Merge tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg KH:
"Here's the big char/misc driver patches for 3.14-rc1.
Lots of little things, and a new "big" driver, genwqe. Full details
are in the shortlog"
* tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
mei: limit the number of consecutive resets
mei: revamp mei reset state machine
drivers/char: don't use module_init in non-modular ttyprintk.c
VMCI: fix error handling path when registering guest driver
extcon: gpio: Add power resume support
Documentation: HOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm) in ko_KR
Documentation: HOWTO: update for 2.6.x -> 3.x versioning in ko_KR
Documentation: HOWTO: update stable address in ko_KR
Documentation: HOWTO: update LXR web link in ko_KR
char: nwbutton: open-code interruptible_sleep_on
mei: fix syntax in comments and debug output
mei: nfc: mei_nfc_free has to be called under lock
mei: use hbm idle state to prevent spurious resets
mei: do not run reset flow from the interrupt thread
misc: genwqe: fix return value check in genwqe_device_create()
GenWQE: Fix warnings for sparc
GenWQE: Fix compile problems for Alpha
Documentation/misc-devices/mei/mei-amt-version.c: remove unneeded call of mei_deinit()
GenWQE: Rework return code for flash-update ioctl
sgi-xp: open-code interruptible_sleep_on_timeout
...
diff --git a/Documentation/ABI/testing/debugfs-driver-genwqe b/Documentation/ABI/testing/debugfs-driver-genwqe
new file mode 100644
index 0000000..1c2f256
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-genwqe
@@ -0,0 +1,91 @@
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/ddcb_info
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: DDCB queue dump used for debugging queueing problems.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_regs
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Dump of the current error registers.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid0
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Internal chip state of UID0 (unit id 0).
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid1
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Internal chip state of UID1.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid2
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Internal chip state of UID2.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_regs
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Dump of the error registers before the last reset of
+ the card occured.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid0
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Internal chip state of UID0 before card was reset.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid1
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Internal chip state of UID1 before card was reset.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid2
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Internal chip state of UID2 before card was reset.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/info
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Comprehensive summary of bitstream version and software
+ version. Used bitstream and bitstream clocking information.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/err_inject
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Possibility to inject error cases to ensure that the drivers
+ error handling code works well.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/vf<0..14>_jobtimeout_msec
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Default VF timeout 250ms. Testing might require 1000ms.
+ Using 0 will use the cards default value (whatever that is).
+
+ The timeout depends on the max number of available cards
+ in the system and the maximum allowed queue size.
+
+ The driver ensures that the settings are done just before
+ the VFs get enabled. Changing the timeouts in flight is not
+ possible.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/jobtimer
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Dump job timeout register values for PF and VFs.
+ Only available for PF.
+
+What: /sys/kernel/debug/genwqe/genwqe<n>_card/queue_working_time
+Date: Dec 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Dump queue working time register values for PF and VFs.
+ Only available for PF.
diff --git a/Documentation/ABI/testing/sysfs-driver-genwqe b/Documentation/ABI/testing/sysfs-driver-genwqe
new file mode 100644
index 0000000..1870737
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-genwqe
@@ -0,0 +1,62 @@
+What: /sys/class/genwqe/genwqe<n>_card/version
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Unique bitstream identification e.g.
+ '0000000330336283.00000000475a4950'.
+
+What: /sys/class/genwqe/genwqe<n>_card/appid
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Identifies the currently active card application e.g. 'GZIP'
+ for compression/decompression.
+
+What: /sys/class/genwqe/genwqe<n>_card/type
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Type of the card e.g. 'GenWQE5-A7'.
+
+What: /sys/class/genwqe/genwqe<n>_card/curr_bitstream
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Currently active bitstream. 1 is default, 0 is backup.
+
+What: /sys/class/genwqe/genwqe<n>_card/next_bitstream
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Interface to set the next bitstream to be used.
+
+What: /sys/class/genwqe/genwqe<n>_card/tempsens
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Interface to read the cards temperature sense register.
+
+What: /sys/class/genwqe/genwqe<n>_card/freerunning_timer
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Interface to read the cards free running timer.
+ Used for performance and utilization measurements.
+
+What: /sys/class/genwqe/genwqe<n>_card/queue_working_time
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Interface to read queue working time.
+ Used for performance and utilization measurements.
+
+What: /sys/class/genwqe/genwqe<n>_card/state
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: State of the card: "unused", "used", "error".
+
+What: /sys/class/genwqe/genwqe<n>_card/base_clock
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Base clock frequency of the card.
+
+What: /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs
+Date: Oct 2013
+Contact: haver@linux.vnet.ibm.com
+Description: Enable VFs (1..15):
+ sudo sh -c 'echo 15 > \
+ /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs'
+ Disable VFs:
+ Write a 0 into the same sysfs entry.
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 27faae3..57cf5ef 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -112,7 +112,7 @@
Other excellent descriptions of how to create patches properly are:
"The Perfect Patch"
- http://kerneltrap.org/node/3737
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
@@ -579,7 +579,7 @@
For more details on what this should all look like, please see the
ChangeLog section of the document:
"The Perfect Patch"
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 1196290..78530e6 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -20,6 +20,10 @@
- interrupts: Should contain all interrupts for the TC block
Note that you can specify several interrupt cells if the TC
block has one interrupt per channel.
+- clock-names: tuple listing input clock names.
+ Required elements: "t0_clk"
+ Optional elements: "t1_clk", "t2_clk"
+- clocks: phandles to input clocks.
Examples:
@@ -28,6 +32,8 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 4>;
+ clocks = <&tcb0_clk>;
+ clock-names = "t0_clk";
};
One interrupt per TC channel in a TC block:
@@ -35,6 +41,8 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffdc000 0x100>;
interrupts = <26 4 27 4 28 4>;
+ clocks = <&tcb1_clk>;
+ clock-names = "t0_clk";
};
RSTC Reset Controller required properties:
diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
index 7dab6a8..45414bb 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -2,7 +2,11 @@
PALMAS USB COMPARATOR
Required Properties:
- - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb"
+ - compatible: should contain one of:
+ * "ti,palmas-usb-vid".
+ * "ti,twl6035-usb-vid".
+ * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid").
+ * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid").
Optional Properties:
- ti,wakeup : To enable the wakeup comparator in probe
diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index a45ae08..60960b2 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -6,6 +6,9 @@
- atmel,at91sam9g45-ssc: support dma transfer
- reg: Should contain SSC registers location and length
- interrupts: Should contain SSC interrupt
+- clock-names: tuple listing input clock names.
+ Required elements: "pclk"
+- clocks: phandles to input clocks.
Required properties for devices compatible with "atmel,at91sam9g45-ssc":
@@ -20,6 +23,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
};
- DMA transfer:
diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt
index 91dfda2..d7a6deb 100644
--- a/Documentation/devicetree/bindings/misc/bmp085.txt
+++ b/Documentation/devicetree/bindings/misc/bmp085.txt
@@ -8,6 +8,8 @@
- temp-measurement-period: temperature measurement period (milliseconds)
- default-oversampling: default oversampling value to be used at startup,
value range is 0-3 with rising sensitivity.
+- interrupt-parent: should be the phandle for the interrupt controller
+- interrupts: interrupt mapping for IRQ
Example:
@@ -17,4 +19,6 @@
chip-id = <10>;
temp-measurement-period = <100>;
default-oversampling = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
};
diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class
index 5377f63..49c81ca 100644
--- a/Documentation/extcon/porting-android-switch-class
+++ b/Documentation/extcon/porting-android-switch-class
@@ -50,7 +50,7 @@
Extcon's extended features for switch device drivers with
complex features usually required magic numbers in state
value of switch_dev. With extcon, such magic numbers that
- support multiple cables (
+ support multiple cables are no more required or supported.
1. Define cable names at edev->supported_cable.
2. (Recommended) remove print_state callback.
@@ -114,11 +114,8 @@
****** ABI Location
- If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is
-disabled, /sys/class/switch/* are created as symbolic links to
-/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates
-/sys/class/switch directory, we disable symboling linking if
-CONFIG_ANDROID_SWITCH is enabled.
+ If "CONFIG_ANDROID" is enabled, /sys/class/switch/* are created
+as symbolic links to /sys/class/extcon/*.
The two files of switch class, name and state, are provided with
extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 8148a47..0091a82 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -149,7 +149,7 @@
この他にパッチを作る方法についてのよくできた記述は-
"The Perfect Patch"
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
@@ -622,7 +622,7 @@
これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ
ントの ChangeLog セクションを見てください-
"The Perfect Patch"
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに
は数年かかるかもしれません。これは継続的な改善のプロセスであり、そのた
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
index 680e646..dc2ff8f 100644
--- a/Documentation/ko_KR/HOWTO
+++ b/Documentation/ko_KR/HOWTO
@@ -122,7 +122,7 @@
올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다.
"The Perfect Patch"
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
@@ -213,7 +213,7 @@
것은 Linux Cross-Reference project이며 그것은 자기 참조 방식이며
소스코드를 인덱스된 웹 페이지들의 형태로 보여준다. 최신의 멋진 커널
코드 저장소는 다음을 통하여 참조할 수 있다.
- http://users.sosdg.org/~qiyong/lxr/
+ http://lxr.linux.no/+trees
개발 프로세스
@@ -222,20 +222,20 @@
리눅스 커널 개발 프로세스는 현재 몇몇 다른 메인 커널 "브랜치들"과
서브시스템에 특화된 커널 브랜치들로 구성된다. 몇몇 다른 메인
브랜치들은 다음과 같다.
- - main 2.6.x 커널 트리
- - 2.6.x.y - 안정된 커널 트리
- - 2.6.x -git 커널 패치들
- - 2.6.x -mm 커널 패치들
+ - main 3.x 커널 트리
+ - 3.x.y - 안정된 커널 트리
+ - 3.x -git 커널 패치들
- 서브시스템을 위한 커널 트리들과 패치들
+ - 3.x - 통합 테스트를 위한 next 커널 트리
-2.6.x 커널 트리
+3.x 커널 트리
---------------
-2.6.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v2.6/
+3.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v3.x/
디렉토리에서 참조될 수 있다.개발 프로세스는 다음과 같다.
- 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은
메인테이너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은
- 몇 주 동안 -mm 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데
+ 몇 주 동안 -next 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데
선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/
에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내는
것도 무관하다.
@@ -262,20 +262,20 @@
버그의 상황에 따라 배포되는 것이지 미리정해 놓은 시간에 따라
배포되는 것은 아니기 때문이다."
-2.6.x.y - 안정 커널 트리
+3.x.y - 안정 커널 트리
------------------------
-4 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 2.6.x
+3 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 3.x
커널에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고 중요한 수정들을
포함한다.
이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며,
개발/실험적 버젼을 테스트하는 것을 돕고자 하는 사용자들과는 별로 관련이 없다.
-어떤 2.6.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 2.6.x
+어떤 3.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 3.x
커널이 현재의 안정 커널이다.
-2.6.x.y는 "stable" 팀<stable@kernel.org>에 의해 관리되며 거의 매번 격주로
+3.x.y는 "stable" 팀<stable@vger.kernel.org>에 의해 관리되며 거의 매번 격주로
배포된다.
커널 트리 문서들 내에 Documentation/stable_kernel_rules.txt 파일은 어떤
@@ -283,84 +283,46 @@
진행되는지를 설명한다.
-2.6.x -git 패치들
+3.x -git 패치들
------------------
git 저장소(그러므로 -git이라는 이름이 붙음)에는 날마다 관리되는 Linus의
커널 트리의 snapshot 들이 있다. 이 패치들은 일반적으로 날마다 배포되며
Linus의 트리의 현재 상태를 나타낸다. 이 패치들은 정상적인지 조금도
살펴보지 않고 자동적으로 생성된 것이므로 -rc 커널들 보다도 더 실험적이다.
-2.6.x -mm 커널 패치들
----------------------
-Andrew Morton에 의해 배포된 실험적인 커널 패치들이다. Andrew는 모든 다른
-서브시스템 커널 트리와 패치들을 가져와서 리눅스 커널 메일링 리스트로
-온 많은 패치들과 한데 묶는다. 이 트리는 새로운 기능들과 패치들을 위한
-장소를 제공하는 역할을 한다. 하나의 패치가 -mm에 한동안 있으면서 그 가치가
-증명되게 되면 Andrew나 서브시스템 메인테이너는 그것을 메인라인에 포함시키기
-위하여 Linus에게 보낸다.
-
-커널 트리에 포함하고 싶은 모든 새로운 패치들은 Linus에게 보내지기 전에
--mm 트리에서 테스트를 하는 것을 적극 추천한다.
-
-이 커널들은 안정되게 사용할 시스템에서에 실행하는 것은 적합하지 않으며
-다른 브랜치들의 어떤 것들보다 위험하다.
-
-여러분이 커널 개발 프로세스를 돕길 원한다면 이 커널 배포들을 사용하고
-테스트한 후 어떤 문제를 발견하거나 또는 모든 것이 잘 동작한다면 리눅스
-커널 메일링 리스트로 피드백을 해달라.
-
-이 커널들은 일반적으로 모든 다른 실험적인 패치들과 배포될 당시의
-사용가능한 메인라인 -git 커널들의 몇몇 변경을 포함한다.
-
--mm 커널들은 정해진 일정대로 배포되지 않는다. 하지만 대개 몇몇 -mm 커널들은
-각 -rc 커널(1부터 3이 흔함) 사이에서 배포된다.
-
서브시스템 커널 트리들과 패치들
-------------------------------
-많은 다른 커널 서브시스템 개발자들은 커널의 다른 부분들에서 무슨 일이
-일어나고 있는지를 볼수 있도록 그들의 개발 트리를 공개한다. 이 트리들은
-위에서 설명하였던 것 처럼 -mm 커널 배포들로 합쳐진다.
+다양한 커널 서브시스템의 메인테이너들 --- 그리고 많은 커널 서브시스템 개발자들
+--- 은 그들의 현재 개발 상태를 소스 저장소로 노출한다. 이를 통해 다른 사람들도
+커널의 다른 영역에 어떤 변화가 이루어지고 있는지 알 수 있다. 급속히 개발이
+진행되는 영역이 있고 그렇지 않은 영역이 있으므로, 개발자는 다른 개발자가 제출한
+수정 사항과 자신의 수정사항의 충돌이나 동일한 일을 동시에 두사람이 따로
+진행하는 사태를 방지하기 위해 급속히 개발이 진행되고 있는 영역에 작업의
+베이스를 맞춰줄 것이 요구된다.
-다음은 활용가능한 커널 트리들을 나열한다.
- git trees:
- - Kbuild development tree, Sam Ravnborg < sam@ravnborg.org>
- git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+대부분의 이러한 저장소는 git 트리지만, git이 아닌 SCM으로 관리되거나, quilt
+시리즈로 제공되는 패치들도 존재한다. 이러한 서브시스템 저장소들은 MAINTAINERS
+파일에 나열되어 있다. 대부분은 http://git.kernel.org 에서 볼 수 있다.
- - ACPI development tree, Len Brown <len.brown@intel.com >
- git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+제안된 패치는 서브시스템 트리에 커밋되기 전에 메일링 리스트를 통해
+리뷰된다(아래의 관련 섹션을 참고하기 바란다). 일부 커널 서브시스템의 경우, 이
+리뷰 프로세스는 patchwork라는 도구를 통해 추적된다. patchwork은 등록된 패치와
+패치에 대한 코멘트, 패치의 버전을 볼 수 있는 웹 인터페이스를 제공하고,
+메인테이너는 패치를 리뷰 중, 리뷰 통과, 또는 반려됨으로 표시할 수 있다.
+대부분의 이러한 patchwork 사이트는 http://patchwork.kernel.org/ 또는
+http://patchwork.ozlabs.org/ 에 나열되어 있다.
- - Block development tree, Jens Axboe <jens.axboe@oracle.com>
- git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+3.x - 통합 테스트를 위한 next 커널 트리
+-----------------------------------------
+서브시스템 트리들의 변경사항들은 mainline 3.x 트리로 들어오기 전에 통합
+테스트를 거쳐야 한다. 이런 목적으로, 모든 서브시스템 트리의 변경사항을 거의
+매일 받아가는 특수한 테스트 저장소가 존재한다:
+ http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+ http://linux.f-seidel.de/linux-next/pmwiki/
- - DRM development tree, Dave Airlie <airlied@linux.ie>
- git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
-
- - ia64 development tree, Tony Luck < tony.luck@intel.com>
- git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
- - infiniband, Roland Dreier <rolandd@cisco.com >
- git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
- - libata, Jeff Garzik <jgarzik@pobox.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
- - network drivers, Jeff Garzik <jgarzik@pobox.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
- - pcmcia, Dominik Brodowski < linux@dominikbrodowski.net>
- git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
- - SCSI, James Bottomley < James.Bottomley@SteelEye.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
- quilt trees:
- - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman < gregkh@linuxfoundation.org>
- kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
- - x86-64, partly i386, Andi Kleen < ak@suse.de>
- ftp.firstfloor.org:/pub/ak/x86_64/quilt/
-
- 다른 커널 트리들은 http://kernel.org/git와 MAINTAINERS 파일에서 참조할 수
- 있다.
+이런 식으로, -next 커널을 통해 다음 머지 기간에 메인라인 커널에 어떤 변경이
+가해질 것인지 간략히 알 수 있다. 모험심 강한 테스터라면 -next 커널에서 테스트를
+수행하는 것도 좋을 것이다.
버그 보고
---------
@@ -597,7 +559,7 @@
이것이 무엇인지 더 자세한 것을 알고 싶다면 다음 문서의 ChageLog 항을 봐라.
"The Perfect Patch"
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
diff --git a/Documentation/misc-devices/mei/mei-amt-version.c b/Documentation/misc-devices/mei/mei-amt-version.c
index 49e4f77..57d0d87 100644
--- a/Documentation/misc-devices/mei/mei-amt-version.c
+++ b/Documentation/misc-devices/mei/mei-amt-version.c
@@ -115,8 +115,6 @@
struct mei_client *cl;
struct mei_connect_client_data data;
- mei_deinit(me);
-
me->verbose = verbose;
me->fd = open("/dev/mei", O_RDWR);
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 7fba5aa..6c914aa 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -112,7 +112,7 @@
其他关于如何正确地生成补丁的优秀文档包括：
"The Perfect Patch"
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
@@ -515,7 +515,7 @@
想了解它具体应该看起来像什么，请查阅以下文档中的“ChangeLog”章节：
“The Perfect Patch”
- http://userweb.kernel.org/~akpm/stuff/tpp.txt
+ http://www.ozlabs.org/~akpm/stuff/tpp.txt
这些事情有时候做起来很难。要在任何方面都做到完美可能需要好几年时间。这是
diff --git a/MAINTAINERS b/MAINTAINERS
index ce1645e..12da488 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2619,7 +2619,7 @@
F: drivers/platform/x86/dell-laptop.c
DELL LAPTOP SMM DRIVER
-S: Orphan
+M: Guenter Roeck <linux@roeck-us.net>
F: drivers/char/i8k.c
F: include/uapi/linux/i8k.h
@@ -3335,6 +3335,7 @@
M: MyungJoo Ham <myungjoo.ham@samsung.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
L: linux-kernel@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git
S: Maintained
F: drivers/extcon/
F: Documentation/extcon/
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d79d692..896413b 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -735,7 +735,7 @@
MODULE_DEVICE_TABLE(pci, agp_amd64_pci_table);
-static DEFINE_PCI_DEVICE_TABLE(agp_amd64_pci_promisc_table) = {
+static const struct pci_device_id agp_amd64_pci_promisc_table[] = {
{ PCI_DEVICE_CLASS(0, 0) },
{ }
};
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index e6939e1..e210f85 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -1,12 +1,11 @@
/*
* i8k.c -- Linux driver for accessing the SMM BIOS on Dell laptops.
- * See http://www.debian.org/~dz/i8k/ for more information
- * and for latest version of this driver.
*
* Copyright (C) 2001 Massimo Dal Zotto <dz@debian.org>
*
* Hwmon integration:
* Copyright (C) 2011 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2013 Guenter Roeck <linux@roeck-us.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -19,6 +18,8 @@
* General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -29,13 +30,12 @@
#include <linux/mutex.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/sched.h>
#include <linux/i8k.h>
-#define I8K_VERSION "1.14 21/02/2005"
-
#define I8K_SMM_FN_STATUS 0x0025
#define I8K_SMM_POWER_STATUS 0x0069
#define I8K_SMM_SET_FAN 0x01a3
@@ -44,7 +44,6 @@
#define I8K_SMM_GET_TEMP 0x10a3
#define I8K_SMM_GET_DELL_SIG1 0xfea3
#define I8K_SMM_GET_DELL_SIG2 0xffa3
-#define I8K_SMM_BIOS_VERSION 0x00a6
#define I8K_FAN_MULT 30
#define I8K_MAX_TEMP 127
@@ -64,6 +63,15 @@
static DEFINE_MUTEX(i8k_mutex);
static char bios_version[4];
static struct device *i8k_hwmon_dev;
+static u32 i8k_hwmon_flags;
+static int i8k_fan_mult;
+
+#define I8K_HWMON_HAVE_TEMP1 (1 << 0)
+#define I8K_HWMON_HAVE_TEMP2 (1 << 1)
+#define I8K_HWMON_HAVE_TEMP3 (1 << 2)
+#define I8K_HWMON_HAVE_TEMP4 (1 << 3)
+#define I8K_HWMON_HAVE_FAN1 (1 << 4)
+#define I8K_HWMON_HAVE_FAN2 (1 << 5)
MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
@@ -103,11 +111,11 @@
struct smm_regs {
unsigned int eax;
- unsigned int ebx __attribute__ ((packed));
- unsigned int ecx __attribute__ ((packed));
- unsigned int edx __attribute__ ((packed));
- unsigned int esi __attribute__ ((packed));
- unsigned int edi __attribute__ ((packed));
+ unsigned int ebx __packed;
+ unsigned int ecx __packed;
+ unsigned int edx __packed;
+ unsigned int esi __packed;
+ unsigned int edi __packed;
};
static inline const char *i8k_get_dmi_data(int field)
@@ -124,6 +132,17 @@
{
int rc;
int eax = regs->eax;
+ cpumask_var_t old_mask;
+
+ /* SMM requires CPU 0 */
+ if (!alloc_cpumask_var(&old_mask, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_copy(old_mask, ¤t->cpus_allowed);
+ set_cpus_allowed_ptr(current, cpumask_of(0));
+ if (smp_processor_id() != 0) {
+ rc = -EBUSY;
+ goto out;
+ }
#if defined(CONFIG_X86_64)
asm volatile("pushq %%rax\n\t"
@@ -148,7 +167,7 @@
"pushfq\n\t"
"popq %%rax\n\t"
"andl $1,%%eax\n"
- :"=a"(rc)
+ : "=a"(rc)
: "a"(regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
#else
@@ -174,25 +193,17 @@
"lahf\n\t"
"shrl $8,%%eax\n\t"
"andl $1,%%eax\n"
- :"=a"(rc)
+ : "=a"(rc)
: "a"(regs)
: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
#endif
if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax)
- return -EINVAL;
+ rc = -EINVAL;
- return 0;
-}
-
-/*
- * Read the bios version. Return the version as an integer corresponding
- * to the ascii value, for example "A17" is returned as 0x00413137.
- */
-static int i8k_get_bios_version(void)
-{
- struct smm_regs regs = { .eax = I8K_SMM_BIOS_VERSION, };
-
- return i8k_smm(®s) ? : regs.eax;
+out:
+ set_cpus_allowed_ptr(current, old_mask);
+ free_cpumask_var(old_mask);
+ return rc;
}
/*
@@ -203,7 +214,8 @@
struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, };
int rc;
- if ((rc = i8k_smm(®s)) < 0)
+ rc = i8k_smm(®s);
+ if (rc < 0)
return rc;
switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) {
@@ -226,7 +238,8 @@
struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, };
int rc;
- if ((rc = i8k_smm(®s)) < 0)
+ rc = i8k_smm(®s);
+ if (rc < 0)
return rc;
return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
@@ -251,7 +264,7 @@
struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
regs.ebx = fan & 0xff;
- return i8k_smm(®s) ? : (regs.eax & 0xffff) * fan_mult;
+ return i8k_smm(®s) ? : (regs.eax & 0xffff) * i8k_fan_mult;
}
/*
@@ -277,10 +290,11 @@
int temp;
#ifdef I8K_TEMPERATURE_BUG
- static int prev;
+ static int prev[4];
#endif
regs.ebx = sensor & 0xff;
- if ((rc = i8k_smm(®s)) < 0)
+ rc = i8k_smm(®s);
+ if (rc < 0)
return rc;
temp = regs.eax & 0xff;
@@ -294,10 +308,10 @@
# 1003655139 00000054 00005c52
*/
if (temp > I8K_MAX_TEMP) {
- temp = prev;
- prev = I8K_MAX_TEMP;
+ temp = prev[sensor];
+ prev[sensor] = I8K_MAX_TEMP;
} else {
- prev = temp;
+ prev[sensor] = temp;
}
#endif
@@ -309,7 +323,8 @@
struct smm_regs regs = { .eax = req_fn, };
int rc;
- if ((rc = i8k_smm(®s)) < 0)
+ rc = i8k_smm(®s);
+ if (rc < 0)
return rc;
return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1;
@@ -328,12 +343,14 @@
switch (cmd) {
case I8K_BIOS_VERSION:
- val = i8k_get_bios_version();
+ val = (bios_version[0] << 16) |
+ (bios_version[1] << 8) | bios_version[2];
break;
case I8K_MACHINE_ID:
memset(buff, 0, 16);
- strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), sizeof(buff));
+ strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
+ sizeof(buff));
break;
case I8K_FN_STATUS:
@@ -470,12 +487,13 @@
struct device_attribute *devattr,
char *buf)
{
- int cpu_temp;
+ int index = to_sensor_dev_attr(devattr)->index;
+ int temp;
- cpu_temp = i8k_get_temp(0);
- if (cpu_temp < 0)
- return cpu_temp;
- return sprintf(buf, "%d\n", cpu_temp * 1000);
+ temp = i8k_get_temp(index);
+ if (temp < 0)
+ return temp;
+ return sprintf(buf, "%d\n", temp * 1000);
}
static ssize_t i8k_hwmon_show_fan(struct device *dev,
@@ -491,12 +509,44 @@
return sprintf(buf, "%d\n", fan_speed);
}
+static ssize_t i8k_hwmon_show_pwm(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ int status;
+
+ status = i8k_get_fan_status(index);
+ if (status < 0)
+ return -EIO;
+ return sprintf(buf, "%d\n", clamp_val(status * 128, 0, 255));
+}
+
+static ssize_t i8k_hwmon_set_pwm(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(attr)->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 128), 0, 2);
+
+ mutex_lock(&i8k_mutex);
+ err = i8k_set_fan(index, val);
+ mutex_unlock(&i8k_mutex);
+
+ return err < 0 ? -EIO : count;
+}
+
static ssize_t i8k_hwmon_show_label(struct device *dev,
struct device_attribute *devattr,
char *buf)
{
- static const char *labels[4] = {
- "i8k",
+ static const char *labels[3] = {
"CPU",
"Left Fan",
"Right Fan",
@@ -506,108 +556,108 @@
return sprintf(buf, "%s\n", labels[index]);
}
-static DEVICE_ATTR(temp1_input, S_IRUGO, i8k_hwmon_show_temp, NULL);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 3);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, i8k_hwmon_show_fan, NULL,
I8K_FAN_LEFT);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
+ i8k_hwmon_set_pwm, I8K_FAN_LEFT);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, i8k_hwmon_show_fan, NULL,
I8K_FAN_RIGHT);
-static SENSOR_DEVICE_ATTR(name, S_IRUGO, i8k_hwmon_show_label, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, i8k_hwmon_show_label, NULL, 1);
-static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, i8k_hwmon_show_label, NULL, 2);
-static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, i8k_hwmon_show_label, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
+ i8k_hwmon_set_pwm, I8K_FAN_RIGHT);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, i8k_hwmon_show_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, i8k_hwmon_show_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, i8k_hwmon_show_label, NULL, 2);
-static void i8k_hwmon_remove_files(struct device *dev)
+static struct attribute *i8k_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr, /* 0 */
+ &sensor_dev_attr_temp1_label.dev_attr.attr, /* 1 */
+ &sensor_dev_attr_temp2_input.dev_attr.attr, /* 2 */
+ &sensor_dev_attr_temp3_input.dev_attr.attr, /* 3 */
+ &sensor_dev_attr_temp4_input.dev_attr.attr, /* 4 */
+ &sensor_dev_attr_fan1_input.dev_attr.attr, /* 5 */
+ &sensor_dev_attr_pwm1.dev_attr.attr, /* 6 */
+ &sensor_dev_attr_fan1_label.dev_attr.attr, /* 7 */
+ &sensor_dev_attr_fan2_input.dev_attr.attr, /* 8 */
+ &sensor_dev_attr_pwm2.dev_attr.attr, /* 9 */
+ &sensor_dev_attr_fan2_label.dev_attr.attr, /* 10 */
+ NULL
+};
+
+static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
+ int index)
{
- device_remove_file(dev, &dev_attr_temp1_input);
- device_remove_file(dev, &sensor_dev_attr_fan1_input.dev_attr);
- device_remove_file(dev, &sensor_dev_attr_fan2_input.dev_attr);
- device_remove_file(dev, &sensor_dev_attr_temp1_label.dev_attr);
- device_remove_file(dev, &sensor_dev_attr_fan1_label.dev_attr);
- device_remove_file(dev, &sensor_dev_attr_fan2_label.dev_attr);
- device_remove_file(dev, &sensor_dev_attr_name.dev_attr);
+ if ((index == 0 || index == 1) &&
+ !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1))
+ return 0;
+ if (index == 2 && !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP2))
+ return 0;
+ if (index == 3 && !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP3))
+ return 0;
+ if (index == 4 && !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP4))
+ return 0;
+ if (index >= 5 && index <= 7 &&
+ !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN1))
+ return 0;
+ if (index >= 8 && index <= 10 &&
+ !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN2))
+ return 0;
+
+ return attr->mode;
}
+static const struct attribute_group i8k_group = {
+ .attrs = i8k_attrs,
+ .is_visible = i8k_is_visible,
+};
+__ATTRIBUTE_GROUPS(i8k);
+
static int __init i8k_init_hwmon(void)
{
int err;
- i8k_hwmon_dev = hwmon_device_register(NULL);
- if (IS_ERR(i8k_hwmon_dev)) {
- err = PTR_ERR(i8k_hwmon_dev);
- i8k_hwmon_dev = NULL;
- printk(KERN_ERR "i8k: hwmon registration failed (%d)\n", err);
- return err;
- }
-
- /* Required name attribute */
- err = device_create_file(i8k_hwmon_dev,
- &sensor_dev_attr_name.dev_attr);
- if (err)
- goto exit_unregister;
+ i8k_hwmon_flags = 0;
/* CPU temperature attributes, if temperature reading is OK */
err = i8k_get_temp(0);
- if (err < 0) {
- dev_dbg(i8k_hwmon_dev,
- "Not creating temperature attributes (%d)\n", err);
- } else {
- err = device_create_file(i8k_hwmon_dev, &dev_attr_temp1_input);
- if (err)
- goto exit_remove_files;
- err = device_create_file(i8k_hwmon_dev,
- &sensor_dev_attr_temp1_label.dev_attr);
- if (err)
- goto exit_remove_files;
- }
+ if (err >= 0)
+ i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP1;
+ /* check for additional temperature sensors */
+ err = i8k_get_temp(1);
+ if (err >= 0)
+ i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP2;
+ err = i8k_get_temp(2);
+ if (err >= 0)
+ i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP3;
+ err = i8k_get_temp(3);
+ if (err >= 0)
+ i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4;
/* Left fan attributes, if left fan is present */
err = i8k_get_fan_status(I8K_FAN_LEFT);
- if (err < 0) {
- dev_dbg(i8k_hwmon_dev,
- "Not creating %s fan attributes (%d)\n", "left", err);
- } else {
- err = device_create_file(i8k_hwmon_dev,
- &sensor_dev_attr_fan1_input.dev_attr);
- if (err)
- goto exit_remove_files;
- err = device_create_file(i8k_hwmon_dev,
- &sensor_dev_attr_fan1_label.dev_attr);
- if (err)
- goto exit_remove_files;
- }
+ if (err >= 0)
+ i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN1;
/* Right fan attributes, if right fan is present */
err = i8k_get_fan_status(I8K_FAN_RIGHT);
- if (err < 0) {
- dev_dbg(i8k_hwmon_dev,
- "Not creating %s fan attributes (%d)\n", "right", err);
- } else {
- err = device_create_file(i8k_hwmon_dev,
- &sensor_dev_attr_fan2_input.dev_attr);
- if (err)
- goto exit_remove_files;
- err = device_create_file(i8k_hwmon_dev,
- &sensor_dev_attr_fan2_label.dev_attr);
- if (err)
- goto exit_remove_files;
+ if (err >= 0)
+ i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2;
+
+ i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "i8k", NULL,
+ i8k_groups);
+ if (IS_ERR(i8k_hwmon_dev)) {
+ err = PTR_ERR(i8k_hwmon_dev);
+ i8k_hwmon_dev = NULL;
+ pr_err("hwmon registration failed (%d)\n", err);
+ return err;
}
-
return 0;
-
- exit_remove_files:
- i8k_hwmon_remove_files(i8k_hwmon_dev);
- exit_unregister:
- hwmon_device_unregister(i8k_hwmon_dev);
- return err;
}
-static void __exit i8k_exit_hwmon(void)
-{
- i8k_hwmon_remove_files(i8k_hwmon_dev);
- hwmon_device_unregister(i8k_hwmon_dev);
-}
-
-static struct dmi_system_id __initdata i8k_dmi_table[] = {
+static struct dmi_system_id i8k_dmi_table[] __initdata = {
{
.ident = "Dell Inspiron",
.matches = {
@@ -671,7 +721,23 @@
DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"),
},
},
- { }
+ {
+ .ident = "Dell Studio",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio"),
+ },
+ .driver_data = (void *)1, /* fan multiplier override */
+ },
+ {
+ .ident = "Dell XPS M140",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"),
+ },
+ .driver_data = (void *)1, /* fan multiplier override */
+ },
+ { }
};
/*
@@ -679,8 +745,7 @@
*/
static int __init i8k_probe(void)
{
- char buff[4];
- int version;
+ const struct dmi_system_id *id;
/*
* Get DMI information
@@ -689,49 +754,30 @@
if (!ignore_dmi && !force)
return -ENODEV;
- printk(KERN_INFO "i8k: not running on a supported Dell system.\n");
- printk(KERN_INFO "i8k: vendor=%s, model=%s, version=%s\n",
+ pr_info("not running on a supported Dell system.\n");
+ pr_info("vendor=%s, model=%s, version=%s\n",
i8k_get_dmi_data(DMI_SYS_VENDOR),
i8k_get_dmi_data(DMI_PRODUCT_NAME),
i8k_get_dmi_data(DMI_BIOS_VERSION));
}
- strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), sizeof(bios_version));
+ strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
+ sizeof(bios_version));
/*
* Get SMM Dell signature
*/
if (i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG1) &&
i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG2)) {
- printk(KERN_ERR "i8k: unable to get SMM Dell signature\n");
+ pr_err("unable to get SMM Dell signature\n");
if (!force)
return -ENODEV;
}
- /*
- * Get SMM BIOS version.
- */
- version = i8k_get_bios_version();
- if (version <= 0) {
- printk(KERN_WARNING "i8k: unable to get SMM BIOS version\n");
- } else {
- buff[0] = (version >> 16) & 0xff;
- buff[1] = (version >> 8) & 0xff;
- buff[2] = (version) & 0xff;
- buff[3] = '\0';
- /*
- * If DMI BIOS version is unknown use SMM BIOS version.
- */
- if (!dmi_get_system_info(DMI_BIOS_VERSION))
- strlcpy(bios_version, buff, sizeof(bios_version));
-
- /*
- * Check if the two versions match.
- */
- if (strncmp(buff, bios_version, sizeof(bios_version)) != 0)
- printk(KERN_WARNING "i8k: BIOS version mismatch: %s != %s\n",
- buff, bios_version);
- }
+ i8k_fan_mult = fan_mult;
+ id = dmi_first_match(i8k_dmi_table);
+ if (id && fan_mult == I8K_FAN_MULT && id->driver_data)
+ i8k_fan_mult = (unsigned long)id->driver_data;
return 0;
}
@@ -754,10 +800,6 @@
if (err)
goto exit_remove_proc;
- printk(KERN_INFO
- "Dell laptop SMM driver v%s Massimo Dal Zotto (dz@debian.org)\n",
- I8K_VERSION);
-
return 0;
exit_remove_proc:
@@ -767,7 +809,7 @@
static void __exit i8k_exit(void)
{
- i8k_exit_hwmon();
+ hwmon_device_unregister(i8k_hwmon_dev);
remove_proc_entry("i8k", NULL);
}
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index 0913d79..c4094c4 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -587,6 +587,8 @@
return -ENODEV;
switch ( cmd ) {
case LPTIME:
+ if (arg > UINT_MAX / HZ)
+ return -EINVAL;
LP_TIME(minor) = arg * HZ/100;
break;
case LPCHAR:
diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c
index 1fd00dc0..76c490f 100644
--- a/drivers/char/nwbutton.c
+++ b/drivers/char/nwbutton.c
@@ -168,7 +168,10 @@
static int button_read (struct file *filp, char __user *buffer,
size_t count, loff_t *ppos)
{
- interruptible_sleep_on (&button_wait_queue);
+ DEFINE_WAIT(wait);
+ prepare_to_wait(&button_wait_queue, &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&button_wait_queue, &wait);
return (copy_to_user (buffer, &button_output_buffer, bcount))
? -EFAULT : bcount;
}
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index d5d2e4a..daea84c 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -216,4 +216,4 @@
ttyprintk_driver = NULL;
return ret;
}
-module_init(ttyprintk_init);
+device_initcall(ttyprintk_init);
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index f1d54a3..bdb5a00 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -31,6 +31,16 @@
help
Say Y here to enable extcon device driver based on ADC values.
+config EXTCON_MAX14577
+ tristate "MAX14577 EXTCON Support"
+ depends on MFD_MAX14577
+ select IRQ_DOMAIN
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the MUIC device of
+ Maxim MAX14577 PMIC. The MAX14577 MUIC is a USB port accessory
+ detector and switch.
+
config EXTCON_MAX77693
tristate "MAX77693 EXTCON Support"
depends on MFD_MAX77693 && INPUT
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 759fdae..43eccc0 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_EXTCON) += extcon-class.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
+obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index a287cec..c20602f 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -44,6 +44,15 @@
#define HPDET_DEBOUNCE 500
#define DEFAULT_MICD_TIMEOUT 2000
+#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
+ ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
+ ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
+ ARIZONA_MICD_LVL_7)
+
+#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
+
+#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
+
struct arizona_extcon_info {
struct device *dev;
struct arizona *arizona;
@@ -426,26 +435,15 @@
}
val &= ARIZONA_HP_LVL_B_MASK;
+ /* Convert to ohms, the value is in 0.5 ohm increments */
+ val /= 2;
regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
&range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
- /* Skip up or down a range? */
- if (range && (val < arizona_hpdet_c_ranges[range].min)) {
- range--;
- dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
- arizona_hpdet_c_ranges[range].min,
- arizona_hpdet_c_ranges[range].max);
- regmap_update_bits(arizona->regmap,
- ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_IMPEDANCE_RANGE_MASK,
- range <<
- ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
- return -EAGAIN;
- }
-
+ /* Skip up a range, or report? */
if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
(val >= arizona_hpdet_c_ranges[range].max)) {
range++;
@@ -459,6 +457,12 @@
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
return -EAGAIN;
}
+
+ if (range && (val < arizona_hpdet_c_ranges[range].min)) {
+ dev_dbg(arizona->dev, "Reporting range boundary %d\n",
+ arizona_hpdet_c_ranges[range].min);
+ val = arizona_hpdet_c_ranges[range].min;
+ }
}
dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
@@ -594,9 +598,15 @@
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
+done:
+ /* Reset back to starting range */
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
+ 0);
+
arizona_extcon_do_magic(info, 0);
-done:
if (id_gpio)
gpio_set_value_cansleep(id_gpio, 0);
@@ -765,7 +775,20 @@
mutex_lock(&info->lock);
- for (i = 0; i < 10 && !(val & 0x7fc); i++) {
+ /* If the cable was removed while measuring ignore the result */
+ ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL);
+ if (ret < 0) {
+ dev_err(arizona->dev, "Failed to check cable state: %d\n",
+ ret);
+ mutex_unlock(&info->lock);
+ return;
+ } else if (!ret) {
+ dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
+ mutex_unlock(&info->lock);
+ return;
+ }
+
+ for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
if (ret != 0) {
dev_err(arizona->dev,
@@ -784,7 +807,7 @@
}
}
- if (i == 10 && !(val & 0x7fc)) {
+ if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
dev_err(arizona->dev, "Failed to get valid MICDET value\n");
mutex_unlock(&info->lock);
return;
@@ -798,7 +821,7 @@
}
/* If we got a high impedence we should have a headset, report it. */
- if (info->detecting && (val & 0x400)) {
+ if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
arizona_identify_headphone(info);
ret = extcon_update_state(&info->edev,
@@ -827,7 +850,7 @@
* plain headphones. If both polarities report a low
* impedence then give up and report headphones.
*/
- if (info->detecting && (val & 0x3f8)) {
+ if (info->detecting && (val & MICD_LVL_1_TO_7)) {
if (info->jack_flips >= info->micd_num_modes * 10) {
dev_dbg(arizona->dev, "Detected HP/line\n");
arizona_identify_headphone(info);
@@ -851,7 +874,7 @@
* If we're still detecting and we detect a short then we've
* got a headphone. Otherwise it's a button press.
*/
- if (val & 0x3fc) {
+ if (val & MICD_LVL_0_TO_7) {
if (info->mic) {
dev_dbg(arizona->dev, "Mic button detected\n");
@@ -1126,6 +1149,16 @@
break;
}
break;
+ case WM5110:
+ switch (arizona->rev) {
+ case 0 ... 2:
+ break;
+ default:
+ info->micd_clamp = true;
+ info->hpdet_ip = 2;
+ break;
+ }
+ break;
default:
break;
}
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 7e0dff5..a63a6b2 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -40,6 +40,7 @@
int irq;
struct delayed_work work;
unsigned long debounce_jiffies;
+ bool check_on_resume;
};
static void gpio_extcon_work(struct work_struct *work)
@@ -103,8 +104,15 @@
extcon_data->gpio_active_low = pdata->gpio_active_low;
extcon_data->state_on = pdata->state_on;
extcon_data->state_off = pdata->state_off;
+ extcon_data->check_on_resume = pdata->check_on_resume;
if (pdata->state_on && pdata->state_off)
extcon_data->edev.print_state = extcon_gpio_print_state;
+
+ ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
+ pdev->name);
+ if (ret < 0)
+ return ret;
+
if (pdata->debounce) {
ret = gpio_set_debounce(extcon_data->gpio,
pdata->debounce * 1000);
@@ -117,11 +125,6 @@
if (ret < 0)
return ret;
- ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
- pdev->name);
- if (ret < 0)
- goto err;
-
INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
extcon_data->irq = gpio_to_irq(extcon_data->gpio);
@@ -159,12 +162,31 @@
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpio_extcon_resume(struct device *dev)
+{
+ struct gpio_extcon_data *extcon_data;
+
+ extcon_data = dev_get_drvdata(dev);
+ if (extcon_data->check_on_resume)
+ queue_delayed_work(system_power_efficient_wq,
+ &extcon_data->work, extcon_data->debounce_jiffies);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops gpio_extcon_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
+};
+
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
+ .pm = &gpio_extcon_pm_ops,
},
};
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
new file mode 100644
index 0000000..3846941
--- /dev/null
+++ b/drivers/extcon/extcon-max14577.c
@@ -0,0 +1,752 @@
+/*
+ * extcon-max14577.c - MAX14577 extcon driver to support MAX14577 MUIC
+ *
+ * Copyright (C) 2013 Samsung Electrnoics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/max14577.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/extcon.h>
+
+#define DEV_NAME "max14577-muic"
+#define DELAY_MS_DEFAULT 17000 /* unit: millisecond */
+
+enum max14577_muic_adc_debounce_time {
+ ADC_DEBOUNCE_TIME_5MS = 0,
+ ADC_DEBOUNCE_TIME_10MS,
+ ADC_DEBOUNCE_TIME_25MS,
+ ADC_DEBOUNCE_TIME_38_62MS,
+};
+
+enum max14577_muic_status {
+ MAX14577_MUIC_STATUS1 = 0,
+ MAX14577_MUIC_STATUS2 = 1,
+ MAX14577_MUIC_STATUS_END,
+};
+
+struct max14577_muic_info {
+ struct device *dev;
+ struct max14577 *max14577;
+ struct extcon_dev *edev;
+ int prev_cable_type;
+ int prev_chg_type;
+ u8 status[MAX14577_MUIC_STATUS_END];
+
+ bool irq_adc;
+ bool irq_chg;
+ struct work_struct irq_work;
+ struct mutex mutex;
+
+ /*
+ * Use delayed workqueue to detect cable state and then
+ * notify cable state to notifiee/platform through uevent.
+ * After completing the booting of platform, the extcon provider
+ * driver should notify cable state to upper layer.
+ */
+ struct delayed_work wq_detcable;
+
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ int path_usb;
+ int path_uart;
+};
+
+enum max14577_muic_cable_group {
+ MAX14577_CABLE_GROUP_ADC = 0,
+ MAX14577_CABLE_GROUP_CHG,
+};
+
+/**
+ * struct max14577_muic_irq
+ * @irq: the index of irq list of MUIC device.
+ * @name: the name of irq.
+ * @virq: the virtual irq to use irq domain
+ */
+struct max14577_muic_irq {
+ unsigned int irq;
+ const char *name;
+ unsigned int virq;
+};
+
+static struct max14577_muic_irq muic_irqs[] = {
+ { MAX14577_IRQ_INT1_ADC, "muic-ADC" },
+ { MAX14577_IRQ_INT1_ADCLOW, "muic-ADCLOW" },
+ { MAX14577_IRQ_INT1_ADCERR, "muic-ADCError" },
+ { MAX14577_IRQ_INT2_CHGTYP, "muic-CHGTYP" },
+ { MAX14577_IRQ_INT2_CHGDETRUN, "muic-CHGDETRUN" },
+ { MAX14577_IRQ_INT2_DCDTMR, "muic-DCDTMR" },
+ { MAX14577_IRQ_INT2_DBCHG, "muic-DBCHG" },
+ { MAX14577_IRQ_INT2_VBVOLT, "muic-VBVOLT" },
+};
+
+/* Define supported accessory type */
+enum max14577_muic_acc_type {
+ MAX14577_MUIC_ADC_GROUND = 0x0,
+ MAX14577_MUIC_ADC_SEND_END_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S1_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S2_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S3_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S4_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S5_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S6_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S7_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S8_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S9_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S10_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S11_BUTTON,
+ MAX14577_MUIC_ADC_REMOTE_S12_BUTTON,
+ MAX14577_MUIC_ADC_RESERVED_ACC_1,
+ MAX14577_MUIC_ADC_RESERVED_ACC_2,
+ MAX14577_MUIC_ADC_RESERVED_ACC_3,
+ MAX14577_MUIC_ADC_RESERVED_ACC_4,
+ MAX14577_MUIC_ADC_RESERVED_ACC_5,
+ MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2,
+ MAX14577_MUIC_ADC_PHONE_POWERED_DEV,
+ MAX14577_MUIC_ADC_TTY_CONVERTER,
+ MAX14577_MUIC_ADC_UART_CABLE,
+ MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG,
+ MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF,
+ MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON,
+ MAX14577_MUIC_ADC_AV_CABLE_NOLOAD,
+ MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG,
+ MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF,
+ MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON,
+ MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1, /* with Remote and Simple Ctrl */
+ MAX14577_MUIC_ADC_OPEN,
+};
+
+/* max14577 MUIC device support below list of accessories(external connector) */
+enum {
+ EXTCON_CABLE_USB = 0,
+ EXTCON_CABLE_TA,
+ EXTCON_CABLE_FAST_CHARGER,
+ EXTCON_CABLE_SLOW_CHARGER,
+ EXTCON_CABLE_CHARGE_DOWNSTREAM,
+ EXTCON_CABLE_JIG_USB_ON,
+ EXTCON_CABLE_JIG_USB_OFF,
+ EXTCON_CABLE_JIG_UART_OFF,
+ EXTCON_CABLE_JIG_UART_ON,
+
+ _EXTCON_CABLE_NUM,
+};
+
+static const char *max14577_extcon_cable[] = {
+ [EXTCON_CABLE_USB] = "USB",
+ [EXTCON_CABLE_TA] = "TA",
+ [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
+ [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
+ [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
+ [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
+ [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
+ [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
+ [EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
+
+ NULL,
+};
+
+/*
+ * max14577_muic_set_debounce_time - Set the debounce time of ADC
+ * @info: the instance including private data of max14577 MUIC
+ * @time: the debounce time of ADC
+ */
+static int max14577_muic_set_debounce_time(struct max14577_muic_info *info,
+ enum max14577_muic_adc_debounce_time time)
+{
+ u8 ret;
+
+ switch (time) {
+ case ADC_DEBOUNCE_TIME_5MS:
+ case ADC_DEBOUNCE_TIME_10MS:
+ case ADC_DEBOUNCE_TIME_25MS:
+ case ADC_DEBOUNCE_TIME_38_62MS:
+ ret = max14577_update_reg(info->max14577->regmap,
+ MAX14577_MUIC_REG_CONTROL3,
+ CTRL3_ADCDBSET_MASK,
+ time << CTRL3_ADCDBSET_SHIFT);
+ if (ret) {
+ dev_err(info->dev, "failed to set ADC debounce time\n");
+ return ret;
+ }
+ break;
+ default:
+ dev_err(info->dev, "invalid ADC debounce time\n");
+ return -EINVAL;
+ }
+
+ return 0;
+};
+
+/*
+ * max14577_muic_set_path - Set hardware line according to attached cable
+ * @info: the instance including private data of max14577 MUIC
+ * @value: the path according to attached cable
+ * @attached: the state of cable (true:attached, false:detached)
+ *
+ * The max14577 MUIC device share outside H/W line among a varity of cables
+ * so, this function set internal path of H/W line according to the type of
+ * attached cable.
