diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 677f577..434df7f 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -238,6 +238,15 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called io_ti.
 
+config USB_SERIAL_F81232
+	tristate "USB Fintek F81232 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Fintek F81232 single
+	  port usb to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called f81232.
+
 config USB_SERIAL_GARMIN
        tristate "USB Garmin GPS driver"
        help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 9e536ee..5ac438b 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -23,6 +23,7 @@
 obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
 obj-$(CONFIG_USB_SERIAL_EMPEG)			+= empeg.o
+obj-$(CONFIG_USB_SERIAL_F81232)			+= f81232.o
 obj-$(CONFIG_USB_SERIAL_FTDI_SIO)		+= ftdi_sio.o
 obj-$(CONFIG_USB_SERIAL_FUNSOFT)		+= funsoft.o
 obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
new file mode 100644
index 0000000..88c0b19
--- /dev/null
+++ b/drivers/usb/serial/f81232.c
@@ -0,0 +1,405 @@
+/*
+ * Fintek F81232 USB to serial adaptor driver
+ *
+ * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
+ * Copyright (C) 2012 Linux Foundation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static bool debug;
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x1934, 0x0706) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define CONTROL_DTR			0x01
+#define CONTROL_RTS			0x02
+
+#define UART_STATE			0x08
+#define UART_STATE_TRANSIENT_MASK	0x74
+#define UART_DCD			0x01
+#define UART_DSR			0x02
+#define UART_BREAK_ERROR		0x04
+#define UART_RING			0x08
+#define UART_FRAME_ERROR		0x10
+#define UART_PARITY_ERROR		0x20
+#define UART_OVERRUN_ERROR		0x40
+#define UART_CTS			0x80
+
+struct f81232_private {
+	spinlock_t lock;
+	wait_queue_head_t delta_msr_wait;
+	u8 line_control;
+	u8 line_status;
+};
+
+static void f81232_update_line_status(struct usb_serial_port *port,
+				      unsigned char *data,
+				      unsigned int actual_length)
+{
+}
+
+static void f81232_read_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port =  urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned int actual_length = urb->actual_length;
+	int status = urb->status;
+	int retval;
+
+	dbg("%s (%d)", __func__, port->number);
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    status);
+		goto exit;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __func__,
+			      urb->actual_length, urb->transfer_buffer);
+
+	f81232_update_line_status(port, data, actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+}
+
+static void f81232_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
+	unsigned long flags;
+	u8 line_status;
+	int i;
+
+	/* update line status */
+	spin_lock_irqsave(&priv->lock, flags);
+	line_status = priv->line_status;
+	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	wake_up_interruptible(&priv->delta_msr_wait);
+
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	/* break takes precedence over parity, */
+	/* which takes precedence over framing errors */
+	if (line_status & UART_BREAK_ERROR)
+		tty_flag = TTY_BREAK;
+	else if (line_status & UART_PARITY_ERROR)
+		tty_flag = TTY_PARITY;
+	else if (line_status & UART_FRAME_ERROR)
+		tty_flag = TTY_FRAME;
+	dbg("%s - tty_flag = %d", __func__, tty_flag);
+
+	/* overrun is special, not associated with a char */
+	if (line_status & UART_OVERRUN_ERROR)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+	if (port->port.console && port->sysrq) {
+		for (i = 0; i < urb->actual_length; ++i)
+			if (!usb_serial_handle_sysrq_char(port, data[i]))
+				tty_insert_flip_char(tty, data[i], tty_flag);
+	} else {
+		tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	}
+
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+static int set_control_lines(struct usb_device *dev, u8 value)
+{
+	/* FIXME - Stubbed out for now */
+	return 0;
+}
+
+static void f81232_break_ctl(struct tty_struct *tty, int break_state)
+{
+	/* FIXME - Stubbed out for now */
+
+	/*
+	 * break_state = -1 to turn on break, and 0 to turn off break
+	 * see drivers/char/tty_io.c to see it used.
+	 * last_set_data_urb_value NEVER has the break bit set in it.
