Merge branch 'linux-2.6'
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index dafd001..4f82c85 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -930,6 +930,8 @@
l2cr= [PPC]
+ l3cr= [PPC]
+
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 7b4e8a7..1df9d4c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1269,10 +1269,6 @@
Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
@@ -1667,10 +1663,6 @@
- phy-handle : The phandle for the PHY connected to this controller.
Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
@@ -1995,7 +1987,6 @@
interrupts = <20 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
- linux,network-index = <0>;
fsl,cpm-command = <12000300>;
};
@@ -2217,12 +2208,6 @@
EMAC, that is the content of the current (bogus) "phy-port"
property.
- Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
-
Optional properties:
- phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
a search is performed.
@@ -2246,7 +2231,6 @@
Example:
EMAC0: ethernet@40000800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/Documentation/powerpc/phyp-assisted-dump.txt b/Documentation/powerpc/phyp-assisted-dump.txt
new file mode 100644
index 0000000..c4682b9
--- /dev/null
+++ b/Documentation/powerpc/phyp-assisted-dump.txt
@@ -0,0 +1,127 @@
+
+ Hypervisor-Assisted Dump
+ ------------------------
+ November 2007
+
+The goal of hypervisor-assisted dump is to enable the dump of
+a crashed system, and to do so from a fully-reset system, and
+to minimize the total elapsed time until the system is back
+in production use.
+
+As compared to kdump or other strategies, hypervisor-assisted
+dump offers several strong, practical advantages:
+
+-- Unlike kdump, the system has been reset, and loaded
+ with a fresh copy of the kernel. In particular,
+ PCI and I/O devices have been reinitialized and are
+ in a clean, consistent state.
+-- As the dump is performed, the dumped memory becomes
+ immediately available to the system for normal use.
+-- After the dump is completed, no further reboots are
+ required; the system will be fully usable, and running
+ in it's normal, production mode on it normal kernel.
+
+The above can only be accomplished by coordination with,
+and assistance from the hypervisor. The procedure is
+as follows:
+
+-- When a system crashes, the hypervisor will save
+ the low 256MB of RAM to a previously registered
+ save region. It will also save system state, system
+ registers, and hardware PTE's.
+
+-- After the low 256MB area has been saved, the
+ hypervisor will reset PCI and other hardware state.
+ It will *not* clear RAM. It will then launch the
+ bootloader, as normal.
+
+-- The freshly booted kernel will notice that there
+ is a new node (ibm,dump-kernel) in the device tree,
+ indicating that there is crash data available from
+ a previous boot. It will boot into only 256MB of RAM,
+ reserving the rest of system memory.
+
+-- Userspace tools will parse /sys/kernel/release_region
+ and read /proc/vmcore to obtain the contents of memory,
+ which holds the previous crashed kernel. The userspace
+ tools may copy this info to disk, or network, nas, san,
+ iscsi, etc. as desired.
+
+ For Example: the values in /sys/kernel/release-region
+ would look something like this (address-range pairs).
+ CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
+ DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
+
+-- As the userspace tools complete saving a portion of
+ dump, they echo an offset and size to
+ /sys/kernel/release_region to release the reserved
+ memory back to general use.
+
+ An example of this is:
+ "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ which will release 256MB at the 1GB boundary.
+
+Please note that the hypervisor-assisted dump feature
+is only available on Power6-based systems with recent
+firmware versions.
+
+Implementation details:
+----------------------
+
+During boot, a check is made to see if firmware supports
+this feature on this particular machine. If it does, then
+we check to see if a active dump is waiting for us. If yes
+then everything but 256 MB of RAM is reserved during early
+boot. This area is released once we collect a dump from user
+land scripts that are run. If there is dump data, then
+the /sys/kernel/release_region file is created, and
+the reserved memory is held.
+
+If there is no waiting dump data, then only the highest
+256MB of the ram is reserved as a scratch area. This area
+is *not* released: this region will be kept permanently
+reserved, so that it can act as a receptacle for a copy
+of the low 256MB in the case a crash does occur. See,
+however, "open issues" below, as to whether
+such a reserved region is really needed.
+
+Currently the dump will be copied from /proc/vmcore to a
+a new file upon user intervention. The starting address
+to be read and the range for each data point in provided
+in /sys/kernel/release_region.
+
+The tools to examine the dump will be same as the ones
+used for kdump.
+
+General notes:
+--------------
+Security: please note that there are potential security issues
+with any sort of dump mechanism. In particular, plaintext
+(unencrypted) data, and possibly passwords, may be present in
+the dump data. Userspace tools must take adequate precautions to
+preserve security.
+
+Open issues/ToDo:
+------------
+ o The various code paths that tell the hypervisor that a crash
+ occurred, vs. it simply being a normal reboot, should be
+ reviewed, and possibly clarified/fixed.
+
+ o Instead of using /sys/kernel, should there be a /sys/dump
+ instead? There is a dump_subsys being created by the s390 code,
+ perhaps the pseries code should use a similar layout as well.
+
+ o Is reserving a 256MB region really required? The goal of
+ reserving a 256MB scratch area is to make sure that no
+ important crash data is clobbered when the hypervisor
+ save low mem to the scratch area. But, if one could assure
+ that nothing important is located in some 256MB area, then
+ it would not need to be reserved. Something that can be
+ improved in subsequent versions.
+
+ o Still working the kdump team to integrate this with kdump,
+ some work remains but this would not affect the current
+ patches.
+
+ o Still need to write a shell script, to copy the dump away.
+ Currently I am parsing it manually.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 1189d8d..625342e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -91,6 +91,7 @@
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_LMB
config EARLY_PRINTK
bool
@@ -210,14 +211,25 @@
source kernel/Kconfig.preempt
source "fs/Kconfig.binfmt"
-# We optimistically allocate largepages from the VM, so make the limit
-# large enough (16MB). This badly named config option is actually
-# max order + 1
config FORCE_MAX_ZONEORDER
- int
- depends on PPC64
+ int "Maximum zone order"
default "9" if PPC_64K_PAGES
- default "13"
+ default "13" if PPC64
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. For example, on 64-bit
+ systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
+ this in mind when choosing a value for this option.
config HUGETLB_PAGE_SIZE_VARIABLE
bool
@@ -307,6 +319,16 @@
Don't change this unless you know what you are doing.
+config PHYP_DUMP
+ bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+ depends on PPC_PSERIES && EXPERIMENTAL
+ help
+ Hypervisor-assisted dump is meant to be a kdump replacement
+ offering robustness and speed not possible without system
+ hypervisor assistence.
+
+ If unsure, say "N"
+
config PPCBUG_NVRAM
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
default y if PPC_PREP
@@ -490,6 +512,9 @@
bool
select PPC_INDIRECT_PCI
+config 4xx_SOC
+ bool
+
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index ab5cfe8..dd80825 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -164,7 +164,7 @@
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-bootwrapper_install:
+bootwrapper_install %.dtb:
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
define archhelp
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 1aded8f..7dcd9e9 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,6 +40,7 @@
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
zlib := inffast.c inflate.c inftrees.c
@@ -64,7 +65,8 @@
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
fixed-head.S ep88xc.c ep405.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- cuboot-warp.c cuboot-85xx-cpm2.c
+ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+ virtex405-head.S
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -216,6 +218,7 @@
image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
+image-$(CONFIG_YOSEMITE) += cuImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
@@ -255,6 +258,7 @@
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_SBC8560) += cuImage.sbc8560
+image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
@@ -285,11 +289,11 @@
$(call if_changed,wrap,$*)
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
- $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+ $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
- $(call if_changed,wrap,$*,$(dtstree)/$*.dts)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+ $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
# prefix
@@ -302,14 +306,24 @@
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
-$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
+$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
-$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
+ $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
@@ -326,7 +340,7 @@
# anything not in $(targets)
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
- otheros.bld
+ otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c
index 54b33f1..b82cacb 100644
--- a/arch/powerpc/boot/bamboo.c
+++ b/arch/powerpc/boot/bamboo.c
@@ -33,7 +33,8 @@
ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
- dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
+ dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
+ dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
}
void bamboo_init(void *mac0, void *mac1)
diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c
index cf452b6..0a3fdde 100644
--- a/arch/powerpc/boot/cuboot-rainier.c
+++ b/arch/powerpc/boot/cuboot-rainier.c
@@ -42,7 +42,8 @@
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
- dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c
index f555575..caf8f2e 100644
--- a/arch/powerpc/boot/cuboot-sequoia.c
+++ b/arch/powerpc/boot/cuboot-sequoia.c
@@ -42,7 +42,8 @@
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
- dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c
index b55b804..9bc906a 100644
--- a/arch/powerpc/boot/cuboot-taishan.c
+++ b/arch/powerpc/boot/cuboot-taishan.c
@@ -40,7 +40,8 @@
ibm4xx_sdram_fixup_memsize();
- dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
}
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index 3db93e8..eb108a8 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -24,7 +24,7 @@
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
- dt_fixup_mac_addresses(&bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
}
diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c
new file mode 100644
index 0000000..cc6e338
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-yosemite.c
@@ -0,0 +1,44 @@
+/*
+ * Old U-boot compatibility for Yosemite
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void yosemite_fixups(void)
+{
+ unsigned long sysclk = 66666666;
+
+ ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ ibm4xx_sdram_fixup_memsize();
+ ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = yosemite_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index 7dc37c9..ba2521b 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -204,7 +204,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
@@ -225,7 +224,6 @@
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
new file mode 100644
index 0000000..6f3d38a
--- /dev/null
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -0,0 +1,402 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,canyonlands";
+ compatible = "amcc,canyonlands";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460EX";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460ex";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460ex";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460ex", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <2>;
+ num-rx-chans = <10>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 6 4
+ /*RXEOB*/ 7 4
+ /*SERR*/ 3 4
+ /*TXDE*/ 4 4
+ /*RXDE*/ 5 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <b0000000 4 b0000000 50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460ex", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ interrupts = <6 4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1d 4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460ex", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+ reg = <ef601500 8>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <ef601350 30>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <ef601450 30>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 10 4
+ /*Wake*/ 1 &UIC2 14 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 11 4
+ /*Wake*/ 1 &UIC2 15 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0 3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0000 0 0 0>;
+ interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 08010000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 08011000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <80 bf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 0b000cb..5079dc8 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -241,7 +241,6 @@
};
EMAC0: ethernet@40000800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
@@ -261,7 +260,6 @@
zmii-channel = <0>;
};
EMAC1: ethernet@40000900 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
new file mode 100644
index 0000000..958a5ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -0,0 +1,467 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,glacier";
+ compatible = "amcc,glacier", "amcc,canyonlands";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <20>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 6 4
+ /*RXEOB*/ 7 4
+ /*SERR*/ 3 4
+ /*TXDE*/ 4 4
+ /*RXDE*/ 5 4>;
+ desc-base-addr-high = <8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <b0000000 4 b0000000 50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ interrupts = <6 4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1d 4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460gt", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <ef601500 8>;
+ has-mdio;
+ };
+
+ RGMII1: emac-rgmii@ef601600 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <ef601600 8>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <ef601350 30>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <ef601450 30>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 10 4
+ /*Wake*/ 1 &UIC2 14 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 11 4
+ /*Wake*/ 1 &UIC2 15 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 12 4
+ /*Wake*/ 1 &UIC2 16 4>;
+ reg = <ef601100 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <10>;
+ cell-index = <2>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC3: ethernet@ef601200 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC3>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 13 4
+ /*Wake*/ 1 &UIC2 17 4>;
+ reg = <ef601200 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <18>;
+ cell-index = <3>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0 3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0000 0 0 0>;
+ interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 08010000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 08011000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <80 bf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index ae68fef..b5d95ac 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -12,7 +12,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,haleakala";
- compatible = "amcc,kilauea";
+ compatible = "amcc,haleakala", "amcc,kilauea";
dcr-parent = <&/cpus/cpu@0>;
aliases {
@@ -218,7 +218,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index fc86e5a..cc2873a 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -212,7 +212,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "gmii";
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 8baef61..48c9a6e 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -219,7 +219,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -247,7 +247,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
new file mode 100644
index 0000000..f869ce3c
--- /dev/null
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -0,0 +1,267 @@
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ model = "KSI8560";
+ compatible = "emerson,KSI8560";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8560@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x8000>; /* L1, 32K */
+ i-cache-size = <0x8000>; /* L1, 32K */
+ timebase-frequency = <0>; /* From U-boot */
+ bus-frequency = <0>; /* From U-boot */
+ clock-frequency = <0>; /* From U-boot */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */
+ };
+
+ soc@fdf00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x00000000 0xfdf00000 0x00100000>;
+ bus-frequency = <0>; /* Fixed by bootwrapper */
+
+ memory-controller@2000 {
+ compatible = "fsl,8540-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x12 0x2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8540-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <0x20>; /* 32 bytes */
+ cache-size = <0x40000>; /* L2, 256K */
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x10 0x2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&MPIC>;
+ dfsrr;
+ };
+
+ mdio@24520 { /* For TSECs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY2: ethernet-phy@2 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: ethernet@24000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY1>;
+ };
+
+ enet1: ethernet@25000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY2>;
+ };
+
+ MPIC: pic@40000 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x40000 0x40000>;
+ device_type = "open-pic";
+ };
+
+ cpm@919c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+ reg = <0x919c0 0x30>;
+ ranges;
+
+ muram@80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x0 0x4000 0x9000 0x2000>;
+ };
+ };
+
+ brg@919f0 {
+ compatible = "fsl,mpc8560-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <0x919f0 0x10 0x915f0 0x10>;
+ clock-frequency = <165000000>; /* 166MHz */
+ };
+
+ CPMPIC: pic@90c00 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0x2e 0x2>;
+ interrupt-parent = <&MPIC>;
+ reg = <0x90c00 0x80>;
+ compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+ };
+
+ serial@91a00 {
+ device_type = "serial";
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a00 0x20 0x88000 0x100>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0x800000>;
+ current-speed = <0x1c200>;
+ interrupts = <0x28 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ };
+
+ serial@91a20 {
+ device_type = "serial";
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a20 0x20 0x88100 0x100>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <0x4a00000>;
+ current-speed = <0x1c200>;
+ interrupts = <0x29 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ };
+
+ mdio@90d00 { /* For FCCs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,cpm2-mdio-bitbang";
+ reg = <0x90d00 0x14>;
+ fsl,mdio-pin = <24>;
+ fsl,mdc-pin = <25>;
+
+ PHY0: ethernet-phy@0 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet2: ethernet@91300 {
+ device_type = "network";
+ compatible = "fsl,mpc8560-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ fsl,cpm-command = <0x12000300>;
+ interrupts = <0x20 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ phy-handle = <&PHY0>;
+ };
+ };
+ };
+
+ localbus@fdf05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-localbus";
+ reg = <0xfdf05000 0x68>;
+
+ ranges = <0x0 0x0 0xe0000000 0x00800000
+ 0x4 0x0 0xe8080000 0x00080000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <0x2>;
+
+ partition@0 {
+ label = "Primary Kernel";
+ reg = <0x0 0x180000>;
+ };
+ partition@180000 {
+ label = "Primary Filesystem";
+ reg = <0x180000 0x580000>;
+ };
+ partition@700000 {
+ label = "Monitor";
+ reg = <0x300000 0x100000>;
+ read-only;
+ };
+ };
+
+ cpld@4,0 {
+ compatible = "emerson,KSI8560-cpld";
+ reg = <0x4 0x0 0x80000>;
+ };
+ };
+
+
+ chosen {
+ linux,stdout-path = "/soc/cpm/serial@91a00";
+ };
+};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 710c011..84cc5e7 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -219,7 +219,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -247,7 +247,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index f947c75..6a8fa70 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -254,7 +254,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
@@ -270,7 +269,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -284,7 +283,6 @@
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
@@ -300,7 +298,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 8db9515..a1ae4d6 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -269,7 +269,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
@@ -285,7 +284,7 @@
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -299,7 +298,6 @@
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
@@ -315,7 +313,7 @@
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index 8278068..e808e1c 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -104,6 +104,16 @@
// FIXME: anything else?
};
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+ dcr-reg = <20 8 /* Internal SRAM DCR's */
+ 30 8>; /* L2 cache DCR's */
+ cache-line-size = <20>; /* 32 bytes */
+ cache-size = <40000>; /* L2, 256K */
+ interrupt-parent = <&UIC2>;
+ interrupts = <17 1>;
+ };
+
plb {
compatible = "ibm,plb-440gx", "ibm,plb4";
#address-cells = <2>;
@@ -232,10 +242,18 @@
reg = <40000790 8>;
};
+ TAH0: emac-tah@40000b50 {
+ compatible = "ibm,tah-440gx", "ibm,tah";
+ reg = <40000b50 30>;
+ };
+
+ TAH1: emac-tah@40000d50 {
+ compatible = "ibm,tah-440gx", "ibm,tah";
+ reg = <40000d50 30>;
+ };
EMAC0: ethernet@40000800 {
unused = <1>;
- linux,network-index = <2>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
@@ -256,7 +274,6 @@
};
EMAC1: ethernet@40000900 {
unused = <1>;
- linux,network-index = <3>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
@@ -277,7 +294,6 @@
};
EMAC2: ethernet@40000c00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
@@ -288,7 +304,7 @@
mal-tx-channel = <2>;
mal-rx-channel = <2>;
cell-index = <2>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -297,10 +313,11 @@
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
zmii-channel = <2>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
};
EMAC3: ethernet@40000e00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
@@ -311,7 +328,7 @@
mal-tx-channel = <3>;
mal-rx-channel = <3>;
cell-index = <3>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
@@ -320,6 +337,8 @@
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
zmii-channel = <3>;
+ tah-device = <&TAH1>;
+ tah-channel = <0>;
};
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index dcc21b0..a328607 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -125,7 +125,6 @@
};
EMAC: ethernet@ef600800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index dc1499d..b04a52e 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -204,7 +204,6 @@
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
new file mode 100644
index 0000000..0d6d332
--- /dev/null
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -0,0 +1,304 @@
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,yosemite";
+ compatible = "amcc,yosemite","amcc,bamboo";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ serial2 = &UART2;
+ serial3 = &UART3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440EP";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440ep";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440ep";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ DMA0: dma {
+ compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+ dcr-reg = <100 027>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+ /*RXEOB*/ 1 &UIC0 b 4
+ /*SERR*/ 2 &UIC1 0 4
+ /*TXDE*/ 3 &UIC1 1 4
+ /*RXDE*/ 4 &UIC1 2 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Bamboo is oddball in the 44x world and doesn't use the ERPN
+ * bits.
+ */
+ ranges = <00000000 0 00000000 80000000
+ 80000000 0 80000000 80000000>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <7 4>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ status = "disabled";
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <4 4>;
+ status = "disabled";
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <7 4>;
+ };
+
+ spi@ef600900 {
+ compatible = "amcc,spi-440ep";
+ reg = <ef600900 6>;
+ interrupts = <8 4>;
+ interrupt-parent = <&UIC0>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4 1f 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2 3>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <1>;
+ };
+
+ usb@ef601000 {
+ compatible = "ohci-be";
+ reg = <ef601000 80>;
+ interrupts = <8 4 9 4>;
+ interrupt-parent = < &UIC1 >;
+ };
+ };
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0 eec00000 8 /* Config space access */
+ 0 eed00000 4 /* IACK */
+ 0 eed00000 4 /* Special cycle */
+ 0 ef400000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+ 01000000 0 00000000 0 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Bamboo has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1b 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1a 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 19 8
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c
index f61364c..5532ab3 100644
--- a/arch/powerpc/boot/ebony.c
+++ b/arch/powerpc/boot/ebony.c
@@ -75,7 +75,8 @@
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
ibm4xx_sdram_fixup_memsize();
- dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+ dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
+ dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ebony_flashsel_fixup();
}
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index 59016be..c541fd8 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -35,7 +35,7 @@
#define check_err(err) \
({ \
if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
- printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \
+ printf("%s():%d %s\n\r", __func__, __LINE__, \
fdt_strerror(err)); \
if (BAD_ERROR(err)) \
exit(); \
diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S
index a55c273..b6fcbaf 100644
--- a/arch/powerpc/boot/ps3-head.S
+++ b/arch/powerpc/boot/ps3-head.S
@@ -27,8 +27,9 @@
/*
* __system_reset_overlay - The PS3 first stage entry.
*
- * The bootwraper build script copies the 0x100 bytes at symbol
- * __system_reset_overlay to offset 0x100 of the rom image.
+ * The bootwraper build script copies the 512 bytes at symbol
+ * __system_reset_overlay to offset 0x100 of the rom image. This symbol
+ * must occupy 512 or less bytes.
*
* The PS3 has a single processor with two threads.
*/
@@ -47,8 +48,6 @@
mfspr r3, 0x88
cntlzw. r3, r3
- li r4, 0
- li r5, 0
beq 1f
/* Secondary goes to __secondary_hold in kernel. */
@@ -57,8 +56,14 @@
mtctr r4
bctr
- /* Primary delays then goes to _zimage_start in wrapper. */
1:
+ /* Save the value at addr zero for a null pointer write check later. */
+
+ li r4, 0
+ lwz r3, 0(r4)
+
+ /* Primary delays then goes to _zimage_start in wrapper. */
+
or 31, 31, 31 /* db16cyc */
or 31, 31, 31 /* db16cyc */
@@ -67,16 +72,18 @@
mtctr r4
bctr
+ . = __system_reset_overlay + 512
+
/*
* __system_reset_kernel - Place holder for the kernel reset vector.
*
- * The bootwrapper build script copies 0x100 bytes from offset 0x100
+ * The bootwrapper build script copies 512 bytes from offset 0x100
* of the rom image to the symbol __system_reset_kernel. At runtime
- * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel
- * to ram address 0x100. This symbol must occupy 0x100 bytes.
+ * the bootwrapper program copies the 512 bytes at __system_reset_kernel
+ * to ram address 0x100. This symbol must occupy 512 bytes.
*/
.globl __system_reset_kernel
__system_reset_kernel:
- . = __system_reset_kernel + 0x100
+ . = __system_reset_kernel + 512
diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c
index 3b0ac4d..9954d98 100644
--- a/arch/powerpc/boot/ps3.c
+++ b/arch/powerpc/boot/ps3.c
@@ -27,10 +27,10 @@
#include "page.h"
#include "ops.h"
-extern s64 lv1_panic(u64 in_1);
-extern s64 lv1_get_logical_partition_id(u64 *out_1);
-extern s64 lv1_get_logical_ppe_id(u64 *out_1);
-extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
+extern int lv1_panic(u64 in_1);
+extern int lv1_get_logical_partition_id(u64 *out_1);
+extern int lv1_get_logical_ppe_id(u64 *out_1);
+extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
u64 in_4, u64 in_5, u64 *out_1, u64 *out_2);
#ifdef DEBUG
@@ -46,6 +46,7 @@
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
*/
+
static char cmdline[COMMAND_LINE_SIZE]
__attribute__((__section__("__builtin_cmdline")));
@@ -75,7 +76,7 @@
static int ps3_repository_read_rm_size(u64 *rm_size)
{
- s64 result;
+ int result;
u64 lpar_id;
u64 ppe_id;
u64 v2;
@@ -114,16 +115,17 @@
{
extern char __system_reset_kernel[];
- memcpy((void *)0x100, __system_reset_kernel, 0x100);
- flush_cache((void *)0x100, 0x100);
+ memcpy((void *)0x100, __system_reset_kernel, 512);
+ flush_cache((void *)0x100, 512);
}
-void platform_init(void)
+void platform_init(unsigned long null_check)
{
const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
void *chosen;
unsigned long ft_addr;
u64 rm_size;
+ unsigned long val;
console_ops.write = ps3_console_write;
platform_ops.exit = ps3_exit;
@@ -151,6 +153,11 @@
printf(" flat tree at 0x%lx\n\r", ft_addr);
+ val = *(unsigned long *)0;
+
+ if (val != null_check)
+ printf("null check failed: %lx != %lx\n\r", val, null_check);
+
((kernel_entry_t)0)(ft_addr, 0, NULL);
ps3_exit();
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
new file mode 100644
index 0000000..86cd285
--- /dev/null
+++ b/arch/powerpc/boot/simpleboot.c
@@ -0,0 +1,84 @@
+/*
+ * The simple platform -- for booting when firmware doesn't supply a device
+ * tree or any platform configuration information.
