}
+
+static struct gpio_chip reference_gp __devinitdata = {
+ .label = "da9055-gpio",
+ .owner = THIS_MODULE,
+ .get = da9055_gpio_get,
+ .set = da9055_gpio_set,
+ .direction_input = da9055_gpio_direction_input,
+ .direction_output = da9055_gpio_direction_output,
+ .to_irq = da9055_gpio_to_irq,
+ .can_sleep = 1,
+ .ngpio = 3,
+ .base = -1,
+};
+
+static int __devinit da9055_gpio_probe(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio;
+ struct da9055_pdata *pdata;
+ int ret;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (gpio == NULL)
+ return -ENOMEM;
+
+ gpio->da9055 = dev_get_drvdata(pdev->dev.parent);
+ pdata = gpio->da9055->dev->platform_data;
+
+ gpio->gp = reference_gp;
+ if (pdata && pdata->gpio_base)
+ gpio->gp.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&gpio->gp);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+ goto err_mem;
+ }
+
+ platform_set_drvdata(pdev, gpio);
+
+ return 0;
+
+err_mem:
+ return ret;
+}
+
+static int __devexit da9055_gpio_remove(struct platform_device *pdev)
+{
+ struct da9055_gpio *gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&gpio->gp);
+}
+
+static struct platform_driver da9055_gpio_driver = {
+ .probe = da9055_gpio_probe,
+ .remove = __devexit_p(da9055_gpio_remove),
+ .driver = {
+ .name = "da9055-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9055_gpio_init(void)
+{
+ return platform_driver_register(&da9055_gpio_driver);
+}
+subsys_initcall(da9055_gpio_init);
+
+static void __exit da9055_gpio_exit(void)
+{
+ platform_driver_unregister(&da9055_gpio_driver);
+}
+module_exit(da9055_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-gpio");
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index efb4c2d..b007063 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -35,7 +35,6 @@
struct em_gio_priv {
void __iomem *base0;
void __iomem *base1;
- unsigned int irq_base;
spinlock_t sense_lock;
struct platform_device *pdev;
struct gpio_chip gpio_chip;
@@ -214,7 +213,7 @@
static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- return irq_find_mapping(gpio_to_priv(chip)->irq_domain, offset);
+ return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
}
static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
@@ -234,40 +233,6 @@
.map = em_gio_irq_domain_map,
};
-static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
-{
- struct platform_device *pdev = p->pdev;
- struct gpio_em_config *pdata = pdev->dev.platform_data;
-
- p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
- pdata->number_of_pins, numa_node_id());
- if (p->irq_base < 0) {
- dev_err(&pdev->dev, "cannot get irq_desc\n");
- return p->irq_base;
- }
- pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
- pdata->gpio_base, pdata->number_of_pins, p->irq_base);
-
- p->irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
- pdata->number_of_pins,
- p->irq_base, 0,
- &em_gio_irq_domain_ops, p);
- if (!p->irq_domain) {
- irq_free_descs(p->irq_base, pdata->number_of_pins);
- return -ENXIO;
- }
-
- return 0;
-}
-
-static void em_gio_irq_domain_cleanup(struct em_gio_priv *p)
-{
- struct gpio_em_config *pdata = p->pdev->dev.platform_data;
-
- irq_free_descs(p->irq_base, pdata->number_of_pins);
- /* FIXME: irq domain wants to be freed! */
-}
-
static int __devinit em_gio_probe(struct platform_device *pdev)
{
struct gpio_em_config *pdata = pdev->dev.platform_data;
@@ -334,8 +299,11 @@
irq_chip->irq_set_type = em_gio_irq_set_type;
irq_chip->flags = IRQCHIP_SKIP_SET_WAKE;
- ret = em_gio_irq_domain_init(p);
- if (ret) {
+ p->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+ pdata->number_of_pins,
+ &em_gio_irq_domain_ops, p);
+ if (!p->irq_domain) {
+ ret = -ENXIO;
dev_err(&pdev->dev, "cannot initialize irq domain\n");
goto err3;
}
@@ -364,7 +332,7 @@
err5:
free_irq(irq[0]->start, pdev);
err4:
- em_gio_irq_domain_cleanup(p);
+ irq_domain_remove(p->irq_domain);
err3:
iounmap(p->base1);
err2:
@@ -390,7 +358,7 @@
free_irq(irq[1]->start, pdev);
free_irq(irq[0]->start, pdev);
- em_gio_irq_domain_cleanup(p);
+ irq_domain_remove(p->irq_domain);
iounmap(p->base1);
iounmap(p->base0);
kfree(p);
diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c
index 05e2dac..c4bf86a 100644
--- a/drivers/gpio/gpio-max730x.c
+++ b/drivers/gpio/gpio-max730x.c
@@ -167,10 +167,6 @@
int i, ret;
pdata = dev->platform_data;
- if (!pdata || !pdata->base) {
- dev_err(dev, "incorrect or missing platform data\n");
- return -EINVAL;
- }
mutex_init(&ts->lock);
dev_set_drvdata(dev, ts);
@@ -178,7 +174,12 @@
/* Power up the chip and disable IRQ output */
ts->write(dev, 0x04, 0x01);
- ts->input_pullup_active = pdata->input_pullup_active;
+ if (pdata) {
+ ts->input_pullup_active = pdata->input_pullup_active;
+ ts->chip.base = pdata->base;
+ } else {
+ ts->chip.base = -1;
+ }
ts->chip.label = dev->driver->name;
ts->chip.direction_input = max7301_direction_input;
@@ -186,7 +187,6 @@
ts->chip.direction_output = max7301_direction_output;
ts->chip.set = max7301_set;
- ts->chip.base = pdata->base;
ts->chip.ngpio = PIN_NUMBER;
ts->chip.can_sleep = 1;
ts->chip.dev = dev;
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index be65c04..a515b92 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -168,12 +168,12 @@
* Functions implementing the gpio_chip methods
*/
-int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
+static int mvebu_gpio_request(struct gpio_chip *chip, unsigned pin)
{
return pinctrl_request_gpio(chip->base + pin);
}
-void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
+static void mvebu_gpio_free(struct gpio_chip *chip, unsigned pin)
{
pinctrl_free_gpio(chip->base + pin);
}
@@ -546,6 +546,7 @@
mvchip->chip.label = dev_name(&pdev->dev);
mvchip->chip.dev = &pdev->dev;
mvchip->chip.request = mvebu_gpio_request;
+ mvchip->chip.free = mvebu_gpio_free;
mvchip->chip.direction_input = mvebu_gpio_direction_input;
mvchip->chip.get = mvebu_gpio_get;
mvchip->chip.direction_output = mvebu_gpio_direction_output;
@@ -673,8 +674,8 @@
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
- mvchip->domain = irq_domain_add_legacy(np, mvchip->chip.ngpio,
- mvchip->irqbase, 0,
+ mvchip->domain = irq_domain_add_simple(np, mvchip->chip.ngpio,
+ mvchip->irqbase,
&irq_domain_simple_ops,