+ */
+static int max14577_muic_set_path(struct max14577_muic_info *info,
+ u8 val, bool attached)
+{
+ int ret = 0;
+ u8 ctrl1, ctrl2 = 0;
+
+ /* Set open state to path before changing hw path */
+ ret = max14577_update_reg(info->max14577->regmap,
+ MAX14577_MUIC_REG_CONTROL1,
+ CLEAR_IDBEN_MICEN_MASK, CTRL1_SW_OPEN);
+ if (ret < 0) {
+ dev_err(info->dev, "failed to update MUIC register\n");
+ return ret;
+ }
+
+ if (attached)
+ ctrl1 = val;
+ else
+ ctrl1 = CTRL1_SW_OPEN;
+
+ ret = max14577_update_reg(info->max14577->regmap,
+ MAX14577_MUIC_REG_CONTROL1,
+ CLEAR_IDBEN_MICEN_MASK, ctrl1);
+ if (ret < 0) {
+ dev_err(info->dev, "failed to update MUIC register\n");
+ return ret;
+ }
+
+ if (attached)
+ ctrl2 |= CTRL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
+ else
+ ctrl2 |= CTRL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
+
+ ret = max14577_update_reg(info->max14577->regmap,
+ MAX14577_REG_CONTROL2,
+ CTRL2_LOWPWR_MASK | CTRL2_CPEN_MASK, ctrl2);
+ if (ret < 0) {
+ dev_err(info->dev, "failed to update MUIC register\n");
+ return ret;
+ }
+
+ dev_dbg(info->dev,
+ "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
+ ctrl1, ctrl2, attached ? "attached" : "detached");
+
+ return 0;
+}
+
+/*
+ * max14577_muic_get_cable_type - Return cable type and check cable state
+ * @info: the instance including private data of max14577 MUIC
+ * @group: the path according to attached cable
+ * @attached: store cable state and return
+ *
+ * This function check the cable state either attached or detached,
+ * and then divide precise type of cable according to cable group.
+ * - max14577_CABLE_GROUP_ADC
+ * - max14577_CABLE_GROUP_CHG
+ */
+static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
+ enum max14577_muic_cable_group group, bool *attached)
+{
+ int cable_type = 0;
+ int adc;
+ int chg_type;
+
+ switch (group) {
+ case MAX14577_CABLE_GROUP_ADC:
+ /*
+ * Read ADC value to check cable type and decide cable state
+ * according to cable type
+ */
+ adc = info->status[MAX14577_MUIC_STATUS1] & STATUS1_ADC_MASK;
+ adc >>= STATUS1_ADC_SHIFT;
+
+ /*
+ * Check current cable state/cable type and store cable type
+ * (info->prev_cable_type) for handling cable when cable is
+ * detached.
+ */
+ if (adc == MAX14577_MUIC_ADC_OPEN) {
+ *attached = false;
+
+ cable_type = info->prev_cable_type;
+ info->prev_cable_type = MAX14577_MUIC_ADC_OPEN;
+ } else {
+ *attached = true;
+
+ cable_type = info->prev_cable_type = adc;
+ }
+ break;
+ case MAX14577_CABLE_GROUP_CHG:
+ /*
+ * Read charger type to check cable type and decide cable state
+ * according to type of charger cable.
+ */
+ chg_type = info->status[MAX14577_MUIC_STATUS2] &
+ STATUS2_CHGTYP_MASK;
+ chg_type >>= STATUS2_CHGTYP_SHIFT;
+
+ if (chg_type == MAX14577_CHARGER_TYPE_NONE) {
+ *attached = false;
+
+ cable_type = info->prev_chg_type;
+ info->prev_chg_type = MAX14577_CHARGER_TYPE_NONE;
+ } else {
+ *attached = true;
+
+ /*
+ * Check current cable state/cable type and store cable
+ * type(info->prev_chg_type) for handling cable when
+ * charger cable is detached.
+ */
+ cable_type = info->prev_chg_type = chg_type;
+ }
+
+ break;
+ default:
+ dev_err(info->dev, "Unknown cable group (%d)\n", group);
+ cable_type = -EINVAL;
+ break;
+ }
+
+ return cable_type;
+}
+
+static int max14577_muic_jig_handler(struct max14577_muic_info *info,
+ int cable_type, bool attached)
+{
+ char cable_name[32];
+ int ret = 0;
+ u8 path = CTRL1_SW_OPEN;
+
+ dev_dbg(info->dev,
+ "external connector is %s (adc:0x%02x)\n",
+ attached ? "attached" : "detached", cable_type);
+
+ switch (cable_type) {
+ case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
+ /* PATH:AP_USB */
+ strcpy(cable_name, "JIG-USB-OFF");
+ path = CTRL1_SW_USB;
+ break;
+ case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
+ /* PATH:AP_USB */
+ strcpy(cable_name, "JIG-USB-ON");
+ path = CTRL1_SW_USB;
+ break;
+ case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
+ /* PATH:AP_UART */
+ strcpy(cable_name, "JIG-UART-OFF");
+ path = CTRL1_SW_UART;
+ break;
+ default:
+ dev_err(info->dev, "failed to detect %s jig cable\n",
+ attached ? "attached" : "detached");
+ return -EINVAL;
+ }
+
+ ret = max14577_muic_set_path(info, path, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, cable_name, attached);
+
+ return 0;
+}
+
+static int max14577_muic_adc_handler(struct max14577_muic_info *info)
+{
+ int cable_type;
+ bool attached;
+ int ret = 0;
+
+ /* Check accessory state which is either detached or attached */
+ cable_type = max14577_muic_get_cable_type(info,
+ MAX14577_CABLE_GROUP_ADC, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type,
+ info->prev_cable_type);
+
+ switch (cable_type) {
+ case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF:
+ case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON:
+ case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF:
+ /* JIG */
+ ret = max14577_muic_jig_handler(info, cable_type, attached);
+ if (ret < 0)
+ return ret;
+ break;
+ case MAX14577_MUIC_ADC_GROUND:
+ case MAX14577_MUIC_ADC_SEND_END_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S1_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S2_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S3_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S4_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S5_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S6_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S7_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S8_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S9_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S10_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S11_BUTTON:
+ case MAX14577_MUIC_ADC_REMOTE_S12_BUTTON:
+ case MAX14577_MUIC_ADC_RESERVED_ACC_1:
+ case MAX14577_MUIC_ADC_RESERVED_ACC_2:
+ case MAX14577_MUIC_ADC_RESERVED_ACC_3:
+ case MAX14577_MUIC_ADC_RESERVED_ACC_4:
+ case MAX14577_MUIC_ADC_RESERVED_ACC_5:
+ case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE2:
+ case MAX14577_MUIC_ADC_PHONE_POWERED_DEV:
+ case MAX14577_MUIC_ADC_TTY_CONVERTER:
+ case MAX14577_MUIC_ADC_UART_CABLE:
+ case MAX14577_MUIC_ADC_CEA936A_TYPE1_CHG:
+ case MAX14577_MUIC_ADC_AV_CABLE_NOLOAD:
+ case MAX14577_MUIC_ADC_CEA936A_TYPE2_CHG:
+ case MAX14577_MUIC_ADC_FACTORY_MODE_UART_ON:
+ case MAX14577_MUIC_ADC_AUDIO_DEVICE_TYPE1:
+ /*
+ * This accessory isn't used in general case if it is specially
+ * needed to detect additional accessory, should implement
+ * proper operation when this accessory is attached/detached.
+ */
+ dev_info(info->dev,
+ "accessory is %s but it isn't used (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EAGAIN;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (adc:0x%x)\n",
+ attached ? "attached" : "detached", cable_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int max14577_muic_chg_handler(struct max14577_muic_info *info)
+{
+ int chg_type;
+ bool attached;
+ int ret = 0;
+
+ chg_type = max14577_muic_get_cable_type(info,
+ MAX14577_CABLE_GROUP_CHG, &attached);
+
+ dev_dbg(info->dev,
+ "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
+ attached ? "attached" : "detached",
+ chg_type, info->prev_chg_type);
+
+ switch (chg_type) {
+ case MAX14577_CHARGER_TYPE_USB:
+ /* PATH:AP_USB */
+ ret = max14577_muic_set_path(info, info->path_usb, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "USB", attached);
+ break;
+ case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+ extcon_set_cable_state(info->edev, "TA", attached);
+ break;
+ case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+ extcon_set_cable_state(info->edev,
+ "Charge-downstream", attached);
+ break;
+ case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+ extcon_set_cable_state(info->edev, "Slow-charger", attached);
+ break;
+ case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+ extcon_set_cable_state(info->edev, "Fast-charger", attached);
+ break;
+ case MAX14577_CHARGER_TYPE_NONE:
+ case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+ break;
+ default:
+ dev_err(info->dev,
+ "failed to detect %s accessory (chg_type:0x%x)\n",
+ attached ? "attached" : "detached", chg_type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void max14577_muic_irq_work(struct work_struct *work)
+{
+ struct max14577_muic_info *info = container_of(work,
+ struct max14577_muic_info, irq_work);
+ int ret = 0;
+
+ if (!info->edev)
+ return;
+
+ mutex_lock(&info->mutex);
+
+ ret = max14577_bulk_read(info->max14577->regmap,
+ MAX14577_MUIC_REG_STATUS1, info->status, 2);
+ if (ret) {
+ dev_err(info->dev, "failed to read MUIC register\n");
+ mutex_unlock(&info->mutex);
+ return;
+ }
+
+ if (info->irq_adc) {
+ ret = max14577_muic_adc_handler(info);
+ info->irq_adc = false;
+ }
+ if (info->irq_chg) {
+ ret = max14577_muic_chg_handler(info);
+ info->irq_chg = false;
+ }
+
+ if (ret < 0)
+ dev_err(info->dev, "failed to handle MUIC interrupt\n");
+
+ mutex_unlock(&info->mutex);
+
+ return;
+}
+
+static irqreturn_t max14577_muic_irq_handler(int irq, void *data)
+{
+ struct max14577_muic_info *info = data;
+ int i, irq_type = -1;
+
+ /*
+ * We may be called multiple times for different nested IRQ-s.
+ * Including changes in INT1_ADC and INT2_CGHTYP at once.
+ * However we only need to know whether it was ADC, charger
+ * or both interrupts so decode IRQ and turn on proper flags.
+ */
+ for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
+ if (irq == muic_irqs[i].virq)
+ irq_type = muic_irqs[i].irq;
+
+ switch (irq_type) {
+ case MAX14577_IRQ_INT1_ADC:
+ case MAX14577_IRQ_INT1_ADCLOW:
+ case MAX14577_IRQ_INT1_ADCERR:
+ /* Handle all of accessory except for
+ type of charger accessory */
+ info->irq_adc = true;
+ break;
+ case MAX14577_IRQ_INT2_CHGTYP:
+ case MAX14577_IRQ_INT2_CHGDETRUN:
+ case MAX14577_IRQ_INT2_DCDTMR:
+ case MAX14577_IRQ_INT2_DBCHG:
+ case MAX14577_IRQ_INT2_VBVOLT:
+ /* Handle charger accessory */
+ info->irq_chg = true;
+ break;
+ default:
+ dev_err(info->dev, "muic interrupt: irq %d occurred, skipped\n",
+ irq_type);
+ return IRQ_HANDLED;
+ }
+ schedule_work(&info->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int max14577_muic_detect_accessory(struct max14577_muic_info *info)
+{
+ int ret = 0;
+ int adc;
+ int chg_type;
+ bool attached;
+
+ mutex_lock(&info->mutex);
+
+ /* Read STATUSx register to detect accessory */
+ ret = max14577_bulk_read(info->max14577->regmap,
+ MAX14577_MUIC_REG_STATUS1, info->status, 2);
+ if (ret) {
+ dev_err(info->dev, "failed to read MUIC register\n");
+ mutex_unlock(&info->mutex);
+ return ret;
+ }
+
+ adc = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_ADC,
+ &attached);
+ if (attached && adc != MAX14577_MUIC_ADC_OPEN) {
+ ret = max14577_muic_adc_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect accessory\n");
+ mutex_unlock(&info->mutex);
+ return ret;
+ }
+ }
+
+ chg_type = max14577_muic_get_cable_type(info, MAX14577_CABLE_GROUP_CHG,
+ &attached);
+ if (attached && chg_type != MAX14577_CHARGER_TYPE_NONE) {
+ ret = max14577_muic_chg_handler(info);
+ if (ret < 0) {
+ dev_err(info->dev, "Cannot detect charger accessory\n");
+ mutex_unlock(&info->mutex);
+ return ret;
+ }
+ }
+
+ mutex_unlock(&info->mutex);
+
+ return 0;
+}
+
+static void max14577_muic_detect_cable_wq(struct work_struct *work)
+{
+ struct max14577_muic_info *info = container_of(to_delayed_work(work),
+ struct max14577_muic_info, wq_detcable);
+
+ max14577_muic_detect_accessory(info);
+}
+
+static int max14577_muic_probe(struct platform_device *pdev)
+{
+ struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+ struct max14577_muic_info *info;
+ int delay_jiffies;
+ int ret;
+ int i;
+ u8 id;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+ info->dev = &pdev->dev;
+ info->max14577 = max14577;
+
+ platform_set_drvdata(pdev, info);
+ mutex_init(&info->mutex);
+
+ INIT_WORK(&info->irq_work, max14577_muic_irq_work);
+
+ /* Support irq domain for max14577 MUIC device */
+ for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) {
+ struct max14577_muic_irq *muic_irq = &muic_irqs[i];
+ unsigned int virq = 0;
+
+ virq = regmap_irq_get_virq(max14577->irq_data, muic_irq->irq);
+ if (!virq)
+ return -EINVAL;
+ muic_irq->virq = virq;
+
+ ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
+ max14577_muic_irq_handler,
+ IRQF_NO_SUSPEND,
+ muic_irq->name, info);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed: irq request (IRQ: %d,"
+ " error :%d)\n",
+ muic_irq->irq, ret);
+ return ret;
+ }
+ }
+
+ /* Initialize extcon device */
+ info->edev = devm_kzalloc(&pdev->dev, sizeof(*info->edev), GFP_KERNEL);
+ if (!info->edev) {
+ dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
+ return -ENOMEM;
+ }
+ info->edev->name = DEV_NAME;
+ info->edev->supported_cable = max14577_extcon_cable;
+ ret = extcon_dev_register(info->edev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ /* Default h/w line path */
+ info->path_usb = CTRL1_SW_USB;
+ info->path_uart = CTRL1_SW_UART;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+
+ /* Set initial path for UART */
+ max14577_muic_set_path(info, info->path_uart, true);
+
+ /* Check revision number of MUIC device*/
+ ret = max14577_read_reg(info->max14577->regmap,
+ MAX14577_REG_DEVICEID, &id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to read revision number\n");
+ goto err_extcon;
+ }
+ dev_info(info->dev, "device ID : 0x%x\n", id);
+
+ /* Set ADC debounce time */
+ max14577_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
+
+ /*
+ * Detect accessory after completing the initialization of platform
+ *
+ * - Use delayed workqueue to detect cable state and then
+ * notify cable state to notifiee/platform through uevent.
+ * After completing the booting of platform, the extcon provider
+ * driver should notify cable state to upper layer.
+ */
+ INIT_DELAYED_WORK(&info->wq_detcable, max14577_muic_detect_cable_wq);
+ ret = queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+ delay_jiffies);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "failed to schedule delayed work for cable detect\n");
+ goto err_extcon;
+ }
+
+ return ret;
+
+err_extcon:
+ extcon_dev_unregister(info->edev);
+ return ret;
+}
+
+static int max14577_muic_remove(struct platform_device *pdev)
+{
+ struct max14577_muic_info *info = platform_get_drvdata(pdev);
+
+ cancel_work_sync(&info->irq_work);
+ extcon_dev_unregister(info->edev);
+
+ return 0;
+}
+
+static struct platform_driver max14577_muic_driver = {
+ .driver = {
+ .name = DEV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = max14577_muic_probe,
+ .remove = max14577_muic_remove,
+};
+
+module_platform_driver(max14577_muic_driver);
+
+MODULE_DESCRIPTION("MAXIM 14577 Extcon driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:extcon-max14577");
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 6c91976..2aea4bc 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -78,20 +78,24 @@
static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
{
- unsigned int set;
+ unsigned int set, id_src;
struct palmas_usb *palmas_usb = _palmas_usb;
palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_SET, &set);
+ palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
+ PALMAS_USB_ID_INT_SRC, &id_src);
- if (set & PALMAS_USB_ID_INT_SRC_ID_GND) {
+ if ((set & PALMAS_USB_ID_INT_SRC_ID_GND) &&
+ (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
- } else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) {
+ } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
+ (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
@@ -103,6 +107,11 @@
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+ } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
+ (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
+ palmas_usb->linkstat = PALMAS_USB_STATE_ID;
+ extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
+ dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
return IRQ_HANDLED;
@@ -269,7 +278,9 @@
static struct of_device_id of_palmas_match_tbl[] = {
{ .compatible = "ti,palmas-usb", },
+ { .compatible = "ti,palmas-usb-vid", },
{ .compatible = "ti,twl6035-usb", },
+ { .compatible = "ti,twl6035-usb-vid", },
{ /* end */ }
};
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index f0c5e07..bcb4950 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -301,7 +301,7 @@
return -ENOMEM;
}
-void hv_synic_free_cpu(int cpu)
+static void hv_synic_free_cpu(int cpu)
{
kfree(hv_context.event_dpc[cpu]);
if (hv_context.synic_event_page[cpu])
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a3e291d..6cb388e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -525,4 +525,5 @@
source "drivers/misc/mei/Kconfig"
source "drivers/misc/vmw_vmci/Kconfig"
source "drivers/misc/mic/Kconfig"
+source "drivers/misc/genwqe/Kconfig"
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f45473e..99b9424 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -53,3 +53,4 @@
obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o
obj-$(CONFIG_SRAM) += sram.o
obj-y += mic/
+obj-$(CONFIG_GENWQE) += genwqe/
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index 0daadcf..d3eee11 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -641,7 +641,7 @@
.attrs = ad525x_attributes_commands,
};
-int ad_dpot_add_files(struct device *dev,
+static int ad_dpot_add_files(struct device *dev,
unsigned features, unsigned rdac)
{
int err = sysfs_create_file(&dev->kobj,
@@ -666,7 +666,7 @@
return err;
}
-inline void ad_dpot_remove_files(struct device *dev,
+static inline void ad_dpot_remove_files(struct device *dev,
unsigned features, unsigned rdac)
{
sysfs_remove_file(&dev->kobj,
diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c
index 3abfcec..a7c1629 100644
--- a/drivers/misc/bmp085-i2c.c
+++ b/drivers/misc/bmp085-i2c.c
@@ -49,7 +49,7 @@
return err;
}
- return bmp085_probe(&client->dev, regmap);
+ return bmp085_probe(&client->dev, regmap, client->irq);
}
static int bmp085_i2c_remove(struct i2c_client *client)
diff --git a/drivers/misc/bmp085-spi.c b/drivers/misc/bmp085-spi.c
index d6a5265..864ecac 100644
--- a/drivers/misc/bmp085-spi.c
+++ b/drivers/misc/bmp085-spi.c
@@ -41,7 +41,7 @@
return err;
}
- return bmp085_probe(&client->dev, regmap);
+ return bmp085_probe(&client->dev, regmap, client->irq);
}
static int bmp085_spi_remove(struct spi_device *client)
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 2704d88..820e53d 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -49,9 +49,11 @@
#include <linux/device.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/of.h>
#include "bmp085.h"
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/gpio.h>
#define BMP085_CHIP_ID 0x55
#define BMP085_CALIBRATION_DATA_START 0xAA
@@ -84,8 +86,19 @@
unsigned long last_temp_measurement;
u8 chip_id;
s32 b6; /* calculated temperature correction coefficient */
+ int irq;
+ struct completion done;
};
+static irqreturn_t bmp085_eoc_isr(int irq, void *devid)
+{
+ struct bmp085_data *data = devid;
+
+ complete(&data->done);
+
+ return IRQ_HANDLED;
+}
+
static s32 bmp085_read_calibration_data(struct bmp085_data *data)
{
u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
@@ -116,6 +129,9 @@
s32 status;
mutex_lock(&data->lock);
+
+ init_completion(&data->done);
+
status = regmap_write(data->regmap, BMP085_CTRL_REG,
BMP085_TEMP_MEASUREMENT);
if (status < 0) {
@@ -123,7 +139,8 @@
"Error while requesting temperature measurement.\n");
goto exit;
}
- msleep(BMP085_TEMP_CONVERSION_TIME);
+ wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies(
+ BMP085_TEMP_CONVERSION_TIME));
status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
&tmp, sizeof(tmp));
@@ -147,6 +164,9 @@
s32 status;
mutex_lock(&data->lock);
+
+ init_completion(&data->done);
+
status = regmap_write(data->regmap, BMP085_CTRL_REG,
BMP085_PRESSURE_MEASUREMENT +
(data->oversampling_setting << 6));
@@ -157,8 +177,8 @@
}
/* wait for the end of conversion */
- msleep(2+(3 << data->oversampling_setting));
-
+ wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies(
+ 2+(3 << data->oversampling_setting)));
/* copy data into a u32 (4 bytes), but skip the first byte. */
status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
((u8 *)&tmp)+1, 3);
@@ -420,7 +440,7 @@
};
EXPORT_SYMBOL_GPL(bmp085_regmap_config);
-int bmp085_probe(struct device *dev, struct regmap *regmap)
+int bmp085_probe(struct device *dev, struct regmap *regmap, int irq)
{
struct bmp085_data *data;
int err = 0;
@@ -434,6 +454,15 @@
dev_set_drvdata(dev, data);
data->dev = dev;
data->regmap = regmap;
+ data->irq = irq;
+
+ if (data->irq > 0) {
+ err = devm_request_irq(dev, data->irq, bmp085_eoc_isr,
+ IRQF_TRIGGER_RISING, "bmp085",
+ data);
+ if (err < 0)
+ goto exit_free;
+ }
/* Initialize the BMP085 chip */
err = bmp085_init_client(data);
diff --git a/drivers/misc/bmp085.h b/drivers/misc/bmp085.h
index 2b8f615..8b8e3b1 100644
--- a/drivers/misc/bmp085.h
+++ b/drivers/misc/bmp085.h
@@ -26,7 +26,7 @@
extern struct regmap_config bmp085_regmap_config;
-int bmp085_probe(struct device *dev, struct regmap *regmap);
+int bmp085_probe(struct device *dev, struct regmap *regmap, int irq);
int bmp085_remove(struct device *dev);
int bmp085_detect(struct device *dev);
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 3a015ab..78e55b5 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -378,7 +378,6 @@
device_remove_file(&spi->dev, &dev_attr_erase);
sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
- spi_set_drvdata(spi, NULL);
kfree(edev);
return 0;
}
diff --git a/drivers/misc/genwqe/Kconfig b/drivers/misc/genwqe/Kconfig
new file mode 100644
index 0000000..6069d8c
--- /dev/null
+++ b/drivers/misc/genwqe/Kconfig
@@ -0,0 +1,13 @@
+#
+# IBM Accelerator Family 'GenWQE'
+#
+
+menuconfig GENWQE
+ tristate "GenWQE PCIe Accelerator"
+ depends on PCI && 64BIT
+ select CRC_ITU_T
+ default n
+ help
+ Enables PCIe card driver for IBM GenWQE accelerators.
+ The user-space interface is described in
+ include/linux/genwqe/genwqe_card.h.
diff --git a/drivers/misc/genwqe/Makefile b/drivers/misc/genwqe/Makefile
new file mode 100644
index 0000000..98a2b4f
--- /dev/null
+++ b/drivers/misc/genwqe/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for GenWQE driver
+#
+
+obj-$(CONFIG_GENWQE) := genwqe_card.o
+genwqe_card-objs := card_base.o card_dev.o card_ddcb.o card_sysfs.o \
+ card_debugfs.o card_utils.o
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
new file mode 100644
index 0000000..74d51c9b
--- /dev/null
+++ b/drivers/misc/genwqe/card_base.c
@@ -0,0 +1,1205 @@
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module initialization and PCIe setup. Card health monitoring and
+ * recovery functionality. Character device creation and deletion are
+ * controlled from here.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/err.h>
+#include <linux/aer.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+#include <linux/log2.h>
+#include <linux/genwqe/genwqe_card.h>
+
+#include "card_base.h"
+#include "card_ddcb.h"
+
+MODULE_AUTHOR("Frank Haverkamp <haver@linux.vnet.ibm.com>");
+MODULE_AUTHOR("Michael Ruettger <michael@ibmra.de>");
+MODULE_AUTHOR("Joerg-Stephan Vogt <jsvogt@de.ibm.com>");
+MODULE_AUTHOR("Michal Jung <mijung@de.ibm.com>");
+
+MODULE_DESCRIPTION("GenWQE Card");
+MODULE_VERSION(DRV_VERS_STRING);
+MODULE_LICENSE("GPL");
+
+static char genwqe_driver_name[] = GENWQE_DEVNAME;
+static struct class *class_genwqe;
+static struct dentry *debugfs_genwqe;
+static struct genwqe_dev *genwqe_devices[GENWQE_CARD_NO_MAX];
+
+/* PCI structure for identifying device by PCI vendor and device ID */
+static DEFINE_PCI_DEVICE_TABLE(genwqe_device_table) = {
+ { .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_GENWQE,
+ .subvendor = PCI_SUBVENDOR_ID_IBM,
+ .subdevice = PCI_SUBSYSTEM_ID_GENWQE5,
+ .class = (PCI_CLASSCODE_GENWQE5 << 8),
+ .class_mask = ~0,
+ .driver_data = 0 },
+
+ /* Initial SR-IOV bring-up image */
+ { .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_GENWQE,
+ .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV,
+ .subdevice = PCI_SUBSYSTEM_ID_GENWQE5_SRIOV,
+ .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
+ .class_mask = ~0,
+ .driver_data = 0 },
+
+ { .vendor = PCI_VENDOR_ID_IBM, /* VF Vendor ID */
+ .device = 0x0000, /* VF Device ID */
+ .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV,
+ .subdevice = PCI_SUBSYSTEM_ID_GENWQE5_SRIOV,
+ .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
+ .class_mask = ~0,
+ .driver_data = 0 },
+
+ /* Fixed up image */
+ { .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_GENWQE,
+ .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV,
+ .subdevice = PCI_SUBSYSTEM_ID_GENWQE5,
+ .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
+ .class_mask = ~0,
+ .driver_data = 0 },
+
+ { .vendor = PCI_VENDOR_ID_IBM, /* VF Vendor ID */
+ .device = 0x0000, /* VF Device ID */
+ .subvendor = PCI_SUBVENDOR_ID_IBM_SRIOV,
+ .subdevice = PCI_SUBSYSTEM_ID_GENWQE5,
+ .class = (PCI_CLASSCODE_GENWQE5_SRIOV << 8),
+ .class_mask = ~0,
+ .driver_data = 0 },
+
+ /* Even one more ... */
+ { .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_GENWQE,
+ .subvendor = PCI_SUBVENDOR_ID_IBM,
+ .subdevice = PCI_SUBSYSTEM_ID_GENWQE5_NEW,
+ .class = (PCI_CLASSCODE_GENWQE5 << 8),
+ .class_mask = ~0,
+ .driver_data = 0 },
+
+ { 0, } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, genwqe_device_table);
+
+/**
+ * genwqe_dev_alloc() - Create and prepare a new card descriptor
+ *
+ * Return: Pointer to card descriptor, or ERR_PTR(err) on error
+ */
+static struct genwqe_dev *genwqe_dev_alloc(void)
+{
+ unsigned int i = 0, j;
+ struct genwqe_dev *cd;
+
+ for (i = 0; i < GENWQE_CARD_NO_MAX; i++) {
+ if (genwqe_devices[i] == NULL)
+ break;
+ }
+ if (i >= GENWQE_CARD_NO_MAX)
+ return ERR_PTR(-ENODEV);
+
+ cd = kzalloc(sizeof(struct genwqe_dev), GFP_KERNEL);
+ if (!cd)
+ return ERR_PTR(-ENOMEM);
+
+ cd->card_idx = i;
+ cd->class_genwqe = class_genwqe;
+ cd->debugfs_genwqe = debugfs_genwqe;
+
+ init_waitqueue_head(&cd->queue_waitq);
+
+ spin_lock_init(&cd->file_lock);
+ INIT_LIST_HEAD(&cd->file_list);
+
+ cd->card_state = GENWQE_CARD_UNUSED;
+ spin_lock_init(&cd->print_lock);
+
+ cd->ddcb_software_timeout = genwqe_ddcb_software_timeout;
+ cd->kill_timeout = genwqe_kill_timeout;
+
+ for (j = 0; j < GENWQE_MAX_VFS; j++)
+ cd->vf_jobtimeout_msec[j] = genwqe_vf_jobtimeout_msec;
+
+ genwqe_devices[i] = cd;
+ return cd;
+}
+
+static void genwqe_dev_free(struct genwqe_dev *cd)
+{
+ if (!cd)
+ return;
+
+ genwqe_devices[cd->card_idx] = NULL;
+ kfree(cd);
+}
+
+/**
+ * genwqe_bus_reset() - Card recovery
+ *
+ * pci_reset_function() will recover the device and ensure that the
+ * registers are accessible again when it completes with success. If
+ * not, the card will stay dead and registers will be unaccessible
+ * still.
+ */
+static int genwqe_bus_reset(struct genwqe_dev *cd)
+{
+ int bars, rc = 0;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ void __iomem *mmio;
+
+ if (cd->err_inject & GENWQE_INJECT_BUS_RESET_FAILURE)
+ return -EIO;
+
+ mmio = cd->mmio;
+ cd->mmio = NULL;
+ pci_iounmap(pci_dev, mmio);
+
+ bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
+ pci_release_selected_regions(pci_dev, bars);
+
+ /*
+ * Firmware/BIOS might change memory mapping during bus reset.
+ * Settings like enable bus-mastering, ... are backuped and
+ * restored by the pci_reset_function().
+ */
+ dev_dbg(&pci_dev->dev, "[%s] pci_reset function ...\n", __func__);
+ rc = pci_reset_function(pci_dev);
+ if (rc) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: failed reset func (rc %d)\n", __func__, rc);
+ return rc;
+ }
+ dev_dbg(&pci_dev->dev, "[%s] done with rc=%d\n", __func__, rc);
+
+ /*
+ * Here is the right spot to clear the register read
+ * failure. pci_bus_reset() does this job in real systems.
+ */
+ cd->err_inject &= ~(GENWQE_INJECT_HARDWARE_FAILURE |
+ GENWQE_INJECT_GFIR_FATAL |
+ GENWQE_INJECT_GFIR_INFO);
+
+ rc = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
+ if (rc) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: request bars failed (%d)\n", __func__, rc);
+ return -EIO;
+ }
+
+ cd->mmio = pci_iomap(pci_dev, 0, 0);
+ if (cd->mmio == NULL) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: mapping BAR0 failed\n", __func__);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/*
+ * Hardware circumvention section. Certain bitstreams in our test-lab
+ * had different kinds of problems. Here is where we adjust those
+ * bitstreams to function will with this version of our device driver.
+ *
+ * Thise circumventions are applied to the physical function only.
+ * The magical numbers below are identifying development/manufacturing
+ * versions of the bitstream used on the card.
+ *
+ * Turn off error reporting for old/manufacturing images.
+ */
+
+bool genwqe_need_err_masking(struct genwqe_dev *cd)
+{
+ return (cd->slu_unitcfg & 0xFFFF0ull) < 0x32170ull;
+}
+
+static void genwqe_tweak_hardware(struct genwqe_dev *cd)
+{
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ /* Mask FIRs for development images */
+ if (((cd->slu_unitcfg & 0xFFFF0ull) >= 0x32000ull) &&
+ ((cd->slu_unitcfg & 0xFFFF0ull) <= 0x33250ull)) {
+ dev_warn(&pci_dev->dev,
+ "FIRs masked due to bitstream %016llx.%016llx\n",
+ cd->slu_unitcfg, cd->app_unitcfg);
+
+ __genwqe_writeq(cd, IO_APP_SEC_LEM_DEBUG_OVR,
+ 0xFFFFFFFFFFFFFFFFull);
+
+ __genwqe_writeq(cd, IO_APP_ERR_ACT_MASK,
+ 0x0000000000000000ull);
+ }
+}
+
+/**
+ * genwqe_recovery_on_fatal_gfir_required() - Version depended actions
+ *
+ * Bitstreams older than 2013-02-17 have a bug where fatal GFIRs must
+ * be ignored. This is e.g. true for the bitstream we gave to the card
+ * manufacturer, but also for some old bitstreams we released to our
+ * test-lab.
+ */
+int genwqe_recovery_on_fatal_gfir_required(struct genwqe_dev *cd)
+{
+ return (cd->slu_unitcfg & 0xFFFF0ull) >= 0x32170ull;
+}
+
+int genwqe_flash_readback_fails(struct genwqe_dev *cd)
+{
+ return (cd->slu_unitcfg & 0xFFFF0ull) < 0x32170ull;
+}
+
+/**
+ * genwqe_T_psec() - Calculate PF/VF timeout register content
+ *
+ * Note: From a design perspective it turned out to be a bad idea to
+ * use codes here to specifiy the frequency/speed values. An old
+ * driver cannot understand new codes and is therefore always a
+ * problem. Better is to measure out the value or put the
+ * speed/frequency directly into a register which is always a valid
+ * value for old as well as for new software.
+ */
+/* T = 1/f */
+static int genwqe_T_psec(struct genwqe_dev *cd)
+{
+ u16 speed; /* 1/f -> 250, 200, 166, 175 */
+ static const int T[] = { 4000, 5000, 6000, 5714 };
+
+ speed = (u16)((cd->slu_unitcfg >> 28) & 0x0full);
+ if (speed >= ARRAY_SIZE(T))
+ return -1; /* illegal value */
+
+ return T[speed];
+}
+
+/**
+ * genwqe_setup_pf_jtimer() - Setup PF hardware timeouts for DDCB execution
+ *
+ * Do this _after_ card_reset() is called. Otherwise the values will
+ * vanish. The settings need to be done when the queues are inactive.
+ *
+ * The max. timeout value is 2^(10+x) * T (6ns for 166MHz) * 15/16.
+ * The min. timeout value is 2^(10+x) * T (6ns for 166MHz) * 14/16.
+ */
+static bool genwqe_setup_pf_jtimer(struct genwqe_dev *cd)
+{
+ u32 T = genwqe_T_psec(cd);
+ u64 x;
+
+ if (genwqe_pf_jobtimeout_msec == 0)
+ return false;
+
+ /* PF: large value needed, flash update 2sec per block */
+ x = ilog2(genwqe_pf_jobtimeout_msec *
+ 16000000000uL/(T * 15)) - 10;
+
+ genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT,
+ 0xff00 | (x & 0xff), 0);
+ return true;
+}
+
+/**
+ * genwqe_setup_vf_jtimer() - Setup VF hardware timeouts for DDCB execution
+ */
+static bool genwqe_setup_vf_jtimer(struct genwqe_dev *cd)
+{
+ struct pci_dev *pci_dev = cd->pci_dev;
+ unsigned int vf;
+ u32 T = genwqe_T_psec(cd);
+ u64 x;
+
+ for (vf = 0; vf < pci_sriov_get_totalvfs(pci_dev); vf++) {
+
+ if (cd->vf_jobtimeout_msec[vf] == 0)
+ continue;
+
+ x = ilog2(cd->vf_jobtimeout_msec[vf] *
+ 16000000000uL/(T * 15)) - 10;
+
+ genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT,
+ 0xff00 | (x & 0xff), vf + 1);
+ }
+ return true;
+}
+
+static int genwqe_ffdc_buffs_alloc(struct genwqe_dev *cd)
+{
+ unsigned int type, e = 0;
+
+ for (type = 0; type < GENWQE_DBG_UNITS; type++) {
+ switch (type) {
+ case GENWQE_DBG_UNIT0:
+ e = genwqe_ffdc_buff_size(cd, 0);
+ break;
+ case GENWQE_DBG_UNIT1:
+ e = genwqe_ffdc_buff_size(cd, 1);
+ break;
+ case GENWQE_DBG_UNIT2:
+ e = genwqe_ffdc_buff_size(cd, 2);
+ break;
+ case GENWQE_DBG_REGS:
+ e = GENWQE_FFDC_REGS;
+ break;
+ }
+
+ /* currently support only the debug units mentioned here */
+ cd->ffdc[type].entries = e;
+ cd->ffdc[type].regs = kmalloc(e * sizeof(struct genwqe_reg),
+ GFP_KERNEL);
+ /*
+ * regs == NULL is ok, the using code treats this as no regs,
+ * Printing warning is ok in this case.
+ */
+ }
+ return 0;
+}
+
+static void genwqe_ffdc_buffs_free(struct genwqe_dev *cd)
+{
+ unsigned int type;
+
+ for (type = 0; type < GENWQE_DBG_UNITS; type++) {
+ kfree(cd->ffdc[type].regs);
+ cd->ffdc[type].regs = NULL;
+ }
+}
+
+static int genwqe_read_ids(struct genwqe_dev *cd)
+{
+ int err = 0;
+ int slu_id;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ cd->slu_unitcfg = __genwqe_readq(cd, IO_SLU_UNITCFG);
+ if (cd->slu_unitcfg == IO_ILLEGAL_VALUE) {
+ dev_err(&pci_dev->dev,
+ "err: SLUID=%016llx\n", cd->slu_unitcfg);
+ err = -EIO;
+ goto out_err;
+ }
+
+ slu_id = genwqe_get_slu_id(cd);
+ if (slu_id < GENWQE_SLU_ARCH_REQ || slu_id == 0xff) {
+ dev_err(&pci_dev->dev,
+ "err: incompatible SLU Architecture %u\n", slu_id);
+ err = -ENOENT;
+ goto out_err;
+ }
+
+ cd->app_unitcfg = __genwqe_readq(cd, IO_APP_UNITCFG);
+ if (cd->app_unitcfg == IO_ILLEGAL_VALUE) {
+ dev_err(&pci_dev->dev,
+ "err: APPID=%016llx\n", cd->app_unitcfg);
+ err = -EIO;
+ goto out_err;
+ }
+ genwqe_read_app_id(cd, cd->app_name, sizeof(cd->app_name));
+
+ /*
+ * Is access to all registers possible? If we are a VF the
+ * answer is obvious. If we run fully virtualized, we need to
+ * check if we can access all registers. If we do not have
+ * full access we will cause an UR and some informational FIRs
+ * in the PF, but that should not harm.
+ */
+ if (pci_dev->is_virtfn)
+ cd->is_privileged = 0;
+ else
+ cd->is_privileged = (__genwqe_readq(cd, IO_SLU_BITSTREAM)
+ != IO_ILLEGAL_VALUE);
+
+ out_err:
+ return err;
+}
+
+static int genwqe_start(struct genwqe_dev *cd)
+{
+ int err;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ err = genwqe_read_ids(cd);
+ if (err)
+ return err;
+
+ if (genwqe_is_privileged(cd)) {
+ /* do this after the tweaks. alloc fail is acceptable */
+ genwqe_ffdc_buffs_alloc(cd);
+ genwqe_stop_traps(cd);
+
+ /* Collect registers e.g. FIRs, UNITIDs, traces ... */
+ genwqe_read_ffdc_regs(cd, cd->ffdc[GENWQE_DBG_REGS].regs,
+ cd->ffdc[GENWQE_DBG_REGS].entries, 0);
+
+ genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT0,
+ cd->ffdc[GENWQE_DBG_UNIT0].regs,
+ cd->ffdc[GENWQE_DBG_UNIT0].entries);
+
+ genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT1,
+ cd->ffdc[GENWQE_DBG_UNIT1].regs,
+ cd->ffdc[GENWQE_DBG_UNIT1].entries);
+
+ genwqe_ffdc_buff_read(cd, GENWQE_DBG_UNIT2,
+ cd->ffdc[GENWQE_DBG_UNIT2].regs,
+ cd->ffdc[GENWQE_DBG_UNIT2].entries);
+
+ genwqe_start_traps(cd);
+
+ if (cd->card_state == GENWQE_CARD_FATAL_ERROR) {
+ dev_warn(&pci_dev->dev,
+ "[%s] chip reload/recovery!\n", __func__);
+
+ /*
+ * Stealth Mode: Reload chip on either hot
+ * reset or PERST.
+ */
+ cd->softreset = 0x7Cull;
+ __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET,
+ cd->softreset);
+
+ err = genwqe_bus_reset(cd);
+ if (err != 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: bus reset failed!\n",
+ __func__);
+ goto out;
+ }
+
+ /*
+ * Re-read the IDs because
+ * it could happen that the bitstream load
+ * failed!
+ */
+ err = genwqe_read_ids(cd);
+ if (err)
+ goto out;
+ }
+ }
+
+ err = genwqe_setup_service_layer(cd); /* does a reset to the card */
+ if (err != 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: could not setup servicelayer!\n", __func__);
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (genwqe_is_privileged(cd)) { /* code is running _after_ reset */
+ genwqe_tweak_hardware(cd);
+
+ genwqe_setup_pf_jtimer(cd);
+ genwqe_setup_vf_jtimer(cd);
+ }
+
+ err = genwqe_device_create(cd);
+ if (err < 0) {
+ dev_err(&pci_dev->dev,
+ "err: chdev init failed! (err=%d)\n", err);
+ goto out_release_service_layer;
+ }
+ return 0;
+
+ out_release_service_layer:
+ genwqe_release_service_layer(cd);
+ out:
+ if (genwqe_is_privileged(cd))
+ genwqe_ffdc_buffs_free(cd);
+ return -EIO;
+}
+
+/**
+ * genwqe_stop() - Stop card operation
+ *
+ * Recovery notes:
+ * As long as genwqe_thread runs we might access registers during
+ * error data capture. Same is with the genwqe_health_thread.
+ * When genwqe_bus_reset() fails this function might called two times:
+ * first by the genwqe_health_thread() and later by genwqe_remove() to
+ * unbind the device. We must be able to survive that.
+ *
+ * This function must be robust enough to be called twice.
+ */
+static int genwqe_stop(struct genwqe_dev *cd)
+{
+ genwqe_finish_queue(cd); /* no register access */
+ genwqe_device_remove(cd); /* device removed, procs killed */
+ genwqe_release_service_layer(cd); /* here genwqe_thread is stopped */
+
+ if (genwqe_is_privileged(cd)) {
+ pci_disable_sriov(cd->pci_dev); /* access pci config space */
+ genwqe_ffdc_buffs_free(cd);
+ }
+
+ return 0;
+}
+
+/**
+ * genwqe_recover_card() - Try to recover the card if it is possible
+ *
+ * If fatal_err is set no register access is possible anymore. It is
+ * likely that genwqe_start fails in that situation. Proper error
+ * handling is required in this case.
+ *
+ * genwqe_bus_reset() will cause the pci code to call genwqe_remove()
+ * and later genwqe_probe() for all virtual functions.
+ */
+static int genwqe_recover_card(struct genwqe_dev *cd, int fatal_err)
+{
+ int rc;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ genwqe_stop(cd);
+
+ /*
+ * Make sure chip is not reloaded to maintain FFDC. Write SLU
+ * Reset Register, CPLDReset field to 0.
+ */
+ if (!fatal_err) {
+ cd->softreset = 0x70ull;
+ __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, cd->softreset);
+ }
+
+ rc = genwqe_bus_reset(cd);
+ if (rc != 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: card recovery impossible!\n", __func__);
+ return rc;
+ }
+
+ rc = genwqe_start(cd);
+ if (rc < 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: failed to launch device!\n", __func__);
+ return rc;
+ }
+ return 0;
+}
+
+static int genwqe_health_check_cond(struct genwqe_dev *cd, u64 *gfir)
+{
+ *gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ return (*gfir & GFIR_ERR_TRIGGER) &&
+ genwqe_recovery_on_fatal_gfir_required(cd);
+}
+
+/**
+ * genwqe_fir_checking() - Check the fault isolation registers of the card
+ *
+ * If this code works ok, can be tried out with help of the genwqe_poke tool:
+ * sudo ./tools/genwqe_poke 0x8 0xfefefefefef
+ *
+ * Now the relevant FIRs/sFIRs should be printed out and the driver should
+ * invoke recovery (devices are removed and readded).
+ */
+static u64 genwqe_fir_checking(struct genwqe_dev *cd)
+{
+ int j, iterations = 0;
+ u64 mask, fir, fec, uid, gfir, gfir_masked, sfir, sfec;
+ u32 fir_addr, fir_clr_addr, fec_addr, sfir_addr, sfec_addr;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ healthMonitor:
+ iterations++;
+ if (iterations > 16) {
+ dev_err(&pci_dev->dev, "* exit looping after %d times\n",
+ iterations);
+ goto fatal_error;
+ }
+
+ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ if (gfir != 0x0)
+ dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n",
+ IO_SLC_CFGREG_GFIR, gfir);
+ if (gfir == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+
+ /*
+ * Avoid printing when to GFIR bit is on prevents contignous
+ * printout e.g. for the following bug:
+ * FIR set without a 2ndary FIR/FIR cannot be cleared
+ * Comment out the following if to get the prints:
+ */
+ if (gfir == 0)
+ return 0;
+
+ gfir_masked = gfir & GFIR_ERR_TRIGGER; /* fatal errors */
+
+ for (uid = 0; uid < GENWQE_MAX_UNITS; uid++) { /* 0..2 in zEDC */
+
+ /* read the primary FIR (pfir) */
+ fir_addr = (uid << 24) + 0x08;
+ fir = __genwqe_readq(cd, fir_addr);
+ if (fir == 0x0)
+ continue; /* no error in this unit */
+
+ dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", fir_addr, fir);
+ if (fir == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+
+ /* read primary FEC */
+ fec_addr = (uid << 24) + 0x18;
+ fec = __genwqe_readq(cd, fec_addr);
+
+ dev_err(&pci_dev->dev, "* 0x%08x 0x%016llx\n", fec_addr, fec);
+ if (fec == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+
+ for (j = 0, mask = 1ULL; j < 64; j++, mask <<= 1) {
+
+ /* secondary fir empty, skip it */
+ if ((fir & mask) == 0x0)
+ continue;
+
+ sfir_addr = (uid << 24) + 0x100 + 0x08 * j;
+ sfir = __genwqe_readq(cd, sfir_addr);
+
+ if (sfir == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+ dev_err(&pci_dev->dev,
+ "* 0x%08x 0x%016llx\n", sfir_addr, sfir);
+
+ sfec_addr = (uid << 24) + 0x300 + 0x08 * j;
+ sfec = __genwqe_readq(cd, sfec_addr);
+
+ if (sfec == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+ dev_err(&pci_dev->dev,
+ "* 0x%08x 0x%016llx\n", sfec_addr, sfec);
+
+ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ if (gfir == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+
+ /* gfir turned on during routine! get out and
+ start over. */
+ if ((gfir_masked == 0x0) &&
+ (gfir & GFIR_ERR_TRIGGER)) {
+ goto healthMonitor;
+ }
+
+ /* do not clear if we entered with a fatal gfir */
+ if (gfir_masked == 0x0) {
+
+ /* NEW clear by mask the logged bits */
+ sfir_addr = (uid << 24) + 0x100 + 0x08 * j;
+ __genwqe_writeq(cd, sfir_addr, sfir);
+
+ dev_dbg(&pci_dev->dev,
+ "[HM] Clearing 2ndary FIR 0x%08x "
+ "with 0x%016llx\n", sfir_addr, sfir);
+
+ /*
+ * note, these cannot be error-Firs
+ * since gfir_masked is 0 after sfir
+ * was read. Also, it is safe to do
+ * this write if sfir=0. Still need to
+ * clear the primary. This just means
+ * there is no secondary FIR.
