diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 576e9a4..24d036a 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include "clock.h"
 
 /*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 156d8fa..3ba46ed 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
 
 struct resource spipnx_0_resources[] = {
 	{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fee0d25..833c56be 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
 #include <linux/clk.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179ca..fb51f72 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f30882..87c0932 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
 #include <linux/i2c-pnx.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
 
 static int set_clock_run(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
new file mode 100644
index 0000000..8d2a5ef
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/clock.h
+ *
+ * Clock control driver for PNX4008 - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_CLOCK_H__
+#define __PNX4008_CLOCK_H__
+
+struct module;
+struct clk;
+
+#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
+#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
+#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
+#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
+#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
+#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
+#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
+#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
+#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
+#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
+#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
+#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
+#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
+#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
+#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
+#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
+#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
+#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
+#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
+#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
+#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
+#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
+#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
+
+#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
+#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
+#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
+#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
+#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
+
+#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
+
+#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
+
+#define CLK_RATE_13MHZ 13000
+#define CLK_RATE_1MHZ 1000
+#define CLK_RATE_208MHZ 208000
+#define CLK_RATE_48MHZ 48000
+#define CLK_RATE_32KHZ 32
+
+#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
new file mode 100644
index 0000000..6d1407f
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		mov	\rx, #0x00090000
+		addeq	\rx, \rx, #0x40000000
+		addne	\rx, \rx, #0xf4000000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
new file mode 100644
index 0000000..5442d04
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/dma.h
+ *
+ *  PNX4008 DMA header file
+ *
+ *  Author:	Vitaly Wool
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "platform.h"
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	8
+
+#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
+#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
+#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
+#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
+#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
+#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
+#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
+#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
+#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
+#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
+#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
+#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
+#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
+
+enum {
+	WIDTH_BYTE = 0,
+	WIDTH_HWORD,
+	WIDTH_WORD
+};
+
+enum {
+	FC_MEM2MEM_DMA,
+	FC_MEM2PER_DMA,
+	FC_PER2MEM_DMA,
+	FC_PER2PER_DMA,
+	FC_PER2PER_DPER,
+	FC_MEM2PER_PER,
+	FC_PER2MEM_PER,
+	FC_PER2PER_SPER
+};
+
+enum {
+	DMA_INT_UNKNOWN = 0,
+	DMA_ERR_INT = 1,
+	DMA_TC_INT = 2,
+};
+
+enum {
+	DMA_BUFFER_ALLOCATED = 1,
+	DMA_HAS_LL = 2,
+};
+
+enum {