mvchip);
if (!mvchip->domain) {
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index d335af1..d71e5bd 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1105,7 +1105,7 @@
if (!pdata)
return -EINVAL;
- bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL);
+ bank = devm_kzalloc(dev, sizeof(struct gpio_bank), GFP_KERNEL);
if (!bank) {
dev_err(dev, "Memory alloc failed\n");
return -ENOMEM;
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 9c693ae..0c5eaf5 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/slab.h>
@@ -83,6 +84,7 @@
u32 irq_trig_raise;
u32 irq_trig_fall;
int irq_base;
+ struct irq_domain *domain;
#endif
struct i2c_client *client;
@@ -333,14 +335,14 @@
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
- chip->irq_mask &= ~(1 << (d->irq - chip->irq_base));
+ chip->irq_mask &= ~(1 << d->hwirq);
}
static void pca953x_irq_unmask(struct irq_data *d)
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
- chip->irq_mask |= 1 << (d->irq - chip->irq_base);
+ chip->irq_mask |= 1 << d->hwirq;
}
static void pca953x_irq_bus_lock(struct irq_data *d)
@@ -372,8 +374,7 @@
static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
- u32 level = d->irq - chip->irq_base;
- u32 mask = 1 << level;
+ u32 mask = 1 << d->hwirq;
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@@ -454,7 +455,7 @@
do {
level = __ffs(pending);
- handle_nested_irq(level + chip->irq_base);
+ handle_nested_irq(irq_find_mapping(chip->domain, level));
pending &= ~(1 << level);
} while (pending);
@@ -499,6 +500,17 @@
if (chip->irq_base < 0)
goto out_failed;
+ chip->domain = irq_domain_add_legacy(client->dev.of_node,
+ chip->gpio_chip.ngpio,
+ chip->irq_base,
+ 0,
+ &irq_domain_simple_ops,
+ NULL);
+ if (!chip->domain) {
+ ret = -ENODEV;
+ goto out_irqdesc_free;
+ }
+
for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) {
int irq = lvl + chip->irq_base;
@@ -521,7 +533,7 @@
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
- goto out_failed;
+ goto out_irqdesc_free;
}
chip->gpio_chip.to_irq = pca953x_gpio_to_irq;
@@ -529,6 +541,8 @@
return 0;
+out_irqdesc_free:
+ irq_free_descs(chip->irq_base, chip->gpio_chip.ngpio);
out_failed:
chip->irq_base = -1;
return ret;
@@ -751,9 +765,38 @@
return 0;
}
+static const struct of_device_id pca953x_dt_ids[] = {
+ { .compatible = "nxp,pca9534", },
+ { .compatible = "nxp,pca9535", },
+ { .compatible = "nxp,pca9536", },
+ { .compatible = "nxp,pca9537", },
+ { .compatible = "nxp,pca9538", },
+ { .compatible = "nxp,pca9539", },
+ { .compatible = "nxp,pca9554", },
+ { .compatible = "nxp,pca9555", },
+ { .compatible = "nxp,pca9556", },
+ { .compatible = "nxp,pca9557", },
+ { .compatible = "nxp,pca9574", },
+ { .compatible = "nxp,pca9575", },
+
+ { .compatible = "maxim,max7310", },
+ { .compatible = "maxim,max7312", },
+ { .compatible = "maxim,max7313", },
+ { .compatible = "maxim,max7315", },
+
+ { .compatible = "ti,pca6107", },
+ { .compatible = "ti,tca6408", },
+ { .compatible = "ti,tca6416", },
+ { .compatible = "ti,tca6424", },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
+
static struct i2c_driver pca953x_driver = {
.driver = {
.name = "pca953x",
+ .of_match_table = pca953x_dt_ids,
},
.probe = pca953x_probe,
.remove = pca953x_remove,
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 16af35c..a19b745 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -223,11 +223,11 @@
static int pcf857x_irq_domain_init(struct pcf857x *gpio,
struct pcf857x_platform_data *pdata,
- struct device *dev)
+ struct i2c_client *client)
{
int status;
- gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+ gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
gpio->chip.ngpio,
&pcf857x_irq_domain_ops,
NULL);
@@ -235,15 +235,15 @@
goto fail;
/* enable real irq */
- status = request_irq(pdata->irq, pcf857x_irq_demux, 0,
- dev_name(dev), gpio);
+ status = request_irq(client->irq, pcf857x_irq_demux, 0,
+ dev_name(&client->dev), gpio);
if (status)
goto fail;
/* enable gpio_to_irq() */
INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
gpio->chip.to_irq = pcf857x_to_irq;
- gpio->irq = pdata->irq;
+ gpio->irq = client->irq;
return 0;
@@ -285,8 +285,8 @@
gpio->chip.ngpio = id->driver_data;
/* enable gpio_to_irq() if platform has settings */
- if (pdata && pdata->irq) {
- status = pcf857x_irq_domain_init(gpio, pdata, &client->dev);
+ if (pdata && client->irq) {
+ status = pcf857x_irq_domain_init(gpio, pdata, client);
if (status < 0) {
dev_err(&client->dev, "irq_domain init failed\n");
goto fail;
@@ -368,15 +368,6 @@
if (status < 0)
goto fail;
- /* NOTE: these chips can issue "some pin-changed" IRQs, which we
- * don't yet even try to use. Among other issues, the relevant
- * genirq state isn't available to modular drivers; and most irq
- * methods can't be called from sleeping contexts.
- */
-
- dev_info(&client->dev, "%s\n",
- client->irq ? " (irq ignored)" : "");
-
/* Let platform code set up the GPIOs and their users.
* Now is the first time anyone could use them.
*/
@@ -388,13 +379,15 @@
dev_warn(&client->dev, "setup --> %d\n", status);
}
+ dev_info(&client->dev, "probed\n");
+
return 0;
fail:
dev_dbg(&client->dev, "probe error %d for '%s'\n",
status, client->name);
- if (pdata && pdata->irq)
+ if (pdata && client->irq)
pcf857x_irq_domain_cleanup(gpio);
kfree(gpio);
@@ -418,7 +411,7 @@
}
}
- if (pdata && pdata->irq)
+ if (pdata && client->irq)
pcf857x_irq_domain_cleanup(gpio);
status = gpiochip_remove(&gpio->chip);
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 4ad0c4f..e3a14fe 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -215,6 +215,7 @@
struct gpio_chip *gpio = &chip->gpio;
gpio->label = dev_name(chip->dev);
+ gpio->dev = chip->dev;
gpio->owner = THIS_MODULE;
gpio->direction_input = pch_gpio_direction_input;
gpio->get = pch_gpio_get;
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index b4b5da4..c1720de 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -48,12 +48,7 @@
#endif
struct pl061_gpio {
- /* Each of the two spinlocks protects a different set of hardware
- * regiters and data structurs. This decouples the code of the IRQ from
- * the GPIO code. This also makes the case of a GPIO routine call from
- * the IRQ code simpler.
