diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml
index 858fd7d..8576481 100644
--- a/Documentation/DocBook/media/dvb/dvbapi.xml
+++ b/Documentation/DocBook/media/dvb/dvbapi.xml
@@ -125,9 +125,6 @@
 	&sub-audio;
     </section>
   </chapter>
-  <chapter id="dvb_kdapi">
-    &sub-kdapi;
-  </chapter>
   <chapter id="dvb_examples">
     &sub-examples;
   </chapter>
diff --git a/Documentation/DocBook/media/dvb/kdapi.xml b/Documentation/DocBook/media/dvb/kdapi.xml
deleted file mode 100644
index ff133a3..0000000
--- a/Documentation/DocBook/media/dvb/kdapi.xml
+++ /dev/null
@@ -1,1236 +0,0 @@
-<title>Kernel Demux API</title>
-<para>The kernel demux API defines a driver-internal interface for registering low-level,
-hardware specific driver to a hardware independent demux layer. It is only of interest for
-DVB device driver writers. The header file for this API is named <constant>demux.h</constant> and located in
-<constant>">drivers/media/dvb-core</constant>.
-</para>
-<para>Maintainer note: This section must be reviewed. It is probably out of date.
-</para>
-
-<section id="kernel_demux_data_types">
-<title>Kernel Demux Data Types</title>
-
-
-</section>
-<section id="ts_filter_types">
-<title>TS filter types</title>
- <programlisting>
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
- /&#x22C6; TS packet reception &#x22C6;/
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
-
- /&#x22C6; TS filter type for set_type() &#x22C6;/
-
- #define TS_PACKET       1   /&#x22C6; send TS packets (188 bytes) to callback (default) &#x22C6;/
- #define TS_PAYLOAD_ONLY 2   /&#x22C6; in case TS_PACKET is set, only send the TS
-				payload (&#x003C;=184 bytes per packet) to callback &#x22C6;/
- #define TS_DECODER      4   /&#x22C6; send stream to built-in decoder (if present) &#x22C6;/
-</programlisting>
-
-</section>
-<section id="dmx_ts_pes_t">
-<title>dmx_ts_pes_t</title>
-<para>The structure
-</para>
-<programlisting>
- typedef enum
- {
-	 DMX_TS_PES_AUDIO,   /&#x22C6; also send packets to audio decoder (if it exists) &#x22C6;/
-	 DMX_TS_PES_VIDEO,   /&#x22C6; ... &#x22C6;/
-	 DMX_TS_PES_TELETEXT,
-	 DMX_TS_PES_SUBTITLE,
-	 DMX_TS_PES_PCR,
-	 DMX_TS_PES_OTHER,
- } dmx_ts_pes_t;
-</programlisting>
-<para>describes the PES type for filters which write to a built-in decoder. The correspond (and
-should be kept identical) to the types in the demux device.
-</para>
-<programlisting>
- struct dmx_ts_feed_s {
-	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
-	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
-	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
-	 int (&#x22C6;set) (struct dmx_ts_feed_s&#x22C6; feed,
-		     __u16 pid,
-		     size_t callback_length,
-		     size_t circular_buffer_size,
-		     int descramble,
-		     struct timespec timeout);
-	 int (&#x22C6;start_filtering) (struct dmx_ts_feed_s&#x22C6; feed);
-	 int (&#x22C6;stop_filtering) (struct dmx_ts_feed_s&#x22C6; feed);
-	 int (&#x22C6;set_type) (struct dmx_ts_feed_s&#x22C6; feed,
-			  int type,
-			  dmx_ts_pes_t pes_type);
- };
-
- typedef struct dmx_ts_feed_s dmx_ts_feed_t;
-</programlisting>
- <programlisting>
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
- /&#x22C6; PES packet reception (not supported yet) &#x22C6;/
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
-
- typedef struct dmx_pes_filter_s {
-	 struct dmx_pes_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
-	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
- } dmx_pes_filter_t;
-</programlisting>
- <programlisting>
- typedef struct dmx_pes_feed_s {
-	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
-	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