+	PER_CAM_DMA_1 = 0,
+	PER_NDF_FLASH = 1,
+	PER_MBX_SLAVE_FIFO = 2,
+	PER_SPI2_REC_XMIT = 3,
+	PER_MS_SD_RX_XMIT = 4,
+	PER_HS_UART_1_XMIT = 5,
+	PER_HS_UART_1_RX = 6,
+	PER_HS_UART_2_XMIT = 7,
+	PER_HS_UART_2_RX = 8,
+	PER_HS_UART_7_XMIT = 9,
+	PER_HS_UART_7_RX = 10,
+	PER_SPI1_REC_XMIT = 11,
+	PER_MLC_NDF_SREC = 12,
+	PER_CAM_DMA_2 = 13,
+	PER_PRNG_INFIFO = 14,
+	PER_PRNG_OUTFIFO = 15,
+};
+
+struct pnx4008_dma_ch_ctrl {
+	int tc_mask;
+	int cacheable;
+	int bufferable;
+	int priv_mode;
+	int di;
+	int si;
+	int dest_ahb1;
+	int src_ahb1;
+	int dwidth;
+	int swidth;
+	int dbsize;
+	int sbsize;
+	int tr_size;
+};
+
+struct pnx4008_dma_ch_config {
+	int halt;
+	int active;
+	int lock;
+	int itc;
+	int ie;
+	int flow_cntrl;
+	int dest_per;
+	int src_per;
+};
+
+struct pnx4008_dma_ll {
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	u32 next_dma;
+	unsigned long ch_ctrl;
+	struct pnx4008_dma_ll *next;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+struct pnx4008_dma_config {
+	int is_ll;
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	unsigned long ch_ctrl;
+	unsigned long ch_cfg;
+	struct pnx4008_dma_ll *ll;
+	u32 ll_dma;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
+extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
+extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
+
+extern int pnx4008_request_channel(char *, int,
+				   void (*)(int, int, void *),
+				   void *);
+extern void pnx4008_free_channel(int);
+extern int pnx4008_config_dma(int, int, int);
+extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
+				    unsigned long *);
+extern int pnx4008_dma_parse_control(unsigned long,
+				     struct pnx4008_dma_ch_ctrl *);
+extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
+				   unsigned long *);
+extern int pnx4008_dma_parse_config(unsigned long,
+				    struct pnx4008_dma_ch_config *);
+extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
+extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
+extern int pnx4008_dma_ch_enable(int);
+extern int pnx4008_dma_ch_disable(int);
+extern int pnx4008_dma_ch_enabled(int);
+extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
+					 struct pnx4008_dma_ch_ctrl *);
+extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
+				       struct pnx4008_dma_ch_ctrl *);
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
new file mode 100644
index 0000000..8003037
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PNX4008-based platforms
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "platform.h"
+
+#define IO_BASE         0xF0000000
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#define INTRC_MASK			0x00
+#define INTRC_RAW_STAT			0x04
+#define INTRC_STAT			0x08
+#define INTRC_POLAR			0x0C
+#define INTRC_ACT_TYPE			0x10
+#define INTRC_TYPE			0x14
+
+#define SIC1_BASE_INT   32
+#define SIC2_BASE_INT   64
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* decode the MIC interrupt numbers */
+		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+		ldr	\irqstat, [\base, #INTRC_STAT]
+
+		cmp	\irqstat,#1<<16
+		movhs	\irqnr,#16
+		movlo	\irqnr,#0
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+/* was there an interrupt ? if not then drop out with EQ status */
+		teq	\irqstat,#0
+		beq	1003f
+
+/* and now check for extended IRQ reasons */
+		cmp	\irqnr,#1
+		bls	1003f
+		cmp	\irqnr,#30
+		blo	1002f
+
+/* IRQ 31,30  : High priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
+/* set the base IRQ number */
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		moveq  \irqnr,#SIC1_BASE_INT
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		movne   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		and	\irqstat,\irqstat,\tmp
+		b	1004f
+
+1003:
+/* IRQ 1,0  : Low priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
+/* read the correct SIC */
+/* set the base IRQ number  */
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		movne   \irqnr,#SIC1_BASE_INT
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		moveq   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		bic	\irqstat,\irqstat,\tmp
+
+1004:
+
+		cmp	\irqstat,#1<<16
+		addhs	\irqnr,\irqnr,#16
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+
+/* is irqstat not zero */
+
+1002:
+/* we assert that irqstat is not equal to zero and return ne status if true*/
+		teq	\irqstat,#0
+1003:
+		.endm
+
+
+		.macro	irq_prio_table
+		.endm
+
+
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
new file mode 100644
index 0000000..9591467
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN		(0)
+#define GPIO_OUT		(0x100)
