forcedeth: realtek phy crossover detection
This patch fixes an issue seen with the realtek 8201 phy. This phy has a
problem with crossover detection and it needs to be disabled. The
problem only arises on certain switches. Therefore, a module parameter
has been added to allow enabling crossover detection if needed. The
default will be set to disabled.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 73d85b31..35f66d4 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -483,16 +483,22 @@
#define DESC_VER_3 3
/* PHY defines */
-#define PHY_OUI_MARVELL 0x5043
-#define PHY_OUI_CICADA 0x03f1
-#define PHY_OUI_VITESSE 0x01c1
-#define PHY_OUI_REALTEK 0x0732
+#define PHY_OUI_MARVELL 0x5043
+#define PHY_OUI_CICADA 0x03f1
+#define PHY_OUI_VITESSE 0x01c1
+#define PHY_OUI_REALTEK 0x0732
+#define PHY_OUI_REALTEK2 0x0020
#define PHYID1_OUI_MASK 0x03ff
#define PHYID1_OUI_SHFT 6
#define PHYID2_OUI_MASK 0xfc00
#define PHYID2_OUI_SHFT 10
#define PHYID2_MODEL_MASK 0x03f0
-#define PHY_MODEL_MARVELL_E3016 0x220
+#define PHY_MODEL_REALTEK_8211 0x0110
+#define PHY_REV_MASK 0x0001
+#define PHY_REV_REALTEK_8211B 0x0000
+#define PHY_REV_REALTEK_8211C 0x0001
+#define PHY_MODEL_REALTEK_8201 0x0200
+#define PHY_MODEL_MARVELL_E3016 0x0220
#define PHY_MARVELL_E3016_INITMASK 0x0300
#define PHY_CICADA_INIT1 0x0f000
#define PHY_CICADA_INIT2 0x0e00
@@ -519,10 +525,18 @@
#define PHY_REALTEK_INIT_REG1 0x1f
#define PHY_REALTEK_INIT_REG2 0x19
#define PHY_REALTEK_INIT_REG3 0x13
+#define PHY_REALTEK_INIT_REG4 0x14
+#define PHY_REALTEK_INIT_REG5 0x18
+#define PHY_REALTEK_INIT_REG6 0x11
#define PHY_REALTEK_INIT1 0x0000
#define PHY_REALTEK_INIT2 0x8e00
#define PHY_REALTEK_INIT3 0x0001
#define PHY_REALTEK_INIT4 0xad17
+#define PHY_REALTEK_INIT5 0xfb54
+#define PHY_REALTEK_INIT6 0xf5c7
+#define PHY_REALTEK_INIT7 0x1000
+#define PHY_REALTEK_INIT8 0x0003
+#define PHY_REALTEK_INIT_MSK1 0x0003
#define PHY_GIGABIT 0x0100
@@ -701,6 +715,7 @@
int wolenabled;
unsigned int phy_oui;
unsigned int phy_model;
+ unsigned int phy_rev;
u16 gigabit;
int intr_test;
int recover_error;
@@ -714,6 +729,7 @@
u32 txrxctl_bits;
u32 vlanctl_bits;
u32 driver_data;
+ u32 device_id;
u32 register_size;
int rx_csum;
u32 mac_in_use;
@@ -824,6 +840,16 @@
};
static int dma_64bit = NV_DMA_64BIT_ENABLED;
+/*
+ * Crossover Detection
+ * Realtek 8201 phy + some OEM boards do not work properly.
+ */
+enum {
+ NV_CROSSOVER_DETECTION_DISABLED,
+ NV_CROSSOVER_DETECTION_ENABLED
+};
+static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
@@ -1088,25 +1114,53 @@
}
}
if (np->phy_oui == PHY_OUI_REALTEK) {
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+ np->phy_rev == PHY_REV_REALTEK_8211B) {
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
}
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8201) {
+ if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+ phy_reserved |= PHY_REALTEK_INIT7;
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
}
}
@@ -1246,26 +1300,71 @@
}
}
if (np->phy_oui == PHY_OUI_REALTEK) {
- /* reset could have cleared these out, set them back */
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+ np->phy_rev == PHY_REV_REALTEK_8211B) {
+ /* reset could have cleared these out, set them back */
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
}
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
- }
- if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
- printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
- return PHY_ERROR;
+ if (np->phy_model == PHY_MODEL_REALTEK_8201) {
+ if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
+ np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+ phy_reserved |= PHY_REALTEK_INIT7;
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
+ if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
+ phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
+ phy_reserved |= PHY_REALTEK_INIT3;
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
}
}
@@ -5254,6 +5353,8 @@
/* copy of driver data */
np->driver_data = id->driver_data;
+ /* copy of device id */
+ np->device_id = id->device;
/* handle different descriptor versions */
if (id->driver_data & DEV_HAS_HIGH_DMA) {
@@ -5543,6 +5644,14 @@
pci_name(pci_dev), id1, id2, phyaddr);
np->phyaddr = phyaddr;
np->phy_oui = id1 | id2;
+
+ /* Realtek hardcoded phy id1 to all zero's on certain phys */
+ if (np->phy_oui == PHY_OUI_REALTEK2)
+ np->phy_oui = PHY_OUI_REALTEK;
+ /* Setup phy revision for Realtek */
+ if (np->phy_oui == PHY_OUI_REALTEK && np->phy_model == PHY_MODEL_REALTEK_8211)
+ np->phy_rev = mii_rw(dev, phyaddr, MII_RESV1, MII_READ) & PHY_REV_MASK;
+
break;
}
if (i == 33) {
@@ -5621,6 +5730,28 @@
return err;
}
+static void nv_restore_phy(struct net_device *dev)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u16 phy_reserved, mii_control;
+
+ if (np->phy_oui == PHY_OUI_REALTEK &&
+ np->phy_model == PHY_MODEL_REALTEK_8201 &&
+ phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
+ mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3);
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
+ phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
+ phy_reserved |= PHY_REALTEK_INIT8;
+ mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved);
+ mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1);
+
+ /* restart auto negotiation */
+ mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+ mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+ mii_rw(dev, np->phyaddr, MII_BMCR, mii_control);
+ }
+}
+
static void __devexit nv_remove(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
@@ -5637,6 +5768,9 @@
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
+ /* restore any phy related changes */
+ nv_restore_phy(dev);
+
/* free all structures */
free_rings(dev);
iounmap(get_hwbase(dev));
@@ -5888,6 +6022,8 @@
MODULE_PARM_DESC(msix, "MSIX interrupts are enabled by setting to 1 and disabled by setting to 0.");
module_param(dma_64bit, int, 0);
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_cross, int, 0);
+MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");