-	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
-	 int (&#x22C6;set) (struct dmx_pes_feed_s&#x22C6; feed,
-		     __u16 pid,
-		     size_t circular_buffer_size,
-		     int descramble,
-		     struct timespec timeout);
-	 int (&#x22C6;start_filtering) (struct dmx_pes_feed_s&#x22C6; feed);
-	 int (&#x22C6;stop_filtering) (struct dmx_pes_feed_s&#x22C6; feed);
-	 int (&#x22C6;allocate_filter) (struct dmx_pes_feed_s&#x22C6; feed,
-				 dmx_pes_filter_t&#x22C6;&#x22C6; filter);
-	 int (&#x22C6;release_filter) (struct dmx_pes_feed_s&#x22C6; feed,
-				dmx_pes_filter_t&#x22C6; filter);
- } dmx_pes_feed_t;
-</programlisting>
- <programlisting>
- typedef struct {
-	 __u8 filter_value [DMX_MAX_FILTER_SIZE];
-	 __u8 filter_mask [DMX_MAX_FILTER_SIZE];
-	 struct dmx_section_feed_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
-	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
- } dmx_section_filter_t;
-</programlisting>
- <programlisting>
- struct dmx_section_feed_s {
-	 int is_filtering; /&#x22C6; Set to non-zero when filtering in progress &#x22C6;/
-	 struct dmx_demux_s&#x22C6; parent; /&#x22C6; Back-pointer &#x22C6;/
-	 void&#x22C6; priv; /&#x22C6; Pointer to private data of the API client &#x22C6;/
-	 int (&#x22C6;set) (struct dmx_section_feed_s&#x22C6; feed,
-		     __u16 pid,
-		     size_t circular_buffer_size,
-		     int descramble,
-		     int check_crc);
-	 int (&#x22C6;allocate_filter) (struct dmx_section_feed_s&#x22C6; feed,
-				 dmx_section_filter_t&#x22C6;&#x22C6; filter);
-	 int (&#x22C6;release_filter) (struct dmx_section_feed_s&#x22C6; feed,
-				dmx_section_filter_t&#x22C6; filter);
-	 int (&#x22C6;start_filtering) (struct dmx_section_feed_s&#x22C6; feed);
-	 int (&#x22C6;stop_filtering) (struct dmx_section_feed_s&#x22C6; feed);
- };
- typedef struct dmx_section_feed_s dmx_section_feed_t;
-
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
- /&#x22C6; Callback functions &#x22C6;/
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
-
- typedef int (&#x22C6;dmx_ts_cb) ( __u8 &#x22C6; buffer1,
-			    size_t buffer1_length,
-			    __u8 &#x22C6; buffer2,
-			    size_t buffer2_length,
-			    dmx_ts_feed_t&#x22C6; source)
-
- typedef int (&#x22C6;dmx_section_cb) ( __u8 &#x22C6; buffer1,
-				 size_t buffer1_len,
-				 __u8 &#x22C6; buffer2,
-				 size_t buffer2_len,
-				 dmx_section_filter_t &#x22C6; source);
-
- typedef int (&#x22C6;dmx_pes_cb) ( __u8 &#x22C6; buffer1,
-			     size_t buffer1_len,
-			     __u8 &#x22C6; buffer2,
-			     size_t buffer2_len,
-			     dmx_pes_filter_t&#x22C6; source);
-
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
- /&#x22C6; DVB Front-End &#x22C6;/
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
-
- typedef enum {
-	 DMX_MEMORY_FE,
-	 DMX_FRONTEND_0,
- } dmx_frontend_source;
-
- typedef struct {
-	 /&#x22C6; The following char&#x22C6; fields point to NULL terminated strings &#x22C6;/
-	 char&#x22C6; id;                    /&#x22C6; Unique front-end identifier &#x22C6;/
-	 char&#x22C6; vendor;                /&#x22C6; Name of the front-end vendor &#x22C6;/
-	 char&#x22C6; model;                 /&#x22C6; Name of the front-end model &#x22C6;/
-	 struct list_head connectivity_list; /&#x22C6; List of front-ends that can
-						be connected to a particular
-						demux &#x22C6;/
-	 void&#x22C6; priv;     /&#x22C6; Pointer to private data of the API client &#x22C6;/
-	 dmx_frontend_source source;
- } dmx_frontend_t;
-
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
- /&#x22C6; MPEG-2 TS Demux &#x22C6;/
- /&#x22C6;--------------------------------------------------------------------------&#x22C6;/
-
- /&#x22C6;
-  &#x22C6; Flags OR'ed in the capabilites field of struct dmx_demux_s.