+ * All data is extracted from an embedded device tree
+ * blob.
+ *
+ * Authors: Scott Wood <scottwood@freescale.com>
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "io.h"
+#include "stdio.h"
+#include "libfdt/libfdt.h"
+
+BSS_STACK(4*1024);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ const u32 *na, *ns, *reg, *timebase;
+ u64 memsize64;
+ int node, size, i;
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ /* Find the #address-cells and #size-cells properties */
+ node = fdt_path_offset(_dtb_start, "/");
+ if (node < 0)
+ fatal("Cannot find root node\n");
+ na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
+ if (!na || (size != 4))
+ fatal("Cannot find #address-cells property");
+ ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
+ if (!ns || (size != 4))
+ fatal("Cannot find #size-cells property");
+
+ /* Find the memory range */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "memory", sizeof("memory"));
+ if (node < 0)
+ fatal("Cannot find memory node\n");
+ reg = fdt_getprop(_dtb_start, node, "reg", &size);
+ if (size < (*na+*ns) * sizeof(u32))
+ fatal("cannot get memory range\n");
+
+ /* Only interested in memory based at 0 */
+ for (i = 0; i < *na; i++)
+ if (*reg++ != 0)
+ fatal("Memory range is not based at address 0\n");
+
+ /* get the memsize and trucate it to under 4G on 32 bit machines */
+ memsize64 = 0;
+ for (i = 0; i < *ns; i++)
+ memsize64 = (memsize64 << 32) | *reg++;
+ if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
+ memsize64 = 0xffffffff;
+
+ /* finally, setup the timebase */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ /* Now we have the memory size; initialize the heap */
+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
+
+ /* prepare the device tree and find the console */
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c
index 472e366..097974e 100644
--- a/arch/powerpc/boot/treeboot-walnut.c
+++ b/arch/powerpc/boot/treeboot-walnut.c
@@ -68,7 +68,7 @@
ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
ibm4xx_fixup_ebc_ranges("/plb/ebc");
walnut_flashsel_fixup();
- dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF);
+ dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
}
void platform_init(void)
diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S
new file mode 100644
index 0000000..3edb13f
--- /dev/null
+++ b/arch/powerpc/boot/virtex405-head.S
@@ -0,0 +1,30 @@
+#include "ppc_asm.h"
+
+ .text
+ .global _zimage_start
+_zimage_start:
+
+ /* PPC errata 213: needed by Virtex-4 FX */
+ mfccr0 0
+ oris 0,0,0x50000000@h
+ mtccr0 0
+
+ /*
+ * Invalidate the data cache if the data cache is turned off.
+ * - The 405 core does not invalidate the data cache on power-up
+ * or reset but does turn off the data cache. We cannot assume
+ * that the cache contents are valid.
+ * - If the data cache is turned on this must have been done by
+ * a bootloader and we assume that the cache contents are
+ * valid.
+ */
+ mfdccr r9
+ cmplwi r9,0
+ bne 2f
+ lis r9,0
+ li r8,256
+ mtctr r8
+1: dccci r0,r9
+ addi r9,r9,0x20
+ bdnz 1b
+2: b _zimage_start_lib
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 8f8b849..14a0182 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,7 +174,7 @@
*-mpc83*)
platformo=$object/cuboot-83xx.o
;;
- *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
+ *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
platformo=$object/cuboot-85xx-cpm2.o
;;
*-mpc85*|*-tqm8540|*-sbc85*)
@@ -199,6 +199,10 @@
platformo="$object/fixed-head.o $object/redboot-8xx.o"
binary=y
;;
+simpleboot-virtex405-*)
+ platformo="$object/virtex405-head.o $object/simpleboot.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -298,15 +302,16 @@
exit 0
;;
ps3)
- # The ps3's loader supports loading gzipped binary images from flash
- # rom to addr zero. The loader enters the image at addr 0x100. A
- # bootwrapper overlay is use to arrange for the kernel to be loaded
- # to addr zero and to have a suitable bootwrapper entry at 0x100.
- # To construct the rom image, 0x100 bytes from offset 0x100 in the
- # kernel is copied to the bootwrapper symbol __system_reset_kernel.
- # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
- # then copied to offset 0x100. At runtime the bootwrapper program
- # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
+ # The ps3's loader supports loading a gzipped binary image from flash
+ # rom to ram addr zero. The loader then enters the system reset
+ # vector at addr 0x100. A bootwrapper overlay is used to arrange for
+ # a binary image of the kernel to be at addr zero, and yet have a
+ # suitable bootwrapper entry at 0x100. To construct the final rom
+ # image 512 bytes from offset 0x100 is copied to the bootwrapper
+ # place holder at symbol __system_reset_kernel. The 512 bytes of the
+ # bootwrapper entry code at symbol __system_reset_overlay is then
+ # copied to offset 0x100. At runtime the bootwrapper program copies
+ # the data at __system_reset_kernel back to addr 0x100.
system_reset_overlay=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_overlay$' \
@@ -317,7 +322,7 @@
| cut -d' ' -f1`
system_reset_kernel=`printf "%d" $system_reset_kernel`
overlay_dest="256"
- overlay_size="256"
+ overlay_size="512"
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
diff --git a/arch/powerpc/configs/canyonlands_defconfig b/arch/powerpc/configs/canyonlands_defconfig
new file mode 100644
index 0000000..a3b763c
--- /dev/null
+++ b/arch/powerpc/configs/canyonlands_defconfig
@@ -0,0 +1,721 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Thu Feb 21 14:29:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_CANYONLANDS=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 38b85b2..d7fd298 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:33:36 2008
+# Thu Mar 27 13:55:37 2008
#
# CONFIG_PPC64 is not set
@@ -74,8 +74,6 @@
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -243,7 +241,7 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -1328,6 +1326,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0f82f66..a20501f 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:36:41 2008
+# Thu Mar 27 13:55:43 2008
#
CONFIG_PPC64=y
@@ -77,8 +77,6 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -276,7 +274,7 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -1596,6 +1594,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 8d9a84f..b3128fb 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:43:46 2008
+# Thu Mar 27 13:55:45 2008
#
CONFIG_PPC64=y
@@ -77,8 +77,6 @@
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -261,7 +259,7 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -1065,6 +1063,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/ksi8560_defconfig b/arch/powerpc/configs/ksi8560_defconfig
new file mode 100644
index 0000000..2d0debc
--- /dev/null
+++ b/arch/powerpc/configs/ksi8560_defconfig
@@ -0,0 +1,899 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Mon Feb 11 16:25:19 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_KSI8560=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b810d0..7a166a3 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -333,7 +333,7 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -374,6 +374,7 @@
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
@@ -427,10 +428,129 @@
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -536,6 +656,7 @@
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
@@ -783,12 +904,14 @@
#
# may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 558b0d3..fca1142 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:05:14 2008
+# Thu Mar 27 13:56:21 2008
#
# CONFIG_PPC64 is not set
@@ -77,8 +77,6 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -272,7 +270,7 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
@@ -1895,6 +1893,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 57bd775..12f9b5a 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:57:35 2008
+# Linux kernel version: 2.6.25-rc6
+# Sat Apr 5 09:35:48 2008
#
# CONFIG_PPC64 is not set
@@ -79,6 +79,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +114,7 @@
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -143,7 +145,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
@@ -161,12 +162,15 @@
CONFIG_KATMAI=y
CONFIG_RAINIER=y
CONFIG_WARP=y
+CONFIG_CANYONLANDS=y
+CONFIG_YOSEMITE=y
CONFIG_440EP=y
CONFIG_440EPX=y
CONFIG_440GRX=y
CONFIG_440GP=y
CONFIG_440GX=y
CONFIG_440SPe=y
+CONFIG_460EX=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -199,7 +203,6 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
@@ -232,6 +235,7 @@
#
CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -678,6 +682,7 @@
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -805,6 +810,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 880ab7ad..970282b 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:06:28 2008
+# Thu Mar 27 13:56:24 2008
#
CONFIG_PPC64=y
@@ -84,8 +84,6 @@
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
@@ -289,6 +287,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -335,7 +334,7 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
@@ -1881,6 +1880,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 755aca7..3e2593c 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:08:01 2008
+# Thu Mar 27 13:56:28 2008
#
CONFIG_PPC64=y
@@ -83,8 +83,6 @@
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
@@ -237,6 +235,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
@@ -283,7 +282,7 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
@@ -1519,6 +1518,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 4b749c4..e932b43 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -26,8 +26,6 @@
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
-#else
-#include <linux/ptrace.h>
#endif
#include <asm/io.h>
@@ -60,7 +58,6 @@
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
#else
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
- DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
#endif /* CONFIG_PPC64 */
DEFINE(KSP, offsetof(struct thread_struct, ksp));
@@ -80,7 +77,6 @@
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
- DEFINE(PT_PTRACED, PT_PTRACED);
#endif
#ifdef CONFIG_SPE
DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 80e2eef..9f93777 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,6 +7,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/lmb.h>
#include <asm/sections.h>
#include <asm/prom.h>
@@ -15,7 +16,7 @@
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 6250443..5465e8d 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -3,7 +3,7 @@
* Valentine Barshak <vbarshak@ru.mvista.com>
* MontaVista Software, Inc (c) 2007
*
- * Based on cpu_setup_6xx code by
+ * Based on cpu_setup_6xx code by
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or
@@ -32,6 +32,9 @@
bl __fixup_440A_mcheck
mtlr r4
blr
+_GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
+ b __init_fpu_44x
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a8f5cc..26ffb44 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -36,6 +36,8 @@
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -1397,6 +1399,30 @@
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460EX */
+ .pvr_mask = 0xffff0002,
+ .pvr_value = 0x13020002,
+ .cpu_name = "460EX",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460ex,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
+ { /* 460GT */
+ .pvr_mask = 0xffff0002,
+ .pvr_value = 0x13020000,
+ .cpu_name = "460GT",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460gt,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
#endif /* CONFIG_44x */
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_E200
@@ -1512,7 +1538,7 @@
*t = *s;
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
#if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
- /* ppc64 and booke expect identify_cpu to also call
+ /* ppc64 and booke expect identify_cpu to also call
* setup_cpu for that processor. I will consolidate
* that at a later time, for now, just use #ifdef.
* we also don't need to PTRRELOC the function pointer
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 571132e..eae401d 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,12 +24,13 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/kexec.h>
#include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/smp.h>
#include <asm/system.h>
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 29ff77c..9ee3c52 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,8 +13,9 @@
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/uaccess.h>
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 0f4fac5..c16d135 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -763,23 +763,6 @@
b fast_exception_return
/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
-/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
* and save the AltiVec registers in its thread_struct.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 2f50bb5..9971159 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -183,7 +183,7 @@
ret = ibmebus_create_device(child);
if (ret) {
printk(KERN_ERR "%s: failed to create device (%i)",
- __FUNCTION__, ret);
+ __func__, ret);
of_node_put(child);
break;
}
@@ -269,7 +269,7 @@
if (bus_find_device(&ibmebus_bus_type, NULL, path,
ibmebus_match_path)) {
printk(KERN_WARNING "%s: %s has already been probed\n",
- __FUNCTION__, path);
+ __func__, path);
rc = -EEXIST;
goto out;
}
@@ -279,7 +279,7 @@
of_node_put(dn);
} else {
printk(KERN_WARNING "%s: no such device node: %s\n",
- __FUNCTION__, path);
+ __func__, path);
rc = -ENODEV;
}
@@ -308,7 +308,7 @@
return count;
} else {
printk(KERN_WARNING "%s: %s not on the bus\n",
- __FUNCTION__, path);
+ __func__, path);
kfree(path);
return -ENODEV;
@@ -337,14 +337,14 @@
err = of_bus_type_init(&ibmebus_bus_type, "ibmebus");
if (err) {
printk(KERN_ERR "%s: failed to register IBM eBus.\n",
- __FUNCTION__);
+ __func__);
return err;
}
err = device_register(&ibmebus_bus_device);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
- __FUNCTION__, err);
+ __func__, err);
bus_unregister(&ibmebus_bus_type);
return err;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8f1f4e5..0c66366 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -520,7 +520,7 @@
unsigned int order;
if (!tbl || !tbl->it_map) {
- printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: expected TCE map for %s\n", __func__,
node_name);
return;
}
@@ -530,7 +530,7 @@
for (i = 0; i < (tbl->it_size/64); i++) {
if (tbl->it_map[i] != 0) {
printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
- __FUNCTION__, node_name);
+ __func__, node_name);
break;
}
}
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index ee172aa..289af34 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -80,13 +80,13 @@
* (size depending on dev->n_addr_cells)
* cell 5: the size of the range
*/
- if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) {
+ if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) {
range++;
rlen -= sizeof(struct isa_range);
if (rlen < sizeof(struct isa_range))
goto inval_range;
}
- if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO)
+ if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO)
goto inval_range;
isa_addr = range->isa_addr.a_lo;
@@ -99,7 +99,7 @@
*/
if ((pci_addr != 0) || (isa_addr != 0)) {
printk(KERN_ERR "unexpected isa to pci mapping: %s\n",
- __FUNCTION__);
+ __func__);
return;
}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index dcb89a8..1ffacc6 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -226,7 +226,7 @@
unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!local_buffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
- __FILE__, __FUNCTION__, __LINE__);
+ __FILE__, __func__, __LINE__);
return;
}
@@ -243,14 +243,14 @@
if (call_status != 0) {
printk(KERN_INFO
"%s %s Error calling get-system-parameter (0x%x)\n",
- __FILE__, __FUNCTION__, call_status);
+ __FILE__, __func__, call_status);
} else {
int splpar_strlen;
int idx, w_idx;
char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!workbuffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
- __FILE__, __FUNCTION__, __LINE__);
+ __FILE__, __func__, __LINE__);
kfree(local_buffer);
return;
}
@@ -484,10 +484,10 @@
current_weight = (resource >> 5 * 8) & 0xFF;
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
- __FUNCTION__, current_entitled, current_weight);
+ __func__, current_entitled, current_weight);
pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
- __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+ __func__, *new_entitled_ptr, *new_weight_ptr);
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
*new_weight_ptr);
@@ -502,7 +502,7 @@
retval = -EINVAL;
} else {
printk(KERN_WARNING "%s: received unknown hv return code %ld",
- __FUNCTION__, retval);
+ __func__, retval);
retval = -EIO;
}
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index c0c8e8c..2d202f2 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,8 +12,9 @@
#include <linux/kexec.h>
#include <linux/reboot.h>
#include <linux/threads.h>
+#include <linux/lmb.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
void machine_crash_shutdown(struct pt_regs *regs)
{
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 9c98424..5a4c76e 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -58,7 +58,6 @@
extern void single_step_exception(struct pt_regs *regs);
extern int sys_sigreturn(struct pt_regs *regs);
-EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
@@ -79,6 +78,7 @@
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
@@ -192,3 +192,4 @@
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
+EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4ec6055..a279102 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -868,11 +868,6 @@
flush_spe_to_thread(current);
error = do_execve(filename, (char __user * __user *) a1,
(char __user * __user *) a2, regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
out:
return error;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index eac97f4..31d5b22 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,10 +31,10 @@
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/rtas.h>
-#include <asm/lmb.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/irq.h>
@@ -51,6 +51,7 @@
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
#include <asm/kexec.h>
#ifdef DEBUG
@@ -436,7 +437,7 @@
* The device tree may be allocated beyond our memory limit, or inside the
* crash kernel region for kdump. If so, move it out of the way.
*/
-static void move_device_tree(void)
+static void __init move_device_tree(void)
{
unsigned long start, size;
void *p;
@@ -1040,6 +1041,56 @@
#endif
}
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+ unsigned long base, size;
+ if (!phyp_dump_info->phyp_dump_configured) {
+ printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+ return;
+ }
+
+ if (!phyp_dump_info->phyp_dump_at_boot) {
+ printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+ return;
+ }
+
+ if (phyp_dump_info->phyp_dump_is_active) {
+ /* Reserve *everything* above RMR.Area freed by userland tools*/
+ base = PHYP_DUMP_RMR_END;
+ size = lmb_end_of_DRAM() - base;
+
+ /* XXX crashed_ram_end is wrong, since it may be beyond
+ * the memory_limit, it will need to be adjusted. */
+ lmb_reserve(base, size);
+
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ } else {
+ size = phyp_dump_info->cpu_state_size +
+ phyp_dump_info->hpte_region_size +
+ PHYP_DUMP_RMR_END;
+ base = lmb_end_of_DRAM() - size;
+ lmb_reserve(base, size);
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ }
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
+
+
void __init early_init_devtree(void *params)
{
DBG(" -> early_init_devtree(%p)\n", params);
@@ -1052,6 +1103,11 @@
of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
#endif
+#ifdef CONFIG_PHYP_DUMP
+ /* scan tree to see if dump occured during last boot */
+ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
@@ -1072,6 +1128,7 @@
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
+ phyp_dump_reserve_mem();
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 52e95c2..eb3beea 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,6 +22,7 @@
#include <linux/smp.h>
#include <linux/completion.h>
#include <linux/cpumask.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -34,7 +35,6 @@
#include <asm/system.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include <asm/syscalls.h>
#include <asm/smp.h>
@@ -507,7 +507,7 @@
break;
default:
printk(KERN_ERR "%s: unexpected RTAS error %d\n",
- __FUNCTION__, rtas_rc);
+ __func__, rtas_rc);
rc = -ERANGE;
break;
}
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 538baf4..627f126 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -807,7 +807,7 @@
rtas_block_ctor);
if (!flash_block_cache) {
printk(KERN_ERR "%s: failed to create block cache\n",
- __FUNCTION__);
+ __func__);
rc = -ENOMEM;
goto cleanup;
}
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 433a0a0..3ab88a9 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -56,21 +56,6 @@
return 0;
}
-static int of_device_available(struct device_node * dn)
-{
- const char *status;
-
- status = of_get_property(dn, "status", NULL);
-
- if (!status)
- return 1;
-
- if (!strcmp(status, "okay"))
- return 1;
-
- return 0;
-}
-
int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
{
int returnval = -1;
@@ -117,7 +102,7 @@
for (dn = busdn->child; dn; dn = dn->sibling) {
struct pci_dn *pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_available(dn))
+ && of_device_is_available(dn))
return rtas_read_config(pdn, where, size, val);
}
@@ -164,7 +149,7 @@
for (dn = busdn->child; dn; dn = dn->sibling) {
struct pci_dn *pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_available(dn))
+ && of_device_is_available(dn))
return rtas_write_config(pdn, where, size, val);
}
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -326,7 +311,7 @@
res = b->resource[0];
if (!res->flags) {
- printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
b->name);
return 1;
}
@@ -334,13 +319,13 @@
rc = pcibios_unmap_io_space(b);
if (rc) {
printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
if (release_resource(res)) {
printk(KERN_ERR "%s: failed to release IO on bus %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
@@ -348,13 +333,13 @@
res = b->resource[i];
if (!res->flags && i == 0) {
printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
if (res->flags && release_resource(res)) {
printk(KERN_ERR
"%s: failed to release IO %d on bus %s\n",
- __FUNCTION__, i, b->name);
+ __func__, i, b->name);
return 1;
}
}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 6adb5a1..db540ea 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -34,6 +34,7 @@
#include <linux/serial_8250.h>
#include <linux/debugfs.h>
#include <linux/percpu.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
@@ -56,7 +57,6 @@
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/lmb.h>
#include <asm/xmon.h>
#include <asm/cputhreads.h>
@@ -167,6 +167,8 @@
unsigned short min;
if (cpu_id == NR_CPUS) {
+ struct device_node *root;
+ const char *model = NULL;
#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
unsigned long bogosum = 0;
int i;
@@ -178,6 +180,13 @@
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
if (ppc_md.name)
seq_printf(m, "platform\t: %s\n", ppc_md.name);
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ if (model)
+ seq_printf(m, "model\t\t: %s\n", model);
+ of_node_put(root);
+
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index cd870a8..eac936e 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -172,6 +172,18 @@
}
__setup("l2cr=", ppc_setup_l2cr);
+/* Checks "l3cr=xxxx" command-line option */
+int __init ppc_setup_l3cr(char *str)
+{
+ if (cpu_has_feature(CPU_FTR_L3CR)) {
+ unsigned long val = simple_strtoul(str, NULL, 0);
+ printk(KERN_INFO "l3cr set to %lx\n", val);
+ _set_L3CR(val); /* and enable it */
+ }
+ return 1;
+}
+__setup("l3cr=", ppc_setup_l3cr);
+
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 3b1529c..2c2d8315 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -33,6 +33,7 @@
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
@@ -55,7 +56,6 @@
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 4a4f5c6..9c3371e 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -368,11 +368,6 @@
error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
out:
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d3437c4..c21a626 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -21,13 +21,14 @@
#include <linux/elf.h>
#include <linux/security.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/sections.h>
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f9886725..b77f8af 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -139,7 +139,7 @@
*/
int vio_register_driver(struct vio_driver *viodrv)
{
- printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
+ printk(KERN_DEBUG "%s: driver %s registering\n", __func__,
viodrv->driver.name);
/* fill in 'struct driver' fields */
@@ -184,7 +184,7 @@
/* we need the 'device_type' property, in order to match with drivers */
if (of_node->type == NULL) {
printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
- __FUNCTION__,
+ __func__,
of_node->name ? of_node->name : "<unknown>");
return NULL;
}
@@ -192,7 +192,7 @@
unit_address = of_get_property(of_node, "reg", NULL);
if (unit_address == NULL) {
printk(KERN_WARNING "%s: node %s missing 'reg'\n",
- __FUNCTION__,
+ __func__,
of_node->name ? of_node->name : "<unknown>");
return NULL;
}
@@ -227,7 +227,7 @@
/* register with generic device framework */
if (device_register(&viodev->dev)) {
printk(KERN_ERR "%s: failed to register device %s\n",
- __FUNCTION__, viodev->dev.bus_id);
+ __func__, viodev->dev.bus_id);
/* XXX free TCE table */
kfree(viodev);
return NULL;
@@ -258,7 +258,7 @@
err = device_register(&vio_bus_device.dev);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
- __FUNCTION__, err);
+ __func__, err);
return err;
}
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index c4c622d..49eb1f1 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -75,6 +75,20 @@
beq 1b
blr
+_GLOBAL(strncmp)
+ PPC_LCMPI r5,0
+ beqlr
+ mtctr r5
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r5)
+ cmpwi 1,r3,0
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ beqlr 1
+ bdnzt eq,1b
+ blr
+
_GLOBAL(strlen)
addi r4,r3,-1
1: lbzu r0,1(r4)
diff --git a/arch/powerpc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c
index 41f0617..549baba 100644
--- a/arch/powerpc/math-emu/fabs.c
+++ b/arch/powerpc/math-emu/fabs.c
@@ -9,7 +9,7 @@
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index fc88364..7befbbf 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -14,7 +14,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
index 93025b6..2b346b3 100644
--- a/arch/powerpc/math-emu/fadds.c
+++ b/arch/powerpc/math-emu/fadds.c
@@ -15,7 +15,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index 4efac39..36d6890 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -15,7 +15,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+ printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
index b7e3317..53d9389 100644
--- a/arch/powerpc/math-emu/fcmpu.c
+++ b/arch/powerpc/math-emu/fcmpu.c
@@ -14,7 +14,7 @@
long cmp;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+ printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
index 3b3c98b..fcd7a95 100644
--- a/arch/powerpc/math-emu/fctiw.c
+++ b/arch/powerpc/math-emu/fctiw.c
@@ -16,7 +16,7 @@
frD[1] = r;
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
index 7717eb6..1514d59 100644
--- a/arch/powerpc/math-emu/fctiwz.c
+++ b/arch/powerpc/math-emu/fctiwz.c
@@ -23,7 +23,7 @@
