[PATCH] ext3 and jbd cleanup: remove whitespace
Remove whitespace from ext3 and jbd, before we clone ext4.
Signed-off-by: Mingming Cao<cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 063d994..e6b9837 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -74,7 +74,7 @@
}
/*
- * Read the bitmap for a given block_group, reading into the specified
+ * Read the bitmap for a given block_group, reading into the specified
* slot in the superblock's bitmap cache.
*
* Return buffer_head on success or NULL in case of failure.
@@ -419,8 +419,8 @@
}
/* @@@ This prevents newly-allocated data from being
* freed and then reallocated within the same
- * transaction.
- *
+ * transaction.
+ *
* Ideally we would want to allow that to happen, but to
* do so requires making journal_forget() capable of
* revoking the queued write of a data block, which
@@ -433,7 +433,7 @@
* safe not to set the allocation bit in the committed
* bitmap, because we know that there is no outstanding
* activity on the buffer any more and so it is safe to
- * reallocate it.
+ * reallocate it.
*/
BUFFER_TRACE(bitmap_bh, "set in b_committed_data");
J_ASSERT_BH(bitmap_bh,
@@ -518,7 +518,7 @@
* data would allow the old block to be overwritten before the
* transaction committed (because we force data to disk before commit).
* This would lead to corruption if we crashed between overwriting the
- * data and committing the delete.
+ * data and committing the delete.
*
* @@@ We may want to make this allocation behaviour conditional on
* data-writes at some point, and disable it for metadata allocations or
@@ -584,7 +584,7 @@
if (start > 0) {
/*
- * The goal was occupied; search forward for a free
+ * The goal was occupied; search forward for a free
* block within the next XX blocks.
*
* end_goal is more or less random, but it has to be
@@ -1194,7 +1194,7 @@
/*
* ext3_new_block uses a goal block to assist allocation. If the goal is
* free, or there is a free block within 32 blocks of the goal, that block
- * is allocated. Otherwise a forward search is made for a free block; within
+ * is allocated. Otherwise a forward search is made for a free block; within
* each block group the search first looks for an entire free byte in the block
* bitmap, and then for any free bit if that fails.
* This function also updates quota and i_blocks field.
@@ -1303,7 +1303,7 @@
smp_rmb();
/*
- * Now search the rest of the groups. We assume that
+ * Now search the rest of the groups. We assume that
* i and gdp correctly point to the last group visited.
*/
for (bgi = 0; bgi < ngroups; bgi++) {
diff --git a/fs/ext3/bitmap.c b/fs/ext3/bitmap.c
index ce4f82b..b9176ee 100644
--- a/fs/ext3/bitmap.c
+++ b/fs/ext3/bitmap.c
@@ -20,7 +20,7 @@
unsigned int i;
unsigned long sum = 0;
- if (!map)
+ if (!map)
return (0);
for (i = 0; i < numchars; i++)
sum += nibblemap[map->b_data[i] & 0xf] +
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index fbb0d4e..6f9e5a5 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -59,7 +59,7 @@
return (ext3_filetype_table[filetype]);
}
-
+
int ext3_check_dir_entry (const char * function, struct inode * dir,
struct ext3_dir_entry_2 * de,
@@ -162,7 +162,7 @@
* to make sure. */
if (filp->f_version != inode->i_version) {
for (i = 0; i < sb->s_blocksize && i < offset; ) {
- de = (struct ext3_dir_entry_2 *)
+ de = (struct ext3_dir_entry_2 *)
(bh->b_data + i);
/* It's too expensive to do a full
* dirent test each time round this
@@ -181,7 +181,7 @@
filp->f_version = inode->i_version;
}
- while (!error && filp->f_pos < inode->i_size
+ while (!error && filp->f_pos < inode->i_size
&& offset < sb->s_blocksize) {
de = (struct ext3_dir_entry_2 *) (bh->b_data + offset);
if (!ext3_check_dir_entry ("ext3_readdir", inode, de,
@@ -229,7 +229,7 @@
/*
* These functions convert from the major/minor hash to an f_pos
* value.