-  &#x22C6;/
-
- #define DMX_TS_FILTERING                        1
- #define DMX_PES_FILTERING                       2
- #define DMX_SECTION_FILTERING                   4
- #define DMX_MEMORY_BASED_FILTERING              8    /&#x22C6; write() available &#x22C6;/
- #define DMX_CRC_CHECKING                        16
- #define DMX_TS_DESCRAMBLING                     32
- #define DMX_SECTION_PAYLOAD_DESCRAMBLING        64
- #define DMX_MAC_ADDRESS_DESCRAMBLING            128
-</programlisting>
-
-</section>
-<section id="demux_demux_t">
-<title>demux_demux_t</title>
- <programlisting>
- /&#x22C6;
-  &#x22C6; DMX_FE_ENTRY(): Casts elements in the list of registered
-  &#x22C6; front-ends from the generic type struct list_head
-  &#x22C6; to the type &#x22C6; dmx_frontend_t
-  &#x22C6;.
- &#x22C6;/
-</programlisting>
-
-</section>
-<section id="demux_directory">
-<title>Demux directory</title>
- <programlisting>
- /&#x22C6;
-  &#x22C6; DMX_DIR_ENTRY(): Casts elements in the list of registered
-  &#x22C6; demuxes from the generic type struct list_head&#x22C6; to the type dmx_demux_t
-  &#x22C6;.
-  &#x22C6;/
-
- #define DMX_DIR_ENTRY(list) list_entry(list, dmx_demux_t, reg_list)
-
- int dmx_register_demux (dmx_demux_t&#x22C6; demux);
- int dmx_unregister_demux (dmx_demux_t&#x22C6; demux);
- struct list_head&#x22C6; dmx_get_demuxes (void);
-</programlisting>
- </section></section>
-<section id="demux_directory_api">
-<title>Demux Directory API</title>
-<para>The demux directory is a Linux kernel-wide facility for registering and accessing the
-MPEG-2 TS demuxes in the system. Run-time registering and unregistering of demux drivers
-is possible using this API.
-</para>
-<para>All demux drivers in the directory implement the abstract interface dmx_demux_t.
-</para>
-
-<section
-role="subsection"><title>dmx_register_demux()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function makes a demux driver interface available to the Linux kernel. It is
- usually called by the init_module() function of the kernel module that contains
- the demux driver. The caller of this function is responsible for allocating
- dynamic or static memory for the demux structure and for initializing its fields
- before calling this function. The memory allocated for the demux structure
- must not be freed before calling dmx_unregister_demux(),</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int dmx_register_demux ( dmx_demux_t &#x22C6;demux )</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_demux_t*
- demux</para>
-</entry><entry
- align="char">
-<para>Pointer to the demux structure.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EEXIST</para>
-</entry><entry
- align="char">
-<para>A demux with the same value of the id field already stored
- in the directory.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENOSPC</para>
-</entry><entry
- align="char">
-<para>No space left in the directory.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>dmx_unregister_demux()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function is called to indicate that the given demux interface is no
- longer available. The caller of this function is responsible for freeing the
- memory of the demux structure, if it was dynamically allocated before calling
- dmx_register_demux(). The cleanup_module() function of the kernel module
- that contains the demux driver should call this function. Note that this function
- fails if the demux is currently in use, i.e., release_demux() has not been called
- for the interface.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int dmx_unregister_demux ( dmx_demux_t &#x22C6;demux )</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_demux_t*
- demux</para>
-</entry><entry
- align="char">
-<para>Pointer to the demux structure which is to be
- unregistered.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENODEV</para>
-</entry><entry
- align="char">
-<para>The specified demux is not registered in the demux
- directory.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EBUSY</para>
-</entry><entry
- align="char">
-<para>The specified demux is currently in use.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>dmx_get_demuxes()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>Provides the caller with the list of registered demux interfaces, using the
- standard list structure defined in the include file linux/list.h. The include file
- demux.h defines the macro DMX_DIR_ENTRY() for converting an element of
- the generic type struct list_head* to the type dmx_demux_t*. The caller must
- not free the memory of any of the elements obtained via this function call.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>struct list_head &#x22C6;dmx_get_demuxes ()</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>none</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>struct list_head *</para>
-</entry><entry
- align="char">
-<para>A list of demux interfaces, or NULL in the case of an
- empty list.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
- </section></section>
-<section id="demux_api">
-<title>Demux API</title>
-<para>The demux API should be implemented for each demux in the system. It is used to select
-the TS source of a demux and to manage the demux resources. When the demux
-client allocates a resource via the demux API, it receives a pointer to the API of that
-resource.
