diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index b0bacdb..0f2c549 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -40,6 +40,7 @@
 	  dvo_ivch.o \
 	  dvo_tfp410.o \
 	  dvo_sil164.o \
+	  dvo_ns2501.o \
 	  i915_gem_dmabuf.o
 
 i915-$(CONFIG_COMPAT)   += i915_ioc32.o
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index 5891469..0c8ac4d 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -140,5 +140,6 @@
 extern struct intel_dvo_dev_ops ivch_ops;
 extern struct intel_dvo_dev_ops tfp410_ops;
 extern struct intel_dvo_dev_ops ch7017_ops;
+extern struct intel_dvo_dev_ops ns2501_ops;
 
 #endif /* _INTEL_DVO_H */
diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c
new file mode 100644
index 0000000..1a0bad9
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ns2501.c
@@ -0,0 +1,582 @@
+/*
+ *
+ * Copyright (c) 2012 Gilles Dartiguelongue, Thomas Richter
+ *
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "dvo.h"
+#include "i915_reg.h"
+#include "i915_drv.h"
+
+#define NS2501_VID 0x1305
+#define NS2501_DID 0x6726
+
+#define NS2501_VID_LO 0x00
+#define NS2501_VID_HI 0x01
+#define NS2501_DID_LO 0x02
+#define NS2501_DID_HI 0x03
+#define NS2501_REV 0x04
+#define NS2501_RSVD 0x05
+#define NS2501_FREQ_LO 0x06
+#define NS2501_FREQ_HI 0x07
+
+#define NS2501_REG8 0x08
+#define NS2501_8_VEN (1<<5)
+#define NS2501_8_HEN (1<<4)
+#define NS2501_8_DSEL (1<<3)
+#define NS2501_8_BPAS (1<<2)
+#define NS2501_8_RSVD (1<<1)
+#define NS2501_8_PD (1<<0)
+
+#define NS2501_REG9 0x09
+#define NS2501_9_VLOW (1<<7)
+#define NS2501_9_MSEL_MASK (0x7<<4)
+#define NS2501_9_TSEL (1<<3)
+#define NS2501_9_RSEN (1<<2)
+#define NS2501_9_RSVD (1<<1)
+#define NS2501_9_MDI (1<<0)
+
+#define NS2501_REGC 0x0c
+
+struct ns2501_priv {
+	//I2CDevRec d;
+	bool quiet;
+	int reg_8_shadow;
+	int reg_8_set;
+	// Shadow registers for i915
+	int dvoc;
+	int pll_a;
+	int srcdim;
+	int fw_blc;
+};
+
+#define NSPTR(d) ((NS2501Ptr)(d->DriverPrivate.ptr))
+
+/*
+ * Include the PLL launcher prototype
+ */
+extern void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe);
+
+/*
+ * For reasons unclear to me, the ns2501 at least on the Fujitsu/Siemens
+ * laptops does not react on the i2c bus unless
+ * both the PLL is running and the display is configured in its native
+ * resolution.
+ * This function forces the DVO on, and stores the registers it touches.
+ * Afterwards, registers are restored to regular values.
+ *
+ * This is pretty much a hack, though it works.
+ * Without that, ns2501_readb and ns2501_writeb fail
+ * when switching the resolution.
+ */
+
+static void enable_dvo(struct intel_dvo_device *dvo)
+{
+	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_gmbus *bus = container_of(adapter,
+					       struct intel_gmbus,
+					       adapter);
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+
+	DRM_DEBUG_KMS("%s: Trying to re-enable the DVO\n", __FUNCTION__);
+
+	ns->dvoc = I915_READ(DVO_C);
+	ns->pll_a = I915_READ(_DPLL_A);
+	ns->srcdim = I915_READ(DVOC_SRCDIM);
+	ns->fw_blc = I915_READ(FW_BLC);
+
+	I915_WRITE(DVOC, 0x10004084);
+	I915_WRITE(_DPLL_A, 0xd0820000);
+	I915_WRITE(DVOC_SRCDIM, 0x400300);	// 1024x768
+	I915_WRITE(FW_BLC, 0x1080304);
+
+	intel_enable_pll(dev_priv, 0);
+
+	I915_WRITE(DVOC, 0x90004084);
+}
+
+/*
+ * Restore the I915 registers modified by the above
+ * trigger function.
+ */
+static void restore_dvo(struct intel_dvo_device *dvo)
+{
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_gmbus *bus = container_of(adapter,
+					       struct intel_gmbus,
+					       adapter);
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
+
+	I915_WRITE(DVOC, ns->dvoc);
+	I915_WRITE(_DPLL_A, ns->pll_a);
+	I915_WRITE(DVOC_SRCDIM, ns->srcdim);
+	I915_WRITE(FW_BLC, ns->fw_blc);
+}
+
+/*
+** Read a register from the ns2501.
+** Returns true if successful, false otherwise.
+** If it returns false, it might be wise to enable the
+** DVO with the above function.
+*/
+static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, uint8_t * ch)
+{
+	struct ns2501_priv *ns = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+		 .addr = dvo->slave_addr,
+		 .flags = 0,
+		 .len = 1,
+		 .buf = out_buf,
+		 },
+		{
+		 .addr = dvo->slave_addr,
+		 .flags = I2C_M_RD,
+		 .len = 1,
+		 .buf = in_buf,
+		 }
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!ns->quiet) {
+		DRM_DEBUG_KMS
+		    ("Unable to read register 0x%02x from %s:0x%02x.\n", addr,
+		     adapter->name, dvo->slave_addr);
+	}
+
+	return false;
+}
+
+/*
+** Write a register to the ns2501.
+** Returns true if successful, false otherwise.
+** If it returns false, it might be wise to enable the
+** DVO with the above function.
+*/
+static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct ns2501_priv *ns = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	uint8_t out_buf[2];
+
+	struct i2c_msg msg = {
+		.addr = dvo->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(adapter, &msg, 1) == 1) {
+		return true;
+	}
+
+	if (!ns->quiet) {
+		DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n",
+			      addr, adapter->name, dvo->slave_addr);
+	}
+
+	return false;
+}
+
+/* National Semiconductor 2501 driver for chip on i2c bus
+ * scan for the chip on the bus.
+ * Hope the VBIOS initialized the PLL correctly so we can
+ * talk to it. If not, it will not be seen and not detected.
+ * Bummer!
+ */
+static bool ns2501_init(struct intel_dvo_device *dvo,
+			struct i2c_adapter *adapter)
+{
+	/* this will detect the NS2501 chip on the specified i2c bus */
+	struct ns2501_priv *ns;
+	unsigned char ch;
+
+	ns = kzalloc(sizeof(struct ns2501_priv), GFP_KERNEL);
+	if (ns == NULL)
+		return false;
+
+	dvo->i2c_bus = adapter;
+	dvo->dev_priv = ns;
+	ns->quiet = true;
+
+	if (!ns2501_readb(dvo, NS2501_VID_LO, &ch))
+		goto out;
+
+	if (ch != (NS2501_VID & 0xff)) {
+		DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n",
+			      ch, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+
+	if (!ns2501_readb(dvo, NS2501_DID_LO, &ch))
+		goto out;
+
+	if (ch != (NS2501_DID & 0xff)) {
+		DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n",
+			      ch, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+	ns->quiet = false;
+	ns->reg_8_set = 0;
+	ns->reg_8_shadow =
+	    NS2501_8_PD | NS2501_8_BPAS | NS2501_8_VEN | NS2501_8_HEN;
+
+	DRM_DEBUG_KMS("init ns2501 dvo controller successfully!\n");
+	return true;
+
+out:
+	kfree(ns);
+	return false;
+}
+
+static enum drm_connector_status ns2501_detect(struct intel_dvo_device *dvo)
+{
+	/*
+	 * This is a Laptop display, it doesn't have hotplugging.
+	 * Even if not, the detection bit of the 2501 is unreliable as
+	 * it only works for some display types.
+	 * It is even more unreliable as the PLL must be active for
+	 * allowing reading from the chiop.
+	 */
+	return connector_status_connected;
+}
+
+static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	DRM_DEBUG_KMS
+	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
+	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     mode->vtotal);
+
+	/*
+	 * Currently, these are all the modes I have data from.
+	 * More might exist. Unclear how to find the native resolution
+	 * of the panel in here so we could always accept it
+	 * by disabling the scaler.
+	 */
+	if ((mode->hdisplay == 800 && mode->vdisplay == 600) ||
+	    (mode->hdisplay == 640 && mode->vdisplay == 480) ||
+	    (mode->hdisplay == 1024 && mode->vdisplay == 768)) {
+		return MODE_OK;
+	} else {
+		return MODE_ONE_SIZE;	/* Is this a reasonable error? */
+	}
+}
+
+static void ns2501_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	bool ok;
+	bool restore = false;
+	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
+
+	DRM_DEBUG_KMS
+	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
+	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     mode->vtotal);
+
+	/*
+	 * Where do I find the native resolution for which scaling is not required???
+	 *
+	 * First trigger the DVO on as otherwise the chip does not appear on the i2c
+	 * bus.
+	 */
+	do {
+		ok = true;
+
+		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
+			/* mode 277 */
+			ns->reg_8_shadow &= ~NS2501_8_BPAS;
+			DRM_DEBUG_KMS("%s: switching to 800x600\n",
+				      __FUNCTION__);
+
+			/*
+			 * No, I do not know where this data comes from.
+			 * It is just what the video bios left in the DVO, so
+			 * I'm just copying it here over.
+			 * This also means that I cannot support any other modes
+			 * except the ones supported by the bios.
+			 */
+			ok &= ns2501_writeb(dvo, 0x11, 0xc8);	// 0xc7 also works.
+			ok &= ns2501_writeb(dvo, 0x1b, 0x19);
+			ok &= ns2501_writeb(dvo, 0x1c, 0x62);	// VBIOS left 0x64 here, but 0x62 works nicer
+			ok &= ns2501_writeb(dvo, 0x1d, 0x02);
+
+			ok &= ns2501_writeb(dvo, 0x34, 0x03);
+			ok &= ns2501_writeb(dvo, 0x35, 0xff);
+
+			ok &= ns2501_writeb(dvo, 0x80, 0x27);
+			ok &= ns2501_writeb(dvo, 0x81, 0x03);
+			ok &= ns2501_writeb(dvo, 0x82, 0x41);
+			ok &= ns2501_writeb(dvo, 0x83, 0x05);
+
+			ok &= ns2501_writeb(dvo, 0x8d, 0x02);
+			ok &= ns2501_writeb(dvo, 0x8e, 0x04);
+			ok &= ns2501_writeb(dvo, 0x8f, 0x00);
+
+			ok &= ns2501_writeb(dvo, 0x90, 0xfe);	/* vertical. VBIOS left 0xff here, but 0xfe works better */
+			ok &= ns2501_writeb(dvo, 0x91, 0x07);
+			ok &= ns2501_writeb(dvo, 0x94, 0x00);
+			ok &= ns2501_writeb(dvo, 0x95, 0x00);
+
+			ok &= ns2501_writeb(dvo, 0x96, 0x00);
+
+			ok &= ns2501_writeb(dvo, 0x99, 0x00);
+			ok &= ns2501_writeb(dvo, 0x9a, 0x88);
+
+			ok &= ns2501_writeb(dvo, 0x9c, 0x23);	/* Looks like first and last line of the image. */
+			ok &= ns2501_writeb(dvo, 0x9d, 0x00);
+			ok &= ns2501_writeb(dvo, 0x9e, 0x25);
+			ok &= ns2501_writeb(dvo, 0x9f, 0x03);
+
+			ok &= ns2501_writeb(dvo, 0xa4, 0x80);
+
+			ok &= ns2501_writeb(dvo, 0xb6, 0x00);
+
+			ok &= ns2501_writeb(dvo, 0xb9, 0xc8);	/* horizontal? */
+			ok &= ns2501_writeb(dvo, 0xba, 0x00);	/* horizontal? */
+
+			ok &= ns2501_writeb(dvo, 0xc0, 0x05);	/* horizontal? */
+			ok &= ns2501_writeb(dvo, 0xc1, 0xd7);
+
+			ok &= ns2501_writeb(dvo, 0xc2, 0x00);
+			ok &= ns2501_writeb(dvo, 0xc3, 0xf8);
+
+			ok &= ns2501_writeb(dvo, 0xc4, 0x03);
+			ok &= ns2501_writeb(dvo, 0xc5, 0x1a);
+
+			ok &= ns2501_writeb(dvo, 0xc6, 0x00);
+			ok &= ns2501_writeb(dvo, 0xc7, 0x73);
+			ok &= ns2501_writeb(dvo, 0xc8, 0x02);
+
+		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
+			/* mode 274 */
+			DRM_DEBUG_KMS("%s: switching to 640x480\n",
+				      __FUNCTION__);
+			/*
+			 * No, I do not know where this data comes from.
+			 * It is just what the video bios left in the DVO, so
+			 * I'm just copying it here over.
+			 * This also means that I cannot support any other modes
+			 * except the ones supported by the bios.
+			 */
+			ns->reg_8_shadow &= ~NS2501_8_BPAS;
+
+			ok &= ns2501_writeb(dvo, 0x11, 0xa0);
+			ok &= ns2501_writeb(dvo, 0x1b, 0x11);
+			ok &= ns2501_writeb(dvo, 0x1c, 0x54);
+			ok &= ns2501_writeb(dvo, 0x1d, 0x03);
+
+			ok &= ns2501_writeb(dvo, 0x34, 0x03);
+			ok &= ns2501_writeb(dvo, 0x35, 0xff);
+
+			ok &= ns2501_writeb(dvo, 0x80, 0xff);
+			ok &= ns2501_writeb(dvo, 0x81, 0x07);
+			ok &= ns2501_writeb(dvo, 0x82, 0x3d);
+			ok &= ns2501_writeb(dvo, 0x83, 0x05);
+
+			ok &= ns2501_writeb(dvo, 0x8d, 0x02);
+			ok &= ns2501_writeb(dvo, 0x8e, 0x10);
+			ok &= ns2501_writeb(dvo, 0x8f, 0x00);
+
+			ok &= ns2501_writeb(dvo, 0x90, 0xff);	/* vertical */
+			ok &= ns2501_writeb(dvo, 0x91, 0x07);
+			ok &= ns2501_writeb(dvo, 0x94, 0x00);
+			ok &= ns2501_writeb(dvo, 0x95, 0x00);
+
+			ok &= ns2501_writeb(dvo, 0x96, 0x05);
+
+			ok &= ns2501_writeb(dvo, 0x99, 0x00);
+			ok &= ns2501_writeb(dvo, 0x9a, 0x88);
+
+			ok &= ns2501_writeb(dvo, 0x9c, 0x24);
+			ok &= ns2501_writeb(dvo, 0x9d, 0x00);
+			ok &= ns2501_writeb(dvo, 0x9e, 0x25);
+			ok &= ns2501_writeb(dvo, 0x9f, 0x03);
+
+			ok &= ns2501_writeb(dvo, 0xa4, 0x84);
+
+			ok &= ns2501_writeb(dvo, 0xb6, 0x09);
+
+			ok &= ns2501_writeb(dvo, 0xb9, 0xa0);	/* horizontal? */
+			ok &= ns2501_writeb(dvo, 0xba, 0x00);	/* horizontal? */
+
+			ok &= ns2501_writeb(dvo, 0xc0, 0x05);	/* horizontal? */
+			ok &= ns2501_writeb(dvo, 0xc1, 0x90);
+
+			ok &= ns2501_writeb(dvo, 0xc2, 0x00);
+			ok &= ns2501_writeb(dvo, 0xc3, 0x0f);
+
+			ok &= ns2501_writeb(dvo, 0xc4, 0x03);
+			ok &= ns2501_writeb(dvo, 0xc5, 0x16);
+
+			ok &= ns2501_writeb(dvo, 0xc6, 0x00);
+			ok &= ns2501_writeb(dvo, 0xc7, 0x02);
+			ok &= ns2501_writeb(dvo, 0xc8, 0x02);
+
+		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
+			/* mode 280 */
+			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
+				      __FUNCTION__);
+			/*
+			 * This might or might not work, actually. I'm silently
+			 * assuming here that the native panel resolution is
+			 * 1024x768. If not, then this leaves the scaler disabled
+			 * generating a picture that is likely not the expected.
+			 *
+			 * Problem is that I do not know where to take the panel
+			 * dimensions from.
+			 *
+			 * Enable the bypass, scaling not required.
+			 *
+			 * The scaler registers are irrelevant here....
+			 *
+			 */
+			ns->reg_8_shadow |= NS2501_8_BPAS;
+			ok &= ns2501_writeb(dvo, 0x37, 0x44);
+		} else {
+			/*
+			 * Data not known. Bummer!
+			 * Hopefully, the code should not go here
+			 * as mode_OK delivered no other modes.
+			 */
+			ns->reg_8_shadow |= NS2501_8_BPAS;
+		}
+		ok &= ns2501_writeb(dvo, NS2501_REG8, ns->reg_8_shadow);
+
+		if (!ok) {
+			if (restore)
+				restore_dvo(dvo);
+			enable_dvo(dvo);
+			restore = true;
+		}
+	} while (!ok);
+	/*
+	 * Restore the old i915 registers before
+	 * forcing the ns2501 on.
+	 */
+	if (restore)
+		restore_dvo(dvo);
+}
+
+/* set the NS2501 power state */
+static void ns2501_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	bool ok;
+	bool restore = false;
+	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
+	unsigned char ch;
+
+	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %d\n",
+		      __FUNCTION__, mode);
+
+	ch = ns->reg_8_shadow;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		ch |= NS2501_8_PD;
+	else
+		ch &= ~NS2501_8_PD;
+
+	if (ns->reg_8_set == 0 || ns->reg_8_shadow != ch) {
+		ns->reg_8_set = 1;
+		ns->reg_8_shadow = ch;
+
+		do {
+			ok = true;
+			ok &= ns2501_writeb(dvo, NS2501_REG8, ch);
+			ok &=
+			    ns2501_writeb(dvo, 0x34,
+					  (mode ==
+					   DRM_MODE_DPMS_ON) ? (0x03) : (0x00));
+			ok &=
+			    ns2501_writeb(dvo, 0x35,
+					  (mode ==
+					   DRM_MODE_DPMS_ON) ? (0xff) : (0x00));
+			if (!ok) {
+				if (restore)
+					restore_dvo(dvo);
+				enable_dvo(dvo);
+				restore = true;
+			}
+		} while (!ok);
+
+		if (restore)
+			restore_dvo(dvo);
+	}
+}
+
+static void ns2501_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val;
+
+	ns2501_readb(dvo, NS2501_FREQ_LO, &val);
+	DRM_LOG_KMS("NS2501_FREQ_LO: 0x%02x\n", val);
+	ns2501_readb(dvo, NS2501_FREQ_HI, &val);
+	DRM_LOG_KMS("NS2501_FREQ_HI: 0x%02x\n", val);
+	ns2501_readb(dvo, NS2501_REG8, &val);
+	DRM_LOG_KMS("NS2501_REG8: 0x%02x\n", val);
+	ns2501_readb(dvo, NS2501_REG9, &val);
+	DRM_LOG_KMS("NS2501_REG9: 0x%02x\n", val);
+	ns2501_readb(dvo, NS2501_REGC, &val);
+	DRM_LOG_KMS("NS2501_REGC: 0x%02x\n", val);
+}
+
+static void ns2501_destroy(struct intel_dvo_device *dvo)
+{
+	struct ns2501_priv *ns = dvo->dev_priv;
+
+	if (ns) {
+		kfree(ns);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ns2501_ops = {
+	.init = ns2501_init,
+	.detect = ns2501_detect,
+	.mode_valid = ns2501_mode_valid,
+	.mode_set = ns2501_mode_set,
+	.dpms = ns2501_dpms,
+	.dump_regs = ns2501_dump_regs,
+	.destroy = ns2501_destroy,
+};
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 359f6e8..a18e936 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -44,7 +44,6 @@
 
 enum {
 	ACTIVE_LIST,
-	FLUSHING_LIST,
 	INACTIVE_LIST,
 	PINNED_LIST,
 };
@@ -62,28 +61,11 @@
 
 	seq_printf(m, "gen: %d\n", info->gen);
 	seq_printf(m, "pch: %d\n", INTEL_PCH_TYPE(dev));
-#define B(x) seq_printf(m, #x ": %s\n", yesno(info->x))
-	B(is_mobile);
-	B(is_i85x);
-	B(is_i915g);
-	B(is_i945gm);
-	B(is_g33);
-	B(need_gfx_hws);
-	B(is_g4x);
-	B(is_pineview);
-	B(is_broadwater);
-	B(is_crestline);
-	B(has_fbc);
-	B(has_pipe_cxsr);
-	B(has_hotplug);
-	B(cursor_needs_physical);
-	B(has_overlay);
-	B(overlay_needs_physical);
-	B(supports_tv);
-	B(has_bsd_ring);
-	B(has_blt_ring);
-	B(has_llc);
-#undef B
+#define DEV_INFO_FLAG(x) seq_printf(m, #x ": %s\n", yesno(info->x))
+#define DEV_INFO_SEP ;
+	DEV_INFO_FLAGS;
+#undef DEV_INFO_FLAG
+#undef DEV_INFO_SEP
 
 	return 0;
 }
@@ -121,14 +103,15 @@
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-	seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s",
+	seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d %d%s%s%s",
 		   &obj->base,
 		   get_pin_flag(obj),
 		   get_tiling_flag(obj),
 		   obj->base.size / 1024,
 		   obj->base.read_domains,
 		   obj->base.write_domain,
-		   obj->last_rendering_seqno,
+		   obj->last_read_seqno,
+		   obj->last_write_seqno,
 		   obj->last_fenced_seqno,
 		   cache_level_str(obj->cache_level),
 		   obj->dirty ? " dirty" : "",
@@ -177,10 +160,6 @@
 		seq_printf(m, "Inactive:\n");
 		head = &dev_priv->mm.inactive_list;
 		break;
-	case FLUSHING_LIST:
-		seq_printf(m, "Flushing:\n");
-		head = &dev_priv->mm.flushing_list;
-		break;
 	default:
 		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
@@ -238,7 +217,6 @@
 
 	size = count = mappable_size = mappable_count = 0;
 	count_objects(&dev_priv->mm.active_list, mm_list);
-	count_objects(&dev_priv->mm.flushing_list, mm_list);
 	seq_printf(m, "  %u [%u] active objects, %zu [%zu] bytes\n",
 		   count, mappable_count, size, mappable_size);
 
@@ -413,7 +391,7 @@
 {
 	if (ring->get_seqno) {
 		seq_printf(m, "Current sequence (%s): %d\n",
-			   ring->name, ring->get_seqno(ring));
+			   ring->name, ring->get_seqno(ring, false));
 	}
 }
 
@@ -630,12 +608,12 @@
 	seq_printf(m, "%s [%d]:\n", name, count);
 
 	while (count--) {
-		seq_printf(m, "  %08x %8u %04x %04x %08x%s%s%s%s%s%s%s",
+		seq_printf(m, "  %08x %8u %04x %04x %x %x%s%s%s%s%s%s%s",
 			   err->gtt_offset,
 			   err->size,
 			   err->read_domains,
 			   err->write_domain,
-			   err->seqno,
+			   err->rseqno, err->wseqno,
 			   pin_flag(err->pinned),
 			   tiling_flag(err->tiling),
 			   dirty_flag(err->dirty),
@@ -799,10 +777,14 @@
 	struct seq_file *m = filp->private_data;
 	struct i915_error_state_file_priv *error_priv = m->private;
 	struct drm_device *dev = error_priv->dev;
+	int ret;
 