- *
+ *
* Currently we only use major hash numer. This is unfortunate, but
* on 32-bit machines, the same VFS interface is used for lseek and
* llseek, so if we use the 64 bit offset, then the 32-bit versions of
@@ -250,7 +250,7 @@
struct fname {
__u32 hash;
__u32 minor_hash;
- struct rb_node rb_hash;
+ struct rb_node rb_hash;
struct fname *next;
__u32 inode;
__u8 name_len;
@@ -410,7 +410,7 @@
curr_pos = hash2pos(fname->hash, fname->minor_hash);
while (fname) {
error = filldir(dirent, fname->name,
- fname->name_len, curr_pos,
+ fname->name_len, curr_pos,
fname->inode,
get_dtype(sb, fname->file_type));
if (error) {
@@ -465,7 +465,7 @@
/*
* Fill the rbtree if we have no more entries,
* or the inode has changed since we last read in the
- * cached entries.
+ * cached entries.
*/
if ((!info->curr_node) ||
(filp->f_version != inode->i_version)) {
diff --git a/fs/ext3/file.c b/fs/ext3/file.c
index 1efefb6..994efd1 100644
--- a/fs/ext3/file.c
+++ b/fs/ext3/file.c
@@ -100,7 +100,7 @@
force_commit:
err = ext3_force_commit(inode->i_sb);
- if (err)
+ if (err)
return err;
return ret;
}
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index 49382a2..dd1fd3c 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -8,14 +8,14 @@
* Universite Pierre et Marie Curie (Paris VI)
* from
* linux/fs/minix/truncate.c Copyright (C) 1991, 1992 Linus Torvalds
- *
+ *
* ext3fs fsync primitive
*
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
- *
+ *
* Removed unnecessary code duplication for little endian machines
- * and excessive __inline__s.
+ * and excessive __inline__s.
* Andi Kleen, 1997
*
* Major simplications and cleanup - we only need to do the metadata, because
diff --git a/fs/ext3/hash.c b/fs/ext3/hash.c
index 5a2d123..7fa637c 100644
--- a/fs/ext3/hash.c
+++ b/fs/ext3/hash.c
@@ -4,7 +4,7 @@
* Copyright (C) 2002 by Theodore Ts'o
*
* This file is released under the GPL v2.
- *
+ *
* This file may be redistributed under the terms of the GNU Public
* License.
*/
@@ -80,11 +80,11 @@
* Returns the hash of a filename. If len is 0 and name is NULL, then
* this function can be used to test whether or not a hash version is
* supported.
- *
+ *
* The seed is an 4 longword (32 bits) "secret" which can be used to
* uniquify a hash. If the seed is all zero's, then some default seed
* may be used.
- *
+ *
* A particular hash version specifies whether or not the seed is
* represented, and whether or not the returned hash is 32 bits or 64
* bits. 32 bit hashes will return 0 for the minor hash.
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 36546ed..5e28836 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -216,7 +216,7 @@
continue;
if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
continue;
- if (!best_desc ||
+ if (!best_desc ||
(le16_to_cpu(desc->bg_free_blocks_count) >
le16_to_cpu(best_desc->bg_free_blocks_count))) {
best_group = group;
@@ -226,30 +226,30 @@
return best_group;
}
-/*
- * Orlov's allocator for directories.
- *
+/*
+ * Orlov's allocator for directories.
+ *
* We always try to spread first-level directories.
*
- * If there are blockgroups with both free inodes and free blocks counts
- * not worse than average we return one with smallest directory count.
- * Otherwise we simply return a random group.
- *
- * For the rest rules look so:
- *
- * It's OK to put directory into a group unless
- * it has too many directories already (max_dirs) or
- * it has too few free inodes left (min_inodes) or
- * it has too few free blocks left (min_blocks) or
- * it's already running too large debt (max_debt).
- * Parent's group is prefered, if it doesn't satisfy these
- * conditions we search cyclically through the rest. If none
- * of the groups look good we just look for a group with more
- * free inodes than average (starting at parent's group).