-</para>
-<para>Each demux receives its TS input from a DVB front-end or from memory, as set via the
-demux API. In a system with more than one front-end, the API can be used to select one of
-the DVB front-ends as a TS source for a demux, unless this is fixed in the HW platform. The
-demux API only controls front-ends regarding their connections with demuxes; the APIs
-used to set the other front-end parameters, such as tuning, are not defined in this
-document.
-</para>
-<para>The functions that implement the abstract interface demux should be defined static or
-module private and registered to the Demux Directory for external access. It is not necessary
-to implement every function in the demux_t struct, however (for example, a demux interface
-might support Section filtering, but not TS or PES filtering). The API client is expected to
-check the value of any function pointer before calling the function: the value of NULL means
-&#8220;function not available&#8221;.
-</para>
-<para>Whenever the functions of the demux API modify shared data, the possibilities of lost
-update and race condition problems should be addressed, e.g. by protecting parts of code with
-mutexes. This is especially important on multi-processor hosts.
-</para>
-<para>Note that functions called from a bottom half context must not sleep, at least in the 2.2.x
-kernels. Even a simple memory allocation can result in a kernel thread being put to sleep if
-swapping is needed. For example, the Linux kernel calls the functions of a network device
-interface from a bottom half context. Thus, if a demux API function is called from network
-device code, the function must not sleep.
-</para>
-
-</section>
-<section id="demux_callback_api">
-<title>Demux Callback API</title>
-<para>This kernel-space API comprises the callback functions that deliver filtered data to the
-demux client. Unlike the other APIs, these API functions are provided by the client and called
-from the demux code.
-</para>
-<para>The function pointers of this abstract interface are not packed into a structure as in the
-other demux APIs, because the callback functions are registered and used independent
-of each other. As an example, it is possible for the API client to provide several
-callback functions for receiving TS packets and no callbacks for PES packets or
-sections.
-</para>
-<para>The functions that implement the callback API need not be re-entrant: when a demux
-driver calls one of these functions, the driver is not allowed to call the function again before
-the original call returns. If a callback is triggered by a hardware interrupt, it is recommended
-to use the Linux &#8220;bottom half&#8221; mechanism or start a tasklet instead of making the callback
-function call directly from a hardware interrupt.
-</para>
-
-<section
-role="subsection"><title>dmx_ts_cb()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function, provided by the client of the demux API, is called from the
- demux code. The function is only called when filtering on this TS feed has
- been enabled using the start_filtering() function.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>Any TS packets that match the filter settings are copied to a circular buffer. The
- filtered TS packets are delivered to the client using this callback function. The
- size of the circular buffer is controlled by the circular_buffer_size parameter
- of the set() function in the TS Feed API. It is expected that the buffer1 and
- buffer2 callback parameters point to addresses within the circular buffer, but
- other implementations are also possible. Note that the called party should not
- try to free the memory the buffer1 and buffer2 parameters point to.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>When this function is called, the buffer1 parameter typically points to the
- start of the first undelivered TS packet within a circular buffer. The buffer2
- buffer parameter is normally NULL, except when the received TS packets have
- crossed the last address of the circular buffer and &#8221;wrapped&#8221; to the beginning
- of the buffer. In the latter case the buffer1 parameter would contain an address
- within the circular buffer, while the buffer2 parameter would contain the first
- address of the circular buffer.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>The number of bytes delivered with this function (i.e. buffer1_length +
- buffer2_length) is usually equal to the value of callback_length parameter
- given in the set() function, with one exception: if a timeout occurs before
- receiving callback_length bytes of TS data, any undelivered packets are
- immediately delivered to the client by calling this function. The timeout
- duration is controlled by the set() function in the TS Feed API.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>If a TS packet is received with errors that could not be fixed by the TS-level
- forward error correction (FEC), the Transport_error_indicator flag of the TS
- packet header should be set. The TS packet should not be discarded, as
- the error can possibly be corrected by a higher layer protocol. If the called
- party is slow in processing the callback, it is possible that the circular buffer
- eventually fills up. If this happens, the demux driver should discard any TS