__FPU_FPSCR = fpscr;
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index f2fba82..18a20fe 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -14,7 +14,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
@@ -28,13 +28,13 @@
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
ret |= EFLAG_VXZDZ;
#ifdef DEBUG
- printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
ret |= EFLAG_VXIDI;
#ifdef DEBUG
- printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index b971196..24feed6 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -15,7 +15,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
@@ -29,13 +29,13 @@
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
ret |= EFLAG_VXZDZ;
#ifdef DEBUG
- printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
ret |= EFLAG_VXIDI;
#ifdef DEBUG
- printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index 0a1dbce..dedb465 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -16,7 +16,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index 0f70bba..6bbb56d 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -17,7 +17,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c
index 28df700..bd55384 100644
--- a/arch/powerpc/math-emu/fmr.c
+++ b/arch/powerpc/math-emu/fmr.c
@@ -9,7 +9,7 @@
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index 203fd48..f311e2c 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -16,7 +16,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 8ce6862..81a716d 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -17,7 +17,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 66c7e79..2f3d327 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -14,7 +14,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 26bc427..962b588 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -15,7 +15,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c
index c6b913d..a7d34f3 100644
--- a/arch/powerpc/math-emu/fnabs.c
+++ b/arch/powerpc/math-emu/fnabs.c
@@ -9,7 +9,7 @@
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c
index fe9a98d..1e988cd 100644
--- a/arch/powerpc/math-emu/fneg.c
+++ b/arch/powerpc/math-emu/fneg.c
@@ -9,7 +9,7 @@
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 7f31227..8cf7827 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -16,7 +16,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index 65454c9..f1c4f0f 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -17,7 +17,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index f1ca748..98944e6 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -16,7 +16,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index 5c9a09a..b20f4eb 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -17,7 +17,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c
index ec11e46..10ecbd0 100644
--- a/arch/powerpc/math-emu/fres.c
+++ b/arch/powerpc/math-emu/fres.c
@@ -6,7 +6,7 @@
fres(void *frD, void *frB)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p\n", __func__, frD, frB);
#endif
return -ENOSYS;
}
diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
index d879b2a..724ccbc 100644
--- a/arch/powerpc/math-emu/frsp.c
+++ b/arch/powerpc/math-emu/frsp.c
@@ -12,7 +12,7 @@
FP_DECL_D(B);
#ifdef DEBUG
- printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c
index a11ae18..1d0a3a0 100644
--- a/arch/powerpc/math-emu/frsqrte.c
+++ b/arch/powerpc/math-emu/frsqrte.c
@@ -6,7 +6,7 @@
frsqrte(void *frD, void *frB)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p\n", __func__, frD, frB);
#endif
return 0;
}
diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
index e36e6e7..ecb5f28 100644
--- a/arch/powerpc/math-emu/fsel.c
+++ b/arch/powerpc/math-emu/fsel.c
@@ -11,7 +11,7 @@
FP_DECL_D(A);
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 6f8319f..38ec2b7 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -13,7 +13,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 3b2b1cf..335263e 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -14,7 +14,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 9566790..208d20f 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -14,7 +14,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index 3428117..0e61b80 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -15,7 +15,7 @@
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
index 7d38101..6ec90b5 100644
--- a/arch/powerpc/math-emu/lfd.c
+++ b/arch/powerpc/math-emu/lfd.c
@@ -11,7 +11,7 @@
if (copy_from_user(frD, ea, sizeof(double)))
return -EFAULT;
#ifdef DEBUG
- printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
+ printk("%s: D %p, ea %p: ", __func__, frD, ea);
dump_double(frD);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
index c86dee3..6f18ebe 100644
--- a/arch/powerpc/math-emu/lfs.c
+++ b/arch/powerpc/math-emu/lfs.c
@@ -14,7 +14,7 @@
float f;
#ifdef DEBUG
- printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
+ printk("%s: D %p, ea %p\n", __func__, frD, ea);
#endif
if (copy_from_user(&f, ea, sizeof(float)))
diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
index 106dd91..41ba247 100644
--- a/arch/powerpc/math-emu/mcrfs.c
+++ b/arch/powerpc/math-emu/mcrfs.c
@@ -10,7 +10,7 @@
u32 value, clear;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
+ printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
#endif
clear = 15 << ((7 - crfS) << 2);
@@ -24,7 +24,7 @@
*ccr |= (value << ((7 - crfD) << 2));
#ifdef DEBUG
- printk("CR: %08x\n", __FUNCTION__, *ccr);
+ printk("CR: %08x\n", __func__, *ccr);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
index f477c91..b0e2106 100644
--- a/arch/powerpc/math-emu/mffs.c
+++ b/arch/powerpc/math-emu/mffs.c
@@ -10,7 +10,7 @@
frD[1] = __FPU_FPSCR;
#ifdef DEBUG
- printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
+ printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
index 99bfd80..d306235 100644
--- a/arch/powerpc/math-emu/mtfsb0.c
+++ b/arch/powerpc/math-emu/mtfsb0.c
@@ -11,7 +11,7 @@
__FPU_FPSCR &= ~(1 << (31 - crbD));
#ifdef DEBUG
- printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+ printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
index 3d9e7ed..2e94870 100644
--- a/arch/powerpc/math-emu/mtfsb1.c
+++ b/arch/powerpc/math-emu/mtfsb1.c
@@ -11,7 +11,7 @@
__FPU_FPSCR |= (1 << (31 - crbD));
#ifdef DEBUG
- printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+ printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
index d70cf71..48014d8 100644
--- a/arch/powerpc/math-emu/mtfsf.c
+++ b/arch/powerpc/math-emu/mtfsf.c
@@ -38,7 +38,7 @@
__FPU_FPSCR |= (frB[1] & mask);
#ifdef DEBUG
- printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
+ printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
index 71df854..031e200 100644
--- a/arch/powerpc/math-emu/mtfsfi.c
+++ b/arch/powerpc/math-emu/mtfsfi.c
@@ -16,7 +16,7 @@
__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
#ifdef DEBUG
- printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
+ printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
#endif
return 0;
diff --git a/arch/powerpc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c
index 3f8c255..33a165c 100644
--- a/arch/powerpc/math-emu/stfd.c
+++ b/arch/powerpc/math-emu/stfd.c
@@ -7,7 +7,7 @@
{
#if 0
#ifdef DEBUG
- printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
+ printk("%s: S %p, ea %p: ", __func__, frS, ea);
dump_double(frS);
printk("\n");
#endif
diff --git a/arch/powerpc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c
index 95caaee..f15a35f 100644
--- a/arch/powerpc/math-emu/stfiwx.c
+++ b/arch/powerpc/math-emu/stfiwx.c
@@ -6,7 +6,7 @@
stfiwx(u32 *frS, void *ea)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frS, ea);
+ printk("%s: %p %p\n", __func__, frS, ea);
#endif
if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
index e87ca23..8689aa4 100644
--- a/arch/powerpc/math-emu/stfs.c
+++ b/arch/powerpc/math-emu/stfs.c
@@ -15,7 +15,7 @@
int err;
#ifdef DEBUG
- printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
+ printk("%s: S %p, ea %p\n", __func__, frS, ea);
#endif
__FP_UNPACK_D(A, frS);
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 41649a5d..1c00e01 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-y := fault.o mem.o lmb.o \
+obj-y := fault.o mem.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o \
mmu_context_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index a83dfa3..2b5a399 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,6 +31,7 @@
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/signal.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
@@ -41,7 +42,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
@@ -191,6 +192,29 @@
return ret < 0 ? ret : 0;
}
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
+ int psize, int ssize)
+{
+ unsigned long vaddr;
+ unsigned int step, shift;
+
+ shift = mmu_psize_defs[psize].shift;
+ step = 1 << shift;
+
+ if (!ppc_md.hpte_removebolted) {
+ printk(KERN_WARNING "Platform doesn't implement "
+ "hpte_removebolted\n");
+ return -EINVAL;
+ }
+
+ for (vaddr = vstart; vaddr < vend; vaddr += step)
+ ppc_md.hpte_removebolted(vaddr, psize, ssize);
+
+ return 0;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
static int __init htab_dt_scan_seg_sizes(unsigned long node,
const char *uname, int depth,
void *data)
@@ -434,6 +458,12 @@
_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
mmu_linear_psize, mmu_kernel_ssize));
}
+
+int remove_section_mapping(unsigned long start, unsigned long end)
+{
+ return htab_remove_mapping(start, end, mmu_linear_psize,
+ mmu_kernel_ssize);
+}
#endif /* CONFIG_MEMORY_HOTPLUG */
static inline void make_bl(unsigned int *insn_addr, void *func)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 977cb1e..0c66a9f 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,6 +30,7 @@
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -41,7 +42,6 @@
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
-#include <asm/lmb.h>
#include <asm/sections.h>
#include "mmu_decl.h"
@@ -276,7 +276,7 @@
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
- panic("%s: kmalloc failed\n", __FUNCTION__);
+ panic("%s: kmalloc failed\n", __func__);
/* must stay under 32 bits */
if ( 0xfffffffful - (unsigned long)__va(base) < size) {
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c0f5cff..5f55399 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -38,11 +38,11 @@
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/prom.h>
-#include <asm/lmb.h>
#include <asm/rtas.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
@@ -122,7 +122,7 @@
/* GFP_ATOMIC to avoid might_sleep warnings during boot */
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
- panic("%s: kmalloc failed\n", __FUNCTION__);
+ panic("%s: kmalloc failed\n", __func__);
kclist_add(kcore_mem, __va(base), size);
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index be5c506..e3349ea 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -31,6 +31,7 @@
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/suspend.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
@@ -42,7 +43,6 @@
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
-#include <asm/lmb.h>
#include <asm/sections.h>
#include <asm/vdso.h>
@@ -111,7 +111,7 @@
}
#endif
-int __devinit arch_add_memory(int nid, u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
{
struct pglist_data *pgdata;
struct zone *zone;
@@ -175,7 +175,6 @@
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_pgdat(pgdat) {
unsigned long flags;
pgdat_resize_lock(pgdat, &flags);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a300d25..1efd631 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,8 +17,9 @@
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
+#include <linux/lmb.h>
#include <asm/sparsemem.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/system.h>
#include <asm/smp.h>
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 5c45d47..72de3c7 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,11 +26,11 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/highmem.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/mmu.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
#include "mmu_decl.h"
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 50448d5..efbbd13 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,12 +12,14 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lmb.h>
+
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/paca.h>
#include <asm/cputable.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/firmware.h>
#include <asm/iseries/hv_call.h>
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 257b13c..2a9b4a0 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -68,7 +68,7 @@
if (spu_num >= num_spu_nodes) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Invalid index %d into spu info cache\n",
- __FUNCTION__, __LINE__, spu_num);
+ __func__, __LINE__, spu_num);
ret_info = NULL;
goto out;
}
@@ -115,7 +115,7 @@
if (!info) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: create vma_map failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
retval = -ENOMEM;
goto err_alloc;
}
@@ -123,7 +123,7 @@
if (!new_map) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: create vma_map failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
retval = -ENOMEM;
goto err_alloc;
}
@@ -171,7 +171,7 @@
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: "
"Invalid index %d into spu info cache\n",
- __FUNCTION__, __LINE__, spu_index);
+ __func__, __LINE__, spu_index);
goto out;
}
end = spu_index + 1;
@@ -273,7 +273,7 @@
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Cannot find dcookie for SPU binary\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto out;
}
@@ -467,7 +467,7 @@
if (ret) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: spu_switch_event_unregister returned %d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
goto out;
}
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 9a93217..fff6666 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -72,7 +72,7 @@
kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL);
if (!new) {
printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
vma_map_free(map);
return NULL;
}
@@ -134,19 +134,19 @@
if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_ident parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
if (ehdr.e_machine != EM_SPU) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_machine parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
if (ehdr.e_type != ET_EXEC) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_type parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
phdr_start = spu_elf_start + ehdr.e_phoff;
@@ -232,7 +232,7 @@
if (overlay_tbl_offset < 0) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Error finding SPU overlay table\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
ovly_table = spu_elf_start + overlay_tbl_offset;
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 9eed1f6..5ff4de3 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -216,7 +216,7 @@
* failure to stop OProfile.
*/
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
static int pm_rtas_activate_signals(u32 node, u32 count)
@@ -255,7 +255,7 @@
if (unlikely(ret)) {
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return -EIO;
}
}
@@ -560,7 +560,7 @@
if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
"%s: rtas token ibm,cbe-spu-perftools unknown\n",
- __FUNCTION__);
+ __func__);
return -EIO;
}
}
@@ -576,7 +576,7 @@
if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
"%s: rtas token ibm,cbe-perftools unknown\n",
- __FUNCTION__);
+ __func__);
return -EIO;
}
@@ -853,7 +853,7 @@
if (unlikely(ret)) {
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return -EIO;
}
@@ -949,7 +949,7 @@
if (unlikely(ret != 0)) {
printk(KERN_ERR
"%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
rtas_error = -EIO;
goto out;
}
@@ -1061,7 +1061,7 @@
if (unlikely(rtn_value != 0)) {
printk(KERN_ERR
"%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __FUNCTION__, rtn_value);
+ __func__, rtn_value);
}
/* Deactivate the signals */
diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c
index 13d1345..ae2e7f6 100644
--- a/arch/powerpc/platforms/40x/ep405.c
+++ b/arch/powerpc/platforms/40x/ep405.c
@@ -29,6 +29,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static struct device_node *bcsr_node;
static void __iomem *bcsr_regs;
@@ -119,5 +120,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
index f9206a7..1dd24ff 100644
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ b/arch/powerpc/platforms/40x/kilauea.c
@@ -1,7 +1,7 @@
/*
* Kilauea board specific routines
*
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* Based on the Walnut code by
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id kilauea_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
index 4e4df72..a6a1d60 100644
--- a/arch/powerpc/platforms/40x/makalu.c
+++ b/arch/powerpc/platforms/40x/makalu.c
@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id makalu_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 0422590..fc7fb00 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/ppc4xx.h>
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
{ .compatible = "xlnx,plb-v46-1.00.a", },
@@ -48,5 +49,6 @@
.probe = virtex_probe,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c
index b8b257e..335df91 100644
--- a/arch/powerpc/platforms/40x/walnut.c
+++ b/arch/powerpc/platforms/40x/walnut.c
@@ -26,6 +26,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
@@ -61,5 +62,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
index 42eabf8..dbc4d2b 100644
--- a/arch/powerpc/platforms/44x/44x.h
+++ b/arch/powerpc/platforms/44x/44x.h
@@ -3,6 +3,5 @@
extern u8 as1_readb(volatile u8 __iomem *addr);
extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
-extern void ppc44x_reset_system(char *cmd);
#endif /* __POWERPC_PLATFORMS_44X_44X_H */
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 1bfb219..6abe913 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -67,6 +67,25 @@
See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
Telephony Developers" link for more information.
+config CANYONLANDS
+ bool "Canyonlands"
+ depends on 44x
+ default n
+ select 460EX
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC460EX evaluation board.
+
+config YOSEMITE
+ bool "Yosemite"
+ depends on 44x
+ default n
+ select 440EP
+ select PCI
+ help
+ This option enables support for the AMCC PPC440EP evaluation board.
+
#config LUAN
# bool "Luan"
# depends on 44x
@@ -122,6 +141,14 @@
bool
select IBM_NEW_EMAC_EMAC4
+config 460EX
+ bool
+ select PPC_FPU
+ select IBM_NEW_EMAC_EMAC4
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
+ select IBM_NEW_EMAC_TAH
+
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 0864d4f..2320ae5 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -2,8 +2,10 @@
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_TAISHAN) += taishan.o
obj-$(CONFIG_BAMBOO) += bamboo.o
+obj-$(CONFIG_YOSEMITE) += bamboo.o
obj-$(CONFIG_SEQUOIA) += sequoia.o
obj-$(CONFIG_KATMAI) += katmai.o
obj-$(CONFIG_RAINIER) += rainier.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_WARP) += warp-nand.o
+obj-$(CONFIG_CANYONLANDS) += canyonlands.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
index fb9a22a..cef169e 100644
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ b/arch/powerpc/platforms/44x/bamboo.c
@@ -22,8 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id bamboo_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -53,11 +52,11 @@
}
define_machine(bamboo) {
- .name = "Bamboo",
- .probe = bamboo_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .name = "Bamboo",
+ .probe = bamboo_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 0000000..3949289
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,63 @@
+/*
+ * Canyonlands board specific routines
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Based on the Katmai code by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id canyonlands_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init canyonlands_device_probe(void)
+{
+ of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(canyonlands, canyonlands_device_probe);
+
+static int __init canyonlands_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
+ return 0;
+
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+ return 1;
+}
+
+define_machine(canyonlands) {
+ .name = "Canyonlands",
+ .probe = canyonlands_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c
index 1a8d467..a0e8fe4 100644
--- a/arch/powerpc/platforms/44x/ebony.c
+++ b/arch/powerpc/platforms/44x/ebony.c
@@ -26,8 +26,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id ebony_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -66,6 +65,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
index 1113412..44f4b3a 100644
--- a/arch/powerpc/platforms/44x/katmai.c
+++ b/arch/powerpc/platforms/44x/katmai.c
@@ -22,8 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id katmai_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -58,6 +57,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S
index 3bce71d..dc12b80 100644
--- a/arch/powerpc/platforms/44x/misc_44x.S
+++ b/arch/powerpc/platforms/44x/misc_44x.S
@@ -44,14 +44,3 @@
sync
isync
blr
-
-/*
- * void ppc44x_reset_system(char *cmd)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(ppc44x_reset_system)
- mfspr r13,SPRN_DBCR0
- oris r13,r13,DBCR0_RST_SYSTEM@h
- mtspr SPRN_DBCR0,r13
- b . /* Just in case the reset doesn't work */
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
index a7fae1c..4f1ff84 100644
--- a/arch/powerpc/platforms/44x/rainier.c
+++ b/arch/powerpc/platforms/44x/rainier.c
@@ -22,7 +22,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id rainier_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -57,6 +57,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
index d279db4..49eb73d 100644
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ b/arch/powerpc/platforms/44x/sequoia.c
@@ -23,7 +23,7 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id sequoia_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -58,6 +58,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
index 28ab7e2..49c78b2 100644
--- a/arch/powerpc/platforms/44x/taishan.c
+++ b/arch/powerpc/platforms/44x/taishan.c
@@ -29,8 +29,7 @@
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id taishan_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -68,6 +67,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 84ab78f..9150318 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,6 +11,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/ndfc.h>
+#include <asm/machdep.h>
#ifdef CONFIG_MTD_NAND_NDFC
@@ -100,6 +101,6 @@
return 0;
}
-device_initcall(warp_setup_nand_flash);
+machine_device_initcall(warp, warp_setup_nand_flash);
#endif
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index da5b7b7..39cf615 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -18,9 +18,7 @@
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-
-#include "44x.h"
-
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id warp_of_bus[] = {
{ .compatible = "ibm,plb4", },
@@ -49,7 +47,7 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 956f459..6d584f4 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -63,7 +63,7 @@
of_node_put(np);
if (!cdm) {
printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
- __FUNCTION__);
+ __func__);
return;
}
@@ -98,7 +98,7 @@
of_node_put(np);
if (!gpio) {
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
- __FUNCTION__);
+ __func__);
return;
}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7e76ddb..28bc6e5 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -46,6 +46,13 @@
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config KSI8560
+ bool "Emerson KSI8560"
+ select PPC_CPM_NEW_BINDING
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Emerson KSI8560 board
+
config STX_GP3
bool "Silicon Turnkey Express GP3"
help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index cb7af4e..6cea185 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -10,3 +10,4 @@
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
+obj-$(CONFIG_KSI8560) += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
new file mode 100644
index 0000000..2145ade
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -0,0 +1,257 @@
+/*
+ * Board setup routines for the Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc85xx_ads.c maintained by Kumar Gala
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+
+
+#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */
+#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */
+#define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */
+
+#define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */
+
+static void __iomem *cpld_base = NULL;
+
+static void machine_restart(char *cmd)
+{
+ if (cpld_base)
+ out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR);
+ else
+ printk(KERN_ERR "Can't find CPLD base, hang forever\n");
+
+ for (;;);
+}
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ int cascade_irq;
+
+ while ((cascade_irq = cpm2_get_irq()) >= 0)
+ generic_handle_irq(cascade_irq);
+
+ desc->chip->eoi(irq);
+}
+
+static void __init ksi8560_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+#ifdef CONFIG_CPM2
+ int irq;
+#endif
+
+ np = of_find_node_by_type(NULL, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+ /* Setup CPM2 PIC */
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
+ }
+ irq = irq_of_parse_and_map(np, 0);
+
+ cpm2_pic_init(np);
+ of_node_put(np);
+ set_irq_chained_handler(irq, cpm2_cascade);
+
+ setup_irq(0, NULL);
+#endif
+}
+
+#ifdef CONFIG_CPM2
+/*
+ * Setup I/O ports
+ */
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin __initdata ksi8560_pins[] = {
+ /* SCC1 */
+ {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* SCC2 */
+ {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC1 */
+ {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */
+ {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */
+
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) {
+ struct cpm_pin *pin = &ksi8560_pins[i];
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init ksi8560_setup_arch(void)
+{
+ struct device_node *cpld;
+
+ cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld");
+ if (cpld)
+ cpld_base = of_iomap(cpld, 0);
+ else
+ printk(KERN_ERR "Can't find CPLD in device tree\n");
+
+ if (ppc_md.progress)
+ ppc_md.progress("ksi8560_setup_arch()", 0);
+
+#ifdef CONFIG_CPM2
+ cpm2_reset();
+ init_ioports();
+#endif
+}
+
+static void ksi8560_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Emerson Network Power\n");
+ seq_printf(m, "Board\t\t: KSI8560\n");
+
+ if (cpld_base) {
+ seq_printf(m, "Hardware rev\t: %d\n",
+ in_8(cpld_base + KSI8560_CPLD_HVR));
+ seq_printf(m, "CPLD rev\t: %d\n",
+ in_8(cpld_base + KSI8560_CPLD_PVR));
+ } else
+ seq_printf(m, "Unknown Hardware and CPLD revs\n");
+
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .type = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(ksi8560, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ksi8560_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "emerson,KSI8560");
+}
+
+define_machine(ksi8560) {
+ .name = "KSI8560",
+ .probe = ksi8560_probe,
+ .setup_arch = ksi8560_setup_arch,
+ .init_IRQ = ksi8560_pic_init,
+ .show_cpuinfo = ksi8560_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = machine_restart,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index bdb3d0b..2865d01 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -36,7 +36,7 @@
#undef DEBUG
#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define DBG(fmt, args...)
#endif
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 184f998..0d9f75c 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -111,17 +111,12 @@
/* Processor frequency is MHz.