- */
- spinlock_t lock; /* GPIO registers */
+ spinlock_t lock;
void __iomem *base;
int irq_base;
@@ -216,39 +211,34 @@
IRQ_GC_INIT_NESTED_LOCK, IRQ_NOREQUEST, 0);
}
-static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
+static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
{
- struct pl061_platform_data *pdata;
+ struct device *dev = &adev->dev;
+ struct pl061_platform_data *pdata = dev->platform_data;
struct pl061_gpio *chip;
int ret, irq, i;
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
- pdata = dev->dev.platform_data;
if (pdata) {
chip->gc.base = pdata->gpio_base;
chip->irq_base = pdata->irq_base;
- } else if (dev->dev.of_node) {
+ } else if (adev->dev.of_node) {
chip->gc.base = -1;
chip->irq_base = 0;
- } else {
- ret = -ENODEV;
- goto free_mem;
- }
+ } else
+ return -ENODEV;
- if (!request_mem_region(dev->res.start,
- resource_size(&dev->res), "pl061")) {
- ret = -EBUSY;
- goto free_mem;
- }
+ if (!devm_request_mem_region(dev, adev->res.start,
+ resource_size(&adev->res), "pl061"))
+ return -EBUSY;
- chip->base = ioremap(dev->res.start, resource_size(&dev->res));
- if (chip->base == NULL) {
- ret = -ENOMEM;
- goto release_region;
- }
+ chip->base = devm_ioremap(dev, adev->res.start,
+ resource_size(&adev->res));
+ if (chip->base == NULL)
+ return -ENOMEM;
spin_lock_init(&chip->lock);
@@ -258,13 +248,13 @@
chip->gc.set = pl061_set_value;
chip->gc.to_irq = pl061_to_irq;
chip->gc.ngpio = PL061_GPIO_NR;
- chip->gc.label = dev_name(&dev->dev);
- chip->gc.dev = &dev->dev;
+ chip->gc.label = dev_name(dev);
+ chip->gc.dev = dev;
chip->gc.owner = THIS_MODULE;
ret = gpiochip_add(&chip->gc);
if (ret)
- goto iounmap;
+ return ret;
/*
* irq_chip support
@@ -276,11 +266,10 @@
pl061_init_gc(chip, chip->irq_base);
writeb(0, chip->base + GPIOIE); /* disable irqs */
- irq = dev->irq[0];
- if (irq < 0) {
- ret = -ENODEV;
- goto iounmap;
- }
+ irq = adev->irq[0];
+ if (irq < 0)
+ return -ENODEV;
+
irq_set_chained_handler(irq, pl061_irq_handler);
irq_set_handler_data(irq, chip);
@@ -294,18 +283,9 @@
}
}
- amba_set_drvdata(dev, chip);
+ amba_set_drvdata(adev, chip);
return 0;
-
-iounmap:
- iounmap(chip->base);
-release_region:
- release_mem_region(dev->res.start, resource_size(&dev->res));
-free_mem:
- kfree(chip);
-
- return ret;
}
#ifdef CONFIG_PM
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
new file mode 100644
index 0000000..5f45fc4
--- /dev/null
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -0,0 +1,217 @@
+/*
+ * SPEAr platform SPI chipselect abstraction over gpiolib
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/* maximum chipselects */
+#define NUM_OF_GPIO 4
+
+/*
+ * Provision is available on some SPEAr SoCs to control ARM PL022 spi cs
+ * through system registers. This register lies outside spi (pl022)
+ * address space into system registers.
+ *
+ * It provides control for spi chip select lines so that any chipselect
+ * (out of 4 possible chipselects in pl022) can be made low to select
+ * the particular slave.
+ */
+
+/**
+ * struct spear_spics - represents spi chip select control
+ * @base: base address
+ * @perip_cfg: configuration register
+ * @sw_enable_bit: bit to enable s/w control over chipselects
+ * @cs_value_bit: bit to program high or low chipselect
+ * @cs_enable_mask: mask to select bits required to select chipselect
+ * @cs_enable_shift: bit pos of cs_enable_mask
+ * @use_count: use count of a spi controller cs lines
+ * @last_off: stores last offset caller of set_value()
+ * @chip: gpio_chip abstraction
+ */
+struct spear_spics {
+ void __iomem *base;
+ u32 perip_cfg;
+ u32 sw_enable_bit;
+ u32 cs_value_bit;
+ u32 cs_enable_mask;
+ u32 cs_enable_shift;
+ unsigned long use_count;
+ int last_off;
+ struct gpio_chip chip;
+};
+
+/* gpio framework specific routines */
+static int spics_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ return -ENXIO;
+}
+
+static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct spear_spics *spics = container_of(chip, struct spear_spics,
+ chip);
+ u32 tmp;
+
+ /* select chip select from register */
+ tmp = readl_relaxed(spics->base + spics->perip_cfg);
+ if (spics->last_off != offset) {
+ spics->last_off = offset;
+ tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift);
+ tmp |= offset << spics->cs_enable_shift;
+ }
+
+ /* toggle chip select line */
+ tmp &= ~(0x1 << spics->cs_value_bit);
+ tmp |= value << spics->cs_value_bit;
+ writel_relaxed(tmp, spics->base + spics->perip_cfg);
+}
+
+static int spics_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return -ENXIO;
+}
+
+static int spics_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ spics_set_value(chip, offset, value);
+ return 0;
+}
+
+static int spics_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct spear_spics *spics = container_of(chip, struct spear_spics,
+ chip);
+ u32 tmp;
+
+ if (!spics->use_count++) {
+ tmp = readl_relaxed(spics->base + spics->perip_cfg);
+ tmp |= 0x1 << spics->sw_enable_bit;
+ tmp |= 0x1 << spics->cs_value_bit;
+ writel_relaxed(tmp, spics->base + spics->perip_cfg);
+ }
+
+ return 0;
+}
+
+static void spics_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct spear_spics *spics = container_of(chip, struct spear_spics,
+ chip);
+ u32 tmp;
+
+ if (!--spics->use_count) {
+ tmp = readl_relaxed(spics->base + spics->perip_cfg);
+ tmp &= ~(0x1 << spics->sw_enable_bit);
+ writel_relaxed(tmp, spics->base + spics->perip_cfg);
+ }
+}
+
+static int spics_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spear_spics *spics;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "invalid IORESOURCE_MEM\n");
+ return -EBUSY;
+ }
+
+ spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
+ if (!spics) {
+ dev_err(&pdev->dev, "memory allocation fail\n");
+ return -ENOMEM;
+ }
+
+ spics->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!spics->base) {
+ dev_err(&pdev->dev, "request and ioremap fail\n");
+ return -ENOMEM;
+ }
+
+ if (of_property_read_u32(np, "st-spics,peripcfg-reg",
+ &spics->perip_cfg))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,sw-enable-bit",
+ &spics->sw_enable_bit))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,cs-value-bit",
+ &spics->cs_value_bit))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,cs-enable-mask",
+ &spics->cs_enable_mask))
+ goto err_dt_data;
