[WATCHDOG] s3c2410 watchdog power management
Patch from Dimitry Andric <dimitry.andric@tomtom.com>, updated
by Ben Dooks <ben-linux@fluff.org>. Patch is against 2.6.11-mm2
Add power management support to the s3c2410 watchdog, so that
it is shut-down over suspend, and re-initialised on resume.
Also add Dimitry to the list of authors.
Signed-off-by: Dimitry Andric <dimitry.andric@tomtom.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index f85ac89..52243578 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -27,7 +27,9 @@
* Fixed tmr_count / wdt_count confusion
* Added configurable debug
*
- * 11-Jan-2004 BJD Fixed divide-by-2 in timeout code
+ * 11-Jan-2005 BJD Fixed divide-by-2 in timeout code
+ *
+ * 25-Jan-2005 DA Added suspend/resume support
*
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
@@ -479,15 +481,57 @@
return 0;
}
+#ifdef CONFIG_PM
+
+static unsigned long wtcon_save;
+static unsigned long wtdat_save;
+
+static int s3c2410wdt_suspend(struct device *dev, u32 state, u32 level)
+{
+ if (level == SUSPEND_POWER_DOWN) {
+ /* Save watchdog state, and turn it off. */
+ wtcon_save = readl(wdt_base + S3C2410_WTCON);
+ wtdat_save = readl(wdt_base + S3C2410_WTDAT);
+
+ /* Note that WTCNT doesn't need to be saved. */
+ s3c2410wdt_stop();
+ }
+
+ return 0;
+}
+
+static int s3c2410wdt_resume(struct device *dev, u32 level)
+{
+ if (level == RESUME_POWER_ON) {
+ /* Restore watchdog state. */
+
+ writel(wtdat_save, wdt_base + S3C2410_WTDAT);
+ writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
+ writel(wtcon_save, wdt_base + S3C2410_WTCON);
+
+ printk(KERN_INFO PFX "watchdog %sabled\n",
+ (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
+ }
+
+ return 0;
+}
+
+#else
+#define s3c2410wdt_suspend NULL
+#define s3c2410wdt_resume NULL
+#endif /* CONFIG_PM */
+
+
static struct device_driver s3c2410wdt_driver = {
.name = "s3c2410-wdt",
.bus = &platform_bus_type,
.probe = s3c2410wdt_probe,
.remove = s3c2410wdt_remove,
+ .suspend = s3c2410wdt_suspend,
+ .resume = s3c2410wdt_resume,
};
-
static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n";
static int __init watchdog_init(void)
@@ -505,7 +549,8 @@
module_init(watchdog_init);
module_exit(watchdog_exit);
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
+ "Dimitry Andric <dimitry.andric@tomtom.com>");
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);