- *
- * Debt is incremented each time we allocate a directory and decremented
- * when we allocate an inode, within 0--255.
- */
+ * If there are blockgroups with both free inodes and free blocks counts
+ * not worse than average we return one with smallest directory count.
+ * Otherwise we simply return a random group.
+ *
+ * For the rest rules look so:
+ *
+ * It's OK to put directory into a group unless
+ * it has too many directories already (max_dirs) or
+ * it has too few free inodes left (min_inodes) or
+ * it has too few free blocks left (min_blocks) or
+ * it's already running too large debt (max_debt).
+ * Parent's group is prefered, if it doesn't satisfy these
+ * conditions we search cyclically through the rest. If none
+ * of the groups look good we just look for a group with more
+ * free inodes than average (starting at parent's group).
+ *
+ * Debt is incremented each time we allocate a directory and decremented
+ * when we allocate an inode, within 0--255.
+ */
#define INODE_COST 64
#define BLOCK_COST 256
@@ -454,7 +454,7 @@
group = find_group_dir(sb, dir);
else
group = find_group_orlov(sb, dir);
- } else
+ } else
group = find_group_other(sb, dir);
err = -ENOSPC;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 84be02e..473d206 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -55,7 +55,7 @@
/*
* The ext3 forget function must perform a revoke if we are freeing data
* which has been journaled. Metadata (eg. indirect blocks) must be
- * revoked in all cases.
+ * revoked in all cases.
*
* "bh" may be NULL: a metadata block may have been freed from memory
* but there may still be a record of it in the journal, and that record
@@ -105,7 +105,7 @@
* Work out how many blocks we need to proceed with the next chunk of a
* truncate transaction.
*/
-static unsigned long blocks_for_truncate(struct inode *inode)
+static unsigned long blocks_for_truncate(struct inode *inode)
{
unsigned long needed;
@@ -122,13 +122,13 @@
/* But we need to bound the transaction so we don't overflow the
* journal. */
- if (needed > EXT3_MAX_TRANS_DATA)
+ if (needed > EXT3_MAX_TRANS_DATA)
needed = EXT3_MAX_TRANS_DATA;
return EXT3_DATA_TRANS_BLOCKS(inode->i_sb) + needed;
}
-/*
+/*
* Truncate transactions can be complex and absolutely huge. So we need to
* be able to restart the transaction at a conventient checkpoint to make
* sure we don't overflow the journal.
@@ -136,9 +136,9 @@
* start_transaction gets us a new handle for a truncate transaction,
* and extend_transaction tries to extend the existing one a bit. If
* extend fails, we need to propagate the failure up and restart the
- * transaction in the top-level truncate loop. --sct
+ * transaction in the top-level truncate loop. --sct
*/
-static handle_t *start_transaction(struct inode *inode)
+static handle_t *start_transaction(struct inode *inode)
{
handle_t *result;
@@ -215,12 +215,12 @@
ext3_orphan_del(handle, inode);
EXT3_I(inode)->i_dtime = get_seconds();
- /*
+ /*
* One subtle ordering requirement: if anything has gone wrong
* (transaction abort, IO errors, whatever), then we can still
* do these next steps (the fs will already have been marked as
* having errors), but we can't free the inode if the mark_dirty
- * fails.
+ * fails.
*/
if (ext3_mark_inode_dirty(handle, inode))
/* If that failed, just do the required in-core inode clear. */
@@ -398,7 +398,7 @@
* + if there is a block to the left of our position - allocate near it.
* + if pointer will live in indirect block - allocate near that block.
* + if pointer will live in inode - allocate in the same
- * cylinder group.
+ * cylinder group.
*
* In the latter case we colour the starting block by the callers PID to
* prevent it from clashing with concurrent allocations for a different inode
@@ -744,7 +744,7 @@
jbd_debug(5, "splicing indirect only\n");
BUFFER_TRACE(where->bh, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, where->bh);
- if (err)
+ if (err)
goto err_out;
} else {
/*
@@ -1137,7 +1137,7 @@
* So what we do is to rely on the fact that journal_stop/journal_start
* will _not_ run commit under these circumstances because handle->h_ref
* is elevated. We'll still have enough credits for the tiny quotafile
- * write.