+ if (of_property_read_u32(np, "st-spics,cs-enable-shift",
+ &spics->cs_enable_shift))
+ goto err_dt_data;
+
+ platform_set_drvdata(pdev, spics);
+
+ spics->chip.ngpio = NUM_OF_GPIO;
+ spics->chip.base = -1;
+ spics->chip.request = spics_request;
+ spics->chip.free = spics_free;
+ spics->chip.direction_input = spics_direction_input;
+ spics->chip.direction_output = spics_direction_output;
+ spics->chip.get = spics_get_value;
+ spics->chip.set = spics_set_value;
+ spics->chip.label = dev_name(&pdev->dev);
+ spics->chip.dev = &pdev->dev;
+ spics->chip.owner = THIS_MODULE;
+ spics->last_off = -1;
+
+ ret = gpiochip_add(&spics->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpio chip\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "spear spics registered\n");
+ return 0;
+
+err_dt_data:
+ dev_err(&pdev->dev, "DT probe failed\n");
+ return -EINVAL;
+}
+
+static const struct of_device_id spics_gpio_of_match[] = {
+ { .compatible = "st,spear-spics-gpio" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spics_gpio_of_match);
+
+static struct platform_driver spics_gpio_driver = {
+ .probe = spics_gpio_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "spear-spics-gpio",
+ .of_match_table = spics_gpio_of_match,
+ },
+};
+
+static int __init spics_gpio_init(void)
+{
+ return platform_driver_register(&spics_gpio_driver);
+}
+subsys_initcall(spics_gpio_init);
+
+MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index dce3472..3e1d398 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -11,7 +11,9 @@
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/mfd/stmpe.h>
/*
@@ -28,6 +30,7 @@
struct stmpe *stmpe;
struct device *dev;
struct mutex irq_lock;
+ struct irq_domain *domain;
int irq_base;
unsigned norequest_mask;
@@ -103,7 +106,7 @@
{
struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip);
- return stmpe_gpio->irq_base + offset;
+ return irq_create_mapping(stmpe_gpio->domain, offset);
}
static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -132,7 +135,7 @@
static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
- int offset = d->irq - stmpe_gpio->irq_base;
+ int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -199,7 +202,7 @@
static void stmpe_gpio_irq_mask(struct irq_data *d)
{
struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
- int offset = d->irq - stmpe_gpio->irq_base;
+ int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -209,7 +212,7 @@
static void stmpe_gpio_irq_unmask(struct irq_data *d)
{
struct stmpe_gpio *stmpe_gpio = irq_data_get_irq_chip_data(d);
- int offset = d->irq - stmpe_gpio->irq_base;
+ int offset = d->hwirq;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -251,8 +254,9 @@
while (stat) {
int bit = __ffs(stat);
int line = bank * 8 + bit;
+ int virq = irq_find_mapping(stmpe_gpio->domain, line);
- handle_nested_irq(stmpe_gpio->irq_base + line);
+ handle_nested_irq(virq);
stat &= ~(1 << bit);
}
@@ -267,43 +271,61 @@
return IRQ_HANDLED;
}
+int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct stmpe_gpio *stmpe_gpio = d->host_data;
+
+ if (!stmpe_gpio)
+ return -EINVAL;
+
+ irq_set_chip_data(hwirq, stmpe_gpio);
+ irq_set_chip_and_handler(hwirq, &stmpe_gpio_irq_chip,
+ handle_simple_irq);
+ irq_set_nested_thread(hwirq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(hwirq, IRQF_VALID);
+#else
+ irq_set_noprobe(hwirq);
+#endif
+
+ return 0;
+}
+
+void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+#ifdef CONFIG_ARM
+ set_irq_flags(virq, 0);
+#endif
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
+ .unmap = stmpe_gpio_irq_unmap,
+ .map = stmpe_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
{
int base = stmpe_gpio->irq_base;
- int irq;
- for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
- irq_set_chip_data(irq, stmpe_gpio);
- irq_set_chip_and_handler(irq, &stmpe_gpio_irq_chip,
- handle_simple_irq);
- irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- irq_set_noprobe(irq);
-#endif
+ stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ stmpe_gpio->chip.ngpio, base,
+ &stmpe_gpio_irq_simple_ops, stmpe_gpio);
+ if (!stmpe_gpio->domain) {
+ dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
+ return -ENOSYS;
}
return 0;
}
-static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
-{
- int base = stmpe_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
-#ifdef CONFIG_ARM
- set_irq_flags(irq, 0);
-#endif
- irq_set_chip_and_handler(irq, NULL, NULL);
- irq_set_chip_data(irq, NULL);
- }
-}
-
static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_gpio_platform_data *pdata;
struct stmpe_gpio *stmpe_gpio;
int ret;
@@ -321,13 +343,17 @@
stmpe_gpio->dev = &pdev->dev;
stmpe_gpio->stmpe = stmpe;
- stmpe_gpio->norequest_mask = pdata ? pdata->norequest_mask : 0;
-
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+ if (pdata)
+ stmpe_gpio->norequest_mask = pdata->norequest_mask;
+ else if (np)
+ of_property_read_u32(np, "st,norequest-mask",
+ &stmpe_gpio->norequest_mask);
+
if (irq >= 0)
stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
else
@@ -348,7 +374,7 @@
IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
if (ret) {
dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
- goto out_removeirq;
+ goto out_disable;
}
}
@@ -368,9 +394,6 @@
out_freeirq:
if (irq >= 0)
free_irq(irq, stmpe_gpio);
-out_removeirq:
- if (irq >= 0)
- stmpe_gpio_irq_remove(stmpe_gpio);
out_disable:
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
out_free:
@@ -398,10 +421,9 @@
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
- if (irq >= 0) {
+ if (irq >= 0)
free_irq(irq, stmpe_gpio);
- stmpe_gpio_irq_remove(stmpe_gpio);
- }
+
platform_set_drvdata(pdev, NULL);
kfree(stmpe_gpio);
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index 1e48317..8c8447c 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -292,17 +292,15 @@
{
int base = tc3589x_gpio->irq_base;
- if (base) {
- tc3589x_gpio->domain = irq_domain_add_legacy(
- NULL, tc3589x_gpio->chip.ngpio, base,
- 0, &tc3589x_irq_ops, tc3589x_gpio);
- }
- else {
- tc3589x_gpio->domain = irq_domain_add_linear(
- np, tc3589x_gpio->chip.ngpio,
- &tc3589x_irq_ops, tc3589x_gpio);
- }
-
+ /*
+ * If this results in a linear domain, irq_create_mapping() will
+ * take care of allocating IRQ descriptors at runtime. When a base
+ * is provided, the IRQ descriptors will be allocated when the
+ * domain is instantiated.