+ */
+
+ /* clear by mask the logged bit. */
+ fir_clr_addr = (uid << 24) + 0x10;
+ __genwqe_writeq(cd, fir_clr_addr, mask);
+
+ dev_dbg(&pci_dev->dev,
+ "[HM] Clearing primary FIR 0x%08x "
+ "with 0x%016llx\n", fir_clr_addr,
+ mask);
+ }
+ }
+ }
+ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ if (gfir == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+
+ if ((gfir_masked == 0x0) && (gfir & GFIR_ERR_TRIGGER)) {
+ /*
+ * Check once more that it didn't go on after all the
+ * FIRS were cleared.
+ */
+ dev_dbg(&pci_dev->dev, "ACK! Another FIR! Recursing %d!\n",
+ iterations);
+ goto healthMonitor;
+ }
+ return gfir_masked;
+
+ fatal_error:
+ return IO_ILLEGAL_VALUE;
+}
+
+/**
+ * genwqe_health_thread() - Health checking thread
+ *
+ * This thread is only started for the PF of the card.
+ *
+ * This thread monitors the health of the card. A critical situation
+ * is when we read registers which contain -1 (IO_ILLEGAL_VALUE). In
+ * this case we need to be recovered from outside. Writing to
+ * registers will very likely not work either.
+ *
+ * This thread must only exit if kthread_should_stop() becomes true.
+ *
+ * Condition for the health-thread to trigger:
+ * a) when a kthread_stop() request comes in or
+ * b) a critical GFIR occured
+ *
+ * Informational GFIRs are checked and potentially printed in
+ * health_check_interval seconds.
+ */
+static int genwqe_health_thread(void *data)
+{
+ int rc, should_stop = 0;
+ struct genwqe_dev *cd = data;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ u64 gfir, gfir_masked, slu_unitcfg, app_unitcfg;
+
+ while (!kthread_should_stop()) {
+ rc = wait_event_interruptible_timeout(cd->health_waitq,
+ (genwqe_health_check_cond(cd, &gfir) ||
+ (should_stop = kthread_should_stop())),
+ genwqe_health_check_interval * HZ);
+
+ if (should_stop)
+ break;
+
+ if (gfir == IO_ILLEGAL_VALUE) {
+ dev_err(&pci_dev->dev,
+ "[%s] GFIR=%016llx\n", __func__, gfir);
+ goto fatal_error;
+ }
+
+ slu_unitcfg = __genwqe_readq(cd, IO_SLU_UNITCFG);
+ if (slu_unitcfg == IO_ILLEGAL_VALUE) {
+ dev_err(&pci_dev->dev,
+ "[%s] SLU_UNITCFG=%016llx\n",
+ __func__, slu_unitcfg);
+ goto fatal_error;
+ }
+
+ app_unitcfg = __genwqe_readq(cd, IO_APP_UNITCFG);
+ if (app_unitcfg == IO_ILLEGAL_VALUE) {
+ dev_err(&pci_dev->dev,
+ "[%s] APP_UNITCFG=%016llx\n",
+ __func__, app_unitcfg);
+ goto fatal_error;
+ }
+
+ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ if (gfir == IO_ILLEGAL_VALUE) {
+ dev_err(&pci_dev->dev,
+ "[%s] %s: GFIR=%016llx\n", __func__,
+ (gfir & GFIR_ERR_TRIGGER) ? "err" : "info",
+ gfir);
+ goto fatal_error;
+ }
+
+ gfir_masked = genwqe_fir_checking(cd);
+ if (gfir_masked == IO_ILLEGAL_VALUE)
+ goto fatal_error;
+
+ /*
+ * GFIR ErrorTrigger bits set => reset the card!
+ * Never do this for old/manufacturing images!
+ */
+ if ((gfir_masked) && !cd->skip_recovery &&
+ genwqe_recovery_on_fatal_gfir_required(cd)) {
+
+ cd->card_state = GENWQE_CARD_FATAL_ERROR;
+
+ rc = genwqe_recover_card(cd, 0);
+ if (rc < 0) {
+ /* FIXME Card is unusable and needs unbind! */
+ goto fatal_error;
+ }
+ }
+
+ cd->last_gfir = gfir;
+ cond_resched();
+ }
+
+ return 0;
+
+ fatal_error:
+ dev_err(&pci_dev->dev,
+ "[%s] card unusable. Please trigger unbind!\n", __func__);
+
+ /* Bring down logical devices to inform user space via udev remove. */
+ cd->card_state = GENWQE_CARD_FATAL_ERROR;
+ genwqe_stop(cd);
+
+ /* genwqe_bus_reset failed(). Now wait for genwqe_remove(). */
+ while (!kthread_should_stop())
+ cond_resched();
+
+ return -EIO;
+}
+
+static int genwqe_health_check_start(struct genwqe_dev *cd)
+{
+ int rc;
+
+ if (genwqe_health_check_interval <= 0)
+ return 0; /* valid for disabling the service */
+
+ /* moved before request_irq() */
+ /* init_waitqueue_head(&cd->health_waitq); */
+
+ cd->health_thread = kthread_run(genwqe_health_thread, cd,
+ GENWQE_DEVNAME "%d_health",
+ cd->card_idx);
+ if (IS_ERR(cd->health_thread)) {
+ rc = PTR_ERR(cd->health_thread);
+ cd->health_thread = NULL;
+ return rc;
+ }
+ return 0;
+}
+
+static int genwqe_health_thread_running(struct genwqe_dev *cd)
+{
+ return cd->health_thread != NULL;
+}
+
+static int genwqe_health_check_stop(struct genwqe_dev *cd)
+{
+ int rc;
+
+ if (!genwqe_health_thread_running(cd))
+ return -EIO;
+
+ rc = kthread_stop(cd->health_thread);
+ cd->health_thread = NULL;
+ return 0;
+}
+
+/**
+ * genwqe_pci_setup() - Allocate PCIe related resources for our card
+ */
+static int genwqe_pci_setup(struct genwqe_dev *cd)
+{
+ int err, bars;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pci_dev);
+ if (err) {
+ dev_err(&pci_dev->dev,
+ "err: failed to enable pci memory (err=%d)\n", err);
+ goto err_out;
+ }
+
+ /* Reserve PCI I/O and memory resources */
+ err = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name);
+ if (err) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: request bars failed (%d)\n", __func__, err);
+ err = -EIO;
+ goto err_disable_device;
+ }
+
+ /* check for 64-bit DMA address supported (DAC) */
+ if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) {
+ err = pci_set_consistent_dma_mask(pci_dev, DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pci_dev->dev,
+ "err: DMA64 consistent mask error\n");
+ err = -EIO;
+ goto out_release_resources;
+ }
+ /* check for 32-bit DMA address supported (SAC) */
+ } else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
+ err = pci_set_consistent_dma_mask(pci_dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pci_dev->dev,
+ "err: DMA32 consistent mask error\n");
+ err = -EIO;
+ goto out_release_resources;
+ }
+ } else {
+ dev_err(&pci_dev->dev,
+ "err: neither DMA32 nor DMA64 supported\n");
+ err = -EIO;
+ goto out_release_resources;
+ }
+
+ pci_set_master(pci_dev);
+ pci_enable_pcie_error_reporting(pci_dev);
+
+ /* request complete BAR-0 space (length = 0) */
+ cd->mmio_len = pci_resource_len(pci_dev, 0);
+ cd->mmio = pci_iomap(pci_dev, 0, 0);
+ if (cd->mmio == NULL) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: mapping BAR0 failed\n", __func__);
+ err = -ENOMEM;
+ goto out_release_resources;
+ }
+
+ cd->num_vfs = pci_sriov_get_totalvfs(pci_dev);
+
+ err = genwqe_read_ids(cd);
+ if (err)
+ goto out_iounmap;
+
+ return 0;
+
+ out_iounmap:
+ pci_iounmap(pci_dev, cd->mmio);
+ out_release_resources:
+ pci_release_selected_regions(pci_dev, bars);
+ err_disable_device:
+ pci_disable_device(pci_dev);
+ err_out:
+ return err;
+}
+
+/**
+ * genwqe_pci_remove() - Free PCIe related resources for our card
+ */
+static void genwqe_pci_remove(struct genwqe_dev *cd)
+{
+ int bars;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (cd->mmio)
+ pci_iounmap(pci_dev, cd->mmio);
+
+ bars = pci_select_bars(pci_dev, IORESOURCE_MEM);
+ pci_release_selected_regions(pci_dev, bars);
+ pci_disable_device(pci_dev);
+}
+
+/**
+ * genwqe_probe() - Device initialization
+ * @pdev: PCI device information struct
+ *
+ * Callable for multiple cards. This function is called on bind.
+ *
+ * Return: 0 if succeeded, < 0 when failed
+ */
+static int genwqe_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
+{
+ int err;
+ struct genwqe_dev *cd;
+
+ genwqe_init_crc32();
+
+ cd = genwqe_dev_alloc();
+ if (IS_ERR(cd)) {
+ dev_err(&pci_dev->dev, "err: could not alloc mem (err=%d)!\n",
+ (int)PTR_ERR(cd));
+ return PTR_ERR(cd);
+ }
+
+ dev_set_drvdata(&pci_dev->dev, cd);
+ cd->pci_dev = pci_dev;
+
+ err = genwqe_pci_setup(cd);
+ if (err < 0) {
+ dev_err(&pci_dev->dev,
+ "err: problems with PCI setup (err=%d)\n", err);
+ goto out_free_dev;
+ }
+
+ err = genwqe_start(cd);
+ if (err < 0) {
+ dev_err(&pci_dev->dev,
+ "err: cannot start card services! (err=%d)\n", err);
+ goto out_pci_remove;
+ }
+
+ if (genwqe_is_privileged(cd)) {
+ err = genwqe_health_check_start(cd);
+ if (err < 0) {
+ dev_err(&pci_dev->dev,
+ "err: cannot start health checking! "
+ "(err=%d)\n", err);
+ goto out_stop_services;
+ }
+ }
+ return 0;
+
+ out_stop_services:
+ genwqe_stop(cd);
+ out_pci_remove:
+ genwqe_pci_remove(cd);
+ out_free_dev:
+ genwqe_dev_free(cd);
+ return err;
+}
+
+/**
+ * genwqe_remove() - Called when device is removed (hot-plugable)
+ *
+ * Or when driver is unloaded respecitively when unbind is done.
+ */
+static void genwqe_remove(struct pci_dev *pci_dev)
+{
+ struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev);
+
+ genwqe_health_check_stop(cd);
+
+ /*
+ * genwqe_stop() must survive if it is called twice
+ * sequentially. This happens when the health thread calls it
+ * and fails on genwqe_bus_reset().
+ */
+ genwqe_stop(cd);
+ genwqe_pci_remove(cd);
+ genwqe_dev_free(cd);
+}
+
+/*
+ * genwqe_err_error_detected() - Error detection callback
+ *
+ * This callback is called by the PCI subsystem whenever a PCI bus
+ * error is detected.
+ */
+static pci_ers_result_t genwqe_err_error_detected(struct pci_dev *pci_dev,
+ enum pci_channel_state state)
+{
+ struct genwqe_dev *cd;
+
+ dev_err(&pci_dev->dev, "[%s] state=%d\n", __func__, state);
+
+ if (pci_dev == NULL)
+ return PCI_ERS_RESULT_NEED_RESET;
+
+ cd = dev_get_drvdata(&pci_dev->dev);
+ if (cd == NULL)
+ return PCI_ERS_RESULT_NEED_RESET;
+
+ switch (state) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t genwqe_err_result_none(struct pci_dev *dev)
+{
+ return PCI_ERS_RESULT_NONE;
+}
+
+static void genwqe_err_resume(struct pci_dev *dev)
+{
+}
+
+static int genwqe_sriov_configure(struct pci_dev *dev, int numvfs)
+{
+ struct genwqe_dev *cd = dev_get_drvdata(&dev->dev);
+
+ if (numvfs > 0) {
+ genwqe_setup_vf_jtimer(cd);
+ pci_enable_sriov(dev, numvfs);
+ return numvfs;
+ }
+ if (numvfs == 0) {
+ pci_disable_sriov(dev);
+ return 0;
+ }
+ return 0;
+}
+
+static struct pci_error_handlers genwqe_err_handler = {
+ .error_detected = genwqe_err_error_detected,
+ .mmio_enabled = genwqe_err_result_none,
+ .link_reset = genwqe_err_result_none,
+ .slot_reset = genwqe_err_result_none,
+ .resume = genwqe_err_resume,
+};
+
+static struct pci_driver genwqe_driver = {
+ .name = genwqe_driver_name,
+ .id_table = genwqe_device_table,
+ .probe = genwqe_probe,
+ .remove = genwqe_remove,
+ .sriov_configure = genwqe_sriov_configure,
+ .err_handler = &genwqe_err_handler,
+};
+
+/**
+ * genwqe_init_module() - Driver registration and initialization
+ */
+static int __init genwqe_init_module(void)
+{
+ int rc;
+
+ class_genwqe = class_create(THIS_MODULE, GENWQE_DEVNAME);
+ if (IS_ERR(class_genwqe)) {
+ pr_err("[%s] create class failed\n", __func__);
+ return -ENOMEM;
+ }
+
+ debugfs_genwqe = debugfs_create_dir(GENWQE_DEVNAME, NULL);
+ if (!debugfs_genwqe) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ rc = pci_register_driver(&genwqe_driver);
+ if (rc != 0) {
+ pr_err("[%s] pci_reg_driver (rc=%d)\n", __func__, rc);
+ goto err_out0;
+ }
+
+ return rc;
+
+ err_out0:
+ debugfs_remove(debugfs_genwqe);
+ err_out:
+ class_destroy(class_genwqe);
+ return rc;
+}
+
+/**
+ * genwqe_exit_module() - Driver exit
+ */
+static void __exit genwqe_exit_module(void)
+{
+ pci_unregister_driver(&genwqe_driver);
+ debugfs_remove(debugfs_genwqe);
+ class_destroy(class_genwqe);
+}
+
+module_init(genwqe_init_module);
+module_exit(genwqe_exit_module);
diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h
new file mode 100644
index 0000000..5e4dbd2
--- /dev/null
+++ b/drivers/misc/genwqe/card_base.h
@@ -0,0 +1,557 @@
+#ifndef __CARD_BASE_H__
+#define __CARD_BASE_H__
+
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Interfaces within the GenWQE module. Defines genwqe_card and
+ * ddcb_queue as well as ddcb_requ.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/stringify.h>
+#include <linux/pci.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+
+#include <linux/genwqe/genwqe_card.h>
+#include "genwqe_driver.h"
+
+#define GENWQE_MSI_IRQS 4 /* Just one supported, no MSIx */
+#define GENWQE_FLAG_MSI_ENABLED (1 << 0)
+
+#define GENWQE_MAX_VFS 15 /* maximum 15 VFs are possible */
+#define GENWQE_MAX_FUNCS 16 /* 1 PF and 15 VFs */
+#define GENWQE_CARD_NO_MAX (16 * GENWQE_MAX_FUNCS)
+
+/* Compile parameters, some of them appear in debugfs for later adjustment */
+#define genwqe_ddcb_max 32 /* DDCBs on the work-queue */
+#define genwqe_polling_enabled 0 /* in case of irqs not working */
+#define genwqe_ddcb_software_timeout 10 /* timeout per DDCB in seconds */
+#define genwqe_kill_timeout 8 /* time until process gets killed */
+#define genwqe_vf_jobtimeout_msec 250 /* 250 msec */
+#define genwqe_pf_jobtimeout_msec 8000 /* 8 sec should be ok */
+#define genwqe_health_check_interval 4 /* <= 0: disabled */
+
+/* Sysfs attribute groups used when we create the genwqe device */
+extern const struct attribute_group *genwqe_attribute_groups[];
+
+/*
+ * Config space for Genwqe5 A7:
+ * 00:[14 10 4b 04]40 00 10 00[00 00 00 12]00 00 00 00
+ * 10: 0c 00 00 f0 07 3c 00 00 00 00 00 00 00 00 00 00
+ * 20: 00 00 00 00 00 00 00 00 00 00 00 00[14 10 4b 04]
+ * 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00
+ */
+#define PCI_DEVICE_GENWQE 0x044b /* Genwqe DeviceID */
+
+#define PCI_SUBSYSTEM_ID_GENWQE5 0x035f /* Genwqe A5 Subsystem-ID */
+#define PCI_SUBSYSTEM_ID_GENWQE5_NEW 0x044b /* Genwqe A5 Subsystem-ID */
+#define PCI_CLASSCODE_GENWQE5 0x1200 /* UNKNOWN */
+
+#define PCI_SUBVENDOR_ID_IBM_SRIOV 0x0000
+#define PCI_SUBSYSTEM_ID_GENWQE5_SRIOV 0x0000 /* Genwqe A5 Subsystem-ID */
+#define PCI_CLASSCODE_GENWQE5_SRIOV 0x1200 /* UNKNOWN */
+
+#define GENWQE_SLU_ARCH_REQ 2 /* Required SLU architecture level */
+
+/**
+ * struct genwqe_reg - Genwqe data dump functionality
+ */
+struct genwqe_reg {
+ u32 addr;
+ u32 idx;
+ u64 val;
+};
+
+/*
+ * enum genwqe_dbg_type - Specify chip unit to dump/debug
+ */
+enum genwqe_dbg_type {
+ GENWQE_DBG_UNIT0 = 0, /* captured before prev errs cleared */
+ GENWQE_DBG_UNIT1 = 1,
+ GENWQE_DBG_UNIT2 = 2,
+ GENWQE_DBG_UNIT3 = 3,
+ GENWQE_DBG_UNIT4 = 4,
+ GENWQE_DBG_UNIT5 = 5,
+ GENWQE_DBG_UNIT6 = 6,
+ GENWQE_DBG_UNIT7 = 7,
+ GENWQE_DBG_REGS = 8,
+ GENWQE_DBG_DMA = 9,
+ GENWQE_DBG_UNITS = 10, /* max number of possible debug units */
+};
+
+/* Software error injection to simulate card failures */
+#define GENWQE_INJECT_HARDWARE_FAILURE 0x00000001 /* injects -1 reg reads */
+#define GENWQE_INJECT_BUS_RESET_FAILURE 0x00000002 /* pci_bus_reset fail */
+#define GENWQE_INJECT_GFIR_FATAL 0x00000004 /* GFIR = 0x0000ffff */
+#define GENWQE_INJECT_GFIR_INFO 0x00000008 /* GFIR = 0xffff0000 */
+
+/*
+ * Genwqe card description and management data.
+ *
+ * Error-handling in case of card malfunction
+ * ------------------------------------------
+ *
+ * If the card is detected to be defective the outside environment
+ * will cause the PCI layer to call deinit (the cleanup function for
+ * probe). This is the same effect like doing a unbind/bind operation
+ * on the card.
+ *
+ * The genwqe card driver implements a health checking thread which
+ * verifies the card function. If this detects a problem the cards
+ * device is being shutdown and restarted again, along with a reset of
+ * the card and queue.
+ *
+ * All functions accessing the card device return either -EIO or -ENODEV
+ * code to indicate the malfunction to the user. The user has to close
+ * the file descriptor and open a new one, once the card becomes
+ * available again.
+ *
+ * If the open file descriptor is setup to receive SIGIO, the signal is
+ * genereated for the application which has to provide a handler to
+ * react on it. If the application does not close the open
+ * file descriptor a SIGKILL is send to enforce freeing the cards
+ * resources.
+ *
+ * I did not find a different way to prevent kernel problems due to
+ * reference counters for the cards character devices getting out of
+ * sync. The character device deallocation does not block, even if
+ * there is still an open file descriptor pending. If this pending
+ * descriptor is closed, the data structures used by the character
+ * device is reinstantiated, which will lead to the reference counter
+ * dropping below the allowed values.
+ *
+ * Card recovery
+ * -------------
+ *
+ * To test the internal driver recovery the following command can be used:
+ * sudo sh -c 'echo 0xfffff > /sys/class/genwqe/genwqe0_card/err_inject'
+ */
+
+
+/**
+ * struct dma_mapping_type - Mapping type definition
+ *
+ * To avoid memcpying data arround we use user memory directly. To do
+ * this we need to pin/swap-in the memory and request a DMA address
+ * for it.
+ */
+enum dma_mapping_type {
+ GENWQE_MAPPING_RAW = 0, /* contignous memory buffer */
+ GENWQE_MAPPING_SGL_TEMP, /* sglist dynamically used */
+ GENWQE_MAPPING_SGL_PINNED, /* sglist used with pinning */
+};
+
+/**
+ * struct dma_mapping - Information about memory mappings done by the driver
+ */
+struct dma_mapping {
+ enum dma_mapping_type type;
+
+ void *u_vaddr; /* user-space vaddr/non-aligned */
+ void *k_vaddr; /* kernel-space vaddr/non-aligned */
+ dma_addr_t dma_addr; /* physical DMA address */
+
+ struct page **page_list; /* list of pages used by user buff */
+ dma_addr_t *dma_list; /* list of dma addresses per page */
+ unsigned int nr_pages; /* number of pages */
+ unsigned int size; /* size in bytes */
+
+ struct list_head card_list; /* list of usr_maps for card */
+ struct list_head pin_list; /* list of pinned memory for dev */
+};
+
+static inline void genwqe_mapping_init(struct dma_mapping *m,
+ enum dma_mapping_type type)
+{
+ memset(m, 0, sizeof(*m));
+ m->type = type;
+}
+
+/**
+ * struct ddcb_queue - DDCB queue data
+ * @ddcb_max: Number of DDCBs on the queue
+ * @ddcb_next: Next free DDCB
+ * @ddcb_act: Next DDCB supposed to finish
+ * @ddcb_seq: Sequence number of last DDCB
+ * @ddcbs_in_flight: Currently enqueued DDCBs
+ * @ddcbs_completed: Number of already completed DDCBs
+ * @busy: Number of -EBUSY returns
+ * @ddcb_daddr: DMA address of first DDCB in the queue
+ * @ddcb_vaddr: Kernel virtual address of first DDCB in the queue
+ * @ddcb_req: Associated requests (one per DDCB)
+ * @ddcb_waitqs: Associated wait queues (one per DDCB)
+ * @ddcb_lock: Lock to protect queuing operations
+ * @ddcb_waitq: Wait on next DDCB finishing
+ */
+
+struct ddcb_queue {
+ int ddcb_max; /* amount of DDCBs */
+ int ddcb_next; /* next available DDCB num */
+ int ddcb_act; /* DDCB to be processed */
+ u16 ddcb_seq; /* slc seq num */
+ unsigned int ddcbs_in_flight; /* number of ddcbs in processing */
+ unsigned int ddcbs_completed;
+ unsigned int ddcbs_max_in_flight;
+ unsigned int busy; /* how many times -EBUSY? */
+
+ dma_addr_t ddcb_daddr; /* DMA address */
+ struct ddcb *ddcb_vaddr; /* kernel virtual addr for DDCBs */
+ struct ddcb_requ **ddcb_req; /* ddcb processing parameter */
+ wait_queue_head_t *ddcb_waitqs; /* waitqueue per ddcb */
+
+ spinlock_t ddcb_lock; /* exclusive access to queue */
+ wait_queue_head_t ddcb_waitq; /* wait for ddcb processing */
+
+ /* registers or the respective queue to be used */
+ u32 IO_QUEUE_CONFIG;
+ u32 IO_QUEUE_STATUS;
+ u32 IO_QUEUE_SEGMENT;
+ u32 IO_QUEUE_INITSQN;
+ u32 IO_QUEUE_WRAP;
+ u32 IO_QUEUE_OFFSET;
+ u32 IO_QUEUE_WTIME;
+ u32 IO_QUEUE_ERRCNTS;
+ u32 IO_QUEUE_LRW;
+};
+
+/*
+ * GFIR, SLU_UNITCFG, APP_UNITCFG
+ * 8 Units with FIR/FEC + 64 * 2ndary FIRS/FEC.
+ */
+#define GENWQE_FFDC_REGS (3 + (8 * (2 + 2 * 64)))
+
+struct genwqe_ffdc {
+ unsigned int entries;
+ struct genwqe_reg *regs;
+};
+
+/**
+ * struct genwqe_dev - GenWQE device information
+ * @card_state: Card operation state, see above
+ * @ffdc: First Failure Data Capture buffers for each unit
+ * @card_thread: Working thread to operate the DDCB queue
+ * @card_waitq: Wait queue used in card_thread
+ * @queue: DDCB queue
+ * @health_thread: Card monitoring thread (only for PFs)
+ * @health_waitq: Wait queue used in health_thread
+ * @pci_dev: Associated PCI device (function)
+ * @mmio: Base address of 64-bit register space
+ * @mmio_len: Length of register area
+ * @file_lock: Lock to protect access to file_list
+ * @file_list: List of all processes with open GenWQE file descriptors
+ *
+ * This struct contains all information needed to communicate with a
+ * GenWQE card. It is initialized when a GenWQE device is found and
+ * destroyed when it goes away. It holds data to maintain the queue as
+ * well as data needed to feed the user interfaces.
+ */
+struct genwqe_dev {
+ enum genwqe_card_state card_state;
+ spinlock_t print_lock;
+
+ int card_idx; /* card index 0..CARD_NO_MAX-1 */
+ u64 flags; /* general flags */
+
+ /* FFDC data gathering */
+ struct genwqe_ffdc ffdc[GENWQE_DBG_UNITS];
+
+ /* DDCB workqueue */
+ struct task_struct *card_thread;
+ wait_queue_head_t queue_waitq;
+ struct ddcb_queue queue; /* genwqe DDCB queue */
+ unsigned int irqs_processed;
+
+ /* Card health checking thread */
+ struct task_struct *health_thread;
+ wait_queue_head_t health_waitq;
+
+ /* char device */
+ dev_t devnum_genwqe; /* major/minor num card */
+ struct class *class_genwqe; /* reference to class object */
+ struct device *dev; /* for device creation */
+ struct cdev cdev_genwqe; /* char device for card */
+
+ struct dentry *debugfs_root; /* debugfs card root directory */
+ struct dentry *debugfs_genwqe; /* debugfs driver root directory */
+
+ /* pci resources */
+ struct pci_dev *pci_dev; /* PCI device */
+ void __iomem *mmio; /* BAR-0 MMIO start */
+ unsigned long mmio_len;
+ u16 num_vfs;
+ u32 vf_jobtimeout_msec[GENWQE_MAX_VFS];
+ int is_privileged; /* access to all regs possible */
+
+ /* config regs which we need often */
+ u64 slu_unitcfg;
+ u64 app_unitcfg;
+ u64 softreset;
+ u64 err_inject;
+ u64 last_gfir;
+ char app_name[5];
+
+ spinlock_t file_lock; /* lock for open files */
+ struct list_head file_list; /* list of open files */
+
+ /* debugfs parameters */
+ int ddcb_software_timeout; /* wait until DDCB times out */
+ int skip_recovery; /* circumvention if recovery fails */
+ int kill_timeout; /* wait after sending SIGKILL */
+};
+
+/**
+ * enum genwqe_requ_state - State of a DDCB execution request
+ */
+enum genwqe_requ_state {
+ GENWQE_REQU_NEW = 0,
+ GENWQE_REQU_ENQUEUED = 1,
+ GENWQE_REQU_TAPPED = 2,
+ GENWQE_REQU_FINISHED = 3,
+ GENWQE_REQU_STATE_MAX,
+};
+
+/**
+ * struct ddcb_requ - Kernel internal representation of the DDCB request
+ * @cmd: User space representation of the DDCB execution request
+ */
+struct ddcb_requ {
+ /* kernel specific content */
+ enum genwqe_requ_state req_state; /* request status */
+ int num; /* ddcb_no for this request */
+ struct ddcb_queue *queue; /* associated queue */
+
+ struct dma_mapping dma_mappings[DDCB_FIXUPS];
+ struct sg_entry *sgl[DDCB_FIXUPS];
+ dma_addr_t sgl_dma_addr[DDCB_FIXUPS];
+ size_t sgl_size[DDCB_FIXUPS];
+
+ /* kernel/user shared content */
+ struct genwqe_ddcb_cmd cmd; /* ddcb_no for this request */
+ struct genwqe_debug_data debug_data;
+};
+
+/**
+ * struct genwqe_file - Information for open GenWQE devices
+ */
+struct genwqe_file {
+ struct genwqe_dev *cd;
+ struct genwqe_driver *client;
+ struct file *filp;
+
+ struct fasync_struct *async_queue;
+ struct task_struct *owner;
+ struct list_head list; /* entry in list of open files */
+
+ spinlock_t map_lock; /* lock for dma_mappings */
+ struct list_head map_list; /* list of dma_mappings */
+
+ spinlock_t pin_lock; /* lock for pinned memory */
+ struct list_head pin_list; /* list of pinned memory */
+};
+
+int genwqe_setup_service_layer(struct genwqe_dev *cd); /* for PF only */
+int genwqe_finish_queue(struct genwqe_dev *cd);
+int genwqe_release_service_layer(struct genwqe_dev *cd);
+
+/**
+ * genwqe_get_slu_id() - Read Service Layer Unit Id
+ * Return: 0x00: Development code
+ * 0x01: SLC1 (old)
+ * 0x02: SLC2 (sept2012)
+ * 0x03: SLC2 (feb2013, generic driver)
+ */
+static inline int genwqe_get_slu_id(struct genwqe_dev *cd)
+{
+ return (int)((cd->slu_unitcfg >> 32) & 0xff);
+}
+
+int genwqe_ddcbs_in_flight(struct genwqe_dev *cd);
+
+u8 genwqe_card_type(struct genwqe_dev *cd);
+int genwqe_card_reset(struct genwqe_dev *cd);
+int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count);
+void genwqe_reset_interrupt_capability(struct genwqe_dev *cd);
+
+int genwqe_device_create(struct genwqe_dev *cd);
+int genwqe_device_remove(struct genwqe_dev *cd);
+
+/* debugfs */
+int genwqe_init_debugfs(struct genwqe_dev *cd);
+void genqwe_exit_debugfs(struct genwqe_dev *cd);
+
+int genwqe_read_softreset(struct genwqe_dev *cd);
+
+/* Hardware Circumventions */
+int genwqe_recovery_on_fatal_gfir_required(struct genwqe_dev *cd);
+int genwqe_flash_readback_fails(struct genwqe_dev *cd);
+
+/**
+ * genwqe_write_vreg() - Write register in VF window
+ * @cd: genwqe device
+ * @reg: register address
+ * @val: value to write
+ * @func: 0: PF, 1: VF0, ..., 15: VF14
+ */
+int genwqe_write_vreg(struct genwqe_dev *cd, u32 reg, u64 val, int func);
+
+/**
+ * genwqe_read_vreg() - Read register in VF window
+ * @cd: genwqe device
+ * @reg: register address
+ * @func: 0: PF, 1: VF0, ..., 15: VF14
+ *
+ * Return: content of the register
+ */
+u64 genwqe_read_vreg(struct genwqe_dev *cd, u32 reg, int func);
+
+/* FFDC Buffer Management */
+int genwqe_ffdc_buff_size(struct genwqe_dev *cd, int unit_id);
+int genwqe_ffdc_buff_read(struct genwqe_dev *cd, int unit_id,
+ struct genwqe_reg *regs, unsigned int max_regs);
+int genwqe_read_ffdc_regs(struct genwqe_dev *cd, struct genwqe_reg *regs,
+ unsigned int max_regs, int all);
+int genwqe_ffdc_dump_dma(struct genwqe_dev *cd,
+ struct genwqe_reg *regs, unsigned int max_regs);
+
+int genwqe_init_debug_data(struct genwqe_dev *cd,
+ struct genwqe_debug_data *d);
+
+void genwqe_init_crc32(void);
+int genwqe_read_app_id(struct genwqe_dev *cd, char *app_name, int len);
+
+/* Memory allocation/deallocation; dma address handling */
+int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m,
+ void *uaddr, unsigned long size,
+ struct ddcb_requ *req);
+
+int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m,
+ struct ddcb_requ *req);
+
+struct sg_entry *genwqe_alloc_sgl(struct genwqe_dev *cd, int num_pages,
+ dma_addr_t *dma_addr, size_t *sgl_size);
+
+void genwqe_free_sgl(struct genwqe_dev *cd, struct sg_entry *sg_list,
+ dma_addr_t dma_addr, size_t size);
+
+int genwqe_setup_sgl(struct genwqe_dev *cd,
+ unsigned long offs,
+ unsigned long size,
+ struct sg_entry *sgl, /* genwqe sgl */
+ dma_addr_t dma_addr, size_t sgl_size,
+ dma_addr_t *dma_list, int page_offs, int num_pages);
+
+int genwqe_check_sgl(struct genwqe_dev *cd, struct sg_entry *sg_list,
+ int size);
+
+static inline bool dma_mapping_used(struct dma_mapping *m)
+{
+ if (!m)
+ return 0;
+ return m->size != 0;
+}
+
+/**
+ * __genwqe_execute_ddcb() - Execute DDCB request with addr translation
+ *
+ * This function will do the address translation changes to the DDCBs
+ * according to the definitions required by the ATS field. It looks up
+ * the memory allocation buffer or does vmap/vunmap for the respective
+ * user-space buffers, inclusive page pinning and scatter gather list
+ * buildup and teardown.
+ */
+int __genwqe_execute_ddcb(struct genwqe_dev *cd,
+ struct genwqe_ddcb_cmd *cmd);
+
+/**
+ * __genwqe_execute_raw_ddcb() - Execute DDCB request without addr translation
+ *
+ * This version will not do address translation or any modifcation of
+ * the DDCB data. It is used e.g. for the MoveFlash DDCB which is
+ * entirely prepared by the driver itself. That means the appropriate
+ * DMA addresses are already in the DDCB and do not need any
+ * modification.
+ */
+int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd,
+ struct genwqe_ddcb_cmd *cmd);
+
+int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req);
+int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req);
+int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req);
+
+/* register access */
+int __genwqe_writeq(struct genwqe_dev *cd, u64 byte_offs, u64 val);
+u64 __genwqe_readq(struct genwqe_dev *cd, u64 byte_offs);
+int __genwqe_writel(struct genwqe_dev *cd, u64 byte_offs, u32 val);
+u32 __genwqe_readl(struct genwqe_dev *cd, u64 byte_offs);
+
+void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size,
+ dma_addr_t *dma_handle);
+void __genwqe_free_consistent(struct genwqe_dev *cd, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+/* Base clock frequency in MHz */
+int genwqe_base_clock_frequency(struct genwqe_dev *cd);
+
+/* Before FFDC is captured the traps should be stopped. */
+void genwqe_stop_traps(struct genwqe_dev *cd);
+void genwqe_start_traps(struct genwqe_dev *cd);
+
+/* Hardware circumvention */
+bool genwqe_need_err_masking(struct genwqe_dev *cd);
+
+/**
+ * genwqe_is_privileged() - Determine operation mode for PCI function
+ *
+ * On Intel with SRIOV support we see:
+ * PF: is_physfn = 1 is_virtfn = 0
+ * VF: is_physfn = 0 is_virtfn = 1
+ *
+ * On Systems with no SRIOV support _and_ virtualized systems we get:
+ * is_physfn = 0 is_virtfn = 0
+ *
+ * Other vendors have individual pci device ids to distinguish between
+ * virtual function drivers and physical function drivers. GenWQE
+ * unfortunately has just on pci device id for both, VFs and PF.
+ *
+ * The following code is used to distinguish if the card is running in
+ * privileged mode, either as true PF or in a virtualized system with
+ * full register access e.g. currently on PowerPC.
+ *
+ * if (pci_dev->is_virtfn)
+ * cd->is_privileged = 0;
+ * else
+ * cd->is_privileged = (__genwqe_readq(cd, IO_SLU_BITSTREAM)
+ * != IO_ILLEGAL_VALUE);
+ */
+static inline int genwqe_is_privileged(struct genwqe_dev *cd)
+{
+ return cd->is_privileged;
+}
+
+#endif /* __CARD_BASE_H__ */
diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c
new file mode 100644
index 0000000..6f1acc0
--- /dev/null
+++ b/drivers/misc/genwqe/card_ddcb.c
@@ -0,0 +1,1376 @@
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Device Driver Control Block (DDCB) queue support. Definition of
+ * interrupt handlers for queue support as well as triggering the
+ * health monitor code in case of problems. The current hardware uses
+ * an MSI interrupt which is shared between error handling and
+ * functional code.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/crc-itu-t.h>
+
+#include "card_base.h"
+#include "card_ddcb.h"
+
+/*
+ * N: next DDCB, this is where the next DDCB will be put.
+ * A: active DDCB, this is where the code will look for the next completion.
+ * x: DDCB is enqueued, we are waiting for its completion.
+
+ * Situation (1): Empty queue
+ * +---+---+---+---+---+---+---+---+
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | | | | | | | | |
+ * +---+---+---+---+---+---+---+---+
+ * A/N
+ * enqueued_ddcbs = A - N = 2 - 2 = 0
+ *
+ * Situation (2): Wrapped, N > A
+ * +---+---+---+---+---+---+---+---+
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | | | x | x | | | | |
+ * +---+---+---+---+---+---+---+---+
+ * A N
+ * enqueued_ddcbs = N - A = 4 - 2 = 2
+ *
+ * Situation (3): Queue wrapped, A > N
+ * +---+---+---+---+---+---+---+---+
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | x | x | | | x | x | x | x |
+ * +---+---+---+---+---+---+---+---+
+ * N A
+ * enqueued_ddcbs = queue_max - (A - N) = 8 - (4 - 2) = 6
+ *
+ * Situation (4a): Queue full N > A
+ * +---+---+---+---+---+---+---+---+
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | x | x | x | x | x | x | x | |
+ * +---+---+---+---+---+---+---+---+
+ * A N
+ *
+ * enqueued_ddcbs = N - A = 7 - 0 = 7
+ *
+ * Situation (4a): Queue full A > N
+ * +---+---+---+---+---+---+---+---+
+ * | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
+ * | x | x | x | | x | x | x | x |
+ * +---+---+---+---+---+---+---+---+
+ * N A
+ * enqueued_ddcbs = queue_max - (A - N) = 8 - (4 - 3) = 7
+ */
+
+static int queue_empty(struct ddcb_queue *queue)
+{
+ return queue->ddcb_next == queue->ddcb_act;
+}
+
+static int queue_enqueued_ddcbs(struct ddcb_queue *queue)
+{
+ if (queue->ddcb_next >= queue->ddcb_act)
+ return queue->ddcb_next - queue->ddcb_act;
+
+ return queue->ddcb_max - (queue->ddcb_act - queue->ddcb_next);
+}
+
+static int queue_free_ddcbs(struct ddcb_queue *queue)
+{
+ int free_ddcbs = queue->ddcb_max - queue_enqueued_ddcbs(queue) - 1;
+
+ if (WARN_ON_ONCE(free_ddcbs < 0)) { /* must never ever happen! */
+ return 0;
+ }
+ return free_ddcbs;
+}
+
+/*
+ * Use of the PRIV field in the DDCB for queue debugging:
+ *
+ * (1) Trying to get rid of a DDCB which saw a timeout:
+ * pddcb->priv[6] = 0xcc; # cleared
+ *
+ * (2) Append a DDCB via NEXT bit:
+ * pddcb->priv[7] = 0xaa; # appended
+ *
+ * (3) DDCB needed tapping:
+ * pddcb->priv[7] = 0xbb; # tapped
+ *
+ * (4) DDCB marked as correctly finished:
+ * pddcb->priv[6] = 0xff; # finished
+ */
+
+static inline void ddcb_mark_tapped(struct ddcb *pddcb)
+{
+ pddcb->priv[7] = 0xbb; /* tapped */
+}
+
+static inline void ddcb_mark_appended(struct ddcb *pddcb)
+{
+ pddcb->priv[7] = 0xaa; /* appended */
+}
+
+static inline void ddcb_mark_cleared(struct ddcb *pddcb)
+{
+ pddcb->priv[6] = 0xcc; /* cleared */
+}
+
+static inline void ddcb_mark_finished(struct ddcb *pddcb)
+{
+ pddcb->priv[6] = 0xff; /* finished */
+}
+
+static inline void ddcb_mark_unused(struct ddcb *pddcb)
+{
+ pddcb->priv_64 = cpu_to_be64(0); /* not tapped */
+}
+
+/**
+ * genwqe_crc16() - Generate 16-bit crc as required for DDCBs
+ * @buff: pointer to data buffer
+ * @len: length of data for calculation
+ * @init: initial crc (0xffff at start)
+ *
+ * Polynomial = x^16 + x^12 + x^5 + 1 (0x1021)
+ * Example: 4 bytes 0x01 0x02 0x03 0x04 with init = 0xffff
+ * should result in a crc16 of 0x89c3
+ *
+ * Return: crc16 checksum in big endian format !
+ */
+static inline u16 genwqe_crc16(const u8 *buff, size_t len, u16 init)
+{
+ return crc_itu_t(init, buff, len);
+}
+
+static void print_ddcb_info(struct genwqe_dev *cd, struct ddcb_queue *queue)
+{
+ int i;
+ struct ddcb *pddcb;
+ unsigned long flags;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ spin_lock_irqsave(&cd->print_lock, flags);
+
+ dev_info(&pci_dev->dev,
+ "DDCB list for card #%d (ddcb_act=%d / ddcb_next=%d):\n",
+ cd->card_idx, queue->ddcb_act, queue->ddcb_next);
+
+ pddcb = queue->ddcb_vaddr;
+ for (i = 0; i < queue->ddcb_max; i++) {
+ dev_err(&pci_dev->dev,
+ " %c %-3d: RETC=%03x SEQ=%04x "
+ "HSI=%02X SHI=%02x PRIV=%06llx CMD=%03x\n",
+ i == queue->ddcb_act ? '>' : ' ',
+ i,
+ be16_to_cpu(pddcb->retc_16),
+ be16_to_cpu(pddcb->seqnum_16),
+ pddcb->hsi,
+ pddcb->shi,
+ be64_to_cpu(pddcb->priv_64),
+ pddcb->cmd);
+ pddcb++;
+ }
+ spin_unlock_irqrestore(&cd->print_lock, flags);
+}
+
+struct genwqe_ddcb_cmd *ddcb_requ_alloc(void)
+{
+ struct ddcb_requ *req;
+
+ req = kzalloc(sizeof(*req), GFP_ATOMIC);
+ if (!req)
+ return NULL;
+
+ return &req->cmd;
+}
+
+void ddcb_requ_free(struct genwqe_ddcb_cmd *cmd)
+{
+ struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd);
+ kfree(req);
+}
+
+static inline enum genwqe_requ_state ddcb_requ_get_state(struct ddcb_requ *req)
+{
+ return req->req_state;
+}
+
+static inline void ddcb_requ_set_state(struct ddcb_requ *req,
+ enum genwqe_requ_state new_state)
+{
+ req->req_state = new_state;
+}
+
+static inline int ddcb_requ_collect_debug_data(struct ddcb_requ *req)
+{
+ return req->cmd.ddata_addr != 0x0;
+}
+
+/**
+ * ddcb_requ_finished() - Returns the hardware state of the associated DDCB
+ * @cd: pointer to genwqe device descriptor
+ * @req: DDCB work request
+ *
+ * Status of ddcb_requ mirrors this hardware state, but is copied in
+ * the ddcb_requ on interrupt/polling function. The lowlevel code
+ * should check the hardware state directly, the higher level code
+ * should check the copy.
+ *
+ * This function will also return true if the state of the queue is
+ * not GENWQE_CARD_USED. This enables us to purge all DDCBs in the
+ * shutdown case.
+ */
+static int ddcb_requ_finished(struct genwqe_dev *cd, struct ddcb_requ *req)
+{
+ return (ddcb_requ_get_state(req) == GENWQE_REQU_FINISHED) ||
+ (cd->card_state != GENWQE_CARD_USED);
+}
+
+/**
+ * enqueue_ddcb() - Enqueue a DDCB
+ * @cd: pointer to genwqe device descriptor
+ * @queue: queue this operation should be done on
+ * @ddcb_no: pointer to ddcb number being tapped
+ *
+ * Start execution of DDCB by tapping or append to queue via NEXT
+ * bit. This is done by an atomic 'compare and swap' instruction and
+ * checking SHI and HSI of the previous DDCB.
+ *
+ * This function must only be called with ddcb_lock held.
+ *
+ * Return: 1 if new DDCB is appended to previous
+ * 2 if DDCB queue is tapped via register/simulation
+ */
+#define RET_DDCB_APPENDED 1
+#define RET_DDCB_TAPPED 2
+
+static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue,
+ struct ddcb *pddcb, int ddcb_no)
+{
+ unsigned int try;
+ int prev_no;
+ struct ddcb *prev_ddcb;
+ __be32 old, new, icrc_hsi_shi;
+ u64 num;
+
+ /*
+ * For performance checks a Dispatch Timestamp can be put into
+ * DDCB It is supposed to use the SLU's free running counter,
+ * but this requires PCIe cycles.
+ */
+ ddcb_mark_unused(pddcb);
+
+ /* check previous DDCB if already fetched */
+ prev_no = (ddcb_no == 0) ? queue->ddcb_max - 1 : ddcb_no - 1;
+ prev_ddcb = &queue->ddcb_vaddr[prev_no];
+
+ /*
+ * It might have happened that the HSI.FETCHED bit is
+ * set. Retry in this case. Therefore I expect maximum 2 times
+ * trying.
+ */
+ ddcb_mark_appended(pddcb);
+ for (try = 0; try < 2; try++) {
+ old = prev_ddcb->icrc_hsi_shi_32; /* read SHI/HSI in BE32 */
+
+ /* try to append via NEXT bit if prev DDCB is not completed */
+ if ((old & DDCB_COMPLETED_BE32) != 0x00000000)
+ break;
+
+ new = (old | DDCB_NEXT_BE32);
+ icrc_hsi_shi = cmpxchg(&prev_ddcb->icrc_hsi_shi_32, old, new);
+
+ if (icrc_hsi_shi == old)
+ return RET_DDCB_APPENDED; /* appended to queue */
+ }
+
+ /* Queue must be re-started by updating QUEUE_OFFSET */
+ ddcb_mark_tapped(pddcb);
+ num = (u64)ddcb_no << 8;
+ __genwqe_writeq(cd, queue->IO_QUEUE_OFFSET, num); /* start queue */
+
+ return RET_DDCB_TAPPED;
+}
+
+/**
+ * copy_ddcb_results() - Copy output state from real DDCB to request
+ *
+ * Copy DDCB ASV to request struct. There is no endian
+ * conversion made, since data structure in ASV is still
+ * unknown here.