+ * write.
*/
static int do_journal_get_write_access(handle_t *handle,
struct buffer_head *bh)
@@ -1282,7 +1282,7 @@
if (inode->i_size > EXT3_I(inode)->i_disksize) {
EXT3_I(inode)->i_disksize = inode->i_size;
ret2 = ext3_mark_inode_dirty(handle, inode);
- if (!ret)
+ if (!ret)
ret = ret2;
}
ret2 = ext3_journal_stop(handle);
@@ -1291,7 +1291,7 @@
return ret;
}
-/*
+/*
* bmap() is special. It gets used by applications such as lilo and by
* the swapper to find the on-disk block of a specific piece of data.
*
@@ -1300,10 +1300,10 @@
* filesystem and enables swap, then they may get a nasty shock when the
* data getting swapped to that swapfile suddenly gets overwritten by
* the original zero's written out previously to the journal and
- * awaiting writeback in the kernel's buffer cache.
+ * awaiting writeback in the kernel's buffer cache.
*
* So, if we see any bmap calls here on a modified, data-journaled file,
- * take extra steps to flush any blocks which might be in the cache.
+ * take extra steps to flush any blocks which might be in the cache.
*/
static sector_t ext3_bmap(struct address_space *mapping, sector_t block)
{
@@ -1312,16 +1312,16 @@
int err;
if (EXT3_I(inode)->i_state & EXT3_STATE_JDATA) {
- /*
+ /*
* This is a REALLY heavyweight approach, but the use of
* bmap on dirty files is expected to be extremely rare:
* only if we run lilo or swapon on a freshly made file
- * do we expect this to happen.
+ * do we expect this to happen.
*
* (bmap requires CAP_SYS_RAWIO so this does not
* represent an unprivileged user DOS attack --- we'd be
* in trouble if mortal users could trigger this path at
- * will.)
+ * will.)
*
* NB. EXT3_STATE_JDATA is not set on files other than
* regular files. If somebody wants to bmap a directory
@@ -1457,7 +1457,7 @@
*/
/*
- * And attach them to the current transaction. But only if
+ * And attach them to the current transaction. But only if
* block_write_full_page() succeeded. Otherwise they are unmapped,
* and generally junk.
*/
@@ -1644,7 +1644,7 @@
}
}
- ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext3_get_block, NULL);
@@ -2025,7 +2025,7 @@
__le32 *first, __le32 *last)
{
ext3_fsblk_t block_to_free = 0; /* Starting block # of a run */
- unsigned long count = 0; /* Number of blocks in the run */
+ unsigned long count = 0; /* Number of blocks in the run */
__le32 *block_to_free_p = NULL; /* Pointer into inode/ind
corresponding to
block_to_free */
@@ -2054,7 +2054,7 @@
} else if (nr == block_to_free + count) {
count++;
} else {
- ext3_clear_blocks(handle, inode, this_bh,
+ ext3_clear_blocks(handle, inode, this_bh,
block_to_free,
count, block_to_free_p, p);
block_to_free = nr;
@@ -2184,7 +2184,7 @@
*p = 0;
BUFFER_TRACE(parent_bh,
"call ext3_journal_dirty_metadata");
- ext3_journal_dirty_metadata(handle,
+ ext3_journal_dirty_metadata(handle,
parent_bh);
}
}
@@ -2704,7 +2704,7 @@
if (raw_inode->i_block[0])
init_special_inode(inode, inode->i_mode,
old_decode_dev(le32_to_cpu(raw_inode->i_block[0])));
- else
+ else
init_special_inode(inode, inode->i_mode,
new_decode_dev(le32_to_cpu(raw_inode->i_block[1])));
}
@@ -2724,8 +2724,8 @@
*
* The caller must have write access to iloc->bh.