- packets received while the buffer is full. The error should be indicated to the
- client on the next callback by setting the success parameter to the value of
- DMX_OVERRUN_ERROR.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>The type of data returned to the callback can be selected by the new
- function int (*set_type) (struct dmx_ts_feed_s* feed, int type, dmx_ts_pes_t
- pes_type) which is part of the dmx_ts_feed_s struct (also cf. to the
- include file ost/demux.h) The type parameter decides if the raw TS packet
- (TS_PACKET) or just the payload (TS_PACKET&#8212;TS_PAYLOAD_ONLY)
- should be returned. If additionally the TS_DECODER bit is set the stream
- will also be sent to the hardware MPEG decoder. In this case, the second
- flag decides as what kind of data the stream should be interpreted. The
- possible choices are one of DMX_TS_PES_AUDIO, DMX_TS_PES_VIDEO,
- DMX_TS_PES_TELETEXT, DMX_TS_PES_SUBTITLE,
- DMX_TS_PES_PCR, or DMX_TS_PES_OTHER.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int dmx_ts_cb(__u8&#x22C6; buffer1, size_t buffer1_length,
- __u8&#x22C6; buffer2, size_t buffer2_length, dmx_ts_feed_t&#x22C6;
- source);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>__u8* buffer1</para>
-</entry><entry
- align="char">
-<para>Pointer to the start of the filtered TS packets.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t buffer1_length</para>
-</entry><entry
- align="char">
-<para>Length of the TS data in buffer1.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>__u8* buffer2</para>
-</entry><entry
- align="char">
-<para>Pointer to the tail of the filtered TS packets, or NULL.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t buffer2_length</para>
-</entry><entry
- align="char">
-<para>Length of the TS data in buffer2.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>dmx_ts_feed_t*
- source</para>
-</entry><entry
- align="char">
-<para>Indicates which TS feed is the source of the callback.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>Continue filtering.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-1</para>
-</entry><entry
- align="char">
-<para>Stop filtering - has the same effect as a call to
- stop_filtering() on the TS Feed API.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>dmx_section_cb()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function, provided by the client of the demux API, is called from the
- demux code. The function is only called when filtering of sections has been
- enabled using the function start_filtering() of the section feed API. When the
- demux driver has received a complete section that matches at least one section
- filter, the client is notified via this callback function. Normally this function is
- called for each received section; however, it is also possible to deliver multiple
- sections with one callback, for example when the system load is high. If an
- error occurs while receiving a section, this function should be called with
- the corresponding error type set in the success field, whether or not there is
- data to deliver. The Section Feed implementation should maintain a circular
- buffer for received sections. However, this is not necessary if the Section Feed
- API is implemented as a client of the TS Feed API, because the TS Feed
- implementation then buffers the received data. The size of the circular buffer
- can be configured using the set() function in the Section Feed API. If there
- is no room in the circular buffer when a new section is received, the section
- must be discarded. If this happens, the value of the success parameter should
- be DMX_OVERRUN_ERROR on the next callback.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int dmx_section_cb(__u8&#x22C6; buffer1, size_t
- buffer1_length, __u8&#x22C6; buffer2, size_t
- buffer2_length, dmx_section_filter_t&#x22C6; source);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>__u8* buffer1</para>
-</entry><entry
- align="char">
-<para>Pointer to the start of the filtered section, e.g. within the
- circular buffer of the demux driver.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t buffer1_length</para>
-</entry><entry
- align="char">
-<para>Length of the filtered section data in buffer1, including
- headers and CRC.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>__u8* buffer2</para>
-</entry><entry
- align="char">
-<para>Pointer to the tail of the filtered section data, or NULL.
- Useful to handle the wrapping of a circular buffer.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t buffer2_length</para>
-</entry><entry
- align="char">
-<para>Length of the filtered section data in buffer2, including
- headers and CRC.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>dmx_section_filter_t*
- filter</para>
-</entry><entry
- align="char">
-<para>Indicates the filter that triggered the callback.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>Continue filtering.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-1</para>
-</entry><entry
- align="char">
-<para>Stop filtering - has the same effect as a call to
- stop_filtering() on the Section Feed API.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
- </section></section>
-<section id="ts_feed_api">
-<title>TS Feed API</title>
-<para>A TS feed is typically mapped to a hardware PID filter on the demux chip.