 	DRM_DEBUG_DRIVER("Resetting error state\n");
 
-	mutex_lock(&dev->struct_mutex);
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	i915_destroy_error_state(dev);
 	mutex_unlock(&dev->struct_mutex);
 
@@ -1292,7 +1274,8 @@
 
 	seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\n");
 
-	for (gpu_freq = dev_priv->min_delay; gpu_freq <= dev_priv->max_delay;
+	for (gpu_freq = dev_priv->rps.min_delay;
+	     gpu_freq <= dev_priv->rps.max_delay;
 	     gpu_freq++) {
 		I915_WRITE(GEN6_PCODE_DATA, gpu_freq);
 		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
@@ -1472,8 +1455,12 @@
 	struct drm_info_node *node = (struct drm_info_node *) m->private;
 	struct drm_device *dev = node->minor->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
 
-	mutex_lock(&dev->struct_mutex);
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	seq_printf(m, "bit6 swizzle for X-tiling = %s\n",
 		   swizzle_string(dev_priv->mm.bit_6_swizzle_x));
 	seq_printf(m, "bit6 swizzle for Y-tiling = %s\n",
@@ -1674,7 +1661,7 @@
 	struct drm_device *dev = filp->private_data;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	char buf[20];
-	int val = 0;
+	int val = 0, ret;
 
 	if (cnt > 0) {
 		if (cnt > sizeof(buf) - 1)
@@ -1689,7 +1676,10 @@
 
 	DRM_DEBUG_DRIVER("Stopping rings 0x%08x\n", val);
 
-	mutex_lock(&dev->struct_mutex);
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	dev_priv->stop_rings = val;
 	mutex_unlock(&dev->struct_mutex);
 
@@ -1713,10 +1703,18 @@
 	struct drm_device *dev = filp->private_data;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	char buf[80];
-	int len;
+	int len, ret;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	len = snprintf(buf, sizeof(buf),
-		       "max freq: %d\n", dev_priv->max_delay * 50);
+		       "max freq: %d\n", dev_priv->rps.max_delay * 50);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (len > sizeof(buf))
 		len = sizeof(buf);
@@ -1733,7 +1731,10 @@
 	struct drm_device *dev = filp->private_data;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	char buf[20];
-	int val = 1;
+	int val = 1, ret;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
 
 	if (cnt > 0) {
 		if (cnt > sizeof(buf) - 1)
@@ -1748,12 +1749,17 @@
 
 	DRM_DEBUG_DRIVER("Manually setting max freq to %d\n", val);
 
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	/*
 	 * Turbo will still be enabled, but won't go above the set value.
 	 */
-	dev_priv->max_delay = val / 50;
+	dev_priv->rps.max_delay = val / 50;
 
 	gen6_set_rps(dev, val / 50);
+	mutex_unlock(&dev->struct_mutex);
 
 	return cnt;
 }
@@ -1773,10 +1779,18 @@
 	struct drm_device *dev = filp->private_data;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	char buf[80];
-	int len;
+	int len, ret;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
 
 	len = snprintf(buf, sizeof(buf),
-		       "min freq: %d\n", dev_priv->min_delay * 50);
+		       "min freq: %d\n", dev_priv->rps.min_delay * 50);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (len > sizeof(buf))
 		len = sizeof(buf);
@@ -1791,7 +1805,10 @@
 	struct drm_device *dev = filp->private_data;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	char buf[20];
-	int val = 1;
+	int val = 1, ret;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
 
 	if (cnt > 0) {
 		if (cnt > sizeof(buf) - 1)
@@ -1806,12 +1823,17 @@
 
 	DRM_DEBUG_DRIVER("Manually setting min freq to %d\n", val);
 
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	/*
 	 * Turbo will still be enabled, but won't go below the set value.
 	 */
-	dev_priv->min_delay = val / 50;
+	dev_priv->rps.min_delay = val / 50;
 
 	gen6_set_rps(dev, val / 50);
+	mutex_unlock(&dev->struct_mutex);
 
 	return cnt;
 }
@@ -1834,9 +1856,15 @@
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	char buf[80];
 	u32 snpcr;
-	int len;
+	int len, ret;
 
-	mutex_lock(&dev_priv->dev->struct_mutex);
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
 	snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
 	mutex_unlock(&dev_priv->dev->struct_mutex);
 
@@ -1862,6 +1890,9 @@
 	u32 snpcr;
 	int val = 1;
 
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
+
 	if (cnt > 0) {
 		if (cnt > sizeof(buf) - 1)
 			return -EINVAL;
@@ -1925,16 +1956,11 @@
 {
 	struct drm_device *dev = inode->i_private;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
 
 	if (INTEL_INFO(dev)->gen < 6)
 		return 0;
 
-	ret = mutex_lock_interruptible(&dev->struct_mutex);
-	if (ret)
-		return ret;
 	gen6_gt_force_wake_get(dev_priv);
-	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
 }
@@ -1947,16 +1973,7 @@
 	if (INTEL_INFO(dev)->gen < 6)
 		return 0;
 
-	/*
-	 * It's bad that we can potentially hang userspace if struct_mutex gets
-	 * forever stuck.  However, if we cannot acquire this lock it means that
-	 * almost certainly the driver has hung, is not unload-able. Therefore
-	 * hanging here is probably a minor inconvenience not to be seen my
-	 * almost every user.
-	 */
-	mutex_lock(&dev->struct_mutex);
 	gen6_gt_force_wake_put(dev_priv);
-	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
 }
@@ -2006,7 +2023,6 @@
 	{"i915_gem_gtt", i915_gem_gtt_info, 0},
 	{"i915_gem_pinned", i915_gem_gtt_info, 0, (void *) PINNED_LIST},
 	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
-	{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
 	{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
 	{"i915_gem_pageflip", i915_gem_pageflip_info, 0},
 	{"i915_gem_request", i915_gem_request_info, 0},
@@ -2067,6 +2083,7 @@
 				  &i915_cache_sharing_fops);
 	if (ret)
 		return ret;
+
 	ret = i915_debugfs_create(minor->debugfs_root, minor,
 				  "i915_ring_stop",
 				  &i915_ring_stop_fops);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 9cf7dfe..0a1b64f 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1009,6 +1009,9 @@
 	case I915_PARAM_HAS_WAIT_TIMEOUT:
 		value = 1;
 		break;
+	case I915_PARAM_HAS_SEMAPHORES:
+		value = i915_semaphore_is_enabled(dev);
+		break;
 	default:
 		DRM_DEBUG_DRIVER("Unknown parameter %d\n",
 				 param->param);
@@ -1425,6 +1428,21 @@
 	kfree(ap);
 }
 
+static void i915_dump_device_info(struct drm_i915_private *dev_priv)
+{
+	const struct intel_device_info *info = dev_priv->info;
+
+#define DEV_INFO_FLAG(name) info->name ? #name "," : ""
+#define DEV_INFO_SEP ,
+	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x flags="
+			 "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+			 info->gen,
+			 dev_priv->dev->pdev->device,
+			 DEV_INFO_FLAGS);
+#undef DEV_INFO_FLAG
+#undef DEV_INFO_SEP
+}
+
 /**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
@@ -1449,7 +1467,6 @@
 	if (info->gen >= 6 && !drm_core_check_feature(dev, DRIVER_MODESET))
 		return -ENODEV;
 
-
 	/* i915 has 4 more counters */
 	dev->counters += 4;
 	dev->types[6] = _DRM_STAT_IRQ;
@@ -1465,6 +1482,8 @@
 	dev_priv->dev = dev;
 	dev_priv->info = info;
 
+	i915_dump_device_info(dev_priv);
+
 	if (i915_get_bridge_dev(dev)) {
 		ret = -EIO;
 		goto free_priv;
@@ -1586,7 +1605,7 @@
 
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->error_lock);
-	spin_lock_init(&dev_priv->rps_lock);
+	spin_lock_init(&dev_priv->rps.lock);
 
 	if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
 		dev_priv->num_pipe = 3;
@@ -1835,6 +1854,8 @@
 	DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHEING, i915_gem_set_cacheing_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHEING, i915_gem_get_cacheing_ioctl, DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
@@ -1857,6 +1878,7 @@
 	DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_UNLOCKED),
 	DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_UNLOCKED),
 };
 
 int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index a24ffbe..7ebb13b 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1060,7 +1060,7 @@
 	 * This should make it easier to transition modules over to the
 	 * new register block scheme, since we can do it incrementally.
 	 */
-	if (reg >= 0x180000)
+	if (reg >= VLV_DISPLAY_BASE)
 		return false;
 
 	if (reg >= RENDER_RING_BASE &&
@@ -1180,3 +1180,49 @@
 __i915_write(32, l)
 __i915_write(64, q)
 #undef __i915_write
+
+static const struct register_whitelist {
+	uint64_t offset;
+	uint32_t size;
+	uint32_t gen_bitmask; /* support gens, 0x10 for 4, 0x30 for 4 and 5, etc. */
+} whitelist[] = {
+	{ RING_TIMESTAMP(RENDER_RING_BASE), 8, 0xF0 },
+};
+
+int i915_reg_read_ioctl(struct drm_device *dev,
+			void *data, struct drm_file *file)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_reg_read *reg = data;
+	struct register_whitelist const *entry = whitelist;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(whitelist); i++, entry++) {
+		if (entry->offset == reg->offset &&
+		    (1 << INTEL_INFO(dev)->gen & entry->gen_bitmask))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(whitelist))
+		return -EINVAL;
+
+	switch (entry->size) {
+	case 8:
+		reg->val = I915_READ64(reg->offset);
+		break;
+	case 4:
+		reg->val = I915_READ(reg->offset);
+		break;
+	case 2:
+		reg->val = I915_READ16(reg->offset);
+		break;
+	case 1:
+		reg->val = I915_READ8(reg->offset);
+		break;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 627fe35..261fe21 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -109,6 +109,7 @@
 
 #define WATCH_COHERENCY	0
 #define WATCH_LISTS	0
+#define WATCH_GTT	0
 
 #define I915_GEM_PHYS_CURSOR_0 1
 #define I915_GEM_PHYS_CURSOR_1 2
@@ -221,7 +222,7 @@
 	struct drm_i915_error_buffer {
 		u32 size;
 		u32 name;
-		u32 seqno;
+		u32 rseqno, wseqno;
 		u32 gtt_offset;
 		u32 read_domains;
 		u32 write_domain;
@@ -248,7 +249,6 @@
 	void (*update_wm)(struct drm_device *dev);
 	void (*update_sprite_wm)(struct drm_device *dev, int pipe,
 				 uint32_t sprite_width, int pixel_size);
-	void (*sanitize_pm)(struct drm_device *dev);
 	void (*update_linetime_wm)(struct drm_device *dev, int pipe,
 				 struct drm_display_mode *mode);
 	int (*crtc_mode_set)(struct drm_crtc *crtc,
@@ -279,6 +279,32 @@
 	void (*force_wake_put)(struct drm_i915_private *dev_priv);
 };
 
+#define DEV_INFO_FLAGS \
+	DEV_INFO_FLAG(is_mobile) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_i85x) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_i915g) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_i945gm) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_g33) DEV_INFO_SEP \
+	DEV_INFO_FLAG(need_gfx_hws) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_g4x) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_pineview) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_broadwater) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_crestline) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_ivybridge) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_valleyview) DEV_INFO_SEP \
+	DEV_INFO_FLAG(is_haswell) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_force_wake) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_fbc) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_pipe_cxsr) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_hotplug) DEV_INFO_SEP \
+	DEV_INFO_FLAG(cursor_needs_physical) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_overlay) DEV_INFO_SEP \
+	DEV_INFO_FLAG(overlay_needs_physical) DEV_INFO_SEP \
+	DEV_INFO_FLAG(supports_tv) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_bsd_ring) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_blt_ring) DEV_INFO_SEP \
+	DEV_INFO_FLAG(has_llc)
+
 struct intel_device_info {
 	u8 gen;
 	u8 is_mobile:1;
@@ -696,17 +722,6 @@
 		struct list_head active_list;
 
 		/**
-		 * List of objects which are not in the ringbuffer but which
-		 * still have a write_domain which needs to be flushed before
-		 * unbinding.
-		 *
-		 * last_rendering_seqno is 0 while an object is in this list.
-		 *
-		 * A reference is held on the buffer while on this list.
-		 */
-		struct list_head flushing_list;
-
-		/**
 		 * LRU list of objects which are not in the ringbuffer and
 		 * are ready to unbind, but are still in the GTT.
 		 *
@@ -796,9 +811,6 @@
 	bool lvds_downclock_avail;
 	/* indicates the reduced downclock for LVDS*/
 	int lvds_downclock;
-	struct work_struct idle_work;
-	struct timer_list idle_timer;
-	bool busy;
 	u16 orig_clock;
 	int child_dev_num;
 	struct child_device_config *child_dev;
@@ -807,9 +819,21 @@
 
 	bool mchbar_need_disable;
 
-	struct work_struct rps_work;
-	spinlock_t rps_lock;
-	u32 pm_iir;
+	/* gen6+ rps state */
+	struct {
+		struct work_struct work;
+		u32 pm_iir;
+		/* lock - irqsave spinlock that protectects the work_struct and
+		 * pm_iir. */
+		spinlock_t lock;
+
+		/* The below variables an all the rps hw state are protected by
+		 * dev->struct mutext. */
+		u8 cur_delay;
+		u8 min_delay;
+		u8 max_delay;
+	} rps;
+
 
 	u8 cur_delay;
 	u8 min_delay;
@@ -826,7 +850,6 @@
 	int c_m;
 	int r_t;
 	u8 corr;
-	spinlock_t *mchdev_lock;
 
 	enum no_fbc_reason no_fbc_reason;
 
@@ -861,9 +884,9 @@
 };
 
 enum i915_cache_level {
-	I915_CACHE_NONE,
+	I915_CACHE_NONE = 0,
 	I915_CACHE_LLC,
-	I915_CACHE_LLC_MLC, /* gen6+ */
+	I915_CACHE_LLC_MLC, /* gen6+, in docs at least! */
 };
 
 struct drm_i915_gem_object {
@@ -873,18 +896,16 @@
 	struct drm_mm_node *gtt_space;
 	struct list_head gtt_list;
 
-	/** This object's place on the active/flushing/inactive lists */
+	/** This object's place on the active/inactive lists */
 	struct list_head ring_list;
 	struct list_head mm_list;
-	/** This object's place on GPU write list */
-	struct list_head gpu_write_list;
 	/** This object's place in the batchbuffer or on the eviction list */
 	struct list_head exec_list;
 
 	/**
-	 * This is set if the object is on the active or flushing lists
-	 * (has pending rendering), and is not set if it's on inactive (ready
-	 * to be unbound).
+	 * This is set if the object is on the active lists (has pending
+	 * rendering and so a non-zero seqno), and is not set if it i s on
+	 * inactive (ready to be unbound) list.
 	 */
 	unsigned int active:1;
 
@@ -895,12 +916,6 @@
 	unsigned int dirty:1;
 
 	/**
-	 * This is set if the object has been written to since the last
-	 * GPU flush.
-	 */
-	unsigned int pending_gpu_write:1;
-
-	/**
 	 * Fence register bits (if any) for this object.  Will be set
 	 * as needed when mapped into the GTT.
 	 * Protected by dev->struct_mutex.
@@ -992,7 +1007,8 @@
 	struct intel_ring_buffer *ring;
 
 	/** Breadcrumb of last rendering to the buffer. */
-	uint32_t last_rendering_seqno;
+	uint32_t last_read_seqno;
+	uint32_t last_write_seqno;
 	/** Breadcrumb of last fenced GPU access to the buffer. */
 	uint32_t last_fenced_seqno;
 
@@ -1135,6 +1151,8 @@
 
 #define HAS_FORCE_WAKE(dev) (INTEL_INFO(dev)->has_force_wake)
 
+#define HAS_L3_GPU_CACHE(dev) (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
+
 #include "i915_trace.h"
 
 /**
@@ -1256,6 +1274,10 @@
 			 struct drm_file *file_priv);
 int i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file_priv);
+int i915_gem_get_cacheing_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file);
+int i915_gem_set_cacheing_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file);
 int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
 			    struct drm_file *file_priv);
 int i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
@@ -1274,9 +1296,6 @@
 			struct drm_file *file_priv);
 void i915_gem_load(struct drm_device *dev);
 int i915_gem_init_object(struct drm_gem_object *obj);
-int __must_check i915_gem_flush_ring(struct intel_ring_buffer *ring,
-				     uint32_t invalidate_domains,
-				     uint32_t flush_domains);
 struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 						  size_t size);
 void i915_gem_free_object(struct drm_gem_object *obj);
@@ -1291,7 +1310,6 @@
 int i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj,
 				  gfp_t gfpmask);
 int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
-int __must_check i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj);
 int i915_gem_object_sync(struct drm_i915_gem_object *obj,
 			 struct intel_ring_buffer *to);
 void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
@@ -1358,9 +1376,9 @@
 void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
 int __must_check i915_gpu_idle(struct drm_device *dev);
 int __must_check i915_gem_idle(struct drm_device *dev);
-int __must_check i915_add_request(struct intel_ring_buffer *ring,
-				  struct drm_file *file,
-				  struct drm_i915_gem_request *request);
+int i915_add_request(struct intel_ring_buffer *ring,
+		     struct drm_file *file,
+		     struct drm_i915_gem_request *request);
 int __must_check i915_wait_seqno(struct intel_ring_buffer *ring,
 				 uint32_t seqno);
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
@@ -1429,7 +1447,9 @@
 
 /* i915_gem_evict.c */
 int __must_check i915_gem_evict_something(struct drm_device *dev, int min_size,
-					  unsigned alignment, bool mappable);
+					  unsigned alignment,
+					  unsigned cache_level,
+					  bool mappable);
 int i915_gem_evict_everything(struct drm_device *dev, bool purgeable_only);
 
 /* i915_gem_stolen.c */
@@ -1529,6 +1549,8 @@
 extern int intel_enable_rc6(const struct drm_device *dev);
 
 extern bool i915_semaphore_is_enabled(struct drm_device *dev);
+int i915_reg_read_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file);
 
 /* overlay */
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5c4657a..0514593 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -37,7 +37,6 @@
 #include <linux/pci.h>
 #include <linux/dma-buf.h>
 
-static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
 static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
 static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
 static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
@@ -1441,7 +1440,7 @@
 	list_move_tail(&obj->mm_list, &dev_priv->mm.active_list);
 	list_move_tail(&obj->ring_list, &ring->active_list);
 
-	obj->last_rendering_seqno = seqno;
+	obj->last_read_seqno = seqno;
 
 	if (obj->fenced_gpu_access) {
 		obj->last_fenced_seqno = seqno;
@@ -1458,42 +1457,30 @@
 }
 
 static void
-i915_gem_object_move_off_active(struct drm_i915_gem_object *obj)
-{
-	list_del_init(&obj->ring_list);
-	obj->last_rendering_seqno = 0;
-	obj->last_fenced_seqno = 0;
-}
-
-static void
-i915_gem_object_move_to_flushing(struct drm_i915_gem_object *obj)
-{
-	struct drm_device *dev = obj->base.dev;
-	drm_i915_private_t *dev_priv = dev->dev_private;
-
-	BUG_ON(!obj->active);
-	list_move_tail(&obj->mm_list, &dev_priv->mm.flushing_list);
-
-	i915_gem_object_move_off_active(obj);
-}
-
-static void
 i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
 {
 	struct drm_device *dev = obj->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	BUG_ON(obj->base.write_domain & ~I915_GEM_GPU_DOMAINS);
+	BUG_ON(!obj->active);
+
+	if (obj->pin_count) /* are we a framebuffer? */
+		intel_mark_fb_idle(obj);
+
 	list_move_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
 
-	BUG_ON(!list_empty(&obj->gpu_write_list));
-	BUG_ON(!obj->active);
+	list_del_init(&obj->ring_list);
 	obj->ring = NULL;
 
-	i915_gem_object_move_off_active(obj);
+	obj->last_read_seqno = 0;
+	obj->last_write_seqno = 0;
+	obj->base.write_domain = 0;
+
+	obj->last_fenced_seqno = 0;
 	obj->fenced_gpu_access = false;
 
 	obj->active = 0;
-	obj->pending_gpu_write = false;
 	drm_gem_object_unreference(&obj->base);
 
 	WARN_ON(i915_verify_lists(dev));
@@ -1525,30 +1512,6 @@
 	return obj->madv == I915_MADV_DONTNEED;
 }
 
-static void
-i915_gem_process_flushing_list(struct intel_ring_buffer *ring,
-			       uint32_t flush_domains)
-{
-	struct drm_i915_gem_object *obj, *next;
-
-	list_for_each_entry_safe(obj, next,
-				 &ring->gpu_write_list,
-				 gpu_write_list) {
-		if (obj->base.write_domain & flush_domains) {
-			uint32_t old_write_domain = obj->base.write_domain;
-
-			obj->base.write_domain = 0;
-			list_del_init(&obj->gpu_write_list);
-			i915_gem_object_move_to_active(obj, ring,
-						       i915_gem_next_request_seqno(ring));
-
-			trace_i915_gem_object_change_domain(obj,
-							    obj->base.read_domains,
-							    old_write_domain);
-		}
-	}
-}
-
 static u32
 i915_gem_get_seqno(struct drm_device *dev)
 {
@@ -1589,15 +1552,16 @@
 	 * is that the flush _must_ happen before the next request, no matter
 	 * what.
 	 */
-	if (ring->gpu_caches_dirty) {
-		ret = i915_gem_flush_ring(ring, 0, I915_GEM_GPU_DOMAINS);
-		if (ret)
-			return ret;
+	ret = intel_ring_flush_all_caches(ring);
+	if (ret)
+		return ret;
 
-		ring->gpu_caches_dirty = false;
+	if (request == NULL) {
+		request = kmalloc(sizeof(*request), GFP_KERNEL);
+		if (request == NULL)
+			return -ENOMEM;
 	}
 
-	BUG_ON(request == NULL);
 	seqno = i915_gem_next_request_seqno(ring);
 
 	/* Record the position of the start of the request so that
@@ -1608,8 +1572,10 @@
 	request_ring_position = intel_ring_get_tail(ring);
 
 	ret = ring->add_request(ring, &seqno);
-	if (ret)
-	    return ret;
+	if (ret) {
+		kfree(request);
+		return ret;
+	}
 
 	trace_i915_gem_request_add(ring, seqno);
 
@@ -1619,6 +1585,7 @@
 	request->emitted_jiffies = jiffies;
 	was_empty = list_empty(&ring->request_list);
 	list_add_tail(&request->list, &ring->request_list);
+	request->file_priv = NULL;
 
 	if (file) {
 		struct drm_i915_file_private *file_priv = file->driver_priv;
@@ -1638,13 +1605,13 @@
 				  jiffies +
 				  msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
 		}
-		if (was_empty)
+		if (was_empty) {
 			queue_delayed_work(dev_priv->wq,
 					   &dev_priv->mm.retire_work, HZ);
+			intel_mark_busy(dev_priv->dev);
+		}
 	}
 