*/
-static int ext3_do_update_inode(handle_t *handle,
- struct inode *inode,
+static int ext3_do_update_inode(handle_t *handle,
+ struct inode *inode,
struct ext3_iloc *iloc)
{
struct ext3_inode *raw_inode = ext3_raw_inode(iloc);
@@ -2900,7 +2900,7 @@
* commit will leave the blocks being flushed in an unused state on
* disk. (On recovery, the inode will get truncated and the blocks will
* be freed, so we have a strong guarantee that no future commit will
- * leave these blocks visible to the user.)
+ * leave these blocks visible to the user.)
*
* Called with inode->sem down.
*/
@@ -3043,13 +3043,13 @@
return err;
}
-/*
+/*
* On success, We end up with an outstanding reference count against
- * iloc->bh. This _must_ be cleaned up later.
+ * iloc->bh. This _must_ be cleaned up later.
*/
int
-ext3_reserve_inode_write(handle_t *handle, struct inode *inode,
+ext3_reserve_inode_write(handle_t *handle, struct inode *inode,
struct ext3_iloc *iloc)
{
int err = 0;
@@ -3139,7 +3139,7 @@
}
#if 0
-/*
+/*
* Bind an inode's backing buffer_head into this transaction, to prevent
* it from being flushed to disk early. Unlike
* ext3_reserve_inode_write, this leaves behind no bh reference and
@@ -3157,7 +3157,7 @@
BUFFER_TRACE(iloc.bh, "get_write_access");
err = journal_get_write_access(handle, iloc.bh);
if (!err)
- err = ext3_journal_dirty_metadata(handle,
+ err = ext3_journal_dirty_metadata(handle,
iloc.bh);
brelse(iloc.bh);
}
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 2aa7101..4123f52 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -76,7 +76,7 @@
#ifdef DX_DEBUG
#define dxtrace(command) command
#else
-#define dxtrace(command)
+#define dxtrace(command)
#endif
struct fake_dirent
@@ -169,7 +169,7 @@
static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block);
static int ext3_htree_next_block(struct inode *dir, __u32 hash,
struct dx_frame *frame,
- struct dx_frame *frames,
+ struct dx_frame *frames,
__u32 *start_hash);
static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry,
struct ext3_dir_entry_2 **res_dir, int *err);
@@ -250,7 +250,7 @@
}
struct stats
-{
+{
unsigned names;
unsigned space;
unsigned bcount;
@@ -464,7 +464,7 @@
*/
static int ext3_htree_next_block(struct inode *dir, __u32 hash,
struct dx_frame *frame,
- struct dx_frame *frames,
+ struct dx_frame *frames,
__u32 *start_hash)
{
struct dx_frame *p;
@@ -632,7 +632,7 @@
}
count += ret;
hashval = ~0;
- ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS,
+ ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS,
frame, frames, &hashval);
*next_hash = hashval;
if (ret < 0) {
@@ -649,7 +649,7 @@
break;
}
dx_release(frames);
- dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n",
+ dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n",
count, *next_hash));
return count;
errout:
@@ -1050,7 +1050,7 @@
parent = ERR_PTR(-ENOMEM);
}
return parent;
-}
+}
#define S_SHIFT 12
static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = {
@@ -1198,7 +1198,7 @@
* add_dirent_to_buf will attempt search the directory block for
* space. It will return -ENOSPC if no space is available, and -EIO
* and -EEXIST if directory entry already exists.
- *
+ *
* NOTE! bh is NOT released in the case where ENOSPC is returned. In
* all other cases bh is released.
*/
@@ -1572,7 +1572,7 @@
* ext3_delete_entry deletes a directory entry by merging it with the
* previous entry
*/
-static int ext3_delete_entry (handle_t *handle,
+static int ext3_delete_entry (handle_t *handle,
struct inode * dir,
struct ext3_dir_entry_2 * de_del,
struct buffer_head * bh)
@@ -1643,12 +1643,12 @@
* is so far negative - it has no inode.
*
* If the create succeeds, we fill in the inode information
- * with d_instantiate().
+ * with d_instantiate().