*/
- ppc_tb_freq = 50000000;
- if (!get_freq("bus-frequency", &ppc_tb_freq)) {
- printk(KERN_ERR "WARNING: Estimating decrementer frequency "
- "(not found)\n");
- }
- ppc_tb_freq /= 16;
ppc_proc_freq = 50000000;
if (!get_freq("clock-frequency", &ppc_proc_freq))
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
+ ppc_tb_freq = ppc_proc_freq / 16;
printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
/* Perform some more timer/timebase initialization. This used
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 0c3face..5fc7fac 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -41,11 +41,13 @@
bool "AMCC 40x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
+ select 4xx_SOC
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
+ select 4xx_SOC
config E200
bool "Freescale e200"
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index d75ccde..45646b2 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -28,13 +28,13 @@
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/udbg.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/cell-regs.h>
@@ -316,7 +316,7 @@
segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
pr_debug("%s: iommu[%d]: segments: %lu\n",
- __FUNCTION__, iommu->nid, segments);
+ __func__, iommu->nid, segments);
/* set up the segment table */
stab_size = segments * sizeof(unsigned long);
@@ -343,7 +343,7 @@
(1 << 12) / sizeof(unsigned long));
ptab_size = segments * pages_per_segment * sizeof(unsigned long);
- pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
+ pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
iommu->nid, ptab_size, get_order(ptab_size));
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
BUG_ON(!page);
@@ -355,7 +355,7 @@
n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
- __FUNCTION__, iommu->nid, iommu->stab, ptab,
+ __func__, iommu->nid, iommu->stab, ptab,
n_pte_pages);
/* initialise the STEs */
@@ -394,7 +394,7 @@
if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
panic("%s: missing IOC register mappings for node %d\n",
- __FUNCTION__, iommu->nid);
+ __func__, iommu->nid);
iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 0304589..8a3631c 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -65,7 +65,7 @@
break;
default:
printk(KERN_WARNING "%s: unknown configuration\n",
- __FUNCTION__);
+ __func__);
break;
}
mtspr(SPRN_TSC_CELL, thread_switch_control);
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index e43024c..655704a 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -132,7 +132,7 @@
(unsigned int)(addr >> 32),
(unsigned int)(addr & 0xffffffff))) {
printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
- __FUNCTION__, nid);
+ __func__, nid);
goto out_free_pages;
}
@@ -162,7 +162,7 @@
if (!size)
return -ENODEV;
- pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
+ pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size);
order = get_order(*size);
of_node_put(np);
@@ -180,7 +180,7 @@
const u32 *nid = of_get_property(np, "node-id", NULL);
if (!nid) {
printk(KERN_ERR "%s: node %s is missing node-id?\n",
- __FUNCTION__, np->full_name);
+ __func__, np->full_name);
continue;
}
cbe_ptcal_enable_on_node(*nid, order);
@@ -195,13 +195,13 @@
struct ptcal_area *area, *tmp;
int ret = 0;
- pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
+ pr_debug("%s: disabling PTCAL\n", __func__);
list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
/* disable ptcal on this node */
if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
printk(KERN_ERR "%s: error disabling PTCAL "
- "on node %d!\n", __FUNCTION__,
+ "on node %d!\n", __func__,
area->nid);
ret = -EIO;
continue;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 712001f..6bab44b 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -165,7 +165,7 @@
struct spu_slb slb;
int psize;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
@@ -215,7 +215,7 @@
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
- pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
+ pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
/* Handle kernel space hash faults immediately.
User hash faults need to be deferred to process context. */
@@ -351,7 +351,7 @@
__spu_trap_data_seg(spu, dar);
spin_unlock(&spu->register_lock);
- pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+ pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
dar, dsisr);
if (stat & CLASS1_STORAGE_FAULT_INTR)
@@ -726,7 +726,7 @@
if (ret < 0) {
printk(KERN_WARNING "%s: Error initializing spus\n",
- __FUNCTION__);
+ __func__);
goto out_unregister_sysdev_class;
}
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index dceb8b6..19f6bfd 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -54,7 +54,7 @@
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
- pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+ pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
return -ENOSYS;
}
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index d351bde..4c506c1 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -92,7 +92,7 @@
tmp = of_get_property(np->parent->parent, "node-id", NULL);
if (!tmp) {
- printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: can't find node-id\n", __func__);
nid = spu->node;
} else
nid = tmp[0];
@@ -296,7 +296,7 @@
ret = fn(node);
if (ret) {
printk(KERN_WARNING "%s: Error initializing %s\n",
- __FUNCTION__, node->name);
+ __func__, node->name);
break;
}
n++;
@@ -327,7 +327,7 @@
if (!legacy_map) {
legacy_map = 1;
printk(KERN_WARNING "%s: Legacy device tree found, "
- "trying to map old style\n", __FUNCTION__);
+ "trying to map old style\n", __func__);
}
ret = spu_map_device_old(spu);
if (ret) {
@@ -342,7 +342,7 @@
if (!legacy_irq) {
legacy_irq = 1;
printk(KERN_WARNING "%s: Legacy device tree found, "
- "trying old style irq\n", __FUNCTION__);
+ "trying old style irq\n", __func__);
}
ret = spu_map_interrupts_old(spu, spe);
if (ret) {
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index f7a7e86..f14d3a0 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1556,7 +1556,7 @@
wake_up_all(&ctx->mfc_wq);
- pr_debug("%s %s\n", __FUNCTION__, spu->name);
+ pr_debug("%s %s\n", __func__, spu->name);
if (ctx->mfc_fasync) {
u32 free_elements, tagstatus;
unsigned int mask;
@@ -1790,7 +1790,7 @@
if (tagstatus & ctx->tagwait)
mask |= POLLIN | POLLRDNORM;
- pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+ pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__,
free_elements, tagstatus, ctx->tagwait);
return mask;
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index cac69e1..5986d08 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -98,7 +98,7 @@
!= MFC_CNTL_PURGE_DMA_COMPLETE) {
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
- __FUNCTION__);
+ __func__);
ret = -EIO;
goto out;
}
@@ -124,7 +124,7 @@
status_loading) {
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: timeout waiting for loader\n",
- __FUNCTION__);
+ __func__);
ret = -EIO;
goto out_drop_priv;
}
@@ -134,7 +134,7 @@
if (!(status & SPU_STATUS_RUNNING)) {
/* If isolated LOAD has failed: run SPU, we will get a stop-and
* signal later. */
- pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
+ pr_debug("%s: isolated LOAD failed\n", __func__);
ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
ret = -EACCES;
goto out_drop_priv;
@@ -142,7 +142,7 @@
if (!(status & SPU_STATUS_ISOLATED_STATE)) {
/* This isn't allowed by the CBEA, but check anyway */
- pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
+ pr_debug("%s: SPU fell out of isolated mode?\n", __func__);
ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
ret = -EINVAL;
goto out_drop_priv;
@@ -282,7 +282,7 @@
break;
default:
printk(KERN_WARNING "%s: unexpected return code %ld\n",
- __FUNCTION__, *spu_ret);
+ __func__, *spu_ret);
ret = 0;
}
return ret;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d4f8bf5..84e2d78 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -117,11 +117,11 @@
}
if (mpic_paddr == 0) {
- printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+ printk("%s: No tsi108 PIC found !\n", __func__);
return;
}
- DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
+ DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
(u32) mpic_paddr);
mpic = mpic_alloc(tsi_pic, mpic_paddr,
@@ -140,17 +140,17 @@
#ifdef CONFIG_PCI
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == NULL) {
- printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+ printk("%s: No tsi108 pci node found !\n", __func__);
return;
}
cascade_node = of_find_node_by_type(NULL, "pic-router");
if (cascade_node == NULL) {
- printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
+ printk("%s: No tsi108 pci cascade node found !\n", __func__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
- DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
+ DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
(u32) cascade_pci_irq);
tsi108_pci_int_init(cascade_node);
set_irq_data(cascade_pci_irq, mpic);
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index cc562e4..02a634f 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -23,6 +23,7 @@
#undef DEBUG
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
@@ -586,7 +587,7 @@
static unsigned long last_jiffies;
static int num_printed;
- if ((jiffies - last_jiffies) > 60 * HZ) {
+ if (time_after(jiffies, last_jiffies + 60 * HZ)) {
last_jiffies = jiffies;
num_printed = 0;
}
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 3ffa0ac..3018552 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -592,50 +592,3 @@
}
return irq;
}
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
- if (!machine_is(maple))
- return;
-
-#if 0 /* Enable this to enable IDE port 0 */
- {
- u8 v;
-
- pci_read_config_byte(dev, 0x40, &v);
- v |= 2;
- pci_write_config_byte(dev, 0x40, v);
- }
-#endif
-#if 0 /* fix bus master base */
- pci_write_config_dword(dev, 0x20, 0xcc01);
- printk("old ide resource: %lx -> %lx \n",
- dev->resource[4].start, dev->resource[4].end);
- dev->resource[4].start = 0xcc00;
- dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
- {
- struct pci_dev *apicdev;
- u32 v;
-
- apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
- if (apicdev == NULL)
- printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
- else {
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_dev_put(apicdev);
- }
- }
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
- fixup_maple_ide);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3ce2d73..3647147 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -43,6 +43,7 @@
#include <linux/smp.h>
#include <linux/bitops.h>
#include <linux/of_device.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/sections.h>
@@ -57,7 +58,6 @@
#include <asm/dma.h>
#include <asm/cputable.h>
#include <asm/time.h>
-#include <asm/lmb.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
#include <asm/udbg.h>
@@ -319,7 +319,7 @@
return 1;
}
-define_machine(maple_md) {
+define_machine(maple) {
.name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index c529d8d..217af32 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -17,6 +17,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -26,6 +27,8 @@
#define MAX_TXCH 64
#define MAX_RXCH 64
+#define MAX_FLAGS 64
+#define MAX_FUN 8
static struct pasdma_status *dma_status;
@@ -43,6 +46,8 @@
static DECLARE_BITMAP(txch_free, MAX_TXCH);
static DECLARE_BITMAP(rxch_free, MAX_RXCH);
+static DECLARE_BITMAP(flags_free, MAX_FLAGS);
+static DECLARE_BITMAP(fun_free, MAX_FUN);
/* pasemi_read_iob_reg - read IOB register
* @reg: Register to read (offset into PCI CFG space)
@@ -373,6 +378,106 @@
}
EXPORT_SYMBOL(pasemi_dma_free_buf);
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+ *
+ * Allocates a flag for use with channel syncronization (event descriptors).
+ * Returns allocated flag (0-63), < 0 on error.
+ */
+int pasemi_dma_alloc_flag(void)
+{
+ int bit;
+
+retry:
+ bit = find_next_bit(flags_free, MAX_FLAGS, 0);
+ if (bit >= MAX_FLAGS)
+ return -ENOSPC;
+ if (!test_and_clear_bit(bit, flags_free))
+ goto retry;
+
+ return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_flag);
+
+
+/* pasemi_dma_free_flag - Deallocates a flag (event)
+ * @flag: Flag number to deallocate
+ *
+ * Frees up a flag so it can be reused for other purposes.
+ */
+void pasemi_dma_free_flag(int flag)
+{
+ BUG_ON(test_bit(flag, flags_free));
+ BUG_ON(flag >= MAX_FLAGS);
+ set_bit(flag, flags_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_flag);
+
+
+/* pasemi_dma_set_flag - Sets a flag (event) to 1
+ * @flag: Flag number to set active
+ *
+ * Sets the flag provided to 1.
+ */
+void pasemi_dma_set_flag(int flag)
+{
+ BUG_ON(flag >= MAX_FLAGS);
+ if (flag < 32)
+ pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
+ else
+ pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_set_flag);
+
+/* pasemi_dma_clear_flag - Sets a flag (event) to 0
+ * @flag: Flag number to set inactive
+ *
+ * Sets the flag provided to 0.
+ */
+void pasemi_dma_clear_flag(int flag)
+{
+ BUG_ON(flag >= MAX_FLAGS);
+ if (flag < 32)
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
+ else
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_clear_flag);
+
+/* pasemi_dma_alloc_fun - Allocate a function engine
+ *
+ * Allocates a function engine to use for crypto/checksum offload
+ * Returns allocated engine (0-8), < 0 on error.
+ */
+int pasemi_dma_alloc_fun(void)
+{
+ int bit;
+
+retry:
+ bit = find_next_bit(fun_free, MAX_FLAGS, 0);
+ if (bit >= MAX_FLAGS)
+ return -ENOSPC;
+ if (!test_and_clear_bit(bit, fun_free))
+ goto retry;
+
+ return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_fun);
+
+
+/* pasemi_dma_free_fun - Deallocates a function engine
+ * @flag: Engine number to deallocate
+ *
+ * Frees up a function engine so it can be used for other purposes.
+ */
+void pasemi_dma_free_fun(int fun)
+{
+ BUG_ON(test_bit(fun, fun_free));
+ BUG_ON(fun >= MAX_FLAGS);
+ set_bit(fun, fun_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_fun);
+
+
static void *map_onedev(struct pci_dev *p, int index)
{
struct device_node *dn;
@@ -410,6 +515,7 @@
struct resource res;
struct device_node *dn;
int i, intf, err = 0;
+ unsigned long timeout;
u32 tmp;
if (!machine_is(pasemi))
@@ -478,6 +584,44 @@
for (i = 0; i < MAX_RXCH; i++)
__set_bit(i, rxch_free);
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable RX section\n");
+ break;
+ }
+ }
+
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable TX section\n");
+ break;
+ }
+ }
+
+ /* setup resource allocations for the different DMA sections */
+ tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
+ pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
+
+ /* enable tx section */
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+ /* enable rx section */
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+
+ for (i = 0; i < MAX_FLAGS; i++)
+ __set_bit(i, flags_free);
+
+ for (i = 0; i < MAX_FUN; i++)
+ __set_bit(i, fun_free);
+
+ /* clear all status flags */
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
+
printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
"(%d tx, %d rx channels)\n", num_txch, num_rxch);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 36ff1b6..59404ba 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -53,6 +53,7 @@
#include <linux/suspend.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/reg.h>
#include <asm/sections.h>
@@ -74,7 +75,6 @@
#include <asm/iommu.h>
#include <asm/smu.h>
#include <asm/pmc.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include "pmac.h"
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 9d251d0..3866deb 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -499,41 +499,14 @@
}
/**
- * ps3_register_repository_device - Register a device from the repositiory info.
- *
+ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
*/
-static int ps3_register_repository_device(
- const struct ps3_repository_device *repo)
+static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
{
int result;
switch (repo->dev_type) {
- case PS3_DEV_TYPE_SB_GELIC:
- result = ps3_setup_gelic_device(repo);
- if (result) {
- pr_debug("%s:%d ps3_setup_gelic_device failed\n",
- __func__, __LINE__);
- }
- break;
- case PS3_DEV_TYPE_SB_USB:
-
- /* Each USB device has both an EHCI and an OHCI HC */
-
- result = ps3_setup_ehci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ehci_device failed\n",
- __func__, __LINE__);
- }
-
- result = ps3_setup_ohci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ohci_device failed\n",
- __func__, __LINE__);
- }
- break;
case PS3_DEV_TYPE_STOR_DISK:
result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
@@ -572,6 +545,48 @@
return result;
}
+/**
+ * ps3_setup_static_device - Setup a static device from the repository
+ */
+
+static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
+{
+ int result;
+
+ switch (repo->dev_type) {
+ case PS3_DEV_TYPE_SB_GELIC:
+ result = ps3_setup_gelic_device(repo);
+ if (result) {
+ pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+ case PS3_DEV_TYPE_SB_USB:
+
+ /* Each USB device has both an EHCI and an OHCI HC */
+
+ result = ps3_setup_ehci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+ __func__, __LINE__);
+ }
+
+ result = ps3_setup_ohci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+
+ default:
+ return ps3_setup_dynamic_device(repo);
+ }
+
+ return result;
+}
+
static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
{
struct ps3_repository_device repo;
@@ -601,7 +616,7 @@
pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
__func__, __LINE__, bus_id, dev_id, retries);
- ps3_register_repository_device(&repo);
+ ps3_setup_dynamic_device(&repo);
return;
}
@@ -905,8 +920,7 @@
ps3_register_graphics_devices();
- ps3_repository_find_devices(PS3_BUS_TYPE_SB,
- ps3_register_repository_device);
+ ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
ps3_register_sound_devices();
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 7382f19..1cf901f 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,9 +19,10 @@
*/
#include <linux/kernel.h>
+#include <linux/lmb.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <asm/ps3fb.h>
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 3a6db04..a14e5cd 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -709,7 +709,7 @@
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
- if (unlikely(plug) == NO_IRQ) {
+ if (unlikely(plug == NO_IRQ)) {
pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 6890047..5b3fb2b 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,9 +21,10 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
+#include <linux/lmb.h>
#include <asm/firmware.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index b9ea09d..c73379e 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,8 +24,9 @@
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
+#include <linux/lmb.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include "platform.h"
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 5c2cbb0..a413abb 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -95,6 +95,14 @@
ps3_sys_manager_power_off(); /* never returns */
}
+static void ps3_halt(void)
+{
+ DBG("%s:%d\n", __func__, __LINE__);
+
+ smp_send_stop();
+ ps3_sys_manager_halt(); /* never returns */
+}
+
static void ps3_panic(char *str)
{
DBG("%s:%d %s\n", __func__, __LINE__, str);
@@ -105,7 +113,8 @@
printk(" Please press POWER button.\n");
printk("\n");
- while(1);
+ while(1)
+ lv1_pause(1);
}
#if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \
@@ -117,7 +126,7 @@
p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
if (!p->address) {
- printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: Cannot allocate %s\n", __func__,
p->name);
return;
}
@@ -266,6 +275,7 @@
.progress = ps3_progress,
.restart = ps3_restart,
.power_off = ps3_power_off,
+ .halt = ps3_halt,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
.machine_kexec = default_machine_kexec,
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 5ad4118..d135cef 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -27,6 +27,7 @@
#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/lv1call.h>
+#include <asm/ps3.h>
#include "../cell/spufs/spufs.h"
#include "platform.h"
@@ -140,6 +141,12 @@
pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow);
}
+inline u64 ps3_get_spe_id(void *arg)
+{
+ return spu_pdata(arg)->spe_id;
+}
+EXPORT_SYMBOL_GPL(ps3_get_spe_id);
+
static unsigned long get_vas_id(void)
{
unsigned long id;
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 992ba67..bdae04b 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -18,3 +18,4 @@
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
+obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9eb539e..550b2f7d 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -945,7 +945,6 @@
unsigned int rets[3];
struct eeh_early_enable_info *info = data;
int ret;
- const char *status = of_get_property(dn, "status", NULL);
const u32 *class_code = of_get_property(dn, "class-code", NULL);
const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
const u32 *device_id = of_get_property(dn, "device-id", NULL);
@@ -959,8 +958,8 @@
pdn->eeh_freeze_count = 0;
pdn->eeh_false_positives = 0;
- if (status && strncmp(status, "ok", 2) != 0)
- return NULL; /* ignore devices with bad status */
+ if (!of_device_is_available(dn))
+ return NULL;
/* Ignore bad nodes. */
if (!class_code || !vendor_id || !device_id)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 9a455d4..233d9be 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -520,6 +520,20 @@
BUG_ON(lpar_rc != H_SUCCESS);
}
+static void pSeries_lpar_hpte_removebolted(unsigned long ea,
+ int psize, int ssize)
+{
+ unsigned long slot, vsid, va;
+
+ vsid = get_kernel_vsid(ea, ssize);
+ va = hpt_va(ea, vsid, ssize);
+
+ slot = pSeries_lpar_hpte_find(va, psize, ssize);
+ BUG_ON(slot == -1);
+
+ pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
+}
+
/* Flag bits for H_BULK_REMOVE */
#define HBR_REQUEST 0x4000000000000000UL
#define HBR_RESPONSE 0x8000000000000000UL
@@ -597,6 +611,7 @@
ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
ppc_md.hpte_insert = pSeries_lpar_hpte_insert;
ppc_md.hpte_remove = pSeries_lpar_hpte_remove;
+ ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range;
ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear;
}
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5a5a19e..0d7229c 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -123,7 +123,7 @@
/* Add to children of PCI bridge dev->bus */
child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
if (!child_bus) {
- printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
+ printk (KERN_ERR "%s: could not add second bus\n", __func__);
return -EIO;
}
sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
new file mode 100644
index 0000000..7ddd105
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -0,0 +1,498 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/sysfs.h>
+
+#include <asm/page.h>
+#include <asm/phyp_dump.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/* Variables, used to communicate data between early boot and late boot */
+static struct phyp_dump phyp_dump_vars;
+struct phyp_dump *phyp_dump_info = &phyp_dump_vars;
+
+static int ibm_configure_kernel_dump;
+/* ------------------------------------------------- */
+/* RTAS interfaces to declare the dump regions */
+
+struct dump_section {
+ u32 dump_flags;
+ u16 source_type;
+ u16 error_flags;
+ u64 source_address;
+ u64 source_length;
+ u64 length_copied;
+ u64 destination_address;
+};
+
+struct phyp_dump_header {
+ u32 version;
+ u16 num_of_sections;
+ u16 status;
+
+ u32 first_offset_section;
+ u32 dump_disk_section;
+ u64 block_num_dd;
+ u64 num_of_blocks_dd;
+ u32 offset_dd;
+ u32 maxtime_to_auto;
+ /* No dump disk path string used */
+
+ struct dump_section cpu_data;
+ struct dump_section hpte_data;
+ struct dump_section kernel_data;
+};
+
+/* The dump header *must be* in low memory, so .bss it */
+static struct phyp_dump_header phdr;
+
+#define NUM_DUMP_SECTIONS 3
+#define DUMP_HEADER_VERSION 0x1
+#define DUMP_REQUEST_FLAG 0x1
+#define DUMP_SOURCE_CPU 0x0001
+#define DUMP_SOURCE_HPTE 0x0002
+#define DUMP_SOURCE_RMO 0x0011
+#define DUMP_ERROR_FLAG 0x2000
+#define DUMP_TRIGGERED 0x4000
+#define DUMP_PERFORMED 0x8000
+
+
+/**
+ * init_dump_header() - initialize the header declaring a dump
+ * Returns: length of dump save area.
+ *
+ * When the hypervisor saves crashed state, it needs to put
+ * it somewhere. The dump header tells the hypervisor where
+ * the data can be saved.