-	WARN_ON(!list_empty(&ring->gpu_write_list));
-
 	return 0;
 }
 
@@ -1686,8 +1653,6 @@
 				       struct drm_i915_gem_object,
 				       ring_list);
 
-		obj->base.write_domain = 0;
-		list_del_init(&obj->gpu_write_list);
 		i915_gem_object_move_to_inactive(obj);
 	}
 }
@@ -1723,20 +1688,6 @@
 	for_each_ring(ring, dev_priv, i)
 		i915_gem_reset_ring_lists(dev_priv, ring);
 
-	/* Remove anything from the flushing lists. The GPU cache is likely
-	 * to be lost on reset along with the data, so simply move the
-	 * lost bo to the inactive list.
-	 */
-	while (!list_empty(&dev_priv->mm.flushing_list)) {
-		obj = list_first_entry(&dev_priv->mm.flushing_list,
-				      struct drm_i915_gem_object,
-				      mm_list);
-
-		obj->base.write_domain = 0;
-		list_del_init(&obj->gpu_write_list);
-		i915_gem_object_move_to_inactive(obj);
-	}
-
 	/* Move everything out of the GPU domains to ensure we do any
 	 * necessary invalidation upon reuse.
 	 */
@@ -1765,7 +1716,7 @@
 
 	WARN_ON(i915_verify_lists(ring->dev));
 
-	seqno = ring->get_seqno(ring);
+	seqno = ring->get_seqno(ring, true);
 
 	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++)
 		if (seqno >= ring->sync_seqno[i])
@@ -1804,13 +1755,10 @@
 				      struct drm_i915_gem_object,
 				      ring_list);
 
-		if (!i915_seqno_passed(seqno, obj->last_rendering_seqno))
+		if (!i915_seqno_passed(seqno, obj->last_read_seqno))
 			break;
 
-		if (obj->base.write_domain != 0)
-			i915_gem_object_move_to_flushing(obj);
-		else
-			i915_gem_object_move_to_inactive(obj);
+		i915_gem_object_move_to_inactive(obj);
 	}
 
 	if (unlikely(ring->trace_irq_seqno &&
@@ -1859,20 +1807,16 @@
 	 */
 	idle = true;
 	for_each_ring(ring, dev_priv, i) {
-		if (ring->gpu_caches_dirty) {
-			struct drm_i915_gem_request *request;
-
-			request = kzalloc(sizeof(*request), GFP_KERNEL);
-			if (request == NULL ||
-			    i915_add_request(ring, NULL, request))
-			    kfree(request);
-		}
+		if (ring->gpu_caches_dirty)
+			i915_add_request(ring, NULL, NULL);
 
 		idle &= list_empty(&ring->request_list);
 	}
 
 	if (!dev_priv->mm.suspended && !idle)
 		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+	if (idle)
+		intel_mark_idle(dev);
 
 	mutex_unlock(&dev->struct_mutex);
 }
@@ -1913,25 +1857,13 @@
 static int
 i915_gem_check_olr(struct intel_ring_buffer *ring, u32 seqno)
 {
-	int ret = 0;
+	int ret;
 
 	BUG_ON(!mutex_is_locked(&ring->dev->struct_mutex));
 
-	if (seqno == ring->outstanding_lazy_request) {
-		struct drm_i915_gem_request *request;
-
-		request = kzalloc(sizeof(*request), GFP_KERNEL);
-		if (request == NULL)
-			return -ENOMEM;
-
-		ret = i915_add_request(ring, NULL, request);
-		if (ret) {
-			kfree(request);
-			return ret;
-		}
-
-		BUG_ON(seqno != request->seqno);
-	}
+	ret = 0;
+	if (seqno == ring->outstanding_lazy_request)
+		ret = i915_add_request(ring, NULL, NULL);
 
 	return ret;
 }
@@ -1956,7 +1888,7 @@
 	bool wait_forever = true;
 	int ret;
 
-	if (i915_seqno_passed(ring->get_seqno(ring), seqno))
+	if (i915_seqno_passed(ring->get_seqno(ring, true), seqno))
 		return 0;
 
 	trace_i915_gem_request_wait_begin(ring, seqno);
@@ -1975,7 +1907,7 @@
 	getrawmonotonic(&before);
 
 #define EXIT_COND \
-	(i915_seqno_passed(ring->get_seqno(ring), seqno) || \
+	(i915_seqno_passed(ring->get_seqno(ring, false), seqno) || \
 	atomic_read(&dev_priv->mm.wedged))
 	do {
 		if (interruptible)
@@ -2046,26 +1978,37 @@
  * Ensures that all rendering to the object has completed and the object is
  * safe to unbind from the GTT or access from the CPU.
  */
-int
-i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj)
+static __must_check int
+i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj,
+			       bool readonly)
 {
+	u32 seqno;
 	int ret;
 
-	/* This function only exists to support waiting for existing rendering,
-	 * not for emitting required flushes.
-	 */
-	BUG_ON((obj->base.write_domain & I915_GEM_GPU_DOMAINS) != 0);
-
 	/* If there is rendering queued on the buffer being evicted, wait for
 	 * it.
 	 */
-	if (obj->active) {
-		ret = i915_wait_seqno(obj->ring, obj->last_rendering_seqno);
-		if (ret)
-			return ret;
-		i915_gem_retire_requests_ring(obj->ring);
+	if (readonly)
+		seqno = obj->last_write_seqno;
+	else
+		seqno = obj->last_read_seqno;
+	if (seqno == 0)
+		return 0;
+
+	ret = i915_wait_seqno(obj->ring, seqno);
+	if (ret)
+		return ret;
+
+	/* Manually manage the write flush as we may have not yet retired
+	 * the buffer.
+	 */
+	if (obj->last_write_seqno &&
+	    i915_seqno_passed(seqno, obj->last_write_seqno)) {
+		obj->last_write_seqno = 0;
+		obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS;
 	}
 
+	i915_gem_retire_requests_ring(obj->ring);
 	return 0;
 }
 
@@ -2080,14 +2023,10 @@
 	int ret;
 
 	if (obj->active) {
-		ret = i915_gem_object_flush_gpu_write_domain(obj);
+		ret = i915_gem_check_olr(obj->ring, obj->last_read_seqno);
 		if (ret)
 			return ret;
 
-		ret = i915_gem_check_olr(obj->ring,
-					 obj->last_rendering_seqno);
-		if (ret)
-			return ret;
 		i915_gem_retire_requests_ring(obj->ring);
 	}
 
@@ -2147,7 +2086,7 @@
 		goto out;
 
 	if (obj->active) {
-		seqno = obj->last_rendering_seqno;
+		seqno = obj->last_read_seqno;
 		ring = obj->ring;
 	}
 
@@ -2202,11 +2141,11 @@
 		return 0;
 
 	if (to == NULL || !i915_semaphore_is_enabled(obj->base.dev))
-		return i915_gem_object_wait_rendering(obj);
+		return i915_gem_object_wait_rendering(obj, false);
 
 	idx = intel_ring_sync_index(from, to);
 
-	seqno = obj->last_rendering_seqno;
+	seqno = obj->last_read_seqno;
 	if (seqno <= from->sync_seqno[idx])
 		return 0;
 
@@ -2318,42 +2257,11 @@
 	return ret;
 }
 
-int
-i915_gem_flush_ring(struct intel_ring_buffer *ring,
-		    uint32_t invalidate_domains,
-		    uint32_t flush_domains)
-{
-	int ret;
-
-	if (((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) == 0)
-		return 0;
-
-	trace_i915_gem_ring_flush(ring, invalidate_domains, flush_domains);
-
-	ret = ring->flush(ring, invalidate_domains, flush_domains);
-	if (ret)
-		return ret;
-
-	if (flush_domains & I915_GEM_GPU_DOMAINS)
-		i915_gem_process_flushing_list(ring, flush_domains);
-
-	return 0;
-}
-
 static int i915_ring_idle(struct intel_ring_buffer *ring)
 {
-	int ret;
-
-	if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
+	if (list_empty(&ring->active_list))
 		return 0;
 
-	if (!list_empty(&ring->gpu_write_list)) {
-		ret = i915_gem_flush_ring(ring,
-				    I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
-		if (ret)
-			return ret;
-	}
-
 	return i915_wait_seqno(ring, i915_gem_next_request_seqno(ring));
 }
 
@@ -2369,10 +2277,6 @@
 		if (ret)
 			return ret;
 
-		/* Is the device fubar? */
-		if (WARN_ON(!list_empty(&ring->gpu_write_list)))
-			return -EBUSY;
-
 		ret = i915_switch_context(ring, NULL, DEFAULT_CONTEXT_ID);
 		if (ret)
 			return ret;
@@ -2548,21 +2452,8 @@
 static int
 i915_gem_object_flush_fence(struct drm_i915_gem_object *obj)
 {
-	int ret;
-
-	if (obj->fenced_gpu_access) {
-		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
-			ret = i915_gem_flush_ring(obj->ring,
-						  0, obj->base.write_domain);
-			if (ret)
-				return ret;
-		}
-
-		obj->fenced_gpu_access = false;
-	}
-
 	if (obj->last_fenced_seqno) {
-		ret = i915_wait_seqno(obj->ring, obj->last_fenced_seqno);
+		int ret = i915_wait_seqno(obj->ring, obj->last_fenced_seqno);
 		if (ret)
 			return ret;
 
@@ -2575,6 +2466,7 @@
 	if (obj->base.read_domains & I915_GEM_DOMAIN_GTT)
 		mb();
 
+	obj->fenced_gpu_access = false;
 	return 0;
 }
 
@@ -2694,6 +2586,76 @@
 	return 0;
 }
 
+static bool i915_gem_valid_gtt_space(struct drm_device *dev,
+				     struct drm_mm_node *gtt_space,
+				     unsigned long cache_level)
+{
+	struct drm_mm_node *other;
+
+	/* On non-LLC machines we have to be careful when putting differing
+	 * types of snoopable memory together to avoid the prefetcher
+	 * crossing memory domains and dieing.
+	 */
+	if (HAS_LLC(dev))
+		return true;
+
+	if (gtt_space == NULL)
+		return true;
+
+	if (list_empty(&gtt_space->node_list))
+		return true;
+
+	other = list_entry(gtt_space->node_list.prev, struct drm_mm_node, node_list);
+	if (other->allocated && !other->hole_follows && other->color != cache_level)
+		return false;
+
+	other = list_entry(gtt_space->node_list.next, struct drm_mm_node, node_list);
+	if (other->allocated && !gtt_space->hole_follows && other->color != cache_level)
+		return false;
+
+	return true;
+}
+
+static void i915_gem_verify_gtt(struct drm_device *dev)
+{
+#if WATCH_GTT
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int err = 0;
+
+	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
+		if (obj->gtt_space == NULL) {
+			printk(KERN_ERR "object found on GTT list with no space reserved\n");
+			err++;
+			continue;
+		}
+
+		if (obj->cache_level != obj->gtt_space->color) {
+			printk(KERN_ERR "object reserved space [%08lx, %08lx] with wrong color, cache_level=%x, color=%lx\n",
+			       obj->gtt_space->start,
+			       obj->gtt_space->start + obj->gtt_space->size,
+			       obj->cache_level,
+			       obj->gtt_space->color);
+			err++;
+			continue;
+		}
+
+		if (!i915_gem_valid_gtt_space(dev,
+					      obj->gtt_space,
+					      obj->cache_level)) {
+			printk(KERN_ERR "invalid GTT space found at [%08lx, %08lx] - color=%x\n",
+			       obj->gtt_space->start,
+			       obj->gtt_space->start + obj->gtt_space->size,
+			       obj->cache_level);
+			err++;
+			continue;
+		}
+	}
+
+	WARN_ON(err);
+#endif
+}
+
 /**
  * Finds free space in the GTT aperture and binds the object there.
  */
@@ -2748,36 +2710,47 @@
  search_free:
 	if (map_and_fenceable)
 		free_space =
-			drm_mm_search_free_in_range(&dev_priv->mm.gtt_space,
-						    size, alignment,
-						    0, dev_priv->mm.gtt_mappable_end,
-						    0);
+			drm_mm_search_free_in_range_color(&dev_priv->mm.gtt_space,
+							  size, alignment, obj->cache_level,
+							  0, dev_priv->mm.gtt_mappable_end,
+							  false);
 	else
-		free_space = drm_mm_search_free(&dev_priv->mm.gtt_space,
-						size, alignment, 0);
+		free_space = drm_mm_search_free_color(&dev_priv->mm.gtt_space,
+						      size, alignment, obj->cache_level,
+						      false);
 
 	if (free_space != NULL) {
 		if (map_and_fenceable)
 			obj->gtt_space =
 				drm_mm_get_block_range_generic(free_space,
-							       size, alignment, 0,
+							       size, alignment, obj->cache_level,
 							       0, dev_priv->mm.gtt_mappable_end,
-							       0);
+							       false);
 		else
 			obj->gtt_space =
-				drm_mm_get_block(free_space, size, alignment);
+				drm_mm_get_block_generic(free_space,
+							 size, alignment, obj->cache_level,
+							 false);
 	}
 	if (obj->gtt_space == NULL) {
 		/* If the gtt is empty and we're still having trouble
 		 * fitting our object in, we're out of memory.
 		 */
 		ret = i915_gem_evict_something(dev, size, alignment,
+					       obj->cache_level,
 					       map_and_fenceable);
 		if (ret)
 			return ret;
 
 		goto search_free;
 	}
+	if (WARN_ON(!i915_gem_valid_gtt_space(dev,
+					      obj->gtt_space,
+					      obj->cache_level))) {
+		drm_mm_put_block(obj->gtt_space);
+		obj->gtt_space = NULL;
+		return -EINVAL;
+	}
 
 	ret = i915_gem_object_get_pages_gtt(obj, gfpmask);
 	if (ret) {
@@ -2840,6 +2813,7 @@
 	obj->map_and_fenceable = mappable && fenceable;
 
 	trace_i915_gem_object_bind(obj, map_and_fenceable);
+	i915_gem_verify_gtt(dev);
 	return 0;
 }
 
@@ -2869,17 +2843,6 @@
 	drm_clflush_pages(obj->pages, obj->base.size / PAGE_SIZE);
 }
 
-/** Flushes any GPU write domain for the object if it's dirty. */
-static int
-i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj)
-{
-	if ((obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0)
-		return 0;
-
-	/* Queue the GPU write cache flushing we need. */
-	return i915_gem_flush_ring(obj->ring, 0, obj->base.write_domain);
-}
-
 /** Flushes the GTT write domain for the object if it's dirty. */
 static void
 i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj)
@@ -2946,16 +2909,10 @@
 	if (obj->base.write_domain == I915_GEM_DOMAIN_GTT)
 		return 0;
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_wait_rendering(obj, !write);
 	if (ret)
 		return ret;
 
-	if (obj->pending_gpu_write || write) {
-		ret = i915_gem_object_wait_rendering(obj);
-		if (ret)
-			return ret;
-	}
-
 	i915_gem_object_flush_cpu_write_domain(obj);
 
 	old_write_domain = obj->base.write_domain;
@@ -2998,6 +2955,12 @@
 		return -EBUSY;
 	}
 
+	if (!i915_gem_valid_gtt_space(dev, obj->gtt_space, cache_level)) {
+		ret = i915_gem_object_unbind(obj);
+		if (ret)
+			return ret;
+	}
+
 	if (obj->gtt_space) {
 		ret = i915_gem_object_finish_gpu(obj);
 		if (ret)
@@ -3009,7 +2972,7 @@
 		 * registers with snooped memory, so relinquish any fences
 		 * currently pointing to our region in the aperture.
 		 */
-		if (INTEL_INFO(obj->base.dev)->gen < 6) {
+		if (INTEL_INFO(dev)->gen < 6) {
 			ret = i915_gem_object_put_fence(obj);
 			if (ret)
 				return ret;
@@ -3020,6 +2983,8 @@
 		if (obj->has_aliasing_ppgtt_mapping)
 			i915_ppgtt_bind_object(dev_priv->mm.aliasing_ppgtt,
 					       obj, cache_level);
+
+		obj->gtt_space->color = cache_level;
 	}
 
 	if (cache_level == I915_CACHE_NONE) {
@@ -3046,9 +3011,72 @@
 	}
 
 	obj->cache_level = cache_level;
+	i915_gem_verify_gtt(dev);
 	return 0;
 }
 
+int i915_gem_get_cacheing_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file)
+{
+	struct drm_i915_gem_cacheing *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	args->cacheing = obj->cache_level != I915_CACHE_NONE;
+
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+int i915_gem_set_cacheing_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file)
+{
+	struct drm_i915_gem_cacheing *args = data;
+	struct drm_i915_gem_object *obj;
+	enum i915_cache_level level;
+	int ret;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	switch (args->cacheing) {
+	case I915_CACHEING_NONE:
+		level = I915_CACHE_NONE;
+		break;
+	case I915_CACHEING_CACHED:
+		level = I915_CACHE_LLC;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	ret = i915_gem_object_set_cache_level(obj, level);
+
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
 /*
  * Prepare buffer for display plane (scanout, cursors, etc).
  * Can be called from an uninterruptible phase (modesetting) and allows
@@ -3062,10 +3090,6 @@
 	u32 old_read_domains, old_write_domain;
 	int ret;
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj);
-	if (ret)
-		return ret;
-
 	if (pipelined != obj->ring) {
 		ret = i915_gem_object_sync(obj, pipelined);
 		if (ret)
@@ -3101,7 +3125,7 @@
 	/* It should now be out of any other write domains, and we can update
 	 * the domain values for our changes.
 	 */
-	BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->base.write_domain = 0;
 	obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
 
 	trace_i915_gem_object_change_domain(obj,
@@ -3119,13 +3143,7 @@
 	if ((obj->base.read_domains & I915_GEM_GPU_DOMAINS) == 0)
 		return 0;
 
-	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
-		ret = i915_gem_flush_ring(obj->ring, 0, obj->base.write_domain);
-		if (ret)
-			return ret;
-	}
-
-	ret = i915_gem_object_wait_rendering(obj);
+	ret = i915_gem_object_wait_rendering(obj, false);
 	if (ret)
 		return ret;
 
@@ -3149,16 +3167,10 @@
 	if (obj->base.write_domain == I915_GEM_DOMAIN_CPU)
 		return 0;
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_wait_rendering(obj, !write);
 	if (ret)
 		return ret;
 
-	if (write || obj->pending_gpu_write) {
-		ret = i915_gem_object_wait_rendering(obj);
-		if (ret)
-			return ret;
-	}
-
 	i915_gem_object_flush_gtt_write_domain(obj);
 
 	old_write_domain = obj->base.write_domain;
@@ -3400,6 +3412,10 @@
 	ret = i915_gem_object_flush_active(obj);
 
 	args->busy = obj->active;
+	if (obj->ring) {
+		BUILD_BUG_ON(I915_NUM_RINGS > 16);
+		args->busy |= intel_ring_flag(obj->ring) << 16;
+	}
 
 	drm_gem_object_unreference(&obj->base);
 unlock:
@@ -3517,7 +3533,6 @@
 	INIT_LIST_HEAD(&obj->gtt_list);
 	INIT_LIST_HEAD(&obj->ring_list);
 	INIT_LIST_HEAD(&obj->exec_list);
-	INIT_LIST_HEAD(&obj->gpu_write_list);
 	obj->madv = I915_MADV_WILLNEED;
 	/* Avoid an unnecessary call to unbind on the first bind. */
 	obj->map_and_fenceable = true;
@@ -3891,7 +3906,6 @@
 	}
 
 	BUG_ON(!list_empty(&dev_priv->mm.active_list));
-	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
 	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
 	mutex_unlock(&dev->struct_mutex);
 
@@ -3939,7 +3953,6 @@
 {
 	INIT_LIST_HEAD(&ring->active_list);
 	INIT_LIST_HEAD(&ring->request_list);
-	INIT_LIST_HEAD(&ring->gpu_write_list);
 }
 
 void
@@ -3949,7 +3962,6 @@
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	INIT_LIST_HEAD(&dev_priv->mm.active_list);
-	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
 	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
 	INIT_LIST_HEAD(&dev_priv->mm.gtt_list);
@@ -4200,12 +4212,7 @@
 i915_gpu_is_active(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	int lists_empty;
-
-	lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
-		      list_empty(&dev_priv->mm.active_list);
-
-	return !lists_empty;
+	return !list_empty(&dev_priv->mm.active_list);
 }
 
 static int
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index a9d58d7..5c2d354 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -97,8 +97,7 @@
 
 static struct i915_hw_context *
 i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id);
-static int do_switch(struct drm_i915_gem_object *from_obj,
-		     struct i915_hw_context *to, u32 seqno);
+static int do_switch(struct i915_hw_context *to);
 
 static int get_context_size(struct drm_device *dev)
 {
@@ -113,7 +112,10 @@
 		break;
 	case 7:
 		reg = I915_READ(GEN7_CXT_SIZE);
-		ret = GEN7_CXT_TOTAL_SIZE(reg) * 64;
+		if (IS_HASWELL(dev))
+			ret = HSW_CXT_TOTAL_SIZE(reg) * 64;
+		else
+			ret = GEN7_CXT_TOTAL_SIZE(reg) * 64;
 		break;
 	default:
 		BUG();
@@ -220,19 +222,20 @@
 	 */
 	dev_priv->ring[RCS].default_context = ctx;
 	ret = i915_gem_object_pin(ctx->obj, CONTEXT_ALIGN, false);
-	if (ret) {
-		do_destroy(ctx);
-		return ret;
-	}
+	if (ret)
+		goto err_destroy;
 
-	ret = do_switch(NULL, ctx, 0);
-	if (ret) {
-		i915_gem_object_unpin(ctx->obj);
-		do_destroy(ctx);
-	} else {
-		DRM_DEBUG_DRIVER("Default HW context loaded\n");
-	}
+	ret = do_switch(ctx);
+	if (ret)
+		goto err_unpin;
 
+	DRM_DEBUG_DRIVER("Default HW context loaded\n");
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(ctx->obj);
+err_destroy:
+	do_destroy(ctx);
 	return ret;
 }
 
@@ -359,17 +362,18 @@
 	return ret;
 }
 
-static int do_switch(struct drm_i915_gem_object *from_obj,
-		     struct i915_hw_context *to,
-		     u32 seqno)
+static int do_switch(struct i915_hw_context *to)
 {
-	struct intel_ring_buffer *ring = NULL;
+	struct intel_ring_buffer *ring = to->ring;
+	struct drm_i915_gem_object *from_obj = ring->last_context_obj;
 	u32 hw_flags = 0;
 	int ret;
 
-	BUG_ON(to == NULL);
 	BUG_ON(from_obj != NULL && from_obj->pin_count == 0);
 
+	if (from_obj == to->obj)
+		return 0;
+
 	ret = i915_gem_object_pin(to->obj, CONTEXT_ALIGN, false);
 	if (ret)
 		return ret;
@@ -393,7 +397,6 @@
 	else if (WARN_ON_ONCE(from_obj == to->obj)) /* not yet expected */
 		hw_flags |= MI_FORCE_RESTORE;
 