+ *
+ * This is needed by:
+ * - genwqe_purge_ddcb()
+ * - genwqe_check_ddcb_queue()
+ */
+static void copy_ddcb_results(struct ddcb_requ *req, int ddcb_no)
+{
+ struct ddcb_queue *queue = req->queue;
+ struct ddcb *pddcb = &queue->ddcb_vaddr[req->num];
+
+ memcpy(&req->cmd.asv[0], &pddcb->asv[0], DDCB_ASV_LENGTH);
+
+ /* copy status flags of the variant part */
+ req->cmd.vcrc = be16_to_cpu(pddcb->vcrc_16);
+ req->cmd.deque_ts = be64_to_cpu(pddcb->deque_ts_64);
+ req->cmd.cmplt_ts = be64_to_cpu(pddcb->cmplt_ts_64);
+
+ req->cmd.attn = be16_to_cpu(pddcb->attn_16);
+ req->cmd.progress = be32_to_cpu(pddcb->progress_32);
+ req->cmd.retc = be16_to_cpu(pddcb->retc_16);
+
+ if (ddcb_requ_collect_debug_data(req)) {
+ int prev_no = (ddcb_no == 0) ?
+ queue->ddcb_max - 1 : ddcb_no - 1;
+ struct ddcb *prev_pddcb = &queue->ddcb_vaddr[prev_no];
+
+ memcpy(&req->debug_data.ddcb_finished, pddcb,
+ sizeof(req->debug_data.ddcb_finished));
+ memcpy(&req->debug_data.ddcb_prev, prev_pddcb,
+ sizeof(req->debug_data.ddcb_prev));
+ }
+}
+
+/**
+ * genwqe_check_ddcb_queue() - Checks DDCB queue for completed work equests.
+ * @cd: pointer to genwqe device descriptor
+ *
+ * Return: Number of DDCBs which were finished
+ */
+static int genwqe_check_ddcb_queue(struct genwqe_dev *cd,
+ struct ddcb_queue *queue)
+{
+ unsigned long flags;
+ int ddcbs_finished = 0;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ spin_lock_irqsave(&queue->ddcb_lock, flags);
+
+ /* FIXME avoid soft locking CPU */
+ while (!queue_empty(queue) && (ddcbs_finished < queue->ddcb_max)) {
+
+ struct ddcb *pddcb;
+ struct ddcb_requ *req;
+ u16 vcrc, vcrc_16, retc_16;
+
+ pddcb = &queue->ddcb_vaddr[queue->ddcb_act];
+
+ if ((pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) ==
+ 0x00000000)
+ goto go_home; /* not completed, continue waiting */
+
+ /* Note: DDCB could be purged */
+
+ req = queue->ddcb_req[queue->ddcb_act];
+ if (req == NULL) {
+ /* this occurs if DDCB is purged, not an error */
+ /* Move active DDCB further; Nothing to do anymore. */
+ goto pick_next_one;
+ }
+
+ /*
+ * HSI=0x44 (fetched and completed), but RETC is
+ * 0x101, or even worse 0x000.
+ *
+ * In case of seeing the queue in inconsistent state
+ * we read the errcnts and the queue status to provide
+ * a trigger for our PCIe analyzer stop capturing.
+ */
+ retc_16 = be16_to_cpu(pddcb->retc_16);
+ if ((pddcb->hsi == 0x44) && (retc_16 <= 0x101)) {
+ u64 errcnts, status;
+ u64 ddcb_offs = (u64)pddcb - (u64)queue->ddcb_vaddr;
+
+ errcnts = __genwqe_readq(cd, queue->IO_QUEUE_ERRCNTS);
+ status = __genwqe_readq(cd, queue->IO_QUEUE_STATUS);
+
+ dev_err(&pci_dev->dev,
+ "[%s] SEQN=%04x HSI=%02x RETC=%03x "
+ " Q_ERRCNTS=%016llx Q_STATUS=%016llx\n"
+ " DDCB_DMA_ADDR=%016llx\n",
+ __func__, be16_to_cpu(pddcb->seqnum_16),
+ pddcb->hsi, retc_16, errcnts, status,
+ queue->ddcb_daddr + ddcb_offs);
+ }
+
+ copy_ddcb_results(req, queue->ddcb_act);
+ queue->ddcb_req[queue->ddcb_act] = NULL; /* take from queue */
+
+ dev_dbg(&pci_dev->dev, "FINISHED DDCB#%d\n", req->num);
+ genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb));
+
+ ddcb_mark_finished(pddcb);
+
+ /* calculate CRC_16 to see if VCRC is correct */
+ vcrc = genwqe_crc16(pddcb->asv,
+ VCRC_LENGTH(req->cmd.asv_length),
+ 0xffff);
+ vcrc_16 = be16_to_cpu(pddcb->vcrc_16);
+ if (vcrc != vcrc_16) {
+ printk_ratelimited(KERN_ERR
+ "%s %s: err: wrong VCRC pre=%02x vcrc_len=%d "
+ "bytes vcrc_data=%04x is not vcrc_card=%04x\n",
+ GENWQE_DEVNAME, dev_name(&pci_dev->dev),
+ pddcb->pre, VCRC_LENGTH(req->cmd.asv_length),
+ vcrc, vcrc_16);
+ }
+
+ ddcb_requ_set_state(req, GENWQE_REQU_FINISHED);
+ queue->ddcbs_completed++;
+ queue->ddcbs_in_flight--;
+
+ /* wake up process waiting for this DDCB */
+ wake_up_interruptible(&queue->ddcb_waitqs[queue->ddcb_act]);
+
+pick_next_one:
+ queue->ddcb_act = (queue->ddcb_act + 1) % queue->ddcb_max;
+ ddcbs_finished++;
+ }
+
+ go_home:
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ return ddcbs_finished;
+}
+
+/**
+ * __genwqe_wait_ddcb(): Waits until DDCB is completed
+ * @cd: pointer to genwqe device descriptor
+ * @req: pointer to requsted DDCB parameters
+ *
+ * The Service Layer will update the RETC in DDCB when processing is
+ * pending or done.
+ *
+ * Return: > 0 remaining jiffies, DDCB completed
+ * -ETIMEDOUT when timeout
+ * -ERESTARTSYS when ^C
+ * -EINVAL when unknown error condition
+ *
+ * When an error is returned the called needs to ensure that
+ * purge_ddcb() is being called to get the &req removed from the
+ * queue.
+ */
+int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req)
+{
+ int rc;
+ unsigned int ddcb_no;
+ struct ddcb_queue *queue;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (req == NULL)
+ return -EINVAL;
+
+ queue = req->queue;
+ if (queue == NULL)
+ return -EINVAL;
+
+ ddcb_no = req->num;
+ if (ddcb_no >= queue->ddcb_max)
+ return -EINVAL;
+
+ rc = wait_event_interruptible_timeout(queue->ddcb_waitqs[ddcb_no],
+ ddcb_requ_finished(cd, req),
+ genwqe_ddcb_software_timeout * HZ);
+
+ /*
+ * We need to distinguish 3 cases here:
+ * 1. rc == 0 timeout occured
+ * 2. rc == -ERESTARTSYS signal received
+ * 3. rc > 0 remaining jiffies condition is true
+ */
+ if (rc == 0) {
+ struct ddcb_queue *queue = req->queue;
+ struct ddcb *pddcb;
+
+ /*
+ * Timeout may be caused by long task switching time.
+ * When timeout happens, check if the request has
+ * meanwhile completed.
+ */
+ genwqe_check_ddcb_queue(cd, req->queue);
+ if (ddcb_requ_finished(cd, req))
+ return rc;
+
+ dev_err(&pci_dev->dev,
+ "[%s] err: DDCB#%d timeout rc=%d state=%d req @ %p\n",
+ __func__, req->num, rc, ddcb_requ_get_state(req),
+ req);
+ dev_err(&pci_dev->dev,
+ "[%s] IO_QUEUE_STATUS=0x%016llx\n", __func__,
+ __genwqe_readq(cd, queue->IO_QUEUE_STATUS));
+
+ pddcb = &queue->ddcb_vaddr[req->num];
+ genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb));
+
+ print_ddcb_info(cd, req->queue);
+ return -ETIMEDOUT;
+
+ } else if (rc == -ERESTARTSYS) {
+ return rc;
+ /*
+ * EINTR: Stops the application
+ * ERESTARTSYS: Restartable systemcall; called again
+ */
+
+ } else if (rc < 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: DDCB#%d unknown result (rc=%d) %d!\n",
+ __func__, req->num, rc, ddcb_requ_get_state(req));
+ return -EINVAL;
+ }
+
+ /* Severe error occured. Driver is forced to stop operation */
+ if (cd->card_state != GENWQE_CARD_USED) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: DDCB#%d forced to stop (rc=%d)\n",
+ __func__, req->num, rc);
+ return -EIO;
+ }
+ return rc;
+}
+
+/**
+ * get_next_ddcb() - Get next available DDCB
+ * @cd: pointer to genwqe device descriptor
+ *
+ * DDCB's content is completely cleared but presets for PRE and
+ * SEQNUM. This function must only be called when ddcb_lock is held.
+ *
+ * Return: NULL if no empty DDCB available otherwise ptr to next DDCB.
+ */
+static struct ddcb *get_next_ddcb(struct genwqe_dev *cd,
+ struct ddcb_queue *queue,
+ int *num)
+{
+ u64 *pu64;
+ struct ddcb *pddcb;
+
+ if (queue_free_ddcbs(queue) == 0) /* queue is full */
+ return NULL;
+
+ /* find new ddcb */
+ pddcb = &queue->ddcb_vaddr[queue->ddcb_next];
+
+ /* if it is not completed, we are not allowed to use it */
+ /* barrier(); */
+ if ((pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) == 0x00000000)
+ return NULL;
+
+ *num = queue->ddcb_next; /* internal DDCB number */
+ queue->ddcb_next = (queue->ddcb_next + 1) % queue->ddcb_max;
+
+ /* clear important DDCB fields */
+ pu64 = (u64 *)pddcb;
+ pu64[0] = 0ULL; /* offs 0x00 (ICRC,HSI,SHI,...) */
+ pu64[1] = 0ULL; /* offs 0x01 (ACFUNC,CMD...) */
+
+ /* destroy previous results in ASV */
+ pu64[0x80/8] = 0ULL; /* offs 0x80 (ASV + 0) */
+ pu64[0x88/8] = 0ULL; /* offs 0x88 (ASV + 0x08) */
+ pu64[0x90/8] = 0ULL; /* offs 0x90 (ASV + 0x10) */
+ pu64[0x98/8] = 0ULL; /* offs 0x98 (ASV + 0x18) */
+ pu64[0xd0/8] = 0ULL; /* offs 0xd0 (RETC,ATTN...) */
+
+ pddcb->pre = DDCB_PRESET_PRE; /* 128 */
+ pddcb->seqnum_16 = cpu_to_be16(queue->ddcb_seq++);
+ return pddcb;
+}
+
+/**
+ * __genwqe_purge_ddcb() - Remove a DDCB from the workqueue
+ * @cd: genwqe device descriptor
+ * @req: DDCB request
+ *
+ * This will fail when the request was already FETCHED. In this case
+ * we need to wait until it is finished. Else the DDCB can be
+ * reused. This function also ensures that the request data structure
+ * is removed from ddcb_req[].
+ *
+ * Do not forget to call this function when genwqe_wait_ddcb() fails,
+ * such that the request gets really removed from ddcb_req[].
+ *
+ * Return: 0 success
+ */
+int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req)
+{
+ struct ddcb *pddcb = NULL;
+ unsigned int t;
+ unsigned long flags;
+ struct ddcb_queue *queue = req->queue;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ u64 queue_status;
+ __be32 icrc_hsi_shi = 0x0000;
+ __be32 old, new;
+
+ /* unsigned long flags; */
+ if (genwqe_ddcb_software_timeout <= 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: software timeout is not set!\n", __func__);
+ return -EFAULT;
+ }
+
+ pddcb = &queue->ddcb_vaddr[req->num];
+
+ for (t = 0; t < genwqe_ddcb_software_timeout * 10; t++) {
+
+ spin_lock_irqsave(&queue->ddcb_lock, flags);
+
+ /* Check if req was meanwhile finished */
+ if (ddcb_requ_get_state(req) == GENWQE_REQU_FINISHED)
+ goto go_home;
+
+ /* try to set PURGE bit if FETCHED/COMPLETED are not set */
+ old = pddcb->icrc_hsi_shi_32; /* read SHI/HSI in BE32 */
+ if ((old & DDCB_FETCHED_BE32) == 0x00000000) {
+
+ new = (old | DDCB_PURGE_BE32);
+ icrc_hsi_shi = cmpxchg(&pddcb->icrc_hsi_shi_32,
+ old, new);
+ if (icrc_hsi_shi == old)
+ goto finish_ddcb;
+ }
+
+ /* normal finish with HSI bit */
+ barrier();
+ icrc_hsi_shi = pddcb->icrc_hsi_shi_32;
+ if (icrc_hsi_shi & DDCB_COMPLETED_BE32)
+ goto finish_ddcb;
+
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+
+ /*
+ * Here the check_ddcb() function will most likely
+ * discover this DDCB to be finished some point in
+ * time. It will mark the req finished and free it up
+ * in the list.
+ */
+
+ copy_ddcb_results(req, req->num); /* for the failing case */
+ msleep(100); /* sleep for 1/10 second and try again */
+ continue;
+
+finish_ddcb:
+ copy_ddcb_results(req, req->num);
+ ddcb_requ_set_state(req, GENWQE_REQU_FINISHED);
+ queue->ddcbs_in_flight--;
+ queue->ddcb_req[req->num] = NULL; /* delete from array */
+ ddcb_mark_cleared(pddcb);
+
+ /* Move active DDCB further; Nothing to do here anymore. */
+
+ /*
+ * We need to ensure that there is at least one free
+ * DDCB in the queue. To do that, we must update
+ * ddcb_act only if the COMPLETED bit is set for the
+ * DDCB we are working on else we treat that DDCB even
+ * if we PURGED it as occupied (hardware is supposed
+ * to set the COMPLETED bit yet!).
+ */
+ icrc_hsi_shi = pddcb->icrc_hsi_shi_32;
+ if ((icrc_hsi_shi & DDCB_COMPLETED_BE32) &&
+ (queue->ddcb_act == req->num)) {
+ queue->ddcb_act = ((queue->ddcb_act + 1) %
+ queue->ddcb_max);
+ }
+go_home:
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ return 0;
+ }
+
+ /*
+ * If the card is dead and the queue is forced to stop, we
+ * might see this in the queue status register.
+ */
+ queue_status = __genwqe_readq(cd, queue->IO_QUEUE_STATUS);
+
+ dev_dbg(&pci_dev->dev, "UN/FINISHED DDCB#%d\n", req->num);
+ genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb));
+
+ dev_err(&pci_dev->dev,
+ "[%s] err: DDCB#%d not purged and not completed "
+ "after %d seconds QSTAT=%016llx!!\n",
+ __func__, req->num, genwqe_ddcb_software_timeout,
+ queue_status);
+
+ print_ddcb_info(cd, req->queue);
+
+ return -EFAULT;
+}
+
+int genwqe_init_debug_data(struct genwqe_dev *cd, struct genwqe_debug_data *d)
+{
+ int len;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (d == NULL) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: invalid memory for debug data!\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ len = sizeof(d->driver_version);
+ snprintf(d->driver_version, len, "%s", DRV_VERS_STRING);
+ d->slu_unitcfg = cd->slu_unitcfg;
+ d->app_unitcfg = cd->app_unitcfg;
+ return 0;
+}
+
+/**
+ * __genwqe_enqueue_ddcb() - Enqueue a DDCB
+ * @cd: pointer to genwqe device descriptor
+ * @req: pointer to DDCB execution request
+ *
+ * Return: 0 if enqueuing succeeded
+ * -EIO if card is unusable/PCIe problems
+ * -EBUSY if enqueuing failed
+ */
+int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req)
+{
+ struct ddcb *pddcb;
+ unsigned long flags;
+ struct ddcb_queue *queue;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ u16 icrc;
+
+ if (cd->card_state != GENWQE_CARD_USED) {
+ printk_ratelimited(KERN_ERR
+ "%s %s: [%s] Card is unusable/PCIe problem Req#%d\n",
+ GENWQE_DEVNAME, dev_name(&pci_dev->dev),
+ __func__, req->num);
+ return -EIO;
+ }
+
+ queue = req->queue = &cd->queue;
+
+ /* FIXME circumvention to improve performance when no irq is
+ * there.
+ */
+ if (genwqe_polling_enabled)
+ genwqe_check_ddcb_queue(cd, queue);
+
+ /*
+ * It must be ensured to process all DDCBs in successive
+ * order. Use a lock here in order to prevent nested DDCB
+ * enqueuing.
+ */
+ spin_lock_irqsave(&queue->ddcb_lock, flags);
+
+ pddcb = get_next_ddcb(cd, queue, &req->num); /* get ptr and num */
+ if (pddcb == NULL) {
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ queue->busy++;
+ return -EBUSY;
+ }
+
+ if (queue->ddcb_req[req->num] != NULL) {
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+
+ dev_err(&pci_dev->dev,
+ "[%s] picked DDCB %d with req=%p still in use!!\n",
+ __func__, req->num, req);
+ return -EFAULT;
+ }
+ ddcb_requ_set_state(req, GENWQE_REQU_ENQUEUED);
+ queue->ddcb_req[req->num] = req;
+
+ pddcb->cmdopts_16 = cpu_to_be16(req->cmd.cmdopts);
+ pddcb->cmd = req->cmd.cmd;
+ pddcb->acfunc = req->cmd.acfunc; /* functional unit */
+
+ /*
+ * We know that we can get retc 0x104 with CRC error, do not
+ * stop the queue in those cases for this command. XDIR = 1
+ * does not work for old SLU versions.
+ *
+ * Last bitstream with the old XDIR behavior had SLU_ID
+ * 0x34199.
+ */
+ if ((cd->slu_unitcfg & 0xFFFF0ull) > 0x34199ull)
+ pddcb->xdir = 0x1;
+ else
+ pddcb->xdir = 0x0;
+
+
+ pddcb->psp = (((req->cmd.asiv_length / 8) << 4) |
+ ((req->cmd.asv_length / 8)));
+ pddcb->disp_ts_64 = cpu_to_be64(req->cmd.disp_ts);
+
+ /*
+ * If copying the whole DDCB_ASIV_LENGTH is impacting
+ * performance we need to change it to
+ * req->cmd.asiv_length. But simulation benefits from some
+ * non-architectured bits behind the architectured content.
+ *
+ * How much data is copied depends on the availability of the
+ * ATS field, which was introduced late. If the ATS field is
+ * supported ASIV is 8 bytes shorter than it used to be. Since
+ * the ATS field is copied too, the code should do exactly
+ * what it did before, but I wanted to make copying of the ATS
+ * field very explicit.
+ */
+ if (genwqe_get_slu_id(cd) <= 0x2) {
+ memcpy(&pddcb->__asiv[0], /* destination */
+ &req->cmd.__asiv[0], /* source */
+ DDCB_ASIV_LENGTH); /* req->cmd.asiv_length */
+ } else {
+ pddcb->n.ats_64 = cpu_to_be64(req->cmd.ats);
+ memcpy(&pddcb->n.asiv[0], /* destination */
+ &req->cmd.asiv[0], /* source */
+ DDCB_ASIV_LENGTH_ATS); /* req->cmd.asiv_length */
+ }
+
+ pddcb->icrc_hsi_shi_32 = cpu_to_be32(0x00000000); /* for crc */
+
+ /*
+ * Calculate CRC_16 for corresponding range PSP(7:4). Include
+ * empty 4 bytes prior to the data.
+ */
+ icrc = genwqe_crc16((const u8 *)pddcb,
+ ICRC_LENGTH(req->cmd.asiv_length), 0xffff);
+ pddcb->icrc_hsi_shi_32 = cpu_to_be32((u32)icrc << 16);
+
+ /* enable DDCB completion irq */
+ if (!genwqe_polling_enabled)
+ pddcb->icrc_hsi_shi_32 |= DDCB_INTR_BE32;
+
+ dev_dbg(&pci_dev->dev, "INPUT DDCB#%d\n", req->num);
+ genwqe_hexdump(pci_dev, pddcb, sizeof(*pddcb));
+
+ if (ddcb_requ_collect_debug_data(req)) {
+ /* use the kernel copy of debug data. copying back to
+ user buffer happens later */
+
+ genwqe_init_debug_data(cd, &req->debug_data);
+ memcpy(&req->debug_data.ddcb_before, pddcb,
+ sizeof(req->debug_data.ddcb_before));
+ }
+
+ enqueue_ddcb(cd, queue, pddcb, req->num);
+ queue->ddcbs_in_flight++;
+
+ if (queue->ddcbs_in_flight > queue->ddcbs_max_in_flight)
+ queue->ddcbs_max_in_flight = queue->ddcbs_in_flight;
+
+ ddcb_requ_set_state(req, GENWQE_REQU_TAPPED);
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ wake_up_interruptible(&cd->queue_waitq);
+
+ return 0;
+}
+
+/**
+ * __genwqe_execute_raw_ddcb() - Setup and execute DDCB
+ * @cd: pointer to genwqe device descriptor
+ * @req: user provided DDCB request
+ */
+int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd,
+ struct genwqe_ddcb_cmd *cmd)
+{
+ int rc = 0;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd);
+
+ if (cmd->asiv_length > DDCB_ASIV_LENGTH) {
+ dev_err(&pci_dev->dev, "[%s] err: wrong asiv_length of %d\n",
+ __func__, cmd->asiv_length);
+ return -EINVAL;
+ }
+ if (cmd->asv_length > DDCB_ASV_LENGTH) {
+ dev_err(&pci_dev->dev, "[%s] err: wrong asv_length of %d\n",
+ __func__, cmd->asiv_length);
+ return -EINVAL;
+ }
+ rc = __genwqe_enqueue_ddcb(cd, req);
+ if (rc != 0)
+ return rc;
+
+ rc = __genwqe_wait_ddcb(cd, req);
+ if (rc < 0) /* error or signal interrupt */
+ goto err_exit;
+
+ if (ddcb_requ_collect_debug_data(req)) {
+ if (copy_to_user((struct genwqe_debug_data __user *)
+ (unsigned long)cmd->ddata_addr,
+ &req->debug_data,
+ sizeof(struct genwqe_debug_data)))
+ return -EFAULT;
+ }
+
+ /*
+ * Higher values than 0x102 indicate completion with faults,
+ * lower values than 0x102 indicate processing faults. Note
+ * that DDCB might have been purged. E.g. Cntl+C.
+ */
+ if (cmd->retc != DDCB_RETC_COMPLETE) {
+ /* This might happen e.g. flash read, and needs to be
+ handled by the upper layer code. */
+ rc = -EBADMSG; /* not processed/error retc */
+ }
+
+ return rc;
+
+ err_exit:
+ __genwqe_purge_ddcb(cd, req);
+
+ if (ddcb_requ_collect_debug_data(req)) {
+ if (copy_to_user((struct genwqe_debug_data __user *)
+ (unsigned long)cmd->ddata_addr,
+ &req->debug_data,
+ sizeof(struct genwqe_debug_data)))
+ return -EFAULT;
+ }
+ return rc;
+}
+
+/**
+ * genwqe_next_ddcb_ready() - Figure out if the next DDCB is already finished
+ *
+ * We use this as condition for our wait-queue code.
+ */
+static int genwqe_next_ddcb_ready(struct genwqe_dev *cd)
+{
+ unsigned long flags;
+ struct ddcb *pddcb;
+ struct ddcb_queue *queue = &cd->queue;
+
+ spin_lock_irqsave(&queue->ddcb_lock, flags);
+
+ if (queue_empty(queue)) { /* emtpy queue */
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ return 0;
+ }
+
+ pddcb = &queue->ddcb_vaddr[queue->ddcb_act];
+ if (pddcb->icrc_hsi_shi_32 & DDCB_COMPLETED_BE32) { /* ddcb ready */
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ return 1;
+ }
+
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+ return 0;
+}
+
+/**
+ * genwqe_ddcbs_in_flight() - Check how many DDCBs are in flight
+ *
+ * Keep track on the number of DDCBs which ware currently in the
+ * queue. This is needed for statistics as well as conditon if we want
+ * to wait or better do polling in case of no interrupts available.
+ */
+int genwqe_ddcbs_in_flight(struct genwqe_dev *cd)
+{
+ unsigned long flags;
+ int ddcbs_in_flight = 0;
+ struct ddcb_queue *queue = &cd->queue;
+
+ spin_lock_irqsave(&queue->ddcb_lock, flags);
+ ddcbs_in_flight += queue->ddcbs_in_flight;
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+
+ return ddcbs_in_flight;
+}
+
+static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue)
+{
+ int rc, i;
+ struct ddcb *pddcb;
+ u64 val64;
+ unsigned int queue_size;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (genwqe_ddcb_max < 2)
+ return -EINVAL;
+
+ queue_size = roundup(genwqe_ddcb_max * sizeof(struct ddcb), PAGE_SIZE);
+
+ queue->ddcbs_in_flight = 0; /* statistics */
+ queue->ddcbs_max_in_flight = 0;
+ queue->ddcbs_completed = 0;
+ queue->busy = 0;
+
+ queue->ddcb_seq = 0x100; /* start sequence number */
+ queue->ddcb_max = genwqe_ddcb_max; /* module parameter */
+ queue->ddcb_vaddr = __genwqe_alloc_consistent(cd, queue_size,
+ &queue->ddcb_daddr);
+ if (queue->ddcb_vaddr == NULL) {
+ dev_err(&pci_dev->dev,
+ "[%s] **err: could not allocate DDCB **\n", __func__);
+ return -ENOMEM;
+ }
+ memset(queue->ddcb_vaddr, 0, queue_size);
+
+ queue->ddcb_req = kzalloc(sizeof(struct ddcb_requ *) *
+ queue->ddcb_max, GFP_KERNEL);
+ if (!queue->ddcb_req) {
+ rc = -ENOMEM;
+ goto free_ddcbs;
+ }
+
+ queue->ddcb_waitqs = kzalloc(sizeof(wait_queue_head_t) *
+ queue->ddcb_max, GFP_KERNEL);
+ if (!queue->ddcb_waitqs) {
+ rc = -ENOMEM;
+ goto free_requs;
+ }
+
+ for (i = 0; i < queue->ddcb_max; i++) {
+ pddcb = &queue->ddcb_vaddr[i]; /* DDCBs */
+ pddcb->icrc_hsi_shi_32 = DDCB_COMPLETED_BE32;
+ pddcb->retc_16 = cpu_to_be16(0xfff);
+
+ queue->ddcb_req[i] = NULL; /* requests */
+ init_waitqueue_head(&queue->ddcb_waitqs[i]); /* waitqueues */
+ }
+
+ queue->ddcb_act = 0;
+ queue->ddcb_next = 0; /* queue is empty */
+
+ spin_lock_init(&queue->ddcb_lock);
+ init_waitqueue_head(&queue->ddcb_waitq);
+
+ val64 = ((u64)(queue->ddcb_max - 1) << 8); /* lastptr */
+ __genwqe_writeq(cd, queue->IO_QUEUE_CONFIG, 0x07); /* iCRC/vCRC */
+ __genwqe_writeq(cd, queue->IO_QUEUE_SEGMENT, queue->ddcb_daddr);
+ __genwqe_writeq(cd, queue->IO_QUEUE_INITSQN, queue->ddcb_seq);
+ __genwqe_writeq(cd, queue->IO_QUEUE_WRAP, val64);
+ return 0;
+
+ free_requs:
+ kfree(queue->ddcb_req);
+ queue->ddcb_req = NULL;
+ free_ddcbs:
+ __genwqe_free_consistent(cd, queue_size, queue->ddcb_vaddr,
+ queue->ddcb_daddr);
+ queue->ddcb_vaddr = NULL;
+ queue->ddcb_daddr = 0ull;
+ return -ENODEV;
+
+}
+
+static int ddcb_queue_initialized(struct ddcb_queue *queue)
+{
+ return queue->ddcb_vaddr != NULL;
+}
+
+static void free_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue)
+{
+ unsigned int queue_size;
+
+ queue_size = roundup(queue->ddcb_max * sizeof(struct ddcb), PAGE_SIZE);
+
+ kfree(queue->ddcb_req);
+ queue->ddcb_req = NULL;
+
+ if (queue->ddcb_vaddr) {
+ __genwqe_free_consistent(cd, queue_size, queue->ddcb_vaddr,
+ queue->ddcb_daddr);
+ queue->ddcb_vaddr = NULL;
+ queue->ddcb_daddr = 0ull;
+ }
+}
+
+static irqreturn_t genwqe_pf_isr(int irq, void *dev_id)
+{
+ u64 gfir;
+ struct genwqe_dev *cd = (struct genwqe_dev *)dev_id;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ /*
+ * In case of fatal FIR error the queue is stopped, such that
+ * we can safely check it without risking anything.
+ */
+ cd->irqs_processed++;
+ wake_up_interruptible(&cd->queue_waitq);
+
+ /*
+ * Checking for errors before kicking the queue might be
+ * safer, but slower for the good-case ... See above.
+ */
+ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ if ((gfir & GFIR_ERR_TRIGGER) != 0x0) {
+
+ wake_up_interruptible(&cd->health_waitq);
+
+ /*
+ * By default GFIRs causes recovery actions. This
+ * count is just for debug when recovery is masked.
+ */
+ printk_ratelimited(KERN_ERR
+ "%s %s: [%s] GFIR=%016llx\n",
+ GENWQE_DEVNAME, dev_name(&pci_dev->dev),
+ __func__, gfir);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t genwqe_vf_isr(int irq, void *dev_id)
+{
+ struct genwqe_dev *cd = (struct genwqe_dev *)dev_id;
+
+ cd->irqs_processed++;
+ wake_up_interruptible(&cd->queue_waitq);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * genwqe_card_thread() - Work thread for the DDCB queue
+ *
+ * The idea is to check if there are DDCBs in processing. If there are
+ * some finished DDCBs, we process them and wakeup the
+ * requestors. Otherwise we give other processes time using
+ * cond_resched().
+ */
+static int genwqe_card_thread(void *data)
+{
+ int should_stop = 0, rc = 0;
+ struct genwqe_dev *cd = (struct genwqe_dev *)data;
+
+ while (!kthread_should_stop()) {
+
+ genwqe_check_ddcb_queue(cd, &cd->queue);
+
+ if (genwqe_polling_enabled) {
+ rc = wait_event_interruptible_timeout(
+ cd->queue_waitq,
+ genwqe_ddcbs_in_flight(cd) ||
+ (should_stop = kthread_should_stop()), 1);
+ } else {
+ rc = wait_event_interruptible_timeout(
+ cd->queue_waitq,
+ genwqe_next_ddcb_ready(cd) ||
+ (should_stop = kthread_should_stop()), HZ);
+ }
+ if (should_stop)
+ break;
+
+ /*
+ * Avoid soft lockups on heavy loads; we do not want
+ * to disable our interrupts.
+ */
+ cond_resched();
+ }
+ return 0;
+}
+
+/**
+ * genwqe_setup_service_layer() - Setup DDCB queue
+ * @cd: pointer to genwqe device descriptor
+ *
+ * Allocate DDCBs. Configure Service Layer Controller (SLC).
+ *
+ * Return: 0 success
+ */
+int genwqe_setup_service_layer(struct genwqe_dev *cd)
+{
+ int rc;
+ struct ddcb_queue *queue;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (genwqe_is_privileged(cd)) {
+ rc = genwqe_card_reset(cd);
+ if (rc < 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: reset failed.\n", __func__);
+ return rc;
+ }
+ genwqe_read_softreset(cd);
+ }
+
+ queue = &cd->queue;
+ queue->IO_QUEUE_CONFIG = IO_SLC_QUEUE_CONFIG;
+ queue->IO_QUEUE_STATUS = IO_SLC_QUEUE_STATUS;
+ queue->IO_QUEUE_SEGMENT = IO_SLC_QUEUE_SEGMENT;
+ queue->IO_QUEUE_INITSQN = IO_SLC_QUEUE_INITSQN;
+ queue->IO_QUEUE_OFFSET = IO_SLC_QUEUE_OFFSET;
+ queue->IO_QUEUE_WRAP = IO_SLC_QUEUE_WRAP;
+ queue->IO_QUEUE_WTIME = IO_SLC_QUEUE_WTIME;
+ queue->IO_QUEUE_ERRCNTS = IO_SLC_QUEUE_ERRCNTS;
+ queue->IO_QUEUE_LRW = IO_SLC_QUEUE_LRW;
+
+ rc = setup_ddcb_queue(cd, queue);
+ if (rc != 0) {
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ init_waitqueue_head(&cd->queue_waitq);
+ cd->card_thread = kthread_run(genwqe_card_thread, cd,
+ GENWQE_DEVNAME "%d_thread",
+ cd->card_idx);
+ if (IS_ERR(cd->card_thread)) {
+ rc = PTR_ERR(cd->card_thread);
+ cd->card_thread = NULL;
+ goto stop_free_queue;
+ }
+
+ rc = genwqe_set_interrupt_capability(cd, GENWQE_MSI_IRQS);
+ if (rc > 0)
+ rc = genwqe_set_interrupt_capability(cd, rc);
+ if (rc != 0) {
+ rc = -ENODEV;
+ goto stop_kthread;
+ }
+
+ /*
+ * We must have all wait-queues initialized when we enable the
+ * interrupts. Otherwise we might crash if we get an early
+ * irq.
+ */
+ init_waitqueue_head(&cd->health_waitq);
+
+ if (genwqe_is_privileged(cd)) {
+ rc = request_irq(pci_dev->irq, genwqe_pf_isr, IRQF_SHARED,
+ GENWQE_DEVNAME, cd);
+ } else {
+ rc = request_irq(pci_dev->irq, genwqe_vf_isr, IRQF_SHARED,
+ GENWQE_DEVNAME, cd);
+ }
+ if (rc < 0) {
+ dev_err(&pci_dev->dev, "irq %d not free.\n", pci_dev->irq);
+ goto stop_irq_cap;
+ }
+
+ cd->card_state = GENWQE_CARD_USED;
+ return 0;
+
+ stop_irq_cap:
+ genwqe_reset_interrupt_capability(cd);
+ stop_kthread:
+ kthread_stop(cd->card_thread);
+ cd->card_thread = NULL;
+ stop_free_queue:
+ free_ddcb_queue(cd, queue);
+ err_out:
+ return rc;
+}
+
+/**
+ * queue_wake_up_all() - Handles fatal error case
+ *
+ * The PCI device got unusable and we have to stop all pending
+ * requests as fast as we can. The code after this must purge the
+ * DDCBs in question and ensure that all mappings are freed.
+ */
+static int queue_wake_up_all(struct genwqe_dev *cd)
+{
+ unsigned int i;
+ unsigned long flags;
+ struct ddcb_queue *queue = &cd->queue;
+
+ spin_lock_irqsave(&queue->ddcb_lock, flags);
+
+ for (i = 0; i < queue->ddcb_max; i++)
+ wake_up_interruptible(&queue->ddcb_waitqs[queue->ddcb_act]);
+
+ spin_unlock_irqrestore(&queue->ddcb_lock, flags);
+
+ return 0;
+}
+
+/**
+ * genwqe_finish_queue() - Remove any genwqe devices and user-interfaces
+ *
+ * Relies on the pre-condition that there are no users of the card
+ * device anymore e.g. with open file-descriptors.
+ *
+ * This function must be robust enough to be called twice.
+ */
+int genwqe_finish_queue(struct genwqe_dev *cd)
+{
+ int i, rc, in_flight;
+ int waitmax = genwqe_ddcb_software_timeout;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ struct ddcb_queue *queue = &cd->queue;
+
+ if (!ddcb_queue_initialized(queue))
+ return 0;
+
+ /* Do not wipe out the error state. */
+ if (cd->card_state == GENWQE_CARD_USED)
+ cd->card_state = GENWQE_CARD_UNUSED;
+
+ /* Wake up all requests in the DDCB queue such that they
+ should be removed nicely. */
+ queue_wake_up_all(cd);
+
+ /* We must wait to get rid of the DDCBs in flight */
+ for (i = 0; i < waitmax; i++) {
+ in_flight = genwqe_ddcbs_in_flight(cd);
+
+ if (in_flight == 0)
+ break;
+
+ dev_dbg(&pci_dev->dev,
+ " DEBUG [%d/%d] waiting for queue to get empty: "
+ "%d requests!\n", i, waitmax, in_flight);
+
+ /*
+ * Severe severe error situation: The card itself has
+ * 16 DDCB queues, each queue has e.g. 32 entries,
+ * each DDBC has a hardware timeout of currently 250
+ * msec but the PFs have a hardware timeout of 8 sec
+ * ... so I take something large.
+ */
+ msleep(1000);
+ }
+ if (i == waitmax) {
+ dev_err(&pci_dev->dev, " [%s] err: queue is not empty!!\n",
+ __func__);
+ rc = -EIO;
+ }
+ return rc;
+}
+
+/**
+ * genwqe_release_service_layer() - Shutdown DDCB queue
+ * @cd: genwqe device descriptor
+ *
+ * This function must be robust enough to be called twice.
+ */
+int genwqe_release_service_layer(struct genwqe_dev *cd)
+{
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (!ddcb_queue_initialized(&cd->queue))
+ return 1;
+
+ free_irq(pci_dev->irq, cd);
+ genwqe_reset_interrupt_capability(cd);
+
+ if (cd->card_thread != NULL) {
+ kthread_stop(cd->card_thread);
+ cd->card_thread = NULL;
+ }
+
+ free_ddcb_queue(cd, &cd->queue);
+ return 0;
+}
diff --git a/drivers/misc/genwqe/card_ddcb.h b/drivers/misc/genwqe/card_ddcb.h
new file mode 100644
index 0000000..c4f2672
--- /dev/null
+++ b/drivers/misc/genwqe/card_ddcb.h
@@ -0,0 +1,188 @@
+#ifndef __CARD_DDCB_H__
+#define __CARD_DDCB_H__
+
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include "genwqe_driver.h"
+#include "card_base.h"
+
+/**
+ * struct ddcb - Device Driver Control Block DDCB
+ * @hsi: Hardware software interlock
+ * @shi: Software hardware interlock. Hsi and shi are used to interlock
+ * software and hardware activities. We are using a compare and
+ * swap operation to ensure that there are no races when
+ * activating new DDCBs on the queue, or when we need to
+ * purge a DDCB from a running queue.
+ * @acfunc: Accelerator function addresses a unit within the chip
+ * @cmd: Command to work on
+ * @cmdopts_16: Options for the command
+ * @asiv: Input data
+ * @asv: Output data
+ *
+ * The DDCB data format is big endian. Multiple consequtive DDBCs form
+ * a DDCB queue.
+ */
+#define ASIV_LENGTH 104 /* Old specification without ATS field */
+#define ASIV_LENGTH_ATS 96 /* New specification with ATS field */
+#define ASV_LENGTH 64
+
+struct ddcb {
+ union {
+ __be32 icrc_hsi_shi_32; /* iCRC, Hardware/SW interlock */
+ struct {
+ __be16 icrc_16;
+ u8 hsi;
+ u8 shi;
+ };
+ };
+ u8 pre; /* Preamble */
+ u8 xdir; /* Execution Directives */
+ __be16 seqnum_16; /* Sequence Number */
+
+ u8 acfunc; /* Accelerator Function.. */
+ u8 cmd; /* Command. */
+ __be16 cmdopts_16; /* Command Options */
+ u8 sur; /* Status Update Rate */
+ u8 psp; /* Protection Section Pointer */
+ __be16 rsvd_0e_16; /* Reserved invariant */
+
+ __be64 fwiv_64; /* Firmware Invariant. */
+
+ union {
+ struct {
+ __be64 ats_64; /* Address Translation Spec */
+ u8 asiv[ASIV_LENGTH_ATS]; /* New ASIV */
+ } n;
+ u8 __asiv[ASIV_LENGTH]; /* obsolete */
+ };
+ u8 asv[ASV_LENGTH]; /* Appl Spec Variant */
+
+ __be16 rsvd_c0_16; /* Reserved Variant */
+ __be16 vcrc_16; /* Variant CRC */
+ __be32 rsvd_32; /* Reserved unprotected */
+
+ __be64 deque_ts_64; /* Deque Time Stamp. */
+
+ __be16 retc_16; /* Return Code */
+ __be16 attn_16; /* Attention/Extended Error Codes */
+ __be32 progress_32; /* Progress indicator. */
+
+ __be64 cmplt_ts_64; /* Completion Time Stamp. */
+
+ /* The following layout matches the new service layer format */
+ __be32 ibdc_32; /* Inbound Data Count (* 256) */
+ __be32 obdc_32; /* Outbound Data Count (* 256) */
+
+ __be64 rsvd_SLH_64; /* Reserved for hardware */
+ union { /* private data for driver */
+ u8 priv[8];
+ __be64 priv_64;
+ };
+ __be64 disp_ts_64; /* Dispatch TimeStamp */
+} __attribute__((__packed__));
+
+/* CRC polynomials for DDCB */
+#define CRC16_POLYNOMIAL 0x1021
+
+/*
+ * SHI: Software to Hardware Interlock
+ * This 1 byte field is written by software to interlock the
+ * movement of one queue entry to another with the hardware in the
+ * chip.
+ */
+#define DDCB_SHI_INTR 0x04 /* Bit 2 */
+#define DDCB_SHI_PURGE 0x02 /* Bit 1 */
+#define DDCB_SHI_NEXT 0x01 /* Bit 0 */
+
+/*
+ * HSI: Hardware to Software interlock
+ * This 1 byte field is written by hardware to interlock the movement
+ * of one queue entry to another with the software in the chip.
+ */
+#define DDCB_HSI_COMPLETED 0x40 /* Bit 6 */
+#define DDCB_HSI_FETCHED 0x04 /* Bit 2 */
+
+/*
+ * Accessing HSI/SHI is done 32-bit wide
+ * Normally 16-bit access would work too, but on some platforms the
+ * 16 compare and swap operation is not supported. Therefore
+ * switching to 32-bit such that those platforms will work too.
+ *
+ * iCRC HSI/SHI
+ */
+#define DDCB_INTR_BE32 cpu_to_be32(0x00000004)
+#define DDCB_PURGE_BE32 cpu_to_be32(0x00000002)
+#define DDCB_NEXT_BE32 cpu_to_be32(0x00000001)
+#define DDCB_COMPLETED_BE32 cpu_to_be32(0x00004000)
+#define DDCB_FETCHED_BE32 cpu_to_be32(0x00000400)
+
+/* Definitions of DDCB presets */
+#define DDCB_PRESET_PRE 0x80
+#define ICRC_LENGTH(n) ((n) + 8 + 8 + 8) /* used ASIV + hdr fields */
+#define VCRC_LENGTH(n) ((n)) /* used ASV */
+
+/*
+ * Genwqe Scatter Gather list
+ * Each element has up to 8 entries.
+ * The chaining element is element 0 cause of prefetching needs.
+ */
+
+/*
+ * 0b0110 Chained descriptor. The descriptor is describing the next
+ * descriptor list.
+ */
+#define SG_CHAINED (0x6)
+
+/*
+ * 0b0010 First entry of a descriptor list. Start from a Buffer-Empty
+ * condition.
+ */
+#define SG_DATA (0x2)
+
+/*
+ * 0b0000 Early terminator. This is the last entry on the list
+ * irregardless of the length indicated.
+ */
+#define SG_END_LIST (0x0)
+
+/**
+ * struct sglist - Scatter gather list
+ * @target_addr: Either a dma addr of memory to work on or a
+ * dma addr or a subsequent sglist block.
+ * @len: Length of the data block.
+ * @flags: See above.
+ *
+ * Depending on the command the GenWQE card can use a scatter gather
+ * list to describe the memory it works on. Always 8 sg_entry's form
+ * a block.