+ */
+static unsigned long init_dump_header(struct phyp_dump_header *ph)
+{
+ unsigned long addr_offset = 0;
+
+ /* Set up the dump header */
+ ph->version = DUMP_HEADER_VERSION;
+ ph->num_of_sections = NUM_DUMP_SECTIONS;
+ ph->status = 0;
+
+ ph->first_offset_section =
+ (u32)offsetof(struct phyp_dump_header, cpu_data);
+ ph->dump_disk_section = 0;
+ ph->block_num_dd = 0;
+ ph->num_of_blocks_dd = 0;
+ ph->offset_dd = 0;
+
+ ph->maxtime_to_auto = 0; /* disabled */
+
+ /* The first two sections are mandatory */
+ ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->cpu_data.source_type = DUMP_SOURCE_CPU;
+ ph->cpu_data.source_address = 0;
+ ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
+ ph->cpu_data.destination_address = addr_offset;
+ addr_offset += phyp_dump_info->cpu_state_size;
+
+ ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
+ ph->hpte_data.source_address = 0;
+ ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
+ ph->hpte_data.destination_address = addr_offset;
+ addr_offset += phyp_dump_info->hpte_region_size;
+
+ /* This section describes the low kernel region */
+ ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->kernel_data.source_type = DUMP_SOURCE_RMO;
+ ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
+ ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
+ ph->kernel_data.destination_address = addr_offset;
+ addr_offset += ph->kernel_data.source_length;
+
+ return addr_offset;
+}
+
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+ printk(KERN_INFO "dump header:\n");
+ /* setup some ph->sections required */
+ printk(KERN_INFO "version = %d\n", ph->version);
+ printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+ printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+ /* No ph->disk, so all should be set to 0 */
+ printk(KERN_INFO "Offset to first section 0x%x\n",
+ ph->first_offset_section);
+ printk(KERN_INFO "dump disk sections should be zero\n");
+ printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+ printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+ printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+ printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+ printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+ /*set cpu state and hpte states as well scratch pad area */
+ printk(KERN_INFO " CPU AREA \n");
+ printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+ printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+ printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+ printk(KERN_INFO "cpu source_address =%lx\n",
+ ph->cpu_data.source_address);
+ printk(KERN_INFO "cpu source_length =%lx\n",
+ ph->cpu_data.source_length);
+ printk(KERN_INFO "cpu length_copied =%lx\n",
+ ph->cpu_data.length_copied);
+
+ printk(KERN_INFO " HPTE AREA \n");
+ printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+ printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+ printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+ printk(KERN_INFO "HPTE source_address =%lx\n",
+ ph->hpte_data.source_address);
+ printk(KERN_INFO "HPTE source_length =%lx\n",
+ ph->hpte_data.source_length);
+ printk(KERN_INFO "HPTE length_copied =%lx\n",
+ ph->hpte_data.length_copied);
+
+ printk(KERN_INFO " SRSD AREA \n");
+ printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+ printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+ printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+ printk(KERN_INFO "SRSD source_address =%lx\n",
+ ph->kernel_data.source_address);
+ printk(KERN_INFO "SRSD source_length =%lx\n",
+ ph->kernel_data.source_length);
+ printk(KERN_INFO "SRSD length_copied =%lx\n",
+ ph->kernel_data.length_copied);
+#endif
+}
+
+static ssize_t show_phyp_dump_active(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+
+ /* create filesystem entry so kdump is phyp-dump aware */
+ return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot);
+}
+
+static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600,
+ show_phyp_dump_active,
+ NULL);
+
+static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
+{
+ int rc;
+
+ /* Add addr value if not initialized before */
+ if (ph->cpu_data.destination_address == 0) {
+ ph->cpu_data.destination_address += addr;
+ ph->hpte_data.destination_address += addr;
+ ph->kernel_data.destination_address += addr;
+ }
+
+ /* ToDo Invalidate kdump and free memory range. */
+
+ do {
+ rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+ 1, ph, sizeof(struct phyp_dump_header));
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
+ "register\n", rc);
+ print_dump_header(ph);
+ return;
+ }
+
+ rc = sysfs_create_file(kernel_kobj, &pdl.attr);
+ if (rc)
+ printk(KERN_ERR "phyp-dump: unable to create sysfs"
+ " file (%d)\n", rc);
+}
+
+static
+void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
+{
+ int rc;
+
+ /* Add addr value if not initialized before */
+ if (ph->cpu_data.destination_address == 0) {
+ ph->cpu_data.destination_address += addr;
+ ph->hpte_data.destination_address += addr;
+ ph->kernel_data.destination_address += addr;
+ }
+
+ do {
+ rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+ 2, ph, sizeof(struct phyp_dump_header));
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_ERR "phyp-dump: unexpected error (%d) "
+ "on invalidate\n", rc);
+ print_dump_header(ph);
+ }
+}
+
+/* ------------------------------------------------- */
+/**
+ * release_memory_range -- release memory previously lmb_reserved
+ * @start_pfn: starting physical frame number
+ * @nr_pages: number of pages to free.
+ *
+ * This routine will release memory that had been previously
+ * lmb_reserved in early boot. The released memory becomes
+ * available for genreal use.
+ */
+static void release_memory_range(unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ struct page *rpage;
+ unsigned long end_pfn;
+ long i;
+
+ end_pfn = start_pfn + nr_pages;
+
+ for (i = start_pfn; i <= end_pfn; i++) {
+ rpage = pfn_to_page(i);
+ if (PageReserved(rpage)) {
+ ClearPageReserved(rpage);
+ init_page_count(rpage);
+ __free_page(rpage);
+ totalram_pages++;
+ }
+ }
+}
+
+/**
+ * track_freed_range -- Counts the range being freed.
+ * Once the counter goes to zero, it re-registers dump for
+ * future use.
+ */
+static void
+track_freed_range(unsigned long addr, unsigned long length)
+{
+ static unsigned long scratch_area_size, reserved_area_size;
+
+ if (addr < phyp_dump_info->init_reserve_start)
+ return;
+
+ if ((addr >= phyp_dump_info->init_reserve_start) &&
+ (addr <= phyp_dump_info->init_reserve_start +
+ phyp_dump_info->init_reserve_size))
+ reserved_area_size += length;
+
+ if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
+ (addr <= phyp_dump_info->reserved_scratch_addr +
+ phyp_dump_info->reserved_scratch_size))
+ scratch_area_size += length;
+
+ if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
+ (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
+
+ invalidate_last_dump(&phdr,
+ phyp_dump_info->reserved_scratch_addr);
+ register_dump_area(&phdr,
+ phyp_dump_info->reserved_scratch_addr);
+ }
+}
+
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ * "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ * "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t store_release_region(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long start_addr, length, end_addr;
+ unsigned long start_pfn, nr_pages;
+ ssize_t ret;
+
+ ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+ if (ret != 2)
+ return -EINVAL;
+
+ track_freed_range(start_addr, length);
+
+ /* Range-check - don't free any reserved memory that
+ * wasn't reserved for phyp-dump */
+ if (start_addr < phyp_dump_info->init_reserve_start)
+ start_addr = phyp_dump_info->init_reserve_start;
+
+ end_addr = phyp_dump_info->init_reserve_start +
+ phyp_dump_info->init_reserve_size;
+ if (start_addr+length > end_addr)
+ length = end_addr - start_addr;
+
+ /* Release the region of memory assed in by user */
+ start_pfn = PFN_DOWN(start_addr);
+ nr_pages = PFN_DOWN(length);
+ release_memory_range(start_pfn, nr_pages);
+
+ return count;
+}
+
+static ssize_t show_release_region(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ u64 second_addr_range;
+
+ /* total reserved size - start of scratch area */
+ second_addr_range = phyp_dump_info->init_reserve_size -
+ phyp_dump_info->reserved_scratch_size;
+ return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
+ " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+ phdr.cpu_data.destination_address,
+ phdr.cpu_data.length_copied,
+ phdr.hpte_data.destination_address,
+ phdr.hpte_data.length_copied,
+ phdr.kernel_data.destination_address,
+ phdr.kernel_data.length_copied,
+ phyp_dump_info->init_reserve_start,
+ second_addr_range);
+}
+
+static struct kobj_attribute rr = __ATTR(release_region, 0600,
+ show_release_region,
+ store_release_region);
+
+static int __init phyp_dump_setup(void)
+{
+ struct device_node *rtas;
+ const struct phyp_dump_header *dump_header = NULL;
+ unsigned long dump_area_start;
+ unsigned long dump_area_length;
+ int header_len = 0;
+ int rc;
+
+ /* If no memory was reserved in early boot, there is nothing to do */
+ if (phyp_dump_info->init_reserve_size == 0)
+ return 0;
+
+ /* Return if phyp dump not supported */
+ if (!phyp_dump_info->phyp_dump_configured)
+ return -ENOSYS;
+
+ /* Is there dump data waiting for us? If there isn't,
+ * then register a new dump area, and release all of
+ * the rest of the reserved ram.
+ *
+ * The /rtas/ibm,kernel-dump rtas node is present only
+ * if there is dump data waiting for us.
+ */
+ rtas = of_find_node_by_path("/rtas");
+ if (rtas) {
+ dump_header = of_get_property(rtas, "ibm,kernel-dump",
+ &header_len);
+ of_node_put(rtas);
+ }
+
+ print_dump_header(dump_header);
+ dump_area_length = init_dump_header(&phdr);
+ /* align down */
+ dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
+
+ if (dump_header == NULL) {
+ register_dump_area(&phdr, dump_area_start);
+ return 0;
+ }
+
+ /* re-register the dump area, if old dump was invalid */
+ if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
+ invalidate_last_dump(&phdr, dump_area_start);
+ register_dump_area(&phdr, dump_area_start);
+ return 0;
+ }
+
+ if (dump_header) {
+ phyp_dump_info->reserved_scratch_addr =
+ dump_header->cpu_data.destination_address;
+ phyp_dump_info->reserved_scratch_size =
+ dump_header->cpu_data.source_length +
+ dump_header->hpte_data.source_length +
+ dump_header->kernel_data.source_length;
+ }
+
+ /* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+ rc = sysfs_create_file(kernel_kobj, &rr.attr);
+ if (rc)
+ printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n",
+ rc);
+
+ /* ToDo: re-register the dump area, for next time. */
+ return 0;
+}
+machine_subsys_initcall(pseries, phyp_dump_setup);
+
+int __init early_init_dt_scan_phyp_dump(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ const unsigned int *sizes;
+
+ phyp_dump_info->phyp_dump_configured = 0;
+ phyp_dump_info->phyp_dump_is_active = 0;
+
+ if (depth != 1 || strcmp(uname, "rtas") != 0)
+ return 0;
+
+ if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
+ phyp_dump_info->phyp_dump_configured++;
+
+ if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
+ phyp_dump_info->phyp_dump_is_active++;
+
+ sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
+ NULL);
+ if (!sizes)
+ return 0;
+
+ if (sizes[0] == 1)
+ phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
+
+ if (sizes[3] == 2)
+ phyp_dump_info->hpte_region_size =
+ *((unsigned long *)&sizes[4]);
+ return 1;
+}
+
+/* Look for phyp_dump= cmdline option */
+static int __init early_phyp_dump_enabled(char *p)
+{
+ phyp_dump_info->phyp_dump_at_boot = 1;
+
+ if (!p)
+ return 0;
+
+ if (strncmp(p, "1", 1) == 0)
+ phyp_dump_info->phyp_dump_at_boot = 1;
+ else if (strncmp(p, "0", 1) == 0)
+ phyp_dump_info->phyp_dump_at_boot = 0;
+
+ return 0;
+}
+early_param("phyp_dump", early_phyp_dump_enabled);
+
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 2800fce..ac75c10 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -222,14 +222,14 @@
tmp = strchr(buf, ' ');
if (!tmp) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
*tmp = '\0';
if (++tmp >= end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
@@ -238,12 +238,12 @@
*length = simple_strtoul(tmp, &tmp, 10);
if (*length == -1) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
if (*tmp != ' ' || ++tmp >= end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
@@ -252,12 +252,12 @@
tmp += *length;
if (tmp > end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
tmp++;
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 8e1ef16..e5b0ea8 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -195,31 +195,30 @@
static int __init scanlog_init(void)
{
struct proc_dir_entry *ent;
+ void *data;
+ int err = -ENOMEM;
ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
- if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_ERR "scan-log-dump not implemented on this system\n");
- return -EIO;
- }
+ if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE)
+ return -ENODEV;
- ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL);
- if (ent) {
- ent->proc_fops = &scanlog_fops;
- /* Ideally we could allocate a buffer < 4G */
- ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
- if (!ent->data) {
- printk(KERN_ERR "Failed to allocate a buffer\n");
- remove_proc_entry("scan-log-dump", ent->parent);
- return -ENOMEM;
- }
- ((unsigned int *)ent->data)[0] = 0;
- } else {
- printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
- return -EIO;
- }
+ /* Ideally we could allocate a buffer < 4G */
+ data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+ if (!data)
+ goto err;
+
+ ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+ &scanlog_fops);
+ if (!ent)
+ goto err;
+
+ ent->data = data;
proc_ppc64_scan_log_dump = ent;
return 0;
+err:
+ kfree(data);
+ return err;
}
static void __exit scanlog_cleanup(void)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index fdb9b1c..90555a3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -393,6 +393,7 @@
{
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
+ unsigned long in_purr, out_purr;
/*
* Indicate to the HV that we are idle. Now would be
@@ -400,6 +401,7 @@
*/
get_lppaca()->idle = 1;
get_lppaca()->donate_dedicated_cpu = 1;
+ in_purr = mfspr(SPRN_PURR);
/*
* We come in with interrupts disabled, and need_resched()
@@ -432,6 +434,8 @@
out:
HMT_medium();
+ out_purr = mfspr(SPRN_PURR);
+ get_lppaca()->wait_state_cycles += out_purr - in_purr;
get_lppaca()->donate_dedicated_cpu = 0;
get_lppaca()->idle = 0;
}
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 15f3e85..851a0be 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -27,6 +27,7 @@
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
+obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index df8bd2b..3eceeb5 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -257,7 +257,7 @@
if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index dd066bb..fa70ee3 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -99,7 +99,7 @@
if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index e0e24b0..005c2ec 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -37,6 +37,7 @@
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
@@ -44,7 +45,6 @@
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
-#include <asm/lmb.h>
#include <asm/ppc-pci.h>
#include "dart.h"
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 6ffdda2..6131fd2 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -175,13 +175,16 @@
switch(type) {
#ifdef CONFIG_PPC_DCR
case mpic_access_dcr:
- return dcr_write(rb->dhost, reg, value);
+ dcr_write(rb->dhost, reg, value);
+ break;
#endif
case mpic_access_mmio_be:
- return out_be32(rb->base + (reg >> 2), value);
+ out_be32(rb->base + (reg >> 2), value);
+ break;
case mpic_access_mmio_le:
default:
- return out_le32(rb->base + (reg >> 2), value);
+ out_le32(rb->base + (reg >> 2), value);
+ break;
}
}
@@ -1000,7 +1003,7 @@
const char *name)
{
struct mpic *mpic;
- u32 reg;
+ u32 greg_feature;
const char *vers;
int i;
int intvec_top;
@@ -1064,7 +1067,8 @@
/* Look for protected sources */
if (node) {
- unsigned int psize, bits, mapsize;
+ int psize;
+ unsigned int bits, mapsize;
const u32 *psrc =
of_get_property(node, "protected-sources", &psize);
if (psrc) {
@@ -1107,8 +1111,7 @@
* in, try to obtain one
*/
if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
- const u32 *reg;
- reg = of_get_property(node, "reg", NULL);
+ const u32 *reg = of_get_property(node, "reg", NULL);
BUG_ON(reg == NULL);
paddr = of_translate_address(node, reg);
BUG_ON(paddr == OF_BAD_ADDR);
@@ -1137,12 +1140,13 @@
* MPICs, num sources as well. On ISU MPICs, sources are counted
* as ISUs are added
*/
- reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
- mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+ greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+ mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
>> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
if (isu_size == 0)
- mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
- >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+ mpic->num_sources =
+ ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+ >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
@@ -1161,7 +1165,7 @@
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
/* Display version */
- switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
+ switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
vers = "1.0";
break;
@@ -1321,7 +1325,7 @@
void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
{
- int is_ipi;
+ unsigned int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
@@ -1344,7 +1348,7 @@
unsigned int mpic_irq_get_priority(unsigned int irq)
{
- int is_ipi;
+ unsigned int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 5abfcd1..1814adb 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -527,6 +527,7 @@
*
* ibm,plb-pciex-440spe
* ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
*
* Anything else will be rejected for now as they are all subtly
* different unfortunately.
@@ -645,7 +646,7 @@
int time_out = 20;
/* Set PLL clock receiver to LVPECL */
- mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
/* Shouldn't we do all the calibration stuff etc... here ? */
if (ppc440spe_pciex_check_reset(np))
@@ -659,8 +660,7 @@
}
/* De-assert reset of PCIe PLL, wait for lock */
- mtdcri(SDR0, PESDR0_PLLLCT1,
- mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
udelay(3);
while (time_out) {
@@ -712,9 +712,8 @@
mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
0x35000000);
}
- val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (1 << 24) | (1 << 16), 1 << 12);
return 0;
}
@@ -775,6 +774,115 @@
.setup_utl = ppc440speB_pciex_init_utl,
};
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+ u32 utlset1;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+ switch (port->index) {
+ case 0:
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ /* XXX FIXME add timeout */
+ switch (port->index) {
+ case 0:
+ while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return 0;
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x0800000c);
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+ .core_init = ppc460ex_pciex_core_init,
+ .port_init_hw = ppc460ex_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+};
+
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
@@ -830,17 +938,9 @@
* PCIe boards don't show this problem.
* This has to be re-tested and fixed in a later release!
*/
-#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
- * configured as done previously by U-Boot. Then Linux will currently
- * not reassign them. So the PHY reset is now done always. This will
- * lead to problems with the Atheros PCIe board again.
- */
val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
if (!(val & 0x00001000))
ppc405ex_pcie_phy_reset(port);
-#else
- ppc405ex_pcie_phy_reset(port);
-#endif
dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
@@ -896,6 +996,8 @@
else
ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
}
+ if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+ ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
@@ -1042,8 +1144,7 @@
port->link = 0;
}
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
msleep(100);
return 0;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 1c07908..d04e40b 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -271,6 +271,59 @@
#define PESDR1_405EX_PHYSTA 0x044C
/*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST 0x0308
+#define PESDR0_460EX_L0BISTSTS 0x0309
+#define PESDR0_460EX_L0CDRCTL 0x030A
+#define PESDR0_460EX_L0DRV 0x030B
+#define PESDR0_460EX_L0REC 0x030C
+#define PESDR0_460EX_L0LPB 0x030D
+#define PESDR0_460EX_L0CLK 0x030E
+#define PESDR0_460EX_PHY_CTL_RST 0x030F
+#define PESDR0_460EX_RSTSTA 0x0310
+#define PESDR0_460EX_OBS 0x0311
+#define PESDR0_460EX_L0ERRC 0x0320
+
+#define PESDR1_460EX_L0BIST 0x0348
+#define PESDR1_460EX_L1BIST 0x0349
+#define PESDR1_460EX_L2BIST 0x034A
+#define PESDR1_460EX_L3BIST 0x034B
+#define PESDR1_460EX_L0BISTSTS 0x034C
+#define PESDR1_460EX_L1BISTSTS 0x034D
+#define PESDR1_460EX_L2BISTSTS 0x034E
+#define PESDR1_460EX_L3BISTSTS 0x034F
+#define PESDR1_460EX_L0CDRCTL 0x0350
+#define PESDR1_460EX_L1CDRCTL 0x0351
+#define PESDR1_460EX_L2CDRCTL 0x0352
+#define PESDR1_460EX_L3CDRCTL 0x0353
+#define PESDR1_460EX_L0DRV 0x0354
+#define PESDR1_460EX_L1DRV 0x0355
+#define PESDR1_460EX_L2DRV 0x0356
+#define PESDR1_460EX_L3DRV 0x0357
+#define PESDR1_460EX_L0REC 0x0358
+#define PESDR1_460EX_L1REC 0x0359
+#define PESDR1_460EX_L2REC 0x035A
+#define PESDR1_460EX_L3REC 0x035B
+#define PESDR1_460EX_L0LPB 0x035C
+#define PESDR1_460EX_L1LPB 0x035D
+#define PESDR1_460EX_L2LPB 0x035E
+#define PESDR1_460EX_L3LPB 0x035F
+#define PESDR1_460EX_L0CLK 0x0360
+#define PESDR1_460EX_L1CLK 0x0361
+#define PESDR1_460EX_L2CLK 0x0362
+#define PESDR1_460EX_L3CLK 0x0363
+#define PESDR1_460EX_PHY_CTL_RST 0x0364
+#define PESDR1_460EX_RSTSTA 0x0365
+#define PESDR1_460EX_OBS 0x0366
+#define PESDR1_460EX_L0ERRC 0x0368
+#define PESDR1_460EX_L1ERRC 0x0369
+#define PESDR1_460EX_L2ERRC 0x036A
+#define PESDR1_460EX_L3ERRC 0x036B
+#define PESDR0_460EX_IHS1 0x036C
+#define PESDR0_460EX_IHS2 0x036D
+
+/*
* Of the above, some are common offsets from the base
*/
#define PESDRn_UTLSET1 0x00
@@ -353,6 +406,12 @@
#define PECFG_POM2LAL 0x390
#define PECFG_POM2LAH 0x394
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
enum
{
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
new file mode 100644
index 0000000..5b32adc
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -0,0 +1,200 @@
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003 - 2006 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+ u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+ if (sr & L2C_SR_CPE) {
+ /* Read cache trapped address */
+ u32 addr = l2c_diag(0x42000000);
+ printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+ if (sr & L2C_SR_TPE) {
+ /* Read tag trapped address */
+ u32 addr = l2c_diag(0x82000000) >> 16;
+ printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+
+ /* Clear parity errors */
+ if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+ } else {
+ printk(KERN_EMERG "L2C: LRU error\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+ struct device_node *np;
+ u32 r;
+ unsigned long flags;
+ int irq;
+ const u32 *dcrreg;
+ u32 dcrbase_isram;
+ int len;
+ const u32 *prop;
+ u32 l2_size;
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+ if (!np)
+ return 0;
+
+ /* Get l2 cache size */
+ prop = of_get_property(np, "cache-size", NULL);
+ if (prop == NULL) {
+ printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ l2_size = prop[0];
+
+ /* Map DCRs */
+ dcrreg = of_get_property(np, "dcr-reg", &len);
+ if (!dcrreg || (len != 4 * sizeof(u32))) {
+ printk(KERN_ERR "%s: Can't get DCR register base !",
+ np->full_name);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ dcrbase_isram = dcrreg[0];
+ dcrbase_l2c = dcrreg[2];
+
+ /* Get and map irq number from device tree */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "irq_of_parse_and_map failed\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ /* Install error handler */
+ if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+ printk(KERN_ERR "Cannot install L2C error handler"
+ ", cache is not enabled\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ local_irq_save(flags);
+ asm volatile ("sync" ::: "memory");
+
+ /* Disable SRAM */
+ mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+ /* Enable L2_MODE without ICU/DCU */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+ ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+ r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+ /* Hardware Clear Command */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ /* Clear Cache Parity and Tag Errors */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+ /* Enable 64G snoop region starting at 0 */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+ asm volatile ("sync" ::: "memory");
+
+ /* Enable ICU/DCU ports */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+ r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+ | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+ r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+ | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+ /* Check for 460EX/GT special handling */
+ if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+ r |= L2C_CFG_RDBW;
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ asm volatile ("sync; isync" ::: "memory");
+ local_irq_restore(flags);
+
+ printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+ of_node_put(np);
+ return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * At present, this routine just applies a system reset.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+ while (1)
+ ; /* Just in case the reset doesn't work */
+}
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e53ea4d..736c1fc 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -200,7 +200,7 @@
{
unsigned int i;
- printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
+ printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
for (i = 0; i < num_par_io_ports; i++) {
printk(KERN_INFO " cpodr[%u]=%08x\n", i,
in_be32(&par_io[i].cpodr));
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3223acb..bcf88e6 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -148,57 +148,57 @@
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is too small\n", __func__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
@@ -207,7 +207,7 @@
/* Set the PHY base address */
uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
return -ENOMEM;
}
@@ -230,7 +230,7 @@
/* Set UCC to fast type */
ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
ucc_fast_free(uccf);
return ret;
}
@@ -270,7 +270,7 @@
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
- __FUNCTION__);
+ __func__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -283,7 +283,7 @@
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
- __FUNCTION__);
+ __func__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -314,7 +314,7 @@
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
- __FUNCTION__);
+ __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
@@ -323,7 +323,7 @@
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
- __FUNCTION__);
+ __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index b2870b2..a578bc7 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -142,7 +142,7 @@
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
@@ -161,7 +161,7 @@
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
@@ -170,7 +170,7 @@
/* Set the PHY base address */
uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
if (uccs->us_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
return -ENOMEM;
}
@@ -189,7 +189,7 @@
uccs->us_pram_offset =
qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
if (IS_ERR_VALUE(uccs->us_pram_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
ucc_slow_free(uccs);
return -ENOMEM;
}
@@ -202,7 +202,7 @@
/* Set UCC to slow type */
ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot set UCC type", __func__);
ucc_slow_free(uccs);
return ret;
}
@@ -216,7 +216,7 @@
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->rx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
us_info->rx_bd_ring_len);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
@@ -227,7 +227,7 @@
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->tx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
@@ -317,7 +317,7 @@
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
- __FUNCTION__);
+ __func__);
ucc_slow_free(uccs);
return -EINVAL;
}
@@ -325,7 +325,7 @@
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
- __FUNCTION__);
+ __func__);
ucc_slow_free(uccs);
return -EINVAL;
}
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index be2808a..d4d15aa 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -84,7 +84,7 @@
ret = of_address_to_resource(np, 0, &r[0]);
DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
- __FUNCTION__,r[0].name, r[0].start, r[0].end);
+ __func__,r[0].name, r[0].start, r[0].end);
if (ret)
goto err;
@@ -93,7 +93,7 @@
r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
- __FUNCTION__,r[1].name, r[1].start, r[1].end);
+ __func__,r[1].name, r[1].start, r[1].end);
tsi_eth_dev =
platform_device_register_simple("tsi-ethernet", i++, &r[0],
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 31d3d33..ac1a72d 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -207,7 +207,7 @@
/* PCI Config mapping */
tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
tsi108_pci_cfg_phys = cfg_phys;
- DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+ DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
tsi108_pci_cfg_base);
/* Fetch host bridge registers address */
@@ -395,7 +395,7 @@
static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{ unsigned int irq;
- DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+ DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
if ((virq >= 1) && (virq <= 4)){
irq = virq + IRQ_PCI_INTAD_BASE - 1;
get_irq_desc(irq)->status |= IRQ_LEVEL;
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 9d656de..752443d 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -43,7 +43,7 @@
({ \
u32 offset = offsetof(immap_t, member); \
void *addr = ioremap (IMAP_ADDR + offset, \
- sizeof( ((immap_t*)0)->member)); \
+ FIELD_SIZEOF(immap_t, member)); \
addr; \
})
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index 11b0aa6..1d4b49a 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -520,7 +520,7 @@
#ifdef CONFIG_USE_MDIO
fec_enet_mii(dev);
#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
#endif /* CONFIG_USE_MDIO */
}
@@ -1441,7 +1441,7 @@
fecp->fec_ecntrl = ecntrl; /* restore old settings */
}
#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
#endif /* CONFIG_USE_MDIO */
#ifndef CONFIG_RPXCLASSIC
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 1b0ec72..e7e642b 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -701,23 +701,6 @@
b fast_exception_return
/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
-/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
* and save the AltiVec registers in its thread_struct.