-	ring = to->ring;
 	ret = mi_set_context(ring, to, hw_flags);
 	if (ret) {
 		i915_gem_object_unpin(to->obj);
@@ -407,6 +410,7 @@
 	 * MI_SET_CONTEXT instead of when the next seqno has completed.
 	 */
 	if (from_obj != NULL) {
+		u32 seqno = i915_gem_next_request_seqno(ring);
 		from_obj->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
 		i915_gem_object_move_to_active(from_obj, ring, seqno);
 		/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
@@ -417,7 +421,7 @@
 		 * swapped, but there is no way to do that yet.
 		 */
 		from_obj->dirty = 1;
-		BUG_ON(from_obj->ring != to->ring);
+		BUG_ON(from_obj->ring != ring);
 		i915_gem_object_unpin(from_obj);
 
 		drm_gem_object_unreference(&from_obj->base);
@@ -448,9 +452,7 @@
 			int to_id)
 {
 	struct drm_i915_private *dev_priv = ring->dev->dev_private;
-	struct drm_i915_file_private *file_priv = NULL;
 	struct i915_hw_context *to;
-	struct drm_i915_gem_object *from_obj = ring->last_context_obj;
 
 	if (dev_priv->hw_contexts_disabled)
 		return 0;
@@ -458,21 +460,18 @@
 	if (ring != &dev_priv->ring[RCS])
 		return 0;
 
-	if (file)
-		file_priv = file->driver_priv;
-
 	if (to_id == DEFAULT_CONTEXT_ID) {
 		to = ring->default_context;
 	} else {
-		to = i915_gem_context_get(file_priv, to_id);
+		if (file == NULL)
+			return -EINVAL;
+
+		to = i915_gem_context_get(file->driver_priv, to_id);
 		if (to == NULL)
 			return -ENOENT;
 	}
 
-	if (from_obj == to->obj)
-		return 0;
-
-	return do_switch(from_obj, to, i915_gem_next_request_seqno(to->ring));
+	return do_switch(to);
 }
 
 int i915_gem_context_create_ioctl(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index eba0308..7279c31 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -44,7 +44,8 @@
 
 int
 i915_gem_evict_something(struct drm_device *dev, int min_size,
-			 unsigned alignment, bool mappable)
+			 unsigned alignment, unsigned cache_level,
+			 bool mappable)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct list_head eviction_list, unwind_list;
@@ -79,11 +80,11 @@
 	INIT_LIST_HEAD(&unwind_list);
 	if (mappable)
 		drm_mm_init_scan_with_range(&dev_priv->mm.gtt_space,
-					    min_size, alignment, 0,
+					    min_size, alignment, cache_level,
 					    0, dev_priv->mm.gtt_mappable_end);
 	else
 		drm_mm_init_scan(&dev_priv->mm.gtt_space,
-				 min_size, alignment, 0);
+				 min_size, alignment, cache_level);
 
 	/* First see if there is a large enough contiguous idle region... */
 	list_for_each_entry(obj, &dev_priv->mm.inactive_list, mm_list) {
@@ -93,23 +94,6 @@
 
 	/* Now merge in the soon-to-be-expired objects... */
 	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
-		/* Does the object require an outstanding flush? */
-		if (obj->base.write_domain)
-			continue;
-
-		if (mark_free(obj, &unwind_list))
-			goto found;
-	}
-
-	/* Finally add anything with a pending flush (in order of retirement) */
-	list_for_each_entry(obj, &dev_priv->mm.flushing_list, mm_list) {
-		if (mark_free(obj, &unwind_list))
-			goto found;
-	}
-	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
-		if (!obj->base.write_domain)
-			continue;
-
 		if (mark_free(obj, &unwind_list))
 			goto found;
 	}
@@ -172,7 +156,6 @@
 	int ret;
 
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
-		       list_empty(&dev_priv->mm.flushing_list) &&
 		       list_empty(&dev_priv->mm.active_list));
 	if (lists_empty)
 		return -ENOSPC;
@@ -189,8 +172,6 @@
 
 	i915_gem_retire_requests(dev);
 
-	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
-
 	/* Having flushed everything, unbind() should never raise an error */
 	list_for_each_entry_safe(obj, next,
 				 &dev_priv->mm.inactive_list, mm_list) {
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index ff2819e..afb312e 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -34,180 +34,6 @@
 #include "intel_drv.h"
 #include <linux/dma_remapping.h>
 
-struct change_domains {
-	uint32_t invalidate_domains;
-	uint32_t flush_domains;
-	uint32_t flush_rings;
-	uint32_t flips;
-};
-
-/*
- * Set the next domain for the specified object. This
- * may not actually perform the necessary flushing/invaliding though,
- * as that may want to be batched with other set_domain operations
- *
- * This is (we hope) the only really tricky part of gem. The goal
- * is fairly simple -- track which caches hold bits of the object
- * and make sure they remain coherent. A few concrete examples may
- * help to explain how it works. For shorthand, we use the notation
- * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the
- * a pair of read and write domain masks.
- *
- * Case 1: the batch buffer
- *
- *	1. Allocated
- *	2. Written by CPU
- *	3. Mapped to GTT
- *	4. Read by GPU
- *	5. Unmapped from GTT
- *	6. Freed
- *
- *	Let's take these a step at a time
- *
- *	1. Allocated
- *		Pages allocated from the kernel may still have
- *		cache contents, so we set them to (CPU, CPU) always.
- *	2. Written by CPU (using pwrite)
- *		The pwrite function calls set_domain (CPU, CPU) and
- *		this function does nothing (as nothing changes)
- *	3. Mapped by GTT
- *		This function asserts that the object is not
- *		currently in any GPU-based read or write domains
- *	4. Read by GPU
- *		i915_gem_execbuffer calls set_domain (COMMAND, 0).
- *		As write_domain is zero, this function adds in the
- *		current read domains (CPU+COMMAND, 0).
- *		flush_domains is set to CPU.
- *		invalidate_domains is set to COMMAND
- *		clflush is run to get data out of the CPU caches
- *		then i915_dev_set_domain calls i915_gem_flush to
- *		emit an MI_FLUSH and drm_agp_chipset_flush
- *	5. Unmapped from GTT
- *		i915_gem_object_unbind calls set_domain (CPU, CPU)
- *		flush_domains and invalidate_domains end up both zero
- *		so no flushing/invalidating happens
- *	6. Freed
- *		yay, done
- *
- * Case 2: The shared render buffer
- *
- *	1. Allocated
- *	2. Mapped to GTT
- *	3. Read/written by GPU
- *	4. set_domain to (CPU,CPU)
- *	5. Read/written by CPU
- *	6. Read/written by GPU
- *
- *	1. Allocated
- *		Same as last example, (CPU, CPU)
- *	2. Mapped to GTT
- *		Nothing changes (assertions find that it is not in the GPU)
- *	3. Read/written by GPU
- *		execbuffer calls set_domain (RENDER, RENDER)
- *		flush_domains gets CPU
- *		invalidate_domains gets GPU
- *		clflush (obj)
- *		MI_FLUSH and drm_agp_chipset_flush
- *	4. set_domain (CPU, CPU)
- *		flush_domains gets GPU
- *		invalidate_domains gets CPU
- *		wait_rendering (obj) to make sure all drawing is complete.
- *		This will include an MI_FLUSH to get the data from GPU
- *		to memory
- *		clflush (obj) to invalidate the CPU cache
- *		Another MI_FLUSH in i915_gem_flush (eliminate this somehow?)
- *	5. Read/written by CPU
- *		cache lines are loaded and dirtied
- *	6. Read written by GPU
- *		Same as last GPU access
- *
- * Case 3: The constant buffer
- *
- *	1. Allocated
- *	2. Written by CPU
- *	3. Read by GPU
- *	4. Updated (written) by CPU again
- *	5. Read by GPU
- *
- *	1. Allocated
- *		(CPU, CPU)
- *	2. Written by CPU
- *		(CPU, CPU)
- *	3. Read by GPU
- *		(CPU+RENDER, 0)
- *		flush_domains = CPU
- *		invalidate_domains = RENDER
- *		clflush (obj)
- *		MI_FLUSH
- *		drm_agp_chipset_flush
- *	4. Updated (written) by CPU again
- *		(CPU, CPU)
- *		flush_domains = 0 (no previous write domain)
- *		invalidate_domains = 0 (no new read domains)
- *	5. Read by GPU
- *		(CPU+RENDER, 0)
- *		flush_domains = CPU
- *		invalidate_domains = RENDER
- *		clflush (obj)
- *		MI_FLUSH
- *		drm_agp_chipset_flush
- */
-static void
-i915_gem_object_set_to_gpu_domain(struct drm_i915_gem_object *obj,
-				  struct intel_ring_buffer *ring,
-				  struct change_domains *cd)
-{
-	uint32_t invalidate_domains = 0, flush_domains = 0;
-
-	/*
-	 * If the object isn't moving to a new write domain,
-	 * let the object stay in multiple read domains
-	 */
-	if (obj->base.pending_write_domain == 0)
-		obj->base.pending_read_domains |= obj->base.read_domains;
-
-	/*
-	 * Flush the current write domain if
-	 * the new read domains don't match. Invalidate
-	 * any read domains which differ from the old
-	 * write domain
-	 */
-	if (obj->base.write_domain &&
-	    (((obj->base.write_domain != obj->base.pending_read_domains ||
-	       obj->ring != ring)) ||
-	     (obj->fenced_gpu_access && !obj->pending_fenced_gpu_access))) {
-		flush_domains |= obj->base.write_domain;
-		invalidate_domains |=
-			obj->base.pending_read_domains & ~obj->base.write_domain;
-	}
-	/*
-	 * Invalidate any read caches which may have
-	 * stale data. That is, any new read domains.
-	 */
-	invalidate_domains |= obj->base.pending_read_domains & ~obj->base.read_domains;
-	if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU)
-		i915_gem_clflush_object(obj);
-
-	if (obj->base.pending_write_domain)
-		cd->flips |= atomic_read(&obj->pending_flip);
-
-	/* The actual obj->write_domain will be updated with
-	 * pending_write_domain after we emit the accumulated flush for all
-	 * of our domain changes in execbuffers (which clears objects'
-	 * write_domains).  So if we have a current write domain that we
-	 * aren't changing, set pending_write_domain to that.
-	 */
-	if (flush_domains == 0 && obj->base.pending_write_domain == 0)
-		obj->base.pending_write_domain = obj->base.write_domain;
-
-	cd->invalidate_domains |= invalidate_domains;
-	cd->flush_domains |= flush_domains;
-	if (flush_domains & I915_GEM_GPU_DOMAINS)
-		cd->flush_rings |= intel_ring_flag(obj->ring);
-	if (invalidate_domains & I915_GEM_GPU_DOMAINS)
-		cd->flush_rings |= intel_ring_flag(ring);
-}
-
 struct eb_objects {
 	int and;
 	struct hlist_head buckets[0];
@@ -587,6 +413,7 @@
 
 		obj->base.pending_read_domains = 0;
 		obj->base.pending_write_domain = 0;
+		obj->pending_fenced_gpu_access = false;
 	}
 	list_splice(&ordered_objects, objects);
 
@@ -810,18 +637,6 @@
 	return ret;
 }
 
-static void
-i915_gem_execbuffer_flush(struct drm_device *dev,
-			  uint32_t invalidate_domains,
-			  uint32_t flush_domains)
-{
-	if (flush_domains & I915_GEM_DOMAIN_CPU)
-		intel_gtt_chipset_flush();
-
-	if (flush_domains & I915_GEM_DOMAIN_GTT)
-		wmb();
-}
-
 static int
 i915_gem_execbuffer_wait_for_flips(struct intel_ring_buffer *ring, u32 flips)
 {
@@ -854,48 +669,45 @@
 	return 0;
 }
 
-
 static int
 i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring,
 				struct list_head *objects)
 {
 	struct drm_i915_gem_object *obj;
-	struct change_domains cd;
+	uint32_t flush_domains = 0;
+	uint32_t flips = 0;
 	int ret;
 
-	memset(&cd, 0, sizeof(cd));
-	list_for_each_entry(obj, objects, exec_list)
-		i915_gem_object_set_to_gpu_domain(obj, ring, &cd);
-
-	if (cd.invalidate_domains | cd.flush_domains) {
-		i915_gem_execbuffer_flush(ring->dev,
-					  cd.invalidate_domains,
-					  cd.flush_domains);
-	}
-
-	if (cd.flips) {
-		ret = i915_gem_execbuffer_wait_for_flips(ring, cd.flips);
-		if (ret)
-			return ret;
-	}
-
 	list_for_each_entry(obj, objects, exec_list) {
 		ret = i915_gem_object_sync(obj, ring);
 		if (ret)
 			return ret;
+
+		if (obj->base.write_domain & I915_GEM_DOMAIN_CPU)
+			i915_gem_clflush_object(obj);
+
+		if (obj->base.pending_write_domain)
+			flips |= atomic_read(&obj->pending_flip);
+
+		flush_domains |= obj->base.write_domain;
 	}
 
+	if (flips) {
+		ret = i915_gem_execbuffer_wait_for_flips(ring, flips);
+		if (ret)
+			return ret;
+	}
+
+	if (flush_domains & I915_GEM_DOMAIN_CPU)
+		intel_gtt_chipset_flush();
+
+	if (flush_domains & I915_GEM_DOMAIN_GTT)
+		wmb();
+
 	/* Unconditionally invalidate gpu caches and ensure that we do flush
 	 * any residual writes from the previous batch.
 	 */
-	ret = i915_gem_flush_ring(ring,
-				  I915_GEM_GPU_DOMAINS,
-				  ring->gpu_caches_dirty ? I915_GEM_GPU_DOMAINS : 0);
-	if (ret)
-		return ret;
-
-	ring->gpu_caches_dirty = false;
-	return 0;
+	return intel_ring_invalidate_all_caches(ring);
 }
 
 static bool
@@ -943,9 +755,8 @@
 	struct drm_i915_gem_object *obj;
 
 	list_for_each_entry(obj, objects, exec_list) {
-		  u32 old_read = obj->base.read_domains;
-		  u32 old_write = obj->base.write_domain;
-
+		u32 old_read = obj->base.read_domains;
+		u32 old_write = obj->base.write_domain;
 
 		obj->base.read_domains = obj->base.pending_read_domains;
 		obj->base.write_domain = obj->base.pending_write_domain;
@@ -954,17 +765,13 @@
 		i915_gem_object_move_to_active(obj, ring, seqno);
 		if (obj->base.write_domain) {
 			obj->dirty = 1;
-			obj->pending_gpu_write = true;
-			list_move_tail(&obj->gpu_write_list,
-				       &ring->gpu_write_list);
+			obj->last_write_seqno = seqno;
 			if (obj->pin_count) /* check for potential scanout */
-				intel_mark_busy(ring->dev, obj);
+				intel_mark_fb_busy(obj);
 		}
 
 		trace_i915_gem_object_change_domain(obj, old_read, old_write);
 	}
-
-	intel_mark_busy(ring->dev, NULL);
 }
 
 static void
@@ -972,16 +779,11 @@
 				    struct drm_file *file,
 				    struct intel_ring_buffer *ring)
 {
-	struct drm_i915_gem_request *request;
-
 	/* Unconditionally force add_request to emit a full flush. */
 	ring->gpu_caches_dirty = true;
 
 	/* Add a breadcrumb for the completion of the batch buffer */
-	request = kzalloc(sizeof(*request), GFP_KERNEL);
-	if (request == NULL || i915_add_request(ring, file, request)) {
-		kfree(request);
-	}
+	(void)i915_add_request(ring, file, NULL);
 }
 
 static int
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index ee9b68f..3b3b731 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -423,6 +423,23 @@
 	undo_idling(dev_priv, interruptible);
 }
 
+static void i915_gtt_color_adjust(struct drm_mm_node *node,
+				  unsigned long color,
+				  unsigned long *start,
+				  unsigned long *end)
+{
+	if (node->color != color)
+		*start += 4096;
+
+	if (!list_empty(&node->node_list)) {
+		node = list_entry(node->node_list.next,
+				  struct drm_mm_node,
+				  node_list);
+		if (node->allocated && node->color != color)
+			*end -= 4096;
+	}
+}
+
 void i915_gem_init_global_gtt(struct drm_device *dev,
 			      unsigned long start,
 			      unsigned long mappable_end,
@@ -432,6 +449,8 @@
 
 	/* Substract the guard page ... */
 	drm_mm_init(&dev_priv->mm.gtt_space, start, end - start - PAGE_SIZE);
+	if (!HAS_LLC(dev))
+		dev_priv->mm.gtt_space.color_adjust = i915_gtt_color_adjust;
 
 	dev_priv->mm.gtt_start = start;
 	dev_priv->mm.gtt_mappable_end = mappable_end;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8a38285..a61b41a 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -296,11 +296,21 @@
 	drm_helper_hpd_irq_event(dev);
 }
 
-static void i915_handle_rps_change(struct drm_device *dev)
+/* defined intel_pm.c */
+extern spinlock_t mchdev_lock;
+
+static void ironlake_handle_rps_change(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	u32 busy_up, busy_down, max_avg, min_avg;
-	u8 new_delay = dev_priv->cur_delay;
+	u8 new_delay;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mchdev_lock, flags);
+
+	I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
+
+	new_delay = dev_priv->cur_delay;
 
 	I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
 	busy_up = I915_READ(RCPREVBSYTUPAVG);
@@ -324,6 +334,8 @@
 	if (ironlake_set_drps(dev, new_delay))
 		dev_priv->cur_delay = new_delay;
 
+	spin_unlock_irqrestore(&mchdev_lock, flags);
+
 	return;
 }
 
@@ -335,7 +347,7 @@
 	if (ring->obj == NULL)
 		return;
 
-	trace_i915_gem_request_complete(ring, ring->get_seqno(ring));
+	trace_i915_gem_request_complete(ring, ring->get_seqno(ring, false));
 
 	wake_up_all(&ring->irq_queue);
 	if (i915_enable_hangcheck) {
@@ -349,16 +361,16 @@
 static void gen6_pm_rps_work(struct work_struct *work)
 {
 	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
-						    rps_work);
+						    rps.work);
 	u32 pm_iir, pm_imr;
 	u8 new_delay;
 
-	spin_lock_irq(&dev_priv->rps_lock);
-	pm_iir = dev_priv->pm_iir;
-	dev_priv->pm_iir = 0;
+	spin_lock_irq(&dev_priv->rps.lock);
+	pm_iir = dev_priv->rps.pm_iir;
+	dev_priv->rps.pm_iir = 0;
 	pm_imr = I915_READ(GEN6_PMIMR);
 	I915_WRITE(GEN6_PMIMR, 0);
-	spin_unlock_irq(&dev_priv->rps_lock);
+	spin_unlock_irq(&dev_priv->rps.lock);
 
 	if ((pm_iir & GEN6_PM_DEFERRED_EVENTS) == 0)
 		return;
@@ -366,9 +378,9 @@
 	mutex_lock(&dev_priv->dev->struct_mutex);
 
 	if (pm_iir & GEN6_PM_RP_UP_THRESHOLD)
-		new_delay = dev_priv->cur_delay + 1;
+		new_delay = dev_priv->rps.cur_delay + 1;
 	else
-		new_delay = dev_priv->cur_delay - 1;
+		new_delay = dev_priv->rps.cur_delay - 1;
 
 	gen6_set_rps(dev_priv->dev, new_delay);
 
@@ -444,7 +456,7 @@
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long flags;
 
-	if (!IS_IVYBRIDGE(dev))
+	if (!HAS_L3_GPU_CACHE(dev))
 		return;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
@@ -488,19 +500,19 @@
 	 * IIR bits should never already be set because IMR should
 	 * prevent an interrupt from being shown in IIR. The warning
 	 * displays a case where we've unsafely cleared
-	 * dev_priv->pm_iir. Although missing an interrupt of the same
+	 * dev_priv->rps.pm_iir. Although missing an interrupt of the same
 	 * type is not a problem, it displays a problem in the logic.
 	 *
-	 * The mask bit in IMR is cleared by rps_work.
+	 * The mask bit in IMR is cleared by dev_priv->rps.work.
 	 */
 
-	spin_lock_irqsave(&dev_priv->rps_lock, flags);
-	dev_priv->pm_iir |= pm_iir;
-	I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
+	spin_lock_irqsave(&dev_priv->rps.lock, flags);
+	dev_priv->rps.pm_iir |= pm_iir;
+	I915_WRITE(GEN6_PMIMR, dev_priv->rps.pm_iir);
 	POSTING_READ(GEN6_PMIMR);
-	spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
+	spin_unlock_irqrestore(&dev_priv->rps.lock, flags);
 
-	queue_work(dev_priv->wq, &dev_priv->rps_work);
+	queue_work(dev_priv->wq, &dev_priv->rps.work);
 }
 
 static irqreturn_t valleyview_irq_handler(DRM_IRQ_ARGS)
@@ -793,10 +805,8 @@
 			ibx_irq_handler(dev, pch_iir);
 	}
 
-	if (de_iir & DE_PCU_EVENT) {
-		I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
-		i915_handle_rps_change(dev);
-	}
+	if (IS_GEN5(dev) &&  de_iir & DE_PCU_EVENT)
+		ironlake_handle_rps_change(dev);
 
 	if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
 		gen6_queue_rps_work(dev_priv, pm_iir);
@@ -949,7 +959,8 @@
 {
 	err->size = obj->base.size;
 	err->name = obj->base.name;
-	err->seqno = obj->last_rendering_seqno;
+	err->rseqno = obj->last_read_seqno;
+	err->wseqno = obj->last_write_seqno;
 	err->gtt_offset = obj->gtt_offset;
 	err->read_domains = obj->base.read_domains;
 	err->write_domain = obj->base.write_domain;
@@ -1039,12 +1050,12 @@
 	if (!ring->get_seqno)
 		return NULL;
 
-	seqno = ring->get_seqno(ring);
+	seqno = ring->get_seqno(ring, false);
 	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
 		if (obj->ring != ring)
 			continue;
 
-		if (i915_seqno_passed(seqno, obj->last_rendering_seqno))
+		if (i915_seqno_passed(seqno, obj->last_read_seqno))
 			continue;
 
 		if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
@@ -1093,7 +1104,7 @@
 
 	error->waiting[ring->id] = waitqueue_active(&ring->irq_queue);
 	error->instpm[ring->id] = I915_READ(RING_INSTPM(ring->mmio_base));
-	error->seqno[ring->id] = ring->get_seqno(ring);
+	error->seqno[ring->id] = ring->get_seqno(ring, false);
 	error->acthd[ring->id] = intel_ring_get_active_head(ring);
 	error->head[ring->id] = I915_READ_HEAD(ring);
 	error->tail[ring->id] = I915_READ_TAIL(ring);
@@ -1590,7 +1601,8 @@
 static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err)
 {
 	if (list_empty(&ring->request_list) ||
-	    i915_seqno_passed(ring->get_seqno(ring), ring_last_seqno(ring))) {
+	    i915_seqno_passed(ring->get_seqno(ring, false),
+			      ring_last_seqno(ring))) {
 		/* Issue a wake-up to catch stuck h/w. */
 		if (waitqueue_active(&ring->irq_queue)) {
 			DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
@@ -2647,7 +2659,7 @@
 