+#define GPIO_BID		(0x200)
+#define GPIO_RAM		(0x300)
+#define GPIO_MUX		(0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00		(GPIO_IN | 0)
+#define GPI_01		(GPIO_IN | 1)
+#define GPI_02   	(GPIO_IN | 2)
+#define GPI_03 	 	(GPIO_IN | 3)
+#define GPI_04   	(GPIO_IN | 4)
+#define GPI_05   	(GPIO_IN | 5)
+#define GPI_06   	(GPIO_IN | 6)
+#define GPI_07   	(GPIO_IN | 7)
+#define GPI_08   	(GPIO_IN | 8)
+#define GPI_09   	(GPIO_IN | 9)
+#define U1_RX 		(GPIO_IN | 15)
+#define U2_HTCS 	(GPIO_IN | 16)
+#define U2_RX	 	(GPIO_IN | 17)
+#define U3_RX		(GPIO_IN | 18)
+#define U4_RX		(GPIO_IN | 19)
+#define U5_RX		(GPIO_IN | 20)
+#define U6_IRRX 	(GPIO_IN | 21)
+#define U7_HCTS 	(GPIO_IN | 22)
+#define U7_RX		(GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN	(GPIO_IN | 25)
+#define DISP_SYNC	(GPIO_IN | 26)
+#define SPI2_DATIN	(GPIO_IN | 27)
+#define GPI_11  	(GPIO_IN | 28)
+
+#define GPIO_IN_MASK   0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00		(GPIO_OUT | 0)
+#define GPO_01   	(GPIO_OUT | 1)
+#define GPO_02   	(GPIO_OUT | 2)
+#define GPO_03 	 	(GPIO_OUT | 3)
+#define GPO_04   	(GPIO_OUT | 4)
+#define GPO_05   	(GPIO_OUT | 5)
+#define GPO_06   	(GPIO_OUT | 6)
+#define GPO_07   	(GPIO_OUT | 7)
+#define GPO_08		(GPIO_OUT | 8)
+#define GPO_09   	(GPIO_OUT | 9)
+#define GPO_10   	(GPIO_OUT | 10)
+#define GPO_11 	 	(GPIO_OUT | 11)
+#define GPO_12   	(GPIO_OUT | 12)
+#define GPO_13   	(GPIO_OUT | 13)
+#define GPO_14   	(GPIO_OUT | 14)
+#define GPO_15   	(GPIO_OUT | 15)
+#define GPO_16  	(GPIO_OUT | 16)
+#define GPO_17 	 	(GPIO_OUT | 17)
+#define GPO_18   	(GPIO_OUT | 18)
+#define GPO_19   	(GPIO_OUT | 19)
+#define GPO_20   	(GPIO_OUT | 20)
+#define GPO_21   	(GPIO_OUT | 21)
+#define GPO_22   	(GPIO_OUT | 22)
+#define GPO_23   	(GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK   0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19		(GPIO_RAM | 0)
+#define RAM_D20  	(GPIO_RAM | 1)
+#define RAM_D21  	(GPIO_RAM | 2)
+#define RAM_D22 	(GPIO_RAM | 3)
+#define RAM_D23  	(GPIO_RAM | 4)
+#define RAM_D24  	(GPIO_RAM | 5)
+#define RAM_D25  	(GPIO_RAM | 6)
+#define RAM_D26  	(GPIO_RAM | 7)
+#define RAM_D27		(GPIO_RAM | 8)
+#define RAM_D28  	(GPIO_RAM | 9)
+#define RAM_D29  	(GPIO_RAM | 10)
+#define RAM_D30 	(GPIO_RAM | 11)
+#define RAM_D31  	(GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK   0x1fff
+
+/* I/O pins */
+#define GPIO_00  	(GPIO_BID | 25)
+#define GPIO_01 	(GPIO_BID | 26)
+#define GPIO_02  	(GPIO_BID | 27)
+#define GPIO_03  	(GPIO_BID | 28)
+#define GPIO_04 	(GPIO_BID | 29)
+#define GPIO_05  	(GPIO_BID | 30)
+
+#define GPIO_BID_MASK   0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK   0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+#define SE_USB_OTG_ATX_INT_N    19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT        17
+#define SE_KEY_IRQ              16
+#define SE_DSP_SLAVEPORT_INT    15
+#define SE_DSP_GPIO1_INT        14
+#define SE_DSP_GPIO0_INT        13
+#define SE_DSP_AHB_INT          12
+/*11-6 unused*/
+#define SE_GPIO_05_INT          5
+#define SE_GPIO_04_INT          4
+#define SE_GPIO_03_INT          3
+#define SE_GPIO_02_INT          2
+#define SE_GPIO_01_INT          1
+#define SE_GPIO_00_INT          0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
new file mode 100644
index 0000000..7b98b82
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/* Start of virtual addresses for IO devices */
+#define IO_BASE         0xF0000000
+
+/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
new file mode 100644
index 0000000..92e8d65
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/i2c.h
@@ -0,0 +1,67 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define HCLK_MHZ		13
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
new file mode 100644
index 0000000..c6206f2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -0,0 +1,21 @@
+
+/*
+ *  arch/arm/mach-pnx4008/include/mach/io.h
+ *
+ * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
new file mode 100644
index 0000000..2a690ca
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irq.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ * this one is used in entry-arnv.S as well so it cannot contain C code
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __PNX4008_IRQ_H__
+#define __PNX4008_IRQ_H__
+
+#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+
+/* Manual: Chapter 20, page 195 */
+
+#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
+
+#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
+#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
