mmc: host: split up sdhci-pxa, create sdhci-pxav2.c
sdhci-pltfm driver for PXAV2 SoCs, such as pxa910.
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Jun Nie <njun@marvell.com>
Signed-off-by: Qiming Wu <wuqm@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index ab4d9f0..c67edda 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -206,6 +206,19 @@
If unsure, say N.
+config MMC_SDHCI_PXAV2
+ tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
+ depends on CLKDEV_LOOKUP
+ select MMC_SDHCI
+ select MMC_SDHCI_PLTFM
+ default CPU_PXA910
+ help
+ This selects the Marvell(R) PXAV2 SD Host Controller.
+ If you have a PXA9XX platform with SD Host Controller
+ and a card slot, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_SPEAR
tristate "SDHCI support on ST SPEAr platform"
depends on MMC_SDHCI && PLAT_SPEAR
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 688cc52..99f7d79 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(CONFIG_MMC_SDHCI_PXA) += sdhci-pxa.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
+obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
new file mode 100644
index 0000000..7a6fa8c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2010 Marvell International Ltd.
+ * Zhangfei Gao <zhangfei.gao@marvell.com>
+ * Kevin Wang <dwang4@marvell.com>
+ * Jun Nie <njun@marvell.com>
+ * Qiming Wu <wuqm@marvell.com>
+ * Philip Rakity <prakity@marvell.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <plat/sdhci.h>
+#include <linux/slab.h>
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+#define SD_FIFO_PARAM 0xe0
+#define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */
+#define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */
+#define CLK_GATE_CTL 0x0100 /* Clock Gate Control */
+#define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \
+ CLK_GATE_ON | CLK_GATE_CTL)
+
+#define SD_CLOCK_BURST_SIZE_SETUP 0xe6
+#define SDCLK_SEL_SHIFT 8
+#define SDCLK_SEL_MASK 0x3
+#define SDCLK_DELAY_SHIFT 10
+#define SDCLK_DELAY_MASK 0x3c
+
+#define SD_CE_ATA_2 0xea
+#define MMC_CARD 0x1000
+#define MMC_WIDTH 0x0100
+
+static void pxav2_set_private_registers(struct sdhci_host *host, u8 mask)
+{
+ struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
+ struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+
+ if (mask == SDHCI_RESET_ALL) {
+ u16 tmp = 0;
+
+ /*
+ * tune timing of read data/command when crc error happen
+ * no performance impact
+ */
+ if (pdata->clk_delay_sel == 1) {
+ tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+
+ tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
+ tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
+ << SDCLK_DELAY_SHIFT;
+ tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT);
+ tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT;
+
+ writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+ }
+
+ if (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING) {
+ tmp = readw(host->ioaddr + SD_FIFO_PARAM);
+ tmp &= ~CLK_GATE_SETTING_BITS;
+ writew(tmp, host->ioaddr + SD_FIFO_PARAM);
+ } else {
+ tmp = readw(host->ioaddr + SD_FIFO_PARAM);
+ tmp &= ~CLK_GATE_SETTING_BITS;
+ tmp |= CLK_GATE_SETTING_BITS;
+ writew(tmp, host->ioaddr + SD_FIFO_PARAM);
+ }
+ }
+}
+
+static int pxav2_mmc_set_width(struct sdhci_host *host, int width)
+{
+ u8 ctrl;
+ u16 tmp;
+
+ ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+ tmp = readw(host->ioaddr + SD_CE_ATA_2);
+ if (width == MMC_BUS_WIDTH_8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ tmp |= MMC_CARD | MMC_WIDTH;
+ } else {
+ tmp &= ~(MMC_CARD | MMC_WIDTH);
+ if (width == MMC_BUS_WIDTH_4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+ writew(tmp, host->ioaddr + SD_CE_ATA_2);
+ writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+
+ return 0;
+}
+
+static u32 pxav2_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk);
+}
+
+static struct sdhci_ops pxav2_sdhci_ops = {
+ .get_max_clock = pxav2_get_max_clock,
+ .platform_reset_exit = pxav2_set_private_registers,
+ .platform_8bit_width = pxav2_mmc_set_width,
+};
+
+static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host = NULL;
+ struct sdhci_pxa *pxa = NULL;
+ int ret;
+ struct clk *clk;
+
+ pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
+ if (!pxa)
+ return -ENOMEM;
+
+ host = sdhci_pltfm_init(pdev, NULL);
+ if (IS_ERR(host)) {
+ kfree(pxa);
+ return PTR_ERR(host);
+ }
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = pxa;
+
+ clk = clk_get(dev, "PXA-SDHCLK");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get io clock\n");
+ ret = PTR_ERR(clk);
+ goto err_clk_get;
+ }
+ pltfm_host->clk = clk;
+ clk_enable(clk);
+
+ host->quirks = SDHCI_QUIRK_BROKEN_ADMA
+ | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
+ | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
+
+ if (pdata) {
+ if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
+ /* on-chip device */
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+ }
+
+ /* If slot design supports 8 bit data, indicate this to MMC. */
+ if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
+ if (pdata->quirks)
+ host->quirks |= pdata->quirks;
+ if (pdata->host_caps)
+ host->mmc->caps |= pdata->host_caps;
+ if (pdata->pm_caps)
+ host->mmc->pm_caps |= pdata->pm_caps;
+ }
+
+ host->ops = &pxav2_sdhci_ops;
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add host\n");
+ goto err_add_host;
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+
+err_add_host:
+ clk_disable(clk);
+ clk_put(clk);
+err_clk_get:
+ sdhci_pltfm_free(pdev);
+ kfree(pxa);
+ return ret;
+}
+
+static int __devexit sdhci_pxav2_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
+
+ sdhci_remove_host(host, 1);
+
+ clk_disable(pltfm_host->clk);
+ clk_put(pltfm_host->clk);
+ sdhci_pltfm_free(pdev);
+ kfree(pxa);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_pxav2_driver = {
+ .driver = {
+ .name = "sdhci-pxav2",
+ .owner = THIS_MODULE,
+ },
+ .probe = sdhci_pxav2_probe,
+ .remove = __devexit_p(sdhci_pxav2_remove),
+#ifdef CONFIG_PM
+ .suspend = sdhci_pltfm_suspend,
+ .resume = sdhci_pltfm_resume,
+#endif
+};
+static int __init sdhci_pxav2_init(void)
+{
+ return platform_driver_register(&sdhci_pxav2_driver);
+}
+
+static void __exit sdhci_pxav2_exit(void)
+{
+ platform_driver_unregister(&sdhci_pxav2_driver);
+}
+
+module_init(sdhci_pxav2_init);
+module_exit(sdhci_pxav2_exit);
+
+MODULE_DESCRIPTION("SDHCI driver for pxav2");
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
+