Merge branch 'for-rmk-rc' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6
diff --git a/Documentation/arm/empeg/README b/Documentation/arm/empeg/README
deleted file mode 100644
index 09cc8d0..0000000
--- a/Documentation/arm/empeg/README
+++ /dev/null
@@ -1,13 +0,0 @@
-Empeg, Ltd's Empeg MP3 Car Audio Player
-
-The initial design is to go in your car, but you can use it at home, on a
-boat... almost anywhere. The principle is to store CD-quality music using
-MPEG technology onto a hard disk in the unit, and use the power of the
-embedded computer to serve up the music you want.
-
-For more details, see:
-
- http://www.empeg.com
-
-
-
diff --git a/Documentation/arm/empeg/ir.txt b/Documentation/arm/empeg/ir.txt
deleted file mode 100644
index 10a2974..0000000
--- a/Documentation/arm/empeg/ir.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Infra-red driver documentation.
-
-Mike Crowe <mac@empeg.com>
-(C) Empeg Ltd 1999
-
-Not a lot here yet :-)
-
-The Kenwood KCA-R6A remote control generates a sequence like the following:
-
-Go low for approx 16T (Around 9000us)
-Go high for approx 8T (Around 4000us)
-Go low for less than 2T (Around 750us)
-
-For each of the 32 bits
- Go high for more than 2T (Around 1500us) == 1
- Go high for less than T (Around 400us) == 0
- Go low for less than 2T (Around 750us)
-
-Rather than repeat a signal when the button is held down certain buttons
-generate the following code to indicate repetition.
-
-Go low for approx 16T
-Go high for approx 4T
-Go low for less than 2T
-
-(By removing the <2T from the start of the sequence and placing at the end
- it can be considered a stop bit but I found it easier to deal with it at
- the start).
-
-The 32 bits are encoded as XxYy where x and y are the actual data values
-while X and Y are the logical inverses of the associated data values. Using
-LSB first yields sensible codes for the numbers.
-
-All codes are of the form b9xx
-
-The numeric keys generate the code 0x where x is the number pressed.
-
-Tuner 1c
-Tape 1d
-CD 1e
-CD-MD-CH 1f
-Track- 0a
-Track+ 0b
-Rewind 0c
-FF 0d
-DNPP 5e
-Play/Pause 0e
-Vol+ 14
-Vol- 15
diff --git a/Documentation/arm/empeg/mkdevs b/Documentation/arm/empeg/mkdevs
deleted file mode 100644
index 7a85e28..0000000
--- a/Documentation/arm/empeg/mkdevs
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-mknod /dev/display c 244 0
-mknod /dev/ir c 242 0
-mknod /dev/usb0 c 243 0
-mknod /dev/audio c 245 4
-mknod /dev/dsp c 245 3
-mknod /dev/mixer c 245 0
-mknod /dev/empeg_state c 246 0
-mknod /dev/radio0 c 81 64
-ln -sf radio0 radio
-ln -sf usb0 usb
diff --git a/MAINTAINERS b/MAINTAINERS
index 16202c8..bfce9bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -610,6 +610,11 @@
M: philipp.zabel@gmail.com
S: Maintained
+ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
+P: Michael Petchkovsky
+M: mkpetch@internode.on.net
+S: Maintained
+
ARM/TOSA MACHINE SUPPORT
P: Dmitry Baryshkov
M: dbaryshkov@gmail.com
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index db83091..780bbf7 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -54,11 +54,13 @@
/*
* Prototypes
*/
+#ifdef CONFIG_PM
static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_temp(void);
static int sharpsl_check_battery_voltage(void);
-static int sharpsl_ac_check(void);
static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
static int sharpsl_average_value(int ad);
static void sharpsl_average_clear(void);
static void sharpsl_charge_toggle(struct work_struct *private_);
@@ -424,6 +426,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int sharpsl_check_battery_voltage(void)
{
int val, i, buff[5];
@@ -455,6 +458,7 @@
return 0;
}
+#endif
static int sharpsl_ac_check(void)
{
@@ -586,8 +590,6 @@
return 0;
}
-#endif
-
/*
* Check for fatal battery errors
@@ -738,7 +740,10 @@
}
}
}
-
+#else
+#define sharpsl_pm_suspend NULL
+#define sharpsl_pm_resume NULL
+#endif
static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -768,10 +773,12 @@
info->battery_life = sharpsl_pm.battstat.mainbat_percent;
}
+#ifdef CONFIG_PM
static struct platform_suspend_ops sharpsl_pm_ops = {
.enter = corgi_pxa_pm_enter,
.valid = suspend_valid_only_mem,
};
+#endif
static int __init sharpsl_pm_probe(struct platform_device *pdev)
{
@@ -802,7 +809,9 @@
apm_get_power_status = sharpsl_apm_get_power_status;
+#ifdef CONFIG_PM
suspend_set_ops(&sharpsl_pm_ops);
+#endif
mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 76d76e2..bffa674 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
#define __ASM_ARCH_AT91RM9200_GPIO_H
+#include <linux/kernel.h>
#include <asm/irq.h>
#define PIN_BASE NR_AIC_IRQS
@@ -220,6 +221,7 @@
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
}
extern int gpio_direction_input(unsigned gpio);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index de53f0b..48345fb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -26,6 +26,7 @@
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/delay.h>
@@ -449,12 +450,13 @@
},
};
+
static struct platform_device ep93xx_ohci_device = {
.name = "ep93xx-ohci",
.id = -1,
.dev = {
- .dma_mask = (void *)0xffffffff,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
.resource = ep93xx_ohci_resources,
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
index 6e3d795..502d5aa 100644
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -1,5 +1,6 @@
#ifndef _IMX_GPIO_H
+#include <linux/kernel.h>
#include <mach/imx-regs.h>