+ */
+ tc3589x_gpio->domain = irq_domain_add_simple(np,
+ tc3589x_gpio->chip.ngpio, base, &tc3589x_irq_ops,
+ tc3589x_gpio);
if (!tc3589x_gpio->domain) {
dev_err(tc3589x_gpio->dev, "Failed to create irqdomain\n");
return -ENOSYS;
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index d982593..5389be8 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/irqdomain.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pm.h>
#include <asm/mach/irq.h>
@@ -64,7 +65,7 @@
int bank;
int irq;
spinlock_t lvl_lock[4];
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
u32 cnf[4];
u32 out[4];
u32 oe[4];
@@ -109,20 +110,18 @@
{
tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
}
-EXPORT_SYMBOL_GPL(tegra_gpio_enable);
static void tegra_gpio_disable(int gpio)
{
tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
}
-EXPORT_SYMBOL_GPL(tegra_gpio_disable);
-int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
+static int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
{
return pinctrl_request_gpio(offset);
}
-void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
+static void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
{
pinctrl_free_gpio(offset);
tegra_gpio_disable(offset);
@@ -135,6 +134,11 @@
static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
{
+ /* If gpio is in output mode then read from the out value */
+ if ((tegra_gpio_readl(GPIO_OE(offset)) >> GPIO_BIT(offset)) & 1)
+ return (tegra_gpio_readl(GPIO_OUT(offset)) >>
+ GPIO_BIT(offset)) & 0x1;
+
return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
}
@@ -285,8 +289,8 @@
}
-#ifdef CONFIG_PM
-void tegra_gpio_resume(void)
+#ifdef CONFIG_PM_SLEEP
+static int tegra_gpio_resume(struct device *dev)
{
unsigned long flags;
int b;
@@ -308,9 +312,10 @@
}
local_irq_restore(flags);
+ return 0;
}
-void tegra_gpio_suspend(void)
+static int tegra_gpio_suspend(struct device *dev)
{
unsigned long flags;
int b;
@@ -330,6 +335,7 @@
}
}
local_irq_restore(flags);
+ return 0;
}
static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable)
@@ -345,11 +351,15 @@
.irq_mask = tegra_gpio_irq_mask,
.irq_unmask = tegra_gpio_irq_unmask,
.irq_set_type = tegra_gpio_irq_set_type,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.irq_set_wake = tegra_gpio_wake_enable,
#endif
};
+static const struct dev_pm_ops tegra_gpio_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(tegra_gpio_suspend, tegra_gpio_resume)
+};
+
struct tegra_gpio_soc_config {
u32 bank_stride;
u32 upper_offset;
@@ -380,7 +390,6 @@
{
const struct of_device_id *match;
struct tegra_gpio_soc_config *config;
- int irq_base;
struct resource *res;
struct tegra_gpio_bank *bank;
int gpio;
@@ -417,14 +426,11 @@
return -ENODEV;
}
- irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
- if (irq_base < 0) {
- dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
- return -ENODEV;
- }
- irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
- tegra_gpio_chip.ngpio, irq_base, 0,
+ irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+ tegra_gpio_chip.ngpio,
&irq_domain_simple_ops, NULL);
+ if (!irq_domain)
+ return -ENODEV;
for (i = 0; i < tegra_gpio_bank_count; i++) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
@@ -464,7 +470,7 @@
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
- int irq = irq_find_mapping(irq_domain, gpio);
+ int irq = irq_create_mapping(irq_domain, gpio);
/* No validity check; all Tegra GPIOs are valid IRQs */
bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
@@ -493,6 +499,7 @@
.driver = {
.name = "tegra-gpio",
.owner = THIS_MODULE,
+ .pm = &tegra_gpio_pm_ops,
.of_match_table = tegra_gpio_of_match,
},
.probe = tegra_gpio_probe,
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
new file mode 100644
index 0000000..0634cee
--- /dev/null
+++ b/drivers/gpio/gpio-ts5500.c
@@ -0,0 +1,466 @@
+/*
+ * Digital I/O driver for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * Technologic Systems platforms have pin blocks, exposing several Digital
+ * Input/Output lines (DIO). This driver aims to support single pin blocks.
+ * In that sense, the support is not limited to the TS-5500 blocks.
+ * Actually, the following platforms have DIO support:
+ *
+ * TS-5500:
+ * Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ * Blocks: DIO1, DIO2 and LCD port.
+ *
+ * TS-5600:
+ * Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ * Blocks: LCD port (identical to TS-5500 LCD).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/gpio-ts5500.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* List of supported Technologic Systems platforms DIO blocks */
+enum ts5500_blocks { TS5500_DIO1, TS5500_DIO2, TS5500_LCD, TS5600_LCD };
+
+struct ts5500_priv {
+ const struct ts5500_dio *pinout;
+ struct gpio_chip gpio_chip;
+ spinlock_t lock;
+ bool strap;
+ u8 hwirq;
+};
+
+/*
+ * Hex 7D is used to control several blocks (e.g. DIO2 and LCD port).
+ * This flag ensures that the region has been requested by this driver.
+ */
+static bool hex7d_reserved;
+
+/*
+ * This structure is used to describe capabilities of DIO lines,
+ * such as available directions and connected interrupt (if any).
+ */
+struct ts5500_dio {
+ const u8 value_addr;
+ const u8 value_mask;
+ const u8 control_addr;
+ const u8 control_mask;
+ const bool no_input;
+ const bool no_output;
+ const u8 irq;
+};
+
+#define TS5500_DIO_IN_OUT(vaddr, vbit, caddr, cbit) \
+ { \
+ .value_addr = vaddr, \
+ .value_mask = BIT(vbit), \
+ .control_addr = caddr, \
+ .control_mask = BIT(cbit), \
+ }
+
+#define TS5500_DIO_IN(addr, bit) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_output = true, \
+ }
+
+#define TS5500_DIO_IN_IRQ(addr, bit, _irq) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_output = true, \
+ .irq = _irq, \
+ }
+
+#define TS5500_DIO_OUT(addr, bit) \
+ { \
+ .value_addr = addr, \
+ .value_mask = BIT(bit), \
+ .no_input = true, \
+ }
+
+/*
+ * Input/Output DIO lines are programmed in groups of 4. Their values are
+ * available through 4 consecutive bits in a value port, whereas the direction
+ * of these 4 lines is driven by only 1 bit in a control port.
