V4L/DVB (9149): hvr950q: led feedback based on snr
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index a52abce..f0fcdb4 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -36,11 +36,39 @@
#define _AU0828_BULKPIPE 0x83
#define _BULKPIPESIZE 0xe522
+static u8 hauppauge_hvr950q_led_states[] = {
+ 0x00, /* off */
+ 0x02, /* yellow */
+ 0x04, /* green */
+};
+
+static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
+ .gpio_output = 0x00e0,
+ .gpio_output_enable = 0x6006,
+ .gpio_output_disable = 0x0660,
+
+ .gpio_leds = 0x00e2,
+ .led_states = hauppauge_hvr950q_led_states,
+ .num_led_states = sizeof(hauppauge_hvr950q_led_states),
+
+ .vsb8_strong = 20 /* dB */ * 10,
+ .qam64_strong = 25 /* dB */ * 10,
+ .qam256_strong = 32 /* dB */ * 10,
+};
+
static struct au8522_config hauppauge_hvr950q_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
.qam_if = AU8522_IF_6MHZ,
.vsb_if = AU8522_IF_6MHZ,
+ .led_cfg = &hauppauge_hvr950q_led_cfg,
+};
+
+static struct au8522_config fusionhdtv7usb_config = {
+ .demod_address = 0x8e >> 1,
+ .status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_6MHZ,
+ .vsb_if = AU8522_IF_6MHZ,
};
static struct au8522_config hauppauge_woodbury_config = {
@@ -352,7 +380,6 @@
switch (dev->board) {
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
- case AU0828_BOARD_DVICO_FUSIONHDTV7:
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_hvr950q_config,
&dev->i2c_adap);
@@ -378,6 +405,16 @@
0x60, &dev->i2c_adap,
&hauppauge_woodbury_tunerconfig);
break;
+ case AU0828_BOARD_DVICO_FUSIONHDTV7:
+ dvb->frontend = dvb_attach(au8522_attach,
+ &fusionhdtv7usb_config,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL) {
+ dvb_attach(xc5000_attach, dvb->frontend,
+ &dev->i2c_adap,
+ &hauppauge_hvr950q_tunerconfig);
+ }
+ break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");