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 7444df3..1a63711 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -109,7 +109,6 @@
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
i = max_mapnr;
while (i-- > 0) {
total++;
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 44d4398..fc928a2 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -512,7 +512,7 @@
{
int irq;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
i8259_init(0, 0);
mv64360_init_irq();
@@ -569,7 +569,7 @@
};
const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
- pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __FUNCTION__,
+ pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
return PCI_IRQ_TABLE_LOOKUP;
@@ -1300,7 +1300,7 @@
u32 data;
u8 data8;
- pr_debug("%s: enter\n", __FUNCTION__);
+ pr_debug("%s: enter\n", __func__);
/* Wait for debugger? */
if (ppc7d_wait_debugger) {
@@ -1333,7 +1333,7 @@
ppc_md.set_rtc_time = ppc7d_set_rtc_time;
ppc_md.get_rtc_time = ppc7d_get_rtc_time;
- pr_debug("%s: exit\n", __FUNCTION__);
+ pr_debug("%s: exit\n", __func__);
}
/* Called from machine_init(), early, before any of the __init functions
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 9f504fc..ab0cf4ce 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -279,7 +279,7 @@
int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
struct mpc52xx_cdm __iomem *cdm;
unsigned long flags;
u16 mclken_div;
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 463d1be..2667a9d 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -16,6 +16,7 @@
bool
default y
select HAVE_IDE
+ select HAVE_LMB
help
SPARC is a family of RISC microprocessors designed and marketed by
Sun Microsystems, incorporated. This port covers the newer 64-bit
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 41ca721..ebfe038 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -69,7 +69,7 @@
enum {
PARTITION_SHIFT = 3,
MAX_DISKNO = HVMAXARCHITECTEDVIRTUALDISKS,
- MAX_DISK_NAME = sizeof(((struct gendisk *)0)->disk_name)
+ MAX_DISK_NAME = FIELD_SIZEOF(struct gendisk, disk_name)
};
static DEFINE_SPINLOCK(viodasd_spinlock);
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index f577dae..aa7f796 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -74,7 +74,7 @@
/**
* buffer_icap_get_status - Get the contents of the status register.
- * @base_address: is the base address of the device
+ * @drvdata: a pointer to the drvdata.
*
* The status register contains the ICAP status and the done bit.
*
@@ -88,9 +88,9 @@
* D1 - Always 1
* D0 - Done bit
**/
-static inline u32 buffer_icap_get_status(void __iomem *base_address)
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata)
{
- return in_be32(base_address + XHI_STATUS_REG_OFFSET);
+ return in_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET);
}
/**
@@ -117,20 +117,8 @@
**/
static inline bool buffer_icap_busy(void __iomem *base_address)
{
- return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
-}
-
-/**
- * buffer_icap_busy - Return true if the icap device is not busy
- * @base_address: is the base address of the device
- *
- * The queries the low order bit of the status register, which
- * indicates whether the current configuration or readback operation
- * has completed.
- **/
-static inline bool buffer_icap_done(void __iomem *base_address)
-{
- return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
+ u32 status = in_be32(base_address + XHI_STATUS_REG_OFFSET);
+ return (status & 1) == XHI_NOT_FINISHED;
}
/**
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 0318495..c5b1840 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -44,8 +44,6 @@
#include <asm/io.h>
#include "xilinx_hwicap.h"
-void buffer_icap_reset(struct hwicap_drvdata *drvdata);
-
/* Loads a partial bitstream from system memory. */
int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 Size);
@@ -54,4 +52,7 @@
int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 Size);
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata);
+void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+
#endif
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 6f45dbd..776b505 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -78,13 +78,6 @@
#define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
#define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
-/* Status Register (SR) */
-#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
-#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
-#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
-#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
-#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
-
#define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
#define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
@@ -152,13 +145,35 @@
}
/**
+ * fifo_icap_get_status - Get the contents of the status register.
+ * @drvdata: a pointer to the drvdata.
+ *
+ * The status register contains the ICAP status and the done bit.
+ *
+ * D8 - cfgerr
+ * D7 - dalign
+ * D6 - rip
+ * D5 - in_abort_l
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - Done bit
+ **/
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata)
+{
+ u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+ dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+ return status;
+}
+
+/**
* fifo_icap_busy - Return true if the ICAP is still processing a transaction.
* @drvdata: a pointer to the drvdata.
**/
static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
{
u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
- dev_dbg(drvdata->dev, "Getting status = %x\n", status);
return (status & XHI_SR_DONE_MASK) ? 0 : 1;
}
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 4d3068d..ffabd3b 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -56,6 +56,7 @@
u32 *FrameBuffer,
u32 NumWords);
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata);
void fifo_icap_reset(struct hwicap_drvdata *drvdata);
void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 2284fa2..016f905 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -36,7 +36,7 @@
*****************************************************************************/
/*
- * This is the code behind /dev/xilinx_icap -- it allows a user-space
+ * This is the code behind /dev/icap* -- it allows a user-space
* application to use the Xilinx ICAP subsystem.
*
* The following operations are possible:
@@ -67,7 +67,7 @@
* user-space application code that uses this device. The simplest
* way to use this interface is simply:
*
- * cp foo.bit /dev/xilinx_icap
+ * cp foo.bit /dev/icap0
*
* Note that unless foo.bit is an appropriately constructed partial
* bitstream, this has a high likelyhood of overwriting the design
@@ -105,18 +105,14 @@
#include "buffer_icap.h"
#include "fifo_icap.h"
-#define DRIVER_NAME "xilinx_icap"
+#define DRIVER_NAME "icap"
#define HWICAP_REGS (0x10000)
-/* dynamically allocate device number */
-static int xhwicap_major;
-static int xhwicap_minor;
+#define XHWICAP_MAJOR 259
+#define XHWICAP_MINOR 0
#define HWICAP_DEVICES 1
-module_param(xhwicap_major, int, S_IRUGO);
-module_param(xhwicap_minor, int, S_IRUGO);
-
/* An array, which is set to true when the device is registered. */
static bool probed_devices[HWICAP_DEVICES];
static struct mutex icap_sem;
@@ -250,8 +246,26 @@
* Create the data to be written to the ICAP.
*/
buffer[index++] = XHI_DUMMY_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
buffer[index++] = XHI_SYNC_PACKET;
buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+
+ /*
+ * Write the data to the FIFO and initiate the transfer of data present
+ * in the FIFO to the ICAP device.
+ */
+ status = drvdata->config->set_configuration(drvdata,
+ &buffer[0], index);
+ if (status)
+ return status;
+
+ /* If the syncword was not found, then we need to start over. */
+ status = drvdata->config->get_status(drvdata);
+ if ((status & XHI_SR_DALIGN_MASK) != XHI_SR_DALIGN_MASK)
+ return -EIO;
+
+ index = 0;
buffer[index++] = hwicap_type_1_read(reg) | 1;
buffer[index++] = XHI_NOOP_PACKET;
buffer[index++] = XHI_NOOP_PACKET;
@@ -587,7 +601,7 @@
probed_devices[id] = 1;
mutex_unlock(&icap_sem);
- devt = MKDEV(xhwicap_major, xhwicap_minor + id);
+ devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id);
drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
if (!drvdata) {
@@ -664,12 +678,14 @@
static struct hwicap_driver_config buffer_icap_config = {
.get_configuration = buffer_icap_get_configuration,
.set_configuration = buffer_icap_set_configuration,
+ .get_status = buffer_icap_get_status,
.reset = buffer_icap_reset,
};
static struct hwicap_driver_config fifo_icap_config = {
.get_configuration = fifo_icap_get_configuration,
.set_configuration = fifo_icap_set_configuration,
+ .get_status = fifo_icap_get_status,
.reset = fifo_icap_reset,
};
@@ -690,7 +706,7 @@
dev_set_drvdata(dev, NULL);
mutex_lock(&icap_sem);
- probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+ probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
mutex_unlock(&icap_sem);
return 0; /* success */
}
@@ -830,23 +846,12 @@
icap_class = class_create(THIS_MODULE, "xilinx_config");
mutex_init(&icap_sem);
- if (xhwicap_major) {
- devt = MKDEV(xhwicap_major, xhwicap_minor);
- retval = register_chrdev_region(
- devt,
- HWICAP_DEVICES,
- DRIVER_NAME);
- if (retval < 0)
- return retval;
- } else {
- retval = alloc_chrdev_region(&devt,
- xhwicap_minor,
- HWICAP_DEVICES,
- DRIVER_NAME);
- if (retval < 0)
- return retval;
- xhwicap_major = MAJOR(devt);
- }
+ devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
+ retval = register_chrdev_region(devt,
+ HWICAP_DEVICES,
+ DRIVER_NAME);
+ if (retval < 0)
+ return retval;
retval = platform_driver_register(&hwicap_platform_driver);
@@ -871,7 +876,7 @@
static void __exit hwicap_module_cleanup(void)
{
- dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
+ dev_t devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
class_destroy(icap_class);
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 405fee7..1f9c8b0 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -65,10 +65,27 @@
};
struct hwicap_driver_config {
+ /* Read configuration data given by size into the data buffer.
+ Return 0 if successful. */
int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
+ /* Write configuration data given by size from the data buffer.
+ Return 0 if successful. */
int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
+ /* Get the status register, bit pattern given by:
+ * D8 - 0 = configuration error
+ * D7 - 1 = alignment found
+ * D6 - 1 = readback in progress
+ * D5 - 0 = abort in progress
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - 1 = operation completed
+ */
+ u32 (*get_status)(struct hwicap_drvdata *drvdata);
+ /* Reset the hw */
void (*reset)(struct hwicap_drvdata *drvdata);
};
@@ -163,6 +180,13 @@
/* Constant to use for CRC check when CRC has been disabled */
#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL
+/* Meanings of the bits returned by get_status */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
+
/**
* hwicap_type_1_read - Generates a Type 1 read packet header.
* @reg: is the address of the register to be read back.
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3b1ea32..4b44273 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -218,7 +218,8 @@
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
+pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 2e39e028..c50f0f4 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -55,15 +55,10 @@
* - Multiqueue RX/TX
*/
-
-/* Must be a power of two */
-#define RX_RING_SIZE 2048
-#define TX_RING_SIZE 4096
-
#define LRO_MAX_AGGR 64
#define PE_MIN_MTU 64
-#define PE_MAX_MTU 1500
+#define PE_MAX_MTU 9000
#define PE_DEF_MTU ETH_DATA_LEN
#define DEFAULT_MSG_ENABLE \
@@ -76,16 +71,6 @@
NETIF_MSG_RX_ERR | \
NETIF_MSG_TX_ERR)
-#define TX_DESC(tx, num) ((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
-#define TX_DESC_INFO(tx, num) ((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
-#define RX_DESC(rx, num) ((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
-#define RX_DESC_INFO(rx, num) ((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
-#define RX_BUFF(rx, num) ((rx)->buffers[(num) & (RX_RING_SIZE-1)])
-
-#define RING_USED(ring) (((ring)->next_to_fill - (ring)->next_to_clean) \
- & ((ring)->size - 1))
-#define RING_AVAIL(ring) ((ring->size) - RING_USED(ring))
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
@@ -94,6 +79,8 @@
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
+extern const struct ethtool_ops pasemi_mac_ethtool_ops;
+
static int translation_enabled(void)
{
#if defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
@@ -322,6 +309,103 @@
return (nfrags + 3) & ~1;
}
+static struct pasemi_mac_csring *pasemi_mac_setup_csring(struct pasemi_mac *mac)
+{
+ struct pasemi_mac_csring *ring;
+ u32 val;
+ unsigned int cfg;
+ int chno;
+
+ ring = pasemi_dma_alloc_chan(TXCHAN, sizeof(struct pasemi_mac_csring),
+ offsetof(struct pasemi_mac_csring, chan));
+
+ if (!ring) {
+ dev_err(&mac->pdev->dev, "Can't allocate checksum channel\n");
+ goto out_chan;
+ }
+
+ chno = ring->chan.chno;
+
+ ring->size = CS_RING_SIZE;
+ ring->next_to_fill = 0;
+
+ /* Allocate descriptors */
+ if (pasemi_dma_alloc_ring(&ring->chan, CS_RING_SIZE))
+ goto out_ring_desc;
+
+ write_dma_reg(PAS_DMA_TXCHAN_BASEL(chno),
+ PAS_DMA_TXCHAN_BASEL_BRBL(ring->chan.ring_dma));
+ val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->chan.ring_dma >> 32);
+ val |= PAS_DMA_TXCHAN_BASEU_SIZ(CS_RING_SIZE >> 3);
+
+ write_dma_reg(PAS_DMA_TXCHAN_BASEU(chno), val);
+
+ ring->events[0] = pasemi_dma_alloc_flag();
+ ring->events[1] = pasemi_dma_alloc_flag();
+ if (ring->events[0] < 0 || ring->events[1] < 0)
+ goto out_flags;
+
+ pasemi_dma_clear_flag(ring->events[0]);
+ pasemi_dma_clear_flag(ring->events[1]);
+
+ ring->fun = pasemi_dma_alloc_fun();
+ if (ring->fun < 0)
+ goto out_fun;
+
+ cfg = PAS_DMA_TXCHAN_CFG_TY_FUNC | PAS_DMA_TXCHAN_CFG_UP |
+ PAS_DMA_TXCHAN_CFG_TATTR(ring->fun) |
+ PAS_DMA_TXCHAN_CFG_LPSQ | PAS_DMA_TXCHAN_CFG_LPDQ;
+
+ if (translation_enabled())
+ cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
+
+ write_dma_reg(PAS_DMA_TXCHAN_CFG(chno), cfg);
+
+ /* enable channel */
+ pasemi_dma_start_chan(&ring->chan, PAS_DMA_TXCHAN_TCMDSTA_SZ |
+ PAS_DMA_TXCHAN_TCMDSTA_DB |
+ PAS_DMA_TXCHAN_TCMDSTA_DE |
+ PAS_DMA_TXCHAN_TCMDSTA_DA);
+
+ return ring;
+
+out_fun:
+out_flags:
+ if (ring->events[0] >= 0)
+ pasemi_dma_free_flag(ring->events[0]);
+ if (ring->events[1] >= 0)
+ pasemi_dma_free_flag(ring->events[1]);
+ pasemi_dma_free_ring(&ring->chan);
+out_ring_desc:
+ pasemi_dma_free_chan(&ring->chan);
+out_chan:
+
+ return NULL;
+}
+
+static void pasemi_mac_setup_csrings(struct pasemi_mac *mac)
+{
+ int i;
+ mac->cs[0] = pasemi_mac_setup_csring(mac);
+ if (mac->type == MAC_TYPE_XAUI)
+ mac->cs[1] = pasemi_mac_setup_csring(mac);
+ else
+ mac->cs[1] = 0;
+
+ for (i = 0; i < MAX_CS; i++)
+ if (mac->cs[i])
+ mac->num_cs++;
+}
+
+static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring)
+{
+ pasemi_dma_stop_chan(&csring->chan);
+ pasemi_dma_free_flag(csring->events[0]);
+ pasemi_dma_free_flag(csring->events[1]);
+ pasemi_dma_free_ring(&csring->chan);
+ pasemi_dma_free_chan(&csring->chan);
+}
+
static int pasemi_mac_setup_rx_resources(const struct net_device *dev)
{
struct pasemi_mac_rxring *ring;
@@ -445,7 +529,7 @@
cfg = PAS_DMA_TXCHAN_CFG_TY_IFACE |
PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
PAS_DMA_TXCHAN_CFG_UP |
- PAS_DMA_TXCHAN_CFG_WT(2);
+ PAS_DMA_TXCHAN_CFG_WT(4);
if (translation_enabled())
cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
@@ -810,13 +894,21 @@
u64 mactx = TX_DESC(txring, i);
struct sk_buff *skb;
- skb = TX_DESC_INFO(txring, i+1).skb;
- nr_frags = TX_DESC_INFO(txring, i).dma;
-
if ((mactx & XCT_MACTX_E) ||
(*chan->status & PAS_STATUS_ERROR))
pasemi_mac_tx_error(mac, mactx);
+ /* Skip over control descriptors */
+ if (!(mactx & XCT_MACTX_LLEN_M)) {
+ TX_DESC(txring, i) = 0;
+ TX_DESC(txring, i+1) = 0;
+ buf_count = 2;
+ continue;
+ }
+
+ skb = TX_DESC_INFO(txring, i+1).skb;
+ nr_frags = TX_DESC_INFO(txring, i).dma;
+
if (unlikely(mactx & XCT_MACTX_O))
/* Not yet transmitted */
break;
@@ -1041,13 +1133,7 @@
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int flags;
- int ret;
-
- /* enable rx section */
- write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
-
- /* enable tx section */
- write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+ int i, ret;
flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
@@ -1064,6 +1150,16 @@
if (!mac->tx)
goto out_tx_ring;
+ if (dev->mtu > 1500) {
+ pasemi_mac_setup_csrings(mac);
+ if (!mac->num_cs)
+ goto out_tx_ring;
+ }
+
+ /* Zero out rmon counters */
+ for (i = 0; i < 32; i++)
+ write_mac_reg(mac, PAS_MAC_RMON(i), 0);
+
/* 0x3ff with 33MHz clock is about 31us */
write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
@@ -1247,7 +1343,7 @@
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int sta;
- int rxch, txch;
+ int rxch, txch, i;
rxch = rx_ring(mac)->chan.chno;
txch = tx_ring(mac)->chan.chno;
@@ -1292,6 +1388,9 @@
free_irq(mac->tx->chan.irq, mac->tx);
free_irq(mac->rx->chan.irq, mac->rx);
+ for (i = 0; i < mac->num_cs; i++)
+ pasemi_mac_free_csring(mac->cs[i]);
+
/* Free resources */
pasemi_mac_free_rx_resources(mac);
pasemi_mac_free_tx_resources(mac);
@@ -1299,36 +1398,114 @@
return 0;
}
+static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
+ const dma_addr_t *map,
+ const unsigned int *map_size,
+ struct pasemi_mac_txring *txring,
+ struct pasemi_mac_csring *csring)
+{
+ u64 fund;
+ dma_addr_t cs_dest;
+ const int nh_off = skb_network_offset(skb);
+ const int nh_len = skb_network_header_len(skb);
+ const int nfrags = skb_shinfo(skb)->nr_frags;
+ int cs_size, i, fill, hdr, cpyhdr, evt;
+ dma_addr_t csdma;
+
+ fund = XCT_FUN_ST | XCT_FUN_RR_8BRES |
+ XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+ XCT_FUN_CRM_SIG | XCT_FUN_LLEN(skb->len - nh_off) |
+ XCT_FUN_SHL(nh_len >> 2) | XCT_FUN_SE;
+
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ fund |= XCT_FUN_SIG_TCP4;
+ /* TCP checksum is 16 bytes into the header */
+ cs_dest = map[0] + skb_transport_offset(skb) + 16;
+ break;
+ case IPPROTO_UDP:
+ fund |= XCT_FUN_SIG_UDP4;
+ /* UDP checksum is 6 bytes into the header */
+ cs_dest = map[0] + skb_transport_offset(skb) + 6;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Do the checksum offloaded */
+ fill = csring->next_to_fill;
+ hdr = fill;
+
+ CS_DESC(csring, fill++) = fund;
+ /* Room for 8BRES. Checksum result is really 2 bytes into it */
+ csdma = csring->chan.ring_dma + (fill & (CS_RING_SIZE-1)) * 8 + 2;
+ CS_DESC(csring, fill++) = 0;
+
+ CS_DESC(csring, fill) = XCT_PTR_LEN(map_size[0]-nh_off) | XCT_PTR_ADDR(map[0]+nh_off);
+ for (i = 1; i <= nfrags; i++)
+ CS_DESC(csring, fill+i) = XCT_PTR_LEN(map_size[i]) | XCT_PTR_ADDR(map[i]);
+
+ fill += i;
+ if (fill & 1)
+ fill++;
+
+ /* Copy the result into the TCP packet */
+ cpyhdr = fill;
+ CS_DESC(csring, fill++) = XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+ XCT_FUN_LLEN(2) | XCT_FUN_SE;
+ CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(cs_dest) | XCT_PTR_T;
+ CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(csdma);
+ fill++;
+
+ evt = !csring->last_event;
+ csring->last_event = evt;
+
+ /* Event handshaking with MAC TX */
+ CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_SET | CTRL_CMD_REG(csring->events[evt]);
+ CS_DESC(csring, fill++) = 0;
+ CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_WCLR | CTRL_CMD_REG(csring->events[!evt]);
+ CS_DESC(csring, fill++) = 0;
+ csring->next_to_fill = fill & (CS_RING_SIZE-1);
+
+ cs_size = fill - hdr;
+ write_dma_reg(PAS_DMA_TXCHAN_INCR(csring->chan.chno), (cs_size) >> 1);
+
+ /* TX-side event handshaking */
+ fill = txring->next_to_fill;
+ TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_WSET | CTRL_CMD_REG(csring->events[evt]);
+ TX_DESC(txring, fill++) = 0;
+ TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_CLR | CTRL_CMD_REG(csring->events[!evt]);
+ TX_DESC(txring, fill++) = 0;
+ txring->next_to_fill = fill;
+
+ write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
+
+ return;
+}
+
static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
{
- struct pasemi_mac *mac = netdev_priv(dev);
- struct pasemi_mac_txring *txring;
- u64 dflags, mactx;
+ struct pasemi_mac * const mac = netdev_priv(dev);
+ struct pasemi_mac_txring * const txring = tx_ring(mac);
+ struct pasemi_mac_csring *csring;
+ u64 dflags = 0;
+ u64 mactx;
dma_addr_t map[MAX_SKB_FRAGS+1];
unsigned int map_size[MAX_SKB_FRAGS+1];
unsigned long flags;
int i, nfrags;
int fill;
+ const int nh_off = skb_network_offset(skb);
+ const int nh_len = skb_network_header_len(skb);
+
+ prefetch(&txring->ring_info);
dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const unsigned char *nh = skb_network_header(skb);
-
- switch (ip_hdr(skb)->protocol) {
- case IPPROTO_TCP:
- dflags |= XCT_MACTX_CSUM_TCP;
- dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
- dflags |= XCT_MACTX_IPO(nh - skb->data);
- break;
- case IPPROTO_UDP:
- dflags |= XCT_MACTX_CSUM_UDP;
- dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
- dflags |= XCT_MACTX_IPO(nh - skb->data);
- break;
- }
- }
-
nfrags = skb_shinfo(skb)->nr_frags;
map[0] = pci_map_single(mac->dma_pdev, skb->data, skb_headlen(skb),
@@ -1350,24 +1527,46 @@
}
}
+ if (skb->ip_summed == CHECKSUM_PARTIAL && skb->len <= 1540) {
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ dflags |= XCT_MACTX_CSUM_TCP;
+ dflags |= XCT_MACTX_IPH(nh_len >> 2);
+ dflags |= XCT_MACTX_IPO(nh_off);
+ break;
+ case IPPROTO_UDP:
+ dflags |= XCT_MACTX_CSUM_UDP;
+ dflags |= XCT_MACTX_IPH(nh_len >> 2);
+ dflags |= XCT_MACTX_IPO(nh_off);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ }
+
mactx = dflags | XCT_MACTX_LLEN(skb->len);
- txring = tx_ring(mac);
-
spin_lock_irqsave(&txring->lock, flags);
- fill = txring->next_to_fill;
-
/* Avoid stepping on the same cache line that the DMA controller
* is currently about to send, so leave at least 8 words available.