-Using this API, the client can set the filtering properties to start/stop filtering TS
-packets on a particular TS feed. The API is defined as an abstract interface of the type
-dmx_ts_feed_t.
-</para>
-<para>The functions that implement the interface should be defined static or module private. The
-client can get the handle of a TS feed API by calling the function allocate_ts_feed() in the
-demux API.
-</para>
-
-<section
-role="subsection"><title>set()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function sets the parameters of a TS feed. Any filtering in progress on the
- TS feed must be stopped before calling this function.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int set ( dmx_ts_feed_t&#x22C6; feed, __u16 pid, size_t
- callback_length, size_t circular_buffer_size, int
- descramble, struct timespec timeout);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_ts_feed_t* feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the TS feed API and instance data.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>__u16 pid</para>
-</entry><entry
- align="char">
-<para>PID value to filter. Only the TS packets carrying the
- specified PID will be passed to the API client.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t
- callback_length</para>
-</entry><entry
- align="char">
-<para>Number of bytes to deliver with each call to the
- dmx_ts_cb() callback function. The value of this
- parameter should be a multiple of 188.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t
- circular_buffer_size</para>
-</entry><entry
- align="char">
-<para>Size of the circular buffer for the filtered TS packets.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>int descramble</para>
-</entry><entry
- align="char">
-<para>If non-zero, descramble the filtered TS packets.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>struct timespec
- timeout</para>
-</entry><entry
- align="char">
-<para>Maximum time to wait before delivering received TS
- packets to the client.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENOMEM</para>
-</entry><entry
- align="char">
-<para>Not enough memory for the requested buffer size.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENOSYS</para>
-</entry><entry
- align="char">
-<para>No descrambling facility available for TS.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>start_filtering()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>Starts filtering TS packets on this TS feed, according to its settings. The PID
- value to filter can be set by the API client. All matching TS packets are
- delivered asynchronously to the client, using the callback function registered
- with allocate_ts_feed().</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int start_filtering(dmx_ts_feed_t&#x22C6; feed);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_ts_feed_t* feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the TS feed API and instance data.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>stop_filtering()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>Stops filtering TS packets on this TS feed.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int stop_filtering(dmx_ts_feed_t&#x22C6; feed);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_ts_feed_t* feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the TS feed API and instance data.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
- </section></section>
-<section id="section_feed_api">
-<title>Section Feed API</title>
-<para>A section feed is a resource consisting of a PID filter and a set of section filters. Using this
-API, the client can set the properties of a section feed and to start/stop filtering. The API is
-defined as an abstract interface of the type dmx_section_feed_t. The functions that implement
-the interface should be defined static or module private. The client can get the handle of
-a section feed API by calling the function allocate_section_feed() in the demux
-API.
-</para>
-<para>On demux platforms that provide section filtering in hardware, the Section Feed API
-implementation provides a software wrapper for the demux hardware. Other platforms may
-support only PID filtering in hardware, requiring that TS packets are converted to sections in
-software. In the latter case the Section Feed API implementation can be a client of the TS
-Feed API.