*/
static int ext3_create (struct inode * dir, struct dentry * dentry, int mode,
struct nameidata *nd)
{
- handle_t *handle;
+ handle_t *handle;
struct inode * inode;
int err, retries = 0;
@@ -1813,7 +1813,7 @@
de1 = (struct ext3_dir_entry_2 *)
((char *) de + le16_to_cpu(de->rec_len));
if (le32_to_cpu(de->inode) != inode->i_ino ||
- !le32_to_cpu(de1->inode) ||
+ !le32_to_cpu(de1->inode) ||
strcmp (".", de->name) ||
strcmp ("..", de1->name)) {
ext3_warning (inode->i_sb, "empty_dir",
@@ -1883,7 +1883,7 @@
* being truncated, or files being unlinked. */
/* @@@ FIXME: Observation from aviro:
- * I think I can trigger J_ASSERT in ext3_orphan_add(). We block
+ * I think I can trigger J_ASSERT in ext3_orphan_add(). We block
* here (on lock_super()), so race with ext3_link() which might bump
* ->i_nlink. For, say it, character device. Not a regular file,
* not a directory, not a symlink and ->i_nlink > 0.
@@ -2393,4 +2393,4 @@
.removexattr = generic_removexattr,
#endif
.permission = ext3_permission,
-};
+};
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 3559086..4b95bfe 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -62,13 +62,13 @@
static void ext3_write_super (struct super_block * sb);
static void ext3_write_super_lockfs(struct super_block *sb);
-/*
+/*
* Wrappers for journal_start/end.
*
* The only special thing we need to do here is to make sure that all
* journal_end calls result in the superblock being marked dirty, so
* that sync() will call the filesystem's write_super callback if
- * appropriate.
+ * appropriate.
*/
handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks)
{
@@ -90,11 +90,11 @@
return journal_start(journal, nblocks);
}
-/*
+/*
* The only special thing we need to do here is to make sure that all
* journal_stop calls result in the superblock being marked dirty, so
* that sync() will call the filesystem's write_super callback if
- * appropriate.
+ * appropriate.
*/
int __ext3_journal_stop(const char *where, handle_t *handle)
{
@@ -369,7 +369,7 @@
{
struct list_head *l;
- printk(KERN_ERR "sb orphan head is %d\n",
+ printk(KERN_ERR "sb orphan head is %d\n",
le32_to_cpu(sbi->s_es->s_last_orphan));
printk(KERN_ERR "sb_info orphan list:\n");
@@ -378,7 +378,7 @@
printk(KERN_ERR " "
"inode %s:%ld at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
- inode->i_mode, inode->i_nlink,
+ inode->i_mode, inode->i_nlink,
NEXT_ORPHAN(inode));
}
}
@@ -475,7 +475,7 @@
inode_init_once(&ei->vfs_inode);
}
}
-
+
static int init_inodecache(void)
{
ext3_inode_cachep = kmem_cache_create("ext3_inode_cache",
@@ -1483,7 +1483,7 @@
(EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- printk(KERN_WARNING
+ printk(KERN_WARNING
"EXT3-fs warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended\n");
/*
@@ -1509,7 +1509,7 @@
if (blocksize < EXT3_MIN_BLOCK_SIZE ||
blocksize > EXT3_MAX_BLOCK_SIZE) {
- printk(KERN_ERR
+ printk(KERN_ERR
"EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
blocksize, sb->s_id);
goto failed_mount;
@@ -1533,14 +1533,14 @@
offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
bh = sb_bread(sb, logic_sb_block);
if (!bh) {
- printk(KERN_ERR
+ printk(KERN_ERR
"EXT3-fs: Can't read superblock on 2nd try.\n");
goto failed_mount;
}
es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
- printk (KERN_ERR
+ printk (KERN_ERR
"EXT3-fs: Magic mismatch, very weird !\n");
goto failed_mount;
}
@@ -1820,7 +1820,7 @@
/*
* Setup any per-fs journal parameters now. We'll do this both on
* initial mount, once the journal has been initialised but before we've
- * done any recovery; and again on any subsequent remount.
+ * done any recovery; and again on any subsequent remount.
*/
static void ext3_init_journal_params(struct super_block *sb, journal_t *journal)
{