+ */
+struct sg_entry {
+ __be64 target_addr;
+ __be32 len;
+ __be32 flags;
+};
+
+#endif /* __CARD_DDCB_H__ */
diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c
new file mode 100644
index 0000000..3bfdc07
--- /dev/null
+++ b/drivers/misc/genwqe/card_debugfs.c
@@ -0,0 +1,500 @@
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Debugfs interfaces for the GenWQE card. Help to debug potential
+ * problems. Dump internal chip state for debugging and failure
+ * determination.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include "card_base.h"
+#include "card_ddcb.h"
+
+#define GENWQE_DEBUGFS_RO(_name, _showfn) \
+ static int genwqe_debugfs_##_name##_open(struct inode *inode, \
+ struct file *file) \
+ { \
+ return single_open(file, _showfn, inode->i_private); \
+ } \
+ static const struct file_operations genwqe_##_name##_fops = { \
+ .open = genwqe_debugfs_##_name##_open, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ }
+
+static void dbg_uidn_show(struct seq_file *s, struct genwqe_reg *regs,
+ int entries)
+{
+ unsigned int i;
+ u32 v_hi, v_lo;
+
+ for (i = 0; i < entries; i++) {
+ v_hi = (regs[i].val >> 32) & 0xffffffff;
+ v_lo = (regs[i].val) & 0xffffffff;
+
+ seq_printf(s, " 0x%08x 0x%08x 0x%08x 0x%08x EXT_ERR_REC\n",
+ regs[i].addr, regs[i].idx, v_hi, v_lo);
+ }
+}
+
+static int curr_dbg_uidn_show(struct seq_file *s, void *unused, int uid)
+{
+ struct genwqe_dev *cd = s->private;
+ int entries;
+ struct genwqe_reg *regs;
+
+ entries = genwqe_ffdc_buff_size(cd, uid);
+ if (entries < 0)
+ return -EINVAL;
+
+ if (entries == 0)
+ return 0;
+
+ regs = kcalloc(entries, sizeof(*regs), GFP_KERNEL);
+ if (regs == NULL)
+ return -ENOMEM;
+
+ genwqe_stop_traps(cd); /* halt the traps while dumping data */
+ genwqe_ffdc_buff_read(cd, uid, regs, entries);
+ genwqe_start_traps(cd);
+
+ dbg_uidn_show(s, regs, entries);
+ kfree(regs);
+ return 0;
+}
+
+static int genwqe_curr_dbg_uid0_show(struct seq_file *s, void *unused)
+{
+ return curr_dbg_uidn_show(s, unused, 0);
+}
+
+GENWQE_DEBUGFS_RO(curr_dbg_uid0, genwqe_curr_dbg_uid0_show);
+
+static int genwqe_curr_dbg_uid1_show(struct seq_file *s, void *unused)
+{
+ return curr_dbg_uidn_show(s, unused, 1);
+}
+
+GENWQE_DEBUGFS_RO(curr_dbg_uid1, genwqe_curr_dbg_uid1_show);
+
+static int genwqe_curr_dbg_uid2_show(struct seq_file *s, void *unused)
+{
+ return curr_dbg_uidn_show(s, unused, 2);
+}
+
+GENWQE_DEBUGFS_RO(curr_dbg_uid2, genwqe_curr_dbg_uid2_show);
+
+static int prev_dbg_uidn_show(struct seq_file *s, void *unused, int uid)
+{
+ struct genwqe_dev *cd = s->private;
+
+ dbg_uidn_show(s, cd->ffdc[uid].regs, cd->ffdc[uid].entries);
+ return 0;
+}
+
+static int genwqe_prev_dbg_uid0_show(struct seq_file *s, void *unused)
+{
+ return prev_dbg_uidn_show(s, unused, 0);
+}
+
+GENWQE_DEBUGFS_RO(prev_dbg_uid0, genwqe_prev_dbg_uid0_show);
+
+static int genwqe_prev_dbg_uid1_show(struct seq_file *s, void *unused)
+{
+ return prev_dbg_uidn_show(s, unused, 1);
+}
+
+GENWQE_DEBUGFS_RO(prev_dbg_uid1, genwqe_prev_dbg_uid1_show);
+
+static int genwqe_prev_dbg_uid2_show(struct seq_file *s, void *unused)
+{
+ return prev_dbg_uidn_show(s, unused, 2);
+}
+
+GENWQE_DEBUGFS_RO(prev_dbg_uid2, genwqe_prev_dbg_uid2_show);
+
+static int genwqe_curr_regs_show(struct seq_file *s, void *unused)
+{
+ struct genwqe_dev *cd = s->private;
+ unsigned int i;
+ struct genwqe_reg *regs;
+
+ regs = kcalloc(GENWQE_FFDC_REGS, sizeof(*regs), GFP_KERNEL);
+ if (regs == NULL)
+ return -ENOMEM;
+
+ genwqe_stop_traps(cd);
+ genwqe_read_ffdc_regs(cd, regs, GENWQE_FFDC_REGS, 1);
+ genwqe_start_traps(cd);
+
+ for (i = 0; i < GENWQE_FFDC_REGS; i++) {
+ if (regs[i].addr == 0xffffffff)
+ break; /* invalid entries */
+
+ if (regs[i].val == 0x0ull)
+ continue; /* do not print 0x0 FIRs */
+
+ seq_printf(s, " 0x%08x 0x%016llx\n",
+ regs[i].addr, regs[i].val);
+ }
+ return 0;
+}
+
+GENWQE_DEBUGFS_RO(curr_regs, genwqe_curr_regs_show);
+
+static int genwqe_prev_regs_show(struct seq_file *s, void *unused)
+{
+ struct genwqe_dev *cd = s->private;
+ unsigned int i;
+ struct genwqe_reg *regs = cd->ffdc[GENWQE_DBG_REGS].regs;
+
+ if (regs == NULL)
+ return -EINVAL;
+
+ for (i = 0; i < GENWQE_FFDC_REGS; i++) {
+ if (regs[i].addr == 0xffffffff)
+ break; /* invalid entries */
+
+ if (regs[i].val == 0x0ull)
+ continue; /* do not print 0x0 FIRs */
+
+ seq_printf(s, " 0x%08x 0x%016llx\n",
+ regs[i].addr, regs[i].val);
+ }
+ return 0;
+}
+
+GENWQE_DEBUGFS_RO(prev_regs, genwqe_prev_regs_show);
+
+static int genwqe_jtimer_show(struct seq_file *s, void *unused)
+{
+ struct genwqe_dev *cd = s->private;
+ unsigned int vf_num;
+ u64 jtimer;
+
+ jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, 0);
+ seq_printf(s, " PF 0x%016llx %d msec\n", jtimer,
+ genwqe_pf_jobtimeout_msec);
+
+ for (vf_num = 0; vf_num < cd->num_vfs; vf_num++) {
+ jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT,
+ vf_num + 1);
+ seq_printf(s, " VF%-2d 0x%016llx %d msec\n", vf_num, jtimer,
+ cd->vf_jobtimeout_msec[vf_num]);
+ }
+ return 0;
+}
+
+GENWQE_DEBUGFS_RO(jtimer, genwqe_jtimer_show);
+
+static int genwqe_queue_working_time_show(struct seq_file *s, void *unused)
+{
+ struct genwqe_dev *cd = s->private;
+ unsigned int vf_num;
+ u64 t;
+
+ t = genwqe_read_vreg(cd, IO_SLC_VF_QUEUE_WTIME, 0);
+ seq_printf(s, " PF 0x%016llx\n", t);
+
+ for (vf_num = 0; vf_num < cd->num_vfs; vf_num++) {
+ t = genwqe_read_vreg(cd, IO_SLC_VF_QUEUE_WTIME, vf_num + 1);
+ seq_printf(s, " VF%-2d 0x%016llx\n", vf_num, t);
+ }
+ return 0;
+}
+
+GENWQE_DEBUGFS_RO(queue_working_time, genwqe_queue_working_time_show);
+
+static int genwqe_ddcb_info_show(struct seq_file *s, void *unused)
+{
+ struct genwqe_dev *cd = s->private;
+ unsigned int i;
+ struct ddcb_queue *queue;
+ struct ddcb *pddcb;
+
+ queue = &cd->queue;
+ seq_puts(s, "DDCB QUEUE:\n");
+ seq_printf(s, " ddcb_max: %d\n"
+ " ddcb_daddr: %016llx - %016llx\n"
+ " ddcb_vaddr: %016llx\n"
+ " ddcbs_in_flight: %u\n"
+ " ddcbs_max_in_flight: %u\n"
+ " ddcbs_completed: %u\n"
+ " busy: %u\n"
+ " irqs_processed: %u\n",
+ queue->ddcb_max, (long long)queue->ddcb_daddr,
+ (long long)queue->ddcb_daddr +
+ (queue->ddcb_max * DDCB_LENGTH),
+ (long long)queue->ddcb_vaddr, queue->ddcbs_in_flight,
+ queue->ddcbs_max_in_flight, queue->ddcbs_completed,
+ queue->busy, cd->irqs_processed);
+
+ /* Hardware State */
+ seq_printf(s, " 0x%08x 0x%016llx IO_QUEUE_CONFIG\n"
+ " 0x%08x 0x%016llx IO_QUEUE_STATUS\n"
+ " 0x%08x 0x%016llx IO_QUEUE_SEGMENT\n"
+ " 0x%08x 0x%016llx IO_QUEUE_INITSQN\n"
+ " 0x%08x 0x%016llx IO_QUEUE_WRAP\n"
+ " 0x%08x 0x%016llx IO_QUEUE_OFFSET\n"
+ " 0x%08x 0x%016llx IO_QUEUE_WTIME\n"
+ " 0x%08x 0x%016llx IO_QUEUE_ERRCNTS\n"
+ " 0x%08x 0x%016llx IO_QUEUE_LRW\n",
+ queue->IO_QUEUE_CONFIG,
+ __genwqe_readq(cd, queue->IO_QUEUE_CONFIG),
+ queue->IO_QUEUE_STATUS,
+ __genwqe_readq(cd, queue->IO_QUEUE_STATUS),
+ queue->IO_QUEUE_SEGMENT,
+ __genwqe_readq(cd, queue->IO_QUEUE_SEGMENT),
+ queue->IO_QUEUE_INITSQN,
+ __genwqe_readq(cd, queue->IO_QUEUE_INITSQN),
+ queue->IO_QUEUE_WRAP,
+ __genwqe_readq(cd, queue->IO_QUEUE_WRAP),
+ queue->IO_QUEUE_OFFSET,
+ __genwqe_readq(cd, queue->IO_QUEUE_OFFSET),
+ queue->IO_QUEUE_WTIME,
+ __genwqe_readq(cd, queue->IO_QUEUE_WTIME),
+ queue->IO_QUEUE_ERRCNTS,
+ __genwqe_readq(cd, queue->IO_QUEUE_ERRCNTS),
+ queue->IO_QUEUE_LRW,
+ __genwqe_readq(cd, queue->IO_QUEUE_LRW));
+
+ seq_printf(s, "DDCB list (ddcb_act=%d/ddcb_next=%d):\n",
+ queue->ddcb_act, queue->ddcb_next);
+
+ pddcb = queue->ddcb_vaddr;
+ for (i = 0; i < queue->ddcb_max; i++) {
+ seq_printf(s, " %-3d: RETC=%03x SEQ=%04x HSI/SHI=%02x/%02x ",
+ i, be16_to_cpu(pddcb->retc_16),
+ be16_to_cpu(pddcb->seqnum_16),
+ pddcb->hsi, pddcb->shi);
+ seq_printf(s, "PRIV=%06llx CMD=%02x\n",
+ be64_to_cpu(pddcb->priv_64), pddcb->cmd);
+ pddcb++;
+ }
+ return 0;
+}
+
+GENWQE_DEBUGFS_RO(ddcb_info, genwqe_ddcb_info_show);
+
+static int genwqe_info_show(struct seq_file *s, void *unused)
+{
+ struct genwqe_dev *cd = s->private;
+ u16 val16, type;
+ u64 app_id, slu_id, bitstream = -1;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ slu_id = __genwqe_readq(cd, IO_SLU_UNITCFG);
+ app_id = __genwqe_readq(cd, IO_APP_UNITCFG);
+
+ if (genwqe_is_privileged(cd))
+ bitstream = __genwqe_readq(cd, IO_SLU_BITSTREAM);
+
+ val16 = (u16)(slu_id & 0x0fLLU);
+ type = (u16)((slu_id >> 20) & 0xffLLU);
+
+ seq_printf(s, "%s driver version: %s\n"
+ " Device Name/Type: %s %s CardIdx: %d\n"
+ " SLU/APP Config : 0x%016llx/0x%016llx\n"
+ " Build Date : %u/%x/%u\n"
+ " Base Clock : %u MHz\n"
+ " Arch/SVN Release: %u/%llx\n"
+ " Bitstream : %llx\n",
+ GENWQE_DEVNAME, DRV_VERS_STRING, dev_name(&pci_dev->dev),
+ genwqe_is_privileged(cd) ?
+ "Physical" : "Virtual or no SR-IOV",
+ cd->card_idx, slu_id, app_id,
+ (u16)((slu_id >> 12) & 0x0fLLU), /* month */
+ (u16)((slu_id >> 4) & 0xffLLU), /* day */
+ (u16)((slu_id >> 16) & 0x0fLLU) + 2010, /* year */
+ genwqe_base_clock_frequency(cd),
+ (u16)((slu_id >> 32) & 0xffLLU), slu_id >> 40,
+ bitstream);
+
+ return 0;
+}
+
+GENWQE_DEBUGFS_RO(info, genwqe_info_show);
+
+int genwqe_init_debugfs(struct genwqe_dev *cd)
+{
+ struct dentry *root;
+ struct dentry *file;
+ int ret;
+ char card_name[64];
+ char name[64];
+ unsigned int i;
+
+ sprintf(card_name, "%s%u_card", GENWQE_DEVNAME, cd->card_idx);
+
+ root = debugfs_create_dir(card_name, cd->debugfs_genwqe);
+ if (!root) {
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ /* non privileged interfaces are done here */
+ file = debugfs_create_file("ddcb_info", S_IRUGO, root, cd,
+ &genwqe_ddcb_info_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("info", S_IRUGO, root, cd,
+ &genwqe_info_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_x64("err_inject", 0666, root, &cd->err_inject);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_u32("ddcb_software_timeout", 0666, root,
+ &cd->ddcb_software_timeout);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_u32("kill_timeout", 0666, root,
+ &cd->kill_timeout);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ /* privileged interfaces follow here */
+ if (!genwqe_is_privileged(cd)) {
+ cd->debugfs_root = root;
+ return 0;
+ }
+
+ file = debugfs_create_file("curr_regs", S_IRUGO, root, cd,
+ &genwqe_curr_regs_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("curr_dbg_uid0", S_IRUGO, root, cd,
+ &genwqe_curr_dbg_uid0_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("curr_dbg_uid1", S_IRUGO, root, cd,
+ &genwqe_curr_dbg_uid1_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("curr_dbg_uid2", S_IRUGO, root, cd,
+ &genwqe_curr_dbg_uid2_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("prev_regs", S_IRUGO, root, cd,
+ &genwqe_prev_regs_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("prev_dbg_uid0", S_IRUGO, root, cd,
+ &genwqe_prev_dbg_uid0_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("prev_dbg_uid1", S_IRUGO, root, cd,
+ &genwqe_prev_dbg_uid1_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("prev_dbg_uid2", S_IRUGO, root, cd,
+ &genwqe_prev_dbg_uid2_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ for (i = 0; i < GENWQE_MAX_VFS; i++) {
+ sprintf(name, "vf%d_jobtimeout_msec", i);
+
+ file = debugfs_create_u32(name, 0666, root,
+ &cd->vf_jobtimeout_msec[i]);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+ }
+
+ file = debugfs_create_file("jobtimer", S_IRUGO, root, cd,
+ &genwqe_jtimer_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_file("queue_working_time", S_IRUGO, root, cd,
+ &genwqe_queue_working_time_fops);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ file = debugfs_create_u32("skip_recovery", 0666, root,
+ &cd->skip_recovery);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ cd->debugfs_root = root;
+ return 0;
+err1:
+ debugfs_remove_recursive(root);
+err0:
+ return ret;
+}
+
+void genqwe_exit_debugfs(struct genwqe_dev *cd)
+{
+ debugfs_remove_recursive(cd->debugfs_root);
+}
diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c
new file mode 100644
index 0000000..8f8a6b3
--- /dev/null
+++ b/drivers/misc/genwqe/card_dev.c
@@ -0,0 +1,1414 @@
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Character device representation of the GenWQE device. This allows
+ * user-space applications to communicate with the card.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+
+#include "card_base.h"
+#include "card_ddcb.h"
+
+static int genwqe_open_files(struct genwqe_dev *cd)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cd->file_lock, flags);
+ rc = list_empty(&cd->file_list);
+ spin_unlock_irqrestore(&cd->file_lock, flags);
+ return !rc;
+}
+
+static void genwqe_add_file(struct genwqe_dev *cd, struct genwqe_file *cfile)
+{
+ unsigned long flags;
+
+ cfile->owner = current;
+ spin_lock_irqsave(&cd->file_lock, flags);
+ list_add(&cfile->list, &cd->file_list);
+ spin_unlock_irqrestore(&cd->file_lock, flags);
+}
+
+static int genwqe_del_file(struct genwqe_dev *cd, struct genwqe_file *cfile)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cd->file_lock, flags);
+ list_del(&cfile->list);
+ spin_unlock_irqrestore(&cd->file_lock, flags);
+
+ return 0;
+}
+
+static void genwqe_add_pin(struct genwqe_file *cfile, struct dma_mapping *m)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cfile->pin_lock, flags);
+ list_add(&m->pin_list, &cfile->pin_list);
+ spin_unlock_irqrestore(&cfile->pin_lock, flags);
+}
+
+static int genwqe_del_pin(struct genwqe_file *cfile, struct dma_mapping *m)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cfile->pin_lock, flags);
+ list_del(&m->pin_list);
+ spin_unlock_irqrestore(&cfile->pin_lock, flags);
+
+ return 0;
+}
+
+/**
+ * genwqe_search_pin() - Search for the mapping for a userspace address
+ * @cfile: Descriptor of opened file
+ * @u_addr: User virtual address
+ * @size: Size of buffer
+ * @dma_addr: DMA address to be updated
+ *
+ * Return: Pointer to the corresponding mapping NULL if not found
+ */
+static struct dma_mapping *genwqe_search_pin(struct genwqe_file *cfile,
+ unsigned long u_addr,
+ unsigned int size,
+ void **virt_addr)
+{
+ unsigned long flags;
+ struct dma_mapping *m;
+
+ spin_lock_irqsave(&cfile->pin_lock, flags);
+
+ list_for_each_entry(m, &cfile->pin_list, pin_list) {
+ if ((((u64)m->u_vaddr) <= (u_addr)) &&
+ (((u64)m->u_vaddr + m->size) >= (u_addr + size))) {
+
+ if (virt_addr)
+ *virt_addr = m->k_vaddr +
+ (u_addr - (u64)m->u_vaddr);
+
+ spin_unlock_irqrestore(&cfile->pin_lock, flags);
+ return m;
+ }
+ }
+ spin_unlock_irqrestore(&cfile->pin_lock, flags);
+ return NULL;
+}
+
+static void __genwqe_add_mapping(struct genwqe_file *cfile,
+ struct dma_mapping *dma_map)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cfile->map_lock, flags);
+ list_add(&dma_map->card_list, &cfile->map_list);
+ spin_unlock_irqrestore(&cfile->map_lock, flags);
+}
+
+static void __genwqe_del_mapping(struct genwqe_file *cfile,
+ struct dma_mapping *dma_map)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cfile->map_lock, flags);
+ list_del(&dma_map->card_list);
+ spin_unlock_irqrestore(&cfile->map_lock, flags);
+}
+
+
+/**
+ * __genwqe_search_mapping() - Search for the mapping for a userspace address
+ * @cfile: descriptor of opened file
+ * @u_addr: user virtual address
+ * @size: size of buffer
+ * @dma_addr: DMA address to be updated
+ * Return: Pointer to the corresponding mapping NULL if not found
+ */
+static struct dma_mapping *__genwqe_search_mapping(struct genwqe_file *cfile,
+ unsigned long u_addr,
+ unsigned int size,
+ dma_addr_t *dma_addr,
+ void **virt_addr)
+{
+ unsigned long flags;
+ struct dma_mapping *m;
+ struct pci_dev *pci_dev = cfile->cd->pci_dev;
+
+ spin_lock_irqsave(&cfile->map_lock, flags);
+ list_for_each_entry(m, &cfile->map_list, card_list) {
+
+ if ((((u64)m->u_vaddr) <= (u_addr)) &&
+ (((u64)m->u_vaddr + m->size) >= (u_addr + size))) {
+
+ /* match found: current is as expected and
+ addr is in range */
+ if (dma_addr)
+ *dma_addr = m->dma_addr +
+ (u_addr - (u64)m->u_vaddr);
+
+ if (virt_addr)
+ *virt_addr = m->k_vaddr +
+ (u_addr - (u64)m->u_vaddr);
+
+ spin_unlock_irqrestore(&cfile->map_lock, flags);
+ return m;
+ }
+ }
+ spin_unlock_irqrestore(&cfile->map_lock, flags);
+
+ dev_err(&pci_dev->dev,
+ "[%s] Entry not found: u_addr=%lx, size=%x\n",
+ __func__, u_addr, size);
+
+ return NULL;
+}
+
+static void genwqe_remove_mappings(struct genwqe_file *cfile)
+{
+ int i = 0;
+ struct list_head *node, *next;
+ struct dma_mapping *dma_map;
+ struct genwqe_dev *cd = cfile->cd;
+ struct pci_dev *pci_dev = cfile->cd->pci_dev;
+
+ list_for_each_safe(node, next, &cfile->map_list) {
+ dma_map = list_entry(node, struct dma_mapping, card_list);
+
+ list_del_init(&dma_map->card_list);
+
+ /*
+ * This is really a bug, because those things should
+ * have been already tidied up.
+ *
+ * GENWQE_MAPPING_RAW should have been removed via mmunmap().
+ * GENWQE_MAPPING_SGL_TEMP should be removed by tidy up code.
+ */
+ dev_err(&pci_dev->dev,
+ "[%s] %d. cleanup mapping: u_vaddr=%p "
+ "u_kaddr=%016lx dma_addr=%lx\n", __func__, i++,
+ dma_map->u_vaddr, (unsigned long)dma_map->k_vaddr,
+ (unsigned long)dma_map->dma_addr);
+
+ if (dma_map->type == GENWQE_MAPPING_RAW) {
+ /* we allocated this dynamically */
+ __genwqe_free_consistent(cd, dma_map->size,
+ dma_map->k_vaddr,
+ dma_map->dma_addr);
+ kfree(dma_map);
+ } else if (dma_map->type == GENWQE_MAPPING_SGL_TEMP) {
+ /* we use dma_map statically from the request */
+ genwqe_user_vunmap(cd, dma_map, NULL);
+ }
+ }
+}
+
+static void genwqe_remove_pinnings(struct genwqe_file *cfile)
+{
+ struct list_head *node, *next;
+ struct dma_mapping *dma_map;
+ struct genwqe_dev *cd = cfile->cd;
+
+ list_for_each_safe(node, next, &cfile->pin_list) {
+ dma_map = list_entry(node, struct dma_mapping, pin_list);
+
+ /*
+ * This is not a bug, because a killed processed might
+ * not call the unpin ioctl, which is supposed to free
+ * the resources.
+ *
+ * Pinnings are dymically allocated and need to be
+ * deleted.
+ */
+ list_del_init(&dma_map->pin_list);
+ genwqe_user_vunmap(cd, dma_map, NULL);
+ kfree(dma_map);
+ }
+}
+
+/**
+ * genwqe_kill_fasync() - Send signal to all processes with open GenWQE files
+ *
+ * E.g. genwqe_send_signal(cd, SIGIO);
+ */
+static int genwqe_kill_fasync(struct genwqe_dev *cd, int sig)
+{
+ unsigned int files = 0;
+ unsigned long flags;
+ struct genwqe_file *cfile;
+
+ spin_lock_irqsave(&cd->file_lock, flags);
+ list_for_each_entry(cfile, &cd->file_list, list) {
+ if (cfile->async_queue)
+ kill_fasync(&cfile->async_queue, sig, POLL_HUP);
+ files++;
+ }
+ spin_unlock_irqrestore(&cd->file_lock, flags);
+ return files;
+}
+
+static int genwqe_force_sig(struct genwqe_dev *cd, int sig)
+{
+ unsigned int files = 0;
+ unsigned long flags;
+ struct genwqe_file *cfile;
+
+ spin_lock_irqsave(&cd->file_lock, flags);
+ list_for_each_entry(cfile, &cd->file_list, list) {
+ force_sig(sig, cfile->owner);
+ files++;
+ }
+ spin_unlock_irqrestore(&cd->file_lock, flags);
+ return files;
+}
+
+/**
+ * genwqe_open() - file open
+ * @inode: file system information
+ * @filp: file handle
+ *
+ * This function is executed whenever an application calls
+ * open("/dev/genwqe",..).
+ *
+ * Return: 0 if successful or <0 if errors
+ */
+static int genwqe_open(struct inode *inode, struct file *filp)
+{
+ struct genwqe_dev *cd;
+ struct genwqe_file *cfile;
+ struct pci_dev *pci_dev;
+
+ cfile = kzalloc(sizeof(*cfile), GFP_KERNEL);
+ if (cfile == NULL)
+ return -ENOMEM;
+
+ cd = container_of(inode->i_cdev, struct genwqe_dev, cdev_genwqe);
+ pci_dev = cd->pci_dev;
+ cfile->cd = cd;
+ cfile->filp = filp;
+ cfile->client = NULL;
+
+ spin_lock_init(&cfile->map_lock); /* list of raw memory allocations */
+ INIT_LIST_HEAD(&cfile->map_list);
+
+ spin_lock_init(&cfile->pin_lock); /* list of user pinned memory */
+ INIT_LIST_HEAD(&cfile->pin_list);
+
+ filp->private_data = cfile;
+
+ genwqe_add_file(cd, cfile);
+ return 0;
+}
+
+/**
+ * genwqe_fasync() - Setup process to receive SIGIO.
+ * @fd: file descriptor
+ * @filp: file handle
+ * @mode: file mode
+ *
+ * Sending a signal is working as following:
+ *
+ * if (cdev->async_queue)
+ * kill_fasync(&cdev->async_queue, SIGIO, POLL_IN);
+ *
+ * Some devices also implement asynchronous notification to indicate
+ * when the device can be written; in this case, of course,
+ * kill_fasync must be called with a mode of POLL_OUT.
+ */
+static int genwqe_fasync(int fd, struct file *filp, int mode)
+{
+ struct genwqe_file *cdev = (struct genwqe_file *)filp->private_data;
+ return fasync_helper(fd, filp, mode, &cdev->async_queue);
+}
+
+
+/**
+ * genwqe_release() - file close
+ * @inode: file system information
+ * @filp: file handle
+ *
+ * This function is executed whenever an application calls 'close(fd_genwqe)'
+ *
+ * Return: always 0
+ */
+static int genwqe_release(struct inode *inode, struct file *filp)
+{
+ struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data;
+ struct genwqe_dev *cd = cfile->cd;
+
+ /* there must be no entries in these lists! */
+ genwqe_remove_mappings(cfile);
+ genwqe_remove_pinnings(cfile);
+
+ /* remove this filp from the asynchronously notified filp's */
+ genwqe_fasync(-1, filp, 0);
+
+ /*
+ * For this to work we must not release cd when this cfile is
+ * not yet released, otherwise the list entry is invalid,
+ * because the list itself gets reinstantiated!
+ */
+ genwqe_del_file(cd, cfile);
+ kfree(cfile);
+ return 0;
+}
+
+static void genwqe_vma_open(struct vm_area_struct *vma)
+{
+ /* nothing ... */
+}
+
+/**
+ * genwqe_vma_close() - Called each time when vma is unmapped
+ *
+ * Free memory which got allocated by GenWQE mmap().
+ */
+static void genwqe_vma_close(struct vm_area_struct *vma)
+{
+ unsigned long vsize = vma->vm_end - vma->vm_start;
+ struct inode *inode = vma->vm_file->f_dentry->d_inode;
+ struct dma_mapping *dma_map;
+ struct genwqe_dev *cd = container_of(inode->i_cdev, struct genwqe_dev,
+ cdev_genwqe);
+ struct pci_dev *pci_dev = cd->pci_dev;
+ dma_addr_t d_addr = 0;
+ struct genwqe_file *cfile = vma->vm_private_data;
+
+ dma_map = __genwqe_search_mapping(cfile, vma->vm_start, vsize,
+ &d_addr, NULL);
+ if (dma_map == NULL) {
+ dev_err(&pci_dev->dev,
+ " [%s] err: mapping not found: v=%lx, p=%lx s=%lx\n",
+ __func__, vma->vm_start, vma->vm_pgoff << PAGE_SHIFT,
+ vsize);
+ return;
+ }
+ __genwqe_del_mapping(cfile, dma_map);
+ __genwqe_free_consistent(cd, dma_map->size, dma_map->k_vaddr,
+ dma_map->dma_addr);
+ kfree(dma_map);
+}
+
+static struct vm_operations_struct genwqe_vma_ops = {
+ .open = genwqe_vma_open,
+ .close = genwqe_vma_close,
+};
+
+/**
+ * genwqe_mmap() - Provide contignous buffers to userspace
+ *
+ * We use mmap() to allocate contignous buffers used for DMA
+ * transfers. After the buffer is allocated we remap it to user-space
+ * and remember a reference to our dma_mapping data structure, where
+ * we store the associated DMA address and allocated size.
+ *
+ * When we receive a DDCB execution request with the ATS bits set to
+ * plain buffer, we lookup our dma_mapping list to find the
+ * corresponding DMA address for the associated user-space address.
+ */
+static int genwqe_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ int rc;
+ unsigned long pfn, vsize = vma->vm_end - vma->vm_start;
+ struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data;
+ struct genwqe_dev *cd = cfile->cd;
+ struct dma_mapping *dma_map;
+
+ if (vsize == 0)
+ return -EINVAL;
+
+ if (get_order(vsize) > MAX_ORDER)
+ return -ENOMEM;
+
+ dma_map = kzalloc(sizeof(struct dma_mapping), GFP_ATOMIC);
+ if (dma_map == NULL)
+ return -ENOMEM;
+
+ genwqe_mapping_init(dma_map, GENWQE_MAPPING_RAW);
+ dma_map->u_vaddr = (void *)vma->vm_start;
+ dma_map->size = vsize;
+ dma_map->nr_pages = DIV_ROUND_UP(vsize, PAGE_SIZE);
+ dma_map->k_vaddr = __genwqe_alloc_consistent(cd, vsize,
+ &dma_map->dma_addr);
+ if (dma_map->k_vaddr == NULL) {
+ rc = -ENOMEM;
+ goto free_dma_map;
+ }
+
+ if (capable(CAP_SYS_ADMIN) && (vsize > sizeof(dma_addr_t)))
+ *(dma_addr_t *)dma_map->k_vaddr = dma_map->dma_addr;
+
+ pfn = virt_to_phys(dma_map->k_vaddr) >> PAGE_SHIFT;
+ rc = remap_pfn_range(vma,
+ vma->vm_start,
+ pfn,
+ vsize,
+ vma->vm_page_prot);
+ if (rc != 0) {
+ rc = -EFAULT;
+ goto free_dma_mem;
+ }
+
+ vma->vm_private_data = cfile;
+ vma->vm_ops = &genwqe_vma_ops;
+ __genwqe_add_mapping(cfile, dma_map);
+
+ return 0;
+
+ free_dma_mem:
+ __genwqe_free_consistent(cd, dma_map->size,
+ dma_map->k_vaddr,
+ dma_map->dma_addr);
+ free_dma_map:
+ kfree(dma_map);
+ return rc;
+}
+
+/**
+ * do_flash_update() - Excute flash update (write image or CVPD)
+ * @cd: genwqe device
+ * @load: details about image load
+ *
+ * Return: 0 if successful
+ */
+
+#define FLASH_BLOCK 0x40000 /* we use 256k blocks */
+
+static int do_flash_update(struct genwqe_file *cfile,
+ struct genwqe_bitstream *load)
+{
+ int rc = 0;
+ int blocks_to_flash;
+ dma_addr_t dma_addr;
+ u64 flash = 0;
+ size_t tocopy = 0;
+ u8 __user *buf;
+ u8 *xbuf;
+ u32 crc;
+ u8 cmdopts;
+ struct genwqe_dev *cd = cfile->cd;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if ((load->size & 0x3) != 0)
+ return -EINVAL;
+
+ if (((unsigned long)(load->data_addr) & ~PAGE_MASK) != 0)
+ return -EINVAL;
+
+ /* FIXME Bits have changed for new service layer! */
+ switch ((char)load->partition) {
+ case '0':
+ cmdopts = 0x14;
+ break; /* download/erase_first/part_0 */
+ case '1':
+ cmdopts = 0x1C;
+ break; /* download/erase_first/part_1 */
+ case 'v': /* cmdopts = 0x0c (VPD) */
+ default:
+ return -EINVAL;
+ }
+
+ buf = (u8 __user *)load->data_addr;
+ xbuf = __genwqe_alloc_consistent(cd, FLASH_BLOCK, &dma_addr);
+ if (xbuf == NULL)
+ return -ENOMEM;
+
+ blocks_to_flash = load->size / FLASH_BLOCK;
+ while (load->size) {
+ struct genwqe_ddcb_cmd *req;
+
+ /*
+ * We must be 4 byte aligned. Buffer must be 0 appened
+ * to have defined values when calculating CRC.
+ */
+ tocopy = min_t(size_t, load->size, FLASH_BLOCK);
+
+ rc = copy_from_user(xbuf, buf, tocopy);
+ if (rc) {
+ rc = -EFAULT;
+ goto free_buffer;
+ }
+ crc = genwqe_crc32(xbuf, tocopy, 0xffffffff);
+
+ dev_dbg(&pci_dev->dev,
+ "[%s] DMA: %lx CRC: %08x SZ: %ld %d\n",
+ __func__, (unsigned long)dma_addr, crc, tocopy,
+ blocks_to_flash);
+
+ /* prepare DDCB for SLU process */
+ req = ddcb_requ_alloc();
+ if (req == NULL) {
+ rc = -ENOMEM;
+ goto free_buffer;
+ }
+
+ req->cmd = SLCMD_MOVE_FLASH;
+ req->cmdopts = cmdopts;
+
+ /* prepare invariant values */
+ if (genwqe_get_slu_id(cd) <= 0x2) {
+ *(__be64 *)&req->__asiv[0] = cpu_to_be64(dma_addr);
+ *(__be64 *)&req->__asiv[8] = cpu_to_be64(tocopy);
+ *(__be64 *)&req->__asiv[16] = cpu_to_be64(flash);
+ *(__be32 *)&req->__asiv[24] = cpu_to_be32(0);
+ req->__asiv[24] = load->uid;
+ *(__be32 *)&req->__asiv[28] = cpu_to_be32(crc);
+
+ /* for simulation only */
+ *(__be64 *)&req->__asiv[88] = cpu_to_be64(load->slu_id);
+ *(__be64 *)&req->__asiv[96] = cpu_to_be64(load->app_id);
+ req->asiv_length = 32; /* bytes included in crc calc */
+ } else { /* setup DDCB for ATS architecture */
+ *(__be64 *)&req->asiv[0] = cpu_to_be64(dma_addr);
+ *(__be32 *)&req->asiv[8] = cpu_to_be32(tocopy);
+ *(__be32 *)&req->asiv[12] = cpu_to_be32(0); /* resvd */
+ *(__be64 *)&req->asiv[16] = cpu_to_be64(flash);
+ *(__be32 *)&req->asiv[24] = cpu_to_be32(load->uid<<24);
+ *(__be32 *)&req->asiv[28] = cpu_to_be32(crc);
+
+ /* for simulation only */
+ *(__be64 *)&req->asiv[80] = cpu_to_be64(load->slu_id);
+ *(__be64 *)&req->asiv[88] = cpu_to_be64(load->app_id);
+
+ /* Rd only */
+ req->ats = 0x4ULL << 44;
+ req->asiv_length = 40; /* bytes included in crc calc */
+ }
+ req->asv_length = 8;
+
+ /* For Genwqe5 we get back the calculated CRC */
+ *(u64 *)&req->asv[0] = 0ULL; /* 0x80 */
+
+ rc = __genwqe_execute_raw_ddcb(cd, req);
+
+ load->retc = req->retc;
+ load->attn = req->attn;
+ load->progress = req->progress;
+
+ if (rc < 0) {
+ ddcb_requ_free(req);
+ goto free_buffer;
+ }
+
+ if (req->retc != DDCB_RETC_COMPLETE) {
+ rc = -EIO;
+ ddcb_requ_free(req);
+ goto free_buffer;
+ }
+
+ load->size -= tocopy;
+ flash += tocopy;
+ buf += tocopy;
+ blocks_to_flash--;
+ ddcb_requ_free(req);
+ }
+
+ free_buffer:
+ __genwqe_free_consistent(cd, FLASH_BLOCK, xbuf, dma_addr);
+ return rc;
+}
+
+static int do_flash_read(struct genwqe_file *cfile,
+ struct genwqe_bitstream *load)
+{
+ int rc, blocks_to_flash;
+ dma_addr_t dma_addr;
+ u64 flash = 0;
+ size_t tocopy = 0;
+ u8 __user *buf;
+ u8 *xbuf;
+ u8 cmdopts;
+ struct genwqe_dev *cd = cfile->cd;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ struct genwqe_ddcb_cmd *cmd;
+
+ if ((load->size & 0x3) != 0)
+ return -EINVAL;
+
+ if (((unsigned long)(load->data_addr) & ~PAGE_MASK) != 0)
+ return -EINVAL;
+
+ /* FIXME Bits have changed for new service layer! */
+ switch ((char)load->partition) {
+ case '0':
+ cmdopts = 0x12;
+ break; /* upload/part_0 */
+ case '1':
+ cmdopts = 0x1A;
+ break; /* upload/part_1 */
+ case 'v':
+ default:
+ return -EINVAL;
+ }
+
+ buf = (u8 __user *)load->data_addr;
+ xbuf = __genwqe_alloc_consistent(cd, FLASH_BLOCK, &dma_addr);
+ if (xbuf == NULL)
+ return -ENOMEM;
+
+ blocks_to_flash = load->size / FLASH_BLOCK;
+ while (load->size) {
+ /*
+ * We must be 4 byte aligned. Buffer must be 0 appened
+ * to have defined values when calculating CRC.
+ */
+ tocopy = min_t(size_t, load->size, FLASH_BLOCK);
+
+ dev_dbg(&pci_dev->dev,
+ "[%s] DMA: %lx SZ: %ld %d\n",
+ __func__, (unsigned long)dma_addr, tocopy,
+ blocks_to_flash);
+
+ /* prepare DDCB for SLU process */
+ cmd = ddcb_requ_alloc();
+ if (cmd == NULL) {
+ rc = -ENOMEM;
+ goto free_buffer;
+ }
+ cmd->cmd = SLCMD_MOVE_FLASH;
+ cmd->cmdopts = cmdopts;
+
+ /* prepare invariant values */
+ if (genwqe_get_slu_id(cd) <= 0x2) {
+ *(__be64 *)&cmd->__asiv[0] = cpu_to_be64(dma_addr);
+ *(__be64 *)&cmd->__asiv[8] = cpu_to_be64(tocopy);
+ *(__be64 *)&cmd->__asiv[16] = cpu_to_be64(flash);
+ *(__be32 *)&cmd->__asiv[24] = cpu_to_be32(0);
+ cmd->__asiv[24] = load->uid;
+ *(__be32 *)&cmd->__asiv[28] = cpu_to_be32(0) /* CRC */;
+ cmd->asiv_length = 32; /* bytes included in crc calc */
+ } else { /* setup DDCB for ATS architecture */
+ *(__be64 *)&cmd->asiv[0] = cpu_to_be64(dma_addr);
+ *(__be32 *)&cmd->asiv[8] = cpu_to_be32(tocopy);
+ *(__be32 *)&cmd->asiv[12] = cpu_to_be32(0); /* resvd */
+ *(__be64 *)&cmd->asiv[16] = cpu_to_be64(flash);
+ *(__be32 *)&cmd->asiv[24] = cpu_to_be32(load->uid<<24);
+ *(__be32 *)&cmd->asiv[28] = cpu_to_be32(0); /* CRC */
+
+ /* rd/wr */
+ cmd->ats = 0x5ULL << 44;
+ cmd->asiv_length = 40; /* bytes included in crc calc */
+ }
+ cmd->asv_length = 8;
+
+ /* we only get back the calculated CRC */
+ *(u64 *)&cmd->asv[0] = 0ULL; /* 0x80 */
+
+ rc = __genwqe_execute_raw_ddcb(cd, cmd);
+
+ load->retc = cmd->retc;
+ load->attn = cmd->attn;
+ load->progress = cmd->progress;
+
+ if ((rc < 0) && (rc != -EBADMSG)) {
+ ddcb_requ_free(cmd);
+ goto free_buffer;
+ }
+
+ rc = copy_to_user(buf, xbuf, tocopy);
+ if (rc) {
+ rc = -EFAULT;
+ ddcb_requ_free(cmd);
+ goto free_buffer;
+ }
+
+ /* We know that we can get retc 0x104 with CRC err */
+ if (((cmd->retc == DDCB_RETC_FAULT) &&
+ (cmd->attn != 0x02)) || /* Normally ignore CRC error */
+ ((cmd->retc == DDCB_RETC_COMPLETE) &&
+ (cmd->attn != 0x00))) { /* Everything was fine */
+ rc = -EIO;
+ ddcb_requ_free(cmd);
+ goto free_buffer;
+ }
+
+ load->size -= tocopy;
+ flash += tocopy;
+ buf += tocopy;
+ blocks_to_flash--;
+ ddcb_requ_free(cmd);
+ }
+ rc = 0;
+
+ free_buffer:
+ __genwqe_free_consistent(cd, FLASH_BLOCK, xbuf, dma_addr);
+ return rc;
+}
+
+static int genwqe_pin_mem(struct genwqe_file *cfile, struct genwqe_mem *m)
+{
+ int rc;
+ struct genwqe_dev *cd = cfile->cd;
+ struct pci_dev *pci_dev = cfile->cd->pci_dev;
+ struct dma_mapping *dma_map;
+ unsigned long map_addr;
+ unsigned long map_size;
+
+ if ((m->addr == 0x0) || (m->size == 0))
+ return -EINVAL;
+
+ map_addr = (m->addr & PAGE_MASK);
+ map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE);
+
+ dma_map = kzalloc(sizeof(struct dma_mapping), GFP_ATOMIC);
+ if (dma_map == NULL)
+ return -ENOMEM;
+
+ genwqe_mapping_init(dma_map, GENWQE_MAPPING_SGL_PINNED);
+ rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size, NULL);
+ if (rc != 0) {
+ dev_err(&pci_dev->dev,
+ "[%s] genwqe_user_vmap rc=%d\n", __func__, rc);
+ return rc;
+ }
+
+ genwqe_add_pin(cfile, dma_map);
+ return 0;
+}
+
+static int genwqe_unpin_mem(struct genwqe_file *cfile, struct genwqe_mem *m)
+{
+ struct genwqe_dev *cd = cfile->cd;
+ struct dma_mapping *dma_map;
+ unsigned long map_addr;
+ unsigned long map_size;
+
+ if (m->addr == 0x0)
+ return -EINVAL;
+
+ map_addr = (m->addr & PAGE_MASK);
+ map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE);
+
+ dma_map = genwqe_search_pin(cfile, map_addr, map_size, NULL);
+ if (dma_map == NULL)
+ return -ENOENT;
+
+ genwqe_del_pin(cfile, dma_map);
+ genwqe_user_vunmap(cd, dma_map, NULL);
+ kfree(dma_map);
+ return 0;
+}
+
+/**
+ * ddcb_cmd_cleanup() - Remove dynamically created fixup entries
+ *
+ * Only if there are any. Pinnings are not removed.
+ */
+static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req)
+{
+ unsigned int i;
+ struct dma_mapping *dma_map;
+ struct genwqe_dev *cd = cfile->cd;
+
+ for (i = 0; i < DDCB_FIXUPS; i++) {
+ dma_map = &req->dma_mappings[i];
+
+ if (dma_mapping_used(dma_map)) {
+ __genwqe_del_mapping(cfile, dma_map);
+ genwqe_user_vunmap(cd, dma_map, req);
+ }
+ if (req->sgl[i] != NULL) {
+ genwqe_free_sgl(cd, req->sgl[i],
+ req->sgl_dma_addr[i],
+ req->sgl_size[i]);
+ req->sgl[i] = NULL;
+ req->sgl_dma_addr[i] = 0x0;
+ req->sgl_size[i] = 0;
+ }
+
+ }
+ return 0;
+}
+
+/**
+ * ddcb_cmd_fixups() - Establish DMA fixups/sglists for user memory references
+ *
+ * Before the DDCB gets executed we need to handle the fixups. We
+ * replace the user-space addresses with DMA addresses or do
+ * additional setup work e.g. generating a scatter-gather list which
+ * is used to describe the memory referred to in the fixup.
+ */
+static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
+{
+ int rc;
+ unsigned int asiv_offs, i;
+ struct genwqe_dev *cd = cfile->cd;
+ struct genwqe_ddcb_cmd *cmd = &req->cmd;
+ struct dma_mapping *m;
+ const char *type = "UNKNOWN";
+
+ for (i = 0, asiv_offs = 0x00; asiv_offs <= 0x58;
+ i++, asiv_offs += 0x08) {
+
+ u64 u_addr;
+ dma_addr_t d_addr;
+ u32 u_size = 0;
+ u64 ats_flags;
+
+ ats_flags = ATS_GET_FLAGS(cmd->ats, asiv_offs);
+
+ switch (ats_flags) {
+
+ case ATS_TYPE_DATA:
+ break; /* nothing to do here */
+
+ case ATS_TYPE_FLAT_RDWR:
+ case ATS_TYPE_FLAT_RD: {
+ u_addr = be64_to_cpu(*((__be64 *)&cmd->
+ asiv[asiv_offs]));
+ u_size = be32_to_cpu(*((__be32 *)&cmd->
+ asiv[asiv_offs + 0x08]));
+
+ /*
+ * No data available. Ignore u_addr in this
+ * case and set addr to 0. Hardware must not
+ * fetch the buffer.
+ */
+ if (u_size == 0x0) {
+ *((__be64 *)&cmd->asiv[asiv_offs]) =
+ cpu_to_be64(0x0);
+ break;
+ }
+
+ m = __genwqe_search_mapping(cfile, u_addr, u_size,
+ &d_addr, NULL);
+ if (m == NULL) {
+ rc = -EFAULT;
+ goto err_out;
+ }
+
+ *((__be64 *)&cmd->asiv[asiv_offs]) =
+ cpu_to_be64(d_addr);
+ break;
+ }
+
+ case ATS_TYPE_SGL_RDWR:
+ case ATS_TYPE_SGL_RD: {
+ int page_offs, nr_pages, offs;
+
+ u_addr = be64_to_cpu(*((__be64 *)
+ &cmd->asiv[asiv_offs]));
+ u_size = be32_to_cpu(*((__be32 *)
+ &cmd->asiv[asiv_offs + 0x08]));
+
+ /*
+ * No data available. Ignore u_addr in this
+ * case and set addr to 0. Hardware must not
+ * fetch the empty sgl.
+ */
+ if (u_size == 0x0) {
+ *((__be64 *)&cmd->asiv[asiv_offs]) =
+ cpu_to_be64(0x0);
+ break;
+ }
+
+ m = genwqe_search_pin(cfile, u_addr, u_size, NULL);
+ if (m != NULL) {
+ type = "PINNING";
+ page_offs = (u_addr -
+ (u64)m->u_vaddr)/PAGE_SIZE;
+ } else {
+ type = "MAPPING";
+ m = &req->dma_mappings[i];
+
+ genwqe_mapping_init(m,
+ GENWQE_MAPPING_SGL_TEMP);
+ rc = genwqe_user_vmap(cd, m, (void *)u_addr,
+ u_size, req);
+ if (rc != 0)
+ goto err_out;
+
+ __genwqe_add_mapping(cfile, m);
+ page_offs = 0;
+ }
+
+ offs = offset_in_page(u_addr);
+ nr_pages = DIV_ROUND_UP(offs + u_size, PAGE_SIZE);
+
+ /* create genwqe style scatter gather list */
+ req->sgl[i] = genwqe_alloc_sgl(cd, m->nr_pages,
+ &req->sgl_dma_addr[i],
+ &req->sgl_size[i]);
+ if (req->sgl[i] == NULL) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ genwqe_setup_sgl(cd, offs, u_size,
+ req->sgl[i],
+ req->sgl_dma_addr[i],
+ req->sgl_size[i],
+ m->dma_list,
+ page_offs,
+ nr_pages);
+
+ *((__be64 *)&cmd->asiv[asiv_offs]) =
+ cpu_to_be64(req->sgl_dma_addr[i]);
+
+ break;
+ }
+ default:
+ rc = -EINVAL;
+ goto err_out;
+ }
+ }
+ return 0;
+
+ err_out:
+ ddcb_cmd_cleanup(cfile, req);
+ return rc;
+}
+
+/**
+ * genwqe_execute_ddcb() - Execute DDCB using userspace address fixups
+ *
+ * The code will build up the translation tables or lookup the
+ * contignous memory allocation table to find the right translations
+ * and DMA addresses.
+ */
+static int genwqe_execute_ddcb(struct genwqe_file *cfile,
+ struct genwqe_ddcb_cmd *cmd)
+{
+ int rc;
+ struct genwqe_dev *cd = cfile->cd;
+ struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd);
+
+ rc = ddcb_cmd_fixups(cfile, req);
+ if (rc != 0)
+ return rc;
+
+ rc = __genwqe_execute_raw_ddcb(cd, cmd);
+ ddcb_cmd_cleanup(cfile, req);
+ return rc;
+}
+
+static int do_execute_ddcb(struct genwqe_file *cfile,
+ unsigned long arg, int raw)
+{
+ int rc;
+ struct genwqe_ddcb_cmd *cmd;
+ struct ddcb_requ *req;
+ struct genwqe_dev *cd = cfile->cd;
+
+ cmd = ddcb_requ_alloc();
+ if (cmd == NULL)
+ return -ENOMEM;
+
+ req = container_of(cmd, struct ddcb_requ, cmd);
+
+ if (copy_from_user(cmd, (void __user *)arg, sizeof(*cmd))) {
+ ddcb_requ_free(cmd);
+ return -EFAULT;
+ }
+
+ if (!raw)
+ rc = genwqe_execute_ddcb(cfile, cmd);
+ else
+ rc = __genwqe_execute_raw_ddcb(cd, cmd);
+
+ /* Copy back only the modifed fields. Do not copy ASIV
+ back since the copy got modified by the driver. */
+ if (copy_to_user((void __user *)arg, cmd,
+ sizeof(*cmd) - DDCB_ASIV_LENGTH)) {
+ ddcb_requ_free(cmd);
+ return -EFAULT;
+ }
+
+ ddcb_requ_free(cmd);
+ return rc;
+}
+
+/**
+ * genwqe_ioctl() - IO control
+ * @filp: file handle
+ * @cmd: command identifier (passed from user)
+ * @arg: argument (passed from user)
+ *
+ * Return: 0 success
+ */
+static long genwqe_ioctl(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ int rc = 0;
+ struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data;
+ struct genwqe_dev *cd = cfile->cd;
+ struct genwqe_reg_io __user *io;
+ u64 val;
+ u32 reg_offs;
+
+ if (_IOC_TYPE(cmd) != GENWQE_IOC_CODE)
+ return -EINVAL;
+
+ switch (cmd) {
+
+ case GENWQE_GET_CARD_STATE:
+ put_user(cd->card_state, (enum genwqe_card_state __user *)arg);
+ return 0;
+
+ /* Register access */
+ case GENWQE_READ_REG64: {
+ io = (struct genwqe_reg_io __user *)arg;
+
+ if (get_user(reg_offs, &io->num))
+ return -EFAULT;
+
+ if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x7))
+ return -EINVAL;
+
+ val = __genwqe_readq(cd, reg_offs);
+ put_user(val, &io->val64);
+ return 0;
+ }
+
+ case GENWQE_WRITE_REG64: {
+ io = (struct genwqe_reg_io __user *)arg;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
+ return -EPERM;
+
+ if (get_user(reg_offs, &io->num))
+ return -EFAULT;
+
+ if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x7))
+ return -EINVAL;
+
+ if (get_user(val, &io->val64))
+ return -EFAULT;
+
+ __genwqe_writeq(cd, reg_offs, val);
+ return 0;
+ }
+
+ case GENWQE_READ_REG32: {
+ io = (struct genwqe_reg_io __user *)arg;
+
+ if (get_user(reg_offs, &io->num))
+ return -EFAULT;
+
+ if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x3))
+ return -EINVAL;
+
+ val = __genwqe_readl(cd, reg_offs);
+ put_user(val, &io->val64);
+ return 0;
+ }
+
+ case GENWQE_WRITE_REG32: {
+ io = (struct genwqe_reg_io __user *)arg;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
+ return -EPERM;
+
+ if (get_user(reg_offs, &io->num))
+ return -EFAULT;
+
+ if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x3))
+ return -EINVAL;
+
+ if (get_user(val, &io->val64))
+ return -EFAULT;
+
+ __genwqe_writel(cd, reg_offs, val);
+ return 0;
+ }
+
+ /* Flash update/reading */
+ case GENWQE_SLU_UPDATE: {
+ struct genwqe_bitstream load;
+
+ if (!genwqe_is_privileged(cd))
+ return -EPERM;
+
+ if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
+ return -EPERM;
+
+ if (copy_from_user(&load, (void __user *)arg,
+ sizeof(load)))
+ return -EFAULT;
+
+ rc = do_flash_update(cfile, &load);
+
+ if (copy_to_user((void __user *)arg, &load, sizeof(load)))
+ return -EFAULT;
+
+ return rc;
+ }
+
+ case GENWQE_SLU_READ: {
+ struct genwqe_bitstream load;
+
+ if (!genwqe_is_privileged(cd))
+ return -EPERM;
+
+ if (genwqe_flash_readback_fails(cd))
+ return -ENOSPC; /* known to fail for old versions */
+
+ if (copy_from_user(&load, (void __user *)arg, sizeof(load)))
+ return -EFAULT;
+
+ rc = do_flash_read(cfile, &load);
+
+ if (copy_to_user((void __user *)arg, &load, sizeof(load)))
+ return -EFAULT;
+
+ return rc;
+ }
+
+ /* memory pinning and unpinning */
+ case GENWQE_PIN_MEM: {
+ struct genwqe_mem m;
+
+ if (copy_from_user(&m, (void __user *)arg, sizeof(m)))
+ return -EFAULT;
+
+ return genwqe_pin_mem(cfile, &m);
+ }
+
+ case GENWQE_UNPIN_MEM: {
+ struct genwqe_mem m;
+
+ if (copy_from_user(&m, (void __user *)arg, sizeof(m)))
+ return -EFAULT;
+
+ return genwqe_unpin_mem(cfile, &m);
+ }
+
+ /* launch an DDCB and wait for completion */
+ case GENWQE_EXECUTE_DDCB:
+ return do_execute_ddcb(cfile, arg, 0);
+
+ case GENWQE_EXECUTE_RAW_DDCB: {
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ return do_execute_ddcb(cfile, arg, 1);
+ }
+
+ default:
+ return -EINVAL;
+ }
+
+ return rc;
+}
+
+#if defined(CONFIG_COMPAT)
+/**
+ * genwqe_compat_ioctl() - Compatibility ioctl
+ *
+ * Called whenever a 32-bit process running under a 64-bit kernel
+ * performs an ioctl on /dev/genwqe<n>_card.