+	 */
+}
+
+static void f81232_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
+{
+	/* FIXME - Stubbed out for now */
+
+	/* Don't change anything if nothing has changed */
+	if (!tty_termios_hw_change(tty->termios, old_termios))
+		return;
+
+	/* Do the real work here... */
+}
+
+static int f81232_tiocmget(struct tty_struct *tty)
+{
+	/* FIXME - Stubbed out for now */
+	return 0;
+}
+
+static int f81232_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	/* FIXME - Stubbed out for now */
+	return 0;
+}
+
+static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ktermios tmp_termios;
+	int result;
+
+	/* Setup termios */
+	if (tty)
+		f81232_set_termios(tty, port, &tmp_termios);
+
+	dbg("%s - submitting interrupt urb", __func__);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+			" error %d\n", __func__, result);
+		return result;
+	}
+
+	result = usb_serial_generic_open(tty, port);
+	if (result) {
+		usb_kill_urb(port->interrupt_in_urb);
+		return result;
+	}
+
+	port->port.drain_delay = 256;
+	return 0;
+}
+
+static void f81232_close(struct usb_serial_port *port)
+{
+	usb_serial_generic_close(port);
+	usb_kill_urb(port->interrupt_in_urb);
+}
+
+static void f81232_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
+
+static int f81232_carrier_raised(struct usb_serial_port *port)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	unsigned int prevstatus;
+	unsigned int status;
+	unsigned int changed;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	prevstatus = priv->line_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (1) {
+		interruptible_sleep_on(&priv->delta_msr_wait);
+		/* see if a signal did it */
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		status = priv->line_status;
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		changed = prevstatus ^ status;
+
+		if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
+		    ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
+		    ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
+		    ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
+			return 0;
+		}
+		prevstatus = status;
+	}
+	/* NOTREACHED */
+	return 0;
+}
+
+static int f81232_ioctl(struct tty_struct *tty,
+			unsigned int cmd, unsigned long arg)
+{
+	struct serial_struct ser;
+	struct usb_serial_port *port = tty->driver_data;
+	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		memset(&ser, 0, sizeof ser);
+		ser.type = PORT_16654;
+		ser.line = port->serial->minor;
+		ser.port = port->number;
+		ser.baud_base = 460800;
+
+		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+			return -EFAULT;
+
+		return 0;
+
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		return wait_modem_info(port, arg);
+	default:
+		dbg("%s not supported = 0x%04x", __func__, cmd);
+		break;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static int f81232_startup(struct usb_serial *serial)
+{
+	struct f81232_private *priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
+		if (!priv)
+			goto cleanup;
+		spin_lock_init(&priv->lock);
+		init_waitqueue_head(&priv->delta_msr_wait);
+		usb_set_serial_port_data(serial->port[i], priv);
+	}
+	return 0;
+
+cleanup:
+	for (--i; i >= 0; --i) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(priv);
+		usb_set_serial_port_data(serial->port[i], NULL);
+	}
+	return -ENOMEM;
+}
+
+static void f81232_release(struct usb_serial *serial)
+{
+	int i;
+	struct f81232_private *priv;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(priv);
+	}
+}
+
+static struct usb_driver f81232_driver = {
+	.name =		"f81232",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.suspend =      usb_serial_suspend,
+	.resume =       usb_serial_resume,
+	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
+};
+
+static struct usb_serial_driver f81232_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"f81232",
+	},
+	.id_table =		id_table,
+	.usb_driver = 		&f81232_driver,
+	.num_ports =		1,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
+	.open =			f81232_open,
+	.close =		f81232_close,
+	.dtr_rts = 		f81232_dtr_rts,
+	.carrier_raised =	f81232_carrier_raised,
+	.ioctl =		f81232_ioctl,
+	.break_ctl =		f81232_break_ctl,
+	.set_termios =		f81232_set_termios,
+	.tiocmget =		f81232_tiocmget,
+	.tiocmset =		f81232_tiocmset,
+	.process_read_urb =	f81232_process_read_urb,
+	.read_int_callback =	f81232_read_int_callback,
+	.attach =		f81232_startup,
+	.release =		f81232_release,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&f81232_device,
+	NULL,
+};
+
+module_usb_serial_driver(f81232_driver, serial_drivers);
+
+MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
+MODULE_LICENSE("GPL v2");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+