 	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
 	INIT_WORK(&dev_priv->error_work, i915_error_work_func);
-	INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
+	INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
 	INIT_WORK(&dev_priv->parity_error_work, ivybridge_parity_work);
 
 	dev->driver->get_vblank_counter = i915_get_vblank_counter;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index acc99b2..321ae72 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -449,6 +449,7 @@
 #define RING_ACTHD(base)	((base)+0x74)
 #define RING_NOPID(base)	((base)+0x94)
 #define RING_IMR(base)		((base)+0xa8)
+#define RING_TIMESTAMP(base)	((base)+0x358)
 #define   TAIL_ADDR		0x001FFFF8
 #define   HEAD_WRAP_COUNT	0xFFE00000
 #define   HEAD_WRAP_ONE		0x00200000
@@ -528,6 +529,8 @@
 #define   GFX_PSMI_GRANULARITY		(1<<10)
 #define   GFX_PPGTT_ENABLE		(1<<9)
 
+#define VLV_DISPLAY_BASE 0x180000
+
 #define SCPD0		0x0209c /* 915+ only */
 #define IER		0x020a0
 #define IIR		0x020a4
@@ -1495,6 +1498,14 @@
 					 GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \
 					 GEN7_CXT_GT1_SIZE(ctx_reg) + \
 					 GEN7_CXT_VFSTATE_SIZE(ctx_reg))
+#define HSW_CXT_POWER_SIZE(ctx_reg)	((ctx_reg >> 26) & 0x3f)
+#define HSW_CXT_RING_SIZE(ctx_reg)	((ctx_reg >> 23) & 0x7)
+#define HSW_CXT_RENDER_SIZE(ctx_reg)	((ctx_reg >> 15) & 0xff)
+#define HSW_CXT_TOTAL_SIZE(ctx_reg)	(HSW_CXT_POWER_SIZE(ctx_reg) + \
+					 HSW_CXT_RING_SIZE(ctx_reg) + \
+					 HSW_CXT_RENDER_SIZE(ctx_reg) + \
+					 GEN7_CXT_VFSTATE_SIZE(ctx_reg))
+
 
 /*
  * Overlay regs
@@ -1548,12 +1559,35 @@
 
 /* VGA port control */
 #define ADPA			0x61100
+#define PCH_ADPA                0xe1100
+#define VLV_ADPA		(VLV_DISPLAY_BASE + ADPA)
+
 #define   ADPA_DAC_ENABLE	(1<<31)
 #define   ADPA_DAC_DISABLE	0
 #define   ADPA_PIPE_SELECT_MASK	(1<<30)
 #define   ADPA_PIPE_A_SELECT	0
 #define   ADPA_PIPE_B_SELECT	(1<<30)
 #define   ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
+/* CPT uses bits 29:30 for pch transcoder select */
+#define   ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
+#define   ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
+#define   ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
+#define   ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
+#define   ADPA_CRT_HOTPLUG_MONITOR_MONO  (2<<24)
+#define   ADPA_CRT_HOTPLUG_ENABLE        (1<<23)
+#define   ADPA_CRT_HOTPLUG_PERIOD_64     (0<<22)
+#define   ADPA_CRT_HOTPLUG_PERIOD_128    (1<<22)
+#define   ADPA_CRT_HOTPLUG_WARMUP_5MS    (0<<21)
+#define   ADPA_CRT_HOTPLUG_WARMUP_10MS   (1<<21)
+#define   ADPA_CRT_HOTPLUG_SAMPLE_2S     (0<<20)
+#define   ADPA_CRT_HOTPLUG_SAMPLE_4S     (1<<20)
+#define   ADPA_CRT_HOTPLUG_VOLTAGE_40    (0<<18)
+#define   ADPA_CRT_HOTPLUG_VOLTAGE_50    (1<<18)
+#define   ADPA_CRT_HOTPLUG_VOLTAGE_60    (2<<18)
+#define   ADPA_CRT_HOTPLUG_VOLTAGE_70    (3<<18)
+#define   ADPA_CRT_HOTPLUG_VOLREF_325MV  (0<<17)
+#define   ADPA_CRT_HOTPLUG_VOLREF_475MV  (1<<17)
+#define   ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
 #define   ADPA_USE_VGA_HVPOLARITY (1<<15)
 #define   ADPA_SETS_HVPOLARITY	0
 #define   ADPA_VSYNC_CNTL_DISABLE (1<<11)
@@ -3888,31 +3922,6 @@
 #define FDI_PLL_CTL_1           0xfe000
 #define FDI_PLL_CTL_2           0xfe004
 
-/* CRT */
-#define PCH_ADPA                0xe1100
-#define  ADPA_TRANS_SELECT_MASK (1<<30)
-#define  ADPA_TRANS_A_SELECT    0
-#define  ADPA_TRANS_B_SELECT    (1<<30)
-#define  ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
-#define  ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
-#define  ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
-#define  ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
-#define  ADPA_CRT_HOTPLUG_MONITOR_MONO  (2<<24)
-#define  ADPA_CRT_HOTPLUG_ENABLE        (1<<23)
-#define  ADPA_CRT_HOTPLUG_PERIOD_64     (0<<22)
-#define  ADPA_CRT_HOTPLUG_PERIOD_128    (1<<22)
-#define  ADPA_CRT_HOTPLUG_WARMUP_5MS    (0<<21)
-#define  ADPA_CRT_HOTPLUG_WARMUP_10MS   (1<<21)
-#define  ADPA_CRT_HOTPLUG_SAMPLE_2S     (0<<20)
-#define  ADPA_CRT_HOTPLUG_SAMPLE_4S     (1<<20)
-#define  ADPA_CRT_HOTPLUG_VOLTAGE_40    (0<<18)
-#define  ADPA_CRT_HOTPLUG_VOLTAGE_50    (1<<18)
-#define  ADPA_CRT_HOTPLUG_VOLTAGE_60    (2<<18)
-#define  ADPA_CRT_HOTPLUG_VOLTAGE_70    (3<<18)
-#define  ADPA_CRT_HOTPLUG_VOLREF_325MV  (0<<17)
-#define  ADPA_CRT_HOTPLUG_VOLREF_475MV  (1<<17)
-#define  ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
-
 /* or SDVOB */
 #define HDMIB   0xe1140
 #define  PORT_ENABLE    (1 << 31)
@@ -4269,194 +4278,184 @@
 #define   AUD_CONFIG_DISABLE_NCTS		(1 << 3)
 
 /* HSW Power Wells */
-#define HSW_PWR_WELL_CTL1		0x45400		/* BIOS */
-#define HSW_PWR_WELL_CTL2		0x45404		/* Driver */
-#define HSW_PWR_WELL_CTL3		0x45408		/* KVMR */
-#define HSW_PWR_WELL_CTL4		0x4540C		/* Debug */
-#define   HSW_PWR_WELL_ENABLE				(1<<31)
-#define   HSW_PWR_WELL_STATE				(1<<30)
-#define HSW_PWR_WELL_CTL5		0x45410
+#define HSW_PWR_WELL_CTL1			0x45400 /* BIOS */
+#define HSW_PWR_WELL_CTL2			0x45404 /* Driver */
+#define HSW_PWR_WELL_CTL3			0x45408 /* KVMR */
+#define HSW_PWR_WELL_CTL4			0x4540C /* Debug */
+#define   HSW_PWR_WELL_ENABLE			(1<<31)
+#define   HSW_PWR_WELL_STATE			(1<<30)
+#define HSW_PWR_WELL_CTL5			0x45410
 #define   HSW_PWR_WELL_ENABLE_SINGLE_STEP	(1<<31)
 #define   HSW_PWR_WELL_PWR_GATE_OVERRIDE	(1<<20)
-#define   HSW_PWR_WELL_FORCE_ON				(1<<19)
-#define HSW_PWR_WELL_CTL6		0x45414
+#define   HSW_PWR_WELL_FORCE_ON			(1<<19)
+#define HSW_PWR_WELL_CTL6			0x45414
 
 /* Per-pipe DDI Function Control */
-#define PIPE_DDI_FUNC_CTL_A			0x60400
-#define PIPE_DDI_FUNC_CTL_B			0x61400
-#define PIPE_DDI_FUNC_CTL_C			0x62400
+#define PIPE_DDI_FUNC_CTL_A		0x60400
+#define PIPE_DDI_FUNC_CTL_B		0x61400
+#define PIPE_DDI_FUNC_CTL_C		0x62400
 #define PIPE_DDI_FUNC_CTL_EDP		0x6F400
-#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
-					PIPE_DDI_FUNC_CTL_A, \
-					PIPE_DDI_FUNC_CTL_B)
+#define DDI_FUNC_CTL(pipe) _PIPE(pipe, PIPE_DDI_FUNC_CTL_A, \
+				       PIPE_DDI_FUNC_CTL_B)
 #define  PIPE_DDI_FUNC_ENABLE		(1<<31)
 /* Those bits are ignored by pipe EDP since it can only connect to DDI A */
-#define  PIPE_DDI_PORT_MASK			(7<<28)
-#define  PIPE_DDI_SELECT_PORT(x)		((x)<<28)
-#define  PIPE_DDI_MODE_SELECT_HDMI		(0<<24)
-#define  PIPE_DDI_MODE_SELECT_DVI		(1<<24)
+#define  PIPE_DDI_PORT_MASK		(7<<28)
+#define  PIPE_DDI_SELECT_PORT(x)	((x)<<28)
+#define  PIPE_DDI_MODE_SELECT_MASK	(7<<24)
+#define  PIPE_DDI_MODE_SELECT_HDMI	(0<<24)
+#define  PIPE_DDI_MODE_SELECT_DVI	(1<<24)
 #define  PIPE_DDI_MODE_SELECT_DP_SST	(2<<24)
 #define  PIPE_DDI_MODE_SELECT_DP_MST	(3<<24)
-#define  PIPE_DDI_MODE_SELECT_FDI		(4<<24)
-#define  PIPE_DDI_BPC_8					(0<<20)
-#define  PIPE_DDI_BPC_10				(1<<20)
-#define  PIPE_DDI_BPC_6					(2<<20)
-#define  PIPE_DDI_BPC_12				(3<<20)
-#define  PIPE_DDI_BFI_ENABLE			(1<<4)
-#define  PIPE_DDI_PORT_WIDTH_X1			(0<<1)
-#define  PIPE_DDI_PORT_WIDTH_X2			(1<<1)
-#define  PIPE_DDI_PORT_WIDTH_X4			(3<<1)
+#define  PIPE_DDI_MODE_SELECT_FDI	(4<<24)
+#define  PIPE_DDI_BPC_MASK		(7<<20)
+#define  PIPE_DDI_BPC_8			(0<<20)
+#define  PIPE_DDI_BPC_10		(1<<20)
+#define  PIPE_DDI_BPC_6			(2<<20)
+#define  PIPE_DDI_BPC_12		(3<<20)
+#define  PIPE_DDI_PVSYNC		(1<<17)
+#define  PIPE_DDI_PHSYNC		(1<<16)
+#define  PIPE_DDI_BFI_ENABLE		(1<<4)
+#define  PIPE_DDI_PORT_WIDTH_X1		(0<<1)
+#define  PIPE_DDI_PORT_WIDTH_X2		(1<<1)
+#define  PIPE_DDI_PORT_WIDTH_X4		(3<<1)
 
 /* DisplayPort Transport Control */
 #define DP_TP_CTL_A			0x64040
 #define DP_TP_CTL_B			0x64140
-#define DP_TP_CTL(port) _PORT(port, \
-					DP_TP_CTL_A, \
-					DP_TP_CTL_B)
-#define  DP_TP_CTL_ENABLE		(1<<31)
-#define  DP_TP_CTL_MODE_SST	(0<<27)
-#define  DP_TP_CTL_MODE_MST	(1<<27)
+#define DP_TP_CTL(port) _PORT(port, DP_TP_CTL_A, DP_TP_CTL_B)
+#define  DP_TP_CTL_ENABLE			(1<<31)
+#define  DP_TP_CTL_MODE_SST			(0<<27)
+#define  DP_TP_CTL_MODE_MST			(1<<27)
 #define  DP_TP_CTL_ENHANCED_FRAME_ENABLE	(1<<18)
-#define  DP_TP_CTL_FDI_AUTOTRAIN	(1<<15)
+#define  DP_TP_CTL_FDI_AUTOTRAIN		(1<<15)
 #define  DP_TP_CTL_LINK_TRAIN_MASK		(7<<8)
 #define  DP_TP_CTL_LINK_TRAIN_PAT1		(0<<8)
 #define  DP_TP_CTL_LINK_TRAIN_PAT2		(1<<8)
-#define  DP_TP_CTL_LINK_TRAIN_NORMAL	(3<<8)
+#define  DP_TP_CTL_LINK_TRAIN_NORMAL		(3<<8)
 
 /* DisplayPort Transport Status */
 #define DP_TP_STATUS_A			0x64044
 #define DP_TP_STATUS_B			0x64144
-#define DP_TP_STATUS(port) _PORT(port, \
-					DP_TP_STATUS_A, \
-					DP_TP_STATUS_B)
+#define DP_TP_STATUS(port) _PORT(port, DP_TP_STATUS_A, DP_TP_STATUS_B)
 #define  DP_TP_STATUS_AUTOTRAIN_DONE	(1<<12)
 
 /* DDI Buffer Control */
 #define DDI_BUF_CTL_A				0x64000
 #define DDI_BUF_CTL_B				0x64100
-#define DDI_BUF_CTL(port) _PORT(port, \
-					DDI_BUF_CTL_A, \
-					DDI_BUF_CTL_B)
-#define  DDI_BUF_CTL_ENABLE				(1<<31)
+#define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
+#define  DDI_BUF_CTL_ENABLE			(1<<31)
 #define  DDI_BUF_EMP_400MV_0DB_HSW		(0<<24)   /* Sel0 */
-#define  DDI_BUF_EMP_400MV_3_5DB_HSW	(1<<24)   /* Sel1 */
+#define  DDI_BUF_EMP_400MV_3_5DB_HSW		(1<<24)   /* Sel1 */
 #define  DDI_BUF_EMP_400MV_6DB_HSW		(2<<24)   /* Sel2 */
-#define  DDI_BUF_EMP_400MV_9_5DB_HSW	(3<<24)   /* Sel3 */
+#define  DDI_BUF_EMP_400MV_9_5DB_HSW		(3<<24)   /* Sel3 */
 #define  DDI_BUF_EMP_600MV_0DB_HSW		(4<<24)   /* Sel4 */
-#define  DDI_BUF_EMP_600MV_3_5DB_HSW	(5<<24)   /* Sel5 */
+#define  DDI_BUF_EMP_600MV_3_5DB_HSW		(5<<24)   /* Sel5 */
 #define  DDI_BUF_EMP_600MV_6DB_HSW		(6<<24)   /* Sel6 */
 #define  DDI_BUF_EMP_800MV_0DB_HSW		(7<<24)   /* Sel7 */
-#define  DDI_BUF_EMP_800MV_3_5DB_HSW	(8<<24)   /* Sel8 */
-#define  DDI_BUF_EMP_MASK				(0xf<<24)
-#define  DDI_BUF_IS_IDLE				(1<<7)
-#define  DDI_PORT_WIDTH_X1				(0<<1)
-#define  DDI_PORT_WIDTH_X2				(1<<1)
-#define  DDI_PORT_WIDTH_X4				(3<<1)
+#define  DDI_BUF_EMP_800MV_3_5DB_HSW		(8<<24)   /* Sel8 */
+#define  DDI_BUF_EMP_MASK			(0xf<<24)
+#define  DDI_BUF_IS_IDLE			(1<<7)
+#define  DDI_PORT_WIDTH_X1			(0<<1)
+#define  DDI_PORT_WIDTH_X2			(1<<1)
+#define  DDI_PORT_WIDTH_X4			(3<<1)
 #define  DDI_INIT_DISPLAY_DETECTED		(1<<0)
 
 /* DDI Buffer Translations */
 #define DDI_BUF_TRANS_A				0x64E00
 #define DDI_BUF_TRANS_B				0x64E60
-#define DDI_BUF_TRANS(port) _PORT(port, \
-					DDI_BUF_TRANS_A, \
-					DDI_BUF_TRANS_B)
+#define DDI_BUF_TRANS(port) _PORT(port, DDI_BUF_TRANS_A, DDI_BUF_TRANS_B)
 
 /* Sideband Interface (SBI) is programmed indirectly, via
  * SBI_ADDR, which contains the register offset; and SBI_DATA,
  * which contains the payload */
-#define SBI_ADDR				0xC6000
-#define SBI_DATA				0xC6004
+#define SBI_ADDR			0xC6000
+#define SBI_DATA			0xC6004
 #define SBI_CTL_STAT			0xC6008
 #define  SBI_CTL_OP_CRRD		(0x6<<8)
 #define  SBI_CTL_OP_CRWR		(0x7<<8)
 #define  SBI_RESPONSE_FAIL		(0x1<<1)
-#define  SBI_RESPONSE_SUCCESS	(0x0<<1)
-#define  SBI_BUSY				(0x1<<0)
-#define  SBI_READY				(0x0<<0)
+#define  SBI_RESPONSE_SUCCESS		(0x0<<1)
+#define  SBI_BUSY			(0x1<<0)
+#define  SBI_READY			(0x0<<0)
 
 /* SBI offsets */
-#define  SBI_SSCDIVINTPHASE6		0x0600
+#define  SBI_SSCDIVINTPHASE6			0x0600
 #define   SBI_SSCDIVINTPHASE_DIVSEL_MASK	((0x7f)<<1)
 #define   SBI_SSCDIVINTPHASE_DIVSEL(x)		((x)<<1)
 #define   SBI_SSCDIVINTPHASE_INCVAL_MASK	((0x7f)<<8)
 #define   SBI_SSCDIVINTPHASE_INCVAL(x)		((x)<<8)
-#define   SBI_SSCDIVINTPHASE_DIR(x)			((x)<<15)
+#define   SBI_SSCDIVINTPHASE_DIR(x)		((x)<<15)
 #define   SBI_SSCDIVINTPHASE_PROPAGATE		(1<<0)
-#define  SBI_SSCCTL					0x020c
+#define  SBI_SSCCTL				0x020c
 #define  SBI_SSCCTL6				0x060C
-#define   SBI_SSCCTL_DISABLE		(1<<0)
+#define   SBI_SSCCTL_DISABLE			(1<<0)
 #define  SBI_SSCAUXDIV6				0x0610
 #define   SBI_SSCAUXDIV_FINALDIV2SEL(x)		((x)<<4)
-#define  SBI_DBUFF0					0x2a00
+#define  SBI_DBUFF0				0x2a00
 
 /* LPT PIXCLK_GATE */
-#define PIXCLK_GATE				0xC6020
-#define  PIXCLK_GATE_UNGATE		1<<0
-#define  PIXCLK_GATE_GATE		0<<0
+#define PIXCLK_GATE			0xC6020
+#define  PIXCLK_GATE_UNGATE		(1<<0)
+#define  PIXCLK_GATE_GATE		(0<<0)
 
 /* SPLL */
-#define SPLL_CTL				0x46020
+#define SPLL_CTL			0x46020
 #define  SPLL_PLL_ENABLE		(1<<31)
 #define  SPLL_PLL_SCC			(1<<28)
 #define  SPLL_PLL_NON_SCC		(2<<28)
-#define  SPLL_PLL_FREQ_810MHz	(0<<26)
-#define  SPLL_PLL_FREQ_1350MHz	(1<<26)
+#define  SPLL_PLL_FREQ_810MHz		(0<<26)
+#define  SPLL_PLL_FREQ_1350MHz		(1<<26)
 
 /* WRPLL */
-#define WRPLL_CTL1				0x46040
-#define WRPLL_CTL2				0x46060
-#define  WRPLL_PLL_ENABLE				(1<<31)
-#define  WRPLL_PLL_SELECT_SSC			(0x01<<28)
-#define  WRPLL_PLL_SELECT_NON_SCC		(0x02<<28)
+#define WRPLL_CTL1			0x46040
+#define WRPLL_CTL2			0x46060
+#define  WRPLL_PLL_ENABLE		(1<<31)
+#define  WRPLL_PLL_SELECT_SSC		(0x01<<28)
+#define  WRPLL_PLL_SELECT_NON_SCC	(0x02<<28)
 #define  WRPLL_PLL_SELECT_LCPLL_2700	(0x03<<28)
 /* WRPLL divider programming */
-#define  WRPLL_DIVIDER_REFERENCE(x)		((x)<<0)
-#define  WRPLL_DIVIDER_POST(x)			((x)<<8)
-#define  WRPLL_DIVIDER_FEEDBACK(x)		((x)<<16)
+#define  WRPLL_DIVIDER_REFERENCE(x)	((x)<<0)
+#define  WRPLL_DIVIDER_POST(x)		((x)<<8)
+#define  WRPLL_DIVIDER_FEEDBACK(x)	((x)<<16)
 
 /* Port clock selection */
 #define PORT_CLK_SEL_A			0x46100
 #define PORT_CLK_SEL_B			0x46104
-#define PORT_CLK_SEL(port) _PORT(port, \
-					PORT_CLK_SEL_A, \
-					PORT_CLK_SEL_B)
+#define PORT_CLK_SEL(port) _PORT(port, PORT_CLK_SEL_A, PORT_CLK_SEL_B)
 #define  PORT_CLK_SEL_LCPLL_2700	(0<<29)
 #define  PORT_CLK_SEL_LCPLL_1350	(1<<29)
 #define  PORT_CLK_SEL_LCPLL_810		(2<<29)
-#define  PORT_CLK_SEL_SPLL			(3<<29)
+#define  PORT_CLK_SEL_SPLL		(3<<29)
 #define  PORT_CLK_SEL_WRPLL1		(4<<29)
 #define  PORT_CLK_SEL_WRPLL2		(5<<29)
 
 /* Pipe clock selection */
 #define PIPE_CLK_SEL_A			0x46140
 #define PIPE_CLK_SEL_B			0x46144
-#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \
-					PIPE_CLK_SEL_A, \
-					PIPE_CLK_SEL_B)
+#define PIPE_CLK_SEL(pipe) _PIPE(pipe, PIPE_CLK_SEL_A, PIPE_CLK_SEL_B)
 /* For each pipe, we need to select the corresponding port clock */
-#define  PIPE_CLK_SEL_DISABLED	(0x0<<29)
-#define  PIPE_CLK_SEL_PORT(x)	((x+1)<<29)
+#define  PIPE_CLK_SEL_DISABLED		(0x0<<29)
+#define  PIPE_CLK_SEL_PORT(x)		((x+1)<<29)
 
 /* LCPLL Control */
-#define LCPLL_CTL				0x130040
+#define LCPLL_CTL			0x130040
 #define  LCPLL_PLL_DISABLE		(1<<31)
 #define  LCPLL_PLL_LOCK			(1<<30)
-#define  LCPLL_CD_CLOCK_DISABLE	(1<<25)
+#define  LCPLL_CD_CLOCK_DISABLE		(1<<25)
 #define  LCPLL_CD2X_CLOCK_DISABLE	(1<<23)
 