#define IMX_GPIO_ALLOC_MODE_NORMAL 0
@@ -63,6 +64,8 @@
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
+
imx_gpio_free(gpio);
}
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index 9fbde17..cd5aec2 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -25,6 +25,7 @@
#ifndef __ASM_ARCH_IXP4XX_GPIO_H
#define __ASM_ARCH_IXP4XX_GPIO_H
+#include <linux/kernel.h>
#include <mach/hardware.h>
static inline int gpio_request(unsigned gpio, const char *label)
@@ -34,6 +35,8 @@
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
+
return;
}
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index 73c8416..d4af5c3 100644
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_GPIO_H_
#define __ASM_ARCH_GPIO_H_
+#include <linux/kernel.h>
+
#define KS8695_GPIO_0 0
#define KS8695_GPIO_1 1
#define KS8695_GPIO_2 2
@@ -74,6 +76,7 @@
static inline void gpio_free(unsigned int pin)
{
+ might_sleep();
}
#endif
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index 5241e6a..5503ca0 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -8,6 +8,7 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/spinlock.h>
@@ -63,6 +64,7 @@
void gpio_free(unsigned gpio)
{
+ might_sleep();
clear_bit(gpio, gpiores);
return;
}
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index fc41986..f99d088 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -165,6 +165,8 @@
void gpio_free(unsigned pin)
{
+ might_sleep();
+
if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return;
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index eb7d6c9..e352590 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -204,7 +204,9 @@
.read_devdata = corgipm_read_devdata,
.charger_wakeup = corgi_charger_wakeup,
.should_wakeup = corgi_should_wakeup,
-#ifdef CONFIG_BACKLIGHT_CORGI
+#if defined(CONFIG_LCD_CORGI)
+ .backlight_limit = corgi_lcd_limit_intensity,
+#elif defined(CONFIG_BACKLIGHT_CORGI)
.backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
index 3b1d4a7..8242e14 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
@@ -26,6 +26,7 @@
* SharpSL Backlight
*/
extern void corgibl_limit_intensity(int limit);
+extern void corgi_lcd_limit_intensity(int limit);
/*
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 524f656..f0a5bba 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -385,6 +385,16 @@
if (err)
goto err_free_2;
+ err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
+ if (err)
+ goto err_free_3;
+ err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
+ if (err)
+ goto err_free_3;
+ err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
+ if (err)
+ goto err_free_3;
+
if (machine_is_akita()) {
spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -394,6 +404,8 @@
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
return;
+err_free_3:
+ gpio_free(SPITZ_GPIO_MAX1111_CS);
err_free_2:
gpio_free(SPITZ_GPIO_LCDCON_CS);
err_free_1:
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 53018db..072e77c 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -198,7 +198,9 @@
.read_devdata = spitzpm_read_devdata,
.charger_wakeup = spitz_charger_wakeup,
.should_wakeup = spitz_should_wakeup,
-#ifdef CONFIG_BACKLIGHT_CORGI
+#if defined(CONFIG_LCD_CORGI)
+ .backlight_limit = corgi_lcd_limit_intensity,
+#elif defined(CONFIG_BACKLIGHT_CORGI)
.backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 04dc8b6..8f6cf56 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -349,7 +349,7 @@
cpu_xsc3_mt_table:
.long 0x00 @ L_PTE_MT_UNCACHED
.long PTE_EXT_TEX(1) @ L_PTE_MT_BUFFERABLE
- .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
+ .long PTE_EXT_TEX(5) | PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
.long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
.long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
.long 0x00 @ unused
diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c
index 2768c69..1f3cc51 100644
--- a/drivers/leds/leds-da903x.c
+++ b/drivers/leds/leds-da903x.c
@@ -58,7 +58,7 @@
offset = DA9030_LED_OFFSET(led->id);
val = led->flags & ~0x87;
val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
- val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */
+ val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */
da903x_write(led->master, DA9030_LED1_CONTROL + offset, val);
break;
case DA9030_ID_VIBRA:
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 696cf36..2fadf32 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -391,6 +391,7 @@
static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmci_host *host = mmc_priv(mmc);
+ unsigned long flags;
WARN_ON(host->mrq != NULL);
@@ -402,7 +403,7 @@
return;
}
- spin_lock_irq(&host->lock);
+ spin_lock_irqsave(&host->lock, flags);
host->mrq = mrq;
@@ -411,7 +412,7 @@
mmci_start_command(host, mrq->cmd, 0);
- spin_unlock_irq(&host->lock);
+ spin_unlock_irqrestore(&host->lock, flags);
}
static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index 2afd47e..f8a4bb2 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -439,7 +439,7 @@
return corgi_bl_set_intensity(lcd, intensity);
}
-void corgibl_limit_intensity(int limit)
+void corgi_lcd_limit_intensity(int limit)
{
if (limit)
corgibl_flags |= CORGIBL_BATTLOW;
@@ -448,7 +448,7 @@
backlight_update_status(the_corgi_lcd->bl_dev);
}
-EXPORT_SYMBOL(corgibl_limit_intensity);
+EXPORT_SYMBOL(corgi_lcd_limit_intensity);
static struct backlight_ops corgi_bl_ops = {
.get_brightness = corgi_bl_get_intensity,