+ *
+ * @filp: file pointer.
+ * @cmd: command.
+ * @arg: user argument.
+ * Return: zero on success or negative number on failure.
+ */
+static long genwqe_compat_ioctl(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ return genwqe_ioctl(filp, cmd, arg);
+}
+#endif /* defined(CONFIG_COMPAT) */
+
+static const struct file_operations genwqe_fops = {
+ .owner = THIS_MODULE,
+ .open = genwqe_open,
+ .fasync = genwqe_fasync,
+ .mmap = genwqe_mmap,
+ .unlocked_ioctl = genwqe_ioctl,
+#if defined(CONFIG_COMPAT)
+ .compat_ioctl = genwqe_compat_ioctl,
+#endif
+ .release = genwqe_release,
+};
+
+static int genwqe_device_initialized(struct genwqe_dev *cd)
+{
+ return cd->dev != NULL;
+}
+
+/**
+ * genwqe_device_create() - Create and configure genwqe char device
+ * @cd: genwqe device descriptor
+ *
+ * This function must be called before we create any more genwqe
+ * character devices, because it is allocating the major and minor
+ * number which are supposed to be used by the client drivers.
+ */
+int genwqe_device_create(struct genwqe_dev *cd)
+{
+ int rc;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ /*
+ * Here starts the individual setup per client. It must
+ * initialize its own cdev data structure with its own fops.
+ * The appropriate devnum needs to be created. The ranges must
+ * not overlap.
+ */
+ rc = alloc_chrdev_region(&cd->devnum_genwqe, 0,
+ GENWQE_MAX_MINOR, GENWQE_DEVNAME);
+ if (rc < 0) {
+ dev_err(&pci_dev->dev, "err: alloc_chrdev_region failed\n");
+ goto err_dev;
+ }
+
+ cdev_init(&cd->cdev_genwqe, &genwqe_fops);
+ cd->cdev_genwqe.owner = THIS_MODULE;
+
+ rc = cdev_add(&cd->cdev_genwqe, cd->devnum_genwqe, 1);
+ if (rc < 0) {
+ dev_err(&pci_dev->dev, "err: cdev_add failed\n");
+ goto err_add;
+ }
+
+ /*
+ * Finally the device in /dev/... must be created. The rule is
+ * to use card%d_clientname for each created device.
+ */
+ cd->dev = device_create_with_groups(cd->class_genwqe,
+ &cd->pci_dev->dev,
+ cd->devnum_genwqe, cd,
+ genwqe_attribute_groups,
+ GENWQE_DEVNAME "%u_card",
+ cd->card_idx);
+ if (IS_ERR(cd->dev)) {
+ rc = PTR_ERR(cd->dev);
+ goto err_cdev;
+ }
+
+ rc = genwqe_init_debugfs(cd);
+ if (rc != 0)
+ goto err_debugfs;
+
+ return 0;
+
+ err_debugfs:
+ device_destroy(cd->class_genwqe, cd->devnum_genwqe);
+ err_cdev:
+ cdev_del(&cd->cdev_genwqe);
+ err_add:
+ unregister_chrdev_region(cd->devnum_genwqe, GENWQE_MAX_MINOR);
+ err_dev:
+ cd->dev = NULL;
+ return rc;
+}
+
+static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd)
+{
+ int rc;
+ unsigned int i;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (!genwqe_open_files(cd))
+ return 0;
+
+ dev_warn(&pci_dev->dev, "[%s] send SIGIO and wait ...\n", __func__);
+
+ rc = genwqe_kill_fasync(cd, SIGIO);
+ if (rc > 0) {
+ /* give kill_timeout seconds to close file descriptors ... */
+ for (i = 0; (i < genwqe_kill_timeout) &&
+ genwqe_open_files(cd); i++) {
+ dev_info(&pci_dev->dev, " %d sec ...", i);
+
+ cond_resched();
+ msleep(1000);
+ }
+
+ /* if no open files we can safely continue, else ... */
+ if (!genwqe_open_files(cd))
+ return 0;
+
+ dev_warn(&pci_dev->dev,
+ "[%s] send SIGKILL and wait ...\n", __func__);
+
+ rc = genwqe_force_sig(cd, SIGKILL); /* force terminate */
+ if (rc) {
+ /* Give kill_timout more seconds to end processes */
+ for (i = 0; (i < genwqe_kill_timeout) &&
+ genwqe_open_files(cd); i++) {
+ dev_warn(&pci_dev->dev, " %d sec ...", i);
+
+ cond_resched();
+ msleep(1000);
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * genwqe_device_remove() - Remove genwqe's char device
+ *
+ * This function must be called after the client devices are removed
+ * because it will free the major/minor number range for the genwqe
+ * drivers.
+ *
+ * This function must be robust enough to be called twice.
+ */
+int genwqe_device_remove(struct genwqe_dev *cd)
+{
+ int rc;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (!genwqe_device_initialized(cd))
+ return 1;
+
+ genwqe_inform_and_stop_processes(cd);
+
+ /*
+ * We currently do wait until all filedescriptors are
+ * closed. This leads to a problem when we abort the
+ * application which will decrease this reference from
+ * 1/unused to 0/illegal and not from 2/used 1/empty.
+ */
+ rc = atomic_read(&cd->cdev_genwqe.kobj.kref.refcount);
+ if (rc != 1) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: cdev_genwqe...refcount=%d\n", __func__, rc);
+ panic("Fatal err: cannot free resources with pending references!");
+ }
+
+ genqwe_exit_debugfs(cd);
+ device_destroy(cd->class_genwqe, cd->devnum_genwqe);
+ cdev_del(&cd->cdev_genwqe);
+ unregister_chrdev_region(cd->devnum_genwqe, GENWQE_MAX_MINOR);
+ cd->dev = NULL;
+
+ return 0;
+}
diff --git a/drivers/misc/genwqe/card_sysfs.c b/drivers/misc/genwqe/card_sysfs.c
new file mode 100644
index 0000000..a72a992
--- /dev/null
+++ b/drivers/misc/genwqe/card_sysfs.c
@@ -0,0 +1,288 @@
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Sysfs interfaces for the GenWQE card. There are attributes to query
+ * the version of the bitstream as well as some for the driver. For
+ * debugging, please also see the debugfs interfaces of this driver.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+
+#include "card_base.h"
+#include "card_ddcb.h"
+
+static const char * const genwqe_types[] = {
+ [GENWQE_TYPE_ALTERA_230] = "GenWQE4-230",
+ [GENWQE_TYPE_ALTERA_530] = "GenWQE4-530",
+ [GENWQE_TYPE_ALTERA_A4] = "GenWQE5-A4",
+ [GENWQE_TYPE_ALTERA_A7] = "GenWQE5-A7",
+};
+
+static ssize_t status_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+ const char *cs[GENWQE_CARD_STATE_MAX] = { "unused", "used", "error" };
+
+ return sprintf(buf, "%s\n", cs[cd->card_state]);
+}
+static DEVICE_ATTR_RO(status);
+
+static ssize_t appid_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ char app_name[5];
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ genwqe_read_app_id(cd, app_name, sizeof(app_name));
+ return sprintf(buf, "%s\n", app_name);
+}
+static DEVICE_ATTR_RO(appid);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ u64 slu_id, app_id;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ slu_id = __genwqe_readq(cd, IO_SLU_UNITCFG);
+ app_id = __genwqe_readq(cd, IO_APP_UNITCFG);
+
+ return sprintf(buf, "%016llx.%016llx\n", slu_id, app_id);
+}
+static DEVICE_ATTR_RO(version);
+
+static ssize_t type_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ u8 card_type;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ card_type = genwqe_card_type(cd);
+ return sprintf(buf, "%s\n", (card_type >= ARRAY_SIZE(genwqe_types)) ?
+ "invalid" : genwqe_types[card_type]);
+}
+static DEVICE_ATTR_RO(type);
+
+static ssize_t driver_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", DRV_VERS_STRING);
+}
+static DEVICE_ATTR_RO(driver);
+
+static ssize_t tempsens_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ u64 tempsens;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ tempsens = __genwqe_readq(cd, IO_SLU_TEMPERATURE_SENSOR);
+ return sprintf(buf, "%016llx\n", tempsens);
+}
+static DEVICE_ATTR_RO(tempsens);
+
+static ssize_t freerunning_timer_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u64 t;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ t = __genwqe_readq(cd, IO_SLC_FREE_RUNNING_TIMER);
+ return sprintf(buf, "%016llx\n", t);
+}
+static DEVICE_ATTR_RO(freerunning_timer);
+
+static ssize_t queue_working_time_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u64 t;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ t = __genwqe_readq(cd, IO_SLC_QUEUE_WTIME);
+ return sprintf(buf, "%016llx\n", t);
+}
+static DEVICE_ATTR_RO(queue_working_time);
+
+static ssize_t base_clock_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u64 base_clock;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ base_clock = genwqe_base_clock_frequency(cd);
+ return sprintf(buf, "%lld\n", base_clock);
+}
+static DEVICE_ATTR_RO(base_clock);
+
+/**
+ * curr_bitstream_show() - Show the current bitstream id
+ *
+ * There is a bug in some old versions of the CPLD which selects the
+ * bitstream, which causes the IO_SLU_BITSTREAM register to report
+ * unreliable data in very rare cases. This makes this sysfs
+ * unreliable up to the point were a new CPLD version is being used.
+ *
+ * Unfortunately there is no automatic way yet to query the CPLD
+ * version, such that you need to manually ensure via programming
+ * tools that you have a recent version of the CPLD software.
+ *
+ * The proposed circumvention is to use a special recovery bitstream
+ * on the backup partition (0) to identify problems while loading the
+ * image.
+ */
+static ssize_t curr_bitstream_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int curr_bitstream;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ curr_bitstream = __genwqe_readq(cd, IO_SLU_BITSTREAM) & 0x1;
+ return sprintf(buf, "%d\n", curr_bitstream);
+}
+static DEVICE_ATTR_RO(curr_bitstream);
+
+/**
+ * next_bitstream_show() - Show the next activated bitstream
+ *
+ * IO_SLC_CFGREG_SOFTRESET: This register can only be accessed by the PF.
+ */
+static ssize_t next_bitstream_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int next_bitstream;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ switch ((cd->softreset & 0xc) >> 2) {
+ case 0x2:
+ next_bitstream = 0;
+ break;
+ case 0x3:
+ next_bitstream = 1;
+ break;
+ default:
+ next_bitstream = -1;
+ break; /* error */
+ }
+ return sprintf(buf, "%d\n", next_bitstream);
+}
+
+static ssize_t next_bitstream_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int partition;
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+ if (kstrtoint(buf, 0, &partition) < 0)
+ return -EINVAL;
+
+ switch (partition) {
+ case 0x0:
+ cd->softreset = 0x78;
+ break;
+ case 0x1:
+ cd->softreset = 0x7c;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, cd->softreset);
+ return count;
+}
+static DEVICE_ATTR_RW(next_bitstream);
+
+/*
+ * Create device_attribute structures / params: name, mode, show, store
+ * additional flag if valid in VF
+ */
+static struct attribute *genwqe_attributes[] = {
+ &dev_attr_tempsens.attr,
+ &dev_attr_next_bitstream.attr,
+ &dev_attr_curr_bitstream.attr,
+ &dev_attr_base_clock.attr,
+ &dev_attr_driver.attr,
+ &dev_attr_type.attr,
+ &dev_attr_version.attr,
+ &dev_attr_appid.attr,
+ &dev_attr_status.attr,
+ &dev_attr_freerunning_timer.attr,
+ &dev_attr_queue_working_time.attr,
+ NULL,
+};
+
+static struct attribute *genwqe_normal_attributes[] = {
+ &dev_attr_driver.attr,
+ &dev_attr_type.attr,
+ &dev_attr_version.attr,
+ &dev_attr_appid.attr,
+ &dev_attr_status.attr,
+ &dev_attr_freerunning_timer.attr,
+ &dev_attr_queue_working_time.attr,
+ NULL,
+};
+
+/**
+ * genwqe_is_visible() - Determine if sysfs attribute should be visible or not
+ *
+ * VFs have restricted mmio capabilities, so not all sysfs entries
+ * are allowed in VFs.
+ */
+static umode_t genwqe_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ unsigned int j;
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct genwqe_dev *cd = dev_get_drvdata(dev);
+ umode_t mode = attr->mode;
+
+ if (genwqe_is_privileged(cd))
+ return mode;
+
+ for (j = 0; genwqe_normal_attributes[j] != NULL; j++)
+ if (genwqe_normal_attributes[j] == attr)
+ return mode;
+
+ return 0;
+}
+
+static struct attribute_group genwqe_attribute_group = {
+ .is_visible = genwqe_is_visible,
+ .attrs = genwqe_attributes,
+};
+
+const struct attribute_group *genwqe_attribute_groups[] = {
+ &genwqe_attribute_group,
+ NULL,
+};
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
new file mode 100644
index 0000000..6b1a6ef
--- /dev/null
+++ b/drivers/misc/genwqe/card_utils.c
@@ -0,0 +1,944 @@
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Miscelanous functionality used in the other GenWQE driver parts.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/scatterlist.h>
+#include <linux/hugetlb.h>
+#include <linux/iommu.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <asm/pgtable.h>
+
+#include "genwqe_driver.h"
+#include "card_base.h"
+#include "card_ddcb.h"
+
+/**
+ * __genwqe_writeq() - Write 64-bit register
+ * @cd: genwqe device descriptor
+ * @byte_offs: byte offset within BAR
+ * @val: 64-bit value
+ *
+ * Return: 0 if success; < 0 if error
+ */
+int __genwqe_writeq(struct genwqe_dev *cd, u64 byte_offs, u64 val)
+{
+ if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE)
+ return -EIO;
+
+ if (cd->mmio == NULL)
+ return -EIO;
+
+ __raw_writeq((__force u64)cpu_to_be64(val), cd->mmio + byte_offs);
+ return 0;
+}
+
+/**
+ * __genwqe_readq() - Read 64-bit register
+ * @cd: genwqe device descriptor
+ * @byte_offs: offset within BAR
+ *
+ * Return: value from register
+ */
+u64 __genwqe_readq(struct genwqe_dev *cd, u64 byte_offs)
+{
+ if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE)
+ return 0xffffffffffffffffull;
+
+ if ((cd->err_inject & GENWQE_INJECT_GFIR_FATAL) &&
+ (byte_offs == IO_SLC_CFGREG_GFIR))
+ return 0x000000000000ffffull;
+
+ if ((cd->err_inject & GENWQE_INJECT_GFIR_INFO) &&
+ (byte_offs == IO_SLC_CFGREG_GFIR))
+ return 0x00000000ffff0000ull;
+
+ if (cd->mmio == NULL)
+ return 0xffffffffffffffffull;
+
+ return be64_to_cpu((__force __be64)__raw_readq(cd->mmio + byte_offs));
+}
+
+/**
+ * __genwqe_writel() - Write 32-bit register
+ * @cd: genwqe device descriptor
+ * @byte_offs: byte offset within BAR
+ * @val: 32-bit value
+ *
+ * Return: 0 if success; < 0 if error
+ */
+int __genwqe_writel(struct genwqe_dev *cd, u64 byte_offs, u32 val)
+{
+ if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE)
+ return -EIO;
+
+ if (cd->mmio == NULL)
+ return -EIO;
+
+ __raw_writel((__force u32)cpu_to_be32(val), cd->mmio + byte_offs);
+ return 0;
+}
+
+/**
+ * __genwqe_readl() - Read 32-bit register
+ * @cd: genwqe device descriptor
+ * @byte_offs: offset within BAR
+ *
+ * Return: Value from register
+ */
+u32 __genwqe_readl(struct genwqe_dev *cd, u64 byte_offs)
+{
+ if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE)
+ return 0xffffffff;
+
+ if (cd->mmio == NULL)
+ return 0xffffffff;
+
+ return be32_to_cpu((__force __be32)__raw_readl(cd->mmio + byte_offs));
+}
+
+/**
+ * genwqe_read_app_id() - Extract app_id
+ *
+ * app_unitcfg need to be filled with valid data first
+ */
+int genwqe_read_app_id(struct genwqe_dev *cd, char *app_name, int len)
+{
+ int i, j;
+ u32 app_id = (u32)cd->app_unitcfg;
+
+ memset(app_name, 0, len);
+ for (i = 0, j = 0; j < min(len, 4); j++) {
+ char ch = (char)((app_id >> (24 - j*8)) & 0xff);
+ if (ch == ' ')
+ continue;
+ app_name[i++] = isprint(ch) ? ch : 'X';
+ }
+ return i;
+}
+
+/**
+ * genwqe_init_crc32() - Prepare a lookup table for fast crc32 calculations
+ *
+ * Existing kernel functions seem to use a different polynom,
+ * therefore we could not use them here.
+ *
+ * Genwqe's Polynomial = 0x20044009
+ */
+#define CRC32_POLYNOMIAL 0x20044009
+static u32 crc32_tab[256]; /* crc32 lookup table */
+
+void genwqe_init_crc32(void)
+{
+ int i, j;
+ u32 crc;
+
+ for (i = 0; i < 256; i++) {
+ crc = i << 24;
+ for (j = 0; j < 8; j++) {
+ if (crc & 0x80000000)
+ crc = (crc << 1) ^ CRC32_POLYNOMIAL;
+ else
+ crc = (crc << 1);
+ }
+ crc32_tab[i] = crc;
+ }
+}
+
+/**
+ * genwqe_crc32() - Generate 32-bit crc as required for DDCBs
+ * @buff: pointer to data buffer
+ * @len: length of data for calculation
+ * @init: initial crc (0xffffffff at start)
+ *
+ * polynomial = x^32 * + x^29 + x^18 + x^14 + x^3 + 1 (0x20044009)
+
+ * Example: 4 bytes 0x01 0x02 0x03 0x04 with init=0xffffffff should
+ * result in a crc32 of 0xf33cb7d3.
+ *
+ * The existing kernel crc functions did not cover this polynom yet.
+ *
+ * Return: crc32 checksum.
+ */
+u32 genwqe_crc32(u8 *buff, size_t len, u32 init)
+{
+ int i;
+ u32 crc;
+
+ crc = init;
+ while (len--) {
+ i = ((crc >> 24) ^ *buff++) & 0xFF;
+ crc = (crc << 8) ^ crc32_tab[i];
+ }
+ return crc;
+}
+
+void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size,
+ dma_addr_t *dma_handle)
+{
+ if (get_order(size) > MAX_ORDER)
+ return NULL;
+
+ return pci_alloc_consistent(cd->pci_dev, size, dma_handle);
+}
+
+void __genwqe_free_consistent(struct genwqe_dev *cd, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ if (vaddr == NULL)
+ return;
+
+ pci_free_consistent(cd->pci_dev, size, vaddr, dma_handle);
+}
+
+static void genwqe_unmap_pages(struct genwqe_dev *cd, dma_addr_t *dma_list,
+ int num_pages)
+{
+ int i;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ for (i = 0; (i < num_pages) && (dma_list[i] != 0x0); i++) {
+ pci_unmap_page(pci_dev, dma_list[i],
+ PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
+ dma_list[i] = 0x0;
+ }
+}
+
+static int genwqe_map_pages(struct genwqe_dev *cd,
+ struct page **page_list, int num_pages,
+ dma_addr_t *dma_list)
+{
+ int i;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ /* establish DMA mapping for requested pages */
+ for (i = 0; i < num_pages; i++) {
+ dma_addr_t daddr;
+
+ dma_list[i] = 0x0;
+ daddr = pci_map_page(pci_dev, page_list[i],
+ 0, /* map_offs */
+ PAGE_SIZE,
+ PCI_DMA_BIDIRECTIONAL); /* FIXME rd/rw */
+
+ if (pci_dma_mapping_error(pci_dev, daddr)) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: no dma addr daddr=%016llx!\n",
+ __func__, (long long)daddr);
+ goto err;
+ }
+
+ dma_list[i] = daddr;
+ }
+ return 0;
+
+ err:
+ genwqe_unmap_pages(cd, dma_list, num_pages);
+ return -EIO;
+}
+
+static int genwqe_sgl_size(int num_pages)
+{
+ int len, num_tlb = num_pages / 7;
+
+ len = sizeof(struct sg_entry) * (num_pages+num_tlb + 1);
+ return roundup(len, PAGE_SIZE);
+}
+
+struct sg_entry *genwqe_alloc_sgl(struct genwqe_dev *cd, int num_pages,
+ dma_addr_t *dma_addr, size_t *sgl_size)
+{
+ struct pci_dev *pci_dev = cd->pci_dev;
+ struct sg_entry *sgl;
+
+ *sgl_size = genwqe_sgl_size(num_pages);
+ if (get_order(*sgl_size) > MAX_ORDER) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: too much memory requested!\n", __func__);
+ return NULL;
+ }
+
+ sgl = __genwqe_alloc_consistent(cd, *sgl_size, dma_addr);
+ if (sgl == NULL) {
+ dev_err(&pci_dev->dev,
+ "[%s] err: no memory available!\n", __func__);
+ return NULL;
+ }
+
+ return sgl;
+}
+
+int genwqe_setup_sgl(struct genwqe_dev *cd,
+ unsigned long offs,
+ unsigned long size,
+ struct sg_entry *sgl,
+ dma_addr_t dma_addr, size_t sgl_size,
+ dma_addr_t *dma_list, int page_offs, int num_pages)
+{
+ int i = 0, j = 0, p;
+ unsigned long dma_offs, map_offs;
+ struct pci_dev *pci_dev = cd->pci_dev;
+ dma_addr_t prev_daddr = 0;
+ struct sg_entry *s, *last_s = NULL;
+
+ /* sanity checks */
+ if (offs > PAGE_SIZE) {
+ dev_err(&pci_dev->dev,
+ "[%s] too large start offs %08lx\n", __func__, offs);
+ return -EFAULT;
+ }
+ if (sgl_size < genwqe_sgl_size(num_pages)) {
+ dev_err(&pci_dev->dev,
+ "[%s] sgl_size too small %08lx for %d pages\n",
+ __func__, sgl_size, num_pages);
+ return -EFAULT;
+ }
+
+ dma_offs = 128; /* next block if needed/dma_offset */
+ map_offs = offs; /* offset in first page */
+
+ s = &sgl[0]; /* first set of 8 entries */
+ p = 0; /* page */
+ while (p < num_pages) {
+ dma_addr_t daddr;
+ unsigned int size_to_map;
+
+ /* always write the chaining entry, cleanup is done later */
+ j = 0;
+ s[j].target_addr = cpu_to_be64(dma_addr + dma_offs);
+ s[j].len = cpu_to_be32(128);
+ s[j].flags = cpu_to_be32(SG_CHAINED);
+ j++;
+
+ while (j < 8) {
+ /* DMA mapping for requested page, offs, size */
+ size_to_map = min(size, PAGE_SIZE - map_offs);
+ daddr = dma_list[page_offs + p] + map_offs;
+ size -= size_to_map;
+ map_offs = 0;
+
+ if (prev_daddr == daddr) {
+ u32 prev_len = be32_to_cpu(last_s->len);
+
+ /* pr_info("daddr combining: "
+ "%016llx/%08x -> %016llx\n",
+ prev_daddr, prev_len, daddr); */
+
+ last_s->len = cpu_to_be32(prev_len +
+ size_to_map);
+
+ p++; /* process next page */
+ if (p == num_pages)
+ goto fixup; /* nothing to do */
+
+ prev_daddr = daddr + size_to_map;
+ continue;
+ }
+
+ /* start new entry */
+ s[j].target_addr = cpu_to_be64(daddr);
+ s[j].len = cpu_to_be32(size_to_map);
+ s[j].flags = cpu_to_be32(SG_DATA);
+ prev_daddr = daddr + size_to_map;
+ last_s = &s[j];
+ j++;
+
+ p++; /* process next page */
+ if (p == num_pages)
+ goto fixup; /* nothing to do */
+ }
+ dma_offs += 128;
+ s += 8; /* continue 8 elements further */
+ }
+ fixup:
+ if (j == 1) { /* combining happend on last entry! */
+ s -= 8; /* full shift needed on previous sgl block */
+ j = 7; /* shift all elements */
+ }
+
+ for (i = 0; i < j; i++) /* move elements 1 up */
+ s[i] = s[i + 1];
+
+ s[i].target_addr = cpu_to_be64(0);
+ s[i].len = cpu_to_be32(0);
+ s[i].flags = cpu_to_be32(SG_END_LIST);
+ return 0;
+}
+
+void genwqe_free_sgl(struct genwqe_dev *cd, struct sg_entry *sg_list,
+ dma_addr_t dma_addr, size_t size)
+{
+ __genwqe_free_consistent(cd, size, sg_list, dma_addr);
+}
+
+/**
+ * free_user_pages() - Give pinned pages back
+ *
+ * Documentation of get_user_pages is in mm/memory.c:
+ *
+ * If the page is written to, set_page_dirty (or set_page_dirty_lock,
+ * as appropriate) must be called after the page is finished with, and
+ * before put_page is called.
+ *
+ * FIXME Could be of use to others and might belong in the generic
+ * code, if others agree. E.g.
+ * ll_free_user_pages in drivers/staging/lustre/lustre/llite/rw26.c
+ * ceph_put_page_vector in net/ceph/pagevec.c
+ * maybe more?
+ */
+static int free_user_pages(struct page **page_list, unsigned int nr_pages,
+ int dirty)
+{
+ unsigned int i;
+
+ for (i = 0; i < nr_pages; i++) {
+ if (page_list[i] != NULL) {
+ if (dirty)
+ set_page_dirty_lock(page_list[i]);
+ put_page(page_list[i]);
+ }
+ }
+ return 0;
+}
+
+/**
+ * genwqe_user_vmap() - Map user-space memory to virtual kernel memory
+ * @cd: pointer to genwqe device
+ * @m: mapping params
+ * @uaddr: user virtual address
+ * @size: size of memory to be mapped
+ *
+ * We need to think about how we could speed this up. Of course it is
+ * not a good idea to do this over and over again, like we are
+ * currently doing it. Nevertheless, I am curious where on the path
+ * the performance is spend. Most probably within the memory
+ * allocation functions, but maybe also in the DMA mapping code.
+ *
+ * Restrictions: The maximum size of the possible mapping currently depends
+ * on the amount of memory we can get using kzalloc() for the
+ * page_list and pci_alloc_consistent for the sg_list.
+ * The sg_list is currently itself not scattered, which could
+ * be fixed with some effort. The page_list must be split into
+ * PAGE_SIZE chunks too. All that will make the complicated
+ * code more complicated.
+ *
+ * Return: 0 if success
+ */
+int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr,
+ unsigned long size, struct ddcb_requ *req)
+{
+ int rc = -EINVAL;
+ unsigned long data, offs;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if ((uaddr == NULL) || (size == 0)) {
+ m->size = 0; /* mark unused and not added */
+ return -EINVAL;
+ }
+ m->u_vaddr = uaddr;
+ m->size = size;
+
+ /* determine space needed for page_list. */
+ data = (unsigned long)uaddr;
+ offs = offset_in_page(data);
+ m->nr_pages = DIV_ROUND_UP(offs + size, PAGE_SIZE);
+
+ m->page_list = kcalloc(m->nr_pages,
+ sizeof(struct page *) + sizeof(dma_addr_t),
+ GFP_KERNEL);
+ if (!m->page_list) {
+ dev_err(&pci_dev->dev, "err: alloc page_list failed\n");
+ m->nr_pages = 0;
+ m->u_vaddr = NULL;
+ m->size = 0; /* mark unused and not added */
+ return -ENOMEM;
+ }
+ m->dma_list = (dma_addr_t *)(m->page_list + m->nr_pages);
+
+ /* pin user pages in memory */
+ rc = get_user_pages_fast(data & PAGE_MASK, /* page aligned addr */
+ m->nr_pages,
+ 1, /* write by caller */
+ m->page_list); /* ptrs to pages */
+
+ /* assumption: get_user_pages can be killed by signals. */
+ if (rc < m->nr_pages) {
+ free_user_pages(m->page_list, rc, 0);
+ rc = -EFAULT;
+ goto fail_get_user_pages;
+ }
+
+ rc = genwqe_map_pages(cd, m->page_list, m->nr_pages, m->dma_list);
+ if (rc != 0)
+ goto fail_free_user_pages;
+
+ return 0;
+
+ fail_free_user_pages:
+ free_user_pages(m->page_list, m->nr_pages, 0);
+
+ fail_get_user_pages:
+ kfree(m->page_list);
+ m->page_list = NULL;
+ m->dma_list = NULL;
+ m->nr_pages = 0;
+ m->u_vaddr = NULL;
+ m->size = 0; /* mark unused and not added */
+ return rc;
+}
+
+/**
+ * genwqe_user_vunmap() - Undo mapping of user-space mem to virtual kernel
+ * memory
+ * @cd: pointer to genwqe device
+ * @m: mapping params
+ */
+int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m,
+ struct ddcb_requ *req)
+{
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (!dma_mapping_used(m)) {
+ dev_err(&pci_dev->dev, "[%s] err: mapping %p not used!\n",
+ __func__, m);
+ return -EINVAL;
+ }
+
+ if (m->dma_list)
+ genwqe_unmap_pages(cd, m->dma_list, m->nr_pages);
+
+ if (m->page_list) {
+ free_user_pages(m->page_list, m->nr_pages, 1);
+
+ kfree(m->page_list);
+ m->page_list = NULL;
+ m->dma_list = NULL;
+ m->nr_pages = 0;
+ }
+
+ m->u_vaddr = NULL;
+ m->size = 0; /* mark as unused and not added */
+ return 0;
+}
+
+/**
+ * genwqe_card_type() - Get chip type SLU Configuration Register
+ * @cd: pointer to the genwqe device descriptor
+ * Return: 0: Altera Stratix-IV 230
+ * 1: Altera Stratix-IV 530
+ * 2: Altera Stratix-V A4
+ * 3: Altera Stratix-V A7
+ */
+u8 genwqe_card_type(struct genwqe_dev *cd)
+{
+ u64 card_type = cd->slu_unitcfg;
+ return (u8)((card_type & IO_SLU_UNITCFG_TYPE_MASK) >> 20);
+}
+
+/**
+ * genwqe_card_reset() - Reset the card
+ * @cd: pointer to the genwqe device descriptor
+ */
+int genwqe_card_reset(struct genwqe_dev *cd)
+{
+ u64 softrst;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (!genwqe_is_privileged(cd))
+ return -ENODEV;
+
+ /* new SL */
+ __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, 0x1ull);
+ msleep(1000);
+ __genwqe_readq(cd, IO_HSU_FIR_CLR);
+ __genwqe_readq(cd, IO_APP_FIR_CLR);
+ __genwqe_readq(cd, IO_SLU_FIR_CLR);
+
+ /*
+ * Read-modify-write to preserve the stealth bits
+ *
+ * For SL >= 039, Stealth WE bit allows removing
+ * the read-modify-wrote.
+ * r-m-w may require a mask 0x3C to avoid hitting hard
+ * reset again for error reset (should be 0, chicken).
+ */
+ softrst = __genwqe_readq(cd, IO_SLC_CFGREG_SOFTRESET) & 0x3cull;
+ __genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET, softrst | 0x2ull);
+
+ /* give ERRORRESET some time to finish */
+ msleep(50);
+
+ if (genwqe_need_err_masking(cd)) {
+ dev_info(&pci_dev->dev,
+ "[%s] masking errors for old bitstreams\n", __func__);
+ __genwqe_writeq(cd, IO_SLC_MISC_DEBUG, 0x0aull);
+ }
+ return 0;
+}
+
+int genwqe_read_softreset(struct genwqe_dev *cd)
+{
+ u64 bitstream;
+
+ if (!genwqe_is_privileged(cd))
+ return -ENODEV;
+
+ bitstream = __genwqe_readq(cd, IO_SLU_BITSTREAM) & 0x1;
+ cd->softreset = (bitstream == 0) ? 0x8ull : 0xcull;
+ return 0;
+}
+
+/**
+ * genwqe_set_interrupt_capability() - Configure MSI capability structure
+ * @cd: pointer to the device
+ * Return: 0 if no error
+ */
+int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count)
+{
+ int rc;
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ rc = pci_enable_msi_block(pci_dev, count);
+ if (rc == 0)
+ cd->flags |= GENWQE_FLAG_MSI_ENABLED;
+ return rc;
+}
+
+/**
+ * genwqe_reset_interrupt_capability() - Undo genwqe_set_interrupt_capability()
+ * @cd: pointer to the device
+ */
+void genwqe_reset_interrupt_capability(struct genwqe_dev *cd)
+{
+ struct pci_dev *pci_dev = cd->pci_dev;
+
+ if (cd->flags & GENWQE_FLAG_MSI_ENABLED) {
+ pci_disable_msi(pci_dev);
+ cd->flags &= ~GENWQE_FLAG_MSI_ENABLED;
+ }
+}
+
+/**
+ * set_reg_idx() - Fill array with data. Ignore illegal offsets.
+ * @cd: card device
+ * @r: debug register array
+ * @i: index to desired entry
+ * @m: maximum possible entries
+ * @addr: addr which is read
+ * @index: index in debug array
+ * @val: read value
+ */
+static int set_reg_idx(struct genwqe_dev *cd, struct genwqe_reg *r,
+ unsigned int *i, unsigned int m, u32 addr, u32 idx,
+ u64 val)
+{
+ if (WARN_ON_ONCE(*i >= m))
+ return -EFAULT;
+
+ r[*i].addr = addr;
+ r[*i].idx = idx;
+ r[*i].val = val;
+ ++*i;
+ return 0;
+}
+
+static int set_reg(struct genwqe_dev *cd, struct genwqe_reg *r,
+ unsigned int *i, unsigned int m, u32 addr, u64 val)
+{
+ return set_reg_idx(cd, r, i, m, addr, 0, val);
+}
+
+int genwqe_read_ffdc_regs(struct genwqe_dev *cd, struct genwqe_reg *regs,
+ unsigned int max_regs, int all)
+{
+ unsigned int i, j, idx = 0;
+ u32 ufir_addr, ufec_addr, sfir_addr, sfec_addr;
+ u64 gfir, sluid, appid, ufir, ufec, sfir, sfec;
+
+ /* Global FIR */
+ gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
+ set_reg(cd, regs, &idx, max_regs, IO_SLC_CFGREG_GFIR, gfir);
+
+ /* UnitCfg for SLU */
+ sluid = __genwqe_readq(cd, IO_SLU_UNITCFG); /* 0x00000000 */
+ set_reg(cd, regs, &idx, max_regs, IO_SLU_UNITCFG, sluid);
+
+ /* UnitCfg for APP */
+ appid = __genwqe_readq(cd, IO_APP_UNITCFG); /* 0x02000000 */
+ set_reg(cd, regs, &idx, max_regs, IO_APP_UNITCFG, appid);
+
+ /* Check all chip Units */
+ for (i = 0; i < GENWQE_MAX_UNITS; i++) {
+
+ /* Unit FIR */
+ ufir_addr = (i << 24) | 0x008;
+ ufir = __genwqe_readq(cd, ufir_addr);
+ set_reg(cd, regs, &idx, max_regs, ufir_addr, ufir);
+
+ /* Unit FEC */
+ ufec_addr = (i << 24) | 0x018;
+ ufec = __genwqe_readq(cd, ufec_addr);
+ set_reg(cd, regs, &idx, max_regs, ufec_addr, ufec);
+
+ for (j = 0; j < 64; j++) {
+ /* wherever there is a primary 1, read the 2ndary */
+ if (!all && (!(ufir & (1ull << j))))
+ continue;
+
+ sfir_addr = (i << 24) | (0x100 + 8 * j);
+ sfir = __genwqe_readq(cd, sfir_addr);
+ set_reg(cd, regs, &idx, max_regs, sfir_addr, sfir);
+
+ sfec_addr = (i << 24) | (0x300 + 8 * j);
+ sfec = __genwqe_readq(cd, sfec_addr);
+ set_reg(cd, regs, &idx, max_regs, sfec_addr, sfec);
+ }
+ }
+
+ /* fill with invalid data until end */
+ for (i = idx; i < max_regs; i++) {
+ regs[i].addr = 0xffffffff;
+ regs[i].val = 0xffffffffffffffffull;
+ }
+ return idx;
+}
+
+/**
+ * genwqe_ffdc_buff_size() - Calculates the number of dump registers
+ */
+int genwqe_ffdc_buff_size(struct genwqe_dev *cd, int uid)
+{
+ int entries = 0, ring, traps, traces, trace_entries;
+ u32 eevptr_addr, l_addr, d_len, d_type;
+ u64 eevptr, val, addr;
+
+ eevptr_addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_ERROR_POINTER;
+ eevptr = __genwqe_readq(cd, eevptr_addr);
+
+ if ((eevptr != 0x0) && (eevptr != -1ull)) {
+ l_addr = GENWQE_UID_OFFS(uid) | eevptr;
+
+ while (1) {
+ val = __genwqe_readq(cd, l_addr);
+
+ if ((val == 0x0) || (val == -1ull))
+ break;
+
+ /* 38:24 */
+ d_len = (val & 0x0000007fff000000ull) >> 24;
+
+ /* 39 */
+ d_type = (val & 0x0000008000000000ull) >> 36;
+
+ if (d_type) { /* repeat */
+ entries += d_len;
+ } else { /* size in bytes! */
+ entries += d_len >> 3;
+ }
+
+ l_addr += 8;
+ }
+ }
+
+ for (ring = 0; ring < 8; ring++) {
+ addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_DIAG_MAP(ring);
+ val = __genwqe_readq(cd, addr);
+
+ if ((val == 0x0ull) || (val == -1ull))
+ continue;
+
+ traps = (val >> 24) & 0xff;
+ traces = (val >> 16) & 0xff;
+ trace_entries = val & 0xffff;
+
+ entries += traps + (traces * trace_entries);
+ }
+ return entries;
+}
+
+/**
+ * genwqe_ffdc_buff_read() - Implements LogoutExtendedErrorRegisters procedure
+ */
+int genwqe_ffdc_buff_read(struct genwqe_dev *cd, int uid,
+ struct genwqe_reg *regs, unsigned int max_regs)
+{
+ int i, traps, traces, trace, trace_entries, trace_entry, ring;
+ unsigned int idx = 0;
+ u32 eevptr_addr, l_addr, d_addr, d_len, d_type;
+ u64 eevptr, e, val, addr;
+
+ eevptr_addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_ERROR_POINTER;
+ eevptr = __genwqe_readq(cd, eevptr_addr);
+
+ if ((eevptr != 0x0) && (eevptr != 0xffffffffffffffffull)) {
+ l_addr = GENWQE_UID_OFFS(uid) | eevptr;
+ while (1) {
+ e = __genwqe_readq(cd, l_addr);
+ if ((e == 0x0) || (e == 0xffffffffffffffffull))
+ break;
+
+ d_addr = (e & 0x0000000000ffffffull); /* 23:0 */
+ d_len = (e & 0x0000007fff000000ull) >> 24; /* 38:24 */
+ d_type = (e & 0x0000008000000000ull) >> 36; /* 39 */
+ d_addr |= GENWQE_UID_OFFS(uid);
+
+ if (d_type) {
+ for (i = 0; i < (int)d_len; i++) {
+ val = __genwqe_readq(cd, d_addr);
+ set_reg_idx(cd, regs, &idx, max_regs,
+ d_addr, i, val);
+ }
+ } else {
+ d_len >>= 3; /* Size in bytes! */
+ for (i = 0; i < (int)d_len; i++, d_addr += 8) {
+ val = __genwqe_readq(cd, d_addr);
+ set_reg_idx(cd, regs, &idx, max_regs,
+ d_addr, 0, val);
+ }
+ }
+ l_addr += 8;
+ }
+ }
+
+ /*
+ * To save time, there are only 6 traces poplulated on Uid=2,
+ * Ring=1. each with iters=512.
+ */
+ for (ring = 0; ring < 8; ring++) { /* 0 is fls, 1 is fds,
+ 2...7 are ASI rings */
+ addr = GENWQE_UID_OFFS(uid) | IO_EXTENDED_DIAG_MAP(ring);
+ val = __genwqe_readq(cd, addr);
+
+ if ((val == 0x0ull) || (val == -1ull))
+ continue;
+
+ traps = (val >> 24) & 0xff; /* Number of Traps */
+ traces = (val >> 16) & 0xff; /* Number of Traces */
+ trace_entries = val & 0xffff; /* Entries per trace */
+
+ /* Note: This is a combined loop that dumps both the traps */
+ /* (for the trace == 0 case) as well as the traces 1 to */
+ /* 'traces'. */
+ for (trace = 0; trace <= traces; trace++) {
+ u32 diag_sel =
+ GENWQE_EXTENDED_DIAG_SELECTOR(ring, trace);
+
+ addr = (GENWQE_UID_OFFS(uid) |
+ IO_EXTENDED_DIAG_SELECTOR);
+ __genwqe_writeq(cd, addr, diag_sel);
+
+ for (trace_entry = 0;
+ trace_entry < (trace ? trace_entries : traps);
+ trace_entry++) {
+ addr = (GENWQE_UID_OFFS(uid) |
+ IO_EXTENDED_DIAG_READ_MBX);
+ val = __genwqe_readq(cd, addr);
+ set_reg_idx(cd, regs, &idx, max_regs, addr,
+ (diag_sel<<16) | trace_entry, val);
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * genwqe_write_vreg() - Write register in virtual window
+ *
+ * Note, these registers are only accessible to the PF through the
+ * VF-window. It is not intended for the VF to access.
+ */
+int genwqe_write_vreg(struct genwqe_dev *cd, u32 reg, u64 val, int func)
+{
+ __genwqe_writeq(cd, IO_PF_SLC_VIRTUAL_WINDOW, func & 0xf);
+ __genwqe_writeq(cd, reg, val);
+ return 0;
+}
+
+/**
+ * genwqe_read_vreg() - Read register in virtual window
+ *
+ * Note, these registers are only accessible to the PF through the
+ * VF-window. It is not intended for the VF to access.
+ */
+u64 genwqe_read_vreg(struct genwqe_dev *cd, u32 reg, int func)
+{
+ __genwqe_writeq(cd, IO_PF_SLC_VIRTUAL_WINDOW, func & 0xf);
+ return __genwqe_readq(cd, reg);
+}
+
+/**
+ * genwqe_base_clock_frequency() - Deteremine base clock frequency of the card
+ *
+ * Note: From a design perspective it turned out to be a bad idea to
+ * use codes here to specifiy the frequency/speed values. An old
+ * driver cannot understand new codes and is therefore always a
+ * problem. Better is to measure out the value or put the
+ * speed/frequency directly into a register which is always a valid
+ * value for old as well as for new software.
+ *
+ * Return: Card clock in MHz
+ */
+int genwqe_base_clock_frequency(struct genwqe_dev *cd)
+{
+ u16 speed; /* MHz MHz MHz MHz */
+ static const int speed_grade[] = { 250, 200, 166, 175 };
+
+ speed = (u16)((cd->slu_unitcfg >> 28) & 0x0full);
+ if (speed >= ARRAY_SIZE(speed_grade))
+ return 0; /* illegal value */
+
+ return speed_grade[speed];
+}
+
+/**
+ * genwqe_stop_traps() - Stop traps
+ *
+ * Before reading out the analysis data, we need to stop the traps.
+ */
+void genwqe_stop_traps(struct genwqe_dev *cd)
+{
+ __genwqe_writeq(cd, IO_SLC_MISC_DEBUG_SET, 0xcull);
+}
+
+/**
+ * genwqe_start_traps() - Start traps
+ *
+ * After having read the data, we can/must enable the traps again.
+ */
+void genwqe_start_traps(struct genwqe_dev *cd)
+{
+ __genwqe_writeq(cd, IO_SLC_MISC_DEBUG_CLR, 0xcull);
+
+ if (genwqe_need_err_masking(cd))
+ __genwqe_writeq(cd, IO_SLC_MISC_DEBUG, 0x0aull);
+}
diff --git a/drivers/misc/genwqe/genwqe_driver.h b/drivers/misc/genwqe/genwqe_driver.h
new file mode 100644
index 0000000..46e916b
--- /dev/null
+++ b/drivers/misc/genwqe/genwqe_driver.h
@@ -0,0 +1,77 @@
+#ifndef __GENWQE_DRIVER_H__
+#define __GENWQE_DRIVER_H__
+
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/cdev.h>
+#include <linux/list.h>
+#include <linux/kthread.h>
+#include <linux/scatterlist.h>
+#include <linux/iommu.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+
+#include <asm/byteorder.h>
+#include <linux/genwqe/genwqe_card.h>
+
+#define DRV_VERS_STRING "2.0.0"
+
+/*
+ * Static minor number assignement, until we decide/implement
+ * something dynamic.
+ */
+#define GENWQE_MAX_MINOR 128 /* up to 128 possible genwqe devices */
+
+/**
+ * genwqe_requ_alloc() - Allocate a new DDCB execution request
+ *
+ * This data structure contains the user visiable fields of the DDCB
+ * to be executed.
+ *
+ * Return: ptr to genwqe_ddcb_cmd data structure
+ */
+struct genwqe_ddcb_cmd *ddcb_requ_alloc(void);
+
+/**
+ * ddcb_requ_free() - Free DDCB execution request.
+ * @req: ptr to genwqe_ddcb_cmd data structure.