+ */
+#define TS5500_DIO_GROUP(vaddr, vbitfrom, caddr, cbit) \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 0, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 1, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 2, caddr, cbit), \
+ TS5500_DIO_IN_OUT(vaddr, vbitfrom + 3, caddr, cbit)
+
+/*
+ * TS-5500 DIO1 block
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x7b 0 0x7a 0 x x DIO1_0 1 0
+ * 0x7b 1 0x7a 0 x x DIO1_1 3 1
+ * 0x7b 2 0x7a 0 x x DIO1_2 5 2
+ * 0x7b 3 0x7a 0 x x DIO1_3 7 3
+ * 0x7b 4 0x7a 1 x x DIO1_4 9 4
+ * 0x7b 5 0x7a 1 x x DIO1_5 11 5
+ * 0x7b 6 0x7a 1 x x DIO1_6 13 6
+ * 0x7b 7 0x7a 1 x x DIO1_7 15 7
+ * 0x7c 0 0x7a 5 x x DIO1_8 4 8
+ * 0x7c 1 0x7a 5 x x DIO1_9 6 9
+ * 0x7c 2 0x7a 5 x x DIO1_10 8 10
+ * 0x7c 3 0x7a 5 x x DIO1_11 10 11
+ * 0x7c 4 x DIO1_12 12 12
+ * 0x7c 5 x 7 DIO1_13 14 13
+ */
+static const struct ts5500_dio ts5500_dio1[] = {
+ TS5500_DIO_GROUP(0x7b, 0, 0x7a, 0),
+ TS5500_DIO_GROUP(0x7b, 4, 0x7a, 1),
+ TS5500_DIO_GROUP(0x7c, 0, 0x7a, 5),
+ TS5500_DIO_IN(0x7c, 4),
+ TS5500_DIO_IN_IRQ(0x7c, 5, 7),
+};
+
+/*
+ * TS-5500 DIO2 block
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x7e 0 0x7d 0 x x DIO2_0 1 0
+ * 0x7e 1 0x7d 0 x x DIO2_1 3 1
+ * 0x7e 2 0x7d 0 x x DIO2_2 5 2
+ * 0x7e 3 0x7d 0 x x DIO2_3 7 3
+ * 0x7e 4 0x7d 1 x x DIO2_4 9 4
+ * 0x7e 5 0x7d 1 x x DIO2_5 11 5
+ * 0x7e 6 0x7d 1 x x DIO2_6 13 6
+ * 0x7e 7 0x7d 1 x x DIO2_7 15 7
+ * 0x7f 0 0x7d 5 x x DIO2_8 4 8
+ * 0x7f 1 0x7d 5 x x DIO2_9 6 9
+ * 0x7f 2 0x7d 5 x x DIO2_10 8 10
+ * 0x7f 3 0x7d 5 x x DIO2_11 10 11
+ * 0x7f 4 x 6 DIO2_13 14 12
+ */
+static const struct ts5500_dio ts5500_dio2[] = {
+ TS5500_DIO_GROUP(0x7e, 0, 0x7d, 0),
+ TS5500_DIO_GROUP(0x7e, 4, 0x7d, 1),
+ TS5500_DIO_GROUP(0x7f, 0, 0x7d, 5),
+ TS5500_DIO_IN_IRQ(0x7f, 4, 6),
+};
+
+/*
+ * TS-5500 LCD port used as DIO block
+ * TS-5600 LCD port is identical
+ *
+ * value control dir hw
+ * addr bit addr bit in out irq name pin offset
+ *
+ * 0x72 0 0x7d 2 x x LCD_0 8 0
+ * 0x72 1 0x7d 2 x x LCD_1 7 1
+ * 0x72 2 0x7d 2 x x LCD_2 10 2
+ * 0x72 3 0x7d 2 x x LCD_3 9 3
+ * 0x72 4 0x7d 3 x x LCD_4 12 4
+ * 0x72 5 0x7d 3 x x LCD_5 11 5
+ * 0x72 6 0x7d 3 x x LCD_6 14 6
+ * 0x72 7 0x7d 3 x x LCD_7 13 7
+ * 0x73 0 x LCD_EN 5 8
+ * 0x73 6 x LCD_WR 6 9
+ * 0x73 7 x 1 LCD_RS 3 10
+ */
+static const struct ts5500_dio ts5500_lcd[] = {
+ TS5500_DIO_GROUP(0x72, 0, 0x7d, 2),
+ TS5500_DIO_GROUP(0x72, 4, 0x7d, 3),
+ TS5500_DIO_OUT(0x73, 0),
+ TS5500_DIO_IN(0x73, 6),
+ TS5500_DIO_IN_IRQ(0x73, 7, 1),
+};
+
+static inline struct ts5500_priv *ts5500_gc_to_priv(struct gpio_chip *chip)
+{
+ return container_of(chip, struct ts5500_priv, gpio_chip);
+}
+
+static inline void ts5500_set_mask(u8 mask, u8 addr)
+{
+ u8 val = inb(addr);
+ val |= mask;
+ outb(val, addr);
+}
+
+static inline void ts5500_clear_mask(u8 mask, u8 addr)
+{
+ u8 val = inb(addr);
+ val &= ~mask;
+ outb(val, addr);
+}
+
+static int ts5500_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ if (line.no_input)
+ return -ENXIO;
+
+ if (line.no_output)
+ return 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ts5500_clear_mask(line.control_mask, line.control_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int ts5500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+
+ return !!(inb(line.value_addr) & line.value_mask);
+}
+
+static int ts5500_gpio_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ if (line.no_output)
+ return -ENXIO;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!line.no_input)
+ ts5500_set_mask(line.control_mask, line.control_addr);
+
+ if (val)
+ ts5500_set_mask(line.value_mask, line.value_addr);
+ else
+ ts5500_clear_mask(line.value_mask, line.value_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void ts5500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio line = priv->pinout[offset];
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (val)
+ ts5500_set_mask(line.value_mask, line.value_addr);
+ else
+ ts5500_clear_mask(line.value_mask, line.value_addr);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ts5500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct ts5500_priv *priv = ts5500_gc_to_priv(chip);
+ const struct ts5500_dio *block = priv->pinout;
+ const struct ts5500_dio line = block[offset];
+
+ /* Only one pin is connected to an interrupt */
+ if (line.irq)
+ return line.irq;
+
+ /* As this pin is input-only, we may strap it to another in/out pin */
+ if (priv->strap)
+ return priv->hwirq;
+
+ return -ENXIO;
+}
+
+static int ts5500_enable_irq(struct ts5500_priv *priv)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->hwirq == 7)
+ ts5500_set_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+ else if (priv->hwirq == 6)
+ ts5500_set_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+ else if (priv->hwirq == 1)
+ ts5500_set_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+ else
+ ret = -EINVAL;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+}
+
+static void ts5500_disable_irq(struct ts5500_priv *priv)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->hwirq == 7)
+ ts5500_clear_mask(BIT(7), 0x7a); /* DIO1_13 on IRQ7 */
+ else if (priv->hwirq == 6)
+ ts5500_clear_mask(BIT(7), 0x7d); /* DIO2_13 on IRQ6 */
+ else if (priv->hwirq == 1)
+ ts5500_clear_mask(BIT(6), 0x7d); /* LCD_RS on IRQ1 */
+ else
+ dev_err(priv->gpio_chip.dev, "invalid hwirq %d\n", priv->hwirq);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int __devinit ts5500_dio_probe(struct platform_device *pdev)
+{
+ enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data;
+ struct ts5500_dio_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ const char *name = dev_name(dev);
+ struct ts5500_priv *priv;
+ struct resource *res;
+ unsigned long flags;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(dev, "missing IRQ resource\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+ priv->hwirq = res->start;
+ spin_lock_init(&priv->lock);
+
+ priv->gpio_chip.owner = THIS_MODULE;
+ priv->gpio_chip.label = name;
+ priv->gpio_chip.dev = dev;
+ priv->gpio_chip.direction_input = ts5500_gpio_input;
+ priv->gpio_chip.direction_output = ts5500_gpio_output;
+ priv->gpio_chip.get = ts5500_gpio_get;
+ priv->gpio_chip.set = ts5500_gpio_set;
+ priv->gpio_chip.to_irq = ts5500_gpio_to_irq;
+ priv->gpio_chip.base = -1;
+ if (pdata) {
+ priv->gpio_chip.base = pdata->base;
+ priv->strap = pdata->strap;
+ }
+
+ switch (block) {
+ case TS5500_DIO1:
+ priv->pinout = ts5500_dio1;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio1);
+