* Total free space needed is mactx + fragments + 8
*/
- if (RING_AVAIL(txring) < nfrags + 10) {
+ if (RING_AVAIL(txring) < nfrags + 14) {
/* no room -- stop the queue and wait for tx intr */
netif_stop_queue(dev);
goto out_err;
}
+ /* Queue up checksum + event descriptors, if needed */
+ if (mac->num_cs && skb->ip_summed == CHECKSUM_PARTIAL && skb->len > 1540) {
+ csring = mac->cs[mac->last_cs];
+ mac->last_cs = (mac->last_cs + 1) % mac->num_cs;
+
+ pasemi_mac_queue_csdesc(skb, map, map_size, txring, csring);
+ }
+
+ fill = txring->next_to_fill;
TX_DESC(txring, fill) = mactx;
TX_DESC_INFO(txring, fill).dma = nfrags;
fill++;
@@ -1445,8 +1644,9 @@
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- unsigned int rcmdsta;
+ unsigned int rcmdsta = 0;
int running;
+ int ret = 0;
if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
return -EINVAL;
@@ -1468,6 +1668,16 @@
pasemi_mac_pause_rxint(mac);
pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
pasemi_mac_free_rx_buffers(mac);
+
+ }
+
+ /* Setup checksum channels if large MTU and none already allocated */
+ if (new_mtu > 1500 && !mac->num_cs) {
+ pasemi_mac_setup_csrings(mac);
+ if (!mac->num_cs) {
+ ret = -ENOMEM;
+ goto out;
+ }
}
/* Change maxf, i.e. what size frames are accepted.
@@ -1482,6 +1692,7 @@
/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+out:
if (running) {
write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
@@ -1494,7 +1705,7 @@
pasemi_mac_intf_enable(mac);
}
- return 0;
+ return ret;
}
static int __devinit
@@ -1528,7 +1739,7 @@
netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG |
- NETIF_F_HIGHDMA;
+ NETIF_F_HIGHDMA | NETIF_F_GSO;
mac->lro_mgr.max_aggr = LRO_MAX_AGGR;
mac->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
@@ -1590,6 +1801,7 @@
mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
dev->change_mtu = pasemi_mac_change_mtu;
+ dev->ethtool_ops = &pasemi_mac_ethtool_ops;
if (err)
goto out;
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index 99e7b93..1a115ec 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -26,7 +26,14 @@
#include <linux/spinlock.h>
#include <linux/phy.h>
+/* Must be a power of two */
+#define RX_RING_SIZE 2048
+#define TX_RING_SIZE 4096
+#define CS_RING_SIZE (TX_RING_SIZE*2)
+
+
#define MAX_LRO_DESCRIPTORS 8
+#define MAX_CS 2
struct pasemi_mac_txring {
struct pasemi_dmachan chan; /* Must be first */
@@ -51,6 +58,15 @@
struct pasemi_mac *mac; /* Needed in intr handler */
};
+struct pasemi_mac_csring {
+ struct pasemi_dmachan chan;
+ unsigned int size;
+ unsigned int next_to_fill;
+ int events[2];
+ int last_event;
+ int fun;
+};
+
struct pasemi_mac {
struct net_device *netdev;
struct pci_dev *pdev;
@@ -60,10 +76,12 @@
struct napi_struct napi;
int bufsz; /* RX ring buffer size */
+ int last_cs;
+ int num_cs;
+ u32 dma_if;
u8 type;
#define MAC_TYPE_GMAC 1
#define MAC_TYPE_XAUI 2
- u32 dma_if;
u8 mac_addr[6];
@@ -74,6 +92,7 @@
struct pasemi_mac_txring *tx;
struct pasemi_mac_rxring *rx;
+ struct pasemi_mac_csring *cs[MAX_CS];
char tx_irq_name[10]; /* "eth%d tx" */
char rx_irq_name[10]; /* "eth%d rx" */
int link;
@@ -90,6 +109,16 @@
dma_addr_t dma;
};
+#define TX_DESC(tx, num) ((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
+#define TX_DESC_INFO(tx, num) ((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
+#define RX_DESC(rx, num) ((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
+#define RX_DESC_INFO(rx, num) ((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
+#define RX_BUFF(rx, num) ((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+#define CS_DESC(cs, num) ((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
+
+#define RING_USED(ring) (((ring)->next_to_fill - (ring)->next_to_clean) \
+ & ((ring)->size - 1))
+#define RING_AVAIL(ring) ((ring->size) - RING_USED(ring))
/* PCI register offsets and formats */
@@ -101,6 +130,7 @@
PAS_MAC_CFG_ADR0 = 0x8c,
PAS_MAC_CFG_ADR1 = 0x90,
PAS_MAC_CFG_TXP = 0x98,
+ PAS_MAC_CFG_RMON = 0x100,
PAS_MAC_IPC_CHNL = 0x208,
};
@@ -172,6 +202,8 @@
#define PAS_MAC_CFG_TXP_TIFG(x) (((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
PAS_MAC_CFG_TXP_TIFG_M)
+#define PAS_MAC_RMON(r) (0x100+(r)*4)
+
#define PAS_MAC_IPC_CHNL_DCHNO_M 0x003f0000
#define PAS_MAC_IPC_CHNL_DCHNO_S 16
#define PAS_MAC_IPC_CHNL_DCHNO(x) (((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
@@ -181,4 +213,5 @@
#define PAS_MAC_IPC_CHNL_BCH(x) (((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
PAS_MAC_IPC_CHNL_BCH_M)
+
#endif /* PASEMI_MAC_H */
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
new file mode 100644
index 0000000..5e8df3a
--- /dev/null
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Ethtool hooks for the PA Semi PWRficient onchip 1G/10G Ethernet MACs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/inet_lro.h>
+
+#include <asm/pasemi_dma.h>
+#include "pasemi_mac.h"
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "rx-drops" },
+ { "rx-bytes" },
+ { "rx-packets" },
+ { "rx-broadcast-packets" },
+ { "rx-multicast-packets" },
+ { "rx-crc-errors" },
+ { "rx-undersize-errors" },
+ { "rx-oversize-errors" },
+ { "rx-short-fragment-errors" },
+ { "rx-jabber-errors" },
+ { "rx-64-byte-packets" },
+ { "rx-65-127-byte-packets" },
+ { "rx-128-255-byte-packets" },
+ { "rx-256-511-byte-packets" },
+ { "rx-512-1023-byte-packets" },
+ { "rx-1024-1518-byte-packets" },
+ { "rx-pause-frames" },
+ { "tx-bytes" },
+ { "tx-packets" },
+ { "tx-broadcast-packets" },
+ { "tx-multicast-packets" },
+ { "tx-collisions" },
+ { "tx-late-collisions" },
+ { "tx-excessive-collisions" },
+ { "tx-crc-errors" },
+ { "tx-undersize-errors" },
+ { "tx-oversize-errors" },
+ { "tx-64-byte-packets" },
+ { "tx-65-127-byte-packets" },
+ { "tx-128-255-byte-packets" },
+ { "tx-256-511-byte-packets" },
+ { "tx-512-1023-byte-packets" },
+ { "tx-1024-1518-byte-packets" },
+};
+
+static int
+pasemi_mac_ethtool_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ struct phy_device *phydev = mac->phydev;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static void
+pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct pasemi_mac *mac;
+ mac = netdev_priv(netdev);
+
+ /* clear and fill out info */
+ memset(drvinfo, 0, sizeof(struct ethtool_drvinfo));
+ strncpy(drvinfo->driver, "pasemi_mac", 12);
+ strcpy(drvinfo->version, "N/A");
+ strcpy(drvinfo->fw_version, "N/A");
+ strncpy(drvinfo->bus_info, pci_name(mac->pdev), 32);
+}
+
+static u32
+pasemi_mac_ethtool_get_msglevel(struct net_device *netdev)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ return mac->msg_enable;
+}
+
+static void
+pasemi_mac_ethtool_set_msglevel(struct net_device *netdev,
+ u32 level)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ mac->msg_enable = level;
+}
+
+
+static void
+pasemi_mac_ethtool_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ering)
+{
+ struct pasemi_mac *mac = netdev->priv;
+
+ ering->tx_max_pending = TX_RING_SIZE/2;
+ ering->tx_pending = RING_USED(mac->tx)/2;
+ ering->rx_max_pending = RX_RING_SIZE/4;
+ ering->rx_pending = RING_USED(mac->rx)/4;
+}
+
+static int pasemi_mac_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(ethtool_stats_keys);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void pasemi_mac_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct pasemi_mac *mac = netdev->priv;
+ int i;
+
+ data[0] = pasemi_read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if))
+ >> PAS_DMA_RXINT_RCMDSTA_DROPS_S;
+ for (i = 0; i < 32; i++)
+ data[1+i] = pasemi_read_mac_reg(mac->dma_if, PAS_MAC_RMON(i));
+}
+
+static void pasemi_mac_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+const struct ethtool_ops pasemi_mac_ethtool_ops = {
+ .get_settings = pasemi_mac_ethtool_get_settings,
+ .get_drvinfo = pasemi_mac_ethtool_get_drvinfo,
+ .get_msglevel = pasemi_mac_ethtool_get_msglevel,
+ .set_msglevel = pasemi_mac_ethtool_set_msglevel,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = pasemi_mac_ethtool_get_ringparam,
+ .get_strings = pasemi_mac_get_strings,
+ .get_sset_count = pasemi_mac_get_sset_count,
+ .get_ethtool_stats = pasemi_mac_get_ethtool_stats,
+};
+
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 7eb6e7e..e365efb 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1266,6 +1266,85 @@
return 0;
}
+static void gelic_net_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ if (0 <= ps3_compare_firmware_version(2, 2, 0))
+ wol->supported = WAKE_MAGIC;
+ else
+ wol->supported = 0;
+
+ wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+static int gelic_net_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ int status;
+ struct gelic_card *card;
+ u64 v1, v2;
+
+ if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
+ !capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (wol->wolopts & ~WAKE_MAGIC)
+ return -EINVAL;
+
+ card = netdev_card(netdev);
+ if (wol->wolopts & WAKE_MAGIC) {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_MAGIC_PACKET,
+ 0, GELIC_LV1_WOL_MP_ENABLE,
+ &v1, &v2);
+ if (status) {
+ pr_info("%s: enabling WOL failed %d\n", __func__,
+ status);
+ status = -EIO;
+ goto done;
+ }
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_ADD_MATCH_ADDR,
+ 0, GELIC_LV1_WOL_MATCH_ALL,
+ &v1, &v2);
+ if (!status)
+ ps3_sys_manager_set_wol(1);
+ else {
+ pr_info("%s: enabling WOL filter failed %d\n",
+ __func__, status);
+ status = -EIO;
+ }
+ } else {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_MAGIC_PACKET,
+ 0, GELIC_LV1_WOL_MP_DISABLE,
+ &v1, &v2);
+ if (status) {
+ pr_info("%s: disabling WOL failed %d\n", __func__,
+ status);
+ status = -EIO;
+ goto done;
+ }
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_DELETE_MATCH_ADDR,
+ 0, GELIC_LV1_WOL_MATCH_ALL,
+ &v1, &v2);
+ if (!status)
+ ps3_sys_manager_set_wol(0);
+ else {
+ pr_info("%s: removing WOL filter failed %d\n",
+ __func__, status);
+ status = -EIO;
+ }
+ }
+done:
+ return status;
+}
+
static struct ethtool_ops gelic_ether_ethtool_ops = {
.get_drvinfo = gelic_net_get_drvinfo,
.get_settings = gelic_ether_get_settings,
@@ -1274,6 +1353,8 @@
.set_tx_csum = ethtool_op_set_tx_csum,
.get_rx_csum = gelic_net_get_rx_csum,
.set_rx_csum = gelic_net_set_rx_csum,
+ .get_wol = gelic_net_get_wol,
+ .set_wol = gelic_net_set_wol,
};
/**
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 1d39d06..520f143 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -182,12 +182,32 @@
GELIC_LV1_GET_ETH_PORT_STATUS = 2,
GELIC_LV1_SET_NEGOTIATION_MODE = 3,
GELIC_LV1_GET_VLAN_ID = 4,
+ GELIC_LV1_SET_WOL = 5,
GELIC_LV1_GET_CHANNEL = 6,
GELIC_LV1_POST_WLAN_CMD = 9,
GELIC_LV1_GET_WLAN_CMD_RESULT = 10,
GELIC_LV1_GET_WLAN_EVENT = 11
};
+/* for GELIC_LV1_SET_WOL */
+enum gelic_lv1_wol_command {
+ GELIC_LV1_WOL_MAGIC_PACKET = 1,
+ GELIC_LV1_WOL_ADD_MATCH_ADDR = 6,
+ GELIC_LV1_WOL_DELETE_MATCH_ADDR = 7,
+};
+
+/* for GELIC_LV1_WOL_MAGIC_PACKET */
+enum gelic_lv1_wol_mp_arg {
+ GELIC_LV1_WOL_MP_DISABLE = 0,
+ GELIC_LV1_WOL_MP_ENABLE = 1,
+};
+
+/* for GELIC_LV1_WOL_{ADD,DELETE}_MATCH_ADDR */
+enum gelic_lv1_wol_match_arg {
+ GELIC_LV1_WOL_MATCH_INDIVIDUAL = 0,
+ GELIC_LV1_WOL_MATCH_ALL = 1,
+};
+
/* status returened from GET_ETH_PORT_STATUS */
enum gelic_lv1_ether_port_status {
GELIC_LV1_ETHER_LINK_UP = 0x0000000000000001L,
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 80c9dec..9bd7c4a 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -117,6 +117,32 @@
EXPORT_SYMBOL(of_device_is_compatible);
/**
+ * of_device_is_available - check if a device is available for use
+ *
+ * @device: Node to check for availability
+ *
+ * Returns 1 if the status property is absent or set to "okay" or "ok",
+ * 0 otherwise
+ */
+int of_device_is_available(const struct device_node *device)
+{
+ const char *status;
+ int statlen;
+
+ status = of_get_property(device, "status", &statlen);
+ if (status == NULL)
+ return 1;
+
+ if (statlen > 0) {
+ if (!strcmp(status, "okay") || !strcmp(status, "ok"))
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(of_device_is_available);
+
+/**
* of_get_parent - Get a node's parent if any
* @node: Node to get parent
*
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index d4f6f96..7605453 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -24,6 +24,7 @@
#include <linux/reboot.h>
#include <asm/firmware.h>
+#include <asm/lv1call.h>
#include <asm/ps3.h>
#include "vuart.h"
@@ -187,6 +188,7 @@
* controller, and bluetooth controller.
* @PS3_SM_WAKE_RTC:
* @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
* @PS3_SM_WAKE_P_O_R: Power on reset.
*
* Additional wakeup sources when specifying PS3_SM_NEXT_OP_SYS_SHUTDOWN.
@@ -200,10 +202,19 @@
PS3_SM_WAKE_DEFAULT = 0,
PS3_SM_WAKE_RTC = 0x00000040,
PS3_SM_WAKE_RTC_ERROR = 0x00000080,
+ PS3_SM_WAKE_W_O_L = 0x00000400,
PS3_SM_WAKE_P_O_R = 0x80000000,
};
/**
+ * user_wake_sources - User specified wakeup sources.
+ *
+ * Logical OR of enum ps3_sys_manager_wake_source types.
+ */
+
+static u32 user_wake_sources = PS3_SM_WAKE_DEFAULT;
+
+/**
* enum ps3_sys_manager_cmd - Command from system manager to guest.
*
* The guest completes the actions needed, then acks or naks the command via
@@ -581,6 +592,23 @@
return -EIO;
}
+static void ps3_sys_manager_fin(struct ps3_system_bus_device *dev)
+{
+ ps3_sys_manager_send_request_shutdown(dev);
+
+ pr_emerg("System Halted, OK to turn off power\n");
+
+ while (ps3_sys_manager_handle_msg(dev)) {
+ /* pause until next DEC interrupt */
+ lv1_pause(0);
+ }
+
+ while (1) {
+ /* pause, ignoring DEC interrupt */
+ lv1_pause(1);
+ }
+}
+
/**
* ps3_sys_manager_final_power_off - The final platform machine_power_off routine.
*
@@ -601,13 +629,9 @@
ps3_vuart_cancel_async(dev);
ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_SHUTDOWN,
- PS3_SM_WAKE_DEFAULT);
- ps3_sys_manager_send_request_shutdown(dev);
+ user_wake_sources);
- pr_emerg("System Halted, OK to turn off power\n");
-
- while (1)
- ps3_sys_manager_handle_msg(dev);
+ ps3_sys_manager_fin(dev);
}
/**
@@ -638,16 +662,44 @@
ps3_sys_manager_send_attr(dev, 0);
ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_REBOOT,
- PS3_SM_WAKE_DEFAULT);
- ps3_sys_manager_send_request_shutdown(dev);
+ user_wake_sources);
- pr_emerg("System Halted, OK to turn off power\n");
-
- while (1)
- ps3_sys_manager_handle_msg(dev);
+ ps3_sys_manager_fin(dev);
}
/**
+ * ps3_sys_manager_get_wol - Get wake-on-lan setting.
+ */
+
+int ps3_sys_manager_get_wol(void)
+{
+ pr_debug("%s:%d\n", __func__, __LINE__);
+
+ return (user_wake_sources & PS3_SM_WAKE_W_O_L) != 0;
+}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_get_wol);
+
+/**
+ * ps3_sys_manager_set_wol - Set wake-on-lan setting.
+ */
+
+void ps3_sys_manager_set_wol(int state)
+{
+ static DEFINE_MUTEX(mutex);
+
+ mutex_lock(&mutex);
+
+ pr_debug("%s:%d: %d\n", __func__, __LINE__, state);
+
+ if (state)
+ user_wake_sources |= PS3_SM_WAKE_W_O_L;
+ else
+ user_wake_sources &= ~PS3_SM_WAKE_W_O_L;
+ mutex_unlock(&mutex);
+}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_set_wol);
+
+/**
* ps3_sys_manager_work - Asynchronous read handler.