 /* Pipe WM_LINETIME - watermark line time */
 #define PIPE_WM_LINETIME_A		0x45270
 #define PIPE_WM_LINETIME_B		0x45274
-#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \
-					PIPE_WM_LINETIME_A, \
-					PIPE_WM_LINETIME_B)
-#define   PIPE_WM_LINETIME_MASK		(0x1ff)
-#define   PIPE_WM_LINETIME_TIME(x)			((x))
+#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, PIPE_WM_LINETIME_A, \
+					   PIPE_WM_LINETIME_B)
+#define   PIPE_WM_LINETIME_MASK			(0x1ff)
+#define   PIPE_WM_LINETIME_TIME(x)		((x))
 #define   PIPE_WM_LINETIME_IPS_LINETIME_MASK	(0x1ff<<16)
-#define   PIPE_WM_LINETIME_IPS_LINETIME(x)		((x)<<16)
+#define   PIPE_WM_LINETIME_IPS_LINETIME(x)	((x)<<16)
 
 /* SFUSE_STRAP */
-#define SFUSE_STRAP				0xc2014
+#define SFUSE_STRAP			0xc2014
 #define  SFUSE_STRAP_DDIB_DETECTED	(1<<2)
 #define  SFUSE_STRAP_DDIC_DETECTED	(1<<1)
 #define  SFUSE_STRAP_DDID_DETECTED	(1<<0)
diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
index 7631807..c5ee7ee 100644
--- a/drivers/gpu/drm/i915/i915_sysfs.c
+++ b/drivers/gpu/drm/i915/i915_sysfs.c
@@ -213,7 +213,7 @@
 			DRM_ERROR("RC6 residency sysfs setup failed\n");
 	}
 
-	if (IS_IVYBRIDGE(dev)) {
+	if (HAS_L3_GPU_CACHE(dev)) {
 		ret = device_create_bin_file(&dev->primary->kdev, &dpf_attrs);
 		if (ret)
 			DRM_ERROR("l3 parity sysfs setup failed\n");
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 7ed4a41..bc5e2c9 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -47,6 +47,7 @@
 struct intel_crt {
 	struct intel_encoder base;
 	bool force_hotplug_required;
+	u32 adpa_reg;
 };
 
 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
@@ -55,6 +56,11 @@
 			    struct intel_crt, base);
 }
 
+static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
+{
+	return container_of(encoder, struct intel_crt, base);
+}
+
 static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -145,19 +151,15 @@
 
 	struct drm_device *dev = encoder->dev;
 	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crt *crt =
+		intel_encoder_to_crt(to_intel_encoder(encoder));
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int dpll_md_reg;
 	u32 adpa, dpll_md;
-	u32 adpa_reg;
 
 	dpll_md_reg = DPLL_MD(intel_crtc->pipe);
 
-	if (HAS_PCH_SPLIT(dev))
-		adpa_reg = PCH_ADPA;
-	else
-		adpa_reg = ADPA;
-
 	/*
 	 * Disable separate mode multiplier used when cloning SDVO to CRT
 	 * XXX this needs to be adjusted when we really are cloning
@@ -185,7 +187,7 @@
 	if (!HAS_PCH_SPLIT(dev))
 		I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
 
-	I915_WRITE(adpa_reg, adpa);
+	I915_WRITE(crt->adpa_reg, adpa);
 }
 
 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
@@ -658,9 +660,7 @@
 	intel_connector_attach_encoder(intel_connector, &crt->base);
 
 	crt->base.type = INTEL_OUTPUT_ANALOG;
-	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
-				1 << INTEL_ANALOG_CLONE_BIT |
-				1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	crt->base.cloneable = true;
 	if (IS_HASWELL(dev))
 		crt->base.crtc_mask = (1 << 0);
 	else
@@ -677,6 +677,13 @@
 	else
 		encoder_helper_funcs = &gmch_encoder_funcs;
 
+	if (HAS_PCH_SPLIT(dev))
+		crt->adpa_reg = PCH_ADPA;
+	else if (IS_VALLEYVIEW(dev))
+		crt->adpa_reg = VLV_ADPA;
+	else
+		crt->adpa_reg = ADPA;
+
 	drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 933c748..9584226 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -250,7 +250,7 @@
 	case PORT_B:
 	case PORT_C:
 	case PORT_D:
-		intel_hdmi_init(dev, DDI_BUF_CTL(port));
+		intel_hdmi_init(dev, DDI_BUF_CTL(port), port);
 		break;
 	default:
 		DRM_DEBUG_DRIVER("No handlers defined for port %d, skipping DDI initialization\n",
@@ -267,7 +267,8 @@
 	u16 r2;		/* Reference divider */
 };
 
-/* Table of matching values for WRPLL clocks programming for each frequency */
+/* Table of matching values for WRPLL clocks programming for each frequency.
+ * The code assumes this table is sorted. */
 static const struct wrpll_tmds_clock wrpll_tmds_clock_table[] = {
 	{19750,	38,	25,	18},
 	{20000,	48,	32,	18},
@@ -277,7 +278,6 @@
 	{23000,	36,	23,	15},
 	{23500,	40,	40,	23},
 	{23750,	26,	16,	14},
-	{23750,	26,	16,	14},
 	{24000,	36,	24,	15},
 	{25000,	36,	25,	15},
 	{25175,	26,	40,	33},
@@ -437,7 +437,6 @@
 	{108000,	8,	24,	15},
 	{108108,	8,	173,	108},
 	{109000,	6,	23,	19},
-	{109000,	6,	23,	19},
 	{110000,	6,	22,	18},
 	{110013,	6,	22,	18},
 	{110250,	8,	49,	30},
@@ -614,7 +613,6 @@
 	{218250,	4,	42,	26},
 	{218750,	4,	34,	21},
 	{219000,	4,	47,	29},
-	{219000,	4,	47,	29},
 	{220000,	4,	44,	27},
 	{220640,	4,	49,	30},
 	{220750,	4,	36,	22},
@@ -658,7 +656,7 @@
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
 	int port = intel_hdmi->ddi_port;
 	int pipe = intel_crtc->pipe;
-	int p, n2, r2, valid=0;
+	int p, n2, r2;
 	u32 temp, i;
 
 	/* On Haswell, we need to enable the clocks and prepare DDI function to
@@ -666,26 +664,23 @@
 	 */
 	DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe %c\n", port_name(port), pipe_name(pipe));
 
-	for (i=0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++) {
-		if (crtc->mode.clock == wrpll_tmds_clock_table[i].clock) {
-			p = wrpll_tmds_clock_table[i].p;
-			n2 = wrpll_tmds_clock_table[i].n2;
-			r2 = wrpll_tmds_clock_table[i].r2;
-
-			DRM_DEBUG_KMS("WR PLL clock: found settings for %dKHz refresh rate: p=%d, n2=%d, r2=%d\n",
-					crtc->mode.clock,
-					p, n2, r2);
-
-			valid = 1;
+	for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++)
+		if (crtc->mode.clock <= wrpll_tmds_clock_table[i].clock)
 			break;
-		}
-	}
 
-	if (!valid) {
-		DRM_ERROR("Unable to find WR PLL clock settings for %dKHz refresh rate\n",
-				crtc->mode.clock);
-		return;
-	}
+	if (i == ARRAY_SIZE(wrpll_tmds_clock_table))
+		i--;
+
+	p = wrpll_tmds_clock_table[i].p;
+	n2 = wrpll_tmds_clock_table[i].n2;
+	r2 = wrpll_tmds_clock_table[i].r2;
+
+	if (wrpll_tmds_clock_table[i].clock != crtc->mode.clock)
+		DRM_INFO("WR PLL: using settings for %dKHz on %dKHz mode\n",
+			 wrpll_tmds_clock_table[i].clock, crtc->mode.clock);
+
+	DRM_DEBUG_KMS("WR PLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
+		      crtc->mode.clock, p, n2, r2);
 
 	/* Enable LCPLL if disabled */
 	temp = I915_READ(LCPLL_CTL);
@@ -723,15 +718,35 @@
 	}
 
 	/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
-	temp = I915_READ(DDI_FUNC_CTL(pipe));
-	temp &= ~PIPE_DDI_PORT_MASK;
-	temp &= ~PIPE_DDI_BPC_12;
-	temp |= PIPE_DDI_SELECT_PORT(port) |
-			PIPE_DDI_MODE_SELECT_HDMI |
-			((intel_crtc->bpp > 24) ?
-				PIPE_DDI_BPC_12 :
-				PIPE_DDI_BPC_8) |
-			PIPE_DDI_FUNC_ENABLE;
+	temp = PIPE_DDI_FUNC_ENABLE | PIPE_DDI_SELECT_PORT(port);
+
+	switch (intel_crtc->bpp) {
+	case 18:
+		temp |= PIPE_DDI_BPC_6;
+		break;
+	case 24:
+		temp |= PIPE_DDI_BPC_8;
+		break;
+	case 30:
+		temp |= PIPE_DDI_BPC_10;
+		break;
+	case 36:
+		temp |= PIPE_DDI_BPC_12;
+		break;
+	default:
+		WARN(1, "%d bpp unsupported by pipe DDI function\n",
+		     intel_crtc->bpp);
+	}
+
+	if (intel_hdmi->has_hdmi_sink)
+		temp |= PIPE_DDI_MODE_SELECT_HDMI;
+	else
+		temp |= PIPE_DDI_MODE_SELECT_DVI;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		temp |= PIPE_DDI_PVSYNC;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		temp |= PIPE_DDI_PHSYNC;
 
 	I915_WRITE(DDI_FUNC_CTL(pipe), temp);
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a69a3d0..a9ab1af 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1429,8 +1429,10 @@
  * protect mechanism may be enabled.
  *
  * Note!  This is for pre-ILK only.
+ *
+ * Unfortunately needed by dvo_ns2501 since the dvo depends on it running.
  */
-static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 {
 	int reg;
 	u32 val;
@@ -2836,13 +2838,13 @@
 static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
-	struct intel_encoder *encoder;
+	struct intel_encoder *intel_encoder;
 
 	/*
 	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
 	 * must be driven by its own crtc; no sharing is possible.
 	 */
-	for_each_encoder_on_crtc(dev, crtc, encoder) {
+	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
 
 		/* On Haswell, LPT PCH handles the VGA connection via FDI, and Haswell
 		 * CPU handles all others */
@@ -2850,19 +2852,19 @@
 			/* It is still unclear how this will work on PPT, so throw up a warning */
 			WARN_ON(!HAS_PCH_LPT(dev));
 
-			if (encoder->type == DRM_MODE_ENCODER_DAC) {
+			if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
 				DRM_DEBUG_KMS("Haswell detected DAC encoder, assuming is PCH\n");
 				return true;
 			} else {
 				DRM_DEBUG_KMS("Haswell detected encoder %d, assuming is CPU\n",
-						encoder->type);
+					      intel_encoder->type);
 				return false;
 			}
 		}
 
-		switch (encoder->type) {
+		switch (intel_encoder->type) {
 		case INTEL_OUTPUT_EDP:
-			if (!intel_encoder_is_pch_edp(&encoder->base))
+			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
 				return false;
 			continue;
 		}
@@ -5848,46 +5850,6 @@
 	return mode;
 }
 
-#define GPU_IDLE_TIMEOUT 500 /* ms */
-
-/* When this timer fires, we've been idle for awhile */
-static void intel_gpu_idle_timer(unsigned long arg)
-{
-	struct drm_device *dev = (struct drm_device *)arg;
-	drm_i915_private_t *dev_priv = dev->dev_private;
-
-	if (!list_empty(&dev_priv->mm.active_list)) {
-		/* Still processing requests, so just re-arm the timer. */
-		mod_timer(&dev_priv->idle_timer, jiffies +
-			  msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-		return;
-	}
-
-	dev_priv->busy = false;
-	queue_work(dev_priv->wq, &dev_priv->idle_work);
-}
-
-#define CRTC_IDLE_TIMEOUT 1000 /* ms */
-
-static void intel_crtc_idle_timer(unsigned long arg)
-{
-	struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
-	struct drm_crtc *crtc = &intel_crtc->base;
-	drm_i915_private_t *dev_priv = crtc->dev->dev_private;
-	struct intel_framebuffer *intel_fb;
-
-	intel_fb = to_intel_framebuffer(crtc->fb);
-	if (intel_fb && intel_fb->obj->active) {
-		/* The framebuffer is still being accessed by the GPU. */
-		mod_timer(&intel_crtc->idle_timer, jiffies +
-			  msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
-		return;
-	}
-
-	intel_crtc->busy = false;
-	queue_work(dev_priv->wq, &dev_priv->idle_work);
-}
-
 static void intel_increase_pllclock(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -5917,10 +5879,6 @@
 		if (dpll & DISPLAY_RATE_SELECT_FPA1)
 			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
 	}
-
-	/* Schedule downclock */
-	mod_timer(&intel_crtc->idle_timer, jiffies +
-		  msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
 }
 
 static void intel_decrease_pllclock(struct drm_crtc *crtc)
@@ -5959,89 +5917,46 @@
 
 }
 
-/**
- * intel_idle_update - adjust clocks for idleness
- * @work: work struct
- *
- * Either the GPU or display (or both) went idle.  Check the busy status
- * here and adjust the CRTC and GPU clocks as necessary.
- */
-static void intel_idle_update(struct work_struct *work)
+void intel_mark_busy(struct drm_device *dev)
 {
-	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
-						    idle_work);
-	struct drm_device *dev = dev_priv->dev;
+	i915_update_gfx_val(dev->dev_private);
+}
+
+void intel_mark_idle(struct drm_device *dev)
+{
+}
+
+void intel_mark_fb_busy(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
 	struct drm_crtc *crtc;
-	struct intel_crtc *intel_crtc;
 
 	if (!i915_powersave)
 		return;
 
-	mutex_lock(&dev->struct_mutex);
-
-	i915_update_gfx_val(dev_priv);
-
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		/* Skip inactive CRTCs */
 		if (!crtc->fb)
 			continue;
 
-		intel_crtc = to_intel_crtc(crtc);
-		if (!intel_crtc->busy)
-			intel_decrease_pllclock(crtc);
+		if (to_intel_framebuffer(crtc->fb)->obj == obj)
+			intel_increase_pllclock(crtc);
 	}
-
-
-	mutex_unlock(&dev->struct_mutex);
 }
 
-/**
- * intel_mark_busy - mark the GPU and possibly the display busy
- * @dev: drm device
- * @obj: object we're operating on
- *
- * Callers can use this function to indicate that the GPU is busy processing
- * commands.  If @obj matches one of the CRTC objects (i.e. it's a scanout
- * buffer), we'll also mark the display as busy, so we know to increase its
- * clock frequency.
- */
-void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
+void intel_mark_fb_idle(struct drm_i915_gem_object *obj)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc = NULL;
-	struct intel_framebuffer *intel_fb;
-	struct intel_crtc *intel_crtc;
+	struct drm_device *dev = obj->base.dev;
+	struct drm_crtc *crtc;
 
-	if (!drm_core_check_feature(dev, DRIVER_MODESET))
-		return;
-
-	if (!dev_priv->busy) {
-		intel_sanitize_pm(dev);
-		dev_priv->busy = true;
-	} else
-		mod_timer(&dev_priv->idle_timer, jiffies +
-			  msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-
-	if (obj == NULL)
+	if (!i915_powersave)
 		return;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (!crtc->fb)
 			continue;
 
-		intel_crtc = to_intel_crtc(crtc);
-		intel_fb = to_intel_framebuffer(crtc->fb);
-		if (intel_fb->obj == obj) {
-			if (!intel_crtc->busy) {
-				/* Non-busy -> busy, upclock */
-				intel_increase_pllclock(crtc);
-				intel_crtc->busy = true;
-			} else {
-				/* Busy -> busy, put off timer */
-				mod_timer(&intel_crtc->idle_timer, jiffies +
-					  msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
-			}
-		}
+		if (to_intel_framebuffer(crtc->fb)->obj == obj)
+			intel_decrease_pllclock(crtc);
 	}
 }
 
@@ -6392,7 +6307,7 @@
 	default:
 		WARN_ONCE(1, "unknown plane in flip command\n");
 		ret = -ENODEV;
-		goto err;
+		goto err_unpin;
 	}
 
 	ret = intel_ring_begin(ring, 4);
@@ -6500,7 +6415,7 @@
 		goto cleanup_pending;
 
 	intel_disable_fbc(dev);
-	intel_mark_busy(dev, obj);
+	intel_mark_fb_busy(obj);
 	mutex_unlock(&dev->struct_mutex);
 
 	trace_i915_flip_request(intel_crtc->plane, obj);
@@ -6666,11 +6581,6 @@
 	}
 
 	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
-
-	intel_crtc->busy = false;
-
-	setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
-		    (unsigned long)intel_crtc);
 }
 
 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
@@ -6697,15 +6607,23 @@
 	return 0;
 }
 
-static int intel_encoder_clones(struct drm_device *dev, int type_mask)
+static int intel_encoder_clones(struct intel_encoder *encoder)
 {
-	struct intel_encoder *encoder;
+	struct drm_device *dev = encoder->base.dev;
+	struct intel_encoder *source_encoder;
 	int index_mask = 0;
 	int entry = 0;
 
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
-		if (type_mask & encoder->clone_mask)
+	list_for_each_entry(source_encoder,
+			    &dev->mode_config.encoder_list, base.head) {
+
+		if (encoder == source_encoder)
 			index_mask |= (1 << entry);
+
+		/* Intel hw has only one MUX where enocoders could be cloned. */
+		if (encoder->cloneable && source_encoder->cloneable)
+			index_mask |= (1 << entry);
+
 		entry++;
 	}
 
@@ -6746,10 +6664,10 @@
 		dpd_is_edp = intel_dpd_is_edp(dev);
 
 		if (has_edp_a(dev))
-			intel_dp_init(dev, DP_A);
+			intel_dp_init(dev, DP_A, PORT_A);
 
 		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
-			intel_dp_init(dev, PCH_DP_D);
+			intel_dp_init(dev, PCH_DP_D, PORT_D);
 	}
 
 	intel_crt_init(dev);
@@ -6780,22 +6698,22 @@
 			/* PCH SDVOB multiplex with HDMIB */
 			found = intel_sdvo_init(dev, PCH_SDVOB, true);
 			if (!found)
-				intel_hdmi_init(dev, HDMIB);
+				intel_hdmi_init(dev, HDMIB, PORT_B);
 			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
-				intel_dp_init(dev, PCH_DP_B);
+				intel_dp_init(dev, PCH_DP_B, PORT_B);
 		}
 
 		if (I915_READ(HDMIC) & PORT_DETECTED)
-			intel_hdmi_init(dev, HDMIC);
+			intel_hdmi_init(dev, HDMIC, PORT_C);
 
 		if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
-			intel_hdmi_init(dev, HDMID);
+			intel_hdmi_init(dev, HDMID, PORT_D);
 
 		if (I915_READ(PCH_DP_C) & DP_DETECTED)
-			intel_dp_init(dev, PCH_DP_C);
+			intel_dp_init(dev, PCH_DP_C, PORT_C);
 
 		if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
-			intel_dp_init(dev, PCH_DP_D);
+			intel_dp_init(dev, PCH_DP_D, PORT_D);
 	} else if (IS_VALLEYVIEW(dev)) {
 		int found;
 
@@ -6803,17 +6721,17 @@
 			/* SDVOB multiplex with HDMIB */
 			found = intel_sdvo_init(dev, SDVOB, true);
 			if (!found)
-				intel_hdmi_init(dev, SDVOB);
+				intel_hdmi_init(dev, SDVOB, PORT_B);
 			if (!found && (I915_READ(DP_B) & DP_DETECTED))
-				intel_dp_init(dev, DP_B);
+				intel_dp_init(dev, DP_B, PORT_B);
 		}
 
 		if (I915_READ(SDVOC) & PORT_DETECTED)
-			intel_hdmi_init(dev, SDVOC);
+			intel_hdmi_init(dev, SDVOC, PORT_C);
 
 		/* Shares lanes with HDMI on SDVOC */
 		if (I915_READ(DP_C) & DP_DETECTED)
-			intel_dp_init(dev, DP_C);
+			intel_dp_init(dev, DP_C, PORT_C);
 	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
 		bool found = false;
 
@@ -6822,12 +6740,12 @@
 			found = intel_sdvo_init(dev, SDVOB, true);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
 				DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
-				intel_hdmi_init(dev, SDVOB);
+				intel_hdmi_init(dev, SDVOB, PORT_B);
 			}
 
 			if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
 				DRM_DEBUG_KMS("probing DP_B\n");
-				intel_dp_init(dev, DP_B);
+				intel_dp_init(dev, DP_B, PORT_B);
 			}
 		}
 
@@ -6842,18 +6760,18 @@
 
 			if (SUPPORTS_INTEGRATED_HDMI(dev)) {
 				DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
-				intel_hdmi_init(dev, SDVOC);
+				intel_hdmi_init(dev, SDVOC, PORT_C);
 			}
 			if (SUPPORTS_INTEGRATED_DP(dev)) {
 				DRM_DEBUG_KMS("probing DP_C\n");
-				intel_dp_init(dev, DP_C);
+				intel_dp_init(dev, DP_C, PORT_C);
 			}
 		}
 
 		if (SUPPORTS_INTEGRATED_DP(dev) &&
 		    (I915_READ(DP_D) & DP_DETECTED)) {
 			DRM_DEBUG_KMS("probing DP_D\n");
-			intel_dp_init(dev, DP_D);
+			intel_dp_init(dev, DP_D, PORT_D);
 		}
 	} else if (IS_GEN2(dev))
 		intel_dvo_init(dev);
@@ -6864,7 +6782,7 @@
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
 		encoder->base.possible_crtcs = encoder->crtc_mask;
 		encoder->base.possible_clones =
-			intel_encoder_clones(dev, encoder->clone_mask);
+			intel_encoder_clones(encoder);
 	}
 
 	/* disable all the possible outputs/crtcs before entering KMS mode */
@@ -7229,10 +7147,6 @@
 	/* Just disable it once at startup */
 	i915_disable_vga(dev);
 	intel_setup_outputs(dev);
-
-	INIT_WORK(&dev_priv->idle_work, intel_idle_update);
-	setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
-		    (unsigned long)dev);
 }
 
 void intel_modeset_gem_init(struct drm_device *dev)
@@ -7278,19 +7192,11 @@
 	 * enqueue unpin/hotplug work. */
 	drm_irq_uninstall(dev);
 	cancel_work_sync(&dev_priv->hotplug_work);
-	cancel_work_sync(&dev_priv->rps_work);
+	cancel_work_sync(&dev_priv->rps.work);
 
 	/* flush any delayed tasks or pending work */
 	flush_scheduled_work();
 
-	/* Shut off idle work before the crtcs get freed. */
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		intel_crtc = to_intel_crtc(crtc);
-		del_timer_sync(&intel_crtc->idle_timer);
-	}
-	del_timer_sync(&dev_priv->idle_timer);
-	cancel_work_sync(&dev_priv->idle_work);
-
 	drm_mode_config_cleanup(dev);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a6c426a..977d9d2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -36,42 +36,10 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
-#include "drm_dp_helper.h"
 
