tree e95098d113f040f9eb497965b8285d10a6b59ab9
parent 315980c8688c4b06713c1a5fe9d64cdf8ab57a72
author Namhyung Kim <namhyung@gmail.com> 1306436810 +0200
committer Jens Axboe <jaxboe@fusionio.com> 1306436810 +0200

brd: handle on-demand devices correctly

When finding or allocating a ram disk device, brd_probe() did not take
partition numbers into account so that it can result to a different
device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4
for simplicity) :

$ sudo modprobe brd max_part=15
$ ls -l /dev/ram*
brw-rw---- 1 root disk 1,  0 2011-05-25 15:41 /dev/ram0
brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1
brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2
brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3
$ sudo mknod /dev/ram4 b 1 64
$ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256
256+0 records in
256+0 records out
1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s
namhyung@leonhard:linux$ ls -l /dev/ram*
brw-rw---- 1 root disk 1,    0 2011-05-25 15:41 /dev/ram0
brw-rw---- 1 root disk 1,   16 2011-05-25 15:41 /dev/ram1
brw-rw---- 1 root disk 1,   32 2011-05-25 15:41 /dev/ram2
brw-rw---- 1 root disk 1,   48 2011-05-25 15:41 /dev/ram3
brw-r--r-- 1 root root 1,   64 2011-05-25 15:45 /dev/ram4
brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64

After this patch, /dev/ram4 - instead of /dev/ram64 - was
accessed correctly.

In addition, 'range' passed to blk_register_region() should
include all range of dev_t that RAMDISK_MAJOR can address.
It does not need to be limited by partition numbers unless
'rd_nr' param was specified.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Laurent Vivier <Laurent.Vivier@bull.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>