+ */
+void ddcb_requ_free(struct genwqe_ddcb_cmd *req);
+
+u32 genwqe_crc32(u8 *buff, size_t len, u32 init);
+
+static inline void genwqe_hexdump(struct pci_dev *pci_dev,
+ const void *buff, unsigned int size)
+{
+ char prefix[32];
+
+ scnprintf(prefix, sizeof(prefix), "%s %s: ",
+ GENWQE_DEVNAME, pci_name(pci_dev));
+
+ print_hex_dump_debug(prefix, DUMP_PREFIX_OFFSET, 16, 1, buff,
+ size, true);
+}
+
+#endif /* __GENWQE_DRIVER_H__ */
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index a2edb2e..49c7a23 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -224,7 +224,7 @@
}
#ifdef CONFIG_IDE
-int jp_generic_ide_ioctl(ide_drive_t *drive, struct file *file,
+static int jp_generic_ide_ioctl(ide_drive_t *drive, struct file *file,
struct block_device *bdev, unsigned int cmd,
unsigned long arg)
{
@@ -334,9 +334,10 @@
static void execute_user_location(void *dst)
{
+ /* Intentionally crossing kernel/user memory boundary. */
void (*func)(void) = dst;
- if (copy_to_user(dst, do_nothing, EXEC_SIZE))
+ if (copy_to_user((void __user *)dst, do_nothing, EXEC_SIZE))
return;
func();
}
@@ -408,6 +409,8 @@
case CT_SPINLOCKUP:
/* Must be called twice to trigger. */
spin_lock(&lock_me_up);
+ /* Let sparse know we intended to exit holding the lock. */
+ __release(&lock_me_up);
break;
case CT_HUNG_TASK:
set_current_state(TASK_UNINTERRUPTIBLE);
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index d22c686..2fad844 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -177,7 +177,7 @@
unsigned long timeout;
int i;
- /* Only Posible if we are in timeout */
+ /* Only possible if we are in timeout */
if (!cl || cl != &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "bad file ext.\n");
return -ETIMEDOUT;
@@ -249,7 +249,7 @@
cb->response_buffer.size);
dev_dbg(&dev->pdev->dev, "amthif cb->buf_idx - %lu\n", cb->buf_idx);
- /* length is being turncated to PAGE_SIZE, however,
+ /* length is being truncated to PAGE_SIZE, however,
* the buf_idx may point beyond */
length = min_t(size_t, length, (cb->buf_idx - *offset));
@@ -316,6 +316,7 @@
mei_hdr.host_addr = dev->iamthif_cl.host_client_id;
mei_hdr.me_addr = dev->iamthif_cl.me_client_id;
mei_hdr.reserved = 0;
+ mei_hdr.internal = 0;
dev->iamthif_msg_buf_index += mei_hdr.length;
ret = mei_write_message(dev, &mei_hdr, dev->iamthif_msg_buf);
if (ret)
@@ -477,6 +478,7 @@
mei_hdr.host_addr = cl->host_client_id;
mei_hdr.me_addr = cl->me_client_id;
mei_hdr.reserved = 0;
+ mei_hdr.internal = 0;
if (*slots >= msg_slots) {
mei_hdr.length = len;
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 87c96e4..1ee2b94 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -154,7 +154,7 @@
return 0;
}
/**
- * mei_io_cb_alloc_resp_buf - allocate respose buffer
+ * mei_io_cb_alloc_resp_buf - allocate response buffer
*
* @cb: io callback structure
* @length: size of the buffer
@@ -207,7 +207,7 @@
/**
- * mei_cl_init - initializes intialize cl.
+ * mei_cl_init - initializes cl.
*
* @cl: host client to be initialized
* @dev: mei device
@@ -263,10 +263,10 @@
return NULL;
}
-/** mei_cl_link: allocte host id in the host map
+/** mei_cl_link: allocate host id in the host map
*
* @cl - host client
- * @id - fixed host id or -1 for genereting one
+ * @id - fixed host id or -1 for generic one
*
* returns 0 on success
* -EINVAL on incorrect values
@@ -282,19 +282,19 @@
dev = cl->dev;
- /* If Id is not asigned get one*/
+ /* If Id is not assigned get one*/
if (id == MEI_HOST_CLIENT_ID_ANY)
id = find_first_zero_bit(dev->host_clients_map,
MEI_CLIENTS_MAX);
if (id >= MEI_CLIENTS_MAX) {
- dev_err(&dev->pdev->dev, "id exceded %d", MEI_CLIENTS_MAX) ;
+ dev_err(&dev->pdev->dev, "id exceeded %d", MEI_CLIENTS_MAX);
return -EMFILE;
}
open_handle_count = dev->open_handle_count + dev->iamthif_open_count;
if (open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
- dev_err(&dev->pdev->dev, "open_handle_count exceded %d",
+ dev_err(&dev->pdev->dev, "open_handle_count exceeded %d",
MEI_MAX_OPEN_HANDLE_COUNT);
return -EMFILE;
}
@@ -344,8 +344,6 @@
cl->state = MEI_FILE_INITIALIZING;
- list_del_init(&cl->link);
-
return 0;
}
@@ -372,13 +370,14 @@
}
dev->dev_state = MEI_DEV_ENABLED;
+ dev->reset_count = 0;
mutex_unlock(&dev->device_lock);
}
/**
- * mei_cl_disconnect - disconnect host clinet form the me one
+ * mei_cl_disconnect - disconnect host client from the me one
*
* @cl: host client
*
@@ -457,7 +456,7 @@
*
* @cl: private data of the file object
*
- * returns ture if other client is connected, 0 - otherwise.
+ * returns true if other client is connected, false - otherwise.
*/
bool mei_cl_is_other_connecting(struct mei_cl *cl)
{
@@ -481,7 +480,7 @@
}
/**
- * mei_cl_connect - connect host clinet to the me one
+ * mei_cl_connect - connect host client to the me one
*
* @cl: host client
*
@@ -729,6 +728,7 @@
mei_hdr.host_addr = cl->host_client_id;
mei_hdr.me_addr = cl->me_client_id;
mei_hdr.reserved = 0;
+ mei_hdr.internal = cb->internal;
if (*slots >= msg_slots) {
mei_hdr.length = len;
@@ -775,7 +775,7 @@
* @cl: host client
* @cl: write callback with filled data
*
- * returns numbe of bytes sent on success, <0 on failure.
+ * returns number of bytes sent on success, <0 on failure.
*/
int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
{
@@ -828,6 +828,7 @@
mei_hdr.host_addr = cl->host_client_id;
mei_hdr.me_addr = cl->me_client_id;
mei_hdr.reserved = 0;
+ mei_hdr.internal = cb->internal;
rets = mei_write_message(dev, &mei_hdr, buf->data);
diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c
index e3870f2..a3ae154 100644
--- a/drivers/misc/mei/debugfs.c
+++ b/drivers/misc/mei/debugfs.c
@@ -43,7 +43,7 @@
mutex_lock(&dev->device_lock);
- /* if the driver is not enabled the list won't b consitent */
+ /* if the driver is not enabled the list won't be consistent */
if (dev->dev_state != MEI_DEV_ENABLED)
goto out;
@@ -101,7 +101,7 @@
/**
* mei_dbgfs_deregister - Remove the debugfs files and directories
- * @mei - pointer to mei device private dat
+ * @mei - pointer to mei device private data
*/
void mei_dbgfs_deregister(struct mei_device *dev)
{
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index 9b3a0fb..28cd74c 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -28,9 +28,9 @@
*
* @dev: the device structure
*
- * returns none.
+ * returns 0 on success -ENOMEM on allocation failure
*/
-static void mei_hbm_me_cl_allocate(struct mei_device *dev)
+static int mei_hbm_me_cl_allocate(struct mei_device *dev)
{
struct mei_me_client *clients;
int b;
@@ -44,7 +44,7 @@
dev->me_clients_num++;
if (dev->me_clients_num == 0)
- return;
+ return 0;
kfree(dev->me_clients);
dev->me_clients = NULL;
@@ -56,12 +56,10 @@
sizeof(struct mei_me_client), GFP_KERNEL);
if (!clients) {
dev_err(&dev->pdev->dev, "memory allocation for ME clients failed.\n");
- dev->dev_state = MEI_DEV_RESETTING;
- mei_reset(dev, 1);
- return;
+ return -ENOMEM;
}
dev->me_clients = clients;
- return;
+ return 0;
}
/**
@@ -85,12 +83,12 @@
}
/**
- * same_disconn_addr - tells if they have the same address
+ * mei_hbm_cl_addr_equal - tells if they have the same address
*
- * @file: private data of the file object.
- * @disconn: disconnection request.
+ * @cl: - client
+ * @buf: buffer with cl header
*
- * returns true if addres are same
+ * returns true if addresses are the same
*/
static inline
bool mei_hbm_cl_addr_equal(struct mei_cl *cl, void *buf)
@@ -128,6 +126,17 @@
return false;
}
+/**
+ * mei_hbm_idle - set hbm to idle state
+ *
+ * @dev: the device structure
+ */
+void mei_hbm_idle(struct mei_device *dev)
+{
+ dev->init_clients_timer = 0;
+ dev->hbm_state = MEI_HBM_IDLE;
+}
+
int mei_hbm_start_wait(struct mei_device *dev)
{
int ret;
@@ -137,7 +146,7 @@
mutex_unlock(&dev->device_lock);
ret = wait_event_interruptible_timeout(dev->wait_recvd_msg,
dev->hbm_state == MEI_HBM_IDLE ||
- dev->hbm_state > MEI_HBM_START,
+ dev->hbm_state >= MEI_HBM_STARTED,
mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
mutex_lock(&dev->device_lock);
@@ -153,12 +162,15 @@
* mei_hbm_start_req - sends start request message.
*
* @dev: the device structure
+ *
+ * returns 0 on success and < 0 on failure
*/
int mei_hbm_start_req(struct mei_device *dev)
{
struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
struct hbm_host_version_request *start_req;
const size_t len = sizeof(struct hbm_host_version_request);
+ int ret;
mei_hbm_hdr(mei_hdr, len);
@@ -170,12 +182,13 @@
start_req->host_version.minor_version = HBM_MINOR_VERSION;
dev->hbm_state = MEI_HBM_IDLE;
- if (mei_write_message(dev, mei_hdr, dev->wr_msg.data)) {
- dev_err(&dev->pdev->dev, "version message write failed\n");
- dev->dev_state = MEI_DEV_RESETTING;
- mei_reset(dev, 1);
- return -EIO;
+ ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "version message write failed: ret = %d\n",
+ ret);
+ return ret;
}
+
dev->hbm_state = MEI_HBM_START;
dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
return 0;
@@ -186,13 +199,15 @@
*
* @dev: the device structure
*
- * returns none.
+ * returns 0 on success and < 0 on failure
*/
-static void mei_hbm_enum_clients_req(struct mei_device *dev)
+static int mei_hbm_enum_clients_req(struct mei_device *dev)
{
struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
struct hbm_host_enum_request *enum_req;
const size_t len = sizeof(struct hbm_host_enum_request);
+ int ret;
+
/* enumerate clients */
mei_hbm_hdr(mei_hdr, len);
@@ -200,14 +215,15 @@
memset(enum_req, 0, len);
enum_req->hbm_cmd = HOST_ENUM_REQ_CMD;
- if (mei_write_message(dev, mei_hdr, dev->wr_msg.data)) {
- dev->dev_state = MEI_DEV_RESETTING;
- dev_err(&dev->pdev->dev, "enumeration request write failed.\n");
- mei_reset(dev, 1);
+ ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "enumeration request write failed: ret = %d.\n",
+ ret);
+ return ret;
}
dev->hbm_state = MEI_HBM_ENUM_CLIENTS;
dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
- return;
+ return 0;
}
/**
@@ -215,7 +231,7 @@
*
* @dev: the device structure
*
- * returns none.
+ * returns 0 on success and < 0 on failure
*/
static int mei_hbm_prop_req(struct mei_device *dev)
@@ -226,7 +242,7 @@
const size_t len = sizeof(struct hbm_props_request);
unsigned long next_client_index;
unsigned long client_num;
-
+ int ret;
client_num = dev->me_client_presentation_num;
@@ -253,12 +269,11 @@
prop_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
prop_req->address = next_client_index;
- if (mei_write_message(dev, mei_hdr, dev->wr_msg.data)) {
- dev->dev_state = MEI_DEV_RESETTING;
- dev_err(&dev->pdev->dev, "properties request write failed\n");
- mei_reset(dev, 1);
-
- return -EIO;
+ ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "properties request write failed: ret = %d\n",
+ ret);
+ return ret;
}
dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
@@ -268,7 +283,7 @@
}
/**
- * mei_hbm_stop_req_prepare - perpare stop request message
+ * mei_hbm_stop_req_prepare - prepare stop request message
*
* @dev - mei device
* @mei_hdr - mei message header
@@ -289,7 +304,7 @@
}
/**
- * mei_hbm_cl_flow_control_req - sends flow control requst.
+ * mei_hbm_cl_flow_control_req - sends flow control request.
*
* @dev: the device structure
* @cl: client info
@@ -451,7 +466,7 @@
}
/**
- * mei_hbm_cl_connect_res - connect resposne from the ME
+ * mei_hbm_cl_connect_res - connect response from the ME
*
* @dev: the device structure
* @rs: connect response bus message
@@ -505,8 +520,8 @@
/**
- * mei_hbm_fw_disconnect_req - disconnect request initiated by me
- * host sends disoconnect response
+ * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware
+ * host sends disconnect response
*
* @dev: the device structure.
* @disconnect_req: disconnect request bus message from the me
@@ -559,8 +574,10 @@
*
* @dev: the device structure
* @mei_hdr: header of bus message
+ *
+ * returns 0 on success and < 0 on failure
*/
-void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
+int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
{
struct mei_bus_message *mei_msg;
struct mei_me_client *me_client;
@@ -577,8 +594,20 @@
mei_read_slots(dev, dev->rd_msg_buf, hdr->length);
mei_msg = (struct mei_bus_message *)dev->rd_msg_buf;
+ /* ignore spurious message and prevent reset nesting
+ * hbm is put to idle during system reset
+ */
+ if (dev->hbm_state == MEI_HBM_IDLE) {
+ dev_dbg(&dev->pdev->dev, "hbm: state is idle ignore spurious messages\n");
+ return 0;
+ }
+
switch (mei_msg->hbm_cmd) {
case HOST_START_RES_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: start: response message received.\n");
+
+ dev->init_clients_timer = 0;
+
version_res = (struct hbm_host_version_response *)mei_msg;
dev_dbg(&dev->pdev->dev, "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\n",
@@ -597,73 +626,89 @@
}
if (!mei_hbm_version_is_supported(dev)) {
- dev_warn(&dev->pdev->dev, "hbm version mismatch: stopping the driver.\n");
+ dev_warn(&dev->pdev->dev, "hbm: start: version mismatch - stopping the driver.\n");
- dev->hbm_state = MEI_HBM_STOP;
+ dev->hbm_state = MEI_HBM_STOPPED;
mei_hbm_stop_req_prepare(dev, &dev->wr_msg.hdr,
dev->wr_msg.data);
- mei_write_message(dev, &dev->wr_msg.hdr,
- dev->wr_msg.data);
-
- return;
+ if (mei_write_message(dev, &dev->wr_msg.hdr,
+ dev->wr_msg.data)) {
+ dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n");
+ return -EIO;
+ }
+ break;
}
- if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
- dev->hbm_state == MEI_HBM_START) {
- dev->init_clients_timer = 0;
- mei_hbm_enum_clients_req(dev);
- } else {
- dev_err(&dev->pdev->dev, "reset: wrong host start response\n");
- mei_reset(dev, 1);
- return;
+ if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
+ dev->hbm_state != MEI_HBM_START) {
+ dev_err(&dev->pdev->dev, "hbm: start: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+
+ dev->hbm_state = MEI_HBM_STARTED;
+
+ if (mei_hbm_enum_clients_req(dev)) {
+ dev_err(&dev->pdev->dev, "hbm: start: failed to send enumeration request\n");
+ return -EIO;
}
wake_up_interruptible(&dev->wait_recvd_msg);
- dev_dbg(&dev->pdev->dev, "host start response message received.\n");
break;
case CLIENT_CONNECT_RES_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: client connect response: message received.\n");
+
connect_res = (struct hbm_client_connect_response *) mei_msg;
mei_hbm_cl_connect_res(dev, connect_res);
- dev_dbg(&dev->pdev->dev, "client connect response message received.\n");
wake_up(&dev->wait_recvd_msg);
break;
case CLIENT_DISCONNECT_RES_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: client disconnect response: message received.\n");
+
disconnect_res = (struct hbm_client_connect_response *) mei_msg;
mei_hbm_cl_disconnect_res(dev, disconnect_res);
- dev_dbg(&dev->pdev->dev, "client disconnect response message received.\n");
wake_up(&dev->wait_recvd_msg);
break;
case MEI_FLOW_CONTROL_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: client flow control response: message received.\n");
+
flow_control = (struct hbm_flow_control *) mei_msg;
mei_hbm_cl_flow_control_res(dev, flow_control);
- dev_dbg(&dev->pdev->dev, "client flow control response message received.\n");
break;
case HOST_CLIENT_PROPERTIES_RES_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: properties response: message received.\n");
+
+ dev->init_clients_timer = 0;
+
+ if (dev->me_clients == NULL) {
+ dev_err(&dev->pdev->dev, "hbm: properties response: mei_clients not allocated\n");
+ return -EPROTO;
+ }
+
props_res = (struct hbm_props_response *)mei_msg;
me_client = &dev->me_clients[dev->me_client_presentation_num];
- if (props_res->status || !dev->me_clients) {
- dev_err(&dev->pdev->dev, "reset: properties response hbm wrong status.\n");
- mei_reset(dev, 1);
- return;
+ if (props_res->status) {
+ dev_err(&dev->pdev->dev, "hbm: properties response: wrong status = %d\n",
+ props_res->status);
+ return -EPROTO;
}
if (me_client->client_id != props_res->address) {
- dev_err(&dev->pdev->dev, "reset: host properties response address mismatch\n");
- mei_reset(dev, 1);
- return;
+ dev_err(&dev->pdev->dev, "hbm: properties response: address mismatch %d ?= %d\n",
+ me_client->client_id, props_res->address);
+ return -EPROTO;
}
if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) {
- dev_err(&dev->pdev->dev, "reset: unexpected properties response\n");
- mei_reset(dev, 1);
-
- return;
+ dev_err(&dev->pdev->dev, "hbm: properties response: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
}
me_client->props = props_res->client_properties;
@@ -671,49 +716,70 @@
dev->me_client_presentation_num++;
/* request property for the next client */
- mei_hbm_prop_req(dev);
+ if (mei_hbm_prop_req(dev))
+ return -EIO;
break;
case HOST_ENUM_RES_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: enumeration response: message received\n");
+
+ dev->init_clients_timer = 0;
+
enum_res = (struct hbm_host_enum_response *) mei_msg;
BUILD_BUG_ON(sizeof(dev->me_clients_map)
< sizeof(enum_res->valid_addresses));
memcpy(dev->me_clients_map, enum_res->valid_addresses,
sizeof(enum_res->valid_addresses));
- if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
- dev->hbm_state == MEI_HBM_ENUM_CLIENTS) {
- dev->init_clients_timer = 0;
- mei_hbm_me_cl_allocate(dev);
- dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES;
- /* first property reqeust */
- mei_hbm_prop_req(dev);
- } else {
- dev_err(&dev->pdev->dev, "reset: unexpected enumeration response hbm.\n");
- mei_reset(dev, 1);
- return;
+ if (dev->dev_state != MEI_DEV_INIT_CLIENTS ||
+ dev->hbm_state != MEI_HBM_ENUM_CLIENTS) {
+ dev_err(&dev->pdev->dev, "hbm: enumeration response: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
}
+
+ if (mei_hbm_me_cl_allocate(dev)) {
+ dev_err(&dev->pdev->dev, "hbm: enumeration response: cannot allocate clients array\n");
+ return -ENOMEM;
+ }
+
+ dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES;
+
+ /* first property request */
+ if (mei_hbm_prop_req(dev))
+ return -EIO;
+
break;
case HOST_STOP_RES_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: stop response: message received\n");
- if (dev->hbm_state != MEI_HBM_STOP)
- dev_err(&dev->pdev->dev, "unexpected stop response hbm.\n");
- dev->dev_state = MEI_DEV_DISABLED;
- dev_info(&dev->pdev->dev, "reset: FW stop response.\n");
- mei_reset(dev, 1);
+ dev->init_clients_timer = 0;
+
+ if (dev->hbm_state != MEI_HBM_STOPPED) {
+ dev_err(&dev->pdev->dev, "hbm: stop response: state mismatch, [%d, %d]\n",
+ dev->dev_state, dev->hbm_state);
+ return -EPROTO;
+ }
+
+ dev->dev_state = MEI_DEV_POWER_DOWN;
+ dev_info(&dev->pdev->dev, "hbm: stop response: resetting.\n");
+ /* force the reset */
+ return -EPROTO;
break;
case CLIENT_DISCONNECT_REQ_CMD:
- /* search for client */
+ dev_dbg(&dev->pdev->dev, "hbm: disconnect request: message received\n");
+
disconnect_req = (struct hbm_client_connect_request *)mei_msg;
mei_hbm_fw_disconnect_req(dev, disconnect_req);
break;
case ME_STOP_REQ_CMD:
+ dev_dbg(&dev->pdev->dev, "hbm: stop request: message received\n");
- dev->hbm_state = MEI_HBM_STOP;
+ dev->hbm_state = MEI_HBM_STOPPED;
mei_hbm_stop_req_prepare(dev, &dev->wr_ext_msg.hdr,
dev->wr_ext_msg.data);
break;
@@ -722,5 +788,6 @@
break;
}
+ return 0;
}
diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h
index 4ae2e56..5f92188 100644
--- a/drivers/misc/mei/hbm.h
+++ b/drivers/misc/mei/hbm.h
@@ -32,13 +32,13 @@
enum mei_hbm_state {
MEI_HBM_IDLE = 0,
MEI_HBM_START,
+ MEI_HBM_STARTED,
MEI_HBM_ENUM_CLIENTS,
MEI_HBM_CLIENT_PROPERTIES,
- MEI_HBM_STARTED,
- MEI_HBM_STOP,
+ MEI_HBM_STOPPED,
};
-void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr);
+int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr);
static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length)
{
@@ -49,6 +49,7 @@
hdr->reserved = 0;
}
+void mei_hbm_idle(struct mei_device *dev);
int mei_hbm_start_req(struct mei_device *dev);
int mei_hbm_start_wait(struct mei_device *dev);
int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl);
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 3412adc..6f656c0 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -185,7 +185,7 @@
mei_me_reg_write(hw, H_CSR, hcsr);
- if (dev->dev_state == MEI_DEV_POWER_DOWN)
+ if (intr_enable == false)
mei_me_hw_reset_release(dev);
return 0;
@@ -469,7 +469,7 @@
struct mei_device *dev = (struct mei_device *) dev_id;
struct mei_cl_cb complete_list;
s32 slots;
- int rets;
+ int rets = 0;
dev_dbg(&dev->pdev->dev, "function called after ISR to handle the interrupt processing.\n");
/* initialize our complete list */
@@ -482,15 +482,10 @@
mei_clear_interrupts(dev);
/* check if ME wants a reset */
- if (!mei_hw_is_ready(dev) &&
- dev->dev_state != MEI_DEV_RESETTING &&
- dev->dev_state != MEI_DEV_INITIALIZING &&
- dev->dev_state != MEI_DEV_POWER_DOWN &&
- dev->dev_state != MEI_DEV_POWER_UP) {
- dev_dbg(&dev->pdev->dev, "FW not ready.\n");
- mei_reset(dev, 1);
- mutex_unlock(&dev->device_lock);
- return IRQ_HANDLED;
+ if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_warn(&dev->pdev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
}
/* check if we need to start the dev */
@@ -500,15 +495,12 @@
dev->recvd_hw_ready = true;
wake_up_interruptible(&dev->wait_hw_ready);
-
- mutex_unlock(&dev->device_lock);
- return IRQ_HANDLED;
} else {
+
dev_dbg(&dev->pdev->dev, "Reset Completed.\n");
mei_me_hw_reset_release(dev);
- mutex_unlock(&dev->device_lock);
- return IRQ_HANDLED;
}
+ goto end;
}
/* check slots available for reading */
slots = mei_count_full_read_slots(dev);
@@ -516,21 +508,23 @@
/* we have urgent data to send so break the read */
if (dev->wr_ext_msg.hdr.length)
break;
- dev_dbg(&dev->pdev->dev, "slots =%08x\n", slots);
- dev_dbg(&dev->pdev->dev, "call mei_irq_read_handler.\n");
+ dev_dbg(&dev->pdev->dev, "slots to read = %08x\n", slots);
rets = mei_irq_read_handler(dev, &complete_list, &slots);
- if (rets)
+ if (rets && dev->dev_state != MEI_DEV_RESETTING) {
+ schedule_work(&dev->reset_work);
goto end;
+ }
}
- rets = mei_irq_write_handler(dev, &complete_list);
-end:
- dev_dbg(&dev->pdev->dev, "end of bottom half function.\n");
- dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
- mutex_unlock(&dev->device_lock);
+ rets = mei_irq_write_handler(dev, &complete_list);
+
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
mei_irq_compl_handler(dev, &complete_list);
+end:
+ dev_dbg(&dev->pdev->dev, "interrupt thread end ret = %d\n", rets);
+ mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
}
static const struct mei_hw_ops mei_me_hw_ops = {
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index cb2f556..dd44e33 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -111,7 +111,8 @@
u32 me_addr:8;
u32 host_addr:8;
u32 length:9;
- u32 reserved:6;
+ u32 reserved:5;
+ u32 internal:1;
u32 msg_complete:1;
} __packed;
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index f7f3abb..cdd31c2 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -43,41 +43,119 @@
#undef MEI_DEV_STATE
}
-void mei_device_init(struct mei_device *dev)
+
+/**
+ * mei_cancel_work. Cancel mei background jobs
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success or < 0 if the reset hasn't succeeded
+ */
+void mei_cancel_work(struct mei_device *dev)
{
- /* setup our list array */
- INIT_LIST_HEAD(&dev->file_list);
- INIT_LIST_HEAD(&dev->device_list);
- mutex_init(&dev->device_lock);
- init_waitqueue_head(&dev->wait_hw_ready);
- init_waitqueue_head(&dev->wait_recvd_msg);
- init_waitqueue_head(&dev->wait_stop_wd);
- dev->dev_state = MEI_DEV_INITIALIZING;
+ cancel_work_sync(&dev->init_work);
+ cancel_work_sync(&dev->reset_work);
- mei_io_list_init(&dev->read_list);
- mei_io_list_init(&dev->write_list);
- mei_io_list_init(&dev->write_waiting_list);
- mei_io_list_init(&dev->ctrl_wr_list);
- mei_io_list_init(&dev->ctrl_rd_list);
-
- INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
- INIT_WORK(&dev->init_work, mei_host_client_init);
-
- INIT_LIST_HEAD(&dev->wd_cl.link);
- INIT_LIST_HEAD(&dev->iamthif_cl.link);
- mei_io_list_init(&dev->amthif_cmd_list);
- mei_io_list_init(&dev->amthif_rd_complete_list);
-
- bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
- dev->open_handle_count = 0;
-
- /*
- * Reserving the first client ID
- * 0: Reserved for MEI Bus Message communications
- */
- bitmap_set(dev->host_clients_map, 0, 1);
+ cancel_delayed_work(&dev->timer_work);
}
-EXPORT_SYMBOL_GPL(mei_device_init);
+EXPORT_SYMBOL_GPL(mei_cancel_work);
+
+/**
+ * mei_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ */
+int mei_reset(struct mei_device *dev)
+{
+ enum mei_dev_state state = dev->dev_state;
+ bool interrupts_enabled;
+ int ret;
+
+ if (state != MEI_DEV_INITIALIZING &&
+ state != MEI_DEV_DISABLED &&
+ state != MEI_DEV_POWER_DOWN &&
+ state != MEI_DEV_POWER_UP)
+ dev_warn(&dev->pdev->dev, "unexpected reset: dev_state = %s\n",
+ mei_dev_state_str(state));
+
+ /* we're already in reset, cancel the init timer
+ * if the reset was called due the hbm protocol error
+ * we need to call it before hw start
+ * so the hbm watchdog won't kick in
+ */
+ mei_hbm_idle(dev);
+
+ /* enter reset flow */
+ interrupts_enabled = state != MEI_DEV_POWER_DOWN;
+ dev->dev_state = MEI_DEV_RESETTING;
+
+ dev->reset_count++;
+ if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
+ dev_err(&dev->pdev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
+ dev->dev_state = MEI_DEV_DISABLED;
+ return -ENODEV;
+ }
+
+ ret = mei_hw_reset(dev, interrupts_enabled);
+ /* fall through and remove the sw state even if hw reset has failed */
+
+ /* no need to clean up software state in case of power up */
+ if (state != MEI_DEV_INITIALIZING &&
+ state != MEI_DEV_POWER_UP) {
+
+ /* remove all waiting requests */
+ mei_cl_all_write_clear(dev);
+
+ mei_cl_all_disconnect(dev);
+
+ /* wake up all readers and writers so they can be interrupted */
+ mei_cl_all_wakeup(dev);
+
+ /* remove entry if already in list */
+ dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
+ mei_cl_unlink(&dev->wd_cl);
+ mei_cl_unlink(&dev->iamthif_cl);
+ mei_amthif_reset_params(dev);
+ memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
+ }
+
+
+ dev->me_clients_num = 0;
+ dev->rd_msg_hdr = 0;
+ dev->wd_pending = false;
+
+ if (ret) {
+ dev_err(&dev->pdev->dev, "hw_reset failed ret = %d\n", ret);
+ dev->dev_state = MEI_DEV_DISABLED;
+ return ret;
+ }
+
+ if (state == MEI_DEV_POWER_DOWN) {
+ dev_dbg(&dev->pdev->dev, "powering down: end of reset\n");
+ dev->dev_state = MEI_DEV_DISABLED;
+ return 0;
+ }
+
+ ret = mei_hw_start(dev);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "hw_start failed ret = %d\n", ret);
+ dev->dev_state = MEI_DEV_DISABLED;
+ return ret;
+ }
+
+ dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n");
+
+ dev->dev_state = MEI_DEV_INIT_CLIENTS;
+ ret = mei_hbm_start_req(dev);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "hbm_start failed ret = %d\n", ret);
+ dev->dev_state = MEI_DEV_DISABLED;
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_reset);
/**
* mei_start - initializes host and fw to start work.
@@ -90,14 +168,21 @@
{
mutex_lock(&dev->device_lock);
- /* acknowledge interrupt and stop interupts */
+ /* acknowledge interrupt and stop interrupts */
mei_clear_interrupts(dev);
mei_hw_config(dev);
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
- mei_reset(dev, 1);
+ dev->dev_state = MEI_DEV_INITIALIZING;
+ dev->reset_count = 0;
+ mei_reset(dev);
+
+ if (dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "reset failed");
+ goto err;
+ }
if (mei_hbm_start_wait(dev)) {
dev_err(&dev->pdev->dev, "HBM haven't started");
@@ -132,101 +217,64 @@
EXPORT_SYMBOL_GPL(mei_start);
/**
- * mei_reset - resets host and fw.
+ * mei_restart - restart device after suspend
*
* @dev: the device structure
- * @interrupts_enabled: if interrupt should be enabled after reset.
+ *
+ * returns 0 on success or -ENODEV if the restart hasn't succeeded
*/
-void mei_reset(struct mei_device *dev, int interrupts_enabled)
+int mei_restart(struct mei_device *dev)
{
- bool unexpected;
- int ret;
+ int err;
- unexpected = (dev->dev_state != MEI_DEV_INITIALIZING &&
- dev->dev_state != MEI_DEV_DISABLED &&
- dev->dev_state != MEI_DEV_POWER_DOWN &&
- dev->dev_state != MEI_DEV_POWER_UP);
+ mutex_lock(&dev->device_lock);
- if (unexpected)
- dev_warn(&dev->pdev->dev, "unexpected reset: dev_state = %s\n",
- mei_dev_state_str(dev->dev_state));
+ mei_clear_interrupts(dev);
- ret = mei_hw_reset(dev, interrupts_enabled);
- if (ret) {
- dev_err(&dev->pdev->dev, "hw reset failed disabling the device\n");
- interrupts_enabled = false;
- dev->dev_state = MEI_DEV_DISABLED;
- }
+ dev->dev_state = MEI_DEV_POWER_UP;
+ dev->reset_count = 0;
- dev->hbm_state = MEI_HBM_IDLE;
+ err = mei_reset(dev);
- if (dev->dev_state != MEI_DEV_INITIALIZING &&
- dev->dev_state != MEI_DEV_POWER_UP) {
- if (dev->dev_state != MEI_DEV_DISABLED &&
- dev->dev_state != MEI_DEV_POWER_DOWN)
- dev->dev_state = MEI_DEV_RESETTING;
+ mutex_unlock(&dev->device_lock);
- /* remove all waiting requests */
- mei_cl_all_write_clear(dev);
+ if (err || dev->dev_state == MEI_DEV_DISABLED)
+ return -ENODEV;
- mei_cl_all_disconnect(dev);
-
- /* wake up all readings so they can be interrupted */
- mei_cl_all_wakeup(dev);
-
- /* remove entry if already in list */
- dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n");
- mei_cl_unlink(&dev->wd_cl);
- mei_cl_unlink(&dev->iamthif_cl);
- mei_amthif_reset_params(dev);
- memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
- }
-
- /* we're already in reset, cancel the init timer */
- dev->init_clients_timer = 0;
-
- dev->me_clients_num = 0;
- dev->rd_msg_hdr = 0;
- dev->wd_pending = false;
-
- if (!interrupts_enabled) {
- dev_dbg(&dev->pdev->dev, "intr not enabled end of reset\n");
- return;
- }
-
- ret = mei_hw_start(dev);
- if (ret) {
- dev_err(&dev->pdev->dev, "hw_start failed disabling the device\n");
- dev->dev_state = MEI_DEV_DISABLED;
- return;
- }
-
- dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n");
- /* link is established * start sending messages. */
-
- dev->dev_state = MEI_DEV_INIT_CLIENTS;
-
- mei_hbm_start_req(dev);
-
+ return 0;
}
-EXPORT_SYMBOL_GPL(mei_reset);
+EXPORT_SYMBOL_GPL(mei_restart);
+
+
+static void mei_reset_work(struct work_struct *work)
+{
+ struct mei_device *dev =
+ container_of(work, struct mei_device, reset_work);
+
+ mutex_lock(&dev->device_lock);
+
+ mei_reset(dev);
+
+ mutex_unlock(&dev->device_lock);
+
+ if (dev->dev_state == MEI_DEV_DISABLED)
+ dev_err(&dev->pdev->dev, "reset failed");
+}
void mei_stop(struct mei_device *dev)
{
dev_dbg(&dev->pdev->dev, "stopping the device.\n");
- flush_scheduled_work();
+ mei_cancel_work(dev);
+
+ mei_nfc_host_exit(dev);
mutex_lock(&dev->device_lock);
- cancel_delayed_work(&dev->timer_work);
-
mei_wd_stop(dev);
- mei_nfc_host_exit();
-
dev->dev_state = MEI_DEV_POWER_DOWN;
- mei_reset(dev, 0);
+ mei_reset(dev);
mutex_unlock(&dev->device_lock);
@@ -236,3 +284,41 @@
+void mei_device_init(struct mei_device *dev)
+{
+ /* setup our list array */
+ INIT_LIST_HEAD(&dev->file_list);
+ INIT_LIST_HEAD(&dev->device_list);
+ mutex_init(&dev->device_lock);
+ init_waitqueue_head(&dev->wait_hw_ready);
+ init_waitqueue_head(&dev->wait_recvd_msg);
+ init_waitqueue_head(&dev->wait_stop_wd);
+ dev->dev_state = MEI_DEV_INITIALIZING;
+ dev->reset_count = 0;
+
+ mei_io_list_init(&dev->read_list);
+ mei_io_list_init(&dev->write_list);
+ mei_io_list_init(&dev->write_waiting_list);
+ mei_io_list_init(&dev->ctrl_wr_list);
+ mei_io_list_init(&dev->ctrl_rd_list);
+
+ INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
+ INIT_WORK(&dev->init_work, mei_host_client_init);
+ INIT_WORK(&dev->reset_work, mei_reset_work);
+
+ INIT_LIST_HEAD(&dev->wd_cl.link);
+ INIT_LIST_HEAD(&dev->iamthif_cl.link);
+ mei_io_list_init(&dev->amthif_cmd_list);
+ mei_io_list_init(&dev->amthif_rd_complete_list);
+
+ bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX);
+ dev->open_handle_count = 0;
+
+ /*
+ * Reserving the first client ID
+ * 0: Reserved for MEI Bus Message communications
+ */
+ bitmap_set(dev->host_clients_map, 0, 1);
+}
+EXPORT_SYMBOL_GPL(mei_device_init);
+
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 7a95c07..f0fbb51 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -31,7 +31,7 @@
/**
- * mei_irq_compl_handler - dispatch complete handelers
+ * mei_irq_compl_handler - dispatch complete handlers
* for the completed callbacks
*
* @dev - mei device
@@ -301,13 +301,11 @@
struct mei_cl_cb *cmpl_list, s32 *slots)
{
struct mei_msg_hdr *mei_hdr;
- struct mei_cl *cl_pos = NULL;
- struct mei_cl *cl_next = NULL;
- int ret = 0;
+ struct mei_cl *cl;
+ int ret;
if (!dev->rd_msg_hdr) {
dev->rd_msg_hdr = mei_read_hdr(dev);
- dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots);
(*slots)--;
dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots);
}
@@ -315,61 +313,67 @@
dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
if (mei_hdr->reserved || !dev->rd_msg_hdr) {
- dev_dbg(&dev->pdev->dev, "corrupted message header.\n");
+ dev_err(&dev->pdev->dev, "corrupted message header 0x%08X\n",
+ dev->rd_msg_hdr);
ret = -EBADMSG;
goto end;
}
- if (mei_hdr->host_addr || mei_hdr->me_addr) {
- list_for_each_entry_safe(cl_pos, cl_next,
- &dev->file_list, link) {
- dev_dbg(&dev->pdev->dev,
- "list_for_each_entry_safe read host"
- " client = %d, ME client = %d\n",
- cl_pos->host_client_id,
- cl_pos->me_client_id);
- if (mei_cl_hbm_equal(cl_pos, mei_hdr))
- break;
- }
-
- if (&cl_pos->link == &dev->file_list) {
- dev_dbg(&dev->pdev->dev, "corrupted message header\n");
- ret = -EBADMSG;
- goto end;
- }
- }
- if (((*slots) * sizeof(u32)) < mei_hdr->length) {
- dev_err(&dev->pdev->dev,
- "we can't read the message slots =%08x.\n",
+ if (mei_slots2data(*slots) < mei_hdr->length) {
+ dev_err(&dev->pdev->dev, "less data available than length=%08x.\n",
*slots);
/* we can't read the message */
ret = -ERANGE;
goto end;
}
- /* decide where to read the message too */
- if (!mei_hdr->host_addr) {
- dev_dbg(&dev->pdev->dev, "call mei_hbm_dispatch.\n");
- mei_hbm_dispatch(dev, mei_hdr);
- dev_dbg(&dev->pdev->dev, "end mei_hbm_dispatch.\n");
- } else if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id &&
- (MEI_FILE_CONNECTED == dev->iamthif_cl.state) &&
- (dev->iamthif_state == MEI_IAMTHIF_READING)) {
-
- dev_dbg(&dev->pdev->dev, "call mei_amthif_irq_read_msg.\n");
- dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
-
- ret = mei_amthif_irq_read_msg(dev, mei_hdr, cmpl_list);
- if (ret)
+ /* HBM message */
+ if (mei_hdr->host_addr == 0 && mei_hdr->me_addr == 0) {
+ ret = mei_hbm_dispatch(dev, mei_hdr);
+ if (ret) {
+ dev_dbg(&dev->pdev->dev, "mei_hbm_dispatch failed ret = %d\n",
+ ret);
goto end;
- } else {
- dev_dbg(&dev->pdev->dev, "call mei_cl_irq_read_msg.\n");
- dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
- ret = mei_cl_irq_read_msg(dev, mei_hdr, cmpl_list);
- if (ret)
- goto end;
+ }
+ goto reset_slots;
}
+ /* find recipient cl */
+ list_for_each_entry(cl, &dev->file_list, link) {
+ if (mei_cl_hbm_equal(cl, mei_hdr)) {
+ cl_dbg(dev, cl, "got a message\n");
+ break;
+ }
+ }
+
+ /* if no recipient cl was found we assume corrupted header */
+ if (&cl->link == &dev->file_list) {
+ dev_err(&dev->pdev->dev, "no destination client found 0x%08X\n",
+ dev->rd_msg_hdr);
+ ret = -EBADMSG;
+ goto end;
+ }
+
+ if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id &&
+ MEI_FILE_CONNECTED == dev->iamthif_cl.state &&
+ dev->iamthif_state == MEI_IAMTHIF_READING) {
+
+ ret = mei_amthif_irq_read_msg(dev, mei_hdr, cmpl_list);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "mei_amthif_irq_read_msg failed = %d\n",
+ ret);
+ goto end;
+ }
+ } else {
+ ret = mei_cl_irq_read_msg(dev, mei_hdr, cmpl_list);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "mei_cl_irq_read_msg failed = %d\n",
+ ret);
+ goto end;
+ }
+ }
+
+reset_slots:
/* reset the number of slots and header */
*slots = mei_count_full_read_slots(dev);
dev->rd_msg_hdr = 0;
@@ -533,7 +537,6 @@
*
* @work: pointer to the work_struct structure
*
- * NOTE: This function is called by timer interrupt work
*/
void mei_timer(struct work_struct *work)
{
@@ -548,24 +551,30 @@
mutex_lock(&dev->device_lock);
- if (dev->dev_state != MEI_DEV_ENABLED) {
- if (dev->dev_state == MEI_DEV_INIT_CLIENTS) {
- if (dev->init_clients_timer) {
- if (--dev->init_clients_timer == 0) {
- dev_err(&dev->pdev->dev, "reset: init clients timeout hbm_state = %d.\n",
- dev->hbm_state);
- mei_reset(dev, 1);
- }
+
+ /* Catch interrupt stalls during HBM init handshake */
+ if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
+ dev->hbm_state != MEI_HBM_IDLE) {
+
+ if (dev->init_clients_timer) {
+ if (--dev->init_clients_timer == 0) {
+ dev_err(&dev->pdev->dev, "timer: init clients timeout hbm_state = %d.\n",
+ dev->hbm_state);
+ mei_reset(dev);
+ goto out;
}
}
- goto out;
}
+
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ goto out;
+
/*** connect/disconnect timeouts ***/
list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) {
if (cl_pos->timer_count) {
if (--cl_pos->timer_count == 0) {
- dev_err(&dev->pdev->dev, "reset: connect/disconnect timeout.\n");
- mei_reset(dev, 1);
+ dev_err(&dev->pdev->dev, "timer: connect/disconnect timeout.\n");
+ mei_reset(dev);
goto out;
}
}
@@ -573,8 +582,8 @@
if (dev->iamthif_stall_timer) {
if (--dev->iamthif_stall_timer == 0) {
- dev_err(&dev->pdev->dev, "reset: amthif hanged.\n");
- mei_reset(dev, 1);
+ dev_err(&dev->pdev->dev, "timer: amthif hanged.\n");
+ mei_reset(dev);
dev->iamthif_msg_buf_size = 0;
dev->iamthif_msg_buf_index = 0;
dev->iamthif_canceled = false;
@@ -627,7 +636,8 @@
}
}
out:
- schedule_delayed_work(&dev->timer_work, 2 * HZ);
+ if (dev->dev_state != MEI_DEV_DISABLED)
+ schedule_delayed_work(&dev->timer_work, 2 * HZ);
mutex_unlock(&dev->device_lock);
}
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 9661a81..5424f8f 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -48,7 +48,7 @@
*
* @inode: pointer to inode structure
* @file: pointer to file structure
- e
+ *
* returns 0 on success, <0 on error
*/
static int mei_open(struct inode *inode, struct file *file)
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 406f68e..f7de95b 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -61,11 +61,16 @@
#define MEI_CLIENTS_MAX 256
/*
+ * maximum number of consecutive resets
+ */
+#define MEI_MAX_CONSEC_RESET 3
+
+/*
* Number of File descriptors/handles
* that can be opened to the driver.
*
* Limit to 255: 256 Total Clients
- * minus internal client for MEI Bus Messags
+ * minus internal client for MEI Bus Messages
*/
#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1)
@@ -178,9 +183,10 @@
unsigned long buf_idx;
unsigned long read_time;
struct file *file_object;
+ u32 internal:1;
};
-/* MEI client instance carried as file->pirvate_data*/
+/* MEI client instance carried as file->private_data*/
struct mei_cl {
struct list_head link;
struct mei_device *dev;
@@ -326,6 +332,7 @@
/**
* struct mei_device - MEI private device struct
+ * @reset_count - limits the number of consecutive resets
* @hbm_state - state of host bus message protocol
* @mem_addr - mem mapped base register address
@@ -369,6 +376,7 @@
/*
* mei device states
*/
+ unsigned long reset_count;
enum mei_dev_state dev_state;
enum mei_hbm_state hbm_state;
u16 init_clients_timer;
@@ -427,6 +435,7 @@
bool iamthif_canceled;
struct work_struct init_work;
+ struct work_struct reset_work;
/* List of bus devices */
struct list_head device_list;
@@ -456,13 +465,25 @@
return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, 4);
}
+/**
+ * mei_slots2data- get data in slots - bytes from slots
+ * @slots - number of available slots
+ * returns - number of bytes in slots
+ */
+static inline u32 mei_slots2data(int slots)
+{
+ return slots * 4;
+}
+
/*
* mei init function prototypes
*/
void mei_device_init(struct mei_device *dev);
-void mei_reset(struct mei_device *dev, int interrupts);
+int mei_reset(struct mei_device *dev);
int mei_start(struct mei_device *dev);
+int mei_restart(struct mei_device *dev);
void mei_stop(struct mei_device *dev);
+void mei_cancel_work(struct mei_device *dev);
/*
* MEI interrupt functions prototype
@@ -510,7 +531,7 @@
* NFC functions
*/
int mei_nfc_host_init(struct mei_device *dev);
-void mei_nfc_host_exit(void);
+void mei_nfc_host_exit(struct mei_device *dev);
/*
* NFC Client UUID
@@ -626,9 +647,9 @@
int mei_register(struct mei_device *dev);
void mei_deregister(struct mei_device *dev);
-#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d comp=%1d"
+#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d internal=%1d comp=%1d"
#define MEI_HDR_PRM(hdr) \
(hdr)->host_addr, (hdr)->me_addr, \
- (hdr)->length, (hdr)->msg_complete
+ (hdr)->length, (hdr)->internal, (hdr)->msg_complete
#endif
diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c
index 994ca4a..a58320c 100644
--- a/drivers/misc/mei/nfc.c
+++ b/drivers/misc/mei/nfc.c
@@ -92,7 +92,7 @@
* @cl: NFC host client
* @cl_info: NFC info host client
* @init_work: perform connection to the info client
- * @fw_ivn: NFC Intervace Version Number
+ * @fw_ivn: NFC Interface Version Number
* @vendor_id: NFC manufacturer ID
* @radio_type: NFC radio type
*/
@@ -163,7 +163,7 @@
return 0;
default:
- dev_err(&dev->pdev->dev, "Unknow radio type 0x%x\n",
+ dev_err(&dev->pdev->dev, "Unknown radio type 0x%x\n",
ndev->radio_type);
return -EINVAL;
@@ -175,14 +175,14 @@
ndev->bus_name = "pn544";
return 0;
default:
- dev_err(&dev->pdev->dev, "Unknow radio type 0x%x\n",
+ dev_err(&dev->pdev->dev, "Unknown radio type 0x%x\n",
ndev->radio_type);
return -EINVAL;
}
default:
- dev_err(&dev->pdev->dev, "Unknow vendor ID 0x%x\n",
+ dev_err(&dev->pdev->dev, "Unknown vendor ID 0x%x\n",
ndev->vendor_id);
return -EINVAL;
@@ -428,7 +428,7 @@
mutex_unlock(&dev->device_lock);
if (mei_nfc_if_version(ndev) < 0) {
- dev_err(&dev->pdev->dev, "Could not get the NFC interfave version");
+ dev_err(&dev->pdev->dev, "Could not get the NFC interface version");
goto err;
}
@@ -469,7 +469,9 @@
return;
err:
+ mutex_lock(&dev->device_lock);
mei_nfc_free(ndev);
+ mutex_unlock(&dev->device_lock);
return;
}
@@ -481,7 +483,7 @@
struct mei_cl *cl_info, *cl = NULL;
int i, ret;
- /* already initialzed */
+ /* already initialized */
if (ndev->cl_info)
return 0;
@@ -547,12 +549,16 @@
return ret;
}
-void mei_nfc_host_exit(void)
+void mei_nfc_host_exit(struct mei_device *dev)
{
struct mei_nfc_dev *ndev = &nfc_dev;
+ cancel_work_sync(&ndev->init_work);
+
+ mutex_lock(&dev->device_lock);
if (ndev->cl && ndev->cl->device)
mei_cl_remove_device(ndev->cl->device);
mei_nfc_free(ndev);
+ mutex_unlock(&dev->device_lock);
}
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 2cab3c0..ddadd08 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -144,6 +144,21 @@
dev_err(&pdev->dev, "failed to get pci regions.\n");
goto disable_device;
}
+
+ if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err)
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ }
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
+ goto release_regions;
+ }
+
+
/* allocates and initializes the mei dev structure */
dev = mei_me_dev_init(pdev);
if (!dev) {
@@ -197,8 +212,8 @@
return 0;
release_irq:
+ mei_cancel_work(dev);
mei_disable_interrupts(dev);
- flush_scheduled_work();
free_irq(pdev->irq, dev);
disable_msi:
pci_disable_msi(pdev);
@@ -306,16 +321,14 @@
return err;
}
- mutex_lock(&dev->device_lock);
- dev->dev_state = MEI_DEV_POWER_UP;
- mei_clear_interrupts(dev);
- mei_reset(dev, 1);
- mutex_unlock(&dev->device_lock);
+ err = mei_restart(dev);
+ if (err)
+ return err;
/* Start timer if stopped in suspend */
schedule_delayed_work(&dev->timer_work, HZ);
- return err;
+ return 0;
}
static SIMPLE_DEV_PM_OPS(mei_me_pm_ops, mei_me_pci_suspend, mei_me_pci_resume);
#define MEI_ME_PM_OPS (&mei_me_pm_ops)
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index 9e35421..f70945e 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -115,6 +115,7 @@
hdr.me_addr = dev->wd_cl.me_client_id;
hdr.msg_complete = 1;
hdr.reserved = 0;
+ hdr.internal = 0;
if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE))
hdr.length = MEI_WD_START_MSG_SIZE;
diff --git a/drivers/misc/mic/host/mic_device.h b/drivers/misc/mic/host/mic_device.h
index 3574cc3..b2da289 100644
--- a/drivers/misc/mic/host/mic_device.h
+++ b/drivers/misc/mic/host/mic_device.h
@@ -134,6 +134,8 @@
* @send_intr: Send an interrupt for a particular doorbell on the card.