-</para>
-
-</section>
-<section id="kdapi_set">
-<title>set()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function sets the parameters of a section feed. Any filtering in progress on
- the section feed must be stopped before calling this function. If descrambling
- is enabled, the payload_scrambling_control and address_scrambling_control
- fields of received DVB datagram sections should be observed. If either one is
- non-zero, the section should be descrambled either in hardware or using the
- functions descramble_mac_address() and descramble_section_payload() of the
- demux API. Note that according to the MPEG-2 Systems specification, only
- the payloads of private sections can be scrambled while the rest of the section
- data must be sent in the clear.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int set(dmx_section_feed_t&#x22C6; feed, __u16 pid, size_t
- circular_buffer_size, int descramble, int
- check_crc);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_section_feed_t*
- feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the section feed API and instance data.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>__u16 pid</para>
-</entry><entry
- align="char">
-<para>PID value to filter; only the TS packets carrying the
- specified PID will be accepted.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>size_t
- circular_buffer_size</para>
-</entry><entry
- align="char">
-<para>Size of the circular buffer for filtered sections.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>int descramble</para>
-</entry><entry
- align="char">
-<para>If non-zero, descramble any sections that are scrambled.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>int check_crc</para>
-</entry><entry
- align="char">
-<para>If non-zero, check the CRC values of filtered sections.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENOMEM</para>
-</entry><entry
- align="char">
-<para>Not enough memory for the requested buffer size.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENOSYS</para>
-</entry><entry
- align="char">
-<para>No descrambling facility available for sections.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameters.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>allocate_filter()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function is used to allocate a section filter on the demux. It should only be
- called when no filtering is in progress on this section feed. If a filter cannot be
- allocated, the function fails with -ENOSPC. See in section ?? for the format of
- the section filter.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>The bitfields filter_mask and filter_value should only be modified when no
- filtering is in progress on this section feed. filter_mask controls which bits of
- filter_value are compared with the section headers/payload. On a binary value
- of 1 in filter_mask, the corresponding bits are compared. The filter only accepts
- sections that are equal to filter_value in all the tested bit positions. Any changes
- to the values of filter_mask and filter_value are guaranteed to take effect only
- when the start_filtering() function is called next time. The parent pointer in
- the struct is initialized by the API implementation to the value of the feed
- parameter. The priv pointer is not used by the API implementation, and can
- thus be freely utilized by the caller of this function. Any data pointed to by the
- priv pointer is available to the recipient of the dmx_section_cb() function call.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>While the maximum section filter length (DMX_MAX_FILTER_SIZE) is
- currently set at 16 bytes, hardware filters of that size are not available on all
- platforms. Therefore, section filtering will often take place first in hardware,
- followed by filtering in software for the header bytes that were not covered
- by a hardware filter. The filter_mask field can be checked to determine how
- many bytes of the section filter are actually used, and if the hardware filter will
- suffice. Additionally, software-only section filters can optionally be allocated
- to clients when all hardware section filters are in use. Note that on most demux
- hardware it is not possible to filter on the section_length field of the section
- header &#8211; thus this field is ignored, even though it is included in filter_value and
- filter_mask fields.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int allocate_filter(dmx_section_feed_t&#x22C6; feed,
- dmx_section_filter_t&#x22C6;&#x22C6; filter);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_section_feed_t*
- feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the section feed API and instance data.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>dmx_section_filter_t**
- filter</para>
-</entry><entry
- align="char">
-<para>Pointer to the allocated filter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENOSPC</para>
-</entry><entry
- align="char">
-<para>No filters of given type and length available.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameters.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>release_filter()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This function releases all the resources of a previously allocated section filter.
- The function should not be called while filtering is in progress on this section
- feed. After calling this function, the caller should not try to dereference the
- filter pointer.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int release_filter ( dmx_section_feed_t&#x22C6; feed,
- dmx_section_filter_t&#x22C6; filter);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_section_feed_t*
- feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the section feed API and instance data.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>dmx_section_filter_t*
- filter</para>
-</entry><entry
- align="char">
-<para>I/O Pointer to the instance data of a section filter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-ENODEV</para>
-</entry><entry
- align="char">
-<para>No such filter allocated.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>start_filtering()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>Starts filtering sections on this section feed, according to its settings. Sections
- are first filtered based on their PID and then matched with the section
- filters allocated for this feed. If the section matches the PID filter and
- at least one section filter, it is delivered to the API client. The section
- is delivered asynchronously using the callback function registered with
- allocate_section_feed().</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int start_filtering ( dmx_section_feed_t&#x22C6; feed );</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_section_feed_t*
- feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the section feed API and instance data.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section><section
-role="subsection"><title>stop_filtering()</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>Stops filtering sections on this section feed. Note that any changes to the
- filtering parameters (filter_value, filter_mask, etc.) should only be made when
- filtering is stopped.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int stop_filtering ( dmx_section_feed_t&#x22C6; feed );</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>dmx_section_feed_t*
- feed</para>
-</entry><entry
- align="char">
-<para>Pointer to the section feed API and instance data.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>RETURNS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>0</para>
-</entry><entry
- align="char">
-<para>The function was completed without errors.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>-EINVAL</para>
-</entry><entry
- align="char">
-<para>Bad parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-
-</section>