-#define DP_RECEIVER_CAP_SIZE	0xf
 #define DP_LINK_STATUS_SIZE	6
 #define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
 
-#define DP_LINK_CONFIGURATION_SIZE	9
-
-struct intel_dp {
-	struct intel_encoder base;
-	uint32_t output_reg;
-	uint32_t DP;
-	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
-	bool has_audio;
-	enum hdmi_force_audio force_audio;
-	uint32_t color_range;
-	int dpms_mode;
-	uint8_t link_bw;
-	uint8_t lane_count;
-	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
-	struct i2c_adapter adapter;
-	struct i2c_algo_dp_aux_data algo;
-	bool is_pch_edp;
-	uint8_t	train_set[4];
-	int panel_power_up_delay;
-	int panel_power_down_delay;
-	int panel_power_cycle_delay;
-	int backlight_on_delay;
-	int backlight_off_delay;
-	struct drm_display_mode *panel_fixed_mode;  /* for eDP */
-	struct delayed_work panel_vdd_work;
-	bool want_panel_vdd;
-	struct edid *edid; /* cached EDID for eDP */
-	int edid_mode_count;
-};
-
 /**
  * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
  * @intel_dp: DP struct
@@ -1668,6 +1636,45 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int ret;
 
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
+		dp_reg_value &= ~DP_LINK_TRAIN_MASK_CPT;
+
+		switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+		case DP_TRAINING_PATTERN_DISABLE:
+			dp_reg_value |= DP_LINK_TRAIN_OFF_CPT;
+			break;
+		case DP_TRAINING_PATTERN_1:
+			dp_reg_value |= DP_LINK_TRAIN_PAT_1_CPT;
+			break;
+		case DP_TRAINING_PATTERN_2:
+			dp_reg_value |= DP_LINK_TRAIN_PAT_2_CPT;
+			break;
+		case DP_TRAINING_PATTERN_3:
+			DRM_ERROR("DP training pattern 3 not supported\n");
+			dp_reg_value |= DP_LINK_TRAIN_PAT_2_CPT;
+			break;
+		}
+
+	} else {
+		dp_reg_value &= ~DP_LINK_TRAIN_MASK;
+
+		switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+		case DP_TRAINING_PATTERN_DISABLE:
+			dp_reg_value |= DP_LINK_TRAIN_OFF;
+			break;
+		case DP_TRAINING_PATTERN_1:
+			dp_reg_value |= DP_LINK_TRAIN_PAT_1;
+			break;
+		case DP_TRAINING_PATTERN_2:
+			dp_reg_value |= DP_LINK_TRAIN_PAT_2;
+			break;
+		case DP_TRAINING_PATTERN_3:
+			DRM_ERROR("DP training pattern 3 not supported\n");
+			dp_reg_value |= DP_LINK_TRAIN_PAT_2;
+			break;
+		}
+	}
+
 	I915_WRITE(intel_dp->output_reg, dp_reg_value);
 	POSTING_READ(intel_dp->output_reg);
 
@@ -1675,12 +1682,15 @@
 				    DP_TRAINING_PATTERN_SET,
 				    dp_train_pat);
 
-	ret = intel_dp_aux_native_write(intel_dp,
-					DP_TRAINING_LANE0_SET,
-					intel_dp->train_set,
-					intel_dp->lane_count);
-	if (ret != intel_dp->lane_count)
-		return false;
+	if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) !=
+	    DP_TRAINING_PATTERN_DISABLE) {
+		ret = intel_dp_aux_native_write(intel_dp,
+						DP_TRAINING_LANE0_SET,
+						intel_dp->train_set,
+						intel_dp->lane_count);
+		if (ret != intel_dp->lane_count)
+			return false;
+	}
 
 	return true;
 }
@@ -1696,7 +1706,6 @@
 	uint8_t voltage;
 	bool clock_recovery = false;
 	int voltage_tries, loop_tries;
-	u32 reg;
 	uint32_t DP = intel_dp->DP;
 
 	/*
@@ -1717,10 +1726,6 @@
 
 	DP |= DP_PORT_EN;
 
-	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
-		DP &= ~DP_LINK_TRAIN_MASK_CPT;
-	else
-		DP &= ~DP_LINK_TRAIN_MASK;
 	memset(intel_dp->train_set, 0, 4);
 	voltage = 0xff;
 	voltage_tries = 0;
@@ -1744,12 +1749,7 @@
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
-		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
-			reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
-		else
-			reg = DP | DP_LINK_TRAIN_PAT_1;
-
-		if (!intel_dp_set_link_train(intel_dp, reg,
+		if (!intel_dp_set_link_train(intel_dp, DP,
 					     DP_TRAINING_PATTERN_1 |
 					     DP_LINK_SCRAMBLING_DISABLE))
 			break;
@@ -1804,10 +1804,8 @@
 intel_dp_complete_link_train(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	bool channel_eq = false;
 	int tries, cr_tries;
-	u32 reg;
 	uint32_t DP = intel_dp->DP;
 
 	/* channel equalization */
@@ -1836,13 +1834,8 @@
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
-		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
-			reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
-		else
-			reg = DP | DP_LINK_TRAIN_PAT_2;
-
 		/* channel eq pattern */
-		if (!intel_dp_set_link_train(intel_dp, reg,
+		if (!intel_dp_set_link_train(intel_dp, DP,
 					     DP_TRAINING_PATTERN_2 |
 					     DP_LINK_SCRAMBLING_DISABLE))
 			break;
@@ -1877,15 +1870,7 @@
 		++tries;
 	}
 
-	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
-		reg = DP | DP_LINK_TRAIN_OFF_CPT;
-	else
-		reg = DP | DP_LINK_TRAIN_OFF;
-
-	I915_WRITE(intel_dp->output_reg, reg);
-	POSTING_READ(intel_dp->output_reg);
-	intel_dp_aux_native_write_1(intel_dp,
-				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+	intel_dp_set_link_train(intel_dp, DP, DP_TRAINING_PATTERN_DISABLE);
 }
 
 static void
@@ -2441,7 +2426,7 @@
 }
 
 void
-intel_dp_init(struct drm_device *dev, int output_reg)
+intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_connector *connector;
@@ -2456,6 +2441,7 @@
 		return;
 
 	intel_dp->output_reg = output_reg;
+	intel_dp->port = port;
 	intel_dp->dpms_mode = -1;
 
 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
@@ -2483,18 +2469,10 @@
 
 	connector->polled = DRM_CONNECTOR_POLL_HPD;
 
-	if (output_reg == DP_B || output_reg == PCH_DP_B)
-		intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
-	else if (output_reg == DP_C || output_reg == PCH_DP_C)
-		intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
-	else if (output_reg == DP_D || output_reg == PCH_DP_D)
-		intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+	intel_encoder->cloneable = false;
 
-	if (is_edp(intel_dp)) {
-		intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
-		INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
-				  ironlake_panel_vdd_work);
-	}
+	INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
+			  ironlake_panel_vdd_work);
 
 	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
 
@@ -2509,28 +2487,25 @@
 	drm_sysfs_connector_add(connector);
 
 	/* Set up the DDC bus. */
-	switch (output_reg) {
-		case DP_A:
-			name = "DPDDC-A";
-			break;
-		case DP_B:
-		case PCH_DP_B:
-			dev_priv->hotplug_supported_mask |=
-				DPB_HOTPLUG_INT_STATUS;
-			name = "DPDDC-B";
-			break;
-		case DP_C:
-		case PCH_DP_C:
-			dev_priv->hotplug_supported_mask |=
-				DPC_HOTPLUG_INT_STATUS;
-			name = "DPDDC-C";
-			break;
-		case DP_D:
-		case PCH_DP_D:
-			dev_priv->hotplug_supported_mask |=
-				DPD_HOTPLUG_INT_STATUS;
-			name = "DPDDC-D";
-			break;
+	switch (port) {
+	case PORT_A:
+		name = "DPDDC-A";
+		break;
+	case PORT_B:
+		dev_priv->hotplug_supported_mask |= DPB_HOTPLUG_INT_STATUS;
+		name = "DPDDC-B";
+		break;
+	case PORT_C:
+		dev_priv->hotplug_supported_mask |= DPC_HOTPLUG_INT_STATUS;
+		name = "DPDDC-C";
+		break;
+	case PORT_D:
+		dev_priv->hotplug_supported_mask |= DPD_HOTPLUG_INT_STATUS;
+		name = "DPDDC-D";
+		break;
+	default:
+		WARN(1, "Invalid port %c\n", port_name(port));
+		break;
 	}
 
 	intel_dp_i2c_init(intel_dp, intel_connector, name);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 132ab51..6920bc2 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -31,6 +31,7 @@
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
 #include "drm_fb_helper.h"
+#include "drm_dp_helper.h"
 
 #define _wait_for(COND, MS, W) ({ \
 	unsigned long timeout__ = jiffies + msecs_to_jiffies(MS);	\
@@ -90,25 +91,6 @@
 #define INTEL_OUTPUT_DISPLAYPORT 7
 #define INTEL_OUTPUT_EDP 8
 
-/* Intel Pipe Clone Bit */
-#define INTEL_HDMIB_CLONE_BIT 1
-#define INTEL_HDMIC_CLONE_BIT 2
-#define INTEL_HDMID_CLONE_BIT 3
-#define INTEL_HDMIE_CLONE_BIT 4
-#define INTEL_HDMIF_CLONE_BIT 5
-#define INTEL_SDVO_NON_TV_CLONE_BIT 6
-#define INTEL_SDVO_TV_CLONE_BIT 7
-#define INTEL_SDVO_LVDS_CLONE_BIT 8
-#define INTEL_ANALOG_CLONE_BIT 9
-#define INTEL_TV_CLONE_BIT 10
-#define INTEL_DP_B_CLONE_BIT 11
-#define INTEL_DP_C_CLONE_BIT 12
-#define INTEL_DP_D_CLONE_BIT 13
-#define INTEL_LVDS_CLONE_BIT 14
-#define INTEL_DVO_TMDS_CLONE_BIT 15
-#define INTEL_DVO_LVDS_CLONE_BIT 16
-#define INTEL_EDP_CLONE_BIT 17
-
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
 #define INTEL_DVO_CHIP_TMDS 2
@@ -153,9 +135,13 @@
 	struct drm_encoder base;
 	int type;
 	bool needs_tv_clock;
+	/*
+	 * Intel hw has only one MUX where encoders could be clone, hence a
+	 * simple flag is enough to compute the possible_clones mask.
+	 */
+	bool cloneable;
 	void (*hot_plug)(struct intel_encoder *);
 	int crtc_mask;
-	int clone_mask;
 };
 
 struct intel_connector {
@@ -171,8 +157,6 @@
 	int dpms_mode;
 	bool active; /* is the crtc on? independent of the dpms mode */
 	bool primary_disabled; /* is the crtc obscured by a plane? */
-	bool busy; /* is scanout buffer being updated frequently? */
-	struct timer_list idle_timer;
 	bool lowfreq_avail;
 	struct intel_overlay *overlay;
 	struct intel_unpin_work *unpin_work;
@@ -311,6 +295,38 @@
 			       struct drm_display_mode *adjusted_mode);
 };
 
+#define DP_RECEIVER_CAP_SIZE		0xf
+#define DP_LINK_CONFIGURATION_SIZE	9
+
+struct intel_dp {
+	struct intel_encoder base;
+	uint32_t output_reg;
+	uint32_t DP;
+	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	bool has_audio;
+	enum hdmi_force_audio force_audio;
+	enum port port;
+	uint32_t color_range;
+	int dpms_mode;
+	uint8_t link_bw;
+	uint8_t lane_count;
+	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
+	struct i2c_adapter adapter;
+	struct i2c_algo_dp_aux_data algo;
+	bool is_pch_edp;
+	uint8_t train_set[4];
+	int panel_power_up_delay;
+	int panel_power_down_delay;
+	int panel_power_cycle_delay;
+	int backlight_on_delay;
+	int backlight_off_delay;
+	struct drm_display_mode *panel_fixed_mode;  /* for eDP */
+	struct delayed_work panel_vdd_work;
+	bool want_panel_vdd;
+	struct edid *edid; /* cached EDID for eDP */
+	int edid_mode_count;
+};
+
 static inline struct drm_crtc *
 intel_get_crtc_for_pipe(struct drm_device *dev, int pipe)
 {
@@ -348,17 +364,21 @@
 extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
 
 extern void intel_crt_init(struct drm_device *dev);
-extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
+extern void intel_hdmi_init(struct drm_device *dev,
+			    int sdvox_reg, enum port port);
 extern struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
 extern void intel_dip_infoframe_csum(struct dip_infoframe *avi_if);
 extern bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg,
 			    bool is_sdvob);
 extern void intel_dvo_init(struct drm_device *dev);
 extern void intel_tv_init(struct drm_device *dev);
-extern void intel_mark_busy(struct drm_device *dev,
-			    struct drm_i915_gem_object *obj);
+extern void intel_mark_busy(struct drm_device *dev);
+extern void intel_mark_idle(struct drm_device *dev);
+extern void intel_mark_fb_busy(struct drm_i915_gem_object *obj);
+extern void intel_mark_fb_idle(struct drm_i915_gem_object *obj);
 extern bool intel_lvds_init(struct drm_device *dev);
-extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+extern void intel_dp_init(struct drm_device *dev, int output_reg,
+			  enum port port);
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode);
@@ -371,8 +391,6 @@
 extern void intel_flush_display_plane(struct drm_i915_private *dev_priv,
 				      enum plane plane);
 
-void intel_sanitize_pm(struct drm_device *dev);
-
 /* intel_panel.c */
 extern void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 				   struct drm_display_mode *adjusted_mode);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 36c542e..03dfdff 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -37,6 +37,7 @@
 #define SIL164_ADDR	0x38
 #define CH7xxx_ADDR	0x76
 #define TFP410_ADDR	0x38
+#define NS2501_ADDR     0x38
 
 static const struct intel_dvo_device intel_dvo_devices[] = {
 	{
@@ -74,7 +75,14 @@
 		.slave_addr = 0x75,
 		.gpio = GMBUS_PORT_DPB,
 		.dev_ops = &ch7017_ops,
-	}
+	},
+	{
+	        .type = INTEL_DVO_CHIP_TMDS,
+		.name = "ns2501",
+		.dvo_reg = DVOC,
+		.slave_addr = NS2501_ADDR,
+		.dev_ops = &ns2501_ops,
+       }
 };
 
 struct intel_dvo {
@@ -396,17 +404,14 @@
 		intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 		switch (dvo->type) {
 		case INTEL_DVO_CHIP_TMDS:
-			intel_encoder->clone_mask =
-				(1 << INTEL_DVO_TMDS_CLONE_BIT) |
-				(1 << INTEL_ANALOG_CLONE_BIT);
+			intel_encoder->cloneable = true;
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
 					   DRM_MODE_CONNECTOR_DVII);
 			encoder_type = DRM_MODE_ENCODER_TMDS;
 			break;
 		case INTEL_DVO_CHIP_LVDS:
-			intel_encoder->clone_mask =
-				(1 << INTEL_DVO_LVDS_CLONE_BIT);
+			intel_encoder->cloneable = false;
 			drm_connector_init(dev, connector,
 					   &intel_dvo_connector_funcs,
 					   DRM_MODE_CONNECTOR_LVDS);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 98f6024..e4c37bb 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -889,7 +889,7 @@
 	intel_attach_broadcast_rgb_property(connector);
 }
 
-void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
+void intel_hdmi_init(struct drm_device *dev, int sdvox_reg, enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_connector *connector;
@@ -923,48 +923,25 @@
 	connector->doublescan_allowed = 0;
 	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
 
-	/* Set up the DDC bus. */
-	if (sdvox_reg == SDVOB) {
-		intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
+	intel_encoder->cloneable = false;
+
+	intel_hdmi->ddi_port = port;
+	switch (port) {
+	case PORT_B:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
 		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == SDVOC) {
-		intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
+		break;
+	case PORT_C:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
 		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == HDMIB) {
-		intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
-		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
-		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == HDMIC) {
-		intel_encoder->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
-		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
-		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == HDMID) {
-		intel_encoder->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
+		break;
+	case PORT_D:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
 		dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == DDI_BUF_CTL(PORT_B)) {
-		DRM_DEBUG_DRIVER("LPT: detected output on DDI B\n");
-		intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
-		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
-		intel_hdmi->ddi_port = PORT_B;
-		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == DDI_BUF_CTL(PORT_C)) {
-		DRM_DEBUG_DRIVER("LPT: detected output on DDI C\n");
-		intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
-		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
-		intel_hdmi->ddi_port = PORT_C;
-		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
-	} else if (sdvox_reg == DDI_BUF_CTL(PORT_D)) {
-		DRM_DEBUG_DRIVER("LPT: detected output on DDI D\n");
-		intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
-		intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
-		intel_hdmi->ddi_port = PORT_D;
-		dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
-	} else {
-		/* If we got an unknown sdvox_reg, things are pretty much broken
-		 * in a way that we should let the kernel know about it */
+		break;
+	case PORT_A:
+		/* Internal port only for eDP. */
+	default:
 		BUG();
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e05c0d3..d789fdad 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -967,7 +967,7 @@
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	intel_encoder->type = INTEL_OUTPUT_LVDS;
 
-	intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+	intel_encoder->cloneable = false;
 	if (HAS_PCH_SPLIT(dev))
 		intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
 	else if (IS_GEN4(dev))
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 58c07cd..c0407aa 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2160,11 +2160,28 @@
 	return NULL;
 }
 
+/**
+ * Lock protecting IPS related data structures
+ *   - i915_mch_dev
+ *   - dev_priv->max_delay
+ *   - dev_priv->min_delay
+ *   - dev_priv->fmax
+ *   - dev_priv->gpu_busy
+ *   - dev_priv->gfx_power
+ */
+DEFINE_SPINLOCK(mchdev_lock);
+
+/* Global for IPS driver to get at the current i915 device. Protected by
+ * mchdev_lock. */
+static struct drm_i915_private *i915_mch_dev;
+
 bool ironlake_set_drps(struct drm_device *dev, u8 val)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u16 rgvswctl;
 
+	assert_spin_locked(&mchdev_lock);
+
 	rgvswctl = I915_READ16(MEMSWCTL);
 	if (rgvswctl & MEMCTL_CMD_STS) {
 		DRM_DEBUG("gpu busy, RCS change rejected\n");
@@ -2188,6 +2205,8 @@
 	u32 rgvmodectl = I915_READ(MEMMODECTL);
 	u8 fmax, fmin, fstart, vstart;
 
+	spin_lock_irq(&mchdev_lock);
+
 	/* Enable temp reporting */
 	I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
 	I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
@@ -2233,9 +2252,9 @@
 	rgvmodectl |= MEMMODE_SWMODE_EN;
 	I915_WRITE(MEMMODECTL, rgvmodectl);
 
-	if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
+	if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
 		DRM_ERROR("stuck trying to change perf mode\n");
-	msleep(1);
+	mdelay(1);
 
 	ironlake_set_drps(dev, fstart);
 
@@ -2244,12 +2263,18 @@
 	dev_priv->last_time1 = jiffies_to_msecs(jiffies);
 	dev_priv->last_count2 = I915_READ(0x112f4);
 	getrawmonotonic(&dev_priv->last_time2);
+
+	spin_unlock_irq(&mchdev_lock);
 }
 
 static void ironlake_disable_drps(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u16 rgvswctl = I915_READ16(MEMSWCTL);
+	u16 rgvswctl;
+
+	spin_lock_irq(&mchdev_lock);
+
+	rgvswctl = I915_READ16(MEMSWCTL);
 
 	/* Ack interrupts, disable EFC interrupt */
 	I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
@@ -2260,30 +2285,51 @@
 
 	/* Go back to the starting frequency */
 	ironlake_set_drps(dev, dev_priv->fstart);
-	msleep(1);
+	mdelay(1);
 	rgvswctl |= MEMCTL_CMD_STS;
 	I915_WRITE(MEMSWCTL, rgvswctl);
-	msleep(1);
+	mdelay(1);
 
+	spin_unlock_irq(&mchdev_lock);
+}
+
+/* There's a funny hw issue where the hw returns all 0 when reading from
+ * GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value
+ * ourselves, instead of doing a rmw cycle (which might result in us clearing
+ * all limits and the gpu stuck at whatever frequency it is at atm).
+ */
+static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 *val)
+{
+	u32 limits;
+
+	limits = 0;
+
+	if (*val >= dev_priv->rps.max_delay)
+		*val = dev_priv->rps.max_delay;
+	limits |= dev_priv->rps.max_delay << 24;
+
+	/* Only set the down limit when we've reached the lowest level to avoid
+	 * getting more interrupts, otherwise leave this clear. This prevents a
+	 * race in the hw when coming out of rc6: There's a tiny window where
+	 * the hw runs at the minimal clock before selecting the desired
+	 * frequency, if the down threshold expires in that window we will not
+	 * receive a down interrupt. */
+	if (*val <= dev_priv->rps.min_delay) {
+		*val = dev_priv->rps.min_delay;
+		limits |= dev_priv->rps.min_delay << 16;
+	}
+
+	return limits;
 }
 
 void gen6_set_rps(struct drm_device *dev, u8 val)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 limits;
+	u32 limits = gen6_rps_limits(dev_priv, &val);
 
-	limits = 0;
-	if (val >= dev_priv->max_delay)
-		val = dev_priv->max_delay;
-	else
-		limits |= dev_priv->max_delay << 24;
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
 
-	if (val <= dev_priv->min_delay)
-		val = dev_priv->min_delay;
-	else
-		limits |= dev_priv->min_delay << 16;
-
-	if (val == dev_priv->cur_delay)
+	if (val == dev_priv->rps.cur_delay)
 		return;
 
 	I915_WRITE(GEN6_RPNSWREQ,
@@ -2296,7 +2342,7 @@
 	 */
 	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
 
-	dev_priv->cur_delay = val;
+	dev_priv->rps.cur_delay = val;
 }
 
 static void gen6_disable_rps(struct drm_device *dev)
@@ -2312,40 +2358,35 @@
 	 * register (PMIMR) to mask PM interrupts. The only risk is in leaving
 	 * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
 
-	spin_lock_irq(&dev_priv->rps_lock);
-	dev_priv->pm_iir = 0;
-	spin_unlock_irq(&dev_priv->rps_lock);
+	spin_lock_irq(&dev_priv->rps.lock);
+	dev_priv->rps.pm_iir = 0;
+	spin_unlock_irq(&dev_priv->rps.lock);
 
 	I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
 }
 
 int intel_enable_rc6(const struct drm_device *dev)
 {
-	/*
-	 * Respect the kernel parameter if it is set
-	 */
+	/* Respect the kernel parameter if it is set */
 	if (i915_enable_rc6 >= 0)
 		return i915_enable_rc6;
 
-	/*
-	 * Disable RC6 on Ironlake
-	 */
-	if (INTEL_INFO(dev)->gen == 5)
-		return 0;
-
-	/* On Haswell, only RC6 is available. So let's enable it by default to
-	 * provide better testing and coverage since the beginning.
-	 */
-	if (IS_HASWELL(dev))
+	if (INTEL_INFO(dev)->gen == 5) {
+		DRM_DEBUG_DRIVER("Ironlake: only RC6 available\n");
 		return INTEL_RC6_ENABLE;
+	}
 