+#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
+#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
+#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
+#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern void __init pnx4008_init_irq(void);
+
+#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
new file mode 100644
index 0000000..f6b33cf
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS         96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT   64
+
+#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
+#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
+#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
+#define GPI_06_INT         92
+#define GPI_05_INT         91
+#define GPI_04_INT         90
+#define GPI_03_INT         89
+#define GPI_02_INT         88
+#define GPI_01_INT         87
+#define GPI_00_INT         86
+#define BT_CLKREQ_INT      85
+#define SPI1_DATIN_INT     84
+#define U5_RX_INT          83
+#define SDIO_INT_N         82
+#define CAM_HS_INT         81
+#define CAM_VS_INT         80
+#define GPI_07_INT         79
+#define DISP_SYNC_INT      78
+#define DSP_INT8           77
+#define U7_HCTS_INT        76
+#define GPI_10_INT         75
+#define GPI_09_INT         74
+#define GPI_08_INT         73
+#define DSP_INT7           72
+#define U2_HCTS_INT        71
+#define SPI2_DATIN_INT     70
+#define GPIO_05_INT        69
+#define GPIO_04_INT        68
+#define GPIO_03_INT        67
+#define GPIO_02_INT        66
+#define GPIO_01_INT        65
+#define GPIO_00_INT        64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT   32
+
+#define USB_I2C_INT        63
+#define USB_DEV_HP_INT     62
+#define USB_DEV_LP_INT     61
+#define USB_DEV_DMA_INT    60
+#define USB_HOST_INT       59
+#define USB_OTG_ATX_INT_N  58
+#define USB_OTG_TIMER_INT  57
+#define SW_INT             56
+#define SPI1_INT           55
+#define KEY_IRQ            54
+#define DSP_M_INT          53
+#define RTC_INT            52
+#define I2C_1_INT          51
+#define I2C_2_INT          50
+#define PLL1_LOCK_INT      49
+#define PLL2_LOCK_INT      48
+#define PLL3_LOCK_INT      47
+#define PLL4_LOCK_INT      46
+#define PLL5_LOCK_INT      45
+#define SPI2_INT           44
+#define DSP_INT1           43
+#define DSP_INT2           42
+#define DSP_TDM_INT2       41
+#define TS_AUX_INT         40
+#define TS_IRQ             39
+#define TS_P_INT           38
+#define UOUT1_TO_PAD_INT   37
+#define GPI_11_INT         36
+#define DSP_INT4           35
+#define JTAG_COMM_RX_INT   34
+#define JTAG_COMM_TX_INT   33
+#define DSP_INT3           32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT   0
+
+#define SUB2_FIQ_N         31	/*active low */
+#define SUB1_FIQ_N         30	/*active low */
+#define JPEG_INT           29
+#define DMA_INT            28
+#define MSTIMER_INT        27
+#define IIR1_INT           26
+#define IIR2_INT           25
+#define IIR7_INT           24
+#define DSP_TDM_INT0       23
+#define DSP_TDM_INT1       22
+#define DSP_P_INT          21
+#define DSP_INT0           20
+#define DUM_INT            19
+#define UOUT0_TO_PAD_INT   18
+#define MP4_ENC_INT        17
+#define MP4_DEC_INT        16
+#define SD0_INT            15
+#define MBX_INT            14
+#define SD1_INT            13
+#define MS_INT_N           12
+#define FLASH_INT          11 /*NAND*/
+#define IIR6_INT           10
+#define IIR5_INT           9
+#define IIR4_INT           8
+#define IIR3_INT           7
+#define WATCH_INT          6
+#define HSTIMER_INT        5
+#define ARCH_TIMER_IRQ     HSTIMER_INT
+#define CAM_INT            4
+#define PRNG_INT           3
+#define CRYPTO_INT         2
+#define SUB2_IRQ_N         1	/*active low */
+#define SUB1_IRQ_N         0	/*active low */
+
+#define PNX4008_IRQ_TYPES \
+{                                           /*IRQ #'s: */         \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+
+#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
new file mode 100644
index 0000000..5789a2d
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     (0x80000000)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
new file mode 100644
index 0000000..6ea02f2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
new file mode 100644
index 0000000..368c2c1
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/platform.h
+ *
+ * PNX4008 Base addresses - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+#define PNX4008_IRAM_BASE		0x08000000
+#define PNX4008_IRAM_SIZE		0x00010000
+#define PNX4008_YUV_SLAVE_BASE		0x10000000
+#define PNX4008_DUM_SLAVE_BASE		0x18000000