+ if (!devm_request_region(dev, 0x7a, 3, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+ break;
+ case TS5500_DIO2:
+ priv->pinout = ts5500_dio2;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_dio2);
+
+ if (!devm_request_region(dev, 0x7e, 2, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+
+ if (hex7d_reserved)
+ break;
+
+ if (!devm_request_region(dev, 0x7d, 1, name)) {
+ dev_err(dev, "failed to request %s 7D\n", name);
+ return -EBUSY;
+ }
+
+ hex7d_reserved = true;
+ break;
+ case TS5500_LCD:
+ case TS5600_LCD:
+ priv->pinout = ts5500_lcd;
+ priv->gpio_chip.ngpio = ARRAY_SIZE(ts5500_lcd);
+
+ if (!devm_request_region(dev, 0x72, 2, name)) {
+ dev_err(dev, "failed to request %s ports\n", name);
+ return -EBUSY;
+ }
+
+ if (!hex7d_reserved) {
+ if (!devm_request_region(dev, 0x7d, 1, name)) {
+ dev_err(dev, "failed to request %s 7D\n", name);
+ return -EBUSY;
+ }
+
+ hex7d_reserved = true;
+ }
+
+ /* Ensure usage of LCD port as DIO */
+ spin_lock_irqsave(&priv->lock, flags);
+ ts5500_clear_mask(BIT(4), 0x7d);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ }
+
+ ret = gpiochip_add(&priv->gpio_chip);
+ if (ret) {
+ dev_err(dev, "failed to register the gpio chip\n");
+ return ret;
+ }
+
+ ret = ts5500_enable_irq(priv);
+ if (ret) {
+ dev_err(dev, "invalid interrupt %d\n", priv->hwirq);
+ goto cleanup;
+ }
+
+ return 0;
+cleanup:
+ if (gpiochip_remove(&priv->gpio_chip))
+ dev_err(dev, "failed to remove gpio chip\n");
+ return ret;
+}
+
+static int __devexit ts5500_dio_remove(struct platform_device *pdev)
+{
+ struct ts5500_priv *priv = platform_get_drvdata(pdev);
+
+ ts5500_disable_irq(priv);
+ return gpiochip_remove(&priv->gpio_chip);
+}
+
+static struct platform_device_id ts5500_dio_ids[] = {
+ { "ts5500-dio1", TS5500_DIO1 },
+ { "ts5500-dio2", TS5500_DIO2 },
+ { "ts5500-dio-lcd", TS5500_LCD },
+ { "ts5600-dio-lcd", TS5600_LCD },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, ts5500_dio_ids);
+
+static struct platform_driver ts5500_dio_driver = {
+ .driver = {
+ .name = "ts5500-dio",
+ .owner = THIS_MODULE,
+ },
+ .probe = ts5500_dio_probe,
+ .remove = __devexit_p(ts5500_dio_remove),
+ .id_table = ts5500_dio_ids,
+};
+
+module_platform_driver(ts5500_dio_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>");
+MODULE_DESCRIPTION("Technologic Systems TS-5500 Digital I/O driver");
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index c5f8ca2..d2138b0 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -88,11 +88,15 @@
/*----------------------------------------------------------------------*/
/*
- * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB}))
+ * LED register offsets from TWL_MODULE_LED base
* PWMs A and B are dedicated to LEDs A and B, respectively.
*/
-#define TWL4030_LED_LEDEN 0x0
+#define TWL4030_LED_LEDEN_REG 0x00
+#define TWL4030_PWMAON_REG 0x01
+#define TWL4030_PWMAOFF_REG 0x02
+#define TWL4030_PWMBON_REG 0x03
+#define TWL4030_PWMBOFF_REG 0x04
/* LEDEN bits */
#define LEDEN_LEDAON BIT(0)
@@ -104,9 +108,6 @@
#define LEDEN_PWM_LENGTHA BIT(6)
#define LEDEN_PWM_LENGTHB BIT(7)
-#define TWL4030_PWMx_PWMxON 0x0
-#define TWL4030_PWMx_PWMxOFF 0x1
-
#define PWMxON_LENGTH BIT(7)
/*----------------------------------------------------------------------*/
@@ -145,7 +146,7 @@
else
cached_leden |= mask;
status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
- TWL4030_LED_LEDEN);
+ TWL4030_LED_LEDEN_REG);
mutex_unlock(&gpio_lock);
}
@@ -216,33 +217,33 @@
if (offset >= TWL4030_GPIO_MAX) {
u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
| LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
- u8 module = TWL4030_MODULE_PWMA;
+ u8 reg = TWL4030_PWMAON_REG;
offset -= TWL4030_GPIO_MAX;
if (offset) {
ledclr_mask <<= 1;
- module = TWL4030_MODULE_PWMB;
+ reg = TWL4030_PWMBON_REG;
}
/* initialize PWM to always-drive */
- status = twl_i2c_write_u8(module, 0x7f,
- TWL4030_PWMx_PWMxOFF);
+ /* Configure PWM OFF register first */
+ status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1);
if (status < 0)
goto done;
- status = twl_i2c_write_u8(module, 0x7f,
- TWL4030_PWMx_PWMxON);
+
+ /* Followed by PWM ON register */
+ status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg);
if (status < 0)
goto done;
/* init LED to not-driven (high) */
- module = TWL4030_MODULE_LED;
- status = twl_i2c_read_u8(module, &cached_leden,
- TWL4030_LED_LEDEN);
+ status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden,
+ TWL4030_LED_LEDEN_REG);
if (status < 0)
goto done;
cached_leden &= ~ledclr_mask;
- status = twl_i2c_write_u8(module, cached_leden,
- TWL4030_LED_LEDEN);
+ status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
+ TWL4030_LED_LEDEN_REG);
if (status < 0)
goto done;
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
index bcd8e4a..9ed2a2b 100644
--- a/drivers/gpio/gpio-vt8500.c
+++ b/drivers/gpio/gpio-vt8500.c
@@ -96,6 +96,7 @@
VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
+ VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
},
};
@@ -115,6 +116,7 @@
VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
+ VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6),
},
};
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 58b9838..199fca1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -191,6 +191,32 @@
return ret;
}
+/* caller ensures gpio is valid and requested, chip->get_direction may sleep */
+static int gpio_get_direction(unsigned gpio)
+{
+ struct gpio_chip *chip;
+ struct gpio_desc *desc = &gpio_desc[gpio];
+ int status = -EINVAL;
+
+ chip = gpio_to_chip(gpio);
+ gpio -= chip->base;
+
+ if (!chip->get_direction)
+ return status;
+
+ status = chip->get_direction(chip, gpio);
+ if (status > 0) {
+ /* GPIOF_DIR_IN, or other positive */
+ status = 1;
+ clear_bit(FLAG_IS_OUT, &desc->flags);
+ }
+ if (status == 0) {
+ /* GPIOF_DIR_OUT */
+ set_bit(FLAG_IS_OUT, &desc->flags);
+ }
+ return status;
+}
+
#ifdef CONFIG_GPIO_SYSFS
/* lock protects against unexport_gpio() being called while
@@ -223,6 +249,7 @@
struct device_attribute *attr, char *buf)
{
const struct gpio_desc *desc = dev_get_drvdata(dev);
+ unsigned gpio = desc - gpio_desc;
ssize_t status;
mutex_lock(&sysfs_lock);
@@ -230,6 +257,7 @@
if (!test_bit(FLAG_EXPORT, &desc->flags))
status = -EIO;
else
+ gpio_get_direction(gpio);
status = sprintf(buf, "%s\n",
test_bit(FLAG_IS_OUT, &desc->flags)
? "out" : "in");
@@ -704,8 +732,9 @@
{
unsigned long flags;
struct gpio_desc *desc;
- int status = -EINVAL;
+ int status;
const char *ioname = NULL;
+ struct device *dev;
/* can't export until sysfs is available ... */
if (!gpio_class.p) {
@@ -713,59 +742,66 @@