-	/*
-	 * Disable rc6 on Sandybridge
-	 */
+	if (IS_HASWELL(dev)) {
+		DRM_DEBUG_DRIVER("Haswell: only RC6 available\n");
+		return INTEL_RC6_ENABLE;
+	}
+
+	/* snb/ivb have more than one rc6 state. */
 	if (INTEL_INFO(dev)->gen == 6) {
 		DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n");
 		return INTEL_RC6_ENABLE;
 	}
+
 	DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n");
 	return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
 }
@@ -2383,9 +2424,9 @@
 	gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
 
 	/* In units of 100MHz */
-	dev_priv->max_delay = rp_state_cap & 0xff;
-	dev_priv->min_delay = (rp_state_cap & 0xff0000) >> 16;
-	dev_priv->cur_delay = 0;
+	dev_priv->rps.max_delay = rp_state_cap & 0xff;
+	dev_priv->rps.min_delay = (rp_state_cap & 0xff0000) >> 16;
+	dev_priv->rps.cur_delay = 0;
 
 	/* disable the counters and set deterministic thresholds */
 	I915_WRITE(GEN6_RC_CONTROL, 0);
@@ -2438,8 +2479,8 @@
 
 	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
 	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
-		   dev_priv->max_delay << 24 |
-		   dev_priv->min_delay << 16);
+		   dev_priv->rps.max_delay << 24 |
+		   dev_priv->rps.min_delay << 16);
 
 	if (IS_HASWELL(dev)) {
 		I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
@@ -2484,7 +2525,7 @@
 		     500))
 		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
 	if (pcu_mbox & (1<<31)) { /* OC supported */
-		dev_priv->max_delay = pcu_mbox & 0xff;
+		dev_priv->rps.max_delay = pcu_mbox & 0xff;
 		DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
 	}
 
@@ -2492,10 +2533,10 @@
 
 	/* requires MSI enabled */
 	I915_WRITE(GEN6_PMIER, GEN6_PM_DEFERRED_EVENTS);
-	spin_lock_irq(&dev_priv->rps_lock);
-	WARN_ON(dev_priv->pm_iir != 0);
+	spin_lock_irq(&dev_priv->rps.lock);
+	WARN_ON(dev_priv->rps.pm_iir != 0);
 	I915_WRITE(GEN6_PMIMR, 0);
-	spin_unlock_irq(&dev_priv->rps_lock);
+	spin_unlock_irq(&dev_priv->rps.lock);
 	/* enable all PM interrupts */
 	I915_WRITE(GEN6_PMINTRMSK, 0);
 
@@ -2527,9 +2568,9 @@
 	 * to use for memory access.  We do this by specifying the IA frequency
 	 * the PCU should use as a reference to determine the ring frequency.
 	 */
-	for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
+	for (gpu_freq = dev_priv->rps.max_delay; gpu_freq >= dev_priv->rps.min_delay;
 	     gpu_freq--) {
-		int diff = dev_priv->max_delay - gpu_freq;
+		int diff = dev_priv->rps.max_delay - gpu_freq;
 
 		/*
 		 * For GPU frequencies less than 750MHz, just use the lowest
@@ -2700,6 +2741,8 @@
 	unsigned long now = jiffies_to_msecs(jiffies), diff1;
 	int i;
 
+	assert_spin_locked(&mchdev_lock);
+
 	diff1 = now - dev_priv->last_time1;
 
 	/* Prevent division-by-zero if we are asking too fast.
@@ -2901,15 +2944,14 @@
 		return v_table[pxvid].vd;
 }
 
-void i915_update_gfx_val(struct drm_i915_private *dev_priv)
+static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
 {
 	struct timespec now, diff1;
 	u64 diff;
 	unsigned long diffms;
 	u32 count;
 
-	if (dev_priv->info->gen != 5)
-		return;
+	assert_spin_locked(&mchdev_lock);
 
 	getrawmonotonic(&now);
 	diff1 = timespec_sub(now, dev_priv->last_time2);
@@ -2937,12 +2979,26 @@
 	dev_priv->gfx_power = diff;
 }
 
+void i915_update_gfx_val(struct drm_i915_private *dev_priv)
+{
+	if (dev_priv->info->gen != 5)
+		return;
+
+	spin_lock_irq(&mchdev_lock);
+
+	__i915_update_gfx_val(dev_priv);
+
+	spin_unlock_irq(&mchdev_lock);
+}
+
 unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
 {
 	unsigned long t, corr, state1, corr2, state2;
 	u32 pxvid, ext_v;
 
-	pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->cur_delay * 4));
+	assert_spin_locked(&mchdev_lock);
+
+	pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->rps.cur_delay * 4));
 	pxvid = (pxvid >> 24) & 0x7f;
 	ext_v = pvid_to_extvid(dev_priv, pxvid);
 
@@ -2967,23 +3023,11 @@
 	state2 = (corr2 * state1) / 10000;
 	state2 /= 100; /* convert to mW */
 
-	i915_update_gfx_val(dev_priv);
+	__i915_update_gfx_val(dev_priv);
 
 	return dev_priv->gfx_power + state2;
 }
 
-/* Global for IPS driver to get at the current i915 device */
-static struct drm_i915_private *i915_mch_dev;
-/*
- * Lock protecting IPS related data structures
- *   - i915_mch_dev
- *   - dev_priv->max_delay
- *   - dev_priv->min_delay
- *   - dev_priv->fmax
- *   - dev_priv->gpu_busy
- */
-static DEFINE_SPINLOCK(mchdev_lock);
-
 /**
  * i915_read_mch_val - return value for IPS use
  *
@@ -2995,7 +3039,7 @@
 	struct drm_i915_private *dev_priv;
 	unsigned long chipset_val, graphics_val, ret = 0;
 
-	spin_lock(&mchdev_lock);
+	spin_lock_irq(&mchdev_lock);
 	if (!i915_mch_dev)
 		goto out_unlock;
 	dev_priv = i915_mch_dev;
@@ -3006,7 +3050,7 @@
 	ret = chipset_val + graphics_val;
 
 out_unlock:
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 
 	return ret;
 }
@@ -3022,7 +3066,7 @@
 	struct drm_i915_private *dev_priv;
 	bool ret = true;
 
-	spin_lock(&mchdev_lock);
+	spin_lock_irq(&mchdev_lock);
 	if (!i915_mch_dev) {
 		ret = false;
 		goto out_unlock;
@@ -3033,7 +3077,7 @@
 		dev_priv->max_delay--;
 
 out_unlock:
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 
 	return ret;
 }
@@ -3050,7 +3094,7 @@
 	struct drm_i915_private *dev_priv;
 	bool ret = true;
 
-	spin_lock(&mchdev_lock);
+	spin_lock_irq(&mchdev_lock);
 	if (!i915_mch_dev) {
 		ret = false;
 		goto out_unlock;
@@ -3061,7 +3105,7 @@
 		dev_priv->max_delay++;
 
 out_unlock:
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 
 	return ret;
 }
@@ -3075,17 +3119,20 @@
 bool i915_gpu_busy(void)
 {
 	struct drm_i915_private *dev_priv;
+	struct intel_ring_buffer *ring;
 	bool ret = false;
+	int i;
 
-	spin_lock(&mchdev_lock);
+	spin_lock_irq(&mchdev_lock);
 	if (!i915_mch_dev)
 		goto out_unlock;
 	dev_priv = i915_mch_dev;
 
-	ret = dev_priv->busy;
+	for_each_ring(ring, dev_priv, i)
+		ret |= !list_empty(&ring->request_list);
 
 out_unlock:
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 
 	return ret;
 }
@@ -3102,7 +3149,7 @@
 	struct drm_i915_private *dev_priv;
 	bool ret = true;
 
-	spin_lock(&mchdev_lock);
+	spin_lock_irq(&mchdev_lock);
 	if (!i915_mch_dev) {
 		ret = false;
 		goto out_unlock;
@@ -3115,7 +3162,7 @@
 		ret = false;
 
 out_unlock:
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 
 	return ret;
 }
@@ -3143,19 +3190,20 @@
 
 void intel_gpu_ips_init(struct drm_i915_private *dev_priv)
 {
-	spin_lock(&mchdev_lock);
+	/* We only register the i915 ips part with intel-ips once everything is
+	 * set up, to avoid intel-ips sneaking in and reading bogus values. */
+	spin_lock_irq(&mchdev_lock);
 	i915_mch_dev = dev_priv;
-	dev_priv->mchdev_lock = &mchdev_lock;
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 
 	ips_ping_for_i915_load();
 }
 
 void intel_gpu_ips_teardown(void)
 {
-	spin_lock(&mchdev_lock);
+	spin_lock_irq(&mchdev_lock);
 	i915_mch_dev = NULL;
-	spin_unlock(&mchdev_lock);
+	spin_unlock_irq(&mchdev_lock);
 }
 static void intel_init_emon(struct drm_device *dev)
 {
@@ -3735,42 +3783,6 @@
 		dev_priv->display.init_pch_clock_gating(dev);
 }
 
-static void gen6_sanitize_pm(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 limits, delay, old;
-
-	gen6_gt_force_wake_get(dev_priv);
-
-	old = limits = I915_READ(GEN6_RP_INTERRUPT_LIMITS);
-	/* Make sure we continue to get interrupts
-	 * until we hit the minimum or maximum frequencies.
-	 */
-	limits &= ~(0x3f << 16 | 0x3f << 24);
-	delay = dev_priv->cur_delay;
-	if (delay < dev_priv->max_delay)
-		limits |= (dev_priv->max_delay & 0x3f) << 24;
-	if (delay > dev_priv->min_delay)
-		limits |= (dev_priv->min_delay & 0x3f) << 16;
-
-	if (old != limits) {
-		/* Note that the known failure case is to read back 0. */
-		DRM_DEBUG_DRIVER("Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS "
-				 "expected %08x, was %08x\n", limits, old);
-		I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
-	}
-
-	gen6_gt_force_wake_put(dev_priv);
-}
-
-void intel_sanitize_pm(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (dev_priv->display.sanitize_pm)
-		dev_priv->display.sanitize_pm(dev);
-}
-
 /* Starting with Haswell, we have different power wells for
  * different parts of the GPU. This attempts to enable them all.
  */
@@ -3856,7 +3868,6 @@
 				dev_priv->display.update_wm = NULL;
 			}
 			dev_priv->display.init_clock_gating = gen6_init_clock_gating;
-			dev_priv->display.sanitize_pm = gen6_sanitize_pm;
 		} else if (IS_IVYBRIDGE(dev)) {
 			/* FIXME: detect B0+ stepping and use auto training */
 			if (SNB_READ_WM0_LATENCY()) {
@@ -3868,7 +3879,6 @@
 				dev_priv->display.update_wm = NULL;
 			}
 			dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
-			dev_priv->display.sanitize_pm = gen6_sanitize_pm;
 		} else if (IS_HASWELL(dev)) {
 			if (SNB_READ_WM0_LATENCY()) {
 				dev_priv->display.update_wm = sandybridge_update_wm;
@@ -3880,7 +3890,6 @@
 				dev_priv->display.update_wm = NULL;
 			}
 			dev_priv->display.init_clock_gating = haswell_init_clock_gating;
-			dev_priv->display.sanitize_pm = gen6_sanitize_pm;
 		} else
 			dev_priv->display.update_wm = NULL;
 	} else if (IS_VALLEYVIEW(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index e2a73b3..c828169 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -218,11 +218,6 @@
 	u32 scratch_addr = pc->gtt_offset + 128;
 	int ret;
 
-	/* Force SNB workarounds for PIPE_CONTROL flushes */
-	ret = intel_emit_post_sync_nonzero_flush(ring);
-	if (ret)
-		return ret;
-
 	/* Just flush everything.  Experiments have shown that reducing the
 	 * number of bits based on the write domains has little performance
 	 * impact.
@@ -262,6 +257,20 @@
 	return 0;
 }
 
+static int
+gen6_render_ring_flush__wa(struct intel_ring_buffer *ring,
+			   u32 invalidate_domains, u32 flush_domains)
+{
+	int ret;
+
+	/* Force SNB workarounds for PIPE_CONTROL flushes */
+	ret = intel_emit_post_sync_nonzero_flush(ring);
+	if (ret)
+		return ret;
+
+	return gen6_render_ring_flush(ring, invalidate_domains, flush_domains);
+}
+
 static void ring_write_tail(struct intel_ring_buffer *ring,
 			    u32 value)
 {
@@ -462,7 +471,7 @@
 	if (INTEL_INFO(dev)->gen >= 6)
 		I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
 
-	if (IS_IVYBRIDGE(dev))
+	if (HAS_L3_GPU_CACHE(dev))
 		I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
 
 	return ret;
@@ -628,26 +637,24 @@
 }
 
 static u32
-gen6_ring_get_seqno(struct intel_ring_buffer *ring)
+gen6_ring_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 {
-	struct drm_device *dev = ring->dev;
-
 	/* Workaround to force correct ordering between irq and seqno writes on
 	 * ivb (and maybe also on snb) by reading from a CS register (like
 	 * ACTHD) before reading the status page. */
-	if (IS_GEN6(dev) || IS_GEN7(dev))
+	if (!lazy_coherency)
 		intel_ring_get_active_head(ring);
 	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
 }
 
 static u32
-ring_get_seqno(struct intel_ring_buffer *ring)
+ring_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 {
 	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
 }
 
 static u32
-pc_render_get_seqno(struct intel_ring_buffer *ring)
+pc_render_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
 {
 	struct pipe_control *pc = ring->private;
 	return pc->cpu_page[0];
@@ -852,7 +859,7 @@
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
 	if (ring->irq_refcount++ == 0) {
-		if (IS_IVYBRIDGE(dev) && ring->id == RCS)
+		if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
 			I915_WRITE_IMR(ring, ~(ring->irq_enable_mask |
 						GEN6_RENDER_L3_PARITY_ERROR));
 		else
@@ -875,7 +882,7 @@
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
 	if (--ring->irq_refcount == 0) {
-		if (IS_IVYBRIDGE(dev) && ring->id == RCS)
+		if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
 			I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
 		else
 			I915_WRITE_IMR(ring, ~0);
@@ -1010,7 +1017,6 @@
 	ring->dev = dev;
 	INIT_LIST_HEAD(&ring->active_list);
 	INIT_LIST_HEAD(&ring->request_list);
-	INIT_LIST_HEAD(&ring->gpu_write_list);
 	ring->size = 32 * PAGE_SIZE;
 
 	init_waitqueue_head(&ring->irq_queue);
@@ -1380,6 +1386,8 @@
 	if (INTEL_INFO(dev)->gen >= 6) {
 		ring->add_request = gen6_add_request;
 		ring->flush = gen6_render_ring_flush;
+		if (INTEL_INFO(dev)->gen == 6)
+			ring->flush = gen6_render_ring_flush__wa;
 		ring->irq_get = gen6_ring_get_irq;
 		ring->irq_put = gen6_ring_put_irq;
 		ring->irq_enable_mask = GT_USER_INTERRUPT;
@@ -1481,7 +1489,6 @@
 	ring->dev = dev;
 	INIT_LIST_HEAD(&ring->active_list);
 	INIT_LIST_HEAD(&ring->request_list);
-	INIT_LIST_HEAD(&ring->gpu_write_list);
 
 	ring->size = size;
 	ring->effective_size = ring->size;
@@ -1574,3 +1581,41 @@
 
 	return intel_init_ring_buffer(dev, ring);
 }
+
+int
+intel_ring_flush_all_caches(struct intel_ring_buffer *ring)
+{
+	int ret;
+
+	if (!ring->gpu_caches_dirty)
+		return 0;
+
+	ret = ring->flush(ring, 0, I915_GEM_GPU_DOMAINS);
+	if (ret)
+		return ret;
+
+	trace_i915_gem_ring_flush(ring, 0, I915_GEM_GPU_DOMAINS);
+
+	ring->gpu_caches_dirty = false;
+	return 0;
+}
+
+int
+intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring)
+{
+	uint32_t flush_domains;
+	int ret;
+
+	flush_domains = 0;
+	if (ring->gpu_caches_dirty)
+		flush_domains = I915_GEM_GPU_DOMAINS;
+
+	ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, flush_domains);
+	if (ret)
+		return ret;
+
+	trace_i915_gem_ring_flush(ring, I915_GEM_GPU_DOMAINS, flush_domains);
+
+	ring->gpu_caches_dirty = false;
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 1d3c81f..2ea7a31 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -72,7 +72,14 @@
 				  u32	flush_domains);
 	int		(*add_request)(struct intel_ring_buffer *ring,
 				       u32 *seqno);
-	u32		(*get_seqno)(struct intel_ring_buffer *ring);
+	/* Some chipsets are not quite as coherent as advertised and need
+	 * an expensive kick to force a true read of the up-to-date seqno.
+	 * However, the up-to-date seqno is not always required and the last
+	 * seen value is good enough. Note that the seqno will always be
+	 * monotonic, even if not coherent.
+	 */
+	u32		(*get_seqno)(struct intel_ring_buffer *ring,
+				     bool lazy_coherency);
 	int		(*dispatch_execbuffer)(struct intel_ring_buffer *ring,
 					       u32 offset, u32 length);
 	void		(*cleanup)(struct intel_ring_buffer *ring);
@@ -101,15 +108,6 @@
 	struct list_head request_list;
 
 	/**
-	 * List of objects currently pending a GPU write flush.
-	 *
-	 * All elements on this list will belong to either the
-	 * active_list or flushing_list, last_rendering_seqno can
-	 * be used to differentiate between the two elements.
-	 */
-	struct list_head gpu_write_list;
-
-	/**
 	 * Do we have some not yet emitted requests outstanding?
 	 */
 	u32 outstanding_lazy_request;
@@ -204,6 +202,8 @@
 void intel_ring_advance(struct intel_ring_buffer *ring);
 
 u32 intel_ring_get_seqno(struct intel_ring_buffer *ring);
+int intel_ring_flush_all_caches(struct intel_ring_buffer *ring);
+int intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring);
 
 int intel_init_render_ring_buffer(struct drm_device *dev);
 int intel_init_bsd_ring_buffer(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d172e98..f3762f8 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2081,8 +2081,7 @@
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
 		intel_sdvo->is_hdmi = true;
 	}
-	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
-				       (1 << INTEL_ANALOG_CLONE_BIT));
+	intel_sdvo->base.cloneable = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (intel_sdvo->is_hdmi)
@@ -2113,7 +2112,7 @@
 
 	intel_sdvo->is_tv = true;
 	intel_sdvo->base.needs_tv_clock = true;
-	intel_sdvo->base.clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+	intel_sdvo->base.cloneable = false;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 
@@ -2156,8 +2155,7 @@
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
 	}
 
-	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
-				       (1 << INTEL_ANALOG_CLONE_BIT));
+	intel_sdvo->base.cloneable = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector,
 				  intel_sdvo);
@@ -2189,8 +2187,10 @@
 		intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
 	}
 
-	intel_sdvo->base.clone_mask = ((1 << INTEL_ANALOG_CLONE_BIT) |
-				       (1 << INTEL_SDVO_LVDS_CLONE_BIT));
+	/* SDVO LVDS is cloneable because the SDVO encoder does the upscaling,
+	 * as opposed to native LVDS, where we upscale with the panel-fitter
+	 * (and hence only the native LVDS resolution could be cloned). */
+	intel_sdvo->base.cloneable = true;
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
 	if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index befce6c..1a0bab0 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1622,7 +1622,7 @@
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	intel_encoder->type = INTEL_OUTPUT_TVOUT;
 	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
-	intel_encoder->clone_mask = (1 << INTEL_TV_CLONE_BIT);
+	intel_encoder->cloneable = false;
 	intel_encoder->base.possible_crtcs = ((1 << 0) | (1 << 1));
 	intel_encoder->base.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
 	intel_tv->type = DRM_MODE_CONNECTOR_Unknown;
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 8cc7083..d8a79bf 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -203,6 +203,9 @@
 #define DRM_I915_GEM_WAIT	0x2c
 #define DRM_I915_GEM_CONTEXT_CREATE	0x2d
 #define DRM_I915_GEM_CONTEXT_DESTROY	0x2e
+#define DRM_I915_GEM_SET_CACHEING	0x2f
+#define DRM_I915_GEM_GET_CACHEING	0x30
+#define DRM_I915_REG_READ		0x31
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -227,6 +230,8 @@
 #define DRM_IOCTL_I915_GEM_PIN		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
 #define DRM_IOCTL_I915_GEM_UNPIN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
 #define DRM_IOCTL_I915_GEM_BUSY		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
+#define DRM_IOCTL_I915_GEM_SET_CACHEING		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHEING, struct drm_i915_gem_cacheing)
+#define DRM_IOCTL_I915_GEM_GET_CACHEING		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHEING, struct drm_i915_gem_cacheing)
 #define DRM_IOCTL_I915_GEM_THROTTLE	DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
 #define DRM_IOCTL_I915_GEM_ENTERVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
 #define DRM_IOCTL_I915_GEM_LEAVEVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
@@ -249,6 +254,7 @@
 #define DRM_IOCTL_I915_GEM_WAIT		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_WAIT, struct drm_i915_gem_wait)
 #define DRM_IOCTL_I915_GEM_CONTEXT_CREATE	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create)
 #define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy)
+#define DRM_IOCTL_I915_REG_READ			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying
  * on the security mechanisms provided by hardware.
@@ -305,6 +311,7 @@
 #define I915_PARAM_HAS_LLC     	 	 17
 #define I915_PARAM_HAS_ALIASING_PPGTT	 18
 #define I915_PARAM_HAS_WAIT_TIMEOUT	 19
+#define I915_PARAM_HAS_SEMAPHORES	 20
 
 typedef struct drm_i915_getparam {
 	int param;
@@ -698,10 +705,31 @@
 	/** Handle of the buffer to check for busy */
 	__u32 handle;
 
-	/** Return busy status (1 if busy, 0 if idle) */
+	/** Return busy status (1 if busy, 0 if idle).
+	 * The high word is used to indicate on which rings the object
+	 * currently resides:
+	 *  16:31 - busy (r or r/w) rings (16 render, 17 bsd, 18 blt, etc)
+	 */
 	__u32 busy;
 };
 
+#define I915_CACHEING_NONE		0
+#define I915_CACHEING_CACHED		1
+
+struct drm_i915_gem_cacheing {
+	/**
+	 * Handle of the buffer to set/get the cacheing level of. */
+	__u32 handle;
+
+	/**
+	 * Cacheing level to apply or return value
+	 *
+	 * bits0-15 are for generic cacheing control (i.e. the above defined
+	 * values). bits16-31 are reserved for platform-specific variations
+	 * (e.g. l3$ caching on gen7). */
+	__u32 cacheing;
+};
+
 #define I915_TILING_NONE	0
 #define I915_TILING_X		1
 #define I915_TILING_Y		2
@@ -918,4 +946,8 @@
 	__u32 pad;
 };
 
+struct drm_i915_reg_read {
+	__u64 offset;
+	__u64 val; /* Return value */
+};
 #endif				/* _I915_DRM_H_ */