* @ack_interrupt: Hardware specific operations to ack the h/w on
* receipt of an interrupt.
+ * @intr_workarounds: Hardware specific workarounds needed after
+ * handling an interrupt.
* @reset: Reset the remote processor.
* @reset_fw_ready: Reset firmware ready field.
* @is_fw_ready: Check if firmware is ready for OS download.
@@ -149,6 +151,7 @@
void (*write_spad)(struct mic_device *mdev, unsigned int idx, u32 val);
void (*send_intr)(struct mic_device *mdev, int doorbell);
u32 (*ack_interrupt)(struct mic_device *mdev);
+ void (*intr_workarounds)(struct mic_device *mdev);
void (*reset)(struct mic_device *mdev);
void (*reset_fw_ready)(struct mic_device *mdev);
bool (*is_fw_ready)(struct mic_device *mdev);
diff --git a/drivers/misc/mic/host/mic_main.c b/drivers/misc/mic/host/mic_main.c
index ad838c7..c04a021 100644
--- a/drivers/misc/mic/host/mic_main.c
+++ b/drivers/misc/mic/host/mic_main.c
@@ -115,7 +115,7 @@
struct mic_device *mdev = data;
struct mic_bootparam *bootparam = mdev->dp;
- mdev->ops->ack_interrupt(mdev);
+ mdev->ops->intr_workarounds(mdev);
switch (bootparam->shutdown_status) {
case MIC_HALTED:
diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c
index e04bb4f..752ff87 100644
--- a/drivers/misc/mic/host/mic_virtio.c
+++ b/drivers/misc/mic/host/mic_virtio.c
@@ -369,7 +369,7 @@
struct mic_vdev *mvdev = data;
struct mic_device *mdev = mvdev->mdev;
- mdev->ops->ack_interrupt(mdev);
+ mdev->ops->intr_workarounds(mdev);
schedule_work(&mvdev->virtio_bh_work);
return IRQ_HANDLED;
}
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c
index 0dfa8a8..5562fdd 100644
--- a/drivers/misc/mic/host/mic_x100.c
+++ b/drivers/misc/mic/host/mic_x100.c
@@ -174,35 +174,38 @@
}
/**
- * mic_ack_interrupt - Device specific interrupt handling.
- * @mdev: pointer to mic_device instance
+ * mic_x100_ack_interrupt - Read the interrupt sources register and
+ * clear it. This function will be called in the MSI/INTx case.
+ * @mdev: Pointer to mic_device instance.
*
- * Returns: bitmask of doorbell events triggered.
+ * Returns: bitmask of interrupt sources triggered.
*/
static u32 mic_x100_ack_interrupt(struct mic_device *mdev)
{
- u32 reg = 0;
- struct mic_mw *mw = &mdev->mmio;
u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0;
+ u32 reg = mic_mmio_read(&mdev->mmio, sicr0);
+ mic_mmio_write(&mdev->mmio, reg, sicr0);
+ return reg;
+}
+
+/**
+ * mic_x100_intr_workarounds - These hardware specific workarounds are
+ * to be invoked everytime an interrupt is handled.
+ * @mdev: Pointer to mic_device instance.
+ *
+ * Returns: none
+ */
+static void mic_x100_intr_workarounds(struct mic_device *mdev)
+{
+ struct mic_mw *mw = &mdev->mmio;
/* Clear pending bit array. */
if (MIC_A0_STEP == mdev->stepping)
mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS +
MIC_X100_SBOX_MSIXPBACR);
- if (mdev->irq_info.num_vectors <= 1) {
- reg = mic_mmio_read(mw, sicr0);
-
- if (unlikely(!reg))
- goto done;
-
- mic_mmio_write(mw, reg, sicr0);
- }
-
if (mdev->stepping >= MIC_B0_STEP)
mdev->intr_ops->enable_interrupts(mdev);
-done:
- return reg;
}
/**
@@ -553,6 +556,7 @@
.write_spad = mic_x100_write_spad,
.send_intr = mic_x100_send_intr,
.ack_interrupt = mic_x100_ack_interrupt,
+ .intr_workarounds = mic_x100_intr_workarounds,
.reset = mic_x100_hw_reset,
.reset_fw_ready = mic_x100_reset_fw_ready,
.is_fw_ready = mic_x100_is_fw_ready,
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 652593f..128d561 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -828,6 +828,7 @@
xpc_allocate_msg_wait(struct xpc_channel *ch)
{
enum xp_retval ret;
+ DEFINE_WAIT(wait);
if (ch->flags & XPC_C_DISCONNECTING) {
DBUG_ON(ch->reason == xpInterrupted);
@@ -835,7 +836,9 @@
}
atomic_inc(&ch->n_on_msg_allocate_wq);
- ret = interruptible_sleep_on_timeout(&ch->msg_allocate_wq, 1);
+ prepare_to_wait(&ch->msg_allocate_wq, &wait, TASK_INTERRUPTIBLE);
+ ret = schedule_timeout(1);
+ finish_wait(&ch->msg_allocate_wq, &wait);
atomic_dec(&ch->n_on_msg_allocate_wq);
if (ch->flags & XPC_C_DISCONNECTING) {
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 8d64b68..3aed525 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -812,7 +812,7 @@
kfree_skb(st_gdata->tx_skb);
st_gdata->tx_skb = NULL;
- tty->ops->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
return;
}
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 96853a0..9d3dbb2 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -531,7 +531,6 @@
/* Flush any pending characters in the driver and discipline. */
tty_ldisc_flush(tty);
tty_driver_flush_buffer(tty);
- tty->ops->flush_buffer(tty);
}
/* send uninstall notification to UIM */
diff --git a/drivers/misc/vmw_vmci/vmci_guest.c b/drivers/misc/vmw_vmci/vmci_guest.c
index c98b03b..d35cda0 100644
--- a/drivers/misc/vmw_vmci/vmci_guest.c
+++ b/drivers/misc/vmw_vmci/vmci_guest.c
@@ -165,7 +165,7 @@
* true if required hypercalls (or fallback hypercalls) are
* supported by the host, false otherwise.
*/
-static bool vmci_check_host_caps(struct pci_dev *pdev)
+static int vmci_check_host_caps(struct pci_dev *pdev)
{
bool result;
struct vmci_resource_query_msg *msg;
@@ -176,7 +176,7 @@
check_msg = kmalloc(msg_size, GFP_KERNEL);
if (!check_msg) {
dev_err(&pdev->dev, "%s: Insufficient memory\n", __func__);
- return false;
+ return -ENOMEM;
}
check_msg->dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
@@ -196,7 +196,7 @@
__func__, result ? "PASSED" : "FAILED");
/* We need the vector. There are no fallbacks. */
- return result;
+ return result ? 0 : -ENXIO;
}
/*
@@ -564,12 +564,14 @@
dev_warn(&pdev->dev,
"VMCI device unable to register notification bitmap with PPN 0x%x\n",
(u32) bitmap_ppn);
+ error = -ENXIO;
goto err_remove_vmci_dev_g;
}
}
/* Check host capabilities. */
- if (!vmci_check_host_caps(pdev))
+ error = vmci_check_host_caps(pdev);
+ if (error)
goto err_remove_bitmap;
/* Enable device. */
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 9637615..76ee775 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2600,8 +2600,6 @@
syba_2p_epp,
syba_1p_ecp,
titan_010l,
- titan_1284p1,
- titan_1284p2,
avlab_1p,
avlab_2p,
oxsemi_952,
@@ -2660,8 +2658,6 @@
/* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
/* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
/* titan_010l */ { 1, { { 3, -1 }, } },
- /* titan_1284p1 */ { 1, { { 0, 1 }, } },
- /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* avlab_1p */ { 1, { { 0, 1}, } },
/* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} },
/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
@@ -2677,8 +2673,8 @@
/* netmos_9705 */ { 1, { { 0, -1 }, } },
/* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} },
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
- /* netmos_9805 */ { 1, { { 0, -1 }, } },
- /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+ /* netmos_9805 */ { 1, { { 0, 1 }, } },
+ /* netmos_9815 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* netmos_9901 */ { 1, { { 0, -1 }, } },
/* netmos_9865 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
@@ -2722,8 +2718,6 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
- { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
- { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
/* AFAVLAB_TK9902 */
{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
@@ -2827,16 +2821,12 @@
if (irq == IRQ_NONE) {
printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
- parport_pc_pci_tbl[i + last_sio].vendor,
- parport_pc_pci_tbl[i + last_sio].device,
- io_lo, io_hi);
+ id->vendor, id->device, io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
printk(KERN_DEBUG
"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
- parport_pc_pci_tbl[i + last_sio].vendor,
- parport_pc_pci_tbl[i + last_sio].device,
- io_lo, io_hi, irq);
+ id->vendor, id->device, io_lo, io_hi, irq);
}
data->ports[count] =
parport_pc_probe_port(io_lo, io_hi, irq,
@@ -2866,8 +2856,6 @@
struct pci_parport_data *data = pci_get_drvdata(dev);
int i;
- pci_set_drvdata(dev, NULL);
-
if (data) {
for (i = data->num - 1; i >= 0; i--)
parport_pc_unregister_port(data->ports[i]);
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index ed3b522..971991b 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -303,7 +303,7 @@
static struct platform_driver bfin_cf_driver = {
.driver = {
- .name = (char *)driver_name,
+ .name = driver_name,
.owner = THIS_MODULE,
},
.probe = bfin_cf_probe,
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 1b206ea..5ea64d0 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -359,7 +359,7 @@
static struct platform_driver electra_cf_driver = {
.driver = {
- .name = (char *)driver_name,
+ .name = driver_name,
.owner = THIS_MODULE,
.of_match_table = electra_cf_match,
},
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 330ef2d..d0611b8 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -21,6 +21,12 @@
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
and EXYNOS SoCs.
+config PHY_MVEBU_SATA
+ def_bool y
+ depends on ARCH_KIRKWOOD || ARCH_DOVE
+ depends on OF
+ select GENERIC_PHY
+
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
depends on ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d0caae9..4e4adc9 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -5,5 +5,6 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 58e0e97..645c867 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -94,19 +94,31 @@
int phy_pm_runtime_get(struct phy *phy)
{
+ int ret;
+
if (!pm_runtime_enabled(&phy->dev))
return -ENOTSUPP;
- return pm_runtime_get(&phy->dev);
+ ret = pm_runtime_get(&phy->dev);
+ if (ret < 0 && ret != -EINPROGRESS)
+ pm_runtime_put_noidle(&phy->dev);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(phy_pm_runtime_get);
int phy_pm_runtime_get_sync(struct phy *phy)
{
+ int ret;
+
if (!pm_runtime_enabled(&phy->dev))
return -ENOTSUPP;
- return pm_runtime_get_sync(&phy->dev);
+ ret = pm_runtime_get_sync(&phy->dev);
+ if (ret < 0)
+ pm_runtime_put_sync(&phy->dev);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(phy_pm_runtime_get_sync);
@@ -155,13 +167,14 @@
return ret;
mutex_lock(&phy->mutex);
- if (phy->init_count++ == 0 && phy->ops->init) {
+ if (phy->init_count == 0 && phy->ops->init) {
ret = phy->ops->init(phy);
if (ret < 0) {
dev_err(&phy->dev, "phy init failed --> %d\n", ret);
goto out;
}
}
+ ++phy->init_count;
out:
mutex_unlock(&phy->mutex);
@@ -179,13 +192,14 @@
return ret;
mutex_lock(&phy->mutex);
- if (--phy->init_count == 0 && phy->ops->exit) {
+ if (phy->init_count == 1 && phy->ops->exit) {
ret = phy->ops->exit(phy);
if (ret < 0) {
dev_err(&phy->dev, "phy exit failed --> %d\n", ret);
goto out;
}
}
+ --phy->init_count;
out:
mutex_unlock(&phy->mutex);
@@ -196,23 +210,27 @@
int phy_power_on(struct phy *phy)
{
- int ret = -ENOTSUPP;
+ int ret;
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
mutex_lock(&phy->mutex);
- if (phy->power_count++ == 0 && phy->ops->power_on) {
+ if (phy->power_count == 0 && phy->ops->power_on) {
ret = phy->ops->power_on(phy);
if (ret < 0) {
dev_err(&phy->dev, "phy poweron failed --> %d\n", ret);
goto out;
}
}
+ ++phy->power_count;
+ mutex_unlock(&phy->mutex);
+ return 0;
out:
mutex_unlock(&phy->mutex);
+ phy_pm_runtime_put_sync(phy);
return ret;
}
@@ -220,22 +238,22 @@
int phy_power_off(struct phy *phy)
{
- int ret = -ENOTSUPP;
+ int ret;
mutex_lock(&phy->mutex);
- if (--phy->power_count == 0 && phy->ops->power_off) {
+ if (phy->power_count == 1 && phy->ops->power_off) {
ret = phy->ops->power_off(phy);
if (ret < 0) {
dev_err(&phy->dev, "phy poweroff failed --> %d\n", ret);
- goto out;
+ mutex_unlock(&phy->mutex);
+ return ret;
}
}
-
-out:
+ --phy->power_count;
mutex_unlock(&phy->mutex);
phy_pm_runtime_put(phy);
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(phy_power_off);
@@ -360,7 +378,7 @@
struct phy *phy_get(struct device *dev, const char *string)
{
int index = 0;
- struct phy *phy = NULL;
+ struct phy *phy;
if (string == NULL) {
dev_WARN(dev, "missing string\n");
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/phy-mvebu-sata.c
new file mode 100644
index 0000000..d43786f
--- /dev/null
+++ b/drivers/phy/phy-mvebu-sata.c
@@ -0,0 +1,137 @@
+/*
+ * phy-mvebu-sata.c: SATA Phy driver for the Marvell mvebu SoCs.
+ *
+ * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+struct priv {
+ struct clk *clk;
+ void __iomem *base;
+};
+
+#define SATA_PHY_MODE_2 0x0330
+#define MODE_2_FORCE_PU_TX BIT(0)
+#define MODE_2_FORCE_PU_RX BIT(1)
+#define MODE_2_PU_PLL BIT(2)
+#define MODE_2_PU_IVREF BIT(3)
+#define SATA_IF_CTRL 0x0050
+#define CTRL_PHY_SHUTDOWN BIT(9)
+
+static int phy_mvebu_sata_power_on(struct phy *phy)
+{
+ struct priv *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ clk_prepare_enable(priv->clk);
+
+ /* Enable PLL and IVREF */
+ reg = readl(priv->base + SATA_PHY_MODE_2);
+ reg |= (MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX |
+ MODE_2_PU_PLL | MODE_2_PU_IVREF);
+ writel(reg , priv->base + SATA_PHY_MODE_2);
+
+ /* Enable PHY */
+ reg = readl(priv->base + SATA_IF_CTRL);
+ reg &= ~CTRL_PHY_SHUTDOWN;
+ writel(reg, priv->base + SATA_IF_CTRL);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static int phy_mvebu_sata_power_off(struct phy *phy)
+{
+ struct priv *priv = phy_get_drvdata(phy);
+ u32 reg;
+
+ clk_prepare_enable(priv->clk);
+
+ /* Disable PLL and IVREF */
+ reg = readl(priv->base + SATA_PHY_MODE_2);
+ reg &= ~(MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX |
+ MODE_2_PU_PLL | MODE_2_PU_IVREF);
+ writel(reg, priv->base + SATA_PHY_MODE_2);
+
+ /* Disable PHY */
+ reg = readl(priv->base + SATA_IF_CTRL);
+ reg |= CTRL_PHY_SHUTDOWN;
+ writel(reg, priv->base + SATA_IF_CTRL);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static struct phy_ops phy_mvebu_sata_ops = {
+ .power_on = phy_mvebu_sata_power_on,
+ .power_off = phy_mvebu_sata_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int phy_mvebu_sata_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ struct priv *priv;
+ struct phy *phy;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(&pdev->dev, "sata");
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ phy_provider = devm_of_phy_provider_register(&pdev->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ phy = devm_phy_create(&pdev->dev, &phy_mvebu_sata_ops, NULL);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+
+ /* The boot loader may of left it on. Turn it off. */
+ phy_mvebu_sata_power_off(phy);
+
+ return 0;
+}
+
+static const struct of_device_id phy_mvebu_sata_of_match[] = {
+ { .compatible = "marvell,mvebu-sata-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, phy_mvebu_sata_of_match);
+
+static struct platform_driver phy_mvebu_sata_driver = {
+ .probe = phy_mvebu_sata_probe,
+ .driver = {
+ .name = "phy-mvebu-sata",
+ .owner = THIS_MODULE,
+ .of_match_table = phy_mvebu_sata_of_match,
+ }
+};
+module_platform_driver(phy_mvebu_sata_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("Marvell MVEBU SATA PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index f7beb6e..a673e5b 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -847,7 +847,7 @@
info->uio_dev = idev;
if (info->irq && (info->irq != UIO_IRQ_CUSTOM)) {
- ret = devm_request_irq(parent, info->irq, uio_interrupt,
+ ret = devm_request_irq(idev->dev, info->irq, uio_interrupt,
info->irq_flags, info->name, idev);
if (ret)
goto err_request_irq;
diff --git a/drivers/uio/uio_mf624.c b/drivers/uio/uio_mf624.c
index f764adb..d1f95a1 100644
--- a/drivers/uio/uio_mf624.c
+++ b/drivers/uio/uio_mf624.c
@@ -228,7 +228,7 @@
kfree(info);
}
-static DEFINE_PCI_DEVICE_TABLE(mf624_pci_id) = {
+static const struct pci_device_id mf624_pci_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_HUMUSOFT, PCI_DEVICE_ID_MF624) },
{ 0, }
};
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 15c7251..1e5d94c 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -46,7 +46,6 @@
struct mxc_w1_device {
void __iomem *regs;
- unsigned int clkdiv;
struct clk *clk;
struct w1_bus_master bus_master;
};
@@ -106,8 +105,10 @@
static int mxc_w1_probe(struct platform_device *pdev)
{
struct mxc_w1_device *mdev;
+ unsigned long clkrate;
struct resource *res;
- int err = 0;
+ unsigned int clkdiv;
+ int err;
mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device),
GFP_KERNEL);
@@ -118,27 +119,39 @@
if (IS_ERR(mdev->clk))
return PTR_ERR(mdev->clk);
- mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1;
+ clkrate = clk_get_rate(mdev->clk);
+ if (clkrate < 10000000)
+ dev_warn(&pdev->dev,
+ "Low clock frequency causes improper function\n");
+
+ clkdiv = DIV_ROUND_CLOSEST(clkrate, 1000000);
+ clkrate /= clkdiv;
+ if ((clkrate < 980000) || (clkrate > 1020000))
+ dev_warn(&pdev->dev,
+ "Incorrect time base frequency %lu Hz\n", clkrate);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mdev->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(mdev->regs))
return PTR_ERR(mdev->regs);
- clk_prepare_enable(mdev->clk);
- __raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER);
+ err = clk_prepare_enable(mdev->clk);
+ if (err)
+ return err;
+
+ __raw_writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
mdev->bus_master.data = mdev;
mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit;
- err = w1_add_master_device(&mdev->bus_master);
-
- if (err)
- return err;
-
platform_set_drvdata(pdev, mdev);
- return 0;
+
+ err = w1_add_master_device(&mdev->bus_master);
+ if (err)
+ clk_disable_unprepare(mdev->clk);
+
+ return err;
}
/*
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 4195810..8900fdf 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -51,6 +51,7 @@
/* if NULL, "0" or "1" will be printed */
const char *state_on;
const char *state_off;
+ bool check_on_resume;
};
#endif /* __EXTCON_GPIO_H__ */
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index cb49417..b319765 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -2196,6 +2196,15 @@
/*
* R677 (0x2A5) - Mic Detect 3
*/
+#define ARIZONA_MICD_LVL_0 0x0004 /* MICD_LVL - [2] */
+#define ARIZONA_MICD_LVL_1 0x0008 /* MICD_LVL - [3] */
+#define ARIZONA_MICD_LVL_2 0x0010 /* MICD_LVL - [4] */
+#define ARIZONA_MICD_LVL_3 0x0020 /* MICD_LVL - [5] */
+#define ARIZONA_MICD_LVL_4 0x0040 /* MICD_LVL - [6] */
+#define ARIZONA_MICD_LVL_5 0x0080 /* MICD_LVL - [7] */
+#define ARIZONA_MICD_LVL_6 0x0100 /* MICD_LVL - [8] */
+#define ARIZONA_MICD_LVL_7 0x0200 /* MICD_LVL - [9] */
+#define ARIZONA_MICD_LVL_8 0x0400 /* MICD_LVL - [10] */
#define ARIZONA_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */
#define ARIZONA_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */
#define ARIZONA_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */
diff --git a/include/uapi/linux/genwqe/genwqe_card.h b/include/uapi/linux/genwqe/genwqe_card.h
new file mode 100644
index 0000000..795e957
--- /dev/null
+++ b/include/uapi/linux/genwqe/genwqe_card.h
@@ -0,0 +1,500 @@
+#ifndef __GENWQE_CARD_H__
+#define __GENWQE_CARD_H__
+
+/**
+ * IBM Accelerator Family 'GenWQE'
+ *
+ * (C) Copyright IBM Corp. 2013
+ *
+ * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
+ * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
+ * Author: Michael Jung <mijung@de.ibm.com>
+ * Author: Michael Ruettger <michael@ibmra.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * User-space API for the GenWQE card. For debugging and test purposes
+ * the register addresses are included here too.
+ */
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/* Basename of sysfs, debugfs and /dev interfaces */
+#define GENWQE_DEVNAME "genwqe"
+
+#define GENWQE_TYPE_ALTERA_230 0x00 /* GenWQE4 Stratix-IV-230 */
+#define GENWQE_TYPE_ALTERA_530 0x01 /* GenWQE4 Stratix-IV-530 */
+#define GENWQE_TYPE_ALTERA_A4 0x02 /* GenWQE5 A4 Stratix-V-A4 */
+#define GENWQE_TYPE_ALTERA_A7 0x03 /* GenWQE5 A7 Stratix-V-A7 */
+
+/* MMIO Unit offsets: Each UnitID occupies a defined address range */
+#define GENWQE_UID_OFFS(uid) ((uid) << 24)
+#define GENWQE_SLU_OFFS GENWQE_UID_OFFS(0)
+#define GENWQE_HSU_OFFS GENWQE_UID_OFFS(1)
+#define GENWQE_APP_OFFS GENWQE_UID_OFFS(2)
+#define GENWQE_MAX_UNITS 3
+
+/* Common offsets per UnitID */
+#define IO_EXTENDED_ERROR_POINTER 0x00000048
+#define IO_ERROR_INJECT_SELECTOR 0x00000060
+#define IO_EXTENDED_DIAG_SELECTOR 0x00000070
+#define IO_EXTENDED_DIAG_READ_MBX 0x00000078
+#define IO_EXTENDED_DIAG_MAP(ring) (0x00000500 | ((ring) << 3))
+
+#define GENWQE_EXTENDED_DIAG_SELECTOR(ring, trace) (((ring) << 8) | (trace))
+
+/* UnitID 0: Service Layer Unit (SLU) */
+
+/* SLU: Unit Configuration Register */
+#define IO_SLU_UNITCFG 0x00000000
+#define IO_SLU_UNITCFG_TYPE_MASK 0x000000000ff00000 /* 27:20 */
+
+/* SLU: Fault Isolation Register (FIR) (ac_slu_fir) */
+#define IO_SLU_FIR 0x00000008 /* read only, wr direct */
+#define IO_SLU_FIR_CLR 0x00000010 /* read and clear */
+
+/* SLU: First Error Capture Register (FEC/WOF) */
+#define IO_SLU_FEC 0x00000018
+
+#define IO_SLU_ERR_ACT_MASK 0x00000020
+#define IO_SLU_ERR_ATTN_MASK 0x00000028
+#define IO_SLU_FIRX1_ACT_MASK 0x00000030
+#define IO_SLU_FIRX0_ACT_MASK 0x00000038
+#define IO_SLU_SEC_LEM_DEBUG_OVR 0x00000040
+#define IO_SLU_EXTENDED_ERR_PTR 0x00000048
+#define IO_SLU_COMMON_CONFIG 0x00000060
+
+#define IO_SLU_FLASH_FIR 0x00000108
+#define IO_SLU_SLC_FIR 0x00000110
+#define IO_SLU_RIU_TRAP 0x00000280
+#define IO_SLU_FLASH_FEC 0x00000308
+#define IO_SLU_SLC_FEC 0x00000310
+
+/*
+ * The Virtual Function's Access is from offset 0x00010000
+ * The Physical Function's Access is from offset 0x00050000
+ * Single Shared Registers exists only at offset 0x00060000
+ *
+ * SLC: Queue Virtual Window Window for accessing into a specific VF
+ * queue. When accessing the 0x10000 space using the 0x50000 address
+ * segment, the value indicated here is used to specify which VF
+ * register is decoded. This register, and the 0x50000 register space
+ * can only be accessed by the PF. Example, if this register is set to
+ * 0x2, then a read from 0x50000 is the same as a read from 0x10000
+ * from VF=2.
+ */
+
+/* SLC: Queue Segment */
+#define IO_SLC_QUEUE_SEGMENT 0x00010000
+#define IO_SLC_VF_QUEUE_SEGMENT 0x00050000
+
+/* SLC: Queue Offset */
+#define IO_SLC_QUEUE_OFFSET 0x00010008
+#define IO_SLC_VF_QUEUE_OFFSET 0x00050008
+
+/* SLC: Queue Configuration */
+#define IO_SLC_QUEUE_CONFIG 0x00010010
+#define IO_SLC_VF_QUEUE_CONFIG 0x00050010
+
+/* SLC: Job Timout/Only accessible for the PF */
+#define IO_SLC_APPJOB_TIMEOUT 0x00010018
+#define IO_SLC_VF_APPJOB_TIMEOUT 0x00050018
+#define TIMEOUT_250MS 0x0000000f
+#define HEARTBEAT_DISABLE 0x0000ff00
+
+/* SLC: Queue InitSequence Register */
+#define IO_SLC_QUEUE_INITSQN 0x00010020
+#define IO_SLC_VF_QUEUE_INITSQN 0x00050020
+
+/* SLC: Queue Wrap */
+#define IO_SLC_QUEUE_WRAP 0x00010028
+#define IO_SLC_VF_QUEUE_WRAP 0x00050028
+
+/* SLC: Queue Status */
+#define IO_SLC_QUEUE_STATUS 0x00010100
+#define IO_SLC_VF_QUEUE_STATUS 0x00050100
+
+/* SLC: Queue Working Time */
+#define IO_SLC_QUEUE_WTIME 0x00010030
+#define IO_SLC_VF_QUEUE_WTIME 0x00050030
+
+/* SLC: Queue Error Counts */
+#define IO_SLC_QUEUE_ERRCNTS 0x00010038
+#define IO_SLC_VF_QUEUE_ERRCNTS 0x00050038
+
+/* SLC: Queue Loast Response Word */
+#define IO_SLC_QUEUE_LRW 0x00010040
+#define IO_SLC_VF_QUEUE_LRW 0x00050040
+
+/* SLC: Freerunning Timer */
+#define IO_SLC_FREE_RUNNING_TIMER 0x00010108
+#define IO_SLC_VF_FREE_RUNNING_TIMER 0x00050108
+
+/* SLC: Queue Virtual Access Region */
+#define IO_PF_SLC_VIRTUAL_REGION 0x00050000
+
+/* SLC: Queue Virtual Window */
+#define IO_PF_SLC_VIRTUAL_WINDOW 0x00060000
+
+/* SLC: DDCB Application Job Pending [n] (n=0:63) */
+#define IO_PF_SLC_JOBPEND(n) (0x00061000 + 8*(n))
+#define IO_SLC_JOBPEND(n) IO_PF_SLC_JOBPEND(n)
+
+/* SLC: Parser Trap RAM [n] (n=0:31) */
+#define IO_SLU_SLC_PARSE_TRAP(n) (0x00011000 + 8*(n))
+
+/* SLC: Dispatcher Trap RAM [n] (n=0:31) */
+#define IO_SLU_SLC_DISP_TRAP(n) (0x00011200 + 8*(n))
+
+/* Global Fault Isolation Register (GFIR) */
+#define IO_SLC_CFGREG_GFIR 0x00020000
+#define GFIR_ERR_TRIGGER 0x0000ffff
+
+/* SLU: Soft Reset Register */
+#define IO_SLC_CFGREG_SOFTRESET 0x00020018
+
+/* SLU: Misc Debug Register */
+#define IO_SLC_MISC_DEBUG 0x00020060
+#define IO_SLC_MISC_DEBUG_CLR 0x00020068
+#define IO_SLC_MISC_DEBUG_SET 0x00020070
+
+/* Temperature Sensor Reading */
+#define IO_SLU_TEMPERATURE_SENSOR 0x00030000
+#define IO_SLU_TEMPERATURE_CONFIG 0x00030008
+
+/* Voltage Margining Control */
+#define IO_SLU_VOLTAGE_CONTROL 0x00030080
+#define IO_SLU_VOLTAGE_NOMINAL 0x00000000
+#define IO_SLU_VOLTAGE_DOWN5 0x00000006
+#define IO_SLU_VOLTAGE_UP5 0x00000007
+
+/* Direct LED Control Register */
+#define IO_SLU_LEDCONTROL 0x00030100
+
+/* SLU: Flashbus Direct Access -A5 */
+#define IO_SLU_FLASH_DIRECTACCESS 0x00040010
+
+/* SLU: Flashbus Direct Access2 -A5 */
+#define IO_SLU_FLASH_DIRECTACCESS2 0x00040020
+
+/* SLU: Flashbus Command Interface -A5 */
+#define IO_SLU_FLASH_CMDINTF 0x00040030
+
+/* SLU: BitStream Loaded */
+#define IO_SLU_BITSTREAM 0x00040040
+
+/* This Register has a switch which will change the CAs to UR */
+#define IO_HSU_ERR_BEHAVIOR 0x01001010
+
+#define IO_SLC2_SQB_TRAP 0x00062000
+#define IO_SLC2_QUEUE_MANAGER_TRAP 0x00062008
+#define IO_SLC2_FLS_MASTER_TRAP 0x00062010
+
+/* UnitID 1: HSU Registers */
+#define IO_HSU_UNITCFG 0x01000000
+#define IO_HSU_FIR 0x01000008
+#define IO_HSU_FIR_CLR 0x01000010
+#define IO_HSU_FEC 0x01000018
+#define IO_HSU_ERR_ACT_MASK 0x01000020
+#define IO_HSU_ERR_ATTN_MASK 0x01000028
+#define IO_HSU_FIRX1_ACT_MASK 0x01000030
+#define IO_HSU_FIRX0_ACT_MASK 0x01000038
+#define IO_HSU_SEC_LEM_DEBUG_OVR 0x01000040
+#define IO_HSU_EXTENDED_ERR_PTR 0x01000048
+#define IO_HSU_COMMON_CONFIG 0x01000060
+
+/* UnitID 2: Application Unit (APP) */
+#define IO_APP_UNITCFG 0x02000000
+#define IO_APP_FIR 0x02000008
+#define IO_APP_FIR_CLR 0x02000010
+#define IO_APP_FEC 0x02000018
+#define IO_APP_ERR_ACT_MASK 0x02000020
+#define IO_APP_ERR_ATTN_MASK 0x02000028
+#define IO_APP_FIRX1_ACT_MASK 0x02000030
+#define IO_APP_FIRX0_ACT_MASK 0x02000038
+#define IO_APP_SEC_LEM_DEBUG_OVR 0x02000040
+#define IO_APP_EXTENDED_ERR_PTR 0x02000048
+#define IO_APP_COMMON_CONFIG 0x02000060
+
+#define IO_APP_DEBUG_REG_01 0x02010000
+#define IO_APP_DEBUG_REG_02 0x02010008
+#define IO_APP_DEBUG_REG_03 0x02010010
+#define IO_APP_DEBUG_REG_04 0x02010018
+#define IO_APP_DEBUG_REG_05 0x02010020
+#define IO_APP_DEBUG_REG_06 0x02010028
+#define IO_APP_DEBUG_REG_07 0x02010030
+#define IO_APP_DEBUG_REG_08 0x02010038
+#define IO_APP_DEBUG_REG_09 0x02010040
+#define IO_APP_DEBUG_REG_10 0x02010048
+#define IO_APP_DEBUG_REG_11 0x02010050
+#define IO_APP_DEBUG_REG_12 0x02010058
+#define IO_APP_DEBUG_REG_13 0x02010060
+#define IO_APP_DEBUG_REG_14 0x02010068
+#define IO_APP_DEBUG_REG_15 0x02010070
+#define IO_APP_DEBUG_REG_16 0x02010078
+#define IO_APP_DEBUG_REG_17 0x02010080
+#define IO_APP_DEBUG_REG_18 0x02010088
+
+/* Read/write from/to registers */
+struct genwqe_reg_io {
+ __u64 num; /* register offset/address */
+ __u64 val64;
+};
+
+/*
+ * All registers of our card will return values not equal this values.
+ * If we see IO_ILLEGAL_VALUE on any of our MMIO register reads, the
+ * card can be considered as unusable. It will need recovery.
+ */
+#define IO_ILLEGAL_VALUE 0xffffffffffffffffull
+
+/*
+ * Generic DDCB execution interface.
+ *
+ * This interface is a first prototype resulting from discussions we
+ * had with other teams which wanted to use the Genwqe card. It allows
+ * to issue a DDCB request in a generic way. The request will block
+ * until it finishes or time out with error.
+ *
+ * Some DDCBs require DMA addresses to be specified in the ASIV
+ * block. The interface provies the capability to let the kernel
+ * driver know where those addresses are by specifying the ATS field,
+ * such that it can replace the user-space addresses with appropriate
+ * DMA addresses or DMA addresses of a scatter gather list which is
+ * dynamically created.
+ *
+ * Our hardware will refuse DDCB execution if the ATS field is not as
+ * expected. That means the DDCB execution engine in the chip knows
+ * where it expects DMA addresses within the ASIV part of the DDCB and
+ * will check that against the ATS field definition. Any invalid or
+ * unknown ATS content will lead to DDCB refusal.
+ */
+
+/* Genwqe chip Units */
+#define DDCB_ACFUNC_SLU 0x00 /* chip service layer unit */
+#define DDCB_ACFUNC_APP 0x01 /* chip application */
+
+/* DDCB return codes (RETC) */
+#define DDCB_RETC_IDLE 0x0000 /* Unexecuted/DDCB created */
+#define DDCB_RETC_PENDING 0x0101 /* Pending Execution */
+#define DDCB_RETC_COMPLETE 0x0102 /* Cmd complete. No error */
+#define DDCB_RETC_FAULT 0x0104 /* App Err, recoverable */
+#define DDCB_RETC_ERROR 0x0108 /* App Err, non-recoverable */
+#define DDCB_RETC_FORCED_ERROR 0x01ff /* overwritten by driver */
+
+#define DDCB_RETC_UNEXEC 0x0110 /* Unexe/Removed from queue */
+#define DDCB_RETC_TERM 0x0120 /* Terminated */
+#define DDCB_RETC_RES0 0x0140 /* Reserved */
+#define DDCB_RETC_RES1 0x0180 /* Reserved */
+
+/* DDCB Command Options (CMDOPT) */
+#define DDCB_OPT_ECHO_FORCE_NO 0x0000 /* ECHO DDCB */
+#define DDCB_OPT_ECHO_FORCE_102 0x0001 /* force return code */
+#define DDCB_OPT_ECHO_FORCE_104 0x0002
+#define DDCB_OPT_ECHO_FORCE_108 0x0003
+
+#define DDCB_OPT_ECHO_FORCE_110 0x0004 /* only on PF ! */
+#define DDCB_OPT_ECHO_FORCE_120 0x0005
+#define DDCB_OPT_ECHO_FORCE_140 0x0006
+#define DDCB_OPT_ECHO_FORCE_180 0x0007
+
+#define DDCB_OPT_ECHO_COPY_NONE (0 << 5)
+#define DDCB_OPT_ECHO_COPY_ALL (1 << 5)
+
+/* Definitions of Service Layer Commands */
+#define SLCMD_ECHO_SYNC 0x00 /* PF/VF */
+#define SLCMD_MOVE_FLASH 0x06 /* PF only */
+#define SLCMD_MOVE_FLASH_FLAGS_MODE 0x03 /* bit 0 and 1 used for mode */
+#define SLCMD_MOVE_FLASH_FLAGS_DLOAD 0 /* mode: download */
+#define SLCMD_MOVE_FLASH_FLAGS_EMUL 1 /* mode: emulation */
+#define SLCMD_MOVE_FLASH_FLAGS_UPLOAD 2 /* mode: upload */
+#define SLCMD_MOVE_FLASH_FLAGS_VERIFY 3 /* mode: verify */
+#define SLCMD_MOVE_FLASH_FLAG_NOTAP (1 << 2)/* just dump DDCB and exit */
+#define SLCMD_MOVE_FLASH_FLAG_POLL (1 << 3)/* wait for RETC >= 0102 */
+#define SLCMD_MOVE_FLASH_FLAG_PARTITION (1 << 4)
+#define SLCMD_MOVE_FLASH_FLAG_ERASE (1 << 5)
+
+enum genwqe_card_state {
+ GENWQE_CARD_UNUSED = 0,
+ GENWQE_CARD_USED = 1,
+ GENWQE_CARD_FATAL_ERROR = 2,
+ GENWQE_CARD_STATE_MAX,
+};
+
+/* common struct for chip image exchange */
+struct genwqe_bitstream {
+ __u64 data_addr; /* pointer to image data */
+ __u32 size; /* size of image file */
+ __u32 crc; /* crc of this image */
+ __u64 target_addr; /* starting address in Flash */
+ __u32 partition; /* '0', '1', or 'v' */
+ __u32 uid; /* 1=host/x=dram */
+
+ __u64 slu_id; /* informational/sim: SluID */
+ __u64 app_id; /* informational/sim: AppID */
+
+ __u16 retc; /* returned from processing */
+ __u16 attn; /* attention code from processing */
+ __u32 progress; /* progress code from processing */
+};
+
+/* Issuing a specific DDCB command */
+#define DDCB_LENGTH 256 /* for debug data */
+#define DDCB_ASIV_LENGTH 104 /* len of the DDCB ASIV array */
+#define DDCB_ASIV_LENGTH_ATS 96 /* ASIV in ATS architecture */
+#define DDCB_ASV_LENGTH 64 /* len of the DDCB ASV array */
+#define DDCB_FIXUPS 12 /* maximum number of fixups */
+
+struct genwqe_debug_data {
+ char driver_version[64];
+ __u64 slu_unitcfg;
+ __u64 app_unitcfg;
+
+ __u8 ddcb_before[DDCB_LENGTH];
+ __u8 ddcb_prev[DDCB_LENGTH];
+ __u8 ddcb_finished[DDCB_LENGTH];
+};
+
+/*
+ * Address Translation Specification (ATS) definitions
+ *
+ * Each 4 bit within the ATS 64-bit word specify the required address
+ * translation at the defined offset.
+ *
+ * 63 LSB
+ * 6666.5555.5555.5544.4444.4443.3333.3333 ... 11
+ * 3210.9876.5432.1098.7654.3210.9876.5432 ... 1098.7654.3210
+ *
+ * offset: 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 ... 0x68 0x70 0x78
+ * res res res res ASIV ...
+ * The first 4 entries in the ATS word are reserved. The following nibbles
+ * each describe at an 8 byte offset the format of the required data.
+ */
+#define ATS_TYPE_DATA 0x0ull /* data */
+#define ATS_TYPE_FLAT_RD 0x4ull /* flat buffer read only */
+#define ATS_TYPE_FLAT_RDWR 0x5ull /* flat buffer read/write */
+#define ATS_TYPE_SGL_RD 0x6ull /* sgl read only */
+#define ATS_TYPE_SGL_RDWR 0x7ull /* sgl read/write */
+
+#define ATS_SET_FLAGS(_struct, _field, _flags) \
+ (((_flags) & 0xf) << (44 - (4 * (offsetof(_struct, _field) / 8))))
+
+#define ATS_GET_FLAGS(_ats, _byte_offs) \
+ (((_ats) >> (44 - (4 * ((_byte_offs) / 8)))) & 0xf)
+
+/**
+ * struct genwqe_ddcb_cmd - User parameter for generic DDCB commands
+ *
+ * On the way into the kernel the driver will read the whole data
+ * structure. On the way out the driver will not copy the ASIV data
+ * back to user-space.
+ */
+struct genwqe_ddcb_cmd {
+ /* START of data copied to/from driver */
+ __u64 next_addr; /* chaining genwqe_ddcb_cmd */
+ __u64 flags; /* reserved */
+
+ __u8 acfunc; /* accelerators functional unit */
+ __u8 cmd; /* command to execute */
+ __u8 asiv_length; /* used parameter length */
+ __u8 asv_length; /* length of valid return values */
+ __u16 cmdopts; /* command options */
+ __u16 retc; /* return code from processing */
+
+ __u16 attn; /* attention code from processing */
+ __u16 vcrc; /* variant crc16 */
+ __u32 progress; /* progress code from processing */
+
+ __u64 deque_ts; /* dequeue time stamp */
+ __u64 cmplt_ts; /* completion time stamp */
+ __u64 disp_ts; /* SW processing start */
+
+ /* move to end and avoid copy-back */
+ __u64 ddata_addr; /* collect debug data */
+
+ /* command specific values */
+ __u8 asv[DDCB_ASV_LENGTH];
+
+ /* END of data copied from driver */
+ union {
+ struct {
+ __u64 ats;
+ __u8 asiv[DDCB_ASIV_LENGTH_ATS];
+ };
+ /* used for flash update to keep it backward compatible */
+ __u8 __asiv[DDCB_ASIV_LENGTH];
+ };
+ /* END of data copied to driver */
+};
+
+#define GENWQE_IOC_CODE 0xa5
+
+/* Access functions */
+#define GENWQE_READ_REG64 _IOR(GENWQE_IOC_CODE, 30, struct genwqe_reg_io)
+#define GENWQE_WRITE_REG64 _IOW(GENWQE_IOC_CODE, 31, struct genwqe_reg_io)
+#define GENWQE_READ_REG32 _IOR(GENWQE_IOC_CODE, 32, struct genwqe_reg_io)
+#define GENWQE_WRITE_REG32 _IOW(GENWQE_IOC_CODE, 33, struct genwqe_reg_io)
+#define GENWQE_READ_REG16 _IOR(GENWQE_IOC_CODE, 34, struct genwqe_reg_io)
+#define GENWQE_WRITE_REG16 _IOW(GENWQE_IOC_CODE, 35, struct genwqe_reg_io)
+
+#define GENWQE_GET_CARD_STATE _IOR(GENWQE_IOC_CODE, 36, enum genwqe_card_state)
+
+/**
+ * struct genwqe_mem - Memory pinning/unpinning information
+ * @addr: virtual user space address
+ * @size: size of the area pin/dma-map/unmap
+ * direction: 0: read/1: read and write
+ *
+ * Avoid pinning and unpinning of memory pages dynamically. Instead
+ * the idea is to pin the whole buffer space required for DDCB
+ * opertionas in advance. The driver will reuse this pinning and the
+ * memory associated with it to setup the sglists for the DDCB
+ * requests without the need to allocate and free memory or map and
+ * unmap to get the DMA addresses.
+ *
+ * The inverse operation needs to be called after the pinning is not
+ * needed anymore. The pinnings else the pinnings will get removed
+ * after the device is closed. Note that pinnings will required
+ * memory.
+ */
+struct genwqe_mem {
+ __u64 addr;
+ __u64 size;
+ __u64 direction;
+ __u64 flags;
+};
+
+#define GENWQE_PIN_MEM _IOWR(GENWQE_IOC_CODE, 40, struct genwqe_mem)
+#define GENWQE_UNPIN_MEM _IOWR(GENWQE_IOC_CODE, 41, struct genwqe_mem)
+
+/*
+ * Generic synchronous DDCB execution interface.
+ * Synchronously execute a DDCB.
+ *
+ * Return: 0 on success or negative error code.
+ * -EINVAL: Invalid parameters (ASIV_LEN, ASV_LEN, illegal fixups
+ * no mappings found/could not create mappings
+ * -EFAULT: illegal addresses in fixups, purging failed
+ * -EBADMSG: enqueing failed, retc != DDCB_RETC_COMPLETE
+ */
+#define GENWQE_EXECUTE_DDCB \
+ _IOWR(GENWQE_IOC_CODE, 50, struct genwqe_ddcb_cmd)
+
+#define GENWQE_EXECUTE_RAW_DDCB \
+ _IOWR(GENWQE_IOC_CODE, 51, struct genwqe_ddcb_cmd)
+
+/* Service Layer functions (PF only) */
+#define GENWQE_SLU_UPDATE _IOWR(GENWQE_IOC_CODE, 80, struct genwqe_bitstream)
+#define GENWQE_SLU_READ _IOWR(GENWQE_IOC_CODE, 81, struct genwqe_bitstream)
+
+#endif /* __GENWQE_CARD_H__ */
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index b8d6d54..4088b81 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -26,7 +26,6 @@
#include <sys/socket.h>
#include <sys/poll.h>
#include <sys/utsname.h>
-#include <linux/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
diff --git a/tools/hv/hv_vss_daemon.c b/tools/hv/hv_vss_daemon.c
index 8bcb040..520de3304 100644
--- a/tools/hv/hv_vss_daemon.c
+++ b/tools/hv/hv_vss_daemon.c
@@ -22,7 +22,6 @@
#include <sys/socket.h>
#include <sys/poll.h>
#include <sys/ioctl.h>
-#include <linux/types.h>
#include <fcntl.h>
#include <stdio.h>
#include <mntent.h>