return -ENOENT;
}
- if (!gpio_is_valid(gpio))
- goto done;
+ if (!gpio_is_valid(gpio)) {
+ pr_debug("%s: gpio %d is not valid\n", __func__, gpio);
+ return -EINVAL;
+ }
mutex_lock(&sysfs_lock);
spin_lock_irqsave(&gpio_lock, flags);
desc = &gpio_desc[gpio];
- if (test_bit(FLAG_REQUESTED, &desc->flags)
- && !test_bit(FLAG_EXPORT, &desc->flags)) {
- status = 0;
- if (!desc->chip->direction_input
- || !desc->chip->direction_output)
- direction_may_change = false;
+ if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
+ test_bit(FLAG_EXPORT, &desc->flags)) {
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ pr_debug("%s: gpio %d unavailable (requested=%d, exported=%d)\n",
+ __func__, gpio,
+ test_bit(FLAG_REQUESTED, &desc->flags),
+ test_bit(FLAG_EXPORT, &desc->flags));
+ status = -EPERM;
+ goto fail_unlock;
}
+
+ if (!desc->chip->direction_input || !desc->chip->direction_output)
+ direction_may_change = false;
spin_unlock_irqrestore(&gpio_lock, flags);
if (desc->chip->names && desc->chip->names[gpio - desc->chip->base])
ioname = desc->chip->names[gpio - desc->chip->base];
- if (status == 0) {
- struct device *dev;
-
- dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%u", gpio);
- if (!IS_ERR(dev)) {
- status = sysfs_create_group(&dev->kobj,
- &gpio_attr_group);
-
- if (!status && direction_may_change)
- status = device_create_file(dev,
- &dev_attr_direction);
-
- if (!status && gpio_to_irq(gpio) >= 0
- && (direction_may_change
- || !test_bit(FLAG_IS_OUT,
- &desc->flags)))
- status = device_create_file(dev,
- &dev_attr_edge);
-
- if (status != 0)
- device_unregister(dev);
- } else
- status = PTR_ERR(dev);
- if (status == 0)
- set_bit(FLAG_EXPORT, &desc->flags);
+ dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
+ desc, ioname ? ioname : "gpio%u", gpio);
+ if (IS_ERR(dev)) {
+ status = PTR_ERR(dev);
+ goto fail_unlock;
}
- mutex_unlock(&sysfs_lock);
-
-done:
+ status = sysfs_create_group(&dev->kobj, &gpio_attr_group);
if (status)
- pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
+ goto fail_unregister_device;
+ if (direction_may_change) {
+ status = device_create_file(dev, &dev_attr_direction);
+ if (status)
+ goto fail_unregister_device;
+ }
+
+ if (gpio_to_irq(gpio) >= 0 && (direction_may_change ||
+ !test_bit(FLAG_IS_OUT, &desc->flags))) {
+ status = device_create_file(dev, &dev_attr_edge);
+ if (status)
+ goto fail_unregister_device;
+ }
+
+ set_bit(FLAG_EXPORT, &desc->flags);
+ mutex_unlock(&sysfs_lock);
+ return 0;
+
+fail_unregister_device:
+ device_unregister(dev);
+fail_unlock:
+ mutex_unlock(&sysfs_lock);
+ pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
return status;
}
EXPORT_SYMBOL_GPL(gpio_export);
@@ -1075,6 +1111,7 @@
* inputs (often with pullups enabled) so power
* usage is minimized. Linux code should set the
* gpio direction first thing; but until it does,
+ * and in case chip->get_direction is not set,
* we may expose the wrong direction in sysfs.
*/
gpio_desc[id].flags = !chip->direction_input
@@ -1304,9 +1341,15 @@
desc_set_label(desc, NULL);
module_put(chip->owner);
clear_bit(FLAG_REQUESTED, &desc->flags);
+ goto done;
}
}
-
+ if (chip->get_direction) {
+ /* chip->get_direction may sleep */
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ gpio_get_direction(gpio);
+ spin_lock_irqsave(&gpio_lock, flags);
+ }
done:
if (status)
pr_debug("gpio_request: gpio-%d (%s) status %d\n",
@@ -1842,6 +1885,7 @@
if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
continue;
+ gpio_get_direction(gpio);
is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
seq_printf(s, " gpio-%-3d (%-20.20s) %s %s",
gpio, gdesc->label,
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index c94f521..79e88d1 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -294,12 +294,14 @@
static struct mfd_cell stmpe_gpio_cell = {
.name = "stmpe-gpio",
+ .of_compatible = "st,stmpe-gpio",
.resources = stmpe_gpio_resources,
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
};
static struct mfd_cell stmpe_gpio_cell_noirq = {
.name = "stmpe-gpio",
+ .of_compatible = "st,stmpe-gpio",
/* gpio cell resources consist of an irq only so no resources here */
};
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 9fd3093..20ca766 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -57,6 +57,8 @@
* enabling module power and clock; may sleep
* @free: optional hook for chip-specific deactivation, such as
* disabling module power and clock; may sleep
+ * @get_direction: returns direction for signal "offset", 0=out, 1=in,
+ * (same as GPIOF_DIR_XXX), or negative error
* @direction_input: configures signal "offset" as input, or returns error
* @get: returns value for signal "offset"; for output signals this
* returns either the value actually sensed, or zero
@@ -101,7 +103,8 @@
unsigned offset);
void (*free)(struct gpio_chip *chip,
unsigned offset);
-
+ int (*get_direction)(struct gpio_chip *chip,
+ unsigned offset);
int (*direction_input)(struct gpio_chip *chip,
unsigned offset);
int (*get)(struct gpio_chip *chip,
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
index 781e6bd..0767a2a 100644
--- a/include/linux/i2c/pcf857x.h
+++ b/include/linux/i2c/pcf857x.h
@@ -10,7 +10,6 @@
* @setup: optional callback issued once the GPIOs are valid
* @teardown: optional callback issued before the GPIOs are invalidated
* @context: optional parameter passed to setup() and teardown()
- * @irq: optional interrupt number
*
* In addition to the I2C_BOARD_INFO() state appropriate to each chip,
* the i2c_board_info used with the pcf875x driver must provide its
@@ -40,8 +39,6 @@
int gpio, unsigned ngpio,
void *context);
void *context;
-
- int irq;
};
#endif /* __LINUX_PCF857X_H */
diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h
new file mode 100644
index 0000000..b10d11c
--- /dev/null
+++ b/include/linux/platform_data/gpio-ts5500.h
@@ -0,0 +1,27 @@
+/*
+ * GPIO (DIO) header for Technologic Systems TS-5500
+ *
+ * Copyright (c) 2012 Savoir-faire Linux Inc.
+ * Vivien Didelot <vivien.didelot@savoirfairelinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PDATA_GPIO_TS5500_H
+#define _PDATA_GPIO_TS5500_H
+
+/**
+ * struct ts5500_dio_platform_data - TS-5500 pin block configuration
+ * @base: The GPIO base number to use.
+ * @strap: The only pin connected to an interrupt in a block is input-only.
+ * If you need a bidirectional line which can trigger an IRQ, you
+ * may strap it with an in/out pin. This flag indicates this case.
+ */
+struct ts5500_dio_platform_data {
+ int base;
+ bool strap;
+};
+
+#endif /* _PDATA_GPIO_TS5500_H */