+#define PNX4008_NDF_FLASH_BASE		0x20020000
+#define PNX4008_SPI1_BASE		0x20088000
+#define PNX4008_SPI2_BASE		0x20090000
+#define PNX4008_SD_CONFIG_BASE		0x20098000
+#define PNX4008_FLASH_DATA		0x200B0000
+#define PNX4008_MLC_FLASH_BASE		0x200B8000
+#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
+#define PNX4008_DMA_CONFIG_BASE		0x31000000
+#define PNX4008_USB_CONFIG_BASE		0x31020000
+#define PNX4008_SDRAM_CFG_BASE		0x31080000
+#define PNX4008_AHB2FAB_BASE		0x40000000
+#define PNX4008_PWRMAN_BASE		0x40004000
+#define PNX4008_INTCTRLMIC_BASE		0x40008000
+#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
+#define PNX4008_INTCTRLSIC2_BASE	0x40010000
+#define PNX4008_HSUART1_BASE		0x40014000
+#define PNX4008_HSUART2_BASE		0x40018000
+#define PNX4008_HSUART7_BASE		0x4001C000
+#define PNX4008_RTC_BASE		0x40024000
+#define PNX4008_PIO_BASE		0x40028000
+#define PNX4008_MSTIMER_BASE		0x40034000
+#define PNX4008_HSTIMER_BASE		0x40038000
+#define PNX4008_WDOG_BASE		0x4003C000
+#define PNX4008_DEBUG_BASE		0x40040000
+#define PNX4008_TOUCH1_BASE		0x40048000
+#define PNX4008_KEYSCAN_BASE		0x40050000
+#define PNX4008_UARTCTRL_BASE		0x40054000
+#define PNX4008_PWM_BASE		0x4005C000
+#define PNX4008_UART3_BASE		0x40080000
+#define PNX4008_UART4_BASE		0x40088000
+#define PNX4008_UART5_BASE		0x40090000
+#define PNX4008_UART6_BASE		0x40098000
+#define PNX4008_I2C1_BASE		0x400A0000
+#define PNX4008_I2C2_BASE		0x400A8000
+#define PNX4008_MAGICGATE_BASE		0x400B0000
+#define PNX4008_DUMCONF_BASE		0x400B8000
+#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
+#define PNX4008_DSP_BASE		0x400C0000
+#define PNX4008_PROFCOUNTER_BASE	0x400C8000
+#define PNX4008_CRYPTO_BASE		0x400D0000
+#define PNX4008_CAMIFCONF_BASE		0x400D8000
+#define PNX4008_YUV2RGB_BASE		0x400E0000
+#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
new file mode 100644
index 0000000..2fa685b
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/pm.h
+ *
+ * PNX4008 Power Management Routiness - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_PNX4008_PM_H
+#define __ASM_ARCH_PNX4008_PM_H
+
+#ifndef __ASSEMBLER__
+#include "irq.h"
+#include "irqs.h"
+#include "clock.h"
+
+extern void pnx4008_pm_idle(void);
+extern void pnx4008_pm_suspend(void);
+extern unsigned int pnx4008_cpu_suspend_sz;
+extern void pnx4008_cpu_suspend(void);
+extern unsigned int pnx4008_cpu_standby_sz;
+extern void pnx4008_cpu_standby(void);
+
+extern int pnx4008_startup_pll(struct clk *);
+extern int pnx4008_shutdown_pll(struct clk *);
+
+#endif				/* ASSEMBLER */
+#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
new file mode 100644
index 0000000..8985a4622
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/system.h
+ *
+ * Copyright (C) 2003 Philips Semiconductors
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
new file mode 100644
index 0000000..956fbd8e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PNX4008_TIMEX_H
+#define __PNX4008_TIMEX_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define CLOCK_TICK_RATE		1000000
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
new file mode 100644
index 0000000..bb4751e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART5_BASE 0x40090000
+
+#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
+#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
+
+static __inline__ void putc(char c)
+{
+	while (UART5_FR & (1 << 5))
+		barrier();
+
+	UART5_DR = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
new file mode 100644
index 0000000..2ad3983
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 7eba292..5c4f55a 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,7 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/pgtable.h>
@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
 
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 52c51f9..f970906d 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -21,8 +21,8 @@
 
 #include <asm/io.h>
 #include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
 
 #define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
 
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index a95bd19..9be84bb 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/arch/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #define UART_3		0
 #define UART_4		1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fe6bdcd..f4eed49 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
 #define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 616cb3e..1809752 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 
 #include <asm/system.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>