*
* Signaled when PS3_SM_RX_MSG_LEN_MIN bytes arrive at the vuart port.
diff --git a/drivers/ps3/sys-manager-core.c b/drivers/ps3/sys-manager-core.c
index 31648f7..4742258 100644
--- a/drivers/ps3/sys-manager-core.c
+++ b/drivers/ps3/sys-manager-core.c
@@ -19,6 +19,7 @@
*/
#include <linux/kernel.h>
+#include <asm/lv1call.h>
#include <asm/ps3.h>
/**
@@ -50,10 +51,7 @@
if (ps3_sys_manager_ops.power_off)
ps3_sys_manager_ops.power_off(ps3_sys_manager_ops.dev);
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- while (1)
- (void)0;
+ ps3_sys_manager_halt();
}
void ps3_sys_manager_restart(void)
@@ -61,8 +59,14 @@
if (ps3_sys_manager_ops.restart)
ps3_sys_manager_ops.restart(ps3_sys_manager_ops.dev);
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ ps3_sys_manager_halt();
+}
+
+void ps3_sys_manager_halt(void)
+{
+ pr_emerg("System Halted, OK to turn off power\n");
local_irq_disable();
while (1)
- (void)0;
+ lv1_pause(1);
}
+
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index c0e50a4..8aacfb7 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -56,7 +56,9 @@
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT;
port->dev = &ofdev->dev;
- port->custom_divisor = *clk / (16 * (*spd));
+ /* If current-speed was set, then try not to change it. */
+ if (spd)
+ port->custom_divisor = *clk / (16 * (*spd));
return 0;
}
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
index 5f640e5..7381916 100644
--- a/include/asm-powerpc/Kbuild
+++ b/include/asm-powerpc/Kbuild
@@ -1,5 +1,6 @@
include include/asm-generic/Kbuild.asm
+header-y += a.out.h
header-y += auxvec.h
header-y += ioctls.h
header-y += mman.h
@@ -23,7 +24,6 @@
header-y += statfs.h
header-y += ps3fb.h
-unifdef-y += a.out.h
unifdef-y += asm-compat.h
unifdef-y += bootx.h
unifdef-y += byteorder.h
diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h
index 4aa2207..98324c5 100644
--- a/include/asm-powerpc/abs_addr.h
+++ b/include/asm-powerpc/abs_addr.h
@@ -12,10 +12,11 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lmb.h>
+
#include <asm/types.h>
#include <asm/page.h>
#include <asm/prom.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
struct mschunks_map {
diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h
index 8485c28..fb11b0c 100644
--- a/include/asm-powerpc/cputhreads.h
+++ b/include/asm-powerpc/cputhreads.h
@@ -35,7 +35,7 @@
res = CPU_MASK_NONE;
for (i = 0; i < NR_CPUS; i += threads_per_core) {
- cpus_shift_right(tmp, threads_core_mask, i);
+ cpus_shift_left(tmp, threads_core_mask, i);
if (cpus_intersects(threads, tmp))
cpu_set(i, res);
}
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index be6c879..f8398ce 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -82,6 +82,19 @@
spin_unlock_irqrestore(&dcr_ind_lock, flags);
}
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+ unsigned clr, unsigned set)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&dcr_ind_lock, flags);
+ __mtdcr(base_addr, reg);
+ val = (__mfdcr(base_data) & ~clr) | set;
+ __mtdcr(base_data, val);
+ spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \
DCRN_ ## base ## _CONFIG_DATA, \
reg)
@@ -90,6 +103,10 @@
DCRN_ ## base ## _CONFIG_DATA, \
reg, data)
+#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \
+ DCRN_ ## base ## _CONFIG_DATA, \
+ reg, clr, set)
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h
index 9f1fb98..29b0ece 100644
--- a/include/asm-powerpc/dcr-regs.h
+++ b/include/asm-powerpc/dcr-regs.h
@@ -68,4 +68,82 @@
#define SDR0_UART3 0x0123
#define SDR0_CUST0 0x4000
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR 0x00
+#define DCRN_SRAM0_SB1CR 0x01
+#define DCRN_SRAM0_SB2CR 0x02
+#define DCRN_SRAM0_SB3CR 0x03
+#define SRAM_SBCR_BU_MASK 0x00000180
+#define SRAM_SBCR_BS_64KB 0x00000800
+#define SRAM_SBCR_BU_RO 0x00000080
+#define SRAM_SBCR_BU_RW 0x00000180
+#define DCRN_SRAM0_BEAR 0x04
+#define DCRN_SRAM0_BESR0 0x05
+#define DCRN_SRAM0_BESR1 0x06
+#define DCRN_SRAM0_PMEG 0x07
+#define DCRN_SRAM0_CID 0x08
+#define DCRN_SRAM0_REVID 0x09
+#define DCRN_SRAM0_DPC 0x0a
+#define SRAM_DPC_ENABLE 0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG 0x00
+#define L2C_CFG_L2M 0x80000000
+#define L2C_CFG_ICU 0x40000000
+#define L2C_CFG_DCU 0x20000000
+#define L2C_CFG_DCW_MASK 0x1e000000
+#define L2C_CFG_TPC 0x01000000
+#define L2C_CFG_CPC 0x00800000
+#define L2C_CFG_FRAN 0x00200000
+#define L2C_CFG_SS_MASK 0x00180000
+#define L2C_CFG_SS_256 0x00000000
+#define L2C_CFG_CPIM 0x00040000
+#define L2C_CFG_TPIM 0x00020000
+#define L2C_CFG_LIM 0x00010000
+#define L2C_CFG_PMUX_MASK 0x00007000
+#define L2C_CFG_PMUX_SNP 0x00000000
+#define L2C_CFG_PMUX_IF 0x00001000
+#define L2C_CFG_PMUX_DF 0x00002000
+#define L2C_CFG_PMUX_DS 0x00003000
+#define L2C_CFG_PMIM 0x00000800
+#define L2C_CFG_TPEI 0x00000400
+#define L2C_CFG_CPEI 0x00000200
+#define L2C_CFG_NAM 0x00000100
+#define L2C_CFG_SMCM 0x00000080
+#define L2C_CFG_NBRM 0x00000040
+#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */
+#define DCRN_L2C0_CMD 0x01
+#define L2C_CMD_CLR 0x80000000
+#define L2C_CMD_DIAG 0x40000000
+#define L2C_CMD_INV 0x20000000
+#define L2C_CMD_CCP 0x10000000
+#define L2C_CMD_CTE 0x08000000
+#define L2C_CMD_STRC 0x04000000
+#define L2C_CMD_STPC 0x02000000
+#define L2C_CMD_RPMC 0x01000000
+#define L2C_CMD_HCC 0x00800000
+#define DCRN_L2C0_ADDR 0x02
+#define DCRN_L2C0_DATA 0x03
+#define DCRN_L2C0_SR 0x04
+#define L2C_SR_CC 0x80000000
+#define L2C_SR_CPE 0x40000000
+#define L2C_SR_TPE 0x20000000
+#define L2C_SR_LRU 0x10000000
+#define L2C_SR_PCS 0x08000000
+#define DCRN_L2C0_REVID 0x05
+#define DCRN_L2C0_SNP0 0x06
+#define DCRN_L2C0_SNP1 0x07
+#define L2C_SNP_BA_MASK 0xffff0000
+#define L2C_SNP_SSR_MASK 0x0000f000
+#define L2C_SNP_SSR_32G 0x0000f000
+#define L2C_SNP_ESR 0x00000800
+
#endif /* __DCR_REGS_H__ */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
index 5d1dc48..028184b 100644
--- a/include/asm-powerpc/lmb.h
+++ b/include/asm-powerpc/lmb.h
@@ -1,81 +1,15 @@
#ifndef _ASM_POWERPC_LMB_H
#define _ASM_POWERPC_LMB_H
-#ifdef __KERNEL__
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
+#include <asm/udbg.h>
-#include <linux/init.h>
-#include <asm/prom.h>
+#define LMB_DBG(fmt...) udbg_printf(fmt)
-#define MAX_LMB_REGIONS 128
+#ifdef CONFIG_PPC32
+extern unsigned long __max_low_memory;
+#define LMB_REAL_LIMIT __max_low_memory
+#else
+#define LMB_REAL_LIMIT 0
+#endif
-struct lmb_property {
- unsigned long base;
- unsigned long size;
-};
-
-struct lmb_region {
- unsigned long cnt;
- unsigned long size;
- struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
- unsigned long debug;
- unsigned long rmo_size;
- struct lmb_region memory;
- struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long __init lmb_add(unsigned long base, unsigned long size);
-extern long __init lmb_reserve(unsigned long base, unsigned long size);
-extern unsigned long __init lmb_alloc(unsigned long size, unsigned long align);
-extern unsigned long __init lmb_alloc_base(unsigned long size,
- unsigned long align, unsigned long max_addr);
-extern unsigned long __init __lmb_alloc_base(unsigned long size,
- unsigned long align, unsigned long max_addr);
-extern unsigned long __init lmb_phys_mem_size(void);
-extern unsigned long __init lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(unsigned long memory_limit);
-extern int __init lmb_is_reserved(unsigned long addr);
-
-extern void lmb_dump_all(void);
-
-static inline unsigned long
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].size;
-}
-static inline unsigned long
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_start_pfn(type, region_nr) +
- lmb_size_pages(type, region_nr);
-}
-
-#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_LMB_H */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 0872ec2..b95386a 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -68,6 +68,8 @@
unsigned long vflags,
int psize, int ssize);
long (*hpte_remove)(unsigned long hpte_group);
+ void (*hpte_removebolted)(unsigned long ea,
+ int psize, int ssize);
void (*flush_hash_range)(unsigned long number, int local);
/* special for kexec, to be called in real mode, linar mapping is
diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h
index b4526ff..19fd793 100644
--- a/include/asm-powerpc/pasemi_dma.h
+++ b/include/asm-powerpc/pasemi_dma.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 PA Semi, Inc
+ * Copyright (C) 2006-2008 PA Semi, Inc
*
* Hardware register layout and descriptor formats for the on-board
* DMA engine on PA Semi PWRficient. Used by ethernet, function and security
@@ -40,6 +40,11 @@
PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */
PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */
PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */
+ PAS_DMA_COM_CFG = 0x114, /* Common config reg */
+ PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */
+ PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */
+ PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */
+ PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */
};
@@ -123,11 +128,16 @@
#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100
#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */
+#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */
+#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */
+#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */
#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c
#define PAS_DMA_TXCHAN_CFG_TATTR_S 2
#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
PAS_DMA_TXCHAN_CFG_TATTR_M)
-#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0
+#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800
+#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400
+#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0
#define PAS_DMA_TXCHAN_CFG_WT_S 6
#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
PAS_DMA_TXCHAN_CFG_WT_M)
@@ -394,11 +404,62 @@
XCT_COPY_LLEN_M)
#define XCT_COPY_SE 0x0000000000000001ull
+/* Function descriptor fields */
+#define XCT_FUN_T 0x8000000000000000ull
+#define XCT_FUN_ST 0x4000000000000000ull
+#define XCT_FUN_RR_M 0x3000000000000000ull
+#define XCT_FUN_RR_NORES 0x0000000000000000ull
+#define XCT_FUN_RR_8BRES 0x1000000000000000ull
+#define XCT_FUN_RR_24BRES 0x2000000000000000ull
+#define XCT_FUN_RR_40BRES 0x3000000000000000ull
+#define XCT_FUN_I 0x0800000000000000ull
+#define XCT_FUN_O 0x0400000000000000ull
+#define XCT_FUN_E 0x0200000000000000ull
+#define XCT_FUN_FUN_M 0x01c0000000000000ull
+#define XCT_FUN_FUN_S 54
+#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M 0x0038000000000000ull
+#define XCT_FUN_CRM_NOP 0x0000000000000000ull
+#define XCT_FUN_CRM_SIG 0x0008000000000000ull
+#define XCT_FUN_LLEN_M 0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S 32
+#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M 0x00000000f8000000ull
+#define XCT_FUN_SHL_S 27
+#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M 0x0000000007c00000ull
+#define XCT_FUN_HSZ_M 0x00000000003c0000ull
+#define XCT_FUN_ALG_M 0x0000000000038000ull
+#define XCT_FUN_HP 0x0000000000004000ull
+#define XCT_FUN_BCM_M 0x0000000000003800ull
+#define XCT_FUN_BCP_M 0x0000000000000600ull
+#define XCT_FUN_SIG_M 0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4 0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6 0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4 0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6 0x0000000000000170ull
+#define XCT_FUN_A 0x0000000000000008ull
+#define XCT_FUN_C 0x0000000000000004ull
+#define XCT_FUN_AL2 0x0000000000000002ull
+#define XCT_FUN_SE 0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S 32
+#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S 0
+
/* Control descriptor fields */
#define CTRL_CMD_T 0x8000000000000000ull
#define CTRL_CMD_META_EVT 0x2000000000000000ull
#define CTRL_CMD_O 0x0400000000000000ull
-#define CTRL_CMD_REG_M 0x000000000000000full
+#define CTRL_CMD_ETYPE_M 0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull
+#define CTRL_CMD_REG_M 0x000000000000007full
#define CTRL_CMD_REG_S 0
#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \
CTRL_CMD_REG_M)
@@ -461,6 +522,16 @@
extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
dma_addr_t *handle);
+/* Routines to allocate flags (events) for channel syncronization */
+extern int pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
/* Initialize the library, must be called before any other functions */
extern int pasemi_dma_init(void);
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 2c79f55..bd5b401 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -420,7 +420,8 @@
#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+ defined(CONFIG_KPROBES)
/* We want the debuggers to be able to set breakpoints anywhere, so
* don't write protect the kernel text */
#define _PAGE_RAM_TEXT _PAGE_RAM
diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h
new file mode 100644
index 0000000..209a989
--- /dev/null
+++ b/include/asm-powerpc/phyp_dump.h
@@ -0,0 +1,45 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END (1UL<<28)
+
+struct phyp_dump {
+ /* Memory that is reserved during very early boot. */
+ unsigned long init_reserve_start;
+ unsigned long init_reserve_size;
+ /* Check status during boot if dump supported, active & present*/
+ unsigned long phyp_dump_at_boot;
+ unsigned long phyp_dump_configured;
+ unsigned long phyp_dump_is_active;
+ /* store cpu & hpte size */
+ unsigned long cpu_state_size;
+ unsigned long hpte_region_size;
+ /* previous scratch area values */
+ unsigned long reserved_scratch_addr;
+ unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+ const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h
new file mode 100644
index 0000000..033039a
--- /dev/null
+++ b/include/asm-powerpc/ppc4xx.h
@@ -0,0 +1,18 @@
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 2b69367..9e8ed68 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -434,8 +434,11 @@
};
void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
-void ps3_sys_manager_power_off(void);
-void ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
struct ps3_prealloc {
const char *name;
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
index e8b493d..9aea8e9 100644
--- a/include/asm-powerpc/sparsemem.h
+++ b/include/asm-powerpc/sparsemem.h
@@ -15,6 +15,7 @@
#ifdef CONFIG_MEMORY_HOTPLUG
extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
#ifdef CONFIG_NUMA
extern int hot_add_scn_to_nid(unsigned long scn_addr);
#else
diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h
index aa40f92..e40010a 100644
--- a/include/asm-powerpc/string.h
+++ b/include/asm-powerpc/string.h
@@ -7,6 +7,7 @@
#define __HAVE_ARCH_STRNCPY
#define __HAVE_ARCH_STRLEN
#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
#define __HAVE_ARCH_STRCAT
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
@@ -18,6 +19,7 @@
extern char * strncpy(char *,const char *, __kernel_size_t);
extern __kernel_size_t strlen(const char *);
extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
extern char * strcat(char *, const char *);
extern void * memset(void *,int,__kernel_size_t);
extern void * memcpy(void *,const void *,__kernel_size_t);
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
new file mode 100644
index 0000000..6a352cb
--- /dev/null
+++ b/include/asm-sparc64/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT 0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
new file mode 100644
index 0000000..632717c
--- /dev/null
+++ b/include/linux/lmb.h
@@ -0,0 +1,83 @@
+#ifndef _LINUX_LMB_H
+#define _LINUX_LMB_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_LMB_REGIONS 128
+
+struct lmb_property {
+ u64 base;
+ u64 size;
+};
+
+struct lmb_region {
+ unsigned long cnt;
+ u64 size;
+ struct lmb_property region[MAX_LMB_REGIONS+1];
+};
+
+struct lmb {
+ unsigned long debug;
+ u64 rmo_size;
+ struct lmb_region memory;
+ struct lmb_region reserved;
+};
+
+extern struct lmb lmb;
+
+extern void __init lmb_init(void);
+extern void __init lmb_analyze(void);
+extern long __init lmb_add(u64 base, u64 size);
+extern long __init lmb_reserve(u64 base, u64 size);
+extern u64 __init lmb_alloc(u64 size, u64 align);
+extern u64 __init lmb_alloc_base(u64 size,
+ u64, u64 max_addr);
+extern u64 __init __lmb_alloc_base(u64 size,
+ u64 align, u64 max_addr);
+extern u64 __init lmb_phys_mem_size(void);
+extern u64 __init lmb_end_of_DRAM(void);
+extern void __init lmb_enforce_memory_limit(u64 memory_limit);
+extern int __init lmb_is_reserved(u64 addr);
+
+extern void lmb_dump_all(void);
+
+static inline u64
+lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].size;
+}
+static inline u64
+lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
+{
+ return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+ return lmb_start_pfn(type, region_nr) +
+ lmb_size_pages(type, region_nr);
+}
+
+#include <asm/lmb.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_LMB_H */
diff --git a/include/linux/of.h b/include/linux/of.h
index 6981016..59a61bd 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -62,6 +62,7 @@
int *lenp);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
+extern int of_device_is_available(const struct device_node *device);
extern const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp);
diff --git a/lib/Kconfig b/lib/Kconfig
index ba3d104..2d53dc0 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -141,4 +141,7 @@
config CHECK_SIGNATURE
bool
+config HAVE_LMB
+ boolean
+
endmenu
diff --git a/lib/Makefile b/lib/Makefile
index 23de261..61bba16 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -70,6 +70,8 @@
lib-$(CONFIG_GENERIC_BUG) += bug.o
+obj-$(CONFIG_HAVE_LMB) += lmb.o
+
hostprogs-y := gen_crc32table
clean-files := crc32table.h
diff --git a/arch/powerpc/mm/lmb.c b/lib/lmb.c
similarity index 67%
rename from arch/powerpc/mm/lmb.c
rename to lib/lmb.c
index 4ce23bc..3c43b95fe 100644
--- a/arch/powerpc/mm/lmb.c
+++ b/lib/lmb.c
@@ -3,7 +3,7 @@
*
* Peter Bergner, IBM Corp. June 2001.
* Copyright (C) 2001 Peter Bergner.
- *
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
@@ -13,19 +13,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bitops.h>
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#ifdef CONFIG_PPC32
-#include "mmu_decl.h" /* for __max_low_memory */
-#endif
+#include <linux/lmb.h>
#undef DEBUG
#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) LMB_DBG(fmt)
#else
#define DBG(fmt...)
#endif
@@ -41,33 +34,34 @@
DBG("lmb_dump_all:\n");
DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
- DBG(" memory.size = 0x%lx\n", lmb.memory.size);
+ DBG(" memory.size = 0x%llx\n",
+ (unsigned long long)lmb.memory.size);
for (i=0; i < lmb.memory.cnt ;i++) {
- DBG(" memory.region[0x%x].base = 0x%lx\n",
- i, lmb.memory.region[i].base);
- DBG(" .size = 0x%lx\n",
- lmb.memory.region[i].size);
+ DBG(" memory.region[0x%x].base = 0x%llx\n",
+ i, (unsigned long long)lmb.memory.region[i].base);
+ DBG(" .size = 0x%llx\n",
+ (unsigned long long)lmb.memory.region[i].size);
}
DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
DBG(" reserved.size = 0x%lx\n", lmb.reserved.size);
for (i=0; i < lmb.reserved.cnt ;i++) {
- DBG(" reserved.region[0x%x].base = 0x%lx\n",
- i, lmb.reserved.region[i].base);
- DBG(" .size = 0x%lx\n",
- lmb.reserved.region[i].size);
+ DBG(" reserved.region[0x%x].base = 0x%llx\n",
+ i, (unsigned long long)lmb.reserved.region[i].base);
+ DBG(" .size = 0x%llx\n",
+ (unsigned long long)lmb.reserved.region[i].size);
}
#endif /* DEBUG */
}
-static unsigned long __init lmb_addrs_overlap(unsigned long base1,
- unsigned long size1, unsigned long base2, unsigned long size2)
+static unsigned long __init lmb_addrs_overlap(u64 base1,
+ u64 size1, u64 base2, u64 size2)
{
return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
}
-static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
- unsigned long base2, unsigned long size2)
+static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
+ u64 base2, u64 size2)
{
if (base2 == base1 + size1)
return 1;
@@ -80,10 +74,10 @@
static long __init lmb_regions_adjacent(struct lmb_region *rgn,
unsigned long r1, unsigned long r2)
{
- unsigned long base1 = rgn->region[r1].base;
- unsigned long size1 = rgn->region[r1].size;
- unsigned long base2 = rgn->region[r2].base;
- unsigned long size2 = rgn->region[r2].size;
+ u64 base1 = rgn->region[r1].base;
+ u64 size1 = rgn->region[r1].size;
+ u64 base2 = rgn->region[r2].base;
+ u64 size2 = rgn->region[r2].size;
return lmb_addrs_adjacent(base1, size1, base2, size2);
}
@@ -135,16 +129,21 @@
}
/* This routine called with relocation disabled. */
-static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
- unsigned long size)
+static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
{
unsigned long coalesced = 0;
long adjacent, i;
+ if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ return 0;
+ }
+
/* First try and coalesce this LMB with another. */
for (i=0; i < rgn->cnt; i++) {
- unsigned long rgnbase = rgn->region[i].base;
- unsigned long rgnsize = rgn->region[i].size;
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
if ((rgnbase == base) && (rgnsize == size))
/* Already have this region, so we're done */
@@ -185,13 +184,18 @@
break;
}
}
+
+ if (base < rgn->region[0].base) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ }
rgn->cnt++;
return 0;
}
/* This routine may be called with relocation disabled. */
-long __init lmb_add(unsigned long base, unsigned long size)
+long __init lmb_add(u64 base, u64 size)
{
struct lmb_region *_rgn = &(lmb.memory);
@@ -203,7 +207,7 @@
}
-long __init lmb_reserve(unsigned long base, unsigned long size)
+long __init lmb_reserve(u64 base, u64 size)
{
struct lmb_region *_rgn = &(lmb.reserved);
@@ -212,14 +216,14 @@
return lmb_add_region(_rgn, base, size);
}
-long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
- unsigned long size)
+long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base,
+ u64 size)
{
unsigned long i;
for (i=0; i < rgn->cnt; i++) {
- unsigned long rgnbase = rgn->region[i].base;
- unsigned long rgnsize = rgn->region[i].size;
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
break;
}
@@ -228,54 +232,61 @@
return (i < rgn->cnt) ? i : -1;
}
-unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
+u64 __init lmb_alloc(u64 size, u64 align)
{
return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
}
-unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
- unsigned long max_addr)
+u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
{
- unsigned long alloc;
+ u64 alloc;
alloc = __lmb_alloc_base(size, align, max_addr);
if (alloc == 0)
- panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
- size, max_addr);
+ panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+ (unsigned long long) size, (unsigned long long) max_addr);
return alloc;
}
-unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align,
- unsigned long max_addr)
+static u64 lmb_align_down(u64 addr, u64 size)
+{
+ return addr & ~(size - 1);
+}
+
+static u64 lmb_align_up(u64 addr, u64 size)
+{
+ return (addr + (size - 1)) & ~(size - 1);
+}
+
+u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
{
long i, j;
- unsigned long base = 0;
+ u64 base = 0;
BUG_ON(0 == size);
-#ifdef CONFIG_PPC32
- /* On 32-bit, make sure we allocate lowmem */
+ /* On some platforms, make sure we allocate lowmem */
if (max_addr == LMB_ALLOC_ANYWHERE)
- max_addr = __max_low_memory;
-#endif
+ max_addr = LMB_REAL_LIMIT;
+
for (i = lmb.memory.cnt-1; i >= 0; i--) {
- unsigned long lmbbase = lmb.memory.region[i].base;
- unsigned long lmbsize = lmb.memory.region[i].size;
+ u64 lmbbase = lmb.memory.region[i].base;
+ u64 lmbsize = lmb.memory.region[i].size;
if (max_addr == LMB_ALLOC_ANYWHERE)
- base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
+ base = lmb_align_down(lmbbase + lmbsize - size, align);
else if (lmbbase < max_addr) {
base = min(lmbbase + lmbsize, max_addr);
- base = _ALIGN_DOWN(base - size, align);
+ base = lmb_align_down(base - size, align);
} else
continue;
while ((lmbbase <= base) &&
((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
- base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
- align);
+ base = lmb_align_down(lmb.reserved.region[j].base - size,
+ align);
if ((base != 0) && (lmbbase <= base))
break;
@@ -284,18 +295,19 @@
if (i < 0)
return 0;
- lmb_add_region(&lmb.reserved, base, size);
+ if (lmb_add_region(&lmb.reserved, base, lmb_align_up(size, align)) < 0)
+ return 0;
return base;
}
/* You must call lmb_analyze() before this. */
-unsigned long __init lmb_phys_mem_size(void)
+u64 __init lmb_phys_mem_size(void)
{
return lmb.memory.size;
}
-unsigned long __init lmb_end_of_DRAM(void)
+u64 __init lmb_end_of_DRAM(void)
{
int idx = lmb.memory.cnt - 1;
@@ -303,9 +315,10 @@
}
/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(unsigned long memory_limit)
+void __init lmb_enforce_memory_limit(u64 memory_limit)
{
- unsigned long i, limit;
+ unsigned long i;
+ u64 limit;
struct lmb_property *p;
if (! memory_limit)
@@ -343,13 +356,13 @@
}
}
-int __init lmb_is_reserved(unsigned long addr)
+int __init lmb_is_reserved(u64 addr)
{
int i;
for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long upper = lmb.reserved.region[i].base +
- lmb.reserved.region[i].size - 1;
+ u64 upper = lmb.reserved.region[i].base +
+ lmb.reserved.region[i].size - 1;
if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
return 1;
}